From 6c2e94033df5ca11149e52dd179b8dde3172e9bf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 7 Nov 2008 12:33:49 +0100 Subject: x86: apic honour irq affinity which was set in early boot setup_ioapic_dest() is called after the non boot cpus have been brought up. It sets the irq affinity of all already configured interrupts to all cpus and ignores affinity settings which were done by the early bootup code. If the IRQ_NO_BALANCING or IRQ_AFFINITY_SET flags are set then use the affinity mask from the irq descriptor and not TARGET_CPUS. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index 7a3f2028e2e..988ee89467d 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -3761,7 +3761,9 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; + struct irq_desc *desc; struct irq_cfg *cfg; + cpumask_t mask; if (skip_ioapic_setup == 1) return; @@ -3778,16 +3780,30 @@ void __init setup_ioapic_dest(void) * cpu is online. */ cfg = irq_cfg(irq); - if (!cfg->vector) + if (!cfg->vector) { setup_IO_APIC_irq(ioapic, pin, irq, irq_trigger(irq_entry), irq_polarity(irq_entry)); + continue; + + } + + /* + * Honour affinities which have been set in early boot + */ + desc = irq_to_desc(irq); + if (desc->status & + (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) + mask = desc->affinity; + else + mask = TARGET_CPUS; + #ifdef CONFIG_INTR_REMAP - else if (intr_remapping_enabled) - set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); -#endif + if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq(irq, mask); else - set_ioapic_affinity_irq(irq, TARGET_CPUS); +#endif + set_ioapic_affinity_irq(irq, mask); } } -- cgit v1.2.3 From 5907630ffc2b2d133de2db18963ee5a6c5af7878 Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Wed, 29 Oct 2008 11:41:14 +0000 Subject: powerpc/40x: Limit allocable DRAM during early mapping If the size of DRAM is not an exact power of two, we may not have covered DRAM in its entirety with large 16 and 4 MiB pages. If that is the case, we can get non-recoverable page faults when doing the final PTE mappings for the non-large page PTEs. Consequently, we restrict the top end of DRAM currently allocable by updating '__initial_memory_limit_addr' so that calls to the LMB to allocate PTEs for "tail" coverage with normal-sized pages (or other reasons) do not attempt to allocate outside the allowed range. Signed-off-by: Grant Erickson Signed-off-by: Josh Boyer --- arch/powerpc/mm/40x_mmu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index cecbbc76f62..29954dc2894 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -93,7 +93,7 @@ void __init MMU_init_hw(void) unsigned long __init mmu_mapin_ram(void) { - unsigned long v, s; + unsigned long v, s, mapped; phys_addr_t p; v = KERNELBASE; @@ -130,5 +130,17 @@ unsigned long __init mmu_mapin_ram(void) s -= LARGE_PAGE_SIZE_4M; } - return total_lowmem - s; + mapped = total_lowmem - s; + + /* If the size of RAM is not an exact power of two, we may not + * have covered RAM in its entirety with 16 and 4 MiB + * pages. Consequently, restrict the top end of RAM currently + * allocable so that calls to the LMB to allocate PTEs for "tail" + * coverage with normal-sized pages (or other reasons) do not + * attempt to allocate outside the allowed range. + */ + + __initial_memory_limit_addr = memstart_addr + mapped; + + return mapped; } -- cgit v1.2.3 From 6612d9b0b8208c2ade3a16b8302a271ec81d45f6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 11 Nov 2008 16:02:43 +0000 Subject: powerpc/44x: Fix 460EX/460GT machine check handling Those cores use the 440A type machine check (ie, they have MCSRR0/MCSRR1). They thus need to call the appropriate fixup function to hook the right variant of the exception. Without this, all machine checks become fatal due to loss of context when entering the exception handler. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Josh Boyer --- arch/powerpc/kernel/cpu_setup_44x.S | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 80cac984d85..31c18b52aff 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -34,7 +34,12 @@ _GLOBAL(__setup_cpu_440grx) blr _GLOBAL(__setup_cpu_460ex) _GLOBAL(__setup_cpu_460gt) - b __init_fpu_44x + mflr r4 + bl __init_fpu_44x + bl __fixup_440A_mcheck + mtlr r4 + blr + _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck -- cgit v1.2.3 From 847cdf42d589882aca683b6fb65b2c7832e92231 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 05:19:00 -0700 Subject: powerpc/mpc5200: fix bestcomm Kconfig dependencies Without this patch it is possible to select drivers which require bestcomm support without bestcomm support being selected. This patch reworks the bestcomm dependencies to ensure the correct bestcomm tasks are always enabled. Reported-by: Hans Lehmann Signed-off-by: Grant Likely --- arch/powerpc/sysdev/bestcomm/Kconfig | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig index 57cc5656256..0b192a1c429 100644 --- a/arch/powerpc/sysdev/bestcomm/Kconfig +++ b/arch/powerpc/sysdev/bestcomm/Kconfig @@ -17,23 +17,20 @@ config PPC_BESTCOMM answer Y or M. Otherwise say N. config PPC_BESTCOMM_ATA - tristate "Bestcomm ATA task support" + tristate depends on PPC_BESTCOMM - default n help This option enables the support for the ATA task. config PPC_BESTCOMM_FEC - tristate "Bestcomm FEC tasks support" + tristate depends on PPC_BESTCOMM - default n help This option enables the support for the FEC tasks. config PPC_BESTCOMM_GEN_BD - tristate "Bestcomm GenBD tasks support" + tristate depends on PPC_BESTCOMM - default n help This option enables the support for the GenBD tasks. -- cgit v1.2.3 From a108096878aa6cb744b5280ca59395b6c0152d14 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 09:59:48 -0700 Subject: powerpc/virtex: fix various format/casting printk mismatches Various printk format string in code used by the Xilinx Virtex platform are not 32-bit/64-bit safe. Add correct casting to fix the bugs. Reported-by: Josh Boyer Signed-off-by: Grant Likely Acked-by: Josh Boyer --- arch/powerpc/sysdev/xilinx_intc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index b7aefd0d45c..a22e1a2df1a 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -107,8 +107,8 @@ xilinx_intc_init(struct device_node *np) } regs = ioremap(res.start, 32); - printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n", - res.start, regs); + printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n", + (unsigned long long) res.start, regs); /* Setup interrupt controller */ out_be32(regs + XINTC_IER, 0); /* disable all irqs */ -- cgit v1.2.3 From c7c2ffb4fb92ad79e842226aa547adb5bd045b86 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 10:22:02 -0700 Subject: powerpc/52xx: update defconfigs Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 169 ++++++-- arch/powerpc/configs/52xx/lite5200b_defconfig | 206 ++++++--- arch/powerpc/configs/52xx/motionpro_defconfig | 168 ++++++-- arch/powerpc/configs/52xx/pcm030_defconfig | 182 +++++--- arch/powerpc/configs/52xx/tqm5200_defconfig | 180 ++++++-- arch/powerpc/configs/mpc5200_defconfig | 573 ++++++++++++++++++++------ 6 files changed, 1117 insertions(+), 361 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index c10f7395aa1..3df627494b6 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:11:37 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:12:40 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -110,9 +112,13 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -123,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -137,19 +144,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -159,7 +163,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -183,7 +190,6 @@ CONFIG_PPC_BESTCOMM_FEC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -197,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -211,19 +219,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,7 +242,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -254,10 +263,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -308,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -328,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -446,6 +446,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -487,11 +488,11 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -521,6 +522,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y @@ -532,7 +536,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -567,6 +570,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -596,25 +600,40 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -623,10 +642,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -640,24 +662,39 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -672,10 +709,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -695,11 +728,16 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -710,12 +748,16 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -744,7 +786,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -757,7 +798,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -773,14 +814,19 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -792,12 +838,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -830,6 +877,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -860,6 +908,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -870,14 +919,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -953,9 +1002,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -982,9 +1031,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -998,16 +1050,37 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1018,14 +1091,19 @@ CONFIG_SCHED_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1063,6 +1141,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1093,6 +1175,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 1a8a250fa11..5b969f9c925 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:12:56 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:10:16 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -103,7 +104,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -111,24 +114,30 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,19 +152,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -165,7 +171,10 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -198,11 +207,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,19 +228,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y @@ -243,7 +255,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -269,10 +281,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -323,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -343,14 +352,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -390,12 +393,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -412,7 +419,7 @@ CONFIG_SCSI_DMA=y # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -474,12 +481,12 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -535,18 +542,22 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -583,16 +594,19 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -605,22 +619,27 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -628,7 +647,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -657,6 +675,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -691,42 +710,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -735,29 +775,47 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -774,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -787,18 +841,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -810,12 +872,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -845,6 +908,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -864,6 +928,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -874,14 +939,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -902,9 +967,9 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -929,9 +994,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -945,17 +1013,37 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -966,14 +1054,19 @@ CONFIG_DEBUG_INFO=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1012,6 +1105,10 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1042,6 +1139,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 8c7ba7c6ba4..3c0d4e56172 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:12:22 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:11:02 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -110,9 +112,13 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -123,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -137,19 +144,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -159,7 +163,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -183,7 +190,6 @@ CONFIG_PPC_BESTCOMM_FEC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -197,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -211,19 +219,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,7 +242,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -254,10 +263,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -308,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -328,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,9 +445,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,10 +493,10 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set CONFIG_PATA_MPC52xx=y @@ -501,7 +504,6 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +533,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y @@ -542,7 +547,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set @@ -568,6 +572,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -596,24 +601,39 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -622,10 +642,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -633,6 +656,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set @@ -675,6 +699,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -683,24 +708,39 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_MPC5200_WDT is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -715,10 +755,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -729,6 +765,7 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -736,7 +773,9 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -767,6 +806,8 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -776,19 +817,25 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -800,12 +847,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -838,6 +886,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -868,6 +917,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -878,14 +928,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -961,9 +1011,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -990,9 +1040,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1006,16 +1059,37 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1026,14 +1100,19 @@ CONFIG_DEBUG_INFO=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1071,6 +1150,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1101,6 +1184,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 9c0caa488b2..9d0207783d6 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:13:19 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:13:16 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -104,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -112,24 +115,30 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,19 +153,16 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -166,7 +172,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -199,12 +208,14 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -219,17 +230,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -240,7 +253,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -265,10 +278,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -313,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,14 +343,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -484,12 +488,12 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -545,18 +549,22 @@ CONFIG_PATA_MPC52xx=m # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -593,10 +601,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -606,7 +618,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -644,6 +655,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -675,43 +687,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -720,29 +753,47 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -759,10 +810,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -781,12 +828,17 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_SOC is not set CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -799,12 +851,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -833,7 +890,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -846,7 +902,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -862,10 +918,14 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=m @@ -894,6 +954,8 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -903,19 +965,25 @@ CONFIG_RTC_DRV_PCF8563=m # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -927,12 +995,13 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -964,6 +1033,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -994,6 +1064,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1004,13 +1075,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1070,9 +1141,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1098,7 +1169,17 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1108,6 +1189,7 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 7672bfba356..bc190051e8d 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Tue Apr 29 07:12:39 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:09:30 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -110,14 +112,19 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -128,6 +135,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,19 +150,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set @@ -164,7 +169,10 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -188,7 +196,6 @@ CONFIG_PPC_BESTCOMM_FEC=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -202,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -216,19 +225,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -238,7 +248,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -259,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -313,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,14 +340,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -451,6 +452,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -495,10 +497,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_FSL is not set CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set CONFIG_PATA_MPC52xx=y @@ -507,7 +509,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +538,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y @@ -548,7 +552,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -583,6 +586,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -611,26 +615,41 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -639,10 +658,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -650,6 +672,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set @@ -692,6 +715,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -705,24 +729,39 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -737,10 +776,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -760,11 +795,16 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -775,12 +815,16 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -809,7 +853,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -822,7 +865,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -838,10 +881,13 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -872,6 +918,8 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -881,19 +929,25 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -905,12 +959,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -943,6 +998,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -973,6 +1029,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -983,14 +1040,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1066,9 +1123,9 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1095,9 +1152,12 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1111,17 +1171,37 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1132,14 +1212,19 @@ CONFIG_DEBUG_INFO=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1178,6 +1263,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1208,6 +1297,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 740c9f2b7de..15c5604d0b2 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Fri Jan 18 14:19:54 2008 +# Linux kernel version: 2.6.28-rc4 +# Thu Nov 13 02:09:07 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,18 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -47,7 +51,8 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -66,17 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -88,32 +91,49 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -127,29 +147,34 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set CONFIG_PPC_MPC52xx=y -CONFIG_PPC_MPC5200=y -CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y +CONFIG_PPC_MPC5200_BUGFIX=y +# CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set CONFIG_PPC_NATIVE=y # CONFIG_UDBG_RTAS_CONSOLE is not set +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -163,7 +188,6 @@ CONFIG_RTAS_PROC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y @@ -183,12 +207,18 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -198,26 +228,25 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_HIBERNATION is not set +CONFIG_SUSPEND_FREEZER=y CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="" CONFIG_ISA_DMA_API=y # @@ -226,7 +255,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set -CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -237,6 +266,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,15 +276,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# CONFIG_NET=y # @@ -267,6 +293,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -297,8 +324,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -306,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -322,17 +348,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -357,6 +378,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -428,6 +451,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -444,14 +468,20 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -516,6 +546,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -528,9 +559,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -540,7 +575,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -570,6 +604,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -586,25 +621,28 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y # CONFIG_PATA_OF_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -620,6 +658,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -634,10 +673,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -647,6 +690,7 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -662,7 +706,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -672,7 +715,30 @@ CONFIG_FEC_MPC52xx_MDIO=y # # Input device support # -# CONFIG_INPUT is not set +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set # # Hardware I/O ports @@ -683,8 +749,14 @@ CONFIG_FEC_MPC52xx_MDIO=y # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -718,16 +790,15 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set @@ -735,52 +806,64 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_M41T00 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -788,7 +871,9 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -818,6 +903,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -827,9 +913,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -837,6 +926,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set # CONFIG_MPC5200_WDT is not set # CONFIG_WATCHDOG_RTAS is not set @@ -850,23 +940,39 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -874,11 +980,78 @@ CONFIG_DAB=y # Graphics support # # CONFIG_AGP is not set -# CONFIG_DRM is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +CONFIG_FB_MACMODES=y +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set # # Display device support @@ -886,15 +1059,64 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_DISPLAY_SUPPORT is not set # -# Sound -# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +# CONFIG_HID_APPLE is not set +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +# CONFIG_HID_CHICONY is not set +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -903,14 +1125,20 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PPC_OF=y @@ -923,12 +1151,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -948,7 +1181,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -956,15 +1191,10 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -973,7 +1203,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -989,18 +1219,14 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS is not set # # LED drivers @@ -1009,17 +1235,15 @@ CONFIG_LEDS_CLASS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1031,21 +1255,19 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1072,6 +1294,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1101,8 +1324,11 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1110,15 +1336,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1173,7 +1398,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines @@ -1181,6 +1405,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1191,7 +1416,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1199,6 +1424,7 @@ CONFIG_HAS_DMA=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1206,10 +1432,14 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1220,17 +1450,39 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1240,47 +1492,98 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From c8d698849e135780738c2cb08f07f06eda982a8c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 14 Nov 2008 11:10:55 -0700 Subject: powerpc/virtex: Update defconfigs Update defconfigs for running on Xilinx Virtex platforms Signed-off-by: Grant Likely --- arch/powerpc/configs/40x/virtex_defconfig | 1176 ++++++++++++++++++++++++++++ arch/powerpc/configs/44x/virtex5_defconfig | 234 +++--- arch/powerpc/configs/ppc40x_defconfig | 92 ++- arch/powerpc/configs/ppc44x_defconfig | 92 ++- 4 files changed, 1469 insertions(+), 125 deletions(-) create mode 100644 arch/powerpc/configs/40x/virtex_defconfig (limited to 'arch') diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig new file mode 100644 index 00000000000..9a9350ded29 --- /dev/null +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -0,0 +1,1176 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 10:49:16 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC4xx_GPIO is not set +CONFIG_XILINX_VIRTEX=y +# CONFIG_ACADIA is not set +# CONFIG_EP405 is not set +# CONFIG_HCU4 is not set +# CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set +# CONFIG_WALNUT is not set +CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y +# CONFIG_PPC40x_SIMPLE is not set +CONFIG_XILINX_VIRTEX_II_PRO=y +CONFIG_XILINX_VIRTEX_4_FX=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XILINX_SYSACE=y +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_XILINX_XPS_PS2=y +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +CONFIG_XILINX_HWICAP=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_XILINX=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_XILINX=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 663ec512b33..7513d360e0b 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Tue Aug 5 09:20:16 2008 +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 10:31:16 2008 # # CONFIG_PPC64 is not set @@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -40,6 +39,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -93,8 +93,8 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,7 +109,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -122,10 +124,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +156,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # @@ -174,9 +173,13 @@ CONFIG_CLASSIC_RCU=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_ARCHES is not set # CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set # CONFIG_YOSEMITE is not set CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +# CONFIG_PPC44x_SIMPLE is not set +# CONFIG_PPC4xx_GPIO is not set CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_5_FXT=y # CONFIG_IPIC is not set @@ -196,7 +199,6 @@ CONFIG_XILINX_VIRTEX_5_FXT=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -211,6 +213,8 @@ CONFIG_HZ=250 CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -225,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +260,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -317,7 +322,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -352,8 +356,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set @@ -361,36 +365,38 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_LOG is not set @@ -411,6 +417,7 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -431,11 +438,10 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -455,11 +461,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -478,7 +486,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set +CONFIG_XILINX_SYSACE=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set @@ -487,6 +495,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -534,8 +543,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -556,6 +569,7 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -604,6 +618,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -611,9 +626,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -624,11 +641,11 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set +CONFIG_SERIO_XILINX_XPS_PS2=y # CONFIG_GAMEPORT is not set # @@ -656,11 +673,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -674,87 +692,41 @@ CONFIG_XILINX_HWICAP=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y # -# I2C system bus drivers (mostly embedded / system-on-chip) +# Memory mapped GPIO expanders: # -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set +CONFIG_GPIO_XILINX=y # -# External I2C/SMBus adapter drivers +# I2C GPIO expanders: # -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set # -# Graphics adapter I2C/DDC channel drivers +# PCI GPIO expanders: # -# CONFIG_I2C_VOODOO3 is not set +# CONFIG_GPIO_BT8XX is not set # -# Other I2C/SMBus bus drivers +# SPI GPIO expanders: # -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_ALGO=y -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -763,6 +735,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -790,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -826,6 +801,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -838,6 +814,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_IBM_GXT4500 is not set CONFIG_FB_XILINX=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -870,6 +848,7 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -879,6 +858,8 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -887,10 +868,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -899,7 +881,7 @@ CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -923,6 +905,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -954,19 +937,15 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1023,7 +1002,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1041,7 +1019,7 @@ CONFIG_HAVE_LMB=y # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 @@ -1049,19 +1027,62 @@ CONFIG_FRAME_WARN=1024 # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1069,12 +1090,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1147,6 +1170,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index c15c91deb2a..4256e2c4534 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:56:44 2008 +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 09:54:44 2008 # # CONFIG_PPC64 is not set @@ -500,15 +500,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set +CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -632,7 +634,13 @@ CONFIG_NETDEV_10000=y # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=m +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_XILINX_XPS_PS2=m # CONFIG_GAMEPORT is not set # @@ -660,7 +668,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -756,6 +765,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_XILINX=y + # # I2C GPIO expanders: # @@ -776,11 +790,11 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -792,6 +806,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -816,13 +831,65 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set +CONFIG_FB=m +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_XILINX=m +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -851,6 +918,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1077,10 +1145,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 55edbd545b6..cfc94cfcf4c 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:28:58 2008 +# Linux kernel version: 2.6.28-rc4 +# Fri Nov 14 10:06:19 2008 # # CONFIG_PPC64 is not set @@ -506,15 +506,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_XILINX_SYSACE is not set +CONFIG_XILINX_SYSACE=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -680,7 +682,13 @@ CONFIG_NETDEV_10000=y # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=m +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_XILINX_XPS_PS2=m # CONFIG_GAMEPORT is not set # @@ -708,7 +716,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support # -# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -805,6 +814,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_XILINX=y + # # I2C GPIO expanders: # @@ -826,11 +840,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -842,6 +856,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -866,13 +881,65 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=m +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +CONFIG_FB_XILINX=m +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1002,6 +1069,7 @@ CONFIG_USB_STORAGE=m # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1227,10 +1295,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set -- cgit v1.2.3 From a4a16beadea041ab601e65b264b568e8b6b4f68d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 10 Nov 2008 09:05:37 +0100 Subject: oprofile: fix an overflow in ppro code reset_value was changed from long to u64 in commit b99170288421c79f0c2efa8b33e26e65f4bb7fb8 (oprofile: Implement Intel architectural perfmon support) But dynamic allocation of this array use a wrong type (long instead of u64) Cc: Andi Kleen Signed-off-by: Eric Dumazet Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_ppro.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 3f1b81a83e2..716d26f0e5d 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -69,7 +69,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) int i; if (!reset_value) { - reset_value = kmalloc(sizeof(unsigned) * num_counters, + reset_value = kmalloc(sizeof(reset_value[0]) * num_counters, GFP_ATOMIC); if (!reset_value) return; -- cgit v1.2.3 From f464ff581c247d82fcc0e7ef40c1ca6df9739068 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Wed, 19 Nov 2008 10:40:55 -0800 Subject: powerpc/85xx: L2 cache size wrong in 8572DS dts It's 1MB, not 512KB. Newer U-Boots will fix this entry, but that's no reason to have the wrong value in the dts. Signed-off-by: Trent Piepho Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8572ds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index cadd4652a69..5c69b2fafd3 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -90,7 +90,7 @@ compatible = "fsl,mpc8572-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes - cache-size = <0x80000>; // L2, 512K + cache-size = <0x100000>; // L2, 1M interrupt-parent = <&mpic>; interrupts = <16 2>; }; -- cgit v1.2.3 From 06597aa90a75621639dcaaf5fc07bcb01f752d45 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Tue, 18 Nov 2008 10:55:45 +0000 Subject: powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610 The Marvell PHY driver is currently being used for the 88E1111 on the SBC610. This driver is causing the link to run in 10/Half mode, the generic PHY driver is correctly configuring the PHY as 1000/Full. Edit default config to use generic PHY driver. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 2da13e00a80..07ccaf89f37 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -838,7 +838,7 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=y +# CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -- cgit v1.2.3 From e871809cccc11aaa072afaf746f8fd946d2d9cac Mon Sep 17 00:00:00 2001 From: Michael Barkowski Date: Thu, 13 Nov 2008 10:18:28 -0500 Subject: powerpc/mpc832x_rdb: fix swapped ethernet ids ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so that the interfaces do not swap addresses when control passes from U-Boot to the kernel. Signed-off-by: Michael Barkowski Acked-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc832x_rdb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 226ff066652..dea30910c13 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -18,8 +18,8 @@ #size-cells = <1>; aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; + ethernet0 = &enet1; + ethernet1 = &enet0; serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; -- cgit v1.2.3 From 9bc646f163b136684390081262fab0fd8f5343ca Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 20 Nov 2008 19:08:45 +0600 Subject: x86: fix __cpuinit/__init tangle in init_thread_xstate() Impact: fix incorrect __init annotation This patch removes the following section mismatch warning. A patch set was send previously (http://lkml.org/lkml/2008/11/10/407). But introduce some other problem, reported by Rufus (http://lkml.org/lkml/2008/11/11/46). Then Ingo Molnar suggest that, it's best to remove __init from xsave_cntxt_init(void). Which is the second patch in this series. Now, this one removes the following warning. WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x2237): Section mismatch in reference from the function cpu_init() to the function .init.text:init_thread_xstate() The function __cpuinit cpu_init() references a function __init init_thread_xstate(). If init_thread_xstate is only used by cpu_init then annotate init_thread_xstate with a matching annotation. Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar --- arch/x86/kernel/i387.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 1f20608d4ca..b0f61f0dcd0 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -58,7 +58,7 @@ void __cpuinit mxcsr_feature_mask_init(void) stts(); } -void __init init_thread_xstate(void) +void __cpuinit init_thread_xstate(void) { if (!HAVE_HWFP) { xstate_size = sizeof(struct i387_soft_struct); -- cgit v1.2.3 From bfe085f62f98a49e1b864e4950389c7205174e4f Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 20 Nov 2008 19:12:50 +0600 Subject: x86: fixing __cpuinit/__init tangle, xsave_cntxt_init() Annotate xsave_cntxt_init() as "can be called outside of __init". Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar --- arch/x86/kernel/xsave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index b13acb75e82..15c3e699918 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -310,7 +310,7 @@ static void __init setup_xstate_init(void) /* * Enable and initialize the xsave feature. */ -void __init xsave_cntxt_init(void) +void __ref xsave_cntxt_init(void) { unsigned int eax, ebx, ecx, edx; -- cgit v1.2.3 From 606572634c3faa5b32a8fc430266e6e9d78d2179 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 11 Nov 2008 10:22:22 +1100 Subject: powerpc/spufs: Fix spinning in spufs_ps_fault on signal Currently, we can end up in an infinite loop if we get a signal while the kernel has faulted in spufs_ps_fault. Eg: alarm(1); write(fd, some_spu_psmap_register_address, 4); - the write's copy_from_user will fault on the ps mapping, and signal_pending will be non-zero. Because returning from the fault handler will never clear TIF_SIGPENDING, so we'll just keep faulting, resulting in an unkillable process using 100% of CPU. This change returns VM_FAULT_SIGBUS if there's a fatal signal pending, letting us escape the loop. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/file.