From 4c7f8900f1d8a0e464e7092f132a7e93f7c20f2f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 23 Feb 2008 07:06:55 +0100
Subject: x86: stackprotector & PARAVIRT fix

on paravirt enabled 64-bit kernels the paravirt ops do function
calls themselves - which is bad with the stackprotector - for
example pda_init() loads 0 into %gs and then does MSR_GS_BASE
write (which modifies gs.base) - but that MSR write is a function
call on paravirt, which with stackprotector tries to read the
stack canary from the PDA ... crashing the bootup.

the solution was suggested by Arjan van de Ven: to exclude paravirt.c
from stackprotector, too many lowlevel functionality is in it. It's
not like we'll have paravirt functions with character arrays on
their stack anyway...

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5e618c3b472..8161e5a91ca 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -14,6 +14,7 @@ nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_vsyscall_64.o	:= $(PROFILING) -g0 $(nostackp)
 CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc_64.o		:= $(nostackp)
+CFLAGS_paravirt.o	:= $(nostackp)
 
 obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
 obj-y			+= traps_$(BITS).o irq_$(BITS).o
-- 
cgit v1.2.3


From e00320875d0cc5f8099a7227b2f25fbb3231268d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 14 Feb 2008 08:48:23 +0100
Subject: x86: fix stackprotector canary updates during context switches

fix a bug noticed and fixed by pageexec@freemail.hu.

if built with -fstack-protector-all then we'll have canary checks built
into the __switch_to() function. That does not work well with the
canary-switching code there: while we already use the %rsp of the
new task, we still call __switch_to() whith the previous task's canary
value in the PDA, hence the __switch_to() ssp prologue instructions
will store the previous canary. Then we update the PDA and upon return
from __switch_to() the canary check triggers and we panic.

so update the canary after we have called __switch_to(), where we are
at the same stackframe level as the last stackframe of the next
(and now freshly current) task.

Note: this means that we call __switch_to() [and its sub-functions]
still with the old canary, but that is not a problem, both the previous
and the next task has a high-quality canary. The only (mostly academic)
disadvantage is that the canary of one task may leak onto the stack of
another task, increasing the risk of information leaks, were an attacker
able to read the stack of specific tasks (but not that of others).

To solve this we'll have to reorganize the way we switch tasks, and move
the PDA setting into the switch_to() assembly code. That will happen in
another patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process_64.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f39988..d8640388039 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -640,7 +640,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	write_pda(kernelstack,
 	(unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
 #ifdef CONFIG_CC_STACKPROTECTOR
-	write_pda(stack_canary, next_p->stack_canary);
 	/*
 	 * Build time only check to make sure the stack_canary is at
 	 * offset 40 in the pda; this is a gcc ABI requirement
-- 
cgit v1.2.3


From ce22bd92cba0958e052cb1ce0f89f1d3a02b60a7 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Mon, 12 May 2008 15:44:31 +0200
Subject: x86: setup stack canary for the idle threads

The idle threads for non-boot CPUs are a bit special in how they
are created; the result is that these don't have the stack canary
set up properly in their PDA. Easiest fix is to just always set
the PDA up correctly when entering the idle thread; this is a NOP
for the boot cpu.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process_64.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index d8640388039..9e69e223023 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -146,6 +146,15 @@ static inline void play_dead(void)
 void cpu_idle(void)
 {
 	current_thread_info()->status |= TS_POLLING;
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+	/*
+	 * If we're the non-boot CPU, nothing set the PDA stack
+	 * canary up for us. This is as good a place as any for
+	 * doing that.
+	 */
+	write_pda(stack_canary, current->stack_canary);
+#endif
 	/* endless idle loop with no priority at all */
 	while (1) {
 		tick_nohz_stop_sched_tick();
-- 
cgit v1.2.3


From 7e09b2a02dae4616a5a26000169964b32f86cd35 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 14 Feb 2008 09:22:34 +0100
Subject: x86: fix canary of the boot CPU's idle task

the boot CPU's idle task has a zero stackprotector canary value.

this is a special task that is never forked, so the fork code
does not randomize its canary. Do it when we hit cpu_idle().

Academic sidenote: this means that the early init code runs with a
zero canary and hence the canary becomes predictable for this short,
boot-only amount of time.

Although attack vectors against early init code are very rare, it might
make sense to move this initialization to an earlier point.
(to one of the early init functions that never return - such as
start_kernel())

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process_64.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 9e69e223023..d4c7ac7aa43 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -150,9 +150,13 @@ void cpu_idle(void)
 #ifdef CONFIG_CC_STACKPROTECTOR
 	/*
 	 * If we're the non-boot CPU, nothing set the PDA stack
-	 * canary up for us. This is as good a place as any for
-	 * doing that.
+	 * canary up for us - and if we are the boot CPU we have
+	 * a 0 stack canary. This is a good place for updating
+	 * it, as we wont ever return from this function (so the
+	 * invalid canaries already on the stack wont ever
+	 * trigger):
 	 */
+	current->stack_canary = get_random_int();
 	write_pda(stack_canary, current->stack_canary);
 #endif
 	/* endless idle loop with no priority at all */
-- 
cgit v1.2.3


From 72370f2a5b227bd3817593a6b15ea3f53f51dfcb Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 13 Feb 2008 16:15:34 +0100
Subject: x86: if stackprotector is enabled, thn use stack-protector-all by
 default

also enable the rodata and nx tests.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/Kconfig       | 3 ++-
 arch/x86/Kconfig.debug | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index dcbec34154c..83d8392c133 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1142,7 +1142,7 @@ config SECCOMP
 
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on X86_64 && EXPERIMENTAL && BROKEN
+	depends on X86_64
 	help
          This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of critical functions, a canary
@@ -1159,6 +1159,7 @@ config CC_STACKPROTECTOR
 config CC_STACKPROTECTOR_ALL
 	bool "Use stack-protector for all functions"
 	depends on CC_STACKPROTECTOR
+	default y
 	help
 	  Normally, GCC only inserts the canary value protection for
 	  functions that use large-ish on-stack buffers. By enabling
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ac1e31ba479..b5c5b55d043 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -102,6 +102,7 @@ config DIRECT_GBPAGES
 config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
+	default y
 	help
 	  This option enables a testcase for the DEBUG_RODATA
 	  feature as well as for the change_page_attr() infrastructure.
-- 
cgit v1.2.3


From 18aa8bb12dcb10adc3d7c9d69714d53667c0ab7f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 14 Feb 2008 09:42:02 +0100
Subject: stackprotector: add boot_init_stack_canary()

add the boot_init_stack_canary() and make the secondary idle threads
use it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process_64.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index d4c7ac7aa43..5107cb214c7 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -147,7 +147,6 @@ void cpu_idle(void)
 {
 	current_thread_info()->status |= TS_POLLING;
 
-#ifdef CONFIG_CC_STACKPROTECTOR
 	/*
 	 * If we're the non-boot CPU, nothing set the PDA stack
 	 * canary up for us - and if we are the boot CPU we have
@@ -156,9 +155,8 @@ void cpu_idle(void)
 	 * invalid canaries already on the stack wont ever
 	 * trigger):
 	 */
-	current->stack_canary = get_random_int();
-	write_pda(stack_canary, current->stack_canary);
-#endif
+	boot_init_stack_canary();
+
 	/* endless idle loop with no priority at all */
 	while (1) {
 		tick_nohz_stop_sched_tick();
-- 
cgit v1.2.3


From 420594296838fdc9a674470d710cda7d1487f9f4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 14 Feb 2008 09:44:08 +0100
Subject: x86: fix the stackprotector canary of the boot CPU

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process_64.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 5107cb214c7..cce47f7fbf2 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -16,6 +16,7 @@
 
 #include <stdarg.h>
 
+#include <linux/stackprotector.h>
 #include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
-- 
cgit v1.2.3


From 113c5413cf9051cc50b88befdc42e3402bb92115 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 14 Feb 2008 10:36:03 +0100
Subject: x86: unify stackprotector features

streamline the stackprotector features under a single option
and make the stronger feature the one accessible.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/Kconfig | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 83d8392c133..0cd1695c24f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1140,13 +1140,17 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config CC_STACKPROTECTOR_ALL
+	bool
+
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
 	depends on X86_64
+	select CC_STACKPROTECTOR_ALL
 	help
-         This option turns on the -fstack-protector GCC feature. This
-	  feature puts, at the beginning of critical functions, a canary
-	  value on the stack just before the return address, and validates
+          This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
 	  the value just before actually returning.  Stack based buffer
 	  overflows (that need to overwrite this return address) now also
 	  overwrite the canary, which gets detected and the attack is then
@@ -1154,16 +1158,8 @@ config CC_STACKPROTECTOR
 
 	  This feature requires gcc version 4.2 or above, or a distribution
 	  gcc with the feature backported. Older versions are automatically
-	  detected and for those versions, this configuration option is ignored.
-
-config CC_STACKPROTECTOR_ALL
-	bool "Use stack-protector for all functions"
-	depends on CC_STACKPROTECTOR
-	default y
-	help
-	  Normally, GCC only inserts the canary value protection for
-	  functions that use large-ish on-stack buffers. By enabling
-	  this option, GCC will be asked to do this for ALL functions.
+	  detected and for those versions, this configuration option is
+	  ignored. (and a warning is printed during bootup)
 
 source kernel/Kconfig.hz
 
-- 
cgit v1.2.3


From b40a4392a3c262e0d1b5379b4e142a8eefa63439 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 18 Apr 2008 06:16:45 -0700
Subject: stackprotector: turn not having the right gcc into a #warning

If the user selects the stack-protector config option, but does not have
a gcc that has the right bits enabled (for example because it isn't build
with a glibc that supports TLS, as is common for cross-compilers, but also
because it may be too old), then the runtime test fails right now.

This patch adds a warning message for this scenario. This warning accomplishes
two goals
1) the user is informed that the security option he selective isn't available
2) the user is suggested to turn of the CONFIG option that won't work for him,
   and would make the runtime test fail anyway.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 3cff3c894cf..c3e0eeeb1dd 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -73,7 +73,7 @@ else
 
         stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
         stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
-                "$(CC)" -fstack-protector )
+                "$(CC)" "-fstack-protector -DGCC_HAS_SP" )
         stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
                 "$(CC)" -fstack-protector-all )
 
-- 
cgit v1.2.3


From 7c9f8861e6c9c839f913e49b98c3854daca18f27 Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@sandeen.net>
Date: Tue, 22 Apr 2008 16:38:23 -0500
Subject: stackprotector: use canary at end of stack to indicate overruns at
 oops time

(Updated with a common max-stack-used checker that knows about
the canary, as suggested by Joe Perches)

Use a canary at the end of the stack to clearly indicate
at oops time whether the stack has ever overflowed.

This is a very simple implementation with a couple of
drawbacks:

1) a thread may legitimately use exactly up to the last
   word on the stack

 -- but the chances of doing this and then oopsing later seem slim

2) it's possible that the stack usage isn't dense enough
   that the canary location could get skipped over

 -- but the worst that happens is that we don't flag the overrun
 -- though this happens fairly often in my testing :(

With the code in place, an intentionally-bloated stack oops might
do:

BUG: unable to handle kernel paging request at ffff8103f84cc680
IP: [<ffffffff810253df>] update_curr+0x9a/0xa8
PGD 8063 PUD 0
Thread overran stack or stack corrupted
Oops: 0000 [1] SMP
CPU 0
...

... unless the stack overrun is so bad that it corrupts some other
thread.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/mm/fault.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fd7e1798c75..1f524df68b9 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -25,6 +25,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
+#include <linux/magic.h>
 
 #include <asm/system.h>
 #include <asm/desc.h>
@@ -581,6 +582,8 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	unsigned long address;
 	int write, si_code;
 	int fault;
+	unsigned long *stackend;
+
 #ifdef CONFIG_X86_64
 	unsigned long flags;
 #endif
@@ -850,6 +853,10 @@ no_context:
 
 	show_fault_oops(regs, error_code, address);
 
+ 	stackend = end_of_stack(tsk);
+	if (*stackend != STACK_END_MAGIC)
+		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
+
 	tsk->thread.cr2 = address;
 	tsk->thread.trap_no = 14;
 	tsk->thread.error_code = error_code;
-- 
cgit v1.2.3


From 1df8130278c4543555fea697e5714fbac300b899 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 8 Dec 2008 15:58:50 +0000
Subject: [ARM] dma: remove dmach_t typedef

Remove a pointless integer typedef.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/dma.h      | 32 +++++++--------
 arch/arm/include/asm/mach/dma.h | 12 +++---
 arch/arm/kernel/dma-isa.c       | 42 ++++++++++----------
 arch/arm/kernel/dma.c           | 86 ++++++++++++++++++++---------------------
 arch/arm/mach-footbridge/dma.c  |  6 +--
 arch/arm/mach-rpc/dma.c         | 20 +++++-----
 6 files changed, 98 insertions(+), 100 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index df5638f3643..c5557a650d1 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -19,8 +19,6 @@
 #include <asm/system.h>
 #include <asm/scatterlist.h>
 
-typedef unsigned int dmach_t;
-
 #include <mach/isa-dma.h>
 
 /*
@@ -52,44 +50,44 @@ static inline void release_dma_lock(unsigned long flags)
 /* Clear the 'DMA Pointer Flip Flop'.
  * Write 0 for LSB/MSB, 1 for MSB/LSB access.
  */
-#define clear_dma_ff(channel)
+#define clear_dma_ff(chan)
 
 /* Set only the page register bits of the transfer address.
  *
  * NOTE: This is an architecture specific function, and should
  *       be hidden from the drivers
  */
-extern void set_dma_page(dmach_t channel, char pagenr);
+extern void set_dma_page(unsigned int chan, char pagenr);
 
 /* Request a DMA channel
  *
  * Some architectures may need to do allocate an interrupt
  */
-extern int  request_dma(dmach_t channel, const char * device_id);
+extern int  request_dma(unsigned int chan, const char * device_id);
 
 /* Free a DMA channel
  *
  * Some architectures may need to do free an interrupt
  */
-extern void free_dma(dmach_t channel);
+extern void free_dma(unsigned int chan);
 
 /* Enable DMA for this channel
  *
  * On some architectures, this may have other side effects like
  * enabling an interrupt and setting the DMA registers.
  */
-extern void enable_dma(dmach_t channel);
+extern void enable_dma(unsigned int chan);
 
 /* Disable DMA for this channel
  *
  * On some architectures, this may have other side effects like
  * disabling an interrupt or whatever.
  */
-extern void disable_dma(dmach_t channel);
+extern void disable_dma(unsigned int chan);
 
 /* Test whether the specified channel has an active DMA transfer
  */
-extern int dma_channel_active(dmach_t channel);
+extern int dma_channel_active(unsigned int chan);
 
 /* Set the DMA scatter gather list for this channel
  *
@@ -97,7 +95,7 @@ extern int dma_channel_active(dmach_t channel);
  * especially since some DMA architectures don't update the
  * DMA address immediately, but defer it to the enable_dma().
  */
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
 
 /* Set the DMA address for this channel
  *
@@ -105,9 +103,9 @@ extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
  * especially since some DMA architectures don't update the
  * DMA address immediately, but defer it to the enable_dma().
  */
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr)				\
-	__set_dma_addr(channel, bus_to_virt(addr))
+extern void __set_dma_addr(unsigned int chan, void *addr);
+#define set_dma_addr(chan, addr)				\
+	__set_dma_addr(chan, bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
@@ -115,7 +113,7 @@ extern void __set_dma_addr(dmach_t channel, void *addr);
  * especially since some DMA architectures don't update the
  * DMA count immediately, but defer it to the enable_dma().
  */
-extern void set_dma_count(dmach_t channel, unsigned long count);
+extern void set_dma_count(unsigned int chan, unsigned long count);
 
 /* Set the transfer direction for this channel
  *
@@ -124,11 +122,11 @@ extern void set_dma_count(dmach_t channel, unsigned long count);
  * DMA transfer direction immediately, but defer it to the
  * enable_dma().
  */
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+extern void set_dma_mode(unsigned int chan, dmamode_t mode);
 
 /* Set the transfer speed for this channel
  */
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
+extern void set_dma_speed(unsigned int chan, int cycle_ns);
 
 /* Get DMA residue count. After a DMA transfer, this
  * should return zero. Reading this while a DMA transfer is
@@ -136,7 +134,7 @@ extern void set_dma_speed(dmach_t channel, int cycle_ns);
  * If called before the channel has been used, it may return 1.
  * Otherwise, it returns the number of _bytes_ left to transfer.
  */
-extern int  get_dma_residue(dmach_t channel);
+extern int  get_dma_residue(unsigned int chan);
 
 #ifndef NO_DMA
 #define NO_DMA	255
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index fc7278ea714..281ae7e40a9 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -15,12 +15,12 @@ struct dma_struct;
 typedef struct dma_struct dma_t;
 
 struct dma_ops {
-	int	(*request)(dmach_t, dma_t *);		/* optional */
-	void	(*free)(dmach_t, dma_t *);		/* optional */
-	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
-	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
-	int	(*residue)(dmach_t, dma_t *);		/* optional */
-	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
+	int	(*request)(unsigned int, dma_t *);		/* optional */
+	void	(*free)(unsigned int, dma_t *);			/* optional */
+	void	(*enable)(unsigned int, dma_t *);		/* mandatory */
+	void 	(*disable)(unsigned int, dma_t *);		/* mandatory */
+	int	(*residue)(unsigned int, dma_t *);		/* optional */
+	int	(*setspeed)(unsigned int, dma_t *, int);	/* optional */
 	char	*type;
 };
 
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 4a3a50495c6..29eca48925d 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -49,25 +49,25 @@ static unsigned int isa_dma_port[8][7] = {
 	{  0xd4,  0xd6,  0xd8,  0x48a,  0x08a,  0xcc, 0xce }
 };
 
-static int isa_get_dma_residue(dmach_t channel, dma_t *dma)
+static int isa_get_dma_residue(unsigned int chan, dma_t *dma)
 {
-	unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT];
+	unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT];
 	int count;
 
 	count = 1 + inb(io_port);
 	count |= inb(io_port) << 8;
 
-	return channel < 4 ? count : (count << 1);
+	return chan < 4 ? count : (count << 1);
 }
 
-static void isa_enable_dma(dmach_t channel, dma_t *dma)
+static void isa_enable_dma(unsigned int chan, dma_t *dma)
 {
 	if (dma->invalid) {
 		unsigned long address, length;
 		unsigned int mode;
 		enum dma_data_direction direction;
 
-		mode = channel & 3;
+		mode = chan & 3;
 		switch (dma->dma_mode & DMA_MODE_MASK) {
 		case DMA_MODE_READ:
 			mode |= ISA_DMA_MODE_READ;
@@ -105,34 +105,34 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma)
 		address = dma->buf.dma_address;
 		length  = dma->buf.length - 1;
 
-		outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]);
-		outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]);
+		outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]);
+		outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]);
 
-		if (channel >= 4) {
+		if (chan >= 4) {
 			address >>= 1;
 			length >>= 1;
 		}
 
-		outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]);
+		outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]);
 
-		outb(address, isa_dma_port[channel][ISA_DMA_ADDR]);
-		outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]);
+		outb(address, isa_dma_port[chan][ISA_DMA_ADDR]);
+		outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]);
 
-		outb(length, isa_dma_port[channel][ISA_DMA_COUNT]);
-		outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]);
+		outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
+		outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
 
 		if (dma->dma_mode & DMA_AUTOINIT)
 			mode |= ISA_DMA_AUTOINIT;
 
-		outb(mode, isa_dma_port[channel][ISA_DMA_MODE]);
+		outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
 		dma->invalid = 0;
 	}
-	outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]);
+	outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]);
 }
 
-static void isa_disable_dma(dmach_t channel, dma_t *dma)
+static void isa_disable_dma(unsigned int chan, dma_t *dma)
 {
-	outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]);
+	outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]);
 }
 
 static struct dma_ops isa_dma_ops = {
@@ -178,11 +178,11 @@ void __init isa_init_dma(dma_t *dma)
 	outb(0xaa, 0x00);
 
 	if (inb(0) == 0x55 && inb(0) == 0xaa) {
-		int channel, i;
+		int chan, i;
 
-		for (channel = 0; channel < 8; channel++) {
-			dma[channel].d_ops = &isa_dma_ops;
-			isa_disable_dma(channel, NULL);
+		for (chan = 0; chan < 8; chan++) {
+			dma[chan].d_ops = &isa_dma_ops;
+			isa_disable_dma(chan, NULL);
 		}
 
 		outb(0x40, 0x0b);
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index d006085ed7e..c31bf00e5ba 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -30,12 +30,12 @@ static dma_t dma_chan[MAX_DMA_CHANNELS];
  *
  * On certain platforms, we have to allocate an interrupt as well...
  */
-int request_dma(dmach_t channel, const char *device_id)
+int request_dma(unsigned int chan, const char *device_id)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 	int ret;
 
-	if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (chan >= MAX_DMA_CHANNELS || !dma->d_ops)
 		goto bad_dma;
 
 	if (xchg(&dma->lock, 1) != 0)
@@ -47,7 +47,7 @@ int request_dma(dmach_t channel, const char *device_id)
 
 	ret = 0;
 	if (dma->d_ops->request)
-		ret = dma->d_ops->request(channel, dma);
+		ret = dma->d_ops->request(chan, dma);
 
 	if (ret)
 		xchg(&dma->lock, 0);
@@ -55,7 +55,7 @@ int request_dma(dmach_t channel, const char *device_id)
 	return ret;
 
 bad_dma:
-	printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel);
+	printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan);
 	return -EINVAL;
 
 busy:
@@ -68,42 +68,42 @@ EXPORT_SYMBOL(request_dma);
  *
  * On certain platforms, we have to free interrupt as well...
  */
-void free_dma(dmach_t channel)
+void free_dma(unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
-	if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (chan >= MAX_DMA_CHANNELS || !dma->d_ops)
 		goto bad_dma;
 
 	if (dma->active) {
-		printk(KERN_ERR "dma%d: freeing active DMA\n", channel);
-		dma->d_ops->disable(channel, dma);
+		printk(KERN_ERR "dma%d: freeing active DMA\n", chan);
+		dma->d_ops->disable(chan, dma);
 		dma->active = 0;
 	}
 
 	if (xchg(&dma->lock, 0) != 0) {
 		if (dma->d_ops->free)
-			dma->d_ops->free(channel, dma);
+			dma->d_ops->free(chan, dma);
 		return;
 	}
 
-	printk(KERN_ERR "dma%d: trying to free free DMA\n", channel);
+	printk(KERN_ERR "dma%d: trying to free free DMA\n", chan);
 	return;
 
 bad_dma:
-	printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
+	printk(KERN_ERR "dma: trying to free DMA%d\n", chan);
 }
 EXPORT_SYMBOL(free_dma);
 
 /* Set DMA Scatter-Gather list
  */
-void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
+void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA SG while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->sg = sg;
 	dma->sgcount = nr_sg;
@@ -115,13 +115,13 @@ EXPORT_SYMBOL(set_dma_sg);
  *
  * Copy address to the structure, and set the invalid bit
  */
-void __set_dma_addr (dmach_t channel, void *addr)
+void __set_dma_addr (unsigned int chan, void *addr)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA address while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->sg = NULL;
 	dma->addr = addr;
@@ -133,13 +133,13 @@ EXPORT_SYMBOL(__set_dma_addr);
  *
  * Copy address to the structure, and set the invalid bit
  */
-void set_dma_count (dmach_t channel, unsigned long count)
+void set_dma_count (unsigned int chan, unsigned long count)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA count while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->sg = NULL;
 	dma->count = count;
@@ -149,13 +149,13 @@ EXPORT_SYMBOL(set_dma_count);
 
 /* Set DMA direction mode
  */
-void set_dma_mode (dmach_t channel, dmamode_t mode)
+void set_dma_mode (unsigned int chan, dmamode_t mode)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA mode while "
-		       "DMA active\n", channel);
+		       "DMA active\n", chan);
 
 	dma->dma_mode = mode;
 	dma->invalid = 1;
@@ -164,42 +164,42 @@ EXPORT_SYMBOL(set_dma_mode);
 
 /* Enable DMA channel
  */
-void enable_dma (dmach_t channel)
+void enable_dma (unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
 	if (!dma->lock)
 		goto free_dma;
 
 	if (dma->active == 0) {
 		dma->active = 1;
-		dma->d_ops->enable(channel, dma);
+		dma->d_ops->enable(chan, dma);
 	}
 	return;
 
 free_dma:
-	printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
+	printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan);
 	BUG();
 }
 EXPORT_SYMBOL(enable_dma);
 
 /* Disable DMA channel
  */
-void disable_dma (dmach_t channel)
+void disable_dma (unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 
 	if (!dma->lock)
 		goto free_dma;
 
 	if (dma->active == 1) {
 		dma->active = 0;
-		dma->d_ops->disable(channel, dma);
+		dma->d_ops->disable(chan, dma);
 	}
 	return;
 
 free_dma:
-	printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
+	printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan);
 	BUG();
 }
 EXPORT_SYMBOL(disable_dma);
@@ -207,36 +207,36 @@ EXPORT_SYMBOL(disable_dma);
 /*
  * Is the specified DMA channel active?
  */
-int dma_channel_active(dmach_t channel)
+int dma_channel_active(unsigned int chan)
 {
-	return dma_chan[channel].active;
+	return dma_chan[chan].active;
 }
 EXPORT_SYMBOL(dma_channel_active);
 
-void set_dma_page(dmach_t channel, char pagenr)
+void set_dma_page(unsigned int chan, char pagenr)
 {
-	printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
+	printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan);
 }
 EXPORT_SYMBOL(set_dma_page);
 
-void set_dma_speed(dmach_t channel, int cycle_ns)
+void set_dma_speed(unsigned int chan, int cycle_ns)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 	int ret = 0;
 
 	if (dma->d_ops->setspeed)
-		ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
+		ret = dma->d_ops->setspeed(chan, dma, cycle_ns);
 	dma->speed = ret;
 }
 EXPORT_SYMBOL(set_dma_speed);
 
-int get_dma_residue(dmach_t channel)
+int get_dma_residue(unsigned int chan)
 {
-	dma_t *dma = dma_chan + channel;
+	dma_t *dma = dma_chan + chan;
 	int ret = 0;
 
 	if (dma->d_ops->residue)
-		ret = dma->d_ops->residue(channel, dma);
+		ret = dma->d_ops->residue(chan, dma);
 
 	return ret;
 }
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index b653e9cfa3f..e7b8a6adaf7 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -20,16 +20,16 @@
 #include <asm/hardware/dec21285.h>
 
 #if 0
-static int fb_dma_request(dmach_t channel, dma_t *dma)
+static int fb_dma_request(unsigned int chan, dma_t *dma)
 {
 	return -EINVAL;
 }
 
-static void fb_dma_enable(dmach_t channel, dma_t *dma)
+static void fb_dma_enable(unsigned int chan, dma_t *dma)
 {
 }
 
-static void fb_dma_disable(dmach_t channel, dma_t *dma)
+static void fb_dma_disable(unsigned int chan, dma_t *dma)
 {
 }
 
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 7958a30f893..a86d3ed859a 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -125,18 +125,18 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int iomd_request_dma(dmach_t channel, dma_t *dma)
+static int iomd_request_dma(unsigned int chan, dma_t *dma)
 {
 	return request_irq(dma->dma_irq, iomd_dma_handle,
 			   IRQF_DISABLED, dma->device_id, dma);
 }
 
-static void iomd_free_dma(dmach_t channel, dma_t *dma)
+static void iomd_free_dma(unsigned int chan, dma_t *dma)
 {
 	free_irq(dma->dma_irq, dma);
 }
 
-static void iomd_enable_dma(dmach_t channel, dma_t *dma)
+static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 {
 	unsigned long dma_base = dma->dma_base;
 	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
@@ -169,7 +169,7 @@ static void iomd_enable_dma(dmach_t channel, dma_t *dma)
 	enable_irq(dma->dma_irq);
 }
 
-static void iomd_disable_dma(dmach_t channel, dma_t *dma)
+static void iomd_disable_dma(unsigned int chan, dma_t *dma)
 {
 	unsigned long dma_base = dma->dma_base;
 	unsigned long flags;
@@ -181,7 +181,7 @@ static void iomd_disable_dma(dmach_t channel, dma_t *dma)
 	local_irq_restore(flags);
 }
 
-static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
+static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
 {
 	int tcr, speed;
 
@@ -197,7 +197,7 @@ static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
 	tcr = iomd_readb(IOMD_DMATCR);
 	speed &= 3;
 
-	switch (channel) {
+	switch (chan) {
 	case DMA_0:
 		tcr = (tcr & ~0x03) | speed;
 		break;
@@ -236,7 +236,7 @@ static struct fiq_handler fh = {
 	.name	= "floppydma"
 };
 
-static void floppy_enable_dma(dmach_t channel, dma_t *dma)
+static void floppy_enable_dma(unsigned int chan, dma_t *dma)
 {
 	void *fiqhandler_start;
 	unsigned int fiqhandler_length;
@@ -269,13 +269,13 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
 	enable_fiq(dma->dma_irq);
 }
 
-static void floppy_disable_dma(dmach_t channel, dma_t *dma)
+static void floppy_disable_dma(unsigned int chan, dma_t *dma)
 {
 	disable_fiq(dma->dma_irq);
 	release_fiq(&fh);
 }
 
-static int floppy_get_residue(dmach_t channel, dma_t *dma)
+static int floppy_get_residue(unsigned int chan, dma_t *dma)
 {
 	struct pt_regs regs;
 	get_fiq_regs(&regs);
@@ -292,7 +292,7 @@ static struct dma_ops floppy_dma_ops = {
 /*
  * This is virtual DMA - we don't need anything here.
  */
-static void sound_enable_disable_dma(dmach_t channel, dma_t *dma)
+static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
 {
 }
 
-- 
cgit v1.2.3


From 3afb6e9c635f735c751148beddc195daec0e35ec Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 8 Dec 2008 16:08:48 +0000
Subject: [ARM] dma: factor out code looking up the DMA channel

This is a preparitory patch to allow us to easily change the way we
add and lookup DMA channel structures.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/dma.c | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index c31bf00e5ba..0ffea3fc22d 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -25,6 +25,16 @@ EXPORT_SYMBOL(dma_spin_lock);
 
 static dma_t dma_chan[MAX_DMA_CHANNELS];
 
+static inline dma_t *dma_channel(unsigned int chan)
+{
+	dma_t *dma = dma_chan + chan;
+
+	if (chan >= MAX_DMA_CHANNELS || !dma->d_ops)
+		return NULL;
+
+	return dma;
+}
+
 /*
  * Request DMA channel
  *
@@ -32,10 +42,10 @@ static dma_t dma_chan[MAX_DMA_CHANNELS];
  */
 int request_dma(unsigned int chan, const char *device_id)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 	int ret;
 
-	if (chan >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (!dma)
 		goto bad_dma;
 
 	if (xchg(&dma->lock, 1) != 0)
@@ -70,9 +80,9 @@ EXPORT_SYMBOL(request_dma);
  */
 void free_dma(unsigned int chan)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
-	if (chan >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (!dma)
 		goto bad_dma;
 
 	if (dma->active) {
@@ -99,7 +109,7 @@ EXPORT_SYMBOL(free_dma);
  */
 void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA SG while "
@@ -117,7 +127,7 @@ EXPORT_SYMBOL(set_dma_sg);
  */
 void __set_dma_addr (unsigned int chan, void *addr)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA address while "
@@ -135,7 +145,7 @@ EXPORT_SYMBOL(__set_dma_addr);
  */
 void set_dma_count (unsigned int chan, unsigned long count)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA count while "
@@ -151,7 +161,7 @@ EXPORT_SYMBOL(set_dma_count);
  */
 void set_dma_mode (unsigned int chan, dmamode_t mode)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
 	if (dma->active)
 		printk(KERN_ERR "dma%d: altering DMA mode while "
@@ -166,7 +176,7 @@ EXPORT_SYMBOL(set_dma_mode);
  */
 void enable_dma (unsigned int chan)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
 	if (!dma->lock)
 		goto free_dma;
@@ -187,7 +197,7 @@ EXPORT_SYMBOL(enable_dma);
  */
 void disable_dma (unsigned int chan)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 
 	if (!dma->lock)
 		goto free_dma;
@@ -209,7 +219,8 @@ EXPORT_SYMBOL(disable_dma);
  */
 int dma_channel_active(unsigned int chan)
 {
-	return dma_chan[chan].active;
+	dma_t *dma = dma_channel(chan);
+	return dma->active;
 }
 EXPORT_SYMBOL(dma_channel_active);
 
@@ -221,7 +232,7 @@ EXPORT_SYMBOL(set_dma_page);
 
 void set_dma_speed(unsigned int chan, int cycle_ns)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 	int ret = 0;
 
 	if (dma->d_ops->setspeed)
@@ -232,7 +243,7 @@ EXPORT_SYMBOL(set_dma_speed);
 
 int get_dma_residue(unsigned int chan)
 {
-	dma_t *dma = dma_chan + chan;
+	dma_t *dma = dma_channel(chan);
 	int ret = 0;
 
 	if (dma->d_ops->residue)
@@ -247,5 +258,4 @@ static int __init init_dma(void)
 	arch_dma_init(dma_chan);
 	return 0;
 }
-
 core_initcall(init_dma);
-- 
cgit v1.2.3


From 2f757f2ab7411cf0e2779012d8cda0cbf2f80d26 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 8 Dec 2008 16:33:30 +0000
Subject: [ARM] dma: rejig DMA initialization

Rather than having the central DMA multiplexer call the architecture
specific DMA initialization function, have each architecture DMA
initialization function use core_initcall(), and register each DMA
channel separately with the multiplexer.

This removes the array of dma structures in the central multiplexer,
replacing it with an array of pointers instead; this is more flexible
since it allows the drivers to wrap the DMA structure (eventually
allowing us to transition non-ISA DMA drivers away.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/dma.h | 12 +++++---
 arch/arm/kernel/dma-isa.c       | 18 +++++++++--
 arch/arm/kernel/dma.c           | 25 +++++++--------
 arch/arm/mach-footbridge/dma.c  |  6 ++--
 arch/arm/mach-rpc/dma.c         | 68 +++++++++++++++++++++++++++--------------
 arch/arm/mach-shark/dma.c       |  6 ++--
 6 files changed, 88 insertions(+), 47 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 281ae7e40a9..38a3693f125 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -48,10 +48,12 @@ struct dma_struct {
 	struct dma_ops	*d_ops;
 };
 
-/* Prototype: void arch_dma_init(dma)
- * Purpose  : Initialise architecture specific DMA
- * Params   : dma - pointer to array of DMA structures
+/*
+ * isa_dma_add - add an ISA-style DMA channel
  */
-extern void arch_dma_init(dma_t *dma);
+extern int isa_dma_add(unsigned int, dma_t *dma);
 
-extern void isa_init_dma(dma_t *dma);
+/*
+ * Add the ISA DMA controller.  Always takes channels 0-7.
+ */
+extern void isa_init_dma(void);
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 29eca48925d..da02a7ff341 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -160,7 +160,12 @@ static struct resource dma_resources[] = { {
 	.end	= 0x048f
 } };
 
-void __init isa_init_dma(dma_t *dma)
+static dma_t isa_dma[8];
+
+/*
+ * ISA DMA always starts at channel 0
+ */
+void __init isa_init_dma(void)
 {
 	/*
 	 * Try to autodetect presence of an ISA DMA controller.
@@ -178,10 +183,10 @@ void __init isa_init_dma(dma_t *dma)
 	outb(0xaa, 0x00);
 
 	if (inb(0) == 0x55 && inb(0) == 0xaa) {
-		int chan, i;
+		unsigned int chan, i;
 
 		for (chan = 0; chan < 8; chan++) {
-			dma[chan].d_ops = &isa_dma_ops;
+			isa_dma[chan].d_ops = &isa_dma_ops;
 			isa_disable_dma(chan, NULL);
 		}
 
@@ -217,5 +222,12 @@ void __init isa_init_dma(dma_t *dma)
 
 		for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
 			request_resource(&ioport_resource, dma_resources + i);
+
+		for (chan = 0; chan < 8; chan++) {
+			int ret = isa_dma_add(chan, &isa_dma[chan]);
+			if (ret)
+				printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
+					chan, ret);
+		}
 	}
 }
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index 0ffea3fc22d..aab24f03ea1 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -23,16 +23,24 @@
 DEFINE_SPINLOCK(dma_spin_lock);
 EXPORT_SYMBOL(dma_spin_lock);
 
-static dma_t dma_chan[MAX_DMA_CHANNELS];
+static dma_t *dma_chan[MAX_DMA_CHANNELS];
 
 static inline dma_t *dma_channel(unsigned int chan)
 {
-	dma_t *dma = dma_chan + chan;
-
-	if (chan >= MAX_DMA_CHANNELS || !dma->d_ops)
+	if (chan >= MAX_DMA_CHANNELS)
 		return NULL;
 
-	return dma;
+	return dma_chan[chan];
+}
+
+int __init isa_dma_add(unsigned int chan, dma_t *dma)
+{
+	if (!dma->d_ops)
+		return -EINVAL;
+	if (dma_chan[chan])
+		return -EBUSY;
+	dma_chan[chan] = dma;
+	return 0;
 }
 
 /*
@@ -252,10 +260,3 @@ int get_dma_residue(unsigned int chan)
 	return ret;
 }
 EXPORT_SYMBOL(get_dma_residue);
-
-static int __init init_dma(void)
-{
-	arch_dma_init(dma_chan);
-	return 0;
-}
-core_initcall(init_dma);
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index e7b8a6adaf7..fdd94b182d7 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -41,7 +41,7 @@ static struct dma_ops fb_dma_ops = {
 };
 #endif
 
-void __init arch_dma_init(dma_t *dma)
+static int __init fb_dma_init(void)
 {
 #if 0
 	dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
@@ -49,6 +49,8 @@ void __init arch_dma_init(dma_t *dma)
 #endif
 #ifdef CONFIG_ISA_DMA
 	if (footbridge_cfn_mode())
-		isa_init_dma(dma + _ISA_DMA(0));
+		isa_init_dma();
 #endif
+	return 0;
 }
+core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index a86d3ed859a..efcf6718d1d 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -302,8 +302,22 @@ static struct dma_ops sound_dma_ops = {
 	.disable	= sound_enable_disable_dma,
 };
 
-void __init arch_dma_init(dma_t *dma)
+static dma_t iomd_dma[6];
+
+static dma_t floppy_dma = {
+	.dma_irq	= FIQ_FLOPPYDATA,
+	.d_ops		= &floppy_dma_ops,
+};
+
+static dma_t sound_dma = {
+	.d_ops		= &sound_dma_ops,
+};
+
+static int __init rpc_dma_init(void)
 {
+	unsigned int i;
+	int ret;
+
 	iomd_writeb(0, IOMD_IO0CR);
 	iomd_writeb(0, IOMD_IO1CR);
 	iomd_writeb(0, IOMD_IO2CR);
@@ -311,31 +325,39 @@ void __init arch_dma_init(dma_t *dma)
 
 	iomd_writeb(0xa0, IOMD_DMATCR);
 
-	dma[DMA_0].dma_base		= IOMD_IO0CURA;
-	dma[DMA_0].dma_irq		= IRQ_DMA0;
-	dma[DMA_0].d_ops		= &iomd_dma_ops;
-	dma[DMA_1].dma_base		= IOMD_IO1CURA;
-	dma[DMA_1].dma_irq		= IRQ_DMA1;
-	dma[DMA_1].d_ops		= &iomd_dma_ops;
-	dma[DMA_2].dma_base		= IOMD_IO2CURA;
-	dma[DMA_2].dma_irq		= IRQ_DMA2;
-	dma[DMA_2].d_ops		= &iomd_dma_ops;
-	dma[DMA_3].dma_base		= IOMD_IO3CURA;
-	dma[DMA_3].dma_irq		= IRQ_DMA3;
-	dma[DMA_3].d_ops		= &iomd_dma_ops;
-	dma[DMA_S0].dma_base		= IOMD_SD0CURA;
-	dma[DMA_S0].dma_irq		= IRQ_DMAS0;
-	dma[DMA_S0].d_ops		= &iomd_dma_ops;
-	dma[DMA_S1].dma_base		= IOMD_SD1CURA;
-	dma[DMA_S1].dma_irq		= IRQ_DMAS1;
-	dma[DMA_S1].d_ops		= &iomd_dma_ops;
-	dma[DMA_VIRTUAL_FLOPPY].dma_irq	= FIQ_FLOPPYDATA;
-	dma[DMA_VIRTUAL_FLOPPY].d_ops	= &floppy_dma_ops;
-	dma[DMA_VIRTUAL_SOUND].d_ops	= &sound_dma_ops;
-
 	/*
 	 * Setup DMA channels 2,3 to be for podules
 	 * and channels 0,1 for internal devices
 	 */
 	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
+
+	iomd_dma[DMA_0].dma_base	= IOMD_IO0CURA;
+	iomd_dma[DMA_0].dma_irq		= IRQ_DMA0;
+	iomd_dma[DMA_1].dma_base	= IOMD_IO1CURA;
+	iomd_dma[DMA_1].dma_irq		= IRQ_DMA1;
+	iomd_dma[DMA_2].dma_base	= IOMD_IO2CURA;
+	iomd_dma[DMA_2].dma_irq		= IRQ_DMA2;
+	iomd_dma[DMA_3].dma_base	= IOMD_IO3CURA;
+	iomd_dma[DMA_3].dma_irq		= IRQ_DMA3;
+	iomd_dma[DMA_S0].dma_base	= IOMD_SD0CURA;
+	iomd_dma[DMA_S0].dma_irq	= IRQ_DMAS0;
+	iomd_dma[DMA_S1].dma_base	= IOMD_SD1CURA;
+	iomd_dma[DMA_S1].dma_irq	= IRQ_DMAS1;
+
+	for (i = DMA_0; i <= DMA_S1; i++) {
+		iomd_dma[i].d_ops = &iomd_dma_ops;
+
+		ret = isa_dma_add(i, &iomd_dma[i]);
+		if (ret)
+			printk("IOMDDMA%u: unable to register: %d\n", i, ret);
+	}
+
+	ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma);
+	if (ret)
+		printk("IOMDFLOPPY: unable to register: %d\n", ret);
+	ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
+	if (ret)
+		printk("IOMDSOUND: unable to register: %d\n", ret);
+	return 0;
 }
+core_initcall(rpc_dma_init);
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
index 6774b8d5d13..10b5b8b3272 100644
--- a/arch/arm/mach-shark/dma.c
+++ b/arch/arm/mach-shark/dma.c
@@ -13,9 +13,11 @@
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
 
-void __init arch_dma_init(dma_t *dma)
+static int __init shark_dma_init(void)
 {
 #ifdef CONFIG_ISA_DMA
-	isa_init_dma(dma);
+	isa_init_dma();
 #endif
+	return 0;
 }
+core_initcall(shark_dma_init);
-- 
cgit v1.2.3


From ad9dd94c384f7ee37b798a9349b8c42da8fa99ab Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 8 Dec 2008 17:35:48 +0000
Subject: [ARM] dma: move RiscPC specific DMA data out of dma_struct

Separate the RiscPC specific (IOMD and floppy FIQ) data out of the core
DMA structure by making the IOMD and floppy DMA supersets.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/dma.h |  18 +++--
 arch/arm/mach-rpc/dma.c         | 146 +++++++++++++++++++++-------------------
 2 files changed, 91 insertions(+), 73 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 38a3693f125..4326738ff36 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -40,14 +40,22 @@ struct dma_struct {
 	unsigned int	lock;		/* Device is allocated		*/
 	const char	*device_id;	/* Device name			*/
 
-	unsigned int	dma_base;	/* Controller base address	*/
-	int		dma_irq;	/* Controller IRQ		*/
-	struct scatterlist cur_sg;	/* Current controller buffer	*/
-	unsigned int	state;
-
 	struct dma_ops	*d_ops;
 };
 
+struct floppy_dma {
+	struct dma_struct	dma;
+	unsigned int		fiq;
+};
+
+struct iomd_dma {
+	struct dma_struct	dma;
+	unsigned int		state;
+	unsigned long		base;		/* Controller base address */
+	int			irq;		/* Controller IRQ */
+	struct scatterlist	cur_sg;		/* Current controller buffer */
+};
+
 /*
  * isa_dma_add - add an ISA-style DMA channel
  */
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index efcf6718d1d..0163592b2af 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -44,15 +44,15 @@ typedef enum {
 #define CR	(IOMD_IO0CR - IOMD_IO0CURA)
 #define ST	(IOMD_IO0ST - IOMD_IO0CURA)
 
-static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
+static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 {
 	unsigned long end, offset, flags = 0;
 
-	if (dma->sg) {
-		sg->dma_address = dma->sg->dma_address;
+	if (idma->dma.sg) {
+		sg->dma_address = idma->dma.sg->dma_address;
 		offset = sg->dma_address & ~PAGE_MASK;
 
-		end = offset + dma->sg->length;
+		end = offset + idma->dma.sg->length;
 
 		if (end > PAGE_SIZE)
 			end = PAGE_SIZE;
@@ -62,15 +62,15 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
 
 		sg->length = end - TRANSFER_SIZE;
 
-		dma->sg->length -= end - offset;
-		dma->sg->dma_address += end - offset;
+		idma->dma.sg->length -= end - offset;
+		idma->dma.sg->dma_address += end - offset;
 
-		if (dma->sg->length == 0) {
-			if (dma->sgcount > 1) {
-				dma->sg++;
-				dma->sgcount--;
+		if (idma->dma.sg->length == 0) {
+			if (idma->dma.sgcount > 1) {
+				idma->dma.sg++;
+				idma->dma.sgcount--;
 			} else {
-				dma->sg = NULL;
+				idma->dma.sg = NULL;
 				flags |= DMA_END_S;
 			}
 		}
@@ -85,8 +85,8 @@ static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
 
 static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 {
-	dma_t *dma = (dma_t *)dev_id;
-	unsigned long base = dma->dma_base;
+	struct iomd_dma *idma = dev_id;
+	unsigned long base = idma->base;
 
 	do {
 		unsigned int status;
@@ -95,31 +95,31 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 		if (!(status & DMA_ST_INT))
 			return IRQ_HANDLED;
 
-		if ((dma->state ^ status) & DMA_ST_AB)
-			iomd_get_next_sg(&dma->cur_sg, dma);
+		if ((idma->state ^ status) & DMA_ST_AB)
+			iomd_get_next_sg(&idma->cur_sg, idma);
 
 		switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
 		case DMA_ST_OFL:			/* OIA */
 		case DMA_ST_AB:				/* .IB */
-			iomd_writel(dma->cur_sg.dma_address, base + CURA);
-			iomd_writel(dma->cur_sg.length, base + ENDA);
-			dma->state = DMA_ST_AB;
+			iomd_writel(idma->cur_sg.dma_address, base + CURA);
+			iomd_writel(idma->cur_sg.length, base + ENDA);
+			idma->state = DMA_ST_AB;
 			break;
 
 		case DMA_ST_OFL | DMA_ST_AB:		/* OIB */
 		case 0:					/* .IA */
-			iomd_writel(dma->cur_sg.dma_address, base + CURB);
-			iomd_writel(dma->cur_sg.length, base + ENDB);
-			dma->state = 0;
+			iomd_writel(idma->cur_sg.dma_address, base + CURB);
+			iomd_writel(idma->cur_sg.length, base + ENDB);
+			idma->state = 0;
 			break;
 		}
 
 		if (status & DMA_ST_OFL &&
-		    dma->cur_sg.length == (DMA_END_S|DMA_END_L))
+		    idma->cur_sg.length == (DMA_END_S|DMA_END_L))
 			break;
 	} while (1);
 
-	dma->state = ~DMA_ST_AB;
+	idma->state = ~DMA_ST_AB;
 	disable_irq(irq);
 
 	return IRQ_HANDLED;
@@ -127,56 +127,62 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 
 static int iomd_request_dma(unsigned int chan, dma_t *dma)
 {
-	return request_irq(dma->dma_irq, iomd_dma_handle,
-			   IRQF_DISABLED, dma->device_id, dma);
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+	return request_irq(idma->irq, iomd_dma_handle,
+			   IRQF_DISABLED, idma->dma.device_id, idma);
 }
 
 static void iomd_free_dma(unsigned int chan, dma_t *dma)
 {
-	free_irq(dma->dma_irq, dma);
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+	free_irq(idma->irq, idma);
 }
 
 static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 {
-	unsigned long dma_base = dma->dma_base;
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+	unsigned long dma_base = idma->base;
 	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
 
-	if (dma->invalid) {
-		dma->invalid = 0;
+	if (idma->dma.invalid) {
+		idma->dma.invalid = 0;
 
 		/*
 		 * Cope with ISA-style drivers which expect cache
 		 * coherence.
 		 */
-		if (!dma->sg) {
-			dma->sg = &dma->buf;
-			dma->sgcount = 1;
-			dma->buf.length = dma->count;
-			dma->buf.dma_address = dma_map_single(NULL,
-				dma->addr, dma->count,
-				dma->dma_mode == DMA_MODE_READ ?
+		if (!idma->dma.sg) {
+			idma->dma.sg = &idma->dma.buf;
+			idma->dma.sgcount = 1;
+			idma->dma.buf.length = idma->dma.count;
+			idma->dma.buf.dma_address = dma_map_single(NULL,
+				idma->dma.addr, idma->dma.count,
+				idma->dma.dma_mode == DMA_MODE_READ ?
 				DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 
 		iomd_writeb(DMA_CR_C, dma_base + CR);
-		dma->state = DMA_ST_AB;
+		idma->state = DMA_ST_AB;
 	}
-		
-	if (dma->dma_mode == DMA_MODE_READ)
+
+	if (idma->dma.dma_mode == DMA_MODE_READ)
 		ctrl |= DMA_CR_D;
 
 	iomd_writeb(ctrl, dma_base + CR);
-	enable_irq(dma->dma_irq);
+	enable_irq(idma->irq);
 }
 
 static void iomd_disable_dma(unsigned int chan, dma_t *dma)
 {
-	unsigned long dma_base = dma->dma_base;
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+	unsigned long dma_base = idma->base;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (dma->state != ~DMA_ST_AB)
-		disable_irq(dma->dma_irq);
+	if (idma->state != ~DMA_ST_AB)
+		disable_irq(idma->irq);
 	iomd_writeb(0, dma_base + CR);
 	local_irq_restore(flags);
 }
@@ -238,14 +244,15 @@ static struct fiq_handler fh = {
 
 static void floppy_enable_dma(unsigned int chan, dma_t *dma)
 {
+	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
 	void *fiqhandler_start;
 	unsigned int fiqhandler_length;
 	struct pt_regs regs;
 
-	if (dma->sg)
+	if (fdma->dma.sg)
 		BUG();
 
-	if (dma->dma_mode == DMA_MODE_READ) {
+	if (fdma->dma.dma_mode == DMA_MODE_READ) {
 		extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
 		fiqhandler_start = &floppy_fiqin_start;
 		fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
@@ -255,8 +262,8 @@ static void floppy_enable_dma(unsigned int chan, dma_t *dma)
 		fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
 	}
 
-	regs.ARM_r9  = dma->count;
-	regs.ARM_r10 = (unsigned long)dma->addr;
+	regs.ARM_r9  = fdma->dma.count;
+	regs.ARM_r10 = (unsigned long)fdma->dma.addr;
 	regs.ARM_fp  = (unsigned long)FLOPPYDMA_BASE;
 
 	if (claim_fiq(&fh)) {
@@ -266,12 +273,13 @@ static void floppy_enable_dma(unsigned int chan, dma_t *dma)
 
 	set_fiq_handler(fiqhandler_start, fiqhandler_length);
 	set_fiq_regs(&regs);
-	enable_fiq(dma->dma_irq);
+	enable_fiq(fdma->fiq);
 }
 
 static void floppy_disable_dma(unsigned int chan, dma_t *dma)
 {
-	disable_fiq(dma->dma_irq);
+	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+	disable_fiq(fdma->fiq);
 	release_fiq(&fh);
 }
 
@@ -302,11 +310,13 @@ static struct dma_ops sound_dma_ops = {
 	.disable	= sound_enable_disable_dma,
 };
 
-static dma_t iomd_dma[6];
+static struct iomd_dma iomd_dma[6];
 
-static dma_t floppy_dma = {
-	.dma_irq	= FIQ_FLOPPYDATA,
-	.d_ops		= &floppy_dma_ops,
+static struct floppy_dma floppy_dma = {
+	.dma		= {
+		.d_ops	= &floppy_dma_ops,
+	},
+	.fiq		= FIQ_FLOPPYDATA,
 };
 
 static dma_t sound_dma = {
@@ -331,28 +341,28 @@ static int __init rpc_dma_init(void)
 	 */
 	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
 
-	iomd_dma[DMA_0].dma_base	= IOMD_IO0CURA;
-	iomd_dma[DMA_0].dma_irq		= IRQ_DMA0;
-	iomd_dma[DMA_1].dma_base	= IOMD_IO1CURA;
-	iomd_dma[DMA_1].dma_irq		= IRQ_DMA1;
-	iomd_dma[DMA_2].dma_base	= IOMD_IO2CURA;
-	iomd_dma[DMA_2].dma_irq		= IRQ_DMA2;
-	iomd_dma[DMA_3].dma_base	= IOMD_IO3CURA;
-	iomd_dma[DMA_3].dma_irq		= IRQ_DMA3;
-	iomd_dma[DMA_S0].dma_base	= IOMD_SD0CURA;
-	iomd_dma[DMA_S0].dma_irq	= IRQ_DMAS0;
-	iomd_dma[DMA_S1].dma_base	= IOMD_SD1CURA;
-	iomd_dma[DMA_S1].dma_irq	= IRQ_DMAS1;
+	iomd_dma[DMA_0].base	= IOMD_IO0CURA;
+	iomd_dma[DMA_0].irq	= IRQ_DMA0;
+	iomd_dma[DMA_1].base	= IOMD_IO1CURA;
+	iomd_dma[DMA_1].irq	= IRQ_DMA1;
+	iomd_dma[DMA_2].base	= IOMD_IO2CURA;
+	iomd_dma[DMA_2].irq	= IRQ_DMA2;
+	iomd_dma[DMA_3].base	= IOMD_IO3CURA;
+	iomd_dma[DMA_3].irq	= IRQ_DMA3;
+	iomd_dma[DMA_S0].base	= IOMD_SD0CURA;
+	iomd_dma[DMA_S0].irq	= IRQ_DMAS0;
+	iomd_dma[DMA_S1].base	= IOMD_SD1CURA;
+	iomd_dma[DMA_S1].irq	= IRQ_DMAS1;
 
 	for (i = DMA_0; i <= DMA_S1; i++) {
-		iomd_dma[i].d_ops = &iomd_dma_ops;
+		iomd_dma[i].dma.d_ops = &iomd_dma_ops;
 
-		ret = isa_dma_add(i, &iomd_dma[i]);
+		ret = isa_dma_add(i, &iomd_dma[i].dma);
 		if (ret)
 			printk("IOMDDMA%u: unable to register: %d\n", i, ret);
 	}
 
-	ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma);
+	ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
 	if (ret)
 		printk("IOMDFLOPPY: unable to register: %d\n", ret);
 	ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
-- 
cgit v1.2.3


From 8c56afcbea22e472d3bfa8ddf06f23cd6bc56826 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 11 Dec 2008 14:50:39 +0000
Subject: [ARM] dma: constify dma controller name and dma ops

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/dma.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 4326738ff36..3122adae80b 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -21,7 +21,7 @@ struct dma_ops {
 	void 	(*disable)(unsigned int, dma_t *);		/* mandatory */
 	int	(*residue)(unsigned int, dma_t *);		/* optional */
 	int	(*setspeed)(unsigned int, dma_t *, int);	/* optional */
-	char	*type;
+	const char *type;
 };
 
 struct dma_struct {
@@ -40,7 +40,7 @@ struct dma_struct {
 	unsigned int	lock;		/* Device is allocated		*/
 	const char	*device_id;	/* Device name			*/
 
-	struct dma_ops	*d_ops;
+	const struct dma_ops *d_ops;
 };
 
 struct floppy_dma {
-- 
cgit v1.2.3


From d667522fdf637ef1b425518afe11aedba80364b2 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 8 Dec 2008 17:50:25 +0000
Subject: [ARM] dma: ensure that the single entry sg is properly initialized

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/dma.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index aab24f03ea1..e7828fcd954 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
+#include <linux/scatterlist.h>
 
 #include <asm/dma.h>
 
@@ -37,6 +38,9 @@ int __init isa_dma_add(unsigned int chan, dma_t *dma)
 {
 	if (!dma->d_ops)
 		return -EINVAL;
+
+	sg_init_table(&dma->buf, 1);
+
 	if (dma_chan[chan])
 		return -EBUSY;
 	dma_chan[chan] = dma;
-- 
cgit v1.2.3


From 9e28d7e8c5422a47db886c4104221ea165595de0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 8 Dec 2008 19:03:58 +0000
Subject: [ARM] dma: convert IOMD DMA to use sg_next()

... rather than incrementing the sg pointer.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-rpc/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 0163592b2af..a5987bbed60 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -67,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 
 		if (idma->dma.sg->length == 0) {
 			if (idma->dma.sgcount > 1) {
-				idma->dma.sg++;
+				idma->dma.sg = sg_next(idma->dma.sg);
 				idma->dma.sgcount--;
 			} else {
 				idma->dma.sg = NULL;
-- 
cgit v1.2.3


From 5369bea7d7db1d95f63907f3470e23d32930be98 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 11 Dec 2008 16:37:06 +0000
Subject: [ARM] dma: Use sensible DMA parameters for Acorn drivers

The hardware supports transfers up to a page boundary per buffer.
Currently, we work around that in the DMA code by splitting each
buffer up as we run through the scatterlist.  Avoid this by telling
the block layers about the hardware restriction.

Eventually, this will allow us to phase out the splitting code,
but not until the old IDE layer allows us to control the value it
gives to blk_queue_segment_boundary().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-rpc/include/mach/isa-dma.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
index bad72054858..67bfc6719c3 100644
--- a/arch/arm/mach-rpc/include/mach/isa-dma.h
+++ b/arch/arm/mach-rpc/include/mach/isa-dma.h
@@ -23,5 +23,7 @@
 
 #define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
 
+#define IOMD_DMA_BOUNDARY	(PAGE_SIZE - 1)
+
 #endif /* _ASM_ARCH_DMA_H */
 
-- 
cgit v1.2.3


From bc6447b8e4fdb3306ee6381df9650a1a8aa57c5b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 2 Jan 2009 12:18:53 +0000
Subject: [ARM] dma: make DMA_MODE_xxx reflect ISA DMA settings

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/dma.h | 13 ++++++++-----
 arch/arm/kernel/dma-isa.c  | 13 +------------
 2 files changed, 9 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index c5557a650d1..59f59c6c79f 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -26,12 +26,15 @@
  */
 typedef unsigned int dmamode_t;
 
-#define DMA_MODE_MASK	3
+/*
+ * The DMA modes reflect the settings for the ISA DMA controller
+ */
+#define DMA_MODE_MASK	 0xcc
 
-#define DMA_MODE_READ	 0
-#define DMA_MODE_WRITE	 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT	 4
+#define DMA_MODE_READ	 0x44
+#define DMA_MODE_WRITE	 0x48
+#define DMA_MODE_CASCADE 0xc0
+#define DMA_AUTOINIT	 0x10
 
 extern spinlock_t  dma_spin_lock;
 
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index da02a7ff341..0e88e46fc73 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -24,11 +24,6 @@
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
 
-#define ISA_DMA_MODE_READ	0x44
-#define ISA_DMA_MODE_WRITE	0x48
-#define ISA_DMA_MODE_CASCADE	0xc0
-#define ISA_DMA_AUTOINIT	0x10
-
 #define ISA_DMA_MASK		0
 #define ISA_DMA_MODE		1
 #define ISA_DMA_CLRFF		2
@@ -67,20 +62,17 @@ static void isa_enable_dma(unsigned int chan, dma_t *dma)
 		unsigned int mode;
 		enum dma_data_direction direction;
 
-		mode = chan & 3;
+		mode = (chan & 3) | dma->dma_mode;
 		switch (dma->dma_mode & DMA_MODE_MASK) {
 		case DMA_MODE_READ:
-			mode |= ISA_DMA_MODE_READ;
 			direction = DMA_FROM_DEVICE;
 			break;
 
 		case DMA_MODE_WRITE:
-			mode |= ISA_DMA_MODE_WRITE;
 			direction = DMA_TO_DEVICE;
 			break;
 
 		case DMA_MODE_CASCADE:
-			mode |= ISA_DMA_MODE_CASCADE;
 			direction = DMA_BIDIRECTIONAL;
 			break;
 
@@ -121,9 +113,6 @@ static void isa_enable_dma(unsigned int chan, dma_t *dma)
 		outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
 		outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
 
-		if (dma->dma_mode & DMA_AUTOINIT)
-			mode |= ISA_DMA_AUTOINIT;
-
 		outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
 		dma->invalid = 0;
 	}
-- 
cgit v1.2.3


From 4e57ea9a2e8e807e20f64d5b53fbee2c7c9e87ae Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 2 Jan 2009 12:34:31 +0000
Subject: [ARM] dma: remove usage of dmamode_t from MXC platform support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-mxc/dma-mx1-mx2.c              | 6 +++---
 arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 21427434444..92bc4f6bd01 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -114,7 +114,7 @@ struct imx_dma_channel {
 	void (*err_handler) (int, void *, int errcode);
 	void (*prog_handler) (int, void *, struct scatterlist *);
 	void *data;
-	dmamode_t  dma_mode;
+	unsigned int dma_mode;
 	struct scatterlist *sg;
 	unsigned int resbytes;
 	int dma_num;
@@ -193,7 +193,7 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 int
 imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		     unsigned int dma_length, unsigned int dev_addr,
-		     dmamode_t dmamode)
+		     unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 
@@ -288,7 +288,7 @@ int
 imx_dma_setup_sg(int channel,
 		 struct scatterlist *sg, unsigned int sgcount,
 		 unsigned int dma_length, unsigned int dev_addr,
-		 dmamode_t dmamode)
+		 unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index 6cc6f0c8cb2..c162920b13a 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -54,12 +54,12 @@ imx_dma_config_burstlen(int channel, unsigned int burstlen);
 int
 imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		unsigned int dma_length, unsigned int dev_addr,
-		dmamode_t dmamode);
+		unsigned int dmamode);
 
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,
-		unsigned int dev_addr, dmamode_t dmamode);
+		unsigned int dev_addr, unsigned int dmamode);
 
 int
 imx_dma_setup_handlers(int channel,
-- 
cgit v1.2.3


From f0ffc816250a8cc28e6824326e2d58333e058eca Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 2 Jan 2009 12:34:55 +0000
Subject: [ARM] dma: remove dmamode_t typedef

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/dma.h      | 7 +------
 arch/arm/include/asm/mach/dma.h | 2 +-
 arch/arm/kernel/dma.c           | 2 +-
 3 files changed, 3 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 59f59c6c79f..7edf3536df2 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -21,11 +21,6 @@
 
 #include <mach/isa-dma.h>
 
-/*
- * DMA modes
- */
-typedef unsigned int dmamode_t;
-
 /*
  * The DMA modes reflect the settings for the ISA DMA controller
  */
@@ -125,7 +120,7 @@ extern void set_dma_count(unsigned int chan, unsigned long count);
  * DMA transfer direction immediately, but defer it to the
  * enable_dma().
  */
-extern void set_dma_mode(unsigned int chan, dmamode_t mode);
+extern void set_dma_mode(unsigned int chan, unsigned int mode);
 
 /* Set the transfer speed for this channel
  */
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 3122adae80b..5166145d8a3 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -34,7 +34,7 @@ struct dma_struct {
 	unsigned int	active:1;	/* Transfer active		*/
 	unsigned int	invalid:1;	/* Address/Count changed	*/
 
-	dmamode_t	dma_mode;	/* DMA mode			*/
+	unsigned int	dma_mode;	/* DMA mode			*/
 	int		speed;		/* DMA speed			*/
 
 	unsigned int	lock;		/* Device is allocated		*/
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index e7828fcd954..7d5b9fb01e7 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -171,7 +171,7 @@ EXPORT_SYMBOL(set_dma_count);
 
 /* Set DMA direction mode
  */
-void set_dma_mode (unsigned int chan, dmamode_t mode)
+void set_dma_mode (unsigned int chan, unsigned int mode)
 {
 	dma_t *dma = dma_channel(chan);
 
-- 
cgit v1.2.3


From ae03c49964af5033534e518eebe439c3b90f43a7 Mon Sep 17 00:00:00 2001
From: Alain Knaff <alain@knaff.lu>
Date: Sun, 4 Jan 2009 22:46:17 +0100
Subject: bzip2/lzma: x86 kernel compression support

Impact: Replaces x86 kernel decompressor with new code

This is the third part of the bzip2/lzma patch

The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip.  Lzma's decompresses faster
than bzip2.

It also supports ramdisks and initramfs' compressed using these two
compressors.

The functionality has been successfully used for a couple of years by
the udpcast project

This version applies to "tip" kernel 2.6.28

This part contains:
- support for new bzip2 and lzma kernel compression for x86

Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/compressed/Makefile |  21 ++++++-
 arch/x86/boot/compressed/misc.c   | 118 +++++---------------------------------
 arch/x86/include/asm/boot.h       |  12 +++-
 3 files changed, 44 insertions(+), 107 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 1771c804e02..3ca4c194b8e 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -47,18 +47,35 @@ ifeq ($(CONFIG_X86_32),y)
 ifdef CONFIG_RELOCATABLE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
 	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
+	$(call if_changed,lzma)
 else
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
 endif
 LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
 
 else
+
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
 
 LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
 endif
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+suffix_$(CONFIG_KERNEL_GZIP)  = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
 	$(call if_changed,ld)
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index da062216948..e45be73684f 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -116,71 +116,13 @@
 /*
  * gzip declarations
  */
-
-#define OF(args)	args
 #define STATIC		static
 
 #undef memset
 #undef memcpy
 #define memzero(s, n)	memset((s), 0, (n))
 
-typedef unsigned char	uch;
-typedef unsigned short	ush;
-typedef unsigned long	ulg;
-
-/*
- * Window size must be at least 32k, and a power of two.
- * We don't actually have a window just a huge output buffer,
- * so we report a 2G window size, as that should always be
- * larger than our output buffer:
- */
-#define WSIZE		0x80000000
-
-/* Input buffer: */
-static unsigned char	*inbuf;
-
-/* Sliding window buffer (and final output buffer): */
-static unsigned char	*window;
-
-/* Valid bytes in inbuf: */
-static unsigned		insize;
-
-/* Index of next byte to be processed in inbuf: */
-static unsigned		inptr;
-
-/* Bytes in output buffer: */
-static unsigned		outcnt;
-
-/* gzip flag byte */
-#define ASCII_FLAG	0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION	0x02 /* bit 1 set: continuation of multi-part gz file */
-#define EXTRA_FIELD	0x04 /* bit 2 set: extra field present */
-#define ORIG_NAM	0x08 /* bit 3 set: original file name present */
-#define COMMENT		0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED	0x20 /* bit 5 set: file is encrypted */
-#define RESERVED	0xC0 /* bit 6, 7:  reserved */
-
-#define get_byte()	(inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0)
-#  define Trace(x)	do { fprintf x; } while (0)
-#  define Tracev(x)	do { if (verbose) fprintf x ; } while (0)
-#  define Tracevv(x)	do { if (verbose > 1) fprintf x ; } while (0)
-#  define Tracec(c, x)	do { if (verbose && (c)) fprintf x ; } while (0)
-#  define Tracecv(c, x)	do { if (verbose > 1 && (c)) fprintf x ; } while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
 
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 /*
@@ -189,13 +131,8 @@ static void error(char *m);
 static struct boot_params *real_mode;		/* Pointer to real-mode data */
 static int quiet;
 
-extern unsigned char input_data[];
-extern int input_len;
-
-static long bytes_out;
-
 static void *memset(void *s, int c, unsigned n);
-static void *memcpy(void *dest, const void *src, unsigned n);
+void *memcpy(void *dest, const void *src, unsigned n);
 
 static void __putstr(int, const char *);
 #define putstr(__x)  __putstr(0, __x)
@@ -213,7 +150,17 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#include "../../../../lib/inflate.c"
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
 
 static void scroll(void)
 {
@@ -282,7 +229,7 @@ static void *memset(void *s, int c, unsigned n)
 	return s;
 }
 
-static void *memcpy(void *dest, const void *src, unsigned n)
+void *memcpy(void *dest, const void *src, unsigned n)
 {
 	int i;
 	const char *s = src;
@@ -293,38 +240,6 @@ static void *memcpy(void *dest, const void *src, unsigned n)
 	return dest;
 }
 
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	error("ran out of input data");
-	return 0;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-	/* With my window equal to my output buffer
-	 * I only need to compute the crc here.
-	 */
-	unsigned long c = crc;         /* temporary variable */
-	unsigned n;
-	unsigned char *in, ch;
-
-	in = window;
-	for (n = 0; n < outcnt; n++) {
-		ch = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (unsigned long)outcnt;
-	outcnt = 0;
-}
 
 static void error(char *x)
 {
@@ -407,12 +322,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	lines = real_mode->screen_info.orig_video_lines;
 	cols = real_mode->screen_info.orig_video_cols;
 
-	window = output;		/* Output buffer (Normally at 1M) */
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
-	inbuf  = input_data;		/* Input buffer */
-	insize = input_len;
-	inptr  = 0;
 
 #ifdef CONFIG_X86_64
 	if ((unsigned long)output & (__KERNEL_ALIGN - 1))
@@ -430,10 +341,9 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 #endif
 #endif
 
-	makecrc();
 	if (!quiet)
 		putstr("\nDecompressing Linux... ");
-	gunzip();
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
 	parse_elf(output);
 	if (!quiet)
 		putstr("done.\nBooting the kernel.\n");
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index dd61616cb73..c0e8e68a31f 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -15,11 +15,21 @@
 				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
+#if (defined CONFIG_KERNEL_BZIP2)
+#define BOOT_HEAP_SIZE             0x400000
+#else
+
 #ifdef CONFIG_X86_64
 #define BOOT_HEAP_SIZE	0x7000
-#define BOOT_STACK_SIZE	0x4000
 #else
 #define BOOT_HEAP_SIZE	0x4000
+#endif
+
+#endif
+
+#ifdef CONFIG_X86_64
+#define BOOT_STACK_SIZE	0x4000
+#else
 #define BOOT_STACK_SIZE	0x1000
 #endif
 
-- 
cgit v1.2.3


From 2e9f3bddcbc711bb14d86c6f068a779bf3710247 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Sun, 4 Jan 2009 15:41:25 -0800
Subject: bzip2/lzma: make config machinery an arch configurable

Impact: Bug fix (we should not show this menu on irrelevant architectures)

Make the config machinery to drive the gzip/bzip2/lzma selection
dependent on the architecture advertising HAVE_KERNEL_* so that we
don't display this for architectures where it doesn't matter.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 862adb9bf0d..7b66c34d0aa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -39,6 +39,9 @@ config X86
 	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select USER_STACKTRACE_SUPPORT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 
 config ARCH_DEFCONFIG
 	string
-- 
cgit v1.2.3


From 7760ec77ab2a9e48bdd0d13341446a8a51f0b9f1 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 18:10:13 +0530
Subject: x86: smp.h remove obsolete function declaration

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/smp.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 830b9fcb642..83a4cc07431 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -22,7 +22,6 @@ extern cpumask_t cpu_callout_map;
 extern cpumask_t cpu_initialized;
 extern cpumask_t cpu_callin_map;
 
-extern void (*mtrr_hook)(void);
 extern void zap_low_mappings(void);
 
 extern int __cpuinit get_local_pda(int cpu);
-- 
cgit v1.2.3


From dacf7333571d770366bff74d10b56aa545434605 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 17:26:35 +0530
Subject: x86: smp.h move zap_low_mappings declartion to tlbflush.h

Impact: cleanup, moving NON-SMP stuff from smp.h

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/smp.h      | 2 --
 arch/x86/include/asm/tlbflush.h | 2 ++
 arch/x86/mm/init_32.c           | 1 -
 3 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 83a4cc07431..64c9e848f13 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -22,8 +22,6 @@ extern cpumask_t cpu_callout_map;
 extern cpumask_t cpu_initialized;
 extern cpumask_t cpu_callin_map;
 
-extern void zap_low_mappings(void);
-
 extern int __cpuinit get_local_pda(int cpu);
 
 extern int smp_num_siblings;
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 0e7bbb54911..aed0b700b83 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -175,4 +175,6 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 	flush_tlb_all();
 }
 
+extern void zap_low_mappings(void);
+
 #endif /* _ASM_X86_TLBFLUSH_H */
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index f99a6c6c432..a9dd0b7ad61 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -49,7 +49,6 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 #include <asm/cacheflush.h>
-#include <asm/smp.h>
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
-- 
cgit v1.2.3


From 6e5385d44b2df05e50a8d07ba0e14d3e32685237 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 18:11:35 +0530
Subject: x86: smp.h move prefill_possible_map declartion to cpu.h

Impact: cleanup, moving NON-SMP stuff from smp.h

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpu.h | 10 ++++++++++
 arch/x86/include/asm/smp.h |  6 ------
 arch/x86/kernel/setup.c    |  2 +-
 arch/x86/kernel/smpboot.c  |  1 -
 4 files changed, 11 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index bae482df603..29aa6d0752b 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -7,6 +7,16 @@
 #include <linux/nodemask.h>
 #include <linux/percpu.h>
 
+#ifdef CONFIG_SMP
+
+extern void prefill_possible_map(void);
+
+#else /* CONFIG_SMP */
+
+static inline void prefill_possible_map(void) {}
+
+#endif /* CONFIG_SMP */
+
 struct x86_cpu {
 	struct cpu cpu;
 };
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 64c9e848f13..62bd3f68269 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -138,8 +138,6 @@ void play_dead_common(void);
 void native_send_call_func_ipi(const struct cpumask *mask);
 void native_send_call_func_single_ipi(int cpu);
 
-extern void prefill_possible_map(void);
-
 void smp_store_cpu_info(int id);
 #define cpu_physical_id(cpu)	per_cpu(x86_cpu_to_apicid, cpu)
 
@@ -148,10 +146,6 @@ static inline int num_booting_cpus(void)
 {
 	return cpus_weight(cpu_callout_map);
 }
-#else
-static inline void prefill_possible_map(void)
-{
-}
 #endif /* CONFIG_SMP */
 
 extern unsigned disabled_cpus __cpuinitdata;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index ae0d8042cf6..f41c4486c27 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -89,7 +89,7 @@
 
 #include <asm/system.h>
 #include <asm/vsyscall.h>
-#include <asm/smp.h>
+#include <asm/cpu.h>
 #include <asm/desc.h>
 #include <asm/dma.h>
 #include <asm/iommu.h>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 07576bee03e..f8c885bed18 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -53,7 +53,6 @@
 #include <asm/nmi.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
-#include <asm/smp.h>
 #include <asm/trampoline.h>
 #include <asm/cpu.h>
 #include <asm/numa.h>
-- 
cgit v1.2.3


From f472cdba849cc3d838f3788469316e8572463a8c Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 21:34:25 +0530
Subject: x86: smp.h move stack_processor_id declartion to cpu.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpu.h   | 2 ++
 arch/x86/include/asm/smp.h   | 1 -
 arch/x86/kernel/cpu/common.c | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index 29aa6d0752b..f958e7e49c0 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -15,6 +15,8 @@ extern void prefill_possible_map(void);
 
 static inline void prefill_possible_map(void) {}
 
+#define stack_smp_processor_id()		0
+
 #endif /* CONFIG_SMP */
 
 struct x86_cpu {
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 62bd3f68269..ed4af9a89cf 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -173,7 +173,6 @@ extern int safe_smp_processor_id(void);
 #else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
 #define cpu_physical_id(cpu)		boot_cpu_physical_apicid
 #define safe_smp_processor_id()		0
-#define stack_smp_processor_id() 	0
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3f95a40f718..f7619a2eaff 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -21,6 +21,7 @@
 #include <asm/asm.h>
 #include <asm/numa.h>
 #include <asm/smp.h>
+#include <asm/cpu.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
-- 
cgit v1.2.3


From 96b89dc6598a50e3aac8e2c6d826ae3795b7d030 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 21:35:48 +0530
Subject: x86: smp.h move safe_smp_processor_id declartion to cpu.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpu.h    | 1 +
 arch/x86/include/asm/smp.h    | 1 -
 arch/x86/kernel/crash.c       | 2 +-
 arch/x86/kernel/reboot.c      | 1 +
 arch/x86/mach-voyager/setup.c | 1 +
 5 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index f958e7e49c0..4c16888ffa3 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -15,6 +15,7 @@ extern void prefill_possible_map(void);
 
 static inline void prefill_possible_map(void) {}
 
+#define safe_smp_processor_id()			0
 #define stack_smp_processor_id()		0
 
 #endif /* CONFIG_SMP */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index ed4af9a89cf..c92b93594ab 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -172,7 +172,6 @@ extern int safe_smp_processor_id(void);
 
 #else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
 #define cpu_physical_id(cpu)		boot_cpu_physical_apicid
-#define safe_smp_processor_id()		0
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index c689d19e35a..11b93cabdf7 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -24,7 +24,7 @@
 #include <asm/apic.h>
 #include <asm/hpet.h>
 #include <linux/kdebug.h>
-#include <asm/smp.h>
+#include <asm/cpu.h>
 #include <asm/reboot.h>
 #include <asm/virtext.h>
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2b46eb41643..f8536fee5c1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -14,6 +14,7 @@
 #include <asm/reboot.h>
 #include <asm/pci_x86.h>
 #include <asm/virtext.h>
+#include <asm/cpu.h>
 
 #ifdef CONFIG_X86_32
 # include <linux/dmi.h>
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
index a580b9562e7..0ade62555ff 100644
--- a/arch/x86/mach-voyager/setup.c
+++ b/arch/x86/mach-voyager/setup.c
@@ -9,6 +9,7 @@
 #include <asm/e820.h>
 #include <asm/io.h>
 #include <asm/setup.h>
+#include <asm/cpu.h>
 
 void __init pre_intr_init_hook(void)
 {
-- 
cgit v1.2.3


From af8968abf09fe5984bdd206e54e0eeb1dc1fa29c Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 21:37:33 +0530
Subject: x86: smp.h move cpu_physical_id declartion to cpu.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpu.h | 1 +
 arch/x86/include/asm/smp.h | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index 4c16888ffa3..89edafb9339 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -15,6 +15,7 @@ extern void prefill_possible_map(void);
 
 static inline void prefill_possible_map(void) {}
 
+#define cpu_physical_id(cpu)			boot_cpu_physical_apicid
 #define safe_smp_processor_id()			0
 #define stack_smp_processor_id()		0
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index c92b93594ab..c975b6f83c6 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -170,8 +170,6 @@ extern int safe_smp_processor_id(void);
 })
 #define safe_smp_processor_id()		smp_processor_id()
 
-#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
-#define cpu_physical_id(cpu)		boot_cpu_physical_apicid
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-- 
cgit v1.2.3


From 6d652ea1d056390a0c33db92b44ed219284b71af Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Wed, 7 Jan 2009 21:38:59 +0530
Subject: x86: smp.h move boot_cpu_id declartion to cpu.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpu.h | 7 +++++++
 arch/x86/include/asm/smp.h | 6 ------
 arch/x86/kernel/io_apic.c  | 1 +
 3 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index 89edafb9339..f03b23e3286 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -31,4 +31,11 @@ extern void arch_unregister_cpu(int);
 #endif
 
 DECLARE_PER_CPU(int, cpu_state);
+
+#ifdef CONFIG_X86_HAS_BOOT_CPU_ID
+extern unsigned char boot_cpu_id;
+#else
+#define boot_cpu_id				0
+#endif
+
 #endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index c975b6f83c6..74ad9ef6ae0 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -212,11 +212,5 @@ static inline int hard_smp_processor_id(void)
 
 #endif /* CONFIG_X86_LOCAL_APIC */
 
-#ifdef CONFIG_X86_HAS_BOOT_CPU_ID
-extern unsigned char boot_cpu_id;
-#else
-#define boot_cpu_id	0
-#endif
-
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 1c4a1302536..109c91db202 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -46,6 +46,7 @@
 #include <asm/idle.h>
 #include <asm/io.h>
 #include <asm/smp.h>
+#include <asm/cpu.h>
 #include <asm/desc.h>
 #include <asm/proto.h>
 #include <asm/acpi.h>
-- 
cgit v1.2.3


From 41401db698cbb5d1869776bf336881db267e7d19 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Thu, 8 Jan 2009 15:42:46 +0530
Subject: x86: rename intel_mp_floating to mpf_intel

Impact: cleanup, solve 80 columns wrap problems

intel_mp_floating should be renamed to mpf_intel.

The reason: the 'f' in MPF already means 'floating'
which means MP Floating pointer structure -
no need to repeat that in the type name.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mpspec_def.h |  3 ++-
 arch/x86/kernel/mpparse.c         | 12 ++++++------
 2 files changed, 8 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
index 59568bc4767..187dc920193 100644
--- a/arch/x86/include/asm/mpspec_def.h
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -24,7 +24,8 @@
 # endif
 #endif
 
-struct intel_mp_floating {
+/* Intel MP Floating Pointer Structure */
+struct mpf_intel {
 	char mpf_signature[4];		/* "_MP_"			*/
 	unsigned int mpf_physptr;	/* Configuration table address	*/
 	unsigned char mpf_length;	/* Our length (paragraphs)	*/
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index c0601c2848a..6cea941c4db 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -569,14 +569,14 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	}
 }
 
-static struct intel_mp_floating *mpf_found;
+static struct mpf_intel *mpf_found;
 
 /*
  * Scan the memory blocks for an SMP configuration block.
  */
 static void __init __get_smp_config(unsigned int early)
 {
-	struct intel_mp_floating *mpf = mpf_found;
+	struct mpf_intel *mpf = mpf_found;
 
 	if (!mpf)
 		return;
@@ -687,14 +687,14 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 				  unsigned reserve)
 {
 	unsigned int *bp = phys_to_virt(base);
-	struct intel_mp_floating *mpf;
+	struct mpf_intel *mpf;
 
 	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
 			bp, length);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
-		mpf = (struct intel_mp_floating *)bp;
+		mpf = (struct mpf_intel *)bp;
 		if ((*bp == SMP_MAGIC_IDENT) &&
 		    (mpf->mpf_length == 1) &&
 		    !mpf_checksum((unsigned char *)bp, 16) &&
@@ -1000,7 +1000,7 @@ static int __init update_mp_table(void)
 {
 	char str[16];
 	char oem[10];
-	struct intel_mp_floating *mpf;
+	struct mpf_intel *mpf;
 	struct mpc_table *mpc, *mpc_new;
 
 	if (!enable_update_mptable)
@@ -1052,7 +1052,7 @@ static int __init update_mp_table(void)
 		mpc = mpc_new;
 		/* check if we can modify that */
 		if (mpc_new_phys - mpf->mpf_physptr) {
-			struct intel_mp_floating *mpf_new;
+			struct mpf_intel *mpf_new;
 			/* steal 16 bytes from [0, 1k) */
 			printk(KERN_INFO "mpf new: %x\n", 0x400 - 16);
 			mpf_new = phys_to_virt(0x400 - 16);
-- 
cgit v1.2.3


From 1eb1b3b65dc3e3ffcc6a60e115c085c0c11c1077 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Thu, 8 Jan 2009 15:43:26 +0530
Subject: x86: rename all fields of mpf_intel mpf_X to X

Impact: cleanup, solve 80 columns wrap problems

It would be cleaner to rename all the mpf->mpf_X fields to
mpf->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpf' entity -
no need to duplicate that in the field too)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mpspec_def.h | 20 ++++++++--------
 arch/x86/kernel/mpparse.c         | 50 +++++++++++++++++++--------------------
 2 files changed, 35 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
index 187dc920193..4a7f96d7c18 100644
--- a/arch/x86/include/asm/mpspec_def.h
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -26,16 +26,16 @@
 
 /* Intel MP Floating Pointer Structure */
 struct mpf_intel {
-	char mpf_signature[4];		/* "_MP_"			*/
-	unsigned int mpf_physptr;	/* Configuration table address	*/
-	unsigned char mpf_length;	/* Our length (paragraphs)	*/
-	unsigned char mpf_specification;/* Specification version	*/
-	unsigned char mpf_checksum;	/* Checksum (makes sum 0)	*/
-	unsigned char mpf_feature1;	/* Standard or configuration ?	*/
-	unsigned char mpf_feature2;	/* Bit7 set for IMCR|PIC	*/
-	unsigned char mpf_feature3;	/* Unused (0)			*/
-	unsigned char mpf_feature4;	/* Unused (0)			*/
-	unsigned char mpf_feature5;	/* Unused (0)			*/
+	char signature[4];		/* "_MP_"			*/
+	unsigned int physptr;		/* Configuration table address	*/
+	unsigned char length;		/* Our length (paragraphs)	*/
+	unsigned char specification;	/* Specification version	*/
+	unsigned char checksum;		/* Checksum (makes sum 0)	*/
+	unsigned char feature1;		/* Standard or configuration ?	*/
+	unsigned char feature2;		/* Bit7 set for IMCR|PIC	*/
+	unsigned char feature3;		/* Unused (0)			*/
+	unsigned char feature4;		/* Unused (0)			*/
+	unsigned char feature5;		/* Unused (0)			*/
 };
 
 #define MPC_SIGNATURE "PCMP"
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 6cea941c4db..8385d4e7e15 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -597,9 +597,9 @@ static void __init __get_smp_config(unsigned int early)
 	}
 
 	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
-	       mpf->mpf_specification);
+	       mpf->specification);
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
-	if (mpf->mpf_feature2 & (1 << 7)) {
+	if (mpf->feature2 & (1 << 7)) {
 		printk(KERN_INFO "    IMCR and PIC compatibility mode.\n");
 		pic_mode = 1;
 	} else {
@@ -610,7 +610,7 @@ static void __init __get_smp_config(unsigned int early)
 	/*
 	 * Now see if we need to read further.
 	 */
-	if (mpf->mpf_feature1 != 0) {
+	if (mpf->feature1 != 0) {
 		if (early) {
 			/*
 			 * local APIC has default address
@@ -620,16 +620,16 @@ static void __init __get_smp_config(unsigned int early)
 		}
 
 		printk(KERN_INFO "Default MP configuration #%d\n",
-		       mpf->mpf_feature1);
-		construct_default_ISA_mptable(mpf->mpf_feature1);
+		       mpf->feature1);
+		construct_default_ISA_mptable(mpf->feature1);
 
-	} else if (mpf->mpf_physptr) {
+	} else if (mpf->physptr) {
 
 		/*
 		 * Read the physical hardware table.  Anything here will
 		 * override the defaults.
 		 */
-		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
+		if (!smp_read_mpc(phys_to_virt(mpf->physptr), early)) {
 #ifdef CONFIG_X86_LOCAL_APIC
 			smp_found_config = 0;
 #endif
@@ -696,10 +696,10 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	while (length > 0) {
 		mpf = (struct mpf_intel *)bp;
 		if ((*bp == SMP_MAGIC_IDENT) &&
-		    (mpf->mpf_length == 1) &&
+		    (mpf->length == 1) &&
 		    !mpf_checksum((unsigned char *)bp, 16) &&
-		    ((mpf->mpf_specification == 1)
-		     || (mpf->mpf_specification == 4))) {
+		    ((mpf->specification == 1)
+		     || (mpf->specification == 4))) {
 #ifdef CONFIG_X86_LOCAL_APIC
 			smp_found_config = 1;
 #endif
@@ -712,7 +712,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 				return 1;
 			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE,
 					BOOTMEM_DEFAULT);
-			if (mpf->mpf_physptr) {
+			if (mpf->physptr) {
 				unsigned long size = PAGE_SIZE;
 #ifdef CONFIG_X86_32
 				/*
@@ -721,14 +721,14 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 				 * the bottom is mapped now.
 				 * PC-9800's MPC table places on the very last
 				 * of physical memory; so that simply reserving
-				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
+				 * PAGE_SIZE from mpf->physptr yields BUG()
 				 * in reserve_bootmem.
 				 */
 				unsigned long end = max_low_pfn * PAGE_SIZE;
-				if (mpf->mpf_physptr + size > end)
-					size = end - mpf->mpf_physptr;
+				if (mpf->physptr + size > end)
+					size = end - mpf->physptr;
 #endif
-				reserve_bootmem_generic(mpf->mpf_physptr, size,
+				reserve_bootmem_generic(mpf->physptr, size,
 						BOOTMEM_DEFAULT);
 			}
 
@@ -1013,19 +1013,19 @@ static int __init update_mp_table(void)
 	/*
 	 * Now see if we need to go further.
 	 */
-	if (mpf->mpf_feature1 != 0)
+	if (mpf->feature1 != 0)
 		return 0;
 
-	if (!mpf->mpf_physptr)
+	if (!mpf->physptr)
 		return 0;
 
-	mpc = phys_to_virt(mpf->mpf_physptr);
+	mpc = phys_to_virt(mpf->physptr);
 
 	if (!smp_check_mpc(mpc, oem, str))
 		return 0;
 
 	printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf));
-	printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr);
+	printk(KERN_INFO "physptr: %x\n", mpf->physptr);
 
 	if (mpc_new_phys && mpc->length > mpc_new_length) {
 		mpc_new_phys = 0;
@@ -1046,23 +1046,23 @@ static int __init update_mp_table(void)
 		}
 		printk(KERN_INFO "use in-positon replacing\n");
 	} else {
-		mpf->mpf_physptr = mpc_new_phys;
+		mpf->physptr = mpc_new_phys;
 		mpc_new = phys_to_virt(mpc_new_phys);
 		memcpy(mpc_new, mpc, mpc->length);
 		mpc = mpc_new;
 		/* check if we can modify that */
-		if (mpc_new_phys - mpf->mpf_physptr) {
+		if (mpc_new_phys - mpf->physptr) {
 			struct mpf_intel *mpf_new;
 			/* steal 16 bytes from [0, 1k) */
 			printk(KERN_INFO "mpf new: %x\n", 0x400 - 16);
 			mpf_new = phys_to_virt(0x400 - 16);
 			memcpy(mpf_new, mpf, 16);
 			mpf = mpf_new;
-			mpf->mpf_physptr = mpc_new_phys;
+			mpf->physptr = mpc_new_phys;
 		}
-		mpf->mpf_checksum = 0;
-		mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16);
-		printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr);
+		mpf->checksum = 0;
+		mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
+		printk(KERN_INFO "physptr new: %x\n", mpf->physptr);
 	}
 
 	/*
-- 
cgit v1.2.3


From 068790334cececc3d2d945617ccc585477da2e38 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 10 Jan 2009 12:17:37 +0530
Subject: x86: smp.h move cpu_callin_mask and cpu_callin_map declartion to
 cpumask.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpumask.h | 19 +++++++++++++++++++
 arch/x86/include/asm/smp.h     |  3 ---
 arch/x86/kernel/cpu/common.c   |  1 +
 arch/x86/kernel/setup_percpu.c |  1 +
 arch/x86/kernel/smpboot.c      |  1 +
 5 files changed, 22 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/include/asm/cpumask.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
new file mode 100644
index 00000000000..308dddd5632
--- /dev/null
+++ b/arch/x86/include/asm/cpumask.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_X86_CPUMASK_H
+#define _ASM_X86_CPUMASK_H
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+
+#ifdef CONFIG_X86_64
+
+extern cpumask_var_t cpu_callin_mask;
+
+#else /* CONFIG_X86_32 */
+
+extern cpumask_t cpu_callin_map;
+
+#define cpu_callin_mask		((struct cpumask *)&cpu_callin_map)
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_CPUMASK_H */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 1963e27673c..c35aa5c0dd1 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -20,19 +20,16 @@
 
 #ifdef CONFIG_X86_64
 
-extern cpumask_var_t cpu_callin_mask;
 extern cpumask_var_t cpu_callout_mask;
 extern cpumask_var_t cpu_initialized_mask;
 extern cpumask_var_t cpu_sibling_setup_mask;
 
 #else /* CONFIG_X86_32 */
 
-extern cpumask_t cpu_callin_map;
 extern cpumask_t cpu_callout_map;
 extern cpumask_t cpu_initialized;
 extern cpumask_t cpu_sibling_setup_map;
 
-#define cpu_callin_mask		((struct cpumask *)&cpu_callin_map)
 #define cpu_callout_mask	((struct cpumask *)&cpu_callout_map)
 #define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 #define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 14e543b6fd4..f0025846244 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -22,6 +22,7 @@
 #include <asm/numa.h>
 #include <asm/smp.h>
 #include <asm/cpu.h>
+#include <asm/cpumask.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 55c46074eba..bf63de72b64 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -13,6 +13,7 @@
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
 #include <asm/highmem.h>
+#include <asm/cpumask.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 unsigned int num_processors;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6c2b8444b83..84ac1cf46d8 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -55,6 +55,7 @@
 #include <asm/idle.h>
 #include <asm/trampoline.h>
 #include <asm/cpu.h>
+#include <asm/cpumask.h>
 #include <asm/numa.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
-- 
cgit v1.2.3


From fb8fd077fbf0de6662acfd240e8e6b25cf3202ca Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 10 Jan 2009 12:20:24 +0530
Subject: x86: smp.h move cpu_callout_mask and cpu_callout_map declartion to
 cpumask.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpumask.h | 3 +++
 arch/x86/include/asm/smp.h     | 4 +---
 arch/x86/kernel/smpboot.c      | 1 -
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
index 308dddd5632..9933fcad3c8 100644
--- a/arch/x86/include/asm/cpumask.h
+++ b/arch/x86/include/asm/cpumask.h
@@ -6,12 +6,15 @@
 #ifdef CONFIG_X86_64
 
 extern cpumask_var_t cpu_callin_mask;
+extern cpumask_var_t cpu_callout_mask;
 
 #else /* CONFIG_X86_32 */
 
 extern cpumask_t cpu_callin_map;
+extern cpumask_t cpu_callout_map;
 
 #define cpu_callin_mask		((struct cpumask *)&cpu_callin_map)
+#define cpu_callout_mask	((struct cpumask *)&cpu_callout_map)
 
 #endif /* CONFIG_X86_32 */
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index c35aa5c0dd1..a3afec5cad0 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -17,20 +17,18 @@
 #endif
 #include <asm/pda.h>
 #include <asm/thread_info.h>
+#include <asm/cpumask.h>
 
 #ifdef CONFIG_X86_64
 
-extern cpumask_var_t cpu_callout_mask;
 extern cpumask_var_t cpu_initialized_mask;
 extern cpumask_var_t cpu_sibling_setup_mask;
 
 #else /* CONFIG_X86_32 */
 
-extern cpumask_t cpu_callout_map;
 extern cpumask_t cpu_initialized;
 extern cpumask_t cpu_sibling_setup_map;
 
-#define cpu_callout_mask	((struct cpumask *)&cpu_callout_map)
 #define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 #define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 84ac1cf46d8..6c2b8444b83 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -55,7 +55,6 @@
 #include <asm/idle.h>
 #include <asm/trampoline.h>
 #include <asm/cpu.h>
-#include <asm/cpumask.h>
 #include <asm/numa.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
-- 
cgit v1.2.3


From 493f6ca54e1ea59732dd334e35c5fe2d8e440b06 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 10 Jan 2009 12:48:22 +0530
Subject: x86: smp.h move cpu_initialized_mask and cpu_initialized declartion
 to cpumask.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpumask.h | 3 +++
 arch/x86/include/asm/smp.h     | 3 ---
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
index 9933fcad3c8..d4cfd120b84 100644
--- a/arch/x86/include/asm/cpumask.h
+++ b/arch/x86/include/asm/cpumask.h
@@ -7,14 +7,17 @@
 
 extern cpumask_var_t cpu_callin_mask;
 extern cpumask_var_t cpu_callout_mask;
+extern cpumask_var_t cpu_initialized_mask;
 
 #else /* CONFIG_X86_32 */
 
 extern cpumask_t cpu_callin_map;
 extern cpumask_t cpu_callout_map;
+extern cpumask_t cpu_initialized;
 
 #define cpu_callin_mask		((struct cpumask *)&cpu_callin_map)
 #define cpu_callout_mask	((struct cpumask *)&cpu_callout_map)
+#define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 
 #endif /* CONFIG_X86_32 */
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index a3afec5cad0..7d2a80319e8 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -21,15 +21,12 @@
 
 #ifdef CONFIG_X86_64
 
-extern cpumask_var_t cpu_initialized_mask;
 extern cpumask_var_t cpu_sibling_setup_mask;
 
 #else /* CONFIG_X86_32 */
 
-extern cpumask_t cpu_initialized;
 extern cpumask_t cpu_sibling_setup_map;
 
-#define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 #define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
 
 #endif /* CONFIG_X86_32 */
-- 
cgit v1.2.3


From 52811d8c9beb67da6bc4b770de3c4134376788a1 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 10 Jan 2009 12:58:50 +0530
Subject: x86: smp.h move cpu_sibling_setup_mask and cpu_sibling_setup_map
 declartion to cpumask.h

Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpumask.h |  3 +++
 arch/x86/include/asm/smp.h     | 12 ------------
 2 files changed, 3 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
index d4cfd120b84..26c6dad9047 100644
--- a/arch/x86/include/asm/cpumask.h
+++ b/arch/x86/include/asm/cpumask.h
@@ -8,16 +8,19 @@
 extern cpumask_var_t cpu_callin_mask;
 extern cpumask_var_t cpu_callout_mask;
 extern cpumask_var_t cpu_initialized_mask;
+extern cpumask_var_t cpu_sibling_setup_mask;
 
 #else /* CONFIG_X86_32 */
 
 extern cpumask_t cpu_callin_map;
 extern cpumask_t cpu_callout_map;
 extern cpumask_t cpu_initialized;
+extern cpumask_t cpu_sibling_setup_map;
 
 #define cpu_callin_mask		((struct cpumask *)&cpu_callin_map)
 #define cpu_callout_mask	((struct cpumask *)&cpu_callout_map)
 #define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
+#define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
 
 #endif /* CONFIG_X86_32 */
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 7d2a80319e8..a8cea7b0943 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -19,18 +19,6 @@
 #include <asm/thread_info.h>
 #include <asm/cpumask.h>
 
-#ifdef CONFIG_X86_64
-
-extern cpumask_var_t cpu_sibling_setup_mask;
-
-#else /* CONFIG_X86_32 */
-
-extern cpumask_t cpu_sibling_setup_map;
-
-#define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
-
-#endif /* CONFIG_X86_32 */
-
 extern int __cpuinit get_local_pda(int cpu);
 
 extern int smp_num_siblings;
-- 
cgit v1.2.3


From 7106a5ab89c50c6b5aadea0850b40323804a922d Mon Sep 17 00:00:00 2001
From: Benjamin LaHaise <bcrl@kvack.org>
Date: Sat, 10 Jan 2009 23:00:22 -0500
Subject: x86-64: remove locked instruction from switch_to()

Impact: micro-optimization

The patch below removes an unnecessary locked instruction from
switch_to().  TIF_FORK is only ever set in copy_thread() on initial
process creation, and gets cleared during the first scheduling of the
process.  As such, it is safe to use an unlocked test for the flag
within switch_to().

Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/system.h | 6 +++---
 arch/x86/kernel/entry_64.S    | 2 ++
 2 files changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 8e626ea33a1..fa47b1e6a86 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -96,15 +96,15 @@ do {									\
 	     "thread_return:\n\t"					  \
 	     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
-	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
 	     "movq %%rax,%%rdi\n\t" 					  \
-	     "jc   ret_from_fork\n\t"					  \
+	     "testl  %[_tif_fork],%P[ti_flags](%%r8)\n\t"	  \
+	     "jnz   ret_from_fork\n\t"					  \
 	     RESTORE_CONTEXT						  \
 	     : "=a" (last)					  	  \
 	     : [next] "S" (next), [prev] "D" (prev),			  \
 	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
-	       [tif_fork] "i" (TIF_FORK),			  	  \
+	       [_tif_fork] "i" (_TIF_FORK),			  	  \
 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
 	       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))  \
 	     : "memory", "cc" __EXTRA_CLOBBER)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index e28c7a98779..38dd37458e4 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -408,6 +408,8 @@ END(save_paranoid)
 ENTRY(ret_from_fork)
 	DEFAULT_FRAME
 
+	LOCK ; btr $TIF_FORK,TI_flags(%r8)
+
 	push kernel_eflags(%rip)
 	CFI_ADJUST_CFA_OFFSET 8
 	popf					# reset kernel eflags
-- 
cgit v1.2.3


From dee4102a9a5882b4f7d5cc165ba29e8cc63cf92e Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 11 Jan 2009 00:29:15 -0800
Subject: sparseirq: use kstat_irqs_cpu instead

Impact: build fix

Ingo Molnar wrote:

> tip/arch/blackfin/kernel/irqchip.c: In function 'show_interrupts':
> tip/arch/blackfin/kernel/irqchip.c:85: error: 'struct kernel_stat' has no member named 'irqs'
> make[2]: *** [arch/blackfin/kernel/irqchip.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
>

So could move kstat_irqs array to irq_desc struct.

(s390, m68k, sparc) are not touched yet, because they don't support genirq

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/blackfin/kernel/irqchip.c          | 2 +-
 arch/frv/kernel/irq.c                   | 2 +-
 arch/h8300/kernel/irq.c                 | 4 ++--
 arch/ia64/kernel/irq.c                  | 2 +-
 arch/m32r/kernel/irq.c                  | 2 +-
 arch/mips/kernel/irq.c                  | 2 +-
 arch/mn10300/kernel/irq.c               | 2 +-
 arch/parisc/kernel/irq.c                | 2 +-
 arch/powerpc/kernel/irq.c               | 2 +-
 arch/powerpc/platforms/cell/interrupt.c | 2 +-
 arch/sh/kernel/irq.c                    | 2 +-
 arch/um/kernel/irq.c                    | 2 +-
 arch/xtensa/kernel/irq.c                | 2 +-
 13 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index ab8209cbbad..a4e12d1b379 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -82,7 +82,7 @@ int show_interrupts(struct seq_file *p, void *v)
 			goto skip;
 		seq_printf(p, "%3d: ", i);
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 		seq_printf(p, " %8s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c
index 73abae767fd..af3e824b91b 100644
--- a/arch/frv/kernel/irq.c
+++ b/arch/frv/kernel/irq.c
@@ -74,7 +74,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		if (action) {
 			seq_printf(p, "%3d: ", i);
 			for_each_present_cpu(cpu)
-				seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+				seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
 			seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
 			seq_printf(p, "  %s", action->name);
 			for (action = action->next;
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
index ef4f0047067..74f8dd7b34d 100644
--- a/arch/h8300/kernel/irq.c
+++ b/arch/h8300/kernel/irq.c
@@ -183,7 +183,7 @@ asmlinkage void do_IRQ(int irq)
 #if defined(CONFIG_PROC_FS)
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *) v, j;
+	int i = *(loff_t *) v;
 	struct irqaction * action;
 	unsigned long flags;
 
@@ -196,7 +196,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		if (!action)
 			goto unlock;
 		seq_printf(p, "%3d: ",i);
-		seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+		seq_printf(p, "%10u ", kstat_irqs(i));
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
 		seq_printf(p, "-%-8s", irq_desc[i].name);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index a58f64ca9f0..4f596613bff 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -80,7 +80,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j) {
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 		}
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c
index 2aeae467009..8dfd31e87c4 100644
--- a/arch/m32r/kernel/irq.c
+++ b/arch/m32r/kernel/irq.c
@@ -49,7 +49,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->typename);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 4b4007b3083..98f336dc3cd 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -108,7 +108,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 56c64ccc9c2..50fdb5c16e0 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -221,7 +221,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		if (action) {
 			seq_printf(p, "%3d: ", i);
 			for_each_present_cpu(cpu)
-				seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+				seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
 			seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
 				   (GxICR(i) & GxICR_LEVEL) >>
 				   GxICR_LEVEL_SHIFT);
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index ac2c822928c..704341b0b09 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -183,7 +183,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%3d: ", i);
 #ifdef CONFIG_SMP
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #else
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #endif
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 23b8b5e36f9..17efb7118db 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -190,7 +190,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%3d: ", i);
 #ifdef CONFIG_SMP
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #else
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #endif /* CONFIG_SMP */
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 28c04dab263..1f0d774ad92 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -254,7 +254,7 @@ static void handle_iic_irq(unsigned int irq, struct irq_desc *desc)
 		goto out_eoi;
 	}
 
-	kstat_cpu(cpu).irqs[irq]++;
+	kstat_incr_irqs_this_cpu(irq, desc);
 
 	/* Mark the IRQ currently in progress.*/
 	desc->status |= IRQ_INPROGRESS;
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 64b7690c664..0080a1607aa 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -51,7 +51,7 @@ int show_interrupts(struct seq_file *p, void *v)
 			goto unlock;
 		seq_printf(p, "%3d: ",i);
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
 		seq_printf(p, "-%-8s", irq_desc[i].name);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 3d7aad09b17..336b6156907 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -42,7 +42,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->typename);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index 5fbcde59a92..f3b66fba5b8 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -99,7 +99,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->typename);
 		seq_printf(p, "  %s", action->name);
-- 
cgit v1.2.3


From 7f7ace0cda64c99599c23785f8979a072e118058 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sat, 10 Jan 2009 21:58:08 -0800
Subject: cpumask: update irq_desc to use cpumask_var_t

Impact: reduce memory usage, use new cpumask API.

Replace the affinity and pending_masks with cpumask_var_t's.  This adds
to the significant size reduction done with the SPARSE_IRQS changes.

The added functions (init_alloc_desc_masks & init_copy_desc_masks) are
in the include file so they can be inlined (and optimized out for the
!CONFIG_CPUMASKS_OFFSTACK case.)  [Naming chosen to be consistent with
the other init*irq functions, as well as the backwards arg declaration
of "from, to" instead of the more common "to, from" standard.]

Includes a slight change to the declaration of struct irq_desc to embed
the pending_mask within ifdef(CONFIG_SMP) to be consistent with other
references, and some small changes to Xen.

Tested: sparse/non-sparse/cpumask_offstack/non-cpumask_offstack/nonuma/nosmp on x86_64

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: virtualization@lists.osdl.org
Cc: xen-devel@lists.xensource.com
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
---
 arch/x86/kernel/io_apic.c | 20 ++++++++++----------
 arch/x86/kernel/irq_32.c  |  2 +-
 arch/x86/kernel/irq_64.c  |  2 +-
 3 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 1c4a1302536..1337eab60ec 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -356,7 +356,7 @@ set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
 
 	if (!cfg->move_in_progress) {
 		/* it means that domain is not changed */
-		if (!cpumask_intersects(&desc->affinity, mask))
+		if (!cpumask_intersects(desc->affinity, mask))
 			cfg->move_desc_pending = 1;
 	}
 }
@@ -579,9 +579,9 @@ set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
 	if (assign_irq_vector(irq, cfg, mask))
 		return BAD_APICID;
 
-	cpumask_and(&desc->affinity, cfg->domain, mask);
+	cpumask_and(desc->affinity, cfg->domain, mask);
 	set_extra_move_desc(desc, mask);
-	return cpu_mask_to_apicid_and(&desc->affinity, cpu_online_mask);
+	return cpu_mask_to_apicid_and(desc->affinity, cpu_online_mask);
 }
 
 static void
@@ -2383,7 +2383,7 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
 	if (cfg->move_in_progress)
 		send_cleanup_vector(cfg);
 
-	cpumask_copy(&desc->affinity, mask);
+	cpumask_copy(desc->affinity, mask);
 }
 
 static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
@@ -2405,11 +2405,11 @@ static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
 	}
 
 	/* everthing is clear. we have right of way */
-	migrate_ioapic_irq_desc(desc, &desc->pending_mask);
+	migrate_ioapic_irq_desc(desc, desc->pending_mask);
 
 	ret = 0;
 	desc->status &= ~IRQ_MOVE_PENDING;
-	cpumask_clear(&desc->pending_mask);
+	cpumask_clear(desc->pending_mask);
 
 unmask:
 	unmask_IO_APIC_irq_desc(desc);
@@ -2434,7 +2434,7 @@ static void ir_irq_migration(struct work_struct *work)
 				continue;
 			}
 
-			desc->chip->set_affinity(irq, &desc->pending_mask);
+			desc->chip->set_affinity(irq, desc->pending_mask);
 			spin_unlock_irqrestore(&desc->lock, flags);
 		}
 	}
@@ -2448,7 +2448,7 @@ static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
 {
 	if (desc->status & IRQ_LEVEL) {
 		desc->status |= IRQ_MOVE_PENDING;
-		cpumask_copy(&desc->pending_mask, mask);
+		cpumask_copy(desc->pending_mask, mask);
 		migrate_irq_remapped_level_desc(desc);
 		return;
 	}
@@ -2516,7 +2516,7 @@ static void irq_complete_move(struct irq_desc **descp)
 
 		/* domain has not changed, but affinity did */
 		me = smp_processor_id();
-		if (cpu_isset(me, desc->affinity)) {
+		if (cpumask_test_cpu(me, desc->affinity)) {
 			*descp = desc = move_irq_desc(desc, me);
 			/* get the new one */
 			cfg = desc->chip_data;
@@ -4039,7 +4039,7 @@ void __init setup_ioapic_dest(void)
 			 */
 			if (desc->status &
 			    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
-				mask = &desc->affinity;
+				mask = desc->affinity;
 			else
 				mask = TARGET_CPUS;
 
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 74b9ff7341e..e0f29be8ab0 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -248,7 +248,7 @@ void fixup_irqs(void)
 		if (irq == 2)
 			continue;
 
-		affinity = &desc->affinity;
+		affinity = desc->affinity;
 		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
 			printk("Breaking affinity for irq %i\n", irq);
 			affinity = cpu_all_mask;
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 63c88e6ec02..0b21cb1ea11 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -100,7 +100,7 @@ void fixup_irqs(void)
 		/* interrupt's are disabled at this point */
 		spin_lock(&desc->lock);
 
-		affinity = &desc->affinity;
+		affinity = desc->affinity;
 		if (!irq_has_action(irq) ||
 		    cpumask_equal(affinity, cpu_online_mask)) {
 			spin_unlock(&desc->lock);
-- 
cgit v1.2.3


From 4595f9620cda8a1e973588e743cf5f8436dd20c6 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Sat, 10 Jan 2009 21:58:09 -0800
Subject: x86: change flush_tlb_others to take a const struct cpumask

Impact: reduce stack usage, use new cpumask API.

This is made a little more tricky by uv_flush_tlb_others which
actually alters its argument, for an IPI to be sent to the remaining
cpus in the mask.

I solve this by allocating a cpumask_var_t for this case and falling back
to IPI should this fail.

To eliminate temporaries in the caller, all flush_tlb_others implementations
now do the this-cpu-elimination step themselves.

Note also the curious "cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask)"
which has been there since pre-git and yet f->flush_cpumask is always zero
at this point.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/include/asm/paravirt.h  |  8 +++--
 arch/x86/include/asm/tlbflush.h  |  8 ++---
 arch/x86/include/asm/uv/uv_bau.h |  3 +-
 arch/x86/kernel/tlb_32.c         | 67 +++++++++++++++++-----------------------
 arch/x86/kernel/tlb_64.c         | 61 +++++++++++++++++++-----------------
 arch/x86/kernel/tlb_uv.c         | 16 +++++-----
 arch/x86/xen/enlighten.c         | 31 +++++++------------
 7 files changed, 93 insertions(+), 101 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index ba3e2ff6aed..c26c6bf4da0 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -244,7 +244,8 @@ struct pv_mmu_ops {
 	void (*flush_tlb_user)(void);
 	void (*flush_tlb_kernel)(void);
 	void (*flush_tlb_single)(unsigned long addr);
-	void (*flush_tlb_others)(const cpumask_t *cpus, struct mm_struct *mm,
+	void (*flush_tlb_others)(const struct cpumask *cpus,
+				 struct mm_struct *mm,
 				 unsigned long va);
 
 	/* Hooks for allocating and freeing a pagetable top-level */
@@ -984,10 +985,11 @@ static inline void __flush_tlb_single(unsigned long addr)
 	PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr);
 }
 
-static inline void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+static inline void flush_tlb_others(const struct cpumask *cpumask,
+				    struct mm_struct *mm,
 				    unsigned long va)
 {
-	PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va);
+	PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, cpumask, mm, va);
 }
 
 static inline int paravirt_pgd_alloc(struct mm_struct *mm)
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 0e7bbb54911..f4e1b550ce6 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -113,7 +113,7 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 		__flush_tlb();
 }
 
-static inline void native_flush_tlb_others(const cpumask_t *cpumask,
+static inline void native_flush_tlb_others(const struct cpumask *cpumask,
 					   struct mm_struct *mm,
 					   unsigned long va)
 {
@@ -142,8 +142,8 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 	flush_tlb_mm(vma->vm_mm);
 }
 
-void native_flush_tlb_others(const cpumask_t *cpumask, struct mm_struct *mm,
-			     unsigned long va);
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     struct mm_struct *mm, unsigned long va);
 
 #define TLBSTATE_OK	1
 #define TLBSTATE_LAZY	2
@@ -166,7 +166,7 @@ static inline void reset_lazy_tlbstate(void)
 #endif	/* SMP */
 
 #ifndef CONFIG_PARAVIRT
-#define flush_tlb_others(mask, mm, va)	native_flush_tlb_others(&mask, mm, va)
+#define flush_tlb_others(mask, mm, va)	native_flush_tlb_others(mask, mm, va)
 #endif
 
 static inline void flush_tlb_kernel_range(unsigned long start,
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 50423c7b56b..74e6393bfdd 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -325,7 +325,8 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
 #define cpubit_isset(cpu, bau_local_cpumask) \
 	test_bit((cpu), (bau_local_cpumask).bits)
 
-extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
+extern int uv_flush_tlb_others(struct cpumask *,
+			       struct mm_struct *, unsigned long);
 extern void uv_bau_message_intr1(void);
 extern void uv_bau_timeout_intr1(void);
 
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index ce505464224..ec53818f4e3 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -20,7 +20,7 @@ DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate)
  *	Optimizations Manfred Spraul <manfred@colorfullife.com>
  */
 
-static cpumask_t flush_cpumask;
+static cpumask_var_t flush_cpumask;
 static struct mm_struct *flush_mm;
 static unsigned long flush_va;
 static DEFINE_SPINLOCK(tlbstate_lock);
@@ -92,7 +92,7 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
 
 	cpu = get_cpu();
 
-	if (!cpu_isset(cpu, flush_cpumask))
+	if (!cpumask_test_cpu(cpu, flush_cpumask))
 		goto out;
 		/*
 		 * This was a BUG() but until someone can quote me the
@@ -114,35 +114,22 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
 	}
 	ack_APIC_irq();
 	smp_mb__before_clear_bit();
-	cpu_clear(cpu, flush_cpumask);
+	cpumask_clear_cpu(cpu, flush_cpumask);
 	smp_mb__after_clear_bit();
 out:
 	put_cpu_no_resched();
 	inc_irq_stat(irq_tlb_count);
 }
 
-void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
-			     unsigned long va)
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     struct mm_struct *mm, unsigned long va)
 {
-	cpumask_t cpumask = *cpumaskp;
-
 	/*
-	 * A couple of (to be removed) sanity checks:
-	 *
-	 * - current CPU must not be in mask
 	 * - mask must exist :)
 	 */
-	BUG_ON(cpus_empty(cpumask));
-	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(cpumask_empty(cpumask));
 	BUG_ON(!mm);
 
-#ifdef CONFIG_HOTPLUG_CPU
-	/* If a CPU which we ran on has gone down, OK. */
-	cpus_and(cpumask, cpumask, cpu_online_map);
-	if (unlikely(cpus_empty(cpumask)))
-		return;
-#endif
-
 	/*
 	 * i'm not happy about this global shared spinlock in the
 	 * MM hot path, but we'll see how contended it is.
@@ -150,9 +137,17 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 	 */
 	spin_lock(&tlbstate_lock);
 
+	cpumask_andnot(flush_cpumask, cpumask, cpumask_of(smp_processor_id()));
+#ifdef CONFIG_HOTPLUG_CPU
+	/* If a CPU which we ran on has gone down, OK. */
+	cpumask_and(flush_cpumask, flush_cpumask, cpu_online_mask);
+	if (unlikely(cpumask_empty(flush_cpumask))) {
+		spin_unlock(&tlbstate_lock);
+		return;
+	}
+#endif
 	flush_mm = mm;
 	flush_va = va;
-	cpus_or(flush_cpumask, cpumask, flush_cpumask);
 
 	/*
 	 * Make the above memory operations globally visible before
@@ -163,9 +158,9 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 	 * We have to send the IPI only to
 	 * CPUs affected.
 	 */
-	send_IPI_mask(&cpumask, INVALIDATE_TLB_VECTOR);
+	send_IPI_mask(flush_cpumask, INVALIDATE_TLB_VECTOR);
 
-	while (!cpus_empty(flush_cpumask))
+	while (!cpumask_empty(flush_cpumask))
 		/* nothing. lockup detection does not belong here */
 		cpu_relax();
 
@@ -177,25 +172,19 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 void flush_tlb_current_task(void)
 {
 	struct mm_struct *mm = current->mm;
-	cpumask_t cpu_mask;
 
 	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
 
 	local_flush_tlb();
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
 	preempt_enable();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t cpu_mask;
 
 	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
 
 	if (current->active_mm == mm) {
 		if (current->mm)
@@ -203,8 +192,8 @@ void flush_tlb_mm(struct mm_struct *mm)
 		else
 			leave_mm(smp_processor_id());
 	}
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
 
 	preempt_enable();
 }
@@ -212,11 +201,8 @@ void flush_tlb_mm(struct mm_struct *mm)
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	cpumask_t cpu_mask;
 
 	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
 
 	if (current->active_mm == mm) {
 		if (current->mm)
@@ -225,9 +211,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 			leave_mm(smp_processor_id());
 	}
 
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, va);
-
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
 	preempt_enable();
 }
 EXPORT_SYMBOL(flush_tlb_page);
@@ -254,3 +239,9 @@ void reset_lazy_tlbstate(void)
 	per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
 }
 
+static int init_flush_cpumask(void)
+{
+	alloc_cpumask_var(&flush_cpumask, GFP_KERNEL);
+	return 0;
+}
+early_initcall(init_flush_cpumask);
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index f8be6f1d2e4..38836aef51b 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -43,10 +43,10 @@
 
 union smp_flush_state {
 	struct {
-		cpumask_t flush_cpumask;
 		struct mm_struct *flush_mm;
 		unsigned long flush_va;
 		spinlock_t tlbstate_lock;
+		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
 	};
 	char pad[SMP_CACHE_BYTES];
 } ____cacheline_aligned;
@@ -131,7 +131,7 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 	sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
 	f = &per_cpu(flush_state, sender);
 
-	if (!cpu_isset(cpu, f->flush_cpumask))
+	if (!cpumask_test_cpu(cpu, to_cpumask(f->flush_cpumask)))
 		goto out;
 		/*
 		 * This was a BUG() but until someone can quote me the
@@ -153,19 +153,15 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 	}
 out:
 	ack_APIC_irq();
-	cpu_clear(cpu, f->flush_cpumask);
+	cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask));
 	inc_irq_stat(irq_tlb_count);
 }
 
-void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
-			     unsigned long va)
+static void flush_tlb_others_ipi(const struct cpumask *cpumask,
+				 struct mm_struct *mm, unsigned long va)
 {
 	int sender;
 	union smp_flush_state *f;
-	cpumask_t cpumask = *cpumaskp;
-
-	if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va))
-		return;
 
 	/* Caller has disabled preemption */
 	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
@@ -180,7 +176,8 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 
 	f->flush_mm = mm;
 	f->flush_va = va;
-	cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask);
+	cpumask_andnot(to_cpumask(f->flush_cpumask),
+		       cpumask, cpumask_of(smp_processor_id()));
 
 	/*
 	 * Make the above memory operations globally visible before
@@ -191,9 +188,9 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 	 * We have to send the IPI only to
 	 * CPUs affected.
 	 */
-	send_IPI_mask(&cpumask, INVALIDATE_TLB_VECTOR_START + sender);
+	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender);
 
-	while (!cpus_empty(f->flush_cpumask))
+	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
 		cpu_relax();
 
 	f->flush_mm = NULL;
@@ -201,6 +198,24 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 	spin_unlock(&f->tlbstate_lock);
 }
 
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     struct mm_struct *mm, unsigned long va)
+{
+	if (is_uv_system()) {
+		cpumask_var_t after_uv_flush;
+
+		if (alloc_cpumask_var(&after_uv_flush, GFP_ATOMIC)) {
+			cpumask_andnot(after_uv_flush,
+				       cpumask, cpumask_of(smp_processor_id()));
+			if (!uv_flush_tlb_others(after_uv_flush, mm, va))
+				flush_tlb_others_ipi(after_uv_flush, mm, va);
+			free_cpumask_var(after_uv_flush);
+			return;
+		}
+	}
+	flush_tlb_others_ipi(cpumask, mm, va);
+}
+
 static int __cpuinit init_smp_flush(void)
 {
 	int i;
@@ -215,25 +230,18 @@ core_initcall(init_smp_flush);
 void flush_tlb_current_task(void)
 {
 	struct mm_struct *mm = current->mm;
-	cpumask_t cpu_mask;
 
 	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
 
 	local_flush_tlb();
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
 	preempt_enable();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t cpu_mask;
-
 	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
 
 	if (current->active_mm == mm) {
 		if (current->mm)
@@ -241,8 +249,8 @@ void flush_tlb_mm(struct mm_struct *mm)
 		else
 			leave_mm(smp_processor_id());
 	}
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
 
 	preempt_enable();
 }
@@ -250,11 +258,8 @@ void flush_tlb_mm(struct mm_struct *mm)
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	cpumask_t cpu_mask;
 
 	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
 
 	if (current->active_mm == mm) {
 		if (current->mm)
@@ -263,8 +268,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 			leave_mm(smp_processor_id());
 	}
 
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, va);
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
 
 	preempt_enable();
 }
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index f885023167e..690dcf1a27d 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -212,11 +212,11 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
  * The cpumaskp mask contains the cpus the broadcast was sent to.
  *
  * Returns 1 if all remote flushing was done. The mask is zeroed.
- * Returns 0 if some remote flushing remains to be done. The mask is left
- * unchanged.
+ * Returns 0 if some remote flushing remains to be done. The mask will have
+ * some bits still set.
  */
 int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
-			   cpumask_t *cpumaskp)
+			   struct cpumask *cpumaskp)
 {
 	int completion_status = 0;
 	int right_shift;
@@ -263,13 +263,13 @@ int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
 	 * Success, so clear the remote cpu's from the mask so we don't
 	 * use the IPI method of shootdown on them.
 	 */
-	for_each_cpu_mask(bit, *cpumaskp) {
+	for_each_cpu(bit, cpumaskp) {
 		blade = uv_cpu_to_blade_id(bit);
 		if (blade == this_blade)
 			continue;
-		cpu_clear(bit, *cpumaskp);
+		cpumask_clear_cpu(bit, cpumaskp);
 	}
-	if (!cpus_empty(*cpumaskp))
+	if (!cpumask_empty(cpumaskp))
 		return 0;
 	return 1;
 }
@@ -296,7 +296,7 @@ int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
  * Returns 1 if all remote flushing was done.
  * Returns 0 if some remote flushing remains to be done.
  */
-int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm,
+int uv_flush_tlb_others(struct cpumask *cpumaskp, struct mm_struct *mm,
 			unsigned long va)
 {
 	int i;
@@ -315,7 +315,7 @@ int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm,
 	bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
 
 	i = 0;
-	for_each_cpu_mask(bit, *cpumaskp) {
+	for_each_cpu(bit, cpumaskp) {
 		blade = uv_cpu_to_blade_id(bit);
 		BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
 		if (blade == this_blade) {
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bea215230b2..965539ec425 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -634,35 +634,27 @@ static void xen_flush_tlb_single(unsigned long addr)
 	preempt_enable();
 }
 
-static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm,
-				 unsigned long va)
+static void xen_flush_tlb_others(const struct cpumask *cpus,
+				 struct mm_struct *mm, unsigned long va)
 {
 	struct {
 		struct mmuext_op op;
-		cpumask_t mask;
+		DECLARE_BITMAP(mask, NR_CPUS);
 	} *args;
-	cpumask_t cpumask = *cpus;
 	struct multicall_space mcs;
 
-	/*
-	 * A couple of (to be removed) sanity checks:
-	 *
-	 * - current CPU must not be in mask
-	 * - mask must exist :)
-	 */
-	BUG_ON(cpus_empty(cpumask));
-	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(cpumask_empty(cpus));
 	BUG_ON(!mm);
 
-	/* If a CPU which we ran on has gone down, OK. */
-	cpus_and(cpumask, cpumask, cpu_online_map);
-	if (cpus_empty(cpumask))
-		return;
-
 	mcs = xen_mc_entry(sizeof(*args));
 	args = mcs.args;
-	args->mask = cpumask;
-	args->op.arg2.vcpumask = &args->mask;
+	args->op.arg2.vcpumask = to_cpumask(args->mask);
+
+	/* Remove us, and any offline CPUS. */
+	cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
+	if (unlikely(cpumask_empty(to_cpumask(args->mask))))
+		goto issue;
 
 	if (va == TLB_FLUSH_ALL) {
 		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
@@ -673,6 +665,7 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm,
 
 	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
 
+issue:
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 }
 
-- 
cgit v1.2.3


From 0e21990ae7ee11af94f44f240b06e520cf1505d4 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sat, 10 Jan 2009 21:58:10 -0800
Subject: SGI UV cpumask: use static temp cpumask in flush_tlb

Impact: Improve tlb flush performance for UV

Calling alloc_cpumask_var a zillion times a second does affect
performance.  Replace with static cpumask.

Note: when CONFIG_X86_UV is defined, this extra PER_CPU memory
will be optimized out for non-UV configs as is_uv_system() will
then return a constant 0.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/kernel/tlb_64.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 38836aef51b..7a3f9891302 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -202,16 +202,17 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 			     struct mm_struct *mm, unsigned long va)
 {
 	if (is_uv_system()) {
-		cpumask_var_t after_uv_flush;
-
-		if (alloc_cpumask_var(&after_uv_flush, GFP_ATOMIC)) {
-			cpumask_andnot(after_uv_flush,
-				       cpumask, cpumask_of(smp_processor_id()));
-			if (!uv_flush_tlb_others(after_uv_flush, mm, va))
-				flush_tlb_others_ipi(after_uv_flush, mm, va);
-			free_cpumask_var(after_uv_flush);
-			return;
-		}
+		/* FIXME: could be an percpu_alloc'd thing */
+		static DEFINE_PER_CPU(cpumask_t, flush_tlb_mask);
+		struct cpumask *after_uv_flush = &get_cpu_var(flush_tlb_mask);
+
+		cpumask_andnot(after_uv_flush, cpumask,
+			       cpumask_of(smp_processor_id()));
+		if (!uv_flush_tlb_others(after_uv_flush, mm, va))
+			flush_tlb_others_ipi(after_uv_flush, mm, va);
+
+		put_cpu_var(flush_tlb_uv_cpumask);
+		return;
 	}
 	flush_tlb_others_ipi(cpumask, mm, va);
 }
-- 
cgit v1.2.3


From a1c33bbeb7061f3ed39103c385844474eaa8f921 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sat, 10 Jan 2009 21:58:10 -0800
Subject: x86: cleanup remaining cpumask_t code in mce_amd_64.c

Impact: Reduce memory usage, use new cpumask API.

Use cpumask_var_t for 'cpus' cpumask in struct threshold_bank and update
remaining old cpumask_t functions to new cpumask API.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 8ae8c4ff094..4772e91e824 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -67,7 +67,7 @@ static struct threshold_block threshold_defaults = {
 struct threshold_bank {
 	struct kobject *kobj;
 	struct threshold_block *blocks;
-	cpumask_t cpus;
+	cpumask_var_t cpus;
 };
 static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
 
@@ -481,7 +481,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 #ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
-		i = first_cpu(per_cpu(cpu_core_map, cpu));
+		i = cpumask_first(&per_cpu(cpu_core_map, cpu));
 
 		/* first core not up yet */
 		if (cpu_data(i).cpu_core_id)
@@ -501,7 +501,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (err)
 			goto out;
 
-		b->cpus = per_cpu(cpu_core_map, cpu);
+		cpumask_copy(b->cpus, &per_cpu(cpu_core_map, cpu));
 		per_cpu(threshold_banks, cpu)[bank] = b;
 		goto out;
 	}
@@ -512,15 +512,20 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		err = -ENOMEM;
 		goto out;
 	}
+	if (!alloc_cpumask_var(&b->cpus, GFP_KERNEL)) {
+		kfree(b);
+		err = -ENOMEM;
+		goto out;
+	}
 
 	b->kobj = kobject_create_and_add(name, &per_cpu(device_mce, cpu).kobj);
 	if (!b->kobj)
 		goto out_free;
 
 #ifndef CONFIG_SMP
-	b->cpus = CPU_MASK_ALL;
+	cpumask_setall(b->cpus);
 #else
-	b->cpus = per_cpu(cpu_core_map, cpu);
+	cpumask_copy(b->cpus, &per_cpu(cpu_core_map, cpu));
 #endif
 
 	per_cpu(threshold_banks, cpu)[bank] = b;
@@ -529,7 +534,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	if (err)
 		goto out_free;
 
-	for_each_cpu_mask_nr(i, b->cpus) {
+	for_each_cpu(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -545,6 +550,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 out_free:
 	per_cpu(threshold_banks, cpu)[bank] = NULL;
+	free_cpumask_var(b->cpus);
 	kfree(b);
 out:
 	return err;
@@ -619,7 +625,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #endif
 
 	/* remove all sibling symlinks before unregistering */
-	for_each_cpu_mask_nr(i, b->cpus) {
+	for_each_cpu(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -632,6 +638,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 free_out:
 	kobject_del(b->kobj);
 	kobject_put(b->kobj);
+	free_cpumask_var(b->cpus);
 	kfree(b);
 	per_cpu(threshold_banks, cpu)[bank] = NULL;
 }
-- 
cgit v1.2.3


From f9b90566cd46e19f670a1e60a717ff243f060a8a Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sat, 10 Jan 2009 21:58:10 -0800
Subject: x86: reduce stack usage in init_intel_cacheinfo

Impact: reduce stack usage.

init_intel_cacheinfo() does not use the cpumask so define a subset
of struct _cpuid4_info (_cpuid4_info_regs) that can be used instead.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/kernel/cpu/intel_cacheinfo.c | 63 ++++++++++++++++++++++++-----------
 1 file changed, 44 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 48533d77be7..58527a9fc40 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -132,7 +132,16 @@ struct _cpuid4_info {
 	union _cpuid4_leaf_ecx ecx;
 	unsigned long size;
 	unsigned long can_disable;
-	cpumask_t shared_cpu_map;	/* future?: only cpus/node is needed */
+	DECLARE_BITMAP(shared_cpu_map, NR_CPUS);
+};
+
+/* subset of above _cpuid4_info w/o shared_cpu_map */
+struct _cpuid4_info_regs {
+	union _cpuid4_leaf_eax eax;
+	union _cpuid4_leaf_ebx ebx;
+	union _cpuid4_leaf_ecx ecx;
+	unsigned long size;
+	unsigned long can_disable;
 };
 
 #ifdef CONFIG_PCI
@@ -263,7 +272,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 }
 
 static void __cpuinit
-amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf)
+amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
 {
 	if (index < 3)
 		return;
@@ -271,7 +280,8 @@ amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf)
 }
 
 static int
-__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+__cpuinit cpuid4_cache_lookup_regs(int index,
+				   struct _cpuid4_info_regs *this_leaf)
 {
 	union _cpuid4_leaf_eax 	eax;
 	union _cpuid4_leaf_ebx 	ebx;
@@ -299,6 +309,15 @@ __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 	return 0;
 }
 
+static int
+__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+{
+	struct _cpuid4_info_regs *leaf_regs =
+		(struct _cpuid4_info_regs *)this_leaf;
+
+	return cpuid4_cache_lookup_regs(index, leaf_regs);
+}
+
 static int __cpuinit find_num_cache_leaves(void)
 {
 	unsigned int		eax, ebx, ecx, edx;
@@ -338,11 +357,10 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 		 * parameters cpuid leaf to find the cache details
 		 */
 		for (i = 0; i < num_cache_leaves; i++) {
-			struct _cpuid4_info this_leaf;
-
+			struct _cpuid4_info_regs this_leaf;
 			int retval;
 
-			retval = cpuid4_cache_lookup(i, &this_leaf);
+			retval = cpuid4_cache_lookup_regs(i, &this_leaf);
 			if (retval >= 0) {
 				switch(this_leaf.eax.split.level) {
 				    case 1:
@@ -491,17 +509,20 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 	num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
 
 	if (num_threads_sharing == 1)
-		cpu_set(cpu, this_leaf->shared_cpu_map);
+		cpumask_set_cpu(cpu, to_cpumask(this_leaf->shared_cpu_map));
 	else {
 		index_msb = get_count_order(num_threads_sharing);
 
 		for_each_online_cpu(i) {
 			if (cpu_data(i).apicid >> index_msb ==
 			    c->apicid >> index_msb) {
-				cpu_set(i, this_leaf->shared_cpu_map);
+				cpumask_set_cpu(i,
+					to_cpumask(this_leaf->shared_cpu_map));
 				if (i != cpu && per_cpu(cpuid4_info, i))  {
-					sibling_leaf = CPUID4_INFO_IDX(i, index);
-					cpu_set(cpu, sibling_leaf->shared_cpu_map);
+					sibling_leaf =
+						CPUID4_INFO_IDX(i, index);
+					cpumask_set_cpu(cpu, to_cpumask(
+						sibling_leaf->shared_cpu_map));
 				}
 			}
 		}
@@ -513,9 +534,10 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	int sibling;
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
-	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
+	for_each_cpu(sibling, to_cpumask(this_leaf->shared_cpu_map)) {
 		sibling_leaf = CPUID4_INFO_IDX(sibling, index);
-		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
+		cpumask_clear_cpu(cpu,
+				  to_cpumask(sibling_leaf->shared_cpu_map));
 	}
 }
 #else
@@ -620,8 +642,9 @@ static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
 	int n = 0;
 
 	if (len > 1) {
-		cpumask_t *mask = &this_leaf->shared_cpu_map;
+		const struct cpumask *mask;
 
+		mask = to_cpumask(this_leaf->shared_cpu_map);
 		n = type?
 			cpulist_scnprintf(buf, len-2, mask) :
 			cpumask_scnprintf(buf, len-2, mask);
@@ -684,7 +707,8 @@ static struct pci_dev *get_k8_northbridge(int node)
 
 static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
 {
-	int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+	const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map);
+	int node = cpu_to_node(cpumask_first(mask));
 	struct pci_dev *dev = NULL;
 	ssize_t ret = 0;
 	int i;
@@ -718,7 +742,8 @@ static ssize_t
 store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
 		    size_t count)
 {
-	int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+	const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map);
+	int node = cpu_to_node(cpumask_first(mask));
 	struct pci_dev *dev = NULL;
 	unsigned int ret, index, val;
 
@@ -863,7 +888,7 @@ err_out:
 	return -ENOMEM;
 }
 
-static cpumask_t cache_dev_map = CPU_MASK_NONE;
+static DECLARE_BITMAP(cache_dev_map, NR_CPUS);
 
 /* Add/Remove cache interface for CPU device */
 static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
@@ -903,7 +928,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}
-	cpu_set(cpu, cache_dev_map);
+	cpumask_set_cpu(cpu, to_cpumask(cache_dev_map));
 
 	kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD);
 	return 0;
@@ -916,9 +941,9 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
 
 	if (per_cpu(cpuid4_info, cpu) == NULL)
 		return;
-	if (!cpu_isset(cpu, cache_dev_map))
+	if (!cpumask_test_cpu(cpu, to_cpumask(cache_dev_map)))
 		return;
-	cpu_clear(cpu, cache_dev_map);
+	cpumask_clear_cpu(cpu, to_cpumask(cache_dev_map));
 
 	for (i = 0; i < num_cache_leaves; i++)
 		kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
-- 
cgit v1.2.3


From 9594949b060efe86ecaa1a66839232a3b9800bc9 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sat, 10 Jan 2009 22:24:06 -0800
Subject: irq: change references from NR_IRQS to nr_irqs

Impact: preparation, cleanup, add KERN_INFO printk

Modify references from NR_IRQS to nr_irqs as the later will become
variable-sized based on nr_cpu_ids when CONFIG_SPARSE_IRQS=y.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/kernel/io_apic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 1337eab60ec..ae80638012d 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3183,7 +3183,7 @@ unsigned int create_irq_nr(unsigned int irq_want)
 
 	irq = 0;
 	spin_lock_irqsave(&vector_lock, flags);
-	for (new = irq_want; new < NR_IRQS; new++) {
+	for (new = irq_want; new < nr_irqs; new++) {
 		if (platform_legacy_irq(new))
 			continue;
 
-- 
cgit v1.2.3


From 9332fccdedf8e09448f3b69b624211ae879f6c45 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sat, 10 Jan 2009 22:24:07 -0800
Subject: irq: initialize nr_irqs based on nr_cpu_ids

Impact: Reduce memory usage.

This is the second half of the changes to make the irq_desc_ptrs be
variable sized based on nr_cpu_ids.  This is done by adding a new
"max_nr_irqs" macro to irq_vectors.h (and a dummy in irqnr.h) to
return a max NR_IRQS value based on NR_CPUS or nr_cpu_ids.

This necessitated moving the define of MAX_IO_APICS to a separate
file (asm/apicnum.h) so it could be included without the baggage
of the other asm/apicdef.h declarations.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/include/asm/apicdef.h     |  8 ++------
 arch/x86/include/asm/apicnum.h     | 12 ++++++++++++
 arch/x86/include/asm/irq_vectors.h | 16 +++++++++++-----
 3 files changed, 25 insertions(+), 11 deletions(-)
 create mode 100644 arch/x86/include/asm/apicnum.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 63134e31e8b..1a6454ef7f6 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -132,12 +132,8 @@
 #define APIC_BASE_MSR	0x800
 #define X2APIC_ENABLE	(1UL << 10)
 
-#ifdef CONFIG_X86_32
-# define MAX_IO_APICS 64
-#else
-# define MAX_IO_APICS 128
-# define MAX_LOCAL_APIC 32768
-#endif
+/* get MAX_IO_APICS */
+#include <asm/apicnum.h>
 
 /*
  * All x86-64 systems are xAPIC compatible.
diff --git a/arch/x86/include/asm/apicnum.h b/arch/x86/include/asm/apicnum.h
new file mode 100644
index 00000000000..82f613c607c
--- /dev/null
+++ b/arch/x86/include/asm/apicnum.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_APICNUM_H
+#define _ASM_X86_APICNUM_H
+
+/* define MAX_IO_APICS */
+#ifdef CONFIG_X86_32
+# define MAX_IO_APICS 64
+#else
+# define MAX_IO_APICS 128
+# define MAX_LOCAL_APIC 32768
+#endif
+
+#endif /* _ASM_X86_APICNUM_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index f7ff65032b9..602361ad0e7 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -105,6 +105,8 @@
 
 #if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER)
 
+#include <asm/apicnum.h>	/* need MAX_IO_APICS */
+
 #ifndef CONFIG_SPARSE_IRQ
 # if NR_CPUS < MAX_IO_APICS
 #  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
@@ -112,11 +114,15 @@
 #  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
 # endif
 #else
-# if (8 * NR_CPUS) > (32 * MAX_IO_APICS)
-#  define NR_IRQS (NR_VECTORS + (8 * NR_CPUS))
-# else
-#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
-# endif
+
+/* defined as a macro so nr_irqs = max_nr_irqs(nr_cpu_ids) can be used */
+# define max_nr_irqs(nr_cpus)				\
+	((8 * nr_cpus) > (32 * MAX_IO_APICS) ?		\
+		(NR_VECTORS + (8 * NR_CPUS)) :		\
+		(NR_VECTORS + (32 * MAX_IO_APICS)))	\
+
+# define NR_IRQS max_nr_irqs(NR_CPUS)
+
 #endif
 
 #elif defined(CONFIG_X86_VOYAGER)
-- 
cgit v1.2.3


From 92296c6d6e908c35fca287a21af27be814af9c75 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Sun, 11 Jan 2009 09:22:58 -0800
Subject: cpumask, irq: non-x86 build failures

Ingo Molnar wrote:

> All non-x86 architectures fail to build:
>
> In file included from /home/mingo/tip/include/linux/random.h:11,
>                  from /home/mingo/tip/include/linux/stackprotector.h:6,
>                  from /home/mingo/tip/init/main.c:17:
> /home/mingo/tip/include/linux/irqnr.h:26:63: error: asm/irq_vectors.h: No such file or directory

Do not include asm/irq_vectors.h in generic code - it's not available
on all architectures.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apicdef.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 1a6454ef7f6..63134e31e8b 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -132,8 +132,12 @@
 #define APIC_BASE_MSR	0x800
 #define X2APIC_ENABLE	(1UL << 10)
 
-/* get MAX_IO_APICS */
-#include <asm/apicnum.h>
+#ifdef CONFIG_X86_32
+# define MAX_IO_APICS 64
+#else
+# define MAX_IO_APICS 128
+# define MAX_LOCAL_APIC 32768
+#endif
 
 /*
  * All x86-64 systems are xAPIC compatible.
-- 
cgit v1.2.3


From dd3feda7748b4c2739de47daaaa387fb01926c15 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 12 Jan 2009 14:44:29 +0530
Subject: x86: microcode_intel.c fix style problems

Impact: cleanup

Fix:

 WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
 ERROR: trailing whitespace
 ERROR: "(foo*)" should be "(foo *)"

 total: 3 errors, 1 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/microcode_intel.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index b7f4c929e61..5e9f4fc5138 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -87,9 +87,9 @@
 #include <linux/cpu.h>
 #include <linux/firmware.h>
 #include <linux/platform_device.h>
+#include <linux/uaccess.h>
 
 #include <asm/msr.h>
-#include <asm/uaccess.h>
 #include <asm/processor.h>
 #include <asm/microcode.h>
 
@@ -196,7 +196,7 @@ static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
 	return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
 }
 
-static inline int 
+static inline int
 update_match_revision(struct microcode_header_intel *mc_header,	int rev)
 {
 	return (mc_header->rev <= rev) ? 0 : 1;
@@ -442,8 +442,8 @@ static int request_microcode_fw(int cpu, struct device *device)
 		return ret;
 	}
 
-	ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
-			&get_ucode_fw);
+	ret = generic_load_microcode(cpu, (void *)firmware->data,
+				     firmware->size, &get_ucode_fw);
 
 	release_firmware(firmware);
 
@@ -460,7 +460,7 @@ static int request_microcode_user(int cpu, const void __user *buf, size_t size)
 	/* We should bind the task to the CPU */
 	BUG_ON(cpu != raw_smp_processor_id());
 
-	return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
+	return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
 }
 
 static void microcode_fini_cpu(int cpu)
-- 
cgit v1.2.3


From 448dd2fa3ec915ad4325868ef8bb9b9490d9f6a9 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 12 Jan 2009 14:45:14 +0530
Subject: x86: msr.c fix style problems

Impact: cleanup

Fix:

 WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>

 total: 0 errors, 1 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/msr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 726266695b2..3cf3413ec62 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -35,10 +35,10 @@
 #include <linux/device.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
+#include <linux/uaccess.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
 static struct class *msr_class;
-- 
cgit v1.2.3


From e17029ad69c7b1518413c00f793d89bb77b8527b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 12 Jan 2009 14:46:03 +0530
Subject: x86: module_32.c fix style problems

Impact: cleanup

Fix:

 ERROR: code indent should use tabs where possible
 ERROR: trailing whitespace
 ERROR: spaces required around that '=' (ctx:VxW)

 total: 3 errors, 0 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/module_32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/module_32.c b/arch/x86/kernel/module_32.c
index 3db0a5442eb..0edd819050e 100644
--- a/arch/x86/kernel/module_32.c
+++ b/arch/x86/kernel/module_32.c
@@ -42,7 +42,7 @@ void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
 	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
+	   table entries. */
 }
 
 /* We don't need anything special. */
@@ -113,13 +113,13 @@ int module_finalize(const Elf_Ehdr *hdr,
 		*para = NULL;
 	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
-	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { 
+	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
 		if (!strcmp(".text", secstrings + s->sh_name))
 			text = s;
 		if (!strcmp(".altinstructions", secstrings + s->sh_name))
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
-			locks= s;
+			locks = s;
 		if (!strcmp(".parainstructions", secstrings + s->sh_name))
 			para = s;
 	}
-- 
cgit v1.2.3


From 3b9dc9f2f123286aaade54c45fef6723d587c664 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 12 Jan 2009 14:46:48 +0530
Subject: x86: module_64.c fix style problems

Impact: cleanup

Fix:

 ERROR: trailing whitespace
 ERROR: code indent should use tabs where possible
 WARNING: %Ld/%Lu are not-standard C, use %lld/%llu
 WARNING: printk() should include KERN_ facility level
 ERROR: spaces required around that '=' (ctx:VxW)

 total: 13 errors, 2 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/module_64.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c
index 6ba87830d4b..c23880b90b5 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module_64.c
@@ -30,14 +30,14 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 
-#define DEBUGP(fmt...) 
+#define DEBUGP(fmt...)
 
 #ifndef CONFIG_UML
 void module_free(struct module *mod, void *module_region)
 {
 	vfree(module_region);
 	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
+	   table entries. */
 }
 
 void *module_alloc(unsigned long size)
@@ -77,7 +77,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf64_Sym *sym;
 	void *loc;
-	u64 val; 
+	u64 val;
 
 	DEBUGP("Applying relocate section %u to %u\n", relsec,
 	       sechdrs[relsec].sh_info);
@@ -91,11 +91,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
 			+ ELF64_R_SYM(rel[i].r_info);
 
-	        DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n",
-		       (int)ELF64_R_TYPE(rel[i].r_info), 
-		       sym->st_value, rel[i].r_addend, (u64)loc);
+		DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n",
+			(int)ELF64_R_TYPE(rel[i].r_info),
+			sym->st_value, rel[i].r_addend, (u64)loc);
 
-		val = sym->st_value + rel[i].r_addend; 
+		val = sym->st_value + rel[i].r_addend;
 
 		switch (ELF64_R_TYPE(rel[i].r_info)) {
 		case R_X86_64_NONE:
@@ -113,16 +113,16 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			if ((s64)val != *(s32 *)loc)
 				goto overflow;
 			break;
-		case R_X86_64_PC32: 
+		case R_X86_64_PC32:
 			val -= (u64)loc;
 			*(u32 *)loc = val;
 #if 0
 			if ((s64)val != *(s32 *)loc)
-				goto overflow; 
+				goto overflow;
 #endif
 			break;
 		default:
-			printk(KERN_ERR "module %s: Unknown rela relocation: %Lu\n",
+			printk(KERN_ERR "module %s: Unknown rela relocation: %llu\n",
 			       me->name, ELF64_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
@@ -130,7 +130,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 	return 0;
 
 overflow:
-	printk(KERN_ERR "overflow in relocation type %d val %Lx\n", 
+	printk(KERN_ERR "overflow in relocation type %d val %Lx\n",
 	       (int)ELF64_R_TYPE(rel[i].r_info), val);
 	printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n",
 	       me->name);
@@ -143,13 +143,13 @@ int apply_relocate(Elf_Shdr *sechdrs,
 		   unsigned int relsec,
 		   struct module *me)
 {
-	printk("non add relocation not supported\n");
+	printk(KERN_ERR "non add relocation not supported\n");
 	return -ENOSYS;
-} 
+}
 
 int module_finalize(const Elf_Ehdr *hdr,
-                    const Elf_Shdr *sechdrs,
-                    struct module *me)
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
 {
 	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
 		*para = NULL;
@@ -161,7 +161,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		if (!strcmp(".altinstructions", secstrings + s->sh_name))
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
-			locks= s;
+			locks = s;
 		if (!strcmp(".parainstructions", secstrings + s->sh_name))
 			para = s;
 	}
-- 
cgit v1.2.3


From 42bb8cc5e81028e217105299001070d57eb84ad7 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Fri, 9 Jan 2009 12:17:40 -0800
Subject: x86: hpet: allow force enable on ICH10 HPET

Intel "Smackover" x58 BIOS don't have HPET enabled in the BIOS, so allow
to force enable it at least.  The register layout is the same as in other
recent ICHs, so all the code can be reused.

Using numerical PCI-ID because it's unlikely the PCI-ID will be used
anywhere else.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/quirks.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 309949e9e1c..697d1b78cfb 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -172,7 +172,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
 			 ich_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
 			 ich_force_enable_hpet);
-
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16,	/* ICH10 */
+			 ich_force_enable_hpet);
 
 static struct pci_dev *cached_dev;
 
-- 
cgit v1.2.3


From 0b0f0b1c2c87de299df6f92a8ffc0a73bd1bb960 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 11 Jan 2009 13:35:56 -0800
Subject: sparseirq: use kstat_irqs_cpu on non-x86 architectures too

so we could move kstat_irqs array to irq_desc struct.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/alpha/kernel/irq.c       | 2 +-
 arch/alpha/kernel/irq_alpha.c | 2 +-
 arch/arm/kernel/irq.c         | 2 +-
 arch/arm/mach-ns9xxx/irq.c    | 3 +--
 arch/avr32/kernel/irq.c       | 2 +-
 arch/cris/kernel/irq.c        | 2 +-
 arch/mips/kernel/irq.c        | 2 +-
 7 files changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 703731accda..430550bd1eb 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -90,7 +90,7 @@ show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(irq));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[irq]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[irq].chip->typename);
 		seq_printf(p, "  %c%s",
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index e16aeb6e79e..67c19f8a994 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -64,7 +64,7 @@ do_entInt(unsigned long type, unsigned long vector,
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
-		        kstat_cpu(cpu).irqs[RTC_IRQ]++;
+		        kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ));
 		} else {
 			handle_irq(RTC_IRQ);
 		}
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 7141cee1fab..a285e4a636a 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -76,7 +76,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 		seq_printf(p, "%3d: ", i);
 		for_each_present_cpu(cpu)
-			seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
 		seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 22e0eb6e9ec..feb0e54a91d 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -63,7 +63,6 @@ static struct irq_chip ns9xxx_chip = {
 #else
 static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned int cpu = smp_processor_id();
 	struct irqaction *action;
 	irqreturn_t action_ret;
 
@@ -72,7 +71,7 @@ static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 	BUG_ON(desc->status & IRQ_INPROGRESS);
 
 	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
-	kstat_cpu(cpu).irqs[irq]++;
+	kstat_incr_irqs_this_cpu(irq, desc);
 
 	action = desc->action;
 	if (unlikely(!action || (desc->status & IRQ_DISABLED)))
diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
index a8e767d836a..9f572229d31 100644
--- a/arch/avr32/kernel/irq.c
+++ b/arch/avr32/kernel/irq.c
@@ -58,7 +58,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 		seq_printf(p, "%3d: ", i);
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
 		seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 2dfac8c7909..7f642fcffbf 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -66,7 +66,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->typename);
 		seq_printf(p, "  %s", action->name);
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 98f336dc3cd..7b845ba9dff 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -108,7 +108,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(i, j));
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
-- 
cgit v1.2.3


From e65e49d0f3714f4a6a42f6f6a19926ba33fcda75 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Mon, 12 Jan 2009 15:27:13 -0800
Subject: irq: update all arches for new irq_desc

Impact: cleanup, update to new cpumask API

Irq_desc.affinity and irq_desc.pending_mask are now cpumask_var_t's
so access to them should be using the new cpumask API.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/alpha/kernel/irq.c               |  2 +-
 arch/arm/kernel/irq.c                 | 18 ++++++++++++------
 arch/arm/oprofile/op_model_mpcore.c   |  2 +-
 arch/blackfin/kernel/irqchip.c        |  5 +++++
 arch/ia64/kernel/iosapic.c            |  2 +-
 arch/ia64/kernel/irq.c                |  4 ++--
 arch/ia64/kernel/msi_ia64.c           |  4 ++--
 arch/ia64/sn/kernel/msi_sn.c          |  2 +-
 arch/mips/include/asm/irq.h           |  2 +-
 arch/mips/kernel/irq-gic.c            |  2 +-
 arch/mips/kernel/smtc.c               |  2 +-
 arch/mips/mti-malta/malta-smtc.c      |  5 +++--
 arch/parisc/kernel/irq.c              |  8 ++++----
 arch/powerpc/kernel/irq.c             |  2 +-
 arch/powerpc/platforms/pseries/xics.c |  5 +++--
 arch/powerpc/sysdev/mpic.c            |  3 ++-
 arch/sparc/kernel/irq_64.c            |  5 +++--
 17 files changed, 44 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 703731accda..7bc7489223f 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -55,7 +55,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 	irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu));
 	return 0;
 }
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 7141cee1fab..4bb723eadad 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -104,6 +104,11 @@ static struct irq_desc bad_irq_desc = {
 	.lock = SPIN_LOCK_UNLOCKED
 };
 
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* We are not allocating bad_irq_desc.affinity or .pending_mask */
+#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
+#endif
+
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -161,7 +166,7 @@ void __init init_IRQ(void)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
 #ifdef CONFIG_SMP
-	bad_irq_desc.affinity = CPU_MASK_ALL;
+	cpumask_setall(bad_irq_desc.affinity);
 	bad_irq_desc.cpu = smp_processor_id();
 #endif
 	init_arch_irq();
@@ -191,15 +196,16 @@ void migrate_irqs(void)
 		struct irq_desc *desc = irq_desc + i;
 
 		if (desc->cpu == cpu) {
-			unsigned int newcpu = any_online_cpu(desc->affinity);
-
-			if (newcpu == NR_CPUS) {
+			unsigned int newcpu = cpumask_any_and(desc->affinity,
+							      cpu_online_mask);
+			if (newcpu >= nr_cpu_ids) {
 				if (printk_ratelimit())
 					printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
 					       i, cpu);
 
-				cpus_setall(desc->affinity);
-				newcpu = any_online_cpu(desc->affinity);
+				cpumask_setall(desc->affinity);
+				newcpu = cpumask_any_and(desc->affinity,
+							 cpu_online_mask);
 			}
 
 			route_irq(desc, i, newcpu);
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 6d6bd589924..853d42bb868 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -263,7 +263,7 @@ static void em_route_irq(int irq, unsigned int cpu)
 	const struct cpumask *mask = cpumask_of(cpu);
 
 	spin_lock_irq(&desc->lock);
-	desc->affinity = *mask;
+	cpumask_copy(desc->affinity, mask);
 	desc->chip->set_affinity(irq, mask);
 	spin_unlock_irq(&desc->lock);
 }
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index ab8209cbbad..5780d6df154 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -69,6 +69,11 @@ static struct irq_desc bad_irq_desc = {
 #endif
 };
 
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* We are not allocating a variable-sized bad_irq_desc.affinity */
+#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
+#endif
+
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, j;
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 5cfd3d91001..006ad366a45 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -880,7 +880,7 @@ iosapic_unregister_intr (unsigned int gsi)
 	if (iosapic_intr_info[irq].count == 0) {
 #ifdef CONFIG_SMP
 		/* Clear affinity */
-		cpus_setall(idesc->affinity);
+		cpumask_setall(idesc->affinity);
 #endif
 		/* Clear the interrupt information */
 		iosapic_intr_info[irq].dest = 0;
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index a58f64ca9f0..226233a6fa1 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -103,7 +103,7 @@ static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 };
 void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
 {
 	if (irq < NR_IRQS) {
-		cpumask_copy(&irq_desc[irq].affinity,
+		cpumask_copy(irq_desc[irq].affinity,
 			     cpumask_of(cpu_logical_id(hwid)));
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
@@ -148,7 +148,7 @@ static void migrate_irqs(void)
 		if (desc->status == IRQ_PER_CPU)
 			continue;
 
-		if (cpumask_any_and(&irq_desc[irq].affinity, cpu_online_mask)
+		if (cpumask_any_and(irq_desc[irq].affinity, cpu_online_mask)
 		    >= nr_cpu_ids) {
 			/*
 			 * Save it for phase 2 processing
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 89033933903..dcb6b7c51ea 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -75,7 +75,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 	msg.data = data;
 
 	write_msi_msg(irq, &msg);
-	irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 }
 #endif /* CONFIG_SMP */
 
@@ -187,7 +187,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 	msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu));
 
 	dmar_msi_write(irq, &msg);
-	irq_desc[irq].affinity = *mask;
+	cpumask_copy(irq_desc[irq].affinity, mask);
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c
index ca553b0429c..81e428943d7 100644
--- a/arch/ia64/sn/kernel/msi_sn.c
+++ b/arch/ia64/sn/kernel/msi_sn.c
@@ -205,7 +205,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
 
 	write_msi_msg(irq, &msg);
-	irq_desc[irq].affinity = *cpu_mask;
+	cpumask_copy(irq_desc[irq].affinity, cpu_mask);
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index abc62aa744a..3214ade02d1 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -66,7 +66,7 @@ extern void smtc_forward_irq(unsigned int irq);
  */
 #define IRQ_AFFINITY_HOOK(irq)						\
 do {									\
-    if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) {	\
+    if (!cpumask_test_cpu(smp_processor_id(), irq_desc[irq].affinity)) {\
 	smtc_forward_irq(irq);						\
 	irq_exit();							\
 	return;								\
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 494a49a317e..87deb8f6c45 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -187,7 +187,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 		set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
 
 	}
-	irq_desc[irq].affinity = *cpumask;
+	cpumask_copy(irq_desc[irq].affinity, cpumask);
 	spin_unlock_irqrestore(&gic_lock, flags);
 
 }
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index b6cca01ff82..d2c1ab12425 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -686,7 +686,7 @@ void smtc_forward_irq(unsigned int irq)
 	 * and efficiency, we just pick the easiest one to find.
 	 */
 
-	target = first_cpu(irq_desc[irq].affinity);
+	target = cpumask_first(irq_desc[irq].affinity);
 
 	/*
 	 * We depend on the platform code to have correctly processed
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index aabd7274507..5ba31888fef 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -116,7 +116,7 @@ struct plat_smp_ops msmtc_smp_ops = {
 
 void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 {
-	cpumask_t tmask = *affinity;
+	cpumask_t tmask;
 	int cpu = 0;
 	void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff);
 
@@ -139,11 +139,12 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 	 * be made to forward to an offline "CPU".
 	 */
 
+	cpumask_copy(&tmask, affinity);
 	for_each_cpu(cpu, affinity) {
 		if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu))
 			cpu_clear(cpu, tmask);
 	}
-	irq_desc[irq].affinity = tmask;
+	cpumask_copy(irq_desc[irq].affinity, &tmask);
 
 	if (cpus_empty(tmask))
 		/*
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index ac2c822928c..49482806863 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		irq_desc[irq].affinity = CPU_MASK_ALL;
+		cpumask_setall(irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
@@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 	if (cpu_check_affinity(irq, dest))
 		return;
 
-	irq_desc[irq].affinity = *dest;
+	cpumask_copy(irq_desc[irq].affinity, dest);
 }
 #endif
 
@@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide)
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	dest = irq_desc[irq].affinity;
+	cpumask_copy(&dest, irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 23b8b5e36f9..ad1e5ac721d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -231,7 +231,7 @@ void fixup_irqs(cpumask_t map)
 		if (irq_desc[irq].status & IRQ_PER_CPU)
 			continue;
 
-		cpus_and(mask, irq_desc[irq].affinity, map);
+		cpumask_and(&mask, irq_desc[irq].affinity, &map);
 		if (any_online_cpu(mask) == NR_CPUS) {
 			printk("Breaking affinity for irq %i\n", irq);
 			mask = map;
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 84e058f1e1c..80b513449f4 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -153,9 +153,10 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check)
 {
 	int server;
 	/* For the moment only implement delivery to all cpus or one cpu */
-	cpumask_t cpumask = irq_desc[virq].affinity;
+	cpumask_t cpumask;
 	cpumask_t tmp = CPU_MASK_NONE;
 
+	cpumask_copy(&cpumask, irq_desc[virq].affinity);
 	if (!distribute_irqs)
 		return default_server;
 
@@ -869,7 +870,7 @@ void xics_migrate_irqs_away(void)
 		       virq, cpu);
 
 		/* Reset affinity to all cpus */
-		irq_desc[virq].affinity = CPU_MASK_ALL;
+		cpumask_setall(irq_desc[virq].affinity);
 		desc->chip->set_affinity(virq, cpu_all_mask);
 unlock:
 		spin_unlock_irqrestore(&desc->lock, flags);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3e0d89dcdba..0afd21f9a22 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -566,9 +566,10 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 #ifdef CONFIG_SMP
 static int irq_choose_cpu(unsigned int virt_irq)
 {
-	cpumask_t mask = irq_desc[virt_irq].affinity;
+	cpumask_t mask;
 	int cpuid;
 
+	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
 	if (cpus_equal(mask, CPU_MASK_ALL)) {
 		static int irq_rover;
 		static DEFINE_SPINLOCK(irq_rover_lock);
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index cab8e028687..4ac5c651e00 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -247,9 +247,10 @@ struct irq_handler_data {
 #ifdef CONFIG_SMP
 static int irq_choose_cpu(unsigned int virt_irq)
 {
-	cpumask_t mask = irq_desc[virt_irq].affinity;
+	cpumask_t mask;
 	int cpuid;
 
+	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
 	if (cpus_equal(mask, CPU_MASK_ALL)) {
 		static int irq_rover;
 		static DEFINE_SPINLOCK(irq_rover_lock);
@@ -854,7 +855,7 @@ void fixup_irqs(void)
 		    !(irq_desc[irq].status & IRQ_PER_CPU)) {
 			if (irq_desc[irq].chip->set_affinity)
 				irq_desc[irq].chip->set_affinity(irq,
-					&irq_desc[irq].affinity);
+					irq_desc[irq].affinity);
 		}
 		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
 	}
-- 
cgit v1.2.3


From 4a046d1754ee6ebb6f399696805ed61ea0444d4c Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 12 Jan 2009 17:39:24 -0800
Subject: x86: arch_probe_nr_irqs

Impact: save RAM with large NR_CPUS, get smaller nr_irqs

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/include/asm/irq_vectors.h |  7 ++-----
 arch/x86/kernel/io_apic.c          | 16 ++++++++++++++++
 2 files changed, 18 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 602361ad0e7..a16a2ab2b42 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -115,14 +115,11 @@
 # endif
 #else
 
-/* defined as a macro so nr_irqs = max_nr_irqs(nr_cpu_ids) can be used */
-# define max_nr_irqs(nr_cpus)				\
-	((8 * nr_cpus) > (32 * MAX_IO_APICS) ?		\
+# define NR_IRQS					\
+	((8 * NR_CPUS) > (32 * MAX_IO_APICS) ?		\
 		(NR_VECTORS + (8 * NR_CPUS)) :		\
 		(NR_VECTORS + (32 * MAX_IO_APICS)))	\
 
-# define NR_IRQS max_nr_irqs(NR_CPUS)
-
 #endif
 
 #elif defined(CONFIG_X86_VOYAGER)
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index ae80638012d..157986916cd 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3850,6 +3850,22 @@ void __init probe_nr_irqs_gsi(void)
 		nr_irqs_gsi = nr;
 }
 
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	int nr;
+
+	nr = ((8 * nr_cpu_ids) > (32 * nr_ioapics) ?
+		(NR_VECTORS + (8 * nr_cpu_ids)) :
+		(NR_VECTORS + (32 * nr_ioapics)));
+
+	if (nr < nr_irqs && nr > nr_irqs_gsi)
+		nr_irqs = nr;
+
+	return 0;
+}
+#endif
+
 /* --------------------------------------------------------------------------
                           ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
-- 
cgit v1.2.3


From a4a0acf8e17e3d08e28b721ceceb898fbc959ceb Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Tue, 13 Jan 2009 18:43:03 -0800
Subject: x86: fix broken flush_tlb_others_ipi()

This commit broke flush_tlb_others_ipi() causing boot hangs on a
16 logical cpu system:

>	commit 4595f9620cda8a1e973588e743cf5f8436dd20c6
>	Author: Rusty Russell <rusty@rustcorp.com.au>
>	Date:   Sat Jan 10 21:58:09 2009 -0800
>
>	    x86: change flush_tlb_others to take a const struct cpumask

This change resulted in sending the invalidate tlb vector to the
sender itself causing the hang. flush_tlb_others_ipi() should exclude
the sender itself from the destination list.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 7a3f9891302..54ee2ecb5e2 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -188,7 +188,7 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 	 * We have to send the IPI only to
 	 * CPUs affected.
 	 */
-	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender);
+	send_IPI_mask(f->flush_cpumask, INVALIDATE_TLB_VECTOR_START + sender);
 
 	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
 		cpu_relax();
-- 
cgit v1.2.3


From b5ba7e6d1e7e2ac808afd21be1e56dc34caf20e6 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 12 Jan 2009 17:46:17 +0530
Subject: x86: replacing mp_config_ioapic with mpc_ioapic

Impact: cleanup, solve 80 columns wrap problems

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/io_apic.h | 10 +------
 arch/x86/kernel/acpi/boot.c    | 28 ++++++++++----------
 arch/x86/kernel/io_apic.c      | 60 ++++++++++++++++++++----------------------
 arch/x86/kernel/mpparse.c      | 12 ++++-----
 4 files changed, 50 insertions(+), 60 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 7a1f44ac1f1..5a56ae9b505 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -120,14 +120,6 @@ extern int nr_ioapic_registers[MAX_IO_APICS];
 
 #define MP_MAX_IOAPIC_PIN 127
 
-struct mp_config_ioapic {
-	unsigned long mp_apicaddr;
-	unsigned int mp_apicid;
-	unsigned char mp_type;
-	unsigned char mp_apicver;
-	unsigned char mp_flags;
-};
-
 struct mp_config_intsrc {
 	unsigned int mp_dstapic;
 	unsigned char mp_type;
@@ -139,7 +131,7 @@ struct mp_config_intsrc {
 };
 
 /* I/O APIC entries */
-extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
+extern struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 
 /* # of MP IRQ source entries */
 extern int mp_irq_entries;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index d37593c2f43..2b27019e64f 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -912,8 +912,8 @@ static u8 __init uniq_ioapic_id(u8 id)
 	DECLARE_BITMAP(used, 256);
 	bitmap_zero(used, 256);
 	for (i = 0; i < nr_ioapics; i++) {
-		struct mp_config_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->mp_apicid, used);
+		struct mpc_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->apicid, used);
 	}
 	if (!test_bit(id, used))
 		return id;
@@ -945,29 +945,29 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 
 	idx = nr_ioapics;
 
-	mp_ioapics[idx].mp_type = MP_IOAPIC;
-	mp_ioapics[idx].mp_flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].mp_apicaddr = address;
+	mp_ioapics[idx].type = MP_IOAPIC;
+	mp_ioapics[idx].flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].apicaddr = address;
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id);
+	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
 #ifdef CONFIG_X86_32
-	mp_ioapics[idx].mp_apicver = io_apic_get_version(idx);
+	mp_ioapics[idx].apicver = io_apic_get_version(idx);
 #else
-	mp_ioapics[idx].mp_apicver = 0;
+	mp_ioapics[idx].apicver = 0;
 #endif
 	/*
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid;
+	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
 	mp_ioapic_routing[idx].gsi_base = gsi_base;
 	mp_ioapic_routing[idx].gsi_end = gsi_base +
 	    io_apic_get_redir_entries(idx);
 
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid,
-	       mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr,
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
 	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
 
 	nr_ioapics++;
@@ -1026,7 +1026,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	mp_irq.mp_irqflag = (trigger << 2) | polarity;
 	mp_irq.mp_srcbus = MP_ISA_BUS;
 	mp_irq.mp_srcbusirq = bus_irq;	/* IRQ */
-	mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */
+	mp_irq.mp_dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
 	mp_irq.mp_dstirq = pin;	/* INTIN# */
 
 	save_mp_irq(&mp_irq);
@@ -1062,7 +1062,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	ioapic = mp_find_ioapic(0);
 	if (ioapic < 0)
 		return;
-	dstapic = mp_ioapics[ioapic].mp_apicid;
+	dstapic = mp_ioapics[ioapic].apicid;
 
 	/*
 	 * Use the default configuration for the IRQs 0-15.  Unless
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 109c91db202..6c51ecdfbf4 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -83,7 +83,7 @@ static DEFINE_SPINLOCK(vector_lock);
 int nr_ioapic_registers[MAX_IO_APICS];
 
 /* I/O APIC entries */
-struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
@@ -387,7 +387,7 @@ struct io_apic {
 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 {
 	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
+		+ (mp_ioapics[idx].apicaddr & ~PAGE_MASK);
 }
 
 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -946,7 +946,7 @@ static int find_irq_entry(int apic, int pin, int type)
 
 	for (i = 0; i < mp_irq_entries; i++)
 		if (mp_irqs[i].mp_irqtype == type &&
-		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].apicid ||
 		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
 		    mp_irqs[i].mp_dstirq == pin)
 			return i;
@@ -988,7 +988,7 @@ static int __init find_isa_irq_apic(int irq, int type)
 	if (i < mp_irq_entries) {
 		int apic;
 		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].mp_dstapic)
 				return apic;
 		}
 	}
@@ -1016,7 +1016,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 		int lbus = mp_irqs[i].mp_srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+			if (mp_ioapics[apic].apicid == mp_irqs[i].mp_dstapic ||
 			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
 				break;
 
@@ -1567,14 +1567,14 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_de
 	apic_printk(APIC_VERBOSE,KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
 		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
+		    apic, mp_ioapics[apic].apicid, pin, cfg->vector,
 		    irq, trigger, polarity);
 
 
-	if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
+	if (setup_ioapic_entry(mp_ioapics[apic].apicid, irq, &entry,
 			       dest, trigger, polarity, cfg->vector)) {
 		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
-		       mp_ioapics[apic].mp_apicid, pin);
+		       mp_ioapics[apic].apicid, pin);
 		__clear_irq_vector(irq, cfg);
 		return;
 	}
@@ -1605,12 +1605,10 @@ static void __init setup_IO_APIC_irqs(void)
 					notcon = 1;
 					apic_printk(APIC_VERBOSE,
 						KERN_DEBUG " %d-%d",
-						mp_ioapics[apic].mp_apicid,
-						pin);
+						mp_ioapics[apic].apicid, pin);
 				} else
 					apic_printk(APIC_VERBOSE, " %d-%d",
-						mp_ioapics[apic].mp_apicid,
-						pin);
+						mp_ioapics[apic].apicid, pin);
 				continue;
 			}
 			if (notcon) {
@@ -1700,7 +1698,7 @@ __apicdebuginit(void) print_IO_APIC(void)
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
+		       mp_ioapics[i].apicid, nr_ioapic_registers[i]);
 
 	/*
 	 * We are a bit conservative about what we expect.  We have to
@@ -1720,7 +1718,7 @@ __apicdebuginit(void) print_IO_APIC(void)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].apicid);
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
 	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
@@ -2122,14 +2120,14 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		reg_00.raw = io_apic_read(apic, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
-		old_id = mp_ioapics[apic].mp_apicid;
+		old_id = mp_ioapics[apic].apicid;
 
-		if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
+		if (mp_ioapics[apic].apicid >= get_physical_broadcast()) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic, mp_ioapics[apic].mp_apicid);
+				apic, mp_ioapics[apic].apicid);
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				reg_00.bits.ID);
-			mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
+			mp_ioapics[apic].apicid = reg_00.bits.ID;
 		}
 
 		/*
@@ -2138,9 +2136,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
 		if (check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic].mp_apicid)) {
+					mp_ioapics[apic].apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic, mp_ioapics[apic].mp_apicid);
+				apic, mp_ioapics[apic].apicid);
 			for (i = 0; i < get_physical_broadcast(); i++)
 				if (!physid_isset(i, phys_id_present_map))
 					break;
@@ -2149,13 +2147,13 @@ static void __init setup_ioapic_ids_from_mpc(void)
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				i);
 			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic].mp_apicid = i;
+			mp_ioapics[apic].apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
+			tmp = apicid_to_cpu_present(mp_ioapics[apic].apicid);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
-					mp_ioapics[apic].mp_apicid);
+					mp_ioapics[apic].apicid);
 			physids_or(phys_id_present_map, phys_id_present_map, tmp);
 		}
 
@@ -2164,11 +2162,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * We need to adjust the IRQ routing table
 		 * if the ID changed.
 		 */
-		if (old_id != mp_ioapics[apic].mp_apicid)
+		if (old_id != mp_ioapics[apic].apicid)
 			for (i = 0; i < mp_irq_entries; i++)
 				if (mp_irqs[i].mp_dstapic == old_id)
 					mp_irqs[i].mp_dstapic
-						= mp_ioapics[apic].mp_apicid;
+						= mp_ioapics[apic].apicid;
 
 		/*
 		 * Read the right value from the MPC table and
@@ -2176,9 +2174,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 */
 		apic_printk(APIC_VERBOSE, KERN_INFO
 			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic].mp_apicid);
+			mp_ioapics[apic].apicid);
 
-		reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
+		reg_00.bits.ID = mp_ioapics[apic].apicid;
 		spin_lock_irqsave(&ioapic_lock, flags);
 		io_apic_write(apic, 0, reg_00.raw);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -2189,7 +2187,7 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
+		if (reg_00.bits.ID != mp_ioapics[apic].apicid)
 			printk("could not set ID!\n");
 		else
 			apic_printk(APIC_VERBOSE, " ok.\n");
@@ -3118,8 +3116,8 @@ static int ioapic_resume(struct sys_device *dev)
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
+	if (reg_00.bits.ID != mp_ioapics[dev->id].apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].apicid;
 		io_apic_write(dev->id, 0, reg_00.raw);
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -4101,7 +4099,7 @@ void __init ioapic_init_mappings(void)
 	ioapic_res = ioapic_setup_resources();
 	for (i = 0; i < nr_ioapics; i++) {
 		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].mp_apicaddr;
+			ioapic_phys = mp_ioapics[i].apicaddr;
 #ifdef CONFIG_X86_32
 			if (!ioapic_phys) {
 				printk(KERN_ERR
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 8385d4e7e15..a86a6553743 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -143,11 +143,11 @@ static void __init MP_ioapic_info(struct mpc_ioapic *m)
 	if (bad_ioapic(m->apicaddr))
 		return;
 
-	mp_ioapics[nr_ioapics].mp_apicaddr = m->apicaddr;
-	mp_ioapics[nr_ioapics].mp_apicid = m->apicid;
-	mp_ioapics[nr_ioapics].mp_type = m->type;
-	mp_ioapics[nr_ioapics].mp_apicver = m->apicver;
-	mp_ioapics[nr_ioapics].mp_flags = m->flags;
+	mp_ioapics[nr_ioapics].apicaddr = m->apicaddr;
+	mp_ioapics[nr_ioapics].apicid = m->apicid;
+	mp_ioapics[nr_ioapics].type = m->type;
+	mp_ioapics[nr_ioapics].apicver = m->apicver;
+	mp_ioapics[nr_ioapics].flags = m->flags;
 	nr_ioapics++;
 }
 
@@ -416,7 +416,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	intsrc.type = MP_INTSRC;
 	intsrc.irqflag = 0;	/* conforming */
 	intsrc.srcbus = 0;
-	intsrc.dstapic = mp_ioapics[0].mp_apicid;
+	intsrc.dstapic = mp_ioapics[0].apicid;
 
 	intsrc.irqtype = mp_INT;
 
-- 
cgit v1.2.3


From c2c21745ecba23c74690a124bcd371f83bd71e45 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 12 Jan 2009 17:47:22 +0530
Subject: x86: replacing mp_config_intsrc with mpc_intsrc

Impact: cleanup, solve 80 columns wrap problems

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/io_apic.h | 16 +---------
 arch/x86/kernel/acpi/boot.c    | 70 ++++++++++++++++++++----------------------
 arch/x86/kernel/io_apic.c      | 64 +++++++++++++++++++-------------------
 arch/x86/kernel/mpparse.c      | 68 ++++++++++++++++++++--------------------
 4 files changed, 101 insertions(+), 117 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 5a56ae9b505..08ec793aa04 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -114,22 +114,8 @@ struct IR_IO_APIC_route_entry {
 extern int nr_ioapics;
 extern int nr_ioapic_registers[MAX_IO_APICS];
 
-/*
- * MP-BIOS irq configuration table structures:
- */
-
 #define MP_MAX_IOAPIC_PIN 127
 
-struct mp_config_intsrc {
-	unsigned int mp_dstapic;
-	unsigned char mp_type;
-	unsigned char mp_irqtype;
-	unsigned short mp_irqflag;
-	unsigned char mp_srcbus;
-	unsigned char mp_srcbusirq;
-	unsigned char mp_dstirq;
-};
-
 /* I/O APIC entries */
 extern struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 
@@ -137,7 +123,7 @@ extern struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 extern int mp_irq_entries;
 
 /* MP IRQ source entries */
-extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+extern struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* non-0 if default (table-less) MP configuration */
 extern int mpc_default_type;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2b27019e64f..4cb5964f149 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -973,19 +973,19 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	nr_ioapics++;
 }
 
-static void assign_to_mp_irq(struct mp_config_intsrc *m,
-				    struct mp_config_intsrc *mp_irq)
+static void assign_to_mp_irq(struct mpc_intsrc *m,
+				    struct mpc_intsrc *mp_irq)
 {
-	memcpy(mp_irq, m, sizeof(struct mp_config_intsrc));
+	memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
 }
 
-static int mp_irq_cmp(struct mp_config_intsrc *mp_irq,
-				struct mp_config_intsrc *m)
+static int mp_irq_cmp(struct mpc_intsrc *mp_irq,
+				struct mpc_intsrc *m)
 {
-	return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc));
+	return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
 }
 
-static void save_mp_irq(struct mp_config_intsrc *m)
+static void save_mp_irq(struct mpc_intsrc *m)
 {
 	int i;
 
@@ -1003,7 +1003,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 {
 	int ioapic;
 	int pin;
-	struct mp_config_intsrc mp_irq;
+	struct mpc_intsrc mp_irq;
 
 	/*
 	 * Convert 'gsi' to 'ioapic.pin'.
@@ -1021,13 +1021,13 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	if ((bus_irq == 0) && (trigger == 3))
 		trigger = 1;
 
-	mp_irq.mp_type = MP_INTSRC;
-	mp_irq.mp_irqtype = mp_INT;
-	mp_irq.mp_irqflag = (trigger << 2) | polarity;
-	mp_irq.mp_srcbus = MP_ISA_BUS;
-	mp_irq.mp_srcbusirq = bus_irq;	/* IRQ */
-	mp_irq.mp_dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
-	mp_irq.mp_dstirq = pin;	/* INTIN# */
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger << 2) | polarity;
+	mp_irq.srcbus = MP_ISA_BUS;
+	mp_irq.srcbusirq = bus_irq;	/* IRQ */
+	mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
+	mp_irq.dstirq = pin;	/* INTIN# */
 
 	save_mp_irq(&mp_irq);
 }
@@ -1037,7 +1037,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	int i;
 	int ioapic;
 	unsigned int dstapic;
-	struct mp_config_intsrc mp_irq;
+	struct mpc_intsrc mp_irq;
 
 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
 	/*
@@ -1072,16 +1072,14 @@ void __init mp_config_acpi_legacy_irqs(void)
 		int idx;
 
 		for (idx = 0; idx < mp_irq_entries; idx++) {
-			struct mp_config_intsrc *irq = mp_irqs + idx;
+			struct mpc_intsrc *irq = mp_irqs + idx;
 
 			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mp_srcbus == MP_ISA_BUS
-			    && irq->mp_srcbusirq == i)
+			if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
 				break;
 
 			/* Do we already have a mapping for this IOAPIC pin */
-			if (irq->mp_dstapic == dstapic &&
-			    irq->mp_dstirq == i)
+			if (irq->dstapic == dstapic && irq->dstirq == i)
 				break;
 		}
 
@@ -1090,13 +1088,13 @@ void __init mp_config_acpi_legacy_irqs(void)
 			continue;	/* IRQ already used */
 		}
 
-		mp_irq.mp_type = MP_INTSRC;
-		mp_irq.mp_irqflag = 0;	/* Conforming */
-		mp_irq.mp_srcbus = MP_ISA_BUS;
-		mp_irq.mp_dstapic = dstapic;
-		mp_irq.mp_irqtype = mp_INT;
-		mp_irq.mp_srcbusirq = i; /* Identity mapped */
-		mp_irq.mp_dstirq = i;
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqflag = 0;	/* Conforming */
+		mp_irq.srcbus = MP_ISA_BUS;
+		mp_irq.dstapic = dstapic;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.srcbusirq = i; /* Identity mapped */
+		mp_irq.dstirq = i;
 
 		save_mp_irq(&mp_irq);
 	}
@@ -1207,22 +1205,22 @@ int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 			u32 gsi, int triggering, int polarity)
 {
 #ifdef CONFIG_X86_MPPARSE
-	struct mp_config_intsrc mp_irq;
+	struct mpc_intsrc mp_irq;
 	int ioapic;
 
 	if (!acpi_ioapic)
 		return 0;
 
 	/* print the entry should happen on mptable identically */
-	mp_irq.mp_type = MP_INTSRC;
-	mp_irq.mp_irqtype = mp_INT;
-	mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
 				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
-	mp_irq.mp_srcbus = number;
-	mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	mp_irq.srcbus = number;
+	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
 	ioapic = mp_find_ioapic(gsi);
-	mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id;
-	mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
+	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+	mp_irq.dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
 	save_mp_irq(&mp_irq);
 #endif
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 6c51ecdfbf4..79b8c0c72d3 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -87,7 +87,7 @@ struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
-struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
@@ -945,10 +945,10 @@ static int find_irq_entry(int apic, int pin, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == type &&
-		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].apicid ||
-		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mp_dstirq == pin)
+		if (mp_irqs[i].irqtype == type &&
+		    (mp_irqs[i].dstapic == mp_ioapics[apic].apicid ||
+		     mp_irqs[i].dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].dstirq == pin)
 			return i;
 
 	return -1;
@@ -962,13 +962,13 @@ static int __init find_isa_irq_pin(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
+		int lbus = mp_irqs[i].srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
+		    (mp_irqs[i].irqtype == type) &&
+		    (mp_irqs[i].srcbusirq == irq))
 
-			return mp_irqs[i].mp_dstirq;
+			return mp_irqs[i].dstirq;
 	}
 	return -1;
 }
@@ -978,17 +978,17 @@ static int __init find_isa_irq_apic(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
+		int lbus = mp_irqs[i].srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
+		    (mp_irqs[i].irqtype == type) &&
+		    (mp_irqs[i].srcbusirq == irq))
 			break;
 	}
 	if (i < mp_irq_entries) {
 		int apic;
 		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].apicid == mp_irqs[i].mp_dstapic)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic)
 				return apic;
 		}
 	}
@@ -1013,23 +1013,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 		return -1;
 	}
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
+		int lbus = mp_irqs[i].srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].apicid == mp_irqs[i].mp_dstapic ||
-			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+			    mp_irqs[i].dstapic == MP_APIC_ALL)
 				break;
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mp_irqtype &&
+		    !mp_irqs[i].irqtype &&
 		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
+		    (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
 
 			if (!(apic || IO_APIC_IRQ(irq)))
 				continue;
 
-			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
+			if (pin == (mp_irqs[i].srcbusirq & 3))
 				return irq;
 			/*
 			 * Use the first all-but-pin matching entry as a
@@ -1072,7 +1072,7 @@ static int EISA_ELCR(unsigned int irq)
  * EISA conforming in the MP table, that means its trigger type must
  * be read in from the ELCR */
 
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
 #define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
 /* PCI interrupts are always polarity one level triggered,
@@ -1089,13 +1089,13 @@ static int EISA_ELCR(unsigned int irq)
 
 static int MPBIOS_polarity(int idx)
 {
-	int bus = mp_irqs[idx].mp_srcbus;
+	int bus = mp_irqs[idx].srcbus;
 	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].mp_irqflag & 3)
+	switch (mp_irqs[idx].irqflag & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent polarity */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -1131,13 +1131,13 @@ static int MPBIOS_polarity(int idx)
 
 static int MPBIOS_trigger(int idx)
 {
-	int bus = mp_irqs[idx].mp_srcbus;
+	int bus = mp_irqs[idx].srcbus;
 	int trigger;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
+	switch ((mp_irqs[idx].irqflag>>2) & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -1215,16 +1215,16 @@ int (*ioapic_renumber_irq)(int ioapic, int irq);
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
-	int bus = mp_irqs[idx].mp_srcbus;
+	int bus = mp_irqs[idx].srcbus;
 
 	/*
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
-	if (mp_irqs[idx].mp_dstirq != pin)
+	if (mp_irqs[idx].dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mp_srcbusirq;
+		irq = mp_irqs[idx].srcbusirq;
 	} else {
 		/*
 		 * PCI IRQs are mapped in order
@@ -2164,8 +2164,8 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 */
 		if (old_id != mp_ioapics[apic].apicid)
 			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].mp_dstapic == old_id)
-					mp_irqs[i].mp_dstapic
+				if (mp_irqs[i].dstapic == old_id)
+					mp_irqs[i].dstapic
 						= mp_ioapics[apic].apicid;
 
 		/*
@@ -3983,8 +3983,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 		return -1;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == mp_INT &&
-		    mp_irqs[i].mp_srcbusirq == bus_irq)
+		if (mp_irqs[i].irqtype == mp_INT &&
+		    mp_irqs[i].srcbusirq == bus_irq)
 			break;
 	if (i >= mp_irq_entries)
 		return -1;
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index a86a6553743..ad36377dc93 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -159,55 +159,55 @@ static void print_MP_intsrc_info(struct mpc_intsrc *m)
 		m->srcbusirq, m->dstapic, m->dstirq);
 }
 
-static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
+static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
 {
 	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
-		mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
-		(mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
-		mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq);
+		mp_irq->irqtype, mp_irq->irqflag & 3,
+		(mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
+		mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
 }
 
 static void __init assign_to_mp_irq(struct mpc_intsrc *m,
-				    struct mp_config_intsrc *mp_irq)
+				    struct mpc_intsrc *mp_irq)
 {
-	mp_irq->mp_dstapic = m->dstapic;
-	mp_irq->mp_type = m->type;
-	mp_irq->mp_irqtype = m->irqtype;
-	mp_irq->mp_irqflag = m->irqflag;
-	mp_irq->mp_srcbus = m->srcbus;
-	mp_irq->mp_srcbusirq = m->srcbusirq;
-	mp_irq->mp_dstirq = m->dstirq;
+	mp_irq->dstapic = m->dstapic;
+	mp_irq->type = m->type;
+	mp_irq->irqtype = m->irqtype;
+	mp_irq->irqflag = m->irqflag;
+	mp_irq->srcbus = m->srcbus;
+	mp_irq->srcbusirq = m->srcbusirq;
+	mp_irq->dstirq = m->dstirq;
 }
 
-static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq,
+static void __init assign_to_mpc_intsrc(struct mpc_intsrc *mp_irq,
 					struct mpc_intsrc *m)
 {
-	m->dstapic = mp_irq->mp_dstapic;
-	m->type = mp_irq->mp_type;
-	m->irqtype = mp_irq->mp_irqtype;
-	m->irqflag = mp_irq->mp_irqflag;
-	m->srcbus = mp_irq->mp_srcbus;
-	m->srcbusirq = mp_irq->mp_srcbusirq;
-	m->dstirq = mp_irq->mp_dstirq;
+	m->dstapic = mp_irq->dstapic;
+	m->type = mp_irq->type;
+	m->irqtype = mp_irq->irqtype;
+	m->irqflag = mp_irq->irqflag;
+	m->srcbus = mp_irq->srcbus;
+	m->srcbusirq = mp_irq->srcbusirq;
+	m->dstirq = mp_irq->dstirq;
 }
 
-static int __init mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq,
+static int __init mp_irq_mpc_intsrc_cmp(struct mpc_intsrc *mp_irq,
 					struct mpc_intsrc *m)
 {
-	if (mp_irq->mp_dstapic != m->dstapic)
+	if (mp_irq->dstapic != m->dstapic)
 		return 1;
-	if (mp_irq->mp_type != m->type)
+	if (mp_irq->type != m->type)
 		return 2;
-	if (mp_irq->mp_irqtype != m->irqtype)
+	if (mp_irq->irqtype != m->irqtype)
 		return 3;
-	if (mp_irq->mp_irqflag != m->irqflag)
+	if (mp_irq->irqflag != m->irqflag)
 		return 4;
-	if (mp_irq->mp_srcbus != m->srcbus)
+	if (mp_irq->srcbus != m->srcbus)
 		return 5;
-	if (mp_irq->mp_srcbusirq != m->srcbusirq)
+	if (mp_irq->srcbusirq != m->srcbusirq)
 		return 6;
-	if (mp_irq->mp_dstirq != m->dstirq)
+	if (mp_irq->dstirq != m->dstirq)
 		return 7;
 
 	return 0;
@@ -808,15 +808,15 @@ static int  __init get_MP_intsrc_index(struct mpc_intsrc *m)
 	/* not legacy */
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		if (mp_irqs[i].mp_irqtype != mp_INT)
+		if (mp_irqs[i].irqtype != mp_INT)
 			continue;
 
-		if (mp_irqs[i].mp_irqflag != 0x0f)
+		if (mp_irqs[i].irqflag != 0x0f)
 			continue;
 
-		if (mp_irqs[i].mp_srcbus != m->srcbus)
+		if (mp_irqs[i].srcbus != m->srcbus)
 			continue;
-		if (mp_irqs[i].mp_srcbusirq != m->srcbusirq)
+		if (mp_irqs[i].srcbusirq != m->srcbusirq)
 			continue;
 		if (irq_used[i]) {
 			/* already claimed */
@@ -921,10 +921,10 @@ static int  __init replace_intsrc_all(struct mpc_table *mpc,
 		if (irq_used[i])
 			continue;
 
-		if (mp_irqs[i].mp_irqtype != mp_INT)
+		if (mp_irqs[i].irqtype != mp_INT)
 			continue;
 
-		if (mp_irqs[i].mp_irqflag != 0x0f)
+		if (mp_irqs[i].irqflag != 0x0f)
 			continue;
 
 		if (nr_m_spare > 0) {
-- 
cgit v1.2.3


From 09b3ec7315a18d885127544204f1e389d41058d0 Mon Sep 17 00:00:00 2001
From: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Date: Mon, 12 Jan 2009 22:35:42 +0100
Subject: x86, tlb flush_data: replace per_cpu with an array

Impact: micro-optimization, memory reduction

On x86_64 flush tlb data is stored in per_cpu variables. This is
unnecessary because only the first NUM_INVALIDATE_TLB_VECTORS entries
are accessed.

This patch aims at making the code less confusing (there's nothing
really "per_cpu") by using a plain array. It also would save some memory
on most distros out there (Ubuntu x86_64 has NR_CPUS=64 by default).

[ Ravikiran G Thirumalai also pointed out that the correct alignment
  is ____cacheline_internodealigned_in_smp, so that there's no
  bouncing on vsmp. ]

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Acked-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_64.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index f8be6f1d2e4..8cfea5d1451 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -33,7 +33,7 @@
  *	To avoid global state use 8 different call vectors.
  *	Each CPU uses a specific vector to trigger flushes on other
  *	CPUs. Depending on the received vector the target CPUs look into
- *	the right per cpu variable for the flush data.
+ *	the right array slot for the flush data.
  *
  *	With more than 8 CPUs they are hashed to the 8 available
  *	vectors. The limited global vector space forces us to this right now.
@@ -48,13 +48,13 @@ union smp_flush_state {
 		unsigned long flush_va;
 		spinlock_t tlbstate_lock;
 	};
-	char pad[SMP_CACHE_BYTES];
-} ____cacheline_aligned;
+	char pad[CONFIG_X86_INTERNODE_CACHE_BYTES];
+} ____cacheline_internodealigned_in_smp;
 
 /* State is put into the per CPU data section, but padded
    to a full cache line because other CPUs can access it and we don't
    want false sharing in the per cpu data segment. */
-static DEFINE_PER_CPU(union smp_flush_state, flush_state);
+static union smp_flush_state flush_state[NUM_INVALIDATE_TLB_VECTORS];
 
 /*
  * We cannot call mmdrop() because we are in interrupt context,
@@ -129,7 +129,7 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 	 * Use that to determine where the sender put the data.
 	 */
 	sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
-	f = &per_cpu(flush_state, sender);
+	f = &flush_state[sender];
 
 	if (!cpu_isset(cpu, f->flush_cpumask))
 		goto out;
@@ -169,7 +169,7 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
 
 	/* Caller has disabled preemption */
 	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
-	f = &per_cpu(flush_state, sender);
+	f = &flush_state[sender];
 
 	/*
 	 * Could avoid this lock when
@@ -205,8 +205,8 @@ static int __cpuinit init_smp_flush(void)
 {
 	int i;
 
-	for_each_possible_cpu(i)
-		spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
+	for (i = 0; i < ARRAY_SIZE(flush_state); i++)
+		spin_lock_init(&flush_state[i].tlbstate_lock);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 0a2a18b721abc960fbcada406746877d22340a60 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 Jan 2009 23:37:16 +0100
Subject: x86: change the default cache size to 64 bytes

Right now the generic cacheline size is 128 bytes - that is wasteful
when structures are aligned, as all modern x86 CPUs have an (effective)
cacheline sizes of 64 bytes.

It was set to 128 bytes due to some cacheline aliasing problems on
older P4 systems, but those are many years old and we dont optimize
for them anymore. (They'll still get the 128 bytes cacheline size if
the kernel is specifically built for Pentium 4)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
---
 arch/x86/Kconfig.cpu | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 8078955845a..cdf4a962323 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -307,10 +307,10 @@ config X86_CMPXCHG
 
 config X86_L1_CACHE_SHIFT
 	int
-	default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
+	default "7" if MPENTIUM4 || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU
 
 config X86_XADD
 	def_bool y
-- 
cgit v1.2.3


From b665967979d0e990f196e7c4ba88e17c9ed9b781 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 12 Jan 2009 11:54:27 -0800
Subject: x86: make 32bit MAX_HARDIRQS_PER_CPU to be NR_VECTORS

Impact: clean up to be same as 64bit

32-bit is using per-cpu vector too, so don't use default NR_IRQS.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/hardirq_32.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
index cf7954d1405..d4b5d731073 100644
--- a/arch/x86/include/asm/hardirq_32.h
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -19,6 +19,9 @@ typedef struct {
 
 DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
 
+/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
+#define MAX_HARDIRQS_PER_CPU NR_VECTORS
+
 #define __ARCH_IRQ_STAT
 #define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
 
-- 
cgit v1.2.3


From 444027031cd069ea7e48b016cb33bbf201c8a9f0 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 14 Jan 2009 23:37:47 +0300
Subject: x86: headers cleanup - prctl.h

Impact: cleanup (internal kernel function exported)

'make headers_check' warn us about leaking of kernel private
(mostly compile time vars) data to userspace in headers. Fix it.

sys_arch_prctl is completely removed from
header since frankly I don't even understand why we
describe it here. It is described like
__SYSCALL(__NR_arch_prctl, sys_arch_prctl) in unistd_64.h
and implemented in process_64.c. User-mode linux involved?
So this one in fact is suspicious.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/prctl.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/prctl.h b/arch/x86/include/asm/prctl.h
index a8894647dd9..3ac5032fae0 100644
--- a/arch/x86/include/asm/prctl.h
+++ b/arch/x86/include/asm/prctl.h
@@ -6,8 +6,4 @@
 #define ARCH_GET_FS 0x1003
 #define ARCH_GET_GS 0x1004
 
-#ifdef CONFIG_X86_64
-extern long sys_arch_prctl(int, unsigned long);
-#endif /* CONFIG_X86_64 */
-
 #endif /* _ASM_X86_PRCTL_H */
-- 
cgit v1.2.3


From a7c4e68615e20771f279c51a2bec8980675c78c7 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 14 Jan 2009 23:37:49 +0300
Subject: x86: headers cleanup - sigcontext32.h

Impact: cleanup

'make headers_check' warn us about lack of linux/types.h
here. Lets add it.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/sigcontext32.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/sigcontext32.h b/arch/x86/include/asm/sigcontext32.h
index 6126188cf3a..ad1478c4ae1 100644
--- a/arch/x86/include/asm/sigcontext32.h
+++ b/arch/x86/include/asm/sigcontext32.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_SIGCONTEXT32_H
 #define _ASM_X86_SIGCONTEXT32_H
 
+#include <linux/types.h>
+
 /* signal context for 32bit programs. */
 
 #define X86_FXSR_MAGIC		0x0000
-- 
cgit v1.2.3


From dbca1df48e89d8aa59254fdc10ef16c16e73d94e Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 14 Jan 2009 23:37:50 +0300
Subject: x86: headers cleanup - setup.h

Impact: cleanup

'make headers_check' warn us about leaking of kernel private
(mostly compile time vars) data to userspace in headers. Fix it.

Guard this one by __KERNEL__.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/setup.h | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index ebe858cdc8a..29d31c0d13d 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_SETUP_H
 #define _ASM_X86_SETUP_H
 
+#ifdef __KERNEL__
+
 #define COMMAND_LINE_SIZE 2048
 
 #ifndef __ASSEMBLY__
@@ -8,10 +10,8 @@
 /* Interrupt control for vSMPowered x86_64 systems */
 void vsmp_init(void);
 
-
 void setup_bios_corruption_check(void);
 
-
 #ifdef CONFIG_X86_VISWS
 extern void visws_early_detect(void);
 extern int is_visws_box(void);
@@ -43,7 +43,7 @@ struct x86_quirks {
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
-                                    unsigned short oemsize);
+				unsigned short oemsize);
 	int (*setup_ioapic_ids)(void);
 	int (*update_genapic)(void);
 };
@@ -56,8 +56,6 @@ extern unsigned long saved_video_mode;
 #endif
 #endif /* __ASSEMBLY__ */
 
-#ifdef __KERNEL__
-
 #ifdef __i386__
 
 #include <linux/pfn.h>
-- 
cgit v1.2.3


From 95c4bff0308eb0819436b730a836846d3e784657 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 14 Jan 2009 23:37:46 +0300
Subject: x86: headers cleanup - boot.h

Impact: cleanup

'make headers_check' warn us about leaking of kernel private
(mostly compile time vars) data to userspace in headers. Fix it.

Neither BOOT_HEAP_SIZE, BOOT_STACK_SIZE refs
was found by searching thru net (ie in user-space area)
so fence this all by __KERNEL__ guard.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/boot.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index c0e8e68a31f..6526cf08b0e 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -10,14 +10,16 @@
 #define EXTENDED_VGA	0xfffe		/* 80x50 mode */
 #define ASK_VGA		0xfffd		/* ask for it at bootup */
 
+#ifdef __KERNEL__
+
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
 				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
-#if (defined CONFIG_KERNEL_BZIP2)
+#ifdef CONFIG_KERNEL_BZIP2
 #define BOOT_HEAP_SIZE             0x400000
-#else
+#else /* !CONFIG_KERNEL_BZIP2 */
 
 #ifdef CONFIG_X86_64
 #define BOOT_HEAP_SIZE	0x7000
@@ -25,7 +27,7 @@
 #define BOOT_HEAP_SIZE	0x4000
 #endif
 
-#endif
+#endif /* !CONFIG_KERNEL_BZIP2 */
 
 #ifdef CONFIG_X86_64
 #define BOOT_STACK_SIZE	0x4000
@@ -33,4 +35,6 @@
 #define BOOT_STACK_SIZE	0x1000
 #endif
 
+#endif /* __KERNEL__ */
+
 #endif /* _ASM_X86_BOOT_H */
-- 
cgit v1.2.3


From d2287f5ebea9ff2487d614719775f0b03fce15f6 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Wed, 14 Jan 2009 15:43:54 -0800
Subject: irq: update all arches for new irq_desc, fix

Impact: fix build errors

Since the SPARSE IRQS changes redefined how the kstat irqs are
organized, arch's must use the new accessor function:

	kstat_incr_irqs_this_cpu(irq, DESC);

If CONFIG_SPARSE_IRQS is set, then DESC is a pointer to the
irq_desc which has a pointer to the kstat_irqs.  If not, then
the .irqs field of struct kernel_stat is used instead.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/kernel/irq_ia64.c            | 12 ++++++++----
 arch/mips/kernel/smtc.c                |  4 +++-
 arch/mips/sgi-ip22/ip22-int.c          |  2 +-
 arch/mips/sgi-ip22/ip22-time.c         |  2 +-
 arch/mips/sibyte/bcm1480/smp.c         |  3 ++-
 arch/mips/sibyte/sb1250/smp.c          |  3 ++-
 arch/mn10300/kernel/mn10300-watchdog.c |  3 ++-
 arch/sparc/kernel/time_64.c            |  2 +-
 8 files changed, 20 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 28d3d483db9..927ad027820 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -493,11 +493,13 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 	saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
 	ia64_srlz_d();
 	while (vector != IA64_SPURIOUS_INT_VECTOR) {
+		struct irq_desc *desc = irq_to_desc(vector);
+
 		if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
 			smp_local_flush_tlb();
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(vector, desc);
 		} else if (unlikely(IS_RESCHEDULE(vector)))
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(vector, desc);
 		else {
 			int irq = local_vector_to_irq(vector);
 
@@ -551,11 +553,13 @@ void ia64_process_pending_intr(void)
 	  * Perform normal interrupt style processing
 	  */
 	while (vector != IA64_SPURIOUS_INT_VECTOR) {
+		struct irq_desc *desc = irq_to_desc(vector);
+
 		if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
 			smp_local_flush_tlb();
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(vector, desc);
 		} else if (unlikely(IS_RESCHEDULE(vector)))
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(vector, desc);
 		else {
 			struct pt_regs *old_regs = set_irq_regs(NULL);
 			int irq = local_vector_to_irq(vector);
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index d2c1ab12425..5f5af7d4c89 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -921,11 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
 	struct clock_event_device *cd;
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
+	int irq = MIPS_CPU_IRQ_BASE + 1;
+
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
-		kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
+		kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 		irq_exit();
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index f8b18af141a..0ecd5fe9486 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -155,7 +155,7 @@ static void indy_buserror_irq(void)
 	int irq = SGI_BUSERR_IRQ;
 
 	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 	ip22_be_interrupt(irq);
 	irq_exit();
 }
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 3dcb27ec0c5..c8f7d2328b2 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -122,7 +122,7 @@ void indy_8254timer_irq(void)
 	char c;
 
 	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 	printk(KERN_ALERT "Oops, got 8254 interrupt.\n");
 	ArcRead(0, &c, 1, &cnt);
 	ArcEnterInteractiveMode();
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index dddfda8e829..314691648c9 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -178,9 +178,10 @@ struct plat_smp_ops bcm1480_smp_ops = {
 void bcm1480_mailbox_interrupt(void)
 {
 	int cpu = smp_processor_id();
+	int irq = K_BCM1480_INT_MBOX_0_0;
 	unsigned int action;
 
-	kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 	/* Load the mailbox register to figure out what we're supposed to do */
 	action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
 
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index 5950a288a7d..cad14003b84 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -166,9 +166,10 @@ struct plat_smp_ops sb_smp_ops = {
 void sb1250_mailbox_interrupt(void)
 {
 	int cpu = smp_processor_id();
+	int irq = K_INT_MBOX_0;
 	unsigned int action;
 
-	kstat_this_cpu.irqs[K_INT_MBOX_0]++;
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 	/* Load the mailbox register to figure out what we're supposed to do */
 	action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
 
diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c
index 10811e981d2..2e370d88a87 100644
--- a/arch/mn10300/kernel/mn10300-watchdog.c
+++ b/arch/mn10300/kernel/mn10300-watchdog.c
@@ -130,6 +130,7 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
 	 * the stack NMI-atomically, it's safe to use smp_processor_id().
 	 */
 	int sum, cpu = smp_processor_id();
+	int irq = NMIIRQ;
 	u8 wdt, tmp;
 
 	wdt = WDCTR & ~WDCTR_WDCNE;
@@ -138,7 +139,7 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
 	NMICR = NMICR_WDIF;
 
 	nmi_count(cpu)++;
-	kstat_this_cpu.irqs[NMIIRQ]++;
+	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 	sum = irq_stat[cpu].__irq_count;
 
 	if (last_irq_sums[cpu] == sum) {
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 54405d36214..28b48f3eb25 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -727,7 +727,7 @@ void timer_interrupt(int irq, struct pt_regs *regs)
 
 	irq_enter();
 
-	kstat_this_cpu.irqs[0]++;
+	kstat_incr_irqs_this_cpu(0, irq_to_desc(0));
 
 	if (unlikely(!evt->event_handler)) {
 		printk(KERN_WARNING
-- 
cgit v1.2.3


From f11826385b63566d98c02d35f592232ee77cd791 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 14 Jan 2009 12:27:35 +0000
Subject: x86: fully honor "nolapic"

Impact: widen the effect of the 'nolapic' boot parameter

"nolapic" should not only suppress SMP and use of the LAPIC, but it
also ought to have the effect of disabling all IO-APIC related activity
as well as PCI MSI and HT-IRQs.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c    | 7 ++++++-
 arch/x86/kernel/io_apic.c | 6 ++++++
 arch/x86/kernel/smpboot.c | 1 +
 3 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 0f830e4f567..c3dd64fabcf 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1126,6 +1126,11 @@ void __cpuinit setup_local_APIC(void)
 	unsigned int value;
 	int i, j;
 
+	if (disable_apic) {
+		disable_ioapic_setup();
+		return;
+	}
+
 #ifdef CONFIG_X86_32
 	/* Pound the ESR really hard over the head with a big hammer - mbligh */
 	if (lapic_is_integrated() && esr_disable) {
@@ -1566,11 +1571,11 @@ int apic_version[MAX_APICS];
 
 int __init APIC_init_uniprocessor(void)
 {
-#ifdef CONFIG_X86_64
 	if (disable_apic) {
 		pr_info("Apic disabled\n");
 		return -1;
 	}
+#ifdef CONFIG_X86_64
 	if (!cpu_has_apic) {
 		disable_apic = 1;
 		pr_info("Apic disabled by BIOS\n");
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 1c4a1302536..40747e58f30 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3258,6 +3258,9 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 	int err;
 	unsigned dest;
 
+	if (disable_apic)
+		return -ENXIO;
+
 	cfg = irq_cfg(irq);
 	err = assign_irq_vector(irq, cfg, TARGET_CPUS);
 	if (err)
@@ -3726,6 +3729,9 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 	struct irq_cfg *cfg;
 	int err;
 
+	if (disable_apic)
+		return -ENXIO;
+
 	cfg = irq_cfg(irq);
 	err = assign_irq_vector(irq, cfg, TARGET_CPUS);
 	if (!err) {
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index bb1a3b1fc87..31f99ec2e0f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1125,6 +1125,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 		printk(KERN_ERR "... forcing use of dummy APIC emulation."
 				"(tell your hw vendor)\n");
 		smpboot_clear_io_apic();
+		disable_ioapic_setup();
 		return -1;
 	}
 
-- 
cgit v1.2.3


From a08c4743ed5b861c4fa3d75be00da7106c926296 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 14 Jan 2009 12:28:51 +0000
Subject: x86: avoid early crash in disable_local_APIC()

E.g. when called due to an early panic.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index c3dd64fabcf..38d6aab2358 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -895,6 +895,10 @@ void disable_local_APIC(void)
 {
 	unsigned int value;
 
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
+
 	clear_local_APIC();
 
 	/*
-- 
cgit v1.2.3


From 54da5b3d44238eeb7417bacf792fb416d473bf4d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 15 Jan 2009 13:04:58 +0100
Subject: x86: fix broken flush_tlb_others_ipi(), fix

Impact: cleanup

Use the proper type.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 54ee2ecb5e2..7f4141d3b66 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -188,7 +188,8 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 	 * We have to send the IPI only to
 	 * CPUs affected.
 	 */
-	send_IPI_mask(f->flush_cpumask, INVALIDATE_TLB_VECTOR_START + sender);
+	send_IPI_mask(to_cpumask(f->flush_cpumask),
+		      INVALIDATE_TLB_VECTOR_START + sender);
 
 	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
 		cpu_relax();
-- 
cgit v1.2.3


From 5cd7376200be7b8bab085557ff5876b04bd84191 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 15 Jan 2009 15:46:08 +0100
Subject: fix: crash: IP: __bitmap_intersects+0x48/0x73

-tip testing found this crash:

> [   35.258515] calling  acpi_cpufreq_init+0x0/0x127 @ 1
> [   35.264127] BUG: unable to handle kernel NULL pointer dereference at (null)
> [   35.267554] IP: [<ffffffff80478092>] __bitmap_intersects+0x48/0x73
> [   35.267554] PGD 0
> [   35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC

arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no
allocation of the variable mask, so we pass in an uninitialized cmd.mask
field to drv_read(), which then passes it to the scheduler which then
crashes ...

Switch it over to the much simpler constant-cpumask-pointers approach.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 6f11e029e8c..019276717a7 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -145,7 +145,7 @@ typedef union {
 
 struct drv_cmd {
 	unsigned int type;
-	cpumask_var_t mask;
+	const struct cpumask *mask;
 	drv_addr_union addr;
 	u32 val;
 };
@@ -235,8 +235,7 @@ static u32 get_cur_val(const struct cpumask *mask)
 		return 0;
 	}
 
-	cpumask_copy(cmd.mask, mask);
-
+	cmd.mask = mask;
 	drv_read(&cmd);
 
 	dprintk("get_cur_val = %u\n", cmd.val);
@@ -403,9 +402,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		return -ENODEV;
 	}
 
-	if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL)))
-		return -ENOMEM;
-
 	perf = data->acpi_data;
 	result = cpufreq_frequency_table_target(policy,
 						data->freq_table,
@@ -450,9 +446,9 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
 	if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
-		cpumask_and(cmd.mask, cpu_online_mask, policy->cpus);
+		cmd.mask = policy->cpus;
 	else
-		cpumask_copy(cmd.mask, cpumask_of(policy->cpu));
+		cmd.mask = cpumask_of(policy->cpu);
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
@@ -479,7 +475,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	perf->state = next_perf_state;
 
 out:
-	free_cpumask_var(cmd.mask);
 	return result;
 }
 
-- 
cgit v1.2.3


From f2a082711905312dc7b6675e913fee0c4689f7ae Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Thu, 15 Jan 2009 09:19:32 -0800
Subject: x86: fix build warning when CONFIG_NUMA not defined.

Impact: fix build warning

The macro cpu_to_node did not reference it's argument, and instead
simply returned a 0.  This causes a "unused variable" warning if
it's the only reference in a function (show_cache_disable).

Replace it with the more correct inline function.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/include/asm/topology.h | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 4e2f2e0aab2..d0c68e29163 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -192,9 +192,20 @@ extern int __node_distance(int, int);
 
 #else /* !CONFIG_NUMA */
 
-#define numa_node_id()		0
-#define	cpu_to_node(cpu)	0
-#define	early_cpu_to_node(cpu)	0
+static inline int numa_node_id(void)
+{
+	return 0;
+}
+
+static inline int cpu_to_node(int cpu)
+{
+	return 0;
+}
+
+static inline int early_cpu_to_node(int cpu)
+{
+	return 0;
+}
 
 static inline const cpumask_t *cpumask_of_node(int node)
 {
-- 
cgit v1.2.3


From c99dbbe9f8f6b3e9383e64710217e873431d1c31 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Thu, 15 Jan 2009 12:09:44 -0800
Subject: sched: fix warning on ia64

Andrew Morton reported this warning on ia64:

  kernel/sched.c: In function `sd_init_NODE':
  kernel/sched.c:7449: warning: comparison of distinct pointer types lacks a cast

Using the untyped min() function produces such warnings.
Fix: type the constant 32 as unsigned int to match typeof(num_online_cpus).

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 32f3af1641c..3193f4417e1 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -84,7 +84,7 @@ void build_cpu_to_node_map(void);
 	.child			= NULL,			\
 	.groups			= NULL,			\
 	.min_interval		= 8,			\
-	.max_interval		= 8*(min(num_online_cpus(), 32)), \
+	.max_interval		= 8*(min(num_online_cpus(), 32U)), \
 	.busy_factor		= 64,			\
 	.imbalance_pct		= 125,			\
 	.cache_nice_tries	= 2,			\
-- 
cgit v1.2.3


From 8d29b7b9f81d6b83d869ff054e6c189d6da73f1f Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Wed, 14 Jan 2009 09:32:19 +1100
Subject: avr32: Fix out-of-range rcalls in large kernels

Replace handcoded rcall instructions with the call pseudo-instruction.
For kernels too far over 1MB the rcall instruction can't reach and
linking will fail.  We already call the final linker with --relax which
converts call pseudo-instructions to the right things anyway.

This fixes

arch/avr32/kernel/built-in.o: In function `syscall_exit_work':
(.ex.text+0x198): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o
arch/avr32/kernel/built-in.o: In function `fault_exit_work':
(.ex.text+0x3b6): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `schedule' defined in .sched.text section in kernel/built-in.o

But I'm still left with

arch/avr32/kernel/built-in.o:(.fixup+0x2): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+45a
arch/avr32/kernel/built-in.o:(.fixup+0x8): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+8ea
arch/avr32/kernel/built-in.o:(.fixup+0xe): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+abe
arch/avr32/kernel/built-in.o:(.fixup+0x14): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ac8
arch/avr32/kernel/built-in.o:(.fixup+0x1a): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ad2
arch/avr32/kernel/built-in.o:(.fixup+0x20): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+adc
arch/avr32/kernel/built-in.o:(.fixup+0x26): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+ae6
arch/avr32/kernel/built-in.o:(.fixup+0x2c): relocation truncated to fit: R_AVR32_22H_PCREL against `.text'+af0
arch/avr32/kernel/built-in.o:(.fixup+0x32): additional relocation overflows omitted from the output

These are caused by a similar problem with 'rjmp' instructions.
Unfortunately, there's no easy fix for these at the moment since we
don't have a arbitrary-range 'jmp' instruction similar to 'call'.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/entry-avr32b.S  | 60 +++++++++++++++++++--------------------
 arch/avr32/kernel/syscall-stubs.S | 14 ++++-----
 arch/avr32/lib/strnlen_user.S     |  2 +-
 3 files changed, 38 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 33d49377b8b..009a80155d6 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -150,10 +150,10 @@ page_not_present:
 	tlbmiss_restore
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_page_fault
+	call	do_page_fault
 	rjmp	ret_from_exception
 
 	.align	2
@@ -250,7 +250,7 @@ syscall_badsys:
 
 	.global ret_from_fork
 ret_from_fork:
-	rcall   schedule_tail
+	call   schedule_tail
 
 	/* check for syscall tracing */
 	get_thread_info r0
@@ -261,7 +261,7 @@ ret_from_fork:
 
 syscall_trace_enter:
 	pushm	r8-r12
-	rcall	syscall_trace
+	call	syscall_trace
 	popm	r8-r12
 	rjmp	syscall_trace_cont
 
@@ -269,14 +269,14 @@ syscall_exit_work:
 	bld	r1, TIF_SYSCALL_TRACE
 	brcc	1f
 	unmask_interrupts
-	rcall	syscall_trace
+	call	syscall_trace
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 
 1:	bld	r1, TIF_NEED_RESCHED
 	brcc	2f
 	unmask_interrupts
-	rcall	schedule
+	call	schedule
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
@@ -287,7 +287,7 @@ syscall_exit_work:
 	unmask_interrupts
 	mov	r12, sp
 	mov	r11, r0
-	rcall	do_notify_resume
+	call	do_notify_resume
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
@@ -394,7 +394,7 @@ handle_critical:
 
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_critical_exception
+	call	do_critical_exception
 
 	/* We should never get here... */
 bad_return:
@@ -407,18 +407,18 @@ bad_return:
 do_bus_error_write:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mov	r11, 1
 	rjmp	1f
 
 do_bus_error_read:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mov	r11, 0
 1:	mfsr	r12, SYSREG_BEAR
 	mov	r10, sp
-	rcall	do_bus_error
+	call	do_bus_error
 	rjmp	ret_from_exception
 
 	.align	1
@@ -433,7 +433,7 @@ do_nmi_ll:
 1:	pushm	r8, r9	/* PC and SR */
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_nmi
+	call	do_nmi
 	popm	r8-r9
 	mtsr	SYSREG_RAR_NMI, r8
 	tst	r0, r0
@@ -457,29 +457,29 @@ do_nmi_ll:
 handle_address_fault:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_address_exception
+	call	do_address_exception
 	rjmp	ret_from_exception
 
 handle_protection_fault:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_page_fault
+	call	do_page_fault
 	rjmp	ret_from_exception
 
 	.align	1
 do_illegal_opcode_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_illegal_opcode
+	call	do_illegal_opcode
 	rjmp	ret_from_exception
 
 do_dtlb_modified:
@@ -513,11 +513,11 @@ do_dtlb_modified:
 do_fpe_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	unmask_interrupts
 	mov	r12, 26
 	mov	r11, sp
-	rcall	do_fpe
+	call	do_fpe
 	rjmp	ret_from_exception
 
 ret_from_exception:
@@ -553,7 +553,7 @@ fault_resume_kernel:
 	lddsp	r4, sp[REG_SR]
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1f
-	rcall	preempt_schedule_irq
+	call	preempt_schedule_irq
 1:
 #endif
 
@@ -582,7 +582,7 @@ fault_exit_work:
 	bld	r1, TIF_NEED_RESCHED
 	brcc	1f
 	unmask_interrupts
-	rcall	schedule
+	call	schedule
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	fault_exit_work
@@ -593,7 +593,7 @@ fault_exit_work:
 	unmask_interrupts
 	mov	r12, sp
 	mov	r11, r0
-	rcall	do_notify_resume
+	call	do_notify_resume
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	fault_exit_work
@@ -616,10 +616,10 @@ handle_debug:
 
 .Ldebug_fixup_cont:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_off
+	call	trace_hardirqs_off
 #endif
 	mov	r12, sp
-	rcall	do_debug
+	call	do_debug
 	mov	sp, r12
 
 	lddsp	r2, sp[REG_SR]
@@ -643,7 +643,7 @@ handle_debug:
 	mtsr	SYSREG_RSR_DBG, r11
 	mtsr	SYSREG_RAR_DBG, r10
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 1:
 #endif
 	ldmts	sp++, r0-lr
@@ -676,7 +676,7 @@ debug_resume_kernel:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bld	r11, SYSREG_GM_OFFSET
 	brcc	1f
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 1:
 #endif
 	mfsr	r2, SYSREG_SR
@@ -747,7 +747,7 @@ irq_level\level:
 	mov	r11, sp
 	mov	r12, \level
 
-	rcall	do_IRQ
+	call	do_IRQ
 
 	lddsp	r4, sp[REG_SR]
 	bfextu	r4, r4, SYSREG_M0_OFFSET, 3
@@ -767,7 +767,7 @@ irq_level\level:
 
 1:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 #endif
 	popm	r8-r9
 	mtsr	rar_int\level, r8
@@ -807,7 +807,7 @@ irq_level\level:
 	lddsp	r4, sp[REG_SR]
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1b
-	rcall	preempt_schedule_irq
+	call	preempt_schedule_irq
 #endif
 	rjmp	1b
 	.endm
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index 673178e235f..f7244cd02fb 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -61,7 +61,7 @@ __sys_execve:
 __sys_mmap2:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_mmap2
+	call	sys_mmap2
 	sub	sp, -4
 	popm	pc
 
@@ -70,7 +70,7 @@ __sys_mmap2:
 __sys_sendto:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_sendto
+	call	sys_sendto
 	sub	sp, -4
 	popm	pc
 
@@ -79,7 +79,7 @@ __sys_sendto:
 __sys_recvfrom:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_recvfrom
+	call	sys_recvfrom
 	sub	sp, -4
 	popm	pc
 
@@ -88,7 +88,7 @@ __sys_recvfrom:
 __sys_pselect6:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_pselect6
+	call	sys_pselect6
 	sub	sp, -4
 	popm	pc
 
@@ -97,7 +97,7 @@ __sys_pselect6:
 __sys_splice:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_splice
+	call	sys_splice
 	sub	sp, -4
 	popm	pc
 
@@ -106,7 +106,7 @@ __sys_splice:
 __sys_epoll_pwait:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_epoll_pwait
+	call	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
 
@@ -115,6 +115,6 @@ __sys_epoll_pwait:
 __sys_sync_file_range:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_sync_file_range
+	call	sys_sync_file_range
 	sub	sp, -4
 	popm	pc
diff --git a/arch/avr32/lib/strnlen_user.S b/arch/avr32/lib/strnlen_user.S
index 65ce11afa66..e46f4724962 100644
--- a/arch/avr32/lib/strnlen_user.S
+++ b/arch/avr32/lib/strnlen_user.S
@@ -48,7 +48,7 @@ adjust_length:
 	lddpc	lr, _task_size
 	sub	r11, lr, r12
 	mov	r9, r11
-	rcall	__strnlen_user
+	call	__strnlen_user
 	cp.w	r12, r9
 	brgt	1f
 	popm	pc
-- 
cgit v1.2.3


From 61f3632fdcdcf547f6487f56b45976d7964756c4 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Wed, 14 Jan 2009 13:32:53 +0100
Subject: avr32: fix out-of-range rjmp instruction on large kernels

Use .subsection to place fixups closer to their jump targets. This
increases the maximum size of the kernel before we get link errors
significantly.

The problem here is that we don't have a "call"-ish pseudo-instruction
to use instead of rjmp...we could add one, but that means we'll have to
wait for a new toolchain release, wait until we're fairly sure most
people are using it, etc...

As an added bonus, it should decrease the RAM footprint slightly,
though it might pollute the icache a bit more.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/include/asm/uaccess.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h
index ed092395215..245b2ee213c 100644
--- a/arch/avr32/include/asm/uaccess.h
+++ b/arch/avr32/include/asm/uaccess.h
@@ -230,10 +230,10 @@ extern int __put_user_bad(void);
 	asm volatile(							\
 		"1:	ld." suffix "	%1, %3			\n"	\
 		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
+		"	.subsection 1				\n"	\
 		"3:	mov	%0, %4				\n"	\
 		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
+		"	.subsection 0				\n"	\
 		"	.section __ex_table, \"a\"		\n"	\
 		"	.long	1b, 3b				\n"	\
 		"	.previous				\n"	\
@@ -295,10 +295,10 @@ extern int __put_user_bad(void);
 	asm volatile(							\
 		"1:	st." suffix "	%1, %3			\n"	\
 		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
+		"	.subsection 1				\n"	\
 		"3:	mov	%0, %4				\n"	\
 		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
+		"	.subsection 0				\n"	\
 		"	.section __ex_table, \"a\"		\n"	\
 		"	.long	1b, 3b				\n"	\
 		"	.previous				\n"	\
-- 
cgit v1.2.3


From 7de6883faad71e3a253d55b9e1a47b89ebce0a31 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:34 +0900
Subject: x86: fix pda_to_op()

There's no instruction to move a 64bit immediate into memory location.
Drop "i".

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pda.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 2fbfff88df3..cbd3f48a832 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -78,7 +78,7 @@ do {									\
 	case 8:								\
 		asm(op "q %1,%%gs:%c2":					\
 		    "+m" (_proxy_pda.field) :				\
-		    "ri" ((T__)val),					\
+		    "r" ((T__)val),					\
 		    "i"(pda_offset(field)));				\
 		break;							\
 	default:							\
-- 
cgit v1.2.3


From f10fcd47120e80f66665567dbe17f5071c7aef52 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:34 +0900
Subject: x86: make early_per_cpu() a lvalue and use it

Make early_per_cpu() a lvalue as per_cpu() is and use it where
applicable.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h   |  6 +++---
 arch/x86/include/asm/topology.h |  5 +----
 arch/x86/kernel/apic.c          | 13 ++-----------
 3 files changed, 6 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index ece72053ba6..df644f3e53e 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -195,9 +195,9 @@ do {							\
 #define	early_per_cpu_ptr(_name) (_name##_early_ptr)
 #define	early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
 #define	early_per_cpu(_name, _cpu) 				\
-	(early_per_cpu_ptr(_name) ?				\
-		early_per_cpu_ptr(_name)[_cpu] :		\
-		per_cpu(_name, _cpu))
+	*(early_per_cpu_ptr(_name) ?				\
+		&early_per_cpu_ptr(_name)[_cpu] :		\
+		&per_cpu(_name, _cpu))
 
 #else	/* !CONFIG_SMP */
 #define	DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)		\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 4e2f2e0aab2..87ca3fd86e8 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -102,10 +102,7 @@ static inline int cpu_to_node(int cpu)
 /* Same function but used if called before per_cpu areas are setup */
 static inline int early_cpu_to_node(int cpu)
 {
-	if (early_per_cpu_ptr(x86_cpu_to_node_map))
-		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
-
-	return per_cpu(x86_cpu_to_node_map, cpu);
+	return early_per_cpu(x86_cpu_to_node_map, cpu);
 }
 
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 38d6aab2358..48578795583 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1877,17 +1877,8 @@ void __cpuinit generic_processor_info(int apicid, int version)
 #endif
 
 #if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
-	/* are we being called early in kernel startup? */
-	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
-		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
-		u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-
-		cpu_to_apicid[cpu] = apicid;
-		bios_cpu_apicid[cpu] = apicid;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
-	}
+	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
 #endif
 
 	set_cpu_possible(cpu, true);
-- 
cgit v1.2.3


From c90aa894f0240084f2c6e42e2333b211d6cfe2b2 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Tue, 13 Jan 2009 20:41:34 +0900
Subject: x86: cleanup early setup_percpu references

[ Based on original patch from Christoph Lameter and Mike Travis. ]

  * Ruggedize some calls in setup_percpu.c to prevent mishaps
    in early calls, particularly for non-critical functions.

  * Cleanup DEBUG_PER_CPU_MAPS usages and some comments.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 56 ++++++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index bf63de72b64..56c63ac62b1 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -15,6 +15,12 @@
 #include <asm/highmem.h>
 #include <asm/cpumask.h>
 
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+# define DBG(x...) printk(KERN_DEBUG x)
+#else
+# define DBG(x...)
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 unsigned int num_processors;
 unsigned disabled_cpus __cpuinitdata;
@@ -27,31 +33,39 @@ unsigned int max_physical_apicid;
 physid_mask_t phys_cpu_present_map;
 #endif
 
-/* map cpu index to physical APIC ID */
+/*
+ * Map cpu index to physical APIC ID
+ */
 DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
 DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
 
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-#define	X86_64_NUMA	1
+#define	X86_64_NUMA	1	/* (used later) */
 
-/* map cpu index to node index */
+/*
+ * Map cpu index to node index
+ */
 DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
 
-/* which logical CPUs are on which nodes */
+/*
+ * Which logical CPUs are on which nodes
+ */
 cpumask_t *node_to_cpumask_map;
 EXPORT_SYMBOL(node_to_cpumask_map);
 
-/* setup node_to_cpumask_map */
+/*
+ * Setup node_to_cpumask_map
+ */
 static void __init setup_node_to_cpumask_map(void);
 
 #else
 static inline void setup_node_to_cpumask_map(void) { }
 #endif
 
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 /*
  * Copy data used in early init routines from the initial arrays to the
  * per cpu data areas.  These arrays then become expendable and the
@@ -200,6 +214,8 @@ void __init setup_per_cpu_areas(void)
 #endif
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
 
 	/* Setup percpu data maps */
@@ -221,6 +237,7 @@ void __init setup_per_cpu_areas(void)
  * Requires node_possible_map to be valid.
  *
  * Note: node_to_cpumask() is not valid until after this is done.
+ * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.)
  */
 static void __init setup_node_to_cpumask_map(void)
 {
@@ -236,6 +253,7 @@ static void __init setup_node_to_cpumask_map(void)
 
 	/* allocate the map */
 	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
+	DBG("node_to_cpumask_map at %p for %d nodes\n", map, nr_node_ids);
 
 	pr_debug("Node to cpumask map at %p for %d nodes\n",
 		 map, nr_node_ids);
@@ -248,17 +266,23 @@ void __cpuinit numa_set_node(int cpu, int node)
 {
 	int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
 
-	if (cpu_pda(cpu) && node != NUMA_NO_NODE)
-		cpu_pda(cpu)->nodenumber = node;
-
-	if (cpu_to_node_map)
+	/* early setting, no percpu area yet */
+	if (cpu_to_node_map) {
 		cpu_to_node_map[cpu] = node;
+		return;
+	}
 
-	else if (per_cpu_offset(cpu))
-		per_cpu(x86_cpu_to_node_map, cpu) = node;
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+	if (cpu >= nr_cpu_ids || !per_cpu_offset(cpu)) {
+		printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
+		dump_stack();
+		return;
+	}
+#endif
+	per_cpu(x86_cpu_to_node_map, cpu) = node;
 
-	else
-		pr_debug("Setting node for non-present cpu %d\n", cpu);
+	if (node != NUMA_NO_NODE)
+		cpu_pda(cpu)->nodenumber = node;
 }
 
 void __cpuinit numa_clear_node(int cpu)
@@ -275,7 +299,7 @@ void __cpuinit numa_add_cpu(int cpu)
 
 void __cpuinit numa_remove_cpu(int cpu)
 {
-	cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]);
+	cpu_clear(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
 }
 
 #else /* CONFIG_DEBUG_PER_CPU_MAPS */
@@ -285,7 +309,7 @@ void __cpuinit numa_remove_cpu(int cpu)
  */
 static void __cpuinit numa_set_cpumask(int cpu, int enable)
 {
-	int node = cpu_to_node(cpu);
+	int node = early_cpu_to_node(cpu);
 	cpumask_t *mask;
 	char buf[64];
 
-- 
cgit v1.2.3


From a698c823e15149941b0f0281527d0c0d1daf2639 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: make vmlinux_32.lds.S use PERCPU() macro

Make vmlinux_32.lds.S use the generic PERCPU() macro instead of open
coding it.  This will ease future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmlinux_32.lds.S | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index 82c67559dde..3eba7f7bac0 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -178,14 +178,7 @@ SECTIONS
 	__initramfs_end = .;
   }
 #endif
-  . = ALIGN(PAGE_SIZE);
-  .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
-	__per_cpu_start = .;
-	*(.data.percpu.page_aligned)
-	*(.data.percpu)
-	*(.data.percpu.shared_aligned)
-	__per_cpu_end = .;
-  }
+  PERCPU(PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
   /* freed after init ends here */
 
-- 
cgit v1.2.3


From 3e5d8f978435bb9ba4dfe3f4514e65e7885db1a9 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: make percpu symbols zerobased on SMP

[ Based on original patch from Christoph Lameter and Mike Travis. ]

This patch makes percpu symbols zerobased on x86_64 SMP by adding
PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on
the percpu output section and using it in vmlinux_64.lds.S.  A new
PHDR is added as existing ones cannot contain sections near address
zero.  PERCPU_VADDR() also adds a new symbol __per_cpu_load which
always points to the vaddr of the loaded percpu data.init region.

The following adjustments have been made to accomodate the address
change.

* code to locate percpu gdt_page in head_64.S is updated to add the
  load address to the gdt_page offset.

* __per_cpu_load is used in places where access to the init data area
  is necessary.

* pda->data_offset is initialized soon after C code is entered as zero
  value doesn't work anymore.

This patch is mostly taken from Mike Travis' "x86_64: Base percpu
variables at zero" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/head64.c         |  2 ++
 arch/x86/kernel/head_64.S        | 24 +++++++++++++++++++++++-
 arch/x86/kernel/setup_percpu.c   |  2 +-
 arch/x86/kernel/vmlinux_64.lds.S | 17 ++++++++++++++++-
 4 files changed, 42 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index b9a4d8c4b93..bc2900ca82c 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -44,6 +44,8 @@ void __init x86_64_init_pda(void)
 {
 	_cpu_pda = __cpu_pda;
 	cpu_pda(0) = &_boot_cpu_pda;
+	cpu_pda(0)->data_offset =
+		(unsigned long)(__per_cpu_load - __per_cpu_start);
 	pda_init(0);
 }
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 0e275d49556..7ee0363871e 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -204,6 +204,23 @@ ENTRY(secondary_startup_64)
 	pushq $0
 	popfq
 
+#ifdef CONFIG_SMP
+	/*
+	 * early_gdt_base should point to the gdt_page in static percpu init
+	 * data area.  Computing this requires two symbols - __per_cpu_load
+	 * and per_cpu__gdt_page.  As linker can't do no such relocation, do
+	 * it by hand.  As early_gdt_descr is manipulated by C code for
+	 * secondary CPUs, this should be done only once for the boot CPU
+	 * when early_gdt_descr_base contains zero.
+	 */
+	movq	early_gdt_descr_base(%rip), %rax
+	testq	%rax, %rax
+	jnz	1f
+	movq	$__per_cpu_load, %rax
+	addq	$per_cpu__gdt_page, %rax
+	movq	%rax, early_gdt_descr_base(%rip)
+1:
+#endif
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
@@ -401,7 +418,12 @@ NEXT_PAGE(level2_spare_pgt)
 	.globl early_gdt_descr
 early_gdt_descr:
 	.word	GDT_ENTRIES*8-1
-	.quad   per_cpu__gdt_page
+#ifdef CONFIG_SMP
+early_gdt_descr_base:
+	.quad   0x0000000000000000
+#else
+	.quad	per_cpu__gdt_page
+#endif
 
 ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 56c63ac62b1..44845842e72 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -213,7 +213,7 @@ void __init setup_per_cpu_areas(void)
 		}
 #endif
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 1a614c0e6be..f50280db0df 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -19,6 +19,9 @@ PHDRS {
 	data PT_LOAD FLAGS(7);	/* RWE */
 	user PT_LOAD FLAGS(7);	/* RWE */
 	data.init PT_LOAD FLAGS(7);	/* RWE */
+#ifdef CONFIG_SMP
+	percpu PT_LOAD FLAGS(7);	/* RWE */
+#endif
 	note PT_NOTE FLAGS(0);	/* ___ */
 }
 SECTIONS
@@ -208,14 +211,26 @@ SECTIONS
   __initramfs_end = .;
 #endif
 
+#ifdef CONFIG_SMP
+  /*
+   * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
+   * output PHDR, so the next output section - __data_nosave - should
+   * switch it back to data.init.
+   */
+  . = ALIGN(PAGE_SIZE);
+  PERCPU_VADDR(0, :percpu)
+#else
   PERCPU(PAGE_SIZE)
+#endif
 
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
   . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
+  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+      *(.data.nosave)
+  } :data.init	/* switch back to data.init, see PERCPU_VADDR() above */
   . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
-- 
cgit v1.2.3


From f32ff5388d86518c0375ccdb330d3b459b9c405e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: load pointer to pda into %gs while brining up a CPU

[ Based on original patch from Christoph Lameter and Mike Travis. ]

CPU startup code in head_64.S loaded address of a zero page into %gs
for temporary use till pda is loaded but address to the actual pda is
available at the point.  Load the real address directly instead.

This will help unifying percpu and pda handling later on.

This patch is mostly taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/trampoline.h |  1 +
 arch/x86/kernel/acpi/sleep.c      |  1 +
 arch/x86/kernel/head64.c          |  4 ++--
 arch/x86/kernel/head_64.S         | 15 ++++++++++-----
 arch/x86/kernel/smpboot.c         |  1 +
 5 files changed, 15 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h
index 780ba0ab94f..90f06c25221 100644
--- a/arch/x86/include/asm/trampoline.h
+++ b/arch/x86/include/asm/trampoline.h
@@ -13,6 +13,7 @@ extern unsigned char *trampoline_base;
 
 extern unsigned long init_rsp;
 extern unsigned long initial_code;
+extern unsigned long initial_gs;
 
 #define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE)
 #define TRAMPOLINE_BASE 0x6000
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 707c1f6f95f..9ff67f8dc2c 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -101,6 +101,7 @@ int acpi_save_state_mem(void)
 	stack_start.sp = temp_stack + sizeof(temp_stack);
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_table(smp_processor_id());
+	initial_gs = (unsigned long)cpu_pda(smp_processor_id());
 #endif
 	initial_code = (unsigned long)wakeup_long64;
 	saved_magic = 0x123456789abcdef0;
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index bc2900ca82c..76ffba2aa66 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -26,8 +26,8 @@
 #include <asm/bios_ebda.h>
 #include <asm/trampoline.h>
 
-/* boot cpu pda */
-static struct x8664_pda _boot_cpu_pda;
+/* boot cpu pda, referenced by head_64.S to initialize %gs for boot CPU */
+struct x8664_pda _boot_cpu_pda;
 
 #ifdef CONFIG_SMP
 /*
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 7ee0363871e..2f0ab008988 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -243,12 +243,15 @@ ENTRY(secondary_startup_64)
 	movl %eax,%fs
 	movl %eax,%gs
 
-	/* 
-	 * Setup up a dummy PDA. this is just for some early bootup code
-	 * that does in_interrupt() 
-	 */ 
+	/* Set up %gs.
+	 *
+	 * %gs should point to the pda.  For initial boot, make %gs point
+	 * to the _boot_cpu_pda in data section.  For a secondary CPU,
+	 * initial_gs should be set to its pda address before the CPU runs
+	 * this code.
+	 */
 	movl	$MSR_GS_BASE,%ecx
-	movq	$empty_zero_page,%rax
+	movq	initial_gs(%rip),%rax
 	movq    %rax,%rdx
 	shrq	$32,%rdx
 	wrmsr	
@@ -274,6 +277,8 @@ ENTRY(secondary_startup_64)
 	.align	8
 	ENTRY(initial_code)
 	.quad	x86_64_start_kernel
+	ENTRY(initial_gs)
+	.quad	_boot_cpu_pda
 	__FINITDATA
 
 	ENTRY(stack_start)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 1a712da1dfa..70d846628bb 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -854,6 +854,7 @@ do_rest:
 #else
 	cpu_pda(cpu)->pcurrent = c_idle.idle;
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
+	initial_gs = (unsigned long)cpu_pda(cpu);
 #endif
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	initial_code = (unsigned long)start_secondary;
-- 
cgit v1.2.3


From c8f3329a0ddd751241e96b4100df7eda14b2cbc6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: use static _cpu_pda array

_cpu_pda array first uses statically allocated storage in data.init
and then switches to allocated bootmem to conserve space.  However,
after folding pda area into percpu area, _cpu_pda array will be
removed completely.  Drop the reallocation part to simplify the code
for soon-to-follow changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pda.h     |  3 ++-
 arch/x86/kernel/cpu/common.c   |  2 +-
 arch/x86/kernel/head64.c       | 12 ------------
 arch/x86/kernel/setup_percpu.c | 14 +++-----------
 4 files changed, 6 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index cbd3f48a832..2d5b49c3248 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -5,6 +5,7 @@
 #include <linux/stddef.h>
 #include <linux/types.h>
 #include <linux/cache.h>
+#include <linux/threads.h>
 #include <asm/page.h>
 
 /* Per processor datastructure. %gs points to it while the kernel runs */
@@ -39,7 +40,7 @@ struct x8664_pda {
 	unsigned irq_spurious_count;
 } ____cacheline_aligned_in_smp;
 
-extern struct x8664_pda **_cpu_pda;
+extern struct x8664_pda *_cpu_pda[NR_CPUS];
 extern void pda_init(int);
 
 #define cpu_pda(i) (_cpu_pda[i])
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f0025846244..c116c599326 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -879,7 +879,7 @@ static __init int setup_disablecpuid(char *arg)
 __setup("clearcpuid=", setup_disablecpuid);
 
 #ifdef CONFIG_X86_64
-struct x8664_pda **_cpu_pda __read_mostly;
+struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(_cpu_pda);
 
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 76ffba2aa66..462d0beccb6 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -29,20 +29,8 @@
 /* boot cpu pda, referenced by head_64.S to initialize %gs for boot CPU */
 struct x8664_pda _boot_cpu_pda;
 
-#ifdef CONFIG_SMP
-/*
- * We install an empty cpu_pda pointer table to indicate to early users
- * (numa_set_node) that the cpu_pda pointer table for cpus other than
- * the boot cpu is not yet setup.
- */
-static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
-#else
-static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
-#endif
-
 void __init x86_64_init_pda(void)
 {
-	_cpu_pda = __cpu_pda;
 	cpu_pda(0) = &_boot_cpu_pda;
 	cpu_pda(0)->data_offset =
 		(unsigned long)(__per_cpu_load - __per_cpu_start);
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 44845842e72..73ab01b297c 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -114,7 +114,6 @@ static inline void setup_cpu_pda_map(void) { }
 static void __init setup_cpu_pda_map(void)
 {
 	char *pda;
-	struct x8664_pda **new_cpu_pda;
 	unsigned long size;
 	int cpu;
 
@@ -122,28 +121,21 @@ static void __init setup_cpu_pda_map(void)
 
 	/* allocate cpu_pda array and pointer table */
 	{
-		unsigned long tsize = nr_cpu_ids * sizeof(void *);
 		unsigned long asize = size * (nr_cpu_ids - 1);
 
-		tsize = roundup(tsize, cache_line_size());
-		new_cpu_pda = alloc_bootmem(tsize + asize);
-		pda = (char *)new_cpu_pda + tsize;
+		pda = alloc_bootmem(asize);
 	}
 
 	/* initialize pointer table to static pda's */
 	for_each_possible_cpu(cpu) {
 		if (cpu == 0) {
 			/* leave boot cpu pda in place */
-			new_cpu_pda[0] = cpu_pda(0);
 			continue;
 		}
-		new_cpu_pda[cpu] = (struct x8664_pda *)pda;
-		new_cpu_pda[cpu]->in_bootmem = 1;
+		cpu_pda(cpu) = (struct x8664_pda *)pda;
+		cpu_pda(cpu)->in_bootmem = 1;
 		pda += size;
 	}
-
-	/* point to new pointer table */
-	_cpu_pda = new_cpu_pda;
 }
 
 #endif /* CONFIG_SMP && CONFIG_X86_64 */
-- 
cgit v1.2.3


From 1a51e3a0aed18767cf2762e95456ecfeb0bca5e6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: fold pda into percpu area on SMP

[ Based on original patch from Christoph Lameter and Mike Travis. ]

Currently pdas and percpu areas are allocated separately.  %gs points
to local pda and percpu area can be reached using pda->data_offset.
This patch folds pda into percpu area.

Due to strange gcc requirement, pda needs to be at the beginning of
the percpu area so that pda->stack_canary is at %gs:40.  To achieve
this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is
added and used to reserve pda sized chunk at the start of the percpu
area.

After this change, for boot cpu, %gs first points to pda in the
data.init area and later during setup_per_cpu_areas() gets updated to
point to the actual pda.  This means that setup_per_cpu_areas() need
to reload %gs for CPU0 while clearing pda area for other cpus as cpu0
already has modified it when control reaches setup_per_cpu_areas().

This patch also removes now unnecessary get_local_pda() and its call
sites.

A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into
per cpu area" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h    |   8 +++
 arch/x86/include/asm/smp.h       |   2 -
 arch/x86/kernel/asm-offsets_64.c |   1 +
 arch/x86/kernel/cpu/common.c     |   6 +--
 arch/x86/kernel/head64.c         |   8 ++-
 arch/x86/kernel/head_64.S        |  15 ++++--
 arch/x86/kernel/setup_percpu.c   | 107 +++++++++++++++++----------------------
 arch/x86/kernel/smpboot.c        |  60 +---------------------
 arch/x86/kernel/vmlinux_64.lds.S |   6 ++-
 arch/x86/xen/smp.c               |  10 ----
 10 files changed, 80 insertions(+), 143 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index df644f3e53e..0ed77cf33f7 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -1,6 +1,14 @@
 #ifndef _ASM_X86_PERCPU_H
 #define _ASM_X86_PERCPU_H
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_X86_64
+extern void load_pda_offset(int cpu);
+#else
+static inline void load_pda_offset(int cpu) { }
+#endif
+#endif
+
 #ifdef CONFIG_X86_64
 #include <linux/compiler.h>
 
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index a8cea7b0943..127415402ea 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -19,8 +19,6 @@
 #include <asm/thread_info.h>
 #include <asm/cpumask.h>
 
-extern int __cpuinit get_local_pda(int cpu);
-
 extern int smp_num_siblings;
 extern unsigned int num_processors;
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 1d41d3f1edb..f8d1b047ef4 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -56,6 +56,7 @@ int main(void)
 	ENTRY(cpunumber);
 	ENTRY(irqstackptr);
 	ENTRY(data_offset);
+	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
 #undef ENTRY
 #ifdef CONFIG_PARAVIRT
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c116c599326..7041acdf557 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -893,10 +893,8 @@ void __cpuinit pda_init(int cpu)
 	/* Setup up data that may be needed in __get_free_pages early */
 	loadsegment(fs, 0);
 	loadsegment(gs, 0);
-	/* Memory clobbers used to order PDA accessed */
-	mb();
-	wrmsrl(MSR_GS_BASE, pda);
-	mb();
+
+	load_pda_offset(cpu);
 
 	pda->cpunumber = cpu;
 	pda->irqcount = -1;
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 462d0beccb6..1a311293f73 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -26,12 +26,18 @@
 #include <asm/bios_ebda.h>
 #include <asm/trampoline.h>
 
-/* boot cpu pda, referenced by head_64.S to initialize %gs for boot CPU */
+#ifndef CONFIG_SMP
+/* boot cpu pda, referenced by head_64.S to initialize %gs on UP */
 struct x8664_pda _boot_cpu_pda;
+#endif
 
 void __init x86_64_init_pda(void)
 {
+#ifdef CONFIG_SMP
+	cpu_pda(0) = (void *)__per_cpu_load;
+#else
 	cpu_pda(0) = &_boot_cpu_pda;
+#endif
 	cpu_pda(0)->data_offset =
 		(unsigned long)(__per_cpu_load - __per_cpu_start);
 	pda_init(0);
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2f0ab008988..7a995d0e9f7 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -245,10 +245,13 @@ ENTRY(secondary_startup_64)
 
 	/* Set up %gs.
 	 *
-	 * %gs should point to the pda.  For initial boot, make %gs point
-	 * to the _boot_cpu_pda in data section.  For a secondary CPU,
-	 * initial_gs should be set to its pda address before the CPU runs
-	 * this code.
+	 * On SMP, %gs should point to the per-cpu area.  For initial
+	 * boot, make %gs point to the init data section.  For a
+	 * secondary CPU,initial_gs should be set to its pda address
+	 * before the CPU runs this code.
+	 *
+	 * On UP, initial_gs points to _boot_cpu_pda and doesn't
+	 * change.
 	 */
 	movl	$MSR_GS_BASE,%ecx
 	movq	initial_gs(%rip),%rax
@@ -278,7 +281,11 @@ ENTRY(secondary_startup_64)
 	ENTRY(initial_code)
 	.quad	x86_64_start_kernel
 	ENTRY(initial_gs)
+#ifdef CONFIG_SMP
+	.quad	__per_cpu_load
+#else
 	.quad	_boot_cpu_pda
+#endif
 	__FINITDATA
 
 	ENTRY(stack_start)
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 73ab01b297c..63d46280227 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -13,6 +13,7 @@
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
 #include <asm/highmem.h>
+#include <asm/proto.h>
 #include <asm/cpumask.h>
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
@@ -65,6 +66,36 @@ static void __init setup_node_to_cpumask_map(void);
 static inline void setup_node_to_cpumask_map(void) { }
 #endif
 
+#ifdef CONFIG_X86_64
+void __cpuinit load_pda_offset(int cpu)
+{
+	/* Memory clobbers used to order pda/percpu accesses */
+	mb();
+	wrmsrl(MSR_GS_BASE, cpu_pda(cpu));
+	mb();
+}
+
+#endif /* CONFIG_SMP && CONFIG_X86_64 */
+
+#ifdef CONFIG_X86_64
+
+/* correctly size the local cpu masks */
+static void setup_cpu_local_masks(void)
+{
+	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
+	alloc_bootmem_cpumask_var(&cpu_callin_mask);
+	alloc_bootmem_cpumask_var(&cpu_callout_mask);
+	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
+}
+
+#else /* CONFIG_X86_32 */
+
+static inline void setup_cpu_local_masks(void)
+{
+}
+
+#endif /* CONFIG_X86_32 */
+
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 /*
  * Copy data used in early init routines from the initial arrays to the
@@ -101,63 +132,7 @@ static void __init setup_per_cpu_maps(void)
  */
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(__per_cpu_offset);
-static inline void setup_cpu_pda_map(void) { }
-
-#elif !defined(CONFIG_SMP)
-static inline void setup_cpu_pda_map(void) { }
-
-#else /* CONFIG_SMP && CONFIG_X86_64 */
-
-/*
- * Allocate cpu_pda pointer table and array via alloc_bootmem.
- */
-static void __init setup_cpu_pda_map(void)
-{
-	char *pda;
-	unsigned long size;
-	int cpu;
-
-	size = roundup(sizeof(struct x8664_pda), cache_line_size());
-
-	/* allocate cpu_pda array and pointer table */
-	{
-		unsigned long asize = size * (nr_cpu_ids - 1);
-
-		pda = alloc_bootmem(asize);
-	}
-
-	/* initialize pointer table to static pda's */
-	for_each_possible_cpu(cpu) {
-		if (cpu == 0) {
-			/* leave boot cpu pda in place */
-			continue;
-		}
-		cpu_pda(cpu) = (struct x8664_pda *)pda;
-		cpu_pda(cpu)->in_bootmem = 1;
-		pda += size;
-	}
-}
-
-#endif /* CONFIG_SMP && CONFIG_X86_64 */
-
-#ifdef CONFIG_X86_64
-
-/* correctly size the local cpu masks */
-static void setup_cpu_local_masks(void)
-{
-	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
-	alloc_bootmem_cpumask_var(&cpu_callin_mask);
-	alloc_bootmem_cpumask_var(&cpu_callout_mask);
-	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
-}
-
-#else /* CONFIG_X86_32 */
-
-static inline void setup_cpu_local_masks(void)
-{
-}
-
-#endif /* CONFIG_X86_32 */
+#endif
 
 /*
  * Great future plan:
@@ -171,9 +146,6 @@ void __init setup_per_cpu_areas(void)
 	int cpu;
 	unsigned long align = 1;
 
-	/* Setup cpu_pda map */
-	setup_cpu_pda_map();
-
 	/* Copy section for each CPU (we discard the original) */
 	old_size = PERCPU_ENOUGH_ROOM;
 	align = max_t(unsigned long, PAGE_SIZE, align);
@@ -204,8 +176,21 @@ void __init setup_per_cpu_areas(void)
 				cpu, node, __pa(ptr));
 		}
 #endif
-		per_cpu_offset(cpu) = ptr - __per_cpu_start;
+
 		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
+#ifdef CONFIG_X86_64
+		cpu_pda(cpu) = (void *)ptr;
+
+		/*
+		 * CPU0 modified pda in the init data area, reload pda
+		 * offset for CPU0 and clear the area for others.
+		 */
+		if (cpu == 0)
+			load_pda_offset(0);
+		else
+			memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu)));
+#endif
+		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 70d846628bb..f2f77ca494d 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -744,52 +744,6 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 	complete(&c_idle->done);
 }
 
-#ifdef CONFIG_X86_64
-
-/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
-static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
-{
-	if (!after_bootmem)
-		free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
-}
-
-/*
- * Allocate node local memory for the AP pda.
- *
- * Must be called after the _cpu_pda pointer table is initialized.
- */
-int __cpuinit get_local_pda(int cpu)
-{
-	struct x8664_pda *oldpda, *newpda;
-	unsigned long size = sizeof(struct x8664_pda);
-	int node = cpu_to_node(cpu);
-
-	if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem)
-		return 0;
-
-	oldpda = cpu_pda(cpu);
-	newpda = kmalloc_node(size, GFP_ATOMIC, node);
-	if (!newpda) {
-		printk(KERN_ERR "Could not allocate node local PDA "
-			"for CPU %d on node %d\n", cpu, node);
-
-		if (oldpda)
-			return 0;	/* have a usable pda */
-		else
-			return -1;
-	}
-
-	if (oldpda) {
-		memcpy(newpda, oldpda, size);
-		free_bootmem_pda(oldpda);
-	}
-
-	newpda->in_bootmem = 0;
-	cpu_pda(cpu) = newpda;
-	return 0;
-}
-#endif /* CONFIG_X86_64 */
-
 static int __cpuinit do_boot_cpu(int apicid, int cpu)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
@@ -807,16 +761,6 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 	};
 	INIT_WORK(&c_idle.work, do_fork_idle);
 
-#ifdef CONFIG_X86_64
-	/* Allocate node local memory for AP pdas */
-	if (cpu > 0) {
-		boot_error = get_local_pda(cpu);
-		if (boot_error)
-			goto restore_state;
-			/* if can't get pda memory, can't start cpu */
-	}
-#endif
-
 	alternatives_smp_switch(1);
 
 	c_idle.idle = get_idle_for_cpu(cpu);
@@ -931,9 +875,7 @@ do_rest:
 				inquire_remote_apic(apicid);
 		}
 	}
-#ifdef CONFIG_X86_64
-restore_state:
-#endif
+
 	if (boot_error) {
 		/* Try to put things back the way they were before ... */
 		numa_remove_cpu(cpu); /* was set by numa_add_cpu */
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index f50280db0df..962f21f1d4d 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -5,6 +5,7 @@
 #define LOAD_OFFSET __START_KERNEL_map
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/asm-offsets.h>
 #include <asm/page.h>
 
 #undef i386	/* in case the preprocessor is a 32bit one */
@@ -215,10 +216,11 @@ SECTIONS
   /*
    * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
    * output PHDR, so the next output section - __data_nosave - should
-   * switch it back to data.init.
+   * switch it back to data.init.  Also, pda should be at the head of
+   * percpu area.  Preallocate it.
    */
   . = ALIGN(PAGE_SIZE);
-  PERCPU_VADDR(0, :percpu)
+  PERCPU_VADDR_PREALLOC(0, :percpu, pda_size)
 #else
   PERCPU(PAGE_SIZE)
 #endif
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index c44e2069c7c..83fa4236477 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -283,16 +283,6 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 	struct task_struct *idle = idle_task(cpu);
 	int rc;
 
-#ifdef CONFIG_X86_64
-	/* Allocate node local memory for AP pdas */
-	WARN_ON(cpu == 0);
-	if (cpu > 0) {
-		rc = get_local_pda(cpu);
-		if (rc)
-			return rc;
-	}
-#endif
-
 #ifdef CONFIG_X86_32
 	init_gdt(cpu);
 	per_cpu(current_task, cpu) = idle;
-- 
cgit v1.2.3


From 9939ddaff52787b2a7c1adf1b2afc95421aa0884 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: merge 64 and 32 SMP percpu handling

Now that pda is allocated as part of percpu, percpu doesn't need to be
accessed through pda.  Unify x86_64 SMP percpu access with x86_32 SMP
one.  Other than the segment register, operand size and the base of
percpu symbols, they behave identical now.

This patch replaces now unnecessary pda->data_offset with a dummy
field which is necessary to keep stack_canary at its place.  This
patch also moves per_cpu_offset initialization out of init_gdt() into
setup_per_cpu_areas().  Note that this change also necessitates
explicit per_cpu_offset initializations in voyager_smp.c.

With this change, x86_OP_percpu()'s are as efficient on x86_64 as on
x86_32 and also x86_64 can use assembly PER_CPU macros.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pda.h          |   3 +-
 arch/x86/include/asm/percpu.h       | 127 +++++++++++-------------------------
 arch/x86/kernel/asm-offsets_64.c    |   1 -
 arch/x86/kernel/entry_64.S          |   7 +-
 arch/x86/kernel/head64.c            |   2 -
 arch/x86/kernel/setup_percpu.c      |  15 +++--
 arch/x86/kernel/smpcommon.c         |   3 +-
 arch/x86/mach-voyager/voyager_smp.c |   2 +
 8 files changed, 55 insertions(+), 105 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 2d5b49c3248..e91558e3785 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -11,8 +11,7 @@
 /* Per processor datastructure. %gs points to it while the kernel runs */
 struct x8664_pda {
 	struct task_struct *pcurrent;	/* 0  Current process */
-	unsigned long data_offset;	/* 8 Per cpu data offset from linker
-					   address */
+	unsigned long dummy;
 	unsigned long kernelstack;	/* 16 top of kernel stack for current */
 	unsigned long oldrsp;		/* 24 user rsp for system call */
 	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0ed77cf33f7..556f84b9ea9 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -1,62 +1,13 @@
 #ifndef _ASM_X86_PERCPU_H
 #define _ASM_X86_PERCPU_H
 
-#ifndef __ASSEMBLY__
 #ifdef CONFIG_X86_64
-extern void load_pda_offset(int cpu);
+#define __percpu_seg		gs
+#define __percpu_mov_op		movq
 #else
-static inline void load_pda_offset(int cpu) { }
-#endif
-#endif
-
-#ifdef CONFIG_X86_64
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
-   in the PDA. Longer term the PDA and every per cpu variable
-   should be just put into a single section and referenced directly
-   from %gs */
-
-#ifdef CONFIG_SMP
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
+#define __percpu_seg		fs
+#define __percpu_mov_op		movl
 #endif
-#include <asm-generic/percpu.h>
-
-DECLARE_PER_CPU(struct x8664_pda, pda);
-
-/*
- * These are supposed to be implemented as a single instruction which
- * operates on the per-cpu data base segment.  x86-64 doesn't have
- * that yet, so this is a fairly inefficient workaround for the
- * meantime.  The single instruction is atomic with respect to
- * preemption and interrupts, so we need to explicitly disable
- * interrupts here to achieve the same effect.  However, because it
- * can be used from within interrupt-disable/enable, we can't actually
- * disable interrupts; disabling preemption is enough.
- */
-#define x86_read_percpu(var)						\
-	({								\
-		typeof(per_cpu_var(var)) __tmp;				\
-		preempt_disable();					\
-		__tmp = __get_cpu_var(var);				\
-		preempt_enable();					\
-		__tmp;							\
-	})
-
-#define x86_write_percpu(var, val)					\
-	do {								\
-		preempt_disable();					\
-		__get_cpu_var(var) = (val);				\
-		preempt_enable();					\
-	} while(0)
-
-#else /* CONFIG_X86_64 */
 
 #ifdef __ASSEMBLY__
 
@@ -73,42 +24,26 @@ DECLARE_PER_CPU(struct x8664_pda, pda);
  *    PER_CPU(cpu_gdt_descr, %ebx)
  */
 #ifdef CONFIG_SMP
-#define PER_CPU(var, reg)				\
-	movl %fs:per_cpu__##this_cpu_off, reg;		\
+#define PER_CPU(var, reg)						\
+	__percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg;	\
 	lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var)	%fs:per_cpu__##var
+#define PER_CPU_VAR(var)	%__percpu_seg:per_cpu__##var
 #else /* ! SMP */
-#define PER_CPU(var, reg)			\
-	movl $per_cpu__##var, reg
+#define PER_CPU(var, reg)						\
+	__percpu_mov_op $per_cpu__##var, reg
 #define PER_CPU_VAR(var)	per_cpu__##var
 #endif	/* SMP */
 
 #else /* ...!ASSEMBLY */
 
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-
-#define __my_cpu_offset x86_read_percpu(this_cpu_off)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
+#include <linux/stringify.h>
 
-#else  /* !SMP */
-
-#define __percpu_seg ""
-
-#endif	/* SMP */
+#ifdef CONFIG_SMP
+#define __percpu_seg_str	"%%"__stringify(__percpu_seg)":"
+#define __my_cpu_offset		x86_read_percpu(this_cpu_off)
+#else
+#define __percpu_seg_str
+#endif
 
 #include <asm-generic/percpu.h>
 
@@ -128,20 +63,25 @@ do {							\
 	}						\
 	switch (sizeof(var)) {				\
 	case 1:						\
-		asm(op "b %1,"__percpu_seg"%0"		\
+		asm(op "b %1,"__percpu_seg_str"%0"	\
 		    : "+m" (var)			\
 		    : "ri" ((T__)val));			\
 		break;					\
 	case 2:						\
-		asm(op "w %1,"__percpu_seg"%0"		\
+		asm(op "w %1,"__percpu_seg_str"%0"	\
 		    : "+m" (var)			\
 		    : "ri" ((T__)val));			\
 		break;					\
 	case 4:						\
-		asm(op "l %1,"__percpu_seg"%0"		\
+		asm(op "l %1,"__percpu_seg_str"%0"	\
 		    : "+m" (var)			\
 		    : "ri" ((T__)val));			\
 		break;					\
+	case 8:						\
+		asm(op "q %1,"__percpu_seg_str"%0"	\
+		    : "+m" (var)			\
+		    : "r" ((T__)val));			\
+		break;					\
 	default: __bad_percpu_size();			\
 	}						\
 } while (0)
@@ -151,17 +91,22 @@ do {							\
 	typeof(var) ret__;				\
 	switch (sizeof(var)) {				\
 	case 1:						\
-		asm(op "b "__percpu_seg"%1,%0"		\
+		asm(op "b "__percpu_seg_str"%1,%0"	\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 2:						\
-		asm(op "w "__percpu_seg"%1,%0"		\
+		asm(op "w "__percpu_seg_str"%1,%0"	\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 4:						\
-		asm(op "l "__percpu_seg"%1,%0"		\
+		asm(op "l "__percpu_seg_str"%1,%0"	\
+		    : "=r" (ret__)			\
+		    : "m" (var));			\
+		break;					\
+	case 8:						\
+		asm(op "q "__percpu_seg_str"%1,%0"	\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
@@ -175,8 +120,14 @@ do {							\
 #define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
 #define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
 #define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
+
+#ifdef CONFIG_X86_64
+extern void load_pda_offset(int cpu);
+#else
+static inline void load_pda_offset(int cpu) { }
+#endif
+
 #endif /* !__ASSEMBLY__ */
-#endif /* !CONFIG_X86_64 */
 
 #ifdef CONFIG_SMP
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index f8d1b047ef4..f4cc81bfbf8 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -55,7 +55,6 @@ int main(void)
 	ENTRY(irqcount);
 	ENTRY(cpunumber);
 	ENTRY(irqstackptr);
-	ENTRY(data_offset);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
 #undef ENTRY
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index e28c7a98779..4833f3a1965 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -52,6 +52,7 @@
 #include <asm/irqflags.h>
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
+#include <asm/percpu.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
 #include <linux/elf-em.h>
@@ -1072,10 +1073,10 @@ ENTRY(\sym)
 	TRACE_IRQS_OFF
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
-	movq %gs:pda_data_offset, %rbp
-	subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+	PER_CPU(init_tss, %rbp)
+	subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp)
 	call \do_sym
-	addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+	addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp)
 	jmp paranoid_exit	/* %ebx: no swapgs flag */
 	CFI_ENDPROC
 END(\sym)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 1a311293f73..e99b661a97f 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -38,8 +38,6 @@ void __init x86_64_init_pda(void)
 #else
 	cpu_pda(0) = &_boot_cpu_pda;
 #endif
-	cpu_pda(0)->data_offset =
-		(unsigned long)(__per_cpu_load - __per_cpu_start);
 	pda_init(0);
 }
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 63d46280227..be1ff34db11 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -125,14 +125,14 @@ static void __init setup_per_cpu_maps(void)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-/*
- * Great future not-so-futuristic plan: make i386 and x86_64 do it
- * the same way
- */
+#ifdef CONFIG_X86_64
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
+	[0] = (unsigned long)__per_cpu_load,
+};
+#else
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(__per_cpu_offset);
 #endif
+EXPORT_SYMBOL(__per_cpu_offset);
 
 /*
  * Great future plan:
@@ -178,6 +178,7 @@ void __init setup_per_cpu_areas(void)
 #endif
 
 		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
+		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 #ifdef CONFIG_X86_64
 		cpu_pda(cpu) = (void *)ptr;
 
@@ -190,7 +191,7 @@ void __init setup_per_cpu_areas(void)
 		else
 			memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu)));
 #endif
-		per_cpu_offset(cpu) = ptr - __per_cpu_start;
+		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 397e309839d..84395fabc41 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -4,10 +4,10 @@
 #include <linux/module.h>
 #include <asm/smp.h>
 
-#ifdef CONFIG_X86_32
 DEFINE_PER_CPU(unsigned long, this_cpu_off);
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
+#ifdef CONFIG_X86_32
 /*
  * Initialize the CPU's GDT.  This is either the boot CPU doing itself
  * (still using the master per-cpu area), or a CPU doing it for a
@@ -24,7 +24,6 @@ __cpuinit void init_gdt(int cpu)
 	write_gdt_entry(get_cpu_gdt_table(cpu),
 			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
 
-	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	per_cpu(cpu_number, cpu) = cpu;
 }
 #endif
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 9840b7ec749..1a48368acb0 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -531,6 +531,7 @@ static void __init do_boot_cpu(__u8 cpu)
 	stack_start.sp = (void *)idle->thread.sp;
 
 	init_gdt(cpu);
+	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	per_cpu(current_task, cpu) = idle;
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	irq_ctx_init(cpu);
@@ -1748,6 +1749,7 @@ static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
 static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 {
 	init_gdt(smp_processor_id());
+	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	switch_to_new_gdt();
 
 	cpu_set(smp_processor_id(), cpu_online_map);
-- 
cgit v1.2.3


From b12d8db8fbfaed1e8222a15333a3645599636854 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: make pda a percpu variable

[ Based on original patch from Christoph Lameter and Mike Travis. ]

As pda is now allocated in percpu area, it can easily be made a proper
percpu variable.  Make it so by defining per cpu symbol from linker
script and declaring it in C code for SMP and simply defining it for
UP.  This change cleans up code and brings SMP and UP closer a bit.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pda.h       |  5 +++--
 arch/x86/kernel/cpu/common.c     |  3 ---
 arch/x86/kernel/head64.c         | 10 ----------
 arch/x86/kernel/head_64.S        |  5 +++--
 arch/x86/kernel/setup_percpu.c   | 16 ++++++++++++++--
 arch/x86/kernel/vmlinux_64.lds.S |  4 +++-
 6 files changed, 23 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index e91558e3785..66ae1043393 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -7,6 +7,7 @@
 #include <linux/cache.h>
 #include <linux/threads.h>
 #include <asm/page.h>
+#include <asm/percpu.h>
 
 /* Per processor datastructure. %gs points to it while the kernel runs */
 struct x8664_pda {
@@ -39,10 +40,10 @@ struct x8664_pda {
 	unsigned irq_spurious_count;
 } ____cacheline_aligned_in_smp;
 
-extern struct x8664_pda *_cpu_pda[NR_CPUS];
+DECLARE_PER_CPU(struct x8664_pda, __pda);
 extern void pda_init(int);
 
-#define cpu_pda(i) (_cpu_pda[i])
+#define cpu_pda(cpu)		(&per_cpu(__pda, cpu))
 
 /*
  * There is no fast way to get the base address of the PDA, all the accesses
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7041acdf557..c49498d4083 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -879,9 +879,6 @@ static __init int setup_disablecpuid(char *arg)
 __setup("clearcpuid=", setup_disablecpuid);
 
 #ifdef CONFIG_X86_64
-struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
 static char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index e99b661a97f..71b6f6ec96a 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -26,18 +26,8 @@
 #include <asm/bios_ebda.h>
 #include <asm/trampoline.h>
 
-#ifndef CONFIG_SMP
-/* boot cpu pda, referenced by head_64.S to initialize %gs on UP */
-struct x8664_pda _boot_cpu_pda;
-#endif
-
 void __init x86_64_init_pda(void)
 {
-#ifdef CONFIG_SMP
-	cpu_pda(0) = (void *)__per_cpu_load;
-#else
-	cpu_pda(0) = &_boot_cpu_pda;
-#endif
 	pda_init(0);
 }
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 7a995d0e9f7..c8ace880661 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -19,6 +19,7 @@
 #include <asm/msr.h>
 #include <asm/cache.h>
 #include <asm/processor-flags.h>
+#include <asm/percpu.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/asm-offsets.h>
@@ -250,7 +251,7 @@ ENTRY(secondary_startup_64)
 	 * secondary CPU,initial_gs should be set to its pda address
 	 * before the CPU runs this code.
 	 *
-	 * On UP, initial_gs points to _boot_cpu_pda and doesn't
+	 * On UP, initial_gs points to PER_CPU_VAR(__pda) and doesn't
 	 * change.
 	 */
 	movl	$MSR_GS_BASE,%ecx
@@ -284,7 +285,7 @@ ENTRY(secondary_startup_64)
 #ifdef CONFIG_SMP
 	.quad	__per_cpu_load
 #else
-	.quad	_boot_cpu_pda
+	.quad	PER_CPU_VAR(__pda)
 #endif
 	__FINITDATA
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index be1ff34db11..daeedf82c15 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -66,6 +66,16 @@ static void __init setup_node_to_cpumask_map(void);
 static inline void setup_node_to_cpumask_map(void) { }
 #endif
 
+/*
+ * Define load_pda_offset() and per-cpu __pda for x86_64.
+ * load_pda_offset() is responsible for loading the offset of pda into
+ * %gs.
+ *
+ * On SMP, pda offset also duals as percpu base address and thus it
+ * should be at the start of per-cpu area.  To achieve this, it's
+ * preallocated in vmlinux_64.lds.S directly instead of using
+ * DEFINE_PER_CPU().
+ */
 #ifdef CONFIG_X86_64
 void __cpuinit load_pda_offset(int cpu)
 {
@@ -74,6 +84,10 @@ void __cpuinit load_pda_offset(int cpu)
 	wrmsrl(MSR_GS_BASE, cpu_pda(cpu));
 	mb();
 }
+#ifndef CONFIG_SMP
+DEFINE_PER_CPU(struct x8664_pda, __pda);
+EXPORT_PER_CPU_SYMBOL(__pda);
+#endif
 
 #endif /* CONFIG_SMP && CONFIG_X86_64 */
 
@@ -180,8 +194,6 @@ void __init setup_per_cpu_areas(void)
 		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 #ifdef CONFIG_X86_64
-		cpu_pda(cpu) = (void *)ptr;
-
 		/*
 		 * CPU0 modified pda in the init data area, reload pda
 		 * offset for CPU0 and clear the area for others.
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 962f21f1d4d..d2a0baa87d1 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -217,10 +217,12 @@ SECTIONS
    * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
    * output PHDR, so the next output section - __data_nosave - should
    * switch it back to data.init.  Also, pda should be at the head of
-   * percpu area.  Preallocate it.
+   * percpu area.  Preallocate it and define the percpu offset symbol
+   * so that it can be accessed as a percpu variable.
    */
   . = ALIGN(PAGE_SIZE);
   PERCPU_VADDR_PREALLOC(0, :percpu, pda_size)
+  per_cpu____pda = __per_cpu_start;
 #else
   PERCPU(PAGE_SIZE)
 #endif
-- 
cgit v1.2.3


From 49357d19e4fb31e28796eaff83499e7584c26878 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: convert pda ops to wrappers around x86 percpu accessors

pda is now a percpu variable and there's no reason it can't use plain
x86 percpu accessors.  Add x86_test_and_clear_bit_percpu() and replace
pda op implementations with wrappers around x86 percpu accessors.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pda.h       | 88 +++-------------------------------------
 arch/x86/include/asm/percpu.h    | 10 +++++
 arch/x86/kernel/vmlinux_64.lds.S |  1 -
 arch/x86/kernel/x8664_ksyms_64.c |  2 -
 4 files changed, 16 insertions(+), 85 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 66ae1043393..e3d3a081d79 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -45,91 +45,15 @@ extern void pda_init(int);
 
 #define cpu_pda(cpu)		(&per_cpu(__pda, cpu))
 
-/*
- * There is no fast way to get the base address of the PDA, all the accesses
- * have to mention %fs/%gs.  So it needs to be done this Torvaldian way.
- */
-extern void __bad_pda_field(void) __attribute__((noreturn));
-
-/*
- * proxy_pda doesn't actually exist, but tell gcc it is accessed for
- * all PDA accesses so it gets read/write dependencies right.
- */
-extern struct x8664_pda _proxy_pda;
-
-#define pda_offset(field) offsetof(struct x8664_pda, field)
-
-#define pda_to_op(op, field, val)					\
-do {									\
-	typedef typeof(_proxy_pda.field) T__;				\
-	if (0) { T__ tmp__; tmp__ = (val); }	/* type checking */	\
-	switch (sizeof(_proxy_pda.field)) {				\
-	case 2:								\
-		asm(op "w %1,%%gs:%c2" :				\
-		    "+m" (_proxy_pda.field) :				\
-		    "ri" ((T__)val),					\
-		    "i"(pda_offset(field)));				\
-		break;							\
-	case 4:								\
-		asm(op "l %1,%%gs:%c2" :				\
-		    "+m" (_proxy_pda.field) :				\
-		    "ri" ((T__)val),					\
-		    "i" (pda_offset(field)));				\
-		break;							\
-	case 8:								\
-		asm(op "q %1,%%gs:%c2":					\
-		    "+m" (_proxy_pda.field) :				\
-		    "r" ((T__)val),					\
-		    "i"(pda_offset(field)));				\
-		break;							\
-	default:							\
-		__bad_pda_field();					\
-	}								\
-} while (0)
-
-#define pda_from_op(op, field)			\
-({						\
-	typeof(_proxy_pda.field) ret__;		\
-	switch (sizeof(_proxy_pda.field)) {	\
-	case 2:					\
-		asm(op "w %%gs:%c1,%0" :	\
-		    "=r" (ret__) :		\
-		    "i" (pda_offset(field)),	\
-		    "m" (_proxy_pda.field));	\
-		break;				\
-	case 4:					\
-		asm(op "l %%gs:%c1,%0":		\
-		    "=r" (ret__):		\
-		    "i" (pda_offset(field)),	\
-		    "m" (_proxy_pda.field));	\
-		break;				\
-	case 8:					\
-		asm(op "q %%gs:%c1,%0":		\
-		    "=r" (ret__) :		\
-		    "i" (pda_offset(field)),	\
-		    "m" (_proxy_pda.field));	\
-		break;				\
-	default:				\
-		__bad_pda_field();		\
-	}					\
-	ret__;					\
-})
-
-#define read_pda(field)		pda_from_op("mov", field)
-#define write_pda(field, val)	pda_to_op("mov", field, val)
-#define add_pda(field, val)	pda_to_op("add", field, val)
-#define sub_pda(field, val)	pda_to_op("sub", field, val)
-#define or_pda(field, val)	pda_to_op("or", field, val)
+#define read_pda(field)		x86_read_percpu(__pda.field)
+#define write_pda(field, val)	x86_write_percpu(__pda.field, val)
+#define add_pda(field, val)	x86_add_percpu(__pda.field, val)
+#define sub_pda(field, val)	x86_sub_percpu(__pda.field, val)
+#define or_pda(field, val)	x86_or_percpu(__pda.field, val)
 
 /* This is not atomic against other CPUs -- CPU preemption needs to be off */
 #define test_and_clear_bit_pda(bit, field)				\
-({									\
-	int old__;							\
-	asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0"			\
-		     : "=r" (old__), "+m" (_proxy_pda.field)		\
-		     : "dIr" (bit), "i" (pda_offset(field)) : "memory");\
-	old__;								\
-})
+	x86_test_and_clear_bit_percpu(bit, __pda.field)
 
 #endif
 
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 556f84b9ea9..328b31a429d 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -121,6 +121,16 @@ do {							\
 #define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
 #define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
 
+/* This is not atomic against other CPUs -- CPU preemption needs to be off */
+#define x86_test_and_clear_bit_percpu(bit, var)				\
+({									\
+	int old__;							\
+	asm volatile("btr %1,"__percpu_seg_str"%c2\n\tsbbl %0,%0"	\
+		     : "=r" (old__)					\
+		     : "dIr" (bit), "i" (&per_cpu__##var) : "memory");	\
+	old__;								\
+})
+
 #ifdef CONFIG_X86_64
 extern void load_pda_offset(int cpu);
 #else
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index d2a0baa87d1..a09abb8fb97 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -14,7 +14,6 @@ OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
 OUTPUT_ARCH(i386:x86-64)
 ENTRY(phys_startup_64)
 jiffies_64 = jiffies;
-_proxy_pda = 1;
 PHDRS {
 	text PT_LOAD FLAGS(5);	/* R_E */
 	data PT_LOAD FLAGS(7);	/* RWE */
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 695e426aa35..3909e3ba5ce 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -58,5 +58,3 @@ EXPORT_SYMBOL(__memcpy);
 EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(init_level4_pgt);
 EXPORT_SYMBOL(load_gs_index);
-
-EXPORT_SYMBOL(_proxy_pda);
-- 
cgit v1.2.3


From 004aa322f855a765741d9437a98dd8fe2e4f32a6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 13 Jan 2009 20:41:35 +0900
Subject: x86: misc clean up after the percpu update

Do the following cleanups:

* kill x86_64_init_pda() which now is equivalent to pda_init()

* use per_cpu_offset() instead of cpu_pda() when initializing
  initial_gs

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/setup.h | 1 -
 arch/x86/kernel/acpi/sleep.c | 2 +-
 arch/x86/kernel/head64.c     | 7 +------
 arch/x86/kernel/smpboot.c    | 2 +-
 arch/x86/xen/enlighten.c     | 2 +-
 5 files changed, 4 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index ebe858cdc8a..536949749bc 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -100,7 +100,6 @@ extern unsigned long init_pg_tables_start;
 extern unsigned long init_pg_tables_end;
 
 #else
-void __init x86_64_init_pda(void);
 void __init x86_64_start_kernel(char *real_mode);
 void __init x86_64_start_reservations(char *real_mode_data);
 
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 9ff67f8dc2c..4abff454c55 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -101,7 +101,7 @@ int acpi_save_state_mem(void)
 	stack_start.sp = temp_stack + sizeof(temp_stack);
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_table(smp_processor_id());
-	initial_gs = (unsigned long)cpu_pda(smp_processor_id());
+	initial_gs = per_cpu_offset(smp_processor_id());
 #endif
 	initial_code = (unsigned long)wakeup_long64;
 	saved_magic = 0x123456789abcdef0;
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 71b6f6ec96a..af67d3227ea 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -26,11 +26,6 @@
 #include <asm/bios_ebda.h>
 #include <asm/trampoline.h>
 
-void __init x86_64_init_pda(void)
-{
-	pda_init(0);
-}
-
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -96,7 +91,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	if (console_loglevel == 10)
 		early_printk("Kernel alive\n");
 
-	x86_64_init_pda();
+	pda_init(0);
 
 	x86_64_start_reservations(real_mode_data);
 }
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f2f77ca494d..2f0e0f1090f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -798,7 +798,7 @@ do_rest:
 #else
 	cpu_pda(cpu)->pcurrent = c_idle.idle;
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
-	initial_gs = (unsigned long)cpu_pda(cpu);
+	initial_gs = per_cpu_offset(cpu);
 #endif
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	initial_code = (unsigned long)start_secondary;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 965539ec425..312414ef936 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1645,7 +1645,7 @@ asmlinkage void __init xen_start_kernel(void)
 #ifdef CONFIG_X86_64
 	/* Disable until direct per-cpu data access. */
 	have_vcpu_info_placement = 0;
-	x86_64_init_pda();
+	pda_init(0);
 #endif
 
 	xen_smp_init();
-- 
cgit v1.2.3


From 6dbde3530850d4d8bfc1b6bd4006d92786a2787f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 15 Jan 2009 22:15:53 +0900
Subject: percpu: add optimized generic percpu accessors

It is an optimization and a cleanup, and adds the following new
generic percpu methods:

  percpu_read()
  percpu_write()
  percpu_add()
  percpu_sub()
  percpu_and()
  percpu_or()
  percpu_xor()

and implements support for them on x86. (other architectures will fall
back to a default implementation)

The advantage is that for example to read a local percpu variable,
instead of this sequence:

 return __get_cpu_var(var);

 ffffffff8102ca2b:	48 8b 14 fd 80 09 74 	mov    -0x7e8bf680(,%rdi,8),%rdx
 ffffffff8102ca32:	81
 ffffffff8102ca33:	48 c7 c0 d8 59 00 00 	mov    $0x59d8,%rax
 ffffffff8102ca3a:	48 8b 04 10          	mov    (%rax,%rdx,1),%rax

We can get a single instruction by using the optimized variants:

 return percpu_read(var);

 ffffffff8102ca3f:	65 48 8b 05 91 8f fd 	mov    %gs:0x7efd8f91(%rip),%rax

I also cleaned up the x86-specific APIs and made the x86 code use
these new generic percpu primitives.

tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out
    * added percpu_and() for completeness's sake
    * made generic percpu ops atomic against preemption

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/current.h        |  2 +-
 arch/x86/include/asm/irq_regs_32.h    |  4 ++--
 arch/x86/include/asm/mmu_context_32.h | 12 ++++++------
 arch/x86/include/asm/pda.h            | 10 +++++-----
 arch/x86/include/asm/percpu.h         | 24 +++++++++++++-----------
 arch/x86/include/asm/smp.h            |  2 +-
 arch/x86/kernel/process_32.c          |  2 +-
 arch/x86/kernel/tlb_32.c              | 10 +++++-----
 arch/x86/mach-voyager/voyager_smp.c   |  4 ++--
 arch/x86/xen/enlighten.c              | 14 +++++++-------
 arch/x86/xen/irq.c                    |  8 ++++----
 arch/x86/xen/mmu.c                    |  2 +-
 arch/x86/xen/multicalls.h             |  2 +-
 arch/x86/xen/smp.c                    |  2 +-
 14 files changed, 50 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
index 0930b4f8d67..0728480f5c5 100644
--- a/arch/x86/include/asm/current.h
+++ b/arch/x86/include/asm/current.h
@@ -10,7 +10,7 @@ struct task_struct;
 DECLARE_PER_CPU(struct task_struct *, current_task);
 static __always_inline struct task_struct *get_current(void)
 {
-	return x86_read_percpu(current_task);
+	return percpu_read(current_task);
 }
 
 #else /* X86_32 */
diff --git a/arch/x86/include/asm/irq_regs_32.h b/arch/x86/include/asm/irq_regs_32.h
index 86afd747345..d7ed33ee94e 100644
--- a/arch/x86/include/asm/irq_regs_32.h
+++ b/arch/x86/include/asm/irq_regs_32.h
@@ -15,7 +15,7 @@ DECLARE_PER_CPU(struct pt_regs *, irq_regs);
 
 static inline struct pt_regs *get_irq_regs(void)
 {
-	return x86_read_percpu(irq_regs);
+	return percpu_read(irq_regs);
 }
 
 static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
@@ -23,7 +23,7 @@ static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
 	struct pt_regs *old_regs;
 
 	old_regs = get_irq_regs();
-	x86_write_percpu(irq_regs, new_regs);
+	percpu_write(irq_regs, new_regs);
 
 	return old_regs;
 }
diff --git a/arch/x86/include/asm/mmu_context_32.h b/arch/x86/include/asm/mmu_context_32.h
index 7e98ce1d2c0..08b53454f83 100644
--- a/arch/x86/include/asm/mmu_context_32.h
+++ b/arch/x86/include/asm/mmu_context_32.h
@@ -4,8 +4,8 @@
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
 #ifdef CONFIG_SMP
-	if (x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_OK)
-		x86_write_percpu(cpu_tlbstate.state, TLBSTATE_LAZY);
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
+		percpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
 #endif
 }
 
@@ -19,8 +19,8 @@ static inline void switch_mm(struct mm_struct *prev,
 		/* stop flush ipis for the previous mm */
 		cpu_clear(cpu, prev->cpu_vm_mask);
 #ifdef CONFIG_SMP
-		x86_write_percpu(cpu_tlbstate.state, TLBSTATE_OK);
-		x86_write_percpu(cpu_tlbstate.active_mm, next);
+		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		percpu_write(cpu_tlbstate.active_mm, next);
 #endif
 		cpu_set(cpu, next->cpu_vm_mask);
 
@@ -35,8 +35,8 @@ static inline void switch_mm(struct mm_struct *prev,
 	}
 #ifdef CONFIG_SMP
 	else {
-		x86_write_percpu(cpu_tlbstate.state, TLBSTATE_OK);
-		BUG_ON(x86_read_percpu(cpu_tlbstate.active_mm) != next);
+		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
 
 		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
 			/* We were in lazy tlb mode and leave_mm disabled
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index e3d3a081d79..47f274fe695 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -45,11 +45,11 @@ extern void pda_init(int);
 
 #define cpu_pda(cpu)		(&per_cpu(__pda, cpu))
 
-#define read_pda(field)		x86_read_percpu(__pda.field)
-#define write_pda(field, val)	x86_write_percpu(__pda.field, val)
-#define add_pda(field, val)	x86_add_percpu(__pda.field, val)
-#define sub_pda(field, val)	x86_sub_percpu(__pda.field, val)
-#define or_pda(field, val)	x86_or_percpu(__pda.field, val)
+#define read_pda(field)		percpu_read(__pda.field)
+#define write_pda(field, val)	percpu_write(__pda.field, val)
+#define add_pda(field, val)	percpu_add(__pda.field, val)
+#define sub_pda(field, val)	percpu_sub(__pda.field, val)
+#define or_pda(field, val)	percpu_or(__pda.field, val)
 
 /* This is not atomic against other CPUs -- CPU preemption needs to be off */
 #define test_and_clear_bit_pda(bit, field)				\
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 328b31a429d..03aa4b00a1c 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -40,16 +40,11 @@
 
 #ifdef CONFIG_SMP
 #define __percpu_seg_str	"%%"__stringify(__percpu_seg)":"
-#define __my_cpu_offset		x86_read_percpu(this_cpu_off)
+#define __my_cpu_offset		percpu_read(this_cpu_off)
 #else
 #define __percpu_seg_str
 #endif
 
-#include <asm-generic/percpu.h>
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
 /* For arch-specific code, we can use direct single-insn ops (they
  * don't give an lvalue though). */
 extern void __bad_percpu_size(void);
@@ -115,11 +110,13 @@ do {							\
 	ret__;						\
 })
 
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
+#define percpu_read(var)	percpu_from_op("mov", per_cpu__##var)
+#define percpu_write(var, val)	percpu_to_op("mov", per_cpu__##var, val)
+#define percpu_add(var, val)	percpu_to_op("add", per_cpu__##var, val)
+#define percpu_sub(var, val)	percpu_to_op("sub", per_cpu__##var, val)
+#define percpu_and(var, val)	percpu_to_op("and", per_cpu__##var, val)
+#define percpu_or(var, val)	percpu_to_op("or", per_cpu__##var, val)
+#define percpu_xor(var, val)	percpu_to_op("xor", per_cpu__##var, val)
 
 /* This is not atomic against other CPUs -- CPU preemption needs to be off */
 #define x86_test_and_clear_bit_percpu(bit, var)				\
@@ -131,6 +128,11 @@ do {							\
 	old__;								\
 })
 
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
 #ifdef CONFIG_X86_64
 extern void load_pda_offset(int cpu);
 #else
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 127415402ea..c7bbbbe65d3 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -160,7 +160,7 @@ extern unsigned disabled_cpus __cpuinitdata;
  * from the initial startup. We map APIC_BASE very early in page_setup(),
  * so this is correct in the x86 case.
  */
-#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
+#define raw_smp_processor_id() (percpu_read(cpu_number))
 extern int safe_smp_processor_id(void);
 
 #elif defined(CONFIG_X86_64_SMP)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a546f55c77b..77d546817d9 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -591,7 +591,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	if (prev->gs | next->gs)
 		loadsegment(gs, next->gs);
 
-	x86_write_percpu(current_task, next_p);
+	percpu_write(current_task, next_p);
 
 	return prev_p;
 }
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index ec53818f4e3..e65449d0f7d 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -34,8 +34,8 @@ static DEFINE_SPINLOCK(tlbstate_lock);
  */
 void leave_mm(int cpu)
 {
-	BUG_ON(x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_OK);
-	cpu_clear(cpu, x86_read_percpu(cpu_tlbstate.active_mm)->cpu_vm_mask);
+	BUG_ON(percpu_read(cpu_tlbstate.state) == TLBSTATE_OK);
+	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
 	load_cr3(swapper_pg_dir);
 }
 EXPORT_SYMBOL_GPL(leave_mm);
@@ -103,8 +103,8 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
 		 * BUG();
 		 */
 
-	if (flush_mm == x86_read_percpu(cpu_tlbstate.active_mm)) {
-		if (x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_OK) {
+	if (flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
+		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
 			if (flush_va == TLB_FLUSH_ALL)
 				local_flush_tlb();
 			else
@@ -222,7 +222,7 @@ static void do_flush_tlb_all(void *info)
 	unsigned long cpu = smp_processor_id();
 
 	__flush_tlb_all();
-	if (x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_LAZY)
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
 		leave_mm(cpu);
 }
 
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 1a48368acb0..96f15b09a4c 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -402,7 +402,7 @@ void __init find_smp_config(void)
 	     VOYAGER_SUS_IN_CONTROL_PORT);
 
 	current_thread_info()->cpu = boot_cpu_id;
-	x86_write_percpu(cpu_number, boot_cpu_id);
+	percpu_write(cpu_number, boot_cpu_id);
 }
 
 /*
@@ -1782,7 +1782,7 @@ static void __init voyager_smp_cpus_done(unsigned int max_cpus)
 void __init smp_setup_processor_id(void)
 {
 	current_thread_info()->cpu = hard_smp_processor_id();
-	x86_write_percpu(cpu_number, hard_smp_processor_id());
+	percpu_write(cpu_number, hard_smp_processor_id());
 }
 
 static void voyager_send_call_func(cpumask_t callmask)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 312414ef936..75b94139e1f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -695,17 +695,17 @@ static void xen_write_cr0(unsigned long cr0)
 
 static void xen_write_cr2(unsigned long cr2)
 {
-	x86_read_percpu(xen_vcpu)->arch.cr2 = cr2;
+	percpu_read(xen_vcpu)->arch.cr2 = cr2;
 }
 
 static unsigned long xen_read_cr2(void)
 {
-	return x86_read_percpu(xen_vcpu)->arch.cr2;
+	return percpu_read(xen_vcpu)->arch.cr2;
 }
 
 static unsigned long xen_read_cr2_direct(void)
 {
-	return x86_read_percpu(xen_vcpu_info.arch.cr2);
+	return percpu_read(xen_vcpu_info.arch.cr2);
 }
 
 static void xen_write_cr4(unsigned long cr4)
@@ -718,12 +718,12 @@ static void xen_write_cr4(unsigned long cr4)
 
 static unsigned long xen_read_cr3(void)
 {
-	return x86_read_percpu(xen_cr3);
+	return percpu_read(xen_cr3);
 }
 
 static void set_current_cr3(void *v)
 {
-	x86_write_percpu(xen_current_cr3, (unsigned long)v);
+	percpu_write(xen_current_cr3, (unsigned long)v);
 }
 
 static void __xen_write_cr3(bool kernel, unsigned long cr3)
@@ -748,7 +748,7 @@ static void __xen_write_cr3(bool kernel, unsigned long cr3)
 	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
 
 	if (kernel) {
-		x86_write_percpu(xen_cr3, cr3);
+		percpu_write(xen_cr3, cr3);
 
 		/* Update xen_current_cr3 once the batch has actually
 		   been submitted. */
@@ -764,7 +764,7 @@ static void xen_write_cr3(unsigned long cr3)
 
 	/* Update while interrupts are disabled, so its atomic with
 	   respect to ipis */
-	x86_write_percpu(xen_cr3, cr3);
+	percpu_write(xen_cr3, cr3);
 
 	__xen_write_cr3(true, cr3);
 
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index bb042608c60..2e8271431e1 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -39,7 +39,7 @@ static unsigned long xen_save_fl(void)
 	struct vcpu_info *vcpu;
 	unsigned long flags;
 
-	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu = percpu_read(xen_vcpu);
 
 	/* flag has opposite sense of mask */
 	flags = !vcpu->evtchn_upcall_mask;
@@ -62,7 +62,7 @@ static void xen_restore_fl(unsigned long flags)
 	   make sure we're don't switch CPUs between getting the vcpu
 	   pointer and updating the mask. */
 	preempt_disable();
-	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu = percpu_read(xen_vcpu);
 	vcpu->evtchn_upcall_mask = flags;
 	preempt_enable_no_resched();
 
@@ -83,7 +83,7 @@ static void xen_irq_disable(void)
 	   make sure we're don't switch CPUs between getting the vcpu
 	   pointer and updating the mask. */
 	preempt_disable();
-	x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
+	percpu_read(xen_vcpu)->evtchn_upcall_mask = 1;
 	preempt_enable_no_resched();
 }
 
@@ -96,7 +96,7 @@ static void xen_irq_enable(void)
 	   the caller is confused and is trying to re-enable interrupts
 	   on an indeterminate processor. */
 
-	vcpu = x86_read_percpu(xen_vcpu);
+	vcpu = percpu_read(xen_vcpu);
 	vcpu->evtchn_upcall_mask = 0;
 
 	/* Doesn't matter if we get preempted here, because any
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 503c240e26c..7bc7852cc5c 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1074,7 +1074,7 @@ static void drop_other_mm_ref(void *info)
 
 	/* If this cpu still has a stale cr3 reference, then make sure
 	   it has been flushed. */
-	if (x86_read_percpu(xen_current_cr3) == __pa(mm->pgd)) {
+	if (percpu_read(xen_current_cr3) == __pa(mm->pgd)) {
 		load_cr3(swapper_pg_dir);
 		arch_flush_lazy_cpu_mode();
 	}
diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h
index 85893824161..e786fa7f261 100644
--- a/arch/x86/xen/multicalls.h
+++ b/arch/x86/xen/multicalls.h
@@ -39,7 +39,7 @@ static inline void xen_mc_issue(unsigned mode)
 		xen_mc_flush();
 
 	/* restore flags saved in xen_mc_batch */
-	local_irq_restore(x86_read_percpu(xen_mc_irq_flags));
+	local_irq_restore(percpu_read(xen_mc_irq_flags));
 }
 
 /* Set up a callback to be called when the current batch is flushed */
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 83fa4236477..3bfd6dd0b47 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -78,7 +78,7 @@ static __cpuinit void cpu_bringup(void)
 	xen_setup_cpu_clockevents();
 
 	cpu_set(cpu, cpu_online_map);
-	x86_write_percpu(cpu_state, CPU_ONLINE);
+	percpu_write(cpu_state, CPU_ONLINE);
 	wmb();
 
 	/* We can take interrupts now: we're officially "up". */
-- 
cgit v1.2.3


From a338af2c648f5e07c582154745a6c60cd2d8bf12 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 16 Jan 2009 11:19:03 +0900
Subject: x86: fix build bug introduced during merge

EXPORT_PER_CPU_SYMBOL() got misplaced during merge leading to build
failure.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index daeedf82c15..b5c35af2011 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -86,9 +86,8 @@ void __cpuinit load_pda_offset(int cpu)
 }
 #ifndef CONFIG_SMP
 DEFINE_PER_CPU(struct x8664_pda, __pda);
-EXPORT_PER_CPU_SYMBOL(__pda);
 #endif
-
+EXPORT_PER_CPU_SYMBOL(__pda);
 #endif /* CONFIG_SMP && CONFIG_X86_64 */
 
 #ifdef CONFIG_X86_64
-- 
cgit v1.2.3


From cd3adf52309867955d6e2175246b526442235805 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 16 Jan 2009 12:11:43 +0900
Subject: x86_64: initialize this_cpu_off to __per_cpu_load

On x86_64, if get_per_cpu_var() is used before per cpu area is setup
(if lockdep is turned on, it happens), it needs this_cpu_off to point
to __per_cpu_load.  Initialize accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/smpcommon.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 84395fabc41..7e157810062 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -3,8 +3,13 @@
  */
 #include <linux/module.h>
 #include <asm/smp.h>
+#include <asm/sections.h>
 
+#ifdef CONFIG_X86_64
+DEFINE_PER_CPU(unsigned long, this_cpu_off) = (unsigned long)__per_cpu_load;
+#else
 DEFINE_PER_CPU(unsigned long, this_cpu_off);
+#endif
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
 #ifdef CONFIG_X86_32
-- 
cgit v1.2.3


From a7e2e735dcf98717150d3c8eaa731de8038af05a Mon Sep 17 00:00:00 2001
From: Ian Molton <ian@mnementh.co.uk>
Date: Thu, 8 Jan 2009 21:03:55 +0000
Subject: ASoC: machine driver for Toshiba e750

This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750
PDA. It includes support for powering up / down the external headphone and
speaker amplifiers on this machine.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/e750.c                      | 5 +++++
 arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 +++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8edb97..665066fd280 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index efbd2aa9ece..02b28e0ed73 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -45,6 +45,11 @@
 /* e7xx IrDA power control */
 #define GPIO_E7XX_IR_OFF         38
 
+/* e750 audio control GPIOs */
+#define GPIO_E750_HP_AMP_OFF      4
+#define GPIO_E750_SPK_AMP_OFF     7
+#define GPIO_E750_HP_DETECT      37
+
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
 #define GPIO_ESERIES_TMIO_PCLR      19
-- 
cgit v1.2.3


From 0465c7aa6fbab89de820442aed449ceb8d9145a6 Mon Sep 17 00:00:00 2001
From: Ian Molton <ian@mnementh.co.uk>
Date: Thu, 8 Jan 2009 21:16:05 +0000
Subject: ASoC: machine driver for Toshiba e800

This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800
PDA. It includes support for powering up / down the external headphone and
speaker amplifiers on this machine.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 02b28e0ed73..6d6e4d8fa4c 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -50,6 +50,11 @@
 #define GPIO_E750_SPK_AMP_OFF     7
 #define GPIO_E750_HP_DETECT      37
 
+/* e800 audio control GPIOs */
+#define GPIO_E800_HP_DETECT      81
+#define GPIO_E800_HP_AMP_OFF     82
+#define GPIO_E800_SPK_AMP_ON     83
+
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
 #define GPIO_ESERIES_TMIO_PCLR      19
-- 
cgit v1.2.3


From 6eb714c63ed5bd663627f7dda8c4d5258f3b64ef Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 16 Jan 2009 15:31:15 -0800
Subject: cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write

Impact: use new work_on_cpu function to reduce stack usage

Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().

Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.

Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now
that the work_on_cpu() function is more stable.

Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Dieter Ries <clip2@gmx.de>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <cpufreq@vger.kernel.org>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 019276717a7..4b1c319d30c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -150,8 +150,9 @@ struct drv_cmd {
 	u32 val;
 };
 
-static void do_drv_read(struct drv_cmd *cmd)
+static long do_drv_read(void *_cmd)
 {
+	struct drv_cmd *cmd = _cmd;
 	u32 h;
 
 	switch (cmd->type) {
@@ -166,10 +167,12 @@ static void do_drv_read(struct drv_cmd *cmd)
 	default:
 		break;
 	}
+	return 0;
 }
 
-static void do_drv_write(struct drv_cmd *cmd)
+static long do_drv_write(void *_cmd)
 {
+	struct drv_cmd *cmd = _cmd;
 	u32 lo, hi;
 
 	switch (cmd->type) {
@@ -186,30 +189,23 @@ static void do_drv_write(struct drv_cmd *cmd)
 	default:
 		break;
 	}
+	return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
-	cpumask_t saved_mask = current->cpus_allowed;
 	cmd->val = 0;
 
-	set_cpus_allowed_ptr(current, cmd->mask);
-	do_drv_read(cmd);
-	set_cpus_allowed_ptr(current, &saved_mask);
+	work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
-	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
 	for_each_cpu(i, cmd->mask) {
-		set_cpus_allowed_ptr(current, cpumask_of(i));
-		do_drv_write(cmd);
+		work_on_cpu(i, do_drv_write, cmd);
 	}
-
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return;
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -367,7 +363,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 	return freq;
 }
 
-static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq,
+static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
 				struct acpi_cpufreq_data *data)
 {
 	unsigned int cur_freq;
-- 
cgit v1.2.3


From cef30b3a84e1c7cbd49987d83c5863c001445842 Mon Sep 17 00:00:00 2001
From: Mike Travis <travis@sgi.com>
Date: Fri, 16 Jan 2009 15:58:13 -0800
Subject: x86: put trigger in to detect mismatched apic versions.

Fire off one message if two apic's discovered with different
apic versions.

Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/x86/kernel/apic.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 0f830e4f567..db0998641c5 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1833,6 +1833,11 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	num_processors++;
 	cpu = cpumask_next_zero(-1, cpu_present_mask);
 
+	if (version != apic_version[boot_cpu_physical_apicid])
+		WARN_ONCE(1,
+			"ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
+			apic_version[boot_cpu_physical_apicid], cpu, version);
+
 	physid_set(apicid, phys_cpu_present_map);
 	if (apicid == boot_cpu_physical_apicid) {
 		/*
-- 
cgit v1.2.3


From 74e7904559a10cbb9fbf9139c5c42fc87c0f62a4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 17 Jan 2009 15:26:32 +0900
Subject: linker script: add missing .data.percpu.page_aligned

arm, arm/mach-integrator and powerpc were missing
.data.percpu.page_aligned in their percpu output section definitions.
Add it.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/arm/kernel/vmlinux.lds.S     | 1 +
 arch/ia64/kernel/vmlinux.lds.S    | 1 +
 arch/powerpc/kernel/vmlinux.lds.S | 1 +
 3 files changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 00216071eaf..85598f7da40 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -65,6 +65,7 @@ SECTIONS
 #endif
 		. = ALIGN(4096);
 		__per_cpu_start = .;
+			*(.data.percpu.page_aligned)
 			*(.data.percpu)
 			*(.data.percpu.shared_aligned)
 		__per_cpu_end = .;
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 10a7d47e851..f45e4e508ec 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -219,6 +219,7 @@ SECTIONS
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
 		__per_cpu_start = .;
+		*(.data.percpu.page_aligned)
 		*(.data.percpu)
 		*(.data.percpu.shared_aligned)
 		__per_cpu_end = .;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 47bf15cd2c9..04e8ecea9b4 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -182,6 +182,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
 		__per_cpu_start = .;
+		*(.data.percpu.page_aligned)
 		*(.data.percpu)
 		*(.data.percpu.shared_aligned)
 		__per_cpu_end = .;
-- 
cgit v1.2.3


From 1b437c8c73a36daa471dd54a63c426d72af5723d Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:57 +0900
Subject: x86-64: Move irq stats from PDA to per-cpu and consolidate with
 32-bit.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/hardirq_64.h | 24 +++++++++++++++++++-----
 arch/x86/include/asm/pda.h        | 10 ----------
 arch/x86/kernel/irq.c             |  6 +-----
 arch/x86/kernel/irq_64.c          |  3 +++
 arch/x86/kernel/nmi.c             | 10 +---------
 arch/x86/xen/smp.c                | 18 +++---------------
 6 files changed, 27 insertions(+), 44 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
index b5a6b5d5670..a65bab20f6c 100644
--- a/arch/x86/include/asm/hardirq_64.h
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -3,22 +3,36 @@
 
 #include <linux/threads.h>
 #include <linux/irq.h>
-#include <asm/pda.h>
 #include <asm/apic.h>
 
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;	/* arch dependent */
+	unsigned int apic_timer_irqs;	/* arch dependent */
+	unsigned int irq0_irqs;
+	unsigned int irq_resched_count;
+	unsigned int irq_call_count;
+	unsigned int irq_tlb_count;
+	unsigned int irq_thermal_count;
+	unsigned int irq_spurious_count;
+	unsigned int irq_threshold_count;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+
 /* We can have at most NR_VECTORS irqs routed to a cpu at a time */
 #define MAX_HARDIRQS_PER_CPU NR_VECTORS
 
 #define __ARCH_IRQ_STAT 1
 
-#define inc_irq_stat(member)	add_pda(member, 1)
+#define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
 
-#define local_softirq_pending() read_pda(__softirq_pending)
+#define local_softirq_pending() percpu_read(irq_stat.__softirq_pending)
 
 #define __ARCH_SET_SOFTIRQ_PENDING 1
 
-#define set_softirq_pending(x) write_pda(__softirq_pending, (x))
-#define or_softirq_pending(x)  or_pda(__softirq_pending, (x))
+#define set_softirq_pending(x) percpu_write(irq_stat.__softirq_pending, (x))
+#define or_softirq_pending(x)  percpu_or(irq_stat.__softirq_pending, (x))
 
 extern void ack_bad_irq(unsigned int irq);
 
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 47f274fe695..69a40757e21 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -25,19 +25,9 @@ struct x8664_pda {
 	char *irqstackptr;
 	short nodenumber;		/* number of current node (32k max) */
 	short in_bootmem;		/* pda lives in bootmem */
-	unsigned int __softirq_pending;
-	unsigned int __nmi_count;	/* number of NMI on this CPUs */
 	short mmu_state;
 	short isidle;
 	struct mm_struct *active_mm;
-	unsigned apic_timer_irqs;
-	unsigned irq0_irqs;
-	unsigned irq_resched_count;
-	unsigned irq_call_count;
-	unsigned irq_tlb_count;
-	unsigned irq_thermal_count;
-	unsigned irq_threshold_count;
-	unsigned irq_spurious_count;
 } ____cacheline_aligned_in_smp;
 
 DECLARE_PER_CPU(struct x8664_pda, __pda);
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3973e2df7f8..8b30d0c2512 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -36,11 +36,7 @@ void ack_bad_irq(unsigned int irq)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-# define irq_stats(x)		(&per_cpu(irq_stat, x))
-#else
-# define irq_stats(x)		cpu_pda(x)
-#endif
+#define irq_stats(x)		(&per_cpu(irq_stat, x))
 /*
  * /proc/interrupts printing:
  */
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 0b21cb1ea11..1db05247b47 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -19,6 +19,9 @@
 #include <asm/io_apic.h>
 #include <asm/idle.h>
 
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
 /*
  * Probabilistic stack overflow check:
  *
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 7228979f1e7..23b6d9e6e4f 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -61,11 +61,7 @@ static int endflag __initdata;
 
 static inline unsigned int get_nmi_count(int cpu)
 {
-#ifdef CONFIG_X86_64
-	return cpu_pda(cpu)->__nmi_count;
-#else
-	return nmi_count(cpu);
-#endif
+	return per_cpu(irq_stat, cpu).__nmi_count;
 }
 
 static inline int mce_in_progress(void)
@@ -82,12 +78,8 @@ static inline int mce_in_progress(void)
  */
 static inline unsigned int get_timer_irqs(int cpu)
 {
-#ifdef CONFIG_X86_64
-	return read_pda(apic_timer_irqs) + read_pda(irq0_irqs);
-#else
 	return per_cpu(irq_stat, cpu).apic_timer_irqs +
 		per_cpu(irq_stat, cpu).irq0_irqs;
-#endif
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 3bfd6dd0b47..9ff3b0999cf 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -50,11 +50,7 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id);
  */
 static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id)
 {
-#ifdef CONFIG_X86_32
-	__get_cpu_var(irq_stat).irq_resched_count++;
-#else
-	add_pda(irq_resched_count, 1);
-#endif
+	inc_irq_stat(irq_resched_count);
 
 	return IRQ_HANDLED;
 }
@@ -435,11 +431,7 @@ static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
 {
 	irq_enter();
 	generic_smp_call_function_interrupt();
-#ifdef CONFIG_X86_32
-	__get_cpu_var(irq_stat).irq_call_count++;
-#else
-	add_pda(irq_call_count, 1);
-#endif
+	inc_irq_stat(irq_call_count);
 	irq_exit();
 
 	return IRQ_HANDLED;
@@ -449,11 +441,7 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
 {
 	irq_enter();
 	generic_smp_call_function_single_interrupt();
-#ifdef CONFIG_X86_32
-	__get_cpu_var(irq_stat).irq_call_count++;
-#else
-	add_pda(irq_call_count, 1);
-#endif
+	inc_irq_stat(irq_call_count);
 	irq_exit();
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From 9eb912d1aa6b8106e06a73ea6702ec3dab0d6a1a Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:57 +0900
Subject: x86-64: Move TLB state from PDA to per-cpu and consolidate with
 32-bit.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/mmu_context_64.h | 16 +++++++---------
 arch/x86/include/asm/pda.h            |  2 --
 arch/x86/include/asm/tlbflush.h       |  7 ++-----
 arch/x86/kernel/cpu/common.c          |  2 --
 arch/x86/kernel/tlb_32.c              | 12 ++----------
 arch/x86/kernel/tlb_64.c              | 13 ++++++++-----
 arch/x86/xen/mmu.c                    |  6 +-----
 7 files changed, 20 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mmu_context_64.h b/arch/x86/include/asm/mmu_context_64.h
index 677d36e9540..c4572505ab3 100644
--- a/arch/x86/include/asm/mmu_context_64.h
+++ b/arch/x86/include/asm/mmu_context_64.h
@@ -1,13 +1,11 @@
 #ifndef _ASM_X86_MMU_CONTEXT_64_H
 #define _ASM_X86_MMU_CONTEXT_64_H
 
-#include <asm/pda.h>
-
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
 #ifdef CONFIG_SMP
-	if (read_pda(mmu_state) == TLBSTATE_OK)
-		write_pda(mmu_state, TLBSTATE_LAZY);
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
+		percpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
 #endif
 }
 
@@ -19,8 +17,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		/* stop flush ipis for the previous mm */
 		cpu_clear(cpu, prev->cpu_vm_mask);
 #ifdef CONFIG_SMP
-		write_pda(mmu_state, TLBSTATE_OK);
-		write_pda(active_mm, next);
+		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		percpu_write(cpu_tlbstate.active_mm, next);
 #endif
 		cpu_set(cpu, next->cpu_vm_mask);
 		load_cr3(next->pgd);
@@ -30,9 +28,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	}
 #ifdef CONFIG_SMP
 	else {
-		write_pda(mmu_state, TLBSTATE_OK);
-		if (read_pda(active_mm) != next)
-			BUG();
+		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
+
 		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
 			/* We were in lazy tlb mode and leave_mm disabled
 			 * tlb flush IPI delivery. We must reload CR3
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 69a40757e21..8ee835ed10e 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -25,9 +25,7 @@ struct x8664_pda {
 	char *irqstackptr;
 	short nodenumber;		/* number of current node (32k max) */
 	short in_bootmem;		/* pda lives in bootmem */
-	short mmu_state;
 	short isidle;
-	struct mm_struct *active_mm;
 } ____cacheline_aligned_in_smp;
 
 DECLARE_PER_CPU(struct x8664_pda, __pda);
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 17feaa9c7e7..d3539f998f8 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -148,20 +148,17 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 #define TLBSTATE_OK	1
 #define TLBSTATE_LAZY	2
 
-#ifdef CONFIG_X86_32
 struct tlb_state {
 	struct mm_struct *active_mm;
 	int state;
-	char __cacheline_padding[L1_CACHE_BYTES-8];
 };
 DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
 
-void reset_lazy_tlbstate(void);
-#else
 static inline void reset_lazy_tlbstate(void)
 {
+	percpu_write(cpu_tlbstate.state, 0);
+	percpu_write(cpu_tlbstate.active_mm, &init_mm);
 }
-#endif
 
 #endif	/* SMP */
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c49498d4083..3d0cc6f1711 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -897,8 +897,6 @@ void __cpuinit pda_init(int cpu)
 	pda->irqcount = -1;
 	pda->kernelstack = (unsigned long)stack_thread_info() -
 				 PDA_STACKOFFSET + THREAD_SIZE;
-	pda->active_mm = &init_mm;
-	pda->mmu_state = 0;
 
 	if (cpu == 0) {
 		/* others are initialized in smpboot.c */
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index e65449d0f7d..abf0808d6fc 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -4,8 +4,8 @@
 
 #include <asm/tlbflush.h>
 
-DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate)
-			____cacheline_aligned = { &init_mm, 0, };
+DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
+			= { &init_mm, 0, };
 
 /* must come after the send_IPI functions above for inlining */
 #include <mach_ipi.h>
@@ -231,14 +231,6 @@ void flush_tlb_all(void)
 	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
 
-void reset_lazy_tlbstate(void)
-{
-	int cpu = raw_smp_processor_id();
-
-	per_cpu(cpu_tlbstate, cpu).state = 0;
-	per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
-}
-
 static int init_flush_cpumask(void)
 {
 	alloc_cpumask_var(&flush_cpumask, GFP_KERNEL);
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 7f4141d3b66..e64a32c4882 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -18,6 +18,9 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_bau.h>
 
+DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
+			= { &init_mm, 0, };
+
 #include <mach_ipi.h>
 /*
  *	Smarter SMP flushing macros.
@@ -62,9 +65,9 @@ static DEFINE_PER_CPU(union smp_flush_state, flush_state);
  */
 void leave_mm(int cpu)
 {
-	if (read_pda(mmu_state) == TLBSTATE_OK)
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
 		BUG();
-	cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask);
+	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
 	load_cr3(swapper_pg_dir);
 }
 EXPORT_SYMBOL_GPL(leave_mm);
@@ -142,8 +145,8 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 		 * BUG();
 		 */
 
-	if (f->flush_mm == read_pda(active_mm)) {
-		if (read_pda(mmu_state) == TLBSTATE_OK) {
+	if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
+		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
 			if (f->flush_va == TLB_FLUSH_ALL)
 				local_flush_tlb();
 			else
@@ -281,7 +284,7 @@ static void do_flush_tlb_all(void *info)
 	unsigned long cpu = smp_processor_id();
 
 	__flush_tlb_all();
-	if (read_pda(mmu_state) == TLBSTATE_LAZY)
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
 		leave_mm(cpu);
 }
 
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 7bc7852cc5c..98cb9869eb2 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1063,11 +1063,7 @@ static void drop_other_mm_ref(void *info)
 	struct mm_struct *mm = info;
 	struct mm_struct *active_mm;
 
-#ifdef CONFIG_X86_64
-	active_mm = read_pda(active_mm);
-#else
-	active_mm = __get_cpu_var(cpu_tlbstate).active_mm;
-#endif
+	active_mm = percpu_read(cpu_tlbstate.active_mm);
 
 	if (active_mm == mm)
 		leave_mm(smp_processor_id());
-- 
cgit v1.2.3


From 26f80bd6a9ab17bc8a60b6092e7c0d05c5927ce5 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Convert irqstacks to per-cpu

Move the irqstackptr variable from the PDA to per-cpu.  Make the
stacks themselves per-cpu, removing some specific allocation code.
Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot
adjustments.

tj: * sprinkle some underbars around.

    * irq_stack_ptr is not used till traps_init(), no reason to
      initialize it early.  On SMP, just leaving it NULL till proper
      initialization in setup_per_cpu_areas() works.  Dropped
      is_boot_cpu and early irq_stack_ptr initialization.

    * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack)
      instead of (char, irq_stack[IRQ_STACK_SIZE]).

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/page_64.h   |  4 ++--
 arch/x86/include/asm/pda.h       |  1 -
 arch/x86/include/asm/processor.h |  3 +++
 arch/x86/kernel/asm-offsets_64.c |  1 -
 arch/x86/kernel/cpu/common.c     | 19 +++++++------------
 arch/x86/kernel/dumpstack_64.c   | 33 +++++++++++++++++----------------
 arch/x86/kernel/entry_64.S       |  6 +++---
 arch/x86/kernel/setup_percpu.c   |  4 +++-
 8 files changed, 35 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page_64.h b/arch/x86/include/asm/page_64.h
index 5ebca29f44f..e27fdbe5f9e 100644
--- a/arch/x86/include/asm/page_64.h
+++ b/arch/x86/include/asm/page_64.h
@@ -13,8 +13,8 @@
 #define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
 #define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
 
-#define IRQSTACK_ORDER 2
-#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
+#define IRQ_STACK_ORDER 2
+#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
 
 #define STACKFAULT_STACK 1
 #define DOUBLEFAULT_STACK 2
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 8ee835ed10e..09965f7a216 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -22,7 +22,6 @@ struct x8664_pda {
 					/* gcc-ABI: this canary MUST be at
 					   offset 40!!! */
 #endif
-	char *irqstackptr;
 	short nodenumber;		/* number of current node (32k max) */
 	short in_bootmem;		/* pda lives in bootmem */
 	short isidle;
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 091cd8855f2..f511246fa6c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -378,6 +378,9 @@ union thread_xstate {
 
 #ifdef CONFIG_X86_64
 DECLARE_PER_CPU(struct orig_ist, orig_ist);
+
+DECLARE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack);
+DECLARE_PER_CPU(char *, irq_stack_ptr);
 #endif
 
 extern void print_cpu_info(struct cpuinfo_x86 *);
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index f4cc81bfbf8..5b821fbdaf7 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -54,7 +54,6 @@ int main(void)
 	ENTRY(pcurrent); 
 	ENTRY(irqcount);
 	ENTRY(cpunumber);
-	ENTRY(irqstackptr);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
 #undef ENTRY
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3d0cc6f1711..496f0a01919 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -881,7 +881,13 @@ __setup("clearcpuid=", setup_disablecpuid);
 #ifdef CONFIG_X86_64
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
-static char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
+DEFINE_PER_CPU_PAGE_ALIGNED(char[IRQ_STACK_SIZE], irq_stack);
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(char *, irq_stack_ptr);	/* will be set during per cpu init */
+#else
+DEFINE_PER_CPU(char *, irq_stack_ptr) =
+	per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64;
+#endif
 
 void __cpuinit pda_init(int cpu)
 {
@@ -901,18 +907,7 @@ void __cpuinit pda_init(int cpu)
 	if (cpu == 0) {
 		/* others are initialized in smpboot.c */
 		pda->pcurrent = &init_task;
-		pda->irqstackptr = boot_cpu_stack;
-		pda->irqstackptr += IRQSTACKSIZE - 64;
 	} else {
-		if (!pda->irqstackptr) {
-			pda->irqstackptr = (char *)
-				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-			if (!pda->irqstackptr)
-				panic("cannot allocate irqstack for cpu %d",
-				      cpu);
-			pda->irqstackptr += IRQSTACKSIZE - 64;
-		}
-
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index c302d070704..28e26a4315d 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -106,7 +106,8 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		const struct stacktrace_ops *ops, void *data)
 {
 	const unsigned cpu = get_cpu();
-	unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr;
+	unsigned long *irq_stack_end =
+		(unsigned long *)per_cpu(irq_stack_ptr, cpu);
 	unsigned used = 0;
 	struct thread_info *tinfo;
 	int graph = 0;
@@ -160,23 +161,23 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 			stack = (unsigned long *) estack_end[-2];
 			continue;
 		}
-		if (irqstack_end) {
-			unsigned long *irqstack;
-			irqstack = irqstack_end -
-				(IRQSTACKSIZE - 64) / sizeof(*irqstack);
+		if (irq_stack_end) {
+			unsigned long *irq_stack;
+			irq_stack = irq_stack_end -
+				(IRQ_STACK_SIZE - 64) / sizeof(*irq_stack);
 
-			if (stack >= irqstack && stack < irqstack_end) {
+			if (stack >= irq_stack && stack < irq_stack_end) {
 				if (ops->stack(data, "IRQ") < 0)
 					break;
 				bp = print_context_stack(tinfo, stack, bp,
-					ops, data, irqstack_end, &graph);
+					ops, data, irq_stack_end, &graph);
 				/*
 				 * We link to the next stack (which would be
 				 * the process stack normally) the last
 				 * pointer (index -1 to end) in the IRQ stack:
 				 */
-				stack = (unsigned long *) (irqstack_end[-1]);
-				irqstack_end = NULL;
+				stack = (unsigned long *) (irq_stack_end[-1]);
+				irq_stack_end = NULL;
 				ops->stack(data, "EOI");
 				continue;
 			}
@@ -199,10 +200,10 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 	unsigned long *stack;
 	int i;
 	const int cpu = smp_processor_id();
-	unsigned long *irqstack_end =
-		(unsigned long *) (cpu_pda(cpu)->irqstackptr);
-	unsigned long *irqstack =
-		(unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
+	unsigned long *irq_stack_end =
+		(unsigned long *)(per_cpu(irq_stack_ptr, cpu));
+	unsigned long *irq_stack =
+		(unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE);
 
 	/*
 	 * debugging aid: "show_stack(NULL, NULL);" prints the
@@ -218,9 +219,9 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 
 	stack = sp;
 	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack >= irqstack && stack <= irqstack_end) {
-			if (stack == irqstack_end) {
-				stack = (unsigned long *) (irqstack_end[-1]);
+		if (stack >= irq_stack && stack <= irq_stack_end) {
+			if (stack == irq_stack_end) {
+				stack = (unsigned long *) (irq_stack_end[-1]);
 				printk(" <EOI> ");
 			}
 		} else {
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 4833f3a1965..d22677a6643 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -345,7 +345,7 @@ ENTRY(save_args)
 1:	incl %gs:pda_irqcount
 	jne 2f
 	popq_cfi %rax			/* move return address... */
-	mov %gs:pda_irqstackptr,%rsp
+	mov PER_CPU_VAR(irq_stack_ptr),%rsp
 	EMPTY_FRAME 0
 	pushq_cfi %rax			/* ... to the new stack */
 	/*
@@ -1261,7 +1261,7 @@ ENTRY(call_softirq)
 	mov  %rsp,%rbp
 	CFI_DEF_CFA_REGISTER rbp
 	incl %gs:pda_irqcount
-	cmove %gs:pda_irqstackptr,%rsp
+	cmove PER_CPU_VAR(irq_stack_ptr),%rsp
 	push  %rbp			# backlink for old unwinder
 	call __do_softirq
 	leaveq
@@ -1300,7 +1300,7 @@ ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
 11:	incl %gs:pda_irqcount
 	movq %rsp,%rbp
 	CFI_DEF_CFA_REGISTER rbp
-	cmovzq %gs:pda_irqstackptr,%rsp
+	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
 	pushq %rbp			# backlink for old unwinder
 	call xen_evtchn_do_upcall
 	popq %rsp
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index b5c35af2011..8b53ef83c61 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -192,7 +192,10 @@ void __init setup_per_cpu_areas(void)
 
 		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
+		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 #ifdef CONFIG_X86_64
+		per_cpu(irq_stack_ptr, cpu) =
+			(char *)per_cpu(irq_stack, cpu) + IRQ_STACK_SIZE - 64;
 		/*
 		 * CPU0 modified pda in the init data area, reload pda
 		 * offset for CPU0 and clear the area for others.
@@ -202,7 +205,6 @@ void __init setup_per_cpu_areas(void)
 		else
 			memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu)));
 #endif
-		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
-- 
cgit v1.2.3


From 92d65b2371d86d40807e1dbfdccadc4d501edcde Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Convert exception stacks to per-cpu

Move the exception stacks to per-cpu, removing specific allocation code.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/cpu/common.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 496f0a01919..b6d7eec0be7 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -913,8 +913,9 @@ void __cpuinit pda_init(int cpu)
 	}
 }
 
-static char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-				  DEBUG_STKSZ] __page_aligned_bss;
+static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ])
+	__aligned(PAGE_SIZE);
 
 extern asmlinkage void ignore_sysret(void);
 
@@ -972,15 +973,12 @@ void __cpuinit cpu_init(void)
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
 	unsigned long v;
-	char *estacks = NULL;
 	struct task_struct *me;
 	int i;
 
 	/* CPU 0 is initialised in head64.c */
 	if (cpu != 0)
 		pda_init(cpu);
-	else
-		estacks = boot_exception_stacks;
 
 	me = current;
 
@@ -1014,18 +1012,13 @@ void __cpuinit cpu_init(void)
 	 * set up and load the per-CPU TSS
 	 */
 	if (!orig_ist->ist[0]) {
-		static const unsigned int order[N_EXCEPTION_STACKS] = {
-		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		static const unsigned int sizes[N_EXCEPTION_STACKS] = {
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
+		  [DEBUG_STACK - 1] = DEBUG_STKSZ
 		};
+		char *estacks = per_cpu(exception_stacks, cpu);
 		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
-			if (cpu) {
-				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-				if (!estacks)
-					panic("Cannot allocate exception "
-					      "stack %ld %d\n", v, cpu);
-			}
-			estacks += PAGE_SIZE << order[v];
+			estacks += sizes[v];
 			orig_ist->ist[v] = t->x86_tss.ist[v] =
 					(unsigned long)estacks;
 		}
-- 
cgit v1.2.3


From ea9279066de44053d0c20ea855bc9f4706652d84 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Move cpu number from PDA to per-cpu and consolidate with
 32-bit.

tj: moved cpu_number definition out of CONFIG_HAVE_SETUP_PER_CPU_AREA
    for voyager.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h       |  2 +-
 arch/x86/include/asm/smp.h       |  4 +---
 arch/x86/kernel/asm-offsets_64.c |  1 -
 arch/x86/kernel/cpu/common.c     |  1 -
 arch/x86/kernel/process_32.c     |  3 ---
 arch/x86/kernel/setup_percpu.c   | 10 ++++++++++
 arch/x86/kernel/smpcommon.c      |  2 --
 7 files changed, 12 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 09965f7a216..668d5a5b6f7 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -16,7 +16,7 @@ struct x8664_pda {
 	unsigned long kernelstack;	/* 16 top of kernel stack for current */
 	unsigned long oldrsp;		/* 24 user rsp for system call */
 	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
-	unsigned int cpunumber;		/* 36 Logical CPU number */
+	unsigned int unused6;		/* 36 was cpunumber */
 #ifdef CONFIG_CC_STACKPROTECTOR
 	unsigned long stack_canary;	/* 40 stack canary value */
 					/* gcc-ABI: this canary MUST be at
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index c7bbbbe65d3..68636e767a9 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -25,9 +25,7 @@ extern unsigned int num_processors;
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
 DECLARE_PER_CPU(cpumask_t, cpu_core_map);
 DECLARE_PER_CPU(u16, cpu_llc_id);
-#ifdef CONFIG_X86_32
 DECLARE_PER_CPU(int, cpu_number);
-#endif
 
 static inline struct cpumask *cpu_sibling_mask(int cpu)
 {
@@ -164,7 +162,7 @@ extern unsigned disabled_cpus __cpuinitdata;
 extern int safe_smp_processor_id(void);
 
 #elif defined(CONFIG_X86_64_SMP)
-#define raw_smp_processor_id()	read_pda(cpunumber)
+#define raw_smp_processor_id() (percpu_read(cpu_number))
 
 #define stack_smp_processor_id()					\
 ({								\
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 5b821fbdaf7..cae6697c099 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -53,7 +53,6 @@ int main(void)
 	ENTRY(oldrsp); 
 	ENTRY(pcurrent); 
 	ENTRY(irqcount);
-	ENTRY(cpunumber);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
 #undef ENTRY
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b6d7eec0be7..4221e920886 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -899,7 +899,6 @@ void __cpuinit pda_init(int cpu)
 
 	load_pda_offset(cpu);
 
-	pda->cpunumber = cpu;
 	pda->irqcount = -1;
 	pda->kernelstack = (unsigned long)stack_thread_info() -
 				 PDA_STACKOFFSET + THREAD_SIZE;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 77d546817d9..2c00a57ccb9 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -66,9 +66,6 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
 
-DEFINE_PER_CPU(int, cpu_number);
-EXPORT_PER_CPU_SYMBOL(cpu_number);
-
 /*
  * Return saved PC of a blocked thread.
  */
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 8b53ef83c61..258497f93f4 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -22,6 +22,15 @@
 # define DBG(x...)
 #endif
 
+/*
+ * Could be inside CONFIG_HAVE_SETUP_PER_CPU_AREA with other stuff but
+ * voyager wants cpu_number too.
+ */
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(int, cpu_number);
+EXPORT_PER_CPU_SYMBOL(cpu_number);
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 unsigned int num_processors;
 unsigned disabled_cpus __cpuinitdata;
@@ -193,6 +202,7 @@ void __init setup_per_cpu_areas(void)
 		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
+		per_cpu(cpu_number, cpu) = cpu;
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
 			(char *)per_cpu(irq_stack, cpu) + IRQ_STACK_SIZE - 64;
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 7e157810062..add36b4e37c 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -28,7 +28,5 @@ __cpuinit void init_gdt(int cpu)
 
 	write_gdt_entry(get_cpu_gdt_table(cpu),
 			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
-
-	per_cpu(cpu_number, cpu) = cpu;
 }
 #endif
-- 
cgit v1.2.3


From c6f5e0acd5d12ee23f701f15889872e67b47caa6 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Move current task from PDA to per-cpu and consolidate with
 32-bit.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/current.h   | 24 +++---------------------
 arch/x86/include/asm/pda.h       |  4 ++--
 arch/x86/include/asm/system.h    |  4 ++--
 arch/x86/kernel/asm-offsets_64.c |  1 -
 arch/x86/kernel/cpu/common.c     |  5 +----
 arch/x86/kernel/dumpstack_64.c   |  2 +-
 arch/x86/kernel/process_64.c     |  5 ++++-
 arch/x86/kernel/smpboot.c        |  3 +--
 arch/x86/xen/smp.c               |  3 +--
 9 files changed, 15 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
index 0728480f5c5..c68c361697e 100644
--- a/arch/x86/include/asm/current.h
+++ b/arch/x86/include/asm/current.h
@@ -1,39 +1,21 @@
 #ifndef _ASM_X86_CURRENT_H
 #define _ASM_X86_CURRENT_H
 
-#ifdef CONFIG_X86_32
 #include <linux/compiler.h>
 #include <asm/percpu.h>
 
+#ifndef __ASSEMBLY__
 struct task_struct;
 
 DECLARE_PER_CPU(struct task_struct *, current_task);
-static __always_inline struct task_struct *get_current(void)
-{
-	return percpu_read(current_task);
-}
-
-#else /* X86_32 */
-
-#ifndef __ASSEMBLY__
-#include <asm/pda.h>
-
-struct task_struct;
 
 static __always_inline struct task_struct *get_current(void)
 {
-	return read_pda(pcurrent);
+	return percpu_read(current_task);
 }
 
-#else /* __ASSEMBLY__ */
-
-#include <asm/asm-offsets.h>
-#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
+#define current get_current()
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* X86_32 */
-
-#define current get_current()
-
 #endif /* _ASM_X86_CURRENT_H */
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 668d5a5b6f7..7209302d922 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -11,8 +11,8 @@
 
 /* Per processor datastructure. %gs points to it while the kernel runs */
 struct x8664_pda {
-	struct task_struct *pcurrent;	/* 0  Current process */
-	unsigned long dummy;
+	unsigned long unused1;
+	unsigned long unused2;
 	unsigned long kernelstack;	/* 16 top of kernel stack for current */
 	unsigned long oldrsp;		/* 24 user rsp for system call */
 	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 8e626ea33a1..4399aac680e 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -94,7 +94,7 @@ do {									\
 	     "call __switch_to\n\t"					  \
 	     ".globl thread_return\n"					  \
 	     "thread_return:\n\t"					  \
-	     "movq %%gs:%P[pda_pcurrent],%%rsi\n\t"			  \
+	     "movq "__percpu_seg_str"%P[current_task],%%rsi\n\t"	  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
 	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
 	     "movq %%rax,%%rdi\n\t" 					  \
@@ -106,7 +106,7 @@ do {									\
 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
 	       [tif_fork] "i" (TIF_FORK),			  	  \
 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
-	       [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent))  \
+	       [current_task] "m" (per_cpu_var(current_task))		  \
 	     : "memory", "cc" __EXTRA_CLOBBER)
 #endif
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index cae6697c099..4f7a210e1e5 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -51,7 +51,6 @@ int main(void)
 #define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
 	ENTRY(kernelstack); 
 	ENTRY(oldrsp); 
-	ENTRY(pcurrent); 
 	ENTRY(irqcount);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4221e920886..b50e38d1688 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -903,10 +903,7 @@ void __cpuinit pda_init(int cpu)
 	pda->kernelstack = (unsigned long)stack_thread_info() -
 				 PDA_STACKOFFSET + THREAD_SIZE;
 
-	if (cpu == 0) {
-		/* others are initialized in smpboot.c */
-		pda->pcurrent = &init_task;
-	} else {
+	if (cpu != 0) {
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 28e26a4315d..d35db5993fd 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -242,7 +242,7 @@ void show_registers(struct pt_regs *regs)
 	int i;
 	unsigned long sp;
 	const int cpu = smp_processor_id();
-	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
+	struct task_struct *cur = current;
 
 	sp = regs->sp;
 	printk("CPU %d ", cpu);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 416fb9282f4..e00c31a4b3c 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -57,6 +57,9 @@
 
 asmlinkage extern void ret_from_fork(void);
 
+DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
+
 unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED;
 
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
@@ -615,7 +618,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	prev->usersp = read_pda(oldrsp);
 	write_pda(oldrsp, next->usersp);
-	write_pda(pcurrent, next_p);
+	percpu_write(current_task, next_p);
 
 	write_pda(kernelstack,
 		  (unsigned long)task_stack_page(next_p) +
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2f0e0f1090f..5854be0fb80 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -790,13 +790,12 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 
 	set_idle_for_cpu(cpu, c_idle.idle);
 do_rest:
-#ifdef CONFIG_X86_32
 	per_cpu(current_task, cpu) = c_idle.idle;
+#ifdef CONFIG_X86_32
 	init_gdt(cpu);
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	irq_ctx_init(cpu);
 #else
-	cpu_pda(cpu)->pcurrent = c_idle.idle;
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
 	initial_gs = per_cpu_offset(cpu);
 #endif
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 9ff3b0999cf..72c2eb9b64c 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -279,12 +279,11 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 	struct task_struct *idle = idle_task(cpu);
 	int rc;
 
+	per_cpu(current_task, cpu) = idle;
 #ifdef CONFIG_X86_32
 	init_gdt(cpu);
-	per_cpu(current_task, cpu) = idle;
 	irq_ctx_init(cpu);
 #else
-	cpu_pda(cpu)->pcurrent = idle;
 	clear_tsk_thread_flag(idle, TIF_FORK);
 #endif
 	xen_setup_timer(cpu);
-- 
cgit v1.2.3


From 9af45651f1f7c89942e016a1a00a7ebddfa727f8 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Move kernelstack from PDA to per-cpu.

Also clean up PER_CPU_VAR usage in xen-asm_64.S

tj: * remove now unused stack_thread_info()
    * s/kernelstack/kernel_stack/
    * added FIXME comment in xen-asm_64.S

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/ia32/ia32entry.S          |  8 ++++----
 arch/x86/include/asm/pda.h         |  4 +---
 arch/x86/include/asm/thread_info.h | 20 ++++++++------------
 arch/x86/kernel/asm-offsets_64.c   |  1 -
 arch/x86/kernel/cpu/common.c       |  6 ++++--
 arch/x86/kernel/entry_64.S         |  4 ++--
 arch/x86/kernel/process_64.c       |  4 ++--
 arch/x86/kernel/smpboot.c          |  3 +++
 arch/x86/xen/xen-asm_64.S          | 23 +++++++++++------------
 9 files changed, 35 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 256b00b6189..9c79b247700 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -112,8 +112,8 @@ ENTRY(ia32_sysenter_target)
 	CFI_DEF_CFA	rsp,0
 	CFI_REGISTER	rsp,rbp
 	SWAPGS_UNSAFE_STACK
-	movq	%gs:pda_kernelstack, %rsp
-	addq	$(PDA_STACKOFFSET),%rsp	
+	movq	PER_CPU_VAR(kernel_stack), %rsp
+	addq	$(KERNEL_STACK_OFFSET),%rsp
 	/*
 	 * No need to follow this irqs on/off section: the syscall
 	 * disabled irqs, here we enable it straight after entry:
@@ -273,13 +273,13 @@ ENDPROC(ia32_sysenter_target)
 ENTRY(ia32_cstar_target)
 	CFI_STARTPROC32	simple
 	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,PDA_STACKOFFSET
+	CFI_DEF_CFA	rsp,KERNEL_STACK_OFFSET
 	CFI_REGISTER	rip,rcx
 	/*CFI_REGISTER	rflags,r11*/
 	SWAPGS_UNSAFE_STACK
 	movl	%esp,%r8d
 	CFI_REGISTER	rsp,r8
-	movq	%gs:pda_kernelstack,%rsp
+	movq	PER_CPU_VAR(kernel_stack),%rsp
 	/*
 	 * No need to follow this irqs on/off section: the syscall
 	 * disabled irqs and here we enable it straight after entry:
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 7209302d922..4d28ffba6e1 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -13,7 +13,7 @@
 struct x8664_pda {
 	unsigned long unused1;
 	unsigned long unused2;
-	unsigned long kernelstack;	/* 16 top of kernel stack for current */
+	unsigned long unused3;
 	unsigned long oldrsp;		/* 24 user rsp for system call */
 	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
 	unsigned int unused6;		/* 36 was cpunumber */
@@ -44,6 +44,4 @@ extern void pda_init(int);
 
 #endif
 
-#define PDA_STACKOFFSET (5*8)
-
 #endif /* _ASM_X86_PDA_H */
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 98789647baa..b46f8ca007b 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -194,25 +194,21 @@ static inline struct thread_info *current_thread_info(void)
 
 #else /* X86_32 */
 
-#include <asm/pda.h>
+#include <asm/percpu.h>
+#define KERNEL_STACK_OFFSET (5*8)
 
 /*
  * macros/functions for gaining access to the thread information structure
  * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
-	return ti;
-}
+DECLARE_PER_CPU(unsigned long, kernel_stack);
 
-/* do not use in interrupt context */
-static inline struct thread_info *stack_thread_info(void)
+static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
-	asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+	ti = (void *)(percpu_read(kernel_stack) +
+		      KERNEL_STACK_OFFSET - THREAD_SIZE);
 	return ti;
 }
 
@@ -220,8 +216,8 @@ static inline struct thread_info *stack_thread_info(void)
 
 /* how to get the thread information struct from ASM */
 #define GET_THREAD_INFO(reg) \
-	movq %gs:pda_kernelstack,reg ; \
-	subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
+	movq PER_CPU_VAR(kernel_stack),reg ; \
+	subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg
 
 #endif
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 4f7a210e1e5..cafff5f4a03 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -49,7 +49,6 @@ int main(void)
 	BLANK();
 #undef ENTRY
 #define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
-	ENTRY(kernelstack); 
 	ENTRY(oldrsp); 
 	ENTRY(irqcount);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b50e38d1688..06b6290088f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -889,6 +889,10 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
 	per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64;
 #endif
 
+DEFINE_PER_CPU(unsigned long, kernel_stack) =
+	(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
+EXPORT_PER_CPU_SYMBOL(kernel_stack);
+
 void __cpuinit pda_init(int cpu)
 {
 	struct x8664_pda *pda = cpu_pda(cpu);
@@ -900,8 +904,6 @@ void __cpuinit pda_init(int cpu)
 	load_pda_offset(cpu);
 
 	pda->irqcount = -1;
-	pda->kernelstack = (unsigned long)stack_thread_info() -
-				 PDA_STACKOFFSET + THREAD_SIZE;
 
 	if (cpu != 0) {
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index d22677a6643..0dd45859a7a 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -468,7 +468,7 @@ END(ret_from_fork)
 ENTRY(system_call)
 	CFI_STARTPROC	simple
 	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,PDA_STACKOFFSET
+	CFI_DEF_CFA	rsp,KERNEL_STACK_OFFSET
 	CFI_REGISTER	rip,rcx
 	/*CFI_REGISTER	rflags,r11*/
 	SWAPGS_UNSAFE_STACK
@@ -480,7 +480,7 @@ ENTRY(system_call)
 ENTRY(system_call_after_swapgs)
 
 	movq	%rsp,%gs:pda_oldrsp
-	movq	%gs:pda_kernelstack,%rsp
+	movq	PER_CPU_VAR(kernel_stack),%rsp
 	/*
 	 * No need to follow this irqs off/on section - it's straight
 	 * and short:
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e00c31a4b3c..6c5f5760210 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -620,9 +620,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	write_pda(oldrsp, next->usersp);
 	percpu_write(current_task, next_p);
 
-	write_pda(kernelstack,
+	percpu_write(kernel_stack,
 		  (unsigned long)task_stack_page(next_p) +
-		  THREAD_SIZE - PDA_STACKOFFSET);
+		  THREAD_SIZE - KERNEL_STACK_OFFSET);
 #ifdef CONFIG_CC_STACKPROTECTOR
 	write_pda(stack_canary, next_p->stack_canary);
 	/*
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 5854be0fb80..869b98840fd 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -798,6 +798,9 @@ do_rest:
 #else
 	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
 	initial_gs = per_cpu_offset(cpu);
+	per_cpu(kernel_stack, cpu) =
+		(unsigned long)task_stack_page(c_idle.idle) -
+		KERNEL_STACK_OFFSET + THREAD_SIZE;
 #endif
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	initial_code = (unsigned long)start_secondary;
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 05794c566e8..5a23e899367 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -17,6 +17,7 @@
 #include <asm/processor-flags.h>
 #include <asm/errno.h>
 #include <asm/segment.h>
+#include <asm/percpu.h>
 
 #include <xen/interface/xen.h>
 
@@ -28,12 +29,10 @@
 
 #if 1
 /*
-	x86-64 does not yet support direct access to percpu variables
-	via a segment override, so we just need to make sure this code
-	never gets used
+	FIXME: x86_64 now can support direct access to percpu variables
+	via a segment override.  Update xen accordingly.
  */
 #define BUG			ud2a
-#define PER_CPU_VAR(var, off)	0xdeadbeef
 #endif
 
 /*
@@ -45,14 +44,14 @@ ENTRY(xen_irq_enable_direct)
 	BUG
 
 	/* Unmask events */
-	movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
 
 	/* Test for pending */
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
 	jz 1f
 
 2:	call check_events
@@ -69,7 +68,7 @@ ENDPATCH(xen_irq_enable_direct)
 ENTRY(xen_irq_disable_direct)
 	BUG
 
-	movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 ENDPATCH(xen_irq_disable_direct)
 	ret
 	ENDPROC(xen_irq_disable_direct)
@@ -87,7 +86,7 @@ ENDPATCH(xen_irq_disable_direct)
 ENTRY(xen_save_fl_direct)
 	BUG
 
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	setz %ah
 	addb %ah,%ah
 ENDPATCH(xen_save_fl_direct)
@@ -107,13 +106,13 @@ ENTRY(xen_restore_fl_direct)
 	BUG
 
 	testb $X86_EFLAGS_IF>>8, %ah
-	setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
 
 	/* check for unmasked and pending */
-	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
 	jz 1f
 2:	call check_events
 1:
@@ -196,7 +195,7 @@ ENTRY(xen_sysret64)
 	/* We're already on the usermode stack at this point, but still
 	   with the kernel gs, so we can easily switch back */
 	movq %rsp, %gs:pda_oldrsp
-	movq %gs:pda_kernelstack,%rsp
+	movq PER_CPU_VAR(kernel_stack),%rsp
 
 	pushq $__USER_DS
 	pushq %gs:pda_oldrsp
@@ -213,7 +212,7 @@ ENTRY(xen_sysret32)
 	/* We're already on the usermode stack at this point, but still
 	   with the kernel gs, so we can easily switch back */
 	movq %rsp, %gs:pda_oldrsp
-	movq %gs:pda_kernelstack, %rsp
+	movq PER_CPU_VAR(kernel_stack), %rsp
 
 	pushq $__USER32_DS
 	pushq %gs:pda_oldrsp
-- 
cgit v1.2.3


From 3d1e42a7cf945e289d6ba26159aa0e2b0645401b Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Move oldrsp from PDA to per-cpu.

tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda
      is still referenced in the file
    * s/oldrsp/old_rsp/

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h       |  2 +-
 arch/x86/kernel/asm-offsets_64.c |  1 -
 arch/x86/kernel/entry_64.S       | 10 +++++-----
 arch/x86/kernel/process_64.c     |  8 +++++---
 arch/x86/xen/xen-asm_64.S        |  8 ++++----
 5 files changed, 15 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 4d28ffba6e1..ae23deb9955 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -14,7 +14,7 @@ struct x8664_pda {
 	unsigned long unused1;
 	unsigned long unused2;
 	unsigned long unused3;
-	unsigned long oldrsp;		/* 24 user rsp for system call */
+	unsigned long unused4;
 	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
 	unsigned int unused6;		/* 36 was cpunumber */
 #ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index cafff5f4a03..afda6deb851 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -49,7 +49,6 @@ int main(void)
 	BLANK();
 #undef ENTRY
 #define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
-	ENTRY(oldrsp); 
 	ENTRY(irqcount);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0dd45859a7a..7c27da407da 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -210,7 +210,7 @@ ENTRY(native_usergs_sysret64)
 
 	/* %rsp:at FRAMEEND */
 	.macro FIXUP_TOP_OF_STACK tmp offset=0
-	movq %gs:pda_oldrsp,\tmp
+	movq PER_CPU_VAR(old_rsp),\tmp
 	movq \tmp,RSP+\offset(%rsp)
 	movq $__USER_DS,SS+\offset(%rsp)
 	movq $__USER_CS,CS+\offset(%rsp)
@@ -221,7 +221,7 @@ ENTRY(native_usergs_sysret64)
 
 	.macro RESTORE_TOP_OF_STACK tmp offset=0
 	movq RSP+\offset(%rsp),\tmp
-	movq \tmp,%gs:pda_oldrsp
+	movq \tmp,PER_CPU_VAR(old_rsp)
 	movq EFLAGS+\offset(%rsp),\tmp
 	movq \tmp,R11+\offset(%rsp)
 	.endm
@@ -479,7 +479,7 @@ ENTRY(system_call)
 	 */
 ENTRY(system_call_after_swapgs)
 
-	movq	%rsp,%gs:pda_oldrsp
+	movq	%rsp,PER_CPU_VAR(old_rsp)
 	movq	PER_CPU_VAR(kernel_stack),%rsp
 	/*
 	 * No need to follow this irqs off/on section - it's straight
@@ -523,7 +523,7 @@ sysret_check:
 	CFI_REGISTER	rip,rcx
 	RESTORE_ARGS 0,-ARG_SKIP,1
 	/*CFI_REGISTER	rflags,r11*/
-	movq	%gs:pda_oldrsp, %rsp
+	movq	PER_CPU_VAR(old_rsp), %rsp
 	USERGS_SYSRET64
 
 	CFI_RESTORE_STATE
@@ -833,7 +833,7 @@ common_interrupt:
 	XCPT_FRAME
 	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
 	interrupt do_IRQ
-	/* 0(%rsp): oldrsp-ARGOFFSET */
+	/* 0(%rsp): old_rsp-ARGOFFSET */
 ret_from_intr:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 6c5f5760210..48012891892 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -60,6 +60,8 @@ asmlinkage extern void ret_from_fork(void);
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
 
+DEFINE_PER_CPU(unsigned long, old_rsp);
+
 unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED;
 
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
@@ -395,7 +397,7 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 	load_gs_index(0);
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
-	write_pda(oldrsp, new_sp);
+	percpu_write(old_rsp, new_sp);
 	regs->cs		= __USER_CS;
 	regs->ss		= __USER_DS;
 	regs->flags		= 0x200;
@@ -616,8 +618,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
-	prev->usersp = read_pda(oldrsp);
-	write_pda(oldrsp, next->usersp);
+	prev->usersp = percpu_read(old_rsp);
+	percpu_write(old_rsp, next->usersp);
 	percpu_write(current_task, next_p);
 
 	percpu_write(kernel_stack,
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 5a23e899367..d6fc51f4ce8 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -194,11 +194,11 @@ RELOC(xen_sysexit, 1b+1)
 ENTRY(xen_sysret64)
 	/* We're already on the usermode stack at this point, but still
 	   with the kernel gs, so we can easily switch back */
-	movq %rsp, %gs:pda_oldrsp
+	movq %rsp, PER_CPU_VAR(old_rsp)
 	movq PER_CPU_VAR(kernel_stack),%rsp
 
 	pushq $__USER_DS
-	pushq %gs:pda_oldrsp
+	pushq PER_CPU_VAR(old_rsp)
 	pushq %r11
 	pushq $__USER_CS
 	pushq %rcx
@@ -211,11 +211,11 @@ RELOC(xen_sysret64, 1b+1)
 ENTRY(xen_sysret32)
 	/* We're already on the usermode stack at this point, but still
 	   with the kernel gs, so we can easily switch back */
-	movq %rsp, %gs:pda_oldrsp
+	movq %rsp, PER_CPU_VAR(old_rsp)
 	movq PER_CPU_VAR(kernel_stack), %rsp
 
 	pushq $__USER32_DS
-	pushq %gs:pda_oldrsp
+	pushq PER_CPU_VAR(old_rsp)
 	pushq %r11
 	pushq $__USER32_CS
 	pushq %rcx
-- 
cgit v1.2.3


From 5689553076c4a67b83426b076082c63085b7567a Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:58 +0900
Subject: x86-64: Move irqcount from PDA to per-cpu.

tj: s/irqcount/irq_count/

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h       |  2 +-
 arch/x86/kernel/asm-offsets_64.c |  1 -
 arch/x86/kernel/cpu/common.c     |  4 ++--
 arch/x86/kernel/entry_64.S       | 14 +++++++-------
 4 files changed, 10 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index ae23deb9955..4527d70314d 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -15,7 +15,7 @@ struct x8664_pda {
 	unsigned long unused2;
 	unsigned long unused3;
 	unsigned long unused4;
-	int irqcount;			/* 32 Irq nesting counter. Starts -1 */
+	int unused5;
 	unsigned int unused6;		/* 36 was cpunumber */
 #ifdef CONFIG_CC_STACKPROTECTOR
 	unsigned long stack_canary;	/* 40 stack canary value */
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index afda6deb851..64c834a39aa 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -49,7 +49,6 @@ int main(void)
 	BLANK();
 #undef ENTRY
 #define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
-	ENTRY(irqcount);
 	DEFINE(pda_size, sizeof(struct x8664_pda));
 	BLANK();
 #undef ENTRY
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 06b6290088f..e2323ecce1d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -893,6 +893,8 @@ DEFINE_PER_CPU(unsigned long, kernel_stack) =
 	(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
 EXPORT_PER_CPU_SYMBOL(kernel_stack);
 
+DEFINE_PER_CPU(unsigned int, irq_count) = -1;
+
 void __cpuinit pda_init(int cpu)
 {
 	struct x8664_pda *pda = cpu_pda(cpu);
@@ -903,8 +905,6 @@ void __cpuinit pda_init(int cpu)
 
 	load_pda_offset(cpu);
 
-	pda->irqcount = -1;
-
 	if (cpu != 0) {
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 7c27da407da..c52b6091916 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -337,12 +337,12 @@ ENTRY(save_args)
 	je 1f
 	SWAPGS
 	/*
-	 * irqcount is used to check if a CPU is already on an interrupt stack
+	 * irq_count is used to check if a CPU is already on an interrupt stack
 	 * or not. While this is essentially redundant with preempt_count it is
 	 * a little cheaper to use a separate counter in the PDA (short of
 	 * moving irq_enter into assembly, which would be too much work)
 	 */
-1:	incl %gs:pda_irqcount
+1:	incl PER_CPU_VAR(irq_count)
 	jne 2f
 	popq_cfi %rax			/* move return address... */
 	mov PER_CPU_VAR(irq_stack_ptr),%rsp
@@ -837,7 +837,7 @@ common_interrupt:
 ret_from_intr:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	decl %gs:pda_irqcount
+	decl PER_CPU_VAR(irq_count)
 	leaveq
 	CFI_DEF_CFA_REGISTER	rsp
 	CFI_ADJUST_CFA_OFFSET	-8
@@ -1260,14 +1260,14 @@ ENTRY(call_softirq)
 	CFI_REL_OFFSET rbp,0
 	mov  %rsp,%rbp
 	CFI_DEF_CFA_REGISTER rbp
-	incl %gs:pda_irqcount
+	incl PER_CPU_VAR(irq_count)
 	cmove PER_CPU_VAR(irq_stack_ptr),%rsp
 	push  %rbp			# backlink for old unwinder
 	call __do_softirq
 	leaveq
 	CFI_DEF_CFA_REGISTER	rsp
 	CFI_ADJUST_CFA_OFFSET   -8
-	decl %gs:pda_irqcount
+	decl PER_CPU_VAR(irq_count)
 	ret
 	CFI_ENDPROC
 END(call_softirq)
@@ -1297,7 +1297,7 @@ ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
 	movq %rdi, %rsp            # we don't return, adjust the stack frame
 	CFI_ENDPROC
 	DEFAULT_FRAME
-11:	incl %gs:pda_irqcount
+11:	incl PER_CPU_VAR(irq_count)
 	movq %rsp,%rbp
 	CFI_DEF_CFA_REGISTER rbp
 	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
@@ -1305,7 +1305,7 @@ ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
 	call xen_evtchn_do_upcall
 	popq %rsp
 	CFI_DEF_CFA_REGISTER rsp
-	decl %gs:pda_irqcount
+	decl PER_CPU_VAR(irq_count)
 	jmp  error_exit
 	CFI_ENDPROC
 END(do_hypervisor_callback)
-- 
cgit v1.2.3


From e7a22c1ebcc1caa8178df1819d05128bb5b45ab9 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:59 +0900
Subject: x86-64: Move nodenumber from PDA to per-cpu.

tj: * s/nodenumber/node_number/
    * removed now unused pda variable from pda_init()

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h      |  1 -
 arch/x86/include/asm/topology.h |  3 ++-
 arch/x86/kernel/cpu/common.c    | 13 ++++++-------
 arch/x86/kernel/setup_percpu.c  |  4 +++-
 4 files changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 4527d70314d..b30ef6bddc4 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -22,7 +22,6 @@ struct x8664_pda {
 					/* gcc-ABI: this canary MUST be at
 					   offset 40!!! */
 #endif
-	short nodenumber;		/* number of current node (32k max) */
 	short in_bootmem;		/* pda lives in bootmem */
 	short isidle;
 } ____cacheline_aligned_in_smp;
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 87ca3fd86e8..ffea1fe03a9 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -83,7 +83,8 @@ extern cpumask_t *node_to_cpumask_map;
 DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
 
 /* Returns the number of the current Node. */
-#define numa_node_id()		read_pda(nodenumber)
+DECLARE_PER_CPU(int, node_number);
+#define numa_node_id()		percpu_read(node_number)
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
 extern int cpu_to_node(int cpu);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index e2323ecce1d..7976a6a0f65 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -897,18 +897,11 @@ DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
 void __cpuinit pda_init(int cpu)
 {
-	struct x8664_pda *pda = cpu_pda(cpu);
-
 	/* Setup up data that may be needed in __get_free_pages early */
 	loadsegment(fs, 0);
 	loadsegment(gs, 0);
 
 	load_pda_offset(cpu);
-
-	if (cpu != 0) {
-		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
-			pda->nodenumber = cpu_to_node(cpu);
-	}
 }
 
 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
@@ -978,6 +971,12 @@ void __cpuinit cpu_init(void)
 	if (cpu != 0)
 		pda_init(cpu);
 
+#ifdef CONFIG_NUMA
+	if (cpu != 0 && percpu_read(node_number) == 0 &&
+	    cpu_to_node(cpu) != NUMA_NO_NODE)
+		percpu_write(node_number, cpu_to_node(cpu));
+#endif
+
 	me = current;
 
 	if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask))
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 258497f93f4..efbafbbff58 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -53,6 +53,8 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
 
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 #define	X86_64_NUMA	1	/* (used later) */
+DEFINE_PER_CPU(int, node_number) = 0;
+EXPORT_PER_CPU_SYMBOL(node_number);
 
 /*
  * Map cpu index to node index
@@ -283,7 +285,7 @@ void __cpuinit numa_set_node(int cpu, int node)
 	per_cpu(x86_cpu_to_node_map, cpu) = node;
 
 	if (node != NUMA_NO_NODE)
-		cpu_pda(cpu)->nodenumber = node;
+		per_cpu(node_number, cpu) = node;
 }
 
 void __cpuinit numa_clear_node(int cpu)
-- 
cgit v1.2.3


From c2558e0eba66b49993e619da66c95a50a97830a3 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:59 +0900
Subject: x86-64: Move isidle from PDA to per-cpu.

tj: s/isidle/is_idle/

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h   | 1 -
 arch/x86/kernel/process_64.c | 5 +++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index b30ef6bddc4..c31ca048a90 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -23,7 +23,6 @@ struct x8664_pda {
 					   offset 40!!! */
 #endif
 	short in_bootmem;		/* pda lives in bootmem */
-	short isidle;
 } ____cacheline_aligned_in_smp;
 
 DECLARE_PER_CPU(struct x8664_pda, __pda);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 48012891892..4523ff88a69 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -61,6 +61,7 @@ DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
 
 DEFINE_PER_CPU(unsigned long, old_rsp);
+static DEFINE_PER_CPU(unsigned char, is_idle);
 
 unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED;
 
@@ -80,13 +81,13 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister);
 
 void enter_idle(void)
 {
-	write_pda(isidle, 1);
+	percpu_write(is_idle, 1);
 	atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL);
 }
 
 static void __exit_idle(void)
 {
-	if (test_and_clear_bit_pda(0, isidle) == 0)
+	if (x86_test_and_clear_bit_percpu(0, is_idle) == 0)
 		return;
 	atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL);
 }
-- 
cgit v1.2.3


From 87b264065880fa696c121dad8498a60524e0f6de Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 00:38:59 +0900
Subject: x86-64: Use absolute displacements for per-cpu accesses.

Accessing memory through %gs should not use rip-relative addressing.
Adding a P prefix for the argument tells gcc to not add (%rip) to
the memory references.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/percpu.h | 26 +++++++++++++-------------
 arch/x86/include/asm/system.h |  2 +-
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 03aa4b00a1c..165d5272ece 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -39,10 +39,10 @@
 #include <linux/stringify.h>
 
 #ifdef CONFIG_SMP
-#define __percpu_seg_str	"%%"__stringify(__percpu_seg)":"
+#define __percpu_arg(x)		"%%"__stringify(__percpu_seg)":%P" #x
 #define __my_cpu_offset		percpu_read(this_cpu_off)
 #else
-#define __percpu_seg_str
+#define __percpu_arg(x)		"%" #x
 #endif
 
 /* For arch-specific code, we can use direct single-insn ops (they
@@ -58,22 +58,22 @@ do {							\
 	}						\
 	switch (sizeof(var)) {				\
 	case 1:						\
-		asm(op "b %1,"__percpu_seg_str"%0"	\
+		asm(op "b %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
 		    : "ri" ((T__)val));			\
 		break;					\
 	case 2:						\
-		asm(op "w %1,"__percpu_seg_str"%0"	\
+		asm(op "w %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
 		    : "ri" ((T__)val));			\
 		break;					\
 	case 4:						\
-		asm(op "l %1,"__percpu_seg_str"%0"	\
+		asm(op "l %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
 		    : "ri" ((T__)val));			\
 		break;					\
 	case 8:						\
-		asm(op "q %1,"__percpu_seg_str"%0"	\
+		asm(op "q %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
 		    : "r" ((T__)val));			\
 		break;					\
@@ -86,22 +86,22 @@ do {							\
 	typeof(var) ret__;				\
 	switch (sizeof(var)) {				\
 	case 1:						\
-		asm(op "b "__percpu_seg_str"%1,%0"	\
+		asm(op "b "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 2:						\
-		asm(op "w "__percpu_seg_str"%1,%0"	\
+		asm(op "w "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 4:						\
-		asm(op "l "__percpu_seg_str"%1,%0"	\
+		asm(op "l "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 8:						\
-		asm(op "q "__percpu_seg_str"%1,%0"	\
+		asm(op "q "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
 		    : "m" (var));			\
 		break;					\
@@ -122,9 +122,9 @@ do {							\
 #define x86_test_and_clear_bit_percpu(bit, var)				\
 ({									\
 	int old__;							\
-	asm volatile("btr %1,"__percpu_seg_str"%c2\n\tsbbl %0,%0"	\
-		     : "=r" (old__)					\
-		     : "dIr" (bit), "i" (&per_cpu__##var) : "memory");	\
+	asm volatile("btr %2,"__percpu_arg(1)"\n\tsbbl %0,%0"		\
+		     : "=r" (old__), "+m" (per_cpu__##var)		\
+		     : "dIr" (bit));					\
 	old__;								\
 })
 
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 4399aac680e..d1dc27dba36 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -94,7 +94,7 @@ do {									\
 	     "call __switch_to\n\t"					  \
 	     ".globl thread_return\n"					  \
 	     "thread_return:\n\t"					  \
-	     "movq "__percpu_seg_str"%P[current_task],%%rsi\n\t"	  \
+	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
 	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
 	     "movq %%rax,%%rdi\n\t" 					  \
-- 
cgit v1.2.3


From 5662a2f8e7313f78d6b17ab383f3e4f04971c335 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 18 Jan 2009 19:37:21 +0100
Subject: x86, rdc321x: remove/move leftover files

Impact: cleanup

Move/remove leftover RDC321 files. Now that it's not a subarch anymore,
arch/x86/mach-rdc321x and arch/x86/include/asm/mach-rdc321x/ are not
needed.

One include file was still in use: rdc321x_defs.h, move that to the
generic x86 asm header directory.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-rdc321x/gpio.h         |  60 -------
 arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h |  12 --
 arch/x86/include/asm/rdc321x_defs.h              |  12 ++
 arch/x86/mach-rdc321x/Makefile                   |   5 -
 arch/x86/mach-rdc321x/gpio.c                     | 194 -----------------------
 arch/x86/mach-rdc321x/platform.c                 |  69 --------
 6 files changed, 12 insertions(+), 340 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-rdc321x/gpio.h
 delete mode 100644 arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
 create mode 100644 arch/x86/include/asm/rdc321x_defs.h
 delete mode 100644 arch/x86/mach-rdc321x/Makefile
 delete mode 100644 arch/x86/mach-rdc321x/gpio.c
 delete mode 100644 arch/x86/mach-rdc321x/platform.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-rdc321x/gpio.h b/arch/x86/include/asm/mach-rdc321x/gpio.h
deleted file mode 100644
index c210ab5788b..00000000000
--- a/arch/x86/include/asm/mach-rdc321x/gpio.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _ASM_X86_MACH_RDC321X_GPIO_H
-#define _ASM_X86_MACH_RDC321X_GPIO_H
-
-#include <linux/kernel.h>
-
-extern int rdc_gpio_get_value(unsigned gpio);
-extern void rdc_gpio_set_value(unsigned gpio, int value);
-extern int rdc_gpio_direction_input(unsigned gpio);
-extern int rdc_gpio_direction_output(unsigned gpio, int value);
-extern int rdc_gpio_request(unsigned gpio, const char *label);
-extern void rdc_gpio_free(unsigned gpio);
-extern void __init rdc321x_gpio_setup(void);
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return rdc_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-	rdc_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return rdc_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return rdc_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return rdc_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	rdc_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
-
-#endif /* _ASM_X86_MACH_RDC321X_GPIO_H */
diff --git a/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h b/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
deleted file mode 100644
index c8e9c8bed3d..00000000000
--- a/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#define PFX	"rdc321x: "
-
-/* General purpose configuration and data registers */
-#define RDC3210_CFGREG_ADDR     0x0CF8
-#define RDC3210_CFGREG_DATA     0x0CFC
-
-#define RDC321X_GPIO_CTRL_REG1	0x48
-#define RDC321X_GPIO_CTRL_REG2	0x84
-#define RDC321X_GPIO_DATA_REG1	0x4c
-#define RDC321X_GPIO_DATA_REG2	0x88
-
-#define RDC321X_MAX_GPIO	58
diff --git a/arch/x86/include/asm/rdc321x_defs.h b/arch/x86/include/asm/rdc321x_defs.h
new file mode 100644
index 00000000000..c8e9c8bed3d
--- /dev/null
+++ b/arch/x86/include/asm/rdc321x_defs.h
@@ -0,0 +1,12 @@
+#define PFX	"rdc321x: "
+
+/* General purpose configuration and data registers */
+#define RDC3210_CFGREG_ADDR     0x0CF8
+#define RDC3210_CFGREG_DATA     0x0CFC
+
+#define RDC321X_GPIO_CTRL_REG1	0x48
+#define RDC321X_GPIO_CTRL_REG2	0x84
+#define RDC321X_GPIO_DATA_REG1	0x4c
+#define RDC321X_GPIO_DATA_REG2	0x88
+
+#define RDC321X_MAX_GPIO	58
diff --git a/arch/x86/mach-rdc321x/Makefile b/arch/x86/mach-rdc321x/Makefile
deleted file mode 100644
index 8325b4ca431..00000000000
--- a/arch/x86/mach-rdc321x/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the RDC321x specific parts of the kernel
-#
-obj-$(CONFIG_X86_RDC321X)        := gpio.o platform.o
-
diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c
deleted file mode 100644
index 247f33d3a40..00000000000
--- a/arch/x86/mach-rdc321x/gpio.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- *  GPIO support for RDC SoC R3210/R8610
- *
- *  Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
- *  Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/module.h>
-
-#include <asm/gpio.h>
-#include <asm/mach-rdc321x/rdc321x_defs.h>
-
-
-/* spin lock to protect our private copy of GPIO data register plus
-   the access to PCI conf registers. */
-static DEFINE_SPINLOCK(gpio_lock);
-
-/* copy of GPIO data registers */
-static u32 gpio_data_reg1;
-static u32 gpio_data_reg2;
-
-static u32 gpio_request_data[2];
-
-
-static inline void rdc321x_conf_write(unsigned addr, u32 value)
-{
-	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
-	outl(value, RDC3210_CFGREG_DATA);
-}
-
-static inline void rdc321x_conf_or(unsigned addr, u32 value)
-{
-	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
-	value |= inl(RDC3210_CFGREG_DATA);
-	outl(value, RDC3210_CFGREG_DATA);
-}
-
-static inline u32 rdc321x_conf_read(unsigned addr)
-{
-	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
-
-	return inl(RDC3210_CFGREG_DATA);
-}
-
-/* configure pin as GPIO */
-static void rdc321x_configure_gpio(unsigned gpio)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-	rdc321x_conf_or(gpio < 32
-		? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
-		1 << (gpio & 0x1f));
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
-/* initially setup the 2 copies of the gpio data registers.
-   This function must be called by the platform setup code. */
-void __init rdc321x_gpio_setup()
-{
-	/* this might not be, what others (BIOS, bootloader, etc.)
-	   wrote to these registers before, but it's a good guess. Still
-	   better than just using 0xffffffff. */
-
-	gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
-	gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
-}
-
-/* determine, if gpio number is valid */
-static inline int rdc321x_is_gpio(unsigned gpio)
-{
-	return gpio <= RDC321X_MAX_GPIO;
-}
-
-/* request GPIO */
-int rdc_gpio_request(unsigned gpio, const char *label)
-{
-	unsigned long flags;
-
-	if (!rdc321x_is_gpio(gpio))
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-	if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f)))
-		goto inuse;
-	gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f));
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return 0;
-inuse:
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return -EINVAL;
-}
-EXPORT_SYMBOL(rdc_gpio_request);
-
-/* release previously-claimed GPIO */
-void rdc_gpio_free(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (!rdc321x_is_gpio(gpio))
-		return;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-	gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f));
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(rdc_gpio_free);
-
-/* read GPIO pin */
-int rdc_gpio_get_value(unsigned gpio)
-{
-	u32 reg;
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-	reg = rdc321x_conf_read(gpio < 32
-		? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
-}
-EXPORT_SYMBOL(rdc_gpio_get_value);
-
-/* set GPIO pin to value */
-void rdc_gpio_set_value(unsigned gpio, int value)
-{
-	unsigned long flags;
-	u32 reg;
-
-	reg = 1 << (gpio & 0x1f);
-	if (gpio < 32) {
-		spin_lock_irqsave(&gpio_lock, flags);
-		if (value)
-			gpio_data_reg1 |= reg;
-		else
-			gpio_data_reg1 &= ~reg;
-		rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
-		spin_unlock_irqrestore(&gpio_lock, flags);
-	} else {
-		spin_lock_irqsave(&gpio_lock, flags);
-		if (value)
-			gpio_data_reg2 |= reg;
-		else
-			gpio_data_reg2 &= ~reg;
-		rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
-		spin_unlock_irqrestore(&gpio_lock, flags);
-	}
-}
-EXPORT_SYMBOL(rdc_gpio_set_value);
-
-/* configure GPIO pin as input */
-int rdc_gpio_direction_input(unsigned gpio)
-{
-	if (!rdc321x_is_gpio(gpio))
-		return -EINVAL;
-
-	rdc321x_configure_gpio(gpio);
-
-	return 0;
-}
-EXPORT_SYMBOL(rdc_gpio_direction_input);
-
-/* configure GPIO pin as output and set value */
-int rdc_gpio_direction_output(unsigned gpio, int value)
-{
-	if (!rdc321x_is_gpio(gpio))
-		return -EINVAL;
-
-	gpio_set_value(gpio, value);
-	rdc321x_configure_gpio(gpio);
-
-	return 0;
-}
-EXPORT_SYMBOL(rdc_gpio_direction_output);
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
deleted file mode 100644
index 4f4e50c3ad3..00000000000
--- a/arch/x86/mach-rdc321x/platform.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  Generic RDC321x platform devices
- *
- *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-
-#include <asm/gpio.h>
-
-/* LEDS */
-static struct gpio_led default_leds[] = {
-	{ .name = "rdc:dmz", .gpio = 1, },
-};
-
-static struct gpio_led_platform_data rdc321x_led_data = {
-	.num_leds = ARRAY_SIZE(default_leds),
-	.leds = default_leds,
-};
-
-static struct platform_device rdc321x_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &rdc321x_led_data,
-	}
-};
-
-/* Watchdog */
-static struct platform_device rdc321x_wdt = {
-	.name = "rdc321x-wdt",
-	.id = -1,
-	.num_resources = 0,
-};
-
-static struct platform_device *rdc321x_devs[] = {
-	&rdc321x_leds,
-	&rdc321x_wdt
-};
-
-static int __init rdc_board_setup(void)
-{
-	rdc321x_gpio_setup();
-
-	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
-}
-
-arch_initcall(rdc_board_setup);
-- 
cgit v1.2.3


From 422e79a8b39d9ac73e410dc3cd099aecea82afd2 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Mon, 19 Jan 2009 17:06:42 +1100
Subject: x86: Remove never-called arch_setup_msi_irq()

Since commit 75c46fa, "x64, x2apic/intr-remap: MSI and MSI-X
support for interrupt remapping infrastructure", x86 has had an
implementation of arch_setup_msi_irqs().

That implementation does not call arch_setup_msi_irq(), instead it calls
setup_irq(). No other x86 code calls arch_setup_msi_irq().

That leaves only arch_setup_msi_irqs() in drivers/pci/msi.c, but that
routine is overridden by the x86 version of arch_setup_msi_irqs().

So arch_setup_msi_irq() is dead code, remove it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/io_apic.c | 34 ----------------------------------
 1 file changed, 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 79b8c0c72d3..157aafa4558 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3462,40 +3462,6 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc)
-{
-	unsigned int irq;
-	int ret;
-	unsigned int irq_want;
-
-	irq_want = nr_irqs_gsi;
-	irq = create_irq_nr(irq_want);
-	if (irq == 0)
-		return -1;
-
-#ifdef CONFIG_INTR_REMAP
-	if (!intr_remapping_enabled)
-		goto no_ir;
-
-	ret = msi_alloc_irte(dev, irq, 1);
-	if (ret < 0)
-		goto error;
-no_ir:
-#endif
-	ret = setup_msi_irq(dev, msidesc, irq);
-	if (ret < 0) {
-		destroy_irq(irq);
-		return ret;
-	}
-	return 0;
-
-#ifdef CONFIG_INTR_REMAP
-error:
-	destroy_irq(irq);
-	return ret;
-#endif
-}
-
 int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	unsigned int irq;
-- 
cgit v1.2.3


From 28796eaf806502b9bd86cbacf8edbc14c80c14b0 Mon Sep 17 00:00:00 2001
From: Ian Molton <ian@mnementh.co.uk>
Date: Sat, 17 Jan 2009 15:11:06 +0000
Subject: ASoC: machine support for Toshiba e740 PDA

This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740.

Note:
The e740 has a hard headphone switch that turns the speaker off and is not
software detectable or controlable. Also both headphone and speaker amps
share a common output enable.

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/e740.c                      | 5 +++++
 arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 +++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00f4f0..a6fff782e7a 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 6d6e4d8fa4c..f3e5509820d 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -45,6 +45,11 @@
 /* e7xx IrDA power control */
 #define GPIO_E7XX_IR_OFF         38
 
+/* e740 audio control GPIOs */
+#define GPIO_E740_WM9705_nAVDD2  16
+#define GPIO_E740_MIC_ON         40
+#define GPIO_E740_AMP_ON         41
+
 /* e750 audio control GPIOs */
 #define GPIO_E750_HP_AMP_OFF      4
 #define GPIO_E750_SPK_AMP_OFF     7
-- 
cgit v1.2.3


From 5cdc5e9e69d4dc3a3630ae1fa666401b2a8dcde6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 19 Jan 2009 20:49:37 +0100
Subject: x86: fully honor "nolapic", fix

Impact: build fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 48578795583..9ca12af6c87 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1131,7 +1131,9 @@ void __cpuinit setup_local_APIC(void)
 	int i, j;
 
 	if (disable_apic) {
+#ifdef CONFIG_X86_IO_APIC
 		disable_ioapic_setup();
+#endif
 		return;
 	}
 
-- 
cgit v1.2.3


From c6e50f93db5bd0895ec7c7d1b6f3886c6e1f11b6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 20 Jan 2009 12:29:19 +0900
Subject: x86: cleanup stack protector

Impact: cleanup

Make the following cleanups.

* remove duplicate comment from boot_init_stack_canary() which fits
  better in the other place - cpu_idle().

* move stack_canary offset check from __switch_to() to
  boot_init_stack_canary().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h            |  2 --
 arch/x86/include/asm/stackprotector.h | 13 ++++++-------
 arch/x86/kernel/process_64.c          |  7 -------
 3 files changed, 6 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 5976cd803e9..4a8c9d382c9 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -40,6 +40,4 @@ extern void pda_init(int);
 
 #endif
 
-#define refresh_stack_canary() write_pda(stack_canary, current->stack_canary)
-
 #endif /* _ASM_X86_PDA_H */
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index c7f0d10bae7..2383e5bb475 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -16,13 +16,12 @@ static __always_inline void boot_init_stack_canary(void)
 	u64 tsc;
 
 	/*
-	 * If we're the non-boot CPU, nothing set the PDA stack
-	 * canary up for us - and if we are the boot CPU we have
-	 * a 0 stack canary. This is a good place for updating
-	 * it, as we wont ever return from this function (so the
-	 * invalid canaries already on the stack wont ever
-	 * trigger).
-	 *
+	 * Build time only check to make sure the stack_canary is at
+	 * offset 40 in the pda; this is a gcc ABI requirement
+	 */
+	BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40);
+
+	/*
 	 * We both use the random pool and the current TSC as a source
 	 * of randomness. The TSC only matters for very early init,
 	 * there it already has some randomness on most systems. Later
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index aa89eabf09e..088bc9a0f82 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -638,13 +638,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	percpu_write(kernel_stack,
 		  (unsigned long)task_stack_page(next_p) +
 		  THREAD_SIZE - KERNEL_STACK_OFFSET);
-#ifdef CONFIG_CC_STACKPROTECTOR
-	/*
-	 * Build time only check to make sure the stack_canary is at
-	 * offset 40 in the pda; this is a gcc ABI requirement
-	 */
-	BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40);
-#endif
 
 	/*
 	 * Now maybe reload the debug registers and handle I/O bitmaps
-- 
cgit v1.2.3


From b4a8f7a262e79ecb0b39beb1449af524a78887f8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 20 Jan 2009 12:29:19 +0900
Subject: x86: conditionalize stack canary handling in hot path

Impact: no unnecessary stack canary swapping during context switch

There's no point in moving stack_canary around during context switch
if it's not enabled.  Conditionalize it.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/system.h | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 8cadfe9b119..b77bd8bd3cc 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -86,17 +86,28 @@ do {									\
 	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
 	  "r12", "r13", "r14", "r15"
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __switch_canary							  \
+	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
+	"movq %%r8,%%gs:%P[pda_canary]\n\t"
+#define __switch_canary_param						  \
+	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))  \
+	, [pda_canary] "i" (offsetof(struct x8664_pda, stack_canary))
+#else	/* CC_STACKPROTECTOR */
+#define __switch_canary
+#define __switch_canary_param
+#endif	/* CC_STACKPROTECTOR */
+
 /* Save restore flags to clear handle leaking NT */
 #define switch_to(prev, next, last) \
-	asm volatile(SAVE_CONTEXT						    \
+	asm volatile(SAVE_CONTEXT					  \
 	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
 	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
 	     "call __switch_to\n\t"					  \
 	     ".globl thread_return\n"					  \
 	     "thread_return:\n\t"					  \
 	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
-	     "movq %P[task_canary](%%rsi),%%r8\n\t"			  \
-	     "movq %%r8,%%gs:%P[pda_canary]\n\t"			  \
+	     __switch_canary						  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
 	     LOCK_PREFIX "btr  %[tif_fork],%P[ti_flags](%%r8)\n\t"	  \
 	     "movq %%rax,%%rdi\n\t" 					  \
@@ -108,9 +119,8 @@ do {									\
 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
 	       [tif_fork] "i" (TIF_FORK),			  	  \
 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
-	       [task_canary] "i" (offsetof(struct task_struct, stack_canary)),\
-	       [current_task] "m" (per_cpu_var(current_task)),		  \
-	       [pda_canary] "i" (offsetof(struct x8664_pda, stack_canary))\
+	       [current_task] "m" (per_cpu_var(current_task))		  \
+	       __switch_canary_param					  \
 	     : "memory", "cc" __EXTRA_CLOBBER)
 #endif
 
-- 
cgit v1.2.3


From 8ce031972b40da58c268caba8c5ea3c0856d7131 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 12:21:27 +0900
Subject: x86: remove pda_init()

Impact: cleanup

Copy the code to cpu_init() to satisfy the requirement that the cpu
be reinitialized.  Remove all other calls, since the segments are
already initialized in head_64.S.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h   |  1 -
 arch/x86/kernel/cpu/common.c | 15 +++------------
 arch/x86/kernel/head64.c     |  2 --
 arch/x86/xen/enlighten.c     |  1 -
 4 files changed, 3 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 4a8c9d382c9..b473e952439 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -24,7 +24,6 @@ struct x8664_pda {
 } ____cacheline_aligned_in_smp;
 
 DECLARE_PER_CPU(struct x8664_pda, __pda);
-extern void pda_init(int);
 
 #define cpu_pda(cpu)		(&per_cpu(__pda, cpu))
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7976a6a0f65..f83a4d6160f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -895,15 +895,6 @@ EXPORT_PER_CPU_SYMBOL(kernel_stack);
 
 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
-void __cpuinit pda_init(int cpu)
-{
-	/* Setup up data that may be needed in __get_free_pages early */
-	loadsegment(fs, 0);
-	loadsegment(gs, 0);
-
-	load_pda_offset(cpu);
-}
-
 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ])
 	__aligned(PAGE_SIZE);
@@ -967,9 +958,9 @@ void __cpuinit cpu_init(void)
 	struct task_struct *me;
 	int i;
 
-	/* CPU 0 is initialised in head64.c */
-	if (cpu != 0)
-		pda_init(cpu);
+	loadsegment(fs, 0);
+	loadsegment(gs, 0);
+	load_pda_offset(cpu);
 
 #ifdef CONFIG_NUMA
 	if (cpu != 0 && percpu_read(node_number) == 0 &&
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index af67d3227ea..f5b27224769 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -91,8 +91,6 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	if (console_loglevel == 10)
 		early_printk("Kernel alive\n");
 
-	pda_init(0);
-
 	x86_64_start_reservations(real_mode_data);
 }
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 75b94139e1f..bef941f6145 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1645,7 +1645,6 @@ asmlinkage void __init xen_start_kernel(void)
 #ifdef CONFIG_X86_64
 	/* Disable until direct per-cpu data access. */
 	have_vcpu_info_placement = 0;
-	pda_init(0);
 #endif
 
 	xen_smp_init();
-- 
cgit v1.2.3


From 8c7e58e690ae60ab4215b025f433ed4af261e103 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 12:21:28 +0900
Subject: x86: rework __per_cpu_load adjustments

Impact: cleanup

Use cpu_number to determine if the adjustment is necessary.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/head_64.S | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index c8ace880661..98ea26a2fca 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -207,19 +207,15 @@ ENTRY(secondary_startup_64)
 
 #ifdef CONFIG_SMP
 	/*
-	 * early_gdt_base should point to the gdt_page in static percpu init
-	 * data area.  Computing this requires two symbols - __per_cpu_load
-	 * and per_cpu__gdt_page.  As linker can't do no such relocation, do
-	 * it by hand.  As early_gdt_descr is manipulated by C code for
-	 * secondary CPUs, this should be done only once for the boot CPU
-	 * when early_gdt_descr_base contains zero.
+	 * Fix up static pointers that need __per_cpu_load added.  The assembler
+	 * is unable to do this directly.  This is only needed for the boot cpu.
+	 * These values are set up with the correct base addresses by C code for
+	 * secondary cpus.
 	 */
-	movq	early_gdt_descr_base(%rip), %rax
-	testq	%rax, %rax
-	jnz	1f
-	movq	$__per_cpu_load, %rax
-	addq	$per_cpu__gdt_page, %rax
-	movq	%rax, early_gdt_descr_base(%rip)
+	movq	initial_gs(%rip), %rax
+	cmpl	$0, per_cpu__cpu_number(%rax)
+	jne	1f
+	addq	%rax, early_gdt_descr_base(%rip)
 1:
 #endif
 	/*
@@ -431,12 +427,8 @@ NEXT_PAGE(level2_spare_pgt)
 	.globl early_gdt_descr
 early_gdt_descr:
 	.word	GDT_ENTRIES*8-1
-#ifdef CONFIG_SMP
 early_gdt_descr_base:
-	.quad   0x0000000000000000
-#else
 	.quad	per_cpu__gdt_page
-#endif
 
 ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
-- 
cgit v1.2.3


From 947e76cdc34c782fc947313d4331380686eebbad Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Mon, 19 Jan 2009 12:21:28 +0900
Subject: x86: move stack_canary into irq_stack

Impact: x86_64 percpu area layout change, irq_stack now at the beginning

Now that the PDA is empty except for the stack canary, it can be removed.
The irqstack is moved to the start of the per-cpu section.  If the stack
protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack.

tj: * updated subject
    * dropped asm relocation of irq_stack_ptr
    * updated comments a bit
    * rebased on top of stack canary changes

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pda.h            |  3 ---
 arch/x86/include/asm/percpu.h         |  6 ------
 arch/x86/include/asm/processor.h      | 23 ++++++++++++++++++++++-
 arch/x86/include/asm/stackprotector.h |  6 +++---
 arch/x86/include/asm/system.h         |  4 ++--
 arch/x86/kernel/asm-offsets_64.c      |  4 ----
 arch/x86/kernel/cpu/common.c          |  7 ++++---
 arch/x86/kernel/head_64.S             | 13 +++++--------
 arch/x86/kernel/setup_percpu.c        | 34 ++++------------------------------
 arch/x86/kernel/vmlinux_64.lds.S      |  8 ++++++--
 10 files changed, 46 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index b473e952439..ba46416634f 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -17,9 +17,6 @@ struct x8664_pda {
 	unsigned long unused4;
 	int unused5;
 	unsigned int unused6;		/* 36 was cpunumber */
-	unsigned long stack_canary;	/* 40 stack canary value */
-					/* gcc-ABI: this canary MUST be at
-					   offset 40!!! */
 	short in_bootmem;		/* pda lives in bootmem */
 } ____cacheline_aligned_in_smp;
 
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 165d5272ece..ce980db5e59 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -133,12 +133,6 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
-#ifdef CONFIG_X86_64
-extern void load_pda_offset(int cpu);
-#else
-static inline void load_pda_offset(int cpu) { }
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index f511246fa6c..48676b943b9 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -379,8 +379,29 @@ union thread_xstate {
 #ifdef CONFIG_X86_64
 DECLARE_PER_CPU(struct orig_ist, orig_ist);
 
-DECLARE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack);
+union irq_stack_union {
+	char irq_stack[IRQ_STACK_SIZE];
+	/*
+	 * GCC hardcodes the stack canary as %gs:40.  Since the
+	 * irq_stack is the object at %gs:0, we reserve the bottom
+	 * 48 bytes of the irq stack for the canary.
+	 */
+	struct {
+		char gs_base[40];
+		unsigned long stack_canary;
+	};
+};
+
+DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
 DECLARE_PER_CPU(char *, irq_stack_ptr);
+
+static inline void load_gs_base(int cpu)
+{
+	/* Memory clobbers used to order pda/percpu accesses */
+	mb();
+	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
+	mb();
+}
 #endif
 
 extern void print_cpu_info(struct cpuinfo_x86 *);
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 2383e5bb475..36a700acaf2 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -2,7 +2,7 @@
 #define _ASM_STACKPROTECTOR_H 1
 
 #include <asm/tsc.h>
-#include <asm/pda.h>
+#include <asm/processor.h>
 
 /*
  * Initialize the stackprotector canary value.
@@ -19,7 +19,7 @@ static __always_inline void boot_init_stack_canary(void)
 	 * Build time only check to make sure the stack_canary is at
 	 * offset 40 in the pda; this is a gcc ABI requirement
 	 */
-	BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40);
+	BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
 
 	/*
 	 * We both use the random pool and the current TSC as a source
@@ -32,7 +32,7 @@ static __always_inline void boot_init_stack_canary(void)
 	canary += tsc + (tsc << 32UL);
 
 	current->stack_canary = canary;
-	write_pda(stack_canary, canary);
+	percpu_write(irq_stack_union.stack_canary, canary);
 }
 
 #endif
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index b77bd8bd3cc..52eb748a68a 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -89,10 +89,10 @@ do {									\
 #ifdef CONFIG_CC_STACKPROTECTOR
 #define __switch_canary							  \
 	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
-	"movq %%r8,%%gs:%P[pda_canary]\n\t"
+	"movq %%r8,%%gs:%P[gs_canary]\n\t"
 #define __switch_canary_param						  \
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))  \
-	, [pda_canary] "i" (offsetof(struct x8664_pda, stack_canary))
+	, [gs_canary] "i" (offsetof(union irq_stack_union, stack_canary))
 #else	/* CC_STACKPROTECTOR */
 #define __switch_canary
 #define __switch_canary_param
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 64c834a39aa..94f9c8b39d2 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -48,10 +48,6 @@ int main(void)
 #endif
 	BLANK();
 #undef ENTRY
-#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
-	DEFINE(pda_size, sizeof(struct x8664_pda));
-	BLANK();
-#undef ENTRY
 #ifdef CONFIG_PARAVIRT
 	BLANK();
 	OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f83a4d6160f..098934e72a1 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -881,12 +881,13 @@ __setup("clearcpuid=", setup_disablecpuid);
 #ifdef CONFIG_X86_64
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
-DEFINE_PER_CPU_PAGE_ALIGNED(char[IRQ_STACK_SIZE], irq_stack);
+DEFINE_PER_CPU_FIRST(union irq_stack_union,
+		     irq_stack_union) __aligned(PAGE_SIZE);
 #ifdef CONFIG_SMP
 DEFINE_PER_CPU(char *, irq_stack_ptr);	/* will be set during per cpu init */
 #else
 DEFINE_PER_CPU(char *, irq_stack_ptr) =
-	per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64;
+	per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
 #endif
 
 DEFINE_PER_CPU(unsigned long, kernel_stack) =
@@ -960,7 +961,7 @@ void __cpuinit cpu_init(void)
 
 	loadsegment(fs, 0);
 	loadsegment(gs, 0);
-	load_pda_offset(cpu);
+	load_gs_base(cpu);
 
 #ifdef CONFIG_NUMA
 	if (cpu != 0 && percpu_read(node_number) == 0 &&
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 98ea26a2fca..a0a2b5ca9b7 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -242,13 +242,10 @@ ENTRY(secondary_startup_64)
 
 	/* Set up %gs.
 	 *
-	 * On SMP, %gs should point to the per-cpu area.  For initial
-	 * boot, make %gs point to the init data section.  For a
-	 * secondary CPU,initial_gs should be set to its pda address
-	 * before the CPU runs this code.
-	 *
-	 * On UP, initial_gs points to PER_CPU_VAR(__pda) and doesn't
-	 * change.
+	 * The base of %gs always points to the bottom of the irqstack
+	 * union.  If the stack protector canary is enabled, it is
+	 * located at %gs:40.  Note that, on SMP, the boot cpu uses
+	 * init data section till per cpu areas are set up.
 	 */
 	movl	$MSR_GS_BASE,%ecx
 	movq	initial_gs(%rip),%rax
@@ -281,7 +278,7 @@ ENTRY(secondary_startup_64)
 #ifdef CONFIG_SMP
 	.quad	__per_cpu_load
 #else
-	.quad	PER_CPU_VAR(__pda)
+	.quad	PER_CPU_VAR(irq_stack_union)
 #endif
 	__FINITDATA
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index efbafbbff58..90b8e154bb5 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -77,30 +77,6 @@ static void __init setup_node_to_cpumask_map(void);
 static inline void setup_node_to_cpumask_map(void) { }
 #endif
 
-/*
- * Define load_pda_offset() and per-cpu __pda for x86_64.
- * load_pda_offset() is responsible for loading the offset of pda into
- * %gs.
- *
- * On SMP, pda offset also duals as percpu base address and thus it
- * should be at the start of per-cpu area.  To achieve this, it's
- * preallocated in vmlinux_64.lds.S directly instead of using
- * DEFINE_PER_CPU().
- */
-#ifdef CONFIG_X86_64
-void __cpuinit load_pda_offset(int cpu)
-{
-	/* Memory clobbers used to order pda/percpu accesses */
-	mb();
-	wrmsrl(MSR_GS_BASE, cpu_pda(cpu));
-	mb();
-}
-#ifndef CONFIG_SMP
-DEFINE_PER_CPU(struct x8664_pda, __pda);
-#endif
-EXPORT_PER_CPU_SYMBOL(__pda);
-#endif /* CONFIG_SMP && CONFIG_X86_64 */
-
 #ifdef CONFIG_X86_64
 
 /* correctly size the local cpu masks */
@@ -207,15 +183,13 @@ void __init setup_per_cpu_areas(void)
 		per_cpu(cpu_number, cpu) = cpu;
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
-			(char *)per_cpu(irq_stack, cpu) + IRQ_STACK_SIZE - 64;
+			per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64;
 		/*
-		 * CPU0 modified pda in the init data area, reload pda
-		 * offset for CPU0 and clear the area for others.
+		 * Up to this point, CPU0 has been using .data.init
+		 * area.  Reload %gs offset for CPU0.
 		 */
 		if (cpu == 0)
-			load_pda_offset(0);
-		else
-			memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu)));
+			load_gs_base(cpu);
 #endif
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index a09abb8fb97..c9740996430 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -220,8 +220,7 @@ SECTIONS
    * so that it can be accessed as a percpu variable.
    */
   . = ALIGN(PAGE_SIZE);
-  PERCPU_VADDR_PREALLOC(0, :percpu, pda_size)
-  per_cpu____pda = __per_cpu_start;
+  PERCPU_VADDR(0, :percpu)
 #else
   PERCPU(PAGE_SIZE)
 #endif
@@ -262,3 +261,8 @@ SECTIONS
  */
 ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
 	"kernel image bigger than KERNEL_IMAGE_SIZE")
+
+#ifdef CONFIG_SMP
+ASSERT((per_cpu__irq_stack_union == 0),
+        "irq_stack_union is not at start of per-cpu area");
+#endif
-- 
cgit v1.2.3


From 0d974d4592708f85044751817da4b7016e1b0602 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Sun, 18 Jan 2009 19:52:25 -0500
Subject: x86: remove pda.h

Impact: cleanup

Signed-off-by: Brian Gerst <brgerst@gmail.com>
---
 arch/x86/include/asm/pda.h        | 39 ---------------------------------------
 arch/x86/include/asm/pgtable_64.h |  1 -
 arch/x86/include/asm/smp.h        |  1 -
 arch/x86/kernel/asm-offsets_64.c  |  1 -
 arch/x86/kernel/cpu/common.c      |  1 -
 arch/x86/kernel/process_64.c      |  1 -
 arch/x86/kernel/traps.c           |  1 -
 7 files changed, 45 deletions(-)
 delete mode 100644 arch/x86/include/asm/pda.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
deleted file mode 100644
index ba46416634f..00000000000
--- a/arch/x86/include/asm/pda.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _ASM_X86_PDA_H
-#define _ASM_X86_PDA_H
-
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/page.h>
-#include <asm/percpu.h>
-
-/* Per processor datastructure. %gs points to it while the kernel runs */
-struct x8664_pda {
-	unsigned long unused1;
-	unsigned long unused2;
-	unsigned long unused3;
-	unsigned long unused4;
-	int unused5;
-	unsigned int unused6;		/* 36 was cpunumber */
-	short in_bootmem;		/* pda lives in bootmem */
-} ____cacheline_aligned_in_smp;
-
-DECLARE_PER_CPU(struct x8664_pda, __pda);
-
-#define cpu_pda(cpu)		(&per_cpu(__pda, cpu))
-
-#define read_pda(field)		percpu_read(__pda.field)
-#define write_pda(field, val)	percpu_write(__pda.field, val)
-#define add_pda(field, val)	percpu_add(__pda.field, val)
-#define sub_pda(field, val)	percpu_sub(__pda.field, val)
-#define or_pda(field, val)	percpu_or(__pda.field, val)
-
-/* This is not atomic against other CPUs -- CPU preemption needs to be off */
-#define test_and_clear_bit_pda(bit, field)				\
-	x86_test_and_clear_bit_percpu(bit, __pda.field)
-
-#endif
-
-#endif /* _ASM_X86_PDA_H */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index ba09289acca..1df9637dfda 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -11,7 +11,6 @@
 #include <asm/processor.h>
 #include <linux/bitops.h>
 #include <linux/threads.h>
-#include <asm/pda.h>
 
 extern pud_t level3_kernel_pgt[512];
 extern pud_t level3_ident_pgt[512];
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 68636e767a9..45ef8a1b9d7 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -15,7 +15,6 @@
 #  include <asm/io_apic.h>
 # endif
 #endif
-#include <asm/pda.h>
 #include <asm/thread_info.h>
 #include <asm/cpumask.h>
 
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 94f9c8b39d2..8793ab33e2c 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -11,7 +11,6 @@
 #include <linux/hardirq.h>
 #include <linux/suspend.h>
 #include <linux/kbuild.h>
-#include <asm/pda.h>
 #include <asm/processor.h>
 #include <asm/segment.h>
 #include <asm/thread_info.h>
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 098934e72a1..3887fcf6e51 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -30,7 +30,6 @@
 #include <asm/genapic.h>
 #endif
 
-#include <asm/pda.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/desc.h>
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 088bc9a0f82..c422eebb0c5 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -47,7 +47,6 @@
 #include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/mmu_context.h>
-#include <asm/pda.h>
 #include <asm/prctl.h>
 #include <asm/desc.h>
 #include <asm/proto.h>
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 98c2d055284..ed5aee5f3fc 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -59,7 +59,6 @@
 #ifdef CONFIG_X86_64
 #include <asm/pgalloc.h>
 #include <asm/proto.h>
-#include <asm/pda.h>
 #else
 #include <asm/processor-flags.h>
 #include <asm/arch_hooks.h>
-- 
cgit v1.2.3


From 5766b842b23c6b40935a5f3bd435b2bcdaff2143 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 20 Jan 2009 09:13:15 +0100
Subject: x86, cpumask: fix tlb flush race

Impact: fix bootup crash

The cpumask is now passed in as a reference to mm->cpu_vm_mask, not on
the stack - hence it is not constant anymore during the TLB flush.

That way it could race and some static sanity checks would trigger:

[  238.154287] ------------[ cut here ]------------
[  238.156039] kernel BUG at arch/x86/kernel/tlb_32.c:130!
[  238.156039] invalid opcode: 0000 [#1] SMP
[  238.156039] last sysfs file: /sys/class/net/eth2/address
[  238.156039] Modules linked in:
[  238.156039]
[  238.156039] Pid: 6493, comm: ifup-eth Not tainted (2.6.29-rc2-tip #1) P4DC6
[  238.156039] EIP: 0060:[<c0118f87>] EFLAGS: 00010202 CPU: 2
[  238.156039] EIP is at native_flush_tlb_others+0x35/0x158
[  238.156039] EAX: c0ef972c EBX: f6143301 ECX: 00000000 EDX: 00000000
[  238.156039] ESI: f61433a8 EDI: f6143200 EBP: f34f3e00 ESP: f34f3df0
[  238.156039]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[  238.156039] Process ifup-eth (pid: 6493, ti=f34f2000 task=f399ab00 task.ti=f34f2000)
[  238.156039] Stack:
[  238.156039]  ffffffff f61433a8 ffffffff f6143200 f34f3e18 c0118e9c 00000000 f6143200
[  238.156039]  f61433a8 f5bec738 f34f3e28 c0119435 c2b5b830 f6143200 f34f3e34 c01c2dc3
[  238.156039]  bffd9000 f34f3e60 c01c3051 00000000 ffffffff f34f3e4c 00000000 00000071
[  238.156039] Call Trace:
[  238.156039]  [<c0118e9c>] ? flush_tlb_others+0x52/0x5b
[  238.156039]  [<c0119435>] ? flush_tlb_mm+0x7f/0x8b
[  238.156039]  [<c01c2dc3>] ? tlb_finish_mmu+0x2d/0x55
[  238.156039]  [<c01c3051>] ? exit_mmap+0x124/0x170
[  238.156039]  [<c013e965>] ? mmput+0x40/0xf5
[  238.156039]  [<c01e4788>] ? flush_old_exec+0x640/0x94b
[  238.156039]  [<c01ddb4e>] ? fsnotify_access+0x37/0x39
[  238.156039]  [<c01e3435>] ? kernel_read+0x39/0x4b
[  238.156039]  [<c021bc8a>] ? load_elf_binary+0x4a1/0x11bb
[  238.156039]  [<c01c0af9>] ? might_fault+0x51/0x9c
[  238.156039]  [<c010a2cc>] ? paravirt_read_tsc+0x20/0x4f
[  238.156039]  [<c010a406>] ? native_sched_clock+0x5d/0x60
[  238.156039]  [<c01e2fda>] ? search_binary_handler+0xab/0x2c4
[  238.156039]  [<c021b7e9>] ? load_elf_binary+0x0/0x11bb
[  238.156039]  [<c04ae9a5>] ? _raw_read_unlock+0x21/0x46
[  238.156039]  [<c021b7e9>] ? load_elf_binary+0x0/0x11bb
[  238.156039]  [<c01e2fe1>] ? search_binary_handler+0xb2/0x2c4
[  238.156039]  [<c01e4076>] ? do_execve+0x21c/0x2ee
[  238.156039]  [<c01029b7>] ? sys_execve+0x51/0x8c
[  238.156039]  [<c0103eaf>] ? sysenter_do_call+0x12/0x43

Fix it by not assuming that the cpumask is constant.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_32.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index ec53818f4e3..d37bbfcb813 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -125,9 +125,8 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 			     struct mm_struct *mm, unsigned long va)
 {
 	/*
-	 * - mask must exist :)
+	 * mm must exist :)
 	 */
-	BUG_ON(cpumask_empty(cpumask));
 	BUG_ON(!mm);
 
 	/*
@@ -138,14 +137,18 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 	spin_lock(&tlbstate_lock);
 
 	cpumask_andnot(flush_cpumask, cpumask, cpumask_of(smp_processor_id()));
-#ifdef CONFIG_HOTPLUG_CPU
-	/* If a CPU which we ran on has gone down, OK. */
 	cpumask_and(flush_cpumask, flush_cpumask, cpu_online_mask);
+
+	/*
+	 * If a task whose mm mask we are looking at has descheduled and
+	 * has cleared its presence from the mask, or if a CPU which we ran
+	 * on has gone down then there might be no flush work left:
+	 */
 	if (unlikely(cpumask_empty(flush_cpumask))) {
 		spin_unlock(&tlbstate_lock);
 		return;
 	}
-#endif
+
 	flush_mm = mm;
 	flush_va = va;
 
-- 
cgit v1.2.3


From 92181f190b649f7ef2b79cbf5c00f26ccc66da2a Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 20 Jan 2009 04:24:26 +0100
Subject: x86: optimise x86's do_page_fault (C entry point for the page fault
 path)

Impact: cleanup, restructure code to improve assembly

gcc isn't _all_ that smart about spilling registers to stack or reusing
stack slots, even with branch annotations. do_page_fault contained a lot
of functionality, so split unlikely paths into their own functions, and
mark them as noinline just to be sure. I consider this actually to be
somewhat of a cleanup too: the main function now contains about half
the number of lines so the normal path is easier to read, while the error
cases are also nicely split away.

Also, ensure the order of arguments to functions is always the same: regs,
addr, error_code. This can reduce code size a tiny bit, and just looks neater
too.

And add a couple of branch annotations.

Before:
  do_page_fault:
          subq    $360, %rsp      #,

After:
  do_page_fault:
          subq    $56, %rsp       #,

bloat-o-meter:
  add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542)
  function                                     old     new   delta
  __bad_area_nosemaphore                         -     506    +506
  no_context                                     -     474    +474
  vmalloc_fault                                  -     424    +424
  spurious_fault                                 -     358    +358
  mm_fault_error                                 -     272    +272
  bad_area_access_error                          -      89     +89
  bad_area                                       -      89     +89
  bad_area_nosemaphore                           -      10     +10
  do_page_fault                               2464     784   -1680

Yes, the total size increases by 542 bytes, due to the extra function calls.
But these will very rarely be called (except for vmalloc_fault) in a normal
workload. Importantly, do_page_fault is less than 1/3rd it's original size,
and touches far less stack.