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index b73c369cc6f..1b26071a86c 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -390,6 +390,9 @@ static int spufs_ps_fault(struct vm_area_struct *vma, if (offset >= ps_size) return VM_FAULT_SIGBUS; + if (fatal_signal_pending(current)) + return VM_FAULT_SIGBUS; + /* * Because we release the mmap_sem, the context may be destroyed while * we're in spu_wait. Grab an extra reference so it isn't destroyed -- cgit v1.2.3 From a1967d64414dab500e86cbbddf8eae6ad2047903 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 21 Nov 2008 11:16:48 -0800 Subject: x86: revert irq number limitation Impact: fix MSIx not enough irq numbers available regression The manual revert of the sparse_irq patches missed to bring the number of possible irqs back to the .27 status. This resulted in a regression when two multichannel network cards were placed in a system with only one IO_APIC - causing the networking driver to not have the right IRQ and the device not coming up. Remove the dynamic allocation logic leftovers and simply return NR_IRQS in probe_nr_irqs() for now. Fixes: http://lkml.org/lkml/2008/11/19/354 Reported-by: Jesper Dangaard Brouer Signed-off-by: Thomas Gleixner Tested-by: Jesper Dangaard Brouer Acked-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index c9513e1ff28..1fec0f9b150 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -3608,27 +3608,7 @@ int __init io_apic_get_redir_entries (int ioapic) int __init probe_nr_irqs(void) { - int idx; - int nr = 0; -#ifndef CONFIG_XEN - int nr_min = 32; -#else - int nr_min = NR_IRQS; -#endif - - for (idx = 0; idx < nr_ioapics; idx++) - nr += io_apic_get_redir_entries(idx) + 1; - - /* double it for hotplug and msi and nmi */ - nr <<= 1; - - /* something wrong ? */ - if (nr < nr_min) - nr = nr_min; - if (WARN_ON(nr > NR_IRQS)) - nr = NR_IRQS; - - return nr; + return NR_IRQS; } /* -------------------------------------------------------------------------- -- cgit v1.2.3 From 86bbc2c235e500957b213e7e64ce2e0ccb8bc131 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 21 Nov 2008 10:21:33 +0000 Subject: xen: pin correct PGD on suspend Impact: fix Xen guest boot failure commit eefb47f6a1e855653d275cb90592a3587ea93a09 ("xen: use spin_lock_nest_lock when pinning a pagetable") changed xen_pgd_walk to walk over mm->pgd rather than taking pgd as an argument. This breaks xen_mm_(un)pin_all() because it makes init_mm.pgd readonly instead of the pgd we are interested in and therefore the pin subsequently fails. (XEN) mm.c:2280:d15 Bad type (saw 00000000e8000001 != exp 0000000060000000) for mfn bc464 (pfn 21ca7) (XEN) mm.c:2665:d15 Error while pinning mfn bc464 [ 14.586913] 1 multicall(s) failed: cpu 0 [ 14.586926] Pid: 14, comm: kstop/0 Not tainted 2.6.28-rc5-x86_32p-xenU-00172-gee2f6cc #200 [ 14.586940] Call Trace: [ 14.586955] [] ? printk+0x18/0x1e [ 14.586972] [] xen_mc_flush+0x163/0x1d0 [ 14.586986] [] __xen_pgd_pin+0xa1/0x110 [ 14.587000] [] ? stop_cpu+0x0/0xf0 [ 14.587015] [] xen_mm_pin_all+0x4b/0x70 [ 14.587029] [] xen_suspend+0x39/0xe0 [ 14.587042] [] ? stop_cpu+0x0/0xf0 [ 14.587054] [] stop_cpu+0x9d/0xf0 [ 14.587067] [] run_workqueue+0x8d/0x150 [ 14.587080] [] ? _spin_unlock_irqrestore+0x23/0x40 [ 14.587094] [] ? prepare_to_wait+0x3a/0x70 [ 14.587107] [] worker_thread+0x88/0xf0 [ 14.587120] [] ? autoremove_wake_function+0x0/0x50 [ 14.587133] [] ? worker_thread+0x0/0xf0 [ 14.587146] [] kthread+0x3c/0x70 [ 14.587157] [] ? kthread+0x0/0x70 [ 14.587170] [] kernel_thread_helper+0x7/0x10 [ 14.587181] call 1/3: op=14 arg=[c0415000] result=0 [ 14.587192] call 2/3: op=14 arg=[e1ca2000] result=0 [ 14.587204] call 3/3: op=26 arg=[c1808860] result=-22 Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 688936044dc..636ef4caa52 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -661,12 +661,11 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val) * For 64-bit, we must skip the Xen hole in the middle of the address * space, just after the big x86-64 virtual hole. */ -static int xen_pgd_walk(struct mm_struct *mm, - int (*func)(struct mm_struct *mm, struct page *, - enum pt_level), - unsigned long limit) +static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd, + int (*func)(struct mm_struct *mm, struct page *, + enum pt_level), + unsigned long limit) { - pgd_t *pgd = mm->pgd; int flush = 0; unsigned hole_low, hole_high; unsigned pgdidx_limit, pudidx_limit, pmdidx_limit; @@ -753,6 +752,14 @@ out: return flush; } +static int xen_pgd_walk(struct mm_struct *mm, + int (*func)(struct mm_struct *mm, struct page *, + enum pt_level), + unsigned long limit) +{ + return __xen_pgd_walk(mm, mm->pgd, func, limit); +} + /* If we're using split pte locks, then take the page's lock and return a pointer to it. Otherwise return NULL. */ static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm) @@ -854,7 +861,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) xen_mc_batch(); - if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { + if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) { /* re-enable interrupts for flushing */ xen_mc_issue(0); @@ -998,7 +1005,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd) PT_PMD); #endif - xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT); + __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT); xen_mc_issue(0); } -- cgit v1.2.3 From 8ec2e24356e63dc298c6040557faf396410907ac Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 20 Nov 2008 17:26:36 -0800 Subject: MIPS: Make BUG() __noreturn. Often we do things like put BUG() in the default clause of a case statement. Since it was not declared __noreturn, this could sometimes lead to bogus compiler warnings that variables were used uninitialized. There is a small problem in that we have to put a magic while(1); loop to fool GCC into really thinking it is noreturn. This makes the new BUG() function 3 instructions long instead of just 1, but I think it is worth it as it is now unnecessary to do extra work to silence the 'used uninitialized' warnings. I also re-wrote BUG_ON so that if it is given a constant condition, it just does BUG() instead of loading a constant value in to a register and testing it. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/bug.h | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h index 7eb63de808b..08ea46863fe 100644 --- a/arch/mips/include/asm/bug.h +++ b/arch/mips/include/asm/bug.h @@ -7,20 +7,31 @@ #include -#define BUG() \ -do { \ - __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \ -} while (0) +static inline void __noreturn BUG(void) +{ + __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); + /* Fool GCC into thinking the function doesn't return. */ + while (1) + ; +} #define HAVE_ARCH_BUG #if (_MIPS_ISA > _MIPS_ISA_MIPS1) -#define BUG_ON(condition) \ -do { \ - __asm__ __volatile__("tne $0, %0, %1" \ - : : "r" (condition), "i" (BRK_BUG)); \ -} while (0) +static inline void __BUG_ON(unsigned long condition) +{ + if (__builtin_constant_p(condition)) { + if (condition) + BUG(); + else + return; + } + __asm__ __volatile__("tne $0, %0, %1" + : : "r" (condition), "i" (BRK_BUG)); +} + +#define BUG_ON(C) __BUG_ON((unsigned long)(C)) #define HAVE_ARCH_BUG_ON -- cgit v1.2.3 From 5cf02b7bafddb6c3c16ddfb23d3ce187f70528ba Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 25 Nov 2008 00:42:37 -0500 Subject: x86: use limited register constraint for setnz Impact: build fix with certain compilers GCC can decide to use %dil when "r" is used, which is not valid for setnz. This bug was brought out by Stephen Rothwell's merging of the branch tracer into linux-next. [ Thanks to Uros Bizjak for recommending 'q' over 'Q' ] Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- arch/x86/boot/tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c index 0be77b39328..7e8e8b25f5f 100644 --- a/arch/x86/boot/tty.c +++ b/arch/x86/boot/tty.c @@ -74,7 +74,7 @@ static int kbd_pending(void) { u8 pending; asm volatile("int $0x16; setnz %0" - : "=rm" (pending) + : "=qm" (pending) : "a" (0x0100)); return pending; } -- cgit v1.2.3 From eff79aee91dd07e944df65fa448c8baeee7709d8 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 25 Nov 2008 14:13:03 +0100 Subject: arch/x86/kernel/pci-calgary_64.c: change simple_strtol to simple_strtoul Impact: fix theoretical option string parsing overflow Since bridge is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // Signed-off-by: Julia Lawall Cc: muli@il.ibm.com Cc: jdmason@kudzu.us Cc: discuss@x86-64.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-calgary_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index e1e731d78f3..d28bbdc35e4 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1567,7 +1567,7 @@ static int __init calgary_parse_options(char *p) ++p; if (*p == '\0') break; - bridge = simple_strtol(p, &endp, 0); + bridge = simple_strtoul(p, &endp, 0); if (p == endp) break; -- cgit v1.2.3 From 292c669cd7087a090d6420e223eb1072f3e3c50b Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:45:13 +0100 Subject: x86, bts: exclude ds.c from build when disabled Impact: cleanup Move the CONFIG guard from the .c file into the makefile. Reported-by: Andi Kleen Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/ds.c | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index e489ff9cb3e..b62a7667828 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -41,7 +41,7 @@ obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o obj-y += i387.o xsave.o obj-y += ptrace.o -obj-y += ds.o +obj-$(CONFIG_X86_DS) += ds.o obj-$(CONFIG_X86_32) += tls.o obj-$(CONFIG_IA32_EMULATION) += tls.o obj-y += step.o diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index d1a121443bd..4c8d57ec966 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -21,8 +21,6 @@ */ -#ifdef CONFIG_X86_DS - #include #include @@ -878,4 +876,3 @@ void ds_free(struct ds_context *context) while (leftovers--) ds_put_context(context); } -#endif /* CONFIG_X86_DS */ -- cgit v1.2.3 From e5e8ca633bbe972eff6f84e064a63c0c08ed6c3d Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:47:19 +0100 Subject: x86, bts: turn macro into static inline function Impact: cleanup Replace a macro with a static inline function. Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ds.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h index 72c5a190bf4..a95008457ea 100644 --- a/arch/x86/include/asm/ds.h +++ b/arch/x86/include/asm/ds.h @@ -23,12 +23,13 @@ #ifndef _ASM_X86_DS_H #define _ASM_X86_DS_H -#ifdef CONFIG_X86_DS #include #include +#ifdef CONFIG_X86_DS + struct task_struct; /* @@ -232,7 +233,8 @@ extern void ds_free(struct ds_context *context); #else /* CONFIG_X86_DS */ -#define ds_init_intel(config) do {} while (0) +struct cpuinfo_x86; +static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {} #endif /* CONFIG_X86_DS */ #endif /* _ASM_X86_DS_H */ -- cgit v1.2.3 From c4858ffc8f2dc850cb1f609c679b1ac1ad36ef0c Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:49:06 +0100 Subject: x86, pebs: fix PEBS record size configuration Impact: fix DS hw enablement on 64-bit x86 Fix the PEBS record size in the DS configuration. Reported-by: Stephane Eranian Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 4c8d57ec966..04e38ef646a 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -816,13 +816,21 @@ static const struct ds_configuration ds_cfg_var = { .sizeof_ds = sizeof(long) * 12, .sizeof_field = sizeof(long), .sizeof_rec[ds_bts] = sizeof(long) * 3, +#ifdef __i386__ .sizeof_rec[ds_pebs] = sizeof(long) * 10 +#else + .sizeof_rec[ds_pebs] = sizeof(long) * 18 +#endif }; static const struct ds_configuration ds_cfg_64 = { .sizeof_ds = 8 * 12, .sizeof_field = 8, .sizeof_rec[ds_bts] = 8 * 3, +#ifdef __i386__ .sizeof_rec[ds_pebs] = 8 * 10 +#else + .sizeof_rec[ds_pebs] = 8 * 18 +#endif }; static inline void -- cgit v1.2.3 From de90add30e79261c3b5be68bb0f22d2ef98e8113 Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 25 Nov 2008 08:52:56 +0100 Subject: x86, bts: fix wrmsr and spinlock over kmalloc Impact: fix sleeping-with-spinlock-held bugs/crashes - Turn a wrmsr to write the DS_AREA MSR into a wrmsrl. - Use irqsave variants of spinlocks. - Do not allocate memory while holding spinlocks. Reported-by: Stephane Eranian Reported-by: Ingo Molnar Signed-off-by: Markus Metzger Signed-off-by: Ingo Molnar --- arch/x86/kernel/ds.c | 77 +++++++++++++++++++++++++++------------------------- 1 file changed, 40 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 04e38ef646a..a2d1176c38e 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -209,14 +209,15 @@ static DEFINE_PER_CPU(struct ds_context *, system_context); static inline struct ds_context *ds_get_context(struct task_struct *task) { struct ds_context *context; + unsigned long irq; - spin_lock(&ds_lock); + spin_lock_irqsave(&ds_lock, irq); context = (task ? task->thread.ds_ctx : this_system_context); if (context) context->count++; - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); return context; } @@ -224,55 +225,46 @@ static inline struct ds_context *ds_get_context(struct task_struct *task) /* * Same as ds_get_context, but allocates the context and it's DS * structure, if necessary; returns NULL; if out of memory. - * - * pre: requires ds_lock to be held */ static inline struct ds_context *ds_alloc_context(struct task_struct *task) { struct ds_context **p_context = (task ? &task->thread.ds_ctx : &this_system_context); struct ds_context *context = *p_context; + unsigned long irq; if (!context) { - spin_unlock(&ds_lock); - context = kzalloc(sizeof(*context), GFP_KERNEL); - - if (!context) { - spin_lock(&ds_lock); + if (!context) return NULL; - } context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL); if (!context->ds) { kfree(context); - spin_lock(&ds_lock); return NULL; } - spin_lock(&ds_lock); - /* - * Check for race - another CPU could have allocated - * it meanwhile: - */ + spin_lock_irqsave(&ds_lock, irq); + if (*p_context) { kfree(context->ds); kfree(context); - return *p_context; - } - - *p_context = context; - context->this = p_context; - context->task = task; + context = *p_context; + } else { + *p_context = context; - if (task) - set_tsk_thread_flag(task, TIF_DS_AREA_MSR); + context->this = p_context; + context->task = task; - if (!task || (task == current)) - wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0); + if (task) + set_tsk_thread_flag(task, TIF_DS_AREA_MSR); - get_tracer(task); + if (!task || (task == current)) + wrmsrl(MSR_IA32_DS_AREA, + (unsigned long)context->ds); + } + spin_unlock_irqrestore(&ds_lock, irq); } context->count++; @@ -286,10 +278,12 @@ static inline struct ds_context *ds_alloc_context(struct task_struct *task) */ static inline void ds_put_context(struct ds_context *context) { + unsigned long irq; + if (!context) return; - spin_lock(&ds_lock); + spin_lock_irqsave(&ds_lock, irq); if (--context->count) goto out; @@ -311,7 +305,7 @@ static inline void ds_put_context(struct ds_context *context) kfree(context->ds); kfree(context); out: - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); } @@ -382,6 +376,7 @@ static int ds_request(struct task_struct *task, void *base, size_t size, struct ds_context *context; unsigned long buffer, adj; const unsigned long alignment = (1 << 3); + unsigned long irq; int error = 0; if (!ds_cfg.sizeof_ds) @@ -396,26 +391,27 @@ static int ds_request(struct task_struct *task, void *base, size_t size, return -EOPNOTSUPP; - spin_lock(&ds_lock); - - error = -ENOMEM; context = ds_alloc_context(task); if (!context) - goto out_unlock; + return -ENOMEM; + + spin_lock_irqsave(&ds_lock, irq); error = -EPERM; if (!check_tracer(task)) goto out_unlock; + get_tracer(task); + error = -EALREADY; if (context->owner[qual] == current) - goto out_unlock; + goto out_put_tracer; error = -EPERM; if (context->owner[qual] != NULL) - goto out_unlock; + goto out_put_tracer; context->owner[qual] = current; - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); error = -ENOMEM; @@ -463,10 +459,17 @@ static int ds_request(struct task_struct *task, void *base, size_t size, out_release: context->owner[qual] = NULL; ds_put_context(context); + put_tracer(task); + return error; + + out_put_tracer: + spin_unlock_irqrestore(&ds_lock, irq); + ds_put_context(context); + put_tracer(task); return error; out_unlock: - spin_unlock(&ds_lock); + spin_unlock_irqrestore(&ds_lock, irq); ds_put_context(context); return error; } -- cgit v1.2.3 From a266d9f1253a38ec2d5655ebcd6846298b0554f4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 21 Nov 2008 14:49:25 +0100 Subject: [CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value A workaround for AMD CPU family 11h erratum 311 might cause that the P-state Status Register shows a "current P-state" which is larger than the "current P-state limit" in P-state Current Limit Register. For the wrong P-state value there is no ACPI _PSS object defined and powernow-k8/cpufreq can't determine the proper CPU frequency for that state. As a consequence this can cause a panic during boot (potentially with all recent kernel versions -- at least I have reproduced it with various 2.6.27 kernels and with the current .28 series), as an example: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 \ ) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) BUG: unable to handle kernel paging request at ffff88086e7528b8 IP: [] cpufreq_stats_update+0x4a/0x5f PGD 202063 PUD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 1 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.28-rc3-dirty #16 RIP: 0010:[] [] cpufreq_stats_update+0x4a/0\ f Synaptics claims to have extended capabilities, but I'm not able to read them.<6\ 6 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88006e7528c0 RDX: 00000000ffffffff RSI: ffff88006e54af00 RDI: ffffffff808f056c RBP: 00000000fffee697 R08: 0000000000000003 R09: ffff88006e73f080 R10: 0000000000000001 R11: 00000000002191c0 R12: ffff88006fb83c10 R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006fb50740(0000) knlGS:0000000000000000 Unable to initialize Synaptics hardware. CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffff88086e7528b8 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88006fb82000, task ffff88006fb816d0) Stack: ffff88006e74da50 0000000000000000 ffff88006e54af00 ffffffff804863c7 ffff88006e74da50 0000000000000000 00000000ffffffff 0000000000000000 ffff88006fb83c10 ffffffff8024b46c ffffffff808f0560 ffff88006fb83c10 Call Trace: [] ? cpufreq_stat_notifier_trans+0x51/0x83 [] ? notifier_call_chain+0x29/0x4c [] ? __srcu_notifier_call_chain+0x46/0x61 [] ? cpufreq_notify_transition+0x93/0xa9 [] ? powernowk8_target+0x1e8/0x5f3 [] ? cpufreq_governor_performance+0x1b/0x20 [] ? __cpufreq_governor+0x71/0xa8 [] ? __cpufreq_set_policy+0x101/0x13e [] ? cpufreq_add_dev+0x3f0/0x4cd [] ? handle_update+0x0/0x8 [] ? sysdev_driver_register+0xb6/0x10d [] ? powernowk8_init+0x0/0x7e [] ? cpufreq_register_driver+0x8f/0x140 [] ? _stext+0x56/0x14f [] ? proc_register+0x122/0x17d [] ? create_proc_entry+0x73/0x8a [] ? register_irq_proc+0x92/0xaa [] ? init_irq_proc+0x57/0x69 [] ? kernel_init+0x116/0x169 [] ? child_rip+0xa/0x11 [] ? kernel_init+0x0/0x169 [] ? child_rip+0x0/0x11 Code: 05 c5 83 36 00 48 c7 c2 48 5d 86 80 48 8b 04 d8 48 8b 40 08 48 8b 34 02 48\ RIP [] cpufreq_stats_update+0x4a/0x5f RSP CR2: ffff88086e7528b8 ---[ end trace 0678bac75e67a2f7 ]--- Kernel panic - not syncing: Attempted to kill init! In short, aftereffect of the wrong P-state is that cpufreq_stats_update() uses "-1" as index for some array in cpufreq_stats_update (unsigned int cpu) { ... if (stat->time_in_state) stat->time_in_state[stat->last_index] = cputime64_add(stat->time_in_state[stat->last_index], cputime_sub(cur_time, stat->last_time)); ... } Fortunately, the wrong P-state value is returned only if the core is in P-state 0. This fix solves the problem by detecting the out-of-range P-state, ignoring it, and using "0" instead. Cc: Mark Langsdorf Signed-off-by: Andreas Herrmann Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 18 +++++++++++++++--- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 17 ++++++++++++++++- 2 files changed, 31 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index d3dcd58b87c..7f05f44b97e 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -115,9 +115,20 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 i = 0; if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; + if (data->currpstate == HW_PSTATE_INVALID) { + /* read (initial) hw pstate if not yet set */ + rdmsr(MSR_PSTATE_STATUS, lo, hi); + i = lo & HW_PSTATE_MASK; + + /* + * a workaround for family 11h erratum 311 might cause + * an "out-of-range Pstate if the core is in Pstate-0 + */ + if (i >= data->numps) + data->currpstate = HW_PSTATE_0; + else + data->currpstate = i; + } return 0; } do { @@ -1121,6 +1132,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) } data->cpu = pol->cpu; + data->currpstate = HW_PSTATE_INVALID; if (powernow_k8_cpu_init_acpi(data)) { /* diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index ab48cfed4d9..65cfb5d7f77 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -5,6 +5,19 @@ * http://www.gnu.org/licenses/gpl.html */ + +enum pstate { + HW_PSTATE_INVALID = 0xff, + HW_PSTATE_0 = 0, + HW_PSTATE_1 = 1, + HW_PSTATE_2 = 2, + HW_PSTATE_3 = 3, + HW_PSTATE_4 = 4, + HW_PSTATE_5 = 5, + HW_PSTATE_6 = 6, + HW_PSTATE_7 = 7, +}; + struct powernow_k8_data { unsigned int cpu; @@ -23,7 +36,9 @@ struct powernow_k8_data { u32 exttype; /* extended interface = 1 */ /* keep track of the current fid / vid or pstate */ - u32 currvid, currfid, currpstate; + u32 currvid; + u32 currfid; + enum pstate currpstate; /* the powernow_table includes all frequency and vid/fid pairings: * fid are the lower 8 bits of the index, vid are the upper 8 bits. -- cgit v1.2.3 From ffd565a8b817d1eb4b25184e8418e8d96c3f56f6 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 25 Nov 2008 17:18:03 +0100 Subject: x86: fixup config space size of CPU functions for AMD family 11h Impact: extend allowed configuration space access on 11h CPUs from 256 to 4K Signed-off-by: Andreas Herrmann Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar --- arch/x86/pci/fixup.