Existing gotos and branch hints did move a lot of the infrequently used text
out of the fastpath, but that's even further improved after this patch.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 438 ++++++++++++++++++++++++++++++----------------------
 1 file changed, 256 insertions(+), 182 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 90dfae511a4..033292dc9e2 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -91,8 +91,8 @@ static inline int notify_page_fault(struct pt_regs *regs)
  *
  * Opcode checker based on code by Richard Brunner
  */
-static int is_prefetch(struct pt_regs *regs, unsigned long addr,
-		       unsigned long error_code)
+static int is_prefetch(struct pt_regs *regs, unsigned long error_code,
+			unsigned long addr)
 {
 	unsigned char *instr;
 	int scan_more = 1;
@@ -409,15 +409,15 @@ static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 }
 
 #ifdef CONFIG_X86_64
-static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
-				 unsigned long error_code)
+static noinline void pgtable_bad(struct pt_regs *regs,
+			 unsigned long error_code, unsigned long address)
 {
 	unsigned long flags = oops_begin();
 	int sig = SIGKILL;
-	struct task_struct *tsk;
+	struct task_struct *tsk = current;
 
 	printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
-	       current->comm, address);
+	       tsk->comm, address);
 	dump_pagetable(address);
 	tsk = current;
 	tsk->thread.cr2 = address;
@@ -429,6 +429,190 @@ static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
 }
 #endif
 
+static noinline void no_context(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address)
+{
+	struct task_struct *tsk = current;
+#ifdef CONFIG_X86_64
+	unsigned long flags;
+	int sig;
+#endif
+
+	/* Are we prepared to handle this kernel fault?  */
+	if (fixup_exception(regs))
+		return;
+
+	/*
+	 * X86_32
+	 * Valid to do another page fault here, because if this fault
+	 * had been triggered by is_prefetch fixup_exception would have
+	 * handled it.
+	 *
+	 * X86_64
+	 * Hall of shame of CPU/BIOS bugs.
+	 */
+	if (is_prefetch(regs, error_code, address))
+		return;
+
+	if (is_errata93(regs, address))
+		return;
+
+	/*
+	 * Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+#ifdef CONFIG_X86_32
+	bust_spinlocks(1);
+#else
+	flags = oops_begin();
+#endif
+
+	show_fault_oops(regs, error_code, address);
+
+	tsk->thread.cr2 = address;
+	tsk->thread.trap_no = 14;
+	tsk->thread.error_code = error_code;
+
+#ifdef CONFIG_X86_32
+	die("Oops", regs, error_code);
+	bust_spinlocks(0);
+	do_exit(SIGKILL);
+#else
+	sig = SIGKILL;
+	if (__die("Oops", regs, error_code))
+		sig = 0;
+	/* Executive summary in case the body of the oops scrolled away */
+	printk(KERN_EMERG "CR2: %016lx\n", address);
+	oops_end(flags, regs, sig);
+#endif
+}
+
+static void __bad_area_nosemaphore(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address,
+			int si_code)
+{
+	struct task_struct *tsk = current;
+
+	/* User mode accesses just cause a SIGSEGV */
+	if (error_code & PF_USER) {
+		/*
+		 * It's possible to have interrupts off here.
+		 */
+		local_irq_enable();
+
+		/*
+		 * Valid to do another page fault here because this one came
+		 * from user space.
+		 */
+		if (is_prefetch(regs, error_code, address))
+			return;
+
+		if (is_errata100(regs, address))
+			return;
+
+		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
+		    printk_ratelimit()) {
+			printk(
+			"%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+			task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+			tsk->comm, task_pid_nr(tsk), address,
+			(void *) regs->ip, (void *) regs->sp, error_code);
+			print_vma_addr(" in ", regs->ip);
+			printk("\n");
+		}
+
+		tsk->thread.cr2 = address;
+		/* Kernel addresses are always protection faults */
+		tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+		tsk->thread.trap_no = 14;
+		force_sig_info_fault(SIGSEGV, si_code, address, tsk);
+		return;
+	}
+
+	if (is_f00f_bug(regs, address))
+		return;
+
+	no_context(regs, error_code, address);
+}
+
+static noinline void bad_area_nosemaphore(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address)
+{
+	__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
+}
+
+static void __bad_area(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address,
+			int si_code)
+{
+	struct mm_struct *mm = current->mm;
+
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+	up_read(&mm->mmap_sem);
+
+	__bad_area_nosemaphore(regs, error_code, address, si_code);
+}
+
+static noinline void bad_area(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address)
+{
+	__bad_area(regs, error_code, address, SEGV_MAPERR);
+}
+
+static noinline void bad_area_access_error(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address)
+{
+	__bad_area(regs, error_code, address, SEGV_ACCERR);
+}
+
+/* TODO: fixup for "mm-invoke-oom-killer-from-page-fault.patch" */
+static void out_of_memory(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address)
+{
+	/*
+	 * We ran out of memory, call the OOM killer, and return the userspace
+	 * (which will retry the fault, or kill us if we got oom-killed).
+	 */
+	up_read(&current->mm->mmap_sem);
+	pagefault_out_of_memory();
+}
+
+static void do_sigbus(struct pt_regs *regs,
+			unsigned long error_code, unsigned long address)
+{
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+
+	up_read(&mm->mmap_sem);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!(error_code & PF_USER))
+		no_context(regs, error_code, address);
+#ifdef CONFIG_X86_32
+	/* User space => ok to do another page fault */
+	if (is_prefetch(regs, error_code, address))
+		return;
+#endif
+	tsk->thread.cr2 = address;
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = 14;
+	force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+}
+
+static noinline void mm_fault_error(struct pt_regs *regs,
+		unsigned long error_code, unsigned long address, unsigned int fault)
+{
+	if (fault & VM_FAULT_OOM)
+		out_of_memory(regs, error_code, address);
+	else if (fault & VM_FAULT_SIGBUS)
+		do_sigbus(regs, error_code, address);
+	else
+		BUG();
+}
+
 static int spurious_fault_check(unsigned long error_code, pte_t *pte)
 {
 	if ((error_code & PF_WRITE) && !pte_write(*pte))
@@ -448,8 +632,8 @@ static int spurious_fault_check(unsigned long error_code, pte_t *pte)
  * There are no security implications to leaving a stale TLB when
  * increasing the permissions on a page.
  */
-static int spurious_fault(unsigned long address,
-			  unsigned long error_code)
+static noinline int spurious_fault(unsigned long error_code,
+				unsigned long address)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -494,7 +678,7 @@ static int spurious_fault(unsigned long address,
  *
  * This assumes no large pages in there.
  */
-static int vmalloc_fault(unsigned long address)
+static noinline int vmalloc_fault(unsigned long address)
 {
 #ifdef CONFIG_X86_32
 	unsigned long pgd_paddr;
@@ -573,6 +757,25 @@ static int vmalloc_fault(unsigned long address)
 
 int show_unhandled_signals = 1;
 
+static inline int access_error(unsigned long error_code, int write,
+				struct vm_area_struct *vma)
+{
+	if (write) {
+		/* write, present and write, not present */
+		if (unlikely(!(vma->vm_flags & VM_WRITE)))
+			return 1;
+	} else if (unlikely(error_code & PF_PROT)) {
+		/* read, present */
+		return 1;
+	} else {
+		/* read, not present */
+		if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+			return 1;
+	}
+
+	return 0;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -583,16 +786,12 @@ asmlinkage
 #endif
 void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
+	unsigned long address;
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct *vma;
-	unsigned long address;
-	int write, si_code;
+	int write;
 	int fault;
-#ifdef CONFIG_X86_64
-	unsigned long flags;
-	int sig;
-#endif
 
 	tsk = current;
 	mm = tsk->mm;
@@ -601,9 +800,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	/* get the address */
 	address = read_cr2();
 
-	si_code = SEGV_MAPERR;
-
-	if (notify_page_fault(regs))
+	if (unlikely(notify_page_fault(regs)))
 		return;
 	if (unlikely(kmmio_fault(regs, address)))
 		return;
@@ -631,17 +828,17 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 			return;
 
 		/* Can handle a stale RO->RW TLB */
-		if (spurious_fault(address, error_code))
+		if (spurious_fault(error_code, address))
 			return;
 
 		/*
 		 * Don't take the mm semaphore here. If we fixup a prefetch
 		 * fault we could otherwise deadlock.
 		 */
-		goto bad_area_nosemaphore;
+		bad_area_nosemaphore(regs, error_code, address);
+		return;
 	}
 
-
 	/*
 	 * It's safe to allow irq's after cr2 has been saved and the
 	 * vmalloc fault has been handled.
@@ -657,15 +854,17 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
 #ifdef CONFIG_X86_64
 	if (unlikely(error_code & PF_RSVD))
-		pgtable_bad(address, regs, error_code);
+		pgtable_bad(regs, error_code, address);
 #endif
 
 	/*
 	 * If we're in an interrupt, have no user context or are running in an
 	 * atomic region then we must not take the fault.
 	 */
-	if (unlikely(in_atomic() || !mm))
-		goto bad_area_nosemaphore;
+	if (unlikely(in_atomic() || !mm)) {
+		bad_area_nosemaphore(regs, error_code, address);
+		return;
+	}
 
 	/*
 	 * When running in the kernel we expect faults to occur only to
@@ -683,20 +882,26 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 * source.  If this is invalid we can skip the address space check,
 	 * thus avoiding the deadlock.
 	 */
-	if (!down_read_trylock(&mm->mmap_sem)) {
+	if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
 		if ((error_code & PF_USER) == 0 &&
-		    !search_exception_tables(regs->ip))
-			goto bad_area_nosemaphore;
+		    !search_exception_tables(regs->ip)) {
+			bad_area_nosemaphore(regs, error_code, address);
+			return;
+		}
 		down_read(&mm->mmap_sem);
 	}
 
 	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
+	if (unlikely(!vma)) {
+		bad_area(regs, error_code, address);
+		return;
+	}
+	if (likely(vma->vm_start <= address))
 		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
+	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
+		bad_area(regs, error_code, address);
+		return;
+	}
 	if (error_code & PF_USER) {
 		/*
 		 * Accessing the stack below %sp is always a bug.
@@ -704,31 +909,25 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		 * and pusha to work.  ("enter $65535,$31" pushes
 		 * 32 pointers and then decrements %sp by 65535.)
 		 */
-		if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp)
-			goto bad_area;
+		if (unlikely(address + 65536 + 32 * sizeof(unsigned long) < regs->sp)) {
+			bad_area(regs, error_code, address);
+			return;
+		}
 	}
-	if (expand_stack(vma, address))
-		goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
+	if (unlikely(expand_stack(vma, address))) {
+		bad_area(regs, error_code, address);
+		return;
+	}
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
 good_area:
-	si_code = SEGV_ACCERR;
-	write = 0;
-	switch (error_code & (PF_PROT|PF_WRITE)) {
-	default:	/* 3: write, present */
-		/* fall through */
-	case PF_WRITE:		/* write, not present */
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-		write++;
-		break;
-	case PF_PROT:		/* read, present */
-		goto bad_area;
-	case 0:			/* read, not present */
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto bad_area;
+	write = error_code & PF_WRITE;
+	if (unlikely(access_error(error_code, write, vma))) {
+		bad_area_access_error(regs, error_code, address);
+		return;
 	}
 
 	/*
@@ -738,11 +937,8 @@ good_area:
 	 */
 	fault = handle_mm_fault(mm, vma, address, write);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
+		mm_fault_error(regs, error_code, address, fault);
+		return;
 	}
 	if (fault & VM_FAULT_MAJOR)
 		tsk->maj_flt++;
@@ -760,128 +956,6 @@ good_area:
 	}
 #endif
 	up_read(&mm->mmap_sem);
-	return;
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
-bad_area:
-	up_read(&mm->mmap_sem);
-
-bad_area_nosemaphore:
-	/* User mode accesses just cause a SIGSEGV */
-	if (error_code & PF_USER) {
-		/*
-		 * It's possible to have interrupts off here.
-		 */
-		local_irq_enable();
-
-		/*
-		 * Valid to do another page fault here because this one came
-		 * from user space.
-		 */
-		if (is_prefetch(regs, address, error_code))
-			return;
-
-		if (is_errata100(regs, address))
-			return;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-		    printk_ratelimit()) {
-			printk(
-			"%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
-			task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
-			tsk->comm, task_pid_nr(tsk), address,
-			(void *) regs->ip, (void *) regs->sp, error_code);
-			print_vma_addr(" in ", regs->ip);
-			printk("\n");
-		}
-
-		tsk->thread.cr2 = address;
-		/* Kernel addresses are always protection faults */
-		tsk->thread.error_code = error_code | (address >= TASK_SIZE);
-		tsk->thread.trap_no = 14;
-		force_sig_info_fault(SIGSEGV, si_code, address, tsk);
-		return;
-	}
-
-	if (is_f00f_bug(regs, address))
-		return;
-
-no_context:
-	/* Are we prepared to handle this kernel fault?  */
-	if (fixup_exception(regs))
-		return;
-
-	/*
-	 * X86_32
-	 * Valid to do another page fault here, because if this fault
-	 * had been triggered by is_prefetch fixup_exception would have
-	 * handled it.
-	 *
-	 * X86_64
-	 * Hall of shame of CPU/BIOS bugs.
-	 */
-	if (is_prefetch(regs, address, error_code))
-		return;
-
-	if (is_errata93(regs, address))
-		return;
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
-#ifdef CONFIG_X86_32
-	bust_spinlocks(1);
-#else
-	flags = oops_begin();
-#endif
-
-	show_fault_oops(regs, error_code, address);
-
-	tsk->thread.cr2 = address;
-	tsk->thread.trap_no = 14;
-	tsk->thread.error_code = error_code;
-
-#ifdef CONFIG_X86_32
-	die("Oops", regs, error_code);
-	bust_spinlocks(0);
-	do_exit(SIGKILL);
-#else
-	sig = SIGKILL;
-	if (__die("Oops", regs, error_code))
-		sig = 0;
-	/* Executive summary in case the body of the oops scrolled away */
-	printk(KERN_EMERG "CR2: %016lx\n", address);
-	oops_end(flags, regs, sig);
-#endif
-
-out_of_memory:
-	/*
-	 * We ran out of memory, call the OOM killer, and return the userspace
-	 * (which will retry the fault, or kill us if we got oom-killed).
-	 */
-	up_read(&mm->mmap_sem);
-	pagefault_out_of_memory();
-	return;
-
-do_sigbus:
-	up_read(&mm->mmap_sem);
-
-	/* Kernel mode? Handle exceptions or die */
-	if (!(error_code & PF_USER))
-		goto no_context;
-#ifdef CONFIG_X86_32
-	/* User space => ok to do another page fault */
-	if (is_prefetch(regs, address, error_code))
-		return;
-#endif
-	tsk->thread.cr2 = address;
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 14;
-	force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
 }
 
 DEFINE_SPINLOCK(pgd_lock);
-- 
cgit v1.2.3


From afb33f8c0d7dea8c48ae1c2e3af5b437aa8dd7bb Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Mon, 12 Jan 2009 12:53:45 +0100
Subject: x86: remove byte locks

Impact: cleanup

Remove byte locks implementation, which was introduced by Jeremy in
8efcbab6 ("paravirt: introduce a "lock-byte" spinlock implementation"),
but turned out to be dead code that is not used by any in-kernel
virtualization guest (Xen uses its own variant of spinlocks implementation
and KVM is not planning to move to byte locks).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/paravirt.h      |  2 --
 arch/x86/include/asm/spinlock.h      | 66 ++----------------------------------
 arch/x86/kernel/paravirt-spinlocks.c | 10 ------
 3 files changed, 2 insertions(+), 76 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index ba3e2ff6aed..32bc6c2c138 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1389,8 +1389,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 void _paravirt_nop(void);
 #define paravirt_nop	((void *)_paravirt_nop)
 
-void paravirt_use_bytelocks(void);
-
 #ifdef CONFIG_SMP
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index d17c91981da..2bd6b111a41 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -172,70 +172,8 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
 }
 
-#ifdef CONFIG_PARAVIRT
-/*
- * Define virtualization-friendly old-style lock byte lock, for use in
- * pv_lock_ops if desired.
- *
- * This differs from the pre-2.6.24 spinlock by always using xchgb
- * rather than decb to take the lock; this allows it to use a
- * zero-initialized lock structure.  It also maintains a 1-byte
- * contention counter, so that we can implement
- * __byte_spin_is_contended.
- */
-struct __byte_spinlock {
-	s8 lock;
-	s8 spinners;
-};
-
-static inline int __byte_spin_is_locked(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	return bl->lock != 0;
-}
-
-static inline int __byte_spin_is_contended(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	return bl->spinners != 0;
-}
-
-static inline void __byte_spin_lock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	s8 val = 1;
-
-	asm("1: xchgb %1, %0\n"
-	    "   test %1,%1\n"
-	    "   jz 3f\n"
-	    "   " LOCK_PREFIX "incb %2\n"
-	    "2: rep;nop\n"
-	    "   cmpb $1, %0\n"
-	    "   je 2b\n"
-	    "   " LOCK_PREFIX "decb %2\n"
-	    "   jmp 1b\n"
-	    "3:"
-	    : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory");
-}
-
-static inline int __byte_spin_trylock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	u8 old = 1;
-
-	asm("xchgb %1,%0"
-	    : "+m" (bl->lock), "+q" (old) : : "memory");
+#ifndef CONFIG_PARAVIRT
 
-	return old == 0;
-}
-
-static inline void __byte_spin_unlock(raw_spinlock_t *lock)
-{
-	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
-	smp_wmb();
-	bl->lock = 0;
-}
-#else  /* !CONFIG_PARAVIRT */
 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
 {
 	return __ticket_spin_is_locked(lock);
@@ -267,7 +205,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
 	__raw_spin_lock(lock);
 }
 
-#endif	/* CONFIG_PARAVIRT */
+#endif
 
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
index 95777b0faa7..3a7c5a44082 100644
--- a/arch/x86/kernel/paravirt-spinlocks.c
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -26,13 +26,3 @@ struct pv_lock_ops pv_lock_ops = {
 };
 EXPORT_SYMBOL(pv_lock_ops);
 
-void __init paravirt_use_bytelocks(void)
-{
-#ifdef CONFIG_SMP
-	pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
-	pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
-	pv_lock_ops.spin_lock = __byte_spin_lock;
-	pv_lock_ops.spin_trylock = __byte_spin_trylock;
-	pv_lock_ops.spin_unlock = __byte_spin_unlock;
-#endif
-}
-- 
cgit v1.2.3


From 0f6ff0f06cc126e8dfaa20c8c6da53537e352378 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 20 Nov 2008 00:58:38 +0100
Subject: [ARM] pxa: PalmT5 initial support

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig               |  10 +
 arch/arm/mach-pxa/Makefile              |   1 +
 arch/arm/mach-pxa/include/mach/palmt5.h |  84 ++++++
 arch/arm/mach-pxa/palmt5.c              | 497 ++++++++++++++++++++++++++++++++
 4 files changed, 592 insertions(+)
 create mode 100644 arch/arm/mach-pxa/include/mach/palmt5.h
 create mode 100644 arch/arm/mach-pxa/palmt5.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8eea7306f29..9223ba607a7 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -319,6 +319,16 @@ config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
 
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
+
 config MACH_PALMTX
 	bool "Palm T|X"
 	default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 7b28bb561d6..0d0afe84ec5 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
new file mode 100644
index 00000000000..94db2881f04
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -0,0 +1,84 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors:	Ales Snuparek <snuparek@atlas.cz>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Justin Kendrick <twilightsentry@gmail.com>
+ *		RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET		1
+
+#define GPIO_NR_PALMT5_POWER_DETECT		90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N		14
+#define GPIO_NR_PALMT5_SD_POWER			114
+#define GPIO_NR_PALMT5_SD_READONLY		115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ		27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N		15
+#define GPIO_NR_PALMT5_USB_POWER		95
+#define GPIO_NR_PALMT5_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER			84
+#define GPIO_NR_PALMT5_LCD_POWER		96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER			17
+#define GPIO_NR_PALMT5_BT_RESET			83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMT5_PHYS_RAM_START	0xa0000000
+#define PALMT5_PHYS_IO_START	0x40000000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME		21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY		0xFE
+#define PALMT5_DEFAULT_INTENSITY	0x7E
+#define PALMT5_LIMIT_MASK		0x7F
+#define PALMT5_PRESCALER		0x3F
+#define PALMT5_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
new file mode 100644
index 00000000000..51b4a602551
--- /dev/null
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -0,0 +1,497 @@
+/*
+ * Hardware definitions for Palm Tungsten|T5
+ *
+ * Author:	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Ales Snuparek <snuparek@atlas.cz>
+ *		Justin Kendrick <twilightsentry@gmail.com>
+ *		RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmt5.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmt5_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* USB */
+	GPIO15_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* MISC */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO90_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
+			palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
+	if (err)
+		goto err4;
+
+	err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+err4:
+	gpio_free(GPIO_NR_PALMT5_SD_POWER);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmt5_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+	gpio_free(GPIO_NR_PALMT5_SD_POWER);
+	free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
+	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+}
+
+static void palmt5_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmt5_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmt5_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmt5_mci_power,
+	.get_ro		= palmt5_mci_get_ro,
+	.init 		= palmt5_mci_init,
+	.exit		= palmt5_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmt5_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmt5_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmt5_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmt5_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
+	.buttons	= palmt5_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
+};
+
+static struct platform_device palmt5_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmt5_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmt5_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMT5_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmt5_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmt5_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMT5_BL_POWER);
+	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmt5_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMT5_MAX_INTENSITY,
+	.dft_brightness	= PALMT5_MAX_INTENSITY,
+	.pwm_period_ns	= PALMT5_PERIOD_NS,
+	.init		= palmt5_backlight_init,
+	.notify		= palmt5_backlight_notify,
+	.exit		= palmt5_backlight_exit,
+};
+
+static struct platform_device palmt5_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmt5_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmt5_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmt5_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+}
+
+static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmt5_ficp_platform_data = {
+	.startup		= palmt5_irda_startup,
+	.shutdown		= palmt5_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmt5_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_PALMT5_USB_POWER,
+	.gpio_pullup_inverted	= 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmt5_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static char *palmt5_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmt5_is_ac_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmt5_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmt5_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMT5_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMT5_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmt5_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmt5_lcd_screen = {
+	.modes		= palmt5_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmt5_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmt5_pxa_keys,
+#endif
+	&palmt5_backlight,
+	&power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmt5_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMT5_USB_POWER);
+	}
+}
+
+static void __init palmt5_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+
+	set_pxa_fb_info(&palmt5_lcd_screen);
+	pxa_set_mci_info(&palmt5_mci_platform_data);
+	palmt5_udc_init();
+	pxa_set_udc_info(&palmt5_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmt5_ficp_platform_data);
+	pxa_set_keypad_info(&palmt5_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMT5, "Palm Tungsten|T5")
+	.phys_io	= PALMT5_PHYS_IO_START,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmt5_init
+MACHINE_END
-- 
cgit v1.2.3


From a645072a608356990b2737a48ecc1bfb66981599 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 20 Nov 2008 22:50:46 +0100
Subject: [ARM] pxa: PalmLD initial support

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig               |  10 +
 arch/arm/mach-pxa/Makefile              |   1 +
 arch/arm/mach-pxa/include/mach/palmld.h | 109 ++++++
 arch/arm/mach-pxa/palmld.c              | 566 ++++++++++++++++++++++++++++++++
 4 files changed, 686 insertions(+)
 create mode 100644 arch/arm/mach-pxa/include/mach/palmld.h
 create mode 100644 arch/arm/mach-pxa/palmld.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 9223ba607a7..af5b5b463a2 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -349,6 +349,16 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
+config MACH_PALMLD
+	bool "Palm LifeDrive"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0d0afe84ec5..146aba72fa2 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
new file mode 100644
index 00000000000..7c295a48d78
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -0,0 +1,109 @@
+/*
+ * GPIOs and interrupts for Palm LifeDrive Handheld Computer
+ *
+ * Authors:	Alex Osborne <ato@meshy.org>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMLD_H_
+#define _INCLUDE_PALMLD_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMLD_GPIO_RESET	1
+#define GPIO_NR_PALMLD_POWER_DETECT	4
+#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
+#define GPIO_NR_PALMLD_POWER_SWITCH	12
+#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
+#define GPIO_NR_PALMLD_LOCK_SWITCH	15
+
+/* SD/MMC */
+#define GPIO_NR_PALMLD_SD_DETECT_N	14
+#define GPIO_NR_PALMLD_SD_POWER		114
+#define GPIO_NR_PALMLD_SD_READONLY	116
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMLD_WM9712_IRQ	27
+
+/* IRDA */
+#define GPIO_NR_PALMLD_IR_DISABLE	108
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMLD_BL_POWER		19
+#define GPIO_NR_PALMLD_LCD_POWER	96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMLD_BORDER_SWITCH	21
+#define GPIO_NR_PALMLD_BORDER_SELECT	22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMLD_BT_POWER		17
+#define GPIO_NR_PALMLD_BT_RESET		83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMLD_PCMCIA_READY	38
+#define GPIO_NR_PALMLD_PCMCIA_POWER	36
+#define GPIO_NR_PALMLD_PCMCIA_RESET	81
+
+/* LEDs */
+#define GPIO_NR_PALMLD_LED_GREEN	52
+#define GPIO_NR_PALMLD_LED_AMBER	94
+
+/* IDE */
+#define GPIO_NR_PALMLD_IDE_IRQ		95
+#define GPIO_NR_PALMLD_IDE_RESET	98
+#define GPIO_NR_PALMLD_IDE_PWEN		115
+
+/* USB */
+#define GPIO_NR_PALMLD_USB_DETECT_N	3
+#define GPIO_NR_PALMLD_USB_READY	86
+#define GPIO_NR_PALMLD_USB_RESET	88
+#define GPIO_NR_PALMLD_USB_INT		106
+#define GPIO_NR_PALMLD_USB_POWER	118
+/* 20, 53 and 86 are usb related too */
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMLD_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ		IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+
+
+/** HERE ARE INIT VALUES **/
+
+/* IO mappings */
+#define PALMLD_USB_PHYS		PXA_CS2_PHYS
+#define PALMLD_USB_VIRT		0xf0000000
+#define PALMLD_USB_SIZE		0x00100000
+
+#define PALMLD_IDE_PHYS		0x20000000
+#define PALMLD_IDE_VIRT		0xf1000000
+#define PALMLD_IDE_SIZE		0x00100000
+
+#define PALMLD_PHYS_IO_START	0x40000000
+
+/* BATTERY */
+#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
+#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
+#define PALMLD_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
+
+#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMLD_MAX_INTENSITY		0xFE
+#define PALMLD_DEFAULT_INTENSITY	0x7E
+#define PALMLD_LIMIT_MASK		0x7F
+#define PALMLD_PRESCALER		0x3F
+#define PALMLD_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
new file mode 100644
index 00000000000..55a2c40b6f2
--- /dev/null
+++ b/arch/arm/mach-pxa/palmld.c
@@ -0,0 +1,566 @@
+/*
+ * Hardware definitions for Palm LifeDrive
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmld.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmld_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO116_GPIO,	/* SD r/o switch */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO108_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* GPIO KEYS */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power switch */
+	GPIO15_GPIO,	/* lock switch */
+
+	/* LEDs */
+	GPIO52_GPIO,	/* green led */
+	GPIO94_GPIO,	/* orange led */
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO36_GPIO,	/* wifi power */
+	GPIO38_GPIO,	/* wifi ready */
+	GPIO81_GPIO,	/* wifi reset */
+
+	/* HDD */
+	GPIO95_GPIO,	/* HDD irq */
+	GPIO115_GPIO,	/* HDD power */
+
+	/* MISC */
+	GPIO13_GPIO,	/* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
+			palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
+	if (err)
+		goto err4;
+
+	err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+err4:
+	gpio_free(GPIO_NR_PALMLD_SD_POWER);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmld_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+	gpio_free(GPIO_NR_PALMLD_SD_POWER);
+	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+}
+
+static void palmld_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmld_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmld_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmld_mci_power,
+	.get_ro		= palmld_mci_get_ro,
+	.init 		= palmld_mci_init,
+	.exit		= palmld_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmld_matrix_keys[] = {
+	KEY(0, 1, KEY_F2),
+	KEY(0, 2, KEY_UP),
+
+	KEY(1, 0, KEY_F3),
+	KEY(1, 1, KEY_F4),
+	KEY(1, 2, KEY_RIGHT),
+
+	KEY(2, 0, KEY_F1),
+	KEY(2, 1, KEY_F5),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_F6),
+	KEY(3, 1, KEY_ENTER),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmld_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmld_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmld_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
+	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
+};
+
+static struct gpio_keys_platform_data palmld_pxa_keys_data = {
+	.buttons	= palmld_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
+};
+
+static struct platform_device palmld_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmld_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmld_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMLD_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmld_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmld_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMLD_BL_POWER);
+	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmld_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMLD_MAX_INTENSITY,
+	.dft_brightness	= PALMLD_MAX_INTENSITY,
+	.pwm_period_ns	= PALMLD_PERIOD_NS,
+	.init		= palmld_backlight_init,
+	.notify		= palmld_backlight_notify,
+	.exit		= palmld_backlight_exit,
+};
+
+static struct platform_device palmld_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmld_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmld_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmld_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+}
+
+static void palmld_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmld_ficp_platform_data = {
+	.startup		= palmld_irda_startup,
+	.shutdown		= palmld_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmld_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+struct gpio_led gpio_leds[] = {
+{
+	.name			= "palmld:green:led",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
+}, {
+	.name			= "palmld:amber:led",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
+},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmld_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	}
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
+	if (ret)
+		goto err3;
+
+	return 0;
+
+err3:
+	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+err2:
+	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmld_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static int palmld_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static char *palmld_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmld_is_ac_online,
+	.is_usb_online   = palmld_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmld_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmld_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMLD_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMLD_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmld_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmld_lcd_screen = {
+	.modes		= palmld_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmld_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmld_pxa_keys,
+#endif
+	&palmld_backlight,
+	&palmld_leds,
+	&power_supply,
+};
+
+static struct map_desc palmld_io_desc[] __initdata = {
+{
+	.virtual	= PALMLD_IDE_VIRT,
+	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
+	.length		= PALMLD_IDE_SIZE,
+	.type		= MT_DEVICE
+},
+{
+	.virtual	= PALMLD_USB_VIRT,
+	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
+	.length		= PALMLD_USB_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmld_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
+}
+
+static void __init palmld_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+
+	set_pxa_fb_info(&palmld_lcd_screen);
+	pxa_set_mci_info(&palmld_mci_platform_data);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmld_ficp_platform_data);
+	pxa_set_keypad_info(&palmld_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMLD, "Palm LifeDrive")
+	.phys_io	= PALMLD_PHYS_IO_START,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= palmld_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmld_init
+MACHINE_END
-- 
cgit v1.2.3


From 28c88046d0974e50859d80c885f61d67cb083d02 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Wed, 3 Dec 2008 09:38:10 +0200
Subject: [ARM] pxa/em-x270: updates for 2.6.29

The patch includes the following updates to EM-X270:
- Added DA9030 support
- Added NOR flash support
- Added QCI with mt9m112 sensor support
- Updated LCD support

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 371 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 356 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f5ed8038ede..1aaae97de7d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -16,9 +16,16 @@
 #include <linux/rtc-v3020.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -31,6 +38,9 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
@@ -44,6 +54,9 @@
 #define GPIO11_NAND_CS	(11)
 #define GPIO56_NAND_RB	(56)
 
+/* Miscelaneous GPIOs */
+#define GPIO93_CAM_RESET	(93)
+
 static unsigned long em_x270_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
@@ -154,6 +167,7 @@ static unsigned long em_x270_pin_config[] = {
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
@@ -369,6 +383,61 @@ static void __init em_x270_init_nand(void)
 static inline void em_x270_init_nand(void) {}
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Environment",
+		.offset =	0x00050000,
+		.size =		0x00010000,
+	}, {
+		.name =		"Reserved",
+		.offset =	0x00060000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Splashscreen",
+		.offset =	0x000b0000,
+		.size =		0x00050000,
+	}
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+	[0] = {
+		.width = 2,
+		.parts = em_x270_nor_parts,
+		.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+	},
+};
+
+static struct resource em_x270_nor_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_1M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &em_x270_nor_flash_resource,
+	.dev		= {
+		.platform_data	= &em_x270_nor_data,
+	},
+};
+
+static void __init em_x270_init_nor(void)
+{
+	platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
@@ -442,27 +511,43 @@ static void __init em_x270_init_mmc(void)
 static inline void em_x270_init_mmc(void) {}
 #endif
 
-/* LCD 480x640 */
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_mode = {
-	.pixclock	= 50000,
-	.bpp		= 16,
-	.xres		= 480,
-	.yres		= 640,
-	.hsync_len	= 8,
-	.vsync_len	= 2,
-	.left_margin	= 8,
-	.upper_margin	= 0,
-	.right_margin	= 24,
-	.lower_margin	= 4,
-	.cmap_greyscale	= 0,
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38250,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.sync		= 0,
+	},
+	[1] = {
+		.pixclock       = 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.sync		= 0,
+	},
 };
 
 static struct pxafb_mach_info em_x270_lcd = {
-	.modes		= &em_x270_lcd_mode,
-	.num_modes	= 1,
+	.modes		= em_x270_lcd_modes,
+	.num_modes	= 2,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
+
 static void __init em_x270_init_lcd(void)
 {
 	set_pxa_fb_info(&em_x270_lcd);
@@ -471,6 +556,40 @@ static void __init em_x270_init_lcd(void)
 static inline void em_x270_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+	.num_chipselect	= 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+	.rx_threshold = 1,
+	.tx_threshold = 1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+	{
+		.modalias = "tdo24m",
+		.max_speed_hz = 1000000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &em_x270_tdo24m_chip,
+		.platform_data = &em_x270_tdo24m_pdata,
+	},
+};
+
+static void __init em_x270_init_spi(void)
+{
+	pxa2xx_set_spi_info(1, &em_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
 static void __init em_x270_init_ac97(void)
 {
@@ -535,19 +654,241 @@ static void __init em_x270_init_gpio_keys(void)
 static inline void em_x270_init_gpio_keys(void) {}
 #endif
 
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	if (ret)
+		return ret;
+
+	gpio_direction_output(GPIO93_CAM_RESET, 0);
+
+	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+	if (em_x270_camera_ldo == NULL) {
+		gpio_free(GPIO93_CAM_RESET);
+		return -ENODEV;
+	}
+
+	ret = regulator_enable(em_x270_camera_ldo);
+	if (ret) {
+		regulator_put(em_x270_camera_ldo);
+		gpio_free(GPIO93_CAM_RESET);
+		return ret;
+	}
+
+	gpio_set_value(GPIO93_CAM_RESET, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+	.init	= em_x270_sensor_init,
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+	int ret;
+	int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+	if (on == is_on)
+		return 0;
+
+	gpio_set_value(GPIO93_CAM_RESET, !on);
+
+	if (on)
+		ret = regulator_enable(em_x270_camera_ldo);
+	else
+		ret = regulator_disable(em_x270_camera_ldo);
+
+	if (ret)
+		return ret;
+
+	gpio_set_value(GPIO93_CAM_RESET, on);
+
+	return 0;
+}
+
+static struct soc_camera_link iclink = {
+	.bus_id	= 0,
+	.power = em_x270_sensor_power,
+};
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+	{
+		I2C_BOARD_INFO("mt9m111", 0x48),
+		.platform_data = &iclink,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void  __init em_x270_init_camera(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
+	pxa_set_camera_info(&em_x270_camera_platform_data);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+/* DA9030 related initializations */
+static struct regulator_consumer_supply ldo3_consumers[] = {
+	{
+		.dev = NULL,
+		.supply = "vcc gps",
+	},
+};
+
+static struct regulator_consumer_supply ldo5_consumers[] = {
+	{
+		.dev = NULL,
+		.supply = "vcc cam",
+	},
+};
+
+static struct regulator_consumer_supply ldo12_consumers[] = {
+	{
+		.dev = NULL,
+		.supply = "vcc usb",
+	},
+};
+
+static struct regulator_consumer_supply ldo19_consumers[] = {
+	{
+		.dev = NULL,
+		.supply = "vcc gprs",
+	},
+};
+
+static struct regulator_init_data ldo3_data = {
+	.constraints = {
+		.min_uV = 3200000,
+		.max_uV = 3200000,
+		.state_mem = {
+			.enabled = 0,
+		},
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo3_consumers),
+	.consumer_supplies = ldo3_consumers,
+};
+
+static struct regulator_init_data ldo5_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.state_mem = {
+			.enabled = 0,
+		},
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
+	.consumer_supplies = ldo5_consumers,
+};
+
+static struct regulator_init_data ldo12_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.state_mem = {
+			.enabled = 0,
+		},
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo12_consumers),
+	.consumer_supplies = ldo12_consumers,
+};
+
+static struct regulator_init_data ldo19_data = {
+	.constraints = {
+		.min_uV = 3200000,
+		.max_uV = 3200000,
+		.state_mem = {
+			.enabled = 0,
+		},
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo19_consumers),
+	.consumer_supplies = ldo19_consumers,
+};
+
+struct led_info em_x270_led_info = {
+	.name = "em-x270:orange",
+	.default_trigger = "battery-charging-or-full",
+};
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+	{
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &ldo3_data,
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &ldo5_data,
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &ldo12_data,
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &ldo19_data,
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_PC,
+		.platform_data = &em_x270_led_info,
+	}, {
+		.name = "da903x-backlight",
+		.id = DA9030_ID_WLED,
+	}
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+	.subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+	pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
 static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
+	em_x270_init_da9030();
 	em_x270_init_dm9000();
 	em_x270_init_rtc();
 	em_x270_init_nand();
+	em_x270_init_nor();
 	em_x270_init_lcd();
 	em_x270_init_mmc();
 	em_x270_init_ohci();
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
+	em_x270_init_camera();
+	em_x270_init_spi();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
-- 
cgit v1.2.3


From efd0ef4e57ec9ae12d013ce91ccef32589e95080 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Wed, 3 Dec 2008 09:38:07 +0200
Subject: [ARM] pxa: update xm_x2xx_defconfig

Update xm_x2xx_defconfig to allow use of EM-X270 updated features

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/xm_x2xx_defconfig | 378 +++++++++++++++++++++++++------------
 1 file changed, 262 insertions(+), 116 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig
index f891364dece..07c3c93754b 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct  5 11:05:36 2008
+# Linux kernel version: 2.6.28-rc6
+# Wed Dec  3 09:26:16 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,7 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -80,7 +79,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -89,15 +90,9 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -129,6 +124,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -169,8 +165,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -232,6 +227,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
 
 #
 # Bus support
@@ -287,14 +283,14 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -327,6 +323,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -389,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -434,11 +433,10 @@ CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBTUART is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
@@ -522,7 +520,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PXA2XX=y
 # CONFIG_MTD_ARM_INTEGRATOR is not set
@@ -535,6 +533,8 @@ CONFIG_MTD_PXA2XX=y
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -756,6 +756,7 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
 # CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -763,6 +764,9 @@ CONFIG_DM9000_DEBUGLEVEL=1
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -775,7 +779,7 @@ CONFIG_NET_PCI=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
-CONFIG_8139TOO=y
+CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
@@ -787,6 +791,7 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -879,6 +884,7 @@ CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -1022,12 +1028,31 @@ CONFIG_I2C_PXA=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -1043,17 +1068,19 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1069,6 +1096,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -1077,13 +1107,113 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -1095,6 +1225,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1128,6 +1259,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -1144,7 +1276,17 @@ CONFIG_FB_MBX=m
 # CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=m
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_DA903X=m
 
 #
 # Display device support
@@ -1167,6 +1309,7 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1182,82 +1325,23 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
@@ -1269,9 +1353,36 @@ CONFIG_HID_DEBUG=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1291,6 +1402,8 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1306,6 +1419,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
 
 #
@@ -1314,13 +1429,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1355,6 +1471,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1371,13 +1488,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1385,11 +1504,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
 # CONFIG_MMC_SDRICOH_CS is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1400,9 +1520,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 # CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
+CONFIG_LEDS_GPIO=m
 # CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
 
 #
 # LED Triggers
@@ -1410,6 +1530,7 @@ CONFIG_LEDS_CM_X270=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1441,21 +1562,32 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
 
 #
@@ -1463,14 +1595,12 @@ CONFIG_RTC_DRV_V3020=y
 #
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_DA903X=m
 # CONFIG_UIO is not set
 
 #
@@ -1483,12 +1613,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -1520,6 +1651,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1567,6 +1699,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1681,16 +1814,24 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1705,12 +1846,14 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1783,14 +1926,17 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-- 
cgit v1.2.3


From b25a386b9c68ed23c3b2656f44b523e61480218b Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sat, 17 Jan 2009 18:01:04 +0100
Subject: [ARM] pxa/magician: Update defconfig

This is the touched up result of make magician_defconfig in 2.6.29-rc2.
- Enabled USB host and bluetooth: magician has a CSR BlueCore3 connected
  to the PXA27x OHCI internally.
- Made I2C built-in.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/magician_defconfig | 641 ++++++++++++++++++++++++++----------
 1 file changed, 475 insertions(+), 166 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 4d11678584d..7adb09806d4 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Sun Dec 30 13:02:54 2007
+# Linux kernel version: 2.6.29-rc2
+# Sat Jan 17 17:47:17 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -41,16 +42,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -65,31 +65,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -104,7 +114,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
 # CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -114,9 +128,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -130,41 +142,57 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
 # CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
 CONFIG_MACH_MAGICIAN=y
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_PXA_PWM is not set
+CONFIG_PXA_HAVE_BOARD_IRQS=y
 
 #
 # Processor Type
@@ -173,6 +201,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -186,6 +215,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -197,28 +227,33 @@ CONFIG_XSCALE_PMU=y
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -229,9 +264,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
@@ -239,6 +275,7 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -247,6 +284,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -263,6 +301,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -270,21 +310,18 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -316,33 +353,15 @@ CONFIG_IP_PNP=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -353,6 +372,7 @@ CONFIG_NETFILTER=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -390,20 +410,17 @@ CONFIG_IRTTY_SIR=m
 # Dongle support
 #
 # CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
 #
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -417,17 +434,17 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,25 +459,28 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -473,6 +493,7 @@ CONFIG_MTD_BLOCK=m
 #
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -487,6 +508,7 @@ CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -497,9 +519,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PXA2XX is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_SHARP_SL is not set
@@ -522,6 +542,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -531,10 +557,12 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -547,7 +575,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -563,6 +590,20 @@ CONFIG_NETDEVICES=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -612,7 +653,26 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -625,9 +685,11 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -642,6 +704,7 @@ CONFIG_SERIAL_PXA=y
 # CONFIG_SERIAL_PXA_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -649,37 +712,45 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
+CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -688,19 +759,39 @@ CONFIG_I2C_PXA=m
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 CONFIG_W1=y
 
 #
 # 1-wire Bus Masters
 #
+# CONFIG_W1_MASTER_DS2490 is not set
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_DS1WM=y
+# CONFIG_W1_MASTER_GPIO is not set
 
 #
 # 1-wire Slaves
@@ -709,32 +800,56 @@ CONFIG_W1_MASTER_DS1WM=y
 # CONFIG_W1_SLAVE_SMEM is not set
 # CONFIG_W1_SLAVE_DS2433 is not set
 CONFIG_W1_SLAVE_DS2760=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
 CONFIG_BATTERY_DS2760=y
+# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -745,6 +860,7 @@ CONFIG_HTC_PASIC3=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -752,8 +868,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -765,13 +881,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_GENERIC is not set
 
 #
 # Display device support
@@ -802,15 +925,8 @@ CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -824,53 +940,151 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=m
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# ALSA ARM devices
+# Miscellaneous USB options
 #
-# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# System on Chip audio support
+# USB Host Controller Drivers
 #
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
-# SoC Audio support for SuperH
+# USB Device Class drivers
 #
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# Open Sound System
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-# CONFIG_USB_SUPPORT is not set
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -899,6 +1113,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -908,17 +1125,26 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -927,19 +1153,18 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -965,15 +1190,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -997,9 +1220,13 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1007,14 +1234,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1076,6 +1302,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1083,15 +1310,18 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
@@ -1100,17 +1330,41 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1119,55 +1373,110 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
cgit v1.2.3


From 73921ea5b5ccfe0bbe4c1dfcd1a60fdadc7c7d1e Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sat, 17 Jan 2009 18:45:40 +0100
Subject: [ARM] pxa/magician: Enable backlight

Magician uses the generic PWM backlight driver,
so select HAVE_PWM.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/magician_defconfig | 4 +++-
 arch/arm/mach-pxa/Kconfig           | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 7adb09806d4..dde50df09bc 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -4,6 +4,7 @@
 # Sat Jan 17 17:47:17 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
@@ -191,7 +192,7 @@ CONFIG_MACH_MAGICIAN=y
 # CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
+CONFIG_PXA_PWM=y
 CONFIG_PXA_HAVE_BOARD_IRQS=y
 
 #
@@ -895,6 +896,7 @@ CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
 
 #
 # Display device support
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index af5b5b463a2..a2ed2aa731b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -295,6 +295,7 @@ config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
+	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MIOA701
-- 
cgit v1.2.3


From 16c3ea43b8e7b3bf4332f5570263f409e4ca4557 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sat, 17 Jan 2009 18:45:41 +0100
Subject: [ARM] pxa/magician: setup SSP1 pins for audio

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 21b821e1a60..4416ee1dc5d 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -66,6 +66,11 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO31_I2S_SYNC,
 	GPIO113_I2S_SYSCLK,
 
+	/* SSP 1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+
 	/* SSP 2 */
 	GPIO19_SSP2_SCLK,
 	GPIO14_SSP2_SFRM,
-- 
cgit v1.2.3


From dee63169884a528000d6318b1c1c2d0b445953f9 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sat, 17 Jan 2009 18:45:42 +0100
Subject: [ARM] pxa/magician: enable power I2C for max158xx

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4416ee1dc5d..f734d663547 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -748,6 +748,7 @@ static void __init magician_init(void)
 		gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
 		pxa_set_ficp_info(&magician_ficp_info);
 	}
+	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
-- 
cgit v1.2.3


From fcb78d1f615a46509bffd9347b7f36fab4db79df Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sat, 17 Jan 2009 18:45:43 +0100
Subject: [ARM] pxa/magician: Use SZ_64M for physmap resource

Improves readability over the custom #define.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index f734d663547..b952508d5f9 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -693,11 +693,9 @@ static void magician_set_vpp(struct map_info *map, int vpp)
 	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
 }
 
-#define PXA_CS_SIZE		0x04000000
-
 static struct resource strataflash_resource = {
 	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+	.end   = PXA_CS0_PHYS + SZ_64M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
-- 
cgit v1.2.3


From 51c10bbc3d7d700acd25a004d58a51067983acb6 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sat, 17 Jan 2009 18:45:44 +0100
Subject: [ARM] pxa/magician: use named initializers for gpio_keys setup

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 39 ++++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index b952508d5f9..b7aafe6823f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -153,22 +153,31 @@ static struct pxaficp_platform_data magician_ficp_info = {
  * GPIO Keys
  */
 
+#define INIT_KEY(_code, _gpio, _desc)	\
+	{				\
+		.code   = KEY_##_code,	\
+		.gpio   = _gpio,	\
+		.desc   = _desc,	\
+		.type   = EV_KEY,	\
+		.wakeup = 1,		\
+	}
+
 static struct gpio_keys_button magician_button_table[] = {
-	{KEY_POWER,      GPIO0_MAGICIAN_KEY_POWER,      0, "Power button"},
-	{KEY_ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    0, "Hangup button"},
-	{KEY_F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  0, "Contacts button"},
-	{KEY_CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  0, "Calendar button"},
-	{KEY_CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    0, "Camera button"},
-	{KEY_UP,         GPIO93_MAGICIAN_KEY_UP,        0, "Up button"},
-	{KEY_DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      0, "Down button"},
-	{KEY_LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      0, "Left button"},
-	{KEY_RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     0, "Right button"},
-	{KEY_KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     0, "Action button"},
-	{KEY_RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    0, "Record button"},
-	{KEY_VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   0, "Volume up"},
-	{KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
-	{KEY_PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    0, "Phone button"},
-	{KEY_PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  0, "Headset button"},
+	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
+	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
+	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
+	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
+	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
+	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
+	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
+	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
+	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
+	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
+	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
+	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
+	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
+	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
+	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
 };
 
 static struct gpio_keys_platform_data gpio_keys_data = {
-- 
cgit v1.2.3


From 67e68bde02fe783efc2ce2ca31bdb992f5235f8d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 21 Jan 2009 17:26:05 +0900
Subject: x86: update canary handling during switch

Impact: cleanup

In switch_to(), instead of taking offset to irq_stack_union.stack,
make it a proper percpu access using __percpu_arg() and per_cpu_var().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/system.h | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 52eb748a68a..2fcc70bc85f 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -89,13 +89,15 @@ do {									\
 #ifdef CONFIG_CC_STACKPROTECTOR
 #define __switch_canary							  \
 	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
-	"movq %%r8,%%gs:%P[gs_canary]\n\t"
-#define __switch_canary_param						  \
-	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))  \
-	, [gs_canary] "i" (offsetof(union irq_stack_union, stack_canary))
+	"movq %%r8,"__percpu_arg([gs_canary])"\n\t"
+#define __switch_canary_oparam						  \
+	, [gs_canary] "=m" (per_cpu_var(irq_stack_union.stack_canary))
+#define __switch_canary_iparam						  \
+	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
 #else	/* CC_STACKPROTECTOR */
 #define __switch_canary
-#define __switch_canary_param
+#define __switch_canary_oparam
+#define __switch_canary_iparam
 #endif	/* CC_STACKPROTECTOR */
 
 /* Save restore flags to clear handle leaking NT */
@@ -114,13 +116,14 @@ do {									\
 	     "jc   ret_from_fork\n\t"					  \
 	     RESTORE_CONTEXT						  \
 	     : "=a" (last)					  	  \
+	       __switch_canary_oparam					  \
 	     : [next] "S" (next), [prev] "D" (prev),			  \
 	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
 	       [tif_fork] "i" (TIF_FORK),			  	  \
 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
 	       [current_task] "m" (per_cpu_var(current_task))		  \
-	       __switch_canary_param					  \
+	       __switch_canary_iparam					  \
 	     : "memory", "cc" __EXTRA_CLOBBER)
 #endif
 
-- 
cgit v1.2.3


From 06deef892c7327992434917fb6592c233430803d Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Wed, 21 Jan 2009 17:26:05 +0900
Subject: x86: clean up gdt_page definition

Impact: cleanup && more compact percpu area layout with future changes

Move 64-bit GDT to page-aligned section and clean up comment
formatting.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/cpu/common.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 3887fcf6e51..a8f0dedcb0c 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -63,23 +63,23 @@ cpumask_t cpu_sibling_setup_map;
 
 static struct cpu_dev *this_cpu __cpuinitdata;
 
+DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 #ifdef CONFIG_X86_64
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types  kkeil 2000/10/28
- * Also sysret mandates a special GDT layout
- */
-/* The TLS descriptors are currently at a different place compared to i386.
-   Hopefully nobody expects them at a fixed place (Wine?) */
-DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+	/*
+	 * We need valid kernel segments for data and code in long mode too
+	 * IRET will check the segment types  kkeil 2000/10/28
+	 * Also sysret mandates a special GDT layout
+	 *
+	 * The TLS descriptors are currently at a different place compared to i386.
+	 * Hopefully nobody expects them at a fixed place (Wine?)
+	 */
 	[GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
 	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
 	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
 	[GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
 	[GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
 	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
-} };
 #else
-DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
 	[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
 	[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
@@ -112,8 +112,8 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 
 	[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
 	[GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
-} };
 #endif
+} };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
 #ifdef CONFIG_X86_32
-- 
cgit v1.2.3


From 299e26992a737804e13e74fdb97cdab470ed19ac Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Wed, 21 Jan 2009 17:26:05 +0900
Subject: x86: fix percpu_write with 64-bit constants

Impact: slightly better code generation for percpu_to_op()

The processor will sign-extend 32-bit immediate values in 64-bit
operations.  Use the 'e' constraint ("32-bit signed integer constant,
or a symbolic reference known to fit that range") for 64-bit constants.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/percpu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index ce980db5e59..0b64af4f13a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -75,7 +75,7 @@ do {							\
 	case 8:						\
 		asm(op "q %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "r" ((T__)val));			\
+		    : "re" ((T__)val));			\
 		break;					\
 	default: __bad_percpu_size();			\
 	}						\
-- 
cgit v1.2.3


From 0dd76d736eeb3e0ef86c5b103b47ae0e15edebad Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Wed, 21 Jan 2009 17:26:05 +0900
Subject: x86: set %fs to __KERNEL_PERCPU unconditionally for x86_32

Impact: cleanup

%fs is currently set to __KERNEL_DS at boot, and conditionally
switched to __KERNEL_PERCPU for secondary cpus.  Instead, initialize
GDT_ENTRY_PERCPU to the same attributes as GDT_ENTRY_KERNEL_DS and
set %fs to __KERNEL_PERCPU unconditionally.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/cpu/common.c | 2 +-
 arch/x86/kernel/head_32.S    | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index a8f0dedcb0c..fbebbcec001 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -111,7 +111,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	[GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } },
 
 	[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
-	[GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
+	[GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } },
 #endif
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index e835b4eea70..24c0e5cd71e 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -429,12 +429,14 @@ is386:	movl $2,%ecx		# set MP
 	ljmp $(__KERNEL_CS),$1f
 1:	movl $(__KERNEL_DS),%eax	# reload all the segment registers
 	movl %eax,%ss			# after changing gdt.
-	movl %eax,%fs			# gets reset once there's real percpu
 
 	movl $(__USER_DS),%eax		# DS/ES contains default USER segment
 	movl %eax,%ds
 	movl %eax,%es
 
+	movl $(__KERNEL_PERCPU), %eax
+	movl %eax,%fs			# set this cpu's percpu
+
 	xorl %eax,%eax			# Clear GS and LDT
 	movl %eax,%gs
 	lldt %ax
@@ -446,8 +448,6 @@ is386:	movl $2,%ecx		# set MP
 	movb $1, ready
 	cmpb $0,%cl		# the first CPU calls start_kernel
 	je   1f
-	movl $(__KERNEL_PERCPU), %eax
-	movl %eax,%fs		# set this cpu's percpu
 	movl (stack_start), %esp
 1:
 #endif /* CONFIG_SMP */
-- 
cgit v1.2.3


From 6826c8ff07b5f95df0473a748a9831707079b940 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Wed, 21 Jan 2009 17:26:06 +0900
Subject: x86: merge mmu_context.h

Impact: cleanup

tj: * changed cpu to unsigned as was done on mmu_context_64.h as cpu
      id is officially unsigned int
    * added missing ';' to 32bit version of deactivate_mm()

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/mmu_context.h    | 63 ++++++++++++++++++++++++++++++++---
 arch/x86/include/asm/mmu_context_32.h | 55 ------------------------------
 arch/x86/include/asm/mmu_context_64.h | 52 -----------------------------
 3 files changed, 59 insertions(+), 111 deletions(-)
 delete mode 100644 arch/x86/include/asm/mmu_context_32.h
 delete mode 100644 arch/x86/include/asm/mmu_context_64.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 8aeeb3fd73d..52948df9cd1 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -21,11 +21,54 @@ static inline void paravirt_activate_mm(struct mm_struct *prev,
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void destroy_context(struct mm_struct *mm);
 
-#ifdef CONFIG_X86_32
-# include "mmu_context_32.h"
-#else
-# include "mmu_context_64.h"
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
+		percpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		/* stop flush ipis for the previous mm */
+		cpu_clear(cpu, prev->cpu_vm_mask);
+#ifdef CONFIG_SMP
+		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		percpu_write(cpu_tlbstate.active_mm, next);
 #endif
+		cpu_set(cpu, next->cpu_vm_mask);
+
+		/* Re-load page tables */
+		load_cr3(next->pgd);
+
+		/*
+		 * load the LDT, if the LDT is different:
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_LDT_nolock(&next->context);
+	}
+#ifdef CONFIG_SMP
+	else {
+		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
+
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+			/* We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 */
+			load_cr3(next->pgd);
+			load_LDT_nolock(&next->context);
+		}
+	}
+#endif
+}
 
 #define activate_mm(prev, next)			\
 do {						\
@@ -33,5 +76,17 @@ do {						\
 	switch_mm((prev), (next), NULL);	\
 } while (0);
 
+#ifdef CONFIG_X86_32
+#define deactivate_mm(tsk, mm)			\
+do {						\
+	loadsegment(gs, 0);			\
+} while (0)
+#else
+#define deactivate_mm(tsk, mm)			\
+do {						\
+	load_gs_index(0);			\
+	loadsegment(fs, 0);			\
+} while (0)
+#endif
 
 #endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/include/asm/mmu_context_32.h b/arch/x86/include/asm/mmu_context_32.h
deleted file mode 100644
index 08b53454f83..00000000000
--- a/arch/x86/include/asm/mmu_context_32.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _ASM_X86_MMU_CONTEXT_32_H
-#define _ASM_X86_MMU_CONTEXT_32_H
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-#ifdef CONFIG_SMP
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
-		percpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
-#endif
-}
-
-static inline void switch_mm(struct mm_struct *prev,
-			     struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	int cpu = smp_processor_id();
-
-	if (likely(prev != next)) {
-		/* stop flush ipis for the previous mm */
-		cpu_clear(cpu, prev->cpu_vm_mask);
-#ifdef CONFIG_SMP
-		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		percpu_write(cpu_tlbstate.active_mm, next);
-#endif
-		cpu_set(cpu, next->cpu_vm_mask);
-
-		/* Re-load page tables */
-		load_cr3(next->pgd);
-
-		/*
-		 * load the LDT, if the LDT is different:
-		 */
-		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_LDT_nolock(&next->context);
-	}
-#ifdef CONFIG_SMP
-	else {
-		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
-
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
-			/* We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload %cr3.
-			 */
-			load_cr3(next->pgd);
-			load_LDT_nolock(&next->context);
-		}
-	}
-#endif
-}
-
-#define deactivate_mm(tsk, mm)			\
-	asm("movl %0,%%gs": :"r" (0));
-
-#endif /* _ASM_X86_MMU_CONTEXT_32_H */
diff --git a/arch/x86/include/asm/mmu_context_64.h b/arch/x86/include/asm/mmu_context_64.h
deleted file mode 100644
index c4572505ab3..00000000000
--- a/arch/x86/include/asm/mmu_context_64.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ASM_X86_MMU_CONTEXT_64_H
-#define _ASM_X86_MMU_CONTEXT_64_H
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-#ifdef CONFIG_SMP
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
-		percpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
-#endif
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned cpu = smp_processor_id();
-	if (likely(prev != next)) {
-		/* stop flush ipis for the previous mm */
-		cpu_clear(cpu, prev->cpu_vm_mask);
-#ifdef CONFIG_SMP
-		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		percpu_write(cpu_tlbstate.active_mm, next);
-#endif
-		cpu_set(cpu, next->cpu_vm_mask);
-		load_cr3(next->pgd);
-
-		if (unlikely(next->context.ldt != prev->context.ldt))
-			load_LDT_nolock(&next->context);
-	}
-#ifdef CONFIG_SMP
-	else {
-		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
-
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
-			/* We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload CR3
-			 * to make sure to use no freed page tables.
-			 */
-			load_cr3(next->pgd);
-			load_LDT_nolock(&next->context);
-		}
-	}
-#endif
-}
-
-#define deactivate_mm(tsk, mm)			\
-do {						\
-	load_gs_index(0);			\
-	asm volatile("movl %0,%%fs"::"r"(0));	\
-} while (0)
-
-#endif /* _ASM_X86_MMU_CONTEXT_64_H */
-- 
cgit v1.2.3


From d650a5148593b65a3c3f9a344f46b91b7dfe7713 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Wed, 21 Jan 2009 17:26:06 +0900
Subject: x86: merge irq_regs.h

Impact: cleanup, better irq_regs code generation for x86_64

Make 64-bit use the same optimizations as 32-bit.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/irq_regs.h    | 36 +++++++++++++++++++++++++++++++-----
 arch/x86/include/asm/irq_regs_32.h | 31 -------------------------------
 arch/x86/include/asm/irq_regs_64.h |  1 -
 arch/x86/kernel/irq_64.c           |  3 +++
 4 files changed, 34 insertions(+), 37 deletions(-)
 delete mode 100644 arch/x86/include/asm/irq_regs_32.h
 delete mode 100644 arch/x86/include/asm/irq_regs_64.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_regs.h b/arch/x86/include/asm/irq_regs.h
index 89c898ab298..77843225b7e 100644
--- a/arch/x86/include/asm/irq_regs.h
+++ b/arch/x86/include/asm/irq_regs.h
@@ -1,5 +1,31 @@
-#ifdef CONFIG_X86_32
-# include "irq_regs_32.h"
-#else
-# include "irq_regs_64.h"
-#endif
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack, stored in the per-cpu area.
+ *
+ * Jeremy Fitzhardinge <jeremy@goop.org>
+ */
+#ifndef _ASM_X86_IRQ_REGS_H
+#define _ASM_X86_IRQ_REGS_H
+
+#include <asm/percpu.h>
+
+#define ARCH_HAS_OWN_IRQ_REGS
+
+DECLARE_PER_CPU(struct pt_regs *, irq_regs);
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return percpu_read(irq_regs);
+}
+
+static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
+{
+	struct pt_regs *old_regs;
+
+	old_regs = get_irq_regs();
+	percpu_write(irq_regs, new_regs);
+
+	return old_regs;
+}
+
+#endif /* _ASM_X86_IRQ_REGS_32_H */
diff --git a/arch/x86/include/asm/irq_regs_32.h b/arch/x86/include/asm/irq_regs_32.h
deleted file mode 100644
index d7ed33ee94e..00000000000
--- a/arch/x86/include/asm/irq_regs_32.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Per-cpu current frame pointer - the location of the last exception frame on
- * the stack, stored in the per-cpu area.
- *
- * Jeremy Fitzhardinge <jeremy@goop.org>
- */
-#ifndef _ASM_X86_IRQ_REGS_32_H
-#define _ASM_X86_IRQ_REGS_32_H
-
-#include <asm/percpu.h>
-
-#define ARCH_HAS_OWN_IRQ_REGS
-
-DECLARE_PER_CPU(struct pt_regs *, irq_regs);
-
-static inline struct pt_regs *get_irq_regs(void)
-{
-	return percpu_read(irq_regs);
-}
-
-static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
-{
-	struct pt_regs *old_regs;
-
-	old_regs = get_irq_regs();
-	percpu_write(irq_regs, new_regs);
-
-	return old_regs;
-}
-
-#endif /* _ASM_X86_IRQ_REGS_32_H */
diff --git a/arch/x86/include/asm/irq_regs_64.h b/arch/x86/include/asm/irq_regs_64.h
deleted file mode 100644
index 3dd9c0b7027..00000000000
--- a/arch/x86/include/asm/irq_regs_64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 1db05247b47..0b254de8408 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -22,6 +22,9 @@
 DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 EXPORT_PER_CPU_SYMBOL(irq_stat);
 
+DEFINE_PER_CPU(struct pt_regs *, irq_regs);
+EXPORT_PER_CPU_SYMBOL(irq_regs);
+
 /*
  * Probabilistic stack overflow check:
  *
-- 
cgit v1.2.3


From bdbcdd48883940bbd8d17eb01172d58a261a413a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 21 Jan 2009 17:26:06 +0900
Subject: x86: uv cleanup

Impact: cleanup

Make the following uv related cleanups.

* collect visible uv related definitions and interfaces into uv/uv.h
  and use it.  this cleans up the messy situation where on 64bit, uv
  is defined properly, on 32bit generic it's dummy and on the rest
  undefined.  after this clean up, uv is defined on 64 and dummy on
  32.

* update uv_flush_tlb_others() such that it takes cpumask of
  to-be-flushed cpus as argument, instead of that minus self, and
  returns yet-to-be-flushed cpumask, instead of modifying the passed
  in parameter.  this interface change will ease dummy implementation
  of uv_flush_tlb_others() and makes uv tlb flush related stuff
  defined in tlb_uv proper.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/genapic_32.h |  7 ----
 arch/x86/include/asm/genapic_64.h |  6 ----
 arch/x86/include/asm/uv/uv.h      | 33 +++++++++++++++++++
 arch/x86/include/asm/uv/uv_bau.h  |  2 --
 arch/x86/kernel/cpu/common.c      |  1 +
 arch/x86/kernel/genx2apic_uv_x.c  |  1 +
 arch/x86/kernel/smpboot.c         |  1 +
 arch/x86/kernel/tlb_64.c          | 18 ++++-------
 arch/x86/kernel/tlb_uv.c          | 68 +++++++++++++++++++++++----------------
 9 files changed, 83 insertions(+), 54 deletions(-)
 create mode 100644 arch/x86/include/asm/uv/uv.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h
index 2c05b737ee2..4334502d366 100644
--- a/arch/x86/include/asm/genapic_32.h
+++ b/arch/x86/include/asm/genapic_32.h
@@ -138,11 +138,4 @@ struct genapic {
 extern struct genapic *genapic;
 extern void es7000_update_genapic_to_cluster(void);
 
-enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
-#define get_uv_system_type()		UV_NONE
-#define is_uv_system()			0
-#define uv_wakeup_secondary(a, b)	1
-#define uv_system_init()		do {} while (0)
-
-
 #endif /* _ASM_X86_GENAPIC_32_H */
diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h
index adf32fb56aa..7bb092c5905 100644
--- a/arch/x86/include/asm/genapic_64.h
+++ b/arch/x86/include/asm/genapic_64.h
@@ -51,15 +51,9 @@ extern struct genapic apic_x2apic_phys;
 extern int acpi_madt_oem_check(char *, char *);
 
 extern void apic_send_IPI_self(int vector);
-enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
-extern enum uv_system_type get_uv_system_type(void);
-extern int is_uv_system(void);
 
 extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
-extern void uv_cpu_init(void);
-extern void uv_system_init(void);
-extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
 
 extern void setup_apic_routing(void);
 
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
new file mode 100644
index 00000000000..dce5fe35013
--- /dev/null
+++ b/arch/x86/include/asm/uv/uv.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_UV_UV_H
+#define _ASM_X86_UV_UV_H
+
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+
+#ifdef CONFIG_X86_64
+
+extern enum uv_system_type get_uv_system_type(void);
+extern int is_uv_system(void);
+extern void uv_cpu_init(void);
+extern void uv_system_init(void);
+extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
+extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
+						 struct mm_struct *mm,
+						 unsigned long va,
+						 unsigned int cpu);
+
+#else	/* X86_64 */
+
+static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
+static inline int is_uv_system(void)	{ return 0; }
+static inline void uv_cpu_init(void)	{ }
+static inline void uv_system_init(void)	{ }
+static inline int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
+{ return 1; }
+static inline const struct cpumask *
+uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm,
+		    unsigned long va, unsigned int cpu)
+{ return cpumask; }
+
+#endif	/* X86_64 */
+
+#endif	/* _ASM_X86_UV_UV_H */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 74e6393bfdd..9b0e61bf7a8 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -325,8 +325,6 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
 #define cpubit_isset(cpu, bau_local_cpumask) \
 	test_bit((cpu), (bau_local_cpumask).bits)
 
-extern int uv_flush_tlb_others(struct cpumask *,
-			       struct mm_struct *, unsigned long);
 extern void uv_bau_message_intr1(void);
 extern void uv_bau_timeout_intr1(void);
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index fbebbcec001..99904f288d6 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -28,6 +28,7 @@
 #include <asm/apic.h>
 #include <mach_apic.h>
 #include <asm/genapic.h>
+#include <asm/uv/uv.h>
 #endif
 
 #include <asm/pgtable.h>
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index b193e082f6c..bfe36249145 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -25,6 +25,7 @@
 #include <asm/ipi.h>
 #include <asm/genapic.h>
 #include <asm/pgtable.h>
+#include <asm/uv/uv.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/bios.h>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 869b98840fd..def770b57b5 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -62,6 +62,7 @@
 #include <asm/vmi.h>
 #include <asm/genapic.h>
 #include <asm/setup.h>
+#include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
 #include <mach_apic.h>
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index e64a32c4882..b8bed841ad6 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -15,8 +15,7 @@
 #include <asm/proto.h>
 #include <asm/apicdef.h>
 #include <asm/idle.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/uv_bau.h>
+#include <asm/uv/uv.h>
 
 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
 			= { &init_mm, 0, };
@@ -206,16 +205,13 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 			     struct mm_struct *mm, unsigned long va)
 {
 	if (is_uv_system()) {
-		/* FIXME: could be an percpu_alloc'd thing */
-		static DEFINE_PER_CPU(cpumask_t, flush_tlb_mask);
-		struct cpumask *after_uv_flush = &get_cpu_var(flush_tlb_mask);
+		unsigned int cpu;
 
-		cpumask_andnot(after_uv_flush, cpumask,
-			       cpumask_of(smp_processor_id()));
-		if (!uv_flush_tlb_others(after_uv_flush, mm, va))
-			flush_tlb_others_ipi(after_uv_flush, mm, va);
-
-		put_cpu_var(flush_tlb_uv_cpumask);
+		cpu = get_cpu();
+		cpumask = uv_flush_tlb_others(cpumask, mm, va, cpu);
+		if (cpumask)
+			flush_tlb_others_ipi(cpumask, mm, va);
+		put_cpu();
 		return;
 	}
 	flush_tlb_others_ipi(cpumask, mm, va);
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 690dcf1a27d..aae15dd7260 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 
 #include <asm/mmu_context.h>
+#include <asm/uv/uv.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_bau.h>
@@ -209,14 +210,15 @@ static int uv_wait_completion(struct bau_desc *bau_desc,
  *
  * Send a broadcast and wait for a broadcast message to complete.
  *
- * The cpumaskp mask contains the cpus the broadcast was sent to.
+ * The flush_mask contains the cpus the broadcast was sent to.
  *
- * Returns 1 if all remote flushing was done. The mask is zeroed.
- * Returns 0 if some remote flushing remains to be done. The mask will have
- * some bits still set.
+ * Returns NULL if all remote flushing was done. The mask is zeroed.
+ * Returns @flush_mask if some remote flushing remains to be done. The
+ * mask will have some bits still set.
  */
-int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
-			   struct cpumask *cpumaskp)
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+					     struct bau_desc *bau_desc,
+					     struct cpumask *flush_mask)
 {
 	int completion_status = 0;
 	int right_shift;
@@ -263,59 +265,69 @@ int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc,
 	 * Success, so clear the remote cpu's from the mask so we don't
 	 * use the IPI method of shootdown on them.
 	 */
-	for_each_cpu(bit, cpumaskp) {
+	for_each_cpu(bit, flush_mask) {
 		blade = uv_cpu_to_blade_id(bit);
 		if (blade == this_blade)
 			continue;
-		cpumask_clear_cpu(bit, cpumaskp);
+		cpumask_clear_cpu(bit, flush_mask);
 	}
-	if (!cpumask_empty(cpumaskp))
-		return 0;
-	return 1;
+	if (!cpumask_empty(flush_mask))
+		return flush_mask;
+	return NULL;
 }
 
 /**
  * uv_flush_tlb_others - globally purge translation cache of a virtual
  * address or all TLB's
- * @cpumaskp: mask of all cpu's in which the address is to be removed
+ * @cpumask: mask of all cpu's in which the address is to be removed
  * @mm: mm_struct containing virtual address range
  * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu)
+ * @cpu: the current cpu
  *
  * This is the entry point for initiating any UV global TLB shootdown.
  *
  * Purges the translation caches of all specified processors of the given
  * virtual address, or purges all TLB's on specified processors.
  *
- * The caller has derived the cpumaskp from the mm_struct and has subtracted
- * the local cpu from the mask.  This function is called only if there
- * are bits set in the mask. (e.g. flush_tlb_page())
+ * The caller has derived the cpumask from the mm_struct.  This function
+ * is called only if there are bits set in the mask. (e.g. flush_tlb_page())
  *
- * The cpumaskp is converted into a nodemask of the nodes containing
+ * The cpumask is converted into a nodemask of the nodes containing
  * the cpus.
  *
- * Returns 1 if all remote flushing was done.
- * Returns 0 if some remote flushing remains to be done.
+ * Note that this function should be called with preemption disabled.
+ *
+ * Returns NULL if all remote flushing was done.
+ * Returns pointer to cpumask if some remote flushing remains to be
+ * done.  The returned pointer is valid till preemption is re-enabled.
  */
-int uv_flush_tlb_others(struct cpumask *cpumaskp, struct mm_struct *mm,
-			unsigned long va)
+const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
+					  struct mm_struct *mm,
+					  unsigned long va, unsigned int cpu)
 {
+	static DEFINE_PER_CPU(cpumask_t, flush_tlb_mask);
+	struct cpumask *flush_mask = &__get_cpu_var(flush_tlb_mask);
 	int i;
 	int bit;
 	int blade;
-	int cpu;
+	int uv_cpu;
 	int this_blade;
 	int locals = 0;
 	struct bau_desc *bau_desc;
 
-	cpu = uv_blade_processor_id();
+	WARN_ON(!in_atomic());
+
+	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
+
+	uv_cpu = uv_blade_processor_id();
 	this_blade = uv_numa_blade_id();
 	bau_desc = __get_cpu_var(bau_control).descriptor_base;
-	bau_desc += UV_ITEMS_PER_DESCRIPTOR * cpu;
+	bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
 
 	bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
 
 	i = 0;
-	for_each_cpu(bit, cpumaskp) {
+	for_each_cpu(bit, flush_mask) {
 		blade = uv_cpu_to_blade_id(bit);
 		BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
 		if (blade == this_blade) {
@@ -330,17 +342,17 @@ int uv_flush_tlb_others(struct cpumask *cpumaskp, struct mm_struct *mm,
 		 * no off_node flushing; return status for local node
 		 */
 		if (locals)
-			return 0;
+			return flush_mask;
 		else
-			return 1;
+			return NULL;
 	}
 	__get_cpu_var(ptcstats).requestor++;
 	__get_cpu_var(ptcstats).ntargeted += i;
 
 	bau_desc->payload.address = va;
-	bau_desc->payload.sending_cpu = smp_processor_id();
+	bau_desc->payload.sending_cpu = cpu;
 
-	return uv_flush_send_and_wait(cpu, this_blade, bau_desc, cpumaskp);
+	return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
 }
 
 /*
-- 
cgit v1.2.3


From 6dd01bedee6c3191643db303a1dc530bad56ec55 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 21 Jan 2009 17:26:06 +0900
Subject: x86: prepare for tlb merge

Impact: clean up, ipi vector number reordering for x86_32

Make the following changes to prepare for tlb merge.

* reorder x86_32 ip vectors

* adjust tlb_32.c and tlb_64.c such that their logics coincide exactly
	- on spurious invalidate ipi, tlb_32 acks the irq
	- tlb_64 now has proper memory barriers around clearing
          flush_cpumask (no change in generated code)

* unexport flush_tlb_page from tlb_32.c, there's no user

* use unsigned int for cpu id

* drop unnecessary includes from tlb_64.c

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/irq_vectors.h | 33 ++++++++++++++++-----------------
 arch/x86/kernel/tlb_32.c           | 10 +++++-----
 arch/x86/kernel/tlb_64.c           | 18 +++++++-----------
 3 files changed, 28 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index a16a2ab2b42..4ee8f800504 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -49,31 +49,30 @@
  *  some of the following vectors are 'rare', they are merged
  *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
  *  TLB, reschedule and local APIC vectors are performance-critical.
- *
- *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
  */
 #ifdef CONFIG_X86_32
 
 # define SPURIOUS_APIC_VECTOR		0xff
 # define ERROR_APIC_VECTOR		0xfe
-# define INVALIDATE_TLB_VECTOR		0xfd
-# define RESCHEDULE_VECTOR		0xfc
-# define CALL_FUNCTION_VECTOR		0xfb
-# define CALL_FUNCTION_SINGLE_VECTOR	0xfa
-# define THERMAL_APIC_VECTOR		0xf0
+# define RESCHEDULE_VECTOR		0xfd
+# define CALL_FUNCTION_VECTOR		0xfc
+# define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+# define THERMAL_APIC_VECTOR		0xfa
+/* 0xf1 - 0xf9 : free */
+# define INVALIDATE_TLB_VECTOR		0xf0
 
 #else
 
-#define SPURIOUS_APIC_VECTOR		0xff
-#define ERROR_APIC_VECTOR		0xfe
-#define RESCHEDULE_VECTOR		0xfd
-#define CALL_FUNCTION_VECTOR		0xfc
-#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
-#define THERMAL_APIC_VECTOR		0xfa
-#define THRESHOLD_APIC_VECTOR		0xf9
-#define UV_BAU_MESSAGE			0xf8
-#define INVALIDATE_TLB_VECTOR_END	0xf7
-#define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
+# define SPURIOUS_APIC_VECTOR		0xff
+# define ERROR_APIC_VECTOR		0xfe
+# define RESCHEDULE_VECTOR		0xfd
+# define CALL_FUNCTION_VECTOR		0xfc
+# define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+# define THERMAL_APIC_VECTOR		0xfa
+# define THRESHOLD_APIC_VECTOR		0xf9
+# define UV_BAU_MESSAGE			0xf8
+# define INVALIDATE_TLB_VECTOR_END	0xf7
+# define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
 
 #define NUM_INVALIDATE_TLB_VECTORS	8
 
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index abf0808d6fc..93fcb05c7d4 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -84,13 +84,15 @@ EXPORT_SYMBOL_GPL(leave_mm);
  *
  * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
  * 2) Leave the mm if we are in the lazy tlb mode.
+ *
+ * Interrupts are disabled.
  */
 
 void smp_invalidate_interrupt(struct pt_regs *regs)
 {
-	unsigned long cpu;
+	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 
 	if (!cpumask_test_cpu(cpu, flush_cpumask))
 		goto out;
@@ -112,12 +114,11 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
 		} else
 			leave_mm(cpu);
 	}
+out:
 	ack_APIC_irq();
 	smp_mb__before_clear_bit();
 	cpumask_clear_cpu(cpu, flush_cpumask);
 	smp_mb__after_clear_bit();
-out:
-	put_cpu_no_resched();
 	inc_irq_stat(irq_tlb_count);
 }
 
@@ -215,7 +216,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
 	preempt_enable();
 }
-EXPORT_SYMBOL(flush_tlb_page);
 
 static void do_flush_tlb_all(void *info)
 {
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index b8bed841ad6..19ac661422f 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -1,20 +1,14 @@
 #include <linux/init.h>
 
 #include <linux/mm.h>
-#include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/smp.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/apicdef.h>
-#include <asm/idle.h>
+#include <asm/apic.h>
 #include <asm/uv/uv.h>
 
 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
@@ -121,8 +115,8 @@ EXPORT_SYMBOL_GPL(leave_mm);
 
 asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 {
-	int cpu;
-	int sender;
+	unsigned int cpu;
+	unsigned int sender;
 	union smp_flush_state *f;
 
 	cpu = smp_processor_id();
@@ -155,14 +149,16 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
 	}
 out:
 	ack_APIC_irq();
+	smp_mb__before_clear_bit();
 	cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask));
+	smp_mb__after_clear_bit();
 	inc_irq_stat(irq_tlb_count);
 }
 
 static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 				 struct mm_struct *mm, unsigned long va)
 {
-	int sender;
+	unsigned int sender;
 	union smp_flush_state *f;
 
 	/* Caller has disabled preemption */
-- 
cgit v1.2.3


From 02cf94c370e0dc9bf408fe45eb86fe9ad58eaf7f Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 21 Jan 2009 17:26:06 +0900
Subject: x86: make x86_32 use tlb_64.c

Impact: less contention when issuing invalidate IPI, cleanup

Make x86_32 use the same tlb code as 64bit.  The 64bit code uses
multiple IPI vectors for tlb shootdown to reduce contention.  This
patch makes x86_32 allocate the same 8 IPIs as x86_64 and share the
code paths.

Note that the usage of asmlinkage is inconsistent for x86_32 and 64
and calls for further cleanup.  This has been noted with a FIXME
comment in tlb_64.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/irq_vectors.h             |   7 +-
 arch/x86/include/asm/mach-default/entry_arch.h |  18 +-
 arch/x86/kernel/Makefile                       |   2 +-
 arch/x86/kernel/entry_32.S                     |   6 +-
 arch/x86/kernel/irqinit_32.c                   |  11 +-
 arch/x86/kernel/tlb_32.c                       | 239 -------------------------
 arch/x86/kernel/tlb_64.c                       |  12 +-
 7 files changed, 47 insertions(+), 248 deletions(-)
 delete mode 100644 arch/x86/kernel/tlb_32.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 4ee8f800504..9a83a10a5d5 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -58,8 +58,11 @@
 # define CALL_FUNCTION_VECTOR		0xfc
 # define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 # define THERMAL_APIC_VECTOR		0xfa
-/* 0xf1 - 0xf9 : free */
-# define INVALIDATE_TLB_VECTOR		0xf0
+/* 0xf8 - 0xf9 : free */
+# define INVALIDATE_TLB_VECTOR_END	0xf7
+# define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
+
+# define NUM_INVALIDATE_TLB_VECTORS	8
 
 #else
 
diff --git a/arch/x86/include/asm/mach-default/entry_arch.h b/arch/x86/include/asm/mach-default/entry_arch.h
index 6b1add8e31d..6fa399ad1de 100644
--- a/arch/x86/include/asm/mach-default/entry_arch.h
+++ b/arch/x86/include/asm/mach-default/entry_arch.h
@@ -11,10 +11,26 @@
  */
 #ifdef CONFIG_X86_SMP
 BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
-BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
 BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
 BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
 BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+
+BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt1,INVALIDATE_TLB_VECTOR_START+1,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt2,INVALIDATE_TLB_VECTOR_START+2,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt3,INVALIDATE_TLB_VECTOR_START+3,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt4,INVALIDATE_TLB_VECTOR_START+4,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt5,INVALIDATE_TLB_VECTOR_START+5,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt6,INVALIDATE_TLB_VECTOR_START+6,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt7,INVALIDATE_TLB_VECTOR_START+7,
+		 smp_invalidate_interrupt)
 #endif
 
 /*
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index eb074530c7d..a62a15c2222 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -58,7 +58,7 @@ obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_X86_SMP)		+= smp.o
-obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o
+obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb_64.o
 obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 46469029e9d..a0b91aac72a 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -672,7 +672,7 @@ common_interrupt:
 ENDPROC(common_interrupt)
 	CFI_ENDPROC
 
-#define BUILD_INTERRUPT(name, nr)	\
+#define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
 	RING0_INT_FRAME;		\
 	pushl $~(nr);			\
@@ -680,11 +680,13 @@ ENTRY(name)				\
 	SAVE_ALL;			\
 	TRACE_IRQS_OFF			\
 	movl %esp,%eax;			\
-	call smp_##name;		\
+	call fn;			\
 	jmp ret_from_intr;		\
 	CFI_ENDPROC;			\
 ENDPROC(name)
 
+#define BUILD_INTERRUPT(name, nr)	BUILD_INTERRUPT3(name, nr, smp_##name)
+
 /* The include is where all of the SMP etc. interrupts come from */
 #include "entry_arch.h"
 
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index 1507ad4e674..bf629cadec1 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -149,8 +149,15 @@ void __init native_init_IRQ(void)
 	 */
 	alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
 
-	/* IPI for invalidation */
-	alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+	/* IPIs for invalidation */
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+	alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
 
 	/* IPI for generic function call */
 	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
deleted file mode 100644
index 93fcb05c7d4..00000000000
--- a/arch/x86/kernel/tlb_32.c
+++ /dev/null
@@ -1,239 +0,0 @@
-#include <linux/spinlock.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-
-#include <asm/tlbflush.h>
-
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
-			= { &init_mm, 0, };
-
-/* must come after the send_IPI functions above for inlining */
-#include <mach_ipi.h>
-
-/*
- *	Smarter SMP flushing macros.
- *		c/o Linus Torvalds.
- *
- *	These mean you can really definitely utterly forget about
- *	writing to user space from interrupts. (Its not allowed anyway).
- *
- *	Optimizations Manfred Spraul <manfred@colorfullife.com>
- */
-
-static cpumask_var_t flush_cpumask;
-static struct mm_struct *flush_mm;
-static unsigned long flush_va;
-static DEFINE_SPINLOCK(tlbstate_lock);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- *
- * We need to reload %cr3 since the page tables may be going
- * away from under us..
- */
-void leave_mm(int cpu)
-{
-	BUG_ON(percpu_read(cpu_tlbstate.state) == TLBSTATE_OK);
-	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-EXPORT_SYMBOL_GPL(leave_mm);
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- * 	Stop ipi delivery for the old mm. This is not synchronized with
- * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * 	for the wrong mm, and in the worst case we perform a superfluous
- * 	tlb flush.
- * 1a2) set cpu_tlbstate to TLBSTATE_OK
- * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- *	was in lazy tlb mode.
- * 1a3) update cpu_tlbstate[].active_mm
- * 	Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- * 	Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- *	cpu_tlbstate[].active_mm is correct, cpu0 already handles
- *	flush ipis.
- * 1b1) set cpu_tlbstate to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- * 	Atomically set the bit [other cpus will start sending flush ipis],
- * 	and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- *   runs in kernel space, the cpu could load tlb entries for user space
- *   pages.
- *
- * The good news is that cpu_tlbstate is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- *
- * Interrupts are disabled.
- */
-
-void smp_invalidate_interrupt(struct pt_regs *regs)
-{
-	unsigned int cpu;
-
-	cpu = smp_processor_id();
-
-	if (!cpumask_test_cpu(cpu, flush_cpumask))
-		goto out;
-		/*
-		 * This was a BUG() but until someone can quote me the
-		 * line from the intel manual that guarantees an IPI to
-		 * multiple CPUs is retried _only_ on the erroring CPUs
-		 * its staying as a return
-		 *
-		 * BUG();
-		 */
-
-	if (flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
-		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
-			if (flush_va == TLB_FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(flush_va);
-		} else
-			leave_mm(cpu);
-	}
-out:
-	ack_APIC_irq();
-	smp_mb__before_clear_bit();
-	cpumask_clear_cpu(cpu, flush_cpumask);
-	smp_mb__after_clear_bit();
-	inc_irq_stat(irq_tlb_count);
-}
-
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     struct mm_struct *mm, unsigned long va)
-{
-	/*
-	 * - mask must exist :)
-	 */
-	BUG_ON(cpumask_empty(cpumask));
-	BUG_ON(!mm);
-
-	/*
-	 * i'm not happy about this global shared spinlock in the
-	 * MM hot path, but we'll see how contended it is.
-	 * AK: x86-64 has a faster method that could be ported.
-	 */
-	spin_lock(&tlbstate_lock);
-
-	cpumask_andnot(flush_cpumask, cpumask, cpumask_of(smp_processor_id()));
-#ifdef CONFIG_HOTPLUG_CPU
-	/* If a CPU which we ran on has gone down, OK. */
-	cpumask_and(flush_cpumask, flush_cpumask, cpu_online_mask);
-	if (unlikely(cpumask_empty(flush_cpumask))) {
-		spin_unlock(&tlbstate_lock);
-		return;
-	}
-#endif
-	flush_mm = mm;
-	flush_va = va;
-
-	/*
-	 * Make the above memory operations globally visible before
-	 * sending the IPI.
-	 */
-	smp_mb();
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	send_IPI_mask(flush_cpumask, INVALIDATE_TLB_VECTOR);
-
-	while (!cpumask_empty(flush_cpumask))
-		/* nothing. lockup detection does not belong here */
-		cpu_relax();
-
-	flush_mm = NULL;
-	flush_va = 0;
-	spin_unlock(&tlbstate_lock);
-}
-
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-
-	preempt_disable();
-
-	local_flush_tlb();
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
-	preempt_enable();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			leave_mm(smp_processor_id());
-	}
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			__flush_tlb_one(va);
-		 else
-			leave_mm(smp_processor_id());
-	}
-
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
-	preempt_enable();
-}
-
-static void do_flush_tlb_all(void *info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
-		leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, NULL, 1);
-}
-
-static int init_flush_cpumask(void)
-{
-	alloc_cpumask_var(&flush_cpumask, GFP_KERNEL);
-	return 0;
-}
-early_initcall(init_flush_cpumask);
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 19ac661422f..b3ca1b94065 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -113,7 +113,17 @@ EXPORT_SYMBOL_GPL(leave_mm);
  * Interrupts are disabled.
  */
 
-asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
+/*
+ * FIXME: use of asmlinkage is not consistent.  On x86_64 it's noop
+ * but still used for documentation purpose but the usage is slightly
+ * inconsistent.  On x86_32, asmlinkage is regparm(0) but interrupt
+ * entry calls in with the first parameter in %eax.  Maybe define
+ * intrlinkage?
+ */
+#ifdef CONFIG_X86_64
+asmlinkage
+#endif
+void smp_invalidate_interrupt(struct pt_regs *regs)
 {
 	unsigned int cpu;
 	unsigned int sender;
-- 
cgit v1.2.3


From 16c2d3f895a3bc8d8e4c76c2646a6b750c181299 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 21 Jan 2009 17:26:06 +0900
Subject: x86: rename tlb_64.c to tlb.c

Impact: file rename

tlb_64.c is now the tlb code for both 32 and 64.  Rename it to tlb.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/Makefile |   2 +-
 arch/x86/kernel/tlb.c    | 296 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/tlb_64.c | 296 -----------------------------------------------
 3 files changed, 297 insertions(+), 297 deletions(-)
 create mode 100644 arch/x86/kernel/tlb.c
 delete mode 100644 arch/x86/kernel/tlb_64.c

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index a62a15c2222..0626a88fbb4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -58,7 +58,7 @@ obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_X86_SMP)		+= smp.o
-obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb_64.o
+obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb.o
 obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
diff --git a/arch/x86/kernel/tlb.c b/arch/x86/kernel/tlb.c
new file mode 100644
index 00000000000..b3ca1b94065
--- /dev/null
+++ b/arch/x86/kernel/tlb.c
@@ -0,0 +1,296 @@
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/apic.h>
+#include <asm/uv/uv.h>
+
+DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
+			= { &init_mm, 0, };
+
+#include <mach_ipi.h>
+/*
+ *	Smarter SMP flushing macros.
+ *		c/o Linus Torvalds.
+ *
+ *	These mean you can really definitely utterly forget about
+ *	writing to user space from interrupts. (Its not allowed anyway).
+ *
+ *	Optimizations Manfred Spraul <manfred@colorfullife.com>
+ *
+ *	More scalable flush, from Andi Kleen
+ *
+ *	To avoid global state use 8 different call vectors.
+ *	Each CPU uses a specific vector to trigger flushes on other
+ *	CPUs. Depending on the received vector the target CPUs look into
+ *	the right per cpu variable for the flush data.
+ *
+ *	With more than 8 CPUs they are hashed to the 8 available
+ *	vectors. The limited global vector space forces us to this right now.
+ *	In future when interrupts are split into per CPU domains this could be
+ *	fixed, at the cost of triggering multiple IPIs in some cases.
+ */
+
+union smp_flush_state {
+	struct {
+		struct mm_struct *flush_mm;
+		unsigned long flush_va;
+		spinlock_t tlbstate_lock;
+		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
+	};
+	char pad[SMP_CACHE_BYTES];
+} ____cacheline_aligned;
+
+/* State is put into the per CPU data section, but padded
+   to a full cache line because other CPUs can access it and we don't
+   want false sharing in the per cpu data segment. */
+static DEFINE_PER_CPU(union smp_flush_state, flush_state);
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ */
+void leave_mm(int cpu)
+{
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
+		BUG();
+	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
+	load_cr3(swapper_pg_dir);
+}
+EXPORT_SYMBOL_GPL(leave_mm);
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ *	Stop ipi delivery for the old mm. This is not synchronized with
+ *	the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ *	for the wrong mm, and in the worst case we perform a superfluous
+ *	tlb flush.
+ * 1a2) set cpu mmu_state to TLBSTATE_OK
+ *	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ *	was in lazy tlb mode.
+ * 1a3) update cpu active_mm
+ *	Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ *	Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ *	cpu active_mm is correct, cpu0 already handles
+ *	flush ipis.
+ * 1b1) set cpu mmu_state to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ *	Atomically set the bit [other cpus will start sending flush ipis],
+ *	and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ *   runs in kernel space, the cpu could load tlb entries for user space
+ *   pages.
+ *
+ * The good news is that cpu mmu_state is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ *
+ * Interrupts are disabled.
+ */
+
+/*
+ * FIXME: use of asmlinkage is not consistent.  On x86_64 it's noop
+ * but still used for documentation purpose but the usage is slightly
+ * inconsistent.  On x86_32, asmlinkage is regparm(0) but interrupt
+ * entry calls in with the first parameter in %eax.  Maybe define
+ * intrlinkage?
+ */
+#ifdef CONFIG_X86_64
+asmlinkage
+#endif
+void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+	unsigned int cpu;
+	unsigned int sender;
+	union smp_flush_state *f;
+
+	cpu = smp_processor_id();
+	/*
+	 * orig_rax contains the negated interrupt vector.
+	 * Use that to determine where the sender put the data.
+	 */
+	sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
+	f = &per_cpu(flush_state, sender);
+
+	if (!cpumask_test_cpu(cpu, to_cpumask(f->flush_cpumask)))
+		goto out;
+		/*
+		 * This was a BUG() but until someone can quote me the
+		 * line from the intel manual that guarantees an IPI to
+		 * multiple CPUs is retried _only_ on the erroring CPUs
+		 * its staying as a return
+		 *
+		 * BUG();
+		 */
+
+	if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
+		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
+			if (f->flush_va == TLB_FLUSH_ALL)
+				local_flush_tlb();
+			else
+				__flush_tlb_one(f->flush_va);
+		} else
+			leave_mm(cpu);
+	}
+out:
+	ack_APIC_irq();
+	smp_mb__before_clear_bit();
+	cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask));
+	smp_mb__after_clear_bit();
+	inc_irq_stat(irq_tlb_count);
+}
+
+static void flush_tlb_others_ipi(const struct cpumask *cpumask,
+				 struct mm_struct *mm, unsigned long va)
+{
+	unsigned int sender;
+	union smp_flush_state *f;
+
+	/* Caller has disabled preemption */
+	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
+	f = &per_cpu(flush_state, sender);
+
+	/*
+	 * Could avoid this lock when
+	 * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
+	 * probably not worth checking this for a cache-hot lock.
+	 */
+	spin_lock(&f->tlbstate_lock);
+
+	f->flush_mm = mm;
+	f->flush_va = va;
+	cpumask_andnot(to_cpumask(f->flush_cpumask),
+		       cpumask, cpumask_of(smp_processor_id()));
+
+	/*
+	 * Make the above memory operations globally visible before
+	 * sending the IPI.
+	 */
+	smp_mb();
+	/*
+	 * We have to send the IPI only to
+	 * CPUs affected.
+	 */
+	send_IPI_mask(to_cpumask(f->flush_cpumask),
+		      INVALIDATE_TLB_VECTOR_START + sender);
+
+	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
+		cpu_relax();
+
+	f->flush_mm = NULL;
+	f->flush_va = 0;
+	spin_unlock(&f->tlbstate_lock);
+}
+
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     struct mm_struct *mm, unsigned long va)
+{
+	if (is_uv_system()) {
+		unsigned int cpu;
+
+		cpu = get_cpu();
+		cpumask = uv_flush_tlb_others(cpumask, mm, va, cpu);
+		if (cpumask)
+			flush_tlb_others_ipi(cpumask, mm, va);
+		put_cpu();
+		return;
+	}
+	flush_tlb_others_ipi(cpumask, mm, va);
+}
+
+static int __cpuinit init_smp_flush(void)
+{
+	int i;
+
+	for_each_possible_cpu(i)
+		spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
+
+	return 0;
+}
+core_initcall(init_smp_flush);
+
+void flush_tlb_current_task(void)
+{
+	struct mm_struct *mm = current->mm;
+
+	preempt_disable();
+
+	local_flush_tlb();
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+	preempt_enable();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	preempt_disable();
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			local_flush_tlb();
+		else
+			leave_mm(smp_processor_id());
+	}
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+
+	preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	preempt_disable();
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			__flush_tlb_one(va);
+		else
+			leave_mm(smp_processor_id());
+	}
+
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
+
+	preempt_enable();
+}
+
+static void do_flush_tlb_all(void *info)
+{
+	unsigned long cpu = smp_processor_id();
+
+	__flush_tlb_all();
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
+		leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(do_flush_tlb_all, NULL, 1);
+}
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
deleted file mode 100644
index b3ca1b94065..00000000000
--- a/arch/x86/kernel/tlb_64.c
+++ /dev/null
@@ -1,296 +0,0 @@
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/apic.h>
-#include <asm/uv/uv.h>
-
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
-			= { &init_mm, 0, };
-
-#include <mach_ipi.h>
-/*
- *	Smarter SMP flushing macros.
- *		c/o Linus Torvalds.
- *
- *	These mean you can really definitely utterly forget about
- *	writing to user space from interrupts. (Its not allowed anyway).
- *
- *	Optimizations Manfred Spraul <manfred@colorfullife.com>
- *
- *	More scalable flush, from Andi Kleen
- *
- *	To avoid global state use 8 different call vectors.
- *	Each CPU uses a specific vector to trigger flushes on other
- *	CPUs. Depending on the received vector the target CPUs look into
- *	the right per cpu variable for the flush data.
- *
- *	With more than 8 CPUs they are hashed to the 8 available
- *	vectors. The limited global vector space forces us to this right now.
- *	In future when interrupts are split into per CPU domains this could be
- *	fixed, at the cost of triggering multiple IPIs in some cases.
- */
-
-union smp_flush_state {
-	struct {
-		struct mm_struct *flush_mm;
-		unsigned long flush_va;
-		spinlock_t tlbstate_lock;
-		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
-	};
-	char pad[SMP_CACHE_BYTES];
-} ____cacheline_aligned;
-
-/* State is put into the per CPU data section, but padded
-   to a full cache line because other CPUs can access it and we don't
-   want false sharing in the per cpu data segment. */
-static DEFINE_PER_CPU(union smp_flush_state, flush_state);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- */
-void leave_mm(int cpu)
-{
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
-		BUG();
-	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-EXPORT_SYMBOL_GPL(leave_mm);
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- *	Stop ipi delivery for the old mm. This is not synchronized with
- *	the other cpus, but smp_invalidate_interrupt ignore flush ipis
- *	for the wrong mm, and in the worst case we perform a superfluous
- *	tlb flush.
- * 1a2) set cpu mmu_state to TLBSTATE_OK
- *	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- *	was in lazy tlb mode.
- * 1a3) update cpu active_mm
- *	Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- *	Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- *	cpu active_mm is correct, cpu0 already handles
- *	flush ipis.
- * 1b1) set cpu mmu_state to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- *	Atomically set the bit [other cpus will start sending flush ipis],
- *	and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- *   runs in kernel space, the cpu could load tlb entries for user space
- *   pages.
- *
- * The good news is that cpu mmu_state is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- *
- * Interrupts are disabled.
- */
-
-/*
- * FIXME: use of asmlinkage is not consistent.  On x86_64 it's noop
- * but still used for documentation purpose but the usage is slightly
- * inconsistent.  On x86_32, asmlinkage is regparm(0) but interrupt
- * entry calls in with the first parameter in %eax.  Maybe define
- * intrlinkage?
- */
-#ifdef CONFIG_X86_64
-asmlinkage
-#endif
-void smp_invalidate_interrupt(struct pt_regs *regs)
-{
-	unsigned int cpu;
-	unsigned int sender;
-	union smp_flush_state *f;
-
-	cpu = smp_processor_id();
-	/*
-	 * orig_rax contains the negated interrupt vector.
-	 * Use that to determine where the sender put the data.
-	 */
-	sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
-	f = &per_cpu(flush_state, sender);
-
-	if (!cpumask_test_cpu(cpu, to_cpumask(f->flush_cpumask)))
-		goto out;
-		/*
-		 * This was a BUG() but until someone can quote me the
-		 * line from the intel manual that guarantees an IPI to
-		 * multiple CPUs is retried _only_ on the erroring CPUs
-		 * its staying as a return
-		 *
-		 * BUG();
-		 */
-
-	if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
-		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
-			if (f->flush_va == TLB_FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(f->flush_va);
-		} else
-			leave_mm(cpu);
-	}
-out:
-	ack_APIC_irq();
-	smp_mb__before_clear_bit();
-	cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask));
-	smp_mb__after_clear_bit();
-	inc_irq_stat(irq_tlb_count);
-}
-
-static void flush_tlb_others_ipi(const struct cpumask *cpumask,
-				 struct mm_struct *mm, unsigned long va)
-{
-	unsigned int sender;
-	union smp_flush_state *f;
-
-	/* Caller has disabled preemption */
-	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
-	f = &per_cpu(flush_state, sender);
-
-	/*
-	 * Could avoid this lock when
-	 * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
-	 * probably not worth checking this for a cache-hot lock.
-	 */
-	spin_lock(&f->tlbstate_lock);
-
-	f->flush_mm = mm;
-	f->flush_va = va;
-	cpumask_andnot(to_cpumask(f->flush_cpumask),
-		       cpumask, cpumask_of(smp_processor_id()));
-
-	/*
-	 * Make the above memory operations globally visible before
-	 * sending the IPI.
-	 */
-	smp_mb();
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	send_IPI_mask(to_cpumask(f->flush_cpumask),
-		      INVALIDATE_TLB_VECTOR_START + sender);
-
-	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
-		cpu_relax();
-
-	f->flush_mm = NULL;
-	f->flush_va = 0;
-	spin_unlock(&f->tlbstate_lock);
-}
-
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     struct mm_struct *mm, unsigned long va)
-{
-	if (is_uv_system()) {
-		unsigned int cpu;
-
-		cpu = get_cpu();
-		cpumask = uv_flush_tlb_others(cpumask, mm, va, cpu);
-		if (cpumask)
-			flush_tlb_others_ipi(cpumask, mm, va);
-		put_cpu();
-		return;
-	}
-	flush_tlb_others_ipi(cpumask, mm, va);
-}
-
-static int __cpuinit init_smp_flush(void)
-{
-	int i;
-
-	for_each_possible_cpu(i)
-		spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
-
-	return 0;
-}
-core_initcall(init_smp_flush);
-
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-
-	preempt_disable();
-
-	local_flush_tlb();
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
-	preempt_enable();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			leave_mm(smp_processor_id());
-	}
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			__flush_tlb_one(va);
-		else
-			leave_mm(smp_processor_id());
-	}
-
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
-
-	preempt_enable();
-}
-
-static void do_flush_tlb_all(void *info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
-		leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, NULL, 1);
-}
-- 
cgit v1.2.3


From 55f4949f5765e7a29863b6d17a774601810732f5 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 21 Jan 2009 10:08:53 +0100
Subject: x86, mm: move tlb.c to arch/x86/mm/

Impact: cleanup

Now that it's unified, move the (SMP) TLB flushing code from arch/x86/kernel/
to arch/x86/mm/, where it belongs logically.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile |   2 +-
 arch/x86/kernel/tlb.c    | 296 -----------------------------------------------
 arch/x86/mm/Makefile     |   2 +
 arch/x86/mm/tlb.c        | 296 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 299 insertions(+), 297 deletions(-)
 delete mode 100644 arch/x86/kernel/tlb.c
 create mode 100644 arch/x86/mm/tlb.c

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0626a88fbb4..0b3272f58bd 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -58,7 +58,7 @@ obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_X86_SMP)		+= smp.o
-obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb.o
+obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o
 obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
diff --git a/arch/x86/kernel/tlb.c b/arch/x86/kernel/tlb.c
deleted file mode 100644
index b3ca1b94065..00000000000
--- a/arch/x86/kernel/tlb.c
+++ /dev/null
@@ -1,296 +0,0 @@
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/apic.h>
-#include <asm/uv/uv.h>
-
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
-			= { &init_mm, 0, };
-
-#include <mach_ipi.h>
-/*
- *	Smarter SMP flushing macros.
- *		c/o Linus Torvalds.
- *
- *	These mean you can really definitely utterly forget about
- *	writing to user space from interrupts. (Its not allowed anyway).
- *
- *	Optimizations Manfred Spraul <manfred@colorfullife.com>
- *
- *	More scalable flush, from Andi Kleen
- *
- *	To avoid global state use 8 different call vectors.
- *	Each CPU uses a specific vector to trigger flushes on other
- *	CPUs. Depending on the received vector the target CPUs look into
- *	the right per cpu variable for the flush data.
- *
- *	With more than 8 CPUs they are hashed to the 8 available
- *	vectors. The limited global vector space forces us to this right now.
- *	In future when interrupts are split into per CPU domains this could be
- *	fixed, at the cost of triggering multiple IPIs in some cases.
- */
-
-union smp_flush_state {
-	struct {
-		struct mm_struct *flush_mm;
-		unsigned long flush_va;
-		spinlock_t tlbstate_lock;
-		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
-	};
-	char pad[SMP_CACHE_BYTES];
-} ____cacheline_aligned;
-
-/* State is put into the per CPU data section, but padded
-   to a full cache line because other CPUs can access it and we don't
-   want false sharing in the per cpu data segment. */
-static DEFINE_PER_CPU(union smp_flush_state, flush_state);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- */
-void leave_mm(int cpu)
-{
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
-		BUG();
-	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-EXPORT_SYMBOL_GPL(leave_mm);
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- *	Stop ipi delivery for the old mm. This is not synchronized with
- *	the other cpus, but smp_invalidate_interrupt ignore flush ipis
- *	for the wrong mm, and in the worst case we perform a superfluous
- *	tlb flush.
- * 1a2) set cpu mmu_state to TLBSTATE_OK
- *	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- *	was in lazy tlb mode.
- * 1a3) update cpu active_mm
- *	Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- *	Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- *	cpu active_mm is correct, cpu0 already handles
- *	flush ipis.
- * 1b1) set cpu mmu_state to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- *	Atomically set the bit [other cpus will start sending flush ipis],
- *	and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- *   runs in kernel space, the cpu could load tlb entries for user space
- *   pages.
- *
- * The good news is that cpu mmu_state is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- *
- * Interrupts are disabled.
- */
-
-/*
- * FIXME: use of asmlinkage is not consistent.  On x86_64 it's noop
- * but still used for documentation purpose but the usage is slightly
- * inconsistent.  On x86_32, asmlinkage is regparm(0) but interrupt
- * entry calls in with the first parameter in %eax.  Maybe define
- * intrlinkage?
- */
-#ifdef CONFIG_X86_64
-asmlinkage
-#endif
-void smp_invalidate_interrupt(struct pt_regs *regs)
-{
-	unsigned int cpu;
-	unsigned int sender;
-	union smp_flush_state *f;
-
-	cpu = smp_processor_id();
-	/*
-	 * orig_rax contains the negated interrupt vector.
-	 * Use that to determine where the sender put the data.
-	 */
-	sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
-	f = &per_cpu(flush_state, sender);
-
-	if (!cpumask_test_cpu(cpu, to_cpumask(f->flush_cpumask)))
-		goto out;
-		/*
-		 * This was a BUG() but until someone can quote me the
-		 * line from the intel manual that guarantees an IPI to
-		 * multiple CPUs is retried _only_ on the erroring CPUs
-		 * its staying as a return
-		 *
-		 * BUG();
-		 */
-
-	if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
-		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
-			if (f->flush_va == TLB_FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(f->flush_va);
-		} else
-			leave_mm(cpu);
-	}
-out:
-	ack_APIC_irq();
-	smp_mb__before_clear_bit();
-	cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask));
-	smp_mb__after_clear_bit();
-	inc_irq_stat(irq_tlb_count);
-}
-
-static void flush_tlb_others_ipi(const struct cpumask *cpumask,
-				 struct mm_struct *mm, unsigned long va)
-{
-	unsigned int sender;
-	union smp_flush_state *f;
-
-	/* Caller has disabled preemption */
-	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
-	f = &per_cpu(flush_state, sender);
-
-	/*
-	 * Could avoid this lock when
-	 * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
-	 * probably not worth checking this for a cache-hot lock.
-	 */
-	spin_lock(&f->tlbstate_lock);
-
-	f->flush_mm = mm;
-	f->flush_va = va;
-	cpumask_andnot(to_cpumask(f->flush_cpumask),
-		       cpumask, cpumask_of(smp_processor_id()));
-
-	/*
-	 * Make the above memory operations globally visible before
-	 * sending the IPI.
-	 */
-	smp_mb();
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	send_IPI_mask(to_cpumask(f->flush_cpumask),
-		      INVALIDATE_TLB_VECTOR_START + sender);
-
-	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
-		cpu_relax();
-
-	f->flush_mm = NULL;
-	f->flush_va = 0;
-	spin_unlock(&f->tlbstate_lock);
-}
-
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     struct mm_struct *mm, unsigned long va)
-{
-	if (is_uv_system()) {
-		unsigned int cpu;
-
-		cpu = get_cpu();
-		cpumask = uv_flush_tlb_others(cpumask, mm, va, cpu);
-		if (cpumask)
-			flush_tlb_others_ipi(cpumask, mm, va);
-		put_cpu();
-		return;
-	}
-	flush_tlb_others_ipi(cpumask, mm, va);
-}
-
-static int __cpuinit init_smp_flush(void)
-{
-	int i;
-
-	for_each_possible_cpu(i)
-		spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
-
-	return 0;
-}
-core_initcall(init_smp_flush);
-
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-
-	preempt_disable();
-
-	local_flush_tlb();
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
-	preempt_enable();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			leave_mm(smp_processor_id());
-	}
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	preempt_disable();
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			__flush_tlb_one(va);
-		else
-			leave_mm(smp_processor_id());
-	}
-
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
-
-	preempt_enable();
-}
-
-static void do_flush_tlb_all(void *info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
-		leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, NULL, 1);
-}
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index d8cc96a2738..9f05157220f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,8 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o gup.o
 
+obj-$(CONFIG_X86_SMP)		+= tlb.o
+
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
new file mode 100644
index 00000000000..b3ca1b94065
--- /dev/null
+++ b/arch/x86/mm/tlb.c
@@ -0,0 +1,296 @@
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/apic.h>
+#include <asm/uv/uv.h>
+
+DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
+			= { &init_mm, 0, };
+
+#include <mach_ipi.h>
+/*
+ *	Smarter SMP flushing macros.
+ *		c/o Linus Torvalds.
+ *
+ *	These mean you can really definitely utterly forget about
+ *	writing to user space from interrupts. (Its not allowed anyway).
+ *
+ *	Optimizations Manfred Spraul <manfred@colorfullife.com>
+ *
+ *	More scalable flush, from Andi Kleen
+ *
+ *	To avoid global state use 8 different call vectors.
+ *	Each CPU uses a specific vector to trigger flushes on other
+ *	CPUs. Depending on the received vector the target CPUs look into
+ *	the right per cpu variable for the flush data.
+ *
+ *	With more than 8 CPUs they are hashed to the 8 available
+ *	vectors. The limited global vector space forces us to this right now.
+ *	In future when interrupts are split into per CPU domains this could be
+ *	fixed, at the cost of triggering multiple IPIs in some cases.
+ */
+
+union smp_flush_state {
+	struct {
+		struct mm_struct *flush_mm;
+		unsigned long flush_va;
+		spinlock_t tlbstate_lock;
+		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
+	};
+	char pad[SMP_CACHE_BYTES];
+} ____cacheline_aligned;
+
+/* State is put into the per CPU data section, but padded
+   to a full cache line because other CPUs can access it and we don't
+   want false sharing in the per cpu data segment. */
+static DEFINE_PER_CPU(union smp_flush_state, flush_state);
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ */
+void leave_mm(int cpu)
+{
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
+		BUG();
+	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
+	load_cr3(swapper_pg_dir);
+}
+EXPORT_SYMBOL_GPL(leave_mm);
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ *	Stop ipi delivery for the old mm. This is not synchronized with
+ *	the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ *	for the wrong mm, and in the worst case we perform a superfluous
+ *	tlb flush.
+ * 1a2) set cpu mmu_state to TLBSTATE_OK
+ *	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ *	was in lazy tlb mode.
+ * 1a3) update cpu active_mm
+ *	Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ *	Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ *	cpu active_mm is correct, cpu0 already handles
+ *	flush ipis.
+ * 1b1) set cpu mmu_state to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ *	Atomically set the bit [other cpus will start sending flush ipis],
+ *	and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ *   runs in kernel space, the cpu could load tlb entries for user space
+ *   pages.
+ *
+ * The good news is that cpu mmu_state is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ *
+ * Interrupts are disabled.
+ */
+
+/*
+ * FIXME: use of asmlinkage is not consistent.  On x86_64 it's noop
+ * but still used for documentation purpose but the usage is slightly
+ * inconsistent.  On x86_32, asmlinkage is regparm(0) but interrupt
+ * entry calls in with the first parameter in %eax.  Maybe define
+ * intrlinkage?
+ */
+#ifdef CONFIG_X86_64
+asmlinkage
+#endif
+void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+	unsigned int cpu;
+	unsigned int sender;
+	union smp_flush_state *f;
+
+	cpu = smp_processor_id();
+	/*
+	 * orig_rax contains the negated interrupt vector.
+	 * Use that to determine where the sender put the data.
+	 */
+	sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
+	f = &per_cpu(flush_state, sender);
+
+	if (!cpumask_test_cpu(cpu, to_cpumask(f->flush_cpumask)))
+		goto out;
+		/*
+		 * This was a BUG() but until someone can quote me the
+		 * line from the intel manual that guarantees an IPI to
+		 * multiple CPUs is retried _only_ on the erroring CPUs
+		 * its staying as a return
+		 *
+		 * BUG();
+		 */
+
+	if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
+		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
+			if (f->flush_va == TLB_FLUSH_ALL)
+				local_flush_tlb();
+			else
+				__flush_tlb_one(f->flush_va);
+		} else
+			leave_mm(cpu);
+	}
+out:
+	ack_APIC_irq();
+	smp_mb__before_clear_bit();
+	cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask));
+	smp_mb__after_clear_bit();
+	inc_irq_stat(irq_tlb_count);
+}
+
+static void flush_tlb_others_ipi(const struct cpumask *cpumask,
+				 struct mm_struct *mm, unsigned long va)
+{
+	unsigned int sender;
+	union smp_flush_state *f;
+
+	/* Caller has disabled preemption */
+	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
+	f = &per_cpu(flush_state, sender);
+
+	/*
+	 * Could avoid this lock when
+	 * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
+	 * probably not worth checking this for a cache-hot lock.
+	 */
+	spin_lock(&f->tlbstate_lock);
+
+	f->flush_mm = mm;
+	f->flush_va = va;
+	cpumask_andnot(to_cpumask(f->flush_cpumask),
+		       cpumask, cpumask_of(smp_processor_id()));
+
+	/*
+	 * Make the above memory operations globally visible before
+	 * sending the IPI.
+	 */
+	smp_mb();
+	/*
+	 * We have to send the IPI only to
+	 * CPUs affected.
+	 */
+	send_IPI_mask(to_cpumask(f->flush_cpumask),
+		      INVALIDATE_TLB_VECTOR_START + sender);
+
+	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
+		cpu_relax();
+
+	f->flush_mm = NULL;
+	f->flush_va = 0;
+	spin_unlock(&f->tlbstate_lock);
+}
+
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     struct mm_struct *mm, unsigned long va)
+{
+	if (is_uv_system()) {
+		unsigned int cpu;
+
+		cpu = get_cpu();
+		cpumask = uv_flush_tlb_others(cpumask, mm, va, cpu);
+		if (cpumask)
+			flush_tlb_others_ipi(cpumask, mm, va);
+		put_cpu();
+		return;
+	}
+	flush_tlb_others_ipi(cpumask, mm, va);
+}
+
+static int __cpuinit init_smp_flush(void)
+{
+	int i;
+
+	for_each_possible_cpu(i)
+		spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
+
+	return 0;
+}
+core_initcall(init_smp_flush);
+
+void flush_tlb_current_task(void)
+{
+	struct mm_struct *mm = current->mm;
+
+	preempt_disable();
+
+	local_flush_tlb();
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+	preempt_enable();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	preempt_disable();
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			local_flush_tlb();
+		else
+			leave_mm(smp_processor_id());
+	}
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+
+	preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	preempt_disable();
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			__flush_tlb_one(va);
+		else
+			leave_mm(smp_processor_id());
+	}
+
+	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
+
+	preempt_enable();
+}
+
+static void do_flush_tlb_all(void *info)
+{
+	unsigned long cpu = smp_processor_id();
+
+	__flush_tlb_all();
+	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
+		leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(do_flush_tlb_all, NULL, 1);
+}
-- 
cgit v1.2.3


From 4ec71fa2d2c3f1040348f2604f4b8ccc833d1c2e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 21 Jan 2009 10:24:27 +0100
Subject: x86: uv cleanup, build fix
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix:

 arch/x86/mm/srat_64.c: In function ‘acpi_numa_processor_affinity_init’:
 arch/x86/mm/srat_64.c:141: error: implicit declaration of function ‘get_uv_system_type’
 arch/x86/mm/srat_64.c:141: error: ‘UV_X2APIC’ undeclared (first use in this function)
 arch/x86/mm/srat_64.c:141: error: (Each undeclared identifier is reported only once
 arch/x86/mm/srat_64.c:141: error: for each function it appears in.)

A couple of UV definitions were moved to asm/uv/uv.h, but srat_64.c did
not include that header. Add it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_64.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 09737c8af07..15df1baee10 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -21,6 +21,7 @@
 #include <asm/numa.h>
 #include <asm/e820.h>
 #include <asm/genapic.h>
+#include <asm/uv/uv.h>
 
 int acpi_numa __initdata;
 
-- 
cgit v1.2.3


From ace6c6c840878342f698f0da6588dd5ded755369 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 21 Jan 2009 10:32:44 +0100
Subject: x86: make x86_32 use tlb_64.c, build fix, clean up X86_L1_CACHE_BYTES
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix:

  arch/x86/mm/tlb.c:47: error: ‘CONFIG_X86_INTERNODE_CACHE_BYTES’ undeclared here (not in a function)

The CONFIG_X86_INTERNODE_CACHE_BYTES symbol is only defined on 64-bit,
because vsmp support is 64-bit only. Define it on 32-bit too - where it
will always be equal to X86_L1_CACHE_BYTES.

Also move the default of X86_L1_CACHE_BYTES (which is separate from the
more commonly used L1_CACHE_SHIFT kconfig symbol) from 128 bytes to
64 bytes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig.cpu | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index cdf4a962323..8eb50ba9161 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -292,15 +292,13 @@ config X86_CPU
 # Define implied options from the CPU selection here
 config X86_L1_CACHE_BYTES
 	int
-	default "128" if GENERIC_CPU || MPSC
-	default "64" if MK8 || MCORE2
-	depends on X86_64
+	default "128" if MPSC
+	default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32
 
 config X86_INTERNODE_CACHE_BYTES
 	int
 	default "4096" if X86_VSMP
 	default X86_L1_CACHE_BYTES if !X86_VSMP
-	depends on X86_64
 
 config X86_CMPXCHG
 	def_bool X86_64 || (X86_32 && !M386)
-- 
cgit v1.2.3


From 4d5d783896fc8c37be88ee5837ca9b3c13fcd55b Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Mon, 19 Jan 2009 16:34:26 -0800
Subject: x86: uaccess: fix style problems

Impact: cleanup

Fix coding style problems in arch/x86/include/asm/uaccess.h.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 4340055b755..aeb3c1b074c 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -121,7 +121,7 @@ extern int __get_user_bad(void);
 
 #define __get_user_x(size, ret, x, ptr)		      \
 	asm volatile("call __get_user_" #size	      \
-		     : "=a" (ret),"=d" (x)	      \
+		     : "=a" (ret), "=d" (x)	      \
 		     : "0" (ptr))		      \
 
 /* Careful: we have to cast the result to the type of the pointer
@@ -181,7 +181,7 @@ extern int __get_user_bad(void);
 
 #define __put_user_x(size, x, ptr, __ret_pu)			\
 	asm volatile("call __put_user_" #size : "=a" (__ret_pu)	\
-		     :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+		     : "0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 
 
 
@@ -276,7 +276,7 @@ do {									\
 		__put_user_asm(x, ptr, retval, "w", "w", "ir", errret);	\
 		break;							\
 	case 4:								\
-		__put_user_asm(x, ptr, retval, "l", "k",  "ir", errret);\
+		__put_user_asm(x, ptr, retval, "l", "k", "ir", errret);	\
 		break;							\
 	case 8:								\
 		__put_user_u64((__typeof__(*ptr))(x), ptr, retval);	\
-- 
cgit v1.2.3


From cc86c9e0dc1a41451240b948bb39d46bb2536ae8 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Mon, 19 Jan 2009 16:37:41 -0800
Subject: x86: uaccess: rename __put_user_u64() to __put_user_asm_u64()

Impact: cleanup

rename __put_user_u64() to __put_user_asm_u64() like __get_user_asm_u64().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index aeb3c1b074c..69d2757cca9 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -186,7 +186,7 @@ extern int __get_user_bad(void);
 
 
 #ifdef CONFIG_X86_32
-#define __put_user_u64(x, addr, err)					\
+#define __put_user_asm_u64(x, addr, err)				\
 	asm volatile("1:	movl %%eax,0(%2)\n"			\
 		     "2:	movl %%edx,4(%2)\n"			\
 		     "3:\n"						\
@@ -203,7 +203,7 @@ extern int __get_user_bad(void);
 	asm volatile("call __put_user_8" : "=a" (__ret_pu)	\
 		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
-#define __put_user_u64(x, ptr, retval) \
+#define __put_user_asm_u64(x, ptr, retval) \
 	__put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
 #endif
@@ -279,7 +279,7 @@ do {									\
 		__put_user_asm(x, ptr, retval, "l", "k", "ir", errret);	\
 		break;							\
 	case 8:								\
-		__put_user_u64((__typeof__(*ptr))(x), ptr, retval);	\
+		__put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval);	\
 		break;							\
 	default:							\
 		__put_user_bad();					\
-- 
cgit v1.2.3


From 03b486322e994dde49e67aedb391867b7cf28822 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 20 Jan 2009 04:36:04 +0100
Subject: x86: make UV support configurable

Make X86 SGI Ultraviolet support configurable. Saves about 13K of text size
on my modest config.

   text    data     bss     dec     hex filename
6770537 1158680  694356 8623573  8395d5 vmlinux
6757492 1157664  694228 8609384  835e68 vmlinux.nouv

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig             | 7 +++++++
 arch/x86/include/asm/uv/uv.h | 6 +++---
 arch/x86/kernel/Makefile     | 5 +++--
 arch/x86/kernel/efi.c        | 2 ++
 arch/x86/kernel/entry_64.S   | 2 ++
 arch/x86/kernel/genapic_64.c | 2 ++
 arch/x86/kernel/io_apic.c    | 2 +-
 7 files changed, 20 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ef27aed6ff7..5a29b792cb8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -391,6 +391,13 @@ config X86_RDC321X
 	  as R-8610-(G).
 	  If you don't have one of these chips, you should say N here.
 
+config X86_UV
+	bool "SGI Ultraviolet"
+	depends on X86_64
+	help
+	  This option is needed in order to support SGI Ultraviolet systems.
+	  If you don't have one of these, you should say N here.
+
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index dce5fe35013..8ac1d7e312f 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -3,7 +3,7 @@
 
 enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_UV
 
 extern enum uv_system_type get_uv_system_type(void);
 extern int is_uv_system(void);
@@ -15,7 +15,7 @@ extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 unsigned long va,
 						 unsigned int cpu);
 
-#else	/* X86_64 */
+#else	/* X86_UV */
 
 static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
 static inline int is_uv_system(void)	{ return 0; }
@@ -28,6 +28,6 @@ uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm,
 		    unsigned long va, unsigned int cpu)
 { return cpumask; }
 
-#endif	/* X86_64 */
+#endif	/* X86_UV */
 
 #endif	/* _ASM_X86_UV_UV_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0b3272f58bd..a99437c965c 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -115,10 +115,11 @@ obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb_64.o # NB rename without _64
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
-        obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
-	obj-y				+= bios_uv.o uv_irq.o uv_sysfs.o
+        obj-y				+= genapic_64.o genapic_flat_64.o
         obj-y				+= genx2apic_cluster.o
         obj-y				+= genx2apic_phys.o
+	obj-$(CONFIG_X86_UV)		+= genx2apic_uv_x.o tlb_uv.o
+	obj-$(CONFIG_X86_UV)		+= bios_uv.o uv_irq.o uv_sysfs.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 1119d247fe1..b205272ad39 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -366,10 +366,12 @@ void __init efi_init(void)
 					SMBIOS_TABLE_GUID)) {
 			efi.smbios = config_tables[i].table;
 			printk(" SMBIOS=0x%lx ", config_tables[i].table);
+#ifdef CONFIG_X86_UV
 		} else if (!efi_guidcmp(config_tables[i].guid,
 					UV_SYSTEM_TABLE_GUID)) {
 			efi.uv_systab = config_tables[i].table;
 			printk(" UVsystab=0x%lx ", config_tables[i].table);
+#endif
 		} else if (!efi_guidcmp(config_tables[i].guid,
 					HCDP_TABLE_GUID)) {
 			efi.hcdp = config_tables[i].table;
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index c52b6091916..a52703864a1 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -982,8 +982,10 @@ apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
 	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
 #endif
 
+#ifdef CONFIG_X86_UV
 apicinterrupt UV_BAU_MESSAGE \
 	uv_bau_message_intr1 uv_bau_message_interrupt
+#endif
 apicinterrupt LOCAL_TIMER_VECTOR \
 	apic_timer_interrupt smp_apic_timer_interrupt
 
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 2bced78b0b8..e656c272115 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -32,7 +32,9 @@ extern struct genapic apic_x2apic_cluster;
 struct genapic __read_mostly *genapic = &apic_flat;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_UV
 	&apic_x2apic_uv_x,
+#endif
 	&apic_x2apic_phys,
 	&apic_x2apic_cluster,
 	&apic_physflat,
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index f7966039072..e4d36bd56b6 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3765,7 +3765,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 }
 #endif /* CONFIG_HT_IRQ */
 
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_UV
 /*
  * Re-target the irq to the specified CPU and enable the specified MMR located
  * on the specified blade to allow the sending of MSIs to the specified CPU.
-- 
cgit v1.2.3


From fb746d0e1365b7472ccc4c3d5b0672b34a092d0b Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@cmpxchg.org>
Date: Wed, 21 Jan 2009 20:45:41 +0100
Subject: x86: optimise page fault entry, cleanup

tsk is already assigned to current, drop the redundant second
assignment.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 033292dc9e2..8f4b859a04b 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -419,7 +419,6 @@ static noinline void pgtable_bad(struct pt_regs *regs,
 	printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
 	       tsk->comm, address);
 	dump_pagetable(address);
-	tsk = current;
 	tsk->thread.cr2 = address;
 	tsk->thread.trap_no = 14;
 	tsk->thread.error_code = error_code;
-- 
cgit v1.2.3


From 623d3f0c619f3576dae69709ca8aa93ac76d8c63 Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Wed, 21 Jan 2009 17:24:51 -0800
Subject: sparc64: Fix build by including linux/irq.h into time_64.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Changeset d7e51e66899f95dabc89b4d4c6674a6e50fa37fc ("sparseirq: make
some func to be used with genirq") broke the build on sparc64:

arch/sparc/kernel/time_64.c: In function ‘timer_interrupt’:
arch/sparc/kernel/time_64.c:732: error: implicit declaration of function ‘kstat_incr_irqs_this_cpu’
make[1]: *** [arch/sparc/kernel/time_64.o] Error 1

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/time_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 54405d36214..a55279939b6 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -36,10 +36,10 @@
 #include <linux/clocksource.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
-#include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/starfire.h>
-- 
cgit v1.2.3


From e81838d2555e77c893f720c25bfb0c0e5782ef57 Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Wed, 21 Jan 2009 17:15:53 -0800
Subject: sparc64: Fix build by using kstat_irqs_cpu()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Changeset d7e51e66899f95dabc89b4d4c6674a6e50fa37fc ("sparseirq: make
some func to be used with genirq") broke the build on sparc64:

arch/sparc/kernel/irq_64.c: In function ‘show_interrupts’:
arch/sparc/kernel/irq_64.c:188: error: ‘struct kernel_stat’ has no member named ‘irqs’
make[1]: *** [arch/sparc/kernel/irq_64.o] Error 1

Fix by using the kstat_irqs_cpu() interface.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/irq_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index cab8e028687..2e98bef5078 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -185,7 +185,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
 		seq_printf(p, " %9s", irq_desc[i].chip->typename);
 		seq_printf(p, "  %s", action->name);
-- 
cgit v1.2.3


From d639bab8da86d330493487e8c0fea8ca31f53427 Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Fri, 9 Jan 2009 16:13:13 -0800
Subject: x86 PAT: ioremap_wc should take resource_size_t parameter

Impact: fix/extend ioremap_wc() beyond 4GB aperture on 32-bit

ioremap_wc() was taking in unsigned long parameter, where as it should take
64-bit resource_size_t parameter like other ioremap variants.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/io.h | 2 +-
 arch/x86/mm/ioremap.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 05cfed4485f..bdbb4b96160 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -91,7 +91,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
 
 extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
 				unsigned long prot_val);
-extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
+extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
 
 /*
  * early_ioremap() and early_iounmap() are for temporary early boot-time
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index bd85d42819e..2ddb1e79a19 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -367,7 +367,7 @@ EXPORT_SYMBOL(ioremap_nocache);
  *
  * Must be freed with iounmap.
  */
-void __iomem *ioremap_wc(unsigned long phys_addr, unsigned long size)
+void __iomem *ioremap_wc(resource_size_t phys_addr, unsigned long size)
 {
 	if (pat_enabled)
 		return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC,
-- 
cgit v1.2.3


From ab897d2013128f470240a541b31cf5e636984e71 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 22 Jan 2009 14:24:16 -0800
Subject: x86/pvops: remove pte_flags pvop

pte_flags() was introduced as a new pvop in order to extract just the
flags portion of a pte, which is a potentially cheaper operation than
extracting the page number as well.  It turns out this operation is
not needed, because simply using a mask to extract the flags from a
pte is sufficient for all current users.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/page.h     |  3 +--
 arch/x86/include/asm/paravirt.h | 18 ------------------
 arch/x86/kernel/paravirt.c      |  1 -
 arch/x86/xen/enlighten.c        |  1 -
 4 files changed, 1 insertion(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index e9873a2e869..6b9810859da 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -147,7 +147,7 @@ static inline pteval_t native_pte_val(pte_t pte)
 	return pte.pte;
 }
 
-static inline pteval_t native_pte_flags(pte_t pte)
+static inline pteval_t pte_flags(pte_t pte)
 {
 	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
@@ -173,7 +173,6 @@ static inline pteval_t native_pte_flags(pte_t pte)
 #endif
 
 #define pte_val(x)	native_pte_val(x)
-#define pte_flags(x)	native_pte_flags(x)
 #define __pte(x)	native_make_pte(x)
 
 #endif	/* CONFIG_PARAVIRT */
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index ba3e2ff6aed..e25c410f3d8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -279,7 +279,6 @@ struct pv_mmu_ops {
 					pte_t *ptep, pte_t pte);
 
 	pteval_t (*pte_val)(pte_t);
-	pteval_t (*pte_flags)(pte_t);
 	pte_t (*make_pte)(pteval_t pte);
 
 	pgdval_t (*pgd_val)(pgd_t);
@@ -1084,23 +1083,6 @@ static inline pteval_t pte_val(pte_t pte)
 	return ret;
 }
 
-static inline pteval_t pte_flags(pte_t pte)
-{
-	pteval_t ret;
-
-	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags,
-				 pte.pte, (u64)pte.pte >> 32);
-	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
-				 pte.pte);
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-	BUG_ON(ret & PTE_PFN_MASK);
-#endif
-	return ret;
-}
-
 static inline pgd_t __pgd(pgdval_t val)
 {
 	pgdval_t ret;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index e4c8fb60887..202514be592 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -435,7 +435,6 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
 	.pte_val = native_pte_val,
-	.pte_flags = native_pte_flags,
 	.pgd_val = native_pgd_val,
 
 	.make_pte = native_make_pte,
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bea215230b2..6f1bb71aa13 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1314,7 +1314,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
 	.pte_val = xen_pte_val,
-	.pte_flags = native_pte_flags,
 	.pgd_val = xen_pgd_val,
 
 	.make_pte = xen_make_pte,
-- 
cgit v1.2.3


From 6522869c34664dd5f05a0a327e93915b1281c90d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 22 Jan 2009 14:24:22 -0800
Subject: x86: add pte_set_flags/clear_flags for pte flag manipulation

It's not necessary to deconstruct and reconstruct a pte every time its
flags are being updated.  Introduce pte_set_flags and pte_clear_flags
to set and clear flags in a pte.  This allows the flag manipulation
code to be inlined, and avoids calls via paravirt-ops.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 06bbcbd66e9..6ceaef08486 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -240,64 +240,78 @@ static inline int pmd_large(pmd_t pte)
 		(_PAGE_PSE | _PAGE_PRESENT);
 }
 
+static inline pte_t pte_set_flags(pte_t pte, pteval_t set)
+{
+	pteval_t v = native_pte_val(pte);
+
+	return native_make_pte(v | set);
+}
+
+static inline pte_t pte_clear_flags(pte_t pte, pteval_t clear)
+{
+	pteval_t v = native_pte_val(pte);
+
+	return native_make_pte(v & ~clear);
+}
+
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+	return pte_clear_flags(pte, _PAGE_DIRTY);
 }
 
 static inline pte_t pte_mkold(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+	return pte_clear_flags(pte, _PAGE_ACCESSED);
 }
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_RW);
+	return pte_clear_flags(pte, _PAGE_RW);
 }
 
 static inline pte_t pte_mkexec(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_NX);
+	return pte_clear_flags(pte, _PAGE_NX);
 }
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_DIRTY);
+	return pte_set_flags(pte, _PAGE_DIRTY);
 }
 
 static inline pte_t pte_mkyoung(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+	return pte_set_flags(pte, _PAGE_ACCESSED);
 }
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_RW);
+	return pte_set_flags(pte, _PAGE_RW);
 }
 
 static inline pte_t pte_mkhuge(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_PSE);
+	return pte_set_flags(pte, _PAGE_PSE);
 }
 
 static inline pte_t pte_clrhuge(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_PSE);
+	return pte_clear_flags(pte, _PAGE_PSE);
 }
 
 static inline pte_t pte_mkglobal(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_GLOBAL);
+	return pte_set_flags(pte, _PAGE_GLOBAL);
 }
 
 static inline pte_t pte_clrglobal(pte_t pte)
 {
-	return __pte(pte_val(pte) & ~_PAGE_GLOBAL);
+	return pte_clear_flags(pte, _PAGE_GLOBAL);
 }
 
 static inline pte_t pte_mkspecial(pte_t pte)
 {
-	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+	return pte_set_flags(pte, _PAGE_SPECIAL);
 }
 
 extern pteval_t __supported_pte_mask;
-- 
cgit v1.2.3


From 03d2989df9c1c7df5b33c7a87e0790465461836a Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Fri, 23 Jan 2009 11:03:28 +0900
Subject: x86: remove idle_timestamp from 32bit irq_cpustat_t

Impact: bogus irq_cpustat field removed

idle_timestamp is left over from the removed irqbalance code.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/hardirq_32.h | 1 -
 arch/x86/kernel/process_32.c      | 1 -
 2 files changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
index d4b5d731073..a70ed050fde 100644
--- a/arch/x86/include/asm/hardirq_32.h
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -6,7 +6,6 @@
 
 typedef struct {
 	unsigned int __softirq_pending;
-	unsigned long idle_timestamp;
 	unsigned int __nmi_count;	/* arch dependent */
 	unsigned int apic_timer_irqs;	/* arch dependent */
 	unsigned int irq0_irqs;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 2c00a57ccb9..1a1ae8edc40 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -108,7 +108,6 @@ void cpu_idle(void)
 				play_dead();
 
 			local_irq_disable();
-			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
 			/* Don't trace irqs off for idle */
 			stop_critical_timings();
 			pm_idle();
-- 
cgit v1.2.3


From 3819cd489ec5d18a4cbd2f05acdc516473caa105 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Fri, 23 Jan 2009 11:03:29 +0900
Subject: x86: remove include of apic.h from hardirq_64.h

Impact: cleanup

APIC definitions aren't needed here.  Remove the include and fix
up the fallout.

tj: added include to mce_intel_64.c.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/hardirq_64.h         | 1 -
 arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 1 +
 arch/x86/kernel/efi_64.c                  | 1 +
 arch/x86/kernel/irq_64.c                  | 1 +
 4 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
index a65bab20f6c..873c3c7bffc 100644
--- a/arch/x86/include/asm/hardirq_64.h
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -3,7 +3,6 @@
 
 #include <linux/threads.h>
 #include <linux/irq.h>
-#include <asm/apic.h>
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 4b48f251fd3..5e8c79e748a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -7,6 +7,7 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <asm/processor.h>
+#include <asm/apic.h>
 #include <asm/msr.h>
 #include <asm/mce.h>
 #include <asm/hw_irq.h>
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 652c5287215..a4ee29127fd 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -36,6 +36,7 @@
 #include <asm/proto.h>
 #include <asm/efi.h>
 #include <asm/cacheflush.h>
+#include <asm/fixmap.h>
 
 static pgd_t save_pgd __initdata;
 static unsigned long efi_flags __initdata;
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 0b254de8408..018963aa6ee 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <asm/io_apic.h>
 #include <asm/idle.h>
+#include <asm/apic.h>
 
 DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 EXPORT_PER_CPU_SYMBOL(irq_stat);
-- 
cgit v1.2.3


From 658a9a2c34914e8114eea9c4d85d4ecd3ee33b98 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Fri, 23 Jan 2009 11:03:31 +0900
Subject: x86: sync hardirq_{32,64}.h

Impact: better code generation and removal of unused field for 32bit

In general, use the 64-bit version.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/hardirq_32.h | 14 ++++++++++----
 arch/x86/include/asm/hardirq_64.h | 10 +++++-----
 2 files changed, 15 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
index a70ed050fde..e5a332c28c9 100644
--- a/arch/x86/include/asm/hardirq_32.h
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -14,6 +14,7 @@ typedef struct {
 	unsigned int irq_tlb_count;
 	unsigned int irq_thermal_count;
 	unsigned int irq_spurious_count;
+	unsigned int irq_threshold_count;
 } ____cacheline_aligned irq_cpustat_t;
 
 DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
@@ -22,11 +23,16 @@ DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
 #define MAX_HARDIRQS_PER_CPU NR_VECTORS
 
 #define __ARCH_IRQ_STAT
-#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
 
-#define inc_irq_stat(member)	(__get_cpu_var(irq_stat).member++)
+#define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
 
-void ack_bad_irq(unsigned int irq);
-#include <linux/irq_cpustat.h>
+#define local_softirq_pending()	percpu_read(irq_stat.__softirq_pending)
+
+#define __ARCH_SET_SOFTIRQ_PENDING
+
+#define set_softirq_pending(x)	percpu_write(irq_stat.__softirq_pending, (x))
+#define or_softirq_pending(x)	percpu_or(irq_stat.__softirq_pending, (x))
+
+extern void ack_bad_irq(unsigned int irq);
 
 #endif /* _ASM_X86_HARDIRQ_32_H */
diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
index 873c3c7bffc..392e7d61457 100644
--- a/arch/x86/include/asm/hardirq_64.h
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -22,16 +22,16 @@ DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
 /* We can have at most NR_VECTORS irqs routed to a cpu at a time */
 #define MAX_HARDIRQS_PER_CPU NR_VECTORS
 
-#define __ARCH_IRQ_STAT 1
+#define __ARCH_IRQ_STAT
 
 #define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
 
-#define local_softirq_pending() percpu_read(irq_stat.__softirq_pending)
+#define local_softirq_pending()	percpu_read(irq_stat.__softirq_pending)
 
-#define __ARCH_SET_SOFTIRQ_PENDING 1
+#define __ARCH_SET_SOFTIRQ_PENDING
 
-#define set_softirq_pending(x) percpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)  percpu_or(irq_stat.__softirq_pending, (x))
+#define set_softirq_pending(x)	percpu_write(irq_stat.__softirq_pending, (x))
+#define or_softirq_pending(x)	percpu_or(irq_stat.__softirq_pending, (x))
 
 extern void ack_bad_irq(unsigned int irq);
 
-- 
cgit v1.2.3


From 22da7b3df3a2e26a87a8581575dbf26e465a6ac7 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Fri, 23 Jan 2009 11:03:31 +0900
Subject: x86: merge hardirq_{32,64}.h into hardirq.h

Impact: cleanup

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/hardirq.h    | 43 ++++++++++++++++++++++++++++++++++-----
 arch/x86/include/asm/hardirq_32.h | 38 ----------------------------------
 arch/x86/include/asm/hardirq_64.h | 38 ----------------------------------
 3 files changed, 38 insertions(+), 81 deletions(-)
 delete mode 100644 arch/x86/include/asm/hardirq_32.h
 delete mode 100644 arch/x86/include/asm/hardirq_64.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 000787df66e..f4a95f20f8e 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -1,11 +1,44 @@
-#ifdef CONFIG_X86_32
-# include "hardirq_32.h"
-#else
-# include "hardirq_64.h"
-#endif
+#ifndef _ASM_X86_HARDIRQ_H
+#define _ASM_X86_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;	/* arch dependent */
+	unsigned int apic_timer_irqs;	/* arch dependent */
+	unsigned int irq0_irqs;
+	unsigned int irq_resched_count;
+	unsigned int irq_call_count;
+	unsigned int irq_tlb_count;
+	unsigned int irq_thermal_count;
+	unsigned int irq_spurious_count;
+	unsigned int irq_threshold_count;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+
+/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
+#define MAX_HARDIRQS_PER_CPU NR_VECTORS
+
+#define __ARCH_IRQ_STAT
+
+#define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
+
+#define local_softirq_pending()	percpu_read(irq_stat.__softirq_pending)
+
+#define __ARCH_SET_SOFTIRQ_PENDING
+
+#define set_softirq_pending(x)	percpu_write(irq_stat.__softirq_pending, (x))
+#define or_softirq_pending(x)	percpu_or(irq_stat.__softirq_pending, (x))
+
+extern void ack_bad_irq(unsigned int irq);
 
 extern u64 arch_irq_stat_cpu(unsigned int cpu);
 #define arch_irq_stat_cpu	arch_irq_stat_cpu
 
 extern u64 arch_irq_stat(void);
 #define arch_irq_stat		arch_irq_stat
+
+#endif /* _ASM_X86_HARDIRQ_H */
diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
deleted file mode 100644
index e5a332c28c9..00000000000
--- a/arch/x86/include/asm/hardirq_32.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_X86_HARDIRQ_32_H
-#define _ASM_X86_HARDIRQ_32_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned int __nmi_count;	/* arch dependent */
-	unsigned int apic_timer_irqs;	/* arch dependent */
-	unsigned int irq0_irqs;
-	unsigned int irq_resched_count;
-	unsigned int irq_call_count;
-	unsigned int irq_tlb_count;
-	unsigned int irq_thermal_count;
-	unsigned int irq_spurious_count;
-	unsigned int irq_threshold_count;
-} ____cacheline_aligned irq_cpustat_t;
-
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
-
-/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
-#define MAX_HARDIRQS_PER_CPU NR_VECTORS
-
-#define __ARCH_IRQ_STAT
-
-#define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
-
-#define local_softirq_pending()	percpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
-
-#define set_softirq_pending(x)	percpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)	percpu_or(irq_stat.__softirq_pending, (x))
-
-extern void ack_bad_irq(unsigned int irq);
-
-#endif /* _ASM_X86_HARDIRQ_32_H */
diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
deleted file mode 100644
index 392e7d61457..00000000000
--- a/arch/x86/include/asm/hardirq_64.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_X86_HARDIRQ_64_H
-#define _ASM_X86_HARDIRQ_64_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned int __nmi_count;	/* arch dependent */
-	unsigned int apic_timer_irqs;	/* arch dependent */
-	unsigned int irq0_irqs;
-	unsigned int irq_resched_count;
-	unsigned int irq_call_count;
-	unsigned int irq_tlb_count;
-	unsigned int irq_thermal_count;
-	unsigned int irq_spurious_count;
-	unsigned int irq_threshold_count;
-} ____cacheline_aligned irq_cpustat_t;
-
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
-
-/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
-#define MAX_HARDIRQS_PER_CPU NR_VECTORS
-
-#define __ARCH_IRQ_STAT
-
-#define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
-
-#define local_softirq_pending()	percpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
-
-#define set_softirq_pending(x)	percpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)	percpu_or(irq_stat.__softirq_pending, (x))
-
-extern void ack_bad_irq(unsigned int irq);
-
-#endif /* _ASM_X86_HARDIRQ_64_H */
-- 
cgit v1.2.3


From 2de3a5f7956eb81447feea3aec68193ddd8534bb Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Fri, 23 Jan 2009 11:03:32 +0900
Subject: x86: make irq_cpustat_t fields conditional

Impact: shrink size of irq_cpustat_t when possible

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/hardirq.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index f4a95f20f8e..176f058e715 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -7,14 +7,22 @@
 typedef struct {
 	unsigned int __softirq_pending;
 	unsigned int __nmi_count;	/* arch dependent */
-	unsigned int apic_timer_irqs;	/* arch dependent */
 	unsigned int irq0_irqs;
+#ifdef CONFIG_X86_LOCAL_APIC
+	unsigned int apic_timer_irqs;	/* arch dependent */
+	unsigned int irq_spurious_count;
+#endif
+#ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
 	unsigned int irq_call_count;
 	unsigned int irq_tlb_count;
+#endif
+#ifdef CONFIG_X86_MCE
 	unsigned int irq_thermal_count;
-	unsigned int irq_spurious_count;
+# ifdef CONFIG_X86_64
 	unsigned int irq_threshold_count;
+# endif
+#endif
 } ____cacheline_aligned irq_cpustat_t;
 
 DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
-- 
cgit v1.2.3


From 99d0000f710f3432182761f65f9658f1cf0bf455 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 23 Jan 2009 11:09:15 +0100
Subject: x86, xen: fix hardirq.h merge fallout

Impact: build fix

This build error:

 arch/x86/xen/suspend.c:22: error: implicit declaration of function 'fix_to_virt'
 arch/x86/xen/suspend.c:22: error: 'FIX_PARAVIRT_BOOTMAP' undeclared (first use in this function)
 arch/x86/xen/suspend.c:22: error: (Each undeclared identifier is reported only once
 arch/x86/xen/suspend.c:22: error: for each function it appears in.)

triggers because the hardirq.h unification removed an implicit fixmap.h
include - on which arch/x86/xen/suspend.c depended. Add the fixmap.h
include explicitly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/suspend.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 212ffe012b7..95be7b43472 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -6,6 +6,7 @@
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/page.h>
+#include <asm/fixmap.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
-- 
cgit v1.2.3


From fe40c0af3cff3ea461cf25bddb979abc7279d4df Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 23 Jan 2009 15:49:41 -0800
Subject: x86: uaccess: introduce try and catch framework

Impact: introduce new uaccess exception handling framework

Introduce {get|put}_user_try and {get|put}_user_catch as new uaccess exception
handling framework.
{get|put}_user_try begins exception block and {get|put}_user_catch(err) ends
the block and gets err if an exception occured in {get|put}_user_ex() in the
block. The exception is stored thread_info->uaccess_err.

The example usage of this framework is below;
int func()
{
	int err = 0;

	get_user_try {
		get_user_ex(...);
		get_user_ex(...);
		:
	} get_user_catch(err);

	return err;
}

Note: get_user_ex() is not clear the value when an exception occurs, it's
different from the behavior of __get_user(), but I think it doesn't matter.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/thread_info.h |   1 +
 arch/x86/include/asm/uaccess.h     | 103 +++++++++++++++++++++++++++++++++++++
 arch/x86/mm/extable.c              |   6 +++
 3 files changed, 110 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 98789647baa..3f90aeb456b 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -40,6 +40,7 @@ struct thread_info {
 						*/
 	__u8			supervisor_stack[0];
 #endif
+	int			uaccess_err;
 };
 
 #define INIT_THREAD_INFO(tsk)			\
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 69d2757cca9..0ec6de4bcb0 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -199,12 +199,22 @@ extern int __get_user_bad(void);
 		     : "=r" (err)					\
 		     : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
 
+#define __put_user_asm_ex_u64(x, addr)					\
+	asm volatile("1:	movl %%eax,0(%1)\n"			\
+		     "2:	movl %%edx,4(%1)\n"			\
+		     "3:\n"						\
+		     _ASM_EXTABLE(1b, 2b - 1b)				\
+		     _ASM_EXTABLE(2b, 3b - 2b)				\
+		     : : "A" (x), "r" (addr))
+
 #define __put_user_x8(x, ptr, __ret_pu)				\
 	asm volatile("call __put_user_8" : "=a" (__ret_pu)	\
 		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
 #define __put_user_asm_u64(x, ptr, retval) \
 	__put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_asm_ex_u64(x, addr)	\
+	__put_user_asm_ex(x, addr, "q", "", "Zr")
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
 #endif
 
@@ -286,6 +296,27 @@ do {									\
 	}								\
 } while (0)
 
+#define __put_user_size_ex(x, ptr, size)				\
+do {									\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1:								\
+		__put_user_asm_ex(x, ptr, "b", "b", "iq");		\
+		break;							\
+	case 2:								\
+		__put_user_asm_ex(x, ptr, "w", "w", "ir");		\
+		break;							\
+	case 4:								\
+		__put_user_asm_ex(x, ptr, "l", "k", "ir");		\
+		break;							\
+	case 8:								\
+		__put_user_asm_ex_u64((__typeof__(*ptr))(x), ptr);	\
+		break;							\
+	default:							\
+		__put_user_bad();					\
+	}								\
+} while (0)
+
 #else
 
 #define __put_user_size(x, ptr, size, retval, errret)			\
@@ -311,9 +342,12 @@ do {									\
 
 #ifdef CONFIG_X86_32
 #define __get_user_asm_u64(x, ptr, retval, errret)	(x) = __get_user_bad()
+#define __get_user_asm_ex_u64(x, ptr)			(x) = __get_user_bad()
 #else
 #define __get_user_asm_u64(x, ptr, retval, errret) \
 	 __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
+#define __get_user_asm_ex_u64(x, ptr) \
+	 __get_user_asm_ex(x, ptr, "q", "", "=r")
 #endif
 
 #define __get_user_size(x, ptr, size, retval, errret)			\
@@ -350,6 +384,33 @@ do {									\
 		     : "=r" (err), ltype(x)				\
 		     : "m" (__m(addr)), "i" (errret), "0" (err))
 
+#define __get_user_size_ex(x, ptr, size)				\
+do {									\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	case 1:								\
+		__get_user_asm_ex(x, ptr, "b", "b", "=q");		\
+		break;							\
+	case 2:								\
+		__get_user_asm_ex(x, ptr, "w", "w", "=r");		\
+		break;							\
+	case 4:								\
+		__get_user_asm_ex(x, ptr, "l", "k", "=r");		\
+		break;							\
+	case 8:								\
+		__get_user_asm_ex_u64(x, ptr);				\
+		break;							\
+	default:							\
+		(x) = __get_user_bad();					\
+	}								\
+} while (0)
+
+#define __get_user_asm_ex(x, addr, itype, rtype, ltype)			\
+	asm volatile("1:	mov"itype" %1,%"rtype"0\n"		\
+		     "2:\n"						\
+		     _ASM_EXTABLE(1b, 2b - 1b)				\
+		     : ltype(x) : "m" (__m(addr)))
+
 #define __put_user_nocheck(x, ptr, size)			\
 ({								\
 	int __pu_err;						\
@@ -385,6 +446,26 @@ struct __large_struct { unsigned long buf[100]; };
 		     _ASM_EXTABLE(1b, 3b)				\
 		     : "=r"(err)					\
 		     : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
+
+#define __put_user_asm_ex(x, addr, itype, rtype, ltype)			\
+	asm volatile("1:	mov"itype" %"rtype"0,%1\n"		\
+		     "2:\n"						\
+		     _ASM_EXTABLE(1b, 2b - 1b)				\
+		     : : ltype(x), "m" (__m(addr)))
+
+/*
+ * uaccess_try and catch
+ */
+#define uaccess_try	do {						\
+	int prev_err = current_thread_info()->uaccess_err;		\
+	current_thread_info()->uaccess_err = 0;				\
+	barrier();
+
+#define uaccess_catch(err)						\
+	(err) |= current_thread_info()->uaccess_err;			\
+	current_thread_info()->uaccess_err = prev_err;			\
+} while (0)
+
 /**
  * __get_user: - Get a simple variable from user space, with less checking.
  * @x:   Variable to store result.
@@ -408,6 +489,7 @@ struct __large_struct { unsigned long buf[100]; };
 
 #define __get_user(x, ptr)						\
 	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
 /**
  * __put_user: - Write a simple value into user space, with less checking.
  * @x:   Value to copy to user space.
@@ -434,6 +516,27 @@ struct __large_struct { unsigned long buf[100]; };
 #define __get_user_unaligned __get_user
 #define __put_user_unaligned __put_user
 
+/*
+ * {get|put}_user_try and catch
+ *
+ * get_user_try {
+ *	get_user_ex(...);
+ * } get_user_catch(err)
+ */
+#define get_user_try		uaccess_try
+#define get_user_catch(err)	uaccess_catch(err)
+#define put_user_try		uaccess_try
+#define put_user_catch(err)	uaccess_catch(err)
+
+#define get_user_ex(x, ptr)	do {					\
+	unsigned long __gue_val;					\
+	__get_user_size_ex((__gue_val), (ptr), (sizeof(*(ptr))));	\
+	(x) = (__force __typeof__(*(ptr)))__gue_val;			\
+} while (0)
+
+#define put_user_ex(x, ptr)						\
+	__put_user_size_ex((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
 /*
  * movsl can be slow when source and dest are not both 8-byte aligned
  */
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index 7e8db53528a..61b41ca3b5a 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -23,6 +23,12 @@ int fixup_exception(struct pt_regs *regs)
 
 	fixup = search_exception_tables(regs->ip);
 	if (fixup) {
+		/* If fixup is less than 16, it means uaccess error */
+		if (fixup->fixup < 16) {
+			current_thread_info()->uaccess_err = -EFAULT;
+			regs->ip += fixup->fixup;
+			return 1;
+		}
 		regs->ip = fixup->fixup;
 		return 1;
 	}
-- 
cgit v1.2.3


From 98e3d45edad207b4358948d6e2cac4e482c3bb5d Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 23 Jan 2009 15:50:10 -0800
Subject: x86: signal: use {get|put}_user_try and catch

Impact: use new framework

Use {get|put}_user_try, catch, and _ex in arch/x86/kernel/signal.c.

Note: this patch contains "WARNING: line over 80 characters", because when
introducing new block I insert an indent to avoid mistakes by edit.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/signal.c | 291 +++++++++++++++++++++++++----------------------
 1 file changed, 154 insertions(+), 137 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 89bb7668041..cf34eb37fbe 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -51,24 +51,24 @@
 #endif
 
 #define COPY(x)			{		\
-	err |= __get_user(regs->x, &sc->x);	\
+	get_user_ex(regs->x, &sc->x);		\
 }
 
 #define COPY_SEG(seg)		{			\
 		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
+		get_user_ex(tmp, &sc->seg);		\
 		regs->seg = tmp;			\
 }
 
 #define COPY_SEG_CPL3(seg)	{			\
 		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
+		get_user_ex(tmp, &sc->seg);		\
 		regs->seg = tmp | 3;			\
 }
 
 #define GET_SEG(seg)		{			\
 		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
+		get_user_ex(tmp, &sc->seg);		\
 		loadsegment(seg, tmp);			\
 }
 
@@ -83,45 +83,49 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
+	get_user_try {
+
 #ifdef CONFIG_X86_32
-	GET_SEG(gs);
-	COPY_SEG(fs);
-	COPY_SEG(es);
-	COPY_SEG(ds);
+		GET_SEG(gs);
+		COPY_SEG(fs);
+		COPY_SEG(es);
+		COPY_SEG(ds);
 #endif /* CONFIG_X86_32 */
 
-	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
-	COPY(dx); COPY(cx); COPY(ip);
+		COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
+		COPY(dx); COPY(cx); COPY(ip);
 
 #ifdef CONFIG_X86_64
-	COPY(r8);
-	COPY(r9);
-	COPY(r10);
-	COPY(r11);
-	COPY(r12);
-	COPY(r13);
-	COPY(r14);
-	COPY(r15);
+		COPY(r8);
+		COPY(r9);
+		COPY(r10);
+		COPY(r11);
+		COPY(r12);
+		COPY(r13);
+		COPY(r14);
+		COPY(r15);
 #endif /* CONFIG_X86_64 */
 
 #ifdef CONFIG_X86_32
-	COPY_SEG_CPL3(cs);
-	COPY_SEG_CPL3(ss);
+		COPY_SEG_CPL3(cs);
+		COPY_SEG_CPL3(ss);
 #else /* !CONFIG_X86_32 */
-	/* Kernel saves and restores only the CS segment register on signals,
-	 * which is the bare minimum needed to allow mixed 32/64-bit code.
-	 * App's signal handler can save/restore other segments if needed. */
-	COPY_SEG_CPL3(cs);
+		/* Kernel saves and restores only the CS segment register on signals,
+		 * which is the bare minimum needed to allow mixed 32/64-bit code.
+		 * App's signal handler can save/restore other segments if needed. */
+		COPY_SEG_CPL3(cs);
 #endif /* CONFIG_X86_32 */
 
-	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
-	regs->orig_ax = -1;		/* disable syscall checks */
+		get_user_ex(tmpflags, &sc->flags);
+		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+		regs->orig_ax = -1;		/* disable syscall checks */
+
+		get_user_ex(buf, &sc->fpstate);
+		err |= restore_i387_xstate(buf);
 
-	err |= __get_user(buf, &sc->fpstate);
-	err |= restore_i387_xstate(buf);
+		get_user_ex(*pax, &sc->ax);
+	} get_user_catch(err);
 
-	err |= __get_user(*pax, &sc->ax);
 	return err;
 }
 
@@ -131,57 +135,60 @@ setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 {
 	int err = 0;
 
+	put_user_try {
+
 #ifdef CONFIG_X86_32
-	{
-		unsigned int tmp;
+		{
+			unsigned int tmp;
 
-		savesegment(gs, tmp);
-		err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-	}
-	err |= __put_user(regs->fs, (unsigned int __user *)&sc->fs);
-	err |= __put_user(regs->es, (unsigned int __user *)&sc->es);
-	err |= __put_user(regs->ds, (unsigned int __user *)&sc->ds);
+			savesegment(gs, tmp);
+			put_user_ex(tmp, (unsigned int __user *)&sc->gs);
+		}
+		put_user_ex(regs->fs, (unsigned int __user *)&sc->fs);
+		put_user_ex(regs->es, (unsigned int __user *)&sc->es);
+		put_user_ex(regs->ds, (unsigned int __user *)&sc->ds);
 #endif /* CONFIG_X86_32 */
 
-	err |= __put_user(regs->di, &sc->di);
-	err |= __put_user(regs->si, &sc->si);
-	err |= __put_user(regs->bp, &sc->bp);
-	err |= __put_user(regs->sp, &sc->sp);
-	err |= __put_user(regs->bx, &sc->bx);
-	err |= __put_user(regs->dx, &sc->dx);
-	err |= __put_user(regs->cx, &sc->cx);
-	err |= __put_user(regs->ax, &sc->ax);
+		put_user_ex(regs->di, &sc->di);
+		put_user_ex(regs->si, &sc->si);
+		put_user_ex(regs->bp, &sc->bp);
+		put_user_ex(regs->sp, &sc->sp);
+		put_user_ex(regs->bx, &sc->bx);
+		put_user_ex(regs->dx, &sc->dx);
+		put_user_ex(regs->cx, &sc->cx);
+		put_user_ex(regs->ax, &sc->ax);
 #ifdef CONFIG_X86_64
-	err |= __put_user(regs->r8, &sc->r8);
-	err |= __put_user(regs->r9, &sc->r9);
-	err |= __put_user(regs->r10, &sc->r10);
-	err |= __put_user(regs->r11, &sc->r11);
-	err |= __put_user(regs->r12, &sc->r12);
-	err |= __put_user(regs->r13, &sc->r13);
-	err |= __put_user(regs->r14, &sc->r14);
-	err |= __put_user(regs->r15, &sc->r15);
+		put_user_ex(regs->r8, &sc->r8);
+		put_user_ex(regs->r9, &sc->r9);
+		put_user_ex(regs->r10, &sc->r10);
+		put_user_ex(regs->r11, &sc->r11);
+		put_user_ex(regs->r12, &sc->r12);
+		put_user_ex(regs->r13, &sc->r13);
+		put_user_ex(regs->r14, &sc->r14);
+		put_user_ex(regs->r15, &sc->r15);
 #endif /* CONFIG_X86_64 */
 
-	err |= __put_user(current->thread.trap_no, &sc->trapno);
-	err |= __put_user(current->thread.error_code, &sc->err);
-	err |= __put_user(regs->ip, &sc->ip);
+		put_user_ex(current->thread.trap_no, &sc->trapno);
+		put_user_ex(current->thread.error_code, &sc->err);
+		put_user_ex(regs->ip, &sc->ip);
 #ifdef CONFIG_X86_32
-	err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
-	err |= __put_user(regs->flags, &sc->flags);
-	err |= __put_user(regs->sp, &sc->sp_at_signal);
-	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
+		put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
+		put_user_ex(regs->flags, &sc->flags);
+		put_user_ex(regs->sp, &sc->sp_at_signal);
+		put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
 #else /* !CONFIG_X86_32 */
-	err |= __put_user(regs->flags, &sc->flags);
-	err |= __put_user(regs->cs, &sc->cs);
-	err |= __put_user(0, &sc->gs);
-	err |= __put_user(0, &sc->fs);
+		put_user_ex(regs->flags, &sc->flags);
+		put_user_ex(regs->cs, &sc->cs);
+		put_user_ex(0, &sc->gs);
+		put_user_ex(0, &sc->fs);
 #endif /* CONFIG_X86_32 */
 
-	err |= __put_user(fpstate, &sc->fpstate);
+		put_user_ex(fpstate, &sc->fpstate);
 
-	/* non-iBCS2 extensions.. */
-	err |= __put_user(mask, &sc->oldmask);
-	err |= __put_user(current->thread.cr2, &sc->cr2);
+		/* non-iBCS2 extensions.. */
+		put_user_ex(mask, &sc->oldmask);
+		put_user_ex(current->thread.cr2, &sc->cr2);
+	} put_user_catch(err);
 
 	return err;
 }
@@ -336,43 +343,41 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
 
-	err |= __put_user(sig, &frame->sig);
-	err |= __put_user(&frame->info, &frame->pinfo);
-	err |= __put_user(&frame->uc, &frame->puc);
-	err |= copy_siginfo_to_user(&frame->info, info);
-	if (err)
-		return -EFAULT;
-
-	/* Create the ucontext.  */
-	if (cpu_has_xsave)
-		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
-	else
-		err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->sp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-				regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		return -EFAULT;
+	put_user_try {
+		put_user_ex(sig, &frame->sig);
+		put_user_ex(&frame->info, &frame->pinfo);
+		put_user_ex(&frame->uc, &frame->puc);
+		err |= copy_siginfo_to_user(&frame->info, info);
 
-	/* Set up to return from userspace.  */
-	restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
-	if (ka->sa.sa_flags & SA_RESTORER)
-		restorer = ka->sa.sa_restorer;
-	err |= __put_user(restorer, &frame->pretcode);
+		/* Create the ucontext.  */
+		if (cpu_has_xsave)
+			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
+		else
+			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(0, &frame->uc.uc_link);
+		put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+		put_user_ex(sas_ss_flags(regs->sp),
+			    &frame->uc.uc_stack.ss_flags);
+		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+		err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+					regs, set->sig[0]);
+		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+		/* Set up to return from userspace.  */
+		restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
+		if (ka->sa.sa_flags & SA_RESTORER)
+			restorer = ka->sa.sa_restorer;
+		put_user_ex(restorer, &frame->pretcode);
 
-	/*
-	 * This is movl $__NR_rt_sigreturn, %ax ; int $0x80
-	 *
-	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
-	 * reasons and because gdb uses it as a signature to notice
-	 * signal handler stack frames.
-	 */
-	err |= __put_user(*((u64 *)&rt_retcode), (u64 *)frame->retcode);
+		/*
+		 * This is movl $__NR_rt_sigreturn, %ax ; int $0x80
+		 *
+		 * WE DO NOT USE IT ANY MORE! It's only left here for historical
+		 * reasons and because gdb uses it as a signature to notice
+		 * signal handler stack frames.
+		 */
+		put_user_ex(*((u64 *)&rt_retcode), (u64 *)frame->retcode);
+	} put_user_catch(err);
 
 	if (err)
 		return -EFAULT;
@@ -436,28 +441,30 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			return -EFAULT;
 	}
 
-	/* Create the ucontext.  */
-	if (cpu_has_xsave)
-		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
-	else
-		err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->sp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	/* x86-64 should always use SA_RESTORER. */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
-	} else {
-		/* could use a vstub here */
-		return -EFAULT;
-	}
+	put_user_try {
+		/* Create the ucontext.  */
+		if (cpu_has_xsave)
+			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
+		else
+			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(0, &frame->uc.uc_link);
+		put_user_ex(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+		put_user_ex(sas_ss_flags(regs->sp),
+			    &frame->uc.uc_stack.ss_flags);
+		put_user_ex(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
+		err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
+		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+		/* Set up to return from userspace.  If provided, use a stub
+		   already in userspace.  */
+		/* x86-64 should always use SA_RESTORER. */
+		if (ka->sa.sa_flags & SA_RESTORER) {
+			put_user_ex(ka->sa.sa_restorer, &frame->pretcode);
+		} else {
+			/* could use a vstub here */
+			err |= -EFAULT;
+		}
+	} put_user_catch(err);
 
 	if (err)
 		return -EFAULT;
@@ -509,31 +516,41 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 	      struct old_sigaction __user *oact)
 {
 	struct k_sigaction new_ka, old_ka;
-	int ret;
+	int ret = 0;
 
 	if (act) {
 		old_sigset_t mask;
 
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
 			return -EFAULT;
 
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
+		get_user_try {
+			get_user_ex(new_ka.sa.sa_handler, &act->sa_handler);
+			get_user_ex(new_ka.sa.sa_flags, &act->sa_flags);
+			get_user_ex(mask, &act->sa_mask);
+			get_user_ex(new_ka.sa.sa_restorer, &act->sa_restorer);
+		} get_user_catch(ret);
+
+		if (ret)
+			return -EFAULT;
 		siginitset(&new_ka.sa.sa_mask, mask);
 	}
 
 	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
 
 	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
 			return -EFAULT;
 
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+		put_user_try {
+			put_user_ex(old_ka.sa.sa_handler, &oact->sa_handler);
+			put_user_ex(old_ka.sa.sa_flags, &oact->sa_flags);
+			put_user_ex(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+			put_user_ex(old_ka.sa.sa_restorer, &oact->sa_restorer);
+		} put_user_catch(ret);
+
+		if (ret)
+			return -EFAULT;
 	}
 
 	return ret;
-- 
cgit v1.2.3


From 3b4b75700a245d0d48fc52a4d2f67d3155812aba Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 23 Jan 2009 15:50:38 -0800
Subject: x86: ia32_signal: use {get|put}_user_try and catch

Impact: use new framework

Use {get|put}_user_try, catch, and _ex in arch/x86/ia32/ia32_signal.c.

Note: this patch contains "WARNING: line over 80 characters", because when
introducing new block I insert an indent to avoid mistakes by edit.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/ia32/ia32_signal.c | 365 +++++++++++++++++++++++---------------------
 1 file changed, 195 insertions(+), 170 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 9dabd00e980..dd77ac0cac4 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -46,78 +46,83 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
-	int err;
+	int err = 0;
 
 	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
-	/* If you change siginfo_t structure, please make sure that
-	   this code is fixed accordingly.
-	   It should never copy any pad contained in the structure
-	   to avoid security leaks, but must copy the generic
-	   3 ints plus the relevant union member.  */
-	err = __put_user(from->si_signo, &to->si_signo);
-	err |= __put_user(from->si_errno, &to->si_errno);
-	err |= __put_user((short)from->si_code, &to->si_code);
-
-	if (from->si_code < 0) {
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
-	} else {
-		/*
-		 * First 32bits of unions are always present:
-		 * si_pid === si_band === si_tid === si_addr(LS half)
-		 */
-		err |= __put_user(from->_sifields._pad[0],
-				  &to->_sifields._pad[0]);
-		switch (from->si_code >> 16) {
-		case __SI_FAULT >> 16:
-			break;
-		case __SI_CHLD >> 16:
-			err |= __put_user(from->si_utime, &to->si_utime);
-			err |= __put_user(from->si_stime, &to->si_stime);
-			err |= __put_user(from->si_status, &to->si_status);
-			/* FALL THROUGH */
-		default:
-		case __SI_KILL >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			break;
-		case __SI_POLL >> 16:
-			err |= __put_user(from->si_fd, &to->si_fd);
-			break;
-		case __SI_TIMER >> 16:
-			err |= __put_user(from->si_overrun, &to->si_overrun);
-			err |= __put_user(ptr_to_compat(from->si_ptr),
-					  &to->si_ptr);
-			break;
-			 /* This is not generated by the kernel as of now.  */
-		case __SI_RT >> 16:
-		case __SI_MESGQ >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			err |= __put_user(from->si_int, &to->si_int);
-			break;
+	put_user_try {
+		/* If you change siginfo_t structure, please make sure that
+		   this code is fixed accordingly.
+		   It should never copy any pad contained in the structure
+		   to avoid security leaks, but must copy the generic
+		   3 ints plus the relevant union member.  */
+		put_user_ex(from->si_signo, &to->si_signo);
+		put_user_ex(from->si_errno, &to->si_errno);
+		put_user_ex((short)from->si_code, &to->si_code);
+
+		if (from->si_code < 0) {
+			put_user_ex(from->si_pid, &to->si_pid);
+			put_user_ex(from->si_uid, &to->si_uid);
+			put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr);
+		} else {
+			/*
+			 * First 32bits of unions are always present:
+			 * si_pid === si_band === si_tid === si_addr(LS half)
+			 */
+			put_user_ex(from->_sifields._pad[0],
+					  &to->_sifields._pad[0]);
+			switch (from->si_code >> 16) {
+			case __SI_FAULT >> 16:
+				break;
+			case __SI_CHLD >> 16:
+				put_user_ex(from->si_utime, &to->si_utime);
+				put_user_ex(from->si_stime, &to->si_stime);
+				put_user_ex(from->si_status, &to->si_status);
+				/* FALL THROUGH */
+			default:
+			case __SI_KILL >> 16:
+				put_user_ex(from->si_uid, &to->si_uid);
+				break;
+			case __SI_POLL >> 16:
+				put_user_ex(from->si_fd, &to->si_fd);
+				break;
+			case __SI_TIMER >> 16:
+				put_user_ex(from->si_overrun, &to->si_overrun);
+				put_user_ex(ptr_to_compat(from->si_ptr),
+					    &to->si_ptr);
+				break;
+				 /* This is not generated by the kernel as of now.  */
+			case __SI_RT >> 16:
+			case __SI_MESGQ >> 16:
+				put_user_ex(from->si_uid, &to->si_uid);
+				put_user_ex(from->si_int, &to->si_int);
+				break;
+			}
 		}
-	}
+	} put_user_catch(err);
+
 	return err;
 }
 
 int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 {
-	int err;
+	int err = 0;
 	u32 ptr32;
 
 	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
 		return -EFAULT;
 
-	err = __get_user(to->si_signo, &from->si_signo);
-	err |= __get_user(to->si_errno, &from->si_errno);
-	err |= __get_user(to->si_code, &from->si_code);
+	get_user_try {
+		get_user_ex(to->si_signo, &from->si_signo);
+		get_user_ex(to->si_errno, &from->si_errno);
+		get_user_ex(to->si_code, &from->si_code);
 
-	err |= __get_user(to->si_pid, &from->si_pid);
-	err |= __get_user(to->si_uid, &from->si_uid);
-	err |= __get_user(ptr32, &from->si_ptr);
-	to->si_ptr = compat_ptr(ptr32);
+		get_user_ex(to->si_pid, &from->si_pid);
+		get_user_ex(to->si_uid, &from->si_uid);
+		get_user_ex(ptr32, &from->si_ptr);
+		to->si_ptr = compat_ptr(ptr32);
+	} get_user_catch(err);
 
 	return err;
 }
@@ -142,17 +147,23 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 				  struct pt_regs *regs)
 {
 	stack_t uss, uoss;
-	int ret;
+	int ret, err = 0;
 	mm_segment_t seg;
 
 	if (uss_ptr) {
 		u32 ptr;
 
 		memset(&uss, 0, sizeof(stack_t));
-		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)) ||
-			    __get_user(ptr, &uss_ptr->ss_sp) ||
-			    __get_user(uss.ss_flags, &uss_ptr->ss_flags) ||
-			    __get_user(uss.ss_size, &uss_ptr->ss_size))
+		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)))
+			return -EFAULT;
+
+		get_user_try {
+			get_user_ex(ptr, &uss_ptr->ss_sp);
+			get_user_ex(uss.ss_flags, &uss_ptr->ss_flags);
+			get_user_ex(uss.ss_size, &uss_ptr->ss_size);
+		} get_user_catch(err);
+
+		if (err)
 			return -EFAULT;
 		uss.ss_sp = compat_ptr(ptr);
 	}
@@ -161,10 +172,16 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 	ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->sp);
 	set_fs(seg);
 	if (ret >= 0 && uoss_ptr)  {
-		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)) ||
-		    __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) ||
-		    __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
-		    __put_user(uoss.ss_size, &uoss_ptr->ss_size))
+		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)))
+			return -EFAULT;
+
+		put_user_try {
+			put_user_ex(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp);
+			put_user_ex(uoss.ss_flags, &uoss_ptr->ss_flags);
+			put_user_ex(uoss.ss_size, &uoss_ptr->ss_size);
+		} put_user_catch(err);
+
+		if (err)
 			ret = -EFAULT;
 	}
 	return ret;
@@ -174,18 +191,18 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
  * Do a signal return; undo the signal stack.
  */
 #define COPY(x)			{		\
-	err |= __get_user(regs->x, &sc->x);	\
+	get_user_ex(regs->x, &sc->x);		\
 }
 
 #define COPY_SEG_CPL3(seg)	{			\
 		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
+		get_user_ex(tmp, &sc->seg);		\
 		regs->seg = tmp | 3;			\
 }
 
 #define RELOAD_SEG(seg)		{		\
 	unsigned int cur, pre;			\
-	err |= __get_user(pre, &sc->seg);	\
+	get_user_ex(pre, &sc->seg);		\
 	savesegment(seg, cur);			\
 	pre |= 3;				\
 	if (pre != cur)				\
@@ -209,39 +226,42 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	       sc, sc->err, sc->ip, sc->cs, sc->flags);
 #endif
 
-	/*
-	 * Reload fs and gs if they have changed in the signal
-	 * handler.  This does not handle long fs/gs base changes in
-	 * the handler, but does not clobber them at least in the
-	 * normal case.
-	 */
-	err |= __get_user(gs, &sc->gs);
-	gs |= 3;
-	savesegment(gs, oldgs);
-	if (gs != oldgs)
-		load_gs_index(gs);
-
-	RELOAD_SEG(fs);
-	RELOAD_SEG(ds);
-	RELOAD_SEG(es);
-
-	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
-	COPY(dx); COPY(cx); COPY(ip);
-	/* Don't touch extended registers */
-
-	COPY_SEG_CPL3(cs);
-	COPY_SEG_CPL3(ss);
-
-	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
-	/* disable syscall checks */
-	regs->orig_ax = -1;
-
-	err |= __get_user(tmp, &sc->fpstate);
-	buf = compat_ptr(tmp);
-	err |= restore_i387_xstate_ia32(buf);
-
-	err |= __get_user(*pax, &sc->ax);
+	get_user_try {
+		/*
+		 * Reload fs and gs if they have changed in the signal
+		 * handler.  This does not handle long fs/gs base changes in
+		 * the handler, but does not clobber them at least in the
+		 * normal case.
+		 */
+		get_user_ex(gs, &sc->gs);
+		gs |= 3;
+		savesegment(gs, oldgs);
+		if (gs != oldgs)
+			load_gs_index(gs);
+
+		RELOAD_SEG(fs);
+		RELOAD_SEG(ds);
+		RELOAD_SEG(es);
+
+		COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
+		COPY(dx); COPY(cx); COPY(ip);
+		/* Don't touch extended registers */
+
+		COPY_SEG_CPL3(cs);
+		COPY_SEG_CPL3(ss);
+
+		get_user_ex(tmpflags, &sc->flags);
+		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+		/* disable syscall checks */
+		regs->orig_ax = -1;
+
+		get_user_ex(tmp, &sc->fpstate);
+		buf = compat_ptr(tmp);
+		err |= restore_i387_xstate_ia32(buf);
+
+		get_user_ex(*pax, &sc->ax);
+	} get_user_catch(err);
+
 	return err;
 }
 
@@ -319,36 +339,38 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
 {
 	int tmp, err = 0;
 
-	savesegment(gs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
-	savesegment(fs, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
-	savesegment(ds, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->ds);
-	savesegment(es, tmp);
-	err |= __put_user(tmp, (unsigned int __user *)&sc->es);
-
-	err |= __put_user(regs->di, &sc->di);
-	err |= __put_user(regs->si, &sc->si);
-	err |= __put_user(regs->bp, &sc->bp);
-	err |= __put_user(regs->sp, &sc->sp);
-	err |= __put_user(regs->bx, &sc->bx);
-	err |= __put_user(regs->dx, &sc->dx);
-	err |= __put_user(regs->cx, &sc->cx);
-	err |= __put_user(regs->ax, &sc->ax);
-	err |= __put_user(current->thread.trap_no, &sc->trapno);
-	err |= __put_user(current->thread.error_code, &sc->err);
-	err |= __put_user(regs->ip, &sc->ip);
-	err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs);
-	err |= __put_user(regs->flags, &sc->flags);
-	err |= __put_user(regs->sp, &sc->sp_at_signal);
-	err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
-
-	err |= __put_user(ptr_to_compat(fpstate), &sc->fpstate);
-
-	/* non-iBCS2 extensions.. */
-	err |= __put_user(mask, &sc->oldmask);
-	err |= __put_user(current->thread.cr2, &sc->cr2);
+	put_user_try {
+		savesegment(gs, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->gs);
+		savesegment(fs, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->fs);
+		savesegment(ds, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->ds);
+		savesegment(es, tmp);
+		put_user_ex(tmp, (unsigned int __user *)&sc->es);
+
+		put_user_ex(regs->di, &sc->di);
+		put_user_ex(regs->si, &sc->si);
+		put_user_ex(regs->bp, &sc->bp);
+		put_user_ex(regs->sp, &sc->sp);
+		put_user_ex(regs->bx, &sc->bx);
+		put_user_ex(regs->dx, &sc->dx);
+		put_user_ex(regs->cx, &sc->cx);
+		put_user_ex(regs->ax, &sc->ax);
+		put_user_ex(current->thread.trap_no, &sc->trapno);
+		put_user_ex(current->thread.error_code, &sc->err);
+		put_user_ex(regs->ip, &sc->ip);
+		put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
+		put_user_ex(regs->flags, &sc->flags);
+		put_user_ex(regs->sp, &sc->sp_at_signal);
+		put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
+
+		put_user_ex(ptr_to_compat(fpstate), &sc->fpstate);
+
+		/* non-iBCS2 extensions.. */
+		put_user_ex(mask, &sc->oldmask);
+		put_user_ex(current->thread.cr2, &sc->cr2);
+	} put_user_catch(err);
 
 	return err;
 }
@@ -437,13 +459,17 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		else
 			restorer = &frame->retcode;
 	}
-	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
 
-	/*
-	 * These are actually not used anymore, but left because some
-	 * gdb versions depend on them as a marker.
-	 */
-	err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode);
+	put_user_try {
+		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
+
+		/*
+		 * These are actually not used anymore, but left because some
+		 * gdb versions depend on them as a marker.
+		 */
+		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+	} put_user_catch(err);
+
 	if (err)
 		return -EFAULT;
 
@@ -496,41 +522,40 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
 
-	err |= __put_user(sig, &frame->sig);
-	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
-	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
-	err |= copy_siginfo_to_user32(&frame->info, info);
-	if (err)
-		return -EFAULT;
+	put_user_try {
+		put_user_ex(sig, &frame->sig);
+		put_user_ex(ptr_to_compat(&frame->info), &frame->pinfo);
+		put_user_ex(ptr_to_compat(&frame->uc), &frame->puc);
+		err |= copy_siginfo_to_user32(&frame->info, info);
 
-	/* Create the ucontext.  */
-	if (cpu_has_xsave)
-		err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
-	else
-		err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->sp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
-				     regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		return -EFAULT;
+		/* Create the ucontext.  */
+		if (cpu_has_xsave)
+			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
+		else
+			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(0, &frame->uc.uc_link);
+		put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+		put_user_ex(sas_ss_flags(regs->sp),
+			    &frame->uc.uc_stack.ss_flags);
+		put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+		err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
+					     regs, set->sig[0]);
+		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+		if (ka->sa.sa_flags & SA_RESTORER)
+			restorer = ka->sa.sa_restorer;
+		else
+			restorer = VDSO32_SYMBOL(current->mm->context.vdso,
+						 rt_sigreturn);
+		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
+
+		/*
+		 * Not actually used anymore, but left because some gdb
+		 * versions need it.
+		 */
+		put_user_ex(*((u64 *)&code), (u64 *)frame->retcode);
+	} put_user_catch(err);
 
-	if (ka->sa.sa_flags & SA_RESTORER)
-		restorer = ka->sa.sa_restorer;
-	else
-		restorer = VDSO32_SYMBOL(current->mm->context.vdso,
-					 rt_sigreturn);
-	err |= __put_user(ptr_to_compat(restorer), &frame->pretcode);
-
-	/*
-	 * Not actually used anymore, but left because some gdb
-	 * versions need it.
-	 */
-	err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode);
 	if (err)
 		return -EFAULT;
 
-- 
cgit v1.2.3


From b1882e68d17a93b523dce09c3a181319aace2f0e Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Fri, 23 Jan 2009 17:18:52 -0800
Subject: x86: clean up stray space in <asm/processor.h>

Impact: Whitespace cleanup only

Clean up a stray space character in arch/x86/include/asm/processor.h.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 091cd8855f2..ac8fab3b868 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -73,7 +73,7 @@ struct cpuinfo_x86 {
 	char			pad0;
 #else
 	/* Number of 4K pages in DTLB/ITLB combined(in pages): */
-	int			 x86_tlbsize;
+	int			x86_tlbsize;
 	__u8			x86_virt_bits;
 	__u8			x86_phys_bits;
 #endif
-- 
cgit v1.2.3


From 75a048119e76540d73132cfc8e0fa0c0a8bb6c83 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Thu, 22 Jan 2009 16:17:05 -0800
Subject: x86: handle PAT more like other CPU features

Impact: Cleanup

When PAT was originally introduced, it was handled specially for a few
reasons:

- PAT bugs are hard to track down, so we wanted to maintain a
  whitelist of CPUs.
- The i386 and x86-64 CPUID code was not yet unified.

Both of these are now obsolete, so handle PAT like any other features,
including ordinary feature blacklisting due to known bugs.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/pat.h                 |  4 ----
 arch/x86/kernel/cpu/addon_cpuid_features.c | 34 ------------------------------
 arch/x86/kernel/cpu/common.c               |  2 --
 arch/x86/kernel/cpu/intel.c                | 12 +++++++++++
 arch/x86/mm/pat.c                          | 31 +++++++++++++++++----------
 5 files changed, 32 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index b8493b3b989..9709fdff661 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -5,10 +5,8 @@
 
 #ifdef CONFIG_X86_PAT
 extern int pat_enabled;
-extern void validate_pat_support(struct cpuinfo_x86 *c);
 #else
 static const int pat_enabled;
-static inline void validate_pat_support(struct cpuinfo_x86 *c) { }
 #endif
 
 extern void pat_init(void);
@@ -17,6 +15,4 @@ extern int reserve_memtype(u64 start, u64 end,
 		unsigned long req_type, unsigned long *ret_type);
 extern int free_memtype(u64 start, u64 end);
 
-extern void pat_disable(char *reason);
-
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 2cf23634b6d..4e581fdc0a5 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -143,37 +143,3 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 	return;
 #endif
 }
-
-#ifdef CONFIG_X86_PAT
-void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
-{
-	if (!cpu_has_pat)
-		pat_disable("PAT not supported by CPU.");
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_INTEL:
-		/*
-		 * There is a known erratum on Pentium III and Core Solo
-		 * and Core Duo CPUs.
-		 * " Page with PAT set to WC while associated MTRR is UC
-		 *   may consolidate to UC "
-		 * Because of this erratum, it is better to stick with
-		 * setting WC in MTRR rather than using PAT on these CPUs.
-		 *
-		 * Enable PAT WC only on P4, Core 2 or later CPUs.
-		 */
-		if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
-			return;
-
-		pat_disable("PAT WC disabled due to known CPU erratum.");
-		return;
-
-	case X86_VENDOR_AMD:
-	case X86_VENDOR_CENTAUR:
-	case X86_VENDOR_TRANSMETA:
-		return;
-	}
-
-	pat_disable("PAT disabled. Not yet verified on this CPU type.");
-}
-#endif
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 83492b1f93b..0f8656361e0 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -570,8 +570,6 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	if (this_cpu->c_early_init)
 		this_cpu->c_early_init(c);
 
-	validate_pat_support(c);
-
 #ifdef CONFIG_SMP
 	c->cpu_index = boot_cpu_id;
 #endif
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 8ea6929e974..20ce03acf04 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -50,6 +50,18 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
 	}
 
+	/*
+	 * There is a known erratum on Pentium III and Core Solo
+	 * and Core Duo CPUs.
+	 * " Page with PAT set to WC while associated MTRR is UC
+	 *   may consolidate to UC "
+	 * Because of this erratum, it is better to stick with
+	 * setting WC in MTRR rather than using PAT on these CPUs.
+	 *
+	 * Enable PAT WC only on P4, Core 2 or later CPUs.
+	 */
+	if (c->x86 == 6 && c->x86_model < 15)
+		clear_cpu_cap(c, X86_FEATURE_PAT);
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 8b08fb95527..430cb44dd3f 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -30,7 +30,7 @@
 #ifdef CONFIG_X86_PAT
 int __read_mostly pat_enabled = 1;
 
-void __cpuinit pat_disable(char *reason)
+void __cpuinit pat_disable(const char *reason)
 {
 	pat_enabled = 0;
 	printk(KERN_INFO "%s\n", reason);
@@ -42,6 +42,11 @@ static int __init nopat(char *str)
 	return 0;
 }
 early_param("nopat", nopat);
+#else
+static inline void pat_disable(const char *reason)
+{
+	(void)reason;
+}
 #endif
 
 
@@ -78,16 +83,20 @@ void pat_init(void)
 	if (!pat_enabled)
 		return;
 
-	/* Paranoia check. */
-	if (!cpu_has_pat && boot_pat_state) {
-		/*
-		 * If this happens we are on a secondary CPU, but
-		 * switched to PAT on the boot CPU. We have no way to
-		 * undo PAT.
-		 */
-		printk(KERN_ERR "PAT enabled, "
-		       "but not supported by secondary CPU\n");
-		BUG();
+	if (!cpu_has_pat) {
+		if (!boot_pat_state) {
+			pat_disable("PAT not supported by CPU.");
+			return;
+		} else {
+			/*
+			 * If this happens we are on a secondary CPU, but
+			 * switched to PAT on the boot CPU. We have no way to
+			 * undo PAT.
+			 */
+			printk(KERN_ERR "PAT enabled, "
+			       "but not supported by secondary CPU\n");
+			BUG();
+		}
 	}
 
 	/* Set PWT to Write-Combining. All other bits stay the same */
-- 
cgit v1.2.3


From b38b0665905538e76e26f2a4c686179abb1f69f6 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Fri, 23 Jan 2009 17:20:50 -0800
Subject: x86: filter CPU features dependent on unavailable CPUID levels

Impact: Fixes potential crashes on misconfigured systems.

Some CPU features require specific CPUID levels to be available in
order to function, as they contain information about the operation of
a specific feature.  However, some BIOSes and virtualization software
provide the ability to mask CPUID levels in order to support legacy
operating systems.  We try to enable such CPUID levels when we know
how to do it, but for the remaining cases, filter out such CPU
features when there is no way for us to support them.

Do this in one place, in the CPUID code, with a table-driven approach.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/common.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 0f8656361e0..21f086b4c1a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -212,6 +212,49 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 }
 #endif
 
+/*
+ * Some CPU features depend on higher CPUID levels, which may not always
+ * be available due to CPUID level capping or broken virtualization
+ * software.  Add those features to this table to auto-disable them.
+ */
+struct cpuid_dependent_feature {
+	u32 feature;
+	u32 level;
+};
+static const struct cpuid_dependent_feature __cpuinitconst
+cpuid_dependent_features[] = {
+	{ X86_FEATURE_MWAIT,		0x00000005 },
+	{ X86_FEATURE_DCA,		0x00000009 },
+	{ X86_FEATURE_XSAVE,		0x0000000d },
+	{ 0, 0 }
+};
+
+static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
+{
+	const struct cpuid_dependent_feature *df;
+	for (df = cpuid_dependent_features; df->feature; df++) {
+		/*
+		 * Note: cpuid_level is set to -1 if unavailable, but
+		 * extended_extended_level is set to 0 if unavailable
+		 * and the legitimate extended levels are all negative
+		 * when signed; hence the weird messing around with
+		 * signs here...
+		 */
+		if (cpu_has(c, df->feature) &&
+		    ((s32)df->feature < 0 ?
+		     (u32)df->feature > (u32)c->extended_cpuid_level :
+		     (s32)df->feature > (s32)c->cpuid_level)) {
+			clear_cpu_cap(c, df->feature);
+			if (warn)
+				printk(KERN_WARNING
+				       "CPU: CPU feature %s disabled "
+				       "due to lack of CPUID level 0x%x\n",
+				       x86_cap_flags[df->feature],
+				       df->level);
+		}
+	}
+}	
+
 /*
  * Naming convention should be: <Name> [(<Codename>)]
  * This table only is used unless init_<vendor>() below doesn't set it;
@@ -573,6 +616,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 #ifdef CONFIG_SMP
 	c->cpu_index = boot_cpu_id;
 #endif
+	filter_cpuid_features(c, false);
 }
 
 void __init early_cpu_init(void)
@@ -706,6 +750,9 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	 * we do "generic changes."
 	 */
 
+	/* Filter out anything that depends on CPUID levels we don't have */
+	filter_cpuid_features(c, true);
+
 	/* If the model name is still unset, do table lookup. */
 	if (!c->x86_model_id[0]) {
 		char *p;
-- 
cgit v1.2.3


From 2d4d57db692ea790e185656516e6ebe8791f1788 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Sun, 25 Jan 2009 12:50:13 -0800
Subject: x86: micro-optimize __raw_read_trylock()

The current version of __raw_read_trylock starts with decrementing the lock
and read its new value as a separate operation after that.

That makes 3 dereferences (read, write (after sub), read) whereas
a single atomic_dec_return does only two pointers dereferences (read, write).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/spinlock.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index d17c91981da..4d3dcc51cac 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -329,8 +329,7 @@ static inline int __raw_read_trylock(raw_rwlock_t *lock)
 {
 	atomic_t *count = (atomic_t *)lock;
 
-	atomic_dec(count);
-	if (atomic_read(count) >= 0)
+	if (atomic_dec_return(count) >= 0)
 		return 1;
 	atomic_inc(count);
 	return 0;
-- 
cgit v1.2.3


From 34707bcd0452aba644396767bc9fb61585bdab4f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 26 Jan 2009 14:18:05 +0100
Subject: x86, debug: remove early_printk() #ifdefs from head_32.S

Impact: cleanup

Remove such constructs:

 #ifdef CONFIG_EARLY_PRINTK
        call early_printk
 #else
        call printk
 #endif

Not only are they ugly, they are also pointless: a call to printk()
maps to early_printk during early bootup anyway, if CONFIG_EARLY_PRINTK
is enabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/head_32.S | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index e835b4eea70..9f141071160 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -548,11 +548,7 @@ early_fault:
 	pushl %eax
 	pushl %edx		/* trapno */
 	pushl $fault_msg
-#ifdef CONFIG_EARLY_PRINTK
-	call early_printk
-#else
 	call printk
-#endif
 #endif
 	call dump_stack
 hlt_loop:
@@ -580,11 +576,7 @@ ignore_int:
 	pushl 32(%esp)
 	pushl 40(%esp)
 	pushl $int_msg
-#ifdef CONFIG_EARLY_PRINTK
-	call early_printk
-#else
 	call printk
-#endif
 	addl $(5*4),%esp
 	popl %ds
 	popl %es
-- 
cgit v1.2.3


From d5e397cb49b53381e4c99a064ca733c665646de8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 26 Jan 2009 06:09:00 +0100
Subject: x86: improve early fault/irq printout

Impact: add a stack dump to early IRQs/faults

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/head_32.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 9f141071160..84d05a4d7fc 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -577,6 +577,9 @@ ignore_int:
 	pushl 40(%esp)
 	pushl $int_msg
 	call printk
+
+	call dump_stack
+
 	addl $(5*4),%esp
 	popl %ds
 	popl %es
@@ -652,7 +655,7 @@ early_recursion_flag:
 	.long 0
 
 int_msg:
-	.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
+	.asciz "Unknown interrupt or fault at: %p %p %p\n"
 
 fault_msg:
 /* fault info: */
-- 
cgit v1.2.3


From 0d77e7f04d5da160307f4f5c030a171e004f602b Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:47 +0900
Subject: x86: merge setup_per_cpu_maps() into setup_per_cpu_areas()

Impact: minor optimization

Eliminates the need for two loops over possible cpus.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 48 +++++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 90b8e154bb5..d0b1476490a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -97,33 +97,6 @@ static inline void setup_cpu_local_masks(void)
 #endif /* CONFIG_X86_32 */
 
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
-/*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas.  These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
- */
-static void __init setup_per_cpu_maps(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		per_cpu(x86_cpu_to_apicid, cpu) =
-				early_per_cpu_map(x86_cpu_to_apicid, cpu);
-		per_cpu(x86_bios_cpu_apicid, cpu) =
-				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
-#ifdef X86_64_NUMA
-		per_cpu(x86_cpu_to_node_map, cpu) =
-				early_per_cpu_map(x86_cpu_to_node_map, cpu);
-#endif
-	}
-
-	/* indicate the early static arrays will soon be gone */
-	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
-	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
-#ifdef X86_64_NUMA
-	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
-#endif
-}
 
 #ifdef CONFIG_X86_64
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
@@ -181,6 +154,19 @@ void __init setup_per_cpu_areas(void)
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
+		/*
+		 * Copy data used in early init routines from the initial arrays to the
+		 * per cpu data areas.  These arrays then become expendable and the
+		 * *_early_ptr's are zeroed indicating that the static arrays are gone.
+		 */
+		per_cpu(x86_cpu_to_apicid, cpu) =
+				early_per_cpu_map(x86_cpu_to_apicid, cpu);
+		per_cpu(x86_bios_cpu_apicid, cpu) =
+				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
+#ifdef X86_64_NUMA
+		per_cpu(x86_cpu_to_node_map, cpu) =
+				early_per_cpu_map(x86_cpu_to_node_map, cpu);
+#endif
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
 			per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64;
@@ -195,8 +181,12 @@ void __init setup_per_cpu_areas(void)
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
 
-	/* Setup percpu data maps */
-	setup_per_cpu_maps();
+	/* indicate the early static arrays will soon be gone */
+	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
+	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
+#ifdef X86_64_NUMA
+	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
+#endif
 
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
-- 
cgit v1.2.3


From 6470aff619fbb9dff8dfe8afa5033084cd55ca20 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:47 +0900
Subject: x86: move 64-bit NUMA code

Impact: Code movement, no functional change.

Move the 64-bit NUMA code from setup_percpu.c to numa_64.c

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/topology.h |   6 +
 arch/x86/kernel/setup_percpu.c  | 237 +---------------------------------------
 arch/x86/mm/numa_64.c           | 217 ++++++++++++++++++++++++++++++++++++
 3 files changed, 228 insertions(+), 232 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 10022ed3a4b..77cfb2cfb38 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -74,6 +74,8 @@ static inline const struct cpumask *cpumask_of_node(int node)
 	return &node_to_cpumask_map[node];
 }
 
+static inline void setup_node_to_cpumask_map(void) { }
+
 #else /* CONFIG_X86_64 */
 
 /* Mappings between node number and cpus on that node. */
@@ -120,6 +122,8 @@ static inline cpumask_t node_to_cpumask(int node)
 
 #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
 
+extern void setup_node_to_cpumask_map(void);
+
 /*
  * Replace default node_to_cpumask_ptr with optimized version
  * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
@@ -218,6 +222,8 @@ static inline int node_to_first_cpu(int node)
 	return first_cpu(cpu_online_map);
 }
 
+static inline void setup_node_to_cpumask_map(void) { }
+
 /*
  * Replace default node_to_cpumask_ptr with optimized version
  * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index d0b1476490a..cb6d622520b 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -51,32 +51,6 @@ DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
 
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-#define	X86_64_NUMA	1	/* (used later) */
-DEFINE_PER_CPU(int, node_number) = 0;
-EXPORT_PER_CPU_SYMBOL(node_number);
-
-/*
- * Map cpu index to node index
- */
-DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
-
-/*
- * Which logical CPUs are on which nodes
- */
-cpumask_t *node_to_cpumask_map;
-EXPORT_SYMBOL(node_to_cpumask_map);
-
-/*
- * Setup node_to_cpumask_map
- */
-static void __init setup_node_to_cpumask_map(void);
-
-#else
-static inline void setup_node_to_cpumask_map(void) { }
-#endif
-
 #ifdef CONFIG_X86_64
 
 /* correctly size the local cpu masks */
@@ -163,13 +137,13 @@ void __init setup_per_cpu_areas(void)
 				early_per_cpu_map(x86_cpu_to_apicid, cpu);
 		per_cpu(x86_bios_cpu_apicid, cpu) =
 				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
-#ifdef X86_64_NUMA
-		per_cpu(x86_cpu_to_node_map, cpu) =
-				early_per_cpu_map(x86_cpu_to_node_map, cpu);
-#endif
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
 			per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64;
+#ifdef CONFIG_NUMA
+		per_cpu(x86_cpu_to_node_map, cpu) =
+				early_per_cpu_map(x86_cpu_to_node_map, cpu);
+#endif
 		/*
 		 * Up to this point, CPU0 has been using .data.init
 		 * area.  Reload %gs offset for CPU0.
@@ -184,7 +158,7 @@ void __init setup_per_cpu_areas(void)
 	/* indicate the early static arrays will soon be gone */
 	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
 	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
-#ifdef X86_64_NUMA
+#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
 	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
 #endif
 
@@ -197,204 +171,3 @@ void __init setup_per_cpu_areas(void)
 
 #endif
 
-#ifdef X86_64_NUMA
-
-/*
- * Allocate node_to_cpumask_map based on number of available nodes
- * Requires node_possible_map to be valid.
- *
- * Note: node_to_cpumask() is not valid until after this is done.
- * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.)
- */
-static void __init setup_node_to_cpumask_map(void)
-{
-	unsigned int node, num = 0;
-	cpumask_t *map;
-
-	/* setup nr_node_ids if not done yet */
-	if (nr_node_ids == MAX_NUMNODES) {
-		for_each_node_mask(node, node_possible_map)
-			num = node;
-		nr_node_ids = num + 1;
-	}
-
-	/* allocate the map */
-	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
-	DBG("node_to_cpumask_map at %p for %d nodes\n", map, nr_node_ids);
-
-	pr_debug("Node to cpumask map at %p for %d nodes\n",
-		 map, nr_node_ids);
-
-	/* node_to_cpumask() will now work */
-	node_to_cpumask_map = map;
-}
-
-void __cpuinit numa_set_node(int cpu, int node)
-{
-	int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
-
-	/* early setting, no percpu area yet */
-	if (cpu_to_node_map) {
-		cpu_to_node_map[cpu] = node;
-		return;
-	}
-
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-	if (cpu >= nr_cpu_ids || !per_cpu_offset(cpu)) {
-		printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
-		dump_stack();
-		return;
-	}
-#endif
-	per_cpu(x86_cpu_to_node_map, cpu) = node;
-
-	if (node != NUMA_NO_NODE)
-		per_cpu(node_number, cpu) = node;
-}
-
-void __cpuinit numa_clear_node(int cpu)
-{
-	numa_set_node(cpu, NUMA_NO_NODE);
-}
-
-#ifndef CONFIG_DEBUG_PER_CPU_MAPS
-
-void __cpuinit numa_add_cpu(int cpu)
-{
-	cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
-}
-
-void __cpuinit numa_remove_cpu(int cpu)
-{
-	cpu_clear(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
-}
-
-#else /* CONFIG_DEBUG_PER_CPU_MAPS */
-
-/*
- * --------- debug versions of the numa functions ---------
- */
-static void __cpuinit numa_set_cpumask(int cpu, int enable)
-{
-	int node = early_cpu_to_node(cpu);
-	cpumask_t *mask;
-	char buf[64];
-
-	if (node_to_cpumask_map == NULL) {
-		printk(KERN_ERR "node_to_cpumask_map NULL\n");
-		dump_stack();
-		return;
-	}
-
-	mask = &node_to_cpumask_map[node];
-	if (enable)
-		cpu_set(cpu, *mask);
-	else
-		cpu_clear(cpu, *mask);
-
-	cpulist_scnprintf(buf, sizeof(buf), mask);
-	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
-		enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf);
-}
-
-void __cpuinit numa_add_cpu(int cpu)
-{
-	numa_set_cpumask(cpu, 1);
-}
-
-void __cpuinit numa_remove_cpu(int cpu)
-{
-	numa_set_cpumask(cpu, 0);
-}
-
-int cpu_to_node(int cpu)
-{
-	if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
-		printk(KERN_WARNING
-			"cpu_to_node(%d): usage too early!\n", cpu);
-		dump_stack();
-		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
-	}
-	return per_cpu(x86_cpu_to_node_map, cpu);
-}
-EXPORT_SYMBOL(cpu_to_node);
-
-/*
- * Same function as cpu_to_node() but used if called before the
- * per_cpu areas are setup.
- */
-int early_cpu_to_node(int cpu)
-{
-	if (early_per_cpu_ptr(x86_cpu_to_node_map))
-		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
-
-	if (!per_cpu_offset(cpu)) {
-		printk(KERN_WARNING
-			"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
-		dump_stack();
-		return NUMA_NO_NODE;
-	}
-	return per_cpu(x86_cpu_to_node_map, cpu);
-}
-
-
-/* empty cpumask */
-static const cpumask_t cpu_mask_none;
-
-/*
- * Returns a pointer to the bitmask of CPUs on Node 'node'.
- */
-const cpumask_t *cpumask_of_node(int node)
-{
-	if (node_to_cpumask_map == NULL) {
-		printk(KERN_WARNING
-			"cpumask_of_node(%d): no node_to_cpumask_map!\n",
-			node);
-		dump_stack();
-		return (const cpumask_t *)&cpu_online_map;
-	}
-	if (node >= nr_node_ids) {
-		printk(KERN_WARNING
-			"cpumask_of_node(%d): node > nr_node_ids(%d)\n",
-			node, nr_node_ids);
-		dump_stack();
-		return &cpu_mask_none;
-	}
-	return &node_to_cpumask_map[node];
-}
-EXPORT_SYMBOL(cpumask_of_node);
-
-/*
- * Returns a bitmask of CPUs on Node 'node'.
- *
- * Side note: this function creates the returned cpumask on the stack
- * so with a high NR_CPUS count, excessive stack space is used.  The
- * node_to_cpumask_ptr function should be used whenever possible.
- */
-cpumask_t node_to_cpumask(int node)
-{
-	if (node_to_cpumask_map == NULL) {
-		printk(KERN_WARNING
-			"node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
-		dump_stack();
-		return cpu_online_map;
-	}
-	if (node >= nr_node_ids) {
-		printk(KERN_WARNING
-			"node_to_cpumask(%d): node > nr_node_ids(%d)\n",
-			node, nr_node_ids);
-		dump_stack();
-		return cpu_mask_none;
-	}
-	return node_to_cpumask_map[node];
-}
-EXPORT_SYMBOL(node_to_cpumask);
-
-/*
- * --------- end of debug versions of the numa functions ---------
- */
-
-#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
-
-#endif /* X86_64_NUMA */
-
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 71a14f89f89..08d140fbc31 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -20,6 +20,12 @@
 #include <asm/acpi.h>
 #include <asm/k8.h>
 
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+# define DBG(x...) printk(KERN_DEBUG x)
+#else
+# define DBG(x...)
+#endif
+
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
@@ -33,6 +39,21 @@ int numa_off __initdata;
 static unsigned long __initdata nodemap_addr;
 static unsigned long __initdata nodemap_size;
 
+DEFINE_PER_CPU(int, node_number) = 0;
+EXPORT_PER_CPU_SYMBOL(node_number);
+
+/*
+ * Map cpu index to node index
+ */
+DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
+
+/*
+ * Which logical CPUs are on which nodes
+ */
+cpumask_t *node_to_cpumask_map;
+EXPORT_SYMBOL(node_to_cpumask_map);
+
 /*
  * Given a shift value, try to populate memnodemap[]
  * Returns :
@@ -640,3 +661,199 @@ void __init init_cpu_to_node(void)
 #endif
 
 
+/*
+ * Allocate node_to_cpumask_map based on number of available nodes
+ * Requires node_possible_map to be valid.
+ *
+ * Note: node_to_cpumask() is not valid until after this is done.
+ * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.)
+ */
+void __init setup_node_to_cpumask_map(void)
+{
+	unsigned int node, num = 0;
+	cpumask_t *map;
+
+	/* setup nr_node_ids if not done yet */
+	if (nr_node_ids == MAX_NUMNODES) {
+		for_each_node_mask(node, node_possible_map)
+			num = node;
+		nr_node_ids = num + 1;
+	}
+
+	/* allocate the map */
+	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
+	DBG("node_to_cpumask_map at %p for %d nodes\n", map, nr_node_ids);
+
+	pr_debug("Node to cpumask map at %p for %d nodes\n",
+		 map, nr_node_ids);
+
+	/* node_to_cpumask() will now work */
+	node_to_cpumask_map = map;
+}
+
+void __cpuinit numa_set_node(int cpu, int node)
+{
+	int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
+
+	/* early setting, no percpu area yet */
+	if (cpu_to_node_map) {
+		cpu_to_node_map[cpu] = node;
+		return;
+	}
+
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+	if (cpu >= nr_cpu_ids || !per_cpu_offset(cpu)) {
+		printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
+		dump_stack();
+		return;
+	}
+#endif
+	per_cpu(x86_cpu_to_node_map, cpu) = node;
+
+	if (node != NUMA_NO_NODE)
+		per_cpu(node_number, cpu) = node;
+}
+
+void __cpuinit numa_clear_node(int cpu)
+{
+	numa_set_node(cpu, NUMA_NO_NODE);
+}
+
+#ifndef CONFIG_DEBUG_PER_CPU_MAPS
+
+void __cpuinit numa_add_cpu(int cpu)
+{
+	cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
+}
+
+void __cpuinit numa_remove_cpu(int cpu)
+{
+	cpu_clear(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
+}
+
+#else /* CONFIG_DEBUG_PER_CPU_MAPS */
+
+/*
+ * --------- debug versions of the numa functions ---------
+ */
+static void __cpuinit numa_set_cpumask(int cpu, int enable)
+{
+	int node = early_cpu_to_node(cpu);
+	cpumask_t *mask;
+	char buf[64];
+
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_ERR "node_to_cpumask_map NULL\n");
+		dump_stack();
+		return;
+	}
+
+	mask = &node_to_cpumask_map[node];
+	if (enable)
+		cpu_set(cpu, *mask);
+	else
+		cpu_clear(cpu, *mask);
+
+	cpulist_scnprintf(buf, sizeof(buf), mask);
+	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
+		enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf);
+}
+
+void __cpuinit numa_add_cpu(int cpu)
+{
+	numa_set_cpumask(cpu, 1);
+}
+
+void __cpuinit numa_remove_cpu(int cpu)
+{
+	numa_set_cpumask(cpu, 0);
+}
+
+int cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
+		printk(KERN_WARNING
+			"cpu_to_node(%d): usage too early!\n", cpu);
+		dump_stack();
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+	}
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+EXPORT_SYMBOL(cpu_to_node);
+
+/*
+ * Same function as cpu_to_node() but used if called before the
+ * per_cpu areas are setup.
+ */
+int early_cpu_to_node(int cpu)
+{
+	if (early_per_cpu_ptr(x86_cpu_to_node_map))
+		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
+
+	if (!per_cpu_offset(cpu)) {
+		printk(KERN_WARNING
+			"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
+		dump_stack();
+		return NUMA_NO_NODE;
+	}
+	return per_cpu(x86_cpu_to_node_map, cpu);
+}
+
+
+/* empty cpumask */
+static const cpumask_t cpu_mask_none;
+
+/*
+ * Returns a pointer to the bitmask of CPUs on Node 'node'.
+ */
+const cpumask_t *cpumask_of_node(int node)
+{
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_WARNING
+			"cpumask_of_node(%d): no node_to_cpumask_map!\n",
+			node);
+		dump_stack();
+		return (const cpumask_t *)&cpu_online_map;
+	}
+	if (node >= nr_node_ids) {
+		printk(KERN_WARNING
+			"cpumask_of_node(%d): node > nr_node_ids(%d)\n",
+			node, nr_node_ids);
+		dump_stack();
+		return &cpu_mask_none;
+	}
+	return &node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(cpumask_of_node);
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ *
+ * Side note: this function creates the returned cpumask on the stack
+ * so with a high NR_CPUS count, excessive stack space is used.  The
+ * node_to_cpumask_ptr function should be used whenever possible.
+ */
+cpumask_t node_to_cpumask(int node)
+{
+	if (node_to_cpumask_map == NULL) {
+		printk(KERN_WARNING
+			"node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
+		dump_stack();
+		return cpu_online_map;
+	}
+	if (node >= nr_node_ids) {
+		printk(KERN_WARNING
+			"node_to_cpumask(%d): node > nr_node_ids(%d)\n",
+			node, nr_node_ids);
+		dump_stack();
+		return cpu_mask_none;
+	}
+	return node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(node_to_cpumask);
+
+/*
+ * --------- end of debug versions of the numa functions ---------
+ */
+
+#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
-- 
cgit v1.2.3


From 2f2f52bad72f5e1ca5d1b9ad00a7b57a8cbd9159 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:47 +0900
Subject: x86: move setup_cpu_local_masks()

Impact: Code movement, no functional change.

Move setup_cpu_local_masks() to kernel/cpu/common.c, where the
masks are defined.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/cpumask.h |  4 ++++
 arch/x86/kernel/cpu/common.c   |  9 +++++++++
 arch/x86/kernel/setup_percpu.c | 19 -------------------
 3 files changed, 13 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
index 26c6dad9047..a7f3c75f8ad 100644
--- a/arch/x86/include/asm/cpumask.h
+++ b/arch/x86/include/asm/cpumask.h
@@ -10,6 +10,8 @@ extern cpumask_var_t cpu_callout_mask;
 extern cpumask_var_t cpu_initialized_mask;
 extern cpumask_var_t cpu_sibling_setup_mask;
 
+extern void setup_cpu_local_masks(void);
+
 #else /* CONFIG_X86_32 */
 
 extern cpumask_t cpu_callin_map;
@@ -22,6 +24,8 @@ extern cpumask_t cpu_sibling_setup_map;
 #define cpu_initialized_mask	((struct cpumask *)&cpu_initialized)
 #define cpu_sibling_setup_mask	((struct cpumask *)&cpu_sibling_setup_map)
 
+static inline void setup_cpu_local_masks(void) { }
+
 #endif /* CONFIG_X86_32 */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 99904f288d6..67e30c8a282 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -52,6 +52,15 @@ cpumask_var_t cpu_initialized_mask;
 /* representing cpus for which sibling maps can be computed */
 cpumask_var_t cpu_sibling_setup_mask;
 
+/* correctly size the local cpu masks */
+void setup_cpu_local_masks(void)
+{
+	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
+	alloc_bootmem_cpumask_var(&cpu_callin_mask);
+	alloc_bootmem_cpumask_var(&cpu_callout_mask);
+	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
+}
+
 #else /* CONFIG_X86_32 */
 
 cpumask_t cpu_callin_map;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index cb6d622520b..7bebdba8eb8 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -51,25 +51,6 @@ DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
 
-#ifdef CONFIG_X86_64
-
-/* correctly size the local cpu masks */
-static void setup_cpu_local_masks(void)
-{
-	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
-	alloc_bootmem_cpumask_var(&cpu_callin_mask);
-	alloc_bootmem_cpumask_var(&cpu_callout_mask);
-	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
-}
-
-#else /* CONFIG_X86_32 */
-
-static inline void setup_cpu_local_masks(void)
-{
-}
-
-#endif /* CONFIG_X86_32 */
-
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 
 #ifdef CONFIG_X86_64
-- 
cgit v1.2.3


From 74631a248dc2c2129a96f6b8b706ed54bb5c3d3c Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:47 +0900
Subject: x86: always page-align per-cpu area start and size

Impact: cleanup

The way the code is written, align is always PAGE_SIZE.  Simplify
the code by removing the align variable.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 7bebdba8eb8..5d4a4964a8b 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -69,15 +69,12 @@ EXPORT_SYMBOL(__per_cpu_offset);
  */
 void __init setup_per_cpu_areas(void)
 {
-	ssize_t size, old_size;
+	ssize_t size;
 	char *ptr;
 	int cpu;
-	unsigned long align = 1;
 
 	/* Copy section for each CPU (we discard the original) */
-	old_size = PERCPU_ENOUGH_ROOM;
-	align = max_t(unsigned long, PAGE_SIZE, align);
-	size = roundup(old_size, align);
+	size = roundup(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
 
 	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
@@ -86,20 +83,17 @@ void __init setup_per_cpu_areas(void)
 
 	for_each_possible_cpu(cpu) {
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-		ptr = __alloc_bootmem(size, align,
-				 __pa(MAX_DMA_ADDRESS));
+		ptr = alloc_bootmem_pages(size);
 #else
 		int node = early_cpu_to_node(cpu);
 		if (!node_online(node) || !NODE_DATA(node)) {
-			ptr = __alloc_bootmem(size, align,
-					 __pa(MAX_DMA_ADDRESS));
+			ptr = alloc_bootmem_pages(size);
 			pr_info("cpu %d has no node %d or node-local memory\n",
 				cpu, node);
 			pr_debug("per cpu data for cpu%d at %016lx\n",
 				 cpu, __pa(ptr));
 		} else {
-			ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
-							__pa(MAX_DMA_ADDRESS));
+			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
 			pr_debug("per cpu data for cpu%d on node%d at %016lx\n",
 				cpu, node, __pa(ptr));
 		}
-- 
cgit v1.2.3


From ec70de8b04bf37213982a5e8f303bc38679f3f8e Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:47 +0900
Subject: x86: move apic variables to apic.c

Impact: Code movement

Move the variable definitions to apic.c.  Ifdef the copying of
the two early per-cpu variables, since Voyager doesn't use them.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/apic.c         | 18 ++++++++++++++++++
 arch/x86/kernel/setup_percpu.c | 22 ++--------------------
 2 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 1df341a528a..c6f15647eba 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -60,6 +60,24 @@
 # error SPURIOUS_APIC_VECTOR definition error
 #endif
 
+unsigned int num_processors;
+unsigned disabled_cpus __cpuinitdata;
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+EXPORT_SYMBOL(boot_cpu_physical_apicid);
+unsigned int max_physical_apicid;
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+/*
+ * Map cpu index to physical APIC ID
+ */
+DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
+DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
 #ifdef CONFIG_X86_32
 /*
  * Knob to control our willingness to enable the local APIC.
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 5d4a4964a8b..d367996693e 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -31,26 +31,6 @@ DEFINE_PER_CPU(int, cpu_number);
 EXPORT_PER_CPU_SYMBOL(cpu_number);
 #endif
 
-#ifdef CONFIG_X86_LOCAL_APIC
-unsigned int num_processors;
-unsigned disabled_cpus __cpuinitdata;
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-EXPORT_SYMBOL(boot_cpu_physical_apicid);
-unsigned int max_physical_apicid;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
-#endif
-
-/*
- * Map cpu index to physical APIC ID
- */
-DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
-DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 
 #ifdef CONFIG_X86_64
@@ -108,10 +88,12 @@ void __init setup_per_cpu_areas(void)
 		 * per cpu data areas.  These arrays then become expendable and the
 		 * *_early_ptr's are zeroed indicating that the static arrays are gone.
 		 */
+#ifdef CONFIG_X86_LOCAL_APIC
 		per_cpu(x86_cpu_to_apicid, cpu) =
 				early_per_cpu_map(x86_cpu_to_apicid, cpu);
 		per_cpu(x86_bios_cpu_apicid, cpu) =
 				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
+#endif
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
 			per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64;
-- 
cgit v1.2.3


From 996db817e3d1529d711e55b938d72ae4060b39fd Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:47 +0900
Subject: x86: only compile setup_percpu.o on SMP

Impact: Minor build optimization

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/Makefile       | 3 ++-
 arch/x86/kernel/setup_percpu.c | 6 ------
 2 files changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index a99437c965c..73de055c29c 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -28,7 +28,7 @@ CFLAGS_paravirt.o	:= $(nostackp)
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y			+= setup.o i8259.o irqinit_$(BITS).o setup_percpu.o
+obj-y			+= setup.o i8259.o irqinit_$(BITS).o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
 obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
@@ -59,6 +59,7 @@ apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_X86_SMP)		+= smp.o
 obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o
+obj-$(CONFIG_SMP)		+= setup_percpu.o
 obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index d367996693e..f30ff691c34 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -22,14 +22,8 @@
 # define DBG(x...)
 #endif
 
-/*
- * Could be inside CONFIG_HAVE_SETUP_PER_CPU_AREA with other stuff but
- * voyager wants cpu_number too.
- */
-#ifdef CONFIG_SMP
 DEFINE_PER_CPU(int, cpu_number);
 EXPORT_PER_CPU_SYMBOL(cpu_number);
-#endif
 
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 
-- 
cgit v1.2.3


From 1688401a0fddba8991aa5c0943b8ae9583998d60 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:48 +0900
Subject: x86: move this_cpu_offset

Impact: Small cleanup

Define BOOT_PERCPU_OFFSET and use it for this_cpu_offset and
__per_cpu_offset initializers.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 15 ++++++++++-----
 arch/x86/kernel/smpcommon.c    |  7 -------
 2 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index f30ff691c34..36c2e81dfc3 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -25,15 +25,20 @@
 DEFINE_PER_CPU(int, cpu_number);
 EXPORT_PER_CPU_SYMBOL(cpu_number);
 
+#ifdef CONFIG_X86_64
+#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
+#else
+#define BOOT_PERCPU_OFFSET 0
+#endif
+
+DEFINE_PER_CPU(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
+
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 
-#ifdef CONFIG_X86_64
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
-	[0] = (unsigned long)__per_cpu_load,
+	[0] = BOOT_PERCPU_OFFSET,
 };
-#else
-unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
-#endif
 EXPORT_SYMBOL(__per_cpu_offset);
 
 /*
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index add36b4e37c..5ec29a1a846 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -5,13 +5,6 @@
 #include <asm/smp.h>
 #include <asm/sections.h>
 
-#ifdef CONFIG_X86_64
-DEFINE_PER_CPU(unsigned long, this_cpu_off) = (unsigned long)__per_cpu_load;
-#else
-DEFINE_PER_CPU(unsigned long, this_cpu_off);
-#endif
-EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-
 #ifdef CONFIG_X86_32
 /*
  * Initialize the CPU's GDT.  This is either the boot CPU doing itself
-- 
cgit v1.2.3


From 34019be1cd2941128b5de6d7c0fbdb51f967d268 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:48 +0900
Subject: x86: don't assume boot cpu is #0

Impact: minor cleanup

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 36c2e81dfc3..be77f1a1231 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -15,6 +15,7 @@
 #include <asm/highmem.h>
 #include <asm/proto.h>
 #include <asm/cpumask.h>
+#include <asm/cpu.h>
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
 # define DBG(x...) printk(KERN_DEBUG x)
@@ -37,7 +38,7 @@ EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
-	[0] = BOOT_PERCPU_OFFSET,
+	[0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
@@ -101,10 +102,10 @@ void __init setup_per_cpu_areas(void)
 				early_per_cpu_map(x86_cpu_to_node_map, cpu);
 #endif
 		/*
-		 * Up to this point, CPU0 has been using .data.init
-		 * area.  Reload %gs offset for CPU0.
+		 * Up to this point, the boot CPU has been using .data.init
+		 * area.  Reload %gs offset for the boot CPU.
 		 */
-		if (cpu == 0)
+		if (cpu == boot_cpu_id)
 			load_gs_base(cpu);
 #endif
 
-- 
cgit v1.2.3


From 89c9c4c58ee86e6e8802597271f23679e0c46647 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:48 +0900
Subject: x86: make Voyager use x86 per-cpu setup.

Impact: standardize all x86 platforms on same setup code

With the preceding changes, Voyager can use the same per-cpu setup
code as all the other x86 platforms.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/Kconfig                    | 2 +-
 arch/x86/kernel/setup_percpu.c      | 5 -----
 arch/x86/mach-voyager/voyager_smp.c | 3 ---
 3 files changed, 1 insertion(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5a29b792cb8..d6218e6c982 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -133,7 +133,7 @@ config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
 config HAVE_SETUP_PER_CPU_AREA
-	def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER)
+	def_bool y
 
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index be77f1a1231..599dc1cc1da 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -35,8 +35,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_number);
 DEFINE_PER_CPU(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
-#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
-
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 	[0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
 };
@@ -125,6 +123,3 @@ void __init setup_per_cpu_areas(void)
 	/* Setup cpu initialized, callin, callout masks */
 	setup_cpu_local_masks();
 }
-
-#endif
-
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 96f15b09a4c..dd82f2052f3 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -531,7 +531,6 @@ static void __init do_boot_cpu(__u8 cpu)
 	stack_start.sp = (void *)idle->thread.sp;
 
 	init_gdt(cpu);
-	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	per_cpu(current_task, cpu) = idle;
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	irq_ctx_init(cpu);
@@ -1749,7 +1748,6 @@ static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
 static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 {
 	init_gdt(smp_processor_id());
-	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	switch_to_new_gdt();
 
 	cpu_set(smp_processor_id(), cpu_online_map);
@@ -1782,7 +1780,6 @@ static void __init voyager_smp_cpus_done(unsigned int max_cpus)
 void __init smp_setup_processor_id(void)
 {
 	current_thread_info()->cpu = hard_smp_processor_id();
-	percpu_write(cpu_number, hard_smp_processor_id());
 }
 
 static void voyager_send_call_func(cpumask_t callmask)
-- 
cgit v1.2.3


From b2d2f4312b117a6cc647c8521e2643a88771f757 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:48 +0900
Subject: x86: initialize per-cpu GDT segment in per-cpu setup

Impact: cleanup

Rename init_gdt() to setup_percpu_segment(), and move it to
setup_percpu.c.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/processor.h    |  1 -
 arch/x86/kernel/Makefile            |  3 +--
 arch/x86/kernel/setup_percpu.c      | 14 ++++++++++++++
 arch/x86/kernel/smpboot.c           |  4 ----
 arch/x86/kernel/smpcommon.c         | 25 -------------------------
 arch/x86/mach-voyager/voyager_smp.c |  2 --
 arch/x86/xen/smp.c                  |  1 -
 7 files changed, 15 insertions(+), 35 deletions(-)
 delete mode 100644 arch/x86/kernel/smpcommon.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 48676b943b9..32c30b02b51 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -778,7 +778,6 @@ extern struct desc_ptr		early_gdt_descr;
 extern void cpu_set_gdt(int);
 extern void switch_to_new_gdt(void);
 extern void cpu_init(void);
-extern void init_gdt(int cpu);
 
 static inline unsigned long get_debugctlmsr(void)
 {
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 73de055c29c..37fa30bada1 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -60,8 +60,7 @@ obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_X86_SMP)		+= smp.o
 obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o
 obj-$(CONFIG_SMP)		+= setup_percpu.o
-obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
-obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
+obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 599dc1cc1da..bcca3a7b374 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -40,6 +40,19 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
+static inline void setup_percpu_segment(int cpu)
+{
+#ifdef CONFIG_X86_32
+	struct desc_struct gdt;
+
+	pack_descriptor(&gdt, per_cpu_offset(cpu), 0xFFFFF,
+			0x2 | DESCTYPE_S, 0x8);
+	gdt.s = 1;
+	write_gdt_entry(get_cpu_gdt_table(cpu),
+			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
+#endif
+}
+
 /*
  * Great future plan:
  * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
@@ -81,6 +94,7 @@ void __init setup_per_cpu_areas(void)
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
+		setup_percpu_segment(cpu);
 		/*
 		 * Copy data used in early init routines from the initial arrays to the
 		 * per cpu data areas.  These arrays then become expendable and the
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index def770b57b5..f9dbcff4354 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -793,7 +793,6 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 do_rest:
 	per_cpu(current_task, cpu) = c_idle.idle;
 #ifdef CONFIG_X86_32
-	init_gdt(cpu);
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	irq_ctx_init(cpu);
 #else
@@ -1186,9 +1185,6 @@ out:
 void __init native_smp_prepare_boot_cpu(void)
 {
 	int me = smp_processor_id();
-#ifdef CONFIG_X86_32
-	init_gdt(me);
-#endif
 	switch_to_new_gdt();
 	/* already set me in cpu_online_mask in boot_cpu_init() */
 	cpumask_set_cpu(me, cpu_callout_mask);
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
deleted file mode 100644
index 5ec29a1a846..00000000000
--- a/arch/x86/kernel/smpcommon.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * SMP stuff which is common to all sub-architectures.
- */
-#include <linux/module.h>
-#include <asm/smp.h>
-#include <asm/sections.h>
-
-#ifdef CONFIG_X86_32
-/*
- * Initialize the CPU's GDT.  This is either the boot CPU doing itself
- * (still using the master per-cpu area), or a CPU doing it for a
- * secondary which will soon come up.
- */
-__cpuinit void init_gdt(int cpu)
-{
-	struct desc_struct gdt;
-
-	pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF,
-			0x2 | DESCTYPE_S, 0x8);
-	gdt.s = 1;
-
-	write_gdt_entry(get_cpu_gdt_table(cpu),
-			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
-}
-#endif
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index dd82f2052f3..331cd6d5648 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -530,7 +530,6 @@ static void __init do_boot_cpu(__u8 cpu)
 	/* init_tasks (in sched.c) is indexed logically */
 	stack_start.sp = (void *)idle->thread.sp;
 
-	init_gdt(cpu);
 	per_cpu(current_task, cpu) = idle;
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	irq_ctx_init(cpu);
@@ -1747,7 +1746,6 @@ static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
 
 static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 {
-	init_gdt(smp_processor_id());
 	switch_to_new_gdt();
 
 	cpu_set(smp_processor_id(), cpu_online_map);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 72c2eb9b64c..7735e3dd359 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -281,7 +281,6 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 
 	per_cpu(current_task, cpu) = idle;
 #ifdef CONFIG_X86_32
-	init_gdt(cpu);
 	irq_ctx_init(cpu);
 #else
 	clear_tsk_thread_flag(idle, TIF_FORK);
-- 
cgit v1.2.3


From 1825b8edc2034c012ae48f797d74efd1bd9d4f72 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:48 +0900
Subject: x86: remove extra barriers from load_gs_base()

Impact: optimization

mb() generates an mfence instruction, which is not needed here.  Only
a compiler barrier is needed, and that is handled by the memory clobber
in the wrmsrl function.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/processor.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 32c30b02b51..794234eba31 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -397,10 +397,7 @@ DECLARE_PER_CPU(char *, irq_stack_ptr);
 
 static inline void load_gs_base(int cpu)
 {
-	/* Memory clobbers used to order pda/percpu accesses */
-	mb();
 	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
-	mb();
 }
 #endif
 
-- 
cgit v1.2.3


From 2697fbd5faf19c84c17441b1752bdcbdcfd1248c Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 27 Jan 2009 12:56:48 +0900
Subject: x86: load new GDT after setting up boot cpu per-cpu area

Impact: sync 32 and 64-bit code

Merge load_gs_base() into switch_to_new_gdt().  Load the GDT and
per-cpu state for the boot cpu when its new area is set up.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/processor.h |  5 -----
 arch/x86/kernel/cpu/common.c     | 15 +++++++++------
 arch/x86/kernel/setup_percpu.c   |  6 +++---
 3 files changed, 12 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 794234eba31..befa20b4a68 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -394,11 +394,6 @@ union irq_stack_union {
 
 DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
 DECLARE_PER_CPU(char *, irq_stack_ptr);
-
-static inline void load_gs_base(int cpu)
-{
-	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
-}
 #endif
 
 extern void print_cpu_info(struct cpuinfo_x86 *);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 67e30c8a282..0c766b80d91 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -258,12 +258,17 @@ __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
 void switch_to_new_gdt(void)
 {
 	struct desc_ptr gdt_descr;
+	int cpu = smp_processor_id();
 
-	gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+	gdt_descr.address = (long)get_cpu_gdt_table(cpu);
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
+	/* Reload the per-cpu base */
 #ifdef CONFIG_X86_32
-	asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
+	loadsegment(fs, __KERNEL_PERCPU);
+#else
+	loadsegment(gs, 0);
+	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
 #endif
 }
 
@@ -968,10 +973,6 @@ void __cpuinit cpu_init(void)
 	struct task_struct *me;
 	int i;
 
-	loadsegment(fs, 0);
-	loadsegment(gs, 0);
-	load_gs_base(cpu);
-
 #ifdef CONFIG_NUMA
 	if (cpu != 0 && percpu_read(node_number) == 0 &&
 	    cpu_to_node(cpu) != NUMA_NO_NODE)
@@ -993,6 +994,8 @@ void __cpuinit cpu_init(void)
 	 */
 
 	switch_to_new_gdt();
+	loadsegment(fs, 0);
+
 	load_idt((const struct desc_ptr *)&idt_descr);
 
 	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index bcca3a7b374..4caa78d7cb1 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -112,14 +112,14 @@ void __init setup_per_cpu_areas(void)
 #ifdef CONFIG_NUMA
 		per_cpu(x86_cpu_to_node_map, cpu) =
 				early_per_cpu_map(x86_cpu_to_node_map, cpu);
+#endif
 #endif
 		/*
 		 * Up to this point, the boot CPU has been using .data.init
-		 * area.  Reload %gs offset for the boot CPU.
+		 * area.  Reload any changed state for the boot CPU.
 		 */
 		if (cpu == boot_cpu_id)
-			load_gs_base(cpu);
-#endif
+			switch_to_new_gdt();
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
-- 
cgit v1.2.3


From 22f25138c345ec46a13744c93c093ff822cd98d1 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Tue, 27 Jan 2009 14:21:37 +0900
Subject: x86: fix build breakage on voyage

Impact: build fix

x86_cpu_to_apicid and x86_bios_cpu_apicid aren't defined for voyage.
Earlier patch forgot to conditionalize early percpu clearing.  Fix it.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 4caa78d7cb1..c7458ead22d 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -125,8 +125,10 @@ void __init setup_per_cpu_areas(void)
 	}
 
 	/* indicate the early static arrays will soon be gone */
+#ifdef CONFIG_X86_LOCAL_APIC
 	early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
 	early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
+#endif
 #if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
 	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
 #endif
-- 
cgit v1.2.3


From cf3997f507624757f149fcc42b76fb03c151fb65 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 27 Jan 2009 14:25:05 +0900
Subject: x86: clean up indentation in setup_per_cpu_areas()

Impact: cosmetic cleanup

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index c7458ead22d..0d1e7ac439f 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -96,22 +96,25 @@ void __init setup_per_cpu_areas(void)
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
 		/*
-		 * Copy data used in early init routines from the initial arrays to the
-		 * per cpu data areas.  These arrays then become expendable and the
-		 * *_early_ptr's are zeroed indicating that the static arrays are gone.
+		 * Copy data used in early init routines from the
+		 * initial arrays to the per cpu data areas.  These
+		 * arrays then become expendable and the *_early_ptr's
+		 * are zeroed indicating that the static arrays are
+		 * gone.
 		 */
 #ifdef CONFIG_X86_LOCAL_APIC
 		per_cpu(x86_cpu_to_apicid, cpu) =
-				early_per_cpu_map(x86_cpu_to_apicid, cpu);
+			early_per_cpu_map(x86_cpu_to_apicid, cpu);
 		per_cpu(x86_bios_cpu_apicid, cpu) =
-				early_per_cpu_map(x86_bios_cpu_apicid, cpu);
+			early_per_cpu_map(x86_bios_cpu_apicid, cpu);
 #endif
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
-			per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64;
+			per_cpu(irq_stack_union.irq_stack, cpu) +
+			IRQ_STACK_SIZE - 64;
 #ifdef CONFIG_NUMA
 		per_cpu(x86_cpu_to_node_map, cpu) =
-				early_per_cpu_map(x86_cpu_to_node_map, cpu);
+			early_per_cpu_map(x86_cpu_to_node_map, cpu);
 #endif
 #endif
 		/*
-- 
cgit v1.2.3


From 18801be7f805b891876a6676ec7fac2e1acdec13 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 25 Dec 2008 18:17:09 +0900
Subject: sh: make gpio_get/set_value() O(1)

This patch modifies the table based SuperH gpio implementation to
make use of direct table lookups. With this change the functions
gpio_get_value() and gpio_set_value() are O(1).

Tested on Migo-R using bitbanging mmc. Performance is improved from
11 KBytes/s to 26 Kbytes/s.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/gpio.h |  7 ++++++-
 arch/sh/kernel/gpio.c      | 48 +++++++++++++++++++++++++++++++++++-----------
 2 files changed, 43 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 90673658eb1..942fefa61c7 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -20,7 +20,7 @@
 #endif
 
 typedef unsigned short pinmux_enum_t;
-typedef unsigned char pinmux_flag_t;
+typedef unsigned short pinmux_flag_t;
 
 #define PINMUX_TYPE_NONE            0
 #define PINMUX_TYPE_FUNCTION        1
@@ -34,6 +34,11 @@ typedef unsigned char pinmux_flag_t;
 #define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
 #define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
 
+#define PINMUX_FLAG_DBIT_SHIFT      5
+#define PINMUX_FLAG_DBIT            (0x1f << PINMUX_FLAG_DBIT_SHIFT)
+#define PINMUX_FLAG_DREG_SHIFT      10
+#define PINMUX_FLAG_DREG            (0x3f << PINMUX_FLAG_DREG_SHIFT)
+
 struct pinmux_gpio {
 	pinmux_enum_t enum_id;
 	pinmux_flag_t flags;
diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
index d3716536103..fe92ba151b8 100644
--- a/arch/sh/kernel/gpio.c
+++ b/arch/sh/kernel/gpio.c
@@ -95,14 +95,13 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width,
 	return 0;
 }
 
-static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
-			struct pinmux_data_reg **drp, int *bitp)
+static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio)
 {
-	pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id;
+	struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
 	struct pinmux_data_reg *data_reg;
 	int k, n;
 
-	if (!enum_in_range(enum_id, &gpioc->data))
+	if (!enum_in_range(gpiop->enum_id, &gpioc->data))
 		return -1;
 
 	k = 0;
@@ -113,19 +112,38 @@ static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
 			break;
 
 		for (n = 0; n < data_reg->reg_width; n++) {
-			if (data_reg->enum_ids[n] == enum_id) {
-				*drp = data_reg;
-				*bitp = n;
+			if (data_reg->enum_ids[n] == gpiop->enum_id) {
+				gpiop->flags &= ~PINMUX_FLAG_DREG;
+				gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT);
+				gpiop->flags &= ~PINMUX_FLAG_DBIT;
+				gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT);
 				return 0;
-
 			}
 		}
 		k++;
 	}
 
+	BUG();
+
 	return -1;
 }
 
+static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
+			struct pinmux_data_reg **drp, int *bitp)
+{
+	struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
+	int k, n;
+
+	if (!enum_in_range(gpiop->enum_id, &gpioc->data))
+		return -1;
+
+	k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT;
+	n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT;
+	*drp = gpioc->data_regs + k;
+	*bitp = n;
+	return 0;
+}
+
 static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
 			  struct pinmux_cfg_reg **crp, int *indexp,
 			  unsigned long **cntp)
@@ -341,7 +359,8 @@ int __gpio_request(unsigned gpio)
 			BUG();
 	}
 
-	gpioc->gpios[gpio].flags = pinmux_type;
+	gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
+	gpioc->gpios[gpio].flags |= pinmux_type;
 
 	ret = 0;
  err_unlock:
@@ -364,7 +383,8 @@ void gpio_free(unsigned gpio)
 
 	pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
 	pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
-	gpioc->gpios[gpio].flags = PINMUX_TYPE_NONE;
+	gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
+	gpioc->gpios[gpio].flags |= PINMUX_TYPE_NONE;
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
@@ -401,7 +421,8 @@ static int pinmux_direction(struct pinmux_info *gpioc,
 			       GPIO_CFG_REQ) != 0)
 		BUG();
 
-	gpioc->gpios[gpio].flags = new_pinmux_type;
+	gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
+	gpioc->gpios[gpio].flags |= new_pinmux_type;
 
 	ret = 0;
  err_out:
@@ -494,9 +515,14 @@ EXPORT_SYMBOL(gpio_set_value);
 
 int register_pinmux(struct pinmux_info *pip)
 {
+	int k;
+
 	registered_gpio = pip;
 	pr_info("pinmux: %s handling gpio %d -> %d\n",
 		pip->name, pip->first_gpio, pip->last_gpio);
 
+	for (k = pip->first_gpio; k <= pip->last_gpio; k++)
+		setup_data_reg(pip, k);
+
 	return 0;
 }
-- 
cgit v1.2.3


From 0fc64cc0a27288e77ee8e12648d59632649371fc Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 25 Dec 2008 18:17:18 +0900
Subject: sh: lockless gpio_get_value()

This patch separates the register read and write functions to
allow lockless gpio_get_value().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/gpio.c | 126 +++++++++++++++++++++++++-------------------------
 1 file changed, 63 insertions(+), 63 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
index fe92ba151b8..f8397a09491 100644
--- a/arch/sh/kernel/gpio.c
+++ b/arch/sh/kernel/gpio.c
@@ -46,9 +46,8 @@ static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
 	return 1;
 }
 
-static int read_write_reg(unsigned long reg, unsigned long reg_width,
-			  unsigned long field_width, unsigned long in_pos,
-			  unsigned long value, int do_write)
+static int gpio_read_reg(unsigned long reg, unsigned long reg_width,
+			 unsigned long field_width, unsigned long in_pos)
 {
 	unsigned long data, mask, pos;
 
@@ -57,10 +56,9 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width,
 	pos = reg_width - ((in_pos + 1) * field_width);
 
 #ifdef DEBUG
-	pr_info("%s, addr = %lx, value = %ld, pos = %ld, "
+	pr_info("read_reg: addr = %lx, pos = %ld, "
 		"r_width = %ld, f_width = %ld\n",
-		do_write ? "write" : "read", reg, value, pos,
-		reg_width, field_width);
+		reg, pos, reg_width, field_width);
 #endif
 
 	switch (reg_width) {
@@ -75,24 +73,38 @@ static int read_write_reg(unsigned long reg, unsigned long reg_width,
 		break;
 	}
 
-	if (!do_write)
-		return (data >> pos) & mask;
+	return (data >> pos) & mask;
+}
+
+static void gpio_write_reg(unsigned long reg, unsigned long reg_width,
+			   unsigned long field_width, unsigned long in_pos,
+			   unsigned long value)
+{
+	unsigned long mask, pos;
+
+	mask = (1 << field_width) - 1;
+	pos = reg_width - ((in_pos + 1) * field_width);
 
-	data &= ~(mask << pos);
-	data |= value << pos;
+#ifdef DEBUG
+	pr_info("write_reg addr = %lx, value = %ld, pos = %ld, "
+		"r_width = %ld, f_width = %ld\n",
+		reg, value, pos, reg_width, field_width);
+#endif
+
+	mask = ~(mask << pos);
+	value = value << pos;
 
 	switch (reg_width) {
 	case 8:
-		ctrl_outb(data, reg);
+		ctrl_outb((ctrl_inb(reg) & mask) | value, reg);
 		break;
 	case 16:
-		ctrl_outw(data, reg);
+		ctrl_outw((ctrl_inw(reg) & mask) | value, reg);
 		break;
 	case 32:
-		ctrl_outl(data, reg);
+		ctrl_outl((ctrl_inl(reg) & mask) | value, reg);
 		break;
 	}
-	return 0;
 }
 
 static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio)
@@ -205,9 +217,9 @@ static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio,
 	return -1;
 }
 
-static int write_config_reg(struct pinmux_info *gpioc,
-			    struct pinmux_cfg_reg *crp,
-			    int index)
+static void write_config_reg(struct pinmux_info *gpioc,
+			     struct pinmux_cfg_reg *crp,
+			     int index)
 {
 	unsigned long ncomb, pos, value;
 
@@ -215,8 +227,7 @@ static int write_config_reg(struct pinmux_info *gpioc,
 	pos = index / ncomb;
 	value = index % ncomb;
 
-	return read_write_reg(crp->reg, crp->reg_width,
-			      crp->field_width, pos, value, 1);
+	gpio_write_reg(crp->reg, crp->reg_width, crp->field_width, pos, value);
 }
 
 static int check_config_reg(struct pinmux_info *gpioc,
@@ -229,8 +240,8 @@ static int check_config_reg(struct pinmux_info *gpioc,
 	pos = index / ncomb;
 	value = index % ncomb;
 
-	if (read_write_reg(crp->reg, crp->reg_width,
-			   crp->field_width, pos, 0, 0) == value)
+	if (gpio_read_reg(crp->reg, crp->reg_width,
+			  crp->field_width, pos) == value)
 		return 0;
 
 	return -1;
@@ -238,8 +249,8 @@ static int check_config_reg(struct pinmux_info *gpioc,
 
 enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE };
 
-int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
-		       int pinmux_type, int cfg_mode)
+static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
+			      int pinmux_type, int cfg_mode)
 {
 	struct pinmux_cfg_reg *cr = NULL;
 	pinmux_enum_t enum_id;
@@ -305,8 +316,7 @@ int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
 			break;
 
 		case GPIO_CFG_REQ:
-			if (write_config_reg(gpioc, cr, index) != 0)
-				goto out_err;
+			write_config_reg(gpioc, cr, index);
 			*cntp = *cntp + 1;
 			break;
 
@@ -393,9 +403,12 @@ EXPORT_SYMBOL(gpio_free);
 static int pinmux_direction(struct pinmux_info *gpioc,
 			    unsigned gpio, int new_pinmux_type)
 {
-	int ret, pinmux_type;
+	int pinmux_type;
+	int ret = -EINVAL;
+
+	if (!gpioc)
+		goto err_out;
 
-	ret = -EINVAL;
 	pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
 
 	switch (pinmux_type) {
@@ -433,68 +446,59 @@ int gpio_direction_input(unsigned gpio)
 {
 	struct pinmux_info *gpioc = gpio_controller(gpio);
 	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!gpioc)
-		goto err_out;
+	int ret;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT);
 	spin_unlock_irqrestore(&gpio_lock, flags);
- err_out:
+
 	return ret;
 }
 EXPORT_SYMBOL(gpio_direction_input);
 
-static int __gpio_get_set_value(struct pinmux_info *gpioc,
-				unsigned gpio, int value,
-				int do_write)
+static void __gpio_set_value(struct pinmux_info *gpioc,
+			     unsigned gpio, int value)
 {
 	struct pinmux_data_reg *dr = NULL;
 	int bit = 0;
 
-	if (get_data_reg(gpioc, gpio, &dr, &bit) != 0)
+	if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0)
 		BUG();
 	else
-		value = read_write_reg(dr->reg, dr->reg_width,
-				       1, bit, !!value, do_write);
-
-	return value;
+		gpio_write_reg(dr->reg, dr->reg_width, 1, bit, !!value);
 }
 
 int gpio_direction_output(unsigned gpio, int value)
 {
 	struct pinmux_info *gpioc = gpio_controller(gpio);
 	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!gpioc)
-		goto err_out;
+	int ret;
 
 	spin_lock_irqsave(&gpio_lock, flags);
-	__gpio_get_set_value(gpioc, gpio, value, 1);
+	__gpio_set_value(gpioc, gpio, value);
 	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT);
 	spin_unlock_irqrestore(&gpio_lock, flags);
- err_out:
+
 	return ret;
 }
 EXPORT_SYMBOL(gpio_direction_output);
 
-int gpio_get_value(unsigned gpio)
+static int __gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
 {
-	struct pinmux_info *gpioc = gpio_controller(gpio);
-	unsigned long flags;
-	int value = 0;
+	struct pinmux_data_reg *dr = NULL;
+	int bit = 0;
 
-	if (!gpioc)
+	if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) {
 		BUG();
-	else {
-		spin_lock_irqsave(&gpio_lock, flags);
-		value = __gpio_get_set_value(gpioc, gpio, 0, 0);
-		spin_unlock_irqrestore(&gpio_lock, flags);
+		return 0;
 	}
 
-	return value;
+	return gpio_read_reg(dr->reg, dr->reg_width, 1, bit);
+}
+
+int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio_controller(gpio), gpio);
 }
 EXPORT_SYMBOL(gpio_get_value);
 
@@ -503,13 +507,9 @@ void gpio_set_value(unsigned gpio, int value)
 	struct pinmux_info *gpioc = gpio_controller(gpio);
 	unsigned long flags;
 
-	if (!gpioc)
-		BUG();
-	else {
-		spin_lock_irqsave(&gpio_lock, flags);
-		__gpio_get_set_value(gpioc, gpio, value, 1);
-		spin_unlock_irqrestore(&gpio_lock, flags);
-	}
+	spin_lock_irqsave(&gpio_lock, flags);
+	__gpio_set_value(gpioc, gpio, value);
+	spin_unlock_irqrestore(&gpio_lock, flags);
 }
 EXPORT_SYMBOL(gpio_set_value);
 
-- 
cgit v1.2.3


From 3292094e88ce6b76714dad8ec4b43d7c5c12ada2 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 25 Dec 2008 18:17:26 +0900
Subject: sh: lockless gpio_set_value()

This patch optimizes the gpio data register handling for gpio_set_value().

Instead of using the good old spinlock-plus-read-modify-write strategy
we now use a shadow register and atomic operations.

This improves the bitbanging mmc performance on Migo-R from 26 Kbytes/s
to 40 Kbytes/s.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/gpio.h |   2 +-
 arch/sh/kernel/gpio.c      | 106 ++++++++++++++++++++++++++++++++++-----------
 2 files changed, 82 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 942fefa61c7..46a6d7914df 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -59,7 +59,7 @@ struct pinmux_cfg_reg {
 	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
 
 struct pinmux_data_reg {
-	unsigned long reg, reg_width;
+	unsigned long reg, reg_width, reg_shadow;
 	pinmux_enum_t *enum_ids;
 };
 
diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
index f8397a09491..28013567372 100644
--- a/arch/sh/kernel/gpio.c
+++ b/arch/sh/kernel/gpio.c
@@ -46,6 +46,62 @@ static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
 	return 1;
 }
 
+static unsigned long gpio_read_raw_reg(unsigned long reg,
+				       unsigned long reg_width)
+{
+	switch (reg_width) {
+	case 8:
+		return ctrl_inb(reg);
+	case 16:
+		return ctrl_inw(reg);
+	case 32:
+		return ctrl_inl(reg);
+	}
+
+	BUG();
+	return 0;
+}
+
+static void gpio_write_raw_reg(unsigned long reg,
+			       unsigned long reg_width,
+			       unsigned long data)
+{
+	switch (reg_width) {
+	case 8:
+		ctrl_outb(data, reg);
+		return;
+	case 16:
+		ctrl_outw(data, reg);
+		return;
+	case 32:
+		ctrl_outl(data, reg);
+		return;
+	}
+
+	BUG();
+}
+
+static void gpio_write_bit(struct pinmux_data_reg *dr,
+			   unsigned long in_pos, unsigned long value)
+{
+	unsigned long pos;
+
+	pos = dr->reg_width - (in_pos + 1);
+
+#ifdef DEBUG
+	pr_info("write_bit addr = %lx, value = %ld, pos = %ld, "
+		"r_width = %ld\n",
+		dr->reg, !!value, pos, dr->reg_width);
+#endif
+
+	if (value)
+		set_bit(pos, &dr->reg_shadow);
+	else
+		clear_bit(pos, &dr->reg_shadow);
+
+	gpio_write_raw_reg(dr->reg, dr->reg_width, dr->reg_shadow);
+}
+
 static int gpio_read_reg(unsigned long reg, unsigned long reg_width,
 			 unsigned long field_width, unsigned long in_pos)
 {
@@ -61,18 +117,7 @@ static int gpio_read_reg(unsigned long reg, unsigned long reg_width,
 		reg, pos, reg_width, field_width);
 #endif
 
-	switch (reg_width) {
-	case 8:
-		data = ctrl_inb(reg);
-		break;
-	case 16:
-		data = ctrl_inw(reg);
-		break;
-	case 32:
-		data = ctrl_inl(reg);
-		break;
-	}
-
+	data = gpio_read_raw_reg(reg, reg_width);
 	return (data >> pos) & mask;
 }
 
@@ -140,6 +185,26 @@ static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio)
 	return -1;
 }
 
+static void setup_data_regs(struct pinmux_info *gpioc)
+{
+	struct pinmux_data_reg *drp;
+	int k;
+
+	for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++)
+		setup_data_reg(gpioc, k);
+
+	k = 0;
+	while (1) {
+		drp = gpioc->data_regs + k;
+
+		if (!drp->reg_width)
+			break;
+
+		drp->reg_shadow = gpio_read_raw_reg(drp->reg, drp->reg_width);
+		k++;
+	}
+}
+
 static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
 			struct pinmux_data_reg **drp, int *bitp)
 {
@@ -465,7 +530,7 @@ static void __gpio_set_value(struct pinmux_info *gpioc,
 	if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0)
 		BUG();
 	else
-		gpio_write_reg(dr->reg, dr->reg_width, 1, bit, !!value);
+		gpio_write_bit(dr, bit, value);
 }
 
 int gpio_direction_output(unsigned gpio, int value)
@@ -474,8 +539,8 @@ int gpio_direction_output(unsigned gpio, int value)
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&gpio_lock, flags);
 	__gpio_set_value(gpioc, gpio, value);
+	spin_lock_irqsave(&gpio_lock, flags);
 	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT);
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
@@ -504,25 +569,16 @@ EXPORT_SYMBOL(gpio_get_value);
 
 void gpio_set_value(unsigned gpio, int value)
 {
-	struct pinmux_info *gpioc = gpio_controller(gpio);
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-	__gpio_set_value(gpioc, gpio, value);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	__gpio_set_value(gpio_controller(gpio), gpio, value);
 }
 EXPORT_SYMBOL(gpio_set_value);
 
 int register_pinmux(struct pinmux_info *pip)
 {
-	int k;
-
 	registered_gpio = pip;
+	setup_data_regs(pip);
 	pr_info("pinmux: %s handling gpio %d -> %d\n",
 		pip->name, pip->first_gpio, pip->last_gpio);
 
-	for (k = pip->first_gpio; k <= pip->last_gpio; k++)
-		setup_data_reg(pip, k);
-
 	return 0;
 }
-- 
cgit v1.2.3


From 69edbba0021a48fe034849501513930f6175cb5d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 25 Dec 2008 18:17:34 +0900
Subject: sh: use gpiolib

This patch updates the SuperH gpio code to make use of gpiolib. The
gpiolib callbacks get() and set() are lockless, but we use our own
spinlock for the other operations to make sure hardware register
bitfield accesses stay atomic.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig            |   7 +++
 arch/sh/boards/Kconfig     |   4 +-
 arch/sh/include/asm/gpio.h |  61 +++++++++++++++-----------
 arch/sh/kernel/Makefile_32 |   2 +-
 arch/sh/kernel/Makefile_64 |   2 +-
 arch/sh/kernel/gpio.c      | 106 ++++++++++++++++++++++-----------------------
 6 files changed, 99 insertions(+), 83 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ebabe518e72..3a2be227894 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
+config ARCH_WANT_OPTIONAL_GPIOLIB
+	def_bool y
+	depends on !ARCH_REQUIRE_GPIOLIB
+
+config ARCH_REQUIRE_GPIOLIB
+	def_bool n
+
 config IO_TRAPPED
 	bool
 
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 861914747e4..802d5c475a7 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -165,7 +165,7 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
@@ -173,7 +173,7 @@ config SH_MIGOR
 config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 46a6d7914df..61f93da2c62 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -19,6 +19,40 @@
 #include <cpu/gpio.h>
 #endif
 
+#define ARCH_NR_GPIOS 512
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	WARN_ON(1);
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
 typedef unsigned short pinmux_enum_t;
 typedef unsigned short pinmux_flag_t;
 
@@ -94,34 +128,9 @@ struct pinmux_info {
 	unsigned int gpio_data_size;
 
 	unsigned long *gpio_in_use;
+	struct gpio_chip chip;
 };
 
 int register_pinmux(struct pinmux_info *pip);
 
-int __gpio_request(unsigned gpio);
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return __gpio_request(gpio);
-}
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-
-/* IRQ modes are unspported */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-#include <asm-generic/gpio.h>
-
 #endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 2e1b86e16ab..7e7d22b5b4c 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -27,7 +27,7 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB)	+= gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index fe425d7f687..cbcbbb6c049 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -15,6 +15,6 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB)	+= gpio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
index 28013567372..d22e5af699f 100644
--- a/arch/sh/kernel/gpio.c
+++ b/arch/sh/kernel/gpio.c
@@ -19,22 +19,6 @@
 #include <linux/bitops.h>
 #include <linux/gpio.h>
 
-static struct pinmux_info *registered_gpio;
-
-static struct pinmux_info *gpio_controller(unsigned gpio)
-{
-	if (!registered_gpio)
-		return NULL;
-
-	if (gpio < registered_gpio->first_gpio)
-		return NULL;
-
-	if (gpio > registered_gpio->last_gpio)
-		return NULL;
-
-	return registered_gpio;
-}
-
 static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
 {
 	if (enum_id < r->begin)
@@ -398,9 +382,14 @@ static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
 
 static DEFINE_SPINLOCK(gpio_lock);
 
-int __gpio_request(unsigned gpio)
+static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip)
 {
-	struct pinmux_info *gpioc = gpio_controller(gpio);
+	return container_of(chip, struct pinmux_info, chip);
+}
+
+static int sh_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct pinmux_info *gpioc = chip_to_pinmux(chip);
 	struct pinmux_data_reg *dummy;
 	unsigned long flags;
 	int i, ret, pinmux_type;
@@ -412,30 +401,30 @@ int __gpio_request(unsigned gpio)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	if ((gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
+	if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
 		goto err_unlock;
 
 	/* setup pin function here if no data is associated with pin */
 
-	if (get_data_reg(gpioc, gpio, &dummy, &i) != 0)
+	if (get_data_reg(gpioc, offset, &dummy, &i) != 0)
 		pinmux_type = PINMUX_TYPE_FUNCTION;
 	else
 		pinmux_type = PINMUX_TYPE_GPIO;
 
 	if (pinmux_type == PINMUX_TYPE_FUNCTION) {
-		if (pinmux_config_gpio(gpioc, gpio,
+		if (pinmux_config_gpio(gpioc, offset,
 				       pinmux_type,
 				       GPIO_CFG_DRYRUN) != 0)
 			goto err_unlock;
 
-		if (pinmux_config_gpio(gpioc, gpio,
+		if (pinmux_config_gpio(gpioc, offset,
 				       pinmux_type,
 				       GPIO_CFG_REQ) != 0)
 			BUG();
 	}
 
-	gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
-	gpioc->gpios[gpio].flags |= pinmux_type;
+	gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
+	gpioc->gpios[offset].flags |= pinmux_type;
 
 	ret = 0;
  err_unlock:
@@ -443,11 +432,10 @@ int __gpio_request(unsigned gpio)
  err_out:
 	return ret;
 }
-EXPORT_SYMBOL(__gpio_request);
 
-void gpio_free(unsigned gpio)
+static void sh_gpio_free(struct gpio_chip *chip, unsigned offset)
 {
-	struct pinmux_info *gpioc = gpio_controller(gpio);
+	struct pinmux_info *gpioc = chip_to_pinmux(chip);
 	unsigned long flags;
 	int pinmux_type;
 
@@ -456,14 +444,13 @@ void gpio_free(unsigned gpio)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
-	pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
-	gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
-	gpioc->gpios[gpio].flags |= PINMUX_TYPE_NONE;
+	pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE;
+	pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE);
+	gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
+	gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE;
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(gpio_free);
 
 static int pinmux_direction(struct pinmux_info *gpioc,
 			    unsigned gpio, int new_pinmux_type)
@@ -507,21 +494,20 @@ static int pinmux_direction(struct pinmux_info *gpioc,
 	return ret;
 }
 
-int gpio_direction_input(unsigned gpio)
+static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct pinmux_info *gpioc = gpio_controller(gpio);
+	struct pinmux_info *gpioc = chip_to_pinmux(chip);
 	unsigned long flags;
 	int ret;
 
 	spin_lock_irqsave(&gpio_lock, flags);
-	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT);
+	ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT);
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	return ret;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-static void __gpio_set_value(struct pinmux_info *gpioc,
+static void sh_gpio_set_value(struct pinmux_info *gpioc,
 			     unsigned gpio, int value)
 {
 	struct pinmux_data_reg *dr = NULL;
@@ -533,22 +519,22 @@ static void __gpio_set_value(struct pinmux_info *gpioc,
 		gpio_write_bit(dr, bit, value);
 }
 
-int gpio_direction_output(unsigned gpio, int value)
+static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				    int value)
 {
-	struct pinmux_info *gpioc = gpio_controller(gpio);
+	struct pinmux_info *gpioc = chip_to_pinmux(chip);
 	unsigned long flags;
 	int ret;
 
-	__gpio_set_value(gpioc, gpio, value);
+	sh_gpio_set_value(gpioc, offset, value);
 	spin_lock_irqsave(&gpio_lock, flags);
-	ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT);
+	ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT);
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
 	return ret;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-static int __gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
+static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
 {
 	struct pinmux_data_reg *dr = NULL;
 	int bit = 0;
@@ -561,24 +547,38 @@ static int __gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
 	return gpio_read_reg(dr->reg, dr->reg_width, 1, bit);
 }
 
-int gpio_get_value(unsigned gpio)
+static int sh_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __gpio_get_value(gpio_controller(gpio), gpio);
+	return sh_gpio_get_value(chip_to_pinmux(chip), offset);
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-void gpio_set_value(unsigned gpio, int value)
+static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	__gpio_set_value(gpio_controller(gpio), gpio, value);
+	sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
 }
-EXPORT_SYMBOL(gpio_set_value);
 
 int register_pinmux(struct pinmux_info *pip)
 {
-	registered_gpio = pip;
-	setup_data_regs(pip);
-	pr_info("pinmux: %s handling gpio %d -> %d\n",
+	struct gpio_chip *chip = &pip->chip;
+
+	pr_info("sh pinmux: %s handling gpio %d -> %d\n",
 		pip->name, pip->first_gpio, pip->last_gpio);
 
-	return 0;
+	setup_data_regs(pip);
+
+	chip->request = sh_gpio_request;
+	chip->free = sh_gpio_free;
+	chip->direction_input = sh_gpio_direction_input;
+	chip->get = sh_gpio_get;
+	chip->direction_output = sh_gpio_direction_output;
+	chip->set = sh_gpio_set;
+
+	WARN_ON(pip->first_gpio != 0); /* needs testing */
+
+	chip->label = pip->name;
+	chip->owner = THIS_MODULE;
+	chip->base = pip->first_gpio;
+	chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1;
+
+	return gpiochip_add(chip);
 }
-- 
cgit v1.2.3


From 57e97cb8bedd06e8a2e562454423d58aab5827ce Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 6 Jan 2009 12:47:12 +0900
Subject: sh: Fix up GENERIC_GPIO build for ARCH_WANT_OPTIONAL_GPIO cases.

CPUs define pinmux tables through the optional interface, while boards
that require demux of their own require it explicitly. Roll the Makefile
rules back to depend on GENERIC_GPIO, which covers both cases.

Fixes a link error with an undefined reference to register_pinmux() on
optional platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/Makefile_32 | 2 +-
 arch/sh/kernel/Makefile_64 | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 7e7d22b5b4c..2e1b86e16ab 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -27,7 +27,7 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB)	+= gpio.o
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index cbcbbb6c049..fe425d7f687 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -15,6 +15,6 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
-obj-$(CONFIG_ARCH_REQUIRE_GPIOLIB)	+= gpio.o
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 
 EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From ae5e6d05a606e05e054f816bd01e02f69d38d283 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 7 Jan 2009 17:16:25 +0900
Subject: sh: mach-highlander and mach-rsk require gpiolib.

Fix up the build for mach-highlander and mach-rsk. These operated on the
assumption that GENERIC_GPIO support with an optional GPIOLIB was
possible. This used to be true, but has not been the case since commit-id
d56cc8bc661ac1ceded8d45ba2d53bb134fee17d ("sh: use gpiolib"), where the
GENERIC_GPIO implementation was rewritten to use GPIOLIB directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                        | 7 -------
 arch/sh/boards/Kconfig                 | 2 +-
 arch/sh/boards/mach-highlander/Kconfig | 2 +-
 arch/sh/boards/mach-rsk/Kconfig        | 2 +-
 4 files changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 3a2be227894..ebabe518e72 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -126,13 +126,6 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
-config ARCH_WANT_OPTIONAL_GPIOLIB
-	def_bool y
-	depends on !ARCH_REQUIRE_GPIOLIB
-
-config ARCH_REQUIRE_GPIOLIB
-	def_bool n
-
 config IO_TRAPPED
 	bool
 
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 802d5c475a7..c9da37088d2 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -240,7 +240,7 @@ config SH_X3PROTO
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
 
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index 08057f62687..def49cc0a7b 100644
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
@@ -18,7 +18,7 @@ config SH_R7780MP
 config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 
 endchoice
 
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
index bff095dffc0..aeff3b04220 100644
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -10,7 +10,7 @@ config SH_RSK7201
 
 config SH_RSK7203
 	bool "RSK7203"
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	depends on CPU_SUBTYPE_SH7203
 
 endchoice
-- 
cgit v1.2.3


From 042cbaf88ab48e11afb725541e3c2cbf5b483680 Mon Sep 17 00:00:00 2001
From: Andreas Schwab <schwab@suse.de>
Date: Tue, 27 Jan 2009 21:45:57 +0100
Subject: x86 setup: fix asm constraints in vesa_store_edid

Impact: fix potential miscompile (currently believed non-manifest)

As the comment explains, the VBE DDC call can clobber any register.
Tell the compiler about that fact.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/boot/video-vesa.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 75115849af3..4a58c8ce3f6 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -269,9 +269,8 @@ void vesa_store_edid(void)
 	   we genuinely have to assume all registers are destroyed here. */
 
 	asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
-	    : "+a" (ax), "+b" (bx)
-	    :  "c" (cx), "D" (di)
-	    : "esi");
+	    : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di)
+	    : : "esi", "edx");
 
 	if (ax != 0x004f)
 		return;		/* No EDID */
@@ -285,9 +284,9 @@ void vesa_store_edid(void)
 	dx = 0;			/* EDID block number */
 	di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
 	asm(INT10
-	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info)
-	    : "c" (cx), "D" (di)
-	    : "esi");
+	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info),
+	      "+c" (cx), "+D" (di)
+	    : : "esi");
 #endif /* CONFIG_FIRMWARE_EDID */
 }
 
-- 
cgit v1.2.3


From 8f6d86dc4178957d9814b1784848012a927a3898 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Tue, 27 Jan 2009 21:41:34 +0100
Subject: x86: cpu_init(): remove ugly #ifdef construct around debug register
 clear

Impact: Cleanup

While I was looking through the new and improved bootstrap code - great
work that, thanks! I found the below a slight improvement.

Remove unnecessary ugly #ifdef construct around debug register clear.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/common.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f0025846244..3f272d42d09 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1071,22 +1071,19 @@ void __cpuinit cpu_init(void)
 	 */
 	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
 		arch_kgdb_ops.correct_hw_break();
-	else {
+	else
 #endif
-	/*
-	 * Clear all 6 debug registers:
-	 */
-
-	set_debugreg(0UL, 0);
-	set_debugreg(0UL, 1);
-	set_debugreg(0UL, 2);
-	set_debugreg(0UL, 3);
-	set_debugreg(0UL, 6);
-	set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
-	/* If the kgdb is connected no debug regs should be altered. */
+	{
+		/*
+		 * Clear all 6 debug registers:
+		 */
+		set_debugreg(0UL, 0);
+		set_debugreg(0UL, 1);
+		set_debugreg(0UL, 2);
+		set_debugreg(0UL, 3);
+		set_debugreg(0UL, 6);
+		set_debugreg(0UL, 7);
 	}
-#endif
 
 	fpu_init();
 
-- 
cgit v1.2.3


From 6e7a59944a2971c4fb400bfbecb2f68570086b05 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 23:07:42 +0100
Subject: x86, genapic: refactor genapic_64.h

Impact: pre unification cleanup

Make genapic_64.h similar to genapic_32.h: reorder fields, unify types
and bring in new entries.

No existing functionality is affected.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic_64.h | 68 +++++++++++++++++++++++++++++++++------
 1 file changed, 59 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h
index 7bb092c5905..0a5f7122d9f 100644
--- a/arch/x86/include/asm/genapic_64.h
+++ b/arch/x86/include/asm/genapic_64.h
@@ -16,13 +16,62 @@
 
 struct genapic {
 	char *name;
+
+	int (*probe)(void);
 	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	int (*apic_id_registered)(void);
+
 	u32 int_delivery_mode;
 	u32 int_dest_mode;
-	int (*apic_id_registered)(void);
+
 	const struct cpumask *(*target_cpus)(void);
+
+	int ESR_DISABLE;
+
+	int apic_destination_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid);
+
+	int no_balance_irq;
+	int no_ioapic_check;
+
 	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
 	void (*init_apic_ldr)(void);
+
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*setup_apic_routing)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid);
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*setup_portio_remap)(void);
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+#ifdef CONFIG_X86_32
+	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
+#else
+	unsigned int (*phys_pkg_id)(int index_msb);
+#endif
+
+	/*
+	 * When one of the next two hooks returns 1 the genapic
+	 * is switched to this. Essentially they are additional
+	 * probe functions:
+	 */
+	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
+			     char *productid);
+
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
+
+	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
+	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
+					       const struct cpumask *andmask);
+
+#ifdef CONFIG_SMP
 	/* ipi */
 	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
 	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
@@ -30,16 +79,17 @@ struct genapic {
 	void (*send_IPI_allbutself)(int vector);
 	void (*send_IPI_all)(int vector);
 	void (*send_IPI_self)(int vector);
-	/* */
-	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
-	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
-					       const struct cpumask *andmask);
-	unsigned int (*phys_pkg_id)(int index_msb);
-	unsigned int (*get_apic_id)(unsigned long x);
-	unsigned long (*set_apic_id)(unsigned int id);
-	unsigned long apic_id_mask;
+#endif
 	/* wakeup_secondary_cpu */
 	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
+
+	int trampoline_phys_low;
+	int trampoline_phys_high;
+	void (*wait_for_init_deassert)(atomic_t *deassert);
+	void (*smp_callin_clear_local_apic)(void);
+	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
+	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
+	void (*inquire_remote_apic)(int apicid);
 };
 
 extern struct genapic *genapic;
-- 
cgit v1.2.3


From 943d0f74d47724d0e33083674c16a834f080af2c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 23:07:42 +0100
Subject: x86, genapic: refactor genapic_32.h

Impact: pre unification cleanup

Make genapic_32.h similar to genapic_64.h: reorder fields, unify types
and bring in new entries.

No existing functionality is affected.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic_32.h | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h
index 4334502d366..5808b7daf0a 100644
--- a/arch/x86/include/asm/genapic_32.h
+++ b/arch/x86/include/asm/genapic_32.h
@@ -21,19 +21,28 @@ struct mpc_cpu;
 
 struct genapic {
 	char *name;
-	int (*probe)(void);
 
+	int (*probe)(void);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
 	int (*apic_id_registered)(void);
+
+	u32 int_delivery_mode;
+	u32 int_dest_mode;
+
 	const struct cpumask *(*target_cpus)(void);
-	int int_delivery_mode;
-	int int_dest_mode;
+
 	int ESR_DISABLE;
+
 	int apic_destination_logical;
 	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
 	unsigned long (*check_apicid_present)(int apicid);
+
 	int no_balance_irq;
 	int no_ioapic_check;
+
+	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
 	void (*init_apic_ldr)(void);
+
 	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
 
 	void (*setup_apic_routing)(void);
@@ -45,22 +54,27 @@ struct genapic {
 	void (*setup_portio_remap)(void);
 	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
 	void (*enable_apic_mode)(void);
+#ifdef CONFIG_X86_32
 	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
+#else
+	unsigned int (*phys_pkg_id)(int index_msb);
+#endif
 
-	/* mpparse */
-	/* When one of the next two hooks returns 1 the genapic
-	   is switched to this. Essentially they are additional probe
-	   functions. */
+	/*
+	 * When one of the next two hooks returns 1 the genapic
+	 * is switched to this. Essentially they are additional
+	 * probe functions:
+	 */
 	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
 			     char *productid);
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
 
-	unsigned (*get_apic_id)(unsigned long x);
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
 	unsigned long apic_id_mask;
+
 	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
 	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
 					       const struct cpumask *andmask);
-	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
 
 #ifdef CONFIG_SMP
 	/* ipi */
@@ -69,8 +83,11 @@ struct genapic {
 					 int vector);
 	void (*send_IPI_allbutself)(int vector);
 	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
 #endif
+	/* wakeup_secondary_cpu */
 	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
+
 	int trampoline_phys_low;
 	int trampoline_phys_high;
 	void (*wait_for_init_deassert)(atomic_t *deassert);
-- 
cgit v1.2.3


From ef7471b13f3ef81074af1972b97355df9df3cdf3 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 23:12:02 +0100
Subject: x86, genapic: unify struct genapic

Move over the (now identical) struct genapic definitions from
genapic_32/64.h to genapic.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h    | 96 +++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/genapic_32.h | 93 -------------------------------------
 arch/x86/include/asm/genapic_64.h | 91 -------------------------------------
 3 files changed, 96 insertions(+), 184 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index d48bee663a6..3dea66a328e 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -1,5 +1,101 @@
+#ifndef _ASM_X86_GENAPIC_H
+#define _ASM_X86_GENAPIC_H
+
+#include <linux/cpumask.h>
+
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch data struct.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+
+struct genapic {
+	char *name;
+
+	int (*probe)(void);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	int (*apic_id_registered)(void);
+
+	u32 int_delivery_mode;
+	u32 int_dest_mode;
+
+	const struct cpumask *(*target_cpus)(void);
+
+	int ESR_DISABLE;
+
+	int apic_destination_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid);
+
+	int no_balance_irq;
+	int no_ioapic_check;
+
+	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
+	void (*init_apic_ldr)(void);
+
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*setup_apic_routing)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid);
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*setup_portio_remap)(void);
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+#ifdef CONFIG_X86_32
+	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
+#else
+	unsigned int (*phys_pkg_id)(int index_msb);
+#endif
+
+	/*
+	 * When one of the next two hooks returns 1 the genapic
+	 * is switched to this. Essentially they are additional
+	 * probe functions:
+	 */
+	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
+			     char *productid);
+
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
+
+	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
+	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
+					       const struct cpumask *andmask);
+
+#ifdef CONFIG_SMP
+	/* ipi */
+	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
+	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
+					 int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
+#endif
+	/* wakeup_secondary_cpu */
+	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
+
+	int trampoline_phys_low;
+	int trampoline_phys_high;
+	void (*wait_for_init_deassert)(atomic_t *deassert);
+	void (*smp_callin_clear_local_apic)(void);
+	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
+	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
+	void (*inquire_remote_apic)(int apicid);
+};
+
 #ifdef CONFIG_X86_32
 # include "genapic_32.h"
 #else
 # include "genapic_64.h"
 #endif
+
+#endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h
index 5808b7daf0a..a56785ed12a 100644
--- a/arch/x86/include/asm/genapic_32.h
+++ b/arch/x86/include/asm/genapic_32.h
@@ -4,99 +4,6 @@
 #include <asm/mpspec.h>
 #include <asm/atomic.h>
 
-/*
- * Generic APIC driver interface.
- *
- * An straight forward mapping of the APIC related parts of the
- * x86 subarchitecture interface to a dynamic object.
- *
- * This is used by the "generic" x86 subarchitecture.
- *
- * Copyright 2003 Andi Kleen, SuSE Labs.
- */
-
-struct mpc_bus;
-struct mpc_table;
-struct mpc_cpu;
-
-struct genapic {
-	char *name;
-
-	int (*probe)(void);
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-	int (*apic_id_registered)(void);
-
-	u32 int_delivery_mode;
-	u32 int_dest_mode;
-
-	const struct cpumask *(*target_cpus)(void);
-
-	int ESR_DISABLE;
-
-	int apic_destination_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
-	unsigned long (*check_apicid_present)(int apicid);
-
-	int no_balance_irq;
-	int no_ioapic_check;
-
-	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
-	void (*init_apic_ldr)(void);
-
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
-
-	void (*setup_apic_routing)(void);
-	int (*multi_timer_check)(int apic, int irq);
-	int (*apicid_to_node)(int logical_apicid);
-	int (*cpu_to_logical_apicid)(int cpu);
-	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
-	void (*setup_portio_remap)(void);
-	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
-	void (*enable_apic_mode)(void);
-#ifdef CONFIG_X86_32
-	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
-#else
-	unsigned int (*phys_pkg_id)(int index_msb);
-#endif
-
-	/*
-	 * When one of the next two hooks returns 1 the genapic
-	 * is switched to this. Essentially they are additional
-	 * probe functions:
-	 */
-	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
-			     char *productid);
-
-	unsigned int (*get_apic_id)(unsigned long x);
-	unsigned long (*set_apic_id)(unsigned int id);
-	unsigned long apic_id_mask;
-
-	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
-	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
-					       const struct cpumask *andmask);
-
-#ifdef CONFIG_SMP
-	/* ipi */
-	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
-	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
-					 int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-	void (*send_IPI_self)(int vector);
-#endif
-	/* wakeup_secondary_cpu */
-	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
-
-	int trampoline_phys_low;
-	int trampoline_phys_high;
-	void (*wait_for_init_deassert)(atomic_t *deassert);
-	void (*smp_callin_clear_local_apic)(void);
-	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*inquire_remote_apic)(int apicid);
-};
-
 #define APICFUNC(x) .x = x,
 
 /* More functions could be probably marked IPIFUNC and save some space
diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h
index 0a5f7122d9f..c70ca0d50eb 100644
--- a/arch/x86/include/asm/genapic_64.h
+++ b/arch/x86/include/asm/genapic_64.h
@@ -1,97 +1,6 @@
 #ifndef _ASM_X86_GENAPIC_64_H
 #define _ASM_X86_GENAPIC_64_H
 
-#include <linux/cpumask.h>
-
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch data struct.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-
-struct genapic {
-	char *name;
-
-	int (*probe)(void);
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-	int (*apic_id_registered)(void);
-
-	u32 int_delivery_mode;
-	u32 int_dest_mode;
-
-	const struct cpumask *(*target_cpus)(void);
-
-	int ESR_DISABLE;
-
-	int apic_destination_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
-	unsigned long (*check_apicid_present)(int apicid);
-
-	int no_balance_irq;
-	int no_ioapic_check;
-
-	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
-	void (*init_apic_ldr)(void);
-
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
-
-	void (*setup_apic_routing)(void);
-	int (*multi_timer_check)(int apic, int irq);
-	int (*apicid_to_node)(int logical_apicid);
-	int (*cpu_to_logical_apicid)(int cpu);
-	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
-	void (*setup_portio_remap)(void);
-	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
-	void (*enable_apic_mode)(void);
-#ifdef CONFIG_X86_32
-	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
-#else
-	unsigned int (*phys_pkg_id)(int index_msb);
-#endif
-
-	/*
-	 * When one of the next two hooks returns 1 the genapic
-	 * is switched to this. Essentially they are additional
-	 * probe functions:
-	 */
-	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
-			     char *productid);
-
-	unsigned int (*get_apic_id)(unsigned long x);
-	unsigned long (*set_apic_id)(unsigned int id);
-	unsigned long apic_id_mask;
-
-	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
-	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
-					       const struct cpumask *andmask);
-
-#ifdef CONFIG_SMP
-	/* ipi */
-	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
-	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
-					 int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-	void (*send_IPI_self)(int vector);
-#endif
-	/* wakeup_secondary_cpu */
-	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
-
-	int trampoline_phys_low;
-	int trampoline_phys_high;
-	void (*wait_for_init_deassert)(atomic_t *deassert);
-	void (*smp_callin_clear_local_apic)(void);
-	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*inquire_remote_apic)(int apicid);
-};
-
 extern struct genapic *genapic;
 
 extern struct genapic apic_flat;
-- 
cgit v1.2.3


From ced733ec0bfe9a8a5140a7aefdfe802598e4b8c0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 23:15:06 +0100
Subject: x86, genapic: finish unification

Unify remaining bits of genapic_32/64.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h    | 80 ++++++++++++++++++++++++++++++++++++++-
 arch/x86/include/asm/genapic_32.h | 65 -------------------------------
 arch/x86/include/asm/genapic_64.h | 19 ----------
 3 files changed, 78 insertions(+), 86 deletions(-)
 delete mode 100644 arch/x86/include/asm/genapic_32.h
 delete mode 100644 arch/x86/include/asm/genapic_64.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 3dea66a328e..7df1b48fa35 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -93,9 +93,85 @@ struct genapic {
 };
 
 #ifdef CONFIG_X86_32
-# include "genapic_32.h"
+
+#include <asm/mpspec.h>
+#include <asm/atomic.h>
+
+#define APICFUNC(x) .x = x,
+
+/* More functions could be probably marked IPIFUNC and save some space
+   in UP GENERICARCH kernels, but I don't have the nerve right now
+   to untangle this mess. -AK  */
+#ifdef CONFIG_SMP
+#define IPIFUNC(x) APICFUNC(x)
 #else
-# include "genapic_64.h"
+#define IPIFUNC(x)
 #endif
 
+#define APIC_INIT(aname, aprobe)			\
+{							\
+	.name = aname,					\
+	.probe = aprobe,				\
+	.int_delivery_mode = INT_DELIVERY_MODE,		\
+	.int_dest_mode = INT_DEST_MODE,			\
+	.no_balance_irq = NO_BALANCE_IRQ,		\
+	.ESR_DISABLE = esr_disable,			\
+	.apic_destination_logical = APIC_DEST_LOGICAL,	\
+	APICFUNC(apic_id_registered)			\
+	APICFUNC(target_cpus)				\
+	APICFUNC(check_apicid_used)			\
+	APICFUNC(check_apicid_present)			\
+	APICFUNC(init_apic_ldr)				\
+	APICFUNC(ioapic_phys_id_map)			\
+	APICFUNC(setup_apic_routing)			\
+	APICFUNC(multi_timer_check)			\
+	APICFUNC(apicid_to_node)			\
+	APICFUNC(cpu_to_logical_apicid)			\
+	APICFUNC(cpu_present_to_apicid)			\
+	APICFUNC(apicid_to_cpu_present)			\
+	APICFUNC(setup_portio_remap)			\
+	APICFUNC(check_phys_apicid_present)		\
+	APICFUNC(mps_oem_check)				\
+	APICFUNC(get_apic_id)				\
+	.apic_id_mask = APIC_ID_MASK,			\
+	APICFUNC(cpu_mask_to_apicid)			\
+	APICFUNC(cpu_mask_to_apicid_and)		\
+	APICFUNC(vector_allocation_domain)		\
+	APICFUNC(acpi_madt_oem_check)			\
+	IPIFUNC(send_IPI_mask)				\
+	IPIFUNC(send_IPI_allbutself)			\
+	IPIFUNC(send_IPI_all)				\
+	APICFUNC(enable_apic_mode)			\
+	APICFUNC(phys_pkg_id)				\
+	.trampoline_phys_low = TRAMPOLINE_PHYS_LOW,		\
+	.trampoline_phys_high = TRAMPOLINE_PHYS_HIGH,		\
+	APICFUNC(wait_for_init_deassert)		\
+	APICFUNC(smp_callin_clear_local_apic)		\
+	APICFUNC(store_NMI_vector)			\
+	APICFUNC(restore_NMI_vector)			\
+	APICFUNC(inquire_remote_apic)			\
+}
+
+extern struct genapic *genapic;
+extern void es7000_update_genapic_to_cluster(void);
+
+#else /* CONFIG_X86_64: */
+
+extern struct genapic *genapic;
+
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
+extern int acpi_madt_oem_check(char *, char *);
+
+extern void apic_send_IPI_self(int vector);
+
+extern struct genapic apic_x2apic_uv_x;
+DECLARE_PER_CPU(int, x2apic_extra_bits);
+
+extern void setup_apic_routing(void);
+
+#endif /* CONFIG_X86_64 */
+
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h
deleted file mode 100644
index a56785ed12a..00000000000
--- a/arch/x86/include/asm/genapic_32.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef _ASM_X86_GENAPIC_32_H
-#define _ASM_X86_GENAPIC_32_H
-
-#include <asm/mpspec.h>
-#include <asm/atomic.h>
-
-#define APICFUNC(x) .x = x,
-
-/* More functions could be probably marked IPIFUNC and save some space
-   in UP GENERICARCH kernels, but I don't have the nerve right now
-   to untangle this mess. -AK  */
-#ifdef CONFIG_SMP
-#define IPIFUNC(x) APICFUNC(x)
-#else
-#define IPIFUNC(x)
-#endif
-
-#define APIC_INIT(aname, aprobe)			\
-{							\
-	.name = aname,					\
-	.probe = aprobe,				\
-	.int_delivery_mode = INT_DELIVERY_MODE,		\
-	.int_dest_mode = INT_DEST_MODE,			\
-	.no_balance_irq = NO_BALANCE_IRQ,		\
-	.ESR_DISABLE = esr_disable,			\
-	.apic_destination_logical = APIC_DEST_LOGICAL,	\
-	APICFUNC(apic_id_registered)			\
-	APICFUNC(target_cpus)				\
-	APICFUNC(check_apicid_used)			\
-	APICFUNC(check_apicid_present)			\
-	APICFUNC(init_apic_ldr)				\
-	APICFUNC(ioapic_phys_id_map)			\
-	APICFUNC(setup_apic_routing)			\
-	APICFUNC(multi_timer_check)			\
-	APICFUNC(apicid_to_node)			\
-	APICFUNC(cpu_to_logical_apicid)			\
-	APICFUNC(cpu_present_to_apicid)			\
-	APICFUNC(apicid_to_cpu_present)			\
-	APICFUNC(setup_portio_remap)			\
-	APICFUNC(check_phys_apicid_present)		\
-	APICFUNC(mps_oem_check)				\
-	APICFUNC(get_apic_id)				\
-	.apic_id_mask = APIC_ID_MASK,			\
-	APICFUNC(cpu_mask_to_apicid)			\
-	APICFUNC(cpu_mask_to_apicid_and)		\
-	APICFUNC(vector_allocation_domain)		\
-	APICFUNC(acpi_madt_oem_check)			\
-	IPIFUNC(send_IPI_mask)				\
-	IPIFUNC(send_IPI_allbutself)			\
-	IPIFUNC(send_IPI_all)				\
-	APICFUNC(enable_apic_mode)			\
-	APICFUNC(phys_pkg_id)				\
-	.trampoline_phys_low = TRAMPOLINE_PHYS_LOW,		\
-	.trampoline_phys_high = TRAMPOLINE_PHYS_HIGH,		\
-	APICFUNC(wait_for_init_deassert)		\
-	APICFUNC(smp_callin_clear_local_apic)		\
-	APICFUNC(store_NMI_vector)			\
-	APICFUNC(restore_NMI_vector)			\
-	APICFUNC(inquire_remote_apic)			\
-}
-
-extern struct genapic *genapic;
-extern void es7000_update_genapic_to_cluster(void);
-
-#endif /* _ASM_X86_GENAPIC_32_H */
diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h
deleted file mode 100644
index c70ca0d50eb..00000000000
--- a/arch/x86/include/asm/genapic_64.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_X86_GENAPIC_64_H
-#define _ASM_X86_GENAPIC_64_H
-
-extern struct genapic *genapic;
-
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
-extern struct genapic apic_x2apic_cluster;
-extern struct genapic apic_x2apic_phys;
-extern int acpi_madt_oem_check(char *, char *);
-
-extern void apic_send_IPI_self(int vector);
-
-extern struct genapic apic_x2apic_uv_x;
-DECLARE_PER_CPU(int, x2apic_extra_bits);
-
-extern void setup_apic_routing(void);
-
-#endif /* _ASM_X86_GENAPIC_64_H */
-- 
cgit v1.2.3


From 505deeb1a228e5b0bf6ac5d0d78f4a4253a9efe9 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 23:23:22 +0100
Subject: x86, genapic: cleanups

Unify genapic.h some more.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 7df1b48fa35..19a5193e965 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -3,6 +3,9 @@
 
 #include <linux/cpumask.h>
 
+#include <asm/mpspec.h>
+#include <asm/atomic.h>
+
 /*
  * Copyright 2004 James Cleverdon, IBM.
  * Subject to the GNU Public License, v.2
@@ -13,7 +16,6 @@
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
  */
-
 struct genapic {
 	char *name;
 
@@ -85,6 +87,7 @@ struct genapic {
 
 	int trampoline_phys_low;
 	int trampoline_phys_high;
+
 	void (*wait_for_init_deassert)(atomic_t *deassert);
 	void (*smp_callin_clear_local_apic)(void);
 	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
@@ -92,10 +95,9 @@ struct genapic {
 	void (*inquire_remote_apic)(int apicid);
 };
 
-#ifdef CONFIG_X86_32
+extern struct genapic *genapic;
 
-#include <asm/mpspec.h>
-#include <asm/atomic.h>
+#ifdef CONFIG_X86_32
 
 #define APICFUNC(x) .x = x,
 
@@ -143,8 +145,8 @@ struct genapic {
 	IPIFUNC(send_IPI_all)				\
 	APICFUNC(enable_apic_mode)			\
 	APICFUNC(phys_pkg_id)				\
-	.trampoline_phys_low = TRAMPOLINE_PHYS_LOW,		\
-	.trampoline_phys_high = TRAMPOLINE_PHYS_HIGH,		\
+	.trampoline_phys_low = TRAMPOLINE_PHYS_LOW,	\
+	.trampoline_phys_high = TRAMPOLINE_PHYS_HIGH,	\
 	APICFUNC(wait_for_init_deassert)		\
 	APICFUNC(smp_callin_clear_local_apic)		\
 	APICFUNC(store_NMI_vector)			\
@@ -152,13 +154,10 @@ struct genapic {
 	APICFUNC(inquire_remote_apic)			\
 }
 
-extern struct genapic *genapic;
 extern void es7000_update_genapic_to_cluster(void);
 
 #else /* CONFIG_X86_64: */
 
-extern struct genapic *genapic;
-
 extern struct genapic apic_flat;
 extern struct genapic apic_physflat;
 extern struct genapic apic_x2apic_cluster;
-- 
cgit v1.2.3


From 6781d948cc05b02df915650f2eb49550a1631df9 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 23:54:23 +0100
Subject: x86, genapic: provide IPI callbacks unconditionally

64-bit x86 uses the IPI callbacks even on UP - so provide them
generally.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 19a5193e965..c27efde0523 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -73,7 +73,6 @@ struct genapic {
 	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
 					       const struct cpumask *andmask);
 
-#ifdef CONFIG_SMP
 	/* ipi */
 	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
 	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
@@ -81,7 +80,7 @@ struct genapic {
 	void (*send_IPI_allbutself)(int vector);
 	void (*send_IPI_all)(int vector);
 	void (*send_IPI_self)(int vector);
-#endif
+
 	/* wakeup_secondary_cpu */
 	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
 
-- 
cgit v1.2.3


From c8d46cf06dc2e3a8f57a350eb9f9b19fd7f2ffe5 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 00:14:11 +0100
Subject: x86: rename 'genapic' to 'apic'

Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h                   |  2 +-
 arch/x86/include/asm/mach-default/mach_apic.h    | 22 +++----
 arch/x86/include/asm/mach-default/mach_apicdef.h |  6 +-
 arch/x86/include/asm/mach-default/mach_ipi.h     |  8 +--
 arch/x86/include/asm/mach-generic/mach_apic.h    | 50 +++++++--------
 arch/x86/include/asm/mach-generic/mach_apicdef.h |  4 +-
 arch/x86/include/asm/mach-generic/mach_ipi.h     |  6 +-
 arch/x86/include/asm/mach-generic/mach_wakecpu.h | 14 ++---
 arch/x86/kernel/es7000_32.c                      |  6 +-
 arch/x86/kernel/genapic_64.c                     | 16 ++---
 arch/x86/kernel/io_apic.c                        | 80 ++++++++++++------------
 arch/x86/kernel/numaq_32.c                       |  2 +-
 arch/x86/kernel/setup.c                          |  2 +-
 arch/x86/mach-generic/es7000.c                   | 12 ++--
 arch/x86/mach-generic/probe.c                    | 24 +++----
 15 files changed, 127 insertions(+), 127 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index c27efde0523..3970da3245c 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -94,7 +94,7 @@ struct genapic {
 	void (*inquire_remote_apic)(int apicid);
 };
 
-extern struct genapic *genapic;
+extern struct genapic *apic;
 
 #ifdef CONFIG_X86_32
 
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index cc09cbbee27..2448b927b64 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -22,18 +22,18 @@ static inline const struct cpumask *target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#define TARGET_CPUS	  (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define cpu_mask_to_apicid_and (genapic->cpu_mask_to_apicid_and)
-#define phys_pkg_id	(genapic->phys_pkg_id)
-#define vector_allocation_domain    (genapic->vector_allocation_domain)
+#define INT_DELIVERY_MODE (apic->int_delivery_mode)
+#define INT_DEST_MODE (apic->int_dest_mode)
+#define TARGET_CPUS	  (apic->target_cpus())
+#define apic_id_registered (apic->apic_id_registered)
+#define init_apic_ldr (apic->init_apic_ldr)
+#define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
+#define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
+#define phys_pkg_id	(apic->phys_pkg_id)
+#define vector_allocation_domain    (apic->vector_allocation_domain)
 #define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
-#define send_IPI_self (genapic->send_IPI_self)
-#define wakeup_secondary_cpu (genapic->wakeup_cpu)
+#define send_IPI_self (apic->send_IPI_self)
+#define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void setup_apic_routing(void);
 #else
 #define INT_DELIVERY_MODE dest_LowestPrio
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
index 53179936d6c..b4dcc0971c7 100644
--- a/arch/x86/include/asm/mach-default/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-default/mach_apicdef.h
@@ -4,9 +4,9 @@
 #include <asm/apic.h>
 
 #ifdef CONFIG_X86_64
-#define	APIC_ID_MASK		(genapic->apic_id_mask)
-#define GET_APIC_ID(x)		(genapic->get_apic_id(x))
-#define	SET_APIC_ID(x)		(genapic->set_apic_id(x))
+#define	APIC_ID_MASK		(apic->apic_id_mask)
+#define GET_APIC_ID(x)		(apic->get_apic_id(x))
+#define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
 #define		APIC_ID_MASK		(0xF<<24)
 static inline unsigned get_apic_id(unsigned long x) 
diff --git a/arch/x86/include/asm/mach-default/mach_ipi.h b/arch/x86/include/asm/mach-default/mach_ipi.h
index 191312d155d..089399643df 100644
--- a/arch/x86/include/asm/mach-default/mach_ipi.h
+++ b/arch/x86/include/asm/mach-default/mach_ipi.h
@@ -12,8 +12,8 @@ extern int no_broadcast;
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define send_IPI_mask (genapic->send_IPI_mask)
-#define send_IPI_mask_allbutself (genapic->send_IPI_mask_allbutself)
+#define send_IPI_mask (apic->send_IPI_mask)
+#define send_IPI_mask_allbutself (apic->send_IPI_mask_allbutself)
 #else
 static inline void send_IPI_mask(const struct cpumask *mask, int vector)
 {
@@ -39,8 +39,8 @@ static inline void __local_send_IPI_all(int vector)
 }
 
 #ifdef CONFIG_X86_64
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
+#define send_IPI_allbutself (apic->send_IPI_allbutself)
+#define send_IPI_all (apic->send_IPI_all)
 #else
 static inline void send_IPI_allbutself(int vector)
 {
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 48553e958ad..59972d94ff1 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,32 +3,32 @@
 
 #include <asm/genapic.h>
 
-#define esr_disable (genapic->ESR_DISABLE)
-#define NO_BALANCE_IRQ (genapic->no_balance_irq)
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
+#define esr_disable (apic->ESR_DISABLE)
+#define NO_BALANCE_IRQ (apic->no_balance_irq)
+#define INT_DELIVERY_MODE (apic->int_delivery_mode)
+#define INT_DEST_MODE (apic->int_dest_mode)
 #undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL (genapic->apic_destination_logical)
-#define TARGET_CPUS	  (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
-#define setup_apic_routing (genapic->setup_apic_routing)
-#define multi_timer_check (genapic->multi_timer_check)
-#define apicid_to_node (genapic->apicid_to_node)
-#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
-#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
-#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
-#define setup_portio_remap (genapic->setup_portio_remap)
-#define check_apicid_present (genapic->check_apicid_present)
-#define check_phys_apicid_present (genapic->check_phys_apicid_present)
-#define check_apicid_used (genapic->check_apicid_used)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define cpu_mask_to_apicid_and (genapic->cpu_mask_to_apicid_and)
-#define vector_allocation_domain (genapic->vector_allocation_domain)
-#define enable_apic_mode (genapic->enable_apic_mode)
-#define phys_pkg_id (genapic->phys_pkg_id)
-#define wakeup_secondary_cpu (genapic->wakeup_cpu)
+#define APIC_DEST_LOGICAL (apic->apic_destination_logical)
+#define TARGET_CPUS	  (apic->target_cpus())
+#define apic_id_registered (apic->apic_id_registered)
+#define init_apic_ldr (apic->init_apic_ldr)
+#define ioapic_phys_id_map (apic->ioapic_phys_id_map)
+#define setup_apic_routing (apic->setup_apic_routing)
+#define multi_timer_check (apic->multi_timer_check)
+#define apicid_to_node (apic->apicid_to_node)
+#define cpu_to_logical_apicid (apic->cpu_to_logical_apicid) 
+#define cpu_present_to_apicid (apic->cpu_present_to_apicid)
+#define apicid_to_cpu_present (apic->apicid_to_cpu_present)
+#define setup_portio_remap (apic->setup_portio_remap)
+#define check_apicid_present (apic->check_apicid_present)
+#define check_phys_apicid_present (apic->check_phys_apicid_present)
+#define check_apicid_used (apic->check_apicid_used)
+#define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
+#define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
+#define vector_allocation_domain (apic->vector_allocation_domain)
+#define enable_apic_mode (apic->enable_apic_mode)
+#define phys_pkg_id (apic->phys_pkg_id)
+#define wakeup_secondary_cpu (apic->wakeup_cpu)
 
 extern void generic_bigsmp_probe(void);
 
diff --git a/arch/x86/include/asm/mach-generic/mach_apicdef.h b/arch/x86/include/asm/mach-generic/mach_apicdef.h
index 68041f3802f..acc9adddb34 100644
--- a/arch/x86/include/asm/mach-generic/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-generic/mach_apicdef.h
@@ -4,8 +4,8 @@
 #ifndef APIC_DEFINITION
 #include <asm/genapic.h>
 
-#define GET_APIC_ID (genapic->get_apic_id)
-#define APIC_ID_MASK (genapic->apic_id_mask)
+#define GET_APIC_ID (apic->get_apic_id)
+#define APIC_ID_MASK (apic->apic_id_mask)
 #endif
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_ipi.h b/arch/x86/include/asm/mach-generic/mach_ipi.h
index ffd637e3c3d..75e54bd6cbd 100644
--- a/arch/x86/include/asm/mach-generic/mach_ipi.h
+++ b/arch/x86/include/asm/mach-generic/mach_ipi.h
@@ -3,8 +3,8 @@
 
 #include <asm/genapic.h>
 
-#define send_IPI_mask (genapic->send_IPI_mask)
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
+#define send_IPI_mask (apic->send_IPI_mask)
+#define send_IPI_allbutself (apic->send_IPI_allbutself)
+#define send_IPI_all (apic->send_IPI_all)
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
index 1ab16b168c8..22006bbee61 100644
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -1,12 +1,12 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 #define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 
-#define TRAMPOLINE_PHYS_LOW (genapic->trampoline_phys_low)
-#define TRAMPOLINE_PHYS_HIGH (genapic->trampoline_phys_high)
-#define wait_for_init_deassert (genapic->wait_for_init_deassert)
-#define smp_callin_clear_local_apic (genapic->smp_callin_clear_local_apic)
-#define store_NMI_vector (genapic->store_NMI_vector)
-#define restore_NMI_vector (genapic->restore_NMI_vector)
-#define inquire_remote_apic (genapic->inquire_remote_apic)
+#define TRAMPOLINE_PHYS_LOW (apic->trampoline_phys_low)
+#define TRAMPOLINE_PHYS_HIGH (apic->trampoline_phys_high)
+#define wait_for_init_deassert (apic->wait_for_init_deassert)
+#define smp_callin_clear_local_apic (apic->smp_callin_clear_local_apic)
+#define store_NMI_vector (apic->store_NMI_vector)
+#define restore_NMI_vector (apic->restore_NMI_vector)
+#define inquire_remote_apic (apic->inquire_remote_apic)
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 53699c931ad..20a2a43c2a9 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -188,14 +188,14 @@ static void noop_wait_for_deassert(atomic_t *deassert_not_used)
 
 static int __init es7000_update_genapic(void)
 {
-	genapic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
+	apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
 
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
 	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) {
 		es7000_update_genapic_to_cluster();
-		genapic->wait_for_init_deassert = noop_wait_for_deassert;
-		genapic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
+		apic->wait_for_init_deassert = noop_wait_for_deassert;
+		apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
 	}
 
 	return 0;
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index e656c272115..2b986389a24 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -29,7 +29,7 @@ extern struct genapic apic_x2xpic_uv_x;
 extern struct genapic apic_x2apic_phys;
 extern struct genapic apic_x2apic_cluster;
 
-struct genapic __read_mostly *genapic = &apic_flat;
+struct genapic __read_mostly *apic = &apic_flat;
 
 static struct genapic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_UV
@@ -46,15 +46,15 @@ static struct genapic *apic_probe[] __initdata = {
  */
 void __init setup_apic_routing(void)
 {
-	if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) {
+	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
 		if (!intr_remapping_enabled)
-			genapic = &apic_flat;
+			apic = &apic_flat;
 	}
 
-	if (genapic == &apic_flat) {
+	if (apic == &apic_flat) {
 		if (max_physical_apicid >= 8)
-			genapic = &apic_physflat;
-		printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+			apic = &apic_physflat;
+		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 
 	if (x86_quirks->update_genapic)
@@ -74,9 +74,9 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 
 	for (i = 0; apic_probe[i]; ++i) {
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
-			genapic = apic_probe[i];
+			apic = apic_probe[i];
 			printk(KERN_INFO "Setting APIC routing to %s.\n",
-				genapic->name);
+				apic->name);
 			return 1;
 		}
 	}
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index bfb7d734062..7283234229f 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1486,7 +1486,7 @@ static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long t
 					      handle_edge_irq, "edge");
 }
 
-static int setup_ioapic_entry(int apic, int irq,
+static int setup_ioapic_entry(int apic_id, int irq,
 			      struct IO_APIC_route_entry *entry,
 			      unsigned int destination, int trigger,
 			      int polarity, int vector)
@@ -1498,18 +1498,18 @@ static int setup_ioapic_entry(int apic, int irq,
 
 #ifdef CONFIG_INTR_REMAP
 	if (intr_remapping_enabled) {
-		struct intel_iommu *iommu = map_ioapic_to_ir(apic);
+		struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
 		struct irte irte;
 		struct IR_IO_APIC_route_entry *ir_entry =
 			(struct IR_IO_APIC_route_entry *) entry;
 		int index;
 
 		if (!iommu)
-			panic("No mapping iommu for ioapic %d\n", apic);
+			panic("No mapping iommu for ioapic %d\n", apic_id);
 
 		index = alloc_irte(iommu, irq, 1);
 		if (index < 0)
-			panic("Failed to allocate IRTE for ioapic %d\n", apic);
+			panic("Failed to allocate IRTE for ioapic %d\n", apic_id);
 
 		memset(&irte, 0, sizeof(irte));
 
@@ -1547,7 +1547,7 @@ static int setup_ioapic_entry(int apic, int irq,
 	return 0;
 }
 
-static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_desc *desc,
+static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq_desc *desc,
 			      int trigger, int polarity)
 {
 	struct irq_cfg *cfg;
@@ -1567,14 +1567,14 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_de
 	apic_printk(APIC_VERBOSE,KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
 		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].apicid, pin, cfg->vector,
+		    apic_id, mp_ioapics[apic_id].apicid, pin, cfg->vector,
 		    irq, trigger, polarity);
 
 
-	if (setup_ioapic_entry(mp_ioapics[apic].apicid, irq, &entry,
+	if (setup_ioapic_entry(mp_ioapics[apic_id].apicid, irq, &entry,
 			       dest, trigger, polarity, cfg->vector)) {
 		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
-		       mp_ioapics[apic].apicid, pin);
+		       mp_ioapics[apic_id].apicid, pin);
 		__clear_irq_vector(irq, cfg);
 		return;
 	}
@@ -1583,12 +1583,12 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_de
 	if (irq < NR_IRQS_LEGACY)
 		disable_8259A_irq(irq);
 
-	ioapic_write_entry(apic, pin, entry);
+	ioapic_write_entry(apic_id, pin, entry);
 }
 
 static void __init setup_IO_APIC_irqs(void)
 {
-	int apic, pin, idx, irq;
+	int apic_id, pin, idx, irq;
 	int notcon = 0;
 	struct irq_desc *desc;
 	struct irq_cfg *cfg;
@@ -1596,19 +1596,19 @@ static void __init setup_IO_APIC_irqs(void)
 
 	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
+		for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
 
-			idx = find_irq_entry(apic, pin, mp_INT);
+			idx = find_irq_entry(apic_id, pin, mp_INT);
 			if (idx == -1) {
 				if (!notcon) {
 					notcon = 1;
 					apic_printk(APIC_VERBOSE,
 						KERN_DEBUG " %d-%d",
-						mp_ioapics[apic].apicid, pin);
+						mp_ioapics[apic_id].apicid, pin);
 				} else
 					apic_printk(APIC_VERBOSE, " %d-%d",
-						mp_ioapics[apic].apicid, pin);
+						mp_ioapics[apic_id].apicid, pin);
 				continue;
 			}
 			if (notcon) {
@@ -1617,9 +1617,9 @@ static void __init setup_IO_APIC_irqs(void)
 				notcon = 0;
 			}
 
-			irq = pin_2_irq(idx, apic, pin);
+			irq = pin_2_irq(idx, apic_id, pin);
 #ifdef CONFIG_X86_32
-			if (multi_timer_check(apic, irq))
+			if (multi_timer_check(apic_id, irq))
 				continue;
 #endif
 			desc = irq_to_desc_alloc_cpu(irq, cpu);
@@ -1628,9 +1628,9 @@ static void __init setup_IO_APIC_irqs(void)
 				continue;
 			}
 			cfg = desc->chip_data;
-			add_pin_to_irq_cpu(cfg, cpu, apic, pin);
+			add_pin_to_irq_cpu(cfg, cpu, apic_id, pin);
 
-			setup_IO_APIC_irq(apic, pin, irq, desc,
+			setup_IO_APIC_irq(apic_id, pin, irq, desc,
 					irq_trigger(idx), irq_polarity(idx));
 		}
 	}
@@ -1643,7 +1643,7 @@ static void __init setup_IO_APIC_irqs(void)
 /*
  * Set up the timer pin, possibly with the 8259A-master behind.
  */
-static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
+static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
 					int vector)
 {
 	struct IO_APIC_route_entry entry;
@@ -1676,7 +1676,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
 	/*
 	 * Add it to the IO-APIC irq-routing table:
 	 */
-	ioapic_write_entry(apic, pin, entry);
+	ioapic_write_entry(apic_id, pin, entry);
 }
 
 
@@ -2089,7 +2089,7 @@ static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;
 	physid_mask_t phys_id_present_map;
-	int apic;
+	int apic_id;
 	int i;
 	unsigned char old_id;
 	unsigned long flags;
@@ -2113,21 +2113,21 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	/*
 	 * Set the IOAPIC ID to the value stored in the MPC table.
 	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
+	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
 
 		/* Read the register 0 value */
 		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic, 0);
+		reg_00.raw = io_apic_read(apic_id, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
-		old_id = mp_ioapics[apic].apicid;
+		old_id = mp_ioapics[apic_id].apicid;
 
-		if (mp_ioapics[apic].apicid >= get_physical_broadcast()) {
+		if (mp_ioapics[apic_id].apicid >= get_physical_broadcast()) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic, mp_ioapics[apic].apicid);
+				apic_id, mp_ioapics[apic_id].apicid);
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				reg_00.bits.ID);
-			mp_ioapics[apic].apicid = reg_00.bits.ID;
+			mp_ioapics[apic_id].apicid = reg_00.bits.ID;
 		}
 
 		/*
@@ -2136,9 +2136,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
 		if (check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic].apicid)) {
+					mp_ioapics[apic_id].apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic, mp_ioapics[apic].apicid);
+				apic_id, mp_ioapics[apic_id].apicid);
 			for (i = 0; i < get_physical_broadcast(); i++)
 				if (!physid_isset(i, phys_id_present_map))
 					break;
@@ -2147,13 +2147,13 @@ static void __init setup_ioapic_ids_from_mpc(void)
 			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
 				i);
 			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic].apicid = i;
+			mp_ioapics[apic_id].apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic].apicid);
+			tmp = apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
-					mp_ioapics[apic].apicid);
+					mp_ioapics[apic_id].apicid);
 			physids_or(phys_id_present_map, phys_id_present_map, tmp);
 		}
 
@@ -2162,11 +2162,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * We need to adjust the IRQ routing table
 		 * if the ID changed.
 		 */
-		if (old_id != mp_ioapics[apic].apicid)
+		if (old_id != mp_ioapics[apic_id].apicid)
 			for (i = 0; i < mp_irq_entries; i++)
 				if (mp_irqs[i].dstapic == old_id)
 					mp_irqs[i].dstapic
-						= mp_ioapics[apic].apicid;
+						= mp_ioapics[apic_id].apicid;
 
 		/*
 		 * Read the right value from the MPC table and
@@ -2174,20 +2174,20 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 */
 		apic_printk(APIC_VERBOSE, KERN_INFO
 			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic].apicid);
+			mp_ioapics[apic_id].apicid);
 
-		reg_00.bits.ID = mp_ioapics[apic].apicid;
+		reg_00.bits.ID = mp_ioapics[apic_id].apicid;
 		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(apic, 0, reg_00.raw);
+		io_apic_write(apic_id, 0, reg_00.raw);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/*
 		 * Sanity check
 		 */
 		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic, 0);
+		reg_00.raw = io_apic_read(apic_id, 0);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic].apicid)
+		if (reg_00.bits.ID != mp_ioapics[apic_id].apicid)
 			printk("could not set ID!\n");
 		else
 			apic_printk(APIC_VERBOSE, " ok.\n");
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index f2191d4f271..3928280278f 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -236,7 +236,7 @@ static int __init numaq_setup_ioapic_ids(void)
 
 static int __init numaq_update_genapic(void)
 {
-	genapic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;
+	apic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f41c4486c27..a58e9f5e603 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -590,7 +590,7 @@ static int __init default_update_genapic(void)
 {
 #ifdef CONFIG_X86_SMP
 # if defined(CONFIG_X86_GENERICARCH) || defined(CONFIG_X86_64)
-	genapic->wakeup_cpu = wakeup_secondary_cpu_via_init;
+	apic->wakeup_cpu = wakeup_secondary_cpu_via_init;
 # endif
 #endif
 
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index c2ded144802..2f4f4a6e39b 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -20,14 +20,14 @@
 
 void __init es7000_update_genapic_to_cluster(void)
 {
-	genapic->target_cpus = target_cpus_cluster;
-	genapic->int_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
-	genapic->int_dest_mode = INT_DEST_MODE_CLUSTER;
-	genapic->no_balance_irq = NO_BALANCE_IRQ_CLUSTER;
+	apic->target_cpus = target_cpus_cluster;
+	apic->int_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
+	apic->int_dest_mode = INT_DEST_MODE_CLUSTER;
+	apic->no_balance_irq = NO_BALANCE_IRQ_CLUSTER;
 
-	genapic->init_apic_ldr = init_apic_ldr_cluster;
+	apic->init_apic_ldr = init_apic_ldr_cluster;
 
-	genapic->cpu_mask_to_apicid = cpu_mask_to_apicid_cluster;
+	apic->cpu_mask_to_apicid = cpu_mask_to_apicid_cluster;
 }
 
 static int probe_es7000(void)
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index 15a38daef1a..82bf0f520fb 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -23,7 +23,7 @@ extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;
 extern struct genapic apic_default;
 
-struct genapic *genapic = &apic_default;
+struct genapic *apic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_NUMAQ
@@ -52,7 +52,7 @@ static int __init parse_apic(char *arg)
 
 	for (i = 0; apic_probe[i]; i++) {
 		if (!strcmp(apic_probe[i]->name, arg)) {
-			genapic = apic_probe[i];
+			apic = apic_probe[i];
 			cmdline_apic = 1;
 			return 0;
 		}
@@ -76,13 +76,13 @@ void __init generic_bigsmp_probe(void)
 	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
 	 */
 
-	if (!cmdline_apic && genapic == &apic_default) {
+	if (!cmdline_apic && apic == &apic_default) {
 		if (apic_bigsmp.probe()) {
-			genapic = &apic_bigsmp;
+			apic = &apic_bigsmp;
 			if (x86_quirks->update_genapic)
 				x86_quirks->update_genapic();
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
-			       genapic->name);
+			       apic->name);
 		}
 	}
 #endif
@@ -94,7 +94,7 @@ void __init generic_apic_probe(void)
 		int i;
 		for (i = 0; apic_probe[i]; i++) {
 			if (apic_probe[i]->probe()) {
-				genapic = apic_probe[i];
+				apic = apic_probe[i];
 				break;
 			}
 		}
@@ -105,7 +105,7 @@ void __init generic_apic_probe(void)
 		if (x86_quirks->update_genapic)
 			x86_quirks->update_genapic();
 	}
-	printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
+	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
 }
 
 /* These functions can switch the APIC even after the initial ->probe() */
@@ -116,11 +116,11 @@ int __init mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 	for (i = 0; apic_probe[i]; ++i) {
 		if (apic_probe[i]->mps_oem_check(mpc, oem, productid)) {
 			if (!cmdline_apic) {
-				genapic = apic_probe[i];
+				apic = apic_probe[i];
 				if (x86_quirks->update_genapic)
 					x86_quirks->update_genapic();
 				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-				       genapic->name);
+				       apic->name);
 			}
 			return 1;
 		}
@@ -134,11 +134,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	for (i = 0; apic_probe[i]; ++i) {
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
 			if (!cmdline_apic) {
-				genapic = apic_probe[i];
+				apic = apic_probe[i];
 				if (x86_quirks->update_genapic)
 					x86_quirks->update_genapic();
 				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-				       genapic->name);
+				       apic->name);
 			}
 			return 1;
 		}
@@ -148,5 +148,5 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 
 int hard_smp_processor_id(void)
 {
-	return genapic->get_apic_id(*(unsigned long *)(APIC_BASE+APIC_ID));
+	return apic->get_apic_id(*(unsigned long *)(APIC_BASE+APIC_ID));
 }
-- 
cgit v1.2.3


From f2f05ee8b8d346d4edee766384a5fedafdd4f9f8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 02:37:01 +0100
Subject: x86: clean up genapic_flat

- reorder fields so that they appear in struct genapic field ordering

- add zero-initialized fields too so that it's apparent which functionality
  is default / missing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genapic_flat_64.c | 73 +++++++++++++++++++++++++++++----------
 1 file changed, 54 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 34185488e4f..f1bfdd3608a 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -175,25 +175,60 @@ static unsigned int phys_pkg_id(int index_msb)
 }
 
 struct genapic apic_flat =  {
-	.name = "flat",
-	.acpi_madt_oem_check = flat_acpi_madt_oem_check,
-	.int_delivery_mode = dest_LowestPrio,
-	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
-	.target_cpus = flat_target_cpus,
-	.vector_allocation_domain = flat_vector_allocation_domain,
-	.apic_id_registered = flat_apic_id_registered,
-	.init_apic_ldr = flat_init_apic_ldr,
-	.send_IPI_all = flat_send_IPI_all,
-	.send_IPI_allbutself = flat_send_IPI_allbutself,
-	.send_IPI_mask = flat_send_IPI_mask,
-	.send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
-	.send_IPI_self = apic_send_IPI_self,
-	.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
-	.phys_pkg_id = phys_pkg_id,
-	.get_apic_id = get_apic_id,
-	.set_apic_id = set_apic_id,
-	.apic_id_mask = (0xFFu<<24),
+	.name				= "flat",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
+	.apic_id_registered		= flat_apic_id_registered,
+
+	.int_delivery_mode		= dest_LowestPrio,
+	.int_dest_mode			= (APIC_DEST_LOGICAL != 0),
+
+	.target_cpus			= flat_target_cpus,
+	.ESR_DISABLE			= 0,
+	.apic_destination_logical	= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.no_balance_irq			= 0,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= flat_vector_allocation_domain,
+	.init_apic_ldr			= flat_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= NULL,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= NULL,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFu << 24,
+
+	.cpu_mask_to_apicid		= flat_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= flat_send_IPI_mask,
+	.send_IPI_mask_allbutself	= flat_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= flat_send_IPI_allbutself,
+	.send_IPI_all			= flat_send_IPI_all,
+	.send_IPI_self			= apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= 0,
+	.trampoline_phys_high		= 0,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
+	.inquire_remote_apic		= NULL,
 };
 
 /*
-- 
cgit v1.2.3


From 4c3e51e05a7eefead4033b187394458ff8626497 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 02:37:01 +0100
Subject: x86: clean up genapic_phys_flat

- reorder fields so that they appear in struct genapic field ordering

- add zero-initialized fields too so that it's apparent which functionality
  is default / missing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genapic_flat_64.c | 75 +++++++++++++++++++++++++++++----------
 1 file changed, 56 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index f1bfdd3608a..e9233374cef 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -320,23 +320,60 @@ physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 }
 
 struct genapic apic_physflat =  {
-	.name = "physical flat",
-	.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
-	.int_delivery_mode = dest_Fixed,
-	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
-	.target_cpus = physflat_target_cpus,
-	.vector_allocation_domain = physflat_vector_allocation_domain,
-	.apic_id_registered = flat_apic_id_registered,
-	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
-	.send_IPI_all = physflat_send_IPI_all,
-	.send_IPI_allbutself = physflat_send_IPI_allbutself,
-	.send_IPI_mask = physflat_send_IPI_mask,
-	.send_IPI_mask_allbutself = physflat_send_IPI_mask_allbutself,
-	.send_IPI_self = apic_send_IPI_self,
-	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and = physflat_cpu_mask_to_apicid_and,
-	.phys_pkg_id = phys_pkg_id,
-	.get_apic_id = get_apic_id,
-	.set_apic_id = set_apic_id,
-	.apic_id_mask = (0xFFu<<24),
+
+	.name				= "physical flat",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
+	.apic_id_registered		= flat_apic_id_registered,
+
+	.int_delivery_mode		= dest_Fixed,
+	.int_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+
+	.target_cpus			= physflat_target_cpus,
+	.ESR_DISABLE			= 0,
+	.apic_destination_logical	= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.no_balance_irq			= 0,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= physflat_vector_allocation_domain,
+	/* not needed, but shouldn't hurt: */
+	.init_apic_ldr			= flat_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= NULL,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= NULL,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFu<<24,
+
+	.cpu_mask_to_apicid		= physflat_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= physflat_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= physflat_send_IPI_mask,
+	.send_IPI_mask_allbutself	= physflat_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= physflat_send_IPI_allbutself,
+	.send_IPI_all			= physflat_send_IPI_all,
+	.send_IPI_self			= apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= 0,
+	.trampoline_phys_high		= 0,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
+	.inquire_remote_apic		= NULL,
 };
-- 
cgit v1.2.3


From c7967329911013a05920ef12832935c541bb8c9a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 02:37:01 +0100
Subject: x86: clean up apic_x2apic_uv_x

- reorder fields so that they appear in struct genapic field ordering

- add zero-initialized fields too so that it's apparent which functionality
  is default / missing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genx2apic_uv_x.c | 74 +++++++++++++++++++++++++++++-----------
 1 file changed, 55 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index bfe36249145..94f606f204a 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -237,25 +237,61 @@ static void uv_send_IPI_self(int vector)
 }
 
 struct genapic apic_x2apic_uv_x = {
-	.name = "UV large system",
-	.acpi_madt_oem_check = uv_acpi_madt_oem_check,
-	.int_delivery_mode = dest_Fixed,
-	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
-	.target_cpus = uv_target_cpus,
-	.vector_allocation_domain = uv_vector_allocation_domain,
-	.apic_id_registered = uv_apic_id_registered,
-	.init_apic_ldr = uv_init_apic_ldr,
-	.send_IPI_all = uv_send_IPI_all,
-	.send_IPI_allbutself = uv_send_IPI_allbutself,
-	.send_IPI_mask = uv_send_IPI_mask,
-	.send_IPI_mask_allbutself = uv_send_IPI_mask_allbutself,
-	.send_IPI_self = uv_send_IPI_self,
-	.cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and = uv_cpu_mask_to_apicid_and,
-	.phys_pkg_id = phys_pkg_id,
-	.get_apic_id = get_apic_id,
-	.set_apic_id = set_apic_id,
-	.apic_id_mask = (0xFFFFFFFFu),
+
+	.name				= "UV large system",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
+	.apic_id_registered		= uv_apic_id_registered,
+
+	.int_delivery_mode		= dest_Fixed,
+	.int_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+
+	.target_cpus			= uv_target_cpus,
+	.ESR_DISABLE			= 0,
+	.apic_destination_logical	= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.no_balance_irq			= 0,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= uv_vector_allocation_domain,
+	.init_apic_ldr			= uv_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= NULL,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= NULL,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFFFFFFFu,
+
+	.cpu_mask_to_apicid		= uv_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= uv_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= uv_send_IPI_mask,
+	.send_IPI_mask_allbutself	= uv_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= uv_send_IPI_allbutself,
+	.send_IPI_all			= uv_send_IPI_all,
+	.send_IPI_self			= uv_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= 0,
+	.trampoline_phys_high		= 0,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
+	.inquire_remote_apic		= NULL,
 };
 
 static __cpuinit void set_x2apic_extra_bits(int pnode)
-- 
cgit v1.2.3


From 05c155c235c757329ec89ad591516538ed8352c0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 02:37:01 +0100
Subject: x86: clean up apic_x2apic_phys

- reorder fields so that they appear in struct genapic field ordering

- add zero-initialized fields too so that it's apparent which functionality
  is default / missing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genx2apic_phys.c | 74 +++++++++++++++++++++++++++++-----------
 1 file changed, 55 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 21bcc0e098b..c98361fb7ee 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -172,23 +172,59 @@ static void init_x2apic_ldr(void)
 }
 
 struct genapic apic_x2apic_phys = {
-	.name = "physical x2apic",
-	.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
-	.int_delivery_mode = dest_Fixed,
-	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
-	.target_cpus = x2apic_target_cpus,
-	.vector_allocation_domain = x2apic_vector_allocation_domain,
-	.apic_id_registered = x2apic_apic_id_registered,
-	.init_apic_ldr = init_x2apic_ldr,
-	.send_IPI_all = x2apic_send_IPI_all,
-	.send_IPI_allbutself = x2apic_send_IPI_allbutself,
-	.send_IPI_mask = x2apic_send_IPI_mask,
-	.send_IPI_mask_allbutself = x2apic_send_IPI_mask_allbutself,
-	.send_IPI_self = x2apic_send_IPI_self,
-	.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and = x2apic_cpu_mask_to_apicid_and,
-	.phys_pkg_id = phys_pkg_id,
-	.get_apic_id = get_apic_id,
-	.set_apic_id = set_apic_id,
-	.apic_id_mask = (0xFFFFFFFFu),
+
+	.name				= "physical x2apic",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
+	.apic_id_registered		= x2apic_apic_id_registered,
+
+	.int_delivery_mode		= dest_Fixed,
+	.int_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+
+	.target_cpus			= x2apic_target_cpus,
+	.ESR_DISABLE			= 0,
+	.apic_destination_logical	= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.no_balance_irq			= 0,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= x2apic_vector_allocation_domain,
+	.init_apic_ldr			= init_x2apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= NULL,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= NULL,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFFFFFFFu,
+
+	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= x2apic_send_IPI_mask,
+	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
+	.send_IPI_all			= x2apic_send_IPI_all,
+	.send_IPI_self			= x2apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= 0,
+	.trampoline_phys_high		= 0,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
+	.inquire_remote_apic		= NULL,
 };
-- 
cgit v1.2.3


From 504a3c3ad45d200a6ac8be5aa019c8fa05e26dc8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 02:37:01 +0100
Subject: x86: clean up apic_x2apic_cluster

- reorder fields so that they appear in struct genapic field ordering

- add zero-initialized fields too so that it's apparent which functionality
  is default / missing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genx2apic_cluster.c | 74 +++++++++++++++++++++++++++----------
 1 file changed, 55 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 6ce497cc372..fc855e503ac 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -176,23 +176,59 @@ static void init_x2apic_ldr(void)
 }
 
 struct genapic apic_x2apic_cluster = {
-	.name = "cluster x2apic",
-	.acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
-	.int_delivery_mode = dest_LowestPrio,
-	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
-	.target_cpus = x2apic_target_cpus,
-	.vector_allocation_domain = x2apic_vector_allocation_domain,
-	.apic_id_registered = x2apic_apic_id_registered,
-	.init_apic_ldr = init_x2apic_ldr,
-	.send_IPI_all = x2apic_send_IPI_all,
-	.send_IPI_allbutself = x2apic_send_IPI_allbutself,
-	.send_IPI_mask = x2apic_send_IPI_mask,
-	.send_IPI_mask_allbutself = x2apic_send_IPI_mask_allbutself,
-	.send_IPI_self = x2apic_send_IPI_self,
-	.cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and = x2apic_cpu_mask_to_apicid_and,
-	.phys_pkg_id = phys_pkg_id,
-	.get_apic_id = get_apic_id,
-	.set_apic_id = set_apic_id,
-	.apic_id_mask = (0xFFFFFFFFu),
+
+	.name				= "cluster x2apic",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
+	.apic_id_registered		= x2apic_apic_id_registered,
+
+	.int_delivery_mode		= dest_LowestPrio,
+	.int_dest_mode			= (APIC_DEST_LOGICAL != 0),
+
+	.target_cpus			= x2apic_target_cpus,
+	.ESR_DISABLE			= 0,
+	.apic_destination_logical	= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.no_balance_irq			= 0,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= x2apic_vector_allocation_domain,
+	.init_apic_ldr			= init_x2apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= NULL,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= NULL,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFFFFFFFu,
+
+	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= x2apic_send_IPI_mask,
+	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
+	.send_IPI_all			= x2apic_send_IPI_all,
+	.send_IPI_self			= x2apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= 0,
+	.trampoline_phys_high		= 0,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
+	.inquire_remote_apic		= NULL,
 };
-- 
cgit v1.2.3


From 0a7e8c64142b2ae5aacdc509ed112b8e362ac8a4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:32:03 +0100
Subject: x86, genapic: cleanup 32-bit apic_default template

Clean up the APIC driver template:

 - order fields properly
 - use the macro names explicitly (so that they can be renamed later)
 - fill in NULL entries as well

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mach-generic/default.c | 58 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index e63a4a76d8c..d5fec764fb4 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -24,4 +24,60 @@ static int probe_default(void)
 	return 1;
 }
 
-struct genapic apic_default = APIC_INIT("default", probe_default);
+struct genapic apic_default = {
+
+	.name				= "default",
+	.probe				= probe_default,
+	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.apic_id_registered		= apic_id_registered,
+
+	.int_delivery_mode		= INT_DELIVERY_MODE,
+	.int_dest_mode			= INT_DEST_MODE,
+
+	.target_cpus			= target_cpus,
+	.ESR_DISABLE			= esr_disable,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.check_apicid_used		= check_apicid_used,
+	.check_apicid_present		= check_apicid_present,
+
+	.no_balance_irq			= NO_BALANCE_IRQ,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= vector_allocation_domain,
+	.init_apic_ldr			= init_apic_ldr,
+
+	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.setup_apic_routing		= setup_apic_routing,
+	.multi_timer_check		= multi_timer_check,
+	.apicid_to_node			= apicid_to_node,
+	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.setup_portio_remap		= setup_portio_remap,
+	.check_phys_apicid_present	= check_phys_apicid_present,
+	.enable_apic_mode		= enable_apic_mode,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= mps_oem_check,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= APIC_ID_MASK,
+
+	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= send_IPI_allbutself,
+	.send_IPI_all			= send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= wait_for_init_deassert,
+	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.store_NMI_vector		= store_NMI_vector,
+	.restore_NMI_vector		= restore_NMI_vector,
+	.inquire_remote_apic		= inquire_remote_apic,
+};
-- 
cgit v1.2.3


From d26b6d6660d704ffa59f22ad57c9103e3fba289f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:32:03 +0100
Subject: x86, genapic: cleanup 32-bit apic_bigsmp template

Clean up the APIC driver template:

 - order fields properly
 - use the macro names explicitly (so that they can be renamed later)
 - fill in NULL entries as well

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mach-generic/bigsmp.c | 58 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index bc4c7840b2a..13e82bc4dae 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -57,4 +57,60 @@ static int probe_bigsmp(void)
 	return dmi_bigsmp;
 }
 
-struct genapic apic_bigsmp = APIC_INIT("bigsmp", probe_bigsmp);
+struct genapic apic_bigsmp = {
+
+	.name				= "bigsmp",
+	.probe				= probe_bigsmp,
+	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.apic_id_registered		= apic_id_registered,
+
+	.int_delivery_mode		= INT_DELIVERY_MODE,
+	.int_dest_mode			= INT_DEST_MODE,
+
+	.target_cpus			= target_cpus,
+	.ESR_DISABLE			= esr_disable,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.check_apicid_used		= check_apicid_used,
+	.check_apicid_present		= check_apicid_present,
+
+	.no_balance_irq			= NO_BALANCE_IRQ,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= vector_allocation_domain,
+	.init_apic_ldr			= init_apic_ldr,
+
+	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.setup_apic_routing		= setup_apic_routing,
+	.multi_timer_check		= multi_timer_check,
+	.apicid_to_node			= apicid_to_node,
+	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.setup_portio_remap		= setup_portio_remap,
+	.check_phys_apicid_present	= check_phys_apicid_present,
+	.enable_apic_mode		= enable_apic_mode,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= mps_oem_check,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= APIC_ID_MASK,
+
+	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= send_IPI_allbutself,
+	.send_IPI_all			= send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= wait_for_init_deassert,
+	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.store_NMI_vector		= store_NMI_vector,
+	.restore_NMI_vector		= restore_NMI_vector,
+	.inquire_remote_apic		= inquire_remote_apic,
+};
-- 
cgit v1.2.3


From fea3437adf778cfe69b7f8cff0afb8060d84b647 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:32:03 +0100
Subject: x86, genapic: cleanup 32-bit apic_numaq template

Clean up the APIC driver template:

 - order fields properly
 - use the macro names explicitly (so that they can be renamed later)
 - fill in NULL entries as well

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mach-generic/numaq.c | 58 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 3679e225564..fa486ca49c0 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -50,4 +50,60 @@ static void vector_allocation_domain(int cpu, cpumask_t *retmask)
 	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
 }
 
-struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
+struct genapic apic_numaq = {
+
+	.name				= "NUMAQ",
+	.probe				= probe_numaq,
+	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.apic_id_registered		= apic_id_registered,
+
+	.int_delivery_mode		= INT_DELIVERY_MODE,
+	.int_dest_mode			= INT_DEST_MODE,
+
+	.target_cpus			= target_cpus,
+	.ESR_DISABLE			= esr_disable,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.check_apicid_used		= check_apicid_used,
+	.check_apicid_present		= check_apicid_present,
+
+	.no_balance_irq			= NO_BALANCE_IRQ,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= vector_allocation_domain,
+	.init_apic_ldr			= init_apic_ldr,
+
+	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.setup_apic_routing		= setup_apic_routing,
+	.multi_timer_check		= multi_timer_check,
+	.apicid_to_node			= apicid_to_node,
+	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.setup_portio_remap		= setup_portio_remap,
+	.check_phys_apicid_present	= check_phys_apicid_present,
+	.enable_apic_mode		= enable_apic_mode,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= mps_oem_check,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= APIC_ID_MASK,
+
+	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= send_IPI_allbutself,
+	.send_IPI_all			= send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= wait_for_init_deassert,
+	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.store_NMI_vector		= store_NMI_vector,
+	.restore_NMI_vector		= restore_NMI_vector,
+	.inquire_remote_apic		= inquire_remote_apic,
+};
-- 
cgit v1.2.3


From fed53ebf3c4e233e085c453a27ae287ccbf149fb Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:32:03 +0100
Subject: x86, genapic: cleanup 32-bit apic_es7000 template

Clean up the APIC driver template:

 - order fields properly
 - use the macro names explicitly (so that they can be renamed later)
 - fill in NULL entries as well

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mach-generic/es7000.c | 58 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 2f4f4a6e39b..4a404ea5f92 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -100,4 +100,60 @@ static void vector_allocation_domain(int cpu, cpumask_t *retmask)
 	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
 }
 
-struct genapic __initdata_refok apic_es7000 = APIC_INIT("es7000", probe_es7000);
+struct genapic apic_es7000 = {
+
+	.name				= "es7000",
+	.probe				= probe_es7000,
+	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.apic_id_registered		= apic_id_registered,
+
+	.int_delivery_mode		= INT_DELIVERY_MODE,
+	.int_dest_mode			= INT_DEST_MODE,
+
+	.target_cpus			= target_cpus,
+	.ESR_DISABLE			= esr_disable,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.check_apicid_used		= check_apicid_used,
+	.check_apicid_present		= check_apicid_present,
+
+	.no_balance_irq			= NO_BALANCE_IRQ,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= vector_allocation_domain,
+	.init_apic_ldr			= init_apic_ldr,
+
+	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.setup_apic_routing		= setup_apic_routing,
+	.multi_timer_check		= multi_timer_check,
+	.apicid_to_node			= apicid_to_node,
+	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.setup_portio_remap		= setup_portio_remap,
+	.check_phys_apicid_present	= check_phys_apicid_present,
+	.enable_apic_mode		= enable_apic_mode,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= mps_oem_check,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= APIC_ID_MASK,
+
+	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= send_IPI_allbutself,
+	.send_IPI_all			= send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= wait_for_init_deassert,
+	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.store_NMI_vector		= store_NMI_vector,
+	.restore_NMI_vector		= restore_NMI_vector,
+	.inquire_remote_apic		= inquire_remote_apic,
+};
-- 
cgit v1.2.3


From 491a50c4fbcf6cc39a702a16a2dfaf42f0eb8058 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:32:03 +0100
Subject: x86, genapic: cleanup 32-bit apic_summit template

Clean up the APIC driver template:

 - order fields properly
 - use the macro names explicitly (so that they can be renamed later)
 - fill in NULL entries as well

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mach-generic/summit.c | 58 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 2821ffc188b..479c1d40977 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -37,4 +37,60 @@ static void vector_allocation_domain(int cpu, cpumask_t *retmask)
 	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
 }
 
-struct genapic apic_summit = APIC_INIT("summit", probe_summit);
+struct genapic apic_summit = {
+
+	.name				= "summit",
+	.probe				= probe_summit,
+	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.apic_id_registered		= apic_id_registered,
+
+	.int_delivery_mode		= INT_DELIVERY_MODE,
+	.int_dest_mode			= INT_DEST_MODE,
+
+	.target_cpus			= target_cpus,
+	.ESR_DISABLE			= esr_disable,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.check_apicid_used		= check_apicid_used,
+	.check_apicid_present		= check_apicid_present,
+
+	.no_balance_irq			= NO_BALANCE_IRQ,
+	.no_ioapic_check		= 0,
+
+	.vector_allocation_domain	= vector_allocation_domain,
+	.init_apic_ldr			= init_apic_ldr,
+
+	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.setup_apic_routing		= setup_apic_routing,
+	.multi_timer_check		= multi_timer_check,
+	.apicid_to_node			= apicid_to_node,
+	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.setup_portio_remap		= setup_portio_remap,
+	.check_phys_apicid_present	= check_phys_apicid_present,
+	.enable_apic_mode		= enable_apic_mode,
+	.phys_pkg_id			= phys_pkg_id,
+	.mps_oem_check			= mps_oem_check,
+
+	.get_apic_id			= get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= APIC_ID_MASK,
+
+	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= send_IPI_allbutself,
+	.send_IPI_all			= send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= wait_for_init_deassert,
+	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.store_NMI_vector		= store_NMI_vector,
+	.restore_NMI_vector		= restore_NMI_vector,
+	.inquire_remote_apic		= inquire_remote_apic,
+};
-- 
cgit v1.2.3


From 9a6801da55e4a4492e8f666ac272efe8186682c8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:18:13 +0100
Subject: x86: remove APIC_INIT / APICFUNC / IPIFUNC

The APIC_INIT() / APICFUNC / IPIFUNC macros were ugly and obfuscated
the true identity of various APIC driver methods.

Now that they are not used anymore, remove them.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h | 63 ++----------------------------------------
 1 file changed, 2 insertions(+), 61 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 3970da3245c..26c5e824a71 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -97,66 +97,8 @@ struct genapic {
 extern struct genapic *apic;
 
 #ifdef CONFIG_X86_32
-
-#define APICFUNC(x) .x = x,
-
-/* More functions could be probably marked IPIFUNC and save some space
-   in UP GENERICARCH kernels, but I don't have the nerve right now
-   to untangle this mess. -AK  */
-#ifdef CONFIG_SMP
-#define IPIFUNC(x) APICFUNC(x)
-#else
-#define IPIFUNC(x)
-#endif
-
-#define APIC_INIT(aname, aprobe)			\
-{							\
-	.name = aname,					\
-	.probe = aprobe,				\
-	.int_delivery_mode = INT_DELIVERY_MODE,		\
-	.int_dest_mode = INT_DEST_MODE,			\
-	.no_balance_irq = NO_BALANCE_IRQ,		\
-	.ESR_DISABLE = esr_disable,			\
-	.apic_destination_logical = APIC_DEST_LOGICAL,	\
-	APICFUNC(apic_id_registered)			\
-	APICFUNC(target_cpus)				\
-	APICFUNC(check_apicid_used)			\
-	APICFUNC(check_apicid_present)			\
-	APICFUNC(init_apic_ldr)				\
-	APICFUNC(ioapic_phys_id_map)			\
-	APICFUNC(setup_apic_routing)			\
-	APICFUNC(multi_timer_check)			\
-	APICFUNC(apicid_to_node)			\
-	APICFUNC(cpu_to_logical_apicid)			\
-	APICFUNC(cpu_present_to_apicid)			\
-	APICFUNC(apicid_to_cpu_present)			\
-	APICFUNC(setup_portio_remap)			\
-	APICFUNC(check_phys_apicid_present)		\
-	APICFUNC(mps_oem_check)				\
-	APICFUNC(get_apic_id)				\
-	.apic_id_mask = APIC_ID_MASK,			\
-	APICFUNC(cpu_mask_to_apicid)			\
-	APICFUNC(cpu_mask_to_apicid_and)		\
-	APICFUNC(vector_allocation_domain)		\
-	APICFUNC(acpi_madt_oem_check)			\
-	IPIFUNC(send_IPI_mask)				\
-	IPIFUNC(send_IPI_allbutself)			\
-	IPIFUNC(send_IPI_all)				\
-	APICFUNC(enable_apic_mode)			\
-	APICFUNC(phys_pkg_id)				\
-	.trampoline_phys_low = TRAMPOLINE_PHYS_LOW,	\
-	.trampoline_phys_high = TRAMPOLINE_PHYS_HIGH,	\
-	APICFUNC(wait_for_init_deassert)		\
-	APICFUNC(smp_callin_clear_local_apic)		\
-	APICFUNC(store_NMI_vector)			\
-	APICFUNC(restore_NMI_vector)			\
-	APICFUNC(inquire_remote_apic)			\
-}
-
 extern void es7000_update_genapic_to_cluster(void);
-
-#else /* CONFIG_X86_64: */
-
+#else
 extern struct genapic apic_flat;
 extern struct genapic apic_physflat;
 extern struct genapic apic_x2apic_cluster;
@@ -169,7 +111,6 @@ extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
 extern void setup_apic_routing(void);
-
-#endif /* CONFIG_X86_64 */
+#endif
 
 #endif /* _ASM_X86_GENAPIC_64_H */
-- 
cgit v1.2.3


From 306db03b0d71bf9c94155c0c4771a79fc70b4b27 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:43:47 +0100
Subject: x86: clean up apic->acpi_madt_oem_check methods

Impact: refactor code

x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.

Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.

Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/mpparse.h            |  2 +-
 arch/x86/include/asm/genapic.h                   |  2 +-
 arch/x86/include/asm/mach-default/mach_mpparse.h |  2 +-
 arch/x86/include/asm/mach-generic/mach_mpparse.h |  2 +-
 arch/x86/include/asm/summit/mpparse.h            |  2 +-
 arch/x86/kernel/acpi/boot.c                      |  3 ++-
 arch/x86/kernel/genapic_64.c                     |  2 +-
 arch/x86/mach-generic/bigsmp.c                   |  2 +-
 arch/x86/mach-generic/default.c                  |  2 +-
 arch/x86/mach-generic/es7000.c                   |  6 +++---
 arch/x86/mach-generic/numaq.c                    |  8 +-------
 arch/x86/mach-generic/probe.c                    | 24 ++++++++++++++----------
 arch/x86/mach-generic/summit.c                   |  2 +-
 13 files changed, 29 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/mpparse.h b/arch/x86/include/asm/es7000/mpparse.h
index c1629b090ec..30692c4ae85 100644
--- a/arch/x86/include/asm/es7000/mpparse.h
+++ b/arch/x86/include/asm/es7000/mpparse.h
@@ -9,7 +9,7 @@ extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
 extern void setup_unisys(void);
 
 #ifndef CONFIG_X86_GENERICARCH
-extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+extern int default_acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 extern int mps_oem_check(struct mpc_table *mpc, char *oem, char *productid);
 #endif
 
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 26c5e824a71..108abdf6953 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -103,7 +103,7 @@ extern struct genapic apic_flat;
 extern struct genapic apic_physflat;
 extern struct genapic apic_x2apic_cluster;
 extern struct genapic apic_x2apic_phys;
-extern int acpi_madt_oem_check(char *, char *);
+extern int default_acpi_madt_oem_check(char *, char *);
 
 extern void apic_send_IPI_self(int vector);
 
diff --git a/arch/x86/include/asm/mach-default/mach_mpparse.h b/arch/x86/include/asm/mach-default/mach_mpparse.h
index c70a263d68c..8fa01770ba6 100644
--- a/arch/x86/include/asm/mach-default/mach_mpparse.h
+++ b/arch/x86/include/asm/mach-default/mach_mpparse.h
@@ -8,7 +8,7 @@ mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 }
 
 /* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static inline int default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 0;
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_mpparse.h b/arch/x86/include/asm/mach-generic/mach_mpparse.h
index 9444ab8dca9..f497d96c76b 100644
--- a/arch/x86/include/asm/mach-generic/mach_mpparse.h
+++ b/arch/x86/include/asm/mach-generic/mach_mpparse.h
@@ -4,6 +4,6 @@
 
 extern int mps_oem_check(struct mpc_table *, char *, char *);
 
-extern int acpi_madt_oem_check(char *, char *);
+extern int default_acpi_madt_oem_check(char *, char *);
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/summit/mpparse.h b/arch/x86/include/asm/summit/mpparse.h
index 380e86c0236..555ed8238e9 100644
--- a/arch/x86/include/asm/summit/mpparse.h
+++ b/arch/x86/include/asm/summit/mpparse.h
@@ -27,7 +27,7 @@ static inline int mps_oem_check(struct mpc_table *mpc, char *oem,
 }
 
 /* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strncmp(oem_id, "IBM", 3) &&
 	    (!strncmp(oem_table_id, "SERVIGIL", 8)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 4cb5964f149..314fe0dddef 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -239,7 +239,8 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 		       madt->address);
 	}
 
-	acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+	default_acpi_madt_oem_check(madt->header.oem_id,
+				    madt->header.oem_table_id);
 
 	return 0;
 }
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 2b986389a24..060945b8eec 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -68,7 +68,7 @@ void apic_send_IPI_self(int vector)
 	__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
 }
 
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	int i;
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 13e82bc4dae..22c3608b80d 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -61,7 +61,7 @@ struct genapic apic_bigsmp = {
 
 	.name				= "bigsmp",
 	.probe				= probe_bigsmp,
-	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index d5fec764fb4..cfec3494a96 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -28,7 +28,7 @@ struct genapic apic_default = {
 
 	.name				= "default",
 	.probe				= probe_default,
-	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 4a404ea5f92..23fe6f1c969 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -57,7 +57,7 @@ mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 
 #ifdef CONFIG_ACPI
 /* Hook from generic ACPI tables.c */
-static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	unsigned long oem_addr = 0;
 	int check_dsdt;
@@ -81,7 +81,7 @@ static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return ret;
 }
 #else
-static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 0;
 }
@@ -104,7 +104,7 @@ struct genapic apic_es7000 = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
-	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
 	.apic_id_registered		= apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index fa486ca49c0..9691b4e1654 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -31,12 +31,6 @@ static int probe_numaq(void)
 	return found_numaq;
 }
 
-/* Hook from generic ACPI tables.c */
-static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-
 static void vector_allocation_domain(int cpu, cpumask_t *retmask)
 {
 	/* Careful. Some cpus do not strictly honor the set of cpus
@@ -54,7 +48,7 @@ struct genapic apic_numaq = {
 
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
-	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index 82bf0f520fb..a21e2b1a701 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -128,20 +128,24 @@ int __init mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 	return 0;
 }
 
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	int i;
+
 	for (i = 0; apic_probe[i]; ++i) {
-		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
-			if (!cmdline_apic) {
-				apic = apic_probe[i];
-				if (x86_quirks->update_genapic)
-					x86_quirks->update_genapic();
-				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-				       apic->name);
-			}
-			return 1;
+		if (!apic_probe[i]->acpi_madt_oem_check)
+			continue;
+		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+			continue;
+
+		if (!cmdline_apic) {
+			apic = apic_probe[i];
+			if (x86_quirks->update_genapic)
+				x86_quirks->update_genapic();
+			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+			       apic->name);
 		}
+		return 1;
 	}
 	return 0;
 }
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 479c1d40977..0eea9fbb2a5 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -41,7 +41,7 @@ struct genapic apic_summit = {
 
 	.name				= "summit",
 	.probe				= probe_summit,
-	.acpi_madt_oem_check		= acpi_madt_oem_check,
+	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
 	.apic_id_registered		= apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
-- 
cgit v1.2.3


From 7ed248daa56156f2fd7175f90b62fc6397b0c7b7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 03:43:47 +0100
Subject: x86: clean up apic->apic_id_registered() methods

Impact: cleanup

x86 subarchitectures each defined a "apic_id_registered()" method,
which could be an inline function depending on which subarch we build
for, and which was also the name of a genapic field.

Untangle this namespace spaghetti by giving each of the instances
a separate name.

Also remove wrapper macro obfuscation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 4 ++--
 arch/x86/include/asm/es7000/apic.h            | 4 ++--
 arch/x86/include/asm/mach-default/mach_apic.h | 3 +--
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 2 +-
 arch/x86/kernel/apic.c                        | 2 +-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 12 files changed, 13 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index d8dd9f53791..42c56df3ff3 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -4,9 +4,9 @@
 #define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
 #define esr_disable (1)
 
-static inline int apic_id_registered(void)
+static inline int bigsmp_apic_id_registered(void)
 {
-	return (1);
+	return 1;
 }
 
 static inline const cpumask_t *target_cpus(void)
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index c58b9cc7446..a1819b510de 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -6,9 +6,9 @@
 #define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
 #define esr_disable (1)
 
-static inline int apic_id_registered(void)
+static inline int es7000_apic_id_registered(void)
 {
-	        return (1);
+	        return 1;
 }
 
 static inline const cpumask_t *target_cpus_cluster(void)
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 2448b927b64..6a454fa0b43 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -25,7 +25,6 @@ static inline const struct cpumask *target_cpus(void)
 #define INT_DELIVERY_MODE (apic->int_delivery_mode)
 #define INT_DEST_MODE (apic->int_dest_mode)
 #define TARGET_CPUS	  (apic->target_cpus())
-#define apic_id_registered (apic->apic_id_registered)
 #define init_apic_ldr (apic->init_apic_ldr)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
@@ -57,7 +56,7 @@ static inline void init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline int apic_id_registered(void)
+static inline int default_apic_id_registered(void)
 {
 	return physid_isset(read_apic_id(), phys_cpu_present_map);
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 59972d94ff1..cc6e9d70f06 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -10,7 +10,6 @@
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL (apic->apic_destination_logical)
 #define TARGET_CPUS	  (apic->target_cpus())
-#define apic_id_registered (apic->apic_id_registered)
 #define init_apic_ldr (apic->init_apic_ldr)
 #define ioapic_phys_id_map (apic->ioapic_phys_id_map)
 #define setup_apic_routing (apic->setup_apic_routing)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index bf37bc49bd8..59b62b19d02 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -28,7 +28,7 @@ static inline unsigned long check_apicid_present(int bit)
 }
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
-static inline int apic_id_registered(void)
+static inline int numaq_apic_id_registered(void)
 {
 	return 1;
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 93d2c8667cf..a36ef6e4b1f 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -74,7 +74,7 @@ static inline int multi_timer_check(int apic, int irq)
 	return 0;
 }
 
-static inline int apic_id_registered(void)
+static inline int summit_apic_id_registered(void)
 {
 	return 1;
 }
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index c6f15647eba..b6740de18fb 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1171,7 +1171,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Double-check whether this APIC is really registered.
 	 * This is meaningless in clustered apic mode, so we skip it.
 	 */
-	if (!apic_id_registered())
+	if (!apic->apic_id_registered())
 		BUG();
 
 	/*
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 22c3608b80d..17abf5c6242 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -62,7 +62,7 @@ struct genapic apic_bigsmp = {
 	.name				= "bigsmp",
 	.probe				= probe_bigsmp,
 	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= apic_id_registered,
+	.apic_id_registered		= bigsmp_apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
 	.int_dest_mode			= INT_DEST_MODE,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index cfec3494a96..1f30559e9d8 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -29,7 +29,7 @@ struct genapic apic_default = {
 	.name				= "default",
 	.probe				= probe_default,
 	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= apic_id_registered,
+	.apic_id_registered		= default_apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
 	.int_dest_mode			= INT_DEST_MODE,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 23fe6f1c969..d68ca0bce67 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -105,7 +105,7 @@ struct genapic apic_es7000 = {
 	.name				= "es7000",
 	.probe				= probe_es7000,
 	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
-	.apic_id_registered		= apic_id_registered,
+	.apic_id_registered		= es7000_apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
 	.int_dest_mode			= INT_DEST_MODE,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 9691b4e1654..b22a79b15b1 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -49,7 +49,7 @@ struct genapic apic_numaq = {
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
 	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= apic_id_registered,
+	.apic_id_registered		= numaq_apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
 	.int_dest_mode			= INT_DEST_MODE,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 0eea9fbb2a5..744fa1b86ef 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -42,7 +42,7 @@ struct genapic apic_summit = {
 	.name				= "summit",
 	.probe				= probe_summit,
 	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
-	.apic_id_registered		= apic_id_registered,
+	.apic_id_registered		= summit_apic_id_registered,
 
 	.int_delivery_mode		= INT_DELIVERY_MODE,
 	.int_dest_mode			= INT_DEST_MODE,
-- 
cgit v1.2.3


From f8987a1093cc7a896137e264c24e04d4048e9f95 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:02:31 +0100
Subject: x86, genapic: rename int_delivery_mode, et. al.

int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...

The standard naming for such attributes is 'irq' - so rename the following
fields and macros:

 int_delivery_mode => irq_delivery_mode
 INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
 int_dest_mode     => irq_dest_mode
 INT_DEST_MODE     => IRQ_DEST_MODE

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  4 ++--
 arch/x86/include/asm/es7000/apic.h            |  4 ++--
 arch/x86/include/asm/genapic.h                |  4 ++--
 arch/x86/include/asm/mach-default/mach_apic.h |  8 +++----
 arch/x86/include/asm/mach-generic/mach_apic.h |  4 ++--
 arch/x86/include/asm/numaq/apic.h             |  4 ++--
 arch/x86/include/asm/summit/apic.h            |  4 ++--
 arch/x86/kernel/genapic_flat_64.c             |  8 +++----
 arch/x86/kernel/genx2apic_cluster.c           |  4 ++--
 arch/x86/kernel/genx2apic_phys.c              |  4 ++--
 arch/x86/kernel/genx2apic_uv_x.c              |  4 ++--
 arch/x86/kernel/io_apic.c                     | 30 +++++++++++++--------------
 arch/x86/mach-generic/bigsmp.c                |  4 ++--
 arch/x86/mach-generic/default.c               |  4 ++--
 arch/x86/mach-generic/es7000.c                |  8 +++----
 arch/x86/mach-generic/numaq.c                 |  4 ++--
 arch/x86/mach-generic/summit.c                |  4 ++--
 17 files changed, 53 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 42c56df3ff3..8ff8bba8833 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -21,8 +21,8 @@ static inline const cpumask_t *target_cpus(void)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL	0
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE	(dest_Fixed)
-#define INT_DEST_MODE		(0)    /* phys delivery to target proc */
+#define IRQ_DELIVERY_MODE	(dest_Fixed)
+#define IRQ_DEST_MODE		(0)    /* phys delivery to target proc */
 #define NO_BALANCE_IRQ		(0)
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index a1819b510de..830e8731cc0 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -27,8 +27,8 @@ static inline const cpumask_t *target_cpus(void)
 #define NO_BALANCE_IRQ_CLUSTER		(1)
 
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE	(dest_Fixed)
-#define INT_DEST_MODE		(0)    /* phys delivery to target procs */
+#define IRQ_DELIVERY_MODE	(dest_Fixed)
+#define IRQ_DEST_MODE		(0)    /* phys delivery to target procs */
 #define NO_BALANCE_IRQ		(0)
 #undef  APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL	0x0
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 108abdf6953..e998e3df5d2 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -23,8 +23,8 @@ struct genapic {
 	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
 	int (*apic_id_registered)(void);
 
-	u32 int_delivery_mode;
-	u32 int_dest_mode;
+	u32 irq_delivery_mode;
+	u32 irq_dest_mode;
 
 	const struct cpumask *(*target_cpus)(void);
 
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 6a454fa0b43..b5364793262 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -22,8 +22,8 @@ static inline const struct cpumask *target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define INT_DELIVERY_MODE (apic->int_delivery_mode)
-#define INT_DEST_MODE (apic->int_dest_mode)
+#define IRQ_DELIVERY_MODE (apic->irq_delivery_mode)
+#define IRQ_DEST_MODE (apic->irq_dest_mode)
 #define TARGET_CPUS	  (apic->target_cpus())
 #define init_apic_ldr (apic->init_apic_ldr)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
@@ -35,8 +35,8 @@ static inline const struct cpumask *target_cpus(void)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void setup_apic_routing(void);
 #else
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+#define IRQ_DELIVERY_MODE dest_LowestPrio
+#define IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
 #define TARGET_CPUS (target_cpus())
 #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index cc6e9d70f06..03492f2219e 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -5,8 +5,8 @@
 
 #define esr_disable (apic->ESR_DISABLE)
 #define NO_BALANCE_IRQ (apic->no_balance_irq)
-#define INT_DELIVERY_MODE (apic->int_delivery_mode)
-#define INT_DEST_MODE (apic->int_dest_mode)
+#define IRQ_DELIVERY_MODE (apic->irq_delivery_mode)
+#define IRQ_DEST_MODE (apic->irq_dest_mode)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL (apic->apic_destination_logical)
 #define TARGET_CPUS	  (apic->target_cpus())
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 59b62b19d02..d885e35df18 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -15,8 +15,8 @@ static inline const cpumask_t *target_cpus(void)
 #define NO_BALANCE_IRQ (1)
 #define esr_disable (1)
 
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
+#define IRQ_DELIVERY_MODE dest_LowestPrio
+#define IRQ_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index a36ef6e4b1f..0b7d0d14e56 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -24,8 +24,8 @@ static inline const cpumask_t *target_cpus(void)
 	return &cpumask_of_cpu(0);
 }
 
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+#define IRQ_DELIVERY_MODE (dest_LowestPrio)
+#define IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index e9233374cef..0a263d6bb5e 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -180,8 +180,8 @@ struct genapic apic_flat =  {
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
 	.apic_id_registered		= flat_apic_id_registered,
 
-	.int_delivery_mode		= dest_LowestPrio,
-	.int_dest_mode			= (APIC_DEST_LOGICAL != 0),
+	.irq_delivery_mode		= dest_LowestPrio,
+	.irq_dest_mode			= (APIC_DEST_LOGICAL != 0),
 
 	.target_cpus			= flat_target_cpus,
 	.ESR_DISABLE			= 0,
@@ -326,8 +326,8 @@ struct genapic apic_physflat =  {
 	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
 	.apic_id_registered		= flat_apic_id_registered,
 
-	.int_delivery_mode		= dest_Fixed,
-	.int_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
 
 	.target_cpus			= physflat_target_cpus,
 	.ESR_DISABLE			= 0,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index fc855e503ac..e9ff7dc9a0f 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -182,8 +182,8 @@ struct genapic apic_x2apic_cluster = {
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
-	.int_delivery_mode		= dest_LowestPrio,
-	.int_dest_mode			= (APIC_DEST_LOGICAL != 0),
+	.irq_delivery_mode		= dest_LowestPrio,
+	.irq_dest_mode			= (APIC_DEST_LOGICAL != 0),
 
 	.target_cpus			= x2apic_target_cpus,
 	.ESR_DISABLE			= 0,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index c98361fb7ee..8141b5a88f6 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -178,8 +178,8 @@ struct genapic apic_x2apic_phys = {
 	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
 	.apic_id_registered		= x2apic_apic_id_registered,
 
-	.int_delivery_mode		= dest_Fixed,
-	.int_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
 
 	.target_cpus			= x2apic_target_cpus,
 	.ESR_DISABLE			= 0,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 94f606f204a..6a73cad0d3e 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -243,8 +243,8 @@ struct genapic apic_x2apic_uv_x = {
 	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
 	.apic_id_registered		= uv_apic_id_registered,
 
-	.int_delivery_mode		= dest_Fixed,
-	.int_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
 
 	.target_cpus			= uv_target_cpus,
 	.ESR_DISABLE			= 0,
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 7283234229f..5f967b9c9af 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1514,9 +1514,9 @@ static int setup_ioapic_entry(int apic_id, int irq,
 		memset(&irte, 0, sizeof(irte));
 
 		irte.present = 1;
-		irte.dst_mode = INT_DEST_MODE;
+		irte.dst_mode = IRQ_DEST_MODE;
 		irte.trigger_mode = trigger;
-		irte.dlvry_mode = INT_DELIVERY_MODE;
+		irte.dlvry_mode = IRQ_DELIVERY_MODE;
 		irte.vector = vector;
 		irte.dest_id = IRTE_DEST(destination);
 
@@ -1529,8 +1529,8 @@ static int setup_ioapic_entry(int apic_id, int irq,
 	} else
 #endif
 	{
-		entry->delivery_mode = INT_DELIVERY_MODE;
-		entry->dest_mode = INT_DEST_MODE;
+		entry->delivery_mode = IRQ_DELIVERY_MODE;
+		entry->dest_mode = IRQ_DEST_MODE;
 		entry->dest = destination;
 	}
 
@@ -1659,10 +1659,10 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
 	 * We use logical delivery to get the timer IRQ
 	 * to the first CPU.
 	 */
-	entry.dest_mode = INT_DEST_MODE;
+	entry.dest_mode = IRQ_DEST_MODE;
 	entry.mask = 1;					/* mask IRQ now */
 	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.delivery_mode = INT_DELIVERY_MODE;
+	entry.delivery_mode = IRQ_DELIVERY_MODE;
 	entry.polarity = 0;
 	entry.trigger = 0;
 	entry.vector = vector;
@@ -3279,9 +3279,9 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		memset (&irte, 0, sizeof(irte));
 
 		irte.present = 1;
-		irte.dst_mode = INT_DEST_MODE;
+		irte.dst_mode = IRQ_DEST_MODE;
 		irte.trigger_mode = 0; /* edge */
-		irte.dlvry_mode = INT_DELIVERY_MODE;
+		irte.dlvry_mode = IRQ_DELIVERY_MODE;
 		irte.vector = cfg->vector;
 		irte.dest_id = IRTE_DEST(dest);
 
@@ -3299,10 +3299,10 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		msg->address_hi = MSI_ADDR_BASE_HI;
 		msg->address_lo =
 			MSI_ADDR_BASE_LO |
-			((INT_DEST_MODE == 0) ?
+			((IRQ_DEST_MODE == 0) ?
 				MSI_ADDR_DEST_MODE_PHYSICAL:
 				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
+			((IRQ_DELIVERY_MODE != dest_LowestPrio) ?
 				MSI_ADDR_REDIRECTION_CPU:
 				MSI_ADDR_REDIRECTION_LOWPRI) |
 			MSI_ADDR_DEST_ID(dest);
@@ -3310,7 +3310,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		msg->data =
 			MSI_DATA_TRIGGER_EDGE |
 			MSI_DATA_LEVEL_ASSERT |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
+			((IRQ_DELIVERY_MODE != dest_LowestPrio) ?
 				MSI_DATA_DELIVERY_FIXED:
 				MSI_DATA_DELIVERY_LOWPRI) |
 			MSI_DATA_VECTOR(cfg->vector);
@@ -3711,11 +3711,11 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 			HT_IRQ_LOW_BASE |
 			HT_IRQ_LOW_DEST_ID(dest) |
 			HT_IRQ_LOW_VECTOR(cfg->vector) |
-			((INT_DEST_MODE == 0) ?
+			((IRQ_DEST_MODE == 0) ?
 				HT_IRQ_LOW_DM_PHYSICAL :
 				HT_IRQ_LOW_DM_LOGICAL) |
 			HT_IRQ_LOW_RQEOI_EDGE |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
+			((IRQ_DELIVERY_MODE != dest_LowestPrio) ?
 				HT_IRQ_LOW_MT_FIXED :
 				HT_IRQ_LOW_MT_ARBITRATED) |
 			HT_IRQ_LOW_IRQ_MASKED;
@@ -3763,8 +3763,8 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
 
 	entry->vector = cfg->vector;
-	entry->delivery_mode = INT_DELIVERY_MODE;
-	entry->dest_mode = INT_DEST_MODE;
+	entry->delivery_mode = IRQ_DELIVERY_MODE;
+	entry->dest_mode = IRQ_DEST_MODE;
 	entry->polarity = 0;
 	entry->trigger = 0;
 	entry->mask = 0;
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 17abf5c6242..c15c1aa2dc7 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -64,8 +64,8 @@ struct genapic apic_bigsmp = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= bigsmp_apic_id_registered,
 
-	.int_delivery_mode		= INT_DELIVERY_MODE,
-	.int_dest_mode			= INT_DEST_MODE,
+	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 1f30559e9d8..d32b175eff8 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -31,8 +31,8 @@ struct genapic apic_default = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= default_apic_id_registered,
 
-	.int_delivery_mode		= INT_DELIVERY_MODE,
-	.int_dest_mode			= INT_DEST_MODE,
+	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index d68ca0bce67..06653892953 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -21,8 +21,8 @@
 void __init es7000_update_genapic_to_cluster(void)
 {
 	apic->target_cpus = target_cpus_cluster;
-	apic->int_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
-	apic->int_dest_mode = INT_DEST_MODE_CLUSTER;
+	apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
+	apic->irq_dest_mode = INT_DEST_MODE_CLUSTER;
 	apic->no_balance_irq = NO_BALANCE_IRQ_CLUSTER;
 
 	apic->init_apic_ldr = init_apic_ldr_cluster;
@@ -107,8 +107,8 @@ struct genapic apic_es7000 = {
 	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
 	.apic_id_registered		= es7000_apic_id_registered,
 
-	.int_delivery_mode		= INT_DELIVERY_MODE,
-	.int_dest_mode			= INT_DEST_MODE,
+	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index b22a79b15b1..401957142fd 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -51,8 +51,8 @@ struct genapic apic_numaq = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= numaq_apic_id_registered,
 
-	.int_delivery_mode		= INT_DELIVERY_MODE,
-	.int_dest_mode			= INT_DEST_MODE,
+	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 744fa1b86ef..946da7aa762 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -44,8 +44,8 @@ struct genapic apic_summit = {
 	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
 	.apic_id_registered		= summit_apic_id_registered,
 
-	.int_delivery_mode		= INT_DELIVERY_MODE,
-	.int_dest_mode			= INT_DEST_MODE,
+	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From 9b5bc8dc12421a4b17047061f473d85c1797d543 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:09:58 +0100
Subject: x86, apic: remove IRQ_DEST_MODE / IRQ_DELIVERY_MODE

Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.

The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.

Furthermore, it also obscures subarchitecture details.

So replace it with apic->irq_dest_mode / etc. accesses.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  4 ++--
 arch/x86/include/asm/es7000/apic.h            |  4 ++--
 arch/x86/include/asm/mach-default/mach_apic.h |  5 ++---
 arch/x86/include/asm/mach-generic/mach_apic.h |  2 --
 arch/x86/include/asm/numaq/apic.h             |  4 ++--
 arch/x86/include/asm/summit/apic.h            |  4 ++--
 arch/x86/kernel/io_apic.c                     | 30 +++++++++++++--------------
 arch/x86/mach-generic/bigsmp.c                |  4 ++--
 arch/x86/mach-generic/default.c               |  4 ++--
 arch/x86/mach-generic/es7000.c                |  4 ++--
 arch/x86/mach-generic/numaq.c                 |  4 ++--
 arch/x86/mach-generic/summit.c                |  4 ++--
 12 files changed, 35 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 8ff8bba8833..293551b0e61 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -21,8 +21,8 @@ static inline const cpumask_t *target_cpus(void)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL	0
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define IRQ_DELIVERY_MODE	(dest_Fixed)
-#define IRQ_DEST_MODE		(0)    /* phys delivery to target proc */
+#define BIGSMP_IRQ_DELIVERY_MODE (dest_Fixed)
+#define BIGSMP_IRQ_DEST_MODE	(0)    /* phys delivery to target proc */
 #define NO_BALANCE_IRQ		(0)
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 830e8731cc0..690016683f2 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -27,8 +27,8 @@ static inline const cpumask_t *target_cpus(void)
 #define NO_BALANCE_IRQ_CLUSTER		(1)
 
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define IRQ_DELIVERY_MODE	(dest_Fixed)
-#define IRQ_DEST_MODE		(0)    /* phys delivery to target procs */
+#define ES7000_IRQ_DELIVERY_MODE (dest_Fixed)
+#define ES7000_IRQ_DEST_MODE	(0)    /* phys delivery to target procs */
 #define NO_BALANCE_IRQ		(0)
 #undef  APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL	0x0
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index b5364793262..eafbf4f2038 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -22,7 +22,6 @@ static inline const struct cpumask *target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define IRQ_DELIVERY_MODE (apic->irq_delivery_mode)
 #define IRQ_DEST_MODE (apic->irq_dest_mode)
 #define TARGET_CPUS	  (apic->target_cpus())
 #define init_apic_ldr (apic->init_apic_ldr)
@@ -35,8 +34,8 @@ static inline const struct cpumask *target_cpus(void)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void setup_apic_routing(void);
 #else
-#define IRQ_DELIVERY_MODE dest_LowestPrio
-#define IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
+#define DEFAULT_IRQ_DELIVERY_MODE dest_LowestPrio
+#define DEFAULT_IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
 #define TARGET_CPUS (target_cpus())
 #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 03492f2219e..387a5d00c43 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -5,8 +5,6 @@
 
 #define esr_disable (apic->ESR_DISABLE)
 #define NO_BALANCE_IRQ (apic->no_balance_irq)
-#define IRQ_DELIVERY_MODE (apic->irq_delivery_mode)
-#define IRQ_DEST_MODE (apic->irq_dest_mode)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL (apic->apic_destination_logical)
 #define TARGET_CPUS	  (apic->target_cpus())
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index d885e35df18..7746035c591 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -15,8 +15,8 @@ static inline const cpumask_t *target_cpus(void)
 #define NO_BALANCE_IRQ (1)
 #define esr_disable (1)
 
-#define IRQ_DELIVERY_MODE dest_LowestPrio
-#define IRQ_DEST_MODE 0     /* physical delivery on LOCAL quad */
+#define NUMAQ_IRQ_DELIVERY_MODE dest_LowestPrio
+#define NUMAQ_IRQ_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 0b7d0d14e56..ea2abe9b597 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -24,8 +24,8 @@ static inline const cpumask_t *target_cpus(void)
 	return &cpumask_of_cpu(0);
 }
 
-#define IRQ_DELIVERY_MODE (dest_LowestPrio)
-#define IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
+#define SUMMIT_IRQ_DELIVERY_MODE (dest_LowestPrio)
+#define SUMMIT_IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 5f967b9c9af..301b6571d70 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1514,9 +1514,9 @@ static int setup_ioapic_entry(int apic_id, int irq,
 		memset(&irte, 0, sizeof(irte));
 
 		irte.present = 1;
-		irte.dst_mode = IRQ_DEST_MODE;
+		irte.dst_mode = apic->irq_dest_mode;
 		irte.trigger_mode = trigger;
-		irte.dlvry_mode = IRQ_DELIVERY_MODE;
+		irte.dlvry_mode = apic->irq_delivery_mode;
 		irte.vector = vector;
 		irte.dest_id = IRTE_DEST(destination);
 
@@ -1529,8 +1529,8 @@ static int setup_ioapic_entry(int apic_id, int irq,
 	} else
 #endif
 	{
-		entry->delivery_mode = IRQ_DELIVERY_MODE;
-		entry->dest_mode = IRQ_DEST_MODE;
+		entry->delivery_mode = apic->irq_delivery_mode;
+		entry->dest_mode = apic->irq_dest_mode;
 		entry->dest = destination;
 	}
 
@@ -1659,10 +1659,10 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
 	 * We use logical delivery to get the timer IRQ
 	 * to the first CPU.
 	 */
-	entry.dest_mode = IRQ_DEST_MODE;
+	entry.dest_mode = apic->irq_dest_mode;
 	entry.mask = 1;					/* mask IRQ now */
 	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.delivery_mode = IRQ_DELIVERY_MODE;
+	entry.delivery_mode = apic->irq_delivery_mode;
 	entry.polarity = 0;
 	entry.trigger = 0;
 	entry.vector = vector;
@@ -3279,9 +3279,9 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		memset (&irte, 0, sizeof(irte));
 
 		irte.present = 1;
-		irte.dst_mode = IRQ_DEST_MODE;
+		irte.dst_mode = apic->irq_dest_mode;
 		irte.trigger_mode = 0; /* edge */
-		irte.dlvry_mode = IRQ_DELIVERY_MODE;
+		irte.dlvry_mode = apic->irq_delivery_mode;
 		irte.vector = cfg->vector;
 		irte.dest_id = IRTE_DEST(dest);
 
@@ -3299,10 +3299,10 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		msg->address_hi = MSI_ADDR_BASE_HI;
 		msg->address_lo =
 			MSI_ADDR_BASE_LO |
-			((IRQ_DEST_MODE == 0) ?
+			((apic->irq_dest_mode == 0) ?
 				MSI_ADDR_DEST_MODE_PHYSICAL:
 				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((IRQ_DELIVERY_MODE != dest_LowestPrio) ?
+			((apic->irq_delivery_mode != dest_LowestPrio) ?
 				MSI_ADDR_REDIRECTION_CPU:
 				MSI_ADDR_REDIRECTION_LOWPRI) |
 			MSI_ADDR_DEST_ID(dest);
@@ -3310,7 +3310,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		msg->data =
 			MSI_DATA_TRIGGER_EDGE |
 			MSI_DATA_LEVEL_ASSERT |
-			((IRQ_DELIVERY_MODE != dest_LowestPrio) ?
+			((apic->irq_delivery_mode != dest_LowestPrio) ?
 				MSI_DATA_DELIVERY_FIXED:
 				MSI_DATA_DELIVERY_LOWPRI) |
 			MSI_DATA_VECTOR(cfg->vector);
@@ -3711,11 +3711,11 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 			HT_IRQ_LOW_BASE |
 			HT_IRQ_LOW_DEST_ID(dest) |
 			HT_IRQ_LOW_VECTOR(cfg->vector) |
-			((IRQ_DEST_MODE == 0) ?
+			((apic->irq_dest_mode == 0) ?
 				HT_IRQ_LOW_DM_PHYSICAL :
 				HT_IRQ_LOW_DM_LOGICAL) |
 			HT_IRQ_LOW_RQEOI_EDGE |
-			((IRQ_DELIVERY_MODE != dest_LowestPrio) ?
+			((apic->irq_delivery_mode != dest_LowestPrio) ?
 				HT_IRQ_LOW_MT_FIXED :
 				HT_IRQ_LOW_MT_ARBITRATED) |
 			HT_IRQ_LOW_IRQ_MASKED;
@@ -3763,8 +3763,8 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
 
 	entry->vector = cfg->vector;
-	entry->delivery_mode = IRQ_DELIVERY_MODE;
-	entry->dest_mode = IRQ_DEST_MODE;
+	entry->delivery_mode = apic->irq_delivery_mode;
+	entry->dest_mode = apic->irq_dest_mode;
 	entry->polarity = 0;
 	entry->trigger = 0;
 	entry->mask = 0;
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index c15c1aa2dc7..e8c1ceca7c9 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -64,8 +64,8 @@ struct genapic apic_bigsmp = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= bigsmp_apic_id_registered,
 
-	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= IRQ_DEST_MODE,
+	.irq_delivery_mode		= BIGSMP_IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= BIGSMP_IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index d32b175eff8..0482106f0e1 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -31,8 +31,8 @@ struct genapic apic_default = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= default_apic_id_registered,
 
-	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= IRQ_DEST_MODE,
+	.irq_delivery_mode		= DEFAULT_IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= DEFAULT_IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 06653892953..5d97408919b 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -107,8 +107,8 @@ struct genapic apic_es7000 = {
 	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
 	.apic_id_registered		= es7000_apic_id_registered,
 
-	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= IRQ_DEST_MODE,
+	.irq_delivery_mode		= ES7000_IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= ES7000_IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 401957142fd..77ac66935fd 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -51,8 +51,8 @@ struct genapic apic_numaq = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= numaq_apic_id_registered,
 
-	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= IRQ_DEST_MODE,
+	.irq_delivery_mode		= NUMAQ_IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= NUMAQ_IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 946da7aa762..7b3f43caf2a 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -44,8 +44,8 @@ struct genapic apic_summit = {
 	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
 	.apic_id_registered		= summit_apic_id_registered,
 
-	.irq_delivery_mode		= IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= IRQ_DEST_MODE,
+	.irq_delivery_mode		= SUMMIT_IRQ_DELIVERY_MODE,
+	.irq_dest_mode			= SUMMIT_IRQ_DEST_MODE,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From dcafa4a8c95ce063cbae0a5e61632bc3c4924e66 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:16:01 +0100
Subject: x86, apic: remove DEFAULT_IRQ_DELIVERY_MODE and DEFAULT_IRQ_DEST_MODE

Impact: cleanup

They were only used in a single place and obscured the apic_default template.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_apic.h | 2 --
 arch/x86/mach-generic/default.c               | 5 +++--
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index eafbf4f2038..f3b2cd42388 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -34,8 +34,6 @@ static inline const struct cpumask *target_cpus(void)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void setup_apic_routing(void);
 #else
-#define DEFAULT_IRQ_DELIVERY_MODE dest_LowestPrio
-#define DEFAULT_IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
 #define TARGET_CPUS (target_cpus())
 #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 0482106f0e1..fe97b0114a0 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -31,8 +31,9 @@ struct genapic apic_default = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= default_apic_id_registered,
 
-	.irq_delivery_mode		= DEFAULT_IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= DEFAULT_IRQ_DEST_MODE,
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From 82daea6b0890f739be1ad4ab1c1b922b1555582e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:16:01 +0100
Subject: x86, apic: remove SUMMIT_IRQ_DELIVERY_MODE and SUMMIT_IRQ_DEST_MODE

Impact: cleanup

They were only used in a single place and obscured the apic_summit template.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/summit/apic.h | 3 ---
 arch/x86/mach-generic/summit.c     | 5 +++--
 2 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index ea2abe9b597..427d0889f6f 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -24,9 +24,6 @@ static inline const cpumask_t *target_cpus(void)
 	return &cpumask_of_cpu(0);
 }
 
-#define SUMMIT_IRQ_DELIVERY_MODE (dest_LowestPrio)
-#define SUMMIT_IRQ_DEST_MODE 1     /* logical delivery broadcast to all procs */
-
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return 0;
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 7b3f43caf2a..1b9164b92b0 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -44,8 +44,9 @@ struct genapic apic_summit = {
 	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
 	.apic_id_registered		= summit_apic_id_registered,
 
-	.irq_delivery_mode		= SUMMIT_IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= SUMMIT_IRQ_DEST_MODE,
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From 1b1bcb3ff4e4934d949574cec90679219ace5412 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:16:01 +0100
Subject: x86, apic: remove NUMAQ_IRQ_DELIVERY_MODE and NUMAQ_IRQ_DEST_MODE

Impact: cleanup

They were only used in a single place and obscured the apic_numaq template.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/numaq/apic.h | 3 ---
 arch/x86/mach-generic/numaq.c     | 5 +++--
 2 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 7746035c591..a9d846769a0 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -15,9 +15,6 @@ static inline const cpumask_t *target_cpus(void)
 #define NO_BALANCE_IRQ (1)
 #define esr_disable (1)
 
-#define NUMAQ_IRQ_DELIVERY_MODE dest_LowestPrio
-#define NUMAQ_IRQ_DEST_MODE 0     /* physical delivery on LOCAL quad */
- 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return physid_isset(apicid, bitmap);
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 77ac66935fd..6daddb6949d 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -51,8 +51,9 @@ struct genapic apic_numaq = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= numaq_apic_id_registered,
 
-	.irq_delivery_mode		= NUMAQ_IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= NUMAQ_IRQ_DEST_MODE,
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* physical delivery on LOCAL quad: */
+	.irq_dest_mode			= 0,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From d8a3539e64f8e27b0ab5bb7e7ba3b8f34b739224 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:16:01 +0100
Subject: x86, apic: remove BIGSMP_IRQ_DELIVERY_MODE and BIGSMP_IRQ_DEST_MODE

Impact: cleanup

They were only used in a single place and obscured the apic_bigsmp
driver template.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h | 2 --
 arch/x86/mach-generic/bigsmp.c     | 5 +++--
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 293551b0e61..dca2d5b01da 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -21,8 +21,6 @@ static inline const cpumask_t *target_cpus(void)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL	0
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define BIGSMP_IRQ_DELIVERY_MODE (dest_Fixed)
-#define BIGSMP_IRQ_DEST_MODE	(0)    /* phys delivery to target proc */
 #define NO_BALANCE_IRQ		(0)
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index e8c1ceca7c9..06be776067a 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -64,8 +64,9 @@ struct genapic apic_bigsmp = {
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= bigsmp_apic_id_registered,
 
-	.irq_delivery_mode		= BIGSMP_IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= BIGSMP_IRQ_DEST_MODE,
+	.irq_delivery_mode		= dest_Fixed,
+	/* phys delivery to target CPU: */
+	.irq_dest_mode			= 0,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From 38bd77a6c35168b03b65f7438cdcc1257d550924 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:16:01 +0100
Subject: x86, apic: remove ES7000_IRQ_DELIVERY_MODE and ES7000_IRQ_DEST_MODE

Impact: cleanup

They were only used in a single place and obscured the apic_es7000
driver template.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/apic.h | 2 --
 arch/x86/mach-generic/es7000.c     | 5 +++--
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 690016683f2..342416b3fad 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -27,8 +27,6 @@ static inline const cpumask_t *target_cpus(void)
 #define NO_BALANCE_IRQ_CLUSTER		(1)
 
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define ES7000_IRQ_DELIVERY_MODE (dest_Fixed)
-#define ES7000_IRQ_DEST_MODE	(0)    /* phys delivery to target procs */
 #define NO_BALANCE_IRQ		(0)
 #undef  APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL	0x0
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 5d97408919b..269a97aef43 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -107,8 +107,9 @@ struct genapic apic_es7000 = {
 	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
 	.apic_id_registered		= es7000_apic_id_registered,
 
-	.irq_delivery_mode		= ES7000_IRQ_DELIVERY_MODE,
-	.irq_dest_mode			= ES7000_IRQ_DEST_MODE,
+	.irq_delivery_mode		= dest_Fixed,
+	/* phys delivery to target CPUs: */
+	.irq_dest_mode			= 0,
 
 	.target_cpus			= target_cpus,
 	.ESR_DISABLE			= esr_disable,
-- 
cgit v1.2.3


From 7fe732862d9697cc1863286fbcace9a67f231b4c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:24:16 +0100
Subject: x86, apic: remove IRQ_DEST_MODE

Remove leftover definition.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_apic.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index f3b2cd42388..ce3bc4845b9 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -22,7 +22,6 @@ static inline const struct cpumask *target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define IRQ_DEST_MODE (apic->irq_dest_mode)
 #define TARGET_CPUS	  (apic->target_cpus())
 #define init_apic_ldr (apic->init_apic_ldr)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
-- 
cgit v1.2.3


From 0a9cc20b9c18372ba5a9fea990f5812f3ee01e32 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:30:40 +0100
Subject: x86, apic: clean up target_cpus methods

Impact: cleanup

Clean up all the target_cpus() namespace overlap that exists
between bigsmp, es7000, mach-default, numaq and summit - by
separating the different functions into different names.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 4 ++--
 arch/x86/include/asm/mach-default/mach_apic.h | 4 ++--
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 2 +-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 10 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index dca2d5b01da..d6aeca3c5a8 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -9,7 +9,7 @@ static inline int bigsmp_apic_id_registered(void)
 	return 1;
 }
 
-static inline const cpumask_t *target_cpus(void)
+static inline const cpumask_t *bigsmp_target_cpus(void)
 {
 #ifdef CONFIG_SMP
 	return &cpu_online_map;
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 342416b3fad..7e5c31a4f8d 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -16,7 +16,7 @@ static inline const cpumask_t *target_cpus_cluster(void)
 	return &CPU_MASK_ALL;
 }
 
-static inline const cpumask_t *target_cpus(void)
+static inline const cpumask_t *es7000_target_cpus(void)
 {
 	return &cpumask_of_cpu(smp_processor_id());
 }
@@ -83,7 +83,7 @@ static inline void setup_apic_routing(void)
 	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
 		(apic_version[apic] == 0x14) ?
 			"Physical Cluster" : "Logical Cluster",
-			nr_ioapics, cpus_addr(*target_cpus())[0]);
+			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
 }
 
 static inline int multi_timer_check(int apic, int irq)
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index ce3bc4845b9..af1607ddd2a 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -8,7 +8,7 @@
 
 #define APIC_DFR_VALUE	(APIC_DFR_FLAT)
 
-static inline const struct cpumask *target_cpus(void)
+static inline const struct cpumask *default_target_cpus(void)
 { 
 #ifdef CONFIG_SMP
 	return cpu_online_mask;
@@ -33,7 +33,7 @@ static inline const struct cpumask *target_cpus(void)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void setup_apic_routing(void);
 #else
-#define TARGET_CPUS (target_cpus())
+#define TARGET_CPUS (default_target_cpus())
 #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
  * Set up the logical destination ID.
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index a9d846769a0..1111ff9e41d 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -7,7 +7,7 @@
 
 #define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
 
-static inline const cpumask_t *target_cpus(void)
+static inline const cpumask_t *numaq_target_cpus(void)
 {
 	return &CPU_MASK_ALL;
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 427d0889f6f..7c1f9151429 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -15,7 +15,7 @@
 
 #define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
 
-static inline const cpumask_t *target_cpus(void)
+static inline const cpumask_t *summit_target_cpus(void)
 {
 	/* CPU_MASK_ALL (0xff) has undefined behaviour with
 	 * dest_LowestPrio mode logical clustered apic interrupt routing
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 06be776067a..d3cead2d2fc 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -68,7 +68,7 @@ struct genapic apic_bigsmp = {
 	/* phys delivery to target CPU: */
 	.irq_dest_mode			= 0,
 
-	.target_cpus			= target_cpus,
+	.target_cpus			= bigsmp_target_cpus,
 	.ESR_DISABLE			= esr_disable,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index fe97b0114a0..a483e22273e 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -35,7 +35,7 @@ struct genapic apic_default = {
 	/* logical delivery broadcast to all CPUs: */
 	.irq_dest_mode			= 1,
 
-	.target_cpus			= target_cpus,
+	.target_cpus			= default_target_cpus,
 	.ESR_DISABLE			= esr_disable,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 269a97aef43..e31f0c35470 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -111,7 +111,7 @@ struct genapic apic_es7000 = {
 	/* phys delivery to target CPUs: */
 	.irq_dest_mode			= 0,
 
-	.target_cpus			= target_cpus,
+	.target_cpus			= es7000_target_cpus,
 	.ESR_DISABLE			= esr_disable,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 6daddb6949d..4b84b5970fb 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -55,7 +55,7 @@ struct genapic apic_numaq = {
 	/* physical delivery on LOCAL quad: */
 	.irq_dest_mode			= 0,
 
-	.target_cpus			= target_cpus,
+	.target_cpus			= numaq_target_cpus,
 	.ESR_DISABLE			= esr_disable,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 1b9164b92b0..e6b956a0848 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -48,7 +48,7 @@ struct genapic apic_summit = {
 	/* logical delivery broadcast to all CPUs: */
 	.irq_dest_mode			= 1,
 
-	.target_cpus			= target_cpus,
+	.target_cpus			= summit_target_cpus,
 	.ESR_DISABLE			= esr_disable,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
-- 
cgit v1.2.3


From fe402e1f2b67a63f1e53ab2a316fc20f7ca4ec91 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 04:32:51 +0100
Subject: x86, apic: clean up / remove TARGET_CPUS

Impact: cleanup

use apic->target_cpus() directly instead of the TARGET_CPUS wrapper.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/apic.h            |  4 ++--
 arch/x86/include/asm/mach-default/mach_apic.h |  2 --
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/include/asm/summit/apic.h            |  2 +-
 arch/x86/kernel/io_apic.c                     | 22 +++++++++++-----------
 5 files changed, 14 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 7e5c31a4f8d..53adda099c9 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -161,7 +161,7 @@ cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 		return 0xFF;
 	/*
 	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = cpumask_first(cpumask);
 	apicid = cpu_to_logical_apicid(cpu);
@@ -194,7 +194,7 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 		return cpu_to_logical_apicid(0);
 	/*
 	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = first_cpu(*cpumask);
 	apicid = cpu_to_logical_apicid(cpu);
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index af1607ddd2a..77a97247587 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -22,7 +22,6 @@ static inline const struct cpumask *default_target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define TARGET_CPUS	  (apic->target_cpus())
 #define init_apic_ldr (apic->init_apic_ldr)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
@@ -33,7 +32,6 @@ static inline const struct cpumask *default_target_cpus(void)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void setup_apic_routing(void);
 #else
-#define TARGET_CPUS (default_target_cpus())
 #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
  * Set up the logical destination ID.
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 387a5d00c43..da2d7780cb5 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -7,7 +7,6 @@
 #define NO_BALANCE_IRQ (apic->no_balance_irq)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL (apic->apic_destination_logical)
-#define TARGET_CPUS	  (apic->target_cpus())
 #define init_apic_ldr (apic->init_apic_ldr)
 #define ioapic_phys_id_map (apic->ioapic_phys_id_map)
 #define setup_apic_routing (apic->setup_apic_routing)
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 7c1f9151429..cf5036f1ce6 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -148,7 +148,7 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 		return (int) 0xFF;
 	/*
 	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
+	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = first_cpu(*cpumask);
 	apicid = cpu_to_logical_apicid(cpu);
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 301b6571d70..7503285e180 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1559,10 +1559,10 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
 
 	cfg = desc->chip_data;
 
-	if (assign_irq_vector(irq, cfg, TARGET_CPUS))
+	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
 		return;
 
-	dest = cpu_mask_to_apicid_and(cfg->domain, TARGET_CPUS);
+	dest = cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 	apic_printk(APIC_VERBOSE,KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
@@ -1661,7 +1661,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
 	 */
 	entry.dest_mode = apic->irq_dest_mode;
 	entry.mask = 1;					/* mask IRQ now */
-	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
+	entry.dest = cpu_mask_to_apicid(apic->target_cpus());
 	entry.delivery_mode = apic->irq_delivery_mode;
 	entry.polarity = 0;
 	entry.trigger = 0;
@@ -2877,7 +2877,7 @@ static inline void __init check_timer(void)
 	 * get/set the timer IRQ vector:
 	 */
 	disable_8259A_irq(0);
-	assign_irq_vector(0, cfg, TARGET_CPUS);
+	assign_irq_vector(0, cfg, apic->target_cpus());
 
 	/*
 	 * As IRQ0 is to be enabled in the 8259A, the virtual
@@ -3195,7 +3195,7 @@ unsigned int create_irq_nr(unsigned int irq_want)
 
 		if (cfg_new->vector != 0)
 			continue;
-		if (__assign_irq_vector(new, cfg_new, TARGET_CPUS) == 0)
+		if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
 			irq = new;
 		break;
 	}
@@ -3261,11 +3261,11 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		return -ENXIO;
 
 	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, TARGET_CPUS);
+	err = assign_irq_vector(irq, cfg, apic->target_cpus());
 	if (err)
 		return err;
 
-	dest = cpu_mask_to_apicid_and(cfg->domain, TARGET_CPUS);
+	dest = cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 #ifdef CONFIG_INTR_REMAP
 	if (irq_remapped(irq)) {
@@ -3698,12 +3698,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 		return -ENXIO;
 
 	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, TARGET_CPUS);
+	err = assign_irq_vector(irq, cfg, apic->target_cpus());
 	if (!err) {
 		struct ht_irq_msg msg;
 		unsigned dest;
 
-		dest = cpu_mask_to_apicid_and(cfg->domain, TARGET_CPUS);
+		dest = cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
 
@@ -3987,7 +3987,7 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 /*
  * This function currently is only a helper for the i386 smp boot process where
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
- * so mask in all cases should simply be TARGET_CPUS
+ * so mask in all cases should simply be apic->target_cpus()
  */
 #ifdef CONFIG_SMP
 void __init setup_ioapic_dest(void)
@@ -4028,7 +4028,7 @@ void __init setup_ioapic_dest(void)
 			    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
 				mask = desc->affinity;
 			else
-				mask = TARGET_CPUS;
+				mask = apic->target_cpus();
 
 #ifdef CONFIG_INTR_REMAP
 			if (intr_remapping_enabled)
-- 
cgit v1.2.3


From f6f52baf2613dd319e9ba3f3319bf1f1c442e4b3 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 05:01:41 +0100
Subject: x86: clean up esr_disable() methods

Impact: cleanup

Most subarchitectures want to disable the APIC ESR (Error Status Register),
because they generally have hardware hacks that wrap standard CPUs into
a bigger system and hence the APIC bus is quite non-standard and weirdnesses
(lockups) have been seen with ESR reporting.

Remove the esr_disable macros and put the desired flag into each
subarchitecture's genapic template directly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 1 -
 arch/x86/include/asm/es7000/apic.h            | 1 -
 arch/x86/include/asm/mach-default/mach_apic.h | 1 -
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 1 -
 arch/x86/include/asm/summit/apic.h            | 1 -
 arch/x86/kernel/apic.c                        | 4 ++--
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 12 files changed, 7 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index d6aeca3c5a8..b550cb11102 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -2,7 +2,6 @@
 #define __ASM_MACH_APIC_H
 
 #define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-#define esr_disable (1)
 
 static inline int bigsmp_apic_id_registered(void)
 {
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 53adda099c9..aa11c768bed 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -4,7 +4,6 @@
 #include <linux/gfp.h>
 
 #define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
-#define esr_disable (1)
 
 static inline int es7000_apic_id_registered(void)
 {
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 77a97247587..5f8d17fdc96 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -18,7 +18,6 @@ static inline const struct cpumask *default_target_cpus(void)
 } 
 
 #define NO_BALANCE_IRQ (0)
-#define esr_disable (0)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index da2d7780cb5..63fe985219f 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define esr_disable (apic->ESR_DISABLE)
 #define NO_BALANCE_IRQ (apic->no_balance_irq)
 #undef APIC_DEST_LOGICAL
 #define APIC_DEST_LOGICAL (apic->apic_destination_logical)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 1111ff9e41d..8ecb3b45c6c 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -13,7 +13,6 @@ static inline const cpumask_t *numaq_target_cpus(void)
 }
 
 #define NO_BALANCE_IRQ (1)
-#define esr_disable (1)
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index cf5036f1ce6..84679e687ad 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -4,7 +4,6 @@
 #include <asm/smp.h>
 #include <linux/gfp.h>
 
-#define esr_disable (1)
 #define NO_BALANCE_IRQ (0)
 
 /* In clustered mode, the high nibble of APIC ID is a cluster number.
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index b6740de18fb..69d8c30d571 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1107,7 +1107,7 @@ static void __cpuinit lapic_setup_esr(void)
 		return;
 	}
 
-	if (esr_disable) {
+	if (apic->ESR_DISABLE) {
 		/*
 		 * Something untraceable is creating bad interrupts on
 		 * secondary quads ... for the moment, just leave the
@@ -1157,7 +1157,7 @@ void __cpuinit setup_local_APIC(void)
 
 #ifdef CONFIG_X86_32
 	/* Pound the ESR really hard over the head with a big hammer - mbligh */
-	if (lapic_is_integrated() && esr_disable) {
+	if (lapic_is_integrated() && apic->ESR_DISABLE) {
 		apic_write(APIC_ESR, 0);
 		apic_write(APIC_ESR, 0);
 		apic_write(APIC_ESR, 0);
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index d3cead2d2fc..f0bb72674f7 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -69,7 +69,7 @@ struct genapic apic_bigsmp = {
 	.irq_dest_mode			= 0,
 
 	.target_cpus			= bigsmp_target_cpus,
-	.ESR_DISABLE			= esr_disable,
+	.ESR_DISABLE			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index a483e22273e..c30141a9aca 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -36,7 +36,7 @@ struct genapic apic_default = {
 	.irq_dest_mode			= 1,
 
 	.target_cpus			= default_target_cpus,
-	.ESR_DISABLE			= esr_disable,
+	.ESR_DISABLE			= 0,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index e31f0c35470..e8aa8fd4f49 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -112,7 +112,7 @@ struct genapic apic_es7000 = {
 	.irq_dest_mode			= 0,
 
 	.target_cpus			= es7000_target_cpus,
-	.ESR_DISABLE			= esr_disable,
+	.ESR_DISABLE			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 4b84b5970fb..860edc8bd90 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -56,7 +56,7 @@ struct genapic apic_numaq = {
 	.irq_dest_mode			= 0,
 
 	.target_cpus			= numaq_target_cpus,
-	.ESR_DISABLE			= esr_disable,
+	.ESR_DISABLE			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index e6b956a0848..cd5ef115a4e 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -49,7 +49,7 @@ struct genapic apic_summit = {
 	.irq_dest_mode			= 1,
 
 	.target_cpus			= summit_target_cpus,
-	.ESR_DISABLE			= esr_disable,
+	.ESR_DISABLE			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
-- 
cgit v1.2.3


From 08125d3edab90644724652eedec3e219e3e0f2e7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 05:08:44 +0100
Subject: x86: rename ->ESR_DISABLE to ->disable_esr

the ->ESR_DISABLE shouting variant was used to enable the esr_disable
macro wrappers. Those ugly macros are removed now so we can rename
->ESR_DISABLE to ->disable_esr

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h      | 2 +-
 arch/x86/kernel/apic.c              | 4 ++--
 arch/x86/kernel/genapic_flat_64.c   | 4 ++--
 arch/x86/kernel/genx2apic_cluster.c | 2 +-
 arch/x86/kernel/genx2apic_phys.c    | 2 +-
 arch/x86/kernel/genx2apic_uv_x.c    | 2 +-
 arch/x86/mach-generic/bigsmp.c      | 2 +-
 arch/x86/mach-generic/default.c     | 2 +-
 arch/x86/mach-generic/es7000.c      | 2 +-
 arch/x86/mach-generic/numaq.c       | 2 +-
 arch/x86/mach-generic/summit.c      | 2 +-
 11 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index e998e3df5d2..7aee4a4c524 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -28,7 +28,7 @@ struct genapic {
 
 	const struct cpumask *(*target_cpus)(void);
 
-	int ESR_DISABLE;
+	int disable_esr;
 
 	int apic_destination_logical;
 	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 69d8c30d571..3853ed76c88 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1107,7 +1107,7 @@ static void __cpuinit lapic_setup_esr(void)
 		return;
 	}
 
-	if (apic->ESR_DISABLE) {
+	if (apic->disable_esr) {
 		/*
 		 * Something untraceable is creating bad interrupts on
 		 * secondary quads ... for the moment, just leave the
@@ -1157,7 +1157,7 @@ void __cpuinit setup_local_APIC(void)
 
 #ifdef CONFIG_X86_32
 	/* Pound the ESR really hard over the head with a big hammer - mbligh */
-	if (lapic_is_integrated() && apic->ESR_DISABLE) {
+	if (lapic_is_integrated() && apic->disable_esr) {
 		apic_write(APIC_ESR, 0);
 		apic_write(APIC_ESR, 0);
 		apic_write(APIC_ESR, 0);
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 0a263d6bb5e..d437a60cc58 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -184,7 +184,7 @@ struct genapic apic_flat =  {
 	.irq_dest_mode			= (APIC_DEST_LOGICAL != 0),
 
 	.target_cpus			= flat_target_cpus,
-	.ESR_DISABLE			= 0,
+	.disable_esr			= 0,
 	.apic_destination_logical	= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
@@ -330,7 +330,7 @@ struct genapic apic_physflat =  {
 	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
 
 	.target_cpus			= physflat_target_cpus,
-	.ESR_DISABLE			= 0,
+	.disable_esr			= 0,
 	.apic_destination_logical	= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index e9ff7dc9a0f..c1cffae4a4c 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -186,7 +186,7 @@ struct genapic apic_x2apic_cluster = {
 	.irq_dest_mode			= (APIC_DEST_LOGICAL != 0),
 
 	.target_cpus			= x2apic_target_cpus,
-	.ESR_DISABLE			= 0,
+	.disable_esr			= 0,
 	.apic_destination_logical	= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 8141b5a88f6..c59602be035 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -182,7 +182,7 @@ struct genapic apic_x2apic_phys = {
 	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
 
 	.target_cpus			= x2apic_target_cpus,
-	.ESR_DISABLE			= 0,
+	.disable_esr			= 0,
 	.apic_destination_logical	= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 6a73cad0d3e..525b4e480a7 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -247,7 +247,7 @@ struct genapic apic_x2apic_uv_x = {
 	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
 
 	.target_cpus			= uv_target_cpus,
-	.ESR_DISABLE			= 0,
+	.disable_esr			= 0,
 	.apic_destination_logical	= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index f0bb72674f7..fe9bf252c06 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -69,7 +69,7 @@ struct genapic apic_bigsmp = {
 	.irq_dest_mode			= 0,
 
 	.target_cpus			= bigsmp_target_cpus,
-	.ESR_DISABLE			= 1,
+	.disable_esr			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index c30141a9aca..d3fe8017e94 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -36,7 +36,7 @@ struct genapic apic_default = {
 	.irq_dest_mode			= 1,
 
 	.target_cpus			= default_target_cpus,
-	.ESR_DISABLE			= 0,
+	.disable_esr			= 0,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index e8aa8fd4f49..b4f8abfb714 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -112,7 +112,7 @@ struct genapic apic_es7000 = {
 	.irq_dest_mode			= 0,
 
 	.target_cpus			= es7000_target_cpus,
-	.ESR_DISABLE			= 1,
+	.disable_esr			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 860edc8bd90..f3b7840d227 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -56,7 +56,7 @@ struct genapic apic_numaq = {
 	.irq_dest_mode			= 0,
 
 	.target_cpus			= numaq_target_cpus,
-	.ESR_DISABLE			= 1,
+	.disable_esr			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index cd5ef115a4e..95e075b61bd 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -49,7 +49,7 @@ struct genapic apic_summit = {
 	.irq_dest_mode			= 1,
 
 	.target_cpus			= summit_target_cpus,
-	.ESR_DISABLE			= 1,
+	.disable_esr			= 1,
 	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
-- 
cgit v1.2.3


From 0b06e734bff7554c31eac4aad2fc9be4adb7c1c1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 05:13:04 +0100
Subject: x86: clean up the APIC_DEST_LOGICAL logic

Impact: cleanup

The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in
a rather nasty way by re-defining it to zero. That is infinitely
fragile and makes it very hard to see what to code really does in
a given context. The very same constant has different meanings and
values - depending on which subarch is enabled.

Untangle this mess by never undefining the constant, but instead
propagating the right values into the genapic driver templates.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  2 --
 arch/x86/include/asm/es7000/apic.h            |  2 --
 arch/x86/include/asm/mach-generic/mach_apic.h |  2 --
 arch/x86/kernel/genapic_flat_64.c             | 12 ++++++------
 arch/x86/kernel/genx2apic_cluster.c           | 10 +++++-----
 arch/x86/kernel/genx2apic_phys.c              |  2 +-
 arch/x86/kernel/genx2apic_uv_x.c              |  4 ++--
 arch/x86/kernel/io_apic.c                     |  2 +-
 arch/x86/kernel/ipi.c                         |  2 +-
 arch/x86/kernel/smpboot.c                     |  2 +-
 arch/x86/mach-generic/bigsmp.c                |  2 +-
 arch/x86/mach-generic/es7000.c                |  2 +-
 12 files changed, 19 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index b550cb11102..7e6e33a6db0 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -17,8 +17,6 @@ static inline const cpumask_t *bigsmp_target_cpus(void)
 #endif
 }
 
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL	0
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
 #define NO_BALANCE_IRQ		(0)
 
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index aa11c768bed..0d770fce4b2 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -27,8 +27,6 @@ static inline const cpumask_t *es7000_target_cpus(void)
 
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
 #define NO_BALANCE_IRQ		(0)
-#undef  APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL	0x0
 
 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 63fe985219f..00d5fe6e676 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -4,8 +4,6 @@
 #include <asm/genapic.h>
 
 #define NO_BALANCE_IRQ (apic->no_balance_irq)
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL (apic->apic_destination_logical)
 #define init_apic_ldr (apic->init_apic_ldr)
 #define ioapic_phys_id_map (apic->ioapic_phys_id_map)
 #define setup_apic_routing (apic->setup_apic_routing)
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index d437a60cc58..fd242c6b3ba 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -74,7 +74,7 @@ static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	__send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
+	__send_IPI_dest_field(mask, vector, apic->apic_destination_logical);
 	local_irq_restore(flags);
 }
 
@@ -114,7 +114,7 @@ static void flat_send_IPI_allbutself(int vector)
 			_flat_send_IPI_mask(mask, vector);
 		}
 	} else if (num_online_cpus() > 1) {
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->apic_destination_logical);
 	}
 }
 
@@ -123,7 +123,7 @@ static void flat_send_IPI_all(int vector)
 	if (vector == NMI_VECTOR)
 		flat_send_IPI_mask(cpu_online_mask, vector);
 	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
+		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->apic_destination_logical);
 }
 
 static unsigned int get_apic_id(unsigned long x)
@@ -181,11 +181,11 @@ struct genapic apic_flat =  {
 	.apic_id_registered		= flat_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
-	.irq_dest_mode			= (APIC_DEST_LOGICAL != 0),
+	.irq_dest_mode			= 1, /* logical */
 
 	.target_cpus			= flat_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= 0,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
@@ -327,7 +327,7 @@ struct genapic apic_physflat =  {
 	.apic_id_registered		= flat_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+	.irq_dest_mode			= 0, /* physical */
 
 	.target_cpus			= physflat_target_cpus,
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index c1cffae4a4c..a76e75ecc20 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -64,7 +64,7 @@ static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
 	for_each_cpu(query_cpu, mask)
 		__x2apic_send_IPI_dest(
 			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-			vector, APIC_DEST_LOGICAL);
+			vector, apic->apic_destination_logical);
 	local_irq_restore(flags);
 }
 
@@ -80,7 +80,7 @@ static void x2apic_send_IPI_mask_allbutself(const struct cpumask *mask,
 		if (query_cpu != this_cpu)
 			__x2apic_send_IPI_dest(
 				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, APIC_DEST_LOGICAL);
+				vector, apic->apic_destination_logical);
 	local_irq_restore(flags);
 }
 
@@ -95,7 +95,7 @@ static void x2apic_send_IPI_allbutself(int vector)
 		if (query_cpu != this_cpu)
 			__x2apic_send_IPI_dest(
 				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, APIC_DEST_LOGICAL);
+				vector, apic->apic_destination_logical);
 	local_irq_restore(flags);
 }
 
@@ -183,11 +183,11 @@ struct genapic apic_x2apic_cluster = {
 	.apic_id_registered		= x2apic_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
-	.irq_dest_mode			= (APIC_DEST_LOGICAL != 0),
+	.irq_dest_mode			= 1, /* logical */
 
 	.target_cpus			= x2apic_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= 0,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index c59602be035..9b6d68deb14 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -179,7 +179,7 @@ struct genapic apic_x2apic_phys = {
 	.apic_id_registered		= x2apic_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+	.irq_dest_mode			= 0, /* physical */
 
 	.target_cpus			= x2apic_target_cpus,
 	.disable_esr			= 0,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 525b4e480a7..0a756800c11 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -244,11 +244,11 @@ struct genapic apic_x2apic_uv_x = {
 	.apic_id_registered		= uv_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= (APIC_DEST_PHYSICAL != 0),
+	.irq_dest_mode			= 1, /* logical */
 
 	.target_cpus			= uv_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= 0,
+	.apic_destination_logical	= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 7503285e180..17526d7a8ab 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -806,7 +806,7 @@ void send_IPI_self(int vector)
 	 * Wait for idle.
 	 */
 	apic_wait_icr_idle();
-	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
+	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | apic->apic_destination_logical;
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 285bbf8831f..400b7bd48f6 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -30,7 +30,7 @@
 
 static inline int __prepare_ICR(unsigned int shortcut, int vector)
 {
-	unsigned int icr = shortcut | APIC_DEST_LOGICAL;
+	unsigned int icr = shortcut | apic->apic_destination_logical;
 
 	switch (vector) {
 	default:
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f9dbcff4354..f0a173718d9 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -583,7 +583,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
 	/* Target chip */
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid);
+	apic_icr_write(APIC_DM_NMI |  apic->apic_destination_logical, logical_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index fe9bf252c06..13ee7dc9b95 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -70,7 +70,7 @@ struct genapic apic_bigsmp = {
 
 	.target_cpus			= bigsmp_target_cpus,
 	.disable_esr			= 1,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.apic_destination_logical	= 0,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index b4f8abfb714..61b5da213ce 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -113,7 +113,7 @@ struct genapic apic_es7000 = {
 
 	.target_cpus			= es7000_target_cpus,
 	.disable_esr			= 1,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.apic_destination_logical	= 0,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
-- 
cgit v1.2.3


From bdb1a9b62fc182d4da3143e346f7a0925d243352 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 05:29:25 +0100
Subject: x86, apic: rename genapic::apic_destination_logical to
 genapic::dest_logical

This field name was unreasonably long - shorten it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h      |  2 +-
 arch/x86/kernel/genapic_flat_64.c   | 10 +++++-----
 arch/x86/kernel/genx2apic_cluster.c |  8 ++++----
 arch/x86/kernel/genx2apic_phys.c    |  2 +-
 arch/x86/kernel/genx2apic_uv_x.c    |  2 +-
 arch/x86/kernel/io_apic.c           |  2 +-
 arch/x86/kernel/ipi.c               |  2 +-
 arch/x86/kernel/smpboot.c           |  2 +-
 arch/x86/mach-generic/bigsmp.c      |  2 +-
 arch/x86/mach-generic/default.c     |  2 +-
 arch/x86/mach-generic/es7000.c      |  2 +-
 arch/x86/mach-generic/numaq.c       |  2 +-
 arch/x86/mach-generic/summit.c      |  2 +-
 13 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 7aee4a4c524..f9d1ec018fd 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -30,7 +30,7 @@ struct genapic {
 
 	int disable_esr;
 
-	int apic_destination_logical;
+	int dest_logical;
 	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
 	unsigned long (*check_apicid_present)(int apicid);
 
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index fd242c6b3ba..d22cbdaee20 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -74,7 +74,7 @@ static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	__send_IPI_dest_field(mask, vector, apic->apic_destination_logical);
+	__send_IPI_dest_field(mask, vector, apic->dest_logical);
 	local_irq_restore(flags);
 }
 
@@ -114,7 +114,7 @@ static void flat_send_IPI_allbutself(int vector)
 			_flat_send_IPI_mask(mask, vector);
 		}
 	} else if (num_online_cpus() > 1) {
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->apic_destination_logical);
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->dest_logical);
 	}
 }
 
@@ -123,7 +123,7 @@ static void flat_send_IPI_all(int vector)
 	if (vector == NMI_VECTOR)
 		flat_send_IPI_mask(cpu_online_mask, vector);
 	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->apic_destination_logical);
+		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->dest_logical);
 }
 
 static unsigned int get_apic_id(unsigned long x)
@@ -185,7 +185,7 @@ struct genapic apic_flat =  {
 
 	.target_cpus			= flat_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
@@ -331,7 +331,7 @@ struct genapic apic_physflat =  {
 
 	.target_cpus			= physflat_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= 0,
+	.dest_logical			= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index a76e75ecc20..b91a48eae52 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -64,7 +64,7 @@ static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
 	for_each_cpu(query_cpu, mask)
 		__x2apic_send_IPI_dest(
 			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-			vector, apic->apic_destination_logical);
+			vector, apic->dest_logical);
 	local_irq_restore(flags);
 }
 
@@ -80,7 +80,7 @@ static void x2apic_send_IPI_mask_allbutself(const struct cpumask *mask,
 		if (query_cpu != this_cpu)
 			__x2apic_send_IPI_dest(
 				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->apic_destination_logical);
+				vector, apic->dest_logical);
 	local_irq_restore(flags);
 }
 
@@ -95,7 +95,7 @@ static void x2apic_send_IPI_allbutself(int vector)
 		if (query_cpu != this_cpu)
 			__x2apic_send_IPI_dest(
 				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->apic_destination_logical);
+				vector, apic->dest_logical);
 	local_irq_restore(flags);
 }
 
@@ -187,7 +187,7 @@ struct genapic apic_x2apic_cluster = {
 
 	.target_cpus			= x2apic_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 9b6d68deb14..f070e86af0f 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -183,7 +183,7 @@ struct genapic apic_x2apic_phys = {
 
 	.target_cpus			= x2apic_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= 0,
+	.dest_logical			= 0,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 0a756800c11..c8a89158679 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -248,7 +248,7 @@ struct genapic apic_x2apic_uv_x = {
 
 	.target_cpus			= uv_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 17526d7a8ab..7f8b32b2089 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -806,7 +806,7 @@ void send_IPI_self(int vector)
 	 * Wait for idle.
 	 */
 	apic_wait_icr_idle();
-	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | apic->apic_destination_logical;
+	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | apic->dest_logical;
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 400b7bd48f6..e2e4895ca69 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -30,7 +30,7 @@
 
 static inline int __prepare_ICR(unsigned int shortcut, int vector)
 {
-	unsigned int icr = shortcut | apic->apic_destination_logical;
+	unsigned int icr = shortcut | apic->dest_logical;
 
 	switch (vector) {
 	default:
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f0a173718d9..45c096f605f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -583,7 +583,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
 	/* Target chip */
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_icr_write(APIC_DM_NMI |  apic->apic_destination_logical, logical_apicid);
+	apic_icr_write(APIC_DM_NMI | apic->dest_logical, logical_apicid);
 
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 13ee7dc9b95..7c52840f205 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -70,7 +70,7 @@ struct genapic apic_bigsmp = {
 
 	.target_cpus			= bigsmp_target_cpus,
 	.disable_esr			= 1,
-	.apic_destination_logical	= 0,
+	.dest_logical			= 0,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index d3fe8017e94..53fa1ad8318 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -37,7 +37,7 @@ struct genapic apic_default = {
 
 	.target_cpus			= default_target_cpus,
 	.disable_esr			= 0,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 61b5da213ce..50fed0225cd 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -113,7 +113,7 @@ struct genapic apic_es7000 = {
 
 	.target_cpus			= es7000_target_cpus,
 	.disable_esr			= 1,
-	.apic_destination_logical	= 0,
+	.dest_logical			= 0,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index f3b7840d227..1fb1b1a4aa0 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -57,7 +57,7 @@ struct genapic apic_numaq = {
 
 	.target_cpus			= numaq_target_cpus,
 	.disable_esr			= 1,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 95e075b61bd..5c27d4d824e 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -50,7 +50,7 @@ struct genapic apic_summit = {
 
 	.target_cpus			= summit_target_cpus,
 	.disable_esr			= 1,
-	.apic_destination_logical	= APIC_DEST_LOGICAL,
+	.dest_logical			= APIC_DEST_LOGICAL,
 	.check_apicid_used		= check_apicid_used,
 	.check_apicid_present		= check_apicid_present,
 
-- 
cgit v1.2.3


From d1d7cae8fd54a301a0de531b48451649933ffdcf Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 05:41:42 +0100
Subject: x86, apic: clean up check_apicid*() callbacks

Clean up these methods - to make it clearer which function is
used in which case.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 9 +++++----
 arch/x86/include/asm/es7000/apic.h            | 5 +++--
 arch/x86/include/asm/mach-default/mach_apic.h | 4 ++--
 arch/x86/include/asm/mach-generic/mach_apic.h | 2 --
 arch/x86/include/asm/numaq/apic.h             | 5 +++--
 arch/x86/include/asm/summit/apic.h            | 5 +++--
 arch/x86/kernel/io_apic.c                     | 6 +++---
 arch/x86/mach-generic/bigsmp.c                | 4 ++--
 arch/x86/mach-generic/default.c               | 4 ++--
 arch/x86/mach-generic/es7000.c                | 4 ++--
 arch/x86/mach-generic/numaq.c                 | 4 ++--
 arch/x86/mach-generic/summit.c                | 4 ++--
 12 files changed, 29 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 7e6e33a6db0..bd52d4d86f0 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -20,14 +20,15 @@ static inline const cpumask_t *bigsmp_target_cpus(void)
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
 #define NO_BALANCE_IRQ		(0)
 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long
+bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
-	return (0);
+	return 0;
 }
 
-static inline unsigned long check_apicid_present(int bit)
+static inline unsigned long bigsmp_check_apicid_present(int bit)
 {
-	return (1);
+	return 1;
 }
 
 static inline unsigned long calculate_ldr(int cpu)
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 0d770fce4b2..cd888daa193 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -28,11 +28,12 @@ static inline const cpumask_t *es7000_target_cpus(void)
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
 #define NO_BALANCE_IRQ		(0)
 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long
+es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return 0;
 }
-static inline unsigned long check_apicid_present(int bit)
+static inline unsigned long es7000_check_apicid_present(int bit)
 {
 	return physid_isset(bit, phys_cpu_present_map);
 }
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 5f8d17fdc96..064bc11a991 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -105,12 +105,12 @@ static inline void vector_allocation_domain(int cpu, struct cpumask *retmask)
 }
 #endif
 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return physid_isset(apicid, bitmap);
 }
 
-static inline unsigned long check_apicid_present(int bit)
+static inline unsigned long default_check_apicid_present(int bit)
 {
 	return physid_isset(bit, phys_cpu_present_map);
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 00d5fe6e676..e035f88dfcd 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -13,9 +13,7 @@
 #define cpu_present_to_apicid (apic->cpu_present_to_apicid)
 #define apicid_to_cpu_present (apic->apicid_to_cpu_present)
 #define setup_portio_remap (apic->setup_portio_remap)
-#define check_apicid_present (apic->check_apicid_present)
 #define check_phys_apicid_present (apic->check_phys_apicid_present)
-#define check_apicid_used (apic->check_apicid_used)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
 #define vector_allocation_domain (apic->vector_allocation_domain)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 8ecb3b45c6c..571fdaeafaa 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -14,11 +14,12 @@ static inline const cpumask_t *numaq_target_cpus(void)
 
 #define NO_BALANCE_IRQ (1)
 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long
+numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return physid_isset(apicid, bitmap);
 }
-static inline unsigned long check_apicid_present(int bit)
+static inline unsigned long numaq_check_apicid_present(int bit)
 {
 	return physid_isset(bit, phys_cpu_present_map);
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 84679e687ad..482038b244b 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -23,13 +23,14 @@ static inline const cpumask_t *summit_target_cpus(void)
 	return &cpumask_of_cpu(0);
 }
 
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long
+summit_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return 0;
 }
 
 /* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long check_apicid_present(int bit)
+static inline unsigned long summit_check_apicid_present(int bit)
 {
 	return 1;
 }
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 7f8b32b2089..733ecf17272 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -2135,7 +2135,7 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 * system must have a unique ID or we get lots of nice
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
-		if (check_apicid_used(phys_id_present_map,
+		if (apic->check_apicid_used(phys_id_present_map,
 					mp_ioapics[apic_id].apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
 				apic_id, mp_ioapics[apic_id].apicid);
@@ -3878,10 +3878,10 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 	 * Every APIC in a system must have a unique ID or we get lots of nice
 	 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 */
-	if (check_apicid_used(apic_id_map, apic_id)) {
+	if (apic->check_apicid_used(apic_id_map, apic_id)) {
 
 		for (i = 0; i < get_physical_broadcast(); i++) {
-			if (!check_apicid_used(apic_id_map, i))
+			if (!apic->check_apicid_used(apic_id_map, i))
 				break;
 		}
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 7c52840f205..aa8443f6c0f 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -71,8 +71,8 @@ struct genapic apic_bigsmp = {
 	.target_cpus			= bigsmp_target_cpus,
 	.disable_esr			= 1,
 	.dest_logical			= 0,
-	.check_apicid_used		= check_apicid_used,
-	.check_apicid_present		= check_apicid_present,
+	.check_apicid_used		= bigsmp_check_apicid_used,
+	.check_apicid_present		= bigsmp_check_apicid_present,
 
 	.no_balance_irq			= NO_BALANCE_IRQ,
 	.no_ioapic_check		= 0,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 53fa1ad8318..47f6b5b06ba 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -38,8 +38,8 @@ struct genapic apic_default = {
 	.target_cpus			= default_target_cpus,
 	.disable_esr			= 0,
 	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= check_apicid_used,
-	.check_apicid_present		= check_apicid_present,
+	.check_apicid_used		= default_check_apicid_used,
+	.check_apicid_present		= default_check_apicid_present,
 
 	.no_balance_irq			= NO_BALANCE_IRQ,
 	.no_ioapic_check		= 0,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 50fed0225cd..5633f3296e1 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -114,8 +114,8 @@ struct genapic apic_es7000 = {
 	.target_cpus			= es7000_target_cpus,
 	.disable_esr			= 1,
 	.dest_logical			= 0,
-	.check_apicid_used		= check_apicid_used,
-	.check_apicid_present		= check_apicid_present,
+	.check_apicid_used		= es7000_check_apicid_used,
+	.check_apicid_present		= es7000_check_apicid_present,
 
 	.no_balance_irq			= NO_BALANCE_IRQ,
 	.no_ioapic_check		= 0,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 1fb1b1a4aa0..d85206d8e4a 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -58,8 +58,8 @@ struct genapic apic_numaq = {
 	.target_cpus			= numaq_target_cpus,
 	.disable_esr			= 1,
 	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= check_apicid_used,
-	.check_apicid_present		= check_apicid_present,
+	.check_apicid_used		= numaq_check_apicid_used,
+	.check_apicid_present		= numaq_check_apicid_present,
 
 	.no_balance_irq			= NO_BALANCE_IRQ,
 	.no_ioapic_check		= 0,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 5c27d4d824e..f54cf73d3ed 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -51,8 +51,8 @@ struct genapic apic_summit = {
 	.target_cpus			= summit_target_cpus,
 	.disable_esr			= 1,
 	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= check_apicid_used,
-	.check_apicid_present		= check_apicid_present,
+	.check_apicid_used		= summit_check_apicid_used,
+	.check_apicid_present		= summit_check_apicid_present,
 
 	.no_balance_irq			= NO_BALANCE_IRQ,
 	.no_ioapic_check		= 0,
-- 
cgit v1.2.3


From 2e867b17cc02e1799f18126af0ddd7b63dd8f6f4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 05:57:56 +0100
Subject: x86, apic: remove no_balance_irq and no_ioapic_check flags

These flags are completely unused. (the in-kernel IRQ balancer has
been removed from the upstream kernel.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 1 -
 arch/x86/include/asm/es7000/apic.h            | 2 --
 arch/x86/include/asm/genapic.h                | 3 ---
 arch/x86/include/asm/mach-default/mach_apic.h | 2 --
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 --
 arch/x86/include/asm/summit/apic.h            | 2 --
 arch/x86/kernel/genapic_flat_64.c             | 6 ------
 arch/x86/kernel/genx2apic_cluster.c           | 3 ---
 arch/x86/kernel/genx2apic_phys.c              | 3 ---
 arch/x86/kernel/genx2apic_uv_x.c              | 3 ---
 arch/x86/mach-generic/bigsmp.c                | 3 ---
 arch/x86/mach-generic/default.c               | 3 ---
 arch/x86/mach-generic/es7000.c                | 4 ----
 arch/x86/mach-generic/numaq.c                 | 3 ---
 arch/x86/mach-generic/summit.c                | 3 ---
 16 files changed, 44 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index bd52d4d86f0..916451252b3 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -18,7 +18,6 @@ static inline const cpumask_t *bigsmp_target_cpus(void)
 }
 
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define NO_BALANCE_IRQ		(0)
 
 static inline unsigned long
 bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index cd888daa193..847008a7702 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -23,10 +23,8 @@ static inline const cpumask_t *es7000_target_cpus(void)
 #define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
 #define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
 #define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
-#define NO_BALANCE_IRQ_CLUSTER		(1)
 
 #define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-#define NO_BALANCE_IRQ		(0)
 
 static inline unsigned long
 es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index f9d1ec018fd..661898c2229 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -34,9 +34,6 @@ struct genapic {
 	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
 	unsigned long (*check_apicid_present)(int apicid);
 
-	int no_balance_irq;
-	int no_ioapic_check;
-
 	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
 	void (*init_apic_ldr)(void);
 
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 064bc11a991..8adccf8ee47 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -17,8 +17,6 @@ static inline const struct cpumask *default_target_cpus(void)
 #endif
 } 
 
-#define NO_BALANCE_IRQ (0)
-
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
 #define init_apic_ldr (apic->init_apic_ldr)
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index e035f88dfcd..4cb9e2b99e3 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define NO_BALANCE_IRQ (apic->no_balance_irq)
 #define init_apic_ldr (apic->init_apic_ldr)
 #define ioapic_phys_id_map (apic->ioapic_phys_id_map)
 #define setup_apic_routing (apic->setup_apic_routing)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 571fdaeafaa..defee3496ad 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -12,8 +12,6 @@ static inline const cpumask_t *numaq_target_cpus(void)
 	return &CPU_MASK_ALL;
 }
 
-#define NO_BALANCE_IRQ (1)
-
 static inline unsigned long
 numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 482038b244b..51df002ecf4 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -4,8 +4,6 @@
 #include <asm/smp.h>
 #include <linux/gfp.h>
 
-#define NO_BALANCE_IRQ (0)
-
 /* In clustered mode, the high nibble of APIC ID is a cluster number.
  * The low nibble is a 4-bit bitmap. */
 #define XAPIC_DEST_CPUS_SHIFT	4
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index d22cbdaee20..9446f372a16 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -189,9 +189,6 @@ struct genapic apic_flat =  {
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
-	.no_balance_irq			= 0,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= flat_vector_allocation_domain,
 	.init_apic_ldr			= flat_init_apic_ldr,
 
@@ -335,9 +332,6 @@ struct genapic apic_physflat =  {
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
-	.no_balance_irq			= 0,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= physflat_vector_allocation_domain,
 	/* not needed, but shouldn't hurt: */
 	.init_apic_ldr			= flat_init_apic_ldr,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index b91a48eae52..2eeca6e744a 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -191,9 +191,6 @@ struct genapic apic_x2apic_cluster = {
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
-	.no_balance_irq			= 0,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= x2apic_vector_allocation_domain,
 	.init_apic_ldr			= init_x2apic_ldr,
 
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index f070e86af0f..be0ee3e56ef 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -187,9 +187,6 @@ struct genapic apic_x2apic_phys = {
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
-	.no_balance_irq			= 0,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= x2apic_vector_allocation_domain,
 	.init_apic_ldr			= init_x2apic_ldr,
 
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index c8a89158679..68b423f3da9 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -252,9 +252,6 @@ struct genapic apic_x2apic_uv_x = {
 	.check_apicid_used		= NULL,
 	.check_apicid_present		= NULL,
 
-	.no_balance_irq			= 0,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= uv_vector_allocation_domain,
 	.init_apic_ldr			= uv_init_apic_ldr,
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index aa8443f6c0f..6da251aa9f4 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -74,9 +74,6 @@ struct genapic apic_bigsmp = {
 	.check_apicid_used		= bigsmp_check_apicid_used,
 	.check_apicid_present		= bigsmp_check_apicid_present,
 
-	.no_balance_irq			= NO_BALANCE_IRQ,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 47f6b5b06ba..e89e8c9dd68 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -41,9 +41,6 @@ struct genapic apic_default = {
 	.check_apicid_used		= default_check_apicid_used,
 	.check_apicid_present		= default_check_apicid_present,
 
-	.no_balance_irq			= NO_BALANCE_IRQ,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 5633f3296e1..8e9eeecf7e2 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -23,7 +23,6 @@ void __init es7000_update_genapic_to_cluster(void)
 	apic->target_cpus = target_cpus_cluster;
 	apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
 	apic->irq_dest_mode = INT_DEST_MODE_CLUSTER;
-	apic->no_balance_irq = NO_BALANCE_IRQ_CLUSTER;
 
 	apic->init_apic_ldr = init_apic_ldr_cluster;
 
@@ -117,9 +116,6 @@ struct genapic apic_es7000 = {
 	.check_apicid_used		= es7000_check_apicid_used,
 	.check_apicid_present		= es7000_check_apicid_present,
 
-	.no_balance_irq			= NO_BALANCE_IRQ,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index d85206d8e4a..f909189fee3 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -61,9 +61,6 @@ struct genapic apic_numaq = {
 	.check_apicid_used		= numaq_check_apicid_used,
 	.check_apicid_present		= numaq_check_apicid_present,
 
-	.no_balance_irq			= NO_BALANCE_IRQ,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index f54cf73d3ed..99a9bea8d14 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -54,9 +54,6 @@ struct genapic apic_summit = {
 	.check_apicid_used		= summit_check_apicid_used,
 	.check_apicid_present		= summit_check_apicid_present,
 
-	.no_balance_irq			= NO_BALANCE_IRQ,
-	.no_ioapic_check		= 0,
-
 	.vector_allocation_domain	= vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
-- 
cgit v1.2.3


From e2d40b1878bd13ca1028ddd299c48e4821ac3535 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->vector_allocation_domain()

- separate the namespace

 - remove macros

 - move the default vector-allocation-domain to mach-generic

 - fix whitespace damage

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_apic.h | 13 -------------
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/kernel/io_apic.c                     |  2 +-
 arch/x86/mach-generic/bigsmp.c                |  4 ++--
 arch/x86/mach-generic/default.c               | 16 +++++++++++++++-
 arch/x86/mach-generic/es7000.c                |  4 ++--
 arch/x86/mach-generic/numaq.c                 |  4 ++--
 arch/x86/mach-generic/summit.c                |  4 ++--
 8 files changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 8adccf8ee47..9c56542644c 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -23,7 +23,6 @@ static inline const struct cpumask *default_target_cpus(void)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
 #define phys_pkg_id	(apic->phys_pkg_id)
-#define vector_allocation_domain    (apic->vector_allocation_domain)
 #define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
 #define send_IPI_self (apic->send_IPI_self)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
@@ -89,18 +88,6 @@ static inline int apicid_to_node(int logical_apicid)
 #endif
 }
 
-static inline void vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-        /* Careful. Some cpus do not strictly honor the set of cpus
-         * specified in the interrupt destination when using lowest
-         * priority interrupt delivery mode.
-         *
-         * In particular there was a hyperthreading cpu observed to
-         * deliver interrupts to the wrong hyperthread when only one
-         * hyperthread was specified in the interrupt desitination.
-         */
-	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
-}
 #endif
 
 static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 4cb9e2b99e3..e94881af962 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -15,7 +15,6 @@
 #define check_phys_apicid_present (apic->check_phys_apicid_present)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
-#define vector_allocation_domain (apic->vector_allocation_domain)
 #define enable_apic_mode (apic->enable_apic_mode)
 #define phys_pkg_id (apic->phys_pkg_id)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 733ecf17272..49899e06624 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1316,7 +1316,7 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 		int new_cpu;
 		int vector, offset;
 
-		vector_allocation_domain(cpu, tmp_mask);
+		apic->vector_allocation_domain(cpu, tmp_mask);
 
 		vector = current_vector;
 		offset = current_offset;
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 6da251aa9f4..391cc99cd21 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -42,7 +42,7 @@ static const struct dmi_system_id bigsmp_dmi_table[] = {
 	 { }
 };
 
-static void vector_allocation_domain(int cpu, cpumask_t *retmask)
+static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
 {
 	cpus_clear(*retmask);
 	cpu_set(cpu, *retmask);
@@ -74,7 +74,7 @@ struct genapic apic_bigsmp = {
 	.check_apicid_used		= bigsmp_check_apicid_used,
 	.check_apicid_present		= bigsmp_check_apicid_present,
 
-	.vector_allocation_domain	= vector_allocation_domain,
+	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index e89e8c9dd68..6adc3c69a3c 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -18,6 +18,20 @@
 #include <asm/mach-default/mach_mpparse.h>
 #include <asm/mach-default/mach_wakecpu.h>
 
+static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	/*
+	 * Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
+}
+
 /* should be called last. */
 static int probe_default(void)
 {
@@ -41,7 +55,7 @@ struct genapic apic_default = {
 	.check_apicid_used		= default_check_apicid_used,
 	.check_apicid_present		= default_check_apicid_present,
 
-	.vector_allocation_domain	= vector_allocation_domain,
+	.vector_allocation_domain	= default_vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 8e9eeecf7e2..bc1f21cd6a4 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -86,7 +86,7 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 }
 #endif
 
-static void vector_allocation_domain(int cpu, cpumask_t *retmask)
+static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
 {
 	/* Careful. Some cpus do not strictly honor the set of cpus
 	 * specified in the interrupt destination when using lowest
@@ -116,7 +116,7 @@ struct genapic apic_es7000 = {
 	.check_apicid_used		= es7000_check_apicid_used,
 	.check_apicid_present		= es7000_check_apicid_present,
 
-	.vector_allocation_domain	= vector_allocation_domain,
+	.vector_allocation_domain	= es7000_vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index f909189fee3..712882f48c4 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -31,7 +31,7 @@ static int probe_numaq(void)
 	return found_numaq;
 }
 
-static void vector_allocation_domain(int cpu, cpumask_t *retmask)
+static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
 {
 	/* Careful. Some cpus do not strictly honor the set of cpus
 	 * specified in the interrupt destination when using lowest
@@ -61,7 +61,7 @@ struct genapic apic_numaq = {
 	.check_apicid_used		= numaq_check_apicid_used,
 	.check_apicid_present		= numaq_check_apicid_present,
 
-	.vector_allocation_domain	= vector_allocation_domain,
+	.vector_allocation_domain	= numaq_vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 99a9bea8d14..1834887b94a 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -24,7 +24,7 @@ static int probe_summit(void)
 	return 0;
 }
 
-static void vector_allocation_domain(int cpu, cpumask_t *retmask)
+static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
 {
 	/* Careful. Some cpus do not strictly honor the set of cpus
 	 * specified in the interrupt destination when using lowest
@@ -54,7 +54,7 @@ struct genapic apic_summit = {
 	.check_apicid_used		= summit_check_apicid_used,
 	.check_apicid_present		= summit_check_apicid_present,
 
-	.vector_allocation_domain	= vector_allocation_domain,
+	.vector_allocation_domain	= summit_vector_allocation_domain,
 	.init_apic_ldr			= init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
-- 
cgit v1.2.3


From a5c4329622a3437adef4b2a4288d127957743c97 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->init_apic_ldr()

- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 4 ++--
 arch/x86/include/asm/mach-default/mach_apic.h | 3 +--
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 2 +-
 arch/x86/kernel/apic.c                        | 2 +-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 4 ++--
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 12 files changed, 13 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 916451252b3..81941308299 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -46,7 +46,7 @@ static inline unsigned long calculate_ldr(int cpu)
  * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  * document number 292116).  So here it goes...
  */
-static inline void init_apic_ldr(void)
+static inline void bigsmp_init_apic_ldr(void)
 {
 	unsigned long val;
 	int cpu = smp_processor_id();
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 847008a7702..06f5757bf7a 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -52,7 +52,7 @@ static inline unsigned long calculate_ldr(int cpu)
  * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  * document number 292116).  So here it goes...
  */
-static inline void init_apic_ldr_cluster(void)
+static inline void es7000_init_apic_ldr_cluster(void)
 {
 	unsigned long val;
 	int cpu = smp_processor_id();
@@ -62,7 +62,7 @@ static inline void init_apic_ldr_cluster(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline void init_apic_ldr(void)
+static inline void es7000_init_apic_ldr(void)
 {
 	unsigned long val;
 	int cpu = smp_processor_id();
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 9c56542644c..23e0a2da3a9 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -19,7 +19,6 @@ static inline const struct cpumask *default_target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define init_apic_ldr (apic->init_apic_ldr)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
 #define phys_pkg_id	(apic->phys_pkg_id)
@@ -36,7 +35,7 @@ extern void setup_apic_routing(void);
  * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  * document number 292116).  So here it goes...
  */
-static inline void init_apic_ldr(void)
+static inline void default_init_apic_ldr(void)
 {
 	unsigned long val;
 
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index e94881af962..8e51f416394 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define init_apic_ldr (apic->init_apic_ldr)
 #define ioapic_phys_id_map (apic->ioapic_phys_id_map)
 #define setup_apic_routing (apic->setup_apic_routing)
 #define multi_timer_check (apic->multi_timer_check)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index defee3496ad..802297489a3 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -28,7 +28,7 @@ static inline int numaq_apic_id_registered(void)
 	return 1;
 }
 
-static inline void init_apic_ldr(void)
+static inline void numaq_init_apic_ldr(void)
 {
 	/* Already done in NUMA-Q firmware */
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 51df002ecf4..9108c89fe88 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -37,7 +37,7 @@ static inline unsigned long summit_check_apicid_present(int bit)
 
 extern u8 cpu_2_logical_apicid[];
 
-static inline void init_apic_ldr(void)
+static inline void summit_init_apic_ldr(void)
 {
 	unsigned long val, id;
 	int count = 0;
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 3853ed76c88..b7077936ac0 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1179,7 +1179,7 @@ void __cpuinit setup_local_APIC(void)
 	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
 	 * document number 292116).  So here it goes...
 	 */
-	init_apic_ldr();
+	apic->init_apic_ldr();
 
 	/*
 	 * Set Task Priority to 'accept all'. We never change this
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 391cc99cd21..7b7fc471a3f 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -75,7 +75,7 @@ struct genapic apic_bigsmp = {
 	.check_apicid_present		= bigsmp_check_apicid_present,
 
 	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
-	.init_apic_ldr			= init_apic_ldr,
+	.init_apic_ldr			= bigsmp_init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 6adc3c69a3c..633e8482af2 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -56,7 +56,7 @@ struct genapic apic_default = {
 	.check_apicid_present		= default_check_apicid_present,
 
 	.vector_allocation_domain	= default_vector_allocation_domain,
-	.init_apic_ldr			= init_apic_ldr,
+	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index bc1f21cd6a4..b70833e3597 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -24,7 +24,7 @@ void __init es7000_update_genapic_to_cluster(void)
 	apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
 	apic->irq_dest_mode = INT_DEST_MODE_CLUSTER;
 
-	apic->init_apic_ldr = init_apic_ldr_cluster;
+	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
 
 	apic->cpu_mask_to_apicid = cpu_mask_to_apicid_cluster;
 }
@@ -117,7 +117,7 @@ struct genapic apic_es7000 = {
 	.check_apicid_present		= es7000_check_apicid_present,
 
 	.vector_allocation_domain	= es7000_vector_allocation_domain,
-	.init_apic_ldr			= init_apic_ldr,
+	.init_apic_ldr			= es7000_init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 712882f48c4..a06fda57928 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -62,7 +62,7 @@ struct genapic apic_numaq = {
 	.check_apicid_present		= numaq_check_apicid_present,
 
 	.vector_allocation_domain	= numaq_vector_allocation_domain,
-	.init_apic_ldr			= init_apic_ldr,
+	.init_apic_ldr			= numaq_init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 1834887b94a..36c552fa427 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -55,7 +55,7 @@ struct genapic apic_summit = {
 	.check_apicid_present		= summit_check_apicid_present,
 
 	.vector_allocation_domain	= summit_vector_allocation_domain,
-	.init_apic_ldr			= init_apic_ldr,
+	.init_apic_ldr			= summit_init_apic_ldr,
 
 	.ioapic_phys_id_map		= ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
-- 
cgit v1.2.3


From d190cb87c4503014353f2310c4bfa2268fa7111d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->ioapic_phys_id_map()

- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 2 +-
 arch/x86/include/asm/mach-default/mach_apic.h | 2 +-
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 3 ++-
 arch/x86/kernel/io_apic.c                     | 4 ++--
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 12 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 81941308299..05116d5487d 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -94,7 +94,7 @@ static inline int cpu_to_logical_apicid(int cpu)
 	return cpu_physical_id(cpu);
 }
 
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
 	return physids_promote(0xFFL);
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 06f5757bf7a..db3e652f0f7 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -125,7 +125,7 @@ static inline int cpu_to_logical_apicid(int cpu)
 #endif
 }
 
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+static inline physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
 	return physids_promote(0xff);
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 23e0a2da3a9..7abdaae06f2 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -99,7 +99,7 @@ static inline unsigned long default_check_apicid_present(int bit)
 	return physid_isset(bit, phys_cpu_present_map);
 }
 
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
 {
 	return phys_map;
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 8e51f416394..c1c96e6bb18 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define ioapic_phys_id_map (apic->ioapic_phys_id_map)
 #define setup_apic_routing (apic->setup_apic_routing)
 #define multi_timer_check (apic->multi_timer_check)
 #define apicid_to_node (apic->apicid_to_node)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 802297489a3..dc7499b9262 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -48,7 +48,7 @@ static inline int multi_timer_check(int apic, int irq)
 	return apic != 0 && irq == 0;
 }
 
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
 {
 	/* We don't have a good way to do this yet - hack */
 	return physids_promote(0xFUL);
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 9108c89fe88..4dafb58f930 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -109,7 +109,8 @@ static inline int cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
+static inline physid_mask_t
+ summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
 	return physids_promote(0x0F);
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 49899e06624..db79ad9a764 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -2108,7 +2108,7 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	 * This is broken; anything with a real cpu count has to
 	 * circumvent this idiocy regardless.
 	 */
-	phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
+	phys_id_present_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
 
 	/*
 	 * Set the IOAPIC ID to the value stored in the MPC table.
@@ -3862,7 +3862,7 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 	 */
 
 	if (physids_empty(apic_id_map))
-		apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
+		apic_id_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(ioapic, 0);
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 7b7fc471a3f..f2a3418d0cc 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -77,7 +77,7 @@ struct genapic apic_bigsmp = {
 	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
 	.init_apic_ldr			= bigsmp_init_apic_ldr,
 
-	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 633e8482af2..c403f3d9300 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -58,7 +58,7 @@ struct genapic apic_default = {
 	.vector_allocation_domain	= default_vector_allocation_domain,
 	.init_apic_ldr			= default_init_apic_ldr,
 
-	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index b70833e3597..ce09baf0872 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -119,7 +119,7 @@ struct genapic apic_es7000 = {
 	.vector_allocation_domain	= es7000_vector_allocation_domain,
 	.init_apic_ldr			= es7000_init_apic_ldr,
 
-	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index a06fda57928..5d98f18a0bd 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -64,7 +64,7 @@ struct genapic apic_numaq = {
 	.vector_allocation_domain	= numaq_vector_allocation_domain,
 	.init_apic_ldr			= numaq_init_apic_ldr,
 
-	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 36c552fa427..6abdd53a01c 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -57,7 +57,7 @@ struct genapic apic_summit = {
 	.vector_allocation_domain	= summit_vector_allocation_domain,
 	.init_apic_ldr			= summit_init_apic_ldr,
 
-	.ioapic_phys_id_map		= ioapic_phys_id_map,
+	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
-- 
cgit v1.2.3


From 72ce016583916fb7ffcbaa6a3e1f8f731b79a865 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->setup_apic_routing()

- separate the namespace

 - remove macros

 - remove namespace clash on 64-bit

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 2 +-
 arch/x86/include/asm/genapic.h                | 2 +-
 arch/x86/include/asm/mach-default/mach_apic.h | 4 ++--
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 2 +-
 arch/x86/kernel/acpi/boot.c                   | 5 ++---
 arch/x86/kernel/apic.c                        | 2 +-
 arch/x86/kernel/genapic_64.c                  | 2 +-
 arch/x86/kernel/mpparse.c                     | 6 +++---
 arch/x86/kernel/smpboot.c                     | 2 +-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 17 files changed, 20 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 05116d5487d..321ea47b5dd 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -56,7 +56,7 @@ static inline void bigsmp_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline void setup_apic_routing(void)
+static inline void bigsmp_setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
 		"Physflat", nr_ioapics);
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index db3e652f0f7..f1183000a94 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -73,7 +73,7 @@ static inline void es7000_init_apic_ldr(void)
 }
 
 extern int apic_version [MAX_APICS];
-static inline void setup_apic_routing(void)
+static inline void es7000_setup_apic_routing(void)
 {
 	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
 	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 661898c2229..38b1202316f 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -107,7 +107,7 @@ extern void apic_send_IPI_self(int vector);
 extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
-extern void setup_apic_routing(void);
+extern void default_setup_apic_routing(void);
 #endif
 
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 7abdaae06f2..d4467746304 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -25,7 +25,7 @@ static inline const struct cpumask *default_target_cpus(void)
 #define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
 #define send_IPI_self (apic->send_IPI_self)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
-extern void setup_apic_routing(void);
+extern void default_setup_apic_routing(void);
 #else
 #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
@@ -70,7 +70,7 @@ static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-static inline void setup_apic_routing(void)
+static inline void default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index c1c96e6bb18..ddf369248ab 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define setup_apic_routing (apic->setup_apic_routing)
 #define multi_timer_check (apic->multi_timer_check)
 #define apicid_to_node (apic->apicid_to_node)
 #define cpu_to_logical_apicid (apic->cpu_to_logical_apicid) 
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index dc7499b9262..2feb7e72e9e 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -33,7 +33,7 @@ static inline void numaq_init_apic_ldr(void)
 	/* Already done in NUMA-Q firmware */
 }
 
-static inline void setup_apic_routing(void)
+static inline void numaq_setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
 		"NUMA-Q", nr_ioapics);
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 4dafb58f930..7ec2696bc9a 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -74,7 +74,7 @@ static inline int summit_apic_id_registered(void)
 	return 1;
 }
 
-static inline void setup_apic_routing(void)
+static inline void summit_setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
 						nr_ioapics);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 314fe0dddef..539163161a4 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1360,9 +1360,8 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
-#ifdef CONFIG_X86_32
-				setup_apic_routing();
-#endif
+				if (apic->setup_apic_routing)
+					apic->setup_apic_routing();
 			}
 		}
 		if (error == -EINVAL) {
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index b7077936ac0..fcbcc03cd4b 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1625,7 +1625,7 @@ int __init APIC_init_uniprocessor(void)
 	enable_IR_x2apic();
 #endif
 #ifdef CONFIG_X86_64
-	setup_apic_routing();
+	default_setup_apic_routing();
 #endif
 
 	verify_local_APIC();
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 060945b8eec..d57d2138f07 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -44,7 +44,7 @@ static struct genapic *apic_probe[] __initdata = {
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
-void __init setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
 {
 	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
 		if (!intr_remapping_enabled)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index fa6bb263892..c8a534a16d9 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -390,9 +390,9 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
        generic_bigsmp_probe();
 #endif
 
-#ifdef CONFIG_X86_32
-	setup_apic_routing();
-#endif
+	if (apic->setup_apic_routing)
+		apic->setup_apic_routing();
+
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 45c096f605f..3791b4ae567 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1128,7 +1128,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 #ifdef CONFIG_X86_64
 	enable_IR_x2apic();
-	setup_apic_routing();
+	default_setup_apic_routing();
 #endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index f2a3418d0cc..ad3837a59bd 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -78,7 +78,7 @@ struct genapic apic_bigsmp = {
 	.init_apic_ldr			= bigsmp_init_apic_ldr,
 
 	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
-	.setup_apic_routing		= setup_apic_routing,
+	.setup_apic_routing		= bigsmp_setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index c403f3d9300..67f287fc12d 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -59,7 +59,7 @@ struct genapic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= setup_apic_routing,
+	.setup_apic_routing		= default_setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index ce09baf0872..f6117293946 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -120,7 +120,7 @@ struct genapic apic_es7000 = {
 	.init_apic_ldr			= es7000_init_apic_ldr,
 
 	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
-	.setup_apic_routing		= setup_apic_routing,
+	.setup_apic_routing		= es7000_setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 5d98f18a0bd..8c137f41348 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -65,7 +65,7 @@ struct genapic apic_numaq = {
 	.init_apic_ldr			= numaq_init_apic_ldr,
 
 	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
-	.setup_apic_routing		= setup_apic_routing,
+	.setup_apic_routing		= numaq_setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 6abdd53a01c..0698566dc7b 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -58,7 +58,7 @@ struct genapic apic_summit = {
 	.init_apic_ldr			= summit_init_apic_ldr,
 
 	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
-	.setup_apic_routing		= setup_apic_routing,
+	.setup_apic_routing		= summit_setup_apic_routing,
 	.multi_timer_check		= multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
-- 
cgit v1.2.3


From 33a201fac698a93d9d1ffa77030ba2ff38d1a3d1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 07:17:26 +0100
Subject: x86, apic: streamline the ->multi_timer_check() quirk

only NUMAQ uses this quirk: to prevent the timer IRQ from being added
on secondary nodes.

All other genapic templates can have a NULL ->multi_timer_check()
callback.

Also, extend the generic code to treat a NULL pointer accordingly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  5 -----
 arch/x86/include/asm/es7000/apic.h            |  5 -----
 arch/x86/include/asm/mach-default/mach_apic.h |  5 -----
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/include/asm/numaq/apic.h             |  2 +-
 arch/x86/include/asm/summit/apic.h            |  5 -----
 arch/x86/kernel/io_apic.c                     | 11 ++++++++---
 arch/x86/mach-generic/bigsmp.c                |  2 +-
 arch/x86/mach-generic/default.c               |  2 +-
 arch/x86/mach-generic/es7000.c                |  2 +-
 arch/x86/mach-generic/numaq.c                 |  2 +-
 arch/x86/mach-generic/summit.c                |  2 +-
 12 files changed, 14 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 321ea47b5dd..df59298086c 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -62,11 +62,6 @@ static inline void bigsmp_setup_apic_routing(void)
 		"Physflat", nr_ioapics);
 }
 
-static inline int multi_timer_check(int apic, int irq)
-{
-	return (0);
-}
-
 static inline int apicid_to_node(int logical_apicid)
 {
 	return apicid_2_node[hard_smp_processor_id()];
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index f1183000a94..632e4cd3f4f 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -82,11 +82,6 @@ static inline void es7000_setup_apic_routing(void)
 			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
 }
 
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
 static inline int apicid_to_node(int logical_apicid)
 {
 	return 0;
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index d4467746304..f418d470cf4 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -104,11 +104,6 @@ static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
 	return phys_map;
 }
 
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
 /* Mapping from cpu number to logical apicid */
 static inline int cpu_to_logical_apicid(int cpu)
 {
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index ddf369248ab..bdea0a759e8 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define multi_timer_check (apic->multi_timer_check)
 #define apicid_to_node (apic->apicid_to_node)
 #define cpu_to_logical_apicid (apic->cpu_to_logical_apicid) 
 #define cpu_present_to_apicid (apic->cpu_present_to_apicid)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 2feb7e72e9e..22bdf3d4c0e 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -43,7 +43,7 @@ static inline void numaq_setup_apic_routing(void)
  * Skip adding the timer int on secondary nodes, which causes
  * a small but painful rift in the time-space continuum.
  */
-static inline int multi_timer_check(int apic, int irq)
+static inline int numaq_multi_timer_check(int apic, int irq)
 {
 	return apic != 0 && irq == 0;
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 7ec2696bc9a..acb7bd1de84 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -64,11 +64,6 @@ static inline void summit_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
 static inline int summit_apic_id_registered(void)
 {
 	return 1;
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index db79ad9a764..282ea112f3c 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1618,10 +1618,15 @@ static void __init setup_IO_APIC_irqs(void)
 			}
 
 			irq = pin_2_irq(idx, apic_id, pin);
-#ifdef CONFIG_X86_32
-			if (multi_timer_check(apic_id, irq))
+
+			/*
+			 * Skip the timer IRQ if there's a quirk handler
+			 * installed and if it returns 1:
+			 */
+			if (apic->multi_timer_check &&
+					apic->multi_timer_check(apic_id, irq))
 				continue;
-#endif
+
 			desc = irq_to_desc_alloc_cpu(irq, cpu);
 			if (!desc) {
 				printk(KERN_INFO "can not get irq_desc for %d\n", irq);
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index ad3837a59bd..d0749569cdf 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -79,7 +79,7 @@ struct genapic apic_bigsmp = {
 
 	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
 	.setup_apic_routing		= bigsmp_setup_apic_routing,
-	.multi_timer_check		= multi_timer_check,
+	.multi_timer_check		= NULL,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 67f287fc12d..6a21aa7c0c6 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -60,7 +60,7 @@ struct genapic apic_default = {
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
 	.setup_apic_routing		= default_setup_apic_routing,
-	.multi_timer_check		= multi_timer_check,
+	.multi_timer_check		= NULL,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index f6117293946..0be59a51df2 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -121,7 +121,7 @@ struct genapic apic_es7000 = {
 
 	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
 	.setup_apic_routing		= es7000_setup_apic_routing,
-	.multi_timer_check		= multi_timer_check,
+	.multi_timer_check		= NULL,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 8c137f41348..da4ed653506 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -66,7 +66,7 @@ struct genapic apic_numaq = {
 
 	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
 	.setup_apic_routing		= numaq_setup_apic_routing,
-	.multi_timer_check		= multi_timer_check,
+	.multi_timer_check		= numaq_multi_timer_check,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 0698566dc7b..b618a186f1e 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -59,7 +59,7 @@ struct genapic apic_summit = {
 
 	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
 	.setup_apic_routing		= summit_setup_apic_routing,
-	.multi_timer_check		= multi_timer_check,
+	.multi_timer_check		= NULL,
 	.apicid_to_node			= apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
-- 
cgit v1.2.3


From 3f57a318c36e1f24070a18df8c4971ca08d33142 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->apicid_to_node()

- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 2 +-
 arch/x86/include/asm/mach-default/mach_apic.h | 2 +-
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 4 ++--
 arch/x86/include/asm/summit/apic.h            | 2 +-
 arch/x86/kernel/smpboot.c                     | 2 +-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 12 files changed, 12 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index df59298086c..77f0b734875 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -62,7 +62,7 @@ static inline void bigsmp_setup_apic_routing(void)
 		"Physflat", nr_ioapics);
 }
 
-static inline int apicid_to_node(int logical_apicid)
+static inline int bigsmp_apicid_to_node(int logical_apicid)
 {
 	return apicid_2_node[hard_smp_processor_id()];
 }
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 632e4cd3f4f..bcdf31400df 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -82,7 +82,7 @@ static inline void es7000_setup_apic_routing(void)
 			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
 }
 
-static inline int apicid_to_node(int logical_apicid)
+static inline int es7000_apicid_to_node(int logical_apicid)
 {
 	return 0;
 }
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index f418d470cf4..2f78209d972 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -78,7 +78,7 @@ static inline void default_setup_apic_routing(void)
 #endif
 }
 
-static inline int apicid_to_node(int logical_apicid)
+static inline int default_apicid_to_node(int logical_apicid)
 {
 #ifdef CONFIG_SMP
 	return apicid_2_node[hard_smp_processor_id()];
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index bdea0a759e8..b585a8e5f81 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define apicid_to_node (apic->apicid_to_node)
 #define cpu_to_logical_apicid (apic->cpu_to_logical_apicid) 
 #define cpu_present_to_apicid (apic->cpu_present_to_apicid)
 #define apicid_to_cpu_present (apic->apicid_to_cpu_present)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 22bdf3d4c0e..a0e3b437118 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -76,14 +76,14 @@ static inline int cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static inline int apicid_to_node(int logical_apicid) 
+static inline int numaq_apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;
 }
 
 static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
 {
-	int node = apicid_to_node(logical_apicid);
+	int node = numaq_apicid_to_node(logical_apicid);
 	int cpu = __ffs(logical_apicid & 0xf);
 
 	return physid_mask_of_physid(cpu + 4*node);
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index acb7bd1de84..cfff2760e60 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -75,7 +75,7 @@ static inline void summit_setup_apic_routing(void)
 						nr_ioapics);
 }
 
-static inline int apicid_to_node(int logical_apicid)
+static inline int summit_apicid_to_node(int logical_apicid)
 {
 #ifdef CONFIG_SMP
 	return apicid_2_node[hard_smp_processor_id()];
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3791b4ae567..1dd4cecd4bc 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -163,7 +163,7 @@ static void map_cpu_to_logical_apicid(void)
 {
 	int cpu = smp_processor_id();
 	int apicid = logical_smp_processor_id();
-	int node = apicid_to_node(apicid);
+	int node = apic->apicid_to_node(apicid);
 
 	if (!node_online(node))
 		node = first_online_node;
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index d0749569cdf..2f4121499e5 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -80,7 +80,7 @@ struct genapic apic_bigsmp = {
 	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
 	.setup_apic_routing		= bigsmp_setup_apic_routing,
 	.multi_timer_check		= NULL,
-	.apicid_to_node			= apicid_to_node,
+	.apicid_to_node			= bigsmp_apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 6a21aa7c0c6..d391c2dc819 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -61,7 +61,7 @@ struct genapic apic_default = {
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
 	.setup_apic_routing		= default_setup_apic_routing,
 	.multi_timer_check		= NULL,
-	.apicid_to_node			= apicid_to_node,
+	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 0be59a51df2..933f2a38599 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -122,7 +122,7 @@ struct genapic apic_es7000 = {
 	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
 	.setup_apic_routing		= es7000_setup_apic_routing,
 	.multi_timer_check		= NULL,
-	.apicid_to_node			= apicid_to_node,
+	.apicid_to_node			= es7000_apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index da4ed653506..38344fb9979 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -67,7 +67,7 @@ struct genapic apic_numaq = {
 	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
 	.setup_apic_routing		= numaq_setup_apic_routing,
 	.multi_timer_check		= numaq_multi_timer_check,
-	.apicid_to_node			= apicid_to_node,
+	.apicid_to_node			= numaq_apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index b618a186f1e..6150604deaa 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -60,7 +60,7 @@ struct genapic apic_summit = {
 	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
 	.setup_apic_routing		= summit_setup_apic_routing,
 	.multi_timer_check		= NULL,
-	.apicid_to_node			= apicid_to_node,
+	.apicid_to_node			= summit_apicid_to_node,
 	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
-- 
cgit v1.2.3


From 5257c5111ca21c8e857b65a79ab986b313e1c362 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->cpu_to_logical_apicid()

- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  6 +++---
 arch/x86/include/asm/es7000/apic.h            | 16 ++++++++--------
 arch/x86/include/asm/mach-default/mach_apic.h |  2 +-
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/include/asm/numaq/apic.h             |  3 ++-
 arch/x86/include/asm/summit/apic.h            |  8 ++++----
 arch/x86/kernel/ipi.c                         |  4 ++--
 arch/x86/mach-generic/bigsmp.c                |  2 +-
 arch/x86/mach-generic/default.c               |  2 +-
 arch/x86/mach-generic/es7000.c                |  2 +-
 arch/x86/mach-generic/numaq.c                 |  2 +-
 arch/x86/mach-generic/summit.c                |  2 +-
 12 files changed, 25 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 77f0b734875..d0d894ff7d3 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -82,7 +82,7 @@ static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
 
 extern u8 cpu_2_logical_apicid[];
 /* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
+static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 {
 	if (cpu >= nr_cpu_ids)
 		return BAD_APICID;
@@ -115,7 +115,7 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 	int apicid;	
 
 	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
+	apicid = bigsmp_cpu_to_logical_apicid(cpu);
 	return apicid;
 }
 
@@ -132,7 +132,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
 	if (cpu < nr_cpu_ids)
-		return cpu_to_logical_apicid(cpu);
+		return bigsmp_cpu_to_logical_apicid(cpu);
 
 	return BAD_APICID;
 }
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index bcdf31400df..e0cd07e74f9 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -109,7 +109,7 @@ static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
 
 extern u8 cpu_2_logical_apicid[];
 /* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
+static inline int es7000_cpu_to_logical_apicid(int cpu)
 {
 #ifdef CONFIG_SMP
 	if (cpu >= nr_cpu_ids)
@@ -155,10 +155,10 @@ cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = cpumask_first(cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
 	while (cpus_found < num_bits_set) {
 		if (cpumask_test_cpu(cpu, cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 			if (apicid_cluster(apicid) !=
 					apicid_cluster(new_apicid)){
 				printk ("%s: Not a valid mask!\n", __func__);
@@ -182,20 +182,20 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 	num_bits_set = cpus_weight(*cpumask);
 	/* Return id to all */
 	if (num_bits_set == nr_cpu_ids)
-		return cpu_to_logical_apicid(0);
+		return es7000_cpu_to_logical_apicid(0);
 	/*
 	 * The cpus in the mask must all be on the apic cluster.  If are not
 	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
 	while (cpus_found < num_bits_set) {
 		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 			if (apicid_cluster(apicid) !=
 					apicid_cluster(new_apicid)){
 				printk ("%s: Not a valid mask!\n", __func__);
-				return cpu_to_logical_apicid(0);
+				return es7000_cpu_to_logical_apicid(0);
 			}
 			apicid = new_apicid;
 			cpus_found++;
@@ -209,7 +209,7 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 						  const struct cpumask *andmask)
 {
-	int apicid = cpu_to_logical_apicid(0);
+	int apicid = es7000_cpu_to_logical_apicid(0);
 	cpumask_var_t cpumask;
 
 	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 2f78209d972..eae3e4b6ed0 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -105,7 +105,7 @@ static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
 }
 
 /* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
+static inline int default_cpu_to_logical_apicid(int cpu)
 {
 	return 1 << cpu;
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index b585a8e5f81..2ea913e8e0d 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define cpu_to_logical_apicid (apic->cpu_to_logical_apicid) 
 #define cpu_present_to_apicid (apic->cpu_present_to_apicid)
 #define apicid_to_cpu_present (apic->apicid_to_cpu_present)
 #define setup_portio_remap (apic->setup_portio_remap)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index a0e3b437118..6989abd3485 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -56,7 +56,8 @@ static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
 
 /* Mapping from cpu number to logical apicid */
 extern u8 cpu_2_logical_apicid[];
-static inline int cpu_to_logical_apicid(int cpu)
+
+static inline int numaq_cpu_to_logical_apicid(int cpu)
 {
 	if (cpu >= nr_cpu_ids)
 		return BAD_APICID;
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index cfff2760e60..d564d7ee3f6 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -85,7 +85,7 @@ static inline int summit_apicid_to_node(int logical_apicid)
 }
 
 /* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
+static inline int summit_cpu_to_logical_apicid(int cpu)
 {
 #ifdef CONFIG_SMP
 	if (cpu >= nr_cpu_ids)
@@ -145,10 +145,10 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
+	apicid = summit_cpu_to_logical_apicid(cpu);
 	while (cpus_found < num_bits_set) {
 		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
+			int new_apicid = summit_cpu_to_logical_apicid(cpu);
 			if (apicid_cluster(apicid) !=
 					apicid_cluster(new_apicid)){
 				printk ("%s: Not a valid mask!\n", __func__);
@@ -165,7 +165,7 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 						  const struct cpumask *andmask)
 {
-	int apicid = cpu_to_logical_apicid(0);
+	int apicid = summit_cpu_to_logical_apicid(0);
 	cpumask_var_t cpumask;
 
 	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index e2e4895ca69..367c5e684fa 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -140,7 +140,7 @@ void send_IPI_mask_sequence(const struct cpumask *mask, int vector)
 
 	local_irq_save(flags);
 	for_each_cpu(query_cpu, mask)
-		__send_IPI_dest_field(cpu_to_logical_apicid(query_cpu), vector);
+		__send_IPI_dest_field(apic->cpu_to_logical_apicid(query_cpu), vector);
 	local_irq_restore(flags);
 }
 
@@ -155,7 +155,7 @@ void send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 	local_irq_save(flags);
 	for_each_cpu(query_cpu, mask)
 		if (query_cpu != this_cpu)
-			__send_IPI_dest_field(cpu_to_logical_apicid(query_cpu),
+			__send_IPI_dest_field(apic->cpu_to_logical_apicid(query_cpu),
 					      vector);
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 2f4121499e5..cd6f02ba88e 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -81,7 +81,7 @@ struct genapic apic_bigsmp = {
 	.setup_apic_routing		= bigsmp_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= bigsmp_apicid_to_node,
-	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index d391c2dc819..ef9b936c41a 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -62,7 +62,7 @@ struct genapic apic_default = {
 	.setup_apic_routing		= default_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
-	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 933f2a38599..74bf2b6b751 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -123,7 +123,7 @@ struct genapic apic_es7000 = {
 	.setup_apic_routing		= es7000_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= es7000_apicid_to_node,
-	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 38344fb9979..461f5beedb2 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -68,7 +68,7 @@ struct genapic apic_numaq = {
 	.setup_apic_routing		= numaq_setup_apic_routing,
 	.multi_timer_check		= numaq_multi_timer_check,
 	.apicid_to_node			= numaq_apicid_to_node,
-	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 6150604deaa..d99be2d4efc 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -61,7 +61,7 @@ struct genapic apic_summit = {
 	.setup_apic_routing		= summit_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= summit_apicid_to_node,
-	.cpu_to_logical_apicid		= cpu_to_logical_apicid,
+	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
-- 
cgit v1.2.3


From a21769a4461801454930a06bc18bd8249cd9e993 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->cpu_present_to_apicid()

- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  2 +-
 arch/x86/include/asm/es7000/apic.h            |  2 +-
 arch/x86/include/asm/genapic.h                |  2 ++
 arch/x86/include/asm/mach-default/mach_apic.h | 11 ++++++++++-
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/include/asm/numaq/apic.h             |  2 +-
 arch/x86/include/asm/summit/apic.h            |  2 +-
 arch/x86/kernel/genapic_flat_64.c             |  4 ++--
 arch/x86/kernel/genx2apic_cluster.c           |  2 +-
 arch/x86/kernel/genx2apic_phys.c              |  2 +-
 arch/x86/kernel/genx2apic_uv_x.c              |  2 +-
 arch/x86/kernel/smpboot.c                     |  9 ++++++++-
 arch/x86/mach-generic/bigsmp.c                |  2 +-
 arch/x86/mach-generic/default.c               |  2 +-
 arch/x86/mach-generic/es7000.c                |  2 +-
 arch/x86/mach-generic/numaq.c                 |  2 +-
 arch/x86/mach-generic/summit.c                |  2 +-
 17 files changed, 34 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index d0d894ff7d3..eea5e9788dd 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -67,7 +67,7 @@ static inline int bigsmp_apicid_to_node(int logical_apicid)
 	return apicid_2_node[hard_smp_processor_id()];
 }
 
-static inline int cpu_present_to_apicid(int mps_cpu)
+static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < nr_cpu_ids)
 		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index e0cd07e74f9..7cdde3d9c5f 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -88,7 +88,7 @@ static inline int es7000_apicid_to_node(int logical_apicid)
 }
 
 
-static inline int cpu_present_to_apicid(int mps_cpu)
+static inline int es7000_cpu_present_to_apicid(int mps_cpu)
 {
 	if (!mps_cpu)
 		return boot_cpu_physical_apicid;
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 38b1202316f..2cb14d51e45 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -108,6 +108,8 @@ extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
 extern void default_setup_apic_routing(void);
+
+extern int default_cpu_present_to_apicid(int mps_cpu);
 #endif
 
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index eae3e4b6ed0..15d5627a9d6 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -110,7 +110,7 @@ static inline int default_cpu_to_logical_apicid(int cpu)
 	return 1 << cpu;
 }
 
-static inline int cpu_present_to_apicid(int mps_cpu)
+static inline int __default_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
 		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
@@ -118,6 +118,15 @@ static inline int cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
+#ifdef CONFIG_X86_32
+static inline int default_cpu_present_to_apicid(int mps_cpu)
+{
+	return __default_cpu_present_to_apicid(mps_cpu);
+}
+#else
+extern int default_cpu_present_to_apicid(int mps_cpu);
+#endif
+
 static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
 {
 	return physid_mask_of_physid(phys_apicid);
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 2ea913e8e0d..332fe93ab41 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define cpu_present_to_apicid (apic->cpu_present_to_apicid)
 #define apicid_to_cpu_present (apic->apicid_to_cpu_present)
 #define setup_portio_remap (apic->setup_portio_remap)
 #define check_phys_apicid_present (apic->check_phys_apicid_present)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 6989abd3485..f482b063447 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -69,7 +69,7 @@ static inline int numaq_cpu_to_logical_apicid(int cpu)
  * cpu to APIC ID relation to properly interact with the intelligent
  * mode of the cluster controller.
  */
-static inline int cpu_present_to_apicid(int mps_cpu)
+static inline int numaq_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < 60)
 		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index d564d7ee3f6..fc127369188 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -96,7 +96,7 @@ static inline int summit_cpu_to_logical_apicid(int cpu)
 #endif
 }
 
-static inline int cpu_present_to_apicid(int mps_cpu)
+static inline int summit_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < nr_cpu_ids)
 		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 9446f372a16..f4a2c1c0a1a 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -197,7 +197,7 @@ struct genapic apic_flat =  {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= NULL,
 	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= NULL,
@@ -341,7 +341,7 @@ struct genapic apic_physflat =  {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= NULL,
 	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= NULL,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 2eeca6e744a..710d612a964 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -199,7 +199,7 @@ struct genapic apic_x2apic_cluster = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= NULL,
 	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= NULL,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index be0ee3e56ef..49a449178c3 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -195,7 +195,7 @@ struct genapic apic_x2apic_phys = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= NULL,
 	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= NULL,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 68b423f3da9..a08a6359186 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -260,7 +260,7 @@ struct genapic apic_x2apic_uv_x = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= NULL,
 	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= NULL,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 1dd4cecd4bc..812bf39de35 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -903,9 +903,16 @@ do_rest:
 	return boot_error;
 }
 
+#ifdef CONFIG_X86_64
+int default_cpu_present_to_apicid(int mps_cpu)
+{
+	return __default_cpu_present_to_apicid(mps_cpu);
+}
+#endif
+
 int __cpuinit native_cpu_up(unsigned int cpu)
 {
-	int apicid = cpu_present_to_apicid(cpu);
+	int apicid = apic->cpu_present_to_apicid(cpu);
 	unsigned long flags;
 	int err;
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index cd6f02ba88e..1eaf18c801d 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -82,7 +82,7 @@ struct genapic apic_bigsmp = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= bigsmp_apicid_to_node,
 	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index ef9b936c41a..2903657f420 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -63,7 +63,7 @@ struct genapic apic_default = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 74bf2b6b751..5a3a8ab4f8a 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -124,7 +124,7 @@ struct genapic apic_es7000 = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= es7000_apicid_to_node,
 	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 461f5beedb2..d928cae211c 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -69,7 +69,7 @@ struct genapic apic_numaq = {
 	.multi_timer_check		= numaq_multi_timer_check,
 	.apicid_to_node			= numaq_apicid_to_node,
 	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index d99be2d4efc..e6bb34ee580 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -62,7 +62,7 @@ struct genapic apic_summit = {
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= summit_apicid_to_node,
 	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= cpu_present_to_apicid,
+	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
-- 
cgit v1.2.3


From 8058714a41afc4c983acb274b1adf7bd3cfe7f6e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 06:50:47 +0100
Subject: x86, apic: clean up ->apicid_to_cpu_present()

- separate the namespace

 - remove macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 2 +-
 arch/x86/include/asm/mach-default/mach_apic.h | 2 +-
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 4 ++--
 arch/x86/kernel/io_apic.c                     | 4 ++--
 arch/x86/kernel/visws_quirks.c                | 2 +-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 13 files changed, 14 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index eea5e9788dd..080457450b2 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -75,7 +75,7 @@ static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
 	return BAD_APICID;
 }
 
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
 {
 	return physid_mask_of_physid(phys_apicid);
 }
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 7cdde3d9c5f..a09e1133ced 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -98,7 +98,7 @@ static inline int es7000_cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+static inline physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
 {
 	static int id = 0;
 	physid_mask_t mask;
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 15d5627a9d6..22683e5b82b 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -127,7 +127,7 @@ static inline int default_cpu_present_to_apicid(int mps_cpu)
 extern int default_cpu_present_to_apicid(int mps_cpu);
 #endif
 
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
 {
 	return physid_mask_of_physid(phys_apicid);
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 332fe93ab41..997618f2eb5 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define apicid_to_cpu_present (apic->apicid_to_cpu_present)
 #define setup_portio_remap (apic->setup_portio_remap)
 #define check_phys_apicid_present (apic->check_phys_apicid_present)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index f482b063447..8ac000f9928 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -82,7 +82,7 @@ static inline int numaq_apicid_to_node(int logical_apicid)
 	return logical_apicid >> 4;
 }
 
-static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
+static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
 {
 	int node = numaq_apicid_to_node(logical_apicid);
 	int cpu = __ffs(logical_apicid & 0xf);
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index fc127369188..79c1a45f886 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -105,13 +105,13 @@ static inline int summit_cpu_present_to_apicid(int mps_cpu)
 }
 
 static inline physid_mask_t
- summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
 	return physids_promote(0x0F);
 }
 
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
+static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
 {
 	return physid_mask_of_physid(0);
 }
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 282ea112f3c..3d85d3d810b 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -2155,7 +2155,7 @@ static void __init setup_ioapic_ids_from_mpc(void)
 			mp_ioapics[apic_id].apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
+			tmp = apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
 					mp_ioapics[apic_id].apicid);
@@ -3899,7 +3899,7 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 		apic_id = i;
 	}
 
-	tmp = apicid_to_cpu_present(apic_id);
+	tmp = apic->apicid_to_cpu_present(apic_id);
 	physids_or(apic_id_map, apic_id_map, tmp);
 
 	if (reg_00.bits.ID != apic_id) {
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index d801d06af06..2ed5bdf15c9 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -200,7 +200,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 		return;
 	}
 
-	apic_cpus = apicid_to_cpu_present(m->apicid);
+	apic_cpus = apic->apicid_to_cpu_present(m->apicid);
 	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
 	/*
 	 * Validate version
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 1eaf18c801d..61396523074 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -83,7 +83,7 @@ struct genapic apic_bigsmp = {
 	.apicid_to_node			= bigsmp_apicid_to_node,
 	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 2903657f420..8fc704a3db7 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -64,7 +64,7 @@ struct genapic apic_default = {
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 5a3a8ab4f8a..1e0e1627455 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -125,7 +125,7 @@ struct genapic apic_es7000 = {
 	.apicid_to_node			= es7000_apicid_to_node,
 	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index d928cae211c..839b86b765a 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -70,7 +70,7 @@ struct genapic apic_numaq = {
 	.apicid_to_node			= numaq_apicid_to_node,
 	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index e6bb34ee580..b6e37607a52 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -63,7 +63,7 @@ struct genapic apic_summit = {
 	.apicid_to_node			= summit_apicid_to_node,
 	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= apicid_to_cpu_present,
+	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
 	.setup_portio_remap		= setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
-- 
cgit v1.2.3


From d83093b50416f4ca59d3a84b2ddc217748214d64 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 12:43:18 +0100
Subject: x86: refactor ->setup_portio_remap() subarch methods

Only NUMAQ has a real ->setup_portio_remap() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.

Also move the NUMAQ method from the header file into the
 apic driver .c file.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  2 +-
 arch/x86/include/asm/es7000/apic.h            |  4 ----
 arch/x86/include/asm/mach-default/mach_apic.h |  4 ----
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/include/asm/numaq/apic.h             | 13 -------------
 arch/x86/include/asm/summit/apic.h            |  2 +-
 arch/x86/kernel/smpboot.c                     |  3 ++-
 arch/x86/mach-generic/bigsmp.c                |  2 +-
 arch/x86/mach-generic/default.c               |  2 +-
 arch/x86/mach-generic/es7000.c                |  2 +-
 arch/x86/mach-generic/numaq.c                 | 15 ++++++++++++++-
 arch/x86/mach-generic/summit.c                |  2 +-
 12 files changed, 22 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 080457450b2..2fa70032e3b 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -95,7 +95,7 @@ static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
 	return physids_promote(0xFFL);
 }
 
-static inline void setup_portio_remap(void)
+static inline void bigsmp_setup_portio_remap(void)
 {
 }
 
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index a09e1133ced..c5b0eb51e53 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -127,10 +127,6 @@ static inline physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
 }
 
 
-static inline void setup_portio_remap(void)
-{
-}
-
 extern unsigned int boot_cpu_physical_apicid;
 static inline int check_phys_apicid_present(int cpu_physical_apicid)
 {
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 22683e5b82b..54c20e19e28 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -132,10 +132,6 @@ static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
 	return physid_mask_of_physid(phys_apicid);
 }
 
-static inline void setup_portio_remap(void)
-{
-}
-
 static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
 	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 997618f2eb5..393a97c5685 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define setup_portio_remap (apic->setup_portio_remap)
 #define check_phys_apicid_present (apic->check_phys_apicid_present)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 8ac000f9928..6b626519cd7 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -92,19 +92,6 @@ static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
 
 extern void *xquad_portio;
 
-static inline void setup_portio_remap(void)
-{
-	int num_quads = num_online_nodes();
-
-	if (num_quads <= 1)
-       		return;
-
-	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
-	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
-		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
 static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
 	return (1);
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 79c1a45f886..131343b0b75 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -116,7 +116,7 @@ static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
 	return physid_mask_of_physid(0);
 }
 
-static inline void setup_portio_remap(void)
+static inline void summit_setup_portio_remap(void)
 {
 }
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 812bf39de35..0e7d26c01f9 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1170,7 +1170,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	map_cpu_to_logical_apicid();
 
-	setup_portio_remap();
+	if (apic->setup_portio_remap)
+		apic->setup_portio_remap();
 
 	smpboot_setup_io_apic();
 	/*
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 61396523074..424740554a3 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -84,7 +84,7 @@ struct genapic apic_bigsmp = {
 	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
-	.setup_portio_remap		= setup_portio_remap,
+	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 8fc704a3db7..b48a58daf71 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -65,7 +65,7 @@ struct genapic apic_default = {
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
-	.setup_portio_remap		= setup_portio_remap,
+	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 1e0e1627455..449eca5b604 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -126,7 +126,7 @@ struct genapic apic_es7000 = {
 	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
-	.setup_portio_remap		= setup_portio_remap,
+	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 839b86b765a..e60361b0bf1 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -44,6 +44,19 @@ static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
 	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
 }
 
+static void numaq_setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+       		return;
+
+	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
 struct genapic apic_numaq = {
 
 	.name				= "NUMAQ",
@@ -71,7 +84,7 @@ struct genapic apic_numaq = {
 	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
-	.setup_portio_remap		= setup_portio_remap,
+	.setup_portio_remap		= numaq_setup_portio_remap,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index b6e37607a52..ffcf7ca2e8c 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -64,7 +64,7 @@ struct genapic apic_summit = {
 	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
-	.setup_portio_remap		= setup_portio_remap,
+	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
-- 
cgit v1.2.3


From a27a621001f4c3e57caf47feff4b014577fd01c6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 12:43:18 +0100
Subject: x86: refactor ->check_phys_apicid_present() subarch methods

- spread out the namespace to per driver methods

 - extend it to 64-bit as well so that we can use
   apic->check_phys_apicid_present() unconditionally

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  6 +++---
 arch/x86/include/asm/es7000/apic.h            |  4 ++--
 arch/x86/include/asm/genapic.h                |  1 +
 arch/x86/include/asm/mach-default/mach_apic.h | 18 +++++++++++++-----
 arch/x86/include/asm/mach-generic/mach_apic.h |  1 -
 arch/x86/include/asm/numaq/apic.h             |  4 ++--
 arch/x86/include/asm/summit/apic.h            |  2 +-
 arch/x86/kernel/genapic_flat_64.c             |  4 ++--
 arch/x86/kernel/genx2apic_cluster.c           |  2 +-
 arch/x86/kernel/genx2apic_phys.c              |  2 +-
 arch/x86/kernel/genx2apic_uv_x.c              |  2 +-
 arch/x86/kernel/smpboot.c                     |  7 ++++++-
 arch/x86/mach-generic/bigsmp.c                |  2 +-
 arch/x86/mach-generic/default.c               |  2 +-
 arch/x86/mach-generic/es7000.c                |  2 +-
 arch/x86/mach-generic/numaq.c                 |  2 +-
 arch/x86/mach-generic/summit.c                |  2 +-
 17 files changed, 38 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 2fa70032e3b..5ba4118fcdf 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -99,13 +99,13 @@ static inline void bigsmp_setup_portio_remap(void)
 {
 }
 
-static inline void enable_apic_mode(void)
+static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
+	return 1;
 }
 
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+static inline void enable_apic_mode(void)
 {
-	return (1);
 }
 
 /* As we are using single CPU as destination, pick only one CPU here */
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index c5b0eb51e53..717c27f8da6 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -126,9 +126,9 @@ static inline physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
 	return physids_promote(0xff);
 }
 
-
 extern unsigned int boot_cpu_physical_apicid;
-static inline int check_phys_apicid_present(int cpu_physical_apicid)
+
+static inline int es7000_check_phys_apicid_present(int cpu_physical_apicid)
 {
 	boot_cpu_physical_apicid = read_apic_id();
 	return (1);
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 2cb14d51e45..f292fd02eba 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -110,6 +110,7 @@ DECLARE_PER_CPU(int, x2apic_extra_bits);
 extern void default_setup_apic_routing(void);
 
 extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
 #endif
 
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 54c20e19e28..0a824d3a223 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -118,13 +118,26 @@ static inline int __default_cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
+static inline int
+__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
 #ifdef CONFIG_X86_32
 static inline int default_cpu_present_to_apicid(int mps_cpu)
 {
 	return __default_cpu_present_to_apicid(mps_cpu);
 }
+
+static inline int
+default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
 #else
 extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
 #endif
 
 static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
@@ -132,11 +145,6 @@ static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
 	return physid_mask_of_physid(phys_apicid);
 }
 
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
 static inline void enable_apic_mode(void)
 {
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 393a97c5685..efd762d951a 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,7 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define check_phys_apicid_present (apic->check_phys_apicid_present)
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
 #define enable_apic_mode (apic->enable_apic_mode)
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 6b626519cd7..3be735e2ab9 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -92,9 +92,9 @@ static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
 
 extern void *xquad_portio;
 
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
-	return (1);
+	return 1;
 }
 
 static inline void enable_apic_mode(void)
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 131343b0b75..fe578f6df78 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -120,7 +120,7 @@ static inline void summit_setup_portio_remap(void)
 {
 }
 
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
 	return 1;
 }
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index f4a2c1c0a1a..78adf71f7e5 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -200,7 +200,7 @@ struct genapic apic_flat =  {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= NULL,
@@ -344,7 +344,7 @@ struct genapic apic_physflat =  {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= NULL,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 710d612a964..7062e24b18f 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -202,7 +202,7 @@ struct genapic apic_x2apic_cluster = {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= NULL,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 49a449178c3..7177a1110f0 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -198,7 +198,7 @@ struct genapic apic_x2apic_phys = {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= NULL,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index a08a6359186..debd721f0b4 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -263,7 +263,7 @@ struct genapic apic_x2apic_uv_x = {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= NULL,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= NULL,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 0e7d26c01f9..ab83be2f8e0 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -908,6 +908,11 @@ int default_cpu_present_to_apicid(int mps_cpu)
 {
 	return __default_cpu_present_to_apicid(mps_cpu);
 }
+
+int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
 #endif
 
 int __cpuinit native_cpu_up(unsigned int cpu)
@@ -1058,7 +1063,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 	 * Should not be necessary because the MP table should list the boot
 	 * CPU too, but we do it for the sake of robustness anyway.
 	 */
-	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+	if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) {
 		printk(KERN_NOTICE
 			"weird, boot CPU (#%d) not listed by the BIOS.\n",
 			boot_cpu_physical_apicid);
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 424740554a3..82743d16c23 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -85,7 +85,7 @@ struct genapic apic_bigsmp = {
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= check_phys_apicid_present,
+	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index b48a58daf71..d0374c69ad0 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -66,7 +66,7 @@ struct genapic apic_default = {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= check_phys_apicid_present,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 449eca5b604..52b3eb5e645 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -127,7 +127,7 @@ struct genapic apic_es7000 = {
 	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= check_phys_apicid_present,
+	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index e60361b0bf1..7ec2ca43ca2 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -85,7 +85,7 @@ struct genapic apic_numaq = {
 	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
 	.setup_portio_remap		= numaq_setup_portio_remap,
-	.check_phys_apicid_present	= check_phys_apicid_present,
+	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index ffcf7ca2e8c..acf12de8916 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -65,7 +65,7 @@ struct genapic apic_summit = {
 	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= check_phys_apicid_present,
+	.check_phys_apicid_present	= summit_check_phys_apicid_present,
 	.enable_apic_mode		= enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
-- 
cgit v1.2.3


From 4904033302c745342e3b3a611881cdee57fbe06a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 12:43:18 +0100
Subject: x86: refactor ->enable_apic_mode() subarch methods

Only ES7000 has a real ->enable_apic_mode() method, the other
subarchitectures define it but keep it empty.

So mark the vector as NULL, extend the generic code to handle
NULL -setup_portio_remap() entries and remove all the empty
handlers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 4 ----
 arch/x86/include/asm/mach-default/mach_apic.h | 3 ---
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 4 ----
 arch/x86/include/asm/summit/apic.h            | 4 ----
 arch/x86/kernel/apic.c                        | 3 ++-
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 6 +++---
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 11 files changed, 9 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 5ba4118fcdf..f49d440862f 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -104,10 +104,6 @@ static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
 	return 1;
 }
 
-static inline void enable_apic_mode(void)
-{
-}
-
 /* As we are using single CPU as destination, pick only one CPU here */
 static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 0a824d3a223..3647c92d45e 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -145,8 +145,5 @@ static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
 	return physid_mask_of_physid(phys_apicid);
 }
 
-static inline void enable_apic_mode(void)
-{
-}
 #endif /* CONFIG_X86_LOCAL_APIC */
 #endif /* _ASM_X86_MACH_DEFAULT_MACH_APIC_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index efd762d951a..6fed521585c 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -5,7 +5,6 @@
 
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
-#define enable_apic_mode (apic->enable_apic_mode)
 #define phys_pkg_id (apic->phys_pkg_id)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 3be735e2ab9..dc93c30972e 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -97,10 +97,6 @@ static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
 	return 1;
 }
 
-static inline void enable_apic_mode(void)
-{
-}
-
 /*
  * We use physical apicids here, not logical, so just return the default
  * physical broadcast to stop people from breaking us
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index fe578f6df78..526d19e7944 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -125,10 +125,6 @@ static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
 	return 1;
 }
 
-static inline void enable_apic_mode(void)
-{
-}
-
 static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
 	int num_bits_set;
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index fcbcc03cd4b..9d6374da478 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1763,7 +1763,8 @@ void __init connect_bsp_APIC(void)
 		outb(0x01, 0x23);
 	}
 #endif
-	enable_apic_mode();
+	if (apic->enable_apic_mode)
+		apic->enable_apic_mode();
 }
 
 /**
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 82743d16c23..e151b472456 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -86,7 +86,7 @@ struct genapic apic_bigsmp = {
 	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
-	.enable_apic_mode		= enable_apic_mode,
+	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index d0374c69ad0..ac6be195b97 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -67,7 +67,7 @@ struct genapic apic_default = {
 	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= enable_apic_mode,
+	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 52b3eb5e645..9acb71120ef 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -36,10 +36,10 @@ static int probe_es7000(void)
 }
 
 extern void es7000_sw_apic(void);
-static void __init enable_apic_mode(void)
+
+static void __init es7000_enable_apic_mode(void)
 {
 	es7000_sw_apic();
-	return;
 }
 
 static __init int
@@ -128,7 +128,7 @@ struct genapic apic_es7000 = {
 	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
-	.enable_apic_mode		= enable_apic_mode,
+	.enable_apic_mode		= es7000_enable_apic_mode,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 7ec2ca43ca2..8d3358de3fe 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -86,7 +86,7 @@ struct genapic apic_numaq = {
 	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
 	.setup_portio_remap		= numaq_setup_portio_remap,
 	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
-	.enable_apic_mode		= enable_apic_mode,
+	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index acf12de8916..cb83bcbb2de 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -66,7 +66,7 @@ struct genapic apic_summit = {
 	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= summit_check_phys_apicid_present,
-	.enable_apic_mode		= enable_apic_mode,
+	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
-- 
cgit v1.2.3


From b0b20e5a3a6615ae750804523aeedd32911bb9d6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 13:15:06 +0100
Subject: x86, es7000: clean up es7000_enable_apic_mode()

- eliminate the needless es7000_enable_apic_mode() complication which
  was not apparent prior the namespace cleanups

- clean up the control flow in es7000_enable_apic_mode()

- other cleanups

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/apic.h |  2 ++
 arch/x86/kernel/es7000_32.c        | 27 ++++++++++++++-------------
 arch/x86/mach-generic/es7000.c     |  7 -------
 3 files changed, 16 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 717c27f8da6..038c4f0e480 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -36,6 +36,8 @@ static inline unsigned long es7000_check_apicid_present(int bit)
 	return physid_isset(bit, phys_cpu_present_map);
 }
 
+extern void es7000_enable_apic_mode(void);
+
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline unsigned long calculate_ldr(int cpu)
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 20a2a43c2a9..e73fe18488a 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -359,20 +359,21 @@ es7000_mip_write(struct mip_reg *mip_reg)
 	return status;
 }
 
-void __init
-es7000_sw_apic(void)
+void __init es7000_enable_apic_mode(void)
 {
-	if (es7000_plat) {
-		int mip_status;
-		struct mip_reg es7000_mip_reg;
-
-		printk("ES7000: Enabling APIC mode.\n");
-        	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-        	es7000_mip_reg.off_0 = MIP_SW_APIC;
-        	es7000_mip_reg.off_38 = (MIP_VALID);
-        	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
-              		printk("es7000_sw_apic: command failed, status = %x\n",
-				mip_status);
+	struct mip_reg es7000_mip_reg;
+	int mip_status;
+
+	if (!es7000_plat)
 		return;
+
+	printk("ES7000: Enabling APIC mode.\n");
+       	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+       	es7000_mip_reg.off_0 = MIP_SW_APIC;
+       	es7000_mip_reg.off_38 = MIP_VALID;
+
+       	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) {
+		printk("es7000_enable_apic_mode: command failed, status = %x\n",
+			mip_status);
 	}
 }
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 9acb71120ef..1185964b7a3 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -35,13 +35,6 @@ static int probe_es7000(void)
 	return 0;
 }
 
-extern void es7000_sw_apic(void);
-
-static void __init es7000_enable_apic_mode(void)
-{
-	es7000_sw_apic();
-}
-
 static __init int
 mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
-- 
cgit v1.2.3


From d4c9a9f3d416cfa1f5ffbe09d864d069467fe693 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 13:31:22 +0100
Subject: x86, apic: unify phys_pkg_id()

- unify the call signature of 64-bit to that of 32-bit

 - clean up the types all around

 - clean up namespace contamination

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            |  2 +-
 arch/x86/include/asm/es7000/apic.h            |  2 +-
 arch/x86/include/asm/genapic.h                |  6 +-----
 arch/x86/include/asm/mach-default/mach_apic.h |  2 +-
 arch/x86/include/asm/numaq/apic.h             |  2 +-
 arch/x86/include/asm/summit/apic.h            |  5 +++--
 arch/x86/kernel/cpu/addon_cpuid_features.c    | 10 +---------
 arch/x86/kernel/cpu/common.c                  | 11 +----------
 arch/x86/kernel/genapic_flat_64.c             |  6 +++---
 arch/x86/kernel/genx2apic_cluster.c           |  4 ++--
 arch/x86/kernel/genx2apic_phys.c              |  4 ++--
 arch/x86/kernel/genx2apic_uv_x.c              |  4 ++--
 12 files changed, 19 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index f49d440862f..b7cba5b5635 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -133,7 +133,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+static inline int phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index 038c4f0e480..d2c6c202e8b 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -221,7 +221,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 	return apicid;
 }
 
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+static inline int phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index f292fd02eba..14b19de8cd0 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -48,11 +48,7 @@ struct genapic {
 	void (*setup_portio_remap)(void);
 	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
 	void (*enable_apic_mode)(void);
-#ifdef CONFIG_X86_32
-	u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
-#else
-	unsigned int (*phys_pkg_id)(int index_msb);
-#endif
+	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
 
 	/*
 	 * When one of the next two hooks returns 1 the genapic
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 3647c92d45e..55797a35150 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -65,7 +65,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return (unsigned int)(mask1 & mask2 & mask3);
 }
 
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+static inline int phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index dc93c30972e..bc2c8a425c0 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -113,7 +113,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 }
 
 /* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+static inline int phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 526d19e7944..64cd441ae00 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -175,13 +175,14 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 	return apicid;
 }
 
-/* cpuid returns the value latched in the HW at reset, not the APIC ID
+/*
+ * cpuid returns the value latched in the HW at reset, not the APIC ID
  * register's value.  For any box whose BIOS changes APIC IDs, like
  * clustered APIC systems, we must use hard_smp_processor_id.
  *
  * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
  */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+static inline int phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return hard_smp_processor_id() >> index_msb;
 }
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 4e581fdc0a5..84f8e4a5aef 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -116,7 +116,6 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 
 	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
 
-#ifdef CONFIG_X86_32
 	c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
 						 & core_select_mask;
 	c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
@@ -124,14 +123,7 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 	 * Reinit the apicid, now that we have extended initial_apicid.
 	 */
 	c->apicid = phys_pkg_id(c->initial_apicid, 0);
-#else
-	c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
-	c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
-	/*
-	 * Reinit the apicid, now that we have extended initial_apicid.
-	 */
-	c->apicid = phys_pkg_id(0);
-#endif
+
 	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
 
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 275e2cb43b9..93c491c4fe7 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -442,11 +442,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 		}
 
 		index_msb = get_count_order(smp_num_siblings);
-#ifdef CONFIG_X86_64
-		c->phys_proc_id = phys_pkg_id(index_msb);
-#else
 		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
-#endif
 
 		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
 
@@ -454,13 +450,8 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 
 		core_bits = get_count_order(c->x86_max_cores);
 
-#ifdef CONFIG_X86_64
-		c->cpu_core_id = phys_pkg_id(index_msb) &
-					       ((1 << core_bits) - 1);
-#else
 		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
 					       ((1 << core_bits) - 1);
-#endif
 	}
 
 out:
@@ -742,7 +733,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 		this_cpu->c_identify(c);
 
 #ifdef CONFIG_X86_64
-	c->apicid = phys_pkg_id(0);
+	c->apicid = phys_pkg_id(c->initial_apicid, 0);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 78adf71f7e5..cc9e07b9609 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -169,7 +169,7 @@ static unsigned int flat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return mask1 & mask2;
 }
 
-static unsigned int phys_pkg_id(int index_msb)
+static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
 {
 	return hard_smp_processor_id() >> index_msb;
 }
@@ -202,7 +202,7 @@ struct genapic apic_flat =  {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= flat_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
@@ -346,7 +346,7 @@ struct genapic apic_physflat =  {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= flat_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 7062e24b18f..18b6f14376e 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -157,7 +157,7 @@ static unsigned long set_apic_id(unsigned int id)
 	return x;
 }
 
-static unsigned int phys_pkg_id(int index_msb)
+static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
 {
 	return current_cpu_data.initial_apicid >> index_msb;
 }
@@ -204,7 +204,7 @@ struct genapic apic_x2apic_cluster = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= x2apic_cluster_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 7177a1110f0..2cb6f49e4c5 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -156,7 +156,7 @@ static unsigned long set_apic_id(unsigned int id)
 	return x;
 }
 
-static unsigned int phys_pkg_id(int index_msb)
+static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
 {
 	return current_cpu_data.initial_apicid >> index_msb;
 }
@@ -200,7 +200,7 @@ struct genapic apic_x2apic_phys = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= x2apic_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index debd721f0b4..67e7658775e 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -226,7 +226,7 @@ static unsigned int uv_read_apic_id(void)
 	return get_apic_id(apic_read(APIC_ID));
 }
 
-static unsigned int phys_pkg_id(int index_msb)
+static int uv_phys_pkg_id(int initial_apicid, int index_msb)
 {
 	return uv_read_apic_id() >> index_msb;
 }
@@ -265,7 +265,7 @@ struct genapic apic_x2apic_uv_x = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= uv_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
-- 
cgit v1.2.3


From cb8cc442dc7e07cb5438b357843ab4095ad73933 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 13:24:54 +0100
Subject: x86, apic: refactor ->phys_pkg_id()

Refactor the ->phys_pkg_id() methods:

 - namespace separation

 - macro wrapper removal

 - open-coded calls to the methods in the generic code

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 2 +-
 arch/x86/include/asm/es7000/apic.h            | 2 +-
 arch/x86/include/asm/mach-default/mach_apic.h | 3 +--
 arch/x86/include/asm/mach-generic/mach_apic.h | 1 -
 arch/x86/include/asm/numaq/apic.h             | 2 +-
 arch/x86/include/asm/summit/apic.h            | 2 +-
 arch/x86/kernel/cpu/addon_cpuid_features.c    | 6 +++---
 arch/x86/kernel/cpu/common.c                  | 8 ++++----
 arch/x86/mach-generic/bigsmp.c                | 2 +-
 arch/x86/mach-generic/default.c               | 2 +-
 arch/x86/mach-generic/es7000.c                | 2 +-
 arch/x86/mach-generic/numaq.c                 | 2 +-
 arch/x86/mach-generic/summit.c                | 2 +-
 13 files changed, 17 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index b7cba5b5635..1230f5d7a38 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -133,7 +133,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-static inline int phys_pkg_id(int cpuid_apic, int index_msb)
+static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index d2c6c202e8b..f183dfb4de4 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -221,7 +221,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 	return apicid;
 }
 
-static inline int phys_pkg_id(int cpuid_apic, int index_msb)
+static inline int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 55797a35150..d0605281a6b 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -21,7 +21,6 @@ static inline const struct cpumask *default_target_cpus(void)
 #include <asm/genapic.h>
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
-#define phys_pkg_id	(apic->phys_pkg_id)
 #define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
 #define send_IPI_self (apic->send_IPI_self)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
@@ -65,7 +64,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return (unsigned int)(mask1 & mask2 & mask3);
 }
 
-static inline int phys_pkg_id(int cpuid_apic, int index_msb)
+static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 6fed521585c..1eeb5b61e48 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -5,7 +5,6 @@
 
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
-#define phys_pkg_id (apic->phys_pkg_id)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 
 extern void generic_bigsmp_probe(void);
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index bc2c8a425c0..765c4d5124c 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -113,7 +113,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 }
 
 /* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline int phys_pkg_id(int cpuid_apic, int index_msb)
+static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index 64cd441ae00..fa6b3b45290 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -182,7 +182,7 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
  *
  * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
  */
-static inline int phys_pkg_id(int cpuid_apic, int index_msb)
+static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return hard_smp_processor_id() >> index_msb;
 }
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 84f8e4a5aef..e8bb892c09f 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -116,13 +116,13 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 
 	core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
 
-	c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
+	c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, ht_mask_width)
 						 & core_select_mask;
-	c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+	c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, core_plus_mask_width);
 	/*
 	 * Reinit the apicid, now that we have extended initial_apicid.
 	 */
-	c->apicid = phys_pkg_id(c->initial_apicid, 0);
+	c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
 
 	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 93c491c4fe7..055b9c3a660 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -442,7 +442,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 		}
 
 		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
+		c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb);
 
 		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
 
@@ -450,7 +450,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 
 		core_bits = get_count_order(c->x86_max_cores);
 
-		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
+		c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) &
 					       ((1 << core_bits) - 1);
 	}
 
@@ -686,7 +686,7 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
 #ifdef CONFIG_X86_32
 # ifdef CONFIG_X86_HT
-		c->apicid = phys_pkg_id(c->initial_apicid, 0);
+		c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
 # else
 		c->apicid = c->initial_apicid;
 # endif
@@ -733,7 +733,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 		this_cpu->c_identify(c);
 
 #ifdef CONFIG_X86_64
-	c->apicid = phys_pkg_id(c->initial_apicid, 0);
+	c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
 #endif
 
 	/*
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index e151b472456..d04b38954df 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -87,7 +87,7 @@ struct genapic apic_bigsmp = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= bigsmp_phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index ac6be195b97..5c9266f756e 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -68,7 +68,7 @@ struct genapic apic_default = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= default_phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 1185964b7a3..52787e34c9c 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -122,7 +122,7 @@ struct genapic apic_es7000 = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
 	.enable_apic_mode		= es7000_enable_apic_mode,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= es7000_phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 8d3358de3fe..6a1134e6d72 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -87,7 +87,7 @@ struct genapic apic_numaq = {
 	.setup_portio_remap		= numaq_setup_portio_remap,
 	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= numaq_phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index cb83bcbb2de..2d6843a61d9 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -67,7 +67,7 @@ struct genapic apic_summit = {
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= summit_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= phys_pkg_id,
+	.phys_pkg_id			= summit_phys_pkg_id,
 	.mps_oem_check			= mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
-- 
cgit v1.2.3


From 5f836405ef632ba82f4a5261ff2be4198e53b51b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 13:47:42 +0100
Subject: x86, smp: clean up mps_oem_check()

Impact: cleanup

 - allow NULL ->mps_oem_check() entries

 - clean up the code flow

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h |  3 +--
 arch/x86/mach-generic/probe.c  | 22 +++++++++++++---------
 2 files changed, 14 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 14b19de8cd0..8bb1c73c55b 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -55,8 +55,7 @@ struct genapic {
 	 * is switched to this. Essentially they are additional
 	 * probe functions:
 	 */
-	int (*mps_oem_check)(struct mpc_table *mpc, char *oem,
-			     char *productid);
+	int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid);
 
 	unsigned int (*get_apic_id)(unsigned long x);
 	unsigned long (*set_apic_id)(unsigned int id);
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index a21e2b1a701..799a70f4d90 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -113,17 +113,21 @@ void __init generic_apic_probe(void)
 int __init mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	int i;
+
 	for (i = 0; apic_probe[i]; ++i) {
-		if (apic_probe[i]->mps_oem_check(mpc, oem, productid)) {
-			if (!cmdline_apic) {
-				apic = apic_probe[i];
-				if (x86_quirks->update_genapic)
-					x86_quirks->update_genapic();
-				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-				       apic->name);
-			}
-			return 1;
+		if (!apic_probe[i]->mps_oem_check)
+			continue;
+		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+			continue;
+
+		if (!cmdline_apic) {
+			apic = apic_probe[i];
+			if (x86_quirks->update_genapic)
+				x86_quirks->update_genapic();
+			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+			       apic->name);
 		}
+		return 1;
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From 1322a2e2db87c938d8381f8501af9a4d0eab8bc7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 13:54:56 +0100
Subject: x86, mpparse: call the generic quirk handlers early

Call all the registered MPS quirk handlers early. These methods scan
low RAM typically for specific signatures so are safe to be called
early.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/mpparse.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index c8a534a16d9..f6fb1928439 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -292,16 +292,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 		return 0;
 
 #ifdef CONFIG_X86_32
-	/*
-	 * need to make sure summit and es7000's mps_oem_check is safe to be
-	 * called early via genericarch 's mps_oem_check
-	 */
-	if (early) {
-#ifdef CONFIG_X86_NUMAQ
-		numaq_mps_oem_check(mpc, oem, str);
-#endif
-	} else
-		mps_oem_check(mpc, oem, str);
+	mps_oem_check(mpc, oem, str);
 #endif
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
-- 
cgit v1.2.3


From 9c7642470ecf03d8b4946a2addc8fe631b8426dd Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 13:44:32 +0100
Subject: x86: consolidate the ->mps_oem_check() code

- spread out the mps_oem_check() namespace on a per APIC driver basis

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/mpparse.h            | 6 ------
 arch/x86/include/asm/mach-default/mach_mpparse.h | 2 +-
 arch/x86/include/asm/mach-generic/mach_mpparse.h | 3 +--
 arch/x86/include/asm/summit/mpparse.h            | 4 ++--
 arch/x86/kernel/mpparse.c                        | 2 +-
 arch/x86/mach-generic/bigsmp.c                   | 2 +-
 arch/x86/mach-generic/default.c                  | 2 +-
 arch/x86/mach-generic/es7000.c                   | 5 +++--
 arch/x86/mach-generic/numaq.c                    | 4 ++--
 arch/x86/mach-generic/probe.c                    | 3 ++-
 arch/x86/mach-generic/summit.c                   | 2 +-
 11 files changed, 15 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/mpparse.h b/arch/x86/include/asm/es7000/mpparse.h
index 30692c4ae85..662eb1e574d 100644
--- a/arch/x86/include/asm/es7000/mpparse.h
+++ b/arch/x86/include/asm/es7000/mpparse.h
@@ -8,13 +8,7 @@ extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
 extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
 extern void setup_unisys(void);
 
-#ifndef CONFIG_X86_GENERICARCH
-extern int default_acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-extern int mps_oem_check(struct mpc_table *mpc, char *oem, char *productid);
-#endif
-
 #ifdef CONFIG_ACPI
-
 static inline int es7000_check_dsdt(void)
 {
 	struct acpi_table_header header;
diff --git a/arch/x86/include/asm/mach-default/mach_mpparse.h b/arch/x86/include/asm/mach-default/mach_mpparse.h
index 8fa01770ba6..af0da140df9 100644
--- a/arch/x86/include/asm/mach-default/mach_mpparse.h
+++ b/arch/x86/include/asm/mach-default/mach_mpparse.h
@@ -2,7 +2,7 @@
 #define _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
 
 static inline int
-mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	return 0;
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_mpparse.h b/arch/x86/include/asm/mach-generic/mach_mpparse.h
index f497d96c76b..22bfb56f8fb 100644
--- a/arch/x86/include/asm/mach-generic/mach_mpparse.h
+++ b/arch/x86/include/asm/mach-generic/mach_mpparse.h
@@ -1,8 +1,7 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
 #define _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
 
-
-extern int mps_oem_check(struct mpc_table *, char *, char *);
+extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
 
 extern int default_acpi_madt_oem_check(char *, char *);
 
diff --git a/arch/x86/include/asm/summit/mpparse.h b/arch/x86/include/asm/summit/mpparse.h
index 555ed8238e9..4bbcce39acb 100644
--- a/arch/x86/include/asm/summit/mpparse.h
+++ b/arch/x86/include/asm/summit/mpparse.h
@@ -11,8 +11,8 @@ extern void setup_summit(void);
 #define setup_summit()	{}
 #endif
 
-static inline int mps_oem_check(struct mpc_table *mpc, char *oem,
-		char *productid)
+static inline int
+summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	if (!strncmp(oem, "IBM ENSW", 8) &&
 			(!strncmp(productid, "VIGIL SMP", 9)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index f6fb1928439..b12fa5ce6f5 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -292,7 +292,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 		return 0;
 
 #ifdef CONFIG_X86_32
-	mps_oem_check(mpc, oem, str);
+	generic_mps_oem_check(mpc, oem, str);
 #endif
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index d04b38954df..6bf6aafeb2c 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -88,7 +88,7 @@ struct genapic apic_bigsmp = {
 	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= bigsmp_phys_pkg_id,
-	.mps_oem_check			= mps_oem_check,
+	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
 	.set_apic_id			= NULL,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 5c9266f756e..e5f85cd75b4 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -69,7 +69,7 @@ struct genapic apic_default = {
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= default_phys_pkg_id,
-	.mps_oem_check			= mps_oem_check,
+	.mps_oem_check			= NULL,
 
 	.get_apic_id			= get_apic_id,
 	.set_apic_id			= NULL,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 52787e34c9c..f861163cd39 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -36,11 +36,12 @@ static int probe_es7000(void)
 }
 
 static __init int
-mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	if (mpc->oemptr) {
 		struct mpc_oemtable *oem_table =
 			(struct mpc_oemtable *)mpc->oemptr;
+
 		if (!strncmp(oem, "UNISYS", 6))
 			return parse_unisys_oem((char *)oem_table);
 	}
@@ -123,7 +124,7 @@ struct genapic apic_es7000 = {
 	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
 	.enable_apic_mode		= es7000_enable_apic_mode,
 	.phys_pkg_id			= es7000_phys_pkg_id,
-	.mps_oem_check			= mps_oem_check,
+	.mps_oem_check			= es7000_mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
 	.set_apic_id			= NULL,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 6a1134e6d72..517882c9c15 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -19,7 +19,7 @@
 #include <asm/numaq/wakecpu.h>
 #include <asm/numaq.h>
 
-static int mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+static int __numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	numaq_mps_oem_check(mpc, oem, productid);
 	return found_numaq;
@@ -88,7 +88,7 @@ struct genapic apic_numaq = {
 	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= numaq_phys_pkg_id,
-	.mps_oem_check			= mps_oem_check,
+	.mps_oem_check			= __numaq_mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
 	.set_apic_id			= NULL,
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index 799a70f4d90..ab68c6e5c48 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -110,7 +110,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+int __init
+generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	int i;
 
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 2d6843a61d9..719e944ff30 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -68,7 +68,7 @@ struct genapic apic_summit = {
 	.check_phys_apicid_present	= summit_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= summit_phys_pkg_id,
-	.mps_oem_check			= mps_oem_check,
+	.mps_oem_check			= summit_mps_oem_check,
 
 	.get_apic_id			= get_apic_id,
 	.set_apic_id			= NULL,
-- 
cgit v1.2.3


From ca6c8ed4646f8ccaa4f7db618bf69b8b8fb49767 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 14:08:38 +0100
Subject: x86, apic: refactor ->get_apic_id() & GET_APIC_ID()

- spread out the namespace on a per driver basis

 - get rid of macro wrappers

 - small cleanups

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apicdef.h            |  6 ++----
 arch/x86/include/asm/es7000/apicdef.h            |  6 ++----
 arch/x86/include/asm/mach-default/mach_apic.h    |  2 +-
 arch/x86/include/asm/mach-default/mach_apicdef.h | 10 +++++-----
 arch/x86/include/asm/mach-generic/mach_apicdef.h |  1 -
 arch/x86/include/asm/numaq/apicdef.h             |  7 ++-----
 arch/x86/include/asm/smp.h                       |  2 +-
 arch/x86/include/asm/summit/apicdef.h            |  6 ++----
 arch/x86/kernel/genapic_flat_64.c                |  9 +++++----
 arch/x86/kernel/genx2apic_cluster.c              |  4 ++--
 arch/x86/kernel/genx2apic_phys.c                 |  4 ++--
 arch/x86/kernel/genx2apic_uv_x.c                 |  6 +++---
 arch/x86/mach-generic/bigsmp.c                   |  2 +-
 arch/x86/mach-generic/default.c                  |  2 +-
 arch/x86/mach-generic/es7000.c                   |  2 +-
 arch/x86/mach-generic/numaq.c                    |  2 +-
 arch/x86/mach-generic/summit.c                   |  2 +-
 17 files changed, 32 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apicdef.h b/arch/x86/include/asm/bigsmp/apicdef.h
index 392c3f5ef2f..ed25dd6503b 100644
--- a/arch/x86/include/asm/bigsmp/apicdef.h
+++ b/arch/x86/include/asm/bigsmp/apicdef.h
@@ -3,11 +3,9 @@
 
 #define		APIC_ID_MASK		(0xFF<<24)
 
-static inline unsigned get_apic_id(unsigned long x)
+static inline unsigned bigsmp_get_apic_id(unsigned long x)
 {
-	return (((x)>>24)&0xFF);
+	return (x >> 24) & 0xFF;
 }
 
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
 #endif
diff --git a/arch/x86/include/asm/es7000/apicdef.h b/arch/x86/include/asm/es7000/apicdef.h
index 8b234a3cb85..e23791762a1 100644
--- a/arch/x86/include/asm/es7000/apicdef.h
+++ b/arch/x86/include/asm/es7000/apicdef.h
@@ -3,11 +3,9 @@
 
 #define		APIC_ID_MASK		(0xFF<<24)
 
-static inline unsigned get_apic_id(unsigned long x)
+static inline unsigned int es7000_get_apic_id(unsigned long x)
 {
-	return (((x)>>24)&0xFF);
+	return (x >> 24) & 0xFF;
 }
 
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
 #endif
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index d0605281a6b..8719208f273 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -21,7 +21,7 @@ static inline const struct cpumask *default_target_cpus(void)
 #include <asm/genapic.h>
 #define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
 #define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
-#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))
+#define read_apic_id()  (apic->get_apic_id(apic_read(APIC_ID)))
 #define send_IPI_self (apic->send_IPI_self)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void default_setup_apic_routing(void);
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
index b4dcc0971c7..e84d437ba2b 100644
--- a/arch/x86/include/asm/mach-default/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-default/mach_apicdef.h
@@ -5,20 +5,20 @@
 
 #ifdef CONFIG_X86_64
 #define	APIC_ID_MASK		(apic->apic_id_mask)
-#define GET_APIC_ID(x)		(apic->get_apic_id(x))
 #define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
 #define		APIC_ID_MASK		(0xF<<24)
-static inline unsigned get_apic_id(unsigned long x) 
+
+static inline unsigned default_get_apic_id(unsigned long x) 
 {
 	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+
 	if (APIC_XAPIC(ver))
-		return (((x)>>24)&0xFF);
+		return (x >> 24) & 0xFF;
 	else
-		return (((x)>>24)&0xF);
+		return (x >> 24) & 0x0F;
 } 
 
-#define		GET_APIC_ID(x)	get_apic_id(x)
 #endif
 
 #endif /* _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apicdef.h b/arch/x86/include/asm/mach-generic/mach_apicdef.h
index acc9adddb34..645520bcd2c 100644
--- a/arch/x86/include/asm/mach-generic/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-generic/mach_apicdef.h
@@ -4,7 +4,6 @@
 #ifndef APIC_DEFINITION
 #include <asm/genapic.h>
 
-#define GET_APIC_ID (apic->get_apic_id)
 #define APIC_ID_MASK (apic->apic_id_mask)
 #endif
 
diff --git a/arch/x86/include/asm/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h
index e012a46cc22..29f5e3d34e5 100644
--- a/arch/x86/include/asm/numaq/apicdef.h
+++ b/arch/x86/include/asm/numaq/apicdef.h
@@ -1,14 +1,11 @@
 #ifndef __ASM_NUMAQ_APICDEF_H
 #define __ASM_NUMAQ_APICDEF_H
 
-
 #define APIC_ID_MASK (0xF<<24)
 
-static inline unsigned get_apic_id(unsigned long x)
+static inline unsigned int numaq_get_apic_id(unsigned long x)
 {
-	        return (((x)>>24)&0x0F);
+	return (x >> 24) & 0x0F;
 }
 
-#define         GET_APIC_ID(x)  get_apic_id(x)
-
 #endif
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 45ef8a1b9d7..c63d480802a 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -189,7 +189,7 @@ static inline unsigned int read_apic_id(void)
 
 	reg = *(u32 *)(APIC_BASE + APIC_ID);
 
-	return GET_APIC_ID(reg);
+	return apic->get_apic_id(reg);
 }
 #endif
 
diff --git a/arch/x86/include/asm/summit/apicdef.h b/arch/x86/include/asm/summit/apicdef.h
index f3fbca1f61c..4286528af7c 100644
--- a/arch/x86/include/asm/summit/apicdef.h
+++ b/arch/x86/include/asm/summit/apicdef.h
@@ -3,11 +3,9 @@
 
 #define		APIC_ID_MASK		(0xFF<<24)
 
-static inline unsigned get_apic_id(unsigned long x)
+static inline unsigned summit_get_apic_id(unsigned long x)
 {
-	return (x>>24)&0xFF;
+	return (x >> 24) & 0xFF;
 }
 
-#define		GET_APIC_ID(x)	get_apic_id(x)
-
 #endif
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index cc9e07b9609..ab47091dac2 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -126,11 +126,12 @@ static void flat_send_IPI_all(int vector)
 		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->dest_logical);
 }
 
-static unsigned int get_apic_id(unsigned long x)
+static unsigned int flat_get_apic_id(unsigned long x)
 {
 	unsigned int id;
 
 	id = (((x)>>24) & 0xFFu);
+
 	return id;
 }
 
@@ -146,7 +147,7 @@ static unsigned int read_xapic_id(void)
 {
 	unsigned int id;
 
-	id = get_apic_id(apic_read(APIC_ID));
+	id = flat_get_apic_id(apic_read(APIC_ID));
 	return id;
 }
 
@@ -205,7 +206,7 @@ struct genapic apic_flat =  {
 	.phys_pkg_id			= flat_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= flat_get_apic_id,
 	.set_apic_id			= set_apic_id,
 	.apic_id_mask			= 0xFFu << 24,
 
@@ -349,7 +350,7 @@ struct genapic apic_physflat =  {
 	.phys_pkg_id			= flat_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= flat_get_apic_id,
 	.set_apic_id			= set_apic_id,
 	.apic_id_mask			= 0xFFu<<24,
 
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 18b6f14376e..c7557e05184 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -141,7 +141,7 @@ static unsigned int x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-static unsigned int get_apic_id(unsigned long x)
+static unsigned int x2apic_cluster_phys_get_apic_id(unsigned long x)
 {
 	unsigned int id;
 
@@ -207,7 +207,7 @@ struct genapic apic_x2apic_cluster = {
 	.phys_pkg_id			= x2apic_cluster_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= x2apic_cluster_phys_get_apic_id,
 	.set_apic_id			= set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 2cb6f49e4c5..80cba49cfd8 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -140,7 +140,7 @@ static unsigned int x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-static unsigned int get_apic_id(unsigned long x)
+static unsigned int x2apic_phys_get_apic_id(unsigned long x)
 {
 	unsigned int id;
 
@@ -203,7 +203,7 @@ struct genapic apic_x2apic_phys = {
 	.phys_pkg_id			= x2apic_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= x2apic_phys_get_apic_id,
 	.set_apic_id			= set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 67e7658775e..50310b96adc 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -201,7 +201,7 @@ static unsigned int uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-static unsigned int get_apic_id(unsigned long x)
+static unsigned int x2apic_get_apic_id(unsigned long x)
 {
 	unsigned int id;
 
@@ -223,7 +223,7 @@ static unsigned long set_apic_id(unsigned int id)
 static unsigned int uv_read_apic_id(void)
 {
 
-	return get_apic_id(apic_read(APIC_ID));
+	return x2apic_get_apic_id(apic_read(APIC_ID));
 }
 
 static int uv_phys_pkg_id(int initial_apicid, int index_msb)
@@ -268,7 +268,7 @@ struct genapic apic_x2apic_uv_x = {
 	.phys_pkg_id			= uv_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= x2apic_get_apic_id,
 	.set_apic_id			= set_apic_id,
 	.apic_id_mask			= 0xFFFFFFFFu,
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 6bf6aafeb2c..9eca977227c 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -90,7 +90,7 @@ struct genapic apic_bigsmp = {
 	.phys_pkg_id			= bigsmp_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= bigsmp_get_apic_id,
 	.set_apic_id			= NULL,
 	.apic_id_mask			= APIC_ID_MASK,
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index e5f85cd75b4..d51a3f0335a 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -71,7 +71,7 @@ struct genapic apic_default = {
 	.phys_pkg_id			= default_phys_pkg_id,
 	.mps_oem_check			= NULL,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= default_get_apic_id,
 	.set_apic_id			= NULL,
 	.apic_id_mask			= APIC_ID_MASK,
 
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index f861163cd39..1944675db62 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -126,7 +126,7 @@ struct genapic apic_es7000 = {
 	.phys_pkg_id			= es7000_phys_pkg_id,
 	.mps_oem_check			= es7000_mps_oem_check,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= es7000_get_apic_id,
 	.set_apic_id			= NULL,
 	.apic_id_mask			= APIC_ID_MASK,
 
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 517882c9c15..fcbba84c090 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -90,7 +90,7 @@ struct genapic apic_numaq = {
 	.phys_pkg_id			= numaq_phys_pkg_id,
 	.mps_oem_check			= __numaq_mps_oem_check,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= numaq_get_apic_id,
 	.set_apic_id			= NULL,
 	.apic_id_mask			= APIC_ID_MASK,
 
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 719e944ff30..5650eaf9061 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -70,7 +70,7 @@ struct genapic apic_summit = {
 	.phys_pkg_id			= summit_phys_pkg_id,
 	.mps_oem_check			= summit_mps_oem_check,
 
-	.get_apic_id			= get_apic_id,
+	.get_apic_id			= summit_get_apic_id,
 	.set_apic_id			= NULL,
 	.apic_id_mask			= APIC_ID_MASK,
 
-- 
cgit v1.2.3


From 5b8127277bc4cdca78eda5ee900a314642822ace Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 14:59:17 +0100
Subject: x86, apic: refactor ->apic_id_mask & APIC_ID_MASK

- spread out the namespace on a per driver basis

 - get rid of wrapper macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apicdef.h            | 2 +-
 arch/x86/include/asm/es7000/apicdef.h            | 2 +-
 arch/x86/include/asm/mach-default/mach_apicdef.h | 3 +--
 arch/x86/include/asm/mach-generic/mach_apicdef.h | 2 --
 arch/x86/include/asm/numaq/apicdef.h             | 2 +-
 arch/x86/include/asm/summit/apicdef.h            | 2 +-
 arch/x86/kernel/apic.c                           | 4 ++--
 arch/x86/kernel/genapic_flat_64.c                | 2 +-
 arch/x86/mach-generic/bigsmp.c                   | 2 +-
 arch/x86/mach-generic/default.c                  | 2 +-
 arch/x86/mach-generic/es7000.c                   | 2 +-
 arch/x86/mach-generic/numaq.c                    | 2 +-
 arch/x86/mach-generic/summit.c                   | 2 +-
 13 files changed, 13 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apicdef.h b/arch/x86/include/asm/bigsmp/apicdef.h
index ed25dd6503b..6e587818c7e 100644
--- a/arch/x86/include/asm/bigsmp/apicdef.h
+++ b/arch/x86/include/asm/bigsmp/apicdef.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_APICDEF_H
 #define __ASM_MACH_APICDEF_H
 
-#define		APIC_ID_MASK		(0xFF<<24)
+#define		BIGSMP_APIC_ID_MASK		(0xFF<<24)
 
 static inline unsigned bigsmp_get_apic_id(unsigned long x)
 {
diff --git a/arch/x86/include/asm/es7000/apicdef.h b/arch/x86/include/asm/es7000/apicdef.h
index e23791762a1..476da0c7f5c 100644
--- a/arch/x86/include/asm/es7000/apicdef.h
+++ b/arch/x86/include/asm/es7000/apicdef.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ES7000_APICDEF_H
 #define __ASM_ES7000_APICDEF_H
 
-#define		APIC_ID_MASK		(0xFF<<24)
+#define		ES7000_APIC_ID_MASK		(0xFF<<24)
 
 static inline unsigned int es7000_get_apic_id(unsigned long x)
 {
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
index e84d437ba2b..8318d121ea6 100644
--- a/arch/x86/include/asm/mach-default/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-default/mach_apicdef.h
@@ -4,10 +4,9 @@
 #include <asm/apic.h>
 
 #ifdef CONFIG_X86_64
-#define	APIC_ID_MASK		(apic->apic_id_mask)
 #define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
-#define		APIC_ID_MASK		(0xF<<24)
+#define		DEFAULT_APIC_ID_MASK	(0x0F<<24)
 
 static inline unsigned default_get_apic_id(unsigned long x) 
 {
diff --git a/arch/x86/include/asm/mach-generic/mach_apicdef.h b/arch/x86/include/asm/mach-generic/mach_apicdef.h
index 645520bcd2c..61caa65b13f 100644
--- a/arch/x86/include/asm/mach-generic/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-generic/mach_apicdef.h
@@ -3,8 +3,6 @@
 
 #ifndef APIC_DEFINITION
 #include <asm/genapic.h>
-
-#define APIC_ID_MASK (apic->apic_id_mask)
 #endif
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h
index 29f5e3d34e5..6f2cc5df0b1 100644
--- a/arch/x86/include/asm/numaq/apicdef.h
+++ b/arch/x86/include/asm/numaq/apicdef.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_NUMAQ_APICDEF_H
 #define __ASM_NUMAQ_APICDEF_H
 
-#define APIC_ID_MASK (0xF<<24)
+#define NUMAQ_APIC_ID_MASK (0xF<<24)
 
 static inline unsigned int numaq_get_apic_id(unsigned long x)
 {
diff --git a/arch/x86/include/asm/summit/apicdef.h b/arch/x86/include/asm/summit/apicdef.h
index 4286528af7c..0373f0c7b5d 100644
--- a/arch/x86/include/asm/summit/apicdef.h
+++ b/arch/x86/include/asm/summit/apicdef.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SUMMIT_APICDEF_H
 #define __ASM_SUMMIT_APICDEF_H
 
-#define		APIC_ID_MASK		(0xFF<<24)
+#define		SUMMIT_APIC_ID_MASK		(0xFF<<24)
 
 static inline unsigned summit_get_apic_id(unsigned long x)
 {
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 9d6374da478..5f7f3a9a47a 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1009,11 +1009,11 @@ int __init verify_local_APIC(void)
 	 */
 	reg0 = apic_read(APIC_ID);
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
+	apic_write(APIC_ID, reg0 ^ apic->apic_id_mask);
 	reg1 = apic_read(APIC_ID);
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
 	apic_write(APIC_ID, reg0);
-	if (reg1 != (reg0 ^ APIC_ID_MASK))
+	if (reg1 != (reg0 ^ apic->apic_id_mask))
 		return 0;
 
 	/*
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index ab47091dac2..78baa55cd0e 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -352,7 +352,7 @@ struct genapic apic_physflat =  {
 
 	.get_apic_id			= flat_get_apic_id,
 	.set_apic_id			= set_apic_id,
-	.apic_id_mask			= 0xFFu<<24,
+	.apic_id_mask			= 0xFFu << 24,
 
 	.cpu_mask_to_apicid		= physflat_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= physflat_cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 9eca977227c..1f4ad4f7702 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -92,7 +92,7 @@ struct genapic apic_bigsmp = {
 
 	.get_apic_id			= bigsmp_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= APIC_ID_MASK,
+	.apic_id_mask			= BIGSMP_APIC_ID_MASK,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index d51a3f0335a..239af25615b 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -73,7 +73,7 @@ struct genapic apic_default = {
 
 	.get_apic_id			= default_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= APIC_ID_MASK,
+	.apic_id_mask			= DEFAULT_APIC_ID_MASK,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 1944675db62..21fb33eea91 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -128,7 +128,7 @@ struct genapic apic_es7000 = {
 
 	.get_apic_id			= es7000_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= APIC_ID_MASK,
+	.apic_id_mask			= ES7000_APIC_ID_MASK,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index fcbba84c090..27d2d1f2d6f 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -92,7 +92,7 @@ struct genapic apic_numaq = {
 
 	.get_apic_id			= numaq_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= APIC_ID_MASK,
+	.apic_id_mask			= NUMAQ_APIC_ID_MASK,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 5650eaf9061..f24cba1b29d 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -72,7 +72,7 @@ struct genapic apic_summit = {
 
 	.get_apic_id			= summit_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= APIC_ID_MASK,
+	.apic_id_mask			= SUMMIT_APIC_ID_MASK,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
-- 
cgit v1.2.3


From 94af18755266edf46803564414d74f9621aaded8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 15:08:53 +0100
Subject: x86, apic: get rid of *_APIC_ID_MASK definitions

Impact: cleanup

Remove the *_APIC_ID_MASK subarch definitions and move them straight
to the genapic driver initialization code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apicdef.h            | 2 --
 arch/x86/include/asm/es7000/apicdef.h            | 2 --
 arch/x86/include/asm/mach-default/mach_apicdef.h | 1 -
 arch/x86/include/asm/numaq/apicdef.h             | 2 --
 arch/x86/include/asm/summit/apicdef.h            | 2 --
 arch/x86/mach-generic/bigsmp.c                   | 2 +-
 arch/x86/mach-generic/default.c                  | 2 +-
 arch/x86/mach-generic/es7000.c                   | 2 +-
 arch/x86/mach-generic/numaq.c                    | 2 +-
 arch/x86/mach-generic/summit.c                   | 2 +-
 10 files changed, 5 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apicdef.h b/arch/x86/include/asm/bigsmp/apicdef.h
index 6e587818c7e..e58dee84757 100644
--- a/arch/x86/include/asm/bigsmp/apicdef.h
+++ b/arch/x86/include/asm/bigsmp/apicdef.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_MACH_APICDEF_H
 #define __ASM_MACH_APICDEF_H
 
-#define		BIGSMP_APIC_ID_MASK		(0xFF<<24)
-
 static inline unsigned bigsmp_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0xFF;
diff --git a/arch/x86/include/asm/es7000/apicdef.h b/arch/x86/include/asm/es7000/apicdef.h
index 476da0c7f5c..c74881a7b3d 100644
--- a/arch/x86/include/asm/es7000/apicdef.h
+++ b/arch/x86/include/asm/es7000/apicdef.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_ES7000_APICDEF_H
 #define __ASM_ES7000_APICDEF_H
 
-#define		ES7000_APIC_ID_MASK		(0xFF<<24)
-
 static inline unsigned int es7000_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0xFF;
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
index 8318d121ea6..5141085962d 100644
--- a/arch/x86/include/asm/mach-default/mach_apicdef.h
+++ b/arch/x86/include/asm/mach-default/mach_apicdef.h
@@ -6,7 +6,6 @@
 #ifdef CONFIG_X86_64
 #define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
-#define		DEFAULT_APIC_ID_MASK	(0x0F<<24)
 
 static inline unsigned default_get_apic_id(unsigned long x) 
 {
diff --git a/arch/x86/include/asm/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h
index 6f2cc5df0b1..cd927d5bd50 100644
--- a/arch/x86/include/asm/numaq/apicdef.h
+++ b/arch/x86/include/asm/numaq/apicdef.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_NUMAQ_APICDEF_H
 #define __ASM_NUMAQ_APICDEF_H
 
-#define NUMAQ_APIC_ID_MASK (0xF<<24)
-
 static inline unsigned int numaq_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0x0F;
diff --git a/arch/x86/include/asm/summit/apicdef.h b/arch/x86/include/asm/summit/apicdef.h
index 0373f0c7b5d..c24b0df2dec 100644
--- a/arch/x86/include/asm/summit/apicdef.h
+++ b/arch/x86/include/asm/summit/apicdef.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_SUMMIT_APICDEF_H
 #define __ASM_SUMMIT_APICDEF_H
 
-#define		SUMMIT_APIC_ID_MASK		(0xFF<<24)
-
 static inline unsigned summit_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0xFF;
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 1f4ad4f7702..ee52c59aa3a 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -92,7 +92,7 @@ struct genapic apic_bigsmp = {
 
 	.get_apic_id			= bigsmp_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= BIGSMP_APIC_ID_MASK,
+	.apic_id_mask			= 0xFF << 24,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 239af25615b..e4ed7e6d626 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -73,7 +73,7 @@ struct genapic apic_default = {
 
 	.get_apic_id			= default_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= DEFAULT_APIC_ID_MASK,
+	.apic_id_mask			= 0x0F << 24,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 21fb33eea91..3d046dec0c9 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -128,7 +128,7 @@ struct genapic apic_es7000 = {
 
 	.get_apic_id			= es7000_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= ES7000_APIC_ID_MASK,
+	.apic_id_mask			= 0xFF << 24,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 27d2d1f2d6f..a7bf1aa02e1 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -92,7 +92,7 @@ struct genapic apic_numaq = {
 
 	.get_apic_id			= numaq_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= NUMAQ_APIC_ID_MASK,
+	.apic_id_mask			= 0x0F << 24,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index f24cba1b29d..a0ae6b91048 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -72,7 +72,7 @@ struct genapic apic_summit = {
 
 	.get_apic_id			= summit_get_apic_id,
 	.set_apic_id			= NULL,
-	.apic_id_mask			= SUMMIT_APIC_ID_MASK,
+	.apic_id_mask			= 0xFF << 24,
 
 	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
-- 
cgit v1.2.3


From debccb3e77be52cfc26c5a99e123c114c5c72aeb Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 15:20:18 +0100
Subject: x86, apic: refactor ->cpu_mask_to_apicid*()

- spread out the namespace on a per driver basis

 - clean up the functions

 - get rid of macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h            | 17 +++++++---------
 arch/x86/include/asm/es7000/apic.h            | 29 +++++++++++++++++----------
 arch/x86/include/asm/mach-default/mach_apic.h | 10 ++++-----
 arch/x86/include/asm/mach-generic/mach_apic.h |  2 --
 arch/x86/include/asm/numaq/apic.h             | 11 +++++-----
 arch/x86/include/asm/summit/apic.h            | 21 +++++++++++--------
 arch/x86/kernel/genapic_flat_64.c             |  4 +++-
 arch/x86/kernel/genx2apic_cluster.c           | 15 ++++++++------
 arch/x86/kernel/genx2apic_phys.c              | 15 ++++++++------
 arch/x86/kernel/genx2apic_uv_x.c              | 14 +++++++------
 arch/x86/kernel/io_apic.c                     | 21 ++++++++++---------
 arch/x86/mach-generic/bigsmp.c                |  4 ++--
 arch/x86/mach-generic/default.c               |  4 ++--
 arch/x86/mach-generic/es7000.c                |  6 +++---
 arch/x86/mach-generic/numaq.c                 |  4 ++--
 arch/x86/mach-generic/summit.c                |  4 ++--
 16 files changed, 101 insertions(+), 80 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
index 1230f5d7a38..ee29d66cd30 100644
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ b/arch/x86/include/asm/bigsmp/apic.h
@@ -105,18 +105,14 @@ static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
 }
 
 /* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
+static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	int cpu;
-	int apicid;	
-
-	cpu = first_cpu(*cpumask);
-	apicid = bigsmp_cpu_to_logical_apicid(cpu);
-	return apicid;
+	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
 }
 
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
+static inline unsigned int
+bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
 {
 	int cpu;
 
@@ -124,9 +120,10 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
 	 * May as well be the first.
 	 */
-	for_each_cpu_and(cpu, cpumask, andmask)
+	for_each_cpu_and(cpu, cpumask, andmask) {
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
+	}
 	if (cpu < nr_cpu_ids)
 		return bigsmp_cpu_to_logical_apicid(cpu);
 
diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
index f183dfb4de4..b89b45db735 100644
--- a/arch/x86/include/asm/es7000/apic.h
+++ b/arch/x86/include/asm/es7000/apic.h
@@ -137,12 +137,12 @@ static inline int es7000_check_phys_apicid_present(int cpu_physical_apicid)
 }
 
 static inline unsigned int
-cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
+es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 {
-	int num_bits_set;
 	int cpus_found = 0;
-	int cpu;
+	int num_bits_set;
 	int apicid;
+	int cpu;
 
 	num_bits_set = cpumask_weight(cpumask);
 	/* Return id to all */
@@ -154,12 +154,15 @@ cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 	 */
 	cpu = cpumask_first(cpumask);
 	apicid = es7000_cpu_to_logical_apicid(cpu);
+
 	while (cpus_found < num_bits_set) {
 		if (cpumask_test_cpu(cpu, cpumask)) {
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
 			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
+					apicid_cluster(new_apicid)) {
 				printk ("%s: Not a valid mask!\n", __func__);
+
 				return 0xFF;
 			}
 			apicid = new_apicid;
@@ -170,12 +173,12 @@ cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 	return apicid;
 }
 
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
+static inline unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	int num_bits_set;
 	int cpus_found = 0;
-	int cpu;
+	int num_bits_set;
 	int apicid;
+	int cpu;
 
 	num_bits_set = cpus_weight(*cpumask);
 	/* Return id to all */
@@ -190,9 +193,11 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 	while (cpus_found < num_bits_set) {
 		if (cpu_isset(cpu, *cpumask)) {
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
 			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
+					apicid_cluster(new_apicid)) {
 				printk ("%s: Not a valid mask!\n", __func__);
+
 				return es7000_cpu_to_logical_apicid(0);
 			}
 			apicid = new_apicid;
@@ -204,8 +209,9 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 }
 
 
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
-						  const struct cpumask *andmask)
+static inline unsigned int
+es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
 {
 	int apicid = es7000_cpu_to_logical_apicid(0);
 	cpumask_var_t cpumask;
@@ -215,9 +221,10 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 
 	cpumask_and(cpumask, inmask, andmask);
 	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = cpu_mask_to_apicid(cpumask);
+	apicid = es7000_cpu_mask_to_apicid(cpumask);
 
 	free_cpumask_var(cpumask);
+
 	return apicid;
 }
 
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 8719208f273..8972f843414 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -19,8 +19,6 @@ static inline const struct cpumask *default_target_cpus(void)
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
-#define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
 #define read_apic_id()  (apic->get_apic_id(apic_read(APIC_ID)))
 #define send_IPI_self (apic->send_IPI_self)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
@@ -49,13 +47,15 @@ static inline int default_apic_id_registered(void)
 	return physid_isset(read_apic_id(), phys_cpu_present_map);
 }
 
-static inline unsigned int cpu_mask_to_apicid(const struct cpumask *cpumask)
+static inline unsigned int
+default_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
 	return cpumask_bits(cpumask)[0];
 }
 
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
+static inline unsigned int
+default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			       const struct cpumask *andmask)
 {
 	unsigned long mask1 = cpumask_bits(cpumask)[0];
 	unsigned long mask2 = cpumask_bits(andmask)[0];
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index 1eeb5b61e48..ca460e45991 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,8 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define cpu_mask_to_apicid (apic->cpu_mask_to_apicid)
-#define cpu_mask_to_apicid_and (apic->cpu_mask_to_apicid_and)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 
 extern void generic_bigsmp_probe(void);
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
index 765c4d5124c..ce95e79f723 100644
--- a/arch/x86/include/asm/numaq/apic.h
+++ b/arch/x86/include/asm/numaq/apic.h
@@ -101,15 +101,16 @@ static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
  * We use physical apicids here, not logical, so just return the default
  * physical broadcast to stop people from breaking us
  */
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
+static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	return (int) 0xF;
+	return 0x0F;
 }
 
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
+static inline unsigned int
+numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			     const struct cpumask *andmask)
 {
-	return (int) 0xF;
+	return 0x0F;
 }
 
 /* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
index fa6b3b45290..15b8dbd19e1 100644
--- a/arch/x86/include/asm/summit/apic.h
+++ b/arch/x86/include/asm/summit/apic.h
@@ -125,29 +125,32 @@ static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
 	return 1;
 }
 
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
+static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	int num_bits_set;
 	int cpus_found = 0;
-	int cpu;
+	int num_bits_set;
 	int apicid;
+	int cpu;
 
 	num_bits_set = cpus_weight(*cpumask);
 	/* Return id to all */
 	if (num_bits_set >= nr_cpu_ids)
-		return (int) 0xFF;
+		return 0xFF;
 	/*
 	 * The cpus in the mask must all be on the apic cluster.  If are not
 	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = first_cpu(*cpumask);
 	apicid = summit_cpu_to_logical_apicid(cpu);
+
 	while (cpus_found < num_bits_set) {
 		if (cpu_isset(cpu, *cpumask)) {
 			int new_apicid = summit_cpu_to_logical_apicid(cpu);
+
 			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
+					apicid_cluster(new_apicid)) {
 				printk ("%s: Not a valid mask!\n", __func__);
+
 				return 0xFF;
 			}
 			apicid = apicid | new_apicid;
@@ -158,8 +161,9 @@ static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
 	return apicid;
 }
 
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
-						  const struct cpumask *andmask)
+static inline unsigned int
+summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
 {
 	int apicid = summit_cpu_to_logical_apicid(0);
 	cpumask_var_t cpumask;
@@ -169,9 +173,10 @@ static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
 
 	cpumask_and(cpumask, inmask, andmask);
 	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = cpu_mask_to_apicid(cpumask);
+	apicid = summit_cpu_mask_to_apicid(cpumask);
 
 	free_cpumask_var(cpumask);
+
 	return apicid;
 }
 
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 78baa55cd0e..b941b112caf 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -309,11 +309,13 @@ physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
 	 * May as well be the first.
 	 */
-	for_each_cpu_and(cpu, cpumask, andmask)
+	for_each_cpu_and(cpu, cpumask, andmask) {
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
+	}
 	if (cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
+
 	return BAD_APICID;
 }
 
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index c7557e05184..62f9fccf01d 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -111,21 +111,21 @@ static int x2apic_apic_id_registered(void)
 
 static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
-	int cpu;
-
 	/*
 	 * We're using fixed IRQ delivery, can only return one logical APIC ID.
 	 * May as well be the first.
 	 */
-	cpu = cpumask_first(cpumask);
+	int cpu = cpumask_first(cpumask);
+
 	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_logical_apicid, cpu);
 	else
 		return BAD_APICID;
 }
 
-static unsigned int x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
+static unsigned int
+x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
 {
 	int cpu;
 
@@ -133,11 +133,14 @@ static unsigned int x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	 * We're using fixed IRQ delivery, can only return one logical APIC ID.
 	 * May as well be the first.
 	 */
-	for_each_cpu_and(cpu, cpumask, andmask)
+	for_each_cpu_and(cpu, cpumask, andmask) {
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
+	}
+
 	if (cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_logical_apicid, cpu);
+
 	return BAD_APICID;
 }
 
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 80cba49cfd8..3da1675b260 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -110,21 +110,21 @@ static int x2apic_apic_id_registered(void)
 
 static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
-	int cpu;
-
 	/*
 	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
 	 * May as well be the first.
 	 */
-	cpu = cpumask_first(cpumask);
+	int cpu = cpumask_first(cpumask);
+
 	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
 }
 
-static unsigned int x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						  const struct cpumask *andmask)
+static unsigned int
+x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
 {
 	int cpu;
 
@@ -132,11 +132,14 @@ static unsigned int x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
 	 * May as well be the first.
 	 */
-	for_each_cpu_and(cpu, cpumask, andmask)
+	for_each_cpu_and(cpu, cpumask, andmask) {
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
+	}
+
 	if (cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
+
 	return BAD_APICID;
 }
 
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 50310b96adc..f957878c21e 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -171,21 +171,21 @@ static void uv_init_apic_ldr(void)
 
 static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
 {
-	int cpu;
-
 	/*
 	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
 	 * May as well be the first.
 	 */
-	cpu = cpumask_first(cpumask);
+	int cpu = cpumask_first(cpumask);
+
 	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
 }
 
-static unsigned int uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-					      const struct cpumask *andmask)
+static unsigned int
+uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			  const struct cpumask *andmask)
 {
 	int cpu;
 
@@ -193,11 +193,13 @@ static unsigned int uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
 	 * May as well be the first.
 	 */
-	for_each_cpu_and(cpu, cpumask, andmask)
+	for_each_cpu_and(cpu, cpumask, andmask) {
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
+	}
 	if (cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
+
 	return BAD_APICID;
 }
 
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 3d85d3d810b..01a2505d727 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -563,8 +563,9 @@ static int
 assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
 
 /*
- * Either sets desc->affinity to a valid value, and returns cpu_mask_to_apicid
- * of that, or returns BAD_APICID and leaves desc->affinity untouched.
+ * Either sets desc->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
+ * leaves desc->affinity untouched.
  */
 static unsigned int
 set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
@@ -582,7 +583,8 @@ set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
 
 	cpumask_and(desc->affinity, cfg->domain, mask);
 	set_extra_move_desc(desc, mask);
-	return cpu_mask_to_apicid_and(desc->affinity, cpu_online_mask);
+
+	return apic->cpu_mask_to_apicid_and(desc->affinity, cpu_online_mask);
 }
 
 static void
@@ -1562,7 +1564,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
 	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
 		return;
 
-	dest = cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 	apic_printk(APIC_VERBOSE,KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
@@ -1666,7 +1668,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
 	 */
 	entry.dest_mode = apic->irq_dest_mode;
 	entry.mask = 1;					/* mask IRQ now */
-	entry.dest = cpu_mask_to_apicid(apic->target_cpus());
+	entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus());
 	entry.delivery_mode = apic->irq_delivery_mode;
 	entry.polarity = 0;
 	entry.trigger = 0;
@@ -2367,7 +2369,7 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
 
 	set_extra_move_desc(desc, mask);
 
-	dest = cpu_mask_to_apicid_and(cfg->domain, mask);
+	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
 
 	modify_ioapic_rte = desc->status & IRQ_LEVEL;
 	if (modify_ioapic_rte) {
@@ -3270,7 +3272,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 	if (err)
 		return err;
 
-	dest = cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 #ifdef CONFIG_INTR_REMAP
 	if (irq_remapped(irq)) {
@@ -3708,7 +3710,8 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 		struct ht_irq_msg msg;
 		unsigned dest;
 
-		dest = cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+		dest = apic->cpu_mask_to_apicid_and(cfg->domain,
+						    apic->target_cpus());
 
 		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
 
@@ -3773,7 +3776,7 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	entry->polarity = 0;
 	entry->trigger = 0;
 	entry->mask = 0;
-	entry->dest = cpu_mask_to_apicid(eligible_cpu);
+	entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
 
 	mmr_pnode = uv_blade_to_pnode(mmr_blade);
 	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index ee52c59aa3a..22c2c7b8e4a 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -94,8 +94,8 @@ struct genapic apic_bigsmp = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0xFF << 24,
 
-	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index e4ed7e6d626..477ebec1674 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -75,8 +75,8 @@ struct genapic apic_default = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0x0F << 24,
 
-	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 3d046dec0c9..d758cf65d73 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -26,7 +26,7 @@ void __init es7000_update_genapic_to_cluster(void)
 
 	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
 
-	apic->cpu_mask_to_apicid = cpu_mask_to_apicid_cluster;
+	apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster;
 }
 
 static int probe_es7000(void)
@@ -130,8 +130,8 @@ struct genapic apic_es7000 = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0xFF << 24,
 
-	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index a7bf1aa02e1..eb7d56a521d 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -94,8 +94,8 @@ struct genapic apic_numaq = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0x0F << 24,
 
-	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index a0ae6b91048..8c293055bdf 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -74,8 +74,8 @@ struct genapic apic_summit = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0xFF << 24,
 
-	.cpu_mask_to_apicid		= cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= cpu_mask_to_apicid_and,
+	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
-- 
cgit v1.2.3


From dac5f4121df3c39fdb2ea57acd669a0ae19e46f8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 15:42:24 +0100
Subject: x86, apic: untangle the send_IPI_*() jungle

Our send_IPI_*() methods and definitions are a twisted mess: the same
symbol is defined to different things depending on .config details,
in a non-transparent way.

 - spread out the quirks into separately named per apic driver methods

 - prefix the standard PC methods with default_

 - get rid of wrapper macro obfuscation

 - clean up various details

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/ipi.h             | 16 +++++------
 arch/x86/include/asm/es7000/ipi.h             | 16 +++++------
 arch/x86/include/asm/hw_irq.h                 |  4 +--
 arch/x86/include/asm/ipi.h                    | 38 +++++++++++++------------
 arch/x86/include/asm/mach-default/mach_apic.h |  1 -
 arch/x86/include/asm/mach-default/mach_ipi.h  | 40 ++++++++++++---------------
 arch/x86/include/asm/mach-generic/mach_ipi.h  |  4 ---
 arch/x86/include/asm/numaq/ipi.h              | 16 +++++------
 arch/x86/include/asm/summit/ipi.h             | 16 +++++------
 arch/x86/kernel/apic.c                        |  2 +-
 arch/x86/kernel/genapic_64.c                  |  2 +-
 arch/x86/kernel/genapic_flat_64.c             | 24 +++++++++-------
 arch/x86/kernel/genx2apic_cluster.c           | 38 +++++++++++++------------
 arch/x86/kernel/genx2apic_phys.c              | 36 ++++++++++--------------
 arch/x86/kernel/genx2apic_uv_x.c              | 21 ++++++++------
 arch/x86/kernel/io_apic.c                     | 10 +++----
 arch/x86/kernel/ipi.c                         | 28 ++++++++++---------
 arch/x86/kernel/kgdb.c                        |  2 +-
 arch/x86/kernel/reboot.c                      |  2 +-
 arch/x86/kernel/smp.c                         | 10 +++----
 arch/x86/mach-generic/bigsmp.c                |  6 ++--
 arch/x86/mach-generic/default.c               |  6 ++--
 arch/x86/mach-generic/es7000.c                |  6 ++--
 arch/x86/mach-generic/numaq.c                 |  6 ++--
 arch/x86/mach-generic/summit.c                |  6 ++--
 arch/x86/mm/tlb.c                             |  2 +-
 26 files changed, 178 insertions(+), 180 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/ipi.h b/arch/x86/include/asm/bigsmp/ipi.h
index 27fcd01b3ae..a91db69cda6 100644
--- a/arch/x86/include/asm/bigsmp/ipi.h
+++ b/arch/x86/include/asm/bigsmp/ipi.h
@@ -1,22 +1,22 @@
 #ifndef __ASM_MACH_IPI_H
 #define __ASM_MACH_IPI_H
 
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
 
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
+static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence(mask, vector);
 }
 
-static inline void send_IPI_allbutself(int vector)
+static inline void bigsmp_send_IPI_allbutself(int vector)
 {
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
 }
 
-static inline void send_IPI_all(int vector)
+static inline void bigsmp_send_IPI_all(int vector)
 {
-	send_IPI_mask(cpu_online_mask, vector);
+	default_send_IPI_mask(cpu_online_mask, vector);
 }
 
 #endif /* __ASM_MACH_IPI_H */
diff --git a/arch/x86/include/asm/es7000/ipi.h b/arch/x86/include/asm/es7000/ipi.h
index 7e8ed24d4b8..81e77c812ba 100644
--- a/arch/x86/include/asm/es7000/ipi.h
+++ b/arch/x86/include/asm/es7000/ipi.h
@@ -1,22 +1,22 @@
 #ifndef __ASM_ES7000_IPI_H
 #define __ASM_ES7000_IPI_H
 
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
 
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
+static inline void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence(mask, vector);
 }
 
-static inline void send_IPI_allbutself(int vector)
+static inline void es7000_send_IPI_allbutself(int vector)
 {
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
 }
 
-static inline void send_IPI_all(int vector)
+static inline void es7000_send_IPI_all(int vector)
 {
-	send_IPI_mask(cpu_online_mask, vector);
+	es7000_send_IPI_mask(cpu_online_mask, vector);
 }
 
 #endif /* __ASM_ES7000_IPI_H */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 8de644b6b95..bfa921fad13 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -73,9 +73,9 @@ extern void enable_IO_APIC(void);
 
 /* IPI functions */
 #ifdef CONFIG_X86_32
-extern void send_IPI_self(int vector);
+extern void default_send_IPI_self(int vector);
 #endif
-extern void send_IPI(int dest, int vector);
+extern void default_send_IPI(int dest, int vector);
 
 /* Statistics */
 extern atomic_t irq_err_count;
diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index c745a306f7d..a8d717f2c7e 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -55,8 +55,9 @@ static inline void __xapic_wait_icr_idle(void)
 		cpu_relax();
 }
 
-static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
-				       unsigned int dest)
+static inline void
+__default_send_IPI_shortcut(unsigned int shortcut,
+			    int vector, unsigned int dest)
 {
 	/*
 	 * Subtle. In the case of the 'never do double writes' workaround
@@ -87,8 +88,8 @@ static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
  * This is used to send an IPI with no shorthand notation (the destination is
  * specified in bits 56 to 63 of the ICR).
  */
-static inline void __send_IPI_dest_field(unsigned int mask, int vector,
-					 unsigned int dest)
+static inline void
+ __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest)
 {
 	unsigned long cfg;
 
@@ -117,11 +118,11 @@ static inline void __send_IPI_dest_field(unsigned int mask, int vector,
 	native_apic_mem_write(APIC_ICR, cfg);
 }
 
-static inline void send_IPI_mask_sequence(const struct cpumask *mask,
-					  int vector)
+static inline void
+default_send_IPI_mask_sequence(const struct cpumask *mask, int vector)
 {
-	unsigned long flags;
 	unsigned long query_cpu;
+	unsigned long flags;
 
 	/*
 	 * Hack. The clustered APIC addressing mode doesn't allow us to send
@@ -130,27 +131,28 @@ static inline void send_IPI_mask_sequence(const struct cpumask *mask,
 	 */
 	local_irq_save(flags);
 	for_each_cpu(query_cpu, mask) {
-		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
-				      vector, APIC_DEST_PHYSICAL);
+		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
+				query_cpu), vector, APIC_DEST_PHYSICAL);
 	}
 	local_irq_restore(flags);
 }
 
-static inline void send_IPI_mask_allbutself(const struct cpumask *mask,
-					    int vector)
+static inline void
+default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long flags;
-	unsigned int query_cpu;
 	unsigned int this_cpu = smp_processor_id();
+	unsigned int query_cpu;
+	unsigned long flags;
 
 	/* See Hack comment above */
 
 	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		if (query_cpu != this_cpu)
-			__send_IPI_dest_field(
-				per_cpu(x86_cpu_to_apicid, query_cpu),
-				vector, APIC_DEST_PHYSICAL);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
+				 query_cpu), vector, APIC_DEST_PHYSICAL);
+	}
 	local_irq_restore(flags);
 }
 
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 8972f843414..2e4104cf348 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -20,7 +20,6 @@ static inline const struct cpumask *default_target_cpus(void)
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
 #define read_apic_id()  (apic->get_apic_id(apic_read(APIC_ID)))
-#define send_IPI_self (apic->send_IPI_self)
 #define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void default_setup_apic_routing(void);
 #else
diff --git a/arch/x86/include/asm/mach-default/mach_ipi.h b/arch/x86/include/asm/mach-default/mach_ipi.h
index 089399643df..85dec630c69 100644
--- a/arch/x86/include/asm/mach-default/mach_ipi.h
+++ b/arch/x86/include/asm/mach-default/mach_ipi.h
@@ -4,45 +4,40 @@
 /* Avoid include hell */
 #define NMI_VECTOR 0x02
 
-void send_IPI_mask_bitmask(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-void __send_IPI_shortcut(unsigned int shortcut, int vector);
+void default_send_IPI_mask_bitmask(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+void __default_send_IPI_shortcut(unsigned int shortcut, int vector);
 
 extern int no_broadcast;
 
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
-#define send_IPI_mask (apic->send_IPI_mask)
-#define send_IPI_mask_allbutself (apic->send_IPI_mask_allbutself)
 #else
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
+static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	send_IPI_mask_bitmask(mask, vector);
+	default_send_IPI_mask_bitmask(mask, vector);
 }
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
 #endif
 
-static inline void __local_send_IPI_allbutself(int vector)
+static inline void __default_local_send_IPI_allbutself(int vector)
 {
 	if (no_broadcast || vector == NMI_VECTOR)
-		send_IPI_mask_allbutself(cpu_online_mask, vector);
+		apic->send_IPI_mask_allbutself(cpu_online_mask, vector);
 	else
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
+		__default_send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
 }
 
-static inline void __local_send_IPI_all(int vector)
+static inline void __default_local_send_IPI_all(int vector)
 {
 	if (no_broadcast || vector == NMI_VECTOR)
-		send_IPI_mask(cpu_online_mask, vector);
+		apic->send_IPI_mask(cpu_online_mask, vector);
 	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
+		__default_send_IPI_shortcut(APIC_DEST_ALLINC, vector);
 }
 
-#ifdef CONFIG_X86_64
-#define send_IPI_allbutself (apic->send_IPI_allbutself)
-#define send_IPI_all (apic->send_IPI_all)
-#else
-static inline void send_IPI_allbutself(int vector)
+#ifdef CONFIG_X86_32
+static inline void default_send_IPI_allbutself(int vector)
 {
 	/*
 	 * if there are no other CPUs in the system then we get an APIC send 
@@ -51,13 +46,12 @@ static inline void send_IPI_allbutself(int vector)
 	if (!(num_online_cpus() > 1))
 		return;
 
-	__local_send_IPI_allbutself(vector);
-	return;
+	__default_local_send_IPI_allbutself(vector);
 }
 
-static inline void send_IPI_all(int vector)
+static inline void default_send_IPI_all(int vector)
 {
-	__local_send_IPI_all(vector);
+	__default_local_send_IPI_all(vector);
 }
 #endif
 
diff --git a/arch/x86/include/asm/mach-generic/mach_ipi.h b/arch/x86/include/asm/mach-generic/mach_ipi.h
index 75e54bd6cbd..5691c09645c 100644
--- a/arch/x86/include/asm/mach-generic/mach_ipi.h
+++ b/arch/x86/include/asm/mach-generic/mach_ipi.h
@@ -3,8 +3,4 @@
 
 #include <asm/genapic.h>
 
-#define send_IPI_mask (apic->send_IPI_mask)
-#define send_IPI_allbutself (apic->send_IPI_allbutself)
-#define send_IPI_all (apic->send_IPI_all)
-
 #endif /* _ASM_X86_MACH_GENERIC_MACH_IPI_H */
diff --git a/arch/x86/include/asm/numaq/ipi.h b/arch/x86/include/asm/numaq/ipi.h
index a8374c65277..5dbc4b4cd5e 100644
--- a/arch/x86/include/asm/numaq/ipi.h
+++ b/arch/x86/include/asm/numaq/ipi.h
@@ -1,22 +1,22 @@
 #ifndef __ASM_NUMAQ_IPI_H
 #define __ASM_NUMAQ_IPI_H
 
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
 
-static inline void send_IPI_mask(const struct cpumask *mask, int vector)
+static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence(mask, vector);
 }
 
-static inline void send_IPI_allbutself(int vector)
+static inline void numaq_send_IPI_allbutself(int vector)
 {
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
 }
 
-static inline void send_IPI_all(int vector)
+static inline void numaq_send_IPI_all(int vector)
 {
-	send_IPI_mask(cpu_online_mask, vector);
+	numaq_send_IPI_mask(cpu_online_mask, vector);
 }
 
 #endif /* __ASM_NUMAQ_IPI_H */
diff --git a/arch/x86/include/asm/summit/ipi.h b/arch/x86/include/asm/summit/ipi.h
index a8a2c24f50c..f87a43fe0ae 100644
--- a/arch/x86/include/asm/summit/ipi.h
+++ b/arch/x86/include/asm/summit/ipi.h
@@ -1,26 +1,26 @@
 #ifndef __ASM_SUMMIT_IPI_H
 #define __ASM_SUMMIT_IPI_H
 
-void send_IPI_mask_sequence(const cpumask_t *mask, int vector);
-void send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
+void default_send_IPI_mask_sequence(const cpumask_t *mask, int vector);
+void default_send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
 
-static inline void send_IPI_mask(const cpumask_t *mask, int vector)
+static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
 {
-	send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence(mask, vector);
 }
 
-static inline void send_IPI_allbutself(int vector)
+static inline void summit_send_IPI_allbutself(int vector)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
 
 	if (!cpus_empty(mask))
-		send_IPI_mask(&mask, vector);
+		summit_send_IPI_mask(&mask, vector);
 }
 
-static inline void send_IPI_all(int vector)
+static inline void summit_send_IPI_all(int vector)
 {
-	send_IPI_mask(&cpu_online_map, vector);
+	summit_send_IPI_mask(&cpu_online_map, vector);
 }
 
 #endif /* __ASM_SUMMIT_IPI_H */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 5f7f3a9a47a..84b8e7c57ab 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -475,7 +475,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 static void lapic_timer_broadcast(const struct cpumask *mask)
 {
 #ifdef CONFIG_SMP
-	send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
+	apic->send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
 #endif
 }
 
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index d57d2138f07..820dea5d0eb 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -65,7 +65,7 @@ void __init default_setup_apic_routing(void)
 
 void apic_send_IPI_self(int vector)
 {
-	__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
 }
 
 int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index b941b112caf..7c648ccea51 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -74,7 +74,7 @@ static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	__send_IPI_dest_field(mask, vector, apic->dest_logical);
+	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
 	local_irq_restore(flags);
 }
 
@@ -85,14 +85,15 @@ static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
 	_flat_send_IPI_mask(mask, vector);
 }
 
-static void flat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
-					  int vector)
+static void
+ flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
 {
 	unsigned long mask = cpumask_bits(cpumask)[0];
 	int cpu = smp_processor_id();
 
 	if (cpu < BITS_PER_LONG)
 		clear_bit(cpu, &mask);
+
 	_flat_send_IPI_mask(mask, vector);
 }
 
@@ -114,16 +115,19 @@ static void flat_send_IPI_allbutself(int vector)
 			_flat_send_IPI_mask(mask, vector);
 		}
 	} else if (num_online_cpus() > 1) {
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->dest_logical);
+		__default_send_IPI_shortcut(APIC_DEST_ALLBUT,
+					    vector, apic->dest_logical);
 	}
 }
 
 static void flat_send_IPI_all(int vector)
 {
-	if (vector == NMI_VECTOR)
+	if (vector == NMI_VECTOR) {
 		flat_send_IPI_mask(cpu_online_mask, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->dest_logical);
+	} else {
+		__default_send_IPI_shortcut(APIC_DEST_ALLINC,
+					    vector, apic->dest_logical);
+	}
 }
 
 static unsigned int flat_get_apic_id(unsigned long x)
@@ -265,18 +269,18 @@ static void physflat_vector_allocation_domain(int cpu, struct cpumask *retmask)
 
 static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
 {
-	send_IPI_mask_sequence(cpumask, vector);
+	default_send_IPI_mask_sequence(cpumask, vector);
 }
 
 static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
 					      int vector)
 {
-	send_IPI_mask_allbutself(cpumask, vector);
+	default_send_IPI_mask_allbutself(cpumask, vector);
 }
 
 static void physflat_send_IPI_allbutself(int vector)
 {
-	send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
 }
 
 static void physflat_send_IPI_all(int vector)
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 62f9fccf01d..2d97726a973 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -36,8 +36,8 @@ static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
 	cpumask_set_cpu(cpu, retmask);
 }
 
-static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
-				   unsigned int dest)
+static void
+ __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
 {
 	unsigned long cfg;
 
@@ -57,45 +57,50 @@ static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
  */
 static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	unsigned long flags;
 	unsigned long query_cpu;
+	unsigned long flags;
 
 	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
+	for_each_cpu(query_cpu, mask) {
 		__x2apic_send_IPI_dest(
 			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
 			vector, apic->dest_logical);
+	}
 	local_irq_restore(flags);
 }
 
-static void x2apic_send_IPI_mask_allbutself(const struct cpumask *mask,
-					    int vector)
+static void
+ x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long flags;
-	unsigned long query_cpu;
 	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
 
 	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		if (query_cpu != this_cpu)
-			__x2apic_send_IPI_dest(
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__x2apic_send_IPI_dest(
 				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
 				vector, apic->dest_logical);
+	}
 	local_irq_restore(flags);
 }
 
 static void x2apic_send_IPI_allbutself(int vector)
 {
-	unsigned long flags;
-	unsigned long query_cpu;
 	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
 
 	local_irq_save(flags);
-	for_each_online_cpu(query_cpu)
-		if (query_cpu != this_cpu)
-			__x2apic_send_IPI_dest(
+	for_each_online_cpu(query_cpu) {
+		if (query_cpu == this_cpu)
+			continue;
+		__x2apic_send_IPI_dest(
 				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
 				vector, apic->dest_logical);
+	}
 	local_irq_restore(flags);
 }
 
@@ -175,7 +180,6 @@ static void init_x2apic_ldr(void)
 	int cpu = smp_processor_id();
 
 	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
-	return;
 }
 
 struct genapic apic_x2apic_cluster = {
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 3da1675b260..74777c27669 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -55,8 +55,8 @@ static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
 
 static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	unsigned long flags;
 	unsigned long query_cpu;
+	unsigned long flags;
 
 	local_irq_save(flags);
 	for_each_cpu(query_cpu, mask) {
@@ -66,12 +66,12 @@ static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
 	local_irq_restore(flags);
 }
 
-static void x2apic_send_IPI_mask_allbutself(const struct cpumask *mask,
-					    int vector)
+static void
+ x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned long flags;
-	unsigned long query_cpu;
 	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
 
 	local_irq_save(flags);
 	for_each_cpu(query_cpu, mask) {
@@ -85,16 +85,17 @@ static void x2apic_send_IPI_mask_allbutself(const struct cpumask *mask,
 
 static void x2apic_send_IPI_allbutself(int vector)
 {
-	unsigned long flags;
-	unsigned long query_cpu;
 	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
 
 	local_irq_save(flags);
-	for_each_online_cpu(query_cpu)
-		if (query_cpu != this_cpu)
-			__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_apicid, query_cpu),
-				vector, APIC_DEST_PHYSICAL);
+	for_each_online_cpu(query_cpu) {
+		if (query_cpu == this_cpu)
+			continue;
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
+				       vector, APIC_DEST_PHYSICAL);
+	}
 	local_irq_restore(flags);
 }
 
@@ -145,18 +146,12 @@ x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 
 static unsigned int x2apic_phys_get_apic_id(unsigned long x)
 {
-	unsigned int id;
-
-	id = x;
-	return id;
+	return x;
 }
 
 static unsigned long set_apic_id(unsigned int id)
 {
-	unsigned long x;
-
-	x = id;
-	return x;
+	return id;
 }
 
 static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
@@ -171,7 +166,6 @@ static void x2apic_send_IPI_self(int vector)
 
 static void init_x2apic_ldr(void)
 {
-	return;
 }
 
 struct genapic apic_x2apic_phys = {
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index f957878c21e..24b9f42db9b 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -118,12 +118,13 @@ static void uv_send_IPI_one(int cpu, int vector)
 	int pnode;
 
 	apicid = per_cpu(x86_cpu_to_apicid, cpu);
-	lapicid = apicid & 0x3f;		/* ZZZ macro needed */
+	lapicid = apicid & 0x3f; /* ZZZ macro needed */
 	pnode = uv_apicid_to_pnode(apicid);
-	val =
-	    (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid <<
-					      UVH_IPI_INT_APIC_ID_SHFT) |
-	    (vector << UVH_IPI_INT_VECTOR_SHFT);
+
+	val = (     1UL << UVH_IPI_INT_SEND_SHFT    ) |
+	      ( lapicid << UVH_IPI_INT_APIC_ID_SHFT ) |
+	      (  vector << UVH_IPI_INT_VECTOR_SHFT  );
+
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
 
@@ -137,22 +138,24 @@ static void uv_send_IPI_mask(const struct cpumask *mask, int vector)
 
 static void uv_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
-	unsigned int cpu;
 	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
 
-	for_each_cpu(cpu, mask)
+	for_each_cpu(cpu, mask) {
 		if (cpu != this_cpu)
 			uv_send_IPI_one(cpu, vector);
+	}
 }
 
 static void uv_send_IPI_allbutself(int vector)
 {
-	unsigned int cpu;
 	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
 
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
 		if (cpu != this_cpu)
 			uv_send_IPI_one(cpu, vector);
+	}
 }
 
 static void uv_send_IPI_all(int vector)
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 01a2505d727..e90970ce21a 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -514,11 +514,11 @@ static void send_cleanup_vector(struct irq_cfg *cfg)
 		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
 			cfg->move_cleanup_count++;
 		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
+			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
 	} else {
 		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
 		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
-		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
 		free_cpumask_var(cleanup_mask);
 	}
 	cfg->move_in_progress = 0;
@@ -800,7 +800,7 @@ static void clear_IO_APIC (void)
 }
 
 #if !defined(CONFIG_SMP) && defined(CONFIG_X86_32)
-void send_IPI_self(int vector)
+void default_send_IPI_self(int vector)
 {
 	unsigned int cfg;
 
@@ -2297,7 +2297,7 @@ static int ioapic_retrigger_irq(unsigned int irq)
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector);
+	apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
@@ -2305,7 +2305,7 @@ static int ioapic_retrigger_irq(unsigned int irq)
 #else
 static int ioapic_retrigger_irq(unsigned int irq)
 {
-	send_IPI_self(irq_cfg(irq)->vector);
+	apic->send_IPI_self(irq_cfg(irq)->vector);
 
 	return 1;
 }
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 367c5e684fa..e16c41b2e4e 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -48,7 +48,7 @@ static inline int __prepare_ICR2(unsigned int mask)
 	return SET_APIC_DEST_FIELD(mask);
 }
 
-void __send_IPI_shortcut(unsigned int shortcut, int vector)
+void __default_send_IPI_shortcut(unsigned int shortcut, int vector)
 {
 	/*
 	 * Subtle. In the case of the 'never do double writes' workaround
@@ -75,16 +75,16 @@ void __send_IPI_shortcut(unsigned int shortcut, int vector)
 	apic_write(APIC_ICR, cfg);
 }
 
-void send_IPI_self(int vector)
+void default_send_IPI_self(int vector)
 {
-	__send_IPI_shortcut(APIC_DEST_SELF, vector);
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector);
 }
 
 /*
  * This is used to send an IPI with no shorthand notation (the destination is
  * specified in bits 56 to 63 of the ICR).
  */
-static inline void __send_IPI_dest_field(unsigned long mask, int vector)
+static inline void __default_send_IPI_dest_field(unsigned long mask, int vector)
 {
 	unsigned long cfg;
 
@@ -116,18 +116,18 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 /*
  * This is only used on smaller machines.
  */
-void send_IPI_mask_bitmask(const struct cpumask *cpumask, int vector)
+void default_send_IPI_mask_bitmask(const struct cpumask *cpumask, int vector)
 {
 	unsigned long mask = cpumask_bits(cpumask)[0];
 	unsigned long flags;
 
 	local_irq_save(flags);
 	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
-	__send_IPI_dest_field(mask, vector);
+	__default_send_IPI_dest_field(mask, vector);
 	local_irq_restore(flags);
 }
 
-void send_IPI_mask_sequence(const struct cpumask *mask, int vector)
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector)
 {
 	unsigned long flags;
 	unsigned int query_cpu;
@@ -140,11 +140,11 @@ void send_IPI_mask_sequence(const struct cpumask *mask, int vector)
 
 	local_irq_save(flags);
 	for_each_cpu(query_cpu, mask)
-		__send_IPI_dest_field(apic->cpu_to_logical_apicid(query_cpu), vector);
+		__default_send_IPI_dest_field(apic->cpu_to_logical_apicid(query_cpu), vector);
 	local_irq_restore(flags);
 }
 
-void send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 {
 	unsigned long flags;
 	unsigned int query_cpu;
@@ -153,10 +153,12 @@ void send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 	/* See Hack comment above */
 
 	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		if (query_cpu != this_cpu)
-			__send_IPI_dest_field(apic->cpu_to_logical_apicid(query_cpu),
-					      vector);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector);
+	}
 	local_irq_restore(flags);
 }
 
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 10435a120d2..b62a3811e01 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -347,7 +347,7 @@ void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
  */
 void kgdb_roundup_cpus(unsigned long flags)
 {
-	send_IPI_allbutself(APIC_DM_NMI);
+	apic->send_IPI_allbutself(APIC_DM_NMI);
 }
 #endif
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f8536fee5c1..38dace28d62 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -651,7 +651,7 @@ static int crash_nmi_callback(struct notifier_block *self,
 
 static void smp_send_nmi_allbutself(void)
 {
-	send_IPI_allbutself(NMI_VECTOR);
+	apic->send_IPI_allbutself(NMI_VECTOR);
 }
 
 static struct notifier_block crash_nmi_nb = {
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index e6faa3316bd..c48ba6cc32a 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -118,12 +118,12 @@ static void native_smp_send_reschedule(int cpu)
 		WARN_ON(1);
 		return;
 	}
-	send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR);
+	apic->send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR);
 }
 
 void native_send_call_func_single_ipi(int cpu)
 {
-	send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR);
+	apic->send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR);
 }
 
 void native_send_call_func_ipi(const struct cpumask *mask)
@@ -131,7 +131,7 @@ void native_send_call_func_ipi(const struct cpumask *mask)
 	cpumask_var_t allbutself;
 
 	if (!alloc_cpumask_var(&allbutself, GFP_ATOMIC)) {
-		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
+		apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
 		return;
 	}
 
@@ -140,9 +140,9 @@ void native_send_call_func_ipi(const struct cpumask *mask)
 
 	if (cpumask_equal(mask, allbutself) &&
 	    cpumask_equal(cpu_online_mask, cpu_callout_mask))
-		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+		apic->send_IPI_allbutself(CALL_FUNCTION_VECTOR);
 	else
-		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
+		apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
 
 	free_cpumask_var(allbutself);
 }
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 22c2c7b8e4a..4782b554788 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -97,10 +97,10 @@ struct genapic apic_bigsmp = {
 	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask			= default_send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= send_IPI_allbutself,
-	.send_IPI_all			= send_IPI_all,
+	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
+	.send_IPI_all			= bigsmp_send_IPI_all,
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 477ebec1674..bf4670db25f 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -78,10 +78,10 @@ struct genapic apic_default = {
 	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask			= default_send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= send_IPI_allbutself,
-	.send_IPI_all			= send_IPI_all,
+	.send_IPI_allbutself		= default_send_IPI_allbutself,
+	.send_IPI_all			= default_send_IPI_all,
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index d758cf65d73..d36642e6d90 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -133,10 +133,10 @@ struct genapic apic_es7000 = {
 	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask			= es7000_send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= send_IPI_allbutself,
-	.send_IPI_all			= send_IPI_all,
+	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
+	.send_IPI_all			= es7000_send_IPI_all,
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index eb7d56a521d..135b1832ad8 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -97,10 +97,10 @@ struct genapic apic_numaq = {
 	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask			= numaq_send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= send_IPI_allbutself,
-	.send_IPI_all			= send_IPI_all,
+	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
+	.send_IPI_all			= numaq_send_IPI_all,
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 8c293055bdf..77196a4a9d2 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -77,10 +77,10 @@ struct genapic apic_summit = {
 	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= send_IPI_mask,
+	.send_IPI_mask			= summit_send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= send_IPI_allbutself,
-	.send_IPI_all			= send_IPI_all,
+	.send_IPI_allbutself		= summit_send_IPI_allbutself,
+	.send_IPI_all			= summit_send_IPI_all,
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 72a6d4ebe34..6348e114692 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -196,7 +196,7 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 	 * We have to send the IPI only to
 	 * CPUs affected.
 	 */
-	send_IPI_mask(to_cpumask(f->flush_cpumask),
+	apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
 		      INVALIDATE_TLB_VECTOR_START + sender);
 
 	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
-- 
cgit v1.2.3


From 6f177c01db6b865181fbc6c948381b290ee09718 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:09:23 +0100
Subject: x86, smp: clean up ->trampoline_phys_low/high handling

- spread out the namespace on a per apic driver basis

 - remove wrapper macros

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/wakecpu.h             |  4 ++--
 arch/x86/include/asm/mach-default/mach_wakecpu.h  |  4 ++--
 arch/x86/include/asm/mach-default/smpboot_hooks.h |  6 +++---
 arch/x86/include/asm/mach-generic/mach_wakecpu.h  |  2 --
 arch/x86/include/asm/numaq/wakecpu.h              | 12 ++++++------
 arch/x86/mach-generic/bigsmp.c                    |  4 ++--
 arch/x86/mach-generic/default.c                   |  4 ++--
 arch/x86/mach-generic/es7000.c                    |  4 ++--
 arch/x86/mach-generic/numaq.c                     |  4 ++--
 arch/x86/mach-generic/summit.c                    |  4 ++--
 10 files changed, 23 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
index 78f0daaee43..4c01be6ff80 100644
--- a/arch/x86/include/asm/es7000/wakecpu.h
+++ b/arch/x86/include/asm/es7000/wakecpu.h
@@ -1,8 +1,8 @@
 #ifndef __ASM_ES7000_WAKECPU_H
 #define __ASM_ES7000_WAKECPU_H
 
-#define TRAMPOLINE_PHYS_LOW	0x467
-#define TRAMPOLINE_PHYS_HIGH	0x469
+#define ES7000_TRAMPOLINE_PHYS_LOW	0x467
+#define ES7000_TRAMPOLINE_PHYS_HIGH	0x469
 
 static inline void wait_for_init_deassert(atomic_t *deassert)
 {
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index 89897a6a65b..0a8d7860e44 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -1,8 +1,8 @@
 #ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
 #define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
 
-#define TRAMPOLINE_PHYS_LOW (0x467)
-#define TRAMPOLINE_PHYS_HIGH (0x469)
+#define DEFAULT_TRAMPOLINE_PHYS_LOW (0x467)
+#define DEFAULT_TRAMPOLINE_PHYS_HIGH (0x469)
 
 static inline void wait_for_init_deassert(atomic_t *deassert)
 {
diff --git a/arch/x86/include/asm/mach-default/smpboot_hooks.h b/arch/x86/include/asm/mach-default/smpboot_hooks.h
index 23bf52103b8..1def6011490 100644
--- a/arch/x86/include/asm/mach-default/smpboot_hooks.h
+++ b/arch/x86/include/asm/mach-default/smpboot_hooks.h
@@ -13,10 +13,10 @@ static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 	CMOS_WRITE(0xa, 0xf);
 	local_flush_tlb();
 	pr_debug("1.\n");
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
+	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_high)) =
 								 start_eip >> 4;
 	pr_debug("2.\n");
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
+	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_low)) =
 							 start_eip & 0xf;
 	pr_debug("3.\n");
 }
@@ -34,7 +34,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	 */
 	CMOS_WRITE(0, 0xf);
 
-	*((volatile long *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
+	*((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
 }
 
 static inline void __init smpboot_setup_io_apic(void)
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
index 22006bbee61..2031377a954 100644
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 #define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 
-#define TRAMPOLINE_PHYS_LOW (apic->trampoline_phys_low)
-#define TRAMPOLINE_PHYS_HIGH (apic->trampoline_phys_high)
 #define wait_for_init_deassert (apic->wait_for_init_deassert)
 #define smp_callin_clear_local_apic (apic->smp_callin_clear_local_apic)
 #define store_NMI_vector (apic->store_NMI_vector)
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
index 6f499df8edd..8b6c16d8558 100644
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -3,8 +3,8 @@
 
 /* This file copes with machines that wakeup secondary CPUs by NMIs */
 
-#define TRAMPOLINE_PHYS_LOW (0x8)
-#define TRAMPOLINE_PHYS_HIGH (0xa)
+#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
 
 /* We don't do anything here because we use NMI's to boot instead */
 static inline void wait_for_init_deassert(atomic_t *deassert)
@@ -24,17 +24,17 @@ static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
 {
 	printk("Storing NMI vector\n");
 	*high =
-	  *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH));
+	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
 	*low =
-	  *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW));
+	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
 }
 
 static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
 {
 	printk("Restoring NMI vector\n");
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
+	*((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH)) =
 								 *high;
-	*((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
+	*((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW)) =
 								 *low;
 }
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 4782b554788..a317fbe07fd 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -104,8 +104,8 @@ struct genapic apic_bigsmp = {
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= wait_for_init_deassert,
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index bf4670db25f..17d8f9c2218 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -85,8 +85,8 @@ struct genapic apic_default = {
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= wait_for_init_deassert,
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index d36642e6d90..871e85445e2 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -140,8 +140,8 @@ struct genapic apic_es7000 = {
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= wait_for_init_deassert,
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 135b1832ad8..0b496ab5450 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -104,8 +104,8 @@ struct genapic apic_numaq = {
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= wait_for_init_deassert,
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 77196a4a9d2..c4799cd3459 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -84,8 +84,8 @@ struct genapic apic_summit = {
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= TRAMPOLINE_PHYS_HIGH,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= wait_for_init_deassert,
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
-- 
cgit v1.2.3


From abfa584c8df8b691cf18f51c7d4af27e5b32be4a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:15:16 +0100
Subject: x86: set ->trampoline_phys_low/high on 64-bit too

64-bit x86 has zero for ->trampoline_phys_low/high, but the smpboot
code can use these values - so it's better to set them up to their
correct values.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h                   | 6 ++++++
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 3 ---
 arch/x86/kernel/genapic_flat_64.c                | 8 ++++----
 arch/x86/kernel/genx2apic_cluster.c              | 4 ++--
 arch/x86/kernel/genx2apic_phys.c                 | 4 ++--
 arch/x86/kernel/genx2apic_uv_x.c                 | 4 ++--
 6 files changed, 16 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 8bb1c73c55b..90e83a769a1 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -88,6 +88,12 @@ struct genapic {
 
 extern struct genapic *apic;
 
+/*
+ * Warm reset vector default position:
+ */
+#define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
+#define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
+
 #ifdef CONFIG_X86_32
 extern void es7000_update_genapic_to_cluster(void);
 #else
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index 0a8d7860e44..a327a675e47 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -1,9 +1,6 @@
 #ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
 #define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
 
-#define DEFAULT_TRAMPOLINE_PHYS_LOW (0x467)
-#define DEFAULT_TRAMPOLINE_PHYS_HIGH (0x469)
-
 static inline void wait_for_init_deassert(atomic_t *deassert)
 {
 	while (!atomic_read(deassert))
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 7c648ccea51..3a28d6a8c49 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -224,8 +224,8 @@ struct genapic apic_flat =  {
 	.send_IPI_self			= apic_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= 0,
-	.trampoline_phys_high		= 0,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
@@ -370,8 +370,8 @@ struct genapic apic_physflat =  {
 	.send_IPI_self			= apic_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= 0,
-	.trampoline_phys_high		= 0,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 2d97726a973..abc5ee329f2 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -228,8 +228,8 @@ struct genapic apic_x2apic_cluster = {
 	.send_IPI_self			= x2apic_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= 0,
-	.trampoline_phys_high		= 0,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 74777c27669..dc815ef22d8 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -214,8 +214,8 @@ struct genapic apic_x2apic_phys = {
 	.send_IPI_self			= x2apic_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= 0,
-	.trampoline_phys_high		= 0,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 24b9f42db9b..b5908735ca5 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -287,8 +287,8 @@ struct genapic apic_x2apic_uv_x = {
 	.send_IPI_self			= uv_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= 0,
-	.trampoline_phys_high		= 0,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-- 
cgit v1.2.3


From a965936643e28af8152d9e960b966baa1a5588a2 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:21:32 +0100
Subject: x86, smp: refactor ->wait_for_init_deassert()

- spread out the namespace on a per APIC driver basis

 - handle a NULL ->wait_for_init_deassert() as a 'dont wait' default method

 - remove NUMAQ and Summit handlers

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/wakecpu.h            | 2 +-
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 2 +-
 arch/x86/include/asm/mach-generic/mach_wakecpu.h | 1 -
 arch/x86/include/asm/numaq/wakecpu.h             | 5 -----
 arch/x86/kernel/es7000_32.c                      | 6 +-----
 arch/x86/kernel/smpboot.c                        | 3 ++-
 arch/x86/mach-generic/bigsmp.c                   | 4 +++-
 arch/x86/mach-generic/default.c                  | 4 +++-
 arch/x86/mach-generic/es7000.c                   | 4 +++-
 arch/x86/mach-generic/numaq.c                    | 5 ++++-
 arch/x86/mach-generic/summit.c                   | 4 +++-
 11 files changed, 21 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
index 4c01be6ff80..5c4d05f46d2 100644
--- a/arch/x86/include/asm/es7000/wakecpu.h
+++ b/arch/x86/include/asm/es7000/wakecpu.h
@@ -4,7 +4,7 @@
 #define ES7000_TRAMPOLINE_PHYS_LOW	0x467
 #define ES7000_TRAMPOLINE_PHYS_HIGH	0x469
 
-static inline void wait_for_init_deassert(atomic_t *deassert)
+static inline void es7000_wait_for_init_deassert(atomic_t *deassert)
 {
 #ifndef CONFIG_ES7000_CLUSTERED_APIC
 	while (!atomic_read(deassert))
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index a327a675e47..1d34c69a758 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
 #define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
 
-static inline void wait_for_init_deassert(atomic_t *deassert)
+static inline void default_wait_for_init_deassert(atomic_t *deassert)
 {
 	while (!atomic_read(deassert))
 		cpu_relax();
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
index 2031377a954..58e54122f73 100644
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 #define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 
-#define wait_for_init_deassert (apic->wait_for_init_deassert)
 #define smp_callin_clear_local_apic (apic->smp_callin_clear_local_apic)
 #define store_NMI_vector (apic->store_NMI_vector)
 #define restore_NMI_vector (apic->restore_NMI_vector)
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
index 8b6c16d8558..884b95cf584 100644
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -6,11 +6,6 @@
 #define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
 #define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
 
-/* We don't do anything here because we use NMI's to boot instead */
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-}
-
 /*
  * Because we use NMIs rather than the INIT-STARTUP sequence to
  * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index e73fe18488a..d7f433ee602 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -182,10 +182,6 @@ static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 	return 0;
 }
 
-static void noop_wait_for_deassert(atomic_t *deassert_not_used)
-{
-}
-
 static int __init es7000_update_genapic(void)
 {
 	apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
@@ -194,7 +190,7 @@ static int __init es7000_update_genapic(void)
 	if (boot_cpu_data.x86 == 6 &&
 	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) {
 		es7000_update_genapic_to_cluster();
-		apic->wait_for_init_deassert = noop_wait_for_deassert;
+		apic->wait_for_init_deassert = NULL;
 		apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
 	}
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index ab83be2f8e0..558af378a61 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -196,7 +196,8 @@ static void __cpuinit smp_callin(void)
 	 * our local APIC.  We have to wait for the IPI or we'll
 	 * lock up on an APIC access.
 	 */
-	wait_for_init_deassert(&init_deasserted);
+	if (apic->wait_for_init_deassert)
+		apic->wait_for_init_deassert(&init_deasserted);
 
 	/*
 	 * (This works even if the APIC is not enabled.)
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index a317fbe07fd..40910bfd1b4 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -106,7 +106,9 @@ struct genapic apic_bigsmp = {
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= wait_for_init_deassert,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 17d8f9c2218..c2464843df9 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -87,7 +87,9 @@ struct genapic apic_default = {
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= wait_for_init_deassert,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 871e85445e2..4cb3984834e 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -142,7 +142,9 @@ struct genapic apic_es7000 = {
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= wait_for_init_deassert,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 0b496ab5450..fb03867e7c0 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -106,7 +106,10 @@ struct genapic apic_numaq = {
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= wait_for_init_deassert,
+
+	/* We don't do anything here because we use NMI's to boot instead */
+	.wait_for_init_deassert		= NULL,
+
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index c4799cd3459..fdca78b96b6 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -86,7 +86,9 @@ struct genapic apic_summit = {
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= wait_for_init_deassert,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
 	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
-- 
cgit v1.2.3


From 333344d94300500e401cffb4eea10a5ab6e5a41d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:31:52 +0100
Subject: x86, smp: refactor ->smp_callin_clear_local_apic() methods

Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
reset the APIC.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/wakecpu.h            | 5 -----
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 5 -----
 arch/x86/include/asm/mach-generic/mach_wakecpu.h | 1 -
 arch/x86/include/asm/numaq/wakecpu.h             | 4 ++--
 arch/x86/kernel/smpboot.c                        | 3 ++-
 arch/x86/mach-generic/bigsmp.c                   | 3 ++-
 arch/x86/mach-generic/default.c                  | 2 +-
 arch/x86/mach-generic/es7000.c                   | 4 +++-
 arch/x86/mach-generic/numaq.c                    | 2 +-
 arch/x86/mach-generic/summit.c                   | 3 ++-
 10 files changed, 13 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
index 5c4d05f46d2..e8e03962633 100644
--- a/arch/x86/include/asm/es7000/wakecpu.h
+++ b/arch/x86/include/asm/es7000/wakecpu.h
@@ -13,11 +13,6 @@ static inline void es7000_wait_for_init_deassert(atomic_t *deassert)
 	return;
 }
 
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
 static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
 {
 }
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index 1d34c69a758..d059807cd7e 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -8,11 +8,6 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert)
 	return;
 }
 
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
 static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
 {
 }
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
index 58e54122f73..30515a154d8 100644
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 #define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 
-#define smp_callin_clear_local_apic (apic->smp_callin_clear_local_apic)
 #define store_NMI_vector (apic->store_NMI_vector)
 #define restore_NMI_vector (apic->restore_NMI_vector)
 #define inquire_remote_apic (apic->inquire_remote_apic)
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
index 884b95cf584..61d0a7d9613 100644
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -8,9 +8,9 @@
 
 /*
  * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
  */
-static inline void smp_callin_clear_local_apic(void)
+static inline void numaq_smp_callin_clear_local_apic(void)
 {
 	clear_local_APIC();
 }
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 558af378a61..10873a46b29 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -244,7 +244,8 @@ static void __cpuinit smp_callin(void)
 	 */
 
 	pr_debug("CALLIN, before setup_local_APIC().\n");
-	smp_callin_clear_local_apic();
+	if (apic->smp_callin_clear_local_apic)
+		apic->smp_callin_clear_local_apic();
 	setup_local_APIC();
 	end_local_APIC_setup();
 	map_cpu_to_logical_apicid();
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 40910bfd1b4..bd069e7b521 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -109,7 +109,8 @@ struct genapic apic_bigsmp = {
 
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
-	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.smp_callin_clear_local_apic	= NULL,
+
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index c2464843df9..a25e6eff048 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -90,7 +90,7 @@ struct genapic apic_default = {
 
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
-	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 4cb3984834e..ab41b543914 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -145,7 +145,9 @@ struct genapic apic_es7000 = {
 
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
-	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
+	.smp_callin_clear_local_apic	= NULL,
+
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index fb03867e7c0..4d3924f8cd0 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -110,7 +110,7 @@ struct genapic apic_numaq = {
 	/* We don't do anything here because we use NMI's to boot instead */
 	.wait_for_init_deassert		= NULL,
 
-	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index fdca78b96b6..2595baa7997 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -89,7 +89,8 @@ struct genapic apic_summit = {
 
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
-	.smp_callin_clear_local_apic	= smp_callin_clear_local_apic,
+	.smp_callin_clear_local_apic	= NULL,
+
 	.store_NMI_vector		= store_NMI_vector,
 	.restore_NMI_vector		= restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
-- 
cgit v1.2.3


From 7bd06ec63a1204ca44b9f1dc487b8632016162d1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:31:52 +0100
Subject: x86, smp: refactor ->store/restore_NMI_vector() methods

Only NUMAQ does something substantial here, because it initializes
via NMIs (not via INIT as standard SMP startup) - so it needs to
store and restore the NMI vector.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/wakecpu.h            | 8 --------
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 8 --------
 arch/x86/include/asm/mach-generic/mach_wakecpu.h | 2 --
 arch/x86/include/asm/numaq/wakecpu.h             | 6 ++++--
 arch/x86/kernel/smpboot.c                        | 3 ++-
 arch/x86/mach-generic/bigsmp.c                   | 5 ++---
 arch/x86/mach-generic/default.c                  | 4 ++--
 arch/x86/mach-generic/es7000.c                   | 5 ++---
 arch/x86/mach-generic/numaq.c                    | 4 ++--
 arch/x86/mach-generic/summit.c                   | 5 ++---
 10 files changed, 16 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
index e8e03962633..71a3a412d0e 100644
--- a/arch/x86/include/asm/es7000/wakecpu.h
+++ b/arch/x86/include/asm/es7000/wakecpu.h
@@ -13,14 +13,6 @@ static inline void es7000_wait_for_init_deassert(atomic_t *deassert)
 	return;
 }
 
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
 extern void __inquire_remote_apic(int apicid);
 
 static inline void inquire_remote_apic(int apicid)
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index d059807cd7e..656bb5e52bc 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -8,14 +8,6 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert)
 	return;
 }
 
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
 #ifdef CONFIG_SMP
 extern void __inquire_remote_apic(int apicid);
 #else /* CONFIG_SMP */
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
index 30515a154d8..93207dfe8f5 100644
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 #define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 
-#define store_NMI_vector (apic->store_NMI_vector)
-#define restore_NMI_vector (apic->restore_NMI_vector)
 #define inquire_remote_apic (apic->inquire_remote_apic)
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
index 61d0a7d9613..123201712a9 100644
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -15,7 +15,8 @@ static inline void numaq_smp_callin_clear_local_apic(void)
 	clear_local_APIC();
 }
 
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+static inline void
+numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
 {
 	printk("Storing NMI vector\n");
 	*high =
@@ -24,7 +25,8 @@ static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
 	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
 }
 
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+static inline void
+numaq_restore_NMI_vector(unsigned short *high, unsigned short *low)
 {
 	printk("Restoring NMI vector\n");
 	*((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH)) =
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 10873a46b29..1492024592f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -826,7 +826,8 @@ do_rest:
 
 		pr_debug("Setting warm reset code and vector.\n");
 
-		store_NMI_vector(&nmi_high, &nmi_low);
+		if (apic->store_NMI_vector)
+			apic->store_NMI_vector(&nmi_high, &nmi_low);
 
 		smpboot_setup_warm_reset_vector(start_ip);
 		/*
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index bd069e7b521..ecdb230d0f2 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -110,8 +110,7 @@ struct genapic apic_bigsmp = {
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
 	.smp_callin_clear_local_apic	= NULL,
-
-	.store_NMI_vector		= store_NMI_vector,
-	.restore_NMI_vector		= restore_NMI_vector,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index a25e6eff048..950925615a9 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -91,7 +91,7 @@ struct genapic apic_default = {
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= store_NMI_vector,
-	.restore_NMI_vector		= restore_NMI_vector,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index ab41b543914..13190709138 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -147,8 +147,7 @@ struct genapic apic_es7000 = {
 
 	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
 	.smp_callin_clear_local_apic	= NULL,
-
-	.store_NMI_vector		= store_NMI_vector,
-	.restore_NMI_vector		= restore_NMI_vector,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 4d3924f8cd0..d7f7fcf21c3 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -111,7 +111,7 @@ struct genapic apic_numaq = {
 	.wait_for_init_deassert		= NULL,
 
 	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
-	.store_NMI_vector		= store_NMI_vector,
-	.restore_NMI_vector		= restore_NMI_vector,
+	.store_NMI_vector		= numaq_store_NMI_vector,
+	.restore_NMI_vector		= numaq_restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 2595baa7997..46fca79f831 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -90,8 +90,7 @@ struct genapic apic_summit = {
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
 	.smp_callin_clear_local_apic	= NULL,
-
-	.store_NMI_vector		= store_NMI_vector,
-	.restore_NMI_vector		= restore_NMI_vector,
+	.store_NMI_vector		= NULL,
+	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
-- 
cgit v1.2.3


From 3d5f597e938c425554cb7668fd3c9d6a536a984a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:43:47 +0100
Subject: x86, smp: remove ->restore_NMI_vector()

Nothing actually restores the NMI vector - so remove this
logic altogether.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h       |  1 -
 arch/x86/include/asm/numaq/wakecpu.h | 10 ----------
 arch/x86/kernel/genapic_flat_64.c    |  2 --
 arch/x86/kernel/genx2apic_cluster.c  |  1 -
 arch/x86/kernel/genx2apic_phys.c     |  1 -
 arch/x86/kernel/genx2apic_uv_x.c     |  1 -
 arch/x86/mach-generic/bigsmp.c       |  1 -
 arch/x86/mach-generic/default.c      |  1 -
 arch/x86/mach-generic/es7000.c       |  1 -
 arch/x86/mach-generic/numaq.c        |  1 -
 arch/x86/mach-generic/summit.c       |  1 -
 11 files changed, 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 90e83a769a1..e5f9c5696fb 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -82,7 +82,6 @@ struct genapic {
 	void (*wait_for_init_deassert)(atomic_t *deassert);
 	void (*smp_callin_clear_local_apic)(void);
 	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
 	void (*inquire_remote_apic)(int apicid);
 };
 
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
index 123201712a9..920dcfefa83 100644
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -25,16 +25,6 @@ numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
 	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
 }
 
-static inline void
-numaq_restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Restoring NMI vector\n");
-	*((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH)) =
-								 *high;
-	*((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW)) =
-								 *low;
-}
-
 static inline void inquire_remote_apic(int apicid)
 {
 }
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 3a28d6a8c49..e9237f59928 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -229,7 +229,6 @@ struct genapic apic_flat =  {
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 };
 
@@ -375,6 +374,5 @@ struct genapic apic_physflat =  {
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 };
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index abc5ee329f2..7c87156b641 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -233,6 +233,5 @@ struct genapic apic_x2apic_cluster = {
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 };
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index dc815ef22d8..5cbae8aa040 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -219,6 +219,5 @@ struct genapic apic_x2apic_phys = {
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 };
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index b5908735ca5..6adb5e6f4d9 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -292,7 +292,6 @@ struct genapic apic_x2apic_uv_x = {
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 };
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index ecdb230d0f2..d9377af88cb 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -111,6 +111,5 @@ struct genapic apic_bigsmp = {
 
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 950925615a9..b004257035c 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -92,6 +92,5 @@ struct genapic apic_default = {
 
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 13190709138..62673a8002f 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -148,6 +148,5 @@ struct genapic apic_es7000 = {
 	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index d7f7fcf21c3..2c3341564d1 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -112,6 +112,5 @@ struct genapic apic_numaq = {
 
 	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
 	.store_NMI_vector		= numaq_store_NMI_vector,
-	.restore_NMI_vector		= numaq_restore_NMI_vector,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 46fca79f831..c2471a9fa8f 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -91,6 +91,5 @@ struct genapic apic_summit = {
 
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.restore_NMI_vector		= NULL,
 	.inquire_remote_apic		= inquire_remote_apic,
 };
-- 
cgit v1.2.3


From 25dc004903a38f0b6f6626dbbab058c8709c5398 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 16:31:52 +0100
Subject: x86, smp: refactor ->inquire_remote_apic() methods

Nothing exciting - a few subarches dont want APIC remote reads to
be performed - the others are content with the default method.

 - extend the generic code to handle NULL methods

 - clear out dummy methods and replace them with NULL

 - clean up: remove wrapper macros, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/wakecpu.h            | 8 --------
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 2 +-
 arch/x86/include/asm/mach-generic/mach_wakecpu.h | 2 --
 arch/x86/include/asm/numaq/wakecpu.h             | 4 ----
 arch/x86/kernel/smpboot.c                        | 4 ++--
 arch/x86/mach-generic/bigsmp.c                   | 2 +-
 arch/x86/mach-generic/default.c                  | 2 +-
 arch/x86/mach-generic/es7000.c                   | 2 +-
 arch/x86/mach-generic/numaq.c                    | 2 +-
 arch/x86/mach-generic/summit.c                   | 2 +-
 10 files changed, 8 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
index 71a3a412d0e..99c72be1840 100644
--- a/arch/x86/include/asm/es7000/wakecpu.h
+++ b/arch/x86/include/asm/es7000/wakecpu.h
@@ -13,12 +13,4 @@ static inline void es7000_wait_for_init_deassert(atomic_t *deassert)
 	return;
 }
 
-extern void __inquire_remote_apic(int apicid);
-
-static inline void inquire_remote_apic(int apicid)
-{
-	if (apic_verbosity >= APIC_DEBUG)
-		__inquire_remote_apic(apicid);
-}
-
 #endif /* __ASM_MACH_WAKECPU_H */
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index 656bb5e52bc..b1cde560e4c 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -16,7 +16,7 @@ static inline void __inquire_remote_apic(int apicid)
 }
 #endif /* CONFIG_SMP */
 
-static inline void inquire_remote_apic(int apicid)
+static inline void default_inquire_remote_apic(int apicid)
 {
 	if (apic_verbosity >= APIC_DEBUG)
 		__inquire_remote_apic(apicid);
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
index 93207dfe8f5..0b884c03a3f 100644
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -1,6 +1,4 @@
 #ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 #define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
 
-#define inquire_remote_apic (apic->inquire_remote_apic)
-
 #endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
index 920dcfefa83..afe81439c7d 100644
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ b/arch/x86/include/asm/numaq/wakecpu.h
@@ -25,8 +25,4 @@ numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
 	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
 }
 
-static inline void inquire_remote_apic(int apicid)
-{
-}
-
 #endif /* __ASM_NUMAQ_WAKECPU_H */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 1492024592f..170adc5b6cb 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -876,8 +876,8 @@ do_rest:
 			else
 				/* trampoline code not run */
 				printk(KERN_ERR "Not responding.\n");
-			if (get_uv_system_type() != UV_NON_UNIQUE_APIC)
-				inquire_remote_apic(apicid);
+			if (apic->inquire_remote_apic)
+				apic->inquire_remote_apic(apicid);
 		}
 	}
 
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index d9377af88cb..4d8b2d442ba 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -111,5 +111,5 @@ struct genapic apic_bigsmp = {
 
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= inquire_remote_apic,
+	.inquire_remote_apic		= default_inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index b004257035c..c12dd2300a5 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -92,5 +92,5 @@ struct genapic apic_default = {
 
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= inquire_remote_apic,
+	.inquire_remote_apic		= default_inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 62673a8002f..be090b2037c 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -148,5 +148,5 @@ struct genapic apic_es7000 = {
 	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= inquire_remote_apic,
+	.inquire_remote_apic		= default_inquire_remote_apic,
 };
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index 2c3341564d1..ddb50fba286 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -112,5 +112,5 @@ struct genapic apic_numaq = {
 
 	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
 	.store_NMI_vector		= numaq_store_NMI_vector,
-	.inquire_remote_apic		= inquire_remote_apic,
+	.inquire_remote_apic		= NULL,
 };
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index c2471a9fa8f..d5db3045437 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -91,5 +91,5 @@ struct genapic apic_summit = {
 
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= inquire_remote_apic,
+	.inquire_remote_apic		= default_inquire_remote_apic,
 };
-- 
cgit v1.2.3


From 018e047f3a98bd8d9e9d78b19bc38415f0c34dd7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:09:58 +0100
Subject: x86, ES7000: consolidate the APIC code

Consolidate all the ES7000 APIC code into arch/x86/mach-generic/es7000.c.

With this ES7000 ceases to rely on any subarchitecture include files.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/es7000/apic.h    | 236 -------------------------
 arch/x86/include/asm/es7000/apicdef.h |   9 -
 arch/x86/include/asm/es7000/ipi.h     |  22 ---
 arch/x86/include/asm/es7000/mpparse.h |  23 ---
 arch/x86/include/asm/es7000/wakecpu.h |  16 --
 arch/x86/mach-generic/es7000.c        | 314 ++++++++++++++++++++++++++++++++--
 6 files changed, 295 insertions(+), 325 deletions(-)
 delete mode 100644 arch/x86/include/asm/es7000/apic.h
 delete mode 100644 arch/x86/include/asm/es7000/apicdef.h
 delete mode 100644 arch/x86/include/asm/es7000/ipi.h
 delete mode 100644 arch/x86/include/asm/es7000/mpparse.h
 delete mode 100644 arch/x86/include/asm/es7000/wakecpu.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/es7000/apic.h b/arch/x86/include/asm/es7000/apic.h
deleted file mode 100644
index b89b45db735..00000000000
--- a/arch/x86/include/asm/es7000/apic.h
+++ /dev/null
@@ -1,236 +0,0 @@
-#ifndef __ASM_ES7000_APIC_H
-#define __ASM_ES7000_APIC_H
-
-#include <linux/gfp.h>
-
-#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
-
-static inline int es7000_apic_id_registered(void)
-{
-	        return 1;
-}
-
-static inline const cpumask_t *target_cpus_cluster(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static inline const cpumask_t *es7000_target_cpus(void)
-{
-	return &cpumask_of_cpu(smp_processor_id());
-}
-
-#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
-#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
-
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-
-static inline unsigned long
-es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-static inline unsigned long es7000_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-extern void es7000_enable_apic_mode(void);
-
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long id;
-	id = xapic_phys_to_log_apicid(cpu);
-	return (SET_APIC_LOGICAL_ID(id));
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void es7000_init_apic_ldr_cluster(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void es7000_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-extern int apic_version [MAX_APICS];
-static inline void es7000_setup_apic_routing(void)
-{
-	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
-		(apic_version[apic] == 0x14) ?
-			"Physical Cluster" : "Logical Cluster",
-			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
-}
-
-static inline int es7000_apicid_to_node(int logical_apicid)
-{
-	return 0;
-}
-
-
-static inline int es7000_cpu_present_to_apicid(int mps_cpu)
-{
-	if (!mps_cpu)
-		return boot_cpu_physical_apicid;
-	else if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
-{
-	static int id = 0;
-	physid_mask_t mask;
-	mask = physid_mask_of_physid(id);
-	++id;
-	return mask;
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int es7000_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
-}
-
-extern unsigned int boot_cpu_physical_apicid;
-
-static inline int es7000_check_phys_apicid_present(int cpu_physical_apicid)
-{
-	boot_cpu_physical_apicid = read_apic_id();
-	return (1);
-}
-
-static inline unsigned int
-es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpumask_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = cpumask_first(cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-
-	while (cpus_found < num_bits_set) {
-		if (cpumask_test_cpu(cpu, cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
-
-				return 0xFF;
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return es7000_cpu_to_logical_apicid(0);
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
-
-				return es7000_cpu_to_logical_apicid(0);
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-
-static inline unsigned int
-es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
-			      const struct cpumask *andmask)
-{
-	int apicid = es7000_cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = es7000_cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-
-	return apicid;
-}
-
-static inline int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_ES7000_APIC_H */
diff --git a/arch/x86/include/asm/es7000/apicdef.h b/arch/x86/include/asm/es7000/apicdef.h
deleted file mode 100644
index c74881a7b3d..00000000000
--- a/arch/x86/include/asm/es7000/apicdef.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_ES7000_APICDEF_H
-#define __ASM_ES7000_APICDEF_H
-
-static inline unsigned int es7000_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-#endif
diff --git a/arch/x86/include/asm/es7000/ipi.h b/arch/x86/include/asm/es7000/ipi.h
deleted file mode 100644
index 81e77c812ba..00000000000
--- a/arch/x86/include/asm/es7000/ipi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_ES7000_IPI_H
-#define __ASM_ES7000_IPI_H
-
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void es7000_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void es7000_send_IPI_all(int vector)
-{
-	es7000_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_ES7000_IPI_H */
diff --git a/arch/x86/include/asm/es7000/mpparse.h b/arch/x86/include/asm/es7000/mpparse.h
deleted file mode 100644
index 662eb1e574d..00000000000
--- a/arch/x86/include/asm/es7000/mpparse.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_ES7000_MPPARSE_H
-#define __ASM_ES7000_MPPARSE_H
-
-#include <linux/acpi.h>
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
-extern void setup_unisys(void);
-
-#ifdef CONFIG_ACPI
-static inline int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-#endif
-
-#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/es7000/wakecpu.h b/arch/x86/include/asm/es7000/wakecpu.h
deleted file mode 100644
index 99c72be1840..00000000000
--- a/arch/x86/include/asm/es7000/wakecpu.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ES7000_WAKECPU_H
-#define __ASM_ES7000_WAKECPU_H
-
-#define ES7000_TRAMPOLINE_PHYS_LOW	0x467
-#define ES7000_TRAMPOLINE_PHYS_HIGH	0x469
-
-static inline void es7000_wait_for_init_deassert(atomic_t *deassert)
-{
-#ifndef CONFIG_ES7000_CLUSTERED_APIC
-	while (!atomic_read(deassert))
-		cpu_relax();
-#endif
-	return;
-}
-
-#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index be090b2037c..8b6113ec380 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -11,13 +11,300 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <asm/es7000/apicdef.h>
+#include <linux/acpi.h>
 #include <linux/smp.h>
-#include <asm/es7000/apic.h>
-#include <asm/es7000/ipi.h>
-#include <asm/es7000/mpparse.h>
+#include <asm/ipi.h>
 #include <asm/mach-default/mach_wakecpu.h>
 
+#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
+#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
+
+#define APIC_DFR_VALUE			(APIC_DFR_FLAT)
+
+extern void es7000_enable_apic_mode(void);
+extern int apic_version [MAX_APICS];
+extern u8 cpu_2_logical_apicid[];
+extern unsigned int boot_cpu_physical_apicid;
+
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
+extern void setup_unisys(void);
+
+#define apicid_cluster(apicid)		(apicid & 0xF0)
+#define xapic_phys_to_log_apicid(cpu)	per_cpu(x86_bios_cpu_apicid, cpu)
+
+static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+
+static void es7000_wait_for_init_deassert(atomic_t *deassert)
+{
+#ifndef CONFIG_ES7000_CLUSTERED_APIC
+	while (!atomic_read(deassert))
+		cpu_relax();
+#endif
+	return;
+}
+
+static unsigned int es7000_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+#ifdef CONFIG_ACPI
+static int es7000_check_dsdt(void)
+{
+	struct acpi_table_header header;
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
+		return 1;
+	return 0;
+}
+#endif
+
+static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence(mask, vector);
+}
+
+static void es7000_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+}
+
+static void es7000_send_IPI_all(int vector)
+{
+	es7000_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int es7000_apic_id_registered(void)
+{
+	        return 1;
+}
+
+static const cpumask_t *target_cpus_cluster(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static const cpumask_t *es7000_target_cpus(void)
+{
+	return &cpumask_of_cpu(smp_processor_id());
+}
+
+static unsigned long
+es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+static unsigned long es7000_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static unsigned long calculate_ldr(int cpu)
+{
+	unsigned long id = xapic_phys_to_log_apicid(cpu);
+
+	return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static void es7000_init_apic_ldr_cluster(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static void es7000_init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static void es7000_setup_apic_routing(void)
+{
+	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+		(apic_version[apic] == 0x14) ?
+			"Physical Cluster" : "Logical Cluster",
+			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
+}
+
+static int es7000_apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+
+static int es7000_cpu_present_to_apicid(int mps_cpu)
+{
+	if (!mps_cpu)
+		return boot_cpu_physical_apicid;
+	else if (mps_cpu < nr_cpu_ids)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
+{
+	static int id = 0;
+	physid_mask_t mask;
+
+	mask = physid_mask_of_physid(id);
+	++id;
+
+	return mask;
+}
+
+/* Mapping from cpu number to logical apicid */
+static int es7000_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xff);
+}
+
+static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
+{
+	boot_cpu_physical_apicid = read_apic_id();
+	return (1);
+}
+
+static unsigned int
+es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpumask_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == nr_cpu_ids)
+		return 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = cpumask_first(cpumask);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
+
+	while (cpus_found < num_bits_set) {
+		if (cpumask_test_cpu(cpu, cpumask)) {
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return 0xFF;
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpus_weight(*cpumask);
+	/* Return id to all */
+	if (num_bits_set == nr_cpu_ids)
+		return es7000_cpu_to_logical_apicid(0);
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = first_cpu(*cpumask);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, *cpumask)) {
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return es7000_cpu_to_logical_apicid(0);
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static unsigned int
+es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
+{
+	int apicid = es7000_cpu_to_logical_apicid(0);
+	cpumask_var_t cpumask;
+
+	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+		return apicid;
+
+	cpumask_and(cpumask, inmask, andmask);
+	cpumask_and(cpumask, cpumask, cpu_online_mask);
+	apicid = es7000_cpu_mask_to_apicid(cpumask);
+
+	free_cpumask_var(cpumask);
+
+	return apicid;
+}
+
+static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
 void __init es7000_update_genapic_to_cluster(void)
 {
 	apic->target_cpus = target_cpus_cluster;
@@ -80,18 +367,6 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 }
 #endif
 
-static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
 
 struct genapic apic_es7000 = {
 
@@ -140,10 +415,11 @@ struct genapic apic_es7000 = {
 	.send_IPI_self			= NULL,
 
 	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
+	.trampoline_phys_low		= 0x467,
+	.trampoline_phys_high		= 0x469,
+
+	.wait_for_init_deassert		= es7000_wait_for_init_deassert,
 
 	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
 	.smp_callin_clear_local_apic	= NULL,
-- 
cgit v1.2.3


From 0939e4fd351c58d08d25650797749f18904461af Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:16:25 +0100
Subject: x86, smp: eliminate asm/mach-default/mach_wakecpu.h

Spread mach_wakecpu.h's definitions into apic.h and genapic.h
and remove mach_wakecpu.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h                      | 15 ++++++++++++++
 arch/x86/include/asm/genapic.h                   |  7 +++++++
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 25 ------------------------
 arch/x86/kernel/smpboot.c                        |  1 -
 arch/x86/mach-generic/bigsmp.c                   |  1 -
 arch/x86/mach-generic/default.c                  |  1 -
 arch/x86/mach-generic/es7000.c                   |  1 -
 arch/x86/mach-generic/summit.c                   |  1 -
 8 files changed, 22 insertions(+), 30 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-default/mach_wakecpu.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index ab1d51a8855..e8f030440bc 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -41,6 +41,21 @@ extern unsigned int apic_verbosity;
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+
+#ifdef CONFIG_SMP
+extern void __inquire_remote_apic(int apicid);
+#else /* CONFIG_SMP */
+static inline void __inquire_remote_apic(int apicid)
+{
+}
+#endif /* CONFIG_SMP */
+
+static inline void default_inquire_remote_apic(int apicid)
+{
+	if (apic_verbosity >= APIC_DEBUG)
+		__inquire_remote_apic(apicid);
+}
+
 /*
  * Basic functions accessing APICs.
  */
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index e5f9c5696fb..1772dad01b1 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -113,4 +113,11 @@ extern int default_cpu_present_to_apicid(int mps_cpu);
 extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
 #endif
 
+static inline void default_wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert))
+		cpu_relax();
+	return;
+}
+
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
deleted file mode 100644
index b1cde560e4c..00000000000
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
-#define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
-
-static inline void default_wait_for_init_deassert(atomic_t *deassert)
-{
-	while (!atomic_read(deassert))
-		cpu_relax();
-	return;
-}
-
-#ifdef CONFIG_SMP
-extern void __inquire_remote_apic(int apicid);
-#else /* CONFIG_SMP */
-static inline void __inquire_remote_apic(int apicid)
-{
-}
-#endif /* CONFIG_SMP */
-
-static inline void default_inquire_remote_apic(int apicid)
-{
-	if (apic_verbosity >= APIC_DEBUG)
-		__inquire_remote_apic(apicid);
-}
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 170adc5b6cb..1fdc1a7e7b5 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -66,7 +66,6 @@
 #include <linux/mc146818rtc.h>
 
 #include <mach_apic.h>
-#include <mach_wakecpu.h>
 #include <smpboot_hooks.h>
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 4d8b2d442ba..6fcccfb5918 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -17,7 +17,6 @@
 #include <asm/bigsmp/apic.h>
 #include <asm/bigsmp/ipi.h>
 #include <asm/mach-default/mach_mpparse.h>
-#include <asm/mach-default/mach_wakecpu.h>
 
 static int dmi_bigsmp; /* can be set by dmi scanners */
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index c12dd2300a5..e3c5114fd91 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -16,7 +16,6 @@
 #include <asm/mach-default/mach_apic.h>
 #include <asm/mach-default/mach_ipi.h>
 #include <asm/mach-default/mach_mpparse.h>
-#include <asm/mach-default/mach_wakecpu.h>
 
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
index 8b6113ec380..bb11166b7c3 100644
--- a/arch/x86/mach-generic/es7000.c
+++ b/arch/x86/mach-generic/es7000.c
@@ -14,7 +14,6 @@
 #include <linux/acpi.h>
 #include <linux/smp.h>
 #include <asm/ipi.h>
-#include <asm/mach-default/mach_wakecpu.h>
 
 #define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
 #define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index d5db3045437..673a64f8b46 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -16,7 +16,6 @@
 #include <asm/summit/apic.h>
 #include <asm/summit/ipi.h>
 #include <asm/summit/mpparse.h>
-#include <asm/mach-default/mach_wakecpu.h>
 
 static int probe_summit(void)
 {
-- 
cgit v1.2.3


From fb5b33c9f62ca9222c11841d61ddb7dc1a6552e9 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:29:27 +0100
Subject: x86: eliminate asm/mach-*/mach_mpparse.h

Move the definition to mpparse.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_mpparse.h | 17 -----------------
 arch/x86/include/asm/mach-generic/mach_mpparse.h |  8 --------
 arch/x86/include/asm/mpspec.h                    |  4 ++++
 arch/x86/kernel/acpi/boot.c                      |  1 -
 arch/x86/kernel/es7000_32.c                      |  1 -
 arch/x86/kernel/mpparse.c                        |  1 -
 arch/x86/mach-generic/bigsmp.c                   |  1 -
 arch/x86/mach-generic/default.c                  |  1 -
 8 files changed, 4 insertions(+), 30 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-default/mach_mpparse.h
 delete mode 100644 arch/x86/include/asm/mach-generic/mach_mpparse.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-default/mach_mpparse.h b/arch/x86/include/asm/mach-default/mach_mpparse.h
deleted file mode 100644
index af0da140df9..00000000000
--- a/arch/x86/include/asm/mach-default/mach_mpparse.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
-#define _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H
-
-static inline int
-generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_mpparse.h b/arch/x86/include/asm/mach-generic/mach_mpparse.h
deleted file mode 100644
index 22bfb56f8fb..00000000000
--- a/arch/x86/include/asm/mach-generic/mach_mpparse.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
-#define _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H
-
-extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
-
-extern int default_acpi_madt_oem_check(char *, char *);
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_MPPARSE_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 62d14ce3cd0..432e9cbc607 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -142,4 +142,8 @@ static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
 
 extern physid_mask_t phys_cpu_present_map;
 
+extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
+
+extern int default_acpi_madt_oem_check(char *, char *);
+
 #endif /* _ASM_X86_MPSPEC_H */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 539163161a4..7b02a1cedca 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -63,7 +63,6 @@ EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_LOCAL_APIC
 #include <mach_apic.h>
-#include <mach_mpparse.h>
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
 #endif				/* X86 */
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index d7f433ee602..8faea13c8fa 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -40,7 +40,6 @@
 #include <asm/smp.h>
 #include <asm/atomic.h>
 #include <asm/apicdef.h>
-#include <mach_mpparse.h>
 #include <asm/genapic.h>
 #include <asm/setup.h>
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index b12fa5ce6f5..c6930162b3b 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -32,7 +32,6 @@
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
 #include <mach_apicdef.h>
-#include <mach_mpparse.h>
 #endif
 
 /*
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 6fcccfb5918..626f45ca4e7 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -16,7 +16,6 @@
 #include <linux/smp.h>
 #include <asm/bigsmp/apic.h>
 #include <asm/bigsmp/ipi.h>
-#include <asm/mach-default/mach_mpparse.h>
 
 static int dmi_bigsmp; /* can be set by dmi scanners */
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index e3c5114fd91..6485e57e29b 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <asm/mach-default/mach_apic.h>
 #include <asm/mach-default/mach_ipi.h>
-#include <asm/mach-default/mach_mpparse.h>
 
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
-- 
cgit v1.2.3


From b2af018ff26f1a2a026f548f7f0e552589905689 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:36:56 +0100
Subject: x86: remove mach_mpspec.h

Move its definitions into mpspec.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_mpspec.h | 12 ------------
 arch/x86/include/asm/mach-generic/mach_mpspec.h | 12 ------------
 arch/x86/include/asm/mpspec.h                   | 25 +++++++++++++++++++------
 3 files changed, 19 insertions(+), 30 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-default/mach_mpspec.h
 delete mode 100644 arch/x86/include/asm/mach-generic/mach_mpspec.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-default/mach_mpspec.h b/arch/x86/include/asm/mach-default/mach_mpspec.h
deleted file mode 100644
index e85ede686be..00000000000
--- a/arch/x86/include/asm/mach-default/mach_mpspec.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
-#define _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#if CONFIG_BASE_SMALL == 0
-#define MAX_MP_BUSSES 256
-#else
-#define MAX_MP_BUSSES 32
-#endif
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_MPSPEC_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_mpspec.h b/arch/x86/include/asm/mach-generic/mach_mpspec.h
deleted file mode 100644
index 3bc40722657..00000000000
--- a/arch/x86/include/asm/mach-generic/mach_mpspec.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
-#define _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
-/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
-#define MAX_MP_BUSSES 260
-
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_MPSPEC_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 432e9cbc607..03fb0d39654 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -9,7 +9,18 @@ extern int apic_version[MAX_APICS];
 extern int pic_mode;
 
 #ifdef CONFIG_X86_32
-#include <mach_mpspec.h>
+
+/*
+ * Summit or generic (i.e. installer) kernels need lots of bus entries.
+ * Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets.
+ */
+#if CONFIG_BASE_SMALL == 0
+# define MAX_MP_BUSSES		260
+#else
+# define MAX_MP_BUSSES		32
+#endif
+
+#define MAX_IRQ_SOURCES		256
 
 extern unsigned int def_to_bigsmp;
 extern u8 apicid_2_node[];
@@ -20,15 +31,15 @@ extern int mp_bus_id_to_local[MAX_MP_BUSSES];
 extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #endif
 
-#define MAX_APICID 256
+#define MAX_APICID		256
 
-#else
+#else /* CONFIG_X86_64: */
 
-#define MAX_MP_BUSSES 256
+#define MAX_MP_BUSSES		256
 /* Each PCI slot may be a combo card with its own bus.  4 IRQ pins per slot. */
-#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
+#define MAX_IRQ_SOURCES		(MAX_MP_BUSSES * 4)
 
-#endif
+#endif /* CONFIG_X86_64 */
 
 extern void early_find_smp_config(void);
 extern void early_get_smp_config(void);
@@ -146,4 +157,6 @@ extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
 
 extern int default_acpi_madt_oem_check(char *, char *);
 
+extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
+
 #endif /* _ASM_X86_MPSPEC_H */
-- 
cgit v1.2.3


From 1f75ed0c1311a50ed393bcac258de65680d360e5 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:36:56 +0100
Subject: x86: remove mach_apicdef.h

Move its definitions into apic.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h                      | 16 ++++++++++++++++
 arch/x86/include/asm/mach-default/mach_apic.h    |  1 -
 arch/x86/include/asm/mach-default/mach_apicdef.h | 22 ----------------------
 arch/x86/include/asm/mach-generic/mach_apicdef.h |  8 --------
 arch/x86/include/asm/smp.h                       |  4 ++--
 arch/x86/kernel/apic.c                           |  1 -
 arch/x86/kernel/genapic_flat_64.c                |  1 -
 arch/x86/kernel/io_apic.c                        |  1 -
 arch/x86/kernel/mpparse.c                        |  3 ---
 arch/x86/mach-generic/default.c                  |  1 -
 10 files changed, 18 insertions(+), 40 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-default/mach_apicdef.h
 delete mode 100644 arch/x86/include/asm/mach-generic/mach_apicdef.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index e8f030440bc..3a3202074c6 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -211,4 +211,20 @@ static inline void disable_local_APIC(void) { }
 
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
+#ifdef CONFIG_X86_64
+#define	SET_APIC_ID(x)		(apic->set_apic_id(x))
+#else
+
+static inline unsigned default_get_apic_id(unsigned long x) 
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+
+	if (APIC_XAPIC(ver))
+		return (x >> 24) & 0xFF;
+	else
+		return (x >> 24) & 0x0F;
+}
+
+#endif
+
 #endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index 2e4104cf348..b60b767d5be 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -3,7 +3,6 @@
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
-#include <mach_apicdef.h>
 #include <asm/smp.h>
 
 #define APIC_DFR_VALUE	(APIC_DFR_FLAT)
diff --git a/arch/x86/include/asm/mach-default/mach_apicdef.h b/arch/x86/include/asm/mach-default/mach_apicdef.h
deleted file mode 100644
index 5141085962d..00000000000
--- a/arch/x86/include/asm/mach-default/mach_apicdef.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
-#define _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H
-
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_64
-#define	SET_APIC_ID(x)		(apic->set_apic_id(x))
-#else
-
-static inline unsigned default_get_apic_id(unsigned long x) 
-{
-	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
-
-	if (APIC_XAPIC(ver))
-		return (x >> 24) & 0xFF;
-	else
-		return (x >> 24) & 0x0F;
-} 
-
-#endif
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apicdef.h b/arch/x86/include/asm/mach-generic/mach_apicdef.h
deleted file mode 100644
index 61caa65b13f..00000000000
--- a/arch/x86/include/asm/mach-generic/mach_apicdef.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
-#define _ASM_X86_MACH_GENERIC_MACH_APICDEF_H
-
-#ifndef APIC_DEFINITION
-#include <asm/genapic.h>
-#endif
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_APICDEF_H */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index c63d480802a..d4ac4de4bce 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -173,6 +173,8 @@ extern int safe_smp_processor_id(void);
 
 #endif
 
+#include <asm/genapic.h>
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 #ifndef CONFIG_X86_64
@@ -182,7 +184,6 @@ static inline int logical_smp_processor_id(void)
 	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
 }
 
-#include <mach_apicdef.h>
 static inline unsigned int read_apic_id(void)
 {
 	unsigned int reg;
@@ -197,7 +198,6 @@ static inline unsigned int read_apic_id(void)
 # if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
 extern int hard_smp_processor_id(void);
 # else
-#include <mach_apicdef.h>
 static inline int hard_smp_processor_id(void)
 {
 	/* we don't want to mark this access volatile - bad code generation */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 84b8e7c57ab..e6220809ca1 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -50,7 +50,6 @@
 #include <asm/smp.h>
 
 #include <mach_apic.h>
-#include <mach_apicdef.h>
 #include <mach_ipi.h>
 
 /*
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index e9237f59928..19bffb3f732 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -19,7 +19,6 @@
 #include <asm/smp.h>
 #include <asm/ipi.h>
 #include <asm/genapic.h>
-#include <mach_apicdef.h>
 
 #ifdef CONFIG_ACPI
 #include <acpi/acpi_bus.h>
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index e90970ce21a..abae81989c2 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -64,7 +64,6 @@
 
 #include <mach_ipi.h>
 #include <mach_apic.h>
-#include <mach_apicdef.h>
 
 #define __apicdebuginit(type) static type __init
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index c6930162b3b..a1452a53d14 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -30,9 +30,6 @@
 #include <asm/smp.h>
 
 #include <mach_apic.h>
-#ifdef CONFIG_X86_32
-#include <mach_apicdef.h>
-#endif
 
 /*
  * Checksum an MP configuration block.
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 6485e57e29b..07817b2a787 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -5,7 +5,6 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/mach-default/mach_apicdef.h>
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
-- 
cgit v1.2.3


From 328386d7ab600aa0993a1226f5817ac30a735724 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:50:18 +0100
Subject: x86, smp: refactor ->wake_cpu

- remove macro wrappers

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_apic.h | 2 --
 arch/x86/include/asm/mach-generic/mach_apic.h | 2 --
 arch/x86/kernel/setup.c                       | 5 ++---
 arch/x86/kernel/smpboot.c                     | 4 ++--
 4 files changed, 4 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
index b60b767d5be..bae053cdcde 100644
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ b/arch/x86/include/asm/mach-default/mach_apic.h
@@ -19,10 +19,8 @@ static inline const struct cpumask *default_target_cpus(void)
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
 #define read_apic_id()  (apic->get_apic_id(apic_read(APIC_ID)))
-#define wakeup_secondary_cpu (apic->wakeup_cpu)
 extern void default_setup_apic_routing(void);
 #else
-#define wakeup_secondary_cpu wakeup_secondary_cpu_via_init
 /*
  * Set up the logical destination ID.
  *
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
index ca460e45991..96f217f819e 100644
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ b/arch/x86/include/asm/mach-generic/mach_apic.h
@@ -3,8 +3,6 @@
 
 #include <asm/genapic.h>
 
-#define wakeup_secondary_cpu (apic->wakeup_cpu)
-
 extern void generic_bigsmp_probe(void);
 
 #endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index a58e9f5e603..6b27f6dc7bf 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -589,9 +589,8 @@ early_param("elfcorehdr", setup_elfcorehdr);
 static int __init default_update_genapic(void)
 {
 #ifdef CONFIG_X86_SMP
-# if defined(CONFIG_X86_GENERICARCH) || defined(CONFIG_X86_64)
-	apic->wakeup_cpu = wakeup_secondary_cpu_via_init;
-# endif
+	if (!apic->wakeup_cpu)
+		apic->wakeup_cpu = wakeup_secondary_cpu_via_init;
 #endif
 
 	return 0;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 1fdc1a7e7b5..3fed177f345 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -750,7 +750,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
  * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
- * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
+ * Returns zero if CPU booted OK, else error code from ->wakeup_cpu.
  */
 {
 	unsigned long boot_error = 0;
@@ -841,7 +841,7 @@ do_rest:
 	/*
 	 * Starting actual IPI sequence...
 	 */
-	boot_error = wakeup_secondary_cpu(apicid, start_ip);
+	boot_error = apic->wakeup_cpu(apicid, start_ip);
 
 	if (!boot_error) {
 		/*
-- 
cgit v1.2.3


From 5a44632f77a9c867621f7bf80c233eac75fea672 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 18:47:24 +0100
Subject: x86, numaq: consolidate code

Move all the NUMAQ subarch definitions into numaq.c. With this it
ceases to depend on build-time subarch features.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/numaq/apic.h    | 122 -------------------------
 arch/x86/include/asm/numaq/apicdef.h |   9 --
 arch/x86/include/asm/numaq/ipi.h     |  22 -----
 arch/x86/include/asm/numaq/mpparse.h |   6 --
 arch/x86/include/asm/numaq/wakecpu.h |  28 ------
 arch/x86/mach-generic/numaq.c        | 171 ++++++++++++++++++++++++++++++++++-
 arch/x86/pci/numaq_32.c              |   2 +-
 7 files changed, 167 insertions(+), 193 deletions(-)
 delete mode 100644 arch/x86/include/asm/numaq/apic.h
 delete mode 100644 arch/x86/include/asm/numaq/apicdef.h
 delete mode 100644 arch/x86/include/asm/numaq/ipi.h
 delete mode 100644 arch/x86/include/asm/numaq/mpparse.h
 delete mode 100644 arch/x86/include/asm/numaq/wakecpu.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h
deleted file mode 100644
index ce95e79f723..00000000000
--- a/arch/x86/include/asm/numaq/apic.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef __ASM_NUMAQ_APIC_H
-#define __ASM_NUMAQ_APIC_H
-
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *numaq_target_cpus(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static inline unsigned long
-numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-static inline unsigned long numaq_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline int numaq_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void numaq_init_apic_ldr(void)
-{
-	/* Already done in NUMA-Q firmware */
-}
-
-static inline void numaq_setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"NUMA-Q", nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int numaq_multi_timer_check(int apic, int irq)
-{
-	return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
-}
-
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-
-static inline int numaq_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int numaq_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < 60)
-		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
-	else
-		return BAD_APICID;
-}
-
-static inline int numaq_apicid_to_node(int logical_apicid) 
-{
-	return logical_apicid >> 4;
-}
-
-static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
-{
-	int node = numaq_apicid_to_node(logical_apicid);
-	int cpu = __ffs(logical_apicid & 0xf);
-
-	return physid_mask_of_physid(cpu + 4*node);
-}
-
-extern void *xquad_portio;
-
-static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return 0x0F;
-}
-
-static inline unsigned int
-numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			     const struct cpumask *andmask)
-{
-	return 0x0F;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_NUMAQ_APIC_H */
diff --git a/arch/x86/include/asm/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h
deleted file mode 100644
index cd927d5bd50..00000000000
--- a/arch/x86/include/asm/numaq/apicdef.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_NUMAQ_APICDEF_H
-#define __ASM_NUMAQ_APICDEF_H
-
-static inline unsigned int numaq_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0x0F;
-}
-
-#endif
diff --git a/arch/x86/include/asm/numaq/ipi.h b/arch/x86/include/asm/numaq/ipi.h
deleted file mode 100644
index 5dbc4b4cd5e..00000000000
--- a/arch/x86/include/asm/numaq/ipi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_NUMAQ_IPI_H
-#define __ASM_NUMAQ_IPI_H
-
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void numaq_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void numaq_send_IPI_all(int vector)
-{
-	numaq_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_NUMAQ_IPI_H */
diff --git a/arch/x86/include/asm/numaq/mpparse.h b/arch/x86/include/asm/numaq/mpparse.h
deleted file mode 100644
index a2eeefcd1cc..00000000000
--- a/arch/x86/include/asm/numaq/mpparse.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_NUMAQ_MPPARSE_H
-#define __ASM_NUMAQ_MPPARSE_H
-
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
-#endif /* __ASM_NUMAQ_MPPARSE_H */
diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h
deleted file mode 100644
index afe81439c7d..00000000000
--- a/arch/x86/include/asm/numaq/wakecpu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASM_NUMAQ_WAKECPU_H
-#define __ASM_NUMAQ_WAKECPU_H
-
-/* This file copes with machines that wakeup secondary CPUs by NMIs */
-
-#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
-#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
- */
-static inline void numaq_smp_callin_clear_local_apic(void)
-{
-	clear_local_APIC();
-}
-
-static inline void
-numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Storing NMI vector\n");
-	*high =
-	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
-	*low =
-	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
-}
-
-#endif /* __ASM_NUMAQ_WAKECPU_H */
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
index ddb50fba286..c221cfb2c2d 100644
--- a/arch/x86/mach-generic/numaq.c
+++ b/arch/x86/mach-generic/numaq.c
@@ -11,14 +11,175 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <asm/numaq/apicdef.h>
+#include <linux/numa.h>
 #include <linux/smp.h>
-#include <asm/numaq/apic.h>
-#include <asm/numaq/ipi.h>
-#include <asm/numaq/mpparse.h>
-#include <asm/numaq/wakecpu.h>
 #include <asm/numaq.h>
+#include <asm/io.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
 
+#define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline unsigned int numaq_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0x0F;
+}
+
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+
+static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void numaq_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+}
+
+static inline void numaq_send_IPI_all(int vector)
+{
+	numaq_send_IPI_mask(cpu_online_mask, vector);
+}
+
+extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
+
+#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
+ */
+static inline void numaq_smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline void
+numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Storing NMI vector\n");
+	*high =
+	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
+	*low =
+	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
+}
+
+static inline const cpumask_t *numaq_target_cpus(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static inline unsigned long
+numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long numaq_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline int numaq_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void numaq_init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void numaq_setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"NUMA-Q", nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int numaq_multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+/* Mapping from cpu number to logical apicid */
+extern u8 cpu_2_logical_apicid[];
+
+static inline int numaq_cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int numaq_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int numaq_apicid_to_node(int logical_apicid) 
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
+{
+	int node = numaq_apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+extern void *xquad_portio;
+
+static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	return 0x0F;
+}
+
+static inline unsigned int
+numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			     const struct cpumask *andmask)
+{
+	return 0x0F;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
 static int __numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	numaq_mps_oem_check(mpc, oem, productid);
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 2089354968a..1b2d773612e 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -5,7 +5,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/nodemask.h>
-#include <mach_apic.h>
+#include <asm/genapic.h>
 #include <asm/mpspec.h>
 #include <asm/pci_x86.h>
 
-- 
cgit v1.2.3


From b11b867f78910192fc54bd0d09148cf768c7aaad Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 18:49:31 +0100
Subject: x86, summit: consolidate code

Consolidate all the Summit code into a single file:
arch/x86/kernel/summit_32.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/summit/apic.h    | 195 ----------------
 arch/x86/include/asm/summit/apicdef.h |   9 -
 arch/x86/include/asm/summit/ipi.h     |  26 ---
 arch/x86/include/asm/summit/mpparse.h | 109 ---------
 arch/x86/kernel/summit_32.c           | 417 +++++++++++++++++++++++++++++++++-
 arch/x86/mach-generic/Makefile        |   1 -
 arch/x86/mach-generic/summit.c        |  94 --------
 7 files changed, 416 insertions(+), 435 deletions(-)
 delete mode 100644 arch/x86/include/asm/summit/apic.h
 delete mode 100644 arch/x86/include/asm/summit/apicdef.h
 delete mode 100644 arch/x86/include/asm/summit/ipi.h
 delete mode 100644 arch/x86/include/asm/summit/mpparse.h
 delete mode 100644 arch/x86/mach-generic/summit.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
deleted file mode 100644
index 15b8dbd19e1..00000000000
--- a/arch/x86/include/asm/summit/apic.h
+++ /dev/null
@@ -1,195 +0,0 @@
-#ifndef __ASM_SUMMIT_APIC_H
-#define __ASM_SUMMIT_APIC_H
-
-#include <asm/smp.h>
-#include <linux/gfp.h>
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *summit_target_cpus(void)
-{
-	/* CPU_MASK_ALL (0xff) has undefined behaviour with
-	 * dest_LowestPrio mode logical clustered apic interrupt routing
-	 * Just start on cpu 0.  IRQ balancing will spread load
-	 */
-	return &cpumask_of_cpu(0);
-}
-
-static inline unsigned long
-summit_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long summit_check_apicid_present(int bit)
-{
-	return 1;
-}
-
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
-extern u8 cpu_2_logical_apicid[];
-
-static inline void summit_init_apic_ldr(void)
-{
-	unsigned long val, id;
-	int count = 0;
-	u8 my_id = (u8)hard_smp_processor_id();
-	u8 my_cluster = (u8)apicid_cluster(my_id);
-#ifdef CONFIG_SMP
-	u8 lid;
-	int i;
-
-	/* Create logical APIC IDs by counting CPUs already in cluster. */
-	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
-		lid = cpu_2_logical_apicid[i];
-		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
-			++count;
-	}
-#endif
-	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
-	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
-	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
-	id = my_cluster | (1UL << count);
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static inline int summit_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void summit_setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
-						nr_ioapics);
-}
-
-static inline int summit_apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int summit_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline int summit_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t
-summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
-}
-
-static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
-{
-	return physid_mask_of_physid(0);
-}
-
-static inline void summit_setup_portio_remap(void)
-{
-}
-
-static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set >= nr_cpu_ids)
-		return 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = summit_cpu_to_logical_apicid(cpu);
-
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = summit_cpu_to_logical_apicid(cpu);
-
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
-
-				return 0xFF;
-			}
-			apicid = apicid | new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline unsigned int
-summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
-			      const struct cpumask *andmask)
-{
-	int apicid = summit_cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = summit_cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-
-	return apicid;
-}
-
-/*
- * cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value.  For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-#endif /* __ASM_SUMMIT_APIC_H */
diff --git a/arch/x86/include/asm/summit/apicdef.h b/arch/x86/include/asm/summit/apicdef.h
deleted file mode 100644
index c24b0df2dec..00000000000
--- a/arch/x86/include/asm/summit/apicdef.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_SUMMIT_APICDEF_H
-#define __ASM_SUMMIT_APICDEF_H
-
-static inline unsigned summit_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-#endif
diff --git a/arch/x86/include/asm/summit/ipi.h b/arch/x86/include/asm/summit/ipi.h
deleted file mode 100644
index f87a43fe0ae..00000000000
--- a/arch/x86/include/asm/summit/ipi.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_SUMMIT_IPI_H
-#define __ASM_SUMMIT_IPI_H
-
-void default_send_IPI_mask_sequence(const cpumask_t *mask, int vector);
-void default_send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
-
-static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void summit_send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-
-	if (!cpus_empty(mask))
-		summit_send_IPI_mask(&mask, vector);
-}
-
-static inline void summit_send_IPI_all(int vector)
-{
-	summit_send_IPI_mask(&cpu_online_map, vector);
-}
-
-#endif /* __ASM_SUMMIT_IPI_H */
diff --git a/arch/x86/include/asm/summit/mpparse.h b/arch/x86/include/asm/summit/mpparse.h
deleted file mode 100644
index 4bbcce39acb..00000000000
--- a/arch/x86/include/asm/summit/mpparse.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef __ASM_SUMMIT_MPPARSE_H
-#define __ASM_SUMMIT_MPPARSE_H
-
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
-#else
-#define setup_summit()	{}
-#endif
-
-static inline int
-summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	if (!strncmp(oem, "IBM ENSW", 8) &&
-			(!strncmp(productid, "VIGIL SMP", 9)
-			 || !strncmp(productid, "EXA", 3)
-			 || !strncmp(productid, "RUTHLESS SMP", 12))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (!strncmp(oem_id, "IBM", 3) &&
-	    (!strncmp(oem_table_id, "SERVIGIL", 8)
-	     || !strncmp(oem_table_id, "EXA", 3))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-struct rio_table_hdr {
-	unsigned char version;      /* Version number of this data structure           */
-	                            /* Version 3 adds chassis_num & WP_index           */
-	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
-	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
-} __attribute__((packed));
-
-struct scal_detail {
-	unsigned char node_id;      /* Scalability Node ID                             */
-	unsigned long CBAR;         /* Address of 1MB register space                   */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
-} __attribute__((packed));
-
-struct rio_detail {
-	unsigned char node_id;      /* RIO Node ID                                     */
-	unsigned long BBAR;         /* Address of 1MB register space                   */
-	unsigned char type;         /* Type of device                                  */
-	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
-	                            /* For CYC:  Node ID of Twister that owns this CYC */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
-	                            /* For CYC:  0                                     */
-	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
-	                            /*                 = 0 : the XAPIC is not used, ie:*/
-	                            /*                     ints fwded to another XAPIC */
-	                            /*           Bits1:7 Reserved                      */
-	                            /* For CYC:  Bits0:7 Reserved                      */
-	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
-	                            /*           lower slot numbers/PCI bus numbers    */
-	                            /* For CYC:  No meaning                            */
-	unsigned char chassis_num;  /* 1 based Chassis number                          */
-	                            /* For LookOut WPEGs this field indicates the      */
-	                            /* Expansion Chassis #, enumerated from Boot       */
-	                            /* Node WPEG external port, then Boot Node CYC     */
-	                            /* external port, then Next Vigil chassis WPEG     */
-	                            /* external port, etc.                             */
-	                            /* Shared Lookouts have only 1 chassis number (the */
-	                            /* first one assigned)                             */
-} __attribute__((packed));
-
-
-typedef enum {
-	CompatTwister = 0,  /* Compatibility Twister               */
-	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
-	CompatCyclone = 2,  /* Compatibility Cyclone               */
-	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
-	CompatWPEG    = 4,  /* Compatibility WPEG                  */
-	AltWPEG       = 5,  /* Second Planar WPEG                  */
-	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
-	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
-	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
-		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-#endif /* __ASM_SUMMIT_MPPARSE_H */
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 7b987852e87..3b60dd5e57f 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -30,7 +30,364 @@
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/bios_ebda.h>
-#include <asm/summit/mpparse.h>
+
+/*
+ * APIC driver for the IBM "Summit" chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <asm/smp.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/smp.h>
+
+static inline unsigned summit_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+void default_send_IPI_mask_sequence(const cpumask_t *mask, int vector);
+void default_send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
+
+static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
+{
+	default_send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void summit_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		summit_send_IPI_mask(&mask, vector);
+}
+
+static inline void summit_send_IPI_all(int vector)
+{
+	summit_send_IPI_mask(&cpu_online_map, vector);
+}
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit()	{}
+#endif
+
+static inline int
+summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (!strncmp(oem, "IBM ENSW", 8) &&
+			(!strncmp(productid, "VIGIL SMP", 9)
+			 || !strncmp(productid, "EXA", 3)
+			 || !strncmp(productid, "RUTHLESS SMP", 12))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) &&
+	    (!strncmp(oem_table_id, "SERVIGIL", 8)
+	     || !strncmp(oem_table_id, "EXA", 3))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+struct rio_table_hdr {
+	unsigned char version;      /* Version number of this data structure           */
+	                            /* Version 3 adds chassis_num & WP_index           */
+	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
+	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
+} __attribute__((packed));
+
+struct scal_detail {
+	unsigned char node_id;      /* Scalability Node ID                             */
+	unsigned long CBAR;         /* Address of 1MB register space                   */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
+} __attribute__((packed));
+
+struct rio_detail {
+	unsigned char node_id;      /* RIO Node ID                                     */
+	unsigned long BBAR;         /* Address of 1MB register space                   */
+	unsigned char type;         /* Type of device                                  */
+	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+	                            /* For CYC:  Node ID of Twister that owns this CYC */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
+	                            /* For CYC:  0                                     */
+	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
+	                            /*                 = 0 : the XAPIC is not used, ie:*/
+	                            /*                     ints fwded to another XAPIC */
+	                            /*           Bits1:7 Reserved                      */
+	                            /* For CYC:  Bits0:7 Reserved                      */
+	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
+	                            /*           lower slot numbers/PCI bus numbers    */
+	                            /* For CYC:  No meaning                            */
+	unsigned char chassis_num;  /* 1 based Chassis number                          */
+	                            /* For LookOut WPEGs this field indicates the      */
+	                            /* Expansion Chassis #, enumerated from Boot       */
+	                            /* Node WPEG external port, then Boot Node CYC     */
+	                            /* external port, then Next Vigil chassis WPEG     */
+	                            /* external port, etc.                             */
+	                            /* Shared Lookouts have only 1 chassis number (the */
+	                            /* first one assigned)                             */
+} __attribute__((packed));
+
+
+typedef enum {
+	CompatTwister = 0,  /* Compatibility Twister               */
+	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
+	CompatCyclone = 2,  /* Compatibility Cyclone               */
+	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
+	CompatWPEG    = 4,  /* Compatibility WPEG                  */
+	AltWPEG       = 5,  /* Second Planar WPEG                  */
+	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
+	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define SUMMIT_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline const cpumask_t *summit_target_cpus(void)
+{
+	/* CPU_MASK_ALL (0xff) has undefined behaviour with
+	 * dest_LowestPrio mode logical clustered apic interrupt routing
+	 * Just start on cpu 0.  IRQ balancing will spread load
+	 */
+	return &cpumask_of_cpu(0);
+}
+
+static inline unsigned long
+summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long summit_check_apicid_present(int bit)
+{
+	return 1;
+}
+
+#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
+
+extern u8 cpu_2_logical_apicid[];
+
+static inline void summit_init_apic_ldr(void)
+{
+	unsigned long val, id;
+	int count = 0;
+	u8 my_id = (u8)hard_smp_processor_id();
+	u8 my_cluster = (u8)apicid_cluster(my_id);
+#ifdef CONFIG_SMP
+	u8 lid;
+	int i;
+
+	/* Create logical APIC IDs by counting CPUs already in cluster. */
+	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
+		lid = cpu_2_logical_apicid[i];
+		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+			++count;
+	}
+#endif
+	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
+	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+	id = my_cluster | (1UL << count);
+	apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static inline int summit_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void summit_setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+						nr_ioapics);
+}
+
+static inline int summit_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int summit_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline int summit_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids)
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t
+summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0x0F);
+}
+
+static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(0);
+}
+
+static inline void summit_setup_portio_remap(void)
+{
+}
+
+static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpus_weight(*cpumask);
+	/* Return id to all */
+	if (num_bits_set >= nr_cpu_ids)
+		return 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = first_cpu(*cpumask);
+	apicid = summit_cpu_to_logical_apicid(cpu);
+
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, *cpumask)) {
+			int new_apicid = summit_cpu_to_logical_apicid(cpu);
+
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return 0xFF;
+			}
+			apicid = apicid | new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static inline unsigned int
+summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
+{
+	int apicid = summit_cpu_to_logical_apicid(0);
+	cpumask_var_t cpumask;
+
+	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+		return apicid;
+
+	cpumask_and(cpumask, inmask, andmask);
+	cpumask_and(cpumask, cpumask, cpu_online_mask);
+	apicid = summit_cpu_mask_to_apicid(cpumask);
+
+	free_cpumask_var(cpumask);
+
+	return apicid;
+}
+
+/*
+ * cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value.  For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+static int probe_summit(void)
+{
+	/* probed later in mptable/ACPI hooks */
+	return 0;
+}
+
+static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
 
 static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
@@ -186,3 +543,61 @@ void __init setup_summit(void)
 			next_wpeg = 0;
 	} while (next_wpeg != 0);
 }
+
+
+struct genapic apic_summit = {
+
+	.name				= "summit",
+	.probe				= probe_summit,
+	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
+	.apic_id_registered		= summit_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= summit_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= summit_check_apicid_used,
+	.check_apicid_present		= summit_check_apicid_present,
+
+	.vector_allocation_domain	= summit_vector_allocation_domain,
+	.init_apic_ldr			= summit_init_apic_ldr,
+
+	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
+	.setup_apic_routing		= summit_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= summit_apicid_to_node,
+	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= summit_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= summit_phys_pkg_id,
+	.mps_oem_check			= summit_mps_oem_check,
+
+	.get_apic_id			= summit_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= summit_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= summit_send_IPI_allbutself,
+	.send_IPI_all			= summit_send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+};
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 6730f4e7c74..78ab5735cb8 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -6,6 +6,5 @@ EXTRA_CFLAGS			:= -Iarch/x86/kernel
 
 obj-y				:= probe.o default.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
-obj-$(CONFIG_X86_SUMMIT)	+= summit.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
 obj-$(CONFIG_X86_ES7000)	+= es7000.o
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
deleted file mode 100644
index 673a64f8b46..00000000000
--- a/arch/x86/mach-generic/summit.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * APIC driver for the IBM "Summit" chipset.
- */
-#define APIC_DEFINITION 1
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/genapic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <asm/summit/apicdef.h>
-#include <linux/smp.h>
-#include <asm/summit/apic.h>
-#include <asm/summit/ipi.h>
-#include <asm/summit/mpparse.h>
-
-static int probe_summit(void)
-{
-	/* probed later in mptable/ACPI hooks */
-	return 0;
-}
-
-static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-struct genapic apic_summit = {
-
-	.name				= "summit",
-	.probe				= probe_summit,
-	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
-	.apic_id_registered		= summit_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* logical delivery broadcast to all CPUs: */
-	.irq_dest_mode			= 1,
-
-	.target_cpus			= summit_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= summit_check_apicid_used,
-	.check_apicid_present		= summit_check_apicid_present,
-
-	.vector_allocation_domain	= summit_vector_allocation_domain,
-	.init_apic_ldr			= summit_init_apic_ldr,
-
-	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
-	.setup_apic_routing		= summit_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= summit_apicid_to_node,
-	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= summit_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= summit_phys_pkg_id,
-	.mps_oem_check			= summit_mps_oem_check,
-
-	.get_apic_id			= summit_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= summit_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= summit_send_IPI_allbutself,
-	.send_IPI_all			= summit_send_IPI_all,
-	.send_IPI_self			= NULL,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
-	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-};
-- 
cgit v1.2.3


From 42990701f938b9318e46102d9919ceb28e5b0e6d Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 20 Jan 2009 21:14:37 +0000
Subject: sh: Relax inline assembly constraints

When dereferencing the memory address contained in a register and
modifying the value at that memory address, the register should not be
listed in the inline asm outputs. The value at the memory address is an
output (which is taken care of with the "memory" clobber), not the register.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/bitops-llsc.h  | 72 +++++++++++++++++++-------------------
 arch/sh/include/asm/cmpxchg-llsc.h | 38 ++++++++++----------
 2 files changed, 55 insertions(+), 55 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/bitops-llsc.h b/arch/sh/include/asm/bitops-llsc.h
index 1d2fc0b010a..d8328be0619 100644
--- a/arch/sh/include/asm/bitops-llsc.h
+++ b/arch/sh/include/asm/bitops-llsc.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_BITOPS_LLSC_H
 #define __ASM_SH_BITOPS_LLSC_H
 
-static inline void set_bit(int nr, volatile void * addr)
+static inline void set_bit(int nr, volatile void *addr)
 {
 	int	mask;
 	volatile unsigned int *a = addr;
@@ -13,16 +13,16 @@ static inline void set_bit(int nr, volatile void * addr)
 	__asm__ __volatile__ (
 		"1:						\n\t"
 		"movli.l	@%1, %0	! set_bit		\n\t"
-		"or		%3, %0				\n\t"
+		"or		%2, %0				\n\t"
 		"movco.l	%0, @%1				\n\t"
 		"bf		1b				\n\t"
-		: "=&z" (tmp), "=r" (a)
-		: "1" (a), "r" (mask)
+		: "=&z" (tmp)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 }
 
-static inline void clear_bit(int nr, volatile void * addr)
+static inline void clear_bit(int nr, volatile void *addr)
 {
 	int	mask;
 	volatile unsigned int *a = addr;
@@ -34,16 +34,16 @@ static inline void clear_bit(int nr, volatile void * addr)
 	__asm__ __volatile__ (
 		"1:						\n\t"
 		"movli.l	@%1, %0	! clear_bit		\n\t"
-		"and		%3, %0				\n\t"
+		"and		%2, %0				\n\t"
 		"movco.l	%0, @%1				\n\t"
 		"bf		1b				\n\t"
-		: "=&z" (tmp), "=r" (a)
-		: "1" (a), "r" (~mask)
+		: "=&z" (tmp)
+		: "r" (a), "r" (~mask)
 		: "t", "memory"
 	);
 }
 
-static inline void change_bit(int nr, volatile void * addr)
+static inline void change_bit(int nr, volatile void *addr)
 {
 	int	mask;
 	volatile unsigned int *a = addr;
@@ -55,16 +55,16 @@ static inline void change_bit(int nr, volatile void * addr)
 	__asm__ __volatile__ (
 		"1:						\n\t"
 		"movli.l	@%1, %0	! change_bit		\n\t"
-		"xor		%3, %0				\n\t"
+		"xor		%2, %0				\n\t"
 		"movco.l	%0, @%1				\n\t"
 		"bf		1b				\n\t"
-		: "=&z" (tmp), "=r" (a)
-		: "1" (a), "r" (mask)
+		: "=&z" (tmp)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 }
 
-static inline int test_and_set_bit(int nr, volatile void * addr)
+static inline int test_and_set_bit(int nr, volatile void *addr)
 {
 	int	mask, retval;
 	volatile unsigned int *a = addr;
@@ -75,21 +75,21 @@ static inline int test_and_set_bit(int nr, volatile void * addr)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! test_and_set_bit	\n\t"
-		"mov		%0, %2				\n\t"
-		"or		%4, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movli.l	@%2, %0	! test_and_set_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"or		%3, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
-		"and		%4, %2				\n\t"
-		: "=&z" (tmp), "=r" (a), "=&r" (retval)
-		: "1" (a), "r" (mask)
+		"and		%3, %1				\n\t"
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 
 	return retval != 0;
 }
 
-static inline int test_and_clear_bit(int nr, volatile void * addr)
+static inline int test_and_clear_bit(int nr, volatile void *addr)
 {
 	int	mask, retval;
 	volatile unsigned int *a = addr;
@@ -100,22 +100,22 @@ static inline int test_and_clear_bit(int nr, volatile void * addr)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! test_and_clear_bit	\n\t"
-		"mov		%0, %2				\n\t"
-		"and		%5, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movli.l	@%2, %0	! test_and_clear_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"and		%4, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
-		"and		%4, %2				\n\t"
+		"and		%3, %1				\n\t"
 		"synco						\n\t"
-		: "=&z" (tmp), "=r" (a), "=&r" (retval)
-		: "1" (a), "r" (mask), "r" (~mask)
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask), "r" (~mask)
 		: "t", "memory"
 	);
 
 	return retval != 0;
 }
 
-static inline int test_and_change_bit(int nr, volatile void * addr)
+static inline int test_and_change_bit(int nr, volatile void *addr)
 {
 	int	mask, retval;
 	volatile unsigned int *a = addr;
@@ -126,15 +126,15 @@ static inline int test_and_change_bit(int nr, volatile void * addr)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! test_and_change_bit	\n\t"
-		"mov		%0, %2				\n\t"
-		"xor		%4, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movli.l	@%2, %0	! test_and_change_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"xor		%3, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
-		"and		%4, %2				\n\t"
+		"and		%3, %1				\n\t"
 		"synco						\n\t"
-		: "=&z" (tmp), "=r" (a), "=&r" (retval)
-		: "1" (a), "r" (mask)
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
index aee3bf28658..0fac3da536c 100644
--- a/arch/sh/include/asm/cmpxchg-llsc.h
+++ b/arch/sh/include/asm/cmpxchg-llsc.h
@@ -8,14 +8,14 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
 
 	__asm__ __volatile__ (
 		"1:					\n\t"
-		"movli.l	@%1, %0	! xchg_u32	\n\t"
-		"mov		%0, %2			\n\t"
-		"mov		%4, %0			\n\t"
-		"movco.l	%0, @%1			\n\t"
+		"movli.l	@%2, %0	! xchg_u32	\n\t"
+		"mov		%0, %1			\n\t"
+		"mov		%3, %0			\n\t"
+		"movco.l	%0, @%2			\n\t"
 		"bf		1b			\n\t"
 		"synco					\n\t"
-		: "=&z"(tmp), "=r" (m), "=&r" (retval)
-		: "1" (m), "r" (val)
+		: "=&z"(tmp), "=&r" (retval)
+		: "r" (m), "r" (val)
 		: "t", "memory"
 	);
 
@@ -29,14 +29,14 @@ static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
 
 	__asm__ __volatile__ (
 		"1:					\n\t"
-		"movli.l	@%1, %0	! xchg_u8	\n\t"
-		"mov		%0, %2			\n\t"
-		"mov		%4, %0			\n\t"
-		"movco.l	%0, @%1			\n\t"
+		"movli.l	@%2, %0	! xchg_u8	\n\t"
+		"mov		%0, %1			\n\t"
+		"mov		%3, %0			\n\t"
+		"movco.l	%0, @%2			\n\t"
 		"bf		1b			\n\t"
 		"synco					\n\t"
-		: "=&z"(tmp), "=r" (m), "=&r" (retval)
-		: "1" (m), "r" (val & 0xff)
+		: "=&z"(tmp), "=&r" (retval)
+		: "r" (m), "r" (val & 0xff)
 		: "t", "memory"
 	);
 
@@ -51,17 +51,17 @@ __cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! __cmpxchg_u32		\n\t"
-		"mov		%0, %2				\n\t"
-		"cmp/eq		%2, %4				\n\t"
+		"movli.l	@%2, %0	! __cmpxchg_u32		\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/eq		%1, %3				\n\t"
 		"bf		2f				\n\t"
-		"mov		%5, %0				\n\t"
+		"mov		%3, %0				\n\t"
 		"2:						\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
 		"synco						\n\t"
-		: "=&z" (tmp), "=r" (m), "=&r" (retval)
-		: "1" (m), "r" (old), "r" (new)
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (m), "r" (old), "r" (new)
 		: "t", "memory"
 	);
 
-- 
cgit v1.2.3


From 84fdf6cda30df72994baa2496da86787fb44cbb4 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 20 Jan 2009 21:14:38 +0000
Subject: sh: Use the atomic_t "counter" member

Now that atomic_t is a generic opaque type for all architectures, it is
unwise to use intimate knowledge of its internals when manipulating it.

Instead of relying on the "counter" member being at offset 0 from the
beginning of an atomic_t, explicitly reference the member. This guards
us from any changes to the layout of the beginning of the atomic_t type.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/atomic-irq.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
index 74f7943cff6..a0b348068ca 100644
--- a/arch/sh/include/asm/atomic-irq.h
+++ b/arch/sh/include/asm/atomic-irq.h
@@ -11,7 +11,7 @@ static inline void atomic_add(int i, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v += i;
+	v->counter += i;
 	local_irq_restore(flags);
 }
 
@@ -20,7 +20,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v -= i;
+	v->counter -= i;
 	local_irq_restore(flags);
 }
 
@@ -29,9 +29,9 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	unsigned long temp, flags;
 
 	local_irq_save(flags);
-	temp = *(long *)v;
+	temp = v->counter;
 	temp += i;
-	*(long *)v = temp;
+	v->counter = temp;
 	local_irq_restore(flags);
 
 	return temp;
@@ -42,9 +42,9 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	unsigned long temp, flags;
 
 	local_irq_save(flags);
-	temp = *(long *)v;
+	temp = v->counter;
 	temp -= i;
-	*(long *)v = temp;
+	v->counter = temp;
 	local_irq_restore(flags);
 
 	return temp;
@@ -55,7 +55,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v &= ~mask;
+	v->counter &= ~mask;
 	local_irq_restore(flags);
 }
 
@@ -64,7 +64,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v |= mask;
+	v->counter |= mask;
 	local_irq_restore(flags);
 }
 
-- 
cgit v1.2.3


From a448720ca3248e8a7a426336885549d6e923fd8e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 15:42:23 -0800
Subject: x86: unify asm/io.h: IO_SPACE_LIMIT

Impact: Cleanup (trivial unification)

Move common define IO_SPACE_LIMIT from <asm/io_*.h> to <asm/io.h>.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/io.h    | 1 +
 arch/x86/include/asm/io_32.h | 2 --
 arch/x86/include/asm/io_64.h | 2 --
 3 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 05cfed4485f..975207c08b3 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -106,5 +106,6 @@ extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
 extern void early_iounmap(void __iomem *addr, unsigned long size);
 extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
+#define IO_SPACE_LIMIT 0xffff
 
 #endif /* _ASM_X86_IO_H */
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
index d8e242e1b39..e08d8ed05a1 100644
--- a/arch/x86/include/asm/io_32.h
+++ b/arch/x86/include/asm/io_32.h
@@ -37,8 +37,6 @@
   *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
   */
 
-#define IO_SPACE_LIMIT 0xffff
-
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
index 563c16270ba..1131d8ea2c6 100644
--- a/arch/x86/include/asm/io_64.h
+++ b/arch/x86/include/asm/io_64.h
@@ -136,8 +136,6 @@ __OUTS(b)
 __OUTS(w)
 __OUTS(l)
 
-#define IO_SPACE_LIMIT 0xffff
-
 #if defined(__KERNEL__) && defined(__x86_64__)
 
 #include <linux/vmalloc.h>
-- 
cgit v1.2.3


From dc66ff6220f0a6c938df41add526d645852d9a75 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 22 Jan 2009 15:16:14 +0000
Subject: SH: fix start_thread and user_stack_pointer macros

Fix macros start_thread and user_stack_pointer.
When these macros aren't called with a variable named regs as second
argument, this will result in a build failure.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/kprobes.h      |  2 +-
 arch/sh/include/asm/processor_32.h | 12 ++++++------
 arch/sh/include/asm/processor_64.h | 14 +++++++-------
 3 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
index 6078d8e551d..613644a758e 100644
--- a/arch/sh/include/asm/kprobes.h
+++ b/arch/sh/include/asm/kprobes.h
@@ -16,7 +16,7 @@ typedef u16 kprobe_opcode_t;
 	? (MAX_STACK_SIZE) \
 	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
 
-#define regs_return_value(regs)		((regs)->regs[0])
+#define regs_return_value(_regs)		((_regs)->regs[0])
 #define flush_insn_slot(p)		do { } while (0)
 #define kretprobe_blacklist_size	0
 
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index d79063c5eb9..dcaed24c71f 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -108,12 +108,12 @@ extern int ubc_usercnt;
 /*
  * Do necessary setup to start up a newly executed thread.
  */
-#define start_thread(regs, new_pc, new_sp)	 \
+#define start_thread(_regs, new_pc, new_sp)	 \
 	set_fs(USER_DS);			 \
-	regs->pr = 0;				 \
-	regs->sr = SR_FD;	/* User mode. */ \
-	regs->pc = new_pc;			 \
-	regs->regs[15] = new_sp
+	_regs->pr = 0;				 \
+	_regs->sr = SR_FD;	/* User mode. */ \
+	_regs->pc = new_pc;			 \
+	_regs->regs[15] = new_sp
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -189,7 +189,7 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
 #define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
 
-#define user_stack_pointer(regs)	((regs)->regs[15])
+#define user_stack_pointer(_regs)	((_regs)->regs[15])
 
 #if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
     defined(CONFIG_CPU_SH4)
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
index 803177fcf08..5727d31b0cc 100644
--- a/arch/sh/include/asm/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -145,13 +145,13 @@ struct thread_struct {
  */
 #define SR_USER (SR_MMU | SR_FD)
 
-#define start_thread(regs, new_pc, new_sp)			\
+#define start_thread(_regs, new_pc, new_sp)			\
 	set_fs(USER_DS);					\
-	regs->sr = SR_USER;	/* User mode. */		\
-	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
-	regs->pc |= 1;		/* Set SHmedia ! */		\
-	regs->regs[18] = 0;					\
-	regs->regs[15] = new_sp
+	_regs->sr = SR_USER;	/* User mode. */		\
+	_regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	_regs->pc |= 1;		/* Set SHmedia ! */		\
+	_regs->regs[18] = 0;					\
+	_regs->regs[15] = new_sp
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -226,7 +226,7 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  ((tsk)->thread.pc)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define user_stack_pointer(regs)	((regs)->regs[15])
+#define user_stack_pointer(_regs)	((_regs)->regs[15])
 
 #endif	/* __ASSEMBLY__ */
 #endif /* __ASM_SH_PROCESSOR_64_H */
-- 
cgit v1.2.3


From 955c0778723501cc16fec40501cd54b7e72d3e74 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 22 Jan 2009 09:55:31 +0000
Subject: sh: rework clocksource and sched_clock

Rework and simplify the sched_clock and clocksource code. Instead
of registering the clocksource in a shared file we move it into the
tmu driver. Also, add code to handle sched_clock in the case of no
clocksource.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/timer.h       |  4 +--
 arch/sh/kernel/time_32.c          | 59 ++++++---------------------------------
 arch/sh/kernel/timers/timer-tmu.c | 10 +++++--
 3 files changed, 19 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h
index a7ca3a195bb..4c3b66e30af 100644
--- a/arch/sh/include/asm/timer.h
+++ b/arch/sh/include/asm/timer.h
@@ -9,7 +9,6 @@ struct sys_timer_ops {
 	int (*init)(void);
 	int (*start)(void);
 	int (*stop)(void);
-	cycle_t (*read)(void);
 #ifndef CONFIG_GENERIC_TIME
 	unsigned long (*get_offset)(void);
 #endif
@@ -39,6 +38,7 @@ struct sys_timer *get_sys_timer(void);
 
 /* arch/sh/kernel/time.c */
 void handle_timer_tick(void);
-extern unsigned long sh_hpt_frequency;
+
+extern struct clocksource clocksource_sh;
 
 #endif /* __ASM_SH_TIMER_H */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 8457f83242c..ca22eef669a 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -41,14 +41,6 @@ static int null_rtc_set_time(const time_t secs)
 	return 0;
 }
 
-/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
-{
-	return 0;
-}
-
 void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
 int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 
@@ -200,42 +192,21 @@ device_initcall(timer_init_sysfs);
 
 void (*board_time_init)(void);
 
-/*
- * Shamelessly based on the MIPS and Sparc64 work.
- */
-static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
-unsigned long sh_hpt_frequency = 0;
-
-#define NSEC_PER_CYC_SHIFT	10
-
-static struct clocksource clocksource_sh = {
+struct clocksource clocksource_sh = {
 	.name		= "SuperH",
-	.rating		= 200,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.read		= null_hpt_read,
-	.shift		= 16,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init init_sh_clocksource(void)
-{
-	if (!sh_hpt_frequency || clocksource_sh.read == null_hpt_read)
-		return;
-
-	clocksource_sh.mult = clocksource_hz2mult(sh_hpt_frequency,
-						  clocksource_sh.shift);
-
-	timer_ticks_per_nsec_quotient =
-		clocksource_hz2mult(sh_hpt_frequency, NSEC_PER_CYC_SHIFT);
-
-	clocksource_register(&clocksource_sh);
-}
-
 #ifdef CONFIG_GENERIC_TIME
 unsigned long long sched_clock(void)
 {
-	unsigned long long ticks = clocksource_sh.read();
-	return (ticks * timer_ticks_per_nsec_quotient) >> NSEC_PER_CYC_SHIFT;
+	unsigned long long cycles;
+
+	/* jiffies based sched_clock if no clocksource is installed */
+	if (!clocksource_sh.rating)
+		return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+
+	cycles = clocksource_sh.read();
+	return cyc2ns(&clocksource_sh, cycles);
 }
 #endif
 
@@ -260,16 +231,4 @@ void __init time_init(void)
 	 */
 	sys_timer = get_sys_timer();
 	printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
-
-
-	if (sys_timer->ops->read)
-		clocksource_sh.read = sys_timer->ops->read;
-
-	init_sh_clocksource();
-
-	if (sh_hpt_frequency)
-		printk("Using %lu.%03lu MHz high precision timer.\n",
-		       ((sh_hpt_frequency + 500) / 1000) / 1000,
-		       ((sh_hpt_frequency + 500) / 1000) % 1000);
-
 }
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 0db3f951033..33a24fcf0a1 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -254,7 +254,14 @@ static int tmu_timer_init(void)
 
 	_tmu_start(TMU1);
 
-	sh_hpt_frequency = clk_get_rate(&tmu1_clk);
+	clocksource_sh.rating = 200;
+	clocksource_sh.mask = CLOCKSOURCE_MASK(32);
+	clocksource_sh.read = tmu_timer_read;
+	clocksource_sh.shift = 10;
+	clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk),
+						  clocksource_sh.shift);
+	clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	clocksource_register(&clocksource_sh);
 
 	tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC,
 				      tmu0_clockevent.shift);
@@ -274,7 +281,6 @@ static struct sys_timer_ops tmu_timer_ops = {
 	.init		= tmu_timer_init,
 	.start		= tmu_timer_start,
 	.stop		= tmu_timer_stop,
-	.read		= tmu_timer_read,
 };
 
 struct sys_timer tmu_timer = {
-- 
cgit v1.2.3


From 70f0800133b2a6d694c10908b8673a5327b3bfd6 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 22 Jan 2009 09:55:40 +0000
Subject: sh: tmu disable support

Add TMU disable support so we can use other clockevents.
Also, setup the clockevent rating.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/timers/timer-tmu.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 33a24fcf0a1..2b62f9cff22 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -146,7 +146,14 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy)
 	_tmu_clear_status(TMU0);
 	_tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT);
 
-	evt->event_handler(evt);
+	switch (tmu0_clockevent.mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_PERIODIC:
+		evt->event_handler(evt);
+		break;
+	default:
+		break;
+	}
 
 	return IRQ_HANDLED;
 }
@@ -271,6 +278,7 @@ static int tmu_timer_init(void)
 			clockevent_delta2ns(1, &tmu0_clockevent);
 
 	tmu0_clockevent.cpumask = cpumask_of(0);
+	tmu0_clockevent.rating = 100;
 
 	clockevents_register_device(&tmu0_clockevent);
 
-- 
cgit v1.2.3


From 07821d3310996746a2cf1e9c705ffe64223d1112 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 22 Jan 2009 09:55:49 +0000
Subject: sh: fix no sys_timer case

Handle the case with a sys_timer set to NULL.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/time_32.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index ca22eef669a..766554ba2a5 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -181,7 +181,12 @@ static struct sysdev_class timer_sysclass = {
 
 static int __init timer_init_sysfs(void)
 {
-	int ret = sysdev_class_register(&timer_sysclass);
+	int ret;
+
+	if (!sys_timer)
+		return 0;
+
+	ret = sysdev_class_register(&timer_sysclass);
 	if (ret != 0)
 		return ret;
 
@@ -230,5 +235,8 @@ void __init time_init(void)
 	 * initialized for us.
 	 */
 	sys_timer = get_sys_timer();
+	if (unlikely(!sys_timer))
+		panic("System timer missing.\n");
+
 	printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
 }
-- 
cgit v1.2.3


From 3fb1b6ad0679ad671bd496712b2a088550ee86b2 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 22 Jan 2009 09:55:59 +0000
Subject: sh: CMT clockevent platform driver

SuperH CMT clockevent driver.

Both 16-bit and 32-bit CMT versions are supported, but only 32-bit
is tested. This driver contains support for both clockevents and
clocksources, but no unregistration is supported at this point.

Works fine as clock source and/or event in periodic or oneshot mode.
Tested on sh7722 and sh7723, but should work with any cpu/architecture.

This version is lacking clocksource and early platform driver support
for now - this to minimize the amount of dependencies.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ebabe518e72..5407e1295e5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -397,6 +397,14 @@ source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
+config SH_TIMER_CMT
+	def_bool n
+	prompt "CMT support"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	help
+	  This enables build of the CMT system timer driver.
+
 config SH_TMU
 	def_bool y
 	prompt "TMU timer support"
-- 
cgit v1.2.3


From 424f59d04d7450555ef2bf1eb4a5e2cd2ecf08cd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 22 Jan 2009 09:56:09 +0000
Subject: sh: CMT platform data for sh7723/sh7722/sh7366/sh7343

CMT platform data for SuperH Mobile sh7723/sh7722/sh7343/sh7366.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 34 ++++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 34 ++++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 34 ++++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 34 ++++++++++++++++++++++++++++++++++
 4 files changed, 136 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 4ff4dc64520..c1549382c87 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -12,6 +12,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
 #include <asm/clock.h>
 
 static struct resource iic0_resources[] = {
@@ -140,6 +141,38 @@ static struct platform_device jpu_device = {
 	.num_resources	= ARRAY_SIZE(jpu_resources),
 };
 
+static struct sh_cmt_config cmt_platform_data = {
+	.name = "CMT",
+	.channel_offset = 0x60,
+	.timer_bit = 5,
+	.clk = "cmt0",
+	.clockevent_rating = 125,
+	.clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+	[0] = {
+		.name	= "CMT",
+		.start	= 0x044a0060,
+		.end	= 0x044a006b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -175,6 +208,7 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+	&cmt_device,
 	&iic0_device,
 	&iic1_device,
 	&sci_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 839ae97a7fd..93ecf8ed5c6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -14,6 +14,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
 #include <asm/clock.h>
 
 static struct resource iic_resources[] = {
@@ -147,6 +148,38 @@ static struct platform_device veu1_device = {
 	.num_resources	= ARRAY_SIZE(veu1_resources),
 };
 
+static struct sh_cmt_config cmt_platform_data = {
+	.name = "CMT",
+	.channel_offset = 0x60,
+	.timer_bit = 5,
+	.clk = "cmt0",
+	.clockevent_rating = 125,
+	.clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+	[0] = {
+		.name	= "CMT",
+		.start	= 0x044a0060,
+		.end	= 0x044a006b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -167,6 +200,7 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+	&cmt_device,
 	&iic_device,
 	&sci_device,
 	&usb_host_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 5146afc156e..0e5d204bc79 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -13,6 +13,7 @@
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
 #include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 
@@ -176,6 +177,38 @@ static struct platform_device jpu_device = {
 	.num_resources	= ARRAY_SIZE(jpu_resources),
 };
 
+static struct sh_cmt_config cmt_platform_data = {
+	.name = "CMT",
+	.channel_offset = 0x60,
+	.timer_bit = 5,
+	.clk = "cmt0",
+	.clockevent_rating = 125,
+	.clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+	[0] = {
+		.name	= "CMT",
+		.start	= 0x044a0060,
+		.end	= 0x044a006b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -209,6 +242,7 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7722_devices[] __initdata = {
+	&cmt_device,
 	&rtc_device,
 	&usbf_device,
 	&iic_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 849770d780a..5338dacbcfb 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 
@@ -100,6 +101,38 @@ static struct platform_device veu1_device = {
 	.num_resources	= ARRAY_SIZE(veu1_resources),
 };
 
+static struct sh_cmt_config cmt_platform_data = {
+	.name = "CMT",
+	.channel_offset = 0x60,
+	.timer_bit = 5,
+	.clk = "cmt0",
+	.clockevent_rating = 125,
+	.clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+	[0] = {
+		.name	= "CMT",
+		.start	= 0x044a0060,
+		.end	= 0x044a006b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 104,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt_device = {
+	.name		= "sh_cmt",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &cmt_platform_data,
+	},
+	.resource	= cmt_resources,
+	.num_resources	= ARRAY_SIZE(cmt_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase        = 0xffe00000,
@@ -221,6 +254,7 @@ static struct platform_device iic_device = {
 };
 
 static struct platform_device *sh7723_devices[] __initdata = {
+	&cmt_device,
 	&sci_device,
 	&rtc_device,
 	&iic_device,
-- 
cgit v1.2.3


From f5ad881b425616741bf8696f70b2749abe54a936 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 29 Jan 2009 18:08:58 +0900
Subject: sh: Use SYS_SUPPORTS_CMT for managing CMT timer dependencies.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 43 ++++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5407e1295e5..5784bcec1a1 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -107,6 +107,9 @@ config SYS_SUPPORTS_NUMA
 config SYS_SUPPORTS_PCI
 	bool
 
+config SYS_SUPPORTS_CMT
+	bool
+
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -188,6 +191,7 @@ choice
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
+	select SYS_SUPPORTS_CMT
 
 # SH-2A Processor Support
 
@@ -200,15 +204,18 @@ config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7263
 	bool "Support SH7263 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
@@ -324,6 +331,7 @@ config CPU_SUBTYPE_SH7723
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_CMT
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
@@ -362,6 +370,7 @@ config CPU_SUBTYPE_SHX3
 config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7722
 	bool "Support SH7722 processor"
@@ -369,6 +378,7 @@ config CPU_SUBTYPE_SH7722
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
@@ -376,6 +386,7 @@ config CPU_SUBTYPE_SH7366
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_CMT
 
 # SH-5 Processor Support
 
@@ -397,34 +408,36 @@ source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
-config SH_TIMER_CMT
-	def_bool n
-	prompt "CMT support"
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  This enables build of the CMT system timer driver.
-
 config SH_TMU
-	def_bool y
-	prompt "TMU timer support"
+	bool "TMU timer support"
 	depends on CPU_SH3 || CPU_SH4
+	default y
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
 	  This enables the use of the TMU as the system timer.
 
 config SH_CMT
-	def_bool y
-	prompt "CMT timer support"
-	depends on CPU_SH2 && !CPU_SUBTYPE_MXG
+	bool "CMT timer support"
+	depends on SYS_SUPPORTS_CMT
+	default y
 	help
 	  This enables the use of the CMT as the system timer.
 
+#
+# Support for the new-style CMT driver. This will replace SH_CMT
+# once its other dependencies are merged.
+#
+config SH_TIMER_CMT
+	bool "CMT clockevents driver"
+	depends on SYS_SUPPORTS_CMT && !SH_CMT
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config SH_MTU2
-	def_bool n
-	prompt "MTU2 timer support"
+	bool "MTU2 timer support"
 	depends on CPU_SH2A
+	default y
 	help
 	  This enables the use of the MTU2 as the system timer.
 
-- 
cgit v1.2.3


From d63f3a5857906851b9c1a39e3871a97f4acc1005 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 29 Jan 2009 18:10:13 +0900
Subject: sh: Fix up MTU2 support for SH7203.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                    | 3 ++-
 arch/sh/kernel/timers/timer-mtu2.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5784bcec1a1..c6faad734e5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -447,7 +447,8 @@ config SH_TIMER_IRQ
 			CPU_SUBTYPE_SH7763
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
-	default "142" if CPU_SUBTYPE_SH7203
+	default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
+	default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
 	default "238" if CPU_SUBTYPE_MXG
 	default "16"
 
diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c
index c3d237e1d56..9a77ae86b40 100644
--- a/arch/sh/kernel/timers/timer-mtu2.c
+++ b/arch/sh/kernel/timers/timer-mtu2.c
@@ -35,7 +35,8 @@
 #define MTU2_TSR_1	0xfffe4385
 #define MTU2_TCNT_1	0xfffe4386	/* 16-bit counter */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7203)
 #define MTU2_TGRA_1	0xfffe4388
 #else
 #define MTU2_TGRA_1	0xfffe438a
-- 
cgit v1.2.3


From c161e40f45d32b48f8facbee17720e708607002f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 29 Jan 2009 18:11:25 +0900
Subject: sh: Don't enable GENERIC_TIME for the CMT clockevent driver yet.

GENERIC_TIME still depends on the clocksource bits being there, which is
presently not supported. This allows the CMT clockevent driver to be used
alongside alternate system timers that do not yet provide a clocksource
of their own (MTU2 and so on in the case of SH-2A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig          | 1 -
 arch/sh/kernel/time_32.c | 2 --
 2 files changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c6faad734e5..50c992444e5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -431,7 +431,6 @@ config SH_CMT
 config SH_TIMER_CMT
 	bool "CMT clockevents driver"
 	depends on SYS_SUPPORTS_CMT && !SH_CMT
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config SH_MTU2
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 766554ba2a5..c34e1e0f9b0 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -104,7 +104,6 @@ int do_settimeofday(struct timespec *tv)
 EXPORT_SYMBOL(do_settimeofday);
 #endif /* !CONFIG_GENERIC_TIME */
 
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /* last time the RTC clock got updated */
 static long last_rtc_update;
 
@@ -148,7 +147,6 @@ void handle_timer_tick(void)
 	update_process_times(user_mode(get_irq_regs()));
 #endif
 }
-#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
 
 #ifdef CONFIG_PM
 int timer_suspend(struct sys_device *dev, pm_message_t state)
-- 
cgit v1.2.3


From 7c20dcc545d78946e40e8fab99637fe815b1d211 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 29 Jan 2009 11:29:22 +0100
Subject: x86, summit: consolidate code, fix

Build fix for !NUMA Summit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile    | 2 +-
 arch/x86/kernel/summit_32.c | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 37fa30bada1..a382ca6f6a1 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -73,7 +73,7 @@ obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
-obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
+obj-$(CONFIG_X86_SUMMIT)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_MODULES)		+= module_$(BITS).o
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 3b60dd5e57f..84ff9ebbcc9 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -389,6 +389,7 @@ static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
 	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
 }
 
+#ifdef CONFIG_X86_SUMMIT_NUMA
 static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
@@ -543,7 +544,7 @@ void __init setup_summit(void)
 			next_wpeg = 0;
 	} while (next_wpeg != 0);
 }
-
+#endif
 
 struct genapic apic_summit = {
 
-- 
cgit v1.2.3


From 1dcdd3d15ecea0c22a09d4d001a39d425fceff2c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 17:55:37 +0100
Subject: x86: remove mach_apic.h

Spread mach_apic.h definitions into genapic.h. (with some knock-on effects
on smp.h and apic.h.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h                   |   2 +-
 arch/x86/include/asm/genapic.h                | 139 +++++++++++++++++++++++++
 arch/x86/include/asm/mach-default/mach_apic.h | 144 --------------------------
 arch/x86/include/asm/mach-generic/mach_apic.h |   8 --
 arch/x86/include/asm/smp.h                    |  19 ----
 arch/x86/kernel/acpi/boot.c                   |  14 +--
 arch/x86/kernel/apic.c                        |  22 +++-
 arch/x86/kernel/cpu/addon_cpuid_features.c    |   2 +-
 arch/x86/kernel/cpu/amd.c                     |   2 +-
 arch/x86/kernel/cpu/common.c                  |   2 +-
 arch/x86/kernel/cpu/intel.c                   |   2 +-
 arch/x86/kernel/io_apic.c                     |   2 +-
 arch/x86/kernel/ipi.c                         |   2 +-
 arch/x86/kernel/irq_32.c                      |   2 +-
 arch/x86/kernel/mpparse.c                     |   3 +-
 arch/x86/kernel/setup.c                       |   2 +-
 arch/x86/kernel/smp.c                         |   2 +-
 arch/x86/kernel/smpboot.c                     |   2 +-
 arch/x86/kernel/tlb_uv.c                      |   2 +-
 arch/x86/kernel/visws_quirks.c                |   2 +-
 arch/x86/mach-generic/default.c               |   2 +-
 arch/x86/mach-generic/probe.c                 |   5 -
 22 files changed, 175 insertions(+), 207 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-default/mach_apic.h
 delete mode 100644 arch/x86/include/asm/mach-generic/mach_apic.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 3a3202074c6..6a77068e261 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -215,7 +215,7 @@ static inline void disable_local_APIC(void) { }
 #define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
 
-static inline unsigned default_get_apic_id(unsigned long x) 
+static inline unsigned default_get_apic_id(unsigned long x)
 {
 	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
 
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 1772dad01b1..ce3655a4948 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -120,4 +120,143 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert)
 	return;
 }
 
+extern void generic_bigsmp_probe(void);
+
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline const struct cpumask *default_target_cpus(void)
+{
+#ifdef CONFIG_SMP
+	return cpu_online_mask;
+#else
+	return cpumask_of(0);
+#endif
+}
+
+DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
+
+
+static inline unsigned int read_apic_id(void)
+{
+	unsigned int reg;
+
+	reg = *(u32 *)(APIC_BASE + APIC_ID);
+
+	return apic->get_apic_id(reg);
+}
+
+#ifdef CONFIG_X86_64
+extern void default_setup_apic_routing(void);
+#else
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+extern void default_init_apic_ldr(void);
+
+static inline int default_apic_id_registered(void)
+{
+	return physid_isset(read_apic_id(), phys_cpu_present_map);
+}
+
+static inline unsigned int
+default_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	return cpumask_bits(cpumask)[0];
+}
+
+static inline unsigned int
+default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			       const struct cpumask *andmask)
+{
+	unsigned long mask1 = cpumask_bits(cpumask)[0];
+	unsigned long mask2 = cpumask_bits(andmask)[0];
+	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
+
+	return (unsigned int)(mask1 & mask2 & mask3);
+}
+
+static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static inline void default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+					"Flat", nr_ioapics);
+#endif
+}
+
+extern int default_apicid_to_node(int logical_apicid);
+
+#endif
+
+static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long default_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int default_cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int __default_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline int
+__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+#ifdef CONFIG_X86_32
+static inline int default_cpu_present_to_apicid(int mps_cpu)
+{
+	return __default_cpu_present_to_apicid(mps_cpu);
+}
+
+static inline int
+default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
+#else
+extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
+#endif
+
+static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+#endif /* CONFIG_X86_LOCAL_APIC */
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/mach-default/mach_apic.h b/arch/x86/include/asm/mach-default/mach_apic.h
deleted file mode 100644
index bae053cdcde..00000000000
--- a/arch/x86/include/asm/mach-default/mach_apic.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_APIC_H
-#define _ASM_X86_MACH_DEFAULT_MACH_APIC_H
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
-
-static inline const struct cpumask *default_target_cpus(void)
-{ 
-#ifdef CONFIG_SMP
-	return cpu_online_mask;
-#else
-	return cpumask_of(0);
-#endif
-} 
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define read_apic_id()  (apic->get_apic_id(apic_read(APIC_ID)))
-extern void default_setup_apic_routing(void);
-#else
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void default_init_apic_ldr(void)
-{
-	unsigned long val;
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write(APIC_LDR, val);
-}
-
-static inline int default_apic_id_registered(void)
-{
-	return physid_isset(read_apic_id(), phys_cpu_present_map);
-}
-
-static inline unsigned int
-default_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	return cpumask_bits(cpumask)[0];
-}
-
-static inline unsigned int
-default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			       const struct cpumask *andmask)
-{
-	unsigned long mask1 = cpumask_bits(cpumask)[0];
-	unsigned long mask2 = cpumask_bits(andmask)[0];
-	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
-
-	return (unsigned int)(mask1 & mask2 & mask3);
-}
-
-static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-static inline void default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-					"Flat", nr_ioapics);
-#endif
-}
-
-static inline int default_apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-#endif
-
-static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long default_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	return phys_map;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int default_cpu_to_logical_apicid(int cpu)
-{
-	return 1 << cpu;
-}
-
-static inline int __default_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline int
-__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-#ifdef CONFIG_X86_32
-static inline int default_cpu_present_to_apicid(int mps_cpu)
-{
-	return __default_cpu_present_to_apicid(mps_cpu);
-}
-
-static inline int
-default_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
-}
-#else
-extern int default_cpu_present_to_apicid(int mps_cpu);
-extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
-#endif
-
-static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_APIC_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_apic.h b/arch/x86/include/asm/mach-generic/mach_apic.h
deleted file mode 100644
index 96f217f819e..00000000000
--- a/arch/x86/include/asm/mach-generic/mach_apic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_APIC_H
-#define _ASM_X86_MACH_GENERIC_MACH_APIC_H
-
-#include <asm/genapic.h>
-
-extern void generic_bigsmp_probe(void);
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index d4ac4de4bce..47d0e21f2b9 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -173,8 +173,6 @@ extern int safe_smp_processor_id(void);
 
 #endif
 
-#include <asm/genapic.h>
-
 #ifdef CONFIG_X86_LOCAL_APIC
 
 #ifndef CONFIG_X86_64
@@ -184,26 +182,9 @@ static inline int logical_smp_processor_id(void)
 	return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
 }
 
-static inline unsigned int read_apic_id(void)
-{
-	unsigned int reg;
-
-	reg = *(u32 *)(APIC_BASE + APIC_ID);
-
-	return apic->get_apic_id(reg);
-}
 #endif
 
-
-# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
 extern int hard_smp_processor_id(void);
-# else
-static inline int hard_smp_processor_id(void)
-{
-	/* we don't want to mark this access volatile - bad code generation */
-	return read_apic_id();
-}
-# endif /* APIC_DEFINITION */
 
 #else /* CONFIG_X86_LOCAL_APIC */
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 7b02a1cedca..cb8b52785e3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -42,10 +42,6 @@
 #include <asm/mpspec.h>
 #include <asm/smp.h>
 
-#ifdef CONFIG_X86_LOCAL_APIC
-# include <mach_apic.h>
-#endif
-
 static int __initdata acpi_force = 0;
 u32 acpi_rsdt_forced;
 #ifdef	CONFIG_ACPI
@@ -56,15 +52,7 @@ int acpi_disabled = 1;
 EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
-
-#include <asm/proto.h>
-
-#else				/* X86 */
-
-#ifdef	CONFIG_X86_LOCAL_APIC
-#include <mach_apic.h>
-#endif				/* CONFIG_X86_LOCAL_APIC */
-
+# include <asm/proto.h>
 #endif				/* X86 */
 
 #define BAD_MADT_ENTRY(entry, end) (					    \
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index e6220809ca1..41a0ba34d6b 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -49,7 +49,6 @@
 #include <asm/i8259.h>
 #include <asm/smp.h>
 
-#include <mach_apic.h>
 #include <mach_ipi.h>
 
 /*
@@ -1910,11 +1909,30 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	set_cpu_present(cpu, true);
 }
 
-#ifdef CONFIG_X86_64
 int hard_smp_processor_id(void)
 {
 	return read_apic_id();
 }
+
+void default_init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write(APIC_LDR, val);
+}
+
+#ifdef CONFIG_X86_32
+int default_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
 #endif
 
 /*
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index e8bb892c09f..4a48bb40974 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -7,7 +7,7 @@
 #include <asm/pat.h>
 #include <asm/processor.h>
 
-#include <mach_apic.h>
+#include <asm/genapic.h>
 
 struct cpuid_bit {
 	u16 feature;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 7c878f6aa91..ff4d7b9e32e 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -12,7 +12,7 @@
 # include <asm/cacheflush.h>
 #endif
 
-#include <mach_apic.h>
+#include <asm/genapic.h>
 
 #include "cpu.h"
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 055b9c3a660..c4bdc7f0020 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -26,7 +26,7 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
-#include <mach_apic.h>
+#include <asm/genapic.h>
 #include <asm/genapic.h>
 #include <asm/uv/uv.h>
 #endif
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 5deefae9064..1cef0aa5e5d 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -24,7 +24,7 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
-#include <mach_apic.h>
+#include <asm/genapic.h>
 #endif
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index abae81989c2..e0744ea6d0f 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -63,7 +63,7 @@
 #include <asm/uv/uv_irq.h>
 
 #include <mach_ipi.h>
-#include <mach_apic.h>
+#include <asm/genapic.h>
 
 #define __apicdebuginit(type) static type __init
 
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index e16c41b2e4e..50076d92fbc 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -19,7 +19,7 @@
 #include <asm/proto.h>
 
 #ifdef CONFIG_X86_32
-#include <mach_apic.h>
+#include <asm/genapic.h>
 #include <mach_ipi.h>
 
 /*
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index e0f29be8ab0..d802c844991 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -231,7 +231,7 @@ unsigned int do_IRQ(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-#include <mach_apic.h>
+#include <asm/genapic.h>
 
 /* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
 void fixup_irqs(void)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index a1452a53d14..94fe71029c3 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -29,8 +29,7 @@
 #include <asm/setup.h>
 #include <asm/smp.h>
 
-#include <mach_apic.h>
-
+#include <asm/genapic.h>
 /*
  * Checksum an MP configuration block.
  */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6b27f6dc7bf..92e42939fb0 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -97,7 +97,7 @@
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 
-#include <mach_apic.h>
+#include <asm/genapic.h>
 #include <asm/paravirt.h>
 #include <asm/hypervisor.h>
 
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index c48ba6cc32a..892e7c389be 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -27,7 +27,7 @@
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 #include <mach_ipi.h>
-#include <mach_apic.h>
+#include <asm/genapic.h>
 /*
  *	Some notes on x86 processor bugs affecting SMP operation:
  *
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3fed177f345..489fde9d947 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -65,7 +65,7 @@
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
-#include <mach_apic.h>
+#include <asm/genapic.h>
 #include <smpboot_hooks.h>
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 89fce1b6d01..755ede02b13 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -20,7 +20,7 @@
 #include <asm/tsc.h>
 #include <asm/irq_vectors.h>
 
-#include <mach_apic.h>
+#include <asm/genapic.h>
 
 static struct bau_control	**uv_bau_table_bases __read_mostly;
 static int			uv_bau_retry_limit __read_mostly;
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 2ed5bdf15c9..3bd7f47a91b 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -34,7 +34,7 @@
 
 #include <mach_ipi.h>
 
-#include "mach_apic.h"
+#include <asm/genapic.h>
 
 #include <linux/kernel_stat.h>
 
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 07817b2a787..7d5123e474e 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -12,7 +12,7 @@
 #include <linux/string.h>
 #include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/mach-default/mach_apic.h>
+#include <asm/genapic.h>
 #include <asm/mach-default/mach_ipi.h>
 
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index ab68c6e5c48..c03c7222132 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -154,8 +154,3 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	}
 	return 0;
 }
-
-int hard_smp_processor_id(void)
-{
-	return apic->get_apic_id(*(unsigned long *)(APIC_BASE+APIC_ID));
-}
-- 
cgit v1.2.3


From 83d7aeabe4cf20e59b5d7fd56a75cfd0e0b6b880 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Wed, 28 Jan 2009 17:52:57 -0800
Subject: x86: remove mach_apic.h, fix

Use apic_read() instead of open-coded mmio.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index ce3655a4948..ccfcd19d5b7 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -145,7 +145,7 @@ static inline unsigned int read_apic_id(void)
 {
 	unsigned int reg;
 
-	reg = *(u32 *)(APIC_BASE + APIC_ID);
+	reg = apic_read(APIC_ID);
 
 	return apic->get_apic_id(reg);
 }
-- 
cgit v1.2.3


From 2e096df8edefad78155bb406a5a86c182b17786e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:01:05 +0100
Subject: x86, ES7000: Consolidate code

Move all ES7000 code into arch/x86/kernel/es7000_32.c.

With this it ceases to rely on any build-time subarch features.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c    | 428 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/mach-generic/Makefile |   1 -
 arch/x86/mach-generic/es7000.c | 427 ----------------------------------------
 3 files changed, 428 insertions(+), 428 deletions(-)
 delete mode 100644 arch/x86/mach-generic/es7000.c

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 8faea13c8fa..078364ccfa0 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -372,3 +372,431 @@ void __init es7000_enable_apic_mode(void)
 			mip_status);
 	}
 }
+
+/*
+ * APIC driver for the Unisys ES7000 chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/smp.h>
+#include <asm/ipi.h>
+
+#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
+#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
+
+#define APIC_DFR_VALUE			(APIC_DFR_FLAT)
+
+extern void es7000_enable_apic_mode(void);
+extern int apic_version [MAX_APICS];
+extern u8 cpu_2_logical_apicid[];
+extern unsigned int boot_cpu_physical_apicid;
+
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
+extern void setup_unisys(void);
+
+#define apicid_cluster(apicid)		(apicid & 0xF0)
+#define xapic_phys_to_log_apicid(cpu)	per_cpu(x86_bios_cpu_apicid, cpu)
+
+static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+
+static void es7000_wait_for_init_deassert(atomic_t *deassert)
+{
+#ifndef CONFIG_ES7000_CLUSTERED_APIC
+	while (!atomic_read(deassert))
+		cpu_relax();
+#endif
+	return;
+}
+
+static unsigned int es7000_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+#ifdef CONFIG_ACPI
+static int es7000_check_dsdt(void)
+{
+	struct acpi_table_header header;
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
+		return 1;
+	return 0;
+}
+#endif
+
+static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence(mask, vector);
+}
+
+static void es7000_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+}
+
+static void es7000_send_IPI_all(int vector)
+{
+	es7000_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int es7000_apic_id_registered(void)
+{
+	        return 1;
+}
+
+static const cpumask_t *target_cpus_cluster(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static const cpumask_t *es7000_target_cpus(void)
+{
+	return &cpumask_of_cpu(smp_processor_id());
+}
+
+static unsigned long
+es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+static unsigned long es7000_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static unsigned long calculate_ldr(int cpu)
+{
+	unsigned long id = xapic_phys_to_log_apicid(cpu);
+
+	return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static void es7000_init_apic_ldr_cluster(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static void es7000_init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static void es7000_setup_apic_routing(void)
+{
+	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+		(apic_version[apic] == 0x14) ?
+			"Physical Cluster" : "Logical Cluster",
+			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
+}
+
+static int es7000_apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+
+static int es7000_cpu_present_to_apicid(int mps_cpu)
+{
+	if (!mps_cpu)
+		return boot_cpu_physical_apicid;
+	else if (mps_cpu < nr_cpu_ids)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
+{
+	static int id = 0;
+	physid_mask_t mask;
+
+	mask = physid_mask_of_physid(id);
+	++id;
+
+	return mask;
+}
+
+/* Mapping from cpu number to logical apicid */
+static int es7000_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xff);
+}
+
+static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
+{
+	boot_cpu_physical_apicid = read_apic_id();
+	return (1);
+}
+
+static unsigned int
+es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpumask_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == nr_cpu_ids)
+		return 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = cpumask_first(cpumask);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
+
+	while (cpus_found < num_bits_set) {
+		if (cpumask_test_cpu(cpu, cpumask)) {
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return 0xFF;
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpus_weight(*cpumask);
+	/* Return id to all */
+	if (num_bits_set == nr_cpu_ids)
+		return es7000_cpu_to_logical_apicid(0);
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = first_cpu(*cpumask);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, *cpumask)) {
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
+			if (apicid_cluster(apicid) !=
+					apicid_cluster(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return es7000_cpu_to_logical_apicid(0);
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static unsigned int
+es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
+{
+	int apicid = es7000_cpu_to_logical_apicid(0);
+	cpumask_var_t cpumask;
+
+	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+		return apicid;
+
+	cpumask_and(cpumask, inmask, andmask);
+	cpumask_and(cpumask, cpumask, cpu_online_mask);
+	apicid = es7000_cpu_mask_to_apicid(cpumask);
+
+	free_cpumask_var(cpumask);
+
+	return apicid;
+}
+
+static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+void __init es7000_update_genapic_to_cluster(void)
+{
+	apic->target_cpus = target_cpus_cluster;
+	apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
+	apic->irq_dest_mode = INT_DEST_MODE_CLUSTER;
+
+	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
+
+	apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster;
+}
+
+static int probe_es7000(void)
+{
+	/* probed later in mptable/ACPI hooks */
+	return 0;
+}
+
+static __init int
+es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (mpc->oemptr) {
+		struct mpc_oemtable *oem_table =
+			(struct mpc_oemtable *)mpc->oemptr;
+
+		if (!strncmp(oem, "UNISYS", 6))
+			return parse_unisys_oem((char *)oem_table);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+/* Hook from generic ACPI tables.c */
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	unsigned long oem_addr = 0;
+	int check_dsdt;
+	int ret = 0;
+
+	/* check dsdt at first to avoid clear fix_map for oem_addr */
+	check_dsdt = es7000_check_dsdt();
+
+	if (!find_unisys_acpi_oem_table(&oem_addr)) {
+		if (check_dsdt)
+			ret = parse_unisys_oem((char *)oem_addr);
+		else {
+			setup_unisys();
+			ret = 1;
+		}
+		/*
+		 * we need to unmap it
+		 */
+		unmap_unisys_acpi_oem_table(oem_addr);
+	}
+	return ret;
+}
+#else
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+#endif
+
+
+struct genapic apic_es7000 = {
+
+	.name				= "es7000",
+	.probe				= probe_es7000,
+	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
+	.apic_id_registered		= es7000_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	/* phys delivery to target CPUs: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= es7000_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= 0,
+	.check_apicid_used		= es7000_check_apicid_used,
+	.check_apicid_present		= es7000_check_apicid_present,
+
+	.vector_allocation_domain	= es7000_vector_allocation_domain,
+	.init_apic_ldr			= es7000_init_apic_ldr,
+
+	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
+	.setup_apic_routing		= es7000_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= es7000_apicid_to_node,
+	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
+	.enable_apic_mode		= es7000_enable_apic_mode,
+	.phys_pkg_id			= es7000_phys_pkg_id,
+	.mps_oem_check			= es7000_mps_oem_check,
+
+	.get_apic_id			= es7000_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= es7000_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
+	.send_IPI_all			= es7000_send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+
+	.trampoline_phys_low		= 0x467,
+	.trampoline_phys_high		= 0x469,
+
+	.wait_for_init_deassert		= es7000_wait_for_init_deassert,
+
+	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+};
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 78ab5735cb8..05e47acfd66 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -7,4 +7,3 @@ EXTRA_CFLAGS			:= -Iarch/x86/kernel
 obj-y				:= probe.o default.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
-obj-$(CONFIG_X86_ES7000)	+= es7000.o
diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c
deleted file mode 100644
index bb11166b7c3..00000000000
--- a/arch/x86/mach-generic/es7000.c
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * APIC driver for the Unisys ES7000 chipset.
- */
-#define APIC_DEFINITION 1
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/genapic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/smp.h>
-#include <asm/ipi.h>
-
-#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
-#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
-
-#define APIC_DFR_VALUE			(APIC_DFR_FLAT)
-
-extern void es7000_enable_apic_mode(void);
-extern int apic_version [MAX_APICS];
-extern u8 cpu_2_logical_apicid[];
-extern unsigned int boot_cpu_physical_apicid;
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
-extern void setup_unisys(void);
-
-#define apicid_cluster(apicid)		(apicid & 0xF0)
-#define xapic_phys_to_log_apicid(cpu)	per_cpu(x86_bios_cpu_apicid, cpu)
-
-static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-
-static void es7000_wait_for_init_deassert(atomic_t *deassert)
-{
-#ifndef CONFIG_ES7000_CLUSTERED_APIC
-	while (!atomic_read(deassert))
-		cpu_relax();
-#endif
-	return;
-}
-
-static unsigned int es7000_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-#ifdef CONFIG_ACPI
-static int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-#endif
-
-static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static void es7000_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static void es7000_send_IPI_all(int vector)
-{
-	es7000_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int es7000_apic_id_registered(void)
-{
-	        return 1;
-}
-
-static const cpumask_t *target_cpus_cluster(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static const cpumask_t *es7000_target_cpus(void)
-{
-	return &cpumask_of_cpu(smp_processor_id());
-}
-
-static unsigned long
-es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-static unsigned long es7000_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static unsigned long calculate_ldr(int cpu)
-{
-	unsigned long id = xapic_phys_to_log_apicid(cpu);
-
-	return (SET_APIC_LOGICAL_ID(id));
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static void es7000_init_apic_ldr_cluster(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static void es7000_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static void es7000_setup_apic_routing(void)
-{
-	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
-		(apic_version[apic] == 0x14) ?
-			"Physical Cluster" : "Logical Cluster",
-			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
-}
-
-static int es7000_apicid_to_node(int logical_apicid)
-{
-	return 0;
-}
-
-
-static int es7000_cpu_present_to_apicid(int mps_cpu)
-{
-	if (!mps_cpu)
-		return boot_cpu_physical_apicid;
-	else if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
-{
-	static int id = 0;
-	physid_mask_t mask;
-
-	mask = physid_mask_of_physid(id);
-	++id;
-
-	return mask;
-}
-
-/* Mapping from cpu number to logical apicid */
-static int es7000_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
-}
-
-static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
-{
-	boot_cpu_physical_apicid = read_apic_id();
-	return (1);
-}
-
-static unsigned int
-es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpumask_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = cpumask_first(cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-
-	while (cpus_found < num_bits_set) {
-		if (cpumask_test_cpu(cpu, cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
-
-				return 0xFF;
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return es7000_cpu_to_logical_apicid(0);
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
-
-				return es7000_cpu_to_logical_apicid(0);
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static unsigned int
-es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
-			      const struct cpumask *andmask)
-{
-	int apicid = es7000_cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = es7000_cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-
-	return apicid;
-}
-
-static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-void __init es7000_update_genapic_to_cluster(void)
-{
-	apic->target_cpus = target_cpus_cluster;
-	apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
-	apic->irq_dest_mode = INT_DEST_MODE_CLUSTER;
-
-	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
-
-	apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster;
-}
-
-static int probe_es7000(void)
-{
-	/* probed later in mptable/ACPI hooks */
-	return 0;
-}
-
-static __init int
-es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	if (mpc->oemptr) {
-		struct mpc_oemtable *oem_table =
-			(struct mpc_oemtable *)mpc->oemptr;
-
-		if (!strncmp(oem, "UNISYS", 6))
-			return parse_unisys_oem((char *)oem_table);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_ACPI
-/* Hook from generic ACPI tables.c */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	unsigned long oem_addr = 0;
-	int check_dsdt;
-	int ret = 0;
-
-	/* check dsdt at first to avoid clear fix_map for oem_addr */
-	check_dsdt = es7000_check_dsdt();
-
-	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (check_dsdt)
-			ret = parse_unisys_oem((char *)oem_addr);
-		else {
-			setup_unisys();
-			ret = 1;
-		}
-		/*
-		 * we need to unmap it
-		 */
-		unmap_unisys_acpi_oem_table(oem_addr);
-	}
-	return ret;
-}
-#else
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-#endif
-
-
-struct genapic apic_es7000 = {
-
-	.name				= "es7000",
-	.probe				= probe_es7000,
-	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
-	.apic_id_registered		= es7000_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	/* phys delivery to target CPUs: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= es7000_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= 0,
-	.check_apicid_used		= es7000_check_apicid_used,
-	.check_apicid_present		= es7000_check_apicid_present,
-
-	.vector_allocation_domain	= es7000_vector_allocation_domain,
-	.init_apic_ldr			= es7000_init_apic_ldr,
-
-	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
-	.setup_apic_routing		= es7000_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= es7000_apicid_to_node,
-	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
-	.enable_apic_mode		= es7000_enable_apic_mode,
-	.phys_pkg_id			= es7000_phys_pkg_id,
-	.mps_oem_check			= es7000_mps_oem_check,
-
-	.get_apic_id			= es7000_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= es7000_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
-	.send_IPI_all			= es7000_send_IPI_all,
-	.send_IPI_self			= NULL,
-
-	.wakeup_cpu			= NULL,
-
-	.trampoline_phys_low		= 0x467,
-	.trampoline_phys_high		= 0x469,
-
-	.wait_for_init_deassert		= es7000_wait_for_init_deassert,
-
-	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
-	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-};
-- 
cgit v1.2.3


From 61b90b7ca10cc65d8b850ab542859dc593e5a381 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:01:05 +0100
Subject: x86, NUMAQ: Consolidate code

Move all NUMAQ code into arch/x86/kernel/numaq.c.

With this it ceases to rely on any build-time subarch features.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/numaq_32.c     | 278 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/mach-generic/Makefile |   1 -
 arch/x86/mach-generic/numaq.c  | 277 ----------------------------------------
 3 files changed, 278 insertions(+), 278 deletions(-)
 delete mode 100644 arch/x86/mach-generic/numaq.c

(limited to 'arch')

diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 3928280278f..83bb05524f4 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -291,3 +291,281 @@ int __init get_memcfg_numaq(void)
 	smp_dump_qct();
 	return 1;
 }
+
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <asm/numaq.h>
+#include <asm/io.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+
+#define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline unsigned int numaq_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0x0F;
+}
+
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+
+static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void numaq_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+}
+
+static inline void numaq_send_IPI_all(int vector)
+{
+	numaq_send_IPI_mask(cpu_online_mask, vector);
+}
+
+extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
+
+#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
+ */
+static inline void numaq_smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline void
+numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+	printk("Storing NMI vector\n");
+	*high =
+	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
+	*low =
+	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
+}
+
+static inline const cpumask_t *numaq_target_cpus(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static inline unsigned long
+numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long numaq_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline int numaq_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void numaq_init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void numaq_setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"NUMA-Q", nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int numaq_multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+/* Mapping from cpu number to logical apicid */
+extern u8 cpu_2_logical_apicid[];
+
+static inline int numaq_cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return (int)cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int numaq_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int numaq_apicid_to_node(int logical_apicid) 
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
+{
+	int node = numaq_apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+extern void *xquad_portio;
+
+static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	return 0x0F;
+}
+
+static inline unsigned int
+numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			     const struct cpumask *andmask)
+{
+	return 0x0F;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+static int __numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	numaq_mps_oem_check(mpc, oem, productid);
+	return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+	/* already know from get_memcfg_numaq() */
+	return found_numaq;
+}
+
+static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+static void numaq_setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+       		return;
+
+	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+struct genapic apic_numaq = {
+
+	.name				= "NUMAQ",
+	.probe				= probe_numaq,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= numaq_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* physical delivery on LOCAL quad: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= numaq_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= numaq_check_apicid_used,
+	.check_apicid_present		= numaq_check_apicid_present,
+
+	.vector_allocation_domain	= numaq_vector_allocation_domain,
+	.init_apic_ldr			= numaq_init_apic_ldr,
+
+	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
+	.setup_apic_routing		= numaq_setup_apic_routing,
+	.multi_timer_check		= numaq_multi_timer_check,
+	.apicid_to_node			= numaq_apicid_to_node,
+	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
+	.setup_portio_remap		= numaq_setup_portio_remap,
+	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= numaq_phys_pkg_id,
+	.mps_oem_check			= __numaq_mps_oem_check,
+
+	.get_apic_id			= numaq_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= numaq_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
+	.send_IPI_all			= numaq_send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
+
+	/* We don't do anything here because we use NMI's to boot instead */
+	.wait_for_init_deassert		= NULL,
+
+	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
+	.store_NMI_vector		= numaq_store_NMI_vector,
+	.inquire_remote_apic		= NULL,
+};
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 05e47acfd66..4ede08d309e 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -5,5 +5,4 @@
 EXTRA_CFLAGS			:= -Iarch/x86/kernel
 
 obj-y				:= probe.o default.o
-obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
deleted file mode 100644
index c221cfb2c2d..00000000000
--- a/arch/x86/mach-generic/numaq.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * APIC driver for the IBM NUMAQ chipset.
- */
-#define APIC_DEFINITION 1
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/genapic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/numa.h>
-#include <linux/smp.h>
-#include <asm/numaq.h>
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
-#define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline unsigned int numaq_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0x0F;
-}
-
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void numaq_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void numaq_send_IPI_all(int vector)
-{
-	numaq_send_IPI_mask(cpu_online_mask, vector);
-}
-
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
-#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
-#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
- */
-static inline void numaq_smp_callin_clear_local_apic(void)
-{
-	clear_local_APIC();
-}
-
-static inline void
-numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk("Storing NMI vector\n");
-	*high =
-	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
-	*low =
-	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
-}
-
-static inline const cpumask_t *numaq_target_cpus(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static inline unsigned long
-numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long numaq_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline int numaq_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void numaq_init_apic_ldr(void)
-{
-	/* Already done in NUMA-Q firmware */
-}
-
-static inline void numaq_setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"NUMA-Q", nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int numaq_multi_timer_check(int apic, int irq)
-{
-	return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
-}
-
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-
-static inline int numaq_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int numaq_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < 60)
-		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
-	else
-		return BAD_APICID;
-}
-
-static inline int numaq_apicid_to_node(int logical_apicid) 
-{
-	return logical_apicid >> 4;
-}
-
-static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
-{
-	int node = numaq_apicid_to_node(logical_apicid);
-	int cpu = __ffs(logical_apicid & 0xf);
-
-	return physid_mask_of_physid(cpu + 4*node);
-}
-
-extern void *xquad_portio;
-
-static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return 0x0F;
-}
-
-static inline unsigned int
-numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			     const struct cpumask *andmask)
-{
-	return 0x0F;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-static int __numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	numaq_mps_oem_check(mpc, oem, productid);
-	return found_numaq;
-}
-
-static int probe_numaq(void)
-{
-	/* already know from get_memcfg_numaq() */
-	return found_numaq;
-}
-
-static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-static void numaq_setup_portio_remap(void)
-{
-	int num_quads = num_online_nodes();
-
-	if (num_quads <= 1)
-       		return;
-
-	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
-	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
-		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-struct genapic apic_numaq = {
-
-	.name				= "NUMAQ",
-	.probe				= probe_numaq,
-	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= numaq_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* physical delivery on LOCAL quad: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= numaq_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= numaq_check_apicid_used,
-	.check_apicid_present		= numaq_check_apicid_present,
-
-	.vector_allocation_domain	= numaq_vector_allocation_domain,
-	.init_apic_ldr			= numaq_init_apic_ldr,
-
-	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
-	.setup_apic_routing		= numaq_setup_apic_routing,
-	.multi_timer_check		= numaq_multi_timer_check,
-	.apicid_to_node			= numaq_apicid_to_node,
-	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
-	.setup_portio_remap		= numaq_setup_portio_remap,
-	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= numaq_phys_pkg_id,
-	.mps_oem_check			= __numaq_mps_oem_check,
-
-	.get_apic_id			= numaq_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0x0F << 24,
-
-	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= numaq_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
-	.send_IPI_all			= numaq_send_IPI_all,
-	.send_IPI_self			= NULL,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
-
-	/* We don't do anything here because we use NMI's to boot instead */
-	.wait_for_init_deassert		= NULL,
-
-	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
-	.store_NMI_vector		= numaq_store_NMI_vector,
-	.inquire_remote_apic		= NULL,
-};
-- 
cgit v1.2.3


From b3daa3a1a56cf09fb91773f3658692fd02d08bb1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:04:37 +0100
Subject: x86, bigsmp: consolidate code

Move all code to arch/x86/kernel/bigsmp_32.c.

With this it ceases to rely on any build-time subarch features.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile       |   1 +
 arch/x86/kernel/bigsmp_32.c    | 113 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/mach-generic/Makefile |   1 -
 arch/x86/mach-generic/bigsmp.c | 113 -----------------------------------------
 4 files changed, 114 insertions(+), 114 deletions(-)
 create mode 100644 arch/x86/kernel/bigsmp_32.c
 delete mode 100644 arch/x86/mach-generic/bigsmp.c

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index a382ca6f6a1..4239847906a 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
+obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
 obj-$(CONFIG_X86_SUMMIT)	+= summit_32.o
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
new file mode 100644
index 00000000000..626f45ca4e7
--- /dev/null
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -0,0 +1,113 @@
+/*
+ * APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
+ * Drives the local APIC in "clustered mode".
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <asm/bigsmp/apicdef.h>
+#include <linux/smp.h>
+#include <asm/bigsmp/apic.h>
+#include <asm/bigsmp/ipi.h>
+
+static int dmi_bigsmp; /* can be set by dmi scanners */
+
+static int hp_ht_bigsmp(const struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+	dmi_bigsmp = 1;
+	return 0;
+}
+
+
+static const struct dmi_system_id bigsmp_dmi_table[] = {
+	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
+	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+	DMI_MATCH(DMI_BIOS_VERSION, "P44-"),}
+	},
+
+	{ hp_ht_bigsmp, "HP ProLiant DL740",
+	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+	DMI_MATCH(DMI_BIOS_VERSION, "P47-"),}
+	},
+	 { }
+};
+
+static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	cpus_clear(*retmask);
+	cpu_set(cpu, *retmask);
+}
+
+static int probe_bigsmp(void)
+{
+	if (def_to_bigsmp)
+		dmi_bigsmp = 1;
+	else
+		dmi_check_system(bigsmp_dmi_table);
+	return dmi_bigsmp;
+}
+
+struct genapic apic_bigsmp = {
+
+	.name				= "bigsmp",
+	.probe				= probe_bigsmp,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= bigsmp_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	/* phys delivery to target CPU: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= bigsmp_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= 0,
+	.check_apicid_used		= bigsmp_check_apicid_used,
+	.check_apicid_present		= bigsmp_check_apicid_present,
+
+	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
+	.init_apic_ldr			= bigsmp_init_apic_ldr,
+
+	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
+	.setup_apic_routing		= bigsmp_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= bigsmp_apicid_to_node,
+	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= bigsmp_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= bigsmp_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= default_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
+	.send_IPI_all			= bigsmp_send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+};
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 4ede08d309e..05e4a7ca774 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -5,4 +5,3 @@
 EXTRA_CFLAGS			:= -Iarch/x86/kernel
 
 obj-y				:= probe.o default.o
-obj-$(CONFIG_X86_BIGSMP)	+= bigsmp.o
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
deleted file mode 100644
index 626f45ca4e7..00000000000
--- a/arch/x86/mach-generic/bigsmp.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
- * Drives the local APIC in "clustered mode".
- */
-#define APIC_DEFINITION 1
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/genapic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <asm/bigsmp/apicdef.h>
-#include <linux/smp.h>
-#include <asm/bigsmp/apic.h>
-#include <asm/bigsmp/ipi.h>
-
-static int dmi_bigsmp; /* can be set by dmi scanners */
-
-static int hp_ht_bigsmp(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
-	dmi_bigsmp = 1;
-	return 0;
-}
-
-
-static const struct dmi_system_id bigsmp_dmi_table[] = {
-	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
-	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-	DMI_MATCH(DMI_BIOS_VERSION, "P44-"),}
-	},
-
-	{ hp_ht_bigsmp, "HP ProLiant DL740",
-	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-	DMI_MATCH(DMI_BIOS_VERSION, "P47-"),}
-	},
-	 { }
-};
-
-static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	cpus_clear(*retmask);
-	cpu_set(cpu, *retmask);
-}
-
-static int probe_bigsmp(void)
-{
-	if (def_to_bigsmp)
-		dmi_bigsmp = 1;
-	else
-		dmi_check_system(bigsmp_dmi_table);
-	return dmi_bigsmp;
-}
-
-struct genapic apic_bigsmp = {
-
-	.name				= "bigsmp",
-	.probe				= probe_bigsmp,
-	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= bigsmp_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	/* phys delivery to target CPU: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= bigsmp_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= 0,
-	.check_apicid_used		= bigsmp_check_apicid_used,
-	.check_apicid_present		= bigsmp_check_apicid_present,
-
-	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
-	.init_apic_ldr			= bigsmp_init_apic_ldr,
-
-	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
-	.setup_apic_routing		= bigsmp_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= bigsmp_apicid_to_node,
-	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= bigsmp_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= bigsmp_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= default_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
-	.send_IPI_all			= bigsmp_send_IPI_all,
-	.send_IPI_self			= NULL,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
-	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-};
-- 
cgit v1.2.3


From 9f4187f0a3b93fc215b4472063b6c0b44364e60c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:19:12 +0100
Subject: x86, bigsmp: consolidate header code

Move all the asm/bigsmp/*.h definitions into bigsmp_32.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/bigsmp_32.c | 163 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 159 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 626f45ca4e7..b1f91931003 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -12,10 +12,165 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
-#include <asm/bigsmp/apicdef.h>
 #include <linux/smp.h>
-#include <asm/bigsmp/apic.h>
-#include <asm/bigsmp/ipi.h>
+
+
+static inline unsigned bigsmp_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
+
+static inline int bigsmp_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline const cpumask_t *bigsmp_target_cpus(void)
+{
+#ifdef CONFIG_SMP
+	return &cpu_online_map;
+#else
+	return &cpumask_of_cpu(0);
+#endif
+}
+
+#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
+
+static inline unsigned long
+bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+static inline unsigned long bigsmp_check_apicid_present(int bit)
+{
+	return 1;
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long val, id;
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	id = xapic_phys_to_log_apicid(cpu);
+	val |= SET_APIC_LOGICAL_ID(id);
+	return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void bigsmp_init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static inline void bigsmp_setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"Physflat", nr_ioapics);
+}
+
+static inline int bigsmp_apicid_to_node(int logical_apicid)
+{
+	return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+	return BAD_APICID;
+}
+
+static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int bigsmp_cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xFFL);
+}
+
+static inline void bigsmp_setup_portio_remap(void)
+{
+}
+
+static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
+}
+
+static inline unsigned int
+bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+	if (cpu < nr_cpu_ids)
+		return bigsmp_cpu_to_logical_apicid(cpu);
+
+	return BAD_APICID;
+}
+
+static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+
+static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void bigsmp_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+}
+
+static inline void bigsmp_send_IPI_all(int vector)
+{
+	bigsmp_send_IPI_mask(cpu_online_mask, vector);
+}
 
 static int dmi_bigsmp; /* can be set by dmi scanners */
 
@@ -95,7 +250,7 @@ struct genapic apic_bigsmp = {
 	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= default_send_IPI_mask,
+	.send_IPI_mask			= bigsmp_send_IPI_mask,
 	.send_IPI_mask_allbutself	= NULL,
 	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
 	.send_IPI_all			= bigsmp_send_IPI_all,
-- 
cgit v1.2.3


From d53e2f2855f1c7c2725d550c1ae6b26f4d671c50 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:14:52 +0100
Subject: x86, smp: remove mach_ipi.h

Move mach_ipi.h definitions into genapic.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h                   |  1 +
 arch/x86/include/asm/ipi.h                       | 61 +++++++++++++++++++++++-
 arch/x86/include/asm/mach-default/mach_ipi.h     | 58 ----------------------
 arch/x86/include/asm/mach-generic/gpio.h         | 15 ------
 arch/x86/include/asm/mach-generic/mach_ipi.h     |  6 ---
 arch/x86/include/asm/mach-generic/mach_wakecpu.h |  4 --
 arch/x86/kernel/apic.c                           |  2 +-
 arch/x86/kernel/crash.c                          |  2 +-
 arch/x86/kernel/io_apic.c                        |  1 -
 arch/x86/kernel/ipi.c                            |  1 -
 arch/x86/kernel/kgdb.c                           |  2 +-
 arch/x86/kernel/reboot.c                         |  2 +-
 arch/x86/kernel/smp.c                            |  1 -
 arch/x86/kernel/visws_quirks.c                   |  2 +-
 arch/x86/mach-default/setup.c                    |  2 +-
 arch/x86/mach-generic/default.c                  |  2 +-
 arch/x86/mm/tlb.c                                |  2 +-
 17 files changed, 68 insertions(+), 96 deletions(-)
 delete mode 100644 arch/x86/include/asm/mach-default/mach_ipi.h
 delete mode 100644 arch/x86/include/asm/mach-generic/gpio.h
 delete mode 100644 arch/x86/include/asm/mach-generic/mach_ipi.h
 delete mode 100644 arch/x86/include/asm/mach-generic/mach_wakecpu.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index ccfcd19d5b7..273b99452ae 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -259,4 +259,5 @@ static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
 }
 
 #endif /* CONFIG_X86_LOCAL_APIC */
+
 #endif /* _ASM_X86_GENAPIC_64_H */
diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index a8d717f2c7e..e2e8e4e0a65 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_IPI_H
 #define _ASM_X86_IPI_H
 
+#ifdef CONFIG_X86_LOCAL_APIC
+
 /*
  * Copyright 2004 James Cleverdon, IBM.
  * Subject to the GNU Public License, v.2
@@ -56,8 +58,7 @@ static inline void __xapic_wait_icr_idle(void)
 }
 
 static inline void
-__default_send_IPI_shortcut(unsigned int shortcut,
-			    int vector, unsigned int dest)
+__default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
 {
 	/*
 	 * Subtle. In the case of the 'never do double writes' workaround
@@ -156,4 +157,60 @@ default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 	local_irq_restore(flags);
 }
 
+
+/* Avoid include hell */
+#define NMI_VECTOR 0x02
+
+void default_send_IPI_mask_bitmask(const struct cpumask *mask, int vector);
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+
+extern int no_broadcast;
+
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#else
+static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_bitmask(mask, vector);
+}
+void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
+#endif
+
+static inline void __default_local_send_IPI_allbutself(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR)
+		apic->send_IPI_mask_allbutself(cpu_online_mask, vector);
+	else
+		__default_send_IPI_shortcut(APIC_DEST_ALLBUT, vector, apic->dest_logical);
+}
+
+static inline void __default_local_send_IPI_all(int vector)
+{
+	if (no_broadcast || vector == NMI_VECTOR)
+		apic->send_IPI_mask(cpu_online_mask, vector);
+	else
+		__default_send_IPI_shortcut(APIC_DEST_ALLINC, vector, apic->dest_logical);
+}
+
+#ifdef CONFIG_X86_32
+static inline void default_send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send 
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__default_local_send_IPI_allbutself(vector);
+}
+
+static inline void default_send_IPI_all(int vector)
+{
+	__default_local_send_IPI_all(vector);
+}
+#endif
+
+#endif
+
 #endif /* _ASM_X86_IPI_H */
diff --git a/arch/x86/include/asm/mach-default/mach_ipi.h b/arch/x86/include/asm/mach-default/mach_ipi.h
deleted file mode 100644
index 85dec630c69..00000000000
--- a/arch/x86/include/asm/mach-default/mach_ipi.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_IPI_H
-#define _ASM_X86_MACH_DEFAULT_MACH_IPI_H
-
-/* Avoid include hell */
-#define NMI_VECTOR 0x02
-
-void default_send_IPI_mask_bitmask(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-void __default_send_IPI_shortcut(unsigned int shortcut, int vector);
-
-extern int no_broadcast;
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#else
-static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_bitmask(mask, vector);
-}
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-#endif
-
-static inline void __default_local_send_IPI_allbutself(int vector)
-{
-	if (no_broadcast || vector == NMI_VECTOR)
-		apic->send_IPI_mask_allbutself(cpu_online_mask, vector);
-	else
-		__default_send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
-}
-
-static inline void __default_local_send_IPI_all(int vector)
-{
-	if (no_broadcast || vector == NMI_VECTOR)
-		apic->send_IPI_mask(cpu_online_mask, vector);
-	else
-		__default_send_IPI_shortcut(APIC_DEST_ALLINC, vector);
-}
-
-#ifdef CONFIG_X86_32
-static inline void default_send_IPI_allbutself(int vector)
-{
-	/*
-	 * if there are no other CPUs in the system then we get an APIC send 
-	 * error if we try to broadcast, thus avoid sending IPIs in this case.
-	 */
-	if (!(num_online_cpus() > 1))
-		return;
-
-	__default_local_send_IPI_allbutself(vector);
-}
-
-static inline void default_send_IPI_all(int vector)
-{
-	__default_local_send_IPI_all(vector);
-}
-#endif
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-generic/gpio.h b/arch/x86/include/asm/mach-generic/gpio.h
deleted file mode 100644
index 995c45efdb3..00000000000
--- a/arch/x86/include/asm/mach-generic/gpio.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_GPIO_H
-#define _ASM_X86_MACH_GENERIC_GPIO_H
-
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-
-#include <asm-generic/gpio.h>           /* cansleep wrappers */
-
-#endif /* _ASM_X86_MACH_GENERIC_GPIO_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_ipi.h b/arch/x86/include/asm/mach-generic/mach_ipi.h
deleted file mode 100644
index 5691c09645c..00000000000
--- a/arch/x86/include/asm/mach-generic/mach_ipi.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_IPI_H
-#define _ASM_X86_MACH_GENERIC_MACH_IPI_H
-
-#include <asm/genapic.h>
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_IPI_H */
diff --git a/arch/x86/include/asm/mach-generic/mach_wakecpu.h b/arch/x86/include/asm/mach-generic/mach_wakecpu.h
deleted file mode 100644
index 0b884c03a3f..00000000000
--- a/arch/x86/include/asm/mach-generic/mach_wakecpu.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
-#define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
-
-#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 41a0ba34d6b..81efe86eca8 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -49,7 +49,7 @@
 #include <asm/i8259.h>
 #include <asm/smp.h>
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 
 /*
  * Sanity check
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 11b93cabdf7..ad7f2a696f4 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -28,7 +28,7 @@
 #include <asm/reboot.h>
 #include <asm/virtext.h>
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index e0744ea6d0f..241a01d6fd4 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -62,7 +62,6 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_irq.h>
 
-#include <mach_ipi.h>
 #include <asm/genapic.h>
 
 #define __apicdebuginit(type) static type __init
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 50076d92fbc..0893fa14458 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -20,7 +20,6 @@
 
 #ifdef CONFIG_X86_32
 #include <asm/genapic.h>
-#include <mach_ipi.h>
 
 /*
  * the following functions deal with sending IPIs between CPUs.
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index b62a3811e01..5c4f5548384 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -46,7 +46,7 @@
 #include <asm/apicdef.h>
 #include <asm/system.h>
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 
 /*
  * Put the error code here just in case the user cares:
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 38dace28d62..32e8f0af292 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -24,7 +24,7 @@
 # include <asm/iommu.h>
 #endif
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 
 /*
  * Power off function, if any
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 892e7c389be..0eb32ae9bf1 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -26,7 +26,6 @@
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
-#include <mach_ipi.h>
 #include <asm/genapic.h>
 /*
  *	Some notes on x86 processor bugs affecting SMP operation:
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 3bd7f47a91b..4fd646e6dd4 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -32,7 +32,7 @@
 #include <asm/e820.h>
 #include <asm/io.h>
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 
 #include <asm/genapic.h>
 
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index df167f26562..b65ff0bf730 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,7 +10,7 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 7d5123e474e..d9d44c8c3db 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -13,7 +13,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <asm/genapic.h>
-#include <asm/mach-default/mach_ipi.h>
+#include <asm/ipi.h>
 
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 6348e114692..14c5af4d11e 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -14,7 +14,7 @@
 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
 			= { &init_mm, 0, };
 
-#include <mach_ipi.h>
+#include <asm/genapic.h>
 /*
  *	Smarter SMP flushing macros.
  *		c/o Linus Torvalds.
-- 
cgit v1.2.3


From 7b38725318f4517af6168ccbff99060d67aba1c8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:11:44 +0100
Subject: x86: remove subarchitecture support code

Remove remaining bits of the subarchitecture code. Now that all the
special platforms are runtime probed and runtime handled, we can remove
these facilities.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Makefile              |   5 -
 arch/x86/kernel/Makefile       |   2 +-
 arch/x86/kernel/probe_32.c     | 248 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/mach-generic/Makefile |   7 --
 arch/x86/mach-generic/probe.c  | 156 --------------------------
 5 files changed, 249 insertions(+), 169 deletions(-)
 create mode 100644 arch/x86/kernel/probe_32.c
 delete mode 100644 arch/x86/mach-generic/Makefile
 delete mode 100644 arch/x86/mach-generic/probe.c

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index cacee981d16..799a0d931c8 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -113,11 +113,6 @@ mcore-y  := arch/x86/mach-default/
 mflags-$(CONFIG_X86_VOYAGER)	:= -Iarch/x86/include/asm/mach-voyager
 mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
 
-# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH):= -Iarch/x86/include/asm/mach-generic
-fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
-mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
-
 # default subarch .h files
 mflags-y += -Iarch/x86/include/asm/mach-default
 
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4239847906a..d3f8f49aed6 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -30,7 +30,7 @@ obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o dumpstack.o
 obj-y			+= setup.o i8259.o irqinit_$(BITS).o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
-obj-$(CONFIG_X86_32)	+= probe_roms_32.o
+obj-$(CONFIG_X86_32)	+= probe_32.o probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
new file mode 100644
index 00000000000..a6fba691416
--- /dev/null
+++ b/arch/x86/kernel/probe_32.c
@@ -0,0 +1,248 @@
+/*
+ * Default generic APIC driver. This handles up to 8 CPUs.
+ *
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic x86 APIC driver probe layer.
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/genapic.h>
+#include <asm/setup.h>
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/genapic.h>
+#include <asm/ipi.h>
+
+static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	/*
+	 * Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
+}
+
+/* should be called last. */
+static int probe_default(void)
+{
+	return 1;
+}
+
+struct genapic apic_default = {
+
+	.name				= "default",
+	.probe				= probe_default,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= default_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= default_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= default_check_apicid_used,
+	.check_apicid_present		= default_check_apicid_present,
+
+	.vector_allocation_domain	= default_vector_allocation_domain,
+	.init_apic_ldr			= default_init_apic_ldr,
+
+	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
+	.setup_apic_routing		= default_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= default_apicid_to_node,
+	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= default_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= default_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= default_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= default_send_IPI_allbutself,
+	.send_IPI_all			= default_send_IPI_all,
+	.send_IPI_self			= NULL,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.store_NMI_vector		= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+};
+
+extern struct genapic apic_numaq;
+extern struct genapic apic_summit;
+extern struct genapic apic_bigsmp;
+extern struct genapic apic_es7000;
+extern struct genapic apic_default;
+
+struct genapic *apic = &apic_default;
+
+static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
+	&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
+	&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
+	&apic_es7000,
+#endif
+	&apic_default,	/* must be last */
+	NULL,
+};
+
+static int cmdline_apic __initdata;
+static int __init parse_apic(char *arg)
+{
+	int i;
+
+	if (!arg)
+		return -EINVAL;
+
+	for (i = 0; apic_probe[i]; i++) {
+		if (!strcmp(apic_probe[i]->name, arg)) {
+			apic = apic_probe[i];
+			cmdline_apic = 1;
+			return 0;
+		}
+	}
+
+	if (x86_quirks->update_genapic)
+		x86_quirks->update_genapic();
+
+	/* Parsed again by __setup for debug/verbose */
+	return 0;
+}
+early_param("apic", parse_apic);
+
+void __init generic_bigsmp_probe(void)
+{
+#ifdef CONFIG_X86_BIGSMP
+	/*
+	 * This routine is used to switch to bigsmp mode when
+	 * - There is no apic= option specified by the user
+	 * - generic_apic_probe() has chosen apic_default as the sub_arch
+	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
+	 */
+
+	if (!cmdline_apic && apic == &apic_default) {
+		if (apic_bigsmp.probe()) {
+			apic = &apic_bigsmp;
+			if (x86_quirks->update_genapic)
+				x86_quirks->update_genapic();
+			printk(KERN_INFO "Overriding APIC driver with %s\n",
+			       apic->name);
+		}
+	}
+#endif
+}
+
+void __init generic_apic_probe(void)
+{
+	if (!cmdline_apic) {
+		int i;
+		for (i = 0; apic_probe[i]; i++) {
+			if (apic_probe[i]->probe()) {
+				apic = apic_probe[i];
+				break;
+			}
+		}
+		/* Not visible without early console */
+		if (!apic_probe[i])
+			panic("Didn't find an APIC driver");
+
+		if (x86_quirks->update_genapic)
+			x86_quirks->update_genapic();
+	}
+	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
+}
+
+/* These functions can switch the APIC even after the initial ->probe() */
+
+int __init
+generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (!apic_probe[i]->mps_oem_check)
+			continue;
+		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+			continue;
+
+		if (!cmdline_apic) {
+			apic = apic_probe[i];
+			if (x86_quirks->update_genapic)
+				x86_quirks->update_genapic();
+			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+			       apic->name);
+		}
+		return 1;
+	}
+	return 0;
+}
+
+int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (!apic_probe[i]->acpi_madt_oem_check)
+			continue;
+		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+			continue;
+
+		if (!cmdline_apic) {
+			apic = apic_probe[i];
+			if (x86_quirks->update_genapic)
+				x86_quirks->update_genapic();
+			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+			       apic->name);
+		}
+		return 1;
+	}
+	return 0;
+}
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
deleted file mode 100644
index 05e4a7ca774..00000000000
--- a/arch/x86/mach-generic/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the generic architecture
-#
-
-EXTRA_CFLAGS			:= -Iarch/x86/kernel
-
-obj-y				:= probe.o default.o
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
deleted file mode 100644
index c03c7222132..00000000000
--- a/arch/x86/mach-generic/probe.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright 2003 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License, v.2
- *
- * Generic x86 APIC driver probe layer.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/apicdef.h>
-#include <asm/genapic.h>
-#include <asm/setup.h>
-
-extern struct genapic apic_numaq;
-extern struct genapic apic_summit;
-extern struct genapic apic_bigsmp;
-extern struct genapic apic_es7000;
-extern struct genapic apic_default;
-
-struct genapic *apic = &apic_default;
-
-static struct genapic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_NUMAQ
-	&apic_numaq,
-#endif
-#ifdef CONFIG_X86_SUMMIT
-	&apic_summit,
-#endif
-#ifdef CONFIG_X86_BIGSMP
-	&apic_bigsmp,
-#endif
-#ifdef CONFIG_X86_ES7000
-	&apic_es7000,
-#endif
-	&apic_default,	/* must be last */
-	NULL,
-};
-
-static int cmdline_apic __initdata;
-static int __init parse_apic(char *arg)
-{
-	int i;
-
-	if (!arg)
-		return -EINVAL;
-
-	for (i = 0; apic_probe[i]; i++) {
-		if (!strcmp(apic_probe[i]->name, arg)) {
-			apic = apic_probe[i];
-			cmdline_apic = 1;
-			return 0;
-		}
-	}
-
-	if (x86_quirks->update_genapic)
-		x86_quirks->update_genapic();
-
-	/* Parsed again by __setup for debug/verbose */
-	return 0;
-}
-early_param("apic", parse_apic);
-
-void __init generic_bigsmp_probe(void)
-{
-#ifdef CONFIG_X86_BIGSMP
-	/*
-	 * This routine is used to switch to bigsmp mode when
-	 * - There is no apic= option specified by the user
-	 * - generic_apic_probe() has chosen apic_default as the sub_arch
-	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
-	 */
-
-	if (!cmdline_apic && apic == &apic_default) {
-		if (apic_bigsmp.probe()) {
-			apic = &apic_bigsmp;
-			if (x86_quirks->update_genapic)
-				x86_quirks->update_genapic();
-			printk(KERN_INFO "Overriding APIC driver with %s\n",
-			       apic->name);
-		}
-	}
-#endif
-}
-
-void __init generic_apic_probe(void)
-{
-	if (!cmdline_apic) {
-		int i;
-		for (i = 0; apic_probe[i]; i++) {
-			if (apic_probe[i]->probe()) {
-				apic = apic_probe[i];
-				break;
-			}
-		}
-		/* Not visible without early console */
-		if (!apic_probe[i])
-			panic("Didn't find an APIC driver");
-
-		if (x86_quirks->update_genapic)
-			x86_quirks->update_genapic();
-	}
-	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
-}
-
-/* These functions can switch the APIC even after the initial ->probe() */
-
-int __init
-generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	int i;
-
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->mps_oem_check)
-			continue;
-		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
-			continue;
-
-		if (!cmdline_apic) {
-			apic = apic_probe[i];
-			if (x86_quirks->update_genapic)
-				x86_quirks->update_genapic();
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-			       apic->name);
-		}
-		return 1;
-	}
-	return 0;
-}
-
-int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	int i;
-
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->acpi_madt_oem_check)
-			continue;
-		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
-			continue;
-
-		if (!cmdline_apic) {
-			apic = apic_probe[i];
-			if (x86_quirks->update_genapic)
-				x86_quirks->update_genapic();
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-			       apic->name);
-		}
-		return 1;
-	}
-	return 0;
-}
-- 
cgit v1.2.3


From 1164dd0099c0d79146a55319670f57ab7ad1d352 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:34:09 +0100
Subject: x86: move mach-default/*.h files to asm/

We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apm.h                        | 73 +++++++++++++++++++++++
 arch/x86/include/asm/do_timer.h                   | 16 +++++
 arch/x86/include/asm/entry_arch.h                 | 57 ++++++++++++++++++
 arch/x86/include/asm/mach-default/apm.h           | 73 -----------------------
 arch/x86/include/asm/mach-default/do_timer.h      | 16 -----
 arch/x86/include/asm/mach-default/entry_arch.h    | 52 ----------------
 arch/x86/include/asm/mach-default/mach_timer.h    | 48 ---------------
 arch/x86/include/asm/mach-default/mach_traps.h    | 33 ----------
 arch/x86/include/asm/mach-default/pci-functions.h | 19 ------
 arch/x86/include/asm/mach-default/setup_arch.h    |  3 -
 arch/x86/include/asm/mach-default/smpboot_hooks.h | 61 -------------------
 arch/x86/include/asm/mach_timer.h                 | 48 +++++++++++++++
 arch/x86/include/asm/mach_traps.h                 | 33 ++++++++++
 arch/x86/include/asm/pci-functions.h              | 19 ++++++
 arch/x86/include/asm/setup_arch.h                 |  3 +
 arch/x86/include/asm/smpboot_hooks.h              | 61 +++++++++++++++++++
 arch/x86/kernel/apm_32.c                          |  2 +-
 arch/x86/kernel/entry_32.S                        |  2 +-
 arch/x86/kernel/nmi.c                             |  2 +-
 arch/x86/kernel/probe_roms_32.c                   |  2 +-
 arch/x86/kernel/setup.c                           |  2 +-
 arch/x86/kernel/smpboot.c                         |  2 +-
 arch/x86/kernel/time_32.c                         |  2 +-
 arch/x86/kernel/traps.c                           |  2 +-
 arch/x86/pci/pcbios.c                             |  2 +-
 25 files changed, 319 insertions(+), 314 deletions(-)
 create mode 100644 arch/x86/include/asm/apm.h
 create mode 100644 arch/x86/include/asm/do_timer.h
 create mode 100644 arch/x86/include/asm/entry_arch.h
 delete mode 100644 arch/x86/include/asm/mach-default/apm.h
 delete mode 100644 arch/x86/include/asm/mach-default/do_timer.h
 delete mode 100644 arch/x86/include/asm/mach-default/entry_arch.h
 delete mode 100644 arch/x86/include/asm/mach-default/mach_timer.h
 delete mode 100644 arch/x86/include/asm/mach-default/mach_traps.h
 delete mode 100644 arch/x86/include/asm/mach-default/pci-functions.h
 delete mode 100644 arch/x86/include/asm/mach-default/setup_arch.h
 delete mode 100644 arch/x86/include/asm/mach-default/smpboot_hooks.h
 create mode 100644 arch/x86/include/asm/mach_timer.h
 create mode 100644 arch/x86/include/asm/mach_traps.h
 create mode 100644 arch/x86/include/asm/pci-functions.h
 create mode 100644 arch/x86/include/asm/setup_arch.h
 create mode 100644 arch/x86/include/asm/smpboot_hooks.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/apm.h b/arch/x86/include/asm/apm.h
new file mode 100644
index 00000000000..20370c6db74
--- /dev/null
+++ b/arch/x86/include/asm/apm.h
@@ -0,0 +1,73 @@
+/*
+ *  Machine specific APM BIOS functions for generic.
+ *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_X86_MACH_DEFAULT_APM_H
+#define _ASM_X86_MACH_DEFAULT_APM_H
+
+#ifdef APM_ZERO_SEGS
+#	define APM_DO_ZERO_SEGS \
+		"pushl %%ds\n\t" \
+		"pushl %%es\n\t" \
+		"xorl %%edx, %%edx\n\t" \
+		"mov %%dx, %%ds\n\t" \
+		"mov %%dx, %%es\n\t" \
+		"mov %%dx, %%fs\n\t" \
+		"mov %%dx, %%gs\n\t"
+#	define APM_DO_POP_SEGS \
+		"popl %%es\n\t" \
+		"popl %%ds\n\t"
+#else
+#	define APM_DO_ZERO_SEGS
+#	define APM_DO_POP_SEGS
+#endif
+
+static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
+					u32 *eax, u32 *ebx, u32 *ecx,
+					u32 *edx, u32 *esi)
+{
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%al\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
+		  "=S" (*esi)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+}
+
+static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
+						u32 ecx_in, u32 *eax)
+{
+	int	cx, dx, si;
+	u8	error;
+
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%bl\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
+		  "=S" (si)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+	return error;
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_APM_H */
diff --git a/arch/x86/include/asm/do_timer.h b/arch/x86/include/asm/do_timer.h
new file mode 100644
index 00000000000..23ecda0b28a
--- /dev/null
+++ b/arch/x86/include/asm/do_timer.h
@@ -0,0 +1,16 @@
+/* defines for inline arch setup functions */
+#include <linux/clockchips.h>
+
+#include <asm/i8259.h>
+#include <asm/i8253.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ *
+ * Call the pit clock event handler. see asm/i8253.h
+ **/
+
+static inline void do_timer_interrupt_hook(void)
+{
+	global_clock_event->event_handler(global_clock_event);
+}
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
new file mode 100644
index 00000000000..b87b077cc23
--- /dev/null
+++ b/arch/x86/include/asm/entry_arch.h
@@ -0,0 +1,57 @@
+/*
+ * This file is designed to contain the BUILD_INTERRUPT specifications for
+ * all of the extra named interrupt vectors used by the architecture.
+ * Usually this is the Inter Process Interrupts (IPIs)
+ */
+
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
+BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
+
+BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt1,INVALIDATE_TLB_VECTOR_START+1,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt2,INVALIDATE_TLB_VECTOR_START+2,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt3,INVALIDATE_TLB_VECTOR_START+3,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt4,INVALIDATE_TLB_VECTOR_START+4,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt5,INVALIDATE_TLB_VECTOR_START+5,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt6,INVALIDATE_TLB_VECTOR_START+6,
+		 smp_invalidate_interrupt)
+BUILD_INTERRUPT3(invalidate_interrupt7,INVALIDATE_TLB_VECTOR_START+7,
+		 smp_invalidate_interrupt)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+
+#ifdef CONFIG_PERF_COUNTERS
+BUILD_INTERRUPT(perf_counter_interrupt, LOCAL_PERF_VECTOR)
+#endif
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
+#endif
+
+#endif
diff --git a/arch/x86/include/asm/mach-default/apm.h b/arch/x86/include/asm/mach-default/apm.h
deleted file mode 100644
index 20370c6db74..00000000000
--- a/arch/x86/include/asm/mach-default/apm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  Machine specific APM BIOS functions for generic.
- *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-
-#ifndef _ASM_X86_MACH_DEFAULT_APM_H
-#define _ASM_X86_MACH_DEFAULT_APM_H
-
-#ifdef APM_ZERO_SEGS
-#	define APM_DO_ZERO_SEGS \
-		"pushl %%ds\n\t" \
-		"pushl %%es\n\t" \
-		"xorl %%edx, %%edx\n\t" \
-		"mov %%dx, %%ds\n\t" \
-		"mov %%dx, %%es\n\t" \
-		"mov %%dx, %%fs\n\t" \
-		"mov %%dx, %%gs\n\t"
-#	define APM_DO_POP_SEGS \
-		"popl %%es\n\t" \
-		"popl %%ds\n\t"
-#else
-#	define APM_DO_ZERO_SEGS
-#	define APM_DO_POP_SEGS
-#endif
-
-static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
-					u32 *eax, u32 *ebx, u32 *ecx,
-					u32 *edx, u32 *esi)
-{
-	/*
-	 * N.B. We do NOT need a cld after the BIOS call
-	 * because we always save and restore the flags.
-	 */
-	__asm__ __volatile__(APM_DO_ZERO_SEGS
-		"pushl %%edi\n\t"
-		"pushl %%ebp\n\t"
-		"lcall *%%cs:apm_bios_entry\n\t"
-		"setc %%al\n\t"
-		"popl %%ebp\n\t"
-		"popl %%edi\n\t"
-		APM_DO_POP_SEGS
-		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
-		  "=S" (*esi)
-		: "a" (func), "b" (ebx_in), "c" (ecx_in)
-		: "memory", "cc");
-}
-
-static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
-						u32 ecx_in, u32 *eax)
-{
-	int	cx, dx, si;
-	u8	error;
-
-	/*
-	 * N.B. We do NOT need a cld after the BIOS call
-	 * because we always save and restore the flags.
-	 */
-	__asm__ __volatile__(APM_DO_ZERO_SEGS
-		"pushl %%edi\n\t"
-		"pushl %%ebp\n\t"
-		"lcall *%%cs:apm_bios_entry\n\t"
-		"setc %%bl\n\t"
-		"popl %%ebp\n\t"
-		"popl %%edi\n\t"
-		APM_DO_POP_SEGS
-		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
-		  "=S" (si)
-		: "a" (func), "b" (ebx_in), "c" (ecx_in)
-		: "memory", "cc");
-	return error;
-}
-
-#endif /* _ASM_X86_MACH_DEFAULT_APM_H */
diff --git a/arch/x86/include/asm/mach-default/do_timer.h b/arch/x86/include/asm/mach-default/do_timer.h
deleted file mode 100644
index 23ecda0b28a..00000000000
--- a/arch/x86/include/asm/mach-default/do_timer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/i8259.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-
-static inline void do_timer_interrupt_hook(void)
-{
-	global_clock_event->event_handler(global_clock_event);
-}
diff --git a/arch/x86/include/asm/mach-default/entry_arch.h b/arch/x86/include/asm/mach-default/entry_arch.h
deleted file mode 100644
index 6fa399ad1de..00000000000
--- a/arch/x86/include/asm/mach-default/entry_arch.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is designed to contain the BUILD_INTERRUPT specifications for
- * all of the extra named interrupt vectors used by the architecture.
- * Usually this is the Inter Process Interrupts (IPIs)
- */
-
-/*
- * The following vectors are part of the Linux architecture, there
- * is no hardware IRQ pin equivalent for them, they are triggered
- * through the ICC by us (IPIs)
- */
-#ifdef CONFIG_X86_SMP
-BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
-BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
-BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
-BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
-
-BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt1,INVALIDATE_TLB_VECTOR_START+1,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt2,INVALIDATE_TLB_VECTOR_START+2,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt3,INVALIDATE_TLB_VECTOR_START+3,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt4,INVALIDATE_TLB_VECTOR_START+4,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt5,INVALIDATE_TLB_VECTOR_START+5,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt6,INVALIDATE_TLB_VECTOR_START+6,
-		 smp_invalidate_interrupt)
-BUILD_INTERRUPT3(invalidate_interrupt7,INVALIDATE_TLB_VECTOR_START+7,
-		 smp_invalidate_interrupt)
-#endif
-
-/*
- * every pentium local APIC has two 'local interrupts', with a
- * soft-definable vector attached to both interrupts, one of
- * which is a timer interrupt, the other one is error counter
- * overflow. Linux uses the local APIC timer interrupt to get
- * a much simpler SMP time architecture:
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
-BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
-BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
-#endif
-
-#endif
diff --git a/arch/x86/include/asm/mach-default/mach_timer.h b/arch/x86/include/asm/mach-default/mach_timer.h
deleted file mode 100644
index 853728519ae..00000000000
--- a/arch/x86/include/asm/mach-default/mach_timer.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Machine specific calibrate_tsc() for generic.
- *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-/* ------ Calibrate the TSC ------- 
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
-#define _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
-
-#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
-#define CALIBRATE_LATCH	\
-	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
-
-static inline void mach_prepare_counter(void)
-{
-       /* Set the Gate high, disable speaker */
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	/*
-	 * Now let's take care of CTC channel 2
-	 *
-	 * Set the Gate high, program CTC channel 2 for mode 0,
-	 * (interrupt on terminal count mode), binary count,
-	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
-	 *
-	 * Some devices need a delay here.
-	 */
-	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
-	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
-	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
-}
-
-static inline void mach_countup(unsigned long *count_p)
-{
-	unsigned long count = 0;
-	do {
-		count++;
-	} while ((inb_p(0x61) & 0x20) == 0);
-	*count_p = count;
-}
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_TIMER_H */
diff --git a/arch/x86/include/asm/mach-default/mach_traps.h b/arch/x86/include/asm/mach-default/mach_traps.h
deleted file mode 100644
index f7920601e47..00000000000
--- a/arch/x86/include/asm/mach-default/mach_traps.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  Machine specific NMI handling for generic.
- *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
-#define _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
-
-#include <asm/mc146818rtc.h>
-
-static inline unsigned char get_nmi_reason(void)
-{
-	return inb(0x61);
-}
-
-static inline void reassert_nmi(void)
-{
-	int old_reg = -1;
-
-	if (do_i_have_lock_cmos())
-		old_reg = current_lock_cmos_reg();
-	else
-		lock_cmos(0); /* register doesn't matter here */
-	outb(0x8f, 0x70);
-	inb(0x71);		/* dummy */
-	outb(0x0f, 0x70);
-	inb(0x71);		/* dummy */
-	if (old_reg >= 0)
-		outb(old_reg, 0x70);
-	else
-		unlock_cmos();
-}
-
-#endif /* _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H */
diff --git a/arch/x86/include/asm/mach-default/pci-functions.h b/arch/x86/include/asm/mach-default/pci-functions.h
deleted file mode 100644
index ed0bab42735..00000000000
--- a/arch/x86/include/asm/mach-default/pci-functions.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *	PCI BIOS function numbering for conventional PCI BIOS 
- *	systems
- */
-
-#define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
-#define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
-#define PCIBIOS_FIND_PCI_DEVICE		0xb102
-#define PCIBIOS_FIND_PCI_CLASS_CODE	0xb103
-#define PCIBIOS_GENERATE_SPECIAL_CYCLE	0xb106
-#define PCIBIOS_READ_CONFIG_BYTE	0xb108
-#define PCIBIOS_READ_CONFIG_WORD	0xb109
-#define PCIBIOS_READ_CONFIG_DWORD	0xb10a
-#define PCIBIOS_WRITE_CONFIG_BYTE	0xb10b
-#define PCIBIOS_WRITE_CONFIG_WORD	0xb10c
-#define PCIBIOS_WRITE_CONFIG_DWORD	0xb10d
-#define PCIBIOS_GET_ROUTING_OPTIONS	0xb10e
-#define PCIBIOS_SET_PCI_HW_INT		0xb10f
-
diff --git a/arch/x86/include/asm/mach-default/setup_arch.h b/arch/x86/include/asm/mach-default/setup_arch.h
deleted file mode 100644
index 38846208b54..00000000000
--- a/arch/x86/include/asm/mach-default/setup_arch.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* Hook to call BIOS initialisation function */
-
-/* no action for generic */
diff --git a/arch/x86/include/asm/mach-default/smpboot_hooks.h b/arch/x86/include/asm/mach-default/smpboot_hooks.h
deleted file mode 100644
index 1def6011490..00000000000
--- a/arch/x86/include/asm/mach-default/smpboot_hooks.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
- * which needs to alter them. */
-
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	io_apic_irqs = 0;
-#endif
-}
-
-static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
-{
-	CMOS_WRITE(0xa, 0xf);
-	local_flush_tlb();
-	pr_debug("1.\n");
-	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_high)) =
-								 start_eip >> 4;
-	pr_debug("2.\n");
-	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_low)) =
-							 start_eip & 0xf;
-	pr_debug("3.\n");
-}
-
-static inline void smpboot_restore_warm_reset_vector(void)
-{
-	/*
-	 * Install writable page 0 entry to set BIOS data area.
-	 */
-	local_flush_tlb();
-
-	/*
-	 * Paranoid:  Set warm reset code and vector here back
-	 * to default values.
-	 */
-	CMOS_WRITE(0, 0xf);
-
-	*((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
-}
-
-static inline void __init smpboot_setup_io_apic(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Here we can be sure that there is an IO-APIC in the system. Let's
-	 * go and set it up:
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else {
-		nr_ioapics = 0;
-		localise_nmi_watchdog();
-	}
-#endif
-}
-
-static inline void smpboot_clear_io_apic(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	nr_ioapics = 0;
-#endif
-}
diff --git a/arch/x86/include/asm/mach_timer.h b/arch/x86/include/asm/mach_timer.h
new file mode 100644
index 00000000000..853728519ae
--- /dev/null
+++ b/arch/x86/include/asm/mach_timer.h
@@ -0,0 +1,48 @@
+/*
+ *  Machine specific calibrate_tsc() for generic.
+ *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC ------- 
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
+#define _ASM_X86_MACH_DEFAULT_MACH_TIMER_H
+
+#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
+#define CALIBRATE_LATCH	\
+	((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000)
+
+static inline void mach_prepare_counter(void)
+{
+       /* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
+	 */
+	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
+}
+
+static inline void mach_countup(unsigned long *count_p)
+{
+	unsigned long count = 0;
+	do {
+		count++;
+	} while ((inb_p(0x61) & 0x20) == 0);
+	*count_p = count;
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_TIMER_H */
diff --git a/arch/x86/include/asm/mach_traps.h b/arch/x86/include/asm/mach_traps.h
new file mode 100644
index 00000000000..f7920601e47
--- /dev/null
+++ b/arch/x86/include/asm/mach_traps.h
@@ -0,0 +1,33 @@
+/*
+ *  Machine specific NMI handling for generic.
+ *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
+#define _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H
+
+#include <asm/mc146818rtc.h>
+
+static inline unsigned char get_nmi_reason(void)
+{
+	return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+	int old_reg = -1;
+
+	if (do_i_have_lock_cmos())
+		old_reg = current_lock_cmos_reg();
+	else
+		lock_cmos(0); /* register doesn't matter here */
+	outb(0x8f, 0x70);
+	inb(0x71);		/* dummy */
+	outb(0x0f, 0x70);
+	inb(0x71);		/* dummy */
+	if (old_reg >= 0)
+		outb(old_reg, 0x70);
+	else
+		unlock_cmos();
+}
+
+#endif /* _ASM_X86_MACH_DEFAULT_MACH_TRAPS_H */
diff --git a/arch/x86/include/asm/pci-functions.h b/arch/x86/include/asm/pci-functions.h
new file mode 100644
index 00000000000..ed0bab42735
--- /dev/null
+++ b/arch/x86/include/asm/pci-functions.h
@@ -0,0 +1,19 @@
+/*
+ *	PCI BIOS function numbering for conventional PCI BIOS 
+ *	systems
+ */
+
+#define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
+#define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
+#define PCIBIOS_FIND_PCI_DEVICE		0xb102
+#define PCIBIOS_FIND_PCI_CLASS_CODE	0xb103
+#define PCIBIOS_GENERATE_SPECIAL_CYCLE	0xb106
+#define PCIBIOS_READ_CONFIG_BYTE	0xb108
+#define PCIBIOS_READ_CONFIG_WORD	0xb109
+#define PCIBIOS_READ_CONFIG_DWORD	0xb10a
+#define PCIBIOS_WRITE_CONFIG_BYTE	0xb10b
+#define PCIBIOS_WRITE_CONFIG_WORD	0xb10c
+#define PCIBIOS_WRITE_CONFIG_DWORD	0xb10d
+#define PCIBIOS_GET_ROUTING_OPTIONS	0xb10e
+#define PCIBIOS_SET_PCI_HW_INT		0xb10f
+
diff --git a/arch/x86/include/asm/setup_arch.h b/arch/x86/include/asm/setup_arch.h
new file mode 100644
index 00000000000..38846208b54
--- /dev/null
+++ b/arch/x86/include/asm/setup_arch.h
@@ -0,0 +1,3 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for generic */
diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h
new file mode 100644
index 00000000000..1def6011490
--- /dev/null
+++ b/arch/x86/include/asm/smpboot_hooks.h
@@ -0,0 +1,61 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	io_apic_irqs = 0;
+#endif
+}
+
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+	CMOS_WRITE(0xa, 0xf);
+	local_flush_tlb();
+	pr_debug("1.\n");
+	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_high)) =
+								 start_eip >> 4;
+	pr_debug("2.\n");
+	*((volatile unsigned short *)phys_to_virt(apic->trampoline_phys_low)) =
+							 start_eip & 0xf;
+	pr_debug("3.\n");
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+	/*
+	 * Install writable page 0 entry to set BIOS data area.
+	 */
+	local_flush_tlb();
+
+	/*
+	 * Paranoid:  Set warm reset code and vector here back
+	 * to default values.
+	 */
+	CMOS_WRITE(0, 0xf);
+
+	*((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
+}
+
+static inline void __init smpboot_setup_io_apic(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Here we can be sure that there is an IO-APIC in the system. Let's
+	 * go and set it up:
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+	else {
+		nr_ioapics = 0;
+		localise_nmi_watchdog();
+	}
+#endif
+}
+
+static inline void smpboot_clear_io_apic(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	nr_ioapics = 0;
+#endif
+}
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 98807bb095a..37ba5f85b71 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -301,7 +301,7 @@ extern int (*console_blank_hook)(int);
  */
 #define APM_ZERO_SEGS
 
-#include "apm.h"
+#include <asm/apm.h>
 
 /*
  * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend.
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index a0b91aac72a..65efd42454b 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -688,7 +688,7 @@ ENDPROC(name)
 #define BUILD_INTERRUPT(name, nr)	BUILD_INTERRUPT3(name, nr, smp_##name)
 
 /* The include is where all of the SMP etc. interrupts come from */
-#include "entry_arch.h"
+#include <asm/entry_arch.h>
 
 ENTRY(coprocessor_error)
 	RING0_INT_FRAME
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 23b6d9e6e4f..bdfad80c3cf 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -34,7 +34,7 @@
 
 #include <asm/mce.h>
 
-#include <mach_traps.h>
+#include <asm/mach_traps.h>
 
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms_32.c
index 675a48c404a..071e7fea42e 100644
--- a/arch/x86/kernel/probe_roms_32.c
+++ b/arch/x86/kernel/probe_roms_32.c
@@ -18,7 +18,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/io.h>
-#include <setup_arch.h>
+#include <asm/setup_arch.h>
 
 static struct resource system_rom_resource = {
 	.name	= "System ROM",
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 92e42939fb0..e645d4793e4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -81,7 +81,7 @@
 #include <asm/io_apic.h>
 #include <asm/ist.h>
 #include <asm/vmi.h>
-#include <setup_arch.h>
+#include <asm/setup_arch.h>
 #include <asm/bios_ebda.h>
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 489fde9d947..e90b3e50b54 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -66,7 +66,7 @@
 #include <linux/mc146818rtc.h>
 
 #include <asm/genapic.h>
-#include <smpboot_hooks.h>
+#include <asm/smpboot_hooks.h>
 
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 3985cac0ed4..764c74e871f 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -38,7 +38,7 @@
 #include <asm/time.h>
 #include <asm/timer.h>
 
-#include "do_timer.h"
+#include <asm/do_timer.h>
 
 int timer_ack;
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index ed5aee5f3fc..214bc327a0c 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -54,7 +54,7 @@
 #include <asm/desc.h>
 #include <asm/i387.h>
 
-#include <mach_traps.h>
+#include <asm/mach_traps.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/pgalloc.h>
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index b82cae970df..1c975cc9839 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -7,7 +7,7 @@
 #include <linux/module.h>
 #include <linux/uaccess.h>
 #include <asm/pci_x86.h>
-#include <asm/mach-default/pci-functions.h>
+#include <asm/pci-functions.h>
 
 /* BIOS32 signature: "_32_" */
 #define BIOS32_SIGNATURE	(('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
-- 
cgit v1.2.3


From 6bda2c8b32febeb38ee128047253751e080bad52 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:32:55 +0100
Subject: x86: remove subarchitecture support

Remove the 32-bit subarchitecture support code.

All subarchitectures but Voyager have been converted. Voyager will be
done later or will be removed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Makefile               |  21 ------
 arch/x86/include/asm/apic.h     |   2 +
 arch/x86/kernel/Makefile        |   2 +-
 arch/x86/kernel/io_apic.c       |  17 -----
 arch/x86/kernel/probe_32.c      | 163 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/mach-default/setup.c   | 162 ---------------------------------------
 arch/x86/mach-generic/default.c |  93 -----------------------
 7 files changed, 166 insertions(+), 294 deletions(-)
 delete mode 100644 arch/x86/mach-default/setup.c
 delete mode 100644 arch/x86/mach-generic/default.c

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 799a0d931c8..99550c40799 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -102,24 +102,6 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
 # prevent gcc from generating any FP code by mistake
 KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 
-###
-# Sub architecture support
-# fcore-y is linked before mcore-y files.
-
-# Default subarch .c files
-mcore-y  := arch/x86/mach-default/
-
-# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER)	:= -Iarch/x86/include/asm/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
-
-# default subarch .h files
-mflags-y += -Iarch/x86/include/asm/mach-default
-
-# 64 bit does not support subarch support - clear sub arch variables
-fcore-$(CONFIG_X86_64)  :=
-mcore-$(CONFIG_X86_64)  :=
-
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
 
@@ -145,9 +127,6 @@ core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
 core-y += arch/x86/kernel/
 core-y += arch/x86/mm/
 
-# Remaining sub architecture files
-core-y += $(mcore-y)
-
 core-y += arch/x86/crypto/
 core-y += arch/x86/vdso/
 core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 6a77068e261..b03711d7990 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -215,6 +215,7 @@ static inline void disable_local_APIC(void) { }
 #define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
 
+#ifdef CONFIG_X86_LOCAL_APIC
 static inline unsigned default_get_apic_id(unsigned long x)
 {
 	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
@@ -224,6 +225,7 @@ static inline unsigned default_get_apic_id(unsigned long x)
 	else
 		return (x >> 24) & 0x0F;
 }
+#endif
 
 #endif
 
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index d3f8f49aed6..1bc4cdc797d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -63,7 +63,7 @@ obj-$(CONFIG_SMP)		+= setup_percpu.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o ipi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 241a01d6fd4..3378ffb2140 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -797,23 +797,6 @@ static void clear_IO_APIC (void)
 			clear_IO_APIC_pin(apic, pin);
 }
 
-#if !defined(CONFIG_SMP) && defined(CONFIG_X86_32)
-void default_send_IPI_self(int vector)
-{
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | apic->dest_logical;
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write(APIC_ICR, cfg);
-}
-#endif /* !CONFIG_SMP && CONFIG_X86_32*/
-
 #ifdef CONFIG_X86_32
 /*
  * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index a6fba691416..61339a0d55c 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -32,6 +32,26 @@
 #include <asm/genapic.h>
 #include <asm/ipi.h>
 
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+
+#include <asm/genapic.h>
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define DEFAULT_SEND_IPI	(1)
+#else
+#define DEFAULT_SEND_IPI	(0)
+#endif
+
+int no_broadcast = DEFAULT_SEND_IPI;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
 	/*
@@ -246,3 +266,146 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	}
 	return 0;
 }
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *	Perform any necessary interrupt initialisation prior to setting up
+ *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *	interrupts should be initialised here if the machine emulates a PC
+ *	in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
+			return;
+	}
+	init_ISA_irqs();
+}
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ *	Fill in any interrupts that may have been left out by the general
+ *	init_IRQ() routine.  interrupts having to do with the machine rather
+ *	than the devices on the I/O bus (like APIC interrupts in intel MP
+ *	systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
+			return;
+	}
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ *	generally used to activate any machine specific identification
+ *	routines that may be needed before setup_arch() runs.  On Voyager
+ *	this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ *	Called as the final act of trap_init().  Used in VISWS to initialise
+ *	the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
+			return;
+	}
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.mask = CPU_MASK_NONE,
+	.name = "timer"
+};
+
+/**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ *	Must plug the system timer interrupt source at HZ into the IRQ listed
+ *	in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+	if (x86_quirks->arch_time_init) {
+		/*
+		 * A nonzero return code does not mean failure, it means
+		 * that the architecture quirk does not want any
+		 * generic (timer) setup to be performed after this:
+		 */
+		if (x86_quirks->arch_time_init())
+			return;
+	}
+
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
+ *	along the MCA bus.  Use this to hook into that chain if you will need
+ *	it.
+ **/
+void mca_nmi_hook(void)
+{
+	/*
+	 * If I recall correctly, there's a whole bunch of other things that
+	 * we can do to check for NMI problems, but that's all I know about
+	 * at the moment.
+	 */
+	pr_warning("NMI generated from unknown source!\n");
+}
+#endif
+
+static __init int no_ipi_broadcast(char *str)
+{
+	get_option(&str, &no_broadcast);
+	pr_info("Using %s mode\n",
+		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
+	return 1;
+}
+__setup("no_ipi_broadcast=", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+	pr_info("Using IPI %s mode\n",
+		no_broadcast ? "No-Shortcut" : "Shortcut");
+	return 0;
+}
+
+late_initcall(print_ipi_mode);
+
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
deleted file mode 100644
index b65ff0bf730..00000000000
--- a/arch/x86/mach-default/setup.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *	Machine specific setup for generic
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/acpi.h>
-#include <asm/arch_hooks.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-#include <asm/genapic.h>
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-int no_broadcast = DEFAULT_SEND_IPI;
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	if (x86_quirks->arch_pre_intr_init) {
-		if (x86_quirks->arch_pre_intr_init())
-			return;
-	}
-	init_ISA_irqs();
-}
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-	if (x86_quirks->arch_intr_init) {
-		if (x86_quirks->arch_intr_init())
-			return;
-	}
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On Voyager
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-	if (x86_quirks->arch_trap_init) {
-		if (x86_quirks->arch_trap_init())
-			return;
-	}
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-/**
- * pre_time_init_hook - do any specific initialisations before.
- *
- **/
-void __init pre_time_init_hook(void)
-{
-	if (x86_quirks->arch_pre_time_init)
-		x86_quirks->arch_pre_time_init();
-}
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	if (x86_quirks->arch_time_init) {
-		/*
-		 * A nonzero return code does not mean failure, it means
-		 * that the architecture quirk does not want any
-		 * generic (timer) setup to be performed after this:
-		 */
-		if (x86_quirks->arch_time_init())
-			return;
-	}
-
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void mca_nmi_hook(void)
-{
-	/*
-	 * If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-	pr_warning("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	pr_info("Using %s mode\n",
-		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
-	return 1;
-}
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
-	pr_info("Using IPI %s mode\n",
-		no_broadcast ? "No-Shortcut" : "Shortcut");
-	return 0;
-}
-
-late_initcall(print_ipi_mode);
-
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
deleted file mode 100644
index d9d44c8c3db..00000000000
--- a/arch/x86/mach-generic/default.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Default generic APIC driver. This handles up to 8 CPUs.
- */
-#define APIC_DEFINITION 1
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/genapic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <asm/genapic.h>
-#include <asm/ipi.h>
-
-static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	/*
-	 * Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
-}
-
-/* should be called last. */
-static int probe_default(void)
-{
-	return 1;
-}
-
-struct genapic apic_default = {
-
-	.name				= "default",
-	.probe				= probe_default,
-	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= default_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* logical delivery broadcast to all CPUs: */
-	.irq_dest_mode			= 1,
-
-	.target_cpus			= default_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= default_check_apicid_used,
-	.check_apicid_present		= default_check_apicid_present,
-
-	.vector_allocation_domain	= default_vector_allocation_domain,
-	.init_apic_ldr			= default_init_apic_ldr,
-
-	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= default_apicid_to_node,
-	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= default_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= default_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0x0F << 24,
-
-	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= default_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= default_send_IPI_allbutself,
-	.send_IPI_all			= default_send_IPI_all,
-	.send_IPI_self			= NULL,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
-	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-};
-- 
cgit v1.2.3


From e7c64981949ec983ee41c2927c036fdb00d8e68b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:54:17 +0100
Subject: x86/Voyager: clean up BROKEN Kconfig reference

CONFIG_BROKEN has been removed from the upstream kernel years ago,
but X86_VOYAGER still had a stale reference to it - remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d6218e6c982..45c7bdbc156 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -303,7 +303,7 @@ config X86_ELAN
 
 config X86_VOYAGER
 	bool "Voyager (NCR)"
-	depends on X86_32 && (SMP || BROKEN) && !PCI
+	depends on X86_32 && SMP && !PCI
 	help
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-- 
cgit v1.2.3


From 61b8172e57c4b8db1fcb7f5fd8dfda85ffd8e052 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 28 Jan 2009 19:55:34 +0100
Subject: x86: disable Voyager temporarily

x86/Voyager does not build right now and it's unclear whether it will
be cleaned up and ported to the subarch-less 32-bit x86 code - so disable
it for now.

If it's fixed we'll re-enable it - or remove it after some time. There's
a very low number of systems running development kernels on x86/Voyager
currently. (one or two on the whole planet)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 45c7bdbc156..f983f4055b1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -303,7 +303,7 @@ config X86_ELAN
 
 config X86_VOYAGER
 	bool "Voyager (NCR)"
-	depends on X86_32 && SMP && !PCI
+	depends on X86_32 && SMP && !PCI && BROKEN
 	help
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-- 
cgit v1.2.3


From 72ee6ebbb3fe1ac23d1a669b177b858d2028bf09 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 16:57:49 +0100
Subject: x86/Voyager: remove MCA Kconfig quirk

Remove Voyager Kconfig quirk: just like any other hardware platform
users of Voyager systems can configure in the hardware drivers they need.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f983f4055b1..ae37a7504b5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1873,8 +1873,7 @@ config EISA
 source "drivers/eisa/Kconfig"
 
 config MCA
-	bool "MCA support" if !X86_VOYAGER
-	default y if X86_VOYAGER
+	bool "MCA support"
 	help
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
 	  laptops.  It is a bus system similar to PCI or ISA. See
-- 
cgit v1.2.3


From 07ef83ae9e99377f38f4d0e472ba6ff09324e5e9 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 16:59:11 +0100
Subject: x86/Voyager: remove NATSEMI Kconfig quirk

x86/Voyager has this quirk for SCx200 support:

 config SCx200
 	tristate "NatSemi SCx200 support"
	depends on !X86_VOYAGER

Remove it - Voyager users can disable drivers they dont need.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ae37a7504b5..9727dd59f54 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1884,7 +1884,6 @@ source "drivers/mca/Kconfig"
 
 config SCx200
 	tristate "NatSemi SCx200 support"
-	depends on !X86_VOYAGER
 	help
 	  This provides basic support for National Semiconductor's
 	  (now AMD's) Geode processors.  The driver probes for the
-- 
cgit v1.2.3


From e0ec9483dbe8f534e0f3ef413f9eba9a5ff78050 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:01:14 +0100
Subject: x86/Voyager: remove KVM Kconfig quirk

Voyager and other subarchitectures have this Kconfig quirk:

 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)

This is unnecessary, as KVM cleanly detects based on CPUID capabilities.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9727dd59f54..a783fe7759c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -34,7 +34,7 @@ config X86
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
+	select HAVE_KVM
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_GENERIC_DMA_COHERENT if X86_32
-- 
cgit v1.2.3


From 49793b0341a802cf5ee4179e837a2eb20f12c9fe Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:02:29 +0100
Subject: x86/Voyager: remove KGDB Kconfig quirk

x86/Voyager has this KGDB quirk:

	select HAVE_ARCH_KGDB if !X86_VOYAGER

This is completely pointless - there's nothing in KGDB that cannot work
on Voyager. Remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a783fe7759c..12b433aaaa6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -35,7 +35,7 @@ config X86
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_KVM
-	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
-- 
cgit v1.2.3


From aced3cee555f0b2fd58501e9b8a8a1295011e134 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:03:24 +0100
Subject: x86/Voyager: remove HIBERNATION Kconfig quirk

Voyager has this hibernation quirk:

 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
	depends on !SMP || !X86_VOYAGER

Hibernation is a generic facility provided on all x86 platforms. If it
is buggy on Voyager then that bug should be fixed - not worked around.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 12b433aaaa6..df952e788a6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -140,7 +140,7 @@ config HAVE_CPUMASK_OF_CPU_MAP
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on !SMP || !X86_VOYAGER
+	depends on !SMP
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-- 
cgit v1.2.3


From f2fc0e3071230bb9ea9f64a08c3e619ad1357cfb Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:04:39 +0100
Subject: x86/Voyager: remove ARCH_SUSPEND_POSSIBLE Kconfig quirk

Voyager has this Kconfig quirk for suspend/resume:

 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on !X86_VOYAGER

The proper mechanism to not suspend on a piece of hardware to disable
CONFIG_SUSPEND. Remove the quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index df952e788a6..8e6413e0e7c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -144,7 +144,6 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on !X86_VOYAGER
 
 config ZONE_DMA32
 	bool
-- 
cgit v1.2.3


From 3e5095d15276efd14a45393666b1bb7536bf179f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:07:08 +0100
Subject: x86: replace CONFIG_X86_SMP with CONFIG_SMP

The x86/Voyager subarch used to have this distinction between
 'x86 SMP support' and 'Voyager SMP support':

 config X86_SMP
	bool
	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)

This is a pointless distinction - Voyager can (and already does) use
smp_ops to implement various SMP quirks it has - and it can be extended
more to cover all the specialities of Voyager.

So remove this complication in the Kconfig space.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                           | 7 +------
 arch/x86/Kconfig.debug                     | 2 +-
 arch/x86/include/asm/entry_arch.h          | 2 +-
 arch/x86/include/asm/hw_irq.h              | 2 +-
 arch/x86/kernel/Makefile                   | 4 ++--
 arch/x86/kernel/apic.c                     | 2 +-
 arch/x86/kernel/cpu/addon_cpuid_features.c | 2 +-
 arch/x86/kernel/process.c                  | 2 +-
 arch/x86/kernel/setup.c                    | 2 +-
 arch/x86/kernel/tsc.c                      | 2 +-
 arch/x86/kernel/vmiclock_32.c              | 2 +-
 arch/x86/mm/Makefile                       | 2 +-
 12 files changed, 13 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8e6413e0e7c..3671506fb8d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -173,11 +173,6 @@ config GENERIC_PENDING_IRQ
 	depends on GENERIC_HARDIRQS && SMP
 	default y
 
-config X86_SMP
-	bool
-	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
-	default y
-
 config USE_GENERIC_SMP_HELPERS
 	def_bool y
 	depends on SMP
@@ -203,7 +198,7 @@ config X86_BIOS_REBOOT
 
 config X86_TRAMPOLINE
 	bool
-	depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
+	depends on SMP || (64BIT && ACPI_SLEEP)
 	default y
 
 config KTIME_SCALAR
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 28f111461ca..a38dd6064f1 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -83,7 +83,7 @@ config DEBUG_PAGEALLOC
 config DEBUG_PER_CPU_MAPS
 	bool "Debug access to per_cpu maps"
 	depends on DEBUG_KERNEL
-	depends on X86_SMP
+	depends on SMP
 	default n
 	help
 	  Say Y to verify that the per_cpu map being accessed has
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index b87b077cc23..854d538ae85 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -9,7 +9,7 @@
  * is no hardware IRQ pin equivalent for them, they are triggered
  * through the ICC by us (IPIs)
  */
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
 BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
 BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index bfa921fad13..41550797396 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -98,7 +98,7 @@ extern asmlinkage void qic_call_function_interrupt(void);
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
 extern void smp_error_interrupt(struct pt_regs *);
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(struct pt_regs *);
 extern void smp_call_function_interrupt(struct pt_regs *);
 extern void smp_call_function_single_interrupt(struct pt_regs *);
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 1bc4cdc797d..dc05a57a474 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -57,8 +57,8 @@ obj-$(CONFIG_X86_CPUID)		+= cpuid.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
-obj-$(CONFIG_X86_SMP)		+= smp.o
-obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SMP)		+= smpboot.o tsc_sync.o ipi.o
 obj-$(CONFIG_SMP)		+= setup_percpu.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 81efe86eca8..968c817762a 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1900,7 +1900,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	}
 #endif
 
-#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
+#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
 	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
 #endif
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 4a48bb40974..e48640cfac0 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -69,7 +69,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
  */
 void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 	unsigned int eax, ebx, ecx, edx, sub_index;
 	unsigned int ht_mask_width, core_plus_mask_width;
 	unsigned int core_select_mask, core_level_siblings;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e68bb9e3086..89537f678b2 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -344,7 +344,7 @@ static void c1e_idle(void)
 
 void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 	if (pm_idle == poll_idle && smp_num_siblings > 1) {
 		printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
 			" performance may degrade.\n");
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index e645d4793e4..eeb180b1d7a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -588,7 +588,7 @@ early_param("elfcorehdr", setup_elfcorehdr);
 
 static int __init default_update_genapic(void)
 {
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 	if (!apic->wakeup_cpu)
 		apic->wakeup_cpu = wakeup_secondary_cpu_via_init;
 #endif
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 599e5816863..83d53ce5d4c 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -773,7 +773,7 @@ __cpuinit int unsynchronized_tsc(void)
 	if (!cpu_has_tsc || tsc_unstable)
 		return 1;
 
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 	if (apic_is_clustered_box())
 		return 1;
 #endif
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index c4c1f9e0940..a4791ef412d 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -256,7 +256,7 @@ void __devinit vmi_time_bsp_init(void)
 	 */
 	clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
 	local_irq_disable();
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
 	/*
 	 * XXX handle_percpu_irq only defined for SMP; we need to switch over
 	 * to using it, since this is a local interrupt, which each CPU must
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9f05157220f..2b938a38491 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,7 +1,7 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o gup.o
 
-obj-$(CONFIG_X86_SMP)		+= tlb.o
+obj-$(CONFIG_SMP)		+= tlb.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
-- 
cgit v1.2.3


From c0b5842a457d44c8788b3fd0c64969be7ef673cd Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:13:05 +0100
Subject: x86: generalize boot_cpu_id

x86/Voyager can boot on non-zero processors. While that can probably
be fixed by properly remapping the physical CPU IDs, keep boot_cpu_id
for now for easier transition - and expand it to all of x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig           |  4 ----
 arch/x86/include/asm/cpu.h |  6 +-----
 arch/x86/kernel/setup.c    | 14 ++++++++++++++
 arch/x86/kernel/smpboot.c  | 12 ------------
 4 files changed, 15 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3671506fb8d..f4dd851384d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -238,10 +238,6 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
-config X86_HAS_BOOT_CPU_ID
-	def_bool y
-	depends on X86_VOYAGER
-
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
 	depends on PCI_MSI || HT_IRQ
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index f03b23e3286..b185091bf19 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -32,10 +32,6 @@ extern void arch_unregister_cpu(int);
 
 DECLARE_PER_CPU(int, cpu_state);
 
-#ifdef CONFIG_X86_HAS_BOOT_CPU_ID
-extern unsigned char boot_cpu_id;
-#else
-#define boot_cpu_id				0
-#endif
+extern unsigned int boot_cpu_id;
 
 #endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index eeb180b1d7a..609e5af6028 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -112,6 +112,20 @@
 #define ARCH_SETUP
 #endif
 
+unsigned int boot_cpu_id __read_mostly;
+
+#ifdef CONFIG_X86_64
+int default_cpu_present_to_apicid(int mps_cpu)
+{
+	return __default_cpu_present_to_apicid(mps_cpu);
+}
+
+int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
+#endif
+
 #ifndef CONFIG_DEBUG_BOOT_PARAMS
 struct boot_params __initdata boot_params;
 #else
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index e90b3e50b54..bc7e220ba0b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -905,18 +905,6 @@ do_rest:
 	return boot_error;
 }
 
-#ifdef CONFIG_X86_64
-int default_cpu_present_to_apicid(int mps_cpu)
-{
-	return __default_cpu_present_to_apicid(mps_cpu);
-}
-
-int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
-}
-#endif
-
 int __cpuinit native_cpu_up(unsigned int cpu)
 {
 	int apicid = apic->cpu_present_to_apicid(cpu);
-- 
cgit v1.2.3


From 23394d1c9346d9c0aabbc1b6fca52a9c0aa1c297 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:16:16 +0100
Subject: x86/Voyager: remove X86_HT Kconfig quirk

Voyager has this Kconfig quirk:

	depends on (X86_32 && !X86_VOYAGER) || X86_64

That is unnecessary as HT support is CPUID driven and explicitly
 enumerated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f4dd851384d..1d50c9de4d2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -188,7 +188,6 @@ config X86_64_SMP
 config X86_HT
 	bool
 	depends on SMP
-	depends on (X86_32 && !X86_VOYAGER) || X86_64
 	default y
 
 config X86_BIOS_REBOOT
-- 
cgit v1.2.3


From f095df0a0cb35a52605541f619d038339b90d7cc Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:17:55 +0100
Subject: x86/Voyager: remove X86_BIOS_REBOOT Kconfig quirk

Voyager has this Kconfig quirk:

config X86_BIOS_REBOOT
	bool
	depends on !X86_VOYAGER
	default y

Voyager should use the existing machine_ops.emergency_restart reboot
quirk mechanism instead of a build-time quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig             | 6 ------
 arch/x86/include/asm/proto.h | 4 ----
 arch/x86/kernel/Makefile     | 2 +-
 3 files changed, 1 insertion(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1d50c9de4d2..c0d79ab366d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -190,11 +190,6 @@ config X86_HT
 	depends on SMP
 	default y
 
-config X86_BIOS_REBOOT
-	bool
-	depends on !X86_VOYAGER
-	default y
-
 config X86_TRAMPOLINE
 	bool
 	depends on SMP || (64BIT && ACPI_SLEEP)
@@ -1361,7 +1356,6 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call"
-	depends on X86_BIOS_REBOOT
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index d6a22f92ba7..49fb3ecf3bb 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -18,11 +18,7 @@ extern void syscall32_cpu_init(void);
 
 extern void check_efer(void);
 
-#ifdef CONFIG_X86_BIOS_REBOOT
 extern int reboot_force;
-#else
-static const int reboot_force = 0;
-#endif
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index dc05a57a474..24f357e7557 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -50,7 +50,7 @@ obj-y				+= step.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-y				+= cpu/
 obj-y				+= acpi/
-obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
+obj-y				+= reboot.o
 obj-$(CONFIG_MCA)		+= mca_32.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-- 
cgit v1.2.3


From 550fe4f198558c147c6b8273a709568222a1668a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:28:08 +0100
Subject: x86/Voyager: remove X86_FIND_SMP_CONFIG Kconfig quirk

x86/Voyager had this Kconfig quirk:

 config X86_FIND_SMP_CONFIG
	def_bool y
	depends on X86_MPPARSE || X86_VOYAGER

Which splits off the find_smp_config() callback into a build-time quirk.

Voyager should use the existing x86_quirks.mach_find_smp_config() callback
to introduce SMP-config quirks. NUMAQ-32 and VISWS already use this.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig              | 4 ----
 arch/x86/include/asm/mpspec.h | 4 +++-
 arch/x86/kernel/setup.c       | 3 +--
 3 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c0d79ab366d..df7cb8d68e2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -254,10 +254,6 @@ config NUMA_MIGRATE_IRQ_DESC
 
 	  If you don't know what to do here, say N.
 
-config X86_FIND_SMP_CONFIG
-	def_bool y
-	depends on X86_MPPARSE || X86_VOYAGER
-
 config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
 	default y
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 03fb0d39654..d22f732eab8 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -56,11 +56,13 @@ extern int smp_found_config;
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;
 
-extern void find_smp_config(void);
 extern void get_smp_config(void);
+
 #ifdef CONFIG_X86_MPPARSE
+extern void find_smp_config(void);
 extern void early_reserve_e820_mpc_new(void);
 #else
+static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
 #endif
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 609e5af6028..6abce6703c5 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -905,12 +905,11 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	acpi_reserve_bootmem();
 #endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
 	/*
 	 * Find and reserve possible boot-time SMP configuration:
 	 */
 	find_smp_config();
-#endif
+
 	reserve_crashkernel();
 
 #ifdef CONFIG_X86_64
-- 
cgit v1.2.3


From 36619a8a80793a803588a17f772313d5c948357d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:33:34 +0100
Subject: x86/VisWS: remove Kconfig quirk

VisWS has this quirk currently:

 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
	depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT

The !Voyager quirk is unnecessary.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index df7cb8d68e2..f59d2920198 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -351,7 +351,7 @@ endchoice
 
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
+	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
 	help
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
-- 
cgit v1.2.3


From f154f47d5180c2012bf97999e6c600d45db8af2d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:34:56 +0100
Subject: x86/Voyager: remove VMI Kconfig quirk

x86/Voyager has this build-time quirk:

 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
	depends on !X86_VOYAGER

Since VMI is auto-detected (and Voyager will be auto-detected) there's no
reason for this quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f59d2920198..4bd0c8febae 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -406,7 +406,6 @@ config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
-	depends on !X86_VOYAGER
 	help
 	  VMI provides a paravirtualized interface to the VMware ESX server
 	  (it could be used by other hypervisors in theory too, but is not
-- 
cgit v1.2.3


From e084e531000a488d2d27864266c13ac824575a8b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:36:31 +0100
Subject: x86/Voyager: remove KVM_CLOCK quirk

Voyager has this build-time quirk to exclude KVM_CLOCK:

 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
	depends on !X86_VOYAGER

Voyager support built into a kernel image does not exclude
KVM paravirt clock support - so remove this quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4bd0c8febae..0bf0653969d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -416,7 +416,6 @@ config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on !X86_VOYAGER
 	help
 	  Turning on this option will allow you to run a paravirtualized clock
 	  when running over the KVM hypervisor. Instead of relying on a PIT
-- 
cgit v1.2.3


From 54523edd237b9e792a3b76988fde23a91d739f43 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:37:33 +0100
Subject: x86/Voyager: remove KVM_GUEST quirk

Voyager has this quirk currently:

 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
	depends on !X86_VOYAGER

Voyager support built into a kernel image does not exclude
KVM paravirt guest support - so remove this quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0bf0653969d..363111f40f3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -426,7 +426,6 @@ config KVM_CLOCK
 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
-	depends on !X86_VOYAGER
 	help
 	 This option enables various optimizations for running under the KVM
 	 hypervisor.
-- 
cgit v1.2.3


From c3e6a2042fef33b747d2ae3961f5312af801973d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:38:46 +0100
Subject: x86/Voyager: remove PARAVIRT Kconfig quirk

Remove this Kconfig quirk:

 config PARAVIRT
 	bool "Enable paravirtualization code"
	depends on !X86_VOYAGER
 	help

Voyager support built into a kernel does not preclude paravirt support.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 363111f40f3..82105349612 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -434,7 +434,6 @@ source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT
 	bool "Enable paravirtualization code"
-	depends on !X86_VOYAGER
 	help
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
-- 
cgit v1.2.3


From 7cd92366a593246650cc7d6198e2c7d3af8c1d8a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:40:48 +0100
Subject: x86/Voyager: remove APIC/IO-APIC Kbuild quirk

The lapic/ioapic code properly auto-detects and is safe to run on CPUs that
have no local APIC. (or which have their lapic turned off in the hardware)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 82105349612..6fbb3639d7b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -642,7 +642,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
+	depends on X86_32 && !SMP && !X86_GENERICARCH
 	help
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -667,11 +667,11 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
+	depends on X86_64 || SMP || X86_GENERICARCH || X86_UP_APIC
 
 config X86_IO_APIC
 	def_bool y
-	depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
+	depends on X86_64 || SMP || X86_GENERICARCH || X86_UP_APIC
 
 config X86_VISWS_APIC
 	def_bool y
-- 
cgit v1.2.3


From e006235e5b9cfb785ecbc05551788e33f96ea0ce Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:45:17 +0100
Subject: x86/Voyager: remove MCE quirk

If no MCE code is desired on Voyager hw then the solution
is to turn them off in the .config - and to extend the MCE
code to not initialize on Voyager.

Remove the build-time quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6fbb3639d7b..7cf9f0a8c8c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -703,7 +703,6 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 
 config X86_MCE
 	bool "Machine Check Exception"
-	depends on !X86_VOYAGER
 	---help---
 	  Machine Check Exception support allows the processor to notify the
 	  kernel if it detects a problem (e.g. overheating, component failure).
-- 
cgit v1.2.3


From 4b19ed915576e8034c3653b4b10b79bde10f69fa Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:47:24 +0100
Subject: x86/Voyager: remove HOTPLUG_CPU Kconfig quirk

Voyager has this Kconfig quirk:

 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
	depends on SMP && HOTPLUG && !X86_VOYAGER

But this exception will be moot once Voyager starts using the
generic x86 code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7cf9f0a8c8c..206645ac6f6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1470,7 +1470,7 @@ config PHYSICAL_ALIGN
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
-	depends on SMP && HOTPLUG && !X86_VOYAGER
+	depends on SMP && HOTPLUG
 	---help---
 	  Say Y here to allow turning CPUs off and on. CPUs can be
 	  controlled through /sys/devices/system/cpu.
-- 
cgit v1.2.3


From 1c61d8c309a4080980474de8c6689527be180782 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:49:22 +0100
Subject: x86/Voyager: remove power management Kconfig quirk

Voyager has this PM/ACPI Kconfig quirk:

 menu "Power management and ACPI options"
	depends on !X86_VOYAGER

Most of the PM features are auto-detect so they should be safe to run
on just about any hardware. (If not, those instances need fixing.)

In any case, if a kernel is built for Voyager, the power management
options can be disabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 206645ac6f6..f95c3b40e45 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1551,7 +1551,6 @@ config HAVE_ARCH_EARLY_PFN_TO_NID
 	depends on NUMA
 
 menu "Power management and ACPI options"
-	depends on !X86_VOYAGER
 
 config ARCH_HIBERNATION_HEADER
 	def_bool y
-- 
cgit v1.2.3


From 1ec2dafd937c0f6fed46cbd8f6878f2c1db4a623 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 17:51:37 +0100
Subject: x86/Voyager: remove ISA quirk

Voyager has this ISA quirk (because Voyager has no ISA support):

 config ISA
 	bool "ISA support"
	depends on !X86_VOYAGER

There's a ton of x86 hardware that does not support ISA, and because
most ISA drivers cannot auto-detect in a safe way, the convention in
the kernel has always been to not enable ISA drivers if they are not
needed.

Voyager users can do likewise - no need for a Kconfig quirk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f95c3b40e45..38ed1a6c6d8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1819,7 +1819,6 @@ if X86_32
 
 config ISA
 	bool "ISA support"
-	depends on !X86_VOYAGER
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
-- 
cgit v1.2.3


From 06ac8346af04f6a972072f6c5780ba734832ad13 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:11:43 +0100
Subject: x86: cleanup, introduce CONFIG_NON_STANDARD_PLATFORMS

Introduce a Y/N Kconfig option for non-PC x86 platforms.

Make VisWS, RDC321 and SGI/UV depend on this.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 38ed1a6c6d8..b090e5a27da 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -349,9 +349,23 @@ config X86_VSMP
 
 endchoice
 
+config X86_NON_STANDARD
+	bool "Support for non-standard x86 platforms"
+	help
+	  If you disable this option then the kernel will only support
+	  standard PC platforms. (which covers the vast majority of
+	  systems out there.)
+
+	  If you enable this option then you'll be able to select a number
+	  of less common non-PC x86 platforms: VisWS, RDC321, SGI/UV.
+
+	  If you have one of these systems, or if you want to build a
+	  generic distribution kernel, say Y here - otherwise say N.
+
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
+	depends on X86_NON_STANDARD
 	help
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
@@ -364,6 +378,7 @@ config X86_VISWS
 config X86_RDC321X
 	bool "RDC R-321x SoC"
 	depends on X86_32
+	depends on X86_NON_STANDARD
 	select M486
 	select X86_REBOOTFIXUPS
 	help
@@ -374,6 +389,7 @@ config X86_RDC321X
 config X86_UV
 	bool "SGI Ultraviolet"
 	depends on X86_64
+	depends on X86_NON_STANDARD
 	help
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
-- 
cgit v1.2.3


From 9e111f3e167a14dd6252cff14fc7dd2ba4c650c6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:18:25 +0100
Subject: x86: move ELAN to the NON_STANDARD_PLATFORM section

Move X86_ELAN (old, AMD based web-boxes) from the subarchitecture
menu to the non-standard-platform section.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b090e5a27da..b7617e3781a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -271,16 +271,6 @@ config X86_PC
 	help
 	  Choose this option if your computer is a standard PC or compatible.
 
-config X86_ELAN
-	bool "AMD Elan"
-	depends on X86_32
-	help
-	  Select this for an AMD Elan processor.
-
-	  Do not use this option for K6/Athlon/Opteron processors!
-
-	  If unsure, choose "PC-compatible" instead.
-
 config X86_VOYAGER
 	bool "Voyager (NCR)"
 	depends on X86_32 && SMP && !PCI && BROKEN
@@ -394,6 +384,17 @@ config X86_UV
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
 
+config X86_ELAN
+	bool "AMD Elan"
+	depends on X86_32
+	depends on X86_NON_STANDARD
+	help
+	  Select this for an AMD Elan processor.
+
+	  Do not use this option for K6/Athlon/Opteron processors!
+
+	  If unsure, choose "PC-compatible" instead.
+
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
-- 
cgit v1.2.3


From f67ae5c9e52e385492b94c14376e322004701555 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:20:09 +0100
Subject: x86: move VOYAGER to the NON_STANDARD_PLATFORM section

Move X86_ELAN (old, NCR hw platform built on Intel CPUs) from the
subarchitecture menu to the non-standard-platform section.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b7617e3781a..207dc9592d5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -271,18 +271,6 @@ config X86_PC
 	help
 	  Choose this option if your computer is a standard PC or compatible.
 
-config X86_VOYAGER
-	bool "Voyager (NCR)"
-	depends on X86_32 && SMP && !PCI && BROKEN
-	help
-	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
-	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-
-	  *** WARNING ***
-
-	  If you do not specifically know you have a Voyager based machine,
-	  say N here, otherwise the kernel you build will not be bootable.
-
 config X86_GENERICARCH
        bool "Generic architecture"
 	depends on X86_32
@@ -395,6 +383,19 @@ config X86_ELAN
 
 	  If unsure, choose "PC-compatible" instead.
 
+config X86_VOYAGER
+	bool "Voyager (NCR)"
+	depends on X86_32 && SMP && !PCI && BROKEN
+	depends on X86_NON_STANDARD
+	help
+	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
+	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
+
+	  *** WARNING ***
+
+	  If you do not specifically know you have a Voyager based machine,
+	  say N here, otherwise the kernel you build will not be bootable.
+
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
-- 
cgit v1.2.3


From 9c39801763ed6e08ea8bc694c5ab936643a2b763 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:24:57 +0100
Subject: x86: move non-standard 32-bit platform Kconfig entries

- make X86_GENERICARCH depend X86_NON_STANDARD

- move X86_SUMMIT, X86_ES7000 and X86_BIGSMP out of the subarchitecture
  menu and under this option

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 88 +++++++++++++++++++++++++++-----------------------------
 1 file changed, 43 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 207dc9592d5..2fe298297ce 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -271,51 +271,6 @@ config X86_PC
 	help
 	  Choose this option if your computer is a standard PC or compatible.
 
-config X86_GENERICARCH
-       bool "Generic architecture"
-	depends on X86_32
-       help
-          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
-	  subarchitectures.  It is intended for a generic binary kernel.
-	  if you select them all, kernel will probe it one by one. and will
-	  fallback to default.
-
-if X86_GENERICARCH
-
-config X86_NUMAQ
-	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32 && PCI && X86_MPPARSE
-	select NUMA
-	help
-	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
-	  NUMA multiquad box. This changes the way that processors are
-	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
-	  of Flat Logical.  You will need a new lynxer.elf file to flash your
-	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
-
-config X86_SUMMIT
-	bool "Summit/EXA (IBM x440)"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for IBM systems that use the Summit/EXA chipset.
-	  In particular, it is needed for the x440.
-
-config X86_ES7000
-	bool "Support for Unisys ES7000 IA32 series"
-	depends on X86_32 && SMP
-	help
-	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
-	  supposed to run on an IA32-based Unisys ES7000 system.
-
-config X86_BIGSMP
-	bool "Support for big SMP systems with more than 8 CPUs"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for the systems that have more than 8 CPUs
-	  and if the system is not of any sub-arch type above.
-
-endif
-
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
@@ -396,6 +351,49 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
+config X86_GENERICARCH
+	bool "Support non-standard 32-bit SMP architectures"
+	depends on X86_32 && SMP
+	depends on X86_NON_STANDARD
+	help
+          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	  subarchitectures.  It is intended for a generic binary kernel.
+	  if you select them all, kernel will probe it one by one. and will
+	  fallback to default.
+
+config X86_NUMAQ
+	bool "NUMAQ (IBM/Sequent)"
+	depends on X86_GENERICARCH
+	select NUMA
+	select X86_MPPARSE
+	help
+	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+	  NUMA multiquad box. This changes the way that processors are
+	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
+	  of Flat Logical.  You will need a new lynxer.elf file to flash your
+	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
+
+config X86_SUMMIT
+	bool "Summit/EXA (IBM x440)"
+	depends on X86_GENERICARCH
+	help
+	  This option is needed for IBM systems that use the Summit/EXA chipset.
+	  In particular, it is needed for the x440.
+
+config X86_ES7000
+	bool "Support for Unisys ES7000 IA32 series"
+	depends on X86_GENERICARCH
+	help
+	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
+	  supposed to run on an IA32-based Unisys ES7000 system.
+
+config X86_BIGSMP
+	bool "Support for big SMP systems with more than 8 CPUs"
+	depends on X86_GENERICARCH
+	help
+	  This option is needed for the systems that have more than 8 CPUs
+	  and if the system is not of any sub-arch type above.
+
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
-- 
cgit v1.2.3


From 6a48565ed6ac76f351def25cd5e9f181331065f6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:29:13 +0100
Subject: x86: move X86_VSMP from subarch menu

Move X86_VSMP out of the subarch menu - this way it can be enabled
together with standard PC support as well, in the same kernel.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2fe298297ce..ddddfb8fe09 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -271,15 +271,6 @@ config X86_PC
 	help
 	  Choose this option if your computer is a standard PC or compatible.
 
-config X86_VSMP
-	bool "Support for ScaleMP vSMP"
-	select PARAVIRT
-	depends on X86_64 && PCI
-	help
-	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
-	  supposed to run on these EM64T-based machines.  Only choose this option
-	  if you have one of these machines.
-
 endchoice
 
 config X86_NON_STANDARD
@@ -327,6 +318,16 @@ config X86_UV
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
 
+config X86_VSMP
+	bool "Support for ScaleMP vSMP"
+	select PARAVIRT
+	depends on X86_64 && PCI
+	depends on X86_NON_STANDARD
+	help
+	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
+	  supposed to run on these EM64T-based machines.  Only choose this option
+	  if you have one of these machines.
+
 config X86_ELAN
 	bool "AMD Elan"
 	depends on X86_32
-- 
cgit v1.2.3


From e2c75d9f54334646b3dcdf1fea0d1afe7bfbf644 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:31:41 +0100
Subject: x86: remove the subarch menu

Remove the subarch menu and standardize on X86_PC.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ddddfb8fe09..4773f1c54fb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -262,16 +262,8 @@ config X86_MPPARSE
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
 
-choice
-	prompt "Subarchitecture Type"
-	default X86_PC
-
 config X86_PC
-	bool "PC-compatible"
-	help
-	  Choose this option if your computer is a standard PC or compatible.
-
-endchoice
+	def_bool y
 
 config X86_NON_STANDARD
 	bool "Support for non-standard x86 platforms"
-- 
cgit v1.2.3


From e0c7ae376a13fd79a4dad8becab51040d13dfa90 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:43:09 +0100
Subject: x86: rename X86_GENERICARCH to X86_32_NON_STANDARD

X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.

Rename it to X86_32_NON_STANDARD.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig            | 22 +++++++++++-----------
 arch/x86/kernel/acpi/boot.c |  2 +-
 arch/x86/kernel/mpparse.c   |  2 +-
 arch/x86/kernel/setup.c     |  2 +-
 arch/x86/kernel/smpboot.c   |  2 +-
 5 files changed, 15 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4773f1c54fb..1427cb1ccd9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -344,7 +344,7 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
-config X86_GENERICARCH
+config X86_32_NON_STANDARD
 	bool "Support non-standard 32-bit SMP architectures"
 	depends on X86_32 && SMP
 	depends on X86_NON_STANDARD
@@ -356,7 +356,7 @@ config X86_GENERICARCH
 
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
-	depends on X86_GENERICARCH
+	depends on X86_32_NON_STANDARD
 	select NUMA
 	select X86_MPPARSE
 	help
@@ -368,21 +368,21 @@ config X86_NUMAQ
 
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
-	depends on X86_GENERICARCH
+	depends on X86_32_NON_STANDARD
 	help
 	  This option is needed for IBM systems that use the Summit/EXA chipset.
 	  In particular, it is needed for the x440.
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
-	depends on X86_GENERICARCH
+	depends on X86_32_NON_STANDARD
 	help
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 
 config X86_BIGSMP
 	bool "Support for big SMP systems with more than 8 CPUs"
-	depends on X86_GENERICARCH
+	depends on X86_32_NON_STANDARD
 	help
 	  This option is needed for the systems that have more than 8 CPUs
 	  and if the system is not of any sub-arch type above.
@@ -475,11 +475,11 @@ config MEMTEST
 
 config X86_SUMMIT_NUMA
 	def_bool y
-	depends on X86_32 && NUMA && X86_GENERICARCH
+	depends on X86_32 && NUMA && X86_32_NON_STANDARD
 
 config X86_CYCLONE_TIMER
 	def_bool y
-	depends on X86_GENERICARCH
+	depends on X86_32_NON_STANDARD
 
 source "arch/x86/Kconfig.cpu"
 
@@ -651,7 +651,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !X86_GENERICARCH
+	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
 	help
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -676,11 +676,11 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	def_bool y
-	depends on X86_64 || SMP || X86_GENERICARCH || X86_UP_APIC
+	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
 
 config X86_IO_APIC
 	def_bool y
-	depends on X86_64 || SMP || X86_GENERICARCH || X86_UP_APIC
+	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
 
 config X86_VISWS_APIC
 	def_bool y
@@ -1122,7 +1122,7 @@ config ARCH_SPARSEMEM_DEFAULT
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH
+	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_32_NON_STANDARD
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index cb8b52785e3..7352c60f29d 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1335,7 +1335,7 @@ static void __init acpi_process_madt(void)
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_GENERICARCH
+#ifdef CONFIG_X86_32_NON_STANDARD
 			generic_bigsmp_probe();
 #endif
 			/*
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 94fe71029c3..89aaced51bd 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -372,7 +372,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 			(*x86_quirks->mpc_record)++;
 	}
 
-#ifdef CONFIG_X86_GENERICARCH
+#ifdef CONFIG_X86_32_NON_STANDARD
        generic_bigsmp_probe();
 #endif
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6abce6703c5..f64e1a487c9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -936,7 +936,7 @@ void __init setup_arch(char **cmdline_p)
 	map_vsyscall();
 #endif
 
-#ifdef CONFIG_X86_GENERICARCH
+#ifdef CONFIG_X86_32_NON_STANDARD
 	generic_apic_probe();
 #endif
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index bc7e220ba0b..fc80bc18943 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1007,7 +1007,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 
 		printk(KERN_WARNING
 		       "More than 8 CPUs detected - skipping them.\n"
-		       "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+		       "Use CONFIG_X86_32_NON_STANDARD and CONFIG_X86_BIGSMP.\n");
 
 		nr = 0;
 		for_each_present_cpu(cpu) {
-- 
cgit v1.2.3


From 3769e7b4d8ef113e08221a210f849ba57475aff5 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 27 Jan 2009 18:46:23 +0100
Subject: x86/Voyager: move to the X86_32_NON_STANDARD code section

Make Voyager depend on X86_32_NON_STANDARD - it is a non-standard 32-bit
SMP architecture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1427cb1ccd9..5bf0e0c5828 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -331,19 +331,6 @@ config X86_ELAN
 
 	  If unsure, choose "PC-compatible" instead.
 
-config X86_VOYAGER
-	bool "Voyager (NCR)"
-	depends on X86_32 && SMP && !PCI && BROKEN
-	depends on X86_NON_STANDARD
-	help
-	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
-	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-
-	  *** WARNING ***
-
-	  If you do not specifically know you have a Voyager based machine,
-	  say N here, otherwise the kernel you build will not be bootable.
-
 config X86_32_NON_STANDARD
 	bool "Support non-standard 32-bit SMP architectures"
 	depends on X86_32 && SMP
@@ -354,6 +341,13 @@ config X86_32_NON_STANDARD
 	  if you select them all, kernel will probe it one by one. and will
 	  fallback to default.
 
+config X86_BIGSMP
+	bool "Support for big SMP systems with more than 8 CPUs"
+	depends on X86_32_NON_STANDARD
+	help
+	  This option is needed for the systems that have more than 8 CPUs
+	  and if the system is not of any sub-arch type above.
+
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
 	depends on X86_32_NON_STANDARD
@@ -380,12 +374,18 @@ config X86_ES7000
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 
-config X86_BIGSMP
-	bool "Support for big SMP systems with more than 8 CPUs"
+config X86_VOYAGER
+	bool "Voyager (NCR)"
+	depends on SMP && !PCI && BROKEN
 	depends on X86_32_NON_STANDARD
 	help
-	  This option is needed for the systems that have more than 8 CPUs
-	  and if the system is not of any sub-arch type above.
+	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
+	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
+
+	  *** WARNING ***
+
+	  If you do not specifically know you have a Voyager based machine,
+	  say N here, otherwise the kernel you build will not be bootable.
 
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
-- 
cgit v1.2.3


From 0a1e8869f453ceda121a1ff8d6c4380832377be7 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 28 Jan 2009 23:21:25 +0300
Subject: x86: trampoline_64.S - use predefined constants with simplification

Impact: cleanup

We may use macros from processor-flags.h instead
of hardcoding bits. Actually it's not direct mapping
of old instructions with new ones -- BTS does change
CF flag while MOV does not. But i didn't find any
dependency on CF in this code.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/trampoline_64.S | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 894293c598d..95a012a4664 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -29,6 +29,7 @@
 #include <asm/page.h>
 #include <asm/msr.h>
 #include <asm/segment.h>
+#include <asm/processor-flags.h>
 
 .section .rodata, "a", @progbits
 
@@ -37,7 +38,7 @@
 ENTRY(trampoline_data)
 r_base = .
 	cli			# We should be safe anyway
-	wbinvd	
+	wbinvd
 	mov	%cs, %ax	# Code and data in the same place
 	mov	%ax, %ds
 	mov	%ax, %es
@@ -73,9 +74,8 @@ r_base = .
 	lidtl	tidt - r_base	# load idt with 0, 0
 	lgdtl	tgdt - r_base	# load gdt with whatever is appropriate
 
-	xor	%ax, %ax
-	inc	%ax		# protected mode (PE) bit
-	lmsw	%ax		# into protected mode
+	mov	$X86_CR0_PE, %ax	# protected mode (PE) bit
+	lmsw	%ax			# into protected mode
 
 	# flush prefetch and jump to startup_32
 	ljmpl	*(startup_32_vector - r_base)
@@ -86,9 +86,8 @@ startup_32:
 	movl	$__KERNEL_DS, %eax	# Initialize the %ds segment register
 	movl	%eax, %ds
 
-	xorl	%eax, %eax
-	btsl	$5, %eax		# Enable PAE mode
-	movl	%eax, %cr4
+	movl	$X86_CR4_PAE, %eax
+	movl	%eax, %cr4		# Enable PAE mode
 
 					# Setup trampoline 4 level pagetables
 	leal	(trampoline_level4_pgt - r_base)(%esi), %eax
@@ -99,9 +98,9 @@ startup_32:
 	xorl	%edx, %edx
 	wrmsr
 
-	xorl	%eax, %eax
-	btsl	$31, %eax		# Enable paging and in turn activate Long Mode
-	btsl	$0, %eax		# Enable protected mode
+	# Enable paging and in turn activate Long Mode
+	# Enable protected mode
+	movl	$(X86_CR0_PG | X86_CR0_PE), %eax
 	movl	%eax, %cr0
 
 	/*
-- 
cgit v1.2.3


From 010060741ad35eacb504414bc6fb9bb575b15f62 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Thu, 29 Jan 2009 16:02:12 +0100
Subject: x86: add might_sleep() to do_page_fault()

Impact: widen debug checks

VirtualBox calls do_page_fault() from an atomic context but runs into a
might_sleep() way pas this point, cure that.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 8f4b859a04b..eb4d7fe0593 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -888,6 +888,12 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 			return;
 		}
 		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in which
+		 * case we'll have missed the might_sleep() from down_read().
+		 */
+		might_sleep();
 	}
 
 	vma = find_vma(mm, address);
-- 
cgit v1.2.3


From fbeb2ca0224182033f196cf8f63989c3e6b90aba Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu, 29 Jan 2009 12:11:08 -0800
Subject: x86: unify genapic code, unify subarchitectures, remove old
 subarchitecture code, xapic fix

xapic fix for 32bit platform with less than 8 cpu's.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/probe_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index 61339a0d55c..b5db26f8e06 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -113,7 +113,7 @@ struct genapic apic_default = {
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= default_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= default_send_IPI_allbutself,
 	.send_IPI_all			= default_send_IPI_all,
 	.send_IPI_self			= NULL,
-- 
cgit v1.2.3


From 019a1369667c3978f9644982ebe6d261dd2bbc40 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Thu, 29 Jan 2009 11:49:18 -0800
Subject: x86: uaccess: fix compilation error on CONFIG_M386

In case of !CONFIG_X86_WP_WORKS_OK, __put_user_size_ex() is not defined.
Add macros for !CONFIG_X86_WP_WORKS_OK case.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess.h | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 0ec6de4bcb0..b9a24155f7a 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -525,8 +525,6 @@ struct __large_struct { unsigned long buf[100]; };
  */
 #define get_user_try		uaccess_try
 #define get_user_catch(err)	uaccess_catch(err)
-#define put_user_try		uaccess_try
-#define put_user_catch(err)	uaccess_catch(err)
 
 #define get_user_ex(x, ptr)	do {					\
 	unsigned long __gue_val;					\
@@ -534,9 +532,29 @@ struct __large_struct { unsigned long buf[100]; };
 	(x) = (__force __typeof__(*(ptr)))__gue_val;			\
 } while (0)
 
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+#define put_user_try		uaccess_try
+#define put_user_catch(err)	uaccess_catch(err)
+
 #define put_user_ex(x, ptr)						\
 	__put_user_size_ex((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
 
+#else /* !CONFIG_X86_WP_WORKS_OK */
+
+#define put_user_try		do {		\
+	int __uaccess_err = 0;
+
+#define put_user_catch(err)			\
+	(err) |= __uaccess_err;			\
+} while (0)
+
+#define put_user_ex(x, ptr)	do {		\
+	__uaccess_err |= __put_user(x, ptr);	\
+} while (0)
+
+#endif /* CONFIG_X86_WP_WORKS_OK */
+
 /*
  * movsl can be slow when source and dest are not both 8-byte aligned
  */
-- 
cgit v1.2.3


From 4272ebfbefd0db40073f3ee5990bceaf2894f08b Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Thu, 29 Jan 2009 15:14:46 -0800
Subject: x86: allow more than 8 cpus to be used on 32-bit

X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.

This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                  | 6 +-----
 arch/x86/configs/i386_defconfig   | 1 -
 arch/x86/configs/x86_64_defconfig | 1 -
 arch/x86/kernel/smpboot.c         | 2 +-
 4 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5bf0e0c5828..afaf2cb7c1a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -262,9 +262,6 @@ config X86_MPPARSE
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
 
-config X86_PC
-	def_bool y
-
 config X86_NON_STANDARD
 	bool "Support for non-standard x86 platforms"
 	help
@@ -1019,7 +1016,6 @@ config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
 	depends on SMP
 	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
-	default n if X86_PC
 	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
 	help
 	  Enable NUMA (Non Uniform Memory Access) support.
@@ -1122,7 +1118,7 @@ config ARCH_SPARSEMEM_DEFAULT
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
-	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_32_NON_STANDARD
+	depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
 	select SPARSEMEM_STATIC if X86_32
 	select SPARSEMEM_VMEMMAP_ENABLE if X86_64
 
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index edba00d98ac..739bce993b5 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -188,7 +188,6 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
-CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 322dd2748fc..02b514e8f4c 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -187,7 +187,6 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
-CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index fc80bc18943..2912fa3a8ef 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1000,7 +1000,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 {
 	preempt_disable();
 
-#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+#ifndef CONFIG_X86_BIGSMP
 	if (def_to_bigsmp && nr_cpu_ids > 8) {
 		unsigned int cpu;
 		unsigned nr;
-- 
cgit v1.2.3


From 754ef0cd65faac4840ada4362bda322d9a811fbf Mon Sep 17 00:00:00 2001
From: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Date: Wed, 28 Jan 2009 12:51:09 +0900
Subject: x86: fix debug message of CPU clock speed

Impact: Fixes incorrect printk

LOCAL APIC is corrected by PM-Timer, when SMI occurred while LOCAL APIC is calibrated.
In this case, LOCAL APIC debug message(Boot with apic=debug) is displayed correctly,
however, CPU clock speed debug message is displayed wrongly .

When SMI occured on my machine, which has 1.6GHz CPU, CPU clock speed is displayed
3622.0205 MHz as follow.

	CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
	Using local APIC timer interrupts.
	calibrating APIC timer ...
	... lapic delta = 3773130
	... PM timer delta = 812434
	APIC calibration not consistent with PM Timer: 226ms instead of 100ms
	APIC delta adjusted to PM-Timer: 1662420 (3773130)
	..... delta 1662420
	..... mult: 71411249
	..... calibration result: 265987
	..... CPU clock speed is 3622.0205 MHz.  =====>  here
	..... host bus clock speed is 265.0987 MHz.

This patch fixes to displaying CPU clock speed correctly as follow.

	CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
	Using local APIC timer interrupts.
	calibrating APIC timer ...
	... lapic delta = 3773131
	... PM timer delta = 812434
	APIC calibration not consistent with PM Timer: 226ms instead of 100ms
	APIC delta adjusted to PM-Timer: 1662420 (3773131)
	TSC delta adjusted to PM-Timer: 159592409 (362220564)
	..... delta 1662420
	..... mult: 71411249
	..... calibration result: 265987
	..... CPU clock speed is 1595.0924 MHz.
	..... host bus clock speed is 265.0987 MHz.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/apic.c | 47 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 4b6df2469fe..7bcd746d704 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -535,7 +535,8 @@ static void __init lapic_cal_handler(struct clock_event_device *dev)
 	}
 }
 
-static int __init calibrate_by_pmtimer(long deltapm, long *delta)
+static int __init
+calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
 {
 	const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
 	const long pm_thresh = pm_100ms / 100;
@@ -557,18 +558,29 @@ static int __init calibrate_by_pmtimer(long deltapm, long *delta)
 	if (deltapm > (pm_100ms - pm_thresh) &&
 	    deltapm < (pm_100ms + pm_thresh)) {
 		apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
-	} else {
-		res = (((u64)deltapm) *  mult) >> 22;
-		do_div(res, 1000000);
-		pr_warning("APIC calibration not consistent "
-			"with PM Timer: %ldms instead of 100ms\n",
-			(long)res);
-		/* Correct the lapic counter value */
-		res = (((u64)(*delta)) * pm_100ms);
+		return 0;
+	}
+
+	res = (((u64)deltapm) *  mult) >> 22;
+	do_div(res, 1000000);
+	pr_warning("APIC calibration not consistent "
+		   "with PM Timer: %ldms instead of 100ms\n",(long)res);
+
+	/* Correct the lapic counter value */
+	res = (((u64)(*delta)) * pm_100ms);
+	do_div(res, deltapm);
+	pr_info("APIC delta adjusted to PM-Timer: "
+		"%lu (%ld)\n", (unsigned long)res, *delta);
+	*delta = (long)res;
+
+	/* Correct the tsc counter value */
+	if (cpu_has_tsc) {
+		res = (((u64)(*deltatsc)) * pm_100ms);
 		do_div(res, deltapm);
-		pr_info("APIC delta adjusted to PM-Timer: "
-			"%lu (%ld)\n", (unsigned long)res, *delta);
-		*delta = (long)res;
+		apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
+					  "PM-Timer: %lu (%ld) \n",
+					(unsigned long)res, *deltatsc);
+		*deltatsc = (long)res;
 	}
 
 	return 0;
@@ -579,7 +591,7 @@ static int __init calibrate_APIC_clock(void)
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 	void (*real_handler)(struct clock_event_device *dev);
 	unsigned long deltaj;
-	long delta;
+	long delta, deltatsc;
 	int pm_referenced = 0;
 
 	local_irq_disable();
@@ -609,9 +621,11 @@ static int __init calibrate_APIC_clock(void)
 	delta = lapic_cal_t1 - lapic_cal_t2;
 	apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
 
+	deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
+
 	/* we trust the PM based calibration if possible */
 	pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
-					&delta);
+					&delta, &deltatsc);
 
 	/* Calculate the scaled math multiplication factor */
 	lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
@@ -629,11 +643,10 @@ static int __init calibrate_APIC_clock(void)
 		    calibration_result);
 
 	if (cpu_has_tsc) {
-		delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
 		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
 			    "%ld.%04ld MHz.\n",
-			    (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
-			    (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+			    (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+			    (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
 	}
 
 	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
-- 
cgit v1.2.3


From 39ba5d43fc9133696240fc8b6b13e7a41fea87cd Mon Sep 17 00:00:00 2001
From: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Date: Wed, 28 Jan 2009 12:52:24 +0900
Subject: x86: unify PM-Timer messages

Impact: Cleans up printk formatting

When LOCAL APIC was calibrated, the debug message is displayed as follows.

	CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
	Using local APIC timer interrupts.
	calibrating APIC timer ...
	... lapic delta = 3773131
	... PM timer delta = 812434
	APIC calibration not consistent with PM Timer: 226ms instead of 100ms
	APIC delta adjusted to PM-Timer: 1662420 (3773131)
	TSC delta adjusted to PM-Timer: 159592409 (362220564)
	..... delta 1662420
	..... mult: 71411249
	..... calibration result: 265987
	..... CPU clock speed is 1595.0924 MHz.
	..... host bus clock speed is 265.0987 MHz.

There are three type of PM-Timer (PM-Timer, PM Timer, and PM timer),
in this message. This patch unifies those messages to PM-Timer.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/apic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 7bcd746d704..0d935d218d0 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -547,7 +547,7 @@ calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
 	return -1;
 #endif
 
-	apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
+	apic_printk(APIC_VERBOSE, "... PM-Timer delta = %ld\n", deltapm);
 
 	/* Check, if the PM timer is available */
 	if (!deltapm)
@@ -557,14 +557,14 @@ calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
 
 	if (deltapm > (pm_100ms - pm_thresh) &&
 	    deltapm < (pm_100ms + pm_thresh)) {
-		apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
+		apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
 		return 0;
 	}
 
 	res = (((u64)deltapm) *  mult) >> 22;
 	do_div(res, 1000000);
 	pr_warning("APIC calibration not consistent "
-		   "with PM Timer: %ldms instead of 100ms\n",(long)res);
+		   "with PM-Timer: %ldms instead of 100ms\n",(long)res);
 
 	/* Correct the lapic counter value */
 	res = (((u64)(*delta)) * pm_100ms);
-- 
cgit v1.2.3


From 36ef4944ee8118491631e317e406f9bd15e20e97 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Thu, 29 Jan 2009 19:29:24 -0800
Subject: x86, apic unification: remove left over files

Impact: cleanup

remove unused files

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/bigsmp/apic.h    | 138 ----------------------------------
 arch/x86/include/asm/bigsmp/apicdef.h |   9 ---
 arch/x86/include/asm/bigsmp/ipi.h     |  22 ------
 arch/x86/mach-default/Makefile        |   5 --
 4 files changed, 174 deletions(-)
 delete mode 100644 arch/x86/include/asm/bigsmp/apic.h
 delete mode 100644 arch/x86/include/asm/bigsmp/apicdef.h
 delete mode 100644 arch/x86/include/asm/bigsmp/ipi.h
 delete mode 100644 arch/x86/mach-default/Makefile

(limited to 'arch')

diff --git a/arch/x86/include/asm/bigsmp/apic.h b/arch/x86/include/asm/bigsmp/apic.h
deleted file mode 100644
index ee29d66cd30..00000000000
--- a/arch/x86/include/asm/bigsmp/apic.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-
-static inline int bigsmp_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline const cpumask_t *bigsmp_target_cpus(void)
-{
-#ifdef CONFIG_SMP
-	return &cpu_online_map;
-#else
-	return &cpumask_of_cpu(0);
-#endif
-}
-
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-
-static inline unsigned long
-bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-static inline unsigned long bigsmp_check_apicid_present(int bit)
-{
-	return 1;
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long val, id;
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = xapic_phys_to_log_apicid(cpu);
-	val |= SET_APIC_LOGICAL_ID(id);
-	return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void bigsmp_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void bigsmp_setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"Physflat", nr_ioapics);
-}
-
-static inline int bigsmp_apicid_to_node(int logical_apicid)
-{
-	return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
-	return BAD_APICID;
-}
-
-static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int bigsmp_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
-}
-
-static inline void bigsmp_setup_portio_remap(void)
-{
-}
-
-static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
-}
-
-static inline unsigned int
-bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			      const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-	if (cpu < nr_cpu_ids)
-		return bigsmp_cpu_to_logical_apicid(cpu);
-
-	return BAD_APICID;
-}
-
-static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
diff --git a/arch/x86/include/asm/bigsmp/apicdef.h b/arch/x86/include/asm/bigsmp/apicdef.h
deleted file mode 100644
index e58dee84757..00000000000
--- a/arch/x86/include/asm/bigsmp/apicdef.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-static inline unsigned bigsmp_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-#endif
diff --git a/arch/x86/include/asm/bigsmp/ipi.h b/arch/x86/include/asm/bigsmp/ipi.h
deleted file mode 100644
index a91db69cda6..00000000000
--- a/arch/x86/include/asm/bigsmp/ipi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void bigsmp_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void bigsmp_send_IPI_all(int vector)
-{
-	default_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
diff --git a/arch/x86/mach-default/Makefile b/arch/x86/mach-default/Makefile
deleted file mode 100644
index 012fe34459e..00000000000
--- a/arch/x86/mach-default/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o
-- 
cgit v1.2.3


From 1ff2f20de354a621ef4b56b9cfe6f9139a7e493b Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Thu, 29 Jan 2009 19:30:04 -0800
Subject: x86: fix compiling with 64bit with def_to_bigsmp

only need to do cut off with 32bit

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/smpboot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2912fa3a8ef..4c3cff57494 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1000,7 +1000,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 {
 	preempt_disable();
 
-#ifndef CONFIG_X86_BIGSMP
+#if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
 	if (def_to_bigsmp && nr_cpu_ids > 8) {
 		unsigned int cpu;
 		unsigned nr;
-- 
cgit v1.2.3


From 43f39890db2959b10891cf7bbf3f53fffc8ce3bd Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Thu, 29 Jan 2009 19:31:49 -0800
Subject: x86: seperate default_send_IPI_mask_sequence/allbutself from logical

Impact: 32-bit should use logical version

there are two version: for default_send_IPI_mask_sequence/allbutself
one in ipi.h and one in ipi.c for 32bit

it seems .h version overwrote ipi.c for a while.

restore it so 32 bit could use its old logical version.
also remove dupicated functions in .c

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/ipi.h        |  71 ++++++++++++++++---
 arch/x86/kernel/bigsmp_32.c       |   8 +--
 arch/x86/kernel/es7000_32.c       |   4 +-
 arch/x86/kernel/genapic_flat_64.c |   6 +-
 arch/x86/kernel/ipi.c             | 139 +-------------------------------------
 arch/x86/kernel/numaq_32.c        |   8 +--
 arch/x86/kernel/probe_32.c        |   4 +-
 arch/x86/kernel/summit_32.c       |   6 +-
 8 files changed, 77 insertions(+), 169 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index e2e8e4e0a65..aa79945445b 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -120,7 +120,7 @@ static inline void
 }
 
 static inline void
-default_send_IPI_mask_sequence(const struct cpumask *mask, int vector)
+default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
 {
 	unsigned long query_cpu;
 	unsigned long flags;
@@ -139,7 +139,7 @@ default_send_IPI_mask_sequence(const struct cpumask *mask, int vector)
 }
 
 static inline void
-default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
+default_send_IPI_mask_allbutself_phys(const struct cpumask *mask, int vector)
 {
 	unsigned int this_cpu = smp_processor_id();
 	unsigned int query_cpu;
@@ -157,23 +157,72 @@ default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
 	local_irq_restore(flags);
 }
 
+#include <asm/genapic.h>
+
+static inline void
+default_send_IPI_mask_sequence_logical(const struct cpumask *mask, int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
+	 * should be modified to do 1 message per cluster ID - mbligh
+	 */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask)
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector,
+			apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+static inline void
+default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+	unsigned int this_cpu = smp_processor_id();
+
+	/* See Hack comment above */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector,
+			apic->dest_logical);
+		}
+	local_irq_restore(flags);
+}
 
 /* Avoid include hell */
 #define NMI_VECTOR 0x02
 
-void default_send_IPI_mask_bitmask(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
 extern int no_broadcast;
 
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#else
-static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
+#ifndef CONFIG_X86_64
+/*
+ * This is only used on smaller machines.
+ */
+static inline void default_send_IPI_mask_bitmask_logical(const struct cpumask *cpumask, int vector)
+{
+	unsigned long mask = cpumask_bits(cpumask)[0];
+	unsigned long flags;
+
+	local_irq_save(flags);
+	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
+	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+static inline void default_send_IPI_mask_logical(const struct cpumask *mask, int vector)
 {
-	default_send_IPI_mask_bitmask(mask, vector);
+	default_send_IPI_mask_bitmask_logical(mask, vector);
 }
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
 #endif
 
 static inline void __default_local_send_IPI_allbutself(int vector)
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index b1f91931003..ab645c93a6e 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -9,6 +9,7 @@
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
+#include <asm/ipi.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
@@ -154,17 +155,14 @@ static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
 static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	default_send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence_phys(mask, vector);
 }
 
 static inline void bigsmp_send_IPI_allbutself(int vector)
 {
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
 }
 
 static inline void bigsmp_send_IPI_all(int vector)
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 078364ccfa0..b5b50e8b94a 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -451,12 +451,12 @@ static int es7000_check_dsdt(void)
 
 static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	default_send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence_phys(mask, vector);
 }
 
 static void es7000_send_IPI_allbutself(int vector)
 {
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
 }
 
 static void es7000_send_IPI_all(int vector)
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 19bffb3f732..249d2d3c034 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -267,18 +267,18 @@ static void physflat_vector_allocation_domain(int cpu, struct cpumask *retmask)
 
 static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
 {
-	default_send_IPI_mask_sequence(cpumask, vector);
+	default_send_IPI_mask_sequence_phys(cpumask, vector);
 }
 
 static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
 					      int vector)
 {
-	default_send_IPI_mask_allbutself(cpumask, vector);
+	default_send_IPI_mask_allbutself_phys(cpumask, vector);
 }
 
 static void physflat_send_IPI_allbutself(int vector)
 {
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
 }
 
 static void physflat_send_IPI_all(int vector)
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 0893fa14458..339f4f3feee 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -17,148 +17,13 @@
 #include <asm/mmu_context.h>
 #include <asm/apic.h>
 #include <asm/proto.h>
+#include <asm/ipi.h>
 
 #ifdef CONFIG_X86_32
-#include <asm/genapic.h>
-
-/*
- * the following functions deal with sending IPIs between CPUs.
- *
- * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
- */
-
-static inline int __prepare_ICR(unsigned int shortcut, int vector)
-{
-	unsigned int icr = shortcut | apic->dest_logical;
-
-	switch (vector) {
-	default:
-		icr |= APIC_DM_FIXED | vector;
-		break;
-	case NMI_VECTOR:
-		icr |= APIC_DM_NMI;
-		break;
-	}
-	return icr;
-}
-
-static inline int __prepare_ICR2(unsigned int mask)
-{
-	return SET_APIC_DEST_FIELD(mask);
-}
-
-void __default_send_IPI_shortcut(unsigned int shortcut, int vector)
-{
-	/*
-	 * Subtle. In the case of the 'never do double writes' workaround
-	 * we have to lock out interrupts to be safe.  As we don't care
-	 * of the value read we use an atomic rmw access to avoid costly
-	 * cli/sti.  Otherwise we use an even cheaper single atomic write
-	 * to the APIC.
-	 */
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	/*
-	 * No need to touch the target chip field
-	 */
-	cfg = __prepare_ICR(shortcut, vector);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write(APIC_ICR, cfg);
-}
 
 void default_send_IPI_self(int vector)
 {
-	__default_send_IPI_shortcut(APIC_DEST_SELF, vector);
-}
-
-/*
- * This is used to send an IPI with no shorthand notation (the destination is
- * specified in bits 56 to 63 of the ICR).
- */
-static inline void __default_send_IPI_dest_field(unsigned long mask, int vector)
-{
-	unsigned long cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	if (unlikely(vector == NMI_VECTOR))
-		safe_apic_wait_icr_idle();
-	else
-		apic_wait_icr_idle();
-
-	/*
-	 * prepare target chip field
-	 */
-	cfg = __prepare_ICR2(mask);
-	apic_write(APIC_ICR2, cfg);
-
-	/*
-	 * program the ICR
-	 */
-	cfg = __prepare_ICR(0, vector);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write(APIC_ICR, cfg);
-}
-
-/*
- * This is only used on smaller machines.
- */
-void default_send_IPI_mask_bitmask(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-	unsigned long flags;
-
-	local_irq_save(flags);
-	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
-	__default_send_IPI_dest_field(mask, vector);
-	local_irq_restore(flags);
-}
-
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
-	 * should be modified to do 1 message per cluster ID - mbligh
-	 */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		__default_send_IPI_dest_field(apic->cpu_to_logical_apicid(query_cpu), vector);
-	local_irq_restore(flags);
-}
-
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-	unsigned int this_cpu = smp_processor_id();
-
-	/* See Hack comment above */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__default_send_IPI_dest_field(
-			apic->cpu_to_logical_apicid(query_cpu), vector);
-	}
-	local_irq_restore(flags);
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, apic->dest_logical);
 }
 
 /* must come after the send_IPI functions above for inlining */
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 83bb05524f4..c143b329216 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -302,6 +302,7 @@ int __init get_memcfg_numaq(void)
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
+#include <asm/ipi.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -319,17 +320,14 @@ static inline unsigned int numaq_get_apic_id(unsigned long x)
 	return (x >> 24) & 0x0F;
 }
 
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
 static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
 {
-	default_send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence_logical(mask, vector);
 }
 
 static inline void numaq_send_IPI_allbutself(int vector)
 {
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
+	default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
 }
 
 static inline void numaq_send_IPI_all(int vector)
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index b5db26f8e06..3f12a401182 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -112,8 +112,8 @@ struct genapic apic_default = {
 	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= default_send_IPI_mask,
-	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself,
+	.send_IPI_mask			= default_send_IPI_mask_logical,
+	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
 	.send_IPI_allbutself		= default_send_IPI_allbutself,
 	.send_IPI_all			= default_send_IPI_all,
 	.send_IPI_self			= NULL,
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 84ff9ebbcc9..ecb41b9d7aa 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -43,6 +43,7 @@
 #include <asm/genapic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
+#include <asm/ipi.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -54,12 +55,9 @@ static inline unsigned summit_get_apic_id(unsigned long x)
 	return (x >> 24) & 0xFF;
 }
 
-void default_send_IPI_mask_sequence(const cpumask_t *mask, int vector);
-void default_send_IPI_mask_allbutself(const cpumask_t *mask, int vector);
-
 static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
 {
-	default_send_IPI_mask_sequence(mask, vector);
+	default_send_IPI_mask_sequence_logical(mask, vector);
 }
 
 static inline void summit_send_IPI_allbutself(int vector)
-- 
cgit v1.2.3


From 26f7ef14a76b0e590a3797fd7b2f3cee868d9664 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Thu, 29 Jan 2009 14:19:22 -0800
Subject: x86: don't treat bigsmp as non-standard

just like 64 bit switch from flat logical APIC messages to
flat physical mode automatically.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig            | 15 +++++++--------
 arch/x86/kernel/acpi/boot.c |  2 +-
 arch/x86/kernel/mpparse.c   |  4 ++--
 arch/x86/kernel/setup.c     |  2 +-
 arch/x86/kernel/smpboot.c   |  2 +-
 5 files changed, 12 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index afaf2cb7c1a..c6e567bb649 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -262,6 +262,12 @@ config X86_MPPARSE
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
 
+config X86_BIGSMP
+	bool "Support for big SMP systems with more than 8 CPUs"
+	depends on X86_32 && SMP
+	help
+	  This option is needed for the systems that have more than 8 CPUs
+
 config X86_NON_STANDARD
 	bool "Support for non-standard x86 platforms"
 	help
@@ -338,13 +344,6 @@ config X86_32_NON_STANDARD
 	  if you select them all, kernel will probe it one by one. and will
 	  fallback to default.
 
-config X86_BIGSMP
-	bool "Support for big SMP systems with more than 8 CPUs"
-	depends on X86_32_NON_STANDARD
-	help
-	  This option is needed for the systems that have more than 8 CPUs
-	  and if the system is not of any sub-arch type above.
-
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
 	depends on X86_32_NON_STANDARD
@@ -366,7 +365,7 @@ config X86_SUMMIT
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
-	depends on X86_32_NON_STANDARD
+	depends on X86_32_NON_STANDARD && X86_BIGSMP
 	help
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 7352c60f29d..3efa996b036 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1335,7 +1335,7 @@ static void __init acpi_process_madt(void)
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_32_NON_STANDARD
+#ifdef CONFIG_X86_BIGSMP
 			generic_bigsmp_probe();
 #endif
 			/*
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 89aaced51bd..b46ca7d31fe 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -372,8 +372,8 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 			(*x86_quirks->mpc_record)++;
 	}
 
-#ifdef CONFIG_X86_32_NON_STANDARD
-       generic_bigsmp_probe();
+#ifdef CONFIG_X86_BIGSMP
+	generic_bigsmp_probe();
 #endif
 
 	if (apic->setup_apic_routing)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f64e1a487c9..df64afff580 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -936,7 +936,7 @@ void __init setup_arch(char **cmdline_p)
 	map_vsyscall();
 #endif
 
-#ifdef CONFIG_X86_32_NON_STANDARD
+#if defined(CONFIG_X86_32_NON_STANDARD) || defined(CONFIG_X86_BIGSMP)
 	generic_apic_probe();
 #endif
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 4c3cff57494..1268a862abb 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1007,7 +1007,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 
 		printk(KERN_WARNING
 		       "More than 8 CPUs detected - skipping them.\n"
-		       "Use CONFIG_X86_32_NON_STANDARD and CONFIG_X86_BIGSMP.\n");
+		       "Use CONFIG_X86_BIGSMP.\n");
 
 		nr = 0;
 		for_each_present_cpu(cpu) {
-- 
cgit v1.2.3


From 4d87c5bec5389625d80b71108795aecf82cd670d Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 29 Jan 2009 14:29:10 -0800
Subject: fix "sparseirq: use kstat_irqs_cpu on non-x86 architectures too"

Repair 0b0f0b1c2c87de299df6f92a8ffc0a73bd1bb960

arch/alpha/kernel/irq.c: In function 'show_interrupts':
arch/alpha/kernel/irq.c:93: error: 'i' undeclared (first use in this function)
arch/alpha/kernel/irq.c:93: error: (Each undeclared identifier is reported only once
arch/alpha/kernel/irq.c:93: error: for each function it appears in.)

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/alpha/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 430550bd1eb..d3812eb8401 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -90,7 +90,7 @@ show_interrupts(struct seq_file *p, void *v)
 		seq_printf(p, "%10u ", kstat_irqs(irq));
 #else
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+			seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
 #endif
 		seq_printf(p, " %14s", irq_desc[irq].chip->typename);
 		seq_printf(p, "  %c%s",
-- 
cgit v1.2.3


From 6b64ee02da20d6c0d97115e0b1ab47f9fa2f0d8f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 30 Jan 2009 23:42:18 +0100
Subject: x86, apic, 32-bit: add self-IPI methods

Impact: fix rare crash on 32-bit

The 32-bit APIC drivers had their send_IPI_self vectors set to NULL,
but ioapic_retrigger_irq() depends on it being always set. Fix it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/bigsmp_32.c | 2 +-
 arch/x86/kernel/es7000_32.c | 2 +-
 arch/x86/kernel/numaq_32.c  | 2 +-
 arch/x86/kernel/probe_32.c  | 2 +-
 arch/x86/kernel/summit_32.c | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index ab645c93a6e..47a62f46afd 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -252,7 +252,7 @@ struct genapic apic_bigsmp = {
 	.send_IPI_mask_allbutself	= NULL,
 	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
 	.send_IPI_all			= bigsmp_send_IPI_all,
-	.send_IPI_self			= NULL,
+	.send_IPI_self			= default_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index b5b50e8b94a..d6184c12a18 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -786,7 +786,7 @@ struct genapic apic_es7000 = {
 	.send_IPI_mask_allbutself	= NULL,
 	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
 	.send_IPI_all			= es7000_send_IPI_all,
-	.send_IPI_self			= NULL,
+	.send_IPI_self			= default_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
 
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index c143b329216..947748e1721 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -554,7 +554,7 @@ struct genapic apic_numaq = {
 	.send_IPI_mask_allbutself	= NULL,
 	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
 	.send_IPI_all			= numaq_send_IPI_all,
-	.send_IPI_self			= NULL,
+	.send_IPI_self			= default_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index 3f12a401182..22337b75de6 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -116,7 +116,7 @@ struct genapic apic_default = {
 	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
 	.send_IPI_allbutself		= default_send_IPI_allbutself,
 	.send_IPI_all			= default_send_IPI_all,
-	.send_IPI_self			= NULL,
+	.send_IPI_self			= default_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index ecb41b9d7aa..1e733eff9b3 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -588,7 +588,7 @@ struct genapic apic_summit = {
 	.send_IPI_mask_allbutself	= NULL,
 	.send_IPI_allbutself		= summit_send_IPI_allbutself,
 	.send_IPI_all			= summit_send_IPI_all,
-	.send_IPI_self			= NULL,
+	.send_IPI_self			= default_send_IPI_self,
 
 	.wakeup_cpu			= NULL,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-- 
cgit v1.2.3


From 319f3ba52c71630865b10ac3b99dd020440d681d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:01 -0800
Subject: xen: move remaining mmu-related stuff into mmu.c

Impact: Cleanup

Move remaining mmu-related stuff into mmu.c.
A general cleanup, and lay the groundwork for later patches.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/xen/enlighten.c | 731 +----------------------------------------------
 arch/x86/xen/mmu.c       | 700 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/mmu.h       |   3 +
 arch/x86/xen/xen-ops.h   |   8 +
 4 files changed, 712 insertions(+), 730 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 6b3f7eef57e..0cd2a165f17 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -61,35 +61,6 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 enum xen_domain_type xen_domain_type = XEN_NATIVE;
 EXPORT_SYMBOL_GPL(xen_domain_type);
 
-/*
- * Identity map, in addition to plain kernel map.  This needs to be
- * large enough to allocate page table pages to allocate the rest.
- * Each page can map 2MB.
- */
-static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
-
-#ifdef CONFIG_X86_64
-/* l3 pud for userspace vsyscall mapping */
-static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
-#endif /* CONFIG_X86_64 */
-
-/*
- * Note about cr3 (pagetable base) values:
- *
- * xen_cr3 contains the current logical cr3 value; it contains the
- * last set cr3.  This may not be the current effective cr3, because
- * its update may be being lazily deferred.  However, a vcpu looking
- * at its own cr3 can use this value knowing that it everything will
- * be self-consistent.
- *
- * xen_current_cr3 contains the actual vcpu cr3; it is set once the
- * hypercall to set the vcpu cr3 is complete (so it may be a little
- * out of date, but it will never be set early).  If one vcpu is
- * looking at another vcpu's cr3 value, it should use this variable.
- */
-DEFINE_PER_CPU(unsigned long, xen_cr3);	 /* cr3 stored as physaddr */
-DEFINE_PER_CPU(unsigned long, xen_current_cr3);	 /* actual vcpu cr3 */
-
 struct start_info *xen_start_info;
 EXPORT_SYMBOL_GPL(xen_start_info);
 
@@ -237,7 +208,7 @@ static unsigned long xen_get_debugreg(int reg)
 	return HYPERVISOR_get_debugreg(reg);
 }
 
-static void xen_leave_lazy(void)
+void xen_leave_lazy(void)
 {
 	paravirt_leave_lazy(paravirt_get_lazy_mode());
 	xen_mc_flush();
@@ -598,76 +569,6 @@ static struct apic_ops xen_basic_apic_ops = {
 
 #endif
 
-static void xen_flush_tlb(void)
-{
-	struct mmuext_op *op;
-	struct multicall_space mcs;
-
-	preempt_disable();
-
-	mcs = xen_mc_entry(sizeof(*op));
-
-	op = mcs.args;
-	op->cmd = MMUEXT_TLB_FLUSH_LOCAL;
-	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
-
-	xen_mc_issue(PARAVIRT_LAZY_MMU);
-
-	preempt_enable();
-}
-
-static void xen_flush_tlb_single(unsigned long addr)
-{
-	struct mmuext_op *op;
-	struct multicall_space mcs;
-
-	preempt_disable();
-
-	mcs = xen_mc_entry(sizeof(*op));
-	op = mcs.args;
-	op->cmd = MMUEXT_INVLPG_LOCAL;
-	op->arg1.linear_addr = addr & PAGE_MASK;
-	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
-
-	xen_mc_issue(PARAVIRT_LAZY_MMU);
-
-	preempt_enable();
-}
-
-static void xen_flush_tlb_others(const struct cpumask *cpus,
-				 struct mm_struct *mm, unsigned long va)
-{
-	struct {
-		struct mmuext_op op;
-		DECLARE_BITMAP(mask, NR_CPUS);
-	} *args;
-	struct multicall_space mcs;
-
-	BUG_ON(cpumask_empty(cpus));
-	BUG_ON(!mm);
-
-	mcs = xen_mc_entry(sizeof(*args));
-	args = mcs.args;
-	args->op.arg2.vcpumask = to_cpumask(args->mask);
-
-	/* Remove us, and any offline CPUS. */
-	cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
-	if (unlikely(cpumask_empty(to_cpumask(args->mask))))
-		goto issue;
-
-	if (va == TLB_FLUSH_ALL) {
-		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
-	} else {
-		args->op.cmd = MMUEXT_INVLPG_MULTI;
-		args->op.arg1.linear_addr = va;
-	}
-
-	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
-
-issue:
-	xen_mc_issue(PARAVIRT_LAZY_MMU);
-}
 
 static void xen_clts(void)
 {
@@ -693,21 +594,6 @@ static void xen_write_cr0(unsigned long cr0)
 	xen_mc_issue(PARAVIRT_LAZY_CPU);
 }
 
-static void xen_write_cr2(unsigned long cr2)
-{
-	percpu_read(xen_vcpu)->arch.cr2 = cr2;
-}
-
-static unsigned long xen_read_cr2(void)
-{
-	return percpu_read(xen_vcpu)->arch.cr2;
-}
-
-static unsigned long xen_read_cr2_direct(void)
-{
-	return percpu_read(xen_vcpu_info.arch.cr2);
-}
-
 static void xen_write_cr4(unsigned long cr4)
 {
 	cr4 &= ~X86_CR4_PGE;
@@ -716,71 +602,6 @@ static void xen_write_cr4(unsigned long cr4)
 	native_write_cr4(cr4);
 }
 
-static unsigned long xen_read_cr3(void)
-{
-	return percpu_read(xen_cr3);
-}
-
-static void set_current_cr3(void *v)
-{
-	percpu_write(xen_current_cr3, (unsigned long)v);
-}
-
-static void __xen_write_cr3(bool kernel, unsigned long cr3)
-{
-	struct mmuext_op *op;
-	struct multicall_space mcs;
-	unsigned long mfn;
-
-	if (cr3)
-		mfn = pfn_to_mfn(PFN_DOWN(cr3));
-	else
-		mfn = 0;
-
-	WARN_ON(mfn == 0 && kernel);
-
-	mcs = __xen_mc_entry(sizeof(*op));
-
-	op = mcs.args;
-	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
-	op->arg1.mfn = mfn;
-
-	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
-
-	if (kernel) {
-		percpu_write(xen_cr3, cr3);
-
-		/* Update xen_current_cr3 once the batch has actually
-		   been submitted. */
-		xen_mc_callback(set_current_cr3, (void *)cr3);
-	}
-}
-
-static void xen_write_cr3(unsigned long cr3)
-{
-	BUG_ON(preemptible());
-
-	xen_mc_batch();  /* disables interrupts */
-
-	/* Update while interrupts are disabled, so its atomic with
-	   respect to ipis */
-	percpu_write(xen_cr3, cr3);
-
-	__xen_write_cr3(true, cr3);
-
-#ifdef CONFIG_X86_64
-	{
-		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
-		if (user_pgd)
-			__xen_write_cr3(false, __pa(user_pgd));
-		else
-			__xen_write_cr3(false, 0);
-	}
-#endif
-
-	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
-}
-
 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 {
 	int ret;
@@ -822,185 +643,6 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 	return ret;
 }
 
-/* Early in boot, while setting up the initial pagetable, assume
-   everything is pinned. */
-static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
-{
-#ifdef CONFIG_FLATMEM
-	BUG_ON(mem_map);	/* should only be used early */
-#endif
-	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
-}
-
-/* Early release_pte assumes that all pts are pinned, since there's
-   only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
-{
-	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
-}
-
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
-{
-	struct mmuext_op op;
-	op.cmd = cmd;
-	op.arg1.mfn = pfn_to_mfn(pfn);
-	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
-		BUG();
-}
-
-/* This needs to make sure the new pte page is pinned iff its being
-   attached to a pinned pagetable. */
-static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level)
-{
-	struct page *page = pfn_to_page(pfn);
-
-	if (PagePinned(virt_to_page(mm->pgd))) {
-		SetPagePinned(page);
-
-		vm_unmap_aliases();
-		if (!PageHighMem(page)) {
-			make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
-			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
-				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
-		} else {
-			/* make sure there are no stray mappings of
-			   this page */
-			kmap_flush_unused();
-		}
-	}
-}
-
-static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn)
-{
-	xen_alloc_ptpage(mm, pfn, PT_PTE);
-}
-
-static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
-{
-	xen_alloc_ptpage(mm, pfn, PT_PMD);
-}
-
-static int xen_pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *pgd = mm->pgd;
-	int ret = 0;
-
-	BUG_ON(PagePinned(virt_to_page(pgd)));
-
-#ifdef CONFIG_X86_64
-	{
-		struct page *page = virt_to_page(pgd);
-		pgd_t *user_pgd;
-
-		BUG_ON(page->private != 0);
-
-		ret = -ENOMEM;
-
-		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-		page->private = (unsigned long)user_pgd;
-
-		if (user_pgd != NULL) {
-			user_pgd[pgd_index(VSYSCALL_START)] =
-				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
-			ret = 0;
-		}
-
-		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
-	}
-#endif
-
-	return ret;
-}
-
-static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-#ifdef CONFIG_X86_64
-	pgd_t *user_pgd = xen_get_user_pgd(pgd);
-
-	if (user_pgd)
-		free_page((unsigned long)user_pgd);
-#endif
-}
-
-/* This should never happen until we're OK to use struct page */
-static void xen_release_ptpage(unsigned long pfn, unsigned level)
-{
-	struct page *page = pfn_to_page(pfn);
-
-	if (PagePinned(page)) {
-		if (!PageHighMem(page)) {
-			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
-				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
-			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
-		}
-		ClearPagePinned(page);
-	}
-}
-
-static void xen_release_pte(unsigned long pfn)
-{
-	xen_release_ptpage(pfn, PT_PTE);
-}
-
-static void xen_release_pmd(unsigned long pfn)
-{
-	xen_release_ptpage(pfn, PT_PMD);
-}
-
-#if PAGETABLE_LEVELS == 4
-static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
-{
-	xen_alloc_ptpage(mm, pfn, PT_PUD);
-}
-
-static void xen_release_pud(unsigned long pfn)
-{
-	xen_release_ptpage(pfn, PT_PUD);
-}
-#endif
-
-#ifdef CONFIG_HIGHPTE
-static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
-{
-	pgprot_t prot = PAGE_KERNEL;
-
-	if (PagePinned(page))
-		prot = PAGE_KERNEL_RO;
-
-	if (0 && PageHighMem(page))
-		printk("mapping highpte %lx type %d prot %s\n",
-		       page_to_pfn(page), type,
-		       (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ");
-
-	return kmap_atomic_prot(page, type, prot);
-}
-#endif
-
-#ifdef CONFIG_X86_32
-static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
-{
-	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
-	if (pte_val_ma(*ptep) & _PAGE_PRESENT)
-		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
-			       pte_val_ma(pte));
-
-	return pte;
-}
-
-/* Init-time set_pte while constructing initial pagetables, which
-   doesn't allow RO pagetable pages to be remapped RW */
-static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
-{
-	pte = mask_rw_pte(ptep, pte);
-
-	xen_set_pte(ptep, pte);
-}
-#endif
-
-static __init void xen_pagetable_setup_start(pgd_t *base)
-{
-}
-
 void xen_setup_shared_info(void)
 {
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
@@ -1021,37 +663,6 @@ void xen_setup_shared_info(void)
 	xen_setup_mfn_list_list();
 }
 
-static __init void xen_pagetable_setup_done(pgd_t *base)
-{
-	xen_setup_shared_info();
-}
-
-static __init void xen_post_allocator_init(void)
-{
-	pv_mmu_ops.set_pte = xen_set_pte;
-	pv_mmu_ops.set_pmd = xen_set_pmd;
-	pv_mmu_ops.set_pud = xen_set_pud;
-#if PAGETABLE_LEVELS == 4
-	pv_mmu_ops.set_pgd = xen_set_pgd;
-#endif
-
-	/* This will work as long as patching hasn't happened yet
-	   (which it hasn't) */
-	pv_mmu_ops.alloc_pte = xen_alloc_pte;
-	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
-	pv_mmu_ops.release_pte = xen_release_pte;
-	pv_mmu_ops.release_pmd = xen_release_pmd;
-#if PAGETABLE_LEVELS == 4
-	pv_mmu_ops.alloc_pud = xen_alloc_pud;
-	pv_mmu_ops.release_pud = xen_release_pud;
-#endif
-
-#ifdef CONFIG_X86_64
-	SetPagePinned(virt_to_page(level3_user_vsyscall));
-#endif
-	xen_mark_init_mm_pinned();
-}
-
 /* This is called once we have the cpu_possible_map */
 void xen_setup_vcpu_info_placement(void)
 {
@@ -1126,49 +737,6 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	return ret;
 }
 
-static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
-{
-	pte_t pte;
-
-	phys >>= PAGE_SHIFT;
-
-	switch (idx) {
-	case FIX_BTMAP_END ... FIX_BTMAP_BEGIN:
-#ifdef CONFIG_X86_F00F_BUG
-	case FIX_F00F_IDT:
-#endif
-#ifdef CONFIG_X86_32
-	case FIX_WP_TEST:
-	case FIX_VDSO:
-# ifdef CONFIG_HIGHMEM
-	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
-# endif
-#else
-	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-	case FIX_APIC_BASE:	/* maps dummy local APIC */
-#endif
-		pte = pfn_pte(phys, prot);
-		break;
-
-	default:
-		pte = mfn_pte(phys, prot);
-		break;
-	}
-
-	__native_set_fixmap(idx, pte);
-
-#ifdef CONFIG_X86_64
-	/* Replicate changes to map the vsyscall page into the user
-	   pagetable vsyscall mapping. */
-	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
-		unsigned long vaddr = __fix_to_virt(idx);
-		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
-	}
-#endif
-}
-
 static const struct pv_info xen_info __initdata = {
 	.paravirt_enabled = 1,
 	.shared_kernel_pmd = 0,
@@ -1264,86 +832,6 @@ static const struct pv_apic_ops xen_apic_ops __initdata = {
 #endif
 };
 
-static const struct pv_mmu_ops xen_mmu_ops __initdata = {
-	.pagetable_setup_start = xen_pagetable_setup_start,
-	.pagetable_setup_done = xen_pagetable_setup_done,
-
-	.read_cr2 = xen_read_cr2,
-	.write_cr2 = xen_write_cr2,
-
-	.read_cr3 = xen_read_cr3,
-	.write_cr3 = xen_write_cr3,
-
-	.flush_tlb_user = xen_flush_tlb,
-	.flush_tlb_kernel = xen_flush_tlb,
-	.flush_tlb_single = xen_flush_tlb_single,
-	.flush_tlb_others = xen_flush_tlb_others,
-
-	.pte_update = paravirt_nop,
-	.pte_update_defer = paravirt_nop,
-
-	.pgd_alloc = xen_pgd_alloc,
-	.pgd_free = xen_pgd_free,
-
-	.alloc_pte = xen_alloc_pte_init,
-	.release_pte = xen_release_pte_init,
-	.alloc_pmd = xen_alloc_pte_init,
-	.alloc_pmd_clone = paravirt_nop,
-	.release_pmd = xen_release_pte_init,
-
-#ifdef CONFIG_HIGHPTE
-	.kmap_atomic_pte = xen_kmap_atomic_pte,
-#endif
-
-#ifdef CONFIG_X86_64
-	.set_pte = xen_set_pte,
-#else
-	.set_pte = xen_set_pte_init,
-#endif
-	.set_pte_at = xen_set_pte_at,
-	.set_pmd = xen_set_pmd_hyper,
-
-	.ptep_modify_prot_start = __ptep_modify_prot_start,
-	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
-
-	.pte_val = xen_pte_val,
-	.pgd_val = xen_pgd_val,
-
-	.make_pte = xen_make_pte,
-	.make_pgd = xen_make_pgd,
-
-#ifdef CONFIG_X86_PAE
-	.set_pte_atomic = xen_set_pte_atomic,
-	.set_pte_present = xen_set_pte_at,
-	.pte_clear = xen_pte_clear,
-	.pmd_clear = xen_pmd_clear,
-#endif	/* CONFIG_X86_PAE */
-	.set_pud = xen_set_pud_hyper,
-
-	.make_pmd = xen_make_pmd,
-	.pmd_val = xen_pmd_val,
-
-#if PAGETABLE_LEVELS == 4
-	.pud_val = xen_pud_val,
-	.make_pud = xen_make_pud,
-	.set_pgd = xen_set_pgd_hyper,
-
-	.alloc_pud = xen_alloc_pte_init,
-	.release_pud = xen_release_pte_init,
-#endif	/* PAGETABLE_LEVELS == 4 */
-
-	.activate_mm = xen_activate_mm,
-	.dup_mmap = xen_dup_mmap,
-	.exit_mmap = xen_exit_mmap,
-
-	.lazy_mode = {
-		.enter = paravirt_enter_lazy_mmu,
-		.leave = xen_leave_lazy,
-	},
-
-	.set_fixmap = xen_set_fixmap,
-};
-
 static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
@@ -1386,223 +874,6 @@ static const struct machine_ops __initdata xen_machine_ops = {
 };
 
 
-static void __init xen_reserve_top(void)
-{
-#ifdef CONFIG_X86_32
-	unsigned long top = HYPERVISOR_VIRT_START;
-	struct xen_platform_parameters pp;
-
-	if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
-		top = pp.virt_start;
-
-	reserve_top_address(-top);
-#endif	/* CONFIG_X86_32 */
-}
-
-/*
- * Like __va(), but returns address in the kernel mapping (which is
- * all we have until the physical memory mapping has been set up.
- */
-static void *__ka(phys_addr_t paddr)
-{
-#ifdef CONFIG_X86_64
-	return (void *)(paddr + __START_KERNEL_map);
-#else
-	return __va(paddr);
-#endif
-}
-
-/* Convert a machine address to physical address */
-static unsigned long m2p(phys_addr_t maddr)
-{
-	phys_addr_t paddr;
-
-	maddr &= PTE_PFN_MASK;
-	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
-
-	return paddr;
-}
-
-/* Convert a machine address to kernel virtual */
-static void *m2v(phys_addr_t maddr)
-{
-	return __ka(m2p(maddr));
-}
-
-static void set_page_prot(void *addr, pgprot_t prot)
-{
-	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
-	pte_t pte = pfn_pte(pfn, prot);
-
-	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
-		BUG();
-}
-
-static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
-{
-	unsigned pmdidx, pteidx;
-	unsigned ident_pte;
-	unsigned long pfn;
-
-	ident_pte = 0;
-	pfn = 0;
-	for (pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
-		pte_t *pte_page;
-
-		/* Reuse or allocate a page of ptes */
-		if (pmd_present(pmd[pmdidx]))
-			pte_page = m2v(pmd[pmdidx].pmd);
-		else {
-			/* Check for free pte pages */
-			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
-				break;
-
-			pte_page = &level1_ident_pgt[ident_pte];
-			ident_pte += PTRS_PER_PTE;
-
-			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
-		}
-
-		/* Install mappings */
-		for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
-			pte_t pte;
-
-			if (pfn > max_pfn_mapped)
-				max_pfn_mapped = pfn;
-
-			if (!pte_none(pte_page[pteidx]))
-				continue;
-
-			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
-			pte_page[pteidx] = pte;
-		}
-	}
-
-	for (pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
-		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
-
-	set_page_prot(pmd, PAGE_KERNEL_RO);
-}
-
-#ifdef CONFIG_X86_64
-static void convert_pfn_mfn(void *v)
-{
-	pte_t *pte = v;
-	int i;
-
-	/* All levels are converted the same way, so just treat them
-	   as ptes. */
-	for (i = 0; i < PTRS_PER_PTE; i++)
-		pte[i] = xen_make_pte(pte[i].pte);
-}
-
-/*
- * Set up the inital kernel pagetable.
- *
- * We can construct this by grafting the Xen provided pagetable into
- * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
- * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
- * means that only the kernel has a physical mapping to start with -
- * but that's enough to get __va working.  We need to fill in the rest
- * of the physical mapping once some sort of allocator has been set
- * up.
- */
-static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
-						unsigned long max_pfn)
-{
-	pud_t *l3;
-	pmd_t *l2;
-
-	/* Zap identity mapping */
-	init_level4_pgt[0] = __pgd(0);
-
-	/* Pre-constructed entries are in pfn, so convert to mfn */
-	convert_pfn_mfn(init_level4_pgt);
-	convert_pfn_mfn(level3_ident_pgt);
-	convert_pfn_mfn(level3_kernel_pgt);
-
-	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
-	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
-
-	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
-	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
-	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	/* Set up identity map */
-	xen_map_identity_early(level2_ident_pgt, max_pfn);
-
-	/* Make pagetable pieces RO */
-	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
-
-	/* Pin down new L4 */
-	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
-			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
-
-	/* Unpin Xen-provided one */
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
-
-	/* Switch over */
-	pgd = init_level4_pgt;
-
-	/*
-	 * At this stage there can be no user pgd, and no page
-	 * structure to attach it to, so make sure we just set kernel
-	 * pgd.
-	 */
-	xen_mc_batch();
-	__xen_write_cr3(true, __pa(pgd));
-	xen_mc_issue(PARAVIRT_LAZY_CPU);
-
-	reserve_early(__pa(xen_start_info->pt_base),
-		      __pa(xen_start_info->pt_base +
-			   xen_start_info->nr_pt_frames * PAGE_SIZE),
-		      "XEN PAGETABLES");
-
-	return pgd;
-}
-#else	/* !CONFIG_X86_64 */
-static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
-
-static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
-						unsigned long max_pfn)
-{
-	pmd_t *kernel_pmd;
-
-	init_pg_tables_start = __pa(pgd);
-	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
-	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
-
-	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
-
-	xen_map_identity_early(level2_kernel_pgt, max_pfn);
-
-	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
-	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
-			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
-
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
-	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
-
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
-
-	xen_write_cr3(__pa(swapper_pg_dir));
-
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
-
-	return swapper_pg_dir;
-}
-#endif	/* CONFIG_X86_64 */
-
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 98cb9869eb2..94e452c0b00 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -47,6 +47,7 @@
 #include <asm/tlbflush.h>
 #include <asm/fixmap.h>
 #include <asm/mmu_context.h>
+#include <asm/setup.h>
 #include <asm/paravirt.h>
 #include <asm/linkage.h>
 
@@ -55,6 +56,8 @@
 
 #include <xen/page.h>
 #include <xen/interface/xen.h>
+#include <xen/interface/version.h>
+#include <xen/hvc-console.h>
 
 #include "multicalls.h"
 #include "mmu.h"
@@ -114,6 +117,37 @@ static inline void check_zero(void)
 
 #endif /* CONFIG_XEN_DEBUG_FS */
 
+
+/*
+ * Identity map, in addition to plain kernel map.  This needs to be
+ * large enough to allocate page table pages to allocate the rest.
+ * Each page can map 2MB.
+ */
+static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
+
+#ifdef CONFIG_X86_64
+/* l3 pud for userspace vsyscall mapping */
+static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
+#endif /* CONFIG_X86_64 */
+
+/*
+ * Note about cr3 (pagetable base) values:
+ *
+ * xen_cr3 contains the current logical cr3 value; it contains the
+ * last set cr3.  This may not be the current effective cr3, because
+ * its update may be being lazily deferred.  However, a vcpu looking
+ * at its own cr3 can use this value knowing that it everything will
+ * be self-consistent.
+ *
+ * xen_current_cr3 contains the actual vcpu cr3; it is set once the
+ * hypercall to set the vcpu cr3 is complete (so it may be a little
+ * out of date, but it will never be set early).  If one vcpu is
+ * looking at another vcpu's cr3 value, it should use this variable.
+ */
+DEFINE_PER_CPU(unsigned long, xen_cr3);	 /* cr3 stored as physaddr */
+DEFINE_PER_CPU(unsigned long, xen_current_cr3);	 /* actual vcpu cr3 */
+
+
 /*
  * Just beyond the highest usermode address.  STACK_TOP_MAX has a
  * redzone above it, so round it up to a PGD boundary.
@@ -1152,6 +1186,672 @@ void xen_exit_mmap(struct mm_struct *mm)
 	spin_unlock(&mm->page_table_lock);
 }
 
+static __init void xen_pagetable_setup_start(pgd_t *base)
+{
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+	xen_setup_shared_info();
+}
+
+static void xen_write_cr2(unsigned long cr2)
+{
+	percpu_read(xen_vcpu)->arch.cr2 = cr2;
+}
+
+static unsigned long xen_read_cr2(void)
+{
+	return percpu_read(xen_vcpu)->arch.cr2;
+}
+
+unsigned long xen_read_cr2_direct(void)
+{
+	return percpu_read(xen_vcpu_info.arch.cr2);
+}
+
+static void xen_flush_tlb(void)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+
+	preempt_disable();
+
+	mcs = xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = MMUEXT_TLB_FLUSH_LOCAL;
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+static void xen_flush_tlb_single(unsigned long addr)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+
+	preempt_disable();
+
+	mcs = xen_mc_entry(sizeof(*op));
+	op = mcs.args;
+	op->cmd = MMUEXT_INVLPG_LOCAL;
+	op->arg1.linear_addr = addr & PAGE_MASK;
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+static void xen_flush_tlb_others(const struct cpumask *cpus,
+				 struct mm_struct *mm, unsigned long va)
+{
+	struct {
+		struct mmuext_op op;
+		DECLARE_BITMAP(mask, NR_CPUS);
+	} *args;
+	struct multicall_space mcs;
+
+	BUG_ON(cpumask_empty(cpus));
+	BUG_ON(!mm);
+
+	mcs = xen_mc_entry(sizeof(*args));
+	args = mcs.args;
+	args->op.arg2.vcpumask = to_cpumask(args->mask);
+
+	/* Remove us, and any offline CPUS. */
+	cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
+	if (unlikely(cpumask_empty(to_cpumask(args->mask))))
+		goto issue;
+
+	if (va == TLB_FLUSH_ALL) {
+		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
+	} else {
+		args->op.cmd = MMUEXT_INVLPG_MULTI;
+		args->op.arg1.linear_addr = va;
+	}
+
+	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
+
+issue:
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+
+static unsigned long xen_read_cr3(void)
+{
+	return percpu_read(xen_cr3);
+}
+
+static void set_current_cr3(void *v)
+{
+	percpu_write(xen_current_cr3, (unsigned long)v);
+}
+
+static void __xen_write_cr3(bool kernel, unsigned long cr3)
+{
+	struct mmuext_op *op;
+	struct multicall_space mcs;
+	unsigned long mfn;
+
+	if (cr3)
+		mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	else
+		mfn = 0;
+
+	WARN_ON(mfn == 0 && kernel);
+
+	mcs = __xen_mc_entry(sizeof(*op));
+
+	op = mcs.args;
+	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
+	op->arg1.mfn = mfn;
+
+	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+	if (kernel) {
+		percpu_write(xen_cr3, cr3);
+
+		/* Update xen_current_cr3 once the batch has actually
+		   been submitted. */
+		xen_mc_callback(set_current_cr3, (void *)cr3);
+	}
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+	BUG_ON(preemptible());
+
+	xen_mc_batch();  /* disables interrupts */
+
+	/* Update while interrupts are disabled, so its atomic with
+	   respect to ipis */
+	percpu_write(xen_cr3, cr3);
+
+	__xen_write_cr3(true, cr3);
+
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+		if (user_pgd)
+			__xen_write_cr3(false, __pa(user_pgd));
+		else
+			__xen_write_cr3(false, 0);
+	}
+#endif
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
+}
+
+static int xen_pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = mm->pgd;
+	int ret = 0;
+
+	BUG_ON(PagePinned(virt_to_page(pgd)));
+
+#ifdef CONFIG_X86_64
+	{
+		struct page *page = virt_to_page(pgd);
+		pgd_t *user_pgd;
+
+		BUG_ON(page->private != 0);
+
+		ret = -ENOMEM;
+
+		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		page->private = (unsigned long)user_pgd;
+
+		if (user_pgd != NULL) {
+			user_pgd[pgd_index(VSYSCALL_START)] =
+				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+			ret = 0;
+		}
+
+		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+	}
+#endif
+
+	return ret;
+}
+
+static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_X86_64
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+	if (user_pgd)
+		free_page((unsigned long)user_pgd);
+#endif
+}
+
+
+/* Early in boot, while setting up the initial pagetable, assume
+   everything is pinned. */
+static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
+{
+#ifdef CONFIG_FLATMEM
+	BUG_ON(mem_map);	/* should only be used early */
+#endif
+	make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+}
+
+/* Early release_pte assumes that all pts are pinned, since there's
+   only init_mm and anything attached to that is pinned. */
+static void xen_release_pte_init(unsigned long pfn)
+{
+	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
+}
+
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+	struct mmuext_op op;
+	op.cmd = cmd;
+	op.arg1.mfn = pfn_to_mfn(pfn);
+	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+		BUG();
+}
+
+/* This needs to make sure the new pte page is pinned iff its being
+   attached to a pinned pagetable. */
+static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level)
+{
+	struct page *page = pfn_to_page(pfn);
+
+	if (PagePinned(virt_to_page(mm->pgd))) {
+		SetPagePinned(page);
+
+		vm_unmap_aliases();
+		if (!PageHighMem(page)) {
+			make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
+			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
+				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+		} else {
+			/* make sure there are no stray mappings of
+			   this page */
+			kmap_flush_unused();
+		}
+	}
+}
+
+static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PTE);
+}
+
+static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PMD);
+}
+
+/* This should never happen until we're OK to use struct page */
+static void xen_release_ptpage(unsigned long pfn, unsigned level)
+{
+	struct page *page = pfn_to_page(pfn);
+
+	if (PagePinned(page)) {
+		if (!PageHighMem(page)) {
+			if (level == PT_PTE && USE_SPLIT_PTLOCKS)
+				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
+		}
+		ClearPagePinned(page);
+	}
+}
+
+static void xen_release_pte(unsigned long pfn)
+{
+	xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pmd(unsigned long pfn)
+{
+	xen_release_ptpage(pfn, PT_PMD);
+}
+
+#if PAGETABLE_LEVELS == 4
+static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PUD);
+}
+
+static void xen_release_pud(unsigned long pfn)
+{
+	xen_release_ptpage(pfn, PT_PUD);
+}
+#endif
+
+void __init xen_reserve_top(void)
+{
+#ifdef CONFIG_X86_32
+	unsigned long top = HYPERVISOR_VIRT_START;
+	struct xen_platform_parameters pp;
+
+	if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
+		top = pp.virt_start;
+
+	reserve_top_address(-top);
+#endif	/* CONFIG_X86_32 */
+}
+
+/*
+ * Like __va(), but returns address in the kernel mapping (which is
+ * all we have until the physical memory mapping has been set up.
+ */
+static void *__ka(phys_addr_t paddr)
+{
+#ifdef CONFIG_X86_64
+	return (void *)(paddr + __START_KERNEL_map);
+#else
+	return __va(paddr);
+#endif
+}
+
+/* Convert a machine address to physical address */
+static unsigned long m2p(phys_addr_t maddr)
+{
+	phys_addr_t paddr;
+
+	maddr &= PTE_PFN_MASK;
+	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
+
+	return paddr;
+}
+
+/* Convert a machine address to kernel virtual */
+static void *m2v(phys_addr_t maddr)
+{
+	return __ka(m2p(maddr));
+}
+
+static void set_page_prot(void *addr, pgprot_t prot)
+{
+	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
+	pte_t pte = pfn_pte(pfn, prot);
+
+	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
+		BUG();
+}
+
+static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+{
+	unsigned pmdidx, pteidx;
+	unsigned ident_pte;
+	unsigned long pfn;
+
+	ident_pte = 0;
+	pfn = 0;
+	for (pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
+		pte_t *pte_page;
+
+		/* Reuse or allocate a page of ptes */
+		if (pmd_present(pmd[pmdidx]))
+			pte_page = m2v(pmd[pmdidx].pmd);
+		else {
+			/* Check for free pte pages */
+			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
+				break;
+
+			pte_page = &level1_ident_pgt[ident_pte];
+			ident_pte += PTRS_PER_PTE;
+
+			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
+		}
+
+		/* Install mappings */
+		for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
+			pte_t pte;
+
+			if (pfn > max_pfn_mapped)
+				max_pfn_mapped = pfn;
+
+			if (!pte_none(pte_page[pteidx]))
+				continue;
+
+			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
+			pte_page[pteidx] = pte;
+		}
+	}
+
+	for (pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
+		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
+
+	set_page_prot(pmd, PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_X86_64
+static void convert_pfn_mfn(void *v)
+{
+	pte_t *pte = v;
+	int i;
+
+	/* All levels are converted the same way, so just treat them
+	   as ptes. */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		pte[i] = xen_make_pte(pte[i].pte);
+}
+
+/*
+ * Set up the inital kernel pagetable.
+ *
+ * We can construct this by grafting the Xen provided pagetable into
+ * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
+ * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
+ * means that only the kernel has a physical mapping to start with -
+ * but that's enough to get __va working.  We need to fill in the rest
+ * of the physical mapping once some sort of allocator has been set
+ * up.
+ */
+__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+					 unsigned long max_pfn)
+{
+	pud_t *l3;
+	pmd_t *l2;
+
+	/* Zap identity mapping */
+	init_level4_pgt[0] = __pgd(0);
+
+	/* Pre-constructed entries are in pfn, so convert to mfn */
+	convert_pfn_mfn(init_level4_pgt);
+	convert_pfn_mfn(level3_ident_pgt);
+	convert_pfn_mfn(level3_kernel_pgt);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
+
+	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
+	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	/* Set up identity map */
+	xen_map_identity_early(level2_ident_pgt, max_pfn);
+
+	/* Make pagetable pieces RO */
+	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+
+	/* Pin down new L4 */
+	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+	/* Unpin Xen-provided one */
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	/* Switch over */
+	pgd = init_level4_pgt;
+
+	/*
+	 * At this stage there can be no user pgd, and no page
+	 * structure to attach it to, so make sure we just set kernel
+	 * pgd.
+	 */
+	xen_mc_batch();
+	__xen_write_cr3(true, __pa(pgd));
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
+	return pgd;
+}
+#else	/* !CONFIG_X86_64 */
+static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
+
+__init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
+					 unsigned long max_pfn)
+{
+	pmd_t *kernel_pmd;
+
+	init_pg_tables_start = __pa(pgd);
+	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
+
+	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
+	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+
+	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
+			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	xen_write_cr3(__pa(swapper_pg_dir));
+
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+
+	return swapper_pg_dir;
+}
+#endif	/* CONFIG_X86_64 */
+
+static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
+{
+	pte_t pte;
+
+	phys >>= PAGE_SHIFT;
+
+	switch (idx) {
+	case FIX_BTMAP_END ... FIX_BTMAP_BEGIN:
+#ifdef CONFIG_X86_F00F_BUG
+	case FIX_F00F_IDT:
+#endif
+#ifdef CONFIG_X86_32
+	case FIX_WP_TEST:
+	case FIX_VDSO:
+# ifdef CONFIG_HIGHMEM
+	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
+# endif
+#else
+	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	case FIX_APIC_BASE:	/* maps dummy local APIC */
+#endif
+		pte = pfn_pte(phys, prot);
+		break;
+
+	default:
+		pte = mfn_pte(phys, prot);
+		break;
+	}
+
+	__native_set_fixmap(idx, pte);
+
+#ifdef CONFIG_X86_64
+	/* Replicate changes to map the vsyscall page into the user
+	   pagetable vsyscall mapping. */
+	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
+		unsigned long vaddr = __fix_to_virt(idx);
+		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
+	}
+#endif
+}
+
+__init void xen_post_allocator_init(void)
+{
+	pv_mmu_ops.set_pte = xen_set_pte;
+	pv_mmu_ops.set_pmd = xen_set_pmd;
+	pv_mmu_ops.set_pud = xen_set_pud;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.set_pgd = xen_set_pgd;
+#endif
+
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	pv_mmu_ops.alloc_pte = xen_alloc_pte;
+	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
+	pv_mmu_ops.release_pte = xen_release_pte;
+	pv_mmu_ops.release_pmd = xen_release_pmd;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.alloc_pud = xen_alloc_pud;
+	pv_mmu_ops.release_pud = xen_release_pud;
+#endif
+
+#ifdef CONFIG_X86_64
+	SetPagePinned(virt_to_page(level3_user_vsyscall));
+#endif
+	xen_mark_init_mm_pinned();
+}
+
+
+const struct pv_mmu_ops xen_mmu_ops __initdata = {
+	.pagetable_setup_start = xen_pagetable_setup_start,
+	.pagetable_setup_done = xen_pagetable_setup_done,
+
+	.read_cr2 = xen_read_cr2,
+	.write_cr2 = xen_write_cr2,
+
+	.read_cr3 = xen_read_cr3,
+	.write_cr3 = xen_write_cr3,
+
+	.flush_tlb_user = xen_flush_tlb,
+	.flush_tlb_kernel = xen_flush_tlb,
+	.flush_tlb_single = xen_flush_tlb_single,
+	.flush_tlb_others = xen_flush_tlb_others,
+
+	.pte_update = paravirt_nop,
+	.pte_update_defer = paravirt_nop,
+
+	.pgd_alloc = xen_pgd_alloc,
+	.pgd_free = xen_pgd_free,
+
+	.alloc_pte = xen_alloc_pte_init,
+	.release_pte = xen_release_pte_init,
+	.alloc_pmd = xen_alloc_pte_init,
+	.alloc_pmd_clone = paravirt_nop,
+	.release_pmd = xen_release_pte_init,
+
+#ifdef CONFIG_HIGHPTE
+	.kmap_atomic_pte = xen_kmap_atomic_pte,
+#endif
+
+#ifdef CONFIG_X86_64
+	.set_pte = xen_set_pte,
+#else
+	.set_pte = xen_set_pte_init,
+#endif
+	.set_pte_at = xen_set_pte_at,
+	.set_pmd = xen_set_pmd_hyper,
+
+	.ptep_modify_prot_start = __ptep_modify_prot_start,
+	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
+
+	.pte_val = xen_pte_val,
+	.pgd_val = xen_pgd_val,
+
+	.make_pte = xen_make_pte,
+	.make_pgd = xen_make_pgd,
+
+#ifdef CONFIG_X86_PAE
+	.set_pte_atomic = xen_set_pte_atomic,
+	.set_pte_present = xen_set_pte_at,
+	.pte_clear = xen_pte_clear,
+	.pmd_clear = xen_pmd_clear,
+#endif	/* CONFIG_X86_PAE */
+	.set_pud = xen_set_pud_hyper,
+
+	.make_pmd = xen_make_pmd,
+	.pmd_val = xen_pmd_val,
+
+#if PAGETABLE_LEVELS == 4
+	.pud_val = xen_pud_val,
+	.make_pud = xen_make_pud,
+	.set_pgd = xen_set_pgd_hyper,
+
+	.alloc_pud = xen_alloc_pte_init,
+	.release_pud = xen_release_pte_init,
+#endif	/* PAGETABLE_LEVELS == 4 */
+
+	.activate_mm = xen_activate_mm,
+	.dup_mmap = xen_dup_mmap,
+	.exit_mmap = xen_exit_mmap,
+
+	.lazy_mode = {
+		.enter = paravirt_enter_lazy_mmu,
+		.leave = xen_leave_lazy,
+	},
+
+	.set_fixmap = xen_set_fixmap,
+};
+
+
 #ifdef CONFIG_XEN_DEBUG_FS
 
 static struct dentry *d_mmu_debug;
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 98d71659da5..24d1b44a337 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -54,4 +54,7 @@ pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t
 void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 				  pte_t *ptep, pte_t pte);
 
+unsigned long xen_read_cr2_direct(void);
+
+extern const struct pv_mmu_ops xen_mmu_ops;
 #endif	/* _XEN_MMU_H */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index c1f8faf0a2c..11913fc94c1 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -13,6 +13,7 @@ extern const char xen_failsafe_callback[];
 struct trap_info;
 void xen_copy_trap_info(struct trap_info *traps);
 
+DECLARE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 DECLARE_PER_CPU(unsigned long, xen_cr3);
 DECLARE_PER_CPU(unsigned long, xen_current_cr3);
 
@@ -22,6 +23,13 @@ extern struct shared_info *HYPERVISOR_shared_info;
 
 void xen_setup_mfn_list_list(void);
 void xen_setup_shared_info(void);
+void xen_setup_machphys_mapping(void);
+pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
+void xen_ident_map_ISA(void);
+void xen_reserve_top(void);
+
+void xen_leave_lazy(void);
+void xen_post_allocator_init(void);
 
 char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
-- 
cgit v1.2.3


From 41edafdb78feac1d1f8823846209975fde990633 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:02 -0800
Subject: x86/pvops: add a paravirt_ident functions to allow special patching

Impact: Optimization

Several paravirt ops implementations simply return their arguments,
the most obvious being the make_pte/pte_val class of operations on
native.

On 32-bit, the identity function is literally a no-op, as the calling
convention uses the same registers for the first argument and return.
On 64-bit, it can be implemented with a single "mov".

This patch adds special identity functions for 32 and 64 bit argument,
and machinery to recognize them and replace them with either nops or a
mov as appropriate.

At the moment, the only users for the identity functions are the
pagetable entry conversion functions.