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 3c27a809393..2051dc96b8e 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -496,21 +496,24 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, pci_siemens_interrupt_controller); /* - * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config - * have 4096 bytes. Even if the device is capable, that doesn't mean we can - * access it. Maybe we don't have a way to generate extended config space - * accesses. So check it + * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have + * 4096 bytes configuration space for each function of their processor + * configuration space. */ -static void fam10h_pci_cfg_space_size(struct pci_dev *dev) +static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev) { dev->cfg_size = pci_cfg_space_size_ext(dev); } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size); /* * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from -- cgit v1.2.3 From 72e9622c2a2eb73d82c716504cc93d22cd3cfd8e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 25 Nov 2008 18:57:08 +0100 Subject: [ARM] pxa/pcm990: use negative number for an invalid GPIO in camera data 0 is a valid GPIO number, use a negative number to specify, that this camera doesn't have a GPIO for bus-width switching. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pcm990-baseboard.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index f601425f1b1..b36cec5c9ee 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = { .gpio = NR_BUILTIN_GPIO + 1, }, { .bus_id = 0, /* Must match with the camera ID above */ + .gpio = -ENXIO, } }; -- cgit v1.2.3 From 2fd36a5d6e830269a37f0f6ccfd34ee0517ebc7d Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 26 Nov 2008 12:51:42 +0800 Subject: [ARM] pxa/corgi: update default config to exclude tosa from being built Signed-off-by: Eric Miao --- arch/arm/configs/corgi_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index f3af0b593eb..98765438048 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y # CONFIG_MACH_AKITA is not set # CONFIG_MACH_SPITZ is not set # CONFIG_MACH_BORZOI is not set -CONFIG_MACH_TOSA=y +# CONFIG_MACH_TOSA is not set # CONFIG_ARCH_VIPER is not set # CONFIG_ARCH_PXA_ESERIES is not set # CONFIG_TRIZEPS_PXA is not set -- cgit v1.2.3 From 9860d1b08b082ffb54c4b7827c48c2728e12ba21 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Nov 2008 12:04:13 +0100 Subject: parisc: __kernel_time_t is always long __kernel_time_t is always long on PA-RISC, irrespective of CONFIG_64BIT, hence move it out of the #ifdef CONFIG_64BIT / #else / #endif block. Signed-off-by: Geert Uytterhoeven Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/posix_types.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h index bb725a6630b..00da29a340b 100644 --- a/arch/parisc/include/asm/posix_types.h +++ b/arch/parisc/include/asm/posix_types.h @@ -24,13 +24,12 @@ typedef int __kernel_daddr_t; typedef unsigned long __kernel_size_t; typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; #else typedef unsigned int __kernel_size_t; typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; #endif +typedef long __kernel_time_t; typedef char * __kernel_caddr_t; typedef unsigned short __kernel_uid16_t; -- cgit v1.2.3 From 7a3f5134a8f5bd7fa38b5645eef05e8a4eb62951 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 26 Nov 2008 12:46:22 -0800 Subject: parisc: fix kernel crash when unwinding a userspace process Any user on existing parisc 32- and 64bit-kernels can easily crash the kernel and as such enforce a DSO. A simple testcase is available here: http://gsyprf10.external.hp.com/~deller/crash.tgz The problem is introduced by the fact, that the handle_interruption() crash handler calls the show_regs() function, which in turn tries to unwind the stack by calling parisc_show_stack(). Since the stack contains userspace addresses, a try to unwind the stack is dangerous and useless and leads to the crash. The fix is trivial: For userspace processes a) avoid to unwind the stack, and b) avoid to resolve userspace addresses to kernel symbol names. While touching this code, I converted print_symbol() to %pS printk formats and made parisc_show_stack() static. An initial patch for this was written by Kyle McMartin back in August: http://marc.info/?l=linux-parisc&m=121805168830283&w=2 Compile and run-tested with a 64bit parisc kernel. Signed-off-by: Helge Deller Cc: Grant Grundler Cc: Matthew Wilcox Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, earlier...] Signed-off-by: Andrew Morton Signed-off-by: Kyle McMartin --- arch/parisc/kernel/traps.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index 675f1d098f0..4c771cd580e 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -51,7 +50,7 @@ DEFINE_SPINLOCK(pa_dbit_lock); #endif -void parisc_show_stack(struct task_struct *t, unsigned long *sp, +static void parisc_show_stack(struct task_struct *task, unsigned long *sp, struct pt_regs *regs); static int printbinary(char *buf, unsigned long x, int nbits) @@ -121,18 +120,19 @@ static void print_fr(char *level, struct pt_regs *regs) void show_regs(struct pt_regs *regs) { - int i; + int i, user; char *level; unsigned long cr30, cr31; - level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; + user = user_mode(regs); + level = user ? KERN_DEBUG : KERN_CRIT; print_gr(level, regs); for (i = 0; i < 8; i += 4) PRINTREGS(level, regs->sr, "sr", RFMT, i); - if (user_mode(regs)) + if (user) print_fr(level, regs); cr30 = mfctl(30); @@ -145,14 +145,18 @@ void show_regs(struct pt_regs *regs) printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n", level, current_thread_info()->cpu, cr30, cr31); printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28); - printk(level); - print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]); - printk(level); - print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]); - printk(level); - print_symbol(" RP(r2): %s\n", regs->gr[2]); - - parisc_show_stack(current, NULL, regs); + + if (user) { + printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]); + printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]); + printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]); + } else { + printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]); + printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]); + printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]); + + parisc_show_stack(current, NULL, regs); + } } @@ -173,20 +177,15 @@ static void do_show_stack(struct unwind_frame_info *info) break; if (__kernel_text_address(info->ip)) { - printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip); -#ifdef CONFIG_KALLSYMS - print_symbol("%s\n", info->ip); -#else - if ((i & 0x03) == 0) - printk("\n"); -#endif + printk(KERN_CRIT " [<" RFMT ">] %pS\n", + info->ip, (void *) info->ip); i++; } } - printk("\n"); + printk(KERN_CRIT "\n"); } -void parisc_show_stack(struct task_struct *task, unsigned long *sp, +static void parisc_show_stack(struct task_struct *task, unsigned long *sp, struct pt_regs *regs) { struct unwind_frame_info info; -- cgit v1.2.3 From 90f671301a5e2678cdc99f611cd842161c3bb87f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 7 Nov 2008 01:42:46 +0100 Subject: parisc: struct device - replace bus_id with dev_name(), dev_set_name() (I did not compile or test it, please let me know, or help fixing it, if something is wrong with the conversion) This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay Cc: Matthew Wilcox Cc: linux-parisc@vger.kernel.org Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: Kyle McMartin --- arch/parisc/include/asm/parisc-device.h | 4 ++-- arch/parisc/kernel/drivers.c | 6 ++++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/parisc-device.h b/arch/parisc/include/asm/parisc-device.h index 7aa13f2add7..9afdad6c2ff 100644 --- a/arch/parisc/include/asm/parisc-device.h +++ b/arch/parisc/include/asm/parisc-device.h @@ -42,9 +42,9 @@ struct parisc_driver { #define to_parisc_driver(d) container_of(d, struct parisc_driver, drv) #define parisc_parent(d) to_parisc_device(d->dev.parent) -static inline char *parisc_pathname(struct parisc_device *d) +static inline const char *parisc_pathname(struct parisc_device *d) { - return d->dev.bus_id; + return dev_name(&d->dev); } static inline void diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 2ca654bd632..884b7ce16a3 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -43,7 +43,7 @@ struct hppa_dma_ops *hppa_dma_ops __read_mostly; EXPORT_SYMBOL(hppa_dma_ops); static struct device root = { - .bus_id = "parisc", + .init_name = "parisc", }; static inline int check_dev(struct device *dev) @@ -393,7 +393,8 @@ EXPORT_SYMBOL(print_pci_hwpath); static void setup_bus_id(struct parisc_device *padev) { struct hardware_path path; - char *output = padev->dev.bus_id; + char name[20]; + char *output = name; int i; get_node_path(padev->dev.parent, &path); @@ -404,6 +405,7 @@ static void setup_bus_id(struct parisc_device *padev) output += sprintf(output, "%u:", (unsigned char) path.bc[i]); } sprintf(output, "%u", (unsigned char) padev->hw_path); + dev_set_name(&padev->dev, name); } struct parisc_device * create_tree_node(char id, struct device *parent) -- cgit v1.2.3 From 59da21398e680e8100625d689c8bebee6a139e93 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 27 Nov 2008 11:05:55 +0100 Subject: [S390] fix system call parameter functions. syscall_get_nr() currently returns a valid result only if the call chain of the traced process includes do_syscall_trace_enter(). But collect_syscall() can be called for any sleeping task, the result of syscall_get_nr() in general is completely bogus. To make syscall_get_nr() work for any sleeping task the traps field in pt_regs is replace with svcnr - the system call number the process is executing. If svcnr == 0 the process is not on a system call path. The syscall_get_arguments and syscall_set_arguments use regs->gprs[2] for the first system call parameter. This is incorrect since gprs[2] may have been overwritten with the system call number if the call chain includes do_syscall_trace_enter. Use regs->orig_gprs2 instead. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/ptrace.h | 2 +- arch/s390/include/asm/syscall.h | 28 ++++++++++++++++------------ arch/s390/kernel/asm-offsets.c | 2 +- arch/s390/kernel/compat_signal.c | 2 +- arch/s390/kernel/entry.S | 21 +++++++++++---------- arch/s390/kernel/entry64.S | 23 ++++++++++------------- arch/s390/kernel/ptrace.c | 2 +- arch/s390/kernel/signal.c | 6 +++--- 8 files changed, 44 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index a7226f8143f..fb0ca4796d3 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -321,8 +321,8 @@ struct pt_regs psw_t psw; unsigned long gprs[NUM_GPRS]; unsigned long orig_gpr2; + unsigned short svcnr; unsigned short ilc; - unsigned short trap; }; #endif diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index 6e623971fbb..2429b87eb28 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -17,9 +17,7 @@ static inline long syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { - if (regs->trap != __LC_SVC_OLD_PSW) - return -1; - return regs->gprs[2]; + return regs->svcnr ? regs->svcnr : -1; } static inline void syscall_rollback(struct task_struct *task, @@ -52,18 +50,20 @@ static inline void syscall_get_arguments(struct task_struct *task, unsigned int i, unsigned int n, unsigned long *args) { + unsigned long mask = -1UL; + BUG_ON(i + n > 6); #ifdef CONFIG_COMPAT - if (test_tsk_thread_flag(task, TIF_31BIT)) { - if (i + n == 6) - args[--n] = (u32) regs->args[0]; - while (n-- > 0) - args[n] = (u32) regs->gprs[2 + i + n]; - } + if (test_tsk_thread_flag(task, TIF_31BIT)) + mask = 0xffffffff; #endif if (i + n == 6) - args[--n] = regs->args[0]; - memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0])); + args[--n] = regs->args[0] & mask; + while (n-- > 0) + if (i + n > 0) + args[n] = regs->gprs[2 + i + n] & mask; + if (i == 0) + args[0] = regs->orig_gpr2 & mask; } static inline void syscall_set_arguments(struct task_struct *task, @@ -74,7 +74,11 @@ static inline void syscall_set_arguments(struct task_struct *task, BUG_ON(i + n > 6); if (i + n == 6) regs->args[0] = args[--n]; - memcpy(®s->gprs[2 + i], args, n * sizeof(args[0])); + while (n-- > 0) + if (i + n > 0) + regs->gprs[2 + i + n] = args[n]; + if (i == 0) + regs->orig_gpr2 = args[0]; } #endif /* _ASM_SYSCALL_H */ diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index fa28ecae636..3d144e6020c 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -32,7 +32,7 @@ int main(void) DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs)); DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2)); DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc)); - DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap)); + DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr)); DEFINE(__PT_SIZE, sizeof(struct pt_regs)); BLANK(); DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain)); diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index c7f02e777af..b537cb0e9b5 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -340,7 +340,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) return err; restore_fp_regs(¤t->thread.fp_regs); - regs->trap = -1; /* disable syscall checks */ + regs->svcnr = 0; /* disable syscall checks */ return 0; } diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 08844fc24a2..198ea18a534 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -46,7 +46,7 @@ SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56 SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60 SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ @@ -183,11 +183,10 @@ STACK_SIZE = 1 << STACK_SHIFT .macro CREATE_STACK_FRAME psworg,savearea s %r15,BASED(.Lc_spsize) # make room for registers & psw mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack - la %r12,\psworg st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 - icm %r12,12,__LC_SVC_ILC + icm %r12,3,__LC_SVC_ILC stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack - st %r12,SP_ILC(%r15) + st %r12,SP_SVCNR(%r15) mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack la %r12,0 st %r12,__SF_BACKCHAIN(%r15) # clear back chain @@ -264,16 +263,17 @@ sysc_update: #endif sysc_do_svc: l %r9,__LC_THREAD_INFO # load pointer to thread_info struct - sla %r7,2 # *4 and test for svc 0 + ltr %r7,%r7 # test for svc 0 bnz BASED(sysc_nr_ok) # svc number > 0 # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) bnl BASED(sysc_nr_ok) lr %r7,%r1 # copy svc number to %r7 - sla %r7,2 # *4 sysc_nr_ok: mvc SP_ARGS(4,%r15),SP_R7(%r15) sysc_do_restart: + sth %r7,SP_SVCNR(%r15) + sll %r7,2 # svc number *4 l %r8,BASED(.Lsysc_table) tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) l %r8,0(%r7,%r8) # get system call addr. @@ -376,7 +376,6 @@ sysc_notify_resume: sysc_restart: ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC l %r7,SP_R2(%r15) # load new svc number - sla %r7,2 mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument lm %r2,%r6,SP_R2(%r15) # load svc arguments b BASED(sysc_do_restart) # restart svc @@ -386,7 +385,8 @@ sysc_restart: # sysc_singlestep: ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check + mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check + mvi SP_SVCNR+1(%r15),0xff la %r2,SP_PTREGS(%r15) # address of register-save area l %r1,BASED(.Lhandle_per) # load adr. of per handler la %r14,BASED(sysc_return) # load adr. of system return @@ -407,7 +407,7 @@ sysc_tracesys: bnl BASED(sysc_tracenogo) l %r8,BASED(.Lsysc_table) lr %r7,%r2 - sll %r7,2 # *4 + sll %r7,2 # svc number *4 l %r8,0(%r7,%r8) sysc_tracego: lm %r3,%r6,SP_R3(%r15) @@ -586,7 +586,8 @@ pgm_svcper: # per was called from kernel, must be kprobes # kernel_per: - mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check + mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check + mvi SP_SVCNR+1(%r15),0xff la %r2,SP_PTREGS(%r15) # address of register-save area l %r1,BASED(.Lhandle_per) # load adr. of per handler la %r14,BASED(sysc_restore)# load adr. of system return diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 41aca06682a..89c121ae633 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -46,7 +46,7 @@ SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112 SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120 SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2 SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC -SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP +SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER @@ -171,11 +171,10 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ .macro CREATE_STACK_FRAME psworg,savearea aghi %r15,-SP_SIZE # make room for registers & psw mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack - la %r12,\psworg stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2 - icm %r12,12,__LC_SVC_ILC + icm %r12,3,__LC_SVC_ILC stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack - st %r12,SP_ILC(%r15) + st %r12,SP_SVCNR(%r15) mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack la %r12,0 stg %r12,__SF_BACKCHAIN(%r15) @@ -250,16 +249,17 @@ sysc_update: #endif sysc_do_svc: lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - slag %r7,%r7,2 # *4 and test for svc 0 + ltgr %r7,%r7 # test for svc 0 jnz sysc_nr_ok # svc 0: system call number in %r1 cl %r1,BASED(.Lnr_syscalls) jnl sysc_nr_ok lgfr %r7,%r1 # clear high word in r1 - slag %r7,%r7,2 # svc 0: system call number in %r1 sysc_nr_ok: mvc SP_ARGS(8,%r15),SP_R7(%r15) sysc_do_restart: + sth %r7,SP_SVCNR(%r15) + sllg %r7,%r7,2 # svc number * 4 larl %r10,sys_call_table #ifdef CONFIG_COMPAT tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ? @@ -363,7 +363,6 @@ sysc_notify_resume: sysc_restart: ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC lg %r7,SP_R2(%r15) # load new svc number - slag %r7,%r7,2 # *4 mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument lmg %r2,%r6,SP_R2(%r15) # load svc arguments j sysc_do_restart # restart svc @@ -372,9 +371,8 @@ sysc_restart: # _TIF_SINGLE_STEP is set, call do_single_step # sysc_singlestep: - ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP - lhi %r0,__LC_PGM_OLD_PSW - sth %r0,SP_TRAP(%r15) # set trap indication to pgm check + ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP + xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number la %r2,SP_PTREGS(%r15) # address of register-save area larl %r14,sysc_return # load adr. of system return jg do_single_step # branch to do_sigtrap @@ -392,7 +390,7 @@ sysc_tracesys: lghi %r0,NR_syscalls clgr %r0,%r2 jnh sysc_tracenogo - slag %r7,%r2,2 # *4 + sllg %r7,%r2,2 # svc