The result is a measureable improvement on pagetable-heavy benchmarks
(2-3%, reducing the pvops overhead from 5 to 2%).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h     |  5 +++
 arch/x86/kernel/paravirt.c          | 75 ++++++++++++++++++++++++++++++++-----
 arch/x86/kernel/paravirt_patch_32.c | 12 ++++++
 arch/x86/kernel/paravirt_patch_64.c | 15 ++++++++
 4 files changed, 98 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 17577888709..961d10c12f1 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -388,6 +388,8 @@ extern struct pv_lock_ops pv_lock_ops;
 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
 
 unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
 unsigned paravirt_patch_ignore(unsigned len);
 unsigned paravirt_patch_call(void *insnbuf,
 			     const void *target, u16 tgt_clobbers,
@@ -1371,6 +1373,9 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 }
 
 void _paravirt_nop(void);
+u32 _paravirt_ident_32(u32);
+u64 _paravirt_ident_64(u64);
+
 #define paravirt_nop	((void *)_paravirt_nop)
 
 void paravirt_use_bytelocks(void);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 202514be592..dd25e2b1593 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -44,6 +44,17 @@ void _paravirt_nop(void)
 {
 }
 
+/* identity function, which can be inlined */
+u32 _paravirt_ident_32(u32 x)
+{
+	return x;
+}
+
+u64 _paravirt_ident_64(u64 x)
+{
+	return x;
+}
+
 static void __init default_banner(void)
 {
 	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
@@ -138,9 +149,16 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 	if (opfunc == NULL)
 		/* If there's no function, patch it with a ud2a (BUG) */
 		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
-	else if (opfunc == paravirt_nop)
+	else if (opfunc == _paravirt_nop)
 		/* If the operation is a nop, then nop the callsite */
 		ret = paravirt_patch_nop();
+
+	/* identity functions just return their single argument */
+	else if (opfunc == _paravirt_ident_32)
+		ret = paravirt_patch_ident_32(insnbuf, len);
+	else if (opfunc == _paravirt_ident_64)
+		ret = paravirt_patch_ident_64(insnbuf, len);
+
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
 		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
 		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
@@ -373,6 +391,45 @@ struct pv_apic_ops pv_apic_ops = {
 #endif
 };
 
+typedef pte_t make_pte_t(pteval_t);
+typedef pmd_t make_pmd_t(pmdval_t);
+typedef pud_t make_pud_t(pudval_t);
+typedef pgd_t make_pgd_t(pgdval_t);
+
+typedef pteval_t pte_val_t(pte_t);
+typedef pmdval_t pmd_val_t(pmd_t);
+typedef pudval_t pud_val_t(pud_t);
+typedef pgdval_t pgd_val_t(pgd_t);
+
+
+#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
+/* 32-bit pagetable entries */
+#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_32
+#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_32
+
+#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_32
+#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_32
+
+#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_32
+#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_32
+
+#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_32
+#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_32
+#else
+/* 64-bit pagetable entries */
+#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_64
+#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_64
+
+#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_64
+#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_64
+
+#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_64
+#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_64
+
+#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_64
+#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_64
+#endif
+
 struct pv_mmu_ops pv_mmu_ops = {
 #ifndef CONFIG_X86_64
 	.pagetable_setup_start = native_pagetable_setup_start,
@@ -424,21 +481,21 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.pmd_clear = native_pmd_clear,
 #endif
 	.set_pud = native_set_pud,
-	.pmd_val = native_pmd_val,
-	.make_pmd = native_make_pmd,
+	.pmd_val = paravirt_native_pmd_val,
+	.make_pmd = paravirt_native_make_pmd,
 
 #if PAGETABLE_LEVELS == 4
-	.pud_val = native_pud_val,
-	.make_pud = native_make_pud,
+	.pud_val = paravirt_native_pud_val,
+	.make_pud = paravirt_native_make_pud,
 	.set_pgd = native_set_pgd,
 #endif
 #endif /* PAGETABLE_LEVELS >= 3 */
 
-	.pte_val = native_pte_val,
-	.pgd_val = native_pgd_val,
+	.pte_val = paravirt_native_pte_val,
+	.pgd_val = paravirt_native_pgd_val,
 
-	.make_pte = native_make_pte,
-	.make_pgd = native_make_pgd,
+	.make_pte = paravirt_native_make_pte,
+	.make_pgd = paravirt_native_make_pgd,
 
 	.dup_mmap = paravirt_nop,
 	.exit_mmap = paravirt_nop,
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index 9fe644f4861..d9f32e6d6ab 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -12,6 +12,18 @@ DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
 DEF_NATIVE(pv_cpu_ops, clts, "clts");
 DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
 
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len)
+{
+	/* arg in %eax, return in %eax */
+	return 0;
+}
+
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len)
+{
+	/* arg in %edx:%eax, return in %edx:%eax */
+	return 0;
+}
+
 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		      unsigned long addr, unsigned len)
 {
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index 061d01df9ae..3f08f34f93e 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -19,6 +19,21 @@ DEF_NATIVE(pv_cpu_ops, usergs_sysret64, "swapgs; sysretq");
 DEF_NATIVE(pv_cpu_ops, usergs_sysret32, "swapgs; sysretl");
 DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
 
+DEF_NATIVE(, mov32, "mov %edi, %eax");
+DEF_NATIVE(, mov64, "mov %rdi, %rax");
+
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len)
+{
+	return paravirt_patch_insns(insnbuf, len,
+				    start__mov32, end__mov32);
+}
+
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len)
+{
+	return paravirt_patch_insns(insnbuf, len,
+				    start__mov64, end__mov64);
+}
+
 unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		      unsigned long addr, unsigned len)
 {
-- 
cgit v1.2.3


From b8aa287f77be943e37a84fa4657e27df95269bfb Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:03 -0800
Subject: x86: fix paravirt clobber in entry_64.S

Impact: Fix latent bug

The clobber is trying to say that anything except RDI is available for
clobbering, but actually clobbers everything.  This hasn't mattered
because the clobbers were basically ignored, but subsequent patches
will rely on them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/entry_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index a52703864a1..e4c9710cae5 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1140,7 +1140,7 @@ ENTRY(native_load_gs_index)
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
-	DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
+	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
 	SWAPGS
 gs_change:
 	movl %edi,%gs
-- 
cgit v1.2.3


From 9104a18dcdd8dfefdddca8ce44988563f13ed3c4 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:04 -0800
Subject: x86/paravirt: selectively save/restore regs around pvops calls

Impact: Optimization

Each asm paravirt-ops call says what registers are available for
clobbering.  This patch makes use of this to selectively save/restore
registers around each pvops call.  In many cases this significantly
shrinks code size.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h | 100 ++++++++++++++++++++++++++--------------
 1 file changed, 65 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 961d10c12f1..dcce961262b 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -12,19 +12,29 @@
 #define CLBR_EAX  (1 << 0)
 #define CLBR_ECX  (1 << 1)
 #define CLBR_EDX  (1 << 2)
+#define CLBR_EDI  (1 << 3)
 
-#ifdef CONFIG_X86_64
-#define CLBR_RSI  (1 << 3)
-#define CLBR_RDI  (1 << 4)
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 4) - 1)
+#else
+#define CLBR_RAX  CLBR_EAX
+#define CLBR_RCX  CLBR_ECX
+#define CLBR_RDX  CLBR_EDX
+#define CLBR_RDI  CLBR_EDI
+#define CLBR_RSI  (1 << 4)
 #define CLBR_R8   (1 << 5)
 #define CLBR_R9   (1 << 6)
 #define CLBR_R10  (1 << 7)
 #define CLBR_R11  (1 << 8)
 #define CLBR_ANY  ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+			 CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG	(CLBR_RAX | CLBR_RDX)
+#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
+
 #include <asm/desc_defs.h>
-#else
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 3) - 1)
 #endif /* X86_64 */
 
 #ifndef __ASSEMBLY__
@@ -1530,33 +1540,49 @@ static inline unsigned long __raw_local_irq_save(void)
 	.popsection
 
 
+#define COND_PUSH(set, mask, reg)			\
+	.if ((~set) & mask); push %reg; .endif
+#define COND_POP(set, mask, reg)			\
+	.if ((~set) & mask); pop %reg; .endif
+
 #ifdef CONFIG_X86_64
-#define PV_SAVE_REGS				\
-	push %rax;				\
-	push %rcx;				\
-	push %rdx;				\
-	push %rsi;				\
-	push %rdi;				\
-	push %r8;				\
-	push %r9;				\
-	push %r10;				\
-	push %r11
-#define PV_RESTORE_REGS				\
-	pop %r11;				\
-	pop %r10;				\
-	pop %r9;				\
-	pop %r8;				\
-	pop %rdi;				\
-	pop %rsi;				\
-	pop %rdx;				\
-	pop %rcx;				\
-	pop %rax
+
+#define PV_SAVE_REGS(set)			\
+	COND_PUSH(set, CLBR_RAX, rax);		\
+	COND_PUSH(set, CLBR_RCX, rcx);		\
+	COND_PUSH(set, CLBR_RDX, rdx);		\
+	COND_PUSH(set, CLBR_RSI, rsi);		\
+	COND_PUSH(set, CLBR_RDI, rdi);		\
+	COND_PUSH(set, CLBR_R8, r8);		\
+	COND_PUSH(set, CLBR_R9, r9);		\
+	COND_PUSH(set, CLBR_R10, r10);		\
+	COND_PUSH(set, CLBR_R11, r11)
+#define PV_RESTORE_REGS(set)			\
+	COND_POP(set, CLBR_R11, r11);		\
+	COND_POP(set, CLBR_R10, r10);		\
+	COND_POP(set, CLBR_R9, r9);		\
+	COND_POP(set, CLBR_R8, r8);		\
+	COND_POP(set, CLBR_RDI, rdi);		\
+	COND_POP(set, CLBR_RSI, rsi);		\
+	COND_POP(set, CLBR_RDX, rdx);		\
+	COND_POP(set, CLBR_RCX, rcx);		\
+	COND_POP(set, CLBR_RAX, rax)
+
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
 #define PARA_INDIRECT(addr)	*addr(%rip)
 #else
-#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
-#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PV_SAVE_REGS(set)			\
+	COND_PUSH(set, CLBR_EAX, eax);		\
+	COND_PUSH(set, CLBR_EDI, edi);		\
+	COND_PUSH(set, CLBR_ECX, ecx);		\
+	COND_PUSH(set, CLBR_EDX, edx)
+#define PV_RESTORE_REGS(set)			\
+	COND_POP(set, CLBR_EDX, edx);		\
+	COND_POP(set, CLBR_ECX, ecx);		\
+	COND_POP(set, CLBR_EDI, edi);		\
+	COND_POP(set, CLBR_EAX, eax)
+
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
 #define PARA_INDIRECT(addr)	*%cs:addr
@@ -1568,15 +1594,15 @@ static inline unsigned long __raw_local_irq_save(void)
 
 #define DISABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  PV_SAVE_REGS;						\
+		  PV_SAVE_REGS(clobbers);				\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
-		  PV_RESTORE_REGS;)			\
+		  PV_RESTORE_REGS(clobbers);)
 
 #define ENABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  PV_SAVE_REGS;						\
+		  PV_SAVE_REGS(clobbers);				\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
-		  PV_RESTORE_REGS;)
+		  PV_RESTORE_REGS(clobbers);)
 
 #define USERGS_SYSRET32							\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
@@ -1606,11 +1632,15 @@ static inline unsigned long __raw_local_irq_save(void)
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
 		  swapgs)
 
+/*
+ * Note: swapgs is very special, and in practise is either going to be
+ * implemented with a single "swapgs" instruction or something very
+ * special.  Either way, we don't need to save any registers for
+ * it.
+ */
 #define SWAPGS								\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
-		  PV_SAVE_REGS;						\
-		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs);		\
-		  PV_RESTORE_REGS					\
+		  call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs)		\
 		 )
 
 #define GET_CR2_INTO_RCX				\
-- 
cgit v1.2.3


From ecb93d1ccd0aac63f03be2db3cac3fa974716f4c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:05 -0800
Subject: x86/paravirt: add register-saving thunks to reduce caller register
 pressure

Impact: Optimization

One of the problems with inserting a pile of C calls where previously
there were none is that the register pressure is greatly increased.
The C calling convention says that the caller must expect a certain
set of registers may be trashed by the callee, and that the callee can
use those registers without restriction.  This includes the function
argument registers, and several others.

This patch seeks to alleviate this pressure by introducing wrapper
thunks that will do the register saving/restoring, so that the
callsite doesn't need to worry about it, but the callee function can
be conventional compiler-generated code.  In many cases (particularly
performance-sensitive cases) the callee will be in assembler anyway,
and need not use the compiler's calling convention.

Standard calling convention is:
	 arguments	    return	scratch
x86-32	 eax edx ecx	    eax		?
x86-64	 rdi rsi rdx rcx    rax		r8 r9 r10 r11

The thunk preserves all argument and scratch registers.  The return
register is not preserved, and is available as a scratch register for
unwrapped callee code (and of course the return value).

Wrapped function pointers are themselves wrapped in a struct
paravirt_callee_save structure, in order to get some warning from the
compiler when functions with mismatched calling conventions are used.

The most common paravirt ops, both statically and dynamically, are
interrupt enable/disable/save/restore, so handle them first.  This is
particularly easy since their calls are handled specially anyway.

XXX Deal with VMI.  What's their calling convention?

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h | 126 +++++++++++++++++++++++++++++++---------
 arch/x86/kernel/paravirt.c      |   8 +--
 arch/x86/kernel/vsmp_64.c       |  12 ++--
 arch/x86/lguest/boot.c          |  13 +++--
 arch/x86/xen/enlighten.c        |   8 +--
 arch/x86/xen/irq.c              |  14 +++--
 6 files changed, 132 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index dcce961262b..f9107b88631 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -17,6 +17,10 @@
 #ifdef CONFIG_X86_32
 /* CLBR_ANY should match all regs platform has. For i386, that's just it */
 #define CLBR_ANY  ((1 << 4) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
+#define CLBR_RET_REG	(CLBR_EAX)
+#define CLBR_SCRATCH	(0)
 #else
 #define CLBR_RAX  CLBR_EAX
 #define CLBR_RCX  CLBR_ECX
@@ -27,16 +31,19 @@
 #define CLBR_R9   (1 << 6)
 #define CLBR_R10  (1 << 7)
 #define CLBR_R11  (1 << 8)
+
 #define CLBR_ANY  ((1 << 9) - 1)
 
 #define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
 			 CLBR_RCX | CLBR_R8 | CLBR_R9)
-#define CLBR_RET_REG	(CLBR_RAX | CLBR_RDX)
+#define CLBR_RET_REG	(CLBR_RAX)
 #define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
 
 #include <asm/desc_defs.h>
 #endif /* X86_64 */
 
+#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/cpumask.h>
@@ -50,6 +57,14 @@ struct tss_struct;
 struct mm_struct;
 struct desc_struct;
 
+/*
+ * Wrapper type for pointers to code which uses the non-standard
+ * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
+ */
+struct paravirt_callee_save {
+	void *func;
+};
+
 /* general info */
 struct pv_info {
 	unsigned int kernel_rpl;
@@ -199,11 +214,15 @@ struct pv_irq_ops {
 	 * expected to use X86_EFLAGS_IF; all other bits
 	 * returned from save_fl are undefined, and may be ignored by
 	 * restore_fl.
+	 *
+	 * NOTE: These functions callers expect the callee to preserve
+	 * more registers than the standard C calling convention.
 	 */
-	unsigned long (*save_fl)(void);
-	void (*restore_fl)(unsigned long);
-	void (*irq_disable)(void);
-	void (*irq_enable)(void);
+	struct paravirt_callee_save save_fl;
+	struct paravirt_callee_save restore_fl;
+	struct paravirt_callee_save irq_disable;
+	struct paravirt_callee_save irq_enable;
+
 	void (*safe_halt)(void);
 	void (*halt)(void);
 
@@ -1437,12 +1456,37 @@ extern struct paravirt_patch_site __parainstructions[],
 	__parainstructions_end[];
 
 #ifdef CONFIG_X86_32
-#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
-#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
+#define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
+#define PV_RESTORE_REGS "popl %edx; popl %ecx;"
+
+/* save and restore all caller-save registers, except return value */
+#define PV_SAVE_ALL_CALLER_REGS PV_SAVE_REGS
+#define PV_RESTORE_ALL_CALLER_REGS PV_RESTORE_REGS
+
 #define PV_FLAGS_ARG "0"
 #define PV_EXTRA_CLOBBERS
 #define PV_VEXTRA_CLOBBERS
 #else
+/* save and restore all caller-save registers, except return value */
+#define PV_SAVE_ALL_CALLER_REGS						\
+	"push %rcx;"							\
+	"push %rdx;"							\
+	"push %rsi;"							\
+	"push %rdi;"							\
+	"push %r8;"							\
+	"push %r9;"							\
+	"push %r10;"							\
+	"push %r11;"
+#define PV_RESTORE_ALL_CALLER_REGS					\
+	"pop %r11;"							\
+	"pop %r10;"							\
+	"pop %r9;"							\
+	"pop %r8;"							\
+	"pop %rdi;"							\
+	"pop %rsi;"							\
+	"pop %rdx;"							\
+	"pop %rcx;"
+
 /* We save some registers, but all of them, that's too much. We clobber all
  * caller saved registers but the argument parameter */
 #define PV_SAVE_REGS "pushq %%rdi;"
@@ -1452,52 +1496,76 @@ extern struct paravirt_patch_site __parainstructions[],
 #define PV_FLAGS_ARG "D"
 #endif
 
+/*
+ * Generate a thunk around a function which saves all caller-save
+ * registers except for the return value.  This allows C functions to
+ * be called from assembler code where fewer than normal registers are
+ * available.  It may also help code generation around calls from C
+ * code if the common case doesn't use many registers.
+ *
+ * When a callee is wrapped in a thunk, the caller can assume that all
+ * arg regs and all scratch registers are preserved across the
+ * call. The return value in rax/eax will not be saved, even for void
+ * functions.
+ */
+#define PV_CALLEE_SAVE_REGS_THUNK(func)					\
+	extern typeof(func) __raw_callee_save_##func;			\
+	static void *__##func##__ __used = func;			\
+									\
+	asm(".pushsection .text;"					\
+	    "__raw_callee_save_" #func ": "				\
+	    PV_SAVE_ALL_CALLER_REGS					\
+	    "call " #func ";"						\
+	    PV_RESTORE_ALL_CALLER_REGS					\
+	    "ret;"							\
+	    ".popsection")
+
+/* Get a reference to a callee-save function */
+#define PV_CALLEE_SAVE(func)						\
+	((struct paravirt_callee_save) { __raw_callee_save_##func })
+
+/* Promise that "func" already uses the right calling convention */
+#define __PV_IS_CALLEE_SAVE(func)			\
+	((struct paravirt_callee_save) { func })
+
 static inline unsigned long __raw_local_save_flags(void)
 {
 	unsigned long f;
 
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     : "=a"(f)
 		     : paravirt_type(pv_irq_ops.save_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
+		     : "memory", "cc");
 	return f;
 }
 
 static inline void raw_local_irq_restore(unsigned long f)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     : "=a"(f)
 		     : PV_FLAGS_ARG(f),
 		       paravirt_type(pv_irq_ops.restore_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "cc");
 }
 
 static inline void raw_local_irq_disable(void)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_disable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "eax", "cc");
 }
 
 static inline void raw_local_irq_enable(void)
 {
-	asm volatile(paravirt_alt(PV_SAVE_REGS
-				  PARAVIRT_CALL
-				  PV_RESTORE_REGS)
+	asm volatile(paravirt_alt(PARAVIRT_CALL)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_enable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
+		     : "memory", "eax", "cc");
 }
 
 static inline unsigned long __raw_local_irq_save(void)
@@ -1541,9 +1609,9 @@ static inline unsigned long __raw_local_irq_save(void)
 
 
 #define COND_PUSH(set, mask, reg)			\
-	.if ((~set) & mask); push %reg; .endif
+	.if ((~(set)) & mask); push %reg; .endif
 #define COND_POP(set, mask, reg)			\
-	.if ((~set) & mask); pop %reg; .endif
+	.if ((~(set)) & mask); pop %reg; .endif
 
 #ifdef CONFIG_X86_64
 
@@ -1594,15 +1662,15 @@ static inline unsigned long __raw_local_irq_save(void)
 
 #define DISABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  PV_SAVE_REGS(clobbers);				\
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);		\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable);	\
-		  PV_RESTORE_REGS(clobbers);)
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
 #define ENABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  PV_SAVE_REGS(clobbers);				\
+		  PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE);		\
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
-		  PV_RESTORE_REGS(clobbers);)
+		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
 #define USERGS_SYSRET32							\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index dd25e2b1593..8adb6b5aa42 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -310,10 +310,10 @@ struct pv_time_ops pv_time_ops = {
 
 struct pv_irq_ops pv_irq_ops = {
 	.init_IRQ = native_init_IRQ,
-	.save_fl = native_save_fl,
-	.restore_fl = native_restore_fl,
-	.irq_disable = native_irq_disable,
-	.irq_enable = native_irq_enable,
+	.save_fl = __PV_IS_CALLEE_SAVE(native_save_fl),
+	.restore_fl = __PV_IS_CALLEE_SAVE(native_restore_fl),
+	.irq_disable = __PV_IS_CALLEE_SAVE(native_irq_disable),
+	.irq_enable = __PV_IS_CALLEE_SAVE(native_irq_enable),
 	.safe_halt = native_safe_halt,
 	.halt = native_halt,
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index a688f3bfaec..c609205df59 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -37,6 +37,7 @@ static unsigned long vsmp_save_fl(void)
 		flags &= ~X86_EFLAGS_IF;
 	return flags;
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_save_fl);
 
 static void vsmp_restore_fl(unsigned long flags)
 {
@@ -46,6 +47,7 @@ static void vsmp_restore_fl(unsigned long flags)
 		flags |= X86_EFLAGS_AC;
 	native_restore_fl(flags);
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_restore_fl);
 
 static void vsmp_irq_disable(void)
 {
@@ -53,6 +55,7 @@ static void vsmp_irq_disable(void)
 
 	native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_disable);
 
 static void vsmp_irq_enable(void)
 {
@@ -60,6 +63,7 @@ static void vsmp_irq_enable(void)
 
 	native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
 }
+PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_enable);
 
 static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
 				  unsigned long addr, unsigned len)
@@ -90,10 +94,10 @@ static void __init set_vsmp_pv_ops(void)
 	       cap, ctl);
 	if (cap & ctl & (1 << 4)) {
 		/* Setup irq ops and turn on vSMP  IRQ fastpath handling */
-		pv_irq_ops.irq_disable = vsmp_irq_disable;
-		pv_irq_ops.irq_enable  = vsmp_irq_enable;
-		pv_irq_ops.save_fl  = vsmp_save_fl;
-		pv_irq_ops.restore_fl  = vsmp_restore_fl;
+		pv_irq_ops.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable);
+		pv_irq_ops.irq_enable  = PV_CALLEE_SAVE(vsmp_irq_enable);
+		pv_irq_ops.save_fl  = PV_CALLEE_SAVE(vsmp_save_fl);
+		pv_irq_ops.restore_fl  = PV_CALLEE_SAVE(vsmp_restore_fl);
 		pv_init_ops.patch = vsmp_patch;
 
 		ctl &= ~(1 << 4);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 92f1c6f3e19..19e33b6cd59 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -173,24 +173,29 @@ static unsigned long save_fl(void)
 {
 	return lguest_data.irq_enabled;
 }
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 
 /* restore_flags() just sets the flags back to the value given. */
 static void restore_fl(unsigned long flags)
 {
 	lguest_data.irq_enabled = flags;
 }
+PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
 
 /* Interrupts go off... */
 static void irq_disable(void)
 {
 	lguest_data.irq_enabled = 0;
 }
+PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 
 /* Interrupts go on... */
 static void irq_enable(void)
 {
 	lguest_data.irq_enabled = X86_EFLAGS_IF;
 }
+PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
+
 /*:*/
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
@@ -984,10 +989,10 @@ __init void lguest_init(void)
 
 	/* interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
-	pv_irq_ops.save_fl = save_fl;
-	pv_irq_ops.restore_fl = restore_fl;
-	pv_irq_ops.irq_disable = irq_disable;
-	pv_irq_ops.irq_enable = irq_enable;
+	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
+	pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+	pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
+	pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
 	/* init-time operations */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0cd2a165f17..ff6d530ccc7 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -676,10 +676,10 @@ void xen_setup_vcpu_info_placement(void)
 	if (have_vcpu_info_placement) {
 		printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
-		pv_irq_ops.save_fl = xen_save_fl_direct;
-		pv_irq_ops.restore_fl = xen_restore_fl_direct;
-		pv_irq_ops.irq_disable = xen_irq_disable_direct;
-		pv_irq_ops.irq_enable = xen_irq_enable_direct;
+		pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct);
+		pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(xen_restore_fl_direct);
+		pv_irq_ops.irq_disable = __PV_IS_CALLEE_SAVE(xen_irq_disable_direct);
+		pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(xen_irq_enable_direct);
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
 	}
 }
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 2e8271431e1..5a070900ad3 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -50,6 +50,7 @@ static unsigned long xen_save_fl(void)
 	*/
 	return (-flags) & X86_EFLAGS_IF;
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_save_fl);
 
 static void xen_restore_fl(unsigned long flags)
 {
@@ -76,6 +77,7 @@ static void xen_restore_fl(unsigned long flags)
 			xen_force_evtchn_callback();
 	}
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_restore_fl);
 
 static void xen_irq_disable(void)
 {
@@ -86,6 +88,7 @@ static void xen_irq_disable(void)
 	percpu_read(xen_vcpu)->evtchn_upcall_mask = 1;
 	preempt_enable_no_resched();
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_irq_disable);
 
 static void xen_irq_enable(void)
 {
@@ -106,6 +109,7 @@ static void xen_irq_enable(void)
 	if (unlikely(vcpu->evtchn_upcall_pending))
 		xen_force_evtchn_callback();
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_irq_enable);
 
 static void xen_safe_halt(void)
 {
@@ -124,10 +128,12 @@ static void xen_halt(void)
 
 static const struct pv_irq_ops xen_irq_ops __initdata = {
 	.init_IRQ = __xen_init_IRQ,
-	.save_fl = xen_save_fl,
-	.restore_fl = xen_restore_fl,
-	.irq_disable = xen_irq_disable,
-	.irq_enable = xen_irq_enable,
+
+	.save_fl = PV_CALLEE_SAVE(xen_save_fl),
+	.restore_fl = PV_CALLEE_SAVE(xen_restore_fl),
+	.irq_disable = PV_CALLEE_SAVE(xen_irq_disable),
+	.irq_enable = PV_CALLEE_SAVE(xen_irq_enable),
+
 	.safe_halt = xen_safe_halt,
 	.halt = xen_halt,
 #ifdef CONFIG_X86_64
-- 
cgit v1.2.3


From 791bad9d28d405d9397ea0c370ffb7c7bdd2aa6e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:06 -0800
Subject: x86/paravirt: implement PVOP_CALL macros for callee-save functions

Impact: Optimization

Functions with the callee save calling convention clobber many fewer
registers than the normal C calling convention.  Implement variants of
PVOP_V?CALL* accordingly.  This only bothers with functions up to 3
args, since functions with more args may as well use the normal
calling convention.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h | 134 +++++++++++++++++++++++++++++-----------
 1 file changed, 99 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index f9107b88631..beb10ecdbe6 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -510,25 +510,45 @@ int paravirt_disable_iospace(void);
  * makes sure the incoming and outgoing types are always correct.
  */
 #ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
+#define PVOP_VCALL_ARGS				\
+	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
 #define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+
+#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
+
 #define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
 					"=c" (__ecx)
 #define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+
+#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
+
 #define EXTRA_CLOBBERS
 #define VEXTRA_CLOBBERS
-#else
-#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
+#else  /* CONFIG_X86_64 */
+#define PVOP_VCALL_ARGS					\
+	unsigned long __edi = __edi, __esi = __esi,	\
+		__edx = __edx, __ecx = __ecx
 #define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+
+#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
+
 #define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
 				"=S" (__esi), "=d" (__edx),		\
 				"=c" (__ecx)
-
 #define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
 
+#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
+
 #define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
 #define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif
+#endif	/* CONFIG_X86_32 */
 
 #ifdef CONFIG_PARAVIRT_DEBUG
 #define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
@@ -536,10 +556,11 @@ int paravirt_disable_iospace(void);
 #define PVOP_TEST_NULL(op)	((void)op)
 #endif
 
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
+		      pre, post, ...)					\
 	({								\
 		rettype __ret;						\
-		PVOP_CALL_ARGS;					\
+		PVOP_CALL_ARGS;						\
 		PVOP_TEST_NULL(op);					\
 		/* This is 32-bit specific, but is okay in 64-bit */	\
 		/* since this condition will never hold */		\
@@ -547,70 +568,113 @@ int paravirt_disable_iospace(void);
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : PVOP_CALL_CLOBBERS		\
+				     : call_clbr			\
 				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
+				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
+				     : "memory", "cc" extra_clbr);	\
 			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
 		} else {						\
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : PVOP_CALL_CLOBBERS		\
+				     : call_clbr			\
 				     : paravirt_type(op),		\
-				       paravirt_clobber(CLBR_ANY),	\
+				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc" EXTRA_CLOBBERS);	\
+				     : "memory", "cc" extra_clbr);	\
 			__ret = (rettype)__eax;				\
 		}							\
 		__ret;							\
 	})
-#define __PVOP_VCALL(op, pre, post, ...)				\
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
+		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
+
+#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_CALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
 	({								\
 		PVOP_VCALL_ARGS;					\
 		PVOP_TEST_NULL(op);					\
 		asm volatile(pre					\
 			     paravirt_alt(PARAVIRT_CALL)		\
 			     post					\
-			     : PVOP_VCALL_CLOBBERS			\
+			     : call_clbr				\
 			     : paravirt_type(op),			\
-			       paravirt_clobber(CLBR_ANY),		\
+			       paravirt_clobber(clbr),			\
 			       ##__VA_ARGS__				\
-			     : "memory", "cc" VEXTRA_CLOBBERS);		\
+			     : "memory", "cc" extra_clbr);		\
 	})
 
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
+		       VEXTRA_CLOBBERS,					\
+		       pre, post, ##__VA_ARGS__)
+
+#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_VCALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+
 #define PVOP_CALL0(rettype, op)						\
 	__PVOP_CALL(rettype, op, "", "")
 #define PVOP_VCALL0(op)							\
 	__PVOP_VCALL(op, "", "")
 
+#define PVOP_CALLEE0(rettype, op)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "")
+#define PVOP_VCALLEE0(op)						\
+	__PVOP_VCALLEESAVE(op, "", "")
+
+
 #define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
 #define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
+
+#define PVOP_CALLEE1(rettype, op, arg1)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALLEE1(op, arg1)						\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
+
 
 #define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
-	"1" ((unsigned long)(arg2)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2))
 #define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
-	"1" ((unsigned long)(arg2)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2))
+
+#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
+			  PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALLEE2(op, arg1, arg2)					\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
+			   PVOP_CALL_ARG2(arg2))
+
 
 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
 #define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
 
 /* This is the only difference in x86_64. We can make it much simpler */
 #ifdef CONFIG_X86_32
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
 	__PVOP_CALL(rettype, op,					\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
 	__PVOP_VCALL(op,						\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
@@ -618,13 +682,13 @@ int paravirt_disable_iospace(void);
 		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
 #else
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
+	__PVOP_CALL(rettype, op, "", "",				\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
-	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
-	"3"((unsigned long)(arg4)))
+	__PVOP_VCALL(op, "", "",					\
+		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
+		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
 #endif
 
 static inline int paravirt_enabled(void)
-- 
cgit v1.2.3


From da5de7c22eb705be709a57e486e7475a6969b994 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 28 Jan 2009 14:35:07 -0800
Subject: x86/paravirt: use callee-saved convention for pte_val/make_pte/etc

Impact: Optimization

In the native case, pte_val, make_pte, etc are all just identity
functions, so there's no need to clobber a lot of registers over them.

(This changes the 32-bit callee-save calling convention to return both
EAX and EDX so functions can return 64-bit values.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h | 78 ++++++++++++++++++++---------------------
 arch/x86/kernel/paravirt.c      | 53 +++++++---------------------
 arch/x86/xen/mmu.c              | 24 ++++++++-----
 3 files changed, 67 insertions(+), 88 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index beb10ecdbe6..2d098b78bc1 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -19,7 +19,7 @@
 #define CLBR_ANY  ((1 << 4) - 1)
 
 #define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
-#define CLBR_RET_REG	(CLBR_EAX)
+#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
 #define CLBR_SCRATCH	(0)
 #else
 #define CLBR_RAX  CLBR_EAX
@@ -308,11 +308,11 @@ struct pv_mmu_ops {
 	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
 					pte_t *ptep, pte_t pte);
 
-	pteval_t (*pte_val)(pte_t);
-	pte_t (*make_pte)(pteval_t pte);
+	struct paravirt_callee_save pte_val;
+	struct paravirt_callee_save make_pte;
 
-	pgdval_t (*pgd_val)(pgd_t);
-	pgd_t (*make_pgd)(pgdval_t pgd);
+	struct paravirt_callee_save pgd_val;
+	struct paravirt_callee_save make_pgd;
 
 #if PAGETABLE_LEVELS >= 3
 #ifdef CONFIG_X86_PAE
@@ -327,12 +327,12 @@ struct pv_mmu_ops {
 
 	void (*set_pud)(pud_t *pudp, pud_t pudval);
 
-	pmdval_t (*pmd_val)(pmd_t);
-	pmd_t (*make_pmd)(pmdval_t pmd);
+	struct paravirt_callee_save pmd_val;
+	struct paravirt_callee_save make_pmd;
 
 #if PAGETABLE_LEVELS == 4
-	pudval_t (*pud_val)(pud_t);
-	pud_t (*make_pud)(pudval_t pud);
+	struct paravirt_callee_save pud_val;
+	struct paravirt_callee_save make_pud;
 
 	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
 #endif	/* PAGETABLE_LEVELS == 4 */
@@ -1155,13 +1155,13 @@ static inline pte_t __pte(pteval_t val)
 	pteval_t ret;
 
 	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pteval_t,
+				   pv_mmu_ops.make_pte,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pteval_t,
-				 pv_mmu_ops.make_pte,
-				 val);
+		ret = PVOP_CALLEE1(pteval_t,
+				   pv_mmu_ops.make_pte,
+				   val);
 
 	return (pte_t) { .pte = ret };
 }
@@ -1171,11 +1171,11 @@ static inline pteval_t pte_val(pte_t pte)
 	pteval_t ret;
 
 	if (sizeof(pteval_t) > sizeof(long))
-		ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte, (u64)pte.pte >> 32);
+		ret = PVOP_CALLEE2(pteval_t, pv_mmu_ops.pte_val,
+				   pte.pte, (u64)pte.pte >> 32);
 	else
-		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_val,
-				 pte.pte);
+		ret = PVOP_CALLEE1(pteval_t, pv_mmu_ops.pte_val,
+				   pte.pte);
 
 	return ret;
 }
@@ -1185,11 +1185,11 @@ static inline pgd_t __pgd(pgdval_t val)
 	pgdval_t ret;
 
 	if (sizeof(pgdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pgdval_t, pv_mmu_ops.make_pgd,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pgdval_t, pv_mmu_ops.make_pgd,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pgdval_t, pv_mmu_ops.make_pgd,
-				 val);
+		ret = PVOP_CALLEE1(pgdval_t, pv_mmu_ops.make_pgd,
+				   val);
 
 	return (pgd_t) { ret };
 }
@@ -1199,11 +1199,11 @@ static inline pgdval_t pgd_val(pgd_t pgd)
 	pgdval_t ret;
 
 	if (sizeof(pgdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd, (u64)pgd.pgd >> 32);
+		ret =  PVOP_CALLEE2(pgdval_t, pv_mmu_ops.pgd_val,
+				    pgd.pgd, (u64)pgd.pgd >> 32);
 	else
-		ret =  PVOP_CALL1(pgdval_t, pv_mmu_ops.pgd_val,
-				  pgd.pgd);
+		ret =  PVOP_CALLEE1(pgdval_t, pv_mmu_ops.pgd_val,
+				    pgd.pgd);
 
 	return ret;
 }
@@ -1267,11 +1267,11 @@ static inline pmd_t __pmd(pmdval_t val)
 	pmdval_t ret;
 
 	if (sizeof(pmdval_t) > sizeof(long))
-		ret = PVOP_CALL2(pmdval_t, pv_mmu_ops.make_pmd,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pmdval_t, pv_mmu_ops.make_pmd,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pmdval_t, pv_mmu_ops.make_pmd,
-				 val);
+		ret = PVOP_CALLEE1(pmdval_t, pv_mmu_ops.make_pmd,
+				   val);
 
 	return (pmd_t) { ret };
 }
@@ -1281,11 +1281,11 @@ static inline pmdval_t pmd_val(pmd_t pmd)
 	pmdval_t ret;
 
 	if (sizeof(pmdval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd, (u64)pmd.pmd >> 32);
+		ret =  PVOP_CALLEE2(pmdval_t, pv_mmu_ops.pmd_val,
+				    pmd.pmd, (u64)pmd.pmd >> 32);
 	else
-		ret =  PVOP_CALL1(pmdval_t, pv_mmu_ops.pmd_val,
-				  pmd.pmd);
+		ret =  PVOP_CALLEE1(pmdval_t, pv_mmu_ops.pmd_val,
+				    pmd.pmd);
 
 	return ret;
 }
@@ -1307,11 +1307,11 @@ static inline pud_t __pud(pudval_t val)
 	pudval_t ret;
 
 	if (sizeof(pudval_t) > sizeof(long))
-		ret = PVOP_CALL2(pudval_t, pv_mmu_ops.make_pud,
-				 val, (u64)val >> 32);
+		ret = PVOP_CALLEE2(pudval_t, pv_mmu_ops.make_pud,
+				   val, (u64)val >> 32);
 	else
-		ret = PVOP_CALL1(pudval_t, pv_mmu_ops.make_pud,
-				 val);
+		ret = PVOP_CALLEE1(pudval_t, pv_mmu_ops.make_pud,
+				   val);
 
 	return (pud_t) { ret };
 }
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 8adb6b5aa42..cea11c8e304 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -391,43 +391,12 @@ struct pv_apic_ops pv_apic_ops = {
 #endif
 };
 
-typedef pte_t make_pte_t(pteval_t);
-typedef pmd_t make_pmd_t(pmdval_t);
-typedef pud_t make_pud_t(pudval_t);
-typedef pgd_t make_pgd_t(pgdval_t);
-
-typedef pteval_t pte_val_t(pte_t);
-typedef pmdval_t pmd_val_t(pmd_t);
-typedef pudval_t pud_val_t(pud_t);
-typedef pgdval_t pgd_val_t(pgd_t);
-
-
 #if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
 /* 32-bit pagetable entries */
-#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_32
-#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_32
-
-#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_32
-#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_32
-
-#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_32
-#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_32
-
-#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_32
-#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_32
+#define PTE_IDENT	__PV_IS_CALLEE_SAVE(_paravirt_ident_32)
 #else
 /* 64-bit pagetable entries */
-#define paravirt_native_make_pte	(make_pte_t *)_paravirt_ident_64
-#define paravirt_native_pte_val		(pte_val_t *)_paravirt_ident_64
-
-#define paravirt_native_make_pmd	(make_pmd_t *)_paravirt_ident_64
-#define paravirt_native_pmd_val		(pmd_val_t *)_paravirt_ident_64
-
-#define paravirt_native_make_pud	(make_pud_t *)_paravirt_ident_64
-#define paravirt_native_pud_val		(pud_val_t *)_paravirt_ident_64
-
-#define paravirt_native_make_pgd	(make_pgd_t *)_paravirt_ident_64
-#define paravirt_native_pgd_val		(pgd_val_t *)_paravirt_ident_64
+#define PTE_IDENT	__PV_IS_CALLEE_SAVE(_paravirt_ident_64)
 #endif
 
 struct pv_mmu_ops pv_mmu_ops = {
@@ -481,21 +450,23 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.pmd_clear = native_pmd_clear,
 #endif
 	.set_pud = native_set_pud,
-	.pmd_val = paravirt_native_pmd_val,
-	.make_pmd = paravirt_native_make_pmd,
+
+	.pmd_val = PTE_IDENT,
+	.make_pmd = PTE_IDENT,
 
 #if PAGETABLE_LEVELS == 4
-	.pud_val = paravirt_native_pud_val,
-	.make_pud = paravirt_native_make_pud,
+	.pud_val = PTE_IDENT,
+	.make_pud = PTE_IDENT,
+
 	.set_pgd = native_set_pgd,
 #endif
 #endif /* PAGETABLE_LEVELS >= 3 */
 
-	.pte_val = paravirt_native_pte_val,
-	.pgd_val = paravirt_native_pgd_val,
+	.pte_val = PTE_IDENT,
+	.pgd_val = PTE_IDENT,
 
-	.make_pte = paravirt_native_make_pte,
-	.make_pgd = paravirt_native_make_pgd,
+	.make_pte = PTE_IDENT,
+	.make_pgd = PTE_IDENT,
 
 	.dup_mmap = paravirt_nop,
 	.exit_mmap = paravirt_nop,
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 94e452c0b00..5e41f7fc6cf 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -492,28 +492,33 @@ pteval_t xen_pte_val(pte_t pte)
 {
 	return pte_mfn_to_pfn(pte.pte);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pte_val);
 
 pgdval_t xen_pgd_val(pgd_t pgd)
 {
 	return pte_mfn_to_pfn(pgd.pgd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pgd_val);
 
 pte_t xen_make_pte(pteval_t pte)
 {
 	pte = pte_pfn_to_mfn(pte);
 	return native_make_pte(pte);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte);
 
 pgd_t xen_make_pgd(pgdval_t pgd)
 {
 	pgd = pte_pfn_to_mfn(pgd);
 	return native_make_pgd(pgd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pgd);
 
 pmdval_t xen_pmd_val(pmd_t pmd)
 {
 	return pte_mfn_to_pfn(pmd.pmd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pmd_val);
 
 void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 {
@@ -590,12 +595,14 @@ pmd_t xen_make_pmd(pmdval_t pmd)
 	pmd = pte_pfn_to_mfn(pmd);
 	return native_make_pmd(pmd);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pmd);
 
 #if PAGETABLE_LEVELS == 4
 pudval_t xen_pud_val(pud_t pud)
 {
 	return pte_mfn_to_pfn(pud.pud);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_pud_val);
 
 pud_t xen_make_pud(pudval_t pud)
 {
@@ -603,6 +610,7 @@ pud_t xen_make_pud(pudval_t pud)
 
 	return native_make_pud(pud);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pud);
 
 pgd_t *xen_get_user_pgd(pgd_t *pgd)
 {
@@ -1813,11 +1821,11 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.ptep_modify_prot_start = __ptep_modify_prot_start,
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
-	.pte_val = xen_pte_val,
-	.pgd_val = xen_pgd_val,
+	.pte_val = PV_CALLEE_SAVE(xen_pte_val),
+	.pgd_val = PV_CALLEE_SAVE(xen_pgd_val),
 
-	.make_pte = xen_make_pte,
-	.make_pgd = xen_make_pgd,
+	.make_pte = PV_CALLEE_SAVE(xen_make_pte),
+	.make_pgd = PV_CALLEE_SAVE(xen_make_pgd),
 
 #ifdef CONFIG_X86_PAE
 	.set_pte_atomic = xen_set_pte_atomic,
@@ -1827,12 +1835,12 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = {
 #endif	/* CONFIG_X86_PAE */
 	.set_pud = xen_set_pud_hyper,
 
-	.make_pmd = xen_make_pmd,
-	.pmd_val = xen_pmd_val,
+	.make_pmd = PV_CALLEE_SAVE(xen_make_pmd),
+	.pmd_val = PV_CALLEE_SAVE(xen_pmd_val),
 
 #if PAGETABLE_LEVELS == 4
-	.pud_val = xen_pud_val,
-	.make_pud = xen_make_pud,
+	.pud_val = PV_CALLEE_SAVE(xen_pud_val),
+	.make_pud = PV_CALLEE_SAVE(xen_make_pud),
 	.set_pgd = xen_set_pgd_hyper,
 
 	.alloc_pud = xen_alloc_pte_init,
-- 
cgit v1.2.3


From 4767afbf1f60f73997a7eb69a86d380f1fb27a92 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 29 Jan 2009 01:51:34 -0800
Subject: x86/paravirt: fix missing callee-save call on pud_val

Impact: Fix build when CONFIG_PARAVIRT_DEBUG is enabled

Fix missed convertion to using callee-saved calls for pud_val, which
causes a compile error when CONFIG_PARAVIRT_DEBUG is enabled.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/paravirt.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 2d098b78bc1..b17365c3974 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1321,11 +1321,11 @@ static inline pudval_t pud_val(pud_t pud)
 	pudval_t ret;
 
 	if (sizeof(pudval_t) > sizeof(long))
-		ret =  PVOP_CALL2(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud, (u64)pud.pud >> 32);
+		ret =  PVOP_CALLEE2(pudval_t, pv_mmu_ops.pud_val,
+				    pud.pud, (u64)pud.pud >> 32);
 	else
-		ret =  PVOP_CALL1(pudval_t, pv_mmu_ops.pud_val,
-				  pud.pud);
+		ret =  PVOP_CALLEE1(pudval_t, pv_mmu_ops.pud_val,
+				    pud.pud);
 
 	return ret;
 }
-- 
cgit v1.2.3


From 193c81b979adbc4a540bf89e75b9039fae75bf82 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:23:27 +0100
Subject: x86, irq: add LOCAL_PERF_VECTOR

Add a slot for the performance monitoring interrupt. Not yet used
by any subsystem - but the hardware has it. (This eases integration
with performance monitoring code.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 9a83a10a5d5..0e2220bb314 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -88,6 +88,11 @@
  */
 #define LOCAL_TIMER_VECTOR	0xef
 
+/*
+ * Performance monitoring interrupt vector:
+ */
+#define LOCAL_PERF_VECTOR	0xee
+
 /*
  * First APIC vector available to drivers: (vectors 0x30-0xee) we
  * start at 0x31(0x41) to spread out vectors evenly between priority
-- 
cgit v1.2.3


From d1de36f5b5a30b8f9dae7142516fb122ce1e0661 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 01:59:14 +0100
Subject: x86, apic: clean up header section

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c | 46 ++++++++++++++++++++++------------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 968c817762a..29e7186b0e8 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -14,43 +14,41 @@
  *	Mikael Pettersson	:	PM converted to driver model.
  */
 
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
 #include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/cpu.h>
-#include <linux/clockchips.h>
+#include <linux/mc146818rtc.h>
 #include <linux/acpi_pmtmr.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/ftrace.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
-#include <linux/dmi.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
 #include <linux/dmar.h>
-#include <linux/ftrace.h>
-#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/dmi.h>
 #include <linux/nmi.h>
-#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
 
-#include <asm/atomic.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/desc.h>
 #include <asm/arch_hooks.h>
-#include <asm/hpet.h>
 #include <asm/pgalloc.h>
+#include <asm/genapic.h>
+#include <asm/atomic.h>
+#include <asm/mpspec.h>
 #include <asm/i8253.h>
-#include <asm/idle.h>
+#include <asm/i8259.h>
 #include <asm/proto.h>
 #include <asm/apic.h>
-#include <asm/i8259.h>
+#include <asm/desc.h>
+#include <asm/hpet.h>
+#include <asm/idle.h>
+#include <asm/mtrr.h>
 #include <asm/smp.h>
 
-#include <asm/genapic.h>
-
 /*
  * Sanity check
  */
-- 
cgit v1.2.3


From 8f47e16348e8e25eedf639092a8a2f10a66aba34 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:03:42 +0100
Subject: x86: update copyrights

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c       | 2 +-
 arch/x86/kernel/io_apic.c    | 2 +-
 arch/x86/kernel/mpparse.c    | 2 +-
 arch/x86/kernel/smp.c        | 2 +-
 arch/x86/kernel/smpboot.c    | 2 +-
 arch/x86/kernel/stacktrace.c | 2 +-
 arch/x86/mm/mmap.c           | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 29e7186b0e8..d6da6dd2f60 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1,7 +1,7 @@
 /*
  *	Local APIC handling, local APIC timers
  *
- *	(c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *	(c) 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
  *
  *	Fixes
  *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 3378ffb2140..57d60c741e3 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1,7 +1,7 @@
 /*
  *	Intel IO-APIC support for multi-Pentium hosts.
  *
- *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
+ *	Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
  *
  *	Many thanks to Stig Venaas for trying out countless experimental
  *	patches and reporting/debugging problems patiently!
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index b46ca7d31fe..66ebb823f39 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -3,7 +3,7 @@
  *	compliant MP-table parsing routines.
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *	(c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
  *      (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
  */
 
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 0eb32ae9bf1..eaaffae31cc 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -2,7 +2,7 @@
  *	Intel SMP support routines.
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
- *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ *	(c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com>
  *      (c) 2002,2003 Andi Kleen, SuSE Labs.
  *
  *	i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 1268a862abb..f40f86fec2f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -2,7 +2,7 @@
  *	x86 SMP booting functions
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *	(c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
  *	Copyright 2001 Andi Kleen, SuSE Labs.
  *
  *	Much of the core SMP work is based on previous work by Thomas Radke, to
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 10786af9554..f7bddc2e37d 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -1,7 +1,7 @@
 /*
  * Stack trace management functions
  *
- *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *  Copyright (C) 2006-2009 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 56fe7124fbe..16582960056 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -4,7 +4,7 @@
  * Based on code by Ingo Molnar and Andi Kleen, copyrighted
  * as follows:
  *
- * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * Copyright 2003-2009 Red Hat Inc.
  * All Rights Reserved.
  * Copyright 2005 Andi Kleen, SUSE Labs.
  * Copyright 2007 Jiri Kosina, SUSE Labs.
-- 
cgit v1.2.3


From 5da690d29f0de17cc1835dd3eb8f8bd0945521f0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:10:03 +0100
Subject: x86, apic: unify the APIC vector enumeration

Most of the vector layout on 32-bit and 64-bit is identical now,
so eliminate the duplicated enumeration of the vectors.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 35 ++++++++++++-----------------------
 1 file changed, 12 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 0e2220bb314..393f85ecdd8 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -50,37 +50,26 @@
  *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
  *  TLB, reschedule and local APIC vectors are performance-critical.
  */
-#ifdef CONFIG_X86_32
-
-# define SPURIOUS_APIC_VECTOR		0xff
-# define ERROR_APIC_VECTOR		0xfe
-# define RESCHEDULE_VECTOR		0xfd
-# define CALL_FUNCTION_VECTOR		0xfc
-# define CALL_FUNCTION_SINGLE_VECTOR	0xfb
-# define THERMAL_APIC_VECTOR		0xfa
-/* 0xf8 - 0xf9 : free */
-# define INVALIDATE_TLB_VECTOR_END	0xf7
-# define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
 
-# define NUM_INVALIDATE_TLB_VECTORS	8
+#define SPURIOUS_APIC_VECTOR		0xff
+#define ERROR_APIC_VECTOR		0xfe
+#define RESCHEDULE_VECTOR		0xfd
+#define CALL_FUNCTION_VECTOR		0xfc
+#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+#define THERMAL_APIC_VECTOR		0xfa
 
+#ifdef CONFIG_X86_32
+/* 0xf8 - 0xf9 : free */
 #else
-
-# define SPURIOUS_APIC_VECTOR		0xff
-# define ERROR_APIC_VECTOR		0xfe
-# define RESCHEDULE_VECTOR		0xfd
-# define CALL_FUNCTION_VECTOR		0xfc
-# define CALL_FUNCTION_SINGLE_VECTOR	0xfb
-# define THERMAL_APIC_VECTOR		0xfa
 # define THRESHOLD_APIC_VECTOR		0xf9
 # define UV_BAU_MESSAGE			0xf8
-# define INVALIDATE_TLB_VECTOR_END	0xf7
-# define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
+#endif
 
+/* f0-f7 used for spreading out TLB flushes: */
+#define INVALIDATE_TLB_VECTOR_END	0xf7
+#define INVALIDATE_TLB_VECTOR_START	0xf0
 #define NUM_INVALIDATE_TLB_VECTORS	8
 
-#endif
-
 /*
  * Local APIC timer IRQ vector is on a different priority level,
  * to work around the 'lost local interrupt if more than 2 IRQ
-- 
cgit v1.2.3


From 647ad94fc0479e33958cb4d0e20e241c0bcf599c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:06:50 +0100
Subject: x86, apic: clean up spurious vector sanity check

Move the spurious vector sanity check to the place where it's
defined - out of a .c file.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 7 +++++++
 arch/x86/kernel/apic.c             | 7 -------
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 393f85ecdd8..2601fd108c7 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -52,6 +52,13 @@
  */
 
 #define SPURIOUS_APIC_VECTOR		0xff
+/*
+ * Sanity check
+ */
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
+# error SPURIOUS_APIC_VECTOR definition error
+#endif
+
 #define ERROR_APIC_VECTOR		0xfe
 #define RESCHEDULE_VECTOR		0xfd
 #define CALL_FUNCTION_VECTOR		0xfc
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index d6da6dd2f60..85d8b50d1af 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -49,13 +49,6 @@
 #include <asm/mtrr.h>
 #include <asm/smp.h>
 
-/*
- * Sanity check
- */
-#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
-# error SPURIOUS_APIC_VECTOR definition error
-#endif
-
 unsigned int num_processors;
 unsigned disabled_cpus __cpuinitdata;
 /* Processor that is doing the boot up */
-- 
cgit v1.2.3


From ed74ca6d5a3e57eb0969d4e14e46cf9f88d25d3f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:16:04 +0100
Subject: x86, voyager: move Voyager-specific defines to voyager.h

They dont belong into the generic headers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/hw_irq.h      | 10 ---------
 arch/x86/include/asm/irq_vectors.h | 35 -------------------------------
 arch/x86/include/asm/voyager.h     | 42 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 42 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 41550797396..3ef2bded97a 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -84,16 +84,6 @@ extern atomic_t irq_mis_count;
 /* EISA */
 extern void eisa_set_level_irq(unsigned int irq);
 
-/* Voyager functions */
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
-
 /* SMP */
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 2601fd108c7..067d22ffb3e 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -135,39 +135,4 @@
 
 #endif
 
-/* Voyager specific defines */
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0			0
-#define VIC_CPI_LEVEL1			1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI			2
-#define VIC_INVALIDATE_CPI		3
-#define VIC_RESCHEDULE_CPI		4
-#define VIC_ENABLE_IRQ_CPI		5
-#define VIC_CALL_FUNCTION_CPI		6
-#define VIC_CALL_FUNCTION_SINGLE_CPI	7
-
-/* Now the QIC CPIs:  Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET			1
-#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT			8
-#define VIC_CMN_INT			15
-
-/* This is the boot CPI for alternate processors.  It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
-
-
 #endif /* _ASM_X86_IRQ_VECTORS_H */
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
index b3e64730762..c1635d43616 100644
--- a/arch/x86/include/asm/voyager.h
+++ b/arch/x86/include/asm/voyager.h
@@ -527,3 +527,45 @@ extern void voyager_smp_intr_init(void);
 #define VOYAGER_PSI_SUBREAD	2
 #define VOYAGER_PSI_SUBWRITE	3
 extern void voyager_cat_psi(__u8, __u16, __u8 *);
+
+/* These define the CPIs we use in linux */
+#define VIC_CPI_LEVEL0			0
+#define VIC_CPI_LEVEL1			1
+/* now the fake CPIs */
+#define VIC_TIMER_CPI			2
+#define VIC_INVALIDATE_CPI		3
+#define VIC_RESCHEDULE_CPI		4
+#define VIC_ENABLE_IRQ_CPI		5
+#define VIC_CALL_FUNCTION_CPI		6
+#define VIC_CALL_FUNCTION_SINGLE_CPI	7
+
+/* Now the QIC CPIs:  Since we don't need the two initial levels,
+ * these are 2 less than the VIC CPIs */
+#define QIC_CPI_OFFSET			1
+#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
+#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
+#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
+#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
+#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
+
+#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
+#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
+
+/* this is the SYS_INT CPI. */
+#define VIC_SYS_INT			8
+#define VIC_CMN_INT			15
+
+/* This is the boot CPI for alternate processors.  It gets overwritten
+ * by the above once the system has activated all available processors */
+#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
+#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
+
+extern asmlinkage void vic_cpi_interrupt(void);
+extern asmlinkage void vic_sys_interrupt(void);
+extern asmlinkage void vic_cmn_interrupt(void);
+extern asmlinkage void qic_timer_interrupt(void);
+extern asmlinkage void qic_invalidate_interrupt(void);
+extern asmlinkage void qic_reschedule_interrupt(void);
+extern asmlinkage void qic_enable_irq_interrupt(void);
+extern asmlinkage void qic_call_function_interrupt(void);
-- 
cgit v1.2.3


From 3e92ab3d7e2edef5dccd8b0db21528699c81d2c0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:21:42 +0100
Subject: x86, irqs, voyager: remove Voyager quirk

Remove a Voyager complication from the generic irq_vectors.h header.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 067d22ffb3e..81fc883b3c0 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -106,7 +106,7 @@
 
 #define NR_IRQS_LEGACY		16
 
-#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_IO_APIC
 
 #include <asm/apicnum.h>	/* need MAX_IO_APICS */
 
@@ -117,22 +117,14 @@
 #  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
 # endif
 #else
-
 # define NR_IRQS					\
 	((8 * NR_CPUS) > (32 * MAX_IO_APICS) ?		\
 		(NR_VECTORS + (8 * NR_CPUS)) :		\
-		(NR_VECTORS + (32 * MAX_IO_APICS)))	\
-
+		(NR_VECTORS + (32 * MAX_IO_APICS)))
 #endif
 
-#elif defined(CONFIG_X86_VOYAGER)
-
-# define NR_IRQS		224
-
-#else /* IO_APIC || VOYAGER */
-
+#else /* !CONFIG_X86_IO_APIC: */
 # define NR_IRQS		16
-
 #endif
 
 #endif /* _ASM_X86_IRQ_VECTORS_H */
-- 
cgit v1.2.3


From 9fc2e79d4f239c1c1dfdab7b10854c7588b39d9a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:48:17 +0100
Subject: x86, irq: add IRQ layout comments

Describe the layout of x86 trap/exception/IRQ vectors and clean
up indentation and other small details.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 92 ++++++++++++++++++++++++--------------
 1 file changed, 58 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 81fc883b3c0..5f7d6a1e3d2 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -3,45 +3,69 @@
 
 #include <linux/threads.h>
 
-#define NMI_VECTOR		0x02
+/*
+ * Linux IRQ vector layout.
+ *
+ * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
+ * be defined by Linux. They are used as a jump table by the CPU when a
+ * given vector is triggered - by a CPU-external, CPU-internal or
+ * software-triggered event.
+ *
+ * Linux sets the kernel code address each entry jumps to early during
+ * bootup, and never changes them. This is the general layout of the
+ * IDT entries:
+ *
+ *  Vectors   0 ...  31 : system traps and exceptions - hardcoded events
+ *  Vectors  32 ... 127 : device interrupts
+ *  Vector  128         : legacy int80 syscall interface
+ *  Vectors 129 ... 237 : device interrupts
+ *  Vectors 238 ... 255 : special interrupts
+ *
+ * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
+ *
+ * This file enumerates the exact layout of them:
+ */
+
+#define NMI_VECTOR			0x02
 
 /*
  * IDT vectors usable for external interrupt sources start
  * at 0x20:
  */
-#define FIRST_EXTERNAL_VECTOR	0x20
+#define FIRST_EXTERNAL_VECTOR		0x20
 
 #ifdef CONFIG_X86_32
-# define SYSCALL_VECTOR		0x80
+# define SYSCALL_VECTOR			0x80
 #else
-# define IA32_SYSCALL_VECTOR	0x80
+# define IA32_SYSCALL_VECTOR		0x80
 #endif
 
 /*
  * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
  * cleanup after irq migration.
  */
-#define IRQ_MOVE_CLEANUP_VECTOR	FIRST_EXTERNAL_VECTOR
+#define IRQ_MOVE_CLEANUP_VECTOR		FIRST_EXTERNAL_VECTOR
 
 /*
  * Vectors 0x30-0x3f are used for ISA interrupts.
  */
-#define IRQ0_VECTOR		(FIRST_EXTERNAL_VECTOR + 0x10)
-#define IRQ1_VECTOR		(IRQ0_VECTOR + 1)
-#define IRQ2_VECTOR		(IRQ0_VECTOR + 2)
-#define IRQ3_VECTOR		(IRQ0_VECTOR + 3)
-#define IRQ4_VECTOR		(IRQ0_VECTOR + 4)
-#define IRQ5_VECTOR		(IRQ0_VECTOR + 5)
-#define IRQ6_VECTOR		(IRQ0_VECTOR + 6)
-#define IRQ7_VECTOR		(IRQ0_VECTOR + 7)
-#define IRQ8_VECTOR		(IRQ0_VECTOR + 8)
-#define IRQ9_VECTOR		(IRQ0_VECTOR + 9)
-#define IRQ10_VECTOR		(IRQ0_VECTOR + 10)
-#define IRQ11_VECTOR		(IRQ0_VECTOR + 11)
-#define IRQ12_VECTOR		(IRQ0_VECTOR + 12)
-#define IRQ13_VECTOR		(IRQ0_VECTOR + 13)
-#define IRQ14_VECTOR		(IRQ0_VECTOR + 14)
-#define IRQ15_VECTOR		(IRQ0_VECTOR + 15)
+#define IRQ0_VECTOR			(FIRST_EXTERNAL_VECTOR + 0x10)
+
+#define IRQ1_VECTOR			(IRQ0_VECTOR +  1)
+#define IRQ2_VECTOR			(IRQ0_VECTOR +  2)
+#define IRQ3_VECTOR			(IRQ0_VECTOR +  3)
+#define IRQ4_VECTOR			(IRQ0_VECTOR +  4)
+#define IRQ5_VECTOR			(IRQ0_VECTOR +  5)
+#define IRQ6_VECTOR			(IRQ0_VECTOR +  6)
+#define IRQ7_VECTOR			(IRQ0_VECTOR +  7)
+#define IRQ8_VECTOR			(IRQ0_VECTOR +  8)
+#define IRQ9_VECTOR			(IRQ0_VECTOR +  9)
+#define IRQ10_VECTOR			(IRQ0_VECTOR + 10)
+#define IRQ11_VECTOR			(IRQ0_VECTOR + 11)
+#define IRQ12_VECTOR			(IRQ0_VECTOR + 12)
+#define IRQ13_VECTOR			(IRQ0_VECTOR + 13)
+#define IRQ14_VECTOR			(IRQ0_VECTOR + 14)
+#define IRQ15_VECTOR			(IRQ0_VECTOR + 15)
 
 /*
  * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
@@ -75,36 +99,36 @@
 /* f0-f7 used for spreading out TLB flushes: */
 #define INVALIDATE_TLB_VECTOR_END	0xf7
 #define INVALIDATE_TLB_VECTOR_START	0xf0
-#define NUM_INVALIDATE_TLB_VECTORS	8
+#define NUM_INVALIDATE_TLB_VECTORS	   8
 
 /*
  * Local APIC timer IRQ vector is on a different priority level,
  * to work around the 'lost local interrupt if more than 2 IRQ
  * sources per level' errata.
  */
-#define LOCAL_TIMER_VECTOR	0xef
+#define LOCAL_TIMER_VECTOR		0xef
 
 /*
  * Performance monitoring interrupt vector:
  */
-#define LOCAL_PERF_VECTOR	0xee
+#define LOCAL_PERF_VECTOR		0xee
 
 /*
  * First APIC vector available to drivers: (vectors 0x30-0xee) we
  * start at 0x31(0x41) to spread out vectors evenly between priority
  * levels. (0x80 is the syscall vector)
  */
-#define FIRST_DEVICE_VECTOR	(IRQ15_VECTOR + 2)
+#define FIRST_DEVICE_VECTOR		(IRQ15_VECTOR + 2)
 
-#define NR_VECTORS		256
+#define NR_VECTORS			 256
 
-#define FPU_IRQ			13
+#define FPU_IRQ				  13
 
-#define	FIRST_VM86_IRQ		3
-#define LAST_VM86_IRQ		15
-#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+#define	FIRST_VM86_IRQ			   3
+#define LAST_VM86_IRQ			  15
+#define invalid_vm86_irq(irq)		((irq) < 3 || (irq) > 15)
 
-#define NR_IRQS_LEGACY		16
+#define NR_IRQS_LEGACY			  16
 
 #ifdef CONFIG_X86_IO_APIC
 
@@ -112,9 +136,9 @@
 
 #ifndef CONFIG_SPARSE_IRQ
 # if NR_CPUS < MAX_IO_APICS
-#  define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
+#  define NR_IRQS 			(NR_VECTORS + (32 * NR_CPUS))
 # else
-#  define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS))
+#  define NR_IRQS			(NR_VECTORS + (32 * MAX_IO_APICS))
 # endif
 #else
 # define NR_IRQS					\
@@ -124,7 +148,7 @@
 #endif
 
 #else /* !CONFIG_X86_IO_APIC: */
-# define NR_IRQS		16
+# define NR_IRQS			16
 #endif
 
 #endif /* _ASM_X86_IRQ_VECTORS_H */
-- 
cgit v1.2.3


From c379698fdac7cb65c96dec549850ce606dd6ceba Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:50:46 +0100
Subject: x86, irq_vectors.h: remove needless includes

Reduce include file dependencies a bit - remove the two headers
that are included in irq_vectors.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 5f7d6a1e3d2..ec87910025d 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_IRQ_VECTORS_H
 #define _ASM_X86_IRQ_VECTORS_H
 
-#include <linux/threads.h>
-
 /*
  * Linux IRQ vector layout.
  *
@@ -131,22 +129,18 @@
 #define NR_IRQS_LEGACY			  16
 
 #ifdef CONFIG_X86_IO_APIC
-
-#include <asm/apicnum.h>	/* need MAX_IO_APICS */
-
-#ifndef CONFIG_SPARSE_IRQ
-# if NR_CPUS < MAX_IO_APICS
-#  define NR_IRQS 			(NR_VECTORS + (32 * NR_CPUS))
+# ifndef CONFIG_SPARSE_IRQ
+#  if NR_CPUS < MAX_IO_APICS
+#   define NR_IRQS 			(NR_VECTORS + (32 * NR_CPUS))
+#  else
+#   define NR_IRQS			(NR_VECTORS + (32 * MAX_IO_APICS))
+#  endif
 # else
-#  define NR_IRQS			(NR_VECTORS + (32 * MAX_IO_APICS))
-# endif
-#else
-# define NR_IRQS					\
+#  define NR_IRQS					\
 	((8 * NR_CPUS) > (32 * MAX_IO_APICS) ?		\
 		(NR_VECTORS + (8 * NR_CPUS)) :		\
 		(NR_VECTORS + (32 * MAX_IO_APICS)))
-#endif
-
+# endif
 #else /* !CONFIG_X86_IO_APIC: */
 # define NR_IRQS			16
 #endif
-- 
cgit v1.2.3


From 009eb3fe146aa6f1951f3c5235851bb8d1330dfb Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 02:56:44 +0100
Subject: x86, irq: describe NR_IRQ sizing details, clean up

Impact: cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index ec87910025d..41e2450e13b 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -126,23 +126,37 @@
 #define LAST_VM86_IRQ			  15
 #define invalid_vm86_irq(irq)		((irq) < 3 || (irq) > 15)
 
+/*
+ * Size the maximum number of interrupts.
+ *
+ * If the irq_desc[] array has a sparse layout, we can size things
+ * generously - it scales up linearly with the maximum number of CPUs,
+ * and the maximum number of IO-APICs, whichever is higher.
+ *
+ * In other cases we size more conservatively, to not create too large
+ * static arrays.
+ */
+
 #define NR_IRQS_LEGACY			  16
 
+#define CPU_VECTOR_LIMIT		(  8 * NR_CPUS      )
+#define IO_APIC_VECTOR_LIMIT		( 32 * MAX_IO_APICS )
+
 #ifdef CONFIG_X86_IO_APIC
-# ifndef CONFIG_SPARSE_IRQ
+# ifdef CONFIG_SPARSE_IRQ
+#  define NR_IRQS					\
+	(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ?	\
+		(NR_VECTORS + CPU_VECTOR_LIMIT)  :	\
+		(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
+# else
 #  if NR_CPUS < MAX_IO_APICS
-#   define NR_IRQS 			(NR_VECTORS + (32 * NR_CPUS))
+#   define NR_IRQS 			(NR_VECTORS + 4*CPU_VECTOR_LIMIT)
 #  else
-#   define NR_IRQS			(NR_VECTORS + (32 * MAX_IO_APICS))
+#   define NR_IRQS			(NR_VECTORS + IO_APIC_VECTOR_LIMIT)
 #  endif
-# else
-#  define NR_IRQS					\
-	((8 * NR_CPUS) > (32 * MAX_IO_APICS) ?		\
-		(NR_VECTORS + (8 * NR_CPUS)) :		\
-		(NR_VECTORS + (32 * MAX_IO_APICS)))
 # endif
 #else /* !CONFIG_X86_IO_APIC: */
-# define NR_IRQS			16
+# define NR_IRQS			NR_IRQS_LEGACY
 #endif
 
 #endif /* _ASM_X86_IRQ_VECTORS_H */
-- 
cgit v1.2.3


From d8106d2e24d54497233ca9cd97fa9bec807de458 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 03:06:17 +0100
Subject: x86, vm86: clean up invalid_vm86_irq()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 41e2450e13b..b07278c55e9 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -124,7 +124,13 @@
 
 #define	FIRST_VM86_IRQ			   3
 #define LAST_VM86_IRQ			  15
-#define invalid_vm86_irq(irq)		((irq) < 3 || (irq) > 15)
+
+#ifndef __ASSEMBLY__
+static inline int invalid_vm86_irq(int irq)
+{
+	return irq < 3 || irq > 15;
+}
+#endif
 
 /*
  * Size the maximum number of interrupts.
-- 
cgit v1.2.3


From 2749ebe320ff9f77548d10fcc0a3464ac21c8e58 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Thu, 29 Jan 2009 15:35:26 -0600
Subject: x86: UV fix uv_flush_send_and_wait()

Impact: fix possible tlb mis-flushing on UV

uv_flush_send_and_wait() should return a pointer if the broadcast
remote tlb shootdown requests fail. That causes the conventional IPI
method of shootdown to be used.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/tlb_uv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 89fce1b6d01..f4b2f27d19b 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -259,7 +259,7 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
 		 * the cpu's, all of which are still in the mask.
 		 */
 		__get_cpu_var(ptcstats).ptc_i++;
-		return 0;
+		return flush_mask;
 	}
 
 	/*
-- 
cgit v1.2.3


From 552be871e67ff577ed36beb2f53d078b42304739 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Fri, 30 Jan 2009 17:47:53 +0900
Subject: x86: pass in cpu number to switch_to_new_gdt()

Impact: cleanup, prepare for xen boot fix.

Xen needs to call this function very early to setup the GDT and
per-cpu segments.  Remove the call to smp_processor_id() and just
pass in the cpu number.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/processor.h    |  2 +-
 arch/x86/kernel/cpu/common.c        |  7 +++----
 arch/x86/kernel/setup_percpu.c      |  2 +-
 arch/x86/kernel/smpboot.c           |  2 +-
 arch/x86/mach-voyager/voyager_smp.c | 11 ++++++-----
 5 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index befa20b4a68..1c25eb69ea8 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -768,7 +768,7 @@ extern int sysenter_setup(void);
 extern struct desc_ptr		early_gdt_descr;
 
 extern void cpu_set_gdt(int);
-extern void switch_to_new_gdt(void);
+extern void switch_to_new_gdt(int);
 extern void cpu_init(void);
 
 static inline unsigned long get_debugctlmsr(void)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 652fdc9a757..6eacd64b602 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -255,10 +255,9 @@ __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
 
 /* Current gdt points %fs at the "master" per-cpu area: after this,
  * it's on the real one. */
-void switch_to_new_gdt(void)
+void switch_to_new_gdt(int cpu)
 {
 	struct desc_ptr gdt_descr;
-	int cpu = smp_processor_id();
 
 	gdt_descr.address = (long)get_cpu_gdt_table(cpu);
 	gdt_descr.size = GDT_SIZE - 1;
@@ -993,7 +992,7 @@ void __cpuinit cpu_init(void)
 	 * and set up the GDT descriptor:
 	 */
 
-	switch_to_new_gdt();
+	switch_to_new_gdt(cpu);
 	loadsegment(fs, 0);
 
 	load_idt((const struct desc_ptr *)&idt_descr);
@@ -1098,7 +1097,7 @@ void __cpuinit cpu_init(void)
 		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
 	load_idt(&idt_descr);
-	switch_to_new_gdt();
+	switch_to_new_gdt(cpu);
 
 	/*
 	 * Set up and load the per-CPU TSS and LDT
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 0d1e7ac439f..ef91747bbed 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -122,7 +122,7 @@ void __init setup_per_cpu_areas(void)
 		 * area.  Reload any changed state for the boot CPU.
 		 */
 		if (cpu == boot_cpu_id)
-			switch_to_new_gdt();
+			switch_to_new_gdt(cpu);
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f9dbcff4354..612d3c74f6a 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1185,7 +1185,7 @@ out:
 void __init native_smp_prepare_boot_cpu(void)
 {
 	int me = smp_processor_id();
-	switch_to_new_gdt();
+	switch_to_new_gdt(me);
 	/* already set me in cpu_online_mask in boot_cpu_init() */
 	cpumask_set_cpu(me, cpu_callout_mask);
 	per_cpu(cpu_state, me) = CPU_ONLINE;
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 331cd6d5648..58c7cac3440 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -1746,12 +1746,13 @@ static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
 
 static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 {
-	switch_to_new_gdt();
+	int cpu = smp_processor_id();
+	switch_to_new_gdt(cpu);
 
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), cpu_callout_map);
-	cpu_set(smp_processor_id(), cpu_possible_map);
-	cpu_set(smp_processor_id(), cpu_present_map);
+	cpu_set(cpu, cpu_online_map);
+	cpu_set(cpu, cpu_callout_map);
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
 }
 
 static int __cpuinit voyager_cpu_up(unsigned int cpu)
-- 
cgit v1.2.3


From 11e3a840cd5b731cdd8f6f956dfae78a8046d09c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 30 Jan 2009 17:47:54 +0900
Subject: x86: split loading percpu segments from loading gdt

Impact: split out a function, no functional change

Xen needs to be able to access percpu data from very early on.  For
various reasons, it cannot also load the gdt at that time.   It does,
however, have a pefectly functional gdt at that point, so there's no
pressing need to reload the gdt.

Split the function to load the segment registers off, so Xen can call
it directly.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/processor.h |  1 +
 arch/x86/kernel/cpu/common.c     | 18 ++++++++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 1c25eb69ea8..656d02ea509 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -769,6 +769,7 @@ extern struct desc_ptr		early_gdt_descr;
 
 extern void cpu_set_gdt(int);
 extern void switch_to_new_gdt(int);
+extern void load_percpu_segment(int);
 extern void cpu_init(void);
 
 static inline unsigned long get_debugctlmsr(void)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6eacd64b602..0f73ea42308 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -253,6 +253,16 @@ static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
 
 __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
 
+void load_percpu_segment(int cpu)
+{
+#ifdef CONFIG_X86_32
+	loadsegment(fs, __KERNEL_PERCPU);
+#else
+	loadsegment(gs, 0);
+	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
+#endif
+}
+
 /* Current gdt points %fs at the "master" per-cpu area: after this,
  * it's on the real one. */
 void switch_to_new_gdt(int cpu)
@@ -263,12 +273,8 @@ void switch_to_new_gdt(int cpu)
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
 	/* Reload the per-cpu base */
-#ifdef CONFIG_X86_32
-	loadsegment(fs, __KERNEL_PERCPU);
-#else
-	loadsegment(gs, 0);
-	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
-#endif
+
+	load_percpu_segment(cpu);
 }
 
 static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-- 
cgit v1.2.3


From 795f99b61d20c34cb04d17d8906b32f745a635ec Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 30 Jan 2009 17:47:54 +0900
Subject: xen: setup percpu data pointers

Impact: fix xen booting

We need to access percpu data fairly early, so set up the percpu
registers as soon as possible.  We only need to load the appropriate
segment register.  We already have a GDT, but its hard to change it
early because we need to manipulate the pagetable to do so, and that
hasn't been set up yet.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/xen/enlighten.c | 3 +++
 arch/x86/xen/smp.c       | 5 ++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bef941f6145..fe19c88a502 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1647,6 +1647,9 @@ asmlinkage void __init xen_start_kernel(void)
 	have_vcpu_info_placement = 0;
 #endif
 
+	/* setup percpu state */
+	load_percpu_segment(0);
+
 	xen_smp_init();
 
 	/* Get mfn list */
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 7735e3dd359..88d5d5ec6be 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -170,7 +170,8 @@ static void __init xen_smp_prepare_boot_cpu(void)
 
 	/* We've switched to the "real" per-cpu gdt, so make sure the
 	   old memory can be recycled */
-	make_lowmem_page_readwrite(&per_cpu_var(gdt_page));
+	make_lowmem_page_readwrite(__per_cpu_load +
+				   (unsigned long)&per_cpu_var(gdt_page));
 
 	xen_setup_vcpu_info_placement();
 }
@@ -235,6 +236,8 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->user_regs.ss = __KERNEL_DS;
 #ifdef CONFIG_X86_32
 	ctxt->user_regs.fs = __KERNEL_PERCPU;
+#else
+	ctxt->gs_base_kernel = per_cpu_offset(cpu);
 #endif
 	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
 	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
-- 
cgit v1.2.3


From 0fc2eb3bade59365ed0b28b8ea3b5c448b2f4a26 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:34:04 +0530
Subject: headers_check fix: alpha, statfs.h

fix the following 'make headers_check' warning:

  usr/include/asm-alpha/statfs.h:6: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/alpha/include/asm/statfs.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/statfs.h b/arch/alpha/include/asm/statfs.h
index de35cd438a1..ccd2e186bfd 100644
--- a/arch/alpha/include/asm/statfs.h
+++ b/arch/alpha/include/asm/statfs.h
@@ -1,6 +1,8 @@
 #ifndef _ALPHA_STATFS_H
 #define _ALPHA_STATFS_H
 
+#include <linux/types.h>
+
 /* Alpha is the only 64-bit platform with 32-bit statfs. And doesn't
    even seem to implement statfs64 */
 #define __statfs_word __u32
-- 
cgit v1.2.3


From 3fd59061b7b16dd0bb7bf779ba297daa5f0bf0f5 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:36:04 +0530
Subject: headers_check fix: alpha, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-alpha/swab.h:4: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-alpha/swab.h:10: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/alpha/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/swab.h b/arch/alpha/include/asm/swab.h
index 68e7089e02d..4d682b16c7c 100644
--- a/arch/alpha/include/asm/swab.h
+++ b/arch/alpha/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _ALPHA_SWAB_H
 #define _ALPHA_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 #include <asm/compiler.h>
 
-- 
cgit v1.2.3


From f100e6d0368742ddb8b6b9be986536e63117c05a Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:38:16 +0530
Subject: headers_check fix: arm, a.out.h

fix the following 'make headers_check' warnings:

  usr/include/asm-arm/a.out.h:5: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-arm/a.out.h:9: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/arm/include/asm/a.out.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/asm/a.out.h
index 79489fdcc8b..083894b2e3b 100644
--- a/arch/arm/include/asm/a.out.h
+++ b/arch/arm/include/asm/a.out.h
@@ -2,7 +2,7 @@
 #define __ARM_A_OUT_H__
 
 #include <linux/personality.h>
-#include <asm/types.h>
+#include <linux/types.h>
 
 struct exec
 {
-- 
cgit v1.2.3


From 4af3bf6b393a2cec947cd42cc10fc03f5b782484 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:41:59 +0530
Subject: headers_check fix: arm, setup.h

fix the following 'make headers_check' warnings:

  usr/include/asm-arm/setup.h:17: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-arm/setup.h:25: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/arm/include/asm/setup.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f2cd18a0932..ee1304f22f9 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -14,7 +14,7 @@
 #ifndef __ASMARM_SETUP_H
 #define __ASMARM_SETUP_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define COMMAND_LINE_SIZE 1024
 
-- 
cgit v1.2.3


From e42ec2418fa96f98ed8d4e6d8a572a7200156df6 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:43:44 +0530
Subject: headers_check fix: arm, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-arm/swab.h:19: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-arm/swab.h:25: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/arm/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index 27a689be085..ca2bf2f6d6e 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -16,7 +16,7 @@
 #define __ASM_ARM_SWAB_H
 
 #include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
 
 #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 #  define __SWAB_64_THRU_32__
-- 
cgit v1.2.3


From 1c6ce704f1e965f64ad0b017842854ceec5b9cc7 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:46:26 +0530
Subject: headers_check fix: avr32, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-avr32/swab.h:7: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-avr32/swab.h:22: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/avr32/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/avr32/include/asm/swab.h b/arch/avr32/include/asm/swab.h
index a14aa5b46d9..14cc737bbca 100644
--- a/arch/avr32/include/asm/swab.h
+++ b/arch/avr32/include/asm/swab.h
@@ -4,7 +4,7 @@
 #ifndef __ASM_AVR32_SWAB_H
 #define __ASM_AVR32_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #define __SWAB_64_THRU_32__
-- 
cgit v1.2.3


From 350eb8b3cb5e4860a4c8352f2cca00e6eb4a16b2 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:48:44 +0530
Subject: headers_check fix: blackfin, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-blackfin/swab.h:4: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-blackfin/swab.h:13: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/blackfin/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/swab.h b/arch/blackfin/include/asm/swab.h
index 69a051b612b..6403ad2932e 100644
--- a/arch/blackfin/include/asm/swab.h
+++ b/arch/blackfin/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _BLACKFIN_SWAB_H
 #define _BLACKFIN_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-- 
cgit v1.2.3


From 295803eea178d777cf3813b16696c54b0b2bcd23 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:55:12 +0530
Subject: headers_check fix: h8300, swab.h

fix the following 'make headers_check' warning:

  usr/include/asm-h8300/swab.h:4: include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/h8300/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/h8300/include/asm/swab.h b/arch/h8300/include/asm/swab.h
index c108f39b8bc..39abbf52807 100644
--- a/arch/h8300/include/asm/swab.h
+++ b/arch/h8300/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _H8300_SWAB_H
 #define _H8300_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 #  define __SWAB_64_THRU_32__
-- 
cgit v1.2.3


From fa9ea6c7abd94482ecd84e130676b6a1b3e61c2c Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 10:59:12 +0530
Subject: headers_check fix: ia64, fpu.h

fix the following 'make headers_check' warning:

  usr/include/asm-ia64/fpu.h:9: include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/ia64/include/asm/fpu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
index 3859558ff0a..b6395ad1500 100644
--- a/arch/ia64/include/asm/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
@@ -6,7 +6,7 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 /* floating point status register: */
 #define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
-- 
cgit v1.2.3


From a812a9170c5db5390280eb4fa075f1555e6ae53c Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:03:28 +0530
Subject: headers_check fix: ia64, gcc_intrin.h

fix the following 'make headers_check' warning:

  usr/include/asm-ia64/gcc_intrin.h:63: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/ia64/include/asm/gcc_intrin.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
index 0f5b5592175..c2c5fd8fcac 100644
--- a/arch/ia64/include/asm/gcc_intrin.h
+++ b/arch/ia64/include/asm/gcc_intrin.h
@@ -6,6 +6,7 @@
  * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
  */
 
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 /* define this macro to get some asm stmts included in 'c' files */
-- 
cgit v1.2.3


From 1ecbb7fcfd20803bdd403de0c9c514da7d6c8843 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:07:06 +0530
Subject: headers_check fix: ia64, intrinsics.h

fix the following 'make headers_check' warning:

  usr/include/asm-ia64/intrinsics.h:57: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/ia64/include/asm/intrinsics.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
index a3e44a5ed49..c47830e26cb 100644
--- a/arch/ia64/include/asm/intrinsics.h
+++ b/arch/ia64/include/asm/intrinsics.h
@@ -10,6 +10,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/types.h>
 /* include compiler specific intrinsics */
 #include <asm/ia64regs.h>
 #ifdef __INTEL_COMPILER
-- 
cgit v1.2.3


From 6ce795065bdd2bfeebd97fa91a95918dcff7d0ec Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:10:22 +0530
Subject: headers_check fix: ia64, kvm.h

fix the following 'make headers_check' warnings:

  usr/include/asm-ia64/kvm.h:24: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-ia64/kvm.h:34: found __[us]{8,16,32,64} type without #include <linux/types.h

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/ia64/include/asm/kvm.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index 68aa6da807c..116761ca462 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -21,8 +21,7 @@
  *
  */
 
-#include <asm/types.h>
-
+#include <linux/types.h>
 #include <linux/ioctl.h>
 
 /* Architectural interrupt line count. */
-- 
cgit v1.2.3


From 040c92b8e5f080e1f5a610bf0e10c683328dce75 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:12:29 +0530
Subject: headers_check fix: ia64, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-ia64/swab.h:9: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-ia64/swab.h:13: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/ia64/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/swab.h b/arch/ia64/include/asm/swab.h
index 6aa58b699ee..c89a8cb5d8a 100644
--- a/arch/ia64/include/asm/swab.h
+++ b/arch/ia64/include/asm/swab.h
@@ -6,7 +6,7 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <asm/intrinsics.h>
 #include <linux/compiler.h>
 
-- 
cgit v1.2.3


From ae612fb05b0f60ff58e2a86eea46dc99532d62c5 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:22:18 +0530
Subject: headers_check fix: mips, sigcontext.h

fix the following 'make headers_check' warning:

  usr/include/asm-mips/sigcontext.h:57: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/mips/include/asm/sigcontext.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/sigcontext.h b/arch/mips/include/asm/sigcontext.h
index 9ce0607d7a4..9e89cf99d4e 100644
--- a/arch/mips/include/asm/sigcontext.h
+++ b/arch/mips/include/asm/sigcontext.h
@@ -9,6 +9,7 @@
 #ifndef _ASM_SIGCONTEXT_H
 #define _ASM_SIGCONTEXT_H
 
+#include <linux/types.h>
 #include <asm/sgidefs.h>
 
 #if _MIPS_SIM == _MIPS_SIM_ABI32
-- 
cgit v1.2.3


From a9f6acc5ab36c7533c9b3e224f7c209d8da4048d Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:23:37 +0530
Subject: headers_check fix: mips, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-mips/swab.h:12: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-mips/swab.h:18: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/mips/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 88f1f7d555c..99993c0d6c1 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -9,7 +9,7 @@
 #define _ASM_SWAB_H
 
 #include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define __SWAB_64_THRU_32__
 
-- 
cgit v1.2.3


From 79f95ac2412c993e52f02cfde1f71d141b2e530d Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:36:07 +0530
Subject: headers_check fix: parisc, pdc.h

fix the following 'make headers_check' warning:

  usr/include/asm-parisc/pdc.h:420: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/parisc/include/asm/pdc.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
index c584b00c607..430f1aeea0b 100644
--- a/arch/parisc/include/asm/pdc.h
+++ b/arch/parisc/include/asm/pdc.h
@@ -336,10 +336,11 @@
 #define NUM_PDC_RESULT	32
 
 #if !defined(__ASSEMBLY__)
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 
+#ifdef __KERNEL__
+
 extern int pdc_type;
 
 /* Values for pdc_type */
-- 
cgit v1.2.3


From 726da1e3408caae6af8372f93380f18986f1003b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:39:01 +0530
Subject: headers_check fix: parisc, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-parisc/swab.h:4: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-parisc/swab.h:9: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/parisc/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/swab.h b/arch/parisc/include/asm/swab.h
index 3ff16c5a335..e78403b129e 100644
--- a/arch/parisc/include/asm/swab.h
+++ b/arch/parisc/include/asm/swab.h
@@ -1,7 +1,7 @@
 #ifndef _PARISC_SWAB_H
 #define _PARISC_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #define __SWAB_64_THRU_32__
-- 
cgit v1.2.3


From 4be2c7ff4f362e41706e84a3d6726bdcda9ab65f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:41:04 +0530
Subject: headers_check fix: powerpc, bootx.h

fix the following 'make headers_check' warnings:

  usr/include/asm-powerpc/bootx.h:12: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-powerpc/bootx.h:57: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/powerpc/include/asm/bootx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h
index 57b82e3f89c..60a3c9ef301 100644
--- a/arch/powerpc/include/asm/bootx.h
+++ b/arch/powerpc/include/asm/bootx.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_BOOTX_H__
 #define __ASM_BOOTX_H__
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #ifdef macintosh
 #include <Types.h>
-- 
cgit v1.2.3


From 785857f5f0b7fbeed934e39af24edec471637375 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:42:29 +0530
Subject: headers_check fix: powerpc, elf.h

fix the following 'make headers_check' warning:

  usr/include/asm-powerpc/elf.h:5: include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/powerpc/include/asm/elf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index cd46f023ec6..b5600ce6055 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -7,7 +7,7 @@
 #include <asm/string.h>
 #endif
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <asm/ptrace.h>
 #include <asm/cputable.h>
 #include <asm/auxvec.h>
-- 
cgit v1.2.3


From 9f2cd967b7f029ebe2c74969709ff9c745344dba Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:44:45 +0530
Subject: headers_check fix: powerpc, kvm.h

fix the following 'make headers_check' warnings:

  usr/include/asm-powerpc/kvm.h:23: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-powerpc/kvm.h:26: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/powerpc/include/asm/kvm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index f993e4198d5..4e0cf65f7f5 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -20,7 +20,7 @@
 #ifndef __LINUX_KVM_POWERPC_H
 #define __LINUX_KVM_POWERPC_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 struct kvm_regs {
 	__u64 pc;
-- 
cgit v1.2.3


From 122bb2207b8107ce117d10fcfd3a2f6c3804a362 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:46:23 +0530
Subject: headers_check fix: powerpc, ps3fb.h

fix the following 'make headers_check' warning:

  usr/include/asm-powerpc/ps3fb.h:33: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/powerpc/include/asm/ps3fb.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
index 3f121fe4010..e7233a84968 100644
--- a/arch/powerpc/include/asm/ps3fb.h
+++ b/arch/powerpc/include/asm/ps3fb.h
@@ -19,6 +19,7 @@
 #ifndef _ASM_POWERPC_PS3FB_H_
 #define _ASM_POWERPC_PS3FB_H_
 
+#include <linux/types.h>
 #include <linux/ioctl.h>
 
 /* ioctl */
-- 
cgit v1.2.3


From 1a16bc4590fcc94630571c541c8fef7a0845c2c0 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:52:05 +0530
Subject: headers_check fix: powerpc, spu_info.h

fix the following 'make headers_check' warning:

  usr/include/asm-powerpc/spu_info.h:27: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/powerpc/include/asm/spu_info.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h
index 3545efbf989..1286c823f0d 100644
--- a/arch/powerpc/include/asm/spu_info.h
+++ b/arch/powerpc/include/asm/spu_info.h
@@ -23,9 +23,10 @@
 #ifndef _SPU_INFO_H
 #define _SPU_INFO_H
 
+#include <linux/types.h>
+
 #ifdef __KERNEL__
 #include <asm/spu.h>
-#include <linux/types.h>
 #else
 struct mfc_cq_sr {
 	__u64 mfc_cq_data0_RW;
-- 
cgit v1.2.3


From 48109870bab7e66f30f933cd218258368024cd9f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 11:54:05 +0530
Subject: headers_check fix: powerpc, swab.h

fix the following 'make headers_check' warning:

  usr/include/asm-powerpc/swab.h:11: include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/powerpc/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/swab.h b/arch/powerpc/include/asm/swab.h
index ef824ae4b79..c581e3ef73e 100644
--- a/arch/powerpc/include/asm/swab.h
+++ b/arch/powerpc/include/asm/swab.h
@@ -8,7 +8,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #ifdef __GNUC__
-- 
cgit v1.2.3


From 1ff8f739c7cc4eaa89b6ba986494f458ff7bdbef Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 31 Jan 2009 12:02:14 +0530
Subject: headers_check fix: xtensa, swab.h

fix the following 'make headers_check' warnings:

  usr/include/asm-xtensa/swab.h:14: include of <linux/types.h> is preferred over <asm/types.h>
  usr/include/asm-xtensa/swab.h:19: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/xtensa/include/asm/swab.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/xtensa/include/asm/swab.h b/arch/xtensa/include/asm/swab.h
index f50b697eb60..226a3916231 100644
--- a/arch/xtensa/include/asm/swab.h
+++ b/arch/xtensa/include/asm/swab.h
@@ -11,7 +11,7 @@
 #ifndef _XTENSA_SWAB_H
 #define _XTENSA_SWAB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 
 #define __SWAB_64_THRU_32__
-- 
cgit v1.2.3


From 6489c611db095356645ca1a2689e93c63caeb310 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Sun, 1 Feb 2009 11:20:30 +0100
Subject: [ARM] pxa/magician: Enable pxa27x_udc and gpio_vbus

This patch depends on otg_transceiver support in pxa27x_udc
(which is queued via linux-usb) to work.
It compiles also without it.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/magician_defconfig       | 56 ++++++++++++++++++++++++++-----
 arch/arm/mach-pxa/include/mach/magician.h |  2 +-
 arch/arm/mach-pxa/magician.c              | 35 ++++++++++++++++---
 3 files changed, 79 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index dde50df09bc..4154d61af66 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sat Jan 17 17:47:17 2009
+# Linux kernel version: 2.6.29-rc3
+# Fri Jan 30 12:42:03 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -44,6 +44,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -114,11 +123,6 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_FREEZER=y
 
 #
@@ -993,6 +997,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1044,12 +1049,45 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
 
 #
 # OTG and related infrastructure
 #
-# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 38d68d99f58..82a399f3f9f 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -69,7 +69,7 @@
 #define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
 #define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
 #define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
 
 /*
  * CPLD EGPIOs
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index b7aafe6823f..af464870c12 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -524,6 +525,31 @@ static struct platform_device pasic3 = {
 	},
 };
 
+/*
+ * USB "Transceiver"
+ */
+
+static struct resource gpio_vbus_resource = {
+	.flags = IORESOURCE_IRQ,
+	.start = IRQ_MAGICIAN_VBUS,
+	.end   = IRQ_MAGICIAN_VBUS,
+};
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
+};
+
+static struct platform_device gpio_vbus = {
+	.name          = "gpio-vbus",
+	.id            = -1,
+	.num_resources = 1,
+	.resource      = &gpio_vbus_resource,
+	.dev = {
+		.platform_data = &gpio_vbus_info,
+	},
+};
+
 /*
  * External power
  */
@@ -601,14 +627,14 @@ static struct resource power_supply_resources[] = {
 	[0] = {
 		.name  = "ac",
 		.flags = IORESOURCE_IRQ,
-		.start = IRQ_MAGICIAN_AC,
-		.end   = IRQ_MAGICIAN_AC,
+		.start = IRQ_MAGICIAN_VBUS,
+		.end   = IRQ_MAGICIAN_VBUS,
 	},
 	[1] = {
 		.name  = "usb",
 		.flags = IORESOURCE_IRQ,
-		.start = IRQ_MAGICIAN_AC,
-		.end   = IRQ_MAGICIAN_AC,
+		.start = IRQ_MAGICIAN_VBUS,
+		.end   = IRQ_MAGICIAN_VBUS,
 	},
 };
 
@@ -732,6 +758,7 @@ static struct platform_device *devices[] __initdata = {
 	&egpio,
 	&backlight,
 	&pasic3,
+	&gpio_vbus,
 	&power_supply,
 	&strataflash,
 	&leds_gpio,
-- 
cgit v1.2.3


From 6432f46c4ffd0a85cab5313bc989a6db32bc0eb4 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:51 +0200
Subject: [ARM] pxa/em-x270: update MMC/SDIO implementation

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 97 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 81 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1aaae97de7d..05f9e9e1224 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -43,12 +43,12 @@
 #include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
+#include "devices.h"
 
 /* GPIO IRQ usage */
 #define GPIO41_ETHIRQ		(41)
 #define GPIO13_MMC_CD		(13)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
 
 /* NAND control GPIOs */
 #define GPIO11_NAND_CS	(11)
@@ -56,6 +56,7 @@
 
 /* Miscelaneous GPIOs */
 #define GPIO93_CAM_RESET	(93)
+#define GPIO95_MMC_WP		(95)
 
 static unsigned long em_x270_pin_config[] = {
 	/* AC'97 */
@@ -163,7 +164,8 @@ static unsigned long em_x270_pin_config[] = {
 	GPIO18_RDY,
 
 	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
+	GPIO95_GPIO,				/* MMC Write protect */
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
@@ -464,47 +466,86 @@ static inline void em_x270_init_ohci(void) {}
 
 /* MCI controller setup */
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
-			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+	int err;
+
+	em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+	if (IS_ERR(em_x270_sdio_ldo)) {
+		dev_err(dev, "can't request SDIO power supply: %ld\n",
+			PTR_ERR(em_x270_sdio_ldo));
+		return PTR_ERR(em_x270_sdio_ldo);
+	}
+
+	err = request_irq(gpio_to_irq(GPIO13_MMC_CD), em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			      IRQF_TRIGGER_FALLING,
 			      "MMC card detect", data);
 	if (err) {
-		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
-		       __func__, err);
-		return err;
+		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+		goto err_irq;
+	}
+
+	err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+	if (err) {
+		dev_err(dev, "can't request MMC write protect: %d\n", err);
+		goto err_gpio_wp;
 	}
 
+	gpio_direction_input(GPIO95_MMC_WP);
+
 	return 0;
+
+err_gpio_wp:
+	free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+err_irq:
+	regulator_put(em_x270_sdio_ldo);
+
+	return err;
 }
 
 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
-	/*
-	   FIXME: current hardware implementation does not allow to
-	   enable/disable MMC power. This will be fixed in next HW releases,
-	   and we'll need to add implmentation here.
-	*/
-	return;
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+		regulator_enable(em_x270_sdio_ldo);
+	} else {
+		regulator_disable(em_x270_sdio_ldo);
+	}
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	int irq = gpio_to_irq(GPIO13_MMC_CD);
-	free_irq(irq, data);
+	free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO95_MMC_WP);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+			  MMC_VDD_30_31|MMC_VDD_31_32,
 	.init 		= em_x270_mci_init,
 	.setpower 	= em_x270_mci_setpower,
+	.get_ro		= em_x270_mci_get_ro,
 	.exit		= em_x270_mci_exit,
 };
 
 static void __init em_x270_init_mmc(void)
 {
+	em_x270_mci_platform_data.detect_delay	= msecs_to_jiffies(250);
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
 #else
@@ -757,6 +798,13 @@ static struct regulator_consumer_supply ldo5_consumers[] = {
 	},
 };
 
+static struct regulator_consumer_supply ldo10_consumers[] = {
+	{
+		.dev = &pxa_device_mci.dev,
+		.supply = "vcc sdio",
+	},
+};
+
 static struct regulator_consumer_supply ldo12_consumers[] = {
 	{
 		.dev = NULL,
@@ -795,6 +843,19 @@ static struct regulator_init_data ldo5_data = {
 	.consumer_supplies = ldo5_consumers,
 };
 
+static struct regulator_init_data ldo10_data = {
+	.constraints = {
+		.min_uV = 2000000,
+		.max_uV = 3200000,
+		.state_mem = {
+			.enabled = 0,
+		},
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo10_consumers),
+	.consumer_supplies = ldo10_consumers,
+};
+
 static struct regulator_init_data ldo12_data = {
 	.constraints = {
 		.min_uV = 3000000,
@@ -833,6 +894,10 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = {
 		.name = "da903x-regulator",
 		.id = DA9030_ID_LDO5,
 		.platform_data = &ldo5_data,
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &ldo10_data,
 	}, {
 		.name = "da903x-regulator",
 		.id = DA9030_ID_LDO12,
-- 
cgit v1.2.3


From 432adf1898381bac5a9ef90262d8a91e16823b11 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:52 +0200
Subject: [ARM] pxa/em-x270: introduce macors to to simplify da9030 subdev
 initialization

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 172 +++++++++++++-------------------------------
 1 file changed, 50 insertions(+), 122 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 05f9e9e1224..7d056cb2334 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -784,136 +784,64 @@ static inline void em_x270_init_camera(void) {}
 #endif
 
 /* DA9030 related initializations */
-static struct regulator_consumer_supply ldo3_consumers[] = {
-	{
-		.dev = NULL,
-		.supply = "vcc gps",
-	},
-};
-
-static struct regulator_consumer_supply ldo5_consumers[] = {
-	{
-		.dev = NULL,
-		.supply = "vcc cam",
-	},
-};
-
-static struct regulator_consumer_supply ldo10_consumers[] = {
-	{
-		.dev = &pxa_device_mci.dev,
-		.supply = "vcc sdio",
-	},
-};
-
-static struct regulator_consumer_supply ldo12_consumers[] = {
-	{
-		.dev = NULL,
-		.supply = "vcc usb",
-	},
-};
-
-static struct regulator_consumer_supply ldo19_consumers[] = {
-	{
-		.dev = NULL,
-		.supply = "vcc gprs",
-	},
-};
-
-static struct regulator_init_data ldo3_data = {
-	.constraints = {
-		.min_uV = 3200000,
-		.max_uV = 3200000,
-		.state_mem = {
-			.enabled = 0,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo3_consumers),
-	.consumer_supplies = ldo3_consumers,
-};
-
-static struct regulator_init_data ldo5_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.state_mem = {
-			.enabled = 0,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
-	.consumer_supplies = ldo5_consumers,
-};
-
-static struct regulator_init_data ldo10_data = {
-	.constraints = {
-		.min_uV = 2000000,
-		.max_uV = 3200000,
-		.state_mem = {
-			.enabled = 0,
-		},
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo10_consumers),
-	.consumer_supplies = ldo10_consumers,
-};
-
-static struct regulator_init_data ldo12_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.state_mem = {
-			.enabled = 0,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo12_consumers),
-	.consumer_supplies = ldo12_consumers,
-};
+#define REGULATOR_CONSUMER(_name, _dev, _supply)			       \
+	static struct regulator_consumer_supply _name##_consumers[] = {	\
+		{							\
+			.dev = _dev,					\
+			.supply = _supply,				\
+		},							\
+	}
 
-static struct regulator_init_data ldo19_data = {
-	.constraints = {
-		.min_uV = 3200000,
-		.max_uV = 3200000,
-		.state_mem = {
-			.enabled = 0,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo19_consumers),
-	.consumer_supplies = ldo19_consumers,
-};
+REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
+	static struct regulator_init_data _ldo##_data = {		\
+		.constraints = {					\
+			.min_uV = _min_uV,				\
+			.max_uV = _max_uV,				\
+			.state_mem = {					\
+				.enabled = 0,				\
+			},						\
+			.valid_ops_mask = _ops_mask,			\
+		},							\
+		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
+		.consumer_supplies = _ldo##_consumers,			\
+	};
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
 
 struct led_info em_x270_led_info = {
 	.name = "em-x270:orange",
 	.default_trigger = "battery-charging-or-full",
 };
 
-struct da903x_subdev_info em_x270_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &ldo3_data,
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &ldo5_data,
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &ldo10_data,
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &ldo12_data,
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &ldo19_data,
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_PC,
-		.platform_data = &em_x270_led_info,
-	}, {
-		.name = "da903x-backlight",
-		.id = DA9030_ID_WLED,
+#define DA9030_SUBDEV(_name, _id, _pdata)	\
+	{					\
+		.name = "da903x-" #_name,	\
+		.id = DA9030_ID_##_id,		\
+		.platform_data = _pdata,	\
 	}
+
+#define DA9030_LDO(num)	DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+	DA9030_LDO(3),
+	DA9030_LDO(5),
+	DA9030_LDO(10),
+	DA9030_LDO(12),
+	DA9030_LDO(19),
+
+	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
 };
 
 static struct da903x_platform_data em_x270_da9030_info = {
-- 
cgit v1.2.3


From 9f055c49c6a1afe6e8b75a2622ac29f3a4290b9d Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:53 +0200
Subject: [ARM] pxa/em-x270: add battery charger

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 46 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 7d056cb2334..20ed10c67c6 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -24,6 +24,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
 
 #include <media/soc_camera.h>
 
@@ -824,6 +826,49 @@ struct led_info em_x270_led_info = {
 	.default_trigger = "battery-charging-or-full",
 };
 
+struct power_supply_info em_x270_psy_info = {
+	.name = "LP555597P6H-FPS",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+	apm_queue_event(APM_LOW_BATTERY);
+}
+
+static void em_x270_battery_critical(void)
+{
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+	.battery_info = &em_x270_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = em_x270_battery_low,
+	.battery_critical = em_x270_battery_critical,
+};
+
 #define DA9030_SUBDEV(_name, _id, _pdata)	\
 	{					\
 		.name = "da903x-" #_name,	\
@@ -842,6 +887,7 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = {
 
 	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
 	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
 };
 
 static struct da903x_platform_data em_x270_da9030_info = {
-- 
cgit v1.2.3


From 4a697e83cf8b20b35942c93b873fe17e54d7e6c5 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:54 +0200
Subject: [ARM] pxa/em-x270: prepare addition of eXeda machine to em-x270.c

Change several GPIO assignment from static to run-time
  Split MFP table to common and EM-X270 specific parts
  Introduce em_x270_module_init

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/em-x270.c | 43 +++++++++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 20ed10c67c6..ea099183773 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -60,7 +60,11 @@
 #define GPIO93_CAM_RESET	(93)
 #define GPIO95_MMC_WP		(95)
 
-static unsigned long em_x270_pin_config[] = {
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
+
+static unsigned long common_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
 	GPIO29_AC97_SDATA_IN_0,
@@ -167,7 +171,6 @@ static unsigned long em_x270_pin_config[] = {
 
 	/* GPIO */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
-	GPIO95_GPIO,				/* MMC Write protect */
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
@@ -176,13 +179,17 @@ static unsigned long em_x270_pin_config[] = {
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO56_GPIO,				/* NAND Ready/Busy */
 
 	/* interrupts */
-	GPIO13_GPIO,	/* MMC card detect */
 	GPIO41_GPIO,	/* DM9000 interrupt */
 };
 
+static unsigned long em_x270_pin_config[] = {
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO56_GPIO,	/* NAND Ready/Busy */
+	GPIO95_GPIO,	/* MMC Write protect */
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
@@ -203,7 +210,7 @@ static struct resource em_x270_dm9000_resource[] = {
 };
 
 static struct dm9000_plat_data em_x270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
+	.flags		= DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device em_x270_dm9000 = {
@@ -218,6 +225,7 @@ static struct platform_device em_x270_dm9000 = {
 
 static void __init em_x270_init_dm9000(void)
 {
+	em_x270_dm9000_platdata.flags |= dm9000_flags;
 	platform_device_register(&em_x270_dm9000);
 }
 #else
@@ -307,7 +315,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return gpio_get_value(GPIO56_NAND_RB);
+	return gpio_get_value(nand_rb);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -372,14 +380,14 @@ static void __init em_x270_init_nand(void)
 
 	gpio_direction_output(GPIO11_NAND_CS, 1);
 
-	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	err = gpio_request(nand_rb, "NAND R/B");
 	if (err) {
 		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
 		gpio_free(GPIO11_NAND_CS);
 		return;
 	}
 
-	gpio_direction_input(GPIO56_NAND_RB);
+	gpio_direction_input(nand_rb);
 
 	platform_device_register(&em_x270_nand);
 }
@@ -483,7 +491,7 @@ static int em_x270_mci_init(struct device *dev,
 		return PTR_ERR(em_x270_sdio_ldo);
 	}
 
-	err = request_irq(gpio_to_irq(GPIO13_MMC_CD), em_x270_detect_int,
+	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
 			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
 			      IRQF_TRIGGER_FALLING,
 			      "MMC card detect", data);
@@ -503,7 +511,7 @@ static int em_x270_mci_init(struct device *dev,
 	return 0;
 
 err_gpio_wp:
-	free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+	free_irq(gpio_to_irq(mmc_cd), data);
 err_irq:
 	regulator_put(em_x270_sdio_ldo);
 
@@ -526,7 +534,7 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+	free_irq(gpio_to_irq(mmc_cd), data);
 }
 
 static int em_x270_mci_get_ro(struct device *dev)
@@ -911,10 +919,21 @@ static void __init em_x270_init_da9030(void)
 	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
 }
 
-static void __init em_x270_init(void)
+static void __init em_x270_module_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
+	mmc_cd = GPIO13_MMC_CD;
+	nand_rb = GPIO56_NAND_RB;
+	dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	em_x270_module_init();
+
 	em_x270_init_da9030();
 	em_x270_init_dm9000();
 	em_x270_init_rtc();
-- 
cgit v1.2.3


From 7f14a78713e0b4517f785402accaccca22df93c1 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:55 +0200
Subject: [ARM] pxa: add eXeda platform support

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig   |   4 ++
 arch/arm/mach-pxa/em-x270.c | 149 +++++++++++++++++++++++++++++++++++++-------
 2 files changed, 132 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a2ed2aa731b..ffd28e48d75 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -254,6 +254,10 @@ config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
 
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
 config MACH_COLIBRI
 	bool "Toradex Colibri PX27x"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index ea099183773..9f15a7c9cc5 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -11,6 +11,7 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
@@ -47,18 +48,21 @@
 #include "generic.h"
 #include "devices.h"
 
-/* GPIO IRQ usage */
-#define GPIO41_ETHIRQ		(41)
+/* EM-X270 specific GPIOs */
 #define GPIO13_MMC_CD		(13)
-#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define GPIO95_MMC_WP		(95)
+#define GPIO56_NAND_RB		(56)
 
-/* NAND control GPIOs */
-#define GPIO11_NAND_CS	(11)
-#define GPIO56_NAND_RB	(56)
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD		(114)
+#define GPIO20_NAND_RB		(20)
+#define GPIO38_SD_PWEN		(38)
 
-/* Miscelaneous GPIOs */
+/* common  GPIOs */
+#define GPIO11_NAND_CS		(11)
 #define GPIO93_CAM_RESET	(93)
-#define GPIO95_MMC_WP		(95)
+#define GPIO41_ETHIRQ		(41)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
 
 static int mmc_cd;
 static int nand_rb;
@@ -190,6 +194,12 @@ static unsigned long em_x270_pin_config[] = {
 	GPIO95_GPIO,	/* MMC Write protect */
 };
 
+static unsigned long exeda_pin_config[] = {
+	GPIO20_GPIO,				/* NAND Ready/Busy */
+	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO114_GPIO,				/* MMC card detect */
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
@@ -500,14 +510,24 @@ static int em_x270_mci_init(struct device *dev,
 		goto err_irq;
 	}
 
-	err = gpio_request(GPIO95_MMC_WP, "MMC WP");
-	if (err) {
-		dev_err(dev, "can't request MMC write protect: %d\n", err);
-		goto err_gpio_wp;
+	if (machine_is_em_x270()) {
+		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+		if (err) {
+			dev_err(dev, "can't request MMC write protect: %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_input(GPIO95_MMC_WP);
+	} else {
+		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+		if (err) {
+			dev_err(dev, "can't request MMC power control : %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_output(GPIO38_SD_PWEN, 1);
 	}
 
-	gpio_direction_input(GPIO95_MMC_WP);
-
 	return 0;
 
 err_gpio_wp:
@@ -535,6 +555,12 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(gpio_to_irq(mmc_cd), data);
+	regulator_put(em_x270_sdio_ldo);
+
+	if (machine_is_em_x270())
+		gpio_free(GPIO95_MMC_WP);
+	else
+		gpio_free(GPIO38_SD_PWEN);
 }
 
 static int em_x270_mci_get_ro(struct device *dev)
@@ -549,12 +575,14 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 			  MMC_VDD_30_31|MMC_VDD_31_32,
 	.init 		= em_x270_mci_init,
 	.setpower 	= em_x270_mci_setpower,
-	.get_ro		= em_x270_mci_get_ro,
 	.exit		= em_x270_mci_exit,
 };
 
 static void __init em_x270_init_mmc(void)
 {
+	if (machine_is_em_x270())
+		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
 	em_x270_mci_platform_data.detect_delay	= msecs_to_jiffies(250);
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
@@ -651,23 +679,76 @@ static inline void em_x270_init_ac97(void) {}
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_matrix_keys[] = {
+static unsigned int em_x270_module_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
 };
 
-struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 3,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+	.matrix_key_map		= em_x270_module_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+static unsigned int em_x270_exeda_matrix_keys[] = {
+	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+	KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+	KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+	KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+	KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+	KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+	KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+	KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+	KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+	KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+	KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+	KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+	KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+	KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+	KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+	KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+	KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+	KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+	KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+	KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+	KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+	KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+	KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+	KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+	KEY(7, 4, 0), KEY(7, 5, 0),
+	KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= em_x270_exeda_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
 };
 
 static void __init em_x270_init_keypad(void)
 {
-	pxa_set_keypad_info(&em_x270_keypad_info);
+	if (machine_is_em_x270())
+		pxa_set_keypad_info(&em_x270_module_keypad_info);
+	else
+		pxa_set_keypad_info(&em_x270_exeda_keypad_info);
 }
 #else
 static inline void em_x270_init_keypad(void) {}
@@ -921,6 +1002,7 @@ static void __init em_x270_init_da9030(void)
 
 static void __init em_x270_module_init(void)
 {
+	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
 	mmc_cd = GPIO13_MMC_CD;
@@ -928,11 +1010,26 @@ static void __init em_x270_module_init(void)
 	dm9000_flags = DM9000_PLATF_32BITONLY;
 }
 
+static void __init em_x270_exeda_init(void)
+{
+	pr_info("%s\n", __func__);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+	mmc_cd = GPIO114_MMC_CD;
+	nand_rb = GPIO20_NAND_RB;
+	dm9000_flags = DM9000_PLATF_16BITONLY;
+}
+
 static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
-	em_x270_module_init();
+	if (machine_is_em_x270())
+		em_x270_module_init();
+	else if (machine_is_exeda())
+		em_x270_exeda_init();
+	else
+		panic("Unsupported machine: %d\n", machine_arch_type);
 
 	em_x270_init_da9030();
 	em_x270_init_dm9000();
@@ -958,3 +1055,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
 MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= em_x270_init,
+MACHINE_END
-- 
cgit v1.2.3


From 6e39759d456e502f91c6a7ff669f28d6e50437f1 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:57 +0200
Subject: [ARM] pxa: prepare xm_x2xx_defconfig for split

xm_x2xx_defconfig currently supports 3 platforms: CM-X255, CM-X270 and
EM-X270. Although EM-X270 is similar to CM-X2XX, it has a lot of unique
features. Keeping these features in the same _defconfig increases the
kernel size in the way it does not fit into CM-X2XX NOR flash.
Rename xm_x2xx_defconfig to cm_x2xx_defconfig and remove EM-X270 specifc
parts from it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/cm_x2xx_defconfig | 1962 ++++++++++++++++++++++++++++++++++++
 arch/arm/configs/xm_x2xx_defconfig | 1952 -----------------------------------
 2 files changed, 1962 insertions(+), 1952 deletions(-)
 create mode 100644 arch/arm/configs/cm_x2xx_defconfig
 delete mode 100644 arch/arm/configs/xm_x2xx_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
new file mode 100644
index 00000000000..797b790cba7
--- /dev/null
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -0,0 +1,1962 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb  1 16:31:36 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_HOST_ITE8152=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_ENE_TUNE is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=m
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_CM_X270=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBERTAS_CS is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_UCB1400_CORE=m
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FB_MBX=m
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig
deleted file mode 100644
index 07c3c93754b..00000000000
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ /dev/null
@@ -1,1952 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Wed Dec  3 09:26:16 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_MACH_EM_X270=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
-# CONFIG_YENTA_ENE_TUNE is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_FB_MBX=m
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-CONFIG_LCD_TDO24M=m
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-CONFIG_LEDS_DA903X=m
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_DA903X=m
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 432dc14fa40dea427d9ed476965001a816ff833b Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 2 Feb 2009 08:57:58 +0200
Subject: [ARM] pxa: add em_x270_defconfig for EM-X270 and eXeda machines

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/em_x270_defconfig | 1741 ++++++++++++++++++++++++++++++++++++
 1 file changed, 1741 insertions(+)
 create mode 100644 arch/arm/configs/em_x270_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
new file mode 100644
index 00000000000..1f759601e3b
--- /dev/null
+++ b/arch/arm/configs/em_x270_defconfig
@@ -0,0 +1,1741 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb  1 16:43:31 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_APMPOWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FB_MBX=m
+# CONFIG_FB_MBX_DEBUG is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=0
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From db8ac47cfccaafd3fa4c5c15320809d44f4fcef9 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 15:10:54 +0000
Subject: [ARM] omap: remove VIRTUAL_CLOCK

Nothing tests the clock flags for this bit, so it serves no purpose.
Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.h             | 8 +++-----
 arch/arm/mach-omap2/clock24xx.h         | 2 +-
 arch/arm/plat-omap/include/mach/clock.h | 1 -
 3 files changed, 4 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index c1dcdf18d8d..d4ccba464b4 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -734,7 +734,7 @@ static struct clk mmc2_ck = {
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
 	.parent		= &arm_ck, /* Is smarter alias for */
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
@@ -749,8 +749,7 @@ static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
-			  ALWAYS_ENABLED,
+			  CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED,
 	.parent		= &armxor_ck.clk,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_generic,
@@ -760,8 +759,7 @@ static struct clk i2c_fck = {
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
 	.id		= 1,
-	.flags		= CLOCK_IN_OMAP16XX |
-			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
 			  ALWAYS_ENABLED,
 	.parent		= &armper_ck.clk,
 	.recalc		= &followparent_recalc,
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index ad6d98d177c..8c57a2e180f 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -2629,7 +2629,7 @@ static struct clk mmchsdb2_fck = {
 static struct clk virt_prcm_set = {
 	.name		= "virt_prcm_set",
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+				ALWAYS_ENABLED | DELAYED_APP,
 	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
 	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
 	.set_rate	= &omap2_select_table_rate,
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 719298554ed..4e8f59df30b 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -125,7 +125,6 @@ extern void clk_enable_init_clocks(void);
 #define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
 #define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
 #define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
 #define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
 #define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
 #define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
-- 
cgit v1.2.3


From 548d849574847b788fe846fe21a41386063be161 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 14:02:46 +0000
Subject: [ARM] omap: introduce clock operations structure

Collect up all the common enable/disable clock operation functions
into a separate operations structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             |  30 ++++++-
 arch/arm/mach-omap1/clock.h             | 152 ++++++++++----------------------
 arch/arm/mach-omap2/clock.c             |   8 +-
 arch/arm/mach-omap2/clock24xx.c         |  16 +++-
 arch/arm/mach-omap2/clock24xx.h         |  13 +--
 arch/arm/mach-omap2/clock34xx.c         |  10 ++-
 arch/arm/mach-omap2/clock34xx.h         |  11 +--
 arch/arm/plat-omap/include/mach/clock.h |   8 +-
 8 files changed, 115 insertions(+), 133 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 5fba2073171..25ef04da6b0 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -26,8 +26,17 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 
+static const struct clkops clkops_generic;
+static const struct clkops clkops_uart;
+static const struct clkops clkops_dspck;
+
 #include "clock.h"
 
+static int omap1_clk_enable_generic(struct clk * clk);
+static int omap1_clk_enable(struct clk *clk);
+static void omap1_clk_disable_generic(struct clk * clk);
+static void omap1_clk_disable(struct clk *clk);
+
 __u32 arm_idlect1_mask;
 
 /*-------------------------------------------------------------------------
@@ -78,6 +87,11 @@ static void omap1_clk_disable_dsp_domain(struct clk *clk)
 	}
 }
 
+static const struct clkops clkops_dspck = {
+	.enable		= &omap1_clk_enable_dsp_domain,
+	.disable	= &omap1_clk_disable_dsp_domain,
+};
+
 static int omap1_clk_enable_uart_functional(struct clk *clk)
 {
 	int ret;
@@ -105,6 +119,11 @@ static void omap1_clk_disable_uart_functional(struct clk *clk)
 	omap1_clk_disable_generic(clk);
 }
 
+static const struct clkops clkops_uart = {
+	.enable		= &omap1_clk_enable_uart_functional,
+	.disable	= &omap1_clk_disable_uart_functional,
+};
+
 static void omap1_clk_allow_idle(struct clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
@@ -468,7 +487,7 @@ static int omap1_clk_enable(struct clk *clk)
 				omap1_clk_deny_idle(clk->parent);
 		}
 
-		ret = clk->enable(clk);
+		ret = clk->ops->enable(clk);
 
 		if (unlikely(ret != 0) && clk->parent) {
 			omap1_clk_disable(clk->parent);
@@ -482,7 +501,7 @@ static int omap1_clk_enable(struct clk *clk)
 static void omap1_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
-		clk->disable(clk);
+		clk->ops->disable(clk);
 		if (likely(clk->parent)) {
 			omap1_clk_disable(clk->parent);
 			if (clk->flags & CLOCK_NO_IDLE_PARENT)
@@ -561,6 +580,11 @@ static void omap1_clk_disable_generic(struct clk *clk)
 	}
 }
 
+static const struct clkops clkops_generic = {
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
@@ -659,7 +683,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 	}
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
-	clk->disable(clk);
+	clk->ops->disable(clk);
 	printk(" done\n");
 }
 
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index d4ccba464b4..5b93a2a897a 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -13,27 +13,19 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
-static int omap1_clk_enable_generic(struct clk * clk);
-static void omap1_clk_disable_generic(struct clk * clk);
 static void omap1_ckctl_recalc(struct clk * clk);
 static void omap1_watchdog_recalc(struct clk * clk);
 static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
 static void omap1_sossi_recalc(struct clk *clk);
 static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
-static int omap1_clk_enable_dsp_domain(struct clk * clk);
 static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static void omap1_clk_disable_dsp_domain(struct clk * clk);
 static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
 static void omap1_uart_recalc(struct clk * clk);
-static int omap1_clk_enable_uart_functional(struct clk * clk);
-static void omap1_clk_disable_uart_functional(struct clk * clk);
 static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
 static void omap1_init_ext_clk(struct clk * clk);
 static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-static int omap1_clk_enable(struct clk *clk);
-static void omap1_clk_disable(struct clk *clk);
 
 struct mpu_rate {
 	unsigned long		rate;
@@ -152,39 +144,37 @@ static struct mpu_rate rate_table[] = {
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
+	.ops		= &clkops_generic,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk ck_dpll1 = {
 	.name		= "ck_dpll1",
+	.ops		= &clkops_generic,
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk ck_dpll1out = {
 	.clk = {
 		.name		= "ck_dpll1out",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
 				  ENABLE_REG_32BIT | RATE_PROPAGATES,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 12,
 };
 
 static struct clk sossi_ck = {
 	.name		= "ck_sossi",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
 			  ENABLE_REG_32BIT,
@@ -192,25 +182,23 @@ static struct clk sossi_ck = {
 	.enable_bit	= 16,
 	.recalc		= &omap1_sossi_recalc,
 	.set_rate	= &omap1_set_sossi_rate,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk arm_ck = {
 	.name		= "arm_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
 			  ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk armper_ck = {
 	.clk = {
 		.name		= "armper_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP310 | RATE_CKCTL |
@@ -219,34 +207,30 @@ static struct arm_idlect1_clk armper_ck = {
 		.enable_bit	= EN_PERCK,
 		.rate_offset	= CKCTL_PERDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 2,
 };
 
 static struct clk arm_gpio_ck = {
 	.name		= "arm_gpio_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.enable_reg	= (void __iomem *)ARM_IDLECT2,
 	.enable_bit	= EN_GPIOCK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk armxor_ck = {
 	.clk = {
 		.name		= "armxor_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 1,
 };
@@ -254,14 +238,13 @@ static struct arm_idlect1_clk armxor_ck = {
 static struct arm_idlect1_clk armtim_ck = {
 	.clk = {
 		.name		= "armtim_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 9,
 };
@@ -269,20 +252,20 @@ static struct arm_idlect1_clk armtim_ck = {
 static struct arm_idlect1_clk armwdt_ck = {
 	.clk = {
 		.name		= "armwdt_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_WDTCK,
 		.recalc		= &omap1_watchdog_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 0,
 };
 
 static struct clk arminth_ck16xx = {
 	.name		= "arminth_ck",
+	.ops		= &clkops_generic,
 	.parent		= &arm_ck,
 	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
@@ -291,12 +274,11 @@ static struct clk arminth_ck16xx = {
 	 *
 	 * 1510 version is in TC clocks.
 	 */
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dsp_ck = {
 	.name		= "dsp_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
@@ -304,23 +286,21 @@ static struct clk dsp_ck = {
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dspper_ck = {
 	.name		= "dspper_ck",
+	.ops		= &clkops_dspck,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
@@ -329,38 +309,35 @@ static struct clk dspper_ck = {
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc_dsp_domain,
 	.set_rate	= &omap1_clk_set_rate_dsp_domain,
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
 };
 
 static struct clk dspxor_ck = {
 	.name		= "dspxor_ck",
+	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
 };
 
 static struct clk dsptim_ck = {
 	.name		= "dsptim_ck",
+	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
 };
 
 /* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
 		.name		= "tc_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
@@ -368,14 +345,13 @@ static struct arm_idlect1_clk tc_ck = {
 				  ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 6,
 };
 
 static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 			  ALWAYS_ENABLED,
@@ -384,86 +360,77 @@ static struct clk arminth_ck1510 = {
 	 *
 	 * 16xx version is in MPU clocks.
 	 */
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "tipb_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk l3_ocpi_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "l3_ocpi_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_IDLECT3,
 	.enable_bit	= EN_OCPI_CK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk tc1_ck = {
 	.name		= "tc1_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_IDLECT3,
 	.enable_bit	= EN_TC1_CK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk tc2_ck = {
 	.name		= "tc2_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_IDLECT3,
 	.enable_bit	= EN_TC2_CK,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dma_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "dma_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk dma_lcdfree_ck = {
 	.name		= "dma_lcdfree_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk api_ck = {
 	.clk = {
 		.name		= "api_ck",
+		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 8,
 };
@@ -471,51 +438,48 @@ static struct arm_idlect1_clk api_ck = {
 static struct arm_idlect1_clk lb_ck = {
 	.clk = {
 		.name		= "lb_ck",
+		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 				  CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 4,
 };
 
 static struct clk rhea1_ck = {
 	.name		= "rhea1_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk rhea2_ck = {
 	.name		= "rhea2_ck",
+	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk lcd_ck_16xx = {
 	.name		= "lcd_ck",
+	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
 	.enable_reg	= (void __iomem *)ARM_IDLECT2,
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct arm_idlect1_clk lcd_ck_1510 = {
 	.clk = {
 		.name		= "lcd_ck",
+		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
@@ -523,14 +487,13 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.enable_bit	= EN_LCDCK,
 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
-		.enable		= &omap1_clk_enable_generic,
-		.disable	= &omap1_clk_disable_generic,
 	},
 	.idlect_shift	= 3,
 };
 
 static struct clk uart1_1510 = {
 	.name		= "uart1_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
@@ -541,13 +504,12 @@ static struct clk uart1_1510 = {
 	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct uart_clk uart1_16xx = {
 	.clk	= {
 		.name		= "uart1_ck",
+		.ops		= &clkops_uart,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
@@ -555,14 +517,13 @@ static struct uart_clk uart1_16xx = {
 				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 		.enable_bit	= 29,
-		.enable		= &omap1_clk_enable_uart_functional,
-		.disable	= &omap1_clk_disable_uart_functional,
 	},
 	.sysc_addr	= 0xfffb0054,
 };
 
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
@@ -573,12 +534,11 @@ static struct clk uart2_ck = {
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk uart3_1510 = {
 	.name		= "uart3_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
@@ -589,13 +549,12 @@ static struct clk uart3_1510 = {
 	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct uart_clk uart3_16xx = {
 	.clk	= {
 		.name		= "uart3_ck",
+		.ops		= &clkops_uart,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
@@ -603,38 +562,35 @@ static struct uart_clk uart3_16xx = {
 				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 		.enable_bit	= 31,
-		.enable		= &omap1_clk_enable_uart_functional,
-		.disable	= &omap1_clk_disable_uart_functional,
 	},
 	.sysc_addr	= 0xfffb9854,
 };
 
 static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.name		= "usb_clko",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
 	.enable_bit	= USB_MCLK_EN_BIT,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk usb_hhc_ck1510 = {
 	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 			  RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk usb_hhc_ck16xx = {
 	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
@@ -642,34 +598,31 @@ static struct clk usb_hhc_ck16xx = {
 			  RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
 	.enable_bit	= 8 /* UHOST_EN */,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk usb_dc_ck = {
 	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
 	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
 	.enable_bit	= 4,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mclk_1510 = {
 	.name		= "mclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
  	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
  	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
  	.enable_bit	= 6,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mclk_16xx = {
 	.name		= "mclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
@@ -677,21 +630,19 @@ static struct clk mclk_16xx = {
 	.set_rate	= &omap1_set_ext_clk_rate,
 	.round_rate	= &omap1_round_ext_clk_rate,
 	.init		= &omap1_init_ext_clk,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk bclk_1510 = {
 	.name		= "bclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk bclk_16xx = {
 	.name		= "bclk",
+	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
@@ -699,12 +650,11 @@ static struct clk bclk_16xx = {
 	.set_rate	= &omap1_set_ext_clk_rate,
 	.round_rate	= &omap1_round_ext_clk_rate,
 	.init		= &omap1_init_ext_clk,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mmc1_ck = {
 	.name		= "mmc_ck",
+	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
@@ -713,13 +663,12 @@ static struct clk mmc1_ck = {
 			  CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 23,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk mmc2_ck = {
 	.name		= "mmc_ck",
 	.id		= 1,
+	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
@@ -727,20 +676,17 @@ static struct clk mmc2_ck = {
 			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 20,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
+	.ops		= &clkops_generic,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
 	.parent		= &arm_ck, /* Is smarter alias for */
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
 	.round_rate	= &omap1_round_to_table_rate,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
@@ -748,23 +694,21 @@ remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
+	.ops		= &clkops_generic,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED,
 	.parent		= &armxor_ck.clk,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
 	.id		= 1,
+	.ops		= &clkops_generic,
 	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
 			  ALWAYS_ENABLED,
 	.parent		= &armper_ck.clk,
 	.recalc		= &followparent_recalc,
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
 };
 
 static struct clk * onchip_clks[] = {
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ad721e0cbf7..d3213f565d5 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -274,8 +274,8 @@ int _omap2_clk_enable(struct clk *clk)
 	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return 0;
 
-	if (clk->enable)
-		return clk->enable(clk);
+	if (clk->ops && clk->ops->enable)
+		return clk->ops->enable(clk);
 
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
@@ -304,8 +304,8 @@ void _omap2_clk_disable(struct clk *clk)
 	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return;
 
-	if (clk->disable) {
-		clk->disable(clk);
+	if (clk->ops && clk->ops->disable) {
+		clk->ops->disable(clk);
 		return;
 	}
 
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index d382eb0184a..866a618c4d8 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -34,12 +34,16 @@
 
 #include "memory.h"
 #include "clock.h"
-#include "clock24xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 
+static const struct clkops clkops_oscck;
+static const struct clkops clkops_fixed;
+
+#include "clock24xx.h"
+
 /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
 #define EN_APLL_STOPPED			0
 #define EN_APLL_LOCKED			3
@@ -96,6 +100,11 @@ static void omap2_disable_osc_ck(struct clk *clk)
 		      OMAP24XX_PRCM_CLKSRC_CTRL);
 }
 
+static const struct clkops clkops_oscck = {
+	.enable		= &omap2_enable_osc_ck,
+	.disable	= &omap2_disable_osc_ck,
+};
+
 #ifdef OLD_CK
 /* Recalculate SYST_CLK */
 static void omap2_sys_clk_recalc(struct clk * clk)
@@ -149,6 +158,11 @@ static void omap2_clk_fixed_disable(struct clk *clk)
 	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 }
 
+static const struct clkops clkops_fixed = {
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+};
+
 /*
  * Uses the current prcm set to tell if a rate is valid.
  * You can go slower, but not faster within a given rate set.
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 8c57a2e180f..2aa0b5e6560 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -31,10 +31,6 @@ static void omap2_sys_clk_recalc(struct clk *clk);
 static void omap2_osc_clk_recalc(struct clk *clk);
 static void omap2_sys_clk_recalc(struct clk *clk);
 static void omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_clk_fixed_enable(struct clk *clk);
-static void omap2_clk_fixed_disable(struct clk *clk);
-static int omap2_enable_osc_ck(struct clk *clk);
-static void omap2_disable_osc_ck(struct clk *clk);
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
@@ -633,11 +629,10 @@ static struct clk func_32k_ck = {
 /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
 static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
+	.ops		= &clkops_oscck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
-	.enable		= &omap2_enable_osc_ck,
-	.disable	= &omap2_disable_osc_ck,
 	.recalc		= &omap2_osc_clk_recalc,
 };
 
@@ -695,6 +690,7 @@ static struct clk dpll_ck = {
 
 static struct clk apll96_ck = {
 	.name		= "apll96_ck",
+	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
@@ -702,13 +698,12 @@ static struct clk apll96_ck = {
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
-	.enable		= &omap2_clk_fixed_enable,
-	.disable	= &omap2_clk_fixed_disable,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk apll54_ck = {
 	.name		= "apll54_ck",
+	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
@@ -716,8 +711,6 @@ static struct clk apll54_ck = {
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
-	.enable		= &omap2_clk_fixed_enable,
-	.disable	= &omap2_clk_fixed_disable,
 	.recalc		= &propagate_rate,
 };
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 31bb7010bd4..2f2d43db2dd 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -33,12 +33,15 @@
 
 #include "memory.h"
 #include "clock.h"
-#include "clock34xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
+static const struct clkops clkops_noncore_dpll_ops;
+
+#include "clock34xx.h"
+
 /* CM_AUTOIDLE_PLL*.AUTO_* bit values */
 #define DPLL_AUTOIDLE_DISABLE			0x0
 #define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
@@ -270,6 +273,11 @@ static void omap3_noncore_dpll_disable(struct clk *clk)
 	_omap3_noncore_dpll_stop(clk);
 }
 
+static const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+};
+
 /**
  * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
  * @clk: struct clk * of the DPLL to read
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index a826094d89b..8b188fb9bea 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -32,8 +32,6 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
 static void omap3_dpll_deny_idle(struct clk *clk);
 static u32 omap3_dpll_autoidle_read(struct clk *clk);
-static int omap3_noncore_dpll_enable(struct clk *clk);
-static void omap3_noncore_dpll_disable(struct clk *clk);
 
 /* Maximum DPLL multiplier, divider values for OMAP3 */
 #define OMAP3_MAX_DPLL_MULT		2048
@@ -347,11 +345,10 @@ static struct dpll_data dpll2_dd = {
 
 static struct clk dpll2_ck = {
 	.name		= "dpll2_ck",
+	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -582,11 +579,10 @@ static struct dpll_data dpll4_dd = {
 
 static struct clk dpll4_ck = {
 	.name		= "dpll4_ck",
+	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -884,11 +880,10 @@ static struct dpll_data dpll5_dd = {
 
 static struct clk dpll5_ck = {
 	.name		= "dpll5_ck",
+	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
 	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 4e8f59df30b..4fe5084e8cc 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -17,6 +17,11 @@ struct module;
 struct clk;
 struct clockdomain;
 
+struct clkops {
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+};
+
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
 struct clksel_rate {
@@ -59,6 +64,7 @@ struct dpll_data {
 
 struct clk {
 	struct list_head	node;
+	const struct clkops	*ops;
 	struct module		*owner;
 	const char		*name;
 	int			id;
@@ -72,8 +78,6 @@ struct clk {
 	int			(*set_rate)(struct clk *, unsigned long);
 	long			(*round_rate)(struct clk *, unsigned long);
 	void			(*init)(struct clk *);
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
-- 
cgit v1.2.3


From e584f559c7b8711cccdf319400acd6294b2c074e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 30 Jan 2009 23:17:23 -0800
Subject: x86/paravirt: don't restore second return reg

Impact: bugfix

In the 32-bit calling convention, %eax:%edx is used to return 64-bit
values.  Don't save and restore %edx around wrapped functions, or they
can't return a full 64-bit result.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index b17365c3974..016dce31130 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1524,8 +1524,8 @@ extern struct paravirt_patch_site __parainstructions[],
 #define PV_RESTORE_REGS "popl %edx; popl %ecx;"
 
 /* save and restore all caller-save registers, except return value */
-#define PV_SAVE_ALL_CALLER_REGS PV_SAVE_REGS
-#define PV_RESTORE_ALL_CALLER_REGS PV_RESTORE_REGS
+#define PV_SAVE_ALL_CALLER_REGS		"pushl %ecx;"
+#define PV_RESTORE_ALL_CALLER_REGS	"popl  %ecx;"
 
 #define PV_FLAGS_ARG "0"
 #define PV_EXTRA_CLOBBERS
-- 
cgit v1.2.3


From 664c7954721adfc9bd61de6ec78f89f482f1a802 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 30 Jan 2009 23:18:41 -0800
Subject: x86/vmi: fix interrupt enable/disable/save/restore calling
 convention.

Zach says:
> Enable/Disable have no clobbers at all.
> Save clobbers only return value, %eax
> Restore also clobbers nothing.

This is precisely compatible with the calling convention, so we can
just call them directly without wrapping.

(Compile tested only.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/vmi_32.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 1d3302cc2dd..eb9e7347928 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -670,10 +670,11 @@ static inline int __init activate_vmi(void)
 	para_fill(pv_mmu_ops.write_cr2, SetCR2);
 	para_fill(pv_mmu_ops.write_cr3, SetCR3);
 	para_fill(pv_cpu_ops.write_cr4, SetCR4);
-	para_fill(pv_irq_ops.save_fl, GetInterruptMask);
-	para_fill(pv_irq_ops.restore_fl, SetInterruptMask);
-	para_fill(pv_irq_ops.irq_disable, DisableInterrupts);
-	para_fill(pv_irq_ops.irq_enable, EnableInterrupts);
+
+	para_fill(pv_irq_ops.save_fl.func, GetInterruptMask);
+	para_fill(pv_irq_ops.restore_fl.func, SetInterruptMask);
+	para_fill(pv_irq_ops.irq_disable.func, DisableInterrupts);
+	para_fill(pv_irq_ops.irq_enable.func, EnableInterrupts);
 
 	para_fill(pv_cpu_ops.wbinvd, WBINVD);
 	para_fill(pv_cpu_ops.read_tsc, RDTSC);
-- 
cgit v1.2.3


From 8d4b4981195849dd50ed94be33ede926c6f41dcd Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 2 Feb 2009 21:48:33 +0530
Subject: headers_check fix: x86, prctl.h

fix the following 'make headers_check' warning:

  usr/include/asm/prctl.h:10: extern's make no sense in userspace

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/x86/include/asm/prctl.h    | 4 ----
 arch/x86/include/asm/syscalls.h | 1 +
 2 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/prctl.h b/arch/x86/include/asm/prctl.h
index a8894647dd9..3ac5032fae0 100644
--- a/arch/x86/include/asm/prctl.h
+++ b/arch/x86/include/asm/prctl.h
@@ -6,8 +6,4 @@
 #define ARCH_GET_FS 0x1003
 #define ARCH_GET_GS 0x1004
 
-#ifdef CONFIG_X86_64
-extern long sys_arch_prctl(int, unsigned long);
-#endif /* CONFIG_X86_64 */
-
 #endif /* _ASM_X86_PRCTL_H */
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index c0b0bda754e..e26d34b0bc7 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -74,6 +74,7 @@ asmlinkage long sys_vfork(struct pt_regs *);
 asmlinkage long sys_execve(char __user *, char __user * __user *,
 			   char __user * __user *,
 			   struct pt_regs *);
+long sys_arch_prctl(int, unsigned long);
 
 /* kernel/ioport.c */
 asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
-- 
cgit v1.2.3


From 15c554439faedfa490389b31db893dc764245e88 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Mon, 2 Feb 2009 21:59:19 +0530
Subject: headers_check fix: x86, setup.h

fix the following 'make headers_check' warning:

  usr/include/asm/setup.h:16: extern's make no sense in userspace
  usr/include/asm/setup.h:17: extern's make no sense in userspace
  usr/include/asm/setup.h:23: extern's make no sense in userspace
  usr/include/asm/setup.h:24: extern's make no sense in userspace
  usr/include/asm/setup.h:51: extern's make no sense in userspace
  usr/include/asm/setup.h:52: extern's make no sense in userspace

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/x86/include/asm/setup.h | 45 ++++++++++++++++++++++----------------------
 1 file changed, 22 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index ebe858cdc8a..5a3a1371575 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -5,23 +5,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* Interrupt control for vSMPowered x86_64 systems */
-void vsmp_init(void);
-
-
-void setup_bios_corruption_check(void);
-
-
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-extern int is_visws_box(void);
-#else
-static inline void visws_early_detect(void) { }
-static inline int is_visws_box(void) { return 0; }
-#endif
-
-extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
-extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
 /*
  * Any setup quirks to be performed?
  */
@@ -48,12 +31,6 @@ struct x86_quirks {
 	int (*update_genapic)(void);
 };
 
-extern struct x86_quirks *x86_quirks;
-extern unsigned long saved_video_mode;
-
-#ifndef CONFIG_PARAVIRT
-#define paravirt_post_allocator_init()	do {} while (0)
-#endif
 #endif /* __ASSEMBLY__ */
 
 #ifdef __KERNEL__
@@ -78,6 +55,28 @@ extern unsigned long saved_video_mode;
 #ifndef __ASSEMBLY__
 #include <asm/bootparam.h>
 
+/* Interrupt control for vSMPowered x86_64 systems */
+void vsmp_init(void);
+
+void setup_bios_corruption_check(void);
+
+#ifdef CONFIG_X86_VISWS
+extern void visws_early_detect(void);
+extern int is_visws_box(void);
+#else
+static inline void visws_early_detect(void) { }
+static inline int is_visws_box(void) { return 0; }
+#endif
+
+extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
+extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
+extern struct x86_quirks *x86_quirks;
+extern unsigned long saved_video_mode;
+
+#ifndef CONFIG_PARAVIRT
+#define paravirt_post_allocator_init()	do {} while (0)
+#endif
+
 #ifndef _SETUP
 
 /*
-- 
cgit v1.2.3


From 3bd323a1da42525317e2ce6c93b97b5ba653bc9d Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Mon, 2 Feb 2009 14:52:00 -0800
Subject: x86 setup: a20: early timeout for a nonexistent keyboard controller

When probing the keyboard controller to enable A20, if we get FF back
(which is *possible* as a valid status word, but is extremely
unlikely) then bail after much fewer iterations than we otherwise
would, and abort the attempt to access the KBC.

This hopefully should make it work a lot better for embedded platforms
which don't have a KBC and where the BIOS doesn't implement
INT 15h AX=2401h (and doesn't boot with A20 already enabled.)

If this works, it will be the one remaining use of CONFIG_X86_ELAN as
anything other than a processor type optimization option.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/boot/a20.c | 75 +++++++++++++++++++++++++++++------------------------
 1 file changed, 41 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index 4063d630def..fba8e9c6a50 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -15,16 +16,23 @@
 #include "boot.h"
 
 #define MAX_8042_LOOPS	100000
+#define MAX_8042_FF	32
 
 static int empty_8042(void)
 {
 	u8 status;
 	int loops = MAX_8042_LOOPS;
+	int ffs   = MAX_8042_FF;
 
 	while (loops--) {
 		io_delay();
 
 		status = inb(0x64);
+		if (status == 0xff) {
+			/* FF is a plausible, but very unlikely status */
+			if (!--ffs)
+				return -1; /* Assume no KBC present */
+		}
 		if (status & 1) {
 			/* Read and discard input data */
 			io_delay();
@@ -118,44 +126,43 @@ static void enable_a20_fast(void)
 
 int enable_a20(void)
 {
-#if defined(CONFIG_X86_ELAN)
-	/* Elan croaks if we try to touch the KBC */
-	enable_a20_fast();
-	while (!a20_test_long())
-		;
-	return 0;
-#elif defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_VOYAGER
 	/* On Voyager, a20_test() is unsafe? */
 	enable_a20_kbc();
 	return 0;
 #else
        int loops = A20_ENABLE_LOOPS;
-	while (loops--) {
-		/* First, check to see if A20 is already enabled
-		   (legacy free, etc.) */
-		if (a20_test_short())
-			return 0;
-
-		/* Next, try the BIOS (INT 0x15, AX=0x2401) */
-		enable_a20_bios();
-		if (a20_test_short())
-			return 0;
-
-		/* Try enabling A20 through the keyboard controller */
-		empty_8042();
-		if (a20_test_short())
-			return 0; /* BIOS worked, but with delayed reaction */
-
-		enable_a20_kbc();
-		if (a20_test_long())
-			return 0;
-
-		/* Finally, try enabling the "fast A20 gate" */
-		enable_a20_fast();
-		if (a20_test_long())
-			return 0;
-	}
-
-	return -1;
+       int kbc_err;
+
+       while (loops--) {
+	       /* First, check to see if A20 is already enabled
+		  (legacy free, etc.) */
+	       if (a20_test_short())
+		       return 0;
+	       
+	       /* Next, try the BIOS (INT 0x15, AX=0x2401) */
+	       enable_a20_bios();
+	       if (a20_test_short())
+		       return 0;
+	       
+	       /* Try enabling A20 through the keyboard controller */
+	       kbc_err = empty_8042();
+
+	       if (a20_test_short())
+		       return 0; /* BIOS worked, but with delayed reaction */
+	
+	       if (!kbc_err) {
+		       enable_a20_kbc();
+		       if (a20_test_long())
+			       return 0;
+	       }
+	       
+	       /* Finally, try enabling the "fast A20 gate" */
+	       enable_a20_fast();
+	       if (a20_test_long())
+		       return 0;
+       }
+       
+       return -1;
 #endif
 }
-- 
cgit v1.2.3


From ef3892bd63420380d115f755d351d2071f1f805f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 2 Feb 2009 18:16:19 -0800
Subject: x86, percpu: fix kexec with vmlinux

Impact: fix regression with kexec with vmlinux

Split data.init into data.init, percpu, data.init2 sections
instead of let data.init wrap percpu secion.

Thus kexec loading will be happy, because sections will not
overlap.

Before the patch we have:

Elf file type is EXEC (Executable file)
Entry point 0x200000
There are 6 program headers, starting at offset 64

Program Headers:
  Type           Offset             VirtAddr           PhysAddr
                 FileSiz            MemSiz              Flags  Align
  LOAD           0x0000000000200000 0xffffffff80200000 0x0000000000200000
                 0x0000000000ca6000 0x0000000000ca6000  R E    200000
  LOAD           0x0000000000ea6000 0xffffffff80ea6000 0x0000000000ea6000
                 0x000000000014dfe0 0x000000000014dfe0  RWE    200000
  LOAD           0x0000000001000000 0xffffffffff600000 0x0000000000ff4000
                 0x0000000000000888 0x0000000000000888  RWE    200000
  LOAD           0x00000000011f6000 0xffffffff80ff6000 0x0000000000ff6000
                 0x0000000000073086 0x0000000000a2d938  RWE    200000
  LOAD           0x0000000001400000 0x0000000000000000 0x000000000106a000
                 0x00000000001d2ce0 0x00000000001d2ce0  RWE    200000
  NOTE           0x00000000009e2c1c 0xffffffff809e2c1c 0x00000000009e2c1c
                 0x0000000000000024 0x0000000000000024         4

 Section to Segment mapping:
  Segment Sections...
   00     .text .notes __ex_table .rodata __bug_table .pci_fixup .builtin_fw __ksymtab __ksymtab_gpl __ksymtab_strings __init_rodata __param
   01     .data .init.rodata .data.cacheline_aligned .data.read_mostly
   02     .vsyscall_0 .vsyscall_fn .vsyscall_gtod_data .vsyscall_1 .vsyscall_2 .vgetcpu_mode .jiffies
   03     .data.init_task .smp_locks .init.text .init.data .init.setup .initcall.init .con_initcall.init .x86_cpu_dev.init .altinstructions .altinstr_replacement .exit.text .init.ramfs .bss
   04     .data.percpu
   05     .notes

After patch we've got:

Elf file type is EXEC (Executable file)
Entry point 0x200000
There are 7 program headers, starting at offset 64

Program Headers:
  Type           Offset             VirtAddr           PhysAddr
                 FileSiz            MemSiz              Flags  Align
  LOAD           0x0000000000200000 0xffffffff80200000 0x0000000000200000
                 0x0000000000ca6000 0x0000000000ca6000  R E    200000
  LOAD           0x0000000000ea6000 0xffffffff80ea6000 0x0000000000ea6000
                 0x000000000014dfe0 0x000000000014dfe0  RWE    200000
  LOAD           0x0000000001000000 0xffffffffff600000 0x0000000000ff4000
                 0x0000000000000888 0x0000000000000888  RWE    200000
  LOAD           0x00000000011f6000 0xffffffff80ff6000 0x0000000000ff6000
                 0x0000000000073086 0x0000000000073086  RWE    200000
  LOAD           0x0000000001400000 0x0000000000000000 0x000000000106a000
                 0x00000000001d2ce0 0x00000000001d2ce0  RWE    200000
  LOAD           0x000000000163d000 0xffffffff8123d000 0x000000000123d000
                 0x0000000000000000 0x00000000007e6938  RWE    200000
  NOTE           0x00000000009e2c1c 0xffffffff809e2c1c 0x00000000009e2c1c
                 0x0000000000000024 0x0000000000000024         4

 Section to Segment mapping:
  Segment Sections...
   00     .text .notes __ex_table .rodata __bug_table .pci_fixup .builtin_fw __ksymtab __ksymtab_gpl __ksymtab_strings __init_rodata __param
   01     .data .init.rodata .data.cacheline_aligned .data.read_mostly
   02     .vsyscall_0 .vsyscall_fn .vsyscall_gtod_data .vsyscall_1 .vsyscall_2 .vgetcpu_mode .jiffies
   03     .data.init_task .smp_locks .init.text .init.data .init.setup .initcall.init .con_initcall.init .x86_cpu_dev.init .altinstructions .altinstr_replacement .exit.text .init.ramfs
   04     .data.percpu
   05     .bss
   06     .notes

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmlinux_64.lds.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index c9740996430..07f62d287ff 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -22,6 +22,7 @@ PHDRS {
 #ifdef CONFIG_SMP
 	percpu PT_LOAD FLAGS(7);	/* RWE */
 #endif
+	data.init2 PT_LOAD FLAGS(7);	/* RWE */
 	note PT_NOTE FLAGS(0);	/* ___ */
 }
 SECTIONS
@@ -215,7 +216,7 @@ SECTIONS
   /*
    * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
    * output PHDR, so the next output section - __data_nosave - should
-   * switch it back to data.init.  Also, pda should be at the head of
+   * start another section data.init2.  Also, pda should be at the head of
    * percpu area.  Preallocate it and define the percpu offset symbol
    * so that it can be accessed as a percpu variable.
    */
@@ -232,7 +233,7 @@ SECTIONS
   __nosave_begin = .;
   .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
       *(.data.nosave)
-  } :data.init	/* switch back to data.init, see PERCPU_VADDR() above */
+  } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */
   . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
-- 
cgit v1.2.3


From 063f8913afb48842b9329e195d90d2c28e58aacc Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 3 Feb 2009 18:02:36 +0100
Subject: x86: document 64-bit and 32-bit function call convention ABI

- also clean up the calling.h file a tiny bit

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/calling.h | 56 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 53 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h
index 2bc162e0ec6..0e63c9a2a8d 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/include/asm/calling.h
@@ -1,5 +1,55 @@
 /*
- * Some macros to handle stack frames in assembly.
+
+ x86 function call convention, 64-bit:
+ -------------------------------------
+  arguments           |  callee-saved      | extra caller-saved | return
+ [callee-clobbered]   |                    | [callee-clobbered] |
+ ---------------------------------------------------------------------------
+ rdi rsi rdx rcx r8-9 | rbx rbp [*] r12-15 | r10-11             | rax, rdx [**]
+
+ ( rsp is obviously invariant across normal function calls. (gcc can 'merge'
+   functions when it sees tail-call optimization possibilities) rflags is
+   clobbered. Leftover arguments are passed over the stack frame.)
+
+ [*]  In the frame-pointers case rbp is fixed to the stack frame.
+
+ [**] for struct return values wider than 64 bits the return convention is a
+      bit more complex: up to 128 bits width we return small structures
+      straight in rax, rdx. For structures larger than that (3 words or
+      larger) the caller puts a pointer to an on-stack return struct
+      [allocated in the caller's stack frame] into the first argument - i.e.
+      into rdi. All other arguments shift up by one in this case.
+      Fortunately this case is rare in the kernel.
+
+For 32-bit we have the following conventions - kernel is built with
+-mregparm=3 and -freg-struct-return:
+
+ x86 function calling convention, 32-bit:
+ ----------------------------------------
+  arguments         | callee-saved        | extra caller-saved | return
+ [callee-clobbered] |                     | [callee-clobbered] |
+ -------------------------------------------------------------------------
+ eax edx ecx        | ebx edi esi ebp [*] | <none>             | eax, edx [**]
+
+ ( here too esp is obviously invariant across normal function calls. eflags
+   is clobbered. Leftover arguments are passed over the stack frame. )
+
+ [*]  In the frame-pointers case ebp is fixed to the stack frame.
+
+ [**] We build with -freg-struct-return, which on 32-bit means similar
+      semantics as on 64-bit: edx can be used for a second return value
+      (i.e. covering integer and structure sizes up to 64 bits) - after that
+      it gets more complex and more expensive: 3-word or larger struct returns
+      get done in the caller's frame and the pointer to the return struct goes
+      into regparm0, i.e. eax - the other arguments shift up and the
+      function's register parameters degenerate to regparm=2 in essence.
+
+*/
+
+
+/*
+ * 64-bit system call stack frame layout defines and helpers,
+ * for assembly code:
  */
 
 #define R15		  0
@@ -9,7 +59,7 @@
 #define RBP		 32
 #define RBX		 40
 
-/* arguments: interrupts/non tracing syscalls only save upto here*/
+/* arguments: interrupts/non tracing syscalls only save up to here: */
 #define R11		 48
 #define R10		 56
 #define R9		 64
@@ -22,7 +72,7 @@
 #define ORIG_RAX	120       /* + error_code */
 /* end of arguments */
 
-/* cpu exception frame or undefined in case of fast syscall. */
+/* cpu exception frame or undefined in case of fast syscall: */
 #define RIP		128
 #define CS		136
 #define EFLAGS		144
-- 
cgit v1.2.3


From 0eb592dbba40baebec9cdde3ff4574185de6cbcc Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Tue, 3 Feb 2009 16:00:38 -0800
Subject: x86/paravirt: return full 64-bit result

Impact: Bug fix

A hunk went missing in the original patch, and callee-save callsites were
not marked as returning the upper 32-bit of result, causing Badness.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/paravirt.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 016dce31130..c85e7475e17 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -522,7 +522,7 @@ int paravirt_disable_iospace(void);
 					"=c" (__ecx)
 #define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
 
-#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax)
+#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
 #define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
 
 #define EXTRA_CLOBBERS
-- 
cgit v1.2.3


From f5deb79679af6eb41b61112fadcda28b2a4cfb0d Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Tue, 3 Feb 2009 14:22:48 +0800
Subject: x86: kexec: Use one page table in x86_64 machine_kexec

Impact: reduce kernel BSS size by 7 pages, improve code readability

Two page tables are used in current x86_64 kexec implementation. One
is used to jump from kernel virtual address to identity map address,
the other is used to map all physical memory. In fact, on x86_64,
there is no conflict between kernel virtual address space and physical
memory space, so just one page table is sufficient. The page table
pages used to map control page are dynamically allocated to save
memory if kexec image is not loaded. ASM code used to map control page
is replaced by C code too.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/kexec.h         |  27 +++-----
 arch/x86/kernel/machine_kexec_64.c   |  82 +++++++++++++++--------
 arch/x86/kernel/relocate_kernel_64.S | 125 +----------------------------------
 3 files changed, 67 insertions(+), 167 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index c61d8b2ab8b..0ceb6d19ed3 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -9,23 +9,8 @@
 # define PAGES_NR		4
 #else
 # define PA_CONTROL_PAGE	0
-# define VA_CONTROL_PAGE	1
-# define PA_PGD			2
-# define VA_PGD			3
-# define PA_PUD_0		4
-# define VA_PUD_0		5
-# define PA_PMD_0		6
-# define VA_PMD_0		7
-# define PA_PTE_0		8
-# define VA_PTE_0		9
-# define PA_PUD_1		10
-# define VA_PUD_1		11
-# define PA_PMD_1		12
-# define VA_PMD_1		13
-# define PA_PTE_1		14
-# define VA_PTE_1		15
-# define PA_TABLE_PAGE		16
-# define PAGES_NR		17
+# define PA_TABLE_PAGE		1
+# define PAGES_NR		2
 #endif
 
 #ifdef CONFIG_X86_32
@@ -157,9 +142,9 @@ relocate_kernel(unsigned long indirection_page,
 		unsigned long start_address) ATTRIB_NORET;
 #endif
 
-#ifdef CONFIG_X86_32
 #define ARCH_HAS_KIMAGE_ARCH
 
+#ifdef CONFIG_X86_32
 struct kimage_arch {
 	pgd_t *pgd;
 #ifdef CONFIG_X86_PAE
@@ -169,6 +154,12 @@ struct kimage_arch {
 	pte_t *pte0;
 	pte_t *pte1;
 };
+#else
+struct kimage_arch {
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+};
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index c43caa3a91f..6993d51b7fd 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -18,15 +18,6 @@
 #include <asm/mmu_context.h>
 #include <asm/io.h>
 
-#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
-static u64 kexec_pgd[512] PAGE_ALIGNED;
-static u64 kexec_pud0[512] PAGE_ALIGNED;
-static u64 kexec_pmd0[512] PAGE_ALIGNED;
-static u64 kexec_pte0[512] PAGE_ALIGNED;
-static u64 kexec_pud1[512] PAGE_ALIGNED;
-static u64 kexec_pmd1[512] PAGE_ALIGNED;
-static u64 kexec_pte1[512] PAGE_ALIGNED;
-
 static void init_level2_page(pmd_t *level2p, unsigned long addr)
 {
 	unsigned long end_addr;
@@ -107,12 +98,65 @@ out:
 	return result;
 }
 
+static void free_transition_pgtable(struct kimage *image)
+{
+	free_page((unsigned long)image->arch.pud);
+	free_page((unsigned long)image->arch.pmd);
+	free_page((unsigned long)image->arch.pte);
+}
+
+static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	unsigned long vaddr, paddr;
+	int result = -ENOMEM;
+
+	vaddr = (unsigned long)relocate_kernel;
+	paddr = __pa(page_address(image->control_code_page)+PAGE_SIZE);
+	pgd += pgd_index(vaddr);
+	if (!pgd_present(*pgd)) {
+		pud = (pud_t *)get_zeroed_page(GFP_KERNEL);
+		if (!pud)
+			goto err;
+		image->arch.pud = pud;
+		set_pgd(pgd, __pgd(__pa(pud) | _KERNPG_TABLE));
+	}
+	pud = pud_offset(pgd, vaddr);
+	if (!pud_present(*pud)) {
+		pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL);
+		if (!pmd)
+			goto err;
+		image->arch.pmd = pmd;
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+	}
+	pmd = pmd_offset(pud, vaddr);
+	if (!pmd_present(*pmd)) {
+		pte = (pte_t *)get_zeroed_page(GFP_KERNEL);
+		if (!pte)
+			goto err;
+		image->arch.pte = pte;
+		set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE));
+	}
+	pte = pte_offset_kernel(pmd, vaddr);
+	set_pte(pte, pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL_EXEC));
+	return 0;
+err:
+	free_transition_pgtable(image);
+	return result;
+}
+
 
 static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 {
 	pgd_t *level4p;
+	int result;
 	level4p = (pgd_t *)__va(start_pgtable);
-	return init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
+	result = init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
+	if (result)
+		return result;
+	return init_transition_pgtable(image, level4p);
 }
 
 static void set_idt(void *newidt, u16 limit)
@@ -174,7 +218,7 @@ int machine_kexec_prepare(struct kimage *image)
 
 void machine_kexec_cleanup(struct kimage *image)
 {
-	return;
+	free_transition_pgtable(image);
 }
 
 /*
@@ -195,22 +239,6 @@ void machine_kexec(struct kimage *image)
 	memcpy(control_page, relocate_kernel, PAGE_SIZE);
 
 	page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
-	page_list[PA_PGD] = virt_to_phys(&kexec_pgd);
-	page_list[VA_PGD] = (unsigned long)kexec_pgd;
-	page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0);
-	page_list[VA_PUD_0] = (unsigned long)kexec_pud0;
-	page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0);
-	page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
-	page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0);
-	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
-	page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1);
-	page_list[VA_PUD_1] = (unsigned long)kexec_pud1;
-	page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1);
-	page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
-	page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1);
-	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
-
 	page_list[PA_TABLE_PAGE] =
 	  (unsigned long)__pa(page_address(image->control_code_page));
 
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index f5afe665a82..b0bbdd4829c 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -29,122 +29,6 @@ relocate_kernel:
 	 * %rdx start address
 	 */
 
-	/* map the control page at its virtual address */
-
-	movq	$0x0000ff8000000000, %r10        /* mask */
-	mov	$(39 - 3), %cl                   /* bits to shift */
-	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PGD)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PUD_0)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PUD_0)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PMD_0)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PMD_0)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PTE_0)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PTE_0)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	/* identity map the control page at its physical address */
-
-	movq	$0x0000ff8000000000, %r10        /* mask */
-	mov	$(39 - 3), %cl                   /* bits to shift */
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PGD)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PUD_1)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PUD_1)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PMD_1)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PMD_1)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PTE_1)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PTE_1)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-relocate_new_kernel:
-	/* %rdi indirection_page
-	 * %rsi page_list
-	 * %rdx start address
-	 */
-
 	/* zero out flags, and disable interrupts */
 	pushq $0
 	popfq
@@ -156,9 +40,8 @@ relocate_new_kernel:
 	/* get physical address of page table now too */
 	movq	PTR(PA_TABLE_PAGE)(%rsi), %rcx
 
-	/* switch to new set of page tables */
-	movq	PTR(PA_PGD)(%rsi), %r9
-	movq	%r9, %cr3
+	/* Switch to the identity mapped page tables */
+	movq	%rcx, %cr3
 
 	/* setup a new stack at the end of the physical control page */
 	lea	PAGE_SIZE(%r8), %rsp
@@ -194,9 +77,7 @@ identity_mapped:
 	jmp 1f
 1:
 
-	/* Switch to the identity mapped page tables,
-	 * and flush the TLB.
-	*/
+	/* Flush the TLB (needed?) */
 	movq	%rcx, %cr3
 
 	/* Do the copies */
-- 
cgit v1.2.3


From 508eb2ce222053e51e2243b7add8eeac85b1d250 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 4 Feb 2009 15:28:06 +0900
Subject: sh: Restrict old CMT timer code to SH-2/SH-2A.

None of the other platforms use this, and need individual porting.
Restrict it back to the supported set of CPU subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 50c992444e5..78a01d7d37e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -419,7 +419,7 @@ config SH_TMU
 
 config SH_CMT
 	bool "CMT timer support"
-	depends on SYS_SUPPORTS_CMT
+	depends on SYS_SUPPORTS_CMT && CPU_SH2
 	default y
 	help
 	  This enables the use of the CMT as the system timer.
-- 
cgit v1.2.3


From 0973a06cde8cc1522fbcf2baacb926f1ee3f4c79 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Wed, 4 Feb 2009 15:24:09 -0800
Subject: x86: mm: introduce helper function in fault.c

Impact: cleanup

Introduce helper function fault_in_kernel_address() to make editors happy.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/mm/fault.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index eb4d7fe0593..8e9b0f1fd87 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -775,6 +775,15 @@ static inline int access_error(unsigned long error_code, int write,
 	return 0;
 }
 
+static int fault_in_kernel_space(unsigned long address)
+{
+#ifdef CONFIG_X86_32
+	return address >= TASK_SIZE;
+#else /* !CONFIG_X86_32 */
+	return address >= TASK_SIZE64;
+#endif /* CONFIG_X86_32 */
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -817,11 +826,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 * (error_code & 4) == 0, and that the fault was not a
 	 * protection error (error_code & 9) == 0.
 	 */
-#ifdef CONFIG_X86_32
-	if (unlikely(address >= TASK_SIZE)) {
-#else
-	if (unlikely(address >= TASK_SIZE64)) {
-#endif
+	if (unlikely(fault_in_kernel_space(address))) {
 		if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
 		    vmalloc_fault(address) >= 0)
 			return;
-- 
cgit v1.2.3


From 1f4f931501e9270c156d05ee76b7b872de486304 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 2 Feb 2009 13:58:06 -0800
Subject: xen: fix 32-bit build resulting from mmu move

Moving the mmu code from enlighten.c to mmu.c inadvertently broke the
32-bit build.  Fix it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/xen/mmu.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 5e41f7fc6cf..d2e8ed1aff3 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1396,6 +1396,43 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 #endif
 }
 
+#ifdef CONFIG_HIGHPTE
+static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
+{
+	pgprot_t prot = PAGE_KERNEL;
+
+	if (PagePinned(page))
+		prot = PAGE_KERNEL_RO;
+
+	if (0 && PageHighMem(page))
+		printk("mapping highpte %lx type %d prot %s\n",
+		       page_to_pfn(page), type,
+		       (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ");
+
+	return kmap_atomic_prot(page, type, prot);
+}
+#endif
+
+#ifdef CONFIG_X86_32
+static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
+{
+	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
+	if (pte_val_ma(*ptep) & _PAGE_PRESENT)
+		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
+			       pte_val_ma(pte));
+
+	return pte;
+}
+
+/* Init-time set_pte while constructing initial pagetables, which
+   doesn't allow RO pagetable pages to be remapped RW */
+static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
+{
+	pte = mask_rw_pte(ptep, pte);
+
+	xen_set_pte(ptep, pte);
+}
+#endif
 
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
-- 
cgit v1.2.3


From 383414322b3b3ced0cbc146801e0cc6c60a6c5f4 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 2 Feb 2009 13:55:31 -0800
Subject: xen: setup percpu data pointers

We need to access percpu data fairly early, so set up the percpu
registers as soon as possible.  We only need to load the appropriate
segment register.  We already have a GDT, but its hard to change it
early because we need to manipulate the pagetable to do so, and that
hasn't been set up yet.

Also, set the kernel stack when bringing up secondary CPUs.  If we
don't they all end up sharing the same stack...

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/xen/enlighten.c | 15 ++++++++++++++-
 arch/x86/xen/smp.c       |  6 ++++--
 arch/x86/xen/xen-ops.h   |  2 ++
 3 files changed, 20 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index cd022c43dfb..aed7ceeb4b6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -66,6 +66,8 @@ EXPORT_SYMBOL_GPL(xen_start_info);
 
 struct shared_info xen_dummy_shared_info;
 
+void *xen_initial_gdt;
+
 /*
  * Point at some empty memory to start with. We map the real shared_info
  * page as soon as fixmap is up and running.
@@ -917,8 +919,19 @@ asmlinkage void __init xen_start_kernel(void)
 	have_vcpu_info_placement = 0;
 #endif
 
-	/* setup percpu state */
+#ifdef CONFIG_X86_64
+	/*
+	 * Setup percpu state.  We only need to do this for 64-bit
+	 * because 32-bit already has %fs set properly.
+	 */
 	load_percpu_segment(0);
+#endif
+	/*
+	 * The only reliable way to retain the initial address of the
+	 * percpu gdt_page is to remember it here, so we can go and
+	 * mark it RW later, when the initial percpu area is freed.
+	 */
+	xen_initial_gdt = &per_cpu(gdt_page, 0);
 
 	xen_smp_init();
 
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 88d5d5ec6be..035582ae815 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -170,8 +170,7 @@ static void __init xen_smp_prepare_boot_cpu(void)
 
 	/* We've switched to the "real" per-cpu gdt, so make sure the
 	   old memory can be recycled */
-	make_lowmem_page_readwrite(__per_cpu_load +
-				   (unsigned long)&per_cpu_var(gdt_page));
+	make_lowmem_page_readwrite(xen_initial_gdt);
 
 	xen_setup_vcpu_info_placement();
 }
@@ -287,6 +286,9 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 	irq_ctx_init(cpu);
 #else
 	clear_tsk_thread_flag(idle, TIF_FORK);
+	per_cpu(kernel_stack, cpu) =
+		(unsigned long)task_stack_page(idle) -
+		KERNEL_STACK_OFFSET + THREAD_SIZE;
 #endif
 	xen_setup_timer(cpu);
 	xen_init_lock_cpu(cpu);
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 11913fc94c1..2f5ef2632ea 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -10,6 +10,8 @@
 extern const char xen_hypervisor_callback[];
 extern const char xen_failsafe_callback[];
 
+extern void *xen_initial_gdt;
+
 struct trap_info;
 void xen_copy_trap_info(struct trap_info *traps);
 
-- 
cgit v1.2.3


From 5393744b71ce797f1b1546fafaed127fc50c2b61 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 2 Feb 2009 13:55:42 -0800
Subject: xen: make direct versions of irq_enable/disable/save/restore to
 common code

Now that x86-64 has directly accessible percpu variables, it can also
implement the direct versions of these operations, which operate on a
vcpu_info structure directly embedded in the percpu area.

In fact, the 64-bit versions are more or less identical, and so can be
shared.  The only two differences are:
 1. xen_restore_fl_direct takes its argument in eax on 32-bit, and rdi on 64-bit.
    Unfortunately it isn't possible to directly refer to the 2nd lsb of rdi directly
    (as you can with %ah), so the code isn't quite as dense.
 2. check_events needs to variants to save different registers.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/xen/Makefile     |   3 +-
 arch/x86/xen/xen-asm.S    | 140 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/xen-asm.h    |  12 ++++
 arch/x86/xen/xen-asm_32.S | 111 ++++--------------------------------
 arch/x86/xen/xen-asm_64.S | 134 +-------------------------------------------
 5 files changed, 169 insertions(+), 231 deletions(-)
 create mode 100644 arch/x86/xen/xen-asm.S
 create mode 100644 arch/x86/xen/xen-asm.h

(limited to 'arch')

diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 6dcefba7836..3b767d03fd6 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -6,7 +6,8 @@ CFLAGS_REMOVE_irq.o = -pg
 endif
 
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
-			time.o xen-asm_$(BITS).o grant-table.o suspend.o
+			time.o xen-asm.o xen-asm_$(BITS).o \
+			grant-table.o suspend.o
 
 obj-$(CONFIG_SMP)		+= smp.o spinlock.o
 obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
\ No newline at end of file
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
new file mode 100644
index 00000000000..4c6f9679913
--- /dev/null
+++ b/arch/x86/xen/xen-asm.S
@@ -0,0 +1,140 @@
+/*
+	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+	The inline versions are the same as the direct-use versions, with the
+	pre- and post-amble chopped off.
+
+	This code is encoded for size rather than absolute efficiency,
+	with a view to being able to inline as much as possible.
+
+	We only bother with direct forms (ie, vcpu in percpu data) of
+	the operations here; the indirect forms are better handled in
+	C, since they're generally too large to inline anyway.
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+
+#include "xen-asm.h"
+
+/*
+	Enable events.  This clears the event mask and tests the pending
+	event status with one and operation.  If there are pending
+	events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
+
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
+	jz 1f
+
+2:	call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+	ret
+	ENDPROC(xen_irq_enable_direct)
+	RELOC(xen_irq_enable_direct, 2b+1)
+
+
+/*
+	Disabling events is simply a matter of making the event mask
+	non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
+ENDPATCH(xen_irq_disable_direct)
+	ret
+	ENDPROC(xen_irq_disable_direct)
+	RELOC(xen_irq_disable_direct, 0)
+
+/*
+	(xen_)save_fl is used to get the current interrupt enable status.
+	Callers expect the status to be in X86_EFLAGS_IF, and other bits
+	may be set in the return value.  We take advantage of this by
+	making sure that X86_EFLAGS_IF has the right value (and other bits
+	in that byte are 0), but other bits in the return value are
+	undefined.  We need to toggle the state of the bit, because
+	Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
+	setz %ah
+	addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+	ret
+	ENDPROC(xen_save_fl_direct)
+	RELOC(xen_save_fl_direct, 0)
+
+
+/*
+	In principle the caller should be passing us a value return
+	from xen_save_fl_direct, but for robustness sake we test only
+	the X86_EFLAGS_IF flag rather than the whole byte. After
+	setting the interrupt mask state, it checks for unmasked
+	pending events and enters the hypervisor to get them delivered
+	if so.
+ */
+ENTRY(xen_restore_fl_direct)
+#ifdef CONFIG_X86_64
+	testw $X86_EFLAGS_IF, %di
+#else
+	testb $X86_EFLAGS_IF>>8, %ah
+#endif
+	setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+	ret
+	ENDPROC(xen_restore_fl_direct)
+	RELOC(xen_restore_fl_direct, 2b+1)
+
+
+/*
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
+ */
+check_events:
+#ifdef CONFIG_X86_32
+	push %eax
+	push %ecx
+	push %edx
+	call xen_force_evtchn_callback
+	pop %edx
+	pop %ecx
+	pop %eax
+#else
+	push %rax
+	push %rcx
+	push %rdx
+	push %rsi
+	push %rdi
+	push %r8
+	push %r9
+	push %r10
+	push %r11
+	call xen_force_evtchn_callback
+	pop %r11
+	pop %r10
+	pop %r9
+	pop %r8
+	pop %rdi
+	pop %rsi
+	pop %rdx
+	pop %rcx
+	pop %rax
+#endif
+	ret
+
diff --git a/arch/x86/xen/xen-asm.h b/arch/x86/xen/xen-asm.h
new file mode 100644
index 00000000000..465276467a4
--- /dev/null
+++ b/arch/x86/xen/xen-asm.h
@@ -0,0 +1,12 @@
+#ifndef _XEN_XEN_ASM_H
+#define _XEN_XEN_ASM_H
+
+#include <linux/linkage.h>
+
+#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)	.globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI	0x80000000
+
+#endif
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index 42786f59d9c..082d173caaf 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -11,101 +11,28 @@
 	generally too large to inline anyway.
  */
 
-#include <linux/linkage.h>
-
-#include <asm/asm-offsets.h>
+//#include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/percpu.h>
 #include <asm/processor-flags.h>
 #include <asm/segment.h>
 
 #include <xen/interface/xen.h>
 
-#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
-#define ENDPATCH(x)	.globl x##_end; x##_end=.
-
-/* Pseudo-flag used for virtual NMI, which we don't implement yet */
-#define XEN_EFLAGS_NMI	0x80000000
-
-/*
-	Enable events.  This clears the event mask and tests the pending
-	event status with one and operation.  If there are pending
-	events, then enter the hypervisor to get them handled.
- */
-ENTRY(xen_irq_enable_direct)
-	/* Unmask events */
-	movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
-
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
-
-	/* Test for pending */
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
-	jz 1f
-
-2:	call check_events
-1:
-ENDPATCH(xen_irq_enable_direct)
-	ret
-	ENDPROC(xen_irq_enable_direct)
-	RELOC(xen_irq_enable_direct, 2b+1)
-
+#include "xen-asm.h"
 
 /*
-	Disabling events is simply a matter of making the event mask
-	non-zero.
- */
-ENTRY(xen_irq_disable_direct)
-	movb $1, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
-ENDPATCH(xen_irq_disable_direct)
-	ret
-	ENDPROC(xen_irq_disable_direct)
-	RELOC(xen_irq_disable_direct, 0)
-
-/*
-	(xen_)save_fl is used to get the current interrupt enable status.
-	Callers expect the status to be in X86_EFLAGS_IF, and other bits
-	may be set in the return value.  We take advantage of this by
-	making sure that X86_EFLAGS_IF has the right value (and other bits
-	in that byte are 0), but other bits in the return value are
-	undefined.  We need to toggle the state of the bit, because
-	Xen and x86 use opposite senses (mask vs enable).
- */
-ENTRY(xen_save_fl_direct)
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
-	setz %ah
-	addb %ah,%ah
-ENDPATCH(xen_save_fl_direct)
-	ret
-	ENDPROC(xen_save_fl_direct)
-	RELOC(xen_save_fl_direct, 0)
-
-
-/*
-	In principle the caller should be passing us a value return
-	from xen_save_fl_direct, but for robustness sake we test only
-	the X86_EFLAGS_IF flag rather than the whole byte. After
-	setting the interrupt mask state, it checks for unmasked
-	pending events and enters the hypervisor to get them delivered
-	if so.
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
  */
-ENTRY(xen_restore_fl_direct)
-	testb $X86_EFLAGS_IF>>8, %ah
-	setz PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
-
-	/* check for unmasked and pending */
-	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
-	jz 1f
-2:	call check_events
-1:
-ENDPATCH(xen_restore_fl_direct)
+check_events:
+	push %eax
+	push %ecx
+	push %edx
+	call xen_force_evtchn_callback
+	pop %edx
+	pop %ecx
+	pop %eax
 	ret
-	ENDPROC(xen_restore_fl_direct)
-	RELOC(xen_restore_fl_direct, 2b+1)
 
 /*
 	We can't use sysexit directly, because we're not running in ring0.
@@ -289,17 +216,3 @@ ENTRY(xen_iret_crit_fixup)
 	lea 4(%edi),%esp		/* point esp to new frame */
 2:	jmp xen_do_upcall
 
-
-/*
-	Force an event check by making a hypercall,
-	but preserve regs before making the call.
- */
-check_events:
-	push %eax
-	push %ecx
-	push %edx
-	call xen_force_evtchn_callback
-	pop %edx
-	pop %ecx
-	pop %eax
-	ret
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index d6fc51f4ce8..d205a283efe 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -11,142 +11,14 @@
 	generally too large to inline anyway.
  */
 
-#include <linux/linkage.h>
-
-#include <asm/asm-offsets.h>
-#include <asm/processor-flags.h>
 #include <asm/errno.h>
-#include <asm/segment.h>
 #include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
 
 #include <xen/interface/xen.h>
 
-#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
-#define ENDPATCH(x)	.globl x##_end; x##_end=.
-
-/* Pseudo-flag used for virtual NMI, which we don't implement yet */
-#define XEN_EFLAGS_NMI	0x80000000
-
-#if 1
-/*
-	FIXME: x86_64 now can support direct access to percpu variables
-	via a segment override.  Update xen accordingly.
- */
-#define BUG			ud2a
-#endif
-
-/*
-	Enable events.  This clears the event mask and tests the pending
-	event status with one and operation.  If there are pending
-	events, then enter the hypervisor to get them handled.
- */
-ENTRY(xen_irq_enable_direct)
-	BUG
-
-	/* Unmask events */
-	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
-
-	/* Test for pending */
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
-
-2:	call check_events
-1:
-ENDPATCH(xen_irq_enable_direct)
-	ret
-	ENDPROC(xen_irq_enable_direct)
-	RELOC(xen_irq_enable_direct, 2b+1)
-
-/*
-	Disabling events is simply a matter of making the event mask
-	non-zero.
- */
-ENTRY(xen_irq_disable_direct)
-	BUG
-
-	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-ENDPATCH(xen_irq_disable_direct)
-	ret
-	ENDPROC(xen_irq_disable_direct)
-	RELOC(xen_irq_disable_direct, 0)
-
-/*
-	(xen_)save_fl is used to get the current interrupt enable status.
-	Callers expect the status to be in X86_EFLAGS_IF, and other bits
-	may be set in the return value.  We take advantage of this by
-	making sure that X86_EFLAGS_IF has the right value (and other bits
-	in that byte are 0), but other bits in the return value are
-	undefined.  We need to toggle the state of the bit, because
-	Xen and x86 use opposite senses (mask vs enable).
- */
-ENTRY(xen_save_fl_direct)
-	BUG
-
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-	setz %ah
-	addb %ah,%ah
-ENDPATCH(xen_save_fl_direct)
-	ret
-	ENDPROC(xen_save_fl_direct)
-	RELOC(xen_save_fl_direct, 0)
-
-/*
-	In principle the caller should be passing us a value return
-	from xen_save_fl_direct, but for robustness sake we test only
-	the X86_EFLAGS_IF flag rather than the whole byte. After
-	setting the interrupt mask state, it checks for unmasked
-	pending events and enters the hypervisor to get them delivered
-	if so.
- */
-ENTRY(xen_restore_fl_direct)
-	BUG
-
-	testb $X86_EFLAGS_IF>>8, %ah
-	setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
-
-	/* check for unmasked and pending */
-	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
-2:	call check_events
-1:
-ENDPATCH(xen_restore_fl_direct)
-	ret
-	ENDPROC(xen_restore_fl_direct)
-	RELOC(xen_restore_fl_direct, 2b+1)
-
-
-/*
-	Force an event check by making a hypercall,
-	but preserve regs before making the call.
- */
-check_events:
-	push %rax
-	push %rcx
-	push %rdx
-	push %rsi
-	push %rdi
-	push %r8
-	push %r9
-	push %r10
-	push %r11
-	call xen_force_evtchn_callback
-	pop %r11
-	pop %r10
-	pop %r9
-	pop %r8
-	pop %rdi
-	pop %rsi
-	pop %rdx
-	pop %rcx
-	pop %rax
-	ret
+#include "xen-asm.h"
 
 ENTRY(xen_adjust_exception_frame)
 	mov 8+0(%rsp),%rcx
-- 
cgit v1.2.3


From e4d0407185cdbdcfd99fc23bde2e5454bbc46329 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 2 Feb 2009 13:55:54 -0800
Subject: xen: use direct ops on 64-bit

Enable the use of the direct vcpu-access operations on 64-bit.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/xen/enlighten.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index aed7ceeb4b6..37230342c2c 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -87,14 +87,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement =
-#ifdef CONFIG_X86_32
-	1
-#else
-	0
-#endif
-	;
-
+static int have_vcpu_info_placement = 1;
 
 static void xen_vcpu_setup(int cpu)
 {
@@ -914,11 +907,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_X86_64
-	/* Disable until direct per-cpu data access. */
-	have_vcpu_info_placement = 0;
-#endif
-
 #ifdef CONFIG_X86_64
 	/*
 	 * Setup percpu state.  We only need to do this for 64-bit
-- 
cgit v1.2.3


From 18114f61359ac05e3aa797d53d63f40db41f798d Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 30 Jan 2009 18:16:46 -0800
Subject: x86: uaccess: use errret as error value in __put_user_size()

Impact: cleanup

In __put_user_size() macro errret is used for error value.
But if size is 8, errret isn't passed to__put_user_asm_u64().
This behavior is inconsistent.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/uaccess.h | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index b9a24155f7a..b685ece89d5 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -186,7 +186,7 @@ extern int __get_user_bad(void);
 
 
 #ifdef CONFIG_X86_32
-#define __put_user_asm_u64(x, addr, err)				\
+#define __put_user_asm_u64(x, addr, err, errret)			\
 	asm volatile("1:	movl %%eax,0(%2)\n"			\
 		     "2:	movl %%edx,4(%2)\n"			\
 		     "3:\n"						\
@@ -197,7 +197,7 @@ extern int __get_user_bad(void);
 		     _ASM_EXTABLE(1b, 4b)				\
 		     _ASM_EXTABLE(2b, 4b)				\
 		     : "=r" (err)					\
-		     : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+		     : "A" (x), "r" (addr), "i" (errret), "0" (err))
 
 #define __put_user_asm_ex_u64(x, addr)					\
 	asm volatile("1:	movl %%eax,0(%1)\n"			\
@@ -211,8 +211,8 @@ extern int __get_user_bad(void);
 	asm volatile("call __put_user_8" : "=a" (__ret_pu)	\
 		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
-#define __put_user_asm_u64(x, ptr, retval) \
-	__put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_asm_u64(x, ptr, retval, errret) \
+	__put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
 #define __put_user_asm_ex_u64(x, addr)	\
 	__put_user_asm_ex(x, addr, "q", "", "Zr")
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
@@ -289,7 +289,8 @@ do {									\
 		__put_user_asm(x, ptr, retval, "l", "k", "ir", errret);	\
 		break;							\
 	case 8:								\
-		__put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval);	\
+		__put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval,	\
+				   errret);				\
 		break;							\
 	default:							\
 		__put_user_bad();					\
-- 
cgit v1.2.3


From 130ace11a9dc682541336d1fe5cb3bc7771a149e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 6 Feb 2009 00:57:48 +0900
Subject: x86: style cleanups for xen assemblies

Make the following style cleanups:

* drop unnecessary //#include from xen-asm_32.S
* compulsive adding of space after comma
* reformat multiline comments

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/xen-asm.S    |  78 +++++++--------
 arch/x86/xen/xen-asm_32.S | 238 ++++++++++++++++++++++++----------------------
 arch/x86/xen/xen-asm_64.S | 107 +++++++++++----------
 3 files changed, 219 insertions(+), 204 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 4c6f9679913..79d7362ad6d 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -1,14 +1,14 @@
 /*
-	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
-	The inline versions are the same as the direct-use versions, with the
-	pre- and post-amble chopped off.
-
-	This code is encoded for size rather than absolute efficiency,
-	with a view to being able to inline as much as possible.
-
-	We only bother with direct forms (ie, vcpu in percpu data) of
-	the operations here; the indirect forms are better handled in
-	C, since they're generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining.  The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in percpu data) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
  */
 
 #include <asm/asm-offsets.h>
@@ -18,17 +18,19 @@
 #include "xen-asm.h"
 
 /*
-	Enable events.  This clears the event mask and tests the pending
-	event status with one and operation.  If there are pending
-	events, then enter the hypervisor to get them handled.
+ * Enable events.  This clears the event mask and tests the pending
+ * event status with one and operation.  If there are pending events,
+ * then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
 	/* Unmask events */
 	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
+	/*
+	 * Preempt here doesn't matter because that will deal with any
+	 * pending interrupts.  The pending check may end up being run
+	 * on the wrong CPU, but that doesn't hurt.
+	 */
 
 	/* Test for pending */
 	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
@@ -43,8 +45,8 @@ ENDPATCH(xen_irq_enable_direct)
 
 
 /*
-	Disabling events is simply a matter of making the event mask
-	non-zero.
+ * Disabling events is simply a matter of making the event mask
+ * non-zero.
  */
 ENTRY(xen_irq_disable_direct)
 	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
@@ -54,18 +56,18 @@ ENDPATCH(xen_irq_disable_direct)
 	RELOC(xen_irq_disable_direct, 0)
 
 /*
-	(xen_)save_fl is used to get the current interrupt enable status.
-	Callers expect the status to be in X86_EFLAGS_IF, and other bits
-	may be set in the return value.  We take advantage of this by
-	making sure that X86_EFLAGS_IF has the right value (and other bits
-	in that byte are 0), but other bits in the return value are
-	undefined.  We need to toggle the state of the bit, because
-	Xen and x86 use opposite senses (mask vs enable).
+ * (xen_)save_fl is used to get the current interrupt enable status.
+ * Callers expect the status to be in X86_EFLAGS_IF, and other bits
+ * may be set in the return value.  We take advantage of this by
+ * making sure that X86_EFLAGS_IF has the right value (and other bits
+ * in that byte are 0), but other bits in the return value are
+ * undefined.  We need to toggle the state of the bit, because Xen and
+ * x86 use opposite senses (mask vs enable).
  */
 ENTRY(xen_save_fl_direct)
 	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 	setz %ah
-	addb %ah,%ah
+	addb %ah, %ah
 ENDPATCH(xen_save_fl_direct)
 	ret
 	ENDPROC(xen_save_fl_direct)
@@ -73,12 +75,11 @@ ENDPATCH(xen_save_fl_direct)
 
 
 /*
-	In principle the caller should be passing us a value return
-	from xen_save_fl_direct, but for robustness sake we test only
-	the X86_EFLAGS_IF flag rather than the whole byte. After
-	setting the interrupt mask state, it checks for unmasked
-	pending events and enters the hypervisor to get them delivered
-	if so.
+ * In principle the caller should be passing us a value return from
+ * xen_save_fl_direct, but for robustness sake we test only the
+ * X86_EFLAGS_IF flag rather than the whole byte. After setting the
+ * interrupt mask state, it checks for unmasked pending events and
+ * enters the hypervisor to get them delivered if so.
  */
 ENTRY(xen_restore_fl_direct)
 #ifdef CONFIG_X86_64
@@ -87,9 +88,11 @@ ENTRY(xen_restore_fl_direct)
 	testb $X86_EFLAGS_IF>>8, %ah
 #endif
 	setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
+	/*
+	 * Preempt here doesn't matter because that will deal with any
+	 * pending interrupts.  The pending check may end up being run
+	 * on the wrong CPU, but that doesn't hurt.
+	 */
 
 	/* check for unmasked and pending */
 	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
@@ -103,8 +106,8 @@ ENDPATCH(xen_restore_fl_direct)
 
 
 /*
-	Force an event check by making a hypercall,
-	but preserve regs before making the call.
+ * Force an event check by making a hypercall, but preserve regs
+ * before making the call.
  */
 check_events:
 #ifdef CONFIG_X86_32
@@ -137,4 +140,3 @@ check_events:
 	pop %rax
 #endif
 	ret
-
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index 082d173caaf..88e15deb8b8 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -1,17 +1,16 @@
 /*
-	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
-	The inline versions are the same as the direct-use versions, with the
-	pre- and post-amble chopped off.
-
-	This code is encoded for size rather than absolute efficiency,
-	with a view to being able to inline as much as possible.
-
-	We only bother with direct forms (ie, vcpu in pda) of the operations
-	here; the indirect forms are better handled in C, since they're
-	generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining.  The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in pda) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
  */
 
-//#include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 #include <asm/segment.h>
@@ -21,8 +20,8 @@
 #include "xen-asm.h"
 
 /*
-	Force an event check by making a hypercall,
-	but preserve regs before making the call.
+ * Force an event check by making a hypercall, but preserve regs
+ * before making the call.
  */
 check_events:
 	push %eax
@@ -35,10 +34,10 @@ check_events:
 	ret
 
 /*
-	We can't use sysexit directly, because we're not running in ring0.
-	But we can easily fake it up using iret.  Assuming xen_sysexit
-	is jumped to with a standard stack frame, we can just strip it
-	back to a standard iret frame and use iret.
+ * We can't use sysexit directly, because we're not running in ring0.
+ * But we can easily fake it up using iret.  Assuming xen_sysexit is
+ * jumped to with a standard stack frame, we can just strip it back to
+ * a standard iret frame and use iret.
  */
 ENTRY(xen_sysexit)
 	movl PT_EAX(%esp), %eax			/* Shouldn't be necessary? */
@@ -49,33 +48,31 @@ ENTRY(xen_sysexit)
 ENDPROC(xen_sysexit)
 
 /*
-	This is run where a normal iret would be run, with the same stack setup:
-	      8: eflags
-	      4: cs
-	esp-> 0: eip
-
-	This attempts to make sure that any pending events are dealt
-	with on return to usermode, but there is a small window in
-	which an event can happen just before entering usermode.  If
-	the nested interrupt ends up setting one of the TIF_WORK_MASK
-	pending work flags, they will not be tested again before
-	returning to usermode. This means that a process can end up
-	with pending work, which will be unprocessed until the process
-	enters and leaves the kernel again, which could be an
-	unbounded amount of time.  This means that a pending signal or
-	reschedule event could be indefinitely delayed.
-
-	The fix is to notice a nested interrupt in the critical
-	window, and if one occurs, then fold the nested interrupt into
-	the current interrupt stack frame, and re-process it
-	iteratively rather than recursively.  This means that it will
-	exit via the normal path, and all pending work will be dealt
-	with appropriately.
-
-	Because the nested interrupt handler needs to deal with the
-	current stack state in whatever form its in, we keep things
-	simple by only using a single register which is pushed/popped
-	on the stack.
+ * This is run where a normal iret would be run, with the same stack setup:
+ *	8: eflags
+ *	4: cs
+ *	esp-> 0: eip
+ *
+ * This attempts to make sure that any pending events are dealt with
+ * on return to usermode, but there is a small window in which an
+ * event can happen just before entering usermode.  If the nested
+ * interrupt ends up setting one of the TIF_WORK_MASK pending work
+ * flags, they will not be tested again before returning to
+ * usermode. This means that a process can end up with pending work,
+ * which will be unprocessed until the process enters and leaves the
+ * kernel again, which could be an unbounded amount of time.  This
+ * means that a pending signal or reschedule event could be
+ * indefinitely delayed.
+ *
+ * The fix is to notice a nested interrupt in the critical window, and
+ * if one occurs, then fold the nested interrupt into the current
+ * interrupt stack frame, and re-process it iteratively rather than
+ * recursively.  This means that it will exit via the normal path, and
+ * all pending work will be dealt with appropriately.
+ *
+ * Because the nested interrupt handler needs to deal with the current
+ * stack state in whatever form its in, we keep things simple by only
+ * using a single register which is pushed/popped on the stack.
  */
 ENTRY(xen_iret)
 	/* test eflags for special cases */
@@ -85,13 +82,15 @@ ENTRY(xen_iret)
 	push %eax
 	ESP_OFFSET=4	# bytes pushed onto stack
 
-	/* Store vcpu_info pointer for easy access.  Do it this
-	   way to avoid having to reload %fs */
+	/*
+	 * Store vcpu_info pointer for easy access.  Do it this way to
+	 * avoid having to reload %fs
+	 */
 #ifdef CONFIG_SMP
 	GET_THREAD_INFO(%eax)
-	movl TI_cpu(%eax),%eax
-	movl __per_cpu_offset(,%eax,4),%eax
-	mov per_cpu__xen_vcpu(%eax),%eax
+	movl TI_cpu(%eax), %eax
+	movl __per_cpu_offset(,%eax,4), %eax
+	mov per_cpu__xen_vcpu(%eax), %eax
 #else
 	movl per_cpu__xen_vcpu, %eax
 #endif
@@ -99,37 +98,46 @@ ENTRY(xen_iret)
 	/* check IF state we're restoring */
 	testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
 
-	/* Maybe enable events.  Once this happens we could get a
-	   recursive event, so the critical region starts immediately
-	   afterwards.  However, if that happens we don't end up
-	   resuming the code, so we don't have to be worried about
-	   being preempted to another CPU. */
+	/*
+	 * Maybe enable events.  Once this happens we could get a
+	 * recursive event, so the critical region starts immediately
+	 * afterwards.  However, if that happens we don't end up
+	 * resuming the code, so we don't have to be worried about
+	 * being preempted to another CPU.
+	 */
 	setz XEN_vcpu_info_mask(%eax)
 xen_iret_start_crit:
 
 	/* check for unmasked and pending */
 	cmpw $0x0001, XEN_vcpu_info_pending(%eax)
 
-	/* If there's something pending, mask events again so we
-	   can jump back into xen_hypervisor_callback */
+	/*
+	 * If there's something pending, mask events again so we can
+	 * jump back into xen_hypervisor_callback
+	 */
 	sete XEN_vcpu_info_mask(%eax)
 
 	popl %eax
 
-	/* From this point on the registers are restored and the stack
-	   updated, so we don't need to worry about it if we're preempted */
+	/*
+	 * From this point on the registers are restored and the stack
+	 * updated, so we don't need to worry about it if we're
+	 * preempted
+	 */
 iret_restore_end:
 
-	/* Jump to hypervisor_callback after fixing up the stack.
-	   Events are masked, so jumping out of the critical
-	   region is OK. */
+	/*
+	 * Jump to hypervisor_callback after fixing up the stack.
+	 * Events are masked, so jumping out of the critical region is
+	 * OK.
+	 */
 	je xen_hypervisor_callback
 
 1:	iret
 xen_iret_end_crit:
-.section __ex_table,"a"
+.section __ex_table, "a"
 	.align 4
-	.long 1b,iret_exc
+	.long 1b, iret_exc
 .previous
 
 hyper_iret:
@@ -139,55 +147,55 @@ hyper_iret:
 	.globl xen_iret_start_crit, xen_iret_end_crit
 
 /*
-   This is called by xen_hypervisor_callback in entry.S when it sees
-   that the EIP at the time of interrupt was between xen_iret_start_crit
-   and xen_iret_end_crit.  We're passed the EIP in %eax so we can do
-   a more refined determination of what to do.
-
-   The stack format at this point is:
-	----------------
-	 ss		: (ss/esp may be present if we came from usermode)
-	 esp		:
-	 eflags		}  outer exception info
-	 cs		}
-	 eip		}
-	---------------- <- edi (copy dest)
-	 eax		:  outer eax if it hasn't been restored
-	----------------
-	 eflags		}  nested exception info
-	 cs		}   (no ss/esp because we're nested
-	 eip		}    from the same ring)
-	 orig_eax	}<- esi (copy src)
-	 - - - - - - - -
-	 fs		}
-	 es		}
-	 ds		}  SAVE_ALL state
-	 eax		}
-	  :		:
-	 ebx		}<- esp
-	----------------
-
-   In order to deliver the nested exception properly, we need to shift
-   everything from the return addr up to the error code so it
-   sits just under the outer exception info.  This means that when we
-   handle the exception, we do it in the context of the outer exception
-   rather than starting a new one.
-
-   The only caveat is that if the outer eax hasn't been
-   restored yet (ie, it's still on stack), we need to insert
-   its value into the SAVE_ALL state before going on, since
-   it's usermode state which we eventually need to restore.
+ * This is called by xen_hypervisor_callback in entry.S when it sees
+ * that the EIP at the time of interrupt was between
+ * xen_iret_start_crit and xen_iret_end_crit.  We're passed the EIP in
+ * %eax so we can do a more refined determination of what to do.
+ *
+ * The stack format at this point is:
+ *	----------------
+ *	 ss		: (ss/esp may be present if we came from usermode)
+ *	 esp		:
+ *	 eflags		}  outer exception info
+ *	 cs		}
+ *	 eip		}
+ *	---------------- <- edi (copy dest)
+ *	 eax		:  outer eax if it hasn't been restored
+ *	----------------
+ *	 eflags		}  nested exception info
+ *	 cs		}   (no ss/esp because we're nested
+ *	 eip		}    from the same ring)
+ *	 orig_eax	}<- esi (copy src)
+ *	 - - - - - - - -
+ *	 fs		}
+ *	 es		}
+ *	 ds		}  SAVE_ALL state
+ *	 eax		}
+ *	  :		:
+ *	 ebx		}<- esp
+ *	----------------
+ *
+ * In order to deliver the nested exception properly, we need to shift
+ * everything from the return addr up to the error code so it sits
+ * just under the outer exception info.  This means that when we
+ * handle the exception, we do it in the context of the outer
+ * exception rather than starting a new one.
+ *
+ * The only caveat is that if the outer eax hasn't been restored yet
+ * (ie, it's still on stack), we need to insert its value into the
+ * SAVE_ALL state before going on, since it's usermode state which we
+ * eventually need to restore.
  */
 ENTRY(xen_iret_crit_fixup)
 	/*
-	   Paranoia: Make sure we're really coming from kernel space.
-	   One could imagine a case where userspace jumps into the
-	   critical range address, but just before the CPU delivers a GP,
-	   it decides to deliver an interrupt instead.  Unlikely?
-	   Definitely.  Easy to avoid?  Yes.  The Intel documents
-	   explicitly say that the reported EIP for a bad jump is the
-	   jump instruction itself, not the destination, but some virtual
-	   environments get this wrong.
+	 * Paranoia: Make sure we're really coming from kernel space.
+	 * One could imagine a case where userspace jumps into the
+	 * critical range address, but just before the CPU delivers a
+	 * GP, it decides to deliver an interrupt instead.  Unlikely?
+	 * Definitely.  Easy to avoid?  Yes.  The Intel documents
+	 * explicitly say that the reported EIP for a bad jump is the
+	 * jump instruction itself, not the destination, but some
+	 * virtual environments get this wrong.
 	 */
 	movl PT_CS(%esp), %ecx
 	andl $SEGMENT_RPL_MASK, %ecx
@@ -197,15 +205,17 @@ ENTRY(xen_iret_crit_fixup)
 	lea PT_ORIG_EAX(%esp), %esi
 	lea PT_EFLAGS(%esp), %edi
 
-	/* If eip is before iret_restore_end then stack
-	   hasn't been restored yet. */
+	/*
+	 * If eip is before iret_restore_end then stack
+	 * hasn't been restored yet.
+	 */
 	cmp $iret_restore_end, %eax
 	jae 1f
 
-	movl 0+4(%edi),%eax		/* copy EAX (just above top of frame) */
+	movl 0+4(%edi), %eax		/* copy EAX (just above top of frame) */
 	movl %eax, PT_EAX(%esp)
 
-	lea ESP_OFFSET(%edi),%edi	/* move dest up over saved regs */
+	lea ESP_OFFSET(%edi), %edi	/* move dest up over saved regs */
 
 	/* set up the copy */
 1:	std
@@ -213,6 +223,6 @@ ENTRY(xen_iret_crit_fixup)
 	rep movsl
 	cld
 
-	lea 4(%edi),%esp		/* point esp to new frame */
+	lea 4(%edi), %esp		/* point esp to new frame */
 2:	jmp xen_do_upcall
 
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index d205a283efe..02f496a8dba 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -1,14 +1,14 @@
 /*
-	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
-	The inline versions are the same as the direct-use versions, with the
-	pre- and post-amble chopped off.
-
-	This code is encoded for size rather than absolute efficiency,
-	with a view to being able to inline as much as possible.
-
-	We only bother with direct forms (ie, vcpu in pda) of the operations
-	here; the indirect forms are better handled in C, since they're
-	generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining.  The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in pda) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
  */
 
 #include <asm/errno.h>
@@ -21,25 +21,25 @@
 #include "xen-asm.h"
 
 ENTRY(xen_adjust_exception_frame)
-	mov 8+0(%rsp),%rcx
-	mov 8+8(%rsp),%r11
+	mov 8+0(%rsp), %rcx
+	mov 8+8(%rsp), %r11
 	ret $16
 
 hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
 /*
-	Xen64 iret frame:
-
-	ss
-	rsp
-	rflags
-	cs
-	rip		<-- standard iret frame
-
-	flags
-
-	rcx		}
-	r11		}<-- pushed by hypercall page
-rsp ->	rax		}
+ * Xen64 iret frame:
+ *
+ *	ss
+ *	rsp
+ *	rflags
+ *	cs
+ *	rip		<-- standard iret frame
+ *
+ *	flags
+ *
+ *	rcx		}
+ *	r11		}<-- pushed by hypercall page
+ * rsp->rax		}
  */
 ENTRY(xen_iret)
 	pushq $0
@@ -48,8 +48,8 @@ ENDPATCH(xen_iret)
 RELOC(xen_iret, 1b+1)
 
 /*
-	sysexit is not used for 64-bit processes, so it's
-	only ever used to return to 32-bit compat userspace.
+ * sysexit is not used for 64-bit processes, so it's only ever used to
+ * return to 32-bit compat userspace.
  */
 ENTRY(xen_sysexit)
 	pushq $__USER32_DS
@@ -64,10 +64,12 @@ ENDPATCH(xen_sysexit)
 RELOC(xen_sysexit, 1b+1)
 
 ENTRY(xen_sysret64)
-	/* We're already on the usermode stack at this point, but still
-	   with the kernel gs, so we can easily switch back */
+	/*
+	 * We're already on the usermode stack at this point, but
+	 * still with the kernel gs, so we can easily switch back
+	 */
 	movq %rsp, PER_CPU_VAR(old_rsp)
-	movq PER_CPU_VAR(kernel_stack),%rsp
+	movq PER_CPU_VAR(kernel_stack), %rsp
 
 	pushq $__USER_DS
 	pushq PER_CPU_VAR(old_rsp)
@@ -81,8 +83,10 @@ ENDPATCH(xen_sysret64)
 RELOC(xen_sysret64, 1b+1)
 
 ENTRY(xen_sysret32)
-	/* We're already on the usermode stack at this point, but still
-	   with the kernel gs, so we can easily switch back */
+	/*
+	 * We're already on the usermode stack at this point, but
+	 * still with the kernel gs, so we can easily switch back
+	 */
 	movq %rsp, PER_CPU_VAR(old_rsp)
 	movq PER_CPU_VAR(kernel_stack), %rsp
 
@@ -98,28 +102,27 @@ ENDPATCH(xen_sysret32)
 RELOC(xen_sysret32, 1b+1)
 
 /*
-	Xen handles syscall callbacks much like ordinary exceptions,
-	which means we have:
-	 - kernel gs
-	 - kernel rsp
-	 - an iret-like stack frame on the stack (including rcx and r11):
-		ss
-		rsp
-		rflags
-		cs
-		rip
-		r11
-	rsp->	rcx
-
-	In all the entrypoints, we undo all that to make it look
-	like a CPU-generated syscall/sysenter and jump to the normal
-	entrypoint.
+ * Xen handles syscall callbacks much like ordinary exceptions, which
+ * means we have:
+ * - kernel gs
+ * - kernel rsp
+ * - an iret-like stack frame on the stack (including rcx and r11):
+ *	ss
+ *	rsp
+ *	rflags
+ *	cs
+ *	rip
+ *	r11
+ * rsp->rcx
+ *
+ * In all the entrypoints, we undo all that to make it look like a
+ * CPU-generated syscall/sysenter and jump to the normal entrypoint.
  */
 
 .macro undo_xen_syscall
-	mov 0*8(%rsp),%rcx
-	mov 1*8(%rsp),%r11
-	mov 5*8(%rsp),%rsp
+	mov 0*8(%rsp), %rcx
+	mov 1*8(%rsp), %r11
+	mov 5*8(%rsp), %rsp
 .endm
 
 /* Normal 64-bit system call target */
@@ -146,7 +149,7 @@ ENDPROC(xen_sysenter_target)
 
 ENTRY(xen_syscall32_target)
 ENTRY(xen_sysenter_target)
-	lea 16(%rsp), %rsp	/* strip %rcx,%r11 */
+	lea 16(%rsp), %rsp	/* strip %rcx, %r11 */
 	mov $-ENOSYS, %rax
 	pushq $VGCF_in_syscall
 	jmp hypercall_iret
-- 
cgit v1.2.3


From 65a4e574d2382d83f71b30ea92f86d2e40a6ef8d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 03:36:17 +0100
Subject: smp, generic: introduce arch_disable_smp_support() instead of
 disable_ioapic_setup()

Impact: cleanup

disable_ioapic_setup() in init/main.c is ugly as the function is
x86-specific. The #ifdef inline prototype there is ugly too.

Replace it with a generic arch_disable_smp_support() function - which
has a weak alias for non-x86 architectures and for non-ioapic x86 builds.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/io_apic.h |  9 ---------
 arch/x86/kernel/apic.c         |  4 +---
 arch/x86/kernel/io_apic.c      | 11 ++++++++++-
 arch/x86/kernel/smpboot.c      |  2 +-
 4 files changed, 12 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 08ec793aa04..309d0e23193 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -143,15 +143,6 @@ extern int noioapicreroute;
 /* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
 extern int timer_through_8259;
 
-static inline void disable_ioapic_setup(void)
-{
-#ifdef CONFIG_PCI
-	noioapicquirk = 1;
-	noioapicreroute = -1;
-#endif
-	skip_ioapic_setup = 1;
-}
-
 /*
  * If we use the IO-APIC for IRQ routing, disable automatic
  * assignment of PCI IRQ's.
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 85d8b50d1af..a04a73a51d2 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1138,9 +1138,7 @@ void __cpuinit setup_local_APIC(void)
 	int i, j;
 
 	if (disable_apic) {
-#ifdef CONFIG_X86_IO_APIC
-		disable_ioapic_setup();
-#endif
+		arch_disable_smp_support();
 		return;
 	}
 
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 57d60c741e3..84bccac4619 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -98,10 +98,19 @@ DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 int skip_ioapic_setup;
 
+void arch_disable_smp_support(void)
+{
+#ifdef CONFIG_PCI
+	noioapicquirk = 1;
+	noioapicreroute = -1;
+#endif
+	skip_ioapic_setup = 1;
+}
+
 static int __init parse_noapic(char *str)
 {
 	/* disable IO-APIC */
-	disable_ioapic_setup();
+	arch_disable_smp_support();
 	return 0;
 }
 early_param("noapic", parse_noapic);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f40f86fec2f..96f7d304f5c 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1071,7 +1071,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 		printk(KERN_ERR "... forcing use of dummy APIC emulation."
 				"(tell your hw vendor)\n");
 		smpboot_clear_io_apic();
-		disable_ioapic_setup();
+		arch_disable_smp_support();
 		return -1;
 	}
 
-- 
cgit v1.2.3


From fdbecd9fd14198853bec4cbae8bc7af93f2e3de3 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 31 Jan 2009 03:57:12 +0100
Subject: x86, apic: explain the purpose of max_physical_apicid

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index a04a73a51d2..5475e1c3180 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -50,13 +50,26 @@
 #include <asm/smp.h>
 
 unsigned int num_processors;
+
 unsigned disabled_cpus __cpuinitdata;
+
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
-EXPORT_SYMBOL(boot_cpu_physical_apicid);
+
+/*
+ * The highest APIC ID seen during enumeration.
+ *
+ * This determines the messaging protocol we can use: if all APIC IDs
+ * are in the 0 ... 7 range, then we can use logical addressing which
+ * has some performance advantages (better broadcasting).
+ *
+ * If there's an APIC ID above 8, we use physical addressing.
+ */
 unsigned int max_physical_apicid;
 
-/* Bitmask of physically existing CPUs */
+/*
+ * Bitmask of physically existing CPUs:
+ */
 physid_mask_t phys_cpu_present_map;
 
 /*
-- 
cgit v1.2.3


From c5e954820335ef5aed1662b70aaf5deb9de16735 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Fri, 30 Jan 2009 17:29:27 -0800
Subject: x86: move default_ipi_xx back to ipi.c

Impact: cleanup

only leave _default_ipi_xx etc in .h

Beyond the cleanup factor, this saves a bit of code size as well:

    text	   data	    bss	    dec	            hex	filename
 7281931	1630144	1463304	10375379	 9e50d3	vmlinux.before
 7281753	1630144	1463304	10375201	 9e5021	vmlinux.after

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/hw_irq.h |   6 --
 arch/x86/include/asm/ipi.h    | 127 +++++-------------------------------------
 arch/x86/kernel/ipi.c         | 108 +++++++++++++++++++++++++++++++++++
 3 files changed, 121 insertions(+), 120 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 3ef2bded97a..1a20e3d1200 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -71,12 +71,6 @@ extern void setup_ioapic_dest(void);
 extern void enable_IO_APIC(void);
 #endif
 
-/* IPI functions */
-#ifdef CONFIG_X86_32
-extern void default_send_IPI_self(int vector);
-#endif
-extern void default_send_IPI(int dest, int vector);
-
 /* Statistics */
 extern atomic_t irq_err_count;
 extern atomic_t irq_mis_count;
diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index aa79945445b..5f2efc5d992 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -119,112 +119,22 @@ static inline void
 	native_apic_mem_write(APIC_ICR, cfg);
 }
 
-static inline void
-default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
-{
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicast to each CPU instead.
-	 * - mbligh
-	 */
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
-				query_cpu), vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-static inline void
-default_send_IPI_mask_allbutself_phys(const struct cpumask *mask, int vector)
-{
-	unsigned int this_cpu = smp_processor_id();
-	unsigned int query_cpu;
-	unsigned long flags;
-
-	/* See Hack comment above */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
-				 query_cpu), vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
+extern void default_send_IPI_mask_sequence_phys(const struct cpumask *mask,
+						 int vector);
+extern void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
+							 int vector);
 #include <asm/genapic.h>
 
-static inline void
-default_send_IPI_mask_sequence_logical(const struct cpumask *mask, int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
-	 * should be modified to do 1 message per cluster ID - mbligh
-	 */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		__default_send_IPI_dest_field(
-			apic->cpu_to_logical_apicid(query_cpu), vector,
-			apic->dest_logical);
-	local_irq_restore(flags);
-}
-
-static inline void
-default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-	unsigned int this_cpu = smp_processor_id();
-
-	/* See Hack comment above */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__default_send_IPI_dest_field(
-			apic->cpu_to_logical_apicid(query_cpu), vector,
-			apic->dest_logical);
-		}
-	local_irq_restore(flags);
-}
+extern void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
+							 int vector);
+extern void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
+							 int vector);
 
 /* Avoid include hell */
 #define NMI_VECTOR 0x02
 
 extern int no_broadcast;
 
-#ifndef CONFIG_X86_64
-/*
- * This is only used on smaller machines.
- */
-static inline void default_send_IPI_mask_bitmask_logical(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-	unsigned long flags;
-
-	local_irq_save(flags);
-	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
-	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
-	local_irq_restore(flags);
-}
-
-static inline void default_send_IPI_mask_logical(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_bitmask_logical(mask, vector);
-}
-#endif
-
 static inline void __default_local_send_IPI_allbutself(int vector)
 {
 	if (no_broadcast || vector == NMI_VECTOR)
@@ -242,22 +152,11 @@ static inline void __default_local_send_IPI_all(int vector)
 }
 
 #ifdef CONFIG_X86_32
-static inline void default_send_IPI_allbutself(int vector)
-{
-	/*
-	 * if there are no other CPUs in the system then we get an APIC send 
-	 * error if we try to broadcast, thus avoid sending IPIs in this case.
-	 */
-	if (!(num_online_cpus() > 1))
-		return;
-
-	__default_local_send_IPI_allbutself(vector);
-}
-
-static inline void default_send_IPI_all(int vector)
-{
-	__default_local_send_IPI_all(vector);
-}
+extern void default_send_IPI_mask_logical(const struct cpumask *mask,
+						 int vector);
+extern void default_send_IPI_allbutself(int vector);
+extern void default_send_IPI_all(int vector);
+extern void default_send_IPI_self(int vector);
 #endif
 
 #endif
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 339f4f3feee..dbf5445727a 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -19,8 +19,116 @@
 #include <asm/proto.h>
 #include <asm/ipi.h>
 
+void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
+{
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicast to each CPU instead.
+	 * - mbligh
+	 */
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
+				query_cpu), vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
+						 int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int query_cpu;
+	unsigned long flags;
+
+	/* See Hack comment above */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
+				 query_cpu), vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
+						 int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
+	 * should be modified to do 1 message per cluster ID - mbligh
+	 */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask)
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector,
+			apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
+						 int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+	unsigned int this_cpu = smp_processor_id();
+
+	/* See Hack comment above */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector,
+			apic->dest_logical);
+		}
+	local_irq_restore(flags);
+}
+
 #ifdef CONFIG_X86_32
 
+/*
+ * This is only used on smaller machines.
+ */
+void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector)
+{
+	unsigned long mask = cpumask_bits(cpumask)[0];
+	unsigned long flags;
+
+	local_irq_save(flags);
+	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
+	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__default_local_send_IPI_allbutself(vector);
+}
+
+void default_send_IPI_all(int vector)
+{
+	__default_local_send_IPI_all(vector);
+}
+
 void default_send_IPI_self(int vector)
 {
 	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, apic->dest_logical);
-- 
cgit v1.2.3


From 4f179d121885142fb907b64956228b369d495958 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 1 Feb 2009 11:25:57 +0100
Subject: x86, numaq: cleanups

Also move xquad_portio over to where it's allocated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/numaq.h |  2 ++
 arch/x86/kernel/numaq_32.c   | 33 ++++++++++++++++++---------------
 arch/x86/pci/numaq_32.c      |  4 ----
 3 files changed, 20 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
index 1e8bd30b4c1..9f0a5f5d29e 100644
--- a/arch/x86/include/asm/numaq.h
+++ b/arch/x86/include/asm/numaq.h
@@ -31,6 +31,8 @@
 extern int found_numaq;
 extern int get_memcfg_numaq(void);
 
+extern void *xquad_portio;
+
 /*
  * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
  */
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 947748e1721..0cc41a1d255 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2002, IBM Corp.
  *
- * All rights reserved.          
+ * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,17 +23,18 @@
  * Send feedback to <gone@us.ibm.com>
  */
 
-#include <linux/mm.h>
+#include <linux/nodemask.h>
 #include <linux/bootmem.h>
 #include <linux/mmzone.h>
 #include <linux/module.h>
-#include <linux/nodemask.h>
-#include <asm/numaq.h>
-#include <asm/topology.h>
+#include <linux/mm.h>
+
 #include <asm/processor.h>
+#include <asm/topology.h>
 #include <asm/genapic.h>
-#include <asm/e820.h>
+#include <asm/numaq.h>
 #include <asm/setup.h>
+#include <asm/e820.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -91,19 +92,20 @@ static int __init numaq_pre_time_init(void)
 }
 
 int found_numaq;
+
 /*
  * Have to match translation table entries to main table entries by counter
  * hence the mpc_record variable .... can't see a less disgusting way of
  * doing this ....
  */
 struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
+	unsigned char		mpc_type;
+	unsigned char		trans_len;
+	unsigned char		trans_type;
+	unsigned char		trans_quad;
+	unsigned char		trans_global;
+	unsigned char		trans_local;
+	unsigned short		trans_reserved;
 };
 
 /* x86_quirks member */
@@ -444,7 +446,8 @@ static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-extern void *xquad_portio;
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
 
 static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
@@ -502,7 +505,7 @@ static void numaq_setup_portio_remap(void)
 	int num_quads = num_online_nodes();
 
 	if (num_quads <= 1)
-       		return;
+		return;
 
 	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
 	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 1b2d773612e..5601e829c38 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -18,10 +18,6 @@
 
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
 
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-EXPORT_SYMBOL(xquad_portio);
-
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 
 #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
-- 
cgit v1.2.3


From 8f9ca475c994e4d32f405183d07e8c7eedbdbdb4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 5 Feb 2009 16:21:53 +0100
Subject: x86: clean up arch/x86/Kconfig*

- Consistent alignment of help text
- Use the ---help--- keyword everywhere consistently as a visual separator
- fix whitespace mismatches

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig       | 404 ++++++++++++++++++++++++-------------------------
 arch/x86/Kconfig.cpu   |  70 ++++-----
 arch/x86/Kconfig.debug |  47 +++---
 3 files changed, 260 insertions(+), 261 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 80291f749b6..270ecf90bdb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -5,7 +5,7 @@ mainmenu "Linux Kernel Configuration for x86"
 config 64BIT
 	bool "64-bit kernel" if ARCH = "x86"
 	default ARCH = "x86_64"
-	help
+	---help---
 	  Say yes to build a 64-bit kernel - formerly known as x86_64
 	  Say no to build a 32-bit kernel - formerly known as i386
 
@@ -235,7 +235,7 @@ config SMP
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
 	depends on PCI_MSI || HT_IRQ
-	help
+	---help---
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
 	  want to have low kernel memory footprint on smaller machines.
@@ -249,7 +249,7 @@ config NUMA_MIGRATE_IRQ_DESC
 	bool "Move irq desc when changing irq smp_affinity"
 	depends on SPARSE_IRQ && NUMA
 	default n
-	help
+	---help---
 	  This enables moving irq_desc to cpu/node that irq will use handled.
 
 	  If you don't know what to do here, say N.
@@ -258,19 +258,19 @@ config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
 	default y
 	depends on X86_LOCAL_APIC
-	help
+	---help---
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
 
 config X86_BIGSMP
 	bool "Support for big SMP systems with more than 8 CPUs"
 	depends on X86_32 && SMP
-	help
+	---help---
 	  This option is needed for the systems that have more than 8 CPUs
 
 config X86_NON_STANDARD
 	bool "Support for non-standard x86 platforms"
-	help
+	---help---
 	  If you disable this option then the kernel will only support
 	  standard PC platforms. (which covers the vast majority of
 	  systems out there.)
@@ -285,7 +285,7 @@ config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
 
@@ -300,7 +300,7 @@ config X86_RDC321X
 	depends on X86_NON_STANDARD
 	select M486
 	select X86_REBOOTFIXUPS
-	help
+	---help---
 	  This option is needed for RDC R-321x system-on-chip, also known
 	  as R-8610-(G).
 	  If you don't have one of these chips, you should say N here.
@@ -309,7 +309,7 @@ config X86_UV
 	bool "SGI Ultraviolet"
 	depends on X86_64
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
 
@@ -318,7 +318,7 @@ config X86_VSMP
 	select PARAVIRT
 	depends on X86_64 && PCI
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
 	  supposed to run on these EM64T-based machines.  Only choose this option
 	  if you have one of these machines.
@@ -327,7 +327,7 @@ config X86_ELAN
 	bool "AMD Elan"
 	depends on X86_32
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  Select this for an AMD Elan processor.
 
 	  Do not use this option for K6/Athlon/Opteron processors!
@@ -338,8 +338,8 @@ config X86_32_NON_STANDARD
 	bool "Support non-standard 32-bit SMP architectures"
 	depends on X86_32 && SMP
 	depends on X86_NON_STANDARD
-	help
-          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	---help---
+	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
 	  subarchitectures.  It is intended for a generic binary kernel.
 	  if you select them all, kernel will probe it one by one. and will
 	  fallback to default.
@@ -349,7 +349,7 @@ config X86_NUMAQ
 	depends on X86_32_NON_STANDARD
 	select NUMA
 	select X86_MPPARSE
-	help
+	---help---
 	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
 	  NUMA multiquad box. This changes the way that processors are
 	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
@@ -359,14 +359,14 @@ config X86_NUMAQ
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
 	depends on X86_32_NON_STANDARD
-	help
+	---help---
 	  This option is needed for IBM systems that use the Summit/EXA chipset.
 	  In particular, it is needed for the x440.
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
 	depends on X86_32_NON_STANDARD && X86_BIGSMP
-	help
+	---help---
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 
@@ -374,7 +374,7 @@ config X86_VOYAGER
 	bool "Voyager (NCR)"
 	depends on SMP && !PCI && BROKEN
 	depends on X86_32_NON_STANDARD
-	help
+	---help---
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
 
@@ -387,7 +387,7 @@ config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
 	depends on X86
-	help
+	---help---
 	  Calculate simpler /proc/<PID>/wchan values. If this option
 	  is disabled then wchan values will recurse back to the
 	  caller function. This provides more accurate wchan values,
@@ -397,7 +397,7 @@ config SCHED_OMIT_FRAME_POINTER
 
 menuconfig PARAVIRT_GUEST
 	bool "Paravirtualized guest support"
-	help
+	---help---
 	  Say Y here to get to see options related to running Linux under
 	  various hypervisors.  This option alone does not add any kernel code.
 
@@ -411,7 +411,7 @@ config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
-	help
+	---help---
 	  VMI provides a paravirtualized interface to the VMware ESX server
 	  (it could be used by other hypervisors in theory too, but is not
 	  at the moment), by linking the kernel to a GPL-ed ROM module
@@ -421,7 +421,7 @@ config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	help
+	---help---
 	  Turning on this option will allow you to run a paravirtualized clock
 	  when running over the KVM hypervisor. Instead of relying on a PIT
 	  (or probably other) emulation by the underlying device model, the host
@@ -431,15 +431,15 @@ config KVM_CLOCK
 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
-	help
-	 This option enables various optimizations for running under the KVM
-	 hypervisor.
+	---help---
+	  This option enables various optimizations for running under the KVM
+	  hypervisor.
 
 source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT
 	bool "Enable paravirtualization code"
-	help
+	---help---
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
 	  over full virtualization.  However, when run without a hypervisor
@@ -452,21 +452,21 @@ config PARAVIRT_CLOCK
 endif
 
 config PARAVIRT_DEBUG
-       bool "paravirt-ops debugging"
-       depends on PARAVIRT && DEBUG_KERNEL
-       help
-         Enable to debug paravirt_ops internals.  Specifically, BUG if
-	 a paravirt_op is missing when it is called.
+	bool "paravirt-ops debugging"
+	depends on PARAVIRT && DEBUG_KERNEL
+	---help---
+	  Enable to debug paravirt_ops internals.  Specifically, BUG if
+	  a paravirt_op is missing when it is called.
 
 config MEMTEST
 	bool "Memtest"
-	help
+	---help---
 	  This option adds a kernel parameter 'memtest', which allows memtest
 	  to be set.
-		memtest=0, mean disabled; -- default
-		memtest=1, mean do 1 test pattern;
-		...
-		memtest=4, mean do 4 test patterns.
+	        memtest=0, mean disabled; -- default
+	        memtest=1, mean do 1 test pattern;
+	        ...
+	        memtest=4, mean do 4 test patterns.
 	  If you are unsure how to answer this question, answer N.
 
 config X86_SUMMIT_NUMA
@@ -482,21 +482,21 @@ source "arch/x86/Kconfig.cpu"
 config HPET_TIMER
 	def_bool X86_64
 	prompt "HPET Timer Support" if X86_32
-	help
-         Use the IA-PC HPET (High Precision Event Timer) to manage
-         time in preference to the PIT and RTC, if a HPET is
-         present.
-         HPET is the next generation timer replacing legacy 8254s.
-         The HPET provides a stable time base on SMP
-         systems, unlike the TSC, but it is more expensive to access,
-         as it is off-chip.  You can find the HPET spec at
-         <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
+	---help---
+	  Use the IA-PC HPET (High Precision Event Timer) to manage
+	  time in preference to the PIT and RTC, if a HPET is
+	  present.
+	  HPET is the next generation timer replacing legacy 8254s.
+	  The HPET provides a stable time base on SMP
+	  systems, unlike the TSC, but it is more expensive to access,
+	  as it is off-chip.  You can find the HPET spec at
+	  <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
 
-         You can safely choose Y here.  However, HPET will only be
-         activated if the platform and the BIOS support this feature.
-         Otherwise the 8254 will be used for timing services.
+	  You can safely choose Y here.  However, HPET will only be
+	  activated if the platform and the BIOS support this feature.
+	  Otherwise the 8254 will be used for timing services.
 
-         Choose N to continue using the legacy 8254 timer.
+	  Choose N to continue using the legacy 8254 timer.
 
 config HPET_EMULATE_RTC
 	def_bool y
@@ -507,7 +507,7 @@ config HPET_EMULATE_RTC
 config DMI
 	default y
 	bool "Enable DMI scanning" if EMBEDDED
-	help
+	---help---
 	  Enabled scanning of DMI to identify machine quirks. Say Y
 	  here unless you have verified that your setup is not
 	  affected by entries in the DMI blacklist. Required by PNP
@@ -519,7 +519,7 @@ config GART_IOMMU
 	select SWIOTLB
 	select AGP
 	depends on X86_64 && PCI
-	help
+	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
 	  sound, many IDE/SATA chipsets and some other devices.
@@ -534,7 +534,7 @@ config CALGARY_IOMMU
 	bool "IBM Calgary IOMMU support"
 	select SWIOTLB
 	depends on X86_64 && PCI && EXPERIMENTAL
-	help
+	---help---
 	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
 	  systems. Needed to run systems with more than 3GB of memory
 	  properly with 32-bit PCI devices that do not support DAC
@@ -552,7 +552,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
 	def_bool y
 	prompt "Should Calgary be enabled by default?"
 	depends on CALGARY_IOMMU
-	help
+	---help---
 	  Should Calgary be enabled by default? if you choose 'y', Calgary
 	  will be used (if it exists). If you choose 'n', Calgary will not be
 	  used even if it exists. If you choose 'n' and would like to use
@@ -564,7 +564,7 @@ config AMD_IOMMU
 	select SWIOTLB
 	select PCI_MSI
 	depends on X86_64 && PCI && ACPI
-	help
+	---help---
 	  With this option you can enable support for AMD IOMMU hardware in
 	  your system. An IOMMU is a hardware component which provides
 	  remapping of DMA memory accesses from devices. With an AMD IOMMU you
@@ -579,7 +579,7 @@ config AMD_IOMMU_STATS
 	bool "Export AMD IOMMU statistics to debugfs"
 	depends on AMD_IOMMU
 	select DEBUG_FS
-	help
+	---help---
 	  This option enables code in the AMD IOMMU driver to collect various
 	  statistics about whats happening in the driver and exports that
 	  information to userspace via debugfs.
@@ -588,7 +588,7 @@ config AMD_IOMMU_STATS
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
 	def_bool y if X86_64
-	help
+	---help---
 	  Support for software bounce buffers used on x86-64 systems
 	  which don't have a hardware IOMMU (e.g. the current generation
 	  of Intel's x86-64 CPUs). Using this PCI devices which can only
@@ -606,7 +606,7 @@ config MAXSMP
 	depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
 	select CPUMASK_OFFSTACK
 	default n
-	help
+	---help---
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
@@ -617,7 +617,7 @@ config NR_CPUS
 	default "4096" if MAXSMP
 	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
 	default "8" if SMP
-	help
+	---help---
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
@@ -628,7 +628,7 @@ config NR_CPUS
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
 	depends on X86_HT
-	help
+	---help---
 	  SMT scheduler support improves the CPU scheduler's decision making
 	  when dealing with Intel Pentium 4 chips with HyperThreading at a
 	  cost of slightly increased overhead in some places. If unsure say
@@ -638,7 +638,7 @@ config SCHED_MC
 	def_bool y
 	prompt "Multi-core scheduler support"
 	depends on X86_HT
-	help
+	---help---
 	  Multi-core scheduler support improves the CPU scheduler's decision
 	  making when dealing with multi-core CPU chips at a cost of slightly
 	  increased overhead in some places. If unsure say N here.
@@ -648,7 +648,7 @@ source "kernel/Kconfig.preempt"
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
 	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
-	help
+	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
 	  system which has a processor with a local APIC, you can say Y here to
@@ -661,7 +661,7 @@ config X86_UP_APIC
 config X86_UP_IOAPIC
 	bool "IO-APIC support on uniprocessors"
 	depends on X86_UP_APIC
-	help
+	---help---
 	  An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
 	  SMP-capable replacement for PC-style interrupt controllers. Most
 	  SMP systems and many recent uniprocessor systems have one.
@@ -686,7 +686,7 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
 	default n
 	depends on X86_IO_APIC
-	help
+	---help---
 	  This option enables a workaround that fixes a source of
 	  spurious interrupts. This is recommended when threaded
 	  interrupt handling is used on systems where the generation of
@@ -726,7 +726,7 @@ config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	help
+	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
 
@@ -734,14 +734,14 @@ config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	help
+	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
 	depends on X86_32 && X86_MCE
-	help
+	---help---
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
 	  Non-fatal problems automatically get corrected (but still logged).
@@ -754,7 +754,7 @@ config X86_MCE_NONFATAL
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
 	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
-	help
+	---help---
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
 
@@ -762,11 +762,11 @@ config VM86
 	bool "Enable VM86 support" if EMBEDDED
 	default y
 	depends on X86_32
-	help
-          This option is required by programs like DOSEMU to run 16-bit legacy
+	---help---
+	  This option is required by programs like DOSEMU to run 16-bit legacy
 	  code on X86 processors. It also may be needed by software like
-          XFree86 to initialize some video cards via BIOS. Disabling this
-          option saves about 6k.
+	  XFree86 to initialize some video cards via BIOS. Disabling this
+	  option saves about 6k.
 
 config TOSHIBA
 	tristate "Toshiba Laptop support"
@@ -840,33 +840,33 @@ config MICROCODE
 	  module will be called microcode.
 
 config MICROCODE_INTEL
-       bool "Intel microcode patch loading support"
-       depends on MICROCODE
-       default MICROCODE
-       select FW_LOADER
-       --help---
-         This options enables microcode patch loading support for Intel
-         processors.
-
-         For latest news and information on obtaining all the required
-         Intel ingredients for this driver, check:
-         <http://www.urbanmyth.org/microcode/>.
+	bool "Intel microcode patch loading support"
+	depends on MICROCODE
+	default MICROCODE
+	select FW_LOADER
+	---help---
+	  This options enables microcode patch loading support for Intel
+	  processors.
+
+	  For latest news and information on obtaining all the required
+	  Intel ingredients for this driver, check:
+	  <http://www.urbanmyth.org/microcode/>.
 
 config MICROCODE_AMD
-       bool "AMD microcode patch loading support"
-       depends on MICROCODE
-       select FW_LOADER
-       --help---
-         If you select this option, microcode patch loading support for AMD
-	 processors will be enabled.
+	bool "AMD microcode patch loading support"
+	depends on MICROCODE
+	select FW_LOADER
+	---help---
+	  If you select this option, microcode patch loading support for AMD
+	  processors will be enabled.
 
-   config MICROCODE_OLD_INTERFACE
+config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
-	help
+	---help---
 	  This device gives privileged processes access to the x86
 	  Model-Specific Registers (MSRs).  It is a character device with
 	  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
@@ -875,7 +875,7 @@ config X86_MSR
 
 config X86_CPUID
 	tristate "/dev/cpu/*/cpuid - CPU information support"
-	help
+	---help---
 	  This device gives processes access to the x86 CPUID instruction to
 	  be executed on a specific processor.  It is a character device
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
@@ -927,7 +927,7 @@ config NOHIGHMEM
 config HIGHMEM4G
 	bool "4GB"
 	depends on !X86_NUMAQ
-	help
+	---help---
 	  Select this if you have a 32-bit processor and between 1 and 4
 	  gigabytes of physical RAM.
 
@@ -935,7 +935,7 @@ config HIGHMEM64G
 	bool "64GB"
 	depends on !M386 && !M486
 	select X86_PAE
-	help
+	---help---
 	  Select this if you have a 32-bit processor and more than 4
 	  gigabytes of physical RAM.
 
@@ -946,7 +946,7 @@ choice
 	prompt "Memory split" if EMBEDDED
 	default VMSPLIT_3G
 	depends on X86_32
-	help
+	---help---
 	  Select the desired split between kernel and user memory.
 
 	  If the address range available to the kernel is less than the
@@ -992,20 +992,20 @@ config HIGHMEM
 config X86_PAE
 	bool "PAE (Physical Address Extension) Support"
 	depends on X86_32 && !HIGHMEM4G
-	help
+	---help---
 	  PAE is required for NX support, and furthermore enables
 	  larger swapspace support for non-overcommit purposes. It
 	  has the cost of more pagetable lookup overhead, and also
 	  consumes more pagetable space per process.
 
 config ARCH_PHYS_ADDR_T_64BIT
-       def_bool X86_64 || X86_PAE
+	def_bool X86_64 || X86_PAE
 
 config DIRECT_GBPAGES
 	bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
 	default y
 	depends on X86_64
-	help
+	---help---
 	  Allow the kernel linear mapping to use 1GB pages on CPUs that
 	  support it. This can improve the kernel's performance a tiny bit by
 	  reducing TLB pressure. If in doubt, say "Y".
@@ -1016,7 +1016,7 @@ config NUMA
 	depends on SMP
 	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
 	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
-	help
+	---help---
 	  Enable NUMA (Non Uniform Memory Access) support.
 
 	  The kernel will try to allocate memory used by a CPU on the
@@ -1039,19 +1039,19 @@ config K8_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
 	depends on X86_64 && NUMA && PCI
-	help
-	 Enable K8 NUMA node topology detection.  You should say Y here if
-	 you have a multi processor AMD K8 system. This uses an old
-	 method to read the NUMA configuration directly from the builtin
-	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
-	 instead, which also takes priority if both are compiled in.
+	---help---
+	  Enable K8 NUMA node topology detection.  You should say Y here if
+	  you have a multi processor AMD K8 system. This uses an old
+	  method to read the NUMA configuration directly from the builtin
+	  Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
+	  instead, which also takes priority if both are compiled in.
 
 config X86_64_ACPI_NUMA
 	def_bool y
 	prompt "ACPI NUMA detection"
 	depends on X86_64 && NUMA && ACPI && PCI
 	select ACPI_NUMA
-	help
+	---help---
 	  Enable ACPI SRAT based node topology detection.
 
 # Some NUMA nodes have memory ranges that span
@@ -1066,7 +1066,7 @@ config NODES_SPAN_OTHER_NODES
 config NUMA_EMU
 	bool "NUMA emulation"
 	depends on X86_64 && NUMA
-	help
+	---help---
 	  Enable NUMA emulation. A flat machine will be split
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
@@ -1079,7 +1079,7 @@ config NODES_SHIFT
 	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
-	help
+	---help---
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
 
@@ -1134,61 +1134,61 @@ source "mm/Kconfig"
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
 	depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
-	help
+	---help---
 	  The VM uses one page table entry for each page of physical memory.
 	  For systems with a lot of RAM, this can be wasteful of precious
 	  low memory.  Setting this option will put user-space page table
 	  entries in high memory.
 
 config X86_CHECK_BIOS_CORRUPTION
-        bool "Check for low memory corruption"
-	help
-	 Periodically check for memory corruption in low memory, which
-	 is suspected to be caused by BIOS.  Even when enabled in the
-	 configuration, it is disabled at runtime.  Enable it by
-	 setting "memory_corruption_check=1" on the kernel command
-	 line.  By default it scans the low 64k of memory every 60
-	 seconds; see the memory_corruption_check_size and
-	 memory_corruption_check_period parameters in
-	 Documentation/kernel-parameters.txt to adjust this.
-
-	 When enabled with the default parameters, this option has
-	 almost no overhead, as it reserves a relatively small amount
-	 of memory and scans it infrequently.  It both detects corruption
-	 and prevents it from affecting the running system.
-
-	 It is, however, intended as a diagnostic tool; if repeatable
-	 BIOS-originated corruption always affects the same memory,
-	 you can use memmap= to prevent the kernel from using that
-	 memory.
+	bool "Check for low memory corruption"
+	---help---
+	  Periodically check for memory corruption in low memory, which
+	  is suspected to be caused by BIOS.  Even when enabled in the
+	  configuration, it is disabled at runtime.  Enable it by
+	  setting "memory_corruption_check=1" on the kernel command
+	  line.  By default it scans the low 64k of memory every 60
+	  seconds; see the memory_corruption_check_size and
+	  memory_corruption_check_period parameters in
+	  Documentation/kernel-parameters.txt to adjust this.
+
+	  When enabled with the default parameters, this option has
+	  almost no overhead, as it reserves a relatively small amount
+	  of memory and scans it infrequently.  It both detects corruption
+	  and prevents it from affecting the running system.
+
+	  It is, however, intended as a diagnostic tool; if repeatable
+	  BIOS-originated corruption always affects the same memory,
+	  you can use memmap= to prevent the kernel from using that
+	  memory.
 
 config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
-        bool "Set the default setting of memory_corruption_check"
+	bool "Set the default setting of memory_corruption_check"
 	depends on X86_CHECK_BIOS_CORRUPTION
 	default y
-	help
-	 Set whether the default state of memory_corruption_check is
-	 on or off.
+	---help---
+	  Set whether the default state of memory_corruption_check is
+	  on or off.
 
 config X86_RESERVE_LOW_64K
-        bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+	bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
 	default y
-	help
-	 Reserve the first 64K of physical RAM on BIOSes that are known
-	 to potentially corrupt that memory range. A numbers of BIOSes are
-	 known to utilize this area during suspend/resume, so it must not
-	 be used by the kernel.
+	---help---
+	  Reserve the first 64K of physical RAM on BIOSes that are known
+	  to potentially corrupt that memory range. A numbers of BIOSes are
+	  known to utilize this area during suspend/resume, so it must not
+	  be used by the kernel.
 
-	 Set this to N if you are absolutely sure that you trust the BIOS
-	 to get all its memory reservations and usages right.
+	  Set this to N if you are absolutely sure that you trust the BIOS
+	  to get all its memory reservations and usages right.
 
-	 If you have doubts about the BIOS (e.g. suspend/resume does not
-	 work or there's kernel crashes after certain hardware hotplug
-	 events) and it's not AMI or Phoenix, then you might want to enable
-	 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
-	 corruption patterns.
+	  If you have doubts about the BIOS (e.g. suspend/resume does not
+	  work or there's kernel crashes after certain hardware hotplug
+	  events) and it's not AMI or Phoenix, then you might want to enable
+	  X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+	  corruption patterns.
 
-	 Say Y if unsure.
+	  Say Y if unsure.
 
 config MATH_EMULATION
 	bool
@@ -1254,7 +1254,7 @@ config MTRR_SANITIZER
 	def_bool y
 	prompt "MTRR cleanup support"
 	depends on MTRR
-	help
+	---help---
 	  Convert MTRR layout from continuous to discrete, so X drivers can
 	  add writeback entries.
 
@@ -1269,7 +1269,7 @@ config MTRR_SANITIZER_ENABLE_DEFAULT
 	range 0 1
 	default "0"
 	depends on MTRR_SANITIZER
-	help
+	---help---
 	  Enable mtrr cleanup default value
 
 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
@@ -1277,7 +1277,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 	range 0 7
 	default "1"
 	depends on MTRR_SANITIZER
-	help
+	---help---
 	  mtrr cleanup spare entries default, it can be changed via
 	  mtrr_spare_reg_nr=N on the kernel command line.
 
@@ -1285,7 +1285,7 @@ config X86_PAT
 	bool
 	prompt "x86 PAT support"
 	depends on MTRR
-	help
+	---help---
 	  Use PAT attributes to setup page level cache control.
 
 	  PATs are the modern equivalents of MTRRs and are much more
@@ -1300,20 +1300,20 @@ config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
 	---help---
-	This enables the kernel to use EFI runtime services that are
-	available (such as the EFI variable services).
+	  This enables the kernel to use EFI runtime services that are
+	  available (such as the EFI variable services).
 
-	This option is only useful on systems that have EFI firmware.
-  	In addition, you should use the latest ELILO loader available
-  	at <http://elilo.sourceforge.net> in order to take advantage
-  	of EFI runtime services. However, even with this option, the
-  	resultant kernel should continue to boot on existing non-EFI
-  	platforms.
+	  This option is only useful on systems that have EFI firmware.
+	  In addition, you should use the latest ELILO loader available
+	  at <http://elilo.sourceforge.net> in order to take advantage
+	  of EFI runtime services. However, even with this option, the
+	  resultant kernel should continue to boot on existing non-EFI
+	  platforms.
 
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	help
+	---help---
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
@@ -1333,8 +1333,8 @@ config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
 	depends on X86_64
 	select CC_STACKPROTECTOR_ALL
-	help
-          This option turns on the -fstack-protector GCC feature. This
+	---help---
+	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
 	  the stack just before the return address, and validates
 	  the value just before actually returning.  Stack based buffer
@@ -1351,7 +1351,7 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call"
-	help
+	---help---
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but it is independent of the system firmware.   And like a reboot
@@ -1368,7 +1368,7 @@ config KEXEC
 config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
-	help
+	---help---
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
 	  which are loaded in the main kernel with kexec-tools into
@@ -1383,7 +1383,7 @@ config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	depends on KEXEC && HIBERNATION && X86_32
-	help
+	---help---
 	  Jump between original kernel and kexeced kernel and invoke
 	  code in physical address mode via KEXEC
 
@@ -1392,7 +1392,7 @@ config PHYSICAL_START
 	default "0x1000000" if X86_NUMAQ
 	default "0x200000" if X86_64
 	default "0x100000"
-	help
+	---help---
 	  This gives the physical address where the kernel is loaded.
 
 	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
@@ -1433,7 +1433,7 @@ config PHYSICAL_START
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	help
+	---help---
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
 	  The relocations tend to make the kernel binary about 10% larger,
@@ -1453,7 +1453,7 @@ config PHYSICAL_ALIGN
 	default "0x100000" if X86_32
 	default "0x200000" if X86_64
 	range 0x2000 0x400000
-	help
+	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
 	  address which meets above alignment restriction.
@@ -1486,7 +1486,7 @@ config COMPAT_VDSO
 	def_bool y
 	prompt "Compat VDSO support"
 	depends on X86_32 || IA32_EMULATION
-	help
+	---help---
 	  Map the 32-bit VDSO to the predictable old-style address too.
 	---help---
 	  Say N here if you are running a sufficiently recent glibc
@@ -1498,7 +1498,7 @@ config COMPAT_VDSO
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n
-	help
+	---help---
 	  Allow for specifying boot arguments to the kernel at
 	  build time.  On some systems (e.g. embedded ones), it is
 	  necessary or convenient to provide some or all of the
@@ -1516,7 +1516,7 @@ config CMDLINE
 	string "Built-in kernel command string"
 	depends on CMDLINE_BOOL
 	default ""
-	help
+	---help---
 	  Enter arguments here that should be compiled into the kernel
 	  image and used at boot time.  If the boot loader provides a
 	  command line at boot time, it is appended to this string to
@@ -1533,7 +1533,7 @@ config CMDLINE_OVERRIDE
 	bool "Built-in command line overrides boot loader arguments"
 	default n
 	depends on CMDLINE_BOOL
-	help
+	---help---
 	  Set this option to 'Y' to have the kernel ignore the boot loader
 	  command line, and use ONLY the built-in command line.
 
@@ -1632,7 +1632,7 @@ if APM
 
 config APM_IGNORE_USER_SUSPEND
 	bool "Ignore USER SUSPEND"
-	help
+	---help---
 	  This option will ignore USER SUSPEND requests. On machines with a
 	  compliant APM BIOS, you want to say N. However, on the NEC Versa M
 	  series notebooks, it is necessary to say Y because of a BIOS bug.
@@ -1656,7 +1656,7 @@ config APM_DO_ENABLE
 
 config APM_CPU_IDLE
 	bool "Make CPU Idle calls when idle"
-	help
+	---help---
 	  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
 	  On some machines, this can activate improved power savings, such as
 	  a slowed CPU clock rate, when the machine is idle. These idle calls
@@ -1667,7 +1667,7 @@ config APM_CPU_IDLE
 
 config APM_DISPLAY_BLANK
 	bool "Enable console blanking using APM"
-	help
+	---help---
 	  Enable console blanking using the APM. Some laptops can use this to
 	  turn off the LCD backlight when the screen blanker of the Linux
 	  virtual console blanks the screen. Note that this is only used by
@@ -1680,7 +1680,7 @@ config APM_DISPLAY_BLANK
 
 config APM_ALLOW_INTS
 	bool "Allow interrupts during APM BIOS calls"
-	help
+	---help---
 	  Normally we disable external interrupts while we are making calls to
 	  the APM BIOS as a measure to lessen the effects of a badly behaving
 	  BIOS implementation.  The BIOS should reenable interrupts if it
@@ -1705,7 +1705,7 @@ config PCI
 	bool "PCI support"
 	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-	help
+	---help---
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
@@ -1776,7 +1776,7 @@ config PCI_MMCONFIG
 config DMAR
 	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
 	depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
-	help
+	---help---
 	  DMA remapping (DMAR) devices support enables independent address
 	  translations for Direct Memory Access (DMA) from devices.
 	  These DMA remapping devices are reported via ACPI tables
@@ -1798,29 +1798,29 @@ config DMAR_GFX_WA
 	def_bool y
 	prompt "Support for Graphics workaround"
 	depends on DMAR
-	help
-	 Current Graphics drivers tend to use physical address
-	 for DMA and avoid using DMA APIs. Setting this config
-	 option permits the IOMMU driver to set a unity map for
-	 all the OS-visible memory. Hence the driver can continue
-	 to use physical addresses for DMA.
+	---help---
+	  Current Graphics drivers tend to use physical address
+	  for DMA and avoid using DMA APIs. Setting this config
+	  option permits the IOMMU driver to set a unity map for
+	  all the OS-visible memory. Hence the driver can continue
+	  to use physical addresses for DMA.
 
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
-	help
-	 Floppy disk drivers are know to bypass DMA API calls
-	 thereby failing to work when IOMMU is enabled. This
-	 workaround will setup a 1:1 mapping for the first
-	 16M to make floppy (an ISA device) work.
+	---help---
+	  Floppy disk drivers are know to bypass DMA API calls
+	  thereby failing to work when IOMMU is enabled. This
+	  workaround will setup a 1:1 mapping for the first
+	  16M to make floppy (an ISA device) work.
 
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
-	help
-	 Supports Interrupt remapping for IO-APIC and MSI devices.
-	 To use x2apic mode in the CPU's which support x2APIC enhancements or
-	 to support platforms with CPU's having > 8 bit APIC ID, say Y.
+	---help---
+	  Supports Interrupt remapping for IO-APIC and MSI devices.
+	  To use x2apic mode in the CPU's which support x2APIC enhancements or
+	  to support platforms with CPU's having > 8 bit APIC ID, say Y.
 
 source "drivers/pci/pcie/Kconfig"
 
@@ -1834,7 +1834,7 @@ if X86_32
 
 config ISA
 	bool "ISA support"
-	help
+	---help---
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
 	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
@@ -1861,7 +1861,7 @@ source "drivers/eisa/Kconfig"
 
 config MCA
 	bool "MCA support"
-	help
+	---help---
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
 	  laptops.  It is a bus system similar to PCI or ISA. See
 	  <file:Documentation/mca.txt> (and especially the web page given
@@ -1871,7 +1871,7 @@ source "drivers/mca/Kconfig"
 
 config SCx200
 	tristate "NatSemi SCx200 support"
-	help
+	---help---
 	  This provides basic support for National Semiconductor's
 	  (now AMD's) Geode processors.  The driver probes for the
 	  PCI-IDs of several on-chip devices, so its a good dependency
@@ -1883,7 +1883,7 @@ config SCx200HR_TIMER
 	tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
 	depends on SCx200 && GENERIC_TIME
 	default y
-	help
+	---help---
 	  This driver provides a clocksource built upon the on-chip
 	  27MHz high-resolution timer.  Its also a workaround for
 	  NSC Geode SC-1100's buggy TSC, which loses time when the
@@ -1894,7 +1894,7 @@ config GEODE_MFGPT_TIMER
 	def_bool y
 	prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
 	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-	help
+	---help---
 	  This driver provides a clock event source based on the MFGPT
 	  timer(s) in the CS5535 and CS5536 companion chip for the geode.
 	  MFGPTs have a better resolution and max interval than the
@@ -1903,7 +1903,7 @@ config GEODE_MFGPT_TIMER
 config OLPC
 	bool "One Laptop Per Child support"
 	default n
-	help
+	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
 
@@ -1928,16 +1928,16 @@ config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
 	select COMPAT_BINFMT_ELF
-	help
+	---help---
 	  Include code to run 32-bit programs under a 64-bit kernel. You should
 	  likely turn this on, unless you're 100% sure that you don't have any
 	  32-bit programs left.
 
 config IA32_AOUT
-       tristate "IA32 a.out support"
-       depends on IA32_EMULATION
-       help
-         Support old a.out binaries in the 32bit emulation.
+	tristate "IA32 a.out support"
+	depends on IA32_EMULATION
+	---help---
+	  Support old a.out binaries in the 32bit emulation.
 
 config COMPAT
 	def_bool y
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 085fef4d866..a95eaf0e582 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -50,7 +50,7 @@ config M386
 config M486
 	bool "486"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
 	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
@@ -59,7 +59,7 @@ config M486
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
 	  assume the RDTSC (Read Time Stamp Counter) instruction.
@@ -67,21 +67,21 @@ config M586
 config M586TSC
 	bool "Pentium-Classic"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
 	bool "Pentium-MMX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 
 config M686
 	bool "Pentium-Pro"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
 	  against the f00f bug found in earlier Pentiums.
@@ -89,7 +89,7 @@ config M686
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
 	  copy optimization, compiles the kernel with optimization flags
@@ -99,7 +99,7 @@ config MPENTIUMII
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
 	  extended prefetch instructions in addition to the Pentium II
@@ -108,14 +108,14 @@ config MPENTIUMIII
 config MPENTIUMM
 	bool "Pentium M"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
 	  Pentium-4 M (not Pentium M) chips.  This option enables compile
@@ -151,7 +151,7 @@ config MPENTIUM4
 config MK6
 	bool "K6/K6-II/K6-III"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
@@ -159,14 +159,14 @@ config MK6
 config MK7
 	bool "Athlon/Duron/K7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
 
 config MK8
 	bool "Opteron/Athlon64/Hammer/K8"
-	help
+	---help---
 	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
 	  Enables use of some extended instructions, and passes appropriate
 	  optimization flags to GCC.
@@ -174,7 +174,7 @@ config MK8
 config MCRUSOE
 	bool "Crusoe"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
 	  Pentium Pro with no alignment requirements).
@@ -182,13 +182,13 @@ config MCRUSOE
 config MEFFICEON
 	bool "Efficeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
 	bool "Winchip-C6"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.
@@ -196,7 +196,7 @@ config MWINCHIPC6
 config MWINCHIP3D
 	bool "Winchip-2/Winchip-2A/Winchip-3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.  Also enable out of order memory
@@ -206,19 +206,19 @@ config MWINCHIP3D
 config MGEODEGX1
 	bool "GeodeGX1"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
 	bool "Geode GX/LX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
 	  it lacks the cmov extension which gcc assumes is present when
@@ -230,7 +230,7 @@ config MCYRIXIII
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
 	  Note, this kernel will not boot on older (pre model 9) C3s.
@@ -238,14 +238,14 @@ config MVIAC3_2
 config MVIAC7
 	bool "VIA C7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 
 config MPSC
 	bool "Intel P4 / older Netburst based Xeon"
 	depends on X86_64
-	help
+	---help---
 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
 	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
 	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
@@ -255,7 +255,7 @@ config MPSC
 
 config MCORE2
 	bool "Core 2/newer Xeon"
-	help
+	---help---
 
 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
 	  53xx) CPUs. You can distinguish newer from older Xeons by the CPU
@@ -265,7 +265,7 @@ config MCORE2
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
-	help
+	---help---
 	  Generic x86-64 CPU.
 	  Run equally well on all x86-64 CPUs.
 
@@ -274,7 +274,7 @@ endchoice
 config X86_GENERIC
 	bool "Generic x86 support"
 	depends on X86_32
-	help
+	---help---
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -319,7 +319,7 @@ config X86_XADD
 config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
 	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	help
+	---help---
 	  Old PentiumPro multiprocessor systems had errata that could cause
 	  memory operations to violate the x86 ordering standard in rare cases.
 	  Enabling this option will attempt to work around some (but not all)
@@ -412,14 +412,14 @@ config X86_DEBUGCTLMSR
 
 menuconfig PROCESSOR_SELECT
 	bool "Supported processor vendors" if EMBEDDED
-	help
+	---help---
 	  This lets you choose what x86 vendor support code your kernel
 	  will include.
 
 config CPU_SUP_INTEL
 	default y
 	bool "Support Intel processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Intel processors
 
 	  You need this enabled if you want your kernel to run on an
@@ -433,7 +433,7 @@ config CPU_SUP_CYRIX_32
 	default y
 	bool "Support Cyrix processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Cyrix processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -446,7 +446,7 @@ config CPU_SUP_CYRIX_32
 config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for AMD processors
 
 	  You need this enabled if you want your kernel to run on an
@@ -460,7 +460,7 @@ config CPU_SUP_CENTAUR_32
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -474,7 +474,7 @@ config CPU_SUP_CENTAUR_64
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on 64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -488,7 +488,7 @@ config CPU_SUP_TRANSMETA_32
 	default y
 	bool "Support Transmeta processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Transmeta processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -502,7 +502,7 @@ config CPU_SUP_UMC_32
 	default y
 	bool "Support UMC processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for UMC processors
 
 	  You need this enabled if you want your kernel to run on a
@@ -521,7 +521,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
-	help
+	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 
 	  Debuggers may use it to collect an execution trace of the debugged
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index a38dd6064f1..ba4781b9389 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -7,7 +7,7 @@ source "lib/Kconfig.debug"
 
 config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
-	help
+	---help---
 	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
@@ -25,7 +25,7 @@ config STRICT_DEVMEM
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
-	help
+	---help---
 	  Enables the informational output from the decompression stage
 	  (e.g. bzImage) of the boot. If you disable this you will still
 	  see errors. Disable this if you want silent bootup.
@@ -33,7 +33,7 @@ config X86_VERBOSE_BOOTUP
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED
 	default y
-	help
+	---help---
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.
 
@@ -47,7 +47,7 @@ config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	default n
 	depends on EARLY_PRINTK && PCI
-	help
+	---help---
 	  Write kernel log output directly into the EHCI debug port.
 
 	  This is useful for kernel debugging when your machine crashes very
@@ -59,14 +59,14 @@ config EARLY_PRINTK_DBGP
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Enables the display of the minimum amount of free stack which each
 	  task has ever had available in the sysrq-T and sysrq-P debug output.
 
@@ -75,7 +75,7 @@ config DEBUG_STACK_USAGE
 config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
 	  of memory corruptions.
@@ -85,7 +85,7 @@ config DEBUG_PER_CPU_MAPS
 	depends on DEBUG_KERNEL
 	depends on SMP
 	default n
-	help
+	---help---
 	  Say Y to verify that the per_cpu map being accessed has
 	  been setup.  Adds a fair amount of code to kernel memory
 	  and decreases performance.
@@ -96,7 +96,7 @@ config X86_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
-	help
+	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -108,7 +108,7 @@ config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
 	default y
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Mark the kernel read-only data as write-protected in the pagetables,
 	  in order to catch accidental (and incorrect) writes to such const
 	  data. This is recommended so that we can catch kernel bugs sooner.
@@ -118,7 +118,7 @@ config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
 	default y
-	help
+	---help---
 	  This option enables a testcase for the DEBUG_RODATA
 	  feature as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"
@@ -126,7 +126,7 @@ config DEBUG_RODATA_TEST
 config DEBUG_NX_TEST
 	tristate "Testcase for the NX non-executable stack feature"
 	depends on DEBUG_KERNEL && m
-	help
+	---help---
 	  This option enables a testcase for the CPU NX capability
 	  and the software setup of this feature.
 	  If in doubt, say "N"
@@ -134,7 +134,7 @@ config DEBUG_NX_TEST
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on X86_32
-	help
+	---help---
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
 	  running more threads on a system and also reduces the pressure
@@ -145,7 +145,7 @@ config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
 	depends on X86_32
-	help
+	---help---
 	  This option allows trapping of rare doublefault exceptions that
 	  would otherwise cause a system to silently reboot. Disabling this
 	  option saves about 4k and might cause you much additional grey
@@ -155,7 +155,7 @@ config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
 	depends on GART_IOMMU && DEBUG_KERNEL
 	depends on X86_64
-	help
+	---help---
 	  Force the IOMMU to on even when you have less than 4GB of
 	  memory and add debugging code. On overflow always panic. And
 	  allow to enable IOMMU leak tracing. Can be disabled at boot
@@ -171,7 +171,7 @@ config IOMMU_LEAK
 	bool "IOMMU leak tracing"
 	depends on DEBUG_KERNEL
 	depends on IOMMU_DEBUG
-	help
+	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
@@ -224,25 +224,25 @@ choice
 
 config IO_DELAY_0X80
 	bool "port 0x80 based port-IO delay [recommended]"
-	help
+	---help---
 	  This is the traditional Linux IO delay used for in/out_p.
 	  It is the most tested hence safest selection here.
 
 config IO_DELAY_0XED
 	bool "port 0xed based port-IO delay"
-	help
+	---help---
 	  Use port 0xed as the IO delay. This frees up port 0x80 which is
 	  often used as a hardware-debug port.
 
 config IO_DELAY_UDELAY
 	bool "udelay based port-IO delay"
-	help
+	---help---
 	  Use udelay(2) as the IO delay method. This provides the delay
 	  while not having any side-effect on the IO port space.
 
 config IO_DELAY_NONE
 	bool "no port-IO delay"
-	help
+	---help---
 	  No port-IO delay. Will break on old boxes that require port-IO
 	  delay for certain operations. Should work on most new machines.
 
@@ -276,18 +276,18 @@ config DEBUG_BOOT_PARAMS
 	bool "Debug boot parameters"
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
-	help
+	---help---
 	  This option will cause struct boot_params to be exported via debugfs.
 
 config CPA_DEBUG
 	bool "CPA self-test code"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Do change_page_attr() self-tests every 30 seconds.
 
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	help
+	---help---
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
 	  do what it thinks is best, which is desirable for the gcc 3.x series of
@@ -300,4 +300,3 @@ config OPTIMIZE_INLINING
 	  If unsure, say N.
 
 endmenu
-
-- 
cgit v1.2.3


From 2678c07b07ac2076675e5d57653bdf02e9af1950 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Fri, 6 Feb 2009 20:46:06 +0530
Subject: Neither asm/types.h nor linux/types.h is required for
 arch/ia64/include/asm/fpu.h

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
 arch/ia64/include/asm/fpu.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
index b6395ad1500..0c26157cffa 100644
--- a/arch/ia64/include/asm/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
@@ -6,8 +6,6 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
-#include <linux/types.h>
-
 /* floating point status register: */
 #define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
 #define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
-- 
cgit v1.2.3


From a034a010f48bf49efe25098c16c16b9708ccbba5 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:43 -0800
Subject: x86: unify pte_none

Impact: cleanup

Unify and demacro pte_none.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-2level.h | 2 --
 arch/x86/include/asm/pgtable-3level.h | 5 -----
 arch/x86/include/asm/pgtable.h        | 5 +++++
 arch/x86/include/asm/pgtable_64.h     | 1 -
 4 files changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
index e0d199fe1d8..c1774ac9da7 100644
--- a/arch/x86/include/asm/pgtable-2level.h
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -53,8 +53,6 @@ static inline pte_t native_ptep_get_and_clear(pte_t *xp)
 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
 #endif
 
-#define pte_none(x)		(!(x).pte_low)
-
 /*
  * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
  * split up the 29 bits of offset into this range:
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 447da43cddb..07e0734f620 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -151,11 +151,6 @@ static inline int pte_same(pte_t a, pte_t b)
 	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
 }
 
-static inline int pte_none(pte_t pte)
-{
-	return !pte.pte_low && !pte.pte_high;
-}
-
 /*
  * Bits 0, 6 and 7 are taken in the low part of the pte,
  * put the 32 bits of offset into the high part.
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 06bbcbd66e9..841e573b27f 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -429,6 +429,11 @@ static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
 }
 #endif	/* CONFIG_PARAVIRT */
 
+static inline int pte_none(pte_t pte)
+{
+	return !pte.pte;
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index ba09289acca..5906a41e849 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -171,7 +171,6 @@ static inline int pmd_bad(pmd_t pmd)
 	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
-#define pte_none(x)	(!pte_val((x)))
 #define pte_present(x)	(pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
 
 #define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
-- 
cgit v1.2.3


From 8de01da35e9dbbb4a9d1e9d5a37df98395dfa558 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:44 -0800
Subject: x86: unify pte_same

Impact: cleanup

Unify and demacro pte_same.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 6 ------
 arch/x86/include/asm/pgtable.h        | 6 ++++++
 arch/x86/include/asm/pgtable_64.h     | 2 --
 3 files changed, 6 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 07e0734f620..51832fa0474 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -145,12 +145,6 @@ static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
 #endif
 
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t a, pte_t b)
-{
-	return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
-}
-
 /*
  * Bits 0, 6 and 7 are taken in the low part of the pte,
  * put the 32 bits of offset into the high part.
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 841e573b27f..e929d43753c 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -434,6 +434,12 @@ static inline int pte_none(pte_t pte)
 	return !pte.pte;
 }
 
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t a, pte_t b)
+{
+	return a.pte == b.pte;
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 5906a41e849..ff2571865bf 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -134,8 +134,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 	native_set_pgd(pgd, native_make_pgd(0));
 }
 
-#define pte_same(a, b)		((a).pte == (b).pte)
-
 #endif /* !__ASSEMBLY__ */
 
 #define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
-- 
cgit v1.2.3


From 7c683851d96c8313586c0695b25ca41bde9f0f73 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:45 -0800
Subject: x86: unify pte_present

Impact: cleanup

Unify and demacro pte_present.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 2 --
 arch/x86/include/asm/pgtable_64.h | 2 --
 3 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index e929d43753c..17fcc17d6b4 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -440,6 +440,11 @@ static inline int pte_same(pte_t a, pte_t b)
 	return a.pte == b.pte;
 }
 
+static inline int pte_present(pte_t a)
+{
+	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 72b020deb46..188073713fe 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -85,8 +85,6 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 /* The boot page tables (all created as a single array) */
 extern unsigned long pg0[];
 
-#define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
 /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
 #define pmd_none(x)	(!(unsigned long)pmd_val((x)))
 #define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index ff2571865bf..35b8dbc068e 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -169,8 +169,6 @@ static inline int pmd_bad(pmd_t pmd)
 	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
-#define pte_present(x)	(pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
 #define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
 
 /*
-- 
cgit v1.2.3


From 5ba7c91341be61e0942f792c237ac067d9f32f51 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:48 -0800
Subject: x86: unify pud_present

Impact: cleanup

Unify and demacro pud_present.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 5 -----
 arch/x86/include/asm/pgtable.h        | 7 +++++++
 arch/x86/include/asm/pgtable_64.h     | 1 -
 3 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 51832fa0474..524bd91b995 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -28,11 +28,6 @@ static inline int pud_bad(pud_t pud)
 	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
 }
 
-static inline int pud_present(pud_t pud)
-{
-	return pud_val(pud) & _PAGE_PRESENT;
-}
-
 /* Rules for using set_pte: the pte being assigned *must* be
  * either not present or in a state where the hardware will
  * not attempt to update the pte.  In places where this is
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 17fcc17d6b4..c117b28df15 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -445,6 +445,13 @@ static inline int pte_present(pte_t a)
 	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
 }
 
+#if PAGETABLE_LEVELS > 2
+static inline int pud_present(pud_t pud)
+{
+	return pud_val(pud) & _PAGE_PRESENT;
+}
+#endif	/* PAGETABLE_LEVELS > 2 */
+
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 35b8dbc068e..acdc27b202c 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -194,7 +194,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 #define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 #define pud_offset(pgd, address)					\
 	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
-#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
 
 static inline int pud_large(pud_t pte)
 {
-- 
cgit v1.2.3


From 9f38d7e85e914f10a875f65d283432d55a12fc27 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:49 -0800
Subject: x86: unify pgd_present

Impact: cleanup

Unify and demacro pgd_present.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 7 +++++++
 arch/x86/include/asm/pgtable_64.h | 1 -
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index c117b28df15..339e49a9bb6 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -452,6 +452,13 @@ static inline int pud_present(pud_t pud)
 }
 #endif	/* PAGETABLE_LEVELS > 2 */
 
+#if PAGETABLE_LEVELS > 3
+static inline int pgd_present(pgd_t pgd)
+{
+	return pgd_val(pgd) & _PAGE_PRESENT;
+}
+#endif	/* PAGETABLE_LEVELS > 3 */
+
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index acdc27b202c..447634698f5 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -182,7 +182,6 @@ static inline int pmd_bad(pmd_t pmd)
 #define pgd_page_vaddr(pgd)						\
 	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
 #define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
-#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
 static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
 
-- 
cgit v1.2.3


From 649e8ef60fac0a2f6960cdb090d73e78717ac065 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:50 -0800
Subject: x86: unify pmd_present

Impact: cleanup

Unify and demacro pmd_present.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 1 -
 arch/x86/include/asm/pgtable_64.h | 1 -
 3 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 339e49a9bb6..147d3f097ab 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -445,6 +445,11 @@ static inline int pte_present(pte_t a)
 	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
 }
 
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) & _PAGE_PRESENT;
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 188073713fe..f35160730b6 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -87,7 +87,6 @@ extern unsigned long pg0[];
 
 /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
 #define pmd_none(x)	(!(unsigned long)pmd_val((x)))
-#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
 #define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
 
 #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 447634698f5..471b3058f3d 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -208,7 +208,6 @@ static inline int pud_large(pud_t pte)
 #define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
 				  pmd_index(address))
 #define pmd_none(x)	(!pmd_val((x)))
-#define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
 #define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
 #define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
 
-- 
cgit v1.2.3


From 4fea801ac95d6534a93aa01d3ac62be163d845af Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:51 -0800
Subject: x86: unify pmd_none

Impact: cleanup

Unify and demacro pmd_none.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 7 +++++++
 arch/x86/include/asm/pgtable_32.h | 2 --
 arch/x86/include/asm/pgtable_64.h | 1 -
 3 files changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 147d3f097ab..2f38bbee77e 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -450,6 +450,13 @@ static inline int pmd_present(pmd_t pmd)
 	return pmd_val(pmd) & _PAGE_PRESENT;
 }
 
+static inline int pmd_none(pmd_t pmd)
+{
+	/* Only check low word on 32-bit platforms, since it might be
+	   out of sync with upper half. */
+	return !(unsigned long)native_pmd_val(pmd);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index f35160730b6..26e73569223 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -85,8 +85,6 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 /* The boot page tables (all created as a single array) */
 extern unsigned long pg0[];
 
-/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
-#define pmd_none(x)	(!(unsigned long)pmd_val((x)))
 #define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
 
 #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 471b3058f3d..f3ad8943324 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -207,7 +207,6 @@ static inline int pud_large(pud_t pte)
 #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
 #define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
 				  pmd_index(address))
-#define pmd_none(x)	(!pmd_val((x)))
 #define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
 #define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
 
-- 
cgit v1.2.3


From c5f040b12b2381591932a007432e7ed86b3f2796 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:52 -0800
Subject: x86: unify pgd_page_vaddr

Impact: cleanup

Unify and demacro pgd_page_vaddr.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_64.h | 2 --
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 2f38bbee77e..cca4321e076 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -469,6 +469,11 @@ static inline int pgd_present(pgd_t pgd)
 {
 	return pgd_val(pgd) & _PAGE_PRESENT;
 }
+
+static inline unsigned long pgd_page_vaddr(pgd_t pgd)
+{
+	return (unsigned long)__va((unsigned long)pgd_val(pgd) & PTE_PFN_MASK);
+}
 #endif	/* PAGETABLE_LEVELS > 3 */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index f3ad8943324..4f8dbb99b69 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -179,8 +179,6 @@ static inline int pmd_bad(pmd_t pmd)
 /*
  * Level 4 access.
  */
-#define pgd_page_vaddr(pgd)						\
-	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
 #define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
 static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
-- 
cgit v1.2.3


From 6fff47e3ac5e17f7e164ac4ff9ea29aba3c54d73 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:53 -0800
Subject: x86: unify pud_page_vaddr

Impact: cleanup

Unify and demacro pud_page_vaddr.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 3 ---
 arch/x86/include/asm/pgtable.h        | 5 +++++
 arch/x86/include/asm/pgtable_64.h     | 2 --
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 524bd91b995..542616ac192 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -117,9 +117,6 @@ static inline void pud_clear(pud_t *pudp)
 
 #define pud_page(pud) pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
 
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
-
-
 /* Find an entry in the second-level page table.. */
 #define pmd_offset(pud, address) ((pmd_t *)pud_page_vaddr(*(pud)) +	\
 				  pmd_index(address))
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index cca4321e076..4638b4af675 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -462,6 +462,11 @@ static inline int pud_present(pud_t pud)
 {
 	return pud_val(pud) & _PAGE_PRESENT;
 }
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 4f8dbb99b69..9875e40c058 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -185,8 +185,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 
 /* PUD - Level3 access */
 /* to find an entry in a page-table-directory. */
-#define pud_page_vaddr(pud)						\
-	((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
 #define pud_page(pud)	(pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
 #define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 #define pud_offset(pgd, address)					\
-- 
cgit v1.2.3


From aca159dbb13a5221819d5b3849b8c013f4829e9e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:54 -0800
Subject: x86: include pgtable_SIZE.h earlier

We'll need the definitions sooner.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 4638b4af675..bd38feb3492 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -429,6 +429,16 @@ static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
 }
 #endif	/* CONFIG_PARAVIRT */
 
+#endif	/* __ASSEMBLY__ */
+
+#ifdef CONFIG_X86_32
+# include "pgtable_32.h"
+#else
+# include "pgtable_64.h"
+#endif
+
+#ifndef __ASSEMBLY__
+
 static inline int pte_none(pte_t pte)
 {
 	return !pte.pte;
@@ -483,12 +493,6 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
 
 #endif	/* __ASSEMBLY__ */
 
-#ifdef CONFIG_X86_32
-# include "pgtable_32.h"
-#else
-# include "pgtable_64.h"
-#endif
-
 /*
  * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
  *
-- 
cgit v1.2.3


From f476961cb16312fe4cb80b2b457ef9acf220a7fc Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:55 -0800
Subject: x86: unify pud_page

Impact: cleanup

Unify and demacro pud_page.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 2 --
 arch/x86/include/asm/pgtable.h        | 6 ++++++
 arch/x86/include/asm/pgtable_64.h     | 1 -
 3 files changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 542616ac192..28ba09ac230 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -115,8 +115,6 @@ static inline void pud_clear(pud_t *pudp)
 		write_cr3(pgd);
 }
 
-#define pud_page(pud) pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
-
 /* Find an entry in the second-level page table.. */
 #define pmd_offset(pud, address) ((pmd_t *)pud_page_vaddr(*(pud)) +	\
 				  pmd_index(address))
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index bd38feb3492..a871ae55a5c 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -438,6 +438,7 @@ static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
 #endif
 
 #ifndef __ASSEMBLY__
+#include <linux/mm_types.h>
 
 static inline int pte_none(pte_t pte)
 {
@@ -477,6 +478,11 @@ static inline unsigned long pud_page_vaddr(pud_t pud)
 {
 	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
 }
+
+static inline struct page *pud_page(pud_t pud)
+{
+	return pfn_to_page(pud_val(pud) >> PAGE_SHIFT);
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 9875e40c058..7edacc7ec89 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -185,7 +185,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 
 /* PUD - Level3 access */
 /* to find an entry in a page-table-directory. */
-#define pud_page(pud)	(pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
 #define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 #define pud_offset(pgd, address)					\
 	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
-- 
cgit v1.2.3


From 777cba16aac5a1096db0b936912eb7fd06fb0cc5 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:56 -0800
Subject: x86: unify pgd_page

Impact: cleanup

Unify and demacro pgd_page.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_64.h | 1 -
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index a871ae55a5c..c1a36dd1e59 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -495,6 +495,11 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
 {
 	return (unsigned long)__va((unsigned long)pgd_val(pgd) & PTE_PFN_MASK);
 }
+
+static inline struct page *pgd_page(pgd_t pgd)
+{
+	return pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT);
+}
 #endif	/* PAGETABLE_LEVELS > 3 */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 7edacc7ec89..02477ad40fc 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -179,7 +179,6 @@ static inline int pmd_bad(pmd_t pmd)
 /*
  * Level 4 access.
  */
-#define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
 static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
 
-- 
cgit v1.2.3


From 7cfb81024bc1dbe8ad2bf5affd58a6a7ad4172ba Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:57 -0800
Subject: x86: unify pud_index

Impact: cleanup

Unify and demacro pud_index.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 6 ++++++
 arch/x86/include/asm/pgtable_64.h | 2 --
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index c1a36dd1e59..a51a97ade63 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -500,6 +500,12 @@ static inline struct page *pgd_page(pgd_t pgd)
 {
 	return pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT);
 }
+
+/* to find an entry in a page-table-directory. */
+static inline unsigned pud_index(unsigned long address)
+{
+	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
+}
 #endif	/* PAGETABLE_LEVELS > 3 */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 02477ad40fc..c17c30f5751 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -183,8 +183,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
 
 /* PUD - Level3 access */
-/* to find an entry in a page-table-directory. */
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 #define pud_offset(pgd, address)					\
 	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
 
-- 
cgit v1.2.3


From 3d081b1812bd4de2bbef58c6d598ddf45493010e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:58 -0800
Subject: x86: unify pud_offset

Impact: cleanup

Unify and demacro pud_offset.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_64.h | 2 --
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index a51a97ade63..decccb0a641 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -506,6 +506,11 @@ static inline unsigned pud_index(unsigned long address)
 {
 	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
 }
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+	return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(address);
+}
 #endif	/* PAGETABLE_LEVELS > 3 */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index c17c30f5751..958dc1e7335 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -183,8 +183,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
 
 /* PUD - Level3 access */
-#define pud_offset(pgd, address)					\
-	((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
 
 static inline int pud_large(pud_t pte)
 {
-- 
cgit v1.2.3


From 3ffb3564cd3cd59de8a0d74430ffe2d43ae11f19 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:30:59 -0800
Subject: x86: unify pmd_page_vaddr

Impact: cleanup

Unify and demacro pmd_page_vaddr.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 3 ---
 arch/x86/include/asm/pgtable_64.h | 1 -
 3 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index decccb0a641..3789c05bf30 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -468,6 +468,11 @@ static inline int pmd_none(pmd_t pmd)
 	return !(unsigned long)native_pmd_val(pmd);
 }
 
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 26e73569223..f7f7e297a0a 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -126,9 +126,6 @@ static inline int pud_large(pud_t pud) { return 0; }
 
 #define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
 
-#define pmd_page_vaddr(pmd)					\
-	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
-
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
 	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 958dc1e7335..7a510e8a878 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -191,7 +191,6 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
 #define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
 
 #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-- 
cgit v1.2.3


From 20063ca4eb26d4b10f01d59925deea4aeee415e8 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:00 -0800
Subject: x86: unify pmd_page

Impact: cleanup

Unify and demacro pmd_page.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 2 --
 arch/x86/include/asm/pgtable_64.h | 2 --
 3 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3789c05bf30..38330d6288f 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -473,6 +473,11 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
 }
 
+static inline struct page *pmd_page(pmd_t pmd)
+{
+	return pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index f7f7e297a0a..8714110b4a7 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -124,8 +124,6 @@ static inline int pud_large(pud_t pud) { return 0; }
 #define pte_offset_kernel(dir, address)				\
 	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
 
-#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
 	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 7a510e8a878..97f24d2d60d 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -191,8 +191,6 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
 #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
 #define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
 				  pmd_index(address))
-- 
cgit v1.2.3


From e24d7eee0beda24504bf6a4aa03be68328557475 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:01 -0800
Subject: x86: unify pmd_index

Impact: cleanup

Unify and demacro pmd_index.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 11 +++++++++++
 arch/x86/include/asm/pgtable_32.h |  9 ---------
 arch/x86/include/asm/pgtable_64.h |  1 -
 3 files changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 38330d6288f..4ec24b6d099 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -478,6 +478,17 @@ static inline struct page *pmd_page(pmd_t pmd)
 	return pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT);
 }
 
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+static inline unsigned pmd_index(unsigned long address)
+{
+	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 8714110b4a7..40b066215bb 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -104,15 +104,6 @@ extern unsigned long pg0[];
 
 static inline int pud_large(pud_t pud) { return 0; }
 
-/*
- * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
- *
- * this macro returns the index of the entry in the pmd page which would
- * control the given virtual address
- */
-#define pmd_index(address)				\
-	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-
 /*
  * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
  *
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 97f24d2d60d..15f42d6ee2f 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -191,7 +191,6 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
 #define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
 				  pmd_index(address))
 #define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
-- 
cgit v1.2.3


From 01ade20d5a22e6ef002cbb751dddc3a01a78f998 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:02 -0800
Subject: x86: unify pmd_offset

Impact: cleanup

Unify and demacro pmd_offset.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 4 ----
 arch/x86/include/asm/pgtable.h        | 6 ++++++
 arch/x86/include/asm/pgtable_64.h     | 2 --
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 28ba09ac230..7ad9d05710b 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -115,10 +115,6 @@ static inline void pud_clear(pud_t *pudp)
 		write_cr3(pgd);
 }
 
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *)pud_page_vaddr(*(pud)) +	\
-				  pmd_index(address))
-
 #ifdef CONFIG_SMP
 static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
 {
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 4ec24b6d099..a7dbb05075d 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -504,6 +504,12 @@ static inline struct page *pud_page(pud_t pud)
 {
 	return pfn_to_page(pud_val(pud) >> PAGE_SHIFT);
 }
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 15f42d6ee2f..78269656cf0 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -191,8 +191,6 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
-				  pmd_index(address))
 #define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
 #define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
 
-- 
cgit v1.2.3


From bd44d64db1db6acf2dea9ba130b8cb0a54e1dabd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:03 -0800
Subject: x86: remove redundant pfn_pmd definition

Impact: cleanup

It's already defined in pgtable.h

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable_64.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 78269656cf0..6cc4133705b 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -191,7 +191,6 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
 #define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
 
 #define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
-- 
cgit v1.2.3


From 3180fba0eec0d14e4ac8183a90d643d0d3383c75 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:04 -0800
Subject: x86: unify pmd_pfn

Impact: cleanup

Unify and demacro pmd_pfn.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_64.h | 2 --
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index a7dbb05075d..532144c2f1c 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -510,6 +510,11 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
 {
 	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
 }
+
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 6cc4133705b..279ddc6a4eb 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -191,8 +191,6 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_pfn(x)  ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
-
 #define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
 #define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) |	\
 					    _PAGE_FILE })
-- 
cgit v1.2.3


From 97e2817d3423d753fd2f80ea936a370032846382 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:05 -0800
Subject: x86: unify pmd_pfn

Impact: cleanup

Unify pmd_pfn.  Unfortunately it can't be demacroed because it has a
cyclic dependency on linux/mm.h:page_to_nid().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 9 +++++++++
 arch/x86/include/asm/pgtable_32.h | 7 -------
 arch/x86/include/asm/pgtable_64.h | 3 ---
 3 files changed, 9 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 532144c2f1c..49b5cff78c2 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -489,6 +489,15 @@ static inline unsigned pmd_index(unsigned long address)
 	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
 }
 
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * (Currently stuck as a macro because of indirect forward reference
+ * to linux/mm.h:page_to_nid())
+ */
+#define mk_pte(page, pgprot)   pfn_pte(page_to_pfn(page), (pgprot))
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 40b066215bb..6335be843c1 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -95,13 +95,6 @@ extern unsigned long pg0[];
 # include <asm/pgtable-2level.h>
 #endif
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-
 static inline int pud_large(pud_t pud) { return 0; }
 
 /*
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 279ddc6a4eb..adce05628a0 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -198,9 +198,6 @@ static inline int pud_large(pud_t pte)
 
 /* PTE - Level 1 access. */
 
-/* page, protection -> pte */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn((page)), (pgprot))
-
 #define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 #define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
 					 pte_index((address)))
-- 
cgit v1.2.3


From 346309cff6127a38731cf102de3413a562700b84 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:06 -0800
Subject: x86: unify pte_index

Impact: cleanup

Unify and demacro pte_index.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 11 +++++++++++
 arch/x86/include/asm/pgtable_32.h |  8 --------
 arch/x86/include/asm/pgtable_64.h |  1 -
 3 files changed, 11 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 49b5cff78c2..10a8c2e5178 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -498,6 +498,17 @@ static inline unsigned pmd_index(unsigned long address)
  */
 #define mk_pte(page, pgprot)   pfn_pte(page_to_pfn(page), (pgprot))
 
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this function returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+static inline unsigned pte_index(unsigned long address)
+{
+	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 6335be843c1..00d298e14a8 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -97,14 +97,6 @@ extern unsigned long pg0[];
 
 static inline int pud_large(pud_t pud) { return 0; }
 
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address)					\
-	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 #define pte_offset_kernel(dir, address)				\
 	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
 
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index adce05628a0..e7321bc8aa8 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -198,7 +198,6 @@ static inline int pud_large(pud_t pte)
 
 /* PTE - Level 1 access. */
 
-#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 #define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
 					 pte_index((address)))
 
-- 
cgit v1.2.3


From 3fbc2444f465710cdf0c832461a6a14338437453 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:07 -0800
Subject: x86: unify pte_offset_kernel

Impact: cleanup

Unify and demacro pte_offset_kernel.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 3 ---
 arch/x86/include/asm/pgtable_64.h | 3 ---
 3 files changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 10a8c2e5178..c61b37af1f2 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -509,6 +509,11 @@ static inline unsigned pte_index(unsigned long address)
 	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
 }
 
+static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
+{
+	return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 00d298e14a8..133fc4e4529 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -97,9 +97,6 @@ extern unsigned long pg0[];
 
 static inline int pud_large(pud_t pud) { return 0; }
 
-#define pte_offset_kernel(dir, address)				\
-	((pte_t *)pmd_page_vaddr(*(dir)) +  pte_index((address)))
-
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
 	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index e7321bc8aa8..a8bfb75c76a 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -198,9 +198,6 @@ static inline int pud_large(pud_t pte)
 
 /* PTE - Level 1 access. */
 
-#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
-					 pte_index((address)))
-
 /* x86-64 always has all page tables mapped. */
 #define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
 #define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
-- 
cgit v1.2.3


From 3f6cbef1d7f474d16f3a824c6d2910d930778fbd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:08 -0800
Subject: x86: unify pud_large

Impact: cleanup

Unify and demacro pud_large.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 6 ++++++
 arch/x86/include/asm/pgtable_32.h | 2 --
 arch/x86/include/asm/pgtable_64.h | 6 ------
 3 files changed, 6 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index c61b37af1f2..0c734e2a90c 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -540,6 +540,12 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
 {
 	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
+
+static inline int pud_large(pud_t pud)
+{
+	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+		(_PAGE_PSE | _PAGE_PRESENT);
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 133fc4e4529..ad7830bdc9a 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -95,8 +95,6 @@ extern unsigned long pg0[];
 # include <asm/pgtable-2level.h>
 #endif
 
-static inline int pud_large(pud_t pud) { return 0; }
-
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
 	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) +		\
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index a8bfb75c76a..a85ac14df35 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -184,12 +184,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 
 /* PUD - Level3 access */
 
-static inline int pud_large(pud_t pte)
-{
-	return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
-		(_PAGE_PSE | _PAGE_PRESENT);
-}
-
 /* PMD  - Level 2 access */
 #define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
 #define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) |	\
-- 
cgit v1.2.3


From 30f103167fcf2b08de64f5f37ece6bfff7392290 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:09 -0800
Subject: x86: unify pgd_bad

Impact: cleanup

Unify and demacro pgd_bad.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_64.h | 5 -----
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0c734e2a90c..ebcb60e6a96 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -574,6 +574,11 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
 {
 	return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(address);
 }
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
 #endif	/* PAGETABLE_LEVELS > 3 */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index a85ac14df35..1dfc44932f6 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -154,11 +154,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 #ifndef __ASSEMBLY__
 
-static inline int pgd_bad(pgd_t pgd)
-{
-	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
 static inline int pud_bad(pud_t pud)
 {
 	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-- 
cgit v1.2.3


From a61bb29af47b0e4052566d25f3391894306a23fd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:10 -0800
Subject: x86: unify pgd_bad

Impact: cleanup

Unify and demacro pgd_bad.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 5 -----
 arch/x86/include/asm/pgtable.h        | 5 +++++
 arch/x86/include/asm/pgtable_64.h     | 5 -----
 3 files changed, 5 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 7ad9d05710b..b92524eec20 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -23,11 +23,6 @@ static inline int pud_none(pud_t pud)
 	return pud_val(pud) == 0;
 }
 
-static inline int pud_bad(pud_t pud)
-{
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
-}
-
 /* Rules for using set_pte: the pte being assigned *must* be
  * either not present or in a state where the hardware will
  * not attempt to update the pte.  In places where this is
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index ebcb60e6a96..38882f6cc82 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -546,6 +546,11 @@ static inline int pud_large(pud_t pud)
 	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
 		(_PAGE_PSE | _PAGE_PRESENT);
 }
+
+static inline int pud_bad(pud_t pud)
+{
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 1dfc44932f6..fe8be33df3d 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -154,11 +154,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 #ifndef __ASSEMBLY__
 
-static inline int pud_bad(pud_t pud)
-{
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
 static inline int pmd_bad(pmd_t pmd)
 {
 	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-- 
cgit v1.2.3


From 99510238bb428091e7caba020bc5e18b5f30b619 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:11 -0800
Subject: x86: unify pmd_bad

Impact: cleanup

Unify and demacro pmd_bad.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 2 --
 arch/x86/include/asm/pgtable_64.h | 5 -----
 3 files changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 38882f6cc82..72bf53ef60b 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -514,6 +514,11 @@ static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
 	return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
 }
 
+static inline int pmd_bad(pmd_t pmd)
+{
+	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index ad7830bdc9a..5362632df75 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -85,8 +85,6 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 /* The boot page tables (all created as a single array) */
 extern unsigned long pg0[];
 
-#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
 #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
 
 #ifdef CONFIG_X86_PAE
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index fe8be33df3d..d230e28a5f3 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -154,11 +154,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 #ifndef __ASSEMBLY__
 
-static inline int pmd_bad(pmd_t pmd)
-{
-	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
 #define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
 
 /*
-- 
cgit v1.2.3


From cc290ca38cc4c78b0d6175633232f05b8d8732ab Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:12 -0800
Subject: x86: unify pages_to_mb

Impact: cleanup

Unify and demacro pages_to_mb.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_32.h | 2 --
 arch/x86/include/asm/pgtable_64.h | 2 --
 3 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 72bf53ef60b..d4cbc8188c8 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -519,6 +519,11 @@ static inline int pmd_bad(pmd_t pmd)
 	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
+static inline unsigned long pages_to_mb(unsigned long npg)
+{
+	return npg >> (20 - PAGE_SHIFT);
+}
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_present(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 5362632df75..10c71abae07 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -85,8 +85,6 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 /* The boot page tables (all created as a single array) */
 extern unsigned long pg0[];
 
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
 #ifdef CONFIG_X86_PAE
 # include <asm/pgtable-3level.h>
 #else
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index d230e28a5f3..6c6c3c34bc5 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -154,8 +154,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 #ifndef __ASSEMBLY__
 
-#define pages_to_mb(x)	((x) >> (20 - PAGE_SHIFT))   /* FIXME: is this right? */
-
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
-- 
cgit v1.2.3


From deb79cfb365c96ff960570d1bcf2c205424b6195 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:13 -0800
Subject: x86: unify pud_none

Impact: cleanup

Unify and demacro pud_none.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-3level.h | 5 -----
 arch/x86/include/asm/pgtable.h        | 5 +++++
 arch/x86/include/asm/pgtable_64.h     | 1 -
 3 files changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index b92524eec20..3f13cdf6115 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -18,11 +18,6 @@
 	printk("%s:%d: bad pgd %p(%016Lx).\n",				\
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
-static inline int pud_none(pud_t pud)
-{
-	return pud_val(pud) == 0;
-}
-
 /* Rules for using set_pte: the pte being assigned *must* be
  * either not present or in a state where the hardware will
  * not attempt to update the pte.  In places where this is
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index d4cbc8188c8..0ef49f3ebc8 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -525,6 +525,11 @@ static inline unsigned long pages_to_mb(unsigned long npg)
 }
 
 #if PAGETABLE_LEVELS > 2
+static inline int pud_none(pud_t pud)
+{
+	return pud_val(pud) == 0;
+}
+
 static inline int pud_present(pud_t pud)
 {
 	return pud_val(pud) & _PAGE_PRESENT;
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 6c6c3c34bc5..d58c2ee15c3 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -68,7 +68,6 @@ extern void paging_init(void);
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
 #define pgd_none(x)	(!pgd_val(x))
-#define pud_none(x)	(!pud_val(x))
 
 struct mm_struct;
 
-- 
cgit v1.2.3


From 7325cc2e333cdaaabd2103552458876ea85adb33 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:14 -0800
Subject: x86: unify pgd_none

Impact: cleanup

Unify and demacro pgd_none.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 5 +++++
 arch/x86/include/asm/pgtable_64.h | 2 --
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0ef49f3ebc8..18afcd31e76 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -599,6 +599,11 @@ static inline int pgd_bad(pgd_t pgd)
 {
 	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
+
+static inline int pgd_none(pgd_t pgd)
+{
+	return !pgd_val(pgd);
+}
 #endif	/* PAGETABLE_LEVELS > 3 */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index d58c2ee15c3..3b92a4ca403 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -67,8 +67,6 @@ extern void paging_init(void);
 	printk("%s:%d: bad pgd %p(%016lx).\n",		\
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
-#define pgd_none(x)	(!pgd_val(x))
-
 struct mm_struct;
 
 void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
-- 
cgit v1.2.3


From 6cf7150084500962b8e225e2409ec01ed06a2c71 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:15 -0800
Subject: x86: unify io_remap_pfn_range

Impact: cleanup

Unify io_remap_pfn_range.  Don't demacro yet.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h    | 3 +++
 arch/x86/include/asm/pgtable_32.h | 3 ---
 arch/x86/include/asm/pgtable_64.h | 3 ---
 3 files changed, 3 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 18afcd31e76..9754d06ffe6 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -524,6 +524,9 @@ static inline unsigned long pages_to_mb(unsigned long npg)
 	return npg >> (20 - PAGE_SHIFT);
 }
 
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_none(pud_t pud)
 {
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 10c71abae07..1952bb762aa 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -133,7 +133,4 @@ do {						\
 #define kern_addr_valid(kaddr)	(0)
 #endif
 
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
 #endif /* _ASM_X86_PGTABLE_32_H */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 3b92a4ca403..100ac483a0b 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -205,9 +205,6 @@ extern int direct_gbpages;
 extern int kern_addr_valid(unsigned long addr);
 extern void cleanup_highmap(void);
 
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 
-- 
cgit v1.2.3


From 18a7a199f97a7509fb987722e543f1aac3d7ada5 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:16 -0800
Subject: x86: add and use pgd/pud/pmd_flags

Add pgd/pud/pmd_flags which are analogous to pte_flags, and use them
where-ever we only care about testing the flags portions of the
respective entries.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/page.h    | 15 +++++++++++++++
 arch/x86/include/asm/pgtable.h | 16 ++++++++--------
 2 files changed, 23 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index e9873a2e869..0b16b64a8fe 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -95,6 +95,11 @@ static inline pgdval_t native_pgd_val(pgd_t pgd)
 	return pgd.pgd;
 }
 
+static inline pgdval_t pgd_flags(pgd_t pgd)
+{
+	return native_pgd_val(pgd) & PTE_FLAGS_MASK;
+}
+
 #if PAGETABLE_LEVELS >= 3
 #if PAGETABLE_LEVELS == 4
 typedef struct { pudval_t pud; } pud_t;
@@ -117,6 +122,11 @@ static inline pudval_t native_pud_val(pud_t pud)
 }
 #endif	/* PAGETABLE_LEVELS == 4 */
 
+static inline pudval_t pud_flags(pud_t pud)
+{
+	return native_pud_val(pud) & PTE_FLAGS_MASK;
+}
+
 typedef struct { pmdval_t pmd; } pmd_t;
 
 static inline pmd_t native_make_pmd(pmdval_t val)
@@ -128,6 +138,11 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 {
 	return pmd.pmd;
 }
+
+static inline pmdval_t pmd_flags(pmd_t pmd)
+{
+	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+}
 #else  /* PAGETABLE_LEVELS == 2 */
 #include <asm-generic/pgtable-nopmd.h>
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 9754d06ffe6..c811d76d6fd 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -236,7 +236,7 @@ static inline unsigned long pte_pfn(pte_t pte)
 
 static inline int pmd_large(pmd_t pte)
 {
-	return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+	return (pmd_flags(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
 		(_PAGE_PSE | _PAGE_PRESENT);
 }
 
@@ -458,7 +458,7 @@ static inline int pte_present(pte_t a)
 
 static inline int pmd_present(pmd_t pmd)
 {
-	return pmd_val(pmd) & _PAGE_PRESENT;
+	return pmd_flags(pmd) & _PAGE_PRESENT;
 }
 
 static inline int pmd_none(pmd_t pmd)
@@ -516,7 +516,7 @@ static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
 
 static inline int pmd_bad(pmd_t pmd)
 {
-	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pmd_flags(pmd) & ~_PAGE_USER) != _KERNPG_TABLE;
 }
 
 static inline unsigned long pages_to_mb(unsigned long npg)
@@ -535,7 +535,7 @@ static inline int pud_none(pud_t pud)
 
 static inline int pud_present(pud_t pud)
 {
-	return pud_val(pud) & _PAGE_PRESENT;
+	return pud_flags(pud) & _PAGE_PRESENT;
 }
 
 static inline unsigned long pud_page_vaddr(pud_t pud)
@@ -561,20 +561,20 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
 
 static inline int pud_large(pud_t pud)
 {
-	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+	return (pud_flags(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
 		(_PAGE_PSE | _PAGE_PRESENT);
 }
 
 static inline int pud_bad(pud_t pud)
 {
-	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
+	return (pud_flags(pud) & ~(_KERNPG_TABLE | _PAGE_USER)) != 0;
 }
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
 static inline int pgd_present(pgd_t pgd)
 {
-	return pgd_val(pgd) & _PAGE_PRESENT;
+	return pgd_flags(pgd) & _PAGE_PRESENT;
 }
 
 static inline unsigned long pgd_page_vaddr(pgd_t pgd)
@@ -600,7 +600,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
 
 static inline int pgd_bad(pgd_t pgd)
 {
-	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pgd_flags(pgd) & ~_PAGE_USER) != _KERNPG_TABLE;
 }
 
 static inline int pgd_none(pgd_t pgd)
-- 
cgit v1.2.3


From 26c8e3179933c5c9071b16db76ab6de58a787d06 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 5 Feb 2009 11:31:17 -0800
Subject: x86: make pgd/pud/pmd/pte_none consistent

The _none test is done differently for every level of the pagetable.
Standardize them by:

 1: Use the native_X_val to extract the raw entry, with no need to go
    via paravirt_ops, diff -r 1d0646d0d319 arch/x86/include/asm/pgtable.h, and
 2: Compare with 0 rather than using a boolean !, since they are actually values
    and not booleans.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index c811d76d6fd..a80a956ae65 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -465,7 +465,7 @@ static inline int pmd_none(pmd_t pmd)
 {
 	/* Only check low word on 32-bit platforms, since it might be
 	   out of sync with upper half. */
-	return !(unsigned long)native_pmd_val(pmd);
+	return (unsigned long)native_pmd_val(pmd) == 0;
 }
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
@@ -530,7 +530,7 @@ static inline unsigned long pages_to_mb(unsigned long npg)
 #if PAGETABLE_LEVELS > 2
 static inline int pud_none(pud_t pud)
 {
-	return pud_val(pud) == 0;
+	return native_pud_val(pud) == 0;
 }
 
 static inline int pud_present(pud_t pud)
@@ -605,7 +605,7 @@ static inline int pgd_bad(pgd_t pgd)
 
 static inline int pgd_none(pgd_t pgd)
 {
-	return !pgd_val(pgd);
+	return !native_pgd_val(pgd);
 }
 #endif	/* PAGETABLE_LEVELS > 3 */
 
-- 
cgit v1.2.3


From 976e8f677e42757e5586ea04a9ac8bb8ddaa037e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 13:29:44 -0800
Subject: x86: asm/io.h: unify virt_to_phys/phys_to_virt

Impact: unify identical code

asm/io_32.h and _64.h has functionally identical definitions for
virt_to_phys, phys_to_virt, page_to_phys, and the isa_* variants, so
just unify them.

The only slightly functional change is using phys_addr_t for the
physical address argument and return val.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/io.h    | 59 ++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/io_32.h | 57 ------------------------------------------
 arch/x86/include/asm/io_64.h | 37 ---------------------------
 3 files changed, 59 insertions(+), 94 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 1dbbdf4be9b..919e3b19f3c 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -5,6 +5,7 @@
 
 #include <linux/compiler.h>
 #include <asm-generic/int-ll64.h>
+#include <asm/page.h>
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
@@ -80,6 +81,64 @@ static inline void writeq(__u64 val, volatile void __iomem *addr)
 #define readq			readq
 #define writeq			writeq
 
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline phys_addr_t virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+
+static inline void *phys_to_virt(phys_addr_t address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+
 #ifdef CONFIG_X86_32
 # include "io_32.h"
 #else
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
index d8e242e1b39..2b687cb8609 100644
--- a/arch/x86/include/asm/io_32.h
+++ b/arch/x86/include/asm/io_32.h
@@ -53,47 +53,6 @@
  */
 #define xlate_dev_kmem_ptr(p)	p
 
-/**
- *	virt_to_phys	-	map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-/**
- *	phys_to_virt	-	map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
 /**
  * ioremap     -   map bus memory into CPU space
  * @offset:    bus address of the memory
@@ -123,22 +82,6 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
 
 extern void iounmap(volatile void __iomem *addr);
 
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
 static inline void
 memset_io(volatile void __iomem *addr, unsigned char val, int count)
 {
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
index 563c16270ba..e71b5550877 100644
--- a/arch/x86/include/asm/io_64.h
+++ b/arch/x86/include/asm/io_64.h
@@ -142,27 +142,6 @@ __OUTS(l)
 
 #include <linux/vmalloc.h>
 
-#ifndef __i386__
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-#endif
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
 #include <asm-generic/iomap.h>
 
 /*
@@ -187,22 +166,6 @@ extern void iounmap(volatile void __iomem *addr);
 
 extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
 void __memcpy_fromio(void *, unsigned long, unsigned);
 void __memcpy_toio(unsigned long, const void *, unsigned);
 
-- 
cgit v1.2.3


From 133822c5c038b265ddb6545cda3a4c88815c7d3d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 13:29:52 -0800
Subject: x86: asm/io.h: unify ioremap prototypes

Impact: unify identical code

asm/io_32.h and _64.h have identical prototypes for the ioremap family
of functions.  The 32-bit header had a more descriptive comment.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/io.h    | 31 +++++++++++++++++++++++++++++++
 arch/x86/include/asm/io_32.h | 29 -----------------------------
 arch/x86/include/asm/io_64.h | 22 ----------------------
 3 files changed, 31 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 919e3b19f3c..f150b1ecf92 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -138,6 +138,37 @@ static inline void *phys_to_virt(phys_addr_t address)
 #define virt_to_bus virt_to_phys
 #define bus_to_virt phys_to_virt
 
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
 
 #ifdef CONFIG_X86_32
 # include "io_32.h"
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
index 2b687cb8609..2fbe7dd26bb 100644
--- a/arch/x86/include/asm/io_32.h
+++ b/arch/x86/include/asm/io_32.h
@@ -53,35 +53,6 @@
  */
 #define xlate_dev_kmem_ptr(p)	p
 
-/**
- * ioremap     -   map bus memory into CPU space
- * @offset:    bus address of the memory
- * @size:      size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * If the area you are trying to map is a PCI BAR you should have a
- * look at pci_iomap().
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
 static inline void
 memset_io(volatile void __iomem *addr, unsigned char val, int count)
 {
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
index e71b5550877..0424c07246f 100644
--- a/arch/x86/include/asm/io_64.h
+++ b/arch/x86/include/asm/io_64.h
@@ -144,28 +144,6 @@ __OUTS(l)
 
 #include <asm-generic/iomap.h>
 
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
 void __memcpy_fromio(void *, unsigned long, unsigned);
 void __memcpy_toio(unsigned long, const void *, unsigned);
 
-- 
cgit v1.2.3


From 88800b2f2ffd3e436266e4dff9586d48b5b54500 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Fri, 6 Feb 2009 21:56:04 +0000
Subject: [ARM] orion5x: add rtc-m48t86 to orion5x_defconfig

The TS-7800 can have a M48T86 RTC onboard

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
 arch/arm/configs/orion5x_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index b2456ca544c..45dcd086fee 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1177,7 +1177,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T86=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
-- 
cgit v1.2.3


From c3dfdb0823213c81f60987c8a3770b89ea95cad6 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Fri, 6 Feb 2009 21:57:13 +0000
Subject: [ARM] orion5x: remove TS-78xx NOR support as it does not exist

The TS-7800's M25P40 is not available to the kernel, it's used
to load the initial bitstream onto the FPGA and so these hooks
point to nothing and need to be removed.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
 arch/arm/mach-orion5x/ts78xx-setup.c | 46 ------------------------------------
 1 file changed, 46 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 1368e9fd1a0..0cb34b9a6d8 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/m48t86.h>
@@ -40,12 +39,6 @@
 #define TS78XX_FPGA_REGS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
 #define TS78XX_FPGA_REGS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
 
-/*
- * 512kB NOR flash Device
- */
-#define TS78XX_NOR_BOOT_BASE		0xff800000
-#define TS78XX_NOR_BOOT_SIZE		SZ_512K
-
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -64,41 +57,6 @@ void __init ts78xx_map_io(void)
 	iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
 }
 
-/*****************************************************************************
- * 512kB NOR Boot Flash - the chip is a M25P40
- ****************************************************************************/
-static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
-	{
-		.name		= "ts-bootrom",
-		.offset		= 0,
-		/* only the first 256kB is used */
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
-	.width		= 1,
-	.parts		= ts78xx_nor_boot_flash_resources,
-	.nr_parts	= ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
-};
-
-static struct resource ts78xx_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= TS78XX_NOR_BOOT_BASE,
-	.end		= TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ts78xx_nor_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts78xx_nor_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ts78xx_nor_boot_flash_resource,
-};
-
 /*****************************************************************************
  * Ethernet
  ****************************************************************************/
@@ -257,10 +215,6 @@ static void __init ts78xx_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
-				   TS78XX_NOR_BOOT_SIZE);
-	platform_device_register(&ts78xx_nor_boot_flash);
-
 	if (!ts78xx_rtc_init())
 		printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
 }
-- 
cgit v1.2.3


From f54128609c4e7792fb52b03c3db0da78627ce607 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Fri, 6 Feb 2009 21:59:15 +0000
Subject: [ARM] orion5x: TS-78xx comment shifting

moved the MPP comments to the mpp area of the platform code

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
 arch/arm/mach-orion5x/ts78xx-setup.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 0cb34b9a6d8..b194956518a 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -181,6 +181,14 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
 	{ 17, MPP_UART },
 	{ 18, MPP_UART },
 	{ 19, MPP_UART },
+	/*
+	 * MPP[20] PCI Clock Out 1
+	 * MPP[21] PCI Clock Out 0
+	 * MPP[22] Unused
+	 * MPP[23] Unused
+	 * MPP[24] Unused
+	 * MPP[25] Unused
+	 */
 	{ -1 },
 };
 
@@ -195,15 +203,6 @@ static void __init ts78xx_init(void)
 
 	orion5x_mpp_conf(ts78xx_mpp_modes);
 
-	/*
-	 * MPP[20] PCI Clock Out 1
-	 * MPP[21] PCI Clock Out 0
-	 * MPP[22] Unused
-	 * MPP[23] Unused
-	 * MPP[24] Unused
-	 * MPP[25] Unused
-	 */
-
 	/*
 	 * Configure peripherals.
 	 */
-- 
cgit v1.2.3


From fb08b20fe7c8491a35a4369cce60fcb886d7609d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 14:05:28 -0800
Subject: x86: Fix compile error in arch/x86/kernel/early_printk.c

Fix compile problem:

  CC      arch/x86/kernel/early_printk.o
In file included from /home/jeremy/hg/xen/paravirt/linux/arch/x86/kernel/early_printk.c:17:
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pmd_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function '__pfn_to_section'
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function '__section_mem_map_addr'
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:516: warning: return makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pud_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:586: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:586: warning: return makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h: In function 'pgd_page':
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:625: warning: initialization makes pointer from integer without a cast
/home/jeremy/hg/xen/paravirt/linux/arch/x86/include/asm/pgtable.h:625: warning: return makes pointer from integer without a cast

This is a cycling dependency between asm/pgtable.h and linux/mmzone.h
when using CONFIG_SPARSEMEM.  Rather than hacking up the headers some
more, remove asm/pgtable.h, since early_printk.c doesn't actually need
it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/early_printk.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 504ad198e4a..6a36dd228b6 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -13,7 +13,6 @@
 #include <asm/setup.h>
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
-#include <asm/pgtable.h>
 #include <asm/fixmap.h>
 #include <linux/usb/ehci_def.h>
 
-- 
cgit v1.2.3


From 39008f959f4f3b60eecc5cec0ca077146c1f366b Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Fri, 6 Feb 2009 22:16:55 +0000
Subject: [ARM] orion5x: TS-78xx support for 'hotplug' of FPGA devices

the FPGA on the TS-7800 provides access to a number of devices
and so we have to be careful when reprogramming it.  As we
are effectively turning a bus off/on we have to inform the
kernel that it should stop using anything provided by the
FPGA (currently only the RTC however the NAND, LCD, etc is
to come) before it's reprogrammed.

Once reprogramed, we can tell the kernel to (re)enable things
by checking the FPGA ID against a lookup table for what a
particular FPGA bitstream can provide.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
 arch/arm/mach-orion5x/Kconfig        |   1 +
 arch/arm/mach-orion5x/ts78xx-fpga.h  |  27 ++++
 arch/arm/mach-orion5x/ts78xx-setup.c | 251 +++++++++++++++++++++++++++--------
 3 files changed, 224 insertions(+), 55 deletions(-)
 create mode 100644 arch/arm/mach-orion5x/ts78xx-fpga.h

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index f59a8d0e082..2c7035d8dcb 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -71,6 +71,7 @@ config MACH_WRT350N_V2
 
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
+	select PM
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-78xx platform.
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
new file mode 100644
index 00000000000..0b8e30faff1
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -0,0 +1,27 @@
+#define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
+
+/*
+ * get yer id's from http://ts78xx.digriz.org.uk/
+ * do *not* make up your own or 'borrow' any!
+ */
+enum fpga_ids {
+	/* Technologic Systems */
+	TS7800_REV_B = FPGAID(0x00b480, 0x03),
+};
+
+struct fpga_device {
+	unsigned		present:1;
+	unsigned		init:1;
+};
+
+struct fpga_devices {
+	/* Technologic Systems */
+	struct fpga_device 	ts_rtc;
+};
+
+struct ts78xx_fpga_data {
+	unsigned int		id;
+	int			state;
+
+	struct fpga_devices	supports;
+};
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b194956518a..baa25d0fd5c 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sysfs.h>
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
@@ -20,6 +21,7 @@
 #include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "ts78xx-fpga.h"
 
 /*****************************************************************************
  * TS-78xx Info
@@ -32,12 +34,11 @@
 #define TS78XX_FPGA_REGS_VIRT_BASE	0xff900000
 #define TS78XX_FPGA_REGS_SIZE		SZ_1M
 
-#define TS78XX_FPGA_REGS_SYSCON_ID	(TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
-#define TS78XX_FPGA_REGS_SYSCON_LCDI	(TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
-#define TS78XX_FPGA_REGS_SYSCON_LCDO	(TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
-
-#define TS78XX_FPGA_REGS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-#define TS78XX_FPGA_REGS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+static struct ts78xx_fpga_data ts78xx_fpga = {
+	.id		= 0,
+	.state		= 1,
+/*	.supports	= ... - populated by ts78xx_fpga_supports() */
+};
 
 /*****************************************************************************
  * I/O Address Mapping
@@ -64,32 +65,42 @@ static struct mv643xx_eth_platform_data ts78xx_eth_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ts78xx_sata_data = {
+	.n_ports	= 2,
+};
+
 /*****************************************************************************
  * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
  ****************************************************************************/
 #ifdef CONFIG_RTC_DRV_M48T86
-static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
+#define TS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
 {
-	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
-	return readb(TS78XX_FPGA_REGS_RTC_DATA);
+	writeb(addr, TS_RTC_CTRL);
+	return readb(TS_RTC_DATA);
 }
 
-static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
+static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
 {
-	writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
-	writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
+	writeb(addr, TS_RTC_CTRL);
+	writeb(value, TS_RTC_DATA);
 }
 
-static struct m48t86_ops ts78xx_rtc_ops = {
-	.readbyte	= ts78xx_rtc_readbyte,
-	.writebyte	= ts78xx_rtc_writebyte,
+static struct m48t86_ops ts78xx_ts_rtc_ops = {
+	.readbyte	= ts78xx_ts_rtc_readbyte,
+	.writebyte	= ts78xx_ts_rtc_writebyte,
 };
 
-static struct platform_device ts78xx_rtc_device = {
+static struct platform_device ts78xx_ts_rtc_device = {
 	.name		= "rtc-m48t86",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &ts78xx_rtc_ops,
+		.platform_data	= &ts78xx_ts_rtc_ops,
 	},
 	.num_resources	= 0,
 };
@@ -104,59 +115,185 @@ static struct platform_device ts78xx_rtc_device = {
  * TODO: track down a guinea pig without an RTC to see if we can work out a
  * 		better RTC detection routine
  */
-static int __init ts78xx_rtc_init(void)
+static int ts78xx_ts_rtc_load(void)
 {
 	unsigned char tmp_rtc0, tmp_rtc1;
 
-	tmp_rtc0 = ts78xx_rtc_readbyte(126);
-	tmp_rtc1 = ts78xx_rtc_readbyte(127);
-
-	ts78xx_rtc_writebyte(0x00, 126);
-	ts78xx_rtc_writebyte(0x55, 127);
-	if (ts78xx_rtc_readbyte(127) == 0x55) {
-		ts78xx_rtc_writebyte(0xaa, 127);
-		if (ts78xx_rtc_readbyte(127) == 0xaa
-				&& ts78xx_rtc_readbyte(126) == 0x00) {
-			ts78xx_rtc_writebyte(tmp_rtc0, 126);
-			ts78xx_rtc_writebyte(tmp_rtc1, 127);
-			platform_device_register(&ts78xx_rtc_device);
-			return 1;
+	tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
+	tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
+
+	ts78xx_ts_rtc_writebyte(0x00, 126);
+	ts78xx_ts_rtc_writebyte(0x55, 127);
+	if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
+		ts78xx_ts_rtc_writebyte(0xaa, 127);
+		if (ts78xx_ts_rtc_readbyte(127) == 0xaa
+				&& ts78xx_ts_rtc_readbyte(126) == 0x00) {
+			ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
+			ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
+			if (ts78xx_fpga.supports.ts_rtc.init == 0) {
+				ts78xx_fpga.supports.ts_rtc.init = 1;
+				platform_device_register(&ts78xx_ts_rtc_device);
+			} else
+				platform_device_add(&ts78xx_ts_rtc_device);
+			return 0;
 		}
 	}
 
-	return 0;
+	ts78xx_fpga.supports.ts_rtc.present = 0;
+	return -ENODEV;
 };
+
+static void ts78xx_ts_rtc_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rtc_device);
+}
 #else
-static int __init ts78xx_rtc_init(void)
+static int ts78xx_ts_rtc_load(void)
 {
 	return 0;
 }
+
+static void ts78xx_ts_rtc_unload(void)
+{
+}
 #endif
 
 /*****************************************************************************
- * SATA
+ * FPGA 'hotplug' support code
  ****************************************************************************/
-static struct mv_sata_platform_data ts78xx_sata_data = {
-	.n_ports	= 2,
+static void ts78xx_fpga_devices_zero_init(void)
+{
+	ts78xx_fpga.supports.ts_rtc.init = 0;
+}
+
+static void ts78xx_fpga_supports(void)
+{
+	/* TODO: put this 'table' into ts78xx-fpga.h */
+	switch (ts78xx_fpga.id) {
+	case TS7800_REV_B:
+		ts78xx_fpga.supports.ts_rtc.present = 1;
+		break;
+	default:
+		ts78xx_fpga.supports.ts_rtc.present = 0;
+	}
+}
+
+static int ts78xx_fpga_load_devices(void)
+{
+	int tmp, ret = 0;
+
+	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
+		tmp = ts78xx_ts_rtc_load();
+		if (tmp)
+			printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+		ret |= tmp;
+	}
+
+	return ret;
+}
+
+static int ts78xx_fpga_unload_devices(void)
+{
+	int ret = 0;
+
+	if (ts78xx_fpga.supports.ts_rtc.present == 1)
+		ts78xx_ts_rtc_unload();
+
+	return ret;
+}
+
+static int ts78xx_fpga_load(void)
+{
+	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+	printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+			(ts78xx_fpga.id >> 8) & 0xffffff,
+			ts78xx_fpga.id & 0xff);
+
+	ts78xx_fpga_supports();
+
+	if (ts78xx_fpga_load_devices()) {
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	return 0;
 };
 
-/*****************************************************************************
- * print some information regarding the board
- ****************************************************************************/
-static void __init ts78xx_print_board_id(void)
-{
-	unsigned int board_info;
-
-	board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
-	printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
-				board_info & 0xff,
-				(board_info >> 8) & 0xffffff);
-	board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
-	printk("JP1=%d, JP2=%d\n",
-				(board_info >> 30) & 0x1,
-				(board_info >> 31) & 0x1);
+static int ts78xx_fpga_unload(void)
+{
+	unsigned int fpga_id;
+
+	fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+	/*
+	 * There does not seem to be a feasible way to block access to the GPIO
+	 * pins from userspace (/dev/mem).  This if clause should hopefully warn
+	 * those foolish enough not to follow 'policy' :)
+	 *
+	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
+	 */
+	if (ts78xx_fpga.id != fpga_id) {
+		printk(KERN_ERR	"TS-78xx FPGA: magic/rev mismatch\n"
+			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
+			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
+			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	if (ts78xx_fpga_unload_devices()) {
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	return 0;
 };
 
+static ssize_t ts78xx_fpga_show(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	if (ts78xx_fpga.state < 0)
+		return sprintf(buf, "borked\n");
+
+	return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
+}
+
+static ssize_t ts78xx_fpga_store(struct kobject *kobj,
+			struct kobj_attribute *attr, const char *buf, size_t n)
+{
+	int value, ret;
+
+	if (ts78xx_fpga.state < 0) {
+		printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+		return -EBUSY;
+	}
+
+	if (strncmp(buf, "online", sizeof("online") - 1) == 0)
+		value = 1;
+	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+		value = 0;
+	else {
+		printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+		return -EINVAL;
+	}
+
+	if (ts78xx_fpga.state == value)
+		return n;
+
+	ret = (ts78xx_fpga.state == 0)
+		? ts78xx_fpga_load()
+		: ts78xx_fpga_unload();
+
+	if (!(ret < 0))
+		ts78xx_fpga.state = value;
+
+	return n;
+}
+
+static struct kobj_attribute ts78xx_fpga_attr =
+	__ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
+
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
@@ -194,13 +331,13 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
 
 static void __init ts78xx_init(void)
 {
+	int ret;
+
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
 	orion5x_init();
 
-	ts78xx_print_board_id();
-
 	orion5x_mpp_conf(ts78xx_mpp_modes);
 
 	/*
@@ -214,8 +351,12 @@ static void __init ts78xx_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	if (!ts78xx_rtc_init())
-		printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+	/* FPGA init */
+	ts78xx_fpga_devices_zero_init();
+	ret = ts78xx_fpga_load();
+	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
+	if (ret)
+		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
 }
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
-- 
cgit v1.2.3


From 897dcded6fb6565f4d1c22a55d21f135403db132 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 16:35:03 +0000
Subject: [ARM] omap: provide a NULL clock operations structure

... and use it for clocks which are ALWAYS_ENABLED.  These clocks
use a non-NULL enable_reg pointer for other purposes (such as
selecting clock rates.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             |  3 --
 arch/arm/mach-omap1/clock.h             | 78 ++++++++++++++----------------
 arch/arm/mach-omap2/clock.c             |  4 +-
 arch/arm/mach-omap2/clock24xx.h         | 31 ++++++++----
 arch/arm/mach-omap2/clock34xx.h         | 85 ++++++++++++++++++++-------------
 arch/arm/plat-omap/clock.c              | 23 ++++++++-
 arch/arm/plat-omap/include/mach/clock.h |  4 +-
 7 files changed, 135 insertions(+), 93 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 25ef04da6b0..ff408105ffb 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -515,9 +515,6 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	__u16 regval16;
 	__u32 regval32;
 
-	if (clk->flags & ALWAYS_ENABLED)
-		return 0;
-
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 5b93a2a897a..8673832d829 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -144,18 +144,18 @@ static struct mpu_rate rate_table[] = {
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310,
 };
 
 static struct clk ck_dpll1 = {
 	.name		= "ck_dpll1",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | RATE_PROPAGATES,
 };
 
 static struct arm_idlect1_clk ck_dpll1out = {
@@ -186,11 +186,10 @@ static struct clk sossi_ck = {
 
 static struct clk arm_ck = {
 	.name		= "arm_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
-			  ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 };
@@ -265,9 +264,9 @@ static struct arm_idlect1_clk armwdt_ck = {
 
 static struct clk arminth_ck16xx = {
 	.name		= "arminth_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
@@ -290,10 +289,10 @@ static struct clk dsp_ck = {
 
 static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | ALWAYS_ENABLED,
+			  RATE_CKCTL,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 };
@@ -337,12 +336,12 @@ static struct clk dsptim_ck = {
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
 		.name		= "tc_ck",
-		.ops		= &clkops_generic,
+		.ops		= &clkops_null,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
 				  RATE_CKCTL | RATE_PROPAGATES |
-				  ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
+				  CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
 	},
@@ -351,10 +350,9 @@ static struct arm_idlect1_clk tc_ck = {
 
 static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.recalc		= &followparent_recalc,
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
@@ -365,10 +363,9 @@ static struct clk arminth_ck1510 = {
 static struct clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "tipb_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.recalc		= &followparent_recalc,
 };
 
@@ -406,18 +403,18 @@ static struct clk tc2_ck = {
 static struct clk dma_ck = {
 	/* No-idle controlled by "tc_ck" */
 	.name		= "dma_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dma_lcdfree_ck = {
 	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 };
 
@@ -451,17 +448,17 @@ static struct arm_idlect1_clk lb_ck = {
 
 static struct clk rhea1_ck = {
 	.name		= "rhea1_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk rhea2_ck = {
 	.name		= "rhea2_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 };
 
@@ -493,13 +490,12 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 
 static struct clk uart1_1510 = {
 	.name		= "uart1_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
-			  CLOCK_NO_IDLE_PARENT,
+			  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -523,13 +519,13 @@ static struct uart_clk uart1_16xx = {
 
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
-			  ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
+			  CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -538,13 +534,12 @@ static struct clk uart2_ck = {
 
 static struct clk uart3_1510 = {
 	.name		= "uart3_ck",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ENABLE_REG_32BIT | ALWAYS_ENABLED |
-			  CLOCK_NO_IDLE_PARENT,
+			  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -680,9 +675,9 @@ static struct clk mmc2_ck = {
 
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
+			  CLOCK_IN_OMAP310,
 	.parent		= &arm_ck, /* Is smarter alias for */
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
@@ -694,9 +689,9 @@ remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
-	.ops		= &clkops_generic,
+	.ops		= &clkops_null,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_NO_IDLE_PARENT | ALWAYS_ENABLED,
+			  CLOCK_NO_IDLE_PARENT,
 	.parent		= &armxor_ck.clk,
 	.recalc		= &followparent_recalc,
 };
@@ -704,9 +699,8 @@ static struct clk i2c_fck = {
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
 	.id		= 1,
-	.ops		= &clkops_generic,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
-			  ALWAYS_ENABLED,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT,
 	.parent		= &armper_ck.clk,
 	.recalc		= &followparent_recalc,
 };
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d3213f565d5..fa99c0b71d3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -271,7 +271,7 @@ int _omap2_clk_enable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
+	if (clk->flags & PARENT_CONTROLS_CLOCK)
 		return 0;
 
 	if (clk->ops && clk->ops->enable)
@@ -301,7 +301,7 @@ void _omap2_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
+	if (clk->flags & PARENT_CONTROLS_CLOCK)
 		return;
 
 	if (clk->ops && clk->ops->disable) {
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 2aa0b5e6560..d4869377307 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -619,9 +619,10 @@ static struct prcm_config rate_table[] = {
 /* Base external input clocks */
 static struct clk func_32k_ck = {
 	.name		= "func_32k_ck",
+	.ops		= &clkops_null,
 	.rate		= 32000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+				RATE_FIXED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &propagate_rate,
 };
@@ -639,18 +640,20 @@ static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 /* Without modem likely 12MHz, with modem likely 13MHz */
 static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
 	.name		= "sys_ck",		/* ~ ref_clk also */
+	.ops		= &clkops_null,
 	.parent		= &osc_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_sys_clk_recalc,
 };
 
 static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.name		= "alt_ck",
+	.ops		= &clkops_null,
 	.rate		= 54000000,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+				RATE_FIXED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &propagate_rate,
 };
@@ -679,10 +682,11 @@ static struct dpll_data dpll_dd = {
  */
 static struct clk dpll_ck = {
 	.name		= "dpll_ck",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,		/* Can be func_32k also */
 	.dpll_data	= &dpll_dd,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | ALWAYS_ENABLED,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
 	.set_rate	= &omap2_reprogram_dpllcore,
@@ -751,9 +755,10 @@ static struct clk func_54m_ck = {
 
 static struct clk core_ck = {
 	.name		= "core_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll_ck,		/* can also be 32k */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -837,6 +842,7 @@ static struct clk func_12m_ck = {
 /* Secure timer, only available in secure mode */
 static struct clk wdt1_osc_ck = {
 	.name		= "ck_wdt1_osc",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &osc_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.recalc		= &followparent_recalc,
@@ -996,9 +1002,10 @@ static const struct clksel mpu_clksel[] = {
 
 static struct clk mpu_ck = {	/* Control cpu */
 	.name		= "mpu_ck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP |
+				DELAYED_APP |
 				CONFIG_PARTICIPANT | RATE_PROPAGATES,
 	.clkdm_name	= "mpu_clkdm",
 	.init		= &omap2_init_clksel_parent,
@@ -1168,9 +1175,10 @@ static const struct clksel core_l3_clksel[] = {
 
 static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
 	.name		= "core_l3_ck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP |
+				DELAYED_APP |
 				CONFIG_PARTICIPANT | RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
@@ -1231,9 +1239,10 @@ static const struct clksel l4_clksel[] = {
 
 static struct clk l4_ck = {		/* used both as an ick and fck */
 	.name		= "l4_ck",
+	.ops		= &clkops_null,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+				DELAYED_APP | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
@@ -2359,6 +2368,7 @@ static struct clk i2chs1_fck = {
 
 static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ENABLE_ON_INIT,
@@ -2368,6 +2378,7 @@ static struct clk gpmc_fck = {
 
 static struct clk sdma_fck = {
 	.name		= "sdma_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2376,6 +2387,7 @@ static struct clk sdma_fck = {
 
 static struct clk sdma_ick = {
 	.name		= "sdma_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2621,8 +2633,9 @@ static struct clk mmchsdb2_fck = {
  */
 static struct clk virt_prcm_set = {
 	.name		= "virt_prcm_set",
+	.ops		= &clkops_null,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | DELAYED_APP,
+				DELAYED_APP,
 	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
 	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
 	.set_rate	= &omap2_select_table_rate,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 8b188fb9bea..b56fd289762 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -55,66 +55,66 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk);
 /* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
 static struct clk omap_32k_fck = {
 	.name		= "omap_32k_fck",
+	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk secure_32k_fck = {
 	.name		= "secure_32k_fck",
+	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 /* Virtual source clocks for osc_sys_ck */
 static struct clk virt_12m_ck = {
 	.name		= "virt_12m_ck",
+	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_13m_ck = {
 	.name		= "virt_13m_ck",
+	.ops		= &clkops_null,
 	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_16_8m_ck = {
 	.name		= "virt_16_8m_ck",
+	.ops		= &clkops_null,
 	.rate		= 16800000,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_19_2m_ck = {
 	.name		= "virt_19_2m_ck",
+	.ops		= &clkops_null,
 	.rate		= 19200000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_26m_ck = {
 	.name		= "virt_26m_ck",
+	.ops		= &clkops_null,
 	.rate		= 26000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_38_4m_ck = {
 	.name		= "virt_38_4m_ck",
+	.ops		= &clkops_null,
 	.rate		= 38400000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
@@ -162,13 +162,13 @@ static const struct clksel osc_sys_clksel[] = {
 /* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
 static struct clk osc_sys_ck = {
 	.name		= "osc_sys_ck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP3430_PRM_CLKSEL,
 	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
 	.clksel		= osc_sys_clksel,
 	/* REVISIT: deal with autoextclkmode? */
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
-				ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -187,25 +187,28 @@ static const struct clksel sys_clksel[] = {
 /* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
 static struct clk sys_ck = {
 	.name		= "sys_ck",
+	.ops		= &clkops_null,
 	.parent		= &osc_sys_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
 	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
 	.clksel		= sys_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk sys_altclk = {
 	.name		= "sys_altclk",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
 /* Optional external clock input for some McBSPs */
 static struct clk mcbsp_clks = {
 	.name		= "mcbsp_clks",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &propagate_rate,
 };
 
@@ -278,9 +281,10 @@ static struct dpll_data dpll1_dd = {
 
 static struct clk dpll1_ck = {
 	.name		= "dpll1_ck",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll1_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -398,9 +402,10 @@ static struct dpll_data dpll3_dd = {
 
 static struct clk dpll3_ck = {
 	.name		= "dpll3_ck",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll3_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -2266,9 +2271,10 @@ static struct clk gpt1_fck = {
 
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2295,8 +2301,9 @@ static struct clk wdt2_fck = {
 
 static struct clk wkup_l4_ick = {
 	.name		= "wkup_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &sys_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2514,9 +2521,10 @@ static struct clk gpt9_fck = {
 
 static struct clk per_32k_alwon_fck = {
 	.name		= "per_32k_alwon_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "per_clkdm",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2859,11 +2867,12 @@ static const struct clksel emu_src_clksel[] = {
  */
 static struct clk emu_src_ck = {
 	.name		= "emu_src_ck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2883,11 +2892,12 @@ static const struct clksel pclk_emu_clksel[] = {
 
 static struct clk pclk_fck = {
 	.name		= "pclk_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
 	.clksel		= pclk_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2906,11 +2916,12 @@ static const struct clksel pclkx2_emu_clksel[] = {
 
 static struct clk pclkx2_fck = {
 	.name		= "pclkx2_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
 	.clksel		= pclkx2_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2922,22 +2933,24 @@ static const struct clksel atclk_emu_clksel[] = {
 
 static struct clk atclk_fck = {
 	.name		= "atclk_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
 	.clksel		= atclk_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk traceclk_src_fck = {
 	.name		= "traceclk_src_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2956,11 +2969,12 @@ static const struct clksel traceclk_clksel[] = {
 
 static struct clk traceclk_fck = {
 	.name		= "traceclk_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
 	.clksel		= traceclk_clksel,
-	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2989,6 +3003,7 @@ static struct clk sr2_fck = {
 
 static struct clk sr_l4_ick = {
 	.name		= "sr_l4_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &l4_ick,
 	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -3000,15 +3015,17 @@ static struct clk sr_l4_ick = {
 /* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
+	.ops		= &clkops_null,
 	.parent		= &secure_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk wdt1_fck = {
 	.name		= "wdt1_fck",
+	.ops		= &clkops_null,
 	.parent		= &secure_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index be6aab9c683..529c4a9f012 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -358,6 +358,23 @@ void clk_enable_init_clocks(void)
 }
 EXPORT_SYMBOL(clk_enable_init_clocks);
 
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+	return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+	.enable		= clkll_enable_null,
+	.disable	= clkll_disable_null,
+};
+
 #ifdef CONFIG_CPU_FREQ
 void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
@@ -383,8 +400,10 @@ static int __init clk_disable_unused(void)
 	unsigned long flags;
 
 	list_for_each_entry(ck, &clocks, node) {
-		if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
-			ck->enable_reg == 0)
+		if (ck->ops == &clkops_null)
+			continue;
+
+		if (ck->usecount > 0 || ck->enable_reg == 0)
 			continue;
 
 		spin_lock_irqsave(&clockfw_lock, flags);
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 4fe5084e8cc..c1e484463ed 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -125,11 +125,13 @@ extern void clk_deny_idle(struct clk *clk);
 extern int clk_get_usecount(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 
+extern const struct clkops clkops_null;
+
 /* Clock flags */
 #define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
 #define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
 #define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+/* bits 3-4 are free */
 #define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
 #define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
 #define CLOCK_IDLE_CONTROL	(1 << 7)
-- 
cgit v1.2.3


From 57137181e3136d4c7b20b4b95b9817efd38f8f07 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 16:48:35 +0000
Subject: [ARM] omap: kill PARENT_CONTROLS_CLOCK

PARENT_CONTROLS_CLOCK just makes enable/disable no-op, and is
functionally an alias for ALWAYS_ENABLED.  This can be handled
in the same way, using clkops_null.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c             |   6 -
 arch/arm/mach-omap2/clock24xx.h         |  22 ++--
 arch/arm/mach-omap2/clock34xx.h         | 196 ++++++++++++++++----------------
 arch/arm/plat-omap/include/mach/clock.h |   1 -
 4 files changed, 114 insertions(+), 111 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index fa99c0b71d3..21fbe29810a 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -271,9 +271,6 @@ int _omap2_clk_enable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & PARENT_CONTROLS_CLOCK)
-		return 0;
-
 	if (clk->ops && clk->ops->enable)
 		return clk->ops->enable(clk);
 
@@ -301,9 +298,6 @@ void _omap2_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & PARENT_CONTROLS_CLOCK)
-		return;
-
 	if (clk->ops && clk->ops->disable) {
 		clk->ops->disable(clk);
 		return;
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index d4869377307..adc00e1064a 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -742,9 +742,10 @@ static const struct clksel func_54m_clksel[] = {
 
 static struct clk func_54m_ck = {
 	.name		= "func_54m_ck",
+	.ops		= &clkops_null,
 	.parent		= &apll54_ck,	/* can also be alt_clk */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -783,9 +784,10 @@ static const struct clksel func_96m_clksel[] = {
 /* The parent of this clock is not selectable on 2420. */
 static struct clk func_96m_ck = {
 	.name		= "func_96m_ck",
+	.ops		= &clkops_null,
 	.parent		= &apll96_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -816,9 +818,10 @@ static const struct clksel func_48m_clksel[] = {
 
 static struct clk func_48m_ck = {
 	.name		= "func_48m_ck",
+	.ops		= &clkops_null,
 	.parent		= &apll96_ck,	 /* 96M or Alt */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -831,10 +834,11 @@ static struct clk func_48m_ck = {
 
 static struct clk func_12m_ck = {
 	.name		= "func_12m_ck",
+	.ops		= &clkops_null,
 	.parent		= &func_48m_ck,
 	.fixed_div	= 4,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+				RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -917,9 +921,9 @@ static const struct clksel sys_clkout_clksel[] = {
 
 static struct clk sys_clkout = {
 	.name		= "sys_clkout",
+	.ops		= &clkops_null,
 	.parent		= &sys_clkout_src,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
@@ -954,8 +958,9 @@ static const struct clksel sys_clkout2_clksel[] = {
 /* In 2430, new in 2420 ES2 */
 static struct clk sys_clkout2 = {
 	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
 	.parent		= &sys_clkout2_src,
-	.flags		= CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
@@ -1076,9 +1081,10 @@ static const struct clksel dsp_irate_ick_clksel[] = {
 /* This clock does not exist as such in the TRM. */
 static struct clk dsp_irate_ick = {
 	.name		= "dsp_irate_ick",
+	.ops		= &clkops_null,
 	.parent		= &dsp_fck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
-				CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+				CONFIG_PARTICIPANT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
 	.clksel		= dsp_irate_ick_clksel,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index b56fd289762..203e2bd3b3b 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -295,9 +295,9 @@ static struct clk dpll1_ck = {
  */
 static struct clk dpll1_x2_ck = {
 	.name		= "dpll1_x2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll1_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -313,13 +313,13 @@ static const struct clksel div16_dpll1_x2m2_clksel[] = {
  */
 static struct clk dpll1_x2m2_ck = {
 	.name		= "dpll1_x2m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll1_x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll1_x2m2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -368,14 +368,14 @@ static const struct clksel div16_dpll2_m2x2_clksel[] = {
  */
 static struct clk dpll2_m2_ck = {
 	.name		= "dpll2_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
 					  OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll2_m2x2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -416,9 +416,9 @@ static struct clk dpll3_ck = {
  */
 static struct clk dpll3_x2_ck = {
 	.name		= "dpll3_x2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -469,13 +469,13 @@ static const struct clksel div31_dpll3m2_clksel[] = {
  */
 static struct clk dpll3_m2_ck = {
 	.name		= "dpll3_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div31_dpll3m2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -487,12 +487,12 @@ static const struct clksel core_ck_clksel[] = {
 
 static struct clk core_ck = {
 	.name		= "core_ck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= core_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -504,12 +504,12 @@ static const struct clksel dpll3_m2x2_ck_clksel[] = {
 
 static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -522,13 +522,13 @@ static const struct clksel div16_dpll3_clksel[] = {
 /* This virtual clock is the source for dpll3_m3x2_ck */
 static struct clk dpll3_m3_ck = {
 	.name		= "dpll3_m3_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
 	.clksel		= div16_dpll3_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -550,13 +550,13 @@ static const struct clksel emu_core_alwon_ck_clksel[] = {
 
 static struct clk emu_core_alwon_ck = {
 	.name		= "emu_core_alwon_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -599,9 +599,9 @@ static struct clk dpll4_ck = {
  */
 static struct clk dpll4_x2_ck = {
 	.name		= "dpll4_x2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -613,13 +613,13 @@ static const struct clksel div16_dpll4_clksel[] = {
 /* This virtual clock is the source for dpll4_m2x2_ck */
 static struct clk dpll4_m2_ck = {
 	.name		= "dpll4_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
 	.clksel_mask	= OMAP3430_DIV_96M_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -641,21 +641,21 @@ static const struct clksel omap_96m_alwon_fck_clksel[] = {
 
 static struct clk omap_96m_alwon_fck = {
 	.name		= "omap_96m_alwon_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= omap_96m_alwon_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				 PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk omap_96m_fck = {
 	.name		= "omap_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -667,26 +667,26 @@ static const struct clksel cm_96m_fck_clksel[] = {
 
 static struct clk cm_96m_fck = {
 	.name		= "cm_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_m2x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cm_96m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 /* This virtual clock is the source for dpll4_m3x2_ck */
 static struct clk dpll4_m3_ck = {
 	.name		= "dpll4_m3_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -709,13 +709,13 @@ static const struct clksel virt_omap_54m_fck_clksel[] = {
 
 static struct clk virt_omap_54m_fck = {
 	.name		= "virt_omap_54m_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_m3x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= virt_omap_54m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -737,12 +737,12 @@ static const struct clksel omap_54m_clksel[] = {
 
 static struct clk omap_54m_fck = {
 	.name		= "omap_54m_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_54M,
 	.clksel		= omap_54m_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -764,34 +764,34 @@ static const struct clksel omap_48m_clksel[] = {
 
 static struct clk omap_48m_fck = {
 	.name		= "omap_48m_fck",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_48M,
 	.clksel		= omap_48m_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk omap_12m_fck = {
 	.name		= "omap_12m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.fixed_div	= 4,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
 /* This virstual clock is the source for dpll4_m4x2_ck */
 static struct clk dpll4_m4_ck = {
 	.name		= "dpll4_m4_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -808,13 +808,13 @@ static struct clk dpll4_m4x2_ck = {
 /* This virtual clock is the source for dpll4_m5x2_ck */
 static struct clk dpll4_m5_ck = {
 	.name		= "dpll4_m5_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -831,13 +831,13 @@ static struct clk dpll4_m5x2_ck = {
 /* This virtual clock is the source for dpll4_m6x2_ck */
 static struct clk dpll4_m6_ck = {
 	.name		= "dpll4_m6_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -854,9 +854,9 @@ static struct clk dpll4_m6x2_ck = {
 
 static struct clk emu_per_alwon_ck = {
 	.name		= "emu_per_alwon_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll4_m6x2_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -900,13 +900,13 @@ static const struct clksel div16_dpll5_clksel[] = {
 
 static struct clk dpll5_m2_ck = {
 	.name		= "dpll5_m2_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll5_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -918,13 +918,13 @@ static const struct clksel omap_120m_fck_clksel[] = {
 
 static struct clk omap_120m_fck = {
 	.name		= "omap_120m_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
 	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
 	.clksel		= omap_120m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -986,11 +986,12 @@ static const struct clksel sys_clkout2_clksel[] = {
 
 static struct clk sys_clkout2 = {
 	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
 	.clksel		= sys_clkout2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -998,9 +999,9 @@ static struct clk sys_clkout2 = {
 
 static struct clk corex2_fck = {
 	.name		= "corex2_fck",
+	.ops		= &clkops_null,
 	.parent		= &dpll3_m2x2_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1017,13 +1018,13 @@ static const struct clksel div2_core_clksel[] = {
  */
 static struct clk dpll1_fck = {
 	.name		= "dpll1_fck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1041,13 +1042,13 @@ static const struct clksel mpu_clksel[] = {
 
 static struct clk mpu_ck = {
 	.name		= "mpu_ck",
+	.ops		= &clkops_null,
 	.parent		= &dpll1_x2m2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= mpu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1066,13 +1067,13 @@ static const struct clksel arm_fck_clksel[] = {
 
 static struct clk arm_fck = {
 	.name		= "arm_fck",
+	.ops		= &clkops_null,
 	.parent		= &mpu_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1084,21 +1085,21 @@ static struct clk arm_fck = {
  */
 static struct clk emu_mpu_alwon_ck = {
 	.name		= "emu_mpu_alwon_ck",
+	.ops		= &clkops_null,
 	.parent		= &mpu_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dpll2_fck = {
 	.name		= "dpll2_fck",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1134,13 +1135,13 @@ static struct clk iva2_ck = {
 
 static struct clk l3_ick = {
 	.name		= "l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &core_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1152,13 +1153,13 @@ static const struct clksel div2_l3_clksel[] = {
 
 static struct clk l4_ick = {
 	.name		= "l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
 	.clksel		= div2_l3_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 
@@ -1171,12 +1172,13 @@ static const struct clksel div2_l4_clksel[] = {
 
 static struct clk rm_ick = {
 	.name		= "rm_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
 	.clksel		= div2_l4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1202,21 +1204,22 @@ static struct clk gfx_l3_ck = {
 
 static struct clk gfx_l3_fck = {
 	.name		= "gfx_l3_fck",
+	.ops		= &clkops_null,
 	.parent		= &gfx_l3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
 	.clksel		= gfx_l3_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk gfx_l3_ick = {
 	.name		= "gfx_l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &gfx_l3_ck,
-	.flags		= CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1365,9 +1368,9 @@ static struct clk usbtll_fck = {
 
 static struct clk core_96m_fck = {
 	.name		= "core_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_96m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1499,9 +1502,9 @@ static struct clk mcbsp1_fck = {
 
 static struct clk core_48m_fck = {
 	.name		= "core_48m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1577,9 +1580,9 @@ static struct clk fshostusb_fck = {
 
 static struct clk core_12m_fck = {
 	.name		= "core_12m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_12m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1625,9 +1628,10 @@ static struct clk ssi_ssr_fck = {
 
 static struct clk ssi_sst_fck = {
 	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
 	.parent		= &ssi_ssr_fck,
 	.fixed_div	= 2,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
@@ -1641,10 +1645,10 @@ static struct clk ssi_sst_fck = {
  */
 static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1671,9 +1675,9 @@ static struct clk sdrc_ick = {
 
 static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
+	.ops		= &clkops_null,
 	.parent		= &core_l3_ick,
-	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
-				ENABLE_ON_INIT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT, /* huh? */
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1682,9 +1686,9 @@ static struct clk gpmc_fck = {
 
 static struct clk security_l3_ick = {
 	.name		= "security_l3_ick",
+	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1701,10 +1705,10 @@ static struct clk pka_ick = {
 
 static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1984,9 +1988,9 @@ static struct clk omapctrl_ick = {
 
 static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2028,9 +2032,9 @@ static struct clk usb_l4_ick = {
 
 static struct clk security_l4_ick2 = {
 	.name		= "security_l4_ick2",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2387,20 +2391,20 @@ static struct clk gpt1_ick = {
 
 static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
+	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2590,9 +2594,9 @@ static struct clk wdt3_fck = {
 
 static struct clk per_l4_ick = {
 	.name		= "per_l4_ick",
+	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index c1e484463ed..40a2ac353de 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -148,7 +148,6 @@ extern const struct clkops clkops_null;
 #define CLOCK_IN_OMAP242X	(1 << 25)
 #define CLOCK_IN_OMAP243X	(1 << 26)
 #define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK	(1 << 28)
 #define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
 #define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
 
-- 
cgit v1.2.3


From b36ee724208358bd892ad279efce629740517149 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 17:59:52 +0000
Subject: [ARM] omap: add default .ops to all remaining OMAP2 clocks

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c     |  35 ++++++-----
 arch/arm/mach-omap2/clock.h     |   2 +
 arch/arm/mach-omap2/clock24xx.h | 115 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/clock34xx.h | 133 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 271 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 21fbe29810a..8c09711d2ea 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -264,16 +264,10 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	omap2_wait_clock_ready(st_reg, bit, clk->name);
 }
 
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-int _omap2_clk_enable(struct clk *clk)
+static int omap2_dflt_clk_enable_wait(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->ops && clk->ops->enable)
-		return clk->ops->enable(clk);
-
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
@@ -293,16 +287,10 @@ int _omap2_clk_enable(struct clk *clk)
 	return 0;
 }
 
-/* Disables clock without considering parent dependencies or use count */
-void _omap2_clk_disable(struct clk *clk)
+static void omap2_dflt_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->ops && clk->ops->disable) {
-		clk->ops->disable(clk);
-		return;
-	}
-
 	if (clk->enable_reg == NULL) {
 		/*
 		 * 'Independent' here refers to a clock which is not
@@ -322,6 +310,25 @@ void _omap2_clk_disable(struct clk *clk)
 	wmb();
 }
 
+const struct clkops clkops_omap2_dflt_wait = {
+	.enable		= omap2_dflt_clk_enable_wait,
+	.disable	= omap2_dflt_clk_disable,
+};
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int _omap2_clk_enable(struct clk *clk)
+{
+	return clk->ops->enable(clk);
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void _omap2_clk_disable(struct clk *clk)
+{
+	clk->ops->disable(clk);
+}
+
 void omap2_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1fb330e0847..d4bdb59b300 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -51,6 +51,8 @@ u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
 
+extern const struct clkops clkops_omap2_dflt_wait;
+
 extern u8 cpu_mask;
 
 /* clksel_rate data common to 24xx/343x */
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index adc00e1064a..b59bf902ce7 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -890,6 +890,7 @@ static const struct clksel common_clkout_src_clksel[] = {
 
 static struct clk sys_clkout_src = {
 	.name		= "sys_clkout_src",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES,
@@ -936,6 +937,7 @@ static struct clk sys_clkout = {
 /* In 2430, new in 2420 ES2 */
 static struct clk sys_clkout2_src = {
 	.name		= "sys_clkout2_src",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
@@ -972,6 +974,7 @@ static struct clk sys_clkout2 = {
 
 static struct clk emul_ck = {
 	.name		= "emul_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "wkup_clkdm",
@@ -1051,6 +1054,7 @@ static const struct clksel dsp_fck_clksel[] = {
 
 static struct clk dsp_fck = {
 	.name		= "dsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
 				CONFIG_PARTICIPANT | RATE_PROPAGATES,
@@ -1096,6 +1100,7 @@ static struct clk dsp_irate_ick = {
 /* 2420 only */
 static struct clk dsp_ick = {
 	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dsp_irate_ick,
 	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
@@ -1105,6 +1110,7 @@ static struct clk dsp_ick = {
 /* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
 static struct clk iva2_1_ick = {
 	.name		= "iva2_1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dsp_irate_ick,
 	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
@@ -1118,6 +1124,7 @@ static struct clk iva2_1_ick = {
  */
 static struct clk iva1_ifck = {
 	.name		= "iva1_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
 				RATE_PROPAGATES | DELAYED_APP,
@@ -1135,6 +1142,7 @@ static struct clk iva1_ifck = {
 /* IVA1 mpu/int/i/f clocks are /2 of parent */
 static struct clk iva1_mpu_int_ifck = {
 	.name		= "iva1_mpu_int_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &iva1_ifck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "iva1_clkdm",
@@ -1211,6 +1219,7 @@ static const struct clksel usb_l4_ick_clksel[] = {
 /* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
 static struct clk usb_l4_ick = {	/* FS-USB interface clock */
 	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP | CONFIG_PARTICIPANT,
@@ -1284,6 +1293,7 @@ static const struct clksel ssi_ssr_sst_fck_clksel[] = {
 
 static struct clk ssi_ssr_sst_fck = {
 	.name		= "ssi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
@@ -1320,6 +1330,7 @@ static const struct clksel gfx_fck_clksel[] = {
 
 static struct clk gfx_3d_fck = {
 	.name		= "gfx_3d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
@@ -1335,6 +1346,7 @@ static struct clk gfx_3d_fck = {
 
 static struct clk gfx_2d_fck = {
 	.name		= "gfx_2d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
@@ -1350,6 +1362,7 @@ static struct clk gfx_2d_fck = {
 
 static struct clk gfx_ick = {
 	.name		= "gfx_ick",		/* From l3 */
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
@@ -1380,6 +1393,7 @@ static const struct clksel mdm_ick_clksel[] = {
 
 static struct clk mdm_ick = {		/* used both as a ick and fck */
 	.name		= "mdm_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
 	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "mdm_clkdm",
@@ -1395,6 +1409,7 @@ static struct clk mdm_ick = {		/* used both as a ick and fck */
 
 static struct clk mdm_osc_ck = {
 	.name		= "mdm_osc_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &osc_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "mdm_clkdm",
@@ -1440,6 +1455,7 @@ static const struct clksel dss1_fck_clksel[] = {
 
 static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,	/* really both l3 and l4 */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
@@ -1450,6 +1466,7 @@ static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 
 static struct clk dss1_fck = {
 	.name		= "dss1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,		/* Core or sys */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
@@ -1483,6 +1500,7 @@ static const struct clksel dss2_fck_clksel[] = {
 
 static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.name		= "dss2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
@@ -1498,6 +1516,7 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 
 static struct clk dss_54m_fck = {	/* Alt clk used in power management */
 	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
@@ -1526,6 +1545,7 @@ static const struct clksel omap24xx_gpt_clksel[] = {
 
 static struct clk gpt1_ick = {
 	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1536,6 +1556,7 @@ static struct clk gpt1_ick = {
 
 static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1552,6 +1573,7 @@ static struct clk gpt1_fck = {
 
 static struct clk gpt2_ick = {
 	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1562,6 +1584,7 @@ static struct clk gpt2_ick = {
 
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1576,6 +1599,7 @@ static struct clk gpt2_fck = {
 
 static struct clk gpt3_ick = {
 	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1586,6 +1610,7 @@ static struct clk gpt3_ick = {
 
 static struct clk gpt3_fck = {
 	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1600,6 +1625,7 @@ static struct clk gpt3_fck = {
 
 static struct clk gpt4_ick = {
 	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1610,6 +1636,7 @@ static struct clk gpt4_ick = {
 
 static struct clk gpt4_fck = {
 	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1624,6 +1651,7 @@ static struct clk gpt4_fck = {
 
 static struct clk gpt5_ick = {
 	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1634,6 +1662,7 @@ static struct clk gpt5_ick = {
 
 static struct clk gpt5_fck = {
 	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1648,6 +1677,7 @@ static struct clk gpt5_fck = {
 
 static struct clk gpt6_ick = {
 	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1658,6 +1688,7 @@ static struct clk gpt6_ick = {
 
 static struct clk gpt6_fck = {
 	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1672,6 +1703,7 @@ static struct clk gpt6_fck = {
 
 static struct clk gpt7_ick = {
 	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1681,6 +1713,7 @@ static struct clk gpt7_ick = {
 
 static struct clk gpt7_fck = {
 	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1695,6 +1728,7 @@ static struct clk gpt7_fck = {
 
 static struct clk gpt8_ick = {
 	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1705,6 +1739,7 @@ static struct clk gpt8_ick = {
 
 static struct clk gpt8_fck = {
 	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1719,6 +1754,7 @@ static struct clk gpt8_fck = {
 
 static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1729,6 +1765,7 @@ static struct clk gpt9_ick = {
 
 static struct clk gpt9_fck = {
 	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1743,6 +1780,7 @@ static struct clk gpt9_fck = {
 
 static struct clk gpt10_ick = {
 	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1753,6 +1791,7 @@ static struct clk gpt10_ick = {
 
 static struct clk gpt10_fck = {
 	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1767,6 +1806,7 @@ static struct clk gpt10_fck = {
 
 static struct clk gpt11_ick = {
 	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1777,6 +1817,7 @@ static struct clk gpt11_ick = {
 
 static struct clk gpt11_fck = {
 	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1791,6 +1832,7 @@ static struct clk gpt11_fck = {
 
 static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1801,6 +1843,7 @@ static struct clk gpt12_ick = {
 
 static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1815,6 +1858,7 @@ static struct clk gpt12_fck = {
 
 static struct clk mcbsp1_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1826,6 +1870,7 @@ static struct clk mcbsp1_ick = {
 
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1837,6 +1882,7 @@ static struct clk mcbsp1_fck = {
 
 static struct clk mcbsp2_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1848,6 +1894,7 @@ static struct clk mcbsp2_ick = {
 
 static struct clk mcbsp2_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1859,6 +1906,7 @@ static struct clk mcbsp2_fck = {
 
 static struct clk mcbsp3_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1870,6 +1918,7 @@ static struct clk mcbsp3_ick = {
 
 static struct clk mcbsp3_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1881,6 +1930,7 @@ static struct clk mcbsp3_fck = {
 
 static struct clk mcbsp4_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1892,6 +1942,7 @@ static struct clk mcbsp4_ick = {
 
 static struct clk mcbsp4_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1903,6 +1954,7 @@ static struct clk mcbsp4_fck = {
 
 static struct clk mcbsp5_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1914,6 +1966,7 @@ static struct clk mcbsp5_ick = {
 
 static struct clk mcbsp5_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1925,6 +1978,7 @@ static struct clk mcbsp5_fck = {
 
 static struct clk mcspi1_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1936,6 +1990,7 @@ static struct clk mcspi1_ick = {
 
 static struct clk mcspi1_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1947,6 +2002,7 @@ static struct clk mcspi1_fck = {
 
 static struct clk mcspi2_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1958,6 +2014,7 @@ static struct clk mcspi2_ick = {
 
 static struct clk mcspi2_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -1969,6 +2026,7 @@ static struct clk mcspi2_fck = {
 
 static struct clk mcspi3_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1980,6 +2038,7 @@ static struct clk mcspi3_ick = {
 
 static struct clk mcspi3_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -1991,6 +2050,7 @@ static struct clk mcspi3_fck = {
 
 static struct clk uart1_ick = {
 	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2001,6 +2061,7 @@ static struct clk uart1_ick = {
 
 static struct clk uart1_fck = {
 	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2011,6 +2072,7 @@ static struct clk uart1_fck = {
 
 static struct clk uart2_ick = {
 	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2021,6 +2083,7 @@ static struct clk uart2_ick = {
 
 static struct clk uart2_fck = {
 	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2031,6 +2094,7 @@ static struct clk uart2_fck = {
 
 static struct clk uart3_ick = {
 	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2041,6 +2105,7 @@ static struct clk uart3_ick = {
 
 static struct clk uart3_fck = {
 	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2051,6 +2116,7 @@ static struct clk uart3_fck = {
 
 static struct clk gpios_ick = {
 	.name		= "gpios_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2061,6 +2127,7 @@ static struct clk gpios_ick = {
 
 static struct clk gpios_fck = {
 	.name		= "gpios_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
@@ -2071,6 +2138,7 @@ static struct clk gpios_fck = {
 
 static struct clk mpu_wdt_ick = {
 	.name		= "mpu_wdt_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2081,6 +2149,7 @@ static struct clk mpu_wdt_ick = {
 
 static struct clk mpu_wdt_fck = {
 	.name		= "mpu_wdt_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
@@ -2091,6 +2160,7 @@ static struct clk mpu_wdt_fck = {
 
 static struct clk sync_32k_ick = {
 	.name		= "sync_32k_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ENABLE_ON_INIT,
@@ -2102,6 +2172,7 @@ static struct clk sync_32k_ick = {
 
 static struct clk wdt1_ick = {
 	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2112,6 +2183,7 @@ static struct clk wdt1_ick = {
 
 static struct clk omapctrl_ick = {
 	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				ENABLE_ON_INIT,
@@ -2123,6 +2195,7 @@ static struct clk omapctrl_ick = {
 
 static struct clk icr_ick = {
 	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2133,6 +2206,7 @@ static struct clk icr_ick = {
 
 static struct clk cam_ick = {
 	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2148,6 +2222,7 @@ static struct clk cam_ick = {
  */
 static struct clk cam_fck = {
 	.name		= "cam_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2158,6 +2233,7 @@ static struct clk cam_fck = {
 
 static struct clk mailboxes_ick = {
 	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2168,6 +2244,7 @@ static struct clk mailboxes_ick = {
 
 static struct clk wdt4_ick = {
 	.name		= "wdt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2178,6 +2255,7 @@ static struct clk wdt4_ick = {
 
 static struct clk wdt4_fck = {
 	.name		= "wdt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2188,6 +2266,7 @@ static struct clk wdt4_fck = {
 
 static struct clk wdt3_ick = {
 	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2198,6 +2277,7 @@ static struct clk wdt3_ick = {
 
 static struct clk wdt3_fck = {
 	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2208,6 +2288,7 @@ static struct clk wdt3_fck = {
 
 static struct clk mspro_ick = {
 	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2218,6 +2299,7 @@ static struct clk mspro_ick = {
 
 static struct clk mspro_fck = {
 	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2228,6 +2310,7 @@ static struct clk mspro_fck = {
 
 static struct clk mmc_ick = {
 	.name		= "mmc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2238,6 +2321,7 @@ static struct clk mmc_ick = {
 
 static struct clk mmc_fck = {
 	.name		= "mmc_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2248,6 +2332,7 @@ static struct clk mmc_fck = {
 
 static struct clk fac_ick = {
 	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2258,6 +2343,7 @@ static struct clk fac_ick = {
 
 static struct clk fac_fck = {
 	.name		= "fac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2268,6 +2354,7 @@ static struct clk fac_fck = {
 
 static struct clk eac_ick = {
 	.name		= "eac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2278,6 +2365,7 @@ static struct clk eac_ick = {
 
 static struct clk eac_fck = {
 	.name		= "eac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2288,6 +2376,7 @@ static struct clk eac_fck = {
 
 static struct clk hdq_ick = {
 	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2298,6 +2387,7 @@ static struct clk hdq_ick = {
 
 static struct clk hdq_fck = {
 	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2308,6 +2398,7 @@ static struct clk hdq_fck = {
 
 static struct clk i2c2_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -2319,6 +2410,7 @@ static struct clk i2c2_ick = {
 
 static struct clk i2c2_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
@@ -2330,6 +2422,7 @@ static struct clk i2c2_fck = {
 
 static struct clk i2chs2_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -2341,6 +2434,7 @@ static struct clk i2chs2_fck = {
 
 static struct clk i2c1_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
@@ -2352,6 +2446,7 @@ static struct clk i2c1_ick = {
 
 static struct clk i2c1_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_12m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
@@ -2363,6 +2458,7 @@ static struct clk i2c1_fck = {
 
 static struct clk i2chs1_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -2402,6 +2498,7 @@ static struct clk sdma_ick = {
 
 static struct clk vlynq_ick = {
 	.name		= "vlynq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2437,6 +2534,7 @@ static const struct clksel vlynq_fck_clksel[] = {
 
 static struct clk vlynq_fck = {
 	.name		= "vlynq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2453,6 +2551,7 @@ static struct clk vlynq_fck = {
 
 static struct clk sdrc_ick = {
 	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2463,6 +2562,7 @@ static struct clk sdrc_ick = {
 
 static struct clk des_ick = {
 	.name		= "des_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2473,6 +2573,7 @@ static struct clk des_ick = {
 
 static struct clk sha_ick = {
 	.name		= "sha_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2483,6 +2584,7 @@ static struct clk sha_ick = {
 
 static struct clk rng_ick = {
 	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2493,6 +2595,7 @@ static struct clk rng_ick = {
 
 static struct clk aes_ick = {
 	.name		= "aes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2503,6 +2606,7 @@ static struct clk aes_ick = {
 
 static struct clk pka_ick = {
 	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2513,6 +2617,7 @@ static struct clk pka_ick = {
 
 static struct clk usb_fck = {
 	.name		= "usb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
 	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2523,6 +2628,7 @@ static struct clk usb_fck = {
 
 static struct clk usbhs_ick = {
 	.name		= "usbhs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2533,6 +2639,7 @@ static struct clk usbhs_ick = {
 
 static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2543,6 +2650,7 @@ static struct clk mmchs1_ick = {
 
 static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2553,6 +2661,7 @@ static struct clk mmchs1_fck = {
 
 static struct clk mmchs2_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -2564,6 +2673,7 @@ static struct clk mmchs2_ick = {
 
 static struct clk mmchs2_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
@@ -2574,6 +2684,7 @@ static struct clk mmchs2_fck = {
 
 static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2584,6 +2695,7 @@ static struct clk gpio5_ick = {
 
 static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2594,6 +2706,7 @@ static struct clk gpio5_fck = {
 
 static struct clk mdm_intc_ick = {
 	.name		= "mdm_intc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2604,6 +2717,7 @@ static struct clk mdm_intc_ick = {
 
 static struct clk mmchsdb1_fck = {
 	.name		= "mmchsdb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2614,6 +2728,7 @@ static struct clk mmchsdb1_fck = {
 
 static struct clk mmchsdb2_fck = {
 	.name		= "mmchsdb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 203e2bd3b3b..0d6a11ca132 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -216,6 +216,7 @@ static struct clk mcbsp_clks = {
 
 static struct clk sys_clkout1 = {
 	.name		= "sys_clkout1",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &osc_sys_ck,
 	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
@@ -535,6 +536,7 @@ static struct clk dpll3_m3_ck = {
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll3_m3x2_ck = {
 	.name		= "dpll3_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll3_m3_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
@@ -626,6 +628,7 @@ static struct clk dpll4_m2_ck = {
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m2x2_ck = {
 	.name		= "dpll4_m2x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
@@ -693,6 +696,7 @@ static struct clk dpll4_m3_ck = {
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m3x2_ck = {
 	.name		= "dpll4_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m3_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
@@ -798,6 +802,7 @@ static struct clk dpll4_m4_ck = {
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m4x2_ck = {
 	.name		= "dpll4_m4x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m4_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
@@ -821,6 +826,7 @@ static struct clk dpll4_m5_ck = {
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m5x2_ck = {
 	.name		= "dpll4_m5x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m5_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
@@ -844,6 +850,7 @@ static struct clk dpll4_m6_ck = {
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
 static struct clk dpll4_m6x2_ck = {
 	.name		= "dpll4_m6x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m6_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
@@ -960,6 +967,7 @@ static const struct clksel clkout2_src_clksel[] = {
 
 static struct clk clkout2_src_ck = {
 	.name		= "clkout2_src_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
@@ -1118,6 +1126,7 @@ static const struct clksel iva2_clksel[] = {
 
 static struct clk iva2_ck = {
 	.name		= "iva2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll2_m2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
@@ -1194,6 +1203,7 @@ static const struct clksel gfx_l3_clksel[] = {
 /* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
 static struct clk gfx_l3_ck = {
 	.name		= "gfx_l3_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
@@ -1226,6 +1236,7 @@ static struct clk gfx_l3_ick = {
 
 static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
@@ -1237,6 +1248,7 @@ static struct clk gfx_cg1_ck = {
 
 static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
@@ -1268,6 +1280,7 @@ static const struct clksel sgx_clksel[] = {
 
 static struct clk sgx_fck = {
 	.name		= "sgx_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
@@ -1281,6 +1294,7 @@ static struct clk sgx_fck = {
 
 static struct clk sgx_ick = {
 	.name		= "sgx_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
@@ -1294,6 +1308,7 @@ static struct clk sgx_ick = {
 
 static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1311,6 +1326,7 @@ static const struct clksel omap343x_gpt_clksel[] = {
 
 static struct clk gpt10_fck = {
 	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1325,6 +1341,7 @@ static struct clk gpt10_fck = {
 
 static struct clk gpt11_fck = {
 	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1339,6 +1356,7 @@ static struct clk gpt11_fck = {
 
 static struct clk cpefuse_fck = {
 	.name		= "cpefuse_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
@@ -1348,6 +1366,7 @@ static struct clk cpefuse_fck = {
 
 static struct clk ts_fck = {
 	.name		= "ts_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
@@ -1357,6 +1376,7 @@ static struct clk ts_fck = {
 
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_120m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
@@ -1377,6 +1397,7 @@ static struct clk core_96m_fck = {
 
 static struct clk mmchs3_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1388,6 +1409,7 @@ static struct clk mmchs3_fck = {
 
 static struct clk mmchs2_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1399,6 +1421,7 @@ static struct clk mmchs2_fck = {
 
 static struct clk mspro_fck = {
 	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
@@ -1409,6 +1432,7 @@ static struct clk mspro_fck = {
 
 static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
@@ -1419,6 +1443,7 @@ static struct clk mmchs1_fck = {
 
 static struct clk i2c3_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1430,6 +1455,7 @@ static struct clk i2c3_fck = {
 
 static struct clk i2c2_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1441,6 +1467,7 @@ static struct clk i2c2_fck = {
 
 static struct clk i2c1_fck = {
 	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1472,6 +1499,7 @@ static const struct clksel mcbsp_15_clksel[] = {
 
 static struct clk mcbsp5_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1486,6 +1514,7 @@ static struct clk mcbsp5_fck = {
 
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1511,6 +1540,7 @@ static struct clk core_48m_fck = {
 
 static struct clk mcspi4_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1521,6 +1551,7 @@ static struct clk mcspi4_fck = {
 
 static struct clk mcspi3_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1531,6 +1562,7 @@ static struct clk mcspi3_fck = {
 
 static struct clk mcspi2_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1541,6 +1573,7 @@ static struct clk mcspi2_fck = {
 
 static struct clk mcspi1_fck = {
 	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1551,6 +1584,7 @@ static struct clk mcspi1_fck = {
 
 static struct clk uart2_fck = {
 	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
@@ -1560,6 +1594,7 @@ static struct clk uart2_fck = {
 
 static struct clk uart1_fck = {
 	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
@@ -1569,6 +1604,7 @@ static struct clk uart1_fck = {
 
 static struct clk fshostusb_fck = {
 	.name		= "fshostusb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
@@ -1589,6 +1625,7 @@ static struct clk core_12m_fck = {
 
 static struct clk hdq_fck = {
 	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_12m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
@@ -1615,6 +1652,7 @@ static const struct clksel ssi_ssr_clksel[] = {
 
 static struct clk ssi_ssr_fck = {
 	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
@@ -1655,6 +1693,7 @@ static struct clk core_l3_ick = {
 
 static struct clk hsotgusb_ick = {
 	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
@@ -1665,6 +1704,7 @@ static struct clk hsotgusb_ick = {
 
 static struct clk sdrc_ick = {
 	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
@@ -1694,6 +1734,7 @@ static struct clk security_l3_ick = {
 
 static struct clk pka_ick = {
 	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
@@ -1715,6 +1756,7 @@ static struct clk core_l4_ick = {
 
 static struct clk usbtll_ick = {
 	.name		= "usbtll_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
@@ -1725,6 +1767,7 @@ static struct clk usbtll_ick = {
 
 static struct clk mmchs3_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1737,6 +1780,7 @@ static struct clk mmchs3_ick = {
 /* Intersystem Communication Registers - chassis mode only */
 static struct clk icr_ick = {
 	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
@@ -1747,6 +1791,7 @@ static struct clk icr_ick = {
 
 static struct clk aes2_ick = {
 	.name		= "aes2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
@@ -1757,6 +1802,7 @@ static struct clk aes2_ick = {
 
 static struct clk sha12_ick = {
 	.name		= "sha12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
@@ -1767,6 +1813,7 @@ static struct clk sha12_ick = {
 
 static struct clk des2_ick = {
 	.name		= "des2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
@@ -1777,6 +1824,7 @@ static struct clk des2_ick = {
 
 static struct clk mmchs2_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1788,6 +1836,7 @@ static struct clk mmchs2_ick = {
 
 static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
@@ -1798,6 +1847,7 @@ static struct clk mmchs1_ick = {
 
 static struct clk mspro_ick = {
 	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
@@ -1808,6 +1858,7 @@ static struct clk mspro_ick = {
 
 static struct clk hdq_ick = {
 	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
@@ -1818,6 +1869,7 @@ static struct clk hdq_ick = {
 
 static struct clk mcspi4_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1829,6 +1881,7 @@ static struct clk mcspi4_ick = {
 
 static struct clk mcspi3_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1840,6 +1893,7 @@ static struct clk mcspi3_ick = {
 
 static struct clk mcspi2_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1851,6 +1905,7 @@ static struct clk mcspi2_ick = {
 
 static struct clk mcspi1_ick = {
 	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1862,6 +1917,7 @@ static struct clk mcspi1_ick = {
 
 static struct clk i2c3_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1873,6 +1929,7 @@ static struct clk i2c3_ick = {
 
 static struct clk i2c2_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1884,6 +1941,7 @@ static struct clk i2c2_ick = {
 
 static struct clk i2c1_ick = {
 	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1895,6 +1953,7 @@ static struct clk i2c1_ick = {
 
 static struct clk uart2_ick = {
 	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
@@ -1905,6 +1964,7 @@ static struct clk uart2_ick = {
 
 static struct clk uart1_ick = {
 	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
@@ -1915,6 +1975,7 @@ static struct clk uart1_ick = {
 
 static struct clk gpt11_ick = {
 	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
@@ -1925,6 +1986,7 @@ static struct clk gpt11_ick = {
 
 static struct clk gpt10_ick = {
 	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
@@ -1935,6 +1997,7 @@ static struct clk gpt10_ick = {
 
 static struct clk mcbsp5_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1946,6 +2009,7 @@ static struct clk mcbsp5_ick = {
 
 static struct clk mcbsp1_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1957,6 +2021,7 @@ static struct clk mcbsp1_ick = {
 
 static struct clk fac_ick = {
 	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
@@ -1967,6 +2032,7 @@ static struct clk fac_ick = {
 
 static struct clk mailboxes_ick = {
 	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
@@ -1977,6 +2043,7 @@ static struct clk mailboxes_ick = {
 
 static struct clk omapctrl_ick = {
 	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
@@ -1997,6 +2064,7 @@ static struct clk ssi_l4_ick = {
 
 static struct clk ssi_ick = {
 	.name		= "ssi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &ssi_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
@@ -2015,6 +2083,7 @@ static const struct clksel usb_l4_clksel[] = {
 
 static struct clk usb_l4_ick = {
 	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -2040,6 +2109,7 @@ static struct clk security_l4_ick2 = {
 
 static struct clk aes1_ick = {
 	.name		= "aes1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
@@ -2049,6 +2119,7 @@ static struct clk aes1_ick = {
 
 static struct clk rng_ick = {
 	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
@@ -2058,6 +2129,7 @@ static struct clk rng_ick = {
 
 static struct clk sha11_ick = {
 	.name		= "sha11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
@@ -2067,6 +2139,7 @@ static struct clk sha11_ick = {
 
 static struct clk des1_ick = {
 	.name		= "des1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
@@ -2083,6 +2156,7 @@ static const struct clksel dss1_alwon_fck_clksel[] = {
 
 static struct clk dss1_alwon_fck = {
 	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m4x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2097,6 +2171,7 @@ static struct clk dss1_alwon_fck = {
 
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_54m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2108,6 +2183,7 @@ static struct clk dss_tv_fck = {
 
 static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_96m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2119,6 +2195,7 @@ static struct clk dss_96m_fck = {
 
 static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2131,6 +2208,7 @@ static struct clk dss2_alwon_fck = {
 static struct clk dss_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
@@ -2150,6 +2228,7 @@ static const struct clksel cam_mclk_clksel[] = {
 
 static struct clk cam_mclk = {
 	.name		= "cam_mclk",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m5x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
@@ -2165,6 +2244,7 @@ static struct clk cam_mclk = {
 static struct clk cam_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
@@ -2178,6 +2258,7 @@ static struct clk cam_ick = {
 
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_120m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2189,6 +2270,7 @@ static struct clk usbhost_120m_fck = {
 
 static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2201,6 +2283,7 @@ static struct clk usbhost_48m_fck = {
 static struct clk usbhost_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "usbhost_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
@@ -2212,6 +2295,7 @@ static struct clk usbhost_ick = {
 
 static struct clk usbhost_sar_fck = {
 	.name		= "usbhost_sar_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &osc_sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
@@ -2249,6 +2333,7 @@ static const struct clksel usim_clksel[] = {
 /* 3430ES2 only */
 static struct clk usim_fck = {
 	.name		= "usim_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
@@ -2262,6 +2347,7 @@ static struct clk usim_fck = {
 /* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
 static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
@@ -2285,6 +2371,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2295,6 +2382,7 @@ static struct clk gpio1_dbck = {
 
 static struct clk wdt2_fck = {
 	.name		= "wdt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
@@ -2316,6 +2404,7 @@ static struct clk wkup_l4_ick = {
 /* Never specifically named in the TRM, so we have to infer a likely name */
 static struct clk usim_ick = {
 	.name		= "usim_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
@@ -2326,6 +2415,7 @@ static struct clk usim_ick = {
 
 static struct clk wdt2_ick = {
 	.name		= "wdt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
@@ -2336,6 +2426,7 @@ static struct clk wdt2_ick = {
 
 static struct clk wdt1_ick = {
 	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
@@ -2346,6 +2437,7 @@ static struct clk wdt1_ick = {
 
 static struct clk gpio1_ick = {
 	.name		= "gpio1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2356,6 +2448,7 @@ static struct clk gpio1_ick = {
 
 static struct clk omap_32ksync_ick = {
 	.name		= "omap_32ksync_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
@@ -2367,6 +2460,7 @@ static struct clk omap_32ksync_ick = {
 /* XXX This clock no longer exists in 3430 TRM rev F */
 static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
@@ -2377,6 +2471,7 @@ static struct clk gpt12_ick = {
 
 static struct clk gpt1_ick = {
 	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
@@ -2411,6 +2506,7 @@ static struct clk per_48m_fck = {
 
 static struct clk uart3_fck = {
 	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
@@ -2421,6 +2517,7 @@ static struct clk uart3_fck = {
 
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
@@ -2434,6 +2531,7 @@ static struct clk gpt2_fck = {
 
 static struct clk gpt3_fck = {
 	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
@@ -2447,6 +2545,7 @@ static struct clk gpt3_fck = {
 
 static struct clk gpt4_fck = {
 	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
@@ -2460,6 +2559,7 @@ static struct clk gpt4_fck = {
 
 static struct clk gpt5_fck = {
 	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
@@ -2473,6 +2573,7 @@ static struct clk gpt5_fck = {
 
 static struct clk gpt6_fck = {
 	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
@@ -2486,6 +2587,7 @@ static struct clk gpt6_fck = {
 
 static struct clk gpt7_fck = {
 	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
@@ -2499,6 +2601,7 @@ static struct clk gpt7_fck = {
 
 static struct clk gpt8_fck = {
 	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
@@ -2512,6 +2615,7 @@ static struct clk gpt8_fck = {
 
 static struct clk gpt9_fck = {
 	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
@@ -2534,6 +2638,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2544,6 +2649,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2554,6 +2660,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2564,6 +2671,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2574,6 +2682,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
@@ -2584,6 +2693,7 @@ static struct clk gpio2_dbck = {
 
 static struct clk wdt3_fck = {
 	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
@@ -2603,6 +2713,7 @@ static struct clk per_l4_ick = {
 
 static struct clk gpio6_ick = {
 	.name		= "gpio6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2613,6 +2724,7 @@ static struct clk gpio6_ick = {
 
 static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2623,6 +2735,7 @@ static struct clk gpio5_ick = {
 
 static struct clk gpio4_ick = {
 	.name		= "gpio4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2633,6 +2746,7 @@ static struct clk gpio4_ick = {
 
 static struct clk gpio3_ick = {
 	.name		= "gpio3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2643,6 +2757,7 @@ static struct clk gpio3_ick = {
 
 static struct clk gpio2_ick = {
 	.name		= "gpio2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
@@ -2653,6 +2768,7 @@ static struct clk gpio2_ick = {
 
 static struct clk wdt3_ick = {
 	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
@@ -2663,6 +2779,7 @@ static struct clk wdt3_ick = {
 
 static struct clk uart3_ick = {
 	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
@@ -2673,6 +2790,7 @@ static struct clk uart3_ick = {
 
 static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
@@ -2683,6 +2801,7 @@ static struct clk gpt9_ick = {
 
 static struct clk gpt8_ick = {
 	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
@@ -2693,6 +2812,7 @@ static struct clk gpt8_ick = {
 
 static struct clk gpt7_ick = {
 	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
@@ -2703,6 +2823,7 @@ static struct clk gpt7_ick = {
 
 static struct clk gpt6_ick = {
 	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
@@ -2713,6 +2834,7 @@ static struct clk gpt6_ick = {
 
 static struct clk gpt5_ick = {
 	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
@@ -2723,6 +2845,7 @@ static struct clk gpt5_ick = {
 
 static struct clk gpt4_ick = {
 	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
@@ -2733,6 +2856,7 @@ static struct clk gpt4_ick = {
 
 static struct clk gpt3_ick = {
 	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
@@ -2743,6 +2867,7 @@ static struct clk gpt3_ick = {
 
 static struct clk gpt2_ick = {
 	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
@@ -2753,6 +2878,7 @@ static struct clk gpt2_ick = {
 
 static struct clk mcbsp2_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
@@ -2764,6 +2890,7 @@ static struct clk mcbsp2_ick = {
 
 static struct clk mcbsp3_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
@@ -2775,6 +2902,7 @@ static struct clk mcbsp3_ick = {
 
 static struct clk mcbsp4_ick = {
 	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
@@ -2792,6 +2920,7 @@ static const struct clksel mcbsp_234_clksel[] = {
 
 static struct clk mcbsp2_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2806,6 +2935,7 @@ static struct clk mcbsp2_fck = {
 
 static struct clk mcbsp3_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2820,6 +2950,7 @@ static struct clk mcbsp3_fck = {
 
 static struct clk mcbsp4_fck = {
 	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2988,6 +3119,7 @@ static struct clk traceclk_fck = {
 /* SmartReflex fclk (VDD1) */
 static struct clk sr1_fck = {
 	.name		= "sr1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
@@ -2998,6 +3130,7 @@ static struct clk sr1_fck = {
 /* SmartReflex fclk (VDD2) */
 static struct clk sr2_fck = {
 	.name		= "sr2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-- 
cgit v1.2.3


From bc51da4ee46d481dc3fbc57ec407594b80e92705 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 18:59:32 +0000
Subject: [ARM] omap: eliminate unnecessary conditionals in
 omap2_clk_wait_ready

Rather than employing run-time tests in omap2_clk_wait_ready() to
decide whether we need to wait for the clock to become ready, we
can set the .ops appropriately.

This change deals with the OMAP24xx and OMAP34xx conditionals only.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c     | 42 +++++++++++++++++++++--------------------
 arch/arm/mach-omap2/clock.h     |  1 +
 arch/arm/mach-omap2/clock24xx.h | 10 +++++-----
 arch/arm/mach-omap2/clock34xx.h | 14 +++++++-------
 4 files changed, 35 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 8c09711d2ea..986c9f58275 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -237,23 +237,6 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	else
 		return;
 
-	/* REVISIT: What are the appropriate exclusions for 34XX? */
-	/* No check for DSS or cam clocks */
-	if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
-		if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
-		    clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
-		    clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
-			return;
-	}
-
-	/* REVISIT: What are the appropriate exclusions for 34XX? */
-	/* OMAP3: ignore DSS-mod clocks */
-	if (cpu_is_omap34xx() &&
-	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
-	     ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
-	     clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
-		return;
-
 	/* Check if both functional and interface clocks
 	 * are running. */
 	bit = 1 << clk->enable_bit;
@@ -264,7 +247,7 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	omap2_wait_clock_ready(st_reg, bit, clk->name);
 }
 
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
+static int omap2_dflt_clk_enable(struct clk *clk)
 {
 	u32 regval32;
 
@@ -282,11 +265,25 @@ static int omap2_dflt_clk_enable_wait(struct clk *clk)
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 
-	omap2_clk_wait_ready(clk);
-
 	return 0;
 }
 
+static int omap2_dflt_clk_enable_wait(struct clk *clk)
+{
+	int ret;
+
+	if (unlikely(clk->enable_reg == NULL)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return 0; /* REVISIT: -EINVAL */
+	}
+
+	ret = omap2_dflt_clk_enable(clk);
+	if (ret == 0)
+		omap2_clk_wait_ready(clk);
+	return ret;
+}
+
 static void omap2_dflt_clk_disable(struct clk *clk)
 {
 	u32 regval32;
@@ -315,6 +312,11 @@ const struct clkops clkops_omap2_dflt_wait = {
 	.disable	= omap2_dflt_clk_disable,
 };
 
+const struct clkops clkops_omap2_dflt = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+};
+
 /* Enables clock without considering parent dependencies or use count
  * REVISIT: Maybe change this to use clk->enable like on omap1?
  */
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d4bdb59b300..b0358b659b4 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -52,6 +52,7 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
 
 extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_omap2_dflt;
 
 extern u8 cpu_mask;
 
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index b59bf902ce7..d386b3dfaba 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -1455,7 +1455,7 @@ static const struct clksel dss1_fck_clksel[] = {
 
 static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 	.name		= "dss_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ck,	/* really both l3 and l4 */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
@@ -1466,7 +1466,7 @@ static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 
 static struct clk dss1_fck = {
 	.name		= "dss1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_ck,		/* Core or sys */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
@@ -1500,7 +1500,7 @@ static const struct clksel dss2_fck_clksel[] = {
 
 static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.name		= "dss2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				DELAYED_APP,
@@ -2206,7 +2206,7 @@ static struct clk icr_ick = {
 
 static struct clk cam_ick = {
 	.name		= "cam_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2222,7 +2222,7 @@ static struct clk cam_ick = {
  */
 static struct clk cam_fck = {
 	.name		= "cam_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 0d6a11ca132..1ff05d351b3 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1652,7 +1652,7 @@ static const struct clksel ssi_ssr_clksel[] = {
 
 static struct clk ssi_ssr_fck = {
 	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
@@ -2064,7 +2064,7 @@ static struct clk ssi_l4_ick = {
 
 static struct clk ssi_ick = {
 	.name		= "ssi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &ssi_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
@@ -2156,7 +2156,7 @@ static const struct clksel dss1_alwon_fck_clksel[] = {
 
 static struct clk dss1_alwon_fck = {
 	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2171,7 +2171,7 @@ static struct clk dss1_alwon_fck = {
 
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_54m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2183,7 +2183,7 @@ static struct clk dss_tv_fck = {
 
 static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_96m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2195,7 +2195,7 @@ static struct clk dss_96m_fck = {
 
 static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
@@ -2208,7 +2208,7 @@ static struct clk dss2_alwon_fck = {
 static struct clk dss_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-- 
cgit v1.2.3


From c1168dc31d8e0688168030ac66341897ed7ca32a Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 21:24:00 +0000
Subject: [ARM] omap: don't use clkops_omap2_dflt_wait for non-ICLK/FCLK clocks

The original code in omap2_clk_wait_ready() used to check the low 8
bits to determine whether they were within the FCLKEN or ICLKEN
registers.  Specifically, the test is satisfied when these offsets
are used:

 CM_FCLKEN, CM_FCLKEN1, CM_CLKEN, OMAP24XX_CM_FCLKEN2, CM_ICLKEN,
 CM_ICLKEN1, CM_ICLKEN2, CM_ICLKEN3, OMAP24XX_CM_ICLKEN4
 OMAP3430_CM_CLKEN_PLL, OMAP3430ES2_CM_CLKEN2

If one of these offsets isn't used, omap2_clk_wait_ready() merely
returns without doing anything.  So we should use the non-wait clkops
version instead and eliminate that conditional.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c     | 14 ++++++--------
 arch/arm/mach-omap2/clock24xx.h |  6 +++---
 arch/arm/mach-omap2/clock34xx.h | 12 ++++++------
 3 files changed, 15 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 986c9f58275..76afb7b4482 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -228,14 +228,12 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	 * it and pull it into struct clk itself somehow.
 	 */
 	reg = clk->enable_reg;
-	if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
-	    (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
-		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
-	else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
-		 (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
-		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
-	else
-		return;
+
+	/*
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
+	 */
+	other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
 
 	/* Check if both functional and interface clocks
 	 * are running. */
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index d386b3dfaba..486fd80143e 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -890,7 +890,7 @@ static const struct clksel common_clkout_src_clksel[] = {
 
 static struct clk sys_clkout_src = {
 	.name		= "sys_clkout_src",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_PROPAGATES,
@@ -937,7 +937,7 @@ static struct clk sys_clkout = {
 /* In 2430, new in 2420 ES2 */
 static struct clk sys_clkout2_src = {
 	.name		= "sys_clkout2_src",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
@@ -974,7 +974,7 @@ static struct clk sys_clkout2 = {
 
 static struct clk emul_ck = {
 	.name		= "emul_ck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
 	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "wkup_clkdm",
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 1ff05d351b3..335ef88ada5 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -216,7 +216,7 @@ static struct clk mcbsp_clks = {
 
 static struct clk sys_clkout1 = {
 	.name		= "sys_clkout1",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &osc_sys_ck,
 	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
@@ -967,7 +967,7 @@ static const struct clksel clkout2_src_clksel[] = {
 
 static struct clk clkout2_src_ck = {
 	.name		= "clkout2_src_ck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
@@ -1356,7 +1356,7 @@ static struct clk gpt11_fck = {
 
 static struct clk cpefuse_fck = {
 	.name		= "cpefuse_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
@@ -1366,7 +1366,7 @@ static struct clk cpefuse_fck = {
 
 static struct clk ts_fck = {
 	.name		= "ts_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
@@ -1376,7 +1376,7 @@ static struct clk ts_fck = {
 
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_120m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
@@ -2295,7 +2295,7 @@ static struct clk usbhost_ick = {
 
 static struct clk usbhost_sar_fck = {
 	.name		= "usbhost_sar_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &osc_sys_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
-- 
cgit v1.2.3


From eee5b19119458cd399ce4deaabea07c8d07159ae Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 21:42:54 +0000
Subject: [ARM] omap: remove clk->owner

clk->owner is always NULL, so its existence doesn't serve any useful
function other than bloating the kernel by 992 bytes.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/clock.c              | 7 ++-----
 arch/arm/plat-omap/include/mach/clock.h | 1 -
 2 files changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 529c4a9f012..c53205c574d 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -53,15 +53,14 @@ struct clk * clk_get(struct device *dev, const char *id)
 	mutex_lock(&clocks_mutex);
 
 	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+		if (p->id == idno && strcmp(id, p->name) == 0) {
 			clk = p;
 			goto found;
 		}
 	}
 
 	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+		if (strcmp(id, p->name) == 0) {
 			clk = p;
 			break;
 		}
@@ -148,8 +147,6 @@ EXPORT_SYMBOL(clk_get_rate);
 
 void clk_put(struct clk *clk)
 {
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
 }
 EXPORT_SYMBOL(clk_put);
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 40a2ac353de..547619f8356 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -65,7 +65,6 @@ struct dpll_data {
 struct clk {
 	struct list_head	node;
 	const struct clkops	*ops;
-	struct module		*owner;
 	const char		*name;
 	int			id;
 	struct clk		*parent;
-- 
cgit v1.2.3


From ebb8dca2957f3bb79eea8eec0c7d1c8c3fa9a5be Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 4 Nov 2008 21:50:46 +0000
Subject: [ARM] omap: rearrange clock.h structure order

... to eliminate unnecessary padding.  We have rather a lot of these
structures, so eliminating unnecessary padding results in a saving of
1488 bytes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/include/mach/clock.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 547619f8356..6c24835e174 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -25,8 +25,8 @@ struct clkops {
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
 struct clksel_rate {
-	u8			div;
 	u32			val;
+	u8			div;
 	u8			flags;
 };
 
@@ -39,23 +39,23 @@ struct dpll_data {
 	void __iomem		*mult_div1_reg;
 	u32			mult_mask;
 	u32			div1_mask;
+	unsigned int		rate_tolerance;
+	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
 	u8			last_rounded_n;
-	unsigned long		last_rounded_rate;
-	unsigned int		rate_tolerance;
-	u16			max_multiplier;
 	u8			max_divider;
 	u32			max_tolerance;
+	u16			max_multiplier;
 #  if defined(CONFIG_ARCH_OMAP3)
 	u8			modes;
 	void __iomem		*control_reg;
+	void __iomem		*autoidle_reg;
+	void __iomem		*idlest_reg;
 	u32			enable_mask;
+	u32			autoidle_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	void __iomem		*autoidle_reg;
-	u32			autoidle_mask;
-	void __iomem		*idlest_reg;
 	u8			idlest_bit;
 #  endif
 };
@@ -71,12 +71,12 @@ struct clk {
 	unsigned long		rate;
 	__u32			flags;
 	void __iomem		*enable_reg;
-	__u8			enable_bit;
-	__s8			usecount;
 	void			(*recalc)(struct clk *);
 	int			(*set_rate)(struct clk *, unsigned long);
 	long			(*round_rate)(struct clk *, unsigned long);
 	void			(*init)(struct clk *);
+	__u8			enable_bit;
+	__s8			usecount;
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	u8			fixed_div;
 	void __iomem		*clksel_reg;
-- 
cgit v1.2.3


From ae8fce5c3baf84e319269e67823cf337ed9d359a Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 5 Nov 2008 12:54:04 +0000
Subject: [ARM] omap: remove clk_deny_idle and clk_allow_idle

Nothing makes any use of these functions, so there's little point in
providing them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/clock.c              | 28 ----------------------------
 arch/arm/plat-omap/include/mach/clock.h |  2 --
 arch/arm/plat-omap/include/mach/pm.h    | 12 ------------
 3 files changed, 42 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c53205c574d..7b040072859 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -316,34 +316,6 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-void clk_deny_idle(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_deny_idle)
-		arch_clock->clk_deny_idle(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_deny_idle);
-
-void clk_allow_idle(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_allow_idle)
-		arch_clock->clk_allow_idle(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_allow_idle);
-
 void clk_enable_init_clocks(void)
 {
 	struct clk *clkp;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 6c24835e174..4831bbdaf01 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -119,8 +119,6 @@ extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
 extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
 extern int clk_get_usecount(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 2a9c27ad4c3..ca81830b4f8 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -118,18 +118,6 @@
 extern void prevent_idle_sleep(void);
 extern void allow_idle_sleep(void);
 
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_allow_idle(struct clk *clk);
-
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
 extern void omap730_cpu_suspend(unsigned short, unsigned short);
-- 
cgit v1.2.3


From 2e777bf1f2482be13c2b678744d3497a4f0a0ec2 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 8 Feb 2009 17:49:22 +0000
Subject: [ARM] omap: provide a standard clk_get_parent() implementation

which only has to return clk->parent.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/clock.c              | 13 +------------
 arch/arm/plat-omap/include/mach/clock.h |  1 -
 2 files changed, 1 insertion(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 7b040072859..ae77e10719f 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -207,18 +207,7 @@ EXPORT_SYMBOL(clk_set_parent);
 
 struct clk *clk_get_parent(struct clk *clk)
 {
-	unsigned long flags;
-	struct clk * ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_get_parent)
-		ret = arch_clock->clk_get_parent(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
+	return clk->parent;
 }
 EXPORT_SYMBOL(clk_get_parent);
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 4831bbdaf01..06dd38a8a0c 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -102,7 +102,6 @@ struct clk_functions {
 	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
 	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
 	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	struct clk *	(*clk_get_parent)(struct clk *clk);
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
-- 
cgit v1.2.3


From c6af45085211db8720d6b94b3985ce7198d764e3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 13 Nov 2008 13:01:32 +0000
Subject: [ARM] omap: move clock propagation into core omap clock code

Move the clock propagation calls for set_parent and set_rate into
the core omap clock code, rather than having these calls scattered
throughout the OMAP1 and OMAP2 implementations.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 3 ---
 arch/arm/mach-omap2/clock.c | 6 ------
 arch/arm/plat-omap/clock.c  | 6 +++++-
 3 files changed, 5 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index ff408105ffb..ee1b9f20544 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -628,9 +628,6 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 		ret = 0;
 	}
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
-
 	return ret;
 }
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 76afb7b4482..7a1d56af9e4 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -684,9 +684,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	if (clk->set_rate != NULL)
 		ret = clk->set_rate(clk, rate);
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
-
 	return ret;
 }
 
@@ -774,9 +771,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
 		 clk->name, clk->parent->name, clk->rate);
 
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
-
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index ae77e10719f..b7137c560db 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -182,6 +182,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_rate)
 		ret = arch_clock->clk_set_rate(clk, rate);
+	if (ret == 0 && (clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
@@ -198,7 +200,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_parent)
-		ret =  arch_clock->clk_set_parent(clk, parent);
+		ret = arch_clock->clk_set_parent(clk, parent);
+	if (ret == 0 && (clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
-- 
cgit v1.2.3


From a9e882096317a088087b608d272da7029a6cc8c8 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 13 Nov 2008 13:07:00 +0000
Subject: [ARM] omap: remove unnecessary calls to propagate_rate()

We've always called propagate_rate() in the parent function to
the .set_rate methods, so there's no point having the .set_rate
methods also call this heavy-weight function - it's mere
duplication of what's happening elsewhere.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index ee1b9f20544..80a58e9dbba 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -308,7 +308,6 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
 	ck_dpll1.rate = ptr->pll_rate;
-	propagate_rate(&ck_dpll1);
 	return 0;
 }
 
@@ -333,9 +332,6 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 		ret = 0;
 	}
 
-	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
-		propagate_rate(clk);
-
 	return ret;
 }
 
@@ -442,8 +438,6 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 	omap_writel(l, MOD_CONF_CTRL_1);
 
 	clk->rate = p_rate / (div + 1);
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
 
 	return 0;
 }
@@ -787,7 +781,6 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-	propagate_rate(&ck_dpll1);
 #else
 	/* Find the highest supported frequency and enable it */
 	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
@@ -796,9 +789,9 @@ int __init omap1_clk_init(void)
 		omap_writew(0x2290, DPLL_CTL);
 		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
-		propagate_rate(&ck_dpll1);
 	}
 #endif
+	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
 	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-- 
cgit v1.2.3


From 9a5fedac187f30116013a8420149d4ca11a44f0d Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 13 Nov 2008 13:44:15 +0000
Subject: [ARM] omap: move propagate_rate() calls into generic omap clock code

propagate_rate() is recursive, so it makes sense to minimise the
amount of stack which is used for each recursion.  So, rather than
recursing back into it from the ->recalc functions if RATE_PROPAGATES
is set, do that test at the higher level.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c     |  6 ------
 arch/arm/mach-omap2/clock.c     |  6 ------
 arch/arm/mach-omap2/clock24xx.c |  6 ++----
 arch/arm/mach-omap2/clock24xx.h |  4 ----
 arch/arm/mach-omap2/clock34xx.c |  5 -----
 arch/arm/mach-omap2/clock34xx.h | 10 ----------
 arch/arm/plat-omap/clock.c      | 14 +++++++++-----
 7 files changed, 11 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 80a58e9dbba..be500014dcb 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -244,9 +244,6 @@ static void omap1_ckctl_recalc(struct clk * clk)
 	if (unlikely(clk->rate == clk->parent->rate / dsor))
 		return; /* No change, quick exit */
 	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
 }
 
 static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
@@ -267,9 +264,6 @@ static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
 	if (unlikely(clk->rate == clk->parent->rate / dsor))
 		return; /* No change, quick exit */
 	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
 }
 
 /* MPU virtual clock functions */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a1d56af9e4..53fda9977d5 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -167,9 +167,6 @@ void omap2_fixed_divisor_recalc(struct clk *clk)
 	WARN_ON(!clk->fixed_div);
 
 	clk->rate = clk->parent->rate / clk->fixed_div;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
 }
 
 /**
@@ -392,9 +389,6 @@ void omap2_clksel_recalc(struct clk *clk)
 	clk->rate = clk->parent->rate / div;
 
 	pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 866a618c4d8..3a0a1b8aa0b 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -199,8 +199,6 @@ long omap2_dpllcore_round_rate(unsigned long target_rate)
 static void omap2_dpllcore_recalc(struct clk *clk)
 {
 	clk->rate = omap2_get_dpll_rate_24xx(clk);
-
-	propagate_rate(clk);
 }
 
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -442,13 +440,11 @@ static u32 omap2_get_sysclkdiv(void)
 static void omap2_osc_clk_recalc(struct clk *clk)
 {
 	clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-	propagate_rate(clk);
 }
 
 static void omap2_sys_clk_recalc(struct clk *clk)
 {
 	clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
-	propagate_rate(clk);
 }
 
 /*
@@ -502,7 +498,9 @@ int __init omap2_clk_init(void)
 	clk_init(&omap2_clk_functions);
 
 	omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
 	omap2_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
 
 	for (clkp = onchip_24xx_clks;
 	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 486fd80143e..e07dcba4b3e 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -624,7 +624,6 @@ static struct clk func_32k_ck = {
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_FIXED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &propagate_rate,
 };
 
 /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
@@ -655,7 +654,6 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
 				RATE_FIXED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &propagate_rate,
 };
 
 /*
@@ -702,7 +700,6 @@ static struct clk apll96_ck = {
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk apll54_ck = {
@@ -715,7 +712,6 @@ static struct clk apll54_ck = {
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
-	.recalc		= &propagate_rate,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 2f2d43db2dd..52698fb4fd0 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -57,8 +57,6 @@ static const struct clkops clkops_noncore_dpll_ops;
 static void omap3_dpll_recalc(struct clk *clk)
 {
 	clk->rate = omap2_get_dpll_rate(clk);
-
-	propagate_rate(clk);
 }
 
 /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
@@ -388,9 +386,6 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 		clk->rate = clk->parent->rate;
 	else
 		clk->rate = clk->parent->rate * 2;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
 }
 
 /* Common clock code */
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 335ef88ada5..dcacec84f8c 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -58,7 +58,6 @@ static struct clk omap_32k_fck = {
 	.ops		= &clkops_null,
 	.rate		= 32768,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk secure_32k_fck = {
@@ -66,7 +65,6 @@ static struct clk secure_32k_fck = {
 	.ops		= &clkops_null,
 	.rate		= 32768,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 /* Virtual source clocks for osc_sys_ck */
@@ -75,7 +73,6 @@ static struct clk virt_12m_ck = {
 	.ops		= &clkops_null,
 	.rate		= 12000000,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_13m_ck = {
@@ -83,7 +80,6 @@ static struct clk virt_13m_ck = {
 	.ops		= &clkops_null,
 	.rate		= 13000000,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_16_8m_ck = {
@@ -91,7 +87,6 @@ static struct clk virt_16_8m_ck = {
 	.ops		= &clkops_null,
 	.rate		= 16800000,
 	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_19_2m_ck = {
@@ -99,7 +94,6 @@ static struct clk virt_19_2m_ck = {
 	.ops		= &clkops_null,
 	.rate		= 19200000,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_26m_ck = {
@@ -107,7 +101,6 @@ static struct clk virt_26m_ck = {
 	.ops		= &clkops_null,
 	.rate		= 26000000,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static struct clk virt_38_4m_ck = {
@@ -115,7 +108,6 @@ static struct clk virt_38_4m_ck = {
 	.ops		= &clkops_null,
 	.rate		= 38400000,
 	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -201,7 +193,6 @@ static struct clk sys_altclk = {
 	.name		= "sys_altclk",
 	.ops		= &clkops_null,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 /* Optional external clock input for some McBSPs */
@@ -209,7 +200,6 @@ static struct clk mcbsp_clks = {
 	.name		= "mcbsp_clks",
 	.ops		= &clkops_null,
 	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
-	.recalc		= &propagate_rate,
 };
 
 /* PRM EXTERNAL CLOCK OUTPUT */
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index b7137c560db..df58f5d9a5a 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -246,8 +246,6 @@ void followparent_recalc(struct clk *clk)
 		return;
 
 	clk->rate = clk->parent->rate;
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
 }
 
 /* Propagate rate to children */
@@ -261,8 +259,10 @@ void propagate_rate(struct clk * tclk)
 	list_for_each_entry(clkp, &clocks, node) {
 		if (likely(clkp->parent != tclk))
 			continue;
-		if (likely((u32)clkp->recalc))
+		if (clkp->recalc)
 			clkp->recalc(clkp);
+		if (clkp->flags & RATE_PROPAGATES)
+			propagate_rate(clkp);
 	}
 }
 
@@ -278,8 +278,12 @@ void recalculate_root_clocks(void)
 	struct clk *clkp;
 
 	list_for_each_entry(clkp, &clocks, node) {
-		if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
-			clkp->recalc(clkp);
+		if (!clkp->parent) {
+			if (clkp->recalc)
+				clkp->recalc(clkp);
+			if (clkp->flags & RATE_PROPAGATES)
+				propagate_rate(clkp);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From d5e6072b753041b56236b014ccfd72a0d3177e08 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 8 Feb 2009 16:07:46 +0000
Subject: [ARM] omap: handle RATE_CKCTL via .set_rate/.round_rate methods

It makes no sense to have the CKCTL rate selection implemented as a flag
and a special exception in the top level set_rate/round_rate methods.
Provide CKCTL set_rate/round_rate methods, and use these for where ever
RATE_CKCTL is used and they're not already overridden.  This allows us
to remove the RATE_CKCTL flag.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             | 96 ++++++++++++++++-----------------
 arch/arm/mach-omap1/clock.h             | 38 ++++++++-----
 arch/arm/plat-omap/include/mach/clock.h |  2 +-
 3 files changed, 72 insertions(+), 64 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index be500014dcb..6b17da120e5 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -216,9 +216,6 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	struct clk * parent;
 	unsigned  dsor_exp;
 
-	if (unlikely(!(clk->flags & RATE_CKCTL)))
-		return -EINVAL;
-
 	parent = clk->parent;
 	if (unlikely(parent == NULL))
 		return -EIO;
@@ -307,26 +304,52 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 
 static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 {
-	int  ret = -EINVAL;
-	int  dsor_exp;
-	__u16  regval;
-
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp > 3)
-			dsor_exp = -EINVAL;
-		if (dsor_exp < 0)
-			return dsor_exp;
-
-		regval = __raw_readw(DSP_CKCTL);
-		regval &= ~(3 << clk->rate_offset);
-		regval |= dsor_exp << clk->rate_offset;
-		__raw_writew(regval, DSP_CKCTL);
-		clk->rate = clk->parent->rate / (1 << dsor_exp);
-		ret = 0;
-	}
+	int dsor_exp;
+	u16 regval;
 
-	return ret;
+	dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp > 3)
+		dsor_exp = -EINVAL;
+	if (dsor_exp < 0)
+		return dsor_exp;
+
+	regval = __raw_readw(DSP_CKCTL);
+	regval &= ~(3 << clk->rate_offset);
+	regval |= dsor_exp << clk->rate_offset;
+	__raw_writew(regval, DSP_CKCTL);
+	clk->rate = clk->parent->rate / (1 << dsor_exp);
+
+	return 0;
+}
+
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp < 0)
+		return dsor_exp;
+	if (dsor_exp > 3)
+		dsor_exp = 3;
+	return clk->parent->rate / (1 << dsor_exp);
+}
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+	u16 regval;
+
+	dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp > 3)
+		dsor_exp = -EINVAL;
+	if (dsor_exp < 0)
+		return dsor_exp;
+
+	regval = omap_readw(ARM_CKCTL);
+	regval &= ~(3 << clk->rate_offset);
+	regval |= dsor_exp << clk->rate_offset;
+	regval = verify_ckctl_value(regval);
+	omap_writew(regval, ARM_CKCTL);
+	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	return 0;
 }
 
 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
@@ -572,20 +595,9 @@ static const struct clkops clkops_generic = {
 
 static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	int dsor_exp;
-
 	if (clk->flags & RATE_FIXED)
 		return clk->rate;
 
-	if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp < 0)
-			return dsor_exp;
-		if (dsor_exp > 3)
-			dsor_exp = 3;
-		return clk->parent->rate / (1 << dsor_exp);
-	}
-
 	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
@@ -595,27 +607,9 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int  ret = -EINVAL;
-	int  dsor_exp;
-	__u16  regval;
 
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
-	else if (clk->flags & RATE_CKCTL) {
-		dsor_exp = calc_dsor_exp(clk, rate);
-		if (dsor_exp > 3)
-			dsor_exp = -EINVAL;
-		if (dsor_exp < 0)
-			return dsor_exp;
-
-		regval = omap_readw(ARM_CKCTL);
-		regval &= ~(3 << clk->rate_offset);
-		regval |= dsor_exp << clk->rate_offset;
-		regval = verify_ckctl_value(regval);
-		omap_writew(regval, ARM_CKCTL);
-		clk->rate = clk->parent->rate / (1 << dsor_exp);
-		ret = 0;
-	}
-
 	return ret;
 }
 
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 8673832d829..aa7b3d604ee 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -27,6 +27,9 @@ static void omap1_init_ext_clk(struct clk * clk);
 static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
 static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
 
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+
 struct mpu_rate {
 	unsigned long		rate;
 	unsigned long		xtal;
@@ -189,9 +192,11 @@ static struct clk arm_ck = {
 	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES,
+			  CLOCK_IN_OMAP310 | RATE_PROPAGATES,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct arm_idlect1_clk armper_ck = {
@@ -200,12 +205,13 @@ static struct arm_idlect1_clk armper_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | RATE_CKCTL |
-				  CLOCK_IDLE_CONTROL,
+				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_PERCK,
 		.rate_offset	= CKCTL_PERDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
 	.idlect_shift	= 2,
 };
@@ -279,22 +285,24 @@ static struct clk dsp_ck = {
 	.name		= "dsp_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_CKCTL,
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
 	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL,
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct clk dspper_ck = {
@@ -302,11 +310,12 @@ static struct clk dspper_ck = {
 	.ops		= &clkops_dspck,
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
+			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
 	.set_rate	= &omap1_clk_set_rate_dsp_domain,
 };
 
@@ -340,10 +349,11 @@ static struct arm_idlect1_clk tc_ck = {
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 				  CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
-				  RATE_CKCTL | RATE_PROPAGATES |
-				  CLOCK_IDLE_CONTROL,
+				  RATE_PROPAGATES | CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
 	.idlect_shift	= 6,
 };
@@ -466,11 +476,13 @@ static struct clk lcd_ck_16xx = {
 	.name		= "lcd_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730,
 	.enable_reg	= (void __iomem *)ARM_IDLECT2,
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
 static struct arm_idlect1_clk lcd_ck_1510 = {
@@ -479,11 +491,13 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-				  RATE_CKCTL | CLOCK_IDLE_CONTROL,
+				  CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_LCDCK,
 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
 	.idlect_shift	= 3,
 };
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 06dd38a8a0c..5a7411e71f2 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -124,7 +124,7 @@ extern void clk_enable_init_clocks(void);
 extern const struct clkops clkops_null;
 
 /* Clock flags */
-#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+/* bit 0 is free */
 #define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
 #define RATE_PROPAGATES		(1 << 2)	/* Program children too */
 /* bits 3-4 are free */
-- 
cgit v1.2.3


From 1e98ffa85e70f423e2e41156cc3d549c353cd897 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 18:56:17 +0000
Subject: [ARM] omap: ensure devname is set for dummy devices

This is needed to use these with the clkdev helpers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/devices.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index ce03fa75077..97304044152 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -348,6 +348,7 @@ static void __init omap_hsmmc_reset(void)
 		}
 
 		dummy_pdev.id = i;
+		dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
 		iclk = clk_get(dev, "mmchs_ick");
 		if (iclk && clk_enable(iclk))
 			iclk = NULL;
-- 
cgit v1.2.3


From dbb674d57b5851a4fe3122ff4280e4cf87209198 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 22 Jan 2009 16:08:04 +0000
Subject: [ARM] omap: allow double-registering of clocks

This stops things blowing up if a 'struct clk' to be passed more
than once to clk_register(), which will be required when we decouple
struct clk's from their names.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/clock.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index df58f5d9a5a..6b3ef2a0b04 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -292,6 +292,12 @@ int clk_register(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	/*
+	 * trap out already registered clocks
+	 */
+	if (clk->node.next || clk->node.prev)
+		return 0;
+
 	mutex_lock(&clocks_mutex);
 	list_add(&clk->node, &clocks);
 	if (clk->init)
-- 
cgit v1.2.3


From d7e8f1f9d655af2c7ea90738bf567aa6990159b3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 18 Jan 2009 23:03:15 +0000
Subject: [ARM] omap: convert OMAP1 to use clkdev

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c              | 117 +++++++++++++++++-----
 arch/arm/mach-omap1/clock.h              | 164 ++++++-------------------------
 arch/arm/plat-omap/Kconfig               |   1 +
 arch/arm/plat-omap/clock.c               |   4 +
 arch/arm/plat-omap/include/mach/clkdev.h |  13 +++
 arch/arm/plat-omap/include/mach/clock.h  |   6 +-
 6 files changed, 145 insertions(+), 160 deletions(-)
 create mode 100644 arch/arm/plat-omap/include/mach/clkdev.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 6b17da120e5..829b9b845b8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
+#include <asm/clkdev.h>
 
 #include <mach/cpu.h>
 #include <mach/usb.h>
@@ -32,6 +33,83 @@ static const struct clkops clkops_dspck;
 
 #include "clock.h"
 
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_310	(1 << 0)
+#define CK_730	(1 << 1)
+#define CK_1510	(1 << 2)
+#define CK_16XX	(1 << 3)
+
+static struct omap_clk omap_clks[] = {
+	/* non-ULPD clocks */
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN1 clocks */
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armwdt_ck",	&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	/* CK_GEN2 clocks */
+	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN3 clocks */
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_730),
+	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_730),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	/* ULPD clocks */
+	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
+	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
+	CLK("mmci-omap.0", "mmc_ck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.1", "mmc_ck",	&mmc2_ck,	CK_16XX),
+	/* Virtual clocks */
+	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "i2c_fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "i2c_ick",	&i2c_ick,	CK_16XX),
+};
+
 static int omap1_clk_enable_generic(struct clk * clk);
 static int omap1_clk_enable(struct clk *clk);
 static void omap1_clk_disable_generic(struct clk * clk);
@@ -677,10 +755,10 @@ static struct clk_functions omap1_clk_functions = {
 
 int __init omap1_clk_init(void)
 {
-	struct clk ** clkp;
+	struct omap_clk *c;
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
-	u32 reg;
+	u32 reg, cpu_mask;
 
 #ifdef CONFIG_DEBUG_LL
 	/* Resets some clocks that may be left on from bootloader,
@@ -700,27 +778,21 @@ int __init omap1_clk_init(void)
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 
-	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
-		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
-			clk_register(*clkp);
-			continue;
+	cpu_mask = 0;
+	if (cpu_is_omap16xx())
+		cpu_mask |= CK_16XX;
+	if (cpu_is_omap1510())
+		cpu_mask |= CK_1510;
+	if (cpu_is_omap730())
+		cpu_mask |= CK_730;
+	if (cpu_is_omap310())
+		cpu_mask |= CK_310;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
 		}
-	}
 
 	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
 	if (info != NULL) {
@@ -831,4 +903,3 @@ int __init omap1_clk_init(void)
 
 	return 0;
 }
-
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index aa7b3d604ee..ed343af5f12 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -149,16 +149,13 @@ static struct clk ck_ref = {
 	.name		= "ck_ref",
 	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310,
 };
 
 static struct clk ck_dpll1 = {
 	.name		= "ck_dpll1",
 	.ops		= &clkops_null,
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 };
 
 static struct arm_idlect1_clk ck_dpll1out = {
@@ -166,7 +163,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
 		.name		= "ck_dpll1out",
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
+		.flags		= CLOCK_IDLE_CONTROL |
 				  ENABLE_REG_32BIT | RATE_PROPAGATES,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_CKOUT_ARM,
@@ -179,8 +176,7 @@ static struct clk sossi_ck = {
 	.name		= "ck_sossi",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1out.clk,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
-			  ENABLE_REG_32BIT,
+	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_1,
 	.enable_bit	= 16,
 	.recalc		= &omap1_sossi_recalc,
@@ -191,8 +187,7 @@ static struct clk arm_ck = {
 	.name		= "arm_ck",
 	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
@@ -204,8 +199,7 @@ static struct arm_idlect1_clk armper_ck = {
 		.name		= "armper_ck",
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_PERCK,
 		.rate_offset	= CKCTL_PERDIV_OFFSET,
@@ -220,7 +214,6 @@ static struct clk arm_gpio_ck = {
 	.name		= "arm_gpio_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.enable_reg	= (void __iomem *)ARM_IDLECT2,
 	.enable_bit	= EN_GPIOCK,
 	.recalc		= &followparent_recalc,
@@ -231,8 +224,7 @@ static struct arm_idlect1_clk armxor_ck = {
 		.name		= "armxor_ck",
 		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
@@ -245,8 +237,7 @@ static struct arm_idlect1_clk armtim_ck = {
 		.name		= "armtim_ck",
 		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
@@ -259,8 +250,7 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.name		= "armwdt_ck",
 		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_WDTCK,
 		.recalc		= &omap1_watchdog_recalc,
@@ -272,7 +262,6 @@ static struct clk arminth_ck16xx = {
 	.name		= "arminth_ck",
 	.ops		= &clkops_null,
 	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
@@ -285,7 +274,6 @@ static struct clk dsp_ck = {
 	.name		= "dsp_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_CKCTL,
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
@@ -298,7 +286,6 @@ static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
 	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
@@ -309,8 +296,7 @@ static struct clk dspper_ck = {
 	.name		= "dspper_ck",
 	.ops		= &clkops_dspck,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_IO_ADDRESS,
+	.flags		= VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
@@ -323,8 +309,7 @@ static struct clk dspxor_ck = {
 	.name		= "dspxor_ck",
 	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_IO_ADDRESS,
+	.flags		= VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
 	.recalc		= &followparent_recalc,
@@ -334,8 +319,7 @@ static struct clk dsptim_ck = {
 	.name		= "dsptim_ck",
 	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  VIRTUAL_IO_ADDRESS,
+	.flags		= VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
 	.recalc		= &followparent_recalc,
@@ -347,9 +331,7 @@ static struct arm_idlect1_clk tc_ck = {
 		.name		= "tc_ck",
 		.ops		= &clkops_null,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
-				  RATE_PROPAGATES | CLOCK_IDLE_CONTROL,
+		.flags		= RATE_PROPAGATES | CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
@@ -362,7 +344,6 @@ static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
 	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.recalc		= &followparent_recalc,
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
@@ -375,7 +356,6 @@ static struct clk tipb_ck = {
 	.name		= "tipb_ck",
 	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
 	.recalc		= &followparent_recalc,
 };
 
@@ -384,7 +364,6 @@ static struct clk l3_ocpi_ck = {
 	.name		= "l3_ocpi_ck",
 	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_IDLECT3,
 	.enable_bit	= EN_OCPI_CK,
 	.recalc		= &followparent_recalc,
@@ -394,7 +373,6 @@ static struct clk tc1_ck = {
 	.name		= "tc1_ck",
 	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_IDLECT3,
 	.enable_bit	= EN_TC1_CK,
 	.recalc		= &followparent_recalc,
@@ -404,7 +382,6 @@ static struct clk tc2_ck = {
 	.name		= "tc2_ck",
 	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)ARM_IDLECT3,
 	.enable_bit	= EN_TC2_CK,
 	.recalc		= &followparent_recalc,
@@ -415,8 +392,6 @@ static struct clk dma_ck = {
 	.name		= "dma_ck",
 	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310,
 	.recalc		= &followparent_recalc,
 };
 
@@ -424,7 +399,6 @@ static struct clk dma_lcdfree_ck = {
 	.name		= "dma_lcdfree_ck",
 	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 };
 
@@ -433,8 +407,7 @@ static struct arm_idlect1_clk api_ck = {
 		.name		= "api_ck",
 		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-				  CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
@@ -447,8 +420,7 @@ static struct arm_idlect1_clk lb_ck = {
 		.name		= "lb_ck",
 		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-				  CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
@@ -460,7 +432,6 @@ static struct clk rhea1_ck = {
 	.name		= "rhea1_ck",
 	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 };
 
@@ -468,7 +439,6 @@ static struct clk rhea2_ck = {
 	.name		= "rhea2_ck",
 	.ops		= &clkops_null,
 	.parent		= &tc_ck.clk,
-	.flags		= CLOCK_IN_OMAP16XX,
 	.recalc		= &followparent_recalc,
 };
 
@@ -476,7 +446,6 @@ static struct clk lcd_ck_16xx = {
 	.name		= "lcd_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730,
 	.enable_reg	= (void __iomem *)ARM_IDLECT2,
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
@@ -490,8 +459,7 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.name		= "lcd_ck",
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-				  CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_LCDCK,
 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
@@ -508,8 +476,7 @@ static struct clk uart1_1510 = {
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -523,8 +490,8 @@ static struct uart_clk uart1_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
-				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 		.enable_bit	= 29,
 	},
@@ -537,9 +504,7 @@ static struct clk uart2_ck = {
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
-			  CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -552,8 +517,7 @@ static struct clk uart3_1510 = {
 	/* Direct from ULPD, no real parent */
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
@@ -567,8 +531,8 @@ static struct uart_clk uart3_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED |
-				  ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 		.enable_bit	= 31,
 	},
@@ -580,8 +544,7 @@ static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
@@ -591,8 +554,7 @@ static struct clk usb_hhc_ck1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
@@ -603,8 +565,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
 	.enable_bit	= 8 /* UHOST_EN */,
 };
@@ -614,7 +575,7 @@ static struct clk usb_dc_ck = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
+	.flags		= RATE_FIXED,
 	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
 	.enable_bit	= 4,
 };
@@ -624,7 +585,7 @@ static struct clk mclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
- 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
+	.flags		= RATE_FIXED,
  	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
  	.enable_bit	= 6,
 };
@@ -633,7 +594,6 @@ static struct clk mclk_16xx = {
 	.name		= "mclk",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
 	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
@@ -646,14 +606,13 @@ static struct clk bclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk bclk_16xx = {
 	.name		= "bclk",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.flags		= CLOCK_IN_OMAP16XX,
 	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
 	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
@@ -667,9 +626,7 @@ static struct clk mmc1_ck = {
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
-			  CLOCK_NO_IDLE_PARENT,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 23,
 };
@@ -681,8 +638,7 @@ static struct clk mmc2_ck = {
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
 	.enable_bit	= 20,
 };
@@ -690,8 +646,6 @@ static struct clk mmc2_ck = {
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_IN_OMAP310,
 	.parent		= &arm_ck, /* Is smarter alias for */
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
@@ -704,8 +658,7 @@ static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  CLOCK_NO_IDLE_PARENT,
+	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armxor_ck.clk,
 	.recalc		= &followparent_recalc,
 };
@@ -714,62 +667,9 @@ static struct clk i2c_ick = {
 	.name		= "i2c_ick",
 	.id		= 1,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT,
+	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armper_ck.clk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk * onchip_clks[] = {
-	/* non-ULPD clocks */
-	&ck_ref,
-	&ck_dpll1,
-	/* CK_GEN1 clocks */
-	&ck_dpll1out.clk,
-	&sossi_ck,
-	&arm_ck,
-	&armper_ck.clk,
-	&arm_gpio_ck,
-	&armxor_ck.clk,
-	&armtim_ck.clk,
-	&armwdt_ck.clk,
-	&arminth_ck1510,  &arminth_ck16xx,
-	/* CK_GEN2 clocks */
-	&dsp_ck,
-	&dspmmu_ck,
-	&dspper_ck,
-	&dspxor_ck,
-	&dsptim_ck,
-	/* CK_GEN3 clocks */
-	&tc_ck.clk,
-	&tipb_ck,
-	&l3_ocpi_ck,
-	&tc1_ck,
-	&tc2_ck,
-	&dma_ck,
-	&dma_lcdfree_ck,
-	&api_ck.clk,
-	&lb_ck.clk,
-	&rhea1_ck,
-	&rhea2_ck,
-	&lcd_ck_16xx,
-	&lcd_ck_1510.clk,
-	/* ULPD clocks */
-	&uart1_1510,
-	&uart1_16xx.clk,
-	&uart2_ck,
-	&uart3_1510,
-	&uart3_16xx.clk,
-	&usb_clko,
-	&usb_hhc_ck1510, &usb_hhc_ck16xx,
-	&usb_dc_ck,
-	&mclk_1510,  &mclk_16xx,
-	&bclk_1510,  &bclk_16xx,
-	&mmc1_ck,
-	&mmc2_ck,
-	/* Virtual clocks */
-	&virtual_ck_mpu,
-	&i2c_fck,
-	&i2c_ick,
-};
-
 #endif
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 46d3b0b9ce6..fc7b6831f3e 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,6 +11,7 @@ choice
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
+	select COMMON_CLKDEV
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 6b3ef2a0b04..6b88f7878a5 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,6 +36,7 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+#ifndef CONFIG_COMMON_CLKDEV
 /*
  * Returns a clock. Note that we first try to use device id on the bus
  * and clock name. If this fails, we try to use clock name only.
@@ -72,6 +73,7 @@ found:
 	return clk;
 }
 EXPORT_SYMBOL(clk_get);
+#endif
 
 int clk_enable(struct clk *clk)
 {
@@ -145,10 +147,12 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+#ifndef CONFIG_COMMON_CLKDEV
 void clk_put(struct clk *clk)
 {
 }
 EXPORT_SYMBOL(clk_put);
+#endif
 
 /*-------------------------------------------------------------------------
  * Optional clock functions defined in include/linux/clk.h
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/mach/clkdev.h
new file mode 100644
index 00000000000..730c49d1ebd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clkdev.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 5a7411e71f2..2af4bc24cfe 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -136,11 +136,7 @@ extern const struct clkops clkops_null;
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310	(1 << 21)
-#define CLOCK_IN_OMAP730	(1 << 22)
-#define CLOCK_IN_OMAP1510	(1 << 23)
-#define CLOCK_IN_OMAP16XX	(1 << 24)
+/* bits 13-24 are currently free */
 #define CLOCK_IN_OMAP242X	(1 << 25)
 #define CLOCK_IN_OMAP243X	(1 << 26)
 #define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-- 
cgit v1.2.3


From 8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 15:27:29 +0000
Subject: [ARM] omap: convert OMAP2 to use clkdev

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c         | 197 ++++++++++++++++--
 arch/arm/mach-omap2/clock24xx.h         | 353 +++-----------------------------
 arch/arm/plat-omap/Kconfig              |   1 +
 arch/arm/plat-omap/include/mach/clock.h |   4 +-
 4 files changed, 218 insertions(+), 337 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 3a0a1b8aa0b..36093ea878a 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -31,6 +31,7 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
+#include <asm/clkdev.h>
 
 #include "memory.h"
 #include "clock.h"
@@ -44,6 +45,177 @@ static const struct clkops clkops_fixed;
 
 #include "clock24xx.h"
 
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_243X	(1 << 0)
+#define CK_242X	(1 << 1)
+
+static struct omap_clk omap24xx_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
+	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
+	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
+	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
+	/* Modem domain clocks */
+	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
+	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
+	/* DSS domain clocks */
+	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick,	CK_243X),
+	CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck,	CK_243X),
+	CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick,	CK_243X),
+	CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck,	CK_243X),
+	CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick,	CK_243X),
+	CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck,	CK_243X),
+	CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick,	CK_243X),
+	CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck,	CK_243X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"mpu_wdt_ick",	&mpu_wdt_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
+	CLK(NULL,	"cam_fck",	&cam_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"mmc_ick",	&mmc_ick,	CK_242X),
+	CLK(NULL,	"mmc_fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
+	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "i2c_ick",	&i2c1_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "i2c_fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.1", "i2c_fck",	&i2chs1_fck,	CK_243X),
+	CLK("i2c_omap.2", "i2c_ick",	&i2c2_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.2", "i2c_fck",	&i2c2_fck,	CK_242X),
+	CLK("i2c_omap.2", "i2c_fck",	&i2chs2_fck,	CK_243X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
+	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"rng_ick",	&rng_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchs_ick",	&mmchs1_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchs_fck",	&mmchs1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchs_ick",	&mmchs2_ick,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchs_fck",	&mmchs2_fck,	CK_243X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
+	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
+	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
+};
+
 /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
 #define EN_APLL_STOPPED			0
 #define EN_APLL_LOCKED			3
@@ -487,8 +659,8 @@ arch_initcall(omap2_clk_arch_init);
 int __init omap2_clk_init(void)
 {
 	struct prcm_config *prcm;
-	struct clk **clkp;
-	u32 clkrate;
+	struct omap_clk *c;
+	u32 clkrate, cpu_mask;
 
 	if (cpu_is_omap242x())
 		cpu_mask = RATE_IN_242X;
@@ -502,21 +674,18 @@ int __init omap2_clk_init(void)
 	omap2_sys_clk_recalc(&sys_ck);
 	propagate_rate(&sys_ck);
 
-	for (clkp = onchip_24xx_clks;
-	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
-	     clkp++) {
+	cpu_mask = 0;
+	if (cpu_is_omap2420())
+		cpu_mask |= CK_242X;
+	if (cpu_is_omap2430())
+		cpu_mask |= CK_243X;
 
-		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
-			clk_register(*clkp);
-			continue;
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
 		}
 
-		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
-			clk_register(*clkp);
-			continue;
-		}
-	}
-
 	/* Check the MPU rate set by bootloader */
 	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index e07dcba4b3e..b2442475fb4 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -621,8 +621,7 @@ static struct clk func_32k_ck = {
 	.name		= "func_32k_ck",
 	.ops		= &clkops_null,
 	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -630,8 +629,7 @@ static struct clk func_32k_ck = {
 static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
 	.ops		= &clkops_oscck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_osc_clk_recalc,
 };
@@ -641,8 +639,7 @@ static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
 	.name		= "sys_ck",		/* ~ ref_clk also */
 	.ops		= &clkops_null,
 	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_sys_clk_recalc,
 };
@@ -651,8 +648,7 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.name		= "alt_ck",
 	.ops		= &clkops_null,
 	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -683,8 +679,7 @@ static struct clk dpll_ck = {
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,		/* Can be func_32k also */
 	.dpll_data	= &dpll_dd,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
 	.set_rate	= &omap2_reprogram_dpllcore,
@@ -695,8 +690,7 @@ static struct clk apll96_ck = {
 	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.flags		= RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
@@ -707,8 +701,7 @@ static struct clk apll54_ck = {
 	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.flags		= RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
@@ -740,8 +733,7 @@ static struct clk func_54m_ck = {
 	.name		= "func_54m_ck",
 	.ops		= &clkops_null,
 	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -754,8 +746,7 @@ static struct clk core_ck = {
 	.name		= "core_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -782,8 +773,7 @@ static struct clk func_96m_ck = {
 	.name		= "func_96m_ck",
 	.ops		= &clkops_null,
 	.parent		= &apll96_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -816,8 +806,7 @@ static struct clk func_48m_ck = {
 	.name		= "func_48m_ck",
 	.ops		= &clkops_null,
 	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -833,8 +822,7 @@ static struct clk func_12m_ck = {
 	.ops		= &clkops_null,
 	.parent		= &func_48m_ck,
 	.fixed_div	= 4,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -844,7 +832,6 @@ static struct clk wdt1_osc_ck = {
 	.name		= "ck_wdt1_osc",
 	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -888,8 +875,7 @@ static struct clk sys_clkout_src = {
 	.name		= "sys_clkout_src",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
@@ -920,7 +906,6 @@ static struct clk sys_clkout = {
 	.name		= "sys_clkout",
 	.ops		= &clkops_null,
 	.parent		= &sys_clkout_src,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
@@ -935,7 +920,7 @@ static struct clk sys_clkout2_src = {
 	.name		= "sys_clkout2_src",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
@@ -958,7 +943,6 @@ static struct clk sys_clkout2 = {
 	.name		= "sys_clkout2",
 	.ops		= &clkops_null,
 	.parent		= &sys_clkout2_src,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "wkup_clkdm",
 	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
@@ -972,7 +956,6 @@ static struct clk emul_ck = {
 	.name		= "emul_ck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
 	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
@@ -1008,9 +991,7 @@ static struct clk mpu_ck = {	/* Control cpu */
 	.name		= "mpu_ck",
 	.ops		= &clkops_null,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
 	.clkdm_name	= "mpu_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
@@ -1052,8 +1033,7 @@ static struct clk dsp_fck = {
 	.name		= "dsp_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
 	.clkdm_name	= "dsp_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -1083,8 +1063,7 @@ static struct clk dsp_irate_ick = {
 	.name		= "dsp_irate_ick",
 	.ops		= &clkops_null,
 	.parent		= &dsp_fck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
-				CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
 	.clksel		= dsp_irate_ick_clksel,
@@ -1098,7 +1077,7 @@ static struct clk dsp_ick = {
 	.name		= "dsp_ick",	 /* apparently ipi and isp */
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dsp_irate_ick,
-	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
 };
@@ -1108,7 +1087,7 @@ static struct clk iva2_1_ick = {
 	.name		= "iva2_1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dsp_irate_ick,
-	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
 };
@@ -1122,8 +1101,7 @@ static struct clk iva1_ifck = {
 	.name		= "iva1_ifck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
-				RATE_PROPAGATES | DELAYED_APP,
+	.flags		= CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
 	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
@@ -1140,7 +1118,6 @@ static struct clk iva1_mpu_int_ifck = {
 	.name		= "iva1_mpu_int_ifck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &iva1_ifck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
@@ -1187,9 +1164,7 @@ static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
 	.name		= "core_l3_ck",
 	.ops		= &clkops_null,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
@@ -1217,8 +1192,7 @@ static struct clk usb_l4_ick = {	/* FS-USB interface clock */
 	.name		= "usb_l4_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
@@ -1252,8 +1226,7 @@ static struct clk l4_ck = {		/* used both as an ick and fck */
 	.name		= "l4_ck",
 	.ops		= &clkops_null,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
@@ -1291,8 +1264,7 @@ static struct clk ssi_ssr_sst_fck = {
 	.name		= "ssi_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
@@ -1328,7 +1300,6 @@ static struct clk gfx_3d_fck = {
 	.name		= "gfx_3d_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
@@ -1344,7 +1315,6 @@ static struct clk gfx_2d_fck = {
 	.name		= "gfx_2d_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
@@ -1360,7 +1330,6 @@ static struct clk gfx_ick = {
 	.name		= "gfx_ick",		/* From l3 */
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "gfx_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
@@ -1391,7 +1360,7 @@ static struct clk mdm_ick = {		/* used both as a ick and fck */
 	.name		= "mdm_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "mdm_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
@@ -1407,7 +1376,6 @@ static struct clk mdm_osc_ck = {
 	.name		= "mdm_osc_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "mdm_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
@@ -1453,7 +1421,6 @@ static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
@@ -1464,8 +1431,7 @@ static struct clk dss1_fck = {
 	.name		= "dss1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_ck,		/* Core or sys */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
@@ -1498,8 +1464,7 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.name		= "dss2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
@@ -1514,7 +1479,6 @@ static struct clk dss_54m_fck = {	/* Alt clk used in power management */
 	.name		= "dss_54m_fck",	/* 54m tv clk */
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "dss_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
@@ -1543,7 +1507,6 @@ static struct clk gpt1_ick = {
 	.name		= "gpt1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
@@ -1554,7 +1517,6 @@ static struct clk gpt1_fck = {
 	.name		= "gpt1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
@@ -1571,7 +1533,6 @@ static struct clk gpt2_ick = {
 	.name		= "gpt2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
@@ -1582,7 +1543,6 @@ static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
@@ -1597,7 +1557,6 @@ static struct clk gpt3_ick = {
 	.name		= "gpt3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
@@ -1608,7 +1567,6 @@ static struct clk gpt3_fck = {
 	.name		= "gpt3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
@@ -1623,7 +1581,6 @@ static struct clk gpt4_ick = {
 	.name		= "gpt4_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
@@ -1634,7 +1591,6 @@ static struct clk gpt4_fck = {
 	.name		= "gpt4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
@@ -1649,7 +1605,6 @@ static struct clk gpt5_ick = {
 	.name		= "gpt5_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
@@ -1660,7 +1615,6 @@ static struct clk gpt5_fck = {
 	.name		= "gpt5_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
@@ -1675,7 +1629,6 @@ static struct clk gpt6_ick = {
 	.name		= "gpt6_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
@@ -1686,7 +1639,6 @@ static struct clk gpt6_fck = {
 	.name		= "gpt6_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
@@ -1701,7 +1653,6 @@ static struct clk gpt7_ick = {
 	.name		= "gpt7_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1711,7 +1662,6 @@ static struct clk gpt7_fck = {
 	.name		= "gpt7_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
@@ -1726,7 +1676,6 @@ static struct clk gpt8_ick = {
 	.name		= "gpt8_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
@@ -1737,7 +1686,6 @@ static struct clk gpt8_fck = {
 	.name		= "gpt8_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
@@ -1752,7 +1700,6 @@ static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
@@ -1763,7 +1710,6 @@ static struct clk gpt9_fck = {
 	.name		= "gpt9_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
@@ -1778,7 +1724,6 @@ static struct clk gpt10_ick = {
 	.name		= "gpt10_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
@@ -1789,7 +1734,6 @@ static struct clk gpt10_fck = {
 	.name		= "gpt10_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
@@ -1804,7 +1748,6 @@ static struct clk gpt11_ick = {
 	.name		= "gpt11_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
@@ -1815,7 +1758,6 @@ static struct clk gpt11_fck = {
 	.name		= "gpt11_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
@@ -1830,7 +1772,6 @@ static struct clk gpt12_ick = {
 	.name		= "gpt12_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
@@ -1841,7 +1782,6 @@ static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
@@ -1857,7 +1797,6 @@ static struct clk mcbsp1_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
@@ -1869,7 +1808,6 @@ static struct clk mcbsp1_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
@@ -1881,7 +1819,6 @@ static struct clk mcbsp2_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
@@ -1893,7 +1830,6 @@ static struct clk mcbsp2_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
@@ -1905,7 +1841,6 @@ static struct clk mcbsp3_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
@@ -1917,7 +1852,6 @@ static struct clk mcbsp3_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
@@ -1929,7 +1863,6 @@ static struct clk mcbsp4_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
@@ -1941,7 +1874,6 @@ static struct clk mcbsp4_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 4,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
@@ -1953,7 +1885,6 @@ static struct clk mcbsp5_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
@@ -1965,7 +1896,6 @@ static struct clk mcbsp5_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 5,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
@@ -1978,7 +1908,6 @@ static struct clk mcspi1_ick = {
 	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1989,7 +1918,6 @@ static struct clk mcspi1_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
@@ -2001,7 +1929,6 @@ static struct clk mcspi2_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
@@ -2013,7 +1940,6 @@ static struct clk mcspi2_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
@@ -2025,7 +1951,6 @@ static struct clk mcspi3_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
@@ -2037,7 +1962,6 @@ static struct clk mcspi3_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 3,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
@@ -2048,7 +1972,6 @@ static struct clk uart1_ick = {
 	.name		= "uart1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
@@ -2059,7 +1982,6 @@ static struct clk uart1_fck = {
 	.name		= "uart1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
@@ -2070,7 +1992,6 @@ static struct clk uart2_ick = {
 	.name		= "uart2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
@@ -2081,7 +2002,6 @@ static struct clk uart2_fck = {
 	.name		= "uart2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
@@ -2092,7 +2012,6 @@ static struct clk uart3_ick = {
 	.name		= "uart3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
@@ -2103,7 +2022,6 @@ static struct clk uart3_fck = {
 	.name		= "uart3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
@@ -2114,7 +2032,6 @@ static struct clk gpios_ick = {
 	.name		= "gpios_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
@@ -2125,7 +2042,6 @@ static struct clk gpios_fck = {
 	.name		= "gpios_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
@@ -2136,7 +2052,6 @@ static struct clk mpu_wdt_ick = {
 	.name		= "mpu_wdt_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
@@ -2147,7 +2062,6 @@ static struct clk mpu_wdt_fck = {
 	.name		= "mpu_wdt_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
@@ -2158,8 +2072,7 @@ static struct clk sync_32k_ick = {
 	.name		= "sync_32k_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
@@ -2170,7 +2083,6 @@ static struct clk wdt1_ick = {
 	.name		= "wdt1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
@@ -2181,8 +2093,7 @@ static struct clk omapctrl_ick = {
 	.name		= "omapctrl_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
@@ -2193,7 +2104,6 @@ static struct clk icr_ick = {
 	.name		= "icr_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
@@ -2204,7 +2114,6 @@ static struct clk cam_ick = {
 	.name		= "cam_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
@@ -2220,7 +2129,6 @@ static struct clk cam_fck = {
 	.name		= "cam_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
@@ -2231,7 +2139,6 @@ static struct clk mailboxes_ick = {
 	.name		= "mailboxes_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
@@ -2242,7 +2149,6 @@ static struct clk wdt4_ick = {
 	.name		= "wdt4_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
@@ -2253,7 +2159,6 @@ static struct clk wdt4_fck = {
 	.name		= "wdt4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
@@ -2264,7 +2169,6 @@ static struct clk wdt3_ick = {
 	.name		= "wdt3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
@@ -2275,7 +2179,6 @@ static struct clk wdt3_fck = {
 	.name		= "wdt3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
@@ -2286,7 +2189,6 @@ static struct clk mspro_ick = {
 	.name		= "mspro_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
@@ -2297,7 +2199,6 @@ static struct clk mspro_fck = {
 	.name		= "mspro_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
@@ -2308,7 +2209,6 @@ static struct clk mmc_ick = {
 	.name		= "mmc_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
@@ -2319,7 +2219,6 @@ static struct clk mmc_fck = {
 	.name		= "mmc_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
@@ -2330,7 +2229,6 @@ static struct clk fac_ick = {
 	.name		= "fac_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
@@ -2341,7 +2239,6 @@ static struct clk fac_fck = {
 	.name		= "fac_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
@@ -2352,7 +2249,6 @@ static struct clk eac_ick = {
 	.name		= "eac_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
@@ -2363,7 +2259,6 @@ static struct clk eac_fck = {
 	.name		= "eac_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
@@ -2374,7 +2269,6 @@ static struct clk hdq_ick = {
 	.name		= "hdq_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
@@ -2385,7 +2279,6 @@ static struct clk hdq_fck = {
 	.name		= "hdq_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
@@ -2397,7 +2290,6 @@ static struct clk i2c2_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
@@ -2409,7 +2301,6 @@ static struct clk i2c2_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
@@ -2421,7 +2312,6 @@ static struct clk i2chs2_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
@@ -2433,7 +2323,6 @@ static struct clk i2c1_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
@@ -2445,7 +2334,6 @@ static struct clk i2c1_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
@@ -2457,7 +2345,6 @@ static struct clk i2chs1_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
@@ -2468,8 +2355,7 @@ static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
 	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2478,7 +2364,6 @@ static struct clk sdma_fck = {
 	.name		= "sdma_fck",
 	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2487,7 +2372,6 @@ static struct clk sdma_ick = {
 	.name		= "sdma_ick",
 	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2496,7 +2380,6 @@ static struct clk vlynq_ick = {
 	.name		= "vlynq_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
@@ -2532,7 +2415,7 @@ static struct clk vlynq_fck = {
 	.name		= "vlynq_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
@@ -2549,7 +2432,7 @@ static struct clk sdrc_ick = {
 	.name		= "sdrc_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
@@ -2560,7 +2443,6 @@ static struct clk des_ick = {
 	.name		= "des_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
@@ -2571,7 +2453,6 @@ static struct clk sha_ick = {
 	.name		= "sha_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
@@ -2582,7 +2463,6 @@ static struct clk rng_ick = {
 	.name		= "rng_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
@@ -2593,7 +2473,6 @@ static struct clk aes_ick = {
 	.name		= "aes_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
@@ -2604,7 +2483,6 @@ static struct clk pka_ick = {
 	.name		= "pka_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
 	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
@@ -2615,7 +2493,6 @@ static struct clk usb_fck = {
 	.name		= "usb_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
@@ -2626,7 +2503,6 @@ static struct clk usbhs_ick = {
 	.name		= "usbhs_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
@@ -2637,7 +2513,6 @@ static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
@@ -2648,7 +2523,6 @@ static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
@@ -2660,7 +2534,6 @@ static struct clk mmchs2_ick = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
@@ -2672,7 +2545,6 @@ static struct clk mmchs2_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2682,7 +2554,6 @@ static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
@@ -2693,7 +2564,6 @@ static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
@@ -2704,7 +2574,6 @@ static struct clk mdm_intc_ick = {
 	.name		= "mdm_intc_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
@@ -2715,7 +2584,6 @@ static struct clk mmchsdb1_fck = {
 	.name		= "mmchsdb_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
@@ -2727,7 +2595,6 @@ static struct clk mmchsdb2_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.id		= 1,
 	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
@@ -2751,166 +2618,12 @@ static struct clk mmchsdb2_fck = {
 static struct clk virt_prcm_set = {
 	.name		= "virt_prcm_set",
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				DELAYED_APP,
+	.flags		= DELAYED_APP,
 	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
 	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
 	.set_rate	= &omap2_select_table_rate,
 	.round_rate	= &omap2_round_to_table_rate,
 };
 
-static struct clk *onchip_24xx_clks[] __initdata = {
-	/* external root sources */
-	&func_32k_ck,
-	&osc_ck,
-	&sys_ck,
-	&alt_ck,
-	/* internal analog sources */
-	&dpll_ck,
-	&apll96_ck,
-	&apll54_ck,
-	/* internal prcm root sources */
-	&func_54m_ck,
-	&core_ck,
-	&func_96m_ck,
-	&func_48m_ck,
-	&func_12m_ck,
-	&wdt1_osc_ck,
-	&sys_clkout_src,
-	&sys_clkout,
-	&sys_clkout2_src,
-	&sys_clkout2,
-	&emul_ck,
-	/* mpu domain clocks */
-	&mpu_ck,
-	/* dsp domain clocks */
-	&dsp_fck,
-	&dsp_irate_ick,
-	&dsp_ick,		/* 242x */
-	&iva2_1_ick,		/* 243x */
-	&iva1_ifck,		/* 242x */
-	&iva1_mpu_int_ifck,	/* 242x */
-	/* GFX domain clocks */
-	&gfx_3d_fck,
-	&gfx_2d_fck,
-	&gfx_ick,
-	/* Modem domain clocks */
-	&mdm_ick,
-	&mdm_osc_ck,
-	/* DSS domain clocks */
-	&dss_ick,
-	&dss1_fck,
-	&dss2_fck,
-	&dss_54m_fck,
-	/* L3 domain clocks */
-	&core_l3_ck,
-	&ssi_ssr_sst_fck,
-	&usb_l4_ick,
-	/* L4 domain clocks */
-	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	/* virtual meta-group clock */
-	&virt_prcm_set,
-	/* general l4 interface ck, multi-parent functional clk */
-	&gpt1_ick,
-	&gpt1_fck,
-	&gpt2_ick,
-	&gpt2_fck,
-	&gpt3_ick,
-	&gpt3_fck,
-	&gpt4_ick,
-	&gpt4_fck,
-	&gpt5_ick,
-	&gpt5_fck,
-	&gpt6_ick,
-	&gpt6_fck,
-	&gpt7_ick,
-	&gpt7_fck,
-	&gpt8_ick,
-	&gpt8_fck,
-	&gpt9_ick,
-	&gpt9_fck,
-	&gpt10_ick,
-	&gpt10_fck,
-	&gpt11_ick,
-	&gpt11_fck,
-	&gpt12_ick,
-	&gpt12_fck,
-	&mcbsp1_ick,
-	&mcbsp1_fck,
-	&mcbsp2_ick,
-	&mcbsp2_fck,
-	&mcbsp3_ick,
-	&mcbsp3_fck,
-	&mcbsp4_ick,
-	&mcbsp4_fck,
-	&mcbsp5_ick,
-	&mcbsp5_fck,
-	&mcspi1_ick,
-	&mcspi1_fck,
-	&mcspi2_ick,
-	&mcspi2_fck,
-	&mcspi3_ick,
-	&mcspi3_fck,
-	&uart1_ick,
-	&uart1_fck,
-	&uart2_ick,
-	&uart2_fck,
-	&uart3_ick,
-	&uart3_fck,
-	&gpios_ick,
-	&gpios_fck,
-	&mpu_wdt_ick,
-	&mpu_wdt_fck,
-	&sync_32k_ick,
-	&wdt1_ick,
-	&omapctrl_ick,
-	&icr_ick,
-	&cam_fck,
-	&cam_ick,
-	&mailboxes_ick,
-	&wdt4_ick,
-	&wdt4_fck,
-	&wdt3_ick,
-	&wdt3_fck,
-	&mspro_ick,
-	&mspro_fck,
-	&mmc_ick,
-	&mmc_fck,
-	&fac_ick,
-	&fac_fck,
-	&eac_ick,
-	&eac_fck,
-	&hdq_ick,
-	&hdq_fck,
-	&i2c1_ick,
-	&i2c1_fck,
-	&i2chs1_fck,
-	&i2c2_ick,
-	&i2c2_fck,
-	&i2chs2_fck,
-	&gpmc_fck,
-	&sdma_fck,
-	&sdma_ick,
-	&vlynq_ick,
-	&vlynq_fck,
-	&sdrc_ick,
-	&des_ick,
-	&sha_ick,
-	&rng_ick,
-	&aes_ick,
-	&pka_ick,
-	&usb_fck,
-	&usbhs_ick,
-	&mmchs1_ick,
-	&mmchs1_fck,
-	&mmchs2_ick,
-	&mmchs2_fck,
-	&gpio5_ick,
-	&gpio5_fck,
-	&mdm_intc_ick,
-	&mmchsdb1_fck,
-	&mmchsdb2_fck,
-};
-
 #endif
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index fc7b6831f3e..90372131055 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -16,6 +16,7 @@ config ARCH_OMAP1
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	select CPU_V6
+	select COMMON_CLKDEV
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 2af4bc24cfe..214dc46d6ad 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -136,9 +136,7 @@ extern const struct clkops clkops_null;
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-24 are currently free */
-#define CLOCK_IN_OMAP242X	(1 << 25)
-#define CLOCK_IN_OMAP243X	(1 << 26)
+/* bits 13-26 are currently free */
 #define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
 #define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
 #define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
-- 
cgit v1.2.3


From 44dc9d027f1cb56625b1011d8725d2ab614c04e6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 15:51:11 +0000
Subject: [ARM] omap: convert OMAP3 to use clkdev

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c         | 268 +++++++++++++++--
 arch/arm/mach-omap2/clock34xx.h         | 513 ++++++--------------------------
 arch/arm/plat-omap/Kconfig              |   1 +
 arch/arm/plat-omap/include/mach/clock.h |   5 +-
 4 files changed, 331 insertions(+), 456 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 52698fb4fd0..2c22750016c 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -30,6 +30,7 @@
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
+#include <asm/clkdev.h>
 
 #include "memory.h"
 #include "clock.h"
@@ -42,6 +43,240 @@ static const struct clkops clkops_noncore_dpll_ops;
 
 #include "clock34xx.h"
 
+struct omap_clk {
+	u32		cpu;
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+#define CK_343X		(1 << 0)
+#define CK_3430ES1	(1 << 1)
+#define CK_3430ES2	(1 << 2)
+
+static struct omap_clk omap34xx_clks[] = {
+	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
+	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
+	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
+	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
+	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
+	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
+	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
+	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
+	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
+	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
+	CLK(NULL,	"virt_omap_54m_fck", &virt_omap_54m_fck, CK_343X),
+	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
+	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
+	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
+	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
+	CLK(NULL,	"omap_120m_fck", &omap_120m_fck, CK_3430ES2),
+	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
+	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
+	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
+	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
+	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
+	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
+	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
+	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
+	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
+	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
+	CLK("mmci-omap-hs.2",	"mmchs_fck",	&mmchs3_fck,	CK_3430ES2),
+	CLK("mmci-omap-hs.1",	"mmchs_fck",	&mmchs2_fck,	CK_343X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"mmchs_fck",	&mmchs1_fck,	CK_343X),
+	CLK("i2c_omap.3", "i2c_fck",	&i2c3_fck,	CK_343X),
+	CLK("i2c_omap.2", "i2c_fck",	&i2c2_fck,	CK_343X),
+	CLK("i2c_omap.1", "i2c_fck",	&i2c1_fck,	CK_343X),
+	CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck,	CK_343X),
+	CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck,	CK_343X),
+	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
+	CLK("omap2_mcspi.4", "mcspi_fck", &mcspi4_fck,	CK_343X),
+	CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck,	CK_343X),
+	CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck,	CK_343X),
+	CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck,	CK_343X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
+	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
+	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
+	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
+	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
+	CLK("mmci-omap-hs.2",	"mmchs_ick",	&mmchs3_ick,	CK_3430ES2),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
+	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"mmchs_ick",	&mmchs2_ick,	CK_343X),
+	CLK("mmci-omap-hs.0",	"mmchs_ick",	&mmchs1_ick,	CK_343X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_343X),
+	CLK("omap2_mcspi.4", "mcspi_ick", &mcspi4_ick,	CK_343X),
+	CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick,	CK_343X),
+	CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick,	CK_343X),
+	CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick,	CK_343X),
+	CLK("i2c_omap.3", "i2c_ick",	&i2c3_ick,	CK_343X),
+	CLK("i2c_omap.2", "i2c_ick",	&i2c2_ick,	CK_343X),
+	CLK("i2c_omap.1", "i2c_ick",	&i2c1_ick,	CK_343X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
+	CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick,	CK_343X),
+	CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick,	CK_343X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick,	CK_343X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
+	CLK(NULL,	"rng_ick",	&rng_ick,	CK_343X),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
+	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
+	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
+	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
+	CLK(NULL,	"usbhost_sar_fck", &usbhost_sar_fck, CK_3430ES2),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
+	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
+	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
+	CLK(NULL,	"wdt2_fck",	&wdt2_fck,	CK_343X),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK(NULL,	"wdt2_ick",	&wdt2_ick,	CK_343X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
+	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
+	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
+	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
+	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
+	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
+	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
+	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
+	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
+	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
+	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
+	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
+	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
+	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
+	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick,	CK_343X),
+	CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick,	CK_343X),
+	CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck,	CK_343X),
+	CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck,	CK_343X),
+	CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck,	CK_343X),
+	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
+	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
+	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
+	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
+	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
+	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
+	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
+};
+
 /* CM_AUTOIDLE_PLL*.AUTO_* bit values */
 #define DPLL_AUTOIDLE_DISABLE			0x0
 #define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
@@ -453,26 +688,13 @@ arch_initcall(omap2_clk_arch_init);
 int __init omap2_clk_init(void)
 {
 	/* struct prcm_config *prcm; */
-	struct clk **clkp;
+	struct omap_clk *c;
 	/* u32 clkrate; */
 	u32 cpu_clkflg;
 
-	/* REVISIT: Ultimately this will be used for multiboot */
-#if 0
-	if (cpu_is_omap242x()) {
-		cpu_mask = RATE_IN_242X;
-		cpu_clkflg = CLOCK_IN_OMAP242X;
-		clkp = onchip_24xx_clks;
-	} else if (cpu_is_omap2430()) {
-		cpu_mask = RATE_IN_243X;
-		cpu_clkflg = CLOCK_IN_OMAP243X;
-		clkp = onchip_24xx_clks;
-	}
-#endif
 	if (cpu_is_omap34xx()) {
 		cpu_mask = RATE_IN_343X;
-		cpu_clkflg = CLOCK_IN_OMAP343X;
-		clkp = onchip_34xx_clks;
+		cpu_clkflg = CK_343X;
 
 		/*
 		 * Update this if there are further clock changes between ES2
@@ -480,23 +702,21 @@ int __init omap2_clk_init(void)
 		 */
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+			cpu_clkflg |= CK_3430ES1;
 		} else {
 			cpu_mask |= RATE_IN_3430ES2;
-			cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+			cpu_clkflg |= CK_3430ES2;
 		}
 	}
 
 	clk_init(&omap2_clk_functions);
 
-	for (clkp = onchip_34xx_clks;
-	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
-	     clkp++) {
-		if ((*clkp)->flags & cpu_clkflg) {
-			clk_register(*clkp);
-			omap2_init_clk_clkdm(*clkp);
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
 		}
-	}
 
 	/* REVISIT: Not yet ready for OMAP3 */
 #if 0
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index dcacec84f8c..6bd8c6d5a4e 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -57,14 +57,14 @@ static struct clk omap_32k_fck = {
 	.name		= "omap_32k_fck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static struct clk secure_32k_fck = {
 	.name		= "secure_32k_fck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 /* Virtual source clocks for osc_sys_ck */
@@ -72,42 +72,42 @@ static struct clk virt_12m_ck = {
 	.name		= "virt_12m_ck",
 	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static struct clk virt_13m_ck = {
 	.name		= "virt_13m_ck",
 	.ops		= &clkops_null,
 	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static struct clk virt_16_8m_ck = {
 	.name		= "virt_16_8m_ck",
 	.ops		= &clkops_null,
 	.rate		= 16800000,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static struct clk virt_19_2m_ck = {
 	.name		= "virt_19_2m_ck",
 	.ops		= &clkops_null,
 	.rate		= 19200000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static struct clk virt_26m_ck = {
 	.name		= "virt_26m_ck",
 	.ops		= &clkops_null,
 	.rate		= 26000000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static struct clk virt_38_4m_ck = {
 	.name		= "virt_38_4m_ck",
 	.ops		= &clkops_null,
 	.rate		= 38400000,
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 };
 
 static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -160,7 +160,7 @@ static struct clk osc_sys_ck = {
 	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
 	.clksel		= osc_sys_clksel,
 	/* REVISIT: deal with autoextclkmode? */
-	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -185,21 +185,21 @@ static struct clk sys_ck = {
 	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
 	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
 	.clksel		= sys_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk sys_altclk = {
 	.name		= "sys_altclk",
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 };
 
 /* Optional external clock input for some McBSPs */
 static struct clk mcbsp_clks = {
 	.name		= "mcbsp_clks",
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 };
 
 /* PRM EXTERNAL CLOCK OUTPUT */
@@ -210,7 +210,6 @@ static struct clk sys_clkout1 = {
 	.parent		= &osc_sys_ck,
 	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
 	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -275,7 +274,7 @@ static struct clk dpll1_ck = {
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll1_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -288,7 +287,7 @@ static struct clk dpll1_x2_ck = {
 	.name		= "dpll1_x2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll1_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -310,7 +309,7 @@ static struct clk dpll1_x2m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll1_x2m2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -343,7 +342,7 @@ static struct clk dpll2_ck = {
 	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -366,7 +365,7 @@ static struct clk dpll2_m2_ck = {
 					  OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll2_m2x2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -396,7 +395,7 @@ static struct clk dpll3_ck = {
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll3_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -409,7 +408,7 @@ static struct clk dpll3_x2_ck = {
 	.name		= "dpll3_x2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -466,7 +465,7 @@ static struct clk dpll3_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div31_dpll3m2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -483,7 +482,7 @@ static struct clk core_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= core_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -500,7 +499,7 @@ static struct clk dpll3_m2x2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -519,7 +518,7 @@ static struct clk dpll3_m3_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
 	.clksel		= div16_dpll3_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -530,7 +529,7 @@ static struct clk dpll3_m3x2_ck = {
 	.parent		= &dpll3_m3_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -548,7 +547,7 @@ static struct clk emu_core_alwon_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -579,7 +578,7 @@ static struct clk dpll4_ck = {
 	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -593,7 +592,7 @@ static struct clk dpll4_x2_ck = {
 	.name		= "dpll4_x2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -611,7 +610,7 @@ static struct clk dpll4_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
 	.clksel_mask	= OMAP3430_DIV_96M_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -622,7 +621,7 @@ static struct clk dpll4_m2x2_ck = {
 	.parent		= &dpll4_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -640,7 +639,7 @@ static struct clk omap_96m_alwon_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= omap_96m_alwon_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -648,7 +647,7 @@ static struct clk omap_96m_fck = {
 	.name		= "omap_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -666,7 +665,7 @@ static struct clk cm_96m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= cm_96m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -679,7 +678,7 @@ static struct clk dpll4_m3_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -691,7 +690,7 @@ static struct clk dpll4_m3x2_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -709,7 +708,7 @@ static struct clk virt_omap_54m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= virt_omap_54m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -736,7 +735,7 @@ static struct clk omap_54m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_54M,
 	.clksel		= omap_54m_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -763,7 +762,7 @@ static struct clk omap_48m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_48M,
 	.clksel		= omap_48m_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -772,7 +771,7 @@ static struct clk omap_12m_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.fixed_div	= 4,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
@@ -785,7 +784,7 @@ static struct clk dpll4_m4_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -796,7 +795,7 @@ static struct clk dpll4_m4x2_ck = {
 	.parent		= &dpll4_m4_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -809,7 +808,7 @@ static struct clk dpll4_m5_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -820,7 +819,7 @@ static struct clk dpll4_m5x2_ck = {
 	.parent		= &dpll4_m5_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -833,7 +832,7 @@ static struct clk dpll4_m6_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -845,7 +844,7 @@ static struct clk dpll4_m6x2_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -853,7 +852,7 @@ static struct clk emu_per_alwon_ck = {
 	.name		= "emu_per_alwon_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_m6x2_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -885,7 +884,7 @@ static struct clk dpll5_ck = {
 	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
@@ -903,7 +902,7 @@ static struct clk dpll5_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -921,7 +920,7 @@ static struct clk omap_120m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
 	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
 	.clksel		= omap_120m_fck_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -964,7 +963,7 @@ static struct clk clkout2_src_ck = {
 	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
 	.clksel		= clkout2_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -989,7 +988,6 @@ static struct clk sys_clkout2 = {
 	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
 	.clksel		= sys_clkout2_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -999,7 +997,7 @@ static struct clk corex2_fck = {
 	.name		= "corex2_fck",
 	.ops		= &clkops_null,
 	.parent		= &dpll3_m2x2_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1022,7 +1020,7 @@ static struct clk dpll1_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1046,7 +1044,7 @@ static struct clk mpu_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= mpu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1071,7 +1069,7 @@ static struct clk arm_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1085,7 +1083,7 @@ static struct clk emu_mpu_alwon_ck = {
 	.name		= "emu_mpu_alwon_ck",
 	.ops		= &clkops_null,
 	.parent		= &mpu_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1097,7 +1095,7 @@ static struct clk dpll2_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1125,7 +1123,7 @@ static struct clk iva2_ck = {
 					  OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.clksel		= iva2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "iva2_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1140,7 +1138,7 @@ static struct clk l3_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1158,7 +1156,7 @@ static struct clk l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
 	.clksel		= div2_l3_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 
@@ -1177,7 +1175,6 @@ static struct clk rm_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
 	.clksel		= div2_l4_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1198,7 +1195,6 @@ static struct clk gfx_l3_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1210,7 +1206,7 @@ static struct clk gfx_l3_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
 	.clksel		= gfx_l3_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1219,7 +1215,6 @@ static struct clk gfx_l3_ick = {
 	.name		= "gfx_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &gfx_l3_ck,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1231,7 +1226,6 @@ static struct clk gfx_cg1_ck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1243,7 +1237,6 @@ static struct clk gfx_cg2_ck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1277,7 +1270,6 @@ static struct clk sgx_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
 	.clksel		= sgx_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1289,7 +1281,6 @@ static struct clk sgx_ick = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1303,7 +1294,6 @@ static struct clk d2d_26m_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "d2d_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1324,7 +1314,6 @@ static struct clk gpt10_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1339,7 +1328,6 @@ static struct clk gpt11_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1350,7 +1338,6 @@ static struct clk cpefuse_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1360,7 +1347,6 @@ static struct clk ts_fck = {
 	.parent		= &omap_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1370,7 +1356,6 @@ static struct clk usbtll_fck = {
 	.parent		= &omap_120m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1380,7 +1365,7 @@ static struct clk core_96m_fck = {
 	.name		= "core_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1392,7 +1377,6 @@ static struct clk mmchs3_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1404,7 +1388,6 @@ static struct clk mmchs2_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1415,7 +1398,6 @@ static struct clk mspro_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1426,7 +1408,6 @@ static struct clk mmchs1_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1438,7 +1419,6 @@ static struct clk i2c3_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1450,7 +1430,6 @@ static struct clk i2c2_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1462,7 +1441,6 @@ static struct clk i2c1_fck = {
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1497,7 +1475,6 @@ static struct clk mcbsp5_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
 	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
 	.clksel		= mcbsp_15_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1512,7 +1489,6 @@ static struct clk mcbsp1_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
 	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
 	.clksel		= mcbsp_15_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1523,7 +1499,7 @@ static struct clk core_48m_fck = {
 	.name		= "core_48m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1535,7 +1511,6 @@ static struct clk mcspi4_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1546,7 +1521,6 @@ static struct clk mcspi3_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1557,7 +1531,6 @@ static struct clk mcspi2_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1568,7 +1541,6 @@ static struct clk mcspi1_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1578,7 +1550,6 @@ static struct clk uart2_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1588,7 +1559,6 @@ static struct clk uart1_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1598,7 +1568,6 @@ static struct clk fshostusb_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1608,7 +1577,7 @@ static struct clk core_12m_fck = {
 	.name		= "core_12m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_12m_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1619,7 +1588,6 @@ static struct clk hdq_fck = {
 	.parent		= &core_12m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1649,7 +1617,7 @@ static struct clk ssi_ssr_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
 	.clksel		= ssi_ssr_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1659,7 +1627,6 @@ static struct clk ssi_sst_fck = {
 	.ops		= &clkops_null,
 	.parent		= &ssi_ssr_fck,
 	.fixed_div	= 2,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
@@ -1676,7 +1643,7 @@ static struct clk core_l3_ick = {
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1687,7 +1654,6 @@ static struct clk hsotgusb_ick = {
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1698,7 +1664,7 @@ static struct clk sdrc_ick = {
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1707,7 +1673,7 @@ static struct clk gpmc_fck = {
 	.name		= "gpmc_fck",
 	.ops		= &clkops_null,
 	.parent		= &core_l3_ick,
-	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT, /* huh? */
+	.flags		= ENABLE_ON_INIT, /* huh? */
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1718,7 +1684,7 @@ static struct clk security_l3_ick = {
 	.name		= "security_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1728,7 +1694,6 @@ static struct clk pka_ick = {
 	.parent		= &security_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1739,7 +1704,7 @@ static struct clk core_l4_ick = {
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1750,7 +1715,6 @@ static struct clk usbtll_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1762,7 +1726,6 @@ static struct clk mmchs3_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1774,7 +1737,6 @@ static struct clk icr_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1785,7 +1747,6 @@ static struct clk aes2_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1796,7 +1757,6 @@ static struct clk sha12_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1807,7 +1767,6 @@ static struct clk des2_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1819,7 +1778,6 @@ static struct clk mmchs2_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1830,7 +1788,6 @@ static struct clk mmchs1_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1841,7 +1798,6 @@ static struct clk mspro_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1852,7 +1808,6 @@ static struct clk hdq_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1864,7 +1819,6 @@ static struct clk mcspi4_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1876,7 +1830,6 @@ static struct clk mcspi3_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1888,7 +1841,6 @@ static struct clk mcspi2_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1900,7 +1852,6 @@ static struct clk mcspi1_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1912,7 +1863,6 @@ static struct clk i2c3_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1924,7 +1874,6 @@ static struct clk i2c2_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1936,7 +1885,6 @@ static struct clk i2c1_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1947,7 +1895,6 @@ static struct clk uart2_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1958,7 +1905,6 @@ static struct clk uart1_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1969,7 +1915,6 @@ static struct clk gpt11_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1980,7 +1925,6 @@ static struct clk gpt10_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1992,7 +1936,6 @@ static struct clk mcbsp5_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2004,7 +1947,6 @@ static struct clk mcbsp1_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2015,7 +1957,6 @@ static struct clk fac_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2026,7 +1967,6 @@ static struct clk mailboxes_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2037,7 +1977,7 @@ static struct clk omapctrl_ick = {
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2047,7 +1987,7 @@ static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2058,7 +1998,6 @@ static struct clk ssi_ick = {
 	.parent		= &ssi_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2081,7 +2020,6 @@ static struct clk usb_l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
 	.clksel		= usb_l4_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES1,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2093,7 +2031,7 @@ static struct clk security_l4_ick2 = {
 	.name		= "security_l4_ick2",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2103,7 +2041,6 @@ static struct clk aes1_ick = {
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2113,7 +2050,6 @@ static struct clk rng_ick = {
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2123,7 +2059,6 @@ static struct clk sha11_ick = {
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2133,7 +2068,6 @@ static struct clk des1_ick = {
 	.parent		= &security_l4_ick2,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
 	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2154,7 +2088,6 @@ static struct clk dss1_alwon_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= dss1_alwon_fck_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2166,7 +2099,6 @@ static struct clk dss_tv_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2178,7 +2110,6 @@ static struct clk dss_96m_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2190,7 +2121,6 @@ static struct clk dss2_alwon_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2203,7 +2133,6 @@ static struct clk dss_ick = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "dss_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2226,7 +2155,6 @@ static struct clk cam_mclk = {
 	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "cam_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2239,7 +2167,6 @@ static struct clk cam_ick = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "cam_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2253,7 +2180,6 @@ static struct clk usbhost_120m_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2265,7 +2191,6 @@ static struct clk usbhost_48m_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2278,7 +2203,6 @@ static struct clk usbhost_ick = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2290,7 +2214,6 @@ static struct clk usbhost_sar_fck = {
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
 	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "usbhost_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2330,7 +2253,6 @@ static struct clk usim_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
 	.clksel		= usim_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -2344,7 +2266,6 @@ static struct clk gpt1_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2354,7 +2275,7 @@ static struct clk wkup_32k_fck = {
 	.ops		= &clkops_null,
 	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2365,7 +2286,6 @@ static struct clk gpio1_dbck = {
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2376,7 +2296,6 @@ static struct clk wdt2_fck = {
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2385,7 +2304,7 @@ static struct clk wkup_l4_ick = {
 	.name		= "wkup_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2398,7 +2317,6 @@ static struct clk usim_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.flags		= CLOCK_IN_OMAP3430ES2,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2409,7 +2327,6 @@ static struct clk wdt2_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2420,7 +2337,6 @@ static struct clk wdt1_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2431,7 +2347,6 @@ static struct clk gpio1_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2442,7 +2357,6 @@ static struct clk omap_32ksync_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2454,7 +2368,6 @@ static struct clk gpt12_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2465,7 +2378,6 @@ static struct clk gpt1_ick = {
 	.parent		= &wkup_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2479,7 +2391,7 @@ static struct clk per_96m_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2489,7 +2401,7 @@ static struct clk per_48m_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2500,7 +2412,6 @@ static struct clk uart3_fck = {
 	.parent		= &per_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2514,7 +2425,6 @@ static struct clk gpt2_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2528,7 +2438,6 @@ static struct clk gpt3_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2542,7 +2451,6 @@ static struct clk gpt4_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2556,7 +2464,6 @@ static struct clk gpt5_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2570,7 +2477,6 @@ static struct clk gpt6_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2584,7 +2490,6 @@ static struct clk gpt7_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2598,7 +2503,6 @@ static struct clk gpt8_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2612,7 +2516,6 @@ static struct clk gpt9_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
 	.clksel		= omap343x_gpt_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2622,7 +2525,7 @@ static struct clk per_32k_alwon_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "per_clkdm",
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2632,7 +2535,6 @@ static struct clk gpio6_dbck = {
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2643,7 +2545,6 @@ static struct clk gpio5_dbck = {
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2654,7 +2555,6 @@ static struct clk gpio4_dbck = {
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2665,7 +2565,6 @@ static struct clk gpio3_dbck = {
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2676,7 +2575,6 @@ static struct clk gpio2_dbck = {
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2687,7 +2585,6 @@ static struct clk wdt3_fck = {
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2696,7 +2593,7 @@ static struct clk per_l4_ick = {
 	.name		= "per_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2707,7 +2604,6 @@ static struct clk gpio6_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2718,7 +2614,6 @@ static struct clk gpio5_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2729,7 +2624,6 @@ static struct clk gpio4_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2740,7 +2634,6 @@ static struct clk gpio3_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2751,7 +2644,6 @@ static struct clk gpio2_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2762,7 +2654,6 @@ static struct clk wdt3_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2773,7 +2664,6 @@ static struct clk uart3_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2784,7 +2674,6 @@ static struct clk gpt9_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2795,7 +2684,6 @@ static struct clk gpt8_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2806,7 +2694,6 @@ static struct clk gpt7_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2817,7 +2704,6 @@ static struct clk gpt6_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2828,7 +2714,6 @@ static struct clk gpt5_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2839,7 +2724,6 @@ static struct clk gpt4_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2850,7 +2734,6 @@ static struct clk gpt3_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2861,7 +2744,6 @@ static struct clk gpt2_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2873,7 +2755,6 @@ static struct clk mcbsp2_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2885,7 +2766,6 @@ static struct clk mcbsp3_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2897,7 +2777,6 @@ static struct clk mcbsp4_ick = {
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2918,7 +2797,6 @@ static struct clk mcbsp2_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
 	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2933,7 +2811,6 @@ static struct clk mcbsp3_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
 	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2948,7 +2825,6 @@ static struct clk mcbsp4_fck = {
 	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
 	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
 	.clksel		= mcbsp_234_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2997,7 +2873,7 @@ static struct clk emu_src_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3022,7 +2898,7 @@ static struct clk pclk_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
 	.clksel		= pclk_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3046,7 +2922,7 @@ static struct clk pclkx2_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
 	.clksel		= pclkx2_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3063,7 +2939,7 @@ static struct clk atclk_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
 	.clksel		= atclk_emu_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3075,7 +2951,7 @@ static struct clk traceclk_src_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3099,7 +2975,6 @@ static struct clk traceclk_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
 	.clksel		= traceclk_clksel,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3113,7 +2988,7 @@ static struct clk sr1_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -3124,7 +2999,7 @@ static struct clk sr2_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -3132,7 +3007,6 @@ static struct clk sr_l4_ick = {
 	.name		= "sr_l4_ick",
 	.ops		= &clkops_null, /* RMK: missing? */
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -3144,7 +3018,6 @@ static struct clk gpt12_fck = {
 	.name		= "gpt12_fck",
 	.ops		= &clkops_null,
 	.parent		= &secure_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
 
@@ -3152,223 +3025,7 @@ static struct clk wdt1_fck = {
 	.name		= "wdt1_fck",
 	.ops		= &clkops_null,
 	.parent		= &secure_32k_fck,
-	.flags		= CLOCK_IN_OMAP343X,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk *onchip_34xx_clks[] __initdata = {
-	&omap_32k_fck,
-	&virt_12m_ck,
-	&virt_13m_ck,
-	&virt_16_8m_ck,
-	&virt_19_2m_ck,
-	&virt_26m_ck,
-	&virt_38_4m_ck,
-	&osc_sys_ck,
-	&sys_ck,
-	&sys_altclk,
-	&mcbsp_clks,
-	&sys_clkout1,
-	&dpll1_ck,
-	&dpll1_x2_ck,
-	&dpll1_x2m2_ck,
-	&dpll2_ck,
-	&dpll2_m2_ck,
-	&dpll3_ck,
-	&core_ck,
-	&dpll3_x2_ck,
-	&dpll3_m2_ck,
-	&dpll3_m2x2_ck,
-	&dpll3_m3_ck,
-	&dpll3_m3x2_ck,
-	&emu_core_alwon_ck,
-	&dpll4_ck,
-	&dpll4_x2_ck,
-	&omap_96m_alwon_fck,
-	&omap_96m_fck,
-	&cm_96m_fck,
-	&virt_omap_54m_fck,
-	&omap_54m_fck,
-	&omap_48m_fck,
-	&omap_12m_fck,
-	&dpll4_m2_ck,
-	&dpll4_m2x2_ck,
-	&dpll4_m3_ck,
-	&dpll4_m3x2_ck,
-	&dpll4_m4_ck,
-	&dpll4_m4x2_ck,
-	&dpll4_m5_ck,
-	&dpll4_m5x2_ck,
-	&dpll4_m6_ck,
-	&dpll4_m6x2_ck,
-	&emu_per_alwon_ck,
-	&dpll5_ck,
-	&dpll5_m2_ck,
-	&omap_120m_fck,
-	&clkout2_src_ck,
-	&sys_clkout2,
-	&corex2_fck,
-	&dpll1_fck,
-	&mpu_ck,
-	&arm_fck,
-	&emu_mpu_alwon_ck,
-	&dpll2_fck,
-	&iva2_ck,
-	&l3_ick,
-	&l4_ick,
-	&rm_ick,
-	&gfx_l3_ck,
-	&gfx_l3_fck,
-	&gfx_l3_ick,
-	&gfx_cg1_ck,
-	&gfx_cg2_ck,
-	&sgx_fck,
-	&sgx_ick,
-	&d2d_26m_fck,
-	&gpt10_fck,
-	&gpt11_fck,
-	&cpefuse_fck,
-	&ts_fck,
-	&usbtll_fck,
-	&core_96m_fck,
-	&mmchs3_fck,
-	&mmchs2_fck,
-	&mspro_fck,
-	&mmchs1_fck,
-	&i2c3_fck,
-	&i2c2_fck,
-	&i2c1_fck,
-	&mcbsp5_fck,
-	&mcbsp1_fck,
-	&core_48m_fck,
-	&mcspi4_fck,
-	&mcspi3_fck,
-	&mcspi2_fck,
-	&mcspi1_fck,
-	&uart2_fck,
-	&uart1_fck,
-	&fshostusb_fck,
-	&core_12m_fck,
-	&hdq_fck,
-	&ssi_ssr_fck,
-	&ssi_sst_fck,
-	&core_l3_ick,
-	&hsotgusb_ick,
-	&sdrc_ick,
-	&gpmc_fck,
-	&security_l3_ick,
-	&pka_ick,
-	&core_l4_ick,
-	&usbtll_ick,
-	&mmchs3_ick,
-	&icr_ick,
-	&aes2_ick,
-	&sha12_ick,
-	&des2_ick,
-	&mmchs2_ick,
-	&mmchs1_ick,
-	&mspro_ick,
-	&hdq_ick,
-	&mcspi4_ick,
-	&mcspi3_ick,
-	&mcspi2_ick,
-	&mcspi1_ick,
-	&i2c3_ick,
-	&i2c2_ick,
-	&i2c1_ick,
-	&uart2_ick,
-	&uart1_ick,
-	&gpt11_ick,
-	&gpt10_ick,
-	&mcbsp5_ick,
-	&mcbsp1_ick,
-	&fac_ick,
-	&mailboxes_ick,
-	&omapctrl_ick,
-	&ssi_l4_ick,
-	&ssi_ick,
-	&usb_l4_ick,
-	&security_l4_ick2,
-	&aes1_ick,
-	&rng_ick,
-	&sha11_ick,
-	&des1_ick,
-	&dss1_alwon_fck,
-	&dss_tv_fck,
-	&dss_96m_fck,
-	&dss2_alwon_fck,
-	&dss_ick,
-	&cam_mclk,
-	&cam_ick,
-	&usbhost_120m_fck,
-	&usbhost_48m_fck,
-	&usbhost_ick,
-	&usbhost_sar_fck,
-	&usim_fck,
-	&gpt1_fck,
-	&wkup_32k_fck,
-	&gpio1_dbck,
-	&wdt2_fck,
-	&wkup_l4_ick,
-	&usim_ick,
-	&wdt2_ick,
-	&wdt1_ick,
-	&gpio1_ick,
-	&omap_32ksync_ick,
-	&gpt12_ick,
-	&gpt1_ick,
-	&per_96m_fck,
-	&per_48m_fck,
-	&uart3_fck,
-	&gpt2_fck,
-	&gpt3_fck,
-	&gpt4_fck,
-	&gpt5_fck,
-	&gpt6_fck,
-	&gpt7_fck,
-	&gpt8_fck,
-	&gpt9_fck,
-	&per_32k_alwon_fck,
-	&gpio6_dbck,
-	&gpio5_dbck,
-	&gpio4_dbck,
-	&gpio3_dbck,
-	&gpio2_dbck,
-	&wdt3_fck,
-	&per_l4_ick,
-	&gpio6_ick,
-	&gpio5_ick,
-	&gpio4_ick,
-	&gpio3_ick,
-	&gpio2_ick,
-	&wdt3_ick,
-	&uart3_ick,
-	&gpt9_ick,
-	&gpt8_ick,
-	&gpt7_ick,
-	&gpt6_ick,
-	&gpt5_ick,
-	&gpt4_ick,
-	&gpt3_ick,
-	&gpt2_ick,
-	&mcbsp2_ick,
-	&mcbsp3_ick,
-	&mcbsp4_ick,
-	&mcbsp2_fck,
-	&mcbsp3_fck,
-	&mcbsp4_fck,
-	&emu_src_ck,
-	&pclk_fck,
-	&pclkx2_fck,
-	&atclk_fck,
-	&traceclk_src_fck,
-	&traceclk_fck,
-	&sr1_fck,
-	&sr2_fck,
-	&sr_l4_ick,
-	&secure_32k_fck,
-	&gpt12_fck,
-	&wdt1_fck,
+	.recalc		= &followparent_recalc,
 };
 
 #endif
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 90372131055..e25e1ac64fc 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -21,6 +21,7 @@ config ARCH_OMAP2
 config ARCH_OMAP3
 	bool "TI OMAP3"
 	select CPU_V7
+	select COMMON_CLKDEV
 
 endchoice
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 214dc46d6ad..3895ba72979 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -136,10 +136,7 @@ extern const struct clkops clkops_null;
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-26 are currently free */
-#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+/* bits 13-31 are currently free */
 
 /* Clksel_rate flags */
 #define DEFAULT_RATE		(1 << 0)
-- 
cgit v1.2.3


From 2b811bb56a008f0f669a1bd82e4d077e75aa059a Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 16:28:32 +0000
Subject: [ARM] omap: remove pre-CLKDEV clk_get/clk_put

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/clock.c | 46 ----------------------------------------------
 1 file changed, 46 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 6b88f7878a5..5272a2212ab 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,45 +36,6 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk * clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno && strcmp(id, p->name) == 0) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0) {
-			clk = p;
-			break;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
@@ -147,13 +108,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-#ifndef CONFIG_COMMON_CLKDEV
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
 /*-------------------------------------------------------------------------
  * Optional clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
-- 
cgit v1.2.3


From f1c2543738d18e4398e3d6e27abff6676667975a Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 23 Jan 2009 22:34:09 +0000
Subject: [ARM] omap: provide a dummy clock node

By providing a dummy clock node, we can eliminate the SoC conditional
clock handing in the OMAP drivers, moving this knowledge out of the
driver and into the machine clock support code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 829b9b845b8..88c716331ee 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -33,6 +33,26 @@ static const struct clkops clkops_dspck;
 
 #include "clock.h"
 
+static int clk_omap1_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_omap1_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clkops_dummy = {
+	.enable = clk_omap1_dummy_enable,
+	.disable = clk_omap1_dummy_disable,
+};
+
+static struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_dummy,
+	.flags	= RATE_FIXED,
+};
+
 struct omap_clk {
 	u32		cpu;
 	struct clk_lookup lk;
-- 
cgit v1.2.3


From 39a80c7f379e1c1d3e63b204b8353b7381d0a3d5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 20:44:33 +0000
Subject: [ARM] omap: watchdog: convert clocks to match by devid and conid

This eliminates the need for separate OMAP24xx and OMAP34xx clock
requesting code sections.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c     | 2 +-
 arch/arm/mach-omap2/clock24xx.c | 4 ++--
 arch/arm/mach-omap2/clock34xx.c | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 88c716331ee..8ae7827bb8b 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -85,7 +85,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
 	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armwdt_ck",	&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
 	/* CK_GEN2 clocks */
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 36093ea878a..6a6278e5bbc 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -163,8 +163,8 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"mpu_wdt_ick",	&mpu_wdt_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 2c22750016c..b3334b355cb 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -214,10 +214,10 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
 	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
-	CLK(NULL,	"wdt2_fck",	&wdt2_fck,	CK_343X),
+	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
 	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
 	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
-	CLK(NULL,	"wdt2_ick",	&wdt2_ick,	CK_343X),
+	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
 	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
-- 
cgit v1.2.3


From 4c5e1946b5f89c33e3bc8ed73fa7ba8f31e37cc5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 23 Jan 2009 12:48:37 +0000
Subject: [ARM] omap: watchdog: provide a dummy ick for OMAP1

Eliminate the OMAP1 vs OMAP2 clock knowledge in the watchdog driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 8ae7827bb8b..758abaadaf3 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -86,6 +86,8 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
 	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
 	/* CK_GEN2 clocks */
-- 
cgit v1.2.3


From 5c9e02b1abcb227f47529ad72cc4a3234cddae49 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 20:53:30 +0000
Subject: [ARM] omap: MMC: convert clocks to match by devid and conid

Convert OMAP MMC driver to match clocks using the device ID and a
connection ID rather than a clock name.  This allows us to eliminate
the OMAP1/OMAP2 differences for the function clock.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c     | 4 ++--
 arch/arm/mach-omap2/clock24xx.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 758abaadaf3..3015e852965 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -124,8 +124,8 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
-	CLK("mmci-omap.0", "mmc_ck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.1", "mmc_ck",	&mmc2_ck,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
 	/* Virtual clocks */
 	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "i2c_fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 6a6278e5bbc..aca4ca42bf4 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -178,8 +178,8 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"mmc_ick",	&mmc_ick,	CK_242X),
-	CLK(NULL,	"mmc_fck",	&mmc_fck,	CK_242X),
+	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
-- 
cgit v1.2.3


From d4a36645a1a76e5294c1b00682fb849fc53ccd80 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 23 Jan 2009 19:03:37 +0000
Subject: [ARM] omap: MMC: provide a dummy ick for OMAP1

Eliminate the OMAP1 vs OMAP2 clock knowledge in the MMC driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 3015e852965..61ace02e7dd 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -125,7 +125,9 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
 	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
 	/* Virtual clocks */
 	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "i2c_fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
-- 
cgit v1.2.3


From 1b5715ec471d1def9722e22b6cb1d24841b5e290 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 20:49:37 +0000
Subject: [ARM] omap: mcspi: new short connection id names

... rather than the clock names themselves.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 12 ++++++------
 arch/arm/mach-omap2/clock34xx.c | 16 ++++++++--------
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aca4ca42bf4..ac038035c1c 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -149,12 +149,12 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck,	CK_243X),
 	CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick,	CK_243X),
 	CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck,	CK_243X),
-	CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick,	CK_243X),
-	CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck,	CK_243X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index b3334b355cb..d0bfae5a2f4 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -147,10 +147,10 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck,	CK_343X),
 	CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck,	CK_343X),
 	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
-	CLK("omap2_mcspi.4", "mcspi_fck", &mcspi4_fck,	CK_343X),
-	CLK("omap2_mcspi.3", "mcspi_fck", &mcspi3_fck,	CK_343X),
-	CLK("omap2_mcspi.2", "mcspi_fck", &mcspi2_fck,	CK_343X),
-	CLK("omap2_mcspi.1", "mcspi_fck", &mcspi1_fck,	CK_343X),
+	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
 	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
@@ -175,10 +175,10 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("mmci-omap-hs.0",	"mmchs_ick",	&mmchs1_ick,	CK_343X),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
 	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_343X),
-	CLK("omap2_mcspi.4", "mcspi_ick", &mcspi4_ick,	CK_343X),
-	CLK("omap2_mcspi.3", "mcspi_ick", &mcspi3_ick,	CK_343X),
-	CLK("omap2_mcspi.2", "mcspi_ick", &mcspi2_ick,	CK_343X),
-	CLK("omap2_mcspi.1", "mcspi_ick", &mcspi1_ick,	CK_343X),
+	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
 	CLK("i2c_omap.3", "i2c_ick",	&i2c3_ick,	CK_343X),
 	CLK("i2c_omap.2", "i2c_ick",	&i2c2_ick,	CK_343X),
 	CLK("i2c_omap.1", "i2c_ick",	&i2c1_ick,	CK_343X),
-- 
cgit v1.2.3


From b820ce4e6736ddad7ccda528e10aaf37ad3f13f9 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 23 Jan 2009 10:26:46 +0000
Subject: [ARM] omap: mcbsp: convert to use fck/ick clocks directly

Rather than introducing a special 'mcbsp_clk' with code behind it in
mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp
driver to be like any other driver.  mcbsp requests its fck and ick
clocks directly, and the SoC specific code deals with selecting the
correct clock.

There is one oddity to deal with - OMAP1 fiddles with the DSP clocks
and DSP reset, so we move this to the two callback functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             |  9 ++++
 arch/arm/mach-omap1/mcbsp.c             | 52 +++++++++++--------
 arch/arm/mach-omap2/clock24xx.c         | 20 ++++----
 arch/arm/mach-omap2/clock34xx.c         | 20 ++++----
 arch/arm/mach-omap2/mcbsp.c             | 26 ----------
 arch/arm/plat-omap/include/mach/mcbsp.h |  6 +--
 arch/arm/plat-omap/mcbsp.c              | 90 ++++++++++++++-------------------
 7 files changed, 100 insertions(+), 123 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 61ace02e7dd..b62da4c9563 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -132,6 +132,15 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "i2c_fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "i2c_ick",	&i2c_ick,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
 };
 
 static int omap1_clk_enable_generic(struct clk * clk);
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 575ba31295c..d040c3f1027 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -28,9 +28,9 @@
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
 
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
-#endif
+static int dsp_use;
+static struct clk *api_clk;
+static struct clk *dsp_clk;
 
 static void omap1_mcbsp_request(unsigned int id)
 {
@@ -39,20 +39,40 @@ static void omap1_mcbsp_request(unsigned int id)
 	 * are DSP public peripherals.
 	 */
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
-		omap_dsp_request_mem();
-		/*
-		 * DSP external peripheral reset
-		 * FIXME: This should be moved to dsp code
-		 */
-		__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
-				DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+		if (dsp_use++ == 0) {
+			api_clk = clk_get(NULL, "api_clk");
+			dsp_clk = clk_get(NULL, "dsp_clk");
+			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
+				clk_enable(api_clk);
+				clk_enable(dsp_clk);
+
+				omap_dsp_request_mem();
+				/*
+				 * DSP external peripheral reset
+				 * FIXME: This should be moved to dsp code
+				 */
+				__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+						DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+			}
+		}
 	}
 }
 
 static void omap1_mcbsp_free(unsigned int id)
 {
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
-		omap_dsp_release_mem();
+	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+		if (--dsp_use == 0) {
+			omap_dsp_release_mem();
+			if (!IS_ERR(api_clk)) {
+				clk_disable(api_clk);
+				clk_put(api_clk);
+			}
+			if (!IS_ERR(dsp_clk)) {
+				clk_disable(dsp_clk);
+				clk_put(dsp_clk);
+			}
+		}
+	}
 }
 
 static struct omap_mcbsp_ops omap1_mcbsp_ops = {
@@ -94,8 +114,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 	{
 		.phys_base	= OMAP1510_MCBSP2_BASE,
@@ -112,8 +130,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
@@ -131,8 +147,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP1RX,
 		.tx_irq		= INT_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP2_BASE,
@@ -149,8 +163,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_McBSP3RX,
 		.tx_irq		= INT_McBSP3TX,
 		.ops		= &omap1_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 3,
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ac038035c1c..ea21d55a207 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -139,16 +139,16 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick,	CK_243X),
-	CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck,	CK_243X),
-	CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick,	CK_243X),
-	CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck,	CK_243X),
-	CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick,	CK_243X),
-	CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck,	CK_243X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
 	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index d0bfae5a2f4..a70aa2eaf05 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -144,8 +144,8 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("i2c_omap.3", "i2c_fck",	&i2c3_fck,	CK_343X),
 	CLK("i2c_omap.2", "i2c_fck",	&i2c2_fck,	CK_343X),
 	CLK("i2c_omap.1", "i2c_fck",	&i2c1_fck,	CK_343X),
-	CLK("omap-mcbsp.5", "mcbsp_fck", &mcbsp5_fck,	CK_343X),
-	CLK("omap-mcbsp.1", "mcbsp_fck", &mcbsp1_fck,	CK_343X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
 	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
 	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
 	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
@@ -186,8 +186,8 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
 	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
 	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
-	CLK("omap-mcbsp.5", "mcbsp_ick", &mcbsp5_ick,	CK_343X),
-	CLK("omap-mcbsp.1", "mcbsp_ick", &mcbsp1_ick,	CK_343X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
@@ -257,12 +257,12 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
 	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
 	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "mcbsp_ick", &mcbsp2_ick,	CK_343X),
-	CLK("omap-mcbsp.3", "mcbsp_ick", &mcbsp3_ick,	CK_343X),
-	CLK("omap-mcbsp.4", "mcbsp_ick", &mcbsp4_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "mcbsp_fck", &mcbsp2_fck,	CK_343X),
-	CLK("omap-mcbsp.3", "mcbsp_fck", &mcbsp3_fck,	CK_343X),
-	CLK("omap-mcbsp.4", "mcbsp_fck", &mcbsp4_fck,	CK_343X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
 	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
 	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
 	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a9e631fc113..a5c0f0435cd 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -24,8 +24,6 @@
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
 
-const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
-
 static void omap2_mcbsp2_mux_setup(void)
 {
 	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
@@ -57,8 +55,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -67,8 +63,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -86,8 +80,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -96,8 +88,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP3_BASE,
@@ -106,8 +96,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP4_BASE,
@@ -116,8 +104,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP5_BASE,
@@ -126,8 +112,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -145,8 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -155,8 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -165,8 +145,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -175,8 +153,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -185,8 +161,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.clk_names	= clk_names,
-		.num_clks	= 2,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 113c2466c86..bb154ea7676 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -344,8 +344,6 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
-	char const **clk_names;
-	int num_clks;
 };
 
 struct omap_mcbsp {
@@ -377,8 +375,8 @@ struct omap_mcbsp {
 	/* Protect the field .free, while checking if the mcbsp is in use */
 	spinlock_t lock;
 	struct omap_mcbsp_platform_data *pdata;
-	struct clk **clks;
-	int num_clks;
+	struct clk *iclk;
+	struct clk *fclk;
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e5842e30e53..28b0a824b8c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -214,7 +214,6 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 int omap_mcbsp_request(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
-	int i;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -223,23 +222,23 @@ int omap_mcbsp_request(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
-		mcbsp->pdata->ops->request(id);
-
-	for (i = 0; i < mcbsp->num_clks; i++)
-		clk_enable(mcbsp->clks[i]);
-
 	spin_lock(&mcbsp->lock);
 	if (!mcbsp->free) {
 		dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
 			mcbsp->id);
 		spin_unlock(&mcbsp->lock);
-		return -1;
+		return -EBUSY;
 	}
 
 	mcbsp->free = 0;
 	spin_unlock(&mcbsp->lock);
 
+	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+		mcbsp->pdata->ops->request(id);
+
+	clk_enable(mcbsp->iclk);
+	clk_enable(mcbsp->fclk);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -278,7 +277,6 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 void omap_mcbsp_free(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
-	int i;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -289,8 +287,14 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
-	for (i = mcbsp->num_clks - 1; i >= 0; i--)
-		clk_disable(mcbsp->clks[i]);
+	clk_disable(mcbsp->fclk);
+	clk_disable(mcbsp->iclk);
+
+	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
+		/* Free IRQs */
+		free_irq(mcbsp->rx_irq, (void *)mcbsp);
+		free_irq(mcbsp->tx_irq, (void *)mcbsp);
+	}
 
 	spin_lock(&mcbsp->lock);
 	if (mcbsp->free) {
@@ -302,12 +306,6 @@ void omap_mcbsp_free(unsigned int id)
 
 	mcbsp->free = 1;
 	spin_unlock(&mcbsp->lock);
-
-	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
-		/* Free IRQs */
-		free_irq(mcbsp->rx_irq, (void *)mcbsp);
-		free_irq(mcbsp->tx_irq, (void *)mcbsp);
-	}
 }
 EXPORT_SYMBOL(omap_mcbsp_free);
 
@@ -876,7 +874,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
 	struct omap_mcbsp *mcbsp;
 	int id = pdev->id - 1;
-	int i;
 	int ret = 0;
 
 	if (!pdata) {
@@ -899,7 +896,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto exit;
 	}
-	mcbsp_ptr[id] = mcbsp;
 
 	spin_lock_init(&mcbsp->lock);
 	mcbsp->id = id + 1;
@@ -921,39 +917,32 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dma_rx_sync = pdata->dma_rx_sync;
 	mcbsp->dma_tx_sync = pdata->dma_tx_sync;
 
-	if (pdata->num_clks) {
-		mcbsp->num_clks = pdata->num_clks;
-		mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
-					GFP_KERNEL);
-		if (!mcbsp->clks) {
-			ret = -ENOMEM;
-			goto exit;
-		}
-		for (i = 0; i < mcbsp->num_clks; i++) {
-			mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
-			if (IS_ERR(mcbsp->clks[i])) {
-				dev_err(&pdev->dev,
-					"Invalid %s configuration for McBSP%d.\n",
-					pdata->clk_names[i], mcbsp->id);
-				ret = PTR_ERR(mcbsp->clks[i]);
-				goto err_clk;
-			}
-		}
+	mcbsp->iclk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(mcbsp->iclk)) {
+		ret = PTR_ERR(mcbsp->iclk);
+		dev_err(&pdev->dev, "unable to get ick: %d\n", ret);
+		goto err_iclk;
+	}
 
+	mcbsp->fclk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(mcbsp->fclk)) {
+		ret = PTR_ERR(mcbsp->fclk);
+		dev_err(&pdev->dev, "unable to get fck: %d\n", ret);
+		goto err_fclk;
 	}
 
 	mcbsp->pdata = pdata;
 	mcbsp->dev = &pdev->dev;
+	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
 	return 0;
 
-err_clk:
-	while (i--)
-		clk_put(mcbsp->clks[i]);
-	kfree(mcbsp->clks);
+err_fclk:
+	clk_put(mcbsp->iclk);
+err_iclk:
 	iounmap(mcbsp->io_base);
 err_ioremap:
-	mcbsp->free = 0;
+	kfree(mcbsp);
 exit:
 	return ret;
 }
@@ -961,7 +950,6 @@ exit:
 static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 {
 	struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
-	int i;
 
 	platform_set_drvdata(pdev, NULL);
 	if (mcbsp) {
@@ -970,18 +958,15 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
-		for (i = mcbsp->num_clks - 1; i >= 0; i--) {
-			clk_disable(mcbsp->clks[i]);
-			clk_put(mcbsp->clks[i]);
-		}
+		clk_disable(mcbsp->fclk);
+		clk_disable(mcbsp->iclk);
+		clk_put(mcbsp->fclk);
+		clk_put(mcbsp->iclk);
 
 		iounmap(mcbsp->io_base);
 
-		if (mcbsp->num_clks) {
-			kfree(mcbsp->clks);
-			mcbsp->clks = NULL;
-			mcbsp->num_clks = 0;
-		}
+		mcbsp->fclk = NULL;
+		mcbsp->iclk = NULL;
 		mcbsp->free = 0;
 		mcbsp->dev = NULL;
 	}
@@ -1002,4 +987,3 @@ int __init omap_mcbsp_init(void)
 	/* Register the McBSP driver */
 	return platform_driver_register(&omap_mcbsp_driver);
 }
-
-- 
cgit v1.2.3


From 1d14de087dd1cab0436fb7c9d5e38d852f33df69 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 21:02:29 +0000
Subject: [ARM] omap: i2c: use short connection ids

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c     |  4 ++--
 arch/arm/mach-omap2/clock24xx.c | 12 ++++++------
 arch/arm/mach-omap2/clock34xx.c | 12 ++++++------
 3 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index b62da4c9563..382e09a1cec 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -130,8 +130,8 @@ static struct omap_clk omap_clks[] = {
 	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
 	/* Virtual clocks */
 	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "i2c_fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "i2c_ick",	&i2c_ick,	CK_16XX),
+	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
 	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
 	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
 	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ea21d55a207..81c7b705114 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -186,12 +186,12 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
 	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "i2c_ick",	&i2c1_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "i2c_fck",	&i2c1_fck,	CK_242X),
-	CLK("i2c_omap.1", "i2c_fck",	&i2chs1_fck,	CK_243X),
-	CLK("i2c_omap.2", "i2c_ick",	&i2c2_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.2", "i2c_fck",	&i2c2_fck,	CK_242X),
-	CLK("i2c_omap.2", "i2c_fck",	&i2chs2_fck,	CK_243X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index a70aa2eaf05..859ad1d4062 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -141,9 +141,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("mmci-omap-hs.1",	"mmchs_fck",	&mmchs2_fck,	CK_343X),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
 	CLK("mmci-omap-hs.0",	"mmchs_fck",	&mmchs1_fck,	CK_343X),
-	CLK("i2c_omap.3", "i2c_fck",	&i2c3_fck,	CK_343X),
-	CLK("i2c_omap.2", "i2c_fck",	&i2c2_fck,	CK_343X),
-	CLK("i2c_omap.1", "i2c_fck",	&i2c1_fck,	CK_343X),
+	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
 	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
 	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
 	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
@@ -179,9 +179,9 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
-	CLK("i2c_omap.3", "i2c_ick",	&i2c3_ick,	CK_343X),
-	CLK("i2c_omap.2", "i2c_ick",	&i2c2_ick,	CK_343X),
-	CLK("i2c_omap.1", "i2c_ick",	&i2c1_ick,	CK_343X),
+	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
 	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
-- 
cgit v1.2.3


From 5fe23380405d3a65ce6f46d270c4d3a31027430b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Fri, 23 Jan 2009 22:57:12 +0000
Subject: [ARM] omap: i2c: remove conditional ick clocks

By providing a dummy ick for OMAP1510 and OMAP310, we avoid having
SoC conditional clock information in i2c-omap.c.  Also, fix the
error handling by making sure we propagate the error returned via
clk_get().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 382e09a1cec..d2c61390346 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -132,6 +132,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
+	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
 	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
 	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
 	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-- 
cgit v1.2.3


From cc51c9d444ae1532be6a600c65ac0d3d22472c53 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 22 Jan 2009 10:12:04 +0000
Subject: [ARM] omap: w1: convert omap HDQ clocks to match by devid and conid

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 4 ++--
 arch/arm/mach-omap2/clock34xx.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 81c7b705114..f83588002f6 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -184,8 +184,8 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
-	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_243X | CK_242X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
 	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
 	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
 	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 859ad1d4062..1a4bc336c8a 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -155,7 +155,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
-	CLK(NULL,	"hdq_fck",	&hdq_fck,	CK_343X),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
@@ -174,7 +174,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("mmci-omap-hs.1",	"mmchs_ick",	&mmchs2_ick,	CK_343X),
 	CLK("mmci-omap-hs.0",	"mmchs_ick",	&mmchs1_ick,	CK_343X),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
-	CLK(NULL,	"hdq_ick",	&hdq_ick,	CK_343X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
 	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
-- 
cgit v1.2.3


From b1ad379632327c0722c5c92275c326971da3b948 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 22 Jan 2009 19:41:20 +0000
Subject: [ARM] omap: spi: arrange for omap_uwire to use connection ID

... which now means no driver requests the "armxor_ck" clock directly.
Also, fix the error handling for clk_get(), ensuring that we propagate
the error returned from clk_get().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index d2c61390346..7c455431790 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -133,6 +133,7 @@ static struct omap_clk omap_clks[] = {
 	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
 	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
 	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
 	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
 	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-- 
cgit v1.2.3


From eeec7c8d18465a85c212230bdb715e3f029dbf4e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 19 Jan 2009 20:58:56 +0000
Subject: [ARM] omap: convert omap RNG clocks to match by devid and conid

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 2 +-
 arch/arm/mach-omap2/clock34xx.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index f83588002f6..1e9ac83dca5 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -200,7 +200,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
 	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"rng_ick",	&rng_ick,	CK_243X | CK_242X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1a4bc336c8a..07e3308da65 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -196,7 +196,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
 	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
 	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
-	CLK(NULL,	"rng_ick",	&rng_ick,	CK_343X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
 	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
-- 
cgit v1.2.3


From 6c5dbb40f4795f3fdbf3e5aab7eda4e2f838d08b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 24 Jan 2009 16:27:06 +0000
Subject: [ARM] omap: omap24xxcam: use short connection IDs for omap2 clocks

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 1e9ac83dca5..d190b6a7493 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -169,8 +169,8 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
-	CLK(NULL,	"cam_fck",	&cam_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"cam_ick",	&cam_ick,	CK_243X | CK_242X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
-- 
cgit v1.2.3


From 6f7607ccd175518a3ee7dccc1620f3a086689668 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 28 Jan 2009 10:22:50 +0000
Subject: [ARM] omap: hsmmc: new short connection id names

... rather than the clock names themselves.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c |  8 ++++----
 arch/arm/mach-omap2/clock34xx.c | 12 ++++++------
 arch/arm/mach-omap2/devices.c   |  4 ++--
 3 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index d190b6a7493..bd77ef2d5ae 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -205,10 +205,10 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
 	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "mmchs_ick",	&mmchs1_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "mmchs_fck",	&mmchs1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "mmchs_ick",	&mmchs2_ick,	CK_243X),
-	CLK("mmci-omap-hs.1", "mmchs_fck",	&mmchs2_fck,	CK_243X),
+	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
 	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
 	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 07e3308da65..245a7b9b560 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -137,10 +137,10 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
-	CLK("mmci-omap-hs.2",	"mmchs_fck",	&mmchs3_fck,	CK_3430ES2),
-	CLK("mmci-omap-hs.1",	"mmchs_fck",	&mmchs2_fck,	CK_343X),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
+	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
-	CLK("mmci-omap-hs.0",	"mmchs_fck",	&mmchs1_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
 	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
 	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
 	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
@@ -166,13 +166,13 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
-	CLK("mmci-omap-hs.2",	"mmchs_ick",	&mmchs3_ick,	CK_3430ES2),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
 	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
 	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
 	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
-	CLK("mmci-omap-hs.1",	"mmchs_ick",	&mmchs2_ick,	CK_343X),
-	CLK("mmci-omap-hs.0",	"mmchs_ick",	&mmchs1_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
+	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
 	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
 	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 97304044152..8075f5868c3 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -349,11 +349,11 @@ static void __init omap_hsmmc_reset(void)
 
 		dummy_pdev.id = i;
 		dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
-		iclk = clk_get(dev, "mmchs_ick");
+		iclk = clk_get(dev, "ick");
 		if (iclk && clk_enable(iclk))
 			iclk = NULL;
 
-		fclk = clk_get(dev, "mmchs_fck");
+		fclk = clk_get(dev, "fck");
 		if (fclk && clk_enable(fclk))
 			fclk = NULL;
 
-- 
cgit v1.2.3


From 16c90f020034d3cd38b3dab280001e728e6b19e5 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:12:47 -0700
Subject: [ARM] OMAP2/3: Add non-CORE DPLL rate set code and M, N programming

Add non-CORE DPLL rate set code and M,N programming for OMAP3.
Connect it to OMAP34xx DPLLs 1, 2, 4, 5 via the clock framework.

You may see some warnings on rate sets from the freqsel code.  The
table that TI presented in the 3430 TRM Rev F does not cover Fint <
750000, which definitely occurs in practice.  However, the lack of this
freqsel case does not appear to impair the DPLL rate change.

linux-omap source commit is 689fe67c6d1ad8f52f7f7b139a3274b79bf3e784.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c         | 137 +++++++++++++++++++++++++++++++-
 arch/arm/mach-omap2/clock34xx.h         |  11 +++
 arch/arm/plat-omap/include/mach/clock.h |   1 +
 3 files changed, 148 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 245a7b9b560..943ac63fc6f 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -340,6 +340,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	return ret;
 }
 
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk->parent->rate / (n + 1);
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
 /* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
 
 /*
@@ -476,7 +512,7 @@ static int omap3_noncore_dpll_enable(struct clk *clk)
 	if (clk == &dpll3_ck)
 		return -EINVAL;
 
-	if (clk->parent->rate == clk_get_rate(clk))
+	if (clk->parent->rate == omap2_get_dpll_rate(clk))
 		r = _omap3_noncore_dpll_bypass(clk);
 	else
 		r = _omap3_noncore_dpll_lock(clk);
@@ -506,11 +542,110 @@ static void omap3_noncore_dpll_disable(struct clk *clk)
 	_omap3_noncore_dpll_stop(clk);
 }
 
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+
+	/* Set mult (M), div1 (N), freqsel */
+	v |= m << __ffs(dd->mult_mask);
+	v |= n << __ffs(dd->div1_mask);
+	v |= freqsel << __ffs(dd->freqsel_mask);
+
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL with the rounded target rate.  Returns -EINVAL upon
+ * error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u16 freqsel;
+	struct dpll_data *dd;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (rate == omap2_get_dpll_rate(clk))
+		return 0;
+
+	if (dd->last_rounded_rate != rate)
+		omap2_dpll_round_rate(clk, rate);
+
+	if (dd->last_rounded_rate == 0)
+		return -EINVAL;
+
+	freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+	if (!freqsel)
+		WARN_ON(1);
+
+	omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
+				   freqsel);
+
+	omap3_dpll_recalc(clk);
+
+	return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (omap_rev() == OMAP3430_REV_ES1_0) {
+		printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+	return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
 static const struct clkops clkops_noncore_dpll_ops = {
 	.enable		= &omap3_noncore_dpll_enable,
 	.disable	= &omap3_noncore_dpll_disable,
 };
 
+/* DPLL autoidle read/set code */
+
+
 /**
  * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
  * @clk: struct clk * of the DPLL to read
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 6bd8c6d5a4e..f811a097851 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -32,6 +32,8 @@ static void omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
 static void omap3_dpll_deny_idle(struct clk *clk);
 static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
 
 /* Maximum DPLL multiplier, divider values for OMAP3 */
 #define OMAP3_MAX_DPLL_MULT		2048
@@ -254,6 +256,7 @@ static struct dpll_data dpll1_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
@@ -276,6 +279,7 @@ static struct clk dpll1_ck = {
 	.dpll_data	= &dpll1_dd,
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -321,6 +325,7 @@ static struct dpll_data dpll2_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
@@ -344,6 +349,7 @@ static struct clk dpll2_ck = {
 	.dpll_data	= &dpll2_dd,
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -378,6 +384,7 @@ static struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
 	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
@@ -558,6 +565,7 @@ static struct dpll_data dpll4_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -580,6 +588,7 @@ static struct clk dpll4_ck = {
 	.dpll_data	= &dpll4_dd,
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_dpll4_set_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -864,6 +873,7 @@ static struct dpll_data dpll5_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
 	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
 	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -886,6 +896,7 @@ static struct clk dpll5_ck = {
 	.dpll_data	= &dpll5_dd,
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
 	.recalc		= &omap3_dpll_recalc,
 };
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 3895ba72979..f147aec91f1 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -53,6 +53,7 @@ struct dpll_data {
 	void __iomem		*idlest_reg;
 	u32			enable_mask;
 	u32			autoidle_mask;
+	u32			freqsel_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-- 
cgit v1.2.3


From fecb494beef09e4caaa80313834af26f57091195 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:12:50 -0700
Subject: [ARM] OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code

Fix sparse & checkpatch warnings in OMAP2/3 PRCM & PM code.  This mostly
consists of:

- converting pointer comparisons to integers in form similar to
  (ptr == 0) to the standard idiom (!ptr)

- labeling a few non-static private functions as static

- adding prototypes for *_init() functions in the appropriate header
  files, and getting rid of the corresponding open-coded extern
  prototypes in other C files

- renaming the variable 'sclk' in mach-omap2/clock.c:omap2_get_apll_clkin
  to avoid shadowing an earlier declaration

Clean up checkpatch issues.  This mostly involves:

- converting some asm/ includes to linux/ includes

- cleaning up some whitespace

- getting rid of braces for conditionals with single following statements

Also take care of a few odds and ends, including:

- getting rid of unlikely() and likely() - none of this code is particularly
  fast-path code, so the performance impact seems slim; and some of those
  likely() and unlikely() indicators are probably not as accurate as the
  ARM's branch predictor

- removing some superfluous casts

linux-omap source commit is 347df59f5d20fdf905afbc26b1328b0e28a8a01b.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c                   | 51 +++++++++++++--------------
 arch/arm/mach-omap2/clock.h                   |  2 +-
 arch/arm/mach-omap2/clock24xx.c               | 16 +++++----
 arch/arm/mach-omap2/pm.c                      |  2 +-
 arch/arm/plat-omap/include/mach/clock.h       |  4 +--
 arch/arm/plat-omap/include/mach/powerdomain.h |  1 +
 arch/arm/plat-omap/include/mach/prcm.h        |  5 +--
 arch/arm/plat-omap/include/mach/system.h      |  4 +--
 8 files changed, 44 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 53fda9977d5..886f73f3933 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -26,7 +26,6 @@
 
 #include <mach/clock.h>
 #include <mach/clockdomain.h>
-#include <mach/sram.h>
 #include <mach/cpu.h>
 #include <asm/div64.h>
 
@@ -187,11 +186,10 @@ int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
 	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
 	 * 34xx reverses this, just to keep us on our toes
 	 */
-	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
 		ena = mask;
-	} else if (cpu_mask & RATE_IN_343X) {
+	else if (cpu_mask & RATE_IN_343X)
 		ena = 0;
-	}
 
 	/* Wait for lock */
 	while (((__raw_readl(reg) & mask) != ena) &&
@@ -267,7 +265,7 @@ static int omap2_dflt_clk_enable_wait(struct clk *clk)
 {
 	int ret;
 
-	if (unlikely(clk->enable_reg == NULL)) {
+	if (!clk->enable_reg) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return 0; /* REVISIT: -EINVAL */
@@ -283,7 +281,7 @@ static void omap2_dflt_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->enable_reg == NULL) {
+	if (!clk->enable_reg) {
 		/*
 		 * 'Independent' here refers to a clock which is not
 		 * controlled by its parent.
@@ -330,7 +328,7 @@ void omap2_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
 		_omap2_clk_disable(clk);
-		if (likely((u32)clk->parent))
+		if (clk->parent)
 			omap2_clk_disable(clk->parent);
 		if (clk->clkdm)
 			omap2_clkdm_clk_disable(clk->clkdm, clk);
@@ -343,10 +341,10 @@ int omap2_clk_enable(struct clk *clk)
 	int ret = 0;
 
 	if (clk->usecount++ == 0) {
-		if (likely((u32)clk->parent))
+		if (clk->parent)
 			ret = omap2_clk_enable(clk->parent);
 
-		if (unlikely(ret != 0)) {
+		if (ret != 0) {
 			clk->usecount--;
 			return ret;
 		}
@@ -356,7 +354,7 @@ int omap2_clk_enable(struct clk *clk)
 
 		ret = _omap2_clk_enable(clk);
 
-		if (unlikely(ret != 0)) {
+		if (ret != 0) {
 			if (clk->clkdm)
 				omap2_clkdm_clk_disable(clk->clkdm, clk);
 
@@ -384,7 +382,7 @@ void omap2_clksel_recalc(struct clk *clk)
 	if (div == 0)
 		return;
 
-	if (unlikely(clk->rate == clk->parent->rate / div))
+	if (clk->rate == (clk->parent->rate / div))
 		return;
 	clk->rate = clk->parent->rate / div;
 
@@ -400,8 +398,8 @@ void omap2_clksel_recalc(struct clk *clk)
  * the element associated with the supplied parent clock address.
  * Returns a pointer to the struct clksel on success or NULL on error.
  */
-const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
-						struct clk *src_clk)
+static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+						       struct clk *src_clk)
 {
 	const struct clksel *clks;
 
@@ -450,7 +448,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 	*new_div = 1;
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (clks == NULL)
+	if (!clks)
 		return ~0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -509,7 +507,7 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 /* Given a clock and a rate apply a clock specific rounding function */
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (clk->round_rate != NULL)
+	if (clk->round_rate)
 		return clk->round_rate(clk, rate);
 
 	if (clk->flags & RATE_FIXED)
@@ -535,7 +533,7 @@ u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
 	const struct clksel_rate *clkr;
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (clks == NULL)
+	if (!clks)
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -571,7 +569,7 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 	WARN_ON(div == 0);
 
 	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (clks == NULL)
+	if (!clks)
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -596,9 +594,9 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
  *
  * Returns the address of the clksel register upon success or NULL on error.
  */
-void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
+static void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
 {
-	if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
+	if (!clk->clksel_reg || (clk->clksel_mask == 0))
 		return NULL;
 
 	*field_mask = clk->clksel_mask;
@@ -618,7 +616,7 @@ u32 omap2_clksel_get_divisor(struct clk *clk)
 	void __iomem *div_addr;
 
 	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (div_addr == NULL)
+	if (!div_addr)
 		return 0;
 
 	field_val = __raw_readl(div_addr) & field_mask;
@@ -637,7 +635,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (div_addr == NULL)
+	if (!div_addr)
 		return -EINVAL;
 
 	field_val = omap2_divisor_to_clksel(clk, new_div);
@@ -675,7 +673,7 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
-	if (clk->set_rate != NULL)
+	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
 
 	return ret;
@@ -696,7 +694,7 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
 	*src_addr = NULL;
 
 	clks = omap2_get_clksel_by_parent(clk, src_clk);
-	if (clks == NULL)
+	if (!clks)
 		return 0;
 
 	for (clkr = clks->rates; clkr->div; clkr++) {
@@ -726,7 +724,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	void __iomem *src_addr;
 	u32 field_val, field_mask, reg_val, parent_div;
 
-	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+	if (clk->flags & CONFIG_PARTICIPANT)
 		return -EINVAL;
 
 	if (!clk->clksel)
@@ -734,7 +732,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 
 	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
 					       &field_mask, clk, &parent_div);
-	if (src_addr == NULL)
+	if (!src_addr)
 		return -EINVAL;
 
 	if (clk->usecount > 0)
@@ -794,7 +792,8 @@ int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
 	return 0;
 }
 
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+					    unsigned int m, unsigned int n)
 {
 	unsigned long long num;
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b0358b659b4..90077f0df78 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -27,7 +27,7 @@ void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
 long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index bd77ef2d5ae..91ad2070264 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -339,7 +339,7 @@ static const struct clkops clkops_fixed = {
  * Uses the current prcm set to tell if a rate is valid.
  * You can go slower, but not faster within a given rate set.
  */
-long omap2_dpllcore_round_rate(unsigned long target_rate)
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
@@ -550,7 +550,9 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 		/* Major subsystem dividers */
 		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+				 CM_CLKSEL1);
+
 		if (cpu_is_omap2430())
 			cm_write_mod_reg(prcm->cm_clksel_mdm,
 					 OMAP2430_MDM_MOD, CM_CLKSEL);
@@ -582,20 +584,20 @@ static struct clk_functions omap2_clk_functions = {
 
 static u32 omap2_get_apll_clkin(void)
 {
-	u32 aplls, sclk = 0;
+	u32 aplls, srate = 0;
 
 	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
 	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
 	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
 
 	if (aplls == APLLS_CLKIN_19_2MHZ)
-		sclk = 19200000;
+		srate = 19200000;
 	else if (aplls == APLLS_CLKIN_13MHZ)
-		sclk = 13000000;
+		srate = 13000000;
 	else if (aplls == APLLS_CLKIN_12MHZ)
-		sclk = 12000000;
+		srate = 12000000;
 
-	return sclk;
+	return srate;
 }
 
 static u32 omap2_get_sysclkdiv(void)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 55361c16c9d..ea8ceaed09c 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -103,7 +103,7 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index f147aec91f1..6f49a333289 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -113,12 +113,12 @@ struct clk_functions {
 
 extern unsigned int mpurate;
 
-extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_init(struct clk_functions *custom_clocks);
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
+extern void followparent_recalc(struct clk *clk);
 extern int clk_get_usecount(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 2806a9c8e4d..4948cb7af5b 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -145,6 +145,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
 
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
 int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
 int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
 int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
 
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 56eba0fd6f6..24ac3c71591 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -20,10 +20,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
+void omap_prcm_arch_reset(char mode);
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06923f26154..e9b95637f7f 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -9,12 +9,12 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
+#include <mach/prcm.h>
+
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
 #endif
 
-extern void omap_prcm_arch_reset(char mode);
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
-- 
cgit v1.2.3


From 9299fd85a00a52b7c575fa02b3031ad407a15344 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:12:54 -0700
Subject: [ARM] OMAP24xx clock: add missing SSI L4 interface clock

This patch adds a missing OMAP24xx clock, the SSI L4 interface clock,
as "ssi_l4_ick".

linux-omap source commit is ace129d39b3107d330d4cf6934385d13521f2fec.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c |  1 +
 arch/arm/mach-omap2/clock24xx.h | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 91ad2070264..421728a7f90 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -112,6 +112,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
 	/* L4 domain clocks */
 	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
 	/* virtual meta-group clock */
 	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
 	/* general l4 interface ck, multi-parent functional clk */
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index b2442475fb4..32dd8573e56 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -1276,6 +1276,20 @@ static struct clk ssi_ssr_sst_fck = {
 	.set_rate	= &omap2_clksel_set_rate
 };
 
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
 
 /*
  * GFX clock domain
-- 
cgit v1.2.3


From 207233533dd197457634810c6dc1b5d65ab6b8c7 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:12:57 -0700
Subject: [ARM] OMAP3: move USBHOST SAR handling from clock framework to
 powerdomain layer

Remove usbhost_sar_fclk from the OMAP3 clock framework.  The bit that
the clock was tweaking doesn't actually enable or disable a clock; it
controls whether the hardware will save and restore USBHOST state
when the powerdomain changes state.  (That happens to coincidentally
enable a clock for the duration of the operation, hence the earlier
confusion.)

In place of the clock, mark the USBHOST powerdomain as supporting
hardware save-and-restore functionality.

linux-omap source commit is f3ceac86a9d425d101d606d87a5af44afef27179.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c        |  1 -
 arch/arm/mach-omap2/clock34xx.h        | 11 -----------
 arch/arm/mach-omap2/powerdomains34xx.h |  1 +
 3 files changed, 1 insertion(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 943ac63fc6f..439a66918d3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -209,7 +209,6 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
-	CLK(NULL,	"usbhost_sar_fck", &usbhost_sar_fck, CK_3430ES2),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index f811a097851..a2dcf574d98 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2218,17 +2218,6 @@ static struct clk usbhost_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usbhost_sar_fck = {
-	.name		= "usbhost_sar_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &osc_sys_ck,
-	.init		= &omap2_init_clk_clkdm,
-	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
-	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
 /* WKUP */
 
 static const struct clksel_rate usim_96m_rates[] = {
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index f573f710839..3a8e4fbea5f 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -312,6 +312,7 @@ static struct powerdomain usbhost_pwrdm = {
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
+	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
-- 
cgit v1.2.3


From 9cfd985e27bfdf1e120aecaf595db265f4b5eb27 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:13:02 -0700
Subject: [ARM] OMAP3 clock: fix 96MHz clocks

Fix some bugs in the OMAP3 clock tree pertaining to the 96MHz clocks.
The 96MHz portion of the clock tree should now have reasonable
fidelity to the 34xx TRM Rev I.

One remaining question mark: it's not clear exactly which 96MHz source
clock the USIM uses.  This patch sticks with the previous setting, which
seems reasonable.

linux-omap source commit is 15c706e8179ce238c3ba70a25846a36b73bd2359.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.h       | 58 ++++++++++++++++++++++-------------
 arch/arm/mach-omap2/cm-regbits-34xx.h |  8 +++--
 2 files changed, 43 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index a2dcf574d98..2c84717f952 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -640,6 +640,12 @@ static const struct clksel omap_96m_alwon_fck_clksel[] = {
 	{ .parent = NULL }
 };
 
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
 static struct clk omap_96m_alwon_fck = {
 	.name		= "omap_96m_alwon_fck",
 	.ops		= &clkops_null,
@@ -652,28 +658,38 @@ static struct clk omap_96m_alwon_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static struct clk omap_96m_fck = {
-	.name		= "omap_96m_fck",
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
-static const struct clksel cm_96m_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
 	{ .parent = NULL }
 };
 
-static struct clk cm_96m_fck = {
-	.name		= "cm_96m_fck",
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
 	.ops		= &clkops_null,
-	.parent		= &dpll4_m2x2_ck,
+	.parent		= &sys_ck,
 	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= cm_96m_fck_clksel,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
+	.clksel		= omap_96m_fck_clksel,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -742,13 +758,13 @@ static struct clk omap_54m_fck = {
 	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_54M,
+	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
 	.clksel		= omap_54m_clksel,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel_rate omap_48m_96md2_rates[] = {
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
 	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 0 }
 };
@@ -759,7 +775,7 @@ static const struct clksel_rate omap_48m_alt_rates[] = {
 };
 
 static const struct clksel omap_48m_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
 	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
 	{ .parent = NULL }
 };
@@ -769,7 +785,7 @@ static struct clk omap_48m_fck = {
 	.ops		= &clkops_null,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_48M,
+	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
 	.clksel		= omap_48m_clksel,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
@@ -958,10 +974,10 @@ static const struct clksel_rate clkout2_src_54m_rates[] = {
 };
 
 static const struct clksel clkout2_src_clksel[] = {
-	{ .parent = &core_ck,		  .rates = clkout2_src_core_rates },
-	{ .parent = &sys_ck,		  .rates = clkout2_src_sys_rates },
-	{ .parent = &omap_96m_alwon_fck,  .rates = clkout2_src_96m_rates },
-	{ .parent = &omap_54m_fck,	  .rates = clkout2_src_54m_rates },
+	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
+	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
 	{ .parent = NULL }
 };
 
@@ -2782,8 +2798,8 @@ static struct clk mcbsp4_ick = {
 };
 
 static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,  .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
 	{ .parent = NULL }
 };
 
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 219f5c8d965..a46f93c399d 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -449,8 +449,12 @@
 #define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
 #define OMAP3430_CORE_DPLL_DIV_SHIFT			8
 #define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
-#define OMAP3430_SOURCE_54M				(1 << 5)
-#define OMAP3430_SOURCE_48M				(1 << 3)
+#define OMAP3430_SOURCE_96M_SHIFT			6
+#define OMAP3430_SOURCE_96M_MASK			(1 << 6)
+#define OMAP3430_SOURCE_54M_SHIFT			5
+#define OMAP3430_SOURCE_54M_MASK			(1 << 5)
+#define OMAP3430_SOURCE_48M_SHIFT			3
+#define OMAP3430_SOURCE_48M_MASK			(1 << 3)
 
 /* CM_CLKSEL2_PLL */
 #define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
-- 
cgit v1.2.3


From 712d7c860269018fc92169e0f6b42218fd82a6d1 Mon Sep 17 00:00:00 2001
From: Daniel Stone <daniel.stone@nokia.com>
Date: Tue, 27 Jan 2009 19:13:05 -0700
Subject: [ARM] OMAP2: Fix definition of SGX clock register bits

The GFX/SGX functional and interface clocks have different masks, for
some unknown reason, so split EN_SGX_SHIFT into one each for fclk and
iclk.

Correct according to the TRM and the far more important 'does this
actually work at all?' metric.

linux-omap source commit is de1121fdb899f762b9e717f44eaf3fae7c00cd3e.

Signed-off-by: Daniel Stone <daniel.stone@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.h       | 4 ++--
 arch/arm/mach-omap2/cm-regbits-34xx.h | 8 ++++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 2c84717f952..6b39ad47633 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1293,7 +1293,7 @@ static struct clk sgx_fck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
 	.clksel		= sgx_clksel,
@@ -1307,7 +1307,7 @@ static struct clk sgx_ick = {
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
 	.clkdm_name	= "sgx_clkdm",
 	.recalc		= &followparent_recalc,
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index a46f93c399d..f3c327bac1c 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -332,8 +332,12 @@
 #define OMAP3430ES1_CLKACTIVITY_GFX_MASK		(1 << 0)
 
 /* CM_FCLKEN_SGX */
-#define OMAP3430ES2_EN_SGX_SHIFT			1
-#define OMAP3430ES2_EN_SGX_MASK				(1 << 1)
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
+
+/* CM_ICLKEN_SGX */
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
 
 /* CM_CLKSEL_SGX */
 #define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
-- 
cgit v1.2.3


From 6c8fe0b954b198d8e9116b824f7998c00f47c46c Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Tue, 27 Jan 2009 19:13:09 -0700
Subject: [ARM] OMAP: Add CSI2 clock struct for handling it with clock API

Add CSI2 clock struct for handling it with clock API when TI PM is disabled.

linux-omap source commit is 8b20f4498928459276bd3366e3381ad595d23432.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c       |  1 +
 arch/arm/mach-omap2/clock34xx.h       | 11 +++++++++++
 arch/arm/mach-omap2/cm-regbits-34xx.h |  2 ++
 3 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 439a66918d3..cb5e068feb5 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -206,6 +206,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 6b39ad47633..c265cdcc86a 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2198,6 +2198,17 @@ static struct clk cam_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk csi2_96m_fck = {
+	.name		= "csi2_96m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* USBHOST - 3430ES2 only */
 
 static struct clk usbhost_120m_fck = {
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index f3c327bac1c..aaf68a59800 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -524,6 +524,8 @@
 #define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
 
 /* CM_FCLKEN_CAM specific bits */
+#define OMAP3430_EN_CSI2				(1 << 1)
+#define OMAP3430_EN_CSI2_SHIFT				1
 
 /* CM_ICLKEN_CAM specific bits */
 
-- 
cgit v1.2.3


From ae8578c0194695bd37435249dfed720769a6bbf3 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:13:12 -0700
Subject: [ARM] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Filling the set_rate and round_rate fields of dpll4_m4_ck makes
this clock programmable through clk_set_rate().  This is needed
to give omapfb control over the dss1_alwon_fck rate.

This patch includes a fix from Tomi Valkeinen <tomi.valkeinen@nokia.com>.

linux-omap source commits are e42218d45afbc3e654e289e021e6b80c657b16c2 and
9d211b761b3cdf7736602ecf7e68f8a298c13278.

Signed-off-by: Måns Rullgård <mans@mansr.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c265cdcc86a..65929cc3740 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -811,6 +811,8 @@ static struct clk dpll4_m4_ck = {
 	.clksel		= div16_dpll4_clksel,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
-- 
cgit v1.2.3


From aeec299011da8c3f07a47fe5d988f0eafda53906 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@mvista.com>
Date: Tue, 27 Jan 2009 19:13:38 -0700
Subject: [ARM] OMAP2: Implement CPUfreq frequency table based on PRCM table

This patch adds a CPUfreq frequency-table implementation for OMAP2 by
walking the PRCM rate-table for available entries and adding them to a
CPUfreq table.

CPUfreq can then be used to manage switching between all the available
entries in the PRCM rate table.  Either use the CPUfreq sysfs
interface directly, (see Section 3 of Documentation/cpu-freq/user-guide.txt)
or use the cpufrequtils package:
http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html

Signed-off-by: Kevin Hilman <khilman@mvista.com>

Updated to try to use cpufreq_table if it exists.

linux-omap source commit is 77ce544fa48deb7a2003f454624e3ca10d37ab87.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c         | 42 ++++++++++++++++++++++++
 arch/arm/plat-omap/cpu-omap.c           | 57 ++++++++++++++++++++++++++++++---
 arch/arm/plat-omap/include/mach/clock.h |  3 ++
 3 files changed, 98 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 421728a7f90..b9902666e4b 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -574,6 +574,45 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ */
+static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	struct prcm_config *prcm;
+	int i = 0;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
+	if (i == 0) {
+		printk(KERN_WARNING "%s: failed to initialize frequency "
+		       "table\n", __func__);
+		return;
+	}
+
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+}
+#endif
+
 static struct clk_functions omap2_clk_functions = {
 	.clk_enable		= omap2_clk_enable,
 	.clk_disable		= omap2_clk_disable,
@@ -581,6 +620,9 @@ static struct clk_functions omap2_clk_functions = {
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
 	.clk_disable_unused	= omap2_clk_disable_unused,
+#ifdef	CONFIG_CPU_FREQ
+	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+#endif
 };
 
 static u32 omap2_get_apll_clkin(void)
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index b2690242a39..843e8af6406 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,10 +23,13 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
 
+static struct cpufreq_frequency_table *freq_table;
+
 #ifdef CONFIG_ARCH_OMAP1
 #define MPU_CLK		"mpu"
 #else
@@ -39,6 +42,9 @@ static struct clk *mpu_clk;
 
 int omap_verify_speed(struct cpufreq_policy *policy)
 {
+	if (freq_table)
+		return cpufreq_frequency_table_verify(policy, freq_table);
+
 	if (policy->cpu)
 		return -EINVAL;
 
@@ -70,12 +76,26 @@ static int omap_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 	int ret = 0;
 
+	/* Ensure desired rate is within allowed range.  Some govenors
+	 * (ondemand) will just pass target_freq=0 to get the minimum. */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
 	freqs.cpu = 0;
 
+	if (freqs.old == freqs.new)
+		return ret;
+
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	ret = clk_set_rate(mpu_clk, target_freq * 1000);
+#ifdef CONFIG_CPU_FREQ_DEBUG
+	printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
+	       freqs.old, freqs.new);
+#endif
+	ret = clk_set_rate(mpu_clk, freqs.new * 1000);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
@@ -83,16 +103,31 @@ static int omap_target(struct cpufreq_policy *policy,
 
 static int __init omap_cpu_init(struct cpufreq_policy *policy)
 {
+	int result = 0;
+
 	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
 
 	if (policy->cpu != 0)
 		return -EINVAL;
+
 	policy->cur = policy->min = policy->max = omap_getspeed(0);
-	policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
-	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+	clk_init_cpufreq_table(&freq_table);
+	if (freq_table) {
+		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		if (!result)
+			cpufreq_frequency_table_get_attr(freq_table,
+							policy->cpu);
+	} else {
+		policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
+		policy->cpuinfo.max_freq = clk_round_rate(mpu_clk,
+							VERY_HI_RATE) / 1000;
+	}
+
+	/* FIXME: what's the actual transition time? */
+	policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
 
 	return 0;
 }
@@ -103,6 +138,11 @@ static int omap_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
+static struct freq_attr *omap_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
 static struct cpufreq_driver omap_driver = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= omap_verify_speed,
@@ -111,6 +151,7 @@ static struct cpufreq_driver omap_driver = {
 	.init		= omap_cpu_init,
 	.exit		= omap_cpu_exit,
 	.name		= "omap",
+	.attr		= omap_cpufreq_attr,
 };
 
 static int __init omap_cpufreq_init(void)
@@ -119,3 +160,11 @@ static int __init omap_cpufreq_init(void)
 }
 
 arch_initcall(omap_cpufreq_init);
+
+/*
+ * if ever we want to remove this, upon cleanup call:
+ *
+ * cpufreq_unregister_driver()
+ * cpufreq_frequency_table_put_attr()
+ */
+
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 6f49a333289..681c65105e2 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -121,6 +121,9 @@ extern void recalculate_root_clocks(void);
 extern void followparent_recalc(struct clk *clk);
 extern int clk_get_usecount(struct clk *clk);
 extern void clk_enable_init_clocks(void);
+#ifdef CONFIG_CPU_FREQ
+extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+#endif
 
 extern const struct clkops clkops_null;
 
-- 
cgit v1.2.3


From 5b74c67660dbd536a4f4e8cea12d10683ad2e432 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 3 Feb 2009 02:10:03 -0700
Subject: [ARM] OMAP2/3 clockdomains: combine pwrdm, pwrdm_name into union in
 struct clockdomain

struct clockdomain contains a struct powerdomain *pwrdm and const char
*pwrdm_name.  The pwrdm_name is only used at initialization to look up
the appropriate pwrdm pointer.  Combining these into a union saves
about 100 bytes on 3430SDP.  This patch should not cause any change in
kernel function.

Updated to gracefully handle autodeps that contain invalid powerdomains,
per Russell King's review comments.

Boot-tested on BeagleBoard ES2.1.

linux-omap source commit is 718fc6cd4db902aa2242a736cc3feb8744a4c71a.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomain.c             | 59 ++++++++++++++-------------
 arch/arm/mach-omap2/clockdomains.h            | 54 ++++++++++++------------
 arch/arm/plat-omap/include/mach/clockdomain.h | 24 ++++++-----
 3 files changed, 72 insertions(+), 65 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4c3ce9cfd94..e9b4f6c564e 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/limits.h>
+#include <linux/err.h>
 
 #include <linux/io.h>
 
@@ -71,14 +72,14 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
 	if (!omap_chip_is(autodep->omap_chip))
 		return;
 
-	pwrdm = pwrdm_lookup(autodep->pwrdm_name);
+	pwrdm = pwrdm_lookup(autodep->pwrdm.name);
 	if (!pwrdm) {
 		pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
-			 "does not exist\n", autodep->pwrdm_name);
+			 "does not exist\n", autodep->pwrdm.name);
 		WARN_ON(1);
-		return;
+		pwrdm = ERR_PTR(-ENOENT);
 	}
-	autodep->pwrdm = pwrdm;
+	autodep->pwrdm.ptr = pwrdm;
 
 	return;
 }
@@ -95,16 +96,16 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm)
 {
 	struct clkdm_pwrdm_autodep *autodep;
 
-	for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
-		if (!autodep->pwrdm)
+	for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+		if (IS_ERR(autodep->pwrdm.ptr))
 			continue;
 
 		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-			 "pwrdm %s\n", autodep->pwrdm_name,
-			 clkdm->pwrdm->name);
+			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
+			 clkdm->pwrdm.ptr->name);
 
-		pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm);
-		pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm);
+		pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+		pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
 	}
 }
 
@@ -120,16 +121,16 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 {
 	struct clkdm_pwrdm_autodep *autodep;
 
-	for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
-		if (!autodep->pwrdm)
+	for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+		if (IS_ERR(autodep->pwrdm.ptr))
 			continue;
 
 		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-			 "pwrdm %s\n", autodep->pwrdm_name,
-			 clkdm->pwrdm->name);
+			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
+			 clkdm->pwrdm.ptr->name);
 
-		pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm);
-		pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm);
+		pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+		pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
 	}
 }
 
@@ -179,7 +180,7 @@ void clkdm_init(struct clockdomain **clkdms,
 
 	autodeps = init_autodeps;
 	if (autodeps)
-		for (autodep = autodeps; autodep->pwrdm_name; autodep++)
+		for (autodep = autodeps; autodep->pwrdm.ptr; autodep++)
 			_autodep_lookup(autodep);
 }
 
@@ -202,13 +203,13 @@ int clkdm_register(struct clockdomain *clkdm)
 	if (!omap_chip_is(clkdm->omap_chip))
 		return -EINVAL;
 
-	pwrdm = pwrdm_lookup(clkdm->pwrdm_name);
+	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
 	if (!pwrdm) {
 		pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
-			 "does not exist\n", clkdm->name, clkdm->pwrdm_name);
+			 "does not exist\n", clkdm->name, clkdm->pwrdm.name);
 		return -EINVAL;
 	}
-	clkdm->pwrdm = pwrdm;
+	clkdm->pwrdm.ptr = pwrdm;
 
 	mutex_lock(&clkdm_mutex);
 	/* Verify that the clockdomain is not already registered */
@@ -242,7 +243,7 @@ int clkdm_unregister(struct clockdomain *clkdm)
 	if (!clkdm)
 		return -EINVAL;
 
-	pwrdm_del_clkdm(clkdm->pwrdm, clkdm);
+	pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm);
 
 	mutex_lock(&clkdm_mutex);
 	list_del(&clkdm->node);
@@ -327,7 +328,7 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
 	if (!clkdm)
 		return NULL;
 
-	return clkdm->pwrdm;
+	return clkdm->pwrdm.ptr;
 }
 
 
@@ -348,7 +349,7 @@ static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
 	if (!clkdm)
 		return -EINVAL;
 
-	v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+	v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 	v &= clkdm->clktrctrl_mask;
 	v >>= __ffs(clkdm->clktrctrl_mask);
 
@@ -380,7 +381,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 	if (cpu_is_omap24xx()) {
 
 		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
-				    clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+				    clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
 
 	} else if (cpu_is_omap34xx()) {
 
@@ -388,7 +389,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 			 __ffs(clkdm->clktrctrl_mask));
 
 		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
-				    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+				    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 
 	} else {
 		BUG();
@@ -422,7 +423,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 	if (cpu_is_omap24xx()) {
 
 		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
-				      clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+				      clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
 
 	} else if (cpu_is_omap34xx()) {
 
@@ -430,7 +431,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 			 __ffs(clkdm->clktrctrl_mask));
 
 		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
-				    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+				    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 
 	} else {
 		BUG();
@@ -478,7 +479,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 
 	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
 			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm->prcm_offs,
+			    clkdm->pwrdm.ptr->prcm_offs,
 			    CM_CLKSTCTRL);
 }
 
@@ -516,7 +517,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 
 	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
 			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
 
 	if (atomic_read(&clkdm->usecount) > 0)
 		_clkdm_del_autodeps(clkdm);
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index cd86dcc7b42..e17c3693542 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -19,7 +19,7 @@
 /* This is an implicit clockdomain - it is never defined as such in TRM */
 static struct clockdomain wkup_clkdm = {
 	.name		= "wkup_clkdm",
-	.pwrdm_name	= "wkup_pwrdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
@@ -31,7 +31,7 @@ static struct clockdomain wkup_clkdm = {
 
 static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
-	.pwrdm_name	= "mpu_pwrdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -39,7 +39,7 @@ static struct clockdomain mpu_2420_clkdm = {
 
 static struct clockdomain iva1_2420_clkdm = {
 	.name		= "iva1_clkdm",
-	.pwrdm_name	= "dsp_pwrdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -56,7 +56,7 @@ static struct clockdomain iva1_2420_clkdm = {
 
 static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
-	.pwrdm_name	= "mpu_pwrdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -64,7 +64,7 @@ static struct clockdomain mpu_2430_clkdm = {
 
 static struct clockdomain mdm_clkdm = {
 	.name		= "mdm_clkdm",
-	.pwrdm_name	= "mdm_pwrdm",
+	.pwrdm		= { .name = "mdm_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -81,7 +81,7 @@ static struct clockdomain mdm_clkdm = {
 
 static struct clockdomain dsp_clkdm = {
 	.name		= "dsp_clkdm",
-	.pwrdm_name	= "dsp_pwrdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -89,7 +89,7 @@ static struct clockdomain dsp_clkdm = {
 
 static struct clockdomain gfx_24xx_clkdm = {
 	.name		= "gfx_clkdm",
-	.pwrdm_name	= "gfx_pwrdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -97,7 +97,7 @@ static struct clockdomain gfx_24xx_clkdm = {
 
 static struct clockdomain core_l3_24xx_clkdm = {
 	.name		= "core_l3_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -105,7 +105,7 @@ static struct clockdomain core_l3_24xx_clkdm = {
 
 static struct clockdomain core_l4_24xx_clkdm = {
 	.name		= "core_l4_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -113,7 +113,7 @@ static struct clockdomain core_l4_24xx_clkdm = {
 
 static struct clockdomain dss_24xx_clkdm = {
 	.name		= "dss_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -130,7 +130,7 @@ static struct clockdomain dss_24xx_clkdm = {
 
 static struct clockdomain mpu_34xx_clkdm = {
 	.name		= "mpu_clkdm",
-	.pwrdm_name	= "mpu_pwrdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -138,7 +138,7 @@ static struct clockdomain mpu_34xx_clkdm = {
 
 static struct clockdomain neon_clkdm = {
 	.name		= "neon_clkdm",
-	.pwrdm_name	= "neon_pwrdm",
+	.pwrdm		= { .name = "neon_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -146,7 +146,7 @@ static struct clockdomain neon_clkdm = {
 
 static struct clockdomain iva2_clkdm = {
 	.name		= "iva2_clkdm",
-	.pwrdm_name	= "iva2_pwrdm",
+	.pwrdm		= { .name = "iva2_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -154,7 +154,7 @@ static struct clockdomain iva2_clkdm = {
 
 static struct clockdomain gfx_3430es1_clkdm = {
 	.name		= "gfx_clkdm",
-	.pwrdm_name	= "gfx_pwrdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
@@ -162,7 +162,7 @@ static struct clockdomain gfx_3430es1_clkdm = {
 
 static struct clockdomain sgx_clkdm = {
 	.name		= "sgx_clkdm",
-	.pwrdm_name	= "sgx_pwrdm",
+	.pwrdm		= { .name = "sgx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
@@ -177,7 +177,7 @@ static struct clockdomain sgx_clkdm = {
  */
 static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -185,7 +185,7 @@ static struct clockdomain d2d_clkdm = {
 
 static struct clockdomain core_l3_34xx_clkdm = {
 	.name		= "core_l3_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -193,7 +193,7 @@ static struct clockdomain core_l3_34xx_clkdm = {
 
 static struct clockdomain core_l4_34xx_clkdm = {
 	.name		= "core_l4_clkdm",
-	.pwrdm_name	= "core_pwrdm",
+	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -201,7 +201,7 @@ static struct clockdomain core_l4_34xx_clkdm = {
 
 static struct clockdomain dss_34xx_clkdm = {
 	.name		= "dss_clkdm",
-	.pwrdm_name	= "dss_pwrdm",
+	.pwrdm		= { .name = "dss_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -209,7 +209,7 @@ static struct clockdomain dss_34xx_clkdm = {
 
 static struct clockdomain cam_clkdm = {
 	.name		= "cam_clkdm",
-	.pwrdm_name	= "cam_pwrdm",
+	.pwrdm		= { .name = "cam_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -217,7 +217,7 @@ static struct clockdomain cam_clkdm = {
 
 static struct clockdomain usbhost_clkdm = {
 	.name		= "usbhost_clkdm",
-	.pwrdm_name	= "usbhost_pwrdm",
+	.pwrdm		= { .name = "usbhost_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
@@ -225,7 +225,7 @@ static struct clockdomain usbhost_clkdm = {
 
 static struct clockdomain per_clkdm = {
 	.name		= "per_clkdm",
-	.pwrdm_name	= "per_pwrdm",
+	.pwrdm		= { .name = "per_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -233,7 +233,7 @@ static struct clockdomain per_clkdm = {
 
 static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
-	.pwrdm_name	= "emu_pwrdm",
+	.pwrdm		= { .name = "emu_pwrdm" },
 	.flags		= CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -247,14 +247,16 @@ static struct clockdomain emu_clkdm = {
 
 static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
 	{
-		.pwrdm_name = "mpu_pwrdm",
+		.pwrdm	   = { .name = "mpu_pwrdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
 	{
-		.pwrdm_name = "iva2_pwrdm",
+		.pwrdm	   = { .name = "iva2_pwrdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
-	{ NULL }
+	{
+		.pwrdm	   = { .name = NULL },
+	}
 };
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
index 1f51f017378..b9d0dd2da89 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-omap/clockdomain.h
+ * arch/arm/plat-omap/include/mach/clockdomain.h
  *
  * OMAP2/3 clockdomain framework functions
  *
@@ -48,11 +48,13 @@
  */
 struct clkdm_pwrdm_autodep {
 
-	/* Name of the powerdomain to add a wkdep/sleepdep on */
-	const char *pwrdm_name;
+	union {
+		/* Name of the powerdomain to add a wkdep/sleepdep on */
+		const char *name;
 
-	/* Powerdomain pointer (looked up at clkdm_init() time) */
-	struct powerdomain *pwrdm;
+		/* Powerdomain pointer (looked up at clkdm_init() time) */
+		struct powerdomain *ptr;
+	} pwrdm;
 
 	/* OMAP chip types that this clockdomain dep is valid on */
 	const struct omap_chip_id omap_chip;
@@ -64,8 +66,13 @@ struct clockdomain {
 	/* Clockdomain name */
 	const char *name;
 
-	/* Powerdomain enclosing this clockdomain */
-	const char *pwrdm_name;
+	union {
+		/* Powerdomain enclosing this clockdomain */
+		const char *name;
+
+		/* Powerdomain pointer assigned at clkdm_register() */
+		struct powerdomain *ptr;
+	} pwrdm;
 
 	/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
 	const u16 clktrctrl_mask;
@@ -79,9 +86,6 @@ struct clockdomain {
 	/* Usecount tracking */
 	atomic_t usecount;
 
-	/* Powerdomain pointer assigned at clkdm_register() */
-	struct powerdomain *pwrdm;
-
 	struct list_head node;
 
 };
-- 
cgit v1.2.3


From d37f1a136783aa9c9b1a6cd832a60cb2bbd2453a Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 10 Sep 2008 10:47:36 -0600
Subject: [ARM] OMAP2/3 clockdomains: add CM and PRM clkdms

Add clockdomains for the CM and PRM.  These will ultimately replace the
"wkup_clkdm", which appears to not actually exist on the hardware.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomains.h            | 19 +++++++++++++++++++
 arch/arm/plat-omap/include/mach/powerdomain.h |  4 ++--
 2 files changed, 21 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index e17c3693542..ec5a7209099 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -14,6 +14,11 @@
 
 /*
  * OMAP2/3-common clockdomains
+ *
+ * Even though the 2420 has a single PRCM module from the
+ * interconnect's perspective, internally it does appear to have
+ * separate PRM and CM clockdomains.  The usual test case is
+ * sys_clkout/sys_clkout2.
  */
 
 /* This is an implicit clockdomain - it is never defined as such in TRM */
@@ -23,6 +28,18 @@ static struct clockdomain wkup_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
+static struct clockdomain prm_clkdm = {
+	.name		= "prm_clkdm",
+	.pwrdm		= { .name = "wkup_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cm_clkdm = {
+	.name		= "cm_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
 /*
  * 2420-only clockdomains
  */
@@ -266,6 +283,8 @@ static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
 static struct clockdomain *clockdomains_omap[] = {
 
 	&wkup_clkdm,
+	&cm_clkdm,
+	&prm_clkdm,
 
 #ifdef CONFIG_ARCH_OMAP2420
 	&mpu_2420_clkdm,
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 4948cb7af5b..69c9e675d8e 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -50,9 +50,9 @@
 
 /*
  * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain is probably the worst case.
+ * CORE powerdomain on OMAP3 is the worst case
  */
-#define PWRDM_MAX_CLKDMS	3
+#define PWRDM_MAX_CLKDMS	4
 
 /* XXX A completely arbitrary number. What is reasonable here? */
 #define PWRDM_TRANSITION_BAILOUT 100000
-- 
cgit v1.2.3


From 15b52bc4cb2b4cc93047b957a6c7b9dbd910a6fa Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 7 May 2008 19:19:07 -0600
Subject: [ARM] OMAP3 clock: move sys_clkout2 clk to core_clkdm

sys_clkout2 belongs in the core_clkdm (3430 TRM section 4.7.2.2).
It's not clear whether it actually is in the CORE clockdomain, or whether
it is technically in a different clockdomain; but this is closer to
reality than the present configuration.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 65929cc3740..baed53f6952 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -993,6 +993,7 @@ static struct clk clkout2_src_ck = {
 	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
 	.clksel		= clkout2_src_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "core_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
-- 
cgit v1.2.3


From 46e0ccf8ae32e53dc34a274977e2c6256b2deddc Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:44:18 -0700
Subject: [ARM] OMAP3 PRCM: add DPLL1-5 powerdomains, clockdomains; mark clocks

Each DPLL exists in its own powerdomain (cf 34xx TRM figure 4-18) and
clockdomain; so, create powerdomain and clockdomain structures for them.
Mark each DPLL clock as belonging to their respective DPLL clockdomain.
cf. 34xx TRM Table 4-27 (among other references).

linux-omap source commits are acdb615850b9b4f7d1ab68133a16be8c8c0e7419 and
a8798a48f33e9268dcc7f30a4b4a3ce4220fe0c9.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.h        | 27 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/clockdomains.h     | 35 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/powerdomains.h     |  5 +++++
 arch/arm/mach-omap2/powerdomains34xx.h | 31 ++++++++++++++++++++++++++++++
 4 files changed, 98 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index baed53f6952..9dec69860ba 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -280,6 +280,7 @@ static struct clk dpll1_ck = {
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -292,6 +293,7 @@ static struct clk dpll1_x2_ck = {
 	.ops		= &clkops_null,
 	.parent		= &dpll1_ck,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -314,6 +316,7 @@ static struct clk dpll1_x2m2_ck = {
 	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll1_x2m2_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -350,6 +353,7 @@ static struct clk dpll2_ck = {
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll2_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -372,6 +376,7 @@ static struct clk dpll2_m2_ck = {
 	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll2_m2x2_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll2_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -404,6 +409,7 @@ static struct clk dpll3_ck = {
 	.dpll_data	= &dpll3_dd,
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -416,6 +422,7 @@ static struct clk dpll3_x2_ck = {
 	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -473,6 +480,7 @@ static struct clk dpll3_m2_ck = {
 	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div31_dpll3m2_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -507,6 +515,7 @@ static struct clk dpll3_m2x2_ck = {
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -526,6 +535,7 @@ static struct clk dpll3_m3_ck = {
 	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
 	.clksel		= div16_dpll3_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -537,6 +547,7 @@ static struct clk dpll3_m3x2_ck = {
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
 	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -555,6 +566,7 @@ static struct clk emu_core_alwon_ck = {
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -589,6 +601,7 @@ static struct clk dpll4_ck = {
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_dpll4_set_rate,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -602,6 +615,7 @@ static struct clk dpll4_x2_ck = {
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -620,6 +634,7 @@ static struct clk dpll4_m2_ck = {
 	.clksel_mask	= OMAP3430_DIV_96M_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -631,6 +646,7 @@ static struct clk dpll4_m2x2_ck = {
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
 	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -704,6 +720,7 @@ static struct clk dpll4_m3_ck = {
 	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -716,6 +733,7 @@ static struct clk dpll4_m3x2_ck = {
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
 	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -810,6 +828,7 @@ static struct clk dpll4_m4_ck = {
 	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 	.set_rate	= &omap2_clksel_set_rate,
 	.round_rate	= &omap2_clksel_round_rate,
@@ -823,6 +842,7 @@ static struct clk dpll4_m4x2_ck = {
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
 	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -836,6 +856,7 @@ static struct clk dpll4_m5_ck = {
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -847,6 +868,7 @@ static struct clk dpll4_m5x2_ck = {
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
 	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -860,6 +882,7 @@ static struct clk dpll4_m6_ck = {
 	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -872,6 +895,7 @@ static struct clk dpll4_m6x2_ck = {
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
 	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
@@ -880,6 +904,7 @@ static struct clk emu_per_alwon_ck = {
 	.ops		= &clkops_null,
 	.parent		= &dpll4_m6x2_ck,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -915,6 +940,7 @@ static struct clk dpll5_ck = {
 	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll5_clkdm",
 	.recalc		= &omap3_dpll_recalc,
 };
 
@@ -932,6 +958,7 @@ static struct clk dpll5_m2_ck = {
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
 	.flags		= RATE_PROPAGATES,
+	.clkdm_name	= "dpll5_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index ec5a7209099..9eb73432810 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -256,6 +256,36 @@ static struct clockdomain emu_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+static struct clockdomain dpll1_clkdm = {
+	.name		= "dpll1_clkdm",
+	.pwrdm		= { .name = "dpll1_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll2_clkdm = {
+	.name		= "dpll2_clkdm",
+	.pwrdm		= { .name = "dpll2_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll3_clkdm = {
+	.name		= "dpll3_clkdm",
+	.pwrdm		= { .name = "dpll3_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll4_clkdm = {
+	.name		= "dpll4_clkdm",
+	.pwrdm		= { .name = "dpll4_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll5_clkdm = {
+	.name		= "dpll5_clkdm",
+	.pwrdm		= { .name = "dpll5_pwrdm" },
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+};
+
 #endif   /* CONFIG_ARCH_OMAP34XX */
 
 /*
@@ -318,6 +348,11 @@ static struct clockdomain *clockdomains_omap[] = {
 	&usbhost_clkdm,
 	&per_clkdm,
 	&emu_clkdm,
+	&dpll1_clkdm,
+	&dpll2_clkdm,
+	&dpll3_clkdm,
+	&dpll4_clkdm,
+	&dpll5_clkdm,
 #endif
 
 	NULL,
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 1e151faebbd..1329443f2cd 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -178,6 +178,11 @@ static struct powerdomain *powerdomains_omap[] __initdata = {
 	&emu_pwrdm,
 	&sgx_pwrdm,
 	&usbhost_pwrdm,
+	&dpll1_pwrdm,
+	&dpll2_pwrdm,
+	&dpll3_pwrdm,
+	&dpll4_pwrdm,
+	&dpll5_pwrdm,
 #endif
 
 	NULL
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 3a8e4fbea5f..7b63fa074b7 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -322,6 +322,37 @@ static struct powerdomain usbhost_pwrdm = {
 	},
 };
 
+static struct powerdomain dpll1_pwrdm = {
+	.name		= "dpll1_pwrdm",
+	.prcm_offs	= MPU_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll2_pwrdm = {
+	.name		= "dpll2_pwrdm",
+	.prcm_offs	= OMAP3430_IVA2_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll3_pwrdm = {
+	.name		= "dpll3_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll4_pwrdm = {
+	.name		= "dpll4_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll5_pwrdm = {
+	.name		= "dpll5_pwrdm",
+	.prcm_offs	= PLL_MOD,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+};
+
+
 #endif    /* CONFIG_ARCH_OMAP34XX */
 
 
-- 
cgit v1.2.3


From be48ea74d49408c5c4f999c730d35eaf0034f273 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:44:28 -0700
Subject: [ARM] OMAP3 powerdomains: remove RET from SGX power states list

The SGX device on OMAP3 does not support retention, so remove RET from the
list of possible SGX power states.  Problem debugged by Richard Woodruff
<r-woodruff2@ti.com>.

Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/powerdomains34xx.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 7b63fa074b7..15c346c627d 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -236,6 +236,11 @@ static struct powerdomain dss_pwrdm = {
 	},
 };
 
+/*
+ * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
+ * possible SGX powerstate, the SGX device itself does not support
+ * retention.
+ */
 static struct powerdomain sgx_pwrdm = {
 	.name		  = "sgx_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
@@ -243,7 +248,7 @@ static struct powerdomain sgx_pwrdm = {
 	.wkdep_srcs	  = gfx_sgx_wkdeps,
 	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	/* XXX This is accurate for 3430 SGX, but what about GFX? */
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
-- 
cgit v1.2.3


From 054ce503ae335dbc8610ef5aa0852c0c090023fe Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Date: Tue, 27 Jan 2009 19:44:31 -0700
Subject: [ARM] OMAP: wait for pwrdm transition after clk_enable()

Enabling clock in a disabled power domain causes the power domain to be
turned on. However, the power transition is not always finished when
clk_enable() returns and this randomly crashes the kernel when an
interrupt happens right after the clk_enable, and the kernel tries to
read the irq status register for that domain.

Why the irq status register is inaccessible, I don't know. Also it
doesn't seem to be related to the module being not powered up, but to
the transition itself.

The same could perhaps happen after clk_disable also, but I have not
witnessed that.

The problem affects at least dss, cam and sgx clocks.

This change waits for the transition to be finished before returning
from omap2_clkdm_clk_enable().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomain.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index e9b4f6c564e..c9c367c3967 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -568,6 +568,8 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	else
 		omap2_clkdm_wakeup(clkdm);
 
+	pwrdm_wait_transition(clkdm->pwrdm.ptr);
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From d96df00d6dfd2482fb23ef7aabcaa36e6dce4d1c Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 27 Jan 2009 19:44:35 -0700
Subject: [ARM] OMAP2/3 clockdomains: autodeps should respect platform flags

Fix the clockdomain autodep code to respect omap_chip platform flags.

Resolves "Unable to handle kernel paging request at virtual address
5f75706d" panic during power management initialization on OMAP2.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomain.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index c9c367c3967..ae0c53abb55 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -100,6 +100,9 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->pwrdm.ptr))
 			continue;
 
+		if (!omap_chip_is(autodep->omap_chip))
+			continue;
+
 		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
 			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
 			 clkdm->pwrdm.ptr->name);
@@ -125,6 +128,9 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->pwrdm.ptr))
 			continue;
 
+		if (!omap_chip_is(autodep->omap_chip))
+			continue;
+
 		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
 			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
 			 clkdm->pwrdm.ptr->name);
-- 
cgit v1.2.3


From f266950d0234599cc6d4a5602e43d0fb782de1d2 Mon Sep 17 00:00:00 2001
From: Jouni Hogander <jouni.hogander@nokia.com>
Date: Tue, 27 Jan 2009 19:44:38 -0700
Subject: [ARM] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti
 is in use

Using sdti doesn't keep emu_pwrdm on if hardware supervised pwrdm
transitions are used. This causes sdti stop to work when power
management is initialized and hardware supervised pwrdm control is
enabled. This patch disables hardware supervised pwrdm control for
emu_pwrdm. Now emu_pwrdm is switched off on boot by software when it
is not used.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomains.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 9eb73432810..d7db796403d 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -248,10 +248,14 @@ static struct clockdomain per_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
 static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
-	.flags		= CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
-- 
cgit v1.2.3


From f0587b63c24e0c7539c6e77f1bfc68e6053608c7 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:11 -0700
Subject: [ARM] OMAP3 clock: fix DPLL jitter correction and rate programming

Fix DPLL jitter correction programming.  Previously,
omap3_noncore_dpll_program() stored the FREQSEL jitter correction
parameter to the wrong register.  This caused jitter correction to be set
incorrectly and also caused the DPLL divider to be programmed incorrectly.

Also, fix DPLL divider programming.  An off-by-one error existed in
omap3_noncore_dpll_program(), causing DPLLs to be programmed with a higher
divider than intended.

linux-omap source commit is 5c0ec88a2145cdf2f2c9cc5fae49635c4c2476c7.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index cb5e068feb5..fdfc7d58291 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -563,14 +563,17 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
 	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
 	_omap3_noncore_dpll_bypass(clk);
 
+	/* Set jitter correction */
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->freqsel_mask;
+	v |= freqsel << __ffs(dd->freqsel_mask);
+	__raw_writel(v, dd->control_reg);
+
+	/* Set DPLL multiplier, divider */
 	v = __raw_readl(dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
-
-	/* Set mult (M), div1 (N), freqsel */
 	v |= m << __ffs(dd->mult_mask);
-	v |= n << __ffs(dd->div1_mask);
-	v |= freqsel << __ffs(dd->freqsel_mask);
-
+	v |= (n - 1) << __ffs(dd->div1_mask);
 	__raw_writel(v, dd->mult_div1_reg);
 
 	/* We let the clock framework set the other output dividers later */
-- 
cgit v1.2.3


From b8168d1e3989bc141da6bba87ad49e218ff04658 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:14 -0700
Subject: [ARM] OMAP3 clock: DPLL{1,2}_FCLK clksel can divide by 4

OMAP34xx ES2 TRM Delta G to H states that the divider for DPLL1_FCLK and
DPLL2_FCLK can divide by 4 in addition to dividing by 1 and 2. Encode this
into the OMAP3 clock framework.

linux-omap source commit is 050684c18f2ea0b08fdd5233a0cd3c7f96e00a0e.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.h | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9dec69860ba..f8088c0ec01 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1060,8 +1060,15 @@ static struct clk corex2_fck = {
 
 /* DPLL power domain clock controls */
 
-static const struct clksel div2_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div2_rates },
+static const struct clksel_rate div4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div4_rates },
 	{ .parent = NULL }
 };
 
@@ -1076,7 +1083,7 @@ static struct clk dpll1_fck = {
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
-	.clksel		= div2_core_clksel,
+	.clksel		= div4_core_clksel,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1151,7 +1158,7 @@ static struct clk dpll2_fck = {
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
-	.clksel		= div2_core_clksel,
+	.clksel		= div4_core_clksel,
 	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1187,6 +1194,11 @@ static struct clk iva2_ck = {
 
 /* Common interface clocks */
 
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
 static struct clk l3_ick = {
 	.name		= "l3_ick",
 	.ops		= &clkops_null,
-- 
cgit v1.2.3


From c1bd7aaf678a7e35086520e284d5b44bc69b6599 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:17 -0700
Subject: [ARM] OMAP3 clock: convert dpll_data.idlest_bit to idlest_mask

Convert struct dpll_data.idlest_bit field to idlest_mask.  Needed since
OMAP2 uses two bits for DPLL IDLEST rather than one.

While here, add the missing idlest_* fields for DPLL3.

linux-omap source commits are 25bab0f176b0a97be18a1b38153f266c3a155784
and b0f7fd17db2aaf8e6e9a2732ae3f4de0874db01c.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c         |  6 ++----
 arch/arm/mach-omap2/clock34xx.h         | 10 ++++++----
 arch/arm/plat-omap/include/mach/clock.h |  2 +-
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fdfc7d58291..aad77e0d43c 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -314,14 +314,12 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	const struct dpll_data *dd;
 	int i = 0;
 	int ret = -EINVAL;
-	u32 idlest_mask;
 
 	dd = clk->dpll_data;
 
-	state <<= dd->idlest_bit;
-	idlest_mask = 1 << dd->idlest_bit;
+	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
+	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index f8088c0ec01..7ee13120262 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -266,7 +266,7 @@ static struct dpll_data dpll1_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
 	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_bit	= OMAP3430_ST_MPU_CLK_SHIFT,
+	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
@@ -339,7 +339,7 @@ static struct dpll_data dpll2_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
 	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_bit	= OMAP3430_ST_IVA2_CLK_SHIFT,
+	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
@@ -397,6 +397,8 @@ static struct dpll_data dpll3_dd = {
 	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
 	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
 	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
@@ -587,7 +589,7 @@ static struct dpll_data dpll4_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
 	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_bit	= OMAP3430_ST_PERIPH_CLK_SHIFT,
+	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
@@ -926,7 +928,7 @@ static struct dpll_data dpll5_dd = {
 	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
 	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.idlest_bit	= OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 681c65105e2..611df52a324 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -54,10 +54,10 @@ struct dpll_data {
 	u32			enable_mask;
 	u32			autoidle_mask;
 	u32			freqsel_mask;
+	u32			idlest_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
-	u8			idlest_bit;
 #  endif
 };
 
-- 
cgit v1.2.3


From b32450409847dddf060a468707212d3493df4f63 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:38 -0700
Subject: [ARM] OMAP3 clock: remove unnecessary dpll_data dereferences

Remove some clutter from omap2_dpll_round_rate().

linux-omap source commit is 4625dceb8583c02a6d67ededc9f6a8347b6b8cb7.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 886f73f3933..2f0eaaad481 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -877,19 +877,22 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	int m, n, r, e, scaled_max_m;
 	unsigned long scaled_rt_rp, new_rate;
 	int min_e = -1, min_e_m = -1, min_e_n = -1;
+	struct dpll_data *dd;
 
 	if (!clk || !clk->dpll_data)
 		return ~0;
 
+	dd = clk->dpll_data;
+
 	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
 		 "%ld\n", clk->name, target_rate);
 
 	scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
-	clk->dpll_data->last_rounded_rate = 0;
+	dd->last_rounded_rate = 0;
 
-	for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+	for (n = dd->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
 
 		/* Compute the scaled DPLL multiplier, based on the divider */
 		m = scaled_rt_rp * n;
@@ -909,7 +912,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			 "(new_rate = %ld)\n", n, m, e, new_rate);
 
 		if (min_e == -1 ||
-		    min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
 			min_e = e;
 			min_e_m = m;
 			min_e_n = n;
@@ -932,17 +935,17 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 		return ~0;
 	}
 
-	clk->dpll_data->last_rounded_m = min_e_m;
-	clk->dpll_data->last_rounded_n = min_e_n;
-	clk->dpll_data->last_rounded_rate =
-		_dpll_compute_new_rate(clk->parent->rate, min_e_m,  min_e_n);
+	dd->last_rounded_m = min_e_m;
+	dd->last_rounded_n = min_e_n;
+	dd->last_rounded_rate = _dpll_compute_new_rate(clk->parent->rate,
+						       min_e_m,  min_e_n);
 
 	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
 		 min_e, min_e_m, min_e_n);
 	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
-		 clk->dpll_data->last_rounded_rate, target_rate);
+		 dd->last_rounded_rate, target_rate);
 
-	return clk->dpll_data->last_rounded_rate;
+	return dd->last_rounded_rate;
 }
 
 /*-------------------------------------------------------------------------
-- 
cgit v1.2.3


From 85a5f78d2b15a2e73b6486a24b77bb3ab67d5bbc Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:41 -0700
Subject: [ARM] OMAP3 clock: optimize DPLL rate rounding algorithm

The previous DPLL rate rounding algorithm counted the divider (N) down
from the maximum to 1.  Since we currently use a broad DPLL rate
tolerance, and lower N values are more power-efficient, we can often
bypass several iterations through the loop by counting N upwards from
1.

Peter de Schrijver <peter.de-schrijver@nokia.com> put up with several
test cycles of this patch - thanks Peter.

linux-omap source commit is 6f6d82bb2f80fa20a841ac3e95a6f44a5a156188.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Peter de Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 2f0eaaad481..76e20bcc4e8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -45,7 +45,7 @@
 #define DPLL_MIN_DIVIDER		1
 
 /* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		(1 << 0)
+#define DPLL_MULT_UNDERFLOW		-1
 
 /*
  * Scale factor to mitigate roundoff errors in DPLL rate rounding.
@@ -826,7 +826,7 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
 			   unsigned long target_rate,
 			   unsigned long parent_rate)
 {
-	int flags = 0, carry = 0;
+	int r = 0, carry = 0;
 
 	/* Unscale m and round if necessary */
 	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
@@ -847,13 +847,13 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
 	if (*m < DPLL_MIN_MULTIPLIER) {
 		*m = DPLL_MIN_MULTIPLIER;
 		*new_rate = 0;
-		flags = DPLL_MULT_UNDERFLOW;
+		r = DPLL_MULT_UNDERFLOW;
 	}
 
 	if (*new_rate == 0)
 		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
 
-	return flags;
+	return r;
 }
 
 /**
@@ -892,21 +892,27 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 
 	dd->last_rounded_rate = 0;
 
-	for (n = dd->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+	for (n = DPLL_MIN_DIVIDER; n <= dd->max_divider; n++) {
 
 		/* Compute the scaled DPLL multiplier, based on the divider */
 		m = scaled_rt_rp * n;
 
 		/*
-		 * Since we're counting n down, a m overflow means we can
-		 * can immediately skip to the next n
+		 * Since we're counting n up, a m overflow means we
+		 * can bail out completely (since as n increases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
 		 */
 		if (m > scaled_max_m)
-			continue;
+			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
 				    clk->parent->rate);
 
+		/* m can't be set low enough for this n - try with a larger n */
+		if (r == DPLL_MULT_UNDERFLOW)
+			continue;
+
 		e = target_rate - new_rate;
 		pr_debug("clock: n = %d: m = %d: rate error is %d "
 			 "(new_rate = %ld)\n", n, m, e, new_rate);
@@ -918,16 +924,11 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			min_e_n = n;
 
 			pr_debug("clock: found new least error %d\n", min_e);
-		}
 
-		/*
-		 * Since we're counting n down, a m underflow means we
-		 * can bail out completely (since as n decreases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (r & DPLL_MULT_UNDERFLOW)
-			break;
+			/* We found good settings -- bail out now */
+			if (min_e <= clk->dpll_data->rate_tolerance)
+				break;
+		}
 	}
 
 	if (min_e < 0) {
-- 
cgit v1.2.3


From 95f538ac370d9625457ba00ef7c3bb91e2b92f89 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:44 -0700
Subject: [ARM] OMAP3 clock: avoid invalid FREQSEL values during DPLL rate
 rounding

The DPLL FREQSEL jitter correction bits are set based on a table in
the 34xx TRM, Table 4-38, according to the DPLL's internal clock
frequency "Fint."  Several Fint frequency ranges are missing from this
table.  Previously, we allowed these Fint frequency ranges to be
selected in the rate rounding code, but did not change the FREQSEL bits.
Correspondence with the OMAP hardware team indicates that Fint values
not in the table should not be used.  So, prevent them from being
selected during DPLL rate rounding.  This removes warnings and also
can prevent the chip from locking up.

The first pass through the rate rounding code will update the DPLL max
and min dividers appropriately, so later rate rounding passes will run
faster than the first.

Peter de Schrijver <peter.de-schrijver@nokia.com> put up with several
test cycles of this patch - thanks Peter.

linux-omap source commit is f9c1b82f55b60fc39eaa6e7aa1fbe380c0ffe2e9.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Peter de Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c             | 67 ++++++++++++++++++++++++++++++++-
 arch/arm/mach-omap2/clock24xx.h         |  1 +
 arch/arm/mach-omap2/clock34xx.h         |  5 +++
 arch/arm/plat-omap/include/mach/clock.h |  1 +
 4 files changed, 72 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 76e20bcc4e8..752e34787f2 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -58,12 +58,68 @@
 #define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
 					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
 
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN		750000
+#define DPLL_FINT_BAND1_MAX		2100000
+#define DPLL_FINT_BAND2_MIN		7500000
+#define DPLL_FINT_BAND2_MAX		21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW		-1
+#define DPLL_FINT_INVALID		-2
+
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
  * OMAP2/3 specific clock functions
  *-------------------------------------------------------------------------*/
 
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+	struct dpll_data *dd;
+	long fint;
+	int ret = 0;
+
+	dd = clk->dpll_data;
+
+	/* DPLL divider must result in a valid jitter correction val */
+	fint = clk->parent->rate / (n + 1);
+	if (fint < DPLL_FINT_BAND1_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "lowering max_divider\n", n);
+		dd->max_divider = n;
+		ret = DPLL_FINT_UNDERFLOW;
+
+	} else if (fint > DPLL_FINT_BAND1_MAX &&
+		   fint < DPLL_FINT_BAND2_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
+
+	} else if (fint > DPLL_FINT_BAND2_MAX) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "boosting min_divider\n", n);
+		dd->min_divider = n;
+		ret = DPLL_FINT_INVALID;
+
+	}
+
+	return ret;
+}
+
 /**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
  * @clk: OMAP clock struct ptr to use
@@ -892,7 +948,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 
 	dd->last_rounded_rate = 0;
 
-	for (n = DPLL_MIN_DIVIDER; n <= dd->max_divider; n++) {
+	for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+		/* Is the (input clk, divider) pair valid for the DPLL? */
+		r = _dpll_test_fint(clk, n);
+		if (r == DPLL_FINT_UNDERFLOW)
+			break;
+		else if (r == DPLL_FINT_INVALID)
+			continue;
 
 		/* Compute the scaled DPLL multiplier, based on the divider */
 		m = scaled_rt_rp * n;
@@ -926,7 +989,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			pr_debug("clock: found new least error %d\n", min_e);
 
 			/* We found good settings -- bail out now */
-			if (min_e <= clk->dpll_data->rate_tolerance)
+			if (min_e <= dd->rate_tolerance)
 				break;
 		}
 	}
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 32dd8573e56..7731ab6acd1 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -666,6 +666,7 @@ static struct dpll_data dpll_dd = {
 	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
 	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
 	.max_multiplier		= 1024,
+	.min_divider		= 1,
 	.max_divider		= 16,
 	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
 };
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 7ee13120262..aadd296c05a 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -268,6 +268,7 @@ static struct dpll_data dpll1_dd = {
 	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -341,6 +342,7 @@ static struct dpll_data dpll2_dd = {
 	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
 	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -400,6 +402,7 @@ static struct dpll_data dpll3_dd = {
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -591,6 +594,7 @@ static struct dpll_data dpll4_dd = {
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
@@ -930,6 +934,7 @@ static struct dpll_data dpll5_dd = {
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
 	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
 	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
 	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
 };
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 611df52a324..cd69111cd33 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -43,6 +43,7 @@ struct dpll_data {
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
 	u8			last_rounded_n;
+	u8			min_divider;
 	u8			max_divider;
 	u32			max_tolerance;
 	u16			max_multiplier;
-- 
cgit v1.2.3


From 416db864c18343c6dcc5e9768c902460c8f8777c Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:08:46 -0700
Subject: [ARM] OMAP3 clock: disable DPLL autoidle while waiting for DPLL to
 lock

During _omap3_noncore_dpll_lock(), if a DPLL has no active downstream
clocks and DPLL autoidle is enabled, the DPLL may never lock, since it
will enter autoidle immediately.  To resolve this, disable DPLL
autoidle while locking the DPLL, and unconditionally wait for the DPLL
to lock.  This fixes some bugs where the kernel would hang when returning
from retention or return the wrong rate for the DPLL.

This patch is a collaboration with Peter de Schrijver
<peter.de-schrijver@nokia.com> and Kevin Hilman
<khilman@deeprootsystems.com>.

linux-omap source commit is 3b7de4be879f1f4f55ae59882a5cbd80f6dcf0f0.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Peter de Schrijver <peter.de-schrijver@nokia.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index aad77e0d43c..3d756babb2f 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -398,19 +398,14 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 
 	ai = omap3_dpll_autoidle_read(clk);
 
+	omap3_dpll_deny_idle(clk);
+
 	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
 
-	if (ai) {
-		/*
-		 * If no downstream clocks are enabled, CM_IDLEST bit
-		 * may never become active, so don't wait for DPLL to lock.
-		 */
-		r = 0;
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
 		omap3_dpll_allow_idle(clk);
-	} else {
-		r = _omap3_wait_dpll_status(clk, 1);
-		omap3_dpll_deny_idle(clk);
-	};
 
 	return r;
 }
-- 
cgit v1.2.3


From ee1eec36345871955730e36232937c9d814a6e20 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:18:19 -0700
Subject: [ARM] OMAP2/3 clock: clean up mach-omap2/clock.c

This patch rolls up several cleanup patches.

1. Some unnecessarily verbose variable names are used in several clock.c
functions; clean these up per CodingStyle.

2. Remove omap2_get_clksel() and just use clk->clksel_reg and
clk->clksel_mask directly.

3. Get rid of void __iomem * usage in omap2_clksel_get_src_field.
Prepend the function name with an underscore to highlight that it is a
static function.

linux-omap source commits are 7fa95e007ea2f3c4d0ecd2779d809756e7775894,
af0ea23f1ee4a5bea3b026e38761b47089f9048a, and
91c0c979b47c44b08f80e4f8d4c990fb158d82c4.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 98 ++++++++++++++++-----------------------------
 1 file changed, 35 insertions(+), 63 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 752e34787f2..5d7d4c52f37 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -298,7 +298,7 @@ static void omap2_clk_wait_ready(struct clk *clk)
 
 static int omap2_dflt_clk_enable(struct clk *clk)
 {
-	u32 regval32;
+	u32 v;
 
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
@@ -306,12 +306,12 @@ static int omap2_dflt_clk_enable(struct clk *clk)
 		return 0; /* REVISIT: -EINVAL */
 	}
 
-	regval32 = __raw_readl(clk->enable_reg);
+	v = __raw_readl(clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
-		regval32 &= ~(1 << clk->enable_bit);
+		v &= ~(1 << clk->enable_bit);
 	else
-		regval32 |= (1 << clk->enable_bit);
-	__raw_writel(regval32, clk->enable_reg);
+		v |= (1 << clk->enable_bit);
+	__raw_writel(v, clk->enable_reg);
 	wmb();
 
 	return 0;
@@ -335,7 +335,7 @@ static int omap2_dflt_clk_enable_wait(struct clk *clk)
 
 static void omap2_dflt_clk_disable(struct clk *clk)
 {
-	u32 regval32;
+	u32 v;
 
 	if (!clk->enable_reg) {
 		/*
@@ -347,12 +347,12 @@ static void omap2_dflt_clk_disable(struct clk *clk)
 		return;
 	}
 
-	regval32 = __raw_readl(clk->enable_reg);
+	v = __raw_readl(clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
-		regval32 |= (1 << clk->enable_bit);
+		v |= (1 << clk->enable_bit);
 	else
-		regval32 &= ~(1 << clk->enable_bit);
-	__raw_writel(regval32, clk->enable_reg);
+		v &= ~(1 << clk->enable_bit);
+	__raw_writel(v, clk->enable_reg);
 	wmb();
 }
 
@@ -643,23 +643,6 @@ u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 	return clkr->val;
 }
 
-/**
- * omap2_get_clksel - find clksel register addr & field mask for a clk
- * @clk: struct clk to use
- * @field_mask: ptr to u32 to store the register field mask
- *
- * Returns the address of the clksel register upon success or NULL on error.
- */
-static void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
-{
-	if (!clk->clksel_reg || (clk->clksel_mask == 0))
-		return NULL;
-
-	*field_mask = clk->clksel_mask;
-
-	return clk->clksel_reg;
-}
-
 /**
  * omap2_clksel_get_divisor - get current divider applied to parent clock.
  * @clk: OMAP struct clk to use.
@@ -668,40 +651,36 @@ static void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
  */
 u32 omap2_clksel_get_divisor(struct clk *clk)
 {
-	u32 field_mask, field_val;
-	void __iomem *div_addr;
+	u32 v;
 
-	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (!div_addr)
+	if (!clk->clksel_mask)
 		return 0;
 
-	field_val = __raw_readl(div_addr) & field_mask;
-	field_val >>= __ffs(field_mask);
+	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	v >>= __ffs(clk->clksel_mask);
 
-	return omap2_clksel_to_divisor(clk, field_val);
+	return omap2_clksel_to_divisor(clk, v);
 }
 
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 field_mask, field_val, reg_val, validrate, new_div = 0;
-	void __iomem *div_addr;
+	u32 v, field_val, validrate, new_div = 0;
 
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
+	if (!clk->clksel_mask)
 		return -EINVAL;
 
-	div_addr = omap2_get_clksel(clk, &field_mask);
-	if (!div_addr)
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
 		return -EINVAL;
 
 	field_val = omap2_divisor_to_clksel(clk, new_div);
 	if (field_val == ~0)
 		return -EINVAL;
 
-	reg_val = __raw_readl(div_addr);
-	reg_val &= ~field_mask;
-	reg_val |= (field_val << __ffs(field_mask));
-	__raw_writel(reg_val, div_addr);
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
 	wmb();
 
 	clk->rate = clk->parent->rate / new_div;
@@ -737,18 +716,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
 /*
  * Converts encoded control register address into a full address
- * On error, *src_addr will be returned as 0.
+ * On error, the return value (parent_div) will be 0.
  */
-static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
-				      struct clk *src_clk, u32 *field_mask,
-				      struct clk *clk, u32 *parent_div)
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+				       u32 *field_val)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
 
-	*parent_div = 0;
-	*src_addr = NULL;
-
 	clks = omap2_get_clksel_by_parent(clk, src_clk);
 	if (!clks)
 		return 0;
@@ -768,17 +743,14 @@ static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
 	/* Should never happen.  Add a clksel mask to the struct clk. */
 	WARN_ON(clk->clksel_mask == 0);
 
-	*field_mask = clk->clksel_mask;
-	*src_addr = clk->clksel_reg;
-	*parent_div = clkr->div;
+	*field_val = clkr->val;
 
-	return clkr->val;
+	return clkr->div;
 }
 
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	void __iomem *src_addr;
-	u32 field_val, field_mask, reg_val, parent_div;
+	u32 field_val, v, parent_div;
 
 	if (clk->flags & CONFIG_PARTICIPANT)
 		return -EINVAL;
@@ -786,18 +758,18 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	if (!clk->clksel)
 		return -EINVAL;
 
-	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
-					       &field_mask, clk, &parent_div);
-	if (!src_addr)
+	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+	if (!parent_div)
 		return -EINVAL;
 
 	if (clk->usecount > 0)
 		_omap2_clk_disable(clk);
 
 	/* Set new source value (previous dividers if any in effect) */
-	reg_val = __raw_readl(src_addr) & ~field_mask;
-	reg_val |= (field_val << __ffs(field_mask));
-	__raw_writel(reg_val, src_addr);
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
 	wmb();
 
 	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-- 
cgit v1.2.3


From 027d8ded5d1c142eb120caff7a395c0637467ac9 Mon Sep 17 00:00:00 2001
From: Jouni Hogander <jouni.hogander@nokia.com>
Date: Fri, 16 May 2008 13:58:18 +0300
Subject: [ARM] OMAP34XX: Add miscellaneous definitions related to 34xx

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/cm-regbits-34xx.h  |  7 +++++++
 arch/arm/mach-omap2/prm-regbits-34xx.h |  9 +++++++++
 arch/arm/mach-omap2/prm.h              | 24 +++++++++++++-----------
 3 files changed, 29 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index aaf68a59800..844356cc75b 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -208,6 +208,10 @@
 #define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
 
 /* CM_AUTOIDLE1_CORE */
+#define OMAP3430ES2_AUTO_MMC3				(1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_SHIFT			30
+#define OMAP3430ES2_AUTO_ICR				(1 << 29)
+#define OMAP3430ES2_AUTO_ICR_SHIFT			29
 #define OMAP3430_AUTO_AES2				(1 << 28)
 #define OMAP3430_AUTO_AES2_SHIFT			28
 #define OMAP3430_AUTO_SHA12				(1 << 27)
@@ -276,6 +280,9 @@
 #define OMAP3430_AUTO_DES1_SHIFT			0
 
 /* CM_AUTOIDLE3_CORE */
+#define	OMAP3430ES2_AUTO_USBHOST			(1 << 0)
+#define	OMAP3430ES2_AUTO_USBHOST_SHIFT			0
+#define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
 
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 5b5ecfe6c99..c6a7940f428 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -366,6 +366,7 @@
 
 /* PM_WKEN_WKUP specific bits */
 #define OMAP3430_EN_IO					(1 << 8)
+#define OMAP3430_EN_GPIO1				(1 << 3)
 
 /* PM_MPUGRPSEL_WKUP specific bits */
 
@@ -452,6 +453,14 @@
 #define OMAP3430_CMDRA0_MASK				(0xff << 0)
 
 /* PRM_VC_CMD_VAL_0 specific bits */
+#define OMAP3430_VC_CMD_ON_SHIFT			24
+#define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
+#define OMAP3430_VC_CMD_ONLP_SHIFT			16
+#define OMAP3430_VC_CMD_ONLP_MASK			(0xFF << 16)
+#define OMAP3430_VC_CMD_RET_SHIFT			8
+#define OMAP3430_VC_CMD_RET_MASK			(0xFF << 8)
+#define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
 
 /* PRM_VC_CMD_VAL_1 specific bits */
 
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index e4dc4b17881..826d326b806 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -141,6 +141,19 @@
 #define PM_PWSTCTRL					0x00e0
 #define PM_PWSTST					0x00e4
 
+/* Omap2 specific registers */
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+/* Omap3 specific registers */
+#define OMAP3430ES2_PM_WKEN3				0x00f0
+#define OMAP3430ES2_PM_WKST3				0x00b8
+
 #define OMAP3430_PM_MPUGRPSEL				0x00a4
 #define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
 
@@ -153,16 +166,6 @@
 #define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
 
 
-/* Architecture-specific registers */
-
-#define OMAP24XX_PM_WKEN2				0x00a4
-#define OMAP24XX_PM_WKST2				0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
-
 #ifndef __ASSEMBLER__
 
 /* Power/reset management domain register get/set */
@@ -228,7 +231,6 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 #define OMAP_RSTTIME1_SHIFT				0
 #define OMAP_RSTTIME1_MASK				(0xff << 0)
 
-
 /* PRM_RSTCTRL */
 /* Named RM_RSTCTRL_WKUP on the 24xx */
 /* 2420 calls RST_DPLL3 'RST_DPLL' */
-- 
cgit v1.2.3


From da0747d4faf55320f0f6cbcd8525e2a8e4619925 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:18:22 -0700
Subject: [ARM] OMAP2 PRCM: clean up CM_IDLEST bits

This patch fixes a few OMAP2xxx CM_IDLEST bits that were incorrectly
marked as being OMAP2xxx-wide, when they were actually 2420-specific.

Also, originally when the PRCM register macros were defined, bit shift
macros used a "_SHIFT" suffix, and mask macros used none.  This became
a source of bugs and confusion, as the mask macros were mistakenly
used for shift values.  Gradually, the mask macros have been updated,
piece by piece, to add a "_MASK" suffix on the end to clarify.  This
patch applies this change to the CM_IDLEST_* register bits.

The patch also adds a few bits that were missing, mostly from the 3430ES1
to ES2 revisions.

linux-omap source commits are d18eff5b5fa15e170794397a6a94486d1f774f77,
e1f1a5cc24615fb790cc763c96d1c5cfe6296f5b, and part of
9fe6b6cf8d9e0cbb429fd64553a4b3160a9e99e1

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/cm-regbits-24xx.h |  80 +++++++++-----
 arch/arm/mach-omap2/cm-regbits-34xx.h |  96 ++++++++++++-----
 arch/arm/mach-omap2/prcm-common.h     | 198 +++++++++++++++++++++++-----------
 3 files changed, 257 insertions(+), 117 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 1098ecfab86..297a2fe634e 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -110,35 +110,56 @@
 #define OMAP24XX_EN_DES					(1 << 0)
 
 /* CM_IDLEST1_CORE specific bits */
-#define OMAP24XX_ST_MAILBOXES				(1 << 30)
-#define OMAP24XX_ST_WDT4				(1 << 29)
-#define OMAP2420_ST_WDT3				(1 << 28)
-#define OMAP24XX_ST_MSPRO				(1 << 27)
-#define OMAP24XX_ST_FAC					(1 << 25)
-#define OMAP2420_ST_EAC					(1 << 24)
-#define OMAP24XX_ST_HDQ					(1 << 23)
-#define OMAP24XX_ST_I2C2				(1 << 20)
-#define OMAP24XX_ST_I2C1				(1 << 19)
-#define OMAP24XX_ST_MCBSP2				(1 << 16)
-#define OMAP24XX_ST_MCBSP1				(1 << 15)
-#define OMAP24XX_ST_DSS					(1 << 0)
+#define OMAP24XX_ST_MAILBOXES_SHIFT			30
+#define OMAP24XX_ST_MAILBOXES_MASK			(1 << 30)
+#define OMAP24XX_ST_WDT4_SHIFT				29
+#define OMAP24XX_ST_WDT4_MASK				(1 << 29)
+#define OMAP2420_ST_WDT3_SHIFT				28
+#define OMAP2420_ST_WDT3_MASK				(1 << 28)
+#define OMAP24XX_ST_MSPRO_SHIFT				27
+#define OMAP24XX_ST_MSPRO_MASK				(1 << 27)
+#define OMAP24XX_ST_FAC_SHIFT				25
+#define OMAP24XX_ST_FAC_MASK				(1 << 25)
+#define OMAP2420_ST_EAC_SHIFT				24
+#define OMAP2420_ST_EAC_MASK				(1 << 24)
+#define OMAP24XX_ST_HDQ_SHIFT				23
+#define OMAP24XX_ST_HDQ_MASK				(1 << 23)
+#define OMAP2420_ST_I2C2_SHIFT				20
+#define OMAP2420_ST_I2C2_MASK				(1 << 20)
+#define OMAP2420_ST_I2C1_SHIFT				19
+#define OMAP2420_ST_I2C1_MASK				(1 << 19)
+#define OMAP24XX_ST_MCBSP2_SHIFT			16
+#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
+#define OMAP24XX_ST_MCBSP1_SHIFT			15
+#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
+#define OMAP24XX_ST_DSS_SHIFT				0
+#define OMAP24XX_ST_DSS_MASK				(1 << 0)
 
 /* CM_IDLEST2_CORE */
-#define OMAP2430_ST_MCBSP5				(1 << 5)
-#define OMAP2430_ST_MCBSP4				(1 << 4)
-#define OMAP2430_ST_MCBSP3				(1 << 3)
-#define OMAP24XX_ST_SSI					(1 << 1)
+#define OMAP2430_ST_MCBSP5_SHIFT			5
+#define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
+#define OMAP2430_ST_MCBSP4_SHIFT				4
+#define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
+#define OMAP2430_ST_MCBSP3_SHIFT				3
+#define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
+#define OMAP24XX_ST_SSI_SHIFT				1
+#define OMAP24XX_ST_SSI_MASK				(1 << 1)
 
 /* CM_IDLEST3_CORE */
 /* 2430 only */
-#define OMAP2430_ST_SDRC				(1 << 2)
+#define OMAP2430_ST_SDRC_MASK				(1 << 2)
 
 /* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA					(1 << 4)
-#define OMAP24XX_ST_AES					(1 << 3)
-#define OMAP24XX_ST_RNG					(1 << 2)
-#define OMAP24XX_ST_SHA					(1 << 1)
-#define OMAP24XX_ST_DES					(1 << 0)
+#define OMAP24XX_ST_PKA_SHIFT				4
+#define OMAP24XX_ST_PKA_MASK				(1 << 4)
+#define OMAP24XX_ST_AES_SHIFT				3
+#define OMAP24XX_ST_AES_MASK				(1 << 3)
+#define OMAP24XX_ST_RNG_SHIFT				2
+#define OMAP24XX_ST_RNG_MASK				(1 << 2)
+#define OMAP24XX_ST_SHA_SHIFT				1
+#define OMAP24XX_ST_SHA_MASK				(1 << 1)
+#define OMAP24XX_ST_DES_SHIFT				0
+#define OMAP24XX_ST_DES_MASK				(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
 #define OMAP24XX_AUTO_CAM				(1 << 31)
@@ -275,11 +296,16 @@
 #define OMAP24XX_EN_32KSYNC				(1 << 1)
 
 /* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR					(1 << 6)
-#define OMAP24XX_ST_OMAPCTRL				(1 << 5)
-#define OMAP24XX_ST_WDT1				(1 << 4)
-#define OMAP24XX_ST_MPU_WDT				(1 << 3)
-#define OMAP24XX_ST_32KSYNC				(1 << 1)
+#define OMAP2430_ST_ICR_SHIFT				6
+#define OMAP2430_ST_ICR_MASK				(1 << 6)
+#define OMAP24XX_ST_OMAPCTRL_SHIFT			5
+#define OMAP24XX_ST_OMAPCTRL_MASK			(1 << 5)
+#define OMAP24XX_ST_WDT1_SHIFT				4
+#define OMAP24XX_ST_WDT1_MASK				(1 << 4)
+#define OMAP24XX_ST_MPU_WDT_SHIFT			3
+#define OMAP24XX_ST_MPU_WDT_MASK			(1 << 3)
+#define OMAP24XX_ST_32KSYNC_SHIFT			1
+#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
 
 /* CM_AUTOIDLE_WKUP */
 #define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 844356cc75b..6f3f5a36aae 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -183,29 +183,52 @@
 #define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
 
 /* CM_IDLEST1_CORE specific bits */
-#define OMAP3430_ST_ICR					(1 << 29)
-#define OMAP3430_ST_AES2				(1 << 28)
-#define OMAP3430_ST_SHA12				(1 << 27)
-#define OMAP3430_ST_DES2				(1 << 26)
-#define OMAP3430_ST_MSPRO				(1 << 23)
-#define OMAP3430_ST_HDQ					(1 << 22)
-#define OMAP3430ES1_ST_FAC				(1 << 8)
-#define OMAP3430ES1_ST_MAILBOXES			(1 << 7)
-#define OMAP3430_ST_OMAPCTRL				(1 << 6)
-#define OMAP3430_ST_SDMA				(1 << 2)
-#define OMAP3430_ST_SDRC				(1 << 1)
-#define OMAP3430_ST_SSI					(1 << 0)
+#define OMAP3430ES2_ST_MMC3_SHIFT			30
+#define OMAP3430ES2_ST_MMC3_MASK			(1 << 30)
+#define OMAP3430_ST_ICR_SHIFT				29
+#define OMAP3430_ST_ICR_MASK				(1 << 29)
+#define OMAP3430_ST_AES2_SHIFT				28
+#define OMAP3430_ST_AES2_MASK				(1 << 28)
+#define OMAP3430_ST_SHA12_SHIFT				27
+#define OMAP3430_ST_SHA12_MASK				(1 << 27)
+#define OMAP3430_ST_DES2_SHIFT				26
+#define OMAP3430_ST_DES2_MASK				(1 << 26)
+#define OMAP3430_ST_MSPRO_SHIFT				23
+#define OMAP3430_ST_MSPRO_MASK				(1 << 23)
+#define OMAP3430_ST_HDQ_SHIFT				22
+#define OMAP3430_ST_HDQ_MASK				(1 << 22)
+#define OMAP3430ES1_ST_FAC_SHIFT			8
+#define OMAP3430ES1_ST_FAC_MASK				(1 << 8)
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
+#define OMAP3430ES2_ST_SSI_IDLE_MASK			(1 << 8)
+#define OMAP3430_ST_MAILBOXES_SHIFT			7
+#define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
+#define OMAP3430_ST_OMAPCTRL_SHIFT			6
+#define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
+#define OMAP3430_ST_SDMA_SHIFT				2
+#define OMAP3430_ST_SDMA_MASK				(1 << 2)
+#define OMAP3430_ST_SDRC_SHIFT				1
+#define OMAP3430_ST_SDRC_MASK				(1 << 1)
+#define OMAP3430_ST_SSI_STDBY_SHIFT			0
+#define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
 
 /* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA					(1 << 4)
-#define OMAP3430_ST_AES1				(1 << 3)
-#define OMAP3430_ST_RNG					(1 << 2)
-#define OMAP3430_ST_SHA11				(1 << 1)
-#define OMAP3430_ST_DES1				(1 << 0)
+#define OMAP3430_ST_PKA_SHIFT				4
+#define OMAP3430_ST_PKA_MASK				(1 << 4)
+#define OMAP3430_ST_AES1_SHIFT				3
+#define OMAP3430_ST_AES1_MASK				(1 << 3)
+#define OMAP3430_ST_RNG_SHIFT				2
+#define OMAP3430_ST_RNG_MASK				(1 << 2)
+#define OMAP3430_ST_SHA11_SHIFT				1
+#define OMAP3430_ST_SHA11_MASK				(1 << 1)
+#define OMAP3430_ST_DES1_SHIFT				0
+#define OMAP3430_ST_DES1_MASK				(1 << 0)
 
 /* CM_IDLEST3_CORE */
 #define OMAP3430ES2_ST_USBTLL_SHIFT			2
 #define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
+#define OMAP3430ES2_ST_CPEFUSE_SHIFT			0
+#define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
 #define OMAP3430ES2_AUTO_MMC3				(1 << 30)
@@ -360,6 +383,7 @@
 
 /* CM_FCLKEN_WKUP specific bits */
 #define OMAP3430ES2_EN_USIMOCP_SHIFT			9
+#define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
 
 /* CM_ICLKEN_WKUP specific bits */
 #define OMAP3430_EN_WDT1				(1 << 4)
@@ -368,11 +392,18 @@
 #define OMAP3430_EN_32KSYNC_SHIFT			2
 
 /* CM_IDLEST_WKUP specific bits */
-#define OMAP3430_ST_WDT2				(1 << 5)
-#define OMAP3430_ST_WDT1				(1 << 4)
-#define OMAP3430_ST_32KSYNC				(1 << 2)
+#define OMAP3430ES2_ST_USIMOCP_SHIFT			9
+#define OMAP3430ES2_ST_USIMOCP_MASK			(1 << 9)
+#define OMAP3430_ST_WDT2_SHIFT				5
+#define OMAP3430_ST_WDT2_MASK				(1 << 5)
+#define OMAP3430_ST_WDT1_SHIFT				4
+#define OMAP3430_ST_WDT1_MASK				(1 << 4)
+#define OMAP3430_ST_32KSYNC_SHIFT			2
+#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
 
 /* CM_AUTOIDLE_WKUP */
+#define OMAP3430ES2_AUTO_USIMOCP				(1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
 #define OMAP3430_AUTO_WDT2				(1 << 5)
 #define OMAP3430_AUTO_WDT2_SHIFT			5
 #define OMAP3430_AUTO_WDT1				(1 << 4)
@@ -437,6 +468,8 @@
 #define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
 
 /* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_USIM_CLK_SHIFT			2
+#define OMAP3430ES2_ST_USIM_CLK_MASK			(1 << 2)
 #define OMAP3430ES2_ST_120M_CLK_SHIFT			1
 #define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
 #define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
@@ -508,7 +541,12 @@
 #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
 
 /* CM_IDLEST_DSS */
-#define OMAP3430_ST_DSS					(1 << 0)
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
+#define OMAP3430ES2_ST_DSS_IDLE_MASK			(1 << 1)
+#define OMAP3430ES2_ST_DSS_STDBY_SHIFT			0
+#define OMAP3430ES2_ST_DSS_STDBY_MASK			(1 << 0)
+#define OMAP3430ES1_ST_DSS_SHIFT			0
+#define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_DSS */
 #define OMAP3430_AUTO_DSS				(1 << 0)
@@ -562,10 +600,14 @@
 /* CM_ICLKEN_PER specific bits */
 
 /* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3				(1 << 12)
-#define OMAP3430_ST_MCBSP4				(1 << 2)
-#define OMAP3430_ST_MCBSP3				(1 << 1)
-#define OMAP3430_ST_MCBSP2				(1 << 0)
+#define OMAP3430_ST_WDT3_SHIFT				12
+#define OMAP3430_ST_WDT3_MASK				(1 << 12)
+#define OMAP3430_ST_MCBSP4_SHIFT			2
+#define OMAP3430_ST_MCBSP4_MASK				(1 << 2)
+#define OMAP3430_ST_MCBSP3_SHIFT			1
+#define OMAP3430_ST_MCBSP3_MASK				(1 << 1)
+#define OMAP3430_ST_MCBSP2_SHIFT			0
+#define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
 #define OMAP3430_AUTO_GPIO6				(1 << 17)
@@ -693,6 +735,10 @@
 #define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
 
 /* CM_IDLEST_USBHOST */
+#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT		1
+#define OMAP3430ES2_ST_USBHOST_IDLE_MASK		(1 << 1)
+#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT		0
+#define OMAP3430ES2_ST_USBHOST_STDBY_MASK		(1 << 0)
 
 /* CM_AUTOIDLE_USBHOST */
 #define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 4a32822ff3f..812d50ee495 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -113,33 +113,58 @@
 #define OMAP2430_EN_USBHS				(1 << 6)
 
 /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
-#define OMAP2420_ST_MMC					(1 << 26)
-#define OMAP24XX_ST_UART2				(1 << 22)
-#define OMAP24XX_ST_UART1				(1 << 21)
-#define OMAP24XX_ST_MCSPI2				(1 << 18)
-#define OMAP24XX_ST_MCSPI1				(1 << 17)
-#define OMAP24XX_ST_GPT12				(1 << 14)
-#define OMAP24XX_ST_GPT11				(1 << 13)
-#define OMAP24XX_ST_GPT10				(1 << 12)
-#define OMAP24XX_ST_GPT9				(1 << 11)
-#define OMAP24XX_ST_GPT8				(1 << 10)
-#define OMAP24XX_ST_GPT7				(1 << 9)
-#define OMAP24XX_ST_GPT6				(1 << 8)
-#define OMAP24XX_ST_GPT5				(1 << 7)
-#define OMAP24XX_ST_GPT4				(1 << 6)
-#define OMAP24XX_ST_GPT3				(1 << 5)
-#define OMAP24XX_ST_GPT2				(1 << 4)
-#define OMAP2420_ST_VLYNQ				(1 << 3)
+#define OMAP2420_ST_MMC_SHIFT				26
+#define OMAP2420_ST_MMC_MASK				(1 << 26)
+#define OMAP24XX_ST_UART2_SHIFT				22
+#define OMAP24XX_ST_UART2_MASK				(1 << 22)
+#define OMAP24XX_ST_UART1_SHIFT				21
+#define OMAP24XX_ST_UART1_MASK				(1 << 21)
+#define OMAP24XX_ST_MCSPI2_SHIFT			18
+#define OMAP24XX_ST_MCSPI2_MASK				(1 << 18)
+#define OMAP24XX_ST_MCSPI1_SHIFT			17
+#define OMAP24XX_ST_MCSPI1_MASK				(1 << 17)
+#define OMAP24XX_ST_GPT12_SHIFT				14
+#define OMAP24XX_ST_GPT12_MASK				(1 << 14)
+#define OMAP24XX_ST_GPT11_SHIFT				13
+#define OMAP24XX_ST_GPT11_MASK				(1 << 13)
+#define OMAP24XX_ST_GPT10_SHIFT				12
+#define OMAP24XX_ST_GPT10_MASK				(1 << 12)
+#define OMAP24XX_ST_GPT9_SHIFT				11
+#define OMAP24XX_ST_GPT9_MASK				(1 << 11)
+#define OMAP24XX_ST_GPT8_SHIFT				10
+#define OMAP24XX_ST_GPT8_MASK				(1 << 10)
+#define OMAP24XX_ST_GPT7_SHIFT				9
+#define OMAP24XX_ST_GPT7_MASK				(1 << 9)
+#define OMAP24XX_ST_GPT6_SHIFT				8
+#define OMAP24XX_ST_GPT6_MASK				(1 << 8)
+#define OMAP24XX_ST_GPT5_SHIFT				7
+#define OMAP24XX_ST_GPT5_MASK				(1 << 7)
+#define OMAP24XX_ST_GPT4_SHIFT				6
+#define OMAP24XX_ST_GPT4_MASK				(1 << 6)
+#define OMAP24XX_ST_GPT3_SHIFT				5
+#define OMAP24XX_ST_GPT3_MASK				(1 << 5)
+#define OMAP24XX_ST_GPT2_SHIFT				4
+#define OMAP24XX_ST_GPT2_MASK				(1 << 4)
+#define OMAP2420_ST_VLYNQ_SHIFT				3
+#define OMAP2420_ST_VLYNQ_MASK				(1 << 3)
 
 /* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
-#define OMAP2430_ST_MDM_INTC				(1 << 11)
-#define OMAP2430_ST_GPIO5				(1 << 10)
-#define OMAP2430_ST_MCSPI3				(1 << 9)
-#define OMAP2430_ST_MMCHS2				(1 << 8)
-#define OMAP2430_ST_MMCHS1				(1 << 7)
-#define OMAP2430_ST_USBHS				(1 << 6)
-#define OMAP24XX_ST_UART3				(1 << 2)
-#define OMAP24XX_ST_USB					(1 << 0)
+#define OMAP2430_ST_MDM_INTC_SHIFT			11
+#define OMAP2430_ST_MDM_INTC_MASK			(1 << 11)
+#define OMAP2430_ST_GPIO5_SHIFT				10
+#define OMAP2430_ST_GPIO5_MASK				(1 << 10)
+#define OMAP2430_ST_MCSPI3_SHIFT			9
+#define OMAP2430_ST_MCSPI3_MASK				(1 << 9)
+#define OMAP2430_ST_MMCHS2_SHIFT			8
+#define OMAP2430_ST_MMCHS2_MASK				(1 << 8)
+#define OMAP2430_ST_MMCHS1_SHIFT			7
+#define OMAP2430_ST_MMCHS1_MASK				(1 << 7)
+#define OMAP2430_ST_USBHS_SHIFT				6
+#define OMAP2430_ST_USBHS_MASK				(1 << 6)
+#define OMAP24XX_ST_UART3_SHIFT				2
+#define OMAP24XX_ST_UART3_MASK				(1 << 2)
+#define OMAP24XX_ST_USB_SHIFT				0
+#define OMAP24XX_ST_USB_MASK				(1 << 0)
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP24XX_EN_GPIOS_SHIFT				2
@@ -148,11 +173,13 @@
 #define OMAP24XX_EN_GPT1				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS				(1 << 2)
-#define OMAP24XX_ST_GPT1				(1 << 0)
+#define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
+#define OMAP24XX_ST_GPIOS_MASK				2
+#define OMAP24XX_ST_GPT1_SHIFT				(1 << 0)
+#define OMAP24XX_ST_GPT1_MASK				0
 
 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM					(1 << 0)
+#define OMAP2430_ST_MDM_SHIFT				(1 << 0)
 
 
 /* 3430 register bits shared between CM & PRM registers */
@@ -205,24 +232,46 @@
 #define OMAP3430_EN_HSOTGUSB_SHIFT				4
 
 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
-#define OMAP3430_ST_MMC2				(1 << 25)
-#define OMAP3430_ST_MMC1				(1 << 24)
-#define OMAP3430_ST_MCSPI4				(1 << 21)
-#define OMAP3430_ST_MCSPI3				(1 << 20)
-#define OMAP3430_ST_MCSPI2				(1 << 19)
-#define OMAP3430_ST_MCSPI1				(1 << 18)
-#define OMAP3430_ST_I2C3				(1 << 17)
-#define OMAP3430_ST_I2C2				(1 << 16)
-#define OMAP3430_ST_I2C1				(1 << 15)
-#define OMAP3430_ST_UART2				(1 << 14)
-#define OMAP3430_ST_UART1				(1 << 13)
-#define OMAP3430_ST_GPT11				(1 << 12)
-#define OMAP3430_ST_GPT10				(1 << 11)
-#define OMAP3430_ST_MCBSP5				(1 << 10)
-#define OMAP3430_ST_MCBSP1				(1 << 9)
-#define OMAP3430_ST_FSHOSTUSB				(1 << 5)
-#define OMAP3430_ST_HSOTGUSB				(1 << 4)
-#define OMAP3430_ST_D2D					(1 << 3)
+#define OMAP3430_ST_MMC2_SHIFT				25
+#define OMAP3430_ST_MMC2_MASK				(1 << 25)
+#define OMAP3430_ST_MMC1_SHIFT				24
+#define OMAP3430_ST_MMC1_MASK				(1 << 24)
+#define OMAP3430_ST_MCSPI4_SHIFT			21
+#define OMAP3430_ST_MCSPI4_MASK				(1 << 21)
+#define OMAP3430_ST_MCSPI3_SHIFT			20
+#define OMAP3430_ST_MCSPI3_MASK				(1 << 20)
+#define OMAP3430_ST_MCSPI2_SHIFT			19
+#define OMAP3430_ST_MCSPI2_MASK				(1 << 19)
+#define OMAP3430_ST_MCSPI1_SHIFT			18
+#define OMAP3430_ST_MCSPI1_MASK				(1 << 18)
+#define OMAP3430_ST_I2C3_SHIFT				17
+#define OMAP3430_ST_I2C3_MASK				(1 << 17)
+#define OMAP3430_ST_I2C2_SHIFT				16
+#define OMAP3430_ST_I2C2_MASK				(1 << 16)
+#define OMAP3430_ST_I2C1_SHIFT				15
+#define OMAP3430_ST_I2C1_MASK				(1 << 15)
+#define OMAP3430_ST_UART2_SHIFT				14
+#define OMAP3430_ST_UART2_MASK				(1 << 14)
+#define OMAP3430_ST_UART1_SHIFT				13
+#define OMAP3430_ST_UART1_MASK				(1 << 13)
+#define OMAP3430_ST_GPT11_SHIFT				12
+#define OMAP3430_ST_GPT11_MASK				(1 << 12)
+#define OMAP3430_ST_GPT10_SHIFT				11
+#define OMAP3430_ST_GPT10_MASK				(1 << 11)
+#define OMAP3430_ST_MCBSP5_SHIFT			10
+#define OMAP3430_ST_MCBSP5_MASK				(1 << 10)
+#define OMAP3430_ST_MCBSP1_SHIFT			9
+#define OMAP3430_ST_MCBSP1_MASK				(1 << 9)
+#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT			5
+#define OMAP3430ES1_ST_FSHOSTUSB_MASK			(1 << 5)
+#define OMAP3430ES1_ST_HSOTGUSB_SHIFT			4
+#define OMAP3430ES1_ST_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK		(1 << 5)
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT		4
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK		(1 << 4)
+#define OMAP3430_ST_D2D_SHIFT				3
+#define OMAP3430_ST_D2D_MASK				(1 << 3)
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP3430_EN_GPIO1				(1 << 3)
@@ -241,11 +290,16 @@
 #define OMAP3430_EN_GPT12_SHIFT				1
 
 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
-#define OMAP3430_ST_SR2					(1 << 7)
-#define OMAP3430_ST_SR1					(1 << 6)
-#define OMAP3430_ST_GPIO1				(1 << 3)
-#define OMAP3430_ST_GPT12				(1 << 1)
-#define OMAP3430_ST_GPT1				(1 << 0)
+#define OMAP3430_ST_SR2_SHIFT				7
+#define OMAP3430_ST_SR2_MASK				(1 << 7)
+#define OMAP3430_ST_SR1_SHIFT				6
+#define OMAP3430_ST_SR1_MASK				(1 << 6)
+#define OMAP3430_ST_GPIO1_SHIFT				3
+#define OMAP3430_ST_GPIO1_MASK				(1 << 3)
+#define OMAP3430_ST_GPT12_SHIFT				1
+#define OMAP3430_ST_GPT12_MASK				(1 << 1)
+#define OMAP3430_ST_GPT1_SHIFT				0
+#define OMAP3430_ST_GPT1_MASK				(1 << 0)
 
 /*
  * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
@@ -296,20 +350,34 @@
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
-#define OMAP3430_ST_GPIO6				(1 << 17)
-#define OMAP3430_ST_GPIO5				(1 << 16)
-#define OMAP3430_ST_GPIO4				(1 << 15)
-#define OMAP3430_ST_GPIO3				(1 << 14)
-#define OMAP3430_ST_GPIO2				(1 << 13)
-#define OMAP3430_ST_UART3				(1 << 11)
-#define OMAP3430_ST_GPT9				(1 << 10)
-#define OMAP3430_ST_GPT8				(1 << 9)
-#define OMAP3430_ST_GPT7				(1 << 8)
-#define OMAP3430_ST_GPT6				(1 << 7)
-#define OMAP3430_ST_GPT5				(1 << 6)
-#define OMAP3430_ST_GPT4				(1 << 5)
-#define OMAP3430_ST_GPT3				(1 << 4)
-#define OMAP3430_ST_GPT2				(1 << 3)
+#define OMAP3430_ST_GPIO6_SHIFT				17
+#define OMAP3430_ST_GPIO6_MASK				(1 << 17)
+#define OMAP3430_ST_GPIO5_SHIFT				16
+#define OMAP3430_ST_GPIO5_MASK				(1 << 16)
+#define OMAP3430_ST_GPIO4_SHIFT				15
+#define OMAP3430_ST_GPIO4_MASK				(1 << 15)
+#define OMAP3430_ST_GPIO3_SHIFT				14
+#define OMAP3430_ST_GPIO3_MASK				(1 << 14)
+#define OMAP3430_ST_GPIO2_SHIFT				13
+#define OMAP3430_ST_GPIO2_MASK				(1 << 13)
+#define OMAP3430_ST_UART3_SHIFT				11
+#define OMAP3430_ST_UART3_MASK				(1 << 11)
+#define OMAP3430_ST_GPT9_SHIFT				10
+#define OMAP3430_ST_GPT9_MASK				(1 << 10)
+#define OMAP3430_ST_GPT8_SHIFT				9
+#define OMAP3430_ST_GPT8_MASK				(1 << 9)
+#define OMAP3430_ST_GPT7_SHIFT				8
+#define OMAP3430_ST_GPT7_MASK				(1 << 8)
+#define OMAP3430_ST_GPT6_SHIFT				7
+#define OMAP3430_ST_GPT6_MASK				(1 << 7)
+#define OMAP3430_ST_GPT5_SHIFT				6
+#define OMAP3430_ST_GPT5_MASK				(1 << 6)
+#define OMAP3430_ST_GPT4_SHIFT				5
+#define OMAP3430_ST_GPT4_MASK				(1 << 5)
+#define OMAP3430_ST_GPT3_SHIFT				4
+#define OMAP3430_ST_GPT3_MASK				(1 << 4)
+#define OMAP3430_ST_GPT2_SHIFT				3
+#define OMAP3430_ST_GPT2_MASK				(1 << 3)
 
 /* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
 #define OMAP3430_EN_CORE_SHIFT				0
-- 
cgit v1.2.3


From fed415e48f07799b278cd4353385fee1464d4aca Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 28 Jan 2009 12:18:48 -0700
Subject: [ARM] omap: Fix omap1 clock issues

This fixes booting, and is a step toward fixing things properly:

- Make enable_reg u32 instead of u16
  [rmk: virtual addresses are void __iomem *, not u32]
- Get rid of VIRTUAL_IO_ADDRESS for clocks
- Use __raw_read/write instead of omap_read/write for clock registers

This patch adds a bunch of compile warnings until omap1 clock
also uses offsets.

linux-omap source commit is 9d1dff8638c9e96a401e1885f9948662e9ff9636.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             | 77 ++++++++++-----------------------
 arch/arm/mach-omap1/clock.h             | 63 +++++++++++++--------------
 arch/arm/plat-omap/include/mach/clock.h |  1 -
 3 files changed, 53 insertions(+), 88 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 7c455431790..1e477af666e 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -163,7 +163,7 @@ static void omap1_watchdog_recalc(struct clk * clk)
 
 static void omap1_uart_recalc(struct clk * clk)
 {
-	unsigned int val = omap_readl(clk->enable_reg);
+	unsigned int val = __raw_readl(clk->enable_reg);
 	if (val & clk->enable_bit)
 		clk->rate = 48000000;
 	else
@@ -517,14 +517,14 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
 {
 	unsigned int val;
 
-	val = omap_readl(clk->enable_reg);
+	val = __raw_readl(clk->enable_reg);
 	if (rate == 12000000)
 		val &= ~(1 << clk->enable_bit);
 	else if (rate == 48000000)
 		val |= (1 << clk->enable_bit);
 	else
 		return -EINVAL;
-	omap_writel(val, clk->enable_reg);
+	__raw_writel(val, clk->enable_reg);
 	clk->rate = rate;
 
 	return 0;
@@ -543,8 +543,8 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
 	else
 		ratio_bits = (dsor - 2) << 2;
 
-	ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
-	omap_writew(ratio_bits, clk->enable_reg);
+	ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
+	__raw_writew(ratio_bits, clk->enable_reg);
 
 	return 0;
 }
@@ -583,8 +583,8 @@ static void omap1_init_ext_clk(struct clk * clk)
 	__u16 ratio_bits;
 
 	/* Determine current rate and ensure clock is based on 96MHz APLL */
-	ratio_bits = omap_readw(clk->enable_reg) & ~1;
-	omap_writew(ratio_bits, clk->enable_reg);
+	ratio_bits = __raw_readw(clk->enable_reg) & ~1;
+	__raw_writew(ratio_bits, clk->enable_reg);
 
 	ratio_bits = (ratio_bits & 0xfc) >> 2;
 	if (ratio_bits > 6)
@@ -646,25 +646,13 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	}
 
 	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 |= (1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
+		regval32 = __raw_readl(clk->enable_reg);
+		regval32 |= (1 << clk->enable_bit);
+		__raw_writel(regval32, clk->enable_reg);
 	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 |= (1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
+		regval16 = __raw_readw(clk->enable_reg);
+		regval16 |= (1 << clk->enable_bit);
+		__raw_writew(regval16, clk->enable_reg);
 	}
 
 	return 0;
@@ -679,25 +667,13 @@ static void omap1_clk_disable_generic(struct clk *clk)
 		return;
 
 	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval32 = __raw_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			__raw_writel(regval32, clk->enable_reg);
-		} else {
-			regval32 = omap_readl(clk->enable_reg);
-			regval32 &= ~(1 << clk->enable_bit);
-			omap_writel(regval32, clk->enable_reg);
-		}
+		regval32 = __raw_readl(clk->enable_reg);
+		regval32 &= ~(1 << clk->enable_bit);
+		__raw_writel(regval32, clk->enable_reg);
 	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS) {
-			regval16 = __raw_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			__raw_writew(regval16, clk->enable_reg);
-		} else {
-			regval16 = omap_readw(clk->enable_reg);
-			regval16 &= ~(1 << clk->enable_bit);
-			omap_writew(regval16, clk->enable_reg);
-		}
+		regval16 = __raw_readw(clk->enable_reg);
+		regval16 &= ~(1 << clk->enable_bit);
+		__raw_writew(regval16, clk->enable_reg);
 	}
 }
 
@@ -745,17 +721,10 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 	}
 
 	/* Is the clock already disabled? */
-	if (clk->flags & ENABLE_REG_32BIT) {
-		if (clk->flags & VIRTUAL_IO_ADDRESS)
-			regval32 = __raw_readl(clk->enable_reg);
-			else
-				regval32 = omap_readl(clk->enable_reg);
-	} else {
-		if (clk->flags & VIRTUAL_IO_ADDRESS)
-			regval32 = __raw_readw(clk->enable_reg);
-		else
-			regval32 = omap_readw(clk->enable_reg);
-	}
+	if (clk->flags & ENABLE_REG_32BIT)
+		regval32 = __raw_readl(clk->enable_reg);
+	else
+		regval32 = __raw_readw(clk->enable_reg);
 
 	if ((regval32 & (1 << clk->enable_bit)) == 0)
 		return;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index ed343af5f12..1b4dd056d9b 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -165,7 +165,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL |
 				  ENABLE_REG_32BIT | RATE_PROPAGATES,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
 	},
@@ -177,7 +177,7 @@ static struct clk sossi_ck = {
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_1,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
 	.enable_bit	= 16,
 	.recalc		= &omap1_sossi_recalc,
 	.set_rate	= &omap1_set_sossi_rate,
@@ -200,7 +200,7 @@ static struct arm_idlect1_clk armper_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_PERCK,
 		.rate_offset	= CKCTL_PERDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
@@ -214,7 +214,7 @@ static struct clk arm_gpio_ck = {
 	.name		= "arm_gpio_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_GPIOCK,
 	.recalc		= &followparent_recalc,
 };
@@ -225,7 +225,7 @@ static struct arm_idlect1_clk armxor_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
 	},
@@ -238,7 +238,7 @@ static struct arm_idlect1_clk armtim_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
 	},
@@ -251,7 +251,7 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
 		.recalc		= &omap1_watchdog_recalc,
 	},
@@ -274,7 +274,7 @@ static struct clk dsp_ck = {
 	.name		= "dsp_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.enable_reg	= (void __iomem *)ARM_CKCTL,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
@@ -296,7 +296,6 @@ static struct clk dspper_ck = {
 	.name		= "dspper_ck",
 	.ops		= &clkops_dspck,
 	.parent		= &ck_dpll1,
-	.flags		= VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
@@ -309,7 +308,6 @@ static struct clk dspxor_ck = {
 	.name		= "dspxor_ck",
 	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
-	.flags		= VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
 	.recalc		= &followparent_recalc,
@@ -319,7 +317,6 @@ static struct clk dsptim_ck = {
 	.name		= "dsptim_ck",
 	.ops		= &clkops_dspck,
 	.parent		= &ck_ref,
-	.flags		= VIRTUAL_IO_ADDRESS,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
 	.recalc		= &followparent_recalc,
@@ -364,7 +361,7 @@ static struct clk l3_ocpi_ck = {
 	.name		= "l3_ocpi_ck",
 	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_OCPI_CK,
 	.recalc		= &followparent_recalc,
 };
@@ -373,7 +370,7 @@ static struct clk tc1_ck = {
 	.name		= "tc1_ck",
 	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC1_CK,
 	.recalc		= &followparent_recalc,
 };
@@ -382,7 +379,7 @@ static struct clk tc2_ck = {
 	.name		= "tc2_ck",
 	.ops		= &clkops_generic,
 	.parent		= &tc_ck.clk,
-	.enable_reg	= (void __iomem *)ARM_IDLECT3,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC2_CK,
 	.recalc		= &followparent_recalc,
 };
@@ -408,7 +405,7 @@ static struct arm_idlect1_clk api_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
 	},
@@ -421,7 +418,7 @@ static struct arm_idlect1_clk lb_ck = {
 		.ops		= &clkops_generic,
 		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
 	},
@@ -446,7 +443,7 @@ static struct clk lcd_ck_16xx = {
 	.name		= "lcd_ck",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
-	.enable_reg	= (void __iomem *)ARM_IDLECT2,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
@@ -460,7 +457,7 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= (void __iomem *)ARM_IDLECT2,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LCDCK,
 		.rate_offset	= CKCTL_LCDDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
@@ -477,7 +474,7 @@ static struct clk uart1_1510 = {
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
@@ -492,7 +489,7 @@ static struct uart_clk uart1_16xx = {
 		.rate		= 48000000,
 		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
 				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 29,
 	},
 	.sysc_addr	= 0xfffb0054,
@@ -505,7 +502,7 @@ static struct clk uart2_ck = {
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
@@ -518,7 +515,7 @@ static struct clk uart3_1510 = {
 	.parent		= &armper_ck.clk,
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
@@ -533,7 +530,7 @@ static struct uart_clk uart3_16xx = {
 		.rate		= 48000000,
 		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
 				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 31,
 	},
 	.sysc_addr	= 0xfffb9854,
@@ -545,7 +542,7 @@ static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
 	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)ULPD_CLOCK_CTRL,
+	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
 
@@ -555,7 +552,7 @@ static struct clk usb_hhc_ck1510 = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
 	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
 
@@ -566,7 +563,7 @@ static struct clk usb_hhc_ck16xx = {
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
 	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
 	.enable_bit	= 8 /* UHOST_EN */,
 };
 
@@ -576,7 +573,7 @@ static struct clk usb_dc_ck = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.flags		= RATE_FIXED,
-	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 4,
 };
 
@@ -586,15 +583,15 @@ static struct clk mclk_1510 = {
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
 	.flags		= RATE_FIXED,
- 	.enable_reg	= (void __iomem *)SOFT_REQ_REG,
- 	.enable_bit	= 6,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 6,
 };
 
 static struct clk mclk_16xx = {
 	.name		= "mclk",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
 	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
 	.round_rate	= &omap1_round_ext_clk_rate,
@@ -613,7 +610,7 @@ static struct clk bclk_16xx = {
 	.name		= "bclk",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
 	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
 	.round_rate	= &omap1_round_ext_clk_rate,
@@ -627,7 +624,7 @@ static struct clk mmc1_ck = {
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
 	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 23,
 };
 
@@ -639,7 +636,7 @@ static struct clk mmc2_ck = {
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
 	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_0,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
 };
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index cd69111cd33..8705902de1d 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -134,7 +134,6 @@ extern const struct clkops clkops_null;
 #define RATE_PROPAGATES		(1 << 2)	/* Program children too */
 /* bits 3-4 are free */
 #define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
 #define CLOCK_IDLE_CONTROL	(1 << 7)
 #define CLOCK_NO_IDLE_PARENT	(1 << 8)
 #define DELAYED_APP		(1 << 9)	/* Delay application of clock */
-- 
cgit v1.2.3


From f8de9b2c45c4506702da4bd3a5bc7630754077f9 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:27:31 -0700
Subject: [ARM] OMAP2 SDRC: move mach-omap2/memory.h into mach/sdrc.h

Move the contents of the arch/arm/mach-omap2/memory.h file to the
existing mach/sdrc.h file, and remove memory.h.  Modify files which
include memory.h to include asm/arch/sdrc.h instead.

linux-omap source commit is e7ae2d89921372fc4b9712a32cc401d645597807.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c            |  2 +-
 arch/arm/mach-omap2/clock24xx.c        |  2 +-
 arch/arm/mach-omap2/clock34xx.c        |  2 +-
 arch/arm/mach-omap2/io.c               |  4 ++--
 arch/arm/mach-omap2/memory.c           |  9 ++++++-
 arch/arm/mach-omap2/memory.h           | 43 ----------------------------------
 arch/arm/plat-omap/include/mach/gpmc.h |  2 +-
 arch/arm/plat-omap/include/mach/sdrc.h | 21 +++++++++++++++++
 8 files changed, 35 insertions(+), 50 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/memory.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 5d7d4c52f37..18fddb660ff 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -29,7 +29,7 @@
 #include <mach/cpu.h>
 #include <asm/div64.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index b9902666e4b..83911ad4873 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -33,7 +33,7 @@
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 3d756babb2f..52385b1506e 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -32,7 +32,7 @@
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5ea64f926ed..2b5f28a3c4b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,8 +27,8 @@
 #include <mach/mux.h>
 #include <mach/omapfb.h>
 #include <mach/sram.h>
-
-#include "memory.h"
+#include <mach/sdrc.h>
+#include <mach/gpmc.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 882c7022429..93cb25715ba 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -29,9 +29,16 @@
 
 #include "prm.h"
 
-#include "memory.h"
+#include <mach/sdrc.h>
 #include "sdrc.h"
 
+/* Memory timing, DLL mode flags */
+#define M_DDR		1
+#define M_LOCK_CTRL	(1 << 2)
+#define M_UNLOCK	0
+#define M_LOCK		1
+
+
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
deleted file mode 100644
index bb3db80a7c4..00000000000
--- a/arch/arm/mach-omap2/memory.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/memory.h
- *
- * Interface for memory timing related functions for OMAP24XX
- *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Copyright (C) 2005 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
-#define ARCH_ARM_MACH_OMAP2_MEMORY_H
-
-/* Memory timings */
-#define M_DDR		1
-#define M_LOCK_CTRL	(1 << 2)
-#define M_UNLOCK	0
-#define M_LOCK		1
-
-struct memory_timings {
-	u32 m_type;		/* ddr = 1, sdr = 0 */
-	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
-	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
-	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
-	u32 base_cs;		/* base chip select to use for calculations */
-};
-
-extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
-extern u32 omap2_memory_get_slow_dll_ctrl(void);
-extern u32 omap2_memory_get_fast_dll_ctrl(void);
-extern u32 omap2_memory_get_type(void);
-u32 omap2_dll_force_needed(void);
-u32 omap2_reprogram_sdrc(u32 level, u32 force);
-void __init omap2_init_memory(void);
-void __init gpmc_init(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 45b678439bb..921b16532ff 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern void gpmc_init(void);
+extern void __init gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index a98c6c3beb2..c905b5268e5 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -74,4 +74,25 @@
 #define SMS_SYSCONFIG		0x010
 /* REVISIT: fill in other SMS registers here */
 
+#ifndef __ASSEMBLER__
+
+struct memory_timings {
+	u32 m_type;		/* ddr = 1, sdr = 0 */
+	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
+	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
+	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
+	u32 base_cs;		/* base chip select to use for calculations */
+};
+
+extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
+extern u32 omap2_memory_get_slow_dll_ctrl(void);
+extern u32 omap2_memory_get_fast_dll_ctrl(void);
+extern u32 omap2_memory_get_type(void);
+u32 omap2_dll_force_needed(void);
+u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+
+#endif
+
+
 #endif
-- 
cgit v1.2.3


From 96609ef4009515f0667a52b7776c21418df19bd8 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:27:34 -0700
Subject: [ARM] OMAP2 SDRC: rename memory.c to sdrc2xxx.c

Rename arch/arm/mach-omap2/memory.c to arch/arm/mach-omap2/sdrc2xxx.c, since
it contains exclusively SDRAM-related functions.  Most of the functions
are also OMAP2xxx-specific - those which are common will be separated out
in a following patch.

linux-omap source commit is fe212f797e2efef9dc88bcb5db7cf9db3f9f562e.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/Makefile   |   2 +-
 arch/arm/mach-omap2/memory.c   | 198 -----------------------------------------
 arch/arm/mach-omap2/sdrc2xxx.c | 198 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 199 insertions(+), 199 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/memory.c
 create mode 100644 arch/arm/mach-omap2/sdrc2xxx.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bbd12bc10fd..bb47d43af39 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o sdrc2xxx.o control.o prcm.o clock.o mux.o \
 		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
 		clockdomain.o
 
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
deleted file mode 100644
index 93cb25715ba..00000000000
--- a/arch/arm/mach-omap2/memory.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/memory.c
- *
- * Memory timing related functions for OMAP24XX
- *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Copyright (C) 2005 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-
-#include "prm.h"
-
-#include <mach/sdrc.h>
-#include "sdrc.h"
-
-/* Memory timing, DLL mode flags */
-#define M_DDR		1
-#define M_LOCK_CTRL	(1 << 2)
-#define M_UNLOCK	0
-#define M_LOCK		1
-
-
-void __iomem *omap2_sdrc_base;
-void __iomem *omap2_sms_base;
-
-static struct memory_timings mem_timings;
-static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
-
-u32 omap2_memory_get_slow_dll_ctrl(void)
-{
-	return mem_timings.slow_dll_ctrl;
-}
-
-u32 omap2_memory_get_fast_dll_ctrl(void)
-{
-	return mem_timings.fast_dll_ctrl;
-}
-
-u32 omap2_memory_get_type(void)
-{
-	return mem_timings.m_type;
-}
-
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
- */
-u32 omap2_dll_force_needed(void)
-{
-	/* dlla and dllb are a set */
-	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
-
-	if ((dll_state & (1 << 2)) == (1 << 2))
-		return 1;
-	else
-		return 0;
-}
-
-/*
- * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
- * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
- * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
- */
-u32 omap2_reprogram_sdrc(u32 level, u32 force)
-{
-	u32 dll_ctrl, m_type;
-	u32 prev = curr_perf_level;
-	unsigned long flags;
-
-	if ((curr_perf_level == level) && !force)
-		return prev;
-
-	if (level == CORE_CLK_SRC_DPLL) {
-		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
-	} else if (level == CORE_CLK_SRC_DPLL_X2) {
-		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
-	} else {
-		return prev;
-	}
-
-	m_type = omap2_memory_get_type();
-
-	local_irq_save(flags);
-	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
-	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
-	curr_perf_level = level;
-	local_irq_restore(flags);
-
-	return prev;
-}
-
-#if !defined(CONFIG_ARCH_OMAP2)
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock)
-{
-}
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type)
-{
-}
-#endif
-
-void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
-{
-	unsigned long dll_cnt;
-	u32 fast_dll = 0;
-
-	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
-
-	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
-	 * In the case of 2422, its ok to use CS1 instead of CS0.
-	 */
-	if (cpu_is_omap2422())
-		mem_timings.base_cs = 1;
-	else
-		mem_timings.base_cs = 0;
-
-	if (mem_timings.m_type != M_DDR)
-		return;
-
-	/* With DDR we need to determine the low frequency DLL value */
-	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
-		mem_timings.dll_mode = M_UNLOCK;
-	else
-		mem_timings.dll_mode = M_LOCK;
-
-	if (mem_timings.base_cs == 0) {
-		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
-		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
-	} else {
-		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
-		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
-	}
-	if (force_lock_to_unlock_mode) {
-		fast_dll &= ~0xff00;
-		fast_dll |= dll_cnt;		/* Current lock mode */
-	}
-	/* set fast timings with DLL filter disabled */
-	mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
-
-	/* No disruptions, DDR will be offline & C-ABI not followed */
-	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
-			    mem_timings.fast_dll_ctrl,
-			    mem_timings.base_cs,
-			    force_lock_to_unlock_mode);
-	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
-
-	/* Turn status into unlock ctrl */
-	mem_timings.slow_dll_ctrl |=
-		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
-
-	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
-	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
-}
-
-void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
-{
-	omap2_sdrc_base = omap2_globals->sdrc;
-	omap2_sms_base = omap2_globals->sms;
-}
-
-/* turn on smart idle modes for SDRAM scheduler and controller */
-void __init omap2_init_memory(void)
-{
-	u32 l;
-
-	if (!cpu_is_omap2420())
-		return;
-
-	l = sms_read_reg(SMS_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sms_write_reg(l, SMS_SYSCONFIG);
-
-	l = sdrc_read_reg(SDRC_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sdrc_write_reg(l, SDRC_SYSCONFIG);
-}
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
new file mode 100644
index 00000000000..3e38aa4ea45
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -0,0 +1,198 @@
+/*
+ * linux/arch/arm/mach-omap2/sdrc2xxx.c
+ *
+ * SDRAM timing related functions for OMAP2xxx
+ *
+ * Copyright (C) 2005 Texas Instruments Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+
+#include "prm.h"
+
+#include <mach/sdrc.h>
+#include "sdrc.h"
+
+/* Memory timing, DLL mode flags */
+#define M_DDR		1
+#define M_LOCK_CTRL	(1 << 2)
+#define M_UNLOCK	0
+#define M_LOCK		1
+
+
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
+
+static struct memory_timings mem_timings;
+static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
+
+u32 omap2_memory_get_slow_dll_ctrl(void)
+{
+	return mem_timings.slow_dll_ctrl;
+}
+
+u32 omap2_memory_get_fast_dll_ctrl(void)
+{
+	return mem_timings.fast_dll_ctrl;
+}
+
+u32 omap2_memory_get_type(void)
+{
+	return mem_timings.m_type;
+}
+
+/*
+ * Check the DLL lock state, and return tue if running in unlock mode.
+ * This is needed to compensate for the shifted DLL value in unlock mode.
+ */
+u32 omap2_dll_force_needed(void)
+{
+	/* dlla and dllb are a set */
+	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
+
+	if ((dll_state & (1 << 2)) == (1 << 2))
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
+ * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
+ * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ */
+u32 omap2_reprogram_sdrc(u32 level, u32 force)
+{
+	u32 dll_ctrl, m_type;
+	u32 prev = curr_perf_level;
+	unsigned long flags;
+
+	if ((curr_perf_level == level) && !force)
+		return prev;
+
+	if (level == CORE_CLK_SRC_DPLL)
+		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
+	else if (level == CORE_CLK_SRC_DPLL_X2)
+		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
+	else
+		return prev;
+
+	m_type = omap2_memory_get_type();
+
+	local_irq_save(flags);
+	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
+	curr_perf_level = level;
+	local_irq_restore(flags);
+
+	return prev;
+}
+
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type)
+{
+}
+#endif
+
+void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+{
+	unsigned long dll_cnt;
+	u32 fast_dll = 0;
+
+	/* DDR = 1, SDR = 0 */
+	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
+
+	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
+	 * In the case of 2422, its ok to use CS1 instead of CS0.
+	 */
+	if (cpu_is_omap2422())
+		mem_timings.base_cs = 1;
+	else
+		mem_timings.base_cs = 0;
+
+	if (mem_timings.m_type != M_DDR)
+		return;
+
+	/* With DDR we need to determine the low frequency DLL value */
+	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
+		mem_timings.dll_mode = M_UNLOCK;
+	else
+		mem_timings.dll_mode = M_LOCK;
+
+	if (mem_timings.base_cs == 0) {
+		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
+	} else {
+		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
+	}
+	if (force_lock_to_unlock_mode) {
+		fast_dll &= ~0xff00;
+		fast_dll |= dll_cnt;		/* Current lock mode */
+	}
+	/* set fast timings with DLL filter disabled */
+	mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
+
+	/* No disruptions, DDR will be offline & C-ABI not followed */
+	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
+			    mem_timings.fast_dll_ctrl,
+			    mem_timings.base_cs,
+			    force_lock_to_unlock_mode);
+	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
+
+	/* Turn status into unlock ctrl */
+	mem_timings.slow_dll_ctrl |=
+		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
+
+	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
+	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
+}
+
+void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
+{
+	omap2_sdrc_base = omap2_globals->sdrc;
+	omap2_sms_base = omap2_globals->sms;
+}
+
+/* turn on smart idle modes for SDRAM scheduler and controller */
+void __init omap2_init_memory(void)
+{
+	u32 l;
+
+	if (!cpu_is_omap2420())
+		return;
+
+	l = sms_read_reg(SMS_SYSCONFIG);
+	l &= ~(0x3 << 3);
+	l |= (0x2 << 3);
+	sms_write_reg(l, SMS_SYSCONFIG);
+
+	l = sdrc_read_reg(SDRC_SYSCONFIG);
+	l &= ~(0x3 << 3);
+	l |= (0x2 << 3);
+	sdrc_write_reg(l, SDRC_SYSCONFIG);
+}
-- 
cgit v1.2.3


From f2ab99778a1a04ddbae38f4de4ef40f2edb92080 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:27:37 -0700
Subject: [ARM] OMAP2 SDRC: separate common OMAP2/3 code from OMAP2xxx code

Separate SDRC code common to OMAP2/3 from mach-omap2/sdrc2xxx.c to
mach-omap2/sdrc.c.  Rename the OMAP2xxx-specific functions to use an
'omap2xxx' prefix rather than an 'omap2' prefix, and use "sdrc" in the
function names rather than "memory."  Mark several functions
as static that should not be used outside the sdrc2xxx.c file.

linux-omap source commit is bf1612b9d8d29379558500cd5de9ae0367c41fc4.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/Makefile             |  6 ++-
 arch/arm/mach-omap2/clock24xx.c          | 23 +++++------
 arch/arm/mach-omap2/io.c                 |  2 +-
 arch/arm/mach-omap2/sdrc.c               | 57 +++++++++++++++++++++++++++
 arch/arm/mach-omap2/sdrc2xxx.c           | 67 ++++++++------------------------
 arch/arm/plat-omap/common.c              |  2 +-
 arch/arm/plat-omap/include/mach/common.h |  2 +-
 arch/arm/plat-omap/include/mach/sdrc.h   | 37 +++++++++++-------
 8 files changed, 115 insertions(+), 81 deletions(-)
 create mode 100644 arch/arm/mach-omap2/sdrc.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bb47d43af39..9717afcdbda 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sdrc2xxx.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
 		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
 		clockdomain.o
 
@@ -14,6 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
+# SMS/SDRC
+obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
+# obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
+
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-y					+= pm.o
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 83911ad4873..a11e7c71177 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -389,9 +389,9 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
 
 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
 	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 	} else if (rate != cur_rate) {
 		valid_rate = omap2_dpllcore_round_rate(rate);
 		if (valid_rate != rate)
@@ -430,15 +430,16 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
 			bypass = 1;
 
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+		/* For omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 
 		/* Force dll lock mode */
 		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
 			       bypass);
 
 		/* Errata: ret dll entry state */
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
 	}
 	omap2_dpllcore_recalc(&dpll_ck);
 	ret = 0;
@@ -525,9 +526,9 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
 
 	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
 	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 	} else if (prcm->dpll_speed != cur_rate) {
 		local_irq_save(flags);
 
@@ -558,14 +559,14 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 			cm_write_mod_reg(prcm->cm_clksel_mdm,
 					 OMAP2430_MDM_MOD, CM_CLKSEL);
 
-		/* x2 to enter init_mem */
-		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+		/* x2 to enter omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
 
 		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
 			       bypass);
 
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
 
 		local_irq_restore(flags);
 	}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2b5f28a3c4b..3c1de3615eb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -201,6 +201,6 @@ void __init omap2_init_common_hw(void)
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-	omap2_init_memory();
+	omap2_sdrc_init();
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
new file mode 100644
index 00000000000..24b54d50b89
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -0,0 +1,57 @@
+/*
+ * SMS/SDRC (SDRAM controller) common code for OMAP2/3
+ *
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
+ *
+ * Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+
+#include "prm.h"
+
+#include <mach/sdrc.h>
+#include "sdrc.h"
+
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
+
+void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{
+	omap2_sdrc_base = omap2_globals->sdrc;
+	omap2_sms_base = omap2_globals->sms;
+}
+
+/* turn on smart idle modes for SDRAM scheduler and controller */
+void __init omap2_sdrc_init(void)
+{
+	u32 l;
+
+	l = sms_read_reg(SMS_SYSCONFIG);
+	l &= ~(0x3 << 3);
+	l |= (0x2 << 3);
+	sms_write_reg(l, SMS_SYSCONFIG);
+
+	l = sdrc_read_reg(SDRC_SYSCONFIG);
+	l &= ~(0x3 << 3);
+	l |= (0x2 << 3);
+	sdrc_write_reg(l, SDRC_SYSCONFIG);
+}
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 3e38aa4ea45..3a47aba2903 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -3,11 +3,12 @@
  *
  * SDRAM timing related functions for OMAP2xxx
  *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
  *
- * Copyright (C) 2005 Nokia Corporation
  * Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -39,23 +40,20 @@
 #define M_LOCK		1
 
 
-void __iomem *omap2_sdrc_base;
-void __iomem *omap2_sms_base;
-
 static struct memory_timings mem_timings;
 static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
 
-u32 omap2_memory_get_slow_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
 {
 	return mem_timings.slow_dll_ctrl;
 }
 
-u32 omap2_memory_get_fast_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
 {
 	return mem_timings.fast_dll_ctrl;
 }
 
-u32 omap2_memory_get_type(void)
+static u32 omap2xxx_sdrc_get_type(void)
 {
 	return mem_timings.m_type;
 }
@@ -64,7 +62,7 @@ u32 omap2_memory_get_type(void)
  * Check the DLL lock state, and return tue if running in unlock mode.
  * This is needed to compensate for the shifted DLL value in unlock mode.
  */
-u32 omap2_dll_force_needed(void)
+u32 omap2xxx_sdrc_dll_is_unlocked(void)
 {
 	/* dlla and dllb are a set */
 	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
@@ -79,8 +77,10 @@ u32 omap2_dll_force_needed(void)
  * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
  * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
  * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ *
+ * Used by the clock framework during CORE DPLL changes
  */
-u32 omap2_reprogram_sdrc(u32 level, u32 force)
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 {
 	u32 dll_ctrl, m_type;
 	u32 prev = curr_perf_level;
@@ -90,13 +90,13 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 		return prev;
 
 	if (level == CORE_CLK_SRC_DPLL)
-		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
+		dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
 	else if (level == CORE_CLK_SRC_DPLL_X2)
-		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
+		dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
 	else
 		return prev;
 
-	m_type = omap2_memory_get_type();
+	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
 	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
@@ -107,18 +107,8 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 	return prev;
 }
 
-#if !defined(CONFIG_ARCH_OMAP2)
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock)
-{
-}
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type)
-{
-}
-#endif
-
-void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+/* Used by the clock framework during CORE DPLL changes */
+void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
 	u32 fast_dll = 0;
@@ -171,28 +161,3 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
-
-void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
-{
-	omap2_sdrc_base = omap2_globals->sdrc;
-	omap2_sms_base = omap2_globals->sms;
-}
-
-/* turn on smart idle modes for SDRAM scheduler and controller */
-void __init omap2_init_memory(void)
-{
-	u32 l;
-
-	if (!cpu_is_omap2420())
-		return;
-
-	l = sms_read_reg(SMS_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sms_write_reg(l, SMS_SYSCONFIG);
-
-	l = sdrc_read_reg(SDRC_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sdrc_write_reg(l, SDRC_SYSCONFIG);
-}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 0843b8882f9..187239c054c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -249,7 +249,7 @@ static struct omap_globals *omap2_globals;
 static void __init __omap2_set_globals(void)
 {
 	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_memory(omap2_globals);
+	omap2_set_globals_sdrc(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
 }
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index ef70e2b0f05..f3444a66a57 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -65,7 +65,7 @@ void omap2_set_globals_343x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index c905b5268e5..8e0740eb83f 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -4,10 +4,12 @@
 /*
  * OMAP2/3 SDRC/SMS register definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -64,18 +66,25 @@
  * SMS register access
  */
 
-
-#define OMAP242X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)	IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg)					\
+			(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)					\
+			(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)					\
+			(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
 #define SMS_SYSCONFIG		0x010
 /* REVISIT: fill in other SMS registers here */
 
+
 #ifndef __ASSEMBLER__
 
+void __init omap2_sdrc_init(void);
+
+#ifdef CONFIG_ARCH_OMAP2
+
 struct memory_timings {
 	u32 m_type;		/* ddr = 1, sdr = 0 */
 	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
@@ -84,15 +93,13 @@ struct memory_timings {
 	u32 base_cs;		/* base chip select to use for calculations */
 };
 
-extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
-extern u32 omap2_memory_get_slow_dll_ctrl(void);
-extern u32 omap2_memory_get_fast_dll_ctrl(void);
-extern u32 omap2_memory_get_type(void);
-u32 omap2_dll_force_needed(void);
-u32 omap2_reprogram_sdrc(u32 level, u32 force);
-void __init omap2_init_memory(void);
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
 
-#endif
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif  /* CONFIG_ARCH_OMAP2 */
 
+#endif  /* __ASSEMBLER__ */
 
 #endif
-- 
cgit v1.2.3


From 87246b7567f7d1951bfcea29875523ef435c0ebf Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:27:39 -0700
Subject: [ARM] OMAP2 SDRC: add SDRAM timing parameter infrastructure

For a given SDRAM clock rate, SDRAM chips require memory controllers
to use a specific set of timing minimums and maximums to transfer data
reliably.  These parameters can be different for different memory chips
and can also potentially vary by board.

This patch adds the infrastructure for board-*.c files to pass this
timing data to the SDRAM controller init function.  The timing data is
specified in an 'omap_sdrc_params' structure, in terms of SDRC
controller register values.  An array of these structs, one per SDRC
target clock rate, is passed by the board-*.c file to
omap2_init_common_hw().

This patch does not define the values for different memory chips, nor
does it use the values for anything; those will come in subsequent patches.

linux-omap source commit is bc84ecfc795c2d1c5cda8da4127cf972f488a696.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/board-2430sdp.c     |  2 +-
 arch/arm/mach-omap2/board-apollon.c     |  2 +-
 arch/arm/mach-omap2/board-generic.c     |  2 +-
 arch/arm/mach-omap2/board-h4.c          |  2 +-
 arch/arm/mach-omap2/board-ldp.c         |  2 +-
 arch/arm/mach-omap2/board-omap3beagle.c |  2 +-
 arch/arm/mach-omap2/io.c                |  4 ++--
 arch/arm/mach-omap2/sdrc.c              | 38 ++++++++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/mach/io.h    |  4 +++-
 arch/arm/plat-omap/include/mach/sdrc.h  | 24 ++++++++++++++++++++-
 10 files changed, 71 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 83fa37211d7..7b29e1d00f2 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -185,7 +185,7 @@ out:
 
 static void __init omap_2430sdp_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	sdp2430_init_smc91x();
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 0a7b24ba165..0c911f414d8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -249,7 +249,7 @@ out:
 
 static void __init omap_apollon_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	apollon_init_smc91x();
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3b34c20d1df..3492162a65c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5e9b14675b1..ef55b45ab76 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -363,7 +363,7 @@ static void __init h4_init_flash(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	h4_init_flash();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f6a13451d1f..61f7c365a28 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -98,7 +98,7 @@ static inline void __init ldp_init_smc911x(void)
 
 static void __init omap_ldp_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	ldp_init_smc911x();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 38c88fbe658..ad312ccf2ec 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -184,7 +184,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3c1de3615eb..916fcd3a232 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -195,12 +195,12 @@ void __init omap2_map_common_io(void)
 	omapfb_reserve_sdram();
 }
 
-void __init omap2_init_common_hw(void)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
 {
 	omap2_mux_init();
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-	omap2_sdrc_init();
+	omap2_sdrc_init(sp);
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 24b54d50b89..2a30060cb4b 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -12,6 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -31,9 +32,42 @@
 #include <mach/sdrc.h>
 #include "sdrc.h"
 
+static struct omap_sdrc_params *sdrc_init_params;
+
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+
+/**
+ * omap2_sdrc_get_params - return SDRC register values for a given clock rate
+ * @r: SDRC clock rate (in Hz)
+ *
+ * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
+ * SDRC clock rate 'r'.  These parameters control various timing
+ * delays in the SDRAM controller that are expressed in terms of the
+ * number of SDRC clock cycles to wait; hence the clock rate
+ * dependency. Note that sdrc_init_params must be sorted rate
+ * descending.  Also assumes that both chip-selects use the same
+ * timing parameters.  Returns a struct omap_sdrc_params * upon
+ * success, or NULL upon failure.
+ */
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+{
+	struct omap_sdrc_params *sp;
+
+	sp = sdrc_init_params;
+
+	while (sp->rate != r)
+		sp++;
+
+	if (!sp->rate)
+		return NULL;
+
+	return sp;
+}
+
+
 void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 {
 	omap2_sdrc_base = omap2_globals->sdrc;
@@ -41,7 +75,7 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 }
 
 /* turn on smart idle modes for SDRAM scheduler and controller */
-void __init omap2_sdrc_init(void)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 {
 	u32 l;
 
@@ -54,4 +88,6 @@ void __init omap2_sdrc_init(void)
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
+
+	sdrc_init_params = sp;
 }
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index d92bf796448..0610d7e2b3d 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -185,11 +185,13 @@
 #define omap_writew(v,a)	__raw_writew(v, IO_ADDRESS(a))
 #define omap_writel(v,a)	__raw_writel(v, IO_ADDRESS(a))
 
+struct omap_sdrc_params;
+
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
 extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
 
 #define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
 #define __arch_iounmap(v)	omap_iounmap(v)
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 8e0740eb83f..adc73522491 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -81,7 +81,29 @@
 
 #ifndef __ASSEMBLER__
 
-void __init omap2_sdrc_init(void);
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+	unsigned long rate;
+	u32 actim_ctrla;
+	u32 actim_ctrlb;
+	u32 rfr_ctrl;
+	u32 mr;
+};
+
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
 
 #ifdef CONFIG_ARCH_OMAP2
 
-- 
cgit v1.2.3


From 0eafd4725cf5d828e76e474b8991a228bbdd3f2b Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:27:42 -0700
Subject: [ARM] OMAP3 clock: add omap3_core_dpll_m2_set_rate()

Add the omap3_core_dpll_m2_set_rate() function to the OMAP3 clock code,
which calls into the SRAM function omap3_sram_configure_core_dpll() to
change the CORE DPLL M2 divider.  (SRAM code is necessary since rate changes
on clocks upstream from the SDRC can glitch SDRAM accesses.)

Use this function for the set_rate function pointer in the dpll3_m2_ck
struct clk.  With this function in place, PM/OPP code should be able to
alter SDRAM speed via code similar to:

      clk_set_rate(&dpll3_m2_ck, target_rate).

linux-omap source commit is 7f8b2b0f4fe52238c67d79dedcd2794dcef4dddd.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock34xx.c | 65 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/clock34xx.h |  9 +++---
 2 files changed, 69 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 52385b1506e..1ad0a1359cb 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -634,6 +634,71 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 	return omap3_noncore_dpll_set_rate(clk, rate);
 }
 
+
+/*
+ * CORE DPLL (DPLL3) rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate.  Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	unsigned long validrate, sdrcrate;
+	struct omap_sdrc_params *sp;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	if (clk != &dpll3_m2_ck)
+		return -EINVAL;
+
+	if (rate == clk->rate)
+		return 0;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	sdrcrate = sdrc_ick.rate;
+	if (rate > clk->rate)
+		sdrcrate <<= ((rate / clk->rate) - 1);
+	else
+		sdrcrate >>= ((clk->rate / rate) - 1);
+
+	sp = omap2_sdrc_get_params(sdrcrate);
+	if (!sp)
+		return -EINVAL;
+
+	pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		validrate);
+	pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
+		sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+
+	/* REVISIT: SRAM code doesn't support other M2 divisors yet */
+	WARN_ON(new_div != 1 && new_div != 2);
+
+	/* REVISIT: Add SDRC_MR changing to this code also */
+	local_irq_disable();
+	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
+				  sp->actim_ctrlb, new_div);
+	local_irq_enable();
+
+	omap2_clksel_recalc(clk);
+
+	return 0;
+}
+
+
 static const struct clkops clkops_noncore_dpll_ops = {
 	.enable		= &omap3_noncore_dpll_enable,
 	.disable	= &omap3_noncore_dpll_disable,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index aadd296c05a..681acf0427c 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -34,6 +34,7 @@ static void omap3_dpll_deny_idle(struct clk *clk);
 static u32 omap3_dpll_autoidle_read(struct clk *clk);
 static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
 static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
 
 /* Maximum DPLL multiplier, divider values for OMAP3 */
 #define OMAP3_MAX_DPLL_MULT		2048
@@ -471,11 +472,7 @@ static const struct clksel div31_dpll3m2_clksel[] = {
 	{ .parent = NULL }
 };
 
-/*
- * DPLL3 output M2
- * REVISIT: This DPLL output divider must be changed in SRAM, so until
- * that code is ready, this should remain a 'read-only' clksel clock.
- */
+/* DPLL3 output M2 - primary control point for CORE speed */
 static struct clk dpll3_m2_ck = {
 	.name		= "dpll3_m2_ck",
 	.ops		= &clkops_null,
@@ -486,6 +483,8 @@ static struct clk dpll3_m2_ck = {
 	.clksel		= div31_dpll3m2_clksel,
 	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll3_clkdm",
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap3_core_dpll_m2_set_rate,
 	.recalc		= &omap2_clksel_recalc,
 };
 
-- 
cgit v1.2.3


From 8463e20a58e8b8c88fab948b8610504cbf604294 Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Wed, 28 Jan 2009 12:27:45 -0700
Subject: [ARM] OMAP3: PM: Make sure clk_disable_unused() order is correct

Current implementation will disable clocks in the order defined in clock34xx.h,
at least DPLL4_M2X2 will hang in certain cases (and prevent retention / off)
if clocks are not disabled in correct order. This patch makes sure the parent
clocks will be active when disabling a clock.

linux-omap source commit is 672680063420ef8c8c4e7271984bb9cc08171d29.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 18fddb660ff..478ca660fff 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1000,6 +1000,10 @@ void omap2_clk_disable_unused(struct clk *clk)
 		return;
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
-	_omap2_clk_disable(clk);
+	if (cpu_is_omap34xx()) {
+		omap2_clk_enable(clk);
+		omap2_clk_disable(clk);
+	} else
+		_omap2_clk_disable(clk);
 }
 #endif
-- 
cgit v1.2.3


From 7b0f89d7bba946345fd597110388da5a913e9744 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:27:48 -0700
Subject: [ARM] OMAP2/3 clock: use standard set_rate fn in
 omap2_clk_arch_init()

Use the standard clk_set_rate() function in omap2_clk_arch_init()
rather than omap2_select_table_rate() -- this will ensure that clock
rates are recalculated and propagated correctly after those operations
are consolidated into clk_set_rate().

linux-omap source commit is 03c03330017eeb445b01957608ff5db49a7151b6.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 2 +-
 arch/arm/mach-omap2/clock34xx.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index a11e7c71177..2ce8c0296e8 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -688,7 +688,7 @@ static int __init omap2_clk_arch_init(void)
 	if (!mpurate)
 		return -EINVAL;
 
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 
 	recalculate_root_clocks();
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1ad0a1359cb..06a81febe45 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -866,7 +866,7 @@ static int __init omap2_clk_arch_init(void)
 
 	/* REVISIT: not yet ready for 343x */
 #if 0
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 #endif
 
-- 
cgit v1.2.3


From b5088c0d90b898802318c62caf2320a53df6ce57 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 29 Jan 2009 19:33:19 +0000
Subject: [ARM] omap: clks: call recalc after any rate change

This implements the remainder of:
  OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c
from Paul Walmsley which is not covered by the previous:
  [ARM] omap: move clock propagation into core omap clock code
  [ARM] omap: remove unnecessary calls to propagate_rate()
  [ARM] omap: move propagate_rate() calls into generic omap clock code
commits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c |  2 --
 arch/arm/mach-omap2/clock34xx.c |  4 ----
 arch/arm/plat-omap/clock.c      | 16 ++++++++++++----
 3 files changed, 12 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 2ce8c0296e8..4564ae32ae0 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -441,7 +441,6 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
 		omap2xxx_sdrc_reprogram(done_rate, 0);
 	}
-	omap2_dpllcore_recalc(&dpll_ck);
 	ret = 0;
 
 dpll_exit:
@@ -570,7 +569,6 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 		local_irq_restore(flags);
 	}
-	omap2_dpllcore_recalc(&dpll_ck);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 06a81febe45..75eb2546bb0 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -614,8 +614,6 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
 				   freqsel);
 
-	omap3_dpll_recalc(clk);
-
 	return 0;
 }
 
@@ -693,8 +691,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 				  sp->actim_ctrlb, new_div);
 	local_irq_enable();
 
-	omap2_clksel_recalc(clk);
-
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 5272a2212ab..54da27af0bd 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -140,8 +140,12 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_rate)
 		ret = arch_clock->clk_set_rate(clk, rate);
-	if (ret == 0 && (clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	if (ret == 0) {
+		if (clk->recalc)
+			clk->recalc(clk);
+		if (clk->flags & RATE_PROPAGATES)
+			propagate_rate(clk);
+	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
@@ -159,8 +163,12 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (arch_clock->clk_set_parent)
 		ret = arch_clock->clk_set_parent(clk, parent);
-	if (ret == 0 && (clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
+	if (ret == 0) {
+		if (clk->recalc)
+			clk->recalc(clk);
+		if (clk->flags & RATE_PROPAGATES)
+			propagate_rate(clk);
+	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
-- 
cgit v1.2.3


From 3f0a820c4c0b4670fb5f164baa5582e23c2ef118 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 31 Jan 2009 10:05:51 +0000
Subject: [ARM] omap: create a proper tree of clocks

Traditionally, we've tracked the parent/child relationships between
clk structures by setting the child's parent member to point at the
upstream clock.  As a result, when decending the tree, we have had
to scan all clocks to find the children.

Avoid this wasteful scanning by keeping a list of the clock's children.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             |  3 ++
 arch/arm/mach-omap1/clock.h             |  7 +--
 arch/arm/mach-omap2/clock.c             |  4 +-
 arch/arm/mach-omap2/clock24xx.c         |  3 ++
 arch/arm/mach-omap2/clock24xx.h         | 28 ++++------
 arch/arm/mach-omap2/clock34xx.c         |  3 ++
 arch/arm/mach-omap2/clock34xx.h         | 96 ++++++---------------------------
 arch/arm/plat-omap/clock.c              | 51 +++++++++++-------
 arch/arm/plat-omap/include/mach/clock.h |  7 ++-
 9 files changed, 74 insertions(+), 128 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 1e477af666e..ccf989f4aa7 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -782,6 +782,9 @@ int __init omap1_clk_init(void)
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		clk_init_one(c->lk.clk);
+
 	cpu_mask = 0;
 	if (cpu_is_omap16xx())
 		cpu_mask |= CK_16XX;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 1b4dd056d9b..28bc74e93e8 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -155,7 +155,6 @@ static struct clk ck_dpll1 = {
 	.name		= "ck_dpll1",
 	.ops		= &clkops_null,
 	.parent		= &ck_ref,
-	.flags		= RATE_PROPAGATES,
 };
 
 static struct arm_idlect1_clk ck_dpll1out = {
@@ -163,8 +162,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
 		.name		= "ck_dpll1out",
 		.ops		= &clkops_generic,
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL |
-				  ENABLE_REG_32BIT | RATE_PROPAGATES,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
@@ -187,7 +185,6 @@ static struct clk arm_ck = {
 	.name		= "arm_ck",
 	.ops		= &clkops_null,
 	.parent		= &ck_dpll1,
-	.flags		= RATE_PROPAGATES,
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
@@ -328,7 +325,7 @@ static struct arm_idlect1_clk tc_ck = {
 		.name		= "tc_ck",
 		.ops		= &clkops_null,
 		.parent		= &ck_dpll1,
-		.flags		= RATE_PROPAGATES | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 478ca660fff..38a7898d0ce 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -175,7 +175,7 @@ void omap2_init_clksel_parent(struct clk *clk)
 						 clk->name, clks->parent->name,
 						 ((clk->parent) ?
 						  clk->parent->name : "NULL"));
-					clk->parent = clks->parent;
+					clk_reparent(clk, clks->parent);
 				};
 				found = 1;
 			}
@@ -780,7 +780,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	if (clk->usecount > 0)
 		_omap2_clk_enable(clk);
 
-	clk->parent = new_parent;
+	clk_reparent(clk, new_parent);
 
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
 	clk->rate = new_parent->rate;
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 4564ae32ae0..1a885976c25 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -718,6 +718,9 @@ int __init omap2_clk_init(void)
 	omap2_sys_clk_recalc(&sys_ck);
 	propagate_rate(&sys_ck);
 
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		clk_init_one(c->lk.clk);
+
 	cpu_mask = 0;
 	if (cpu_is_omap2420())
 		cpu_mask |= CK_242X;
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 7731ab6acd1..759489822ee 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -621,7 +621,7 @@ static struct clk func_32k_ck = {
 	.name		= "func_32k_ck",
 	.ops		= &clkops_null,
 	.rate		= 32000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -629,7 +629,6 @@ static struct clk func_32k_ck = {
 static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
 	.name		= "osc_ck",
 	.ops		= &clkops_oscck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_osc_clk_recalc,
 };
@@ -639,7 +638,6 @@ static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
 	.name		= "sys_ck",		/* ~ ref_clk also */
 	.ops		= &clkops_null,
 	.parent		= &osc_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_sys_clk_recalc,
 };
@@ -648,7 +646,7 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.name		= "alt_ck",
 	.ops		= &clkops_null,
 	.rate		= 54000000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -680,7 +678,6 @@ static struct clk dpll_ck = {
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,		/* Can be func_32k also */
 	.dpll_data	= &dpll_dd,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_dpllcore_recalc,
 	.set_rate	= &omap2_reprogram_dpllcore,
@@ -691,7 +688,7 @@ static struct clk apll96_ck = {
 	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.flags		= RATE_FIXED | ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
@@ -702,7 +699,7 @@ static struct clk apll54_ck = {
 	.ops		= &clkops_fixed,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.flags		= RATE_FIXED | ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
@@ -734,7 +731,6 @@ static struct clk func_54m_ck = {
 	.name		= "func_54m_ck",
 	.ops		= &clkops_null,
 	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -747,7 +743,6 @@ static struct clk core_ck = {
 	.name		= "core_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -774,7 +769,6 @@ static struct clk func_96m_ck = {
 	.name		= "func_96m_ck",
 	.ops		= &clkops_null,
 	.parent		= &apll96_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -807,7 +801,6 @@ static struct clk func_48m_ck = {
 	.name		= "func_48m_ck",
 	.ops		= &clkops_null,
 	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -823,7 +816,6 @@ static struct clk func_12m_ck = {
 	.ops		= &clkops_null,
 	.parent		= &func_48m_ck,
 	.fixed_div	= 4,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -876,7 +868,6 @@ static struct clk sys_clkout_src = {
 	.name		= "sys_clkout_src",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
@@ -921,7 +912,6 @@ static struct clk sys_clkout2_src = {
 	.name		= "sys_clkout2_src",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &func_54m_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
 	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
@@ -992,7 +982,7 @@ static struct clk mpu_ck = {	/* Control cpu */
 	.name		= "mpu_ck",
 	.ops		= &clkops_null,
 	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "mpu_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
@@ -1034,7 +1024,7 @@ static struct clk dsp_fck = {
 	.name		= "dsp_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "dsp_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -1102,7 +1092,7 @@ static struct clk iva1_ifck = {
 	.name		= "iva1_ifck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_ck,
-	.flags		= CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
+	.flags		= CONFIG_PARTICIPANT | DELAYED_APP,
 	.clkdm_name	= "iva1_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
@@ -1165,7 +1155,7 @@ static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
 	.name		= "core_l3_ck",
 	.ops		= &clkops_null,
 	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
 	.clkdm_name	= "core_l3_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
@@ -1227,7 +1217,7 @@ static struct clk l4_ck = {		/* used both as an ick and fck */
 	.name		= "l4_ck",
 	.ops		= &clkops_null,
 	.parent		= &core_l3_ck,
-	.flags		= DELAYED_APP | RATE_PROPAGATES,
+	.flags		= DELAYED_APP,
 	.clkdm_name	= "core_l4_clkdm",
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 75eb2546bb0..a853b1e149e 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -903,6 +903,9 @@ int __init omap2_clk_init(void)
 
 	clk_init(&omap2_clk_functions);
 
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		clk_init_one(c->lk.clk);
+
 	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
 		if (c->cpu & cpu_clkflg) {
 			clkdev_add(&c->lk);
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 681acf0427c..2138a58f634 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -60,14 +60,14 @@ static struct clk omap_32k_fck = {
 	.name		= "omap_32k_fck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk secure_32k_fck = {
 	.name		= "secure_32k_fck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 /* Virtual source clocks for osc_sys_ck */
@@ -75,42 +75,42 @@ static struct clk virt_12m_ck = {
 	.name		= "virt_12m_ck",
 	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_13m_ck = {
 	.name		= "virt_13m_ck",
 	.ops		= &clkops_null,
 	.rate		= 13000000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_16_8m_ck = {
 	.name		= "virt_16_8m_ck",
 	.ops		= &clkops_null,
 	.rate		= 16800000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_19_2m_ck = {
 	.name		= "virt_19_2m_ck",
 	.ops		= &clkops_null,
 	.rate		= 19200000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_26m_ck = {
 	.name		= "virt_26m_ck",
 	.ops		= &clkops_null,
 	.rate		= 26000000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_38_4m_ck = {
 	.name		= "virt_38_4m_ck",
 	.ops		= &clkops_null,
 	.rate		= 38400000,
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 };
 
 static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -163,7 +163,7 @@ static struct clk osc_sys_ck = {
 	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
 	.clksel		= osc_sys_clksel,
 	/* REVISIT: deal with autoextclkmode? */
-	.flags		= RATE_FIXED | RATE_PROPAGATES,
+	.flags		= RATE_FIXED,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -188,21 +188,18 @@ static struct clk sys_ck = {
 	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
 	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
 	.clksel		= sys_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk sys_altclk = {
 	.name		= "sys_altclk",
 	.ops		= &clkops_null,
-	.flags		= RATE_PROPAGATES,
 };
 
 /* Optional external clock input for some McBSPs */
 static struct clk mcbsp_clks = {
 	.name		= "mcbsp_clks",
 	.ops		= &clkops_null,
-	.flags		= RATE_PROPAGATES,
 };
 
 /* PRM EXTERNAL CLOCK OUTPUT */
@@ -279,7 +276,6 @@ static struct clk dpll1_ck = {
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll1_dd,
-	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 	.clkdm_name	= "dpll1_clkdm",
@@ -294,7 +290,6 @@ static struct clk dpll1_x2_ck = {
 	.name		= "dpll1_x2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll1_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -317,7 +312,6 @@ static struct clk dpll1_x2m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll1_x2m2_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -353,7 +347,6 @@ static struct clk dpll2_ck = {
 	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll2_dd,
-	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 	.clkdm_name	= "dpll2_clkdm",
@@ -378,7 +371,6 @@ static struct clk dpll2_m2_ck = {
 					  OMAP3430_CM_CLKSEL2_PLL),
 	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div16_dpll2_m2x2_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll2_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -413,7 +405,6 @@ static struct clk dpll3_ck = {
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll3_dd,
-	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_dpll_recalc,
@@ -427,7 +418,6 @@ static struct clk dpll3_x2_ck = {
 	.name		= "dpll3_x2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll3_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -481,7 +471,6 @@ static struct clk dpll3_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
 	.clksel		= div31_dpll3m2_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll3_clkdm",
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap3_core_dpll_m2_set_rate,
@@ -501,7 +490,6 @@ static struct clk core_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= core_ck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -518,7 +506,6 @@ static struct clk dpll3_m2x2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= dpll3_m2x2_ck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -538,7 +525,6 @@ static struct clk dpll3_m3_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
 	.clksel		= div16_dpll3_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -550,7 +536,7 @@ static struct clk dpll3_m3x2_ck = {
 	.parent		= &dpll3_m3_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -569,7 +555,6 @@ static struct clk emu_core_alwon_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
 	.clksel		= emu_core_alwon_ck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -603,7 +588,6 @@ static struct clk dpll4_ck = {
 	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll4_dd,
-	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_dpll4_set_rate,
 	.clkdm_name	= "dpll4_clkdm",
@@ -619,7 +603,6 @@ static struct clk dpll4_x2_ck = {
 	.name		= "dpll4_x2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -638,7 +621,6 @@ static struct clk dpll4_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
 	.clksel_mask	= OMAP3430_DIV_96M_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -650,7 +632,7 @@ static struct clk dpll4_m2x2_ck = {
 	.parent		= &dpll4_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -675,7 +657,6 @@ static struct clk omap_96m_alwon_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= omap_96m_alwon_fck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -683,7 +664,6 @@ static struct clk cm_96m_fck = {
 	.name		= "cm_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -711,7 +691,6 @@ static struct clk omap_96m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
 	.clksel		= omap_96m_fck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -724,7 +703,6 @@ static struct clk dpll4_m3_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -737,7 +715,7 @@ static struct clk dpll4_m3x2_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -756,7 +734,6 @@ static struct clk virt_omap_54m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
 	.clksel		= virt_omap_54m_fck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -783,7 +760,6 @@ static struct clk omap_54m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
 	.clksel		= omap_54m_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -810,7 +786,6 @@ static struct clk omap_48m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
 	.clksel		= omap_48m_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -819,7 +794,6 @@ static struct clk omap_12m_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.fixed_div	= 4,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
 
@@ -832,7 +806,6 @@ static struct clk dpll4_m4_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 	.set_rate	= &omap2_clksel_set_rate,
@@ -846,7 +819,7 @@ static struct clk dpll4_m4x2_ck = {
 	.parent		= &dpll4_m4_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -860,7 +833,6 @@ static struct clk dpll4_m5_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -872,7 +844,7 @@ static struct clk dpll4_m5x2_ck = {
 	.parent		= &dpll4_m5_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -886,7 +858,6 @@ static struct clk dpll4_m6_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
 	.clksel		= div16_dpll4_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -899,7 +870,7 @@ static struct clk dpll4_m6x2_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= RATE_PROPAGATES | INVERT_ENABLE,
+	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,
 };
@@ -908,7 +879,6 @@ static struct clk emu_per_alwon_ck = {
 	.name		= "emu_per_alwon_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_m6x2_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -943,7 +913,6 @@ static struct clk dpll5_ck = {
 	.ops		= &clkops_noncore_dpll_ops,
 	.parent		= &sys_ck,
 	.dpll_data	= &dpll5_dd,
-	.flags		= RATE_PROPAGATES,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 	.clkdm_name	= "dpll5_clkdm",
@@ -963,7 +932,6 @@ static struct clk dpll5_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "dpll5_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -982,7 +950,6 @@ static struct clk omap_120m_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
 	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
 	.clksel		= omap_120m_fck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1025,7 +992,6 @@ static struct clk clkout2_src_ck = {
 	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
 	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
 	.clksel		= clkout2_src_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1060,7 +1026,6 @@ static struct clk corex2_fck = {
 	.name		= "corex2_fck",
 	.ops		= &clkops_null,
 	.parent		= &dpll3_m2x2_ck,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1090,7 +1055,6 @@ static struct clk dpll1_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
 	.clksel		= div4_core_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1114,7 +1078,6 @@ static struct clk mpu_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= mpu_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1139,7 +1102,6 @@ static struct clk arm_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1153,7 +1115,6 @@ static struct clk emu_mpu_alwon_ck = {
 	.name		= "emu_mpu_alwon_ck",
 	.ops		= &clkops_null,
 	.parent		= &mpu_ck,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1165,7 +1126,6 @@ static struct clk dpll2_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
 	.clksel		= div4_core_clksel,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1193,7 +1153,6 @@ static struct clk iva2_ck = {
 					  OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.clksel		= iva2_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "iva2_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1213,7 +1172,6 @@ static struct clk l3_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
 	.clksel		= div2_core_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1231,7 +1189,6 @@ static struct clk l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
 	.clksel		= div2_l3_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 
@@ -1281,7 +1238,6 @@ static struct clk gfx_l3_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
 	.clksel		= gfx_l3_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "gfx_3430es1_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1440,7 +1396,6 @@ static struct clk core_96m_fck = {
 	.name		= "core_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_fck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1574,7 +1529,6 @@ static struct clk core_48m_fck = {
 	.name		= "core_48m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1652,7 +1606,6 @@ static struct clk core_12m_fck = {
 	.name		= "core_12m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_12m_fck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1692,7 +1645,6 @@ static struct clk ssi_ssr_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
 	.clksel		= ssi_ssr_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1718,7 +1670,6 @@ static struct clk core_l3_ick = {
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1759,7 +1710,6 @@ static struct clk security_l3_ick = {
 	.name		= "security_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1779,7 +1729,6 @@ static struct clk core_l4_ick = {
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2062,7 +2011,6 @@ static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2106,7 +2054,6 @@ static struct clk security_l4_ick2 = {
 	.name		= "security_l4_ick2",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2350,7 +2297,6 @@ static struct clk wkup_32k_fck = {
 	.ops		= &clkops_null,
 	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2379,7 +2325,6 @@ static struct clk wkup_l4_ick = {
 	.name		= "wkup_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &sys_ck,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2466,7 +2411,6 @@ static struct clk per_96m_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2476,7 +2420,6 @@ static struct clk per_48m_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2600,7 +2543,6 @@ static struct clk per_32k_alwon_fck = {
 	.ops		= &clkops_null,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "per_clkdm",
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2668,7 +2610,6 @@ static struct clk per_l4_ick = {
 	.name		= "per_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2948,7 +2889,6 @@ static struct clk emu_src_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2973,7 +2913,6 @@ static struct clk pclk_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
 	.clksel		= pclk_emu_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -2997,7 +2936,6 @@ static struct clk pclkx2_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
 	.clksel		= pclkx2_emu_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3014,7 +2952,6 @@ static struct clk atclk_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
 	.clksel		= atclk_emu_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3026,7 +2963,6 @@ static struct clk traceclk_src_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
 	.clksel		= emu_src_clksel,
-	.flags		= RATE_PROPAGATES,
 	.clkdm_name	= "emu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -3063,7 +2999,6 @@ static struct clk sr1_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
@@ -3074,7 +3009,6 @@ static struct clk sr2_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.flags		= RATE_PROPAGATES,
 	.recalc		= &followparent_recalc,
 };
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 54da27af0bd..6a1737a7447 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -143,8 +143,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (ret == 0) {
 		if (clk->recalc)
 			clk->recalc(clk);
-		if (clk->flags & RATE_PROPAGATES)
-			propagate_rate(clk);
+		propagate_rate(clk);
 	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
@@ -166,8 +165,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	if (ret == 0) {
 		if (clk->recalc)
 			clk->recalc(clk);
-		if (clk->flags & RATE_PROPAGATES)
-			propagate_rate(clk);
+		propagate_rate(clk);
 	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
@@ -214,24 +212,31 @@ void followparent_recalc(struct clk *clk)
 	clk->rate = clk->parent->rate;
 }
 
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+	list_del_init(&child->sibling);
+	if (parent)
+		list_add(&child->sibling, &parent->children);
+	child->parent = parent;
+
+	/* now do the debugfs renaming to reattach the child
+	   to the proper parent */
+}
+
 /* Propagate rate to children */
 void propagate_rate(struct clk * tclk)
 {
 	struct clk *clkp;
 
-	if (tclk == NULL || IS_ERR(tclk))
-		return;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		if (likely(clkp->parent != tclk))
-			continue;
+	list_for_each_entry(clkp, &tclk->children, sibling) {
 		if (clkp->recalc)
 			clkp->recalc(clkp);
-		if (clkp->flags & RATE_PROPAGATES)
-			propagate_rate(clkp);
+		propagate_rate(clkp);
 	}
 }
 
+static LIST_HEAD(root_clks);
+
 /**
  * recalculate_root_clocks - recalculate and propagate all root clocks
  *
@@ -243,16 +248,18 @@ void recalculate_root_clocks(void)
 {
 	struct clk *clkp;
 
-	list_for_each_entry(clkp, &clocks, node) {
-		if (!clkp->parent) {
-			if (clkp->recalc)
-				clkp->recalc(clkp);
-			if (clkp->flags & RATE_PROPAGATES)
-				propagate_rate(clkp);
-		}
+	list_for_each_entry(clkp, &root_clks, sibling) {
+		if (clkp->recalc)
+			clkp->recalc(clkp);
+		propagate_rate(clkp);
 	}
 }
 
+void clk_init_one(struct clk *clk)
+{
+	INIT_LIST_HEAD(&clk->children);
+}
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -265,6 +272,11 @@ int clk_register(struct clk *clk)
 		return 0;
 
 	mutex_lock(&clocks_mutex);
+	if (clk->parent)
+		list_add(&clk->sibling, &clk->parent->children);
+	else
+		list_add(&clk->sibling, &root_clks);
+
 	list_add(&clk->node, &clocks);
 	if (clk->init)
 		clk->init(clk);
@@ -280,6 +292,7 @@ void clk_unregister(struct clk *clk)
 		return;
 
 	mutex_lock(&clocks_mutex);
+	list_del(&clk->sibling);
 	list_del(&clk->node);
 	mutex_unlock(&clocks_mutex);
 }
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 8705902de1d..af6ae4fa46d 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -70,6 +70,8 @@ struct clk {
 	const char		*name;
 	int			id;
 	struct clk		*parent;
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
 	unsigned long		rate;
 	__u32			flags;
 	void __iomem		*enable_reg;
@@ -115,7 +117,9 @@ struct clk_functions {
 extern unsigned int mpurate;
 
 extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_init_one(struct clk *clk);
 extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
@@ -131,8 +135,7 @@ extern const struct clkops clkops_null;
 /* Clock flags */
 /* bit 0 is free */
 #define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
-#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-/* bits 3-4 are free */
+/* bits 2-4 are free */
 #define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
 #define CLOCK_IDLE_CONTROL	(1 << 7)
 #define CLOCK_NO_IDLE_PARENT	(1 << 8)
-- 
cgit v1.2.3


From de07fedd79999668c4c112a2ba3eaf3d7434235c Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:35:01 -0700
Subject: [ARM] OMAP2/3 clock: don't use a barrier after clk_disable()

clk_disable() previously used an ARM barrier, wmb(), to try to ensure
that the hardware write completed before continuing.  There are some
problems with this approach.

The first problem is that wmb() only ensures that the write leaves the
ARM -- not that it actually reaches the endpoint device.  In this
case, the endpoint device - either the PRM, CM, or SCM - is three
interconnects away from the ARM, and the final interconnect is
low-speed.  And the OCP interconnects will post the write, who knows
how long that will take to complete.  So the wmb() is not really what
we want.

Worse, the wmb() is indiscriminate; it will cause the ARM to flush any
other unrelated buffered writes and wait for the local interconnect to
acknowledge them - potentially very expensive.

This first problem could be fixed by doing a readback of the same PRM/CM/SCM
register.  Since these devices use a single OCP thread, this will cause the
MPU to wait for the write to complete.

But the primary problem is a conceptual one: clk_disable() should not
need any kind of barrier.  clk_enable() needs one since device driver
code must not access a device until its clocks are known to be
enabled.  But clk_disable() has no such restriction.

Since blocking the MPU on a PRM/CM/SCM write can be a very
high-latency operation - several hundred MPU cycles - it's worth
avoiding this barrier if possible.

linux-omap source commit is f4aacad2c0ed1055622d5c1e910befece24ef0e2.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a7898d0ce..0803c8c811f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -353,7 +353,7 @@ static void omap2_dflt_clk_disable(struct clk *clk)
 	else
 		v &= ~(1 << clk->enable_bit);
 	__raw_writel(v, clk->enable_reg);
-	wmb();
+	/* No OCP barrier needed here since it is a disable operation */
 }
 
 const struct clkops clkops_omap2_dflt_wait = {
-- 
cgit v1.2.3


From 439764cc18beb20ef409991e75e29b460db71d33 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:35:03 -0700
Subject: [ARM] OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix
 barrier

Consolidate the commit code for DELAYED_APP clocks into a subroutine,
_omap2xxx_clk_commit().  Also convert the MPU barrier wmb() into an
OCP barrier, since with an MPU barrier, we have no guarantee that the
write actually reached the endpoint device.

linux-omap source commit is 0f5bdb736515801b296125d16937a21ff7b3cfdc.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 0803c8c811f..7f12230fef7 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -74,6 +74,28 @@ u8 cpu_mask;
  * OMAP2/3 specific clock functions
  *-------------------------------------------------------------------------*/
 
+/**
+ * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
+ * @clk: struct clk *
+ *
+ * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
+ * don't take effect until the VALID_CONFIG bit is written, write the
+ * VALID_CONFIG bit and wait for the write to complete.  No return value.
+ */
+static void _omap2xxx_clk_commit(struct clk *clk)
+{
+	if (!cpu_is_omap24xx())
+		return;
+
+	if (!(clk->flags & DELAYED_APP))
+		return;
+
+	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
+		OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+	/* OCP barrier */
+	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+}
+
 /*
  * _dpll_test_fint - test whether an Fint value is valid for the DPLL
  * @clk: DPLL struct clk to test
@@ -685,11 +707,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 
 	clk->rate = clk->parent->rate / new_div;
 
-	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-		prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
-			OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
-		wmb();
-	}
+	_omap2xxx_clk_commit(clk);
 
 	return 0;
 }
@@ -772,10 +790,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	__raw_writel(v, clk->clksel_reg);
 	wmb();
 
-	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
-		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
-		wmb();
-	}
+	_omap2xxx_clk_commit(clk);
 
 	if (clk->usecount > 0)
 		_omap2_clk_enable(clk);
-- 
cgit v1.2.3


From f11fda6a9173e8e6b152ba5cb26fa20095a4c60f Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:35:06 -0700
Subject: [ARM] OMAP2/3 clock: convert remaining MPU barriers into OCP barriers

Several parts of the OMAP2/3 clock code use wmb() to try to ensure
that the hardware write completes before continuing.  This approach is
problematic: wmb() only ensures that the write leaves the ARM.  It
does not ensure that the write actually reaches the endpoint device.
The endpoint device in this case - either the PRM, CM, or SCM - is
three interconnects away from the ARM - and the final interconnect is
low-speed.  And the OCP interconnects will post the write, and who
knows how long that will take to complete.  So the wmb() is not what
we want.  Worse, the wmb() is indiscriminate; it causes the ARM to
flush any other unrelated buffered writes and wait for the local
interconnect to acknowledge them - potentially very expensive.

Fix this by converting the wmb()s into readbacks of the same PRM/CM/SCM
register.  Since the PRM/CM/SCM devices use a single OCP thread, this
will cause the MPU to block while waiting for posted writes to that device
to complete.

linux-omap source commit is 260f5487848681b4d8ea7430a709a601bbcb21d1.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7f12230fef7..666274a8b10 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -334,7 +334,7 @@ static int omap2_dflt_clk_enable(struct clk *clk)
 	else
 		v |= (1 << clk->enable_bit);
 	__raw_writel(v, clk->enable_reg);
-	wmb();
+	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
 	return 0;
 }
@@ -703,7 +703,7 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 	v &= ~clk->clksel_mask;
 	v |= field_val << __ffs(clk->clksel_mask);
 	__raw_writel(v, clk->clksel_reg);
-	wmb();
+	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
 
 	clk->rate = clk->parent->rate / new_div;
 
@@ -788,7 +788,7 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	v &= ~clk->clksel_mask;
 	v |= field_val << __ffs(clk->clksel_mask);
 	__raw_writel(v, clk->clksel_reg);
-	wmb();
+	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
 
 	_omap2xxx_clk_commit(clk);
 
-- 
cgit v1.2.3


From be5f34b77355b9b1720a88390e51441ef578720b Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:35:09 -0700
Subject: [ARM] OMAP clock: drop clk_get_usecount()

This function is race-prone and mistakenly conveys the impression to
drivers that it is part of the clock interface.  Get rid of it: core
code that absolutely needs this can just check clk->usecount.  Drivers
should not use it at all.

linux-omap source commit is 5df9e4adc2f6a6d55aca53ee27b8baad18897c05.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/clock.c              | 16 ----------------
 arch/arm/plat-omap/include/mach/clock.h |  1 -
 2 files changed, 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 6a1737a7447..9833d73511a 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -76,22 +76,6 @@ out:
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_get_usecount(struct clk *clk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = clk->usecount;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long flags;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index af6ae4fa46d..0ba28462a49 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -124,7 +124,6 @@ extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
 extern void followparent_recalc(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 #ifdef CONFIG_CPU_FREQ
 extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-- 
cgit v1.2.3


From a7f8c599c570fc0e2396e8fdccaeeeaefc41dac8 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 31 Jan 2009 11:00:17 +0000
Subject: [ARM] omap: fix usecount decrement bug

Based upon a patch from Paul Walmsley <paul@pwsan.com>:

 If _omap2_clk_enable() fails, the clock's usecount must be decremented
 by one no matter whether the clock has a parent or not.

but reorganised a bit.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 666274a8b10..222c2c0d4a6 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -419,30 +419,30 @@ int omap2_clk_enable(struct clk *clk)
 	int ret = 0;
 
 	if (clk->usecount++ == 0) {
-		if (clk->parent)
+		if (clk->parent) {
 			ret = omap2_clk_enable(clk->parent);
-
-		if (ret != 0) {
-			clk->usecount--;
-			return ret;
+			if (ret)
+				goto err;
 		}
 
 		if (clk->clkdm)
 			omap2_clkdm_clk_enable(clk->clkdm, clk);
 
 		ret = _omap2_clk_enable(clk);
-
-		if (ret != 0) {
+		if (ret) {
 			if (clk->clkdm)
 				omap2_clkdm_clk_disable(clk->clkdm, clk);
 
-			if (clk->parent) {
+			if (clk->parent)
 				omap2_clk_disable(clk->parent);
-				clk->usecount--;
-			}
+
+			goto err;
 		}
 	}
+	return ret;
 
+err:
+	clk->usecount--;
 	return ret;
 }
 
-- 
cgit v1.2.3


From 8263e5b31eae2bbf689ff08a7da334329c9f353b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 31 Jan 2009 11:02:37 +0000
Subject: [ARM] omap: fix clockdomain enable/disable ordering

Based on a patch from Paul Walmsley <paul@pwsan.com>:

 omap2_clk_enable() should enable a clock's clockdomain before
 attempting to enable its parent clock's clockdomain.  Similarly, in
 the unlikely event that the parent clock enable fails, the clockdomain
 should be disabled.

 linux-omap source commit is 6d6e285e5a7912b1ea68fadac387304c914aaba8.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 222c2c0d4a6..1b40d757500 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -419,20 +419,17 @@ int omap2_clk_enable(struct clk *clk)
 	int ret = 0;
 
 	if (clk->usecount++ == 0) {
+		if (clk->clkdm)
+			omap2_clkdm_clk_enable(clk->clkdm, clk);
+
 		if (clk->parent) {
 			ret = omap2_clk_enable(clk->parent);
 			if (ret)
 				goto err;
 		}
 
-		if (clk->clkdm)
-			omap2_clkdm_clk_enable(clk->clkdm, clk);
-
 		ret = _omap2_clk_enable(clk);
 		if (ret) {
-			if (clk->clkdm)
-				omap2_clkdm_clk_disable(clk->clkdm, clk);
-
 			if (clk->parent)
 				omap2_clk_disable(clk->parent);
 
@@ -442,6 +439,8 @@ int omap2_clk_enable(struct clk *clk)
 	return ret;
 
 err:
+	if (clk->clkdm)
+		omap2_clkdm_clk_disable(clk->clkdm, clk);
 	clk->usecount--;
 	return ret;
 }
-- 
cgit v1.2.3


From 883992bd8f6924c9aa849f2dac381075e2e55a9d Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 28 Jan 2009 12:35:31 -0700
Subject: [ARM] OMAP2/3 clock: don't tinker with hardirqs when they are
 supposed to be disabled

Clock rate change code executes inside a spinlock with hardirqs
disabled.  The only code that should be messing around with the
hardirq state should be the plat-omap/clock.c code.  In the
omap2_reprogram_dpllcore() case, this probably just wastes cycles, but
in the omap3_core_dpll_m2_set_rate() case, this is a nasty bug.

linux-omap source commit is b9b6208dadb5e0d8b290900a3ffa911673ca97ed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock24xx.c | 12 +++---------
 arch/arm/mach-omap2/clock34xx.c |  2 --
 2 files changed, 3 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 1a885976c25..069f3e1827a 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -380,10 +380,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	u32 bypass = 0;
 	struct prcm_config tmpset;
 	const struct dpll_data *dd;
-	unsigned long flags;
-	int ret = -EINVAL;
 
-	local_irq_save(flags);
 	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
 	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
@@ -395,7 +392,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	} else if (rate != cur_rate) {
 		valid_rate = omap2_dpllcore_round_rate(rate);
 		if (valid_rate != rate)
-			goto dpll_exit;
+			return -EINVAL;
 
 		if (mult == 1)
 			low = curr_prcm_set->dpll_speed;
@@ -404,7 +401,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 
 		dd = clk->dpll_data;
 		if (!dd)
-			goto dpll_exit;
+			return -EINVAL;
 
 		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
@@ -441,11 +438,8 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
 		omap2xxx_sdrc_reprogram(done_rate, 0);
 	}
-	ret = 0;
 
-dpll_exit:
-	local_irq_restore(flags);
-	return(ret);
+	return 0;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index a853b1e149e..3b6e27bc9fe 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -686,10 +686,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	WARN_ON(new_div != 1 && new_div != 2);
 
 	/* REVISIT: Add SDRC_MR changing to this code also */
-	local_irq_disable();
 	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
 				  sp->actim_ctrlb, new_div);
-	local_irq_enable();
 
 	return 0;
 }
-- 
cgit v1.2.3


From 4e7f78f815412fd25b207b8c63a698b637c9621d Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Thu, 5 Feb 2009 17:48:19 +0100
Subject: pxa/h5000: Setup I2S pins for pxa2xx-i2s

The iPAQ h5000 has an AK4535 codec connected as I2S slave,
PXA I2S providing SYSCLK.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/h5000.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index da6e4422c0f..295ec413d80 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -153,6 +153,13 @@ static unsigned long h5000_pin_config[] __initdata = {
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
 };
 
 /*
-- 
cgit v1.2.3


From 772885c1dc42f1992ac4fc937f1ed4ae9d42a31e Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Thu, 5 Feb 2009 17:48:20 +0100
Subject: pxa/spitz: Setup I2S pins for pxa2xx-i2s

The spitz has a WM8750 codec connected as I2S slave but doesn't use the
PXA I2S system clock.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/spitz.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 6d447c9ce8a..0d62d311d41 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -105,6 +105,12 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO57_nIOIS16,
 	GPIO104_PSKTSEL,
 
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,
-- 
cgit v1.2.3


From f1ee5548a6507d2b4293635c61ddbf12e2c00e94 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 8 Feb 2009 16:18:03 -0800
Subject: x86/irq: optimize nr_irqs

Impact: make nr_irqs depend more on cards used in a system

depend on nr_irq_gsi more, and have a ratio for MSI.

v2: make nr_irqs less than NR_VECTORS * nr_cpu_ids
    aka if only one cpu, we only can support nr_irqs = NR_VECTORS

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/io_apic.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 9578d33f20a..43f95d7b13a 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3479,9 +3479,9 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	sub_handle = 0;
 	list_for_each_entry(msidesc, &dev->msi_list, list) {
 		irq = create_irq_nr(irq_want);
-		irq_want++;
 		if (irq == 0)
 			return -1;
+		irq_want = irq + 1;
 #ifdef CONFIG_INTR_REMAP
 		if (!intr_remapping_enabled)
 			goto no_ir;
@@ -3825,11 +3825,17 @@ int __init arch_probe_nr_irqs(void)
 {
 	int nr;
 
-	nr = ((8 * nr_cpu_ids) > (32 * nr_ioapics) ?
-		(NR_VECTORS + (8 * nr_cpu_ids)) :
-		(NR_VECTORS + (32 * nr_ioapics)));
+	if (nr_irqs > (NR_VECTORS * nr_cpu_ids))
+		nr_irqs = NR_VECTORS * nr_cpu_ids;
 
-	if (nr < nr_irqs && nr > nr_irqs_gsi)
+	nr = nr_irqs_gsi + 8 * nr_cpu_ids;
+#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
+	/*
+	 * for MSI and HT dyn irq
+	 */
+	nr += nr_irqs_gsi * 16;
+#endif
+	if (nr < nr_irqs)
 		nr_irqs = nr;
 
 	return 0;
-- 
cgit v1.2.3


From abcaa2b8319a7673e76c2391cb5de3045ab1b401 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 8 Feb 2009 16:18:03 -0800
Subject: x86: use NR_IRQS_LEGACY to replace 16

Impact: cleanup

also could kill platform_legacy_irq

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/hw_irq.h | 4 +---
 arch/x86/kernel/io_apic.c     | 8 ++++----
 2 files changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 1a20e3d1200..1b82781b898 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -25,8 +25,6 @@
 #include <asm/irq.h>
 #include <asm/sections.h>
 
-#define platform_legacy_irq(irq)	((irq) < 16)
-
 /* Interrupt handlers registered during init_IRQ */
 extern void apic_timer_interrupt(void);
 extern void error_interrupt(void);
@@ -58,7 +56,7 @@ extern void make_8259A_irq(unsigned int irq);
 extern void init_8259A(int aeoi);
 
 /* IOAPIC */
-#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
+#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
 extern unsigned long io_apic_irqs;
 
 extern void init_VISWS_APIC_irqs(void);
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 43f95d7b13a..e5be9f35ea5 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3165,6 +3165,7 @@ static int __init ioapic_init_sysfs(void)
 
 device_initcall(ioapic_init_sysfs);
 
+static int nr_irqs_gsi = NR_IRQS_LEGACY;
 /*
  * Dynamic irq allocate and deallocation
  */
@@ -3179,11 +3180,11 @@ unsigned int create_irq_nr(unsigned int irq_want)
 	struct irq_desc *desc_new = NULL;
 
 	irq = 0;
+	if (irq_want < nr_irqs_gsi)
+		irq_want = nr_irqs_gsi;
+
 	spin_lock_irqsave(&vector_lock, flags);
 	for (new = irq_want; new < nr_irqs; new++) {
-		if (platform_legacy_irq(new))
-			continue;
-
 		desc_new = irq_to_desc_alloc_cpu(new, cpu);
 		if (!desc_new) {
 			printk(KERN_INFO "can not get irq_desc for %d\n", new);
@@ -3208,7 +3209,6 @@ unsigned int create_irq_nr(unsigned int irq_want)
 	return irq;
 }
 
-static int nr_irqs_gsi = NR_IRQS_LEGACY;
 int create_irq(void)
 {
 	unsigned int irq_want;
-- 
cgit v1.2.3


From f72dccace737df74d04a96461785a3ad61724b9f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 8 Feb 2009 16:18:03 -0800
Subject: x86: check_timer cleanup

Impact: make check-timer more robust potentially solve boot fragility

For edge trigger io-apic routing, we already unmasked the pin via
setup_IO_APIC_irq(), so don't unmask it again.

Also call local_irq_disable() between timer_irq_works(), because it
calls local_irq_enable() inside.

Also remove not needed apic version reading for 64-bit

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/io_apic.c | 30 ++++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index e5be9f35ea5..855209a1b17 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -1657,7 +1657,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
 	 * to the first CPU.
 	 */
 	entry.dest_mode = apic->irq_dest_mode;
-	entry.mask = 1;					/* mask IRQ now */
+	entry.mask = 0;			/* don't mask IRQ for edge */
 	entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus());
 	entry.delivery_mode = apic->irq_delivery_mode;
 	entry.polarity = 0;
@@ -2863,14 +2863,10 @@ static inline void __init check_timer(void)
 	int cpu = boot_cpu_id;
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
-	unsigned int ver;
 	int no_pin1 = 0;
 
 	local_irq_save(flags);
 
-	ver = apic_read(APIC_LVR);
-	ver = GET_APIC_VERSION(ver);
-
 	/*
 	 * get/set the timer IRQ vector:
 	 */
@@ -2889,7 +2885,13 @@ static inline void __init check_timer(void)
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
 #ifdef CONFIG_X86_32
-	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+	{
+		unsigned int ver;
+
+		ver = apic_read(APIC_LVR);
+		ver = GET_APIC_VERSION(ver);
+		timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+	}
 #endif
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
@@ -2928,8 +2930,17 @@ static inline void __init check_timer(void)
 		if (no_pin1) {
 			add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
 			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+		} else {
+			/* for edge trigger, setup_IO_APIC_irq already
+			 * leave it unmasked.
+			 * so only need to unmask if it is level-trigger
+			 * do we really have level trigger timer?
+			 */
+			int idx;
+			idx = find_irq_entry(apic1, pin1, mp_INT);
+			if (idx != -1 && irq_trigger(idx))
+				unmask_IO_APIC_irq_desc(desc);
 		}
-		unmask_IO_APIC_irq_desc(desc);
 		if (timer_irq_works()) {
 			if (nmi_watchdog == NMI_IO_APIC) {
 				setup_nmi();
@@ -2943,6 +2954,7 @@ static inline void __init check_timer(void)
 		if (intr_remapping_enabled)
 			panic("timer doesn't work through Interrupt-remapped IO-APIC");
 #endif
+		local_irq_disable();
 		clear_IO_APIC_pin(apic1, pin1);
 		if (!no_pin1)
 			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
@@ -2957,7 +2969,6 @@ static inline void __init check_timer(void)
 		 */
 		replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
 		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
-		unmask_IO_APIC_irq_desc(desc);
 		enable_8259A_irq(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2972,6 +2983,7 @@ static inline void __init check_timer(void)
 		/*
 		 * Cleanup, just in case ...
 		 */
+		local_irq_disable();
 		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
 		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
@@ -2997,6 +3009,7 @@ static inline void __init check_timer(void)
 		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
+	local_irq_disable();
 	disable_8259A_irq(0);
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
 	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
@@ -3014,6 +3027,7 @@ static inline void __init check_timer(void)
 		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
+	local_irq_disable();
 	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
 	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
 		"report.  Then try booting with the 'noapic' option.\n");
-- 
cgit v1.2.3


From cc6c50066ec1ac98bef97117e2f078bb89bbccc7 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 8 Feb 2009 16:18:03 -0800
Subject: x86: find nr_irqs_gsi with mp_ioapic_routing

Impact: find right nr_irqs_gsi on some systems.

One test-system has gap between gsi's:

[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48])
[    0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56])
[    0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62
...
[    0.000000] nr_irqs_gsi: 38

So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic.

need to get that with acpi_probe_gsi when acpi io_apic is used

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mpspec.h |  6 ++++++
 arch/x86/kernel/acpi/boot.c   | 23 +++++++++++++++++++++++
 arch/x86/kernel/io_apic.c     | 20 +++++++++++++++-----
 3 files changed, 44 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index d22f732eab8..8c5620147c4 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -73,6 +73,7 @@ extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
 				   u32 gsi);
 extern void mp_config_acpi_legacy_irqs(void);
 extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+extern int acpi_probe_gsi(void);
 #ifdef CONFIG_X86_IO_APIC
 extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 				u32 gsi, int triggering, int polarity);
@@ -84,6 +85,11 @@ mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 	return 0;
 }
 #endif
+#else /* !CONFIG_ACPI: */
+static inline int acpi_probe_gsi(void)
+{
+	return 0;
+}
 #endif /* CONFIG_ACPI */
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 3efa996b036..c334fe75dcd 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -961,6 +961,29 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	nr_ioapics++;
 }
 
+int __init acpi_probe_gsi(void)
+{
+	int idx;
+	int gsi;
+	int max_gsi = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	if (!acpi_ioapic)
+		return 0;
+
+	max_gsi = 0;
+	for (idx = 0; idx < nr_ioapics; idx++) {
+		gsi = mp_ioapic_routing[idx].gsi_end;
+
+		if (gsi > max_gsi)
+			max_gsi = gsi;
+	}
+
+	return max_gsi + 1;
+}
+
 static void assign_to_mp_irq(struct mpc_intsrc *m,
 				    struct mpc_intsrc *mp_irq)
 {
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 855209a1b17..56e51eb551a 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3824,14 +3824,24 @@ int __init io_apic_get_redir_entries (int ioapic)
 
 void __init probe_nr_irqs_gsi(void)
 {
-	int idx;
 	int nr = 0;
 
-	for (idx = 0; idx < nr_ioapics; idx++)
-		nr += io_apic_get_redir_entries(idx) + 1;
-
-	if (nr > nr_irqs_gsi)
+	nr = acpi_probe_gsi();
+	if (nr > nr_irqs_gsi) {
 		nr_irqs_gsi = nr;
+	} else {
+		/* for acpi=off or acpi is not compiled in */
+		int idx;
+
+		nr = 0;
+		for (idx = 0; idx < nr_ioapics; idx++)
+			nr += io_apic_get_redir_entries(idx) + 1;
+
+		if (nr > nr_irqs_gsi)
+			nr_irqs_gsi = nr;
+	}
+
+	printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
 }
 
 #ifdef CONFIG_SPARSE_IRQ
-- 
cgit v1.2.3


From 2c344e9d6e1938fdf15e93c56d6fe42f8410e9d3 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@infradead.org>
Date: Sat, 7 Feb 2009 12:23:37 -0800
Subject: x86: don't pretend that non-framepointer stack traces are reliable

Without frame pointers enabled, the x86 stack traces should not
pretend to be reliable; instead they should just be what they are:
unreliable.

The effect of this is that they have a '?' printed in the stacktrace,
to warn the reader that these entries are guesses rather than known
based on more reliable information.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/dumpstack.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 6b1f6f6f866..87d103ded1c 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -99,7 +99,7 @@ print_context_stack(struct thread_info *tinfo,
 				frame = frame->next_frame;
 				bp = (unsigned long) frame;
 			} else {
-				ops->address(data, addr, bp == 0);
+				ops->address(data, addr, 0);
 			}
 			print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
 		}
-- 
cgit v1.2.3


From d3770449d3cb058b94ca1d050d5ced4a66c75ce4 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Sun, 8 Feb 2009 09:58:38 -0500
Subject: percpu: make PER_CPU_BASE_SECTION overridable by arches

Impact: bug fix

IA-64 needs to put percpu data in the seperate section even on UP.
Fixes regression caused by "percpu: refactor percpu.h"

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/percpu.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
index 77f30b664b4..30cf46534dd 100644
--- a/arch/ia64/include/asm/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
@@ -27,12 +27,12 @@ extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
-
 #define per_cpu_init()				(__phys_per_cpu_start)
 
 #endif	/* SMP */
 
+#define PER_CPU_BASE_SECTION ".data.percpu"
+
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
  * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
-- 
cgit v1.2.3


From 2add8e235cbe0dcd672c33fc322754e15500238c Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Sun, 8 Feb 2009 09:58:39 -0500
Subject: x86: use linker to offset symbols by __per_cpu_load

Impact: cleanup and bug fix

Use the linker to create symbols for certain per-cpu variables
that are offset by __per_cpu_load.  This allows the removal of
the runtime fixup of the GDT pointer, which fixes a bug with
resume reported by Jiri Slaby.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h    | 22 ++++++++++++++++++++++
 arch/x86/include/asm/processor.h |  2 ++
 arch/x86/kernel/cpu/common.c     |  6 +-----
 arch/x86/kernel/head_64.S        | 21 ++-------------------
 arch/x86/kernel/vmlinux_64.lds.S |  8 ++++++++
 5 files changed, 35 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0b64af4f13a..aee103b26d0 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -34,6 +34,12 @@
 #define PER_CPU_VAR(var)	per_cpu__##var
 #endif	/* SMP */
 
+#ifdef CONFIG_X86_64_SMP
+#define INIT_PER_CPU_VAR(var)  init_per_cpu__##var
+#else
+#define INIT_PER_CPU_VAR(var)  per_cpu__##var
+#endif
+
 #else /* ...!ASSEMBLY */
 
 #include <linux/stringify.h>
@@ -45,6 +51,22 @@
 #define __percpu_arg(x)		"%" #x
 #endif
 
+/*
+ * Initialized pointers to per-cpu variables needed for the boot
+ * processor need to use these macros to get the proper address
+ * offset from __per_cpu_load on SMP.
+ *
+ * There also must be an entry in vmlinux_64.lds.S
+ */
+#define DECLARE_INIT_PER_CPU(var) \
+       extern typeof(per_cpu_var(var)) init_per_cpu_var(var)
+
+#ifdef CONFIG_X86_64_SMP
+#define init_per_cpu_var(var)  init_per_cpu__##var
+#else
+#define init_per_cpu_var(var)  per_cpu_var(var)
+#endif
+
 /* For arch-specific code, we can use direct single-insn ops (they
  * don't give an lvalue though). */
 extern void __bad_percpu_size(void);
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 656d02ea509..373d3f628d2 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -393,6 +393,8 @@ union irq_stack_union {
 };
 
 DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_INIT_PER_CPU(irq_stack_union);
+
 DECLARE_PER_CPU(char *, irq_stack_ptr);
 #endif
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 0f73ea42308..41b0de6df87 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -902,12 +902,8 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
 		     irq_stack_union) __aligned(PAGE_SIZE);
-#ifdef CONFIG_SMP
-DEFINE_PER_CPU(char *, irq_stack_ptr);	/* will be set during per cpu init */
-#else
 DEFINE_PER_CPU(char *, irq_stack_ptr) =
-	per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
-#endif
+	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
 
 DEFINE_PER_CPU(unsigned long, kernel_stack) =
 	(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index a0a2b5ca9b7..2e648e3a5ea 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -205,19 +205,6 @@ ENTRY(secondary_startup_64)
 	pushq $0
 	popfq
 
-#ifdef CONFIG_SMP
-	/*
-	 * Fix up static pointers that need __per_cpu_load added.  The assembler
-	 * is unable to do this directly.  This is only needed for the boot cpu.
-	 * These values are set up with the correct base addresses by C code for
-	 * secondary cpus.
-	 */
-	movq	initial_gs(%rip), %rax
-	cmpl	$0, per_cpu__cpu_number(%rax)
-	jne	1f
-	addq	%rax, early_gdt_descr_base(%rip)
-1:
-#endif
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
@@ -275,11 +262,7 @@ ENTRY(secondary_startup_64)
 	ENTRY(initial_code)
 	.quad	x86_64_start_kernel
 	ENTRY(initial_gs)
-#ifdef CONFIG_SMP
-	.quad	__per_cpu_load
-#else
-	.quad	PER_CPU_VAR(irq_stack_union)
-#endif
+	.quad	INIT_PER_CPU_VAR(irq_stack_union)
 	__FINITDATA
 
 	ENTRY(stack_start)
@@ -425,7 +408,7 @@ NEXT_PAGE(level2_spare_pgt)
 early_gdt_descr:
 	.word	GDT_ENTRIES*8-1
 early_gdt_descr_base:
-	.quad	per_cpu__gdt_page
+	.quad	INIT_PER_CPU_VAR(gdt_page)
 
 ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 07f62d287ff..087a7f2c639 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -257,6 +257,14 @@ SECTIONS
   DWARF_DEBUG
 }
 
+ /*
+  * Per-cpu symbols which need to be offset from __per_cpu_load
+  * for the boot processor.
+  */
+#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+INIT_PER_CPU(gdt_page);
+INIT_PER_CPU(irq_stack_union);
+
 /*
  * Build-time check on the image size:
  */
-- 
cgit v1.2.3


From 44581a28e805a31661469c4b466b9cd14b36e7b6 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Sun, 8 Feb 2009 09:58:40 -0500
Subject: x86: fix abuse of per_cpu_offset

Impact: bug fix

Don't use per_cpu_offset() to determine if it valid to access a
per-cpu variable for a given cpu number.  It is not a valid assumption
on x86-64 anymore. Use cpu_possible() instead.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/numa_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 08d140fbc31..deb1c1ab786 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -702,7 +702,7 @@ void __cpuinit numa_set_node(int cpu, int node)
 	}
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-	if (cpu >= nr_cpu_ids || !per_cpu_offset(cpu)) {
+	if (cpu >= nr_cpu_ids || !cpu_possible(cpu)) {
 		printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
 		dump_stack();
 		return;
@@ -790,7 +790,7 @@ int early_cpu_to_node(int cpu)
 	if (early_per_cpu_ptr(x86_cpu_to_node_map))
 		return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
 
-	if (!per_cpu_offset(cpu)) {
+	if (!cpu_possible(cpu)) {
 		printk(KERN_WARNING
 			"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
 		dump_stack();
-- 
cgit v1.2.3


From 726c0d95b6bd06cb83efd36a76ccf03fa9a770f0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 9 Feb 2009 11:32:17 +0100
Subject: x86: early_printk.c - fix pgtable.h unification fallout
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

 arch/x86/kernel/early_printk.c: In function ‘early_dbgp_init’:
 arch/x86/kernel/early_printk.c:827: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function)
 arch/x86/kernel/early_printk.c:827: error: (Each undeclared identifier is reported only once
 arch/x86/kernel/early_printk.c:827: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/early_printk.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 6a36dd228b6..639ad98238a 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -14,6 +14,7 @@
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
+#include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
 
 /* Simple VGA output */
-- 
cgit v1.2.3


From e5f7f202f31fd05e9de7e1ba5a7b30de7855f5aa Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 9 Feb 2009 11:42:57 +0100
Subject: x86, pgtable.h: macro-ify *_page() methods
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The p?d_page() methods still rely on highlevel types and methods:

In file included from arch/x86/kernel/early_printk.c:18:
/home/mingo/tip/arch/x86/include/asm/pgtable.h: In function ‘pmd_page’:
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function ‘__pfn_to_section’
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: initialization makes pointer from integer without a cast
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: implicit declaration of function ‘__section_mem_map_addr’
/home/mingo/tip/arch/x86/include/asm/pgtable.h:516: error: return makes pointer from integer without a cast

So convert them to macros and document the type dependency.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index a80a956ae65..76696e98f5b 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -473,10 +473,11 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
 }
 
-static inline struct page *pmd_page(pmd_t pmd)
-{
-	return pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT);
-}
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pmd_page(pmd)	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
 
 /*
  * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
@@ -543,10 +544,11 @@ static inline unsigned long pud_page_vaddr(pud_t pud)
 	return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
 }
 
-static inline struct page *pud_page(pud_t pud)
-{
-	return pfn_to_page(pud_val(pud) >> PAGE_SHIFT);
-}
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pud_page(pud)		pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
 
 /* Find an entry in the second-level page table.. */
 static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
@@ -582,10 +584,11 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
 	return (unsigned long)__va((unsigned long)pgd_val(pgd) & PTE_PFN_MASK);
 }
 
-static inline struct page *pgd_page(pgd_t pgd)
-{
-	return pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT);
-}
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pgd_page(pgd)		pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT)
 
 /* to find an entry in a page-table-directory. */
 static inline unsigned pud_index(unsigned long address)
-- 
cgit v1.2.3


From c47c1b1f3a9d6973108020df1dcab7604f7774dd Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 9 Feb 2009 11:57:45 +0100
Subject: x86, pgtable.h: fix 2-level 32-bit build

- pmd_flags() needs to be available on 2-levels too
- provide pud_large() wrapper as well
- include page.h - it provides basic types relied on by pgtable.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/page.h    | 9 +++++----
 arch/x86/include/asm/pgtable.h | 9 +++++++++
 2 files changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 0b16b64a8fe..823cc931363 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -139,10 +139,6 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 	return pmd.pmd;
 }
 
-static inline pmdval_t pmd_flags(pmd_t pmd)
-{
-	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
-}
 #else  /* PAGETABLE_LEVELS == 2 */
 #include <asm-generic/pgtable-nopmd.h>
 
@@ -152,6 +148,11 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 #endif	/* PAGETABLE_LEVELS >= 3 */
 
+static inline pmdval_t pmd_flags(pmd_t pmd)
+{
+	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+}
+
 static inline pte_t native_make_pte(pteval_t val)
 {
 	return (pte_t) { .pte = val };
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 76696e98f5b..178205305ac 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_PGTABLE_H
 #define _ASM_X86_PGTABLE_H
 
+#include <asm/page.h>
+
 #define FIRST_USER_ADDRESS	0
 
 #define _PAGE_BIT_PRESENT	0	/* is present */
@@ -528,6 +530,13 @@ static inline unsigned long pages_to_mb(unsigned long npg)
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
 	remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#if PAGETABLE_LEVELS == 2
+static inline int pud_large(pud_t pud)
+{
+	return 0;
+}
+#endif
+
 #if PAGETABLE_LEVELS > 2
 static inline int pud_none(pud_t pud)
 {
-- 
cgit v1.2.3


From 9b2b76a3344146c4d8d300874e73af8161204f87 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 14:09:40 -0800
Subject: x86: add handle_irq() to allow interrupt injection

Xen uses a different interrupt path, so introduce handle_irq() to
allow interrupts to be inserted into the normal interrupt path.  This
is handled slightly differently on 32 and 64-bit.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq.h |  1 +
 arch/x86/kernel/irq_32.c   | 34 +++++++++++++++++++++-------------
 arch/x86/kernel/irq_64.c   | 23 ++++++++++++++++-------
 3 files changed, 38 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 592688ed04d..d0f6f7d1771 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -39,6 +39,7 @@ extern void fixup_irqs(void);
 extern unsigned int do_IRQ(struct pt_regs *regs);
 extern void init_IRQ(void);
 extern void native_init_IRQ(void);
+extern bool handle_irq(unsigned irq, struct pt_regs *regs);
 
 /* Interrupt vector management */
 extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index d802c844991..61f09fb969e 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -191,6 +191,26 @@ static inline int
 execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
 #endif
 
+bool handle_irq(unsigned irq, struct pt_regs *regs)
+{
+	struct irq_desc *desc;
+	int overflow;
+
+	overflow = check_stack_overflow();
+
+	desc = irq_to_desc(irq);
+	if (unlikely(!desc))
+		return false;
+
+	if (!execute_on_irq_stack(overflow, desc, irq)) {
+		if (unlikely(overflow))
+			print_stack_overflow();
+		desc->handle_irq(irq, desc);
+	}
+
+	return true;
+}
+
 /*
  * do_IRQ handles all normal device IRQ's (the special
  * SMP cross-CPU interrupts have their own specific
@@ -200,31 +220,19 @@ unsigned int do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
 	/* high bit used in ret_from_ code */
-	int overflow;
 	unsigned vector = ~regs->orig_ax;
-	struct irq_desc *desc;
 	unsigned irq;
 
-
 	old_regs = set_irq_regs(regs);
 	irq_enter();
 	irq = __get_cpu_var(vector_irq)[vector];
 
-	overflow = check_stack_overflow();
-
-	desc = irq_to_desc(irq);
-	if (unlikely(!desc)) {
+	if (!handle_irq(irq, regs)) {
 		printk(KERN_EMERG "%s: cannot handle IRQ %d vector %#x cpu %d\n",
 					__func__, irq, vector, smp_processor_id());
 		BUG();
 	}
 
-	if (!execute_on_irq_stack(overflow, desc, irq)) {
-		if (unlikely(overflow))
-			print_stack_overflow();
-		desc->handle_irq(irq, desc);
-	}
-
 	irq_exit();
 	set_irq_regs(old_regs);
 	return 1;
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 018963aa6ee..a93f3b0dc7f 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -48,6 +48,20 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 #endif
 }
 
+bool handle_irq(unsigned irq, struct pt_regs *regs)
+{
+	struct irq_desc *desc;
+
+	stack_overflow_check(regs);
+
+	desc = irq_to_desc(irq);
+	if (unlikely(!desc))
+		return false;
+
+	generic_handle_irq_desc(irq, desc);
+	return true;
+}
+
 /*
  * do_IRQ handles all normal device IRQ's (the special
  * SMP cross-CPU interrupts have their own specific
@@ -56,7 +70,6 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 asmlinkage unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct irq_desc *desc;
 
 	/* high bit used in ret_from_ code  */
 	unsigned vector = ~regs->orig_ax;
@@ -64,14 +77,10 @@ asmlinkage unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 
 	exit_idle();
 	irq_enter();
-	irq = __get_cpu_var(vector_irq)[vector];
 
-	stack_overflow_check(regs);
+	irq = __get_cpu_var(vector_irq)[vector];
 
-	desc = irq_to_desc(irq);
-	if (likely(desc))
-		generic_handle_irq_desc(irq, desc);
-	else {
+	if (!handle_irq(irq, regs)) {
 		if (!disable_apic)
 			ack_APIC_irq();
 
-- 
cgit v1.2.3


From 7c1d7cdcef1b54f4a78892b6b99d19f12c4f398e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 14:09:41 -0800
Subject: x86: unify do_IRQ()

With the differences in interrupt handling hoisted into handle_irq(),
do_IRQ is more or less identical between 32 and 64 bit, so unify it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq.h |  3 ++-
 arch/x86/kernel/irq.c      | 38 ++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/irq_32.c   | 27 ---------------------------
 arch/x86/kernel/irq_64.c   | 33 ---------------------------------
 4 files changed, 40 insertions(+), 61 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index d0f6f7d1771..107eb219669 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -36,11 +36,12 @@ static inline int irq_canonicalize(int irq)
 extern void fixup_irqs(void);
 #endif
 
-extern unsigned int do_IRQ(struct pt_regs *regs);
 extern void init_IRQ(void);
 extern void native_init_IRQ(void);
 extern bool handle_irq(unsigned irq, struct pt_regs *regs);
 
+extern unsigned int do_IRQ(struct pt_regs *regs);
+
 /* Interrupt vector management */
 extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
 extern int vector_used_by_percpu_irq(unsigned int vector);
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 8b30d0c2512..f13ca1650aa 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -6,10 +6,12 @@
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
 #include <linux/smp.h>
+#include <linux/ftrace.h>
 
 #include <asm/apic.h>
 #include <asm/io_apic.h>
 #include <asm/irq.h>
+#include <asm/idle.h>
 
 atomic_t irq_err_count;
 
@@ -188,4 +190,40 @@ u64 arch_irq_stat(void)
 	return sum;
 }
 
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	/* high bit used in ret_from_ code  */
+	unsigned vector = ~regs->orig_ax;
+	unsigned irq;
+
+	exit_idle();
+	irq_enter();
+
+	irq = __get_cpu_var(vector_irq)[vector];
+
+	if (!handle_irq(irq, regs)) {
+#ifdef CONFIG_X86_64
+		if (!disable_apic)
+			ack_APIC_irq();
+#endif
+
+		if (printk_ratelimit())
+			printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n",
+			       __func__, smp_processor_id(), vector, irq);
+	}
+
+	irq_exit();
+
+	set_irq_regs(old_regs);
+	return 1;
+}
+
 EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 61f09fb969e..4beb9a13873 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -211,33 +211,6 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 	return true;
 }
 
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-unsigned int do_IRQ(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	/* high bit used in ret_from_ code */
-	unsigned vector = ~regs->orig_ax;
-	unsigned irq;
-
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-	irq = __get_cpu_var(vector_irq)[vector];
-
-	if (!handle_irq(irq, regs)) {
-		printk(KERN_EMERG "%s: cannot handle IRQ %d vector %#x cpu %d\n",
-					__func__, irq, vector, smp_processor_id());
-		BUG();
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
-	return 1;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 #include <asm/genapic.h>
 
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index a93f3b0dc7f..977d8b43a0d 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -62,39 +62,6 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 	return true;
 }
 
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-asmlinkage unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	/* high bit used in ret_from_ code  */
-	unsigned vector = ~regs->orig_ax;
-	unsigned irq;
-
-	exit_idle();
-	irq_enter();
-
-	irq = __get_cpu_var(vector_irq)[vector];
-
-	if (!handle_irq(irq, regs)) {
-		if (!disable_apic)
-			ack_APIC_irq();
-
-		if (printk_ratelimit())
-			printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n",
-				__func__, smp_processor_id(), vector);
-	}
-
-	irq_exit();
-
-	set_irq_regs(old_regs);
-	return 1;
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 /* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
 void fixup_irqs(void)
-- 
cgit v1.2.3


From 792dc4f6cdacf50d3f2b93756d282fc04ee34bd5 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 14:09:43 -0800
Subject: xen: use our own eventchannel->irq path

Rather than overloading vectors for event channels, take full
responsibility for mapping an event channel to irq directly.  With
this patch Xen has its own irq allocator.

When the kernel gets an event channel upcall, it maps the event
channel number to an irq and injects it into the normal interrupt
path.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/xen/events.h |  6 ------
 arch/x86/xen/irq.c                | 17 +----------------
 2 files changed, 1 insertion(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h
index 19144184983..1df35417c41 100644
--- a/arch/x86/include/asm/xen/events.h
+++ b/arch/x86/include/asm/xen/events.h
@@ -15,10 +15,4 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 	return raw_irqs_disabled_flags(regs->flags);
 }
 
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
-{
-	regs->orig_ax = ~irq;
-	do_IRQ(regs);
-}
-
 #endif /* _ASM_X86_XEN_EVENTS_H */
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 5a070900ad3..cfd17799bd6 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -19,21 +19,6 @@ void xen_force_evtchn_callback(void)
 	(void)HYPERVISOR_xen_version(0, NULL);
 }
 
-static void __init __xen_init_IRQ(void)
-{
-	int i;
-
-	/* Create identity vector->irq map */
-	for(i = 0; i < NR_VECTORS; i++) {
-		int cpu;
-
-		for_each_possible_cpu(cpu)
-			per_cpu(vector_irq, cpu)[i] = i;
-	}
-
-	xen_init_IRQ();
-}
-
 static unsigned long xen_save_fl(void)
 {
 	struct vcpu_info *vcpu;
@@ -127,7 +112,7 @@ static void xen_halt(void)
 }
 
 static const struct pv_irq_ops xen_irq_ops __initdata = {
-	.init_IRQ = __xen_init_IRQ,
+	.init_IRQ = xen_init_IRQ,
 
 	.save_fl = PV_CALLEE_SAVE(xen_save_fl),
 	.restore_fl = PV_CALLEE_SAVE(xen_restore_fl),
-- 
cgit v1.2.3


From 1c14fa4937eb73509e07ac12bf8db1fdf4c42a59 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sat, 7 Feb 2009 15:39:38 -0800
Subject: x86: use early_ioremap in __acpi_map_table

__acpi_map_table() effectively reimplements early_ioremap().  Rather
than have that duplication, just implement it in terms of
early_ioremap().

However, unlike early_ioremap(), __acpi_map_table() just maintains a
single mapping which gets replaced each call, and has no corresponding
unmap function.  Implement this by just removing the previous mapping
each time its called.  Unfortunately, this will leave a stray mapping
at the end.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/acpi.h      |  3 ---
 arch/x86/include/asm/fixmap_32.h |  4 ----
 arch/x86/include/asm/fixmap_64.h |  4 ----
 arch/x86/kernel/acpi/boot.c      | 27 +++++++--------------------
 4 files changed, 7 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 9830681446a..4518dc50090 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -102,9 +102,6 @@ static inline void disable_acpi(void)
 	acpi_noirq = 1;
 }
 
-/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
-#define FIX_ACPI_PAGES 4
-
 extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 
 static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h
index c7115c1d721..047d9bab2b3 100644
--- a/arch/x86/include/asm/fixmap_32.h
+++ b/arch/x86/include/asm/fixmap_32.h
@@ -95,10 +95,6 @@ enum fixed_addresses {
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
 	FIX_WP_TEST,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 00a30ab9b1a..298d9ba3fae 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -50,10 +50,6 @@ enum fixed_addresses {
 	FIX_PARAVIRT_BOOTMAP,
 #endif
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index d37593c2f43..c518599e426 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -121,8 +121,8 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
  */
 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
-	unsigned long base, offset, mapped_size;
-	int idx;
+	static char *prev_map;
+	static unsigned long prev_size;
 
 	if (!phys || !size)
 		return NULL;
@@ -130,26 +130,13 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 	if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
 		return __va(phys);
 
-	offset = phys & (PAGE_SIZE - 1);
-	mapped_size = PAGE_SIZE - offset;
-	clear_fixmap(FIX_ACPI_END);
-	set_fixmap(FIX_ACPI_END, phys);
-	base = fix_to_virt(FIX_ACPI_END);
+	if (prev_map)
+		early_iounmap(prev_map, prev_size);
 
-	/*
-	 * Most cases can be covered by the below.
-	 */
-	idx = FIX_ACPI_END;
-	while (mapped_size < size) {
-		if (--idx < FIX_ACPI_BEGIN)
-			return NULL;	/* cannot handle this */
-		phys += PAGE_SIZE;
-		clear_fixmap(idx);
-		set_fixmap(idx, phys);
-		mapped_size += PAGE_SIZE;
-	}
+	prev_size = size;
+	prev_map = early_ioremap(phys, size);
 
-	return ((unsigned char *)base + offset);
+	return prev_map;
 }
 
 #ifdef CONFIG_PCI_MMCONFIG
-- 
cgit v1.2.3


From eecb9a697f0b790e5840dae8a8b866bea49a86ee Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sat, 7 Feb 2009 15:39:38 -0800
Subject: x86: always explicitly map acpi memory

Always map acpi tables, rather than assuming we can use the normal
linear mapping to access the acpi tables.  This is necessary in a
virtual environment where the linear mappings are to pseudo-physical
memory, but the acpi tables exist at a real physical address.  It
doesn't hurt to map in the normal non-virtual case, so just do it
unconditionally.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/acpi/boot.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c518599e426..5424a18f2e4 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -127,9 +127,6 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 	if (!phys || !size)
 		return NULL;
 
-	if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
-		return __va(phys);
-
 	if (prev_map)
 		early_iounmap(prev_map, prev_size);
 
-- 
cgit v1.2.3


From 05876f88ed9a66b26af613e222795ae790616252 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sat, 7 Feb 2009 15:39:40 -0800
Subject: acpi: remove final __acpi_map_table mapping before setting
 acpi_gbl_permanent_mmap

On x86, __acpi_map_table uses early_ioremap() to create the mapping,
replacing the previous mapping with a new one.  Once enough of the
kernel is up an running it switches to using normal ioremap().  At
that point, we need to clean up the final mapping to avoid a warning
from the early_ioremap subsystem.

This can be removed after all the instances in the ACPI code are fixed
that rely on early-ioremap's implicit overmapping of previously
mapped tables.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/acpi/boot.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 5424a18f2e4..7217834f6b1 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -124,12 +124,14 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 	static char *prev_map;
 	static unsigned long prev_size;
 
+	if (prev_map) {
+		early_iounmap(prev_map, prev_size);
+		prev_map = NULL;
+	}
+
 	if (!phys || !size)
 		return NULL;
 
-	if (prev_map)
-		early_iounmap(prev_map, prev_size);
-
 	prev_size = size;
 	prev_map = early_ioremap(phys, size);
 
-- 
cgit v1.2.3


From 7d97277b754d3ee098a5ec69b6aaafb00c94e2f2 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Sat, 7 Feb 2009 15:39:41 -0800
Subject: acpi/x86: introduce __apci_map_table, v4

to prevent wrongly overwriting fixmap that still want to use.

ACPI used to rely on low mappings being all linearly mapped and
grew a habit: it never really unmapped certain kinds of tables
after use.

This can cause problems - for example the hypothetical case
when some spurious access still references it.

v2: remove prev_map and prev_size in __apci_map_table
v3: let acpi_os_unmap_memory() call early_iounmap too, so remove extral calling to
early_acpi_os_unmap_memory
v4: fix typo in one acpi_get_table_with_size calling

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/kernel/acpi.c     |  4 ++++
 arch/x86/kernel/acpi/boot.c | 17 +++++++----------
 2 files changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index d541671caf4..2363ed17319 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -199,6 +199,10 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 	return __va(phys_addr);
 }
 
+char *__init __acpi_unmap_table(unsigned long virt_addr, unsigned long size)
+{
+}
+
 /* --------------------------------------------------------------------------
                             Boot-time Table Parsing
    -------------------------------------------------------------------------- */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 7217834f6b1..4c2aaea4293 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -121,21 +121,18 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
  */
 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
-	static char *prev_map;
-	static unsigned long prev_size;
-
-	if (prev_map) {
-		early_iounmap(prev_map, prev_size);
-		prev_map = NULL;
-	}
 
 	if (!phys || !size)
 		return NULL;
 
-	prev_size = size;
-	prev_map = early_ioremap(phys, size);
+	return early_ioremap(phys, size);
+}
+void __init __acpi_unmap_table(char *map, unsigned long size)
+{
+	if (!map || !size)
+		return;
 
-	return prev_map;
+	early_iounmap(map, size);
 }
 
 #ifdef CONFIG_PCI_MMCONFIG
-- 
cgit v1.2.3


From b825e6cc7b1401862531df497a4a4daff8102ed5 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Sat, 7 Feb 2009 15:39:41 -0800
Subject: x86, es7000: fix ACPI table mappings

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 53699c931ad..71d7be624d4 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -292,24 +292,31 @@ int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
 	int i = 0;
+	acpi_size tbl_size;
 
-	while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+	while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) {
 		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
 			struct oem_table *t = (struct oem_table *)header;
 
 			oem_addrX = t->OEMTableAddr;
 			oem_size = t->OEMTableSize;
+			early_acpi_os_unmap_memory(header, tbl_size);
 
 			*oem_addr = (unsigned long)__acpi_map_table(oem_addrX,
 								    oem_size);
 			return 0;
 		}
+		early_acpi_os_unmap_memory(header, tbl_size);
 	}
 	return -1;
 }
 
 void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 {
+	if (!oem_addr)
+		return;
+
+	__acpi_unmap_table((char *)oem_addr, oem_size);
 }
 #endif
 
-- 
cgit v1.2.3


From 3c552ac8a747d6c26d13302c54d71dae9f56f4ac Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 9 Feb 2009 12:05:47 -0800
Subject: x86: make apic_* operations inline functions

Mainly to get proper type-checking and consistency.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/apic.h | 35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index b03711d7990..f4835a1be36 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -139,12 +139,35 @@ struct apic_ops {
 
 extern struct apic_ops *apic_ops;
 
-#define apic_read (apic_ops->read)
-#define apic_write (apic_ops->write)
-#define apic_icr_read (apic_ops->icr_read)
-#define apic_icr_write (apic_ops->icr_write)
-#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
-#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+static inline u32 apic_read(u32 reg)
+{
+	return apic_ops->read(reg);
+}
+
+static inline void apic_write(u32 reg, u32 val)
+{
+	apic_ops->write(reg, val);
+}
+
+static inline u64 apic_icr_read(void)
+{
+	return apic_ops->icr_read();
+}
+
+static inline void apic_icr_write(u32 low, u32 high)
+{
+	apic_ops->icr_write(low, high);
+}
+
+static inline void apic_wait_icr_idle(void)
+{
+	apic_ops->wait_icr_idle();
+}
+
+static inline u32 safe_apic_wait_icr_idle(void)
+{
+	return apic_ops->safe_wait_icr_idle();
+}
 
 extern int get_physical_broadcast(void);
 
-- 
cgit v1.2.3


From 4924e228ae039029a9503ad571d91086e4042c90 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 9 Feb 2009 12:05:47 -0800
Subject: x86: unstatic mp_find_ioapic so it can be used elsewhere

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/mpspec.h | 1 +
 arch/x86/kernel/acpi/boot.c   | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 8c5620147c4..b59371a312f 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -77,6 +77,7 @@ extern int acpi_probe_gsi(void);
 #ifdef CONFIG_X86_IO_APIC
 extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 				u32 gsi, int triggering, int polarity);
+extern int mp_find_ioapic(int gsi);
 #else
 static inline int
 mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c334fe75dcd..068b900f4b0 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -872,7 +872,7 @@ static struct {
 	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
 } mp_ioapic_routing[MAX_IO_APICS];
 
-static int mp_find_ioapic(int gsi)
+int mp_find_ioapic(int gsi)
 {
 	int i = 0;
 
-- 
cgit v1.2.3


From c3e137d1e882c4fab9adcce7ae2be9bf3eb64c4c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 9 Feb 2009 12:05:47 -0800
Subject: x86: add mp_find_ioapic_pin

Add mp_find_ioapic_pin() to find an IO APIC's specific pin from a GSI,
and use this function within acpi/boot.  Make it non-static so other
code can use it too.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/mpspec.h |  1 +
 arch/x86/kernel/acpi/boot.c   | 16 +++++++++++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index b59371a312f..5916c8df09d 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -78,6 +78,7 @@ extern int acpi_probe_gsi(void);
 extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 				u32 gsi, int triggering, int polarity);
 extern int mp_find_ioapic(int gsi);
+extern int mp_find_ioapic_pin(int ioapic, int gsi);
 #else
 static inline int
 mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 068b900f4b0..bba162c81d5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -887,6 +887,16 @@ int mp_find_ioapic(int gsi)
 	return -1;
 }
 
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+	if (WARN_ON(ioapic == -1))
+		return -1;
+	if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
+		return -1;
+
+	return gsi - mp_ioapic_routing[ioapic].gsi_base;
+}
+
 static u8 __init uniq_ioapic_id(u8 id)
 {
 #ifdef CONFIG_X86_32
@@ -1022,7 +1032,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	ioapic = mp_find_ioapic(gsi);
 	if (ioapic < 0)
 		return;
-	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+	pin = mp_find_ioapic_pin(ioapic, gsi);
 
 	/*
 	 * TBD: This check is for faulty timer entries, where the override
@@ -1142,7 +1152,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		return gsi;
 	}
 
-	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+	ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
 
 #ifdef CONFIG_X86_32
 	if (ioapic_renumber_irq)
@@ -1231,7 +1241,7 @@ int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
 	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
 	ioapic = mp_find_ioapic(gsi);
 	mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
-	mp_irq.dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
+	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
 
 	save_mp_irq(&mp_irq);
 #endif
-- 
cgit v1.2.3


From ca97ab90164c7b978abf9d82dc82d6dc2cbac4a0 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 9 Feb 2009 12:05:47 -0800
Subject: x86: unstatic ioapic entry funcs

Unstatic ioapic_write_entry and setup_ioapic_entry functions so that
the Xen code can do its own ioapic routing setup.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/io_apic.h |  6 ++++++
 arch/x86/kernel/io_apic.c      | 10 +++++-----
 2 files changed, 11 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 309d0e23193..59cb4a1317b 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -169,6 +169,12 @@ extern void reinit_intr_remapped_IO_APIC(int);
 
 extern void probe_nr_irqs_gsi(void);
 
+extern int setup_ioapic_entry(int apic, int irq,
+			      struct IO_APIC_route_entry *entry,
+			      unsigned int destination, int trigger,
+			      int polarity, int vector);
+extern void ioapic_write_entry(int apic, int pin,
+			       struct IO_APIC_route_entry e);
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 56e51eb551a..7248ca11bdc 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -486,7 +486,7 @@ __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
 }
 
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&ioapic_lock, flags);
@@ -1478,10 +1478,10 @@ static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long t
 					      handle_edge_irq, "edge");
 }
 
-static int setup_ioapic_entry(int apic_id, int irq,
-			      struct IO_APIC_route_entry *entry,
-			      unsigned int destination, int trigger,
-			      int polarity, int vector)
+int setup_ioapic_entry(int apic_id, int irq,
+		       struct IO_APIC_route_entry *entry,
+		       unsigned int destination, int trigger,
+		       int polarity, int vector)
 {
 	/*
 	 * add it to the IO-APIC irq-routing table:
-- 
cgit v1.2.3


From bf56957d176c279175464f385f3eb03d65819328 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Mon, 9 Feb 2009 12:05:48 -0800
Subject: xen: expose enable_IO_APIC for 32-bit

enable_IO_APIC() is defined for both 32- and 64-bit x86, so it should
be declared for both.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/hw_irq.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 1b82781b898..370e1c83bb4 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -65,9 +65,7 @@ extern void disable_IO_APIC(void);
 extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
 extern void setup_ioapic_dest(void);
 
-#ifdef CONFIG_X86_64
 extern void enable_IO_APIC(void);
-#endif
 
 /* Statistics */
 extern atomic_t irq_err_count;
-- 
cgit v1.2.3


From 76397f72fb9f4c9a96dfe05462887811c81b0e17 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:39 +0900
Subject: x86: stackprotector.h misc update

Impact: misc udpate

* wrap content with CONFIG_CC_STACK_PROTECTOR so that other arch files
  can include it directly

* add missing includes

This will help future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/stackprotector.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 36a700acaf2..ee275e9f48a 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -1,8 +1,12 @@
 #ifndef _ASM_STACKPROTECTOR_H
 #define _ASM_STACKPROTECTOR_H 1
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+
 #include <asm/tsc.h>
 #include <asm/processor.h>
+#include <asm/percpu.h>
+#include <linux/random.h>
 
 /*
  * Initialize the stackprotector canary value.
@@ -35,4 +39,5 @@ static __always_inline void boot_init_stack_canary(void)
 	percpu_write(irq_stack_union.stack_canary, canary);
 }
 
-#endif
+#endif	/* CC_STACKPROTECTOR */
+#endif	/* _ASM_STACKPROTECTOR_H */
-- 
cgit v1.2.3


From 5d707e9c8ef2a3596ed5c975c6ff05cec890c2b4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:39 +0900
Subject: stackprotector: update make rules

Impact: no default -fno-stack-protector if stackp is enabled, cleanup

Stackprotector make rules had the following problems.

* cc support test and warning are scattered across makefile and
  kernel/panic.c.

* -fno-stack-protector was always added regardless of configuration.

Update such that cc support test and warning are contained in makefile
and -fno-stack-protector is added iff stackp is turned off.  While at
it, prepare for 32bit support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Makefile | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index cacee981d16..ab48ab497e5 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -70,14 +70,17 @@ else
         # this works around some issues with generating unwind tables in older gccs
         # newer gccs do it by default
         KBUILD_CFLAGS += -maccumulate-outgoing-args
+endif
 
-        stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
-        stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
-                "$(CC)" "-fstack-protector -DGCC_HAS_SP" )
-        stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
-                "$(CC)" -fstack-protector-all )
-
-        KBUILD_CFLAGS += $(stackp-y)
+ifdef CONFIG_CC_STACKPROTECTOR
+	cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
+        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+                stackp-y := -fstack-protector
+                stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
+                KBUILD_CFLAGS += $(stackp-y)
+        else
+                $(warning stack protector enabled but no compiler support)
+        endif
 endif
 
 # Stackpointer is addressed different for 32 bit and 64 bit x86
-- 
cgit v1.2.3


From d627ded5ab2f7818154d57369e3a8cdb40db2569 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:40 +0900
Subject: x86: no stack protector for vdso

Impact: avoid crash on vsyscall

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/vdso/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 4d6ef0a336d..16a9020c8f1 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -38,7 +38,7 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
 	$(call if_changed,objcopy)
 
 CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
-       $(filter -g%,$(KBUILD_CFLAGS))
+       $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector)
 
 $(vobjs): KBUILD_CFLAGS += $(CFL)
 
-- 
cgit v1.2.3


From f0d96110f9fd98a1a22e03b8adba69508843d910 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:40 +0900
Subject: x86: use asm .macro instead of cpp #define in entry_32.S

Impact: cleanup

Use .macro instead of cpp #define where approriate.  This cleans up
code and will ease future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_32.S | 293 +++++++++++++++++++++++----------------------
 1 file changed, 151 insertions(+), 142 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index a0b91aac72a..c461925d3b6 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -101,121 +101,127 @@
 #define resume_userspace_sig	resume_userspace
 #endif
 
-#define SAVE_ALL \
-	cld; \
-	pushl %fs; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	/*CFI_REL_OFFSET fs, 0;*/\
-	pushl %es; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	/*CFI_REL_OFFSET es, 0;*/\
-	pushl %ds; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	/*CFI_REL_OFFSET ds, 0;*/\
-	pushl %eax; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET eax, 0;\
-	pushl %ebp; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET ebp, 0;\
-	pushl %edi; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET edi, 0;\
-	pushl %esi; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET esi, 0;\
-	pushl %edx; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET edx, 0;\
-	pushl %ecx; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET ecx, 0;\
-	pushl %ebx; \
-	CFI_ADJUST_CFA_OFFSET 4;\
-	CFI_REL_OFFSET ebx, 0;\
-	movl $(__USER_DS), %edx; \
-	movl %edx, %ds; \
-	movl %edx, %es; \
-	movl $(__KERNEL_PERCPU), %edx; \
+.macro SAVE_ALL
+	cld
+	pushl %fs
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET fs, 0;*/
+	pushl %es
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET es, 0;*/
+	pushl %ds
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ds, 0;*/
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eax, 0
+	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebp, 0
+	pushl %edi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edi, 0
+	pushl %esi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esi, 0
+	pushl %edx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edx, 0
+	pushl %ecx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ecx, 0
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebx, 0
+	movl $(__USER_DS), %edx
+	movl %edx, %ds
+	movl %edx, %es
+	movl $(__KERNEL_PERCPU), %edx
 	movl %edx, %fs
+.endm
 
-#define RESTORE_INT_REGS \
-	popl %ebx;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	CFI_RESTORE ebx;\
-	popl %ecx;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	CFI_RESTORE ecx;\
-	popl %edx;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	CFI_RESTORE edx;\
-	popl %esi;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	CFI_RESTORE esi;\
-	popl %edi;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	CFI_RESTORE edi;\
-	popl %ebp;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	CFI_RESTORE ebp;\
-	popl %eax;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
+.macro RESTORE_INT_REGS
+	popl %ebx
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE ebx
+	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE ecx
+	popl %edx
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE edx
+	popl %esi
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE esi
+	popl %edi
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE edi
+	popl %ebp
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE ebp
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
 	CFI_RESTORE eax
+.endm
 
-#define RESTORE_REGS	\
-	RESTORE_INT_REGS; \
-1:	popl %ds;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	/*CFI_RESTORE ds;*/\
-2:	popl %es;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	/*CFI_RESTORE es;*/\
-3:	popl %fs;	\
-	CFI_ADJUST_CFA_OFFSET -4;\
-	/*CFI_RESTORE fs;*/\
-.pushsection .fixup,"ax";	\
-4:	movl $0,(%esp);	\
-	jmp 1b;		\
-5:	movl $0,(%esp);	\
-	jmp 2b;		\
-6:	movl $0,(%esp);	\
-	jmp 3b;		\
-.section __ex_table,"a";\
-	.align 4;	\
-	.long 1b,4b;	\
-	.long 2b,5b;	\
-	.long 3b,6b;	\
+.macro RESTORE_REGS
+	RESTORE_INT_REGS
+1:	popl %ds
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_RESTORE ds;*/
+2:	popl %es
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_RESTORE es;*/
+3:	popl %fs
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_RESTORE fs;*/
+.pushsection .fixup, "ax"
+4:	movl $0, (%esp)
+	jmp 1b
+5:	movl $0, (%esp)
+	jmp 2b
+6:	movl $0, (%esp)
+	jmp 3b
+.section __ex_table, "a"
+	.align 4
+	.long 1b, 4b
+	.long 2b, 5b
+	.long 3b, 6b
 .popsection
+.endm
 
-#define RING0_INT_FRAME \
-	CFI_STARTPROC simple;\
-	CFI_SIGNAL_FRAME;\
-	CFI_DEF_CFA esp, 3*4;\
-	/*CFI_OFFSET cs, -2*4;*/\
+.macro RING0_INT_FRAME
+	CFI_STARTPROC simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA esp, 3*4
+	/*CFI_OFFSET cs, -2*4;*/
 	CFI_OFFSET eip, -3*4
+.endm
 
-#define RING0_EC_FRAME \
-	CFI_STARTPROC simple;\
-	CFI_SIGNAL_FRAME;\
-	CFI_DEF_CFA esp, 4*4;\
-	/*CFI_OFFSET cs, -2*4;*/\
+.macro RING0_EC_FRAME
+	CFI_STARTPROC simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA esp, 4*4
+	/*CFI_OFFSET cs, -2*4;*/
 	CFI_OFFSET eip, -3*4
+.endm
 
-#define RING0_PTREGS_FRAME \
-	CFI_STARTPROC simple;\
-	CFI_SIGNAL_FRAME;\
-	CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
-	/*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
-	CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
-	/*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
-	/*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
-	CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
-	CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
-	CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
-	CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
-	CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
-	CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
+.macro RING0_PTREGS_FRAME
+	CFI_STARTPROC simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA esp, PT_OLDESP-PT_EBX
+	/*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/
+	CFI_OFFSET eip, PT_EIP-PT_OLDESP
+	/*CFI_OFFSET es, PT_ES-PT_OLDESP;*/
+	/*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/
+	CFI_OFFSET eax, PT_EAX-PT_OLDESP
+	CFI_OFFSET ebp, PT_EBP-PT_OLDESP
+	CFI_OFFSET edi, PT_EDI-PT_OLDESP
+	CFI_OFFSET esi, PT_ESI-PT_OLDESP
+	CFI_OFFSET edx, PT_EDX-PT_OLDESP
+	CFI_OFFSET ecx, PT_ECX-PT_OLDESP
 	CFI_OFFSET ebx, PT_EBX-PT_OLDESP
+.endm
 
 ENTRY(ret_from_fork)
 	CFI_STARTPROC
@@ -595,28 +601,30 @@ syscall_badsys:
 END(syscall_badsys)
 	CFI_ENDPROC
 
-#define FIXUP_ESPFIX_STACK \
-	/* since we are on a wrong stack, we cant make it a C code :( */ \
-	PER_CPU(gdt_page, %ebx); \
-	GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
-	addl %esp, %eax; \
-	pushl $__KERNEL_DS; \
-	CFI_ADJUST_CFA_OFFSET 4; \
-	pushl %eax; \
-	CFI_ADJUST_CFA_OFFSET 4; \
-	lss (%esp), %esp; \
-	CFI_ADJUST_CFA_OFFSET -8;
-#define UNWIND_ESPFIX_STACK \
-	movl %ss, %eax; \
-	/* see if on espfix stack */ \
-	cmpw $__ESPFIX_SS, %ax; \
-	jne 27f; \
-	movl $__KERNEL_DS, %eax; \
-	movl %eax, %ds; \
-	movl %eax, %es; \
-	/* switch to normal stack */ \
-	FIXUP_ESPFIX_STACK; \
-27:;
+.macro FIXUP_ESPFIX_STACK
+	/* since we are on a wrong stack, we cant make it a C code :( */
+	PER_CPU(gdt_page, %ebx)
+	GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
+	addl %esp, %eax
+	pushl $__KERNEL_DS
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	lss (%esp), %esp
+	CFI_ADJUST_CFA_OFFSET -8
+.endm
+.macro UNWIND_ESPFIX_STACK
+	movl %ss, %eax
+	/* see if on espfix stack */
+	cmpw $__ESPFIX_SS, %ax
+	jne 27f
+	movl $__KERNEL_DS, %eax
+	movl %eax, %ds
+	movl %eax, %es
+	/* switch to normal stack */
+	FIXUP_ESPFIX_STACK
+27:
+.endm
 
 /*
  * Build the entry stubs and pointer table with some assembler magic.
@@ -1136,26 +1144,27 @@ END(page_fault)
  * by hand onto the new stack - while updating the return eip past
  * the instruction that would have done it for sysenter.
  */
-#define FIX_STACK(offset, ok, label)		\
-	cmpw $__KERNEL_CS,4(%esp);		\
-	jne ok;					\
-label:						\
-	movl TSS_sysenter_sp0+offset(%esp),%esp;	\
-	CFI_DEF_CFA esp, 0;			\
-	CFI_UNDEFINED eip;			\
-	pushfl;					\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	pushl $__KERNEL_CS;			\
-	CFI_ADJUST_CFA_OFFSET 4;		\
-	pushl $sysenter_past_esp;		\
-	CFI_ADJUST_CFA_OFFSET 4;		\
+.macro FIX_STACK offset ok label
+	cmpw $__KERNEL_CS, 4(%esp)
+	jne \ok
+\label:
+	movl TSS_sysenter_sp0 + \offset(%esp), %esp
+	CFI_DEF_CFA esp, 0
+	CFI_UNDEFINED eip
+	pushfl
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $__KERNEL_CS
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $sysenter_past_esp
+	CFI_ADJUST_CFA_OFFSET 4
 	CFI_REL_OFFSET eip, 0
+.endm
 
 ENTRY(debug)
 	RING0_INT_FRAME
 	cmpl $ia32_sysenter_target,(%esp)
 	jne debug_stack_correct
-	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
 debug_stack_correct:
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
@@ -1213,7 +1222,7 @@ nmi_stack_correct:
 
 nmi_stack_fixup:
 	RING0_INT_FRAME
-	FIX_STACK(12,nmi_stack_correct, 1)
+	FIX_STACK 12, nmi_stack_correct, 1
 	jmp nmi_stack_correct
 
 nmi_debug_stack_check:
@@ -1224,7 +1233,7 @@ nmi_debug_stack_check:
 	jb nmi_stack_correct
 	cmpl $debug_esp_fix_insn,(%esp)
 	ja nmi_stack_correct
-	FIX_STACK(24,nmi_stack_correct, 1)
+	FIX_STACK 24, nmi_stack_correct, 1
 	jmp nmi_stack_correct
 
 nmi_espfix_stack:
-- 
cgit v1.2.3


From d9a89a26e02ef9ed03f74a755a8b4d8f3a066622 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:40 +0900
Subject: x86: add %gs accessors for x86_32

Impact: cleanup

On x86_32, %gs is handled lazily.  It's not saved and restored on
kernel entry/exit but only when necessary which usually is during task
switch but there are few other places.  Currently, it's done by
calling savesegment() and loadsegment() explicitly.  Define
get_user_gs(), set_user_gs() and task_user_gs() and use them instead.

While at it, clean up register access macros in signal.c.

This cleans up code a bit and will help future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/a.out-core.h  |  2 +-
 arch/x86/include/asm/elf.h         |  2 +-
 arch/x86/include/asm/mmu_context.h |  2 +-
 arch/x86/include/asm/system.h      |  9 +++++++++
 arch/x86/kernel/process_32.c       |  6 +++---
 arch/x86/kernel/ptrace.c           | 14 ++++++-------
 arch/x86/kernel/signal.c           | 41 +++++++++++++++-----------------------
 arch/x86/kernel/vm86_32.c          |  4 ++--
 arch/x86/math-emu/get_address.c    |  6 ++----
 9 files changed, 41 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/a.out-core.h b/arch/x86/include/asm/a.out-core.h
index 3c601f8224b..bb70e397aa8 100644
--- a/arch/x86/include/asm/a.out-core.h
+++ b/arch/x86/include/asm/a.out-core.h
@@ -55,7 +55,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 	dump->regs.ds = (u16)regs->ds;
 	dump->regs.es = (u16)regs->es;
 	dump->regs.fs = (u16)regs->fs;
-	savesegment(gs, dump->regs.gs);
+	dump->regs.gs = get_user_gs(regs);
 	dump->regs.orig_ax = regs->orig_ax;
 	dump->regs.ip = regs->ip;
 	dump->regs.cs = (u16)regs->cs;
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index f51a3ddde01..39b0aac1675 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -124,7 +124,7 @@ do {						\
 	pr_reg[7] = regs->ds & 0xffff;		\
 	pr_reg[8] = regs->es & 0xffff;		\
 	pr_reg[9] = regs->fs & 0xffff;		\
-	savesegment(gs, pr_reg[10]);		\
+	pr_reg[10] = get_user_gs(regs);		\
 	pr_reg[11] = regs->orig_ax;		\
 	pr_reg[12] = regs->ip;			\
 	pr_reg[13] = regs->cs & 0xffff;		\
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 52948df9cd1..4955165682c 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -79,7 +79,7 @@ do {						\
 #ifdef CONFIG_X86_32
 #define deactivate_mm(tsk, mm)			\
 do {						\
-	loadsegment(gs, 0);			\
+	set_user_gs(task_pt_regs(tsk), 0);	\
 } while (0)
 #else
 #define deactivate_mm(tsk, mm)			\
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 2fcc70bc85f..70c74b8db87 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -182,6 +182,15 @@ extern void native_load_gs_index(unsigned);
 #define savesegment(seg, value)				\
 	asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
 
+/*
+ * x86_32 user gs accessors.
+ */
+#ifdef CONFIG_X86_32
+#define get_user_gs(regs)	(u16)({unsigned long v; savesegment(gs, v); v;})
+#define set_user_gs(regs, v)	loadsegment(gs, (unsigned long)(v))
+#define task_user_gs(tsk)	((tsk)->thread.gs)
+#endif
+
 static inline unsigned long get_limit(unsigned long segment)
 {
 	unsigned long __limit;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 1a1ae8edc40..d58a340e1be 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -131,7 +131,7 @@ void __show_regs(struct pt_regs *regs, int all)
 	if (user_mode_vm(regs)) {
 		sp = regs->sp;
 		ss = regs->ss & 0xffff;
-		savesegment(gs, gs);
+		gs = get_user_gs(regs);
 	} else {
 		sp = (unsigned long) (&regs->sp);
 		savesegment(ss, ss);
@@ -304,7 +304,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 
 	p->thread.ip = (unsigned long) ret_from_fork;
 
-	savesegment(gs, p->thread.gs);
+	task_user_gs(p) = get_user_gs(regs);
 
 	tsk = current;
 	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
@@ -342,7 +342,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 void
 start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 {
-	__asm__("movl %0, %%gs" : : "r"(0));
+	set_user_gs(regs, 0);
 	regs->fs		= 0;
 	set_fs(USER_DS);
 	regs->ds		= __USER_DS;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 0a5df5f82fb..508b6b57d0c 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -90,9 +90,10 @@ static u16 get_segment_reg(struct task_struct *task, unsigned long offset)
 	if (offset != offsetof(struct user_regs_struct, gs))
 		retval = *pt_regs_access(task_pt_regs(task), offset);
 	else {
-		retval = task->thread.gs;
 		if (task == current)
-			savesegment(gs, retval);
+			retval = get_user_gs(task_pt_regs(task));
+		else
+			retval = task_user_gs(task);
 	}
 	return retval;
 }
@@ -126,13 +127,10 @@ static int set_segment_reg(struct task_struct *task,
 		break;
 
 	case offsetof(struct user_regs_struct, gs):
-		task->thread.gs = value;
 		if (task == current)
-			/*
-			 * The user-mode %gs is not affected by
-			 * kernel entry, so we must update the CPU.
-			 */
-			loadsegment(gs, value);
+			set_user_gs(task_pt_regs(task), value);
+		else
+			task_user_gs(task) = value;
 	}
 
 	return 0;
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 7fc78b01981..8562387c75a 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -50,27 +50,23 @@
 # define FIX_EFLAGS	__FIX_EFLAGS
 #endif
 
-#define COPY(x)			{		\
-	get_user_ex(regs->x, &sc->x);		\
-}
+#define COPY(x)			do {			\
+	get_user_ex(regs->x, &sc->x);			\
+} while (0)
 
-#define COPY_SEG(seg)		{			\
-		unsigned short tmp;			\
-		get_user_ex(tmp, &sc->seg);		\
-		regs->seg = tmp;			\
-}
+#define GET_SEG(seg)		({			\
+	unsigned short tmp;				\
+	get_user_ex(tmp, &sc->seg);			\
+	tmp;						\
+})
 
-#define COPY_SEG_CPL3(seg)	{			\
-		unsigned short tmp;			\
-		get_user_ex(tmp, &sc->seg);		\
-		regs->seg = tmp | 3;			\
-}
+#define COPY_SEG(seg)		do {			\
+	regs->seg = GET_SEG(seg);			\
+} while (0)
 
-#define GET_SEG(seg)		{			\
-		unsigned short tmp;			\
-		get_user_ex(tmp, &sc->seg);		\
-		loadsegment(seg, tmp);			\
-}
+#define COPY_SEG_CPL3(seg)	do {			\
+	regs->seg = GET_SEG(seg) | 3;			\
+} while (0)
 
 static int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
@@ -86,7 +82,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	get_user_try {
 
 #ifdef CONFIG_X86_32
-		GET_SEG(gs);
+		set_user_gs(regs, GET_SEG(gs));
 		COPY_SEG(fs);
 		COPY_SEG(es);
 		COPY_SEG(ds);
@@ -138,12 +134,7 @@ setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 	put_user_try {
 
 #ifdef CONFIG_X86_32
-		{
-			unsigned int tmp;
-
-			savesegment(gs, tmp);
-			put_user_ex(tmp, (unsigned int __user *)&sc->gs);
-		}
+		put_user_ex(get_user_gs(regs), (unsigned int __user *)&sc->gs);
 		put_user_ex(regs->fs, (unsigned int __user *)&sc->fs);
 		put_user_ex(regs->es, (unsigned int __user *)&sc->es);
 		put_user_ex(regs->ds, (unsigned int __user *)&sc->ds);
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 4eeb5cf9720..55ea30d2a3d 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -158,7 +158,7 @@ struct pt_regs *save_v86_state(struct kernel_vm86_regs *regs)
 	ret = KVM86->regs32;
 
 	ret->fs = current->thread.saved_fs;
-	loadsegment(gs, current->thread.saved_gs);
+	set_user_gs(ret, current->thread.saved_gs);
 
 	return ret;
 }
@@ -323,7 +323,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 	info->regs32->ax = 0;
 	tsk->thread.saved_sp0 = tsk->thread.sp0;
 	tsk->thread.saved_fs = info->regs32->fs;
-	savesegment(gs, tsk->thread.saved_gs);
+	tsk->thread.saved_gs = get_user_gs(info->regs32);
 
 	tss = &per_cpu(init_tss, get_cpu());
 	tsk->thread.sp0 = (unsigned long) &info->VM86_TSS_ESP0;
diff --git a/arch/x86/math-emu/get_address.c b/arch/x86/math-emu/get_address.c
index 420b3b6e391..6ef5e99380f 100644
--- a/arch/x86/math-emu/get_address.c
+++ b/arch/x86/math-emu/get_address.c
@@ -150,11 +150,9 @@ static long pm_address(u_char FPU_modrm, u_char segment,
 #endif /* PARANOID */
 
 	switch (segment) {
-		/* gs isn't used by the kernel, so it still has its
-		   user-space value. */
 	case PREFIX_GS_ - 1:
-		/* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */
-		savesegment(gs, addr->selector);
+		/* user gs handling can be lazy, use special accessors */
+		addr->selector = get_user_gs(FPU_info->regs);
 		break;
 	default:
 		addr->selector = PM_REG_(segment);
-- 
cgit v1.2.3


From ccbeed3a05908d201b47b6c3dd1a373138bba566 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:40 +0900
Subject: x86: make lazy %gs optional on x86_32

Impact: pt_regs changed, lazy gs handling made optional, add slight
        overhead to SAVE_ALL, simplifies error_code path a bit

On x86_32, %gs hasn't been used by kernel and handled lazily.  pt_regs
doesn't have place for it and gs is saved/loaded only when necessary.
In preparation for stack protector support, this patch makes lazy %gs
handling optional by doing the followings.

* Add CONFIG_X86_32_LAZY_GS and place for gs in pt_regs.

* Save and restore %gs along with other registers in entry_32.S unless
  LAZY_GS.  Note that this unfortunately adds "pushl $0" on SAVE_ALL
  even when LAZY_GS.  However, it adds no overhead to common exit path
  and simplifies entry path with error code.

* Define different user_gs accessors depending on LAZY_GS and add
  lazy_save_gs() and lazy_load_gs() which are noop if !LAZY_GS.  The
  lazy_*_gs() ops are used to save, load and clear %gs lazily.

* Define ELF_CORE_COPY_KERNEL_REGS() which always read %gs directly.

xen and lguest changes need to be verified.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                   |   4 ++
 arch/x86/include/asm/elf.h         |  15 ++++-
 arch/x86/include/asm/mmu_context.h |   2 +-
 arch/x86/include/asm/ptrace.h      |   4 +-
 arch/x86/include/asm/system.h      |  12 +++-
 arch/x86/kernel/asm-offsets_32.c   |   1 +
 arch/x86/kernel/entry_32.S         | 132 +++++++++++++++++++++++++++++++------
 arch/x86/kernel/process_32.c       |   4 +-
 arch/x86/kernel/ptrace.c           |   5 +-
 arch/x86/lguest/boot.c             |   2 +-
 arch/x86/xen/enlighten.c           |  17 ++---
 11 files changed, 158 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5c8e353c112..5bcdede71ba 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -207,6 +207,10 @@ config X86_TRAMPOLINE
 	depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
 	default y
 
+config X86_32_LAZY_GS
+	def_bool y
+	depends on X86_32
+
 config KTIME_SCALAR
 	def_bool X86_32
 source "init/Kconfig"
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 39b0aac1675..83c1bc8d2e8 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -112,7 +112,7 @@ extern unsigned int vdso_enabled;
  * now struct_user_regs, they are different)
  */
 
-#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+#define ELF_CORE_COPY_REGS_COMMON(pr_reg, regs)	\
 do {						\
 	pr_reg[0] = regs->bx;			\
 	pr_reg[1] = regs->cx;			\
@@ -124,7 +124,6 @@ do {						\
 	pr_reg[7] = regs->ds & 0xffff;		\
 	pr_reg[8] = regs->es & 0xffff;		\
 	pr_reg[9] = regs->fs & 0xffff;		\
-	pr_reg[10] = get_user_gs(regs);		\
 	pr_reg[11] = regs->orig_ax;		\
 	pr_reg[12] = regs->ip;			\
 	pr_reg[13] = regs->cs & 0xffff;		\
@@ -133,6 +132,18 @@ do {						\
 	pr_reg[16] = regs->ss & 0xffff;		\
 } while (0);
 
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+do {						\
+	ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+	pr_reg[10] = get_user_gs(regs);		\
+} while (0);
+
+#define ELF_CORE_COPY_KERNEL_REGS(pr_reg, regs)	\
+do {						\
+	ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+	savesegment(gs, pr_reg[10]);		\
+} while (0);
+
 #define ELF_PLATFORM	(utsname()->machine)
 #define set_personality_64bit()	do { } while (0)
 
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 4955165682c..f923203dc39 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -79,7 +79,7 @@ do {						\
 #ifdef CONFIG_X86_32
 #define deactivate_mm(tsk, mm)			\
 do {						\
-	set_user_gs(task_pt_regs(tsk), 0);	\
+	lazy_load_gs(0);			\
 } while (0)
 #else
 #define deactivate_mm(tsk, mm)			\
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 6d34d954c22..e304b66abee 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -28,7 +28,7 @@ struct pt_regs {
 	int  xds;
 	int  xes;
 	int  xfs;
-	/* int  gs; */
+	int  xgs;
 	long orig_eax;
 	long eip;
 	int  xcs;
@@ -50,7 +50,7 @@ struct pt_regs {
 	unsigned long ds;
 	unsigned long es;
 	unsigned long fs;
-	/* int  gs; */
+	unsigned long gs;
 	unsigned long orig_ax;
 	unsigned long ip;
 	unsigned long cs;
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 70c74b8db87..79b98e5b96f 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -186,10 +186,20 @@ extern void native_load_gs_index(unsigned);
  * x86_32 user gs accessors.
  */
 #ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_32_LAZY_GS
 #define get_user_gs(regs)	(u16)({unsigned long v; savesegment(gs, v); v;})
 #define set_user_gs(regs, v)	loadsegment(gs, (unsigned long)(v))
 #define task_user_gs(tsk)	((tsk)->thread.gs)
-#endif
+#define lazy_save_gs(v)		savesegment(gs, (v))
+#define lazy_load_gs(v)		loadsegment(gs, (v))
+#else	/* X86_32_LAZY_GS */
+#define get_user_gs(regs)	(u16)((regs)->gs)
+#define set_user_gs(regs, v)	do { (regs)->gs = (v); } while (0)
+#define task_user_gs(tsk)	(task_pt_regs(tsk)->gs)
+#define lazy_save_gs(v)		do { } while (0)
+#define lazy_load_gs(v)		do { } while (0)
+#endif	/* X86_32_LAZY_GS */
+#endif	/* X86_32 */
 
 static inline unsigned long get_limit(unsigned long segment)
 {
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index ee4df08feee..fbf2f33e308 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -75,6 +75,7 @@ void foo(void)
 	OFFSET(PT_DS,  pt_regs, ds);
 	OFFSET(PT_ES,  pt_regs, es);
 	OFFSET(PT_FS,  pt_regs, fs);
+	OFFSET(PT_GS,  pt_regs, gs);
 	OFFSET(PT_ORIG_EAX, pt_regs, orig_ax);
 	OFFSET(PT_EIP, pt_regs, ip);
 	OFFSET(PT_CS,  pt_regs, cs);
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c461925d3b6..82e6868bee4 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -30,12 +30,13 @@
  *	1C(%esp) - %ds
  *	20(%esp) - %es
  *	24(%esp) - %fs
- *	28(%esp) - orig_eax
- *	2C(%esp) - %eip
- *	30(%esp) - %cs
- *	34(%esp) - %eflags
- *	38(%esp) - %oldesp
- *	3C(%esp) - %oldss
+ *	28(%esp) - %gs		saved iff !CONFIG_X86_32_LAZY_GS
+ *	2C(%esp) - orig_eax
+ *	30(%esp) - %eip
+ *	34(%esp) - %cs
+ *	38(%esp) - %eflags
+ *	3C(%esp) - %oldesp
+ *	40(%esp) - %oldss
  *
  * "current" is in register %ebx during any slow entries.
  */
@@ -101,8 +102,99 @@
 #define resume_userspace_sig	resume_userspace
 #endif
 
+/*
+ * User gs save/restore
+ *
+ * %gs is used for userland TLS and kernel only uses it for stack
+ * canary which is required to be at %gs:20 by gcc.  Read the comment
+ * at the top of stackprotector.h for more info.
+ *
+ * Local labels 98 and 99 are used.
+ */
+#ifdef CONFIG_X86_32_LAZY_GS
+
+ /* unfortunately push/pop can't be no-op */
+.macro PUSH_GS
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+.endm
+.macro POP_GS pop=0
+	addl $(4 + \pop), %esp
+	CFI_ADJUST_CFA_OFFSET -(4 + \pop)
+.endm
+.macro POP_GS_EX
+.endm
+
+ /* all the rest are no-op */
+.macro PTGS_TO_GS
+.endm
+.macro PTGS_TO_GS_EX
+.endm
+.macro GS_TO_REG reg
+.endm
+.macro REG_TO_PTGS reg
+.endm
+.macro SET_KERNEL_GS reg
+.endm
+
+#else	/* CONFIG_X86_32_LAZY_GS */
+
+.macro PUSH_GS
+	pushl %gs
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET gs, 0*/
+.endm
+
+.macro POP_GS pop=0
+98:	popl %gs
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_RESTORE gs*/
+  .if \pop <> 0
+	add $\pop, %esp
+	CFI_ADJUST_CFA_OFFSET -\pop
+  .endif
+.endm
+.macro POP_GS_EX
+.pushsection .fixup, "ax"
+99:	movl $0, (%esp)
+	jmp 98b
+.section __ex_table, "a"
+	.align 4
+	.long 98b, 99b
+.popsection
+.endm
+
+.macro PTGS_TO_GS
+98:	mov PT_GS(%esp), %gs
+.endm
+.macro PTGS_TO_GS_EX
+.pushsection .fixup, "ax"
+99:	movl $0, PT_GS(%esp)
+	jmp 98b
+.section __ex_table, "a"
+	.align 4
+	.long 98b, 99b
+.popsection
+.endm
+
+.macro GS_TO_REG reg
+	movl %gs, \reg
+	/*CFI_REGISTER gs, \reg*/
+.endm
+.macro REG_TO_PTGS reg
+	movl \reg, PT_GS(%esp)
+	/*CFI_REL_OFFSET gs, PT_GS*/
+.endm
+.macro SET_KERNEL_GS reg
+	xorl \reg, \reg
+	movl \reg, %gs
+.endm
+
+#endif	/* CONFIG_X86_32_LAZY_GS */
+
 .macro SAVE_ALL
 	cld
+	PUSH_GS
 	pushl %fs
 	CFI_ADJUST_CFA_OFFSET 4
 	/*CFI_REL_OFFSET fs, 0;*/
@@ -138,6 +230,7 @@
 	movl %edx, %es
 	movl $(__KERNEL_PERCPU), %edx
 	movl %edx, %fs
+	SET_KERNEL_GS %edx
 .endm
 
 .macro RESTORE_INT_REGS
@@ -164,7 +257,7 @@
 	CFI_RESTORE eax
 .endm
 
-.macro RESTORE_REGS
+.macro RESTORE_REGS pop=0
 	RESTORE_INT_REGS
 1:	popl %ds
 	CFI_ADJUST_CFA_OFFSET -4
@@ -175,6 +268,7 @@
 3:	popl %fs
 	CFI_ADJUST_CFA_OFFSET -4
 	/*CFI_RESTORE fs;*/
+	POP_GS \pop
 .pushsection .fixup, "ax"
 4:	movl $0, (%esp)
 	jmp 1b
@@ -188,6 +282,7 @@
 	.long 2b, 5b
 	.long 3b, 6b
 .popsection
+	POP_GS_EX
 .endm
 
 .macro RING0_INT_FRAME
@@ -368,6 +463,7 @@ sysenter_exit:
 	xorl %ebp,%ebp
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
+	PTGS_TO_GS
 	ENABLE_INTERRUPTS_SYSEXIT
 
 #ifdef CONFIG_AUDITSYSCALL
@@ -416,6 +512,7 @@ sysexit_audit:
 	.align 4
 	.long 1b,2b
 .popsection
+	PTGS_TO_GS_EX
 ENDPROC(ia32_sysenter_target)
 
 	# system call handler stub
@@ -458,8 +555,7 @@ restore_all:
 restore_nocheck:
 	TRACE_IRQS_IRET
 restore_nocheck_notrace:
-	RESTORE_REGS
-	addl $4, %esp			# skip orig_eax/error_code
+	RESTORE_REGS 4			# skip orig_eax/error_code
 	CFI_ADJUST_CFA_OFFSET -4
 irq_return:
 	INTERRUPT_RETURN
@@ -1078,7 +1174,10 @@ ENTRY(page_fault)
 	CFI_ADJUST_CFA_OFFSET 4
 	ALIGN
 error_code:
-	/* the function address is in %fs's slot on the stack */
+	/* the function address is in %gs's slot on the stack */
+	pushl %fs
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET fs, 0*/
 	pushl %es
 	CFI_ADJUST_CFA_OFFSET 4
 	/*CFI_REL_OFFSET es, 0*/
@@ -1107,20 +1206,15 @@ error_code:
 	CFI_ADJUST_CFA_OFFSET 4
 	CFI_REL_OFFSET ebx, 0
 	cld
-	pushl %fs
-	CFI_ADJUST_CFA_OFFSET 4
-	/*CFI_REL_OFFSET fs, 0*/
 	movl $(__KERNEL_PERCPU), %ecx
 	movl %ecx, %fs
 	UNWIND_ESPFIX_STACK
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	/*CFI_REGISTER es, ecx*/
-	movl PT_FS(%esp), %edi		# get the function address
+	GS_TO_REG %ecx
+	movl PT_GS(%esp), %edi		# get the function address
 	movl PT_ORIG_EAX(%esp), %edx	# get the error code
 	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
-	mov  %ecx, PT_FS(%esp)
-	/*CFI_REL_OFFSET fs, ES*/
+	REG_TO_PTGS %ecx
+	SET_KERNEL_GS %ecx
 	movl $(__USER_DS), %ecx
 	movl %ecx, %ds
 	movl %ecx, %es
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index d58a340e1be..86122fa2a1b 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -539,7 +539,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * used %fs or %gs (it does not today), or if the kernel is
 	 * running inside of a hypervisor layer.
 	 */
-	savesegment(gs, prev->gs);
+	lazy_save_gs(prev->gs);
 
 	/*
 	 * Load the per-thread Thread-Local Storage descriptor.
@@ -585,7 +585,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 * Restore %gs if needed (which is common)
 	 */
 	if (prev->gs | next->gs)
-		loadsegment(gs, next->gs);
+		lazy_load_gs(next->gs);
 
 	percpu_write(current_task, next_p);
 
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 508b6b57d0c..7ec39ab37a2 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -75,10 +75,7 @@ static inline bool invalid_selector(u16 value)
 static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
 {
 	BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
-	regno >>= 2;
-	if (regno > FS)
-		--regno;
-	return &regs->bx + regno;
+	return &regs->bx + (regno >> 2);
 }
 
 static u16 get_segment_reg(struct task_struct *task, unsigned long offset)
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 19e33b6cd59..da2e314f61b 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -283,7 +283,7 @@ static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
 	/* There's one problem which normal hardware doesn't have: the Host
 	 * can't handle us removing entries we're currently using.  So we clear
 	 * the GS register here: if it's needed it'll be reloaded anyway. */
-	loadsegment(gs, 0);
+	lazy_load_gs(0);
 	lazy_hcall(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu, 0);
 }
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 37230342c2c..95ff6a0e942 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -323,13 +323,14 @@ static void load_TLS_descriptor(struct thread_struct *t,
 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 {
 	/*
-	 * XXX sleazy hack: If we're being called in a lazy-cpu zone,
-	 * it means we're in a context switch, and %gs has just been
-	 * saved.  This means we can zero it out to prevent faults on
-	 * exit from the hypervisor if the next process has no %gs.
-	 * Either way, it has been saved, and the new value will get
-	 * loaded properly.  This will go away as soon as Xen has been
-	 * modified to not save/restore %gs for normal hypercalls.
+	 * XXX sleazy hack: If we're being called in a lazy-cpu zone
+	 * and lazy gs handling is enabled, it means we're in a
+	 * context switch, and %gs has just been saved.  This means we
+	 * can zero it out to prevent faults on exit from the
+	 * hypervisor if the next process has no %gs.  Either way, it
+	 * has been saved, and the new value will get loaded properly.
+	 * This will go away as soon as Xen has been modified to not
+	 * save/restore %gs for normal hypercalls.
 	 *
 	 * On x86_64, this hack is not used for %gs, because gs points
 	 * to KERNEL_GS_BASE (and uses it for PDA references), so we
@@ -341,7 +342,7 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 	 */
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
 #ifdef CONFIG_X86_32
-		loadsegment(gs, 0);
+		lazy_load_gs(0);
 #else
 		loadsegment(fs, 0);
 #endif
-- 
cgit v1.2.3


From 60a5317ff0f42dd313094b88f809f63041568b08 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 9 Feb 2009 22:17:40 +0900
Subject: x86: implement x86_32 stack protector

Impact: stack protector for x86_32

Implement stack protector for x86_32.  GDT entry 28 is used for it.
It's set to point to stack_canary-20 and have the length of 24 bytes.
CONFIG_CC_STACKPROTECTOR turns off CONFIG_X86_32_LAZY_GS and sets %gs
to the stack canary segment on entry.  As %gs is otherwise unused by
the kernel, the canary can be anywhere.  It's defined as a percpu
variable.

x86_32 exception handlers take register frame on stack directly as
struct pt_regs.  With -fstack-protector turned on, gcc copies the
whole structure after the stack canary and (of course) doesn't copy
back on return thus losing all changed.  For now, -fno-stack-protector
is added to all files which contain those functions.  We definitely
need something better.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                      |  3 +-
 arch/x86/include/asm/processor.h      |  4 ++
 arch/x86/include/asm/segment.h        |  9 +++-
 arch/x86/include/asm/stackprotector.h | 91 +++++++++++++++++++++++++++++++++--
 arch/x86/include/asm/system.h         | 21 ++++++++
 arch/x86/kernel/Makefile              | 18 +++++++
 arch/x86/kernel/cpu/common.c          | 17 ++++---
 arch/x86/kernel/entry_32.S            |  2 +-
 arch/x86/kernel/head_32.S             | 20 +++++++-
 arch/x86/kernel/process_32.c          |  1 +
 arch/x86/kernel/setup_percpu.c        |  2 +
 11 files changed, 172 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5bcdede71ba..f760a22f95d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -209,7 +209,7 @@ config X86_TRAMPOLINE
 
 config X86_32_LAZY_GS
 	def_bool y
-	depends on X86_32
+	depends on X86_32 && !CC_STACKPROTECTOR
 
 config KTIME_SCALAR
 	def_bool X86_32
@@ -1356,7 +1356,6 @@ config CC_STACKPROTECTOR_ALL
 
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on X86_64
 	select CC_STACKPROTECTOR_ALL
 	help
           This option turns on the -fstack-protector GCC feature. This
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 9763eb70013..5a947210425 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -396,7 +396,11 @@ DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
 DECLARE_INIT_PER_CPU(irq_stack_union);
 
 DECLARE_PER_CPU(char *, irq_stack_ptr);
+#else	/* X86_64 */
+#ifdef CONFIG_CC_STACKPROTECTOR
+DECLARE_PER_CPU(unsigned long, stack_canary);
 #endif
+#endif	/* X86_64 */
 
 extern void print_cpu_info(struct cpuinfo_x86 *);
 extern unsigned int xstate_size;
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 1dc1b51ac62..14e0ed86a6f 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -61,7 +61,7 @@
  *
  *  26 - ESPFIX small SS
  *  27 - per-cpu			[ offset to per-cpu data area ]
- *  28 - unused
+ *  28 - stack_canary-20		[ for stack protector ]
  *  29 - unused
  *  30 - unused
  *  31 - TSS for double fault handler
@@ -95,6 +95,13 @@
 #define __KERNEL_PERCPU 0
 #endif
 
+#define GDT_ENTRY_STACK_CANARY		(GDT_ENTRY_KERNEL_BASE + 16)
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __KERNEL_STACK_CANARY		(GDT_ENTRY_STACK_CANARY * 8)
+#else
+#define __KERNEL_STACK_CANARY		0
+#endif
+
 #define GDT_ENTRY_DOUBLEFAULT_TSS	31
 
 /*
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index ee275e9f48a..fa7e5bd6fbe 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -1,3 +1,35 @@
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and unfortunately gcc requires it to be at a fixed offset from %gs.
+ * On x86_64, the offset is 40 bytes and on x86_32 20 bytes.  x86_64
+ * and x86_32 use segment registers differently and thus handles this
+ * requirement differently.
+ *
+ * On x86_64, %gs is shared by percpu area and stack canary.  All
+ * percpu symbols are zero based and %gs points to the base of percpu
+ * area.  The first occupant of the percpu area is always
+ * irq_stack_union which contains stack_canary at offset 40.  Userland
+ * %gs is always saved and restored on kernel entry and exit using
+ * swapgs, so stack protector doesn't add any complexity there.
+ *
+ * On x86_32, it's slightly more complicated.  As in x86_64, %gs is
+ * used for userland TLS.  Unfortunately, some processors are much
+ * slower at loading segment registers with different value when
+ * entering and leaving the kernel, so the kernel uses %fs for percpu
+ * area and manages %gs lazily so that %gs is switched only when
+ * necessary, usually during task switch.
+ *
+ * As gcc requires the stack canary at %gs:20, %gs can't be managed
+ * lazily if stack protector is enabled, so the kernel saves and
+ * restores userland %gs on kernel entry and exit.  This behavior is
+ * controlled by CONFIG_X86_32_LAZY_GS and accessors are defined in
+ * system.h to hide the details.
+ */
+
 #ifndef _ASM_STACKPROTECTOR_H
 #define _ASM_STACKPROTECTOR_H 1
 
@@ -6,8 +38,18 @@
 #include <asm/tsc.h>
 #include <asm/processor.h>
 #include <asm/percpu.h>
+#include <asm/system.h>
+#include <asm/desc.h>
 #include <linux/random.h>
 
+/*
+ * 24 byte read-only segment initializer for stack canary.  Linker
+ * can't handle the address bit shifting.  Address will be set in
+ * head_32 for boot CPU and setup_per_cpu_areas() for others.
+ */
+#define GDT_STACK_CANARY_INIT						\
+	[GDT_ENTRY_STACK_CANARY] = { { { 0x00000018, 0x00409000 } } },
+
 /*
  * Initialize the stackprotector canary value.
  *
@@ -19,12 +61,9 @@ static __always_inline void boot_init_stack_canary(void)
 	u64 canary;
 	u64 tsc;
 
-	/*
-	 * Build time only check to make sure the stack_canary is at
-	 * offset 40 in the pda; this is a gcc ABI requirement
-	 */
+#ifdef CONFIG_X86_64
 	BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
-
+#endif
 	/*
 	 * We both use the random pool and the current TSC as a source
 	 * of randomness. The TSC only matters for very early init,
@@ -36,7 +75,49 @@ static __always_inline void boot_init_stack_canary(void)
 	canary += tsc + (tsc << 32UL);
 
 	current->stack_canary = canary;
+#ifdef CONFIG_X86_64
 	percpu_write(irq_stack_union.stack_canary, canary);
+#else
+	percpu_write(stack_canary, canary);
+#endif
+}
+
+static inline void setup_stack_canary_segment(int cpu)
+{
+#ifdef CONFIG_X86_32
+	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
+	struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
+	struct desc_struct desc;
+
+	desc = gdt_table[GDT_ENTRY_STACK_CANARY];
+	desc.base0 = canary & 0xffff;
+	desc.base1 = (canary >> 16) & 0xff;
+	desc.base2 = (canary >> 24) & 0xff;
+	write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
+#endif
+}
+
+static inline void load_stack_canary_segment(void)
+{
+#ifdef CONFIG_X86_32
+	asm("mov %0, %%gs" : : "r" (__KERNEL_STACK_CANARY) : "memory");
+#endif
+}
+
+#else	/* CC_STACKPROTECTOR */
+
+#define GDT_STACK_CANARY_INIT
+
+/* dummy boot_init_stack_canary() is defined in linux/stackprotector.h */
+
+static inline void setup_stack_canary_segment(int cpu)
+{ }
+
+static inline void load_stack_canary_segment(void)
+{
+#ifdef CONFIG_X86_32
+	asm volatile ("mov %0, %%gs" : : "r" (0));
+#endif
 }
 
 #endif	/* CC_STACKPROTECTOR */
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 79b98e5b96f..2692ee8ef03 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -23,6 +23,22 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #ifdef CONFIG_X86_32
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __switch_canary							\
+	"movl "__percpu_arg([current_task])",%%ebx\n\t"			\
+	"movl %P[task_canary](%%ebx),%%ebx\n\t"				\
+	"movl %%ebx,"__percpu_arg([stack_canary])"\n\t"
+#define __switch_canary_oparam						\
+	, [stack_canary] "=m" (per_cpu_var(stack_canary))
+#define __switch_canary_iparam						\
+	, [current_task] "m" (per_cpu_var(current_task))		\
+	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
+#else	/* CC_STACKPROTECTOR */
+#define __switch_canary
+#define __switch_canary_oparam
+#define __switch_canary_iparam
+#endif	/* CC_STACKPROTECTOR */
+
 /*
  * Saving eflags is important. It switches not only IOPL between tasks,
  * it also protects other tasks from NT leaking through sysenter etc.
@@ -46,6 +62,7 @@ do {									\
 		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
 		     "jmp __switch_to\n"	/* regparm call  */	\
 		     "1:\t"						\
+		     __switch_canary					\
 		     "popl %%ebp\n\t"		/* restore EBP   */	\
 		     "popfl\n"			/* restore flags */	\
 									\
@@ -58,6 +75,8 @@ do {									\
 		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
 		       "=S" (esi), "=D" (edi)				\
 		       							\
+		       __switch_canary_oparam				\
+									\
 		       /* input parameters: */				\
 		     : [next_sp]  "m" (next->thread.sp),		\
 		       [next_ip]  "m" (next->thread.ip),		\
@@ -66,6 +85,8 @@ do {									\
 		       [prev]     "a" (prev),				\
 		       [next]     "d" (next)				\
 									\
+		       __switch_canary_iparam				\
+									\
 		     : /* reloaded segment registers */			\
 			"memory");					\
 } while (0)
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 37fa30bada1..b1f8be33300 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -24,6 +24,24 @@ CFLAGS_vsyscall_64.o	:= $(PROFILING) -g0 $(nostackp)
 CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc.o		:= $(nostackp)
 CFLAGS_paravirt.o	:= $(nostackp)
+#
+# On x86_32, register frame is passed verbatim on stack as struct
+# pt_regs.  gcc considers the parameter to belong to the callee and
+# with -fstack-protector it copies pt_regs to the callee's stack frame
+# to put the structure after the stack canary causing changes made by
+# the exception handlers to be lost.  Turn off stack protector for all
+# files containing functions which take struct pt_regs from register
+# frame.
+#
+# The proper way to fix this is to teach gcc that the argument belongs
+# to the caller for these functions, oh well...
+#
+ifdef CONFIG_X86_32
+CFLAGS_process_32.o	:= $(nostackp)
+CFLAGS_vm86_32.o	:= $(nostackp)
+CFLAGS_signal.o		:= $(nostackp)
+CFLAGS_traps.o		:= $(nostackp)
+endif
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 41b0de6df87..260fe4cb2c8 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -39,6 +39,7 @@
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/hypervisor.h>
+#include <asm/stackprotector.h>
 
 #include "cpu.h"
 
@@ -122,6 +123,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 
 	[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
 	[GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } },
+	GDT_STACK_CANARY_INIT
 #endif
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
@@ -261,6 +263,7 @@ void load_percpu_segment(int cpu)
 	loadsegment(gs, 0);
 	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
 #endif
+	load_stack_canary_segment();
 }
 
 /* Current gdt points %fs at the "master" per-cpu area: after this,
@@ -946,16 +949,21 @@ unsigned long kernel_eflags;
  */
 DEFINE_PER_CPU(struct orig_ist, orig_ist);
 
-#else
+#else	/* x86_64 */
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+DEFINE_PER_CPU(unsigned long, stack_canary);
+#endif
 
-/* Make sure %fs is initialized properly in idle threads */
+/* Make sure %fs and %gs are initialized properly in idle threads */
 struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
 {
 	memset(regs, 0, sizeof(struct pt_regs));
 	regs->fs = __KERNEL_PERCPU;
+	regs->gs = __KERNEL_STACK_CANARY;
 	return regs;
 }
-#endif
+#endif	/* x86_64 */
 
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
@@ -1120,9 +1128,6 @@ void __cpuinit cpu_init(void)
 	__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
 #endif
 
-	/* Clear %gs. */
-	asm volatile ("mov %0, %%gs" : : "r" (0));
-
 	/* Clear all 6 debug registers: */
 	set_debugreg(0, 0);
 	set_debugreg(0, 1);
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 82e6868bee4..5f5bd22adcd 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -186,7 +186,7 @@
 	/*CFI_REL_OFFSET gs, PT_GS*/
 .endm
 .macro SET_KERNEL_GS reg
-	xorl \reg, \reg
+	movl $(__KERNEL_STACK_CANARY), \reg
 	movl \reg, %gs
 .endm
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 24c0e5cd71e..924e31615fb 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -19,6 +19,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/setup.h>
 #include <asm/processor-flags.h>
+#include <asm/percpu.h>
 
 /* Physical address */
 #define pa(X) ((X) - __PAGE_OFFSET)
@@ -437,8 +438,25 @@ is386:	movl $2,%ecx		# set MP
 	movl $(__KERNEL_PERCPU), %eax
 	movl %eax,%fs			# set this cpu's percpu
 
-	xorl %eax,%eax			# Clear GS and LDT
+#ifdef CONFIG_CC_STACKPROTECTOR
+	/*
+	 * The linker can't handle this by relocation.  Manually set
+	 * base address in stack canary segment descriptor.
+	 */
+	cmpb $0,ready
+	jne 1f
+	movl $per_cpu__gdt_page,%eax
+	movl $per_cpu__stack_canary,%ecx
+	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
+	shrl $16, %ecx
+	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
+	movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
+1:
+#endif
+	movl $(__KERNEL_STACK_CANARY),%eax
 	movl %eax,%gs
+
+	xorl %eax,%eax			# Clear LDT
 	lldt %ax
 
 	cld			# gcc2 wants the direction flag cleared at all times
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 86122fa2a1b..9a62383e7c3 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -212,6 +212,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ds = __USER_DS;
 	regs.es = __USER_DS;
 	regs.fs = __KERNEL_PERCPU;
+	regs.gs = __KERNEL_STACK_CANARY;
 	regs.orig_ax = -1;
 	regs.ip = (unsigned long) kernel_thread_helper;
 	regs.cs = __KERNEL_CS | get_kernel_rpl();
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ef91747bbed..d992e6cff73 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -16,6 +16,7 @@
 #include <asm/proto.h>
 #include <asm/cpumask.h>
 #include <asm/cpu.h>
+#include <asm/stackprotector.h>
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
 # define DBG(x...) printk(KERN_DEBUG x)
@@ -95,6 +96,7 @@ void __init setup_per_cpu_areas(void)
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
+		setup_stack_canary_segment(cpu);
 		/*
 		 * Copy data used in early init routines from the
 		 * initial arrays to the per cpu data areas.  These
-- 
cgit v1.2.3


From 93faee1d509926b844ad021e941a194e898f68dd Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 26 Jan 2009 17:24:51 +0100
Subject: [ARM] 5371/1: ep93xx: add i2c device to edb9307a

Add the on-board rtc i2c device to the edb9307a platform init.

The EP93xx based EDB9307A dev board has an on-board ISL1208 RTC
connected to the I2C bus.  Now that the core code supports the
I2C bus, this patch will add support for the device.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/edb9307a.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
index 5b5c22b681b..6171167d331 100644
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ b/arch/arm/mach-ep93xx/edb9307a.c
@@ -48,12 +48,24 @@ static struct ep93xx_eth_data edb9307a_eth_data = {
 	.phy_id		= 1,
 };
 
+static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
+	{
+		/* On-board battery backed RTC */
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+	/*
+	 * The I2C signals are also routed to the Expansion Connector (J4)
+	 */
+};
+
 static void __init edb9307a_init_machine(void)
 {
 	ep93xx_init_devices();
 	platform_device_register(&edb9307a_flash);
 
 	ep93xx_register_eth(&edb9307a_eth_data, 1);
+
+	ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
 }
 
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-- 
cgit v1.2.3


From b74788d8c118a48585ad5342560e0aea6ed0ccd4 Mon Sep 17 00:00:00 2001
From: Daniel Silverstone <dsilvers@simtec.co.uk>
Date: Thu, 29 Jan 2009 11:33:10 +0100
Subject: [ARM] 5372/1: ACS5K: Core board support for the ACS-5000

This patch provides the core board support for the Brivo Systems
LLC ACS-5000 master board for automated door/card-reader etc
management.

Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/acs5k_defconfig      | 1233 +++++++++++++++++++++++++++++++++
 arch/arm/configs/acs5k_tiny_defconfig |  941 +++++++++++++++++++++++++
 arch/arm/mach-ks8695/Kconfig          |    6 +
 arch/arm/mach-ks8695/Makefile         |    1 +
 arch/arm/mach-ks8695/board-acs5k.c    |  233 +++++++
 5 files changed, 2414 insertions(+)
 create mode 100644 arch/arm/configs/acs5k_defconfig
 create mode 100644 arch/arm/configs/acs5k_tiny_defconfig
 create mode 100644 arch/arm/mach-ks8695/board-acs5k.c

(limited to 'arch')

diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
new file mode 100644
index 00000000000..1cab4e79d36
--- /dev/null
+++ b/arch/arm/configs/acs5k_defconfig
@@ -0,0 +1,1233 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Dec 16 13:31:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+CONFIG_MACH_DSM320=y
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
new file mode 100644
index 00000000000..8e3d084afd7
--- /dev/null
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -0,0 +1,941 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Jan  6 13:23:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+# CONFIG_MACH_KS8695 is not set
+# CONFIG_MACH_DSM320 is not set
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index 2754daabda5..fe0c82e30b2 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -14,6 +14,12 @@ config MACH_DSM320
 	  Say 'Y' here if you want your kernel to run on the D-Link
 	  DSM-320 Wireless Media Player.
 
+config MACH_ACS5K
+	bool "Brivo Systems LLC, ACS-5000 Master board"
+	help
+	  say 'Y' here if you want your kernel to run on the Brivo
+	  Systems LLC, ACS-5000 Master board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index f735d2cc029..7e3e8160ed3 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_LEDS)		+= leds.o
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
 obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
+obj-$(CONFIG_MACH_ACS5K)	+= board-acs5k.o
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
new file mode 100644
index 00000000000..9e3e5a640ad
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -0,0 +1,233 @@
+/*
+ * arch/arm/mach-ks8695/board-acs5k.c
+ *
+ * Brivo Systems LLC, ACS-5000 Master Board
+ *
+ * Copyright 2008 Simtec Electronics
+ *		  Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
+	.sda_pin	= 4,
+	.scl_pin	= 5,
+	.udelay		= 10,
+};
+
+static struct platform_device acs5k_i2c_device = {
+	.name		= "i2c-gpio",
+	.id		= -1,
+	.num_resources	= 0,
+	.resource	= NULL,
+	.dev		= {
+		.platform_data	= &acs5k_i2c_device_platdata,
+	},
+};
+
+static int acs5k_pca9555_setup(struct i2c_client *client,
+			       unsigned gpio_base, unsigned ngpio,
+			       void *context)
+{
+	static int acs5k_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
+		if (acs5k_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+					      acs5k_gpio_value[n]);
+		gpio_export(gpio_base + n, 0); /* Export, direction locked down */
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
+	.gpio_base	= 16, /* Start directly after the CPU's GPIO */
+	.invert		= 0, /* Do not invert */
+	.setup		= acs5k_pca9555_setup,
+};
+
+static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+	{
+		I2C_BOARD_INFO("pca9555", 0x20),
+		.platform_data = &acs5k_i2c_pca9555_platdata,
+	},
+};
+
+static void __devinit acs5k_i2c_init(void)
+{
+	/* The gpio interface */
+	platform_device_register(&acs5k_i2c_device);
+	/* I2C devices */
+	i2c_register_board_info(0, acs5k_i2c_devs,
+				ARRAY_SIZE(acs5k_i2c_devs));
+}
+
+static struct mtd_partition acs5k_nor_partitions[] = {
+	[0] = {
+		.name	= "Boot Agent and config",
+		.size	= SZ_256K,
+		.offset	= 0,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	[1] = {
+		.name	= "Kernel",
+		.size	= SZ_1M,
+		.offset	= SZ_256K,
+	},
+	[2] = {
+		.name	= "SquashFS1",
+		.size	= SZ_2M,
+		.offset	= SZ_256K + SZ_1M,
+	},
+	[3] = {
+		.name	= "SquashFS2",
+		.size	= SZ_4M + SZ_2M,
+		.offset	= SZ_256K + SZ_1M + SZ_2M,
+	},
+	[4] = {
+		.name	= "Data",
+		.size	= SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
+		.offset	= SZ_256K + SZ_8M + SZ_1M,
+	}
+};
+
+static struct physmap_flash_data acs5k_nor_pdata = {
+	.width		= 4,
+	.nr_parts	= ARRAY_SIZE(acs5k_nor_partitions),
+	.parts		= acs5k_nor_partitions,
+};
+
+static struct resource acs5k_nor_resource[] = {
+	[0] = {
+		.start = SZ_32M, /* We expect the bootloader to map
+				  * the flash here.
+				  */
+		.end   = SZ_32M + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SZ_32M + SZ_16M,
+		.end   = SZ_32M + SZ_32M - SZ_256K - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device acs5k_device_nor = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(acs5k_nor_resource),
+	.resource	= acs5k_nor_resource,
+	.dev		= {
+		.platform_data = &acs5k_nor_pdata,
+	},
+};
+
+static void __init acs5k_register_nor(void)
+{
+	int ret;
+
+	if (acs5k_nor_partitions[0].mask_flags == 0)
+		printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
+
+	ret = platform_device_register(&acs5k_device_nor);
+	if (ret < 0)
+		printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static int __init acs5k_protection_setup(char *s)
+{
+	/* We can't allocate anything here but we should be able
+	 * to trivially parse s and decide if we can protect the
+	 * bootloader partition or not
+	 */
+	if (strcmp(s, "no") == 0)
+		acs5k_nor_partitions[0].mask_flags = 0;
+
+	return 1;
+}
+
+__setup("protect_bootloader=", acs5k_protection_setup);
+
+static void __init acs5k_init_gpio(void)
+{
+	int i;
+
+	ks8695_register_gpios();
+	for (i = 0; i < 4; ++i)
+		gpio_request(i, "ACS5K IRQ");
+	gpio_request(7, "ACS5K KS_FRDY");
+	for (i = 8; i < 16; ++i)
+		gpio_request(i, "ACS5K Unused");
+
+	gpio_request(3, "ACS5K CAN Control");
+	gpio_request(6, "ACS5K Heartbeat");
+	gpio_direction_output(3, 1); /* Default CAN_RESET high */
+	gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
+	gpio_export(3, 0); /* export CAN_RESET as output only */
+	gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
+}
+
+static void __init acs5k_init(void)
+{
+	acs5k_init_gpio();
+
+	/* Network device */
+	ks8695_add_device_lan();	/* eth0 = LAN */
+	ks8695_add_device_wan();	/* ethX = WAN */
+
+	/* NOR devices */
+	acs5k_register_nor();
+
+	/* I2C bus */
+	acs5k_i2c_init();
+}
+
+MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
+	/* Maintainer: Simtec Electronics. */
+	.phys_io	= KS8695_IO_PA,
+	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
+	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= acs5k_init,
+	.timer		= &ks8695_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 17198f2d681d34b3376f3a55b2837e56062c2439 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Wed, 4 Feb 2009 05:01:38 +0100
Subject: [ARM] 5374/1: The w90p910 uart0 driver patch

Add W90P910 UART0 support,the W90P910 UART0 is 8250 series.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/cpu.h             | 17 +++++----
 arch/arm/mach-w90x900/mach-w90p910evb.c | 10 +----
 arch/arm/mach-w90x900/w90p910.c         | 67 +++++++--------------------------
 3 files changed, 24 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 40ff40845df..001d50915e3 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -43,6 +43,7 @@ extern void w90p910_init_io(struct map_desc *mach_desc, int size);
 extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
 extern void w90p910_init_clocks(int xtal);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
 
 #define W90X900_RES(name)				\
@@ -67,11 +68,13 @@ struct platform_device w90x900_##devname = {				\
 	.resource 	= w90x900_##regname##_resource,			\
 }
 
-#define W90X900_UARTCFG(port, flag, uc, ulc, ufc)	\
-{							\
-		.hwport	= port,				\
-		.flags	= flag,				\
-		.ucon	= uc,				\
-		.ulcon	= ulc,				\
-		.ufcon	= ufc,				\
+#define W90X900_8250PORT(name)					\
+{								\
+	.membase	= name##_BA,				\
+	.mapbase	= name##_PA,				\
+	.irq		= IRQ_##name,				\
+	.uartclk	= 11313600,				\
+	.regshift	= 2,					\
+	.iotype		= UPIO_MEM,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 9ebc93f4853..542527019b6 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -36,24 +36,16 @@
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
-static struct w90x900_uartcfg w90p910_uartcfgs[] = {
-	W90X900_UARTCFG(0, 0, 0, 0, 0),
-	W90X900_UARTCFG(1, 0, 0, 0, 0),
-	W90X900_UARTCFG(2, 0, 0, 0, 0),
-	W90X900_UARTCFG(3, 0, 0, 0, 0),
-	W90X900_UARTCFG(4, 0, 0, 0, 0),
-};
-
 /*Here should be your evb resourse,such as LCD*/
 
 static struct platform_device *w90p910evb_dev[] __initdata = {
+	&w90p910_serial_device,
 };
 
 static void __init w90p910evb_map_io(void)
 {
 	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
 	w90p910_init_clocks(0);
-	w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
 }
 
 static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index aa783bc9431..2bcbaa681b9 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/serial_8250.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -36,12 +37,6 @@
 
 #include "cpu.h"
 
-/*W90P910 has five uarts*/
-
-#define MAX_UART_COUNT 5
-static int uart_count;
-static struct platform_device *uart_devs[MAX_UART_COUNT-1];
-
 /* Initial IO mappings */
 
 static struct map_desc w90p910_iodesc[] __initdata = {
@@ -53,48 +48,19 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 	/*IODESC_ENT(LCD),*/
 };
 
-/*Init the dev resource*/
-
-static W90X900_RES(UART0);
-static W90X900_RES(UART1);
-static W90X900_RES(UART2);
-static W90X900_RES(UART3);
-static W90X900_RES(UART4);
-static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
-static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
-static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
-static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
-static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
-
-static struct platform_device *uart_devices[] __initdata = {
-	&w90x900_uart0,
-	&w90x900_uart1,
-	&w90x900_uart2,
-	&w90x900_uart3,
-	&w90x900_uart4
-};
+/* Initial serial platform data */
 
-/*Init W90P910 uart device*/
+struct plat_serial8250_port w90p910_uart_data[] = {
+	W90X900_8250PORT(UART0),
+};
 
-void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	int uart, uartdev;
-
-	/*By min() to judge count of uart be used indeed*/
-
-	uartdev = ARRAY_SIZE(uart_devices);
-	no = min(uartdev, no);
-
-	for (uart = 0; uart < no; uart++, cfg++) {
-		if (cfg->hwport != uart)
-			printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
-		platdev = uart_devices[cfg->hwport];
-		uart_devs[uart] = platdev;
-		platdev->dev.platform_data = cfg;
-	}
-	uart_count = uart;
-}
+struct platform_device w90p910_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= w90p910_uart_data,
+	},
+};
 
 /*Init W90P910 evb io*/
 
@@ -122,13 +88,6 @@ static int __init w90p910_init_cpu(void)
 
 static int __init w90x900_arch_init(void)
 {
-	int ret;
-
-	ret = w90p910_init_cpu();
-	if (ret != 0)
-		return ret;
-
-	return platform_add_devices(uart_devs, uart_count);
-
+	return w90p910_init_cpu();
 }
 arch_initcall(w90x900_arch_init);
-- 
cgit v1.2.3


From b4e411294a193e18c41912bc3df03f5b9cd7c823 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Wed, 4 Feb 2009 16:47:38 +0100
Subject: [ARM] 5375/1: PATCH - update jornada720.c to reflect driver additions

This patch updates the list of devices activated at init
to also include the keyboard and touchscreen structs.
We also remove a non-needed #ifdef.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/jornada720.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 81848aa9642..fd776bb666c 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -226,12 +226,22 @@ static struct platform_device jornada_ssp_device = {
 	.id             = -1,
 };
 
+static struct platform_device jornada_kbd_device = {
+	.name		= "jornada720_kbd",
+	.id		= -1,
+};
+
+static struct platform_device jornada_ts_device = {
+	.name		= "jornada_ts",
+	.id		= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
-#ifdef CONFIG_SA1100_JORNADA720_SSP
 	&jornada_ssp_device,
-#endif
 	&s1d13xxxfb_device,
+	&jornada_kbd_device,
+	&jornada_ts_device,
 };
 
 static int __init jornada720_init(void)
-- 
cgit v1.2.3


From 4ce255c1420dd7c4b97ad4dabd13fa5d862ad700 Mon Sep 17 00:00:00 2001
From: Jaya Kumar <jayakumar.lkml@gmail.com>
Date: Thu, 1 Jan 2009 17:51:01 +0100
Subject: [ARM] 5354/1: mach-pxa: add AM300 platform driver v3

This patch adds support for the AM300 platform driver which uses the
E-Ink broadsheetfb display driver.

Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig                |   3 +
 arch/arm/mach-pxa/Makefile               |   1 +
 arch/arm/mach-pxa/am300epd.c             | 295 +++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/gumstix.c              |   6 +
 arch/arm/mach-pxa/include/mach/gumstix.h |   1 +
 5 files changed, 306 insertions(+)
 create mode 100644 arch/arm/mach-pxa/am300epd.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ffd28e48d75..9c2221c2366 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -40,6 +40,9 @@ choice
 config GUMSTIX_AM200EPD
 	bool "Enable AM200EPD board support"
 
+config GUMSTIX_AM300EPD
+	bool "Enable AM300EPD board support"
+
 endchoice
 
 config MACH_INTELMOTE2
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 146aba72fa2..6bfbddc5769 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
new file mode 100644
index 00000000000..4bd10a17332
--- /dev/null
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -0,0 +1,295 @@
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+	GPIO16_GPIO,
+	GPIO17_GPIO,
+	GPIO32_GPIO,
+	GPIO48_GPIO,
+	GPIO49_GPIO,
+	GPIO51_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+
+	/* this is the 16-bit hdb bus 58-73 */
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN	16
+#define CFG_GPIO_PIN	17
+#define RDY_GPIO_PIN	32
+#define DC_GPIO_PIN	48
+#define RST_GPIO_PIN	49
+#define LED_GPIO_PIN	51
+#define RD_GPIO_PIN	74
+#define WR_GPIO_PIN	75
+#define CS_GPIO_PIN	76
+#define IRQ_GPIO_PIN	77
+
+/* hdb bus */
+#define DB0_GPIO_PIN	58
+#define DB15_GPIO_PIN	73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+			IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+				"CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+	/* todo: improve err recovery */
+	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+	return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+	int i;
+	int err;
+	char dbname[8];
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am300_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	/* we also need to take care of the hdb bus */
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+		sprintf(dbname, "DB%d", i);
+		err = gpio_request(i, dbname);
+		if (err) {
+			dev_err(&am300_device->dev, "failed requesting "
+				"gpio %d, err=%d\n", i, err);
+			while (i >= DB0_GPIO_PIN)
+				gpio_free(i--);
+			i = ARRAY_SIZE(gpios) - 1;
+			goto err_req_gpio;
+		}
+	}
+
+	/* setup the outputs and init values */
+	gpio_direction_output(PWR_GPIO_PIN, 0);
+	gpio_direction_output(CFG_GPIO_PIN, 1);
+	gpio_direction_output(DC_GPIO_PIN, 0);
+	gpio_direction_output(RD_GPIO_PIN, 1);
+	gpio_direction_output(WR_GPIO_PIN, 1);
+	gpio_direction_output(CS_GPIO_PIN, 1);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	/* setup the inputs */
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(IRQ_GPIO_PIN);
+
+	/* start the hdb bus as an input */
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+		gpio_direction_output(i, 0);
+
+	/* go into command mode */
+	gpio_set_value(CFG_GPIO_PIN, 1);
+	gpio_set_value(RST_GPIO_PIN, 0);
+	msleep(10);
+	gpio_set_value(RST_GPIO_PIN, 1);
+	msleep(10);
+	am300_wait_event(par);
+
+	return 0;
+
+err_req_gpio:
+	while (i > 0)
+		gpio_free(gpios[i--]);
+
+	return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+	return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+	int i;
+
+	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+
+	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+		gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+	u16 res = 0;
+	int i;
+
+	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+	return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+	int i;
+
+	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+				u8 state)
+{
+	switch (bit) {
+	case BS_CS:
+		gpio_set_value(CS_GPIO_PIN, state);
+		break;
+	case BS_DC:
+		gpio_set_value(DC_GPIO_PIN, state);
+		break;
+	case BS_WR:
+		gpio_set_value(WR_GPIO_PIN, state);
+		break;
+	}
+}
+
+static int am300_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+	struct broadsheetfb_par *par = dev_id;
+
+	wake_up(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+	int ret;
+	struct broadsheetfb_par *par = info->par;
+
+	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+				IRQF_DISABLED|IRQF_TRIGGER_RISING,
+				"AM300", par);
+	if (ret)
+		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static struct broadsheet_board am300_board = {
+	.owner			= THIS_MODULE,
+	.init			= am300_init_board,
+	.cleanup		= am300_cleanup,
+	.set_hdb		= am300_set_hdb,
+	.get_hdb		= am300_get_hdb,
+	.set_ctl		= am300_set_ctl,
+	.wait_for_rdy		= am300_wait_event,
+	.get_panel_type		= am300_get_panel_type,
+	.setup_irq		= am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+	int ret;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+	/* request our platform independent driver */
+	request_module("broadsheetfb");
+
+	am300_device = platform_device_alloc("broadsheetfb", -1);
+	if (!am300_device)
+		return -ENOMEM;
+
+	/* the am300_board that will be seen by broadsheetfb is a copy */
+	platform_device_add_data(am300_device, &am300_board,
+					sizeof(am300_board));
+
+	ret = platform_device_add(am300_device);
+
+	if (ret) {
+		platform_device_put(am300_device);
+		return ret;
+	}
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index e296ce11658..9cb4a074d9f 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -191,6 +191,11 @@ int __attribute__((weak)) am200_init(void)
 	return 0;
 }
 
+int __attribute__((weak)) am300_init(void)
+{
+	return 0;
+}
+
 static void __init carrier_board_init(void)
 {
 	/*
@@ -198,6 +203,7 @@ static void __init carrier_board_init(void)
 	 * they cannot be detected programatically
 	 */
 	am200_init();
+	am300_init();
 }
 
 static void __init gumstix_init(void)
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 099f54a41de..06abd416060 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -97,4 +97,5 @@ has detected a cable insertion; driven low otherwise. */
 
 /* for expansion boards that can't be programatically detected */
 extern int am200_init(void);
+extern int am300_init(void);
 
-- 
cgit v1.2.3


From b7eb1a5ed50c6f622664bb8a7113313fa8b6dd1e Mon Sep 17 00:00:00 2001
From: Zbynek Michl <Zbynek.Michl@seznam.cz>
Date: Fri, 2 Jan 2009 00:26:13 +0100
Subject: [ARM] 5355/1: Adding support for the HTC Himalaya and its framebuffer

Patch adds support for the HTC Himalaya device. It includes hardware definitions and w100fb support.

Signed-off-by: Zbynek Michl <Zbynek.Michl@seznam.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/Kconfig    |   5 ++
 arch/arm/mach-pxa/Makefile   |   1 +
 arch/arm/mach-pxa/himalaya.c | 168 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 arch/arm/mach-pxa/himalaya.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 9c2221c2366..04d1a07ced7 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -305,6 +305,11 @@ config MACH_MAGICIAN
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 6bfbddc5769..361fcfa7531 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
new file mode 100644
index 00000000000..00884e5a604
--- /dev/null
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -0,0 +1,168 @@
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+	.lcd_format =        0x00000003,
+	.lcdd_cntl1 =        0x00000000,
+	.lcdd_cntl2 =        0x0003ffff,
+	.genlcd_cntl1 =      0x00fff003,
+	.genlcd_cntl2 =      0x00000003,
+	.genlcd_cntl3 =      0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 0,
+	.right_margin 	= 31,
+	.upper_margin 	= 15,
+	.lower_margin 	= 0,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls	= 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0x81700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 80,
+	.pixclk_divider = 15,
+	.pixclk_divider_rotated = 15,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 0,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+	.xres 		= 240,
+	.yres 		= 320,
+	.left_margin 	= 9,
+	.right_margin 	= 8,
+	.upper_margin 	= 5,
+	.lower_margin 	= 4,
+	.crtc_ss	= 0x80150014,
+	.crtc_ls	= 0xa0fb00f7,
+	.crtc_gs	= 0xc0080007,
+	.crtc_vpos_gs	= 0x00080007,
+	.crtc_rev	= 0x0000000a,
+	.crtc_dclk	= 0xa1700030,
+	.crtc_gclk	= 0x8015010f,
+	.crtc_goe	= 0x00000000,
+	.pll_freq 	= 95,
+	.pixclk_divider = 0xb,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_PLL,
+	.sysclk_divider = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
+	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
+	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
+	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
+	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
+	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+	.num_modes  = 1,
+	.regs       = &himalaya_lcd_regs,
+	.gpio       = &himalaya_w100_gpio_info,
+	.xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+	[0] = {
+		.start	= 0x08000000,
+		.end	= 0x08ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device himalaya_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &himalaya_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
+	.resource       = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+	int himalaya_boardid;
+
+	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+		himalaya_boardid);
+
+	switch (himalaya_boardid) {
+	case 0x4:
+		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+	break;
+	case 0x6:
+		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+	break;
+	default:
+		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+			himalaya_boardid);
+		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+	}
+}
+
+static void __init himalaya_init(void)
+{
+	himalaya_lcd_init();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params = 0xa0000100,
+	.map_io = pxa_map_io,
+	.init_irq = pxa25x_init_irq,
+	.init_machine = himalaya_init,
+	.timer = &pxa_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 0e81cb59c7120191c0243c686b591797bc79e5c6 Mon Sep 17 00:00:00 2001
From: Alok Kataria <akataria@vmware.com>
Date: Tue, 10 Feb 2009 16:45:37 -0800
Subject: x86, apic: fix initialization of wakeup_cpu

With refactoring of wake_cpu macros the 32bit code in tip doesn't
execute generic_apic_probe if CONFIG_X86_32_NON_STANDARD is not set.

Even on a x86 STANDARD cpu we need to execute the generic_apic_probe
function, as we rely on this function to execute the update_genapic
quirk which initilizes apic->wakeup_cpu.

Failing to do so results in we making a call to a null function in do_boot_cpu.

The stack trace without the patch goes like this.

Booting processor 1 APIC 0x1 ip 0x6000
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<(null)>] (null)
*pdpt = 0000000000839001 *pde = 0000000000c97067 *pte = 0000000000000163
Oops: 0000 [#1] SMP
last sysfs file:
Modules linked in:

Pid: 1, comm: swapper Not tainted (2.6.29-rc4-tip #18) VMware Virtual Platform
EIP: 0062:[<00000000>] EFLAGS: 00010293 CPU: 0
EIP is at 0x0
EAX: 00000001 EBX: 00006000 ECX: c077ed00 EDX: 00006000
ESI: 00000001 EDI: 00000001 EBP: ef04cf40 ESP: ef04cf1c
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 006a
Process swapper (pid: 1, ti=ef04c000 task=ef050000 task.ti=ef04c000)
Stack:
 c0644e52 00000000 ef04cf24 ef04cf24 c064468d c0886dc0 00000000 c0702aea
 ef055480 00000001 00000101 dead4ead ffffffff ffffffff c08af530 00000000
 c0709715 ef04cf60 ef04cf60 00000001 00000000 00000000 dead4ead ffffffff
Call Trace:
 [<c0644e52>] ? native_cpu_up+0x2de/0x45b
 [<c064468d>] ? do_fork_idle+0x0/0x19
 [<c0645c5e>] ? _cpu_up+0x88/0xe8
 [<c0645d20>] ? cpu_up+0x42/0x4e
 [<c07e7462>] ? kernel_init+0x99/0x14b
 [<c07e73c9>] ? kernel_init+0x0/0x14b
 [<c040375f>] ? kernel_thread_helper+0x7/0x10
Code:  Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 006a:ef04cf1c

I think we should call generic_apic_probe unconditionally for 32 bit now.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 8d8fa992c9a..150e6d0a3b4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -936,7 +936,7 @@ void __init setup_arch(char **cmdline_p)
 	map_vsyscall();
 #endif
 
-#if defined(CONFIG_X86_32_NON_STANDARD) || defined(CONFIG_X86_BIGSMP)
+#ifdef CONFIG_X86_32
 	generic_apic_probe();
 #endif
 
-- 
cgit v1.2.3


From 160d8dac12932ad6eb4a359b66521e2e3282ea7d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 11 Feb 2009 11:27:39 +0100
Subject: x86, apic: make generic_apic_probe() generally available

Impact: build fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h | 6 ++++++
 arch/x86/kernel/setup.c     | 2 --
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f4835a1be36..fba49f66228 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -33,7 +33,13 @@
 	} while (0)
 
 
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 extern void generic_apic_probe(void);
+#else
+static inline void generic_apic_probe(void)
+{
+}
+#endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 150e6d0a3b4..8fce6c71451 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -936,9 +936,7 @@ void __init setup_arch(char **cmdline_p)
 	map_vsyscall();
 #endif
 
-#ifdef CONFIG_X86_32
 	generic_apic_probe();
-#endif
 
 	early_quirks();
 
-- 
cgit v1.2.3


From 5c79d2a517a9905599d192db8ce77ab5f1a2faca Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 11 Feb 2009 16:31:00 +0900
Subject: x86: fix x86_32 stack protector bugs

Impact: fix x86_32 stack protector

Brian Gerst found out that %gs was being initialized to stack_canary
instead of stack_canary - 20, which basically gave the same canary
value for all threads.  Fixing this also exposed the following bugs.

* cpu_idle() didn't call boot_init_stack_canary()

* stack canary switching in switch_to() was being done too late making
  the initial run of a new thread use the old stack canary value.

Fix all of them and while at it update comment in cpu_idle() about
calling boot_init_stack_canary().

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/stackprotector.h |  2 +-
 arch/x86/include/asm/system.h         |  8 +++-----
 arch/x86/kernel/head_32.S             |  1 +
 arch/x86/kernel/process_32.c          | 10 ++++++++++
 arch/x86/kernel/process_64.c          | 11 +++++------
 5 files changed, 20 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index fa7e5bd6fbe..c2d742c6e15 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -85,7 +85,7 @@ static __always_inline void boot_init_stack_canary(void)
 static inline void setup_stack_canary_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
-	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
+	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu) - 20;
 	struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
 	struct desc_struct desc;
 
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 2692ee8ef03..7a80f72bec4 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -25,13 +25,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #ifdef CONFIG_CC_STACKPROTECTOR
 #define __switch_canary							\
-	"movl "__percpu_arg([current_task])",%%ebx\n\t"			\
-	"movl %P[task_canary](%%ebx),%%ebx\n\t"				\
-	"movl %%ebx,"__percpu_arg([stack_canary])"\n\t"
+	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
+	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
 #define __switch_canary_oparam						\
 	, [stack_canary] "=m" (per_cpu_var(stack_canary))
 #define __switch_canary_iparam						\
-	, [current_task] "m" (per_cpu_var(current_task))		\
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
 #else	/* CC_STACKPROTECTOR */
 #define __switch_canary
@@ -60,9 +58,9 @@ do {									\
 		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
 		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
 		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
+		     __switch_canary					\
 		     "jmp __switch_to\n"	/* regparm call  */	\
 		     "1:\t"						\
-		     __switch_canary					\
 		     "popl %%ebp\n\t"		/* restore EBP   */	\
 		     "popfl\n"			/* restore flags */	\
 									\
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 924e31615fb..cf21fd0cf6a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -447,6 +447,7 @@ is386:	movl $2,%ecx		# set MP
 	jne 1f
 	movl $per_cpu__gdt_page,%eax
 	movl $per_cpu__stack_canary,%ecx
+	subl $20, %ecx
 	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
 	shrl $16, %ecx
 	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 9a62383e7c3..b50604bb1e4 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -11,6 +11,7 @@
 
 #include <stdarg.h>
 
+#include <linux/stackprotector.h>
 #include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
@@ -91,6 +92,15 @@ void cpu_idle(void)
 {
 	int cpu = smp_processor_id();
 
+	/*
+	 * If we're the non-boot CPU, nothing set the stack canary up
+	 * for us.  CPU0 already has it initialized but no harm in
+	 * doing it again.  This is a good place for updating it, as
+	 * we wont ever return from this function (so the invalid
+	 * canaries already on the stack wont ever trigger).
+	 */
+	boot_init_stack_canary();
+
 	current_thread_info()->status |= TS_POLLING;
 
 	/* endless idle loop with no priority at all */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 8eb169e4558..836ef6575f0 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -120,12 +120,11 @@ void cpu_idle(void)
 	current_thread_info()->status |= TS_POLLING;
 
 	/*
-	 * If we're the non-boot CPU, nothing set the PDA stack
-	 * canary up for us - and if we are the boot CPU we have
-	 * a 0 stack canary. This is a good place for updating
-	 * it, as we wont ever return from this function (so the
-	 * invalid canaries already on the stack wont ever
-	 * trigger):
+	 * If we're the non-boot CPU, nothing set the stack canary up
+	 * for us.  CPU0 already has it initialized but no harm in
+	 * doing it again.  This is a good place for updating it, as
+	 * we wont ever return from this function (so the invalid
+	 * canaries already on the stack wont ever trigger).
 	 */
 	boot_init_stack_canary();
 
-- 
cgit v1.2.3


From aa78bcfa01dec3cdbde3cda098ce32abbd9c3bf6 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 10 Feb 2009 09:51:45 -0500
Subject: x86: use pt_regs pointer in do_device_not_available()

The generic exception handler (error_code) passes in the pt_regs
pointer and the error code (unused in this case).  The commit
"x86: fix math_emu register frame access" changed this to pass by
value, which doesn't work correctly with stack protector enabled.
Change it back to use the pt_regs pointer.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/traps.h | 2 +-
 arch/x86/kernel/traps.c      | 9 +++++----
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index cf3bb053da0..0d5342515b8 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -41,7 +41,7 @@ dotraplinkage void do_int3(struct pt_regs *, long);
 dotraplinkage void do_overflow(struct pt_regs *, long);
 dotraplinkage void do_bounds(struct pt_regs *, long);
 dotraplinkage void do_invalid_op(struct pt_regs *, long);
-dotraplinkage void do_device_not_available(struct pt_regs);
+dotraplinkage void do_device_not_available(struct pt_regs *, long);
 dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
 dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
 dotraplinkage void do_segment_not_present(struct pt_regs *, long);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 3b7b2e19020..71a8f871331 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -905,19 +905,20 @@ void math_emulate(struct math_emu_info *info)
 }
 #endif /* CONFIG_MATH_EMULATION */
 
-dotraplinkage void __kprobes do_device_not_available(struct pt_regs regs)
+dotraplinkage void __kprobes
+do_device_not_available(struct pt_regs *regs, long error_code)
 {
 #ifdef CONFIG_X86_32
 	if (read_cr0() & X86_CR0_EM) {
 		struct math_emu_info info = { };
 
-		conditional_sti(&regs);
+		conditional_sti(regs);
 
-		info.regs = &regs;
+		info.regs = regs;
 		math_emulate(&info);
 	} else {
 		math_state_restore(); /* interrupts still off */
-		conditional_sti(&regs);
+		conditional_sti(regs);
 	}
 #else
 	math_state_restore();
-- 
cgit v1.2.3


From 253f29a4ae9cc6cdc7b94f96517f27a93885a6ce Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 10 Feb 2009 09:51:46 -0500
Subject: x86: pass in pt_regs pointer for syscalls that need it

Some syscalls need to access the pt_regs structure, either to copy
user register state or to modifiy it.  This patch adds stubs to load
the address of the pt_regs struct into the %eax register, and changes
the syscalls to regparm(1) to receive the pt_regs pointer as the
first argument.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/linkage.h     |  7 +++++++
 arch/x86/include/asm/syscalls.h    | 25 +++++++++++++++----------
 arch/x86/kernel/entry_32.S         | 20 ++++++++++++++++++++
 arch/x86/kernel/ioport.c           |  4 +---
 arch/x86/kernel/process_32.c       | 35 ++++++++++++++---------------------
 arch/x86/kernel/signal.c           | 35 +++++++----------------------------
 arch/x86/kernel/syscall_table_32.S | 20 ++++++++++----------
 arch/x86/kernel/vm86_32.c          | 15 +++++++--------
 8 files changed, 81 insertions(+), 80 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index 5d98d0b68ff..2fd5926fb97 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -17,6 +17,13 @@
  */
 #define asmregparm __attribute__((regparm(3)))
 
+/*
+ * For syscalls that need a pointer to the pt_regs struct (ie. fork).
+ * The regs pointer is passed in %eax as the first argument.  The
+ * remaining function arguments remain on the stack.
+ */
+#define ptregscall __attribute__((regparm(1)))
+
 /*
  * Make sure the compiler doesn't do anything stupid with the
  * arguments on the stack - they are owned by the *caller*, not
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index c0b0bda754e..617295255a1 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -29,21 +29,26 @@ asmlinkage int sys_get_thread_area(struct user_desc __user *);
 /* X86_32 only */
 #ifdef CONFIG_X86_32
 /* kernel/process_32.c */
-asmlinkage int sys_fork(struct pt_regs);
-asmlinkage int sys_clone(struct pt_regs);
-asmlinkage int sys_vfork(struct pt_regs);
-asmlinkage int sys_execve(struct pt_regs);
+ptregscall int sys_fork(struct pt_regs *);
+ptregscall int sys_clone(struct pt_regs *, unsigned long,
+			 unsigned long, int __user *,
+			 unsigned long, int __user *);
+ptregscall int sys_vfork(struct pt_regs *);
+ptregscall int sys_execve(struct pt_regs *, char __user *,
+			  char __user * __user *,
+			  char __user * __user *);
 
 /* kernel/signal_32.c */
 asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
 asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
-asmlinkage int sys_sigaltstack(unsigned long);
-asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(unsigned long);
+ptregscall int sys_sigaltstack(struct pt_regs *, const stack_t __user *,
+			       stack_t __user *);
+ptregscall unsigned long sys_sigreturn(struct pt_regs *);
+ptregscall int sys_rt_sigreturn(struct pt_regs *);
 
 /* kernel/ioport.c */
-asmlinkage long sys_iopl(unsigned long);
+ptregscall long sys_iopl(struct pt_regs *, unsigned int);
 
 /* kernel/sys_i386_32.c */
 asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
@@ -59,8 +64,8 @@ struct oldold_utsname;
 asmlinkage int sys_olduname(struct oldold_utsname __user *);
 
 /* kernel/vm86_32.c */
-asmlinkage int sys_vm86old(struct pt_regs);
-asmlinkage int sys_vm86(struct pt_regs);
+ptregscall int sys_vm86old(struct pt_regs *, struct vm86_struct __user *);
+ptregscall int sys_vm86(struct pt_regs *, unsigned long, unsigned long);
 
 #else /* CONFIG_X86_32 */
 
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 5f5bd22adcd..3de7b5710dc 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -697,6 +697,26 @@ syscall_badsys:
 END(syscall_badsys)
 	CFI_ENDPROC
 
+/*
+ * System calls that need a pt_regs pointer.
+ */
+#define PTREGSCALL(name) \
+	ALIGN; \
+ptregs_##name: \
+	leal 4(%esp),%eax; \
+	jmp sys_##name;
+
+PTREGSCALL(iopl)
+PTREGSCALL(fork)
+PTREGSCALL(clone)
+PTREGSCALL(vfork)
+PTREGSCALL(execve)
+PTREGSCALL(sigaltstack)
+PTREGSCALL(sigreturn)
+PTREGSCALL(rt_sigreturn)
+PTREGSCALL(vm86)
+PTREGSCALL(vm86old)
+
 .macro FIXUP_ESPFIX_STACK
 	/* since we are on a wrong stack, we cant make it a C code :( */
 	PER_CPU(gdt_page, %ebx)
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index b12208f4dfe..7ec14864631 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -131,10 +131,8 @@ static int do_iopl(unsigned int level, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage long sys_iopl(unsigned long regsp)
+ptregscall long sys_iopl(struct pt_regs *regs, unsigned int level)
 {
-	struct pt_regs *regs = (struct pt_regs *)&regsp;
-	unsigned int level = regs->bx;
 	struct thread_struct *t = &current->thread;
 	int rc;
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index b50604bb1e4..5a9dcfb01f7 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -603,24 +603,18 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	return prev_p;
 }
 
-asmlinkage int sys_fork(struct pt_regs regs)
+ptregscall int sys_fork(struct pt_regs *regs)
 {
-	return do_fork(SIGCHLD, regs.sp, &regs, 0, NULL, NULL);
+	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_clone(struct pt_regs regs)
+ptregscall int sys_clone(struct pt_regs *regs, unsigned long clone_flags,
+			 unsigned long newsp, int __user *parent_tidptr,
+			 unsigned long unused, int __user *child_tidptr)
 {
-	unsigned long clone_flags;
-	unsigned long newsp;
-	int __user *parent_tidptr, *child_tidptr;
-
-	clone_flags = regs.bx;
-	newsp = regs.cx;
-	parent_tidptr = (int __user *)regs.dx;
-	child_tidptr = (int __user *)regs.di;
 	if (!newsp)
-		newsp = regs.sp;
-	return do_fork(clone_flags, newsp, &regs, 0, parent_tidptr, child_tidptr);
+		newsp = regs->sp;
+	return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
 }
 
 /*
@@ -633,27 +627,26 @@ asmlinkage int sys_clone(struct pt_regs regs)
  * do not have enough call-clobbered registers to hold all
  * the information you need.
  */
-asmlinkage int sys_vfork(struct pt_regs regs)
+ptregscall int sys_vfork(struct pt_regs *regs)
 {
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.sp, &regs, 0, NULL, NULL);
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0, NULL, NULL);
 }
 
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage int sys_execve(struct pt_regs regs)
+ptregscall int sys_execve(struct pt_regs *regs, char __user *u_filename,
+			  char __user * __user *argv,
+			  char __user * __user *envp)
 {
 	int error;
 	char *filename;
 
-	filename = getname((char __user *) regs.bx);
+	filename = getname(u_filename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename,
-			(char __user * __user *) regs.cx,
-			(char __user * __user *) regs.dx,
-			&regs);
+	error = do_execve(filename, argv, envp, regs);
 	if (error == 0) {
 		/* Make sure we don't return using sysenter.. */
 		set_thread_flag(TIF_IRET);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 8562387c75a..d7a158367e3 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -549,39 +549,28 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 #endif /* CONFIG_X86_32 */
 
 #ifdef CONFIG_X86_32
-asmlinkage int sys_sigaltstack(unsigned long bx)
-{
-	/*
-	 * This is needed to make gcc realize it doesn't own the
-	 * "struct pt_regs"
-	 */
-	struct pt_regs *regs = (struct pt_regs *)&bx;
-	const stack_t __user *uss = (const stack_t __user *)bx;
-	stack_t __user *uoss = (stack_t __user *)regs->cx;
-
-	return do_sigaltstack(uss, uoss, regs->sp);
-}
+ptregscall int
+sys_sigaltstack(struct pt_regs *regs, const stack_t __user *uss,
+		stack_t __user *uoss)
 #else /* !CONFIG_X86_32 */
 asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
+#endif /* CONFIG_X86_32 */
 {
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
-#endif /* CONFIG_X86_32 */
 
 /*
  * Do a signal return; undo the signal stack.
  */
 #ifdef CONFIG_X86_32
-asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
+ptregscall unsigned long sys_sigreturn(struct pt_regs *regs)
 {
 	struct sigframe __user *frame;
-	struct pt_regs *regs;
 	unsigned long ax;
 	sigset_t set;
 
-	regs = (struct pt_regs *) &__unused;
 	frame = (struct sigframe __user *)(regs->sp - 8);
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -640,23 +629,13 @@ badframe:
 }
 
 #ifdef CONFIG_X86_32
-/*
- * Note: do not pass in pt_regs directly as with tail-call optimization
- * GCC will incorrectly stomp on the caller's frame and corrupt user-space
- * register state:
- */
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
-{
-	struct pt_regs *regs = (struct pt_regs *)&__unused;
-
-	return do_rt_sigreturn(regs);
-}
+ptregscall int sys_rt_sigreturn(struct pt_regs *regs)
 #else /* !CONFIG_X86_32 */
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+#endif /* CONFIG_X86_32 */
 {
 	return do_rt_sigreturn(regs);
 }
-#endif /* CONFIG_X86_32 */
 
 /*
  * OK, we're invoking a handler:
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index e2e86a08f31..3bdb64829b8 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -1,7 +1,7 @@
 ENTRY(sys_call_table)
 	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
 	.long sys_exit
-	.long sys_fork
+	.long ptregs_fork
 	.long sys_read
 	.long sys_write
 	.long sys_open		/* 5 */
@@ -10,7 +10,7 @@ ENTRY(sys_call_table)
 	.long sys_creat
 	.long sys_link
 	.long sys_unlink	/* 10 */
-	.long sys_execve
+	.long ptregs_execve
 	.long sys_chdir
 	.long sys_time
 	.long sys_mknod
@@ -109,17 +109,17 @@ ENTRY(sys_call_table)
 	.long sys_newlstat
 	.long sys_newfstat
 	.long sys_uname
-	.long sys_iopl		/* 110 */
+	.long ptregs_iopl	/* 110 */
 	.long sys_vhangup
 	.long sys_ni_syscall	/* old "idle" system call */
-	.long sys_vm86old
+	.long ptregs_vm86old
 	.long sys_wait4
 	.long sys_swapoff	/* 115 */
 	.long sys_sysinfo
 	.long sys_ipc
 	.long sys_fsync
-	.long sys_sigreturn
-	.long sys_clone		/* 120 */
+	.long ptregs_sigreturn
+	.long ptregs_clone	/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
 	.long sys_modify_ldt
@@ -165,14 +165,14 @@ ENTRY(sys_call_table)
 	.long sys_mremap
 	.long sys_setresuid16
 	.long sys_getresuid16	/* 165 */
-	.long sys_vm86
+	.long ptregs_vm86
 	.long sys_ni_syscall	/* Old sys_query_module */
 	.long sys_poll
 	.long sys_nfsservctl
 	.long sys_setresgid16	/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl
-	.long sys_rt_sigreturn
+	.long ptregs_rt_sigreturn
 	.long sys_rt_sigaction
 	.long sys_rt_sigprocmask	/* 175 */
 	.long sys_rt_sigpending
@@ -185,11 +185,11 @@ ENTRY(sys_call_table)
 	.long sys_getcwd
 	.long sys_capget
 	.long sys_capset	/* 185 */
-	.long sys_sigaltstack
+	.long ptregs_sigaltstack
 	.long sys_sendfile
 	.long sys_ni_syscall	/* reserved for streams1 */
 	.long sys_ni_syscall	/* reserved for streams2 */
-	.long sys_vfork		/* 190 */
+	.long ptregs_vfork	/* 190 */
 	.long sys_getrlimit
 	.long sys_mmap2
 	.long sys_truncate64
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 55ea30d2a3d..8fa6ba7c923 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -197,9 +197,8 @@ out:
 static int do_vm86_irq_handling(int subfunction, int irqnumber);
 static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk);
 
-asmlinkage int sys_vm86old(struct pt_regs regs)
+ptregscall int sys_vm86old(struct pt_regs *regs, struct vm86_struct __user *v86)
 {
-	struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs.bx;
 	struct kernel_vm86_struct info; /* declare this _on top_,
 					 * this avoids wasting of stack space.
 					 * This remains on the stack until we
@@ -218,7 +217,7 @@ asmlinkage int sys_vm86old(struct pt_regs regs)
 	if (tmp)
 		goto out;
 	memset(&info.vm86plus, 0, (int)&info.regs32 - (int)&info.vm86plus);
-	info.regs32 = &regs;
+	info.regs32 = regs;
 	tsk->thread.vm86_info = v86;
 	do_sys_vm86(&info, tsk);
 	ret = 0;	/* we never return here */
@@ -227,7 +226,7 @@ out:
 }
 
 
-asmlinkage int sys_vm86(struct pt_regs regs)
+ptregscall int sys_vm86(struct pt_regs *regs, unsigned long cmd, unsigned long arg)
 {
 	struct kernel_vm86_struct info; /* declare this _on top_,
 					 * this avoids wasting of stack space.
@@ -239,12 +238,12 @@ asmlinkage int sys_vm86(struct pt_regs regs)
 	struct vm86plus_struct __user *v86;
 
 	tsk = current;
-	switch (regs.bx) {
+	switch (cmd) {
 	case VM86_REQUEST_IRQ:
 	case VM86_FREE_IRQ:
 	case VM86_GET_IRQ_BITS:
 	case VM86_GET_AND_RESET_IRQ:
-		ret = do_vm86_irq_handling(regs.bx, (int)regs.cx);
+		ret = do_vm86_irq_handling(cmd, (int)arg);
 		goto out;
 	case VM86_PLUS_INSTALL_CHECK:
 		/*
@@ -261,14 +260,14 @@ asmlinkage int sys_vm86(struct pt_regs regs)
 	ret = -EPERM;
 	if (tsk->thread.saved_sp0)
 		goto out;
-	v86 = (struct vm86plus_struct __user *)regs.cx;
+	v86 = (struct vm86plus_struct __user *)arg;
 	tmp = copy_vm86_regs_from_user(&info.regs, &v86->regs,
 				       offsetof(struct kernel_vm86_struct, regs32) -
 				       sizeof(info.regs));
 	ret = -EFAULT;
 	if (tmp)
 		goto out;
-	info.regs32 = &regs;
+	info.regs32 = regs;
 	info.vm86plus.is_vm86pus = 1;
 	tsk->thread.vm86_info = (struct vm86_struct __user *)v86;
 	do_sys_vm86(&info, tsk);
-- 
cgit v1.2.3


From 9c8bb6b534d1c89a20bf9bb45e1471cf8f4747c0 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Tue, 10 Feb 2009 09:51:47 -0500
Subject: x86: drop -fno-stack-protector annotations after pt_regs fixes

Now that no functions rely on struct pt_regs being passed by value,
various "no stack protector" annotations can be dropped.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile | 18 ------------------
 1 file changed, 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index b1f8be33300..37fa30bada1 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -24,24 +24,6 @@ CFLAGS_vsyscall_64.o	:= $(PROFILING) -g0 $(nostackp)
 CFLAGS_hpet.o		:= $(nostackp)
 CFLAGS_tsc.o		:= $(nostackp)
 CFLAGS_paravirt.o	:= $(nostackp)
-#
-# On x86_32, register frame is passed verbatim on stack as struct
-# pt_regs.  gcc considers the parameter to belong to the callee and
-# with -fstack-protector it copies pt_regs to the callee's stack frame
-# to put the structure after the stack canary causing changes made by
-# the exception handlers to be lost.  Turn off stack protector for all
-# files containing functions which take struct pt_regs from register
-# frame.
-#
-# The proper way to fix this is to teach gcc that the argument belongs
-# to the caller for these functions, oh well...
-#
-ifdef CONFIG_X86_32
-CFLAGS_process_32.o	:= $(nostackp)
-CFLAGS_vm86_32.o	:= $(nostackp)
-CFLAGS_signal.o		:= $(nostackp)
-CFLAGS_traps.o		:= $(nostackp)
-endif
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
-- 
cgit v1.2.3


From 1c0040047d5499599cc231ca3f105be3ceff8562 Mon Sep 17 00:00:00 2001
From: Dean Nelson <dcn@sgi.com>
Date: Mon, 9 Feb 2009 10:25:20 -0600
Subject: SGI IA64 UV: fix ia64 build error in the linux-next tree

Fix the ia64 build error that occurs in the linux-next tree by introducing
an ia64 version of uv.h.

Additionally, clean up the usage of is_uv_system().

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/uv/uv.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 arch/ia64/include/asm/uv/uv.h

(limited to 'arch')

diff --git a/arch/ia64/include/asm/uv/uv.h b/arch/ia64/include/asm/uv/uv.h
new file mode 100644
index 00000000000..61b5bdfd980
--- /dev/null
+++ b/arch/ia64/include/asm/uv/uv.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_IA64_UV_UV_H
+#define _ASM_IA64_UV_UV_H
+
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+
+static inline int is_uv_system(void)
+{
+	/* temporary support for running on hardware simulator */
+	return IS_MEDUSA() || ia64_platform_is("uv");
+}
+
+#endif	/* _ASM_IA64_UV_UV_H */
-- 
cgit v1.2.3


From c5c606d9dce6e0852a401c57a8b0542acdbb6796 Mon Sep 17 00:00:00 2001
From: Ravikiran G Thirumalai <kiran@scalex86.org>
Date: Mon, 9 Feb 2009 18:18:14 -0800
Subject: x86: cleanup, rename CONFIG_X86_NON_STANDARD to
 CONFIG_X86_EXTENDED_PLATFORM

Patch to rename the CONFIG_X86_NON_STANDARD to CONFIG_X86_EXTENDED_PLATFORM.

The new name represents the subarches better. Also, default this to 'y'
so that many of the sub architectures that were not easily visible now
become visible.

Also re-organize the extended architecture platform and non standard
platform list alphabetically as suggested by Ingo.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 83 +++++++++++++++++++++++++++++++-------------------------
 1 file changed, 46 insertions(+), 37 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 270ecf90bdb..4a27aa41f6d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -268,65 +268,48 @@ config X86_BIGSMP
 	---help---
 	  This option is needed for the systems that have more than 8 CPUs
 
-config X86_NON_STANDARD
-	bool "Support for non-standard x86 platforms"
+config X86_EXTENDED_PLATFORM
+	bool "Support for extended (non-PC) x86 platforms"
+	default y
 	---help---
 	  If you disable this option then the kernel will only support
 	  standard PC platforms. (which covers the vast majority of
 	  systems out there.)
 
 	  If you enable this option then you'll be able to select a number
-	  of less common non-PC x86 platforms: VisWS, RDC321, SGI/UV.
+	  of non-PC x86 platforms.
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
 
-config X86_VISWS
-	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
-	depends on X86_NON_STANDARD
-	---help---
-	  The SGI Visual Workstation series is an IA32-based workstation
-	  based on SGI systems chips with some legacy PC hardware attached.
+# This is an alphabetically sorted list of 64 bit extended platforms
+# Please maintain the alphabetic order if and when there are additions
 
-	  Say Y here to create a kernel to run on the SGI 320 or 540.
-
-	  A kernel compiled for the Visual Workstation will run on general
-	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
-
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	depends on X86_NON_STANDARD
-	select M486
-	select X86_REBOOTFIXUPS
+config X86_VSMP
+	bool "ScaleMP vSMP"
+	select PARAVIRT
+	depends on X86_64 && PCI
+	depends on X86_EXTENDED_PLATFORM
 	---help---
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
+	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
+	  supposed to run on these EM64T-based machines.  Only choose this option
+	  if you have one of these machines.
 
 config X86_UV
 	bool "SGI Ultraviolet"
 	depends on X86_64
-	depends on X86_NON_STANDARD
+	depends on X86_EXTENDED_PLATFORM
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
 
-config X86_VSMP
-	bool "Support for ScaleMP vSMP"
-	select PARAVIRT
-	depends on X86_64 && PCI
-	depends on X86_NON_STANDARD
-	---help---
-	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
-	  supposed to run on these EM64T-based machines.  Only choose this option
-	  if you have one of these machines.
+# Following is an alphabetically sorted list of 32 bit extended platforms
+# Please maintain the alphabetic order if and when there are additions
 
 config X86_ELAN
 	bool "AMD Elan"
 	depends on X86_32
-	depends on X86_NON_STANDARD
+	depends on X86_EXTENDED_PLATFORM
 	---help---
 	  Select this for an AMD Elan processor.
 
@@ -334,16 +317,29 @@ config X86_ELAN
 
 	  If unsure, choose "PC-compatible" instead.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	depends on X86_EXTENDED_PLATFORM
+	select M486
+	select X86_REBOOTFIXUPS
+	---help---
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
 config X86_32_NON_STANDARD
 	bool "Support non-standard 32-bit SMP architectures"
 	depends on X86_32 && SMP
-	depends on X86_NON_STANDARD
+	depends on X86_EXTENDED_PLATFORM
 	---help---
 	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
 	  subarchitectures.  It is intended for a generic binary kernel.
 	  if you select them all, kernel will probe it one by one. and will
 	  fallback to default.
 
+# Alphabetically sorted list of Non standard 32 bit platforms
+
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
 	depends on X86_32_NON_STANDARD
@@ -356,6 +352,19 @@ config X86_NUMAQ
 	  of Flat Logical.  You will need a new lynxer.elf file to flash your
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
+config X86_VISWS
+	bool "SGI 320/540 (Visual Workstation)"
+	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
+	depends on X86_32_NON_STANDARD
+	---help---
+	  The SGI Visual Workstation series is an IA32-based workstation
+	  based on SGI systems chips with some legacy PC hardware attached.
+
+	  Say Y here to create a kernel to run on the SGI 320 or 540.
+
+	  A kernel compiled for the Visual Workstation will run on general
+	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
+
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
 	depends on X86_32_NON_STANDARD
@@ -364,7 +373,7 @@ config X86_SUMMIT
 	  In particular, it is needed for the x440.
 
 config X86_ES7000
-	bool "Support for Unisys ES7000 IA32 series"
+	bool "Unisys ES7000 IA32 series"
 	depends on X86_32_NON_STANDARD && X86_BIGSMP
 	---help---
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
-- 
cgit v1.2.3


From 17993b49b1f540aace8e9b4242530d0b3376eb2a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 11 Feb 2009 17:20:51 +0100
Subject: x86: make hibernation always-possible

This commit:

  aced3ce: x86/Voyager: remove HIBERNATION Kconfig quirk

Made hibernation only available on UP - instead of making it available
on all of x86. Fix it.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4a27aa41f6d..148c112c9ca 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -140,7 +140,6 @@ config HAVE_CPUMASK_OF_CPU_MAP
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on !SMP
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-- 
cgit v1.2.3


From 7651194fb715b2d57658c05a710408f6b8448951 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Wed, 11 Feb 2009 22:26:52 +0530
Subject: x86: mm/init_32.c fix compilation warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

 arch/x86/mm/init_32.c: In function ‘find_low_pfn_range’:
 arch/x86/mm/init_32.c:696: warning: format ‘%u’ expects type ‘unsigned int’, but

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 2cef0507441..d48f2560364 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -692,7 +692,7 @@ void __init find_low_pfn_range(void)
 			max_pfn = MAXMEM_PFN + highmem_pages;
 		if (highmem_pages + MAXMEM_PFN > max_pfn) {
 			printk(KERN_WARNING "only %luMB highmem pages "
-				"available, ignoring highmem size of %uMB.\n",
+				"available, ignoring highmem size of %luMB.\n",
 				pages_to_mb(max_pfn - MAXMEM_PFN),
 				pages_to_mb(highmem_pages));
 			highmem_pages = 0;
-- 
cgit v1.2.3


From ba1511bf7fbda452138e4096bf10d5a382710f4f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Wed, 11 Feb 2009 23:38:25 +0530
Subject: x86: kernel/mpparse.c fix compilation warnings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

 arch/x86/kernel/mpparse.c: In function ‘smp_scan_config’:
 arch/x86/kernel/mpparse.c:696: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 3 has type ‘phys_addr_t’
 arch/x86/kernel/mpparse.c: In function ‘update_mp_table’:
 arch/x86/kernel/mpparse.c:1014: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘phys_addr_t’

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/mpparse.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 66ebb823f39..20076445319 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -692,8 +692,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 #endif
 			mpf_found = mpf;
 
-			printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
-			       mpf, virt_to_phys(mpf));
+			printk(KERN_INFO "found SMP MP-table at [%p] %llx\n",
+			       mpf, (u64)virt_to_phys(mpf));
 
 			if (!reserve)
 				return 1;
@@ -1011,7 +1011,7 @@ static int __init update_mp_table(void)
 	if (!smp_check_mpc(mpc, oem, str))
 		return 0;
 
-	printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf));
+	printk(KERN_INFO "mpf: %llx\n", (u64)virt_to_phys(mpf));
 	printk(KERN_INFO "physptr: %x\n", mpf->physptr);
 
 	if (mpc_new_phys && mpc->length > mpc_new_length) {
-- 
cgit v1.2.3


From b12bdaf11f935d7be030207e3c77faeaeab8ded3 Mon Sep 17 00:00:00 2001
From: Brian Gerst <brgerst@gmail.com>
Date: Wed, 11 Feb 2009 16:43:58 -0500
Subject: x86: use regparm(3) for passed-in pt_regs pointer

Some syscalls need to access the pt_regs structure, either to copy
user register state or to modifiy it.  This patch adds stubs to load
the address of the pt_regs struct into the %eax register, and changes
the syscalls to take the pointer as an argument instead of relying on
the assumption that the pt_regs structure overlaps the function
arguments.