number *4 lgf %r8,0(%r7,%r10) sysc_tracego: lmg %r3,%r6,SP_R3(%r15) @@ -567,8 +565,7 @@ pgm_svcper: # per was called from kernel, must be kprobes # kernel_per: - lhi %r0,__LC_PGM_OLD_PSW - sth %r0,SP_TRAP(%r15) # set trap indication to pgm check + xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number la %r2,SP_PTREGS(%r15) # address of register-save area larl %r14,sysc_restore # load adr. of system ret, no work jg do_single_step # branch to do_single_step diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 1f31be1ecc4..38ff2bce120 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -657,7 +657,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) * debugger stored an invalid system call number. Skip * the system call and the system call restart handling. */ - regs->trap = -1; + regs->svcnr = 0; ret = -1; } diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 4f7fc3059a8..8e6812a2267 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -160,7 +160,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) current->thread.fp_regs.fpc &= FPC_VALID_MASK; restore_fp_regs(¤t->thread.fp_regs); - regs->trap = -1; /* disable syscall checks */ + regs->svcnr = 0; /* disable syscall checks */ return 0; } @@ -445,7 +445,7 @@ void do_signal(struct pt_regs *regs) oldset = ¤t->blocked; /* Are we from a system call? */ - if (regs->trap == __LC_SVC_OLD_PSW) { + if (regs->svcnr) { continue_addr = regs->psw.addr; restart_addr = continue_addr - regs->ilc; retval = regs->gprs[2]; @@ -462,7 +462,7 @@ void do_signal(struct pt_regs *regs) case -ERESTART_RESTARTBLOCK: regs->gprs[2] = -EINTR; } - regs->trap = -1; /* Don't deal with this again. */ + regs->svcnr = 0; /* Don't deal with this again. */ } /* Get signal to deliver. When running under ptrace, at this point -- cgit v1.2.3 From 8107d8296baff899db89c1716fe8af69a5b19d18 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 27 Nov 2008 11:05:56 +0100 Subject: [S390] fix/cleanup sched_clock CONFIG_PRINTK_TIME reveals that sched_clock has a wrong offset during boot: .. [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775679 [ 0.000000] Kernel command line: dasd=4b6c root=/dev/dasda1 ro noinitrd [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [6920575.975232] console [ttyS0] enabled [6920575.987586] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [6920575.991404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) .. The s390 implementation of sched_clock uses the store clock instruction and subtracts jiffies_timer_cc. jiffies_timer_cc is a local variable in arch/s390/kernel/time.c and only used for sched_clock and monotonic clock. For historical reasons there is an offset on that value. With todays code this offset is unnecessary. By removing that offset we can get a sched_clock which returns the nanoseconds after time_init. This improves CONFIG_PRINTK_TIME. Since sched_clock is the only user, I have also renamed jiffies_timer_cc to sched_clock_base_cc. In addition, the local variable init_timer_cc is redundant and can be romved as well. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index b94e9e3b694..eccefbbff88 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -59,7 +59,7 @@ static ext_int_info_t ext_int_info_cc; static ext_int_info_t ext_int_etr_cc; -static u64 jiffies_timer_cc; +static u64 sched_clock_base_cc; static DEFINE_PER_CPU(struct clock_event_device, comparators); @@ -68,7 +68,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators); */ unsigned long long sched_clock(void) { - return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9; + return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9; } /* @@ -229,13 +229,10 @@ static struct clocksource clocksource_tod = { */ void __init time_init(void) { - u64 init_timer_cc; - - init_timer_cc = reset_tod_clock(); - jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY; + sched_clock_base_cc = reset_tod_clock(); /* set xtime */ - tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime); + tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime); set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); @@ -289,7 +286,7 @@ static unsigned long long adjust_time(unsigned long long old, delta = -delta; adjust.offset = -ticks * (1000000 / HZ); } - jiffies_timer_cc += delta; + sched_clock_base_cc += delta; if (adjust.offset != 0) { printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n", adjust.offset); -- cgit v1.2.3 From 2944a5c971c12766e2438ea407ec3567949c32b7 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 27 Nov 2008 11:05:57 +0100 Subject: [S390] pgtable.h: Fix oops in unmap_vmas for KVM processes When running several kvm processes with lots of memory overcommitment, we have seen an oops during process shutdown: ------------[ cut here ]------------ Kernel BUG at 0000000000193434 [verbose debug info unavailable] addressing exception: 0005 [#1] PREEMPT SMP Modules linked in: kvm sunrpc qeth_l2 dm_mod qeth ccwgroup CPU: 10 Not tainted 2.6.28-rc4-kvm-bigiron-00521-g0ccca08-dirty #8 Process kuli (pid: 14460, task: 0000000149822338, ksp: 0000000024f57650) Krnl PSW : 0704e00180000000 0000000000193434 (unmap_vmas+0x884/0xf10) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000002 0000000000000000 000000051008d000 000003e05e6034e0 00000000001933f6 00000000000001e9 0000000407259e0a 00000002be88c400 00000200001c1000 0000000407259608 0000000407259e08 0000000024f577f0 0000000407259e09 0000000000445fa8 00000000001933f6 0000000024f577f0 Krnl Code: 0000000000193426: eb22000c000d sllg %r2,%r2,12 000000000019342c: a7180000 lhi %r1,0 0000000000193430: b2290012 iske %r1,%r2 >0000000000193434: a7110002 tmll %r1,2 0000000000193438: a7840006 brc 8,193444 000000000019343c: 9602c000 oi 0(%r12),2 0000000000193440: 96806000 oi 0(%r6),128 0000000000193444: a7110004 tmll %r1,4 Call Trace: ([<00000000001933f6>] unmap_vmas+0x846/0xf10) [<0000000000199680>] exit_mmap+0x210/0x458 [<000000000012a8f8>] mmput+0x54/0xfc [<000000000012f714>] exit_mm+0x134/0x144 [<000000000013120c>] do_exit+0x240/0x878 [<00000000001318dc>] do_group_exit+0x98/0xc8 [<000000000013e6b0>] get_signal_to_deliver+0x30c/0x358 [<000000000010bee0>] do_signal+0xec/0x860 [<0000000000112e30>] sysc_sigpending+0xe/0x22 [<000002000013198a>] 0x2000013198a INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000001a68d0>] free_swap_and_cache+0x1a0/0x1a4 <4>---[ end trace bc19f1d51ac9db7c ]--- The faulting instruction is the storage key operation (iske) in ptep_rcp_copy (called by pte_clear, called by unmap_vmas). iske reads dirty and reference bit information for a physical page and requires a valid physical address. Since we are in pte_clear, we cannot rely on the pte containing a valid address. Fortunately we dont need these information in pte_clear - after all there is no mapping. The best fix is to remove the needless call to ptep_rcp_copy that contains the iske. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 7fc76133b3e..5caddd4f7be 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -679,8 +679,6 @@ static inline void pmd_clear(pmd_t *pmd) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - if (mm->context.has_pgste) - ptep_rcp_copy(ptep); pte_val(*ptep) = _PAGE_TYPE_EMPTY; if (mm->context.noexec) pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY; -- cgit v1.2.3 From 0778dc3a624b48cf80072b04405cacd1ad4079be Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 27 Nov 2008 11:05:58 +0100 Subject: [S390] Fix alignment of initial kernel stack. We need an alignment of 16384 bytes for the initial kernel stack if the kernel is configured for 16384 bytes stacks but the linker script currently guarantees only an alignment of 8192 bytes. So fix this and simply use THREAD_SIZE as alignment value which will always do the right thing. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/init_task.c | 2 +- arch/s390/kernel/vmlinux.lds.S | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c index 7ad00396925..e8071684361 100644 --- a/arch/s390/kernel/init_task.c +++ b/arch/s390/kernel/init_task.c @@ -26,7 +26,7 @@ EXPORT_SYMBOL(init_mm); /* * Initial thread structure. * - * We need to make sure that this is 8192-byte aligned due to the + * We need to make sure that this is THREAD_SIZE aligned due to the * way process stacks are handled. This is done by having a special * "init_task" linker map entry.. */ diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 607bd67a18c..d796d05c9c0 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -2,6 +2,7 @@ * Written by Martin Schwidefsky (schwidefsky@de.ibm.com) */ +#include #include #include @@ -86,7 +87,7 @@ SECTIONS } _edata = .; /* End of data section */ - . = ALIGN(2 * PAGE_SIZE); /* init_task */ + . = ALIGN(THREAD_SIZE); /* init_task */ .data.init_task : { *(.data.init_task) } -- cgit v1.2.3 From abd942194dcba2fa9d24d547b8acd4ef052eaf73 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 27 Nov 2008 11:05:59 +0100 Subject: [S390] Update default configuration. Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 74 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 51 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 9b0bc2c9fba..a0e748da990 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 19:43:29 2008 +# Linux kernel version: 2.6.28-rc6 +# Thu Nov 27 11:00:49 2008 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -45,6 +45,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set CONFIG_GROUP_SCHED=y @@ -84,6 +85,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -92,16 +94,10 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -135,6 +131,7 @@ CONFIG_DEFAULT_DEADLINE=y CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Base setup @@ -189,7 +186,6 @@ CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -200,9 +196,11 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # # I/O subsystem configuration @@ -220,6 +218,8 @@ CONFIG_IPL=y CONFIG_IPL_VM=y CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PROCESS_DEBUG is not set @@ -255,7 +255,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set -CONFIG_IUCV=m +CONFIG_IUCV=y CONFIG_AFIUCV=m CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -282,7 +282,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -331,10 +330,12 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CONNTRACK_TFTP is not set # CONFIG_NF_CT_NETLINK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_NF_CONNTRACK_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set @@ -374,6 +375,7 @@ CONFIG_NET_SCH_CBQ=m # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=y CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -406,6 +408,7 @@ CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_NAT=m # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y @@ -424,6 +427,7 @@ CONFIG_CAN_BCM=m CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_PCMCIA is not set @@ -473,7 +477,7 @@ CONFIG_VIRTIO_BLK=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set # # SCSI device support @@ -525,6 +529,7 @@ CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m @@ -555,6 +560,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -632,13 +640,12 @@ CONFIG_S390_VMUR=m # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# +# CONFIG_REGULATOR is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -650,13 +657,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -688,6 +696,7 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -728,6 +737,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -800,12 +810,24 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set @@ -816,16 +838,19 @@ CONFIG_SAMPLES=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set @@ -877,7 +902,7 @@ CONFIG_CRYPTO_SHA1=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -898,6 +923,11 @@ CONFIG_CRYPTO_SEED=m # # CONFIG_CRYPTO_DEFLATE is not set CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y CONFIG_ZCRYPT=m # CONFIG_ZCRYPT_MONOLITHIC is not set @@ -912,8 +942,6 @@ CONFIG_S390_PRNG=m # Library routines # CONFIG_BITREVERSE=m -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y -- cgit v1.2.3 From b627c8b17ccacba38c975bc0f69a49fc4e5261c9 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 20 Nov 2008 20:49:56 +0100 Subject: x86: always define DECLARE_PCI_UNMAP* macros Impact: fix boot crash on AMD IOMMU if CONFIG_GART_IOMMU is off Currently these macros evaluate to a no-op except the kernel is compiled with GART or Calgary support. But we also need these macros when we have SWIOTLB, VT-d or AMD IOMMU in the kernel. Since we always compile at least with SWIOTLB we can define these macros always. This patch is also for stable backport for the same reason the SWIOTLB default selection patch is. Signed-off-by: Joerg Roedel Cc: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/pci_64.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h index 5b28995d664..d02d936840a 100644 --- a/arch/x86/include/asm/pci_64.h +++ b/arch/x86/include/asm/pci_64.h @@ -34,8 +34,6 @@ extern void pci_iommu_alloc(void); */ #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) -#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU) - #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ @@ -49,18 +47,6 @@ extern void pci_iommu_alloc(void); #define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ (((PTR)->LEN_NAME) = (VAL)) -#else -/* No IOMMU */ - -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif - #endif /* __KERNEL__ */ #endif /* _ASM_X86_PCI_64_H */ -- cgit v1.2.3 From a730b327ca70f0e4d933202e3979e96613c3585f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 20 Nov 2008 17:34:57 +0100 Subject: [ARM] pxa/palmtx: misc fixes to use generic GPIO API Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtx.c | 150 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 118 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 4447711c9fc..a9d94f5dbec 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO115_GPIO, /* SD r/o switch */ /* AC97 */ GPIO28_AC97_BITCLK, @@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO31_AC97_SYNC, /* IrDA */ + GPIO40_GPIO, /* ir disable */ GPIO46_FICP_RXD, GPIO47_FICP_TXD, @@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO16_PWM0_OUT, /* USB */ - GPIO13_GPIO, + GPIO13_GPIO, /* usb detect */ + GPIO95_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO55_nPREG, GPIO56_nPWAIT, GPIO57_nIOIS16, + GPIO94_GPIO, /* wifi power 1 */ + GPIO108_GPIO, /* wifi power 2 */ + GPIO116_GPIO, /* wifi ready */ + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* MISC. */ + GPIO10_GPIO, /* hotsync button */ + GPIO12_GPIO, /* power detect */ + GPIO107_GPIO, /* earphone detect */ }; /****************************************************************************** @@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int, int err = 0; /* Setup an interrupt for detecting card insert/remove events */ - err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), + palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "SD/MMC card detect", data); if (err) { printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", __func__); - return err; + goto err2; } err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER"); if (err) - goto pwr_err; + goto err3; + err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0); + if (err) + goto err4; err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY"); if (err) - goto ro_err; + goto err4; + err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY); + if (err) + goto err5; printk(KERN_DEBUG "%s: irq registered\n", __func__); return 0; -ro_err: +err5: + gpio_free(GPIO_NR_PALMTX_SD_READONLY); +err4: gpio_free(GPIO_NR_PALMTX_SD_POWER); -pwr_err: - free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMTX_SD_DETECT_N); +err: return err; } @@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data) { gpio_free(GPIO_NR_PALMTX_SD_READONLY); gpio_free(GPIO_NR_PALMTX_SD_POWER); - free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data); + free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMTX_SD_DETECT_N); } static void palmtx_mci_power(struct device *dev, unsigned int vdd) @@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = { KEY(3, 0, KEY_RIGHT), KEY(3, 2, KEY_LEFT), - }; static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = { @@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev) ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER"); if (ret) goto err; + ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0); + if (ret) + goto err2; ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER"); if (ret) goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0); + if (ret) + goto err3; return 0; +err3: + gpio_free(GPIO_NR_PALMTX_LCD_POWER); err2: gpio_free(GPIO_NR_PALMTX_BL_POWER); err: @@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = { /****************************************************************************** * IrDA ******************************************************************************/ +static int palmtx_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMTX_IR_DISABLE); +err: + return err; +} + +static void palmtx_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTX_IR_DISABLE); +} + static void palmtx_irda_transceiver_mode(struct device *dev, int mode) { gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF); @@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode) } static struct pxaficp_platform_data palmtx_ficp_platform_data = { + .startup = palmtx_irda_startup, + .shutdown = palmtx_irda_shutdown, .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, .transceiver_mode = palmtx_irda_transceiver_mode, }; @@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { /****************************************************************************** * UDC ******************************************************************************/ -static void palmtx_udc_command(int cmd) -{ - gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd); - udelay(50); - gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd); -} - static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .udc_command = palmtx_udc_command, + .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup_inverted = 0, }; /****************************************************************************** @@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev) ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC"); if (ret) - goto err_cs_ac; - - ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB"); + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT); if (ret) - goto err_cs_usb; + goto err2; return 0; -err_cs_usb: +err2: gpio_free(GPIO_NR_PALMTX_POWER_DETECT); -err_cs_ac: +err1: return ret; } @@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void) return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT); } -static int palmtx_is_usb_online(void) -{ - return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N); -} - static void power_supply_exit(struct device *dev) { - gpio_free(GPIO_NR_PALMTX_USB_DETECT_N); gpio_free(GPIO_NR_PALMTX_POWER_DETECT); } @@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = { static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = palmtx_is_ac_online, - .is_usb_online = palmtx_is_usb_online, .exit = power_supply_exit, .supplied_to = palmtx_supplicants, .num_supplicants = ARRAY_SIZE(palmtx_supplicants), @@ -410,12 +485,23 @@ static void __init palmtx_map_io(void) iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc)); } +/* setup udc GPIOs initial state */ +static void __init palmtx_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); + gpio_free(GPIO_NR_PALMTX_USB_POWER); + } +} + + static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); + palmtx_udc_init(); pxa_set_udc_info(&palmtx_udc_info); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); -- cgit v1.2.3 From 7d6a8a1c487422b772201927c454930377d8cf7e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:34 +0000 Subject: false __cpuinit positives on alpha pure noise - alpha doesn't have CPU hotplug Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/smp.c | 6 +++--- arch/alpha/kernel/traps.