Drop the use of regparm(1) due to concern about gcc bugs, and to move
in the direction of the eventual removal of regparm(0) for asmlinkage.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/linkage.h  |  7 -------
 arch/x86/include/asm/syscalls.h | 25 ++++++++++---------------
 arch/x86/kernel/ioport.c        |  3 ++-
 arch/x86/kernel/process_32.c    | 27 +++++++++++++++++----------
 arch/x86/kernel/signal.c        | 21 ++++++++++++++-------
 arch/x86/kernel/vm86_32.c       | 11 ++++++-----
 6 files changed, 49 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index 2fd5926fb97..5d98d0b68ff 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -17,13 +17,6 @@
  */
 #define asmregparm __attribute__((regparm(3)))
 
-/*
- * For syscalls that need a pointer to the pt_regs struct (ie. fork).
- * The regs pointer is passed in %eax as the first argument.  The
- * remaining function arguments remain on the stack.
- */
-#define ptregscall __attribute__((regparm(1)))
-
 /*
  * Make sure the compiler doesn't do anything stupid with the
  * arguments on the stack - they are owned by the *caller*, not
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 617295255a1..77bb31a88ba 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -29,26 +29,21 @@ asmlinkage int sys_get_thread_area(struct user_desc __user *);
 /* X86_32 only */
 #ifdef CONFIG_X86_32
 /* kernel/process_32.c */
-ptregscall int sys_fork(struct pt_regs *);
-ptregscall int sys_clone(struct pt_regs *, unsigned long,
-			 unsigned long, int __user *,
-			 unsigned long, int __user *);
-ptregscall int sys_vfork(struct pt_regs *);
-ptregscall int sys_execve(struct pt_regs *, char __user *,
-			  char __user * __user *,
-			  char __user * __user *);
+int sys_fork(struct pt_regs *);
+int sys_clone(struct pt_regs *);
+int sys_vfork(struct pt_regs *);
+int sys_execve(struct pt_regs *);
 
 /* kernel/signal_32.c */
 asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
 asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
-ptregscall int sys_sigaltstack(struct pt_regs *, const stack_t __user *,
-			       stack_t __user *);
-ptregscall unsigned long sys_sigreturn(struct pt_regs *);
-ptregscall int sys_rt_sigreturn(struct pt_regs *);
+int sys_sigaltstack(struct pt_regs *);
+unsigned long sys_sigreturn(struct pt_regs *);
+int sys_rt_sigreturn(struct pt_regs *);
 
 /* kernel/ioport.c */
-ptregscall long sys_iopl(struct pt_regs *, unsigned int);
+long sys_iopl(struct pt_regs *);
 
 /* kernel/sys_i386_32.c */
 asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
@@ -64,8 +59,8 @@ struct oldold_utsname;
 asmlinkage int sys_olduname(struct oldold_utsname __user *);
 
 /* kernel/vm86_32.c */
-ptregscall int sys_vm86old(struct pt_regs *, struct vm86_struct __user *);
-ptregscall int sys_vm86(struct pt_regs *, unsigned long, unsigned long);
+int sys_vm86old(struct pt_regs *);
+int sys_vm86(struct pt_regs *);
 
 #else /* CONFIG_X86_32 */
 
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index 7ec14864631..e41980a373a 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -131,8 +131,9 @@ static int do_iopl(unsigned int level, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_X86_32
-ptregscall long sys_iopl(struct pt_regs *regs, unsigned int level)
+long sys_iopl(struct pt_regs *regs)
 {
+	unsigned int level = regs->bx;
 	struct thread_struct *t = &current->thread;
 	int rc;
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 5a9dcfb01f7..fec79ad85dc 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -603,15 +603,21 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	return prev_p;
 }
 
-ptregscall int sys_fork(struct pt_regs *regs)
+int sys_fork(struct pt_regs *regs)
 {
 	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
 }
 
-ptregscall int sys_clone(struct pt_regs *regs, unsigned long clone_flags,
-			 unsigned long newsp, int __user *parent_tidptr,
-			 unsigned long unused, int __user *child_tidptr)
+int sys_clone(struct pt_regs *regs)
 {
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	clone_flags = regs->bx;
+	newsp = regs->cx;
+	parent_tidptr = (int __user *)regs->dx;
+	child_tidptr = (int __user *)regs->di;
 	if (!newsp)
 		newsp = regs->sp;
 	return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
@@ -627,7 +633,7 @@ ptregscall int sys_clone(struct pt_regs *regs, unsigned long clone_flags,
  * do not have enough call-clobbered registers to hold all
  * the information you need.
  */
-ptregscall int sys_vfork(struct pt_regs *regs)
+int sys_vfork(struct pt_regs *regs)
 {
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0, NULL, NULL);
 }
@@ -635,18 +641,19 @@ ptregscall int sys_vfork(struct pt_regs *regs)
 /*
  * sys_execve() executes a new program.
  */
-ptregscall int sys_execve(struct pt_regs *regs, char __user *u_filename,
-			  char __user * __user *argv,
-			  char __user * __user *envp)
+int sys_execve(struct pt_regs *regs)
 {
 	int error;
 	char *filename;
 
-	filename = getname(u_filename);
+	filename = getname((char __user *) regs->bx);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename,
+			(char __user * __user *) regs->cx,
+			(char __user * __user *) regs->dx,
+			regs);
 	if (error == 0) {
 		/* Make sure we don't return using sysenter.. */
 		set_thread_flag(TIF_IRET);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index d7a158367e3..ccfb27412f0 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -549,23 +549,27 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 #endif /* CONFIG_X86_32 */
 
 #ifdef CONFIG_X86_32
-ptregscall int
-sys_sigaltstack(struct pt_regs *regs, const stack_t __user *uss,
-		stack_t __user *uoss)
+int sys_sigaltstack(struct pt_regs *regs)
+{
+	const stack_t __user *uss = (const stack_t __user *)regs->bx;
+	stack_t __user *uoss = (stack_t __user *)regs->cx;
+
+	return do_sigaltstack(uss, uoss, regs->sp);
+}
 #else /* !CONFIG_X86_32 */
 asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
-#endif /* CONFIG_X86_32 */
 {
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
+#endif /* CONFIG_X86_32 */
 
 /*
  * Do a signal return; undo the signal stack.
  */
 #ifdef CONFIG_X86_32
-ptregscall unsigned long sys_sigreturn(struct pt_regs *regs)
+unsigned long sys_sigreturn(struct pt_regs *regs)
 {
 	struct sigframe __user *frame;
 	unsigned long ax;
@@ -629,13 +633,16 @@ badframe:
 }
 
 #ifdef CONFIG_X86_32
-ptregscall int sys_rt_sigreturn(struct pt_regs *regs)
+int sys_rt_sigreturn(struct pt_regs *regs)
+{
+	return do_rt_sigreturn(regs);
+}
 #else /* !CONFIG_X86_32 */
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-#endif /* CONFIG_X86_32 */
 {
 	return do_rt_sigreturn(regs);
 }
+#endif /* CONFIG_X86_32 */
 
 /*
  * OK, we're invoking a handler:
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 8fa6ba7c923..d7ac84e7fc1 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -197,8 +197,9 @@ out:
 static int do_vm86_irq_handling(int subfunction, int irqnumber);
 static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk);
 
-ptregscall int sys_vm86old(struct pt_regs *regs, struct vm86_struct __user *v86)
+int sys_vm86old(struct pt_regs *regs)
 {
+	struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs->bx;
 	struct kernel_vm86_struct info; /* declare this _on top_,
 					 * this avoids wasting of stack space.
 					 * This remains on the stack until we
@@ -226,7 +227,7 @@ out:
 }
 
 
-ptregscall int sys_vm86(struct pt_regs *regs, unsigned long cmd, unsigned long arg)
+int sys_vm86(struct pt_regs *regs)
 {
 	struct kernel_vm86_struct info; /* declare this _on top_,
 					 * this avoids wasting of stack space.
@@ -238,12 +239,12 @@ ptregscall int sys_vm86(struct pt_regs *regs, unsigned long cmd, unsigned long a
 	struct vm86plus_struct __user *v86;
 
 	tsk = current;
-	switch (cmd) {
+	switch (regs->bx) {
 	case VM86_REQUEST_IRQ:
 	case VM86_FREE_IRQ:
 	case VM86_GET_IRQ_BITS:
 	case VM86_GET_AND_RESET_IRQ:
-		ret = do_vm86_irq_handling(cmd, (int)arg);
+		ret = do_vm86_irq_handling(regs->bx, (int)regs->cx);
 		goto out;
 	case VM86_PLUS_INSTALL_CHECK:
 		/*
@@ -260,7 +261,7 @@ ptregscall int sys_vm86(struct pt_regs *regs, unsigned long cmd, unsigned long a
 	ret = -EPERM;
 	if (tsk->thread.saved_sp0)
 		goto out;
-	v86 = (struct vm86plus_struct __user *)arg;
+	v86 = (struct vm86plus_struct __user *)regs->cx;
 	tmp = copy_vm86_regs_from_user(&info.regs, &v86->regs,
 				       offsetof(struct kernel_vm86_struct, regs32) -
 				       sizeof(info.regs));
-- 
cgit v1.2.3


From b924a28138572f03bc8647c2be8f876d27e2666a Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 11 Feb 2009 12:08:01 -0800
Subject: x86: rename *-defs.h to *-_types.h for consistency

The kernel tends to call definition-only headers *_types.h, so rename
the x86 page/pgtable headers accordingly.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable-2level-defs.h  | 20 --------------------
 arch/x86/include/asm/pgtable-2level_types.h | 20 ++++++++++++++++++++
 arch/x86/include/asm/pgtable-3level-defs.h  | 28 ----------------------------
 arch/x86/include/asm/pgtable-3level_types.h | 28 ++++++++++++++++++++++++++++
 arch/x86/include/asm/pgtable_32.h           |  4 ++--
 5 files changed, 50 insertions(+), 50 deletions(-)
 delete mode 100644 arch/x86/include/asm/pgtable-2level-defs.h
 create mode 100644 arch/x86/include/asm/pgtable-2level_types.h
 delete mode 100644 arch/x86/include/asm/pgtable-3level-defs.h
 create mode 100644 arch/x86/include/asm/pgtable-3level_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable-2level-defs.h b/arch/x86/include/asm/pgtable-2level-defs.h
deleted file mode 100644
index d77db8990ea..00000000000
--- a/arch/x86/include/asm/pgtable-2level-defs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H
-#define _ASM_X86_PGTABLE_2LEVEL_DEFS_H
-
-#define SHARED_KERNEL_PMD	0
-
-/*
- * traditional i386 two-level paging structure:
- */
-
-#define PGDIR_SHIFT	22
-#define PTRS_PER_PGD	1024
-
-/*
- * the i386 is two-level, so we don't really have any
- * PMD directory physically.
- */
-
-#define PTRS_PER_PTE	1024
-
-#endif /* _ASM_X86_PGTABLE_2LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-2level_types.h b/arch/x86/include/asm/pgtable-2level_types.h
new file mode 100644
index 00000000000..d77db8990ea
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-2level_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+#define _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+
+#define SHARED_KERNEL_PMD	0
+
+/*
+ * traditional i386 two-level paging structure:
+ */
+
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+/*
+ * the i386 is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+
+#define PTRS_PER_PTE	1024
+
+#endif /* _ASM_X86_PGTABLE_2LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-3level-defs.h b/arch/x86/include/asm/pgtable-3level-defs.h
deleted file mode 100644
index 62561367653..00000000000
--- a/arch/x86/include/asm/pgtable-3level-defs.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H
-#define _ASM_X86_PGTABLE_3LEVEL_DEFS_H
-
-#ifdef CONFIG_PARAVIRT
-#define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
-#else
-#define SHARED_KERNEL_PMD	1
-#endif
-
-/*
- * PGDIR_SHIFT determines what a top-level page table entry can map
- */
-#define PGDIR_SHIFT	30
-#define PTRS_PER_PGD	4
-
-/*
- * PMD_SHIFT determines the size of the area a middle-level
- * page table can map
- */
-#define PMD_SHIFT	21
-#define PTRS_PER_PMD	512
-
-/*
- * entries per page directory level
- */
-#define PTRS_PER_PTE	512
-
-#endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-3level_types.h b/arch/x86/include/asm/pgtable-3level_types.h
new file mode 100644
index 00000000000..62561367653
--- /dev/null
+++ b/arch/x86/include/asm/pgtable-3level_types.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+#define _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+
+#ifdef CONFIG_PARAVIRT
+#define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
+#else
+#define SHARED_KERNEL_PMD	1
+#endif
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	30
+#define PTRS_PER_PGD	4
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 1952bb762aa..72d20e2a40f 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -39,11 +39,11 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
  * newer 3-level PAE-mode page tables.
  */
 #ifdef CONFIG_X86_PAE
-# include <asm/pgtable-3level-defs.h>
+# include <asm/pgtable-3level_types.h>
 # define PMD_SIZE	(1UL << PMD_SHIFT)
 # define PMD_MASK	(~(PMD_SIZE - 1))
 #else
-# include <asm/pgtable-2level-defs.h>
+# include <asm/pgtable-2level_types.h>
 #endif
 
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-- 
cgit v1.2.3


From 8d19c99faf6165ef095138dd595d46b9bbb34055 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 18:46:18 -0800
Subject: Split pgtable.h into pgtable_types.h and pgtable.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/pgtable.h       | 212 +--------------------------------
 arch/x86/include/asm/pgtable_types.h | 220 +++++++++++++++++++++++++++++++++++
 2 files changed, 221 insertions(+), 211 deletions(-)
 create mode 100644 arch/x86/include/asm/pgtable_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 860f1b635c4..10404e7bf32 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -3,164 +3,7 @@
 
 #include <asm/page.h>
 
-#define FIRST_USER_ADDRESS	0
-
-#define _PAGE_BIT_PRESENT	0	/* is present */
-#define _PAGE_BIT_RW		1	/* writeable */
-#define _PAGE_BIT_USER		2	/* userspace addressable */
-#define _PAGE_BIT_PWT		3	/* page write through */
-#define _PAGE_BIT_PCD		4	/* page cache disabled */
-#define _PAGE_BIT_ACCESSED	5	/* was accessed (raised by CPU) */
-#define _PAGE_BIT_DIRTY		6	/* was written to (raised by CPU) */
-#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page */
-#define _PAGE_BIT_PAT		7	/* on 4KB pages */
-#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
-#define _PAGE_BIT_UNUSED1	9	/* available for programmer */
-#define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
-#define _PAGE_BIT_UNUSED3	11
-#define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
-#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
-#define _PAGE_BIT_CPA_TEST	_PAGE_BIT_UNUSED1
-#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
-
-/* If _PAGE_BIT_PRESENT is clear, we use these: */
-/* - if the user mapped it with PROT_NONE; pte_present gives true */
-#define _PAGE_BIT_PROTNONE	_PAGE_BIT_GLOBAL
-/* - set: nonlinear file mapping, saved PTE; unset:swap */
-#define _PAGE_BIT_FILE		_PAGE_BIT_DIRTY
-
-#define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
-#define _PAGE_RW	(_AT(pteval_t, 1) << _PAGE_BIT_RW)
-#define _PAGE_USER	(_AT(pteval_t, 1) << _PAGE_BIT_USER)
-#define _PAGE_PWT	(_AT(pteval_t, 1) << _PAGE_BIT_PWT)
-#define _PAGE_PCD	(_AT(pteval_t, 1) << _PAGE_BIT_PCD)
-#define _PAGE_ACCESSED	(_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
-#define _PAGE_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
-#define _PAGE_PSE	(_AT(pteval_t, 1) << _PAGE_BIT_PSE)
-#define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
-#define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
-#define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
-#define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
-#define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
-#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
-#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
-#define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
-#define __HAVE_ARCH_PTE_SPECIAL
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-#define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
-#else
-#define _PAGE_NX	(_AT(pteval_t, 0))
-#endif
-
-#define _PAGE_FILE	(_AT(pteval_t, 1) << _PAGE_BIT_FILE)
-#define _PAGE_PROTNONE	(_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE)
-
-#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |	\
-			 _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED |	\
-			 _PAGE_DIRTY)
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-#define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
-#define _PAGE_CACHE_WB		(0)
-#define _PAGE_CACHE_WC		(_PAGE_PWT)
-#define _PAGE_CACHE_UC_MINUS	(_PAGE_PCD)
-#define _PAGE_CACHE_UC		(_PAGE_PCD | _PAGE_PWT)
-
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
-				 _PAGE_ACCESSED | _PAGE_NX)
-
-#define PAGE_SHARED_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_RW |	\
-					 _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_COPY_NOEXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_COPY_EXEC		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED)
-#define PAGE_COPY		PAGE_COPY_NOEXEC
-#define PAGE_READONLY		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_READONLY_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
-					 _PAGE_ACCESSED)
-
-#define __PAGE_KERNEL_EXEC						\
-	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
-#define __PAGE_KERNEL		(__PAGE_KERNEL_EXEC | _PAGE_NX)
-
-#define __PAGE_KERNEL_RO		(__PAGE_KERNEL & ~_PAGE_RW)
-#define __PAGE_KERNEL_RX		(__PAGE_KERNEL_EXEC & ~_PAGE_RW)
-#define __PAGE_KERNEL_EXEC_NOCACHE	(__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_WC		(__PAGE_KERNEL | _PAGE_CACHE_WC)
-#define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_UC_MINUS		(__PAGE_KERNEL | _PAGE_PCD)
-#define __PAGE_KERNEL_VSYSCALL		(__PAGE_KERNEL_RX | _PAGE_USER)
-#define __PAGE_KERNEL_VSYSCALL_NOCACHE	(__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_NOCACHE	(__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
-
-#define __PAGE_KERNEL_IO		(__PAGE_KERNEL | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_NOCACHE	(__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_UC_MINUS	(__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_WC		(__PAGE_KERNEL_WC | _PAGE_IOMAP)
-
-#define PAGE_KERNEL			__pgprot(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO			__pgprot(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_EXEC		__pgprot(__PAGE_KERNEL_EXEC)
-#define PAGE_KERNEL_RX			__pgprot(__PAGE_KERNEL_RX)
-#define PAGE_KERNEL_WC			__pgprot(__PAGE_KERNEL_WC)
-#define PAGE_KERNEL_NOCACHE		__pgprot(__PAGE_KERNEL_NOCACHE)
-#define PAGE_KERNEL_UC_MINUS		__pgprot(__PAGE_KERNEL_UC_MINUS)
-#define PAGE_KERNEL_EXEC_NOCACHE	__pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
-#define PAGE_KERNEL_LARGE		__pgprot(__PAGE_KERNEL_LARGE)
-#define PAGE_KERNEL_LARGE_NOCACHE	__pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
-#define PAGE_KERNEL_LARGE_EXEC		__pgprot(__PAGE_KERNEL_LARGE_EXEC)
-#define PAGE_KERNEL_VSYSCALL		__pgprot(__PAGE_KERNEL_VSYSCALL)
-#define PAGE_KERNEL_VSYSCALL_NOCACHE	__pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
-
-#define PAGE_KERNEL_IO			__pgprot(__PAGE_KERNEL_IO)
-#define PAGE_KERNEL_IO_NOCACHE		__pgprot(__PAGE_KERNEL_IO_NOCACHE)
-#define PAGE_KERNEL_IO_UC_MINUS		__pgprot(__PAGE_KERNEL_IO_UC_MINUS)
-#define PAGE_KERNEL_IO_WC		__pgprot(__PAGE_KERNEL_IO_WC)
-
-/*         xwr */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY
-#define __P100	PAGE_READONLY_EXEC
-#define __P101	PAGE_READONLY_EXEC
-#define __P110	PAGE_COPY_EXEC
-#define __P111	PAGE_COPY_EXEC
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED
-#define __S011	PAGE_SHARED
-#define __S100	PAGE_READONLY_EXEC
-#define __S101	PAGE_READONLY_EXEC
-#define __S110	PAGE_SHARED_EXEC
-#define __S111	PAGE_SHARED_EXEC
-
-/*
- * early identity mapping  pte attrib macros.
- */
-#ifdef CONFIG_X86_64
-#define __PAGE_KERNEL_IDENT_LARGE_EXEC	__PAGE_KERNEL_LARGE_EXEC
-#else
-/*
- * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
- * bits are combined, this will alow user to access the high address mapped
- * VDSO in the presence of CONFIG_COMPAT_VDSO
- */
-#define PTE_IDENT_ATTR	 0x003		/* PRESENT+RW */
-#define PDE_IDENT_ATTR	 0x067		/* PRESENT+RW+USER+DIRTY+ACCESSED */
-#define PGD_IDENT_ATTR	 0x001		/* PRESENT (no other attributes) */
-#endif
+#include <asm/pgtable_types.h>
 
 /*
  * Macro to mark a page protection value as UC-
@@ -172,9 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-#define pgprot_writecombine	pgprot_writecombine
-extern pgprot_t pgprot_writecombine(pgprot_t prot);
-
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -316,8 +156,6 @@ static inline pte_t pte_mkspecial(pte_t pte)
 	return pte_set_flags(pte, _PAGE_SPECIAL);
 }
 
-extern pteval_t __supported_pte_mask;
-
 static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
 {
 	return __pte((((phys_addr_t)page_nr << PAGE_SHIFT) |
@@ -376,32 +214,6 @@ static inline int is_new_memtype_allowed(unsigned long flags,
 	return 1;
 }
 
-#ifndef __ASSEMBLY__
-/* Indicate that x86 has its own track and untrack pfn vma functions */
-#define __HAVE_PFNMAP_TRACKING
-
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-struct file;
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-                              unsigned long size, pgprot_t vma_prot);
-int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
-                              unsigned long size, pgprot_t *vma_prot);
-#endif
-
-/* Install a pte for a particular vaddr in kernel space. */
-void set_pte_vaddr(unsigned long vaddr, pte_t pte);
-
-#ifdef CONFIG_X86_32
-extern void native_pagetable_setup_start(pgd_t *base);
-extern void native_pagetable_setup_done(pgd_t *base);
-#else
-static inline void native_pagetable_setup_start(pgd_t *base) {}
-static inline void native_pagetable_setup_done(pgd_t *base) {}
-#endif
-
-struct seq_file;
-extern void arch_report_meminfo(struct seq_file *m);
-
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else  /* !CONFIG_PARAVIRT */
@@ -662,28 +474,6 @@ static inline int pgd_none(pgd_t pgd)
 
 #ifndef __ASSEMBLY__
 
-enum {
-	PG_LEVEL_NONE,
-	PG_LEVEL_4K,
-	PG_LEVEL_2M,
-	PG_LEVEL_1G,
-	PG_LEVEL_NUM
-};
-
-#ifdef CONFIG_PROC_FS
-extern void update_page_count(int level, unsigned long pages);
-#else
-static inline void update_page_count(int level, unsigned long pages) { }
-#endif
-
-/*
- * Helper function that returns the kernel pagetable entry controlling
- * the virtual address 'address'. NULL means no pagetable entry present.
- * NOTE: the return type is pte_t but if the pmd is PSE then we return it
- * as a pte too.
- */
-extern pte_t *lookup_address(unsigned long address, unsigned int *level);
-
 /* local pte updates need not use xchg for locking */
 static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
 {
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
new file mode 100644
index 00000000000..f80f5a66bb8
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -0,0 +1,220 @@
+#ifndef _ASM_X86_PGTABLE_DEFS_H
+#define _ASM_X86_PGTABLE_DEFS_H
+
+#include <linux/const.h>
+
+#define FIRST_USER_ADDRESS	0
+
+#define _PAGE_BIT_PRESENT	0	/* is present */
+#define _PAGE_BIT_RW		1	/* writeable */
+#define _PAGE_BIT_USER		2	/* userspace addressable */
+#define _PAGE_BIT_PWT		3	/* page write through */
+#define _PAGE_BIT_PCD		4	/* page cache disabled */
+#define _PAGE_BIT_ACCESSED	5	/* was accessed (raised by CPU) */
+#define _PAGE_BIT_DIRTY		6	/* was written to (raised by CPU) */
+#define _PAGE_BIT_PSE		7	/* 4 MB (or 2MB) page */
+#define _PAGE_BIT_PAT		7	/* on 4KB pages */
+#define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
+#define _PAGE_BIT_UNUSED1	9	/* available for programmer */
+#define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
+#define _PAGE_BIT_UNUSED3	11
+#define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
+#define _PAGE_BIT_CPA_TEST	_PAGE_BIT_UNUSED1
+#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
+
+/* If _PAGE_BIT_PRESENT is clear, we use these: */
+/* - if the user mapped it with PROT_NONE; pte_present gives true */
+#define _PAGE_BIT_PROTNONE	_PAGE_BIT_GLOBAL
+/* - set: nonlinear file mapping, saved PTE; unset:swap */
+#define _PAGE_BIT_FILE		_PAGE_BIT_DIRTY
+
+#define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
+#define _PAGE_RW	(_AT(pteval_t, 1) << _PAGE_BIT_RW)
+#define _PAGE_USER	(_AT(pteval_t, 1) << _PAGE_BIT_USER)
+#define _PAGE_PWT	(_AT(pteval_t, 1) << _PAGE_BIT_PWT)
+#define _PAGE_PCD	(_AT(pteval_t, 1) << _PAGE_BIT_PCD)
+#define _PAGE_ACCESSED	(_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
+#define _PAGE_DIRTY	(_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
+#define _PAGE_PSE	(_AT(pteval_t, 1) << _PAGE_BIT_PSE)
+#define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
+#define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
+#define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
+#define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
+#define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
+#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+#define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
+#else
+#define _PAGE_NX	(_AT(pteval_t, 0))
+#endif
+
+#define _PAGE_FILE	(_AT(pteval_t, 1) << _PAGE_BIT_FILE)
+#define _PAGE_PROTNONE	(_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE)
+
+#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER |	\
+			 _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED |	\
+			 _PAGE_DIRTY)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
+#define _PAGE_CACHE_WB		(0)
+#define _PAGE_CACHE_WC		(_PAGE_PWT)
+#define _PAGE_CACHE_UC_MINUS	(_PAGE_PCD)
+#define _PAGE_CACHE_UC		(_PAGE_PCD | _PAGE_PWT)
+
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_ACCESSED | _PAGE_NX)
+
+#define PAGE_SHARED_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_RW |	\
+					 _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY_EXEC		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED)
+#define PAGE_COPY		PAGE_COPY_NOEXEC
+#define PAGE_READONLY		__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC	__pgprot(_PAGE_PRESENT | _PAGE_USER |	\
+					 _PAGE_ACCESSED)
+
+#define __PAGE_KERNEL_EXEC						\
+	(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+#define __PAGE_KERNEL		(__PAGE_KERNEL_EXEC | _PAGE_NX)
+
+#define __PAGE_KERNEL_RO		(__PAGE_KERNEL & ~_PAGE_RW)
+#define __PAGE_KERNEL_RX		(__PAGE_KERNEL_EXEC & ~_PAGE_RW)
+#define __PAGE_KERNEL_EXEC_NOCACHE	(__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_WC		(__PAGE_KERNEL | _PAGE_CACHE_WC)
+#define __PAGE_KERNEL_NOCACHE		(__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS		(__PAGE_KERNEL | _PAGE_PCD)
+#define __PAGE_KERNEL_VSYSCALL		(__PAGE_KERNEL_RX | _PAGE_USER)
+#define __PAGE_KERNEL_VSYSCALL_NOCACHE	(__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_LARGE		(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_NOCACHE	(__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define __PAGE_KERNEL_IO		(__PAGE_KERNEL | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_NOCACHE	(__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_UC_MINUS	(__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_WC		(__PAGE_KERNEL_WC | _PAGE_IOMAP)
+
+#define PAGE_KERNEL			__pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO			__pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC		__pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_RX			__pgprot(__PAGE_KERNEL_RX)
+#define PAGE_KERNEL_WC			__pgprot(__PAGE_KERNEL_WC)
+#define PAGE_KERNEL_NOCACHE		__pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS		__pgprot(__PAGE_KERNEL_UC_MINUS)
+#define PAGE_KERNEL_EXEC_NOCACHE	__pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
+#define PAGE_KERNEL_LARGE		__pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_NOCACHE	__pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
+#define PAGE_KERNEL_LARGE_EXEC		__pgprot(__PAGE_KERNEL_LARGE_EXEC)
+#define PAGE_KERNEL_VSYSCALL		__pgprot(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_VSYSCALL_NOCACHE	__pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+#define PAGE_KERNEL_IO			__pgprot(__PAGE_KERNEL_IO)
+#define PAGE_KERNEL_IO_NOCACHE		__pgprot(__PAGE_KERNEL_IO_NOCACHE)
+#define PAGE_KERNEL_IO_UC_MINUS		__pgprot(__PAGE_KERNEL_IO_UC_MINUS)
+#define PAGE_KERNEL_IO_WC		__pgprot(__PAGE_KERNEL_IO_WC)
+
+/*         xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/*
+ * early identity mapping  pte attrib macros.
+ */
+#ifdef CONFIG_X86_64
+#define __PAGE_KERNEL_IDENT_LARGE_EXEC	__PAGE_KERNEL_LARGE_EXEC
+#else
+/*
+ * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
+ * bits are combined, this will alow user to access the high address mapped
+ * VDSO in the presence of CONFIG_COMPAT_VDSO
+ */
+#define PTE_IDENT_ATTR	 0x003		/* PRESENT+RW */
+#define PDE_IDENT_ATTR	 0x067		/* PRESENT+RW+USER+DIRTY+ACCESSED */
+#define PGD_IDENT_ATTR	 0x001		/* PRESENT (no other attributes) */
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern pteval_t __supported_pte_mask;
+
+#define pgprot_writecombine	pgprot_writecombine
+extern pgprot_t pgprot_writecombine(pgprot_t prot);
+
+/* Indicate that x86 has its own track and untrack pfn vma functions */
+#define __HAVE_PFNMAP_TRACKING
+
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+                              unsigned long size, pgprot_t *vma_prot);
+
+/* Install a pte for a particular vaddr in kernel space. */
+void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+
+#ifdef CONFIG_X86_32
+extern void native_pagetable_setup_start(pgd_t *base);
+extern void native_pagetable_setup_done(pgd_t *base);
+#else
+static inline void native_pagetable_setup_start(pgd_t *base) {}
+static inline void native_pagetable_setup_done(pgd_t *base) {}
+#endif
+
+struct seq_file;
+extern void arch_report_meminfo(struct seq_file *m);
+
+enum {
+	PG_LEVEL_NONE,
+	PG_LEVEL_4K,
+	PG_LEVEL_2M,
+	PG_LEVEL_1G,
+	PG_LEVEL_NUM
+};
+
+#ifdef CONFIG_PROC_FS
+extern void update_page_count(int level, unsigned long pages);
+#else
+static inline void update_page_count(int level, unsigned long pages) { }
+#endif
+
+/*
+ * Helper function that returns the kernel pagetable entry controlling
+ * the virtual address 'address'. NULL means no pagetable entry present.
+ * NOTE: the return type is pte_t but if the pmd is PSE then we return it
+ * as a pte too.
+ */
+extern pte_t *lookup_address(unsigned long address, unsigned int *level);
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PGTABLE_DEFS_H */
-- 
cgit v1.2.3


From f402a65f93c7127b2bd93a4b2fe182cd859fb4c1 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 18:49:05 -0800
Subject: x86: Split pgtable_32.h into pgtable_32.h and pgtable_32_types.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/pgtable_32.h       | 42 +-----------------------------
 arch/x86/include/asm/pgtable_32_types.h | 46 +++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 41 deletions(-)
 create mode 100644 arch/x86/include/asm/pgtable_32_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 72d20e2a40f..97612fc7632 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_X86_PGTABLE_32_H
 #define _ASM_X86_PGTABLE_32_H
 
+#include <asm/pgtable_32_types.h>
 
 /*
  * The Linux memory management assumes a three-level page table setup. On
@@ -33,47 +34,6 @@ void paging_init(void);
 
 extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 
-/*
- * The Linux x86 paging architecture is 'compile-time dual-mode', it
- * implements both the traditional 2-level x86 page tables and the
- * newer 3-level PAE-mode page tables.
- */
-#ifdef CONFIG_X86_PAE
-# include <asm/pgtable-3level_types.h>
-# define PMD_SIZE	(1UL << PMD_SHIFT)
-# define PMD_MASK	(~(PMD_SIZE - 1))
-#else
-# include <asm/pgtable-2level_types.h>
-#endif
-
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
-
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET	(8 * 1024 * 1024)
-#define VMALLOC_START	((unsigned long)high_memory + VMALLOC_OFFSET)
-#ifdef CONFIG_X86_PAE
-#define LAST_PKMAP 512
-#else
-#define LAST_PKMAP 1024
-#endif
-
-#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1))	\
-		    & PMD_MASK)
-
-#ifdef CONFIG_HIGHMEM
-# define VMALLOC_END	(PKMAP_BASE - 2 * PAGE_SIZE)
-#else
-# define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
-#endif
-
-#define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
 
 /*
  * Define this if things work differently on an i386 and an i486:
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
new file mode 100644
index 00000000000..bd8df3b2fe0
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_X86_PGTABLE_32_DEFS_H
+#define _ASM_X86_PGTABLE_32_DEFS_H
+
+/*
+ * The Linux x86 paging architecture is 'compile-time dual-mode', it
+ * implements both the traditional 2-level x86 page tables and the
+ * newer 3-level PAE-mode page tables.
+ */
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level_types.h>
+# define PMD_SIZE	(1UL << PMD_SHIFT)
+# define PMD_MASK	(~(PMD_SIZE - 1))
+#else
+# include <asm/pgtable-2level_types.h>
+#endif
+
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET	(8 * 1024 * 1024)
+#define VMALLOC_START	((unsigned long)high_memory + VMALLOC_OFFSET)
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1))	\
+		    & PMD_MASK)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END	(PKMAP_BASE - 2 * PAGE_SIZE)
+#else
+# define VMALLOC_END	(FIXADDR_START - 2 * PAGE_SIZE)
+#endif
+
+#define MAXMEM	(VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
+
+#endif /* _ASM_X86_PGTABLE_32_DEFS_H */
-- 
cgit v1.2.3


From fb3551491b20442c0de0d4debd54f40c654bbe98 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 18:50:52 -0800
Subject: x86: Split pgtable_64.h into pgtable_64_types.h and pgtable_64.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/pgtable_64.h       | 48 ++-------------------------------
 arch/x86/include/asm/pgtable_64_types.h | 46 +++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+), 46 deletions(-)
 create mode 100644 arch/x86/include/asm/pgtable_64_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 1c4e247c51f..6b87bc6d501 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -2,6 +2,8 @@
 #define _ASM_X86_PGTABLE_64_H
 
 #include <linux/const.h>
+#include <asm/pgtable_64_types.h>
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -25,32 +27,6 @@ extern void paging_init(void);
 
 #endif /* !__ASSEMBLY__ */
 
-#define SHARED_KERNEL_PMD	0
-
-/*
- * PGDIR_SHIFT determines what a top-level page table entry can map
- */
-#define PGDIR_SHIFT	39
-#define PTRS_PER_PGD	512
-
-/*
- * 3rd level page
- */
-#define PUD_SHIFT	30
-#define PTRS_PER_PUD	512
-
-/*
- * PMD_SHIFT determines the size of the area a middle-level
- * page table can map
- */
-#define PMD_SHIFT	21
-#define PTRS_PER_PMD	512
-
-/*
- * entries per page directory level
- */
-#define PTRS_PER_PTE	512
-
 #ifndef __ASSEMBLY__
 
 #define pte_ERROR(e)					\
@@ -130,26 +106,6 @@ static inline void native_pgd_clear(pgd_t *pgd)
 	native_set_pgd(pgd, native_make_pgd(0));
 }
 
-#endif /* !__ASSEMBLY__ */
-
-#define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE - 1))
-#define PUD_SIZE	(_AC(1, UL) << PUD_SHIFT)
-#define PUD_MASK	(~(PUD_SIZE - 1))
-#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
-
-
-#define MAXMEM		 _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
-#define VMALLOC_START    _AC(0xffffc20000000000, UL)
-#define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
-#define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
-#define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
-#define MODULES_END      _AC(0xffffffffff000000, UL)
-#define MODULES_LEN   (MODULES_END - MODULES_VADDR)
-
-#ifndef __ASSEMBLY__
-
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
new file mode 100644
index 00000000000..ffaf1934068
--- /dev/null
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_X86_PGTABLE_64_DEFS_H
+#define _ASM_X86_PGTABLE_64_DEFS_H
+
+#define SHARED_KERNEL_PMD	0
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT	39
+#define PTRS_PER_PGD	512
+
+/*
+ * 3rd level page
+ */
+#define PUD_SHIFT	30
+#define PTRS_PER_PUD	512
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT	21
+#define PTRS_PER_PMD	512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE	512
+
+#define PMD_SIZE	(_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE - 1))
+#define PUD_SIZE	(_AC(1, UL) << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE - 1))
+#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+
+#define MAXMEM		 _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
+#define VMALLOC_START    _AC(0xffffc20000000000, UL)
+#define VMALLOC_END      _AC(0xffffe1ffffffffff, UL)
+#define VMEMMAP_START	 _AC(0xffffe20000000000, UL)
+#define MODULES_VADDR    _AC(0xffffffffa0000000, UL)
+#define MODULES_END      _AC(0xffffffffff000000, UL)
+#define MODULES_LEN   (MODULES_END - MODULES_VADDR)
+
+#endif /* _ASM_X86_PGTABLE_64_DEFS_H */
-- 
cgit v1.2.3


From 1484096ceb4d5f2b27c0fe53f125ee0903eac9af Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 19:02:47 -0800
Subject: x86: Include pgtable_32|64_types.h in pgtable_types.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/pgtable_types.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index f80f5a66bb8..e5d5a8d3577 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -217,4 +217,10 @@ extern pte_t *lookup_address(unsigned long address, unsigned int *level);
 
 #endif	/* !__ASSEMBLY__ */
 
+#ifdef CONFIG_X86_32
+# include "pgtable_32_types.h"
+#else
+# include "pgtable_64_types.h"
+#endif
+
 #endif /* _ASM_X86_PGTABLE_DEFS_H */
-- 
cgit v1.2.3


From 51c78eb3f0eb033f9fb4f2316851df1d9b07b953 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 22:52:14 -0800
Subject: x86: create _types.h counterparts for page*.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/page.h          |  64 +-------------------
 arch/x86/include/asm/page_32.h       |  89 +--------------------------
 arch/x86/include/asm/page_32_types.h |  90 +++++++++++++++++++++++++++
 arch/x86/include/asm/page_64.h       | 101 +------------------------------
 arch/x86/include/asm/page_64.h.rej   | 114 +++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/page_64_types.h | 102 +++++++++++++++++++++++++++++++
 arch/x86/include/asm/page_types.h    |  77 +++++++++++++++++++++++
 7 files changed, 389 insertions(+), 248 deletions(-)
 create mode 100644 arch/x86/include/asm/page_32_types.h
 create mode 100644 arch/x86/include/asm/page_64.h.rej
 create mode 100644 arch/x86/include/asm/page_64_types.h
 create mode 100644 arch/x86/include/asm/page_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 40226999cbf..3b2d2af951c 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -1,42 +1,9 @@
 #ifndef _ASM_X86_PAGE_H
 #define _ASM_X86_PAGE_H
 
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
 #ifdef __KERNEL__
 
-#define __PHYSICAL_MASK		((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
-#define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
-
-/* Cast PAGE_MASK to a signed type so that it is sign-extended if
-   virtual addresses are 32-bits but physical addresses are larger
-   (ie, 32-bit PAE). */
-#define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
-
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
-#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
-
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
-#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
-
-#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
-#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
-
-#define HPAGE_SHIFT		PMD_SHIFT
-#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-
-#define HUGE_MAX_HSTATE 2
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
+#include <asm/page_types.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/page_64.h>
@@ -44,39 +11,18 @@
 #include <asm/page_32.h>
 #endif	/* CONFIG_X86_64 */
 
-#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
-
-#define VM_DATA_DEFAULT_FLAGS \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
-	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-
 #ifndef __ASSEMBLY__
 
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pgprotval_t pgprot; } pgprot_t;
-
-extern int page_is_ram(unsigned long pagenr);
-extern int pagerange_is_ram(unsigned long start, unsigned long end);
-extern int devmem_is_allowed(unsigned long pagenr);
-extern void map_devmem(unsigned long pfn, unsigned long size,
-		       pgprot_t vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
-			 pgprot_t vma_prot);
-
-extern unsigned long max_low_pfn_mapped;
-extern unsigned long max_pfn_mapped;
-
 struct page;
 
 static inline void clear_user_page(void *page, unsigned long vaddr,
-				struct page *pg)
+				   struct page *pg)
 {
 	clear_page(page);
 }
 
 static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
-				struct page *topage)
+				  struct page *topage)
 {
 	copy_page(to, from);
 }
@@ -102,8 +48,6 @@ static inline pgdval_t pgd_flags(pgd_t pgd)
 
 #if PAGETABLE_LEVELS >= 3
 #if PAGETABLE_LEVELS == 4
-typedef struct { pudval_t pud; } pud_t;
-
 static inline pud_t native_make_pud(pmdval_t val)
 {
 	return (pud_t) { val };
@@ -127,8 +71,6 @@ static inline pudval_t pud_flags(pud_t pud)
 	return native_pud_val(pud) & PTE_FLAGS_MASK;
 }
 
-typedef struct { pmdval_t pmd; } pmd_t;
-
 static inline pmd_t native_make_pmd(pmdval_t val)
 {
 	return (pmd_t) { val };
diff --git a/arch/x86/include/asm/page_32.h b/arch/x86/include/asm/page_32.h
index bcde0d7b432..b3f0bf79e84 100644
--- a/arch/x86/include/asm/page_32.h
+++ b/arch/x86/include/asm/page_32.h
@@ -1,82 +1,12 @@
 #ifndef _ASM_X86_PAGE_32_H
 #define _ASM_X86_PAGE_32_H
 
-/*
- * This handles the memory map.
- *
- * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
- * a virtual address space of one gigabyte, which limits the
- * amount of physical memory you can use to about 950MB.
- *
- * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
- * and CONFIG_HIGHMEM64G options in the kernel configuration.
- */
-#define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
-
-#ifdef CONFIG_4KSTACKS
-#define THREAD_ORDER	0
-#else
-#define THREAD_ORDER	1
-#endif
-#define THREAD_SIZE 	(PAGE_SIZE << THREAD_ORDER)
-
-#define STACKFAULT_STACK 0
-#define DOUBLEFAULT_STACK 1
-#define NMI_STACK 0
-#define DEBUG_STACK 0
-#define MCE_STACK 0
-#define N_EXCEPTION_STACKS 1
-
-#ifdef CONFIG_X86_PAE
-/* 44=32+12, the limit we can fit into an unsigned long pfn */
-#define __PHYSICAL_MASK_SHIFT	44
-#define __VIRTUAL_MASK_SHIFT	32
-#define PAGETABLE_LEVELS	3
-
-#ifndef __ASSEMBLY__
-typedef u64	pteval_t;
-typedef u64	pmdval_t;
-typedef u64	pudval_t;
-typedef u64	pgdval_t;
-typedef u64	pgprotval_t;
-
-typedef union {
-	struct {
-		unsigned long pte_low, pte_high;
-	};
-	pteval_t pte;
-} pte_t;
-#endif	/* __ASSEMBLY__
- */
-#else  /* !CONFIG_X86_PAE */
-#define __PHYSICAL_MASK_SHIFT	32
-#define __VIRTUAL_MASK_SHIFT	32
-#define PAGETABLE_LEVELS	2
-
-#ifndef __ASSEMBLY__
-typedef unsigned long	pteval_t;
-typedef unsigned long	pmdval_t;
-typedef unsigned long	pudval_t;
-typedef unsigned long	pgdval_t;
-typedef unsigned long	pgprotval_t;
-
-typedef union {
-	pteval_t pte;
-	pteval_t pte_low;
-} pte_t;
-
-#endif	/* __ASSEMBLY__ */
-#endif	/* CONFIG_X86_PAE */
-
-#ifndef __ASSEMBLY__
-typedef struct page *pgtable_t;
-#endif
+#include <asm/page_32_types.h>
 
 #ifdef CONFIG_HUGETLB_PAGE
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
 #endif
 
-#ifndef __ASSEMBLY__
 #define __phys_addr_nodebug(x)	((x) - PAGE_OFFSET)
 #ifdef CONFIG_DEBUG_VIRTUAL
 extern unsigned long __phys_addr(unsigned long);
@@ -89,22 +19,7 @@ extern unsigned long __phys_addr(unsigned long);
 #define pfn_valid(pfn)		((pfn) < max_mapnr)
 #endif /* CONFIG_FLATMEM */
 
-extern int nx_enabled;
-
-/*
- * This much address space is reserved for vmalloc() and iomap()
- * as well as fixmap mappings.
- */
-extern unsigned int __VMALLOC_RESERVE;
-extern int sysctl_legacy_va_layout;
-
-extern void find_low_pfn_range(void);
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-extern void initmem_init(unsigned long, unsigned long);
-extern void free_initmem(void);
-extern void setup_bootmem_allocator(void);
-
+#ifndef __ASSEMBLY__
 
 #ifdef CONFIG_X86_USE_3DNOW
 #include <asm/mmx.h>
diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
new file mode 100644
index 00000000000..b7b5402d7ab
--- /dev/null
+++ b/arch/x86/include/asm/page_32_types.h
@@ -0,0 +1,90 @@
+#ifndef _ASM_X86_PAGE_32_DEFS_H
+#define _ASM_X86_PAGE_32_DEFS_H
+
+#include <linux/const.h>
+
+/*
+ * This handles the memory map.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+#define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_ORDER	0
+#else
+#define THREAD_ORDER	1
+#endif
+#define THREAD_SIZE 	(PAGE_SIZE << THREAD_ORDER)
+
+#define STACKFAULT_STACK 0
+#define DOUBLEFAULT_STACK 1
+#define NMI_STACK 0
+#define DEBUG_STACK 0
+#define MCE_STACK 0
+#define N_EXCEPTION_STACKS 1
+
+#ifdef CONFIG_X86_PAE
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT	44
+#define __VIRTUAL_MASK_SHIFT	32
+#define PAGETABLE_LEVELS	3
+
+#else  /* !CONFIG_X86_PAE */
+#define __PHYSICAL_MASK_SHIFT	32
+#define __VIRTUAL_MASK_SHIFT	32
+#define PAGETABLE_LEVELS	2
+#endif	/* CONFIG_X86_PAE */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_X86_PAE
+typedef u64	pteval_t;
+typedef u64	pmdval_t;
+typedef u64	pudval_t;
+typedef u64	pgdval_t;
+typedef u64	pgprotval_t;
+
+typedef union {
+	struct {
+		unsigned long pte_low, pte_high;
+	};
+	pteval_t pte;
+} pte_t;
+#else  /* !CONFIG_X86_PAE */
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef union {
+	pteval_t pte;
+	pteval_t pte_low;
+} pte_t;
+#endif	/* CONFIG_X86_PAE */
+
+extern int nx_enabled;
+
+/*
+ * This much address space is reserved for vmalloc() and iomap()
+ * as well as fixmap mappings.
+ */
+extern unsigned int __VMALLOC_RESERVE;
+extern int sysctl_legacy_va_layout;
+
+extern void find_low_pfn_range(void);
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+extern void initmem_init(unsigned long, unsigned long);
+extern void free_initmem(void);
+extern void setup_bootmem_allocator(void);
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PAGE_32_DEFS_H */
diff --git a/arch/x86/include/asm/page_64.h b/arch/x86/include/asm/page_64.h
index e27fdbe5f9e..072694ed81a 100644
--- a/arch/x86/include/asm/page_64.h
+++ b/arch/x86/include/asm/page_64.h
@@ -1,105 +1,6 @@
 #ifndef _ASM_X86_PAGE_64_H
 #define _ASM_X86_PAGE_64_H
 
-#define PAGETABLE_LEVELS	4
-
-#define THREAD_ORDER	1
-#define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
-#define CURRENT_MASK (~(THREAD_SIZE - 1))
-
-#define EXCEPTION_STACK_ORDER 0
-#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
-
-#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
-#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
-
-#define IRQ_STACK_ORDER 2
-#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
-
-#define STACKFAULT_STACK 1
-#define DOUBLEFAULT_STACK 2
-#define NMI_STACK 3
-#define DEBUG_STACK 4
-#define MCE_STACK 5
-#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
-
-#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
-
-/*
- * Set __PAGE_OFFSET to the most negative possible address +
- * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
- * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
- * what Xen requires.
- */
-#define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
-
-#define __PHYSICAL_START	CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN		0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
-
-#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
-#define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
-
-/* See Documentation/x86_64/mm.txt for a description of the memory map. */
-#define __PHYSICAL_MASK_SHIFT	46
-#define __VIRTUAL_MASK_SHIFT	48
-
-/*
- * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
- * arch/x86/kernel/head_64.S), and it is mapped here:
- */
-#define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
-#define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
-
-#ifndef __ASSEMBLY__
-void clear_page(void *page);
-void copy_page(void *to, void *from);
-
-/* duplicated to the one in bootmem.h */
-extern unsigned long max_pfn;
-extern unsigned long phys_base;
-
-extern unsigned long __phys_addr(unsigned long);
-#define __phys_reloc_hide(x)	(x)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef unsigned long	pteval_t;
-typedef unsigned long	pmdval_t;
-typedef unsigned long	pudval_t;
-typedef unsigned long	pgdval_t;
-typedef unsigned long	pgprotval_t;
-
-typedef struct page *pgtable_t;
-
-typedef struct { pteval_t pte; } pte_t;
-
-#define vmemmap ((struct page *)VMEMMAP_START)
-
-extern unsigned long init_memory_mapping(unsigned long start,
-					 unsigned long end);
-
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
-extern void free_initmem(void);
-
-extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
-extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
-
-#endif	/* !__ASSEMBLY__ */
-
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)          ((pfn) < max_pfn)
-#endif
-
+#include <asm/page_64_types.h>
 
 #endif /* _ASM_X86_PAGE_64_H */
diff --git a/arch/x86/include/asm/page_64.h.rej b/arch/x86/include/asm/page_64.h.rej
new file mode 100644
index 00000000000..9b1807f1859
--- /dev/null
+++ b/arch/x86/include/asm/page_64.h.rej
@@ -0,0 +1,114 @@
+***************
+*** 1,105 ****
+  #ifndef _ASM_X86_PAGE_64_H
+  #define _ASM_X86_PAGE_64_H
+  
+- #define PAGETABLE_LEVELS	4
+- 
+- #define THREAD_ORDER	1
+- #define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
+- #define CURRENT_MASK (~(THREAD_SIZE - 1))
+- 
+- #define EXCEPTION_STACK_ORDER 0
+- #define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+- 
+- #define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
+- #define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
+- 
+- #define IRQSTACK_ORDER 2
+- #define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
+- 
+- #define STACKFAULT_STACK 1
+- #define DOUBLEFAULT_STACK 2
+- #define NMI_STACK 3
+- #define DEBUG_STACK 4
+- #define MCE_STACK 5
+- #define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
+- 
+- #define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+- #define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+- 
+- /*
+-  * Set __PAGE_OFFSET to the most negative possible address +
+-  * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
+-  * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
+-  * what Xen requires.
+-  */
+- #define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
+- 
+- #define __PHYSICAL_START	CONFIG_PHYSICAL_START
+- #define __KERNEL_ALIGN		0x200000
+- 
+- /*
+-  * Make sure kernel is aligned to 2MB address. Catching it at compile
+-  * time is better. Change your config file and compile the kernel
+-  * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+-  */
+- #if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+- #error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+- #endif
+- 
+- #define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+- #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
+- 
+- /* See Documentation/x86_64/mm.txt for a description of the memory map. */
+- #define __PHYSICAL_MASK_SHIFT	46
+- #define __VIRTUAL_MASK_SHIFT	48
+- 
+- /*
+-  * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
+-  * arch/x86/kernel/head_64.S), and it is mapped here:
+-  */
+- #define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
+- #define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
+- 
+- #ifndef __ASSEMBLY__
+- void clear_page(void *page);
+- void copy_page(void *to, void *from);
+- 
+- /* duplicated to the one in bootmem.h */
+- extern unsigned long max_pfn;
+- extern unsigned long phys_base;
+- 
+- extern unsigned long __phys_addr(unsigned long);
+- #define __phys_reloc_hide(x)	(x)
+- 
+- /*
+-  * These are used to make use of C type-checking..
+-  */
+- typedef unsigned long	pteval_t;
+- typedef unsigned long	pmdval_t;
+- typedef unsigned long	pudval_t;
+- typedef unsigned long	pgdval_t;
+- typedef unsigned long	pgprotval_t;
+- 
+- typedef struct page *pgtable_t;
+- 
+- typedef struct { pteval_t pte; } pte_t;
+- 
+- #define vmemmap ((struct page *)VMEMMAP_START)
+- 
+- extern unsigned long init_memory_mapping(unsigned long start,
+- 					 unsigned long end);
+- 
+- extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+- extern void free_initmem(void);
+- 
+- extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+- extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+- 
+- #endif	/* !__ASSEMBLY__ */
+- 
+- #ifdef CONFIG_FLATMEM
+- #define pfn_valid(pfn)          ((pfn) < max_pfn)
+- #endif
+- 
+  
+  #endif /* _ASM_X86_PAGE_64_H */
+--- 1,6 ----
+  #ifndef _ASM_X86_PAGE_64_H
+  #define _ASM_X86_PAGE_64_H
+  
++ #include <asm/page_64_types.h>
+  
+  #endif /* _ASM_X86_PAGE_64_H */
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
new file mode 100644
index 00000000000..d00cd388082
--- /dev/null
+++ b/arch/x86/include/asm/page_64_types.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_X86_PAGE_64_DEFS_H
+#define _ASM_X86_PAGE_64_DEFS_H
+
+#define PAGETABLE_LEVELS	4
+
+#define THREAD_ORDER	1
+#define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
+#define CURRENT_MASK (~(THREAD_SIZE - 1))
+
+#define EXCEPTION_STACK_ORDER 0
+#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+
+#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
+#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
+
+#define IRQ_STACK_ORDER 2
+#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
+
+#define STACKFAULT_STACK 1
+#define DOUBLEFAULT_STACK 2
+#define NMI_STACK 3
+#define DEBUG_STACK 4
+#define MCE_STACK 5
+#define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
+
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+
+/*
+ * Set __PAGE_OFFSET to the most negative possible address +
+ * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
+ * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
+ * what Xen requires.
+ */
+#define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
+
+#define __PHYSICAL_START	CONFIG_PHYSICAL_START
+#define __KERNEL_ALIGN		0x200000
+
+/*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+#endif
+
+#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+#define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
+
+/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+#define __PHYSICAL_MASK_SHIFT	46
+#define __VIRTUAL_MASK_SHIFT	48
+
+/*
+ * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
+ * arch/x86/kernel/head_64.S), and it is mapped here:
+ */
+#define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
+#define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
+
+#ifndef __ASSEMBLY__
+void clear_page(void *page);
+void copy_page(void *to, void *from);
+
+/* duplicated to the one in bootmem.h */
+extern unsigned long max_pfn;
+extern unsigned long phys_base;
+
+extern unsigned long __phys_addr(unsigned long);
+#define __phys_reloc_hide(x)	(x)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef struct { pteval_t pte; } pte_t;
+
+#define vmemmap ((struct page *)VMEMMAP_START)
+
+extern unsigned long init_memory_mapping(unsigned long start,
+					 unsigned long end);
+
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
+
+extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)          ((pfn) < max_pfn)
+#endif
+
+#endif /* _ASM_X86_PAGE_64_DEFS_H */
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
new file mode 100644
index 00000000000..65787ad4c59
--- /dev/null
+++ b/arch/x86/include/asm/page_types.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_X86_PAGE_DEFS_H
+#define _ASM_X86_PAGE_DEFS_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#define __PHYSICAL_MASK		((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+   virtual addresses are 32-bits but physical addresses are larger
+   (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
+
+#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
+#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
+
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#define HUGE_MAX_HSTATE 2
+
+#define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifdef CONFIG_X86_64
+#include <asm/page_64_types.h>
+#else
+#include <asm/page_32_types.h>
+#endif	/* CONFIG_X86_64 */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pgprotval_t pgprot; } pgprot_t;
+
+#if PAGETABLE_LEVELS > 3
+typedef struct { pudval_t pud; } pud_t;
+#endif
+
+#if PAGETABLE_LEVELS > 2
+typedef struct { pmdval_t pmd; } pmd_t;
+#endif
+
+typedef struct page *pgtable_t;
+
+extern int page_is_ram(unsigned long pagenr);
+extern int pagerange_is_ram(unsigned long start, unsigned long end);
+extern int devmem_is_allowed(unsigned long pagenr);
+extern void map_devmem(unsigned long pfn, unsigned long size,
+		       pgprot_t vma_prot);
+extern void unmap_devmem(unsigned long pfn, unsigned long size,
+			 pgprot_t vma_prot);
+
+extern unsigned long max_low_pfn_mapped;
+extern unsigned long max_pfn_mapped;
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif	/* _ASM_X86_PAGE_DEFS_H */
-- 
cgit v1.2.3


From 1dfc07aad5479f1fb832ff6f61a5a9ce822d9e1f Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 23:24:26 -0800
Subject: x86: move 2 and 3 level asm-generic defs into page-defs

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/page.h       | 4 ----
 arch/x86/include/asm/page_types.h | 4 ++++
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 3b2d2af951c..da54f6c48a7 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -58,8 +58,6 @@ static inline pudval_t native_pud_val(pud_t pud)
 	return pud.pud;
 }
 #else	/* PAGETABLE_LEVELS == 3 */
-#include <asm-generic/pgtable-nopud.h>
-
 static inline pudval_t native_pud_val(pud_t pud)
 {
 	return native_pgd_val(pud.pgd);
@@ -82,8 +80,6 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 
 #else  /* PAGETABLE_LEVELS == 2 */
-#include <asm-generic/pgtable-nopmd.h>
-
 static inline pmdval_t native_pmd_val(pmd_t pmd)
 {
 	return native_pgd_val(pmd.pud.pgd);
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 65787ad4c59..92dfd251a65 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -53,10 +53,14 @@ typedef struct { pgprotval_t pgprot; } pgprot_t;
 
 #if PAGETABLE_LEVELS > 3
 typedef struct { pudval_t pud; } pud_t;
+#else
+#include <asm-generic/pgtable-nopud.h>
 #endif
 
 #if PAGETABLE_LEVELS > 2
 typedef struct { pmdval_t pmd; } pmd_t;
+#else
+#include <asm-generic/pgtable-nopmd.h>
 #endif
 
 typedef struct page *pgtable_t;
-- 
cgit v1.2.3


From e42778de31d78ae262a3b901264eabefb9c3b51b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Sun, 8 Feb 2009 23:42:01 -0800
Subject: x86: move defs around to allow paravirt.h to just include
 page_types.h

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/include/asm/page.h          | 78 ------------------------------------
 arch/x86/include/asm/page_32_types.h |  2 +
 arch/x86/include/asm/page_types.h    | 74 ++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/paravirt.h      |  2 +-
 4 files changed, 77 insertions(+), 79 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index da54f6c48a7..28423609b00 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -31,84 +31,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
 	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
 #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
 
-static inline pgd_t native_make_pgd(pgdval_t val)
-{
-	return (pgd_t) { val };
-}
-
-static inline pgdval_t native_pgd_val(pgd_t pgd)
-{
-	return pgd.pgd;
-}
-
-static inline pgdval_t pgd_flags(pgd_t pgd)
-{
-	return native_pgd_val(pgd) & PTE_FLAGS_MASK;
-}
-
-#if PAGETABLE_LEVELS >= 3
-#if PAGETABLE_LEVELS == 4
-static inline pud_t native_make_pud(pmdval_t val)
-{
-	return (pud_t) { val };
-}
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
-	return pud.pud;
-}
-#else	/* PAGETABLE_LEVELS == 3 */
-static inline pudval_t native_pud_val(pud_t pud)
-{
-	return native_pgd_val(pud.pgd);
-}
-#endif	/* PAGETABLE_LEVELS == 4 */
-
-static inline pudval_t pud_flags(pud_t pud)
-{
-	return native_pud_val(pud) & PTE_FLAGS_MASK;
-}
-
-static inline pmd_t native_make_pmd(pmdval_t val)
-{
-	return (pmd_t) { val };
-}
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
-	return pmd.pmd;
-}
-
-#else  /* PAGETABLE_LEVELS == 2 */
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
-	return native_pgd_val(pmd.pud.pgd);
-}
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-static inline pmdval_t pmd_flags(pmd_t pmd)
-{
-	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
-}
-
-static inline pte_t native_make_pte(pteval_t val)
-{
-	return (pte_t) { .pte = val };
-}
-
-static inline pteval_t native_pte_val(pte_t pte)
-{
-	return pte.pte;
-}
-
-static inline pteval_t pte_flags(pte_t pte)
-{
-	return native_pte_val(pte) & PTE_FLAGS_MASK;
-}
-
-#define pgprot_val(x)	((x).pgprot)
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else  /* !CONFIG_PARAVIRT */
diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
index b7b5402d7ab..83f820a2b10 100644
--- a/arch/x86/include/asm/page_32_types.h
+++ b/arch/x86/include/asm/page_32_types.h
@@ -43,6 +43,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/types.h>
+
 #ifdef CONFIG_X86_PAE
 typedef u64	pteval_t;
 typedef u64	pmdval_t;
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 92dfd251a65..c41e3e8f227 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -51,18 +51,92 @@
 typedef struct { pgdval_t pgd; } pgd_t;
 typedef struct { pgprotval_t pgprot; } pgprot_t;
 
+static inline pgd_t native_make_pgd(pgdval_t val)
+{
+	return (pgd_t) { val };
+}
+
+static inline pgdval_t native_pgd_val(pgd_t pgd)
+{
+	return pgd.pgd;
+}
+
+static inline pgdval_t pgd_flags(pgd_t pgd)
+{
+	return native_pgd_val(pgd) & PTE_FLAGS_MASK;
+}
+
 #if PAGETABLE_LEVELS > 3
 typedef struct { pudval_t pud; } pud_t;
+
+static inline pud_t native_make_pud(pmdval_t val)
+{
+	return (pud_t) { val };
+}
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return pud.pud;
+}
 #else
 #include <asm-generic/pgtable-nopud.h>
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return native_pgd_val(pud.pgd);
+}
 #endif
 
 #if PAGETABLE_LEVELS > 2
 typedef struct { pmdval_t pmd; } pmd_t;
+
+static inline pudval_t pud_flags(pud_t pud)
+{
+	return native_pud_val(pud) & PTE_FLAGS_MASK;
+}
+
+static inline pmd_t native_make_pmd(pmdval_t val)
+{
+	return (pmd_t) { val };
+}
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return pmd.pmd;
+}
 #else
 #include <asm-generic/pgtable-nopmd.h>
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return native_pgd_val(pmd.pud.pgd);
+}
 #endif
 
+static inline pmdval_t pmd_flags(pmd_t pmd)
+{
+	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+}
+
+static inline pte_t native_make_pte(pteval_t val)
+{
+	return (pte_t) { .pte = val };
+}
+
+static inline pteval_t native_pte_val(pte_t pte)
+{
+	return pte.pte;
+}
+
+static inline pteval_t pte_flags(pte_t pte)
+{
+	return native_pte_val(pte) & PTE_FLAGS_MASK;
+}
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+
 typedef struct page *pgtable_t;
 
 extern int page_is_ram(unsigned long pagenr);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index c85e7475e17..db570f23b22 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -4,7 +4,7 @@
  * para-virtualization: those hooks are defined here. */
 
 #ifdef CONFIG_PARAVIRT
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/asm.h>
 
 /* Bitmask of what can be clobbered: usually at least eax. */
-- 
cgit v1.2.3


From e2f5bda94152fa567f6b48126741014123f982b8 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 9 Feb 2009 00:09:52 -0800
Subject: x86: define pud_flags and pud_large properly to allow non-PAE builds

---
 arch/x86/include/asm/page_types.h | 10 +++++-----
 arch/x86/include/asm/pgtable.h    |  7 ++++++-
 2 files changed, 11 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index c41e3e8f227..0733853e7c8 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -90,11 +90,6 @@ static inline pudval_t native_pud_val(pud_t pud)
 #if PAGETABLE_LEVELS > 2
 typedef struct { pmdval_t pmd; } pmd_t;
 
-static inline pudval_t pud_flags(pud_t pud)
-{
-	return native_pud_val(pud) & PTE_FLAGS_MASK;
-}
-
 static inline pmd_t native_make_pmd(pmdval_t val)
 {
 	return (pmd_t) { val };
@@ -113,6 +108,11 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 }
 #endif
 
+static inline pudval_t pud_flags(pud_t pud)
+{
+	return native_pud_val(pud) & PTE_FLAGS_MASK;
+}
+
 static inline pmdval_t pmd_flags(pmd_t pmd)
 {
 	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 10404e7bf32..9f508509797 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -398,7 +398,7 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
 
 static inline int pud_large(pud_t pud)
 {
-	return (pud_flags(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
 		(_PAGE_PSE | _PAGE_PRESENT);
 }
 
@@ -406,6 +406,11 @@ static inline int pud_bad(pud_t pud)
 {
 	return (pud_flags(pud) & ~(_KERNPG_TABLE | _PAGE_USER)) != 0;
 }
+#else
+static inline int pud_large(pud_t pud)
+{
+	return 0;
+}
 #endif	/* PAGETABLE_LEVELS > 2 */
 
 #if PAGETABLE_LEVELS > 3
-- 
cgit v1.2.3


From 54321d947ae9d6a051b81e3eccaf2d8658aeecc6 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 11 Feb 2009 10:20:05 -0800
Subject: x86: move pte types into pgtable*.h

pgtable*.h is intended for definitions relating to actual pagetables
and their entries, so move all the definitions for
(pte|pmd|pud|pgd)(val)?_t to the appropriate pgtable*.h headers.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/page.h                 |  22 ------
 arch/x86/include/asm/page_32_types.h        |  30 --------
 arch/x86/include/asm/page_64_types.h        |  11 ---
 arch/x86/include/asm/page_types.h           |  97 +------------------------
 arch/x86/include/asm/paravirt.h             |   2 +-
 arch/x86/include/asm/pgtable-2level_types.h |  15 ++++
 arch/x86/include/asm/pgtable-3level_types.h |  18 +++++
 arch/x86/include/asm/pgtable.h              | 103 +++++++++++++++-----------
 arch/x86/include/asm/pgtable_64_types.h     |  16 +++++
 arch/x86/include/asm/pgtable_types.h        | 107 ++++++++++++++++++++++++++--
 arch/x86/include/asm/processor.h            |   1 +
 11 files changed, 215 insertions(+), 207 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 28423609b00..467ce69306b 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -31,28 +31,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
 	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
 #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
 
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else  /* !CONFIG_PARAVIRT */
-
-#define pgd_val(x)	native_pgd_val(x)
-#define __pgd(x)	native_make_pgd(x)
-
-#ifndef __PAGETABLE_PUD_FOLDED
-#define pud_val(x)	native_pud_val(x)
-#define __pud(x)	native_make_pud(x)
-#endif
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define pmd_val(x)	native_pmd_val(x)
-#define __pmd(x)	native_make_pmd(x)
-#endif
-
-#define pte_val(x)	native_pte_val(x)
-#define __pte(x)	native_make_pte(x)
-
-#endif	/* CONFIG_PARAVIRT */
-
 #define __pa(x)		__phys_addr((unsigned long)(x))
 #define __pa_nodebug(x)	__phys_addr_nodebug((unsigned long)(x))
 /* __pa_symbol should be used for C visible symbols.
diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
index 83f820a2b10..b5486aaf36e 100644
--- a/arch/x86/include/asm/page_32_types.h
+++ b/arch/x86/include/asm/page_32_types.h
@@ -43,36 +43,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/types.h>
-
-#ifdef CONFIG_X86_PAE
-typedef u64	pteval_t;
-typedef u64	pmdval_t;
-typedef u64	pudval_t;
-typedef u64	pgdval_t;
-typedef u64	pgprotval_t;
-
-typedef union {
-	struct {
-		unsigned long pte_low, pte_high;
-	};
-	pteval_t pte;
-} pte_t;
-#else  /* !CONFIG_X86_PAE */
-typedef unsigned long	pteval_t;
-typedef unsigned long	pmdval_t;
-typedef unsigned long	pudval_t;
-typedef unsigned long	pgdval_t;
-typedef unsigned long	pgprotval_t;
-
-typedef union {
-	pteval_t pte;
-	pteval_t pte_low;
-} pte_t;
-#endif	/* CONFIG_X86_PAE */
-
-extern int nx_enabled;
-
 /*
  * This much address space is reserved for vmalloc() and iomap()
  * as well as fixmap mappings.
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index d00cd388082..bc73af3eda9 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -71,17 +71,6 @@ extern unsigned long phys_base;
 extern unsigned long __phys_addr(unsigned long);
 #define __phys_reloc_hide(x)	(x)
 
-/*
- * These are used to make use of C type-checking..
- */
-typedef unsigned long	pteval_t;
-typedef unsigned long	pmdval_t;
-typedef unsigned long	pudval_t;
-typedef unsigned long	pgdval_t;
-typedef unsigned long	pgprotval_t;
-
-typedef struct { pteval_t pte; } pte_t;
-
 #define vmemmap ((struct page *)VMEMMAP_START)
 
 extern unsigned long init_memory_mapping(unsigned long start,
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 0733853e7c8..9f0c9596335 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -46,106 +46,15 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/types.h>
-
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pgprotval_t pgprot; } pgprot_t;
-
-static inline pgd_t native_make_pgd(pgdval_t val)
-{
-	return (pgd_t) { val };
-}
-
-static inline pgdval_t native_pgd_val(pgd_t pgd)
-{
-	return pgd.pgd;
-}
-
-static inline pgdval_t pgd_flags(pgd_t pgd)
-{
-	return native_pgd_val(pgd) & PTE_FLAGS_MASK;
-}
-
-#if PAGETABLE_LEVELS > 3
-typedef struct { pudval_t pud; } pud_t;
-
-static inline pud_t native_make_pud(pmdval_t val)
-{
-	return (pud_t) { val };
-}
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
-	return pud.pud;
-}
-#else
-#include <asm-generic/pgtable-nopud.h>
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
-	return native_pgd_val(pud.pgd);
-}
-#endif
-
-#if PAGETABLE_LEVELS > 2
-typedef struct { pmdval_t pmd; } pmd_t;
-
-static inline pmd_t native_make_pmd(pmdval_t val)
-{
-	return (pmd_t) { val };
-}
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
-	return pmd.pmd;
-}
-#else
-#include <asm-generic/pgtable-nopmd.h>
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
-	return native_pgd_val(pmd.pud.pgd);
-}
-#endif
-
-static inline pudval_t pud_flags(pud_t pud)
-{
-	return native_pud_val(pud) & PTE_FLAGS_MASK;
-}
-
-static inline pmdval_t pmd_flags(pmd_t pmd)
-{
-	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
-}
-
-static inline pte_t native_make_pte(pteval_t val)
-{
-	return (pte_t) { .pte = val };
-}
-
-static inline pteval_t native_pte_val(pte_t pte)
-{
-	return pte.pte;
-}
-
-static inline pteval_t pte_flags(pte_t pte)
-{
-	return native_pte_val(pte) & PTE_FLAGS_MASK;
-}
-
-#define pgprot_val(x)	((x).pgprot)
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-
-typedef struct page *pgtable_t;
+struct pgprot;
 
 extern int page_is_ram(unsigned long pagenr);
 extern int pagerange_is_ram(unsigned long start, unsigned long end);
 extern int devmem_is_allowed(unsigned long pagenr);
 extern void map_devmem(unsigned long pfn, unsigned long size,
-		       pgprot_t vma_prot);
+		       struct pgprot vma_prot);
 extern void unmap_devmem(unsigned long pfn, unsigned long size,
-			 pgprot_t vma_prot);
+			 struct pgprot vma_prot);
 
 extern unsigned long max_low_pfn_mapped;
 extern unsigned long max_pfn_mapped;
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index db570f23b22..7ed73ccd74e 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -4,7 +4,7 @@
  * para-virtualization: those hooks are defined here. */
 
 #ifdef CONFIG_PARAVIRT
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 #include <asm/asm.h>
 
 /* Bitmask of what can be clobbered: usually at least eax. */
diff --git a/arch/x86/include/asm/pgtable-2level_types.h b/arch/x86/include/asm/pgtable-2level_types.h
index d77db8990ea..09ae67efceb 100644
--- a/arch/x86/include/asm/pgtable-2level_types.h
+++ b/arch/x86/include/asm/pgtable-2level_types.h
@@ -1,6 +1,21 @@
 #ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H
 #define _ASM_X86_PGTABLE_2LEVEL_DEFS_H
 
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef union {
+	pteval_t pte;
+	pteval_t pte_low;
+} pte_t;
+#endif	/* !__ASSEMBLY__ */
+
 #define SHARED_KERNEL_PMD	0
 
 /*
diff --git a/arch/x86/include/asm/pgtable-3level_types.h b/arch/x86/include/asm/pgtable-3level_types.h
index 62561367653..bcc89625ebe 100644
--- a/arch/x86/include/asm/pgtable-3level_types.h
+++ b/arch/x86/include/asm/pgtable-3level_types.h
@@ -1,6 +1,23 @@
 #ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H
 #define _ASM_X86_PGTABLE_3LEVEL_DEFS_H
 
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef u64	pteval_t;
+typedef u64	pmdval_t;
+typedef u64	pudval_t;
+typedef u64	pgdval_t;
+typedef u64	pgprotval_t;
+
+typedef union {
+	struct {
+		unsigned long pte_low, pte_high;
+	};
+	pteval_t pte;
+} pte_t;
+#endif	/* !__ASSEMBLY__ */
+
 #ifdef CONFIG_PARAVIRT
 #define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
 #else
@@ -25,4 +42,5 @@
  */
 #define PTRS_PER_PTE	512
 
+
 #endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 9f508509797..b0d1066ab6a 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -25,6 +25,66 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 extern spinlock_t pgd_lock;
 extern struct list_head pgd_list;
 
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else  /* !CONFIG_PARAVIRT */
+#define set_pte(ptep, pte)		native_set_pte(ptep, pte)
+#define set_pte_at(mm, addr, ptep, pte)	native_set_pte_at(mm, addr, ptep, pte)
+
+#define set_pte_present(mm, addr, ptep, pte)				\
+	native_set_pte_present(mm, addr, ptep, pte)
+#define set_pte_atomic(ptep, pte)					\
+	native_set_pte_atomic(ptep, pte)
+
+#define set_pmd(pmdp, pmd)		native_set_pmd(pmdp, pmd)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define set_pgd(pgdp, pgd)		native_set_pgd(pgdp, pgd)
+#define pgd_clear(pgd)			native_pgd_clear(pgd)
+#endif
+
+#ifndef set_pud
+# define set_pud(pudp, pud)		native_set_pud(pudp, pud)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pud_clear(pud)			native_pud_clear(pud)
+#endif
+
+#define pte_clear(mm, addr, ptep)	native_pte_clear(mm, addr, ptep)
+#define pmd_clear(pmd)			native_pmd_clear(pmd)
+
+#define pte_update(mm, addr, ptep)              do { } while (0)
+#define pte_update_defer(mm, addr, ptep)        do { } while (0)
+
+static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
+{
+	native_pagetable_setup_start(base);
+}
+
+static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
+{
+	native_pagetable_setup_done(base);
+}
+
+#define pgd_val(x)	native_pgd_val(x)
+#define __pgd(x)	native_make_pgd(x)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define pud_val(x)	native_pud_val(x)
+#define __pud(x)	native_make_pud(x)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pmd_val(x)	native_pmd_val(x)
+#define __pmd(x)	native_make_pmd(x)
+#endif
+
+#define pte_val(x)	native_pte_val(x)
+#define __pte(x)	native_make_pte(x)
+
+#endif	/* CONFIG_PARAVIRT */
+
 /*
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
@@ -214,49 +274,6 @@ static inline int is_new_memtype_allowed(unsigned long flags,
 	return 1;
 }
 
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else  /* !CONFIG_PARAVIRT */
-#define set_pte(ptep, pte)		native_set_pte(ptep, pte)
-#define set_pte_at(mm, addr, ptep, pte)	native_set_pte_at(mm, addr, ptep, pte)
-
-#define set_pte_present(mm, addr, ptep, pte)				\
-	native_set_pte_present(mm, addr, ptep, pte)
-#define set_pte_atomic(ptep, pte)					\
-	native_set_pte_atomic(ptep, pte)
-
-#define set_pmd(pmdp, pmd)		native_set_pmd(pmdp, pmd)
-
-#ifndef __PAGETABLE_PUD_FOLDED
-#define set_pgd(pgdp, pgd)		native_set_pgd(pgdp, pgd)
-#define pgd_clear(pgd)			native_pgd_clear(pgd)
-#endif
-
-#ifndef set_pud
-# define set_pud(pudp, pud)		native_set_pud(pudp, pud)
-#endif
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define pud_clear(pud)			native_pud_clear(pud)
-#endif
-
-#define pte_clear(mm, addr, ptep)	native_pte_clear(mm, addr, ptep)
-#define pmd_clear(pmd)			native_pmd_clear(pmd)
-
-#define pte_update(mm, addr, ptep)              do { } while (0)
-#define pte_update_defer(mm, addr, ptep)        do { } while (0)
-
-static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
-{
-	native_pagetable_setup_start(base);
-}
-
-static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
-{
-	native_pagetable_setup_done(base);
-}
-#endif	/* CONFIG_PARAVIRT */
-
 #endif	/* __ASSEMBLY__ */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index ffaf1934068..2f59135c6f2 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -1,6 +1,22 @@
 #ifndef _ASM_X86_PGTABLE_64_DEFS_H
 #define _ASM_X86_PGTABLE_64_DEFS_H
 
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long	pteval_t;
+typedef unsigned long	pmdval_t;
+typedef unsigned long	pudval_t;
+typedef unsigned long	pgdval_t;
+typedef unsigned long	pgprotval_t;
+
+typedef struct { pteval_t pte; } pte_t;
+
+#endif	/* !__ASSEMBLY__ */
+
 #define SHARED_KERNEL_PMD	0
 
 /*
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index e5d5a8d3577..a7452f10930 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -162,9 +162,110 @@
 #define PGD_IDENT_ATTR	 0x001		/* PRESENT (no other attributes) */
 #endif
 
+#ifdef CONFIG_X86_32
+# include "pgtable_32_types.h"
+#else
+# include "pgtable_64_types.h"
+#endif
+
 #ifndef __ASSEMBLY__
 
+#include <linux/types.h>
+
+typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
+
+typedef struct { pgdval_t pgd; } pgd_t;
+
+static inline pgd_t native_make_pgd(pgdval_t val)
+{
+	return (pgd_t) { val };
+}
+
+static inline pgdval_t native_pgd_val(pgd_t pgd)
+{
+	return pgd.pgd;
+}
+
+static inline pgdval_t pgd_flags(pgd_t pgd)
+{
+	return native_pgd_val(pgd) & PTE_FLAGS_MASK;
+}
+
+#if PAGETABLE_LEVELS > 3
+typedef struct { pudval_t pud; } pud_t;
+
+static inline pud_t native_make_pud(pmdval_t val)
+{
+	return (pud_t) { val };
+}
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return pud.pud;
+}
+#else
+#include <asm-generic/pgtable-nopud.h>
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+	return native_pgd_val(pud.pgd);
+}
+#endif
+
+#if PAGETABLE_LEVELS > 2
+typedef struct { pmdval_t pmd; } pmd_t;
+
+static inline pmd_t native_make_pmd(pmdval_t val)
+{
+	return (pmd_t) { val };
+}
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return pmd.pmd;
+}
+#else
+#include <asm-generic/pgtable-nopmd.h>
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+	return native_pgd_val(pmd.pud.pgd);
+}
+#endif
+
+static inline pudval_t pud_flags(pud_t pud)
+{
+	return native_pud_val(pud) & PTE_FLAGS_MASK;
+}
+
+static inline pmdval_t pmd_flags(pmd_t pmd)
+{
+	return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+}
+
+static inline pte_t native_make_pte(pteval_t val)
+{
+	return (pte_t) { .pte = val };
+}
+
+static inline pteval_t native_pte_val(pte_t pte)
+{
+	return pte.pte;
+}
+
+static inline pteval_t pte_flags(pte_t pte)
+{
+	return native_pte_val(pte) & PTE_FLAGS_MASK;
+}
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+
+typedef struct page *pgtable_t;
+
 extern pteval_t __supported_pte_mask;
+extern int nx_enabled;
 
 #define pgprot_writecombine	pgprot_writecombine
 extern pgprot_t pgprot_writecombine(pgprot_t prot);
@@ -217,10 +318,4 @@ extern pte_t *lookup_address(unsigned long address, unsigned int *level);
 
 #endif	/* !__ASSEMBLY__ */
 
-#ifdef CONFIG_X86_32
-# include "pgtable_32_types.h"
-#else
-# include "pgtable_64_types.h"
-#endif
-
 #endif /* _ASM_X86_PGTABLE_DEFS_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 656d02ea509..96302880774 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -16,6 +16,7 @@ struct mm_struct;
 #include <asm/cpufeature.h>
 #include <asm/system.h>
 #include <asm/page.h>
+#include <asm/pgtable_types.h>
 #include <asm/percpu.h>
 #include <asm/msr.h>
 #include <asm/desc_defs.h>
-- 
cgit v1.2.3


From 744525092727827a9cf0044074db3e22dcf354fd Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Wed, 11 Feb 2009 16:31:40 -0800
Subject: x86: merge sys_rt_sigreturn between 32 and 64 bits

Impact: cleanup

With the recent changes in the 32-bit code to make system calls which
use struct pt_regs take a pointer, sys_rt_sigreturn() have become
identical between 32 and 64 bits, and both are empty wrappers around
do_rt_sigreturn().  Remove both wrappers and rename both to
sys_rt_sigreturn().

Cc: Brian Gerst <brgerst@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/syscalls.h |  2 +-
 arch/x86/kernel/signal.c        | 14 +-------------
 2 files changed, 2 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 77bb31a88ba..68b1be10cfa 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -40,7 +40,7 @@ asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
 int sys_sigaltstack(struct pt_regs *);
 unsigned long sys_sigreturn(struct pt_regs *);
-int sys_rt_sigreturn(struct pt_regs *);
+long sys_rt_sigreturn(struct pt_regs *);
 
 /* kernel/ioport.c */
 long sys_iopl(struct pt_regs *);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index ccfb27412f0..7cdcd16885e 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -601,7 +601,7 @@ badframe:
 }
 #endif /* CONFIG_X86_32 */
 
-static long do_rt_sigreturn(struct pt_regs *regs)
+long sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
 	unsigned long ax;
@@ -632,18 +632,6 @@ badframe:
 	return 0;
 }
 
-#ifdef CONFIG_X86_32
-int sys_rt_sigreturn(struct pt_regs *regs)
-{
-	return do_rt_sigreturn(regs);
-}
-#else /* !CONFIG_X86_32 */
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-{
-	return do_rt_sigreturn(regs);
-}
-#endif /* CONFIG_X86_32 */
-
 /*
  * OK, we're invoking a handler:
  */
-- 
cgit v1.2.3


From 58105ef1857112a186696c9b8957020090226a28 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sat, 31 Jan 2009 12:32:26 -0800
Subject: x86: UV: fix header struct usage

Impact: Fixes warning

Fix uv.h struct usage:

arch/x86/include/asm/uv/uv.h:16: warning: 'struct mm_struct' declared inside parameter list
arch/x86/include/asm/uv/uv.h:16: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/uv/uv.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 8ac1d7e312f..8242bf96581 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -3,6 +3,9 @@
 
 enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 
+struct cpumask;
+struct mm_struct;
+
 #ifdef CONFIG_X86_UV
 
 extern enum uv_system_type get_uv_system_type(void);
-- 
cgit v1.2.3


From f373e8c0639f1720d2d0fe414990f504e113c2ba Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Tue, 10 Feb 2009 21:02:08 +0100
Subject: [ARM] 5373/2: Add gpiolib support to AT91

Add support for gpiolib, including debugfs output, to the AT91 family.
The at91_get/set_gpio_value calls still exist since they are used by the
atmel serial driver.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                       |   1 +
 arch/arm/mach-at91/generic.h           |   3 -
 arch/arm/mach-at91/gpio.c              | 276 +++++++++++++++++++--------------
 arch/arm/mach-at91/include/mach/gpio.h |  28 +---
 4 files changed, 161 insertions(+), 147 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87f993..5e0c5ab9560 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -241,6 +241,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 7b9ce7a336b..b5daf7f5e01 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -47,9 +47,6 @@ extern void at91_irq_resume(void);
 #define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
 
 struct at91_gpio_bank {
-	unsigned chipbase;		/* bank's first GPIO number */
-	void __iomem *regbase;		/* base of register bank */
-	struct at91_gpio_bank *next;	/* bank sharing same IRQ/clock/... */
 	unsigned short id;		/* peripheral ID */
 	unsigned long offset;		/* offset from system peripheral base */
 	struct clk *clock;		/* associated clock */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 9b0447c3d59..028e4f7a88b 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -24,19 +24,59 @@
 #include <mach/at91_pio.h>
 #include <mach/gpio.h>
 
+#include <asm/gpio.h>
+
 #include "generic.h"
 
+struct at91_gpio_chip {
+	struct gpio_chip	chip;
+	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
+	struct at91_gpio_bank	*bank;		/* Bank definition */
+	void __iomem		*regbase;	/* Base of register bank */
+};
 
-static struct at91_gpio_bank *gpio;
-static int gpio_banks;
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val);
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset);
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
+
+#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.request	  = at91_gpiolib_request,	\
+			.direction_input  = at91_gpiolib_direction_input, \
+			.direction_output = at91_gpiolib_direction_output, \
+			.get		  = at91_gpiolib_get,		\
+			.set		  = at91_gpiolib_set,		\
+			.dbg_show	  = at91_gpiolib_dbg_show,	\
+			.base		  = base_gpio,			\
+			.ngpio		  = nr_gpio,			\
+		},							\
+	}
 
+static struct at91_gpio_chip gpio_chip[] = {
+	AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
+	AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+};
+
+static int gpio_banks;
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
 	pin -= PIN_BASE;
 	pin /= 32;
 	if (likely(pin < gpio_banks))
-		return gpio[pin].regbase;
+		return gpio_chip[pin].regbase;
 
 	return NULL;
 }
@@ -197,39 +237,6 @@ int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
 }
 EXPORT_SYMBOL(at91_set_multi_drive);
 
-/*--------------------------------------------------------------------------*/
-
-/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been
- * called, and maybe at91_set_multi_drive() for putout pins.
- */
-
-int gpio_direction_input(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
-		return -EINVAL;
-	__raw_writel(mask, pio + PIO_ODR);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
-		return -EINVAL;
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-	__raw_writel(mask, pio + PIO_OER);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*--------------------------------------------------------------------------*/
-
 /*
  * assuming the pin is muxed as a gpio output, set its value.
  */
@@ -282,7 +289,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state)
 	else
 		wakeups[bank] &= ~mask;
 
-	set_irq_wake(gpio[bank].id, state);
+	set_irq_wake(gpio_chip[bank].bank->id, state);
 
 	return 0;
 }
@@ -292,14 +299,14 @@ void at91_gpio_suspend(void)
 	int i;
 
 	for (i = 0; i < gpio_banks; i++) {
-		void __iomem	*pio = gpio[i].regbase;
+		void __iomem	*pio = gpio_chip[i].regbase;
 
 		backups[i] = __raw_readl(pio + PIO_IMR);
 		__raw_writel(backups[i], pio + PIO_IDR);
 		__raw_writel(wakeups[i], pio + PIO_IER);
 
 		if (!wakeups[i])
-			clk_disable(gpio[i].clock);
+			clk_disable(gpio_chip[i].bank->clock);
 		else {
 #ifdef CONFIG_PM_DEBUG
 			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -313,10 +320,10 @@ void at91_gpio_resume(void)
 	int i;
 
 	for (i = 0; i < gpio_banks; i++) {
-		void __iomem	*pio = gpio[i].regbase;
+		void __iomem	*pio = gpio_chip[i].regbase;
 
 		if (!wakeups[i])
-			clk_enable(gpio[i].clock);
+			clk_enable(gpio_chip[i].bank->clock);
 
 		__raw_writel(wakeups[i], pio + PIO_IDR);
 		__raw_writel(backups[i], pio + PIO_IER);
@@ -380,12 +387,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
 	unsigned	pin;
 	struct irq_desc	*gpio;
-	struct at91_gpio_bank *bank;
+	struct at91_gpio_chip *at91_gpio;
 	void __iomem	*pio;
 	u32		isr;
 
-	bank = get_irq_chip_data(irq);
-	pio = bank->regbase;
+	at91_gpio = get_irq_chip_data(irq);
+	pio = at91_gpio->regbase;
 
 	/* temporarily mask (level sensitive) parent IRQ */
 	desc->chip->ack(irq);
@@ -396,14 +403,14 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		 */
 		isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
 		if (!isr) {
-			if (!bank->next)
+			if (!at91_gpio->next)
 				break;
-			bank = bank->next;
-			pio = bank->regbase;
+			at91_gpio = at91_gpio->next;
+			pio = at91_gpio->regbase;
 			continue;
 		}
 
-		pin = bank->chipbase;
+		pin = at91_gpio->chip.base;
 		gpio = &irq_desc[pin];
 
 		while (isr) {
@@ -430,66 +437,6 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 
 /*--------------------------------------------------------------------------*/
 
-#ifdef CONFIG_DEBUG_FS
-
-static int at91_gpio_show(struct seq_file *s, void *unused)
-{
-	int bank, j;
-
-	/* print heading */
-	seq_printf(s, "Pin\t");
-	for (bank = 0; bank < gpio_banks; bank++) {
-		seq_printf(s, "PIO%c\t", 'A' + bank);
-	};
-	seq_printf(s, "\n\n");
-
-	/* print pin status */
-	for (j = 0; j < 32; j++) {
-		seq_printf(s, "%i:\t", j);
-
-		for (bank = 0; bank < gpio_banks; bank++) {
-			unsigned	pin  = PIN_BASE + (32 * bank) + j;
-			void __iomem	*pio = pin_to_controller(pin);
-			unsigned	mask = pin_to_mask(pin);
-
-			if (__raw_readl(pio + PIO_PSR) & mask)
-				seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
-			else
-				seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
-
-			seq_printf(s, "\t");
-		}
-
-		seq_printf(s, "\n");
-	}
-
-	return 0;
-}
-
-static int at91_gpio_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, at91_gpio_show, NULL);
-}
-
-static const struct file_operations at91_gpio_operations = {
-	.open		= at91_gpio_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init at91_gpio_debugfs_init(void)
-{
-	/* /sys/kernel/debug/at91_gpio */
-	(void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
-	return 0;
-}
-postcore_initcall(at91_gpio_debugfs_init);
-
-#endif
-
-/*--------------------------------------------------------------------------*/
-
 /* This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
@@ -501,20 +448,20 @@ static struct lock_class_key gpio_lock_class;
 void __init at91_gpio_irq_setup(void)
 {
 	unsigned		pioc, pin;
-	struct at91_gpio_bank	*this, *prev;
+	struct at91_gpio_chip	*this, *prev;
 
-	for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+	for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
 			pioc++ < gpio_banks;
 			prev = this, this++) {
-		unsigned	id = this->id;
+		unsigned	id = this->bank->id;
 		unsigned	i;
 
 		/* enable PIO controller's clock */
-		clk_enable(this->clock);
+		clk_enable(this->bank->clock);
 
 		__raw_writel(~0, this->regbase + PIO_IDR);
 
-		for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+		for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
 			lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
 
 			/*
@@ -539,25 +486,114 @@ void __init at91_gpio_irq_setup(void)
 	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
 }
 
+/* gpiolib support */
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + PIO_ODR);
+	return 0;
+}
+
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+	__raw_writel(mask, pio + PIO_OER);
+	return 0;
+}
+
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+	u32 pdsr;
+
+	pdsr = __raw_readl(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned pin = chip->base + offset;
+	void __iomem *pio = pin_to_controller(pin);
+	unsigned mask = pin_to_mask(pin);
+
+	/* Cannot request GPIOs that are in alternate function mode */
+	if (!(__raw_readl(pio + PIO_PSR) & mask))
+		return -EPERM;
+
+	return 0;
+}
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		unsigned pin = chip->base + i;
+		void __iomem *pio = pin_to_controller(pin);
+		unsigned mask = pin_to_mask(pin);
+		const char *gpio_label;
+
+		gpio_label = gpiochip_is_requested(chip, i);
+		if (gpio_label) {
+			seq_printf(s, "[%s] GPIO%s%d: ",
+				   gpio_label, chip->label, i);
+			if (__raw_readl(pio + PIO_PSR) & mask)
+				seq_printf(s, "[gpio] %s\n",
+					   at91_get_gpio_value(pin) ?
+					   "set" : "clear");
+			else
+				seq_printf(s, "[periph %s]\n",
+					   __raw_readl(pio + PIO_ABSR) &
+					   mask ? "B" : "A");
+		}
+	}
+}
+
 /*
  * Called from the processor-specific init to enable GPIO pin support.
  */
 void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
 {
 	unsigned		i;
-	struct at91_gpio_bank	*last;
+	struct at91_gpio_chip *at91_gpio, *last = NULL;
 
 	BUG_ON(nr_banks > MAX_GPIO_BANKS);
 
-	gpio = data;
 	gpio_banks = nr_banks;
 
-	for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
-		data->chipbase = PIN_BASE + i * 32;
-		data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+	for (i = 0; i < nr_banks; i++) {
+		at91_gpio = &gpio_chip[i];
+
+		at91_gpio->bank = &data[i];
+		at91_gpio->chip.base = PIN_BASE + i * 32;
+		at91_gpio->regbase = at91_gpio->bank->offset +
+			(void __iomem *)AT91_VA_BASE_SYS;
 
 		/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
-		if (last && last->id == data->id)
-			last->next = data;
+		if (last && last->bank->id == at91_gpio->bank->id)
+			last->next = at91_gpio;
+		last = at91_gpio;
+
+		gpiochip_add(&at91_gpio->chip);
 	}
 }
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index bffa6741a75..04c91e31c9c 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -213,32 +213,12 @@ extern void at91_gpio_resume(void);
  */
 
 #include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	at91_set_gpio_value(gpio, value);
-}
-
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
 static inline int gpio_to_irq(unsigned gpio)
 {
 	return gpio;
-- 
cgit v1.2.3


From 3d1228ead618b88e8606015cbabc49019981805d Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 11 Feb 2009 13:12:56 +0100
Subject: [ARM] 5387/1: Add ptrace VFP support on ARM

This patch adds ptrace support for setting and getting the VFP registers
using PTRACE_SETVFPREGS and PTRACE_GETVFPREGS. The user_vfp structure
defined in asm/user.h contains 32 double registers (to cover VFPv3 and
Neon hardware) and the FPSCR register.

Cc: Paul Brook <paul@codesourcery.com>
Cc: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/ptrace.h      |  2 ++
 arch/arm/include/asm/thread_info.h |  2 ++
 arch/arm/include/asm/user.h        |  9 ++++++
 arch/arm/kernel/ptrace.c           | 58 ++++++++++++++++++++++++++++++++++++++
 arch/arm/vfp/vfp.h                 |  2 --
 arch/arm/vfp/vfphw.S               |  2 --
 arch/arm/vfp/vfpmodule.c           | 49 ++++++++++++++++++++++++++++++++
 7 files changed, 120 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 73192618f1c..236a06b9b7c 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -27,6 +27,8 @@
 /* PTRACE_SYSCALL is 24 */
 #define PTRACE_GETCRUNCHREGS	25
 #define PTRACE_SETCRUNCHREGS	26
+#define PTRACE_GETVFPREGS	27
+#define PTRACE_SETVFPREGS	28
 
 /*
  * PSR bits
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 68b9ec82a37..b9dc8a84257 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -113,6 +113,8 @@ extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
 extern void iwmmxt_task_switch(struct thread_info *);
 
+extern void vfp_sync_state(struct thread_info *thread);
+
 #endif
 
 /*
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index 825c1e7c582..df95e050f9d 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -81,4 +81,13 @@ struct user{
 #define HOST_TEXT_START_ADDR (u.start_code)
 #define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 
+/*
+ * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
+ * are ignored by the ptrace system call.
+ */
+struct user_vfp {
+	unsigned long long fpregs[32];
+	unsigned long fpscr;
+};
+
 #endif /* _ARM_USER_H */
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index df653ea5925..89882a1d018 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -653,6 +653,54 @@ static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
 }
 #endif
 
+#ifdef CONFIG_VFP
+/*
+ * Get the child VFP state.
+ */
+static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
+{
+	struct thread_info *thread = task_thread_info(tsk);
+	union vfp_state *vfp = &thread->vfpstate;
+	struct user_vfp __user *ufp = data;
+
+	vfp_sync_state(thread);
+
+	/* copy the floating point registers */
+	if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
+			 sizeof(vfp->hard.fpregs)))
+		return -EFAULT;
+
+	/* copy the status and control register */
+	if (put_user(vfp->hard.fpscr, &ufp->fpscr))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Set the child VFP state.
+ */
+static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
+{
+	struct thread_info *thread = task_thread_info(tsk);
+	union vfp_state *vfp = &thread->vfpstate;
+	struct user_vfp __user *ufp = data;
+
+	vfp_sync_state(thread);
+
+	/* copy the floating point registers */
+	if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
+			   sizeof(vfp->hard.fpregs)))
+		return -EFAULT;
+
+	/* copy the status and control register */
+	if (get_user(vfp->hard.fpscr, &ufp->fpscr))
+		return -EFAULT;
+
+	return 0;
+}
+#endif
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
@@ -775,6 +823,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 #endif
 
+#ifdef CONFIG_VFP
+		case PTRACE_GETVFPREGS:
+			ret = ptrace_getvfpregs(child, (void __user *)data);
+			break;
+
+		case PTRACE_SETVFPREGS:
+			ret = ptrace_setvfpregs(child, (void __user *)data);
+			break;
+#endif
+
 		default:
 			ret = ptrace_request(child, request, addr, data);
 			break;
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 8de86e4fead..c8c98dd44ad 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -377,6 +377,4 @@ struct op {
 	u32 flags;
 };
 
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
 extern void vfp_save_state(void *location, u32 fpexc);
-#endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index c92a08bd6a8..a5a4e57763c 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -172,7 +172,6 @@ process_exception:
 					@ retry the faulted instruction
 ENDPROC(vfp_support_entry)
 
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
 ENTRY(vfp_save_state)
 	@ Save the current VFP state
 	@ r0 - save location
@@ -190,7 +189,6 @@ ENTRY(vfp_save_state)
 	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
 	mov	pc, lr
 ENDPROC(vfp_save_state)
-#endif
 
 last_VFP_context_address:
 	.word	last_VFP_context
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 9f476a1be2c..7e1239041b3 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -377,6 +377,55 @@ static void vfp_pm_init(void)
 static inline void vfp_pm_init(void) { }
 #endif /* CONFIG_PM */
 
+/*
+ * Synchronise the hardware VFP state of a thread other than current with the
+ * saved one. This function is used by the ptrace mechanism.
+ */
+#ifdef CONFIG_SMP
+void vfp_sync_state(struct thread_info *thread)
+{
+	/*
+	 * On SMP systems, the VFP state is automatically saved at every
+	 * context switch. We mark the thread VFP state as belonging to a
+	 * non-existent CPU so that the saved one will be reloaded when
+	 * needed.
+	 */
+	thread->vfpstate.hard.cpu = NR_CPUS;
+}
+#else
+void vfp_sync_state(struct thread_info *thread)
+{
+	unsigned int cpu = get_cpu();
+	u32 fpexc = fmrx(FPEXC);
+
+	/*
+	 * If VFP is enabled, the previous state was already saved and
+	 * last_VFP_context updated.
+	 */
+	if (fpexc & FPEXC_EN)
+		goto out;
+
+	if (!last_VFP_context[cpu])
+		goto out;
+
+	/*
+	 * Save the last VFP state on this CPU.
+	 */
+	fmxr(FPEXC, fpexc | FPEXC_EN);
+	vfp_save_state(last_VFP_context[cpu], fpexc);
+	fmxr(FPEXC, fpexc);
+
+	/*
+	 * Set the context to NULL to force a reload the next time the thread
+	 * uses the VFP.
+	 */
+	last_VFP_context[cpu] = NULL;
+
+out:
+	put_cpu();
+}
+#endif
+
 #include <linux/smp.h>
 
 /*
-- 
cgit v1.2.3


From 7279dc3e914635ab4b288ec39383272a06c466f3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 11 Feb 2009 13:13:56 +0100
Subject: [ARM] 5388/1: Add hwcap bits for VFPv3 and VFPv3D16

The VFPv3D16 is a VFPv3 CPU configuration where only 16 double registers
are present, as the VFPv2 configuration. This patch adds the
corresponding hwcap bits so that applications or debuggers have more
information about the supported features.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/hwcap.h |  2 ++
 arch/arm/kernel/setup.c      |  2 ++
 arch/arm/vfp/vfpmodule.c     | 12 ++++++++++++
 3 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index bda489f9f01..f7bd52b1c36 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -17,6 +17,8 @@
 #define HWCAP_CRUNCH	1024
 #define HWCAP_THUMBEE	2048
 #define HWCAP_NEON	4096
+#define HWCAP_VFPv3	8192
+#define HWCAP_VFPv3D16	16384
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 7049815d66d..645ec743668 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -779,6 +779,8 @@ static const char *hwcap_str[] = {
 	"crunch",
 	"thumbee",
 	"neon",
+	"vfpv3",
+	"vfpv3d16",
 	NULL
 };
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 7e1239041b3..75457b30d81 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -476,6 +476,18 @@ static int __init vfp_init(void)
 		 * in place; report VFP support to userspace.
 		 */
 		elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_VFPv3
+		if (VFP_arch >= 3) {
+			elf_hwcap |= HWCAP_VFPv3;
+
+			/*
+			 * Check for VFPv3 D16. CPUs in this configuration
+			 * only have 16 x 64bit registers.
+			 */
+			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
+				elf_hwcap |= HWCAP_VFPv3D16;
+		}
+#endif
 #ifdef CONFIG_NEON
 		/*
 		 * Check for the presence of the Advanced SIMD
-- 
cgit v1.2.3


From e9fc78230cb77647eb79d4b2f7c4d6c070f611f1 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 11 Feb 2009 13:14:57 +0100
Subject: [ARM] 5389/1: Make sure the pmd entries are visible by the secondary
 CPU

The __cpu_up() function in arch/arm/kernel/smp.c sets the pmd entries
without flushing or cleaning them.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 55fa7ff96a3..7801aac3c04 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -93,6 +93,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+	flush_pmd_entry(pmd);
 
 	/*
 	 * We need to tell the secondary core where to find
@@ -130,6 +131,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.pgdir = 0;
 
 	*pmd = __pmd(0);
+	clean_pmd_entry(pmd);
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
-- 
cgit v1.2.3


From 9ee8c9f0124dd70779c400459d57bdbbed60fcfe Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 12 Feb 2009 02:56:04 +0100
Subject: [ARM] 5392/1: Delete redundant macros for w90p910

Delete the macros W90X900_RES and W90X900_DEVICE
I thought it will be better to define the structures
for each device directly.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/cpu.h | 22 ----------------------
 1 file changed, 22 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 001d50915e3..de29ddcb945 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -46,28 +46,6 @@ extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
 
-#define W90X900_RES(name)				\
-struct resource w90x900_##name##_resource[] = {		\
-	[0] = {						\
-		.start = name##_PA,			\
-		.end   = name##_PA + 0x0ff,		\
-		.flags = IORESOURCE_MEM,		\
-	},						\
-	[1] = {						\
-		.start = IRQ_##name,			\
-		.end   = IRQ_##name,			\
-		.flags = IORESOURCE_IRQ,		\
-	}						\
-}
-
-#define W90X900_DEVICE(devname, regname, devid, platdevname)		\
-struct platform_device w90x900_##devname = {				\
-	.name		= platdevname,					\
-	.id		= devid,					\
-	.num_resources 	= ARRAY_SIZE(w90x900_##regname##_resource),	\
-	.resource 	= w90x900_##regname##_resource,			\
-}
-
 #define W90X900_8250PORT(name)					\
 {								\
 	.membase	= name##_BA,				\
-- 
cgit v1.2.3


From a12370f12fdc6a35463842e41eaf04299167eb12 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 12 Feb 2009 02:57:21 +0100
Subject: [ARM] 5393/1: Add W90P910 EVB NOR flash driver

Add W90P910 Evaluate Board NOR flash driver support,
The EV Board default support W19B320ABT7H of Winbond inc.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 48 +++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 542527019b6..726ff6798a5 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -22,6 +22,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,6 +33,52 @@
 #include <mach/map.h>
 
 #include "cpu.h"
+/*w90p910 evb norflash driver data */
+
+#define W90P910_FLASH_BASE	0xA0000000
+#define W90P910_FLASH_SIZE	0x400000
+
+static struct mtd_partition w90p910_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
+};
+
+static struct physmap_flash_data w90p910_flash_data = {
+	.width		=	2,
+	.parts		=	w90p910_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
+};
+
+static struct resource w90p910_flash_resources[] = {
+	{
+		.start	=	W90P910_FLASH_BASE,
+		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device w90p910_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &w90p910_flash_data,
+			},
+	.resource	=	w90p910_flash_resources,
+	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
+};
 
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
@@ -40,6 +87,7 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 
 static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_serial_device,
+	&w90p910_flash_device,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From bc8bd002b8371ece81c9adbdce49d7e68f0a0cbc Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 12:43:52 +0100
Subject: x86, defconfig: update the 32-bit defconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/configs/i386_defconfig | 406 ++++++++++++++++++++++++++++++++--------
 1 file changed, 324 insertions(+), 82 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index edba00d98ac..c3186ccc936 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Sep  3 17:23:09 2008
+# Linux kernel version: 2.6.29-rc4
+# Thu Feb 12 12:42:50 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-# CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_CLOCKSOURCE_WATCHDOG=y
@@ -24,16 +23,14 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_GPIO is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_GENERIC_TIME_VSYSCALL is not set
 CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
@@ -42,12 +39,12 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_ZONE_DMA32 is not set
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 # CONFIG_AUDIT_ARCH is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_32_SMP=y
 CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
@@ -76,30 +73,44 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 # CONFIG_CGROUP_MEM_RES_CTLR is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_USER_NS=y
 CONFIG_PID_NS=y
+CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -124,12 +135,15 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
@@ -139,15 +153,10 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -155,12 +164,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,7 +183,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Processor type and features
@@ -186,6 +193,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
@@ -194,7 +202,7 @@ CONFIG_X86_PC=y
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
@@ -238,10 +246,19 @@ CONFIG_X86_TSC=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_X86_DS=y
+CONFIG_X86_PTRACE_BTS=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_IOMMU_API is not set
 CONFIG_NR_CPUS=64
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
@@ -250,12 +267,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
 # CONFIG_X86_MCE is not set
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
 CONFIG_X86_REBOOTFIXUPS=y
 CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -264,6 +284,7 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -274,14 +295,17 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HIGHPTE=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW_64K=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
@@ -302,10 +326,11 @@ CONFIG_PHYSICAL_START=0x1000000
 CONFIG_PHYSICAL_ALIGN=0x200000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 
 #
-# Power management options
+# Power management and ACPI options
 #
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
@@ -331,19 +356,13 @@ CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
 # CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
@@ -388,7 +407,6 @@ CONFIG_X86_ACPI_CPUFREQ=y
 #
 # shared options
 #
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
 # CONFIG_X86_SPEEDSTEP_LIB is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
@@ -415,6 +433,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
 CONFIG_ISA_DMA_API=y
 # CONFIG_ISA is not set
@@ -452,13 +471,17 @@ CONFIG_HOTPLUG_PCI=y
 # Executable file formats / Emulations
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
+CONFIG_HAVE_ATOMIC_IOMAP=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -519,7 +542,6 @@ CONFIG_DEFAULT_CUBIC=y
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -557,19 +579,21 @@ CONFIG_NF_CONNTRACK_IRC=y
 CONFIG_NF_CONNTRACK_SIP=y
 CONFIG_NF_CT_NETLINK=y
 CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_MARK=y
 CONFIG_NETFILTER_XT_TARGET_NFLOG=y
 CONFIG_NETFILTER_XT_TARGET_SECMARK=y
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
 CONFIG_NETFILTER_XT_MATCH_MARK=y
 CONFIG_NETFILTER_XT_MATCH_POLICY=y
 CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=y
 CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=y
@@ -595,8 +619,8 @@ CONFIG_IP_NF_MANGLE=y
 CONFIG_NF_CONNTRACK_IPV6=y
 CONFIG_IP6_NF_IPTABLES=y
 CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_REJECT=y
 CONFIG_IP6_NF_MANGLE=y
 # CONFIG_IP_DCCP is not set
@@ -604,6 +628,7 @@ CONFIG_IP6_NF_MANGLE=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
@@ -623,6 +648,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -630,6 +656,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -644,6 +671,7 @@ CONFIG_NET_CLS=y
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
 # CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 # CONFIG_NET_EMATCH_CMP is not set
@@ -659,7 +687,9 @@ CONFIG_NET_CLS_ACT=y
 # CONFIG_NET_ACT_NAT is not set
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -676,29 +706,33 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -722,7 +756,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+CONFIG_PNP_DEBUG_MESSAGES=y
 
 #
 # Protocols
@@ -750,20 +784,19 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_TC1100_WMI is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -875,6 +908,7 @@ CONFIG_PATA_OLDPIIX=y
 CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 # CONFIG_MD_LINEAR is not set
 # CONFIG_MD_RAID0 is not set
 # CONFIG_MD_RAID1 is not set
@@ -930,6 +964,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -953,6 +990,9 @@ CONFIG_NET_TULIP=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -960,7 +1000,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
 # CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -974,15 +1013,16 @@ CONFIG_8139TOO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -1000,18 +1040,23 @@ CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
@@ -1025,9 +1070,8 @@ CONFIG_TR=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
@@ -1044,6 +1088,8 @@ CONFIG_WLAN_80211=y
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_IWLAGN is not set
@@ -1054,6 +1100,10 @@ CONFIG_ATH5K=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
 #
 # USB Network Adapters
 #
@@ -1062,6 +1112,7 @@ CONFIG_ATH5K=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -1123,6 +1174,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -1160,15 +1212,16 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1179,6 +1232,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
 
 #
@@ -1245,6 +1299,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -1279,6 +1334,7 @@ CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
@@ -1331,8 +1387,6 @@ CONFIG_I2C_I801=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1351,8 +1405,78 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1372,6 +1496,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_I6300ESB_WDT is not set
 # CONFIG_ITCO_WDT is not set
 # CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
 # CONFIG_HP_WATCHDOG is not set
 # CONFIG_SC1200_WDT is not set
 # CONFIG_PC87413_WDT is not set
@@ -1379,9 +1504,11 @@ CONFIG_WATCHDOG=y
 # CONFIG_SBC8360_WDT is not set
 # CONFIG_SBC7240_WDT is not set
 # CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
 # CONFIG_SMSC37B787_WDT is not set
 # CONFIG_W83627HF_WDT is not set
 # CONFIG_W83697HF_WDT is not set
+# CONFIG_W83697UG_WDT is not set
 # CONFIG_W83877F_WDT is not set
 # CONFIG_W83977F_WDT is not set
 # CONFIG_MACHZ_WDT is not set
@@ -1397,11 +1524,11 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1410,7 +1537,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1450,6 +1583,7 @@ CONFIG_DRM=y
 # CONFIG_DRM_I810 is not set
 # CONFIG_DRM_I830 is not set
 CONFIG_DRM_I915=y
+# CONFIG_DRM_I915_KMS is not set
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
@@ -1459,6 +1593,7 @@ CONFIG_DRM_I915=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1487,7 +1622,6 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_VESA is not set
 CONFIG_FB_EFI=y
-# CONFIG_FB_IMAC is not set
 # CONFIG_FB_N411 is not set
 # CONFIG_FB_HGA is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -1503,6 +1637,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -1515,12 +1650,15 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 # CONFIG_BACKLIGHT_PROGEAR is not set
 # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
 
 #
 # Display device support
@@ -1540,10 +1678,12 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 CONFIG_SND_HWDEP=y
+CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
 CONFIG_SND_OSSEMUL=y
@@ -1551,6 +1691,8 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1605,11 +1747,16 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_FM801 is not set
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_HDA_CODEC_CMEDIA=y
 CONFIG_SND_HDA_CODEC_SI3054=y
@@ -1643,6 +1790,7 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
 CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
@@ -1657,15 +1805,37 @@ CONFIG_HIDRAW=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-CONFIG_HID_FF=y
 CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
 CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HIDDEV=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1683,6 +1853,8 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1691,6 +1863,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1700,6 +1873,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1707,20 +1882,20 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1728,7 +1903,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1749,6 +1923,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1766,7 +1941,13 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1775,6 +1956,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
@@ -1785,6 +1967,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
@@ -1824,6 +2007,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1833,12 +2017,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1851,6 +2038,22 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_INTEL_IOATDMA is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_TC1100_WMI is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=y
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
 
 #
 # Firmware Drivers
@@ -1872,21 +2075,24 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1920,16 +2126,14 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1939,6 +2143,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1960,6 +2165,7 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2066,33 +2272,54 @@ CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_HW_BRANCH_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_HW_BRANCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -2123,8 +2350,10 @@ CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2135,7 +2364,6 @@ CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
 CONFIG_CRYPTO=y
@@ -2143,11 +2371,18 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -2182,6 +2417,7 @@ CONFIG_CRYPTO_HMAC=y
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -2222,6 +2458,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_PADLOCK is not set
 # CONFIG_CRYPTO_DEV_GEODE is not set
@@ -2239,6 +2480,7 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-- 
cgit v1.2.3


From dd5fc55449c5e7e4f008d7d26cda9e6e2bc94980 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 12:48:48 +0100
Subject: x86, defconfig: update the 64-bit defconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/configs/x86_64_defconfig | 412 ++++++++++++++++++++++++++++++--------
 1 file changed, 332 insertions(+), 80 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 322dd2748fc..4c85bfa58e1 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Sep  3 17:13:39 2008
+# Linux kernel version: 2.6.29-rc4
+# Thu Feb 12 12:48:13 2009
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-# CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_CLOCKSOURCE_WATCHDOG=y
@@ -23,17 +22,16 @@ CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
 CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_GPIO is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
@@ -42,12 +40,12 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ZONE_DMA32=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_64_SMP=y
 CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
@@ -76,30 +74,44 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 # CONFIG_CGROUP_MEM_RES_CTLR is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_USER_NS=y
 CONFIG_PID_NS=y
+CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -124,12 +136,15 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
@@ -139,15 +154,10 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -155,7 +165,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
@@ -175,7 +184,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Processor type and features
@@ -185,6 +194,8 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
@@ -192,6 +203,7 @@ CONFIG_X86_PC=y
 # CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
@@ -230,6 +242,11 @@ CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_X86_DS=y
+CONFIG_X86_PTRACE_BTS=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_DMI=y
@@ -237,8 +254,11 @@ CONFIG_GART_IOMMU=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
 CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
+CONFIG_IOMMU_API=y
+# CONFIG_MAXSMP is not set
 CONFIG_NR_CPUS=64
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
@@ -247,12 +267,17 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
 # CONFIG_X86_MCE is not set
 # CONFIG_I8K is not set
 CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
 CONFIG_NUMA=y
 CONFIG_K8_NUMA=y
 CONFIG_X86_64_ACPI_NUMA=y
@@ -269,7 +294,6 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
@@ -280,10 +304,14 @@ CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW_64K=y
 CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set
 CONFIG_X86_PAT=y
@@ -302,11 +330,12 @@ CONFIG_PHYSICAL_START=0x1000000
 CONFIG_PHYSICAL_ALIGN=0x200000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 
 #
-# Power management options
+# Power management and ACPI options
 #
 CONFIG_ARCH_HIBERNATION_HEADER=y
 CONFIG_PM=y
@@ -333,20 +362,14 @@ CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_NUMA=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
 # CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
@@ -381,12 +404,16 @@ CONFIG_X86_ACPI_CPUFREQ=y
 #
 # shared options
 #
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
 # CONFIG_X86_SPEEDSTEP_LIB is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
 
+#
+# Memory power savings
+#
+# CONFIG_I7300_IDLE is not set
+
 #
 # Bus options (PCI etc.)
 #
@@ -395,8 +422,10 @@ CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_DMAR=y
+# CONFIG_DMAR_DEFAULT_ON is not set
 CONFIG_DMAR_GFX_WA=y
 CONFIG_DMAR_FLOPPY_WA=y
+# CONFIG_INTR_REMAP is not set
 CONFIG_PCIEPORTBUS=y
 # CONFIG_HOTPLUG_PCI_PCIE is not set
 CONFIG_PCIEAER=y
@@ -405,6 +434,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
 CONFIG_ISA_DMA_API=y
 CONFIG_K8_NB=y
@@ -438,6 +468,8 @@ CONFIG_HOTPLUG_PCI=y
 #
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_IA32_EMULATION=y
 # CONFIG_IA32_AOUT is not set
@@ -449,6 +481,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -509,7 +542,6 @@ CONFIG_DEFAULT_CUBIC=y
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -547,19 +579,21 @@ CONFIG_NF_CONNTRACK_IRC=y
 CONFIG_NF_CONNTRACK_SIP=y
 CONFIG_NF_CT_NETLINK=y
 CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_MARK=y
 CONFIG_NETFILTER_XT_TARGET_NFLOG=y
 CONFIG_NETFILTER_XT_TARGET_SECMARK=y
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
 CONFIG_NETFILTER_XT_MATCH_MARK=y
 CONFIG_NETFILTER_XT_MATCH_POLICY=y
 CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=y
 CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=y
@@ -585,8 +619,8 @@ CONFIG_IP_NF_MANGLE=y
 CONFIG_NF_CONNTRACK_IPV6=y
 CONFIG_IP6_NF_IPTABLES=y
 CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
 CONFIG_IP6_NF_TARGET_REJECT=y
 CONFIG_IP6_NF_MANGLE=y
 # CONFIG_IP_DCCP is not set
@@ -594,6 +628,7 @@ CONFIG_IP6_NF_MANGLE=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
@@ -613,6 +648,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -620,6 +656,7 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -634,6 +671,7 @@ CONFIG_NET_CLS=y
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
 # CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 # CONFIG_NET_EMATCH_CMP is not set
@@ -649,7 +687,9 @@ CONFIG_NET_CLS_ACT=y
 # CONFIG_NET_ACT_NAT is not set
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -666,29 +706,33 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -712,7 +756,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+CONFIG_PNP_DEBUG_MESSAGES=y
 
 #
 # Protocols
@@ -740,21 +784,21 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_SGI_XP is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_SGI_GRU is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -864,6 +908,7 @@ CONFIG_PATA_OLDPIIX=y
 CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 # CONFIG_MD_LINEAR is not set
 # CONFIG_MD_RAID0 is not set
 # CONFIG_MD_RAID1 is not set
@@ -919,6 +964,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -942,6 +990,9 @@ CONFIG_NET_TULIP=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -949,7 +1000,6 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
 # CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -963,15 +1013,16 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -989,18 +1040,23 @@ CONFIG_TIGON3=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
@@ -1013,9 +1069,8 @@ CONFIG_TR=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 # CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
@@ -1032,6 +1087,8 @@ CONFIG_WLAN_80211=y
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_IWLAGN is not set
@@ -1042,6 +1099,10 @@ CONFIG_ATH5K=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
 #
 # USB Network Adapters
 #
@@ -1050,6 +1111,7 @@ CONFIG_ATH5K=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -1059,6 +1121,7 @@ CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_IBMTR is not set
 # CONFIG_WAN is not set
 CONFIG_FDDI=y
 # CONFIG_DEFXX is not set
@@ -1110,6 +1173,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -1147,15 +1211,16 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1165,6 +1230,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
 
 #
@@ -1231,6 +1297,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -1260,6 +1327,7 @@ CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
@@ -1311,8 +1379,6 @@ CONFIG_I2C_I801=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1331,8 +1397,78 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1352,15 +1488,18 @@ CONFIG_WATCHDOG=y
 # CONFIG_I6300ESB_WDT is not set
 # CONFIG_ITCO_WDT is not set
 # CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
 # CONFIG_HP_WATCHDOG is not set
 # CONFIG_SC1200_WDT is not set
 # CONFIG_PC87413_WDT is not set
 # CONFIG_60XX_WDT is not set
 # CONFIG_SBC8360_WDT is not set
 # CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
 # CONFIG_SMSC37B787_WDT is not set
 # CONFIG_W83627HF_WDT is not set
 # CONFIG_W83697HF_WDT is not set
+# CONFIG_W83697UG_WDT is not set
 # CONFIG_W83877F_WDT is not set
 # CONFIG_W83977F_WDT is not set
 # CONFIG_MACHZ_WDT is not set
@@ -1376,11 +1515,11 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1389,7 +1528,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1423,6 +1568,7 @@ CONFIG_DRM=y
 # CONFIG_DRM_I810 is not set
 # CONFIG_DRM_I830 is not set
 CONFIG_DRM_I915=y
+CONFIG_DRM_I915_KMS=y
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
@@ -1432,6 +1578,7 @@ CONFIG_DRM_I915=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1460,7 +1607,6 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_VESA is not set
 CONFIG_FB_EFI=y
-# CONFIG_FB_IMAC is not set
 # CONFIG_FB_N411 is not set
 # CONFIG_FB_HGA is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -1475,6 +1621,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -1486,12 +1633,15 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 # CONFIG_BACKLIGHT_PROGEAR is not set
 # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
 
 #
 # Display device support
@@ -1511,10 +1661,12 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 CONFIG_SND_HWDEP=y
+CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
 CONFIG_SND_OSSEMUL=y
@@ -1522,6 +1674,8 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1575,11 +1729,16 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_FM801 is not set
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_HDA_CODEC_CMEDIA=y
 CONFIG_SND_HDA_CODEC_SI3054=y
@@ -1612,6 +1771,7 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
 CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
@@ -1626,15 +1786,37 @@ CONFIG_HIDRAW=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-CONFIG_HID_FF=y
 CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
 CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HIDDEV=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1652,6 +1834,8 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1660,6 +1844,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1669,6 +1854,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1676,20 +1863,20 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1697,7 +1884,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1718,6 +1904,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1735,7 +1922,13 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1744,6 +1937,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
@@ -1754,6 +1948,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
@@ -1793,6 +1988,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1802,12 +1998,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1820,6 +2019,21 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_INTEL_IOATDMA is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=y
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
 
 #
 # Firmware Drivers
@@ -1841,22 +2055,25 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1890,16 +2107,14 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1909,6 +2124,7 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1930,6 +2146,7 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2035,40 +2252,60 @@ CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_HW_BRANCH_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_HW_BRANCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
-# CONFIG_DIRECT_GBPAGES is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_IOMMU_DEBUG is not set
@@ -2092,8 +2329,10 @@ CONFIG_OPTIMIZE_INLINING=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2104,7 +2343,6 @@ CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
 CONFIG_CRYPTO=y
@@ -2112,11 +2350,18 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -2151,6 +2396,7 @@ CONFIG_CRYPTO_HMAC=y
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -2191,6 +2437,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_HAVE_KVM=y
@@ -2205,6 +2456,7 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-- 
cgit v1.2.3


From 556831063bcf8fd818e92227c40e3eaabe759bab Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 12:51:29 +0100
Subject: x86, defconfig: turn off CONFIG_ENABLE_WARN_DEPRECATED
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

deprecation warnings have become rather noisy lately:

drivers/i2c/i2c-core.c: In function ‘i2c_new_device’:
drivers/i2c/i2c-core.c:283: warning: ‘i2c_attach_client’ is deprecated (declared at include/linux/i2c.h:434)
drivers/i2c/i2c-core.c: In function ‘i2c_del_adapter’:
drivers/i2c/i2c-core.c:646: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: In function ‘i2c_register_driver’:
drivers/i2c/i2c-core.c:713: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: In function ‘__detach_adapter’:
drivers/i2c/i2c-core.c:780: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: At top level:
drivers/i2c/i2c-core.c:876: warning: ‘i2c_attach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:827)
drivers/i2c/i2c-core.c:876: warning: ‘i2c_attach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:827)
drivers/i2c/i2c-core.c:904: warning: ‘i2c_detach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:879)
drivers/i2c/i2c-core.c:904: warning: ‘i2c_detach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:879)

So turn it off for now - these reminders can obscure critical warnings.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/configs/i386_defconfig   | 3 +--
 arch/x86/configs/x86_64_defconfig | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index c3186ccc936..0562a36f74d 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -2242,8 +2242,7 @@ CONFIG_NLS_UTF8=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 4c85bfa58e1..06633483b29 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -2223,8 +2223,7 @@ CONFIG_NLS_UTF8=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-- 
cgit v1.2.3


From bd282422fe9566a89bc34af325efb6d2701903be Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 12:59:05 +0100
Subject: x86, defconfig: turn off CONFIG_SCSI_ISCSI_ATTRS=y

It was enabled by mistake - iscsi is not included in a typical
default PC, and no other architecture has it built-in (=y) either.

Turn it off.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/configs/i386_defconfig   | 8 ++++----
 arch/x86/configs/x86_64_defconfig | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 0562a36f74d..8f40a80ccb5 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.29-rc4
-# Thu Feb 12 12:42:50 2009
+# Thu Feb 12 12:57:57 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -835,7 +835,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
@@ -2064,8 +2064,7 @@ CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+# CONFIG_ISCSI_IBFT_FIND is not set
 
 #
 # File systems
@@ -2243,6 +2242,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 06633483b29..10728fd91c6 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.29-rc4
-# Thu Feb 12 12:48:13 2009
+# Thu Feb 12 12:57:29 2009
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
@@ -837,7 +837,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
@@ -2044,8 +2044,7 @@ CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+# CONFIG_ISCSI_IBFT_FIND is not set
 
 #
 # File systems
@@ -2224,6 +2223,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-- 
cgit v1.2.3


From 67a94c23bb7338c321ae71aa33f8d398c94e1d0c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 11 Feb 2009 13:06:53 +0100
Subject: [ARM] 5381/1: unwind: Reorganise the traps.c code

This patch moves code around in the arch/arm/kernel/traps.c file for
easier integration of the stack unwinding support.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/traps.h |  1 +
 arch/arm/kernel/traps.c      | 34 +++++++++++++++++++---------------
 2 files changed, 20 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index aa399aec568..491960bf426 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -25,5 +25,6 @@ static inline int in_exception_text(unsigned long ptr)
 }
 
 extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
 
 #endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 79abc4ddc0c..f68ca0fb0ed 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -152,11 +152,25 @@ static void dump_instr(struct pt_regs *regs)
 
 static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 {
-	unsigned int fp;
+	unsigned int fp, mode;
 	int ok = 1;
 
 	printk("Backtrace: ");
-	fp = regs->ARM_fp;
+
+	if (!tsk)
+		tsk = current;
+
+	if (regs) {
+		fp = regs->ARM_fp;
+		mode = processor_mode(regs);
+	} else if (tsk != current) {
+		fp = thread_saved_fp(tsk);
+		mode = 0x10;
+	} else {
+		asm("mov %0, fp" : "=r" (fp) : : "cc");
+		mode = 0x10;
+	}
+
 	if (!fp) {
 		printk("no frame pointer");
 		ok = 0;
@@ -168,29 +182,19 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 	printk("\n");
 
 	if (ok)
-		c_backtrace(fp, processor_mode(regs));
+		c_backtrace(fp, mode);
 }
 
 void dump_stack(void)
 {
-	__backtrace();
+	dump_backtrace(NULL, NULL);
 }
 
 EXPORT_SYMBOL(dump_stack);
 
 void show_stack(struct task_struct *tsk, unsigned long *sp)
 {
-	unsigned long fp;
-
-	if (!tsk)
-		tsk = current;
-
-	if (tsk != current)
-		fp = thread_saved_fp(tsk);
-	else
-		asm("mov %0, fp" : "=r" (fp) : : "cc");
-
-	c_backtrace(fp, 0x10);
+	dump_backtrace(NULL, tsk);
 	barrier();
 }
 
-- 
cgit v1.2.3


From 2d7c11bfc91637e5f9bc5f8c9a82aaffcc0e97aa Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 11 Feb 2009 13:07:53 +0100
Subject: [ARM] 5382/1: unwind: Reorganise the stacktrace support

This patch changes the walk_stacktrace and its callers for easier
integration of stack unwinding. The arch/arm/kernel/stacktrace.h file is
also moved to arch/arm/include/asm/stacktrace.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/stacktrace.h  | 15 +++++++
 arch/arm/include/asm/thread_info.h |  2 +
 arch/arm/kernel/process.c          | 21 +++++----
 arch/arm/kernel/stacktrace.c       | 88 ++++++++++++++++++++++++++------------
 arch/arm/kernel/stacktrace.h       |  9 ----
 arch/arm/kernel/time.c             | 21 ++++++---
 arch/arm/oprofile/backtrace.c      | 14 +++---
 7 files changed, 110 insertions(+), 60 deletions(-)
 create mode 100644 arch/arm/include/asm/stacktrace.h
 delete mode 100644 arch/arm/kernel/stacktrace.h

(limited to 'arch')

diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
new file mode 100644
index 00000000000..4d0a16441b2
--- /dev/null
+++ b/arch/arm/include/asm/stacktrace.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long lr;
+	unsigned long pc;
+};
+
+extern int unwind_frame(struct stackframe *frame);
+extern void walk_stackframe(struct stackframe *frame,
+			    int (*fn)(struct stackframe *, void *), void *data);
+
+#endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index b9dc8a84257..4f8848260ee 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -99,6 +99,8 @@ static inline struct thread_info *current_thread_info(void)
 
 #define thread_saved_pc(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
 #define thread_saved_fp(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ea6fa8952..af377c73d90 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -34,6 +34,7 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/thread_notify.h>
+#include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
 static const char *processor_modes[] = {
@@ -372,23 +373,21 @@ EXPORT_SYMBOL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *p)
 {
-	unsigned long fp, lr;
-	unsigned long stack_start, stack_end;
+	struct stackframe frame;
 	int count = 0;
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
-	stack_start = (unsigned long)end_of_stack(p);
-	stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE;
-
-	fp = thread_saved_fp(p);
+	frame.fp = thread_saved_fp(p);
+	frame.sp = thread_saved_sp(p);
+	frame.lr = 0;			/* recovered from the stack */
+	frame.pc = thread_saved_pc(p);
 	do {
-		if (fp < stack_start || fp > stack_end)
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
 			return 0;
-		lr = ((unsigned long *)fp)[-1];
-		if (!in_sched_functions(lr))
-			return lr;
-		fp = *(unsigned long *) (fp - 12);
+		if (!in_sched_functions(frame.pc))
+			return frame.pc;
 	} while (count ++ < 16);
 	return 0;
 }
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index fc650f64df4..9f444e5cc16 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -2,35 +2,60 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 
-#include "stacktrace.h"
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
-		    int (*fn)(struct stackframe *, void *), void *data)
+#include <asm/stacktrace.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ *	mov	ip, sp
+ *	stmdb	sp!, {fp, ip, lr, pc}
+ *	sub	fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ *	ldm	sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int unwind_frame(struct stackframe *frame)
 {
-	struct stackframe *frame;
-
-	do {
-		/*
-		 * Check current frame pointer is within bounds
-		 */
-		if (fp < (low + 12) || fp + 4 >= high)
-			break;
+	unsigned long high, low;
+	unsigned long fp = frame->fp;
 
-		frame = (struct stackframe *)(fp - 12);
+	/* only go to a higher address on the stack */
+	low = frame->sp;
+	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
 
-		if (fn(frame, data))
-			break;
+	/* check current frame pointer is within bounds */
+	if (fp < (low + 12) || fp + 4 >= high)
+		return -EINVAL;
 
-		/*
-		 * Update the low bound - the next frame must always
-		 * be at a higher address than the current frame.
-		 */
-		low = fp + 4;
-		fp = frame->fp;
-	} while (fp);
+	/* restore the registers from the stack frame */
+	frame->fp = *(unsigned long *)(fp - 12);
+	frame->sp = *(unsigned long *)(fp - 8);
+	frame->pc = *(unsigned long *)(fp - 4);
 
 	return 0;
 }
+#endif
+
+void walk_stackframe(struct stackframe *frame,
+		     int (*fn)(struct stackframe *, void *), void *data)
+{
+	while (1) {
+		int ret;
+
+		if (fn(frame, data))
+			break;
+		ret = unwind_frame(frame);
+		if (ret < 0)
+			break;
+	}
+}
 EXPORT_SYMBOL(walk_stackframe);
 
 #ifdef CONFIG_STACKTRACE
@@ -44,7 +69,7 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
-	unsigned long addr = frame->lr;
+	unsigned long addr = frame->pc;
 
 	if (data->no_sched_functions && in_sched_functions(addr))
 		return 0;
@@ -61,11 +86,10 @@ static int save_trace(struct stackframe *frame, void *d)
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	struct stack_trace_data data;
-	unsigned long fp, base;
+	struct stackframe frame;
 
 	data.trace = trace;
 	data.skip = trace->skip;
-	base = (unsigned long)task_stack_page(tsk);
 
 	if (tsk != current) {
 #ifdef CONFIG_SMP
@@ -76,14 +100,22 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		BUG();
 #else
 		data.no_sched_functions = 1;
-		fp = thread_saved_fp(tsk);
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		frame.lr = 0;		/* recovered from the stack */
+		frame.pc = thread_saved_pc(tsk);
 #endif
 	} else {
+		register unsigned long current_sp asm ("sp");
+
 		data.no_sched_functions = 0;
-		asm("mov %0, fp" : "=r" (fp));
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.lr = (unsigned long)__builtin_return_address(0);
+		frame.pc = (unsigned long)save_stack_trace_tsk;
 	}
 
-	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+	walk_stackframe(&frame, save_trace, &data);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
diff --git a/arch/arm/kernel/stacktrace.h b/arch/arm/kernel/stacktrace.h
deleted file mode 100644
index e9fd20cb566..00000000000
--- a/arch/arm/kernel/stacktrace.h
+++ /dev/null
@@ -1,9 +0,0 @@
-struct stackframe {
-	unsigned long fp;
-	unsigned long sp;
-	unsigned long lr;
-	unsigned long pc;
-};
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
-		    int (*fn)(struct stackframe *, void *), void *data);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index c68b44aa88d..4cdc4a0bd02 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -33,6 +33,7 @@
 
 #include <asm/leds.h>
 #include <asm/thread_info.h>
+#include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
 /*
@@ -55,14 +56,22 @@ EXPORT_SYMBOL(rtc_lock);
 #ifdef CONFIG_SMP
 unsigned long profile_pc(struct pt_regs *regs)
 {
-	unsigned long fp, pc = instruction_pointer(regs);
+	struct stackframe frame;
 
-	if (in_lock_functions(pc)) {
-		fp = regs->ARM_fp;
-		pc = ((unsigned long *)fp)[-1];
-	}
+	if (!in_lock_functions(regs->ARM_pc))
+		return regs->ARM_pc;
+
+	frame.fp = regs->ARM_fp;
+	frame.sp = regs->ARM_sp;
+	frame.lr = regs->ARM_lr;
+	frame.pc = regs->ARM_pc;
+	do {
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
+			return 0;
+	} while (in_lock_functions(frame.pc));
 
-	return pc;
+	return frame.pc;
 }
 EXPORT_SYMBOL(profile_pc);
 #endif
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index cefc21c2eee..d805a52b503 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -18,15 +18,14 @@
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 #include <asm/ptrace.h>
-
-#include "../kernel/stacktrace.h"
+#include <asm/stacktrace.h>
 
 static int report_trace(struct stackframe *frame, void *d)
 {
 	unsigned int *depth = d;
 
 	if (*depth) {
-		oprofile_add_trace(frame->lr);
+		oprofile_add_trace(frame->pc);
 		(*depth)--;
 	}
 
@@ -70,9 +69,12 @@ void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
 
 	if (!user_mode(regs)) {
-		unsigned long base = ((unsigned long)regs) & ~(THREAD_SIZE - 1);
-		walk_stackframe(regs->ARM_fp, base, base + THREAD_SIZE,
-				report_trace, &depth);
+		struct stackframe frame;
+		frame.fp = regs->ARM_fp;
+		frame.sp = regs->ARM_sp;
+		frame.lr = regs->ARM_lr;
+		frame.pc = regs->ARM_pc;
+		walk_stackframe(&frame, report_trace, &depth);
 		return;
 	}
 
-- 
cgit v1.2.3


From 3023533de43c5c01c660e1b48d3700b028eb4615 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 13:28:43 +0100
Subject: x86: fix warning in find_low_pfn_range()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index d48f2560364..e77459dd38a 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -722,7 +722,7 @@ void __init find_low_pfn_range(void)
 			highmem_pages = 0;
 #ifdef CONFIG_HIGHMEM
 		if (highmem_pages >= max_pfn) {
-			printk(KERN_ERR "highmem size specified (%uMB) is "
+			printk(KERN_ERR "highmem size specified (%luMB) is "
 				"bigger than pages available (%luMB)!.\n",
 				pages_to_mb(highmem_pages),
 				pages_to_mb(max_pfn));
@@ -731,7 +731,7 @@ void __init find_low_pfn_range(void)
 		if (highmem_pages) {
 			if (max_low_pfn - highmem_pages <
 			    64*1024*1024/PAGE_SIZE){
-				printk(KERN_ERR "highmem size %uMB results in "
+				printk(KERN_ERR "highmem size %luMB results in "
 				"smaller than 64MB lowmem, ignoring it.\n"
 					, pages_to_mb(highmem_pages));
 				highmem_pages = 0;
-- 
cgit v1.2.3


From 4769843bc265a9c24584b98709cf39e1df5c1404 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 13:31:41 +0100
Subject: x86, 32-bit: clean up find_low_pfn_range()

Impact: cleanup

Split find_low_pfn_range() into two functions:

 - lowmem_pfn_init()
 - highmem_pfn_init()

The former gets called if all of RAM fits into lowmem,
otherwise we call highmem_pfn_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 137 +++++++++++++++++++++++++++++---------------------
 1 file changed, 79 insertions(+), 58 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index e77459dd38a..9d36eb9ebd5 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -675,75 +675,96 @@ static int __init parse_highmem(char *arg)
 }
 early_param("highmem", parse_highmem);
 
+#define MSG_HIGHMEM_TOO_BIG \
+	"highmem size (%luMB) is bigger than pages available (%luMB)!\n"
+
+#define MSG_LOWMEM_TOO_SMALL \
+	"highmem size (%luMB) results in <64MB lowmem, ignoring it!\n"
 /*
- * Determine low and high memory ranges:
+ * All of RAM fits into lowmem - but if user wants highmem
+ * artificially via the highmem=x boot parameter then create
+ * it:
  */
-void __init find_low_pfn_range(void)
+void __init lowmem_pfn_init(void)
 {
-	/* it could update max_pfn */
-
-	/* max_low_pfn is 0, we already have early_res support */
-
-	max_low_pfn = max_pfn;
-	if (max_low_pfn > MAXMEM_PFN) {
-		if (highmem_pages == -1)
-			highmem_pages = max_pfn - MAXMEM_PFN;
-		if (highmem_pages + MAXMEM_PFN < max_pfn)
-			max_pfn = MAXMEM_PFN + highmem_pages;
-		if (highmem_pages + MAXMEM_PFN > max_pfn) {
-			printk(KERN_WARNING "only %luMB highmem pages "
-				"available, ignoring highmem size of %luMB.\n",
-				pages_to_mb(max_pfn - MAXMEM_PFN),
+	if (highmem_pages == -1)
+		highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+	if (highmem_pages >= max_pfn) {
+		printk(KERN_ERR MSG_HIGHMEM_TOO_BIG,
+			pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+		highmem_pages = 0;
+	}
+	if (highmem_pages) {
+		if (max_low_pfn - highmem_pages < 64*1024*1024/PAGE_SIZE) {
+			printk(KERN_ERR MSG_LOWMEM_TOO_SMALL,
 				pages_to_mb(highmem_pages));
 			highmem_pages = 0;
 		}
-		max_low_pfn = MAXMEM_PFN;
+		max_low_pfn -= highmem_pages;
+	}
+#else
+	if (highmem_pages)
+		printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+}
+
+#define MSG_HIGHMEM_TOO_SMALL \
+	"only %luMB highmem pages available, ignoring highmem size of %luMB!\n"
+
+#define MSG_HIGHMEM_TRIMMED \
+	"Warning: only 4GB will be used. Use a HIGHMEM64G enabled kernel!\n"
+/*
+ * We have more RAM than fits into lowmem - we try to put it into
+ * highmem, also taking the highmem=x boot parameter into account:
+ */
+void __init highmem_pfn_init(void)
+{
+	if (highmem_pages == -1)
+		highmem_pages = max_pfn - MAXMEM_PFN;
+
+	if (highmem_pages + MAXMEM_PFN < max_pfn)
+		max_pfn = MAXMEM_PFN + highmem_pages;
+
+	if (highmem_pages + MAXMEM_PFN > max_pfn) {
+		printk(KERN_WARNING MSG_HIGHMEM_TOO_SMALL,
+			pages_to_mb(max_pfn - MAXMEM_PFN),
+			pages_to_mb(highmem_pages));
+		highmem_pages = 0;
+	}
+	max_low_pfn = MAXMEM_PFN;
 #ifndef CONFIG_HIGHMEM
-		/* Maximum memory usable is what is directly addressable */
-		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
-					MAXMEM>>20);
-		if (max_pfn > MAX_NONPAE_PFN)
-			printk(KERN_WARNING
-				 "Use a HIGHMEM64G enabled kernel.\n");
-		else
-			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-		max_pfn = MAXMEM_PFN;
+	/* Maximum memory usable is what is directly addressable */
+	printk(KERN_WARNING "Warning only %ldMB will be used.\n", MAXMEM>>20);
+	if (max_pfn > MAX_NONPAE_PFN)
+		printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
+	else
+		printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+	max_pfn = MAXMEM_PFN;
 #else /* !CONFIG_HIGHMEM */
 #ifndef CONFIG_HIGHMEM64G
-		if (max_pfn > MAX_NONPAE_PFN) {
-			max_pfn = MAX_NONPAE_PFN;
-			printk(KERN_WARNING "Warning only 4GB will be used."
-				"Use a HIGHMEM64G enabled kernel.\n");
-		}
+	if (max_pfn > MAX_NONPAE_PFN) {
+		max_pfn = MAX_NONPAE_PFN;
+		printk(KERN_WARNING MSG_HIGHMEM_TRIMMED);
+	}
 #endif /* !CONFIG_HIGHMEM64G */
 #endif /* !CONFIG_HIGHMEM */
-	} else {
-		if (highmem_pages == -1)
-			highmem_pages = 0;
-#ifdef CONFIG_HIGHMEM
-		if (highmem_pages >= max_pfn) {
-			printk(KERN_ERR "highmem size specified (%luMB) is "
-				"bigger than pages available (%luMB)!.\n",
-				pages_to_mb(highmem_pages),
-				pages_to_mb(max_pfn));
-			highmem_pages = 0;
-		}
-		if (highmem_pages) {
-			if (max_low_pfn - highmem_pages <
-			    64*1024*1024/PAGE_SIZE){
-				printk(KERN_ERR "highmem size %luMB results in "
-				"smaller than 64MB lowmem, ignoring it.\n"
-					, pages_to_mb(highmem_pages));
-				highmem_pages = 0;
-			}
-			max_low_pfn -= highmem_pages;
-		}
-#else
-		if (highmem_pages)
-			printk(KERN_ERR "ignoring highmem size on non-highmem"
-					" kernel!\n");
-#endif
-	}
+}
+
+/*
+ * Determine low and high memory ranges:
+ */
+void __init find_low_pfn_range(void)
+{
+	/* it could update max_pfn */
+
+	/* max_low_pfn is 0, we already have early_res support */
+	max_low_pfn = max_pfn;
+
+	if (max_low_pfn > MAXMEM_PFN)
+		highmem_pfn_init();
+	else
+		lowmem_pfn_init();
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-- 
cgit v1.2.3


From d88316c243e5458a1888edbe0353c4dec6e61c73 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 12 Feb 2009 15:16:03 +0100
Subject: x86, 32-bit: refactor find_low_pfn_range()

Impact: cleanup

Make the max_low_pfn logic a bit more standard between
lowmem_pfn_init() and highmem_pfn_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9d36eb9ebd5..1a9612499a3 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -687,6 +687,9 @@ early_param("highmem", parse_highmem);
  */
 void __init lowmem_pfn_init(void)
 {
+	/* max_low_pfn is 0, we already have early_res support */
+	max_low_pfn = max_pfn;
+
 	if (highmem_pages == -1)
 		highmem_pages = 0;
 #ifdef CONFIG_HIGHMEM
@@ -720,6 +723,8 @@ void __init lowmem_pfn_init(void)
  */
 void __init highmem_pfn_init(void)
 {
+	max_low_pfn = MAXMEM_PFN;
+
 	if (highmem_pages == -1)
 		highmem_pages = max_pfn - MAXMEM_PFN;
 
@@ -732,7 +737,6 @@ void __init highmem_pfn_init(void)
 			pages_to_mb(highmem_pages));
 		highmem_pages = 0;
 	}
-	max_low_pfn = MAXMEM_PFN;
 #ifndef CONFIG_HIGHMEM
 	/* Maximum memory usable is what is directly addressable */
 	printk(KERN_WARNING "Warning only %ldMB will be used.\n", MAXMEM>>20);
@@ -758,13 +762,10 @@ void __init find_low_pfn_range(void)
 {
 	/* it could update max_pfn */
 
-	/* max_low_pfn is 0, we already have early_res support */
-	max_low_pfn = max_pfn;
-
-	if (max_low_pfn > MAXMEM_PFN)
-		highmem_pfn_init();
-	else
+	if (max_pfn <= MAXMEM_PFN)
 		lowmem_pfn_init();
+	else
+		highmem_pfn_init();
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-- 
cgit v1.2.3


From 999c7880cc8eeb0cbe6610b8c6d0ab0ec51cd848 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 13 Feb 2009 13:15:55 +0100
Subject: x86 headers: remove duplicate pud_large() definition

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 62024ff897d..1c097a3a666 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -387,13 +387,6 @@ static inline unsigned long pages_to_mb(unsigned long npg)
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
 	remap_pfn_range(vma, vaddr, pfn, size, prot)
 
-#if PAGETABLE_LEVELS == 2
-static inline int pud_large(pud_t pud)
-{
-	return 0;
-}
-#endif
-
 #if PAGETABLE_LEVELS > 2
 static inline int pud_none(pud_t pud)
 {
-- 
cgit v1.2.3


From 56cefcea7c8769ffc04a5609e6ac849e36685468 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 13 Feb 2009 13:23:02 +0100
Subject: x86 headers: include linux/types.h

To properly pick up types relied on by prototypes like 'bool'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/page.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 467ce69306b..89ed9d70b0a 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_PAGE_H
 #define _ASM_X86_PAGE_H
 
+#include <linux/types.h>
+
 #ifdef __KERNEL__
 
 #include <asm/page_types.h>
-- 
cgit v1.2.3


From e43623b4ed1d0a1a86f0e05a2df8b9637b90ddd7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 13 Feb 2009 13:24:19 +0100
Subject: x86 headers: include page_types.h in pgtable_types.h

To properly pick up details like PTE_FLAGS_MASK.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable_types.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index a7452f10930..9dafe87be2d 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_PGTABLE_DEFS_H
 
 #include <linux/const.h>
+#include <asm/page_types.h>
 
 #define FIRST_USER_ADDRESS	0
 
-- 
cgit v1.2.3


From beb6943d8df7ce9278282101af4e0f6f7b648451 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 13 Feb 2009 13:36:47 +0100
Subject: x86 headers: protect page_32.h via __ASSEMBLY__

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/page_32.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page_32.h b/arch/x86/include/asm/page_32.h
index b3f0bf79e84..da4e762406f 100644
--- a/arch/x86/include/asm/page_32.h
+++ b/arch/x86/include/asm/page_32.h
@@ -3,6 +3,8 @@
 
 #include <asm/page_32_types.h>
 
+#ifndef __ASSEMBLY__
+
 #ifdef CONFIG_HUGETLB_PAGE
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
 #endif
@@ -19,8 +21,6 @@ extern unsigned long __phys_addr(unsigned long);
 #define pfn_valid(pfn)		((pfn) < max_mapnr)
 #endif /* CONFIG_FLATMEM */
 
-#ifndef __ASSEMBLY__
-
 #ifdef CONFIG_X86_USE_3DNOW
 #include <asm/mmx.h>
 
-- 
cgit v1.2.3


From 694aa960608d2976666d850bd4ef78053bbd0c84 Mon Sep 17 00:00:00 2001
From: Ian Campbell <Ian.Campbell@citrix.com>
Date: Thu, 12 Feb 2009 16:25:42 -0800
Subject: xen: fix xen_flush_tlb_others

The commit
    commit 4595f9620cda8a1e973588e743cf5f8436dd20c6
    Author: Rusty Russell <rusty@rustcorp.com.au>
    Date:   Sat Jan 10 21:58:09 2009 -0800

        x86: change flush_tlb_others to take a const struct cpumask

causes xen_flush_tlb_others to allocate a multicall and then issue it
without initializing it in the case where the cpumask is empty,
leading to:

        [    8.354898] 1 multicall(s) failed: cpu 1
        [    8.354921] Pid: 2213, comm: bootclean Not tainted 2.6.29-rc3-x86_32p-xenU-tip #135
        [    8.354937] Call Trace:
        [    8.354955]  [<c01036e3>] xen_mc_flush+0x133/0x1b0
        [    8.354971]  [<c0105d2a>] ? xen_force_evtchn_callback+0x1a/0x30
        [    8.354988]  [<c0105a60>] xen_flush_tlb_others+0xb0/0xd0
        [    8.355003]  [<c0126643>] flush_tlb_page+0x53/0xa0
        [    8.355018]  [<c0176a80>] do_wp_page+0x2a0/0x7c0
        [    8.355034]  [<c0238f0a>] ? notify_remote_via_irq+0x3a/0x70
        [    8.355049]  [<c0178950>] handle_mm_fault+0x7b0/0xa50
        [    8.355065]  [<c0131a3e>] ? wake_up_new_task+0x8e/0xb0
        [    8.355079]  [<c01337b5>] ? do_fork+0xe5/0x320
        [    8.355095]  [<c0121919>] do_page_fault+0xe9/0x240
        [    8.355109]  [<c0121830>] ? do_page_fault+0x0/0x240
        [    8.355125]  [<c032457a>] error_code+0x72/0x78
        [    8.355139]   call  1/1: op=2863311530 arg=[aaaaaaaa] result=-38     xen_flush_tlb_others+0x41/0xd0

Since empty cpumasks are rare and undoing an xen_mc_entry() is tricky
just issue such requests normally.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/mmu.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index d2e8ed1aff3..319bd40a57c 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1273,8 +1273,6 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 	/* Remove us, and any offline CPUS. */
 	cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
-	if (unlikely(cpumask_empty(to_cpumask(args->mask))))
-		goto issue;
 
 	if (va == TLB_FLUSH_ALL) {
 		args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
@@ -1285,7 +1283,6 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 
 	MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
 
-issue:
 	xen_mc_issue(PARAVIRT_LAZY_MMU);
 }
 
-- 
cgit v1.2.3


From c466ed2e4337c5eb03b283da507eb5328ab06c73 Mon Sep 17 00:00:00 2001
From: Dimitri Sivanich <sivanich@sgi.com>
Date: Fri, 13 Feb 2009 08:40:55 -0600
Subject: x86, UV: set full apicid in uv_hub_send_ipi

The uv_hub_send_ipi() function needs to set the full apicid in the
UVH_IPI_INT mmr.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genx2apic_uv_x.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 6adb5e6f4d9..89b84e004f0 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -114,16 +114,15 @@ int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
 
 static void uv_send_IPI_one(int cpu, int vector)
 {
-	unsigned long val, apicid, lapicid;
+	unsigned long val, apicid;
 	int pnode;
 
 	apicid = per_cpu(x86_cpu_to_apicid, cpu);
-	lapicid = apicid & 0x3f; /* ZZZ macro needed */
 	pnode = uv_apicid_to_pnode(apicid);
 
-	val = (     1UL << UVH_IPI_INT_SEND_SHFT    ) |
-	      ( lapicid << UVH_IPI_INT_APIC_ID_SHFT ) |
-	      (  vector << UVH_IPI_INT_VECTOR_SHFT  );
+	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+	      (vector << UVH_IPI_INT_VECTOR_SHFT);
 
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
-- 
cgit v1.2.3


From 0341c14da49e7b93d2998926f6ac89a3129e3fa1 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 13 Feb 2009 11:14:01 -0800
Subject: x86: use _types.h headers in asm where available

In general, the only definitions that assembly files can use
are in _types.S headers (where available), so convert them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/boot/compressed/head_32.S     | 2 +-
 arch/x86/boot/compressed/head_64.S     | 4 ++--
 arch/x86/boot/header.S                 | 2 +-
 arch/x86/kernel/acpi/realmode/wakeup.S | 4 ++--
 arch/x86/kernel/acpi/wakeup_32.S       | 2 +-
 arch/x86/kernel/acpi/wakeup_64.S       | 4 ++--
 arch/x86/kernel/efi_stub_32.S          | 2 +-
 arch/x86/kernel/entry_32.S             | 2 +-
 arch/x86/kernel/entry_64.S             | 2 +-
 arch/x86/kernel/head_32.S              | 4 ++--
 arch/x86/kernel/relocate_kernel_32.S   | 2 +-
 arch/x86/kernel/relocate_kernel_64.S   | 4 ++--
 arch/x86/kernel/trampoline_32.S        | 2 +-
 arch/x86/kernel/trampoline_64.S        | 4 ++--
 arch/x86/kernel/vmlinux_32.lds.S       | 2 +-
 arch/x86/kernel/vmlinux_64.lds.S       | 2 +-
 arch/x86/lib/getuser.S                 | 2 +-
 arch/x86/power/hibernate_asm_32.S      | 2 +-
 arch/x86/power/hibernate_asm_64.S      | 2 +-
 arch/x86/xen/xen-head.S                | 2 +-
 20 files changed, 26 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 29c5fbf0839..112f81abfa6 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -25,7 +25,7 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1d5dff4123e..36743525e37 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -26,8 +26,8 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
+#include <asm/pgtable_types.h>
+#include <asm/page_types.h>
 #include <asm/boot.h>
 #include <asm/msr.h>
 #include <asm/processor-flags.h>
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index b993062e9a5..7ccff4884a2 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -19,7 +19,7 @@
 #include <linux/utsrelease.h>
 #include <asm/boot.h>
 #include <asm/e820.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/setup.h>
 #include "boot.h"
 #include "offsets.h"
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
index 3355973b12a..580b4e29601 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -3,8 +3,8 @@
  */
 #include <asm/segment.h>
 #include <asm/msr-index.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
+#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 #include <asm/processor-flags.h>
 
 	.code16
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index a12e6a9fb65..8ded418b059 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -1,7 +1,7 @@
 	.section .text.page_aligned
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 
 # Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
 
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index bcc293423a7..82add8b804b 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -1,8 +1,8 @@
 .text
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
+#include <asm/pgtable_types.h>
+#include <asm/page_types.h>
 #include <asm/msr.h>
 #include <asm/asm-offsets.h>
 
diff --git a/arch/x86/kernel/efi_stub_32.S b/arch/x86/kernel/efi_stub_32.S
index ef00bb77d7e..8b9171b9cbd 100644
--- a/arch/x86/kernel/efi_stub_32.S
+++ b/arch/x86/kernel/efi_stub_32.S
@@ -6,7 +6,7 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 
 /*
  * efi_call_phys(void *, ...) is a function with variable parameters.
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index e9920683145..999e827ef9c 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -47,7 +47,7 @@
 #include <asm/errno.h>
 #include <asm/segment.h>
 #include <asm/smp.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/desc.h>
 #include <asm/percpu.h>
 #include <asm/dwarf2.h>
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index fbcf96b295f..dcf31283f94 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -48,7 +48,7 @@
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 #include <asm/hw_irq.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/irqflags.h>
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 2a0aad7718d..c32ca19d591 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -11,8 +11,8 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
+#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 #include <asm/desc.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index a160f311972..2064d0aa8d2 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -7,7 +7,7 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/kexec.h>
 #include <asm/processor-flags.h>
 
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index b0bbdd4829c..d32cfb27a47 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -7,10 +7,10 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/kexec.h>
 #include <asm/processor-flags.h>
-#include <asm/pgtable.h>
+#include <asm/pgtable_types.h>
 
 /*
  * Must be relocatable PIC code callable as a C function
diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S
index d8ccc3c6552..66d874e5404 100644
--- a/arch/x86/kernel/trampoline_32.S
+++ b/arch/x86/kernel/trampoline_32.S
@@ -29,7 +29,7 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 
 /* We can free up trampoline after bootup if cpu hotplug is not supported. */
 #ifndef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 95a012a4664..cddfb8d386b 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -25,8 +25,8 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
+#include <asm/pgtable_types.h>
+#include <asm/page_types.h>
 #include <asm/msr.h>
 #include <asm/segment.h>
 #include <asm/processor-flags.h>
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index 3eba7f7bac0..0d860963f26 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -12,7 +12,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/cache.h>
 #include <asm/boot.h>
 
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 087a7f2c639..fbfced6f680 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -6,7 +6,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/asm-offsets.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 
 #undef i386	/* in case the preprocessor is a 32bit one */
 
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index ad374003742..51f1504cddd 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -28,7 +28,7 @@
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index d1e9b53f9d3..b641388d828 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -8,7 +8,7 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
 
diff --git a/arch/x86/power/hibernate_asm_64.S b/arch/x86/power/hibernate_asm_64.S
index 000415947d9..9356547d8c0 100644
--- a/arch/x86/power/hibernate_asm_64.S
+++ b/arch/x86/power/hibernate_asm_64.S
@@ -18,7 +18,7 @@
 	.text
 #include <linux/linkage.h>
 #include <asm/segment.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
 
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 63d49a523ed..1a5ff24e29c 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -8,7 +8,7 @@
 
 #include <asm/boot.h>
 #include <asm/asm.h>
-#include <asm/page.h>
+#include <asm/page_types.h>
 
 #include <xen/interface/elfnote.h>
 #include <asm/xen/interface.h>
-- 
cgit v1.2.3


From 9b3651cbc26cfcea8276ecaff66718ea087f2e91 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 13 Feb 2009 11:01:54 -0800
Subject: x86: move more pagetable-related definitions into pgtable*.h

PAGETABLE_LEVELS and the PTE masks should be in pgtable*.h

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/page_32_types.h        | 2 --
 arch/x86/include/asm/page_64_types.h        | 2 --
 arch/x86/include/asm/page_types.h           | 6 ------
 arch/x86/include/asm/pgtable-2level_types.h | 2 ++
 arch/x86/include/asm/pgtable-3level_types.h | 2 ++
 arch/x86/include/asm/pgtable_64_types.h     | 1 +
 arch/x86/include/asm/pgtable_types.h        | 6 ++++++
 7 files changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
index b5486aaf36e..f1e4a79a6e4 100644
--- a/arch/x86/include/asm/page_32_types.h
+++ b/arch/x86/include/asm/page_32_types.h
@@ -33,12 +33,10 @@
 /* 44=32+12, the limit we can fit into an unsigned long pfn */
 #define __PHYSICAL_MASK_SHIFT	44
 #define __VIRTUAL_MASK_SHIFT	32
-#define PAGETABLE_LEVELS	3
 
 #else  /* !CONFIG_X86_PAE */
 #define __PHYSICAL_MASK_SHIFT	32
 #define __VIRTUAL_MASK_SHIFT	32
-#define PAGETABLE_LEVELS	2
 #endif	/* CONFIG_X86_PAE */
 
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index bc73af3eda9..d38c91b7024 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_PAGE_64_DEFS_H
 #define _ASM_X86_PAGE_64_DEFS_H
 
-#define PAGETABLE_LEVELS	4
-
 #define THREAD_ORDER	1
 #define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
 #define CURRENT_MASK (~(THREAD_SIZE - 1))
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 2c52ff76758..2d625da6603 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -16,12 +16,6 @@
    (ie, 32-bit PAE). */
 #define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
 
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
-#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
-
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
-#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
-
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
 
diff --git a/arch/x86/include/asm/pgtable-2level_types.h b/arch/x86/include/asm/pgtable-2level_types.h
index 09ae67efceb..daacc23e3fb 100644
--- a/arch/x86/include/asm/pgtable-2level_types.h
+++ b/arch/x86/include/asm/pgtable-2level_types.h
@@ -17,6 +17,7 @@ typedef union {
 #endif	/* !__ASSEMBLY__ */
 
 #define SHARED_KERNEL_PMD	0
+#define PAGETABLE_LEVELS	2
 
 /*
  * traditional i386 two-level paging structure:
@@ -25,6 +26,7 @@ typedef union {
 #define PGDIR_SHIFT	22
 #define PTRS_PER_PGD	1024
 
+
 /*
  * the i386 is two-level, so we don't really have any
  * PMD directory physically.
diff --git a/arch/x86/include/asm/pgtable-3level_types.h b/arch/x86/include/asm/pgtable-3level_types.h
index bcc89625ebe..1bd5876c864 100644
--- a/arch/x86/include/asm/pgtable-3level_types.h
+++ b/arch/x86/include/asm/pgtable-3level_types.h
@@ -24,6 +24,8 @@ typedef union {
 #define SHARED_KERNEL_PMD	1
 #endif
 
+#define PAGETABLE_LEVELS	3
+
 /*
  * PGDIR_SHIFT determines what a top-level page table entry can map
  */
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 2f59135c6f2..fbf42b8e038 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -18,6 +18,7 @@ typedef struct { pteval_t pte; } pte_t;
 #endif	/* !__ASSEMBLY__ */
 
 #define SHARED_KERNEL_PMD	0
+#define PAGETABLE_LEVELS	4
 
 /*
  * PGDIR_SHIFT determines what a top-level page table entry can map
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 9dafe87be2d..4d258ad76a0 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -173,6 +173,12 @@
 
 #include <linux/types.h>
 
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
+
 typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
 
 typedef struct { pgdval_t pgd; } pgd_t;
-- 
cgit v1.2.3


From bf33a70a73876b163d62612e9567cbac6604ba7e Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Fri, 13 Feb 2009 12:52:44 -0600
Subject: x86: fix "__udivdi3" [drivers/scsi/aha1542.ko] undefined

Commit 976e8f677e42757e5586ea04a9ac8bb8ddaa037e ("x86: asm/io.h: unify
virt_to_phys/phys_to_virt") changed the return of virt_to_phys from long
to phys_addr_t which is unsigned long long on a PAE platform.

So, I could suggest a fix below since isa addresses may never be above
32 bits.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/io.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index e5a2ab44cd5..4f8e820cf38 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -125,7 +125,7 @@ static inline void *phys_to_virt(phys_addr_t address)
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */
-#define isa_virt_to_bus virt_to_phys
+#define isa_virt_to_bus (unsigned long)virt_to_phys
 #define isa_page_to_bus page_to_phys
 #define isa_bus_to_virt phys_to_virt
 
-- 
cgit v1.2.3


From 8b9dbc16d4f5786c6c930ab028722e3ed7e4285b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 12 Feb 2009 10:12:59 +0000
Subject: [ARM] omap: arrange for clock recalc methods to return the rate

linux-omap source commit 33d000c99ee393fe2042f93e8422f94976d276ce
introduces a way to "dry run" clock changes before they're committed.
However, this involves putting logic to handle this into each and
every recalc function, and unfortunately due to the caching, led to
some bugs.

Solve both of issues by making the recalc methods always return the
clock rate for the clock, which the caller decides what to do with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/clock.c             | 32 ++++++++++++--------------------
 arch/arm/mach-omap1/clock.h             | 10 +++++-----
 arch/arm/mach-omap2/clock.c             | 17 +++++++++--------
 arch/arm/mach-omap2/clock.h             |  4 ++--
 arch/arm/mach-omap2/clock24xx.c         | 20 ++++++++++----------
 arch/arm/mach-omap2/clock24xx.h         | 10 +++++-----
 arch/arm/mach-omap2/clock34xx.c         | 12 +++++++-----
 arch/arm/mach-omap2/clock34xx.h         |  4 ++--
 arch/arm/plat-omap/clock.c              | 15 ++++++---------
 arch/arm/plat-omap/include/mach/clock.h |  4 ++--
 10 files changed, 60 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index ccf989f4aa7..dafe4f71d15 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -156,27 +156,25 @@ __u32 arm_idlect1_mask;
  * Omap1 specific clock functions
  *-------------------------------------------------------------------------*/
 
-static void omap1_watchdog_recalc(struct clk * clk)
+static unsigned long omap1_watchdog_recalc(struct clk *clk)
 {
-	clk->rate = clk->parent->rate / 14;
+	return clk->parent->rate / 14;
 }
 
-static void omap1_uart_recalc(struct clk * clk)
+static unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
-	if (val & clk->enable_bit)
-		clk->rate = 48000000;
-	else
-		clk->rate = 12000000;
+	return val & clk->enable_bit ? 48000000 : 12000000;
 }
 
-static void omap1_sossi_recalc(struct clk *clk)
+static unsigned long omap1_sossi_recalc(struct clk *clk)
 {
 	u32 div = omap_readl(MOD_CONF_CTRL_1);
 
 	div = (div >> 17) & 0x7;
 	div++;
-	clk->rate = clk->parent->rate / div;
+
+	return clk->parent->rate / div;
 }
 
 static int omap1_clk_enable_dsp_domain(struct clk *clk)
@@ -344,19 +342,15 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
-static void omap1_ckctl_recalc(struct clk * clk)
+static unsigned long omap1_ckctl_recalc(struct clk *clk)
 {
-	int dsor;
-
 	/* Calculate divisor encoded as 2-bit exponent */
-	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
 
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
+	return clk->parent->rate / dsor;
 }
 
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 {
 	int dsor;
 
@@ -371,9 +365,7 @@ static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
 	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
 	omap1_clk_disable(&api_ck.clk);
 
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
+	return clk->parent->rate / dsor;
 }
 
 /* MPU virtual clock functions */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 28bc74e93e8..17f87427125 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -13,14 +13,14 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
-static void omap1_ckctl_recalc(struct clk * clk);
-static void omap1_watchdog_recalc(struct clk * clk);
+static unsigned long omap1_ckctl_recalc(struct clk *clk);
+static unsigned long omap1_watchdog_recalc(struct clk *clk);
 static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static void omap1_sossi_recalc(struct clk *clk);
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
+static unsigned long omap1_sossi_recalc(struct clk *clk);
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
 static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
 static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static void omap1_uart_recalc(struct clk * clk);
+static unsigned long omap1_uart_recalc(struct clk *clk);
 static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
 static void omap1_init_ext_clk(struct clk * clk);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 1b40d757500..5020cb1f2e7 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -239,11 +239,11 @@ u32 omap2_get_dpll_rate(struct clk *clk)
  * Used for clocks that have the same value as the parent clock,
  * divided by some factor
  */
-void omap2_fixed_divisor_recalc(struct clk *clk)
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
 {
 	WARN_ON(!clk->fixed_div);
 
-	clk->rate = clk->parent->rate / clk->fixed_div;
+	return clk->parent->rate / clk->fixed_div;
 }
 
 /**
@@ -449,21 +449,22 @@ err:
  * Used for clocks that are part of CLKSEL_xyz governed clocks.
  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
  */
-void omap2_clksel_recalc(struct clk *clk)
+unsigned long omap2_clksel_recalc(struct clk *clk)
 {
+	unsigned long rate;
 	u32 div = 0;
 
 	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
 
 	div = omap2_clksel_get_divisor(clk);
 	if (div == 0)
-		return;
+		return clk->rate;
 
-	if (clk->rate == (clk->parent->rate / div))
-		return;
-	clk->rate = clk->parent->rate / div;
+	rate = clk->parent->rate / div;
+
+	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
 
-	pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
+	return rate;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 90077f0df78..ca6bf226859 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -36,7 +36,7 @@ void omap2_clk_disable_unused(struct clk *clk);
 #define omap2_clk_disable_unused	NULL
 #endif
 
-void omap2_clksel_recalc(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
 void omap2_init_clk_clkdm(struct clk *clk);
 void omap2_init_clksel_parent(struct clk *clk);
 u32 omap2_clksel_get_divisor(struct clk *clk);
@@ -44,7 +44,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 				u32 *new_div);
 u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
 u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-void omap2_fixed_divisor_recalc(struct clk *clk);
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 069f3e1827a..f2b74e9b7d8 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -369,9 +369,9 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 
 }
 
-static void omap2_dpllcore_recalc(struct clk *clk)
+static unsigned long omap2_dpllcore_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_dpll_rate_24xx(clk);
+	return omap2_get_dpll_rate_24xx(clk);
 }
 
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -448,9 +448,9 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
  *
  * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
  */
-static void omap2_table_mpu_recalc(struct clk *clk)
+static unsigned long omap2_table_mpu_recalc(struct clk *clk)
 {
-	clk->rate = curr_prcm_set->mpu_speed;
+	return curr_prcm_set->mpu_speed;
 }
 
 /*
@@ -647,14 +647,14 @@ static u32 omap2_get_sysclkdiv(void)
 	return div;
 }
 
-static void omap2_osc_clk_recalc(struct clk *clk)
+static unsigned long omap2_osc_clk_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
 }
 
-static void omap2_sys_clk_recalc(struct clk *clk)
+static unsigned long omap2_sys_clk_recalc(struct clk *clk)
 {
-	clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
+	return clk->parent->rate / omap2_get_sysclkdiv();
 }
 
 /*
@@ -707,9 +707,9 @@ int __init omap2_clk_init(void)
 
 	clk_init(&omap2_clk_functions);
 
-	omap2_osc_clk_recalc(&osc_ck);
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
 	propagate_rate(&osc_ck);
-	omap2_sys_clk_recalc(&sys_ck);
+	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
 	propagate_rate(&sys_ck);
 
 	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 759489822ee..11da6215392 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,13 +24,13 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
-static void omap2_table_mpu_recalc(struct clk *clk);
+static unsigned long omap2_table_mpu_recalc(struct clk *clk);
 static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_osc_clk_recalc(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpllcore_recalc(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_osc_clk_recalc(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_dpllcore_recalc(struct clk *clk);
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 
 /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 3b6e27bc9fe..fb0f53b9681 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -289,9 +289,9 @@ static struct omap_clk omap34xx_clks[] = {
  *
  * Recalculate and propagate the DPLL rate.
  */
-static void omap3_dpll_recalc(struct clk *clk)
+static unsigned long omap3_dpll_recalc(struct clk *clk)
 {
-	clk->rate = omap2_get_dpll_rate(clk);
+	return omap2_get_dpll_rate(clk);
 }
 
 /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
@@ -787,9 +787,10 @@ static void omap3_dpll_deny_idle(struct clk *clk)
  * Using parent clock DPLL data, look up DPLL state.  If locked, set our
  * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
  */
-static void omap3_clkoutx2_recalc(struct clk *clk)
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	unsigned long rate;
 	u32 v;
 	struct clk *pclk;
 
@@ -808,9 +809,10 @@ static void omap3_clkoutx2_recalc(struct clk *clk)
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if (v != DPLL_LOCKED)
-		clk->rate = clk->parent->rate;
+		rate = clk->parent->rate;
 	else
-		clk->rate = clk->parent->rate * 2;
+		rate = clk->parent->rate * 2;
+	return rate;
 }
 
 /* Common clock code */
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 2138a58f634..764c7cd9fd8 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,8 +27,8 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
-static void omap3_dpll_recalc(struct clk *clk);
-static void omap3_clkoutx2_recalc(struct clk *clk);
+static unsigned long omap3_dpll_recalc(struct clk *clk);
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
 static void omap3_dpll_allow_idle(struct clk *clk);
 static void omap3_dpll_deny_idle(struct clk *clk);
 static u32 omap3_dpll_autoidle_read(struct clk *clk);
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 9833d73511a..08baa18497b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -126,7 +126,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 		ret = arch_clock->clk_set_rate(clk, rate);
 	if (ret == 0) {
 		if (clk->recalc)
-			clk->recalc(clk);
+			clk->rate = clk->recalc(clk);
 		propagate_rate(clk);
 	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -148,7 +148,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		ret = arch_clock->clk_set_parent(clk, parent);
 	if (ret == 0) {
 		if (clk->recalc)
-			clk->recalc(clk);
+			clk->rate = clk->recalc(clk);
 		propagate_rate(clk);
 	}
 	spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -188,12 +188,9 @@ static int __init omap_clk_setup(char *str)
 __setup("mpurate=", omap_clk_setup);
 
 /* Used for clocks that always have same value as the parent clock */
-void followparent_recalc(struct clk *clk)
+unsigned long followparent_recalc(struct clk *clk)
 {
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	clk->rate = clk->parent->rate;
+	return clk->parent->rate;
 }
 
 void clk_reparent(struct clk *child, struct clk *parent)
@@ -214,7 +211,7 @@ void propagate_rate(struct clk * tclk)
 
 	list_for_each_entry(clkp, &tclk->children, sibling) {
 		if (clkp->recalc)
-			clkp->recalc(clkp);
+			clkp->rate = clkp->recalc(clkp);
 		propagate_rate(clkp);
 	}
 }
@@ -234,7 +231,7 @@ void recalculate_root_clocks(void)
 
 	list_for_each_entry(clkp, &root_clks, sibling) {
 		if (clkp->recalc)
-			clkp->recalc(clkp);
+			clkp->rate = clkp->recalc(clkp);
 		propagate_rate(clkp);
 	}
 }
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 0ba28462a49..7b6f6bcbff9 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -75,7 +75,7 @@ struct clk {
 	unsigned long		rate;
 	__u32			flags;
 	void __iomem		*enable_reg;
-	void			(*recalc)(struct clk *);
+	unsigned long		(*recalc)(struct clk *);
 	int			(*set_rate)(struct clk *, unsigned long);
 	long			(*round_rate)(struct clk *, unsigned long);
 	void			(*init)(struct clk *);
@@ -123,7 +123,7 @@ extern void clk_reparent(struct clk *child, struct clk *parent);
 extern void clk_unregister(struct clk *clk);
 extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk *clk);
+extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 #ifdef CONFIG_CPU_FREQ
 extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-- 
cgit v1.2.3


From f6db44df5bd39ed33883786d35342759af796e4a Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 14 Feb 2009 23:59:18 -0800
Subject: x86: fix typo in filter_cpuid_features()

Impact: fix wrong disabling of cpu features

an amd system got this strange output:

 CPU: CPU feature monitor disabled due to lack of CPUID level 0x5

but in /proc/cpuinfo I have:

 cpuid level	: 5

on intel system:

 CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
 CPU: CPU feature dca disabled due to lack of CPUID level 0x9

but in /proc/cpuinfo i have:

 cpuid level     : 11

Tt turns out there is a typo, and we should use level member in df.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 21f086b4c1a..32093d08d87 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -241,9 +241,9 @@ static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
 		 * signs here...
 		 */
 		if (cpu_has(c, df->feature) &&
-		    ((s32)df->feature < 0 ?
-		     (u32)df->feature > (u32)c->extended_cpuid_level :
-		     (s32)df->feature > (s32)c->cpuid_level)) {
+		    ((s32)df->level < 0 ?
+		     (u32)df->level > (u32)c->extended_cpuid_level :
+		     (s32)df->level > (s32)c->cpuid_level)) {
 			clear_cpu_cap(c, df->feature);
 			if (warn)
 				printk(KERN_WARNING
@@ -253,7 +253,7 @@ static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
 				       df->level);
 		}
 	}
-}	
+}
 
 /*
  * Naming convention should be: <Name> [(<Codename>)]
-- 
cgit v1.2.3


From 88d0f550d71493cd975a11a03c166211b2f3bd32 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 14 Feb 2009 23:57:28 -0800
Subject: x86: make 32bit to call enable_IO_APIC early like 64bit

Impact: cleanup

So we remove some #ifdefs.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c    | 8 ++++----
 arch/x86/kernel/io_apic.c | 4 ----
 arch/x86/kernel/smpboot.c | 3 +--
 3 files changed, 5 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 8bd801db24d..b8616aaa168 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1646,19 +1646,19 @@ int __init APIC_init_uniprocessor(void)
 	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
 	setup_local_APIC();
 
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_IO_APIC
 	/*
 	 * Now enable IO-APICs, actually call clear_IO_APIC
 	 * We need clear_IO_APIC before enabling vector on BP
 	 */
 	if (!skip_ioapic_setup && nr_ioapics)
 		enable_IO_APIC();
-#endif
 
-#ifdef CONFIG_X86_IO_APIC
 	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
-#endif
 		localise_nmi_watchdog();
+#else
+	localise_nmi_watchdog();
+#endif
 	end_local_APIC_setup();
 
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 7248ca11bdc..0b7cde3da48 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3057,13 +3057,9 @@ out:
 void __init setup_IO_APIC(void)
 {
 
-#ifdef CONFIG_X86_32
-	enable_IO_APIC();
-#else
 	/*
 	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
 	 */
-#endif
 
 	io_apic_irqs = ~PIC_IRQS;
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index af57f88186e..10834954e30 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1154,13 +1154,12 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	 */
 	setup_local_APIC();
 
-#ifdef CONFIG_X86_64
 	/*
 	 * Enable IO APIC before setting up error vector
 	 */
 	if (!skip_ioapic_setup && nr_ioapics)
 		enable_IO_APIC();
-#endif
+
 	end_local_APIC_setup();
 
 	map_cpu_to_logical_apicid();
-- 
cgit v1.2.3


From 970ec1a8213cd1a1ea29972ebbe4575a8b30bca1 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 15 Feb 2009 14:06:13 -0800
Subject: [IA64] fix __apci_unmap_table

Impact: fix build error

to fix:

  tip/arch/ia64/kernel/acpi.c:203: error: conflicting types for '__acpi_unmap_table'
  tip/include/linux/acpi.h:82: error: previous declaration of '__acpi_unmap_table' was here
  tip/arch/ia64/kernel/acpi.c:203: error: conflicting types for '__acpi_unmap_table'
  tip/include/linux/acpi.h:82: error: previous declaration of '__acpi_unmap_table' was here

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/kernel/acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 2363ed17319..bdef2ce38c8 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -199,7 +199,7 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 	return __va(phys_addr);
 }
 
-char *__init __acpi_unmap_table(unsigned long virt_addr, unsigned long size)
+void __init __acpi_unmap_table(char *map, unsigned long size)
 {
 }
 
-- 
cgit v1.2.3


From cb9eff097831007afb30d64373f29d99825d0068 Mon Sep 17 00:00:00 2001
From: Patrick Ohly <patrick.ohly@intel.com>
Date: Thu, 12 Feb 2009 05:03:36 +0000
Subject: net: new user space API for time stamping of incoming and outgoing
 packets

User space can request hardware and/or software time stamping.
Reporting of the result(s) via a new control message is enabled
separately for each field in the message because some of the
fields may require additional computation and thus cause overhead.
User space can tell the different kinds of time stamps apart
and choose what suits its needs.

When a TX timestamp operation is requested, the TX skb will be cloned
and the clone will be time stamped (in hardware or software) and added
to the socket error queue of the skb, if the skb has a socket
associated with it.

The actual TX timestamp will reach userspace as a RX timestamp on the
cloned packet. If timestamping is requested and no timestamping is
done in the device driver (potentially this may use hardware
timestamping), it will be done in software after the device's
start_hard_xmit routine.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/alpha/include/asm/socket.h    | 3 +++
 arch/arm/include/asm/socket.h      | 3 +++
 arch/avr32/include/asm/socket.h    | 3 +++
 arch/blackfin/include/asm/socket.h | 3 +++
 arch/cris/include/asm/socket.h     | 3 +++
 arch/h8300/include/asm/socket.h    | 3 +++
 arch/ia64/include/asm/socket.h     | 3 +++
 arch/m68k/include/asm/socket.h     | 3 +++
 arch/mips/include/asm/socket.h     | 3 +++
 arch/parisc/include/asm/socket.h   | 3 +++
 arch/powerpc/include/asm/socket.h  | 3 +++
 arch/s390/include/asm/socket.h     | 3 +++
 arch/sh/include/asm/socket.h       | 3 +++
 arch/sparc/include/asm/socket.h    | 3 +++
 arch/x86/include/asm/socket.h      | 3 +++
 arch/xtensa/include/asm/socket.h   | 3 +++
 16 files changed, 48 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index a1057c2d95e..3641ec1452f 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -62,6 +62,9 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 6817be9573a..537de4e0ef5 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index 35863f26092..04c86061970 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h
index 2ca702e44d4..fac7fe9e1f8 100644
--- a/arch/blackfin/include/asm/socket.h
+++ b/arch/blackfin/include/asm/socket.h
@@ -53,4 +53,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif				/* _ASM_SOCKET_H */
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index 9df0ca82f5d..d5cf7400540 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -56,6 +56,9 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index da2520dbf25..602518a70a1 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index d5ef0aa3e31..745421225ec 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -63,4 +63,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index dbc64e92c41..ca87f938b03 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index facc2d7a87c..2abca178016 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -75,6 +75,9 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index fba402c95ac..885472bf7b7 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -54,6 +54,9 @@
 
 #define SO_MARK			0x401f
 
+#define SO_TIMESTAMPING		0x4020
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index f5a4e168e49..1e5cfad0e3f 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -61,4 +61,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index c786ab623b2..02330c50241 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -62,4 +62,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
index 6d4bf651295..345653b9682 100644
--- a/arch/sh/include/asm/socket.h
+++ b/arch/sh/include/asm/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* __ASM_SH_SOCKET_H */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index bf50d0c2d58..982a12f959f 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -50,6 +50,9 @@
 
 #define SO_MARK			0x0022
 
+#define SO_TIMESTAMPING		0x0023
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index 8ab9cc8b2ec..ca8bf2cd0ba 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index 6100682b1da..dd1a7a4a1ce 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -65,4 +65,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif	/* _XTENSA_SOCKET_H */
-- 
cgit v1.2.3


From 9033304a1520df346862c95743a6c2023f21f057 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 13:35:44 -0800
Subject: x86, xen: short-circuit tests for dom0

When testing for a dom0/initial/privileged domain, make sure the
predicate evaluates to a compile-time 0 if CONFIG_XEN_DOM0 isn't
enabled.  This will make most of the dom0 code evaporate without
much more effort.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/xen/hypervisor.h | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index 81fbd735aec..d5b7e90c0ed 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -38,22 +38,30 @@ extern struct shared_info *HYPERVISOR_shared_info;
 extern struct start_info *xen_start_info;
 
 enum xen_domain_type {
-	XEN_NATIVE,
-	XEN_PV_DOMAIN,
-	XEN_HVM_DOMAIN,
+	XEN_NATIVE,		/* running on bare hardware    */
+	XEN_PV_DOMAIN,		/* running in a PV domain      */
+	XEN_HVM_DOMAIN,		/* running in a Xen hvm domain */
 };
 
-extern enum xen_domain_type xen_domain_type;
-
 #ifdef CONFIG_XEN
-#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+extern enum xen_domain_type xen_domain_type;
 #else
-#define xen_domain()		(0)
+#define xen_domain_type		XEN_NATIVE
 #endif
 
-#define xen_pv_domain()		(xen_domain() && xen_domain_type == XEN_PV_DOMAIN)
-#define xen_hvm_domain()	(xen_domain() && xen_domain_type == XEN_HVM_DOMAIN)
+#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain()		(xen_domain() &&			\
+				 xen_domain_type == XEN_PV_DOMAIN)
+#define xen_hvm_domain()	(xen_domain() &&			\
+				 xen_domain_type == XEN_HVM_DOMAIN)
+
+#ifdef CONFIG_XEN_DOM0
+#include <xen/interface/xen.h>
 
-#define xen_initial_domain()	(xen_pv_domain() && xen_start_info->flags & SIF_INITDOMAIN)
+#define xen_initial_domain()	(xen_pv_domain() && \
+				 xen_start_info->flags & SIF_INITDOMAIN)
+#else  /* !CONFIG_XEN_DOM0 */
+#define xen_initial_domain()	(0)
+#endif	/* CONFIG_XEN_DOM0 */
 
 #endif /* _ASM_X86_XEN_HYPERVISOR_H */
-- 
cgit v1.2.3


From b93d51dc62a41b5c2d6f32a0870709dc0cc55545 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Fri, 6 Feb 2009 13:35:57 -0800
Subject: x86, xen: record and display initiator of each multicall when
 debugging

Store the caller for each multicall so we can report it on failure.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/multicalls.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index c738644b543..82f2513e975 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -39,6 +39,7 @@ struct mc_buffer {
 	struct multicall_entry entries[MC_BATCH];
 #if MC_DEBUG
 	struct multicall_entry debug[MC_BATCH];
+	void *caller[MC_BATCH];
 #endif
 	unsigned char args[MC_ARGS];
 	struct callback {
@@ -154,11 +155,12 @@ void xen_mc_flush(void)
 			       ret, smp_processor_id());
 			dump_stack();
 			for (i = 0; i < b->mcidx; i++) {
-				printk(KERN_DEBUG "  call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
+				printk(KERN_DEBUG "  call %2d/%d: op=%lu arg=[%lx] result=%ld\t%pF\n",
 				       i+1, b->mcidx,
 				       b->debug[i].op,
 				       b->debug[i].args[0],
-				       b->entries[i].result);
+				       b->entries[i].result,
+				       b->caller[i]);
 			}
 		}
 #endif
@@ -197,6 +199,9 @@ struct multicall_space __xen_mc_entry(size_t args)
 	}
 
 	ret.mc = &b->entries[b->mcidx];
+#ifdef MC_DEBUG
+	b->caller[b->mcidx] = __builtin_return_address(0);
+#endif
 	b->mcidx++;
 	ret.args = &b->args[argidx];
 	b->argidx = argidx + args;
-- 
cgit v1.2.3


From 3d39e9d07b576ee72f2c94cfad9e618fe21763b2 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 13:38:51 -0800
Subject: x86, xen: degrade BUG to WARN when multicall fails

If one of the components of a multicall fails, WARN rather than BUG,
to help with debugging.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/multicalls.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 82f2513e975..6cffd5532b9 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -179,7 +179,7 @@ void xen_mc_flush(void)
 	}
 	b->cbidx = 0;
 
-	BUG_ON(ret);
+	WARN_ON(ret);
 }
 
 struct multicall_space __xen_mc_entry(size_t args)
-- 
cgit v1.2.3


From c99608637eac8834d830496c462c054137772122 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 6 Feb 2009 13:38:56 -0800
Subject: x86, xen: do multicall callbacks with interrupts disabled

We can't call the callbacks after enabling interrupts, as we may get a
nested multicall call, which would cause a great deal of havok.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/multicalls.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 6cffd5532b9..8bff7e7c290 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -170,8 +170,6 @@ void xen_mc_flush(void)
 	} else
 		BUG_ON(b->argidx != 0);
 
-	local_irq_restore(flags);
-
 	for (i = 0; i < b->cbidx; i++) {
 		struct callback *cb = &b->callbacks[i];
 
@@ -179,6 +177,8 @@ void xen_mc_flush(void)
 	}
 	b->cbidx = 0;
 
+	local_irq_restore(flags);
+
 	WARN_ON(ret);
 }
 
-- 
cgit v1.2.3


From 3bd25d0fa3ed588a6735b815cb0c146c23888ace Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 15 Feb 2009 02:54:03 -0800
Subject: x86: pre init pirq_entries[]

Impact: cleanup

set default value early - this allows the removal of a number
of dynamic initialization codepaths, and an #ifdef.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/io_apic.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 0b7cde3da48..a89878e08a4 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -813,8 +813,9 @@ static void clear_IO_APIC (void)
  */
 
 #define MAX_PIRQS 8
-static int pirq_entries [MAX_PIRQS];
-static int pirqs_enabled;
+static int pirq_entries[MAX_PIRQS] = {
+	[0 ... MAX_PIRQS - 1] = -1
+};
 
 static int __init ioapic_pirq_setup(char *str)
 {
@@ -823,10 +824,6 @@ static int __init ioapic_pirq_setup(char *str)
 
 	get_options(str, ARRAY_SIZE(ints), ints);
 
-	for (i = 0; i < MAX_PIRQS; i++)
-		pirq_entries[i] = -1;
-
-	pirqs_enabled = 1;
 	apic_printk(APIC_VERBOSE, KERN_INFO
 			"PIRQ redirection, working around broken MP-BIOS.\n");
 	max = MAX_PIRQS;
@@ -1976,13 +1973,6 @@ void __init enable_IO_APIC(void)
 	int apic;
 	unsigned long flags;
 
-#ifdef CONFIG_X86_32
-	int i;
-	if (!pirqs_enabled)
-		for (i = 0; i < MAX_PIRQS; i++)
-			pirq_entries[i] = -1;
-#endif
-
 	/*
 	 * The number of IO-APIC IRQ registers (== #pins):
 	 */
-- 
cgit v1.2.3


From 98c061b6cf2e7a1010286a7a4f672c4623e1b3e0 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 16 Feb 2009 00:00:50 -0800
Subject: x86: make APIC_init_uniprocessor() more like smp_prepare_cpus()

Impact: cleanup

1. move localise_nmi_watchdog() later
2. change setup_boot_APIC_clock() to setup_boot_clock() for 64-bit

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index b8616aaa168..c03f4cc135c 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1649,32 +1649,28 @@ int __init APIC_init_uniprocessor(void)
 #ifdef CONFIG_X86_IO_APIC
 	/*
 	 * Now enable IO-APICs, actually call clear_IO_APIC
-	 * We need clear_IO_APIC before enabling vector on BP
+	 * We need clear_IO_APIC before enabling error vector
 	 */
 	if (!skip_ioapic_setup && nr_ioapics)
 		enable_IO_APIC();
-
-	if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
-		localise_nmi_watchdog();
-#else
-	localise_nmi_watchdog();
 #endif
+
 	end_local_APIC_setup();
 
 #ifdef CONFIG_X86_IO_APIC
 	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
 		setup_IO_APIC();
-# ifdef CONFIG_X86_64
-	else
+	else {
 		nr_ioapics = 0;
-# endif
+		localise_nmi_watchdog();
+	}
+#else
+	localise_nmi_watchdog();
 #endif
 
+	setup_boot_clock();
 #ifdef CONFIG_X86_64
-	setup_boot_APIC_clock();
 	check_nmi_watchdog();
-#else
-	setup_boot_clock();
 #endif
 
 	return 0;
-- 
cgit v1.2.3


From ee8b53c1cfe33aecf0c77c0aa3ce437f0d84d831 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 12:20:13 +0100
Subject: x86: remove stale arch/x86/include/asm/page_64.h.rej file

Introduced by:

  51c78eb: x86: create _types.h counterparts for page*.h

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/page_64.h.rej | 114 -------------------------------------
 1 file changed, 114 deletions(-)
 delete mode 100644 arch/x86/include/asm/page_64.h.rej

(limited to 'arch')

diff --git a/arch/x86/include/asm/page_64.h.rej b/arch/x86/include/asm/page_64.h.rej
deleted file mode 100644
index 9b1807f1859..00000000000
--- a/arch/x86/include/asm/page_64.h.rej
+++ /dev/null
@@ -1,114 +0,0 @@
-***************
-*** 1,105 ****
-  #ifndef _ASM_X86_PAGE_64_H
-  #define _ASM_X86_PAGE_64_H
-  
-- #define PAGETABLE_LEVELS	4
-- 
-- #define THREAD_ORDER	1
-- #define THREAD_SIZE  (PAGE_SIZE << THREAD_ORDER)
-- #define CURRENT_MASK (~(THREAD_SIZE - 1))
-- 
-- #define EXCEPTION_STACK_ORDER 0
-- #define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
-- 
-- #define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
-- #define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
-- 
-- #define IRQSTACK_ORDER 2
-- #define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
-- 
-- #define STACKFAULT_STACK 1
-- #define DOUBLEFAULT_STACK 2
-- #define NMI_STACK 3
-- #define DEBUG_STACK 4
-- #define MCE_STACK 5
-- #define N_EXCEPTION_STACKS 5  /* hw limit: 7 */
-- 
-- #define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-- #define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
-- 
-- /*
--  * Set __PAGE_OFFSET to the most negative possible address +
--  * PGDIR_SIZE*16 (pgd slot 272).  The gap is to allow a space for a
--  * hypervisor to fit.  Choosing 16 slots here is arbitrary, but it's
--  * what Xen requires.
--  */
-- #define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
-- 
-- #define __PHYSICAL_START	CONFIG_PHYSICAL_START
-- #define __KERNEL_ALIGN		0x200000
-- 
-- /*
--  * Make sure kernel is aligned to 2MB address. Catching it at compile
--  * time is better. Change your config file and compile the kernel
--  * for a 2MB aligned address (CONFIG_PHYSICAL_START)
--  */
-- #if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-- #error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-- #endif
-- 
-- #define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
-- #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
-- 
-- /* See Documentation/x86_64/mm.txt for a description of the memory map. */
-- #define __PHYSICAL_MASK_SHIFT	46
-- #define __VIRTUAL_MASK_SHIFT	48
-- 
-- /*
--  * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
--  * arch/x86/kernel/head_64.S), and it is mapped here:
--  */
-- #define KERNEL_IMAGE_SIZE	(512 * 1024 * 1024)
-- #define KERNEL_IMAGE_START	_AC(0xffffffff80000000, UL)
-- 
-- #ifndef __ASSEMBLY__
-- void clear_page(void *page);
-- void copy_page(void *to, void *from);
-- 
-- /* duplicated to the one in bootmem.h */
-- extern unsigned long max_pfn;
-- extern unsigned long phys_base;
-- 
-- extern unsigned long __phys_addr(unsigned long);
-- #define __phys_reloc_hide(x)	(x)
-- 
-- /*
--  * These are used to make use of C type-checking..
--  */
-- typedef unsigned long	pteval_t;
-- typedef unsigned long	pmdval_t;
-- typedef unsigned long	pudval_t;
-- typedef unsigned long	pgdval_t;
-- typedef unsigned long	pgprotval_t;
-- 
-- typedef struct page *pgtable_t;
-- 
-- typedef struct { pteval_t pte; } pte_t;
-- 
-- #define vmemmap ((struct page *)VMEMMAP_START)
-- 
-- extern unsigned long init_memory_mapping(unsigned long start,
-- 					 unsigned long end);
-- 
-- extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
-- extern void free_initmem(void);
-- 
-- extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
-- extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
-- 
-- #endif	/* !__ASSEMBLY__ */
-- 
-- #ifdef CONFIG_FLATMEM
-- #define pfn_valid(pfn)          ((pfn) < max_pfn)
-- #endif
-- 
-  
-  #endif /* _ASM_X86_PAGE_64_H */
---- 1,6 ----
-  #ifndef _ASM_X86_PAGE_64_H
-  #define _ASM_X86_PAGE_64_H
-  
-+ #include <asm/page_64_types.h>
-  
-  #endif /* _ASM_X86_PAGE_64_H */
-- 
cgit v1.2.3


From 06cd9a7dc8a58186060a91b6ddc031057435fd34 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 16 Feb 2009 17:29:58 -0800
Subject: x86: add x2apic config

Impact: cleanup

so could deselect x2apic
and INTR_REMAP will select x2apic

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig             | 15 +++++++++++++++
 arch/x86/include/asm/apic.h  | 18 +++++++++++++++---
 arch/x86/kernel/Makefile     |  4 ++--
 arch/x86/kernel/apic.c       | 24 ++++++++++++------------
 arch/x86/kernel/cpu/common.c |  2 +-
 arch/x86/kernel/genapic_64.c |  4 ++++
 arch/x86/kernel/setup.c      |  3 +--
 arch/x86/kernel/smpboot.c    |  2 +-
 8 files changed, 51 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1042d69b267..bce241fe1d2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -235,6 +235,20 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config X86_X2APIC
+	bool "Support x2apic"
+	depends on X86_LOCAL_APIC && X86_64
+	---help---
+	  This enables x2apic support on CPUs that have this feature.
+
+	  This allows 32-bit apic IDs (so it can support very large systems),
+	  and accesses the local apic via MSRs not via mmio.
+
+	  ( On certain CPU models you may need to enable INTR_REMAP too,
+	    to get functional x2apic mode. )
+
+	  If you don't know what to do here, say N.
+
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
 	depends on PCI_MSI || HT_IRQ
@@ -1828,6 +1842,7 @@ config DMAR_FLOPPY_WA
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
+	select X86_X2APIC
 	---help---
 	  Supports Interrupt remapping for IO-APIC and MSI devices.
 	  To use x2apic mode in the CPU's which support x2APIC enhancements or
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index fba49f66228..dc1db99cd40 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -112,7 +112,7 @@ static inline u32 native_apic_msr_read(u32 reg)
 	return low;
 }
 
-#ifndef CONFIG_X86_32
+#ifdef CONFIG_X86_X2APIC
 extern int x2apic;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
@@ -131,7 +131,19 @@ static inline int x2apic_enabled(void)
 	return 0;
 }
 #else
-#define x2apic_enabled()	0
+static inline void check_x2apic(void)
+{
+}
+static inline void enable_x2apic(void)
+{
+}
+static inline void enable_IR_x2apic(void)
+{
+}
+static inline int x2apic_enabled(void)
+{
+	return 0;
+}
 #endif
 
 struct apic_ops {
@@ -177,7 +189,7 @@ static inline u32 safe_apic_wait_icr_idle(void)
 
 extern int get_physical_broadcast(void);
 
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_X2APIC
 static inline void ack_x2APIC_irq(void)
 {
 	/* Docs say use 0 for future compatibility */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 24f357e7557..1cefd218f76 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -117,8 +117,8 @@ obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb_64.o # NB rename without _64
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o
-        obj-y				+= genx2apic_cluster.o
-        obj-y				+= genx2apic_phys.o
+        obj-$(CONFIG_X86_X2APIC)	+= genx2apic_cluster.o
+        obj-$(CONFIG_X86_X2APIC)	+= genx2apic_phys.o
 	obj-$(CONFIG_X86_UV)		+= genx2apic_uv_x.o tlb_uv.o
 	obj-$(CONFIG_X86_UV)		+= bios_uv.o uv_irq.o uv_sysfs.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index a894eea9d51..004aa1c31e4 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -112,11 +112,7 @@ static __init int setup_apicpmtimer(char *s)
 __setup("apicpmtimer", setup_apicpmtimer);
 #endif
 
-#ifdef CONFIG_X86_64
-#define HAVE_X2APIC
-#endif
-
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
 int x2apic;
 /* x2apic enabled before OS handover */
 static int x2apic_preenabled;
@@ -269,7 +265,7 @@ static struct apic_ops xapic_ops = {
 struct apic_ops __read_mostly *apic_ops = &xapic_ops;
 EXPORT_SYMBOL_GPL(apic_ops);
 
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
 static void x2apic_wait_icr_idle(void)
 {
 	/* no need to wait for icr idle in x2apic */
@@ -1320,11 +1316,14 @@ void __cpuinit end_local_APIC_setup(void)
 	apic_pm_activate();
 }
 
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
 void check_x2apic(void)
 {
 	int msr, msr2;
 
+	if (!cpu_has_x2apic)
+		return;
+
 	rdmsr(MSR_IA32_APICBASE, msr, msr2);
 
 	if (msr & X2APIC_ENABLE) {
@@ -1338,6 +1337,9 @@ void enable_x2apic(void)
 {
 	int msr, msr2;
 
+	if (!x2apic)
+		return;
+
 	rdmsr(MSR_IA32_APICBASE, msr, msr2);
 	if (!(msr & X2APIC_ENABLE)) {
 		pr_info("Enabling x2apic\n");
@@ -1439,7 +1441,7 @@ end:
 
 	return;
 }
-#endif /* HAVE_X2APIC */
+#endif /* CONFIG_X86_X2APIC */
 
 #ifdef CONFIG_X86_64
 /*
@@ -1570,7 +1572,7 @@ void __init early_init_lapic_mapping(void)
  */
 void __init init_apic_mappings(void)
 {
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
 	if (x2apic) {
 		boot_cpu_physical_apicid = read_apic_id();
 		return;
@@ -1634,9 +1636,7 @@ int __init APIC_init_uniprocessor(void)
 	}
 #endif
 
-#ifdef HAVE_X2APIC
 	enable_IR_x2apic();
-#endif
 #ifdef CONFIG_X86_64
 	default_setup_apic_routing();
 #endif
@@ -2021,7 +2021,7 @@ static int lapic_resume(struct sys_device *dev)
 
 	local_irq_save(flags);
 
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
 	if (x2apic)
 		enable_x2apic();
 	else
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4db150ed446..4b5d13e472d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1051,7 +1051,7 @@ void __cpuinit cpu_init(void)
 	barrier();
 
 	check_efer();
-	if (cpu != 0 && x2apic)
+	if (cpu != 0)
 		enable_x2apic();
 
 	/*
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 820dea5d0eb..cdc4772d9c8 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -35,8 +35,10 @@ static struct genapic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_UV
 	&apic_x2apic_uv_x,
 #endif
+#ifdef CONFIG_X86_X2APIC
 	&apic_x2apic_phys,
 	&apic_x2apic_cluster,
+#endif
 	&apic_physflat,
 	NULL,
 };
@@ -46,10 +48,12 @@ static struct genapic *apic_probe[] __initdata = {
  */
 void __init default_setup_apic_routing(void)
 {
+#ifdef CONFIG_X86_X2APIC
 	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
 		if (!intr_remapping_enabled)
 			apic = &apic_flat;
 	}
+#endif
 
 	if (apic == &apic_flat) {
 		if (max_physical_apicid >= 8)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 8fce6c71451..43d964411c0 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -836,8 +836,7 @@ void __init setup_arch(char **cmdline_p)
 #else
 	num_physpages = max_pfn;
 
- 	if (cpu_has_x2apic)
- 		check_x2apic();
+	check_x2apic();
 
 	/* How many end-of-memory variables you have, grandma! */
 	/* need this before calling reserve_initrd */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 10834954e30..b5f2b698973 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1128,8 +1128,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	current_thread_info()->cpu = 0;  /* needed? */
 	set_cpu_sibling_map(0);
 
-#ifdef CONFIG_X86_64
 	enable_IR_x2apic();
+#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
 #endif
 
-- 
cgit v1.2.3


From c1eeb2de41d7015678bdd412b48a5f071b84e29a Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 16 Feb 2009 23:02:14 -0800
Subject: x86: fold apic_ops into genapic

Impact: cleanup

make it simpler, don't need have one extra struct.

v2: fix the sgi_uv build

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h               | 97 ++++++++++---------------------
 arch/x86/include/asm/genapic.h            | 61 +++++++++++++++++++
 arch/x86/kernel/apic.c                    | 63 ++------------------
 arch/x86/kernel/bigsmp_32.c               |  7 +++
 arch/x86/kernel/cpu/mcheck/mce_amd_64.c   |  2 +-
 arch/x86/kernel/cpu/mcheck/mce_intel_64.c |  2 +-
 arch/x86/kernel/cpu/perfctr-watchdog.c    |  2 +-
 arch/x86/kernel/es7000_32.c               |  7 +++
 arch/x86/kernel/genapic_64.c              |  2 +-
 arch/x86/kernel/genapic_flat_64.c         | 16 ++++-
 arch/x86/kernel/genx2apic_cluster.c       | 11 +++-
 arch/x86/kernel/genx2apic_phys.c          | 11 +++-
 arch/x86/kernel/genx2apic_uv_x.c          |  9 ++-
 arch/x86/kernel/ipi.c                     |  2 +-
 arch/x86/kernel/irq.c                     |  2 +-
 arch/x86/kernel/nmi.c                     |  2 +-
 arch/x86/kernel/numaq_32.c                |  7 +++
 arch/x86/kernel/probe_32.c                |  7 +++
 arch/x86/kernel/summit_32.c               |  7 +++
 arch/x86/kernel/uv_irq.c                  |  2 +-
 arch/x86/kernel/vmi_32.c                  |  6 +-
 arch/x86/kernel/vmiclock_32.c             |  2 +-
 arch/x86/lguest/boot.c                    | 19 +++---
 arch/x86/xen/enlighten.c                  | 21 +++----
 24 files changed, 205 insertions(+), 162 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index dc1db99cd40..4f56e053d34 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -92,6 +92,12 @@ static inline u32 native_apic_mem_read(u32 reg)
 	return *((volatile u32 *)(APIC_BASE + reg));
 }
 
+extern void native_apic_wait_icr_idle(void);
+extern u32 native_safe_apic_wait_icr_idle(void);
+extern void native_apic_icr_write(u32 low, u32 id);
+extern u64 native_apic_icr_read(void);
+
+#ifdef CONFIG_X86_X2APIC
 static inline void native_apic_msr_write(u32 reg, u32 v)
 {
 	if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
@@ -112,7 +118,31 @@ static inline u32 native_apic_msr_read(u32 reg)
 	return low;
 }
 
-#ifdef CONFIG_X86_X2APIC
+static inline void native_x2apic_wait_icr_idle(void)
+{
+	/* no need to wait for icr idle in x2apic */
+	return;
+}
+
+static inline u32 native_safe_x2apic_wait_icr_idle(void)
+{
+	/* no need to wait for icr idle in x2apic */
+	return 0;
+}
+
+static inline void native_x2apic_icr_write(u32 low, u32 id)
+{
+	wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
+}
+
+static inline u64 native_x2apic_icr_read(void)
+{
+	unsigned long val;
+
+	rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
+	return val;
+}
+
 extern int x2apic;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
@@ -146,47 +176,6 @@ static inline int x2apic_enabled(void)
 }
 #endif
 
-struct apic_ops {
-	u32 (*read)(u32 reg);
-	void (*write)(u32 reg, u32 v);
-	u64 (*icr_read)(void);
-	void (*icr_write)(u32 low, u32 high);
-	void (*wait_icr_idle)(void);
-	u32 (*safe_wait_icr_idle)(void);
-};
-
-extern struct apic_ops *apic_ops;
-
-static inline u32 apic_read(u32 reg)
-{
-	return apic_ops->read(reg);
-}
-
-static inline void apic_write(u32 reg, u32 val)
-{
-	apic_ops->write(reg, val);
-}
-
-static inline u64 apic_icr_read(void)
-{
-	return apic_ops->icr_read();
-}
-
-static inline void apic_icr_write(u32 low, u32 high)
-{
-	apic_ops->icr_write(low, high);
-}
-
-static inline void apic_wait_icr_idle(void)
-{
-	apic_ops->wait_icr_idle();
-}
-
-static inline u32 safe_apic_wait_icr_idle(void)
-{
-	return apic_ops->safe_wait_icr_idle();
-}
-
 extern int get_physical_broadcast(void);
 
 #ifdef CONFIG_X86_X2APIC
@@ -197,18 +186,6 @@ static inline void ack_x2APIC_irq(void)
 }
 #endif
 
-
-static inline void ack_APIC_irq(void)
-{
-	/*
-	 * ack_APIC_irq() actually gets compiled as a single instruction
-	 * ... yummie.
-	 */
-
-	/* Docs say use 0 for future compatibility */
-	apic_write(APIC_EOI, 0);
-}
-
 extern int lapic_get_maxlvt(void);
 extern void clear_local_APIC(void);
 extern void connect_bsp_APIC(void);
@@ -256,18 +233,6 @@ static inline void disable_local_APIC(void) { }
 #define	SET_APIC_ID(x)		(apic->set_apic_id(x))
 #else
 
-#ifdef CONFIG_X86_LOCAL_APIC
-static inline unsigned default_get_apic_id(unsigned long x)
-{
-	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
-
-	if (APIC_XAPIC(ver))
-		return (x >> 24) & 0xFF;
-	else
-		return (x >> 24) & 0x0F;
-}
-#endif
-
 #endif
 
 #endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 273b99452ae..a6d0b00a544 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -5,6 +5,7 @@
 
 #include <asm/mpspec.h>
 #include <asm/atomic.h>
+#include <asm/apic.h>
 
 /*
  * Copyright 2004 James Cleverdon, IBM.
@@ -83,10 +84,70 @@ struct genapic {
 	void (*smp_callin_clear_local_apic)(void);
 	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
 	void (*inquire_remote_apic)(int apicid);
+
+	/* apic ops */
+	u32 (*read)(u32 reg);
+	void (*write)(u32 reg, u32 v);
+	u64 (*icr_read)(void);
+	void (*icr_write)(u32 low, u32 high);
+	void (*wait_icr_idle)(void);
+	u32 (*safe_wait_icr_idle)(void);
 };
 
 extern struct genapic *apic;
 
+static inline u32 apic_read(u32 reg)
+{
+	return apic->read(reg);
+}
+
+static inline void apic_write(u32 reg, u32 val)
+{
+	apic->write(reg, val);
+}
+
+static inline u64 apic_icr_read(void)
+{
+	return apic->icr_read();
+}
+
+static inline void apic_icr_write(u32 low, u32 high)
+{
+	apic->icr_write(low, high);
+}
+
+static inline void apic_wait_icr_idle(void)
+{
+	apic->wait_icr_idle();
+}
+
+static inline u32 safe_apic_wait_icr_idle(void)
+{
+	return apic->safe_wait_icr_idle();
+}
+
+
+static inline void ack_APIC_irq(void)
+{
+	/*
+	 * ack_APIC_irq() actually gets compiled as a single instruction
+	 * ... yummie.
+	 */
+
+	/* Docs say use 0 for future compatibility */
+	apic_write(APIC_EOI, 0);
+}
+
+static inline unsigned default_get_apic_id(unsigned long x)
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+
+	if (APIC_XAPIC(ver))
+		return (x >> 24) & 0xFF;
+	else
+		return (x >> 24) & 0x0F;
+}
+
 /*
  * Warm reset vector default position:
  */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 004aa1c31e4..af494bad885 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -210,18 +210,13 @@ static int modern_apic(void)
 	return lapic_get_version() >= 0x14;
 }
 
-/*
- * Paravirt kernels also might be using these below ops. So we still
- * use generic apic_read()/apic_write(), which might be pointing to different
- * ops in PARAVIRT case.
- */
-void xapic_wait_icr_idle(void)
+void native_apic_wait_icr_idle(void)
 {
 	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
 		cpu_relax();
 }
 
-u32 safe_xapic_wait_icr_idle(void)
+u32 native_safe_apic_wait_icr_idle(void)
 {
 	u32 send_status;
 	int timeout;
@@ -237,13 +232,13 @@ u32 safe_xapic_wait_icr_idle(void)
 	return send_status;
 }
 
-void xapic_icr_write(u32 low, u32 id)
+void native_apic_icr_write(u32 low, u32 id)
 {
 	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
 	apic_write(APIC_ICR, low);
 }
 
-static u64 xapic_icr_read(void)
+u64 native_apic_icr_read(void)
 {
 	u32 icr1, icr2;
 
@@ -253,54 +248,6 @@ static u64 xapic_icr_read(void)
 	return icr1 | ((u64)icr2 << 32);
 }
 
-static struct apic_ops xapic_ops = {
-	.read = native_apic_mem_read,
-	.write = native_apic_mem_write,
-	.icr_read = xapic_icr_read,
-	.icr_write = xapic_icr_write,
-	.wait_icr_idle = xapic_wait_icr_idle,
-	.safe_wait_icr_idle = safe_xapic_wait_icr_idle,
-};
-
-struct apic_ops __read_mostly *apic_ops = &xapic_ops;
-EXPORT_SYMBOL_GPL(apic_ops);
-
-#ifdef CONFIG_X86_X2APIC
-static void x2apic_wait_icr_idle(void)
-{
-	/* no need to wait for icr idle in x2apic */
-	return;
-}
-
-static u32 safe_x2apic_wait_icr_idle(void)
-{
-	/* no need to wait for icr idle in x2apic */
-	return 0;
-}
-
-void x2apic_icr_write(u32 low, u32 id)
-{
-	wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
-}
-
-static u64 x2apic_icr_read(void)
-{
-	unsigned long val;
-
-	rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
-	return val;
-}
-
-static struct apic_ops x2apic_ops = {
-	.read = native_apic_msr_read,
-	.write = native_apic_msr_write,
-	.icr_read = x2apic_icr_read,
-	.icr_write = x2apic_icr_write,
-	.wait_icr_idle = x2apic_wait_icr_idle,
-	.safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
-};
-#endif
-
 /**
  * enable_NMI_through_LVT0 - enable NMI through local vector table 0
  */
@@ -1329,7 +1276,6 @@ void check_x2apic(void)
 	if (msr & X2APIC_ENABLE) {
 		pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
 		x2apic_preenabled = x2apic = 1;
-		apic_ops = &x2apic_ops;
 	}
 }
 
@@ -1403,7 +1349,6 @@ void __init enable_IR_x2apic(void)
 
 	if (!x2apic) {
 		x2apic = 1;
-		apic_ops = &x2apic_ops;
 		enable_x2apic();
 	}
 
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 47a62f46afd..9eeb714c5de 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -263,4 +263,11 @@ struct genapic apic_bigsmp = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 4772e91e824..e22d6ed26e6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -24,7 +24,7 @@
 #include <linux/smp.h>
 #include <linux/sysdev.h>
 #include <linux/sysfs.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/percpu.h>
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 5e8c79e748a..42f090702f0 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -7,7 +7,7 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <asm/processor.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/msr.h>
 #include <asm/mce.h>
 #include <asm/hw_irq.h>
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 9abd48b2267..f6c70a164e3 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -19,7 +19,7 @@
 #include <linux/nmi.h>
 #include <linux/kprobes.h>
 
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/intel_arch_perfmon.h>
 
 struct nmi_watchdog_ctlblk {
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 55515d73d9c..23f1df4ce18 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -806,4 +806,11 @@ struct genapic apic_es7000 = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index cdc4772d9c8..70b616b4c62 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -19,8 +19,8 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/ipi.h>
 #include <asm/setup.h>
 
 extern struct genapic apic_flat;
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 249d2d3c034..36ee760fd13 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -17,8 +17,8 @@
 #include <linux/init.h>
 #include <linux/hardirq.h>
 #include <asm/smp.h>
-#include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/ipi.h>
 
 #ifdef CONFIG_ACPI
 #include <acpi/acpi_bus.h>
@@ -229,6 +229,13 @@ struct genapic apic_flat =  {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
 
 /*
@@ -374,4 +381,11 @@ struct genapic apic_physflat =  {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index 7c87156b641..dd6e8d68542 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -7,8 +7,8 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/ipi.h>
 
 DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 
@@ -46,7 +46,7 @@ static void
 	/*
 	 * send the IPI.
 	 */
-	x2apic_icr_write(cfg, apicid);
+	native_x2apic_icr_write(cfg, apicid);
 }
 
 /*
@@ -234,4 +234,11 @@ struct genapic apic_x2apic_cluster = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_msr_read,
+	.write				= native_apic_msr_write,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= native_x2apic_icr_write,
+	.wait_icr_idle			= native_x2apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 5cbae8aa040..eb1486bb002 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -7,8 +7,8 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/ipi.h>
 
 static int x2apic_phys;
 
@@ -50,7 +50,7 @@ static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
 	/*
 	 * send the IPI.
 	 */
-	x2apic_icr_write(cfg, apicid);
+	native_x2apic_icr_write(cfg, apicid);
 }
 
 static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
@@ -220,4 +220,11 @@ struct genapic apic_x2apic_phys = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_msr_read,
+	.write				= native_apic_msr_write,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= native_x2apic_icr_write,
+	.wait_icr_idle			= native_x2apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 89b84e004f0..9ae4a92fac8 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -22,8 +22,8 @@
 #include <linux/proc_fs.h>
 #include <asm/current.h>
 #include <asm/smp.h>
-#include <asm/ipi.h>
 #include <asm/genapic.h>
+#include <asm/ipi.h>
 #include <asm/pgtable.h>
 #include <asm/uv/uv.h>
 #include <asm/uv/uv_mmrs.h>
@@ -292,6 +292,13 @@ struct genapic apic_x2apic_uv_x = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_msr_read,
+	.write				= native_apic_msr_write,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= native_x2apic_icr_write,
+	.wait_icr_idle			= native_x2apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
 };
 
 static __cpuinit void set_x2apic_extra_bits(int pnode)
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index dbf5445727a..1326272cae4 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -15,7 +15,7 @@
 #include <asm/mtrr.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/proto.h>
 #include <asm/ipi.h>
 
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index f13ca1650aa..3957776b193 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -8,7 +8,7 @@
 #include <linux/smp.h>
 #include <linux/ftrace.h>
 
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/io_apic.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index bdfad80c3cf..48b9ca5e088 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -11,7 +11,7 @@
  *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
  */
 
-#include <asm/apic.h>
+#include <asm/genapic.h>
 
 #include <linux/nmi.h>
 #include <linux/mm.h>
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 0cc41a1d255..f0f0c2f0596 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -569,4 +569,11 @@ struct genapic apic_numaq = {
 	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
 	.store_NMI_vector		= numaq_store_NMI_vector,
 	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index 22337b75de6..1f701caa95b 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -127,6 +127,13 @@ struct genapic apic_default = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
 
 extern struct genapic apic_numaq;
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 1e733eff9b3..1cf32c325d1 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -599,4 +599,11 @@ struct genapic apic_summit = {
 	.smp_callin_clear_local_apic	= NULL,
 	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c
index aeef529917e..75eb5ec5dd2 100644
--- a/arch/x86/kernel/uv_irq.c
+++ b/arch/x86/kernel/uv_irq.c
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/uv/uv_irq.h>
 
 static void uv_noop(unsigned int irq)
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index f052c84ecbe..a1c7b71dc0d 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -32,7 +32,7 @@
 #include <asm/io.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
@@ -798,8 +798,8 @@ static inline int __init activate_vmi(void)
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-       para_fill(apic_ops->read, APICRead);
-       para_fill(apic_ops->write, APICWrite);
+       para_fill(apic->read, APICRead);
+       para_fill(apic->write, APICWrite);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index a4791ef412d..2a5e0e6a7c0 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -30,7 +30,7 @@
 #include <asm/vmi_time.h>
 #include <asm/arch_hooks.h>
 #include <asm/apicdef.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/timer.h>
 #include <asm/i8253.h>
 #include <asm/irq_vectors.h>
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index da2e314f61b..bc9893f2c38 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -55,7 +55,7 @@
 #include <linux/lguest_launcher.h>
 #include <linux/virtio_console.h>
 #include <linux/pm.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/lguest.h>
 #include <asm/paravirt.h>
 #include <asm/param.h>
@@ -828,13 +828,14 @@ static u32 lguest_apic_safe_wait_icr_idle(void)
 	return 0;
 }
 
-static struct apic_ops lguest_basic_apic_ops = {
-	.read = lguest_apic_read,
-	.write = lguest_apic_write,
-	.icr_read = lguest_apic_icr_read,
-	.icr_write = lguest_apic_icr_write,
-	.wait_icr_idle = lguest_apic_wait_icr_idle,
-	.safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle,
+static void set_lguest_basic_apic_ops(void)
+{
+	apic->read = lguest_apic_read;
+	apic->write = lguest_apic_write;
+	apic->icr_read = lguest_apic_icr_read;
+	apic->icr_write = lguest_apic_icr_write;
+	apic->wait_icr_idle = lguest_apic_wait_icr_idle;
+	apic->safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle;
 };
 #endif
 
@@ -1035,7 +1036,7 @@ __init void lguest_init(void)
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* apic read/write intercepts */
-	apic_ops = &lguest_basic_apic_ops;
+	set_lguest_basic_apic_ops();
 #endif
 
 	/* time operations */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 95ff6a0e942..e3dd3fb6729 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -36,7 +36,7 @@
 #include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/page.h>
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -554,14 +554,15 @@ static u32 xen_safe_apic_wait_icr_idle(void)
         return 0;
 }
 
-static struct apic_ops xen_basic_apic_ops = {
-	.read = xen_apic_read,
-	.write = xen_apic_write,
-	.icr_read = xen_apic_icr_read,
-	.icr_write = xen_apic_icr_write,
-	.wait_icr_idle = xen_apic_wait_icr_idle,
-	.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
-};
+static void set_xen_basic_apic_ops(void)
+{
+	apic->read = xen_apic_read;
+	apic->write = xen_apic_write;
+	apic->icr_read = xen_apic_icr_read;
+	apic->icr_write = xen_apic_icr_write;
+	apic->wait_icr_idle = xen_apic_wait_icr_idle;
+	apic->safe_wait_icr_idle = xen_safe_apic_wait_icr_idle;
+}
 
 #endif
 
@@ -898,7 +899,7 @@ asmlinkage void __init xen_start_kernel(void)
 	/*
 	 * set up the basic apic ops.
 	 */
-	apic_ops = &xen_basic_apic_ops;
+	set_xen_basic_apic_ops();
 #endif
 
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
-- 
cgit v1.2.3


From 7d01d32d3b9becd6deba318b718db3d9fc181d23 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 12:33:20 +0100
Subject: x86, apic: fix build fallout of genapic changes

- make oprofile build
- select X86_X2APIC from X86_UV - it relies on it
- export genapic for oprofile modular build

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                  | 1 +
 arch/x86/kernel/cpu/mcheck/p4.c   | 2 +-
 arch/x86/kernel/genapic_64.c      | 1 +
 arch/x86/kernel/probe_32.c        | 2 ++
 arch/x86/oprofile/nmi_int.c       | 2 +-
 arch/x86/oprofile/op_model_p4.c   | 2 +-
 arch/x86/oprofile/op_model_ppro.c | 2 +-
 7 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bce241fe1d2..8955262caa3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -316,6 +316,7 @@ config X86_UV
 	bool "SGI Ultraviolet"
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
+	select X86_X2APIC
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index 9b60fce09f7..f9c92b66dfb 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -11,7 +11,7 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 
 #include <asm/therm_throt.h>
 
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 70b616b4c62..ef788635324 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -30,6 +30,7 @@ extern struct genapic apic_x2apic_phys;
 extern struct genapic apic_x2apic_cluster;
 
 struct genapic __read_mostly *apic = &apic_flat;
+EXPORT_SYMBOL_GPL(apic);
 
 static struct genapic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_UV
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index 1f701caa95b..6e31b17d546 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -8,6 +8,7 @@
  */
 #include <linux/threads.h>
 #include <linux/cpumask.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/ctype.h>
@@ -143,6 +144,7 @@ extern struct genapic apic_es7000;
 extern struct genapic apic_default;
 
 struct genapic *apic = &apic_default;
+EXPORT_SYMBOL_GPL(apic);
 
 static struct genapic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_NUMAQ
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 202864ad49a..a32a5c7a8ef 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -19,7 +19,7 @@
 #include <linux/cpu.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 
 #include "op_counter.h"
 #include "op_x86_model.h"
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 4c4a51c90bc..09a237bc9ef 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -14,7 +14,7 @@
 #include <linux/nmi.h>
 #include <asm/msr.h>
 #include <asm/fixmap.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 
 
 #include "op_x86_model.h"
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index e9f80c744cf..5ebd8f605d7 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -16,7 +16,7 @@
 #include <linux/slab.h>
 #include <asm/ptrace.h>
 #include <asm/msr.h>
-#include <asm/apic.h>
+#include <asm/genapic.h>
 #include <asm/nmi.h>
 #include <asm/intel_arch_perfmon.h>
 
-- 
cgit v1.2.3


From 28aa29eeb3918f820b914679cfc4404972f2df32 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 14:36:42 +0100
Subject: remove: genapic prepare

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/genapic.h | 13 +------------
 arch/x86/kernel/probe_32.c     |  9 +++++++++
 2 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index a6d0b00a544..9b874a38683 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -168,8 +168,6 @@ extern void apic_send_IPI_self(int vector);
 extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
-extern void default_setup_apic_routing(void);
-
 extern int default_cpu_present_to_apicid(int mps_cpu);
 extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
 #endif
@@ -211,10 +209,9 @@ static inline unsigned int read_apic_id(void)
 	return apic->get_apic_id(reg);
 }
 
-#ifdef CONFIG_X86_64
 extern void default_setup_apic_routing(void);
-#else
 
+#ifdef CONFIG_X86_32
 /*
  * Set up the logical destination ID.
  *
@@ -251,14 +248,6 @@ static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-static inline void default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-					"Flat", nr_ioapics);
-#endif
-}
-
 extern int default_apicid_to_node(int logical_apicid);
 
 #endif
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index 6e31b17d546..b3d5d74e522 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -53,6 +53,15 @@ int no_broadcast = DEFAULT_SEND_IPI;
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
+void default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	printk(KERN_INFO
+		"Enabling APIC mode:  Flat.  Using %d I/O APICs\n",
+		nr_ioapics);
+#endif
+}
+
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
 	/*
-- 
cgit v1.2.3


From e2780a68f889c9d7ec8e78d58a3a2be8cfebf202 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 13:52:29 +0100
Subject: x86, apic: merge genapic.h into apic.h

Impact: cleanup

Reduce the number of include files to worry about.
Also, most of the users of APIC facilities had to
include genapic.h already, which embedded apic.h,
so the distinction was meaningless.

[ include apic.h from genapic.h for compatibility. ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h    | 314 ++++++++++++++++++++++++++++++++++++++++-
 arch/x86/include/asm/genapic.h | 312 ----------------------------------------
 2 files changed, 310 insertions(+), 316 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 4f56e053d34..c07f5fbf43c 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -1,15 +1,18 @@
 #ifndef _ASM_X86_APIC_H
 #define _ASM_X86_APIC_H
 
-#include <linux/pm.h>
+#include <linux/cpumask.h>
 #include <linux/delay.h>
+#include <linux/pm.h>
 
 #include <asm/alternative.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
+#include <asm/cpufeature.h>
 #include <asm/processor.h>
+#include <asm/apicdef.h>
+#include <asm/atomic.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
 #include <asm/system.h>
-#include <asm/cpufeature.h>
 #include <asm/msr.h>
 
 #define ARCH_APICTIMER_STOPS_ON_C3	1
@@ -235,4 +238,307 @@ static inline void disable_local_APIC(void) { }
 
 #endif
 
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch data struct.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+struct genapic {
+	char *name;
+
+	int (*probe)(void);
+	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
+	int (*apic_id_registered)(void);
+
+	u32 irq_delivery_mode;
+	u32 irq_dest_mode;
+
+	const struct cpumask *(*target_cpus)(void);
+
+	int disable_esr;
+
+	int dest_logical;
+	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_present)(int apicid);
+
+	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
+	void (*init_apic_ldr)(void);
+
+	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+
+	void (*setup_apic_routing)(void);
+	int (*multi_timer_check)(int apic, int irq);
+	int (*apicid_to_node)(int logical_apicid);
+	int (*cpu_to_logical_apicid)(int cpu);
+	int (*cpu_present_to_apicid)(int mps_cpu);
+	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*setup_portio_remap)(void);
+	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	void (*enable_apic_mode)(void);
+	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
+
+	/*
+	 * When one of the next two hooks returns 1 the genapic
+	 * is switched to this. Essentially they are additional
+	 * probe functions:
+	 */
+	int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid);
+
+	unsigned int (*get_apic_id)(unsigned long x);
+	unsigned long (*set_apic_id)(unsigned int id);
+	unsigned long apic_id_mask;
+
+	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
+	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
+					       const struct cpumask *andmask);
+
+	/* ipi */
+	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
+	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
+					 int vector);
+	void (*send_IPI_allbutself)(int vector);
+	void (*send_IPI_all)(int vector);
+	void (*send_IPI_self)(int vector);
+
+	/* wakeup_secondary_cpu */
+	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
+
+	int trampoline_phys_low;
+	int trampoline_phys_high;
+
+	void (*wait_for_init_deassert)(atomic_t *deassert);
+	void (*smp_callin_clear_local_apic)(void);
+	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
+	void (*inquire_remote_apic)(int apicid);
+
+	/* apic ops */
+	u32 (*read)(u32 reg);
+	void (*write)(u32 reg, u32 v);
+	u64 (*icr_read)(void);
+	void (*icr_write)(u32 low, u32 high);
+	void (*wait_icr_idle)(void);
+	u32 (*safe_wait_icr_idle)(void);
+};
+
+extern struct genapic *apic;
+
+static inline u32 apic_read(u32 reg)
+{
+	return apic->read(reg);
+}
+
+static inline void apic_write(u32 reg, u32 val)
+{
+	apic->write(reg, val);
+}
+
+static inline u64 apic_icr_read(void)
+{
+	return apic->icr_read();
+}
+
+static inline void apic_icr_write(u32 low, u32 high)
+{
+	apic->icr_write(low, high);
+}
+
+static inline void apic_wait_icr_idle(void)
+{
+	apic->wait_icr_idle();
+}
+
+static inline u32 safe_apic_wait_icr_idle(void)
+{
+	return apic->safe_wait_icr_idle();
+}
+
+
+static inline void ack_APIC_irq(void)
+{
+	/*
+	 * ack_APIC_irq() actually gets compiled as a single instruction
+	 * ... yummie.
+	 */
+
+	/* Docs say use 0 for future compatibility */
+	apic_write(APIC_EOI, 0);
+}
+
+static inline unsigned default_get_apic_id(unsigned long x)
+{
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+
+	if (APIC_XAPIC(ver))
+		return (x >> 24) & 0xFF;
+	else
+		return (x >> 24) & 0x0F;
+}
+
+/*
+ * Warm reset vector default position:
+ */
+#define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
+#define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
+
+#ifdef CONFIG_X86_32
+extern void es7000_update_genapic_to_cluster(void);
+#else
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
+extern int default_acpi_madt_oem_check(char *, char *);
+
+extern void apic_send_IPI_self(int vector);
+
+extern struct genapic apic_x2apic_uv_x;
+DECLARE_PER_CPU(int, x2apic_extra_bits);
+
+extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
+#endif
+
+static inline void default_wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert))
+		cpu_relax();
+	return;
+}
+
+extern void generic_bigsmp_probe(void);
+
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline const struct cpumask *default_target_cpus(void)
+{
+#ifdef CONFIG_SMP
+	return cpu_online_mask;
+#else
+	return cpumask_of(0);
+#endif
+}
+
+DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
+
+
+static inline unsigned int read_apic_id(void)
+{
+	unsigned int reg;
+
+	reg = apic_read(APIC_ID);
+
+	return apic->get_apic_id(reg);
+}
+
+extern void default_setup_apic_routing(void);
+
+#ifdef CONFIG_X86_32
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+extern void default_init_apic_ldr(void);
+
+static inline int default_apic_id_registered(void)
+{
+	return physid_isset(read_apic_id(), phys_cpu_present_map);
+}
+
+static inline unsigned int
+default_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	return cpumask_bits(cpumask)[0];
+}
+
+static inline unsigned int
+default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			       const struct cpumask *andmask)
+{
+	unsigned long mask1 = cpumask_bits(cpumask)[0];
+	unsigned long mask2 = cpumask_bits(andmask)[0];
+	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
+
+	return (unsigned int)(mask1 & mask2 & mask3);
+}
+
+static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+extern int default_apicid_to_node(int logical_apicid);
+
+#endif
+
+static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long default_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int default_cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int __default_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline int
+__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+#ifdef CONFIG_X86_32
+static inline int default_cpu_present_to_apicid(int mps_cpu)
+{
+	return __default_cpu_present_to_apicid(mps_cpu);
+}
+
+static inline int
+default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+}
+#else
+extern int default_cpu_present_to_apicid(int mps_cpu);
+extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
+#endif
+
+static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
 #endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/include/asm/genapic.h b/arch/x86/include/asm/genapic.h
index 9b874a38683..4b8b98fa7f2 100644
--- a/arch/x86/include/asm/genapic.h
+++ b/arch/x86/include/asm/genapic.h
@@ -1,313 +1 @@
-#ifndef _ASM_X86_GENAPIC_H
-#define _ASM_X86_GENAPIC_H
-
-#include <linux/cpumask.h>
-
-#include <asm/mpspec.h>
-#include <asm/atomic.h>
 #include <asm/apic.h>
-
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch data struct.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-struct genapic {
-	char *name;
-
-	int (*probe)(void);
-	int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
-	int (*apic_id_registered)(void);
-
-	u32 irq_delivery_mode;
-	u32 irq_dest_mode;
-
-	const struct cpumask *(*target_cpus)(void);
-
-	int disable_esr;
-
-	int dest_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
-	unsigned long (*check_apicid_present)(int apicid);
-
-	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
-	void (*init_apic_ldr)(void);
-
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
-
-	void (*setup_apic_routing)(void);
-	int (*multi_timer_check)(int apic, int irq);
-	int (*apicid_to_node)(int logical_apicid);
-	int (*cpu_to_logical_apicid)(int cpu);
-	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
-	void (*setup_portio_remap)(void);
-	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
-	void (*enable_apic_mode)(void);
-	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
-
-	/*
-	 * When one of the next two hooks returns 1 the genapic
-	 * is switched to this. Essentially they are additional
-	 * probe functions:
-	 */
-	int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid);
-
-	unsigned int (*get_apic_id)(unsigned long x);
-	unsigned long (*set_apic_id)(unsigned int id);
-	unsigned long apic_id_mask;
-
-	unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask);
-	unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask,
-					       const struct cpumask *andmask);
-
-	/* ipi */
-	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
-	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
-					 int vector);
-	void (*send_IPI_allbutself)(int vector);
-	void (*send_IPI_all)(int vector);
-	void (*send_IPI_self)(int vector);
-
-	/* wakeup_secondary_cpu */
-	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
-
-	int trampoline_phys_low;
-	int trampoline_phys_high;
-
-	void (*wait_for_init_deassert)(atomic_t *deassert);
-	void (*smp_callin_clear_local_apic)(void);
-	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
-	void (*inquire_remote_apic)(int apicid);
-
-	/* apic ops */
-	u32 (*read)(u32 reg);
-	void (*write)(u32 reg, u32 v);
-	u64 (*icr_read)(void);
-	void (*icr_write)(u32 low, u32 high);
-	void (*wait_icr_idle)(void);
-	u32 (*safe_wait_icr_idle)(void);
-};
-
-extern struct genapic *apic;
-
-static inline u32 apic_read(u32 reg)
-{
-	return apic->read(reg);
-}
-
-static inline void apic_write(u32 reg, u32 val)
-{
-	apic->write(reg, val);
-}
-
-static inline u64 apic_icr_read(void)
-{
-	return apic->icr_read();
-}
-
-static inline void apic_icr_write(u32 low, u32 high)
-{
-	apic->icr_write(low, high);
-}
-
-static inline void apic_wait_icr_idle(void)
-{
-	apic->wait_icr_idle();
-}
-
-static inline u32 safe_apic_wait_icr_idle(void)
-{
-	return apic->safe_wait_icr_idle();
-}
-
-
-static inline void ack_APIC_irq(void)
-{
-	/*
-	 * ack_APIC_irq() actually gets compiled as a single instruction
-	 * ... yummie.
-	 */
-
-	/* Docs say use 0 for future compatibility */
-	apic_write(APIC_EOI, 0);
-}
-
-static inline unsigned default_get_apic_id(unsigned long x)
-{
-	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
-
-	if (APIC_XAPIC(ver))
-		return (x >> 24) & 0xFF;
-	else
-		return (x >> 24) & 0x0F;
-}
-
-/*
- * Warm reset vector default position:
- */
-#define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
-#define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
-
-#ifdef CONFIG_X86_32
-extern void es7000_update_genapic_to_cluster(void);
-#else
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
-extern struct genapic apic_x2apic_cluster;
-extern struct genapic apic_x2apic_phys;
-extern int default_acpi_madt_oem_check(char *, char *);
-
-extern void apic_send_IPI_self(int vector);
-
-extern struct genapic apic_x2apic_uv_x;
-DECLARE_PER_CPU(int, x2apic_extra_bits);
-
-extern int default_cpu_present_to_apicid(int mps_cpu);
-extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
-#endif
-
-static inline void default_wait_for_init_deassert(atomic_t *deassert)
-{
-	while (!atomic_read(deassert))
-		cpu_relax();
-	return;
-}
-
-extern void generic_bigsmp_probe(void);
-
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
-
-static inline const struct cpumask *default_target_cpus(void)
-{
-#ifdef CONFIG_SMP
-	return cpu_online_mask;
-#else
-	return cpumask_of(0);
-#endif
-}
-
-DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
-
-
-static inline unsigned int read_apic_id(void)
-{
-	unsigned int reg;
-
-	reg = apic_read(APIC_ID);
-
-	return apic->get_apic_id(reg);
-}
-
-extern void default_setup_apic_routing(void);
-
-#ifdef CONFIG_X86_32
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-extern void default_init_apic_ldr(void);
-
-static inline int default_apic_id_registered(void)
-{
-	return physid_isset(read_apic_id(), phys_cpu_present_map);
-}
-
-static inline unsigned int
-default_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	return cpumask_bits(cpumask)[0];
-}
-
-static inline unsigned int
-default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			       const struct cpumask *andmask)
-{
-	unsigned long mask1 = cpumask_bits(cpumask)[0];
-	unsigned long mask2 = cpumask_bits(andmask)[0];
-	unsigned long mask3 = cpumask_bits(cpu_online_mask)[0];
-
-	return (unsigned int)(mask1 & mask2 & mask3);
-}
-
-static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-extern int default_apicid_to_node(int logical_apicid);
-
-#endif
-
-static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long default_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	return phys_map;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int default_cpu_to_logical_apicid(int cpu)
-{
-	return 1 << cpu;
-}
-
-static inline int __default_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu))
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline int
-__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-#ifdef CONFIG_X86_32
-static inline int default_cpu_present_to_apicid(int mps_cpu)
-{
-	return __default_cpu_present_to_apicid(mps_cpu);
-}
-
-static inline int
-default_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
-}
-#else
-extern int default_cpu_present_to_apicid(int mps_cpu);
-extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
-#endif
-
-static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#endif /* _ASM_X86_GENAPIC_64_H */
-- 
cgit v1.2.3


From 7b6aa335ca1a845c2262ec7a595b4521bca0f79d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 13:58:15 +0100
Subject: x86, apic: remove genapic.h

Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/ipi.h                 | 2 +-
 arch/x86/kernel/acpi/boot.c                | 2 +-
 arch/x86/kernel/apic.c                     | 2 +-
 arch/x86/kernel/bigsmp_32.c                | 2 +-
 arch/x86/kernel/cpu/addon_cpuid_features.c | 2 +-
 arch/x86/kernel/cpu/amd.c                  | 2 +-
 arch/x86/kernel/cpu/common.c               | 4 ++--
 arch/x86/kernel/cpu/intel.c                | 2 +-
 arch/x86/kernel/cpu/mcheck/mce_amd_64.c    | 2 +-
 arch/x86/kernel/cpu/mcheck/mce_intel_64.c  | 2 +-
 arch/x86/kernel/cpu/mcheck/p4.c            | 2 +-
 arch/x86/kernel/crash.c                    | 2 +-
 arch/x86/kernel/es7000_32.c                | 4 ++--
 arch/x86/kernel/genapic_64.c               | 2 +-
 arch/x86/kernel/genapic_flat_64.c          | 2 +-
 arch/x86/kernel/genx2apic_cluster.c        | 2 +-
 arch/x86/kernel/genx2apic_phys.c           | 2 +-
 arch/x86/kernel/genx2apic_uv_x.c           | 2 +-
 arch/x86/kernel/io_apic.c                  | 2 +-
 arch/x86/kernel/ipi.c                      | 2 +-
 arch/x86/kernel/irq.c                      | 2 +-
 arch/x86/kernel/irq_32.c                   | 2 +-
 arch/x86/kernel/kgdb.c                     | 2 +-
 arch/x86/kernel/mpparse.c                  | 2 +-
 arch/x86/kernel/nmi.c                      | 2 +-
 arch/x86/kernel/numaq_32.c                 | 4 ++--
 arch/x86/kernel/probe_32.c                 | 8 ++++----
 arch/x86/kernel/reboot.c                   | 2 +-
 arch/x86/kernel/setup.c                    | 2 +-
 arch/x86/kernel/smp.c                      | 2 +-
 arch/x86/kernel/smpboot.c                  | 4 ++--
 arch/x86/kernel/summit_32.c                | 2 +-
 arch/x86/kernel/tlb_uv.c                   | 4 ++--
 arch/x86/kernel/uv_irq.c                   | 2 +-
 arch/x86/kernel/visws_quirks.c             | 4 ++--
 arch/x86/kernel/vmi_32.c                   | 2 +-
 arch/x86/kernel/vmiclock_32.c              | 2 +-
 arch/x86/lguest/boot.c                     | 2 +-
 arch/x86/mm/srat_64.c                      | 2 +-
 arch/x86/mm/tlb.c                          | 2 +-
 arch/x86/oprofile/nmi_int.c                | 2 +-
 arch/x86/oprofile/op_model_p4.c            | 2 +-
 arch/x86/oprofile/op_model_ppro.c          | 2 +-
 arch/x86/pci/numaq_32.c                    | 2 +-
 arch/x86/xen/enlighten.c                   | 2 +-
 45 files changed, 54 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index 5f2efc5d992..3395c680a97 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -123,7 +123,7 @@ extern void default_send_IPI_mask_sequence_phys(const struct cpumask *mask,
 						 int vector);
 extern void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
 							 int vector);
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 extern void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
 							 int vector);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 956c1dee6fb..42814152c94 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -37,7 +37,7 @@
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/io.h>
 #include <asm/mpspec.h>
 #include <asm/smp.h>
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index af494bad885..7db03a9b61d 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -36,7 +36,7 @@
 
 #include <asm/arch_hooks.h>
 #include <asm/pgalloc.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/atomic.h>
 #include <asm/mpspec.h>
 #include <asm/i8253.h>
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 9eeb714c5de..72f4e534051 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -6,7 +6,7 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/ipi.h>
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index e48640cfac0..6882a735d9c 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -7,7 +7,7 @@
 #include <asm/pat.h>
 #include <asm/processor.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 struct cpuid_bit {
 	u16 feature;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index ff4d7b9e32e..c94ba9311e6 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -12,7 +12,7 @@
 # include <asm/cacheflush.h>
 #endif
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #include "cpu.h"
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4b5d13e472d..41f3788ec9b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -26,8 +26,8 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
-#include <asm/genapic.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
+#include <asm/apic.h>
 #include <asm/uv/uv.h>
 #endif
 
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 1f137a87d4b..290f92e2b7c 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -24,7 +24,7 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #endif
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index e22d6ed26e6..4772e91e824 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -24,7 +24,7 @@
 #include <linux/smp.h>
 #include <linux/sysdev.h>
 #include <linux/sysfs.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/percpu.h>
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 42f090702f0..5e8c79e748a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -7,7 +7,7 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <asm/processor.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/msr.h>
 #include <asm/mce.h>
 #include <asm/hw_irq.h>
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index f9c92b66dfb..9b60fce09f7 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -11,7 +11,7 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #include <asm/therm_throt.h>
 
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index ad7f2a696f4..3340cc0f244 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -28,7 +28,7 @@
 #include <asm/reboot.h>
 #include <asm/virtext.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 23f1df4ce18..6cdfb3e4dc3 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -40,7 +40,7 @@
 #include <asm/smp.h>
 #include <asm/atomic.h>
 #include <asm/apicdef.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/setup.h>
 
 /*
@@ -387,7 +387,7 @@ void __init es7000_enable_apic_mode(void)
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index ef788635324..91cae6f6e73 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -19,7 +19,7 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/ipi.h>
 #include <asm/setup.h>
 
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 36ee760fd13..a7d84763648 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/hardirq.h>
 #include <asm/smp.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/ipi.h>
 
 #ifdef CONFIG_ACPI
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index dd6e8d68542..f5e02cffa26 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -7,7 +7,7 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/ipi.h>
 
 DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index eb1486bb002..11eb4cb7ca3 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -7,7 +7,7 @@
 #include <linux/dmar.h>
 
 #include <asm/smp.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/ipi.h>
 
 static int x2apic_phys;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 9ae4a92fac8..c1746a198bd 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -22,7 +22,7 @@
 #include <linux/proc_fs.h>
 #include <asm/current.h>
 #include <asm/smp.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/ipi.h>
 #include <asm/pgtable.h>
 #include <asm/uv/uv.h>
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index a89878e08a4..00e6071cefc 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -62,7 +62,7 @@
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_irq.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #define __apicdebuginit(type) static type __init
 
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 1326272cae4..dbf5445727a 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -15,7 +15,7 @@
 #include <asm/mtrr.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/proto.h>
 #include <asm/ipi.h>
 
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3957776b193..f13ca1650aa 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -8,7 +8,7 @@
 #include <linux/smp.h>
 #include <linux/ftrace.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/io_apic.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 4beb9a13873..e4ac7c80e2d 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -212,7 +212,7 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 /* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
 void fixup_irqs(void)
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 5c4f5548384..eedfaebe106 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -46,7 +46,7 @@
 #include <asm/apicdef.h>
 #include <asm/system.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 /*
  * Put the error code here just in case the user cares:
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 20076445319..7f4d2586972 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/smp.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 /*
  * Checksum an MP configuration block.
  */
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 48b9ca5e088..bdfad80c3cf 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -11,7 +11,7 @@
  *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
  */
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #include <linux/nmi.h>
 #include <linux/mm.h>
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index f0f0c2f0596..5a2d75d1fd4 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -31,7 +31,7 @@
 
 #include <asm/processor.h>
 #include <asm/topology.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/numaq.h>
 #include <asm/setup.h>
 #include <asm/e820.h>
@@ -301,7 +301,7 @@ int __init get_memcfg_numaq(void)
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/ipi.h>
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index b3d5d74e522..be0d554984a 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -17,20 +17,20 @@
 #include <asm/fixmap.h>
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/setup.h>
 
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/ipi.h>
 
 #include <linux/smp.h>
@@ -41,7 +41,7 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 32e8f0af292..7c8cd447d5e 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -24,7 +24,7 @@
 # include <asm/iommu.h>
 #endif
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 /*
  * Power off function, if any
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 43d964411c0..deaafd2693e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -97,7 +97,7 @@
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/paravirt.h>
 #include <asm/hypervisor.h>
 
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index eaaffae31cc..13f33ea8cca 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -26,7 +26,7 @@
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 /*
  *	Some notes on x86 processor bugs affecting SMP operation:
  *
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index b5f2b698973..562a9fc3bc3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -60,12 +60,12 @@
 #include <asm/tlbflush.h>
 #include <asm/mtrr.h>
 #include <asm/vmi.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/smpboot_hooks.h>
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 1cf32c325d1..eb31ba276bb 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -40,7 +40,7 @@
 #include <asm/mpspec.h>
 #include <asm/apic.h>
 #include <asm/smp.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/ipi.h>
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index f396e61bcb3..1a7dfa7cb52 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -15,12 +15,12 @@
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
 #include <asm/uv/uv_bau.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/idle.h>
 #include <asm/tsc.h>
 #include <asm/irq_vectors.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 static struct bau_control	**uv_bau_table_bases __read_mostly;
 static int			uv_bau_retry_limit __read_mostly;
diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c
index 75eb5ec5dd2..aeef529917e 100644
--- a/arch/x86/kernel/uv_irq.c
+++ b/arch/x86/kernel/uv_irq.c
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/uv/uv_irq.h>
 
 static void uv_noop(unsigned int irq)
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 4fd646e6dd4..5264fea6c28 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -32,9 +32,9 @@
 #include <asm/e820.h>
 #include <asm/io.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #include <linux/kernel_stat.h>
 
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index a1c7b71dc0d..2cc4a90e2cb 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -32,7 +32,7 @@
 #include <asm/io.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 2a5e0e6a7c0..a4791ef412d 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -30,7 +30,7 @@
 #include <asm/vmi_time.h>
 #include <asm/arch_hooks.h>
 #include <asm/apicdef.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/timer.h>
 #include <asm/i8253.h>
 #include <asm/irq_vectors.h>
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index bc9893f2c38..f3a5305b8ad 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -55,7 +55,7 @@
 #include <linux/lguest_launcher.h>
 #include <linux/virtio_console.h>
 #include <linux/pm.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/lguest.h>
 #include <asm/paravirt.h>
 #include <asm/param.h>
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 15df1baee10..574c8bc95ef 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -20,7 +20,7 @@
 #include <asm/proto.h>
 #include <asm/numa.h>
 #include <asm/e820.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/uv/uv.h>
 
 int acpi_numa __initdata;
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 14c5af4d11e..b641349fe07 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -14,7 +14,7 @@
 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
 			= { &init_mm, 0, };
 
-#include <asm/genapic.h>
+#include <asm/apic.h>
 /*
  *	Smarter SMP flushing macros.
  *		c/o Linus Torvalds.
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index a32a5c7a8ef..202864ad49a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -19,7 +19,7 @@
 #include <linux/cpu.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 #include "op_counter.h"
 #include "op_x86_model.h"
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 09a237bc9ef..4c4a51c90bc 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -14,7 +14,7 @@
 #include <linux/nmi.h>
 #include <asm/msr.h>
 #include <asm/fixmap.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 
 
 #include "op_x86_model.h"
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 5ebd8f605d7..e9f80c744cf 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -16,7 +16,7 @@
 #include <linux/slab.h>
 #include <asm/ptrace.h>
 #include <asm/msr.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/nmi.h>
 #include <asm/intel_arch_perfmon.h>
 
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 5601e829c38..8eb295e116f 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -5,7 +5,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/nodemask.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/mpspec.h>
 #include <asm/pci_x86.h>
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e3dd3fb6729..86497d5f44c 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -36,7 +36,7 @@
 #include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
-#include <asm/genapic.h>
+#include <asm/apic.h>
 #include <asm/page.h>
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
-- 
cgit v1.2.3


From e641f5f525acb163ba71d92de79c9c7366deae03 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 14:02:01 +0100
Subject: x86, apic: remove duplicate asm/apic.h inclusions

Impact: cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/ipi.h     | 2 --
 arch/x86/kernel/acpi/boot.c    | 1 -
 arch/x86/kernel/apic.c         | 1 -
 arch/x86/kernel/cpu/amd.c      | 2 --
 arch/x86/kernel/cpu/common.c   | 6 ++----
 arch/x86/kernel/cpu/intel.c    | 1 -
 arch/x86/kernel/crash.c        | 2 --
 arch/x86/kernel/es7000_32.c    | 1 -
 arch/x86/kernel/irq_32.c       | 1 -
 arch/x86/kernel/numaq_32.c     | 1 -
 arch/x86/kernel/probe_32.c     | 4 ----
 arch/x86/kernel/reboot.c       | 2 --
 arch/x86/kernel/setup.c        | 1 -
 arch/x86/kernel/smpboot.c      | 1 -
 arch/x86/kernel/summit_32.c    | 1 -
 arch/x86/kernel/tlb_uv.c       | 2 --
 arch/x86/kernel/visws_quirks.c | 7 +------
 arch/x86/mm/tlb.c              | 1 -
 18 files changed, 3 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index 3395c680a97..0b7228268a6 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -123,8 +123,6 @@ extern void default_send_IPI_mask_sequence_phys(const struct cpumask *mask,
 						 int vector);
 extern void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
 							 int vector);
-#include <asm/apic.h>
-
 extern void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
 							 int vector);
 extern void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 42814152c94..a18eb7ce223 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -37,7 +37,6 @@
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
-#include <asm/apic.h>
 #include <asm/io.h>
 #include <asm/mpspec.h>
 #include <asm/smp.h>
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 7db03a9b61d..c12823eb55b 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -36,7 +36,6 @@
 
 #include <asm/arch_hooks.h>
 #include <asm/pgalloc.h>
-#include <asm/apic.h>
 #include <asm/atomic.h>
 #include <asm/mpspec.h>
 #include <asm/i8253.h>
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index c94ba9311e6..25423a5b80e 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -12,8 +12,6 @@
 # include <asm/cacheflush.h>
 #endif
 
-#include <asm/apic.h>
-
 #include "cpu.h"
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 41f3788ec9b..826d5c87627 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -23,11 +23,9 @@
 #include <asm/smp.h>
 #include <asm/cpu.h>
 #include <asm/cpumask.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <asm/apic.h>
 #include <asm/apic.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
 #endif
 
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 290f92e2b7c..7aeef1d327b 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -24,7 +24,6 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
-#include <asm/apic.h>
 #endif
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 3340cc0f244..ff958248e61 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -28,8 +28,6 @@
 #include <asm/reboot.h>
 #include <asm/virtext.h>
 
-#include <asm/apic.h>
-
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
 
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 6cdfb3e4dc3..352d870e5d5 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -387,7 +387,6 @@ void __init es7000_enable_apic_mode(void)
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index e4ac7c80e2d..9dc6b2b2427 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -212,7 +212,6 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-#include <asm/apic.h>
 
 /* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
 void fixup_irqs(void)
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 5a2d75d1fd4..40400a58845 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -301,7 +301,6 @@ int __init get_memcfg_numaq(void)
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/ipi.h>
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index be0d554984a..fd1352ac909 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -23,14 +23,12 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/smp.h>
 #include <linux/init.h>
-#include <asm/apic.h>
 #include <asm/ipi.h>
 
 #include <linux/smp.h>
@@ -41,8 +39,6 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-#include <asm/apic.h>
-
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 7c8cd447d5e..1cc18d439bb 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -24,8 +24,6 @@
 # include <asm/iommu.h>
 #endif
 
-#include <asm/apic.h>
-
 /*
  * Power off function, if any
  */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index deaafd2693e..b2da0b1d15e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -97,7 +97,6 @@
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 
-#include <asm/apic.h>
 #include <asm/paravirt.h>
 #include <asm/hypervisor.h>
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 562a9fc3bc3..09e73876a44 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -65,7 +65,6 @@
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
-#include <asm/apic.h>
 #include <asm/smpboot_hooks.h>
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index eb31ba276bb..577b0bd8e53 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -40,7 +40,6 @@
 #include <asm/mpspec.h>
 #include <asm/apic.h>
 #include <asm/smp.h>
-#include <asm/apic.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/ipi.h>
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 1a7dfa7cb52..f04549afcfe 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -20,8 +20,6 @@
 #include <asm/tsc.h>
 #include <asm/irq_vectors.h>
 
-#include <asm/apic.h>
-
 static struct bau_control	**uv_bau_table_bases __read_mostly;
 static int			uv_bau_retry_limit __read_mostly;
 
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 5264fea6c28..34199d30ff4 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -29,13 +29,10 @@
 #include <asm/fixmap.h>
 #include <asm/reboot.h>
 #include <asm/setup.h>
+#include <asm/apic.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 
-#include <asm/apic.h>
-
-#include <asm/apic.h>
-
 #include <linux/kernel_stat.h>
 
 #include <asm/i8259.h>
@@ -49,8 +46,6 @@
 
 extern int no_broadcast;
 
-#include <asm/apic.h>
-
 char visws_board_type	= -1;
 char visws_board_rev	= -1;
 
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index b641349fe07..a654d59e448 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -14,7 +14,6 @@
 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
 			= { &init_mm, 0, };
 
-#include <asm/apic.h>
 /*
  *	Smarter SMP flushing macros.
  *		c/o Linus Torvalds.
-- 
cgit v1.2.3


From 5c615feb90ce63f2293a7ac7809f320f46c75e0a Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 14:04:24 +0100
Subject: x86, apic: remove stale references to APIC_DEFINITION

Impact: cleanup

APIC_DEFINITION was a hack from the x86 subarch times, it has no
meaning anymore - remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/bigsmp_32.c | 1 -
 arch/x86/kernel/es7000_32.c | 1 -
 arch/x86/kernel/numaq_32.c  | 1 -
 arch/x86/kernel/summit_32.c | 1 -
 4 files changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 72f4e534051..f49af36351f 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -2,7 +2,6 @@
  * APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
  * Drives the local APIC in "clustered mode".
  */
-#define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 352d870e5d5..cf53a98dbf1 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -383,7 +383,6 @@ void __init es7000_enable_apic_mode(void)
 /*
  * APIC driver for the Unisys ES7000 chipset.
  */
-#define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 40400a58845..dcf22f50827 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -297,7 +297,6 @@ int __init get_memcfg_numaq(void)
 /*
  * APIC driver for the IBM NUMAQ chipset.
  */
-#define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 577b0bd8e53..30597778914 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -34,7 +34,6 @@
 /*
  * APIC driver for the IBM "Summit" chipset.
  */
-#define APIC_DEFINITION 1
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <asm/mpspec.h>
-- 
cgit v1.2.3


From 77313190d121dd1fffa965aff6e9f0782a307bb8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 14:09:20 +0100
Subject: x86, apic: clean up arch/x86/kernel/bigsmp_32.c

Impact: cleanup

- remove unnecessary indirections that were artifacts of the subarch code
- clean up include file section
- clean up various small details

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/bigsmp_32.c | 43 ++++++++++++++++++++++++-------------------
 1 file changed, 24 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index f49af36351f..41732abd700 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -1,27 +1,26 @@
 /*
- * APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
+ * APIC driver for "bigsmp" xAPIC machines with more than 8 virtual CPUs.
+ *
  * Drives the local APIC in "clustered mode".
  */
 #include <linux/threads.h>
 #include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/ipi.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
 #include <linux/smp.h>
 
+#include <asm/apicdef.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
 
 static inline unsigned bigsmp_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0xFF;
 }
 
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-
 static inline int bigsmp_apic_id_registered(void)
 {
 	return 1;
@@ -36,8 +35,6 @@ static inline const cpumask_t *bigsmp_target_cpus(void)
 #endif
 }
 
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-
 static inline unsigned long
 bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
@@ -52,9 +49,11 @@ static inline unsigned long bigsmp_check_apicid_present(int bit)
 static inline unsigned long calculate_ldr(int cpu)
 {
 	unsigned long val, id;
+
 	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = xapic_phys_to_log_apicid(cpu);
+	id = per_cpu(x86_bios_cpu_apicid, cpu);
 	val |= SET_APIC_LOGICAL_ID(id);
+
 	return val;
 }
 
@@ -70,15 +69,16 @@ static inline void bigsmp_init_apic_ldr(void)
 	unsigned long val;
 	int cpu = smp_processor_id();
 
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	apic_write(APIC_DFR, APIC_DFR_FLAT);
 	val = calculate_ldr(cpu);
 	apic_write(APIC_LDR, val);
 }
 
 static inline void bigsmp_setup_apic_routing(void)
 {
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"Physflat", nr_ioapics);
+	printk(KERN_INFO
+		"Enabling APIC mode:  Physflat.  Using %d I/O APICs\n",
+		nr_ioapics);
 }
 
 static inline int bigsmp_apicid_to_node(int logical_apicid)
@@ -100,6 +100,7 @@ static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
 }
 
 extern u8 cpu_2_logical_apicid[];
+
 /* Mapping from cpu number to logical apicid */
 static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 {
@@ -175,21 +176,24 @@ static int hp_ht_bigsmp(const struct dmi_system_id *d)
 {
 	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
 	dmi_bigsmp = 1;
+
 	return 0;
 }
 
 
 static const struct dmi_system_id bigsmp_dmi_table[] = {
 	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
-	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-	DMI_MATCH(DMI_BIOS_VERSION, "P44-"),}
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+			DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
+		}
 	},
 
 	{ hp_ht_bigsmp, "HP ProLiant DL740",
-	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-	DMI_MATCH(DMI_BIOS_VERSION, "P47-"),}
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+			DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+		}
 	},
-	 { }
+	{ } /* NULL entry stops DMI scanning */
 };
 
 static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
@@ -204,6 +208,7 @@ static int probe_bigsmp(void)
 		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
+
 	return dmi_bigsmp;
 }
 
-- 
cgit v1.2.3


From 2f205bc47f615b7bd0c7aba817d67ce25760eaf1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 14:45:30 +0100
Subject: x86, apic: clean up the cpu_2_logical_apiciddeclaration

extern declarations were scattered in 4 files - consolidate them
into apic.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h | 4 ++++
 arch/x86/kernel/bigsmp_32.c | 2 --
 arch/x86/kernel/es7000_32.c | 3 +--
 arch/x86/kernel/numaq_32.c  | 5 +----
 arch/x86/kernel/summit_32.c | 4 +---
 5 files changed, 7 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index c07f5fbf43c..2cdd19e4536 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -541,4 +541,8 @@ static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
 
 #endif /* CONFIG_X86_LOCAL_APIC */
 
+#ifdef CONFIG_X86_32
+extern u8 cpu_2_logical_apicid[NR_CPUS];
+#endif
+
 #endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 41732abd700..0de9eed7c60 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -99,8 +99,6 @@ static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
 	return physid_mask_of_physid(phys_apicid);
 }
 
-extern u8 cpu_2_logical_apicid[];
-
 /* Mapping from cpu number to logical apicid */
 static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 {
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index cf53a98dbf1..3dc48831eb9 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -403,7 +403,6 @@ void __init es7000_enable_apic_mode(void)
 
 extern void es7000_enable_apic_mode(void);
 extern int apic_version [MAX_APICS];
-extern u8 cpu_2_logical_apicid[];
 extern unsigned int boot_cpu_physical_apicid;
 
 extern int parse_unisys_oem (char *oemptr);
@@ -570,7 +569,7 @@ static int es7000_cpu_to_logical_apicid(int cpu)
 #ifdef CONFIG_SMP
 	if (cpu >= nr_cpu_ids)
 		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
+	return cpu_2_logical_apicid[cpu];
 #else
 	return logical_smp_processor_id();
 #endif
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index dcf22f50827..9abaacde72e 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -408,14 +408,11 @@ static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
 	return physids_promote(0xFUL);
 }
 
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-
 static inline int numaq_cpu_to_logical_apicid(int cpu)
 {
 	if (cpu >= nr_cpu_ids)
 		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
+	return cpu_2_logical_apicid[cpu];
 }
 
 /*
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 30597778914..7a1db1f2356 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -209,8 +209,6 @@ static inline unsigned long summit_check_apicid_present(int bit)
 
 #define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
 
-extern u8 cpu_2_logical_apicid[];
-
 static inline void summit_init_apic_ldr(void)
 {
 	unsigned long val, id;
@@ -264,7 +262,7 @@ static inline int summit_cpu_to_logical_apicid(int cpu)
 #ifdef CONFIG_SMP
 	if (cpu >= nr_cpu_ids)
 		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
+	return cpu_2_logical_apicid[cpu];
 #else
 	return logical_smp_processor_id();
 #endif
-- 
cgit v1.2.3


From 2c4ce18c95d632c9227ebcc6d45da11a9ef1ec70 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 14:57:16 +0100
Subject: x86, es7000: clean up

No code changed:

arch/x86/kernel/es7000_32.o:

   text	   data	    bss	    dec	    hex	filename
   2813	    192	     44	   3049	    be9	es7000_32.o.before
   2813	    192	     44	   3049	    be9	es7000_32.o.after

md5:
   a593d98a882bf534622c70d9568497ac  es7000_32.o.before.asm
   a593d98a882bf534622c70d9568497ac  es7000_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c | 241 +++++++++++++++++++++-----------------------
 1 file changed, 113 insertions(+), 128 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 3dc48831eb9..c7cc9776cca 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -24,90 +24,96 @@
  * http://www.unisys.com
  */
 
-#include <linux/module.h>
-#include <linux/types.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+#include <linux/threads.h>
 #include <linux/kernel.h>
-#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
 #include <linux/string.h>
-#include <linux/spinlock.h>
+#include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
 #include <linux/acpi.h>
-#include <asm/io.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/atomic.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
 #include <asm/apicdef.h>
-#include <asm/apic.h>
+#include <asm/atomic.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
 #include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/io.h>
 
 /*
  * ES7000 chipsets
  */
 
-#define NON_UNISYS		0
-#define ES7000_CLASSIC		1
-#define ES7000_ZORRO		2
+#define NON_UNISYS			0
+#define ES7000_CLASSIC			1
+#define ES7000_ZORRO			2
 
+#define	MIP_REG				1
+#define	MIP_PSAI_REG			4
 
-#define	MIP_REG			1
-#define	MIP_PSAI_REG		4
+#define	MIP_BUSY			1
+#define	MIP_SPIN			0xf0000
+#define	MIP_VALID			0x0100000000000000ULL
 
-#define	MIP_BUSY		1
-#define	MIP_SPIN		0xf0000
-#define	MIP_VALID		0x0100000000000000ULL
-#define	MIP_PORT(VALUE)	((VALUE >> 32) & 0xffff)
+#define	MIP_PORT(val)			((val >> 32) & 0xffff)
 
-#define	MIP_RD_LO(VALUE)	(VALUE & 0xffffffff)
+#define	MIP_RD_LO(val)			(val & 0xffffffff)
 
 struct mip_reg_info {
-	unsigned long long mip_info;
-	unsigned long long delivery_info;
-	unsigned long long host_reg;
-	unsigned long long mip_reg;
+	unsigned long long		mip_info;
+	unsigned long long		delivery_info;
+	unsigned long long		host_reg;
+	unsigned long long		mip_reg;
 };
 
 struct part_info {
-	unsigned char type;
-	unsigned char length;
-	unsigned char part_id;
-	unsigned char apic_mode;
-	unsigned long snum;
-	char ptype[16];
-	char sname[64];
-	char pname[64];
+	unsigned char			type;
+	unsigned char			length;
+	unsigned char			part_id;
+	unsigned char			apic_mode;
+	unsigned long			snum;
+	char				ptype[16];
+	char				sname[64];
+	char				pname[64];
 };
 
 struct psai {
-	unsigned long long entry_type;
-	unsigned long long addr;
-	unsigned long long bep_addr;
+	unsigned long long		entry_type;
+	unsigned long long		addr;
+	unsigned long long		bep_addr;
 };
 
 struct es7000_mem_info {
-	unsigned char type;
-	unsigned char length;
-	unsigned char resv[6];
-	unsigned long long  start;
-	unsigned long long  size;
+	unsigned char			type;
+	unsigned char			length;
+	unsigned char			resv[6];
+	unsigned long long		start;
+	unsigned long long		size;
 };
 
 struct es7000_oem_table {
-	unsigned long long hdr;
-	struct mip_reg_info mip;
-	struct part_info pif;
-	struct es7000_mem_info shm;
-	struct psai psai;
+	unsigned long long		hdr;
+	struct mip_reg_info		mip;
+	struct part_info		pif;
+	struct es7000_mem_info		shm;
+	struct psai			psai;
 };
 
 #ifdef CONFIG_ACPI
 
 struct oem_table {
-	struct acpi_table_header Header;
-	u32 OEMTableAddr;
-	u32 OEMTableSize;
+	struct acpi_table_header	Header;
+	u32				OEMTableAddr;
+	u32				OEMTableSize;
 };
 
 extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
@@ -115,36 +121,50 @@ extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
 #endif
 
 struct mip_reg {
-	unsigned long long off_0;
-	unsigned long long off_8;
-	unsigned long long off_10;
-	unsigned long long off_18;
-	unsigned long long off_20;
-	unsigned long long off_28;
-	unsigned long long off_30;
-	unsigned long long off_38;
+	unsigned long long		off_0x00;
+	unsigned long long		off_0x08;
+	unsigned long long		off_0x10;
+	unsigned long long		off_0x18;
+	unsigned long long		off_0x20;
+	unsigned long long		off_0x28;
+	unsigned long long		off_0x30;
+	unsigned long long		off_0x38;
 };
 
-#define	MIP_SW_APIC		0x1020b
-#define	MIP_FUNC(VALUE)		(VALUE & 0xff)
+#define	MIP_SW_APIC			0x1020b
+#define	MIP_FUNC(VALUE)			(VALUE & 0xff)
+
+#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
+#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
+
+#define APIC_DFR_VALUE			(APIC_DFR_FLAT)
+
+extern void es7000_enable_apic_mode(void);
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
+extern void setup_unisys(void);
+
+#define apicid_cluster(apicid)		(apicid & 0xF0)
 
 /*
  * ES7000 Globals
  */
 
-static volatile unsigned long	*psai = NULL;
-static struct mip_reg		*mip_reg;
-static struct mip_reg		*host_reg;
-static int 			mip_port;
-static unsigned long		mip_addr, host_addr;
+static volatile unsigned long		*psai = NULL;
+static struct mip_reg			*mip_reg;
+static struct mip_reg			*host_reg;
+static int 				mip_port;
+static unsigned long			mip_addr, host_addr;
 
-int es7000_plat;
+int					es7000_plat;
 
 /*
  * GSI override for ES7000 platforms.
  */
 
-static unsigned int base;
+static unsigned int			base;
 
 static int
 es7000_rename_gsi(int ioapic, int gsi)
@@ -160,6 +180,7 @@ es7000_rename_gsi(int ioapic, int gsi)
 
 	if (!ioapic && (gsi < 16))
 		gsi += base;
+
 	return gsi;
 }
 
@@ -196,8 +217,7 @@ static int __init es7000_update_genapic(void)
 	return 0;
 }
 
-void __init
-setup_unisys(void)
+void __init setup_unisys(void)
 {
 	/*
 	 * Determine the generation of the ES7000 currently running.
@@ -219,8 +239,7 @@ setup_unisys(void)
  * Parse the OEM Table
  */
 
-int __init
-parse_unisys_oem (char *oemptr)
+int __init parse_unisys_oem (char *oemptr)
 {
 	int                     i;
 	int 			success = 0;
@@ -277,12 +296,15 @@ parse_unisys_oem (char *oemptr)
 		es7000_plat = NON_UNISYS;
 	} else
 		setup_unisys();
+
 	return es7000_plat;
 }
 
 #ifdef CONFIG_ACPI
-static unsigned long oem_addrX;
-static unsigned long oem_size;
+
+static unsigned long			oem_addrX;
+static unsigned long			oem_size;
+
 int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
@@ -315,8 +337,7 @@ void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 }
 #endif
 
-static void
-es7000_spin(int n)
+static void es7000_spin(int n)
 {
 	int i = 0;
 
@@ -327,16 +348,15 @@ es7000_spin(int n)
 static int __init
 es7000_mip_write(struct mip_reg *mip_reg)
 {
-	int			status = 0;
-	int			spin;
+	int status = 0;
+	int spin;
 
 	spin = MIP_SPIN;
-	while (((unsigned long long)host_reg->off_38 &
-		(unsigned long long)MIP_VALID) != 0) {
-			if (--spin <= 0) {
-				printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
-				return -1;
-			}
+	while ((host_reg->off_0x38 & MIP_VALID) != 0) {
+		if (--spin <= 0) {
+			printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+			return -1;
+		}
 		es7000_spin(MIP_SPIN);
 	}
 
@@ -345,8 +365,7 @@ es7000_mip_write(struct mip_reg *mip_reg)
 
 	spin = MIP_SPIN;
 
-	while (((unsigned long long)mip_reg->off_38 &
-		(unsigned long long)MIP_VALID) == 0) {
+	while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
 		if (--spin <= 0) {
 			printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
 			return -1;
@@ -354,10 +373,9 @@ es7000_mip_write(struct mip_reg *mip_reg)
 		es7000_spin(MIP_SPIN);
 	}
 
-	status = ((unsigned long long)mip_reg->off_0 &
-		(unsigned long long)0xffff0000000000ULL) >> 48;
-	mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
-		(unsigned long long)~MIP_VALID);
+	status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48;
+	mip_reg->off_0x38 &= ~MIP_VALID;
+
 	return status;
 }
 
@@ -371,8 +389,8 @@ void __init es7000_enable_apic_mode(void)
 
 	printk("ES7000: Enabling APIC mode.\n");
        	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-       	es7000_mip_reg.off_0 = MIP_SW_APIC;
-       	es7000_mip_reg.off_38 = MIP_VALID;
+       	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
+       	es7000_mip_reg.off_0x38 = MIP_VALID;
 
        	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) {
 		printk("es7000_enable_apic_mode: command failed, status = %x\n",
@@ -380,39 +398,6 @@ void __init es7000_enable_apic_mode(void)
 	}
 }
 
-/*
- * APIC driver for the Unisys ES7000 chipset.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/smp.h>
-#include <asm/ipi.h>
-
-#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
-#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
-
-#define APIC_DFR_VALUE			(APIC_DFR_FLAT)
-
-extern void es7000_enable_apic_mode(void);
-extern int apic_version [MAX_APICS];
-extern unsigned int boot_cpu_physical_apicid;
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
-extern void setup_unisys(void);
-
-#define apicid_cluster(apicid)		(apicid & 0xF0)
-#define xapic_phys_to_log_apicid(cpu)	per_cpu(x86_bios_cpu_apicid, cpu)
-
 static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
 {
 	/* Careful. Some cpus do not strictly honor the set of cpus
@@ -495,9 +480,9 @@ static unsigned long es7000_check_apicid_present(int bit)
 
 static unsigned long calculate_ldr(int cpu)
 {
-	unsigned long id = xapic_phys_to_log_apicid(cpu);
+	unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu);
 
-	return (SET_APIC_LOGICAL_ID(id));
+	return SET_APIC_LOGICAL_ID(id);
 }
 
 /*
@@ -547,7 +532,7 @@ static int es7000_cpu_present_to_apicid(int mps_cpu)
 	if (!mps_cpu)
 		return boot_cpu_physical_apicid;
 	else if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+		return per_cpu(x86_bios_cpu_apicid, mps_cpu);
 	else
 		return BAD_APICID;
 }
@@ -584,7 +569,7 @@ static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
 static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
 {
 	boot_cpu_physical_apicid = read_apic_id();
-	return (1);
+	return 1;
 }
 
 static unsigned int
-- 
cgit v1.2.3


From b9e0d1aa9767707cad24db32d8ce0409df16d491 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 15:09:08 +0100
Subject: x86, apic: remove apicid_cluster()

There were multiple definitions of apicid_cluster() scattered around
in APIC drivers - but the definitions are equivalent to the already
existing generic APIC_CLUSTER() method.

So remove apicid_cluster() and change all users to APIC_CLUSTER().

No code changed:

md5:
   1b8244ba8d3d6a454593ce10f09dfa58  summit_32.o.before.asm
   1b8244ba8d3d6a454593ce10f09dfa58  summit_32.o.after.asm

md5:
   a593d98a882bf534622c70d9568497ac  es7000_32.o.before.asm
   a593d98a882bf534622c70d9568497ac  es7000_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c | 8 ++------
 arch/x86/kernel/numaq_32.c  | 2 --
 arch/x86/kernel/summit_32.c | 9 +++------
 3 files changed, 5 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index c7cc9776cca..8a20866b2a3 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -146,8 +146,6 @@ extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
 extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
 extern void setup_unisys(void);
 
-#define apicid_cluster(apicid)		(apicid & 0xF0)
-
 /*
  * ES7000 Globals
  */
@@ -595,8 +593,7 @@ es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 		if (cpumask_test_cpu(cpu, cpumask)) {
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 				printk ("%s: Not a valid mask!\n", __func__);
 
 				return 0xFF;
@@ -630,8 +627,7 @@ static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
 		if (cpu_isset(cpu, *cpumask)) {
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 				printk ("%s: Not a valid mask!\n", __func__);
 
 				return es7000_cpu_to_logical_apicid(0);
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 9abaacde72e..15328500de6 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -375,8 +375,6 @@ static inline unsigned long numaq_check_apicid_present(int bit)
 	return physid_isset(bit, phys_cpu_present_map);
 }
 
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
 static inline int numaq_apic_id_registered(void)
 {
 	return 1;
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 7a1db1f2356..c4690349a54 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -207,14 +207,12 @@ static inline unsigned long summit_check_apicid_present(int bit)
 	return 1;
 }
 
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
 static inline void summit_init_apic_ldr(void)
 {
 	unsigned long val, id;
 	int count = 0;
 	u8 my_id = (u8)hard_smp_processor_id();
-	u8 my_cluster = (u8)apicid_cluster(my_id);
+	u8 my_cluster = APIC_CLUSTER(my_id);
 #ifdef CONFIG_SMP
 	u8 lid;
 	int i;
@@ -222,7 +220,7 @@ static inline void summit_init_apic_ldr(void)
 	/* Create logical APIC IDs by counting CPUs already in cluster. */
 	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
 		lid = cpu_2_logical_apicid[i];
-		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+		if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
 			++count;
 	}
 #endif
@@ -319,8 +317,7 @@ static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 		if (cpu_isset(cpu, *cpumask)) {
 			int new_apicid = summit_cpu_to_logical_apicid(cpu);
 
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)) {
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 				printk ("%s: Not a valid mask!\n", __func__);
 
 				return 0xFF;
-- 
cgit v1.2.3


From d3185b37df05e9ad7ce987a9a0419ffe1af9d23f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 15:13:05 +0100
Subject: x86, es7000: remove externs

Impact: cleanup

In the subarch times there were a number of externs between
various bits of the ES7000 code. Now that there's a single
es7000-platform support file, the externs can be removed and
the functions can be changed the statics.

Beyond the cleanup factor, this also shrinks the size of the
kernel image a bit:

arch/x86/kernel/es7000_32.o:

   text	   data	    bss	    dec	    hex	filename
   2813	    192	     44	   3049	    be9	es7000_32.o.before
   2693	    192	     44	   2929	    b71	es7000_32.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 8a20866b2a3..d5c3894a983 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -116,8 +116,6 @@ struct oem_table {
 	u32				OEMTableSize;
 };
 
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
 #endif
 
 struct mip_reg {
@@ -140,12 +138,6 @@ struct mip_reg {
 
 #define APIC_DFR_VALUE			(APIC_DFR_FLAT)
 
-extern void es7000_enable_apic_mode(void);
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void unmap_unisys_acpi_oem_table(unsigned long oem_addr);
-extern void setup_unisys(void);
-
 /*
  * ES7000 Globals
  */
@@ -215,7 +207,7 @@ static int __init es7000_update_genapic(void)
 	return 0;
 }
 
-void __init setup_unisys(void)
+static void __init setup_unisys(void)
 {
 	/*
 	 * Determine the generation of the ES7000 currently running.
@@ -234,10 +226,9 @@ void __init setup_unisys(void)
 }
 
 /*
- * Parse the OEM Table
+ * Parse the OEM Table:
  */
-
-int __init parse_unisys_oem (char *oemptr)
+static int __init parse_unisys_oem (char *oemptr)
 {
 	int                     i;
 	int 			success = 0;
@@ -290,9 +281,9 @@ int __init parse_unisys_oem (char *oemptr)
 		tp += size;
 	}
 
-	if (success < 2) {
+	if (success < 2)
 		es7000_plat = NON_UNISYS;
-	} else
+	else
 		setup_unisys();
 
 	return es7000_plat;
@@ -303,7 +294,7 @@ int __init parse_unisys_oem (char *oemptr)
 static unsigned long			oem_addrX;
 static unsigned long			oem_size;
 
-int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
 	int i = 0;
@@ -326,7 +317,7 @@ int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 	return -1;
 }
 
-void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 {
 	if (!oem_addr)
 		return;
@@ -377,7 +368,7 @@ es7000_mip_write(struct mip_reg *mip_reg)
 	return status;
 }
 
-void __init es7000_enable_apic_mode(void)
+static void __init es7000_enable_apic_mode(void)
 {
 	struct mip_reg es7000_mip_reg;
 	int mip_status;
@@ -706,9 +697,9 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	check_dsdt = es7000_check_dsdt();
 
 	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (check_dsdt)
+		if (check_dsdt) {
 			ret = parse_unisys_oem((char *)oem_addr);
-		else {
+		} else {
 			setup_unisys();
 			ret = 1;
 		}
-- 
cgit v1.2.3


From 352887d1c9d99d4c2f0fbac6176ef0cd4fe7a820 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 15:17:55 +0100
Subject: x86, es7000: remove dead code, clean up

Impact: cleanup

 - a number of structure definitions were stale
 - remove needless wrappers around apic definitions
 - fix details noticed by checkpatch

No code changed:

md5:
   029d8fde0aaf6e934ea63bd8b36430fd  es7000_32.o.before.asm
   029d8fde0aaf6e934ea63bd8b36430fd  es7000_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c | 103 ++++++++++++++------------------------------
 1 file changed, 33 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index d5c3894a983..03acbe95d2b 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -23,7 +23,6 @@
  *
  * http://www.unisys.com
  */
-
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
 #include <linux/cpumask.h>
@@ -63,11 +62,23 @@
 #define	MIP_BUSY			1
 #define	MIP_SPIN			0xf0000
 #define	MIP_VALID			0x0100000000000000ULL
+#define	MIP_SW_APIC			0x1020b
 
 #define	MIP_PORT(val)			((val >> 32) & 0xffff)
 
 #define	MIP_RD_LO(val)			(val & 0xffffffff)
 
+struct mip_reg {
+	unsigned long long		off_0x00;
+	unsigned long long		off_0x08;
+	unsigned long long		off_0x10;
+	unsigned long long		off_0x18;
+	unsigned long long		off_0x20;
+	unsigned long long		off_0x28;
+	unsigned long long		off_0x30;
+	unsigned long long		off_0x38;
+};
+
 struct mip_reg_info {
 	unsigned long long		mip_info;
 	unsigned long long		delivery_info;
@@ -75,69 +86,20 @@ struct mip_reg_info {
 	unsigned long long		mip_reg;
 };
 
-struct part_info {
-	unsigned char			type;
-	unsigned char			length;
-	unsigned char			part_id;
-	unsigned char			apic_mode;
-	unsigned long			snum;
-	char				ptype[16];
-	char				sname[64];
-	char				pname[64];
-};
-
 struct psai {
 	unsigned long long		entry_type;
 	unsigned long long		addr;
 	unsigned long long		bep_addr;
 };
 
-struct es7000_mem_info {
-	unsigned char			type;
-	unsigned char			length;
-	unsigned char			resv[6];
-	unsigned long long		start;
-	unsigned long long		size;
-};
-
-struct es7000_oem_table {
-	unsigned long long		hdr;
-	struct mip_reg_info		mip;
-	struct part_info		pif;
-	struct es7000_mem_info		shm;
-	struct psai			psai;
-};
-
 #ifdef CONFIG_ACPI
-
-struct oem_table {
+struct es7000_oem_table {
 	struct acpi_table_header	Header;
 	u32				OEMTableAddr;
 	u32				OEMTableSize;
 };
-
 #endif
 
-struct mip_reg {
-	unsigned long long		off_0x00;
-	unsigned long long		off_0x08;
-	unsigned long long		off_0x10;
-	unsigned long long		off_0x18;
-	unsigned long long		off_0x20;
-	unsigned long long		off_0x28;
-	unsigned long long		off_0x30;
-	unsigned long long		off_0x38;
-};
-
-#define	MIP_SW_APIC			0x1020b
-#define	MIP_FUNC(VALUE)			(VALUE & 0xff)
-
-#define APIC_DFR_VALUE_CLUSTER		(APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE_CLUSTER	(dest_LowestPrio)
-#define INT_DEST_MODE_CLUSTER		(1) /* logical delivery broadcast to all procs */
-
-#define APIC_DFR_VALUE			(APIC_DFR_FLAT)
-
 /*
  * ES7000 Globals
  */
@@ -228,14 +190,14 @@ static void __init setup_unisys(void)
 /*
  * Parse the OEM Table:
  */
-static int __init parse_unisys_oem (char *oemptr)
+static int __init parse_unisys_oem(char *oemptr)
 {
-	int                     i;
+	int			i;
 	int 			success = 0;
-	unsigned char           type, size;
-	unsigned long           val;
-	char                    *tp = NULL;
-	struct psai             *psaip = NULL;
+	unsigned char		type, size;
+	unsigned long		val;
+	char			*tp = NULL;
+	struct psai		*psaip = NULL;
 	struct mip_reg_info 	*mi;
 	struct mip_reg		*host, *mip;
 
@@ -243,7 +205,7 @@ static int __init parse_unisys_oem (char *oemptr)
 
 	tp += 8;
 
-	for (i=0; i <= 6; i++) {
+	for (i = 0; i <= 6; i++) {
 		type = *tp++;
 		size = *tp++;
 		tp -= 2;
@@ -302,7 +264,7 @@ static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 
 	while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) {
 		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
-			struct oem_table *t = (struct oem_table *)header;
+			struct es7000_oem_table *t = (void *)header;
 
 			oem_addrX = t->OEMTableAddr;
 			oem_size = t->OEMTableSize;
@@ -377,11 +339,11 @@ static void __init es7000_enable_apic_mode(void)
 		return;
 
 	printk("ES7000: Enabling APIC mode.\n");
-       	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-       	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
-       	es7000_mip_reg.off_0x38 = MIP_VALID;
+	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
+	es7000_mip_reg.off_0x38 = MIP_VALID;
 
-       	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) {
+	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) {
 		printk("es7000_enable_apic_mode: command failed, status = %x\n",
 			mip_status);
 	}
@@ -444,7 +406,7 @@ static void es7000_send_IPI_all(int vector)
 
 static int es7000_apic_id_registered(void)
 {
-	        return 1;
+	return 1;
 }
 
 static const cpumask_t *target_cpus_cluster(void)
@@ -486,7 +448,7 @@ static void es7000_init_apic_ldr_cluster(void)
 	unsigned long val;
 	int cpu = smp_processor_id();
 
-	apic_write(APIC_DFR, APIC_DFR_VALUE_CLUSTER);
+	apic_write(APIC_DFR, APIC_DFR_CLUSTER);
 	val = calculate_ldr(cpu);
 	apic_write(APIC_LDR, val);
 }
@@ -496,7 +458,7 @@ static void es7000_init_apic_ldr(void)
 	unsigned long val;
 	int cpu = smp_processor_id();
 
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	apic_write(APIC_DFR, APIC_DFR_FLAT);
 	val = calculate_ldr(cpu);
 	apic_write(APIC_LDR, val);
 }
@@ -585,7 +547,7 @@ es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 
 			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
+				printk("%s: Not a valid mask!\n", __func__);
 
 				return 0xFF;
 			}
@@ -619,7 +581,7 @@ static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 
 			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
+				printk("%s: Not a valid mask!\n", __func__);
 
 				return es7000_cpu_to_logical_apicid(0);
 			}
@@ -658,8 +620,9 @@ static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
 void __init es7000_update_genapic_to_cluster(void)
 {
 	apic->target_cpus = target_cpus_cluster;
-	apic->irq_delivery_mode = INT_DELIVERY_MODE_CLUSTER;
-	apic->irq_dest_mode = INT_DEST_MODE_CLUSTER;
+	apic->irq_delivery_mode = dest_LowestPrio;
+	/* logical delivery broadcast to all procs: */
+	apic->irq_dest_mode = 1;
 
 	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
 
-- 
cgit v1.2.3


From 7da18ed924b182f8174de243c55a323c56398675 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 15:29:30 +0100
Subject: x86, es7000: misc cleanups

These are cleanups that change the md5 signature:

 - asm/ => linux/ include conversion
 - simplify the code flow of find_unisys_acpi_oem_table()
 - move ACPI methods into one #ifdef block
 - remove 0/NULL initialization of statics
 - simplify/standardize printouts
 - update copyrights
 - more cleanups, pointed out by checkpatch

arch/x86/kernel/es7000_32.o:

   text	   data	    bss	    dec	    hex	filename
   2693	    192	     44	   2929	    b71	es7000_32.o.before
   2688	    192	     44	   2924	    b6c	es7000_32.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/es7000_32.c | 170 +++++++++++++++++++++++---------------------
 1 file changed, 90 insertions(+), 80 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 03acbe95d2b..3519f8cab70 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -1,10 +1,14 @@
 /*
  * Written by: Garry Forsgren, Unisys Corporation
  *             Natalie Protasevich, Unisys Corporation
+ *
  * This file contains the code to configure and interface
  * with Unisys ES7000 series hardware system manager.
  *
- * Copyright (c) 2003 Unisys Corporation.  All Rights Reserved.
+ * Copyright (c) 2003 Unisys Corporation.
+ * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
+ *
+ *   All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
@@ -35,7 +39,9 @@
 #include <linux/errno.h>
 #include <linux/acpi.h>
 #include <linux/init.h>
+#include <linux/nmi.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
@@ -44,9 +50,6 @@
 #include <asm/setup.h>
 #include <asm/apic.h>
 #include <asm/ipi.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/io.h>
 
 /*
  * ES7000 chipsets
@@ -93,22 +96,28 @@ struct psai {
 };
 
 #ifdef CONFIG_ACPI
+
 struct es7000_oem_table {
 	struct acpi_table_header	Header;
 	u32				OEMTableAddr;
 	u32				OEMTableSize;
 };
+
+static unsigned long			oem_addrX;
+static unsigned long			oem_size;
+
 #endif
 
 /*
  * ES7000 Globals
  */
 
-static volatile unsigned long		*psai = NULL;
+static volatile unsigned long		*psai;
 static struct mip_reg			*mip_reg;
 static struct mip_reg			*host_reg;
 static int 				mip_port;
-static unsigned long			mip_addr, host_addr;
+static unsigned long			mip_addr;
+static unsigned long			host_addr;
 
 int					es7000_plat;
 
@@ -252,31 +261,35 @@ static int __init parse_unisys_oem(char *oemptr)
 }
 
 #ifdef CONFIG_ACPI
-
-static unsigned long			oem_addrX;
-static unsigned long			oem_size;
-
 static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
-	int i = 0;
+	struct es7000_oem_table *table;
 	acpi_size tbl_size;
+	acpi_status ret;
+	int i = 0;
 
-	while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) {
-		if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
-			struct es7000_oem_table *t = (void *)header;
+	for (;;) {
+		ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size);
+		if (!ACPI_SUCCESS(ret))
+			return -1;
 
-			oem_addrX = t->OEMTableAddr;
-			oem_size = t->OEMTableSize;
-			early_acpi_os_unmap_memory(header, tbl_size);
+		if (!memcmp((char *) &header->oem_id, "UNISYS", 6))
+			break;
 
-			*oem_addr = (unsigned long)__acpi_map_table(oem_addrX,
-								    oem_size);
-			return 0;
-		}
 		early_acpi_os_unmap_memory(header, tbl_size);
 	}
-	return -1;
+
+	table = (void *)header;
+
+	oem_addrX	= table->OEMTableAddr;
+	oem_size	= table->OEMTableSize;
+
+	early_acpi_os_unmap_memory(header, tbl_size);
+
+	*oem_addr	= (unsigned long)__acpi_map_table(oem_addrX, oem_size);
+
+	return 0;
 }
 
 static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
@@ -286,7 +299,47 @@ static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 
 	__acpi_unmap_table((char *)oem_addr, oem_size);
 }
-#endif
+
+static int es7000_check_dsdt(void)
+{
+	struct acpi_table_header header;
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
+		return 1;
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	unsigned long oem_addr = 0;
+	int check_dsdt;
+	int ret = 0;
+
+	/* check dsdt at first to avoid clear fix_map for oem_addr */
+	check_dsdt = es7000_check_dsdt();
+
+	if (!find_unisys_acpi_oem_table(&oem_addr)) {
+		if (check_dsdt) {
+			ret = parse_unisys_oem((char *)oem_addr);
+		} else {
+			setup_unisys();
+			ret = 1;
+		}
+		/*
+		 * we need to unmap it
+		 */
+		unmap_unisys_acpi_oem_table(oem_addr);
+	}
+	return ret;
+}
+#else /* !CONFIG_ACPI: */
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+#endif /* !CONFIG_ACPI */
 
 static void es7000_spin(int n)
 {
@@ -305,7 +358,7 @@ es7000_mip_write(struct mip_reg *mip_reg)
 	spin = MIP_SPIN;
 	while ((host_reg->off_0x38 & MIP_VALID) != 0) {
 		if (--spin <= 0) {
-			printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+			WARN(1,	"Timeout waiting for Host Valid Flag\n");
 			return -1;
 		}
 		es7000_spin(MIP_SPIN);
@@ -318,7 +371,7 @@ es7000_mip_write(struct mip_reg *mip_reg)
 
 	while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
 		if (--spin <= 0) {
-			printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
+			WARN(1,	"Timeout waiting for MIP Valid Flag\n");
 			return -1;
 		}
 		es7000_spin(MIP_SPIN);
@@ -338,15 +391,13 @@ static void __init es7000_enable_apic_mode(void)
 	if (!es7000_plat)
 		return;
 
-	printk("ES7000: Enabling APIC mode.\n");
+	printk(KERN_INFO "ES7000: Enabling APIC mode.\n");
 	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
 	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
 	es7000_mip_reg.off_0x38 = MIP_VALID;
 
-	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0) {
-		printk("es7000_enable_apic_mode: command failed, status = %x\n",
-			mip_status);
-	}
+	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+		WARN(1, "Command failed, status = %x\n", mip_status);
 }
 
 static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
@@ -377,18 +428,6 @@ static unsigned int es7000_get_apic_id(unsigned long x)
 	return (x >> 24) & 0xFF;
 }
 
-#ifdef CONFIG_ACPI
-static int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-#endif
-
 static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
 {
 	default_send_IPI_mask_sequence_phys(mask, vector);
@@ -466,10 +505,12 @@ static void es7000_init_apic_ldr(void)
 static void es7000_setup_apic_routing(void)
 {
 	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-	printk("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+
+	printk(KERN_INFO
+	  "Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
 		(apic_version[apic] == 0x14) ?
 			"Physical Cluster" : "Logical Cluster",
-			nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
+		nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
 }
 
 static int es7000_apicid_to_node(int logical_apicid)
@@ -488,13 +529,14 @@ static int es7000_cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
+static int cpu_id;
+
 static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
 {
-	static int id = 0;
 	physid_mask_t mask;
 
-	mask = physid_mask_of_physid(id);
-	++id;
+	mask = physid_mask_of_physid(cpu_id);
+	++cpu_id;
 
 	return mask;
 }
@@ -547,7 +589,7 @@ es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 
 			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk("%s: Not a valid mask!\n", __func__);
+				WARN(1, "Not a valid mask!");
 
 				return 0xFF;
 			}
@@ -648,38 +690,6 @@ es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 	return 0;
 }
 
-#ifdef CONFIG_ACPI
-/* Hook from generic ACPI tables.c */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	unsigned long oem_addr = 0;
-	int check_dsdt;
-	int ret = 0;
-
-	/* check dsdt at first to avoid clear fix_map for oem_addr */
-	check_dsdt = es7000_check_dsdt();
-
-	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (check_dsdt) {
-			ret = parse_unisys_oem((char *)oem_addr);
-		} else {
-			setup_unisys();
-			ret = 1;
-		}
-		/*
-		 * we need to unmap it
-		 */
-		unmap_unisys_acpi_oem_table(oem_addr);
-	}
-	return ret;
-}
-#else
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-#endif
-
 
 struct genapic apic_es7000 = {
 
-- 
cgit v1.2.3


From 36afc3af04f4d3dfa709f7659fcadb3336d66ed2 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 15:50:25 +0100
Subject: x86, numaq_32: clean up

Impact: cleanup

- refactor smp_dump_qct()
- tidy up include files, remove duplicates
- misc other cleanups, pointed out by checkpatch

No code changed:

md5:
   9c0bc01a53558c77df0f2ebcda7e11a9  numaq_32.o.before.asm
   9c0bc01a53558c77df0f2ebcda7e11a9  numaq_32.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/numaq_32.c | 195 +++++++++++++++++++++++----------------------
 1 file changed, 100 insertions(+), 95 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 15328500de6..a4ea08a9ac9 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -22,21 +22,54 @@
  *
  * Send feedback to <gone@us.ibm.com>
  */
-
 #include <linux/nodemask.h>
 #include <linux/bootmem.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
 #include <linux/mmzone.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
 #include <linux/mm.h>
 
 #include <asm/processor.h>
 #include <asm/topology.h>
-#include <asm/apic.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
 #include <asm/numaq.h>
 #include <asm/setup.h>
+#include <asm/apic.h>
 #include <asm/e820.h>
+#include <asm/ipi.h>
+#include <asm/io.h>
 
-#define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
+#define	MB_TO_PAGES(addr)		((addr) << (20 - PAGE_SHIFT))
+
+static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
+{
+	struct eachquadmem *eq = scd->eq + node;
+
+	node_set_online(node);
+
+	/* Convert to pages */
+	node_start_pfn[node] =
+		 MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
+
+	node_end_pfn[node] =
+		 MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+
+	e820_register_active_regions(node, node_start_pfn[node],
+						node_end_pfn[node]);
+
+	memory_present(node, node_start_pfn[node], node_end_pfn[node]);
+
+	node_remap_size[node] = node_memmap_size_bytes(node,
+					node_start_pfn[node],
+					node_end_pfn[node]);
+}
 
 /*
  * Function: smp_dump_qct()
@@ -46,34 +79,18 @@
  */
 static void __init smp_dump_qct(void)
 {
+	struct sys_cfg_data *scd;
 	int node;
-	struct eachquadmem *eq;
-	struct sys_cfg_data *scd =
-		(struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+	scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
 
 	nodes_clear(node_online_map);
 	for_each_node(node) {
-		if (scd->quads_present31_0 & (1 << node)) {
-			node_set_online(node);
-			eq = &scd->eq[node];
-			/* Convert to pages */
-			node_start_pfn[node] = MB_TO_PAGES(
-				eq->hi_shrd_mem_start - eq->priv_mem_size);
-			node_end_pfn[node] = MB_TO_PAGES(
-				eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
-
-			e820_register_active_regions(node, node_start_pfn[node],
-							node_end_pfn[node]);
-			memory_present(node,
-				node_start_pfn[node], node_end_pfn[node]);
-			node_remap_size[node] = node_memmap_size_bytes(node,
-							node_start_pfn[node],
-							node_end_pfn[node]);
-		}
+		if (scd->quads_present31_0 & (1 << node))
+			numaq_register_node(node, scd);
 	}
 }
 
-
 void __cpuinit numaq_tsc_disable(void)
 {
 	if (!found_numaq)
@@ -98,20 +115,20 @@ int found_numaq;
  * hence the mpc_record variable .... can't see a less disgusting way of
  * doing this ....
  */
-struct mpc_config_translation {
-	unsigned char		mpc_type;
-	unsigned char		trans_len;
-	unsigned char		trans_type;
-	unsigned char		trans_quad;
-	unsigned char		trans_global;
-	unsigned char		trans_local;
-	unsigned short		trans_reserved;
+struct mpc_trans {
+	unsigned char			mpc_type;
+	unsigned char			trans_len;
+	unsigned char			trans_type;
+	unsigned char			trans_quad;
+	unsigned char			trans_global;
+	unsigned char			trans_local;
+	unsigned short			trans_reserved;
 };
 
 /* x86_quirks member */
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
-    __cpuinitdata;
+static int				mpc_record;
+
+static __cpuinitdata struct mpc_trans	*translation_table[MAX_MPC_ENTRY];
 
 static inline int generate_logical_apicid(int quad, int phys_apicid)
 {
@@ -124,10 +141,12 @@ static int mpc_apic_id(struct mpc_cpu *m)
 	int quad = translation_table[mpc_record]->trans_quad;
 	int logical_apicid = generate_logical_apicid(quad, m->apicid);
 
-	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->apicver, quad, logical_apicid);
+	printk(KERN_DEBUG
+		"Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+		 m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
+		(m->cpufeature & CPU_MODEL_MASK) >> 4,
+		 m->apicver, quad, logical_apicid);
+
 	return logical_apicid;
 }
 
@@ -143,11 +162,11 @@ static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
 
 	mp_bus_id_to_node[m->busid] = quad;
 	mp_bus_id_to_local[m->busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->busid, name, quad);
+
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
 }
 
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+int quad_local_to_mp_bus_id[NR_CPUS/4][4];
 
 /* x86_quirks member */
 static void mpc_oem_pci_bus(struct mpc_bus *m)
@@ -158,7 +177,7 @@ static void mpc_oem_pci_bus(struct mpc_bus *m)
 	quad_local_to_mp_bus_id[quad][local] = m->busid;
 }
 
-static void __init MP_translation_info(struct mpc_config_translation *m)
+static void __init MP_translation_info(struct mpc_trans *m)
 {
 	printk(KERN_INFO
 	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
@@ -168,7 +187,8 @@ static void __init MP_translation_info(struct mpc_config_translation *m)
 	if (mpc_record >= MAX_MPC_ENTRY)
 		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
 	else
-		translation_table[mpc_record] = m;	/* stash this for later */
+		translation_table[mpc_record] = m; /* stash this for later */
+
 	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
 		node_set_online(m->trans_quad);
 }
@@ -186,16 +206,16 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 /*
  * Read/parse the MPC oem tables
  */
-
-static void __init smp_read_mpc_oem(struct mpc_oemtable *oemtable,
-				    unsigned short oemsize)
+static void __init
+ smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
 {
 	int count = sizeof(*oemtable);	/* the header size */
 	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
 
 	mpc_record = 0;
-	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
-	       oemtable);
+	printk(KERN_INFO
+		"Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+
 	if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
 		printk(KERN_WARNING
 		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
@@ -203,16 +223,18 @@ static void __init smp_read_mpc_oem(struct mpc_oemtable *oemtable,
 		       oemtable->signature[2], oemtable->signature[3]);
 		return;
 	}
+
 	if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
 		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
 		return;
 	}
+
 	while (count < oemtable->length) {
 		switch (*oemptr) {
 		case MP_TRANSLATION:
 			{
-				struct mpc_config_translation *m =
-				    (struct mpc_config_translation *)oemptr;
+				struct mpc_trans *m = (void *)oemptr;
+
 				MP_translation_info(m);
 				oemptr += sizeof(*m);
 				count += sizeof(*m);
@@ -220,12 +242,10 @@ static void __init smp_read_mpc_oem(struct mpc_oemtable *oemtable,
 				break;
 			}
 		default:
-			{
-				printk(KERN_WARNING
-				       "Unrecognised OEM table entry type! - %d\n",
-				       (int)*oemptr);
-				return;
-			}
+			printk(KERN_WARNING
+			       "Unrecognised OEM table entry type! - %d\n",
+			       (int)*oemptr);
+			return;
 		}
 	}
 }
@@ -244,21 +264,21 @@ static int __init numaq_update_genapic(void)
 }
 
 static struct x86_quirks numaq_x86_quirks __initdata = {
-	.arch_pre_time_init	= numaq_pre_time_init,
-	.arch_time_init		= NULL,
-	.arch_pre_intr_init	= NULL,
-	.arch_memory_setup	= NULL,
-	.arch_intr_init		= NULL,
-	.arch_trap_init		= NULL,
-	.mach_get_smp_config	= NULL,
-	.mach_find_smp_config	= NULL,
-	.mpc_record		= &mpc_record,
-	.mpc_apic_id		= mpc_apic_id,
-	.mpc_oem_bus_info	= mpc_oem_bus_info,
-	.mpc_oem_pci_bus	= mpc_oem_pci_bus,
-	.smp_read_mpc_oem	= smp_read_mpc_oem,
-	.setup_ioapic_ids	= numaq_setup_ioapic_ids,
-	.update_genapic		= numaq_update_genapic,
+	.arch_pre_time_init		= numaq_pre_time_init,
+	.arch_time_init			= NULL,
+	.arch_pre_intr_init		= NULL,
+	.arch_memory_setup		= NULL,
+	.arch_intr_init			= NULL,
+	.arch_trap_init			= NULL,
+	.mach_get_smp_config		= NULL,
+	.mach_find_smp_config		= NULL,
+	.mpc_record			= &mpc_record,
+	.mpc_apic_id			= mpc_apic_id,
+	.mpc_oem_bus_info		= mpc_oem_bus_info,
+	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
+	.smp_read_mpc_oem		= smp_read_mpc_oem,
+	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
+	.update_genapic			= numaq_update_genapic,
 };
 
 void numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
@@ -275,6 +295,7 @@ static __init void early_check_numaq(void)
 	 * Find possible boot-time SMP configuration:
 	 */
 	early_find_smp_config();
+
 	/*
 	 * get boot-time SMP configuration:
 	 */
@@ -291,28 +312,10 @@ int __init get_memcfg_numaq(void)
 	if (!found_numaq)
 		return 0;
 	smp_dump_qct();
+
 	return 1;
 }
 
-/*
- * APIC driver for the IBM NUMAQ chipset.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/ipi.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/numa.h>
-#include <linux/smp.h>
-#include <asm/numaq.h>
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
 #define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
 
 static inline unsigned int numaq_get_apic_id(unsigned long x)
@@ -337,8 +340,8 @@ static inline void numaq_send_IPI_all(int vector)
 
 extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
 
-#define NUMAQ_TRAMPOLINE_PHYS_LOW (0x8)
-#define NUMAQ_TRAMPOLINE_PHYS_HIGH (0xa)
+#define NUMAQ_TRAMPOLINE_PHYS_LOW	(0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH	(0xa)
 
 /*
  * Because we use NMIs rather than the INIT-STARTUP sequence to
@@ -426,7 +429,7 @@ static inline int numaq_cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static inline int numaq_apicid_to_node(int logical_apicid) 
+static inline int numaq_apicid_to_node(int logical_apicid)
 {
 	return logical_apicid >> 4;
 }
@@ -468,7 +471,9 @@ static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
-static int __numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+
+static int
+__numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
 	numaq_mps_oem_check(mpc, oem, productid);
 	return found_numaq;
-- 
cgit v1.2.3


From cb81eaedf12d3e5e6e3dcf3320089660f7fb7464 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 17:53:54 +0100
Subject: x86, numaq_32: clean up, misc

Impact: cleanup

 - misc other cleanups that change the md5 signature
 - consolidate global variables
 - remove unnecessary __numaq_mps_oem_check() wrapper
 - make numaq_mps_oem_check static
 - update copyrights
 - misc other cleanups pointed out by checkpatch

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mpspec.h |  2 -
 arch/x86/kernel/numaq_32.c    | 97 +++++++++++++++++++++----------------------
 2 files changed, 48 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 5916c8df09d..642fc7fc8cd 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -167,6 +167,4 @@ extern int generic_mps_oem_check(struct mpc_table *, char *, char *);
 
 extern int default_acpi_madt_oem_check(char *, char *);
 
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
 #endif /* _ASM_X86_MPSPEC_H */
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index a4ea08a9ac9..62f9274a2ed 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -2,6 +2,7 @@
  * Written by: Patricia Gaughen, IBM Corporation
  *
  * Copyright (C) 2002, IBM Corp.
+ * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
  *
  * All rights reserved.
  *
@@ -23,6 +24,7 @@
  * Send feedback to <gone@us.ibm.com>
  */
 #include <linux/nodemask.h>
+#include <linux/topology.h>
 #include <linux/bootmem.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
@@ -33,10 +35,10 @@
 #include <linux/init.h>
 #include <linux/numa.h>
 #include <linux/smp.h>
+#include <linux/io.h>
 #include <linux/mm.h>
 
 #include <asm/processor.h>
-#include <asm/topology.h>
 #include <asm/fixmap.h>
 #include <asm/mpspec.h>
 #include <asm/numaq.h>
@@ -44,10 +46,36 @@
 #include <asm/apic.h>
 #include <asm/e820.h>
 #include <asm/ipi.h>
-#include <asm/io.h>
 
 #define	MB_TO_PAGES(addr)		((addr) << (20 - PAGE_SHIFT))
 
+int found_numaq;
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_trans {
+	unsigned char			mpc_type;
+	unsigned char			trans_len;
+	unsigned char			trans_type;
+	unsigned char			trans_quad;
+	unsigned char			trans_global;
+	unsigned char			trans_local;
+	unsigned short			trans_reserved;
+};
+
+/* x86_quirks member */
+static int				mpc_record;
+
+static __cpuinitdata struct mpc_trans	*translation_table[MAX_MPC_ENTRY];
+
+int					mp_bus_id_to_node[MAX_MP_BUSSES];
+int					mp_bus_id_to_local[MAX_MP_BUSSES];
+int					quad_local_to_mp_bus_id[NR_CPUS/4][4];
+
+
 static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
 {
 	struct eachquadmem *eq = scd->eq + node;
@@ -108,28 +136,6 @@ static int __init numaq_pre_time_init(void)
 	return 0;
 }
 
-int found_numaq;
-
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_trans {
-	unsigned char			mpc_type;
-	unsigned char			trans_len;
-	unsigned char			trans_type;
-	unsigned char			trans_quad;
-	unsigned char			trans_global;
-	unsigned char			trans_local;
-	unsigned short			trans_reserved;
-};
-
-/* x86_quirks member */
-static int				mpc_record;
-
-static __cpuinitdata struct mpc_trans	*translation_table[MAX_MPC_ENTRY];
-
 static inline int generate_logical_apicid(int quad, int phys_apicid)
 {
 	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
@@ -150,10 +156,6 @@ static int mpc_apic_id(struct mpc_cpu *m)
 	return logical_apicid;
 }
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-
 /* x86_quirks member */
 static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
 {
@@ -166,8 +168,6 @@ static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
 	printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
 }
 
-int quad_local_to_mp_bus_id[NR_CPUS/4][4];
-
 /* x86_quirks member */
 static void mpc_oem_pci_bus(struct mpc_bus *m)
 {
@@ -180,7 +180,7 @@ static void mpc_oem_pci_bus(struct mpc_bus *m)
 static void __init MP_translation_info(struct mpc_trans *m)
 {
 	printk(KERN_INFO
-	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	    "Translation: record %d, type %d, quad %d, global %d, local %d\n",
 	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
 	       m->trans_local);
 
@@ -281,14 +281,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.update_genapic			= numaq_update_genapic,
 };
 
-void numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  Not a NUMA-Q system!\n");
-	else
-		found_numaq = 1;
-}
-
 static __init void early_check_numaq(void)
 {
 	/*
@@ -338,8 +330,6 @@ static inline void numaq_send_IPI_all(int vector)
 	numaq_send_IPI_mask(cpu_online_mask, vector);
 }
 
-extern void numaq_mps_oem_check(struct mpc_table *, char *, char *);
-
 #define NUMAQ_TRAMPOLINE_PHYS_LOW	(0x8)
 #define NUMAQ_TRAMPOLINE_PHYS_HIGH	(0xa)
 
@@ -355,7 +345,7 @@ static inline void numaq_smp_callin_clear_local_apic(void)
 static inline void
 numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
 {
-	printk("Storing NMI vector\n");
+	printk(KERN_ERR "Storing NMI vector\n");
 	*high =
 	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
 	*low =
@@ -390,8 +380,9 @@ static inline void numaq_init_apic_ldr(void)
 
 static inline void numaq_setup_apic_routing(void)
 {
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"NUMA-Q", nr_ioapics);
+	printk(KERN_INFO
+		"Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
+		nr_ioapics);
 }
 
 /*
@@ -473,9 +464,13 @@ static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
 }
 
 static int
-__numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
-	numaq_mps_oem_check(mpc, oem, productid);
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+
 	return found_numaq;
 }
 
@@ -505,9 +500,13 @@ static void numaq_setup_portio_remap(void)
 	if (num_quads <= 1)
 		return;
 
-	printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+	printk(KERN_INFO
+		"Remapping cross-quad port I/O for %d quads\n", num_quads);
+
 	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-	printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+
+	printk(KERN_INFO
+		"xquad_portio vaddr 0x%08lx, len %08lx\n",
 		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 }
 
@@ -542,7 +541,7 @@ struct genapic apic_numaq = {
 	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
 	.phys_pkg_id			= numaq_phys_pkg_id,
-	.mps_oem_check			= __numaq_mps_oem_check,
+	.mps_oem_check			= numaq_mps_oem_check,
 
 	.get_apic_id			= numaq_get_apic_id,
 	.set_apic_id			= NULL,
-- 
cgit v1.2.3


From ab6fb7c0b03e2c3286f316c840347be8b9ee3d9f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 16:22:09 +0100
Subject: x86, apic: remove ->store_NMI_vector()

Impact: cleanup

It's not used by anything anymore.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h         |  1 -
 arch/x86/kernel/bigsmp_32.c         |  1 -
 arch/x86/kernel/es7000_32.c         |  1 -
 arch/x86/kernel/genapic_flat_64.c   |  2 --
 arch/x86/kernel/genx2apic_cluster.c |  1 -
 arch/x86/kernel/genx2apic_phys.c    |  1 -
 arch/x86/kernel/genx2apic_uv_x.c    |  1 -
 arch/x86/kernel/numaq_32.c          | 11 -----------
 arch/x86/kernel/probe_32.c          |  1 -
 arch/x86/kernel/smpboot.c           | 13 +++++--------
 arch/x86/kernel/summit_32.c         |  1 -
 11 files changed, 5 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 2cdd19e4536..122d8eda275 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -313,7 +313,6 @@ struct genapic {
 
 	void (*wait_for_init_deassert)(atomic_t *deassert);
 	void (*smp_callin_clear_local_apic)(void);
-	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
 	void (*inquire_remote_apic)(int apicid);
 
 	/* apic ops */
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 0de9eed7c60..17c25bc26a5 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -263,7 +263,6 @@ struct genapic apic_bigsmp = {
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 3519f8cab70..1d6e99a8edc 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -746,7 +746,6 @@ struct genapic apic_es7000 = {
 
 	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index a7d84763648..27b81208009 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -227,7 +227,6 @@ struct genapic apic_flat =  {
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_mem_read,
@@ -379,7 +378,6 @@ struct genapic apic_physflat =  {
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_mem_read,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index f5e02cffa26..b9ef0091c4d 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -232,7 +232,6 @@ struct genapic apic_x2apic_cluster = {
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_msr_read,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index 11eb4cb7ca3..bb752015776 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -218,7 +218,6 @@ struct genapic apic_x2apic_phys = {
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_msr_read,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index c1746a198bd..dcb8c14287d 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -290,7 +290,6 @@ struct genapic apic_x2apic_uv_x = {
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_msr_read,
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 62f9274a2ed..a709de87819 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -342,16 +342,6 @@ static inline void numaq_smp_callin_clear_local_apic(void)
 	clear_local_APIC();
 }
 
-static inline void
-numaq_store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-	printk(KERN_ERR "Storing NMI vector\n");
-	*high =
-	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_HIGH));
-	*low =
-	  *((volatile unsigned short *)phys_to_virt(NUMAQ_TRAMPOLINE_PHYS_LOW));
-}
-
 static inline const cpumask_t *numaq_target_cpus(void)
 {
 	return &CPU_MASK_ALL;
@@ -564,7 +554,6 @@ struct genapic apic_numaq = {
 	.wait_for_init_deassert		= NULL,
 
 	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
-	.store_NMI_vector		= numaq_store_NMI_vector,
 	.inquire_remote_apic		= NULL,
 
 	.read				= native_apic_mem_read,
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index fd1352ac909..5914ffb6e40 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -131,7 +131,6 @@ struct genapic apic_default = {
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 09e73876a44..9ce666387f3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -745,21 +745,21 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 	complete(&c_idle->done);
 }
 
-static int __cpuinit do_boot_cpu(int apicid, int cpu)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
  * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
  * Returns zero if CPU booted OK, else error code from ->wakeup_cpu.
  */
+static int __cpuinit do_boot_cpu(int apicid, int cpu)
 {
 	unsigned long boot_error = 0;
-	int timeout;
 	unsigned long start_ip;
-	unsigned short nmi_high = 0, nmi_low = 0;
+	int timeout;
 	struct create_idle c_idle = {
-		.cpu = cpu,
-		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+		.cpu	= cpu,
+		.done	= COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
 	};
+
 	INIT_WORK(&c_idle.work, do_fork_idle);
 
 	alternatives_smp_switch(1);
@@ -824,9 +824,6 @@ do_rest:
 
 		pr_debug("Setting warm reset code and vector.\n");
 
-		if (apic->store_NMI_vector)
-			apic->store_NMI_vector(&nmi_high, &nmi_low);
-
 		smpboot_setup_warm_reset_vector(start_ip);
 		/*
 		 * Be paranoid about clearing APIC errors.
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index c4690349a54..8f1a11b072a 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -590,7 +590,6 @@ struct genapic apic_summit = {
 	.wait_for_init_deassert		= default_wait_for_init_deassert,
 
 	.smp_callin_clear_local_apic	= NULL,
-	.store_NMI_vector		= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
-- 
cgit v1.2.3


From be163a159b223e94b3180afdd47a8d468eb9a492 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 16:28:46 +0100
Subject: x86, apic: rename 'genapic' to 'apic'

Impact: cleanup

Now that all APIC code is consolidated there's nothing 'gen' about
apics anymore - so rename 'struct genapic' to 'struct apic'.

This shortens the code and is nicer to read as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h         | 18 +++++++++---------
 arch/x86/include/asm/setup.h        |  2 +-
 arch/x86/kernel/bigsmp_32.c         |  2 +-
 arch/x86/kernel/es7000_32.c         | 10 +++++-----
 arch/x86/kernel/genapic_64.c        | 18 +++++++++---------
 arch/x86/kernel/genapic_flat_64.c   |  4 ++--
 arch/x86/kernel/genx2apic_cluster.c |  2 +-
 arch/x86/kernel/genx2apic_phys.c    |  2 +-
 arch/x86/kernel/genx2apic_uv_x.c    |  2 +-
 arch/x86/kernel/numaq_32.c          |  6 +++---
 arch/x86/kernel/probe_32.c          | 36 ++++++++++++++++++------------------
 arch/x86/kernel/setup.c             |  4 ++--
 arch/x86/kernel/summit_32.c         |  2 +-
 13 files changed, 54 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 122d8eda275..dce1bf696cc 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -248,7 +248,7 @@ static inline void disable_local_APIC(void) { }
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
  */
-struct genapic {
+struct apic {
 	char *name;
 
 	int (*probe)(void);
@@ -283,7 +283,7 @@ struct genapic {
 	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
 
 	/*
-	 * When one of the next two hooks returns 1 the genapic
+	 * When one of the next two hooks returns 1 the apic
 	 * is switched to this. Essentially they are additional
 	 * probe functions:
 	 */
@@ -324,7 +324,7 @@ struct genapic {
 	u32 (*safe_wait_icr_idle)(void);
 };
 
-extern struct genapic *apic;
+extern struct apic *apic;
 
 static inline u32 apic_read(u32 reg)
 {
@@ -385,17 +385,17 @@ static inline unsigned default_get_apic_id(unsigned long x)
 #define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
 
 #ifdef CONFIG_X86_32
-extern void es7000_update_genapic_to_cluster(void);
+extern void es7000_update_apic_to_cluster(void);
 #else
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
-extern struct genapic apic_x2apic_cluster;
-extern struct genapic apic_x2apic_phys;
+extern struct apic apic_flat;
+extern struct apic apic_physflat;
+extern struct apic apic_x2apic_cluster;
+extern struct apic apic_x2apic_phys;
 extern int default_acpi_madt_oem_check(char *, char *);
 
 extern void apic_send_IPI_self(int vector);
 
-extern struct genapic apic_x2apic_uv_x;
+extern struct apic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
 extern int default_cpu_present_to_apicid(int mps_cpu);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index c230189462a..8029369cd6f 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -30,7 +30,7 @@ struct x86_quirks {
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
 				unsigned short oemsize);
 	int (*setup_ioapic_ids)(void);
-	int (*update_genapic)(void);
+	int (*update_apic)(void);
 };
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
index 17c25bc26a5..0b1093394fd 100644
--- a/arch/x86/kernel/bigsmp_32.c
+++ b/arch/x86/kernel/bigsmp_32.c
@@ -210,7 +210,7 @@ static int probe_bigsmp(void)
 	return dmi_bigsmp;
 }
 
-struct genapic apic_bigsmp = {
+struct apic apic_bigsmp = {
 
 	.name				= "bigsmp",
 	.probe				= probe_bigsmp,
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
index 1d6e99a8edc..320f2d2e4e5 100644
--- a/arch/x86/kernel/es7000_32.c
+++ b/arch/x86/kernel/es7000_32.c
@@ -163,14 +163,14 @@ static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 	return 0;
 }
 
-static int __init es7000_update_genapic(void)
+static int __init es7000_update_apic(void)
 {
 	apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
 
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
 	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) {
-		es7000_update_genapic_to_cluster();
+		es7000_update_apic_to_cluster();
 		apic->wait_for_init_deassert = NULL;
 		apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
 	}
@@ -193,7 +193,7 @@ static void __init setup_unisys(void)
 		es7000_plat = ES7000_CLASSIC;
 	ioapic_renumber_irq = es7000_rename_gsi;
 
-	x86_quirks->update_genapic = es7000_update_genapic;
+	x86_quirks->update_apic = es7000_update_apic;
 }
 
 /*
@@ -659,7 +659,7 @@ static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-void __init es7000_update_genapic_to_cluster(void)
+void __init es7000_update_apic_to_cluster(void)
 {
 	apic->target_cpus = target_cpus_cluster;
 	apic->irq_delivery_mode = dest_LowestPrio;
@@ -691,7 +691,7 @@ es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 }
 
 
-struct genapic apic_es7000 = {
+struct apic apic_es7000 = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 91cae6f6e73..70935dd904d 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -23,16 +23,16 @@
 #include <asm/ipi.h>
 #include <asm/setup.h>
 
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
-extern struct genapic apic_x2xpic_uv_x;
-extern struct genapic apic_x2apic_phys;
-extern struct genapic apic_x2apic_cluster;
+extern struct apic apic_flat;
+extern struct apic apic_physflat;
+extern struct apic apic_x2xpic_uv_x;
+extern struct apic apic_x2apic_phys;
+extern struct apic apic_x2apic_cluster;
 
-struct genapic __read_mostly *apic = &apic_flat;
+struct apic __read_mostly *apic = &apic_flat;
 EXPORT_SYMBOL_GPL(apic);
 
-static struct genapic *apic_probe[] __initdata = {
+static struct apic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_UV
 	&apic_x2apic_uv_x,
 #endif
@@ -62,8 +62,8 @@ void __init default_setup_apic_routing(void)
 		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 
-	if (x86_quirks->update_genapic)
-		x86_quirks->update_genapic();
+	if (x86_quirks->update_apic)
+		x86_quirks->update_apic();
 }
 
 /* Same for both flat and physical. */
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 27b81208009..3b002995e14 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -178,7 +178,7 @@ static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
 	return hard_smp_processor_id() >> index_msb;
 }
 
-struct genapic apic_flat =  {
+struct apic apic_flat =  {
 	.name				= "flat",
 	.probe				= NULL,
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
@@ -327,7 +327,7 @@ physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-struct genapic apic_physflat =  {
+struct apic apic_physflat =  {
 
 	.name				= "physical flat",
 	.probe				= NULL,
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
index b9ef0091c4d..4e39d9ad4d5 100644
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ b/arch/x86/kernel/genx2apic_cluster.c
@@ -182,7 +182,7 @@ static void init_x2apic_ldr(void)
 	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
 }
 
-struct genapic apic_x2apic_cluster = {
+struct apic apic_x2apic_cluster = {
 
 	.name				= "cluster x2apic",
 	.probe				= NULL,
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
index bb752015776..d2d52eb9f7e 100644
--- a/arch/x86/kernel/genx2apic_phys.c
+++ b/arch/x86/kernel/genx2apic_phys.c
@@ -168,7 +168,7 @@ static void init_x2apic_ldr(void)
 {
 }
 
-struct genapic apic_x2apic_phys = {
+struct apic apic_x2apic_phys = {
 
 	.name				= "physical x2apic",
 	.probe				= NULL,
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index dcb8c14287d..20b4ad07c3a 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -240,7 +240,7 @@ static void uv_send_IPI_self(int vector)
 	apic_write(APIC_SELF_IPI, vector);
 }
 
-struct genapic apic_x2apic_uv_x = {
+struct apic apic_x2apic_uv_x = {
 
 	.name				= "UV large system",
 	.probe				= NULL,
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index a709de87819..d9d6d61eed8 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -256,7 +256,7 @@ static int __init numaq_setup_ioapic_ids(void)
 	return 1;
 }
 
-static int __init numaq_update_genapic(void)
+static int __init numaq_update_apic(void)
 {
 	apic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;
 
@@ -278,7 +278,7 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
 	.smp_read_mpc_oem		= smp_read_mpc_oem,
 	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
-	.update_genapic			= numaq_update_genapic,
+	.update_apic			= numaq_update_apic,
 };
 
 static __init void early_check_numaq(void)
@@ -500,7 +500,7 @@ static void numaq_setup_portio_remap(void)
 		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 }
 
-struct genapic apic_numaq = {
+struct apic apic_numaq = {
 
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
index 5914ffb6e40..5fa48332c5c 100644
--- a/arch/x86/kernel/probe_32.c
+++ b/arch/x86/kernel/probe_32.c
@@ -78,7 +78,7 @@ static int probe_default(void)
 	return 1;
 }
 
-struct genapic apic_default = {
+struct apic apic_default = {
 
 	.name				= "default",
 	.probe				= probe_default,
@@ -141,16 +141,16 @@ struct genapic apic_default = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
 
-extern struct genapic apic_numaq;
-extern struct genapic apic_summit;
-extern struct genapic apic_bigsmp;
-extern struct genapic apic_es7000;
-extern struct genapic apic_default;
+extern struct apic apic_numaq;
+extern struct apic apic_summit;
+extern struct apic apic_bigsmp;
+extern struct apic apic_es7000;
+extern struct apic apic_default;
 
-struct genapic *apic = &apic_default;
+struct apic *apic = &apic_default;
 EXPORT_SYMBOL_GPL(apic);
 
-static struct genapic *apic_probe[] __initdata = {
+static struct apic *apic_probe[] __initdata = {
 #ifdef CONFIG_X86_NUMAQ
 	&apic_numaq,
 #endif
@@ -183,8 +183,8 @@ static int __init parse_apic(char *arg)
 		}
 	}
 
-	if (x86_quirks->update_genapic)
-		x86_quirks->update_genapic();
+	if (x86_quirks->update_apic)
+		x86_quirks->update_apic();
 
 	/* Parsed again by __setup for debug/verbose */
 	return 0;
@@ -204,8 +204,8 @@ void __init generic_bigsmp_probe(void)
 	if (!cmdline_apic && apic == &apic_default) {
 		if (apic_bigsmp.probe()) {
 			apic = &apic_bigsmp;
-			if (x86_quirks->update_genapic)
-				x86_quirks->update_genapic();
+			if (x86_quirks->update_apic)
+				x86_quirks->update_apic();
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       apic->name);
 		}
@@ -227,8 +227,8 @@ void __init generic_apic_probe(void)
 		if (!apic_probe[i])
 			panic("Didn't find an APIC driver");
 
-		if (x86_quirks->update_genapic)
-			x86_quirks->update_genapic();
+		if (x86_quirks->update_apic)
+			x86_quirks->update_apic();
 	}
 	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
 }
@@ -248,8 +248,8 @@ generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 
 		if (!cmdline_apic) {
 			apic = apic_probe[i];
-			if (x86_quirks->update_genapic)
-				x86_quirks->update_genapic();
+			if (x86_quirks->update_apic)
+				x86_quirks->update_apic();
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
@@ -270,8 +270,8 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 
 		if (!cmdline_apic) {
 			apic = apic_probe[i];
-			if (x86_quirks->update_genapic)
-				x86_quirks->update_genapic();
+			if (x86_quirks->update_apic)
+				x86_quirks->update_apic();
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b2da0b1d15e..6b588d6b388 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -599,7 +599,7 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
-static int __init default_update_genapic(void)
+static int __init default_update_apic(void)
 {
 #ifdef CONFIG_SMP
 	if (!apic->wakeup_cpu)
@@ -610,7 +610,7 @@ static int __init default_update_genapic(void)
 }
 
 static struct x86_quirks default_x86_quirks __initdata = {
-	.update_genapic         = default_update_genapic,
+	.update_apic         = default_update_apic,
 };
 
 struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 8f1a11b072a..cfe7b09015d 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -537,7 +537,7 @@ void __init setup_summit(void)
 }
 #endif
 
-struct genapic apic_summit = {
+struct apic apic_summit = {
 
 	.name				= "summit",
 	.probe				= probe_summit,
-- 
cgit v1.2.3


From f62bae5009c1ba596cd475cafbc83e0570a36e26 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 18:09:24 +0100
Subject: x86, apic: move APIC drivers to arch/x86/kernel/apic/*

arch/x86/kernel/ is getting a bit crowded, and the APIC
drivers are scattered into various different files.

Move them to arch/x86/kernel/apic/*, and also remove
the 'gen' prefix from those which had it.

Also move APIC related functionality: the IO-APIC driver,
the NMI and the IPI code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile              |   27 +-
 arch/x86/kernel/apic.c                | 2212 ------------------
 arch/x86/kernel/apic/Makefile         |   15 +
 arch/x86/kernel/apic/apic.c           | 2212 ++++++++++++++++++
 arch/x86/kernel/apic/apic_64.c        |   89 +
 arch/x86/kernel/apic/apic_flat_64.c   |  389 +++
 arch/x86/kernel/apic/io_apic.c        | 4160 +++++++++++++++++++++++++++++++++
 arch/x86/kernel/apic/ipi.c            |  164 ++
 arch/x86/kernel/apic/nmi.c            |  564 +++++
 arch/x86/kernel/apic/x2apic_cluster.c |  243 ++
 arch/x86/kernel/apic/x2apic_phys.c    |  229 ++
 arch/x86/kernel/apic/x2apic_uv_x.c    |  643 +++++
 arch/x86/kernel/genapic_64.c          |   89 -
 arch/x86/kernel/genapic_flat_64.c     |  389 ---
 arch/x86/kernel/genx2apic_cluster.c   |  243 --
 arch/x86/kernel/genx2apic_phys.c      |  229 --
 arch/x86/kernel/genx2apic_uv_x.c      |  643 -----
 arch/x86/kernel/io_apic.c             | 4160 ---------------------------------
 arch/x86/kernel/ipi.c                 |  164 --
 arch/x86/kernel/nmi.c                 |  564 -----
 20 files changed, 8719 insertions(+), 8709 deletions(-)
 delete mode 100644 arch/x86/kernel/apic.c
 create mode 100644 arch/x86/kernel/apic/Makefile
 create mode 100644 arch/x86/kernel/apic/apic.c
 create mode 100644 arch/x86/kernel/apic/apic_64.c
 create mode 100644 arch/x86/kernel/apic/apic_flat_64.c
 create mode 100644 arch/x86/kernel/apic/io_apic.c
 create mode 100644 arch/x86/kernel/apic/ipi.c
 create mode 100644 arch/x86/kernel/apic/nmi.c
 create mode 100644 arch/x86/kernel/apic/x2apic_cluster.c
 create mode 100644 arch/x86/kernel/apic/x2apic_phys.c
 create mode 100644 arch/x86/kernel/apic/x2apic_uv_x.c
 delete mode 100644 arch/x86/kernel/genapic_64.c
 delete mode 100644 arch/x86/kernel/genapic_flat_64.c
 delete mode 100644 arch/x86/kernel/genx2apic_cluster.c
 delete mode 100644 arch/x86/kernel/genx2apic_phys.c
 delete mode 100644 arch/x86/kernel/genx2apic_uv_x.c
 delete mode 100644 arch/x86/kernel/io_apic.c
 delete mode 100644 arch/x86/kernel/ipi.c
 delete mode 100644 arch/x86/kernel/nmi.c

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 1cefd218f76..9139ff69471 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -58,13 +58,12 @@ obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SMP)		+= smpboot.o tsc_sync.o ipi.o
+obj-$(CONFIG_SMP)		+= smpboot.o tsc_sync.o
 obj-$(CONFIG_SMP)		+= setup_percpu.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o ipi.o
-obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic/
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
@@ -116,17 +115,13 @@ obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb_64.o # NB rename without _64
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
-        obj-y				+= genapic_64.o genapic_flat_64.o
-        obj-$(CONFIG_X86_X2APIC)	+= genx2apic_cluster.o
-        obj-$(CONFIG_X86_X2APIC)	+= genx2apic_phys.o
-	obj-$(CONFIG_X86_UV)		+= genx2apic_uv_x.o tlb_uv.o
-	obj-$(CONFIG_X86_UV)		+= bios_uv.o uv_irq.o uv_sysfs.o
-        obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
-        obj-$(CONFIG_AUDIT)		+= audit_64.o
-
-        obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
-        obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
-        obj-$(CONFIG_AMD_IOMMU)		+= amd_iommu_init.o amd_iommu.o
-
-        obj-$(CONFIG_PCI_MMCONFIG)	+= mmconf-fam10h_64.o
+	obj-$(CONFIG_X86_UV)		+= tlb_uv.o bios_uv.o uv_irq.o uv_sysfs.o
+	obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
+	obj-$(CONFIG_AUDIT)		+= audit_64.o
+
+	obj-$(CONFIG_GART_IOMMU)	+= pci-gart_64.o aperture_64.o
+	obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
+	obj-$(CONFIG_AMD_IOMMU)		+= amd_iommu_init.o amd_iommu.o
+
+	obj-$(CONFIG_PCI_MMCONFIG)	+= mmconf-fam10h_64.o
 endif
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
deleted file mode 100644
index c12823eb55b..00000000000
--- a/arch/x86/kernel/apic.c
+++ /dev/null
@@ -1,2212 +0,0 @@
-/*
- *	Local APIC handling, local APIC timers
- *
- *	(c) 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively.
- *	Maciej W. Rozycki	:	Various updates and fixes.
- *	Mikael Pettersson	:	Power Management for UP-APIC.
- *	Pavel Machek and
- *	Mikael Pettersson	:	PM converted to driver model.
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi_pmtmr.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/bootmem.h>
-#include <linux/ftrace.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/delay.h>
-#include <linux/timex.h>
-#include <linux/dmar.h>
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/dmi.h>
-#include <linux/nmi.h>
-#include <linux/smp.h>
-#include <linux/mm.h>
-
-#include <asm/arch_hooks.h>
-#include <asm/pgalloc.h>
-#include <asm/atomic.h>
-#include <asm/mpspec.h>
-#include <asm/i8253.h>
-#include <asm/i8259.h>
-#include <asm/proto.h>
-#include <asm/apic.h>
-#include <asm/desc.h>
-#include <asm/hpet.h>
-#include <asm/idle.h>
-#include <asm/mtrr.h>
-#include <asm/smp.h>
-
-unsigned int num_processors;
-
-unsigned disabled_cpus __cpuinitdata;
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-
-/*
- * The highest APIC ID seen during enumeration.
- *
- * This determines the messaging protocol we can use: if all APIC IDs
- * are in the 0 ... 7 range, then we can use logical addressing which
- * has some performance advantages (better broadcasting).
- *
- * If there's an APIC ID above 8, we use physical addressing.
- */
-unsigned int max_physical_apicid;
-
-/*
- * Bitmask of physically existing CPUs:
- */
-physid_mask_t phys_cpu_present_map;
-
-/*
- * Map cpu index to physical APIC ID
- */
-DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
-DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
-#ifdef CONFIG_X86_32
-/*
- * Knob to control our willingness to enable the local APIC.
- *
- * +1=force-enable
- */
-static int force_enable_local_apic;
-/*
- * APIC command line parameters
- */
-static int __init parse_lapic(char *arg)
-{
-	force_enable_local_apic = 1;
-	return 0;
-}
-early_param("lapic", parse_lapic);
-/* Local APIC was disabled by the BIOS and enabled by the kernel */
-static int enabled_via_apicbase;
-
-#endif
-
-#ifdef CONFIG_X86_64
-static int apic_calibrate_pmtmr __initdata;
-static __init int setup_apicpmtimer(char *s)
-{
-	apic_calibrate_pmtmr = 1;
-	notsc_setup(NULL);
-	return 0;
-}
-__setup("apicpmtimer", setup_apicpmtimer);
-#endif
-
-#ifdef CONFIG_X86_X2APIC
-int x2apic;
-/* x2apic enabled before OS handover */
-static int x2apic_preenabled;
-static int disable_x2apic;
-static __init int setup_nox2apic(char *str)
-{
-	disable_x2apic = 1;
-	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
-	return 0;
-}
-early_param("nox2apic", setup_nox2apic);
-#endif
-
-unsigned long mp_lapic_addr;
-int disable_apic;
-/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int disable_apic_timer __cpuinitdata;
-/* Local APIC timer works in C2 */
-int local_apic_timer_c2_ok;
-EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
-
-int first_system_vector = 0xfe;
-
-/*
- * Debug level, exported for io_apic.c
- */
-unsigned int apic_verbosity;
-
-int pic_mode;
-
-/* Have we found an MP table */
-int smp_found_config;
-
-static struct resource lapic_resource = {
-	.name = "Local APIC",
-	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
-static unsigned int calibration_result;
-
-static int lapic_next_event(unsigned long delta,
-			    struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
-			      struct clock_event_device *evt);
-static void lapic_timer_broadcast(const struct cpumask *mask);
-static void apic_pm_activate(void);
-
-/*
- * The local apic timer can be used for any function which is CPU local.
- */
-static struct clock_event_device lapic_clockevent = {
-	.name		= "lapic",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
-			| CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
-	.shift		= 32,
-	.set_mode	= lapic_timer_setup,
-	.set_next_event	= lapic_next_event,
-	.broadcast	= lapic_timer_broadcast,
-	.rating		= 100,
-	.irq		= -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
-static unsigned long apic_phys;
-
-/*
- * Get the LAPIC version
- */
-static inline int lapic_get_version(void)
-{
-	return GET_APIC_VERSION(apic_read(APIC_LVR));
-}
-
-/*
- * Check, if the APIC is integrated or a separate chip
- */
-static inline int lapic_is_integrated(void)
-{
-#ifdef CONFIG_X86_64
-	return 1;
-#else
-	return APIC_INTEGRATED(lapic_get_version());
-#endif
-}
-
-/*
- * Check, whether this is a modern or a first generation APIC
- */
-static int modern_apic(void)
-{
-	/* AMD systems use old APIC versions, so check the CPU */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86 >= 0xf)
-		return 1;
-	return lapic_get_version() >= 0x14;
-}
-
-void native_apic_wait_icr_idle(void)
-{
-	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
-		cpu_relax();
-}
-
-u32 native_safe_apic_wait_icr_idle(void)
-{
-	u32 send_status;
-	int timeout;
-
-	timeout = 0;
-	do {
-		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-		if (!send_status)
-			break;
-		udelay(100);
-	} while (timeout++ < 1000);
-
-	return send_status;
-}
-
-void native_apic_icr_write(u32 low, u32 id)
-{
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
-	apic_write(APIC_ICR, low);
-}
-
-u64 native_apic_icr_read(void)
-{
-	u32 icr1, icr2;
-
-	icr2 = apic_read(APIC_ICR2);
-	icr1 = apic_read(APIC_ICR);
-
-	return icr1 | ((u64)icr2 << 32);
-}
-
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void __cpuinit enable_NMI_through_LVT0(void)
-{
-	unsigned int v;
-
-	/* unmask and set to NMI */
-	v = APIC_DM_NMI;
-
-	/* Level triggered for 82489DX (32bit mode) */
-	if (!lapic_is_integrated())
-		v |= APIC_LVT_LEVEL_TRIGGER;
-
-	apic_write(APIC_LVT0, v);
-}
-
-#ifdef CONFIG_X86_32
-/**
- * get_physical_broadcast - Get number of physical broadcast IDs
- */
-int get_physical_broadcast(void)
-{
-	return modern_apic() ? 0xff : 0xf;
-}
-#endif
-
-/**
- * lapic_get_maxlvt - get the maximum number of local vector table entries
- */
-int lapic_get_maxlvt(void)
-{
-	unsigned int v;
-
-	v = apic_read(APIC_LVR);
-	/*
-	 * - we always have APIC integrated on 64bit mode
-	 * - 82489DXs do not report # of LVT entries
-	 */
-	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
-}
-
-/*
- * Local APIC timer
- */
-
-/* Clock divisor */
-#define APIC_DIVISOR 16
-
-/*
- * This function sets up the local APIC timer, with a timeout of
- * 'clocks' APIC bus clock. During calibration we actually call
- * this function twice on the boot CPU, once with a bogus timeout
- * value, second time for real. The other (noncalibrating) CPUs
- * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
- */
-static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
-{
-	unsigned int lvtt_value, tmp_value;
-
-	lvtt_value = LOCAL_TIMER_VECTOR;
-	if (!oneshot)
-		lvtt_value |= APIC_LVT_TIMER_PERIODIC;
-	if (!lapic_is_integrated())
-		lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
-
-	if (!irqen)
-		lvtt_value |= APIC_LVT_MASKED;
-
-	apic_write(APIC_LVTT, lvtt_value);
-
-	/*
-	 * Divide PICLK by 16
-	 */
-	tmp_value = apic_read(APIC_TDCR);
-	apic_write(APIC_TDCR,
-		(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
-		APIC_TDR_DIV_16);
-
-	if (!oneshot)
-		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
-}
-
-/*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- *
- * If mask=1, the LVT entry does not generate interrupts while mask=0
- * enables the vector. See also the BKDGs.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
-	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
-	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
-
-	apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
-	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
-	return APIC_EILVT_LVTOFF_IBS;
-}
-EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs);
-
-/*
- * Program the next event, relative to now
- */
-static int lapic_next_event(unsigned long delta,
-			    struct clock_event_device *evt)
-{
-	apic_write(APIC_TMICT, delta);
-	return 0;
-}
-
-/*
- * Setup the lapic timer in periodic or oneshot mode
- */
-static void lapic_timer_setup(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	unsigned long flags;
-	unsigned int v;
-
-	/* Lapic used as dummy for broadcast ? */
-	if (evt->features & CLOCK_EVT_FEAT_DUMMY)
-		return;
-
-	local_irq_save(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_ONESHOT:
-		__setup_APIC_LVTT(calibration_result,
-				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		v = apic_read(APIC_LVTT);
-		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write(APIC_LVTT, v);
-		apic_write(APIC_TMICT, 0xffffffff);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Nothing to do here */
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-/*
- * Local APIC timer broadcast function
- */
-static void lapic_timer_broadcast(const struct cpumask *mask)
-{
-#ifdef CONFIG_SMP
-	apic->send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
-#endif
-}
-
-/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
- * of the boot CPU and register the clock event in the framework.
- */
-static void __cpuinit setup_APIC_timer(void)
-{
-	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-
-	memcpy(levt, &lapic_clockevent, sizeof(*levt));
-	levt->cpumask = cpumask_of(smp_processor_id());
-
-	clockevents_register_device(levt);
-}
-
-/*
- * In this functions we calibrate APIC bus clocks to the external timer.
- *
- * We want to do the calibration only once since we want to have local timer
- * irqs syncron. CPUs connected by the same APIC bus have the very same bus
- * frequency.
- *
- * This was previously done by reading the PIT/HPET and waiting for a wrap
- * around to find out, that a tick has elapsed. I have a box, where the PIT
- * readout is broken, so it never gets out of the wait loop again. This was
- * also reported by others.
- *
- * Monitoring the jiffies value is inaccurate and the clockevents
- * infrastructure allows us to do a simple substitution of the interrupt
- * handler.
- *
- * The calibration routine also uses the pm_timer when possible, as the PIT
- * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes
- * back to normal later in the boot process).
- */
-
-#define LAPIC_CAL_LOOPS		(HZ/10)
-
-static __initdata int lapic_cal_loops = -1;
-static __initdata long lapic_cal_t1, lapic_cal_t2;
-static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2;
-static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2;
-static __initdata unsigned long lapic_cal_j1, lapic_cal_j2;
-
-/*
- * Temporary interrupt handler.
- */
-static void __init lapic_cal_handler(struct clock_event_device *dev)
-{
-	unsigned long long tsc = 0;
-	long tapic = apic_read(APIC_TMCCT);
-	unsigned long pm = acpi_pm_read_early();
-
-	if (cpu_has_tsc)
-		rdtscll(tsc);
-
-	switch (lapic_cal_loops++) {
-	case 0:
-		lapic_cal_t1 = tapic;
-		lapic_cal_tsc1 = tsc;
-		lapic_cal_pm1 = pm;
-		lapic_cal_j1 = jiffies;
-		break;
-
-	case LAPIC_CAL_LOOPS:
-		lapic_cal_t2 = tapic;
-		lapic_cal_tsc2 = tsc;
-		if (pm < lapic_cal_pm1)
-			pm += ACPI_PM_OVRRUN;
-		lapic_cal_pm2 = pm;
-		lapic_cal_j2 = jiffies;
-		break;
-	}
-}
-
-static int __init
-calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
-{
-	const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
-	const long pm_thresh = pm_100ms / 100;
-	unsigned long mult;
-	u64 res;
-
-#ifndef CONFIG_X86_PM_TIMER
-	return -1;
-#endif
-
-	apic_printk(APIC_VERBOSE, "... PM-Timer delta = %ld\n", deltapm);
-
-	/* Check, if the PM timer is available */
-	if (!deltapm)
-		return -1;
-
-	mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22);
-
-	if (deltapm > (pm_100ms - pm_thresh) &&
-	    deltapm < (pm_100ms + pm_thresh)) {
-		apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
-		return 0;
-	}
-
-	res = (((u64)deltapm) *  mult) >> 22;
-	do_div(res, 1000000);
-	pr_warning("APIC calibration not consistent "
-		   "with PM-Timer: %ldms instead of 100ms\n",(long)res);
-
-	/* Correct the lapic counter value */
-	res = (((u64)(*delta)) * pm_100ms);
-	do_div(res, deltapm);
-	pr_info("APIC delta adjusted to PM-Timer: "
-		"%lu (%ld)\n", (unsigned long)res, *delta);
-	*delta = (long)res;
-
-	/* Correct the tsc counter value */
-	if (cpu_has_tsc) {
-		res = (((u64)(*deltatsc)) * pm_100ms);
-		do_div(res, deltapm);
-		apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
-					  "PM-Timer: %lu (%ld) \n",
-					(unsigned long)res, *deltatsc);
-		*deltatsc = (long)res;
-	}
-
-	return 0;
-}
-
-static int __init calibrate_APIC_clock(void)
-{
-	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-	void (*real_handler)(struct clock_event_device *dev);
-	unsigned long deltaj;
-	long delta, deltatsc;
-	int pm_referenced = 0;
-
-	local_irq_disable();
-
-	/* Replace the global interrupt handler */
-	real_handler = global_clock_event->event_handler;
-	global_clock_event->event_handler = lapic_cal_handler;
-
-	/*
-	 * Setup the APIC counter to maximum. There is no way the lapic
-	 * can underflow in the 100ms detection time frame
-	 */
-	__setup_APIC_LVTT(0xffffffff, 0, 0);
-
-	/* Let the interrupts run */
-	local_irq_enable();
-
-	while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
-		cpu_relax();
-
-	local_irq_disable();
-
-	/* Restore the real event handler */
-	global_clock_event->event_handler = real_handler;
-
-	/* Build delta t1-t2 as apic timer counts down */
-	delta = lapic_cal_t1 - lapic_cal_t2;
-	apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
-
-	deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
-
-	/* we trust the PM based calibration if possible */
-	pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
-					&delta, &deltatsc);
-
-	/* Calculate the scaled math multiplication factor */
-	lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
-				       lapic_clockevent.shift);
-	lapic_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
-	lapic_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xF, &lapic_clockevent);
-
-	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
-
-	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
-	apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
-	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
-		    calibration_result);
-
-	if (cpu_has_tsc) {
-		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
-			    "%ld.%04ld MHz.\n",
-			    (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
-			    (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
-	}
-
-	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
-		    "%u.%04u MHz.\n",
-		    calibration_result / (1000000 / HZ),
-		    calibration_result % (1000000 / HZ));
-
-	/*
-	 * Do a sanity check on the APIC calibration result
-	 */
-	if (calibration_result < (1000000 / HZ)) {
-		local_irq_enable();
-		pr_warning("APIC frequency too slow, disabling apic timer\n");
-		return -1;
-	}
-
-	levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
-
-	/*
-	 * PM timer calibration failed or not turned on
-	 * so lets try APIC timer based calibration
-	 */
-	if (!pm_referenced) {
-		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
-
-		/*
-		 * Setup the apic timer manually
-		 */
-		levt->event_handler = lapic_cal_handler;
-		lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
-		lapic_cal_loops = -1;
-
-		/* Let the interrupts run */
-		local_irq_enable();
-
-		while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
-			cpu_relax();
-
-		/* Stop the lapic timer */
-		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
-
-		/* Jiffies delta */
-		deltaj = lapic_cal_j2 - lapic_cal_j1;
-		apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
-
-		/* Check, if the jiffies result is consistent */
-		if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
-			apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
-		else
-			levt->features |= CLOCK_EVT_FEAT_DUMMY;
-	} else
-		local_irq_enable();
-
-	if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
-		pr_warning("APIC timer disabled due to verification failure\n");
-			return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
-{
-	/*
-	 * The local apic timer can be disabled via the kernel
-	 * commandline or from the CPU detection code. Register the lapic
-	 * timer as a dummy clock event source on SMP systems, so the
-	 * broadcast mechanism is used. On UP systems simply ignore it.
-	 */
-	if (disable_apic_timer) {
-		pr_info("Disabling APIC timer\n");
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1) {
-			lapic_clockevent.mult = 1;
-			setup_APIC_timer();
-		}
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
-		    "calibrating APIC timer ...\n");
-
-	if (calibrate_APIC_clock()) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
-			setup_APIC_timer();
-		return;
-	}
-
-	/*
-	 * If nmi_watchdog is set to IO_APIC, we need the
-	 * PIT/HPET going.  Otherwise register lapic as a dummy
-	 * device.
-	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		pr_warning("APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
-
-	/* Setup the lapic or request the broadcast */
-	setup_APIC_timer();
-}
-
-void __cpuinit setup_secondary_APIC_clock(void)
-{
-	setup_APIC_timer();
-}
-
-/*
- * The guts of the apic timer interrupt
- */
-static void local_apic_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
-
-	/*
-	 * Normally we should not be here till LAPIC has been initialized but
-	 * in some cases like kdump, its possible that there is a pending LAPIC
-	 * timer interrupt from previous kernel's context and is delivered in
-	 * new kernel the moment interrupts are enabled.
-	 *
-	 * Interrupts are enabled early and LAPIC is setup much later, hence
-	 * its possible that when we get here evt->event_handler is NULL.
-	 * Check for event_handler being NULL and discard the interrupt as
-	 * spurious.
-	 */
-	if (!evt->event_handler) {
-		pr_warning("Spurious LAPIC timer interrupt on cpu %d\n", cpu);
-		/* Switch it off */
-		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
-		return;
-	}
-
-	/*
-	 * the NMI deadlock-detector uses this.
-	 */
-	inc_irq_stat(apic_timer_irqs);
-
-	evt->event_handler(evt);
-}
-
-/*
- * Local APIC timer interrupt. This is the most natural way for doing
- * local interrupts, but local timer interrupts can be emulated by
- * broadcast interrupts too. [in case the hw doesn't support APIC timers]
- *
- * [ if a single-CPU system runs an SMP kernel then we call the local
- *   interrupt as well. Thus we cannot inline the local irq ... ]
- */
-void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	/*
-	 * NOTE! We'd better ACK the irq immediately,
-	 * because timer handling can be slow.
-	 */
-	ack_APIC_irq();
-	/*
-	 * update_process_times() expects us to have done irq_enter().
-	 * Besides, if we don't timer interrupts ignore the global
-	 * interrupt lock, which is the WrongThing (tm) to do.
-	 */
-	exit_idle();
-	irq_enter();
-	local_apic_timer_interrupt();
-	irq_exit();
-
-	set_irq_regs(old_regs);
-}
-
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
-/*
- * Local APIC start and shutdown
- */
-
-/**
- * clear_local_APIC - shutdown the local APIC
- *
- * This is called, when a CPU is disabled and before rebooting, so the state of
- * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
- * leftovers during boot.
- */
-void clear_local_APIC(void)
-{
-	int maxlvt;
-	u32 v;
-
-	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
-		return;
-
-	maxlvt = lapic_get_maxlvt();
-	/*
-	 * Masking an LVT entry can trigger a local APIC error
-	 * if the vector is zero. Mask LVTERR first to prevent this.
-	 */
-	if (maxlvt >= 3) {
-		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
-	}
-	/*
-	 * Careful: we have to set masks only first to deassert
-	 * any level-triggered sources.
-	 */
-	v = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT1);
-	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
-	if (maxlvt >= 4) {
-		v = apic_read(APIC_LVTPC);
-		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
-	}
-
-	/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
-	if (maxlvt >= 5) {
-		v = apic_read(APIC_LVTTHMR);
-		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
-	}
-#endif
-	/*
-	 * Clean APIC state for other OSs:
-	 */
-	apic_write(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write(APIC_LVT1, APIC_LVT_MASKED);
-	if (maxlvt >= 3)
-		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-
-	/* Integrated APIC (!82489DX) ? */
-	if (lapic_is_integrated()) {
-		if (maxlvt > 3)
-			/* Clear ESR due to Pentium errata 3AP and 11AP */
-			apic_write(APIC_ESR, 0);
-		apic_read(APIC_ESR);
-	}
-}
-
-/**
- * disable_local_APIC - clear and disable the local APIC
- */
-void disable_local_APIC(void)
-{
-	unsigned int value;
-
-	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
-		return;
-
-	clear_local_APIC();
-
-	/*
-	 * Disable APIC (implies clearing of registers
-	 * for 82489DX!).
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write(APIC_SPIV, value);
-
-#ifdef CONFIG_X86_32
-	/*
-	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
-	 * restore the disabled state.
-	 */
-	if (enabled_via_apicbase) {
-		unsigned int l, h;
-
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_ENABLE;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-	}
-#endif
-}
-
-/*
- * If Linux enabled the LAPIC against the BIOS default disable it down before
- * re-entering the BIOS on shutdown.  Otherwise the BIOS may get confused and
- * not power-off.  Additionally clear all LVT entries before disable_local_APIC
- * for the case where Linux didn't enable the LAPIC.
- */
-void lapic_shutdown(void)
-{
-	unsigned long flags;
-
-	if (!cpu_has_apic)
-		return;
-
-	local_irq_save(flags);
-
-#ifdef CONFIG_X86_32
-	if (!enabled_via_apicbase)
-		clear_local_APIC();
-	else
-#endif
-		disable_local_APIC();
-
-
-	local_irq_restore(flags);
-}
-
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
-	unsigned int reg0, reg1;
-
-	/*
-	 * The version register is read-only in a real APIC.
-	 */
-	reg0 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
-	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
-	reg1 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
-	/*
-	 * The two version reads above should print the same
-	 * numbers.  If the second one is different, then we
-	 * poke at a non-APIC.
-	 */
-	if (reg1 != reg0)
-		return 0;
-
-	/*
-	 * Check if the version looks reasonably.
-	 */
-	reg1 = GET_APIC_VERSION(reg0);
-	if (reg1 == 0x00 || reg1 == 0xff)
-		return 0;
-	reg1 = lapic_get_maxlvt();
-	if (reg1 < 0x02 || reg1 == 0xff)
-		return 0;
-
-	/*
-	 * The ID register is read/write in a real APIC.
-	 */
-	reg0 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-	apic_write(APIC_ID, reg0 ^ apic->apic_id_mask);
-	reg1 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
-	apic_write(APIC_ID, reg0);
-	if (reg1 != (reg0 ^ apic->apic_id_mask))
-		return 0;
-
-	/*
-	 * The next two are just to see if we have sane values.
-	 * They're only really relevant if we're in Virtual Wire
-	 * compatibility mode, but most boxes are anymore.
-	 */
-	reg0 = apic_read(APIC_LVT0);
-	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
-	reg1 = apic_read(APIC_LVT1);
-	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
-	return 1;
-}
-
-/**
- * sync_Arb_IDs - synchronize APIC bus arbitration IDs
- */
-void __init sync_Arb_IDs(void)
-{
-	/*
-	 * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
-	 * needed on AMD.
-	 */
-	if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
-		return;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write(APIC_ICR, APIC_DEST_ALLINC |
-			APIC_INT_LEVELTRIG | APIC_DM_INIT);
-}
-
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
-	unsigned int value;
-
-	/*
-	 * Don't do the setup now if we have a SMP BIOS as the
-	 * through-I/O-APIC virtual wire mode might be active.
-	 */
-	if (smp_found_config || !cpu_has_apic)
-		return;
-
-	/*
-	 * Do not trust the local APIC being empty at bootup.
-	 */
-	clear_local_APIC();
-
-	/*
-	 * Enable APIC.
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-
-#ifdef CONFIG_X86_32
-	/* This bit is reserved on P4/Xeon and should be cleared */
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    (boot_cpu_data.x86 == 15))
-		value &= ~APIC_SPIV_FOCUS_DISABLED;
-	else
-#endif
-		value |= APIC_SPIV_FOCUS_DISABLED;
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up the virtual wire mode.
-	 */
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-	value = APIC_DM_NMI;
-	if (!lapic_is_integrated())		/* 82489DX */
-		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write(APIC_LVT1, value);
-}
-
-static void __cpuinit lapic_setup_esr(void)
-{
-	unsigned int oldvalue, value, maxlvt;
-
-	if (!lapic_is_integrated()) {
-		pr_info("No ESR for 82489DX.\n");
-		return;
-	}
-
-	if (apic->disable_esr) {
-		/*
-		 * Something untraceable is creating bad interrupts on
-		 * secondary quads ... for the moment, just leave the
-		 * ESR disabled - we can't do anything useful with the
-		 * errors anyway - mbligh
-		 */
-		pr_info("Leaving ESR disabled.\n");
-		return;
-	}
-
-	maxlvt = lapic_get_maxlvt();
-	if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
-		apic_write(APIC_ESR, 0);
-	oldvalue = apic_read(APIC_ESR);
-
-	/* enables sending errors */
-	value = ERROR_APIC_VECTOR;
-	apic_write(APIC_LVTERR, value);
-
-	/*
-	 * spec says clear errors after enabling vector.
-	 */
-	if (maxlvt > 3)
-		apic_write(APIC_ESR, 0);
-	value = apic_read(APIC_ESR);
-	if (value != oldvalue)
-		apic_printk(APIC_VERBOSE, "ESR value before enabling "
-			"vector: 0x%08x  after: 0x%08x\n",
-			oldvalue, value);
-}
-
-
-/**
- * setup_local_APIC - setup the local APIC
- */
-void __cpuinit setup_local_APIC(void)
-{
-	unsigned int value;
-	int i, j;
-
-	if (disable_apic) {
-		arch_disable_smp_support();
-		return;
-	}
-
-#ifdef CONFIG_X86_32
-	/* Pound the ESR really hard over the head with a big hammer - mbligh */
-	if (lapic_is_integrated() && apic->disable_esr) {
-		apic_write(APIC_ESR, 0);
-		apic_write(APIC_ESR, 0);
-		apic_write(APIC_ESR, 0);
-		apic_write(APIC_ESR, 0);
-	}
-#endif
-
-	preempt_disable();
-
-	/*
-	 * Double-check whether this APIC is really registered.
-	 * This is meaningless in clustered apic mode, so we skip it.
-	 */
-	if (!apic->apic_id_registered())
-		BUG();
-
-	/*
-	 * Intel recommends to set DFR, LDR and TPR before enabling
-	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
-	 * document number 292116).  So here it goes...
-	 */
-	apic->init_apic_ldr();
-
-	/*
-	 * Set Task Priority to 'accept all'. We never change this
-	 * later on.
-	 */
-	value = apic_read(APIC_TASKPRI);
-	value &= ~APIC_TPRI_MASK;
-	apic_write(APIC_TASKPRI, value);
-
-	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
-	 */
-	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-		value = apic_read(APIC_ISR + i*0x10);
-		for (j = 31; j >= 0; j--) {
-			if (value & (1<<j))
-				ack_APIC_irq();
-		}
-	}
-
-	/*
-	 * Now that we are all set up, enable the APIC
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	/*
-	 * Enable APIC
-	 */
-	value |= APIC_SPIV_APIC_ENABLED;
-
-#ifdef CONFIG_X86_32
-	/*
-	 * Some unknown Intel IO/APIC (or APIC) errata is biting us with
-	 * certain networking cards. If high frequency interrupts are
-	 * happening on a particular IOAPIC pin, plus the IOAPIC routing
-	 * entry is masked/unmasked at a high rate as well then sooner or
-	 * later IOAPIC line gets 'stuck', no more interrupts are received
-	 * from the device. If focus CPU is disabled then the hang goes
-	 * away, oh well :-(
-	 *
-	 * [ This bug can be reproduced easily with a level-triggered
-	 *   PCI Ne2000 networking cards and PII/PIII processors, dual
-	 *   BX chipset. ]
-	 */
-	/*
-	 * Actually disabling the focus CPU check just makes the hang less
-	 * frequent as it makes the interrupt distributon model be more
-	 * like LRU than MRU (the short-term load is more even across CPUs).
-	 * See also the comment in end_level_ioapic_irq().  --macro
-	 */
-
-	/*
-	 * - enable focus processor (bit==0)
-	 * - 64bit mode always use processor focus
-	 *   so no need to set it
-	 */
-	value &= ~APIC_SPIV_FOCUS_DISABLED;
-#endif
-
-	/*
-	 * Set spurious IRQ vector
-	 */
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up LVT0, LVT1:
-	 *
-	 * set up through-local-APIC on the BP's LINT0. This is not
-	 * strictly necessary in pure symmetric-IO mode, but sometimes
-	 * we delegate interrupts to the 8259A.
-	 */
-	/*
-	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
-	 */
-	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
-	if (!smp_processor_id() && (pic_mode || !value)) {
-		value = APIC_DM_EXTINT;
-		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
-				smp_processor_id());
-	} else {
-		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
-		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
-				smp_processor_id());
-	}
-	apic_write(APIC_LVT0, value);
-
-	/*
-	 * only the BP should see the LINT1 NMI signal, obviously.
-	 */
-	if (!smp_processor_id())
-		value = APIC_DM_NMI;
-	else
-		value = APIC_DM_NMI | APIC_LVT_MASKED;
-	if (!lapic_is_integrated())		/* 82489DX */
-		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write(APIC_LVT1, value);
-
-	preempt_enable();
-}
-
-void __cpuinit end_local_APIC_setup(void)
-{
-	lapic_setup_esr();
-
-#ifdef CONFIG_X86_32
-	{
-		unsigned int value;
-		/* Disable the local apic timer */
-		value = apic_read(APIC_LVTT);
-		value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write(APIC_LVTT, value);
-	}
-#endif
-
-	setup_apic_nmi_watchdog(NULL);
-	apic_pm_activate();
-}
-
-#ifdef CONFIG_X86_X2APIC
-void check_x2apic(void)
-{
-	int msr, msr2;
-
-	if (!cpu_has_x2apic)
-		return;
-
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
-
-	if (msr & X2APIC_ENABLE) {
-		pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
-		x2apic_preenabled = x2apic = 1;
-	}
-}
-
-void enable_x2apic(void)
-{
-	int msr, msr2;
-
-	if (!x2apic)
-		return;
-
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
-	if (!(msr & X2APIC_ENABLE)) {
-		pr_info("Enabling x2apic\n");
-		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
-	}
-}
-
-void __init enable_IR_x2apic(void)
-{
-#ifdef CONFIG_INTR_REMAP
-	int ret;
-	unsigned long flags;
-
-	if (!cpu_has_x2apic)
-		return;
-
-	if (!x2apic_preenabled && disable_x2apic) {
-		pr_info("Skipped enabling x2apic and Interrupt-remapping "
-			"because of nox2apic\n");
-		return;
-	}
-
-	if (x2apic_preenabled && disable_x2apic)
-		panic("Bios already enabled x2apic, can't enforce nox2apic");
-
-	if (!x2apic_preenabled && skip_ioapic_setup) {
-		pr_info("Skipped enabling x2apic and Interrupt-remapping "
-			"because of skipping io-apic setup\n");
-		return;
-	}
-
-	ret = dmar_table_init();
-	if (ret) {
-		pr_info("dmar_table_init() failed with %d:\n", ret);
-
-		if (x2apic_preenabled)
-			panic("x2apic enabled by bios. But IR enabling failed");
-		else
-			pr_info("Not enabling x2apic,Intr-remapping\n");
-		return;
-	}
-
-	local_irq_save(flags);
-	mask_8259A();
-
-	ret = save_mask_IO_APIC_setup();
-	if (ret) {
-		pr_info("Saving IO-APIC state failed: %d\n", ret);
-		goto end;
-	}
-
-	ret = enable_intr_remapping(1);
-
-	if (ret && x2apic_preenabled) {
-		local_irq_restore(flags);
-		panic("x2apic enabled by bios. But IR enabling failed");
-	}
-
-	if (ret)
-		goto end_restore;
-
-	if (!x2apic) {
-		x2apic = 1;
-		enable_x2apic();
-	}
-
-end_restore:
-	if (ret)
-		/*
-		 * IR enabling failed
-		 */
-		restore_IO_APIC_setup();
-	else
-		reinit_intr_remapped_IO_APIC(x2apic_preenabled);
-
-end:
-	unmask_8259A();
-	local_irq_restore(flags);
-
-	if (!ret) {
-		if (!x2apic_preenabled)
-			pr_info("Enabled x2apic and interrupt-remapping\n");
-		else
-			pr_info("Enabled Interrupt-remapping\n");
-	} else
-		pr_err("Failed to enable Interrupt-remapping and x2apic\n");
-#else
-	if (!cpu_has_x2apic)
-		return;
-
-	if (x2apic_preenabled)
-		panic("x2apic enabled prior OS handover,"
-		      " enable CONFIG_INTR_REMAP");
-
-	pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
-		" and x2apic\n");
-#endif
-
-	return;
-}
-#endif /* CONFIG_X86_X2APIC */
-
-#ifdef CONFIG_X86_64
-/*
- * Detect and enable local APICs on non-SMP boards.
- * Original code written by Keir Fraser.
- * On AMD64 we trust the BIOS - if it says no APIC it is likely
- * not correctly set up (usually the APIC timer won't work etc.)
- */
-static int __init detect_init_APIC(void)
-{
-	if (!cpu_has_apic) {
-		pr_info("No local APIC present\n");
-		return -1;
-	}
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-	boot_cpu_physical_apicid = 0;
-	return 0;
-}
-#else
-/*
- * Detect and initialize APIC
- */
-static int __init detect_init_APIC(void)
-{
-	u32 h, l, features;
-
-	/* Disabled by kernel option? */
-	if (disable_apic)
-		return -1;
-
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
-		    (boot_cpu_data.x86 >= 15))
-			break;
-		goto no_apic;
-	case X86_VENDOR_INTEL:
-		if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
-		    (boot_cpu_data.x86 == 5 && cpu_has_apic))
-			break;
-		goto no_apic;
-	default:
-		goto no_apic;
-	}
-
-	if (!cpu_has_apic) {
-		/*
-		 * Over-ride BIOS and try to enable the local APIC only if
-		 * "lapic" specified.
-		 */
-		if (!force_enable_local_apic) {
-			pr_info("Local APIC disabled by BIOS -- "
-				"you can enable it with \"lapic\"\n");
-			return -1;
-		}
-		/*
-		 * Some BIOSes disable the local APIC in the APIC_BASE
-		 * MSR. This can only be done in software for Intel P6 or later
-		 * and AMD K7 (Model > 1) or later.
-		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-			l &= ~MSR_IA32_APICBASE_BASE;
-			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
-			wrmsr(MSR_IA32_APICBASE, l, h);
-			enabled_via_apicbase = 1;
-		}
-	}
-	/*
-	 * The APIC feature bit should now be enabled
-	 * in `cpuid'
-	 */
-	features = cpuid_edx(1);
-	if (!(features & (1 << X86_FEATURE_APIC))) {
-		pr_warning("Could not enable APIC!\n");
-		return -1;
-	}
-	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
-
-	pr_info("Found and enabled local APIC!\n");
-
-	apic_pm_activate();
-
-	return 0;
-
-no_apic:
-	pr_info("No local APIC present or hardware disabled\n");
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_X86_64
-void __init early_init_lapic_mapping(void)
-{
-	unsigned long phys_addr;
-
-	/*
-	 * If no local APIC can be found then go out
-	 * : it means there is no mpatable and MADT
-	 */
-	if (!smp_found_config)
-		return;
-
-	phys_addr = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
-	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-		    APIC_BASE, phys_addr);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	boot_cpu_physical_apicid = read_apic_id();
-}
-#endif
-
-/**
- * init_apic_mappings - initialize APIC mappings
- */
-void __init init_apic_mappings(void)
-{
-#ifdef CONFIG_X86_X2APIC
-	if (x2apic) {
-		boot_cpu_physical_apicid = read_apic_id();
-		return;
-	}
-#endif
-
-	/*
-	 * If no local APIC can be found then set up a fake all
-	 * zeroes page to simulate the local APIC and another
-	 * one for the IO-APIC.
-	 */
-	if (!smp_found_config && detect_init_APIC()) {
-		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
-		apic_phys = __pa(apic_phys);
-	} else
-		apic_phys = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-	apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
-				APIC_BASE, apic_phys);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = read_apic_id();
-}
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int apic_version[MAX_APICS];
-
-int __init APIC_init_uniprocessor(void)
-{
-	if (disable_apic) {
-		pr_info("Apic disabled\n");
-		return -1;
-	}
-#ifdef CONFIG_X86_64
-	if (!cpu_has_apic) {
-		disable_apic = 1;
-		pr_info("Apic disabled by BIOS\n");
-		return -1;
-	}
-#else
-	if (!smp_found_config && !cpu_has_apic)
-		return -1;
-
-	/*
-	 * Complain if the BIOS pretends there is one.
-	 */
-	if (!cpu_has_apic &&
-	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
-		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
-			boot_cpu_physical_apicid);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-		return -1;
-	}
-#endif
-
-	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
-	default_setup_apic_routing();
-#endif
-
-	verify_local_APIC();
-	connect_bsp_APIC();
-
-#ifdef CONFIG_X86_64
-	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
-#else
-	/*
-	 * Hack: In case of kdump, after a crash, kernel might be booting
-	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
-	 * might be zero if read from MP tables. Get it from LAPIC.
-	 */
-# ifdef CONFIG_CRASH_DUMP
-	boot_cpu_physical_apicid = read_apic_id();
-# endif
-#endif
-	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
-	setup_local_APIC();
-
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Now enable IO-APICs, actually call clear_IO_APIC
-	 * We need clear_IO_APIC before enabling error vector
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		enable_IO_APIC();
-#endif
-
-	end_local_APIC_setup();
-
-#ifdef CONFIG_X86_IO_APIC
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else {
-		nr_ioapics = 0;
-		localise_nmi_watchdog();
-	}
-#else
-	localise_nmi_watchdog();
-#endif
-
-	setup_boot_clock();
-#ifdef CONFIG_X86_64
-	check_nmi_watchdog();
-#endif
-
-	return 0;
-}
-
-/*
- * Local APIC interrupts
- */
-
-/*
- * This interrupt should _never_ happen with our APIC/SMP architecture
- */
-void smp_spurious_interrupt(struct pt_regs *regs)
-{
-	u32 v;
-
-	exit_idle();
-	irq_enter();
-	/*
-	 * Check if this really is a spurious interrupt and ACK it
-	 * if it is a vectored one.  Just in case...
-	 * Spurious interrupts should not be ACKed.
-	 */
-	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
-	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
-		ack_APIC_irq();
-
-	inc_irq_stat(irq_spurious_count);
-
-	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
-	pr_info("spurious APIC interrupt on CPU#%d, "
-		"should never happen.\n", smp_processor_id());
-	irq_exit();
-}
-
-/*
- * This interrupt should never happen with our APIC/SMP architecture
- */
-void smp_error_interrupt(struct pt_regs *regs)
-{
-	u32 v, v1;
-
-	exit_idle();
-	irq_enter();
-	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
-	apic_write(APIC_ESR, 0);
-	v1 = apic_read(APIC_ESR);
-	ack_APIC_irq();
-	atomic_inc(&irq_err_count);
-
-	/*
-	 * Here is what the APIC error bits mean:
-	 * 0: Send CS error
-	 * 1: Receive CS error
-	 * 2: Send accept error
-	 * 3: Receive accept error
-	 * 4: Reserved
-	 * 5: Send illegal vector
-	 * 6: Received illegal vector
-	 * 7: Illegal register address
-	 */
-	pr_debug("APIC error on CPU%d: %02x(%02x)\n",
-		smp_processor_id(), v , v1);
-	irq_exit();
-}
-
-/**
- * connect_bsp_APIC - attach the APIC to the interrupt system
- */
-void __init connect_bsp_APIC(void)
-{
-#ifdef CONFIG_X86_32
-	if (pic_mode) {
-		/*
-		 * Do not trust the local APIC being empty at bootup.
-		 */
-		clear_local_APIC();
-		/*
-		 * PIC mode, enable APIC mode in the IMCR, i.e.  connect BSP's
-		 * local APIC to INT and NMI lines.
-		 */
-		apic_printk(APIC_VERBOSE, "leaving PIC mode, "
-				"enabling APIC mode.\n");
-		outb(0x70, 0x22);
-		outb(0x01, 0x23);
-	}
-#endif
-	if (apic->enable_apic_mode)
-		apic->enable_apic_mode();
-}
-
-/**
- * disconnect_bsp_APIC - detach the APIC from the interrupt system
- * @virt_wire_setup:	indicates, whether virtual wire mode is selected
- *
- * Virtual wire mode is necessary to deliver legacy interrupts even when the
- * APIC is disabled.
- */
-void disconnect_bsp_APIC(int virt_wire_setup)
-{
-	unsigned int value;
-
-#ifdef CONFIG_X86_32
-	if (pic_mode) {
-		/*
-		 * Put the board back into PIC mode (has an effect only on
-		 * certain older boards).  Note that APIC interrupts, including
-		 * IPIs, won't work beyond this point!  The only exception are
-		 * INIT IPIs.
-		 */
-		apic_printk(APIC_VERBOSE, "disabling APIC mode, "
-				"entering PIC mode.\n");
-		outb(0x70, 0x22);
-		outb(0x00, 0x23);
-		return;
-	}
-#endif
-
-	/* Go back to Virtual Wire compatibility mode */
-
-	/* For the spurious interrupt use vector F, and enable it */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-	value |= 0xf;
-	apic_write(APIC_SPIV, value);
-
-	if (!virt_wire_setup) {
-		/*
-		 * For LVT0 make it edge triggered, active high,
-		 * external and enabled
-		 */
-		value = apic_read(APIC_LVT0);
-		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-		apic_write(APIC_LVT0, value);
-	} else {
-		/* Disable LVT0 */
-		apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	}
-
-	/*
-	 * For LVT1 make it edge triggered, active high,
-	 * nmi and enabled
-	 */
-	value = apic_read(APIC_LVT1);
-	value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-	value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-	value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-	apic_write(APIC_LVT1, value);
-}
-
-void __cpuinit generic_processor_info(int apicid, int version)
-{
-	int cpu;
-
-	/*
-	 * Validate version
-	 */
-	if (version == 0x0) {
-		pr_warning("BIOS bug, APIC version is 0 for CPU#%d! "
-			   "fixing up to 0x10. (tell your hw vendor)\n",
-				version);
-		version = 0x10;
-	}
-	apic_version[apicid] = version;
-
-	if (num_processors >= nr_cpu_ids) {
-		int max = nr_cpu_ids;
-		int thiscpu = max + disabled_cpus;
-
-		pr_warning(
-			"ACPI: NR_CPUS/possible_cpus limit of %i reached."
-			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
-
-		disabled_cpus++;
-		return;
-	}
-
-	num_processors++;
-	cpu = cpumask_next_zero(-1, cpu_present_mask);
-
-	if (version != apic_version[boot_cpu_physical_apicid])
-		WARN_ONCE(1,
-			"ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
-			apic_version[boot_cpu_physical_apicid], cpu, version);
-
-	physid_set(apicid, phys_cpu_present_map);
-	if (apicid == boot_cpu_physical_apicid) {
-		/*
-		 * x86_bios_cpu_apicid is required to have processors listed
-		 * in same order as logical cpu numbers. Hence the first
-		 * entry is BSP, and so on.
-		 */
-		cpu = 0;
-	}
-	if (apicid > max_physical_apicid)
-		max_physical_apicid = apicid;
-
-#ifdef CONFIG_X86_32
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (max_physical_apicid >= 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-#endif
-
-#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
-	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
-#endif
-
-	set_cpu_possible(cpu, true);
-	set_cpu_present(cpu, true);
-}
-
-int hard_smp_processor_id(void)
-{
-	return read_apic_id();
-}
-
-void default_init_apic_ldr(void)
-{
-	unsigned long val;
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write(APIC_LDR, val);
-}
-
-#ifdef CONFIG_X86_32
-int default_apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-#endif
-
-/*
- * Power management
- */
-#ifdef CONFIG_PM
-
-static struct {
-	/*
-	 * 'active' is true if the local APIC was enabled by us and
-	 * not the BIOS; this signifies that we are also responsible
-	 * for disabling it before entering apm/acpi suspend
-	 */
-	int active;
-	/* r/w apic fields */
-	unsigned int apic_id;
-	unsigned int apic_taskpri;
-	unsigned int apic_ldr;
-	unsigned int apic_dfr;
-	unsigned int apic_spiv;
-	unsigned int apic_lvtt;
-	unsigned int apic_lvtpc;
-	unsigned int apic_lvt0;
-	unsigned int apic_lvt1;
-	unsigned int apic_lvterr;
-	unsigned int apic_tmict;
-	unsigned int apic_tdcr;
-	unsigned int apic_thmr;
-} apic_pm_state;
-
-static int lapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = lapic_get_maxlvt();
-
-	apic_pm_state.apic_id = apic_read(APIC_ID);
-	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
-	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
-	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
-	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
-	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
-	if (maxlvt >= 4)
-		apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
-	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
-	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
-	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
-	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
-	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
-	if (maxlvt >= 5)
-		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
-#endif
-
-	local_irq_save(flags);
-	disable_local_APIC();
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int lapic_resume(struct sys_device *dev)
-{
-	unsigned int l, h;
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = lapic_get_maxlvt();
-
-	local_irq_save(flags);
-
-#ifdef CONFIG_X86_X2APIC
-	if (x2apic)
-		enable_x2apic();
-	else
-#endif
-	{
-		/*
-		 * Make sure the APICBASE points to the right address
-		 *
-		 * FIXME! This will be wrong if we ever support suspend on
-		 * SMP! We'll need to do this as part of the CPU restore!
-		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-	}
-
-	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
-	apic_write(APIC_ID, apic_pm_state.apic_id);
-	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
-	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
-	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
-	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
-	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
-	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
-	if (maxlvt >= 5)
-		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
-#endif
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
-	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
-	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
-	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/*
- * This device has no shutdown method - fully functioning local APICs
- * are needed on every CPU up until machine_halt/restart/poweroff.
- */
-
-static struct sysdev_class lapic_sysclass = {
-	.name		= "lapic",
-	.resume		= lapic_resume,
-	.suspend	= lapic_suspend,
-};
-
-static struct sys_device device_lapic = {
-	.id	= 0,
-	.cls	= &lapic_sysclass,
-};
-
-static void __cpuinit apic_pm_activate(void)
-{
-	apic_pm_state.active = 1;
-}
-
-static int __init init_lapic_sysfs(void)
-{
-	int error;
-
-	if (!cpu_has_apic)
-		return 0;
-	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-
-	error = sysdev_class_register(&lapic_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic);
-	return error;
-}
-device_initcall(init_lapic_sysfs);
-
-#else	/* CONFIG_PM */
-
-static void apic_pm_activate(void) { }
-
-#endif	/* CONFIG_PM */
-
-#ifdef CONFIG_X86_64
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
-{
-	int i, clusters, zeros;
-	unsigned id;
-	u16 *bios_cpu_apicid;
-	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
-
-	/*
-	 * there is not this kind of box with AMD CPU yet.
-	 * Some AMD box with quadcore cpu and 8 sockets apicid
-	 * will be [4, 0x23] or [8, 0x27] could be thought to
-	 * vsmp box still need checking...
-	 */
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
-		return 0;
-
-	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
-
-	for (i = 0; i < nr_cpu_ids; i++) {
-		/* are we being called early in kernel startup? */
-		if (bios_cpu_apicid) {
-			id = bios_cpu_apicid[i];
-		} else if (i < nr_cpu_ids) {
-			if (cpu_present(i))
-				id = per_cpu(x86_bios_cpu_apicid, i);
-			else
-				continue;
-		} else
-			break;
-
-		if (id != BAD_APICID)
-			__set_bit(APIC_CLUSTERID(id), clustermap);
-	}
-
-	/* Problem:  Partially populated chassis may not have CPUs in some of
-	 * the APIC clusters they have been allocated.  Only present CPUs have
-	 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
-	 * Since clusters are allocated sequentially, count zeros only if
-	 * they are bounded by ones.
-	 */
-	clusters = 0;
-	zeros = 0;
-	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
-		if (test_bit(i, clustermap)) {
-			clusters += 1 + zeros;
-			zeros = 0;
-		} else
-			++zeros;
-	}
-
-	/* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
-	 * not guaranteed to be synced between boards
-	 */
-	if (is_vsmp_box() && clusters > 1)
-		return 1;
-
-	/*
-	 * If clusters > 2, then should be multi-chassis.
-	 * May have to revisit this when multi-core + hyperthreaded CPUs come
-	 * out, but AFAIK this will work even for them.
-	 */
-	return (clusters > 2);
-}
-#endif
-
-/*
- * APIC command line parameters
- */
-static int __init setup_disableapic(char *arg)
-{
-	disable_apic = 1;
-	setup_clear_cpu_cap(X86_FEATURE_APIC);
-	return 0;
-}
-early_param("disableapic", setup_disableapic);
-
-/* same as disableapic, for compatibility */
-static int __init setup_nolapic(char *arg)
-{
-	return setup_disableapic(arg);
-}
-early_param("nolapic", setup_nolapic);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
-	local_apic_timer_c2_ok = 1;
-	return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static int __init parse_disable_apic_timer(char *arg)
-{
-	disable_apic_timer = 1;
-	return 0;
-}
-early_param("noapictimer", parse_disable_apic_timer);
-
-static int __init parse_nolapic_timer(char *arg)
-{
-	disable_apic_timer = 1;
-	return 0;
-}
-early_param("nolapic_timer", parse_nolapic_timer);
-
-static int __init apic_set_verbosity(char *arg)
-{
-	if (!arg)  {
-#ifdef CONFIG_X86_64
-		skip_ioapic_setup = 0;
-		return 0;
-#endif
-		return -EINVAL;
-	}
-
-	if (strcmp("debug", arg) == 0)
-		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", arg) == 0)
-		apic_verbosity = APIC_VERBOSE;
-	else {
-		pr_warning("APIC Verbosity level %s not recognised"
-			" use apic=verbose or apic=debug\n", arg);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-early_param("apic", apic_set_verbosity);
-
-static int __init lapic_insert_resource(void)
-{
-	if (!apic_phys)
-		return -1;
-
-	/* Put local APIC into the resource map. */
-	lapic_resource.start = apic_phys;
-	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
-	insert_resource(&iomem_resource, &lapic_resource);
-
-	return 0;
-}
-
-/*
- * need call insert after e820_reserve_resources()
- * that is using request_resource
- */
-late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
new file mode 100644
index 00000000000..da20b70c400
--- /dev/null
+++ b/arch/x86/kernel/apic/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for local APIC drivers and for the IO-APIC code
+#
+
+obj-y				:= apic.o ipi.o nmi.o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
+obj-$(CONFIG_SMP)		+= ipi.o
+
+ifeq ($(CONFIG_X86_64),y)
+obj-y				+= apic_64.o apic_flat_64.o
+obj-$(CONFIG_X86_X2APIC)	+= x2apic_cluster.o
+obj-$(CONFIG_X86_X2APIC)	+= x2apic_phys.o
+obj-$(CONFIG_X86_UV)		+= x2apic_uv_x.o
+endif
+
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
new file mode 100644
index 00000000000..c12823eb55b
--- /dev/null
+++ b/arch/x86/kernel/apic/apic.c
@@ -0,0 +1,2212 @@
+/*
+ *	Local APIC handling, local APIC timers
+ *
+ *	(c) 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
+ *					thanks to Eric Gilmore
+ *					and Rolf G. Tews
+ *					for testing these extensively.
+ *	Maciej W. Rozycki	:	Various updates and fixes.
+ *	Mikael Pettersson	:	Power Management for UP-APIC.
+ *	Pavel Machek and
+ *	Mikael Pettersson	:	PM converted to driver model.
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/ftrace.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/dmar.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/dmi.h>
+#include <linux/nmi.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+
+#include <asm/arch_hooks.h>
+#include <asm/pgalloc.h>
+#include <asm/atomic.h>
+#include <asm/mpspec.h>
+#include <asm/i8253.h>
+#include <asm/i8259.h>
+#include <asm/proto.h>
+#include <asm/apic.h>
+#include <asm/desc.h>
+#include <asm/hpet.h>
+#include <asm/idle.h>
+#include <asm/mtrr.h>
+#include <asm/smp.h>
+
+unsigned int num_processors;
+
+unsigned disabled_cpus __cpuinitdata;
+
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+
+/*
+ * The highest APIC ID seen during enumeration.
+ *
+ * This determines the messaging protocol we can use: if all APIC IDs
+ * are in the 0 ... 7 range, then we can use logical addressing which
+ * has some performance advantages (better broadcasting).
+ *
+ * If there's an APIC ID above 8, we use physical addressing.
+ */
+unsigned int max_physical_apicid;
+
+/*
+ * Bitmask of physically existing CPUs:
+ */
+physid_mask_t phys_cpu_present_map;
+
+/*
+ * Map cpu index to physical APIC ID
+ */
+DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
+DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
+#ifdef CONFIG_X86_32
+/*
+ * Knob to control our willingness to enable the local APIC.
+ *
+ * +1=force-enable
+ */
+static int force_enable_local_apic;
+/*
+ * APIC command line parameters
+ */
+static int __init parse_lapic(char *arg)
+{
+	force_enable_local_apic = 1;
+	return 0;
+}
+early_param("lapic", parse_lapic);
+/* Local APIC was disabled by the BIOS and enabled by the kernel */
+static int enabled_via_apicbase;
+
+#endif
+
+#ifdef CONFIG_X86_64
+static int apic_calibrate_pmtmr __initdata;
+static __init int setup_apicpmtimer(char *s)
+{
+	apic_calibrate_pmtmr = 1;
+	notsc_setup(NULL);
+	return 0;
+}
+__setup("apicpmtimer", setup_apicpmtimer);
+#endif
+
+#ifdef CONFIG_X86_X2APIC
+int x2apic;
+/* x2apic enabled before OS handover */
+static int x2apic_preenabled;
+static int disable_x2apic;
+static __init int setup_nox2apic(char *str)
+{
+	disable_x2apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+	return 0;
+}
+early_param("nox2apic", setup_nox2apic);
+#endif
+
+unsigned long mp_lapic_addr;
+int disable_apic;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int disable_apic_timer __cpuinitdata;
+/* Local APIC timer works in C2 */
+int local_apic_timer_c2_ok;
+EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
+
+int first_system_vector = 0xfe;
+
+/*
+ * Debug level, exported for io_apic.c
+ */
+unsigned int apic_verbosity;
+
+int pic_mode;
+
+/* Have we found an MP table */
+int smp_found_config;
+
+static struct resource lapic_resource = {
+	.name = "Local APIC",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
+static unsigned int calibration_result;
+
+static int lapic_next_event(unsigned long delta,
+			    struct clock_event_device *evt);
+static void lapic_timer_setup(enum clock_event_mode mode,
+			      struct clock_event_device *evt);
+static void lapic_timer_broadcast(const struct cpumask *mask);
+static void apic_pm_activate(void);
+
+/*
+ * The local apic timer can be used for any function which is CPU local.
+ */
+static struct clock_event_device lapic_clockevent = {
+	.name		= "lapic",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
+			| CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
+	.shift		= 32,
+	.set_mode	= lapic_timer_setup,
+	.set_next_event	= lapic_next_event,
+	.broadcast	= lapic_timer_broadcast,
+	.rating		= 100,
+	.irq		= -1,
+};
+static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
+
+static unsigned long apic_phys;
+
+/*
+ * Get the LAPIC version
+ */
+static inline int lapic_get_version(void)
+{
+	return GET_APIC_VERSION(apic_read(APIC_LVR));
+}
+
+/*
+ * Check, if the APIC is integrated or a separate chip
+ */
+static inline int lapic_is_integrated(void)
+{
+#ifdef CONFIG_X86_64
+	return 1;
+#else
+	return APIC_INTEGRATED(lapic_get_version());
+#endif
+}
+
+/*
+ * Check, whether this is a modern or a first generation APIC
+ */
+static int modern_apic(void)
+{
+	/* AMD systems use old APIC versions, so check the CPU */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86 >= 0xf)
+		return 1;
+	return lapic_get_version() >= 0x14;
+}
+
+void native_apic_wait_icr_idle(void)
+{
+	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
+		cpu_relax();
+}
+
+u32 native_safe_apic_wait_icr_idle(void)
+{
+	u32 send_status;
+	int timeout;
+
+	timeout = 0;
+	do {
+		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+		if (!send_status)
+			break;
+		udelay(100);
+	} while (timeout++ < 1000);
+
+	return send_status;
+}
+
+void native_apic_icr_write(u32 low, u32 id)
+{
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+	apic_write(APIC_ICR, low);
+}
+
+u64 native_apic_icr_read(void)
+{
+	u32 icr1, icr2;
+
+	icr2 = apic_read(APIC_ICR2);
+	icr1 = apic_read(APIC_ICR);
+
+	return icr1 | ((u64)icr2 << 32);
+}
+
+/**
+ * enable_NMI_through_LVT0 - enable NMI through local vector table 0
+ */
+void __cpuinit enable_NMI_through_LVT0(void)
+{
+	unsigned int v;
+
+	/* unmask and set to NMI */
+	v = APIC_DM_NMI;
+
+	/* Level triggered for 82489DX (32bit mode) */
+	if (!lapic_is_integrated())
+		v |= APIC_LVT_LEVEL_TRIGGER;
+
+	apic_write(APIC_LVT0, v);
+}
+
+#ifdef CONFIG_X86_32
+/**
+ * get_physical_broadcast - Get number of physical broadcast IDs
+ */
+int get_physical_broadcast(void)
+{
+	return modern_apic() ? 0xff : 0xf;
+}
+#endif
+
+/**
+ * lapic_get_maxlvt - get the maximum number of local vector table entries
+ */
+int lapic_get_maxlvt(void)
+{
+	unsigned int v;
+
+	v = apic_read(APIC_LVR);
+	/*
+	 * - we always have APIC integrated on 64bit mode
+	 * - 82489DXs do not report # of LVT entries
+	 */
+	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
+}
+
+/*
+ * Local APIC timer
+ */
+
+/* Clock divisor */
+#define APIC_DIVISOR 16
+
+/*
+ * This function sets up the local APIC timer, with a timeout of
+ * 'clocks' APIC bus clock. During calibration we actually call
+ * this function twice on the boot CPU, once with a bogus timeout
+ * value, second time for real. The other (noncalibrating) CPUs
+ * call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
+ */
+static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
+{
+	unsigned int lvtt_value, tmp_value;
+
+	lvtt_value = LOCAL_TIMER_VECTOR;
+	if (!oneshot)
+		lvtt_value |= APIC_LVT_TIMER_PERIODIC;
+	if (!lapic_is_integrated())
+		lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
+
+	if (!irqen)
+		lvtt_value |= APIC_LVT_MASKED;
+
+	apic_write(APIC_LVTT, lvtt_value);
+
+	/*
+	 * Divide PICLK by 16
+	 */
+	tmp_value = apic_read(APIC_TDCR);
+	apic_write(APIC_TDCR,
+		(tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+		APIC_TDR_DIV_16);
+
+	if (!oneshot)
+		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
+}
+
+/*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ *
+ * If mask=1, the LVT entry does not generate interrupts while mask=0
+ * enables the vector. See also the BKDGs.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
+
+	apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_IBS;
+}
+EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs);
+
+/*
+ * Program the next event, relative to now
+ */
+static int lapic_next_event(unsigned long delta,
+			    struct clock_event_device *evt)
+{
+	apic_write(APIC_TMICT, delta);
+	return 0;
+}
+
+/*
+ * Setup the lapic timer in periodic or oneshot mode
+ */
+static void lapic_timer_setup(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int v;
+
+	/* Lapic used as dummy for broadcast ? */
+	if (evt->features & CLOCK_EVT_FEAT_DUMMY)
+		return;
+
+	local_irq_save(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+	case CLOCK_EVT_MODE_ONESHOT:
+		__setup_APIC_LVTT(calibration_result,
+				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		v = apic_read(APIC_LVTT);
+		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write(APIC_LVTT, v);
+		apic_write(APIC_TMICT, 0xffffffff);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Local APIC timer broadcast function
+ */
+static void lapic_timer_broadcast(const struct cpumask *mask)
+{
+#ifdef CONFIG_SMP
+	apic->send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
+#endif
+}
+
+/*
+ * Setup the local APIC timer for this CPU. Copy the initilized values
+ * of the boot CPU and register the clock event in the framework.
+ */
+static void __cpuinit setup_APIC_timer(void)
+{
+	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
+
+	memcpy(levt, &lapic_clockevent, sizeof(*levt));
+	levt->cpumask = cpumask_of(smp_processor_id());
+
+	clockevents_register_device(levt);
+}
+
+/*
+ * In this functions we calibrate APIC bus clocks to the external timer.
+ *
+ * We want to do the calibration only once since we want to have local timer
+ * irqs syncron. CPUs connected by the same APIC bus have the very same bus
+ * frequency.
+ *
+ * This was previously done by reading the PIT/HPET and waiting for a wrap
+ * around to find out, that a tick has elapsed. I have a box, where the PIT
+ * readout is broken, so it never gets out of the wait loop again. This was
+ * also reported by others.
+ *
+ * Monitoring the jiffies value is inaccurate and the clockevents
+ * infrastructure allows us to do a simple substitution of the interrupt
+ * handler.
+ *
+ * The calibration routine also uses the pm_timer when possible, as the PIT
+ * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes
+ * back to normal later in the boot process).
+ */
+
+#define LAPIC_CAL_LOOPS		(HZ/10)
+
+static __initdata int lapic_cal_loops = -1;
+static __initdata long lapic_cal_t1, lapic_cal_t2;
+static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2;
+static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2;
+static __initdata unsigned long lapic_cal_j1, lapic_cal_j2;
+
+/*
+ * Temporary interrupt handler.
+ */
+static void __init lapic_cal_handler(struct clock_event_device *dev)
+{
+	unsigned long long tsc = 0;
+	long tapic = apic_read(APIC_TMCCT);
+	unsigned long pm = acpi_pm_read_early();
+
+	if (cpu_has_tsc)
+		rdtscll(tsc);
+
+	switch (lapic_cal_loops++) {
+	case 0:
+		lapic_cal_t1 = tapic;
+		lapic_cal_tsc1 = tsc;
+		lapic_cal_pm1 = pm;
+		lapic_cal_j1 = jiffies;
+		break;
+
+	case LAPIC_CAL_LOOPS:
+		lapic_cal_t2 = tapic;
+		lapic_cal_tsc2 = tsc;
+		if (pm < lapic_cal_pm1)
+			pm += ACPI_PM_OVRRUN;
+		lapic_cal_pm2 = pm;
+		lapic_cal_j2 = jiffies;
+		break;
+	}
+}
+
+static int __init
+calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
+{
+	const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
+	const long pm_thresh = pm_100ms / 100;
+	unsigned long mult;
+	u64 res;
+
+#ifndef CONFIG_X86_PM_TIMER
+	return -1;
+#endif
+
+	apic_printk(APIC_VERBOSE, "... PM-Timer delta = %ld\n", deltapm);
+
+	/* Check, if the PM timer is available */
+	if (!deltapm)
+		return -1;
+
+	mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22);
+
+	if (deltapm > (pm_100ms - pm_thresh) &&
+	    deltapm < (pm_100ms + pm_thresh)) {
+		apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
+		return 0;
+	}
+
+	res = (((u64)deltapm) *  mult) >> 22;
+	do_div(res, 1000000);
+	pr_warning("APIC calibration not consistent "
+		   "with PM-Timer: %ldms instead of 100ms\n",(long)res);
+
+	/* Correct the lapic counter value */
+	res = (((u64)(*delta)) * pm_100ms);
+	do_div(res, deltapm);
+	pr_info("APIC delta adjusted to PM-Timer: "
+		"%lu (%ld)\n", (unsigned long)res, *delta);
+	*delta = (long)res;
+
+	/* Correct the tsc counter value */
+	if (cpu_has_tsc) {
+		res = (((u64)(*deltatsc)) * pm_100ms);
+		do_div(res, deltapm);
+		apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
+					  "PM-Timer: %lu (%ld) \n",
+					(unsigned long)res, *deltatsc);
+		*deltatsc = (long)res;
+	}
+
+	return 0;
+}
+
+static int __init calibrate_APIC_clock(void)
+{
+	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
+	void (*real_handler)(struct clock_event_device *dev);
+	unsigned long deltaj;
+	long delta, deltatsc;
+	int pm_referenced = 0;
+
+	local_irq_disable();
+
+	/* Replace the global interrupt handler */
+	real_handler = global_clock_event->event_handler;
+	global_clock_event->event_handler = lapic_cal_handler;
+
+	/*
+	 * Setup the APIC counter to maximum. There is no way the lapic
+	 * can underflow in the 100ms detection time frame
+	 */
+	__setup_APIC_LVTT(0xffffffff, 0, 0);
+
+	/* Let the interrupts run */
+	local_irq_enable();
+
+	while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
+		cpu_relax();
+
+	local_irq_disable();
+
+	/* Restore the real event handler */
+	global_clock_event->event_handler = real_handler;
+
+	/* Build delta t1-t2 as apic timer counts down */
+	delta = lapic_cal_t1 - lapic_cal_t2;
+	apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
+
+	deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
+
+	/* we trust the PM based calibration if possible */
+	pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
+					&delta, &deltatsc);
+
+	/* Calculate the scaled math multiplication factor */
+	lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
+				       lapic_clockevent.shift);
+	lapic_clockevent.max_delta_ns =
+		clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+	lapic_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xF, &lapic_clockevent);
+
+	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+
+	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
+	apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
+	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
+		    calibration_result);
+
+	if (cpu_has_tsc) {
+		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
+			    "%ld.%04ld MHz.\n",
+			    (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+			    (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+	}
+
+	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
+		    "%u.%04u MHz.\n",
+		    calibration_result / (1000000 / HZ),
+		    calibration_result % (1000000 / HZ));
+
+	/*
+	 * Do a sanity check on the APIC calibration result
+	 */
+	if (calibration_result < (1000000 / HZ)) {
+		local_irq_enable();
+		pr_warning("APIC frequency too slow, disabling apic timer\n");
+		return -1;
+	}
+
+	levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
+
+	/*
+	 * PM timer calibration failed or not turned on
+	 * so lets try APIC timer based calibration
+	 */
+	if (!pm_referenced) {
+		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
+
+		/*
+		 * Setup the apic timer manually
+		 */
+		levt->event_handler = lapic_cal_handler;
+		lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
+		lapic_cal_loops = -1;
+
+		/* Let the interrupts run */
+		local_irq_enable();
+
+		while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
+			cpu_relax();
+
+		/* Stop the lapic timer */
+		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
+
+		/* Jiffies delta */
+		deltaj = lapic_cal_j2 - lapic_cal_j1;
+		apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
+
+		/* Check, if the jiffies result is consistent */
+		if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
+			apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
+		else
+			levt->features |= CLOCK_EVT_FEAT_DUMMY;
+	} else
+		local_irq_enable();
+
+	if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
+		pr_warning("APIC timer disabled due to verification failure\n");
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+	/*
+	 * The local apic timer can be disabled via the kernel
+	 * commandline or from the CPU detection code. Register the lapic
+	 * timer as a dummy clock event source on SMP systems, so the
+	 * broadcast mechanism is used. On UP systems simply ignore it.
+	 */
+	if (disable_apic_timer) {
+		pr_info("Disabling APIC timer\n");
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1) {
+			lapic_clockevent.mult = 1;
+			setup_APIC_timer();
+		}
+		return;
+	}
+
+	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+		    "calibrating APIC timer ...\n");
+
+	if (calibrate_APIC_clock()) {
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
+	}
+
+	/*
+	 * If nmi_watchdog is set to IO_APIC, we need the
+	 * PIT/HPET going.  Otherwise register lapic as a dummy
+	 * device.
+	 */
+	if (nmi_watchdog != NMI_IO_APIC)
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	else
+		pr_warning("APIC timer registered as dummy,"
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+
+	/* Setup the lapic or request the broadcast */
+	setup_APIC_timer();
+}
+
+void __cpuinit setup_secondary_APIC_clock(void)
+{
+	setup_APIC_timer();
+}
+
+/*
+ * The guts of the apic timer interrupt
+ */
+static void local_apic_timer_interrupt(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
+
+	/*
+	 * Normally we should not be here till LAPIC has been initialized but
+	 * in some cases like kdump, its possible that there is a pending LAPIC
+	 * timer interrupt from previous kernel's context and is delivered in
+	 * new kernel the moment interrupts are enabled.
+	 *
+	 * Interrupts are enabled early and LAPIC is setup much later, hence
+	 * its possible that when we get here evt->event_handler is NULL.
+	 * Check for event_handler being NULL and discard the interrupt as
+	 * spurious.
+	 */
+	if (!evt->event_handler) {
+		pr_warning("Spurious LAPIC timer interrupt on cpu %d\n", cpu);
+		/* Switch it off */
+		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
+		return;
+	}
+
+	/*
+	 * the NMI deadlock-detector uses this.
+	 */
+	inc_irq_stat(apic_timer_irqs);
+
+	evt->event_handler(evt);
+}
+
+/*
+ * Local APIC timer interrupt. This is the most natural way for doing
+ * local interrupts, but local timer interrupts can be emulated by
+ * broadcast interrupts too. [in case the hw doesn't support APIC timers]
+ *
+ * [ if a single-CPU system runs an SMP kernel then we call the local
+ *   interrupt as well. Thus we cannot inline the local irq ... ]
+ */
+void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	/*
+	 * NOTE! We'd better ACK the irq immediately,
+	 * because timer handling can be slow.
+	 */
+	ack_APIC_irq();
+	/*
+	 * update_process_times() expects us to have done irq_enter().
+	 * Besides, if we don't timer interrupts ignore the global
+	 * interrupt lock, which is the WrongThing (tm) to do.
+	 */
+	exit_idle();
+	irq_enter();
+	local_apic_timer_interrupt();
+	irq_exit();
+
+	set_irq_regs(old_regs);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return -EINVAL;
+}
+
+/*
+ * Local APIC start and shutdown
+ */
+
+/**
+ * clear_local_APIC - shutdown the local APIC
+ *
+ * This is called, when a CPU is disabled and before rebooting, so the state of
+ * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
+ * leftovers during boot.
+ */
+void clear_local_APIC(void)
+{
+	int maxlvt;
+	u32 v;
+
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
+
+	maxlvt = lapic_get_maxlvt();
+	/*
+	 * Masking an LVT entry can trigger a local APIC error
+	 * if the vector is zero. Mask LVTERR first to prevent this.
+	 */
+	if (maxlvt >= 3) {
+		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
+		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
+	}
+	/*
+	 * Careful: we have to set masks only first to deassert
+	 * any level-triggered sources.
+	 */
+	v = apic_read(APIC_LVTT);
+	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
+	v = apic_read(APIC_LVT0);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
+	v = apic_read(APIC_LVT1);
+	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
+	if (maxlvt >= 4) {
+		v = apic_read(APIC_LVTPC);
+		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
+	}
+
+	/* lets not touch this if we didn't frob it */
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+	if (maxlvt >= 5) {
+		v = apic_read(APIC_LVTTHMR);
+		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+	}
+#endif
+	/*
+	 * Clean APIC state for other OSs:
+	 */
+	apic_write(APIC_LVTT, APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, APIC_LVT_MASKED);
+	if (maxlvt >= 3)
+		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
+	if (maxlvt >= 4)
+		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
+
+	/* Integrated APIC (!82489DX) ? */
+	if (lapic_is_integrated()) {
+		if (maxlvt > 3)
+			/* Clear ESR due to Pentium errata 3AP and 11AP */
+			apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+	}
+}
+
+/**
+ * disable_local_APIC - clear and disable the local APIC
+ */
+void disable_local_APIC(void)
+{
+	unsigned int value;
+
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
+
+	clear_local_APIC();
+
+	/*
+	 * Disable APIC (implies clearing of registers
+	 * for 82489DX!).
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_SPIV_APIC_ENABLED;
+	apic_write(APIC_SPIV, value);
+
+#ifdef CONFIG_X86_32
+	/*
+	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
+	 * restore the disabled state.
+	 */
+	if (enabled_via_apicbase) {
+		unsigned int l, h;
+
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_ENABLE;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	}
+#endif
+}
+
+/*
+ * If Linux enabled the LAPIC against the BIOS default disable it down before
+ * re-entering the BIOS on shutdown.  Otherwise the BIOS may get confused and
+ * not power-off.  Additionally clear all LVT entries before disable_local_APIC
+ * for the case where Linux didn't enable the LAPIC.
+ */
+void lapic_shutdown(void)
+{
+	unsigned long flags;
+
+	if (!cpu_has_apic)
+		return;
+
+	local_irq_save(flags);
+
+#ifdef CONFIG_X86_32
+	if (!enabled_via_apicbase)
+		clear_local_APIC();
+	else
+#endif
+		disable_local_APIC();
+
+
+	local_irq_restore(flags);
+}
+
+/*
+ * This is to verify that we're looking at a real local APIC.
+ * Check these against your board if the CPUs aren't getting
+ * started for no apparent reason.
+ */
+int __init verify_local_APIC(void)
+{
+	unsigned int reg0, reg1;
+
+	/*
+	 * The version register is read-only in a real APIC.
+	 */
+	reg0 = apic_read(APIC_LVR);
+	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
+	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
+	reg1 = apic_read(APIC_LVR);
+	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
+
+	/*
+	 * The two version reads above should print the same
+	 * numbers.  If the second one is different, then we
+	 * poke at a non-APIC.
+	 */
+	if (reg1 != reg0)
+		return 0;
+
+	/*
+	 * Check if the version looks reasonably.
+	 */
+	reg1 = GET_APIC_VERSION(reg0);
+	if (reg1 == 0x00 || reg1 == 0xff)
+		return 0;
+	reg1 = lapic_get_maxlvt();
+	if (reg1 < 0x02 || reg1 == 0xff)
+		return 0;
+
+	/*
+	 * The ID register is read/write in a real APIC.
+	 */
+	reg0 = apic_read(APIC_ID);
+	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+	apic_write(APIC_ID, reg0 ^ apic->apic_id_mask);
+	reg1 = apic_read(APIC_ID);
+	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
+	apic_write(APIC_ID, reg0);
+	if (reg1 != (reg0 ^ apic->apic_id_mask))
+		return 0;
+
+	/*
+	 * The next two are just to see if we have sane values.
+	 * They're only really relevant if we're in Virtual Wire
+	 * compatibility mode, but most boxes are anymore.
+	 */
+	reg0 = apic_read(APIC_LVT0);
+	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
+	reg1 = apic_read(APIC_LVT1);
+	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
+
+	return 1;
+}
+
+/**
+ * sync_Arb_IDs - synchronize APIC bus arbitration IDs
+ */
+void __init sync_Arb_IDs(void)
+{
+	/*
+	 * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
+	 * needed on AMD.
+	 */
+	if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+		return;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
+	apic_write(APIC_ICR, APIC_DEST_ALLINC |
+			APIC_INT_LEVELTRIG | APIC_DM_INIT);
+}
+
+/*
+ * An initial setup of the virtual wire mode.
+ */
+void __init init_bsp_APIC(void)
+{
+	unsigned int value;
+
+	/*
+	 * Don't do the setup now if we have a SMP BIOS as the
+	 * through-I/O-APIC virtual wire mode might be active.
+	 */
+	if (smp_found_config || !cpu_has_apic)
+		return;
+
+	/*
+	 * Do not trust the local APIC being empty at bootup.
+	 */
+	clear_local_APIC();
+
+	/*
+	 * Enable APIC.
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+
+#ifdef CONFIG_X86_32
+	/* This bit is reserved on P4/Xeon and should be cleared */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    (boot_cpu_data.x86 == 15))
+		value &= ~APIC_SPIV_FOCUS_DISABLED;
+	else
+#endif
+		value |= APIC_SPIV_FOCUS_DISABLED;
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write(APIC_SPIV, value);
+
+	/*
+	 * Set up the virtual wire mode.
+	 */
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
+	value = APIC_DM_NMI;
+	if (!lapic_is_integrated())		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write(APIC_LVT1, value);
+}
+
+static void __cpuinit lapic_setup_esr(void)
+{
+	unsigned int oldvalue, value, maxlvt;
+
+	if (!lapic_is_integrated()) {
+		pr_info("No ESR for 82489DX.\n");
+		return;
+	}
+
+	if (apic->disable_esr) {
+		/*
+		 * Something untraceable is creating bad interrupts on
+		 * secondary quads ... for the moment, just leave the
+		 * ESR disabled - we can't do anything useful with the
+		 * errors anyway - mbligh
+		 */
+		pr_info("Leaving ESR disabled.\n");
+		return;
+	}
+
+	maxlvt = lapic_get_maxlvt();
+	if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
+		apic_write(APIC_ESR, 0);
+	oldvalue = apic_read(APIC_ESR);
+
+	/* enables sending errors */
+	value = ERROR_APIC_VECTOR;
+	apic_write(APIC_LVTERR, value);
+
+	/*
+	 * spec says clear errors after enabling vector.
+	 */
+	if (maxlvt > 3)
+		apic_write(APIC_ESR, 0);
+	value = apic_read(APIC_ESR);
+	if (value != oldvalue)
+		apic_printk(APIC_VERBOSE, "ESR value before enabling "
+			"vector: 0x%08x  after: 0x%08x\n",
+			oldvalue, value);
+}
+
+
+/**
+ * setup_local_APIC - setup the local APIC
+ */
+void __cpuinit setup_local_APIC(void)
+{
+	unsigned int value;
+	int i, j;
+
+	if (disable_apic) {
+		arch_disable_smp_support();
+		return;
+	}
+
+#ifdef CONFIG_X86_32
+	/* Pound the ESR really hard over the head with a big hammer - mbligh */
+	if (lapic_is_integrated() && apic->disable_esr) {
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+	}
+#endif
+
+	preempt_disable();
+
+	/*
+	 * Double-check whether this APIC is really registered.
+	 * This is meaningless in clustered apic mode, so we skip it.
+	 */
+	if (!apic->apic_id_registered())
+		BUG();
+
+	/*
+	 * Intel recommends to set DFR, LDR and TPR before enabling
+	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+	 * document number 292116).  So here it goes...
+	 */
+	apic->init_apic_ldr();
+
+	/*
+	 * Set Task Priority to 'accept all'. We never change this
+	 * later on.
+	 */
+	value = apic_read(APIC_TASKPRI);
+	value &= ~APIC_TPRI_MASK;
+	apic_write(APIC_TASKPRI, value);
+
+	/*
+	 * After a crash, we no longer service the interrupts and a pending
+	 * interrupt from previous kernel might still have ISR bit set.
+	 *
+	 * Most probably by now CPU has serviced that pending interrupt and
+	 * it might not have done the ack_APIC_irq() because it thought,
+	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+	 * does not clear the ISR bit and cpu thinks it has already serivced
+	 * the interrupt. Hence a vector might get locked. It was noticed
+	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+	 */
+	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+		value = apic_read(APIC_ISR + i*0x10);
+		for (j = 31; j >= 0; j--) {
+			if (value & (1<<j))
+				ack_APIC_irq();
+		}
+	}
+
+	/*
+	 * Now that we are all set up, enable the APIC
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	/*
+	 * Enable APIC
+	 */
+	value |= APIC_SPIV_APIC_ENABLED;
+
+#ifdef CONFIG_X86_32
+	/*
+	 * Some unknown Intel IO/APIC (or APIC) errata is biting us with
+	 * certain networking cards. If high frequency interrupts are
+	 * happening on a particular IOAPIC pin, plus the IOAPIC routing
+	 * entry is masked/unmasked at a high rate as well then sooner or
+	 * later IOAPIC line gets 'stuck', no more interrupts are received
+	 * from the device. If focus CPU is disabled then the hang goes
+	 * away, oh well :-(
+	 *
+	 * [ This bug can be reproduced easily with a level-triggered
+	 *   PCI Ne2000 networking cards and PII/PIII processors, dual
+	 *   BX chipset. ]
+	 */
+	/*
+	 * Actually disabling the focus CPU check just makes the hang less
+	 * frequent as it makes the interrupt distributon model be more
+	 * like LRU than MRU (the short-term load is more even across CPUs).
+	 * See also the comment in end_level_ioapic_irq().  --macro
+	 */
+
+	/*
+	 * - enable focus processor (bit==0)
+	 * - 64bit mode always use processor focus
+	 *   so no need to set it
+	 */
+	value &= ~APIC_SPIV_FOCUS_DISABLED;
+#endif
+
+	/*
+	 * Set spurious IRQ vector
+	 */
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write(APIC_SPIV, value);
+
+	/*
+	 * Set up LVT0, LVT1:
+	 *
+	 * set up through-local-APIC on the BP's LINT0. This is not
+	 * strictly necessary in pure symmetric-IO mode, but sometimes
+	 * we delegate interrupts to the 8259A.
+	 */
+	/*
+	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
+	 */
+	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
+	if (!smp_processor_id() && (pic_mode || !value)) {
+		value = APIC_DM_EXTINT;
+		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
+				smp_processor_id());
+	} else {
+		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
+		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
+				smp_processor_id());
+	}
+	apic_write(APIC_LVT0, value);
+
+	/*
+	 * only the BP should see the LINT1 NMI signal, obviously.
+	 */
+	if (!smp_processor_id())
+		value = APIC_DM_NMI;
+	else
+		value = APIC_DM_NMI | APIC_LVT_MASKED;
+	if (!lapic_is_integrated())		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write(APIC_LVT1, value);
+
+	preempt_enable();
+}
+
+void __cpuinit end_local_APIC_setup(void)
+{
+	lapic_setup_esr();
+
+#ifdef CONFIG_X86_32
+	{
+		unsigned int value;
+		/* Disable the local apic timer */
+		value = apic_read(APIC_LVTT);
+		value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write(APIC_LVTT, value);
+	}
+#endif
+
+	setup_apic_nmi_watchdog(NULL);
+	apic_pm_activate();
+}
+
+#ifdef CONFIG_X86_X2APIC
+void check_x2apic(void)
+{
+	int msr, msr2;
+
+	if (!cpu_has_x2apic)
+		return;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+
+	if (msr & X2APIC_ENABLE) {
+		pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
+		x2apic_preenabled = x2apic = 1;
+	}
+}
+
+void enable_x2apic(void)
+{
+	int msr, msr2;
+
+	if (!x2apic)
+		return;
+
+	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	if (!(msr & X2APIC_ENABLE)) {
+		pr_info("Enabling x2apic\n");
+		wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
+	}
+}
+
+void __init enable_IR_x2apic(void)
+{
+#ifdef CONFIG_INTR_REMAP
+	int ret;
+	unsigned long flags;
+
+	if (!cpu_has_x2apic)
+		return;
+
+	if (!x2apic_preenabled && disable_x2apic) {
+		pr_info("Skipped enabling x2apic and Interrupt-remapping "
+			"because of nox2apic\n");
+		return;
+	}
+
+	if (x2apic_preenabled && disable_x2apic)
+		panic("Bios already enabled x2apic, can't enforce nox2apic");
+
+	if (!x2apic_preenabled && skip_ioapic_setup) {
+		pr_info("Skipped enabling x2apic and Interrupt-remapping "
+			"because of skipping io-apic setup\n");
+		return;
+	}
+
+	ret = dmar_table_init();
+	if (ret) {
+		pr_info("dmar_table_init() failed with %d:\n", ret);
+
+		if (x2apic_preenabled)
+			panic("x2apic enabled by bios. But IR enabling failed");
+		else
+			pr_info("Not enabling x2apic,Intr-remapping\n");
+		return;
+	}
+
+	local_irq_save(flags);
+	mask_8259A();
+
+	ret = save_mask_IO_APIC_setup();
+	if (ret) {
+		pr_info("Saving IO-APIC state failed: %d\n", ret);
+		goto end;
+	}
+
+	ret = enable_intr_remapping(1);
+
+	if (ret && x2apic_preenabled) {
+		local_irq_restore(flags);
+		panic("x2apic enabled by bios. But IR enabling failed");
+	}
+
+	if (ret)
+		goto end_restore;
+
+	if (!x2apic) {
+		x2apic = 1;
+		enable_x2apic();
+	}
+
+end_restore:
+	if (ret)
+		/*
+		 * IR enabling failed
+		 */
+		restore_IO_APIC_setup();
+	else
+		reinit_intr_remapped_IO_APIC(x2apic_preenabled);
+
+end:
+	unmask_8259A();
+	local_irq_restore(flags);
+
+	if (!ret) {
+		if (!x2apic_preenabled)
+			pr_info("Enabled x2apic and interrupt-remapping\n");
+		else
+			pr_info("Enabled Interrupt-remapping\n");
+	} else
+		pr_err("Failed to enable Interrupt-remapping and x2apic\n");
+#else
+	if (!cpu_has_x2apic)
+		return;
+
+	if (x2apic_preenabled)
+		panic("x2apic enabled prior OS handover,"
+		      " enable CONFIG_INTR_REMAP");
+
+	pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
+		" and x2apic\n");
+#endif
+
+	return;
+}
+#endif /* CONFIG_X86_X2APIC */
+
+#ifdef CONFIG_X86_64
+/*
+ * Detect and enable local APICs on non-SMP boards.
+ * Original code written by Keir Fraser.
+ * On AMD64 we trust the BIOS - if it says no APIC it is likely
+ * not correctly set up (usually the APIC timer won't work etc.)
+ */
+static int __init detect_init_APIC(void)
+{
+	if (!cpu_has_apic) {
+		pr_info("No local APIC present\n");
+		return -1;
+	}
+
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+	boot_cpu_physical_apicid = 0;
+	return 0;
+}
+#else
+/*
+ * Detect and initialize APIC
+ */
+static int __init detect_init_APIC(void)
+{
+	u32 h, l, features;
+
+	/* Disabled by kernel option? */
+	if (disable_apic)
+		return -1;
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
+		    (boot_cpu_data.x86 >= 15))
+			break;
+		goto no_apic;
+	case X86_VENDOR_INTEL:
+		if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
+		    (boot_cpu_data.x86 == 5 && cpu_has_apic))
+			break;
+		goto no_apic;
+	default:
+		goto no_apic;
+	}
+
+	if (!cpu_has_apic) {
+		/*
+		 * Over-ride BIOS and try to enable the local APIC only if
+		 * "lapic" specified.
+		 */
+		if (!force_enable_local_apic) {
+			pr_info("Local APIC disabled by BIOS -- "
+				"you can enable it with \"lapic\"\n");
+			return -1;
+		}
+		/*
+		 * Some BIOSes disable the local APIC in the APIC_BASE
+		 * MSR. This can only be done in software for Intel P6 or later
+		 * and AMD K7 (Model > 1) or later.
+		 */
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
+	}
+	/*
+	 * The APIC feature bit should now be enabled
+	 * in `cpuid'
+	 */
+	features = cpuid_edx(1);
+	if (!(features & (1 << X86_FEATURE_APIC))) {
+		pr_warning("Could not enable APIC!\n");
+		return -1;
+	}
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/* The BIOS may have set up the APIC at some other address */
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	if (l & MSR_IA32_APICBASE_ENABLE)
+		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+	pr_info("Found and enabled local APIC!\n");
+
+	apic_pm_activate();
+
+	return 0;
+
+no_apic:
+	pr_info("No local APIC present or hardware disabled\n");
+	return -1;
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __init early_init_lapic_mapping(void)
+{
+	unsigned long phys_addr;
+
+	/*
+	 * If no local APIC can be found then go out
+	 * : it means there is no mpatable and MADT
+	 */
+	if (!smp_found_config)
+		return;
+
+	phys_addr = mp_lapic_addr;
+
+	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+		    APIC_BASE, phys_addr);
+
+	/*
+	 * Fetch the APIC ID of the BSP in case we have a
+	 * default configuration (or the MP table is broken).
+	 */
+	boot_cpu_physical_apicid = read_apic_id();
+}
+#endif
+
+/**
+ * init_apic_mappings - initialize APIC mappings
+ */
+void __init init_apic_mappings(void)
+{
+#ifdef CONFIG_X86_X2APIC
+	if (x2apic) {
+		boot_cpu_physical_apicid = read_apic_id();
+		return;
+	}
+#endif
+
+	/*
+	 * If no local APIC can be found then set up a fake all
+	 * zeroes page to simulate the local APIC and another
+	 * one for the IO-APIC.
+	 */
+	if (!smp_found_config && detect_init_APIC()) {
+		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+		apic_phys = __pa(apic_phys);
+	} else
+		apic_phys = mp_lapic_addr;
+
+	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+	apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
+				APIC_BASE, apic_phys);
+
+	/*
+	 * Fetch the APIC ID of the BSP in case we have a
+	 * default configuration (or the MP table is broken).
+	 */
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = read_apic_id();
+}
+
+/*
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
+ */
+int apic_version[MAX_APICS];
+
+int __init APIC_init_uniprocessor(void)
+{
+	if (disable_apic) {
+		pr_info("Apic disabled\n");
+		return -1;
+	}
+#ifdef CONFIG_X86_64
+	if (!cpu_has_apic) {
+		disable_apic = 1;
+		pr_info("Apic disabled by BIOS\n");
+		return -1;
+	}
+#else
+	if (!smp_found_config && !cpu_has_apic)
+		return -1;
+
+	/*
+	 * Complain if the BIOS pretends there is one.
+	 */
+	if (!cpu_has_apic &&
+	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
+			boot_cpu_physical_apicid);
+		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+		return -1;
+	}
+#endif
+
+	enable_IR_x2apic();
+#ifdef CONFIG_X86_64
+	default_setup_apic_routing();
+#endif
+
+	verify_local_APIC();
+	connect_bsp_APIC();
+
+#ifdef CONFIG_X86_64
+	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
+#else
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+# ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = read_apic_id();
+# endif
+#endif
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
+	setup_local_APIC();
+
+#ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Now enable IO-APICs, actually call clear_IO_APIC
+	 * We need clear_IO_APIC before enabling error vector
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		enable_IO_APIC();
+#endif
+
+	end_local_APIC_setup();
+
+#ifdef CONFIG_X86_IO_APIC
+	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+	else {
+		nr_ioapics = 0;
+		localise_nmi_watchdog();
+	}
+#else
+	localise_nmi_watchdog();
+#endif
+
+	setup_boot_clock();
+#ifdef CONFIG_X86_64
+	check_nmi_watchdog();
+#endif
+
+	return 0;
+}
+
+/*
+ * Local APIC interrupts
+ */
+
+/*
+ * This interrupt should _never_ happen with our APIC/SMP architecture
+ */
+void smp_spurious_interrupt(struct pt_regs *regs)
+{
+	u32 v;
+
+	exit_idle();
+	irq_enter();
+	/*
+	 * Check if this really is a spurious interrupt and ACK it
+	 * if it is a vectored one.  Just in case...
+	 * Spurious interrupts should not be ACKed.
+	 */
+	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
+	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
+		ack_APIC_irq();
+
+	inc_irq_stat(irq_spurious_count);
+
+	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
+	pr_info("spurious APIC interrupt on CPU#%d, "
+		"should never happen.\n", smp_processor_id());
+	irq_exit();
+}
+
+/*
+ * This interrupt should never happen with our APIC/SMP architecture
+ */
+void smp_error_interrupt(struct pt_regs *regs)
+{
+	u32 v, v1;
+
+	exit_idle();
+	irq_enter();
+	/* First tickle the hardware, only then report what went on. -- REW */
+	v = apic_read(APIC_ESR);
+	apic_write(APIC_ESR, 0);
+	v1 = apic_read(APIC_ESR);
+	ack_APIC_irq();
+	atomic_inc(&irq_err_count);
+
+	/*
+	 * Here is what the APIC error bits mean:
+	 * 0: Send CS error
+	 * 1: Receive CS error
+	 * 2: Send accept error
+	 * 3: Receive accept error
+	 * 4: Reserved
+	 * 5: Send illegal vector
+	 * 6: Received illegal vector
+	 * 7: Illegal register address
+	 */
+	pr_debug("APIC error on CPU%d: %02x(%02x)\n",
+		smp_processor_id(), v , v1);
+	irq_exit();
+}
+
+/**
+ * connect_bsp_APIC - attach the APIC to the interrupt system
+ */
+void __init connect_bsp_APIC(void)
+{
+#ifdef CONFIG_X86_32
+	if (pic_mode) {
+		/*
+		 * Do not trust the local APIC being empty at bootup.
+		 */
+		clear_local_APIC();
+		/*
+		 * PIC mode, enable APIC mode in the IMCR, i.e.  connect BSP's
+		 * local APIC to INT and NMI lines.
+		 */
+		apic_printk(APIC_VERBOSE, "leaving PIC mode, "
+				"enabling APIC mode.\n");
+		outb(0x70, 0x22);
+		outb(0x01, 0x23);
+	}
+#endif
+	if (apic->enable_apic_mode)
+		apic->enable_apic_mode();
+}
+
+/**
+ * disconnect_bsp_APIC - detach the APIC from the interrupt system
+ * @virt_wire_setup:	indicates, whether virtual wire mode is selected
+ *
+ * Virtual wire mode is necessary to deliver legacy interrupts even when the
+ * APIC is disabled.
+ */
+void disconnect_bsp_APIC(int virt_wire_setup)
+{
+	unsigned int value;
+
+#ifdef CONFIG_X86_32
+	if (pic_mode) {
+		/*
+		 * Put the board back into PIC mode (has an effect only on
+		 * certain older boards).  Note that APIC interrupts, including
+		 * IPIs, won't work beyond this point!  The only exception are
+		 * INIT IPIs.
+		 */
+		apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+				"entering PIC mode.\n");
+		outb(0x70, 0x22);
+		outb(0x00, 0x23);
+		return;
+	}
+#endif
+
+	/* Go back to Virtual Wire compatibility mode */
+
+	/* For the spurious interrupt use vector F, and enable it */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+	value |= 0xf;
+	apic_write(APIC_SPIV, value);
+
+	if (!virt_wire_setup) {
+		/*
+		 * For LVT0 make it edge triggered, active high,
+		 * external and enabled
+		 */
+		value = apic_read(APIC_LVT0);
+		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+		apic_write(APIC_LVT0, value);
+	} else {
+		/* Disable LVT0 */
+		apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	}
+
+	/*
+	 * For LVT1 make it edge triggered, active high,
+	 * nmi and enabled
+	 */
+	value = apic_read(APIC_LVT1);
+	value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+	value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+	value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+	apic_write(APIC_LVT1, value);
+}
+
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+	int cpu;
+
+	/*
+	 * Validate version
+	 */
+	if (version == 0x0) {
+		pr_warning("BIOS bug, APIC version is 0 for CPU#%d! "
+			   "fixing up to 0x10. (tell your hw vendor)\n",
+				version);
+		version = 0x10;
+	}
+	apic_version[apicid] = version;
+
+	if (num_processors >= nr_cpu_ids) {
+		int max = nr_cpu_ids;
+		int thiscpu = max + disabled_cpus;
+
+		pr_warning(
+			"ACPI: NR_CPUS/possible_cpus limit of %i reached."
+			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
+
+		disabled_cpus++;
+		return;
+	}
+
+	num_processors++;
+	cpu = cpumask_next_zero(-1, cpu_present_mask);
+
+	if (version != apic_version[boot_cpu_physical_apicid])
+		WARN_ONCE(1,
+			"ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
+			apic_version[boot_cpu_physical_apicid], cpu, version);
+
+	physid_set(apicid, phys_cpu_present_map);
+	if (apicid == boot_cpu_physical_apicid) {
+		/*
+		 * x86_bios_cpu_apicid is required to have processors listed
+		 * in same order as logical cpu numbers. Hence the first
+		 * entry is BSP, and so on.
+		 */
+		cpu = 0;
+	}
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
+#ifdef CONFIG_X86_32
+	/*
+	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+	 * but we need to work other dependencies like SMP_SUSPEND etc
+	 * before this can be done without some confusion.
+	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+	 *       - Ashok Raj <ashok.raj@intel.com>
+	 */
+	if (max_physical_apicid >= 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+#endif
+
+#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
+	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+#endif
+
+	set_cpu_possible(cpu, true);
+	set_cpu_present(cpu, true);
+}
+
+int hard_smp_processor_id(void)
+{
+	return read_apic_id();
+}
+
+void default_init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write(APIC_LDR, val);
+}
+
+#ifdef CONFIG_X86_32
+int default_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+#endif
+
+/*
+ * Power management
+ */
+#ifdef CONFIG_PM
+
+static struct {
+	/*
+	 * 'active' is true if the local APIC was enabled by us and
+	 * not the BIOS; this signifies that we are also responsible
+	 * for disabling it before entering apm/acpi suspend
+	 */
+	int active;
+	/* r/w apic fields */
+	unsigned int apic_id;
+	unsigned int apic_taskpri;
+	unsigned int apic_ldr;
+	unsigned int apic_dfr;
+	unsigned int apic_spiv;
+	unsigned int apic_lvtt;
+	unsigned int apic_lvtpc;
+	unsigned int apic_lvt0;
+	unsigned int apic_lvt1;
+	unsigned int apic_lvterr;
+	unsigned int apic_tmict;
+	unsigned int apic_tdcr;
+	unsigned int apic_thmr;
+} apic_pm_state;
+
+static int lapic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned long flags;
+	int maxlvt;
+
+	if (!apic_pm_state.active)
+		return 0;
+
+	maxlvt = lapic_get_maxlvt();
+
+	apic_pm_state.apic_id = apic_read(APIC_ID);
+	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
+	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
+	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
+	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
+	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
+	if (maxlvt >= 4)
+		apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
+	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
+	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
+	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
+	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
+	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+	if (maxlvt >= 5)
+		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+#endif
+
+	local_irq_save(flags);
+	disable_local_APIC();
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int lapic_resume(struct sys_device *dev)
+{
+	unsigned int l, h;
+	unsigned long flags;
+	int maxlvt;
+
+	if (!apic_pm_state.active)
+		return 0;
+
+	maxlvt = lapic_get_maxlvt();
+
+	local_irq_save(flags);
+
+#ifdef CONFIG_X86_X2APIC
+	if (x2apic)
+		enable_x2apic();
+	else
+#endif
+	{
+		/*
+		 * Make sure the APICBASE points to the right address
+		 *
+		 * FIXME! This will be wrong if we ever support suspend on
+		 * SMP! We'll need to do this as part of the CPU restore!
+		 */
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_BASE;
+		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	}
+
+	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
+	apic_write(APIC_ID, apic_pm_state.apic_id);
+	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
+	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
+	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
+	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
+	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
+	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
+	if (maxlvt >= 5)
+		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
+#endif
+	if (maxlvt >= 4)
+		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
+	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
+	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
+	apic_write(APIC_ESR, 0);
+	apic_read(APIC_ESR);
+	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
+	apic_write(APIC_ESR, 0);
+	apic_read(APIC_ESR);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/*
+ * This device has no shutdown method - fully functioning local APICs
+ * are needed on every CPU up until machine_halt/restart/poweroff.
+ */
+
+static struct sysdev_class lapic_sysclass = {
+	.name		= "lapic",
+	.resume		= lapic_resume,
+	.suspend	= lapic_suspend,
+};
+
+static struct sys_device device_lapic = {
+	.id	= 0,
+	.cls	= &lapic_sysclass,
+};
+
+static void __cpuinit apic_pm_activate(void)
+{
+	apic_pm_state.active = 1;
+}
+
+static int __init init_lapic_sysfs(void)
+{
+	int error;
+
+	if (!cpu_has_apic)
+		return 0;
+	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
+
+	error = sysdev_class_register(&lapic_sysclass);
+	if (!error)
+		error = sysdev_register(&device_lapic);
+	return error;
+}
+device_initcall(init_lapic_sysfs);
+
+#else	/* CONFIG_PM */
+
+static void apic_pm_activate(void) { }
+
+#endif	/* CONFIG_PM */
+
+#ifdef CONFIG_X86_64
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ *
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis. Use available data to take a good guess.
+ * If in doubt, go HPET.
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+	int i, clusters, zeros;
+	unsigned id;
+	u16 *bios_cpu_apicid;
+	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
+
+	/*
+	 * there is not this kind of box with AMD CPU yet.
+	 * Some AMD box with quadcore cpu and 8 sockets apicid
+	 * will be [4, 0x23] or [8, 0x27] could be thought to
+	 * vsmp box still need checking...
+	 */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
+		return 0;
+
+	bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
+	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
+
+	for (i = 0; i < nr_cpu_ids; i++) {
+		/* are we being called early in kernel startup? */
+		if (bios_cpu_apicid) {
+			id = bios_cpu_apicid[i];
+		} else if (i < nr_cpu_ids) {
+			if (cpu_present(i))
+				id = per_cpu(x86_bios_cpu_apicid, i);
+			else
+				continue;
+		} else
+			break;
+
+		if (id != BAD_APICID)
+			__set_bit(APIC_CLUSTERID(id), clustermap);
+	}
+
+	/* Problem:  Partially populated chassis may not have CPUs in some of
+	 * the APIC clusters they have been allocated.  Only present CPUs have
+	 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
+	 * Since clusters are allocated sequentially, count zeros only if
+	 * they are bounded by ones.
+	 */
+	clusters = 0;
+	zeros = 0;
+	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
+		if (test_bit(i, clustermap)) {
+			clusters += 1 + zeros;
+			zeros = 0;
+		} else
+			++zeros;
+	}
+
+	/* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+	 * not guaranteed to be synced between boards
+	 */
+	if (is_vsmp_box() && clusters > 1)
+		return 1;
+
+	/*
+	 * If clusters > 2, then should be multi-chassis.
+	 * May have to revisit this when multi-core + hyperthreaded CPUs come
+	 * out, but AFAIK this will work even for them.
+	 */
+	return (clusters > 2);
+}
+#endif
+
+/*
+ * APIC command line parameters
+ */
+static int __init setup_disableapic(char *arg)
+{
+	disable_apic = 1;
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
+	return 0;
+}
+early_param("disableapic", setup_disableapic);
+
+/* same as disableapic, for compatibility */
+static int __init setup_nolapic(char *arg)
+{
+	return setup_disableapic(arg);
+}
+early_param("nolapic", setup_nolapic);
+
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+	local_apic_timer_c2_ok = 1;
+	return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
+static int __init parse_disable_apic_timer(char *arg)
+{
+	disable_apic_timer = 1;
+	return 0;
+}
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+	disable_apic_timer = 1;
+	return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
+
+static int __init apic_set_verbosity(char *arg)
+{
+	if (!arg)  {
+#ifdef CONFIG_X86_64
+		skip_ioapic_setup = 0;
+		return 0;
+#endif
+		return -EINVAL;
+	}
+
+	if (strcmp("debug", arg) == 0)
+		apic_verbosity = APIC_DEBUG;
+	else if (strcmp("verbose", arg) == 0)
+		apic_verbosity = APIC_VERBOSE;
+	else {
+		pr_warning("APIC Verbosity level %s not recognised"
+			" use apic=verbose or apic=debug\n", arg);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+early_param("apic", apic_set_verbosity);
+
+static int __init lapic_insert_resource(void)
+{
+	if (!apic_phys)
+		return -1;
+
+	/* Put local APIC into the resource map. */
+	lapic_resource.start = apic_phys;
+	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+	insert_resource(&iomem_resource, &lapic_resource);
+
+	return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apic/apic_64.c b/arch/x86/kernel/apic/apic_64.c
new file mode 100644
index 00000000000..70935dd904d
--- /dev/null
+++ b/arch/x86/kernel/apic/apic_64.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch probe layer.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/hardirq.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/setup.h>
+
+extern struct apic apic_flat;
+extern struct apic apic_physflat;
+extern struct apic apic_x2xpic_uv_x;
+extern struct apic apic_x2apic_phys;
+extern struct apic apic_x2apic_cluster;
+
+struct apic __read_mostly *apic = &apic_flat;
+EXPORT_SYMBOL_GPL(apic);
+
+static struct apic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_UV
+	&apic_x2apic_uv_x,
+#endif
+#ifdef CONFIG_X86_X2APIC
+	&apic_x2apic_phys,
+	&apic_x2apic_cluster,
+#endif
+	&apic_physflat,
+	NULL,
+};
+
+/*
+ * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
+ */
+void __init default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_X2APIC
+	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
+		if (!intr_remapping_enabled)
+			apic = &apic_flat;
+	}
+#endif
+
+	if (apic == &apic_flat) {
+		if (max_physical_apicid >= 8)
+			apic = &apic_physflat;
+		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+	}
+
+	if (x86_quirks->update_apic)
+		x86_quirks->update_apic();
+}
+
+/* Same for both flat and physical. */
+
+void apic_send_IPI_self(int vector)
+{
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
+}
+
+int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+			apic = apic_probe[i];
+			printk(KERN_INFO "Setting APIC routing to %s.\n",
+				apic->name);
+			return 1;
+		}
+	}
+	return 0;
+}
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
new file mode 100644
index 00000000000..3b002995e14
--- /dev/null
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -0,0 +1,389 @@
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Flat APIC subarch code.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/hardirq.h>
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+
+static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 1;
+}
+
+static const struct cpumask *flat_target_cpus(void)
+{
+	return cpu_online_mask;
+}
+
+static void flat_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	cpumask_clear(retmask);
+	cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static void flat_init_apic_ldr(void)
+{
+	unsigned long val;
+	unsigned long num, id;
+
+	num = smp_processor_id();
+	id = 1UL << num;
+	apic_write(APIC_DFR, APIC_DFR_FLAT);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
+{
+	unsigned long mask = cpumask_bits(cpumask)[0];
+
+	_flat_send_IPI_mask(mask, vector);
+}
+
+static void
+ flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
+{
+	unsigned long mask = cpumask_bits(cpumask)[0];
+	int cpu = smp_processor_id();
+
+	if (cpu < BITS_PER_LONG)
+		clear_bit(cpu, &mask);
+
+	_flat_send_IPI_mask(mask, vector);
+}
+
+static void flat_send_IPI_allbutself(int vector)
+{
+	int cpu = smp_processor_id();
+#ifdef	CONFIG_HOTPLUG_CPU
+	int hotplug = 1;
+#else
+	int hotplug = 0;
+#endif
+	if (hotplug || vector == NMI_VECTOR) {
+		if (!cpumask_equal(cpu_online_mask, cpumask_of(cpu))) {
+			unsigned long mask = cpumask_bits(cpu_online_mask)[0];
+
+			if (cpu < BITS_PER_LONG)
+				clear_bit(cpu, &mask);
+
+			_flat_send_IPI_mask(mask, vector);
+		}
+	} else if (num_online_cpus() > 1) {
+		__default_send_IPI_shortcut(APIC_DEST_ALLBUT,
+					    vector, apic->dest_logical);
+	}
+}
+
+static void flat_send_IPI_all(int vector)
+{
+	if (vector == NMI_VECTOR) {
+		flat_send_IPI_mask(cpu_online_mask, vector);
+	} else {
+		__default_send_IPI_shortcut(APIC_DEST_ALLINC,
+					    vector, apic->dest_logical);
+	}
+}
+
+static unsigned int flat_get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = (((x)>>24) & 0xFFu);
+
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = ((id & 0xFFu)<<24);
+	return x;
+}
+
+static unsigned int read_xapic_id(void)
+{
+	unsigned int id;
+
+	id = flat_get_apic_id(apic_read(APIC_ID));
+	return id;
+}
+
+static int flat_apic_id_registered(void)
+{
+	return physid_isset(read_xapic_id(), phys_cpu_present_map);
+}
+
+static unsigned int flat_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	return cpumask_bits(cpumask)[0] & APIC_ALL_CPUS;
+}
+
+static unsigned int flat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+						const struct cpumask *andmask)
+{
+	unsigned long mask1 = cpumask_bits(cpumask)[0] & APIC_ALL_CPUS;
+	unsigned long mask2 = cpumask_bits(andmask)[0] & APIC_ALL_CPUS;
+
+	return mask1 & mask2;
+}
+
+static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+struct apic apic_flat =  {
+	.name				= "flat",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
+	.apic_id_registered		= flat_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	.irq_dest_mode			= 1, /* logical */
+
+	.target_cpus			= flat_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.vector_allocation_domain	= flat_vector_allocation_domain,
+	.init_apic_ldr			= flat_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= flat_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= flat_get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFu << 24,
+
+	.cpu_mask_to_apicid		= flat_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= flat_send_IPI_mask,
+	.send_IPI_mask_allbutself	= flat_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= flat_send_IPI_allbutself,
+	.send_IPI_all			= flat_send_IPI_all,
+	.send_IPI_self			= apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
+
+/*
+ * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * We cannot use logical delivery in this case because the mask
+ * overflows, so use physical mode.
+ */
+static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+#ifdef CONFIG_ACPI
+	/*
+	 * Quirk: some x86_64 machines can only use physical APIC mode
+	 * regardless of how many processors are present (x86_64 ES7000
+	 * is an example).
+	 */
+	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
+		printk(KERN_DEBUG "system APIC only can use physical flat");
+		return 1;
+	}
+#endif
+
+	return 0;
+}
+
+static const struct cpumask *physflat_target_cpus(void)
+{
+	return cpu_online_mask;
+}
+
+static void physflat_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
+{
+	default_send_IPI_mask_sequence_phys(cpumask, vector);
+}
+
+static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
+					      int vector)
+{
+	default_send_IPI_mask_allbutself_phys(cpumask, vector);
+}
+
+static void physflat_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
+}
+
+static void physflat_send_IPI_all(int vector)
+{
+	physflat_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static unsigned int physflat_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = cpumask_first(cpumask);
+	if ((unsigned)cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int
+physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+				const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+	if (cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+
+	return BAD_APICID;
+}
+
+struct apic apic_physflat =  {
+
+	.name				= "physical flat",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
+	.apic_id_registered		= flat_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= 0, /* physical */
+
+	.target_cpus			= physflat_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.vector_allocation_domain	= physflat_vector_allocation_domain,
+	/* not needed, but shouldn't hurt: */
+	.init_apic_ldr			= flat_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= flat_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= flat_get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFu << 24,
+
+	.cpu_mask_to_apicid		= physflat_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= physflat_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= physflat_send_IPI_mask,
+	.send_IPI_mask_allbutself	= physflat_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= physflat_send_IPI_allbutself,
+	.send_IPI_all			= physflat_send_IPI_all,
+	.send_IPI_self			= apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
new file mode 100644
index 00000000000..00e6071cefc
--- /dev/null
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -0,0 +1,4160 @@
+/*
+ *	Intel IO-APIC support for multi-Pentium hosts.
+ *
+ *	Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
+ *
+ *	Many thanks to Stig Venaas for trying out countless experimental
+ *	patches and reporting/debugging problems patiently!
+ *
+ *	(c) 1999, Multiple IO-APIC support, developed by
+ *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
+ *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
+ *	further tested and cleaned up by Zach Brown <zab@redhat.com>
+ *	and Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
+ *					thanks to Eric Gilmore
+ *					and Rolf G. Tews
+ *					for testing these extensively
+ *	Paul Diefenbaugh	:	Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/mc146818rtc.h>
+#include <linux/compiler.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/msi.h>
+#include <linux/htirq.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+#include <linux/jiffies.h>	/* time_after() */
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+#include <linux/bootmem.h>
+#include <linux/dmar.h>
+#include <linux/hpet.h>
+
+#include <asm/idle.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/cpu.h>
+#include <asm/desc.h>
+#include <asm/proto.h>
+#include <asm/acpi.h>
+#include <asm/dma.h>
+#include <asm/timer.h>
+#include <asm/i8259.h>
+#include <asm/nmi.h>
+#include <asm/msidef.h>
+#include <asm/hypertransport.h>
+#include <asm/setup.h>
+#include <asm/irq_remapping.h>
+#include <asm/hpet.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_irq.h>
+
+#include <asm/apic.h>
+
+#define __apicdebuginit(type) static type __init
+
+/*
+ *      Is the SiS APIC rmw bug present ?
+ *      -1 = don't know, 0 = no, 1 = yes
+ */
+int sis_apic_bug = -1;
+
+static DEFINE_SPINLOCK(ioapic_lock);
+static DEFINE_SPINLOCK(vector_lock);
+
+/*
+ * # of IRQ routing registers
+ */
+int nr_ioapic_registers[MAX_IO_APICS];
+
+/* I/O APIC entries */
+struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
+int skip_ioapic_setup;
+
+void arch_disable_smp_support(void)
+{
+#ifdef CONFIG_PCI
+	noioapicquirk = 1;
+	noioapicreroute = -1;
+#endif
+	skip_ioapic_setup = 1;
+}
+
+static int __init parse_noapic(char *str)
+{
+	/* disable IO-APIC */
+	arch_disable_smp_support();
+	return 0;
+}
+early_param("noapic", parse_noapic);
+
+struct irq_pin_list;
+
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * the indexing order of this array favors 1:1 mappings
+ * between pins and IRQs.
+ */
+
+struct irq_pin_list {
+	int apic, pin;
+	struct irq_pin_list *next;
+};
+
+static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
+{
+	struct irq_pin_list *pin;
+	int node;
+
+	node = cpu_to_node(cpu);
+
+	pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
+
+	return pin;
+}
+
+struct irq_cfg {
+	struct irq_pin_list *irq_2_pin;
+	cpumask_var_t domain;
+	cpumask_var_t old_domain;
+	unsigned move_cleanup_count;
+	u8 vector;
+	u8 move_in_progress : 1;
+#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
+	u8 move_desc_pending : 1;
+#endif
+};
+
+/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
+#ifdef CONFIG_SPARSE_IRQ
+static struct irq_cfg irq_cfgx[] = {
+#else
+static struct irq_cfg irq_cfgx[NR_IRQS] = {
+#endif
+	[0]  = { .vector = IRQ0_VECTOR,  },
+	[1]  = { .vector = IRQ1_VECTOR,  },
+	[2]  = { .vector = IRQ2_VECTOR,  },
+	[3]  = { .vector = IRQ3_VECTOR,  },
+	[4]  = { .vector = IRQ4_VECTOR,  },
+	[5]  = { .vector = IRQ5_VECTOR,  },
+	[6]  = { .vector = IRQ6_VECTOR,  },
+	[7]  = { .vector = IRQ7_VECTOR,  },
+	[8]  = { .vector = IRQ8_VECTOR,  },
+	[9]  = { .vector = IRQ9_VECTOR,  },
+	[10] = { .vector = IRQ10_VECTOR, },
+	[11] = { .vector = IRQ11_VECTOR, },
+	[12] = { .vector = IRQ12_VECTOR, },
+	[13] = { .vector = IRQ13_VECTOR, },
+	[14] = { .vector = IRQ14_VECTOR, },
+	[15] = { .vector = IRQ15_VECTOR, },
+};
+
+int __init arch_early_irq_init(void)
+{
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+	int count;
+	int i;
+
+	cfg = irq_cfgx;
+	count = ARRAY_SIZE(irq_cfgx);
+
+	for (i = 0; i < count; i++) {
+		desc = irq_to_desc(i);
+		desc->chip_data = &cfg[i];
+		alloc_bootmem_cpumask_var(&cfg[i].domain);
+		alloc_bootmem_cpumask_var(&cfg[i].old_domain);
+		if (i < NR_IRQS_LEGACY)
+			cpumask_setall(cfg[i].domain);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SPARSE_IRQ
+static struct irq_cfg *irq_cfg(unsigned int irq)
+{
+	struct irq_cfg *cfg = NULL;
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+	if (desc)
+		cfg = desc->chip_data;
+
+	return cfg;
+}
+
+static struct irq_cfg *get_one_free_irq_cfg(int cpu)
+{
+	struct irq_cfg *cfg;
+	int node;
+
+	node = cpu_to_node(cpu);
+
+	cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
+	if (cfg) {
+		if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
+			kfree(cfg);
+			cfg = NULL;
+		} else if (!alloc_cpumask_var_node(&cfg->old_domain,
+							  GFP_ATOMIC, node)) {
+			free_cpumask_var(cfg->domain);
+			kfree(cfg);
+			cfg = NULL;
+		} else {
+			cpumask_clear(cfg->domain);
+			cpumask_clear(cfg->old_domain);
+		}
+	}
+
+	return cfg;
+}
+
+int arch_init_chip_data(struct irq_desc *desc, int cpu)
+{
+	struct irq_cfg *cfg;
+
+	cfg = desc->chip_data;
+	if (!cfg) {
+		desc->chip_data = get_one_free_irq_cfg(cpu);
+		if (!desc->chip_data) {
+			printk(KERN_ERR "can not alloc irq_cfg\n");
+			BUG_ON(1);
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
+
+static void
+init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
+{
+	struct irq_pin_list *old_entry, *head, *tail, *entry;
+
+	cfg->irq_2_pin = NULL;
+	old_entry = old_cfg->irq_2_pin;
+	if (!old_entry)
+		return;
+
+	entry = get_one_free_irq_2_pin(cpu);
+	if (!entry)
+		return;
+
+	entry->apic	= old_entry->apic;
+	entry->pin	= old_entry->pin;
+	head		= entry;
+	tail		= entry;
+	old_entry	= old_entry->next;
+	while (old_entry) {
+		entry = get_one_free_irq_2_pin(cpu);
+		if (!entry) {
+			entry = head;
+			while (entry) {
+				head = entry->next;
+				kfree(entry);
+				entry = head;
+			}
+			/* still use the old one */
+			return;
+		}
+		entry->apic	= old_entry->apic;
+		entry->pin	= old_entry->pin;
+		tail->next	= entry;
+		tail		= entry;
+		old_entry	= old_entry->next;
+	}
+
+	tail->next = NULL;
+	cfg->irq_2_pin = head;
+}
+
+static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg)
+{
+	struct irq_pin_list *entry, *next;
+
+	if (old_cfg->irq_2_pin == cfg->irq_2_pin)
+		return;
+
+	entry = old_cfg->irq_2_pin;
+
+	while (entry) {
+		next = entry->next;
+		kfree(entry);
+		entry = next;
+	}
+	old_cfg->irq_2_pin = NULL;
+}
+
+void arch_init_copy_chip_data(struct irq_desc *old_desc,
+				 struct irq_desc *desc, int cpu)
+{
+	struct irq_cfg *cfg;
+	struct irq_cfg *old_cfg;
+
+	cfg = get_one_free_irq_cfg(cpu);
+
+	if (!cfg)
+		return;
+
+	desc->chip_data = cfg;
+
+	old_cfg = old_desc->chip_data;
+
+	memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
+
+	init_copy_irq_2_pin(old_cfg, cfg, cpu);
+}
+
+static void free_irq_cfg(struct irq_cfg *old_cfg)
+{
+	kfree(old_cfg);
+}
+
+void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
+{
+	struct irq_cfg *old_cfg, *cfg;
+
+	old_cfg = old_desc->chip_data;
+	cfg = desc->chip_data;
+
+	if (old_cfg == cfg)
+		return;
+
+	if (old_cfg) {
+		free_irq_2_pin(old_cfg, cfg);
+		free_irq_cfg(old_cfg);
+		old_desc->chip_data = NULL;
+	}
+}
+
+static void
+set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+	struct irq_cfg *cfg = desc->chip_data;
+
+	if (!cfg->move_in_progress) {
+		/* it means that domain is not changed */
+		if (!cpumask_intersects(desc->affinity, mask))
+			cfg->move_desc_pending = 1;
+	}
+}
+#endif
+
+#else
+static struct irq_cfg *irq_cfg(unsigned int irq)
+{
+	return irq < nr_irqs ? irq_cfgx + irq : NULL;
+}
+
+#endif
+
+#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
+static inline void
+set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+}
+#endif
+
+struct io_apic {
+	unsigned int index;
+	unsigned int unused[3];
+	unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+		+ (mp_ioapics[idx].apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(reg, &io_apic->index);
+	return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+	writel(reg, &io_apic->index);
+	writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ *
+ * Older SiS APIC requires we rewrite the index register
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	struct io_apic __iomem *io_apic = io_apic_base(apic);
+
+	if (sis_apic_bug)
+		writel(reg, &io_apic->index);
+	writel(value, &io_apic->data);
+}
+
+static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
+{
+	struct irq_pin_list *entry;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	entry = cfg->irq_2_pin;
+	for (;;) {
+		unsigned int reg;
+		int pin;
+
+		if (!entry)
+			break;
+		pin = entry->pin;
+		reg = io_apic_read(entry->apic, 0x10 + pin*2);
+		/* Is the remote IRR bit set? */
+		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
+			spin_unlock_irqrestore(&ioapic_lock, flags);
+			return true;
+		}
+		if (!entry->next)
+			break;
+		entry = entry->next;
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return false;
+}
+
+union entry_union {
+	struct { u32 w1, w2; };
+	struct IO_APIC_route_entry entry;
+};
+
+static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
+{
+	union entry_union eu;
+	unsigned long flags;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
+	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+	return eu.entry;
+}
+
+/*
+ * When we write a new IO APIC routing entry, we need to write the high
+ * word first! If the mask bit in the low word is clear, we will enable
+ * the interrupt, and we need to make sure the entry is fully populated
+ * before that happens.
+ */
+static void
+__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+	union entry_union eu;
+	eu.entry = e;
+	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+}
+
+void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__ioapic_write_entry(apic, pin, e);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * When we mask an IO APIC routing entry, we need to write the low
+ * word first, in order to set the mask bit before we change the
+ * high bits!
+ */
+static void ioapic_mask_entry(int apic, int pin)
+{
+	unsigned long flags;
+	union entry_union eu = { .entry.mask = 1 };
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void send_cleanup_vector(struct irq_cfg *cfg)
+{
+	cpumask_var_t cleanup_mask;
+
+	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
+		unsigned int i;
+		cfg->move_cleanup_count = 0;
+		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+			cfg->move_cleanup_count++;
+		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
+	} else {
+		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
+		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		free_cpumask_var(cleanup_mask);
+	}
+	cfg->move_in_progress = 0;
+}
+
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
+{
+	int apic, pin;
+	struct irq_pin_list *entry;
+	u8 vector = cfg->vector;
+
+	entry = cfg->irq_2_pin;
+	for (;;) {
+		unsigned int reg;
+
+		if (!entry)
+			break;
+
+		apic = entry->apic;
+		pin = entry->pin;
+#ifdef CONFIG_INTR_REMAP
+		/*
+		 * With interrupt-remapping, destination information comes
+		 * from interrupt-remapping table entry.
+		 */
+		if (!irq_remapped(irq))
+			io_apic_write(apic, 0x11 + pin*2, dest);
+#else
+		io_apic_write(apic, 0x11 + pin*2, dest);
+#endif
+		reg = io_apic_read(apic, 0x10 + pin*2);
+		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+		reg |= vector;
+		io_apic_modify(apic, 0x10 + pin*2, reg);
+		if (!entry->next)
+			break;
+		entry = entry->next;
+	}
+}
+
+static int
+assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
+
+/*
+ * Either sets desc->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
+ * leaves desc->affinity untouched.
+ */
+static unsigned int
+set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
+{
+	struct irq_cfg *cfg;
+	unsigned int irq;
+
+	if (!cpumask_intersects(mask, cpu_online_mask))
+		return BAD_APICID;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+	if (assign_irq_vector(irq, cfg, mask))
+		return BAD_APICID;
+
+	cpumask_and(desc->affinity, cfg->domain, mask);
+	set_extra_move_desc(desc, mask);
+
+	return apic->cpu_mask_to_apicid_and(desc->affinity, cpu_online_mask);
+}
+
+static void
+set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	unsigned int dest;
+	unsigned int irq;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	dest = set_desc_affinity(desc, mask);
+	if (dest != BAD_APICID) {
+		/* Only the high 8 bits are valid. */
+		dest = SET_APIC_LOGICAL_ID(dest);
+		__target_IO_APIC_irq(irq, dest, cfg);
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void
+set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+
+	set_ioapic_affinity_irq_desc(desc, mask);
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
+ * shared ISA-space IRQs, so we have to support them. We are super
+ * fast in the common case, and fast for shared ISA-space IRQs.
+ */
+static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
+{
+	struct irq_pin_list *entry;
+
+	entry = cfg->irq_2_pin;
+	if (!entry) {
+		entry = get_one_free_irq_2_pin(cpu);
+		if (!entry) {
+			printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
+					apic, pin);
+			return;
+		}
+		cfg->irq_2_pin = entry;
+		entry->apic = apic;
+		entry->pin = pin;
+		return;
+	}
+
+	while (entry->next) {
+		/* not again, please */
+		if (entry->apic == apic && entry->pin == pin)
+			return;
+
+		entry = entry->next;
+	}
+
+	entry->next = get_one_free_irq_2_pin(cpu);
+	entry = entry->next;
+	entry->apic = apic;
+	entry->pin = pin;
+}
+
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
+				      int oldapic, int oldpin,
+				      int newapic, int newpin)
+{
+	struct irq_pin_list *entry = cfg->irq_2_pin;
+	int replaced = 0;
+
+	while (entry) {
+		if (entry->apic == oldapic && entry->pin == oldpin) {
+			entry->apic = newapic;
+			entry->pin = newpin;
+			replaced = 1;
+			/* every one is different, right? */
+			break;
+		}
+		entry = entry->next;
+	}
+
+	/* why? call replace before add? */
+	if (!replaced)
+		add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
+}
+
+static inline void io_apic_modify_irq(struct irq_cfg *cfg,
+				int mask_and, int mask_or,
+				void (*final)(struct irq_pin_list *entry))
+{
+	int pin;
+	struct irq_pin_list *entry;
+
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+		unsigned int reg;
+		pin = entry->pin;
+		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
+		reg &= mask_and;
+		reg |= mask_or;
+		io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
+		if (final)
+			final(entry);
+	}
+}
+
+static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
+{
+	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
+}
+
+#ifdef CONFIG_X86_64
+static void io_apic_sync(struct irq_pin_list *entry)
+{
+	/*
+	 * Synchronize the IO-APIC and the CPU by doing
+	 * a dummy read from the IO-APIC
+	 */
+	struct io_apic __iomem *io_apic;
+	io_apic = io_apic_base(entry->apic);
+	readl(&io_apic->data);
+}
+
+static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
+{
+	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
+}
+#else /* CONFIG_X86_32 */
+static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
+{
+	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
+}
+
+static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
+{
+	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
+			IO_APIC_REDIR_MASKED, NULL);
+}
+
+static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
+{
+	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
+			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
+}
+#endif /* CONFIG_X86_32 */
+
+static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
+{
+	struct irq_cfg *cfg = desc->chip_data;
+	unsigned long flags;
+
+	BUG_ON(!cfg);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__mask_IO_APIC_irq(cfg);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void unmask_IO_APIC_irq_desc(struct irq_desc *desc)
+{
+	struct irq_cfg *cfg = desc->chip_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__unmask_IO_APIC_irq(cfg);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void mask_IO_APIC_irq(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	mask_IO_APIC_irq_desc(desc);
+}
+static void unmask_IO_APIC_irq(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	unmask_IO_APIC_irq_desc(desc);
+}
+
+static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
+{
+	struct IO_APIC_route_entry entry;
+
+	/* Check delivery_mode to be sure we're not clearing an SMI pin */
+	entry = ioapic_read_entry(apic, pin);
+	if (entry.delivery_mode == dest_SMI)
+		return;
+	/*
+	 * Disable it in the IO-APIC irq-routing table:
+	 */
+	ioapic_mask_entry(apic, pin);
+}
+
+static void clear_IO_APIC (void)
+{
+	int apic, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+			clear_IO_APIC_pin(apic, pin);
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
+ * specific CPU-side IRQs.
+ */
+
+#define MAX_PIRQS 8
+static int pirq_entries[MAX_PIRQS] = {
+	[0 ... MAX_PIRQS - 1] = -1
+};
+
+static int __init ioapic_pirq_setup(char *str)
+{
+	int i, max;
+	int ints[MAX_PIRQS+1];
+
+	get_options(str, ARRAY_SIZE(ints), ints);
+
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"PIRQ redirection, working around broken MP-BIOS.\n");
+	max = MAX_PIRQS;
+	if (ints[0] < MAX_PIRQS)
+		max = ints[0];
+
+	for (i = 0; i < max; i++) {
+		apic_printk(APIC_VERBOSE, KERN_DEBUG
+				"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
+		/*
+		 * PIRQs are mapped upside down, usually.
+		 */
+		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
+	}
+	return 1;
+}
+
+__setup("pirq=", ioapic_pirq_setup);
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_INTR_REMAP
+/* I/O APIC RTE contents at the OS boot up */
+static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
+
+/*
+ * Saves and masks all the unmasked IO-APIC RTE's
+ */
+int save_mask_IO_APIC_setup(void)
+{
+	union IO_APIC_reg_01 reg_01;
+	unsigned long flags;
+	int apic, pin;
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_01.raw = io_apic_read(apic, 1);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		early_ioapic_entries[apic] =
+			kzalloc(sizeof(struct IO_APIC_route_entry) *
+				nr_ioapic_registers[apic], GFP_KERNEL);
+		if (!early_ioapic_entries[apic])
+			goto nomem;
+	}
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			struct IO_APIC_route_entry entry;
+
+			entry = early_ioapic_entries[apic][pin] =
+				ioapic_read_entry(apic, pin);
+			if (!entry.mask) {
+				entry.mask = 1;
+				ioapic_write_entry(apic, pin, entry);
+			}
+		}
+
+	return 0;
+
+nomem:
+	while (apic >= 0)
+		kfree(early_ioapic_entries[apic--]);
+	memset(early_ioapic_entries, 0,
+		ARRAY_SIZE(early_ioapic_entries));
+
+	return -ENOMEM;
+}
+
+void restore_IO_APIC_setup(void)
+{
+	int apic, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		if (!early_ioapic_entries[apic])
+			break;
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+			ioapic_write_entry(apic, pin,
+					   early_ioapic_entries[apic][pin]);
+		kfree(early_ioapic_entries[apic]);
+		early_ioapic_entries[apic] = NULL;
+	}
+}
+
+void reinit_intr_remapped_IO_APIC(int intr_remapping)
+{
+	/*
+	 * for now plain restore of previous settings.
+	 * TBD: In the case of OS enabling interrupt-remapping,
+	 * IO-APIC RTE's need to be setup to point to interrupt-remapping
+	 * table entries. for now, do a plain restore, and wait for
+	 * the setup_IO_APIC_irqs() to do proper initialization.
+	 */
+	restore_IO_APIC_setup();
+}
+#endif
+
+/*
+ * Find the IRQ entry number of a certain pin.
+ */
+static int find_irq_entry(int apic, int pin, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].irqtype == type &&
+		    (mp_irqs[i].dstapic == mp_ioapics[apic].apicid ||
+		     mp_irqs[i].dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].dstirq == pin)
+			return i;
+
+	return -1;
+}
+
+/*
+ * Find the pin to which IRQ[irq] (ISA) is connected
+ */
+static int __init find_isa_irq_pin(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].srcbus;
+
+		if (test_bit(lbus, mp_bus_not_pci) &&
+		    (mp_irqs[i].irqtype == type) &&
+		    (mp_irqs[i].srcbusirq == irq))
+
+			return mp_irqs[i].dstirq;
+	}
+	return -1;
+}
+
+static int __init find_isa_irq_apic(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].srcbus;
+
+		if (test_bit(lbus, mp_bus_not_pci) &&
+		    (mp_irqs[i].irqtype == type) &&
+		    (mp_irqs[i].srcbusirq == irq))
+			break;
+	}
+	if (i < mp_irq_entries) {
+		int apic;
+		for(apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic)
+				return apic;
+		}
+	}
+
+	return -1;
+}
+
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+static int pin_2_irq(int idx, int apic, int pin);
+
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
+{
+	int apic, i, best_guess = -1;
+
+	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+		bus, slot, pin);
+	if (test_bit(bus, mp_bus_not_pci)) {
+		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+		return -1;
+	}
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].srcbus;
+
+		for (apic = 0; apic < nr_ioapics; apic++)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+			    mp_irqs[i].dstapic == MP_APIC_ALL)
+				break;
+
+		if (!test_bit(lbus, mp_bus_not_pci) &&
+		    !mp_irqs[i].irqtype &&
+		    (bus == lbus) &&
+		    (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+			if (!(apic || IO_APIC_IRQ(irq)))
+				continue;
+
+			if (pin == (mp_irqs[i].srcbusirq & 3))
+				return irq;
+			/*
+			 * Use the first all-but-pin matching entry as a
+			 * best-guess fuzzy result for broken mptables.
+			 */
+			if (best_guess < 0)
+				best_guess = irq;
+		}
+	}
+	return best_guess;
+}
+
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+/*
+ * EISA Edge/Level control register, ELCR
+ */
+static int EISA_ELCR(unsigned int irq)
+{
+	if (irq < NR_IRQS_LEGACY) {
+		unsigned int port = 0x4d0 + (irq >> 3);
+		return (inb(port) >> (irq & 7)) & 1;
+	}
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"Broken MPtable reports ISA irq %d\n", irq);
+	return 0;
+}
+
+#endif
+
+/* ISA interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_ISA_trigger(idx)	(0)
+#define default_ISA_polarity(idx)	(0)
+
+/* EISA interrupts are always polarity zero and can be edge or level
+ * trigger depending on the ELCR value.  If an interrupt is listed as
+ * EISA conforming in the MP table, that means its trigger type must
+ * be read in from the ELCR */
+
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
+#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
+
+/* PCI interrupts are always polarity one level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_PCI_trigger(idx)	(1)
+#define default_PCI_polarity(idx)	(1)
+
+/* MCA interrupts are always polarity zero level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_MCA_trigger(idx)	(1)
+#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
+
+static int MPBIOS_polarity(int idx)
+{
+	int bus = mp_irqs[idx].srcbus;
+	int polarity;
+
+	/*
+	 * Determine IRQ line polarity (high active or low active):
+	 */
+	switch (mp_irqs[idx].irqflag & 3)
+	{
+		case 0: /* conforms, ie. bus-type dependent polarity */
+			if (test_bit(bus, mp_bus_not_pci))
+				polarity = default_ISA_polarity(idx);
+			else
+				polarity = default_PCI_polarity(idx);
+			break;
+		case 1: /* high active */
+		{
+			polarity = 0;
+			break;
+		}
+		case 2: /* reserved */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			polarity = 1;
+			break;
+		}
+		case 3: /* low active */
+		{
+			polarity = 1;
+			break;
+		}
+		default: /* invalid */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			polarity = 1;
+			break;
+		}
+	}
+	return polarity;
+}
+
+static int MPBIOS_trigger(int idx)
+{
+	int bus = mp_irqs[idx].srcbus;
+	int trigger;
+
+	/*
+	 * Determine IRQ trigger mode (edge or level sensitive):
+	 */
+	switch ((mp_irqs[idx].irqflag>>2) & 3)
+	{
+		case 0: /* conforms, ie. bus-type dependent */
+			if (test_bit(bus, mp_bus_not_pci))
+				trigger = default_ISA_trigger(idx);
+			else
+				trigger = default_PCI_trigger(idx);
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+			switch (mp_bus_id_to_type[bus]) {
+				case MP_BUS_ISA: /* ISA pin */
+				{
+					/* set before the switch */
+					break;
+				}
+				case MP_BUS_EISA: /* EISA pin */
+				{
+					trigger = default_EISA_trigger(idx);
+					break;
+				}
+				case MP_BUS_PCI: /* PCI pin */
+				{
+					/* set before the switch */
+					break;
+				}
+				case MP_BUS_MCA: /* MCA pin */
+				{
+					trigger = default_MCA_trigger(idx);
+					break;
+				}
+				default:
+				{
+					printk(KERN_WARNING "broken BIOS!!\n");
+					trigger = 1;
+					break;
+				}
+			}
+#endif
+			break;
+		case 1: /* edge */
+		{
+			trigger = 0;
+			break;
+		}
+		case 2: /* reserved */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			trigger = 1;
+			break;
+		}
+		case 3: /* level */
+		{
+			trigger = 1;
+			break;
+		}
+		default: /* invalid */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			trigger = 0;
+			break;
+		}
+	}
+	return trigger;
+}
+
+static inline int irq_polarity(int idx)
+{
+	return MPBIOS_polarity(idx);
+}
+
+static inline int irq_trigger(int idx)
+{
+	return MPBIOS_trigger(idx);
+}
+
+int (*ioapic_renumber_irq)(int ioapic, int irq);
+static int pin_2_irq(int idx, int apic, int pin)
+{
+	int irq, i;
+	int bus = mp_irqs[idx].srcbus;
+
+	/*
+	 * Debugging check, we are in big trouble if this message pops up!
+	 */
+	if (mp_irqs[idx].dstirq != pin)
+		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+
+	if (test_bit(bus, mp_bus_not_pci)) {
+		irq = mp_irqs[idx].srcbusirq;
+	} else {
+		/*
+		 * PCI IRQs are mapped in order
+		 */
+		i = irq = 0;
+		while (i < apic)
+			irq += nr_ioapic_registers[i++];
+		irq += pin;
+		/*
+                 * For MPS mode, so far only needed by ES7000 platform
+                 */
+		if (ioapic_renumber_irq)
+			irq = ioapic_renumber_irq(apic, irq);
+	}
+
+#ifdef CONFIG_X86_32
+	/*
+	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
+	 */
+	if ((pin >= 16) && (pin <= 23)) {
+		if (pirq_entries[pin-16] != -1) {
+			if (!pirq_entries[pin-16]) {
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						"disabling PIRQ%d\n", pin-16);
+			} else {
+				irq = pirq_entries[pin-16];
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						"using PIRQ%d -> IRQ %d\n",
+						pin-16, irq);
+			}
+		}
+	}
+#endif
+
+	return irq;
+}
+
+void lock_vector_lock(void)
+{
+	/* Used to the online set of cpus does not change
+	 * during assign_irq_vector.
+	 */
+	spin_lock(&vector_lock);
+}
+
+void unlock_vector_lock(void)
+{
+	spin_unlock(&vector_lock);
+}
+
+static int
+__assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+{
+	/*
+	 * NOTE! The local APIC isn't very good at handling
+	 * multiple interrupts at the same interrupt level.
+	 * As the interrupt level is determined by taking the
+	 * vector number and shifting that right by 4, we
+	 * want to spread these out a bit so that they don't
+	 * all fall in the same interrupt level.
+	 *
+	 * Also, we've got to be careful not to trash gate
+	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
+	 */
+	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+	unsigned int old_vector;
+	int cpu, err;
+	cpumask_var_t tmp_mask;
+
+	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+		return -EBUSY;
+
+	if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
+		return -ENOMEM;
+
+	old_vector = cfg->vector;
+	if (old_vector) {
+		cpumask_and(tmp_mask, mask, cpu_online_mask);
+		cpumask_and(tmp_mask, cfg->domain, tmp_mask);
+		if (!cpumask_empty(tmp_mask)) {
+			free_cpumask_var(tmp_mask);
+			return 0;
+		}
+	}
+
+	/* Only try and allocate irqs on cpus that are present */
+	err = -ENOSPC;
+	for_each_cpu_and(cpu, mask, cpu_online_mask) {
+		int new_cpu;
+		int vector, offset;
+
+		apic->vector_allocation_domain(cpu, tmp_mask);
+
+		vector = current_vector;
+		offset = current_offset;
+next:
+		vector += 8;
+		if (vector >= first_system_vector) {
+			/* If out of vectors on large boxen, must share them. */
+			offset = (offset + 1) % 8;
+			vector = FIRST_DEVICE_VECTOR + offset;
+		}
+		if (unlikely(current_vector == vector))
+			continue;
+
+		if (test_bit(vector, used_vectors))
+			goto next;
+
+		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
+			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
+				goto next;
+		/* Found one! */
+		current_vector = vector;
+		current_offset = offset;
+		if (old_vector) {
+			cfg->move_in_progress = 1;
+			cpumask_copy(cfg->old_domain, cfg->domain);
+		}
+		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
+			per_cpu(vector_irq, new_cpu)[vector] = irq;
+		cfg->vector = vector;
+		cpumask_copy(cfg->domain, tmp_mask);
+		err = 0;
+		break;
+	}
+	free_cpumask_var(tmp_mask);
+	return err;
+}
+
+static int
+assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+{
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	err = __assign_irq_vector(irq, cfg, mask);
+	spin_unlock_irqrestore(&vector_lock, flags);
+	return err;
+}
+
+static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
+{
+	int cpu, vector;
+
+	BUG_ON(!cfg->vector);
+
+	vector = cfg->vector;
+	for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
+		per_cpu(vector_irq, cpu)[vector] = -1;
+
+	cfg->vector = 0;
+	cpumask_clear(cfg->domain);
+
+	if (likely(!cfg->move_in_progress))
+		return;
+	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
+		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
+								vector++) {
+			if (per_cpu(vector_irq, cpu)[vector] != irq)
+				continue;
+			per_cpu(vector_irq, cpu)[vector] = -1;
+			break;
+		}
+	}
+	cfg->move_in_progress = 0;
+}
+
+void __setup_vector_irq(int cpu)
+{
+	/* Initialize vector_irq on a new cpu */
+	/* This function must be called with vector_lock held */
+	int irq, vector;
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+
+	/* Mark the inuse vectors */
+	for_each_irq_desc(irq, desc) {
+		cfg = desc->chip_data;
+		if (!cpumask_test_cpu(cpu, cfg->domain))
+			continue;
+		vector = cfg->vector;
+		per_cpu(vector_irq, cpu)[vector] = irq;
+	}
+	/* Mark the free vectors */
+	for (vector = 0; vector < NR_VECTORS; ++vector) {
+		irq = per_cpu(vector_irq, cpu)[vector];
+		if (irq < 0)
+			continue;
+
+		cfg = irq_cfg(irq);
+		if (!cpumask_test_cpu(cpu, cfg->domain))
+			per_cpu(vector_irq, cpu)[vector] = -1;
+	}
+}
+
+static struct irq_chip ioapic_chip;
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip;
+#endif
+
+#define IOAPIC_AUTO     -1
+#define IOAPIC_EDGE     0
+#define IOAPIC_LEVEL    1
+
+#ifdef CONFIG_X86_32
+static inline int IO_APIC_irq_trigger(int irq)
+{
+	int apic, idx, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			idx = find_irq_entry(apic, pin, mp_INT);
+			if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
+				return irq_trigger(idx);
+		}
+	}
+	/*
+         * nonexistent IRQs are edge default
+         */
+	return 0;
+}
+#else
+static inline int IO_APIC_irq_trigger(int irq)
+{
+	return 1;
+}
+#endif
+
+static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long trigger)
+{
+
+	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+	    trigger == IOAPIC_LEVEL)
+		desc->status |= IRQ_LEVEL;
+	else
+		desc->status &= ~IRQ_LEVEL;
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		desc->status |= IRQ_MOVE_PCNTXT;
+		if (trigger)
+			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+						      handle_fasteoi_irq,
+						     "fasteoi");
+		else
+			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+						      handle_edge_irq, "edge");
+		return;
+	}
+#endif
+	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+	    trigger == IOAPIC_LEVEL)
+		set_irq_chip_and_handler_name(irq, &ioapic_chip,
+					      handle_fasteoi_irq,
+					      "fasteoi");
+	else
+		set_irq_chip_and_handler_name(irq, &ioapic_chip,
+					      handle_edge_irq, "edge");
+}
+
+int setup_ioapic_entry(int apic_id, int irq,
+		       struct IO_APIC_route_entry *entry,
+		       unsigned int destination, int trigger,
+		       int polarity, int vector)
+{
+	/*
+	 * add it to the IO-APIC irq-routing table:
+	 */
+	memset(entry,0,sizeof(*entry));
+
+#ifdef CONFIG_INTR_REMAP
+	if (intr_remapping_enabled) {
+		struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
+		struct irte irte;
+		struct IR_IO_APIC_route_entry *ir_entry =
+			(struct IR_IO_APIC_route_entry *) entry;
+		int index;
+
+		if (!iommu)
+			panic("No mapping iommu for ioapic %d\n", apic_id);
+
+		index = alloc_irte(iommu, irq, 1);
+		if (index < 0)
+			panic("Failed to allocate IRTE for ioapic %d\n", apic_id);
+
+		memset(&irte, 0, sizeof(irte));
+
+		irte.present = 1;
+		irte.dst_mode = apic->irq_dest_mode;
+		irte.trigger_mode = trigger;
+		irte.dlvry_mode = apic->irq_delivery_mode;
+		irte.vector = vector;
+		irte.dest_id = IRTE_DEST(destination);
+
+		modify_irte(irq, &irte);
+
+		ir_entry->index2 = (index >> 15) & 0x1;
+		ir_entry->zero = 0;
+		ir_entry->format = 1;
+		ir_entry->index = (index & 0x7fff);
+	} else
+#endif
+	{
+		entry->delivery_mode = apic->irq_delivery_mode;
+		entry->dest_mode = apic->irq_dest_mode;
+		entry->dest = destination;
+	}
+
+	entry->mask = 0;				/* enable IRQ */
+	entry->trigger = trigger;
+	entry->polarity = polarity;
+	entry->vector = vector;
+
+	/* Mask level triggered irqs.
+	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+	 */
+	if (trigger)
+		entry->mask = 1;
+	return 0;
+}
+
+static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq_desc *desc,
+			      int trigger, int polarity)
+{
+	struct irq_cfg *cfg;
+	struct IO_APIC_route_entry entry;
+	unsigned int dest;
+
+	if (!IO_APIC_IRQ(irq))
+		return;
+
+	cfg = desc->chip_data;
+
+	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
+		return;
+
+	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+
+	apic_printk(APIC_VERBOSE,KERN_DEBUG
+		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
+		    "IRQ %d Mode:%i Active:%i)\n",
+		    apic_id, mp_ioapics[apic_id].apicid, pin, cfg->vector,
+		    irq, trigger, polarity);
+
+
+	if (setup_ioapic_entry(mp_ioapics[apic_id].apicid, irq, &entry,
+			       dest, trigger, polarity, cfg->vector)) {
+		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
+		       mp_ioapics[apic_id].apicid, pin);
+		__clear_irq_vector(irq, cfg);
+		return;
+	}
+
+	ioapic_register_intr(irq, desc, trigger);
+	if (irq < NR_IRQS_LEGACY)
+		disable_8259A_irq(irq);
+
+	ioapic_write_entry(apic_id, pin, entry);
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+	int apic_id, pin, idx, irq;
+	int notcon = 0;
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+	int cpu = boot_cpu_id;
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+
+	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
+		for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+
+			idx = find_irq_entry(apic_id, pin, mp_INT);
+			if (idx == -1) {
+				if (!notcon) {
+					notcon = 1;
+					apic_printk(APIC_VERBOSE,
+						KERN_DEBUG " %d-%d",
+						mp_ioapics[apic_id].apicid, pin);
+				} else
+					apic_printk(APIC_VERBOSE, " %d-%d",
+						mp_ioapics[apic_id].apicid, pin);
+				continue;
+			}
+			if (notcon) {
+				apic_printk(APIC_VERBOSE,
+					" (apicid-pin) not connected\n");
+				notcon = 0;
+			}
+
+			irq = pin_2_irq(idx, apic_id, pin);
+
+			/*
+			 * Skip the timer IRQ if there's a quirk handler
+			 * installed and if it returns 1:
+			 */
+			if (apic->multi_timer_check &&
+					apic->multi_timer_check(apic_id, irq))
+				continue;
+
+			desc = irq_to_desc_alloc_cpu(irq, cpu);
+			if (!desc) {
+				printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+				continue;
+			}
+			cfg = desc->chip_data;
+			add_pin_to_irq_cpu(cfg, cpu, apic_id, pin);
+
+			setup_IO_APIC_irq(apic_id, pin, irq, desc,
+					irq_trigger(idx), irq_polarity(idx));
+		}
+	}
+
+	if (notcon)
+		apic_printk(APIC_VERBOSE,
+			" (apicid-pin) not connected\n");
+}
+
+/*
+ * Set up the timer pin, possibly with the 8259A-master behind.
+ */
+static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
+					int vector)
+{
+	struct IO_APIC_route_entry entry;
+
+#ifdef CONFIG_INTR_REMAP
+	if (intr_remapping_enabled)
+		return;
+#endif
+
+	memset(&entry, 0, sizeof(entry));
+
+	/*
+	 * We use logical delivery to get the timer IRQ
+	 * to the first CPU.
+	 */
+	entry.dest_mode = apic->irq_dest_mode;
+	entry.mask = 0;			/* don't mask IRQ for edge */
+	entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus());
+	entry.delivery_mode = apic->irq_delivery_mode;
+	entry.polarity = 0;
+	entry.trigger = 0;
+	entry.vector = vector;
+
+	/*
+	 * The timer IRQ doesn't have to know that behind the
+	 * scene we may have a 8259A-master in AEOI mode ...
+	 */
+	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
+
+	/*
+	 * Add it to the IO-APIC irq-routing table:
+	 */
+	ioapic_write_entry(apic_id, pin, entry);
+}
+
+
+__apicdebuginit(void) print_IO_APIC(void)
+{
+	int apic, i;
+	union IO_APIC_reg_00 reg_00;
+	union IO_APIC_reg_01 reg_01;
+	union IO_APIC_reg_02 reg_02;
+	union IO_APIC_reg_03 reg_03;
+	unsigned long flags;
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+	unsigned int irq;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+	for (i = 0; i < nr_ioapics; i++)
+		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
+		       mp_ioapics[i].apicid, nr_ioapic_registers[i]);
+
+	/*
+	 * We are a bit conservative about what we expect.  We have to
+	 * know about every hardware change ASAP.
+	 */
+	printk(KERN_INFO "testing the IO APIC.......................\n");
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(apic, 0);
+	reg_01.raw = io_apic_read(apic, 1);
+	if (reg_01.bits.version >= 0x10)
+		reg_02.raw = io_apic_read(apic, 2);
+	if (reg_01.bits.version >= 0x20)
+		reg_03.raw = io_apic_read(apic, 3);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	printk("\n");
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].apicid);
+	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
+	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
+	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
+	printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
+
+	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
+	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
+
+	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
+	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
+
+	/*
+	 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
+	 * but the value of reg_02 is read as the previous read register
+	 * value, so ignore it if reg_02 == reg_01.
+	 */
+	if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
+		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
+		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
+	}
+
+	/*
+	 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
+	 * or reg_03, but the value of reg_0[23] is read as the previous read
+	 * register value, so ignore it if reg_03 == reg_0[12].
+	 */
+	if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
+	    reg_03.raw != reg_01.raw) {
+		printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
+		printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
+	}
+
+	printk(KERN_DEBUG ".... IRQ redirection table:\n");
+
+	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
+			  " Stat Dmod Deli Vect:   \n");
+
+	for (i = 0; i <= reg_01.bits.entries; i++) {
+		struct IO_APIC_route_entry entry;
+
+		entry = ioapic_read_entry(apic, i);
+
+		printk(KERN_DEBUG " %02x %03X ",
+			i,
+			entry.dest
+		);
+
+		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
+			entry.mask,
+			entry.trigger,
+			entry.irr,
+			entry.polarity,
+			entry.delivery_status,
+			entry.dest_mode,
+			entry.delivery_mode,
+			entry.vector
+		);
+	}
+	}
+	printk(KERN_DEBUG "IRQ to pin mappings:\n");
+	for_each_irq_desc(irq, desc) {
+		struct irq_pin_list *entry;
+
+		cfg = desc->chip_data;
+		entry = cfg->irq_2_pin;
+		if (!entry)
+			continue;
+		printk(KERN_DEBUG "IRQ%d ", irq);
+		for (;;) {
+			printk("-> %d:%d", entry->apic, entry->pin);
+			if (!entry->next)
+				break;
+			entry = entry->next;
+		}
+		printk("\n");
+	}
+
+	printk(KERN_INFO ".................................... done.\n");
+
+	return;
+}
+
+__apicdebuginit(void) print_APIC_bitfield(int base)
+{
+	unsigned int v;
+	int i, j;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
+	for (i = 0; i < 8; i++) {
+		v = apic_read(base + i*0x10);
+		for (j = 0; j < 32; j++) {
+			if (v & (1<<j))
+				printk("1");
+			else
+				printk("0");
+		}
+		printk("\n");
+	}
+}
+
+__apicdebuginit(void) print_local_APIC(void *dummy)
+{
+	unsigned int v, ver, maxlvt;
+	u64 icr;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
+	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
+	v = apic_read(APIC_LVR);
+	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
+	ver = GET_APIC_VERSION(v);
+	maxlvt = lapic_get_maxlvt();
+
+	v = apic_read(APIC_TASKPRI);
+	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
+
+	if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
+		if (!APIC_XAPIC(ver)) {
+			v = apic_read(APIC_ARBPRI);
+			printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
+			       v & APIC_ARBPRI_MASK);
+		}
+		v = apic_read(APIC_PROCPRI);
+		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
+	}
+
+	/*
+	 * Remote read supported only in the 82489DX and local APIC for
+	 * Pentium processors.
+	 */
+	if (!APIC_INTEGRATED(ver) || maxlvt == 3) {
+		v = apic_read(APIC_RRR);
+		printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
+	}
+
+	v = apic_read(APIC_LDR);
+	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
+	if (!x2apic_enabled()) {
+		v = apic_read(APIC_DFR);
+		printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
+	}
+	v = apic_read(APIC_SPIV);
+	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
+
+	printk(KERN_DEBUG "... APIC ISR field:\n");
+	print_APIC_bitfield(APIC_ISR);
+	printk(KERN_DEBUG "... APIC TMR field:\n");
+	print_APIC_bitfield(APIC_TMR);
+	printk(KERN_DEBUG "... APIC IRR field:\n");
+	print_APIC_bitfield(APIC_IRR);
+
+	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
+		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
+			apic_write(APIC_ESR, 0);
+
+		v = apic_read(APIC_ESR);
+		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
+	}
+
+	icr = apic_icr_read();
+	printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
+	printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
+
+	v = apic_read(APIC_LVTT);
+	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
+
+	if (maxlvt > 3) {                       /* PC is LVT#4. */
+		v = apic_read(APIC_LVTPC);
+		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
+	}
+	v = apic_read(APIC_LVT0);
+	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
+	v = apic_read(APIC_LVT1);
+	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
+
+	if (maxlvt > 2) {			/* ERR is LVT#3. */
+		v = apic_read(APIC_LVTERR);
+		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
+	}
+
+	v = apic_read(APIC_TMICT);
+	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
+	v = apic_read(APIC_TMCCT);
+	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
+	v = apic_read(APIC_TDCR);
+	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+	printk("\n");
+}
+
+__apicdebuginit(void) print_all_local_APICs(void)
+{
+	int cpu;
+
+	preempt_disable();
+	for_each_online_cpu(cpu)
+		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	preempt_enable();
+}
+
+__apicdebuginit(void) print_PIC(void)
+{
+	unsigned int v;
+	unsigned long flags;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "\nprinting PIC contents\n");
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	v = inb(0xa1) << 8 | inb(0x21);
+	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
+
+	v = inb(0xa0) << 8 | inb(0x20);
+	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
+
+	outb(0x0b,0xa0);
+	outb(0x0b,0x20);
+	v = inb(0xa0) << 8 | inb(0x20);
+	outb(0x0a,0xa0);
+	outb(0x0a,0x20);
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
+
+	v = inb(0x4d1) << 8 | inb(0x4d0);
+	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
+}
+
+__apicdebuginit(int) print_all_ICs(void)
+{
+	print_PIC();
+	print_all_local_APICs();
+	print_IO_APIC();
+
+	return 0;
+}
+
+fs_initcall(print_all_ICs);
+
+
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
+void __init enable_IO_APIC(void)
+{
+	union IO_APIC_reg_01 reg_01;
+	int i8259_apic, i8259_pin;
+	int apic;
+	unsigned long flags;
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_01.raw = io_apic_read(apic, 1);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+	for(apic = 0; apic < nr_ioapics; apic++) {
+		int pin;
+		/* See if any of the pins is in ExtINT mode */
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			struct IO_APIC_route_entry entry;
+			entry = ioapic_read_entry(apic, pin);
+
+			/* If the interrupt line is enabled and in ExtInt mode
+			 * I have found the pin where the i8259 is connected.
+			 */
+			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+				ioapic_i8259.apic = apic;
+				ioapic_i8259.pin  = pin;
+				goto found_i8259;
+			}
+		}
+	}
+ found_i8259:
+	/* Look to see what if the MP table has reported the ExtINT */
+	/* If we could not find the appropriate pin by looking at the ioapic
+	 * the i8259 probably is not connected the ioapic but give the
+	 * mptable a chance anyway.
+	 */
+	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
+	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+	/* Trust the MP table if nothing is setup in the hardware */
+	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+		ioapic_i8259.pin  = i8259_pin;
+		ioapic_i8259.apic = i8259_apic;
+	}
+	/* Complain if the MP table and the hardware disagree */
+	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+	{
+		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
+	}
+
+	/*
+	 * Do not trust the IO-APIC being empty at bootup
+	 */
+	clear_IO_APIC();
+}
+
+/*
+ * Not an __init, needed by the reboot code
+ */
+void disable_IO_APIC(void)
+{
+	/*
+	 * Clear the IO-APIC before rebooting:
+	 */
+	clear_IO_APIC();
+
+	/*
+	 * If the i8259 is routed through an IOAPIC
+	 * Put that IOAPIC in virtual wire mode
+	 * so legacy interrupts can be delivered.
+	 */
+	if (ioapic_i8259.pin != -1) {
+		struct IO_APIC_route_entry entry;
+
+		memset(&entry, 0, sizeof(entry));
+		entry.mask            = 0; /* Enabled */
+		entry.trigger         = 0; /* Edge */
+		entry.irr             = 0;
+		entry.polarity        = 0; /* High */
+		entry.delivery_status = 0;
+		entry.dest_mode       = 0; /* Physical */
+		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
+		entry.vector          = 0;
+		entry.dest            = read_apic_id();
+
+		/*
+		 * Add it to the IO-APIC irq-routing table:
+		 */
+		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
+	}
+
+	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * function to set the IO-APIC physical IDs based on the
+ * values stored in the MPC table.
+ *
+ * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
+ */
+
+static void __init setup_ioapic_ids_from_mpc(void)
+{
+	union IO_APIC_reg_00 reg_00;
+	physid_mask_t phys_id_present_map;
+	int apic_id;
+	int i;
+	unsigned char old_id;
+	unsigned long flags;
+
+	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
+		return;
+
+	/*
+	 * Don't check I/O APIC IDs for xAPIC systems.  They have
+	 * no meaning without the serial APIC bus.
+	 */
+	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return;
+	/*
+	 * This is broken; anything with a real cpu count has to
+	 * circumvent this idiocy regardless.
+	 */
+	phys_id_present_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
+
+	/*
+	 * Set the IOAPIC ID to the value stored in the MPC table.
+	 */
+	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
+
+		/* Read the register 0 value */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_00.raw = io_apic_read(apic_id, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		old_id = mp_ioapics[apic_id].apicid;
+
+		if (mp_ioapics[apic_id].apicid >= get_physical_broadcast()) {
+			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
+				apic_id, mp_ioapics[apic_id].apicid);
+			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+				reg_00.bits.ID);
+			mp_ioapics[apic_id].apicid = reg_00.bits.ID;
+		}
+
+		/*
+		 * Sanity check, is the ID really free? Every APIC in a
+		 * system must have a unique ID or we get lots of nice
+		 * 'stuck on smp_invalidate_needed IPI wait' messages.
+		 */
+		if (apic->check_apicid_used(phys_id_present_map,
+					mp_ioapics[apic_id].apicid)) {
+			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
+				apic_id, mp_ioapics[apic_id].apicid);
+			for (i = 0; i < get_physical_broadcast(); i++)
+				if (!physid_isset(i, phys_id_present_map))
+					break;
+			if (i >= get_physical_broadcast())
+				panic("Max APIC ID exceeded!\n");
+			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+				i);
+			physid_set(i, phys_id_present_map);
+			mp_ioapics[apic_id].apicid = i;
+		} else {
+			physid_mask_t tmp;
+			tmp = apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
+			apic_printk(APIC_VERBOSE, "Setting %d in the "
+					"phys_id_present_map\n",
+					mp_ioapics[apic_id].apicid);
+			physids_or(phys_id_present_map, phys_id_present_map, tmp);
+		}
+
+
+		/*
+		 * We need to adjust the IRQ routing table
+		 * if the ID changed.
+		 */
+		if (old_id != mp_ioapics[apic_id].apicid)
+			for (i = 0; i < mp_irq_entries; i++)
+				if (mp_irqs[i].dstapic == old_id)
+					mp_irqs[i].dstapic
+						= mp_ioapics[apic_id].apicid;
+
+		/*
+		 * Read the right value from the MPC table and
+		 * write it into the ID register.
+		 */
+		apic_printk(APIC_VERBOSE, KERN_INFO
+			"...changing IO-APIC physical APIC ID to %d ...",
+			mp_ioapics[apic_id].apicid);
+
+		reg_00.bits.ID = mp_ioapics[apic_id].apicid;
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(apic_id, 0, reg_00.raw);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		/*
+		 * Sanity check
+		 */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_00.raw = io_apic_read(apic_id, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		if (reg_00.bits.ID != mp_ioapics[apic_id].apicid)
+			printk("could not set ID!\n");
+		else
+			apic_printk(APIC_VERBOSE, " ok.\n");
+	}
+}
+#endif
+
+int no_timer_check __initdata;
+
+static int __init notimercheck(char *s)
+{
+	no_timer_check = 1;
+	return 1;
+}
+__setup("no_timer_check", notimercheck);
+
+/*
+ * There is a nasty bug in some older SMP boards, their mptable lies
+ * about the timer IRQ. We do the following to work around the situation:
+ *
+ *	- timer IRQ defaults to IO-APIC IRQ
+ *	- if this function detects that timer IRQs are defunct, then we fall
+ *	  back to ISA timer IRQs
+ */
+static int __init timer_irq_works(void)
+{
+	unsigned long t1 = jiffies;
+	unsigned long flags;
+
+	if (no_timer_check)
+		return 1;
+
+	local_save_flags(flags);
+	local_irq_enable();
+	/* Let ten ticks pass... */
+	mdelay((10 * 1000) / HZ);
+	local_irq_restore(flags);
+
+	/*
+	 * Expect a few ticks at least, to be sure some possible
+	 * glue logic does not lock up after one or two first
+	 * ticks in a non-ExtINT mode.  Also the local APIC
+	 * might have cached one ExtINT interrupt.  Finally, at
+	 * least one tick may be lost due to delays.
+	 */
+
+	/* jiffies wrap? */
+	if (time_after(jiffies, t1 + 4))
+		return 1;
+	return 0;
+}
+
+/*
+ * In the SMP+IOAPIC case it might happen that there are an unspecified
+ * number of pending IRQ events unhandled. These cases are very rare,
+ * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
+ * better to do it this way as thus we do not have to be aware of
+ * 'pending' interrupts in the IRQ path, except at this point.
+ */
+/*
+ * Edge triggered needs to resend any interrupt
+ * that was delayed but this is now handled in the device
+ * independent code.
+ */
+
+/*
+ * Starting up a edge-triggered IO-APIC interrupt is
+ * nasty - we need to make sure that we get the edge.
+ * If it is already asserted for some reason, we need
+ * return 1 to indicate that is was pending.
+ *
+ * This is not complete - we should be able to fake
+ * an edge even if it isn't on the 8259A...
+ */
+
+static unsigned int startup_ioapic_irq(unsigned int irq)
+{
+	int was_pending = 0;
+	unsigned long flags;
+	struct irq_cfg *cfg;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	if (irq < NR_IRQS_LEGACY) {
+		disable_8259A_irq(irq);
+		if (i8259A_irq_pending(irq))
+			was_pending = 1;
+	}
+	cfg = irq_cfg(irq);
+	__unmask_IO_APIC_irq(cfg);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return was_pending;
+}
+
+#ifdef CONFIG_X86_64
+static int ioapic_retrigger_irq(unsigned int irq)
+{
+
+	struct irq_cfg *cfg = irq_cfg(irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector);
+	spin_unlock_irqrestore(&vector_lock, flags);
+
+	return 1;
+}
+#else
+static int ioapic_retrigger_irq(unsigned int irq)
+{
+	apic->send_IPI_self(irq_cfg(irq)->vector);
+
+	return 1;
+}
+#endif
+
+/*
+ * Level and edge triggered IO-APIC interrupts need different handling,
+ * so we use two separate IRQ descriptors. Edge triggered IRQs can be
+ * handled with the level-triggered descriptor, but that one has slightly
+ * more overhead. Level-triggered interrupts cannot be handled with the
+ * edge-triggered handler, without risking IRQ storms and other ugly
+ * races.
+ */
+
+#ifdef CONFIG_SMP
+
+#ifdef CONFIG_INTR_REMAP
+static void ir_irq_migration(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
+
+/*
+ * Migrate the IO-APIC irq in the presence of intr-remapping.
+ *
+ * For edge triggered, irq migration is a simple atomic update(of vector
+ * and cpu destination) of IRTE and flush the hardware cache.
+ *
+ * For level triggered, we need to modify the io-apic RTE aswell with the update
+ * vector information, along with modifying IRTE with vector and destination.
+ * So irq migration for level triggered is little  bit more complex compared to
+ * edge triggered migration. But the good news is, we use the same algorithm
+ * for level triggered migration as we have today, only difference being,
+ * we now initiate the irq migration from process context instead of the
+ * interrupt context.
+ *
+ * In future, when we do a directed EOI (combined with cpu EOI broadcast
+ * suppression) to the IO-APIC, level triggered irq migration will also be
+ * as simple as edge triggered migration and we can do the irq migration
+ * with a simple atomic update to IO-APIC RTE.
+ */
+static void
+migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+	struct irq_cfg *cfg;
+	struct irte irte;
+	int modify_ioapic_rte;
+	unsigned int dest;
+	unsigned long flags;
+	unsigned int irq;
+
+	if (!cpumask_intersects(mask, cpu_online_mask))
+		return;
+
+	irq = desc->irq;
+	if (get_irte(irq, &irte))
+		return;
+
+	cfg = desc->chip_data;
+	if (assign_irq_vector(irq, cfg, mask))
+		return;
+
+	set_extra_move_desc(desc, mask);
+
+	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
+
+	modify_ioapic_rte = desc->status & IRQ_LEVEL;
+	if (modify_ioapic_rte) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		__target_IO_APIC_irq(irq, dest, cfg);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+	}
+
+	irte.vector = cfg->vector;
+	irte.dest_id = IRTE_DEST(dest);
+
+	/*
+	 * Modified the IRTE and flushes the Interrupt entry cache.
+	 */
+	modify_irte(irq, &irte);
+
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	cpumask_copy(desc->affinity, mask);
+}
+
+static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
+{
+	int ret = -1;
+	struct irq_cfg *cfg = desc->chip_data;
+
+	mask_IO_APIC_irq_desc(desc);
+
+	if (io_apic_level_ack_pending(cfg)) {
+		/*
+		 * Interrupt in progress. Migrating irq now will change the
+		 * vector information in the IO-APIC RTE and that will confuse
+		 * the EOI broadcast performed by cpu.
+		 * So, delay the irq migration to the next instance.
+		 */
+		schedule_delayed_work(&ir_migration_work, 1);
+		goto unmask;
+	}
+
+	/* everthing is clear. we have right of way */
+	migrate_ioapic_irq_desc(desc, desc->pending_mask);
+
+	ret = 0;
+	desc->status &= ~IRQ_MOVE_PENDING;
+	cpumask_clear(desc->pending_mask);
+
+unmask:
+	unmask_IO_APIC_irq_desc(desc);
+
+	return ret;
+}
+
+static void ir_irq_migration(struct work_struct *work)
+{
+	unsigned int irq;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(irq, desc) {
+		if (desc->status & IRQ_MOVE_PENDING) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&desc->lock, flags);
+			if (!desc->chip->set_affinity ||
+			    !(desc->status & IRQ_MOVE_PENDING)) {
+				desc->status &= ~IRQ_MOVE_PENDING;
+				spin_unlock_irqrestore(&desc->lock, flags);
+				continue;
+			}
+
+			desc->chip->set_affinity(irq, desc->pending_mask);
+			spin_unlock_irqrestore(&desc->lock, flags);
+		}
+	}
+}
+
+/*
+ * Migrates the IRQ destination in the process context.
+ */
+static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+					    const struct cpumask *mask)
+{
+	if (desc->status & IRQ_LEVEL) {
+		desc->status |= IRQ_MOVE_PENDING;
+		cpumask_copy(desc->pending_mask, mask);
+		migrate_irq_remapped_level_desc(desc);
+		return;
+	}
+
+	migrate_ioapic_irq_desc(desc, mask);
+}
+static void set_ir_ioapic_affinity_irq(unsigned int irq,
+				       const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	set_ir_ioapic_affinity_irq_desc(desc, mask);
+}
+#endif
+
+asmlinkage void smp_irq_move_cleanup_interrupt(void)
+{
+	unsigned vector, me;
+
+	ack_APIC_irq();
+	exit_idle();
+	irq_enter();
+
+	me = smp_processor_id();
+	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+		unsigned int irq;
+		struct irq_desc *desc;
+		struct irq_cfg *cfg;
+		irq = __get_cpu_var(vector_irq)[vector];
+
+		if (irq == -1)
+			continue;
+
+		desc = irq_to_desc(irq);
+		if (!desc)
+			continue;
+
+		cfg = irq_cfg(irq);
+		spin_lock(&desc->lock);
+		if (!cfg->move_cleanup_count)
+			goto unlock;
+
+		if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
+			goto unlock;
+
+		__get_cpu_var(vector_irq)[vector] = -1;
+		cfg->move_cleanup_count--;
+unlock:
+		spin_unlock(&desc->lock);
+	}
+
+	irq_exit();
+}
+
+static void irq_complete_move(struct irq_desc **descp)
+{
+	struct irq_desc *desc = *descp;
+	struct irq_cfg *cfg = desc->chip_data;
+	unsigned vector, me;
+
+	if (likely(!cfg->move_in_progress)) {
+#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
+		if (likely(!cfg->move_desc_pending))
+			return;
+
+		/* domain has not changed, but affinity did */
+		me = smp_processor_id();
+		if (cpumask_test_cpu(me, desc->affinity)) {
+			*descp = desc = move_irq_desc(desc, me);
+			/* get the new one */
+			cfg = desc->chip_data;
+			cfg->move_desc_pending = 0;
+		}
+#endif
+		return;
+	}
+
+	vector = ~get_irq_regs()->orig_ax;
+	me = smp_processor_id();
+
+	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
+#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
+		*descp = desc = move_irq_desc(desc, me);
+		/* get the new one */
+		cfg = desc->chip_data;
+#endif
+		send_cleanup_vector(cfg);
+	}
+}
+#else
+static inline void irq_complete_move(struct irq_desc **descp) {}
+#endif
+
+#ifdef CONFIG_INTR_REMAP
+static void ack_x2apic_level(unsigned int irq)
+{
+	ack_x2APIC_irq();
+}
+
+static void ack_x2apic_edge(unsigned int irq)
+{
+	ack_x2APIC_irq();
+}
+
+#endif
+
+static void ack_apic_edge(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	irq_complete_move(&desc);
+	move_native_irq(irq);
+	ack_APIC_irq();
+}
+
+atomic_t irq_mis_count;
+
+static void ack_apic_level(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+#ifdef CONFIG_X86_32
+	unsigned long v;
+	int i;
+#endif
+	struct irq_cfg *cfg;
+	int do_unmask_irq = 0;
+
+	irq_complete_move(&desc);
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+	/* If we are moving the irq we need to mask it */
+	if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+		do_unmask_irq = 1;
+		mask_IO_APIC_irq_desc(desc);
+	}
+#endif
+
+#ifdef CONFIG_X86_32
+	/*
+	* It appears there is an erratum which affects at least version 0x11
+	* of I/O APIC (that's the 82093AA and cores integrated into various
+	* chipsets).  Under certain conditions a level-triggered interrupt is
+	* erroneously delivered as edge-triggered one but the respective IRR
+	* bit gets set nevertheless.  As a result the I/O unit expects an EOI
+	* message but it will never arrive and further interrupts are blocked
+	* from the source.  The exact reason is so far unknown, but the
+	* phenomenon was observed when two consecutive interrupt requests
+	* from a given source get delivered to the same CPU and the source is
+	* temporarily disabled in between.
+	*
+	* A workaround is to simulate an EOI message manually.  We achieve it
+	* by setting the trigger mode to edge and then to level when the edge
+	* trigger mode gets detected in the TMR of a local APIC for a
+	* level-triggered interrupt.  We mask the source for the time of the
+	* operation to prevent an edge-triggered interrupt escaping meanwhile.
+	* The idea is from Manfred Spraul.  --macro
+	*/
+	cfg = desc->chip_data;
+	i = cfg->vector;
+
+	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
+#endif
+
+	/*
+	 * We must acknowledge the irq before we move it or the acknowledge will
+	 * not propagate properly.
+	 */
+	ack_APIC_irq();
+
+	/* Now we can move and renable the irq */
+	if (unlikely(do_unmask_irq)) {
+		/* Only migrate the irq if the ack has been received.
+		 *
+		 * On rare occasions the broadcast level triggered ack gets
+		 * delayed going to ioapics, and if we reprogram the
+		 * vector while Remote IRR is still set the irq will never
+		 * fire again.
+		 *
+		 * To prevent this scenario we read the Remote IRR bit
+		 * of the ioapic.  This has two effects.
+		 * - On any sane system the read of the ioapic will
+		 *   flush writes (and acks) going to the ioapic from
+		 *   this cpu.
+		 * - We get to see if the ACK has actually been delivered.
+		 *
+		 * Based on failed experiments of reprogramming the
+		 * ioapic entry from outside of irq context starting
+		 * with masking the ioapic entry and then polling until
+		 * Remote IRR was clear before reprogramming the
+		 * ioapic I don't trust the Remote IRR bit to be
+		 * completey accurate.
+		 *
+		 * However there appears to be no other way to plug
+		 * this race, so if the Remote IRR bit is not
+		 * accurate and is causing problems then it is a hardware bug
+		 * and you can go talk to the chipset vendor about it.
+		 */
+		cfg = desc->chip_data;
+		if (!io_apic_level_ack_pending(cfg))
+			move_masked_irq(irq);
+		unmask_IO_APIC_irq_desc(desc);
+	}
+
+#ifdef CONFIG_X86_32
+	if (!(v & (1 << (i & 0x1f)))) {
+		atomic_inc(&irq_mis_count);
+		spin_lock(&ioapic_lock);
+		__mask_and_edge_IO_APIC_irq(cfg);
+		__unmask_and_level_IO_APIC_irq(cfg);
+		spin_unlock(&ioapic_lock);
+	}
+#endif
+}
+
+static struct irq_chip ioapic_chip __read_mostly = {
+	.name		= "IO-APIC",
+	.startup	= startup_ioapic_irq,
+	.mask		= mask_IO_APIC_irq,
+	.unmask		= unmask_IO_APIC_irq,
+	.ack		= ack_apic_edge,
+	.eoi		= ack_apic_level,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_ioapic_affinity_irq,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip __read_mostly = {
+	.name		= "IR-IO-APIC",
+	.startup	= startup_ioapic_irq,
+	.mask		= mask_IO_APIC_irq,
+	.unmask		= unmask_IO_APIC_irq,
+	.ack		= ack_x2apic_edge,
+	.eoi		= ack_x2apic_level,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_ir_ioapic_affinity_irq,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+#endif
+
+static inline void init_IO_APIC_traps(void)
+{
+	int irq;
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+
+	/*
+	 * NOTE! The local APIC isn't very good at handling
+	 * multiple interrupts at the same interrupt level.
+	 * As the interrupt level is determined by taking the
+	 * vector number and shifting that right by 4, we
+	 * want to spread these out a bit so that they don't
+	 * all fall in the same interrupt level.
+	 *
+	 * Also, we've got to be careful not to trash gate
+	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
+	 */
+	for_each_irq_desc(irq, desc) {
+		cfg = desc->chip_data;
+		if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) {
+			/*
+			 * Hmm.. We don't have an entry for this,
+			 * so default to an old-fashioned 8259
+			 * interrupt if we can..
+			 */
+			if (irq < NR_IRQS_LEGACY)
+				make_8259A_irq(irq);
+			else
+				/* Strange. Oh, well.. */
+				desc->chip = &no_irq_chip;
+		}
+	}
+}
+
+/*
+ * The local APIC irq-chip implementation:
+ */
+
+static void mask_lapic_irq(unsigned int irq)
+{
+	unsigned long v;
+
+	v = apic_read(APIC_LVT0);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
+}
+
+static void unmask_lapic_irq(unsigned int irq)
+{
+	unsigned long v;
+
+	v = apic_read(APIC_LVT0);
+	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
+}
+
+static void ack_lapic_irq(unsigned int irq)
+{
+	ack_APIC_irq();
+}
+
+static struct irq_chip lapic_chip __read_mostly = {
+	.name		= "local-APIC",
+	.mask		= mask_lapic_irq,
+	.unmask		= unmask_lapic_irq,
+	.ack		= ack_lapic_irq,
+};
+
+static void lapic_register_intr(int irq, struct irq_desc *desc)
+{
+	desc->status &= ~IRQ_LEVEL;
+	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
+				      "edge");
+}
+
+static void __init setup_nmi(void)
+{
+	/*
+	 * Dirty trick to enable the NMI watchdog ...
+	 * We put the 8259A master into AEOI mode and
+	 * unmask on all local APICs LVT0 as NMI.
+	 *
+	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
+	 * is from Maciej W. Rozycki - so we do not have to EOI from
+	 * the NMI handler or the timer interrupt.
+	 */
+	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
+
+	enable_NMI_through_LVT0();
+
+	apic_printk(APIC_VERBOSE, " done.\n");
+}
+
+/*
+ * This looks a bit hackish but it's about the only one way of sending
+ * a few INTA cycles to 8259As and any associated glue logic.  ICR does
+ * not support the ExtINT mode, unfortunately.  We need to send these
+ * cycles as some i82489DX-based boards have glue logic that keeps the
+ * 8259A interrupt line asserted until INTA.  --macro
+ */
+static inline void __init unlock_ExtINT_logic(void)
+{
+	int apic, pin, i;
+	struct IO_APIC_route_entry entry0, entry1;
+	unsigned char save_control, save_freq_select;
+
+	pin  = find_isa_irq_pin(8, mp_INT);
+	if (pin == -1) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+	apic = find_isa_irq_apic(8, mp_INT);
+	if (apic == -1) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+
+	entry0 = ioapic_read_entry(apic, pin);
+	clear_IO_APIC_pin(apic, pin);
+
+	memset(&entry1, 0, sizeof(entry1));
+
+	entry1.dest_mode = 0;			/* physical delivery */
+	entry1.mask = 0;			/* unmask IRQ now */
+	entry1.dest = hard_smp_processor_id();
+	entry1.delivery_mode = dest_ExtINT;
+	entry1.polarity = entry0.polarity;
+	entry1.trigger = 0;
+	entry1.vector = 0;
+
+	ioapic_write_entry(apic, pin, entry1);
+
+	save_control = CMOS_READ(RTC_CONTROL);
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
+		   RTC_FREQ_SELECT);
+	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
+
+	i = 100;
+	while (i-- > 0) {
+		mdelay(10);
+		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
+			i -= 10;
+	}
+
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	clear_IO_APIC_pin(apic, pin);
+
+	ioapic_write_entry(apic, pin, entry0);
+}
+
+static int disable_timer_pin_1 __initdata;
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
+{
+	disable_timer_pin_1 = 1;
+	return 0;
+}
+early_param("disable_timer_pin_1", disable_timer_pin_setup);
+
+int timer_through_8259 __initdata;
+
+/*
+ * This code may look a bit paranoid, but it's supposed to cooperate with
+ * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
+ * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
+ * fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for all platforms.
+ */
+static inline void __init check_timer(void)
+{
+	struct irq_desc *desc = irq_to_desc(0);
+	struct irq_cfg *cfg = desc->chip_data;
+	int cpu = boot_cpu_id;
+	int apic1, pin1, apic2, pin2;
+	unsigned long flags;
+	int no_pin1 = 0;
+
+	local_irq_save(flags);
+
+	/*
+	 * get/set the timer IRQ vector:
+	 */
+	disable_8259A_irq(0);
+	assign_irq_vector(0, cfg, apic->target_cpus());
+
+	/*
+	 * As IRQ0 is to be enabled in the 8259A, the virtual
+	 * wire has to be disabled in the local APIC.  Also
+	 * timer interrupts need to be acknowledged manually in
+	 * the 8259A for the i82489DX when using the NMI
+	 * watchdog as that APIC treats NMIs as level-triggered.
+	 * The AEOI mode will finish them in the 8259A
+	 * automatically.
+	 */
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	init_8259A(1);
+#ifdef CONFIG_X86_32
+	{
+		unsigned int ver;
+
+		ver = apic_read(APIC_LVR);
+		ver = GET_APIC_VERSION(ver);
+		timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+	}
+#endif
+
+	pin1  = find_isa_irq_pin(0, mp_INT);
+	apic1 = find_isa_irq_apic(0, mp_INT);
+	pin2  = ioapic_i8259.pin;
+	apic2 = ioapic_i8259.apic;
+
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    cfg->vector, apic1, pin1, apic2, pin2);
+
+	/*
+	 * Some BIOS writers are clueless and report the ExtINTA
+	 * I/O APIC input from the cascaded 8259A as the timer
+	 * interrupt input.  So just in case, if only one pin
+	 * was found above, try it both directly and through the
+	 * 8259A.
+	 */
+	if (pin1 == -1) {
+#ifdef CONFIG_INTR_REMAP
+		if (intr_remapping_enabled)
+			panic("BIOS bug: timer not connected to IO-APIC");
+#endif
+		pin1 = pin2;
+		apic1 = apic2;
+		no_pin1 = 1;
+	} else if (pin2 == -1) {
+		pin2 = pin1;
+		apic2 = apic1;
+	}
+
+	if (pin1 != -1) {
+		/*
+		 * Ok, does IRQ0 through the IOAPIC work?
+		 */
+		if (no_pin1) {
+			add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
+			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+		} else {
+			/* for edge trigger, setup_IO_APIC_irq already
+			 * leave it unmasked.
+			 * so only need to unmask if it is level-trigger
+			 * do we really have level trigger timer?
+			 */
+			int idx;
+			idx = find_irq_entry(apic1, pin1, mp_INT);
+			if (idx != -1 && irq_trigger(idx))
+				unmask_IO_APIC_irq_desc(desc);
+		}
+		if (timer_irq_works()) {
+			if (nmi_watchdog == NMI_IO_APIC) {
+				setup_nmi();
+				enable_8259A_irq(0);
+			}
+			if (disable_timer_pin_1 > 0)
+				clear_IO_APIC_pin(0, pin1);
+			goto out;
+		}
+#ifdef CONFIG_INTR_REMAP
+		if (intr_remapping_enabled)
+			panic("timer doesn't work through Interrupt-remapped IO-APIC");
+#endif
+		local_irq_disable();
+		clear_IO_APIC_pin(apic1, pin1);
+		if (!no_pin1)
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
+
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
+		/*
+		 * legacy devices should be connected to IO APIC #0
+		 */
+		replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
+		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+		enable_8259A_irq(0);
+		if (timer_irq_works()) {
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
+			timer_through_8259 = 1;
+			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
+				setup_nmi();
+				enable_8259A_irq(0);
+			}
+			goto out;
+		}
+		/*
+		 * Cleanup, just in case ...
+		 */
+		local_irq_disable();
+		disable_8259A_irq(0);
+		clear_IO_APIC_pin(apic2, pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
+	}
+
+	if (nmi_watchdog == NMI_IO_APIC) {
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
+		nmi_watchdog = NMI_NONE;
+	}
+#ifdef CONFIG_X86_32
+	timer_ack = 0;
+#endif
+
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
+
+	lapic_register_intr(0, desc);
+	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
+	enable_8259A_irq(0);
+
+	if (timer_irq_works()) {
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
+		goto out;
+	}
+	local_irq_disable();
+	disable_8259A_irq(0);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
+
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
+
+	init_8259A(0);
+	make_8259A_irq(0);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
+
+	unlock_ExtINT_logic();
+
+	if (timer_irq_works()) {
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
+		goto out;
+	}
+	local_irq_disable();
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+		"report.  Then try booting with the 'noapic' option.\n");
+out:
+	local_irq_restore(flags);
+}
+
+/*
+ * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
+ * to devices.  However there may be an I/O APIC pin available for
+ * this interrupt regardless.  The pin may be left unconnected, but
+ * typically it will be reused as an ExtINT cascade interrupt for
+ * the master 8259A.  In the MPS case such a pin will normally be
+ * reported as an ExtINT interrupt in the MP table.  With ACPI
+ * there is no provision for ExtINT interrupts, and in the absence
+ * of an override it would be treated as an ordinary ISA I/O APIC
+ * interrupt, that is edge-triggered and unmasked by default.  We
+ * used to do this, but it caused problems on some systems because
+ * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
+ * the same ExtINT cascade interrupt to drive the local APIC of the
+ * bootstrap processor.  Therefore we refrain from routing IRQ2 to
+ * the I/O APIC in all cases now.  No actual device should request
+ * it anyway.  --macro
+ */
+#define PIC_IRQS	(1 << PIC_CASCADE_IR)
+
+void __init setup_IO_APIC(void)
+{
+
+	/*
+	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
+	 */
+
+	io_apic_irqs = ~PIC_IRQS;
+
+	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
+	/*
+         * Set up IO-APIC IRQ routing.
+         */
+#ifdef CONFIG_X86_32
+	if (!acpi_ioapic)
+		setup_ioapic_ids_from_mpc();
+#endif
+	sync_Arb_IDs();
+	setup_IO_APIC_irqs();
+	init_IO_APIC_traps();
+	check_timer();
+}
+
+/*
+ *      Called after all the initialization is done. If we didnt find any
+ *      APIC bugs then we can allow the modify fast path
+ */
+
+static int __init io_apic_bug_finalize(void)
+{
+	if (sis_apic_bug == -1)
+		sis_apic_bug = 0;
+	return 0;
+}
+
+late_initcall(io_apic_bug_finalize);
+
+struct sysfs_ioapic_data {
+	struct sys_device dev;
+	struct IO_APIC_route_entry entry[0];
+};
+static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
+
+static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct IO_APIC_route_entry *entry;
+	struct sysfs_ioapic_data *data;
+	int i;
+
+	data = container_of(dev, struct sysfs_ioapic_data, dev);
+	entry = data->entry;
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
+		*entry = ioapic_read_entry(dev->id, i);
+
+	return 0;
+}
+
+static int ioapic_resume(struct sys_device *dev)
+{
+	struct IO_APIC_route_entry *entry;
+	struct sysfs_ioapic_data *data;
+	unsigned long flags;
+	union IO_APIC_reg_00 reg_00;
+	int i;
+
+	data = container_of(dev, struct sysfs_ioapic_data, dev);
+	entry = data->entry;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(dev->id, 0);
+	if (reg_00.bits.ID != mp_ioapics[dev->id].apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].apicid;
+		io_apic_write(dev->id, 0, reg_00.raw);
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
+		ioapic_write_entry(dev->id, i, entry[i]);
+
+	return 0;
+}
+
+static struct sysdev_class ioapic_sysdev_class = {
+	.name = "ioapic",
+	.suspend = ioapic_suspend,
+	.resume = ioapic_resume,
+};
+
+static int __init ioapic_init_sysfs(void)
+{
+	struct sys_device * dev;
+	int i, size, error;
+
+	error = sysdev_class_register(&ioapic_sysdev_class);
+	if (error)
+		return error;
+
+	for (i = 0; i < nr_ioapics; i++ ) {
+		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
+			* sizeof(struct IO_APIC_route_entry);
+		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
+		if (!mp_ioapic_data[i]) {
+			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+			continue;
+		}
+		dev = &mp_ioapic_data[i]->dev;
+		dev->id = i;
+		dev->cls = &ioapic_sysdev_class;
+		error = sysdev_register(dev);
+		if (error) {
+			kfree(mp_ioapic_data[i]);
+			mp_ioapic_data[i] = NULL;
+			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+device_initcall(ioapic_init_sysfs);
+
+static int nr_irqs_gsi = NR_IRQS_LEGACY;
+/*
+ * Dynamic irq allocate and deallocation
+ */
+unsigned int create_irq_nr(unsigned int irq_want)
+{
+	/* Allocate an unused irq */
+	unsigned int irq;
+	unsigned int new;
+	unsigned long flags;
+	struct irq_cfg *cfg_new = NULL;
+	int cpu = boot_cpu_id;
+	struct irq_desc *desc_new = NULL;
+
+	irq = 0;
+	if (irq_want < nr_irqs_gsi)
+		irq_want = nr_irqs_gsi;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	for (new = irq_want; new < nr_irqs; new++) {
+		desc_new = irq_to_desc_alloc_cpu(new, cpu);
+		if (!desc_new) {
+			printk(KERN_INFO "can not get irq_desc for %d\n", new);
+			continue;
+		}
+		cfg_new = desc_new->chip_data;
+
+		if (cfg_new->vector != 0)
+			continue;
+		if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
+			irq = new;
+		break;
+	}
+	spin_unlock_irqrestore(&vector_lock, flags);
+
+	if (irq > 0) {
+		dynamic_irq_init(irq);
+		/* restore it, in case dynamic_irq_init clear it */
+		if (desc_new)
+			desc_new->chip_data = cfg_new;
+	}
+	return irq;
+}
+
+int create_irq(void)
+{
+	unsigned int irq_want;
+	int irq;
+
+	irq_want = nr_irqs_gsi;
+	irq = create_irq_nr(irq_want);
+
+	if (irq == 0)
+		irq = -1;
+
+	return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+	unsigned long flags;
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+
+	/* store it, in case dynamic_irq_cleanup clear it */
+	desc = irq_to_desc(irq);
+	cfg = desc->chip_data;
+	dynamic_irq_cleanup(irq);
+	/* connect back irq_cfg */
+	if (desc)
+		desc->chip_data = cfg;
+
+#ifdef CONFIG_INTR_REMAP
+	free_irte(irq);
+#endif
+	spin_lock_irqsave(&vector_lock, flags);
+	__clear_irq_vector(irq, cfg);
+	spin_unlock_irqrestore(&vector_lock, flags);
+}
+
+/*
+ * MSI message composition
+ */
+#ifdef CONFIG_PCI_MSI
+static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+{
+	struct irq_cfg *cfg;
+	int err;
+	unsigned dest;
+
+	if (disable_apic)
+		return -ENXIO;
+
+	cfg = irq_cfg(irq);
+	err = assign_irq_vector(irq, cfg, apic->target_cpus());
+	if (err)
+		return err;
+
+	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		struct irte irte;
+		int ir_index;
+		u16 sub_handle;
+
+		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
+		BUG_ON(ir_index == -1);
+
+		memset (&irte, 0, sizeof(irte));
+
+		irte.present = 1;
+		irte.dst_mode = apic->irq_dest_mode;
+		irte.trigger_mode = 0; /* edge */
+		irte.dlvry_mode = apic->irq_delivery_mode;
+		irte.vector = cfg->vector;
+		irte.dest_id = IRTE_DEST(dest);
+
+		modify_irte(irq, &irte);
+
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->data = sub_handle;
+		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+				  MSI_ADDR_IR_SHV |
+				  MSI_ADDR_IR_INDEX1(ir_index) |
+				  MSI_ADDR_IR_INDEX2(ir_index);
+	} else
+#endif
+	{
+		msg->address_hi = MSI_ADDR_BASE_HI;
+		msg->address_lo =
+			MSI_ADDR_BASE_LO |
+			((apic->irq_dest_mode == 0) ?
+				MSI_ADDR_DEST_MODE_PHYSICAL:
+				MSI_ADDR_DEST_MODE_LOGICAL) |
+			((apic->irq_delivery_mode != dest_LowestPrio) ?
+				MSI_ADDR_REDIRECTION_CPU:
+				MSI_ADDR_REDIRECTION_LOWPRI) |
+			MSI_ADDR_DEST_ID(dest);
+
+		msg->data =
+			MSI_DATA_TRIGGER_EDGE |
+			MSI_DATA_LEVEL_ASSERT |
+			((apic->irq_delivery_mode != dest_LowestPrio) ?
+				MSI_DATA_DELIVERY_FIXED:
+				MSI_DATA_DELIVERY_LOWPRI) |
+			MSI_DATA_VECTOR(cfg->vector);
+	}
+	return err;
+}
+
+#ifdef CONFIG_SMP
+static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg;
+	struct msi_msg msg;
+	unsigned int dest;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return;
+
+	cfg = desc->chip_data;
+
+	read_msi_msg_desc(desc, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+	write_msi_msg_desc(desc, &msg);
+}
+#ifdef CONFIG_INTR_REMAP
+/*
+ * Migrate the MSI irq to another cpumask. This migration is
+ * done in the process context using interrupt-remapping hardware.
+ */
+static void
+ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg = desc->chip_data;
+	unsigned int dest;
+	struct irte irte;
+
+	if (get_irte(irq, &irte))
+		return;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return;
+
+	irte.vector = cfg->vector;
+	irte.dest_id = IRTE_DEST(dest);
+
+	/*
+	 * atomically update the IRTE with the new destination and vector.
+	 */
+	modify_irte(irq, &irte);
+
+	/*
+	 * After this point, all the interrupts will start arriving
+	 * at the new destination. So, time to cleanup the previous
+	 * vector allocation.
+	 */
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+}
+
+#endif
+#endif /* CONFIG_SMP */
+
+/*
+ * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
+ * which implement the MSI or MSI-X Capability Structure.
+ */
+static struct irq_chip msi_chip = {
+	.name		= "PCI-MSI",
+	.unmask		= unmask_msi_irq,
+	.mask		= mask_msi_irq,
+	.ack		= ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_msi_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip msi_ir_chip = {
+	.name		= "IR-PCI-MSI",
+	.unmask		= unmask_msi_irq,
+	.mask		= mask_msi_irq,
+	.ack		= ack_x2apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= ir_set_msi_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+/*
+ * Map the PCI dev to the corresponding remapping hardware unit
+ * and allocate 'nvec' consecutive interrupt-remapping table entries
+ * in it.
+ */
+static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
+{
+	struct intel_iommu *iommu;
+	int index;
+
+	iommu = map_dev_to_ir(dev);
+	if (!iommu) {
+		printk(KERN_ERR
+		       "Unable to map PCI %s to iommu\n", pci_name(dev));
+		return -ENOENT;
+	}
+
+	index = alloc_irte(iommu, irq, nvec);
+	if (index < 0) {
+		printk(KERN_ERR
+		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
+		       pci_name(dev));
+		return -ENOSPC;
+	}
+	return index;
+}
+#endif
+
+static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(dev, irq, &msg);
+	if (ret < 0)
+		return ret;
+
+	set_irq_msi(irq, msidesc);
+	write_msi_msg(irq, &msg);
+
+#ifdef CONFIG_INTR_REMAP
+	if (irq_remapped(irq)) {
+		struct irq_desc *desc = irq_to_desc(irq);
+		/*
+		 * irq migration in process context
+		 */
+		desc->status |= IRQ_MOVE_PCNTXT;
+		set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
+	} else
+#endif
+		set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+
+	dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq);
+
+	return 0;
+}
+
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	unsigned int irq;
+	int ret, sub_handle;
+	struct msi_desc *msidesc;
+	unsigned int irq_want;
+
+#ifdef CONFIG_INTR_REMAP
+	struct intel_iommu *iommu = 0;
+	int index = 0;
+#endif
+
+	irq_want = nr_irqs_gsi;
+	sub_handle = 0;
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		irq = create_irq_nr(irq_want);
+		if (irq == 0)
+			return -1;
+		irq_want = irq + 1;
+#ifdef CONFIG_INTR_REMAP
+		if (!intr_remapping_enabled)
+			goto no_ir;
+
+		if (!sub_handle) {
+			/*
+			 * allocate the consecutive block of IRTE's
+			 * for 'nvec'
+			 */
+			index = msi_alloc_irte(dev, irq, nvec);
+			if (index < 0) {
+				ret = index;
+				goto error;
+			}
+		} else {
+			iommu = map_dev_to_ir(dev);
+			if (!iommu) {
+				ret = -ENOENT;
+				goto error;
+			}
+			/*
+			 * setup the mapping between the irq and the IRTE
+			 * base index, the sub_handle pointing to the
+			 * appropriate interrupt remap table entry.
+			 */
+			set_irte_irq(irq, iommu, index, sub_handle);
+		}
+no_ir:
+#endif
+		ret = setup_msi_irq(dev, msidesc, irq);
+		if (ret < 0)
+			goto error;
+		sub_handle++;
+	}
+	return 0;
+
+error:
+	destroy_irq(irq);
+	return ret;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	destroy_irq(irq);
+}
+
+#ifdef CONFIG_DMAR
+#ifdef CONFIG_SMP
+static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg;
+	struct msi_msg msg;
+	unsigned int dest;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return;
+
+	cfg = desc->chip_data;
+
+	dmar_msi_read(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+	dmar_msi_write(irq, &msg);
+}
+
+#endif /* CONFIG_SMP */
+
+struct irq_chip dmar_msi_type = {
+	.name = "DMAR_MSI",
+	.unmask = dmar_msi_unmask,
+	.mask = dmar_msi_mask,
+	.ack = ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity = dmar_msi_set_affinity,
+#endif
+	.retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_dmar_msi(unsigned int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(NULL, irq, &msg);
+	if (ret < 0)
+		return ret;
+	dmar_msi_write(irq, &msg);
+	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
+		"edge");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_HPET_TIMER
+
+#ifdef CONFIG_SMP
+static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg;
+	struct msi_msg msg;
+	unsigned int dest;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return;
+
+	cfg = desc->chip_data;
+
+	hpet_msi_read(irq, &msg);
+
+	msg.data &= ~MSI_DATA_VECTOR_MASK;
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+	hpet_msi_write(irq, &msg);
+}
+
+#endif /* CONFIG_SMP */
+
+struct irq_chip hpet_msi_type = {
+	.name = "HPET_MSI",
+	.unmask = hpet_msi_unmask,
+	.mask = hpet_msi_mask,
+	.ack = ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity = hpet_msi_set_affinity,
+#endif
+	.retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_hpet_msi(unsigned int irq)
+{
+	int ret;
+	struct msi_msg msg;
+
+	ret = msi_compose_msg(NULL, irq, &msg);
+	if (ret < 0)
+		return ret;
+
+	hpet_msi_write(irq, &msg);
+	set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
+		"edge");
+
+	return 0;
+}
+#endif
+
+#endif /* CONFIG_PCI_MSI */
+/*
+ * Hypertransport interrupt support
+ */
+#ifdef CONFIG_HT_IRQ
+
+#ifdef CONFIG_SMP
+
+static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
+{
+	struct ht_irq_msg msg;
+	fetch_ht_irq_msg(irq, &msg);
+
+	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
+	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+
+	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
+	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
+
+	write_ht_irq_msg(irq, &msg);
+}
+
+static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg;
+	unsigned int dest;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return;
+
+	cfg = desc->chip_data;
+
+	target_ht_irq(irq, dest, cfg->vector);
+}
+
+#endif
+
+static struct irq_chip ht_irq_chip = {
+	.name		= "PCI-HT",
+	.mask		= mask_ht_irq,
+	.unmask		= unmask_ht_irq,
+	.ack		= ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity	= set_ht_irq_affinity,
+#endif
+	.retrigger	= ioapic_retrigger_irq,
+};
+
+int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+{
+	struct irq_cfg *cfg;
+	int err;
+
+	if (disable_apic)
+		return -ENXIO;
+
+	cfg = irq_cfg(irq);
+	err = assign_irq_vector(irq, cfg, apic->target_cpus());
+	if (!err) {
+		struct ht_irq_msg msg;
+		unsigned dest;
+
+		dest = apic->cpu_mask_to_apicid_and(cfg->domain,
+						    apic->target_cpus());
+
+		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+
+		msg.address_lo =
+			HT_IRQ_LOW_BASE |
+			HT_IRQ_LOW_DEST_ID(dest) |
+			HT_IRQ_LOW_VECTOR(cfg->vector) |
+			((apic->irq_dest_mode == 0) ?
+				HT_IRQ_LOW_DM_PHYSICAL :
+				HT_IRQ_LOW_DM_LOGICAL) |
+			HT_IRQ_LOW_RQEOI_EDGE |
+			((apic->irq_delivery_mode != dest_LowestPrio) ?
+				HT_IRQ_LOW_MT_FIXED :
+				HT_IRQ_LOW_MT_ARBITRATED) |
+			HT_IRQ_LOW_IRQ_MASKED;
+
+		write_ht_irq_msg(irq, &msg);
+
+		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
+					      handle_edge_irq, "edge");
+
+		dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
+	}
+	return err;
+}
+#endif /* CONFIG_HT_IRQ */
+
+#ifdef CONFIG_X86_UV
+/*
+ * Re-target the irq to the specified CPU and enable the specified MMR located
+ * on the specified blade to allow the sending of MSIs to the specified CPU.
+ */
+int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
+		       unsigned long mmr_offset)
+{
+	const struct cpumask *eligible_cpu = cpumask_of(cpu);
+	struct irq_cfg *cfg;
+	int mmr_pnode;
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	unsigned long flags;
+	int err;
+
+	cfg = irq_cfg(irq);
+
+	err = assign_irq_vector(irq, cfg, eligible_cpu);
+	if (err != 0)
+		return err;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
+				      irq_name);
+	spin_unlock_irqrestore(&vector_lock, flags);
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
+	entry->vector = cfg->vector;
+	entry->delivery_mode = apic->irq_delivery_mode;
+	entry->dest_mode = apic->irq_dest_mode;
+	entry->polarity = 0;
+	entry->trigger = 0;
+	entry->mask = 0;
+	entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
+
+	mmr_pnode = uv_blade_to_pnode(mmr_blade);
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+
+	return irq;
+}
+
+/*
+ * Disable the specified MMR located on the specified blade so that MSIs are
+ * longer allowed to be sent.
+ */
+void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
+{
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	int mmr_pnode;
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
+	entry->mask = 1;
+
+	mmr_pnode = uv_blade_to_pnode(mmr_blade);
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+}
+#endif /* CONFIG_X86_64 */
+
+int __init io_apic_get_redir_entries (int ioapic)
+{
+	union IO_APIC_reg_01	reg_01;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_01.raw = io_apic_read(ioapic, 1);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return reg_01.bits.entries;
+}
+
+void __init probe_nr_irqs_gsi(void)
+{
+	int nr = 0;
+
+	nr = acpi_probe_gsi();
+	if (nr > nr_irqs_gsi) {
+		nr_irqs_gsi = nr;
+	} else {
+		/* for acpi=off or acpi is not compiled in */
+		int idx;
+
+		nr = 0;
+		for (idx = 0; idx < nr_ioapics; idx++)
+			nr += io_apic_get_redir_entries(idx) + 1;
+
+		if (nr > nr_irqs_gsi)
+			nr_irqs_gsi = nr;
+	}
+
+	printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
+}
+
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	int nr;
+
+	if (nr_irqs > (NR_VECTORS * nr_cpu_ids))
+		nr_irqs = NR_VECTORS * nr_cpu_ids;
+
+	nr = nr_irqs_gsi + 8 * nr_cpu_ids;
+#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
+	/*
+	 * for MSI and HT dyn irq
+	 */
+	nr += nr_irqs_gsi * 16;
+#endif
+	if (nr < nr_irqs)
+		nr_irqs = nr;
+
+	return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------------
+                          ACPI-based IOAPIC Configuration
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI
+
+#ifdef CONFIG_X86_32
+int __init io_apic_get_unique_id(int ioapic, int apic_id)
+{
+	union IO_APIC_reg_00 reg_00;
+	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+	physid_mask_t tmp;
+	unsigned long flags;
+	int i = 0;
+
+	/*
+	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
+	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
+	 * supports up to 16 on one shared APIC bus.
+	 *
+	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
+	 *      advantage of new APIC bus architecture.
+	 */
+
+	if (physids_empty(apic_id_map))
+		apic_id_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(ioapic, 0);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	if (apic_id >= get_physical_broadcast()) {
+		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
+			"%d\n", ioapic, apic_id, reg_00.bits.ID);
+		apic_id = reg_00.bits.ID;
+	}
+
+	/*
+	 * Every APIC in a system must have a unique ID or we get lots of nice
+	 * 'stuck on smp_invalidate_needed IPI wait' messages.
+	 */
+	if (apic->check_apicid_used(apic_id_map, apic_id)) {
+
+		for (i = 0; i < get_physical_broadcast(); i++) {
+			if (!apic->check_apicid_used(apic_id_map, i))
+				break;
+		}
+
+		if (i == get_physical_broadcast())
+			panic("Max apic_id exceeded!\n");
+
+		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
+			"trying %d\n", ioapic, apic_id, i);
+
+		apic_id = i;
+	}
+
+	tmp = apic->apicid_to_cpu_present(apic_id);
+	physids_or(apic_id_map, apic_id_map, tmp);
+
+	if (reg_00.bits.ID != apic_id) {
+		reg_00.bits.ID = apic_id;
+
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(ioapic, 0, reg_00.raw);
+		reg_00.raw = io_apic_read(ioapic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		/* Sanity check */
+		if (reg_00.bits.ID != apic_id) {
+			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			return -1;
+		}
+	}
+
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
+
+	return apic_id;
+}
+
+int __init io_apic_get_version(int ioapic)
+{
+	union IO_APIC_reg_01	reg_01;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_01.raw = io_apic_read(ioapic, 1);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return reg_01.bits.version;
+}
+#endif
+
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
+{
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+	int cpu = boot_cpu_id;
+
+	if (!IO_APIC_IRQ(irq)) {
+		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+			ioapic);
+		return -EINVAL;
+	}
+
+	desc = irq_to_desc_alloc_cpu(irq, cpu);
+	if (!desc) {
+		printk(KERN_INFO "can not get irq_desc %d\n", irq);
+		return 0;
+	}
+
+	/*
+	 * IRQs < 16 are already in the irq_2_pin[] map
+	 */
+	if (irq >= NR_IRQS_LEGACY) {
+		cfg = desc->chip_data;
+		add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
+	}
+
+	setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
+
+	return 0;
+}
+
+
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+	int i;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].irqtype == mp_INT &&
+		    mp_irqs[i].srcbusirq == bus_irq)
+			break;
+	if (i >= mp_irq_entries)
+		return -1;
+
+	*trigger = irq_trigger(i);
+	*polarity = irq_polarity(i);
+	return 0;
+}
+
+#endif /* CONFIG_ACPI */
+
+/*
+ * This function currently is only a helper for the i386 smp boot process where
+ * we need to reprogram the ioredtbls to cater for the cpus which have come online
+ * so mask in all cases should simply be apic->target_cpus()
+ */
+#ifdef CONFIG_SMP
+void __init setup_ioapic_dest(void)
+{
+	int pin, ioapic, irq, irq_entry;
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+	const struct cpumask *mask;
+
+	if (skip_ioapic_setup == 1)
+		return;
+
+	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
+		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+			if (irq_entry == -1)
+				continue;
+			irq = pin_2_irq(irq_entry, ioapic, pin);
+
+			/* setup_IO_APIC_irqs could fail to get vector for some device
+			 * when you have too many devices, because at that time only boot
+			 * cpu is online.
+			 */
+			desc = irq_to_desc(irq);
+			cfg = desc->chip_data;
+			if (!cfg->vector) {
+				setup_IO_APIC_irq(ioapic, pin, irq, desc,
+						  irq_trigger(irq_entry),
+						  irq_polarity(irq_entry));
+				continue;
+
+			}
+
+			/*
+			 * Honour affinities which have been set in early boot
+			 */
+			if (desc->status &
+			    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+				mask = desc->affinity;
+			else
+				mask = apic->target_cpus();
+
+#ifdef CONFIG_INTR_REMAP
+			if (intr_remapping_enabled)
+				set_ir_ioapic_affinity_irq_desc(desc, mask);
+			else
+#endif
+				set_ioapic_affinity_irq_desc(desc, mask);
+		}
+
+	}
+}
+#endif
+
+#define IOAPIC_RESOURCE_NAME_SIZE 11
+
+static struct resource *ioapic_resources;
+
+static struct resource * __init ioapic_setup_resources(void)
+{
+	unsigned long n;
+	struct resource *res;
+	char *mem;
+	int i;
+
+	if (nr_ioapics <= 0)
+		return NULL;
+
+	n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
+	n *= nr_ioapics;
+
+	mem = alloc_bootmem(n);
+	res = (void *)mem;
+
+	if (mem != NULL) {
+		mem += sizeof(struct resource) * nr_ioapics;
+
+		for (i = 0; i < nr_ioapics; i++) {
+			res[i].name = mem;
+			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+			sprintf(mem,  "IOAPIC %u", i);
+			mem += IOAPIC_RESOURCE_NAME_SIZE;
+		}
+	}
+
+	ioapic_resources = res;
+
+	return res;
+}
+
+void __init ioapic_init_mappings(void)
+{
+	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
+	struct resource *ioapic_res;
+	int i;
+
+	ioapic_res = ioapic_setup_resources();
+	for (i = 0; i < nr_ioapics; i++) {
+		if (smp_found_config) {
+			ioapic_phys = mp_ioapics[i].apicaddr;
+#ifdef CONFIG_X86_32
+			if (!ioapic_phys) {
+				printk(KERN_ERR
+				       "WARNING: bogus zero IO-APIC "
+				       "address found in MPTABLE, "
+				       "disabling IO/APIC support!\n");
+				smp_found_config = 0;
+				skip_ioapic_setup = 1;
+				goto fake_ioapic_page;
+			}
+#endif
+		} else {
+#ifdef CONFIG_X86_32
+fake_ioapic_page:
+#endif
+			ioapic_phys = (unsigned long)
+				alloc_bootmem_pages(PAGE_SIZE);
+			ioapic_phys = __pa(ioapic_phys);
+		}
+		set_fixmap_nocache(idx, ioapic_phys);
+		apic_printk(APIC_VERBOSE,
+			    "mapped IOAPIC to %08lx (%08lx)\n",
+			    __fix_to_virt(idx), ioapic_phys);
+		idx++;
+
+		if (ioapic_res != NULL) {
+			ioapic_res->start = ioapic_phys;
+			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+			ioapic_res++;
+		}
+	}
+}
+
+static int __init ioapic_insert_resources(void)
+{
+	int i;
+	struct resource *r = ioapic_resources;
+
+	if (!r) {
+		printk(KERN_ERR
+		       "IO APIC resources could be not be allocated.\n");
+		return -1;
+	}
+
+	for (i = 0; i < nr_ioapics; i++) {
+		insert_resource(&iomem_resource, r);
+		r++;
+	}
+
+	return 0;
+}
+
+/* Insert the IO APIC resources after PCI initialization has occured to handle
+ * IO APICS that are mapped in on a BAR in PCI space. */
+late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
new file mode 100644
index 00000000000..dbf5445727a
--- /dev/null
+++ b/arch/x86/kernel/apic/ipi.c
@@ -0,0 +1,164 @@
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/apic.h>
+#include <asm/proto.h>
+#include <asm/ipi.h>
+
+void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
+{
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicast to each CPU instead.
+	 * - mbligh
+	 */
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
+				query_cpu), vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
+						 int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int query_cpu;
+	unsigned long flags;
+
+	/* See Hack comment above */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
+				 query_cpu), vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
+						 int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
+	 * should be modified to do 1 message per cluster ID - mbligh
+	 */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask)
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector,
+			apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
+						 int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+	unsigned int this_cpu = smp_processor_id();
+
+	/* See Hack comment above */
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__default_send_IPI_dest_field(
+			apic->cpu_to_logical_apicid(query_cpu), vector,
+			apic->dest_logical);
+		}
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_X86_32
+
+/*
+ * This is only used on smaller machines.
+ */
+void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector)
+{
+	unsigned long mask = cpumask_bits(cpumask)[0];
+	unsigned long flags;
+
+	local_irq_save(flags);
+	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
+	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
+	local_irq_restore(flags);
+}
+
+void default_send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__default_local_send_IPI_allbutself(vector);
+}
+
+void default_send_IPI_all(int vector)
+{
+	__default_local_send_IPI_all(vector);
+}
+
+void default_send_IPI_self(int vector)
+{
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, apic->dest_logical);
+}
+
+/* must come after the send_IPI functions above for inlining */
+static int convert_apicid_to_cpu(int apic_id)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
+			return i;
+	}
+	return -1;
+}
+
+int safe_smp_processor_id(void)
+{
+	int apicid, cpuid;
+
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return 0;
+
+	apicid = hard_smp_processor_id();
+	if (apicid == BAD_APICID)
+		return 0;
+
+	cpuid = convert_apicid_to_cpu(apicid);
+
+	return cpuid >= 0 ? cpuid : 0;
+}
+#endif
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
new file mode 100644
index 00000000000..bdfad80c3cf
--- /dev/null
+++ b/arch/x86/kernel/apic/nmi.c
@@ -0,0 +1,564 @@
+/*
+ *  NMI watchdog support on APIC systems
+ *
+ *  Started by Ingo Molnar <mingo@redhat.com>
+ *
+ *  Fixes:
+ *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
+ *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
+ *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
+ *  Pavel Machek and
+ *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
+ */
+
+#include <asm/apic.h>
+
+#include <linux/nmi.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/sysctl.h>
+#include <linux/percpu.h>
+#include <linux/kprobes.h>
+#include <linux/cpumask.h>
+#include <linux/kernel_stat.h>
+#include <linux/kdebug.h>
+#include <linux/smp.h>
+
+#include <asm/i8259.h>
+#include <asm/io_apic.h>
+#include <asm/proto.h>
+#include <asm/timer.h>
+
+#include <asm/mce.h>
+
+#include <asm/mach_traps.h>
+
+int unknown_nmi_panic;
+int nmi_watchdog_enabled;
+
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
+
+/* nmi_active:
+ * >0: the lapic NMI watchdog is active, but can be disabled
+ * <0: the lapic NMI watchdog has not been set up, and cannot
+ *     be enabled
+ *  0: the lapic NMI watchdog is disabled, but can be enabled
+ */
+atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
+
+unsigned int nmi_watchdog = NMI_NONE;
+EXPORT_SYMBOL(nmi_watchdog);
+
+static int panic_on_timeout;
+
+static unsigned int nmi_hz = HZ;
+static DEFINE_PER_CPU(short, wd_enabled);
+static int endflag __initdata;
+
+static inline unsigned int get_nmi_count(int cpu)
+{
+	return per_cpu(irq_stat, cpu).__nmi_count;
+}
+
+static inline int mce_in_progress(void)
+{
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+	return atomic_read(&mce_entry) > 0;
+#endif
+	return 0;
+}
+
+/*
+ * Take the local apic timer and PIT/HPET into account. We don't
+ * know which one is active, when we have highres/dyntick on
+ */
+static inline unsigned int get_timer_irqs(int cpu)
+{
+	return per_cpu(irq_stat, cpu).apic_timer_irqs +
+		per_cpu(irq_stat, cpu).irq0_irqs;
+}
+
+#ifdef CONFIG_SMP
+/*
+ * The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+	local_irq_enable_in_hardirq();
+	/*
+	 * Intentionally don't use cpu_relax here. This is
+	 * to make sure that the performance counter really ticks,
+	 * even if there is a simulator or similar that catches the
+	 * pause instruction. On a real HT machine this is fine because
+	 * all other CPUs are busy with "useless" delay loops and don't
+	 * care if they get somewhat less cycles.
+	 */
+	while (endflag == 0)
+		mb();
+}
+#endif
+
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+	printk(KERN_CONT "\n");
+
+	printk(KERN_WARNING
+		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+	printk(KERN_WARNING
+		"Please report this to bugzilla.kernel.org,\n");
+	printk(KERN_WARNING
+		"and attach the output of the 'dmesg' command.\n");
+
+	per_cpu(wd_enabled, cpu) = 0;
+	atomic_dec(&nmi_active);
+}
+
+static void __acpi_nmi_disable(void *__unused)
+{
+	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+}
+
+int __init check_nmi_watchdog(void)
+{
+	unsigned int *prev_nmi_count;
+	int cpu;
+
+	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
+		return 0;
+
+	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
+	if (!prev_nmi_count)
+		goto error;
+
+	printk(KERN_INFO "Testing NMI watchdog ... ");
+
+#ifdef CONFIG_SMP
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
+#endif
+
+	for_each_possible_cpu(cpu)
+		prev_nmi_count[cpu] = get_nmi_count(cpu);
+	local_irq_enable();
+	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
+
+	for_each_online_cpu(cpu) {
+		if (!per_cpu(wd_enabled, cpu))
+			continue;
+		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+			report_broken_nmi(cpu, prev_nmi_count);
+	}
+	endflag = 1;
+	if (!atomic_read(&nmi_active)) {
+		kfree(prev_nmi_count);
+		atomic_set(&nmi_active, -1);
+		goto error;
+	}
+	printk("OK.\n");
+
+	/*
+	 * now that we know it works we can reduce NMI frequency to
+	 * something more reasonable; makes a difference in some configs
+	 */
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		nmi_hz = lapic_adjust_nmi_hz(1);
+
+	kfree(prev_nmi_count);
+	return 0;
+error:
+	if (nmi_watchdog == NMI_IO_APIC) {
+		if (!timer_through_8259)
+			disable_8259A_irq(0);
+		on_each_cpu(__acpi_nmi_disable, NULL, 1);
+	}
+
+#ifdef CONFIG_X86_32
+	timer_ack = 0;
+#endif
+	return -1;
+}
+
+static int __init setup_nmi_watchdog(char *str)
+{
+	unsigned int nmi;
+
+	if (!strncmp(str, "panic", 5)) {
+		panic_on_timeout = 1;
+		str = strchr(str, ',');
+		if (!str)
+			return 1;
+		++str;
+	}
+
+	if (!strncmp(str, "lapic", 5))
+		nmi_watchdog = NMI_LOCAL_APIC;
+	else if (!strncmp(str, "ioapic", 6))
+		nmi_watchdog = NMI_IO_APIC;
+	else {
+		get_option(&str, &nmi);
+		if (nmi >= NMI_INVALID)
+			return 0;
+		nmi_watchdog = nmi;
+	}
+
+	return 1;
+}
+__setup("nmi_watchdog=", setup_nmi_watchdog);
+
+/*
+ * Suspend/resume support
+ */
+#ifdef CONFIG_PM
+
+static int nmi_pm_active; /* nmi_active before suspend */
+
+static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
+{
+	/* only CPU0 goes here, other CPUs should be offline */
+	nmi_pm_active = atomic_read(&nmi_active);
+	stop_apic_nmi_watchdog(NULL);
+	BUG_ON(atomic_read(&nmi_active) != 0);
+	return 0;
+}
+
+static int lapic_nmi_resume(struct sys_device *dev)
+{
+	/* only CPU0 goes here, other CPUs should be offline */
+	if (nmi_pm_active > 0) {
+		setup_apic_nmi_watchdog(NULL);
+		touch_nmi_watchdog();
+	}
+	return 0;
+}
+
+static struct sysdev_class nmi_sysclass = {
+	.name		= "lapic_nmi",
+	.resume		= lapic_nmi_resume,
+	.suspend	= lapic_nmi_suspend,
+};
+
+static struct sys_device device_lapic_nmi = {
+	.id	= 0,
+	.cls	= &nmi_sysclass,
+};
+
+static int __init init_lapic_nmi_sysfs(void)
+{
+	int error;
+
+	/*
+	 * should really be a BUG_ON but b/c this is an
+	 * init call, it just doesn't work.  -dcz
+	 */
+	if (nmi_watchdog != NMI_LOCAL_APIC)
+		return 0;
+
+	if (atomic_read(&nmi_active) < 0)
+		return 0;
+
+	error = sysdev_class_register(&nmi_sysclass);
+	if (!error)
+		error = sysdev_register(&device_lapic_nmi);
+	return error;
+}
+
+/* must come after the local APIC's device_initcall() */
+late_initcall(init_lapic_nmi_sysfs);
+
+#endif	/* CONFIG_PM */
+
+static void __acpi_nmi_enable(void *__unused)
+{
+	apic_write(APIC_LVT0, APIC_DM_NMI);
+}
+
+/*
+ * Enable timer based NMIs on all CPUs:
+ */
+void acpi_nmi_enable(void)
+{
+	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
+		on_each_cpu(__acpi_nmi_enable, NULL, 1);
+}
+
+/*
+ * Disable timer based NMIs on all CPUs:
+ */
+void acpi_nmi_disable(void)
+{
+	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
+		on_each_cpu(__acpi_nmi_disable, NULL, 1);
+}
+
+/*
+ * This function is called as soon the LAPIC NMI watchdog driver has everything
+ * in place and it's ready to check if the NMIs belong to the NMI watchdog
+ */
+void cpu_nmi_set_wd_enabled(void)
+{
+	__get_cpu_var(wd_enabled) = 1;
+}
+
+void setup_apic_nmi_watchdog(void *unused)
+{
+	if (__get_cpu_var(wd_enabled))
+		return;
+
+	/* cheap hack to support suspend/resume */
+	/* if cpu0 is not active neither should the other cpus */
+	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
+		return;
+
+	switch (nmi_watchdog) {
+	case NMI_LOCAL_APIC:
+		if (lapic_watchdog_init(nmi_hz) < 0) {
+			__get_cpu_var(wd_enabled) = 0;
+			return;
+		}
+		/* FALL THROUGH */
+	case NMI_IO_APIC:
+		__get_cpu_var(wd_enabled) = 1;
+		atomic_inc(&nmi_active);
+	}
+}
+
+void stop_apic_nmi_watchdog(void *unused)
+{
+	/* only support LOCAL and IO APICs for now */
+	if (!nmi_watchdog_active())
+		return;
+	if (__get_cpu_var(wd_enabled) == 0)
+		return;
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		lapic_watchdog_stop();
+	else
+		__acpi_nmi_disable(NULL);
+	__get_cpu_var(wd_enabled) = 0;
+	atomic_dec(&nmi_active);
+}
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check it's local APIC timer IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs don't listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up here too!]
+ */
+
+static DEFINE_PER_CPU(unsigned, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
+
+void touch_nmi_watchdog(void)
+{
+	if (nmi_watchdog_active()) {
+		unsigned cpu;
+
+		/*
+		 * Tell other CPUs to reset their alert counters. We cannot
+		 * do it ourselves because the alert count increase is not
+		 * atomic.
+		 */
+		for_each_present_cpu(cpu) {
+			if (per_cpu(nmi_touch, cpu) != 1)
+				per_cpu(nmi_touch, cpu) = 1;
+		}
+	}
+
+	/*
+	 * Tickle the softlockup detector too:
+	 */
+	touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+notrace __kprobes int
+nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
+{
+	/*
+	 * Since current_thread_info()-> is always on the stack, and we
+	 * always switch the stack NMI-atomically, it's safe to use
+	 * smp_processor_id().
+	 */
+	unsigned int sum;
+	int touched = 0;
+	int cpu = smp_processor_id();
+	int rc = 0;
+
+	/* check for other users first */
+	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+			== NOTIFY_STOP) {
+		rc = 1;
+		touched = 1;
+	}
+
+	sum = get_timer_irqs(cpu);
+
+	if (__get_cpu_var(nmi_touch)) {
+		__get_cpu_var(nmi_touch) = 0;
+		touched = 1;
+	}
+
+	if (cpu_isset(cpu, backtrace_mask)) {
+		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
+
+		spin_lock(&lock);
+		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
+		dump_stack();
+		spin_unlock(&lock);
+		cpu_clear(cpu, backtrace_mask);
+	}
+
+	/* Could check oops_in_progress here too, but it's safer not to */
+	if (mce_in_progress())
+		touched = 1;
+
+	/* if the none of the timers isn't firing, this cpu isn't doing much */
+	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
+		/*
+		 * Ayiee, looks like this CPU is stuck ...
+		 * wait a few IRQs (5 seconds) before doing the oops ...
+		 */
+		local_inc(&__get_cpu_var(alert_counter));
+		if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+			/*
+			 * die_nmi will return ONLY if NOTIFY_STOP happens..
+			 */
+			die_nmi("BUG: NMI Watchdog detected LOCKUP",
+				regs, panic_on_timeout);
+	} else {
+		__get_cpu_var(last_irq_sum) = sum;
+		local_set(&__get_cpu_var(alert_counter), 0);
+	}
+
+	/* see if the nmi watchdog went off */
+	if (!__get_cpu_var(wd_enabled))
+		return rc;
+	switch (nmi_watchdog) {
+	case NMI_LOCAL_APIC:
+		rc |= lapic_wd_event(nmi_hz);
+		break;
+	case NMI_IO_APIC:
+		/*
+		 * don't know how to accurately check for this.
+		 * just assume it was a watchdog timer interrupt
+		 * This matches the old behaviour.
+		 */
+		rc = 1;
+		break;
+	}
+	return rc;
+}
+
+#ifdef CONFIG_SYSCTL
+
+static void enable_ioapic_nmi_watchdog_single(void *unused)
+{
+	__get_cpu_var(wd_enabled) = 1;
+	atomic_inc(&nmi_active);
+	__acpi_nmi_enable(NULL);
+}
+
+static void enable_ioapic_nmi_watchdog(void)
+{
+	on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1);
+	touch_nmi_watchdog();
+}
+
+static void disable_ioapic_nmi_watchdog(void)
+{
+	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
+}
+
+static int __init setup_unknown_nmi_panic(char *str)
+{
+	unknown_nmi_panic = 1;
+	return 1;
+}
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
+
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+	unsigned char reason = get_nmi_reason();
+	char buf[64];
+
+	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+	die_nmi(buf, regs, 1); /* Always panic here */
+	return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/nmi
+ */
+int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
+			void __user *buffer, size_t *length, loff_t *ppos)
+{
+	int old_state;
+
+	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
+	old_state = nmi_watchdog_enabled;
+	proc_dointvec(table, write, file, buffer, length, ppos);
+	if (!!old_state == !!nmi_watchdog_enabled)
+		return 0;
+
+	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
+		printk(KERN_WARNING
+			"NMI watchdog is permanently disabled\n");
+		return -EIO;
+	}
+
+	if (nmi_watchdog == NMI_LOCAL_APIC) {
+		if (nmi_watchdog_enabled)
+			enable_lapic_nmi_watchdog();
+		else
+			disable_lapic_nmi_watchdog();
+	} else if (nmi_watchdog == NMI_IO_APIC) {
+		if (nmi_watchdog_enabled)
+			enable_ioapic_nmi_watchdog();
+		else
+			disable_ioapic_nmi_watchdog();
+	} else {
+		printk(KERN_WARNING
+			"NMI watchdog doesn't know what hardware to touch\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_SYSCTL */
+
+int do_nmi_callback(struct pt_regs *regs, int cpu)
+{
+#ifdef CONFIG_SYSCTL
+	if (unknown_nmi_panic)
+		return unknown_nmi_panic_callback(regs, cpu);
+#endif
+	return 0;
+}
+
+void __trigger_all_cpu_backtrace(void)
+{
+	int i;
+
+	backtrace_mask = cpu_online_map;
+	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
+	for (i = 0; i < 10 * 1000; i++) {
+		if (cpus_empty(backtrace_mask))
+			break;
+		mdelay(1);
+	}
+}
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
new file mode 100644
index 00000000000..4e39d9ad4d5
--- /dev/null
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -0,0 +1,243 @@
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+
+DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (cpu_has_x2apic)
+		return 1;
+
+	return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static const struct cpumask *x2apic_target_cpus(void)
+{
+	return cpumask_of(0);
+}
+
+/*
+ * for now each logical cpu is in its own vector allocation domain.
+ */
+static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+static void
+ __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
+{
+	unsigned long cfg;
+
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * send the IPI.
+	 */
+	native_x2apic_icr_write(cfg, apicid);
+}
+
+/*
+ * for now, we send the IPI's one by one in the cpumask.
+ * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
+ * at once. We have 16 cpu's in a cluster. This will minimize IPI register
+ * writes.
+ */
+static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		__x2apic_send_IPI_dest(
+			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
+			vector, apic->dest_logical);
+	}
+	local_irq_restore(flags);
+}
+
+static void
+ x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
+{
+	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu == this_cpu)
+			continue;
+		__x2apic_send_IPI_dest(
+				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
+				vector, apic->dest_logical);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_online_cpu(query_cpu) {
+		if (query_cpu == this_cpu)
+			continue;
+		__x2apic_send_IPI_dest(
+				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
+				vector, apic->dest_logical);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+	x2apic_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	/*
+	 * We're using fixed IRQ delivery, can only return one logical APIC ID.
+	 * May as well be the first.
+	 */
+	int cpu = cpumask_first(cpumask);
+
+	if ((unsigned)cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_logical_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int
+x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one logical APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+
+	if (cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_logical_apicid, cpu);
+
+	return BAD_APICID;
+}
+
+static unsigned int x2apic_cluster_phys_get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	id = x;
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	x = id;
+	return x;
+}
+
+static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
+{
+	return current_cpu_data.initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+static void init_x2apic_ldr(void)
+{
+	int cpu = smp_processor_id();
+
+	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
+}
+
+struct apic apic_x2apic_cluster = {
+
+	.name				= "cluster x2apic",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
+	.apic_id_registered		= x2apic_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	.irq_dest_mode			= 1, /* logical */
+
+	.target_cpus			= x2apic_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.vector_allocation_domain	= x2apic_vector_allocation_domain,
+	.init_apic_ldr			= init_x2apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= x2apic_cluster_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= x2apic_cluster_phys_get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFFFFFFFu,
+
+	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= x2apic_send_IPI_mask,
+	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
+	.send_IPI_all			= x2apic_send_IPI_all,
+	.send_IPI_self			= x2apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_msr_read,
+	.write				= native_apic_msr_write,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= native_x2apic_icr_write,
+	.wait_icr_idle			= native_x2apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
new file mode 100644
index 00000000000..d2d52eb9f7e
--- /dev/null
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -0,0 +1,229 @@
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+
+static int x2apic_phys;
+
+static int set_x2apic_phys_mode(char *arg)
+{
+	x2apic_phys = 1;
+	return 0;
+}
+early_param("x2apic_phys", set_x2apic_phys_mode);
+
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (cpu_has_x2apic && x2apic_phys)
+		return 1;
+
+	return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static const struct cpumask *x2apic_target_cpus(void)
+{
+	return cpumask_of(0);
+}
+
+static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+				   unsigned int dest)
+{
+	unsigned long cfg;
+
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * send the IPI.
+	 */
+	native_x2apic_icr_write(cfg, apicid);
+}
+
+static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
+				       vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void
+ x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
+{
+	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_cpu(query_cpu, mask) {
+		if (query_cpu != this_cpu)
+			__x2apic_send_IPI_dest(
+				per_cpu(x86_cpu_to_apicid, query_cpu),
+				vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+	unsigned long this_cpu = smp_processor_id();
+	unsigned long query_cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for_each_online_cpu(query_cpu) {
+		if (query_cpu == this_cpu)
+			continue;
+		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
+				       vector, APIC_DEST_PHYSICAL);
+	}
+	local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+	x2apic_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	int cpu = cpumask_first(cpumask);
+
+	if ((unsigned)cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int
+x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+
+	if (cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+
+	return BAD_APICID;
+}
+
+static unsigned int x2apic_phys_get_apic_id(unsigned long x)
+{
+	return x;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	return id;
+}
+
+static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
+{
+	return current_cpu_data.initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+static void init_x2apic_ldr(void)
+{
+}
+
+struct apic apic_x2apic_phys = {
+
+	.name				= "physical x2apic",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
+	.apic_id_registered		= x2apic_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= 0, /* physical */
+
+	.target_cpus			= x2apic_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= 0,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.vector_allocation_domain	= x2apic_vector_allocation_domain,
+	.init_apic_ldr			= init_x2apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= x2apic_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= x2apic_phys_get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFFFFFFFu,
+
+	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= x2apic_send_IPI_mask,
+	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
+	.send_IPI_all			= x2apic_send_IPI_all,
+	.send_IPI_self			= x2apic_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_msr_read,
+	.write				= native_apic_msr_write,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= native_x2apic_icr_write,
+	.wait_icr_idle			= native_x2apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
new file mode 100644
index 00000000000..20b4ad07c3a
--- /dev/null
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -0,0 +1,643 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV APIC functions (note: not an Intel compatible APIC)
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/hardirq.h>
+#include <linux/timer.h>
+#include <linux/proc_fs.h>
+#include <asm/current.h>
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/pgtable.h>
+#include <asm/uv/uv.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
+
+DEFINE_PER_CPU(int, x2apic_extra_bits);
+
+static enum uv_system_type uv_system_type;
+
+static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strcmp(oem_id, "SGI")) {
+		if (!strcmp(oem_table_id, "UVL"))
+			uv_system_type = UV_LEGACY_APIC;
+		else if (!strcmp(oem_table_id, "UVX"))
+			uv_system_type = UV_X2APIC;
+		else if (!strcmp(oem_table_id, "UVH")) {
+			uv_system_type = UV_NON_UNIQUE_APIC;
+			return 1;
+		}
+	}
+	return 0;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+	return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+	return uv_system_type != UV_NONE;
+}
+EXPORT_SYMBOL_GPL(is_uv_system);
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+struct uv_blade_info *uv_blade_info;
+EXPORT_SYMBOL_GPL(uv_blade_info);
+
+short *uv_node_to_blade;
+EXPORT_SYMBOL_GPL(uv_node_to_blade);
+
+short *uv_cpu_to_blade;
+EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
+
+short uv_possible_blades;
+EXPORT_SYMBOL_GPL(uv_possible_blades);
+
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static const struct cpumask *uv_target_cpus(void)
+{
+	return cpumask_of(0);
+}
+
+static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
+{
+	unsigned long val;
+	int pnode;
+
+	pnode = uv_apicid_to_pnode(phys_apicid);
+	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+	    APIC_DM_INIT;
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
+	mdelay(10);
+
+	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+	    APIC_DM_STARTUP;
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
+	return 0;
+}
+
+static void uv_send_IPI_one(int cpu, int vector)
+{
+	unsigned long val, apicid;
+	int pnode;
+
+	apicid = per_cpu(x86_cpu_to_apicid, cpu);
+	pnode = uv_apicid_to_pnode(apicid);
+
+	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+	      (vector << UVH_IPI_INT_VECTOR_SHFT);
+
+	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
+}
+
+static void uv_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, mask)
+		uv_send_IPI_one(cpu, vector);
+}
+
+static void uv_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	for_each_cpu(cpu, mask) {
+		if (cpu != this_cpu)
+			uv_send_IPI_one(cpu, vector);
+	}
+}
+
+static void uv_send_IPI_allbutself(int vector)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	for_each_online_cpu(cpu) {
+		if (cpu != this_cpu)
+			uv_send_IPI_one(cpu, vector);
+	}
+}
+
+static void uv_send_IPI_all(int vector)
+{
+	uv_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int uv_apic_id_registered(void)
+{
+	return 1;
+}
+
+static void uv_init_apic_ldr(void)
+{
+}
+
+static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
+{
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	int cpu = cpumask_first(cpumask);
+
+	if ((unsigned)cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int
+uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			  const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+	if (cpu < nr_cpu_ids)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+
+	return BAD_APICID;
+}
+
+static unsigned int x2apic_get_apic_id(unsigned long x)
+{
+	unsigned int id;
+
+	WARN_ON(preemptible() && num_online_cpus() > 1);
+	id = x | __get_cpu_var(x2apic_extra_bits);
+
+	return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+	unsigned long x;
+
+	/* maskout x2apic_extra_bits ? */
+	x = id;
+	return x;
+}
+
+static unsigned int uv_read_apic_id(void)
+{
+
+	return x2apic_get_apic_id(apic_read(APIC_ID));
+}
+
+static int uv_phys_pkg_id(int initial_apicid, int index_msb)
+{
+	return uv_read_apic_id() >> index_msb;
+}
+
+static void uv_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+
+struct apic apic_x2apic_uv_x = {
+
+	.name				= "UV large system",
+	.probe				= NULL,
+	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
+	.apic_id_registered		= uv_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	.irq_dest_mode			= 1, /* logical */
+
+	.target_cpus			= uv_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= NULL,
+	.check_apicid_present		= NULL,
+
+	.vector_allocation_domain	= uv_vector_allocation_domain,
+	.init_apic_ldr			= uv_init_apic_ldr,
+
+	.ioapic_phys_id_map		= NULL,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= NULL,
+	.cpu_to_logical_apicid		= NULL,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= NULL,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= uv_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= x2apic_get_apic_id,
+	.set_apic_id			= set_apic_id,
+	.apic_id_mask			= 0xFFFFFFFFu,
+
+	.cpu_mask_to_apicid		= uv_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= uv_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= uv_send_IPI_mask,
+	.send_IPI_mask_allbutself	= uv_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= uv_send_IPI_allbutself,
+	.send_IPI_all			= uv_send_IPI_all,
+	.send_IPI_self			= uv_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+	.wait_for_init_deassert		= NULL,
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_msr_read,
+	.write				= native_apic_msr_write,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= native_x2apic_icr_write,
+	.wait_icr_idle			= native_x2apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
+};
+
+static __cpuinit void set_x2apic_extra_bits(int pnode)
+{
+	__get_cpu_var(x2apic_extra_bits) = (pnode << 6);
+}
+
+/*
+ * Called on boot cpu.
+ */
+static __init int boot_pnode_to_blade(int pnode)
+{
+	int blade;
+
+	for (blade = 0; blade < uv_num_possible_blades(); blade++)
+		if (pnode == uv_blade_info[blade].pnode)
+			return blade;
+	BUG();
+}
+
+struct redir_addr {
+	unsigned long redirect;
+	unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+		alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+		if (alias.s.base == 0) {
+			*size = (1UL << alias.s.m_alias);
+			redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+			*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+			return;
+		}
+	}
+	BUG();
+}
+
+static __init void map_low_mmrs(void)
+{
+	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
+	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
+}
+
+enum map_type {map_wb, map_uc};
+
+static __init void map_high(char *id, unsigned long base, int shift,
+			    int max_pnode, enum map_type map_type)
+{
+	unsigned long bytes, paddr;
+
+	paddr = base << shift;
+	bytes = (1UL << shift) * (max_pnode + 1);
+	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
+	       					paddr + bytes);
+	if (map_type == map_uc)
+		init_extra_mapping_uc(paddr, bytes);
+	else
+		init_extra_mapping_wb(paddr, bytes);
+
+}
+static __init void map_gru_high(int max_pnode)
+{
+	union uvh_rh_gam_gru_overlay_config_mmr_u gru;
+	int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
+	if (gru.s.enable)
+		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+}
+
+static __init void map_config_high(int max_pnode)
+{
+	union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
+	int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
+	if (cfg.s.enable)
+		map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
+}
+
+static __init void map_mmr_high(int max_pnode)
+{
+	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
+	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
+	if (mmr.s.enable)
+		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+}
+
+static __init void map_mmioh_high(int max_pnode)
+{
+	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
+	int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
+	if (mmioh.s.enable)
+		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+}
+
+static __init void uv_rtc_init(void)
+{
+	long status;
+	u64 ticks_per_sec;
+
+	status = uv_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK,
+					&ticks_per_sec);
+	if (status != BIOS_STATUS_SUCCESS || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
+/*
+ * percpu heartbeat timer
+ */
+static void uv_heartbeat(unsigned long ignored)
+{
+	struct timer_list *timer = &uv_hub_info->scir.timer;
+	unsigned char bits = uv_hub_info->scir.state;
+
+	/* flip heartbeat bit */
+	bits ^= SCIR_CPU_HEARTBEAT;
+
+	/* is this cpu idle? */
+	if (idle_cpu(raw_smp_processor_id()))
+		bits &= ~SCIR_CPU_ACTIVITY;
+	else
+		bits |= SCIR_CPU_ACTIVITY;
+
+	/* update system controller interface reg */
+	uv_set_scir_bits(bits);
+
+	/* enable next timer period */
+	mod_timer(timer, jiffies + SCIR_CPU_HB_INTERVAL);
+}
+
+static void __cpuinit uv_heartbeat_enable(int cpu)
+{
+	if (!uv_cpu_hub_info(cpu)->scir.enabled) {
+		struct timer_list *timer = &uv_cpu_hub_info(cpu)->scir.timer;
+
+		uv_set_cpu_scir_bits(cpu, SCIR_CPU_HEARTBEAT|SCIR_CPU_ACTIVITY);
+		setup_timer(timer, uv_heartbeat, cpu);
+		timer->expires = jiffies + SCIR_CPU_HB_INTERVAL;
+		add_timer_on(timer, cpu);
+		uv_cpu_hub_info(cpu)->scir.enabled = 1;
+	}
+
+	/* check boot cpu */
+	if (!uv_cpu_hub_info(0)->scir.enabled)
+		uv_heartbeat_enable(0);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __cpuinit uv_heartbeat_disable(int cpu)
+{
+	if (uv_cpu_hub_info(cpu)->scir.enabled) {
+		uv_cpu_hub_info(cpu)->scir.enabled = 0;
+		del_timer(&uv_cpu_hub_info(cpu)->scir.timer);
+	}
+	uv_set_cpu_scir_bits(cpu, 0xff);
+}
+
+/*
+ * cpu hotplug notifier
+ */
+static __cpuinit int uv_scir_cpu_notify(struct notifier_block *self,
+				       unsigned long action, void *hcpu)
+{
+	long cpu = (long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		uv_heartbeat_enable(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+		uv_heartbeat_disable(cpu);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static __init void uv_scir_register_cpu_notifier(void)
+{
+	hotcpu_notifier(uv_scir_cpu_notify, 0);
+}
+
+#else /* !CONFIG_HOTPLUG_CPU */
+
+static __init void uv_scir_register_cpu_notifier(void)
+{
+}
+
+static __init int uv_init_heartbeat(void)
+{
+	int cpu;
+
+	if (is_uv_system())
+		for_each_online_cpu(cpu)
+			uv_heartbeat_enable(cpu);
+	return 0;
+}
+
+late_initcall(uv_init_heartbeat);
+
+#endif /* !CONFIG_HOTPLUG_CPU */
+
+/*
+ * Called on each cpu to initialize the per_cpu UV data area.
+ * 	ZZZ hotplug not supported yet
+ */
+void __cpuinit uv_cpu_init(void)
+{
+	/* CPU 0 initilization will be done via uv_system_init. */
+	if (!uv_blade_info)
+		return;
+
+	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
+
+	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
+		set_x2apic_extra_bits(uv_hub_info->pnode);
+}
+
+
+void __init uv_system_init(void)
+{
+	union uvh_si_addr_map_config_u m_n_config;
+	union uvh_node_id_u node_id;
+	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
+	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+	int max_pnode = 0;
+	unsigned long mmr_base, present;
+
+	map_low_mmrs();
+
+	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	m_val = m_n_config.s.m_skt;
+	n_val = m_n_config.s.n_skt;
+	mmr_base =
+	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+	    ~UV_MMR_ENABLE;
+	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+	for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
+		uv_possible_blades +=
+		  hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
+	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
+
+	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
+	uv_blade_info = kmalloc(bytes, GFP_KERNEL);
+
+	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+
+	bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
+	uv_node_to_blade = kmalloc(bytes, GFP_KERNEL);
+	memset(uv_node_to_blade, 255, bytes);
+
+	bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
+	uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL);
+	memset(uv_cpu_to_blade, 255, bytes);
+
+	blade = 0;
+	for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) {
+		present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8);
+		for (j = 0; j < 64; j++) {
+			if (!test_bit(j, &present))
+				continue;
+			uv_blade_info[blade].pnode = (i * 64 + j);
+			uv_blade_info[blade].nr_possible_cpus = 0;
+			uv_blade_info[blade].nr_online_cpus = 0;
+			blade++;
+		}
+	}
+
+	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+	gnode_upper = (((unsigned long)node_id.s.node_id) &
+		       ~((1 << n_val) - 1)) << m_val;
+
+	uv_bios_init();
+	uv_bios_get_sn_info(0, &uv_type, &sn_partition_id,
+			    &sn_coherency_id, &sn_region_size);
+	uv_rtc_init();
+
+	for_each_present_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
+		blade = boot_pnode_to_blade(pnode);
+		lcpu = uv_blade_info[blade].nr_possible_cpus;
+		uv_blade_info[blade].nr_possible_cpus++;
+
+		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+		uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
+		uv_cpu_hub_info(cpu)->m_val = m_val;
+		uv_cpu_hub_info(cpu)->n_val = m_val;
+		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
+		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
+		uv_cpu_hub_info(cpu)->pnode = pnode;
+		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+		uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id;
+		uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu;
+		uv_node_to_blade[nid] = blade;
+		uv_cpu_to_blade[cpu] = blade;
+		max_pnode = max(pnode, max_pnode);
+
+		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, "
+			"lcpu %d, blade %d\n",
+			cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
+			lcpu, blade);
+	}
+
+	map_gru_high(max_pnode);
+	map_mmr_high(max_pnode);
+	map_config_high(max_pnode);
+	map_mmioh_high(max_pnode);
+
+	uv_cpu_init();
+	uv_scir_register_cpu_notifier();
+	proc_mkdir("sgi_uv", NULL);
+}
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
deleted file mode 100644
index 70935dd904d..00000000000
--- a/arch/x86/kernel/genapic_64.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch probe layer.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/hardirq.h>
-#include <linux/dmar.h>
-
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-#include <asm/setup.h>
-
-extern struct apic apic_flat;
-extern struct apic apic_physflat;
-extern struct apic apic_x2xpic_uv_x;
-extern struct apic apic_x2apic_phys;
-extern struct apic apic_x2apic_cluster;
-
-struct apic __read_mostly *apic = &apic_flat;
-EXPORT_SYMBOL_GPL(apic);
-
-static struct apic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_UV
-	&apic_x2apic_uv_x,
-#endif
-#ifdef CONFIG_X86_X2APIC
-	&apic_x2apic_phys,
-	&apic_x2apic_cluster,
-#endif
-	&apic_physflat,
-	NULL,
-};
-
-/*
- * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
- */
-void __init default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_X2APIC
-	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
-		if (!intr_remapping_enabled)
-			apic = &apic_flat;
-	}
-#endif
-
-	if (apic == &apic_flat) {
-		if (max_physical_apicid >= 8)
-			apic = &apic_physflat;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
-	}
-
-	if (x86_quirks->update_apic)
-		x86_quirks->update_apic();
-}
-
-/* Same for both flat and physical. */
-
-void apic_send_IPI_self(int vector)
-{
-	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
-}
-
-int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	int i;
-
-	for (i = 0; apic_probe[i]; ++i) {
-		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
-			apic = apic_probe[i];
-			printk(KERN_INFO "Setting APIC routing to %s.\n",
-				apic->name);
-			return 1;
-		}
-	}
-	return 0;
-}
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
deleted file mode 100644
index 3b002995e14..00000000000
--- a/arch/x86/kernel/genapic_flat_64.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Flat APIC subarch code.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-#include <linux/errno.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/hardirq.h>
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 1;
-}
-
-static const struct cpumask *flat_target_cpus(void)
-{
-	return cpu_online_mask;
-}
-
-static void flat_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	cpumask_clear(retmask);
-	cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static void flat_init_apic_ldr(void)
-{
-	unsigned long val;
-	unsigned long num, id;
-
-	num = smp_processor_id();
-	id = 1UL << num;
-	apic_write(APIC_DFR, APIC_DFR_FLAT);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
-	local_irq_restore(flags);
-}
-
-static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-
-	_flat_send_IPI_mask(mask, vector);
-}
-
-static void
- flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-	int cpu = smp_processor_id();
-
-	if (cpu < BITS_PER_LONG)
-		clear_bit(cpu, &mask);
-
-	_flat_send_IPI_mask(mask, vector);
-}
-
-static void flat_send_IPI_allbutself(int vector)
-{
-	int cpu = smp_processor_id();
-#ifdef	CONFIG_HOTPLUG_CPU
-	int hotplug = 1;
-#else
-	int hotplug = 0;
-#endif
-	if (hotplug || vector == NMI_VECTOR) {
-		if (!cpumask_equal(cpu_online_mask, cpumask_of(cpu))) {
-			unsigned long mask = cpumask_bits(cpu_online_mask)[0];
-
-			if (cpu < BITS_PER_LONG)
-				clear_bit(cpu, &mask);
-
-			_flat_send_IPI_mask(mask, vector);
-		}
-	} else if (num_online_cpus() > 1) {
-		__default_send_IPI_shortcut(APIC_DEST_ALLBUT,
-					    vector, apic->dest_logical);
-	}
-}
-
-static void flat_send_IPI_all(int vector)
-{
-	if (vector == NMI_VECTOR) {
-		flat_send_IPI_mask(cpu_online_mask, vector);
-	} else {
-		__default_send_IPI_shortcut(APIC_DEST_ALLINC,
-					    vector, apic->dest_logical);
-	}
-}
-
-static unsigned int flat_get_apic_id(unsigned long x)
-{
-	unsigned int id;
-
-	id = (((x)>>24) & 0xFFu);
-
-	return id;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	unsigned long x;
-
-	x = ((id & 0xFFu)<<24);
-	return x;
-}
-
-static unsigned int read_xapic_id(void)
-{
-	unsigned int id;
-
-	id = flat_get_apic_id(apic_read(APIC_ID));
-	return id;
-}
-
-static int flat_apic_id_registered(void)
-{
-	return physid_isset(read_xapic_id(), phys_cpu_present_map);
-}
-
-static unsigned int flat_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	return cpumask_bits(cpumask)[0] & APIC_ALL_CPUS;
-}
-
-static unsigned int flat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-						const struct cpumask *andmask)
-{
-	unsigned long mask1 = cpumask_bits(cpumask)[0] & APIC_ALL_CPUS;
-	unsigned long mask2 = cpumask_bits(andmask)[0] & APIC_ALL_CPUS;
-
-	return mask1 & mask2;
-}
-
-static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-struct apic apic_flat =  {
-	.name				= "flat",
-	.probe				= NULL,
-	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
-	.apic_id_registered		= flat_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	.irq_dest_mode			= 1, /* logical */
-
-	.target_cpus			= flat_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
-
-	.vector_allocation_domain	= flat_vector_allocation_domain,
-	.init_apic_ldr			= flat_init_apic_ldr,
-
-	.ioapic_phys_id_map		= NULL,
-	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= NULL,
-	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= flat_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= flat_get_apic_id,
-	.set_apic_id			= set_apic_id,
-	.apic_id_mask			= 0xFFu << 24,
-
-	.cpu_mask_to_apicid		= flat_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= flat_send_IPI_mask,
-	.send_IPI_mask_allbutself	= flat_send_IPI_mask_allbutself,
-	.send_IPI_allbutself		= flat_send_IPI_allbutself,
-	.send_IPI_all			= flat_send_IPI_all,
-	.send_IPI_self			= apic_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= NULL,
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= NULL,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
-
-/*
- * Physflat mode is used when there are more than 8 CPUs on a AMD system.
- * We cannot use logical delivery in this case because the mask
- * overflows, so use physical mode.
- */
-static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-#ifdef CONFIG_ACPI
-	/*
-	 * Quirk: some x86_64 machines can only use physical APIC mode
-	 * regardless of how many processors are present (x86_64 ES7000
-	 * is an example).
-	 */
-	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
-		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
-		printk(KERN_DEBUG "system APIC only can use physical flat");
-		return 1;
-	}
-#endif
-
-	return 0;
-}
-
-static const struct cpumask *physflat_target_cpus(void)
-{
-	return cpu_online_mask;
-}
-
-static void physflat_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
-	default_send_IPI_mask_sequence_phys(cpumask, vector);
-}
-
-static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
-					      int vector)
-{
-	default_send_IPI_mask_allbutself_phys(cpumask, vector);
-}
-
-static void physflat_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
-}
-
-static void physflat_send_IPI_all(int vector)
-{
-	physflat_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static unsigned int physflat_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	cpu = cpumask_first(cpumask);
-	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
-	else
-		return BAD_APICID;
-}
-
-static unsigned int
-physflat_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-				const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-	if (cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
-
-	return BAD_APICID;
-}
-
-struct apic apic_physflat =  {
-
-	.name				= "physical flat",
-	.probe				= NULL,
-	.acpi_madt_oem_check		= physflat_acpi_madt_oem_check,
-	.apic_id_registered		= flat_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= 0, /* physical */
-
-	.target_cpus			= physflat_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= 0,
-	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
-
-	.vector_allocation_domain	= physflat_vector_allocation_domain,
-	/* not needed, but shouldn't hurt: */
-	.init_apic_ldr			= flat_init_apic_ldr,
-
-	.ioapic_phys_id_map		= NULL,
-	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= NULL,
-	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= flat_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= flat_get_apic_id,
-	.set_apic_id			= set_apic_id,
-	.apic_id_mask			= 0xFFu << 24,
-
-	.cpu_mask_to_apicid		= physflat_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= physflat_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= physflat_send_IPI_mask,
-	.send_IPI_mask_allbutself	= physflat_send_IPI_mask_allbutself,
-	.send_IPI_allbutself		= physflat_send_IPI_allbutself,
-	.send_IPI_all			= physflat_send_IPI_all,
-	.send_IPI_self			= apic_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= NULL,
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= NULL,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c
deleted file mode 100644
index 4e39d9ad4d5..00000000000
--- a/arch/x86/kernel/genx2apic_cluster.c
+++ /dev/null
@@ -1,243 +0,0 @@
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/dmar.h>
-
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
-
-static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (cpu_has_x2apic)
-		return 1;
-
-	return 0;
-}
-
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
-static const struct cpumask *x2apic_target_cpus(void)
-{
-	return cpumask_of(0);
-}
-
-/*
- * for now each logical cpu is in its own vector allocation domain.
- */
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void
- __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest)
-{
-	unsigned long cfg;
-
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * send the IPI.
-	 */
-	native_x2apic_icr_write(cfg, apicid);
-}
-
-/*
- * for now, we send the IPI's one by one in the cpumask.
- * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
- * at once. We have 16 cpu's in a cluster. This will minimize IPI register
- * writes.
- */
-static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		__x2apic_send_IPI_dest(
-			per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-			vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
-}
-
-static void
- x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
-{
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
-}
-
-static void x2apic_send_IPI_allbutself(int vector)
-{
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for_each_online_cpu(query_cpu) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_logical_apicid, query_cpu),
-				vector, apic->dest_logical);
-	}
-	local_irq_restore(flags);
-}
-
-static void x2apic_send_IPI_all(int vector)
-{
-	x2apic_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int x2apic_apic_id_registered(void)
-{
-	return 1;
-}
-
-static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	/*
-	 * We're using fixed IRQ delivery, can only return one logical APIC ID.
-	 * May as well be the first.
-	 */
-	int cpu = cpumask_first(cpumask);
-
-	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_logical_apicid, cpu);
-	else
-		return BAD_APICID;
-}
-
-static unsigned int
-x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			      const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one logical APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-
-	if (cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_logical_apicid, cpu);
-
-	return BAD_APICID;
-}
-
-static unsigned int x2apic_cluster_phys_get_apic_id(unsigned long x)
-{
-	unsigned int id;
-
-	id = x;
-	return id;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	unsigned long x;
-
-	x = id;
-	return x;
-}
-
-static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return current_cpu_data.initial_apicid >> index_msb;
-}
-
-static void x2apic_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
-static void init_x2apic_ldr(void)
-{
-	int cpu = smp_processor_id();
-
-	per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
-}
-
-struct apic apic_x2apic_cluster = {
-
-	.name				= "cluster x2apic",
-	.probe				= NULL,
-	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
-	.apic_id_registered		= x2apic_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	.irq_dest_mode			= 1, /* logical */
-
-	.target_cpus			= x2apic_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
-
-	.vector_allocation_domain	= x2apic_vector_allocation_domain,
-	.init_apic_ldr			= init_x2apic_ldr,
-
-	.ioapic_phys_id_map		= NULL,
-	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= NULL,
-	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= x2apic_cluster_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= x2apic_cluster_phys_get_apic_id,
-	.set_apic_id			= set_apic_id,
-	.apic_id_mask			= 0xFFFFFFFFu,
-
-	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= x2apic_send_IPI_mask,
-	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
-	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
-	.send_IPI_all			= x2apic_send_IPI_all,
-	.send_IPI_self			= x2apic_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= NULL,
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= NULL,
-
-	.read				= native_apic_msr_read,
-	.write				= native_apic_msr_write,
-	.icr_read			= native_x2apic_icr_read,
-	.icr_write			= native_x2apic_icr_write,
-	.wait_icr_idle			= native_x2apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
-};
diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c
deleted file mode 100644
index d2d52eb9f7e..00000000000
--- a/arch/x86/kernel/genx2apic_phys.c
+++ /dev/null
@@ -1,229 +0,0 @@
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/dmar.h>
-
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-static int x2apic_phys;
-
-static int set_x2apic_phys_mode(char *arg)
-{
-	x2apic_phys = 1;
-	return 0;
-}
-early_param("x2apic_phys", set_x2apic_phys_mode);
-
-static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (cpu_has_x2apic && x2apic_phys)
-		return 1;
-
-	return 0;
-}
-
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
-static const struct cpumask *x2apic_target_cpus(void)
-{
-	return cpumask_of(0);
-}
-
-static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
-				   unsigned int dest)
-{
-	unsigned long cfg;
-
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * send the IPI.
-	 */
-	native_x2apic_icr_write(cfg, apicid);
-}
-
-static void x2apic_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
-				       vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-static void
- x2apic_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
-{
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu != this_cpu)
-			__x2apic_send_IPI_dest(
-				per_cpu(x86_cpu_to_apicid, query_cpu),
-				vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-static void x2apic_send_IPI_allbutself(int vector)
-{
-	unsigned long this_cpu = smp_processor_id();
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for_each_online_cpu(query_cpu) {
-		if (query_cpu == this_cpu)
-			continue;
-		__x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
-				       vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-static void x2apic_send_IPI_all(int vector)
-{
-	x2apic_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int x2apic_apic_id_registered(void)
-{
-	return 1;
-}
-
-static unsigned int x2apic_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	int cpu = cpumask_first(cpumask);
-
-	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
-	else
-		return BAD_APICID;
-}
-
-static unsigned int
-x2apic_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			      const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-
-	if (cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
-
-	return BAD_APICID;
-}
-
-static unsigned int x2apic_phys_get_apic_id(unsigned long x)
-{
-	return x;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	return id;
-}
-
-static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return current_cpu_data.initial_apicid >> index_msb;
-}
-
-static void x2apic_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
-static void init_x2apic_ldr(void)
-{
-}
-
-struct apic apic_x2apic_phys = {
-
-	.name				= "physical x2apic",
-	.probe				= NULL,
-	.acpi_madt_oem_check		= x2apic_acpi_madt_oem_check,
-	.apic_id_registered		= x2apic_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= 0, /* physical */
-
-	.target_cpus			= x2apic_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= 0,
-	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
-
-	.vector_allocation_domain	= x2apic_vector_allocation_domain,
-	.init_apic_ldr			= init_x2apic_ldr,
-
-	.ioapic_phys_id_map		= NULL,
-	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= NULL,
-	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= x2apic_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= x2apic_phys_get_apic_id,
-	.set_apic_id			= set_apic_id,
-	.apic_id_mask			= 0xFFFFFFFFu,
-
-	.cpu_mask_to_apicid		= x2apic_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= x2apic_send_IPI_mask,
-	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
-	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
-	.send_IPI_all			= x2apic_send_IPI_all,
-	.send_IPI_self			= x2apic_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= NULL,
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= NULL,
-
-	.read				= native_apic_msr_read,
-	.write				= native_apic_msr_write,
-	.icr_read			= native_x2apic_icr_read,
-	.icr_write			= native_x2apic_icr_write,
-	.wait_icr_idle			= native_x2apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
-};
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
deleted file mode 100644
index 20b4ad07c3a..00000000000
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV APIC functions (note: not an Intel compatible APIC)
- *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/hardirq.h>
-#include <linux/timer.h>
-#include <linux/proc_fs.h>
-#include <asm/current.h>
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-#include <asm/pgtable.h>
-#include <asm/uv/uv.h>
-#include <asm/uv/uv_mmrs.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/bios.h>
-
-DEFINE_PER_CPU(int, x2apic_extra_bits);
-
-static enum uv_system_type uv_system_type;
-
-static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (!strcmp(oem_id, "SGI")) {
-		if (!strcmp(oem_table_id, "UVL"))
-			uv_system_type = UV_LEGACY_APIC;
-		else if (!strcmp(oem_table_id, "UVX"))
-			uv_system_type = UV_X2APIC;
-		else if (!strcmp(oem_table_id, "UVH")) {
-			uv_system_type = UV_NON_UNIQUE_APIC;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-enum uv_system_type get_uv_system_type(void)
-{
-	return uv_system_type;
-}
-
-int is_uv_system(void)
-{
-	return uv_system_type != UV_NONE;
-}
-EXPORT_SYMBOL_GPL(is_uv_system);
-
-DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
-EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
-
-struct uv_blade_info *uv_blade_info;
-EXPORT_SYMBOL_GPL(uv_blade_info);
-
-short *uv_node_to_blade;
-EXPORT_SYMBOL_GPL(uv_node_to_blade);
-
-short *uv_cpu_to_blade;
-EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
-
-short uv_possible_blades;
-EXPORT_SYMBOL_GPL(uv_possible_blades);
-
-unsigned long sn_rtc_cycles_per_second;
-EXPORT_SYMBOL(sn_rtc_cycles_per_second);
-
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
-static const struct cpumask *uv_target_cpus(void)
-{
-	return cpumask_of(0);
-}
-
-static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	cpumask_clear(retmask);
-	cpumask_set_cpu(cpu, retmask);
-}
-
-int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
-{
-	unsigned long val;
-	int pnode;
-
-	pnode = uv_apicid_to_pnode(phys_apicid);
-	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
-	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
-	    APIC_DM_INIT;
-	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
-	mdelay(10);
-
-	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
-	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
-	    APIC_DM_STARTUP;
-	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
-	return 0;
-}
-
-static void uv_send_IPI_one(int cpu, int vector)
-{
-	unsigned long val, apicid;
-	int pnode;
-
-	apicid = per_cpu(x86_cpu_to_apicid, cpu);
-	pnode = uv_apicid_to_pnode(apicid);
-
-	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
-	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	      (vector << UVH_IPI_INT_VECTOR_SHFT);
-
-	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
-}
-
-static void uv_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	unsigned int cpu;
-
-	for_each_cpu(cpu, mask)
-		uv_send_IPI_one(cpu, vector);
-}
-
-static void uv_send_IPI_mask_allbutself(const struct cpumask *mask, int vector)
-{
-	unsigned int this_cpu = smp_processor_id();
-	unsigned int cpu;
-
-	for_each_cpu(cpu, mask) {
-		if (cpu != this_cpu)
-			uv_send_IPI_one(cpu, vector);
-	}
-}
-
-static void uv_send_IPI_allbutself(int vector)
-{
-	unsigned int this_cpu = smp_processor_id();
-	unsigned int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpu != this_cpu)
-			uv_send_IPI_one(cpu, vector);
-	}
-}
-
-static void uv_send_IPI_all(int vector)
-{
-	uv_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int uv_apic_id_registered(void)
-{
-	return 1;
-}
-
-static void uv_init_apic_ldr(void)
-{
-}
-
-static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
-{
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	int cpu = cpumask_first(cpumask);
-
-	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
-	else
-		return BAD_APICID;
-}
-
-static unsigned int
-uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			  const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-	if (cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
-
-	return BAD_APICID;
-}
-
-static unsigned int x2apic_get_apic_id(unsigned long x)
-{
-	unsigned int id;
-
-	WARN_ON(preemptible() && num_online_cpus() > 1);
-	id = x | __get_cpu_var(x2apic_extra_bits);
-
-	return id;
-}
-
-static unsigned long set_apic_id(unsigned int id)
-{
-	unsigned long x;
-
-	/* maskout x2apic_extra_bits ? */
-	x = id;
-	return x;
-}
-
-static unsigned int uv_read_apic_id(void)
-{
-
-	return x2apic_get_apic_id(apic_read(APIC_ID));
-}
-
-static int uv_phys_pkg_id(int initial_apicid, int index_msb)
-{
-	return uv_read_apic_id() >> index_msb;
-}
-
-static void uv_send_IPI_self(int vector)
-{
-	apic_write(APIC_SELF_IPI, vector);
-}
-
-struct apic apic_x2apic_uv_x = {
-
-	.name				= "UV large system",
-	.probe				= NULL,
-	.acpi_madt_oem_check		= uv_acpi_madt_oem_check,
-	.apic_id_registered		= uv_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= 1, /* logical */
-
-	.target_cpus			= uv_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= NULL,
-	.check_apicid_present		= NULL,
-
-	.vector_allocation_domain	= uv_vector_allocation_domain,
-	.init_apic_ldr			= uv_init_apic_ldr,
-
-	.ioapic_phys_id_map		= NULL,
-	.setup_apic_routing		= NULL,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= NULL,
-	.cpu_to_logical_apicid		= NULL,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= NULL,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= uv_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= x2apic_get_apic_id,
-	.set_apic_id			= set_apic_id,
-	.apic_id_mask			= 0xFFFFFFFFu,
-
-	.cpu_mask_to_apicid		= uv_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= uv_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= uv_send_IPI_mask,
-	.send_IPI_mask_allbutself	= uv_send_IPI_mask_allbutself,
-	.send_IPI_allbutself		= uv_send_IPI_allbutself,
-	.send_IPI_all			= uv_send_IPI_all,
-	.send_IPI_self			= uv_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-	.wait_for_init_deassert		= NULL,
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= NULL,
-
-	.read				= native_apic_msr_read,
-	.write				= native_apic_msr_write,
-	.icr_read			= native_x2apic_icr_read,
-	.icr_write			= native_x2apic_icr_write,
-	.wait_icr_idle			= native_x2apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
-};
-
-static __cpuinit void set_x2apic_extra_bits(int pnode)
-{
-	__get_cpu_var(x2apic_extra_bits) = (pnode << 6);
-}
-
-/*
- * Called on boot cpu.
- */
-static __init int boot_pnode_to_blade(int pnode)
-{
-	int blade;
-
-	for (blade = 0; blade < uv_num_possible_blades(); blade++)
-		if (pnode == uv_blade_info[blade].pnode)
-			return blade;
-	BUG();
-}
-
-struct redir_addr {
-	unsigned long redirect;
-	unsigned long alias;
-};
-
-#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
-
-static __initdata struct redir_addr redir_addrs[] = {
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
-};
-
-static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
-{
-	union uvh_si_alias0_overlay_config_u alias;
-	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
-		alias.v = uv_read_local_mmr(redir_addrs[i].alias);
-		if (alias.s.base == 0) {
-			*size = (1UL << alias.s.m_alias);
-			redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
-			*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
-			return;
-		}
-	}
-	BUG();
-}
-
-static __init void map_low_mmrs(void)
-{
-	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
-	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
-}
-
-enum map_type {map_wb, map_uc};
-
-static __init void map_high(char *id, unsigned long base, int shift,
-			    int max_pnode, enum map_type map_type)
-{
-	unsigned long bytes, paddr;
-
-	paddr = base << shift;
-	bytes = (1UL << shift) * (max_pnode + 1);
-	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
-	       					paddr + bytes);
-	if (map_type == map_uc)
-		init_extra_mapping_uc(paddr, bytes);
-	else
-		init_extra_mapping_wb(paddr, bytes);
-
-}
-static __init void map_gru_high(int max_pnode)
-{
-	union uvh_rh_gam_gru_overlay_config_mmr_u gru;
-	int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
-	if (gru.s.enable)
-		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
-}
-
-static __init void map_config_high(int max_pnode)
-{
-	union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
-	int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
-	if (cfg.s.enable)
-		map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmr_high(int max_pnode)
-{
-	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
-	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
-	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmioh_high(int max_pnode)
-{
-	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
-	int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
-	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void uv_rtc_init(void)
-{
-	long status;
-	u64 ticks_per_sec;
-
-	status = uv_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK,
-					&ticks_per_sec);
-	if (status != BIOS_STATUS_SUCCESS || ticks_per_sec < 100000) {
-		printk(KERN_WARNING
-			"unable to determine platform RTC clock frequency, "
-			"guessing.\n");
-		/* BIOS gives wrong value for clock freq. so guess */
-		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
-	} else
-		sn_rtc_cycles_per_second = ticks_per_sec;
-}
-
-/*
- * percpu heartbeat timer
- */
-static void uv_heartbeat(unsigned long ignored)
-{
-	struct timer_list *timer = &uv_hub_info->scir.timer;
-	unsigned char bits = uv_hub_info->scir.state;
-
-	/* flip heartbeat bit */
-	bits ^= SCIR_CPU_HEARTBEAT;
-
-	/* is this cpu idle? */
-	if (idle_cpu(raw_smp_processor_id()))
-		bits &= ~SCIR_CPU_ACTIVITY;
-	else
-		bits |= SCIR_CPU_ACTIVITY;
-
-	/* update system controller interface reg */
-	uv_set_scir_bits(bits);
-
-	/* enable next timer period */
-	mod_timer(timer, jiffies + SCIR_CPU_HB_INTERVAL);
-}
-
-static void __cpuinit uv_heartbeat_enable(int cpu)
-{
-	if (!uv_cpu_hub_info(cpu)->scir.enabled) {
-		struct timer_list *timer = &uv_cpu_hub_info(cpu)->scir.timer;
-
-		uv_set_cpu_scir_bits(cpu, SCIR_CPU_HEARTBEAT|SCIR_CPU_ACTIVITY);
-		setup_timer(timer, uv_heartbeat, cpu);
-		timer->expires = jiffies + SCIR_CPU_HB_INTERVAL;
-		add_timer_on(timer, cpu);
-		uv_cpu_hub_info(cpu)->scir.enabled = 1;
-	}
-
-	/* check boot cpu */
-	if (!uv_cpu_hub_info(0)->scir.enabled)
-		uv_heartbeat_enable(0);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void __cpuinit uv_heartbeat_disable(int cpu)
-{
-	if (uv_cpu_hub_info(cpu)->scir.enabled) {
-		uv_cpu_hub_info(cpu)->scir.enabled = 0;
-		del_timer(&uv_cpu_hub_info(cpu)->scir.timer);
-	}
-	uv_set_cpu_scir_bits(cpu, 0xff);
-}
-
-/*
- * cpu hotplug notifier
- */
-static __cpuinit int uv_scir_cpu_notify(struct notifier_block *self,
-				       unsigned long action, void *hcpu)
-{
-	long cpu = (long)hcpu;
-
-	switch (action) {
-	case CPU_ONLINE:
-		uv_heartbeat_enable(cpu);
-		break;
-	case CPU_DOWN_PREPARE:
-		uv_heartbeat_disable(cpu);
-		break;
-	default:
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static __init void uv_scir_register_cpu_notifier(void)
-{
-	hotcpu_notifier(uv_scir_cpu_notify, 0);
-}
-
-#else /* !CONFIG_HOTPLUG_CPU */
-
-static __init void uv_scir_register_cpu_notifier(void)
-{
-}
-
-static __init int uv_init_heartbeat(void)
-{
-	int cpu;
-
-	if (is_uv_system())
-		for_each_online_cpu(cpu)
-			uv_heartbeat_enable(cpu);
-	return 0;
-}
-
-late_initcall(uv_init_heartbeat);
-
-#endif /* !CONFIG_HOTPLUG_CPU */
-
-/*
- * Called on each cpu to initialize the per_cpu UV data area.
- * 	ZZZ hotplug not supported yet
- */
-void __cpuinit uv_cpu_init(void)
-{
-	/* CPU 0 initilization will be done via uv_system_init. */
-	if (!uv_blade_info)
-		return;
-
-	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
-
-	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
-		set_x2apic_extra_bits(uv_hub_info->pnode);
-}
-
-
-void __init uv_system_init(void)
-{
-	union uvh_si_addr_map_config_u m_n_config;
-	union uvh_node_id_u node_id;
-	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
-	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
-	int max_pnode = 0;
-	unsigned long mmr_base, present;
-
-	map_low_mmrs();
-
-	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
-	m_val = m_n_config.s.m_skt;
-	n_val = m_n_config.s.n_skt;
-	mmr_base =
-	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
-	    ~UV_MMR_ENABLE;
-	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
-
-	for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
-		uv_possible_blades +=
-		  hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));
-	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
-
-	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
-	uv_blade_info = kmalloc(bytes, GFP_KERNEL);
-
-	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
-
-	bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
-	uv_node_to_blade = kmalloc(bytes, GFP_KERNEL);
-	memset(uv_node_to_blade, 255, bytes);
-
-	bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
-	uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL);
-	memset(uv_cpu_to_blade, 255, bytes);
-
-	blade = 0;
-	for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) {
-		present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8);
-		for (j = 0; j < 64; j++) {
-			if (!test_bit(j, &present))
-				continue;
-			uv_blade_info[blade].pnode = (i * 64 + j);
-			uv_blade_info[blade].nr_possible_cpus = 0;
-			uv_blade_info[blade].nr_online_cpus = 0;
-			blade++;
-		}
-	}
-
-	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
-	gnode_upper = (((unsigned long)node_id.s.node_id) &
-		       ~((1 << n_val) - 1)) << m_val;
-
-	uv_bios_init();
-	uv_bios_get_sn_info(0, &uv_type, &sn_partition_id,
-			    &sn_coherency_id, &sn_region_size);
-	uv_rtc_init();
-
-	for_each_present_cpu(cpu) {
-		nid = cpu_to_node(cpu);
-		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
-		blade = boot_pnode_to_blade(pnode);
-		lcpu = uv_blade_info[blade].nr_possible_cpus;
-		uv_blade_info[blade].nr_possible_cpus++;
-
-		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
-		uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
-		uv_cpu_hub_info(cpu)->m_val = m_val;
-		uv_cpu_hub_info(cpu)->n_val = m_val;
-		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
-		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
-		uv_cpu_hub_info(cpu)->pnode = pnode;
-		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
-		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
-		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
-		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
-		uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id;
-		uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu;
-		uv_node_to_blade[nid] = blade;
-		uv_cpu_to_blade[cpu] = blade;
-		max_pnode = max(pnode, max_pnode);
-
-		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, "
-			"lcpu %d, blade %d\n",
-			cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid,
-			lcpu, blade);
-	}
-
-	map_gru_high(max_pnode);
-	map_mmr_high(max_pnode);
-	map_config_high(max_pnode);
-	map_mmioh_high(max_pnode);
-
-	uv_cpu_init();
-	uv_scir_register_cpu_notifier();
-	proc_mkdir("sgi_uv", NULL);
-}
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
deleted file mode 100644
index 00e6071cefc..00000000000
--- a/arch/x86/kernel/io_apic.c
+++ /dev/null
@@ -1,4160 +0,0 @@
-/*
- *	Intel IO-APIC support for multi-Pentium hosts.
- *
- *	Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
- *
- *	Many thanks to Stig Venaas for trying out countless experimental
- *	patches and reporting/debugging problems patiently!
- *
- *	(c) 1999, Multiple IO-APIC support, developed by
- *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
- *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
- *	further tested and cleaned up by Zach Brown <zab@redhat.com>
- *	and Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively
- *	Paul Diefenbaugh	:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/mc146818rtc.h>
-#include <linux/compiler.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/msi.h>
-#include <linux/htirq.h>
-#include <linux/freezer.h>
-#include <linux/kthread.h>
-#include <linux/jiffies.h>	/* time_after() */
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-#include <linux/bootmem.h>
-#include <linux/dmar.h>
-#include <linux/hpet.h>
-
-#include <asm/idle.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/cpu.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-#include <asm/dma.h>
-#include <asm/timer.h>
-#include <asm/i8259.h>
-#include <asm/nmi.h>
-#include <asm/msidef.h>
-#include <asm/hypertransport.h>
-#include <asm/setup.h>
-#include <asm/irq_remapping.h>
-#include <asm/hpet.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/uv_irq.h>
-
-#include <asm/apic.h>
-
-#define __apicdebuginit(type) static type __init
-
-/*
- *      Is the SiS APIC rmw bug present ?
- *      -1 = don't know, 0 = no, 1 = yes
- */
-int sis_apic_bug = -1;
-
-static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
-
-/*
- * # of IRQ routing registers
- */
-int nr_ioapic_registers[MAX_IO_APICS];
-
-/* I/O APIC entries */
-struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
-int nr_ioapics;
-
-/* MP IRQ source entries */
-struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* # of MP IRQ source entries */
-int mp_irq_entries;
-
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-
-int skip_ioapic_setup;
-
-void arch_disable_smp_support(void)
-{
-#ifdef CONFIG_PCI
-	noioapicquirk = 1;
-	noioapicreroute = -1;
-#endif
-	skip_ioapic_setup = 1;
-}
-
-static int __init parse_noapic(char *str)
-{
-	/* disable IO-APIC */
-	arch_disable_smp_support();
-	return 0;
-}
-early_param("noapic", parse_noapic);
-
-struct irq_pin_list;
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
-struct irq_pin_list {
-	int apic, pin;
-	struct irq_pin_list *next;
-};
-
-static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
-{
-	struct irq_pin_list *pin;
-	int node;
-
-	node = cpu_to_node(cpu);
-
-	pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
-
-	return pin;
-}
-
-struct irq_cfg {
-	struct irq_pin_list *irq_2_pin;
-	cpumask_var_t domain;
-	cpumask_var_t old_domain;
-	unsigned move_cleanup_count;
-	u8 vector;
-	u8 move_in_progress : 1;
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-	u8 move_desc_pending : 1;
-#endif
-};
-
-/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
-#ifdef CONFIG_SPARSE_IRQ
-static struct irq_cfg irq_cfgx[] = {
-#else
-static struct irq_cfg irq_cfgx[NR_IRQS] = {
-#endif
-	[0]  = { .vector = IRQ0_VECTOR,  },
-	[1]  = { .vector = IRQ1_VECTOR,  },
-	[2]  = { .vector = IRQ2_VECTOR,  },
-	[3]  = { .vector = IRQ3_VECTOR,  },
-	[4]  = { .vector = IRQ4_VECTOR,  },
-	[5]  = { .vector = IRQ5_VECTOR,  },
-	[6]  = { .vector = IRQ6_VECTOR,  },
-	[7]  = { .vector = IRQ7_VECTOR,  },
-	[8]  = { .vector = IRQ8_VECTOR,  },
-	[9]  = { .vector = IRQ9_VECTOR,  },
-	[10] = { .vector = IRQ10_VECTOR, },
-	[11] = { .vector = IRQ11_VECTOR, },
-	[12] = { .vector = IRQ12_VECTOR, },
-	[13] = { .vector = IRQ13_VECTOR, },
-	[14] = { .vector = IRQ14_VECTOR, },
-	[15] = { .vector = IRQ15_VECTOR, },
-};
-
-int __init arch_early_irq_init(void)
-{
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
-	int count;
-	int i;
-
-	cfg = irq_cfgx;
-	count = ARRAY_SIZE(irq_cfgx);
-
-	for (i = 0; i < count; i++) {
-		desc = irq_to_desc(i);
-		desc->chip_data = &cfg[i];
-		alloc_bootmem_cpumask_var(&cfg[i].domain);
-		alloc_bootmem_cpumask_var(&cfg[i].old_domain);
-		if (i < NR_IRQS_LEGACY)
-			cpumask_setall(cfg[i].domain);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_SPARSE_IRQ
-static struct irq_cfg *irq_cfg(unsigned int irq)
-{
-	struct irq_cfg *cfg = NULL;
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	if (desc)
-		cfg = desc->chip_data;
-
-	return cfg;
-}
-
-static struct irq_cfg *get_one_free_irq_cfg(int cpu)
-{
-	struct irq_cfg *cfg;
-	int node;
-
-	node = cpu_to_node(cpu);
-
-	cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
-	if (cfg) {
-		if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
-			kfree(cfg);
-			cfg = NULL;
-		} else if (!alloc_cpumask_var_node(&cfg->old_domain,
-							  GFP_ATOMIC, node)) {
-			free_cpumask_var(cfg->domain);
-			kfree(cfg);
-			cfg = NULL;
-		} else {
-			cpumask_clear(cfg->domain);
-			cpumask_clear(cfg->old_domain);
-		}
-	}
-
-	return cfg;
-}
-
-int arch_init_chip_data(struct irq_desc *desc, int cpu)
-{
-	struct irq_cfg *cfg;
-
-	cfg = desc->chip_data;
-	if (!cfg) {
-		desc->chip_data = get_one_free_irq_cfg(cpu);
-		if (!desc->chip_data) {
-			printk(KERN_ERR "can not alloc irq_cfg\n");
-			BUG_ON(1);
-		}
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-
-static void
-init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
-{
-	struct irq_pin_list *old_entry, *head, *tail, *entry;
-
-	cfg->irq_2_pin = NULL;
-	old_entry = old_cfg->irq_2_pin;
-	if (!old_entry)
-		return;
-
-	entry = get_one_free_irq_2_pin(cpu);
-	if (!entry)
-		return;
-
-	entry->apic	= old_entry->apic;
-	entry->pin	= old_entry->pin;
-	head		= entry;
-	tail		= entry;
-	old_entry	= old_entry->next;
-	while (old_entry) {
-		entry = get_one_free_irq_2_pin(cpu);
-		if (!entry) {
-			entry = head;
-			while (entry) {
-				head = entry->next;
-				kfree(entry);
-				entry = head;
-			}
-			/* still use the old one */
-			return;
-		}
-		entry->apic	= old_entry->apic;
-		entry->pin	= old_entry->pin;
-		tail->next	= entry;
-		tail		= entry;
-		old_entry	= old_entry->next;
-	}
-
-	tail->next = NULL;
-	cfg->irq_2_pin = head;
-}
-
-static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg)
-{
-	struct irq_pin_list *entry, *next;
-
-	if (old_cfg->irq_2_pin == cfg->irq_2_pin)
-		return;
-
-	entry = old_cfg->irq_2_pin;
-
-	while (entry) {
-		next = entry->next;
-		kfree(entry);
-		entry = next;
-	}
-	old_cfg->irq_2_pin = NULL;
-}
-
-void arch_init_copy_chip_data(struct irq_desc *old_desc,
-				 struct irq_desc *desc, int cpu)
-{
-	struct irq_cfg *cfg;
-	struct irq_cfg *old_cfg;
-
-	cfg = get_one_free_irq_cfg(cpu);
-
-	if (!cfg)
-		return;
-
-	desc->chip_data = cfg;
-
-	old_cfg = old_desc->chip_data;
-
-	memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
-
-	init_copy_irq_2_pin(old_cfg, cfg, cpu);
-}
-
-static void free_irq_cfg(struct irq_cfg *old_cfg)
-{
-	kfree(old_cfg);
-}
-
-void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
-{
-	struct irq_cfg *old_cfg, *cfg;
-
-	old_cfg = old_desc->chip_data;
-	cfg = desc->chip_data;
-
-	if (old_cfg == cfg)
-		return;
-
-	if (old_cfg) {
-		free_irq_2_pin(old_cfg, cfg);
-		free_irq_cfg(old_cfg);
-		old_desc->chip_data = NULL;
-	}
-}
-
-static void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg = desc->chip_data;
-
-	if (!cfg->move_in_progress) {
-		/* it means that domain is not changed */
-		if (!cpumask_intersects(desc->affinity, mask))
-			cfg->move_desc_pending = 1;
-	}
-}
-#endif
-
-#else
-static struct irq_cfg *irq_cfg(unsigned int irq)
-{
-	return irq < nr_irqs ? irq_cfgx + irq : NULL;
-}
-
-#endif
-
-#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
-static inline void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-}
-#endif
-
-struct io_apic {
-	unsigned int index;
-	unsigned int unused[3];
-	unsigned int data;
-};
-
-static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
-{
-	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].apicaddr & ~PAGE_MASK);
-}
-
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	return readl(&io_apic->data);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- *
- * Older SiS APIC requires we rewrite the index register
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-
-	if (sis_apic_bug)
-		writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
-{
-	struct irq_pin_list *entry;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	entry = cfg->irq_2_pin;
-	for (;;) {
-		unsigned int reg;
-		int pin;
-
-		if (!entry)
-			break;
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		/* Is the remote IRR bit set? */
-		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
-			spin_unlock_irqrestore(&ioapic_lock, flags);
-			return true;
-		}
-		if (!entry->next)
-			break;
-		entry = entry->next;
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return false;
-}
-
-union entry_union {
-	struct { u32 w1, w2; };
-	struct IO_APIC_route_entry entry;
-};
-
-static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
-{
-	union entry_union eu;
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
-	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return eu.entry;
-}
-
-/*
- * When we write a new IO APIC routing entry, we need to write the high
- * word first! If the mask bit in the low word is clear, we will enable
- * the interrupt, and we need to make sure the entry is fully populated
- * before that happens.
- */
-static void
-__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	union entry_union eu;
-	eu.entry = e;
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-}
-
-void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__ioapic_write_entry(apic, pin, e);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * When we mask an IO APIC routing entry, we need to write the low
- * word first, in order to set the mask bit before we change the
- * high bits!
- */
-static void ioapic_mask_entry(int apic, int pin)
-{
-	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
-{
-	cpumask_var_t cleanup_mask;
-
-	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
-		unsigned int i;
-		cfg->move_cleanup_count = 0;
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			cfg->move_cleanup_count++;
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
-	} else {
-		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
-		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
-		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		free_cpumask_var(cleanup_mask);
-	}
-	cfg->move_in_progress = 0;
-}
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
-	int apic, pin;
-	struct irq_pin_list *entry;
-	u8 vector = cfg->vector;
-
-	entry = cfg->irq_2_pin;
-	for (;;) {
-		unsigned int reg;
-
-		if (!entry)
-			break;
-
-		apic = entry->apic;
-		pin = entry->pin;
-#ifdef CONFIG_INTR_REMAP
-		/*
-		 * With interrupt-remapping, destination information comes
-		 * from interrupt-remapping table entry.
-		 */
-		if (!irq_remapped(irq))
-			io_apic_write(apic, 0x11 + pin*2, dest);
-#else
-		io_apic_write(apic, 0x11 + pin*2, dest);
-#endif
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
-		reg |= vector;
-		io_apic_modify(apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = entry->next;
-	}
-}
-
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
-/*
- * Either sets desc->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
- * leaves desc->affinity untouched.
- */
-static unsigned int
-set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg;
-	unsigned int irq;
-
-	if (!cpumask_intersects(mask, cpu_online_mask))
-		return BAD_APICID;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-	if (assign_irq_vector(irq, cfg, mask))
-		return BAD_APICID;
-
-	cpumask_and(desc->affinity, cfg->domain, mask);
-	set_extra_move_desc(desc, mask);
-
-	return apic->cpu_mask_to_apicid_and(desc->affinity, cpu_online_mask);
-}
-
-static void
-set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	unsigned int dest;
-	unsigned int irq;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	dest = set_desc_affinity(desc, mask);
-	if (dest != BAD_APICID) {
-		/* Only the high 8 bits are valid. */
-		dest = SET_APIC_LOGICAL_ID(dest);
-		__target_IO_APIC_irq(irq, dest, cfg);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void
-set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-
-	set_ioapic_affinity_irq_desc(desc, mask);
-}
-#endif /* CONFIG_SMP */
-
-/*
- * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
- * shared ISA-space IRQs, so we have to support them. We are super
- * fast in the common case, and fast for shared ISA-space IRQs.
- */
-static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
-{
-	struct irq_pin_list *entry;
-
-	entry = cfg->irq_2_pin;
-	if (!entry) {
-		entry = get_one_free_irq_2_pin(cpu);
-		if (!entry) {
-			printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
-					apic, pin);
-			return;
-		}
-		cfg->irq_2_pin = entry;
-		entry->apic = apic;
-		entry->pin = pin;
-		return;
-	}
-
-	while (entry->next) {
-		/* not again, please */
-		if (entry->apic == apic && entry->pin == pin)
-			return;
-
-		entry = entry->next;
-	}
-
-	entry->next = get_one_free_irq_2_pin(cpu);
-	entry = entry->next;
-	entry->apic = apic;
-	entry->pin = pin;
-}
-
-/*
- * Reroute an IRQ to a different pin.
- */
-static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
-				      int oldapic, int oldpin,
-				      int newapic, int newpin)
-{
-	struct irq_pin_list *entry = cfg->irq_2_pin;
-	int replaced = 0;
-
-	while (entry) {
-		if (entry->apic == oldapic && entry->pin == oldpin) {
-			entry->apic = newapic;
-			entry->pin = newpin;
-			replaced = 1;
-			/* every one is different, right? */
-			break;
-		}
-		entry = entry->next;
-	}
-
-	/* why? call replace before add? */
-	if (!replaced)
-		add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
-}
-
-static inline void io_apic_modify_irq(struct irq_cfg *cfg,
-				int mask_and, int mask_or,
-				void (*final)(struct irq_pin_list *entry))
-{
-	int pin;
-	struct irq_pin_list *entry;
-
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
-		unsigned int reg;
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
-		reg &= mask_and;
-		reg |= mask_or;
-		io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
-		if (final)
-			final(entry);
-	}
-}
-
-static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
-}
-
-#ifdef CONFIG_X86_64
-static void io_apic_sync(struct irq_pin_list *entry)
-{
-	/*
-	 * Synchronize the IO-APIC and the CPU by doing
-	 * a dummy read from the IO-APIC
-	 */
-	struct io_apic __iomem *io_apic;
-	io_apic = io_apic_base(entry->apic);
-	readl(&io_apic->data);
-}
-
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
-}
-#else /* CONFIG_X86_32 */
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
-}
-
-static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
-			IO_APIC_REDIR_MASKED, NULL);
-}
-
-static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
-			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
-}
-#endif /* CONFIG_X86_32 */
-
-static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
-{
-	struct irq_cfg *cfg = desc->chip_data;
-	unsigned long flags;
-
-	BUG_ON(!cfg);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__mask_IO_APIC_irq(cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void unmask_IO_APIC_irq_desc(struct irq_desc *desc)
-{
-	struct irq_cfg *cfg = desc->chip_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_IO_APIC_irq(cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void mask_IO_APIC_irq(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	mask_IO_APIC_irq_desc(desc);
-}
-static void unmask_IO_APIC_irq(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	unmask_IO_APIC_irq_desc(desc);
-}
-
-static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
-{
-	struct IO_APIC_route_entry entry;
-
-	/* Check delivery_mode to be sure we're not clearing an SMI pin */
-	entry = ioapic_read_entry(apic, pin);
-	if (entry.delivery_mode == dest_SMI)
-		return;
-	/*
-	 * Disable it in the IO-APIC irq-routing table:
-	 */
-	ioapic_mask_entry(apic, pin);
-}
-
-static void clear_IO_APIC (void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			clear_IO_APIC_pin(apic, pin);
-}
-
-#ifdef CONFIG_X86_32
-/*
- * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
- * specific CPU-side IRQs.
- */
-
-#define MAX_PIRQS 8
-static int pirq_entries[MAX_PIRQS] = {
-	[0 ... MAX_PIRQS - 1] = -1
-};
-
-static int __init ioapic_pirq_setup(char *str)
-{
-	int i, max;
-	int ints[MAX_PIRQS+1];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"PIRQ redirection, working around broken MP-BIOS.\n");
-	max = MAX_PIRQS;
-	if (ints[0] < MAX_PIRQS)
-		max = ints[0];
-
-	for (i = 0; i < max; i++) {
-		apic_printk(APIC_VERBOSE, KERN_DEBUG
-				"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
-		/*
-		 * PIRQs are mapped upside down, usually.
-		 */
-		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
-	}
-	return 1;
-}
-
-__setup("pirq=", ioapic_pirq_setup);
-#endif /* CONFIG_X86_32 */
-
-#ifdef CONFIG_INTR_REMAP
-/* I/O APIC RTE contents at the OS boot up */
-static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
-
-/*
- * Saves and masks all the unmasked IO-APIC RTE's
- */
-int save_mask_IO_APIC_setup(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	unsigned long flags;
-	int apic, pin;
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		early_ioapic_entries[apic] =
-			kzalloc(sizeof(struct IO_APIC_route_entry) *
-				nr_ioapic_registers[apic], GFP_KERNEL);
-		if (!early_ioapic_entries[apic])
-			goto nomem;
-	}
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-
-			entry = early_ioapic_entries[apic][pin] =
-				ioapic_read_entry(apic, pin);
-			if (!entry.mask) {
-				entry.mask = 1;
-				ioapic_write_entry(apic, pin, entry);
-			}
-		}
-
-	return 0;
-
-nomem:
-	while (apic >= 0)
-		kfree(early_ioapic_entries[apic--]);
-	memset(early_ioapic_entries, 0,
-		ARRAY_SIZE(early_ioapic_entries));
-
-	return -ENOMEM;
-}
-
-void restore_IO_APIC_setup(void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		if (!early_ioapic_entries[apic])
-			break;
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			ioapic_write_entry(apic, pin,
-					   early_ioapic_entries[apic][pin]);
-		kfree(early_ioapic_entries[apic]);
-		early_ioapic_entries[apic] = NULL;
-	}
-}
-
-void reinit_intr_remapped_IO_APIC(int intr_remapping)
-{
-	/*
-	 * for now plain restore of previous settings.
-	 * TBD: In the case of OS enabling interrupt-remapping,
-	 * IO-APIC RTE's need to be setup to point to interrupt-remapping
-	 * table entries. for now, do a plain restore, and wait for
-	 * the setup_IO_APIC_irqs() to do proper initialization.
-	 */
-	restore_IO_APIC_setup();
-}
-#endif
-
-/*
- * Find the IRQ entry number of a certain pin.
- */
-static int find_irq_entry(int apic, int pin, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].irqtype == type &&
-		    (mp_irqs[i].dstapic == mp_ioapics[apic].apicid ||
-		     mp_irqs[i].dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].dstirq == pin)
-			return i;
-
-	return -1;
-}
-
-/*
- * Find the pin to which IRQ[irq] (ISA) is connected
- */
-static int __init find_isa_irq_pin(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].irqtype == type) &&
-		    (mp_irqs[i].srcbusirq == irq))
-
-			return mp_irqs[i].dstirq;
-	}
-	return -1;
-}
-
-static int __init find_isa_irq_apic(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].irqtype == type) &&
-		    (mp_irqs[i].srcbusirq == irq))
-			break;
-	}
-	if (i < mp_irq_entries) {
-		int apic;
-		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic)
-				return apic;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
-	int apic, i, best_guess = -1;
-
-	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
-		bus, slot, pin);
-	if (test_bit(bus, mp_bus_not_pci)) {
-		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
-		return -1;
-	}
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].srcbus;
-
-		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
-			    mp_irqs[i].dstapic == MP_APIC_ALL)
-				break;
-
-		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].irqtype &&
-		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
-			if (!(apic || IO_APIC_IRQ(irq)))
-				continue;
-
-			if (pin == (mp_irqs[i].srcbusirq & 3))
-				return irq;
-			/*
-			 * Use the first all-but-pin matching entry as a
-			 * best-guess fuzzy result for broken mptables.
-			 */
-			if (best_guess < 0)
-				best_guess = irq;
-		}
-	}
-	return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-/*
- * EISA Edge/Level control register, ELCR
- */
-static int EISA_ELCR(unsigned int irq)
-{
-	if (irq < NR_IRQS_LEGACY) {
-		unsigned int port = 0x4d0 + (irq >> 3);
-		return (inb(port) >> (irq & 7)) & 1;
-	}
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"Broken MPtable reports ISA irq %d\n", irq);
-	return 0;
-}
-
-#endif
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
-
-/* EISA interrupts are always polarity zero and can be edge or level
- * trigger depending on the ELCR value.  If an interrupt is listed as
- * EISA conforming in the MP table, that means its trigger type must
- * be read in from the ELCR */
-
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
-#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
-
-/* PCI interrupts are always polarity one level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
-
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx)	(1)
-#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
-
-static int MPBIOS_polarity(int idx)
-{
-	int bus = mp_irqs[idx].srcbus;
-	int polarity;
-
-	/*
-	 * Determine IRQ line polarity (high active or low active):
-	 */
-	switch (mp_irqs[idx].irqflag & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-			if (test_bit(bus, mp_bus_not_pci))
-				polarity = default_ISA_polarity(idx);
-			else
-				polarity = default_PCI_polarity(idx);
-			break;
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-	}
-	return polarity;
-}
-
-static int MPBIOS_trigger(int idx)
-{
-	int bus = mp_irqs[idx].srcbus;
-	int trigger;
-
-	/*
-	 * Determine IRQ trigger mode (edge or level sensitive):
-	 */
-	switch ((mp_irqs[idx].irqflag>>2) & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent */
-			if (test_bit(bus, mp_bus_not_pci))
-				trigger = default_ISA_trigger(idx);
-			else
-				trigger = default_PCI_trigger(idx);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-			switch (mp_bus_id_to_type[bus]) {
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					trigger = default_EISA_trigger(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					trigger = default_MCA_trigger(idx);
-					break;
-				}
-				default:
-				{
-					printk(KERN_WARNING "broken BIOS!!\n");
-					trigger = 1;
-					break;
-				}
-			}
-#endif
-			break;
-		case 1: /* edge */
-		{
-			trigger = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-		case 3: /* level */
-		{
-			trigger = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 0;
-			break;
-		}
-	}
-	return trigger;
-}
-
-static inline int irq_polarity(int idx)
-{
-	return MPBIOS_polarity(idx);
-}
-
-static inline int irq_trigger(int idx)
-{
-	return MPBIOS_trigger(idx);
-}
-
-int (*ioapic_renumber_irq)(int ioapic, int irq);
-static int pin_2_irq(int idx, int apic, int pin)
-{
-	int irq, i;
-	int bus = mp_irqs[idx].srcbus;
-
-	/*
-	 * Debugging check, we are in big trouble if this message pops up!
-	 */
-	if (mp_irqs[idx].dstirq != pin)
-		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
-
-	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].srcbusirq;
-	} else {
-		/*
-		 * PCI IRQs are mapped in order
-		 */
-		i = irq = 0;
-		while (i < apic)
-			irq += nr_ioapic_registers[i++];
-		irq += pin;
-		/*
-                 * For MPS mode, so far only needed by ES7000 platform
-                 */
-		if (ioapic_renumber_irq)
-			irq = ioapic_renumber_irq(apic, irq);
-	}
-
-#ifdef CONFIG_X86_32
-	/*
-	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
-	 */
-	if ((pin >= 16) && (pin <= 23)) {
-		if (pirq_entries[pin-16] != -1) {
-			if (!pirq_entries[pin-16]) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						"disabling PIRQ%d\n", pin-16);
-			} else {
-				irq = pirq_entries[pin-16];
-				apic_printk(APIC_VERBOSE, KERN_DEBUG
-						"using PIRQ%d -> IRQ %d\n",
-						pin-16, irq);
-			}
-		}
-	}
-#endif
-
-	return irq;
-}
-
-void lock_vector_lock(void)
-{
-	/* Used to the online set of cpus does not change
-	 * during assign_irq_vector.
-	 */
-	spin_lock(&vector_lock);
-}
-
-void unlock_vector_lock(void)
-{
-	spin_unlock(&vector_lock);
-}
-
-static int
-__assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
-{
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
-	unsigned int old_vector;
-	int cpu, err;
-	cpumask_var_t tmp_mask;
-
-	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
-		return -EBUSY;
-
-	if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
-		return -ENOMEM;
-
-	old_vector = cfg->vector;
-	if (old_vector) {
-		cpumask_and(tmp_mask, mask, cpu_online_mask);
-		cpumask_and(tmp_mask, cfg->domain, tmp_mask);
-		if (!cpumask_empty(tmp_mask)) {
-			free_cpumask_var(tmp_mask);
-			return 0;
-		}
-	}
-
-	/* Only try and allocate irqs on cpus that are present */
-	err = -ENOSPC;
-	for_each_cpu_and(cpu, mask, cpu_online_mask) {
-		int new_cpu;
-		int vector, offset;
-
-		apic->vector_allocation_domain(cpu, tmp_mask);
-
-		vector = current_vector;
-		offset = current_offset;
-next:
-		vector += 8;
-		if (vector >= first_system_vector) {
-			/* If out of vectors on large boxen, must share them. */
-			offset = (offset + 1) % 8;
-			vector = FIRST_DEVICE_VECTOR + offset;
-		}
-		if (unlikely(current_vector == vector))
-			continue;
-
-		if (test_bit(vector, used_vectors))
-			goto next;
-
-		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
-			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
-				goto next;
-		/* Found one! */
-		current_vector = vector;
-		current_offset = offset;
-		if (old_vector) {
-			cfg->move_in_progress = 1;
-			cpumask_copy(cfg->old_domain, cfg->domain);
-		}
-		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
-			per_cpu(vector_irq, new_cpu)[vector] = irq;
-		cfg->vector = vector;
-		cpumask_copy(cfg->domain, tmp_mask);
-		err = 0;
-		break;
-	}
-	free_cpumask_var(tmp_mask);
-	return err;
-}
-
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
-{
-	int err;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	err = __assign_irq_vector(irq, cfg, mask);
-	spin_unlock_irqrestore(&vector_lock, flags);
-	return err;
-}
-
-static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
-{
-	int cpu, vector;
-
-	BUG_ON(!cfg->vector);
-
-	vector = cfg->vector;
-	for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
-		per_cpu(vector_irq, cpu)[vector] = -1;
-
-	cfg->vector = 0;
-	cpumask_clear(cfg->domain);
-
-	if (likely(!cfg->move_in_progress))
-		return;
-	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
-		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
-								vector++) {
-			if (per_cpu(vector_irq, cpu)[vector] != irq)
-				continue;
-			per_cpu(vector_irq, cpu)[vector] = -1;
-			break;
-		}
-	}
-	cfg->move_in_progress = 0;
-}
-
-void __setup_vector_irq(int cpu)
-{
-	/* Initialize vector_irq on a new cpu */
-	/* This function must be called with vector_lock held */
-	int irq, vector;
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
-
-	/* Mark the inuse vectors */
-	for_each_irq_desc(irq, desc) {
-		cfg = desc->chip_data;
-		if (!cpumask_test_cpu(cpu, cfg->domain))
-			continue;
-		vector = cfg->vector;
-		per_cpu(vector_irq, cpu)[vector] = irq;
-	}
-	/* Mark the free vectors */
-	for (vector = 0; vector < NR_VECTORS; ++vector) {
-		irq = per_cpu(vector_irq, cpu)[vector];
-		if (irq < 0)
-			continue;
-
-		cfg = irq_cfg(irq);
-		if (!cpumask_test_cpu(cpu, cfg->domain))
-			per_cpu(vector_irq, cpu)[vector] = -1;
-	}
-}
-
-static struct irq_chip ioapic_chip;
-#ifdef CONFIG_INTR_REMAP
-static struct irq_chip ir_ioapic_chip;
-#endif
-
-#define IOAPIC_AUTO     -1
-#define IOAPIC_EDGE     0
-#define IOAPIC_LEVEL    1
-
-#ifdef CONFIG_X86_32
-static inline int IO_APIC_irq_trigger(int irq)
-{
-	int apic, idx, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			idx = find_irq_entry(apic, pin, mp_INT);
-			if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
-				return irq_trigger(idx);
-		}
-	}
-	/*
-         * nonexistent IRQs are edge default
-         */
-	return 0;
-}
-#else
-static inline int IO_APIC_irq_trigger(int irq)
-{
-	return 1;
-}
-#endif
-
-static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long trigger)
-{
-
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL)
-		desc->status |= IRQ_LEVEL;
-	else
-		desc->status &= ~IRQ_LEVEL;
-
-#ifdef CONFIG_INTR_REMAP
-	if (irq_remapped(irq)) {
-		desc->status |= IRQ_MOVE_PCNTXT;
-		if (trigger)
-			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
-						      handle_fasteoi_irq,
-						     "fasteoi");
-		else
-			set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
-						      handle_edge_irq, "edge");
-		return;
-	}
-#endif
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL)
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_fasteoi_irq,
-					      "fasteoi");
-	else
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_edge_irq, "edge");
-}
-
-int setup_ioapic_entry(int apic_id, int irq,
-		       struct IO_APIC_route_entry *entry,
-		       unsigned int destination, int trigger,
-		       int polarity, int vector)
-{
-	/*
-	 * add it to the IO-APIC irq-routing table:
-	 */
-	memset(entry,0,sizeof(*entry));
-
-#ifdef CONFIG_INTR_REMAP
-	if (intr_remapping_enabled) {
-		struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
-		struct irte irte;
-		struct IR_IO_APIC_route_entry *ir_entry =
-			(struct IR_IO_APIC_route_entry *) entry;
-		int index;
-
-		if (!iommu)
-			panic("No mapping iommu for ioapic %d\n", apic_id);
-
-		index = alloc_irte(iommu, irq, 1);
-		if (index < 0)
-			panic("Failed to allocate IRTE for ioapic %d\n", apic_id);
-
-		memset(&irte, 0, sizeof(irte));
-
-		irte.present = 1;
-		irte.dst_mode = apic->irq_dest_mode;
-		irte.trigger_mode = trigger;
-		irte.dlvry_mode = apic->irq_delivery_mode;
-		irte.vector = vector;
-		irte.dest_id = IRTE_DEST(destination);
-
-		modify_irte(irq, &irte);
-
-		ir_entry->index2 = (index >> 15) & 0x1;
-		ir_entry->zero = 0;
-		ir_entry->format = 1;
-		ir_entry->index = (index & 0x7fff);
-	} else
-#endif
-	{
-		entry->delivery_mode = apic->irq_delivery_mode;
-		entry->dest_mode = apic->irq_dest_mode;
-		entry->dest = destination;
-	}
-
-	entry->mask = 0;				/* enable IRQ */
-	entry->trigger = trigger;
-	entry->polarity = polarity;
-	entry->vector = vector;
-
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (trigger)
-		entry->mask = 1;
-	return 0;
-}
-
-static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq_desc *desc,
-			      int trigger, int polarity)
-{
-	struct irq_cfg *cfg;
-	struct IO_APIC_route_entry entry;
-	unsigned int dest;
-
-	if (!IO_APIC_IRQ(irq))
-		return;
-
-	cfg = desc->chip_data;
-
-	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
-		return;
-
-	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG
-		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
-		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic_id, mp_ioapics[apic_id].apicid, pin, cfg->vector,
-		    irq, trigger, polarity);
-
-
-	if (setup_ioapic_entry(mp_ioapics[apic_id].apicid, irq, &entry,
-			       dest, trigger, polarity, cfg->vector)) {
-		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
-		       mp_ioapics[apic_id].apicid, pin);
-		__clear_irq_vector(irq, cfg);
-		return;
-	}
-
-	ioapic_register_intr(irq, desc, trigger);
-	if (irq < NR_IRQS_LEGACY)
-		disable_8259A_irq(irq);
-
-	ioapic_write_entry(apic_id, pin, entry);
-}
-
-static void __init setup_IO_APIC_irqs(void)
-{
-	int apic_id, pin, idx, irq;
-	int notcon = 0;
-	struct irq_desc *desc;
-	struct irq_cfg *cfg;
-	int cpu = boot_cpu_id;
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
-
-	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
-		for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
-
-			idx = find_irq_entry(apic_id, pin, mp_INT);
-			if (idx == -1) {
-				if (!notcon) {
-					notcon = 1;
-					apic_printk(APIC_VERBOSE,
-						KERN_DEBUG " %d-%d",
-						mp_ioapics[apic_id].apicid, pin);
-				} else
-					apic_printk(APIC_VERBOSE, " %d-%d",
-						mp_ioapics[apic_id].apicid, pin);
-				continue;
-			}
-			if (notcon) {
-				apic_printk(APIC_VERBOSE,
-					" (apicid-pin) not connected\n");
-				notcon = 0;
-			}
-
-			irq = pin_2_irq(idx, apic_id, pin);
-
-			/*
-			 * Skip the timer IRQ if there's a quirk handler
-			 * installed and if it returns 1:
-			 */
-			if (apic->multi_timer_check &&
-					apic->multi_timer_check(apic_id, irq))
-				continue;
-
-			desc = irq_to_desc_alloc_cpu(irq, cpu);
-			if (!desc) {
-				printk(KERN_INFO "can not get irq_desc for %d\n", irq);
-				continue;
-			}
-			cfg = desc->chip_data;
-			add_pin_to_irq_cpu(cfg, cpu, apic_id, pin);
-
-			setup_IO_APIC_irq(apic_id, pin, irq, desc,
-					irq_trigger(idx), irq_polarity(idx));
-		}
-	}
-
-	if (notcon)
-		apic_printk(APIC_VERBOSE,
-			" (apicid-pin) not connected\n");
-}
-
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
-					int vector)
-{
-	struct IO_APIC_route_entry entry;
-
-#ifdef CONFIG_INTR_REMAP
-	if (intr_remapping_enabled)
-		return;
-#endif
-
-	memset(&entry, 0, sizeof(entry));
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	entry.dest_mode = apic->irq_dest_mode;
-	entry.mask = 0;			/* don't mask IRQ for edge */
-	entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus());
-	entry.delivery_mode = apic->irq_delivery_mode;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we may have a 8259A-master in AEOI mode ...
-	 */
-	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	ioapic_write_entry(apic_id, pin, entry);
-}
-
-
-__apicdebuginit(void) print_IO_APIC(void)
-{
-	int apic, i;
-	union IO_APIC_reg_00 reg_00;
-	union IO_APIC_reg_01 reg_01;
-	union IO_APIC_reg_02 reg_02;
-	union IO_APIC_reg_03 reg_03;
-	unsigned long flags;
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
-	unsigned int irq;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
-	for (i = 0; i < nr_ioapics; i++)
-		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].apicid, nr_ioapic_registers[i]);
-
-	/*
-	 * We are a bit conservative about what we expect.  We have to
-	 * know about every hardware change ASAP.
-	 */
-	printk(KERN_INFO "testing the IO APIC.......................\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(apic, 0);
-	reg_01.raw = io_apic_read(apic, 1);
-	if (reg_01.bits.version >= 0x10)
-		reg_02.raw = io_apic_read(apic, 2);
-	if (reg_01.bits.version >= 0x20)
-		reg_03.raw = io_apic_read(apic, 3);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].apicid);
-	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
-	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
-	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
-	printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
-
-	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
-	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
-
-	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
-	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
-
-	/*
-	 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
-	 * but the value of reg_02 is read as the previous read register
-	 * value, so ignore it if reg_02 == reg_01.
-	 */
-	if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
-		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
-		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
-	}
-
-	/*
-	 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
-	 * or reg_03, but the value of reg_0[23] is read as the previous read
-	 * register value, so ignore it if reg_03 == reg_0[12].
-	 */
-	if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
-	    reg_03.raw != reg_01.raw) {
-		printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
-		printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
-	}
-
-	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
-			  " Stat Dmod Deli Vect:   \n");
-
-	for (i = 0; i <= reg_01.bits.entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		printk(KERN_DEBUG " %02x %03X ",
-			i,
-			entry.dest
-		);
-
-		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector
-		);
-	}
-	}
-	printk(KERN_DEBUG "IRQ to pin mappings:\n");
-	for_each_irq_desc(irq, desc) {
-		struct irq_pin_list *entry;
-
-		cfg = desc->chip_data;
-		entry = cfg->irq_2_pin;
-		if (!entry)
-			continue;
-		printk(KERN_DEBUG "IRQ%d ", irq);
-		for (;;) {
-			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = entry->next;
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO ".................................... done.\n");
-
-	return;
-}
-
-__apicdebuginit(void) print_APIC_bitfield(int base)
-{
-	unsigned int v;
-	int i, j;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
-}
-
-__apicdebuginit(void) print_local_APIC(void *dummy)
-{
-	unsigned int v, ver, maxlvt;
-	u64 icr;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
-		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
-	v = apic_read(APIC_LVR);
-	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
-	ver = GET_APIC_VERSION(v);
-	maxlvt = lapic_get_maxlvt();
-
-	v = apic_read(APIC_TASKPRI);
-	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
-
-	if (APIC_INTEGRATED(ver)) {                     /* !82489DX */
-		if (!APIC_XAPIC(ver)) {
-			v = apic_read(APIC_ARBPRI);
-			printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
-			       v & APIC_ARBPRI_MASK);
-		}
-		v = apic_read(APIC_PROCPRI);
-		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
-	}
-
-	/*
-	 * Remote read supported only in the 82489DX and local APIC for
-	 * Pentium processors.
-	 */
-	if (!APIC_INTEGRATED(ver) || maxlvt == 3) {
-		v = apic_read(APIC_RRR);
-		printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_LDR);
-	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
-	if (!x2apic_enabled()) {
-		v = apic_read(APIC_DFR);
-		printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
-	}
-	v = apic_read(APIC_SPIV);
-	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
-
-	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
-	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
-	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
-
-	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
-		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
-			apic_write(APIC_ESR, 0);
-
-		v = apic_read(APIC_ESR);
-		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
-	}
-
-	icr = apic_icr_read();
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
-
-	v = apic_read(APIC_LVTT);
-	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
-
-	if (maxlvt > 3) {                       /* PC is LVT#4. */
-		v = apic_read(APIC_LVTPC);
-		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
-	}
-	v = apic_read(APIC_LVT0);
-	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
-	v = apic_read(APIC_LVT1);
-	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
-
-	if (maxlvt > 2) {			/* ERR is LVT#3. */
-		v = apic_read(APIC_LVTERR);
-		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_TMICT);
-	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
-	v = apic_read(APIC_TMCCT);
-	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
-	v = apic_read(APIC_TDCR);
-	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
-	printk("\n");
-}
-
-__apicdebuginit(void) print_all_local_APICs(void)
-{
-	int cpu;
-
-	preempt_disable();
-	for_each_online_cpu(cpu)
-		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
-	preempt_enable();
-}
-
-__apicdebuginit(void) print_PIC(void)
-{
-	unsigned int v;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "\nprinting PIC contents\n");
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	v = inb(0xa1) << 8 | inb(0x21);
-	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
-
-	v = inb(0xa0) << 8 | inb(0x20);
-	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
-
-	outb(0x0b,0xa0);
-	outb(0x0b,0x20);
-	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a,0xa0);
-	outb(0x0a,0x20);
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
-
-	v = inb(0x4d1) << 8 | inb(0x4d0);
-	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
-}
-
-__apicdebuginit(int) print_all_ICs(void)
-{
-	print_PIC();
-	print_all_local_APICs();
-	print_IO_APIC();
-
-	return 0;
-}
-
-fs_initcall(print_all_ICs);
-
-
-/* Where if anywhere is the i8259 connect in external int mode */
-static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
-
-void __init enable_IO_APIC(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	int i8259_apic, i8259_pin;
-	int apic;
-	unsigned long flags;
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-	for(apic = 0; apic < nr_ioapics; apic++) {
-		int pin;
-		/* See if any of the pins is in ExtINT mode */
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-			entry = ioapic_read_entry(apic, pin);
-
-			/* If the interrupt line is enabled and in ExtInt mode
-			 * I have found the pin where the i8259 is connected.
-			 */
-			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
-				ioapic_i8259.apic = apic;
-				ioapic_i8259.pin  = pin;
-				goto found_i8259;
-			}
-		}
-	}
- found_i8259:
-	/* Look to see what if the MP table has reported the ExtINT */
-	/* If we could not find the appropriate pin by looking at the ioapic
-	 * the i8259 probably is not connected the ioapic but give the
-	 * mptable a chance anyway.
-	 */
-	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
-	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
-	/* Trust the MP table if nothing is setup in the hardware */
-	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
-		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
-		ioapic_i8259.pin  = i8259_pin;
-		ioapic_i8259.apic = i8259_apic;
-	}
-	/* Complain if the MP table and the hardware disagree */
-	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
-		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
-	{
-		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
-	}
-
-	/*
-	 * Do not trust the IO-APIC being empty at bootup
-	 */
-	clear_IO_APIC();
-}
-
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
-{
-	/*
-	 * Clear the IO-APIC before rebooting:
-	 */
-	clear_IO_APIC();
-
-	/*
-	 * If the i8259 is routed through an IOAPIC
-	 * Put that IOAPIC in virtual wire mode
-	 * so legacy interrupts can be delivered.
-	 */
-	if (ioapic_i8259.pin != -1) {
-		struct IO_APIC_route_entry entry;
-
-		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest            = read_apic_id();
-
-		/*
-		 * Add it to the IO-APIC irq-routing table:
-		 */
-		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
-	}
-
-	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-}
-
-#ifdef CONFIG_X86_32
-/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
- */
-
-static void __init setup_ioapic_ids_from_mpc(void)
-{
-	union IO_APIC_reg_00 reg_00;
-	physid_mask_t phys_id_present_map;
-	int apic_id;
-	int i;
-	unsigned char old_id;
-	unsigned long flags;
-
-	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
-		return;
-
-	/*
-	 * Don't check I/O APIC IDs for xAPIC systems.  They have
-	 * no meaning without the serial APIC bus.
-	 */
-	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return;
-	/*
-	 * This is broken; anything with a real cpu count has to
-	 * circumvent this idiocy regardless.
-	 */
-	phys_id_present_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
-
-	/*
-	 * Set the IOAPIC ID to the value stored in the MPC table.
-	 */
-	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
-
-		/* Read the register 0 value */
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic_id, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		old_id = mp_ioapics[apic_id].apicid;
-
-		if (mp_ioapics[apic_id].apicid >= get_physical_broadcast()) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				apic_id, mp_ioapics[apic_id].apicid);
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				reg_00.bits.ID);
-			mp_ioapics[apic_id].apicid = reg_00.bits.ID;
-		}
-
-		/*
-		 * Sanity check, is the ID really free? Every APIC in a
-		 * system must have a unique ID or we get lots of nice
-		 * 'stuck on smp_invalidate_needed IPI wait' messages.
-		 */
-		if (apic->check_apicid_used(phys_id_present_map,
-					mp_ioapics[apic_id].apicid)) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				apic_id, mp_ioapics[apic_id].apicid);
-			for (i = 0; i < get_physical_broadcast(); i++)
-				if (!physid_isset(i, phys_id_present_map))
-					break;
-			if (i >= get_physical_broadcast())
-				panic("Max APIC ID exceeded!\n");
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				i);
-			physid_set(i, phys_id_present_map);
-			mp_ioapics[apic_id].apicid = i;
-		} else {
-			physid_mask_t tmp;
-			tmp = apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
-			apic_printk(APIC_VERBOSE, "Setting %d in the "
-					"phys_id_present_map\n",
-					mp_ioapics[apic_id].apicid);
-			physids_or(phys_id_present_map, phys_id_present_map, tmp);
-		}
-
-
-		/*
-		 * We need to adjust the IRQ routing table
-		 * if the ID changed.
-		 */
-		if (old_id != mp_ioapics[apic_id].apicid)
-			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].dstapic == old_id)
-					mp_irqs[i].dstapic
-						= mp_ioapics[apic_id].apicid;
-
-		/*
-		 * Read the right value from the MPC table and
-		 * write it into the ID register.
-		 */
-		apic_printk(APIC_VERBOSE, KERN_INFO
-			"...changing IO-APIC physical APIC ID to %d ...",
-			mp_ioapics[apic_id].apicid);
-
-		reg_00.bits.ID = mp_ioapics[apic_id].apicid;
-		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(apic_id, 0, reg_00.raw);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		/*
-		 * Sanity check
-		 */
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_00.raw = io_apic_read(apic_id, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		if (reg_00.bits.ID != mp_ioapics[apic_id].apicid)
-			printk("could not set ID!\n");
-		else
-			apic_printk(APIC_VERBOSE, " ok.\n");
-	}
-}
-#endif
-
-int no_timer_check __initdata;
-
-static int __init notimercheck(char *s)
-{
-	no_timer_check = 1;
-	return 1;
-}
-__setup("no_timer_check", notimercheck);
-
-/*
- * There is a nasty bug in some older SMP boards, their mptable lies
- * about the timer IRQ. We do the following to work around the situation:
- *
- *	- timer IRQ defaults to IO-APIC IRQ
- *	- if this function detects that timer IRQs are defunct, then we fall
- *	  back to ISA timer IRQs
- */
-static int __init timer_irq_works(void)
-{
-	unsigned long t1 = jiffies;
-	unsigned long flags;
-
-	if (no_timer_check)
-		return 1;
-
-	local_save_flags(flags);
-	local_irq_enable();
-	/* Let ten ticks pass... */
-	mdelay((10 * 1000) / HZ);
-	local_irq_restore(flags);
-
-	/*
-	 * Expect a few ticks at least, to be sure some possible
-	 * glue logic does not lock up after one or two first
-	 * ticks in a non-ExtINT mode.  Also the local APIC
-	 * might have cached one ExtINT interrupt.  Finally, at
-	 * least one tick may be lost due to delays.
-	 */
-
-	/* jiffies wrap? */
-	if (time_after(jiffies, t1 + 4))
-		return 1;
-	return 0;
-}
-
-/*
- * In the SMP+IOAPIC case it might happen that there are an unspecified
- * number of pending IRQ events unhandled. These cases are very rare,
- * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
- * better to do it this way as thus we do not have to be aware of
- * 'pending' interrupts in the IRQ path, except at this point.
- */
-/*
- * Edge triggered needs to resend any interrupt
- * that was delayed but this is now handled in the device
- * independent code.
- */
-
-/*
- * Starting up a edge-triggered IO-APIC interrupt is
- * nasty - we need to make sure that we get the edge.
- * If it is already asserted for some reason, we need
- * return 1 to indicate that is was pending.
- *
- * This is not complete - we should be able to fake
- * an edge even if it isn't on the 8259A...
- */
-
-static unsigned int startup_ioapic_irq(unsigned int irq)
-{
-	int was_pending = 0;
-	unsigned long flags;
-	struct irq_cfg *cfg;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < NR_IRQS_LEGACY) {
-		disable_8259A_irq(irq);
-		if (i8259A_irq_pending(irq))
-			was_pending = 1;
-	}
-	cfg = irq_cfg(irq);
-	__unmask_IO_APIC_irq(cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return was_pending;
-}
-
-#ifdef CONFIG_X86_64
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-
-	struct irq_cfg *cfg = irq_cfg(irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	return 1;
-}
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-	apic->send_IPI_self(irq_cfg(irq)->vector);
-
-	return 1;
-}
-#endif
-
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-#ifdef CONFIG_SMP
-
-#ifdef CONFIG_INTR_REMAP
-static void ir_irq_migration(struct work_struct *work);
-
-static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
-
-/*
- * Migrate the IO-APIC irq in the presence of intr-remapping.
- *
- * For edge triggered, irq migration is a simple atomic update(of vector
- * and cpu destination) of IRTE and flush the hardware cache.
- *
- * For level triggered, we need to modify the io-apic RTE aswell with the update
- * vector information, along with modifying IRTE with vector and destination.
- * So irq migration for level triggered is little  bit more complex compared to
- * edge triggered migration. But the good news is, we use the same algorithm
- * for level triggered migration as we have today, only difference being,
- * we now initiate the irq migration from process context instead of the
- * interrupt context.
- *
- * In future, when we do a directed EOI (combined with cpu EOI broadcast
- * suppression) to the IO-APIC, level triggered irq migration will also be
- * as simple as edge triggered migration and we can do the irq migration
- * with a simple atomic update to IO-APIC RTE.
- */
-static void
-migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-	struct irq_cfg *cfg;
-	struct irte irte;
-	int modify_ioapic_rte;
-	unsigned int dest;
-	unsigned long flags;
-	unsigned int irq;
-
-	if (!cpumask_intersects(mask, cpu_online_mask))
-		return;
-
-	irq = desc->irq;
-	if (get_irte(irq, &irte))
-		return;
-
-	cfg = desc->chip_data;
-	if (assign_irq_vector(irq, cfg, mask))
-		return;
-
-	set_extra_move_desc(desc, mask);
-
-	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
-
-	modify_ioapic_rte = desc->status & IRQ_LEVEL;
-	if (modify_ioapic_rte) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		__target_IO_APIC_irq(irq, dest, cfg);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-	}
-
-	irte.vector = cfg->vector;
-	irte.dest_id = IRTE_DEST(dest);
-
-	/*
-	 * Modified the IRTE and flushes the Interrupt entry cache.
-	 */
-	modify_irte(irq, &irte);
-
-	if (cfg->move_in_progress)
-		send_cleanup_vector(cfg);
-
-	cpumask_copy(desc->affinity, mask);
-}
-
-static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
-{
-	int ret = -1;
-	struct irq_cfg *cfg = desc->chip_data;
-
-	mask_IO_APIC_irq_desc(desc);
-
-	if (io_apic_level_ack_pending(cfg)) {
-		/*
-		 * Interrupt in progress. Migrating irq now will change the
-		 * vector information in the IO-APIC RTE and that will confuse
-		 * the EOI broadcast performed by cpu.
-		 * So, delay the irq migration to the next instance.
-		 */
-		schedule_delayed_work(&ir_migration_work, 1);
-		goto unmask;
-	}
-
-	/* everthing is clear. we have right of way */
-	migrate_ioapic_irq_desc(desc, desc->pending_mask);
-
-	ret = 0;
-	desc->status &= ~IRQ_MOVE_PENDING;
-	cpumask_clear(desc->pending_mask);
-
-unmask:
-	unmask_IO_APIC_irq_desc(desc);
-
-	return ret;
-}
-
-static void ir_irq_migration(struct work_struct *work)
-{
-	unsigned int irq;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(irq, desc) {
-		if (desc->status & IRQ_MOVE_PENDING) {
-			unsigned long flags;
-
-			spin_lock_irqsave(&desc->lock, flags);
-			if (!desc->chip->set_affinity ||
-			    !(desc->status & IRQ_MOVE_PENDING)) {
-				desc->status &= ~IRQ_MOVE_PENDING;
-				spin_unlock_irqrestore(&desc->lock, flags);
-				continue;
-			}
-
-			desc->chip->set_affinity(irq, desc->pending_mask);
-			spin_unlock_irqrestore(&desc->lock, flags);
-		}
-	}
-}
-
-/*
- * Migrates the IRQ destination in the process context.
- */
-static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
-					    const struct cpumask *mask)
-{
-	if (desc->status & IRQ_LEVEL) {
-		desc->status |= IRQ_MOVE_PENDING;
-		cpumask_copy(desc->pending_mask, mask);
-		migrate_irq_remapped_level_desc(desc);
-		return;
-	}
-
-	migrate_ioapic_irq_desc(desc, mask);
-}
-static void set_ir_ioapic_affinity_irq(unsigned int irq,
-				       const struct cpumask *mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	set_ir_ioapic_affinity_irq_desc(desc, mask);
-}
-#endif
-
-asmlinkage void smp_irq_move_cleanup_interrupt(void)
-{
-	unsigned vector, me;
-
-	ack_APIC_irq();
-	exit_idle();
-	irq_enter();
-
-	me = smp_processor_id();
-	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
-		unsigned int irq;
-		struct irq_desc *desc;
-		struct irq_cfg *cfg;
-		irq = __get_cpu_var(vector_irq)[vector];
-
-		if (irq == -1)
-			continue;
-
-		desc = irq_to_desc(irq);
-		if (!desc)
-			continue;
-
-		cfg = irq_cfg(irq);
-		spin_lock(&desc->lock);
-		if (!cfg->move_cleanup_count)
-			goto unlock;
-
-		if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
-			goto unlock;
-
-		__get_cpu_var(vector_irq)[vector] = -1;
-		cfg->move_cleanup_count--;
-unlock:
-		spin_unlock(&desc->lock);
-	}
-
-	irq_exit();
-}
-
-static void irq_complete_move(struct irq_desc **descp)
-{
-	struct irq_desc *desc = *descp;
-	struct irq_cfg *cfg = desc->chip_data;
-	unsigned vector, me;
-
-	if (likely(!cfg->move_in_progress)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-		if (likely(!cfg->move_desc_pending))
-			return;
-
-		/* domain has not changed, but affinity did */
-		me = smp_processor_id();
-		if (cpumask_test_cpu(me, desc->affinity)) {
-			*descp = desc = move_irq_desc(desc, me);
-			/* get the new one */
-			cfg = desc->chip_data;
-			cfg->move_desc_pending = 0;
-		}
-#endif
-		return;
-	}
-
-	vector = ~get_irq_regs()->orig_ax;
-	me = smp_processor_id();
-
-	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-		*descp = desc = move_irq_desc(desc, me);
-		/* get the new one */
-		cfg = desc->chip_data;
-#endif
-		send_cleanup_vector(cfg);
-	}
-}
-#else
-static inline void irq_complete_move(struct irq_desc **descp) {}
-#endif
-
-#ifdef CONFIG_INTR_REMAP
-static void ack_x2apic_level(unsigned int irq)
-{
-	ack_x2APIC_irq();
-}
-
-static void ack_x2apic_edge(unsigned int irq)
-{
-	ack_x2APIC_irq();
-}
-
-#endif
-
-static void ack_apic_edge(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	irq_complete_move(&desc);
-	move_native_irq(irq);
-	ack_APIC_irq();
-}
-
-atomic_t irq_mis_count;
-
-static void ack_apic_level(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-#ifdef CONFIG_X86_32
-	unsigned long v;
-	int i;
-#endif
-	struct irq_cfg *cfg;
-	int do_unmask_irq = 0;
-
-	irq_complete_move(&desc);
-#ifdef CONFIG_GENERIC_PENDING_IRQ
-	/* If we are moving the irq we need to mask it */
-	if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
-		do_unmask_irq = 1;
-		mask_IO_APIC_irq_desc(desc);
-	}
-#endif
-
-#ifdef CONFIG_X86_32
-	/*
-	* It appears there is an erratum which affects at least version 0x11
-	* of I/O APIC (that's the 82093AA and cores integrated into various
-	* chipsets).  Under certain conditions a level-triggered interrupt is
-	* erroneously delivered as edge-triggered one but the respective IRR
-	* bit gets set nevertheless.  As a result the I/O unit expects an EOI
-	* message but it will never arrive and further interrupts are blocked
-	* from the source.  The exact reason is so far unknown, but the
-	* phenomenon was observed when two consecutive interrupt requests
-	* from a given source get delivered to the same CPU and the source is
-	* temporarily disabled in between.
-	*
-	* A workaround is to simulate an EOI message manually.  We achieve it
-	* by setting the trigger mode to edge and then to level when the edge
-	* trigger mode gets detected in the TMR of a local APIC for a
-	* level-triggered interrupt.  We mask the source for the time of the
-	* operation to prevent an edge-triggered interrupt escaping meanwhile.
-	* The idea is from Manfred Spraul.  --macro
-	*/
-	cfg = desc->chip_data;
-	i = cfg->vector;
-
-	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-#endif
-
-	/*
-	 * We must acknowledge the irq before we move it or the acknowledge will
-	 * not propagate properly.
-	 */
-	ack_APIC_irq();
-
-	/* Now we can move and renable the irq */
-	if (unlikely(do_unmask_irq)) {
-		/* Only migrate the irq if the ack has been received.
-		 *
-		 * On rare occasions the broadcast level triggered ack gets
-		 * delayed going to ioapics, and if we reprogram the
-		 * vector while Remote IRR is still set the irq will never
-		 * fire again.
-		 *
-		 * To prevent this scenario we read the Remote IRR bit
-		 * of the ioapic.  This has two effects.
-		 * - On any sane system the read of the ioapic will
-		 *   flush writes (and acks) going to the ioapic from
-		 *   this cpu.
-		 * - We get to see if the ACK has actually been delivered.
-		 *
-		 * Based on failed experiments of reprogramming the
-		 * ioapic entry from outside of irq context starting
-		 * with masking the ioapic entry and then polling until
-		 * Remote IRR was clear before reprogramming the
-		 * ioapic I don't trust the Remote IRR bit to be
-		 * completey accurate.
-		 *
-		 * However there appears to be no other way to plug
-		 * this race, so if the Remote IRR bit is not
-		 * accurate and is causing problems then it is a hardware bug
-		 * and you can go talk to the chipset vendor about it.
-		 */
-		cfg = desc->chip_data;
-		if (!io_apic_level_ack_pending(cfg))
-			move_masked_irq(irq);
-		unmask_IO_APIC_irq_desc(desc);
-	}
-
-#ifdef CONFIG_X86_32
-	if (!(v & (1 << (i & 0x1f)))) {
-		atomic_inc(&irq_mis_count);
-		spin_lock(&ioapic_lock);
-		__mask_and_edge_IO_APIC_irq(cfg);
-		__unmask_and_level_IO_APIC_irq(cfg);
-		spin_unlock(&ioapic_lock);
-	}
-#endif
-}
-
-static struct irq_chip ioapic_chip __read_mostly = {
-	.name		= "IO-APIC",
-	.startup	= startup_ioapic_irq,
-	.mask		= mask_IO_APIC_irq,
-	.unmask		= unmask_IO_APIC_irq,
-	.ack		= ack_apic_edge,
-	.eoi		= ack_apic_level,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-#ifdef CONFIG_INTR_REMAP
-static struct irq_chip ir_ioapic_chip __read_mostly = {
-	.name		= "IR-IO-APIC",
-	.startup	= startup_ioapic_irq,
-	.mask		= mask_IO_APIC_irq,
-	.unmask		= unmask_IO_APIC_irq,
-	.ack		= ack_x2apic_edge,
-	.eoi		= ack_x2apic_level,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ir_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-#endif
-
-static inline void init_IO_APIC_traps(void)
-{
-	int irq;
-	struct irq_desc *desc;
-	struct irq_cfg *cfg;
-
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	for_each_irq_desc(irq, desc) {
-		cfg = desc->chip_data;
-		if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) {
-			/*
-			 * Hmm.. We don't have an entry for this,
-			 * so default to an old-fashioned 8259
-			 * interrupt if we can..
-			 */
-			if (irq < NR_IRQS_LEGACY)
-				make_8259A_irq(irq);
-			else
-				/* Strange. Oh, well.. */
-				desc->chip = &no_irq_chip;
-		}
-	}
-}
-
-/*
- * The local APIC irq-chip implementation:
- */
-
-static void mask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-}
-
-static void unmask_lapic_irq(unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
-}
-
-static void ack_lapic_irq(unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static struct irq_chip lapic_chip __read_mostly = {
-	.name		= "local-APIC",
-	.mask		= mask_lapic_irq,
-	.unmask		= unmask_lapic_irq,
-	.ack		= ack_lapic_irq,
-};
-
-static void lapic_register_intr(int irq, struct irq_desc *desc)
-{
-	desc->status &= ~IRQ_LEVEL;
-	set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
-				      "edge");
-}
-
-static void __init setup_nmi(void)
-{
-	/*
-	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */
-	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	apic_printk(APIC_VERBOSE, " done.\n");
-}
-
-/*
- * This looks a bit hackish but it's about the only one way of sending
- * a few INTA cycles to 8259As and any associated glue logic.  ICR does
- * not support the ExtINT mode, unfortunately.  We need to send these
- * cycles as some i82489DX-based boards have glue logic that keeps the
- * 8259A interrupt line asserted until INTA.  --macro
- */
-static inline void __init unlock_ExtINT_logic(void)
-{
-	int apic, pin, i;
-	struct IO_APIC_route_entry entry0, entry1;
-	unsigned char save_control, save_freq_select;
-
-	pin  = find_isa_irq_pin(8, mp_INT);
-	if (pin == -1) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-	apic = find_isa_irq_apic(8, mp_INT);
-	if (apic == -1) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-
-	entry0 = ioapic_read_entry(apic, pin);
-	clear_IO_APIC_pin(apic, pin);
-
-	memset(&entry1, 0, sizeof(entry1));
-
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
-	entry1.dest = hard_smp_processor_id();
-	entry1.delivery_mode = dest_ExtINT;
-	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
-	entry1.vector = 0;
-
-	ioapic_write_entry(apic, pin, entry1);
-
-	save_control = CMOS_READ(RTC_CONTROL);
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
-		   RTC_FREQ_SELECT);
-	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
-
-	i = 100;
-	while (i-- > 0) {
-		mdelay(10);
-		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
-			i -= 10;
-	}
-
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(apic, pin);
-
-	ioapic_write_entry(apic, pin, entry0);
-}
-
-static int disable_timer_pin_1 __initdata;
-/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
-static int __init disable_timer_pin_setup(char *arg)
-{
-	disable_timer_pin_1 = 1;
-	return 0;
-}
-early_param("disable_timer_pin_1", disable_timer_pin_setup);
-
-int timer_through_8259 __initdata;
-
-/*
- * This code may look a bit paranoid, but it's supposed to cooperate with
- * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
- * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
- * fanatically on his truly buggy board.
- *
- * FIXME: really need to revamp this for all platforms.
- */
-static inline void __init check_timer(void)
-{
-	struct irq_desc *desc = irq_to_desc(0);
-	struct irq_cfg *cfg = desc->chip_data;
-	int cpu = boot_cpu_id;
-	int apic1, pin1, apic2, pin2;
-	unsigned long flags;
-	int no_pin1 = 0;
-
-	local_irq_save(flags);
-
-	/*
-	 * get/set the timer IRQ vector:
-	 */
-	disable_8259A_irq(0);
-	assign_irq_vector(0, cfg, apic->target_cpus());
-
-	/*
-	 * As IRQ0 is to be enabled in the 8259A, the virtual
-	 * wire has to be disabled in the local APIC.  Also
-	 * timer interrupts need to be acknowledged manually in
-	 * the 8259A for the i82489DX when using the NMI
-	 * watchdog as that APIC treats NMIs as level-triggered.
-	 * The AEOI mode will finish them in the 8259A
-	 * automatically.
-	 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-	init_8259A(1);
-#ifdef CONFIG_X86_32
-	{
-		unsigned int ver;
-
-		ver = apic_read(APIC_LVR);
-		ver = GET_APIC_VERSION(ver);
-		timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
-	}
-#endif
-
-	pin1  = find_isa_irq_pin(0, mp_INT);
-	apic1 = find_isa_irq_apic(0, mp_INT);
-	pin2  = ioapic_i8259.pin;
-	apic2 = ioapic_i8259.apic;
-
-	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
-		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		    cfg->vector, apic1, pin1, apic2, pin2);
-
-	/*
-	 * Some BIOS writers are clueless and report the ExtINTA
-	 * I/O APIC input from the cascaded 8259A as the timer
-	 * interrupt input.  So just in case, if only one pin
-	 * was found above, try it both directly and through the
-	 * 8259A.
-	 */
-	if (pin1 == -1) {
-#ifdef CONFIG_INTR_REMAP
-		if (intr_remapping_enabled)
-			panic("BIOS bug: timer not connected to IO-APIC");
-#endif
-		pin1 = pin2;
-		apic1 = apic2;
-		no_pin1 = 1;
-	} else if (pin2 == -1) {
-		pin2 = pin1;
-		apic2 = apic1;
-	}
-
-	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
-		if (no_pin1) {
-			add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
-			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
-		} else {
-			/* for edge trigger, setup_IO_APIC_irq already
-			 * leave it unmasked.
-			 * so only need to unmask if it is level-trigger
-			 * do we really have level trigger timer?
-			 */
-			int idx;
-			idx = find_irq_entry(apic1, pin1, mp_INT);
-			if (idx != -1 && irq_trigger(idx))
-				unmask_IO_APIC_irq_desc(desc);
-		}
-		if (timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			if (disable_timer_pin_1 > 0)
-				clear_IO_APIC_pin(0, pin1);
-			goto out;
-		}
-#ifdef CONFIG_INTR_REMAP
-		if (intr_remapping_enabled)
-			panic("timer doesn't work through Interrupt-remapped IO-APIC");
-#endif
-		local_irq_disable();
-		clear_IO_APIC_pin(apic1, pin1);
-		if (!no_pin1)
-			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
-				    "8254 timer not connected to IO-APIC\n");
-
-		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
-			    "(IRQ0) through the 8259A ...\n");
-		apic_printk(APIC_QUIET, KERN_INFO
-			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
-		/*
-		 * legacy devices should be connected to IO APIC #0
-		 */
-		replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
-		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
-		enable_8259A_irq(0);
-		if (timer_irq_works()) {
-			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
-			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			goto out;
-		}
-		/*
-		 * Cleanup, just in case ...
-		 */
-		local_irq_disable();
-		disable_8259A_irq(0);
-		clear_IO_APIC_pin(apic2, pin2);
-		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
-	}
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as Virtual Wire IRQ...\n");
-
-	lapic_register_intr(0, desc);
-	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
-	enable_8259A_irq(0);
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	local_irq_disable();
-	disable_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
-
-	apic_printk(APIC_QUIET, KERN_INFO
-		    "...trying to set up timer as ExtINT IRQ...\n");
-
-	init_8259A(0);
-	make_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-
-	unlock_ExtINT_logic();
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
-		goto out;
-	}
-	local_irq_disable();
-	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
-	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option.\n");
-out:
-	local_irq_restore(flags);
-}
-
-/*
- * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
- * to devices.  However there may be an I/O APIC pin available for
- * this interrupt regardless.  The pin may be left unconnected, but
- * typically it will be reused as an ExtINT cascade interrupt for
- * the master 8259A.  In the MPS case such a pin will normally be
- * reported as an ExtINT interrupt in the MP table.  With ACPI
- * there is no provision for ExtINT interrupts, and in the absence
- * of an override it would be treated as an ordinary ISA I/O APIC
- * interrupt, that is edge-triggered and unmasked by default.  We
- * used to do this, but it caused problems on some systems because
- * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
- * the same ExtINT cascade interrupt to drive the local APIC of the
- * bootstrap processor.  Therefore we refrain from routing IRQ2 to
- * the I/O APIC in all cases now.  No actual device should request
- * it anyway.  --macro
- */
-#define PIC_IRQS	(1 << PIC_CASCADE_IR)
-
-void __init setup_IO_APIC(void)
-{
-
-	/*
-	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
-	 */
-
-	io_apic_irqs = ~PIC_IRQS;
-
-	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
-	/*
-         * Set up IO-APIC IRQ routing.
-         */
-#ifdef CONFIG_X86_32
-	if (!acpi_ioapic)
-		setup_ioapic_ids_from_mpc();
-#endif
-	sync_Arb_IDs();
-	setup_IO_APIC_irqs();
-	init_IO_APIC_traps();
-	check_timer();
-}
-
-/*
- *      Called after all the initialization is done. If we didnt find any
- *      APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
-	if (sis_apic_bug == -1)
-		sis_apic_bug = 0;
-	return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
-struct sysfs_ioapic_data {
-	struct sys_device dev;
-	struct IO_APIC_route_entry entry[0];
-};
-static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
-
-static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
-		*entry = ioapic_read_entry(dev->id, i);
-
-	return 0;
-}
-
-static int ioapic_resume(struct sys_device *dev)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	unsigned long flags;
-	union IO_APIC_reg_00 reg_00;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].apicid;
-		io_apic_write(dev->id, 0, reg_00.raw);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
-		ioapic_write_entry(dev->id, i, entry[i]);
-
-	return 0;
-}
-
-static struct sysdev_class ioapic_sysdev_class = {
-	.name = "ioapic",
-	.suspend = ioapic_suspend,
-	.resume = ioapic_resume,
-};
-
-static int __init ioapic_init_sysfs(void)
-{
-	struct sys_device * dev;
-	int i, size, error;
-
-	error = sysdev_class_register(&ioapic_sysdev_class);
-	if (error)
-		return error;
-
-	for (i = 0; i < nr_ioapics; i++ ) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
-			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
-		if (!mp_ioapic_data[i]) {
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i;
-		dev->cls = &ioapic_sysdev_class;
-		error = sysdev_register(dev);
-		if (error) {
-			kfree(mp_ioapic_data[i]);
-			mp_ioapic_data[i] = NULL;
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-	}
-
-	return 0;
-}
-
-device_initcall(ioapic_init_sysfs);
-
-static int nr_irqs_gsi = NR_IRQS_LEGACY;
-/*
- * Dynamic irq allocate and deallocation
- */
-unsigned int create_irq_nr(unsigned int irq_want)
-{
-	/* Allocate an unused irq */
-	unsigned int irq;
-	unsigned int new;
-	unsigned long flags;
-	struct irq_cfg *cfg_new = NULL;
-	int cpu = boot_cpu_id;
-	struct irq_desc *desc_new = NULL;
-
-	irq = 0;
-	if (irq_want < nr_irqs_gsi)
-		irq_want = nr_irqs_gsi;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	for (new = irq_want; new < nr_irqs; new++) {
-		desc_new = irq_to_desc_alloc_cpu(new, cpu);
-		if (!desc_new) {
-			printk(KERN_INFO "can not get irq_desc for %d\n", new);
-			continue;
-		}
-		cfg_new = desc_new->chip_data;
-
-		if (cfg_new->vector != 0)
-			continue;
-		if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
-			irq = new;
-		break;
-	}
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	if (irq > 0) {
-		dynamic_irq_init(irq);
-		/* restore it, in case dynamic_irq_init clear it */
-		if (desc_new)
-			desc_new->chip_data = cfg_new;
-	}
-	return irq;
-}
-
-int create_irq(void)
-{
-	unsigned int irq_want;
-	int irq;
-
-	irq_want = nr_irqs_gsi;
-	irq = create_irq_nr(irq_want);
-
-	if (irq == 0)
-		irq = -1;
-
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	unsigned long flags;
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
-
-	/* store it, in case dynamic_irq_cleanup clear it */
-	desc = irq_to_desc(irq);
-	cfg = desc->chip_data;
-	dynamic_irq_cleanup(irq);
-	/* connect back irq_cfg */
-	if (desc)
-		desc->chip_data = cfg;
-
-#ifdef CONFIG_INTR_REMAP
-	free_irte(irq);
-#endif
-	spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq, cfg);
-	spin_unlock_irqrestore(&vector_lock, flags);
-}
-
-/*
- * MSI message composition
- */
-#ifdef CONFIG_PCI_MSI
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
-{
-	struct irq_cfg *cfg;
-	int err;
-	unsigned dest;
-
-	if (disable_apic)
-		return -ENXIO;
-
-	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, apic->target_cpus());
-	if (err)
-		return err;
-
-	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
-
-#ifdef CONFIG_INTR_REMAP
-	if (irq_remapped(irq)) {
-		struct irte irte;
-		int ir_index;
-		u16 sub_handle;
-
-		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
-		BUG_ON(ir_index == -1);
-
-		memset (&irte, 0, sizeof(irte));
-
-		irte.present = 1;
-		irte.dst_mode = apic->irq_dest_mode;
-		irte.trigger_mode = 0; /* edge */
-		irte.dlvry_mode = apic->irq_delivery_mode;
-		irte.vector = cfg->vector;
-		irte.dest_id = IRTE_DEST(dest);
-
-		modify_irte(irq, &irte);
-
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->data = sub_handle;
-		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
-				  MSI_ADDR_IR_SHV |
-				  MSI_ADDR_IR_INDEX1(ir_index) |
-				  MSI_ADDR_IR_INDEX2(ir_index);
-	} else
-#endif
-	{
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((apic->irq_dest_mode == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
-
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(cfg->vector);
-	}
-	return err;
-}
-
-#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	struct irq_cfg *cfg;
-	struct msi_msg msg;
-	unsigned int dest;
-
-	dest = set_desc_affinity(desc, mask);
-	if (dest == BAD_APICID)
-		return;
-
-	cfg = desc->chip_data;
-
-	read_msi_msg_desc(desc, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	write_msi_msg_desc(desc, &msg);
-}
-#ifdef CONFIG_INTR_REMAP
-/*
- * Migrate the MSI irq to another cpumask. This migration is
- * done in the process context using interrupt-remapping hardware.
- */
-static void
-ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	struct irq_cfg *cfg = desc->chip_data;
-	unsigned int dest;
-	struct irte irte;
-
-	if (get_irte(irq, &irte))
-		return;
-
-	dest = set_desc_affinity(desc, mask);
-	if (dest == BAD_APICID)
-		return;
-
-	irte.vector = cfg->vector;
-	irte.dest_id = IRTE_DEST(dest);
-
-	/*
-	 * atomically update the IRTE with the new destination and vector.
-	 */
-	modify_irte(irq, &irte);
-
-	/*
-	 * After this point, all the interrupts will start arriving
-	 * at the new destination. So, time to cleanup the previous
-	 * vector allocation.
-	 */
-	if (cfg->move_in_progress)
-		send_cleanup_vector(cfg);
-}
-
-#endif
-#endif /* CONFIG_SMP */
-
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
- */
-static struct irq_chip msi_chip = {
-	.name		= "PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-#ifdef CONFIG_INTR_REMAP
-static struct irq_chip msi_ir_chip = {
-	.name		= "IR-PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_x2apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= ir_set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
-{
-	struct intel_iommu *iommu;
-	int index;
-
-	iommu = map_dev_to_ir(dev);
-	if (!iommu) {
-		printk(KERN_ERR
-		       "Unable to map PCI %s to iommu\n", pci_name(dev));
-		return -ENOENT;
-	}
-
-	index = alloc_irte(iommu, irq, nvec);
-	if (index < 0) {
-		printk(KERN_ERR
-		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
-		       pci_name(dev));
-		return -ENOSPC;
-	}
-	return index;
-}
-#endif
-
-static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
-{
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(dev, irq, &msg);
-	if (ret < 0)
-		return ret;
-
-	set_irq_msi(irq, msidesc);
-	write_msi_msg(irq, &msg);
-
-#ifdef CONFIG_INTR_REMAP
-	if (irq_remapped(irq)) {
-		struct irq_desc *desc = irq_to_desc(irq);
-		/*
-		 * irq migration in process context
-		 */
-		desc->status |= IRQ_MOVE_PCNTXT;
-		set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
-	} else
-#endif
-		set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
-
-	dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq);
-
-	return 0;
-}
-
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	unsigned int irq;
-	int ret, sub_handle;
-	struct msi_desc *msidesc;
-	unsigned int irq_want;
-
-#ifdef CONFIG_INTR_REMAP
-	struct intel_iommu *iommu = 0;
-	int index = 0;
-#endif
-
-	irq_want = nr_irqs_gsi;
-	sub_handle = 0;
-	list_for_each_entry(msidesc, &dev->msi_list, list) {
-		irq = create_irq_nr(irq_want);
-		if (irq == 0)
-			return -1;
-		irq_want = irq + 1;
-#ifdef CONFIG_INTR_REMAP
-		if (!intr_remapping_enabled)
-			goto no_ir;
-
-		if (!sub_handle) {
-			/*
-			 * allocate the consecutive block of IRTE's
-			 * for 'nvec'
-			 */
-			index = msi_alloc_irte(dev, irq, nvec);
-			if (index < 0) {
-				ret = index;
-				goto error;
-			}
-		} else {
-			iommu = map_dev_to_ir(dev);
-			if (!iommu) {
-				ret = -ENOENT;
-				goto error;
-			}
-			/*
-			 * setup the mapping between the irq and the IRTE
-			 * base index, the sub_handle pointing to the
-			 * appropriate interrupt remap table entry.
-			 */
-			set_irte_irq(irq, iommu, index, sub_handle);
-		}
-no_ir:
-#endif
-		ret = setup_msi_irq(dev, msidesc, irq);
-		if (ret < 0)
-			goto error;
-		sub_handle++;
-	}
-	return 0;
-
-error:
-	destroy_irq(irq);
-	return ret;
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
-#ifdef CONFIG_DMAR
-#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	struct irq_cfg *cfg;
-	struct msi_msg msg;
-	unsigned int dest;
-
-	dest = set_desc_affinity(desc, mask);
-	if (dest == BAD_APICID)
-		return;
-
-	cfg = desc->chip_data;
-
-	dmar_msi_read(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	dmar_msi_write(irq, &msg);
-}
-
-#endif /* CONFIG_SMP */
-
-struct irq_chip dmar_msi_type = {
-	.name = "DMAR_MSI",
-	.unmask = dmar_msi_unmask,
-	.mask = dmar_msi_mask,
-	.ack = ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity = dmar_msi_set_affinity,
-#endif
-	.retrigger = ioapic_retrigger_irq,
-};
-
-int arch_setup_dmar_msi(unsigned int irq)
-{
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(NULL, irq, &msg);
-	if (ret < 0)
-		return ret;
-	dmar_msi_write(irq, &msg);
-	set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-		"edge");
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_HPET_TIMER
-
-#ifdef CONFIG_SMP
-static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	struct irq_cfg *cfg;
-	struct msi_msg msg;
-	unsigned int dest;
-
-	dest = set_desc_affinity(desc, mask);
-	if (dest == BAD_APICID)
-		return;
-
-	cfg = desc->chip_data;
-
-	hpet_msi_read(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	hpet_msi_write(irq, &msg);
-}
-
-#endif /* CONFIG_SMP */
-
-struct irq_chip hpet_msi_type = {
-	.name = "HPET_MSI",
-	.unmask = hpet_msi_unmask,
-	.mask = hpet_msi_mask,
-	.ack = ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity = hpet_msi_set_affinity,
-#endif
-	.retrigger = ioapic_retrigger_irq,
-};
-
-int arch_setup_hpet_msi(unsigned int irq)
-{
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(NULL, irq, &msg);
-	if (ret < 0)
-		return ret;
-
-	hpet_msi_write(irq, &msg);
-	set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
-		"edge");
-
-	return 0;
-}
-#endif
-
-#endif /* CONFIG_PCI_MSI */
-/*
- * Hypertransport interrupt support
- */
-#ifdef CONFIG_HT_IRQ
-
-#ifdef CONFIG_SMP
-
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	struct ht_irq_msg msg;
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
-static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	struct irq_cfg *cfg;
-	unsigned int dest;
-
-	dest = set_desc_affinity(desc, mask);
-	if (dest == BAD_APICID)
-		return;
-
-	cfg = desc->chip_data;
-
-	target_ht_irq(irq, dest, cfg->vector);
-}
-
-#endif
-
-static struct irq_chip ht_irq_chip = {
-	.name		= "PCI-HT",
-	.mask		= mask_ht_irq,
-	.unmask		= unmask_ht_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ht_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
-{
-	struct irq_cfg *cfg;
-	int err;
-
-	if (disable_apic)
-		return -ENXIO;
-
-	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, apic->target_cpus());
-	if (!err) {
-		struct ht_irq_msg msg;
-		unsigned dest;
-
-		dest = apic->cpu_mask_to_apicid_and(cfg->domain,
-						    apic->target_cpus());
-
-		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
-		msg.address_lo =
-			HT_IRQ_LOW_BASE |
-			HT_IRQ_LOW_DEST_ID(dest) |
-			HT_IRQ_LOW_VECTOR(cfg->vector) |
-			((apic->irq_dest_mode == 0) ?
-				HT_IRQ_LOW_DM_PHYSICAL :
-				HT_IRQ_LOW_DM_LOGICAL) |
-			HT_IRQ_LOW_RQEOI_EDGE |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				HT_IRQ_LOW_MT_FIXED :
-				HT_IRQ_LOW_MT_ARBITRATED) |
-			HT_IRQ_LOW_IRQ_MASKED;
-
-		write_ht_irq_msg(irq, &msg);
-
-		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
-					      handle_edge_irq, "edge");
-
-		dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
-	}
-	return err;
-}
-#endif /* CONFIG_HT_IRQ */
-
-#ifdef CONFIG_X86_UV
-/*
- * Re-target the irq to the specified CPU and enable the specified MMR located
- * on the specified blade to allow the sending of MSIs to the specified CPU.
- */
-int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
-		       unsigned long mmr_offset)
-{
-	const struct cpumask *eligible_cpu = cpumask_of(cpu);
-	struct irq_cfg *cfg;
-	int mmr_pnode;
-	unsigned long mmr_value;
-	struct uv_IO_APIC_route_entry *entry;
-	unsigned long flags;
-	int err;
-
-	cfg = irq_cfg(irq);
-
-	err = assign_irq_vector(irq, cfg, eligible_cpu);
-	if (err != 0)
-		return err;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
-				      irq_name);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	mmr_value = 0;
-	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	entry->vector = cfg->vector;
-	entry->delivery_mode = apic->irq_delivery_mode;
-	entry->dest_mode = apic->irq_dest_mode;
-	entry->polarity = 0;
-	entry->trigger = 0;
-	entry->mask = 0;
-	entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
-
-	mmr_pnode = uv_blade_to_pnode(mmr_blade);
-	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-
-	return irq;
-}
-
-/*
- * Disable the specified MMR located on the specified blade so that MSIs are
- * longer allowed to be sent.
- */
-void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
-{
-	unsigned long mmr_value;
-	struct uv_IO_APIC_route_entry *entry;
-	int mmr_pnode;
-
-	mmr_value = 0;
-	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	entry->mask = 1;
-
-	mmr_pnode = uv_blade_to_pnode(mmr_blade);
-	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-}
-#endif /* CONFIG_X86_64 */
-
-int __init io_apic_get_redir_entries (int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.entries;
-}
-
-void __init probe_nr_irqs_gsi(void)
-{
-	int nr = 0;
-
-	nr = acpi_probe_gsi();
-	if (nr > nr_irqs_gsi) {
-		nr_irqs_gsi = nr;
-	} else {
-		/* for acpi=off or acpi is not compiled in */
-		int idx;
-
-		nr = 0;
-		for (idx = 0; idx < nr_ioapics; idx++)
-			nr += io_apic_get_redir_entries(idx) + 1;
-
-		if (nr > nr_irqs_gsi)
-			nr_irqs_gsi = nr;
-	}
-
-	printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
-}
-
-#ifdef CONFIG_SPARSE_IRQ
-int __init arch_probe_nr_irqs(void)
-{
-	int nr;
-
-	if (nr_irqs > (NR_VECTORS * nr_cpu_ids))
-		nr_irqs = NR_VECTORS * nr_cpu_ids;
-
-	nr = nr_irqs_gsi + 8 * nr_cpu_ids;
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ)
-	/*
-	 * for MSI and HT dyn irq
-	 */
-	nr += nr_irqs_gsi * 16;
-#endif
-	if (nr < nr_irqs)
-		nr_irqs = nr;
-
-	return 0;
-}
-#endif
-
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-#ifdef CONFIG_X86_32
-int __init io_apic_get_unique_id(int ioapic, int apic_id)
-{
-	union IO_APIC_reg_00 reg_00;
-	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
-	physid_mask_t tmp;
-	unsigned long flags;
-	int i = 0;
-
-	/*
-	 * The P4 platform supports up to 256 APIC IDs on two separate APIC
-	 * buses (one for LAPICs, one for IOAPICs), where predecessors only
-	 * supports up to 16 on one shared APIC bus.
-	 *
-	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
-	 *      advantage of new APIC bus architecture.
-	 */
-
-	if (physids_empty(apic_id_map))
-		apic_id_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(ioapic, 0);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	if (apic_id >= get_physical_broadcast()) {
-		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
-			"%d\n", ioapic, apic_id, reg_00.bits.ID);
-		apic_id = reg_00.bits.ID;
-	}
-
-	/*
-	 * Every APIC in a system must have a unique ID or we get lots of nice
-	 * 'stuck on smp_invalidate_needed IPI wait' messages.
-	 */
-	if (apic->check_apicid_used(apic_id_map, apic_id)) {
-
-		for (i = 0; i < get_physical_broadcast(); i++) {
-			if (!apic->check_apicid_used(apic_id_map, i))
-				break;
-		}
-
-		if (i == get_physical_broadcast())
-			panic("Max apic_id exceeded!\n");
-
-		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
-			"trying %d\n", ioapic, apic_id, i);
-
-		apic_id = i;
-	}
-
-	tmp = apic->apicid_to_cpu_present(apic_id);
-	physids_or(apic_id_map, apic_id_map, tmp);
-
-	if (reg_00.bits.ID != apic_id) {
-		reg_00.bits.ID = apic_id;
-
-		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(ioapic, 0, reg_00.raw);
-		reg_00.raw = io_apic_read(ioapic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-
-		/* Sanity check */
-		if (reg_00.bits.ID != apic_id) {
-			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
-			return -1;
-		}
-	}
-
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
-
-	return apic_id;
-}
-
-int __init io_apic_get_version(int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.version;
-}
-#endif
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
-	struct irq_desc *desc;
-	struct irq_cfg *cfg;
-	int cpu = boot_cpu_id;
-
-	if (!IO_APIC_IRQ(irq)) {
-		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
-			ioapic);
-		return -EINVAL;
-	}
-
-	desc = irq_to_desc_alloc_cpu(irq, cpu);
-	if (!desc) {
-		printk(KERN_INFO "can not get irq_desc %d\n", irq);
-		return 0;
-	}
-
-	/*
-	 * IRQs < 16 are already in the irq_2_pin[] map
-	 */
-	if (irq >= NR_IRQS_LEGACY) {
-		cfg = desc->chip_data;
-		add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
-	}
-
-	setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
-	return 0;
-}
-
-
-int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
-{
-	int i;
-
-	if (skip_ioapic_setup)
-		return -1;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].irqtype == mp_INT &&
-		    mp_irqs[i].srcbusirq == bus_irq)
-			break;
-	if (i >= mp_irq_entries)
-		return -1;
-
-	*trigger = irq_trigger(i);
-	*polarity = irq_polarity(i);
-	return 0;
-}
-
-#endif /* CONFIG_ACPI */
-
-/*
- * This function currently is only a helper for the i386 smp boot process where
- * we need to reprogram the ioredtbls to cater for the cpus which have come online
- * so mask in all cases should simply be apic->target_cpus()
- */
-#ifdef CONFIG_SMP
-void __init setup_ioapic_dest(void)
-{
-	int pin, ioapic, irq, irq_entry;
-	struct irq_desc *desc;
-	struct irq_cfg *cfg;
-	const struct cpumask *mask;
-
-	if (skip_ioapic_setup == 1)
-		return;
-
-	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
-		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
-			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
-			if (irq_entry == -1)
-				continue;
-			irq = pin_2_irq(irq_entry, ioapic, pin);
-
-			/* setup_IO_APIC_irqs could fail to get vector for some device
-			 * when you have too many devices, because at that time only boot
-			 * cpu is online.
-			 */
-			desc = irq_to_desc(irq);
-			cfg = desc->chip_data;
-			if (!cfg->vector) {
-				setup_IO_APIC_irq(ioapic, pin, irq, desc,
-						  irq_trigger(irq_entry),
-						  irq_polarity(irq_entry));
-				continue;
-
-			}
-
-			/*
-			 * Honour affinities which have been set in early boot
-			 */
-			if (desc->status &
-			    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
-				mask = desc->affinity;
-			else
-				mask = apic->target_cpus();
-
-#ifdef CONFIG_INTR_REMAP
-			if (intr_remapping_enabled)
-				set_ir_ioapic_affinity_irq_desc(desc, mask);
-			else
-#endif
-				set_ioapic_affinity_irq_desc(desc, mask);
-		}
-
-	}
-}
-#endif
-
-#define IOAPIC_RESOURCE_NAME_SIZE 11
-
-static struct resource *ioapic_resources;
-
-static struct resource * __init ioapic_setup_resources(void)
-{
-	unsigned long n;
-	struct resource *res;
-	char *mem;
-	int i;
-
-	if (nr_ioapics <= 0)
-		return NULL;
-
-	n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
-	n *= nr_ioapics;
-
-	mem = alloc_bootmem(n);
-	res = (void *)mem;
-
-	if (mem != NULL) {
-		mem += sizeof(struct resource) * nr_ioapics;
-
-		for (i = 0; i < nr_ioapics; i++) {
-			res[i].name = mem;
-			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-			sprintf(mem,  "IOAPIC %u", i);
-			mem += IOAPIC_RESOURCE_NAME_SIZE;
-		}
-	}
-
-	ioapic_resources = res;
-
-	return res;
-}
-
-void __init ioapic_init_mappings(void)
-{
-	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-	struct resource *ioapic_res;
-	int i;
-
-	ioapic_res = ioapic_setup_resources();
-	for (i = 0; i < nr_ioapics; i++) {
-		if (smp_found_config) {
-			ioapic_phys = mp_ioapics[i].apicaddr;
-#ifdef CONFIG_X86_32
-			if (!ioapic_phys) {
-				printk(KERN_ERR
-				       "WARNING: bogus zero IO-APIC "
-				       "address found in MPTABLE, "
-				       "disabling IO/APIC support!\n");
-				smp_found_config = 0;
-				skip_ioapic_setup = 1;
-				goto fake_ioapic_page;
-			}
-#endif
-		} else {
-#ifdef CONFIG_X86_32
-fake_ioapic_page:
-#endif
-			ioapic_phys = (unsigned long)
-				alloc_bootmem_pages(PAGE_SIZE);
-			ioapic_phys = __pa(ioapic_phys);
-		}
-		set_fixmap_nocache(idx, ioapic_phys);
-		apic_printk(APIC_VERBOSE,
-			    "mapped IOAPIC to %08lx (%08lx)\n",
-			    __fix_to_virt(idx), ioapic_phys);
-		idx++;
-
-		if (ioapic_res != NULL) {
-			ioapic_res->start = ioapic_phys;
-			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
-			ioapic_res++;
-		}
-	}
-}
-
-static int __init ioapic_insert_resources(void)
-{
-	int i;
-	struct resource *r = ioapic_resources;
-
-	if (!r) {
-		printk(KERN_ERR
-		       "IO APIC resources could be not be allocated.\n");
-		return -1;
-	}
-
-	for (i = 0; i < nr_ioapics; i++) {
-		insert_resource(&iomem_resource, r);
-		r++;
-	}
-
-	return 0;
-}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
deleted file mode 100644
index dbf5445727a..00000000000
--- a/arch/x86/kernel/ipi.c
+++ /dev/null
@@ -1,164 +0,0 @@
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/cache.h>
-#include <linux/cpu.h>
-#include <linux/module.h>
-
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/apic.h>
-#include <asm/proto.h>
-#include <asm/ipi.h>
-
-void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
-{
-	unsigned long query_cpu;
-	unsigned long flags;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicast to each CPU instead.
-	 * - mbligh
-	 */
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
-				query_cpu), vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
-						 int vector)
-{
-	unsigned int this_cpu = smp_processor_id();
-	unsigned int query_cpu;
-	unsigned long flags;
-
-	/* See Hack comment above */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid,
-				 query_cpu), vector, APIC_DEST_PHYSICAL);
-	}
-	local_irq_restore(flags);
-}
-
-void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
-						 int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send
-	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
-	 * should be modified to do 1 message per cluster ID - mbligh
-	 */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask)
-		__default_send_IPI_dest_field(
-			apic->cpu_to_logical_apicid(query_cpu), vector,
-			apic->dest_logical);
-	local_irq_restore(flags);
-}
-
-void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask,
-						 int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-	unsigned int this_cpu = smp_processor_id();
-
-	/* See Hack comment above */
-
-	local_irq_save(flags);
-	for_each_cpu(query_cpu, mask) {
-		if (query_cpu == this_cpu)
-			continue;
-		__default_send_IPI_dest_field(
-			apic->cpu_to_logical_apicid(query_cpu), vector,
-			apic->dest_logical);
-		}
-	local_irq_restore(flags);
-}
-
-#ifdef CONFIG_X86_32
-
-/*
- * This is only used on smaller machines.
- */
-void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-	unsigned long flags;
-
-	local_irq_save(flags);
-	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
-	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
-	local_irq_restore(flags);
-}
-
-void default_send_IPI_allbutself(int vector)
-{
-	/*
-	 * if there are no other CPUs in the system then we get an APIC send
-	 * error if we try to broadcast, thus avoid sending IPIs in this case.
-	 */
-	if (!(num_online_cpus() > 1))
-		return;
-
-	__default_local_send_IPI_allbutself(vector);
-}
-
-void default_send_IPI_all(int vector)
-{
-	__default_local_send_IPI_all(vector);
-}
-
-void default_send_IPI_self(int vector)
-{
-	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, apic->dest_logical);
-}
-
-/* must come after the send_IPI functions above for inlining */
-static int convert_apicid_to_cpu(int apic_id)
-{
-	int i;
-
-	for_each_possible_cpu(i) {
-		if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
-			return i;
-	}
-	return -1;
-}
-
-int safe_smp_processor_id(void)
-{
-	int apicid, cpuid;
-
-	if (!boot_cpu_has(X86_FEATURE_APIC))
-		return 0;
-
-	apicid = hard_smp_processor_id();
-	if (apicid == BAD_APICID)
-		return 0;
-
-	cpuid = convert_apicid_to_cpu(apicid);
-
-	return cpuid >= 0 ? cpuid : 0;
-}
-#endif
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
deleted file mode 100644
index bdfad80c3cf..00000000000
--- a/arch/x86/kernel/nmi.c
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <mingo@redhat.com>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <asm/apic.h>
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/smp.h>
-
-#include <asm/i8259.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/timer.h>
-
-#include <asm/mce.h>
-
-#include <asm/mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
-
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-
-static int panic_on_timeout;
-
-static unsigned int nmi_hz = HZ;
-static DEFINE_PER_CPU(short, wd_enabled);
-static int endflag __initdata;
-
-static inline unsigned int get_nmi_count(int cpu)
-{
-	return per_cpu(irq_stat, cpu).__nmi_count;
-}
-
-static inline int mce_in_progress(void)
-{
-#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
-	return atomic_read(&mce_entry) > 0;
-#endif
-	return 0;
-}
-
-/*
- * Take the local apic timer and PIT/HPET into account. We don't
- * know which one is active, when we have highres/dyntick on
- */
-static inline unsigned int get_timer_irqs(int cpu)
-{
-	return per_cpu(irq_stat, cpu).apic_timer_irqs +
-		per_cpu(irq_stat, cpu).irq0_irqs;
-}
-
-#ifdef CONFIG_SMP
-/*
- * The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/*
-	 * Intentionally don't use cpu_relax here. This is
-	 * to make sure that the performance counter really ticks,
-	 * even if there is a simulator or similar that catches the
-	 * pause instruction. On a real HT machine this is fine because
-	 * all other CPUs are busy with "useless" delay loops and don't
-	 * care if they get somewhat less cycles.
-	 */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-static void report_broken_nmi(int cpu, int *prev_nmi_count)
-{
-	printk(KERN_CONT "\n");
-
-	printk(KERN_WARNING
-		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
-			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
-
-	printk(KERN_WARNING
-		"Please report this to bugzilla.kernel.org,\n");
-	printk(KERN_WARNING
-		"and attach the output of the 'dmesg' command.\n");
-
-	per_cpu(wd_enabled, cpu) = 0;
-	atomic_dec(&nmi_active);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-int __init check_nmi_watchdog(void)
-{
-	unsigned int *prev_nmi_count;
-	int cpu;
-
-	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
-		return 0;
-
-	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
-	if (!prev_nmi_count)
-		goto error;
-
-	printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
-#endif
-
-	for_each_possible_cpu(cpu)
-		prev_nmi_count[cpu] = get_nmi_count(cpu);
-	local_irq_enable();
-	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
-
-	for_each_online_cpu(cpu) {
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
-			report_broken_nmi(cpu, prev_nmi_count);
-	}
-	endflag = 1;
-	if (!atomic_read(&nmi_active)) {
-		kfree(prev_nmi_count);
-		atomic_set(&nmi_active, -1);
-		goto error;
-	}
-	printk("OK.\n");
-
-	/*
-	 * now that we know it works we can reduce NMI frequency to
-	 * something more reasonable; makes a difference in some configs
-	 */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(prev_nmi_count);
-	return 0;
-error:
-	if (nmi_watchdog == NMI_IO_APIC) {
-		if (!timer_through_8259)
-			disable_8259A_irq(0);
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-	}
-
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-	return -1;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
-	unsigned int nmi;
-
-	if (!strncmp(str, "panic", 5)) {
-		panic_on_timeout = 1;
-		str = strchr(str, ',');
-		if (!str)
-			return 1;
-		++str;
-	}
-
-	if (!strncmp(str, "lapic", 5))
-		nmi_watchdog = NMI_LOCAL_APIC;
-	else if (!strncmp(str, "ioapic", 6))
-		nmi_watchdog = NMI_IO_APIC;
-	else {
-		get_option(&str, &nmi);
-		if (nmi >= NMI_INVALID)
-			return 0;
-		nmi_watchdog = nmi;
-	}
-
-	return 1;
-}
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-/*
- * Suspend/resume support
- */
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
-	.name		= "lapic_nmi",
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/*
-	 * should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0)
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 1);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-}
-
-/*
- * This function is called as soon the LAPIC NMI watchdog driver has everything
- * in place and it's ready to check if the NMIs belong to the NMI watchdog
- */
-void cpu_nmi_set_wd_enabled(void)
-{
-	__get_cpu_var(wd_enabled) = 1;
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled))
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if (!nmi_watchdog_active())
-		return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	else
-		__acpi_nmi_disable(NULL);
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up here too!]
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(local_t, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog_active()) {
-		unsigned cpu;
-
-		/*
-		 * Tell other CPUs to reset their alert counters. We cannot
-		 * do it ourselves because the alert count increase is not
-		 * atomic.
-		 */
-		for_each_present_cpu(cpu) {
-			if (per_cpu(nmi_touch, cpu) != 1)
-				per_cpu(nmi_touch, cpu) = 1;
-		}
-	}
-
-	/*
-	 * Tickle the softlockup detector too:
-	 */
-	touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-	/*
-	 * Since current_thread_info()-> is always on the stack, and we
-	 * always switch the stack NMI-atomically, it's safe to use
-	 * smp_processor_id().
-	 */
-	unsigned int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	/* check for other users first */
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
-			== NOTIFY_STOP) {
-		rc = 1;
-		touched = 1;
-	}
-
-	sum = get_timer_irqs(cpu);
-
-	if (__get_cpu_var(nmi_touch)) {
-		__get_cpu_var(nmi_touch) = 0;
-		touched = 1;
-	}
-
-	if (cpu_isset(cpu, backtrace_mask)) {
-		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
-
-		spin_lock(&lock);
-		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
-		dump_stack();
-		spin_unlock(&lock);
-		cpu_clear(cpu, backtrace_mask);
-	}
-
-	/* Could check oops_in_progress here too, but it's safer not to */
-	if (mce_in_progress())
-		touched = 1;
-
-	/* if the none of the timers isn't firing, this cpu isn't doing much */
-	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		local_inc(&__get_cpu_var(alert_counter));
-		if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
-			/*
-			 * die_nmi will return ONLY if NOTIFY_STOP happens..
-			 */
-			die_nmi("BUG: NMI Watchdog detected LOCKUP",
-				regs, panic_on_timeout);
-	} else {
-		__get_cpu_var(last_irq_sum) = sum;
-		local_set(&__get_cpu_var(alert_counter), 0);
-	}
-
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/*
-		 * don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static void enable_ioapic_nmi_watchdog_single(void *unused)
-{
-	__get_cpu_var(wd_enabled) = 1;
-	atomic_inc(&nmi_active);
-	__acpi_nmi_enable(NULL);
-}
-
-static void enable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1);
-	touch_nmi_watchdog();
-}
-
-static void disable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
-}
-
-static int __init setup_unknown_nmi_panic(char *str)
-{
-	unknown_nmi_panic = 1;
-	return 1;
-}
-__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1); /* Always panic here */
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, file, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
-		printk(KERN_WARNING
-			"NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else if (nmi_watchdog == NMI_IO_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_ioapic_nmi_watchdog();
-		else
-			disable_ioapic_nmi_watchdog();
-	} else {
-		printk(KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif /* CONFIG_SYSCTL */
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void __trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	backtrace_mask = cpu_online_map;
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpus_empty(backtrace_mask))
-			break;
-		mdelay(1);
-	}
-}
-- 
cgit v1.2.3


From 2a05180fe2e5b414f0cb2ccfc80e6c90563e3c67 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 20:35:16 +0100
Subject: x86, apic: move remaining APIC drivers to arch/x86/kernel/apic/*

Move the 32-bit extended-arch APIC drivers to arch/x86/kernel/apic/
too, and rename apic_64.c to probe_64.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile         |   6 +-
 arch/x86/kernel/apic/Makefile    |   9 +-
 arch/x86/kernel/apic/apic_64.c   |  89 -----
 arch/x86/kernel/apic/bigsmp_32.c | 274 ++++++++++++++
 arch/x86/kernel/apic/es7000_32.c | 757 +++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/apic/numaq_32.c  | 565 +++++++++++++++++++++++++++++
 arch/x86/kernel/apic/probe_32.c  | 424 ++++++++++++++++++++++
 arch/x86/kernel/apic/probe_64.c  |  89 +++++
 arch/x86/kernel/apic/summit_32.c | 601 +++++++++++++++++++++++++++++++
 arch/x86/kernel/bigsmp_32.c      | 274 --------------
 arch/x86/kernel/es7000_32.c      | 757 ---------------------------------------
 arch/x86/kernel/numaq_32.c       | 565 -----------------------------
 arch/x86/kernel/probe_32.c       | 424 ----------------------
 arch/x86/kernel/summit_32.c      | 601 -------------------------------
 14 files changed, 2718 insertions(+), 2717 deletions(-)
 delete mode 100644 arch/x86/kernel/apic/apic_64.c
 create mode 100644 arch/x86/kernel/apic/bigsmp_32.c
 create mode 100644 arch/x86/kernel/apic/es7000_32.c
 create mode 100644 arch/x86/kernel/apic/numaq_32.c
 create mode 100644 arch/x86/kernel/apic/probe_32.c
 create mode 100644 arch/x86/kernel/apic/probe_64.c
 create mode 100644 arch/x86/kernel/apic/summit_32.c
 delete mode 100644 arch/x86/kernel/bigsmp_32.c
 delete mode 100644 arch/x86/kernel/es7000_32.c
 delete mode 100644 arch/x86/kernel/numaq_32.c
 delete mode 100644 arch/x86/kernel/probe_32.c
 delete mode 100644 arch/x86/kernel/summit_32.c

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9139ff69471..c70537d8c15 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -30,7 +30,7 @@ obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o dumpstack.o
 obj-y			+= setup.o i8259.o irqinit_$(BITS).o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
-obj-$(CONFIG_X86_32)	+= probe_32.o probe_roms_32.o
+obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
@@ -70,10 +70,6 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
-obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
-obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
-obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
-obj-$(CONFIG_X86_SUMMIT)	+= summit_32.o
 obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_MODULES)		+= module_$(BITS).o
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index da20b70c400..97f558db5c3 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -2,14 +2,19 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-y				:= apic.o ipi.o nmi.o
+obj-y				:= apic.o probe_$(BITS).o ipi.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
+obj-$
 
 ifeq ($(CONFIG_X86_64),y)
-obj-y				+= apic_64.o apic_flat_64.o
+obj-y				+= apic_flat_64.o
 obj-$(CONFIG_X86_X2APIC)	+= x2apic_cluster.o
 obj-$(CONFIG_X86_X2APIC)	+= x2apic_phys.o
 obj-$(CONFIG_X86_UV)		+= x2apic_uv_x.o
 endif
 
+obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
+obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
+obj-$(CONFIG_X86_SUMMIT)	+= summit_32.o
diff --git a/arch/x86/kernel/apic/apic_64.c b/arch/x86/kernel/apic/apic_64.c
deleted file mode 100644
index 70935dd904d..00000000000
--- a/arch/x86/kernel/apic/apic_64.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch probe layer.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/hardirq.h>
-#include <linux/dmar.h>
-
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-#include <asm/setup.h>
-
-extern struct apic apic_flat;
-extern struct apic apic_physflat;
-extern struct apic apic_x2xpic_uv_x;
-extern struct apic apic_x2apic_phys;
-extern struct apic apic_x2apic_cluster;
-
-struct apic __read_mostly *apic = &apic_flat;
-EXPORT_SYMBOL_GPL(apic);
-
-static struct apic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_UV
-	&apic_x2apic_uv_x,
-#endif
-#ifdef CONFIG_X86_X2APIC
-	&apic_x2apic_phys,
-	&apic_x2apic_cluster,
-#endif
-	&apic_physflat,
-	NULL,
-};
-
-/*
- * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
- */
-void __init default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_X2APIC
-	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
-		if (!intr_remapping_enabled)
-			apic = &apic_flat;
-	}
-#endif
-
-	if (apic == &apic_flat) {
-		if (max_physical_apicid >= 8)
-			apic = &apic_physflat;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
-	}
-
-	if (x86_quirks->update_apic)
-		x86_quirks->update_apic();
-}
-
-/* Same for both flat and physical. */
-
-void apic_send_IPI_self(int vector)
-{
-	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
-}
-
-int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	int i;
-
-	for (i = 0; apic_probe[i]; ++i) {
-		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
-			apic = apic_probe[i];
-			printk(KERN_INFO "Setting APIC routing to %s.\n",
-				apic->name);
-			return 1;
-		}
-	}
-	return 0;
-}
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
new file mode 100644
index 00000000000..0b1093394fd
--- /dev/null
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -0,0 +1,274 @@
+/*
+ * APIC driver for "bigsmp" xAPIC machines with more than 8 virtual CPUs.
+ *
+ * Drives the local APIC in "clustered mode".
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/smp.h>
+
+#include <asm/apicdef.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+
+static inline unsigned bigsmp_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+static inline int bigsmp_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline const cpumask_t *bigsmp_target_cpus(void)
+{
+#ifdef CONFIG_SMP
+	return &cpu_online_map;
+#else
+	return &cpumask_of_cpu(0);
+#endif
+}
+
+static inline unsigned long
+bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+static inline unsigned long bigsmp_check_apicid_present(int bit)
+{
+	return 1;
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+	unsigned long val, id;
+
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	id = per_cpu(x86_bios_cpu_apicid, cpu);
+	val |= SET_APIC_LOGICAL_ID(id);
+
+	return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void bigsmp_init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_FLAT);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static inline void bigsmp_setup_apic_routing(void)
+{
+	printk(KERN_INFO
+		"Enabling APIC mode:  Physflat.  Using %d I/O APICs\n",
+		nr_ioapics);
+}
+
+static inline int bigsmp_apicid_to_node(int logical_apicid)
+{
+	return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids)
+		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+	return BAD_APICID;
+}
+
+static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int bigsmp_cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xFFL);
+}
+
+static inline void bigsmp_setup_portio_remap(void)
+{
+}
+
+static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
+}
+
+static inline unsigned int
+bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			      const struct cpumask *andmask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	for_each_cpu_and(cpu, cpumask, andmask) {
+		if (cpumask_test_cpu(cpu, cpu_online_mask))
+			break;
+	}
+	if (cpu < nr_cpu_ids)
+		return bigsmp_cpu_to_logical_apicid(cpu);
+
+	return BAD_APICID;
+}
+
+static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence_phys(mask, vector);
+}
+
+static inline void bigsmp_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
+}
+
+static inline void bigsmp_send_IPI_all(int vector)
+{
+	bigsmp_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int dmi_bigsmp; /* can be set by dmi scanners */
+
+static int hp_ht_bigsmp(const struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+	dmi_bigsmp = 1;
+
+	return 0;
+}
+
+
+static const struct dmi_system_id bigsmp_dmi_table[] = {
+	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+			DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
+		}
+	},
+
+	{ hp_ht_bigsmp, "HP ProLiant DL740",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+			DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+		}
+	},
+	{ } /* NULL entry stops DMI scanning */
+};
+
+static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	cpus_clear(*retmask);
+	cpu_set(cpu, *retmask);
+}
+
+static int probe_bigsmp(void)
+{
+	if (def_to_bigsmp)
+		dmi_bigsmp = 1;
+	else
+		dmi_check_system(bigsmp_dmi_table);
+
+	return dmi_bigsmp;
+}
+
+struct apic apic_bigsmp = {
+
+	.name				= "bigsmp",
+	.probe				= probe_bigsmp,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= bigsmp_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	/* phys delivery to target CPU: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= bigsmp_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= 0,
+	.check_apicid_used		= bigsmp_check_apicid_used,
+	.check_apicid_present		= bigsmp_check_apicid_present,
+
+	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
+	.init_apic_ldr			= bigsmp_init_apic_ldr,
+
+	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
+	.setup_apic_routing		= bigsmp_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= bigsmp_apicid_to_node,
+	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= bigsmp_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= bigsmp_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= bigsmp_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
+	.send_IPI_all			= bigsmp_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
new file mode 100644
index 00000000000..320f2d2e4e5
--- /dev/null
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -0,0 +1,757 @@
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ *             Natalie Protasevich, Unisys Corporation
+ *
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation.
+ * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
+ *
+ *   All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/apicdef.h>
+#include <asm/atomic.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS			0
+#define ES7000_CLASSIC			1
+#define ES7000_ZORRO			2
+
+#define	MIP_REG				1
+#define	MIP_PSAI_REG			4
+
+#define	MIP_BUSY			1
+#define	MIP_SPIN			0xf0000
+#define	MIP_VALID			0x0100000000000000ULL
+#define	MIP_SW_APIC			0x1020b
+
+#define	MIP_PORT(val)			((val >> 32) & 0xffff)
+
+#define	MIP_RD_LO(val)			(val & 0xffffffff)
+
+struct mip_reg {
+	unsigned long long		off_0x00;
+	unsigned long long		off_0x08;
+	unsigned long long		off_0x10;
+	unsigned long long		off_0x18;
+	unsigned long long		off_0x20;
+	unsigned long long		off_0x28;
+	unsigned long long		off_0x30;
+	unsigned long long		off_0x38;
+};
+
+struct mip_reg_info {
+	unsigned long long		mip_info;
+	unsigned long long		delivery_info;
+	unsigned long long		host_reg;
+	unsigned long long		mip_reg;
+};
+
+struct psai {
+	unsigned long long		entry_type;
+	unsigned long long		addr;
+	unsigned long long		bep_addr;
+};
+
+#ifdef CONFIG_ACPI
+
+struct es7000_oem_table {
+	struct acpi_table_header	Header;
+	u32				OEMTableAddr;
+	u32				OEMTableSize;
+};
+
+static unsigned long			oem_addrX;
+static unsigned long			oem_size;
+
+#endif
+
+/*
+ * ES7000 Globals
+ */
+
+static volatile unsigned long		*psai;
+static struct mip_reg			*mip_reg;
+static struct mip_reg			*host_reg;
+static int 				mip_port;
+static unsigned long			mip_addr;
+static unsigned long			host_addr;
+
+int					es7000_plat;
+
+/*
+ * GSI override for ES7000 platforms.
+ */
+
+static unsigned int			base;
+
+static int
+es7000_rename_gsi(int ioapic, int gsi)
+{
+	if (es7000_plat == ES7000_ZORRO)
+		return gsi;
+
+	if (!base) {
+		int i;
+		for (i = 0; i < nr_ioapics; i++)
+			base += nr_ioapic_registers[i];
+	}
+
+	if (!ioapic && (gsi < 16))
+		gsi += base;
+
+	return gsi;
+}
+
+static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
+{
+	unsigned long vect = 0, psaival = 0;
+
+	if (psai == NULL)
+		return -1;
+
+	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+	psaival = (0x1000000 | vect | cpu);
+
+	while (*psai & 0x1000000)
+		;
+
+	*psai = psaival;
+
+	return 0;
+}
+
+static int __init es7000_update_apic(void)
+{
+	apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
+
+	/* MPENTIUMIII */
+	if (boot_cpu_data.x86 == 6 &&
+	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) {
+		es7000_update_apic_to_cluster();
+		apic->wait_for_init_deassert = NULL;
+		apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
+	}
+
+	return 0;
+}
+
+static void __init setup_unisys(void)
+{
+	/*
+	 * Determine the generation of the ES7000 currently running.
+	 *
+	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
+	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
+	 *
+	 */
+	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
+		es7000_plat = ES7000_ZORRO;
+	else
+		es7000_plat = ES7000_CLASSIC;
+	ioapic_renumber_irq = es7000_rename_gsi;
+
+	x86_quirks->update_apic = es7000_update_apic;
+}
+
+/*
+ * Parse the OEM Table:
+ */
+static int __init parse_unisys_oem(char *oemptr)
+{
+	int			i;
+	int 			success = 0;
+	unsigned char		type, size;
+	unsigned long		val;
+	char			*tp = NULL;
+	struct psai		*psaip = NULL;
+	struct mip_reg_info 	*mi;
+	struct mip_reg		*host, *mip;
+
+	tp = oemptr;
+
+	tp += 8;
+
+	for (i = 0; i <= 6; i++) {
+		type = *tp++;
+		size = *tp++;
+		tp -= 2;
+		switch (type) {
+		case MIP_REG:
+			mi = (struct mip_reg_info *)tp;
+			val = MIP_RD_LO(mi->host_reg);
+			host_addr = val;
+			host = (struct mip_reg *)val;
+			host_reg = __va(host);
+			val = MIP_RD_LO(mi->mip_reg);
+			mip_port = MIP_PORT(mi->mip_info);
+			mip_addr = val;
+			mip = (struct mip_reg *)val;
+			mip_reg = __va(mip);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
+			success++;
+			break;
+		case MIP_PSAI_REG:
+			psaip = (struct psai *)tp;
+			if (tp != NULL) {
+				if (psaip->addr)
+					psai = __va(psaip->addr);
+				else
+					psai = NULL;
+				success++;
+			}
+			break;
+		default:
+			break;
+		}
+		tp += size;
+	}
+
+	if (success < 2)
+		es7000_plat = NON_UNISYS;
+	else
+		setup_unisys();
+
+	return es7000_plat;
+}
+
+#ifdef CONFIG_ACPI
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
+{
+	struct acpi_table_header *header = NULL;
+	struct es7000_oem_table *table;
+	acpi_size tbl_size;
+	acpi_status ret;
+	int i = 0;
+
+	for (;;) {
+		ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size);
+		if (!ACPI_SUCCESS(ret))
+			return -1;
+
+		if (!memcmp((char *) &header->oem_id, "UNISYS", 6))
+			break;
+
+		early_acpi_os_unmap_memory(header, tbl_size);
+	}
+
+	table = (void *)header;
+
+	oem_addrX	= table->OEMTableAddr;
+	oem_size	= table->OEMTableSize;
+
+	early_acpi_os_unmap_memory(header, tbl_size);
+
+	*oem_addr	= (unsigned long)__acpi_map_table(oem_addrX, oem_size);
+
+	return 0;
+}
+
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+{
+	if (!oem_addr)
+		return;
+
+	__acpi_unmap_table((char *)oem_addr, oem_size);
+}
+
+static int es7000_check_dsdt(void)
+{
+	struct acpi_table_header header;
+
+	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+	    !strncmp(header.oem_id, "UNISYS", 6))
+		return 1;
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	unsigned long oem_addr = 0;
+	int check_dsdt;
+	int ret = 0;
+
+	/* check dsdt at first to avoid clear fix_map for oem_addr */
+	check_dsdt = es7000_check_dsdt();
+
+	if (!find_unisys_acpi_oem_table(&oem_addr)) {
+		if (check_dsdt) {
+			ret = parse_unisys_oem((char *)oem_addr);
+		} else {
+			setup_unisys();
+			ret = 1;
+		}
+		/*
+		 * we need to unmap it
+		 */
+		unmap_unisys_acpi_oem_table(oem_addr);
+	}
+	return ret;
+}
+#else /* !CONFIG_ACPI: */
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+#endif /* !CONFIG_ACPI */
+
+static void es7000_spin(int n)
+{
+	int i = 0;
+
+	while (i++ < n)
+		rep_nop();
+}
+
+static int __init
+es7000_mip_write(struct mip_reg *mip_reg)
+{
+	int status = 0;
+	int spin;
+
+	spin = MIP_SPIN;
+	while ((host_reg->off_0x38 & MIP_VALID) != 0) {
+		if (--spin <= 0) {
+			WARN(1,	"Timeout waiting for Host Valid Flag\n");
+			return -1;
+		}
+		es7000_spin(MIP_SPIN);
+	}
+
+	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
+	outb(1, mip_port);
+
+	spin = MIP_SPIN;
+
+	while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
+		if (--spin <= 0) {
+			WARN(1,	"Timeout waiting for MIP Valid Flag\n");
+			return -1;
+		}
+		es7000_spin(MIP_SPIN);
+	}
+
+	status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48;
+	mip_reg->off_0x38 &= ~MIP_VALID;
+
+	return status;
+}
+
+static void __init es7000_enable_apic_mode(void)
+{
+	struct mip_reg es7000_mip_reg;
+	int mip_status;
+
+	if (!es7000_plat)
+		return;
+
+	printk(KERN_INFO "ES7000: Enabling APIC mode.\n");
+	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
+	es7000_mip_reg.off_0x38 = MIP_VALID;
+
+	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+		WARN(1, "Command failed, status = %x\n", mip_status);
+}
+
+static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+
+static void es7000_wait_for_init_deassert(atomic_t *deassert)
+{
+#ifndef CONFIG_ES7000_CLUSTERED_APIC
+	while (!atomic_read(deassert))
+		cpu_relax();
+#endif
+	return;
+}
+
+static unsigned int es7000_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence_phys(mask, vector);
+}
+
+static void es7000_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
+}
+
+static void es7000_send_IPI_all(int vector)
+{
+	es7000_send_IPI_mask(cpu_online_mask, vector);
+}
+
+static int es7000_apic_id_registered(void)
+{
+	return 1;
+}
+
+static const cpumask_t *target_cpus_cluster(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static const cpumask_t *es7000_target_cpus(void)
+{
+	return &cpumask_of_cpu(smp_processor_id());
+}
+
+static unsigned long
+es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+static unsigned long es7000_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static unsigned long calculate_ldr(int cpu)
+{
+	unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu);
+
+	return SET_APIC_LOGICAL_ID(id);
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static void es7000_init_apic_ldr_cluster(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_CLUSTER);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static void es7000_init_apic_ldr(void)
+{
+	unsigned long val;
+	int cpu = smp_processor_id();
+
+	apic_write(APIC_DFR, APIC_DFR_FLAT);
+	val = calculate_ldr(cpu);
+	apic_write(APIC_LDR, val);
+}
+
+static void es7000_setup_apic_routing(void)
+{
+	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+
+	printk(KERN_INFO
+	  "Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+		(apic_version[apic] == 0x14) ?
+			"Physical Cluster" : "Logical Cluster",
+		nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
+}
+
+static int es7000_apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+
+static int es7000_cpu_present_to_apicid(int mps_cpu)
+{
+	if (!mps_cpu)
+		return boot_cpu_physical_apicid;
+	else if (mps_cpu < nr_cpu_ids)
+		return per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static int cpu_id;
+
+static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
+{
+	physid_mask_t mask;
+
+	mask = physid_mask_of_physid(cpu_id);
+	++cpu_id;
+
+	return mask;
+}
+
+/* Mapping from cpu number to logical apicid */
+static int es7000_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0xff);
+}
+
+static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
+{
+	boot_cpu_physical_apicid = read_apic_id();
+	return 1;
+}
+
+static unsigned int
+es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpumask_weight(cpumask);
+	/* Return id to all */
+	if (num_bits_set == nr_cpu_ids)
+		return 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = cpumask_first(cpumask);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
+
+	while (cpus_found < num_bits_set) {
+		if (cpumask_test_cpu(cpu, cpumask)) {
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
+				WARN(1, "Not a valid mask!");
+
+				return 0xFF;
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpus_weight(*cpumask);
+	/* Return id to all */
+	if (num_bits_set == nr_cpu_ids)
+		return es7000_cpu_to_logical_apicid(0);
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = first_cpu(*cpumask);
+	apicid = es7000_cpu_to_logical_apicid(cpu);
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, *cpumask)) {
+			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
+				printk("%s: Not a valid mask!\n", __func__);
+
+				return es7000_cpu_to_logical_apicid(0);
+			}
+			apicid = new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static unsigned int
+es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
+{
+	int apicid = es7000_cpu_to_logical_apicid(0);
+	cpumask_var_t cpumask;
+
+	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+		return apicid;
+
+	cpumask_and(cpumask, inmask, andmask);
+	cpumask_and(cpumask, cpumask, cpu_online_mask);
+	apicid = es7000_cpu_mask_to_apicid(cpumask);
+
+	free_cpumask_var(cpumask);
+
+	return apicid;
+}
+
+static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+void __init es7000_update_apic_to_cluster(void)
+{
+	apic->target_cpus = target_cpus_cluster;
+	apic->irq_delivery_mode = dest_LowestPrio;
+	/* logical delivery broadcast to all procs: */
+	apic->irq_dest_mode = 1;
+
+	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
+
+	apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster;
+}
+
+static int probe_es7000(void)
+{
+	/* probed later in mptable/ACPI hooks */
+	return 0;
+}
+
+static __init int
+es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (mpc->oemptr) {
+		struct mpc_oemtable *oem_table =
+			(struct mpc_oemtable *)mpc->oemptr;
+
+		if (!strncmp(oem, "UNISYS", 6))
+			return parse_unisys_oem((char *)oem_table);
+	}
+	return 0;
+}
+
+
+struct apic apic_es7000 = {
+
+	.name				= "es7000",
+	.probe				= probe_es7000,
+	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
+	.apic_id_registered		= es7000_apic_id_registered,
+
+	.irq_delivery_mode		= dest_Fixed,
+	/* phys delivery to target CPUs: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= es7000_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= 0,
+	.check_apicid_used		= es7000_check_apicid_used,
+	.check_apicid_present		= es7000_check_apicid_present,
+
+	.vector_allocation_domain	= es7000_vector_allocation_domain,
+	.init_apic_ldr			= es7000_init_apic_ldr,
+
+	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
+	.setup_apic_routing		= es7000_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= es7000_apicid_to_node,
+	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
+	.enable_apic_mode		= es7000_enable_apic_mode,
+	.phys_pkg_id			= es7000_phys_pkg_id,
+	.mps_oem_check			= es7000_mps_oem_check,
+
+	.get_apic_id			= es7000_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= es7000_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
+	.send_IPI_all			= es7000_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+
+	.trampoline_phys_low		= 0x467,
+	.trampoline_phys_high		= 0x469,
+
+	.wait_for_init_deassert		= es7000_wait_for_init_deassert,
+
+	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
new file mode 100644
index 00000000000..d9d6d61eed8
--- /dev/null
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -0,0 +1,565 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+#include <linux/nodemask.h>
+#include <linux/topology.h>
+#include <linux/bootmem.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/numaq.h>
+#include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/ipi.h>
+
+#define	MB_TO_PAGES(addr)		((addr) << (20 - PAGE_SHIFT))
+
+int found_numaq;
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_trans {
+	unsigned char			mpc_type;
+	unsigned char			trans_len;
+	unsigned char			trans_type;
+	unsigned char			trans_quad;
+	unsigned char			trans_global;
+	unsigned char			trans_local;
+	unsigned short			trans_reserved;
+};
+
+/* x86_quirks member */
+static int				mpc_record;
+
+static __cpuinitdata struct mpc_trans	*translation_table[MAX_MPC_ENTRY];
+
+int					mp_bus_id_to_node[MAX_MP_BUSSES];
+int					mp_bus_id_to_local[MAX_MP_BUSSES];
+int					quad_local_to_mp_bus_id[NR_CPUS/4][4];
+
+
+static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
+{
+	struct eachquadmem *eq = scd->eq + node;
+
+	node_set_online(node);
+
+	/* Convert to pages */
+	node_start_pfn[node] =
+		 MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
+
+	node_end_pfn[node] =
+		 MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+
+	e820_register_active_regions(node, node_start_pfn[node],
+						node_end_pfn[node]);
+
+	memory_present(node, node_start_pfn[node], node_end_pfn[node]);
+
+	node_remap_size[node] = node_memmap_size_bytes(node,
+					node_start_pfn[node],
+					node_end_pfn[node]);
+}
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table.  This
+ * function also updates node_online_map with the nodes (quads) present.
+ */
+static void __init smp_dump_qct(void)
+{
+	struct sys_cfg_data *scd;
+	int node;
+
+	scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+	nodes_clear(node_online_map);
+	for_each_node(node) {
+		if (scd->quads_present31_0 & (1 << node))
+			numaq_register_node(node, scd);
+	}
+}
+
+void __cpuinit numaq_tsc_disable(void)
+{
+	if (!found_numaq)
+		return;
+
+	if (num_online_nodes() > 1) {
+		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+		setup_clear_cpu_cap(X86_FEATURE_TSC);
+	}
+}
+
+static int __init numaq_pre_time_init(void)
+{
+	numaq_tsc_disable();
+	return 0;
+}
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_cpu *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->apicid);
+
+	printk(KERN_DEBUG
+		"Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+		 m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
+		(m->cpufeature & CPU_MODEL_MASK) >> 4,
+		 m->apicver, quad, logical_apicid);
+
+	return logical_apicid;
+}
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	mp_bus_id_to_node[m->busid] = quad;
+	mp_bus_id_to_local[m->busid] = local;
+
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
+}
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_bus *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->busid;
+}
+
+static void __init MP_translation_info(struct mpc_trans *m)
+{
+	printk(KERN_INFO
+	    "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+	       m->trans_local);
+
+	if (mpc_record >= MAX_MPC_ENTRY)
+		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+	else
+		translation_table[mpc_record] = m; /* stash this for later */
+
+	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+		node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+static void __init
+ smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
+{
+	int count = sizeof(*oemtable);	/* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+	mpc_record = 0;
+	printk(KERN_INFO
+		"Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+
+	if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
+		printk(KERN_WARNING
+		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+		       oemtable->signature[0], oemtable->signature[1],
+		       oemtable->signature[2], oemtable->signature[3]);
+		return;
+	}
+
+	if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
+		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+		return;
+	}
+
+	while (count < oemtable->length) {
+		switch (*oemptr) {
+		case MP_TRANSLATION:
+			{
+				struct mpc_trans *m = (void *)oemptr;
+
+				MP_translation_info(m);
+				oemptr += sizeof(*m);
+				count += sizeof(*m);
+				++mpc_record;
+				break;
+			}
+		default:
+			printk(KERN_WARNING
+			       "Unrecognised OEM table entry type! - %d\n",
+			       (int)*oemptr);
+			return;
+		}
+	}
+}
+
+static int __init numaq_setup_ioapic_ids(void)
+{
+	/* so can skip it */
+	return 1;
+}
+
+static int __init numaq_update_apic(void)
+{
+	apic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;
+
+	return 0;
+}
+
+static struct x86_quirks numaq_x86_quirks __initdata = {
+	.arch_pre_time_init		= numaq_pre_time_init,
+	.arch_time_init			= NULL,
+	.arch_pre_intr_init		= NULL,
+	.arch_memory_setup		= NULL,
+	.arch_intr_init			= NULL,
+	.arch_trap_init			= NULL,
+	.mach_get_smp_config		= NULL,
+	.mach_find_smp_config		= NULL,
+	.mpc_record			= &mpc_record,
+	.mpc_apic_id			= mpc_apic_id,
+	.mpc_oem_bus_info		= mpc_oem_bus_info,
+	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
+	.smp_read_mpc_oem		= smp_read_mpc_oem,
+	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
+	.update_apic			= numaq_update_apic,
+};
+
+static __init void early_check_numaq(void)
+{
+	/*
+	 * Find possible boot-time SMP configuration:
+	 */
+	early_find_smp_config();
+
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	if (smp_found_config)
+		early_get_smp_config();
+
+	if (found_numaq)
+		x86_quirks = &numaq_x86_quirks;
+}
+
+int __init get_memcfg_numaq(void)
+{
+	early_check_numaq();
+	if (!found_numaq)
+		return 0;
+	smp_dump_qct();
+
+	return 1;
+}
+
+#define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline unsigned int numaq_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0x0F;
+}
+
+static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
+{
+	default_send_IPI_mask_sequence_logical(mask, vector);
+}
+
+static inline void numaq_send_IPI_allbutself(int vector)
+{
+	default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
+}
+
+static inline void numaq_send_IPI_all(int vector)
+{
+	numaq_send_IPI_mask(cpu_online_mask, vector);
+}
+
+#define NUMAQ_TRAMPOLINE_PHYS_LOW	(0x8)
+#define NUMAQ_TRAMPOLINE_PHYS_HIGH	(0xa)
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
+ */
+static inline void numaq_smp_callin_clear_local_apic(void)
+{
+	clear_local_APIC();
+}
+
+static inline const cpumask_t *numaq_target_cpus(void)
+{
+	return &CPU_MASK_ALL;
+}
+
+static inline unsigned long
+numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long numaq_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static inline int numaq_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void numaq_init_apic_ldr(void)
+{
+	/* Already done in NUMA-Q firmware */
+}
+
+static inline void numaq_setup_apic_routing(void)
+{
+	printk(KERN_INFO
+		"Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
+		nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int numaq_multi_timer_check(int apic, int irq)
+{
+	return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	/* We don't have a good way to do this yet - hack */
+	return physids_promote(0xFUL);
+}
+
+static inline int numaq_cpu_to_logical_apicid(int cpu)
+{
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int numaq_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < 60)
+		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+	else
+		return BAD_APICID;
+}
+
+static inline int numaq_apicid_to_node(int logical_apicid)
+{
+	return logical_apicid >> 4;
+}
+
+static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
+{
+	int node = numaq_apicid_to_node(logical_apicid);
+	int cpu = __ffs(logical_apicid & 0xf);
+
+	return physid_mask_of_physid(cpu + 4*node);
+}
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+
+static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	return 0x0F;
+}
+
+static inline unsigned int
+numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+			     const struct cpumask *andmask)
+{
+	return 0x0F;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+static int
+numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+
+	return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+	/* already know from get_memcfg_numaq() */
+	return found_numaq;
+}
+
+static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+static void numaq_setup_portio_remap(void)
+{
+	int num_quads = num_online_nodes();
+
+	if (num_quads <= 1)
+		return;
+
+	printk(KERN_INFO
+		"Remapping cross-quad port I/O for %d quads\n", num_quads);
+
+	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+
+	printk(KERN_INFO
+		"xquad_portio vaddr 0x%08lx, len %08lx\n",
+		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+struct apic apic_numaq = {
+
+	.name				= "NUMAQ",
+	.probe				= probe_numaq,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= numaq_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* physical delivery on LOCAL quad: */
+	.irq_dest_mode			= 0,
+
+	.target_cpus			= numaq_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= numaq_check_apicid_used,
+	.check_apicid_present		= numaq_check_apicid_present,
+
+	.vector_allocation_domain	= numaq_vector_allocation_domain,
+	.init_apic_ldr			= numaq_init_apic_ldr,
+
+	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
+	.setup_apic_routing		= numaq_setup_apic_routing,
+	.multi_timer_check		= numaq_multi_timer_check,
+	.apicid_to_node			= numaq_apicid_to_node,
+	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
+	.setup_portio_remap		= numaq_setup_portio_remap,
+	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= numaq_phys_pkg_id,
+	.mps_oem_check			= numaq_mps_oem_check,
+
+	.get_apic_id			= numaq_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= numaq_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
+	.send_IPI_all			= numaq_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
+
+	/* We don't do anything here because we use NMI's to boot instead */
+	.wait_for_init_deassert		= NULL,
+
+	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
+	.inquire_remote_apic		= NULL,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
new file mode 100644
index 00000000000..5fa48332c5c
--- /dev/null
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -0,0 +1,424 @@
+/*
+ * Default generic APIC driver. This handles up to 8 CPUs.
+ *
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic x86 APIC driver probe layer.
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/ipi.h>
+
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+#include <asm/e820.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define DEFAULT_SEND_IPI	(1)
+#else
+#define DEFAULT_SEND_IPI	(0)
+#endif
+
+int no_broadcast = DEFAULT_SEND_IPI;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+void default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	printk(KERN_INFO
+		"Enabling APIC mode:  Flat.  Using %d I/O APICs\n",
+		nr_ioapics);
+#endif
+}
+
+static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	/*
+	 * Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
+}
+
+/* should be called last. */
+static int probe_default(void)
+{
+	return 1;
+}
+
+struct apic apic_default = {
+
+	.name				= "default",
+	.probe				= probe_default,
+	.acpi_madt_oem_check		= NULL,
+	.apic_id_registered		= default_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= default_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= default_check_apicid_used,
+	.check_apicid_present		= default_check_apicid_present,
+
+	.vector_allocation_domain	= default_vector_allocation_domain,
+	.init_apic_ldr			= default_init_apic_ldr,
+
+	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
+	.setup_apic_routing		= default_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= default_apicid_to_node,
+	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= default_phys_pkg_id,
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= default_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= default_send_IPI_mask_logical,
+	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
+	.send_IPI_allbutself		= default_send_IPI_allbutself,
+	.send_IPI_all			= default_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
+
+extern struct apic apic_numaq;
+extern struct apic apic_summit;
+extern struct apic apic_bigsmp;
+extern struct apic apic_es7000;
+extern struct apic apic_default;
+
+struct apic *apic = &apic_default;
+EXPORT_SYMBOL_GPL(apic);
+
+static struct apic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
+	&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
+	&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
+	&apic_es7000,
+#endif
+	&apic_default,	/* must be last */
+	NULL,
+};
+
+static int cmdline_apic __initdata;
+static int __init parse_apic(char *arg)
+{
+	int i;
+
+	if (!arg)
+		return -EINVAL;
+
+	for (i = 0; apic_probe[i]; i++) {
+		if (!strcmp(apic_probe[i]->name, arg)) {
+			apic = apic_probe[i];
+			cmdline_apic = 1;
+			return 0;
+		}
+	}
+
+	if (x86_quirks->update_apic)
+		x86_quirks->update_apic();
+
+	/* Parsed again by __setup for debug/verbose */
+	return 0;
+}
+early_param("apic", parse_apic);
+
+void __init generic_bigsmp_probe(void)
+{
+#ifdef CONFIG_X86_BIGSMP
+	/*
+	 * This routine is used to switch to bigsmp mode when
+	 * - There is no apic= option specified by the user
+	 * - generic_apic_probe() has chosen apic_default as the sub_arch
+	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
+	 */
+
+	if (!cmdline_apic && apic == &apic_default) {
+		if (apic_bigsmp.probe()) {
+			apic = &apic_bigsmp;
+			if (x86_quirks->update_apic)
+				x86_quirks->update_apic();
+			printk(KERN_INFO "Overriding APIC driver with %s\n",
+			       apic->name);
+		}
+	}
+#endif
+}
+
+void __init generic_apic_probe(void)
+{
+	if (!cmdline_apic) {
+		int i;
+		for (i = 0; apic_probe[i]; i++) {
+			if (apic_probe[i]->probe()) {
+				apic = apic_probe[i];
+				break;
+			}
+		}
+		/* Not visible without early console */
+		if (!apic_probe[i])
+			panic("Didn't find an APIC driver");
+
+		if (x86_quirks->update_apic)
+			x86_quirks->update_apic();
+	}
+	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
+}
+
+/* These functions can switch the APIC even after the initial ->probe() */
+
+int __init
+generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (!apic_probe[i]->mps_oem_check)
+			continue;
+		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+			continue;
+
+		if (!cmdline_apic) {
+			apic = apic_probe[i];
+			if (x86_quirks->update_apic)
+				x86_quirks->update_apic();
+			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+			       apic->name);
+		}
+		return 1;
+	}
+	return 0;
+}
+
+int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (!apic_probe[i]->acpi_madt_oem_check)
+			continue;
+		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+			continue;
+
+		if (!cmdline_apic) {
+			apic = apic_probe[i];
+			if (x86_quirks->update_apic)
+				x86_quirks->update_apic();
+			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+			       apic->name);
+		}
+		return 1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *	Perform any necessary interrupt initialisation prior to setting up
+ *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *	interrupts should be initialised here if the machine emulates a PC
+ *	in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
+			return;
+	}
+	init_ISA_irqs();
+}
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ *	Fill in any interrupts that may have been left out by the general
+ *	init_IRQ() routine.  interrupts having to do with the machine rather
+ *	than the devices on the I/O bus (like APIC interrupts in intel MP
+ *	systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
+			return;
+	}
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ *	generally used to activate any machine specific identification
+ *	routines that may be needed before setup_arch() runs.  On Voyager
+ *	this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ *	Called as the final act of trap_init().  Used in VISWS to initialise
+ *	the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
+			return;
+	}
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.mask = CPU_MASK_NONE,
+	.name = "timer"
+};
+
+/**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ *	Must plug the system timer interrupt source at HZ into the IRQ listed
+ *	in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+	if (x86_quirks->arch_time_init) {
+		/*
+		 * A nonzero return code does not mean failure, it means
+		 * that the architecture quirk does not want any
+		 * generic (timer) setup to be performed after this:
+		 */
+		if (x86_quirks->arch_time_init())
+			return;
+	}
+
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
+ *	along the MCA bus.  Use this to hook into that chain if you will need
+ *	it.
+ **/
+void mca_nmi_hook(void)
+{
+	/*
+	 * If I recall correctly, there's a whole bunch of other things that
+	 * we can do to check for NMI problems, but that's all I know about
+	 * at the moment.
+	 */
+	pr_warning("NMI generated from unknown source!\n");
+}
+#endif
+
+static __init int no_ipi_broadcast(char *str)
+{
+	get_option(&str, &no_broadcast);
+	pr_info("Using %s mode\n",
+		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
+	return 1;
+}
+__setup("no_ipi_broadcast=", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+	pr_info("Using IPI %s mode\n",
+		no_broadcast ? "No-Shortcut" : "Shortcut");
+	return 0;
+}
+
+late_initcall(print_ipi_mode);
+
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
new file mode 100644
index 00000000000..70935dd904d
--- /dev/null
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2004 James Cleverdon, IBM.
+ * Subject to the GNU Public License, v.2
+ *
+ * Generic APIC sub-arch probe layer.
+ *
+ * Hacked for x86-64 by James Cleverdon from i386 architecture code by
+ * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
+ * James Cleverdon.
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/hardirq.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/setup.h>
+
+extern struct apic apic_flat;
+extern struct apic apic_physflat;
+extern struct apic apic_x2xpic_uv_x;
+extern struct apic apic_x2apic_phys;
+extern struct apic apic_x2apic_cluster;
+
+struct apic __read_mostly *apic = &apic_flat;
+EXPORT_SYMBOL_GPL(apic);
+
+static struct apic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_UV
+	&apic_x2apic_uv_x,
+#endif
+#ifdef CONFIG_X86_X2APIC
+	&apic_x2apic_phys,
+	&apic_x2apic_cluster,
+#endif
+	&apic_physflat,
+	NULL,
+};
+
+/*
+ * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
+ */
+void __init default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_X2APIC
+	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
+		if (!intr_remapping_enabled)
+			apic = &apic_flat;
+	}
+#endif
+
+	if (apic == &apic_flat) {
+		if (max_physical_apicid >= 8)
+			apic = &apic_physflat;
+		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+	}
+
+	if (x86_quirks->update_apic)
+		x86_quirks->update_apic();
+}
+
+/* Same for both flat and physical. */
+
+void apic_send_IPI_self(int vector)
+{
+	__default_send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
+}
+
+int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	int i;
+
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+			apic = apic_probe[i];
+			printk(KERN_INFO "Setting APIC routing to %s.\n",
+				apic->name);
+			return 1;
+		}
+	}
+	return 0;
+}
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
new file mode 100644
index 00000000000..cfe7b09015d
--- /dev/null
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -0,0 +1,601 @@
+/*
+ * IBM Summit-Specific Code
+ *
+ * Written By: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/bios_ebda.h>
+
+/*
+ * APIC driver for the IBM "Summit" chipset.
+ */
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <asm/smp.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <asm/ipi.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/smp.h>
+
+static inline unsigned summit_get_apic_id(unsigned long x)
+{
+	return (x >> 24) & 0xFF;
+}
+
+static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
+{
+	default_send_IPI_mask_sequence_logical(mask, vector);
+}
+
+static inline void summit_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		summit_send_IPI_mask(&mask, vector);
+}
+
+static inline void summit_send_IPI_all(int vector)
+{
+	summit_send_IPI_mask(&cpu_online_map, vector);
+}
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit()	{}
+#endif
+
+static inline int
+summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+{
+	if (!strncmp(oem, "IBM ENSW", 8) &&
+			(!strncmp(productid, "VIGIL SMP", 9)
+			 || !strncmp(productid, "EXA", 3)
+			 || !strncmp(productid, "RUTHLESS SMP", 12))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) &&
+	    (!strncmp(oem_table_id, "SERVIGIL", 8)
+	     || !strncmp(oem_table_id, "EXA", 3))){
+		mark_tsc_unstable("Summit based system");
+		use_cyclone = 1; /*enable cyclone-timer*/
+		setup_summit();
+		return 1;
+	}
+	return 0;
+}
+
+struct rio_table_hdr {
+	unsigned char version;      /* Version number of this data structure           */
+	                            /* Version 3 adds chassis_num & WP_index           */
+	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
+	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
+} __attribute__((packed));
+
+struct scal_detail {
+	unsigned char node_id;      /* Scalability Node ID                             */
+	unsigned long CBAR;         /* Address of 1MB register space                   */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
+	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
+} __attribute__((packed));
+
+struct rio_detail {
+	unsigned char node_id;      /* RIO Node ID                                     */
+	unsigned long BBAR;         /* Address of 1MB register space                   */
+	unsigned char type;         /* Type of device                                  */
+	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+	                            /* For CYC:  Node ID of Twister that owns this CYC */
+	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
+	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
+	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
+	                            /* For CYC:  0                                     */
+	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
+	                            /*                 = 0 : the XAPIC is not used, ie:*/
+	                            /*                     ints fwded to another XAPIC */
+	                            /*           Bits1:7 Reserved                      */
+	                            /* For CYC:  Bits0:7 Reserved                      */
+	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
+	                            /*           lower slot numbers/PCI bus numbers    */
+	                            /* For CYC:  No meaning                            */
+	unsigned char chassis_num;  /* 1 based Chassis number                          */
+	                            /* For LookOut WPEGs this field indicates the      */
+	                            /* Expansion Chassis #, enumerated from Boot       */
+	                            /* Node WPEG external port, then Boot Node CYC     */
+	                            /* external port, then Next Vigil chassis WPEG     */
+	                            /* external port, etc.                             */
+	                            /* Shared Lookouts have only 1 chassis number (the */
+	                            /* first one assigned)                             */
+} __attribute__((packed));
+
+
+typedef enum {
+	CompatTwister = 0,  /* Compatibility Twister               */
+	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
+	CompatCyclone = 2,  /* Compatibility Cyclone               */
+	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
+	CompatWPEG    = 4,  /* Compatibility WPEG                  */
+	AltWPEG       = 5,  /* Second Planar WPEG                  */
+	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
+	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT	4
+#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define SUMMIT_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+
+static inline const cpumask_t *summit_target_cpus(void)
+{
+	/* CPU_MASK_ALL (0xff) has undefined behaviour with
+	 * dest_LowestPrio mode logical clustered apic interrupt routing
+	 * Just start on cpu 0.  IRQ balancing will spread load
+	 */
+	return &cpumask_of_cpu(0);
+}
+
+static inline unsigned long
+summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long summit_check_apicid_present(int bit)
+{
+	return 1;
+}
+
+static inline void summit_init_apic_ldr(void)
+{
+	unsigned long val, id;
+	int count = 0;
+	u8 my_id = (u8)hard_smp_processor_id();
+	u8 my_cluster = APIC_CLUSTER(my_id);
+#ifdef CONFIG_SMP
+	u8 lid;
+	int i;
+
+	/* Create logical APIC IDs by counting CPUs already in cluster. */
+	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
+		lid = cpu_2_logical_apicid[i];
+		if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
+			++count;
+	}
+#endif
+	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
+	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+	id = my_cluster | (1UL << count);
+	apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(id);
+	apic_write(APIC_LDR, val);
+}
+
+static inline int summit_apic_id_registered(void)
+{
+	return 1;
+}
+
+static inline void summit_setup_apic_routing(void)
+{
+	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+						nr_ioapics);
+}
+
+static inline int summit_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+	return apicid_2_node[hard_smp_processor_id()];
+#else
+	return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int summit_cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (cpu >= nr_cpu_ids)
+		return BAD_APICID;
+	return cpu_2_logical_apicid[cpu];
+#else
+	return logical_smp_processor_id();
+#endif
+}
+
+static inline int summit_cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < nr_cpu_ids)
+		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t
+summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack */
+	return physids_promote(0x0F);
+}
+
+static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
+{
+	return physid_mask_of_physid(0);
+}
+
+static inline void summit_setup_portio_remap(void)
+{
+}
+
+static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return 1;
+}
+
+static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
+{
+	int cpus_found = 0;
+	int num_bits_set;
+	int apicid;
+	int cpu;
+
+	num_bits_set = cpus_weight(*cpumask);
+	/* Return id to all */
+	if (num_bits_set >= nr_cpu_ids)
+		return 0xFF;
+	/*
+	 * The cpus in the mask must all be on the apic cluster.  If are not
+	 * on the same apicid cluster return default value of target_cpus():
+	 */
+	cpu = first_cpu(*cpumask);
+	apicid = summit_cpu_to_logical_apicid(cpu);
+
+	while (cpus_found < num_bits_set) {
+		if (cpu_isset(cpu, *cpumask)) {
+			int new_apicid = summit_cpu_to_logical_apicid(cpu);
+
+			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
+				printk ("%s: Not a valid mask!\n", __func__);
+
+				return 0xFF;
+			}
+			apicid = apicid | new_apicid;
+			cpus_found++;
+		}
+		cpu++;
+	}
+	return apicid;
+}
+
+static inline unsigned int
+summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+			      const struct cpumask *andmask)
+{
+	int apicid = summit_cpu_to_logical_apicid(0);
+	cpumask_var_t cpumask;
+
+	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
+		return apicid;
+
+	cpumask_and(cpumask, inmask, andmask);
+	cpumask_and(cpumask, cpumask, cpu_online_mask);
+	apicid = summit_cpu_mask_to_apicid(cpumask);
+
+	free_cpumask_var(cpumask);
+
+	return apicid;
+}
+
+/*
+ * cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value.  For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
+static int probe_summit(void)
+{
+	/* probed later in mptable/ACPI hooks */
+	return 0;
+}
+
+static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
+{
+	/* Careful. Some cpus do not strictly honor the set of cpus
+	 * specified in the interrupt destination when using lowest
+	 * priority interrupt delivery mode.
+	 *
+	 * In particular there was a hyperthreading cpu observed to
+	 * deliver interrupts to the wrong hyperthread when only one
+	 * hyperthread was specified in the interrupt desitination.
+	 */
+	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
+}
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
+
+#ifndef CONFIG_X86_NUMAQ
+static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
+
+static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
+{
+	int twister = 0, node = 0;
+	int i, bus, num_buses;
+
+	for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+		if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
+			twister = rio_devs[i]->owner_id;
+			break;
+		}
+	}
+	if (i == rio_table_hdr->num_rio_dev) {
+		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
+		return last_bus;
+	}
+
+	for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
+		if (scal_devs[i]->node_id == twister) {
+			node = scal_devs[i]->node_id;
+			break;
+		}
+	}
+	if (i == rio_table_hdr->num_scal_dev) {
+		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
+		return last_bus;
+	}
+
+	switch (rio_devs[wpeg_num]->type) {
+	case CompatWPEG:
+		/*
+		 * The Compatibility Winnipeg controls the 2 legacy buses,
+		 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
+		 * a PCI-PCI bridge card is used in either slot: total 5 buses.
+		 */
+		num_buses = 5;
+		break;
+	case AltWPEG:
+		/*
+		 * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+		 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
+		 * the "extra" buses for each of those slots: total 7 buses.
+		 */
+		num_buses = 7;
+		break;
+	case LookOutAWPEG:
+	case LookOutBWPEG:
+		/*
+		 * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+		 * & the "extra" buses for each of those slots: total 9 buses.
+		 */
+		num_buses = 9;
+		break;
+	default:
+		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
+		return last_bus;
+	}
+
+	for (bus = last_bus; bus < last_bus + num_buses; bus++)
+		mp_bus_id_to_node[bus] = node;
+	return bus;
+}
+
+static int __init build_detail_arrays(void)
+{
+	unsigned long ptr;
+	int i, scal_detail_size, rio_detail_size;
+
+	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
+		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+		return 0;
+	}
+
+	switch (rio_table_hdr->version) {
+	default:
+		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
+		return 0;
+	case 2:
+		scal_detail_size = 11;
+		rio_detail_size = 13;
+		break;
+	case 3:
+		scal_detail_size = 12;
+		rio_detail_size = 15;
+		break;
+	}
+
+	ptr = (unsigned long)rio_table_hdr + 3;
+	for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+		scal_devs[i] = (struct scal_detail *)ptr;
+
+	for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+		rio_devs[i] = (struct rio_detail *)ptr;
+
+	return 1;
+}
+
+void __init setup_summit(void)
+{
+	unsigned long		ptr;
+	unsigned short		offset;
+	int			i, next_wpeg, next_bus = 0;
+
+	/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+	ptr = get_bios_ebda();
+	ptr = (unsigned long)phys_to_virt(ptr);
+
+	rio_table_hdr = NULL;
+	offset = 0x180;
+	while (offset) {
+		/* The block id is stored in the 2nd word */
+		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
+			/* set the pointer past the offset & block id */
+			rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+			break;
+		}
+		/* The next offset is stored in the 1st word.  0 means no more */
+		offset = *((unsigned short *)(ptr + offset));
+	}
+	if (!rio_table_hdr) {
+		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
+		return;
+	}
+
+	if (!build_detail_arrays())
+		return;
+
+	/* The first Winnipeg we're looking for has an index of 0 */
+	next_wpeg = 0;
+	do {
+		for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+			if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
+				/* It's the Winnipeg we're looking for! */
+				next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
+				next_wpeg++;
+				break;
+			}
+		}
+		/*
+		 * If we go through all Rio devices and don't find one with
+		 * the next index, it means we've found all the Winnipegs,
+		 * and thus all the PCI buses.
+		 */
+		if (i == rio_table_hdr->num_rio_dev)
+			next_wpeg = 0;
+	} while (next_wpeg != 0);
+}
+#endif
+
+struct apic apic_summit = {
+
+	.name				= "summit",
+	.probe				= probe_summit,
+	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
+	.apic_id_registered		= summit_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= summit_target_cpus,
+	.disable_esr			= 1,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= summit_check_apicid_used,
+	.check_apicid_present		= summit_check_apicid_present,
+
+	.vector_allocation_domain	= summit_vector_allocation_domain,
+	.init_apic_ldr			= summit_init_apic_ldr,
+
+	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
+	.setup_apic_routing		= summit_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= summit_apicid_to_node,
+	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= summit_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+	.phys_pkg_id			= summit_phys_pkg_id,
+	.mps_oem_check			= summit_mps_oem_check,
+
+	.get_apic_id			= summit_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= summit_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= summit_send_IPI_allbutself,
+	.send_IPI_all			= summit_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= NULL,
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= default_wait_for_init_deassert,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/bigsmp_32.c b/arch/x86/kernel/bigsmp_32.c
deleted file mode 100644
index 0b1093394fd..00000000000
--- a/arch/x86/kernel/bigsmp_32.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * APIC driver for "bigsmp" xAPIC machines with more than 8 virtual CPUs.
- *
- * Drives the local APIC in "clustered mode".
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/smp.h>
-
-#include <asm/apicdef.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-static inline unsigned bigsmp_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-static inline int bigsmp_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline const cpumask_t *bigsmp_target_cpus(void)
-{
-#ifdef CONFIG_SMP
-	return &cpu_online_map;
-#else
-	return &cpumask_of_cpu(0);
-#endif
-}
-
-static inline unsigned long
-bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-static inline unsigned long bigsmp_check_apicid_present(int bit)
-{
-	return 1;
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long val, id;
-
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = per_cpu(x86_bios_cpu_apicid, cpu);
-	val |= SET_APIC_LOGICAL_ID(id);
-
-	return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void bigsmp_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_FLAT);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void bigsmp_setup_apic_routing(void)
-{
-	printk(KERN_INFO
-		"Enabling APIC mode:  Physflat.  Using %d I/O APICs\n",
-		nr_ioapics);
-}
-
-static inline int bigsmp_apicid_to_node(int logical_apicid)
-{
-	return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
-	return BAD_APICID;
-}
-
-static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int bigsmp_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
-}
-
-static inline void bigsmp_setup_portio_remap(void)
-{
-}
-
-static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
-}
-
-static inline unsigned int
-bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			      const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-	if (cpu < nr_cpu_ids)
-		return bigsmp_cpu_to_logical_apicid(cpu);
-
-	return BAD_APICID;
-}
-
-static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence_phys(mask, vector);
-}
-
-static inline void bigsmp_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
-}
-
-static inline void bigsmp_send_IPI_all(int vector)
-{
-	bigsmp_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int dmi_bigsmp; /* can be set by dmi scanners */
-
-static int hp_ht_bigsmp(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
-	dmi_bigsmp = 1;
-
-	return 0;
-}
-
-
-static const struct dmi_system_id bigsmp_dmi_table[] = {
-	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
-		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-			DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
-		}
-	},
-
-	{ hp_ht_bigsmp, "HP ProLiant DL740",
-		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-			DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
-		}
-	},
-	{ } /* NULL entry stops DMI scanning */
-};
-
-static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	cpus_clear(*retmask);
-	cpu_set(cpu, *retmask);
-}
-
-static int probe_bigsmp(void)
-{
-	if (def_to_bigsmp)
-		dmi_bigsmp = 1;
-	else
-		dmi_check_system(bigsmp_dmi_table);
-
-	return dmi_bigsmp;
-}
-
-struct apic apic_bigsmp = {
-
-	.name				= "bigsmp",
-	.probe				= probe_bigsmp,
-	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= bigsmp_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	/* phys delivery to target CPU: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= bigsmp_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= 0,
-	.check_apicid_used		= bigsmp_check_apicid_used,
-	.check_apicid_present		= bigsmp_check_apicid_present,
-
-	.vector_allocation_domain	= bigsmp_vector_allocation_domain,
-	.init_apic_ldr			= bigsmp_init_apic_ldr,
-
-	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
-	.setup_apic_routing		= bigsmp_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= bigsmp_apicid_to_node,
-	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= bigsmp_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= bigsmp_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid		= bigsmp_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= bigsmp_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= bigsmp_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
-	.send_IPI_all			= bigsmp_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
diff --git a/arch/x86/kernel/es7000_32.c b/arch/x86/kernel/es7000_32.c
deleted file mode 100644
index 320f2d2e4e5..00000000000
--- a/arch/x86/kernel/es7000_32.c
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- *             Natalie Protasevich, Unisys Corporation
- *
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.
- * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
- *
- *   All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-#include <linux/notifier.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/nmi.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/apicdef.h>
-#include <asm/atomic.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS			0
-#define ES7000_CLASSIC			1
-#define ES7000_ZORRO			2
-
-#define	MIP_REG				1
-#define	MIP_PSAI_REG			4
-
-#define	MIP_BUSY			1
-#define	MIP_SPIN			0xf0000
-#define	MIP_VALID			0x0100000000000000ULL
-#define	MIP_SW_APIC			0x1020b
-
-#define	MIP_PORT(val)			((val >> 32) & 0xffff)
-
-#define	MIP_RD_LO(val)			(val & 0xffffffff)
-
-struct mip_reg {
-	unsigned long long		off_0x00;
-	unsigned long long		off_0x08;
-	unsigned long long		off_0x10;
-	unsigned long long		off_0x18;
-	unsigned long long		off_0x20;
-	unsigned long long		off_0x28;
-	unsigned long long		off_0x30;
-	unsigned long long		off_0x38;
-};
-
-struct mip_reg_info {
-	unsigned long long		mip_info;
-	unsigned long long		delivery_info;
-	unsigned long long		host_reg;
-	unsigned long long		mip_reg;
-};
-
-struct psai {
-	unsigned long long		entry_type;
-	unsigned long long		addr;
-	unsigned long long		bep_addr;
-};
-
-#ifdef CONFIG_ACPI
-
-struct es7000_oem_table {
-	struct acpi_table_header	Header;
-	u32				OEMTableAddr;
-	u32				OEMTableSize;
-};
-
-static unsigned long			oem_addrX;
-static unsigned long			oem_size;
-
-#endif
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long		*psai;
-static struct mip_reg			*mip_reg;
-static struct mip_reg			*host_reg;
-static int 				mip_port;
-static unsigned long			mip_addr;
-static unsigned long			host_addr;
-
-int					es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-static unsigned int			base;
-
-static int
-es7000_rename_gsi(int ioapic, int gsi)
-{
-	if (es7000_plat == ES7000_ZORRO)
-		return gsi;
-
-	if (!base) {
-		int i;
-		for (i = 0; i < nr_ioapics; i++)
-			base += nr_ioapic_registers[i];
-	}
-
-	if (!ioapic && (gsi < 16))
-		gsi += base;
-
-	return gsi;
-}
-
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
-{
-	unsigned long vect = 0, psaival = 0;
-
-	if (psai == NULL)
-		return -1;
-
-	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
-	psaival = (0x1000000 | vect | cpu);
-
-	while (*psai & 0x1000000)
-		;
-
-	*psai = psaival;
-
-	return 0;
-}
-
-static int __init es7000_update_apic(void)
-{
-	apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
-
-	/* MPENTIUMIII */
-	if (boot_cpu_data.x86 == 6 &&
-	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) {
-		es7000_update_apic_to_cluster();
-		apic->wait_for_init_deassert = NULL;
-		apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
-	}
-
-	return 0;
-}
-
-static void __init setup_unisys(void)
-{
-	/*
-	 * Determine the generation of the ES7000 currently running.
-	 *
-	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
-	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
-	 *
-	 */
-	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = ES7000_ZORRO;
-	else
-		es7000_plat = ES7000_CLASSIC;
-	ioapic_renumber_irq = es7000_rename_gsi;
-
-	x86_quirks->update_apic = es7000_update_apic;
-}
-
-/*
- * Parse the OEM Table:
- */
-static int __init parse_unisys_oem(char *oemptr)
-{
-	int			i;
-	int 			success = 0;
-	unsigned char		type, size;
-	unsigned long		val;
-	char			*tp = NULL;
-	struct psai		*psaip = NULL;
-	struct mip_reg_info 	*mi;
-	struct mip_reg		*host, *mip;
-
-	tp = oemptr;
-
-	tp += 8;
-
-	for (i = 0; i <= 6; i++) {
-		type = *tp++;
-		size = *tp++;
-		tp -= 2;
-		switch (type) {
-		case MIP_REG:
-			mi = (struct mip_reg_info *)tp;
-			val = MIP_RD_LO(mi->host_reg);
-			host_addr = val;
-			host = (struct mip_reg *)val;
-			host_reg = __va(host);
-			val = MIP_RD_LO(mi->mip_reg);
-			mip_port = MIP_PORT(mi->mip_info);
-			mip_addr = val;
-			mip = (struct mip_reg *)val;
-			mip_reg = __va(mip);
-			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
-				 (unsigned long)host_reg);
-			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
-				 (unsigned long)mip_reg);
-			success++;
-			break;
-		case MIP_PSAI_REG:
-			psaip = (struct psai *)tp;
-			if (tp != NULL) {
-				if (psaip->addr)
-					psai = __va(psaip->addr);
-				else
-					psai = NULL;
-				success++;
-			}
-			break;
-		default:
-			break;
-		}
-		tp += size;
-	}
-
-	if (success < 2)
-		es7000_plat = NON_UNISYS;
-	else
-		setup_unisys();
-
-	return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
-	struct acpi_table_header *header = NULL;
-	struct es7000_oem_table *table;
-	acpi_size tbl_size;
-	acpi_status ret;
-	int i = 0;
-
-	for (;;) {
-		ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size);
-		if (!ACPI_SUCCESS(ret))
-			return -1;
-
-		if (!memcmp((char *) &header->oem_id, "UNISYS", 6))
-			break;
-
-		early_acpi_os_unmap_memory(header, tbl_size);
-	}
-
-	table = (void *)header;
-
-	oem_addrX	= table->OEMTableAddr;
-	oem_size	= table->OEMTableSize;
-
-	early_acpi_os_unmap_memory(header, tbl_size);
-
-	*oem_addr	= (unsigned long)__acpi_map_table(oem_addrX, oem_size);
-
-	return 0;
-}
-
-static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
-{
-	if (!oem_addr)
-		return;
-
-	__acpi_unmap_table((char *)oem_addr, oem_size);
-}
-
-static int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	unsigned long oem_addr = 0;
-	int check_dsdt;
-	int ret = 0;
-
-	/* check dsdt at first to avoid clear fix_map for oem_addr */
-	check_dsdt = es7000_check_dsdt();
-
-	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (check_dsdt) {
-			ret = parse_unisys_oem((char *)oem_addr);
-		} else {
-			setup_unisys();
-			ret = 1;
-		}
-		/*
-		 * we need to unmap it
-		 */
-		unmap_unisys_acpi_oem_table(oem_addr);
-	}
-	return ret;
-}
-#else /* !CONFIG_ACPI: */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-#endif /* !CONFIG_ACPI */
-
-static void es7000_spin(int n)
-{
-	int i = 0;
-
-	while (i++ < n)
-		rep_nop();
-}
-
-static int __init
-es7000_mip_write(struct mip_reg *mip_reg)
-{
-	int status = 0;
-	int spin;
-
-	spin = MIP_SPIN;
-	while ((host_reg->off_0x38 & MIP_VALID) != 0) {
-		if (--spin <= 0) {
-			WARN(1,	"Timeout waiting for Host Valid Flag\n");
-			return -1;
-		}
-		es7000_spin(MIP_SPIN);
-	}
-
-	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
-	outb(1, mip_port);
-
-	spin = MIP_SPIN;
-
-	while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
-		if (--spin <= 0) {
-			WARN(1,	"Timeout waiting for MIP Valid Flag\n");
-			return -1;
-		}
-		es7000_spin(MIP_SPIN);
-	}
-
-	status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48;
-	mip_reg->off_0x38 &= ~MIP_VALID;
-
-	return status;
-}
-
-static void __init es7000_enable_apic_mode(void)
-{
-	struct mip_reg es7000_mip_reg;
-	int mip_status;
-
-	if (!es7000_plat)
-		return;
-
-	printk(KERN_INFO "ES7000: Enabling APIC mode.\n");
-	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
-	es7000_mip_reg.off_0x38 = MIP_VALID;
-
-	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
-		WARN(1, "Command failed, status = %x\n", mip_status);
-}
-
-static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-
-static void es7000_wait_for_init_deassert(atomic_t *deassert)
-{
-#ifndef CONFIG_ES7000_CLUSTERED_APIC
-	while (!atomic_read(deassert))
-		cpu_relax();
-#endif
-	return;
-}
-
-static unsigned int es7000_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence_phys(mask, vector);
-}
-
-static void es7000_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
-}
-
-static void es7000_send_IPI_all(int vector)
-{
-	es7000_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int es7000_apic_id_registered(void)
-{
-	return 1;
-}
-
-static const cpumask_t *target_cpus_cluster(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static const cpumask_t *es7000_target_cpus(void)
-{
-	return &cpumask_of_cpu(smp_processor_id());
-}
-
-static unsigned long
-es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-static unsigned long es7000_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static unsigned long calculate_ldr(int cpu)
-{
-	unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu);
-
-	return SET_APIC_LOGICAL_ID(id);
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static void es7000_init_apic_ldr_cluster(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_CLUSTER);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static void es7000_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_FLAT);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static void es7000_setup_apic_routing(void)
-{
-	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-
-	printk(KERN_INFO
-	  "Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
-		(apic_version[apic] == 0x14) ?
-			"Physical Cluster" : "Logical Cluster",
-		nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
-}
-
-static int es7000_apicid_to_node(int logical_apicid)
-{
-	return 0;
-}
-
-
-static int es7000_cpu_present_to_apicid(int mps_cpu)
-{
-	if (!mps_cpu)
-		return boot_cpu_physical_apicid;
-	else if (mps_cpu < nr_cpu_ids)
-		return per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static int cpu_id;
-
-static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
-{
-	physid_mask_t mask;
-
-	mask = physid_mask_of_physid(cpu_id);
-	++cpu_id;
-
-	return mask;
-}
-
-/* Mapping from cpu number to logical apicid */
-static int es7000_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
-}
-
-static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
-{
-	boot_cpu_physical_apicid = read_apic_id();
-	return 1;
-}
-
-static unsigned int
-es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpumask_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = cpumask_first(cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-
-	while (cpus_found < num_bits_set) {
-		if (cpumask_test_cpu(cpu, cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				WARN(1, "Not a valid mask!");
-
-				return 0xFF;
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return es7000_cpu_to_logical_apicid(0);
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk("%s: Not a valid mask!\n", __func__);
-
-				return es7000_cpu_to_logical_apicid(0);
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static unsigned int
-es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
-			      const struct cpumask *andmask)
-{
-	int apicid = es7000_cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = es7000_cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-
-	return apicid;
-}
-
-static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-void __init es7000_update_apic_to_cluster(void)
-{
-	apic->target_cpus = target_cpus_cluster;
-	apic->irq_delivery_mode = dest_LowestPrio;
-	/* logical delivery broadcast to all procs: */
-	apic->irq_dest_mode = 1;
-
-	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
-
-	apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster;
-}
-
-static int probe_es7000(void)
-{
-	/* probed later in mptable/ACPI hooks */
-	return 0;
-}
-
-static __init int
-es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	if (mpc->oemptr) {
-		struct mpc_oemtable *oem_table =
-			(struct mpc_oemtable *)mpc->oemptr;
-
-		if (!strncmp(oem, "UNISYS", 6))
-			return parse_unisys_oem((char *)oem_table);
-	}
-	return 0;
-}
-
-
-struct apic apic_es7000 = {
-
-	.name				= "es7000",
-	.probe				= probe_es7000,
-	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
-	.apic_id_registered		= es7000_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	/* phys delivery to target CPUs: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= es7000_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= 0,
-	.check_apicid_used		= es7000_check_apicid_used,
-	.check_apicid_present		= es7000_check_apicid_present,
-
-	.vector_allocation_domain	= es7000_vector_allocation_domain,
-	.init_apic_ldr			= es7000_init_apic_ldr,
-
-	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
-	.setup_apic_routing		= es7000_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= es7000_apicid_to_node,
-	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
-	.enable_apic_mode		= es7000_enable_apic_mode,
-	.phys_pkg_id			= es7000_phys_pkg_id,
-	.mps_oem_check			= es7000_mps_oem_check,
-
-	.get_apic_id			= es7000_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= es7000_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
-	.send_IPI_all			= es7000_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-
-	.trampoline_phys_low		= 0x467,
-	.trampoline_phys_high		= 0x469,
-
-	.wait_for_init_deassert		= es7000_wait_for_init_deassert,
-
-	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
deleted file mode 100644
index d9d6d61eed8..00000000000
--- a/arch/x86/kernel/numaq_32.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-#include <linux/nodemask.h>
-#include <linux/topology.h>
-#include <linux/bootmem.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-#include <linux/mmzone.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/numa.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-
-#include <asm/processor.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/numaq.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/ipi.h>
-
-#define	MB_TO_PAGES(addr)		((addr) << (20 - PAGE_SHIFT))
-
-int found_numaq;
-
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_trans {
-	unsigned char			mpc_type;
-	unsigned char			trans_len;
-	unsigned char			trans_type;
-	unsigned char			trans_quad;
-	unsigned char			trans_global;
-	unsigned char			trans_local;
-	unsigned short			trans_reserved;
-};
-
-/* x86_quirks member */
-static int				mpc_record;
-
-static __cpuinitdata struct mpc_trans	*translation_table[MAX_MPC_ENTRY];
-
-int					mp_bus_id_to_node[MAX_MP_BUSSES];
-int					mp_bus_id_to_local[MAX_MP_BUSSES];
-int					quad_local_to_mp_bus_id[NR_CPUS/4][4];
-
-
-static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
-{
-	struct eachquadmem *eq = scd->eq + node;
-
-	node_set_online(node);
-
-	/* Convert to pages */
-	node_start_pfn[node] =
-		 MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
-
-	node_end_pfn[node] =
-		 MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
-
-	e820_register_active_regions(node, node_start_pfn[node],
-						node_end_pfn[node]);
-
-	memory_present(node, node_start_pfn[node], node_end_pfn[node]);
-
-	node_remap_size[node] = node_memmap_size_bytes(node,
-					node_start_pfn[node],
-					node_end_pfn[node]);
-}
-
-/*
- * Function: smp_dump_qct()
- *
- * Description: gets memory layout from the quad config table.  This
- * function also updates node_online_map with the nodes (quads) present.
- */
-static void __init smp_dump_qct(void)
-{
-	struct sys_cfg_data *scd;
-	int node;
-
-	scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
-
-	nodes_clear(node_online_map);
-	for_each_node(node) {
-		if (scd->quads_present31_0 & (1 << node))
-			numaq_register_node(node, scd);
-	}
-}
-
-void __cpuinit numaq_tsc_disable(void)
-{
-	if (!found_numaq)
-		return;
-
-	if (num_online_nodes() > 1) {
-		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
-		setup_clear_cpu_cap(X86_FEATURE_TSC);
-	}
-}
-
-static int __init numaq_pre_time_init(void)
-{
-	numaq_tsc_disable();
-	return 0;
-}
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-/* x86_quirks member */
-static int mpc_apic_id(struct mpc_cpu *m)
-{
-	int quad = translation_table[mpc_record]->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->apicid);
-
-	printk(KERN_DEBUG
-		"Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-		 m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
-		(m->cpufeature & CPU_MODEL_MASK) >> 4,
-		 m->apicver, quad, logical_apicid);
-
-	return logical_apicid;
-}
-
-/* x86_quirks member */
-static void mpc_oem_bus_info(struct mpc_bus *m, char *name)
-{
-	int quad = translation_table[mpc_record]->trans_quad;
-	int local = translation_table[mpc_record]->trans_local;
-
-	mp_bus_id_to_node[m->busid] = quad;
-	mp_bus_id_to_local[m->busid] = local;
-
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n", m->busid, name, quad);
-}
-
-/* x86_quirks member */
-static void mpc_oem_pci_bus(struct mpc_bus *m)
-{
-	int quad = translation_table[mpc_record]->trans_quad;
-	int local = translation_table[mpc_record]->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->busid;
-}
-
-static void __init MP_translation_info(struct mpc_trans *m)
-{
-	printk(KERN_INFO
-	    "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-	       m->trans_local);
-
-	if (mpc_record >= MAX_MPC_ENTRY)
-		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-	else
-		translation_table[mpc_record] = m; /* stash this for later */
-
-	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-		node_set_online(m->trans_quad);
-}
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
-	int sum = 0;
-
-	while (len--)
-		sum += *mp++;
-
-	return sum & 0xFF;
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-static void __init
- smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
-{
-	int count = sizeof(*oemtable);	/* the header size */
-	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-	mpc_record = 0;
-	printk(KERN_INFO
-		"Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
-
-	if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
-		printk(KERN_WARNING
-		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-		       oemtable->signature[0], oemtable->signature[1],
-		       oemtable->signature[2], oemtable->signature[3]);
-		return;
-	}
-
-	if (mpf_checksum((unsigned char *)oemtable, oemtable->length)) {
-		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-		return;
-	}
-
-	while (count < oemtable->length) {
-		switch (*oemptr) {
-		case MP_TRANSLATION:
-			{
-				struct mpc_trans *m = (void *)oemptr;
-
-				MP_translation_info(m);
-				oemptr += sizeof(*m);
-				count += sizeof(*m);
-				++mpc_record;
-				break;
-			}
-		default:
-			printk(KERN_WARNING
-			       "Unrecognised OEM table entry type! - %d\n",
-			       (int)*oemptr);
-			return;
-		}
-	}
-}
-
-static int __init numaq_setup_ioapic_ids(void)
-{
-	/* so can skip it */
-	return 1;
-}
-
-static int __init numaq_update_apic(void)
-{
-	apic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;
-
-	return 0;
-}
-
-static struct x86_quirks numaq_x86_quirks __initdata = {
-	.arch_pre_time_init		= numaq_pre_time_init,
-	.arch_time_init			= NULL,
-	.arch_pre_intr_init		= NULL,
-	.arch_memory_setup		= NULL,
-	.arch_intr_init			= NULL,
-	.arch_trap_init			= NULL,
-	.mach_get_smp_config		= NULL,
-	.mach_find_smp_config		= NULL,
-	.mpc_record			= &mpc_record,
-	.mpc_apic_id			= mpc_apic_id,
-	.mpc_oem_bus_info		= mpc_oem_bus_info,
-	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
-	.smp_read_mpc_oem		= smp_read_mpc_oem,
-	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
-	.update_apic			= numaq_update_apic,
-};
-
-static __init void early_check_numaq(void)
-{
-	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-	early_find_smp_config();
-
-	/*
-	 * get boot-time SMP configuration:
-	 */
-	if (smp_found_config)
-		early_get_smp_config();
-
-	if (found_numaq)
-		x86_quirks = &numaq_x86_quirks;
-}
-
-int __init get_memcfg_numaq(void)
-{
-	early_check_numaq();
-	if (!found_numaq)
-		return 0;
-	smp_dump_qct();
-
-	return 1;
-}
-
-#define NUMAQ_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline unsigned int numaq_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0x0F;
-}
-
-static inline void numaq_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence_logical(mask, vector);
-}
-
-static inline void numaq_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
-}
-
-static inline void numaq_send_IPI_all(int vector)
-{
-	numaq_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#define NUMAQ_TRAMPOLINE_PHYS_LOW	(0x8)
-#define NUMAQ_TRAMPOLINE_PHYS_HIGH	(0xa)
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it:
- */
-static inline void numaq_smp_callin_clear_local_apic(void)
-{
-	clear_local_APIC();
-}
-
-static inline const cpumask_t *numaq_target_cpus(void)
-{
-	return &CPU_MASK_ALL;
-}
-
-static inline unsigned long
-numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long numaq_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline int numaq_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void numaq_init_apic_ldr(void)
-{
-	/* Already done in NUMA-Q firmware */
-}
-
-static inline void numaq_setup_apic_routing(void)
-{
-	printk(KERN_INFO
-		"Enabling APIC mode:  NUMA-Q.  Using %d I/O APICs\n",
-		nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int numaq_multi_timer_check(int apic, int irq)
-{
-	return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
-}
-
-static inline int numaq_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int numaq_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < 60)
-		return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
-	else
-		return BAD_APICID;
-}
-
-static inline int numaq_apicid_to_node(int logical_apicid)
-{
-	return logical_apicid >> 4;
-}
-
-static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
-{
-	int node = numaq_apicid_to_node(logical_apicid);
-	int cpu = __ffs(logical_apicid & 0xf);
-
-	return physid_mask_of_physid(cpu + 4*node);
-}
-
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-
-static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int numaq_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return 0x0F;
-}
-
-static inline unsigned int
-numaq_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			     const struct cpumask *andmask)
-{
-	return 0x0F;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline int numaq_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-static int
-numaq_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	if (strncmp(oem, "IBM NUMA", 8))
-		printk(KERN_ERR "Warning! Not a NUMA-Q system!\n");
-	else
-		found_numaq = 1;
-
-	return found_numaq;
-}
-
-static int probe_numaq(void)
-{
-	/* already know from get_memcfg_numaq() */
-	return found_numaq;
-}
-
-static void numaq_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-static void numaq_setup_portio_remap(void)
-{
-	int num_quads = num_online_nodes();
-
-	if (num_quads <= 1)
-		return;
-
-	printk(KERN_INFO
-		"Remapping cross-quad port I/O for %d quads\n", num_quads);
-
-	xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
-
-	printk(KERN_INFO
-		"xquad_portio vaddr 0x%08lx, len %08lx\n",
-		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-struct apic apic_numaq = {
-
-	.name				= "NUMAQ",
-	.probe				= probe_numaq,
-	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= numaq_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* physical delivery on LOCAL quad: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= numaq_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= numaq_check_apicid_used,
-	.check_apicid_present		= numaq_check_apicid_present,
-
-	.vector_allocation_domain	= numaq_vector_allocation_domain,
-	.init_apic_ldr			= numaq_init_apic_ldr,
-
-	.ioapic_phys_id_map		= numaq_ioapic_phys_id_map,
-	.setup_apic_routing		= numaq_setup_apic_routing,
-	.multi_timer_check		= numaq_multi_timer_check,
-	.apicid_to_node			= numaq_apicid_to_node,
-	.cpu_to_logical_apicid		= numaq_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= numaq_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= numaq_apicid_to_cpu_present,
-	.setup_portio_remap		= numaq_setup_portio_remap,
-	.check_phys_apicid_present	= numaq_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= numaq_phys_pkg_id,
-	.mps_oem_check			= numaq_mps_oem_check,
-
-	.get_apic_id			= numaq_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0x0F << 24,
-
-	.cpu_mask_to_apicid		= numaq_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= numaq_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= numaq_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= numaq_send_IPI_allbutself,
-	.send_IPI_all			= numaq_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
-
-	/* We don't do anything here because we use NMI's to boot instead */
-	.wait_for_init_deassert		= NULL,
-
-	.smp_callin_clear_local_apic	= numaq_smp_callin_clear_local_apic,
-	.inquire_remote_apic		= NULL,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
diff --git a/arch/x86/kernel/probe_32.c b/arch/x86/kernel/probe_32.c
deleted file mode 100644
index 5fa48332c5c..00000000000
--- a/arch/x86/kernel/probe_32.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * Default generic APIC driver. This handles up to 8 CPUs.
- *
- * Copyright 2003 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License, v.2
- *
- * Generic x86 APIC driver probe layer.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/apicdef.h>
-#include <asm/apic.h>
-#include <asm/setup.h>
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <asm/ipi.h>
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/acpi.h>
-#include <asm/arch_hooks.h>
-#include <asm/e820.h>
-#include <asm/setup.h>
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-int no_broadcast = DEFAULT_SEND_IPI;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-void default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	printk(KERN_INFO
-		"Enabling APIC mode:  Flat.  Using %d I/O APICs\n",
-		nr_ioapics);
-#endif
-}
-
-static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	/*
-	 * Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t) { { [0] = APIC_ALL_CPUS } };
-}
-
-/* should be called last. */
-static int probe_default(void)
-{
-	return 1;
-}
-
-struct apic apic_default = {
-
-	.name				= "default",
-	.probe				= probe_default,
-	.acpi_madt_oem_check		= NULL,
-	.apic_id_registered		= default_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* logical delivery broadcast to all CPUs: */
-	.irq_dest_mode			= 1,
-
-	.target_cpus			= default_target_cpus,
-	.disable_esr			= 0,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= default_check_apicid_used,
-	.check_apicid_present		= default_check_apicid_present,
-
-	.vector_allocation_domain	= default_vector_allocation_domain,
-	.init_apic_ldr			= default_init_apic_ldr,
-
-	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= default_apicid_to_node,
-	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= default_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= default_phys_pkg_id,
-	.mps_oem_check			= NULL,
-
-	.get_apic_id			= default_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0x0F << 24,
-
-	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= default_send_IPI_mask_logical,
-	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
-	.send_IPI_allbutself		= default_send_IPI_allbutself,
-	.send_IPI_all			= default_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
-
-extern struct apic apic_numaq;
-extern struct apic apic_summit;
-extern struct apic apic_bigsmp;
-extern struct apic apic_es7000;
-extern struct apic apic_default;
-
-struct apic *apic = &apic_default;
-EXPORT_SYMBOL_GPL(apic);
-
-static struct apic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_NUMAQ
-	&apic_numaq,
-#endif
-#ifdef CONFIG_X86_SUMMIT
-	&apic_summit,
-#endif
-#ifdef CONFIG_X86_BIGSMP
-	&apic_bigsmp,
-#endif
-#ifdef CONFIG_X86_ES7000
-	&apic_es7000,
-#endif
-	&apic_default,	/* must be last */
-	NULL,
-};
-
-static int cmdline_apic __initdata;
-static int __init parse_apic(char *arg)
-{
-	int i;
-
-	if (!arg)
-		return -EINVAL;
-
-	for (i = 0; apic_probe[i]; i++) {
-		if (!strcmp(apic_probe[i]->name, arg)) {
-			apic = apic_probe[i];
-			cmdline_apic = 1;
-			return 0;
-		}
-	}
-
-	if (x86_quirks->update_apic)
-		x86_quirks->update_apic();
-
-	/* Parsed again by __setup for debug/verbose */
-	return 0;
-}
-early_param("apic", parse_apic);
-
-void __init generic_bigsmp_probe(void)
-{
-#ifdef CONFIG_X86_BIGSMP
-	/*
-	 * This routine is used to switch to bigsmp mode when
-	 * - There is no apic= option specified by the user
-	 * - generic_apic_probe() has chosen apic_default as the sub_arch
-	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
-	 */
-
-	if (!cmdline_apic && apic == &apic_default) {
-		if (apic_bigsmp.probe()) {
-			apic = &apic_bigsmp;
-			if (x86_quirks->update_apic)
-				x86_quirks->update_apic();
-			printk(KERN_INFO "Overriding APIC driver with %s\n",
-			       apic->name);
-		}
-	}
-#endif
-}
-
-void __init generic_apic_probe(void)
-{
-	if (!cmdline_apic) {
-		int i;
-		for (i = 0; apic_probe[i]; i++) {
-			if (apic_probe[i]->probe()) {
-				apic = apic_probe[i];
-				break;
-			}
-		}
-		/* Not visible without early console */
-		if (!apic_probe[i])
-			panic("Didn't find an APIC driver");
-
-		if (x86_quirks->update_apic)
-			x86_quirks->update_apic();
-	}
-	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
-}
-
-/* These functions can switch the APIC even after the initial ->probe() */
-
-int __init
-generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	int i;
-
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->mps_oem_check)
-			continue;
-		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
-			continue;
-
-		if (!cmdline_apic) {
-			apic = apic_probe[i];
-			if (x86_quirks->update_apic)
-				x86_quirks->update_apic();
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-			       apic->name);
-		}
-		return 1;
-	}
-	return 0;
-}
-
-int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	int i;
-
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->acpi_madt_oem_check)
-			continue;
-		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
-			continue;
-
-		if (!cmdline_apic) {
-			apic = apic_probe[i];
-			if (x86_quirks->update_apic)
-				x86_quirks->update_apic();
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
-			       apic->name);
-		}
-		return 1;
-	}
-	return 0;
-}
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	if (x86_quirks->arch_pre_intr_init) {
-		if (x86_quirks->arch_pre_intr_init())
-			return;
-	}
-	init_ISA_irqs();
-}
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-	if (x86_quirks->arch_intr_init) {
-		if (x86_quirks->arch_intr_init())
-			return;
-	}
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On Voyager
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-	if (x86_quirks->arch_trap_init) {
-		if (x86_quirks->arch_trap_init())
-			return;
-	}
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-/**
- * pre_time_init_hook - do any specific initialisations before.
- *
- **/
-void __init pre_time_init_hook(void)
-{
-	if (x86_quirks->arch_pre_time_init)
-		x86_quirks->arch_pre_time_init();
-}
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	if (x86_quirks->arch_time_init) {
-		/*
-		 * A nonzero return code does not mean failure, it means
-		 * that the architecture quirk does not want any
-		 * generic (timer) setup to be performed after this:
-		 */
-		if (x86_quirks->arch_time_init())
-			return;
-	}
-
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void mca_nmi_hook(void)
-{
-	/*
-	 * If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-	pr_warning("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	pr_info("Using %s mode\n",
-		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
-	return 1;
-}
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
-	pr_info("Using IPI %s mode\n",
-		no_broadcast ? "No-Shortcut" : "Shortcut");
-	return 0;
-}
-
-late_initcall(print_ipi_mode);
-
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
deleted file mode 100644
index cfe7b09015d..00000000000
--- a/arch/x86/kernel/summit_32.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/*
- * IBM Summit-Specific Code
- *
- * Written By: Matthew Dobson, IBM Corporation
- *
- * Copyright (c) 2003 IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/bios_ebda.h>
-
-/*
- * APIC driver for the IBM "Summit" chipset.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <asm/smp.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/ipi.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/smp.h>
-
-static inline unsigned summit_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
-{
-	default_send_IPI_mask_sequence_logical(mask, vector);
-}
-
-static inline void summit_send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-
-	if (!cpus_empty(mask))
-		summit_send_IPI_mask(&mask, vector);
-}
-
-static inline void summit_send_IPI_all(int vector)
-{
-	summit_send_IPI_mask(&cpu_online_map, vector);
-}
-
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
-#else
-#define setup_summit()	{}
-#endif
-
-static inline int
-summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
-{
-	if (!strncmp(oem, "IBM ENSW", 8) &&
-			(!strncmp(productid, "VIGIL SMP", 9)
-			 || !strncmp(productid, "EXA", 3)
-			 || !strncmp(productid, "RUTHLESS SMP", 12))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (!strncmp(oem_id, "IBM", 3) &&
-	    (!strncmp(oem_table_id, "SERVIGIL", 8)
-	     || !strncmp(oem_table_id, "EXA", 3))){
-		mark_tsc_unstable("Summit based system");
-		use_cyclone = 1; /*enable cyclone-timer*/
-		setup_summit();
-		return 1;
-	}
-	return 0;
-}
-
-struct rio_table_hdr {
-	unsigned char version;      /* Version number of this data structure           */
-	                            /* Version 3 adds chassis_num & WP_index           */
-	unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
-	unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
-} __attribute__((packed));
-
-struct scal_detail {
-	unsigned char node_id;      /* Scalability Node ID                             */
-	unsigned long CBAR;         /* Address of 1MB register space                   */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
-	unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
-} __attribute__((packed));
-
-struct rio_detail {
-	unsigned char node_id;      /* RIO Node ID                                     */
-	unsigned long BBAR;         /* Address of 1MB register space                   */
-	unsigned char type;         /* Type of device                                  */
-	unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
-	                            /* For CYC:  Node ID of Twister that owns this CYC */
-	unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
-	unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
-	unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
-	                            /* For CYC:  0                                     */
-	unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
-	                            /*                 = 0 : the XAPIC is not used, ie:*/
-	                            /*                     ints fwded to another XAPIC */
-	                            /*           Bits1:7 Reserved                      */
-	                            /* For CYC:  Bits0:7 Reserved                      */
-	unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
-	                            /*           lower slot numbers/PCI bus numbers    */
-	                            /* For CYC:  No meaning                            */
-	unsigned char chassis_num;  /* 1 based Chassis number                          */
-	                            /* For LookOut WPEGs this field indicates the      */
-	                            /* Expansion Chassis #, enumerated from Boot       */
-	                            /* Node WPEG external port, then Boot Node CYC     */
-	                            /* external port, then Next Vigil chassis WPEG     */
-	                            /* external port, etc.                             */
-	                            /* Shared Lookouts have only 1 chassis number (the */
-	                            /* first one assigned)                             */
-} __attribute__((packed));
-
-
-typedef enum {
-	CompatTwister = 0,  /* Compatibility Twister               */
-	AltTwister    = 1,  /* Alternate Twister of internal 8-way */
-	CompatCyclone = 2,  /* Compatibility Cyclone               */
-	AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
-	CompatWPEG    = 4,  /* Compatibility WPEG                  */
-	AltWPEG       = 5,  /* Second Planar WPEG                  */
-	LookOutAWPEG  = 6,  /* LookOut WPEG                        */
-	LookOutBWPEG  = 7,  /* LookOut WPEG                        */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
-	return (rio->type == CompatWPEG || rio->type == AltWPEG ||
-		rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define SUMMIT_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *summit_target_cpus(void)
-{
-	/* CPU_MASK_ALL (0xff) has undefined behaviour with
-	 * dest_LowestPrio mode logical clustered apic interrupt routing
-	 * Just start on cpu 0.  IRQ balancing will spread load
-	 */
-	return &cpumask_of_cpu(0);
-}
-
-static inline unsigned long
-summit_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long summit_check_apicid_present(int bit)
-{
-	return 1;
-}
-
-static inline void summit_init_apic_ldr(void)
-{
-	unsigned long val, id;
-	int count = 0;
-	u8 my_id = (u8)hard_smp_processor_id();
-	u8 my_cluster = APIC_CLUSTER(my_id);
-#ifdef CONFIG_SMP
-	u8 lid;
-	int i;
-
-	/* Create logical APIC IDs by counting CPUs already in cluster. */
-	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
-		lid = cpu_2_logical_apicid[i];
-		if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
-			++count;
-	}
-#endif
-	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
-	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
-	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
-	id = my_cluster | (1UL << count);
-	apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static inline int summit_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void summit_setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
-						nr_ioapics);
-}
-
-static inline int summit_apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int summit_cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline int summit_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t
-summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
-}
-
-static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
-{
-	return physid_mask_of_physid(0);
-}
-
-static inline void summit_setup_portio_remap(void)
-{
-}
-
-static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set >= nr_cpu_ids)
-		return 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = summit_cpu_to_logical_apicid(cpu);
-
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = summit_cpu_to_logical_apicid(cpu);
-
-			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
-
-				return 0xFF;
-			}
-			apicid = apicid | new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline unsigned int
-summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
-			      const struct cpumask *andmask)
-{
-	int apicid = summit_cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = summit_cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-
-	return apicid;
-}
-
-/*
- * cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value.  For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-static int probe_summit(void)
-{
-	/* probed later in mptable/ACPI hooks */
-	return 0;
-}
-
-static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	*retmask = (cpumask_t){ { [0] = APIC_ALL_CPUS, } };
-}
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-static struct rio_table_hdr *rio_table_hdr __initdata;
-static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
-static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
-
-#ifndef CONFIG_X86_NUMAQ
-static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
-#endif
-
-static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
-{
-	int twister = 0, node = 0;
-	int i, bus, num_buses;
-
-	for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
-		if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
-			twister = rio_devs[i]->owner_id;
-			break;
-		}
-	}
-	if (i == rio_table_hdr->num_rio_dev) {
-		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
-		return last_bus;
-	}
-
-	for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
-		if (scal_devs[i]->node_id == twister) {
-			node = scal_devs[i]->node_id;
-			break;
-		}
-	}
-	if (i == rio_table_hdr->num_scal_dev) {
-		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
-		return last_bus;
-	}
-
-	switch (rio_devs[wpeg_num]->type) {
-	case CompatWPEG:
-		/*
-		 * The Compatibility Winnipeg controls the 2 legacy buses,
-		 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
-		 * a PCI-PCI bridge card is used in either slot: total 5 buses.
-		 */
-		num_buses = 5;
-		break;
-	case AltWPEG:
-		/*
-		 * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
-		 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
-		 * the "extra" buses for each of those slots: total 7 buses.
-		 */
-		num_buses = 7;
-		break;
-	case LookOutAWPEG:
-	case LookOutBWPEG:
-		/*
-		 * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
-		 * & the "extra" buses for each of those slots: total 9 buses.
-		 */
-		num_buses = 9;
-		break;
-	default:
-		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
-		return last_bus;
-	}
-
-	for (bus = last_bus; bus < last_bus + num_buses; bus++)
-		mp_bus_id_to_node[bus] = node;
-	return bus;
-}
-
-static int __init build_detail_arrays(void)
-{
-	unsigned long ptr;
-	int i, scal_detail_size, rio_detail_size;
-
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
-		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
-		return 0;
-	}
-
-	switch (rio_table_hdr->version) {
-	default:
-		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
-		return 0;
-	case 2:
-		scal_detail_size = 11;
-		rio_detail_size = 13;
-		break;
-	case 3:
-		scal_detail_size = 12;
-		rio_detail_size = 15;
-		break;
-	}
-
-	ptr = (unsigned long)rio_table_hdr + 3;
-	for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
-		scal_devs[i] = (struct scal_detail *)ptr;
-
-	for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
-		rio_devs[i] = (struct rio_detail *)ptr;
-
-	return 1;
-}
-
-void __init setup_summit(void)
-{
-	unsigned long		ptr;
-	unsigned short		offset;
-	int			i, next_wpeg, next_bus = 0;
-
-	/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
-	ptr = get_bios_ebda();
-	ptr = (unsigned long)phys_to_virt(ptr);
-
-	rio_table_hdr = NULL;
-	offset = 0x180;
-	while (offset) {
-		/* The block id is stored in the 2nd word */
-		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
-			/* set the pointer past the offset & block id */
-			rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
-			break;
-		}
-		/* The next offset is stored in the 1st word.  0 means no more */
-		offset = *((unsigned short *)(ptr + offset));
-	}
-	if (!rio_table_hdr) {
-		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
-		return;
-	}
-
-	if (!build_detail_arrays())
-		return;
-
-	/* The first Winnipeg we're looking for has an index of 0 */
-	next_wpeg = 0;
-	do {
-		for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
-			if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
-				/* It's the Winnipeg we're looking for! */
-				next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
-				next_wpeg++;
-				break;
-			}
-		}
-		/*
-		 * If we go through all Rio devices and don't find one with
-		 * the next index, it means we've found all the Winnipegs,
-		 * and thus all the PCI buses.
-		 */
-		if (i == rio_table_hdr->num_rio_dev)
-			next_wpeg = 0;
-	} while (next_wpeg != 0);
-}
-#endif
-
-struct apic apic_summit = {
-
-	.name				= "summit",
-	.probe				= probe_summit,
-	.acpi_madt_oem_check		= summit_acpi_madt_oem_check,
-	.apic_id_registered		= summit_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* logical delivery broadcast to all CPUs: */
-	.irq_dest_mode			= 1,
-
-	.target_cpus			= summit_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= APIC_DEST_LOGICAL,
-	.check_apicid_used		= summit_check_apicid_used,
-	.check_apicid_present		= summit_check_apicid_present,
-
-	.vector_allocation_domain	= summit_vector_allocation_domain,
-	.init_apic_ldr			= summit_init_apic_ldr,
-
-	.ioapic_phys_id_map		= summit_ioapic_phys_id_map,
-	.setup_apic_routing		= summit_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.apicid_to_node			= summit_apicid_to_node,
-	.cpu_to_logical_apicid		= summit_cpu_to_logical_apicid,
-	.cpu_present_to_apicid		= summit_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= summit_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= summit_check_phys_apicid_present,
-	.enable_apic_mode		= NULL,
-	.phys_pkg_id			= summit_phys_pkg_id,
-	.mps_oem_check			= summit_mps_oem_check,
-
-	.get_apic_id			= summit_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid		= summit_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= summit_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= summit_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= summit_send_IPI_allbutself,
-	.send_IPI_all			= summit_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.wakeup_cpu			= NULL,
-	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
-	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-};
-- 
cgit v1.2.3


From a7eb518998529c08cc53fef17756d9fe433b0c23 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Tue, 17 Feb 2009 13:01:51 -0800
Subject: x86: truncate ISA addresses to unsigned int

Impact: Cleanup; fix inappropriate macro use

ISA addresses on x86 are mapped 1:1 with the physical address space.
Since the ISA address space is only 24 bits (32 for VLB or LPC) it
will always fit in an unsigned int, and at least in the aha1542 driver
using a wider type would cause an undesirable promotion.  Hence
explicitly cast the ISA bus addresses to unsigned int.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
---
 arch/x86/include/asm/io.h | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 4f8e820cf38..683d0b4c00f 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -124,10 +124,15 @@ static inline void *phys_to_virt(phys_addr_t address)
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
+ * However, we truncate the address to unsigned int to avoid undesirable
+ * promitions in legacy drivers.
  */
-#define isa_virt_to_bus (unsigned long)virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
+static inline unsigned int isa_virt_to_bus(volatile void *address)
+{
+	return (unsigned int)virt_to_phys(address);
+}
+#define isa_page_to_bus(page)	((unsigned int)page_to_phys(page))
+#define isa_bus_to_virt		phys_to_virt
 
 /*
  * However PCI ones are not necessarily 1:1 and therefore these interfaces
-- 
cgit v1.2.3


From 9be1b56a3e718aa998772019c57c398dbb19e258 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 17 Feb 2009 23:12:48 +0100
Subject: x86, apic: separate 32-bit setup functionality out of apic_32.c

Impact: build fix, cleanup

A couple of arch setup callbacks were mistakenly in apic_32.c, breaking
the build.

Also simplify the code a bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/Makefile        |   2 +-
 arch/x86/kernel/apic/Makefile   |   3 +-
 arch/x86/kernel/apic/probe_32.c | 160 ++++------------------------------------
 arch/x86/kernel/setup.c         | 124 +++++++++++++++++++++++++++++++
 4 files changed, 142 insertions(+), 147 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index c70537d8c15..de5657c039e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -63,7 +63,7 @@ obj-$(CONFIG_SMP)		+= setup_percpu.o
 obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic/
+obj-y				+= apic/
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 97f558db5c3..da7b7b9f8bd 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -2,10 +2,9 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-y				:= apic.o probe_$(BITS).o ipi.o nmi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o probe_$(BITS).o ipi.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
-obj-$
 
 ifeq ($(CONFIG_X86_64),y)
 obj-y				+= apic_flat_64.o
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 5fa48332c5c..c9ec90742e9 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -47,7 +47,22 @@
 
 int no_broadcast = DEFAULT_SEND_IPI;
 
-#ifdef CONFIG_X86_LOCAL_APIC
+static __init int no_ipi_broadcast(char *str)
+{
+	get_option(&str, &no_broadcast);
+	pr_info("Using %s mode\n",
+		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
+	return 1;
+}
+__setup("no_ipi_broadcast=", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+	pr_info("Using IPI %s mode\n",
+		no_broadcast ? "No-Shortcut" : "Shortcut");
+	return 0;
+}
+late_initcall(print_ipi_mode);
 
 void default_setup_apic_routing(void)
 {
@@ -279,146 +294,3 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	}
 	return 0;
 }
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	if (x86_quirks->arch_pre_intr_init) {
-		if (x86_quirks->arch_pre_intr_init())
-			return;
-	}
-	init_ISA_irqs();
-}
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-	if (x86_quirks->arch_intr_init) {
-		if (x86_quirks->arch_intr_init())
-			return;
-	}
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On Voyager
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-	if (x86_quirks->arch_trap_init) {
-		if (x86_quirks->arch_trap_init())
-			return;
-	}
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-/**
- * pre_time_init_hook - do any specific initialisations before.
- *
- **/
-void __init pre_time_init_hook(void)
-{
-	if (x86_quirks->arch_pre_time_init)
-		x86_quirks->arch_pre_time_init();
-}
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	if (x86_quirks->arch_time_init) {
-		/*
-		 * A nonzero return code does not mean failure, it means
-		 * that the architecture quirk does not want any
-		 * generic (timer) setup to be performed after this:
-		 */
-		if (x86_quirks->arch_time_init())
-			return;
-	}
-
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void mca_nmi_hook(void)
-{
-	/*
-	 * If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-	pr_warning("NMI generated from unknown source!\n");
-}
-#endif
-
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	pr_info("Using %s mode\n",
-		no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
-	return 1;
-}
-__setup("no_ipi_broadcast=", no_ipi_broadcast);
-
-static int __init print_ipi_mode(void)
-{
-	pr_info("Using IPI %s mode\n",
-		no_broadcast ? "No-Shortcut" : "Shortcut");
-	return 0;
-}
-
-late_initcall(print_ipi_mode);
-
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6b588d6b388..ebef8005579 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -985,4 +985,128 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
+#ifdef CONFIG_X86_32
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *	Perform any necessary interrupt initialisation prior to setting up
+ *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *	interrupts should be initialised here if the machine emulates a PC
+ *	in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
+			return;
+	}
+	init_ISA_irqs();
+}
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ *	Fill in any interrupts that may have been left out by the general
+ *	init_IRQ() routine.  interrupts having to do with the machine rather
+ *	than the devices on the I/O bus (like APIC interrupts in intel MP
+ *	systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
+			return;
+	}
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ *	generally used to activate any machine specific identification
+ *	routines that may be needed before setup_arch() runs.  On Voyager
+ *	this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ *	Called as the final act of trap_init().  Used in VISWS to initialise
+ *	the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
+			return;
+	}
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+	.mask = CPU_MASK_NONE,
+	.name = "timer"
+};
+
+/**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ *	Must plug the system timer interrupt source at HZ into the IRQ listed
+ *	in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+	if (x86_quirks->arch_time_init) {
+		/*
+		 * A nonzero return code does not mean failure, it means
+		 * that the architecture quirk does not want any
+		 * generic (timer) setup to be performed after this:
+		 */
+		if (x86_quirks->arch_time_init())
+			return;
+	}
+
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
+ *	along the MCA bus.  Use this to hook into that chain if you will need
+ *	it.
+ **/
+void mca_nmi_hook(void)
+{
+	/*
+	 * If I recall correctly, there's a whole bunch of other things that
+	 * we can do to check for NMI problems, but that's all I know about
+	 * at the moment.
+	 */
+	pr_warning("NMI generated from unknown source!\n");
+}
+#endif /* CONFIG_MCA */
 
+#endif /* CONFIG_X86_32 */
-- 
cgit v1.2.3


From 109568e110ed67d4be1b28609b9fa00fca97f8eb Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 9 Jan 2009 16:49:30 +1100
Subject: crypto: aes - Move key_length in struct crypto_aes_ctx to be the last
 field

The Intel AES-NI AES acceleration instructions need key_enc, key_dec
in struct crypto_aes_ctx to be 16 byte aligned, it make this easier to
move key_length to be the last one.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/x86/crypto/aes-i586-asm_32.S   | 6 +++---
 arch/x86/crypto/aes-x86_64-asm_64.S | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S
index e41b147f450..5252c388017 100644
--- a/arch/x86/crypto/aes-i586-asm_32.S
+++ b/arch/x86/crypto/aes-i586-asm_32.S
@@ -46,9 +46,9 @@
 #define in_blk 16
 
 /* offsets in crypto_tfm structure */
-#define klen (crypto_tfm_ctx_offset + 0)
-#define ekey (crypto_tfm_ctx_offset + 4)
-#define dkey (crypto_tfm_ctx_offset + 244)
+#define klen (crypto_tfm_ctx_offset + 480)
+#define ekey (crypto_tfm_ctx_offset + 0)
+#define dkey (crypto_tfm_ctx_offset + 240)
 
 // register mapping for encrypt and decrypt subroutines
 
diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S b/arch/x86/crypto/aes-x86_64-asm_64.S
index a120f526c3d..7f28f62737d 100644
--- a/arch/x86/crypto/aes-x86_64-asm_64.S
+++ b/arch/x86/crypto/aes-x86_64-asm_64.S
@@ -56,13 +56,13 @@
 	.align	8;			\
 FUNC:	movq	r1,r2;			\
 	movq	r3,r4;			\
-	leaq	BASE+KEY+48+4(r8),r9;	\
+	leaq	BASE+KEY+48(r8),r9;	\
 	movq	r10,r11;		\
 	movl	(r7),r5 ## E;		\
 	movl	4(r7),r1 ## E;		\
 	movl	8(r7),r6 ## E;		\
 	movl	12(r7),r7 ## E;		\
-	movl	BASE+0(r8),r10 ## E;	\
+	movl	BASE+480(r8),r10 ## E;	\
 	xorl	-48(r9),r5 ## E;	\
 	xorl	-44(r9),r1 ## E;	\
 	xorl	-40(r9),r6 ## E;	\
-- 
cgit v1.2.3


From 07bf44f86989f5ed866510374fe761d1903681fb Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 9 Jan 2009 17:25:50 +1100
Subject: crypto: aes - Export x86 AES encrypt/decrypt functions

Intel AES-NI AES acceleration instructions touch XMM state, to use
that in soft_irq context, general x86 AES implementation is used as
fallback. The first parameter is changed from struct crypto_tfm * to
struct crypto_aes_ctx * to make it easier to deal with 16 bytes
alignment requirement of AES-NI implementation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/x86/crypto/aes-i586-asm_32.S   | 18 +++++++++---------
 arch/x86/crypto/aes-x86_64-asm_64.S |  6 ++----
 arch/x86/crypto/aes_glue.c          | 20 ++++++++++++++++----
 arch/x86/include/asm/aes.h          | 11 +++++++++++
 4 files changed, 38 insertions(+), 17 deletions(-)
 create mode 100644 arch/x86/include/asm/aes.h

(limited to 'arch')

diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S
index 5252c388017..b949ec2f9af 100644
--- a/arch/x86/crypto/aes-i586-asm_32.S
+++ b/arch/x86/crypto/aes-i586-asm_32.S
@@ -41,14 +41,14 @@
 #define tlen 1024   // length of each of 4 'xor' arrays (256 32-bit words)
 
 /* offsets to parameters with one register pushed onto stack */
-#define tfm 8
+#define ctx 8
 #define out_blk 12
 #define in_blk 16
 
-/* offsets in crypto_tfm structure */
-#define klen (crypto_tfm_ctx_offset + 480)
-#define ekey (crypto_tfm_ctx_offset + 0)
-#define dkey (crypto_tfm_ctx_offset + 240)
+/* offsets in crypto_aes_ctx structure */
+#define klen (480)
+#define ekey (0)
+#define dkey (240)
 
 // register mapping for encrypt and decrypt subroutines
 
@@ -217,7 +217,7 @@
 	do_col (table, r5,r0,r1,r4, r2,r3);		/* idx=r5 */
 
 // AES (Rijndael) Encryption Subroutine
-/* void aes_enc_blk(struct crypto_tfm *tfm, u8 *out_blk, const u8 *in_blk) */
+/* void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */
 
 .global  aes_enc_blk
 
@@ -228,7 +228,7 @@
 
 aes_enc_blk:
 	push    %ebp
-	mov     tfm(%esp),%ebp
+	mov     ctx(%esp),%ebp
 
 // CAUTION: the order and the values used in these assigns 
 // rely on the register mappings
@@ -292,7 +292,7 @@ aes_enc_blk:
 	ret
 
 // AES (Rijndael) Decryption Subroutine
-/* void aes_dec_blk(struct crypto_tfm *tfm, u8 *out_blk, const u8 *in_blk) */
+/* void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out_blk, const u8 *in_blk) */
 
 .global  aes_dec_blk
 
@@ -303,7 +303,7 @@ aes_enc_blk:
 
 aes_dec_blk:
 	push    %ebp
-	mov     tfm(%esp),%ebp
+	mov     ctx(%esp),%ebp
 
 // CAUTION: the order and the values used in these assigns 
 // rely on the register mappings
diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S b/arch/x86/crypto/aes-x86_64-asm_64.S
index 7f28f62737d..5b577d5a059 100644
--- a/arch/x86/crypto/aes-x86_64-asm_64.S
+++ b/arch/x86/crypto/aes-x86_64-asm_64.S
@@ -17,8 +17,6 @@
 
 #include <asm/asm-offsets.h>
 
-#define BASE crypto_tfm_ctx_offset
-
 #define R1	%rax
 #define R1E	%eax
 #define R1X	%ax
@@ -56,13 +54,13 @@
 	.align	8;			\
 FUNC:	movq	r1,r2;			\
 	movq	r3,r4;			\
-	leaq	BASE+KEY+48(r8),r9;	\
+	leaq	KEY+48(r8),r9;		\
 	movq	r10,r11;		\
 	movl	(r7),r5 ## E;		\
 	movl	4(r7),r1 ## E;		\
 	movl	8(r7),r6 ## E;		\
 	movl	12(r7),r7 ## E;		\
-	movl	BASE+480(r8),r10 ## E;	\
+	movl	480(r8),r10 ## E;	\
 	xorl	-48(r9),r5 ## E;	\
 	xorl	-44(r9),r1 ## E;	\
 	xorl	-40(r9),r6 ## E;	\
diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c
index 71f45782711..49ae9fe32b2 100644
--- a/arch/x86/crypto/aes_glue.c
+++ b/arch/x86/crypto/aes_glue.c
@@ -5,17 +5,29 @@
 
 #include <crypto/aes.h>
 
-asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in);
-asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in);
+asmlinkage void aes_enc_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in);
+asmlinkage void aes_dec_blk(struct crypto_aes_ctx *ctx, u8 *out, const u8 *in);
+
+void crypto_aes_encrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src)
+{
+	aes_enc_blk(ctx, dst, src);
+}
+EXPORT_SYMBOL_GPL(crypto_aes_encrypt_x86);
+
+void crypto_aes_decrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src)
+{
+	aes_dec_blk(ctx, dst, src);
+}
+EXPORT_SYMBOL_GPL(crypto_aes_decrypt_x86);
 
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
-	aes_enc_blk(tfm, dst, src);
+	aes_enc_blk(crypto_tfm_ctx(tfm), dst, src);
 }
 
 static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
-	aes_dec_blk(tfm, dst, src);
+	aes_dec_blk(crypto_tfm_ctx(tfm), dst, src);
 }
 
 static struct crypto_alg aes_alg = {
diff --git a/arch/x86/include/asm/aes.h b/arch/x86/include/asm/aes.h
new file mode 100644
index 00000000000..80545a1cbe3
--- /dev/null
+++ b/arch/x86/include/asm/aes.h
@@ -0,0 +1,11 @@
+#ifndef ASM_X86_AES_H
+#define ASM_X86_AES_H
+
+#include <linux/crypto.h>
+#include <crypto/aes.h>
+
+void crypto_aes_encrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst,
+			    const u8 *src);
+void crypto_aes_decrypt_x86(struct crypto_aes_ctx *ctx, u8 *dst,
+			    const u8 *src);
+#endif
-- 
cgit v1.2.3


From 54b6a1bd5364aca95cd6ffae00f2b64c6511122c Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Sun, 18 Jan 2009 16:28:34 +1100
Subject: crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64
 platform

Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
instructions that are going to be introduced in the next generation of
Intel processor, as of 2009. These instructions enable fast and secure
data encryption and decryption, using the Advanced Encryption Standard
(AES), defined by FIPS Publication number 197.  The architecture
introduces six instructions that offer full hardware support for
AES. Four of them support high performance data encryption and
decryption, and the other two instructions support the AES key
expansion procedure.

The white paper can be downloaded from:

http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf

AES may be used in soft_irq context, but MMX/SSE context can not be
touched safely in soft_irq context. So in_interrupt() is checked, if
in IRQ or soft_irq context, the general x86_64 implementation are used
instead.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/x86/crypto/Makefile           |   3 +
 arch/x86/crypto/aesni-intel_asm.S  | 896 +++++++++++++++++++++++++++++++++++++
 arch/x86/crypto/aesni-intel_glue.c | 461 +++++++++++++++++++
 arch/x86/include/asm/cpufeature.h  |   1 +
 4 files changed, 1361 insertions(+)
 create mode 100644 arch/x86/crypto/aesni-intel_asm.S
 create mode 100644 arch/x86/crypto/aesni-intel_glue.c

(limited to 'arch')

diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 903de4aa509..ebe7deedd5b 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o
 obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
 obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
 obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o
+obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o
 
 obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
 
@@ -19,3 +20,5 @@ salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o
 aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o
 twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
 salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o
+
+aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
new file mode 100644
index 00000000000..caba9960170
--- /dev/null
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -0,0 +1,896 @@
+/*
+ * Implement AES algorithm in Intel AES-NI instructions.
+ *
+ * The white paper of AES-NI instructions can be downloaded from:
+ *   http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf
+ *
+ * Copyright (C) 2008, Intel Corp.
+ *    Author: Huang Ying <ying.huang@intel.com>
+ *            Vinodh Gopal <vinodh.gopal@intel.com>
+ *            Kahraman Akdemir
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+
+.text
+
+#define STATE1	%xmm0
+#define STATE2	%xmm4
+#define STATE3	%xmm5
+#define STATE4	%xmm6
+#define STATE	STATE1
+#define IN1	%xmm1
+#define IN2	%xmm7
+#define IN3	%xmm8
+#define IN4	%xmm9
+#define IN	IN1
+#define KEY	%xmm2
+#define IV	%xmm3
+
+#define KEYP	%rdi
+#define OUTP	%rsi
+#define INP	%rdx
+#define LEN	%rcx
+#define IVP	%r8
+#define KLEN	%r9d
+#define T1	%r10
+#define TKEYP	T1
+#define T2	%r11
+
+_key_expansion_128:
+_key_expansion_256a:
+	pshufd $0b11111111, %xmm1, %xmm1
+	shufps $0b00010000, %xmm0, %xmm4
+	pxor %xmm4, %xmm0
+	shufps $0b10001100, %xmm0, %xmm4
+	pxor %xmm4, %xmm0
+	pxor %xmm1, %xmm0
+	movaps %xmm0, (%rcx)
+	add $0x10, %rcx
+	ret
+
+_key_expansion_192a:
+	pshufd $0b01010101, %xmm1, %xmm1
+	shufps $0b00010000, %xmm0, %xmm4
+	pxor %xmm4, %xmm0
+	shufps $0b10001100, %xmm0, %xmm4
+	pxor %xmm4, %xmm0
+	pxor %xmm1, %xmm0
+
+	movaps %xmm2, %xmm5
+	movaps %xmm2, %xmm6
+	pslldq $4, %xmm5
+	pshufd $0b11111111, %xmm0, %xmm3
+	pxor %xmm3, %xmm2
+	pxor %xmm5, %xmm2
+
+	movaps %xmm0, %xmm1
+	shufps $0b01000100, %xmm0, %xmm6
+	movaps %xmm6, (%rcx)
+	shufps $0b01001110, %xmm2, %xmm1
+	movaps %xmm1, 16(%rcx)
+	add $0x20, %rcx
+	ret
+
+_key_expansion_192b:
+	pshufd $0b01010101, %xmm1, %xmm1
+	shufps $0b00010000, %xmm0, %xmm4
+	pxor %xmm4, %xmm0
+	shufps $0b10001100, %xmm0, %xmm4
+	pxor %xmm4, %xmm0
+	pxor %xmm1, %xmm0
+
+	movaps %xmm2, %xmm5
+	pslldq $4, %xmm5
+	pshufd $0b11111111, %xmm0, %xmm3
+	pxor %xmm3, %xmm2
+	pxor %xmm5, %xmm2
+
+	movaps %xmm0, (%rcx)
+	add $0x10, %rcx
+	ret
+
+_key_expansion_256b:
+	pshufd $0b10101010, %xmm1, %xmm1
+	shufps $0b00010000, %xmm2, %xmm4
+	pxor %xmm4, %xmm2
+	shufps $0b10001100, %xmm2, %xmm4
+	pxor %xmm4, %xmm2
+	pxor %xmm1, %xmm2
+	movaps %xmm2, (%rcx)
+	add $0x10, %rcx
+	ret
+
+/*
+ * int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key,
+ *                   unsigned int key_len)
+ */
+ENTRY(aesni_set_key)
+	movups (%rsi), %xmm0		# user key (first 16 bytes)
+	movaps %xmm0, (%rdi)
+	lea 0x10(%rdi), %rcx		# key addr
+	movl %edx, 480(%rdi)
+	pxor %xmm4, %xmm4		# xmm4 is assumed 0 in _key_expansion_x
+	cmp $24, %dl
+	jb .Lenc_key128
+	je .Lenc_key192
+	movups 0x10(%rsi), %xmm2	# other user key
+	movaps %xmm2, (%rcx)
+	add $0x10, %rcx
+	# aeskeygenassist $0x1, %xmm2, %xmm1	# round 1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01
+	call _key_expansion_256a
+	# aeskeygenassist $0x1, %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01
+	call _key_expansion_256b
+	# aeskeygenassist $0x2, %xmm2, %xmm1	# round 2
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02
+	call _key_expansion_256a
+	# aeskeygenassist $0x2, %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02
+	call _key_expansion_256b
+	# aeskeygenassist $0x4, %xmm2, %xmm1	# round 3
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04
+	call _key_expansion_256a
+	# aeskeygenassist $0x4, %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04
+	call _key_expansion_256b
+	# aeskeygenassist $0x8, %xmm2, %xmm1	# round 4
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08
+	call _key_expansion_256a
+	# aeskeygenassist $0x8, %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08
+	call _key_expansion_256b
+	# aeskeygenassist $0x10, %xmm2, %xmm1	# round 5
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10
+	call _key_expansion_256a
+	# aeskeygenassist $0x10, %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10
+	call _key_expansion_256b
+	# aeskeygenassist $0x20, %xmm2, %xmm1	# round 6
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20
+	call _key_expansion_256a
+	# aeskeygenassist $0x20, %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20
+	call _key_expansion_256b
+	# aeskeygenassist $0x40, %xmm2, %xmm1	# round 7
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40
+	call _key_expansion_256a
+	jmp .Ldec_key
+.Lenc_key192:
+	movq 0x10(%rsi), %xmm2		# other user key
+	# aeskeygenassist $0x1, %xmm2, %xmm1	# round 1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01
+	call _key_expansion_192a
+	# aeskeygenassist $0x2, %xmm2, %xmm1	# round 2
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02
+	call _key_expansion_192b
+	# aeskeygenassist $0x4, %xmm2, %xmm1	# round 3
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04
+	call _key_expansion_192a
+	# aeskeygenassist $0x8, %xmm2, %xmm1	# round 4
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08
+	call _key_expansion_192b
+	# aeskeygenassist $0x10, %xmm2, %xmm1	# round 5
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10
+	call _key_expansion_192a
+	# aeskeygenassist $0x20, %xmm2, %xmm1	# round 6
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20
+	call _key_expansion_192b
+	# aeskeygenassist $0x40, %xmm2, %xmm1	# round 7
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40
+	call _key_expansion_192a
+	# aeskeygenassist $0x80, %xmm2, %xmm1	# round 8
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x80
+	call _key_expansion_192b
+	jmp .Ldec_key
+.Lenc_key128:
+	# aeskeygenassist $0x1, %xmm0, %xmm1	# round 1
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01
+	call _key_expansion_128
+	# aeskeygenassist $0x2, %xmm0, %xmm1	# round 2
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02
+	call _key_expansion_128
+	# aeskeygenassist $0x4, %xmm0, %xmm1	# round 3
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04
+	call _key_expansion_128
+	# aeskeygenassist $0x8, %xmm0, %xmm1	# round 4
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08
+	call _key_expansion_128
+	# aeskeygenassist $0x10, %xmm0, %xmm1	# round 5
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10
+	call _key_expansion_128
+	# aeskeygenassist $0x20, %xmm0, %xmm1	# round 6
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20
+	call _key_expansion_128
+	# aeskeygenassist $0x40, %xmm0, %xmm1	# round 7
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x40
+	call _key_expansion_128
+	# aeskeygenassist $0x80, %xmm0, %xmm1	# round 8
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x80
+	call _key_expansion_128
+	# aeskeygenassist $0x1b, %xmm0, %xmm1	# round 9
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x1b
+	call _key_expansion_128
+	# aeskeygenassist $0x36, %xmm0, %xmm1	# round 10
+	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x36
+	call _key_expansion_128
+.Ldec_key:
+	sub $0x10, %rcx
+	movaps (%rdi), %xmm0
+	movaps (%rcx), %xmm1
+	movaps %xmm0, 240(%rcx)
+	movaps %xmm1, 240(%rdi)
+	add $0x10, %rdi
+	lea 240-16(%rcx), %rsi
+.align 4
+.Ldec_key_loop:
+	movaps (%rdi), %xmm0
+	# aesimc %xmm0, %xmm1
+	.byte 0x66, 0x0f, 0x38, 0xdb, 0xc8
+	movaps %xmm1, (%rsi)
+	add $0x10, %rdi
+	sub $0x10, %rsi
+	cmp %rcx, %rdi
+	jb .Ldec_key_loop
+	xor %rax, %rax
+	ret
+
+/*
+ * void aesni_enc(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src)
+ */
+ENTRY(aesni_enc)
+	movl 480(KEYP), KLEN		# key length
+	movups (INP), STATE		# input
+	call _aesni_enc1
+	movups STATE, (OUTP)		# output
+	ret
+
+/*
+ * _aesni_enc1:		internal ABI
+ * input:
+ *	KEYP:		key struct pointer
+ *	KLEN:		round count
+ *	STATE:		initial state (input)
+ * output:
+ *	STATE:		finial state (output)
+ * changed:
+ *	KEY
+ *	TKEYP (T1)
+ */
+_aesni_enc1:
+	movaps (KEYP), KEY		# key
+	mov KEYP, TKEYP
+	pxor KEY, STATE		# round 0
+	add $0x30, TKEYP
+	cmp $24, KLEN
+	jb .Lenc128
+	lea 0x20(TKEYP), TKEYP
+	je .Lenc192
+	add $0x20, TKEYP
+	movaps -0x60(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps -0x50(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+.align 4
+.Lenc192:
+	movaps -0x40(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps -0x30(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+.align 4
+.Lenc128:
+	movaps -0x20(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps -0x10(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps (TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x10(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x20(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x30(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x40(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x50(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x60(TKEYP), KEY
+	# aesenc KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	movaps 0x70(TKEYP), KEY
+	# aesenclast KEY, STATE	# last round
+	.byte 0x66, 0x0f, 0x38, 0xdd, 0xc2
+	ret
+
+/*
+ * _aesni_enc4:	internal ABI
+ * input:
+ *	KEYP:		key struct pointer
+ *	KLEN:		round count
+ *	STATE1:		initial state (input)
+ *	STATE2
+ *	STATE3
+ *	STATE4
+ * output:
+ *	STATE1:		finial state (output)
+ *	STATE2
+ *	STATE3
+ *	STATE4
+ * changed:
+ *	KEY
+ *	TKEYP (T1)
+ */
+_aesni_enc4:
+	movaps (KEYP), KEY		# key
+	mov KEYP, TKEYP
+	pxor KEY, STATE1		# round 0
+	pxor KEY, STATE2
+	pxor KEY, STATE3
+	pxor KEY, STATE4
+	add $0x30, TKEYP
+	cmp $24, KLEN
+	jb .L4enc128
+	lea 0x20(TKEYP), TKEYP
+	je .L4enc192
+	add $0x20, TKEYP
+	movaps -0x60(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps -0x50(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+#.align 4
+.L4enc192:
+	movaps -0x40(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps -0x30(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+#.align 4
+.L4enc128:
+	movaps -0x20(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps -0x10(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps (TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x10(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x20(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x30(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x40(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x50(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x60(TKEYP), KEY
+	# aesenc KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	# aesenc KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
+	# aesenc KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
+	# aesenc KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	movaps 0x70(TKEYP), KEY
+	# aesenclast KEY, STATE1	# last round
+	.byte 0x66, 0x0f, 0x38, 0xdd, 0xc2
+	# aesenclast KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdd, 0xe2
+	# aesenclast KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdd, 0xea
+	# aesenclast KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdd, 0xf2
+	ret
+
+/*
+ * void aesni_dec (struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src)
+ */
+ENTRY(aesni_dec)
+	mov 480(KEYP), KLEN		# key length
+	add $240, KEYP
+	movups (INP), STATE		# input
+	call _aesni_dec1
+	movups STATE, (OUTP)		#output
+	ret
+
+/*
+ * _aesni_dec1:		internal ABI
+ * input:
+ *	KEYP:		key struct pointer
+ *	KLEN:		key length
+ *	STATE:		initial state (input)
+ * output:
+ *	STATE:		finial state (output)
+ * changed:
+ *	KEY
+ *	TKEYP (T1)
+ */
+_aesni_dec1:
+	movaps (KEYP), KEY		# key
+	mov KEYP, TKEYP
+	pxor KEY, STATE		# round 0
+	add $0x30, TKEYP
+	cmp $24, KLEN
+	jb .Ldec128
+	lea 0x20(TKEYP), TKEYP
+	je .Ldec192
+	add $0x20, TKEYP
+	movaps -0x60(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps -0x50(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+.align 4
+.Ldec192:
+	movaps -0x40(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps -0x30(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+.align 4
+.Ldec128:
+	movaps -0x20(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps -0x10(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps (TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x10(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x20(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x30(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x40(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x50(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x60(TKEYP), KEY
+	# aesdec KEY, STATE
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	movaps 0x70(TKEYP), KEY
+	# aesdeclast KEY, STATE		# last round
+	.byte 0x66, 0x0f, 0x38, 0xdf, 0xc2
+	ret
+
+/*
+ * _aesni_dec4:	internal ABI
+ * input:
+ *	KEYP:		key struct pointer
+ *	KLEN:		key length
+ *	STATE1:		initial state (input)
+ *	STATE2
+ *	STATE3
+ *	STATE4
+ * output:
+ *	STATE1:		finial state (output)
+ *	STATE2
+ *	STATE3
+ *	STATE4
+ * changed:
+ *	KEY
+ *	TKEYP (T1)
+ */
+_aesni_dec4:
+	movaps (KEYP), KEY		# key
+	mov KEYP, TKEYP
+	pxor KEY, STATE1		# round 0
+	pxor KEY, STATE2
+	pxor KEY, STATE3
+	pxor KEY, STATE4
+	add $0x30, TKEYP
+	cmp $24, KLEN
+	jb .L4dec128
+	lea 0x20(TKEYP), TKEYP
+	je .L4dec192
+	add $0x20, TKEYP
+	movaps -0x60(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps -0x50(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+.align 4
+.L4dec192:
+	movaps -0x40(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps -0x30(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+.align 4
+.L4dec128:
+	movaps -0x20(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps -0x10(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps (TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x10(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x20(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x30(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x40(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x50(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x60(TKEYP), KEY
+	# aesdec KEY, STATE1
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	# aesdec KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
+	# aesdec KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
+	# aesdec KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	movaps 0x70(TKEYP), KEY
+	# aesdeclast KEY, STATE1	# last round
+	.byte 0x66, 0x0f, 0x38, 0xdf, 0xc2
+	# aesdeclast KEY, STATE2
+	.byte 0x66, 0x0f, 0x38, 0xdf, 0xe2
+	# aesdeclast KEY, STATE3
+	.byte 0x66, 0x0f, 0x38, 0xdf, 0xea
+	# aesdeclast KEY, STATE4
+	.byte 0x66, 0x0f, 0x38, 0xdf, 0xf2
+	ret
+
+/*
+ * void aesni_ecb_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src,
+ *		      size_t len)
+ */
+ENTRY(aesni_ecb_enc)
+	test LEN, LEN		# check length
+	jz .Lecb_enc_ret
+	mov 480(KEYP), KLEN
+	cmp $16, LEN
+	jb .Lecb_enc_ret
+	cmp $64, LEN
+	jb .Lecb_enc_loop1
+.align 4
+.Lecb_enc_loop4:
+	movups (INP), STATE1
+	movups 0x10(INP), STATE2
+	movups 0x20(INP), STATE3
+	movups 0x30(INP), STATE4
+	call _aesni_enc4
+	movups STATE1, (OUTP)
+	movups STATE2, 0x10(OUTP)
+	movups STATE3, 0x20(OUTP)
+	movups STATE4, 0x30(OUTP)
+	sub $64, LEN
+	add $64, INP
+	add $64, OUTP
+	cmp $64, LEN
+	jge .Lecb_enc_loop4
+	cmp $16, LEN
+	jb .Lecb_enc_ret
+.align 4
+.Lecb_enc_loop1:
+	movups (INP), STATE1
+	call _aesni_enc1
+	movups STATE1, (OUTP)
+	sub $16, LEN
+	add $16, INP
+	add $16, OUTP
+	cmp $16, LEN
+	jge .Lecb_enc_loop1
+.Lecb_enc_ret:
+	ret
+
+/*
+ * void aesni_ecb_dec(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src,
+ *		      size_t len);
+ */
+ENTRY(aesni_ecb_dec)
+	test LEN, LEN
+	jz .Lecb_dec_ret
+	mov 480(KEYP), KLEN
+	add $240, KEYP
+	cmp $16, LEN
+	jb .Lecb_dec_ret
+	cmp $64, LEN
+	jb .Lecb_dec_loop1
+.align 4
+.Lecb_dec_loop4:
+	movups (INP), STATE1
+	movups 0x10(INP), STATE2
+	movups 0x20(INP), STATE3
+	movups 0x30(INP), STATE4
+	call _aesni_dec4
+	movups STATE1, (OUTP)
+	movups STATE2, 0x10(OUTP)
+	movups STATE3, 0x20(OUTP)
+	movups STATE4, 0x30(OUTP)
+	sub $64, LEN
+	add $64, INP
+	add $64, OUTP
+	cmp $64, LEN
+	jge .Lecb_dec_loop4
+	cmp $16, LEN
+	jb .Lecb_dec_ret
+.align 4
+.Lecb_dec_loop1:
+	movups (INP), STATE1
+	call _aesni_dec1
+	movups STATE1, (OUTP)
+	sub $16, LEN
+	add $16, INP
+	add $16, OUTP
+	cmp $16, LEN
+	jge .Lecb_dec_loop1
+.Lecb_dec_ret:
+	ret
+
+/*
+ * void aesni_cbc_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src,
+ *		      size_t len, u8 *iv)
+ */
+ENTRY(aesni_cbc_enc)
+	cmp $16, LEN
+	jb .Lcbc_enc_ret
+	mov 480(KEYP), KLEN
+	movups (IVP), STATE	# load iv as initial state
+.align 4
+.Lcbc_enc_loop:
+	movups (INP), IN	# load input
+	pxor IN, STATE
+	call _aesni_enc1
+	movups STATE, (OUTP)	# store output
+	sub $16, LEN
+	add $16, INP
+	add $16, OUTP
+	cmp $16, LEN
+	jge .Lcbc_enc_loop
+	movups STATE, (IVP)
+.Lcbc_enc_ret:
+	ret
+
+/*
+ * void aesni_cbc_dec(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src,
+ *		      size_t len, u8 *iv)
+ */
+ENTRY(aesni_cbc_dec)
+	cmp $16, LEN
+	jb .Lcbc_dec_ret
+	mov 480(KEYP), KLEN
+	add $240, KEYP
+	movups (IVP), IV
+	cmp $64, LEN
+	jb .Lcbc_dec_loop1
+.align 4
+.Lcbc_dec_loop4:
+	movups (INP), IN1
+	movaps IN1, STATE1
+	movups 0x10(INP), IN2
+	movaps IN2, STATE2
+	movups 0x20(INP), IN3
+	movaps IN3, STATE3
+	movups 0x30(INP), IN4
+	movaps IN4, STATE4
+	call _aesni_dec4
+	pxor IV, STATE1
+	pxor IN1, STATE2
+	pxor IN2, STATE3
+	pxor IN3, STATE4
+	movaps IN4, IV
+	movups STATE1, (OUTP)
+	movups STATE2, 0x10(OUTP)
+	movups STATE3, 0x20(OUTP)
+	movups STATE4, 0x30(OUTP)
+	sub $64, LEN
+	add $64, INP
+	add $64, OUTP
+	cmp $64, LEN
+	jge .Lcbc_dec_loop4
+	cmp $16, LEN
+	jb .Lcbc_dec_ret
+.align 4
+.Lcbc_dec_loop1:
+	movups (INP), IN
+	movaps IN, STATE
+	call _aesni_dec1
+	pxor IV, STATE
+	movups STATE, (OUTP)
+	movaps IN, IV
+	sub $16, LEN
+	add $16, INP
+	add $16, OUTP
+	cmp $16, LEN
+	jge .Lcbc_dec_loop1
+	movups IV, (IVP)
+.Lcbc_dec_ret:
+	ret
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
new file mode 100644
index 00000000000..02af0af6549
--- /dev/null
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -0,0 +1,461 @@
+/*
+ * Support for Intel AES-NI instructions. This file contains glue
+ * code, the real AES implementation is in intel-aes_asm.S.
+ *
+ * Copyright (C) 2008, Intel Corp.
+ *    Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/hardirq.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/err.h>
+#include <crypto/algapi.h>
+#include <crypto/aes.h>
+#include <crypto/cryptd.h>
+#include <asm/i387.h>
+#include <asm/aes.h>
+
+struct async_aes_ctx {
+	struct cryptd_ablkcipher *cryptd_tfm;
+};
+
+#define AESNI_ALIGN	16
+#define AES_BLOCK_MASK	(~(AES_BLOCK_SIZE-1))
+
+asmlinkage int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key,
+			     unsigned int key_len);
+asmlinkage void aesni_enc(struct crypto_aes_ctx *ctx, u8 *out,
+			  const u8 *in);
+asmlinkage void aesni_dec(struct crypto_aes_ctx *ctx, u8 *out,
+			  const u8 *in);
+asmlinkage void aesni_ecb_enc(struct crypto_aes_ctx *ctx, u8 *out,
+			      const u8 *in, unsigned int len);
+asmlinkage void aesni_ecb_dec(struct crypto_aes_ctx *ctx, u8 *out,
+			      const u8 *in, unsigned int len);
+asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out,
+			      const u8 *in, unsigned int len, u8 *iv);
+asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
+			      const u8 *in, unsigned int len, u8 *iv);
+
+static inline int kernel_fpu_using(void)
+{
+	if (in_interrupt() && !(read_cr0() & X86_CR0_TS))
+		return 1;
+	return 0;
+}
+
+static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
+{
+	unsigned long addr = (unsigned long)raw_ctx;
+	unsigned long align = AESNI_ALIGN;
+
+	if (align <= crypto_tfm_ctx_alignment())
+		align = 1;
+	return (struct crypto_aes_ctx *)ALIGN(addr, align);
+}
+
+static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx,
+			      const u8 *in_key, unsigned int key_len)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(raw_ctx);
+	u32 *flags = &tfm->crt_flags;
+	int err;
+
+	if (key_len != AES_KEYSIZE_128 && key_len != AES_KEYSIZE_192 &&
+	    key_len != AES_KEYSIZE_256) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	if (kernel_fpu_using())
+		err = crypto_aes_expand_key(ctx, in_key, key_len);
+	else {
+		kernel_fpu_begin();
+		err = aesni_set_key(ctx, in_key, key_len);
+		kernel_fpu_end();
+	}
+
+	return err;
+}
+
+static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+		       unsigned int key_len)
+{
+	return aes_set_key_common(tfm, crypto_tfm_ctx(tfm), in_key, key_len);
+}
+
+static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+	if (kernel_fpu_using())
+		crypto_aes_encrypt_x86(ctx, dst, src);
+	else {
+		kernel_fpu_begin();
+		aesni_enc(ctx, dst, src);
+		kernel_fpu_end();
+	}
+}
+
+static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
+
+	if (kernel_fpu_using())
+		crypto_aes_decrypt_x86(ctx, dst, src);
+	else {
+		kernel_fpu_begin();
+		aesni_dec(ctx, dst, src);
+		kernel_fpu_end();
+	}
+}
+
+static struct crypto_alg aesni_alg = {
+	.cra_name		= "aes",
+	.cra_driver_name	= "aes-aesni",
+	.cra_priority		= 300,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+	.cra_alignmask		= 0,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(aesni_alg.cra_list),
+	.cra_u	= {
+		.cipher	= {
+			.cia_min_keysize	= AES_MIN_KEY_SIZE,
+			.cia_max_keysize	= AES_MAX_KEY_SIZE,
+			.cia_setkey		= aes_set_key,
+			.cia_encrypt		= aes_encrypt,
+			.cia_decrypt		= aes_decrypt
+		}
+	}
+};
+
+static int ecb_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm));
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	kernel_fpu_begin();
+	while ((nbytes = walk.nbytes)) {
+		aesni_ecb_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+			      nbytes & AES_BLOCK_MASK);
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	kernel_fpu_end();
+
+	return err;
+}
+
+static int ecb_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm));
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	kernel_fpu_begin();
+	while ((nbytes = walk.nbytes)) {
+		aesni_ecb_dec(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+			      nbytes & AES_BLOCK_MASK);
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	kernel_fpu_end();
+
+	return err;
+}
+
+static struct crypto_alg blk_ecb_alg = {
+	.cra_name		= "__ecb-aes-aesni",
+	.cra_driver_name	= "__driver-ecb-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(blk_ecb_alg.cra_list),
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.setkey		= aes_set_key,
+			.encrypt	= ecb_encrypt,
+			.decrypt	= ecb_decrypt,
+		},
+	},
+};
+
+static int cbc_encrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm));
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	kernel_fpu_begin();
+	while ((nbytes = walk.nbytes)) {
+		aesni_cbc_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+			      nbytes & AES_BLOCK_MASK, walk.iv);
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	kernel_fpu_end();
+
+	return err;
+}
+
+static int cbc_decrypt(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm));
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt(desc, &walk);
+
+	kernel_fpu_begin();
+	while ((nbytes = walk.nbytes)) {
+		aesni_cbc_dec(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+			      nbytes & AES_BLOCK_MASK, walk.iv);
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	kernel_fpu_end();
+
+	return err;
+}
+
+static struct crypto_alg blk_cbc_alg = {
+	.cra_name		= "__cbc-aes-aesni",
+	.cra_driver_name	= "__driver-cbc-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(blk_cbc_alg.cra_list),
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.setkey		= aes_set_key,
+			.encrypt	= cbc_encrypt,
+			.decrypt	= cbc_decrypt,
+		},
+	},
+};
+
+static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
+			unsigned int key_len)
+{
+	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+
+	return crypto_ablkcipher_setkey(&ctx->cryptd_tfm->base, key, key_len);
+}
+
+static int ablk_encrypt(struct ablkcipher_request *req)
+{
+	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+
+	if (kernel_fpu_using()) {
+		struct ablkcipher_request *cryptd_req =
+			ablkcipher_request_ctx(req);
+		memcpy(cryptd_req, req, sizeof(*req));
+		ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
+		return crypto_ablkcipher_encrypt(cryptd_req);
+	} else {
+		struct blkcipher_desc desc;
+		desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm);
+		desc.info = req->info;
+		desc.flags = 0;
+		return crypto_blkcipher_crt(desc.tfm)->encrypt(
+			&desc, req->dst, req->src, req->nbytes);
+	}
+}
+
+static int ablk_decrypt(struct ablkcipher_request *req)
+{
+	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+
+	if (kernel_fpu_using()) {
+		struct ablkcipher_request *cryptd_req =
+			ablkcipher_request_ctx(req);
+		memcpy(cryptd_req, req, sizeof(*req));
+		ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
+		return crypto_ablkcipher_decrypt(cryptd_req);
+	} else {
+		struct blkcipher_desc desc;
+		desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm);
+		desc.info = req->info;
+		desc.flags = 0;
+		return crypto_blkcipher_crt(desc.tfm)->decrypt(
+			&desc, req->dst, req->src, req->nbytes);
+	}
+}
+
+static void ablk_exit(struct crypto_tfm *tfm)
+{
+	struct async_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	cryptd_free_ablkcipher(ctx->cryptd_tfm);
+}
+
+static void ablk_init_common(struct crypto_tfm *tfm,
+			     struct cryptd_ablkcipher *cryptd_tfm)
+{
+	struct async_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	ctx->cryptd_tfm = cryptd_tfm;
+	tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) +
+		crypto_ablkcipher_reqsize(&cryptd_tfm->base);
+}
+
+static int ablk_ecb_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("__driver-ecb-aes-aesni", 0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_ecb_alg = {
+	.cra_name		= "ecb(aes)",
+	.cra_driver_name	= "ecb-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_ecb_alg.cra_list),
+	.cra_init		= ablk_ecb_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+
+static int ablk_cbc_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher("__driver-cbc-aes-aesni", 0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_cbc_alg = {
+	.cra_name		= "cbc(aes)",
+	.cra_driver_name	= "cbc-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_cbc_alg.cra_list),
+	.cra_init		= ablk_cbc_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= ablk_set_key,
+			.encrypt	= ablk_encrypt,
+			.decrypt	= ablk_decrypt,
+		},
+	},
+};
+
+static int __init aesni_init(void)
+{
+	int err;
+
+	if (!cpu_has_aes) {
+		printk(KERN_ERR "Intel AES-NI instructions are not detected.\n");
+		return -ENODEV;
+	}
+	if ((err = crypto_register_alg(&aesni_alg)))
+		goto aes_err;
+	if ((err = crypto_register_alg(&blk_ecb_alg)))
+		goto blk_ecb_err;
+	if ((err = crypto_register_alg(&blk_cbc_alg)))
+		goto blk_cbc_err;
+	if ((err = crypto_register_alg(&ablk_ecb_alg)))
+		goto ablk_ecb_err;
+	if ((err = crypto_register_alg(&ablk_cbc_alg)))
+		goto ablk_cbc_err;
+
+	return err;
+
+ablk_cbc_err:
+	crypto_unregister_alg(&ablk_ecb_alg);
+ablk_ecb_err:
+	crypto_unregister_alg(&blk_cbc_alg);
+blk_cbc_err:
+	crypto_unregister_alg(&blk_ecb_alg);
+blk_ecb_err:
+	crypto_unregister_alg(&aesni_alg);
+aes_err:
+	return err;
+}
+
+static void __exit aesni_exit(void)
+{
+	crypto_unregister_alg(&ablk_cbc_alg);
+	crypto_unregister_alg(&ablk_ecb_alg);
+	crypto_unregister_alg(&blk_cbc_alg);
+	crypto_unregister_alg(&blk_ecb_alg);
+	crypto_unregister_alg(&aesni_alg);
+}
+
+module_init(aesni_init);
+module_exit(aesni_exit);
+
+MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, Intel AES-NI instructions optimized");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("aes");
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 7301e60dc4a..0beba0d1468 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -213,6 +213,7 @@ extern const char * const x86_power_flags[32];
 #define cpu_has_xmm		boot_cpu_has(X86_FEATURE_XMM)
 #define cpu_has_xmm2		boot_cpu_has(X86_FEATURE_XMM2)
 #define cpu_has_xmm3		boot_cpu_has(X86_FEATURE_XMM3)
+#define cpu_has_aes		boot_cpu_has(X86_FEATURE_AES)
 #define cpu_has_ht		boot_cpu_has(X86_FEATURE_HT)
 #define cpu_has_mp		boot_cpu_has(X86_FEATURE_MP)
 #define cpu_has_nx		boot_cpu_has(X86_FEATURE_NX)
-- 
cgit v1.2.3


From 563f346d04e8373739240604a51ce8529dd9f07e Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Sun, 18 Jan 2009 20:33:33 +1100
Subject: crypto: sha-s390 - Switch to shash

This patch converts the S390 sha algorithms to the new shash interface.

With fixes by Jan Glauber.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha.h         |  6 ++--
 arch/s390/crypto/sha1_s390.c   | 40 +++++++++++----------
 arch/s390/crypto/sha256_s390.c | 40 +++++++++++----------
 arch/s390/crypto/sha512_s390.c | 80 ++++++++++++++++++++++--------------------
 arch/s390/crypto/sha_common.c  | 20 ++++++-----
 5 files changed, 100 insertions(+), 86 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha.h b/arch/s390/crypto/sha.h
index 1ceafa571ea..f4e9dc71675 100644
--- a/arch/s390/crypto/sha.h
+++ b/arch/s390/crypto/sha.h
@@ -29,7 +29,9 @@ struct s390_sha_ctx {
 	int func;		/* KIMD function to use */
 };
 
-void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len);
-void s390_sha_final(struct crypto_tfm *tfm, u8 *out);
+struct shash_desc;
+
+int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len);
+int s390_sha_final(struct shash_desc *desc, u8 *out);
 
 #endif
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index b3cb5a89b00..e85ba348722 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -23,17 +23,17 @@
  * any later version.
  *
  */
+#include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/crypto.h>
 #include <crypto/sha.h>
 
 #include "crypt_s390.h"
 #include "sha.h"
 
-static void sha1_init(struct crypto_tfm *tfm)
+static int sha1_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 
 	sctx->state[0] = SHA1_H0;
 	sctx->state[1] = SHA1_H1;
@@ -42,34 +42,36 @@ static void sha1_init(struct crypto_tfm *tfm)
 	sctx->state[4] = SHA1_H4;
 	sctx->count = 0;
 	sctx->func = KIMD_SHA_1;
+
+	return 0;
 }
 
-static struct crypto_alg alg = {
-	.cra_name	=	"sha1",
-	.cra_driver_name=	"sha1-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA1_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA1_DIGEST_SIZE,
-	.dia_init	=	sha1_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg alg = {
+	.digestsize	=	SHA1_DIGEST_SIZE,
+	.init		=	sha1_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha1",
+		.cra_driver_name=	"sha1-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA1_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 static int __init sha1_s390_init(void)
 {
 	if (!crypt_s390_func_available(KIMD_SHA_1))
 		return -EOPNOTSUPP;
-	return crypto_register_alg(&alg);
+	return crypto_register_shash(&alg);
 }
 
 static void __exit sha1_s390_fini(void)
 {
-	crypto_unregister_alg(&alg);
+	crypto_unregister_shash(&alg);
 }
 
 module_init(sha1_s390_init);
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 19c03fb6ba7..f9fefc56963 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -16,17 +16,17 @@
  * any later version.
  *
  */
+#include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/crypto.h>
 #include <crypto/sha.h>
 
 #include "crypt_s390.h"
 #include "sha.h"
 
-static void sha256_init(struct crypto_tfm *tfm)
+static int sha256_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 
 	sctx->state[0] = SHA256_H0;
 	sctx->state[1] = SHA256_H1;
@@ -38,22 +38,24 @@ static void sha256_init(struct crypto_tfm *tfm)
 	sctx->state[7] = SHA256_H7;
 	sctx->count = 0;
 	sctx->func = KIMD_SHA_256;
+
+	return 0;
 }
 
-static struct crypto_alg alg = {
-	.cra_name	=	"sha256",
-	.cra_driver_name =	"sha256-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA256_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA256_DIGEST_SIZE,
-	.dia_init	=	sha256_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg alg = {
+	.digestsize	=	SHA256_DIGEST_SIZE,
+	.init		=	sha256_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha256",
+		.cra_driver_name=	"sha256-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA256_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 static int sha256_s390_init(void)
@@ -61,12 +63,12 @@ static int sha256_s390_init(void)
 	if (!crypt_s390_func_available(KIMD_SHA_256))
 		return -EOPNOTSUPP;
 
-	return crypto_register_alg(&alg);
+	return crypto_register_shash(&alg);
 }
 
 static void __exit sha256_s390_fini(void)
 {
-	crypto_unregister_alg(&alg);
+	crypto_unregister_shash(&alg);
 }
 
 module_init(sha256_s390_init);
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index 23c7861f6ae..420acf41b72 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -12,16 +12,16 @@
  * any later version.
  *
  */
+#include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/crypto.h>
 
 #include "sha.h"
 #include "crypt_s390.h"
 
-static void sha512_init(struct crypto_tfm *tfm)
+static int sha512_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
 
 	*(__u64 *)&ctx->state[0] = 0x6a09e667f3bcc908ULL;
 	*(__u64 *)&ctx->state[2] = 0xbb67ae8584caa73bULL;
@@ -33,29 +33,31 @@ static void sha512_init(struct crypto_tfm *tfm)
 	*(__u64 *)&ctx->state[14] = 0x5be0cd19137e2179ULL;
 	ctx->count = 0;
 	ctx->func = KIMD_SHA_512;
+
+	return 0;
 }
 
-static struct crypto_alg sha512_alg = {
-	.cra_name	=	"sha512",
-	.cra_driver_name =	"sha512-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA512_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(sha512_alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA512_DIGEST_SIZE,
-	.dia_init	=	sha512_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg sha512_alg = {
+	.digestsize	=	SHA512_DIGEST_SIZE,
+	.init		=	sha512_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha512",
+		.cra_driver_name=	"sha512-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA512_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 MODULE_ALIAS("sha512");
 
-static void sha384_init(struct crypto_tfm *tfm)
+static int sha384_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
 
 	*(__u64 *)&ctx->state[0] = 0xcbbb9d5dc1059ed8ULL;
 	*(__u64 *)&ctx->state[2] = 0x629a292a367cd507ULL;
@@ -67,22 +69,24 @@ static void sha384_init(struct crypto_tfm *tfm)
 	*(__u64 *)&ctx->state[14] = 0x47b5481dbefa4fa4ULL;
 	ctx->count = 0;
 	ctx->func = KIMD_SHA_512;
+
+	return 0;
 }
 
-static struct crypto_alg sha384_alg = {
-	.cra_name	=	"sha384",
-	.cra_driver_name =	"sha384-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA384_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(sha384_alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA384_DIGEST_SIZE,
-	.dia_init	=	sha384_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg sha384_alg = {
+	.digestsize	=	SHA384_DIGEST_SIZE,
+	.init		=	sha384_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha384",
+		.cra_driver_name=	"sha384-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 MODULE_ALIAS("sha384");
@@ -93,18 +97,18 @@ static int __init init(void)
 
 	if (!crypt_s390_func_available(KIMD_SHA_512))
 		return -EOPNOTSUPP;
-	if ((ret = crypto_register_alg(&sha512_alg)) < 0)
+	if ((ret = crypto_register_shash(&sha512_alg)) < 0)
 		goto out;
-	if ((ret = crypto_register_alg(&sha384_alg)) < 0)
-		crypto_unregister_alg(&sha512_alg);
+	if ((ret = crypto_register_shash(&sha384_alg)) < 0)
+		crypto_unregister_shash(&sha512_alg);
 out:
 	return ret;
 }
 
 static void __exit fini(void)
 {
-	crypto_unregister_alg(&sha512_alg);
-	crypto_unregister_alg(&sha384_alg);
+	crypto_unregister_shash(&sha512_alg);
+	crypto_unregister_shash(&sha384_alg);
 }
 
 module_init(init);
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index 9d6eb8c3d37..7903ec47e6b 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -13,14 +13,14 @@
  *
  */
 
-#include <linux/crypto.h>
+#include <crypto/internal/hash.h>
 #include "sha.h"
 #include "crypt_s390.h"
 
-void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
-	unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int bsize = crypto_shash_blocksize(desc->tfm);
 	unsigned int index;
 	int ret;
 
@@ -51,13 +51,15 @@ void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
 store:
 	if (len)
 		memcpy(ctx->buf + index , data, len);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_sha_update);
 
-void s390_sha_final(struct crypto_tfm *tfm, u8 *out)
+int s390_sha_final(struct shash_desc *desc, u8 *out)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
-	unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int bsize = crypto_shash_blocksize(desc->tfm);
 	u64 bits;
 	unsigned int index, end, plen;
 	int ret;
@@ -87,9 +89,11 @@ void s390_sha_final(struct crypto_tfm *tfm, u8 *out)
 	BUG_ON(ret != end);
 
 	/* copy digest to out */
-	memcpy(out, ctx->state, crypto_hash_digestsize(crypto_hash_cast(tfm)));
+	memcpy(out, ctx->state, crypto_shash_digestsize(desc->tfm));
 	/* wipe context */
 	memset(ctx, 0, sizeof *ctx);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_sha_final);
 
-- 
cgit v1.2.3


From 049359d655277c382683a6030ae0bac485568ffc Mon Sep 17 00:00:00 2001
From: James Hsiao <jhsiao@amcc.com>
Date: Thu, 5 Feb 2009 16:18:13 +1100
Subject: crypto: amcc - Add crypt4xx driver

This patch adds support for AMCC ppc4xx security device driver. This is the
initial release that includes the driver framework with AES and SHA1 algorithms
support.

The remaining algorithms will be released in the near future.

Signed-off-by: James Hsiao <jhsiao@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/powerpc/boot/dts/canyonlands.dts | 7 +++++++
 arch/powerpc/boot/dts/kilauea.dts     | 7 +++++++
 2 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 8b5ba8261a3..4447def69dc 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -127,6 +127,13 @@
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 2804444812e..5e6b08ff6f6 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -97,6 +97,13 @@
 				      0x6 0x4>;	/* ECC SEC Error */ 
 		};
 
+		CRYPTO: crypto@ef700000 {
+			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <0xef700000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x2>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
-- 
cgit v1.2.3


From 74019224ac34b044b44a31dd89a54e3477db4896 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 18 Feb 2009 12:23:29 +0100
Subject: timers: add mod_timer_pending()

Impact: new timer API

Based on an idea from Martin Josefsson with the help of
Patrick McHardy and Stephen Hemminger:

introduce the mod_timer_pending() API which is a mod_timer()
offspring that is an invariant on already removed timers.

(regular mod_timer() re-activates non-pending timers.)

This is useful for the networking code in that it can
allow unserialized mod_timer_pending() timer-forwarding
calls, but a single del_timer*() will stop the timer
from being reactivated again.

Also while at it:

- optimize the regular mod_timer() path some more, the
  timer-stat and a debug check was needlessly duplicated
  in __mod_timer().

- make the exports come straight after the function, as
  most other exports in timer.c already did.

- eliminate __mod_timer() as an external API, change the
  users to mod_timer().

The regular mod_timer() code path is not impacted
significantly, due to inlining optimizations and due to
the simplifications.