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index e657c45d91d..cf7da10097b 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid) /* * Where secondaries begin a life of C. */ -void __init +void __cpuinit smp_callin(void) { int cpuid = hard_smp_processor_id(); @@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask) * Send a message to a secondary's console. "START" is one such * interesting message. ;-) */ -static void __init +static void __cpuinit send_secondary_console_msg(char *str, int cpuid) { struct percpu_struct *cpu; @@ -289,7 +289,7 @@ recv_secondary_console_msg(void) /* * Convince the console to have a secondary cpu begin execution. */ -static int __init +static int __cpuinit secondary_cpu_start(int cpuid, struct task_struct *idle) { struct percpu_struct *cpu; diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index c778779007f..cefc5a355ef 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -31,7 +31,7 @@ static int opDEC_fix; -static void __init +static void __cpuinit opDEC_check(void) { __asm__ __volatile__ ( @@ -1072,7 +1072,7 @@ give_sigbus: return; } -void __init +void __cpuinit trap_init(void) { /* Tell PAL-code what global pointer we want in the kernel. */ -- cgit v1.2.3 From 4ea8fb9c1cc67bee980dca589ec8d0d4e62858c7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:44 +0000 Subject: powerpc set_huge_psize() false positive called only from __init, calls __init. Incidentally, it ought to be static in file. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/powerpc/include/asm/mmu-hash64.h | 1 - arch/powerpc/mm/hugetlbpage.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 5a441742ffb..68b75262680 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -280,7 +280,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long prot, int psize, int ssize); -extern void set_huge_psize(int psize); extern void add_gpage(unsigned long addr, unsigned long page_size, unsigned long number_of_pages); extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index a117024ab8c..7bbf4e4ed43 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -677,7 +677,7 @@ repeat: return err; } -void set_huge_psize(int psize) +static void __init set_huge_psize(int psize) { /* Check that it is a page size supported by the hardware and * that it fits within pagetable limits. */ -- cgit v1.2.3 From 409832f5484cd1e2d8812c3236dffb33d01c359b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:33:54 +0000 Subject: sparc32 cpuinit flase positives All noise since we don't have CPU hotplug there. However, they did expose something very odd-looking in there - poke_viking() does a bunch of identical btfixup each time it's called (i.e. for each CPU). That one is left alone for now; just the trivial misannotation fixes. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc/kernel/cpu.c | 2 +- arch/sparc/kernel/smp.c | 4 ++-- arch/sparc/kernel/sun4d_smp.c | 4 ++-- arch/sparc/kernel/sun4m_smp.c | 2 +- arch/sparc/kernel/trampoline.S | 4 ++-- arch/sparc/mm/srmmu.c | 14 +++++++------- 6 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index e7a0edfc1a3..1fc17f59c6b 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -126,7 +126,7 @@ char *sparc_fpu_type; unsigned int fsr_storage; -void __init cpu_probe(void) +void __cpuinit cpu_probe(void) { int psr_impl, psr_vers, fpu_vers; int i, psr; diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c index 1619ec15c09..e396c1f17a9 100644 --- a/arch/sparc/kernel/smp.c +++ b/arch/sparc/kernel/smp.c @@ -35,7 +35,7 @@ #include "irq.h" -volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,}; +volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,}; unsigned char boot_cpu_id = 0; unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */ @@ -120,7 +120,7 @@ void cpu_panic(void) panic("SMP bolixed\n"); } -struct linux_prom_registers smp_penguin_ctable __initdata = { 0 }; +struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 }; void smp_send_reschedule(int cpu) { diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 7a6a5e79592..16ab0cb731c 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -83,7 +83,7 @@ static inline void show_leds(int cpuid) "i" (ASI_M_CTL)); } -void __init smp4d_callin(void) +void __cpuinit smp4d_callin(void) { int cpuid = hard_smp4d_processor_id(); extern spinlock_t sun4d_imsk_lock; @@ -386,7 +386,7 @@ void smp4d_percpu_timer_interrupt(struct pt_regs *regs) extern unsigned int lvl14_resolution; -static void __init smp_setup_percpu_timer(void) +static void __cpuinit smp_setup_percpu_timer(void) { int cpu = hard_smp4d_processor_id(); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 5fc386d08c4..4f8d60586b0 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -343,7 +343,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs) extern unsigned int lvl14_resolution; -static void __init smp_setup_percpu_timer(void) +static void __cpuinit smp_setup_percpu_timer(void) { int cpu = smp_processor_id(); diff --git a/arch/sparc/kernel/trampoline.S b/arch/sparc/kernel/trampoline.S index 356c56aebc6..5e235c52d66 100644 --- a/arch/sparc/kernel/trampoline.S +++ b/arch/sparc/kernel/trampoline.S @@ -18,7 +18,7 @@ .globl sun4m_cpu_startup, __smp4m_processor_id .globl sun4d_cpu_startup, __smp4d_processor_id - __INIT + __CPUINIT .align 4 /* When we start up a cpu for the first time it enters this routine. @@ -109,7 +109,7 @@ __smp4d_processor_id: /* CPUID in bootbus can be found at PA 0xff0140000 */ #define SUN4D_BOOTBUS_CPUID 0xf0140000 - __INIT + __CPUINIT .align 4 sun4d_cpu_startup: diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 6a5d7cabc04..dd8aa36f366 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -1251,7 +1251,7 @@ static inline void map_kernel(void) /* Paging initialization on the Sparc Reference MMU. */ extern void sparc_context_init(int); -void (*poke_srmmu)(void) __initdata = NULL; +void (*poke_srmmu)(void) __cpuinitdata = NULL; extern unsigned long bootmem_init(unsigned long *pages_avail); @@ -1446,7 +1446,7 @@ static void __init init_vac_layout(void) (int)vac_cache_size, (int)vac_line_size); } -static void __init poke_hypersparc(void) +static void __cpuinit poke_hypersparc(void) { volatile unsigned long clear; unsigned long mreg = srmmu_get_mmureg(); @@ -1501,7 +1501,7 @@ static void __init init_hypersparc(void) hypersparc_setup_blockops(); } -static void __init poke_cypress(void) +static void __cpuinit poke_cypress(void) { unsigned long mreg = srmmu_get_mmureg(); unsigned long faddr, tagval; @@ -1589,7 +1589,7 @@ static void __init init_cypress_605(unsigned long mrev) init_cypress_common(); } -static void __init poke_swift(void) +static void __cpuinit poke_swift(void) { unsigned long mreg; @@ -1771,7 +1771,7 @@ static void turbosparc_flush_tlb_page(struct vm_area_struct *vma, unsigned long } -static void __init poke_turbosparc(void) +static void __cpuinit poke_turbosparc(void) { unsigned long mreg = srmmu_get_mmureg(); unsigned long ccreg; @@ -1834,7 +1834,7 @@ static void __init init_turbosparc(void) poke_srmmu = poke_turbosparc; } -static void __init poke_tsunami(void) +static void __cpuinit poke_tsunami(void) { unsigned long mreg = srmmu_get_mmureg(); @@ -1876,7 +1876,7 @@ static void __init init_tsunami(void) tsunami_setup_blockops(); } -static void __init poke_viking(void) +static void __cpuinit poke_viking(void) { unsigned long mreg = srmmu_get_mmureg(); static int smp_catch; -- cgit v1.2.3 From 8c29890aef80702824e2284909ee301ef2430a3e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:34:04 +0000 Subject: sparc64 trivial section misannotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/smp.c | 4 ++-- arch/sparc64/mm/init.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index e5627118e61..f500b0618bb 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -282,7 +282,7 @@ static unsigned long kimage_addr_to_ra(void *p) return kern_base + (val - KERNBASE); } -static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg) +static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg) { extern unsigned long sparc64_ttable_tl0; extern unsigned long kern_locked_tte_data; @@ -343,7 +343,7 @@ extern unsigned long sparc64_cpu_startup; */ static struct thread_info *cpu_new_thread = NULL; -static int __devinit smp_boot_one_cpu(unsigned int cpu) +static int __cpuinit smp_boot_one_cpu(unsigned int cpu) { struct trap_per_cpu *tb = &trap_block[cpu]; unsigned long entry = diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 3c10daf8fc0..185f3467911 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -956,7 +956,7 @@ int of_node_to_nid(struct device_node *dp) return nid; } -static void add_node_ranges(void) +static void __init add_node_ranges(void) { int i; -- cgit v1.2.3 From e669dae6141ff97d3c7566207f5de3b487dcf837 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:04 +0000 Subject: of_platform_driver noise on sparce switch to __init for those; unlike powerpc sparc has no hotplug support for that stuff and their ->probe() tends to call __init functions while being declared __devinit. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/pci_fire.c | 2 +- arch/sparc64/kernel/pci_psycho.c | 4 ++-- arch/sparc64/kernel/pci_sun4v.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c index 9462b68f489..fcbbac66e14 100644 --- a/arch/sparc64/kernel/pci_fire.c +++ b/arch/sparc64/kernel/pci_fire.c @@ -455,7 +455,7 @@ static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit fire_probe(struct of_device *op, +static int __init fire_probe(struct of_device *op, const struct of_device_id *match) { struct device_node *dp = op->node; diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index dfb3ec89298..56605adbb5b 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -493,7 +493,7 @@ static void __init psycho_pbm_init(struct pci_pbm_info *pbm, psycho_scan_bus(pbm, &op->dev); } -static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) +static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid) { struct pci_pbm_info *pbm; @@ -506,7 +506,7 @@ static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __devinit psycho_probe(struct of_device *op, +static int __init psycho_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *pr_regs; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 34a1fded394..4b27b0e10ce 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -929,7 +929,7 @@ static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit pci_sun4v_probe(struct of_device *op, +static int __init pci_sun4v_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *regs; -- cgit v1.2.3 From 1c4567aeed84a2746d78d4c1fe092222a559d43f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:35:54 +0000 Subject: m32r: section noise in head.S usual "introduce .text.head, put it in front of TEXT_TEXT in vmlinux.lds.S, make the stuff up to jump to start_kernel live in it", same as on other targets. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/m32r/kernel/head.S | 4 ++-- arch/m32r/kernel/vmlinux.lds.S | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index 40180778a5c..90916067b9c 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ - .text +.section .text.head, "ax" .global start_kernel .global __bss_start .global _end @@ -133,7 +133,6 @@ loop1: /* * AP startup routine */ - .text .global eit_vector ENTRY(startup_AP) ;; setup EVB @@ -230,6 +229,7 @@ ENTRY(startup_AP) nop #endif /* CONFIG_SMP */ + .text ENTRY(stack_start) .long init_thread_union+8192 .long __KERNEL_DS diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 15a6f36c06d..9db05df20c0 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -27,6 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { + *(.text.head) TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 5bac287ea51bb8678c3875d87a536071ef0fd590 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:36:04 +0000 Subject: fix the section noise in sparc head.S usual .text.head trick Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc/kernel/head.S | 2 +- arch/sparc/kernel/vmlinux.lds.S | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S index 2d325fd8457..51b40426f9c 100644 --- a/arch/sparc/kernel/head.S +++ b/arch/sparc/kernel/head.S @@ -72,7 +72,7 @@ sun4e_notsup: .align 4 /* The Sparc trap table, bootloader gives us control at _start. */ - .text + .section .text.head,"ax" .globl start, _stext, _start, __stext .globl trapbase _start: /* danger danger */ diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index b1002c60719..5b7e69a8c32 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -13,6 +13,7 @@ SECTIONS .text 0xf0004000 : { _text = .; + *(.text.head) TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 4bcc17dd8e48b612d43a9b0a6faa9eaa358fa4bd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:04 +0000 Subject: alpha: pcibios_resource_to_bus() is callable from normal code pci_enable_rom(), specifically. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 5cf45fc5134..ff8cb638472 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp) return PCI_SLOT(dev->devfn); } -void __devinit +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { -- cgit v1.2.3 From 2236d252e001ea57d53cec1954f680e503f3b8bc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:34 +0000 Subject: enable_IR_x2apic() needs to be __init calls __init, called only from __init Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index 04a7f960bbc..16f94879b52 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -1315,7 +1315,7 @@ void enable_x2apic(void) } } -void enable_IR_x2apic(void) +void __init enable_IR_x2apic(void) { #ifdef CONFIG_INTR_REMAP int ret; -- cgit v1.2.3 From 23a14b9e9db49ed5f7683857557c26c874d4abb6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:44 +0000 Subject: kvm_setup_secondary_clock() is cpuinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/kernel/kvmclock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 1c9cc431ea4..e169ae9b6a6 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -128,7 +128,7 @@ static int kvm_register_clock(char *txt) } #ifdef CONFIG_X86_LOCAL_APIC -static void __devinit kvm_setup_secondary_clock(void) +static void __cpuinit kvm_setup_secondary_clock(void) { /* * Now that the first cpu already had this clocksource initialized, -- cgit v1.2.3 From 37af46efa5413c6f4c25d9a24b4c43f2cc718eed Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:37:54 +0000 Subject: xen_setup_vcpu_info_placement() is not init on x86 ... so get xen-ops.h in agreement with xen/smp.c Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/xen/xen-ops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index d7422dc2a55..9e1afae8461 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -49,7 +49,7 @@ bool xen_vcpu_stolen(int vcpu); void xen_mark_init_mm_pinned(void); -void __init xen_setup_vcpu_info_placement(void); +void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP void xen_smp_init(void); -- cgit v1.2.3 From df6b07949b6cab9d119363d02ef63379160f6c82 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:04 +0000 Subject: xen_play_dead() is __cpuinit Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86/xen/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index d77da613b1d..acd9b6705e0 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -362,7 +362,7 @@ static void xen_cpu_die(unsigned int cpu) alternatives_smp_switch(0); } -static void xen_play_dead(void) +static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */ { play_dead_common(); HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL); -- cgit v1.2.3 From d3a307f32ec3554739033762672e533e2d246dae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 22 Nov 2008 17:38:24 +0000 Subject: sn_pci_controller_fixup() should be __init called only from __init Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ia64/sn/kernel/io_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index c3aa851d1ca..4e1801bad83 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -292,7 +292,7 @@ EXPORT_SYMBOL(sn_io_slot_fixup); * sn_pci_controller_fixup() - This routine sets up a bus's resources * consistent with the Linux PCI abstraction layer. */ -static void +static void __init sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) { s64 status = 0; -- cgit v1.2.3 From 96b8936a9ed08746e47081458a5eb9e43a751e24 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 25 Nov 2008 08:10:03 +0100 Subject: remove __ARCH_WANT_COMPAT_SYS_PTRACE All architectures now use the generic compat_sys_ptrace, as should every new architecture that needs 32bit compat (if we'll ever get another). Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also kill a comment about __ARCH_SYS_PTRACE that was added after __ARCH_SYS_PTRACE was already gone. Signed-off-by: Christoph Hellwig Acked-by: David S. Miller Signed-off-by: Linus Torvalds --- arch/Kconfig | 2 -- arch/ia64/include/asm/ptrace.h | 2 -- arch/mips/include/asm/ptrace.h | 4 ---- arch/parisc/include/asm/ptrace.h | 2 -- arch/powerpc/include/asm/ptrace.h | 2 -- arch/s390/include/asm/ptrace.h | 2 -- arch/sparc/include/asm/ptrace_64.h | 2 -- arch/x86/include/asm/ptrace.h | 2 -- 8 files changed, 18 deletions(-) (limited to 'arch') diff --git a/arch/Kconfig b/arch/Kconfig index 8977d99987c..471e72dbaf8 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -79,8 +79,6 @@ config HAVE_KRETPROBES # task_pt_regs() in asm/processor.h or asm/ptrace.h # arch_has_single_step() if there is hardware single-step support # arch_has_block_step() if there is hardware block-step support -# arch_ptrace() and not #define __ARCH_SYS_PTRACE -# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE # asm/syscall.h supplying asm-generic/syscall.h interface # linux/regset.h user_regset interfaces # CORE_DUMP_USE_REGSET #define'd in linux/elf.h diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h index 6417c1ecb44..14055c636ad 100644 --- a/arch/ia64/include/asm/ptrace.h +++ b/arch/ia64/include/asm/ptrace.h @@ -325,8 +325,6 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) #define arch_has_block_step() (1) extern void user_enable_block_step(struct task_struct *); -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #endif /* !__KERNEL__ */ /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 813abd16255..c2c8bac4330 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -9,10 +9,6 @@ #ifndef _ASM_PTRACE_H #define _ASM_PTRACE_H -#ifdef CONFIG_64BIT -#define __ARCH_WANT_COMPAT_SYS_PTRACE -#endif - /* 0 - 31 are integer registers, 32 - 63 are fp registers. */ #define FPR_BASE 32 #define PC 64 diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h index afa5333187b..302f68dc889 100644 --- a/arch/parisc/include/asm/ptrace.h +++ b/arch/parisc/include/asm/ptrace.h @@ -47,8 +47,6 @@ struct pt_regs { #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS)) -#define __ARCH_WANT_COMPAT_SYS_PTRACE - struct task_struct; #define arch_has_single_step() 1 void user_disable_single_step(struct task_struct *task); diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index 280a90cc989..c9c678fb253 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -55,8 +55,6 @@ struct pt_regs { #ifdef __powerpc64__ -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ #define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ #define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index a7226f8143f..560ce8561df 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -486,8 +486,6 @@ struct task_struct; extern void user_enable_single_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) #define user_stack_pointer(regs)((regs)->gprs[15]) diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index 3d3e9c161d8..84e969f06af 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -142,8 +142,6 @@ struct global_reg_snapshot { }; extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #define force_successful_syscall_return() \ do { current_thread_info()->syscall_noerror = 1; \ } while (0) diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index d1531c8480b..eefb0594b05 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -271,8 +271,6 @@ extern int do_get_thread_area(struct task_struct *p, int idx, extern int do_set_thread_area(struct task_struct *p, int idx, struct user_desc __user *info, int can_allocate); -#define __ARCH_WANT_COMPAT_SYS_PTRACE - #endif /* __KERNEL__ */ #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From 499c59c42967329d39481314a839d7669f5e1506 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Fri, 28 Nov 2008 11:48:37 +0000 Subject: MN10300: Tighten up the code using case ranges Compress a set of consecutive switch cases into a case-range. Signed-off-by: Robert P. J. Day Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/gdb-stub.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 54be6afb555..0ea7482c152 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -522,17 +522,7 @@ static int gdbstub_single_step(struct pt_regs *regs) } else { switch (cur) { /* Bxx (d8,PC) */ - case 0xc0: - case 0xc1: - case 0xc2: - case 0xc3: - case 0xc4: - case 0xc5: - case 0xc6: - case 0xc7: - case 0xc8: - case 0xc9: - case 0xca: + case 0xc0 ... 0xca: if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0) goto fault; if (!__gdbstub_mark_bp(pc + 2, 0)) @@ -543,17 +533,7 @@ static int gdbstub_single_step(struct pt_regs *regs) break; /* LXX (d8,PC) */ - case 0xd0: - case 0xd1: - case 0xd2: - case 0xd3: - case 0xd4: - case 0xd5: - case 0xd6: - case 0xd7: - case 0xd8: - case 0xd9: - case 0xda: + case 0xd0 ... 0xda: if (!__gdbstub_mark_bp(pc + 1, 0)) goto fault; if (regs->pc != regs->lar && -- cgit v1.2.3 From 4b824de9b18b8d1013e9fc9e4b0f855ced8cac2c Mon Sep 17 00:00:00 2001 From: Adhemerval Zanella Date: Wed, 19 Nov 2008 03:55:35 +0000 Subject: powerpc: Fix IRQ assignment for some PCIe devices Currently, some PCIe devices on POWER6 machines do not get interrupts assigned correctly. The problem is that OF doesn't create an "interrupt" property for them. The fix is for of_irq_map_pci to fall back to using the value in the PCI interrupt-pin register in config space, as we do when there is no OF device-tree node for the device. I have verified that this works fine with a pair of Squib-E SAS adapter on a P6-570. Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index bc1fb27368a..a11d68976dc 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -250,8 +250,11 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) * parsing */ dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } /* Ok, we don't, time to have fun. Let's start by building up an * interrupt spec. we assume #interrupt-cells is 1, which is standard -- cgit v1.2.3 From 4a6186696e7f15b3ea4dafcdb64ee0703e0e4487 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Mon, 24 Nov 2008 12:02:35 +0000 Subject: powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen Signed-off-by: Paul Mackerras --- arch/powerpc/mm/numa.c | 122 ++++++++++++++++++++++++++++++------------------- 1 file changed, 75 insertions(+), 47 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index eb505ad34a8..a8397bbad3d 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -865,6 +865,67 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = { .priority = 1 /* Must run before sched domains notifier. */ }; +static void mark_reserved_regions_for_nid(int nid) +{ + struct pglist_data *node = NODE_DATA(nid); + int i; + + for (i = 0; i < lmb.reserved.cnt; i++) { + unsigned long physbase = lmb.reserved.region[i].base; + unsigned long size = lmb.reserved.region[i].size; + unsigned long start_pfn = physbase >> PAGE_SHIFT; + unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT); + struct node_active_region node_ar; + unsigned long node_end_pfn = node->node_start_pfn + + node->node_spanned_pages; + + /* + * Check to make sure that this lmb.reserved area is + * within the bounds of the node that we care about. + * Checking the nid of the start and end points is not + * sufficient because the reserved area could span the + * entire node. + */ + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; + + get_node_active_region(start_pfn, &node_ar); + while (start_pfn < end_pfn && + node_ar.start_pfn < node_ar.end_pfn) { + unsigned long reserve_size = size; + /* + * if reserved region extends past active region + * then trim size to active region + */ + if (end_pfn > node_ar.end_pfn) + reserve_size = (node_ar.end_pfn << PAGE_SHIFT) + - (start_pfn << PAGE_SHIFT); + dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, + reserve_size, node_ar.nid); + reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase, + reserve_size, BOOTMEM_DEFAULT); + /* + * if reserved region is contained in the active region + * then done. + */ + if (end_pfn <= node_ar.end_pfn) + break; + + /* + * reserved region extends past the active region + * get next active region that contains this + * reserved region + */ + start_pfn = node_ar.end_pfn; + physbase = start_pfn << PAGE_SHIFT; + size = size - reserve_size; + get_node_active_region(start_pfn, &node_ar); + } + } +} + + void __init do_init_bootmem(void) { int nid; @@ -890,7 +951,13 @@ void __init do_init_bootmem(void) get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); - /* Allocate the node structure node local if possible */ + /* + * Allocate the node structure node local if possible + * + * Be careful moving this around, as it relies on all + * previous nodes' bootmem to be initialized and have + * all reserved areas marked. + */ NODE_DATA(nid) = careful_allocation(nid, sizeof(struct pglist_data), SMP_CACHE_BYTES, end_pfn); @@ -922,53 +989,14 @@ void __init do_init_bootmem(void) start_pfn, end_pfn); free_bootmem_with_active_regions(nid, end_pfn); - } - - /* Mark reserved regions */ - for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long physbase = lmb.reserved.region[i].base; - unsigned long size = lmb.reserved.region[i].size; - unsigned long start_pfn = physbase >> PAGE_SHIFT; - unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT); - struct node_active_region node_ar; - - get_node_active_region(start_pfn, &node_ar); - while (start_pfn < end_pfn && - node_ar.start_pfn < node_ar.end_pfn) { - unsigned long reserve_size = size; - /* - * if reserved region extends past active region - * then trim size to active region - */ - if (end_pfn > node_ar.end_pfn) - reserve_size = (node_ar.end_pfn << PAGE_SHIFT) - - (start_pfn << PAGE_SHIFT); - dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, - reserve_size, node_ar.nid); - reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase, - reserve_size, BOOTMEM_DEFAULT); - /* - * if reserved region is contained in the active region - * then done. - */ - if (end_pfn <= node_ar.end_pfn) - break; - - /* - * reserved region extends past the active region - * get next active region that contains this - * reserved region - */ - start_pfn = node_ar.end_pfn; - physbase = start_pfn << PAGE_SHIFT; - size = size - reserve_size; - get_node_active_region(start_pfn, &node_ar); - } - - } - - for_each_online_node(nid) + /* + * Be very careful about moving this around. Future + * calls to careful_allocation() depend on this getting + * done correctly. + */ + mark_reserved_regions_for_nid(nid); sparse_memory_present_with_active_regions(nid); + } } void __init paging_init(void) -- cgit v1.2.3 From d015fe9951641b2d869a7ae4a690be2a05a9dc7f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Nov 2008 09:51:22 +0000 Subject: powerpc/cell/axon-msi: Retry on missing interrupt The MSI capture logic for the axon bridge can sometimes lose interrupts in case of high DMA and interrupt load, when it signals an MSI interrupt to the MPIC interrupt controller while we are already handling another MSI. Each MSI vector gets written into a FIFO buffer in main memory using DMA, and that DMA access is normally flushed by the actual interrupt packet on the IOIF. An MMIO register in the MSIC holds the position of the last entry in the FIFO buffer that was written. However, reading that position does not flush the DMA, so that we can observe stale data in the buffer. In a stress test, we have observed the DMA to arrive up to 14 microseconds after reading the register. This patch works around this problem by retrying the access to the FIFO buffer. We can reliably detect the conditioning by writing an invalid MSI vector into the FIFO buffer after reading from it, assuming that all MSIs we get are valid. After detecting an invalid MSI vector, we udelay(1) in the interrupt cascade for up to 100 times before giving up. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/axon_msi.c | 36 +++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index 896548ba1ca..442cf36aa17 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -95,6 +95,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) struct axon_msic *msic = get_irq_data(irq); u32 write_offset, msi; int idx; + int retry = 0; write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG); pr_debug("axon_msi: original write_offset 0x%x\n", write_offset); @@ -102,7 +103,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) /* write_offset doesn't wrap properly, so we have to mask it */ write_offset &= MSIC_FIFO_SIZE_MASK; - while (msic->read_offset != write_offset) { + while (msic->read_offset != write_offset && retry < 100) { idx = msic->read_offset / sizeof(__le32); msi = le32_to_cpu(msic->fifo_virt[idx]); msi &= 0xFFFF; @@ -110,13 +111,37 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) pr_debug("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); + if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) { + generic_handle_irq(msi); + msic->fifo_virt[idx] = cpu_to_le32(0xffffffff); + } else { + /* + * Reading the MSIC_WRITE_OFFSET_REG does not + * reliably flush the outstanding DMA to the + * FIFO buffer. Here we were reading stale + * data, so we need to retry. + */ + udelay(1); + retry++; + pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + continue; + } + + if (retry) { + pr_debug("axon_msi: late irq 0x%x, retry %d\n", + msi, retry); + retry = 0; + } + msic->read_offset += MSIC_FIFO_ENTRY_SIZE; msic->read_offset &= MSIC_FIFO_SIZE_MASK; + } - if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) - generic_handle_irq(msi); - else - pr_debug("axon_msi: invalid irq 0x%x!\n", msi); + if (retry) { + printk(KERN_WARNING "axon_msi: irq timed out\n"); + + msic->read_offset += MSIC_FIFO_ENTRY_SIZE; + msic->read_offset &= MSIC_FIFO_SIZE_MASK; } desc->chip->eoi(irq); @@ -364,6 +389,7 @@ static int axon_msi_probe(struct of_device *device, dn->full_name); goto out_free_fifo; } + memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP, NR_IRQS, &msic_host_ops, 0); -- cgit v1.2.3 From cc353c30bbdb84f4317a6c149ebb11cde2232e40 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Nov 2008 09:51:23 +0000 Subject: powerpc/mpic: Don't reset affinity for secondary MPIC on boot Kexec/kdump currently fails on the IBM QS2x blades when the kexec happens on a CPU other than the initial boot CPU. It turns out that this is the result of mpic_init trying to set affinity of each interrupt vector to the current boot CPU. As far as I can tell, the same problem is likely to exist on any secondary MPIC, because they have to deliver interrupts to the first output all the time. There are two potential solutions for this: either not set up affinity at all for secondary MPICs, or assume that a single CPU output is connected to the upstream interrupt controller and hardcode affinity to that per architecture. This patch implements the second approach, defaulting to the first output. Currently, all known secondary MPICs are routed to their upstream port using the first destination, so we hardcode that. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index f6299cca781..b24e1d08555 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1271,6 +1271,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) void __init mpic_init(struct mpic *mpic) { int i; + int cpu; BUG_ON(mpic->num_sources == 0); @@ -1313,6 +1314,11 @@ void __init mpic_init(struct mpic *mpic) mpic_pasemi_msi_init(mpic); + if (mpic->flags & MPIC_PRIMARY) + cpu = hard_smp_processor_id(); + else + cpu = 0; + for (i = 0; i < mpic->num_sources; i++) { /* start with vector = source number, and masked */ u32 vecpri = MPIC_VECPRI_MASK | i | @@ -1323,8 +1329,7 @@ void __init mpic_init(struct mpic *mpic) continue; /* init hw */ mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri); - mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), - 1 << hard_smp_processor_id()); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu); } /* Init spurious vector */ -- cgit v1.2.3 From 960cedb4e3eedec6394f224fc832c7a23f35a799 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Nov 2008 09:51:24 +0000 Subject: powerpc/cell: Fix GDB watchpoints, again An earlier patch from Jens Osterkamp attempted to fix GDB watchpoints by enabling the DABRX register at boot time. Unfortunately, this did not work on SMP setups, where secondary CPUs were still using the power-on DABRX value. This introduces the same change for secondary CPUs on cell as well. Reported-by: Ulrich Weigand Tested-by: Ulrich Weigand Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/smp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index c0d86e1f56e..9046803c827 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -129,10 +129,15 @@ static int __init smp_iic_probe(void) return cpus_weight(cpu_possible_map); } -static void __devinit smp_iic_setup_cpu(int cpu) +static void __devinit smp_cell_setup_cpu(int cpu) { if (cpu != boot_cpuid) iic_setup_cpu(); + + /* + * change default DABRX to allow user watchpoints + */ + mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); } static DEFINE_SPINLOCK(timebase_lock); @@ -192,7 +197,7 @@ static struct smp_ops_t bpa_iic_smp_ops = { .message_pass = smp_iic_message_pass, .probe = smp_iic_probe, .kick_cpu = smp_cell_kick_cpu, - .setup_cpu = smp_iic_setup_cpu, + .setup_cpu = smp_cell_setup_cpu, .cpu_bootable = smp_cell_cpu_bootable, }; -- cgit v1.2.3 From ab598b6680f1e74c267d1547ee352f3e1e530f89 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 30 Nov 2008 11:49:45 +0000 Subject: powerpc: Fix system calls on Cell entered with XER.SO=1 It turns out that on Cell, on a kernel with CONFIG_VIRT_CPU_ACCOUNTING = y, if a program sets the SO (summary overflow) bit in the XER and then does a system call, the SO bit in CR0 will be set on return regardless of whether the system call detected an error. Since CR0.SO is used as the error indication from the system call, this means that all system calls appear to fail. The reason is that the workaround for the timebase bug on Cell uses a compare instruction. With CONFIG_VIRT_CPU_ACCOUNTING = y, the ACCOUNT_CPU_USER_ENTRY macro reads the timebase, so we end up doing a compare instruction, which copies XER.SO to CR0.SO. Since we were doing this in the system call entry patch after clearing CR0.SO but before saving the CR, this meant that the saved CR image had CR0.SO set if XER.SO was set on entry. This fixes it by moving the clearing of CR0.SO to after the ACCOUNT_CPU_USER_ENTRY call in the system call entry path. Signed-off-by: Paul Mackerras Acked-by: Arnd Bergmann Acked-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index e6d52845854..e0bcf935428 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -57,12 +57,18 @@ system_call_common: beq- 1f ld r1,PACAKSAVE(r13) 1: std r10,0(r1) - crclr so std r11,_NIP(r1) std r12,_MSR(r1) std r0,GPR0(r1) std r10,GPR1(r1) ACCOUNT_CPU_USER_ENTRY(r10, r11) + /* + * This "crclr so" clears CR0.SO, which is the error indication on + * return from this system call. There must be no cmp instruction + * between it and the "mfcr r9" below, otherwise if XER.SO is set, + * CR0.SO will get set, causing all system calls to appear to fail. + */ + crclr so std r2,GPR2(r1) std r3,GPR3(r1) std r4,GPR4(r1) -- cgit v1.2.3 From a1e0eb104249817e5251bd4aade50921ffcb2159 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Sun, 16 Nov 2008 11:44:42 +0000 Subject: powerpc: Fix build for 32-bit SMP configs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit attr_smt_snooze_delay is only defined for CONFIG_PPC64, so protect the attribute removal with the same condition. This fixes this build error on 32-bit SMP configurations: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c: In function ‘unregister_cpu_online’: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: ‘attr_smt_snooze_delay’ undeclared (first use in this function) /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: (Each undeclared identifier is reported only once /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: for each function it appears in.) Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/sysfs.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 86a2ffccef2..20885a38237 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -717,9 +717,11 @@ static void unregister_cpu_online(unsigned int cpu) BUG_ON(!c->hotpluggable); +#ifdef CONFIG_PPC64 if (!firmware_has_feature(FW_FEATURE_ISERIES) && cpu_has_feature(CPU_FTR_SMT)) sysdev_remove_file(s, &attr_smt_snooze_delay); +#endif /* PMC stuff */ switch (cur_cpu_spec->pmc_type) { -- cgit v1.2.3 From 33b07db9f38fe73b3895f8d4db8fdee03e3afec3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 1 Dec 2008 07:55:14 -0800 Subject: Revert "of_platform_driver noise on sparce" This reverts commit e669dae6141ff97d3c7566207f5de3b487dcf837, since it is incomplete, and clashes with fuller patches and the sparc 32/64 unification effort. Requested-by: David Miller Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/pci_fire.c | 2 +- arch/sparc64/kernel/pci_psycho.c | 4 ++-- arch/sparc64/kernel/pci_sun4v.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c index fcbbac66e14..9462b68f489 100644 --- a/arch/sparc64/kernel/pci_fire.c +++ b/arch/sparc64/kernel/pci_fire.c @@ -455,7 +455,7 @@ static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __init fire_probe(struct of_device *op, +static int __devinit fire_probe(struct of_device *op, const struct of_device_id *match) { struct device_node *dp = op->node; diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 56605adbb5b..dfb3ec89298 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -493,7 +493,7 @@ static void __init psycho_pbm_init(struct pci_pbm_info *pbm, psycho_scan_bus(pbm, &op->dev); } -static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid) +static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) { struct pci_pbm_info *pbm; @@ -506,7 +506,7 @@ static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __init psycho_probe(struct of_device *op, +static int __devinit psycho_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *pr_regs; diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 4b27b0e10ce..34a1fded394 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -929,7 +929,7 @@ static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __init pci_sun4v_probe(struct of_device *op, +static int __devinit pci_sun4v_probe(struct of_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *regs; -- cgit v1.2.3 From b93c35ff39d19f20c47c06c206986afefecc777a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 1 Dec 2008 13:13:57 -0800 Subject: spi: fix spi_s3c24xx_gpio num_chipselect The spi master driver must have num_chipselect set to allow the bus to initialise. Pass this through the platform data. Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h index 3fe8be9ca11..980a099e209 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h @@ -18,6 +18,7 @@ struct s3c2410_spigpio_info { unsigned long pin_mosi; unsigned long pin_miso; + int num_chipselect; int bus_num; void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -- cgit v1.2.3 From 4280e3126f641898f0ed1a931645373d3489e2a6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 1 Dec 2008 13:14:00 -0800 Subject: frv: fix mmap2 error handling Fix the error handling in sys_mmap2(). Currently, if the pgoff check fails, fput() might have to be called (which it isn't), so do the pgoff check first, before fget() is called. Signed-off-by: David Howells Reported-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/sys_frv.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c index 49b2cf2c38f..baadc97f862 100644 --- a/arch/frv/kernel/sys_frv.c +++ b/arch/frv/kernel/sys_frv.c @@ -35,22 +35,21 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, int error = -EBADF; struct file * file = NULL; - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - /* As with sparc32, make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have.... */ /* But unlike sparc32, don't just silently break if we're trying to map something we can't */ - if (pgoff & ((1<<(PAGE_SHIFT-12))-1)) + if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) return -EINVAL; + pgoff >>= PAGE_SHIFT - 12; - pgoff >>= (PAGE_SHIFT - 12); + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } down_write(¤t->mm->mmap_sem); error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); -- cgit v1.2.3 From fb6f552930e52699c8ac452c5a79ec3e97e6fc73 Mon Sep 17 00:00:00 2001 From: Ronen Shitrit Date: Wed, 17 Sep 2008 10:08:05 +0300 Subject: [ARM] Orion: add the option to support different ehci phy initialization The Orion ehci driver serves the Orion, kirkwood and DD Soc families. Since each of those integrate a different USB phy we should have the ability to use few initialization sequences or to leave the boot loader phy settings as is. Signed-off-by: Ronen Shitrit --- arch/arm/mach-kirkwood/common.c | 1 + arch/arm/mach-mv78xx0/common.c | 1 + arch/arm/mach-orion5x/common.c | 1 + arch/arm/plat-orion/include/plat/ehci-orion.h | 8 ++++++++ 4 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0bb1fbd84cc..b5c684d96e4 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -57,6 +57,7 @@ void __init kirkwood_map_io(void) ****************************************************************************/ static struct orion_ehci_data kirkwood_ehci_data = { .dram = &kirkwood_mbus_dram_info, + .phy_version = EHCI_PHY_NA, }; static u64 ehci_dmamask = 0xffffffffUL; diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 238a2f8c2d5..b0e4e0d8f50 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -167,6 +167,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ static struct orion_ehci_data mv78xx0_ehci_data = { .dram = &mv78xx0_mbus_dram_info, + .phy_version = EHCI_PHY_NA, }; static u64 ehci_dmamask = 0xffffffffUL; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 437065c25c9..0a623379789 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -72,6 +72,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ static struct orion_ehci_data orion5x_ehci_data = { .dram = &orion5x_mbus_dram_info, + .phy_version = EHCI_PHY_ORION, }; static u64 ehci_dmamask = 0xffffffffUL; diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h index 64343051095..4ec668e7746 100644 --- a/arch/arm/plat-orion/include/plat/ehci-orion.h +++ b/arch/arm/plat-orion/include/plat/ehci-orion.h @@ -11,8 +11,16 @@ #include +enum orion_ehci_phy_ver { + EHCI_PHY_ORION, + EHCI_PHY_DD, + EHCI_PHY_KW, + EHCI_PHY_NA, +}; + struct orion_ehci_data { struct mbus_dram_target_info *dram; + enum orion_ehci_phy_ver phy_version; }; -- cgit v1.2.3 From a93f44c1751ef1afddd4b76058fb3a2f55fe774c Mon Sep 17 00:00:00 2001 From: Matt Palmer Date: Sun, 19 Oct 2008 08:15:09 +1100 Subject: [ARM] DNS323: Read MAC address from flash Based on similar code from the tsx09 series of machines, just rips the MAC address out of flash and stuffs it into the NIC. Tested on a DNS323 rev B1. It's possible (though unlikely) that an A1 will have the MAC in a different location in flash. Signed-off-by: Matt Palmer --- arch/arm/mach-orion5x/dns323-setup.c | 111 ++++++++++++++++++++++++++++++----- 1 file changed, 95 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 3e66098340a..4053bd35476 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -74,14 +74,6 @@ static int __init dns323_pci_init(void) subsys_initcall(dns323_pci_init); -/**************************************************************************** - * Ethernet - */ - -static struct mv643xx_eth_platform_data dns323_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - /**************************************************************************** * 8MiB NOR flash (Spansion S29GL064M90TFIR4) * @@ -142,6 +134,90 @@ static struct platform_device dns323_nor_flash = { .num_resources = 1, }; +/**************************************************************************** + * Ethernet + */ + +static struct mv643xx_eth_platform_data dns323_eth_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these + * functions be kept somewhere? + */ +static int __init dns323_parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init dns323_parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = dns323_parse_hex_nibble(b[0]); + lo = dns323_parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init dns323_read_mac_addr(void) +{ + u_int8_t addr[6]; + int i; + char *mac_page; + + /* MAC address is stored as a regular ol' string in /dev/mtdblock4 + * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). + */ + mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024); + if (!mac_page) + return -ENOMEM; + + /* Sanity check the string we're looking at */ + for (i = 0; i < 5; i++) { + if (*(mac_page + (i * 3) + 2) != ':') { + goto error_fail; + } + } + + for (i = 0; i < 6; i++) { + int byte; + + byte = dns323_parse_hex_byte(mac_page + (i * 3)); + if (byte < 0) { + goto error_fail; + } + + addr[i] = byte; + } + + iounmap(mac_page); + printk("DNS323: Found ethernet MAC address: "); + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(dns323_eth_data.mac_addr, addr, 6); + + return 0; + +error_fail: + iounmap(mac_page); + return -EINVAL; +} + /**************************************************************************** * GPIO LEDs (simple - doesn't use hardware blinking support) */ @@ -267,14 +343,6 @@ static void __init dns323_init(void) orion5x_mpp_conf(dns323_mpp_modes); writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_eth_init(&dns323_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 */ @@ -288,6 +356,17 @@ static void __init dns323_init(void) i2c_register_board_info(0, dns323_i2c_devices, ARRAY_SIZE(dns323_i2c_devices)); + /* + * Configure peripherals. + */ + if (dns323_read_mac_addr() < 0) + printk("DNS323: Failed to read MAC address\n"); + + orion5x_ehci0_init(); + orion5x_eth_init(&dns323_eth_data); + orion5x_i2c_init(); + orion5x_uart0_init(); + /* register dns323 specific power-off method */ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) -- cgit v1.2.3 From f93e4159b14c5edbaae9916d42ad685aa2f927d1 Mon Sep 17 00:00:00 2001 From: Matt Palmer Date: Wed, 22 Oct 2008 10:16:36 +0200 Subject: [ARM] DNS323: Initialise 88F5182 correctly The 88F5182 found in the DNS-323 rev B1 (and some other devices, such as the CH3SNAS) require different initialisation of the SATA controller and MPP registers. Tested on a DNS-323 rev B1. Signed-off-by: Matt Palmer --- arch/arm/mach-orion5x/dns323-setup.c | 65 +++++++++++++++++++++++++++++++++--- 1 file changed, 61 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 4053bd35476..0722d6510df 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -64,9 +65,21 @@ static struct hw_pci dns323_pci __initdata = { .map_irq = dns323_pci_map_irq, }; +static int __init dns323_dev_id(void) +{ + u32 dev, rev; + + orion5x_pcie_id(&dev, &rev); + + return dev; +} + static int __init dns323_pci_init(void) { - if (machine_is_dns323()) + /* The 5182 doesn't really use it's PCI bus, and initialising PCI + * gets in the way of initialising the SATA controller. + */ + if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID) pci_common_init(&dns323_pci); return 0; @@ -283,10 +296,17 @@ static struct platform_device dns323_button_device = { }, }; +/***************************************************************************** + * SATA + */ +static struct mv_sata_platform_data dns323_sata_data = { + .n_ports = 2, +}; + /**************************************************************************** * General Setup */ -static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = { +static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = { { 0, MPP_PCIE_RST_OUTn }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ @@ -310,6 +330,30 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = { { -1 }, }; +static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { + { 0, MPP_UNUSED }, + { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ + { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ + { 3, MPP_UNUSED }, + { 4, MPP_GPIO }, /* power button LED */ + { 5, MPP_GPIO }, /* power button LED */ + { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ + { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ + { 8, MPP_GPIO }, /* triggers power off */ + { 9, MPP_GPIO }, /* power button switch */ + { 10, MPP_GPIO }, /* reset button switch */ + { 11, MPP_UNUSED }, + { 12, MPP_SATA_LED }, + { 13, MPP_SATA_LED }, + { 14, MPP_SATA_LED }, + { 15, MPP_SATA_LED }, + { 16, MPP_UNUSED }, + { 17, MPP_UNUSED }, + { 18, MPP_UNUSED }, + { 19, MPP_UNUSED }, + { -1 }, +}; + /* * On the DNS-323 the following devices are attached via I2C: * @@ -340,8 +384,15 @@ static void __init dns323_init(void) /* Setup basic Orion functions. Need to be called early. */ orion5x_init(); - orion5x_mpp_conf(dns323_mpp_modes); - writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ + /* Just to be tricky, the 5182 has a completely different + * set of MPP modes to the 5181. + */ + if (dns323_dev_id() == MV88F5182_DEV_ID) + orion5x_mpp_conf(dns323_mv88f5182_mpp_modes); + else { + orion5x_mpp_conf(dns323_mv88f5181_mpp_modes); + writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ + } /* setup flash mapping * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 @@ -367,6 +418,12 @@ static void __init dns323_init(void) orion5x_i2c_init(); orion5x_uart0_init(); + /* The 5182 has it's SATA controller on-chip, and needs it's own little + * init routine. + */ + if (dns323_dev_id() == MV88F5182_DEV_ID) + orion5x_sata_init(&dns323_sata_data); + /* register dns323 specific power-off method */ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) -- cgit v1.2.3 From d15fb9efe91b7198f2234783ab1d496ab1ee7b58 Mon Sep 17 00:00:00 2001 From: Ronen Shitrit Date: Sun, 19 Oct 2008 23:10:14 +0200 Subject: [ARM] Kirkwood: allow instantiating the second ethernet port The 88f6192 and 88f6281 Kirkwood SoCs support two ethernet ports. Add the platform glue that will allow board support files to instantiate the second ethernet port. Signed-off-by: Ronen Shitrit Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 58 ++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 1 + arch/arm/mach-kirkwood/include/mach/irqs.h | 1 + 3 files changed, 60 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index b5c684d96e4..7b8ef97fb50 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -153,6 +153,64 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) } +/***************************************************************************** + * GE01 + ****************************************************************************/ +struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = { + .dram = &kirkwood_mbus_dram_info, + .shared_smi = &kirkwood_ge00_shared, +}; + +static struct resource kirkwood_ge01_shared_resources[] = { + { + .name = "ge01 base", + .start = GE01_PHYS_BASE + 0x2000, + .end = GE01_PHYS_BASE + 0x3fff, + .flags = IORESOURCE_MEM, + }, { + .name = "ge01 err irq", + .start = IRQ_KIRKWOOD_GE01_ERR, + .end = IRQ_KIRKWOOD_GE01_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_ge01_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &kirkwood_ge01_shared_data, + }, + .num_resources = ARRAY_SIZE(kirkwood_ge01_shared_resources), + .resource = kirkwood_ge01_shared_resources, +}; + +static struct resource kirkwood_ge01_resources[] = { + { + .name = "ge01 irq", + .start = IRQ_KIRKWOOD_GE01_SUM, + .end = IRQ_KIRKWOOD_GE01_SUM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_ge01 = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = 1, + .resource = kirkwood_ge01_resources, +}; + +void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) +{ + eth_data->shared = &kirkwood_ge01_shared; + kirkwood_ge01.dev.platform_data = eth_data; + + platform_device_register(&kirkwood_ge01_shared); + platform_device_register(&kirkwood_ge01); +} + + /***************************************************************************** * Ethernet switch ****************************************************************************/ diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5774632a67e..fe367c18e72 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -30,6 +30,7 @@ void kirkwood_pcie_id(u32 *dev, u32 *rev); void kirkwood_ehci_init(void); void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); +void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data); void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq); void kirkwood_pcie_init(void); void kirkwood_rtc_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h index ffab89f21c1..3a964bb1497 100644 --- a/arch/arm/mach-kirkwood/include/mach/irqs.h +++ b/arch/arm/mach-kirkwood/include/mach/irqs.h @@ -51,6 +51,7 @@ #define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40 #define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 #define IRQ_KIRKWOOD_GE00_ERR 46 +#define IRQ_KIRKWOOD_GE01_ERR 47 /* * KIRKWOOD General Purpose Pins -- cgit v1.2.3 From 37787e449b39202afae13b6c47505ae9e977cae3 Mon Sep 17 00:00:00 2001 From: Ronen Shitrit Date: Sun, 19 Oct 2008 23:19:07 +0200 Subject: [ARM] Kirkwood: properly handle the WAN port on newer RD88F6281 boards On newer versions of the RD88F6281 board, the WAN port is connected to its own ethernet port on the CPU, via a separate PHY, whereas on older versions of the board, it is connected to one of the PHYs in the ethernet switch. In the RD8F6281 setup code, detect which version of the board we are running on, and instantiate the ethernet ports and switch driver accordingly. Signed-off-by: Ronen Shitrit Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/rd88f6281-setup.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 175054abd63..9a0e905d10c 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -80,24 +80,38 @@ static struct dsa_platform_data rd88f6281_switch_data = { .port_names[1] = "lan2", .port_names[2] = "lan3", .port_names[3] = "lan4", - .port_names[4] = "wan", .port_names[5] = "cpu", }; +static struct mv643xx_eth_platform_data rd88f6281_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(11), +}; + static struct mv_sata_platform_data rd88f6281_sata_data = { .n_ports = 2, }; static void __init rd88f6281_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ kirkwood_init(); kirkwood_ehci_init(); + kirkwood_ge00_init(&rd88f6281_ge00_data); + kirkwood_pcie_id(&dev, &rev); + if (rev == MV88F6281_REV_A0) { + rd88f6281_switch_data.sw_addr = 10; + kirkwood_ge01_init(&rd88f6281_ge01_data); + } else { + rd88f6281_switch_data.port_names[4] = "wan"; + } kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ); + kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_uart0_init(); -- cgit v1.2.3 From b71b9effb5c6aad49682f963291b06018b44ed38 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 4 Dec 2008 01:03:57 -0500 Subject: [ARM] Feroceon: pass proper -mtune argument to gcc Compilation for the Feroceon core should use -mtune=marvell-f. This is available in Code Sourcery's 2008Q3 release at the moment. Otherwise fall back to -mtune-=xscale. Signed-off-by: Nicolas Pitre --- arch/arm/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index bd6e28115eb..384f6b16bfd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -76,6 +76,7 @@ tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale) tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) -- cgit v1.2.3 From 58c2467355ed3154a12ee49d8f8236547145c9d3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 4 Dec 2008 00:22:11 -0500 Subject: [ARM] Kirkwood: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/kirkwood_defconfig | 329 ++++++++++++++++++++++++++---------- 1 file changed, 239 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index e3357ba10f1..ab8b1e0d0da 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Sun Jun 22 15:51:25 2008 +# Linux kernel version: 2.6.28-rc7 +# Thu Dec 4 15:27:39 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -49,14 +48,17 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y +# CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -73,9 +75,12 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set @@ -85,8 +90,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -97,12 +101,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,6 +122,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -128,7 +134,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -158,7 +163,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set # # Marvell Kirkwood Implementations @@ -199,6 +204,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -217,25 +223,30 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ALIGNMENT_TRAP=y # @@ -247,6 +258,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -260,6 +276,8 @@ CONFIG_CMDLINE="" # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -268,10 +286,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -322,6 +336,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +# CONFIG_NET_DSA_TAG_DSA is not set +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -343,12 +366,12 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -365,6 +388,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -453,7 +478,7 @@ CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y @@ -561,6 +586,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -619,7 +645,6 @@ CONFIG_SATA_MV=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -627,11 +652,14 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -639,7 +667,23 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -650,12 +694,16 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -676,14 +724,12 @@ CONFIG_NET_PCI=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -699,6 +745,8 @@ CONFIG_E1000_NAPI=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -765,7 +813,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -775,7 +827,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -800,44 +852,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_GPIO is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -864,20 +936,26 @@ CONFIG_SPI_ORION=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -910,8 +988,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # -# Sound +# Console display driver support # +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -922,9 +1002,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -940,8 +1047,9 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -956,20 +1064,23 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y +CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -992,7 +1103,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1005,7 +1115,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1023,8 +1133,12 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y # CONFIG_LEDS_CLASS is not set @@ -1038,6 +1152,8 @@ CONFIG_NEW_LEDS=y # CONFIG_LEDS_TRIGGERS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # @@ -1056,7 +1172,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set -CONFIG_RTC_DRV_MV=y # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set @@ -1064,29 +1179,39 @@ CONFIG_RTC_DRV_MV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y # @@ -1099,6 +1224,8 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set # @@ -1109,11 +1236,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1131,7 +1259,7 @@ CONFIG_INOTIFY_USER=y # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=y +CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m @@ -1140,9 +1268,9 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set @@ -1152,6 +1280,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1182,6 +1311,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1192,13 +1322,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1210,24 +1340,8 @@ CONFIG_SUNRPC=y # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1284,11 +1398,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1300,21 +1417,40 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1326,6 +1462,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y @@ -1333,8 +1470,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1373,6 +1514,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1403,6 +1548,11 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1410,10 +1560,9 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v1.2.3