Based-on-patch-from: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 6a0ad196aeb..f085369301b 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -508,7 +508,7 @@ static void __spu_add_to_rq(struct spu_context *ctx)
 		list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]);
 		set_bit(ctx->prio, spu_prio->bitmap);
 		if (!spu_prio->nr_waiting++)
-			__mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
+			mod_timer(&spusched_timer, jiffies + SPUSCHED_TICK);
 	}
 }
 
-- 
cgit v1.2.3


From de5483029b8f18e23395d8fd4f4ef6ae15beb809 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Thu, 19 Feb 2009 12:20:17 +0530
Subject: x86: include/asm/processor.h remove double declaration of
 print_cpu_info

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index dabab1a19dd..72914d0315e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -403,7 +403,6 @@ DECLARE_PER_CPU(unsigned long, stack_canary);
 #endif
 #endif	/* X86_64 */
 
-extern void print_cpu_info(struct cpuinfo_x86 *);
 extern unsigned int xstate_size;
 extern void free_thread_xstate(struct task_struct *);
 extern struct kmem_cache *task_xstate_cachep;
-- 
cgit v1.2.3


From 71d8f9784a99991a7571dd20226f5f450dda7f34 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Wed, 18 Feb 2009 11:07:52 -0800
Subject: x86: syscalls.h: remove asmlinkage from declaration of
 sys_rt_sigreturn()

Impact: cleanup

asmlinkage for sys_rt_sigreturn() no longer exists in arch/x86/kernel/signal.c.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/syscalls.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 258ef730aaa..7043408f690 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -82,7 +82,7 @@ asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
 /* kernel/signal_64.c */
 asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
 				struct pt_regs *);
-asmlinkage long sys_rt_sigreturn(struct pt_regs *);
+long sys_rt_sigreturn(struct pt_regs *);
 
 /* kernel/sys_x86_64.c */
 asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
-- 
cgit v1.2.3


From bff595c15c92b9c5c8f3d32edefcef6c3cbdd59f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 16 Feb 2009 11:41:36 +0100
Subject: [ARM] 5383/2: unwind: Add core support for ARM stack unwinding

This patch adds the main functionality for parsing the stack unwinding
information generated by the ARM EABI toolchains. The unwinding
information consists of an index with a pair of words per function and a
table with unwinding instructions. For more information, see "Exception
Handling ABI for the ARM Architecture" at:

http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/vmlinux.lds.in |   5 +
 arch/arm/include/asm/unwind.h           |  69 +++++
 arch/arm/kernel/setup.c                 |   3 +
 arch/arm/kernel/traps.c                 |  10 +
 arch/arm/kernel/unwind.c                | 434 ++++++++++++++++++++++++++++++++
 arch/arm/kernel/vmlinux.lds.S           |  19 ++
 6 files changed, 540 insertions(+)
 create mode 100644 arch/arm/include/asm/unwind.h
 create mode 100644 arch/arm/kernel/unwind.c

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 153a07e7222..a5924b9b88b 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -11,6 +11,11 @@ OUTPUT_ARCH(arm)
 ENTRY(_start)
 SECTIONS
 {
+  /DISCARD/ : {
+    *(.ARM.exidx*)
+    *(.ARM.extab*)
+  }
+
   . = TEXT_START;
   _text = .;
 
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
new file mode 100644
index 00000000000..a5edf421005
--- /dev/null
+++ b/arch/arm/include/asm/unwind.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/include/asm/unwind.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNWIND_H
+#define __ASM_UNWIND_H
+
+#ifndef __ASSEMBLY__
+
+/* Unwind reason code according the the ARM EABI documents */
+enum unwind_reason_code {
+	URC_OK = 0,			/* operation completed successfully */
+	URC_CONTINUE_UNWIND = 8,
+	URC_FAILURE = 9			/* unspecified failure of some kind */
+};
+
+struct unwind_idx {
+	unsigned long addr;
+	unsigned long insn;
+};
+
+struct unwind_table {
+	struct list_head list;
+	struct unwind_idx *start;
+	struct unwind_idx *stop;
+	unsigned long begin_addr;
+	unsigned long end_addr;
+};
+
+extern struct unwind_table *unwind_table_add(unsigned long start,
+					     unsigned long size,
+					     unsigned long text_addr,
+					     unsigned long text_size);
+extern void unwind_table_del(struct unwind_table *tab);
+extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+
+#ifdef CONFIG_ARM_UNWIND
+extern int __init unwind_init(void);
+#else
+static inline int __init unwind_init(void)
+{
+	return 0;
+}
+#endif
+
+#endif	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARM_UNWIND
+#define UNWIND(code...)		code
+#else
+#define UNWIND(code...)
+#endif
+
+#endif	/* __ASM_UNWIND_H */
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 645ec743668..8d21427bb67 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -40,6 +40,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/traps.h>
+#include <asm/unwind.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -684,6 +685,8 @@ void __init setup_arch(char **cmdline_p)
 	struct machine_desc *mdesc;
 	char *from = default_command_line;
 
+	unwind_init();
+
 	setup_processor();
 	mdesc = setup_machine(machine_arch_type);
 	machine_name = mdesc->name;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f68ca0fb0ed..57eb0f6f600 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
 #include <asm/system.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
+#include <asm/unwind.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -61,6 +62,7 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
+#ifndef CONFIG_ARM_UNWIND
 /*
  * Stack pointers should always be within the kernels view of
  * physical memory.  If it is not there, then we can't dump
@@ -74,6 +76,7 @@ static int verify_stack(unsigned long sp)
 
 	return 0;
 }
+#endif
 
 /*
  * Dump out the contents of some memory nicely...
@@ -150,6 +153,12 @@ static void dump_instr(struct pt_regs *regs)
 	set_fs(fs);
 }
 
+#ifdef CONFIG_ARM_UNWIND
+static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+	unwind_backtrace(regs, tsk);
+}
+#else
 static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 {
 	unsigned int fp, mode;
@@ -184,6 +193,7 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 	if (ok)
 		c_backtrace(fp, mode);
 }
+#endif
 
 void dump_stack(void)
 {
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
new file mode 100644
index 00000000000..1dedc2c7ff4
--- /dev/null
+++ b/arch/arm/kernel/unwind.c
@@ -0,0 +1,434 @@
+/*
+ * arch/arm/kernel/unwind.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Stack unwinding support for ARM
+ *
+ * An ARM EABI version of gcc is required to generate the unwind
+ * tables. For information about the structure of the unwind tables,
+ * see "Exception Handling ABI for the ARM Architecture" at:
+ *
+ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include <asm/stacktrace.h>
+#include <asm/traps.h>
+#include <asm/unwind.h>
+
+/* Dummy functions to avoid linker complaints */
+void __aeabi_unwind_cpp_pr0(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0);
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1);
+
+void __aeabi_unwind_cpp_pr2(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
+
+struct unwind_ctrl_block {
+	unsigned long vrs[16];		/* virtual register set */
+	unsigned long *insn;		/* pointer to the current instructions word */
+	int entries;			/* number of entries left to interpret */
+	int byte;			/* current byte number in the instructions word */
+};
+
+enum regs {
+	FP = 11,
+	SP = 13,
+	LR = 14,
+	PC = 15
+};
+
+extern struct unwind_idx __start_unwind_idx[];
+extern struct unwind_idx __stop_unwind_idx[];
+
+static DEFINE_SPINLOCK(unwind_lock);
+static LIST_HEAD(unwind_tables);
+
+/* Convert a prel31 symbol to an absolute address */
+#define prel31_to_addr(ptr)				\
+({							\
+	/* sign-extend to 32 bits */			\
+	long offset = (((long)*(ptr)) << 1) >> 1;	\
+	(unsigned long)(ptr) + offset;			\
+})
+
+/*
+ * Binary search in the unwind index. The entries entries are
+ * guaranteed to be sorted in ascending order by the linker.
+ */
+static struct unwind_idx *search_index(unsigned long addr,
+				       struct unwind_idx *first,
+				       struct unwind_idx *last)
+{
+	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+
+	if (addr < first->addr) {
+		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+		return NULL;
+	} else if (addr >= last->addr)
+		return last;
+
+	while (first < last - 1) {
+		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+
+		if (addr < mid->addr)
+			last = mid;
+		else
+			first = mid;
+	}
+
+	return first;
+}
+
+static struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+	struct unwind_idx *idx = NULL;
+	unsigned long flags;
+
+	pr_debug("%s(%08lx)\n", __func__, addr);
+
+	if (core_kernel_text(addr))
+		/* main unwind table */
+		idx = search_index(addr, __start_unwind_idx,
+				   __stop_unwind_idx - 1);
+	else {
+		/* module unwind tables */
+		struct unwind_table *table;
+
+		spin_lock_irqsave(&unwind_lock, flags);
+		list_for_each_entry(table, &unwind_tables, list) {
+			if (addr >= table->begin_addr &&
+			    addr < table->end_addr) {
+				idx = search_index(addr, table->start,
+						   table->stop - 1);
+				break;
+			}
+		}
+		spin_unlock_irqrestore(&unwind_lock, flags);
+	}
+
+	pr_debug("%s: idx = %p\n", __func__, idx);
+	return idx;
+}
+
+static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long ret;
+
+	if (ctrl->entries <= 0) {
+		pr_warning("unwind: Corrupt unwind table\n");
+		return 0;
+	}
+
+	ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff;
+
+	if (ctrl->byte == 0) {
+		ctrl->insn++;
+		ctrl->entries--;
+		ctrl->byte = 3;
+	} else
+		ctrl->byte--;
+
+	return ret;
+}
+
+/*
+ * Execute the current unwind instruction.
+ */
+static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long insn = unwind_get_byte(ctrl);
+
+	pr_debug("%s: insn = %08lx\n", __func__, insn);
+
+	if ((insn & 0xc0) == 0x00)
+		ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
+	else if ((insn & 0xc0) == 0x40)
+		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
+	else if ((insn & 0xf0) == 0x80) {
+		unsigned long mask;
+		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+		int load_sp, reg = 4;
+
+		insn = (insn << 8) | unwind_get_byte(ctrl);
+		mask = insn & 0x0fff;
+		if (mask == 0) {
+			pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
+				   insn);
+			return -URC_FAILURE;
+		}
+
+		/* pop R4-R15 according to mask */
+		load_sp = mask & (1 << (13 - 4));
+		while (mask) {
+			if (mask & 1)
+				ctrl->vrs[reg] = *vsp++;
+			mask >>= 1;
+			reg++;
+		}
+		if (!load_sp)
+			ctrl->vrs[SP] = (unsigned long)vsp;
+	} else if ((insn & 0xf0) == 0x90 &&
+		   (insn & 0x0d) != 0x0d)
+		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
+	else if ((insn & 0xf0) == 0xa0) {
+		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+		int reg;
+
+		/* pop R4-R[4+bbb] */
+		for (reg = 4; reg <= 4 + (insn & 7); reg++)
+			ctrl->vrs[reg] = *vsp++;
+		if (insn & 0x80)
+			ctrl->vrs[14] = *vsp++;
+		ctrl->vrs[SP] = (unsigned long)vsp;
+	} else if (insn == 0xb0) {
+		ctrl->vrs[PC] = ctrl->vrs[LR];
+		/* no further processing */
+		ctrl->entries = 0;
+	} else if (insn == 0xb1) {
+		unsigned long mask = unwind_get_byte(ctrl);
+		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+		int reg = 0;
+
+		if (mask == 0 || mask & 0xf0) {
+			pr_warning("unwind: Spare encoding %04lx\n",
+			       (insn << 8) | mask);
+			return -URC_FAILURE;
+		}
+
+		/* pop R0-R3 according to mask */
+		while (mask) {
+			if (mask & 1)
+				ctrl->vrs[reg] = *vsp++;
+			mask >>= 1;
+			reg++;
+		}
+		ctrl->vrs[SP] = (unsigned long)vsp;
+	} else if (insn == 0xb2) {
+		unsigned long uleb128 = unwind_get_byte(ctrl);
+
+		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
+	} else {
+		pr_warning("unwind: Unhandled instruction %02lx\n", insn);
+		return -URC_FAILURE;
+	}
+
+	pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
+		 ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
+
+	return URC_OK;
+}
+
+/*
+ * Unwind a single frame starting with *sp for the symbol at *pc. It
+ * updates the *pc and *sp with the new values.
+ */
+int unwind_frame(struct stackframe *frame)
+{
+	unsigned long high, low;
+	struct unwind_idx *idx;
+	struct unwind_ctrl_block ctrl;
+
+	/* only go to a higher address on the stack */
+	low = frame->sp;
+	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+
+	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
+		 frame->pc, frame->lr, frame->sp);
+
+	if (!kernel_text_address(frame->pc))
+		return -URC_FAILURE;
+
+	idx = unwind_find_idx(frame->pc);
+	if (!idx) {
+		pr_warning("unwind: Index not found %08lx\n", frame->pc);
+		return -URC_FAILURE;
+	}
+
+	ctrl.vrs[FP] = frame->fp;
+	ctrl.vrs[SP] = frame->sp;
+	ctrl.vrs[LR] = frame->lr;
+	ctrl.vrs[PC] = 0;
+
+	if (idx->insn == 1)
+		/* can't unwind */
+		return -URC_FAILURE;
+	else if ((idx->insn & 0x80000000) == 0)
+		/* prel31 to the unwind table */
+		ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
+	else if ((idx->insn & 0xff000000) == 0x80000000)
+		/* only personality routine 0 supported in the index */
+		ctrl.insn = &idx->insn;
+	else {
+		pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
+			   idx->insn, idx);
+		return -URC_FAILURE;
+	}
+
+	/* check the personality routine */
+	if ((*ctrl.insn & 0xff000000) == 0x80000000) {
+		ctrl.byte = 2;
+		ctrl.entries = 1;
+	} else if ((*ctrl.insn & 0xff000000) == 0x81000000) {
+		ctrl.byte = 1;
+		ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
+	} else {
+		pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
+			   *ctrl.insn, ctrl.insn);
+		return -URC_FAILURE;
+	}
+
+	while (ctrl.entries > 0) {
+		int urc;
+
+		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+			return -URC_FAILURE;
+		urc = unwind_exec_insn(&ctrl);
+		if (urc < 0)
+			return urc;
+	}
+
+	if (ctrl.vrs[PC] == 0)
+		ctrl.vrs[PC] = ctrl.vrs[LR];
+
+	frame->fp = ctrl.vrs[FP];
+	frame->sp = ctrl.vrs[SP];
+	frame->lr = ctrl.vrs[LR];
+	frame->pc = ctrl.vrs[PC];
+
+	return URC_OK;
+}
+
+void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+	struct stackframe frame;
+	unsigned long high, low;
+	register unsigned long current_sp asm ("sp");
+
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (!tsk)
+		tsk = current;
+
+	if (regs) {
+		frame.fp = regs->ARM_fp;
+		frame.sp = regs->ARM_sp;
+		frame.lr = regs->ARM_lr;
+		frame.pc = regs->ARM_pc;
+	} else if (tsk == current) {
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.lr = (unsigned long)__builtin_return_address(0);
+		frame.pc = (unsigned long)unwind_backtrace;
+	} else {
+		/* task blocked in __switch_to */
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		/*
+		 * The function calling __switch_to cannot be a leaf function
+		 * so LR is recovered from the stack.
+		 */
+		frame.lr = 0;
+		frame.pc = thread_saved_pc(tsk);
+	}
+
+	low = frame.sp & ~(THREAD_SIZE - 1);
+	high = low + THREAD_SIZE;
+
+	while (1) {
+		int urc;
+		unsigned long where = frame.pc;
+
+		urc = unwind_frame(&frame);
+		if (urc < 0)
+			break;
+		dump_backtrace_entry(where, frame.pc, frame.sp - 4);
+	}
+}
+
+struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
+				      unsigned long text_addr,
+				      unsigned long text_size)
+{
+	unsigned long flags;
+	struct unwind_idx *idx;
+	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
+
+	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
+		 text_addr, text_size);
+
+	if (!tab)
+		return tab;
+
+	tab->start = (struct unwind_idx *)start;
+	tab->stop = (struct unwind_idx *)(start + size);
+	tab->begin_addr = text_addr;
+	tab->end_addr = text_addr + text_size;
+
+	/* Convert the symbol addresses to absolute values */
+	for (idx = tab->start; idx < tab->stop; idx++)
+		idx->addr = prel31_to_addr(&idx->addr);
+
+	spin_lock_irqsave(&unwind_lock, flags);
+	list_add_tail(&tab->list, &unwind_tables);
+	spin_unlock_irqrestore(&unwind_lock, flags);
+
+	return tab;
+}
+
+void unwind_table_del(struct unwind_table *tab)
+{
+	unsigned long flags;
+
+	if (!tab)
+		return;
+
+	spin_lock_irqsave(&unwind_lock, flags);
+	list_del(&tab->list);
+	spin_unlock_irqrestore(&unwind_lock, flags);
+
+	kfree(tab);
+}
+
+int __init unwind_init(void)
+{
+	struct unwind_idx *idx;
+
+	/* Convert the symbol addresses to absolute values */
+	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
+		idx->addr = prel31_to_addr(&idx->addr);
+
+	pr_debug("unwind: ARM stack unwinding initialised\n");
+
+	return 0;
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 00216071eaf..5f664599c94 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -80,6 +80,8 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.ARM.exidx.exit.text)
+		*(.ARM.extab.exit.text)
 #ifndef CONFIG_MMU
 		*(.fixup)
 		*(__ex_table)
@@ -110,6 +112,23 @@ SECTIONS
 
 	_etext = .;			/* End of text and rodata section */
 
+#ifdef CONFIG_ARM_UNWIND
+	/*
+	 * Stack unwinding tables
+	 */
+	. = ALIGN(8);
+	.ARM.unwind_idx : {
+		__start_unwind_idx = .;
+		*(.ARM.exidx*)
+		__stop_unwind_idx = .;
+	}
+	.ARM.unwind_tab : {
+		__start_unwind_tab = .;
+		*(.ARM.extab*)
+		__stop_unwind_tab = .;
+	}
+#endif
+
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
 	. = PAGE_OFFSET + TEXT_OFFSET;
-- 
cgit v1.2.3


From 2e1926e7b5d39eb31880152d636e8d8d011888cb Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 11 Feb 2009 13:09:54 +0100
Subject: [ARM] 5384/1: unwind: Add stack unwinding support for loadable
 modules

This patch adds ELF section parsing for the unwinding tables in loadable
modules together with the PREL31 relocation symbol resolving.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/elf.h    |  1 +
 arch/arm/include/asm/module.h | 22 +++++++++++----
 arch/arm/kernel/module.c      | 64 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a58378c343b..def8eac6e89 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_ABS32	2
 #define R_ARM_CALL	28
 #define R_ARM_JUMP24	29
+#define R_ARM_PREL31	42
 
 /*
  * These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 24b168dc31a..e4dfa69abb6 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -1,15 +1,27 @@
 #ifndef _ASM_ARM_MODULE_H
 #define _ASM_ARM_MODULE_H
 
-struct mod_arch_specific
-{
-	int foo;
-};
-
 #define Elf_Shdr	Elf32_Shdr
 #define Elf_Sym		Elf32_Sym
 #define Elf_Ehdr	Elf32_Ehdr
 
+struct unwind_table;
+
+struct mod_arch_specific
+{
+#ifdef CONFIG_ARM_UNWIND
+	Elf_Shdr *unw_sec_init;
+	Elf_Shdr *unw_sec_devinit;
+	Elf_Shdr *unw_sec_core;
+	Elf_Shdr *sec_init_text;
+	Elf_Shdr *sec_devinit_text;
+	Elf_Shdr *sec_core_text;
+	struct unwind_table *unwind_init;
+	struct unwind_table *unwind_devinit;
+	struct unwind_table *unwind_core;
+#endif
+};
+
 /*
  * Include the ARM architecture version.
  */
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index dab48f27263..13dbd5bf5cc 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>
+#include <asm/unwind.h>
 
 #ifdef CONFIG_XIP_KERNEL
 /*
@@ -66,6 +67,24 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 			      char *secstrings,
 			      struct module *mod)
 {
+#ifdef CONFIG_ARM_UNWIND
+	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+
+	for (s = sechdrs; s < sechdrs_end; s++) {
+		if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
+			mod->arch.unw_sec_init = s;
+		else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
+			mod->arch.unw_sec_devinit = s;
+		else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
+			mod->arch.unw_sec_core = s;
+		else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
+			mod->arch.sec_init_text = s;
+		else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
+			mod->arch.sec_devinit_text = s;
+		else if (strcmp(".text", secstrings + s->sh_name) == 0)
+			mod->arch.sec_core_text = s;
+	}
+#endif
 	return 0;
 }
 
@@ -104,6 +123,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		loc = dstsec->sh_addr + rel->r_offset;
 
 		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_ARM_NONE:
+			/* ignore */
+			break;
+
 		case R_ARM_ABS32:
 			*(u32 *)loc += sym->st_value;
 			break;
@@ -132,6 +155,11 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc |= offset & 0x00ffffff;
 			break;
 
+		case R_ARM_PREL31:
+			offset = *(u32 *)loc + sym->st_value - loc;
+			*(u32 *)loc = offset & 0x7fffffff;
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
@@ -150,14 +178,50 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	return -ENOEXEC;
 }
 
+#ifdef CONFIG_ARM_UNWIND
+static void register_unwind_tables(struct module *mod)
+{
+	if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
+		mod->arch.unwind_init =
+			unwind_table_add(mod->arch.unw_sec_init->sh_addr,
+					 mod->arch.unw_sec_init->sh_size,
+					 mod->arch.sec_init_text->sh_addr,
+					 mod->arch.sec_init_text->sh_size);
+	if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
+		mod->arch.unwind_devinit =
+			unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
+					 mod->arch.unw_sec_devinit->sh_size,
+					 mod->arch.sec_devinit_text->sh_addr,
+					 mod->arch.sec_devinit_text->sh_size);
+	if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
+		mod->arch.unwind_core =
+			unwind_table_add(mod->arch.unw_sec_core->sh_addr,
+					 mod->arch.unw_sec_core->sh_size,
+					 mod->arch.sec_core_text->sh_addr,
+					 mod->arch.sec_core_text->sh_size);
+}
+
+static void unregister_unwind_tables(struct module *mod)
+{
+	unwind_table_del(mod->arch.unwind_init);
+	unwind_table_del(mod->arch.unwind_devinit);
+	unwind_table_del(mod->arch.unwind_core);
+}
+#else
+static inline void register_unwind_tables(struct module *mod) { }
+static inline void unregister_unwind_tables(struct module *mod) { }
+#endif
+
 int
 module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		struct module *module)
 {
+	register_unwind_tables(module);
 	return 0;
 }
 
 void
 module_arch_cleanup(struct module *mod)
 {
+	unregister_unwind_tables(mod);
 }
-- 
cgit v1.2.3


From c4c5716e16c4ee971dec446a7e4801fbb8a1066b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 16 Feb 2009 11:42:09 +0100
Subject: [ARM] 5385/2: unwind: Add unwinding information to exception entry
 points

This is needed to allow or stop the unwinding at certain points in the
kernel like exception entries.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/entry-armv.S   | 19 +++++++++++++++++++
 arch/arm/kernel/entry-common.S |  4 ++++
 2 files changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 85040cfeb5e..d662a2f1fd8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -20,6 +20,7 @@
 #include <asm/vfpmacros.h>
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
+#include <asm/unwind.h>
 
 #include "entry-header.S"
 
@@ -123,6 +124,8 @@ ENDPROC(__und_invalid)
 #endif
 
 	.macro	svc_entry, stack_hole=0
+ UNWIND(.fnstart		)
+ UNWIND(.save {r0 - pc}		)
 	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
  SPFIX(	tst	sp, #4		)
  SPFIX(	bicne	sp, sp, #4	)
@@ -196,6 +199,7 @@ __dabt_svc:
 	ldr	r0, [sp, #S_PSR]
 	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
 	.align	5
@@ -228,6 +232,7 @@ __irq_svc:
 	bleq	trace_hardirqs_on
 #endif
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
 	.ltorg
@@ -278,6 +283,7 @@ __und_svc:
 	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
 	msr	spsr_cxsf, lr
 	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+ UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
 	.align	5
@@ -320,6 +326,7 @@ __pabt_svc:
 	ldr	r0, [sp, #S_PSR]
 	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+ UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
 	.align	5
@@ -343,6 +350,8 @@ ENDPROC(__pabt_svc)
 #endif
 
 	.macro	usr_entry
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
 	stmib	sp, {r1 - r12}
 
@@ -420,6 +429,7 @@ __dabt_usr:
 	mov	r2, sp
 	adr	lr, ret_from_exception
 	b	do_DataAbort
+ UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
 
 	.align	5
@@ -450,6 +460,7 @@ __irq_usr:
 
 	mov	why, #0
 	b	ret_to_user
+ UNWIND(.fnend		)
 ENDPROC(__irq_usr)
 
 	.ltorg
@@ -484,6 +495,7 @@ __und_usr:
 #else
 	b	__und_usr_unknown
 #endif
+ UNWIND(.fnend		)
 ENDPROC(__und_usr)
 
 	@
@@ -671,14 +683,18 @@ __pabt_usr:
 	enable_irq				@ Enable interrupts
 	mov	r1, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
+ UNWIND(.fnend		)
 	/* fall through */
 /*
  * This is the return code to user mode for abort handlers
  */
 ENTRY(ret_from_exception)
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
 	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user
+ UNWIND(.fnend		)
 ENDPROC(__pabt_usr)
 ENDPROC(ret_from_exception)
 
@@ -688,6 +704,8 @@ ENDPROC(ret_from_exception)
  * previous and next are guaranteed not to be the same.
  */
 ENTRY(__switch_to)
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
 	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
@@ -717,6 +735,7 @@ ENTRY(__switch_to)
 	bl	atomic_notifier_call_chain
 	mov	r0, r5
 	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
 	__INIT
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 49a6ba926c2..b8c1f141144 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -11,6 +11,7 @@
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
 #include <mach/entry-macro.S>
+#include <asm/unwind.h>
 
 #include "entry-header.S"
 
@@ -22,6 +23,8 @@
  * stack.
  */
 ret_fast_syscall:
+ UNWIND(.fnstart	)
+ UNWIND(.cantunwind	)
 	disable_irq				@ disable interrupts
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
@@ -38,6 +41,7 @@ ret_fast_syscall:
 	mov	r0, r0
 	add	sp, sp, #S_FRAME_SIZE - S_PC
 	movs	pc, lr				@ return & move spsr_svc into cpsr
+ UNWIND(.fnend		)
 
 /*
  * Ok, we need to do extra processing, enter the slow path.
-- 
cgit v1.2.3


From adf8b37bafc1495393201a2ae4235846371870d0 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 12 Feb 2009 13:56:34 +0100
Subject: [ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack
 unwinding

This patch also makes the frame pointer default to y only if
!ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is
enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig.debug   | 21 ++++++++++++++++-----
 arch/arm/Makefile        |  4 ++++
 arch/arm/kernel/Makefile |  1 +
 3 files changed, 21 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 192ee01a9ba..35f8db35f44 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,18 +2,29 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
-	default y
+	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, when a problem occurs with the kernel, the
-	  information that is reported is severely limited. Most people
-	  should say Y here.
+	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
+	  when a problem occurs with the kernel, the information that is
+	  reported is severely limited.
+
+config ARM_UNWIND
+	bool "Enable stack unwinding support"
+	depends on AEABI && EXPERIMENTAL
+	default y
+	help
+	  This option enables stack unwinding support in the kernel
+	  using the information automatically generated by the
+	  compiler. The resulting kernel image is slightly bigger but
+	  the performance is not affected. Currently, this feature
+	  only works with EABI compilers. If unsure say Y.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 24e0f018769..e7ef876e574 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -85,6 +85,10 @@ else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
 
+ifeq ($(CONFIG_ARM_UNWIND),y)
+CFLAGS_ABI	+=-funwind-tables
+endif
+
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
 KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 4305345987d..ca60d335e8f 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
-- 
cgit v1.2.3


From 1144d6535fdea5133875dab4a0be5515ae5cb681 Mon Sep 17 00:00:00 2001
From: Daniel Silverstone <dsilvers@simtec.co.uk>
Date: Tue, 10 Feb 2009 13:39:52 +0100
Subject: [ARM] 5376/1: S3C24XX: Fix sparse errors in platform uncompress.h

Ensure __iomem attribute is __force 'd off in the minimal
__raw_writel() implementation.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c/include/plat/uncompress.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 6061de87f22..dc66a477f62 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -90,7 +90,10 @@ static inline void flush(void)
 {
 }
 
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
 
 /* CONFIG_S3C_BOOT_WATCHDOG
  *
-- 
cgit v1.2.3


From eab184c2362567f2b2e951b7bd0e0d353a7e5091 Mon Sep 17 00:00:00 2001
From: Alexander Schulz <alex@shark-linux.de>
Date: Thu, 8 Jan 2009 18:05:58 +0100
Subject: [ARM] 5363/1: Shark cleanup and new defconfig

This includes a new defconfig for the Shark and some changes to
the mach-shark directory to avoid namespace pollution and to
switch the rtc to the newer driver.

Signed-off-by: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/shark_defconfig               | 928 ++++++++++++++++---------
 arch/arm/mach-shark/core.c                     |  48 +-
 arch/arm/mach-shark/include/mach/debug-macro.S |   2 -
 arch/arm/mach-shark/include/mach/framebuffer.h |  16 +
 arch/arm/mach-shark/include/mach/hardware.h    |  27 -
 arch/arm/mach-shark/include/mach/io.h          |   8 +-
 arch/arm/mach-shark/include/mach/irqs.h        |   2 +-
 arch/arm/mach-shark/include/mach/isa-dma.h     |   4 -
 arch/arm/mach-shark/include/mach/memory.h      |   1 +
 arch/arm/mach-shark/include/mach/system.h      |  16 +-
 arch/arm/mach-shark/include/mach/uncompress.h  |   2 +-
 arch/arm/mach-shark/leds.c                     |   6 +-
 12 files changed, 667 insertions(+), 393 deletions(-)
 create mode 100644 arch/arm/mach-shark/include/mach/framebuffer.h

(limited to 'arch')

diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 9b6561d119a..90235bf7a1d 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,88 +1,174 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git3
-# Sat Jul 16 15:21:47 2005
+# Linux kernel version: 2.6.28-git6
+# Thu Jan  8 17:14:47 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_SHARK=y
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Processor Type
@@ -91,14 +177,20 @@ CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
@@ -107,22 +199,40 @@ CONFIG_ISA=y
 CONFIG_ISA_DMA=y
 CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_HOST_VIA82C505=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -135,6 +245,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -143,13 +259,16 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FPE_FASTFPE=y
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -158,44 +277,104 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
 
 #
-# Device Drivers
+# Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
-# Generic Driver Options
+# Network testing
 #
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Memory Technology Devices (MTD)
+# Device Drivers
 #
-# CONFIG_MTD is not set
 
 #
-# Parallel port support
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
@@ -210,52 +389,78 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_IDE_ARM=y
-# CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -275,17 +480,20 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_7000FASST is not set
@@ -296,12 +504,18 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA is not set
@@ -314,20 +528,15 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
@@ -336,123 +545,57 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -462,56 +605,69 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
+CONFIG_CS89x0_NOEEPROM=y
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2 is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -519,18 +675,17 @@ CONFIG_CS89x0=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -540,7 +695,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -553,14 +707,25 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -580,16 +745,22 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -599,90 +770,122 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# TPM devices
+# Sonics Silicon Backplane
 #
-# CONFIG_TCG_TPM is not set
+# CONFIG_SSB is not set
 
 #
-# I2C support
+# Multifunction device drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -691,126 +894,132 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 CONFIG_SOUND_OSS=m
 # CONFIG_SOUND_TRACEINIT is not set
 # CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-CONFIG_SOUND_ADLIB=m
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
 # CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
 # CONFIG_SOUND_VMIDI is not set
 # CONFIG_SOUND_TRIX is not set
 # CONFIG_SOUND_MSS is not set
 # CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
 # CONFIG_SOUND_PAS is not set
 # CONFIG_SOUND_PSS is not set
 CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
 # CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
 # CONFIG_SOUND_UART6850 is not set
 # CONFIG_SOUND_AEDSP16 is not set
 # CONFIG_SOUND_KAHLUA is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# USB Gadget Support
+# Enable Host or Gadget support to see Inventra options
 #
-# CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
+# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -834,14 +1043,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -855,22 +1062,27 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -897,11 +1109,9 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -942,30 +1152,74 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
 
 #
@@ -973,19 +1227,23 @@ CONFIG_DEBUG_USER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a23fd3d0163..4f3a2651259 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -16,12 +16,28 @@
 #include <asm/leds.h>
 #include <asm/param.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#define IO_BASE                 0xe0000000
+#define IO_SIZE                 0x08000000
+#define IO_START                0x40000000
+#define ROMCARD_SIZE            0x08000000
+#define ROMCARD_START           0x10000000
+
+void arch_reset(char mode)
+{
+        short temp;
+        local_irq_disable();
+        /* Reset the Machine via pc[3] of the sequoia chipset */
+        outw(0x09,0x24);
+        temp=inw(0x26);
+        temp = temp | (1<<3) | (1<<10);
+        outw(0x09,0x24);
+        outw(temp,0x26);
+}
+
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.iobase		= 0x3f8,
@@ -50,14 +66,38 @@ static struct platform_device serial_device = {
 	},
 };
 
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0x70,
+		.end	= 0x73,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= IRQ_ISA_RTC_ALARM,
+		.end	= IRQ_ISA_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= rtc_resources,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+};
+
 static int __init shark_init(void)
 {
 	int ret;
 
 	if (machine_is_shark())
+	{
+	        ret = platform_device_register(&rtc_device);
+		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
 		ret = platform_device_register(&serial_device);
-
-	return ret;
+		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
+	}
+	return 0;
 }
 
 arch_initcall(shark_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 0836cb78b29..f97a7626bd5 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -27,5 +27,3 @@
 		bne	1001b
 		.endm
 
-		.macro	waituart,rd,rx
-		.endm
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
new file mode 100644
index 00000000000..84a5bf6e5ba
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/framebuffer.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-shark/include/mach/framebuffer.h
+ *
+ * by Alexander Schulz
+ *
+ */
+
+#ifndef __ASM_ARCH_FRAMEBUFFER_H
+#define __ASM_ARCH_FRAMEBUFFER_H
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index 01bf76099ce..94d84b27a0c 100644
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -10,35 +10,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE			0xe0000000
-
-#else
-
-#define IO_BASE			0
-
-#endif
-
-#define IO_SIZE			0x08000000
-#define IO_START		0x40000000
-#define ROMCARD_SIZE		0x08000000
-#define ROMCARD_START		0x10000000
-
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
 #define UNCACHEABLE_ADDR        0xdf010000
 
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
-
 #define pcibios_assign_all_busses()     1
 
 #define PCIBIOS_MIN_IO          0x6000
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index c5cee829fc8..9ccbcecc430 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -11,10 +11,10 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#define PCIO_BASE	0xe0000000
-#define IO_SPACE_LIMIT	0xffffffff
+#define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)		((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(addr)	(addr)
+#define __io(a)                 ((void __iomem *)(0xe0000000 + (a)))
+
+#define __mem_pci(addr) (addr)
 
 #endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
index 0586acd7cdd..c8e8a4e1f61 100644
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -7,7 +7,7 @@
 #define NR_IRQS			16
 
 #define IRQ_ISA_KEYBOARD	 1
-#define RTC_IRQ			 8
+#define IRQ_ISA_RTC_ALARM	 8
 #define I8042_KBD_IRQ		 1
 #define I8042_AUX_IRQ		12
 #define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
index 864298ff392..96c43b8f8dd 100644
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ b/arch/arm/mach-shark/include/mach/isa-dma.h
@@ -6,10 +6,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev /  .properties
- * in OpenFirmware.
- */
 #define MAX_DMA_CHANNELS	8
 #define DMA_ISA_CASCADE         4
 
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index c5ab038925d..3053e5b7f16 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -23,6 +23,7 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig
 {
   if (node != 0) return;
   /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  /* See dev / -> .properties in OpenFirmware. */
   zone_size[1] = zone_size[0] - 1024;
   zone_size[0] = 1024;
   zhole_size[1] = zhole_size[0];
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index e45bd734a03..0752ca29971 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,20 +6,8 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-
-static void arch_reset(char mode)
-{
-	short temp;
-	local_irq_disable();
-	/* Reset the Machine via pc[3] of the sequoia chipset */
-	outw(0x09,0x24);
-	temp=inw(0x26);
-	temp = temp | (1<<3) | (1<<10);
-	outw(0x09,0x24);
-	outw(temp,0x26);
-
-}
+/* Found in arch/mach-shark/core.c */
+extern void arch_reset(char mode);
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 3725e163341..22ccab4c3c5 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -11,7 +11,7 @@
 
 static inline void putc(int c)
 {
-	int t;
+	volatile int t;
 
 	SERIAL_BASE[0] = c;
 	t=0x10000;
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 8bd8d6bb4d9..c9e32de4adf 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -22,12 +22,16 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
 #define LED_STATE_ENABLED	1
 #define LED_STATE_CLAIMED	2
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
 static char led_state;
 static short hw_led_state;
 static short saved_state;
-- 
cgit v1.2.3


From 533ad5e60c0a5ff3cef7583b5b1b0eee84c2bda6 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 12 Feb 2009 15:58:20 +0100
Subject: [ARM] 5395/1: RealView: Add support for the DS1338 RTC chip

This chip is on the I2C bus on the RealView and Versatile boards. The
patch adds the i2c_board_info definition for this device and registers
it with the I2C subsystem.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c            | 16 +++++++++++++++-
 arch/arm/mach-realview/realview_pb1176.c |  1 +
 arch/arm/mach-versatile/core.c           | 16 +++++++++++++++-
 3 files changed, 31 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index bd2aa4f1614..27b48be7367 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -158,11 +158,25 @@ static struct resource realview_i2c_resource = {
 
 struct platform_device realview_i2c_device = {
 	.name		= "versatile-i2c",
-	.id		= -1,
+	.id		= 0,
 	.num_resources	= 1,
 	.resource	= &realview_i2c_resource,
 };
 
+static struct i2c_board_info realview_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+		.type = "ds1338",
+	},
+};
+
+static int __init realview_i2c_init(void)
+{
+	return i2c_register_board_info(0, realview_i2c_board_info,
+				       ARRAY_SIZE(realview_i2c_board_info));
+}
+arch_initcall(realview_i2c_init);
+
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
 static unsigned int realview_mmc_status(struct device *dev)
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 8f0683c2214..d9d684d29e9 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -260,6 +260,7 @@ static void __init realview_pb1176_init(void)
 
 	realview_flash_register(&realview_pb1176_flash_resource, 1);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1c43494f5c4..565776680d8 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -335,11 +335,25 @@ static struct resource versatile_i2c_resource = {
 
 static struct platform_device versatile_i2c_device = {
 	.name			= "versatile-i2c",
-	.id			= -1,
+	.id			= 0,
 	.num_resources		= 1,
 	.resource		= &versatile_i2c_resource,
 };
 
+static struct i2c_board_info versatile_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+		.type = "ds1338",
+	},
+};
+
+static int __init versatile_i2c_init(void)
+{
+	return i2c_register_board_info(0, versatile_i2c_board_info,
+				       ARRAY_SIZE(versatile_i2c_board_info));
+}
+arch_initcall(versatile_i2c_init);
+
 #define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 
 unsigned int mmc_status(struct device *dev)
-- 
cgit v1.2.3


From 6be62ba215059258b68072d4553f765f9b34f3d1 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 12 Feb 2009 15:59:21 +0100
Subject: [ARM] 5396/1: RealView: Use PATA_PLATFORM to access the CompactFlash

This driver adds the platform_device definitions to allow the use of
CompactFlash on the RealView PB11MPCore and PB-A8 platforms. Note that
the CompactFlash controller is expected to be initialised by the Boot
Monitor and support the True IDE mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/Kconfig                   |  2 ++
 arch/arm/mach-realview/core.c                    | 28 ++++++++++++++++++++++++
 arch/arm/mach-realview/core.h                    |  1 +
 arch/arm/mach-realview/include/mach/board-pba8.h |  2 --
 arch/arm/mach-realview/include/mach/platform.h   |  6 +++++
 arch/arm/mach-realview/realview_pb11mp.c         | 27 +----------------------
 arch/arm/mach-realview/realview_pba8.c           | 27 +----------------------
 7 files changed, 39 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ad911854eb4..b6ec1062777 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -35,6 +35,7 @@ config MACH_REALVIEW_PB11MP
 	bool "Support RealView/PB11MPCore platform"
 	select CPU_V6
 	select ARM_GIC
+	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has
@@ -51,6 +52,7 @@ config MACH_REALVIEW_PBA8
 	bool "Support RealView/PB-A8 platform"
 	select CPU_V7
 	select ARM_GIC
+	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
 	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 27b48be7367..51972ecfc50 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,6 +29,7 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/smc911x.h>
+#include <linux/ata_platform.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -150,6 +151,33 @@ int realview_eth_register(const char *name, struct resource *res)
 	return platform_device_register(&realview_eth_device);
 }
 
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift		= 1,
+};
+
+static struct resource pata_resources[] = {
+	[0] = {
+		.start		= REALVIEW_CF_BASE,
+		.end		= REALVIEW_CF_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_CF_BASE + 0x100,
+		.end		= REALVIEW_CF_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device realview_cf_device = {
+	.name			= "pata_platform",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(pata_resources),
+	.resource		= pata_resources,
+	.dev			= {
+		.platform_data	= &pata_platform_data,
+	},
+};
+
 static struct resource realview_i2c_resource = {
 	.start		= REALVIEW_I2C_BASE,
 	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 44269b162d4..0ba1bfb1fe6 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -45,6 +45,7 @@ static struct amba_device name##_device = {			\
 }
 
 extern struct platform_device realview_flash_device;
+extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
 extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index c8bed8f58ba..307f97b16e5 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -45,8 +45,6 @@
 #define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
 #define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
 #define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PBA8_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
 #define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_PBA8_FLASH0_BASE		0x40000000
 #define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 793a3a33271..c8f50835fed 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -203,6 +203,12 @@
 #define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
 #define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
 
+/*
+ * CompactFlash
+ */
+#define REALVIEW_CF_BASE		0x18000000	/* CompactFlash */
+#define REALVIEW_CF_MEM_BASE		0x18003000	/* SMC for CompactFlash */
+
 /*
  * Disk on Chip
  */
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3ebdb2dadd6..ff50ec2e432 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -230,31 +230,6 @@ static struct resource realview_pb11mp_smsc911x_resources[] = {
 	},
 };
 
-struct resource realview_pb11mp_cf_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_CF_BASE,
-		.end		= REALVIEW_PB11MP_CF_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PB11MP_CF_MEM_BASE,
-		.end		= REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start		= -1,		/* FIXME: Find correct irq */
-		.end		= -1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device realview_pb11mp_cf_device = {
-	.name		= "compactflash",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_pb11mp_cf_resources),
-	.resource	= realview_pb11mp_cf_resources,
-};
-
 static void __init gic_init_irq(void)
 {
 	unsigned int pldctrl;
@@ -308,7 +283,7 @@ static void __init realview_pb11mp_init(void)
 				ARRAY_SIZE(realview_pb11mp_flash_resource));
 	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_pb11mp_cf_device);
+	platform_device_register(&realview_cf_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 34c94435d2d..c6147cba257 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -221,31 +221,6 @@ static struct resource realview_pba8_smsc911x_resources[] = {
 	},
 };
 
-struct resource realview_pba8_cf_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_CF_BASE,
-		.end		= REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PBA8_CF_MEM_BASE,
-		.end		= REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start		= -1,		/* FIXME: Find correct irq */
-		.end		= -1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device realview_pba8_cf_device = {
-	.name		= "compactflash",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_pba8_cf_resources),
-	.resource	= realview_pba8_cf_resources,
-};
-
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
@@ -276,7 +251,7 @@ static void __init realview_pba8_init(void)
 				ARRAY_SIZE(realview_pba8_flash_resource));
 	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_pba8_cf_device);
+	platform_device_register(&realview_cf_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
-- 
cgit v1.2.3


From 7db21712aeb7c9693f7bc554923b35c35303a067 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 12 Feb 2009 16:00:21 +0100
Subject: [ARM] 5397/1: RealView: Add support for the ISP1761 USB chip

This patch adds the platform_device and resource structures for the USB
ISP1761 chip, usable with the in-kernel isp1760 driver.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c            | 11 +++++++++++
 arch/arm/mach-realview/core.h            |  1 +
 arch/arm/mach-realview/realview_eb.c     | 16 ++++++++++++++++
 arch/arm/mach-realview/realview_pb1176.c | 14 ++++++++++++++
 arch/arm/mach-realview/realview_pb11mp.c | 14 ++++++++++++++
 arch/arm/mach-realview/realview_pba8.c   | 14 ++++++++++++++
 6 files changed, 70 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 51972ecfc50..d6766685cfc 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -151,6 +151,17 @@ int realview_eth_register(const char *name, struct resource *res)
 	return platform_device_register(&realview_eth_device);
 }
 
+struct platform_device realview_usb_device = {
+	.name			= "isp1760",
+	.num_resources		= 2,
+};
+
+int realview_usb_register(struct resource *res)
+{
+	realview_usb_device.resource = res;
+	return platform_device_register(&realview_usb_device);
+}
+
 static struct pata_platform_info pata_platform_data = {
 	.ioport_shift		= 1,
 };
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 0ba1bfb1fe6..21c08637683 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -63,5 +63,6 @@ extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
+extern int realview_usb_register(struct resource *res);
 
 #endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index bed39ed9761..c20fbef122b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -264,6 +264,19 @@ static int eth_device_register(void)
 	return realview_eth_register(name, realview_eb_eth_resources);
 }
 
+static struct resource realview_eb_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_EB_USB_BASE,
+		.end		= REALVIEW_EB_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_EB_USB,
+		.end		= IRQ_EB_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -323,6 +336,8 @@ static void realview_eb11mp_fixup(void)
 	/* platform devices */
 	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
 	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
+	realview_eb_isp1761_resources[1].start	= IRQ_EB11MP_USB;
+	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
 }
 
 static void __init realview_eb_timer_init(void)
@@ -366,6 +381,7 @@ static void __init realview_eb_init(void)
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
 	eth_device_register();
+	realview_usb_register(realview_eb_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index d9d684d29e9..a64b84a7a3d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -222,6 +222,19 @@ static struct resource realview_pb1176_smsc911x_resources[] = {
 	},
 };
 
+static struct resource realview_pb1176_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_USB_BASE,
+		.end		= REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PB1176_USB,
+		.end		= IRQ_PB1176_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -261,6 +274,7 @@ static void __init realview_pb1176_init(void)
 	realview_flash_register(&realview_pb1176_flash_resource, 1);
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
+	realview_usb_register(realview_pb1176_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ff50ec2e432..ea1e60eca35 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -230,6 +230,19 @@ static struct resource realview_pb11mp_smsc911x_resources[] = {
 	},
 };
 
+static struct resource realview_pb11mp_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB11MP_USB_BASE,
+		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_TC11MP_USB,
+		.end		= IRQ_TC11MP_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	unsigned int pldctrl;
@@ -284,6 +297,7 @@ static void __init realview_pb11mp_init(void)
 	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pb11mp_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index c6147cba257..d6ac1eb8657 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -221,6 +221,19 @@ static struct resource realview_pba8_smsc911x_resources[] = {
 	},
 };
 
+static struct resource realview_pba8_isp1761_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBA8_USB_BASE,
+		.end		= REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBA8_USB,
+		.end		= IRQ_PBA8_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
@@ -252,6 +265,7 @@ static void __init realview_pba8_init(void)
 	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
+	realview_usb_register(realview_pba8_isp1761_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
-- 
cgit v1.2.3


From 95695547a7db44b88a7ee36cf5df188de267e99e Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 14 Feb 2009 00:50:18 +0300
Subject: x86: asm linkage - introduce GLOBAL macro

If the code is time critical and this entry is called
from other places we use ENTRY to have it globally defined
and especially aligned.

Contrary we have some snippets which are size
critical. So we use plane ".globl name; name:"
directive. Introduce GLOBAL macro for this.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/linkage.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index 5d98d0b68ff..2ecf0f6fc9e 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -52,6 +52,10 @@
 
 #endif
 
+#define GLOBAL(name)	\
+	.globl name;	\
+	name:
+
 #ifdef CONFIG_X86_ALIGNMENT_16
 #define __ALIGN .align 16,0x90
 #define __ALIGN_STR ".align 16,0x90"
-- 
cgit v1.2.3


From 1b25f3b4e18d1acffeb41258a18f13db71da9a7a Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 14 Feb 2009 00:50:19 +0300
Subject: x86: linkage - get rid of _X86 macros

Impact: cleanup

There was an attempt to bring build-time checking for
missed ENTRY_X86/END_X86 and KPROBE... pairs. Using
them will add messy in code. Get just rid of them.
This commit could be easily restored if the need appear
in future.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/linkage.h | 60 ------------------------------------------
 1 file changed, 60 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index 2ecf0f6fc9e..9320e2a8a26 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -61,65 +61,5 @@
 #define __ALIGN_STR ".align 16,0x90"
 #endif
 
-/*
- * to check ENTRY_X86/END_X86 and
- * KPROBE_ENTRY_X86/KPROBE_END_X86
- * unbalanced-missed-mixed appearance
- */
-#define __set_entry_x86		.set ENTRY_X86_IN, 0
-#define __unset_entry_x86	.set ENTRY_X86_IN, 1
-#define __set_kprobe_x86	.set KPROBE_X86_IN, 0
-#define __unset_kprobe_x86	.set KPROBE_X86_IN, 1
-
-#define __macro_err_x86 .error "ENTRY_X86/KPROBE_X86 unbalanced,missed,mixed"
-
-#define __check_entry_x86	\
-	.ifdef ENTRY_X86_IN;	\
-	.ifeq ENTRY_X86_IN;	\
-	__macro_err_x86;	\
-	.abort;			\
-	.endif;			\
-	.endif
-
-#define __check_kprobe_x86	\
-	.ifdef KPROBE_X86_IN;	\
-	.ifeq KPROBE_X86_IN;	\
-	__macro_err_x86;	\
-	.abort;			\
-	.endif;			\
-	.endif
-
-#define __check_entry_kprobe_x86	\
-	__check_entry_x86;		\
-	__check_kprobe_x86
-
-#define ENTRY_KPROBE_FINAL_X86 __check_entry_kprobe_x86
-
-#define ENTRY_X86(name)			\
-	__check_entry_kprobe_x86;	\
-	__set_entry_x86;		\
-	.globl name;			\
-	__ALIGN;			\
-	name:
-
-#define END_X86(name)			\
-	__unset_entry_x86;		\
-	__check_entry_kprobe_x86;	\
-	.size name, .-name
-
-#define KPROBE_ENTRY_X86(name)		\
-	__check_entry_kprobe_x86;	\
-	__set_kprobe_x86;		\
-	.pushsection .kprobes.text, "ax"; \
-	.globl name;			\
-	__ALIGN;			\
-	name:
-
-#define KPROBE_END_X86(name)		\
-	__unset_kprobe_x86;		\
-	__check_entry_kprobe_x86;	\
-	.size name, .-name;		\
-	.popsection
-
 #endif /* _ASM_X86_LINKAGE_H */
 
-- 
cgit v1.2.3


From 2f7955509710fd378a1ac96e19d29d5a0e3301fd Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 14 Feb 2009 00:50:20 +0300
Subject: x86: copy.S - use GLOBAL,ENDPROC macros

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/boot/copy.S | 40 ++++++++++++++--------------------------
 1 file changed, 14 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/copy.S b/arch/x86/boot/copy.S
index ef50c84e8b4..11f272c6f5e 100644
--- a/arch/x86/boot/copy.S
+++ b/arch/x86/boot/copy.S
@@ -8,6 +8,8 @@
  *
  * ----------------------------------------------------------------------- */
 
+#include <linux/linkage.h>
+
 /*
  * Memory copy routines
  */
@@ -15,9 +17,7 @@
 	.code16gcc
 	.text
 
-	.globl	memcpy
-	.type	memcpy, @function
-memcpy:
+GLOBAL(memcpy)
 	pushw	%si
 	pushw	%di
 	movw	%ax, %di
@@ -31,11 +31,9 @@ memcpy:
 	popw	%di
 	popw	%si
 	ret
-	.size	memcpy, .-memcpy
+ENDPROC(memcpy)
 
-	.globl	memset
-	.type	memset, @function
-memset:
+GLOBAL(memset)
 	pushw	%di
 	movw	%ax, %di
 	movzbl	%dl, %eax
@@ -48,52 +46,42 @@ memset:
 	rep; stosb
 	popw	%di
 	ret
-	.size	memset, .-memset
+ENDPROC(memset)
 
-	.globl	copy_from_fs
-	.type	copy_from_fs, @function
-copy_from_fs:
+GLOBAL(copy_from_fs)
 	pushw	%ds
 	pushw	%fs
 	popw	%ds
 	call	memcpy
 	popw	%ds
 	ret
-	.size	copy_from_fs, .-copy_from_fs
+ENDPROC(copy_from_fs)
 
-	.globl	copy_to_fs
-	.type	copy_to_fs, @function
-copy_to_fs:
+GLOBAL(copy_to_fs)
 	pushw	%es
 	pushw	%fs
 	popw	%es
 	call	memcpy
 	popw	%es
 	ret
-	.size	copy_to_fs, .-copy_to_fs
+ENDPROC(copy_to_fs)
 
 #if 0 /* Not currently used, but can be enabled as needed */
-
-	.globl	copy_from_gs
-	.type	copy_from_gs, @function
-copy_from_gs:
+GLOBAL(copy_from_gs)
 	pushw	%ds
 	pushw	%gs
 	popw	%ds
 	call	memcpy
 	popw	%ds
 	ret
-	.size	copy_from_gs, .-copy_from_gs
-	.globl	copy_to_gs
+ENDPROC(copy_from_gs)
 
-	.type	copy_to_gs, @function
-copy_to_gs:
+GLOBAL(copy_to_gs)
 	pushw	%es
 	pushw	%gs
 	popw	%es
 	call	memcpy
 	popw	%es
 	ret
-	.size	copy_to_gs, .-copy_to_gs
-
+ENDPROC(copy_to_gs)
 #endif
-- 
cgit v1.2.3


From 324bda9e47f53aebec1376ee89bba8128c8455e2 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 14 Feb 2009 00:50:21 +0300
Subject: x86: pmjump - use GLOBAL,ENDPROC macros

Impact: cleanup

We are in setup stage so we use GLOBAL
instead of ENTRY and do not increase code
size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/boot/pmjump.S | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S
index 141b6e20ed3..019c17a7585 100644
--- a/arch/x86/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
@@ -15,18 +15,15 @@
 #include <asm/boot.h>
 #include <asm/processor-flags.h>
 #include <asm/segment.h>
+#include <linux/linkage.h>
 
 	.text
-
-	.globl	protected_mode_jump
-	.type	protected_mode_jump, @function
-
 	.code16
 
 /*
  * void protected_mode_jump(u32 entrypoint, u32 bootparams);
  */
-protected_mode_jump:
+GLOBAL(protected_mode_jump)
 	movl	%edx, %esi		# Pointer to boot_params table
 
 	xorl	%ebx, %ebx
@@ -47,12 +44,10 @@ protected_mode_jump:
 	.byte	0x66, 0xea		# ljmpl opcode
 2:	.long	in_pm32			# offset
 	.word	__BOOT_CS		# segment
-
-	.size	protected_mode_jump, .-protected_mode_jump
+ENDPROC(protected_mode_jump)
 
 	.code32
-	.type	in_pm32, @function
-in_pm32:
+GLOBAL(in_pm32)
 	# Set up data segments for flat 32-bit mode
 	movl	%ecx, %ds
 	movl	%ecx, %es
@@ -78,5 +73,4 @@ in_pm32:
 	lldt	%cx
 
 	jmpl	*%eax			# Jump to the 32-bit entrypoint
-
-	.size	in_pm32, .-in_pm32
+ENDPROC(in_pm32)
-- 
cgit v1.2.3


From 2d4eeecb98ade6a736940d43311275b7d32dab21 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 14 Feb 2009 00:50:22 +0300
Subject: x86: compressed head_64 - use ENTRY,ENDPROC macros

Impact: clenaup

Linker script will put startup_32 at predefined
address so using ENTRY will not bloat the code
size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/boot/compressed/head_64.S | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1d5dff4123e..ba9229ba7f0 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -35,9 +35,7 @@
 
 .section ".text.head"
 	.code32
-	.globl startup_32
-
-startup_32:
+ENTRY(startup_32)
 	cld
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 	 * us to not reload segments */
@@ -176,6 +174,7 @@ startup_32:
 
 	/* Jump from 32bit compatibility mode into 64bit mode. */
 	lret
+ENDPROC(startup_32)
 
 no_longmode:
 	/* This isn't an x86-64 CPU so hang */
@@ -295,7 +294,6 @@ relocated:
 	call	decompress_kernel
 	popq	%rsi
 
-
 /*
  * Jump to the decompressed kernel.
  */
-- 
cgit v1.2.3


From cb425afd2183e90a481bb211ff49361a117a3ecc Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sat, 14 Feb 2009 00:50:23 +0300
Subject: x86: compressed head_32 - use ENTRY,ENDPROC macros

Impact: clenaup

Linker script will put startup_32 at predefined
address so using startup_32 will not bloat the
code size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/boot/compressed/head_32.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 29c5fbf0839..9f20d379406 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -30,9 +30,7 @@
 #include <asm/asm-offsets.h>
 
 .section ".text.head","ax",@progbits
-	.globl startup_32
-
-startup_32:
+ENTRY(startup_32)
 	cld
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 	 * us to not reload segments */
@@ -113,6 +111,8 @@ startup_32:
  */
 	leal relocated(%ebx), %eax
 	jmp *%eax
+ENDPROC(startup_32)
+
 .section ".text"
 relocated:
 
-- 
cgit v1.2.3


From c0bf31320dea2cbcbab1f53ee15a8520f762409b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 19 Feb 2009 13:29:22 +0000
Subject: [ARM] omap: add support for bypassing DPLLs

This roughly corresponds with OMAP commits: 7d06c48, 3241b19,
88b5d9b, 18a5500, 9c909ac, 5c6497b, 8b1f0bd, 2ac1da8.

For both OMAP2 and OMAP3, we note the reference and bypass clocks in
the DPLL data structure.  Whenever we modify the DPLL rate, we first
ensure that both the reference and bypass clocks are enabled.  Then,
we decide whether to use the reference and DPLL, or the bypass clock
if the desired rate is identical to the bypass rate, and program the
DPLL appropriately.  Finally, we update the clock's parent, and then
disable the unused clocks.

This keeps the parents correctly balanced, and more importantly ensures
that the bypass clock is running whenever we reprogram the DPLL.  This
is especially important because the procedure for reprogramming the DPLL
involves switching to the bypass clock.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c             |  47 +++++++--
 arch/arm/mach-omap2/clock.h             |  15 +++
 arch/arm/mach-omap2/clock24xx.c         |  39 ++++---
 arch/arm/mach-omap2/clock24xx.h         |   4 +
 arch/arm/mach-omap2/clock34xx.c         |  90 ++++++++++++----
 arch/arm/mach-omap2/clock34xx.h         | 177 +++++---------------------------
 arch/arm/mach-omap2/sdrc2xxx.c          |   2 +-
 arch/arm/plat-omap/include/mach/clock.h |  11 +-
 8 files changed, 186 insertions(+), 199 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 5020cb1f2e7..40cb65ba1fa 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -211,25 +211,52 @@ void omap2_init_clksel_parent(struct clk *clk)
 	return;
 }
 
-/* Returns the DPLL rate */
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
 u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
-	u32 dpll_mult, dpll_div, dpll;
+	u32 dpll_mult, dpll_div, v;
 	struct dpll_data *dd;
 
 	dd = clk->dpll_data;
-	/* REVISIT: What do we return on error? */
 	if (!dd)
 		return 0;
 
-	dpll = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = dpll & dd->mult_mask;
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	}
+
+	v = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = dpll & dd->div1_mask;
+	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)clk->parent->rate * dpll_mult;
+	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -930,7 +957,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
 		 "%ld\n", clk->name, target_rate);
 
-	scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
+	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
 	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
 	dd->last_rounded_rate = 0;
@@ -957,7 +984,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    clk->parent->rate);
+				    dd->clk_ref->rate);
 
 		/* m can't be set low enough for this n - try with a larger n */
 		if (r == DPLL_MULT_UNDERFLOW)
@@ -988,7 +1015,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 
 	dd->last_rounded_m = min_e_m;
 	dd->last_rounded_n = min_e_n;
-	dd->last_rounded_rate = _dpll_compute_new_rate(clk->parent->rate,
+	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
 						       min_e_m,  min_e_n);
 
 	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ca6bf226859..2679ddfa642 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,21 @@
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
+#define CORE_CLK_SRC_32K		0x0
+#define CORE_CLK_SRC_DPLL		0x1
+#define CORE_CLK_SRC_DPLL_X2		0x2
+
+/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP2XXX_EN_DPLL_LPBYPASS		0x1
+#define OMAP2XXX_EN_DPLL_FRBYPASS		0x2
+#define OMAP2XXX_EN_DPLL_LOCKED			0x3
+
+/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP3XXX_EN_DPLL_LPBYPASS		0x5
+#define OMAP3XXX_EN_DPLL_FRBYPASS		0x6
+#define OMAP3XXX_EN_DPLL_LOCKED			0x7
+
 int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index f2b74e9b7d8..1e839c5a28c 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -236,19 +236,32 @@ static struct clk *sclk;
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
 
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
 {
-	long long dpll_clk;
-	u8 amult;
+	long long core_clk;
+	u32 v;
 
-	dpll_clk = omap2_get_dpll_rate(tclk);
+	core_clk = omap2_get_dpll_rate(clk);
 
-	amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	amult &= OMAP24XX_CORE_CLK_SRC_MASK;
-	dpll_clk *= amult;
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
 
-	return dpll_clk;
+	return core_clk;
 }
 
 static int omap2_enable_osc_ck(struct clk *clk)
@@ -371,7 +384,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 
 static unsigned long omap2_dpllcore_recalc(struct clk *clk)
 {
-	return omap2_get_dpll_rate_24xx(clk);
+	return omap2xxx_clk_get_core_rate(clk);
 }
 
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -381,7 +394,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	struct prcm_config tmpset;
 	const struct dpll_data *dd;
 
-	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
 	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
 
@@ -516,7 +529,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	}
 
 	curr_prcm_set = prcm;
-	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
 
 	if (prcm->dpll_speed == cur_rate / 2) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -728,7 +741,7 @@ int __init omap2_clk_init(void)
 		}
 
 	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 11da6215392..33c3e5b1432 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -663,6 +663,10 @@ static struct dpll_data dpll_dd = {
 	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
 	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.clk_bypass		= &sys_ck,
+	.clk_ref		= &sys_ck,
+	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
 	.max_multiplier		= 1024,
 	.min_divider		= 1,
 	.max_divider		= 16,
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fb0f53b9681..0a14dca31e3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -93,7 +93,6 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
 	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
 	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
-	CLK(NULL,	"virt_omap_54m_fck", &virt_omap_54m_fck, CK_343X),
 	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
 	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
 	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
@@ -110,7 +109,6 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
 	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
 	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
-	CLK(NULL,	"omap_120m_fck", &omap_120m_fck, CK_3430ES2),
 	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
 	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
 	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
@@ -344,7 +342,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->parent->rate / (n + 1);
+	fint = clk->dpll_data->clk_ref->rate / (n + 1);
 
 	pr_debug("clock: fint is %lu\n", fint);
 
@@ -411,7 +409,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 }
 
 /*
- * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
  * @clk: pointer to a DPLL struct clk
  *
  * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
@@ -501,14 +499,25 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 static int omap3_noncore_dpll_enable(struct clk *clk)
 {
 	int r;
+	struct dpll_data *dd;
 
 	if (clk == &dpll3_ck)
 		return -EINVAL;
 
-	if (clk->parent->rate == omap2_get_dpll_rate(clk))
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
-	else
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -583,13 +592,18 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
  * @clk: struct clk * of DPLL to set
  * @rate: rounded target rate
  *
- * Program the DPLL with the rounded target rate.  Returns -EINVAL upon
- * error, or 0 upon success.
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
  */
 static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
+	struct clk *new_parent = NULL;
 	u16 freqsel;
 	struct dpll_data *dd;
+	int ret;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -601,18 +615,56 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	if (rate == omap2_get_dpll_rate(clk))
 		return 0;
 
-	if (dd->last_rounded_rate != rate)
-		omap2_dpll_round_rate(clk, rate);
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
 
-	if (dd->last_rounded_rate == 0)
-		return -EINVAL;
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		if (!freqsel)
+			WARN_ON(1);
 
-	freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
-	if (!freqsel)
-		WARN_ON(1);
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
 
-	omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
-				   freqsel);
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
 
 	return 0;
 }
@@ -804,11 +856,11 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 
 	dd = pclk->dpll_data;
 
-	WARN_ON(!dd->control_reg || !dd->enable_mask);
+	WARN_ON(!dd->enable_mask);
 
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
-	if (v != DPLL_LOCKED)
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
 		rate = clk->parent->rate;
 	else
 		rate = clk->parent->rate * 2;
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 764c7cd9fd8..70ec10deb65 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -48,6 +48,10 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
 /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
 #define DPLL_LOW_POWER_STOP		0x1
 #define DPLL_LOW_POWER_BYPASS		0x5
@@ -217,16 +221,6 @@ static struct clk sys_clkout1 = {
 
 /* CM CLOCKS */
 
-static const struct clksel_rate dpll_bypass_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dpll_locked_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
 static const struct clksel_rate div16_dpll_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
@@ -254,6 +248,8 @@ static struct dpll_data dpll1_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll1_fck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
@@ -324,6 +320,8 @@ static struct dpll_data dpll2_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll2_fck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
@@ -384,6 +382,8 @@ static struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
@@ -477,37 +477,19 @@ static struct clk dpll3_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel core_ck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk core_ck = {
 	.name		= "core_ck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= core_ck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel dpll3_m2x2_ck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
+	.parent		= &dpll3_m2_ck,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= dpll3_m2x2_ck_clksel,
+	.parent		= &dpll3_x2_ck,
 	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
@@ -541,22 +523,12 @@ static struct clk dpll3_m3x2_ck = {
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel emu_core_alwon_ck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk emu_core_alwon_ck = {
 	.name		= "emu_core_alwon_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll3_m3x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= emu_core_alwon_ck_clksel,
 	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* DPLL4 */
@@ -566,6 +538,8 @@ static struct dpll_data dpll4_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
@@ -637,12 +611,6 @@ static struct clk dpll4_m2x2_ck = {
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 /*
  * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
  * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
@@ -653,11 +621,7 @@ static struct clk omap_96m_alwon_fck = {
 	.name		= "omap_96m_alwon_fck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_m2x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= omap_96m_alwon_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk cm_96m_fck = {
@@ -720,23 +684,6 @@ static struct clk dpll4_m3x2_ck = {
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel virt_omap_54m_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
-static struct clk virt_omap_54m_fck = {
-	.name		= "virt_omap_54m_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m3x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= virt_omap_54m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
 static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
 	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 0 }
@@ -748,7 +695,7 @@ static const struct clksel_rate omap_54m_alt_rates[] = {
 };
 
 static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
 	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
 	{ .parent = NULL }
 };
@@ -891,6 +838,8 @@ static struct dpll_data dpll5_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
 	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
@@ -936,23 +885,6 @@ static struct clk dpll5_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel omap_120m_fck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_120m_fck = {
-	.name		= "omap_120m_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.clksel		= omap_120m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
 /* CM EXTERNAL CLOCK OUTPUTS */
 
 static const struct clksel_rate clkout2_src_core_rates[] = {
@@ -1058,28 +990,12 @@ static struct clk dpll1_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/*
- * MPU clksel:
- * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll1_fck'
- */
-static const struct clksel mpu_clksel[] = {
-	{ .parent = &dpll1_fck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk mpu_ck = {
 	.name		= "mpu_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll1_x2m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= mpu_clksel,
 	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
@@ -1129,19 +1045,6 @@ static struct clk dpll2_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/*
- * IVA2 clksel:
- * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll2_fck'
- */
-
-static const struct clksel iva2_clksel[] = {
-	{ .parent = &dpll2_fck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk iva2_ck = {
 	.name		= "iva2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -1149,12 +1052,8 @@ static struct clk iva2_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.clksel		= iva2_clksel,
 	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* Common interface clocks */
@@ -1384,7 +1283,7 @@ static struct clk ts_fck = {
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
 	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_120m_fck,
+	.parent		= &dpll5_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2094,24 +1993,14 @@ static struct clk des1_ick = {
 };
 
 /* DSS */
-static const struct clksel dss1_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk dss1_alwon_fck = {
 	.name		= "dss1_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= dss1_alwon_fck_clksel,
 	.clkdm_name	= "dss_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss_tv_fck = {
@@ -2161,24 +2050,14 @@ static struct clk dss_ick = {
 
 /* CAM */
 
-static const struct clksel cam_mclk_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk cam_mclk = {
 	.name		= "cam_mclk",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m5x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.clkdm_name	= "cam_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk cam_ick = {
@@ -2209,7 +2088,7 @@ static struct clk csi2_96m_fck = {
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &omap_120m_fck,
+	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
@@ -2260,7 +2139,7 @@ static const struct clksel_rate usim_120m_rates[] = {
 
 static const struct clksel usim_clksel[] = {
 	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &omap_120m_fck,	.rates = usim_120m_rates },
+	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
 	{ .parent = &sys_ck,		.rates = div2_rates },
 	{ .parent = NULL },
 };
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 3a47aba2903..0afdad5ae9f 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -29,7 +29,7 @@
 #include <mach/sram.h>
 
 #include "prm.h"
-
+#include "clock.h"
 #include <mach/sdrc.h>
 #include "sdrc.h"
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 7b6f6bcbff9..073a2c5569f 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -39,6 +39,10 @@ struct dpll_data {
 	void __iomem		*mult_div1_reg;
 	u32			mult_mask;
 	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
 	unsigned int		rate_tolerance;
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
@@ -49,10 +53,8 @@ struct dpll_data {
 	u16			max_multiplier;
 #  if defined(CONFIG_ARCH_OMAP3)
 	u8			modes;
-	void __iomem		*control_reg;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
-	u32			enable_mask;
 	u32			autoidle_mask;
 	u32			freqsel_mask;
 	u32			idlest_mask;
@@ -154,9 +156,4 @@ extern const struct clkops clkops_null;
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
 
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K		0
-#define CORE_CLK_SRC_DPLL		1
-#define CORE_CLK_SRC_DPLL_X2		2
-
 #endif
-- 
cgit v1.2.3


From 28d27cf4ce8378180eda32aa7d8e778c9e72a54f Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 2 Feb 2009 15:27:55 -0500
Subject: [ARM] Orion: make gpio /input/output validation separate

Especially on Kirkwood, a couple GPIOs are actually only output capable.
Let's separate the ability to configure a GPIO as input or output to
accommodate this restriction.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/plat-orion/gpio.c              | 29 ++++++++++++++++++++---------
 arch/arm/plat-orion/include/plat/gpio.h |  6 +++++-
 2 files changed, 25 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 0d12c216476..32eb9e33beb 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -19,7 +19,8 @@
 
 static DEFINE_SPINLOCK(gpio_lock);
 static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
-static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
 
 static inline void __set_direction(unsigned pin, int input)
 {
@@ -53,7 +54,7 @@ int gpio_direction_input(unsigned pin)
 {
 	unsigned long flags;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
@@ -83,7 +84,7 @@ int gpio_direction_output(unsigned pin, int value)
 	unsigned long flags;
 	u32 u;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
@@ -161,7 +162,9 @@ int gpio_request(unsigned pin, const char *label)
 	unsigned long flags;
 	int ret;
 
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX ||
+	    !(test_bit(pin, gpio_valid_input) ||
+	      test_bit(pin, gpio_valid_output))) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
@@ -183,7 +186,9 @@ EXPORT_SYMBOL(gpio_request);
 
 void gpio_free(unsigned pin)
 {
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+	if (pin >= GPIO_MAX ||
+	    !(test_bit(pin, gpio_valid_input) ||
+	      test_bit(pin, gpio_valid_output))) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return;
 	}
@@ -208,12 +213,18 @@ void __init orion_gpio_set_unused(unsigned pin)
 	__set_direction(pin, 0);
 }
 
-void __init orion_gpio_set_valid(unsigned pin, int valid)
+void __init orion_gpio_set_valid(unsigned pin, int mode)
 {
-	if (valid)
-		__set_bit(pin, gpio_valid);
+	if (mode == 1)
+		mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+	if (mode & GPIO_INPUT_OK)
+		__set_bit(pin, gpio_valid_input);
 	else
-		__clear_bit(pin, gpio_valid);
+		__clear_bit(pin, gpio_valid_input);
+	if (mode & GPIO_OUTPUT_OK)
+		__set_bit(pin, gpio_valid_output);
+	else
+		__clear_bit(pin, gpio_valid_output);
 }
 
 void orion_gpio_set_blink(unsigned pin, int blink)
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index ec743e82c87..33f6c6aec18 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -25,9 +25,13 @@ void gpio_set_value(unsigned pin, int value);
  * Orion-specific GPIO API extensions.
  */
 void orion_gpio_set_unused(unsigned pin);
-void orion_gpio_set_valid(unsigned pin, int valid);
 void orion_gpio_set_blink(unsigned pin, int blink);
 
+#define GPIO_BIDI_OK		(1 << 0)
+#define GPIO_INPUT_OK		(1 << 1)
+#define GPIO_OUTPUT_OK		(1 << 2)
+void orion_gpio_set_valid(unsigned pin, int mode);
+
 /*
  * GPIO interrupt handling.
  */
-- 
cgit v1.2.3


From 0100defd2803f6c3df6bfd400a10af0cf9b8536a Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Fri, 30 Jan 2009 22:44:20 -0500
Subject: [ARM] Kirkwood: MPP initialization code

This allows for board support code to set up their MPP config if the
bootloader didn't do it all or did it wrong.  This also allows to
register usable GPIOs.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/Makefile |   2 +-
 arch/arm/mach-kirkwood/mpp.c    |  97 +++++++++++++
 arch/arm/mach-kirkwood/mpp.h    | 303 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 401 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-kirkwood/mpp.c
 create mode 100644 arch/arm/mach-kirkwood/mpp.h

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index b96c55dad34..fdff35cc8d5 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,4 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
new file mode 100644
index 00000000000..63c44934391
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init kirkwood_variant(void)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+
+	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+		return MPP_F6281_MASK;
+	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
+		return MPP_F6192_MASK;
+	if (dev == MV88F6180_DEV_ID)
+		return MPP_F6180_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown kirkwood variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void __init kirkwood_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = kirkwood_variant();
+	if (!variant_mask)
+		return;
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+			       "kirkwood_mpp_conf: requested MPP%u config "
+			       "unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+
+		mpp_list++;
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
new file mode 100644
index 00000000000..45cccb74310
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -0,0 +1,303 @@
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13) | \
+	/* available on F6180 */	((!!(_F6180)) << 14) | \
+	/* available on F6190 */	((!!(_F6190)) << 15) | \
+	/* available on F6192 */	((!!(_F6192)) << 16) | \
+	/* available on F6281 */	((!!(_F6281)) << 17))
+
+#define MPP_NUM(x)	((x) & 0xff)
+#define MPP_SEL(x)	(((x) >> 8) & 0xf)
+
+				/*   num sel  i  o  6180 6190 6192 6281 */
+
+#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0    )
+#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0    )
+
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0    )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0    )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0    )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1    )
+
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1    )
+
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1    )
+
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1    )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1    )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,    1,  1,   1    )
+#define MPP8_TW_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1    )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP9_TW_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1    )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP10_UArt0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
+
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP11_UArt0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1    )
+
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1    )
+
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1    )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1    )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1    )
+
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1    )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1    )
+
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1    )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1    )
+
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1    )
+
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1    )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1    )
+
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP20_GE1_0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP20_AUDIO_SPDIFI	MPP( 20, 0x4, 1, 0, 0,   0,   1,   1    )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1    )
+
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP21_GE1_1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP21_AUDIO_SPDIFO	MPP( 21, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP22_GE1_2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP22_AUDIO_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1    )
+
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP23_GE1_3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP23_AUDIO_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1    )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1    )
+
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP24_TDM_SPI_CS0	DEV( 24, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP24_GE1_4		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP24_AUDIO_I2SDO	MPP( 24, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP25_GE1_5		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP25_AUDIO_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP26_GE1_6		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP26_AUDIO_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1    )
+
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP27_GE1_7		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP27_AUDIO_I2SDI	MPP( 27, 0x4, 1, 0, 0,   0,   1,   1    )
+
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1    )
+#define MPP28_GE1_8		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP28_AUDIO_EXTCLK	MPP( 28, 0x4, 1, 0, 0,   0,   1,   1    )
+
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1    )
+#define MPP29_GE1_9		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1    )
+#define MPP30_GE1_10		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1    )
+#define MPP31_GE1_11		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1    )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1    )
+#define MPP32_GE1_12		MPP( 32, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP33_GPIO		MPP( 33, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
+
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
+#define MPP35_GE1_15		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1    )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1    )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1    )
+
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP36_AUDIO_SPDIFI	MPP( 36, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP37_AUDIO_SPDIFO	MPP( 37, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP38_AUDIO_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP39_AUDIO_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP40_AUDIO_I2SDO	MPP( 40, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1    )
+#define MPP41_AUDIO_I2SLRC	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP42_AUDIO_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1    )
+
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1    )
+#define MPP43_AUDIO_I2SDI	MPP( 43, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1    )
+#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1    )
+#define MPP44_AUDIO_EXTCLK	MPP( 44, 0x4, 1, 0, 1,   0,   0,   1    )
+
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1    )
+
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1    )
+
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1    )
+
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
+#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1    )
+
+#define MPP_MAX			49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
-- 
cgit v1.2.3


From 12f4815b425b26a610e5dd9a5a5e02872f0f52c5 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Tue, 10 Feb 2009 02:11:43 +0100
Subject: [ARM] Kirkwood: enable both XOR engines on the 6281 RD board

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9a0e905d10c..a1ef8a91848 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,6 +115,8 @@ static void __init rd88f6281_init(void)
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
 
 	platform_device_register(&rd88f6281_nand_flash);
 }
-- 
cgit v1.2.3


From cfdeb6376e439c58c2d37de492d2a8c763621022 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 20 Feb 2009 02:31:35 +0100
Subject: [ARM] mv78xx0: distinguish between different chip steppings

During boot, identify which chip stepping we're running on (determined
by looking at the first PCIe unit's device ID and revision registers),
and print a message with the details about what we found.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-mv78xx0/common.c               | 29 +++++++++++++++++++++++++++-
 arch/arm/mach-mv78xx0/common.h               |  2 ++
 arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 12 ++++++++++++
 arch/arm/mach-mv78xx0/pcie.c                 |  6 ++++++
 4 files changed, 48 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b0e4e0d8f50..538f8f4d4f2 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -719,6 +719,32 @@ struct sys_timer mv78xx0_timer = {
 /*****************************************************************************
  * General
  ****************************************************************************/
+static char * __init mv78xx0_id(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78X00_Z0_DEV_ID) {
+		if (rev == MV78X00_REV_Z0)
+			return "MV78X00-Z0";
+		else
+			return "MV78X00-Rev-Unsupported";
+	} else if (dev == MV78100_DEV_ID) {
+		if (rev == MV78100_REV_A0)
+			return "MV78100-A0";
+		else
+			return "MV78100-Rev-Unsupported";
+	} else if (dev == MV78200_DEV_ID) {
+		if (rev == MV78100_REV_A0)
+			return "MV78200-A0";
+		else
+			return "MV78200-Rev-Unsupported";
+	} else {
+		return "Device-Unknown";
+	}
+}
+
 static int __init is_l2_writethrough(void)
 {
 	return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
@@ -737,7 +763,8 @@ void __init mv78xx0_init(void)
 	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
 	tclk = get_tclk();
 
-	printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+	printk(KERN_INFO "%s ", mv78xx0_id());
+	printk("core #%d, ", core_index);
 	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
 	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 78af5de319d..f6274db6192 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -29,6 +29,8 @@ void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
 void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
 				int maj, int min);
 
+void mv78xx0_pcie_id(u32 *dev, u32 *rev);
+
 void mv78xx0_ehci0_init(void);
 void mv78xx0_ehci1_init(void);
 void mv78xx0_ehci2_init(void);
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index e930ea5330a..328a02e029a 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -79,6 +79,18 @@
 #define   IRQ_MASK_HIGH_OFF	0x0014
 #define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID	0x6381
+#define MV78X00_REV_Z0		1
+
+#define MV78100_DEV_ID		0x7810
+#define MV78100_REV_A0		1
+
+#define MV78200_DEV_ID		0x7820
+#define MV78200_REV_A0		1
+
 /*
  * Register Map
  */
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index aad3a7a2f83..a560439dcc3 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -33,6 +33,12 @@ static struct resource pcie_io_space;
 static struct resource pcie_mem_space;
 
 
+void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+}
+
 static void __init mv78xx0_pcie_preinit(void)
 {
 	int i;
-- 
cgit v1.2.3


From 712424fd95134bf88d27f3885389fe6ab13f34ac Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 20 Feb 2009 02:31:58 +0100
Subject: [ARM] mv78xx0: force eth2/eth3 to PHYless mode on pre-A0 silicon

On pre-A0 revisions of the mv78xx0 SoC, the third and fourth
ethernet interface are not brought out to pins, but are internally
cross-connected, so if we run on pre-A0 silicon, we'll force eth2
and eth3 to PHYless mode.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-mv78xx0/common.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 538f8f4d4f2..15f9913f4a9 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -15,6 +15,7 @@
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/ethtool.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
@@ -430,9 +431,22 @@ static struct platform_device mv78xx0_ge10 = {
 
 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	u32 dev, rev;
+
 	eth_data->shared = &mv78xx0_ge10_shared;
 	mv78xx0_ge10.dev.platform_data = eth_data;
 
+	/*
+	 * On the Z0, ge10 and ge11 are internally connected back
+	 * to back, and not brought out.
+	 */
+	mv78xx0_pcie_id(&dev, &rev);
+	if (dev == MV78X00_Z0_DEV_ID) {
+		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+		eth_data->speed = SPEED_1000;
+		eth_data->duplex = DUPLEX_FULL;
+	}
+
 	platform_device_register(&mv78xx0_ge10_shared);
 	platform_device_register(&mv78xx0_ge10);
 }
@@ -484,9 +498,22 @@ static struct platform_device mv78xx0_ge11 = {
 
 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	u32 dev, rev;
+
 	eth_data->shared = &mv78xx0_ge11_shared;
 	mv78xx0_ge11.dev.platform_data = eth_data;
 
+	/*
+	 * On the Z0, ge10 and ge11 are internally connected back
+	 * to back, and not brought out.
+	 */
+	mv78xx0_pcie_id(&dev, &rev);
+	if (dev == MV78X00_Z0_DEV_ID) {
+		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+		eth_data->speed = SPEED_1000;
+		eth_data->duplex = DUPLEX_FULL;
+	}
+
 	platform_device_register(&mv78xx0_ge11_shared);
 	platform_device_register(&mv78xx0_ge11);
 }
-- 
cgit v1.2.3


From f1f5465782a96201798ef1e8167ed3ffaefdb30d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 20 Feb 2009 02:32:30 +0100
Subject: [ARM] mv78xx0: enable eth2/eth3 on the mv78xx0 A0 development board

The A0 revision of the mv78xx0 development board has four ethernet
ports, with PHY IDs 8-11, whereas the Z0 version has two, with PHY
addresses 8-9.  This patch configures the third and fourth ethernet
port to use the PHY addresses on the A0 board to enable use of those
ports -- if we are running on a Z0 board, the ge10/11 setup code in
common.c will force these back to PHYless mode.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-mv78xx0/db78x00-bp-setup.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 2e285bbb7bb..be0a59a6139 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -28,15 +28,11 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = {
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
 };
 
 static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
 };
 
 static struct mv_sata_platform_data db78x00_sata_data = {
-- 
cgit v1.2.3


From 42f8faecf7a88371de0f30aebb052d1ae51762c0 Mon Sep 17 00:00:00 2001
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue, 17 Feb 2009 11:46:42 +0800
Subject: x86: use percpu data for 4k hardirq and softirq stacks

Impact: economize memory for large NR_CPUS

percpu data is setup earlier than irq, we can use percpu data
to economize memory.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/irq_32.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index e0f29be8ab0..90cd94aba69 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -16,6 +16,7 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
+#include <linux/percpu.h>
 
 #include <asm/apic.h>
 
@@ -55,13 +56,13 @@ static inline void print_stack_overflow(void) { }
 union irq_ctx {
 	struct thread_info      tinfo;
 	u32                     stack[THREAD_SIZE/sizeof(u32)];
-};
+} __attribute__((aligned(PAGE_SIZE)));
 
-static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
-static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
+static DEFINE_PER_CPU(union irq_ctx *, hardirq_ctx);
+static DEFINE_PER_CPU(union irq_ctx *, softirq_ctx);
 
-static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static DEFINE_PER_CPU_PAGE_ALIGNED(union irq_ctx, hardirq_stack);
+static DEFINE_PER_CPU_PAGE_ALIGNED(union irq_ctx, softirq_stack);
 
 static void call_on_stack(void *func, void *stack)
 {
@@ -81,7 +82,7 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
 	u32 *isp, arg1, arg2;
 
 	curctx = (union irq_ctx *) current_thread_info();
-	irqctx = hardirq_ctx[smp_processor_id()];
+	irqctx = __get_cpu_var(hardirq_ctx);
 
 	/*
 	 * this is where we switch to the IRQ stack. However, if we are
@@ -125,34 +126,34 @@ void __cpuinit irq_ctx_init(int cpu)
 {
 	union irq_ctx *irqctx;
 
-	if (hardirq_ctx[cpu])
+	if (per_cpu(hardirq_ctx, cpu))
 		return;
 
-	irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
+	irqctx = &per_cpu(hardirq_stack, cpu);
 	irqctx->tinfo.task		= NULL;
 	irqctx->tinfo.exec_domain	= NULL;
 	irqctx->tinfo.cpu		= cpu;
 	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
 	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
-	hardirq_ctx[cpu] = irqctx;
+	per_cpu(hardirq_ctx, cpu) = irqctx;
 
-	irqctx = (union irq_ctx *) &softirq_stack[cpu*THREAD_SIZE];
+	irqctx = &per_cpu(softirq_stack, cpu);
 	irqctx->tinfo.task		= NULL;
 	irqctx->tinfo.exec_domain	= NULL;
 	irqctx->tinfo.cpu		= cpu;
 	irqctx->tinfo.preempt_count	= 0;
 	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
 
-	softirq_ctx[cpu] = irqctx;
+	per_cpu(softirq_ctx, cpu) = irqctx;
 
 	printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
-	       cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
+	       cpu, per_cpu(hardirq_ctx, cpu),  per_cpu(softirq_ctx, cpu));
 }
 
 void irq_ctx_exit(int cpu)
 {
-	hardirq_ctx[cpu] = NULL;
+	per_cpu(hardirq_ctx, cpu) = NULL;
 }
 
 asmlinkage void do_softirq(void)
@@ -169,7 +170,7 @@ asmlinkage void do_softirq(void)
 
 	if (local_softirq_pending()) {
 		curctx = current_thread_info();
-		irqctx = softirq_ctx[smp_processor_id()];
+		irqctx = __get_cpu_var(softirq_ctx);
 		irqctx->tinfo.task = curctx->task;
 		irqctx->tinfo.previous_esp = current_stack_pointer;
 
-- 
cgit v1.2.3


From b36128c830a8f5bd7d4981f5b0b69950f5928ee6 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 20 Feb 2009 16:29:08 +0900
Subject: alloc_percpu: change percpu_ptr to per_cpu_ptr

Impact: cleanup

There are two allocated per-cpu accessor macros with almost identical
spelling.  The original and far more popular is per_cpu_ptr (44
files), so change over the other 4 files.

tj: kill percpu_ptr() and update UP too

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: mingo@redhat.com
Cc: lenb@kernel.org
Cc: cpufreq@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 4b1c319d30c..22590cf688a 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -601,7 +601,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (!data)
 		return -ENOMEM;
 
-	data->acpi_data = percpu_ptr(acpi_perf_data, cpu);
+	data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu);
 	per_cpu(drv_data, cpu) = data;
 
 	if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
-- 
cgit v1.2.3


From f0aa6617903648077dffe5cfcf7c4458f4610fa7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 20 Feb 2009 16:29:08 +0900
Subject: vmalloc: implement vm_area_register_early()

Impact: allow multiple early vm areas

There are places where kernel VM area needs to be allocated before
vmalloc is initialized.  This is done by allocating static vm_struct,
initializing several fields and linking it to vmlist and later vmalloc
initialization picking up these from vmlist.  This is currently done
manually and if there's more than one such areas, there's no defined
way to arbitrate who gets which address.

This patch implements vm_area_register_early(), which takes vm_area
struct with flags and size initialized, assigns address to it and puts
it on the vmlist.  This way, multiple early vm areas can determine
which addresses they should use.  The only current user - alpha mm
init - is converted to use it.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/alpha/mm/init.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 5d7a16eab31..df6df025ded 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -189,9 +189,21 @@ callback_init(void * kernel_end)
 
 	if (alpha_using_srm) {
 		static struct vm_struct console_remap_vm;
-		unsigned long vaddr = VMALLOC_START;
+		unsigned long nr_pages = 0;
+		unsigned long vaddr;
 		unsigned long i, j;
 
+		/* calculate needed size */
+		for (i = 0; i < crb->map_entries; ++i)
+			nr_pages += crb->map[i].count;
+
+		/* register the vm area */
+		console_remap_vm.flags = VM_ALLOC;
+		console_remap_vm.size = nr_pages << PAGE_SHIFT;
+		vm_area_register_early(&console_remap_vm);
+
+		vaddr = (unsigned long)consle_remap_vm.addr;
+
 		/* Set up the third level PTEs and update the virtual
 		   addresses of the CRB entries.  */
 		for (i = 0; i < crb->map_entries; ++i) {
@@ -213,12 +225,6 @@ callback_init(void * kernel_end)
 				vaddr += PAGE_SIZE;
 			}
 		}
-
-		/* Let vmalloc know that we've allocated some space.  */
-		console_remap_vm.flags = VM_ALLOC;
-		console_remap_vm.addr = (void *) VMALLOC_START;
-		console_remap_vm.size = vaddr - VMALLOC_START;
-		vmlist = &console_remap_vm;
 	}
 
 	callback_init_done = 1;
-- 
cgit v1.2.3


From 11124411aa95827404d6bfdfc14c908e1b54513c Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 20 Feb 2009 16:29:09 +0900
Subject: x86: convert to the new dynamic percpu allocator

Impact: use new dynamic allocator, unified access to static/dynamic
        percpu memory

Convert to the new dynamic percpu allocator.

* implement populate_extra_pte() for both 32 and 64
* update setup_per_cpu_areas() to use pcpu_setup_static()
* define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr()
* define config HAVE_DYNAMIC_PER_CPU_AREA

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/Kconfig               |  3 ++
 arch/x86/include/asm/percpu.h  |  8 ++++++
 arch/x86/include/asm/pgtable.h |  1 +
 arch/x86/kernel/setup_percpu.c | 62 +++++++++++++++++++++++++++---------------
 arch/x86/mm/init_32.c          | 10 +++++++
 arch/x86/mm/init_64.c          | 19 +++++++++++++
 6 files changed, 81 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f760a22f95d..d3f6eadfd4b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -135,6 +135,9 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
+config HAVE_DYNAMIC_PER_CPU_AREA
+	def_bool y
+
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index aee103b26d0..8f1d2fbec1d 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -43,6 +43,14 @@
 #else /* ...!ASSEMBLY */
 
 #include <linux/stringify.h>
+#include <asm/sections.h>
+
+#define __addr_to_pcpu_ptr(addr)					\
+	(void *)((unsigned long)(addr) - (unsigned long)pcpu_base_addr	\
+		 + (unsigned long)__per_cpu_start)
+#define __pcpu_ptr_to_addr(ptr)						\
+	(void *)((unsigned long)(ptr) + (unsigned long)pcpu_base_addr	\
+		 - (unsigned long)__per_cpu_start)
 
 #ifdef CONFIG_SMP
 #define __percpu_arg(x)		"%%"__stringify(__percpu_seg)":%P" #x
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 6f7c102018b..dd91c2515c6 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -402,6 +402,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 
 /* Install a pte for a particular vaddr in kernel space. */
 void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+void populate_extra_pte(unsigned long vaddr);
 
 #ifdef CONFIG_X86_32
 extern void native_pagetable_setup_start(pgd_t *base);
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index d992e6cff73..2dce4355821 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -61,38 +61,56 @@ static inline void setup_percpu_segment(int cpu)
  */
 void __init setup_per_cpu_areas(void)
 {
-	ssize_t size;
-	char *ptr;
-	int cpu;
-
-	/* Copy section for each CPU (we discard the original) */
-	size = roundup(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
+	ssize_t size = __per_cpu_end - __per_cpu_start;
+	unsigned int nr_cpu_pages = DIV_ROUND_UP(size, PAGE_SIZE);
+	static struct page **pages;
+	size_t pages_size;
+	unsigned int cpu, i, j;
+	unsigned long delta;
+	size_t pcpu_unit_size;
 
 	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
+	pr_info("PERCPU: Allocating %zd bytes for static per cpu data\n", size);
 
-	pr_info("PERCPU: Allocating %zd bytes of per cpu data\n", size);
+	pages_size = nr_cpu_pages * num_possible_cpus() * sizeof(pages[0]);
+	pages = alloc_bootmem(pages_size);
 
+	j = 0;
 	for_each_possible_cpu(cpu) {
+		void *ptr;
+
+		for (i = 0; i < nr_cpu_pages; i++) {
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-		ptr = alloc_bootmem_pages(size);
+			ptr = alloc_bootmem_pages(PAGE_SIZE);
 #else
-		int node = early_cpu_to_node(cpu);
-		if (!node_online(node) || !NODE_DATA(node)) {
-			ptr = alloc_bootmem_pages(size);
-			pr_info("cpu %d has no node %d or node-local memory\n",
-				cpu, node);
-			pr_debug("per cpu data for cpu%d at %016lx\n",
-				 cpu, __pa(ptr));
-		} else {
-			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
-			pr_debug("per cpu data for cpu%d on node%d at %016lx\n",
-				cpu, node, __pa(ptr));
-		}
+			int node = early_cpu_to_node(cpu);
+
+			if (!node_online(node) || !NODE_DATA(node)) {
+				ptr = alloc_bootmem_pages(PAGE_SIZE);
+				pr_info("cpu %d has no node %d or node-local "
+					"memory\n", cpu, node);
+				pr_debug("per cpu data for cpu%d at %016lx\n",
+					 cpu, __pa(ptr));
+			} else {
+				ptr = alloc_bootmem_pages_node(NODE_DATA(node),
+							       PAGE_SIZE);
+				pr_debug("per cpu data for cpu%d on node%d "
+					 "at %016lx\n", cpu, node, __pa(ptr));
+			}
 #endif
+			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
+			pages[j++] = virt_to_page(ptr);
+		}
+	}
+
+	pcpu_unit_size = pcpu_setup_static(populate_extra_pte, pages, size);
 
-		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
-		per_cpu_offset(cpu) = ptr - __per_cpu_start;
+	free_bootmem(__pa(pages), pages_size);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu) {
+		per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 00263bf07a8..8b1a0ef7f87 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -137,6 +137,16 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
 	return pte_offset_kernel(pmd, 0);
 }
 
+void __init populate_extra_pte(unsigned long vaddr)
+{
+	int pgd_idx = pgd_index(vaddr);
+	int pmd_idx = pmd_index(vaddr);
+	pmd_t *pmd;
+
+	pmd = one_md_table_init(swapper_pg_dir + pgd_idx);
+	one_page_table_init(pmd + pmd_idx);
+}
+
 static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
 					   unsigned long vaddr, pte_t *lastpte)
 {
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index e6d36b49025..7f91e2cdc4c 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -223,6 +223,25 @@ set_pte_vaddr(unsigned long vaddr, pte_t pteval)
 	set_pte_vaddr_pud(pud_page, vaddr, pteval);
 }
 
+void __init populate_extra_pte(unsigned long vaddr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+
+	pgd = pgd_offset_k(vaddr);
+	if (pgd_none(*pgd)) {
+		pud = (pud_t *)spp_getpage();
+		pgd_populate(&init_mm, pgd, pud);
+		if (pud != pud_offset(pgd, 0)) {
+			printk(KERN_ERR "PAGETABLE BUG #00! %p <-> %p\n",
+			       pud, pud_offset(pgd, 0));
+			return;
+		}
+	}
+
+	set_pte_vaddr_pud((pud_t *)pgd_page_vaddr(*pgd), vaddr, __pte(0));
+}
+
 /*
  * Create large page table mappings for a range of physical addresses.
  */
-- 
cgit v1.2.3


From ecab22aa6dc9d42ca52de2cad0854b4c6bd85ac9 Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Fri, 20 Feb 2009 11:56:38 +0100
Subject: x86: use symbolic constants for MSR_IA32_MISC_ENABLE bits

Impact: Cleanup. No functional changes.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cpufreq/e_powersaver.c       | 6 +++---
 arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 6 +++---
 arch/x86/kernel/cpu/intel.c                      | 4 ++--
 arch/x86/kernel/cpu/mcheck/mce_intel_64.c        | 6 +++---
 arch/x86/kernel/cpu/mcheck/p4.c                  | 4 ++--
 5 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
index c2f930d8664..41ab3f064cb 100644
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
@@ -204,12 +204,12 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	}
 	/* Enable Enhanced PowerSaver */
 	rdmsrl(MSR_IA32_MISC_ENABLE, val);
-	if (!(val & 1 << 16)) {
-		val |= 1 << 16;
+	if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+		val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
 		wrmsrl(MSR_IA32_MISC_ENABLE, val);
 		/* Can be locked at 0 */
 		rdmsrl(MSR_IA32_MISC_ENABLE, val);
-		if (!(val & 1 << 16)) {
+		if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
 			printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
 			return -ENODEV;
 		}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index f08998278a3..c9f1fdc0283 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -390,14 +390,14 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 	   enable it if not. */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 
-	if (!(l & (1<<16))) {
-		l |= (1<<16);
+	if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
+		l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
 		dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
 		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
 
 		/* check to see if it stuck */
 		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-		if (!(l & (1<<16))) {
+		if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
 			printk(KERN_INFO PFX
 				"couldn't enable Enhanced SpeedStep\n");
 			return -ENODEV;
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 1f137a87d4b..c8ff69a4668 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -147,10 +147,10 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 	 */
 	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
 		rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
-		if ((lo & (1<<9)) == 0) {
+		if ((lo & MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE) == 0) {
 			printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
 			printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
-			lo |= (1<<9);	/* Disable hw prefetching */
+			lo |= MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE;
 			wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
 		}
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 5e8c79e748a..ae00938ea50 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -49,13 +49,13 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
 	 */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 	h = apic_read(APIC_LVTTHMR);
-	if ((l & (1 << 3)) && (h & APIC_DM_SMI)) {
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG
 		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
 		return;
 	}
 
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & (1 << 13)))
+	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
 		tm2 = 1;
 
 	if (h & APIC_VECTOR_MASK) {
@@ -73,7 +73,7 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
 	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
 
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
 
 	l = apic_read(APIC_LVTTHMR);
 	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index 9b60fce09f7..f53bdcbaf38 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -85,7 +85,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	 */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 	h = apic_read(APIC_LVTTHMR);
-	if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
+	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
 				cpu);
 		return; /* -EBUSY */
@@ -111,7 +111,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	vendor_thermal_interrupt = intel_thermal_interrupt;
 
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
 
 	l = apic_read(APIC_LVTTHMR);
 	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-- 
cgit v1.2.3


From 3c3e5694add02e665bbbd0fecfbbdcc0b903097a Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Thu, 19 Feb 2009 11:46:36 -0500
Subject: x86: check PMD in spurious_fault handler

Impact: fix to prevent hard lockup on bad PMD permissions

If the PMD does not have the correct permissions for a page access,
but the PTE does, the spurious fault handler will mistake the fault
as a lazy TLB transaction. This will result in an infinite loop of:

 fault -> spurious_fault check (pass) -> return to code -> fault

This patch adds a check and a warn on if the PTE passes the permissions
but the PMD does not.

[ Updated: Ingo Molnar suggested using WARN_ONCE with some text ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
---
 arch/x86/mm/fault.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index c76ef1d701c..278d645d108 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -455,6 +455,7 @@ static int spurious_fault(unsigned long address,
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
+	int ret;
 
 	/* Reserved-bit violation or user access to kernel space? */
 	if (error_code & (PF_USER | PF_RSVD))
@@ -482,7 +483,17 @@ static int spurious_fault(unsigned long address,
 	if (!pte_present(*pte))
 		return 0;
 
-	return spurious_fault_check(error_code, pte);
+	ret = spurious_fault_check(error_code, pte);
+	if (!ret)
+		return 0;
+
+	/*
+	 * Make sure we have permissions in PMD
+	 * If not, then there's a bug in the page tables.
+	 */
+	ret = spurious_fault_check(error_code, (pte_t *) pmd);
+	WARN_ONCE(!ret, "PMD has incorrect permission bits\n");
+	return ret;
 }
 
 /*
-- 
cgit v1.2.3


From 7a5714e0186030676d79a7b4b9830c8e45c3b0a1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 17:44:21 +0100
Subject: x86, pat: add large-PAT check to split_large_page()

Impact: future-proof the split_large_page() function

Linus noticed that split_large_page() is not safe wrt. the
PAT bit: it is bit 12 on the 1GB and 2MB page table level
(_PAGE_BIT_PAT_LARGE), and it is bit 7 on the 4K page
table level (_PAGE_BIT_PAT).

Currently it is not a problem because we never set
_PAGE_BIT_PAT_LARGE on any of the large-page mappings - but
should this happen in the future the split_large_page() would
silently lift bit 12 into the lowlevel 4K pte and would start
corrupting the physical page frame offset. Not fun.

So add a debug warning, to make sure if something ever sets
the PAT bit then this function gets updated too.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7be47d1a97e..8253bc97587 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -482,6 +482,13 @@ static int split_large_page(pte_t *kpte, unsigned long address)
 	pbase = (pte_t *)page_address(base);
 	paravirt_alloc_pte(&init_mm, page_to_pfn(base));
 	ref_prot = pte_pgprot(pte_clrhuge(*kpte));
+	/*
+	 * If we ever want to utilize the PAT bit, we need to
+	 * update this function to make sure it's converted from
+	 * bit 12 to bit 7 when we cross from the 2MB level to
+	 * the 4K level:
+	 */
+	WARN_ON_ONCE(pgprot_val(ref_prot) & _PAGE_PAT_LARGE);
 
 #ifdef CONFIG_X86_64
 	if (level == PG_LEVEL_1G) {
-- 
cgit v1.2.3


From fdb17aeb28aaad3eae5ef57e70cb287d34d1049d Mon Sep 17 00:00:00 2001
From: Alok Kataria <akataria@vmware.com>
Date: Fri, 20 Feb 2009 10:23:18 -0800
Subject: x86, vmi: TSC going backwards check in vmi clocksource, cleanup

clean up vmi_read_cycles to use max()

Reported-b: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Zach Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmiclock_32.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 9cd28c04952..b77ad5789af 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -288,8 +288,7 @@ static struct clocksource clocksource_vmi;
 static cycle_t read_real_cycles(void)
 {
 	cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
-	return ret >= clocksource_vmi.cycle_last ?
-		ret : clocksource_vmi.cycle_last;
+	return max(ret, clocksource_vmi.cycle_last);
 }
 
 static struct clocksource clocksource_vmi = {
-- 
cgit v1.2.3


From 2d4a71676f4d89418a0d53e60b89e8b804b390b2 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 19:56:40 +0100
Subject: x86, mm: fault.c cleanup

Impact: cleanup, no code changed

Clean up various small details, which can be correctness checked
automatically:

 - tidy up the include file section
 - eliminate unnecessary includes
 - introduce show_signal_msg() to clean up code flow
 - standardize the code flow
 - standardize comments and other style details
 - more cleanups, pointed out by checkpatch

No code changed on either 32-bit nor 64-bit:

arch/x86/mm/fault.o:

   text	   data	    bss	    dec	    hex	filename
   4632	     32	     24	   4688	   1250	fault.o.before
   4632	     32	     24	   4688	   1250	fault.o.after

the md5 changed due to a change in a single instruction:

   2e8a8241e7f0d69706776a5a26c90bc0  fault.o.before.asm
   c5c3d36e725586eb74f0e10692f0193e  fault.o.after.asm

Because a __LINE__ reference in a WARN_ONCE() has changed.

On 32-bit a few stack offsets changed - no code size difference
nor any functionality difference.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 546 +++++++++++++++++++++++++++++++---------------------
 1 file changed, 331 insertions(+), 215 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index e4b9fc5001c..351d679bf97 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -1,56 +1,59 @@
 /*
  *  Copyright (C) 1995  Linus Torvalds
- *  Copyright (C) 2001,2002 Andi Kleen, SuSE Labs.
+ *  Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
  */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mmiotrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/vt_kern.h>		/* For unblank_screen() */
+#include <linux/mmiotrace.h>
+#include <linux/bootmem.h>
 #include <linux/compiler.h>
 #include <linux/highmem.h>
-#include <linux/bootmem.h>		/* for max_low_pfn */
-#include <linux/vmalloc.h>
-#include <linux/module.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/vt_kern.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/module.h>
 #include <linux/kdebug.h>
+#include <linux/errno.h>
 #include <linux/magic.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/tty.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+
+#include <asm-generic/sections.h>
 
-#include <asm/system.h>
-#include <asm/desc.h>
-#include <asm/segment.h>
-#include <asm/pgalloc.h>
-#include <asm/smp.h>
 #include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+#include <asm/segment.h>
+#include <asm/system.h>
 #include <asm/proto.h>
-#include <asm-generic/sections.h>
 #include <asm/traps.h>
+#include <asm/desc.h>
 
 /*
- * Page fault error code bits
- *	bit 0 == 0 means no page found, 1 means protection fault
- *	bit 1 == 0 means read, 1 means write
- *	bit 2 == 0 means kernel, 1 means user-mode
- *	bit 3 == 1 means use of reserved bit detected
- *	bit 4 == 1 means fault was an instruction fetch
+ * Page fault error code bits:
+ *
+ *   bit 0 ==	 0: no page found	1: protection fault
+ *   bit 1 ==	 0: read access		1: write access
+ *   bit 2 ==	 0: kernel-mode access	1: user-mode access
+ *   bit 3 ==				1: use of reserved bit detected
+ *   bit 4 ==				1: fault was an instruction fetch
  */
-#define PF_PROT		(1<<0)
-#define PF_WRITE	(1<<1)
-#define PF_USER		(1<<2)
-#define PF_RSVD		(1<<3)
-#define PF_INSTR	(1<<4)
+enum x86_pf_error_code {
+
+	PF_PROT		=		1 << 0,
+	PF_WRITE	=		1 << 1,
+	PF_USER		=		1 << 2,
+	PF_RSVD		=		1 << 3,
+	PF_INSTR	=		1 << 4,
+};
 
 static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
 {
@@ -82,23 +85,27 @@ static inline int notify_page_fault(struct pt_regs *regs)
 }
 
 /*
- * X86_32
- * Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
- * Check that here and ignore it.
+ * Prefetch quirks:
+ *
+ * 32-bit mode:
+ *
+ *   Sometimes AMD Athlon/Opteron CPUs report invalid exceptions on prefetch.
+ *   Check that here and ignore it.
  *
- * X86_64
- * Sometimes the CPU reports invalid exceptions on prefetch.
- * Check that here and ignore it.
+ * 64-bit mode:
  *
- * Opcode checker based on code by Richard Brunner
+ *   Sometimes the CPU reports invalid exceptions on prefetch.
+ *   Check that here and ignore it.
+ *
+ * Opcode checker based on code by Richard Brunner.
  */
-static int is_prefetch(struct pt_regs *regs, unsigned long error_code,
-			unsigned long addr)
+static int
+is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
 {
+	unsigned char *max_instr;
 	unsigned char *instr;
 	int scan_more = 1;
 	int prefetch = 0;
-	unsigned char *max_instr;
 
 	/*
 	 * If it was a exec (instruction fetch) fault on NX page, then
@@ -114,9 +121,9 @@ static int is_prefetch(struct pt_regs *regs, unsigned long error_code,
 		return 0;
 
 	while (scan_more && instr < max_instr) {
-		unsigned char opcode;
 		unsigned char instr_hi;
 		unsigned char instr_lo;
+		unsigned char opcode;
 
 		if (probe_kernel_address(instr, opcode))
 			break;
@@ -173,15 +180,17 @@ static int is_prefetch(struct pt_regs *regs, unsigned long error_code,
 	return prefetch;
 }
 
-static void force_sig_info_fault(int si_signo, int si_code,
-	unsigned long address, struct task_struct *tsk)
+static void
+force_sig_info_fault(int si_signo, int si_code, unsigned long address,
+		     struct task_struct *tsk)
 {
 	siginfo_t info;
 
-	info.si_signo = si_signo;
-	info.si_errno = 0;
-	info.si_code = si_code;
-	info.si_addr = (void __user *)address;
+	info.si_signo	= si_signo;
+	info.si_errno	= 0;
+	info.si_code	= si_code;
+	info.si_addr	= (void __user *)address;
+
 	force_sig_info(si_signo, &info, tsk);
 }
 
@@ -189,6 +198,7 @@ static void force_sig_info_fault(int si_signo, int si_code,
 static int bad_address(void *p)
 {
 	unsigned long dummy;
+
 	return probe_kernel_address((unsigned long *)p, dummy);
 }
 #endif
@@ -200,13 +210,14 @@ static void dump_pagetable(unsigned long address)
 
 	page = read_cr3();
 	page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
+
 #ifdef CONFIG_X86_PAE
 	printk("*pdpt = %016Lx ", page);
 	if ((page >> PAGE_SHIFT) < max_low_pfn
 	    && page & _PAGE_PRESENT) {
 		page &= PAGE_MASK;
 		page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
-		                                         & (PTRS_PER_PMD - 1)];
+							& (PTRS_PER_PMD - 1)];
 		printk(KERN_CONT "*pde = %016Lx ", page);
 		page &= ~_PAGE_NX;
 	}
@@ -218,14 +229,15 @@ static void dump_pagetable(unsigned long address)
 	 * We must not directly access the pte in the highpte
 	 * case if the page table is located in highmem.
 	 * And let's rather not kmap-atomic the pte, just in case
-	 * it's allocated already.
+	 * it's allocated already:
 	 */
 	if ((page >> PAGE_SHIFT) < max_low_pfn
 	    && (page & _PAGE_PRESENT)
 	    && !(page & _PAGE_PSE)) {
+
 		page &= PAGE_MASK;
 		page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
-		                                         & (PTRS_PER_PTE - 1)];
+							& (PTRS_PER_PTE - 1)];
 		printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
 	}
 
@@ -239,26 +251,38 @@ static void dump_pagetable(unsigned long address)
 	pgd = (pgd_t *)read_cr3();
 
 	pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
+
 	pgd += pgd_index(address);
-	if (bad_address(pgd)) goto bad;
+	if (bad_address(pgd))
+		goto bad;
+
 	printk("PGD %lx ", pgd_val(*pgd));
-	if (!pgd_present(*pgd)) goto ret;
+
+	if (!pgd_present(*pgd))
+		goto out;
 
 	pud = pud_offset(pgd, address);
-	if (bad_address(pud)) goto bad;
+	if (bad_address(pud))
+		goto bad;
+
 	printk("PUD %lx ", pud_val(*pud));
 	if (!pud_present(*pud) || pud_large(*pud))
-		goto ret;
+		goto out;
 
 	pmd = pmd_offset(pud, address);
-	if (bad_address(pmd)) goto bad;
+	if (bad_address(pmd))
+		goto bad;
+
 	printk("PMD %lx ", pmd_val(*pmd));
-	if (!pmd_present(*pmd) || pmd_large(*pmd)) goto ret;
+	if (!pmd_present(*pmd) || pmd_large(*pmd))
+		goto out;
 
 	pte = pte_offset_kernel(pmd, address);
-	if (bad_address(pte)) goto bad;
+	if (bad_address(pte))
+		goto bad;
+
 	printk("PTE %lx", pte_val(*pte));
-ret:
+out:
 	printk("\n");
 	return;
 bad:
@@ -285,7 +309,6 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	 * and redundant with the set_pmd() on non-PAE. As would
 	 * set_pud.
 	 */
-
 	pud = pud_offset(pgd, address);
 	pud_k = pud_offset(pgd_k, address);
 	if (!pud_present(*pud_k))
@@ -295,11 +318,14 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	pmd_k = pmd_offset(pud_k, address);
 	if (!pmd_present(*pmd_k))
 		return NULL;
+
 	if (!pmd_present(*pmd)) {
 		set_pmd(pmd, *pmd_k);
 		arch_flush_lazy_mmu_mode();
-	} else
+	} else {
 		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+	}
+
 	return pmd_k;
 }
 #endif
@@ -312,29 +338,37 @@ KERN_ERR "******* Please consider a BIOS update.\n"
 KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
 #endif
 
-/* Workaround for K8 erratum #93 & buggy BIOS.
-   BIOS SMM functions are required to use a specific workaround
-   to avoid corruption of the 64bit RIP register on C stepping K8.
-   A lot of BIOS that didn't get tested properly miss this.
-   The OS sees this as a page fault with the upper 32bits of RIP cleared.
-   Try to work around it here.
-   Note we only handle faults in kernel here.
-   Does nothing for X86_32
+/*
+ * Workaround for K8 erratum #93 & buggy BIOS.
+ *
+ * BIOS SMM functions are required to use a specific workaround
+ * to avoid corruption of the 64bit RIP register on C stepping K8.
+ *
+ * A lot of BIOS that didn't get tested properly miss this.
+ *
+ * The OS sees this as a page fault with the upper 32bits of RIP cleared.
+ * Try to work around it here.
+ *
+ * Note we only handle faults in kernel here.
+ * Does nothing on 32-bit.
  */
 static int is_errata93(struct pt_regs *regs, unsigned long address)
 {
 #ifdef CONFIG_X86_64
-	static int warned;
+	static int once;
+
 	if (address != regs->ip)
 		return 0;
+
 	if ((address >> 32) != 0)
 		return 0;
+
 	address |= 0xffffffffUL << 32;
 	if ((address >= (u64)_stext && address <= (u64)_etext) ||
 	    (address >= MODULES_VADDR && address <= MODULES_END)) {
-		if (!warned) {
+		if (!once) {
 			printk(errata93_warning);
-			warned = 1;
+			once = 1;
 		}
 		regs->ip = address;
 		return 1;
@@ -344,16 +378,17 @@ static int is_errata93(struct pt_regs *regs, unsigned long address)
 }
 
 /*
- * Work around K8 erratum #100 K8 in compat mode occasionally jumps to illegal
- * addresses >4GB.  We catch this in the page fault handler because these
- * addresses are not reachable. Just detect this case and return.  Any code
+ * Work around K8 erratum #100 K8 in compat mode occasionally jumps
+ * to illegal addresses >4GB.
+ *
+ * We catch this in the page fault handler because these addresses
+ * are not reachable. Just detect this case and return.  Any code
  * segment in LDT is compatibility mode.
  */
 static int is_errata100(struct pt_regs *regs, unsigned long address)
 {
 #ifdef CONFIG_X86_64
-	if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) &&
-	    (address >> 32))
+	if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) && (address >> 32))
 		return 1;
 #endif
 	return 0;
@@ -363,8 +398,9 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
 {
 #ifdef CONFIG_X86_F00F_BUG
 	unsigned long nr;
+
 	/*
-	 * Pentium F0 0F C7 C8 bug workaround.
+	 * Pentium F0 0F C7 C8 bug workaround:
 	 */
 	if (boot_cpu_data.f00f_bug) {
 		nr = (address - idt_descr.address) >> 3;
@@ -378,8 +414,9 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
 	return 0;
 }
 
-static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
-			    unsigned long address)
+static void
+show_fault_oops(struct pt_regs *regs, unsigned long error_code,
+		unsigned long address)
 {
 #ifdef CONFIG_X86_32
 	if (!oops_may_print())
@@ -389,12 +426,14 @@ static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 #ifdef CONFIG_X86_PAE
 	if (error_code & PF_INSTR) {
 		unsigned int level;
+
 		pte_t *pte = lookup_address(address, &level);
 
-		if (pte && pte_present(*pte) && !pte_exec(*pte))
+		if (pte && pte_present(*pte) && !pte_exec(*pte)) {
 			printk(KERN_CRIT "kernel tried to execute "
 				"NX-protected page - exploit attempt? "
 				"(uid: %d)\n", current_uid());
+		}
 	}
 #endif
 
@@ -403,34 +442,45 @@ static void show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 		printk(KERN_CONT "NULL pointer dereference");
 	else
 		printk(KERN_CONT "paging request");
+
 	printk(KERN_CONT " at %p\n", (void *) address);
 	printk(KERN_ALERT "IP:");
 	printk_address(regs->ip, 1);
+
 	dump_pagetable(address);
 }
 
 #ifdef CONFIG_X86_64
-static noinline void pgtable_bad(struct pt_regs *regs,
-			 unsigned long error_code, unsigned long address)
+static noinline void
+pgtable_bad(struct pt_regs *regs, unsigned long error_code,
+	    unsigned long address)
 {
-	unsigned long flags = oops_begin();
-	int sig = SIGKILL;
-	struct task_struct *tsk = current;
+	struct task_struct *tsk;
+	unsigned long flags;
+	int sig;
+
+	flags = oops_begin();
+	tsk = current;
+	sig = SIGKILL;
 
 	printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
 	       tsk->comm, address);
 	dump_pagetable(address);
-	tsk->thread.cr2 = address;
-	tsk->thread.trap_no = 14;
-	tsk->thread.error_code = error_code;
+
+	tsk->thread.cr2		= address;
+	tsk->thread.trap_no	= 14;
+	tsk->thread.error_code	= error_code;
+
 	if (__die("Bad pagetable", regs, error_code))
 		sig = 0;
+
 	oops_end(flags, regs, sig);
 }
 #endif
 
-static noinline void no_context(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address)
+static noinline void
+no_context(struct pt_regs *regs, unsigned long error_code,
+	   unsigned long address)
 {
 	struct task_struct *tsk = current;
 	unsigned long *stackend;
@@ -440,18 +490,20 @@ static noinline void no_context(struct pt_regs *regs,
 	int sig;
 #endif
 
-	/* Are we prepared to handle this kernel fault?  */
+	/* Are we prepared to handle this kernel fault? */
 	if (fixup_exception(regs))
 		return;
 
 	/*
-	 * X86_32
-	 * Valid to do another page fault here, because if this fault
-	 * had been triggered by is_prefetch fixup_exception would have
-	 * handled it.
+	 * 32-bit:
+	 *
+	 *   Valid to do another page fault here, because if this fault
+	 *   had been triggered by is_prefetch fixup_exception would have
+	 *   handled it.
+	 *
+	 * 64-bit:
 	 *
-	 * X86_64
-	 * Hall of shame of CPU/BIOS bugs.
+	 *   Hall of shame of CPU/BIOS bugs.
 	 */
 	if (is_prefetch(regs, error_code, address))
 		return;
@@ -461,7 +513,7 @@ static noinline void no_context(struct pt_regs *regs,
 
 	/*
 	 * Oops. The kernel tried to access some bad page. We'll have to
-	 * terminate things with extreme prejudice.
+	 * terminate things with extreme prejudice:
 	 */
 #ifdef CONFIG_X86_32
 	bust_spinlocks(1);
@@ -471,7 +523,7 @@ static noinline void no_context(struct pt_regs *regs,
 
 	show_fault_oops(regs, error_code, address);
 
- 	stackend = end_of_stack(tsk);
+	stackend = end_of_stack(tsk);
 	if (*stackend != STACK_END_MAGIC)
 		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
 
@@ -487,28 +539,54 @@ static noinline void no_context(struct pt_regs *regs,
 	sig = SIGKILL;
 	if (__die("Oops", regs, error_code))
 		sig = 0;
+
 	/* Executive summary in case the body of the oops scrolled away */
 	printk(KERN_EMERG "CR2: %016lx\n", address);
+
 	oops_end(flags, regs, sig);
 #endif
 }
 
-static void __bad_area_nosemaphore(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address,
-			int si_code)
+/*
+ * Print out info about fatal segfaults, if the show_unhandled_signals
+ * sysctl is set:
+ */
+static inline void
+show_signal_msg(struct pt_regs *regs, unsigned long error_code,
+		unsigned long address, struct task_struct *tsk)
+{
+	if (!unhandled_signal(tsk, SIGSEGV))
+		return;
+
+	if (!printk_ratelimit())
+		return;
+
+	printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+		tsk->comm, task_pid_nr(tsk), address,
+		(void *)regs->ip, (void *)regs->sp, error_code);
+
+	print_vma_addr(KERN_CONT " in ", regs->ip);
+
+	printk(KERN_CONT "\n");
+}
+
+static void
+__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
+		       unsigned long address, int si_code)
 {
 	struct task_struct *tsk = current;
 
 	/* User mode accesses just cause a SIGSEGV */
 	if (error_code & PF_USER) {
 		/*
-		 * It's possible to have interrupts off here.
+		 * It's possible to have interrupts off here:
 		 */
 		local_irq_enable();
 
 		/*
 		 * Valid to do another page fault here because this one came
-		 * from user space.
+		 * from user space:
 		 */
 		if (is_prefetch(regs, error_code, address))
 			return;
@@ -516,22 +594,16 @@ static void __bad_area_nosemaphore(struct pt_regs *regs,
 		if (is_errata100(regs, address))
 			return;
 
-		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-		    printk_ratelimit()) {
-			printk(
-			"%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
-			task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
-			tsk->comm, task_pid_nr(tsk), address,
-			(void *) regs->ip, (void *) regs->sp, error_code);
-			print_vma_addr(" in ", regs->ip);
-			printk("\n");
-		}
+		if (unlikely(show_unhandled_signals))
+			show_signal_msg(regs, error_code, address, tsk);
+
+		/* Kernel addresses are always protection faults: */
+		tsk->thread.cr2		= address;
+		tsk->thread.error_code	= error_code | (address >= TASK_SIZE);
+		tsk->thread.trap_no	= 14;
 
-		tsk->thread.cr2 = address;
-		/* Kernel addresses are always protection faults */
-		tsk->thread.error_code = error_code | (address >= TASK_SIZE);
-		tsk->thread.trap_no = 14;
 		force_sig_info_fault(SIGSEGV, si_code, address, tsk);
+
 		return;
 	}
 
@@ -541,15 +613,16 @@ static void __bad_area_nosemaphore(struct pt_regs *regs,
 	no_context(regs, error_code, address);
 }
 
-static noinline void bad_area_nosemaphore(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address)
+static noinline void
+bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
+		     unsigned long address)
 {
 	__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
 }
 
-static void __bad_area(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address,
-			int si_code)
+static void
+__bad_area(struct pt_regs *regs, unsigned long error_code,
+	   unsigned long address, int si_code)
 {
 	struct mm_struct *mm = current->mm;
 
@@ -562,67 +635,77 @@ static void __bad_area(struct pt_regs *regs,
 	__bad_area_nosemaphore(regs, error_code, address, si_code);
 }
 
-static noinline void bad_area(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address)
+static noinline void
+bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
 {
 	__bad_area(regs, error_code, address, SEGV_MAPERR);
 }
 
-static noinline void bad_area_access_error(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address)
+static noinline void
+bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
+		      unsigned long address)
 {
 	__bad_area(regs, error_code, address, SEGV_ACCERR);
 }
 
 /* TODO: fixup for "mm-invoke-oom-killer-from-page-fault.patch" */
-static void out_of_memory(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address)
+static void
+out_of_memory(struct pt_regs *regs, unsigned long error_code,
+	      unsigned long address)
 {
 	/*
 	 * We ran out of memory, call the OOM killer, and return the userspace
-	 * (which will retry the fault, or kill us if we got oom-killed).
+	 * (which will retry the fault, or kill us if we got oom-killed):
 	 */
 	up_read(&current->mm->mmap_sem);
+
 	pagefault_out_of_memory();
 }
 
-static void do_sigbus(struct pt_regs *regs,
-			unsigned long error_code, unsigned long address)
+static void
+do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
 
 	up_read(&mm->mmap_sem);
 
-	/* Kernel mode? Handle exceptions or die */
+	/* Kernel mode? Handle exceptions or die: */
 	if (!(error_code & PF_USER))
 		no_context(regs, error_code, address);
+
 #ifdef CONFIG_X86_32
-	/* User space => ok to do another page fault */
+	/* User space => ok to do another page fault: */
 	if (is_prefetch(regs, error_code, address))
 		return;
 #endif
-	tsk->thread.cr2 = address;
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 14;
+
+	tsk->thread.cr2		= address;
+	tsk->thread.error_code	= error_code;
+	tsk->thread.trap_no	= 14;
+
 	force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
 }
 
-static noinline void mm_fault_error(struct pt_regs *regs,
-		unsigned long error_code, unsigned long address, unsigned int fault)
+static noinline void
+mm_fault_error(struct pt_regs *regs, unsigned long error_code,
+	       unsigned long address, unsigned int fault)
 {
-	if (fault & VM_FAULT_OOM)
+	if (fault & VM_FAULT_OOM) {
 		out_of_memory(regs, error_code, address);
-	else if (fault & VM_FAULT_SIGBUS)
-		do_sigbus(regs, error_code, address);
-	else
-		BUG();
+	} else {
+		if (fault & VM_FAULT_SIGBUS)
+			do_sigbus(regs, error_code, address);
+		else
+			BUG();
+	}
 }
 
 static int spurious_fault_check(unsigned long error_code, pte_t *pte)
 {
 	if ((error_code & PF_WRITE) && !pte_write(*pte))
 		return 0;
+
 	if ((error_code & PF_INSTR) && !pte_exec(*pte))
 		return 0;
 
@@ -630,16 +713,19 @@ static int spurious_fault_check(unsigned long error_code, pte_t *pte)
 }
 
 /*
- * Handle a spurious fault caused by a stale TLB entry.  This allows
- * us to lazily refresh the TLB when increasing the permissions of a
- * kernel page (RO -> RW or NX -> X).  Doing it eagerly is very
- * expensive since that implies doing a full cross-processor TLB
- * flush, even if no stale TLB entries exist on other processors.
+ * Handle a spurious fault caused by a stale TLB entry.
+ *
+ * This allows us to lazily refresh the TLB when increasing the
+ * permissions of a kernel page (RO -> RW or NX -> X).  Doing it
+ * eagerly is very expensive since that implies doing a full
+ * cross-processor TLB flush, even if no stale TLB entries exist
+ * on other processors.
+ *
  * There are no security implications to leaving a stale TLB when
  * increasing the permissions on a page.
  */
-static noinline int spurious_fault(unsigned long error_code,
-				unsigned long address)
+static noinline int
+spurious_fault(unsigned long error_code, unsigned long address)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -678,20 +764,23 @@ static noinline int spurious_fault(unsigned long error_code,
 		return 0;
 
 	/*
-	 * Make sure we have permissions in PMD
-	 * If not, then there's a bug in the page tables.
+	 * Make sure we have permissions in PMD.
+	 * If not, then there's a bug in the page tables:
 	 */
 	ret = spurious_fault_check(error_code, (pte_t *) pmd);
 	WARN_ONCE(!ret, "PMD has incorrect permission bits\n");
+
 	return ret;
 }
 
 /*
- * X86_32
- * Handle a fault on the vmalloc or module mapping area
+ * 32-bit:
+ *
+ *   Handle a fault on the vmalloc or module mapping area
  *
- * X86_64
- * Handle a fault on the vmalloc area
+ * 64-bit:
+ *
+ *   Handle a fault on the vmalloc area
  *
  * This assumes no large pages in there.
  */
@@ -702,7 +791,7 @@ static noinline int vmalloc_fault(unsigned long address)
 	pmd_t *pmd_k;
 	pte_t *pte_k;
 
-	/* Make sure we are in vmalloc area */
+	/* Make sure we are in vmalloc area: */
 	if (!(address >= VMALLOC_START && address < VMALLOC_END))
 		return -1;
 
@@ -717,9 +806,11 @@ static noinline int vmalloc_fault(unsigned long address)
 	pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
 	if (!pmd_k)
 		return -1;
+
 	pte_k = pte_offset_kernel(pmd_k, address);
 	if (!pte_present(*pte_k))
 		return -1;
+
 	return 0;
 #else
 	pgd_t *pgd, *pgd_ref;
@@ -727,69 +818,84 @@ static noinline int vmalloc_fault(unsigned long address)
 	pmd_t *pmd, *pmd_ref;
 	pte_t *pte, *pte_ref;
 
-	/* Make sure we are in vmalloc area */
+	/* Make sure we are in vmalloc area: */
 	if (!(address >= VMALLOC_START && address < VMALLOC_END))
 		return -1;
 
-	/* Copy kernel mappings over when needed. This can also
-	   happen within a race in page table update. In the later
-	   case just flush. */
-
+	/*
+	 * Copy kernel mappings over when needed. This can also
+	 * happen within a race in page table update. In the later
+	 * case just flush:
+	 */
 	pgd = pgd_offset(current->active_mm, address);
 	pgd_ref = pgd_offset_k(address);
 	if (pgd_none(*pgd_ref))
 		return -1;
+
 	if (pgd_none(*pgd))
 		set_pgd(pgd, *pgd_ref);
 	else
 		BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
 
-	/* Below here mismatches are bugs because these lower tables
-	   are shared */
+	/*
+	 * Below here mismatches are bugs because these lower tables
+	 * are shared:
+	 */
 
 	pud = pud_offset(pgd, address);
 	pud_ref = pud_offset(pgd_ref, address);
 	if (pud_none(*pud_ref))
 		return -1;
+
 	if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
 		BUG();
+
 	pmd = pmd_offset(pud, address);
 	pmd_ref = pmd_offset(pud_ref, address);
 	if (pmd_none(*pmd_ref))
 		return -1;
+
 	if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
 		BUG();
+
 	pte_ref = pte_offset_kernel(pmd_ref, address);
 	if (!pte_present(*pte_ref))
 		return -1;
+
 	pte = pte_offset_kernel(pmd, address);
-	/* Don't use pte_page here, because the mappings can point
-	   outside mem_map, and the NUMA hash lookup cannot handle
-	   that. */
+
+	/*
+	 * Don't use pte_page here, because the mappings can point
+	 * outside mem_map, and the NUMA hash lookup cannot handle
+	 * that:
+	 */
 	if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
 		BUG();
+
 	return 0;
 #endif
 }
 
 int show_unhandled_signals = 1;
 
-static inline int access_error(unsigned long error_code, int write,
-				struct vm_area_struct *vma)
+static inline int
+access_error(unsigned long error_code, int write, struct vm_area_struct *vma)
 {
 	if (write) {
-		/* write, present and write, not present */
+		/* write, present and write, not present: */
 		if (unlikely(!(vma->vm_flags & VM_WRITE)))
 			return 1;
-	} else if (unlikely(error_code & PF_PROT)) {
-		/* read, present */
-		return 1;
-	} else {
-		/* read, not present */
-		if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
-			return 1;
+		return 0;
 	}
 
+	/* read, present: */
+	if (unlikely(error_code & PF_PROT))
+		return 1;
+
+	/* read, not present: */
+	if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+		return 1;
+
 	return 0;
 }
 
@@ -797,9 +903,9 @@ static int fault_in_kernel_space(unsigned long address)
 {
 #ifdef CONFIG_X86_32
 	return address >= TASK_SIZE;
-#else /* !CONFIG_X86_32 */
+#else
 	return address >= TASK_SIZE64;
-#endif /* CONFIG_X86_32 */
+#endif
 }
 
 /*
@@ -812,18 +918,19 @@ asmlinkage
 #endif
 void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
-	unsigned long address;
+	struct vm_area_struct *vma;
 	struct task_struct *tsk;
+	unsigned long address;
 	struct mm_struct *mm;
-	struct vm_area_struct *vma;
 	int write;
 	int fault;
 
 	tsk = current;
 	mm = tsk->mm;
+
 	prefetchw(&mm->mmap_sem);
 
-	/* get the address */
+	/* Get the faulting address: */
 	address = read_cr2();
 
 	if (unlikely(kmmio_fault(regs, address)))
@@ -847,22 +954,23 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		    vmalloc_fault(address) >= 0)
 			return;
 
-		/* Can handle a stale RO->RW TLB */
+		/* Can handle a stale RO->RW TLB: */
 		if (spurious_fault(error_code, address))
 			return;
 
-		/* kprobes don't want to hook the spurious faults. */
+		/* kprobes don't want to hook the spurious faults: */
 		if (notify_page_fault(regs))
 			return;
 		/*
 		 * Don't take the mm semaphore here. If we fixup a prefetch
-		 * fault we could otherwise deadlock.
+		 * fault we could otherwise deadlock:
 		 */
 		bad_area_nosemaphore(regs, error_code, address);
+
 		return;
 	}
 
-	/* kprobes don't want to hook the spurious faults. */
+	/* kprobes don't want to hook the spurious faults: */
 	if (unlikely(notify_page_fault(regs)))
 		return;
 	/*
@@ -870,13 +978,15 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 * vmalloc fault has been handled.
 	 *
 	 * User-mode registers count as a user access even for any
-	 * potential system fault or CPU buglet.
+	 * potential system fault or CPU buglet:
 	 */
 	if (user_mode_vm(regs)) {
 		local_irq_enable();
 		error_code |= PF_USER;
-	} else if (regs->flags & X86_EFLAGS_IF)
-		local_irq_enable();
+	} else {
+		if (regs->flags & X86_EFLAGS_IF)
+			local_irq_enable();
+	}
 
 #ifdef CONFIG_X86_64
 	if (unlikely(error_code & PF_RSVD))
@@ -884,8 +994,8 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 #endif
 
 	/*
-	 * If we're in an interrupt, have no user context or are running in an
-	 * atomic region then we must not take the fault.
+	 * If we're in an interrupt, have no user context or are running
+	 * in an atomic region then we must not take the fault:
 	 */
 	if (unlikely(in_atomic() || !mm)) {
 		bad_area_nosemaphore(regs, error_code, address);
@@ -894,19 +1004,19 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
 	/*
 	 * When running in the kernel we expect faults to occur only to
-	 * addresses in user space.  All other faults represent errors in the
-	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
-	 * erroneous fault occurring in a code path which already holds mmap_sem
-	 * we will deadlock attempting to validate the fault against the
-	 * address space.  Luckily the kernel only validly references user
-	 * space from well defined areas of code, which are listed in the
-	 * exceptions table.
+	 * addresses in user space.  All other faults represent errors in
+	 * the kernel and should generate an OOPS.  Unfortunately, in the
+	 * case of an erroneous fault occurring in a code path which already
+	 * holds mmap_sem we will deadlock attempting to validate the fault
+	 * against the address space.  Luckily the kernel only validly
+	 * references user space from well defined areas of code, which are
+	 * listed in the exceptions table.
 	 *
 	 * As the vast majority of faults will be valid we will only perform
-	 * the source reference check when there is a possibility of a deadlock.
-	 * Attempt to lock the address space, if we cannot we then validate the
-	 * source.  If this is invalid we can skip the address space check,
-	 * thus avoiding the deadlock.
+	 * the source reference check when there is a possibility of a
+	 * deadlock. Attempt to lock the address space, if we cannot we then
+	 * validate the source. If this is invalid we can skip the address
+	 * space check, thus avoiding the deadlock:
 	 */
 	if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
 		if ((error_code & PF_USER) == 0 &&
@@ -917,8 +1027,9 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		down_read(&mm->mmap_sem);
 	} else {
 		/*
-		 * The above down_read_trylock() might have succeeded in which
-		 * case we'll have missed the might_sleep() from down_read().
+		 * The above down_read_trylock() might have succeeded in
+		 * which case we'll have missed the might_sleep() from
+		 * down_read():
 		 */
 		might_sleep();
 	}
@@ -938,7 +1049,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		/*
 		 * Accessing the stack below %sp is always a bug.
 		 * The large cushion allows instructions like enter
-		 * and pusha to work.  ("enter $65535,$31" pushes
+		 * and pusha to work. ("enter $65535, $31" pushes
 		 * 32 pointers and then decrements %sp by 65535.)
 		 */
 		if (unlikely(address + 65536 + 32 * sizeof(unsigned long) < regs->sp)) {
@@ -957,6 +1068,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 */
 good_area:
 	write = error_code & PF_WRITE;
+
 	if (unlikely(access_error(error_code, write, vma))) {
 		bad_area_access_error(regs, error_code, address);
 		return;
@@ -965,13 +1077,15 @@ good_area:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
+	 * the fault:
 	 */
 	fault = handle_mm_fault(mm, vma, address, write);
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		mm_fault_error(regs, error_code, address, fault);
 		return;
 	}
+
 	if (fault & VM_FAULT_MAJOR)
 		tsk->maj_flt++;
 	else
@@ -1004,13 +1118,13 @@ void vmalloc_sync_all(void)
 	for (address = VMALLOC_START & PMD_MASK;
 	     address >= TASK_SIZE && address < FIXADDR_TOP;
 	     address += PMD_SIZE) {
+
 		unsigned long flags;
 		struct page *page;
 
 		spin_lock_irqsave(&pgd_lock, flags);
 		list_for_each_entry(page, &pgd_list, lru) {
-			if (!vmalloc_sync_one(page_address(page),
-					      address))
+			if (!vmalloc_sync_one(page_address(page), address))
 				break;
 		}
 		spin_unlock_irqrestore(&pgd_lock, flags);
@@ -1018,12 +1132,14 @@ void vmalloc_sync_all(void)
 #else /* CONFIG_X86_64 */
 	for (address = VMALLOC_START & PGDIR_MASK; address <= VMALLOC_END;
 	     address += PGDIR_SIZE) {
+
 		const pgd_t *pgd_ref = pgd_offset_k(address);
 		unsigned long flags;
 		struct page *page;
 
 		if (pgd_none(*pgd_ref))
 			continue;
+
 		spin_lock_irqsave(&pgd_lock, flags);
 		list_for_each_entry(page, &pgd_list, lru) {
 			pgd_t *pgd;
-- 
cgit v1.2.3


From 107a03678cac0dd6cf7095f81442a4fa477e4700 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 20:37:05 +0100
Subject: x86, mm: fault.c, refactor/simplify the is_prefetch() code

Impact: no functionality changed

Factor out the opcode checker into a helper inline.

The code got a tiny bit smaller:

   text	   data	    bss	    dec	    hex	filename
   4632	     32	     24	   4688	   1250	fault.o.before
   4618	     32	     24	   4674	   1242	fault.o.after

And it got cleaner / easier to review as well.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 100 ++++++++++++++++++++++++++--------------------------
 1 file changed, 50 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 351d679bf97..72973c7682b 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -99,12 +99,58 @@ static inline int notify_page_fault(struct pt_regs *regs)
  *
  * Opcode checker based on code by Richard Brunner.
  */
+static inline int
+check_prefetch_opcode(struct pt_regs *regs, unsigned char *instr,
+		      unsigned char opcode, int *prefetch)
+{
+	unsigned char instr_hi = opcode & 0xf0;
+	unsigned char instr_lo = opcode & 0x0f;
+
+	switch (instr_hi) {
+	case 0x20:
+	case 0x30:
+		/*
+		 * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
+		 * In X86_64 long mode, the CPU will signal invalid
+		 * opcode if some of these prefixes are present so
+		 * X86_64 will never get here anyway
+		 */
+		return ((instr_lo & 7) == 0x6);
+#ifdef CONFIG_X86_64
+	case 0x40:
+		/*
+		 * In AMD64 long mode 0x40..0x4F are valid REX prefixes
+		 * Need to figure out under what instruction mode the
+		 * instruction was issued. Could check the LDT for lm,
+		 * but for now it's good enough to assume that long
+		 * mode only uses well known segments or kernel.
+		 */
+		return (!user_mode(regs)) || (regs->cs == __USER_CS);
+#endif
+	case 0x60:
+		/* 0x64 thru 0x67 are valid prefixes in all modes. */
+		return (instr_lo & 0xC) == 0x4;
+	case 0xF0:
+		/* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
+		return !instr_lo || (instr_lo>>1) == 1;
+	case 0x00:
+		/* Prefetch instruction is 0x0F0D or 0x0F18 */
+		if (probe_kernel_address(instr, opcode))
+			return 0;
+
+		*prefetch = (instr_lo == 0xF) &&
+			(opcode == 0x0D || opcode == 0x18);
+		return 0;
+	default:
+		return 0;
+	}
+}
+
 static int
 is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
 {
 	unsigned char *max_instr;
 	unsigned char *instr;
-	int scan_more = 1;
 	int prefetch = 0;
 
 	/*
@@ -114,68 +160,22 @@ is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
 	if (error_code & PF_INSTR)
 		return 0;
 
-	instr = (unsigned char *)convert_ip_to_linear(current, regs);
+	instr = (void *)convert_ip_to_linear(current, regs);
 	max_instr = instr + 15;
 
 	if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
 		return 0;
 
-	while (scan_more && instr < max_instr) {
-		unsigned char instr_hi;
-		unsigned char instr_lo;
+	while (instr < max_instr) {
 		unsigned char opcode;
 
 		if (probe_kernel_address(instr, opcode))
 			break;
 
-		instr_hi = opcode & 0xf0;
-		instr_lo = opcode & 0x0f;
 		instr++;
 
-		switch (instr_hi) {
-		case 0x20:
-		case 0x30:
-			/*
-			 * Values 0x26,0x2E,0x36,0x3E are valid x86 prefixes.
-			 * In X86_64 long mode, the CPU will signal invalid
-			 * opcode if some of these prefixes are present so
-			 * X86_64 will never get here anyway
-			 */
-			scan_more = ((instr_lo & 7) == 0x6);
-			break;
-#ifdef CONFIG_X86_64
-		case 0x40:
-			/*
-			 * In AMD64 long mode 0x40..0x4F are valid REX prefixes
-			 * Need to figure out under what instruction mode the
-			 * instruction was issued. Could check the LDT for lm,
-			 * but for now it's good enough to assume that long
-			 * mode only uses well known segments or kernel.
-			 */
-			scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS);
-			break;
-#endif
-		case 0x60:
-			/* 0x64 thru 0x67 are valid prefixes in all modes. */
-			scan_more = (instr_lo & 0xC) == 0x4;
+		if (!check_prefetch_opcode(regs, instr, opcode, &prefetch))
 			break;
-		case 0xF0:
-			/* 0xF0, 0xF2, 0xF3 are valid prefixes in all modes. */
-			scan_more = !instr_lo || (instr_lo>>1) == 1;
-			break;
-		case 0x00:
-			/* Prefetch instruction is 0x0F0D or 0x0F18 */
-			scan_more = 0;
-
-			if (probe_kernel_address(instr, opcode))
-				break;
-			prefetch = (instr_lo == 0xF) &&
-				(opcode == 0x0D || opcode == 0x18);
-			break;
-		default:
-			scan_more = 0;
-			break;
-		}
 	}
 	return prefetch;
 }
-- 
cgit v1.2.3


From 8c938f9fae887f6e180bf802aa1c33cf74712aff Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 22:12:18 +0100
Subject: x86, mm: fault.c, factor out the vm86 fault check

Impact: cleanup

Instead of an ugly, open-coded, #ifdef-ed vm86 related legacy check
in do_page_fault(), put it into the check_v8086_mode() helper
function and merge it with an existing #ifdef.

Also, simplify the code flow a tiny bit in the helper.

No code changed:

arch/x86/mm/fault.o:

   text	   data	    bss	    dec	    hex	filename
   2711	     12	     12	   2735	    aaf	fault.o.before
   2711	     12	     12	   2735	    aaf	fault.o.after

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 43 +++++++++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 72973c7682b..7dc0615c3cf 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -328,14 +328,41 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 
 	return pmd_k;
 }
-#endif
 
-#ifdef CONFIG_X86_64
+/*
+ * Did it hit the DOS screen memory VA from vm86 mode?
+ */
+static inline void
+check_v8086_mode(struct pt_regs *regs, unsigned long address,
+		 struct task_struct *tsk)
+{
+	unsigned long bit;
+
+	if (!v8086_mode(regs))
+		return;
+
+	bit = (address - 0xA0000) >> PAGE_SHIFT;
+	if (bit < 32)
+		tsk->thread.screen_bitmap |= 1 << bit;
+}
+
+#else /* CONFIG_X86_64: */
+
 static const char errata93_warning[] =
 KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
 KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
 KERN_ERR "******* Please consider a BIOS update.\n"
 KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+
+/*
+ * No vm86 mode in 64-bit mode:
+ */
+static inline void
+check_v8086_mode(struct pt_regs *regs, unsigned long address,
+		 struct task_struct *tsk)
+{
+}
+
 #endif
 
 /*
@@ -1091,16 +1118,8 @@ good_area:
 	else
 		tsk->min_flt++;
 
-#ifdef CONFIG_X86_32
-	/*
-	 * Did it hit the DOS screen memory VA from vm86 mode?
-	 */
-	if (v8086_mode(regs)) {
-		unsigned long bit = (address - 0xA0000) >> PAGE_SHIFT;
-		if (bit < 32)
-			tsk->thread.screen_bitmap |= 1 << bit;
-	}
-#endif
+	check_v8086_mode(regs, address, tsk);
+
 	up_read(&mm->mmap_sem);
 }
 
-- 
cgit v1.2.3


From 121d5d0a7e5808fbcfda484efd7ba840ac93450f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 22:18:08 +0100
Subject: x86, mm: fault.c, enable PF_RSVD checks on 32-bit too

Impact: improve page fault handling robustness

The 'PF_RSVD' flag (bit 3) of the page-fault error_code is a
relatively recent addition to x86 CPUs, so the 32-bit do_fault()
implementation never had it. This flag gets set when the CPU
detects nonzero values in any reserved bits of the page directory
entries.

Extend the existing 64-bit check for PF_RSVD in do_page_fault()
to 32-bit too. If we detect such a fault then we print a more
informative oops and the pagetables.

This unifies the code some more, removes an ugly #ifdef and improves
the 32-bit page fault code robustness a bit. It slightly increases
the 32-bit kernel text size.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 7dc0615c3cf..3e366146273 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -477,7 +477,6 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 	dump_pagetable(address);
 }
 
-#ifdef CONFIG_X86_64
 static noinline void
 pgtable_bad(struct pt_regs *regs, unsigned long error_code,
 	    unsigned long address)
@@ -503,7 +502,6 @@ pgtable_bad(struct pt_regs *regs, unsigned long error_code,
 
 	oops_end(flags, regs, sig);
 }
-#endif
 
 static noinline void
 no_context(struct pt_regs *regs, unsigned long error_code,
@@ -1015,10 +1013,8 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 			local_irq_enable();
 	}
 
-#ifdef CONFIG_X86_64
 	if (unlikely(error_code & PF_RSVD))
 		pgtable_bad(regs, error_code, address);
-#endif
 
 	/*
 	 * If we're in an interrupt, have no user context or are running
-- 
cgit v1.2.3


From b814d41f0987c7648d7ed07471258101c95c026b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 22:32:10 +0100
Subject: x86, mm: fault.c, simplify kmmio_fault()

Impact: cleanup

Remove an #ifdef from kmmio_fault() - we can do this by
providing default implementations for is_kmmio_active()
and kmmio_handler(). The compiler optimizes it all away
in the !CONFIG_MMIOTRACE case.

Also, while at it, clean up mmiotrace.h a bit:

 - standard header guards
 - standard vertical spaces for structure definitions

No code changed (both with mmiotrace on and off in the config):

   text	   data	    bss	    dec	    hex	filename
   2947	     12	     12	   2971	    b9b	fault.o.before
   2947	     12	     12	   2971	    b9b	fault.o.after

Cc: Pekka Paalanen <pq@iki.fi>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 3e366146273..fe99af4b86d 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -55,13 +55,14 @@ enum x86_pf_error_code {
 	PF_INSTR	=		1 << 4,
 };
 
+/*
+ * (returns 0 if mmiotrace is disabled)
+ */
 static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
 {
-#ifdef CONFIG_MMIOTRACE
 	if (unlikely(is_kmmio_active()))
 		if (kmmio_handler(regs, addr) == 1)
 			return -1;
-#endif
 	return 0;
 }
 
-- 
cgit v1.2.3


From b18018126f422f5b706fd750373425e10e84b486 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 22:42:57 +0100
Subject: x86, mm, kprobes: fault.c, simplify notify_page_fault()

Impact: cleanup

Remove an #ifdef from notify_page_fault(). The function still
compiles to nothing in the !CONFIG_KPROBES case.

Introduce kprobes_built_in() and kprobe_fault_handler() helpers
to allow this - they returns 0 if !CONFIG_KPROBES.

No code changed:

   text	   data	    bss	    dec	    hex	filename
   4618	     32	     24	   4674	   1242	fault.o.before
   4618	     32	     24	   4674	   1242	fault.o.after

Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fe99af4b86d..379beaec6ca 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -68,11 +68,10 @@ static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
 
 static inline int notify_page_fault(struct pt_regs *regs)
 {
-#ifdef CONFIG_KPROBES
 	int ret = 0;
 
 	/* kprobe_running() needs smp_processor_id() */
-	if (!user_mode_vm(regs)) {
+	if (kprobes_built_in() && !user_mode_vm(regs)) {
 		preempt_disable();
 		if (kprobe_running() && kprobe_fault_handler(regs, 14))
 			ret = 1;
@@ -80,9 +79,6 @@ static inline int notify_page_fault(struct pt_regs *regs)
 	}
 
 	return ret;
-#else
-	return 0;
-#endif
 }
 
 /*
-- 
cgit v1.2.3


From f2f13a8535174dbb813a0607a9d4737cfba98f6c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 22:50:24 +0100
Subject: x86, mm: fault.c, reorder functions

Impact: cleanup

Avoid a couple more #ifdefs by moving fundamentally non-unifiable
functions into a single #ifdef 32-bit / #else / #endif block in
fault.c: vmalloc*(), dump_pagetable(), check_vm8086_mode().

No code changed:

   text	   data	    bss	    dec	    hex	filename
   4618	     32	     24	   4674	   1242	fault.o.before
   4618	     32	     24	   4674	   1242	fault.o.after

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 474 ++++++++++++++++++++++++++--------------------------
 1 file changed, 239 insertions(+), 235 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 379beaec6ca..4ce62fb80da 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -191,18 +191,124 @@ force_sig_info_fault(int si_signo, int si_code, unsigned long address,
 	force_sig_info(si_signo, &info, tsk);
 }
 
-#ifdef CONFIG_X86_64
-static int bad_address(void *p)
+DEFINE_SPINLOCK(pgd_lock);
+LIST_HEAD(pgd_list);
+
+#ifdef CONFIG_X86_32
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 {
-	unsigned long dummy;
+	unsigned index = pgd_index(address);
+	pgd_t *pgd_k;
+	pud_t *pud, *pud_k;
+	pmd_t *pmd, *pmd_k;
 
-	return probe_kernel_address((unsigned long *)p, dummy);
+	pgd += index;
+	pgd_k = init_mm.pgd + index;
+
+	if (!pgd_present(*pgd_k))
+		return NULL;
+
+	/*
+	 * set_pgd(pgd, *pgd_k); here would be useless on PAE
+	 * and redundant with the set_pmd() on non-PAE. As would
+	 * set_pud.
+	 */
+	pud = pud_offset(pgd, address);
+	pud_k = pud_offset(pgd_k, address);
+	if (!pud_present(*pud_k))
+		return NULL;
+
+	pmd = pmd_offset(pud, address);
+	pmd_k = pmd_offset(pud_k, address);
+	if (!pmd_present(*pmd_k))
+		return NULL;
+
+	if (!pmd_present(*pmd)) {
+		set_pmd(pmd, *pmd_k);
+		arch_flush_lazy_mmu_mode();
+	} else {
+		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+	}
+
+	return pmd_k;
+}
+
+void vmalloc_sync_all(void)
+{
+	unsigned long address;
+
+	if (SHARED_KERNEL_PMD)
+		return;
+
+	for (address = VMALLOC_START & PMD_MASK;
+	     address >= TASK_SIZE && address < FIXADDR_TOP;
+	     address += PMD_SIZE) {
+
+		unsigned long flags;
+		struct page *page;
+
+		spin_lock_irqsave(&pgd_lock, flags);
+		list_for_each_entry(page, &pgd_list, lru) {
+			if (!vmalloc_sync_one(page_address(page), address))
+				break;
+		}
+		spin_unlock_irqrestore(&pgd_lock, flags);
+	}
+}
+
+/*
+ * 32-bit:
+ *
+ *   Handle a fault on the vmalloc or module mapping area
+ */
+static noinline int vmalloc_fault(unsigned long address)
+{
+	unsigned long pgd_paddr;
+	pmd_t *pmd_k;
+	pte_t *pte_k;
+
+	/* Make sure we are in vmalloc area: */
+	if (!(address >= VMALLOC_START && address < VMALLOC_END))
+		return -1;
+
+	/*
+	 * Synchronize this task's top level page-table
+	 * with the 'reference' page table.
+	 *
+	 * Do _not_ use "current" here. We might be inside
+	 * an interrupt in the middle of a task switch..
+	 */
+	pgd_paddr = read_cr3();
+	pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
+	if (!pmd_k)
+		return -1;
+
+	pte_k = pte_offset_kernel(pmd_k, address);
+	if (!pte_present(*pte_k))
+		return -1;
+
+	return 0;
+}
+
+/*
+ * Did it hit the DOS screen memory VA from vm86 mode?
+ */
+static inline void
+check_v8086_mode(struct pt_regs *regs, unsigned long address,
+		 struct task_struct *tsk)
+{
+	unsigned long bit;
+
+	if (!v8086_mode(regs))
+		return;
+
+	bit = (address - 0xA0000) >> PAGE_SHIFT;
+	if (bit < 32)
+		tsk->thread.screen_bitmap |= 1 << bit;
 }
-#endif
 
 static void dump_pagetable(unsigned long address)
 {
-#ifdef CONFIG_X86_32
 	__typeof__(pte_val(__pte(0))) page;
 
 	page = read_cr3();
@@ -239,7 +345,132 @@ static void dump_pagetable(unsigned long address)
 	}
 
 	printk("\n");
-#else /* CONFIG_X86_64 */
+}
+
+#else /* CONFIG_X86_64: */
+
+void vmalloc_sync_all(void)
+{
+	unsigned long address;
+
+	for (address = VMALLOC_START & PGDIR_MASK; address <= VMALLOC_END;
+	     address += PGDIR_SIZE) {
+
+		const pgd_t *pgd_ref = pgd_offset_k(address);
+		unsigned long flags;
+		struct page *page;
+
+		if (pgd_none(*pgd_ref))
+			continue;
+
+		spin_lock_irqsave(&pgd_lock, flags);
+		list_for_each_entry(page, &pgd_list, lru) {
+			pgd_t *pgd;
+			pgd = (pgd_t *)page_address(page) + pgd_index(address);
+			if (pgd_none(*pgd))
+				set_pgd(pgd, *pgd_ref);
+			else
+				BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+		}
+		spin_unlock_irqrestore(&pgd_lock, flags);
+	}
+}
+
+/*
+ * 64-bit:
+ *
+ *   Handle a fault on the vmalloc area
+ *
+ * This assumes no large pages in there.
+ */
+static noinline int vmalloc_fault(unsigned long address)
+{
+	pgd_t *pgd, *pgd_ref;
+	pud_t *pud, *pud_ref;
+	pmd_t *pmd, *pmd_ref;
+	pte_t *pte, *pte_ref;
+
+	/* Make sure we are in vmalloc area: */
+	if (!(address >= VMALLOC_START && address < VMALLOC_END))
+		return -1;
+
+	/*
+	 * Copy kernel mappings over when needed. This can also
+	 * happen within a race in page table update. In the later
+	 * case just flush:
+	 */
+	pgd = pgd_offset(current->active_mm, address);
+	pgd_ref = pgd_offset_k(address);
+	if (pgd_none(*pgd_ref))
+		return -1;
+
+	if (pgd_none(*pgd))
+		set_pgd(pgd, *pgd_ref);
+	else
+		BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
+
+	/*
+	 * Below here mismatches are bugs because these lower tables
+	 * are shared:
+	 */
+
+	pud = pud_offset(pgd, address);
+	pud_ref = pud_offset(pgd_ref, address);
+	if (pud_none(*pud_ref))
+		return -1;
+
+	if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
+		BUG();
+
+	pmd = pmd_offset(pud, address);
+	pmd_ref = pmd_offset(pud_ref, address);
+	if (pmd_none(*pmd_ref))
+		return -1;
+
+	if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
+		BUG();
+
+	pte_ref = pte_offset_kernel(pmd_ref, address);
+	if (!pte_present(*pte_ref))
+		return -1;
+
+	pte = pte_offset_kernel(pmd, address);
+
+	/*
+	 * Don't use pte_page here, because the mappings can point
+	 * outside mem_map, and the NUMA hash lookup cannot handle
+	 * that:
+	 */
+	if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
+		BUG();
+
+	return 0;
+}
+
+static const char errata93_warning[] =
+KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
+KERN_ERR "******* Please consider a BIOS update.\n"
+KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+
+/*
+ * No vm86 mode in 64-bit mode:
+ */
+static inline void
+check_v8086_mode(struct pt_regs *regs, unsigned long address,
+		 struct task_struct *tsk)
+{
+}
+
+static int bad_address(void *p)
+{
+	unsigned long dummy;
+
+	return probe_kernel_address((unsigned long *)p, dummy);
+}
+
+static void dump_pagetable(unsigned long address)
+{
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
@@ -284,83 +515,9 @@ out:
 	return;
 bad:
 	printk("BAD\n");
-#endif
-}
-
-#ifdef CONFIG_X86_32
-static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
-{
-	unsigned index = pgd_index(address);
-	pgd_t *pgd_k;
-	pud_t *pud, *pud_k;
-	pmd_t *pmd, *pmd_k;
-
-	pgd += index;
-	pgd_k = init_mm.pgd + index;
-
-	if (!pgd_present(*pgd_k))
-		return NULL;
-
-	/*
-	 * set_pgd(pgd, *pgd_k); here would be useless on PAE
-	 * and redundant with the set_pmd() on non-PAE. As would
-	 * set_pud.
-	 */
-	pud = pud_offset(pgd, address);
-	pud_k = pud_offset(pgd_k, address);
-	if (!pud_present(*pud_k))
-		return NULL;
-
-	pmd = pmd_offset(pud, address);
-	pmd_k = pmd_offset(pud_k, address);
-	if (!pmd_present(*pmd_k))
-		return NULL;
-
-	if (!pmd_present(*pmd)) {
-		set_pmd(pmd, *pmd_k);
-		arch_flush_lazy_mmu_mode();
-	} else {
-		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
-	}
-
-	return pmd_k;
-}
-
-/*
- * Did it hit the DOS screen memory VA from vm86 mode?
- */
-static inline void
-check_v8086_mode(struct pt_regs *regs, unsigned long address,
-		 struct task_struct *tsk)
-{
-	unsigned long bit;
-
-	if (!v8086_mode(regs))
-		return;
-
-	bit = (address - 0xA0000) >> PAGE_SHIFT;
-	if (bit < 32)
-		tsk->thread.screen_bitmap |= 1 << bit;
-}
-
-#else /* CONFIG_X86_64: */
-
-static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
-
-/*
- * No vm86 mode in 64-bit mode:
- */
-static inline void
-check_v8086_mode(struct pt_regs *regs, unsigned long address,
-		 struct task_struct *tsk)
-{
 }
 
-#endif
+#endif /* CONFIG_X86_64 */
 
 /*
  * Workaround for K8 erratum #93 & buggy BIOS.
@@ -795,109 +952,6 @@ spurious_fault(unsigned long error_code, unsigned long address)
 	return ret;
 }
 
-/*
- * 32-bit:
- *
- *   Handle a fault on the vmalloc or module mapping area
- *
- * 64-bit:
- *
- *   Handle a fault on the vmalloc area
- *
- * This assumes no large pages in there.
- */
-static noinline int vmalloc_fault(unsigned long address)
-{
-#ifdef CONFIG_X86_32
-	unsigned long pgd_paddr;
-	pmd_t *pmd_k;
-	pte_t *pte_k;
-
-	/* Make sure we are in vmalloc area: */
-	if (!(address >= VMALLOC_START && address < VMALLOC_END))
-		return -1;
-
-	/*
-	 * Synchronize this task's top level page-table
-	 * with the 'reference' page table.
-	 *
-	 * Do _not_ use "current" here. We might be inside
-	 * an interrupt in the middle of a task switch..
-	 */
-	pgd_paddr = read_cr3();
-	pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
-	if (!pmd_k)
-		return -1;
-
-	pte_k = pte_offset_kernel(pmd_k, address);
-	if (!pte_present(*pte_k))
-		return -1;
-
-	return 0;
-#else
-	pgd_t *pgd, *pgd_ref;
-	pud_t *pud, *pud_ref;
-	pmd_t *pmd, *pmd_ref;
-	pte_t *pte, *pte_ref;
-
-	/* Make sure we are in vmalloc area: */
-	if (!(address >= VMALLOC_START && address < VMALLOC_END))
-		return -1;
-
-	/*
-	 * Copy kernel mappings over when needed. This can also
-	 * happen within a race in page table update. In the later
-	 * case just flush:
-	 */
-	pgd = pgd_offset(current->active_mm, address);
-	pgd_ref = pgd_offset_k(address);
-	if (pgd_none(*pgd_ref))
-		return -1;
-
-	if (pgd_none(*pgd))
-		set_pgd(pgd, *pgd_ref);
-	else
-		BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
-
-	/*
-	 * Below here mismatches are bugs because these lower tables
-	 * are shared:
-	 */
-
-	pud = pud_offset(pgd, address);
-	pud_ref = pud_offset(pgd_ref, address);
-	if (pud_none(*pud_ref))
-		return -1;
-
-	if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
-		BUG();
-
-	pmd = pmd_offset(pud, address);
-	pmd_ref = pmd_offset(pud_ref, address);
-	if (pmd_none(*pmd_ref))
-		return -1;
-
-	if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
-		BUG();
-
-	pte_ref = pte_offset_kernel(pmd_ref, address);
-	if (!pte_present(*pte_ref))
-		return -1;
-
-	pte = pte_offset_kernel(pmd, address);
-
-	/*
-	 * Don't use pte_page here, because the mappings can point
-	 * outside mem_map, and the NUMA hash lookup cannot handle
-	 * that:
-	 */
-	if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref))
-		BUG();
-
-	return 0;
-#endif
-}
-
 int show_unhandled_signals = 1;
 
 static inline int
@@ -1115,53 +1169,3 @@ good_area:
 
 	up_read(&mm->mmap_sem);
 }
-
-DEFINE_SPINLOCK(pgd_lock);
-LIST_HEAD(pgd_list);
-
-void vmalloc_sync_all(void)
-{
-	unsigned long address;
-
-#ifdef CONFIG_X86_32
-	if (SHARED_KERNEL_PMD)
-		return;
-
-	for (address = VMALLOC_START & PMD_MASK;
-	     address >= TASK_SIZE && address < FIXADDR_TOP;
-	     address += PMD_SIZE) {
-
-		unsigned long flags;
-		struct page *page;
-
-		spin_lock_irqsave(&pgd_lock, flags);
-		list_for_each_entry(page, &pgd_list, lru) {
-			if (!vmalloc_sync_one(page_address(page), address))
-				break;
-		}
-		spin_unlock_irqrestore(&pgd_lock, flags);
-	}
-#else /* CONFIG_X86_64 */
-	for (address = VMALLOC_START & PGDIR_MASK; address <= VMALLOC_END;
-	     address += PGDIR_SIZE) {
-
-		const pgd_t *pgd_ref = pgd_offset_k(address);
-		unsigned long flags;
-		struct page *page;
-
-		if (pgd_none(*pgd_ref))
-			continue;
-
-		spin_lock_irqsave(&pgd_lock, flags);
-		list_for_each_entry(page, &pgd_list, lru) {
-			pgd_t *pgd;
-			pgd = (pgd_t *)page_address(page) + pgd_index(address);
-			if (pgd_none(*pgd))
-				set_pgd(pgd, *pgd_ref);
-			else
-				BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref));
-		}
-		spin_unlock_irqrestore(&pgd_lock, flags);
-	}
-#endif
-}
-- 
cgit v1.2.3


From 8f7661496cece8320137d5e26808825498fd2b26 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:00:29 +0100
Subject: x86, mm: fault.c, unify oops printing

Impact: refine/extend page fault related oops printing on 64-bit

 - honor the pause_on_oops logic on 64-bit too
 - print out NX fault warnings on 64-bit as well
 - factor out the NX fault message to make it git-greppable and readable

Note that this means that we do the PF_INSTR check on 32-bit non-PAE
as well where it should not occur ... normally. Cannot hurt.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 4ce62fb80da..ebfaca3bbb1 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -595,28 +595,24 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
 	return 0;
 }
 
+static const char nx_warning[] = KERN_CRIT
+"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n";
+
 static void
 show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 		unsigned long address)
 {
-#ifdef CONFIG_X86_32
 	if (!oops_may_print())
 		return;
-#endif
 
-#ifdef CONFIG_X86_PAE
 	if (error_code & PF_INSTR) {
 		unsigned int level;
 
 		pte_t *pte = lookup_address(address, &level);
 
-		if (pte && pte_present(*pte) && !pte_exec(*pte)) {
-			printk(KERN_CRIT "kernel tried to execute "
-				"NX-protected page - exploit attempt? "
-				"(uid: %d)\n", current_uid());
-		}
+		if (pte && pte_present(*pte) && !pte_exec(*pte))
+			printk(nx_warning, current_uid());
 	}
-#endif
 
 	printk(KERN_ALERT "BUG: unable to handle kernel ");
 	if (address < PAGE_SIZE)
-- 
cgit v1.2.3


From 1cc99544dde9e48602979f16b9309fade6e93051 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:07:48 +0100
Subject: x86, mm: fault.c, unify oops handling

Impact: add oops-recursion check to 32-bit

Unify the oops state-machine, to the 64-bit version. It is
slightly more careful in that it does a recursion check
in oops_begin(), and is thus more likely to show the relevant
oops.

It also means that 32-bit will print one more line at the
end of pagefault triggered oopses:

 	printk(KERN_EMERG "CR2: %016lx\n", address);

Which is generally good information to be seen in partial-dump
digital-camera jpegs ;-)

The downside is the somewhat more complex critical path. Both
variants have been tested well meanwhile by kernel developers
crashing their boxes so i dont think this is a practical worry.

This removes 3 ugly #ifdefs from no_context() and makes the
function a lot nicer read.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index ebfaca3bbb1..8fe2dd254df 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -659,11 +659,8 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 {
 	struct task_struct *tsk = current;
 	unsigned long *stackend;
-
-#ifdef CONFIG_X86_64
 	unsigned long flags;
 	int sig;
-#endif
 
 	/* Are we prepared to handle this kernel fault? */
 	if (fixup_exception(regs))
@@ -690,11 +687,7 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice:
 	 */
-#ifdef CONFIG_X86_32
-	bust_spinlocks(1);
-#else
 	flags = oops_begin();
-#endif
 
 	show_fault_oops(regs, error_code, address);
 
@@ -702,15 +695,10 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	if (*stackend != STACK_END_MAGIC)
 		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
 
-	tsk->thread.cr2 = address;
-	tsk->thread.trap_no = 14;
-	tsk->thread.error_code = error_code;
+	tsk->thread.cr2		= address;
+	tsk->thread.trap_no	= 14;
+	tsk->thread.error_code	= error_code;
 
-#ifdef CONFIG_X86_32
-	die("Oops", regs, error_code);
-	bust_spinlocks(0);
-	do_exit(SIGKILL);
-#else
 	sig = SIGKILL;
 	if (__die("Oops", regs, error_code))
 		sig = 0;
@@ -719,7 +707,6 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	printk(KERN_EMERG "CR2: %016lx\n", address);
 
 	oops_end(flags, regs, sig);
-#endif
 }
 
 /*
-- 
cgit v1.2.3


From c3731c68668325abddee8665018c74c7156a57be Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:22:34 +0100
Subject: x86, mm: fault.c, remove #ifdef from do_page_fault()

Impact: cleanup

do_page_fault() has this ugly #ifdef in its prototype:

  #ifdef CONFIG_X86_64
  asmlinkage
  #endif
  void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)

Replace it with 'dotraplinkage' which maps to exactly the above
construct: nothing on 32-bit and asmlinkage on 64-bit.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 8fe2dd254df..9c2dc5d7953 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -972,10 +972,8 @@ static int fault_in_kernel_space(unsigned long address)
  * and the problem, and then passes it off to one of the appropriate
  * routines.
  */
-#ifdef CONFIG_X86_64
-asmlinkage
-#endif
-void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
+dotraplinkage void __kprobes
+do_page_fault(struct pt_regs *regs, unsigned long error_code)
 {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
-- 
cgit v1.2.3


From d951734654f76a370a89b4e531af9b765bd13541 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:32:28 +0100
Subject: x86, mm: rename TASK_SIZE64 => TASK_SIZE_MAX

Impact: cleanup

Rename TASK_SIZE64 to TASK_SIZE_MAX, and provide the
define on 32-bit too. (mapped to TASK_SIZE)

This allows 32-bit code to make use of the (former-) TASK_SIZE64
symbol as well, in a clean way.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h | 9 +++++----
 arch/x86/kernel/ptrace.c         | 2 +-
 arch/x86/mm/fault.c              | 2 +-
 arch/x86/vdso/vma.c              | 4 ++--
 4 files changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 72914d0315e..c7a98f73821 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -861,6 +861,7 @@ static inline void spin_lock_prefetch(const void *x)
  * User space process size: 3GB (default).
  */
 #define TASK_SIZE		PAGE_OFFSET
+#define TASK_SIZE_MAX		TASK_SIZE
 #define STACK_TOP		TASK_SIZE
 #define STACK_TOP_MAX		STACK_TOP
 
@@ -920,7 +921,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 /*
  * User space process size. 47bits minus one guard page.
  */
-#define TASK_SIZE64	((1UL << 47) - PAGE_SIZE)
+#define TASK_SIZE_MAX	((1UL << 47) - PAGE_SIZE)
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
@@ -929,12 +930,12 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 					0xc0000000 : 0xFFFFe000)
 
 #define TASK_SIZE		(test_thread_flag(TIF_IA32) ? \
-					IA32_PAGE_OFFSET : TASK_SIZE64)
+					IA32_PAGE_OFFSET : TASK_SIZE_MAX)
 #define TASK_SIZE_OF(child)	((test_tsk_thread_flag(child, TIF_IA32)) ? \
-					IA32_PAGE_OFFSET : TASK_SIZE64)
+					IA32_PAGE_OFFSET : TASK_SIZE_MAX)
 
 #define STACK_TOP		TASK_SIZE
-#define STACK_TOP_MAX		TASK_SIZE64
+#define STACK_TOP_MAX		TASK_SIZE_MAX
 
 #define INIT_THREAD  { \
 	.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index d2f7cd5b2c8..fb2159a5c81 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -268,7 +268,7 @@ static unsigned long debugreg_addr_limit(struct task_struct *task)
 	if (test_tsk_thread_flag(task, TIF_IA32))
 		return IA32_PAGE_OFFSET - 3;
 #endif
-	return TASK_SIZE64 - 7;
+	return TASK_SIZE_MAX - 7;
 }
 
 #endif	/* CONFIG_X86_32 */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9c2dc5d7953..6fa9f175cba 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -963,7 +963,7 @@ static int fault_in_kernel_space(unsigned long address)
 #ifdef CONFIG_X86_32
 	return address >= TASK_SIZE;
 #else
-	return address >= TASK_SIZE64;
+	return address >= TASK_SIZE_MAX;
 #endif
 }
 
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 9c98cc6ba97..7133cdf9098 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -85,8 +85,8 @@ static unsigned long vdso_addr(unsigned long start, unsigned len)
 	unsigned long addr, end;
 	unsigned offset;
 	end = (start + PMD_SIZE - 1) & PMD_MASK;
-	if (end >= TASK_SIZE64)
-		end = TASK_SIZE64;
+	if (end >= TASK_SIZE_MAX)
+		end = TASK_SIZE_MAX;
 	end -= len;
 	/* This loses some more bits than a modulo, but is cheaper */
 	offset = get_random_int() & (PTRS_PER_PTE - 1);
-- 
cgit v1.2.3


From 7c178a26d3e753d2a4346d3e4b8aa549d387f698 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:27:29 +0100
Subject: x86, mm: fault.c, remove #ifdef from fault_in_kernel_space()

Impact: cleanup

Removal of an #ifdef in fault_in_kernel_space(), by making
use of the new TASK_SIZE_MAX symbol which is now available
on 32-bit too.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 6fa9f175cba..f195691ec26 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -960,11 +960,7 @@ access_error(unsigned long error_code, int write, struct vm_area_struct *vma)
 
 static int fault_in_kernel_space(unsigned long address)
 {
-#ifdef CONFIG_X86_32
-	return address >= TASK_SIZE;
-#else
 	return address >= TASK_SIZE_MAX;
-#endif
 }
 
 /*
-- 
cgit v1.2.3


From cd1b68f08f6328737928e5b8ba8ef80394680ff0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:39:02 +0100
Subject: x86, mm: fault.c, give another attempt at prefetch handing before
 SIGBUS

Impact: extend prefetch handling on 64-bit

Currently there's an extra is_prefetch() check done in do_sigbus(),
which we only do on 32 bits.

This is a last-ditch check before we terminate a task, so it's worth
giving prefetch instructions another chance - should none of our
existing quirks have caught a prefetch instruction related spurious
fault.

The only risk is if a prefetch causes a real sigbus, in that case
we'll not OOM but try another fault. But this code has been on
32-bit for a long time, so it should be fine in practice.

So do this on 64-bit too - and thus remove one more #ifdef.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index f195691ec26..413e835e4a8 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -836,11 +836,9 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
 	if (!(error_code & PF_USER))
 		no_context(regs, error_code, address);
 
-#ifdef CONFIG_X86_32
-	/* User space => ok to do another page fault: */
+	/* User-space => ok to do another page fault: */
 	if (is_prefetch(regs, error_code, address))
 		return;
-#endif
 
 	tsk->thread.cr2		= address;
 	tsk->thread.error_code	= error_code;
-- 
cgit v1.2.3


From f8eeb2e6be367d79be3617f0a12646bced8b2fe6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 20 Feb 2009 23:13:36 +0100
Subject: x86, mm: fault.c, update copyrights

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 413e835e4a8..9bb07d331c3 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -1,6 +1,7 @@
 /*
  *  Copyright (C) 1995  Linus Torvalds
  *  Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
+ *  Copyright (C) 2008-2009, Red Hat Inc., Ingo Molnar
  */
 #include <linux/interrupt.h>
 #include <linux/mmiotrace.h>
-- 
cgit v1.2.3


From 7bc35b56f3e1548d039964d44e181c29398432b4 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Fri, 20 Feb 2009 10:16:01 +0100
Subject: [ARM] 5407/1: SA1100: drop broken for ages iPAQ h3800 support

Code has never been in buildable state since initial
merge.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                               |   2 +-
 arch/arm/mach-sa1100/Kconfig                   |  12 +-
 arch/arm/mach-sa1100/h3600.c                   | 392 ---------------------
 arch/arm/mach-sa1100/include/mach/h3600.h      |   2 +-
 arch/arm/mach-sa1100/include/mach/h3600_gpio.h | 463 -------------------------
 arch/arm/mach-sa1100/include/mach/irqs.h       |  22 --
 6 files changed, 3 insertions(+), 890 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5e0c5ab9560..12abdd43201 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1093,7 +1093,7 @@ source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_SA1100
 	bool
-	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
+	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
 	default y
 
 config CPU_FREQ_SA1110
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index f99d9013905..bfc38e31518 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,19 +71,9 @@ config SA1100_H3600
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
 	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
-config SA1100_H3800
-	bool "Compaq iPAQ H3800"
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
-	  series handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
-
 config SA1100_H3XXX
 	bool
-	depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
+	depends on SA1100_H3100 || SA1100_H3600
 	default y
 
 config SA1100_BADGE4
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index af25a78d705..b9aaa45c6ca 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -42,14 +42,7 @@
 #include <asm/mach/serial_sa1100.h>
 
 #include <mach/h3600.h>
-
-#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
 #include <mach/h3600_gpio.h>
-#endif
-
-#ifdef CONFIG_SA1100_H3800
-#include <mach/h3600_asic.h>
-#endif
 
 #include "generic.h"
 
@@ -519,388 +512,3 @@ MACHINE_END
 
 #endif /* CONFIG_SA1100_H3600 */
 
-#ifdef CONFIG_SA1100_H3800
-
-#define SET_ASIC1(x) \
-   do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
-
-#define SET_ASIC2(x) \
-   do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
-
-#define CLEAR_ASIC1(x) \
-   do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
-
-#define CLEAR_ASIC2(x) \
-   do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
-
-
-/*
-  On screen enable, we get
-
-     h3800_video_power_on(1)
-     LCD controller starts
-     h3800_video_lcd_enable(1)
-
-  On screen disable, we get
-
-     h3800_video_lcd_enable(0)
-     LCD controller stops
-     h3800_video_power_on(0)
-*/
-
-
-static void h3800_video_power_on(int setp)
-{
-	if (setp) {
-		H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
-		msleep(30);
-		H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
-		msleep(5);
-		H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
-		msleep(50);
-		H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
-		msleep(5);
-	} else {
-		msleep(5);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
-		msleep(50);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
-		msleep(5);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
-		msleep(100);
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
-	}
-}
-
-static void h3800_video_lcd_enable(int setp)
-{
-	if (setp) {
-		msleep(17);	// Wait one from before turning on
-		H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
-	} else {
-		H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
-		msleep(30);	// Wait before turning off
-	}
-}
-
-
-static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		h3800_video_power_on(setp);
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		h3800_video_lcd_enable(setp);
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-	case IPAQ_EGPIO_AUDIO_ON:
-	case IPAQ_EGPIO_QMUTE:
-		printk("%s: error - should not be called\n", __func__);
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		SET_ASIC2(GPIO2_OPT_ON_NVRAM);
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		SET_ASIC2(GPIO2_OPT_ON);
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		SET_ASIC2(GPIO2_OPT_PCM_RESET);
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		SET_ASIC2(GPIO2_OPT_RESET);
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		CLEAR_ASIC1(GPIO1_IR_ON_N);
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		SET_ASIC1(GPIO1_RS232_ON);
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		H3800_ASIC2_FlashWP_VPP_ON = setp;
-		break;
-	}
-}
-
-static unsigned long h3800_read_egpio(void)
-{
-	return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
-}
-
-/* We need to fix ASIC2 GPIO over suspend/resume.  At the moment,
-   it doesn't appear that ASIC1 GPIO has the same problem */
-
-static int h3800_pm_callback(int req)
-{
-	static u16 asic1_data;
-	static u16 asic2_data;
-	int result = 0;
-
-	printk("%s %d\n", __func__, req);
-
-	switch (req) {
-	case PM_RESUME:
-		MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;  /* Set MSC2 correctly */
-
-		H3800_ASIC2_GPIOPIOD = asic2_data;
-		H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
-			| GPIO2_SD_DETECT
-			| GPIO2_EAR_IN_N
-			| GPIO2_USB_DETECT_N
-			| GPIO2_SD_CON_SLT;
-
-		H3800_ASIC1_GPIO_OUT = asic1_data;
-
-		if (ipaq_model_ops.pm_callback_aux)
-			result = ipaq_model_ops.pm_callback_aux(req);
-		break;
-
-	case PM_SUSPEND:
-		if (ipaq_model_ops.pm_callback_aux &&
-		     ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
-			return result;
-
-		asic1_data = H3800_ASIC1_GPIO_OUT;
-		asic2_data = H3800_ASIC2_GPIOPIOD;
-		break;
-	default:
-		printk("%s: unrecognized PM callback\n", __func__);
-		break;
-	}
-	return result;
-}
-
-static struct ipaq_model_ops h3800_model_ops __initdata = {
-	.generic_name	= "3800",
-	.control	= h3800_control_egpio,
-	.read		= h3800_read_egpio,
-	.pm_callback	= h3800_pm_callback
-};
-
-#define MAX_ASIC_ISR_LOOPS    20
-
-/* The order of these is important - see #include <mach/irqs.h> */
-static u32 kpio_irq_mask[] = {
-	KPIO_KEY_ALL,
-	KPIO_SPI_INT,
-	KPIO_OWM_INT,
-	KPIO_ADC_INT,
-	KPIO_UART_0_INT,
-	KPIO_UART_1_INT,
-	KPIO_TIMER_0_INT,
-	KPIO_TIMER_1_INT,
-	KPIO_TIMER_2_INT
-};
-
-static u32 gpio_irq_mask[] = {
-	GPIO2_PEN_IRQ,
-	GPIO2_SD_DETECT,
-	GPIO2_EAR_IN_N,
-	GPIO2_USB_DETECT_N,
-	GPIO2_SD_CON_SLT,
-};
-
-static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
-{
-	int i;
-
-	if (0) printk("%s: interrupt received\n", __func__);
-
-	desc->chip->ack(irq);
-
-	for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
-		u32 irq;
-		int j;
-
-		/* KPIO */
-		irq = H3800_ASIC2_KPIINTFLAG;
-		if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
-		for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
-			if (irq & kpio_irq_mask[j])
-				handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
-
-		/* GPIO2 */
-		irq = H3800_ASIC2_GPIINTFLAG;
-		if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
-		for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
-			if (irq & gpio_irq_mask[j])
-				handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
-	}
-
-	if (i >= MAX_ASIC_ISR_LOOPS)
-		printk("%s: interrupt processing overrun\n", __func__);
-
-	/* For level-based interrupts */
-	desc->chip->unmask(irq);
-
-}
-
-static struct irqaction h3800_irq = {
-	.name		= "h3800_asic",
-	.handler	= h3800_IRQ_demux,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-u32 kpio_int_shadow = 0;
-
-
-/* mask_ack <- IRQ is first serviced.
-       mask <- IRQ is disabled.
-     unmask <- IRQ is enabled
-
-     The INTCLR registers are poorly documented.  I believe that writing
-     a "1" to the register clears the specific interrupt, but the documentation
-     indicates writing a "0" clears the interrupt.  In any case, they shouldn't
-     be read (that's the INTFLAG register)
- */
-
-static void h3800_mask_ack_kpio_irq(unsigned int irq)
-{
-	u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
-	kpio_int_shadow &= ~mask;
-	H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-	H3800_ASIC2_KPIINTCLR  = mask;
-}
-
-static void h3800_mask_kpio_irq(unsigned int irq)
-{
-	u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
-	kpio_int_shadow &= ~mask;
-	H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_unmask_kpio_irq(unsigned int irq)
-{
-	u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
-	kpio_int_shadow |= mask;
-	H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_mask_ack_gpio_irq(unsigned int irq)
-{
-	u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
-	H3800_ASIC2_GPIINTSTAT &= ~mask;
-	H3800_ASIC2_GPIINTCLR	= mask;
-}
-
-static void h3800_mask_gpio_irq(unsigned int irq)
-{
-	u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
-	H3800_ASIC2_GPIINTSTAT &= ~mask;
-	}
-
-static void h3800_unmask_gpio_irq(unsigned int irq)
-{
-	u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
-	H3800_ASIC2_GPIINTSTAT |= mask;
-}
-
-static void __init h3800_init_irq(void)
-{
-	int i;
-
-	/* Initialize standard IRQs */
-	sa1100_init_irq();
-
-	/* Disable all IRQs and set up clock */
-	H3800_ASIC2_KPIINTSTAT	   =  0;     /* Disable all interrupts */
-	H3800_ASIC2_GPIINTSTAT	   =  0;
-
-	H3800_ASIC2_KPIINTCLR	   =  0;     /* Clear all KPIO interrupts */
-	H3800_ASIC2_GPIINTCLR	   =  0;     /* Clear all GPIO interrupts */
-
-//	H3800_ASIC2_KPIINTCLR	   =  0xffff;	  /* Clear all KPIO interrupts */
-//	H3800_ASIC2_GPIINTCLR	   =  0xffff;	  /* Clear all GPIO interrupts */
-
-	H3800_ASIC2_CLOCK_Enable       |= ASIC2_CLOCK_EX0;   /* 32 kHZ crystal on */
-	H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
-	H3800_ASIC2_INTR_ClockPrescale	= ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
-	H3800_ASIC2_INTR_TimerSet	= 1;
-
-#if 0
-	for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
-		int irq = i + H3800_KPIO_IRQ_START;
-		irq_desc[irq].valid    = 1;
-		irq_desc[irq].probe_ok = 1;
-		set_irq_chip(irq, &h3800_kpio_irqchip);
-	}
-
-	for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
-		int irq = i + H3800_GPIO_IRQ_START;
-		irq_desc[irq].valid    = 1;
-		irq_desc[irq].probe_ok = 1;
-		set_irq_chip(irq, &h3800_gpio_irqchip);
-	}
-#endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
-	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
-}
-
-
-#define ASIC1_OUTPUTS	 0x7fff   /* First 15 bits are used */
-
-static void __init h3800_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Add wakeup on AC plug/unplug */
-	PWER  |= PWER_GPIO12;
-
-	/* Initialize h3800-specific values here */
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GAFR =	GPIO_H3800_CLK_OUT |
-		GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-		GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-	GPDR =	GPIO_H3800_CLK_OUT |
-		GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-		GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-		GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-		GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-	TUCR =	TUCR_3_6864MHz;   /* Seems to be used only for the Bluetooth UART */
-
-	/* Fix the memory bus */
-	MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
-
-	/* Set up ASIC #1 */
-	H3800_ASIC1_GPIO_DIR		= ASIC1_OUTPUTS;	    /* All outputs */
-	H3800_ASIC1_GPIO_MASK		= ASIC1_OUTPUTS;	    /* No interrupts */
-	H3800_ASIC1_GPIO_SLEEP_MASK	= ASIC1_OUTPUTS;
-	H3800_ASIC1_GPIO_SLEEP_DIR	= ASIC1_OUTPUTS;
-	H3800_ASIC1_GPIO_SLEEP_OUT	= GPIO1_EAR_ON_N;
-	H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
-	H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
-
-	H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
-				      | GPIO1_RS232_ON
-				      | GPIO1_EAR_ON_N;
-
-	/* Set up ASIC #2 */
-	H3800_ASIC2_GPIOPIOD	= GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-	H3800_ASIC2_GPOBFSTAT	= GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-
-	H3800_ASIC2_GPIODIR	= GPIO2_PEN_IRQ
-				      | GPIO2_SD_DETECT
-				      | GPIO2_EAR_IN_N
-				      | GPIO2_USB_DETECT_N
-				      | GPIO2_SD_CON_SLT;
-
-	/* TODO : Set sleep states & battery fault states */
-
-	/* Clear VPP Enable */
-	H3800_ASIC2_FlashWP_VPP_ON = 0;
-	ipaq_model_ops = h3800_model_ops;
-}
-
-MACHINE_START(H3800, "Compaq iPAQ H3800")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
-	.map_io		= h3800_map_io,
-	.init_irq	= h3800_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3800 */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 9cc47fddb33..e692ab3dd79 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -29,7 +29,7 @@ typedef int __bitwise pm_request_t;
 #define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
 
 /* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
 
 /* Physical memory regions corresponding to chip selects */
 #define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index 62b0b787968..a36ca76d018 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -48,22 +48,11 @@
 #define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
 #define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
 
-/* H3800 specific pins */
-#define GPIO_H3800_AC_IN                GPIO_GPIO (12)
-#define GPIO_H3800_COM_DSR              GPIO_GPIO (13)
-#define GPIO_H3800_MMC_INT              GPIO_GPIO (18)
-#define GPIO_H3800_NOPT_IND             GPIO_GPIO (20)   /* Almost exactly the same as GPIO_H3600_OPT_DET */
-#define GPIO_H3800_OPT_BAT_FAULT        GPIO_GPIO (22)
-#define GPIO_H3800_CLK_OUT              GPIO_GPIO (27)
-
 /****************************************************/
 
 #define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
 #define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
 
-#define IRQ_GPIO_H3800_MMC_INT          IRQ_GPIO18
-#define IRQ_GPIO_H3800_NOPT_IND         IRQ_GPIO20 /* almost same as OPT_DET */
-
 /* H3100 / 3600 EGPIO pins */
 #define EGPIO_H3600_VPP_ON		(1 << 0)
 #define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
@@ -84,457 +73,5 @@
 #define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
 #define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
 
-/********************* H3800, ASIC #2 ********************/
-
-#define _H3800_ASIC2_Base            (H3600_EGPIO_VIRT)
-#define H3800_ASIC2_OFFSET(s,x,y)    \
-    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-#define H3800_ASIC2_NOFFSET(s,x,n,y) \
-    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-
-#define _H3800_ASIC2_GPIO_Base                 0x0000
-#define _H3800_ASIC2_GPIO_Direction            0x0000    /* R/W, 16 bits 1:input, 0:output */
-#define _H3800_ASIC2_GPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
-#define _H3800_ASIC2_GPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_GPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
-#define _H3800_ASIC2_GPIO_InterruptClear       0x0010    /* W,   12 bits */
-#define _H3800_ASIC2_GPIO_InterruptFlag        0x0010    /* R,   12 bits - reads int status */
-#define _H3800_ASIC2_GPIO_Data                 0x0014    /* R/W, 16 bits */
-#define _H3800_ASIC2_GPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_GPIO_InterruptEnable      0x001c    /* R/W, 12 bits 1:enable interrupt */
-#define _H3800_ASIC2_GPIO_Alternate            0x003c    /* R/W, 12+1 bits - set alternate functions */
-
-#define H3800_ASIC2_GPIO_Direction          H3800_ASIC2_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC2_GPIO_InterruptType      H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
-#define H3800_ASIC2_GPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
-#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
-#define H3800_ASIC2_GPIO_InterruptClear     H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
-#define H3800_ASIC2_GPIO_InterruptFlag      H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
-#define H3800_ASIC2_GPIO_Data               H3800_ASIC2_OFFSET( u16, GPIO, Data )
-#define H3800_ASIC2_GPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
-#define H3800_ASIC2_GPIO_InterruptEnable    H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
-#define H3800_ASIC2_GPIO_Alternate          H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
-
-#define GPIO_H3800_ASIC2_IN_Y1_N          (1 << 0)   /* Output: Touchscreen Y1 */
-#define GPIO_H3800_ASIC2_IN_X0            (1 << 1)   /* Output: Touchscreen X0 */
-#define GPIO_H3800_ASIC2_IN_Y0            (1 << 2)   /* Output: Touchscreen Y0 */
-#define GPIO_H3800_ASIC2_IN_X1_N          (1 << 3)   /* Output: Touchscreen X1 */
-#define GPIO_H3800_ASIC2_BT_RST           (1 << 4)   /* Output: Bluetooth reset */
-#define GPIO_H3800_ASIC2_PEN_IRQ          (1 << 5)   /* Input : Pen down        */
-#define GPIO_H3800_ASIC2_SD_DETECT        (1 << 6)   /* Input : SD detect */
-#define GPIO_H3800_ASIC2_EAR_IN_N         (1 << 7)   /* Input : Audio jack plug inserted */
-#define GPIO_H3800_ASIC2_OPT_PCM_RESET    (1 << 8)   /* Output: */
-#define GPIO_H3800_ASIC2_OPT_RESET        (1 << 9)   /* Output: */
-#define GPIO_H3800_ASIC2_USB_DETECT_N     (1 << 10)  /* Input : */
-#define GPIO_H3800_ASIC2_SD_CON_SLT       (1 << 11)  /* Input : */
-
-#define _H3800_ASIC2_KPIO_Base                 0x0200
-#define _H3800_ASIC2_KPIO_Direction            0x0000    /* R/W, 12 bits 1:input, 0:output */
-#define _H3800_ASIC2_KPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
-#define _H3800_ASIC2_KPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_KPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
-#define _H3800_ASIC2_KPIO_InterruptClear       0x0010    /* W,   20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_InterruptFlag        0x0010    /* R,   20 bits - 8 special - reads int status */
-#define _H3800_ASIC2_KPIO_Data                 0x0014    /* R/W, 16 bits */
-#define _H3800_ASIC2_KPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_KPIO_InterruptEnable      0x001c    /* R/W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_Alternate            0x003c    /* R/W, 6 bits */
-
-#define H3800_ASIC2_KPIO_Direction          H3800_ASIC2_OFFSET( u16, KPIO, Direction )
-#define H3800_ASIC2_KPIO_InterruptType      H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
-#define H3800_ASIC2_KPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
-#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
-#define H3800_ASIC2_KPIO_InterruptClear     H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
-#define H3800_ASIC2_KPIO_InterruptFlag      H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
-#define H3800_ASIC2_KPIO_Data               H3800_ASIC2_OFFSET( u16, KPIO, Data )
-#define H3800_ASIC2_KPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
-#define H3800_ASIC2_KPIO_InterruptEnable    H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
-#define H3800_ASIC2_KPIO_Alternate          H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
-
-#define H3800_ASIC2_KPIO_SPI_INT        ( 1 << 16 )
-#define H3800_ASIC2_KPIO_OWM_INT        ( 1 << 17 )
-#define H3800_ASIC2_KPIO_ADC_INT        ( 1 << 18 )
-#define H3800_ASIC2_KPIO_UART_0_INT     ( 1 << 19 )
-#define H3800_ASIC2_KPIO_UART_1_INT     ( 1 << 20 )
-#define H3800_ASIC2_KPIO_TIMER_0_INT    ( 1 << 21 )
-#define H3800_ASIC2_KPIO_TIMER_1_INT    ( 1 << 22 )
-#define H3800_ASIC2_KPIO_TIMER_2_INT    ( 1 << 23 )
-
-#define KPIO_H3800_ASIC2_RECORD_BTN_N     (1 << 0)   /* Record button */
-#define KPIO_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Keypad */
-#define KPIO_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* */
-#define KPIO_H3800_ASIC2_KEY_LEFT_N       (1 << 6)   /* */
-#define KPIO_H3800_ASIC2_KEY_RIGHT_N      (1 << 7)   /* */
-#define KPIO_H3800_ASIC2_KEY_AP1_N        (1 << 8)   /* Old "Calendar" */
-#define KPIO_H3800_ASIC2_KEY_AP2_N        (1 << 9)   /* Old "Schedule" */
-#define KPIO_H3800_ASIC2_KEY_AP3_N        (1 << 10)  /* Old "Q"        */
-#define KPIO_H3800_ASIC2_KEY_AP4_N        (1 << 11)  /* Old "Undo"     */
-
-/* Alternate KPIO functions (set by default) */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Action key */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* J1 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* J2 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* J3 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* J4 of keypad input */
-
-#define _H3800_ASIC2_SPI_Base                  0x0400
-#define _H3800_ASIC2_SPI_Control               0x0000    /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_Data                  0x0004    /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_ChipSelectDisabled    0x0008    /* W   8 bits */
-
-#define H3800_ASIC2_SPI_Control             H3800_ASIC2_OFFSET( u8, SPI, Control )
-#define H3800_ASIC2_SPI_Data                H3800_ASIC2_OFFSET( u8, SPI, Data )
-#define H3800_ASIC2_SPI_ChipSelectDisabled  H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
-
-#define _H3800_ASIC2_PWM_0_Base                0x0600
-#define _H3800_ASIC2_PWM_1_Base                0x0700
-#define _H3800_ASIC2_PWM_TimeBase              0x0000    /* R/W 6 bits */
-#define _H3800_ASIC2_PWM_PeriodTime            0x0004    /* R/W 12 bits */
-#define _H3800_ASIC2_PWM_DutyTime              0x0008    /* R/W 12 bits */
-
-#define H3800_ASIC2_PWM_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 0, TimeBase )
-#define H3800_ASIC2_PWM_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
-#define H3800_ASIC2_PWM_0_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
-
-#define H3800_ASIC2_PWM_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 1, TimeBase )
-#define H3800_ASIC2_PWM_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
-#define H3800_ASIC2_PWM_1_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
-
-#define H3800_ASIC2_PWM_TIMEBASE_MASK             0xf    /* Low 4 bits sets time base, max = 8 */
-#define H3800_ASIC2_PWM_TIMEBASE_ENABLE    ( 1 << 4 )    /* Enable clock */
-#define H3800_ASIC2_PWM_TIMEBASE_CLEAR     ( 1 << 5 )    /* Clear the PWM */
-
-#define _H3800_ASIC2_LED_0_Base                0x0800
-#define _H3800_ASIC2_LED_1_Base                0x0880
-#define _H3800_ASIC2_LED_2_Base                0x0900
-#define _H3800_ASIC2_LED_TimeBase              0x0000    /* R/W  7 bits */
-#define _H3800_ASIC2_LED_PeriodTime            0x0004    /* R/W 12 bits */
-#define _H3800_ASIC2_LED_DutyTime              0x0008    /* R/W 12 bits */
-#define _H3800_ASIC2_LED_AutoStopCount         0x000c    /* R/W 16 bits */
-
-#define H3800_ASIC2_LED_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 0, TimeBase )
-#define H3800_ASIC2_LED_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
-#define H3800_ASIC2_LED_0_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
-#define H3800_ASIC2_LED_0_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
-
-#define H3800_ASIC2_LED_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 1, TimeBase )
-#define H3800_ASIC2_LED_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
-#define H3800_ASIC2_LED_1_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
-#define H3800_ASIC2_LED_1_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
-
-#define H3800_ASIC2_LED_2_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 2, TimeBase )
-#define H3800_ASIC2_LED_2_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
-#define H3800_ASIC2_LED_2_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
-#define H3800_ASIC2_LED_2_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
-
-#define H3800_ASIC2_LED_TIMEBASE_MASK            0x0f    /* Low 4 bits sets time base, max = 13 */
-#define H3800_ASIC2_LED_TIMEBASE_BLINK     ( 1 << 4 )    /* Enable blinking */
-#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP  ( 1 << 5 )
-#define H3800_ASIC2_LED_TIMEBASE_ALWAYS    ( 1 << 6 )    /* Enable blink always */
-
-#define _H3800_ASIC2_UART_0_Base               0x0A00
-#define _H3800_ASIC2_UART_1_Base               0x0C00
-#define _H3800_ASIC2_UART_Receive              0x0000    /* R    8 bits */
-#define _H3800_ASIC2_UART_Transmit             0x0000    /*   W  8 bits */
-#define _H3800_ASIC2_UART_IntEnable            0x0004    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_IntVerify            0x0008    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_FIFOControl          0x000c    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_LineControl          0x0010    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_ModemStatus          0x0014    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_LineStatus           0x0018    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_ScratchPad           0x001c    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchL        0x0020    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchH        0x0024    /* R/W  8 bits */
-
-#define H3800_ASIC2_UART_0_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 0, Receive )
-#define H3800_ASIC2_UART_0_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 0, Transmit )
-#define H3800_ASIC2_UART_0_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntEnable )
-#define H3800_ASIC2_UART_0_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntVerify )
-#define H3800_ASIC2_UART_0_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, FIFOControl )
-#define H3800_ASIC2_UART_0_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, LineControl )
-#define H3800_ASIC2_UART_0_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 0, ModemStatus )
-#define H3800_ASIC2_UART_0_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 0, LineStatus )
-#define H3800_ASIC2_UART_0_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 0, ScratchPad )
-#define H3800_ASIC2_UART_0_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchL )
-#define H3800_ASIC2_UART_0_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchH )
-
-#define H3800_ASIC2_UART_1_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 1, Receive )
-#define H3800_ASIC2_UART_1_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 1, Transmit )
-#define H3800_ASIC2_UART_1_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntEnable )
-#define H3800_ASIC2_UART_1_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntVerify )
-#define H3800_ASIC2_UART_1_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, FIFOControl )
-#define H3800_ASIC2_UART_1_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, LineControl )
-#define H3800_ASIC2_UART_1_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 1, ModemStatus )
-#define H3800_ASIC2_UART_1_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 1, LineStatus )
-#define H3800_ASIC2_UART_1_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 1, ScratchPad )
-#define H3800_ASIC2_UART_1_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchL )
-#define H3800_ASIC2_UART_1_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchH )
-
-#define _H3800_ASIC2_TIMER_Base                0x0E00
-#define _H3800_ASIC2_TIMER_Command             0x0000    /* R/W  8 bits */
-
-#define H3800_ASIC2_TIMER_Command           H3800_ASIC2_OFFSET( u8, Timer, Command )
-
-#define H3800_ASIC2_TIMER_GAT_0            ( 1 << 0 )    /* Gate enable, counter 0 */
-#define H3800_ASIC2_TIMER_GAT_1            ( 1 << 1 )    /* Gate enable, counter 1 */
-#define H3800_ASIC2_TIMER_GAT_2            ( 1 << 2 )    /* Gate enable, counter 2 */
-#define H3800_ASIC2_TIMER_CLK_0            ( 1 << 3 )    /* Clock enable, counter 0 */
-#define H3800_ASIC2_TIMER_CLK_1            ( 1 << 4 )    /* Clock enable, counter 1 */
-#define H3800_ASIC2_TIMER_CLK_2            ( 1 << 5 )    /* Clock enable, counter 2 */
-#define H3800_ASIC2_TIMER_MODE_0           ( 1 << 6 )    /* Mode 0 enable, counter 0 */
-#define H3800_ASIC2_TIMER_MODE_1           ( 1 << 7 )    /* Mode 0 enable, counter 1 */
-
-#define _H3800_ASIC2_CLOCK_Base                0x1000
-#define _H3800_ASIC2_CLOCK_Enable              0x0000    /* R/W  18 bits */
-
-#define H3800_ASIC2_CLOCK_Enable            H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
-
-#define H3800_ASIC2_CLOCK_AUDIO_1              0x0001    /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_2              0x0002    /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_3              0x0004    /* Enable 5.6 MHz clock for 11 kHZ sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_4              0x0008    /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
-#define H3800_ASIC2_CLOCK_ADC              ( 1 << 4 )    /* 1.024 MHz clock to ADC */
-#define H3800_ASIC2_CLOCK_SPI              ( 1 << 5 )    /* 4.096 MHz clock to SPI */
-#define H3800_ASIC2_CLOCK_OWM              ( 1 << 6 )    /* 4.096 MHz clock to OWM */
-#define H3800_ASIC2_CLOCK_PWM              ( 1 << 7 )    /* 2.048 MHz clock to PWM */
-#define H3800_ASIC2_CLOCK_UART_1           ( 1 << 8 )    /* 24.576 MHz clock to UART1 (turn off bit 16) */
-#define H3800_ASIC2_CLOCK_UART_0           ( 1 << 9 )    /* 24.576 MHz clock to UART0 (turn off bit 17) */
-#define H3800_ASIC2_CLOCK_SD_1             ( 1 << 10 )   /* 16.934 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_2             ( 2 << 10 )   /* 24.576 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_3             ( 3 << 10 )   /* 33.869 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_4             ( 4 << 10 )   /* 49.152 MHz to SD */
-#define H3800_ASIC2_CLOCK_EX0              ( 1 << 13 )   /* Enable 32.768 kHz crystal */
-#define H3800_ASIC2_CLOCK_EX1              ( 1 << 14 )   /* Enable 24.576 MHz crystal */
-#define H3800_ASIC2_CLOCK_EX2              ( 1 << 15 )   /* Enable 33.869 MHz crystal */
-#define H3800_ASIC2_CLOCK_SLOW_UART_1      ( 1 << 16 )   /* Enable 3.686 MHz to UART1 (turn off bit 8) */
-#define H3800_ASIC2_CLOCK_SLOW_UART_0      ( 1 << 17 )   /* Enable 3.686 MHz to UART0 (turn off bit 9) */
-
-#define _H3800_ASIC2_ADC_Base                  0x1200
-#define _H3800_ASIC2_ADC_Multiplexer           0x0000    /* R/W 4 bits - low 3 bits set channel */
-#define _H3800_ASIC2_ADC_ControlStatus         0x0004    /* R/W 8 bits */
-#define _H3800_ASIC2_ADC_Data                  0x0008    /* R   10 bits */
-
-#define H3800_ASIC2_ADC_Multiplexer       H3800_ASIC2_OFFSET(  u8, ADC, Multiplexer )
-#define H3800_ASIC2_ADC_ControlStatus     H3800_ASIC2_OFFSET(  u8, ADC, ControlStatus )
-#define H3800_ASIC2_ADC_Data              H3800_ASIC2_OFFSET( u16, ADC, Data )
-
-#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK         0x07    /* Low 3 bits sets channel.  max = 4 */
-#define H3600_ASIC2_ADC_MUX_CLKEN          ( 1 << 3 )    /* Enable clock */
-
-#define H3600_ASIC2_ADC_CSR_ADPS_MASK            0x0f    /* Low 4 bits sets prescale, max = 8 */
-#define H3600_ASIC2_ADC_CSR_FREE_RUN       ( 1 << 4 )
-#define H3600_ASIC2_ADC_CSR_INT_ENABLE     ( 1 << 5 )
-#define H3600_ASIC2_ADC_CSR_START          ( 1 << 6 )    /* Set to start conversion.  Goes to 0 when done */
-#define H3600_ASIC2_ADC_CSR_ENABLE         ( 1 << 7 )    /* 1:power up ADC, 0:power down */
-
-
-#define _H3800_ASIC2_INTR_Base                 0x1600
-#define _H3800_ASIC2_INTR_MaskAndFlag          0x0000    /* R/(W) 8bits */
-#define _H3800_ASIC2_INTR_ClockPrescale        0x0004    /* R/(W) 5bits */
-#define _H3800_ASIC2_INTR_TimerSet             0x0008    /* R/(W) 8bits */
-
-#define H3800_ASIC2_INTR_MaskAndFlag      H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
-#define H3800_ASIC2_INTR_ClockPrescale    H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
-#define H3800_ASIC2_INTR_TimerSet         H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
-
-#define H3800_ASIC2_INTR_GLOBAL_MASK       ( 1 << 0 )    /* Global interrupt mask */
-#define H3800_ASIC2_INTR_POWER_ON_RESET    ( 1 << 1 )    /* 01: Power on reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_EXTERNAL_RESET    ( 2 << 1 )    /* 10: External reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_MASK_UART_0       ( 1 << 4 )
-#define H3800_ASIC2_INTR_MASK_UART_1       ( 1 << 5 )
-#define H3800_ASIC2_INTR_MASK_TIMER        ( 1 << 6 )
-#define H3800_ASIC2_INTR_MASK_OWM          ( 1 << 7 )
-
-#define H3800_ASIC2_INTR_CLOCK_PRESCALE          0x0f    /* 4 bits, max 14 */
-#define H3800_ASIC2_INTR_SET               ( 1 << 4 )    /* Time base enable */
-
-
-#define _H3800_ASIC2_OWM_Base                  0x1800
-#define _H3800_ASIC2_OWM_Command               0x0000    /* R/W 4 bits command register */
-#define _H3800_ASIC2_OWM_Data                  0x0004    /* R/W 8 bits, transmit / receive buffer */
-#define _H3800_ASIC2_OWM_Interrupt             0x0008    /* R/W Command register */
-#define _H3800_ASIC2_OWM_InterruptEnable       0x000c    /* R/W Command register */
-#define _H3800_ASIC2_OWM_ClockDivisor          0x0010    /* R/W 5 bits of divisor and pre-scale */
-
-#define H3800_ASIC2_OWM_Command            H3800_ASIC2_OFFSET( u8, OWM, Command )
-#define H3800_ASIC2_OWM_Data               H3800_ASIC2_OFFSET( u8, OWM, Data )
-#define H3800_ASIC2_OWM_Interrupt          H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
-#define H3800_ASIC2_OWM_InterruptEnable    H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
-#define H3800_ASIC2_OWM_ClockDivisor       H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
-
-#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 )    /* Set to force reset on 1-wire bus */
-#define H3800_ASIC2_OWM_CMD_SRA            ( 1 << 1 )    /* Set to switch to Search ROM accelerator mode */
-#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT      ( 1 << 2 )    /* Write only - forces bus low */
-#define H3800_ASIC2_OWM_CMD_DQ_INPUT       ( 1 << 3 )    /* Read only - reflects state of bus */
-
-#define H3800_ASIC2_OWM_INT_PD             ( 1 << 0 )    /* Presence detect */
-#define H3800_ASIC2_OWM_INT_PDR            ( 1 << 1 )    /* Presence detect result */
-#define H3800_ASIC2_OWM_INT_TBE            ( 1 << 2 )    /* Transmit buffer empty */
-#define H3800_ASIC2_OWM_INT_TEMT           ( 1 << 3 )    /* Transmit shift register empty */
-#define H3800_ASIC2_OWM_INT_RBF            ( 1 << 4 )    /* Receive buffer full */
-
-#define H3800_ASIC2_OWM_INTEN_EPD          ( 1 << 0 )    /* Enable receive buffer full interrupt */
-#define H3800_ASIC2_OWM_INTEN_IAS          ( 1 << 1 )    /* Enable transmit shift register empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETBE         ( 1 << 2 )    /* Enable transmit buffer empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETMT         ( 1 << 3 )    /* INTR active state */
-#define H3800_ASIC2_OWM_INTEN_ERBF         ( 1 << 4 )    /* Enable presence detect interrupt */
-
-#define _H3800_ASIC2_FlashCtl_Base             0x1A00
-
-/****************************************************/
-/* H3800, ASIC #1
- * This ASIC is accesed through ASIC #2, and
- * mapped into the 1c00 - 1f00 region
- */
-
-#define H3800_ASIC1_OFFSET(s,x,y)   \
-     (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
-
-#define _H3800_ASIC1_MMC_Base             0x1c00
-
-#define _H3800_ASIC1_MMC_StartStopClock     0x00    /* R/W 8bit                                  */
-#define _H3800_ASIC1_MMC_Status             0x02    /* R   See below, default 0x0040             */
-#define _H3800_ASIC1_MMC_ClockRate          0x04    /* R/W 8bit, low 3 bits are clock divisor    */
-#define _H3800_ASIC1_MMC_SPIRegister        0x08    /* R/W 8bit, see below                       */
-#define _H3800_ASIC1_MMC_CmdDataCont        0x0a    /* R/W 8bit, write to start MMC adapter      */
-#define _H3800_ASIC1_MMC_ResponseTimeout    0x0c    /* R/W 8bit, clocks before response timeout  */
-#define _H3800_ASIC1_MMC_ReadTimeout        0x0e    /* R/W 16bit, clocks before received data timeout */
-#define _H3800_ASIC1_MMC_BlockLength        0x10    /* R/W 10bit */
-#define _H3800_ASIC1_MMC_NumOfBlocks        0x12    /* R/W 16bit, in block mode, number of blocks  */
-#define _H3800_ASIC1_MMC_InterruptMask      0x1a    /* R/W 8bit */
-#define _H3800_ASIC1_MMC_CommandNumber      0x1c    /* R/W 6 bits */
-#define _H3800_ASIC1_MMC_ArgumentH          0x1e    /* R/W 16 bits  */
-#define _H3800_ASIC1_MMC_ArgumentL          0x20    /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ResFifo            0x22    /* R   8 x 16 bits - contains response FIFO */
-#define _H3800_ASIC1_MMC_BufferPartFull     0x28    /* R/W 8 bits */
-
-#define H3800_ASIC1_MMC_StartStopClock    H3800_ASIC1_OFFSET(  u8, MMC, StartStopClock )
-#define H3800_ASIC1_MMC_Status            H3800_ASIC1_OFFSET( u16, MMC, Status )
-#define H3800_ASIC1_MMC_ClockRate         H3800_ASIC1_OFFSET(  u8, MMC, ClockRate )
-#define H3800_ASIC1_MMC_SPIRegister       H3800_ASIC1_OFFSET(  u8, MMC, SPIRegister )
-#define H3800_ASIC1_MMC_CmdDataCont       H3800_ASIC1_OFFSET(  u8, MMC, CmdDataCont )
-#define H3800_ASIC1_MMC_ResponseTimeout   H3800_ASIC1_OFFSET(  u8, MMC, ResponseTimeout )
-#define H3800_ASIC1_MMC_ReadTimeout       H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
-#define H3800_ASIC1_MMC_BlockLength       H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
-#define H3800_ASIC1_MMC_NumOfBlocks       H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
-#define H3800_ASIC1_MMC_InterruptMask     H3800_ASIC1_OFFSET(  u8, MMC, InterruptMask )
-#define H3800_ASIC1_MMC_CommandNumber     H3800_ASIC1_OFFSET(  u8, MMC, CommandNumber )
-#define H3800_ASIC1_MMC_ArgumentH         H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
-#define H3800_ASIC1_MMC_ArgumentL         H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
-#define H3800_ASIC1_MMC_ResFifo           H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
-#define H3800_ASIC1_MMC_BufferPartFull    H3800_ASIC1_OFFSET(  u8, MMC, BufferPartFull )
-
-#define H3800_ASIC1_MMC_STOP_CLOCK                   (1 << 0)   /* Write to "StartStopClock" register */
-#define H3800_ASIC1_MMC_START_CLOCK                  (1 << 1)
-
-#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT          (1 << 0)
-#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT      (1 << 1)
-#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR       (1 << 2)
-#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR        (1 << 3)
-#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR        (1 << 4)  /* SPI data token error received */
-#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR    (1 << 5)
-#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY            (1 << 6)
-#define H3800_ASIC1_MMC_STATUS_FIFO_FULL             (1 << 7)
-#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE          (1 << 8)  /* MultiMediaCard clock stopped */
-#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE    (1 << 11) /* Write operation, indicates transfer finished */
-#define H3800_ASIC1_MMC_STATUS_END_PROGRAM           (1 << 12) /* End write and read operations */
-#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE  (1 << 13) /* End command response */
-
-#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE           (1 << 0)  /* Enables SPI mode */
-#define H3800_ASIC1_MMC_SPI_REG_CRC_ON               (1 << 1)  /* 1:turn on CRC    */
-#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE        (1 << 2)  /* 1:turn on SPI CS */
-#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK      0x38      /* Bits 3,4,5 are the SPI CS relative address */
-
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE  0x00
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1           0x01
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2           0x02
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3           0x03
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE         (1 << 2)  /* This command contains a data transfer */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE               (1 << 3)  /* This data transfer is a write */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE         (1 << 4)  /* This data transfer is in stream mode */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT            (1 << 5)  /* Busy signal expected after current cmd */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE          (1 << 6)  /* Enables the 80 bits for initializing card */
-
-#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE       (1 << 0)
-#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE             (1 << 1)
-#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE     (1 << 2)
-#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY             (1 << 3)
-
-#define H3800_ASIC1_MMC_BUFFER_PART_FULL                  (1 << 0)
-
-/********* GPIO **********/
-
-#define _H3800_ASIC1_GPIO_Base        0x1e00
-
-#define _H3800_ASIC1_GPIO_Mask          0x30    /* R/W 0:don't mask, 1:mask interrupt */
-#define _H3800_ASIC1_GPIO_Direction     0x32    /* R/W 0:input, 1:output              */
-#define _H3800_ASIC1_GPIO_Out           0x34    /* R/W 0:output low, 1:output high    */
-#define _H3800_ASIC1_GPIO_TriggerType   0x36    /* R/W 0:level, 1:edge                */
-#define _H3800_ASIC1_GPIO_EdgeTrigger   0x38    /* R/W 0:falling, 1:rising            */
-#define _H3800_ASIC1_GPIO_LevelTrigger  0x3A    /* R/W 0:low, 1:high level detect     */
-#define _H3800_ASIC1_GPIO_LevelStatus   0x3C    /* R/W 0:none, 1:detect               */
-#define _H3800_ASIC1_GPIO_EdgeStatus    0x3E    /* R/W 0:none, 1:detect               */
-#define _H3800_ASIC1_GPIO_State         0x40    /* R   See masks below  (default 0)         */
-#define _H3800_ASIC1_GPIO_Reset         0x42    /* R/W See masks below  (default 0x04)      */
-#define _H3800_ASIC1_GPIO_SleepMask     0x44    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
-#define _H3800_ASIC1_GPIO_SleepDir      0x46    /* R/W direction 0:input, 1:output in sleep mode    */
-#define _H3800_ASIC1_GPIO_SleepOut      0x48    /* R/W level 0:low, 1:high in sleep mode           */
-#define _H3800_ASIC1_GPIO_Status        0x4A    /* R   Pin status                                  */
-#define _H3800_ASIC1_GPIO_BattFaultDir  0x4C    /* R/W direction 0:input, 1:output in batt_fault   */
-#define _H3800_ASIC1_GPIO_BattFaultOut  0x4E    /* R/W level 0:low, 1:high in batt_fault           */
-
-#define H3800_ASIC1_GPIO_Mask         H3800_ASIC1_OFFSET( u16, GPIO, Mask )
-#define H3800_ASIC1_GPIO_Direction    H3800_ASIC1_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC1_GPIO_Out          H3800_ASIC1_OFFSET( u16, GPIO, Out )
-#define H3800_ASIC1_GPIO_TriggerType  H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
-#define H3800_ASIC1_GPIO_EdgeTrigger  H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
-#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
-#define H3800_ASIC1_GPIO_LevelStatus  H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
-#define H3800_ASIC1_GPIO_EdgeStatus   H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
-#define H3800_ASIC1_GPIO_State        H3800_ASIC1_OFFSET(  u8, GPIO, State )
-#define H3800_ASIC1_GPIO_Reset        H3800_ASIC1_OFFSET(  u8, GPIO, Reset )
-#define H3800_ASIC1_GPIO_SleepMask    H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
-#define H3800_ASIC1_GPIO_SleepDir     H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
-#define H3800_ASIC1_GPIO_SleepOut     H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
-#define H3800_ASIC1_GPIO_Status       H3800_ASIC1_OFFSET( u16, GPIO, Status )
-#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
-#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
-
-#define H3800_ASIC1_GPIO_STATE_MASK            (1 << 0)
-#define H3800_ASIC1_GPIO_STATE_DIRECTION       (1 << 1)
-#define H3800_ASIC1_GPIO_STATE_OUT             (1 << 2)
-#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE    (1 << 3)
-#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER    (1 << 4)
-#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER   (1 << 5)
-
-#define H3800_ASIC1_GPIO_RESET_SOFTWARE        (1 << 0)
-#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP      (1 << 1)
-#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON    (1 << 2)
-
-/* These are all outputs */
-#define GPIO_H3800_ASIC1_IR_ON_N          (1 << 0)   /* Apply power to the IR Module */
-#define GPIO_H3800_ASIC1_SD_PWR_ON        (1 << 1)   /* Secure Digital power on */
-#define GPIO_H3800_ASIC1_RS232_ON         (1 << 2)   /* Turn on power to the RS232 chip ? */
-#define GPIO_H3800_ASIC1_PULSE_GEN        (1 << 3)   /* Goes to speaker / earphone */
-#define GPIO_H3800_ASIC1_CH_TIMER         (1 << 4)   /* */
-#define GPIO_H3800_ASIC1_LCD_5V_ON        (1 << 5)   /* Enables LCD_5V */
-#define GPIO_H3800_ASIC1_LCD_ON           (1 << 6)   /* Enables LCD_3V */
-#define GPIO_H3800_ASIC1_LCD_PCI          (1 << 7)   /* Connects to PDWN on LCD controller */
-#define GPIO_H3800_ASIC1_VGH_ON           (1 << 8)   /* Drives VGH on the LCD (+9??) */
-#define GPIO_H3800_ASIC1_VGL_ON           (1 << 9)   /* Drivers VGL on the LCD (-6??) */
-#define GPIO_H3800_ASIC1_FL_PWR_ON        (1 << 10)  /* Frontlight power on */
-#define GPIO_H3800_ASIC1_BT_PWR_ON        (1 << 11)  /* Bluetooth power on */
-#define GPIO_H3800_ASIC1_SPK_ON           (1 << 12)  /* */
-#define GPIO_H3800_ASIC1_EAR_ON_N         (1 << 13)  /* */
-#define GPIO_H3800_ASIC1_AUD_PWR_ON       (1 << 14)  /* */
-
-/* Write enable for the flash */
-
-#define _H3800_ASIC1_FlashWP_Base         0x1F00
-#define _H3800_ASIC1_FlashWP_VPP_ON         0x00    /* R   1: write, 0: protect */
-#define H3800_ASIC1_FlashWP_VPP_ON       H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
 
 #endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 0cb36609b3a..ae81f80b0cf 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -153,8 +153,6 @@
  */
 #ifdef CONFIG_SA1111
 #define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #else
@@ -175,23 +173,3 @@
 #define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
 #define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
 
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
-#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT    9
-
-#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT    5
-- 
cgit v1.2.3


From d92c60f802f3af56d15f14f7cb83e630586c87f9 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Fri, 20 Feb 2009 10:18:08 +0100
Subject: [ARM] 5408/1: SA1100: update defconfigs after h3800 removal

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/assabet_defconfig    | 1 -
 arch/arm/configs/badge4_defconfig     | 1 -
 arch/arm/configs/cerfcube_defconfig   | 1 -
 arch/arm/configs/collie_defconfig     | 1 -
 arch/arm/configs/h3600_defconfig      | 1 -
 arch/arm/configs/hackkit_defconfig    | 1 -
 arch/arm/configs/jornada720_defconfig | 1 -
 arch/arm/configs/lart_defconfig       | 1 -
 arch/arm/configs/neponset_defconfig   | 1 -
 arch/arm/configs/pleb_defconfig       | 1 -
 arch/arm/configs/shannon_defconfig    | 1 -
 arch/arm/configs/simpad_defconfig     | 1 -
 12 files changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index b1cd331aaec..c66dd399e42 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -89,7 +89,6 @@ CONFIG_SA1100_ASSABET=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 80222feb7da..f264846218a 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 CONFIG_SA1100_BADGE4=y
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index ee130b528bd..2b4c0668b1b 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -93,7 +93,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index f7622e65816..1aa62249031 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -113,7 +113,6 @@ CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_COLLIE=y
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 8f986e9f1c6..f2e16fd0a6b 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
 CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 1c8fb89a673..db0708d5cbe 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -91,7 +91,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 81fadafae02..f3074e49f2f 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -178,7 +178,6 @@ CONFIG_DMABOUNCE=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index a1cc34f2560..56ae56899d2 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index d81ea219c93..36cd62edd05 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -91,7 +91,6 @@ CONFIG_ASSABET_NEPONSET=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index a6b47ea8e46..f2d2dda2594 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -88,7 +88,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index d052c8f8051..984f7096a53 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -87,7 +87,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 03f783e696b..685d2b51320 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -89,7 +89,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 # CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
-- 
cgit v1.2.3


From 423145a5d4def58cff760809d48cfb21316d59a9 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Mon, 16 Feb 2009 20:39:19 +0100
Subject: [ARM] 5399/1: [AT91] Configure MCLK and SSC for AT91SAMG20-EK

The AT91SAM20-EK has a WM8731 attached to it with MCLK supplied from
PCLK0 and the digital audio interface supplied by SSC0.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9g20ek.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 81439fe6fb3..438efbb1748 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -238,6 +238,10 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* PCK0 provides MCLK to the WM8731 */
+	at91_set_B_periph(AT91_PIN_PC1, 0);
+	/* SSC (for WM8731) */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 }
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
-- 
cgit v1.2.3


From 308d333ad6cc12e39adaed22dc10bac48e17742a Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 21 Feb 2009 21:36:22 +0000
Subject: [ARM] dma: move IOMD and floppy DMA structures to RiscPC DMA code

There's no point these being in a generic include file when they're
only used in arch/arm/mach-rpc/dma.c.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/dma.h | 13 -------------
 arch/arm/mach-rpc/dma.c         | 13 +++++++++++++
 2 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 5166145d8a3..9e614a18e68 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -43,19 +43,6 @@ struct dma_struct {
 	const struct dma_ops *d_ops;
 };
 
-struct floppy_dma {
-	struct dma_struct	dma;
-	unsigned int		fiq;
-};
-
-struct iomd_dma {
-	struct dma_struct	dma;
-	unsigned int		state;
-	unsigned long		base;		/* Controller base address */
-	int			irq;		/* Controller IRQ */
-	struct scatterlist	cur_sg;		/* Current controller buffer */
-};
-
 /*
  * isa_dma_add - add an ISA-style DMA channel
  */
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index a5987bbed60..1f77cdca26e 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -26,6 +26,14 @@
 #include <asm/mach/dma.h>
 #include <asm/hardware/iomd.h>
 
+struct iomd_dma {
+	struct dma_struct	dma;
+	unsigned int		state;
+	unsigned long		base;		/* Controller base address */
+	int			irq;		/* Controller IRQ */
+	struct scatterlist	cur_sg;		/* Current controller buffer */
+};
+
 #if 0
 typedef enum {
 	dma_size_8	= 1,
@@ -242,6 +250,11 @@ static struct fiq_handler fh = {
 	.name	= "floppydma"
 };
 
+struct floppy_dma {
+	struct dma_struct	dma;
+	unsigned int		fiq;
+};
+
 static void floppy_enable_dma(unsigned int chan, dma_t *dma)
 {
 	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
-- 
cgit v1.2.3


From fa4e998999322bc1b11d2c8b19b9fa2016fd1548 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 21 Feb 2009 21:38:56 +0000
Subject: [ARM] dma: RiscPC: don't modify DMA SG entries

We should not be modifying the scatterlist passed to us from the
driver code; doing so breaks assumptions made by the DMA API code,
and could cause problems if the driver retries a transfer using an
old scatterlist.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-rpc/dma.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 1f77cdca26e..c47d974d52b 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -32,6 +32,8 @@ struct iomd_dma {
 	unsigned long		base;		/* Controller base address */
 	int			irq;		/* Controller IRQ */
 	struct scatterlist	cur_sg;		/* Current controller buffer */
+	dma_addr_t		dma_addr;
+	unsigned int		dma_len;
 };
 
 #if 0
@@ -57,10 +59,10 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 	unsigned long end, offset, flags = 0;
 
 	if (idma->dma.sg) {
-		sg->dma_address = idma->dma.sg->dma_address;
+		sg->dma_address = idma->dma_addr;
 		offset = sg->dma_address & ~PAGE_MASK;
 
-		end = offset + idma->dma.sg->length;
+		end = offset + idma->dma_len;
 
 		if (end > PAGE_SIZE)
 			end = PAGE_SIZE;
@@ -70,12 +72,14 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 
 		sg->length = end - TRANSFER_SIZE;
 
-		idma->dma.sg->length -= end - offset;
-		idma->dma.sg->dma_address += end - offset;
+		idma->dma_len -= end - offset;
+		idma->dma_addr += end - offset;
 
-		if (idma->dma.sg->length == 0) {
+		if (idma->dma_len == 0) {
 			if (idma->dma.sgcount > 1) {
 				idma->dma.sg = sg_next(idma->dma.sg);
+				idma->dma_addr = idma->dma.sg->dma_address;
+				idma->dma_len = idma->dma.sg->length;
 				idma->dma.sgcount--;
 			} else {
 				idma->dma.sg = NULL;
-- 
cgit v1.2.3


From fc6fcdfbb8f1b2553255170f221cd57a4108591f Mon Sep 17 00:00:00 2001
From: Hannes Eder <hannes@hanneseder.net>
Date: Sun, 22 Feb 2009 01:00:57 +0100
Subject: x86: kexec/i386: fix sparse warnings: Using plain integer as NULL
 pointer

Fix these sparse warnings:

  arch/x86/kernel/machine_kexec_32.c:124:22: warning: Using plain integer as NULL pointer
  arch/x86/kernel/traps.c:950:24: warning: Using plain integer as NULL pointer

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/machine_kexec_32.c | 2 +-
 arch/x86/kernel/traps.c            | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 37f420018a4..f5fc8c781a6 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -121,7 +121,7 @@ static void machine_kexec_page_table_set_one(
 static void machine_kexec_prepare_page_tables(struct kimage *image)
 {
 	void *control_page;
-	pmd_t *pmd = 0;
+	pmd_t *pmd = NULL;
 
 	control_page = page_address(image->control_code_page);
 #ifdef CONFIG_X86_PAE
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index acb8c0585ab..2df927b5003 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -942,7 +942,7 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
 	info.si_signo = SIGILL;
 	info.si_errno = 0;
 	info.si_code = ILL_BADSTK;
-	info.si_addr = 0;
+	info.si_addr = NULL;
 	if (notify_die(DIE_TRAP, "iret exception",
 			regs, error_code, 32, SIGILL) == NOTIFY_STOP)
 		return;
-- 
cgit v1.2.3


From 2366c298b5afe52e635afd5604b69ce9fd4471fc Mon Sep 17 00:00:00 2001
From: Hannes Eder <hannes@hanneseder.net>
Date: Sun, 22 Feb 2009 01:01:13 +0100
Subject: x86: numa_32.c: fix sparse warning: Using plain integer as NULL
 pointer

Fix this sparse warning:

  arch/x86/mm/numa_32.c:197:24: warning: Using plain integer as NULL pointer

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/numa_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index d1f7439d173..3957cd6d645 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -194,7 +194,7 @@ void *alloc_remap(int nid, unsigned long size)
 	size = ALIGN(size, L1_CACHE_BYTES);
 
 	if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
-		return 0;
+		return NULL;
 
 	node_remap_alloc_vaddr[nid] += size;
 	memset(allocation, 0, size);
-- 
cgit v1.2.3


From b319eed0aa0a6d710887350a3cb734c572aa64c4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 22 Feb 2009 10:24:18 +0100
Subject: x86, mm: fault.c, simplify kmmio_fault(), cleanup

Clarify the kmmio_fault() comment.

Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9bb07d331c3..a03b7279efa 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -57,7 +57,8 @@ enum x86_pf_error_code {
 };
 
 /*
- * (returns 0 if mmiotrace is disabled)
+ * Returns 0 if mmiotrace is disabled, or if the fault is not
+ * handled by mmiotrace:
  */
 static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
 {
-- 
cgit v1.2.3


From a47e3ec197f515e25c77805f02d26f9e86456f65 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 20 Feb 2009 18:57:58 -0800
Subject: x86: ia32_signal: remove unused debug code

Impact: cleanup

DEBUG_SIG will not be used.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/ia32/ia32_signal.c | 18 ------------------
 1 file changed, 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index dd77ac0cac4..adc63f81cb8 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -33,8 +33,6 @@
 #include <asm/sigframe.h>
 #include <asm/sys_ia32.h>
 
-#define DEBUG_SIG 0
-
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
 #define FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
@@ -220,12 +218,6 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-#if DEBUG_SIG
-	printk(KERN_DEBUG "SIG restore_sigcontext: "
-	       "sc=%p err(%x) eip(%x) cs(%x) flg(%x)\n",
-	       sc, sc->err, sc->ip, sc->cs, sc->flags);
-#endif
-
 	get_user_try {
 		/*
 		 * Reload fs and gs if they have changed in the signal
@@ -488,11 +480,6 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	regs->cs = __USER32_CS;
 	regs->ss = __USER32_DS;
 
-#if DEBUG_SIG
-	printk(KERN_DEBUG "SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
-	       current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
-
 	return 0;
 }
 
@@ -574,10 +561,5 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->cs = __USER32_CS;
 	regs->ss = __USER32_DS;
 
-#if DEBUG_SIG
-	printk(KERN_DEBUG "SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n",
-	       current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
-
 	return 0;
 }
-- 
cgit v1.2.3


From 8801ead40caa8ba9c7d47a06ff1247c166cbfd5a Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 20 Feb 2009 19:00:13 -0800
Subject: x86: ia32_signal: introduce GET_SEG() macro

Impact: cleanup

introduce GET_SEG() macro like arch/x86/kernel/signal.c.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/ia32/ia32_signal.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index adc63f81cb8..8dd0903da08 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -192,11 +192,15 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 	get_user_ex(regs->x, &sc->x);		\
 }
 
-#define COPY_SEG_CPL3(seg)	{			\
-		unsigned short tmp;			\
-		get_user_ex(tmp, &sc->seg);		\
-		regs->seg = tmp | 3;			\
-}
+#define GET_SEG(seg)		({			\
+	unsigned short tmp;				\
+	get_user_ex(tmp, &sc->seg);			\
+	tmp;						\
+})
+
+#define COPY_SEG_CPL3(seg)	do {			\
+	regs->seg = GET_SEG(seg) | 3;			\
+} while (0)
 
 #define RELOAD_SEG(seg)		{		\
 	unsigned int cur, pre;			\
-- 
cgit v1.2.3


From a967bb3fbe640056bacb0357722f51676bb06e3c Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 20 Feb 2009 19:00:54 -0800
Subject: x86: ia32_signal: introduce {get|set}_user_seg()

Impact: cleanup

Introduce {get|set}_user_seg() and loadsegment_xx() macros to make code clean.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/ia32/ia32_signal.c | 38 ++++++++++++++++++--------------------
 1 file changed, 18 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 8dd0903da08..588a7aa937e 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -188,6 +188,14 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 /*
  * Do a signal return; undo the signal stack.
  */
+#define loadsegment_gs(v)	load_gs_index(v)
+#define loadsegment_fs(v)	loadsegment(fs, v)
+#define loadsegment_ds(v)	loadsegment(ds, v)
+#define loadsegment_es(v)	loadsegment(es, v)
+
+#define get_user_seg(seg)	({ unsigned int v; savesegment(seg, v); v; })
+#define set_user_seg(seg, v)	loadsegment_##seg(v)
+
 #define COPY(x)			{		\
 	get_user_ex(regs->x, &sc->x);		\
 }
@@ -203,19 +211,18 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr,
 } while (0)
 
 #define RELOAD_SEG(seg)		{		\
-	unsigned int cur, pre;			\
-	get_user_ex(pre, &sc->seg);		\
-	savesegment(seg, cur);			\
+	unsigned int pre = GET_SEG(seg);	\
+	unsigned int cur = get_user_seg(seg);	\
 	pre |= 3;				\
 	if (pre != cur)				\
-		loadsegment(seg, pre);		\
+		set_user_seg(seg, pre);		\
 }
 
 static int ia32_restore_sigcontext(struct pt_regs *regs,
 				   struct sigcontext_ia32 __user *sc,
 				   unsigned int *pax)
 {
-	unsigned int tmpflags, gs, oldgs, err = 0;
+	unsigned int tmpflags, err = 0;
 	void __user *buf;
 	u32 tmp;
 
@@ -229,12 +236,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 		 * the handler, but does not clobber them at least in the
 		 * normal case.
 		 */
-		get_user_ex(gs, &sc->gs);
-		gs |= 3;
-		savesegment(gs, oldgs);
-		if (gs != oldgs)
-			load_gs_index(gs);
-
+		RELOAD_SEG(gs);
 		RELOAD_SEG(fs);
 		RELOAD_SEG(ds);
 		RELOAD_SEG(es);
@@ -333,17 +335,13 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
 				 void __user *fpstate,
 				 struct pt_regs *regs, unsigned int mask)
 {
-	int tmp, err = 0;
+	int err = 0;
 
 	put_user_try {
-		savesegment(gs, tmp);
-		put_user_ex(tmp, (unsigned int __user *)&sc->gs);
-		savesegment(fs, tmp);
-		put_user_ex(tmp, (unsigned int __user *)&sc->fs);
-		savesegment(ds, tmp);
-		put_user_ex(tmp, (unsigned int __user *)&sc->ds);
-		savesegment(es, tmp);
-		put_user_ex(tmp, (unsigned int __user *)&sc->es);
+		put_user_ex(get_user_seg(gs), (unsigned int __user *)&sc->gs);
+		put_user_ex(get_user_seg(fs), (unsigned int __user *)&sc->fs);
+		put_user_ex(get_user_seg(ds), (unsigned int __user *)&sc->ds);
+		put_user_ex(get_user_seg(es), (unsigned int __user *)&sc->es);
 
 		put_user_ex(regs->di, &sc->di);
 		put_user_ex(regs->si, &sc->si);
-- 
cgit v1.2.3


From b98103a5597b87211a1c74077b06faeac554bedc Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Sat, 21 Feb 2009 00:09:47 +0100
Subject: x86: hpet: print HPET registers during setup (if hpet=verbose is
 used)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Mark Hounschell <markh@compro.net>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/hpet.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index a00545fe5cd..1d86ca3c1f9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -80,6 +80,7 @@ static inline void hpet_clear_mapping(void)
  */
 static int boot_hpet_disable;
 int hpet_force_user;
+static int hpet_verbose;
 
 static int __init hpet_setup(char *str)
 {
@@ -88,6 +89,8 @@ static int __init hpet_setup(char *str)
 			boot_hpet_disable = 1;
 		if (!strncmp("force", str, 5))
 			hpet_force_user = 1;
+		if (!strncmp("verbose", str, 7))
+			hpet_verbose = 1;
 	}
 	return 1;
 }
@@ -119,6 +122,43 @@ int is_hpet_enabled(void)
 }
 EXPORT_SYMBOL_GPL(is_hpet_enabled);
 
+static void _hpet_print_config(const char *function, int line)
+{
+	u32 i, timers, l, h;
+	printk(KERN_INFO "hpet: %s(%d):\n", function, line);
+	l = hpet_readl(HPET_ID);
+	h = hpet_readl(HPET_PERIOD);
+	timers = ((l & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
+	printk(KERN_INFO "hpet: ID: 0x%x, PERIOD: 0x%x\n", l, h);
+	l = hpet_readl(HPET_CFG);
+	h = hpet_readl(HPET_STATUS);
+	printk(KERN_INFO "hpet: CFG: 0x%x, STATUS: 0x%x\n", l, h);
+	l = hpet_readl(HPET_COUNTER);
+	h = hpet_readl(HPET_COUNTER+4);
+	printk(KERN_INFO "hpet: COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h);
+
+	for (i = 0; i < timers; i++) {
+		l = hpet_readl(HPET_Tn_CFG(i));
+		h = hpet_readl(HPET_Tn_CFG(i)+4);
+		printk(KERN_INFO "hpet: T%d: CFG_l: 0x%x, CFG_h: 0x%x\n",
+		       i, l, h);
+		l = hpet_readl(HPET_Tn_CMP(i));
+		h = hpet_readl(HPET_Tn_CMP(i)+4);
+		printk(KERN_INFO "hpet: T%d: CMP_l: 0x%x, CMP_h: 0x%x\n",
+		       i, l, h);
+		l = hpet_readl(HPET_Tn_ROUTE(i));
+		h = hpet_readl(HPET_Tn_ROUTE(i)+4);
+		printk(KERN_INFO "hpet: T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n",
+		       i, l, h);
+	}
+}
+
+#define hpet_print_config()					\
+do {								\
+	if (hpet_verbose)					\
+		_hpet_print_config(__FUNCTION__, __LINE__);	\
+} while (0)
+
 /*
  * When the hpet driver (/dev/hpet) is enabled, we need to reserve
  * timer 0 and timer 1 in case of RTC emulation.
@@ -282,6 +322,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
 		hpet_writel(cmp, HPET_Tn_CMP(timer));
 		udelay(1);
 		hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
+		hpet_print_config();
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -308,6 +349,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
 			irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
 			enable_irq(hdev->irq);
 		}
+		hpet_print_config();
 		break;
 	}
 }
@@ -526,6 +568,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
 
 	num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
 	num_timers++; /* Value read out starts from 0 */
+	hpet_print_config();
 
 	hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
 	if (!hpet_devs)
@@ -793,6 +836,7 @@ int __init hpet_enable(void)
 	 * information and the number of channels
 	 */
 	id = hpet_readl(HPET_ID);
+	hpet_print_config();
 
 #ifdef CONFIG_HPET_EMULATE_RTC
 	/*
@@ -845,6 +889,7 @@ static __init int hpet_late_init(void)
 		return -ENODEV;
 
 	hpet_reserve_platform_timers(hpet_readl(HPET_ID));
+	hpet_print_config();
 
 	for_each_online_cpu(cpu) {
 		hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
-- 
cgit v1.2.3


From 8d6f0c8214928f7c5083dd54ecb69c5d615b516e Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Sat, 21 Feb 2009 00:10:44 +0100
Subject: x86: hpet: provide separate functions to stop and start the counter

By splitting up existing hpet_start_counter function.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Mark Hounschell <markh@compro.net>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/hpet.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 1d86ca3c1f9..7ae1f1e8b9b 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -231,27 +231,37 @@ static struct clock_event_device hpet_clockevent = {
 	.rating		= 50,
 };
 
-static void hpet_start_counter(void)
+static void hpet_stop_counter(void)
 {
 	unsigned long cfg = hpet_readl(HPET_CFG);
-
 	cfg &= ~HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);
 	hpet_writel(0, HPET_COUNTER);
 	hpet_writel(0, HPET_COUNTER + 4);
+}
+
+static void hpet_start_counter(void)
+{
+	unsigned long cfg = hpet_readl(HPET_CFG);
 	cfg |= HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);
 }
 
+static void hpet_restart_counter(void)
+{
+	hpet_stop_counter();
+	hpet_start_counter();
+}
+
 static void hpet_resume_device(void)
 {
 	force_hpet_resume();
 }
 
-static void hpet_restart_counter(void)
+static void hpet_resume_counter(void)
 {
 	hpet_resume_device();
-	hpet_start_counter();
+	hpet_restart_counter();
 }
 
 static void hpet_enable_legacy_int(void)
@@ -738,7 +748,7 @@ static struct clocksource clocksource_hpet = {
 	.mask		= HPET_MASK,
 	.shift		= HPET_SHIFT,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-	.resume		= hpet_restart_counter,
+	.resume		= hpet_resume_counter,
 #ifdef CONFIG_X86_64
 	.vread		= vread_hpet,
 #endif
@@ -750,7 +760,7 @@ static int hpet_clocksource_register(void)
 	cycle_t t1;
 
 	/* Start the counter */
-	hpet_start_counter();
+	hpet_restart_counter();
 
 	/* Verify whether hpet counter works */
 	t1 = read_hpet();
-- 
cgit v1.2.3


From c23e253e67c9d8a91a0ffa33c1f571a17f0a2403 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Sat, 21 Feb 2009 00:16:35 +0100
Subject: x86: hpet: stop HPET_COUNTER when programming periodic mode

Impact: fix system hang on some systems operating with HZ_1000

On a system that stalled with HZ_1000, the first value written to
T0_CMP (when the main counter was not stopped) did not trigger an
interrupt. Instead after the main counter wrapped around (after
several minutes) an interrupt was triggered and afterwards the
periodic interrupt took effect.

This can be fixed by implementing HPET spec recommendation for
programming the periodic mode (i.e. stopping the main counter).

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Mark Hounschell <markh@compro.net>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/hpet.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 7ae1f1e8b9b..648b3a2a3a4 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -309,29 +309,22 @@ static int hpet_setup_msi_irq(unsigned int irq);
 static void hpet_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt, int timer)
 {
-	unsigned long cfg, cmp, now;
+	unsigned long cfg;
 	uint64_t delta;
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
+		hpet_stop_counter();
 		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
 		delta >>= evt->shift;
-		now = hpet_readl(HPET_COUNTER);
-		cmp = now + (unsigned long) delta;
 		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		/* Make sure we use edge triggered interrupts */
 		cfg &= ~HPET_TN_LEVEL;
 		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 		       HPET_TN_SETVAL | HPET_TN_32BIT;
 		hpet_writel(cfg, HPET_Tn_CFG(timer));
-		/*
-		 * The first write after writing TN_SETVAL to the
-		 * config register sets the counter value, the second
-		 * write sets the period.
-		 */
-		hpet_writel(cmp, HPET_Tn_CMP(timer));
-		udelay(1);
 		hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
+		hpet_start_counter();
 		hpet_print_config();
 		break;
 
-- 
cgit v1.2.3


From ef1f87aa7ba6224bef1b750b3272ba281d8f43ed Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Sat, 21 Feb 2009 14:23:21 -0800
Subject: x86: select x2apic ops in early apic probe only if x2apic mode is
 enabled

If BIOS hands over the control to OS in legacy xapic mode, select
legacy xapic related ops in the early apic probe and shift to x2apic
ops later in the boot sequence, only after enabling x2apic mode.

If BIOS hands over the control in x2apic mode, select x2apic related
ops in the early apic probe.

This fixes the early boot panic, where we were selecting x2apic ops,
while the cpu is still in legacy xapic mode.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h           |  2 +-
 arch/x86/kernel/apic/apic.c           |  9 +--------
 arch/x86/kernel/apic/probe_64.c       | 13 ++++++++++---
 arch/x86/kernel/apic/x2apic_cluster.c |  5 +----
 arch/x86/kernel/apic/x2apic_phys.c    | 10 +++++-----
 5 files changed, 18 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index dce1bf696cc..a6208dc7463 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -146,7 +146,7 @@ static inline u64 native_x2apic_icr_read(void)
 	return val;
 }
 
-extern int x2apic;
+extern int x2apic, x2apic_phys;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
 extern void enable_IR_x2apic(void);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c12823eb55b..47c2d12e5cf 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1265,14 +1265,7 @@ void __cpuinit end_local_APIC_setup(void)
 #ifdef CONFIG_X86_X2APIC
 void check_x2apic(void)
 {
-	int msr, msr2;
-
-	if (!cpu_has_x2apic)
-		return;
-
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
-
-	if (msr & X2APIC_ENABLE) {
+	if (x2apic_enabled()) {
 		pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
 		x2apic_preenabled = x2apic = 1;
 	}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 70935dd904d..e7c163661c7 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,9 +50,16 @@ static struct apic *apic_probe[] __initdata = {
 void __init default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_X2APIC
-	if (apic == &apic_x2apic_phys || apic == &apic_x2apic_cluster) {
-		if (!intr_remapping_enabled)
-			apic = &apic_flat;
+	if (x2apic && (apic != &apic_x2apic_phys &&
+#ifdef CONFIG_X86_UV
+		       apic != &apic_x2apic_uv_x &&
+#endif
+		       apic != &apic_x2apic_cluster)) {
+		if (x2apic_phys)
+			apic = &apic_x2apic_phys;
+		else
+			apic = &apic_x2apic_cluster;
+		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 #endif
 
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 4e39d9ad4d5..354b9c45601 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -14,10 +14,7 @@ DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	if (cpu_has_x2apic)
-		return 1;
-
-	return 0;
+	return x2apic_enabled();
 }
 
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index d2d52eb9f7e..5bcb174409b 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -10,7 +10,7 @@
 #include <asm/apic.h>
 #include <asm/ipi.h>
 
-static int x2apic_phys;
+int x2apic_phys;
 
 static int set_x2apic_phys_mode(char *arg)
 {
@@ -21,10 +21,10 @@ early_param("x2apic_phys", set_x2apic_phys_mode);
 
 static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	if (cpu_has_x2apic && x2apic_phys)
-		return 1;
-
-	return 0;
+	if (x2apic_phys)
+		return x2apic_enabled();
+	else
+		return 0;
 }
 
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-- 
cgit v1.2.3


From 8425091ff8af2addae118fc510a523b84ce51115 Mon Sep 17 00:00:00 2001
From: Ravikiran G Thirumalai <kiran@scalex86.org>
Date: Fri, 20 Feb 2009 16:59:11 -0800
Subject: x86: improve the help text of X86_EXTENDED_PLATFORM

Change the CONFIG_X86_EXTENDED_PLATFORM help text to display the
32bit/64bit extended platform list. This is as suggested by Ingo.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: shai@scalex86.org
Cc: "Benzi Galili (Benzi@ScaleMP.com)" <benzi@scalemp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8955262caa3..35efba546e0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -285,6 +285,7 @@ config X86_BIGSMP
 	---help---
 	  This option is needed for the systems that have more than 8 CPUs
 
+if X86_32
 config X86_EXTENDED_PLATFORM
 	bool "Support for extended (non-PC) x86 platforms"
 	default y
@@ -293,12 +294,37 @@ config X86_EXTENDED_PLATFORM
 	  standard PC platforms. (which covers the vast majority of
 	  systems out there.)
 
-	  If you enable this option then you'll be able to select a number
-	  of non-PC x86 platforms.
+	  If you enable this option then you'll be able to select support
+	  for the following (non-PC) 32 bit x86 platforms:
+		AMD Elan
+		NUMAQ (IBM/Sequent)
+		RDC R-321x SoC
+		SGI 320/540 (Visual Workstation)
+		Summit/EXA (IBM x440)
+		Unisys ES7000 IA32 series
+		Voyager (NCR)
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
+endif
+
+if X86_64
+config X86_EXTENDED_PLATFORM
+	bool "Support for extended (non-PC) x86 platforms"
+	default y
+	---help---
+	  If you disable this option then the kernel will only support
+	  standard PC platforms. (which covers the vast majority of
+	  systems out there.)
+
+	  If you enable this option then you'll be able to select support
+	  for the following (non-PC) 64 bit x86 platforms:
+		ScaleMP vSMP
+		SGI Ultraviolet
 
+	  If you have one of these systems, or if you want to build a
+	  generic distribution kernel, say Y here - otherwise say N.
+endif
 # This is an alphabetically sorted list of 64 bit extended platforms
 # Please maintain the alphabetic order if and when there are additions
 
-- 
cgit v1.2.3


From 965c7ecaf2e2b083d711a01ab33735a4bdeee1a4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 22 Feb 2009 23:19:12 +0100
Subject: x86: remove the Voyager 32-bit subarch

Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                               |   14 -
 arch/x86/boot/Makefile                         |    1 -
 arch/x86/boot/a20.c                            |    6 -
 arch/x86/boot/boot.h                           |    3 -
 arch/x86/boot/main.c                           |    5 -
 arch/x86/boot/voyager.c                        |   40 -
 arch/x86/configs/i386_defconfig                |    1 -
 arch/x86/configs/x86_64_defconfig              |    1 -
 arch/x86/include/asm/mach-voyager/do_timer.h   |   17 -
 arch/x86/include/asm/mach-voyager/entry_arch.h |   26 -
 arch/x86/include/asm/mach-voyager/setup_arch.h |   12 -
 arch/x86/include/asm/vic.h                     |   61 -
 arch/x86/include/asm/voyager.h                 |  571 --------
 arch/x86/lguest/Kconfig                        |    1 -
 arch/x86/mach-voyager/Makefile                 |    8 -
 arch/x86/mach-voyager/setup.c                  |  119 --
 arch/x86/mach-voyager/voyager_basic.c          |  317 -----
 arch/x86/mach-voyager/voyager_cat.c            | 1197 ----------------
 arch/x86/mach-voyager/voyager_smp.c            | 1805 ------------------------
 arch/x86/mach-voyager/voyager_thread.c         |  128 --
 arch/x86/xen/Kconfig                           |    2 +-
 21 files changed, 1 insertion(+), 4334 deletions(-)
 delete mode 100644 arch/x86/boot/voyager.c
 delete mode 100644 arch/x86/include/asm/mach-voyager/do_timer.h
 delete mode 100644 arch/x86/include/asm/mach-voyager/entry_arch.h
 delete mode 100644 arch/x86/include/asm/mach-voyager/setup_arch.h
 delete mode 100644 arch/x86/include/asm/vic.h
 delete mode 100644 arch/x86/include/asm/voyager.h
 delete mode 100644 arch/x86/mach-voyager/Makefile
 delete mode 100644 arch/x86/mach-voyager/setup.c
 delete mode 100644 arch/x86/mach-voyager/voyager_basic.c
 delete mode 100644 arch/x86/mach-voyager/voyager_cat.c
 delete mode 100644 arch/x86/mach-voyager/voyager_smp.c
 delete mode 100644 arch/x86/mach-voyager/voyager_thread.c

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 35efba546e0..5e2919c0ff9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -302,7 +302,6 @@ config X86_EXTENDED_PLATFORM
 		SGI 320/540 (Visual Workstation)
 		Summit/EXA (IBM x440)
 		Unisys ES7000 IA32 series
-		Voyager (NCR)
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
@@ -423,19 +422,6 @@ config X86_ES7000
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 
-config X86_VOYAGER
-	bool "Voyager (NCR)"
-	depends on SMP && !PCI && BROKEN
-	depends on X86_32_NON_STANDARD
-	---help---
-	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
-	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
-
-	  *** WARNING ***
-
-	  If you do not specifically know you have a Voyager based machine,
-	  say N here, otherwise the kernel you build will not be bootable.
-
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index cd48c721001..c70eff69a1f 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -32,7 +32,6 @@ setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
 setup-y		+= printf.o string.o tty.o video.o video-mode.o version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
-setup-$(CONFIG_X86_VOYAGER) += voyager.o
 
 # The link order of the video-*.o modules can matter.  In particular,
 # video-vga.o *must* be listed first, followed by video-vesa.o.
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index fba8e9c6a50..7c19ce8c244 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -126,11 +126,6 @@ static void enable_a20_fast(void)
 
 int enable_a20(void)
 {
-#ifdef CONFIG_X86_VOYAGER
-	/* On Voyager, a20_test() is unsafe? */
-	enable_a20_kbc();
-	return 0;
-#else
        int loops = A20_ENABLE_LOOPS;
        int kbc_err;
 
@@ -164,5 +159,4 @@ int enable_a20(void)
        }
        
        return -1;
-#endif
 }
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index cc0ef13fba7..7b2692e897e 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -302,9 +302,6 @@ void probe_cards(int unsafe);
 /* video-vesa.c */
 void vesa_store_edid(void);
 
-/* voyager.c */
-int query_voyager(void);
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* BOOT_BOOT_H */
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 197421db1af..58f0415d3ae 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -149,11 +149,6 @@ void main(void)
 	/* Query MCA information */
 	query_mca();
 
-	/* Voyager */
-#ifdef CONFIG_X86_VOYAGER
-	query_voyager();
-#endif
-
 	/* Query Intel SpeedStep (IST) information */
 	query_ist();
 
diff --git a/arch/x86/boot/voyager.c b/arch/x86/boot/voyager.c
deleted file mode 100644
index 433909d61e5..00000000000
--- a/arch/x86/boot/voyager.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * Get the Voyager config information
- */
-
-#include "boot.h"
-
-int query_voyager(void)
-{
-	u8 err;
-	u16 es, di;
-	/* Abuse the apm_bios_info area for this */
-	u8 *data_ptr = (u8 *)&boot_params.apm_bios_info;
-
-	data_ptr[0] = 0xff;	/* Flag on config not found(?) */
-
-	asm("pushw %%es ; "
-	    "int $0x15 ; "
-	    "setc %0 ; "
-	    "movw %%es, %1 ; "
-	    "popw %%es"
-	    : "=q" (err), "=r" (es), "=D" (di)
-	    : "a" (0xffc0));
-
-	if (err)
-		return -1;	/* Not Voyager */
-
-	set_fs(es);
-	copy_from_fs(data_ptr, di, 7);	/* Table is 7 bytes apparently */
-	return 0;
-}
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 096dd5359cd..5c023f6f652 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -197,7 +197,6 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 # CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 2efb5d5063f..4157cc4a2bd 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -199,7 +199,6 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
 # CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
 # CONFIG_X86_GENERICARCH is not set
 # CONFIG_X86_VSMP is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
diff --git a/arch/x86/include/asm/mach-voyager/do_timer.h b/arch/x86/include/asm/mach-voyager/do_timer.h
deleted file mode 100644
index 9e5a459fd15..00000000000
--- a/arch/x86/include/asm/mach-voyager/do_timer.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/voyager.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-static inline void do_timer_interrupt_hook(void)
-{
-	global_clock_event->event_handler(global_clock_event);
-	voyager_timer_interrupt();
-}
-
diff --git a/arch/x86/include/asm/mach-voyager/entry_arch.h b/arch/x86/include/asm/mach-voyager/entry_arch.h
deleted file mode 100644
index ae52624b593..00000000000
--- a/arch/x86/include/asm/mach-voyager/entry_arch.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/entry_arch.h
- *
- * This file builds the VIC and QIC CPI gates
- */
-
-/* initialise the voyager interrupt gates 
- *
- * This uses the macros in irq.h to set up assembly jump gates.  The
- * calls are then redirected to the same routine with smp_ prefixed */
-BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
-BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
-BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
-
-/* do all the QIC interrupts */
-BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
-BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
-BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
-BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
-BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
-BUILD_INTERRUPT(qic_call_function_single_interrupt, QIC_CALL_FUNCTION_SINGLE_CPI);
diff --git a/arch/x86/include/asm/mach-voyager/setup_arch.h b/arch/x86/include/asm/mach-voyager/setup_arch.h
deleted file mode 100644
index 71729ca05cd..00000000000
--- a/arch/x86/include/asm/mach-voyager/setup_arch.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <asm/voyager.h>
-#include <asm/setup.h>
-#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
-			(&boot_params.apm_bios_info))
-
-/* Hook to call BIOS initialisation function */
-
-/* for voyager, pass the voyager BIOS/SUS info area to the detection
- * routines */
-
-#define ARCH_SETUP	voyager_detect(VOYAGER_BIOS_INFO);
-
diff --git a/arch/x86/include/asm/vic.h b/arch/x86/include/asm/vic.h
deleted file mode 100644
index 53100f35361..00000000000
--- a/arch/x86/include/asm/vic.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager Interrupt Controller */
-
-/* The eight CPI vectors.  To activate a CPI, you write a bit mask
- * corresponding to the processor set to be interrupted into the
- * relevant register.  That set of CPUs will then be interrupted with
- * the CPI */
-static const int VIC_CPI_Registers[] =
-	{0xFC00, 0xFC01, 0xFC08, 0xFC09,
-	 0xFC10, 0xFC11, 0xFC18, 0xFC19 };
-
-#define VIC_PROC_WHO_AM_I		0xfc29
-#	define	QUAD_IDENTIFIER		0xC0
-#	define  EIGHT_SLOT_IDENTIFIER	0xE0
-#define QIC_EXTENDED_PROCESSOR_SELECT	0xFC72
-#define VIC_CPI_BASE_REGISTER		0xFC41
-#define VIC_PROCESSOR_ID		0xFC21
-#	define VIC_CPU_MASQUERADE_ENABLE 0x8
-
-#define VIC_CLAIM_REGISTER_0		0xFC38
-#define VIC_CLAIM_REGISTER_1		0xFC39
-#define VIC_REDIRECT_REGISTER_0		0xFC60
-#define VIC_REDIRECT_REGISTER_1		0xFC61
-#define VIC_PRIORITY_REGISTER		0xFC20
-
-#define VIC_PRIMARY_MC_BASE		0xFC48
-#define VIC_SECONDARY_MC_BASE		0xFC49
-
-#define QIC_PROCESSOR_ID		0xFC71
-#	define	QIC_CPUID_ENABLE	0x08
-
-#define QIC_VIC_CPI_BASE_REGISTER	0xFC79
-#define QIC_CPI_BASE_REGISTER		0xFC7A
-
-#define QIC_MASK_REGISTER0		0xFC80
-/* NOTE: these are masked high, enabled low */
-#	define QIC_PERF_TIMER		0x01
-#	define QIC_LPE			0x02
-#	define QIC_SYS_INT		0x04
-#	define QIC_CMN_INT		0x08
-/* at the moment, just enable CMN_INT, disable SYS_INT */
-#	define QIC_DEFAULT_MASK0	(~(QIC_CMN_INT /* | VIC_SYS_INT */))
-#define QIC_MASK_REGISTER1		0xFC81
-#	define QIC_BOOT_CPI_MASK	0xFE
-/* Enable CPI's 1-6 inclusive */
-#	define QIC_CPI_ENABLE		0x81
-
-#define QIC_INTERRUPT_CLEAR0		0xFC8A
-#define QIC_INTERRUPT_CLEAR1		0xFC8B
-
-/* this is where we place the CPI vectors */
-#define VIC_DEFAULT_CPI_BASE		0xC0
-/* this is where we place the QIC CPI vectors */
-#define QIC_DEFAULT_CPI_BASE		0xD0
-
-#define VIC_BOOT_INTERRUPT_MASK		0xfe
-
-extern void smp_vic_timer_interrupt(void);
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
deleted file mode 100644
index c1635d43616..00000000000
--- a/arch/x86/include/asm/voyager.h
+++ /dev/null
@@ -1,571 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager system */
-
-#undef	VOYAGER_DEBUG
-#undef	VOYAGER_CAT_DEBUG
-
-#ifdef VOYAGER_DEBUG
-#define VDEBUG(x)	printk x
-#else
-#define VDEBUG(x)
-#endif
-
-/* There are three levels of voyager machine: 3,4 and 5. The rule is
- * if it's less than 3435 it's a Level 3 except for a 3360 which is
- * a level 4.  A 3435 or above is a Level 5 */
-#define VOYAGER_LEVEL5_AND_ABOVE	0x3435
-#define VOYAGER_LEVEL4			0x3360
-
-/* The L4 DINO ASIC */
-#define VOYAGER_DINO			0x43
-
-/* voyager ports in standard I/O space */
-#define VOYAGER_MC_SETUP	0x96
-
-
-#define	VOYAGER_CAT_CONFIG_PORT			0x97
-#	define VOYAGER_CAT_DESELECT		0xff
-#define VOYAGER_SSPB_RELOCATION_PORT		0x98
-
-/* Valid CAT controller commands */
-/* start instruction register cycle */
-#define VOYAGER_CAT_IRCYC			0x01
-/* start data register cycle */
-#define VOYAGER_CAT_DRCYC			0x02
-/* move to execute state */
-#define VOYAGER_CAT_RUN				0x0F
-/* end operation */
-#define VOYAGER_CAT_END				0x80
-/* hold in idle state */
-#define VOYAGER_CAT_HOLD			0x90
-/* single step an "intest" vector */
-#define VOYAGER_CAT_STEP			0xE0
-/* return cat controller to CLEMSON mode */
-#define VOYAGER_CAT_CLEMSON			0xFF
-
-/* the default cat command header */
-#define VOYAGER_CAT_HEADER			0x7F
-
-/* the range of possible CAT module ids in the system */
-#define VOYAGER_MIN_MODULE			0x10
-#define VOYAGER_MAX_MODULE			0x1f
-
-/* The voyager registers per asic */
-#define VOYAGER_ASIC_ID_REG			0x00
-#define VOYAGER_ASIC_TYPE_REG			0x01
-/* the sub address registers can be made auto incrementing on reads */
-#define VOYAGER_AUTO_INC_REG			0x02
-#	define VOYAGER_AUTO_INC			0x04
-#	define VOYAGER_NO_AUTO_INC		0xfb
-#define VOYAGER_SUBADDRDATA			0x03
-#define VOYAGER_SCANPATH			0x05
-#	define VOYAGER_CONNECT_ASIC		0x01
-#	define VOYAGER_DISCONNECT_ASIC		0xfe
-#define VOYAGER_SUBADDRLO			0x06
-#define VOYAGER_SUBADDRHI			0x07
-#define VOYAGER_SUBMODSELECT			0x08
-#define VOYAGER_SUBMODPRESENT			0x09
-
-#define VOYAGER_SUBADDR_LO			0xff
-#define VOYAGER_SUBADDR_HI			0xffff
-
-/* the maximum size of a scan path -- used to form instructions */
-#define VOYAGER_MAX_SCAN_PATH			0x100
-/* the biggest possible register size (in bytes) */
-#define VOYAGER_MAX_REG_SIZE			4
-
-/* Total number of possible modules (including submodules) */
-#define VOYAGER_MAX_MODULES			16
-/* Largest number of asics per module */
-#define VOYAGER_MAX_ASICS_PER_MODULE		7
-
-/* the CAT asic of each module is always the first one */
-#define VOYAGER_CAT_ID				0
-#define VOYAGER_PSI				0x1a
-
-/* voyager instruction operations and registers */
-#define VOYAGER_READ_CONFIG			0x1
-#define VOYAGER_WRITE_CONFIG			0x2
-#define VOYAGER_BYPASS				0xff
-
-typedef struct voyager_asic {
-	__u8	asic_addr;	/* ASIC address; Level 4 */
-	__u8	asic_type;      /* ASIC type */
-	__u8	asic_id;	/* ASIC id */
-	__u8	jtag_id[4];	/* JTAG id */
-	__u8	asic_location;	/* Location within scan path; start w/ 0 */
-	__u8	bit_location;	/* Location within bit stream; start w/ 0 */
-	__u8	ireg_length;	/* Instruction register length */
-	__u16	subaddr;	/* Amount of sub address space */
-	struct voyager_asic *next;	/* Next asic in linked list */
-} voyager_asic_t;
-
-typedef struct voyager_module {
-	__u8	module_addr;		/* Module address */
-	__u8	scan_path_connected;	/* Scan path connected */
-	__u16   ee_size;		/* Size of the EEPROM */
-	__u16   num_asics;		/* Number of Asics */
-	__u16   inst_bits;		/* Instruction bits in the scan path */
-	__u16   largest_reg;		/* Largest register in the scan path */
-	__u16   smallest_reg;		/* Smallest register in the scan path */
-	voyager_asic_t   *asic;		/* First ASIC in scan path (CAT_I) */
-	struct   voyager_module *submodule;	/* Submodule pointer */
-	struct   voyager_module *next;		/* Next module in linked list */
-} voyager_module_t;
-
-typedef struct voyager_eeprom_hdr {
-	 __u8  module_id[4];
-	 __u8  version_id;
-	 __u8  config_id;
-	 __u16 boundry_id;	/* boundary scan id */
-	 __u16 ee_size;		/* size of EEPROM */
-	 __u8  assembly[11];	/* assembly # */
-	 __u8  assembly_rev;	/* assembly rev */
-	 __u8  tracer[4];	/* tracer number */
-	 __u16 assembly_cksum;	/* asm checksum */
-	 __u16 power_consump;	/* pwr requirements */
-	 __u16 num_asics;	/* number of asics */
-	 __u16 bist_time;	/* min. bist time */
-	 __u16 err_log_offset;	/* error log offset */
-	 __u16 scan_path_offset;/* scan path offset */
-	 __u16 cct_offset;
-	 __u16 log_length;	/* length of err log */
-	 __u16 xsum_end;	/* offset to end of
-				   checksum */
-	 __u8  reserved[4];
-	 __u8  sflag;		/* starting sentinal */
-	 __u8  part_number[13];	/* prom part number */
-	 __u8  version[10];	/* version number */
-	 __u8  signature[8];
-	 __u16 eeprom_chksum;
-	 __u32  data_stamp_offset;
-	 __u8  eflag ;		 /* ending sentinal */
-} __attribute__((packed)) voyager_eprom_hdr_t;
-
-
-
-#define VOYAGER_EPROM_SIZE_OFFSET				\
-	((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
-#define VOYAGER_XSUM_END_OFFSET		0x2a
-
-/* the following three definitions are for internal table layouts
- * in the module EPROMs.  We really only care about the IDs and
- * offsets */
-typedef struct voyager_sp_table {
-	__u8 asic_id;
-	__u8 bypass_flag;
-	__u16 asic_data_offset;
-	__u16 config_data_offset;
-} __attribute__((packed)) voyager_sp_table_t;
-
-typedef struct voyager_jtag_table {
-	__u8 icode[4];
-	__u8 runbist[4];
-	__u8 intest[4];
-	__u8 samp_preld[4];
-	__u8 ireg_len;
-} __attribute__((packed)) voyager_jtt_t;
-
-typedef struct voyager_asic_data_table {
-	__u8 jtag_id[4];
-	__u16 length_bsr;
-	__u16 length_bist_reg;
-	__u32 bist_clk;
-	__u16 subaddr_bits;
-	__u16 seed_bits;
-	__u16 sig_bits;
-	__u16 jtag_offset;
-} __attribute__((packed)) voyager_at_t;
-
-/* Voyager Interrupt Controller (VIC) registers */
-
-/* Base to add to Cross Processor Interrupts (CPIs) when triggering
- * the CPU IRQ line */
-/* register defines for the WCBICs (one per processor) */
-#define VOYAGER_WCBIC0	0x41		/* bus A node P1 processor 0 */
-#define VOYAGER_WCBIC1	0x49		/* bus A node P1 processor 1 */
-#define VOYAGER_WCBIC2	0x51		/* bus A node P2 processor 0 */
-#define VOYAGER_WCBIC3	0x59		/* bus A node P2 processor 1 */
-#define VOYAGER_WCBIC4	0x61		/* bus B node P1 processor 0 */
-#define VOYAGER_WCBIC5	0x69		/* bus B node P1 processor 1 */
-#define VOYAGER_WCBIC6	0x71		/* bus B node P2 processor 0 */
-#define VOYAGER_WCBIC7	0x79		/* bus B node P2 processor 1 */
-
-
-/* top of memory registers */
-#define VOYAGER_WCBIC_TOM_L	0x4
-#define VOYAGER_WCBIC_TOM_H	0x5
-
-/* register defines for Voyager Memory Contol (VMC)
- * these are present on L4 machines only */
-#define	VOYAGER_VMC1		0x81
-#define VOYAGER_VMC2		0x91
-#define VOYAGER_VMC3		0xa1
-#define VOYAGER_VMC4		0xb1
-
-/* VMC Ports */
-#define VOYAGER_VMC_MEMORY_SETUP	0x9
-#	define VMC_Interleaving		0x01
-#	define VMC_4Way			0x02
-#	define VMC_EvenCacheLines	0x04
-#	define VMC_HighLine		0x08
-#	define VMC_Start0_Enable	0x20
-#	define VMC_Start1_Enable	0x40
-#	define VMC_Vremap		0x80
-#define VOYAGER_VMC_BANK_DENSITY	0xa
-#	define	VMC_BANK_EMPTY		0
-#	define	VMC_BANK_4MB		1
-#	define	VMC_BANK_16MB		2
-#	define	VMC_BANK_64MB		3
-#	define	VMC_BANK0_MASK		0x03
-#	define	VMC_BANK1_MASK		0x0C
-#	define	VMC_BANK2_MASK		0x30
-#	define	VMC_BANK3_MASK		0xC0
-
-/* Magellan Memory Controller (MMC) defines - present on L5 */
-#define VOYAGER_MMC_ASIC_ID		1
-/* the two memory modules corresponding to memory cards in the system */
-#define VOYAGER_MMC_MEMORY0_MODULE	0x14
-#define VOYAGER_MMC_MEMORY1_MODULE	0x15
-/* the Magellan Memory Address (MMA) defines */
-#define VOYAGER_MMA_ASIC_ID		2
-
-/* Submodule number for the Quad Baseboard */
-#define VOYAGER_QUAD_BASEBOARD		1
-
-/* ASIC defines for the Quad Baseboard */
-#define VOYAGER_QUAD_QDATA0		1
-#define VOYAGER_QUAD_QDATA1		2
-#define VOYAGER_QUAD_QABC		3
-
-/* Useful areas in extended CMOS */
-#define VOYAGER_PROCESSOR_PRESENT_MASK	0x88a
-#define VOYAGER_MEMORY_CLICKMAP		0xa23
-#define VOYAGER_DUMP_LOCATION		0xb1a
-
-/* SUS In Control bit - used to tell SUS that we don't need to be
- * babysat anymore */
-#define VOYAGER_SUS_IN_CONTROL_PORT	0x3ff
-#	define VOYAGER_IN_CONTROL_FLAG	0x80
-
-/* Voyager PSI defines */
-#define VOYAGER_PSI_STATUS_REG		0x08
-#	define PSI_DC_FAIL		0x01
-#	define PSI_MON			0x02
-#	define PSI_FAULT		0x04
-#	define PSI_ALARM		0x08
-#	define PSI_CURRENT		0x10
-#	define PSI_DVM			0x20
-#	define PSI_PSCFAULT		0x40
-#	define PSI_STAT_CHG		0x80
-
-#define VOYAGER_PSI_SUPPLY_REG		0x8000
-	/* read */
-#	define PSI_FAIL_DC		0x01
-#	define PSI_FAIL_AC		0x02
-#	define PSI_MON_INT		0x04
-#	define PSI_SWITCH_OFF		0x08
-#	define PSI_HX_OFF		0x10
-#	define PSI_SECURITY		0x20
-#	define PSI_CMOS_BATT_LOW	0x40
-#	define PSI_CMOS_BATT_FAIL	0x80
-	/* write */
-#	define PSI_CLR_SWITCH_OFF	0x13
-#	define PSI_CLR_HX_OFF		0x14
-#	define PSI_CLR_CMOS_BATT_FAIL	0x17
-
-#define VOYAGER_PSI_MASK		0x8001
-#	define PSI_MASK_MASK		0x10
-
-#define VOYAGER_PSI_AC_FAIL_REG		0x8004
-#define	AC_FAIL_STAT_CHANGE		0x80
-
-#define VOYAGER_PSI_GENERAL_REG		0x8007
-	/* read */
-#	define PSI_SWITCH_ON		0x01
-#	define PSI_SWITCH_ENABLED	0x02
-#	define PSI_ALARM_ENABLED	0x08
-#	define PSI_SECURE_ENABLED	0x10
-#	define PSI_COLD_RESET		0x20
-#	define PSI_COLD_START		0x80
-	/* write */
-#	define PSI_POWER_DOWN		0x10
-#	define PSI_SWITCH_DISABLE	0x01
-#	define PSI_SWITCH_ENABLE	0x11
-#	define PSI_CLEAR		0x12
-#	define PSI_ALARM_DISABLE	0x03
-#	define PSI_ALARM_ENABLE		0x13
-#	define PSI_CLEAR_COLD_RESET	0x05
-#	define PSI_SET_COLD_RESET	0x15
-#	define PSI_CLEAR_COLD_START	0x07
-#	define PSI_SET_COLD_START	0x17
-
-
-
-struct voyager_bios_info {
-	__u8	len;
-	__u8	major;
-	__u8	minor;
-	__u8	debug;
-	__u8	num_classes;
-	__u8	class_1;
-	__u8	class_2;
-};
-
-/* The following structures and definitions are for the Kernel/SUS
- * interface these are needed to find out how SUS initialised any Quad
- * boards in the system */
-
-#define	NUMBER_OF_MC_BUSSES	2
-#define SLOTS_PER_MC_BUS	8
-#define MAX_CPUS                16      /* 16 way CPU system */
-#define MAX_PROCESSOR_BOARDS	4	/* 4 processor slot system */
-#define MAX_CACHE_LEVELS	4	/* # of cache levels supported */
-#define MAX_SHARED_CPUS		4	/* # of CPUs that can share a LARC */
-#define NUMBER_OF_POS_REGS	8
-
-typedef struct {
-	__u8	MC_Slot;
-	__u8	POS_Values[NUMBER_OF_POS_REGS];
-} __attribute__((packed)) MC_SlotInformation_t;
-
-struct QuadDescription {
-	__u8  Type;	/* for type 0 (DYADIC or MONADIC) all fields
-			 * will be zero except for slot */
-	__u8 StructureVersion;
-	__u32 CPI_BaseAddress;
-	__u32  LARC_BankSize;
-	__u32 LocalMemoryStateBits;
-	__u8  Slot; /* Processor slots 1 - 4 */
-} __attribute__((packed));
-
-struct ProcBoardInfo {
-	__u8 Type;
-	__u8 StructureVersion;
-	__u8 NumberOfBoards;
-	struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS];
-} __attribute__((packed));
-
-struct CacheDescription {
-	__u8 Level;
-	__u32 TotalSize;
-	__u16 LineSize;
-	__u8  Associativity;
-	__u8  CacheType;
-	__u8  WriteType;
-	__u8  Number_CPUs_SharedBy;
-	__u8  Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS];
-
-} __attribute__((packed));
-
-struct CPU_Description {
-	__u8 CPU_HardwareId;
-	char *FRU_String;
-	__u8 NumberOfCacheLevels;
-	struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS];
-} __attribute__((packed));
-
-struct CPU_Info {
-	__u8 Type;
-	__u8 StructureVersion;
-	__u8 NumberOf_CPUs;
-	struct CPU_Description CPU_Data[MAX_CPUS];
-} __attribute__((packed));
-
-
-/*
- * This structure will be used by SUS and the OS.
- * The assumption about this structure is that no blank space is
- * packed in it by our friend the compiler.
- */
-typedef struct {
-	__u8	Mailbox_SUS;		/* Written to by SUS to give
-					   commands/response to the OS */
-	__u8	Mailbox_OS;		/* Written to by the OS to give
-					   commands/response to SUS */
-	__u8	SUS_MailboxVersion;	/* Tells the OS which iteration of the
-					   interface SUS supports */
-	__u8	OS_MailboxVersion;	/* Tells SUS which iteration of the
-					   interface the OS supports */
-	__u32	OS_Flags;		/* Flags set by the OS as info for
-					   SUS */
-	__u32	SUS_Flags;		/* Flags set by SUS as info
-					   for the OS */
-	__u32	WatchDogPeriod;		/* Watchdog period (in seconds) which
-					   the DP uses to see if the OS
-					   is dead */
-	__u32	WatchDogCount;		/* Updated by the OS on every tic. */
-	__u32	MemoryFor_SUS_ErrorLog;	/* Flat 32 bit address which tells SUS
-					   where to stuff the SUS error log
-					   on a dump */
-	MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS];
-					/* Storage for MCA POS data */
-	/* All new SECOND_PASS_INTERFACE fields added from this point */
-	struct ProcBoardInfo    *BoardData;
-	struct CPU_Info         *CPU_Data;
-	/* All new fields must be added from this point */
-} Voyager_KernelSUS_Mbox_t;
-
-/* structure for finding the right memory address to send a QIC CPI to */
-struct voyager_qic_cpi {
-	/* Each cache line (32 bytes) can trigger a cpi.  The cpi
-	 * read/write may occur anywhere in the cache line---pick the
-	 * middle to be safe */
-	struct  {
-		__u32 pad1[3];
-		__u32 cpi;
-		__u32 pad2[4];
-	} qic_cpi[8];
-};
-
-struct voyager_status {
-	__u32	power_fail:1;
-	__u32	switch_off:1;
-	__u32	request_from_kernel:1;
-};
-
-struct voyager_psi_regs {
-	__u8 cat_id;
-	__u8 cat_dev;
-	__u8 cat_control;
-	__u8 subaddr;
-	__u8 dummy4;
-	__u8 checkbit;
-	__u8 subaddr_low;
-	__u8 subaddr_high;
-	__u8 intstatus;
-	__u8 stat1;
-	__u8 stat3;
-	__u8 fault;
-	__u8 tms;
-	__u8 gen;
-	__u8 sysconf;
-	__u8 dummy15;
-};
-
-struct voyager_psi_subregs {
-	__u8 supply;
-	__u8 mask;
-	__u8 present;
-	__u8 DCfail;
-	__u8 ACfail;
-	__u8 fail;
-	__u8 UPSfail;
-	__u8 genstatus;
-};
-
-struct voyager_psi {
-	struct voyager_psi_regs regs;
-	struct voyager_psi_subregs subregs;
-};
-
-struct voyager_SUS {
-#define	VOYAGER_DUMP_BUTTON_NMI		0x1
-#define VOYAGER_SUS_VALID		0x2
-#define VOYAGER_SYSINT_COMPLETE		0x3
-	__u8	SUS_mbox;
-#define VOYAGER_NO_COMMAND		0x0
-#define VOYAGER_IGNORE_DUMP		0x1
-#define VOYAGER_DO_DUMP			0x2
-#define VOYAGER_SYSINT_HANDSHAKE	0x3
-#define VOYAGER_DO_MEM_DUMP		0x4
-#define VOYAGER_SYSINT_WAS_RECOVERED	0x5
-	__u8	kernel_mbox;
-#define	VOYAGER_MAILBOX_VERSION		0x10
-	__u8	SUS_version;
-	__u8	kernel_version;
-#define VOYAGER_OS_HAS_SYSINT		0x1
-#define VOYAGER_OS_IN_PROGRESS		0x2
-#define VOYAGER_UPDATING_WDPERIOD	0x4
-	__u32	kernel_flags;
-#define VOYAGER_SUS_BOOTING		0x1
-#define VOYAGER_SUS_IN_PROGRESS		0x2
-	__u32	SUS_flags;
-	__u32	watchdog_period;
-	__u32	watchdog_count;
-	__u32	SUS_errorlog;
-	/* lots of system configuration stuff under here */
-};
-
-/* Variables exported by voyager_smp */
-extern __u32 voyager_extended_vic_processors;
-extern __u32 voyager_allowed_boot_processors;
-extern __u32 voyager_quad_processors;
-extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS];
-extern struct voyager_SUS *voyager_SUS;
-
-/* variables exported always */
-extern struct task_struct *voyager_thread;
-extern int voyager_level;
-extern struct voyager_status voyager_status;
-
-/* functions exported by the voyager and voyager_smp modules */
-extern int voyager_cat_readb(__u8 module, __u8 asic, int reg);
-extern void voyager_cat_init(void);
-extern void voyager_detect(struct voyager_bios_info *);
-extern void voyager_trap_init(void);
-extern void voyager_setup_irqs(void);
-extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length);
-extern void voyager_smp_intr_init(void);
-extern __u8 voyager_extended_cmos_read(__u16 cmos_address);
-extern void voyager_smp_dump(void);
-extern void voyager_timer_interrupt(void);
-extern void smp_local_timer_interrupt(void);
-extern void voyager_power_off(void);
-extern void smp_voyager_power_off(void *dummy);
-extern void voyager_restart(void);
-extern void voyager_cat_power_off(void);
-extern void voyager_cat_do_common_interrupt(void);
-extern void voyager_handle_nmi(void);
-extern void voyager_smp_intr_init(void);
-/* Commands for the following are */
-#define	VOYAGER_PSI_READ	0
-#define VOYAGER_PSI_WRITE	1
-#define VOYAGER_PSI_SUBREAD	2
-#define VOYAGER_PSI_SUBWRITE	3
-extern void voyager_cat_psi(__u8, __u16, __u8 *);
-
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0			0
-#define VIC_CPI_LEVEL1			1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI			2
-#define VIC_INVALIDATE_CPI		3
-#define VIC_RESCHEDULE_CPI		4
-#define VIC_ENABLE_IRQ_CPI		5
-#define VIC_CALL_FUNCTION_CPI		6
-#define VIC_CALL_FUNCTION_SINGLE_CPI	7
-
-/* Now the QIC CPIs:  Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET			1
-#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT			8
-#define VIC_CMN_INT			15
-
-/* This is the boot CPI for alternate processors.  It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
-
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index c70e12b1a63..8dab8f7844d 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -3,7 +3,6 @@ config LGUEST_GUEST
 	select PARAVIRT
 	depends on X86_32
 	depends on !X86_PAE
-	depends on !X86_VOYAGER
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE
diff --git a/arch/x86/mach-voyager/Makefile b/arch/x86/mach-voyager/Makefile
deleted file mode 100644
index 15c250b371d..00000000000
--- a/arch/x86/mach-voyager/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-EXTRA_CFLAGS	:= -Iarch/x86/kernel
-obj-y			:= setup.o voyager_basic.o voyager_thread.o
-
-obj-$(CONFIG_SMP)	+= voyager_smp.o voyager_cat.o
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
deleted file mode 100644
index 88c3c555634..00000000000
--- a/arch/x86/mach-voyager/setup.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *	Machine specific setup for generic
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/arch_hooks.h>
-#include <asm/voyager.h>
-#include <asm/e820.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/cpu.h>
-
-void __init pre_intr_init_hook(void)
-{
-	init_ISA_irqs();
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "cascade",
-};
-
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_SMP
-	voyager_smp_intr_init();
-#endif
-
-	setup_irq(2, &irq2);
-}
-
-static void voyager_disable_tsc(void)
-{
-	/* Voyagers run their CPUs from independent clocks, so disable
-	 * the TSC code because we can't sync them */
-	setup_clear_cpu_cap(X86_FEATURE_TSC);
-}
-
-void __init pre_setup_arch_hook(void)
-{
-	voyager_disable_tsc();
-}
-
-void __init pre_time_init_hook(void)
-{
-	voyager_disable_tsc();
-}
-
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0 = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
-	.mask = CPU_MASK_NONE,
-	.name = "timer"
-};
-
-void __init time_init_hook(void)
-{
-	irq0.mask = cpumask_of_cpu(safe_smp_processor_id());
-	setup_irq(0, &irq0);
-}
-
-/* Hook for machine specific memory setup. */
-
-char *__init machine_specific_memory_setup(void)
-{
-	char *who;
-	int new_nr;
-
-	who = "NOT VOYAGER";
-
-	if (voyager_level == 5) {
-		__u32 addr, length;
-		int i;
-
-		who = "Voyager-SUS";
-
-		e820.nr_map = 0;
-		for (i = 0; voyager_memory_detect(i, &addr, &length); i++) {
-			e820_add_region(addr, length, E820_RAM);
-		}
-		return who;
-	} else if (voyager_level == 4) {
-		__u32 tom;
-		__u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT) << 8;
-		/* select the DINO config space */
-		outb(VOYAGER_DINO, VOYAGER_CAT_CONFIG_PORT);
-		/* Read DINO top of memory register */
-		tom = ((inb(catbase + 0x4) & 0xf0) << 16)
-		    + ((inb(catbase + 0x5) & 0x7f) << 24);
-
-		if (inb(catbase) != VOYAGER_DINO) {
-			printk(KERN_ERR
-			       "Voyager: Failed to get DINO for L4, setting tom to EXT_MEM_K\n");
-			tom = (boot_params.screen_info.ext_mem_k) << 10;
-		}
-		who = "Voyager-TOM";
-		e820_add_region(0, 0x9f000, E820_RAM);
-		/* map from 1M to top of memory */
-		e820_add_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024,
-				  E820_RAM);
-		/* FIXME: Should check the ASICs to see if I need to
-		 * take out the 8M window.  Just do it at the moment
-		 * */
-		e820_add_region(8 * 1024 * 1024, 8 * 1024 * 1024,
-				  E820_RESERVED);
-		return who;
-	}
-
-	return default_machine_specific_memory_setup();
-}
diff --git a/arch/x86/mach-voyager/voyager_basic.c b/arch/x86/mach-voyager/voyager_basic.c
deleted file mode 100644
index 46d6f806769..00000000000
--- a/arch/x86/mach-voyager/voyager_basic.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/* Copyright (C) 1999,2001 
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This file contains all the voyager specific routines for getting
- * initialisation of the architecture to function.  For additional
- * features see:
- *
- *	voyager_cat.c - Voyager CAT bus interface
- *	voyager_smp.c - Voyager SMP hal (emulates linux smp.c)
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/sysrq.h>
-#include <linux/smp.h>
-#include <linux/nodemask.h>
-#include <asm/io.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <linux/pm.h>
-#include <asm/tlbflush.h>
-#include <asm/arch_hooks.h>
-#include <asm/i8253.h>
-
-/*
- * Power off function, if any
- */
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
-
-int voyager_level = 0;
-
-struct voyager_SUS *voyager_SUS = NULL;
-
-#ifdef CONFIG_SMP
-static void voyager_dump(int dummy1, struct tty_struct *dummy3)
-{
-	/* get here via a sysrq */
-	voyager_smp_dump();
-}
-
-static struct sysrq_key_op sysrq_voyager_dump_op = {
-	.handler = voyager_dump,
-	.help_msg = "Voyager",
-	.action_msg = "Dump Voyager Status",
-};
-#endif
-
-void voyager_detect(struct voyager_bios_info *bios)
-{
-	if (bios->len != 0xff) {
-		int class = (bios->class_1 << 8)
-		    | (bios->class_2 & 0xff);
-
-		printk("Voyager System detected.\n"
-		       "        Class %x, Revision %d.%d\n",
-		       class, bios->major, bios->minor);
-		if (class == VOYAGER_LEVEL4)
-			voyager_level = 4;
-		else if (class < VOYAGER_LEVEL5_AND_ABOVE)
-			voyager_level = 3;
-		else
-			voyager_level = 5;
-		printk("        Architecture Level %d\n", voyager_level);
-		if (voyager_level < 4)
-			printk
-			    ("\n**WARNING**: Voyager HAL only supports Levels 4 and 5 Architectures at the moment\n\n");
-		/* install the power off handler */
-		pm_power_off = voyager_power_off;
-#ifdef CONFIG_SMP
-		register_sysrq_key('v', &sysrq_voyager_dump_op);
-#endif
-	} else {
-		printk("\n\n**WARNING**: No Voyager Subsystem Found\n");
-	}
-}
-
-void voyager_system_interrupt(int cpl, void *dev_id)
-{
-	printk("Voyager: detected system interrupt\n");
-}
-
-/* Routine to read information from the extended CMOS area */
-__u8 voyager_extended_cmos_read(__u16 addr)
-{
-	outb(addr & 0xff, 0x74);
-	outb((addr >> 8) & 0xff, 0x75);
-	return inb(0x76);
-}
-
-/* internal definitions for the SUS Click Map of memory */
-
-#define CLICK_ENTRIES	16
-#define CLICK_SIZE	4096	/* click to byte conversion for Length */
-
-typedef struct ClickMap {
-	struct Entry {
-		__u32 Address;
-		__u32 Length;
-	} Entry[CLICK_ENTRIES];
-} ClickMap_t;
-
-/* This routine is pretty much an awful hack to read the bios clickmap by
- * mapping it into page 0.  There are usually three regions in the map:
- * 	Base Memory
- * 	Extended Memory
- *	zero length marker for end of map
- *
- * Returns are 0 for failure and 1 for success on extracting region.
- */
-int __init voyager_memory_detect(int region, __u32 * start, __u32 * length)
-{
-	int i;
-	int retval = 0;
-	__u8 cmos[4];
-	ClickMap_t *map;
-	unsigned long map_addr;
-	unsigned long old;
-
-	if (region >= CLICK_ENTRIES) {
-		printk("Voyager: Illegal ClickMap region %d\n", region);
-		return 0;
-	}
-
-	for (i = 0; i < sizeof(cmos); i++)
-		cmos[i] =
-		    voyager_extended_cmos_read(VOYAGER_MEMORY_CLICKMAP + i);
-
-	map_addr = *(unsigned long *)cmos;
-
-	/* steal page 0 for this */
-	old = pg0[0];
-	pg0[0] = ((map_addr & PAGE_MASK) | _PAGE_RW | _PAGE_PRESENT);
-	local_flush_tlb();
-	/* now clear everything out but page 0 */
-	map = (ClickMap_t *) (map_addr & (~PAGE_MASK));
-
-	/* zero length is the end of the clickmap */
-	if (map->Entry[region].Length != 0) {
-		*length = map->Entry[region].Length * CLICK_SIZE;
-		*start = map->Entry[region].Address;
-		retval = 1;
-	}
-
-	/* replace the mapping */
-	pg0[0] = old;
-	local_flush_tlb();
-	return retval;
-}
-
-/* voyager specific handling code for timer interrupts.  Used to hand
- * off the timer tick to the SMP code, since the VIC doesn't have an
- * internal timer (The QIC does, but that's another story). */
-void voyager_timer_interrupt(void)
-{
-	if ((jiffies & 0x3ff) == 0) {
-
-		/* There seems to be something flaky in either
-		 * hardware or software that is resetting the timer 0
-		 * count to something much higher than it should be
-		 * This seems to occur in the boot sequence, just
-		 * before root is mounted.  Therefore, every 10
-		 * seconds or so, we sanity check the timer zero count
-		 * and kick it back to where it should be.
-		 *
-		 * FIXME: This is the most awful hack yet seen.  I
-		 * should work out exactly what is interfering with
-		 * the timer count settings early in the boot sequence
-		 * and swiftly introduce it to something sharp and
-		 * pointy.  */
-		__u16 val;
-
-		spin_lock(&i8253_lock);
-
-		outb_p(0x00, 0x43);
-		val = inb_p(0x40);
-		val |= inb(0x40) << 8;
-		spin_unlock(&i8253_lock);
-
-		if (val > LATCH) {
-			printk
-			    ("\nVOYAGER: countdown timer value too high (%d), resetting\n\n",
-			     val);
-			spin_lock(&i8253_lock);
-			outb(0x34, 0x43);
-			outb_p(LATCH & 0xff, 0x40);	/* LSB */
-			outb(LATCH >> 8, 0x40);	/* MSB */
-			spin_unlock(&i8253_lock);
-		}
-	}
-#ifdef CONFIG_SMP
-	smp_vic_timer_interrupt();
-#endif
-}
-
-void voyager_power_off(void)
-{
-	printk("VOYAGER Power Off\n");
-
-	if (voyager_level == 5) {
-		voyager_cat_power_off();
-	} else if (voyager_level == 4) {
-		/* This doesn't apparently work on most L4 machines,
-		 * but the specs say to do this to get automatic power
-		 * off.  Unfortunately, if it doesn't power off the
-		 * machine, it ends up doing a cold restart, which
-		 * isn't really intended, so comment out the code */
-#if 0
-		int port;
-
-		/* enable the voyager Configuration Space */
-		outb((inb(VOYAGER_MC_SETUP) & 0xf0) | 0x8, VOYAGER_MC_SETUP);
-		/* the port for the power off flag is an offset from the
-		   floating base */
-		port = (inb(VOYAGER_SSPB_RELOCATION_PORT) << 8) + 0x21;
-		/* set the power off flag */
-		outb(inb(port) | 0x1, port);
-#endif
-	}
-	/* and wait for it to happen */
-	local_irq_disable();
-	for (;;)
-		halt();
-}
-
-/* copied from process.c */
-static inline void kb_wait(void)
-{
-	int i;
-
-	for (i = 0; i < 0x10000; i++)
-		if ((inb_p(0x64) & 0x02) == 0)
-			break;
-}
-
-void machine_shutdown(void)
-{
-	/* Architecture specific shutdown needed before a kexec */
-}
-
-void machine_restart(char *cmd)
-{
-	printk("Voyager Warm Restart\n");
-	kb_wait();
-
-	if (voyager_level == 5) {
-		/* write magic values to the RTC to inform system that
-		 * shutdown is beginning */
-		outb(0x8f, 0x70);
-		outb(0x5, 0x71);
-
-		udelay(50);
-		outb(0xfe, 0x64);	/* pull reset low */
-	} else if (voyager_level == 4) {
-		__u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT) << 8;
-		__u8 basebd = inb(VOYAGER_MC_SETUP);
-
-		outb(basebd | 0x08, VOYAGER_MC_SETUP);
-		outb(0x02, catbase + 0x21);
-	}
-	local_irq_disable();
-	for (;;)
-		halt();
-}
-
-void machine_emergency_restart(void)
-{
-	/*for now, just hook this to a warm restart */
-	machine_restart(NULL);
-}
-
-void mca_nmi_hook(void)
-{
-	__u8 dumpval __maybe_unused = inb(0xf823);
-	__u8 swnmi __maybe_unused = inb(0xf813);
-
-	/* FIXME: assume dump switch pressed */
-	/* check to see if the dump switch was pressed */
-	VDEBUG(("VOYAGER: dumpval = 0x%x, swnmi = 0x%x\n", dumpval, swnmi));
-	/* clear swnmi */
-	outb(0xff, 0xf813);
-	/* tell SUS to ignore dump */
-	if (voyager_level == 5 && voyager_SUS != NULL) {
-		if (voyager_SUS->SUS_mbox == VOYAGER_DUMP_BUTTON_NMI) {
-			voyager_SUS->kernel_mbox = VOYAGER_NO_COMMAND;
-			voyager_SUS->kernel_flags |= VOYAGER_OS_IN_PROGRESS;
-			udelay(1000);
-			voyager_SUS->kernel_mbox = VOYAGER_IGNORE_DUMP;
-			voyager_SUS->kernel_flags &= ~VOYAGER_OS_IN_PROGRESS;
-		}
-	}
-	printk(KERN_ERR
-	       "VOYAGER: Dump switch pressed, printing CPU%d tracebacks\n",
-	       smp_processor_id());
-	show_stack(NULL, NULL);
-	show_state();
-}
-
-void machine_halt(void)
-{
-	/* treat a halt like a power off */
-	machine_power_off();
-}
-
-void machine_power_off(void)
-{
-	if (pm_power_off)
-		pm_power_off();
-}
diff --git a/arch/x86/mach-voyager/voyager_cat.c b/arch/x86/mach-voyager/voyager_cat.c
deleted file mode 100644
index 2ad598c104a..00000000000
--- a/arch/x86/mach-voyager/voyager_cat.c
+++ /dev/null
@@ -1,1197 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This file contains all the logic for manipulating the CAT bus
- * in a level 5 machine.
- *
- * The CAT bus is a serial configuration and test bus.  Its primary
- * uses are to probe the initial configuration of the system and to
- * diagnose error conditions when a system interrupt occurs.  The low
- * level interface is fairly primitive, so most of this file consists
- * of bit shift manipulations to send and receive packets on the
- * serial bus */
-
-#include <linux/types.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#ifdef VOYAGER_CAT_DEBUG
-#define CDEBUG(x)	printk x
-#else
-#define CDEBUG(x)
-#endif
-
-/* the CAT command port */
-#define CAT_CMD		(sspb + 0xe)
-/* the CAT data port */
-#define CAT_DATA	(sspb + 0xd)
-
-/* the internal cat functions */
-static void cat_pack(__u8 * msg, __u16 start_bit, __u8 * data, __u16 num_bits);
-static void cat_unpack(__u8 * msg, __u16 start_bit, __u8 * data,
-		       __u16 num_bits);
-static void cat_build_header(__u8 * header, const __u16 len,
-			     const __u16 smallest_reg_bits,
-			     const __u16 longest_reg_bits);
-static int cat_sendinst(voyager_module_t * modp, voyager_asic_t * asicp,
-			__u8 reg, __u8 op);
-static int cat_getdata(voyager_module_t * modp, voyager_asic_t * asicp,
-		       __u8 reg, __u8 * value);
-static int cat_shiftout(__u8 * data, __u16 data_bytes, __u16 header_bytes,
-			__u8 pad_bits);
-static int cat_write(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-		     __u8 value);
-static int cat_read(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-		    __u8 * value);
-static int cat_subread(voyager_module_t * modp, voyager_asic_t * asicp,
-		       __u16 offset, __u16 len, void *buf);
-static int cat_senddata(voyager_module_t * modp, voyager_asic_t * asicp,
-			__u8 reg, __u8 value);
-static int cat_disconnect(voyager_module_t * modp, voyager_asic_t * asicp);
-static int cat_connect(voyager_module_t * modp, voyager_asic_t * asicp);
-
-static inline const char *cat_module_name(int module_id)
-{
-	switch (module_id) {
-	case 0x10:
-		return "Processor Slot 0";
-	case 0x11:
-		return "Processor Slot 1";
-	case 0x12:
-		return "Processor Slot 2";
-	case 0x13:
-		return "Processor Slot 4";
-	case 0x14:
-		return "Memory Slot 0";
-	case 0x15:
-		return "Memory Slot 1";
-	case 0x18:
-		return "Primary Microchannel";
-	case 0x19:
-		return "Secondary Microchannel";
-	case 0x1a:
-		return "Power Supply Interface";
-	case 0x1c:
-		return "Processor Slot 5";
-	case 0x1d:
-		return "Processor Slot 6";
-	case 0x1e:
-		return "Processor Slot 7";
-	case 0x1f:
-		return "Processor Slot 8";
-	default:
-		return "Unknown Module";
-	}
-}
-
-static int sspb = 0;		/* stores the super port location */
-int voyager_8slot = 0;		/* set to true if a 51xx monster */
-
-voyager_module_t *voyager_cat_list;
-
-/* the I/O port assignments for the VIC and QIC */
-static struct resource vic_res = {
-	.name = "Voyager Interrupt Controller",
-	.start = 0xFC00,
-	.end = 0xFC6F
-};
-static struct resource qic_res = {
-	.name = "Quad Interrupt Controller",
-	.start = 0xFC70,
-	.end = 0xFCFF
-};
-
-/* This function is used to pack a data bit stream inside a message.
- * It writes num_bits of the data buffer in msg starting at start_bit.
- * Note: This function assumes that any unused bit in the data stream
- * is set to zero so that the ors will work correctly */
-static void
-cat_pack(__u8 * msg, const __u16 start_bit, __u8 * data, const __u16 num_bits)
-{
-	/* compute initial shift needed */
-	const __u16 offset = start_bit % BITS_PER_BYTE;
-	__u16 len = num_bits / BITS_PER_BYTE;
-	__u16 byte = start_bit / BITS_PER_BYTE;
-	__u16 residue = (num_bits % BITS_PER_BYTE) + offset;
-	int i;
-
-	/* adjust if we have more than a byte of residue */
-	if (residue >= BITS_PER_BYTE) {
-		residue -= BITS_PER_BYTE;
-		len++;
-	}
-
-	/* clear out the bits.  We assume here that if len==0 then
-	 * residue >= offset.  This is always true for the catbus
-	 * operations */
-	msg[byte] &= 0xff << (BITS_PER_BYTE - offset);
-	msg[byte++] |= data[0] >> offset;
-	if (len == 0)
-		return;
-	for (i = 1; i < len; i++)
-		msg[byte++] = (data[i - 1] << (BITS_PER_BYTE - offset))
-		    | (data[i] >> offset);
-	if (residue != 0) {
-		__u8 mask = 0xff >> residue;
-		__u8 last_byte = data[i - 1] << (BITS_PER_BYTE - offset)
-		    | (data[i] >> offset);
-
-		last_byte &= ~mask;
-		msg[byte] &= mask;
-		msg[byte] |= last_byte;
-	}
-	return;
-}
-
-/* unpack the data again (same arguments as cat_pack()). data buffer
- * must be zero populated.
- *
- * Function: given a message string move to start_bit and copy num_bits into
- * data (starting at bit 0 in data).
- */
-static void
-cat_unpack(__u8 * msg, const __u16 start_bit, __u8 * data, const __u16 num_bits)
-{
-	/* compute initial shift needed */
-	const __u16 offset = start_bit % BITS_PER_BYTE;
-	__u16 len = num_bits / BITS_PER_BYTE;
-	const __u8 last_bits = num_bits % BITS_PER_BYTE;
-	__u16 byte = start_bit / BITS_PER_BYTE;
-	int i;
-
-	if (last_bits != 0)
-		len++;
-
-	/* special case: want < 8 bits from msg and we can get it from
-	 * a single byte of the msg */
-	if (len == 0 && BITS_PER_BYTE - offset >= num_bits) {
-		data[0] = msg[byte] << offset;
-		data[0] &= 0xff >> (BITS_PER_BYTE - num_bits);
-		return;
-	}
-	for (i = 0; i < len; i++) {
-		/* this annoying if has to be done just in case a read of
-		 * msg one beyond the array causes a panic */
-		if (offset != 0) {
-			data[i] = msg[byte++] << offset;
-			data[i] |= msg[byte] >> (BITS_PER_BYTE - offset);
-		} else {
-			data[i] = msg[byte++];
-		}
-	}
-	/* do we need to truncate the final byte */
-	if (last_bits != 0) {
-		data[i - 1] &= 0xff << (BITS_PER_BYTE - last_bits);
-	}
-	return;
-}
-
-static void
-cat_build_header(__u8 * header, const __u16 len, const __u16 smallest_reg_bits,
-		 const __u16 longest_reg_bits)
-{
-	int i;
-	__u16 start_bit = (smallest_reg_bits - 1) % BITS_PER_BYTE;
-	__u8 *last_byte = &header[len - 1];
-
-	if (start_bit == 0)
-		start_bit = 1;	/* must have at least one bit in the hdr */
-
-	for (i = 0; i < len; i++)
-		header[i] = 0;
-
-	for (i = start_bit; i > 0; i--)
-		*last_byte = ((*last_byte) << 1) + 1;
-
-}
-
-static int
-cat_sendinst(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg, __u8 op)
-{
-	__u8 parity, inst, inst_buf[4] = { 0 };
-	__u8 iseq[VOYAGER_MAX_SCAN_PATH], hseq[VOYAGER_MAX_REG_SIZE];
-	__u16 ibytes, hbytes, padbits;
-	int i;
-
-	/* 
-	 * Parity is the parity of the register number + 1 (READ_REGISTER
-	 * and WRITE_REGISTER always add '1' to the number of bits == 1)
-	 */
-	parity = (__u8) (1 + (reg & 0x01) +
-			 ((__u8) (reg & 0x02) >> 1) +
-			 ((__u8) (reg & 0x04) >> 2) +
-			 ((__u8) (reg & 0x08) >> 3)) % 2;
-
-	inst = ((parity << 7) | (reg << 2) | op);
-
-	outb(VOYAGER_CAT_IRCYC, CAT_CMD);
-	if (!modp->scan_path_connected) {
-		if (asicp->asic_id != VOYAGER_CAT_ID) {
-			printk
-			    ("**WARNING***: cat_sendinst has disconnected scan path not to CAT asic\n");
-			return 1;
-		}
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		outb(inst, CAT_DATA);
-		if (inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
-			CDEBUG(("VOYAGER CAT: cat_sendinst failed to get CAT_HEADER\n"));
-			return 1;
-		}
-		return 0;
-	}
-	ibytes = modp->inst_bits / BITS_PER_BYTE;
-	if ((padbits = modp->inst_bits % BITS_PER_BYTE) != 0) {
-		padbits = BITS_PER_BYTE - padbits;
-		ibytes++;
-	}
-	hbytes = modp->largest_reg / BITS_PER_BYTE;
-	if (modp->largest_reg % BITS_PER_BYTE)
-		hbytes++;
-	CDEBUG(("cat_sendinst: ibytes=%d, hbytes=%d\n", ibytes, hbytes));
-	/* initialise the instruction sequence to 0xff */
-	for (i = 0; i < ibytes + hbytes; i++)
-		iseq[i] = 0xff;
-	cat_build_header(hseq, hbytes, modp->smallest_reg, modp->largest_reg);
-	cat_pack(iseq, modp->inst_bits, hseq, hbytes * BITS_PER_BYTE);
-	inst_buf[0] = inst;
-	inst_buf[1] = 0xFF >> (modp->largest_reg % BITS_PER_BYTE);
-	cat_pack(iseq, asicp->bit_location, inst_buf, asicp->ireg_length);
-#ifdef VOYAGER_CAT_DEBUG
-	printk("ins = 0x%x, iseq: ", inst);
-	for (i = 0; i < ibytes + hbytes; i++)
-		printk("0x%x ", iseq[i]);
-	printk("\n");
-#endif
-	if (cat_shiftout(iseq, ibytes, hbytes, padbits)) {
-		CDEBUG(("VOYAGER CAT: cat_sendinst: cat_shiftout failed\n"));
-		return 1;
-	}
-	CDEBUG(("CAT SHIFTOUT DONE\n"));
-	return 0;
-}
-
-static int
-cat_getdata(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-	    __u8 * value)
-{
-	if (!modp->scan_path_connected) {
-		if (asicp->asic_id != VOYAGER_CAT_ID) {
-			CDEBUG(("VOYAGER CAT: ERROR: cat_getdata to CAT asic with scan path connected\n"));
-			return 1;
-		}
-		if (reg > VOYAGER_SUBADDRHI)
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-		outb(VOYAGER_CAT_DRCYC, CAT_CMD);
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		*value = inb(CAT_DATA);
-		outb(0xAA, CAT_DATA);
-		if (inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
-			CDEBUG(("cat_getdata: failed to get VOYAGER_CAT_HEADER\n"));
-			return 1;
-		}
-		return 0;
-	} else {
-		__u16 sbits = modp->num_asics - 1 + asicp->ireg_length;
-		__u16 sbytes = sbits / BITS_PER_BYTE;
-		__u16 tbytes;
-		__u8 string[VOYAGER_MAX_SCAN_PATH],
-		    trailer[VOYAGER_MAX_REG_SIZE];
-		__u8 padbits;
-		int i;
-
-		outb(VOYAGER_CAT_DRCYC, CAT_CMD);
-
-		if ((padbits = sbits % BITS_PER_BYTE) != 0) {
-			padbits = BITS_PER_BYTE - padbits;
-			sbytes++;
-		}
-		tbytes = asicp->ireg_length / BITS_PER_BYTE;
-		if (asicp->ireg_length % BITS_PER_BYTE)
-			tbytes++;
-		CDEBUG(("cat_getdata: tbytes = %d, sbytes = %d, padbits = %d\n",
-			tbytes, sbytes, padbits));
-		cat_build_header(trailer, tbytes, 1, asicp->ireg_length);
-
-		for (i = tbytes - 1; i >= 0; i--) {
-			outb(trailer[i], CAT_DATA);
-			string[sbytes + i] = inb(CAT_DATA);
-		}
-
-		for (i = sbytes - 1; i >= 0; i--) {
-			outb(0xaa, CAT_DATA);
-			string[i] = inb(CAT_DATA);
-		}
-		*value = 0;
-		cat_unpack(string,
-			   padbits + (tbytes * BITS_PER_BYTE) +
-			   asicp->asic_location, value, asicp->ireg_length);
-#ifdef VOYAGER_CAT_DEBUG
-		printk("value=0x%x, string: ", *value);
-		for (i = 0; i < tbytes + sbytes; i++)
-			printk("0x%x ", string[i]);
-		printk("\n");
-#endif
-
-		/* sanity check the rest of the return */
-		for (i = 0; i < tbytes; i++) {
-			__u8 input = 0;
-
-			cat_unpack(string, padbits + (i * BITS_PER_BYTE),
-				   &input, BITS_PER_BYTE);
-			if (trailer[i] != input) {
-				CDEBUG(("cat_getdata: failed to sanity check rest of ret(%d) 0x%x != 0x%x\n", i, input, trailer[i]));
-				return 1;
-			}
-		}
-		CDEBUG(("cat_getdata DONE\n"));
-		return 0;
-	}
-}
-
-static int
-cat_shiftout(__u8 * data, __u16 data_bytes, __u16 header_bytes, __u8 pad_bits)
-{
-	int i;
-
-	for (i = data_bytes + header_bytes - 1; i >= header_bytes; i--)
-		outb(data[i], CAT_DATA);
-
-	for (i = header_bytes - 1; i >= 0; i--) {
-		__u8 header = 0;
-		__u8 input;
-
-		outb(data[i], CAT_DATA);
-		input = inb(CAT_DATA);
-		CDEBUG(("cat_shiftout: returned 0x%x\n", input));
-		cat_unpack(data, ((data_bytes + i) * BITS_PER_BYTE) - pad_bits,
-			   &header, BITS_PER_BYTE);
-		if (input != header) {
-			CDEBUG(("VOYAGER CAT: cat_shiftout failed to return header 0x%x != 0x%x\n", input, header));
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static int
-cat_senddata(voyager_module_t * modp, voyager_asic_t * asicp,
-	     __u8 reg, __u8 value)
-{
-	outb(VOYAGER_CAT_DRCYC, CAT_CMD);
-	if (!modp->scan_path_connected) {
-		if (asicp->asic_id != VOYAGER_CAT_ID) {
-			CDEBUG(("VOYAGER CAT: ERROR: scan path disconnected when asic != CAT\n"));
-			return 1;
-		}
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		outb(value, CAT_DATA);
-		if (inb(CAT_DATA) != VOYAGER_CAT_HEADER) {
-			CDEBUG(("cat_senddata: failed to get correct header response to sent data\n"));
-			return 1;
-		}
-		if (reg > VOYAGER_SUBADDRHI) {
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-		}
-
-		return 0;
-	} else {
-		__u16 hbytes = asicp->ireg_length / BITS_PER_BYTE;
-		__u16 dbytes =
-		    (modp->num_asics - 1 + asicp->ireg_length) / BITS_PER_BYTE;
-		__u8 padbits, dseq[VOYAGER_MAX_SCAN_PATH],
-		    hseq[VOYAGER_MAX_REG_SIZE];
-		int i;
-
-		if ((padbits = (modp->num_asics - 1
-				+ asicp->ireg_length) % BITS_PER_BYTE) != 0) {
-			padbits = BITS_PER_BYTE - padbits;
-			dbytes++;
-		}
-		if (asicp->ireg_length % BITS_PER_BYTE)
-			hbytes++;
-
-		cat_build_header(hseq, hbytes, 1, asicp->ireg_length);
-
-		for (i = 0; i < dbytes + hbytes; i++)
-			dseq[i] = 0xff;
-		CDEBUG(("cat_senddata: dbytes=%d, hbytes=%d, padbits=%d\n",
-			dbytes, hbytes, padbits));
-		cat_pack(dseq, modp->num_asics - 1 + asicp->ireg_length,
-			 hseq, hbytes * BITS_PER_BYTE);
-		cat_pack(dseq, asicp->asic_location, &value,
-			 asicp->ireg_length);
-#ifdef VOYAGER_CAT_DEBUG
-		printk("dseq ");
-		for (i = 0; i < hbytes + dbytes; i++) {
-			printk("0x%x ", dseq[i]);
-		}
-		printk("\n");
-#endif
-		return cat_shiftout(dseq, dbytes, hbytes, padbits);
-	}
-}
-
-static int
-cat_write(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg, __u8 value)
-{
-	if (cat_sendinst(modp, asicp, reg, VOYAGER_WRITE_CONFIG))
-		return 1;
-	return cat_senddata(modp, asicp, reg, value);
-}
-
-static int
-cat_read(voyager_module_t * modp, voyager_asic_t * asicp, __u8 reg,
-	 __u8 * value)
-{
-	if (cat_sendinst(modp, asicp, reg, VOYAGER_READ_CONFIG))
-		return 1;
-	return cat_getdata(modp, asicp, reg, value);
-}
-
-static int
-cat_subaddrsetup(voyager_module_t * modp, voyager_asic_t * asicp, __u16 offset,
-		 __u16 len)
-{
-	__u8 val;
-
-	if (len > 1) {
-		/* set auto increment */
-		__u8 newval;
-
-		if (cat_read(modp, asicp, VOYAGER_AUTO_INC_REG, &val)) {
-			CDEBUG(("cat_subaddrsetup: read of VOYAGER_AUTO_INC_REG failed\n"));
-			return 1;
-		}
-		CDEBUG(("cat_subaddrsetup: VOYAGER_AUTO_INC_REG = 0x%x\n",
-			val));
-		newval = val | VOYAGER_AUTO_INC;
-		if (newval != val) {
-			if (cat_write(modp, asicp, VOYAGER_AUTO_INC_REG, val)) {
-				CDEBUG(("cat_subaddrsetup: write to VOYAGER_AUTO_INC_REG failed\n"));
-				return 1;
-			}
-		}
-	}
-	if (cat_write(modp, asicp, VOYAGER_SUBADDRLO, (__u8) (offset & 0xff))) {
-		CDEBUG(("cat_subaddrsetup: write to SUBADDRLO failed\n"));
-		return 1;
-	}
-	if (asicp->subaddr > VOYAGER_SUBADDR_LO) {
-		if (cat_write
-		    (modp, asicp, VOYAGER_SUBADDRHI, (__u8) (offset >> 8))) {
-			CDEBUG(("cat_subaddrsetup: write to SUBADDRHI failed\n"));
-			return 1;
-		}
-		cat_read(modp, asicp, VOYAGER_SUBADDRHI, &val);
-		CDEBUG(("cat_subaddrsetup: offset = %d, hi = %d\n", offset,
-			val));
-	}
-	cat_read(modp, asicp, VOYAGER_SUBADDRLO, &val);
-	CDEBUG(("cat_subaddrsetup: offset = %d, lo = %d\n", offset, val));
-	return 0;
-}
-
-static int
-cat_subwrite(voyager_module_t * modp, voyager_asic_t * asicp, __u16 offset,
-	     __u16 len, void *buf)
-{
-	int i, retval;
-
-	/* FIXME: need special actions for VOYAGER_CAT_ID here */
-	if (asicp->asic_id == VOYAGER_CAT_ID) {
-		CDEBUG(("cat_subwrite: ATTEMPT TO WRITE TO CAT ASIC\n"));
-		/* FIXME -- This is supposed to be handled better
-		 * There is a problem writing to the cat asic in the
-		 * PSI.  The 30us delay seems to work, though */
-		udelay(30);
-	}
-
-	if ((retval = cat_subaddrsetup(modp, asicp, offset, len)) != 0) {
-		printk("cat_subwrite: cat_subaddrsetup FAILED\n");
-		return retval;
-	}
-
-	if (cat_sendinst
-	    (modp, asicp, VOYAGER_SUBADDRDATA, VOYAGER_WRITE_CONFIG)) {
-		printk("cat_subwrite: cat_sendinst FAILED\n");
-		return 1;
-	}
-	for (i = 0; i < len; i++) {
-		if (cat_senddata(modp, asicp, 0xFF, ((__u8 *) buf)[i])) {
-			printk
-			    ("cat_subwrite: cat_sendata element at %d FAILED\n",
-			     i);
-			return 1;
-		}
-	}
-	return 0;
-}
-static int
-cat_subread(voyager_module_t * modp, voyager_asic_t * asicp, __u16 offset,
-	    __u16 len, void *buf)
-{
-	int i, retval;
-
-	if ((retval = cat_subaddrsetup(modp, asicp, offset, len)) != 0) {
-		CDEBUG(("cat_subread: cat_subaddrsetup FAILED\n"));
-		return retval;
-	}
-
-	if (cat_sendinst(modp, asicp, VOYAGER_SUBADDRDATA, VOYAGER_READ_CONFIG)) {
-		CDEBUG(("cat_subread: cat_sendinst failed\n"));
-		return 1;
-	}
-	for (i = 0; i < len; i++) {
-		if (cat_getdata(modp, asicp, 0xFF, &((__u8 *) buf)[i])) {
-			CDEBUG(("cat_subread: cat_getdata element %d failed\n",
-				i));
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/* buffer for storing EPROM data read in during initialisation */
-static __initdata __u8 eprom_buf[0xFFFF];
-static voyager_module_t *voyager_initial_module;
-
-/* Initialise the cat bus components.  We assume this is called by the
- * boot cpu *after* all memory initialisation has been done (so we can
- * use kmalloc) but before smp initialisation, so we can probe the SMP
- * configuration and pick up necessary information.  */
-void __init voyager_cat_init(void)
-{
-	voyager_module_t **modpp = &voyager_initial_module;
-	voyager_asic_t **asicpp;
-	voyager_asic_t *qabc_asic = NULL;
-	int i, j;
-	unsigned long qic_addr = 0;
-	__u8 qabc_data[0x20];
-	__u8 num_submodules, val;
-	voyager_eprom_hdr_t *eprom_hdr = (voyager_eprom_hdr_t *) & eprom_buf[0];
-
-	__u8 cmos[4];
-	unsigned long addr;
-
-	/* initiallise the SUS mailbox */
-	for (i = 0; i < sizeof(cmos); i++)
-		cmos[i] = voyager_extended_cmos_read(VOYAGER_DUMP_LOCATION + i);
-	addr = *(unsigned long *)cmos;
-	if ((addr & 0xff000000) != 0xff000000) {
-		printk(KERN_ERR
-		       "Voyager failed to get SUS mailbox (addr = 0x%lx\n",
-		       addr);
-	} else {
-		static struct resource res;
-
-		res.name = "voyager SUS";
-		res.start = addr;
-		res.end = addr + 0x3ff;
-
-		request_resource(&iomem_resource, &res);
-		voyager_SUS = (struct voyager_SUS *)
-		    ioremap(addr, 0x400);
-		printk(KERN_NOTICE "Voyager SUS mailbox version 0x%x\n",
-		       voyager_SUS->SUS_version);
-		voyager_SUS->kernel_version = VOYAGER_MAILBOX_VERSION;
-		voyager_SUS->kernel_flags = VOYAGER_OS_HAS_SYSINT;
-	}
-
-	/* clear the processor counts */
-	voyager_extended_vic_processors = 0;
-	voyager_quad_processors = 0;
-
-	printk("VOYAGER: beginning CAT bus probe\n");
-	/* set up the SuperSet Port Block which tells us where the
-	 * CAT communication port is */
-	sspb = inb(VOYAGER_SSPB_RELOCATION_PORT) * 0x100;
-	VDEBUG(("VOYAGER DEBUG: sspb = 0x%x\n", sspb));
-
-	/* now find out if were 8 slot or normal */
-	if ((inb(VIC_PROC_WHO_AM_I) & EIGHT_SLOT_IDENTIFIER)
-	    == EIGHT_SLOT_IDENTIFIER) {
-		voyager_8slot = 1;
-		printk(KERN_NOTICE
-		       "Voyager: Eight slot 51xx configuration detected\n");
-	}
-
-	for (i = VOYAGER_MIN_MODULE; i <= VOYAGER_MAX_MODULE; i++) {
-		__u8 input;
-		int asic;
-		__u16 eprom_size;
-		__u16 sp_offset;
-
-		outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-		outb(i, VOYAGER_CAT_CONFIG_PORT);
-
-		/* check the presence of the module */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		outb(VOYAGER_CAT_IRCYC, CAT_CMD);
-		outb(VOYAGER_CAT_HEADER, CAT_DATA);
-		/* stream series of alternating 1's and 0's to stimulate
-		 * response */
-		outb(0xAA, CAT_DATA);
-		input = inb(CAT_DATA);
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		if (input != VOYAGER_CAT_HEADER) {
-			continue;
-		}
-		CDEBUG(("VOYAGER DEBUG: found module id 0x%x, %s\n", i,
-			cat_module_name(i)));
-		*modpp = kmalloc(sizeof(voyager_module_t), GFP_KERNEL);	/*&voyager_module_storage[cat_count++]; */
-		if (*modpp == NULL) {
-			printk("**WARNING** kmalloc failure in cat_init\n");
-			continue;
-		}
-		memset(*modpp, 0, sizeof(voyager_module_t));
-		/* need temporary asic for cat_subread.  It will be
-		 * filled in correctly later */
-		(*modpp)->asic = kmalloc(sizeof(voyager_asic_t), GFP_KERNEL);	/*&voyager_asic_storage[asic_count]; */
-		if ((*modpp)->asic == NULL) {
-			printk("**WARNING** kmalloc failure in cat_init\n");
-			continue;
-		}
-		memset((*modpp)->asic, 0, sizeof(voyager_asic_t));
-		(*modpp)->asic->asic_id = VOYAGER_CAT_ID;
-		(*modpp)->asic->subaddr = VOYAGER_SUBADDR_HI;
-		(*modpp)->module_addr = i;
-		(*modpp)->scan_path_connected = 0;
-		if (i == VOYAGER_PSI) {
-			/* Exception leg for modules with no EEPROM */
-			printk("Module \"%s\"\n", cat_module_name(i));
-			continue;
-		}
-
-		CDEBUG(("cat_init: Reading eeprom for module 0x%x at offset %d\n", i, VOYAGER_XSUM_END_OFFSET));
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_disconnect(*modpp, (*modpp)->asic);
-		if (cat_subread(*modpp, (*modpp)->asic,
-				VOYAGER_XSUM_END_OFFSET, sizeof(eprom_size),
-				&eprom_size)) {
-			printk
-			    ("**WARNING**: Voyager couldn't read EPROM size for module 0x%x\n",
-			     i);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		if (eprom_size > sizeof(eprom_buf)) {
-			printk
-			    ("**WARNING**: Voyager insufficient size to read EPROM data, module 0x%x.  Need %d\n",
-			     i, eprom_size);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		CDEBUG(("cat_init: module 0x%x, eeprom_size %d\n", i,
-			eprom_size));
-		if (cat_subread
-		    (*modpp, (*modpp)->asic, 0, eprom_size, eprom_buf)) {
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		printk("Module \"%s\", version 0x%x, tracer 0x%x, asics %d\n",
-		       cat_module_name(i), eprom_hdr->version_id,
-		       *((__u32 *) eprom_hdr->tracer), eprom_hdr->num_asics);
-		(*modpp)->ee_size = eprom_hdr->ee_size;
-		(*modpp)->num_asics = eprom_hdr->num_asics;
-		asicpp = &((*modpp)->asic);
-		sp_offset = eprom_hdr->scan_path_offset;
-		/* All we really care about are the Quad cards.  We
-		 * identify them because they are in a processor slot
-		 * and have only four asics */
-		if ((i < 0x10 || (i >= 0x14 && i < 0x1c) || i > 0x1f)) {
-			modpp = &((*modpp)->next);
-			continue;
-		}
-		/* Now we know it's in a processor slot, does it have
-		 * a quad baseboard submodule */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_read(*modpp, (*modpp)->asic, VOYAGER_SUBMODPRESENT,
-			 &num_submodules);
-		/* lowest two bits, active low */
-		num_submodules = ~(0xfc | num_submodules);
-		CDEBUG(("VOYAGER CAT: %d submodules present\n",
-			num_submodules));
-		if (num_submodules == 0) {
-			/* fill in the dyadic extended processors */
-			__u8 cpu = i & 0x07;
-
-			printk("Module \"%s\": Dyadic Processor Card\n",
-			       cat_module_name(i));
-			voyager_extended_vic_processors |= (1 << cpu);
-			cpu += 4;
-			voyager_extended_vic_processors |= (1 << cpu);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-
-		/* now we want to read the asics on the first submodule,
-		 * which should be the quad base board */
-
-		cat_read(*modpp, (*modpp)->asic, VOYAGER_SUBMODSELECT, &val);
-		CDEBUG(("cat_init: SUBMODSELECT value = 0x%x\n", val));
-		val = (val & 0x7c) | VOYAGER_QUAD_BASEBOARD;
-		cat_write(*modpp, (*modpp)->asic, VOYAGER_SUBMODSELECT, val);
-
-		outb(VOYAGER_CAT_END, CAT_CMD);
-
-		CDEBUG(("cat_init: Reading eeprom for module 0x%x at offset %d\n", i, VOYAGER_XSUM_END_OFFSET));
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_disconnect(*modpp, (*modpp)->asic);
-		if (cat_subread(*modpp, (*modpp)->asic,
-				VOYAGER_XSUM_END_OFFSET, sizeof(eprom_size),
-				&eprom_size)) {
-			printk
-			    ("**WARNING**: Voyager couldn't read EPROM size for module 0x%x\n",
-			     i);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		if (eprom_size > sizeof(eprom_buf)) {
-			printk
-			    ("**WARNING**: Voyager insufficient size to read EPROM data, module 0x%x.  Need %d\n",
-			     i, eprom_size);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		CDEBUG(("cat_init: module 0x%x, eeprom_size %d\n", i,
-			eprom_size));
-		if (cat_subread
-		    (*modpp, (*modpp)->asic, 0, eprom_size, eprom_buf)) {
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			continue;
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-		/* Now do everything for the QBB submodule 1 */
-		(*modpp)->ee_size = eprom_hdr->ee_size;
-		(*modpp)->num_asics = eprom_hdr->num_asics;
-		asicpp = &((*modpp)->asic);
-		sp_offset = eprom_hdr->scan_path_offset;
-		/* get rid of the dummy CAT asic and read the real one */
-		kfree((*modpp)->asic);
-		for (asic = 0; asic < (*modpp)->num_asics; asic++) {
-			int j;
-			voyager_asic_t *asicp = *asicpp = kzalloc(sizeof(voyager_asic_t), GFP_KERNEL);	/*&voyager_asic_storage[asic_count++]; */
-			voyager_sp_table_t *sp_table;
-			voyager_at_t *asic_table;
-			voyager_jtt_t *jtag_table;
-
-			if (asicp == NULL) {
-				printk
-				    ("**WARNING** kmalloc failure in cat_init\n");
-				continue;
-			}
-			asicpp = &(asicp->next);
-			asicp->asic_location = asic;
-			sp_table =
-			    (voyager_sp_table_t *) (eprom_buf + sp_offset);
-			asicp->asic_id = sp_table->asic_id;
-			asic_table =
-			    (voyager_at_t *) (eprom_buf +
-					      sp_table->asic_data_offset);
-			for (j = 0; j < 4; j++)
-				asicp->jtag_id[j] = asic_table->jtag_id[j];
-			jtag_table =
-			    (voyager_jtt_t *) (eprom_buf +
-					       asic_table->jtag_offset);
-			asicp->ireg_length = jtag_table->ireg_len;
-			asicp->bit_location = (*modpp)->inst_bits;
-			(*modpp)->inst_bits += asicp->ireg_length;
-			if (asicp->ireg_length > (*modpp)->largest_reg)
-				(*modpp)->largest_reg = asicp->ireg_length;
-			if (asicp->ireg_length < (*modpp)->smallest_reg ||
-			    (*modpp)->smallest_reg == 0)
-				(*modpp)->smallest_reg = asicp->ireg_length;
-			CDEBUG(("asic 0x%x, ireg_length=%d, bit_location=%d\n",
-				asicp->asic_id, asicp->ireg_length,
-				asicp->bit_location));
-			if (asicp->asic_id == VOYAGER_QUAD_QABC) {
-				CDEBUG(("VOYAGER CAT: QABC ASIC found\n"));
-				qabc_asic = asicp;
-			}
-			sp_offset += sizeof(voyager_sp_table_t);
-		}
-		CDEBUG(("Module inst_bits = %d, largest_reg = %d, smallest_reg=%d\n", (*modpp)->inst_bits, (*modpp)->largest_reg, (*modpp)->smallest_reg));
-		/* OK, now we have the QUAD ASICs set up, use them.
-		 * we need to:
-		 *
-		 * 1. Find the Memory area for the Quad CPIs.
-		 * 2. Find the Extended VIC processor
-		 * 3. Configure a second extended VIC processor (This
-		 *    cannot be done for the 51xx.
-		 * */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_connect(*modpp, (*modpp)->asic);
-		CDEBUG(("CAT CONNECTED!!\n"));
-		cat_subread(*modpp, qabc_asic, 0, sizeof(qabc_data), qabc_data);
-		qic_addr = qabc_data[5] << 8;
-		qic_addr = (qic_addr | qabc_data[6]) << 8;
-		qic_addr = (qic_addr | qabc_data[7]) << 8;
-		printk
-		    ("Module \"%s\": Quad Processor Card; CPI 0x%lx, SET=0x%x\n",
-		     cat_module_name(i), qic_addr, qabc_data[8]);
-#if 0				/* plumbing fails---FIXME */
-		if ((qabc_data[8] & 0xf0) == 0) {
-			/* FIXME: 32 way 8 CPU slot monster cannot be
-			 * plumbed this way---need to check for it */
-
-			printk("Plumbing second Extended Quad Processor\n");
-			/* second VIC line hardwired to Quad CPU 1 */
-			qabc_data[8] |= 0x20;
-			cat_subwrite(*modpp, qabc_asic, 8, 1, &qabc_data[8]);
-#ifdef VOYAGER_CAT_DEBUG
-			/* verify plumbing */
-			cat_subread(*modpp, qabc_asic, 8, 1, &qabc_data[8]);
-			if ((qabc_data[8] & 0xf0) == 0) {
-				CDEBUG(("PLUMBING FAILED: 0x%x\n",
-					qabc_data[8]));
-			}
-#endif
-		}
-#endif
-
-		{
-			struct resource *res =
-			    kzalloc(sizeof(struct resource), GFP_KERNEL);
-			res->name = kmalloc(128, GFP_KERNEL);
-			sprintf((char *)res->name, "Voyager %s Quad CPI",
-				cat_module_name(i));
-			res->start = qic_addr;
-			res->end = qic_addr + 0x3ff;
-			request_resource(&iomem_resource, res);
-		}
-
-		qic_addr = (unsigned long)ioremap_cache(qic_addr, 0x400);
-
-		for (j = 0; j < 4; j++) {
-			__u8 cpu;
-
-			if (voyager_8slot) {
-				/* 8 slot has a different mapping,
-				 * each slot has only one vic line, so
-				 * 1 cpu in each slot must be < 8 */
-				cpu = (i & 0x07) + j * 8;
-			} else {
-				cpu = (i & 0x03) + j * 4;
-			}
-			if ((qabc_data[8] & (1 << j))) {
-				voyager_extended_vic_processors |= (1 << cpu);
-			}
-			if (qabc_data[8] & (1 << (j + 4))) {
-				/* Second SET register plumbed: Quad
-				 * card has two VIC connected CPUs.
-				 * Secondary cannot be booted as a VIC
-				 * CPU */
-				voyager_extended_vic_processors |= (1 << cpu);
-				voyager_allowed_boot_processors &=
-				    (~(1 << cpu));
-			}
-
-			voyager_quad_processors |= (1 << cpu);
-			voyager_quad_cpi_addr[cpu] = (struct voyager_qic_cpi *)
-			    (qic_addr + (j << 8));
-			CDEBUG(("CPU%d: CPI address 0x%lx\n", cpu,
-				(unsigned long)voyager_quad_cpi_addr[cpu]));
-		}
-		outb(VOYAGER_CAT_END, CAT_CMD);
-
-		*asicpp = NULL;
-		modpp = &((*modpp)->next);
-	}
-	*modpp = NULL;
-	printk
-	    ("CAT Bus Initialisation finished: extended procs 0x%x, quad procs 0x%x, allowed vic boot = 0x%x\n",
-	     voyager_extended_vic_processors, voyager_quad_processors,
-	     voyager_allowed_boot_processors);
-	request_resource(&ioport_resource, &vic_res);
-	if (voyager_quad_processors)
-		request_resource(&ioport_resource, &qic_res);
-	/* set up the front power switch */
-}
-
-int voyager_cat_readb(__u8 module, __u8 asic, int reg)
-{
-	return 0;
-}
-
-static int cat_disconnect(voyager_module_t * modp, voyager_asic_t * asicp)
-{
-	__u8 val;
-	int err = 0;
-
-	if (!modp->scan_path_connected)
-		return 0;
-	if (asicp->asic_id != VOYAGER_CAT_ID) {
-		CDEBUG(("cat_disconnect: ASIC is not CAT\n"));
-		return 1;
-	}
-	err = cat_read(modp, asicp, VOYAGER_SCANPATH, &val);
-	if (err) {
-		CDEBUG(("cat_disconnect: failed to read SCANPATH\n"));
-		return err;
-	}
-	val &= VOYAGER_DISCONNECT_ASIC;
-	err = cat_write(modp, asicp, VOYAGER_SCANPATH, val);
-	if (err) {
-		CDEBUG(("cat_disconnect: failed to write SCANPATH\n"));
-		return err;
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	modp->scan_path_connected = 0;
-
-	return 0;
-}
-
-static int cat_connect(voyager_module_t * modp, voyager_asic_t * asicp)
-{
-	__u8 val;
-	int err = 0;
-
-	if (modp->scan_path_connected)
-		return 0;
-	if (asicp->asic_id != VOYAGER_CAT_ID) {
-		CDEBUG(("cat_connect: ASIC is not CAT\n"));
-		return 1;
-	}
-
-	err = cat_read(modp, asicp, VOYAGER_SCANPATH, &val);
-	if (err) {
-		CDEBUG(("cat_connect: failed to read SCANPATH\n"));
-		return err;
-	}
-	val |= VOYAGER_CONNECT_ASIC;
-	err = cat_write(modp, asicp, VOYAGER_SCANPATH, val);
-	if (err) {
-		CDEBUG(("cat_connect: failed to write SCANPATH\n"));
-		return err;
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	modp->scan_path_connected = 1;
-
-	return 0;
-}
-
-void voyager_cat_power_off(void)
-{
-	/* Power the machine off by writing to the PSI over the CAT
-	 * bus */
-	__u8 data;
-	voyager_module_t psi = { 0 };
-	voyager_asic_t psi_asic = { 0 };
-
-	psi.asic = &psi_asic;
-	psi.asic->asic_id = VOYAGER_CAT_ID;
-	psi.asic->subaddr = VOYAGER_SUBADDR_HI;
-	psi.module_addr = VOYAGER_PSI;
-	psi.scan_path_connected = 0;
-
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	/* Connect the PSI to the CAT Bus */
-	outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_disconnect(&psi, &psi_asic);
-	/* Read the status */
-	cat_subread(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	CDEBUG(("PSI STATUS 0x%x\n", data));
-	/* These two writes are power off prep and perform */
-	data = PSI_CLEAR;
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	data = PSI_POWER_DOWN;
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG, 1, &data);
-	outb(VOYAGER_CAT_END, CAT_CMD);
-}
-
-struct voyager_status voyager_status = { 0 };
-
-void voyager_cat_psi(__u8 cmd, __u16 reg, __u8 * data)
-{
-	voyager_module_t psi = { 0 };
-	voyager_asic_t psi_asic = { 0 };
-
-	psi.asic = &psi_asic;
-	psi.asic->asic_id = VOYAGER_CAT_ID;
-	psi.asic->subaddr = VOYAGER_SUBADDR_HI;
-	psi.module_addr = VOYAGER_PSI;
-	psi.scan_path_connected = 0;
-
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	/* Connect the PSI to the CAT Bus */
-	outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_disconnect(&psi, &psi_asic);
-	switch (cmd) {
-	case VOYAGER_PSI_READ:
-		cat_read(&psi, &psi_asic, reg, data);
-		break;
-	case VOYAGER_PSI_WRITE:
-		cat_write(&psi, &psi_asic, reg, *data);
-		break;
-	case VOYAGER_PSI_SUBREAD:
-		cat_subread(&psi, &psi_asic, reg, 1, data);
-		break;
-	case VOYAGER_PSI_SUBWRITE:
-		cat_subwrite(&psi, &psi_asic, reg, 1, data);
-		break;
-	default:
-		printk(KERN_ERR "Voyager PSI, unrecognised command %d\n", cmd);
-		break;
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-}
-
-void voyager_cat_do_common_interrupt(void)
-{
-	/* This is caused either by a memory parity error or something
-	 * in the PSI */
-	__u8 data;
-	voyager_module_t psi = { 0 };
-	voyager_asic_t psi_asic = { 0 };
-	struct voyager_psi psi_reg;
-	int i;
-      re_read:
-	psi.asic = &psi_asic;
-	psi.asic->asic_id = VOYAGER_CAT_ID;
-	psi.asic->subaddr = VOYAGER_SUBADDR_HI;
-	psi.module_addr = VOYAGER_PSI;
-	psi.scan_path_connected = 0;
-
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	/* Connect the PSI to the CAT Bus */
-	outb(VOYAGER_CAT_DESELECT, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_PSI, VOYAGER_CAT_CONFIG_PORT);
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	cat_disconnect(&psi, &psi_asic);
-	/* Read the status.  NOTE: Need to read *all* the PSI regs here
-	 * otherwise the cmn int will be reasserted */
-	for (i = 0; i < sizeof(psi_reg.regs); i++) {
-		cat_read(&psi, &psi_asic, i, &((__u8 *) & psi_reg.regs)[i]);
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-	if ((psi_reg.regs.checkbit & 0x02) == 0) {
-		psi_reg.regs.checkbit |= 0x02;
-		cat_write(&psi, &psi_asic, 5, psi_reg.regs.checkbit);
-		printk("VOYAGER RE-READ PSI\n");
-		goto re_read;
-	}
-	outb(VOYAGER_CAT_RUN, CAT_CMD);
-	for (i = 0; i < sizeof(psi_reg.subregs); i++) {
-		/* This looks strange, but the PSI doesn't do auto increment
-		 * correctly */
-		cat_subread(&psi, &psi_asic, VOYAGER_PSI_SUPPLY_REG + i,
-			    1, &((__u8 *) & psi_reg.subregs)[i]);
-	}
-	outb(VOYAGER_CAT_END, CAT_CMD);
-#ifdef VOYAGER_CAT_DEBUG
-	printk("VOYAGER PSI: ");
-	for (i = 0; i < sizeof(psi_reg.regs); i++)
-		printk("%02x ", ((__u8 *) & psi_reg.regs)[i]);
-	printk("\n           ");
-	for (i = 0; i < sizeof(psi_reg.subregs); i++)
-		printk("%02x ", ((__u8 *) & psi_reg.subregs)[i]);
-	printk("\n");
-#endif
-	if (psi_reg.regs.intstatus & PSI_MON) {
-		/* switch off or power fail */
-
-		if (psi_reg.subregs.supply & PSI_SWITCH_OFF) {
-			if (voyager_status.switch_off) {
-				printk(KERN_ERR
-				       "Voyager front panel switch turned off again---Immediate power off!\n");
-				voyager_cat_power_off();
-				/* not reached */
-			} else {
-				printk(KERN_ERR
-				       "Voyager front panel switch turned off\n");
-				voyager_status.switch_off = 1;
-				voyager_status.request_from_kernel = 1;
-				wake_up_process(voyager_thread);
-			}
-			/* Tell the hardware we're taking care of the
-			 * shutdown, otherwise it will power the box off
-			 * within 3 seconds of the switch being pressed and,
-			 * which is much more important to us, continue to 
-			 * assert the common interrupt */
-			data = PSI_CLR_SWITCH_OFF;
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-			cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_SUPPLY_REG,
-				     1, &data);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-		} else {
-
-			VDEBUG(("Voyager ac fail reg 0x%x\n",
-				psi_reg.subregs.ACfail));
-			if ((psi_reg.subregs.ACfail & AC_FAIL_STAT_CHANGE) == 0) {
-				/* No further update */
-				return;
-			}
-#if 0
-			/* Don't bother trying to find out who failed.
-			 * FIXME: This probably makes the code incorrect on
-			 * anything other than a 345x */
-			for (i = 0; i < 5; i++) {
-				if (psi_reg.subregs.ACfail & (1 << i)) {
-					break;
-				}
-			}
-			printk(KERN_NOTICE "AC FAIL IN SUPPLY %d\n", i);
-#endif
-			/* DON'T do this: it shuts down the AC PSI 
-			   outb(VOYAGER_CAT_RUN, CAT_CMD);
-			   data = PSI_MASK_MASK | i;
-			   cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_MASK,
-			   1, &data);
-			   outb(VOYAGER_CAT_END, CAT_CMD);
-			 */
-			printk(KERN_ERR "Voyager AC power failure\n");
-			outb(VOYAGER_CAT_RUN, CAT_CMD);
-			data = PSI_COLD_START;
-			cat_subwrite(&psi, &psi_asic, VOYAGER_PSI_GENERAL_REG,
-				     1, &data);
-			outb(VOYAGER_CAT_END, CAT_CMD);
-			voyager_status.power_fail = 1;
-			voyager_status.request_from_kernel = 1;
-			wake_up_process(voyager_thread);
-		}
-
-	} else if (psi_reg.regs.intstatus & PSI_FAULT) {
-		/* Major fault! */
-		printk(KERN_ERR
-		       "Voyager PSI Detected major fault, immediate power off!\n");
-		voyager_cat_power_off();
-		/* not reached */
-	} else if (psi_reg.regs.intstatus & (PSI_DC_FAIL | PSI_ALARM
-					     | PSI_CURRENT | PSI_DVM
-					     | PSI_PSCFAULT | PSI_STAT_CHG)) {
-		/* other psi fault */
-
-		printk(KERN_WARNING "Voyager PSI status 0x%x\n", data);
-		/* clear the PSI fault */
-		outb(VOYAGER_CAT_RUN, CAT_CMD);
-		cat_write(&psi, &psi_asic, VOYAGER_PSI_STATUS_REG, 0);
-		outb(VOYAGER_CAT_END, CAT_CMD);
-	}
-}
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
deleted file mode 100644
index 98e3c2bc756..00000000000
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ /dev/null
@@ -1,1805 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This file provides all the same external entries as smp.c but uses
- * the voyager hal to provide the functionality
- */
-#include <linux/cpu.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bootmem.h>
-#include <linux/completion.h>
-#include <asm/desc.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/arch_hooks.h>
-#include <asm/trampoline.h>
-
-/* TLB state -- visible externally, indexed physically */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 };
-
-/* CPU IRQ affinity -- set to all ones initially */
-static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned =
-	{[0 ... NR_CPUS-1]  = ~0UL };
-
-/* per CPU data structure (for /proc/cpuinfo et al), visible externally
- * indexed physically */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
-EXPORT_PER_CPU_SYMBOL(cpu_info);
-
-/* physical ID of the CPU used to boot the system */
-unsigned char boot_cpu_id;
-
-/* The memory line addresses for the Quad CPIs */
-struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS] __cacheline_aligned;
-
-/* The masks for the Extended VIC processors, filled in by cat_init */
-__u32 voyager_extended_vic_processors = 0;
-
-/* Masks for the extended Quad processors which cannot be VIC booted */
-__u32 voyager_allowed_boot_processors = 0;
-
-/* The mask for the Quad Processors (both extended and non-extended) */
-__u32 voyager_quad_processors = 0;
-
-/* Total count of live CPUs, used in process.c to display
- * the CPU information and in irq.c for the per CPU irq
- * activity count.  Finally exported by i386_ksyms.c */
-static int voyager_extended_cpus = 1;
-
-/* Used for the invalidate map that's also checked in the spinlock */
-static volatile unsigned long smp_invalidate_needed;
-
-/* Bitmask of CPUs present in the system - exported by i386_syms.c, used
- * by scheduler but indexed physically */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
-
-/* The internal functions */
-static void send_CPI(__u32 cpuset, __u8 cpi);
-static void ack_CPI(__u8 cpi);
-static int ack_QIC_CPI(__u8 cpi);
-static void ack_special_QIC_CPI(__u8 cpi);
-static void ack_VIC_CPI(__u8 cpi);
-static void send_CPI_allbutself(__u8 cpi);
-static void mask_vic_irq(unsigned int irq);
-static void unmask_vic_irq(unsigned int irq);
-static unsigned int startup_vic_irq(unsigned int irq);
-static void enable_local_vic_irq(unsigned int irq);
-static void disable_local_vic_irq(unsigned int irq);
-static void before_handle_vic_irq(unsigned int irq);
-static void after_handle_vic_irq(unsigned int irq);
-static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask);
-static void ack_vic_irq(unsigned int irq);
-static void vic_enable_cpi(void);
-static void do_boot_cpu(__u8 cpuid);
-static void do_quad_bootstrap(void);
-static void initialize_secondary(void);
-
-int hard_smp_processor_id(void);
-int safe_smp_processor_id(void);
-
-/* Inline functions */
-static inline void send_one_QIC_CPI(__u8 cpu, __u8 cpi)
-{
-	voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi =
-	    (smp_processor_id() << 16) + cpi;
-}
-
-static inline void send_QIC_CPI(__u32 cpuset, __u8 cpi)
-{
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpuset & (1 << cpu)) {
-#ifdef VOYAGER_DEBUG
-			if (!cpu_online(cpu))
-				VDEBUG(("CPU%d sending cpi %d to CPU%d not in "
-					"cpu_online_map\n",
-					hard_smp_processor_id(), cpi, cpu));
-#endif
-			send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET);
-		}
-	}
-}
-
-static inline void wrapper_smp_local_timer_interrupt(void)
-{
-	irq_enter();
-	smp_local_timer_interrupt();
-	irq_exit();
-}
-
-static inline void send_one_CPI(__u8 cpu, __u8 cpi)
-{
-	if (voyager_quad_processors & (1 << cpu))
-		send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET);
-	else
-		send_CPI(1 << cpu, cpi);
-}
-
-static inline void send_CPI_allbutself(__u8 cpi)
-{
-	__u8 cpu = smp_processor_id();
-	__u32 mask = cpus_addr(cpu_online_map)[0] & ~(1 << cpu);
-	send_CPI(mask, cpi);
-}
-
-static inline int is_cpu_quad(void)
-{
-	__u8 cpumask = inb(VIC_PROC_WHO_AM_I);
-	return ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER);
-}
-
-static inline int is_cpu_extended(void)
-{
-	__u8 cpu = hard_smp_processor_id();
-
-	return (voyager_extended_vic_processors & (1 << cpu));
-}
-
-static inline int is_cpu_vic_boot(void)
-{
-	__u8 cpu = hard_smp_processor_id();
-
-	return (voyager_extended_vic_processors
-		& voyager_allowed_boot_processors & (1 << cpu));
-}
-
-static inline void ack_CPI(__u8 cpi)
-{
-	switch (cpi) {
-	case VIC_CPU_BOOT_CPI:
-		if (is_cpu_quad() && !is_cpu_vic_boot())
-			ack_QIC_CPI(cpi);
-		else
-			ack_VIC_CPI(cpi);
-		break;
-	case VIC_SYS_INT:
-	case VIC_CMN_INT:
-		/* These are slightly strange.  Even on the Quad card,
-		 * They are vectored as VIC CPIs */
-		if (is_cpu_quad())
-			ack_special_QIC_CPI(cpi);
-		else
-			ack_VIC_CPI(cpi);
-		break;
-	default:
-		printk("VOYAGER ERROR: CPI%d is in common CPI code\n", cpi);
-		break;
-	}
-}
-
-/* local variables */
-
-/* The VIC IRQ descriptors -- these look almost identical to the
- * 8259 IRQs except that masks and things must be kept per processor
- */
-static struct irq_chip vic_chip = {
-	.name = "VIC",
-	.startup = startup_vic_irq,
-	.mask = mask_vic_irq,
-	.unmask = unmask_vic_irq,
-	.set_affinity = set_vic_irq_affinity,
-};
-
-/* used to count up as CPUs are brought on line (starts at 0) */
-static int cpucount = 0;
-
-/* The per cpu profile stuff - used in smp_local_timer_interrupt */
-static DEFINE_PER_CPU(int, prof_multiplier) = 1;
-static DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
-static DEFINE_PER_CPU(int, prof_counter) = 1;
-
-/* the map used to check if a CPU has booted */
-static __u32 cpu_booted_map;
-
-/* the synchronize flag used to hold all secondary CPUs spinning in
- * a tight loop until the boot sequence is ready for them */
-static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
-
-/* This is for the new dynamic CPU boot code */
-
-/* The per processor IRQ masks (these are usually kept in sync) */
-static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned;
-
-/* the list of IRQs to be enabled by the VIC_ENABLE_IRQ_CPI */
-static __u16 vic_irq_enable_mask[NR_CPUS] __cacheline_aligned = { 0 };
-
-/* Lock for enable/disable of VIC interrupts */
-static __cacheline_aligned DEFINE_SPINLOCK(vic_irq_lock);
-
-/* The boot processor is correctly set up in PC mode when it
- * comes up, but the secondaries need their master/slave 8259
- * pairs initializing correctly */
-
-/* Interrupt counters (per cpu) and total - used to try to
- * even up the interrupt handling routines */
-static long vic_intr_total = 0;
-static long vic_intr_count[NR_CPUS] __cacheline_aligned = { 0 };
-static unsigned long vic_tick[NR_CPUS] __cacheline_aligned = { 0 };
-
-/* Since we can only use CPI0, we fake all the other CPIs */
-static unsigned long vic_cpi_mailbox[NR_CPUS] __cacheline_aligned;
-
-/* debugging routine to read the isr of the cpu's pic */
-static inline __u16 vic_read_isr(void)
-{
-	__u16 isr;
-
-	outb(0x0b, 0xa0);
-	isr = inb(0xa0) << 8;
-	outb(0x0b, 0x20);
-	isr |= inb(0x20);
-
-	return isr;
-}
-
-static __init void qic_setup(void)
-{
-	if (!is_cpu_quad()) {
-		/* not a quad, no setup */
-		return;
-	}
-	outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0);
-	outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1);
-
-	if (is_cpu_extended()) {
-		/* the QIC duplicate of the VIC base register */
-		outb(VIC_DEFAULT_CPI_BASE, QIC_VIC_CPI_BASE_REGISTER);
-		outb(QIC_DEFAULT_CPI_BASE, QIC_CPI_BASE_REGISTER);
-
-		/* FIXME: should set up the QIC timer and memory parity
-		 * error vectors here */
-	}
-}
-
-static __init void vic_setup_pic(void)
-{
-	outb(1, VIC_REDIRECT_REGISTER_1);
-	/* clear the claim registers for dynamic routing */
-	outb(0, VIC_CLAIM_REGISTER_0);
-	outb(0, VIC_CLAIM_REGISTER_1);
-
-	outb(0, VIC_PRIORITY_REGISTER);
-	/* Set the Primary and Secondary Microchannel vector
-	 * bases to be the same as the ordinary interrupts
-	 *
-	 * FIXME: This would be more efficient using separate
-	 * vectors. */
-	outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE);
-	outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE);
-	/* Now initiallise the master PIC belonging to this CPU by
-	 * sending the four ICWs */
-
-	/* ICW1: level triggered, ICW4 needed */
-	outb(0x19, 0x20);
-
-	/* ICW2: vector base */
-	outb(FIRST_EXTERNAL_VECTOR, 0x21);
-
-	/* ICW3: slave at line 2 */
-	outb(0x04, 0x21);
-
-	/* ICW4: 8086 mode */
-	outb(0x01, 0x21);
-
-	/* now the same for the slave PIC */
-
-	/* ICW1: level trigger, ICW4 needed */
-	outb(0x19, 0xA0);
-
-	/* ICW2: slave vector base */
-	outb(FIRST_EXTERNAL_VECTOR + 8, 0xA1);
-
-	/* ICW3: slave ID */
-	outb(0x02, 0xA1);
-
-	/* ICW4: 8086 mode */
-	outb(0x01, 0xA1);
-}
-
-static void do_quad_bootstrap(void)
-{
-	if (is_cpu_quad() && is_cpu_vic_boot()) {
-		int i;
-		unsigned long flags;
-		__u8 cpuid = hard_smp_processor_id();
-
-		local_irq_save(flags);
-
-		for (i = 0; i < 4; i++) {
-			/* FIXME: this would be >>3 &0x7 on the 32 way */
-			if (((cpuid >> 2) & 0x03) == i)
-				/* don't lower our own mask! */
-				continue;
-
-			/* masquerade as local Quad CPU */
-			outb(QIC_CPUID_ENABLE | i, QIC_PROCESSOR_ID);
-			/* enable the startup CPI */
-			outb(QIC_BOOT_CPI_MASK, QIC_MASK_REGISTER1);
-			/* restore cpu id */
-			outb(0, QIC_PROCESSOR_ID);
-		}
-		local_irq_restore(flags);
-	}
-}
-
-void prefill_possible_map(void)
-{
-	/* This is empty on voyager because we need a much
-	 * earlier detection which is done in find_smp_config */
-}
-
-/* Set up all the basic stuff: read the SMP config and make all the
- * SMP information reflect only the boot cpu.  All others will be
- * brought on-line later. */
-void __init find_smp_config(void)
-{
-	int i;
-
-	boot_cpu_id = hard_smp_processor_id();
-
-	printk("VOYAGER SMP: Boot cpu is %d\n", boot_cpu_id);
-
-	/* initialize the CPU structures (moved from smp_boot_cpus) */
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_irq_affinity[i] = ~0;
-	cpu_online_map = cpumask_of_cpu(boot_cpu_id);
-
-	/* The boot CPU must be extended */
-	voyager_extended_vic_processors = 1 << boot_cpu_id;
-	/* initially, all of the first 8 CPUs can boot */
-	voyager_allowed_boot_processors = 0xff;
-	/* set up everything for just this CPU, we can alter
-	 * this as we start the other CPUs later */
-	/* now get the CPU disposition from the extended CMOS */
-	cpus_addr(phys_cpu_present_map)[0] =
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
-	cpus_addr(phys_cpu_present_map)[0] |=
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
-	cpus_addr(phys_cpu_present_map)[0] |=
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
-				       2) << 16;
-	cpus_addr(phys_cpu_present_map)[0] |=
-	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
-				       3) << 24;
-	init_cpu_possible(&phys_cpu_present_map);
-	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
-	       cpus_addr(phys_cpu_present_map)[0]);
-	/* Here we set up the VIC to enable SMP */
-	/* enable the CPIs by writing the base vector to their register */
-	outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
-	outb(1, VIC_REDIRECT_REGISTER_1);
-	/* set the claim registers for static routing --- Boot CPU gets
-	 * all interrupts untill all other CPUs started */
-	outb(0xff, VIC_CLAIM_REGISTER_0);
-	outb(0xff, VIC_CLAIM_REGISTER_1);
-	/* Set the Primary and Secondary Microchannel vector
-	 * bases to be the same as the ordinary interrupts
-	 *
-	 * FIXME: This would be more efficient using separate
-	 * vectors. */
-	outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE);
-	outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE);
-
-	/* Finally tell the firmware that we're driving */
-	outb(inb(VOYAGER_SUS_IN_CONTROL_PORT) | VOYAGER_IN_CONTROL_FLAG,
-	     VOYAGER_SUS_IN_CONTROL_PORT);
-
-	current_thread_info()->cpu = boot_cpu_id;
-	percpu_write(cpu_number, boot_cpu_id);
-}
-
-/*
- *	The bootstrap kernel entry code has set these up. Save them
- *	for a given CPU, id is physical */
-void __init smp_store_cpu_info(int id)
-{
-	struct cpuinfo_x86 *c = &cpu_data(id);
-
-	*c = boot_cpu_data;
-	c->cpu_index = id;
-
-	identify_secondary_cpu(c);
-}
-
-/* Routine initially called when a non-boot CPU is brought online */
-static void __init start_secondary(void *unused)
-{
-	__u8 cpuid = hard_smp_processor_id();
-
-	cpu_init();
-
-	/* OK, we're in the routine */
-	ack_CPI(VIC_CPU_BOOT_CPI);
-
-	/* setup the 8259 master slave pair belonging to this CPU ---
-	 * we won't actually receive any until the boot CPU
-	 * relinquishes it's static routing mask */
-	vic_setup_pic();
-
-	qic_setup();
-
-	if (is_cpu_quad() && !is_cpu_vic_boot()) {
-		/* clear the boot CPI */
-		__u8 dummy;
-
-		dummy =
-		    voyager_quad_cpi_addr[cpuid]->qic_cpi[VIC_CPU_BOOT_CPI].cpi;
-		printk("read dummy %d\n", dummy);
-	}
-
-	/* lower the mask to receive CPIs */
-	vic_enable_cpi();
-
-	VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid, &cpuid));
-
-	notify_cpu_starting(cpuid);
-
-	/* enable interrupts */
-	local_irq_enable();
-
-	/* get our bogomips */
-	calibrate_delay();
-
-	/* save our processor parameters */
-	smp_store_cpu_info(cpuid);
-
-	/* if we're a quad, we may need to bootstrap other CPUs */
-	do_quad_bootstrap();
-
-	/* FIXME: this is rather a poor hack to prevent the CPU
-	 * activating softirqs while it's supposed to be waiting for
-	 * permission to proceed.  Without this, the new per CPU stuff
-	 * in the softirqs will fail */
-	local_irq_disable();
-	cpu_set(cpuid, cpu_callin_map);
-
-	/* signal that we're done */
-	cpu_booted_map = 1;
-
-	while (!cpu_isset(cpuid, smp_commenced_mask))
-		rep_nop();
-	local_irq_enable();
-
-	local_flush_tlb();
-
-	cpu_set(cpuid, cpu_online_map);
-	wmb();
-	cpu_idle();
-}
-
-/* Routine to kick start the given CPU and wait for it to report ready
- * (or timeout in startup).  When this routine returns, the requested
- * CPU is either fully running and configured or known to be dead.
- *
- * We call this routine sequentially 1 CPU at a time, so no need for
- * locking */
-
-static void __init do_boot_cpu(__u8 cpu)
-{
-	struct task_struct *idle;
-	int timeout;
-	unsigned long flags;
-	int quad_boot = (1 << cpu) & voyager_quad_processors
-	    & ~(voyager_extended_vic_processors
-		& voyager_allowed_boot_processors);
-
-	/* This is the format of the CPI IDT gate (in real mode) which
-	 * we're hijacking to boot the CPU */
-	union IDTFormat {
-		struct seg {
-			__u16 Offset;
-			__u16 Segment;
-		} idt;
-		__u32 val;
-	} hijack_source;
-
-	__u32 *hijack_vector;
-	__u32 start_phys_address = setup_trampoline();
-
-	/* There's a clever trick to this: The linux trampoline is
-	 * compiled to begin at absolute location zero, so make the
-	 * address zero but have the data segment selector compensate
-	 * for the actual address */
-	hijack_source.idt.Offset = start_phys_address & 0x000F;
-	hijack_source.idt.Segment = (start_phys_address >> 4) & 0xFFFF;
-
-	cpucount++;
-	alternatives_smp_switch(1);
-
-	idle = fork_idle(cpu);
-	if (IS_ERR(idle))
-		panic("failed fork for CPU%d", cpu);
-	idle->thread.ip = (unsigned long)start_secondary;
-	/* init_tasks (in sched.c) is indexed logically */
-	stack_start.sp = (void *)idle->thread.sp;
-
-	per_cpu(current_task, cpu) = idle;
-	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
-	irq_ctx_init(cpu);
-
-	/* Note: Don't modify initial ss override */
-	VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu,
-		(unsigned long)hijack_source.val, hijack_source.idt.Segment,
-		hijack_source.idt.Offset, stack_start.sp));
-
-	/* init lowmem identity mapping */
-	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-			min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-	flush_tlb_all();
-
-	if (quad_boot) {
-		printk("CPU %d: non extended Quad boot\n", cpu);
-		hijack_vector =
-		    (__u32 *)
-		    phys_to_virt((VIC_CPU_BOOT_CPI + QIC_DEFAULT_CPI_BASE) * 4);
-		*hijack_vector = hijack_source.val;
-	} else {
-		printk("CPU%d: extended VIC boot\n", cpu);
-		hijack_vector =
-		    (__u32 *)
-		    phys_to_virt((VIC_CPU_BOOT_CPI + VIC_DEFAULT_CPI_BASE) * 4);
-		*hijack_vector = hijack_source.val;
-		/* VIC errata, may also receive interrupt at this address */
-		hijack_vector =
-		    (__u32 *)
-		    phys_to_virt((VIC_CPU_BOOT_ERRATA_CPI +
-				  VIC_DEFAULT_CPI_BASE) * 4);
-		*hijack_vector = hijack_source.val;
-	}
-	/* All non-boot CPUs start with interrupts fully masked.  Need
-	 * to lower the mask of the CPI we're about to send.  We do
-	 * this in the VIC by masquerading as the processor we're
-	 * about to boot and lowering its interrupt mask */
-	local_irq_save(flags);
-	if (quad_boot) {
-		send_one_QIC_CPI(cpu, VIC_CPU_BOOT_CPI);
-	} else {
-		outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID);
-		/* here we're altering registers belonging to `cpu' */
-
-		outb(VIC_BOOT_INTERRUPT_MASK, 0x21);
-		/* now go back to our original identity */
-		outb(boot_cpu_id, VIC_PROCESSOR_ID);
-
-		/* and boot the CPU */
-
-		send_CPI((1 << cpu), VIC_CPU_BOOT_CPI);
-	}
-	cpu_booted_map = 0;
-	local_irq_restore(flags);
-
-	/* now wait for it to become ready (or timeout) */
-	for (timeout = 0; timeout < 50000; timeout++) {
-		if (cpu_booted_map)
-			break;
-		udelay(100);
-	}
-	/* reset the page table */
-	zap_low_mappings();
-
-	if (cpu_booted_map) {
-		VDEBUG(("CPU%d: Booted successfully, back in CPU %d\n",
-			cpu, smp_processor_id()));
-
-		printk("CPU%d: ", cpu);
-		print_cpu_info(&cpu_data(cpu));
-		wmb();
-		cpu_set(cpu, cpu_callout_map);
-		cpu_set(cpu, cpu_present_map);
-	} else {
-		printk("CPU%d FAILED TO BOOT: ", cpu);
-		if (*
-		    ((volatile unsigned char *)phys_to_virt(start_phys_address))
-		    == 0xA5)
-			printk("Stuck.\n");
-		else
-			printk("Not responding.\n");
-
-		cpucount--;
-	}
-}
-
-void __init smp_boot_cpus(void)
-{
-	int i;
-
-	/* CAT BUS initialisation must be done after the memory */
-	/* FIXME: The L4 has a catbus too, it just needs to be
-	 * accessed in a totally different way */
-	if (voyager_level == 5) {
-		voyager_cat_init();
-
-		/* now that the cat has probed the Voyager System Bus, sanity
-		 * check the cpu map */
-		if (((voyager_quad_processors | voyager_extended_vic_processors)
-		     & cpus_addr(phys_cpu_present_map)[0]) !=
-		    cpus_addr(phys_cpu_present_map)[0]) {
-			/* should panic */
-			printk("\n\n***WARNING*** "
-			       "Sanity check of CPU present map FAILED\n");
-		}
-	} else if (voyager_level == 4)
-		voyager_extended_vic_processors =
-		    cpus_addr(phys_cpu_present_map)[0];
-
-	/* this sets up the idle task to run on the current cpu */
-	voyager_extended_cpus = 1;
-	/* Remove the global_irq_holder setting, it triggers a BUG() on
-	 * schedule at the moment */
-	//global_irq_holder = boot_cpu_id;
-
-	/* FIXME: Need to do something about this but currently only works
-	 * on CPUs with a tsc which none of mine have.
-	 smp_tune_scheduling();
-	 */
-	smp_store_cpu_info(boot_cpu_id);
-	/* setup the jump vector */
-	initial_code = (unsigned long)initialize_secondary;
-	printk("CPU%d: ", boot_cpu_id);
-	print_cpu_info(&cpu_data(boot_cpu_id));
-
-	if (is_cpu_quad()) {
-		/* booting on a Quad CPU */
-		printk("VOYAGER SMP: Boot CPU is Quad\n");
-		qic_setup();
-		do_quad_bootstrap();
-	}
-
-	/* enable our own CPIs */
-	vic_enable_cpi();
-
-	cpu_set(boot_cpu_id, cpu_online_map);
-	cpu_set(boot_cpu_id, cpu_callout_map);
-
-	/* loop over all the extended VIC CPUs and boot them.  The
-	 * Quad CPUs must be bootstrapped by their extended VIC cpu */
-	for (i = 0; i < nr_cpu_ids; i++) {
-		if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
-			continue;
-		do_boot_cpu(i);
-		/* This udelay seems to be needed for the Quad boots
-		 * don't remove unless you know what you're doing */
-		udelay(1000);
-	}
-	/* we could compute the total bogomips here, but why bother?,
-	 * Code added from smpboot.c */
-	{
-		unsigned long bogosum = 0;
-
-		for_each_online_cpu(i)
-			bogosum += cpu_data(i).loops_per_jiffy;
-		printk(KERN_INFO "Total of %d processors activated "
-		       "(%lu.%02lu BogoMIPS).\n",
-		       cpucount + 1, bogosum / (500000 / HZ),
-		       (bogosum / (5000 / HZ)) % 100);
-	}
-	voyager_extended_cpus = hweight32(voyager_extended_vic_processors);
-	printk("VOYAGER: Extended (interrupt handling CPUs): "
-	       "%d, non-extended: %d\n", voyager_extended_cpus,
-	       num_booting_cpus() - voyager_extended_cpus);
-	/* that's it, switch to symmetric mode */
-	outb(0, VIC_PRIORITY_REGISTER);
-	outb(0, VIC_CLAIM_REGISTER_0);
-	outb(0, VIC_CLAIM_REGISTER_1);
-
-	VDEBUG(("VOYAGER SMP: Booted with %d CPUs\n", num_booting_cpus()));
-}
-
-/* Reload the secondary CPUs task structure (this function does not
- * return ) */
-static void __init initialize_secondary(void)
-{
-#if 0
-	// AC kernels only
-	set_current(hard_get_current());
-#endif
-
-	/*
-	 * We don't actually need to load the full TSS,
-	 * basically just the stack pointer and the eip.
-	 */
-
-	asm volatile ("movl %0,%%esp\n\t"
-		      "jmp *%1"::"r" (current->thread.sp),
-		      "r"(current->thread.ip));
-}
-
-/* handle a Voyager SYS_INT -- If we don't, the base board will
- * panic the system.
- *
- * System interrupts occur because some problem was detected on the
- * various busses.  To find out what you have to probe all the
- * hardware via the CAT bus.  FIXME: At the moment we do nothing. */
-void smp_vic_sys_interrupt(struct pt_regs *regs)
-{
-	ack_CPI(VIC_SYS_INT);
-	printk("Voyager SYSTEM INTERRUPT\n");
-}
-
-/* Handle a voyager CMN_INT; These interrupts occur either because of
- * a system status change or because a single bit memory error
- * occurred.  FIXME: At the moment, ignore all this. */
-void smp_vic_cmn_interrupt(struct pt_regs *regs)
-{
-	static __u8 in_cmn_int = 0;
-	static DEFINE_SPINLOCK(cmn_int_lock);
-
-	/* common ints are broadcast, so make sure we only do this once */
-	_raw_spin_lock(&cmn_int_lock);
-	if (in_cmn_int)
-		goto unlock_end;
-
-	in_cmn_int++;
-	_raw_spin_unlock(&cmn_int_lock);
-
-	VDEBUG(("Voyager COMMON INTERRUPT\n"));
-
-	if (voyager_level == 5)
-		voyager_cat_do_common_interrupt();
-
-	_raw_spin_lock(&cmn_int_lock);
-	in_cmn_int = 0;
-      unlock_end:
-	_raw_spin_unlock(&cmn_int_lock);
-	ack_CPI(VIC_CMN_INT);
-}
-
-/*
- * Reschedule call back. Nothing to do, all the work is done
- * automatically when we return from the interrupt.  */
-static void smp_reschedule_interrupt(void)
-{
-	/* do nothing */
-}
-
-static struct mm_struct *flush_mm;
-static unsigned long flush_va;
-static DEFINE_SPINLOCK(tlbstate_lock);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- *
- * We need to reload %cr3 since the page tables may be going
- * away from under us..
- */
-static inline void voyager_leave_mm(unsigned long cpu)
-{
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
-		BUG();
-	cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-
-/*
- * Invalidate call-back
- */
-static void smp_invalidate_interrupt(void)
-{
-	__u8 cpu = smp_processor_id();
-
-	if (!test_bit(cpu, &smp_invalidate_needed))
-		return;
-	/* This will flood messages.  Don't uncomment unless you see
-	 * Problems with cross cpu invalidation
-	 VDEBUG(("VOYAGER SMP: CPU%d received INVALIDATE_CPI\n",
-	 smp_processor_id()));
-	 */
-
-	if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
-		if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
-			if (flush_va == TLB_FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(flush_va);
-		} else
-			voyager_leave_mm(cpu);
-	}
-	smp_mb__before_clear_bit();
-	clear_bit(cpu, &smp_invalidate_needed);
-	smp_mb__after_clear_bit();
-}
-
-/* All the new flush operations for 2.4 */
-
-/* This routine is called with a physical cpu mask */
-static void
-voyager_flush_tlb_others(unsigned long cpumask, struct mm_struct *mm,
-			 unsigned long va)
-{
-	int stuck = 50000;
-
-	if (!cpumask)
-		BUG();
-	if ((cpumask & cpus_addr(cpu_online_map)[0]) != cpumask)
-		BUG();
-	if (cpumask & (1 << smp_processor_id()))
-		BUG();
-	if (!mm)
-		BUG();
-
-	spin_lock(&tlbstate_lock);
-
-	flush_mm = mm;
-	flush_va = va;
-	atomic_set_mask(cpumask, &smp_invalidate_needed);
-	/*
-	 * We have to send the CPI only to
-	 * CPUs affected.
-	 */
-	send_CPI(cpumask, VIC_INVALIDATE_CPI);
-
-	while (smp_invalidate_needed) {
-		mb();
-		if (--stuck == 0) {
-			printk("***WARNING*** Stuck doing invalidate CPI "
-			       "(CPU%d)\n", smp_processor_id());
-			break;
-		}
-	}
-
-	/* Uncomment only to debug invalidation problems
-	   VDEBUG(("VOYAGER SMP: Completed invalidate CPI (CPU%d)\n", cpu));
-	 */
-
-	flush_mm = NULL;
-	flush_va = 0;
-	spin_unlock(&tlbstate_lock);
-}
-
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long cpu_mask;
-
-	preempt_disable();
-
-	cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
-	local_flush_tlb();
-	if (cpu_mask)
-		voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	unsigned long cpu_mask;
-
-	preempt_disable();
-
-	cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			voyager_leave_mm(smp_processor_id());
-	}
-	if (cpu_mask)
-		voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	unsigned long cpu_mask;
-
-	preempt_disable();
-
-	cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
-	if (current->active_mm == mm) {
-		if (current->mm)
-			__flush_tlb_one(va);
-		else
-			voyager_leave_mm(smp_processor_id());
-	}
-
-	if (cpu_mask)
-		voyager_flush_tlb_others(cpu_mask, mm, va);
-
-	preempt_enable();
-}
-
-EXPORT_SYMBOL(flush_tlb_page);
-
-/* enable the requested IRQs */
-static void smp_enable_irq_interrupt(void)
-{
-	__u8 irq;
-	__u8 cpu = get_cpu();
-
-	VDEBUG(("VOYAGER SMP: CPU%d enabling irq mask 0x%x\n", cpu,
-		vic_irq_enable_mask[cpu]));
-
-	spin_lock(&vic_irq_lock);
-	for (irq = 0; irq < 16; irq++) {
-		if (vic_irq_enable_mask[cpu] & (1 << irq))
-			enable_local_vic_irq(irq);
-	}
-	vic_irq_enable_mask[cpu] = 0;
-	spin_unlock(&vic_irq_lock);
-
-	put_cpu_no_resched();
-}
-
-/*
- *	CPU halt call-back
- */
-static void smp_stop_cpu_function(void *dummy)
-{
-	VDEBUG(("VOYAGER SMP: CPU%d is STOPPING\n", smp_processor_id()));
-	cpu_clear(smp_processor_id(), cpu_online_map);
-	local_irq_disable();
-	for (;;)
-		halt();
-}
-
-/* execute a thread on a new CPU.  The function to be called must be
- * previously set up.  This is used to schedule a function for
- * execution on all CPUs - set up the function then broadcast a
- * function_interrupt CPI to come here on each CPU */
-static void smp_call_function_interrupt(void)
-{
-	irq_enter();
-	generic_smp_call_function_interrupt();
-	__get_cpu_var(irq_stat).irq_call_count++;
-	irq_exit();
-}
-
-static void smp_call_function_single_interrupt(void)
-{
-	irq_enter();
-	generic_smp_call_function_single_interrupt();
-	__get_cpu_var(irq_stat).irq_call_count++;
-	irq_exit();
-}
-
-/* Sorry about the name.  In an APIC based system, the APICs
- * themselves are programmed to send a timer interrupt.  This is used
- * by linux to reschedule the processor.  Voyager doesn't have this,
- * so we use the system clock to interrupt one processor, which in
- * turn, broadcasts a timer CPI to all the others --- we receive that
- * CPI here.  We don't use this actually for counting so losing
- * ticks doesn't matter
- *
- * FIXME: For those CPUs which actually have a local APIC, we could
- * try to use it to trigger this interrupt instead of having to
- * broadcast the timer tick.  Unfortunately, all my pentium DYADs have
- * no local APIC, so I can't do this
- *
- * This function is currently a placeholder and is unused in the code */
-void smp_apic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	wrapper_smp_local_timer_interrupt();
-	set_irq_regs(old_regs);
-}
-
-/* All of the QUAD interrupt GATES */
-void smp_qic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	ack_QIC_CPI(QIC_TIMER_CPI);
-	wrapper_smp_local_timer_interrupt();
-	set_irq_regs(old_regs);
-}
-
-void smp_qic_invalidate_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_INVALIDATE_CPI);
-	smp_invalidate_interrupt();
-}
-
-void smp_qic_reschedule_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_RESCHEDULE_CPI);
-	smp_reschedule_interrupt();
-}
-
-void smp_qic_enable_irq_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_ENABLE_IRQ_CPI);
-	smp_enable_irq_interrupt();
-}
-
-void smp_qic_call_function_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_CALL_FUNCTION_CPI);
-	smp_call_function_interrupt();
-}
-
-void smp_qic_call_function_single_interrupt(struct pt_regs *regs)
-{
-	ack_QIC_CPI(QIC_CALL_FUNCTION_SINGLE_CPI);
-	smp_call_function_single_interrupt();
-}
-
-void smp_vic_cpi_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	__u8 cpu = smp_processor_id();
-
-	if (is_cpu_quad())
-		ack_QIC_CPI(VIC_CPI_LEVEL0);
-	else
-		ack_VIC_CPI(VIC_CPI_LEVEL0);
-
-	if (test_and_clear_bit(VIC_TIMER_CPI, &vic_cpi_mailbox[cpu]))
-		wrapper_smp_local_timer_interrupt();
-	if (test_and_clear_bit(VIC_INVALIDATE_CPI, &vic_cpi_mailbox[cpu]))
-		smp_invalidate_interrupt();
-	if (test_and_clear_bit(VIC_RESCHEDULE_CPI, &vic_cpi_mailbox[cpu]))
-		smp_reschedule_interrupt();
-	if (test_and_clear_bit(VIC_ENABLE_IRQ_CPI, &vic_cpi_mailbox[cpu]))
-		smp_enable_irq_interrupt();
-	if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu]))
-		smp_call_function_interrupt();
-	if (test_and_clear_bit(VIC_CALL_FUNCTION_SINGLE_CPI, &vic_cpi_mailbox[cpu]))
-		smp_call_function_single_interrupt();
-	set_irq_regs(old_regs);
-}
-
-static void do_flush_tlb_all(void *info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
-		voyager_leave_mm(cpu);
-}
-
-/* flush the TLB of every active CPU in the system */
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, 0, 1);
-}
-
-/* send a reschedule CPI to one CPU by physical CPU number*/
-static void voyager_smp_send_reschedule(int cpu)
-{
-	send_one_CPI(cpu, VIC_RESCHEDULE_CPI);
-}
-
-int hard_smp_processor_id(void)
-{
-	__u8 i;
-	__u8 cpumask = inb(VIC_PROC_WHO_AM_I);
-	if ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER)
-		return cpumask & 0x1F;
-
-	for (i = 0; i < 8; i++) {
-		if (cpumask & (1 << i))
-			return i;
-	}
-	printk("** WARNING ** Illegal cpuid returned by VIC: %d", cpumask);
-	return 0;
-}
-
-int safe_smp_processor_id(void)
-{
-	return hard_smp_processor_id();
-}
-
-/* broadcast a halt to all other CPUs */
-static void voyager_smp_send_stop(void)
-{
-	smp_call_function(smp_stop_cpu_function, NULL, 1);
-}
-
-/* this function is triggered in time.c when a clock tick fires
- * we need to re-broadcast the tick to all CPUs */
-void smp_vic_timer_interrupt(void)
-{
-	send_CPI_allbutself(VIC_TIMER_CPI);
-	smp_local_timer_interrupt();
-}
-
-/* local (per CPU) timer interrupt.  It does both profiling and
- * process statistics/rescheduling.
- *
- * We do profiling in every local tick, statistics/rescheduling
- * happen only every 'profiling multiplier' ticks. The default
- * multiplier is 1 and it can be changed by writing the new multiplier
- * value into /proc/profile.
- */
-void smp_local_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	long weight;
-
-	profile_tick(CPU_PROFILING);
-	if (--per_cpu(prof_counter, cpu) <= 0) {
-		/*
-		 * The multiplier may have changed since the last time we got
-		 * to this point as a result of the user writing to
-		 * /proc/profile. In this case we need to adjust the APIC
-		 * timer accordingly.
-		 *
-		 * Interrupts are already masked off at this point.
-		 */
-		per_cpu(prof_counter, cpu) = per_cpu(prof_multiplier, cpu);
-		if (per_cpu(prof_counter, cpu) !=
-		    per_cpu(prof_old_multiplier, cpu)) {
-			/* FIXME: need to update the vic timer tick here */
-			per_cpu(prof_old_multiplier, cpu) =
-			    per_cpu(prof_counter, cpu);
-		}
-
-		update_process_times(user_mode_vm(get_irq_regs()));
-	}
-
-	if (((1 << cpu) & voyager_extended_vic_processors) == 0)
-		/* only extended VIC processors participate in
-		 * interrupt distribution */
-		return;
-
-	/*
-	 * We take the 'long' return path, and there every subsystem
-	 * grabs the appropriate locks (kernel lock/ irq lock).
-	 *
-	 * we might want to decouple profiling from the 'long path',
-	 * and do the profiling totally in assembly.
-	 *
-	 * Currently this isn't too much of an issue (performance wise),
-	 * we can take more than 100K local irqs per second on a 100 MHz P5.
-	 */
-
-	if ((++vic_tick[cpu] & 0x7) != 0)
-		return;
-	/* get here every 16 ticks (about every 1/6 of a second) */
-
-	/* Change our priority to give someone else a chance at getting
-	 * the IRQ. The algorithm goes like this:
-	 *
-	 * In the VIC, the dynamically routed interrupt is always
-	 * handled by the lowest priority eligible (i.e. receiving
-	 * interrupts) CPU.  If >1 eligible CPUs are equal lowest, the
-	 * lowest processor number gets it.
-	 *
-	 * The priority of a CPU is controlled by a special per-CPU
-	 * VIC priority register which is 3 bits wide 0 being lowest
-	 * and 7 highest priority..
-	 *
-	 * Therefore we subtract the average number of interrupts from
-	 * the number we've fielded.  If this number is negative, we
-	 * lower the activity count and if it is positive, we raise
-	 * it.
-	 *
-	 * I'm afraid this still leads to odd looking interrupt counts:
-	 * the totals are all roughly equal, but the individual ones
-	 * look rather skewed.
-	 *
-	 * FIXME: This algorithm is total crap when mixed with SMP
-	 * affinity code since we now try to even up the interrupt
-	 * counts when an affinity binding is keeping them on a
-	 * particular CPU*/
-	weight = (vic_intr_count[cpu] * voyager_extended_cpus
-		  - vic_intr_total) >> 4;
-	weight += 4;
-	if (weight > 7)
-		weight = 7;
-	if (weight < 0)
-		weight = 0;
-
-	outb((__u8) weight, VIC_PRIORITY_REGISTER);
-
-#ifdef VOYAGER_DEBUG
-	if ((vic_tick[cpu] & 0xFFF) == 0) {
-		/* print this message roughly every 25 secs */
-		printk("VOYAGER SMP: vic_tick[%d] = %lu, weight = %ld\n",
-		       cpu, vic_tick[cpu], weight);
-	}
-#endif
-}
-
-/* setup the profiling timer */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	int i;
-
-	if ((!multiplier))
-		return -EINVAL;
-
-	/*
-	 * Set the new multiplier for each CPU. CPUs don't start using the
-	 * new values until the next timer interrupt in which they do process
-	 * accounting.
-	 */
-	for (i = 0; i < nr_cpu_ids; ++i)
-		per_cpu(prof_multiplier, i) = multiplier;
-
-	return 0;
-}
-
-/* This is a bit of a mess, but forced on us by the genirq changes
- * there's no genirq handler that really does what voyager wants
- * so hack it up with the simple IRQ handler */
-static void handle_vic_irq(unsigned int irq, struct irq_desc *desc)
-{
-	before_handle_vic_irq(irq);
-	handle_simple_irq(irq, desc);
-	after_handle_vic_irq(irq);
-}
-
-/*  The CPIs are handled in the per cpu 8259s, so they must be
- *  enabled to be received: FIX: enabling the CPIs in the early
- *  boot sequence interferes with bug checking; enable them later
- *  on in smp_init */
-#define VIC_SET_GATE(cpi, vector) \
-	set_intr_gate((cpi) + VIC_DEFAULT_CPI_BASE, (vector))
-#define QIC_SET_GATE(cpi, vector) \
-	set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector))
-
-void __init voyager_smp_intr_init(void)
-{
-	int i;
-
-	/* initialize the per cpu irq mask to all disabled */
-	for (i = 0; i < nr_cpu_ids; i++)
-		vic_irq_mask[i] = 0xFFFF;
-
-	VIC_SET_GATE(VIC_CPI_LEVEL0, vic_cpi_interrupt);
-
-	VIC_SET_GATE(VIC_SYS_INT, vic_sys_interrupt);
-	VIC_SET_GATE(VIC_CMN_INT, vic_cmn_interrupt);
-
-	QIC_SET_GATE(QIC_TIMER_CPI, qic_timer_interrupt);
-	QIC_SET_GATE(QIC_INVALIDATE_CPI, qic_invalidate_interrupt);
-	QIC_SET_GATE(QIC_RESCHEDULE_CPI, qic_reschedule_interrupt);
-	QIC_SET_GATE(QIC_ENABLE_IRQ_CPI, qic_enable_irq_interrupt);
-	QIC_SET_GATE(QIC_CALL_FUNCTION_CPI, qic_call_function_interrupt);
-
-	/* now put the VIC descriptor into the first 48 IRQs
-	 *
-	 * This is for later: first 16 correspond to PC IRQs; next 16
-	 * are Primary MC IRQs and final 16 are Secondary MC IRQs */
-	for (i = 0; i < 48; i++)
-		set_irq_chip_and_handler(i, &vic_chip, handle_vic_irq);
-}
-
-/* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per
- * processor to receive CPI */
-static void send_CPI(__u32 cpuset, __u8 cpi)
-{
-	int cpu;
-	__u32 quad_cpuset = (cpuset & voyager_quad_processors);
-
-	if (cpi < VIC_START_FAKE_CPI) {
-		/* fake CPI are only used for booting, so send to the
-		 * extended quads as well---Quads must be VIC booted */
-		outb((__u8) (cpuset), VIC_CPI_Registers[cpi]);
-		return;
-	}
-	if (quad_cpuset)
-		send_QIC_CPI(quad_cpuset, cpi);
-	cpuset &= ~quad_cpuset;
-	cpuset &= 0xff;		/* only first 8 CPUs vaild for VIC CPI */
-	if (cpuset == 0)
-		return;
-	for_each_online_cpu(cpu) {
-		if (cpuset & (1 << cpu))
-			set_bit(cpi, &vic_cpi_mailbox[cpu]);
-	}
-	if (cpuset)
-		outb((__u8) cpuset, VIC_CPI_Registers[VIC_CPI_LEVEL0]);
-}
-
-/* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and
- * set the cache line to shared by reading it.
- *
- * DON'T make this inline otherwise the cache line read will be
- * optimised away
- * */
-static int ack_QIC_CPI(__u8 cpi)
-{
-	__u8 cpu = hard_smp_processor_id();
-
-	cpi &= 7;
-
-	outb(1 << cpi, QIC_INTERRUPT_CLEAR1);
-	return voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi;
-}
-
-static void ack_special_QIC_CPI(__u8 cpi)
-{
-	switch (cpi) {
-	case VIC_CMN_INT:
-		outb(QIC_CMN_INT, QIC_INTERRUPT_CLEAR0);
-		break;
-	case VIC_SYS_INT:
-		outb(QIC_SYS_INT, QIC_INTERRUPT_CLEAR0);
-		break;
-	}
-	/* also clear at the VIC, just in case (nop for non-extended proc) */
-	ack_VIC_CPI(cpi);
-}
-
-/* Acknowledge receipt of CPI in the VIC (essentially an EOI) */
-static void ack_VIC_CPI(__u8 cpi)
-{
-#ifdef VOYAGER_DEBUG
-	unsigned long flags;
-	__u16 isr;
-	__u8 cpu = smp_processor_id();
-
-	local_irq_save(flags);
-	isr = vic_read_isr();
-	if ((isr & (1 << (cpi & 7))) == 0) {
-		printk("VOYAGER SMP: CPU%d lost CPI%d\n", cpu, cpi);
-	}
-#endif
-	/* send specific EOI; the two system interrupts have
-	 * bit 4 set for a separate vector but behave as the
-	 * corresponding 3 bit intr */
-	outb_p(0x60 | (cpi & 7), 0x20);
-
-#ifdef VOYAGER_DEBUG
-	if ((vic_read_isr() & (1 << (cpi & 7))) != 0) {
-		printk("VOYAGER SMP: CPU%d still asserting CPI%d\n", cpu, cpi);
-	}
-	local_irq_restore(flags);
-#endif
-}
-
-/* cribbed with thanks from irq.c */
-#define __byte(x,y)	(((unsigned char *)&(y))[x])
-#define cached_21(cpu)	(__byte(0,vic_irq_mask[cpu]))
-#define cached_A1(cpu)	(__byte(1,vic_irq_mask[cpu]))
-
-static unsigned int startup_vic_irq(unsigned int irq)
-{
-	unmask_vic_irq(irq);
-
-	return 0;
-}
-
-/* The enable and disable routines.  This is where we run into
- * conflicting architectural philosophy.  Fundamentally, the voyager
- * architecture does not expect to have to disable interrupts globally
- * (the IRQ controllers belong to each CPU).  The processor masquerade
- * which is used to start the system shouldn't be used in a running OS
- * since it will cause great confusion if two separate CPUs drive to
- * the same IRQ controller (I know, I've tried it).
- *
- * The solution is a variant on the NCR lazy SPL design:
- *
- * 1) To disable an interrupt, do nothing (other than set the
- *    IRQ_DISABLED flag).  This dares the interrupt actually to arrive.
- *
- * 2) If the interrupt dares to come in, raise the local mask against
- *    it (this will result in all the CPU masks being raised
- *    eventually).
- *
- * 3) To enable the interrupt, lower the mask on the local CPU and
- *    broadcast an Interrupt enable CPI which causes all other CPUs to
- *    adjust their masks accordingly.  */
-
-static void unmask_vic_irq(unsigned int irq)
-{
-	/* linux doesn't to processor-irq affinity, so enable on
-	 * all CPUs we know about */
-	int cpu = smp_processor_id(), real_cpu;
-	__u16 mask = (1 << irq);
-	__u32 processorList = 0;
-	unsigned long flags;
-
-	VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n",
-		irq, cpu, cpu_irq_affinity[cpu]));
-	spin_lock_irqsave(&vic_irq_lock, flags);
-	for_each_online_cpu(real_cpu) {
-		if (!(voyager_extended_vic_processors & (1 << real_cpu)))
-			continue;
-		if (!(cpu_irq_affinity[real_cpu] & mask)) {
-			/* irq has no affinity for this CPU, ignore */
-			continue;
-		}
-		if (real_cpu == cpu) {
-			enable_local_vic_irq(irq);
-		} else if (vic_irq_mask[real_cpu] & mask) {
-			vic_irq_enable_mask[real_cpu] |= mask;
-			processorList |= (1 << real_cpu);
-		}
-	}
-	spin_unlock_irqrestore(&vic_irq_lock, flags);
-	if (processorList)
-		send_CPI(processorList, VIC_ENABLE_IRQ_CPI);
-}
-
-static void mask_vic_irq(unsigned int irq)
-{
-	/* lazy disable, do nothing */
-}
-
-static void enable_local_vic_irq(unsigned int irq)
-{
-	__u8 cpu = smp_processor_id();
-	__u16 mask = ~(1 << irq);
-	__u16 old_mask = vic_irq_mask[cpu];
-
-	vic_irq_mask[cpu] &= mask;
-	if (vic_irq_mask[cpu] == old_mask)
-		return;
-
-	VDEBUG(("VOYAGER DEBUG: Enabling irq %d in hardware on CPU %d\n",
-		irq, cpu));
-
-	if (irq & 8) {
-		outb_p(cached_A1(cpu), 0xA1);
-		(void)inb_p(0xA1);
-	} else {
-		outb_p(cached_21(cpu), 0x21);
-		(void)inb_p(0x21);
-	}
-}
-
-static void disable_local_vic_irq(unsigned int irq)
-{
-	__u8 cpu = smp_processor_id();
-	__u16 mask = (1 << irq);
-	__u16 old_mask = vic_irq_mask[cpu];
-
-	if (irq == 7)
-		return;
-
-	vic_irq_mask[cpu] |= mask;
-	if (old_mask == vic_irq_mask[cpu])
-		return;
-
-	VDEBUG(("VOYAGER DEBUG: Disabling irq %d in hardware on CPU %d\n",
-		irq, cpu));
-
-	if (irq & 8) {
-		outb_p(cached_A1(cpu), 0xA1);
-		(void)inb_p(0xA1);
-	} else {
-		outb_p(cached_21(cpu), 0x21);
-		(void)inb_p(0x21);
-	}
-}
-
-/* The VIC is level triggered, so the ack can only be issued after the
- * interrupt completes.  However, we do Voyager lazy interrupt
- * handling here: It is an extremely expensive operation to mask an
- * interrupt in the vic, so we merely set a flag (IRQ_DISABLED).  If
- * this interrupt actually comes in, then we mask and ack here to push
- * the interrupt off to another CPU */
-static void before_handle_vic_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_to_desc(irq);
-	__u8 cpu = smp_processor_id();
-
-	_raw_spin_lock(&vic_irq_lock);
-	vic_intr_total++;
-	vic_intr_count[cpu]++;
-
-	if (!(cpu_irq_affinity[cpu] & (1 << irq))) {
-		/* The irq is not in our affinity mask, push it off
-		 * onto another CPU */
-		VDEBUG(("VOYAGER DEBUG: affinity triggered disable of irq %d "
-			"on cpu %d\n", irq, cpu));
-		disable_local_vic_irq(irq);
-		/* set IRQ_INPROGRESS to prevent the handler in irq.c from
-		 * actually calling the interrupt routine */
-		desc->status |= IRQ_REPLAY | IRQ_INPROGRESS;
-	} else if (desc->status & IRQ_DISABLED) {
-		/* Damn, the interrupt actually arrived, do the lazy
-		 * disable thing. The interrupt routine in irq.c will
-		 * not handle a IRQ_DISABLED interrupt, so nothing more
-		 * need be done here */
-		VDEBUG(("VOYAGER DEBUG: lazy disable of irq %d on CPU %d\n",
-			irq, cpu));
-		disable_local_vic_irq(irq);
-		desc->status |= IRQ_REPLAY;
-	} else {
-		desc->status &= ~IRQ_REPLAY;
-	}
-
-	_raw_spin_unlock(&vic_irq_lock);
-}
-
-/* Finish the VIC interrupt: basically mask */
-static void after_handle_vic_irq(unsigned int irq)
-{
-	irq_desc_t *desc = irq_to_desc(irq);
-
-	_raw_spin_lock(&vic_irq_lock);
-	{
-		unsigned int status = desc->status & ~IRQ_INPROGRESS;
-#ifdef VOYAGER_DEBUG
-		__u16 isr;
-#endif
-
-		desc->status = status;
-		if ((status & IRQ_DISABLED))
-			disable_local_vic_irq(irq);
-#ifdef VOYAGER_DEBUG
-		/* DEBUG: before we ack, check what's in progress */
-		isr = vic_read_isr();
-		if ((isr & (1 << irq) && !(status & IRQ_REPLAY)) == 0) {
-			int i;
-			__u8 cpu = smp_processor_id();
-			__u8 real_cpu;
-			int mask;	/* Um... initialize me??? --RR */
-
-			printk("VOYAGER SMP: CPU%d lost interrupt %d\n",
-			       cpu, irq);
-			for_each_possible_cpu(real_cpu, mask) {
-
-				outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu,
-				     VIC_PROCESSOR_ID);
-				isr = vic_read_isr();
-				if (isr & (1 << irq)) {
-					printk
-					    ("VOYAGER SMP: CPU%d ack irq %d\n",
-					     real_cpu, irq);
-					ack_vic_irq(irq);
-				}
-				outb(cpu, VIC_PROCESSOR_ID);
-			}
-		}
-#endif /* VOYAGER_DEBUG */
-		/* as soon as we ack, the interrupt is eligible for
-		 * receipt by another CPU so everything must be in
-		 * order here  */
-		ack_vic_irq(irq);
-		if (status & IRQ_REPLAY) {
-			/* replay is set if we disable the interrupt
-			 * in the before_handle_vic_irq() routine, so
-			 * clear the in progress bit here to allow the
-			 * next CPU to handle this correctly */
-			desc->status &= ~(IRQ_REPLAY | IRQ_INPROGRESS);
-		}
-#ifdef VOYAGER_DEBUG
-		isr = vic_read_isr();
-		if ((isr & (1 << irq)) != 0)
-			printk("VOYAGER SMP: after_handle_vic_irq() after "
-			       "ack irq=%d, isr=0x%x\n", irq, isr);
-#endif /* VOYAGER_DEBUG */
-	}
-	_raw_spin_unlock(&vic_irq_lock);
-
-	/* All code after this point is out of the main path - the IRQ
-	 * may be intercepted by another CPU if reasserted */
-}
-
-/* Linux processor - interrupt affinity manipulations.
- *
- * For each processor, we maintain a 32 bit irq affinity mask.
- * Initially it is set to all 1's so every processor accepts every
- * interrupt.  In this call, we change the processor's affinity mask:
- *
- * Change from enable to disable:
- *
- * If the interrupt ever comes in to the processor, we will disable it
- * and ack it to push it off to another CPU, so just accept the mask here.
- *
- * Change from disable to enable:
- *
- * change the mask and then do an interrupt enable CPI to re-enable on
- * the selected processors */
-
-void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask)
-{
-	/* Only extended processors handle interrupts */
-	unsigned long real_mask;
-	unsigned long irq_mask = 1 << irq;
-	int cpu;
-
-	real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors;
-
-	if (cpus_addr(*mask)[0] == 0)
-		/* can't have no CPUs to accept the interrupt -- extremely
-		 * bad things will happen */
-		return;
-
-	if (irq == 0)
-		/* can't change the affinity of the timer IRQ.  This
-		 * is due to the constraint in the voyager
-		 * architecture that the CPI also comes in on and IRQ
-		 * line and we have chosen IRQ0 for this.  If you
-		 * raise the mask on this interrupt, the processor
-		 * will no-longer be able to accept VIC CPIs */
-		return;
-
-	if (irq >= 32)
-		/* You can only have 32 interrupts in a voyager system
-		 * (and 32 only if you have a secondary microchannel
-		 * bus) */
-		return;
-
-	for_each_online_cpu(cpu) {
-		unsigned long cpu_mask = 1 << cpu;
-
-		if (cpu_mask & real_mask) {
-			/* enable the interrupt for this cpu */
-			cpu_irq_affinity[cpu] |= irq_mask;
-		} else {
-			/* disable the interrupt for this cpu */
-			cpu_irq_affinity[cpu] &= ~irq_mask;
-		}
-	}
-	/* this is magic, we now have the correct affinity maps, so
-	 * enable the interrupt.  This will send an enable CPI to
-	 * those CPUs who need to enable it in their local masks,
-	 * causing them to correct for the new affinity . If the
-	 * interrupt is currently globally disabled, it will simply be
-	 * disabled again as it comes in (voyager lazy disable).  If
-	 * the affinity map is tightened to disable the interrupt on a
-	 * cpu, it will be pushed off when it comes in */
-	unmask_vic_irq(irq);
-}
-
-static void ack_vic_irq(unsigned int irq)
-{
-	if (irq & 8) {
-		outb(0x62, 0x20);	/* Specific EOI to cascade */
-		outb(0x60 | (irq & 7), 0xA0);
-	} else {
-		outb(0x60 | (irq & 7), 0x20);
-	}
-}
-
-/* enable the CPIs.  In the VIC, the CPIs are delivered by the 8259
- * but are not vectored by it.  This means that the 8259 mask must be
- * lowered to receive them */
-static __init void vic_enable_cpi(void)
-{
-	__u8 cpu = smp_processor_id();
-
-	/* just take a copy of the current mask (nop for boot cpu) */
-	vic_irq_mask[cpu] = vic_irq_mask[boot_cpu_id];
-
-	enable_local_vic_irq(VIC_CPI_LEVEL0);
-	enable_local_vic_irq(VIC_CPI_LEVEL1);
-	/* for sys int and cmn int */
-	enable_local_vic_irq(7);
-
-	if (is_cpu_quad()) {
-		outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0);
-		outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1);
-		VDEBUG(("VOYAGER SMP: QIC ENABLE CPI: CPU%d: MASK 0x%x\n",
-			cpu, QIC_CPI_ENABLE));
-	}
-
-	VDEBUG(("VOYAGER SMP: ENABLE CPI: CPU%d: MASK 0x%x\n",
-		cpu, vic_irq_mask[cpu]));
-}
-
-void voyager_smp_dump()
-{
-	int old_cpu = smp_processor_id(), cpu;
-
-	/* dump the interrupt masks of each processor */
-	for_each_online_cpu(cpu) {
-		__u16 imr, isr, irr;
-		unsigned long flags;
-
-		local_irq_save(flags);
-		outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID);
-		imr = (inb(0xa1) << 8) | inb(0x21);
-		outb(0x0a, 0xa0);
-		irr = inb(0xa0) << 8;
-		outb(0x0a, 0x20);
-		irr |= inb(0x20);
-		outb(0x0b, 0xa0);
-		isr = inb(0xa0) << 8;
-		outb(0x0b, 0x20);
-		isr |= inb(0x20);
-		outb(old_cpu, VIC_PROCESSOR_ID);
-		local_irq_restore(flags);
-		printk("\tCPU%d: mask=0x%x, IMR=0x%x, IRR=0x%x, ISR=0x%x\n",
-		       cpu, vic_irq_mask[cpu], imr, irr, isr);
-#if 0
-		/* These lines are put in to try to unstick an un ack'd irq */
-		if (isr != 0) {
-			int irq;
-			for (irq = 0; irq < 16; irq++) {
-				if (isr & (1 << irq)) {
-					printk("\tCPU%d: ack irq %d\n",
-					       cpu, irq);
-					local_irq_save(flags);
-					outb(VIC_CPU_MASQUERADE_ENABLE | cpu,
-					     VIC_PROCESSOR_ID);
-					ack_vic_irq(irq);
-					outb(old_cpu, VIC_PROCESSOR_ID);
-					local_irq_restore(flags);
-				}
-			}
-		}
-#endif
-	}
-}
-
-void smp_voyager_power_off(void *dummy)
-{
-	if (smp_processor_id() == boot_cpu_id)
-		voyager_power_off();
-	else
-		smp_stop_cpu_function(NULL);
-}
-
-static void __init voyager_smp_prepare_cpus(unsigned int max_cpus)
-{
-	/* FIXME: ignore max_cpus for now */
-	smp_boot_cpus();
-}
-
-static void __cpuinit voyager_smp_prepare_boot_cpu(void)
-{
-	int cpu = smp_processor_id();
-	switch_to_new_gdt(cpu);
-
-	cpu_set(cpu, cpu_online_map);
-	cpu_set(cpu, cpu_callout_map);
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
-
-}
-
-static int __cpuinit voyager_cpu_up(unsigned int cpu)
-{
-	/* This only works at boot for x86.  See "rewrite" above. */
-	if (cpu_isset(cpu, smp_commenced_mask))
-		return -ENOSYS;
-
-	/* In case one didn't come up */
-	if (!cpu_isset(cpu, cpu_callin_map))
-		return -EIO;
-	/* Unleash the CPU! */
-	cpu_set(cpu, smp_commenced_mask);
-	while (!cpu_online(cpu))
-		mb();
-	return 0;
-}
-
-static void __init voyager_smp_cpus_done(unsigned int max_cpus)
-{
-	zap_low_mappings();
-}
-
-void __init smp_setup_processor_id(void)
-{
-	current_thread_info()->cpu = hard_smp_processor_id();
-}
-
-static void voyager_send_call_func(const struct cpumask *callmask)
-{
-	__u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id());
-	send_CPI(mask, VIC_CALL_FUNCTION_CPI);
-}
-
-static void voyager_send_call_func_single(int cpu)
-{
-	send_CPI(1 << cpu, VIC_CALL_FUNCTION_SINGLE_CPI);
-}
-
-struct smp_ops smp_ops = {
-	.smp_prepare_boot_cpu = voyager_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = voyager_smp_prepare_cpus,
-	.cpu_up = voyager_cpu_up,
-	.smp_cpus_done = voyager_smp_cpus_done,
-
-	.smp_send_stop = voyager_smp_send_stop,
-	.smp_send_reschedule = voyager_smp_send_reschedule,
-
-	.send_call_func_ipi = voyager_send_call_func,
-	.send_call_func_single_ipi = voyager_send_call_func_single,
-};
diff --git a/arch/x86/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c
deleted file mode 100644
index 15464a20fb3..00000000000
--- a/arch/x86/mach-voyager/voyager_thread.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * This module provides the machine status monitor thread for the
- * voyager architecture.  This allows us to monitor the machine
- * environment (temp, voltage, fan function) and the front panel and
- * internal UPS.  If a fault is detected, this thread takes corrective
- * action (usually just informing init)
- * */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/kmod.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <linux/kthread.h>
-#include <asm/desc.h>
-#include <asm/voyager.h>
-#include <asm/vic.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-
-struct task_struct *voyager_thread;
-static __u8 set_timeout;
-
-static int execute(const char *string)
-{
-	int ret;
-
-	char *envp[] = {
-		"HOME=/",
-		"TERM=linux",
-		"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
-		NULL,
-	};
-	char *argv[] = {
-		"/bin/bash",
-		"-c",
-		(char *)string,
-		NULL,
-	};
-
-	if ((ret =
-	     call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC)) != 0) {
-		printk(KERN_ERR "Voyager failed to run \"%s\": %i\n", string,
-		       ret);
-	}
-	return ret;
-}
-
-static void check_from_kernel(void)
-{
-	if (voyager_status.switch_off) {
-
-		/* FIXME: This should be configurable via proc */
-		execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
-	} else if (voyager_status.power_fail) {
-		VDEBUG(("Voyager daemon detected AC power failure\n"));
-
-		/* FIXME: This should be configureable via proc */
-		execute("umask 600; echo F > /etc/powerstatus; kill -PWR 1");
-		set_timeout = 1;
-	}
-}
-
-static void check_continuing_condition(void)
-{
-	if (voyager_status.power_fail) {
-		__u8 data;
-		voyager_cat_psi(VOYAGER_PSI_SUBREAD,
-				VOYAGER_PSI_AC_FAIL_REG, &data);
-		if ((data & 0x1f) == 0) {
-			/* all power restored */
-			printk(KERN_NOTICE
-			       "VOYAGER AC power restored, cancelling shutdown\n");
-			/* FIXME: should be user configureable */
-			execute
-			    ("umask 600; echo O > /etc/powerstatus; kill -PWR 1");
-			set_timeout = 0;
-		}
-	}
-}
-
-static int thread(void *unused)
-{
-	printk(KERN_NOTICE "Voyager starting monitor thread\n");
-
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(set_timeout ? HZ : MAX_SCHEDULE_TIMEOUT);
-
-		VDEBUG(("Voyager Daemon awoken\n"));
-		if (voyager_status.request_from_kernel == 0) {
-			/* probably awoken from timeout */
-			check_continuing_condition();
-		} else {
-			check_from_kernel();
-			voyager_status.request_from_kernel = 0;
-		}
-	}
-}
-
-static int __init voyager_thread_start(void)
-{
-	voyager_thread = kthread_run(thread, NULL, "kvoyagerd");
-	if (IS_ERR(voyager_thread)) {
-		printk(KERN_ERR
-		       "Voyager: Failed to create system monitor thread.\n");
-		return PTR_ERR(voyager_thread);
-	}
-	return 0;
-}
-
-static void __exit voyager_thread_stop(void)
-{
-	kthread_stop(voyager_thread);
-}
-
-module_init(voyager_thread_start);
-module_exit(voyager_thread_stop);
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 87b9ab16642..b83e119fbeb 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -6,7 +6,7 @@ config XEN
 	bool "Xen guest support"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on X86_64 || (X86_32 && X86_PAE && !(X86_VISWS || X86_VOYAGER))
+	depends on X86_64 || (X86_32 && X86_PAE && !X86_VISWS)
 	depends on X86_CMPXCHG && X86_TSC
 	help
 	  This is the Linux Xen port.  Enabling this will allow the
-- 
cgit v1.2.3


From d85a881d780cc7aaebe1b7aefcddbcb939acbe2d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 23 Feb 2009 00:29:45 +0100
Subject: x86: remove various unused subarch hooks

Impact: remove dead code

Remove:

 - pre_setup_arch_hook()
 - mca_nmi_hook()

If needed they can be added back via an x86_quirk handler.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/arch_hooks.h |  6 +++---
 arch/x86/kernel/mca_32.c          |  4 +---
 arch/x86/kernel/setup.c           | 34 ----------------------------------
 3 files changed, 4 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/arch_hooks.h b/arch/x86/include/asm/arch_hooks.h
index cbd4957838a..54248172be1 100644
--- a/arch/x86/include/asm/arch_hooks.h
+++ b/arch/x86/include/asm/arch_hooks.h
@@ -15,12 +15,12 @@ extern void init_ISA_irqs(void);
 extern irqreturn_t timer_interrupt(int irq, void *dev_id);
 
 /* these are the defined hooks */
-extern void intr_init_hook(void);
 extern void pre_intr_init_hook(void);
-extern void pre_setup_arch_hook(void);
+extern void intr_init_hook(void);
+
 extern void trap_init_hook(void);
+
 extern void pre_time_init_hook(void);
 extern void time_init_hook(void);
-extern void mca_nmi_hook(void);
 
 #endif /* _ASM_X86_ARCH_HOOKS_H */
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
index 2dc183758be..f74eef52ab5 100644
--- a/arch/x86/kernel/mca_32.c
+++ b/arch/x86/kernel/mca_32.c
@@ -474,6 +474,4 @@ void __kprobes mca_handle_nmi(void)
 	 * adapter was responsible for the error.
 	 */
 	bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
-
-	mca_nmi_hook();
-} /* mca_handle_nmi */
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d699811b3f7..d4de1e4c204 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -668,7 +668,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
-	pre_setup_arch_hook();
 #else
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
@@ -1022,18 +1021,6 @@ void __init intr_init_hook(void)
 	}
 }
 
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On Voyager
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-}
-
 /**
  * trap_init_hook - initialise system specific traps
  *
@@ -1088,25 +1075,4 @@ void __init time_init_hook(void)
 	irq0.mask = cpumask_of_cpu(0);
 	setup_irq(0, &irq0);
 }
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void mca_nmi_hook(void)
-{
-	/*
-	 * If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-	pr_warning("NMI generated from unknown source!\n");
-}
-#endif /* CONFIG_MCA */
-
 #endif /* CONFIG_X86_32 */
-- 
cgit v1.2.3


From 8e6dafd6c741cd4679b4de3c5d9698851e4fa59c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 23 Feb 2009 00:34:39 +0100
Subject: x86: refactor x86_quirks support

Impact: cleanup

Make x86_quirks support more transparent. The highlevel
methods are now named:

  extern void x86_quirk_pre_intr_init(void);
  extern void x86_quirk_intr_init(void);

  extern void x86_quirk_trap_init(void);

  extern void x86_quirk_pre_time_init(void);
  extern void x86_quirk_time_init(void);

This makes it clear that if some platform extension has to
do something here that it is considered ... weird, and is
discouraged.

Also remove arch_hooks.h and move it into setup.h (and other
header files where appropriate).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/arch_hooks.h | 26 --------------------------
 arch/x86/include/asm/i8259.h      |  4 ++++
 arch/x86/include/asm/setup.h      |  9 +++++++++
 arch/x86/include/asm/timer.h      |  2 ++
 arch/x86/kernel/apic/apic.c       |  1 -
 arch/x86/kernel/apic/probe_32.c   |  1 -
 arch/x86/kernel/i8259.c           |  1 -
 arch/x86/kernel/irqinit_32.c      | 13 +++++++------
 arch/x86/kernel/kvmclock.c        |  1 -
 arch/x86/kernel/mca_32.c          |  1 -
 arch/x86/kernel/paravirt.c        |  1 -
 arch/x86/kernel/setup.c           | 23 ++++++++++++-----------
 arch/x86/kernel/time_32.c         |  6 +++---
 arch/x86/kernel/traps.c           |  4 ++--
 arch/x86/kernel/visws_quirks.c    |  1 -
 arch/x86/kernel/vmiclock_32.c     |  1 -
 16 files changed, 39 insertions(+), 56 deletions(-)
 delete mode 100644 arch/x86/include/asm/arch_hooks.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/arch_hooks.h b/arch/x86/include/asm/arch_hooks.h
deleted file mode 100644
index 54248172be1..00000000000
--- a/arch/x86/include/asm/arch_hooks.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ASM_X86_ARCH_HOOKS_H
-#define _ASM_X86_ARCH_HOOKS_H
-
-#include <linux/interrupt.h>
-
-/*
- *	linux/include/asm/arch_hooks.h
- *
- *	define the architecture specific hooks
- */
-
-/* these aren't arch hooks, they are generic routines
- * that can be used by the hooks */
-extern void init_ISA_irqs(void);
-extern irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-/* these are the defined hooks */
-extern void pre_intr_init_hook(void);
-extern void intr_init_hook(void);
-
-extern void trap_init_hook(void);
-
-extern void pre_time_init_hook(void);
-extern void time_init_hook(void);
-
-#endif /* _ASM_X86_ARCH_HOOKS_H */
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
index 58d7091eeb1..1a99e6c092a 100644
--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -60,4 +60,8 @@ extern struct irq_chip i8259A_chip;
 extern void mask_8259A(void);
 extern void unmask_8259A(void);
 
+#ifdef CONFIG_X86_32
+extern void init_ISA_irqs(void);
+#endif
+
 #endif /* _ASM_X86_I8259_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 8029369cd6f..66801cb72f6 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -13,6 +13,7 @@
 struct mpc_cpu;
 struct mpc_bus;
 struct mpc_oemtable;
+
 struct x86_quirks {
 	int (*arch_pre_time_init)(void);
 	int (*arch_time_init)(void);
@@ -33,6 +34,14 @@ struct x86_quirks {
 	int (*update_apic)(void);
 };
 
+extern void x86_quirk_pre_intr_init(void);
+extern void x86_quirk_intr_init(void);
+
+extern void x86_quirk_trap_init(void);
+
+extern void x86_quirk_pre_time_init(void);
+extern void x86_quirk_time_init(void);
+
 #endif /* __ASSEMBLY__ */
 
 #ifdef __i386__
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index 2bb6a835c45..a81195eaa2b 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/percpu.h>
+#include <linux/interrupt.h>
 
 #define TICK_SIZE (tick_nsec / 1000)
 
@@ -12,6 +13,7 @@ unsigned long native_calibrate_tsc(void);
 #ifdef CONFIG_X86_32
 extern int timer_ack;
 extern int recalibrate_cpu_khz(void);
+extern irqreturn_t timer_interrupt(int irq, void *dev_id);
 #endif /* CONFIG_X86_32 */
 
 extern int no_timer_check;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c6bd7710585..f9cecdfd05c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -34,7 +34,6 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 
-#include <asm/arch_hooks.h>
 #include <asm/pgalloc.h>
 #include <asm/atomic.h>
 #include <asm/mpspec.h>
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index c9ec90742e9..3a730fa574b 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -35,7 +35,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/acpi.h>
-#include <asm/arch_hooks.h>
 #include <asm/e820.h>
 #include <asm/setup.h>
 
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 11d5093eb28..df89102bef8 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -22,7 +22,6 @@
 #include <asm/pgtable.h>
 #include <asm/desc.h>
 #include <asm/apic.h>
-#include <asm/arch_hooks.h>
 #include <asm/i8259.h>
 
 /*
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index bf629cadec1..50b8c3a3006 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -18,7 +18,7 @@
 #include <asm/pgtable.h>
 #include <asm/desc.h>
 #include <asm/apic.h>
-#include <asm/arch_hooks.h>
+#include <asm/setup.h>
 #include <asm/i8259.h>
 #include <asm/traps.h>
 
@@ -127,8 +127,8 @@ void __init native_init_IRQ(void)
 {
 	int i;
 
-	/* all the set up before the call gates are initialised */
-	pre_intr_init_hook();
+	/* Execute any quirks before the call gates are initialised: */
+	x86_quirk_pre_intr_init();
 
 	/*
 	 * Cover the whole vector space, no vector can escape
@@ -188,10 +188,11 @@ void __init native_init_IRQ(void)
 	if (!acpi_ioapic)
 		setup_irq(2, &irq2);
 
-	/* setup after call gates are initialised (usually add in
-	 * the architecture specific gates)
+	/*
+	 * Call quirks after call gates are initialised (usually add in
+	 * the architecture specific gates):
 	 */
-	intr_init_hook();
+	x86_quirk_intr_init();
 
 	/*
 	 * External FPU? Set up irq13 if so, for
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 652fce6d2cc..137f2e8132d 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -19,7 +19,6 @@
 #include <linux/clocksource.h>
 #include <linux/kvm_para.h>
 #include <asm/pvclock.h>
-#include <asm/arch_hooks.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <linux/percpu.h>
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
index f74eef52ab5..845d80ce1ef 100644
--- a/arch/x86/kernel/mca_32.c
+++ b/arch/x86/kernel/mca_32.c
@@ -51,7 +51,6 @@
 #include <linux/ioport.h>
 #include <asm/uaccess.h>
 #include <linux/init.h>
-#include <asm/arch_hooks.h>
 
 static unsigned char which_scsi;
 
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 6dc4dca255e..63dd358d8ee 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -28,7 +28,6 @@
 #include <asm/paravirt.h>
 #include <asm/desc.h>
 #include <asm/setup.h>
-#include <asm/arch_hooks.h>
 #include <asm/pgtable.h>
 #include <asm/time.h>
 #include <asm/pgalloc.h>
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d4de1e4c204..5b85759e797 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -74,8 +74,9 @@
 #include <asm/e820.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
-#include <asm/arch_hooks.h>
 #include <asm/efi.h>
+#include <asm/timer.h>
+#include <asm/i8259.h>
 #include <asm/sections.h>
 #include <asm/dmi.h>
 #include <asm/io_apic.h>
@@ -987,7 +988,7 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_32
 
 /**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
  *
  * Description:
  *	Perform any necessary interrupt initialisation prior to setting up
@@ -995,7 +996,7 @@ void __init setup_arch(char **cmdline_p)
  *	interrupts should be initialised here if the machine emulates a PC
  *	in any way.
  **/
-void __init pre_intr_init_hook(void)
+void __init x86_quirk_pre_intr_init(void)
 {
 	if (x86_quirks->arch_pre_intr_init) {
 		if (x86_quirks->arch_pre_intr_init())
@@ -1005,7 +1006,7 @@ void __init pre_intr_init_hook(void)
 }
 
 /**
- * intr_init_hook - post gate setup interrupt initialisation
+ * x86_quirk_intr_init - post gate setup interrupt initialisation
  *
  * Description:
  *	Fill in any interrupts that may have been left out by the general
@@ -1013,7 +1014,7 @@ void __init pre_intr_init_hook(void)
  *	than the devices on the I/O bus (like APIC interrupts in intel MP
  *	systems) are started here.
  **/
-void __init intr_init_hook(void)
+void __init x86_quirk_intr_init(void)
 {
 	if (x86_quirks->arch_intr_init) {
 		if (x86_quirks->arch_intr_init())
@@ -1022,13 +1023,13 @@ void __init intr_init_hook(void)
 }
 
 /**
- * trap_init_hook - initialise system specific traps
+ * x86_quirk_trap_init - initialise system specific traps
  *
  * Description:
  *	Called as the final act of trap_init().  Used in VISWS to initialise
  *	the various board specific APIC traps.
  **/
-void __init trap_init_hook(void)
+void __init x86_quirk_trap_init(void)
 {
 	if (x86_quirks->arch_trap_init) {
 		if (x86_quirks->arch_trap_init())
@@ -1044,23 +1045,23 @@ static struct irqaction irq0  = {
 };
 
 /**
- * pre_time_init_hook - do any specific initialisations before.
+ * x86_quirk_pre_time_init - do any specific initialisations before.
  *
  **/
-void __init pre_time_init_hook(void)
+void __init x86_quirk_pre_time_init(void)
 {
 	if (x86_quirks->arch_pre_time_init)
 		x86_quirks->arch_pre_time_init();
 }
 
 /**
- * time_init_hook - do any specific initialisations for the system timer.
+ * x86_quirk_time_init - do any specific initialisations for the system timer.
  *
  * Description:
  *	Must plug the system timer interrupt source at HZ into the IRQ listed
  *	in irq_vectors.h:TIMER_IRQ
  **/
-void __init time_init_hook(void)
+void __init x86_quirk_time_init(void)
 {
 	if (x86_quirks->arch_time_init) {
 		/*
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 764c74e871f..5c5d87f0b2e 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -33,7 +33,7 @@
 #include <linux/time.h>
 #include <linux/mca.h>
 
-#include <asm/arch_hooks.h>
+#include <asm/setup.h>
 #include <asm/hpet.h>
 #include <asm/time.h>
 #include <asm/timer.h>
@@ -118,7 +118,7 @@ void __init hpet_time_init(void)
 {
 	if (!hpet_enable())
 		setup_pit_timer();
-	time_init_hook();
+	x86_quirk_time_init();
 }
 
 /*
@@ -131,7 +131,7 @@ void __init hpet_time_init(void)
  */
 void __init time_init(void)
 {
-	pre_time_init_hook();
+	x86_quirk_pre_time_init();
 	tsc_init();
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index acb8c0585ab..c8c0a7e530b 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -61,7 +61,7 @@
 #include <asm/proto.h>
 #else
 #include <asm/processor-flags.h>
-#include <asm/arch_hooks.h>
+#include <asm/setup.h>
 #include <asm/traps.h>
 
 #include "cpu/mcheck/mce.h"
@@ -1026,6 +1026,6 @@ void __init trap_init(void)
 	cpu_init();
 
 #ifdef CONFIG_X86_32
-	trap_init_hook();
+	x86_quirk_trap_init();
 #endif
 }
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 34199d30ff4..191a876e9e8 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -24,7 +24,6 @@
 
 #include <asm/visws/cobalt.h>
 #include <asm/visws/piix4.h>
-#include <asm/arch_hooks.h>
 #include <asm/io_apic.h>
 #include <asm/fixmap.h>
 #include <asm/reboot.h>
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 8c48b465059..49b4cd6707f 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -28,7 +28,6 @@
 
 #include <asm/vmi.h>
 #include <asm/vmi_time.h>
-#include <asm/arch_hooks.h>
 #include <asm/apicdef.h>
 #include <asm/apic.h>
 #include <asm/timer.h>
-- 
cgit v1.2.3


From ecda06289f8202d4c6beb235f59ea464f4a91209 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 22 Feb 2009 22:14:56 -0800
Subject: x86: check mptable physptr with max_low_pfn on 32bit

Impact: fix early crash on LinuxBIOS systems

Kevin O'Connor reported that Coreboot aka LinuxBIOS tries to put
mptable somewhere very high, well above max_low_pfn (below which
BIOSes generally put the mptable), causing a panic.

The BIOS will probably be changed to be compatible with older
Linus versions, but nevertheless the MP-spec does not forbid
an MP-table in arbitrary system RAM, so make sure it all
works even if the table is in an unexpected place.

Check physptr with max_low_pfn * PAGE_SIZE.

Reported-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Stefan Reinauer <stepan@coresystems.de>
Cc: coreboot@coreboot.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/mpparse.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 7f4d2586972..37cb1bda1ba 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -710,13 +710,22 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 				 * of physical memory; so that simply reserving
 				 * PAGE_SIZE from mpf->physptr yields BUG()
 				 * in reserve_bootmem.
+				 * also need to make sure physptr is below than
+				 * max_low_pfn
+				 * we don't need reserve the area above max_low_pfn
 				 */
 				unsigned long end = max_low_pfn * PAGE_SIZE;
-				if (mpf->physptr + size > end)
-					size = end - mpf->physptr;
-#endif
+
+				if (mpf->physptr < end) {
+					if (mpf->physptr + size > end)
+						size = end - mpf->physptr;
+					reserve_bootmem_generic(mpf->physptr, size,
+							BOOTMEM_DEFAULT);
+				}
+#else
 				reserve_bootmem_generic(mpf->physptr, size,
 						BOOTMEM_DEFAULT);
+#endif
 			}
 
 			return 1;
-- 
cgit v1.2.3


From d41ad52040dee5043ce6b1d49a1c8864706d2bfd Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 5 Feb 2009 20:45:25 -0700
Subject: [ARM] OMAP3: update ES level flags to discriminate between post-ES2
 revisions

Some OMAP3 chip behaviors change in ES levels after ES2.  Modify the
existing omap_chip flags to add options for ES3.0 and ES3.1.

Add a new macro, CHIP_GE_OMAP3430ES2, to cover ES levels from ES2
onwards - a common pattern for OMAP3 features.  Update all current
users of the omap_chip macros to use this new macro.

Also add CHIP_GE_OMAP3430ES3_1 to cover the USBTLL SAR errata case
(described and fixed in the following patch)

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomains.h     |  6 +++---
 arch/arm/mach-omap2/id.c               |  7 ++++++-
 arch/arm/mach-omap2/powerdomains34xx.h |  6 +++---
 arch/arm/plat-omap/include/mach/cpu.h  | 26 ++++++++++++++++++++------
 4 files changed, 32 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index d7db796403d..281d5da1918 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -182,7 +182,7 @@ static struct clockdomain sgx_clkdm = {
 	.pwrdm		= { .name = "sgx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
 /*
@@ -237,7 +237,7 @@ static struct clockdomain usbhost_clkdm = {
 	.pwrdm		= { .name = "usbhost_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
 static struct clockdomain per_clkdm = {
@@ -287,7 +287,7 @@ static struct clockdomain dpll4_clkdm = {
 static struct clockdomain dpll5_clkdm = {
 	.name		= "dpll5_clkdm",
 	.pwrdm		= { .name = "dpll5_pwrdm" },
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
 #endif   /* CONFIG_ARCH_OMAP34XX */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index b52a02fc7cd..34b5914e0f8 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -217,8 +217,13 @@ void __init omap2_check_revision(void)
 		omap_chip.oc = CHIP_IS_OMAP3430;
 		if (omap_rev() == OMAP3430_REV_ES1_0)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-		else if (omap_rev() > OMAP3430_REV_ES1_0)
+		else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
+			 omap_rev() <= OMAP3430_REV_ES2_1)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+		else if (omap_rev() == OMAP3430_REV_ES3_0)
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+		else if (omap_rev() == OMAP3430_REV_ES3_1)
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 	} else {
 		pr_err("Uninitialized omap_chip, please fix!\n");
 	}
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 15c346c627d..78acfce8bbd 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -244,7 +244,7 @@ static struct powerdomain dss_pwrdm = {
 static struct powerdomain sgx_pwrdm = {
 	.name		  = "sgx_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 	.wkdep_srcs	  = gfx_sgx_wkdeps,
 	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	/* XXX This is accurate for 3430 SGX, but what about GFX? */
@@ -312,7 +312,7 @@ static struct powerdomain neon_pwrdm = {
 static struct powerdomain usbhost_pwrdm = {
 	.name		  = "usbhost_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 	.wkdep_srcs	  = per_usbhost_wkdeps,
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
@@ -354,7 +354,7 @@ static struct powerdomain dpll4_pwrdm = {
 static struct powerdomain dpll5_pwrdm = {
 	.name		= "dpll5_pwrdm",
 	.prcm_offs	= PLL_MOD,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
 
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index a8e1178a946..4166a970daa 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -355,13 +355,27 @@ IS_OMAP_TYPE(3430, 0x3430)
  * use omap_chip_is().
  *
  */
-#define CHIP_IS_OMAP2420       (1 << 0)
-#define CHIP_IS_OMAP2430       (1 << 1)
-#define CHIP_IS_OMAP3430       (1 << 2)
-#define CHIP_IS_OMAP3430ES1    (1 << 3)
-#define CHIP_IS_OMAP3430ES2    (1 << 4)
+#define CHIP_IS_OMAP2420		(1 << 0)
+#define CHIP_IS_OMAP2430		(1 << 1)
+#define CHIP_IS_OMAP3430		(1 << 2)
+#define CHIP_IS_OMAP3430ES1		(1 << 3)
+#define CHIP_IS_OMAP3430ES2		(1 << 4)
+#define CHIP_IS_OMAP3430ES3_0		(1 << 5)
+#define CHIP_IS_OMAP3430ES3_1		(1 << 6)
+
+#define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+/*
+ * "GE" here represents "greater than or equal to" in terms of ES
+ * levels.  So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
+ * chips at ES2 and beyond, but not, for example, any OMAP lines after
+ * OMAP3.
+ */
+#define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
+					 CHIP_IS_OMAP3430ES3_0 | \
+					 CHIP_IS_OMAP3430ES3_1)
+#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1)
 
-#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
 int omap_chip_is(struct omap_chip_id oci);
 int omap_type(void);
-- 
cgit v1.2.3


From 7eb1afc9765d07c9036b1ad9e7c03e5bd1a58a2b Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 5 Feb 2009 20:45:28 -0700
Subject: [ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and
 beyond

Richard Woodruff writes that chip errata prevent USBTLL SAR from working
on OMAP3 ES levels before ES3.1:

http://marc.info/?l=linux-arm-kernel&m=123319614808833&w=2

Update the OMAP3 powerdomain structures appropriately.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/powerdomains.h     |  3 ++-
 arch/arm/mach-omap2/powerdomains34xx.h | 25 +++++++++++++++++++++++--
 2 files changed, 25 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 1329443f2cd..691470ea4c6 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -171,7 +171,8 @@ static struct powerdomain *powerdomains_omap[] __initdata = {
 	&iva2_pwrdm,
 	&mpu_34xx_pwrdm,
 	&neon_pwrdm,
-	&core_34xx_pwrdm,
+	&core_34xx_pre_es3_1_pwrdm,
+	&core_34xx_es3_1_pwrdm,
 	&cam_pwrdm,
 	&dss_pwrdm,
 	&per_pwrdm,
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 78acfce8bbd..4dcf94b800a 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -200,12 +200,33 @@ static struct powerdomain mpu_34xx_pwrdm = {
 };
 
 /* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_pwrdm = {
+static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
+					   CHIP_IS_OMAP3430ES2 |
+					   CHIP_IS_OMAP3430ES3_0),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.banks		  = 2,
+	.pwrsts_mem_ret	  = {
+		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
+		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
+	},
+	.pwrsts_mem_on	  = {
+		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+	},
+};
+
+/* No wkdeps or sleepdeps for 34xx core apparently */
+static struct powerdomain core_34xx_es3_1_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
 	.banks		  = 2,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
-- 
cgit v1.2.3


From 7aec53acc0504ab2abd73a6051e7b72f48545ceb Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 22 Feb 2009 21:00:55 +0000
Subject: [ARM] omap: ensure that failing power domain lookups produce errors

Use pr_err() for errors rather than pr_debug().  pr_debug() are
compiled away unless -DDEBUG is used.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clockdomain.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ae0c53abb55..0e7d501865b 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -74,14 +74,11 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
 
 	pwrdm = pwrdm_lookup(autodep->pwrdm.name);
 	if (!pwrdm) {
-		pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
-			 "does not exist\n", autodep->pwrdm.name);
-		WARN_ON(1);
+		pr_err("clockdomain: autodeps: powerdomain %s does not exist\n",
+			 autodep->pwrdm.name);
 		pwrdm = ERR_PTR(-ENOENT);
 	}
 	autodep->pwrdm.ptr = pwrdm;
-
-	return;
 }
 
 /*
@@ -211,8 +208,8 @@ int clkdm_register(struct clockdomain *clkdm)
 
 	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
 	if (!pwrdm) {
-		pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
-			 "does not exist\n", clkdm->name, clkdm->pwrdm.name);
+		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
+			clkdm->name, clkdm->pwrdm.name);
 		return -EINVAL;
 	}
 	clkdm->pwrdm.ptr = pwrdm;
@@ -222,7 +219,7 @@ int clkdm_register(struct clockdomain *clkdm)
 	if (_clkdm_lookup(clkdm->name)) {
 		ret = -EEXIST;
 		goto cr_unlock;
-	};
+	}
 
 	list_add(&clkdm->node, &clkdm_list);
 
-- 
cgit v1.2.3


From bda3a89745d7bb88d3e735046c0cdc3d0eb2ac24 Mon Sep 17 00:00:00 2001
From: Stas Sergeev <stsp@aknet.ru>
Date: Mon, 23 Feb 2009 19:13:07 +0300
Subject: x86: minor cleanup in the espfix code

Impact: Cleanup

Checkin be44d2aabce2d62f72d5751d1871b6212bf7a1c7 eliminates the use of
a 16-bit stack for espfix.  However, at least one instruction remained
that only operated on the low 16 bits of %esp.

This is not a bug per se because the kernel stack is always an aligned
4K or 8K block.  Therefore it cannot cross 64K boundaries; this code,
in fact, relies strictly on that fact.

However, it's a lot cleaner (and, for that matter, smaller) to operate
on the entire 32-bit register.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
CC: Zachary Amsden <zach@vmware.com>
CC: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/entry_32.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 999e827ef9c..899e8938e79 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1359,7 +1359,7 @@ nmi_espfix_stack:
 	CFI_ADJUST_CFA_OFFSET 4
 	pushl %esp
 	CFI_ADJUST_CFA_OFFSET 4
-	addw $4, (%esp)
+	addl $4, (%esp)
 	/* copy the iret frame of 12 bytes */
 	.rept 3
 	pushl 16(%esp)
-- 
cgit v1.2.3


From c132937556f56ee4b831ef4b23f1846e05fde102 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:20 +0900
Subject: bootmem: clean up arch-specific bootmem wrapping

Impact: cleaner and consistent bootmem wrapping

By setting CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define
arch-specific wrappers for bootmem allocation.  However, this is done
a bit strangely in that only the high level convenience macros can be
changed while lower level, but still exported, interface functions
can't be wrapped.  This not only is messy but also leads to strange
situation where alloc_bootmem() does what the arch wants it to do but
the equivalent __alloc_bootmem() call doesn't although they should be
able to be used interchangeably.

This patch updates bootmem such that archs can override / wrap the
backend function - alloc_bootmem_core() instead of the highlevel
interface functions to allow simpler and consistent wrapping.  Also,
HAVE_ARCH_BOOTMEM_NODE is renamed to HAVE_ARCH_BOOTMEM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@saeurebad.de>
---
 arch/avr32/Kconfig               |  2 +-
 arch/x86/Kconfig                 |  2 +-
 arch/x86/include/asm/mmzone_32.h | 43 +++++-----------------------------------
 3 files changed, 7 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index b189680d18b..05fe3053dca 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt"
 config QUICKLIST
 	def_bool y
 
-config HAVE_ARCH_BOOTMEM_NODE
+config HAVE_ARCH_BOOTMEM
 	def_bool n
 
 config ARCH_HAVE_MEMORY_PRESENT
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d3f6eadfd4b..6fd3b2302ed 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1111,7 +1111,7 @@ config NODES_SHIFT
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
 
-config HAVE_ARCH_BOOTMEM_NODE
+config HAVE_ARCH_BOOTMEM
 	def_bool y
 	depends on X86_32 && NUMA
 
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 07f1af494ca..1e0fa9e63af 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -93,45 +93,12 @@ static inline int pfn_valid(int pfn)
 #endif /* CONFIG_DISCONTIGMEM */
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-
-/*
- * Following are macros that are specific to this numa platform.
- */
-#define reserve_bootmem(addr, size, flags) \
-	reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
-#define alloc_bootmem(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_nopanic(x) \
-	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
-				__pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_low(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
-#define alloc_bootmem_pages(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_pages_nopanic(x) \
-	__alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
-				__pa(MAX_DMA_ADDRESS))
-#define alloc_bootmem_low_pages(x) \
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
-#define alloc_bootmem_node(pgdat, x)					\
-({									\
-	struct pglist_data  __maybe_unused			\
-				*__alloc_bootmem_node__pgdat = (pgdat);	\
-	__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES,	\
-						__pa(MAX_DMA_ADDRESS));	\
-})
-#define alloc_bootmem_pages_node(pgdat, x)				\
-({									\
-	struct pglist_data  __maybe_unused			\
-				*__alloc_bootmem_node__pgdat = (pgdat);	\
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE,		\
-						__pa(MAX_DMA_ADDRESS));	\
-})
-#define alloc_bootmem_low_pages_node(pgdat, x)				\
+/* always use node 0 for bootmem on this numa platform */
+#define alloc_bootmem_core(__bdata, size, align, goal, limit)		\
 ({									\
-	struct pglist_data  __maybe_unused			\
-				*__alloc_bootmem_node__pgdat = (pgdat);	\
-	__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0);		\
+	bootmem_data_t __maybe_unused *	__abm_bdata_dummy = (__bdata);	\
+	__alloc_bootmem_core(NODE_DATA(0)->bdata,			\
+			     (size), (align), (goal), (limit));		\
 })
 #endif /* CONFIG_NEED_MULTIPLE_NODES */
 
-- 
cgit v1.2.3


From c0c0a29379b5848aec2e8f1c58d853d3cb7118b8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:21 +0900
Subject: vmalloc: add @align to vm_area_register_early()

Impact: allow larger alignment for early vmalloc area allocation

Some early vmalloc users might want larger alignment, for example, for
custom large page mapping.  Add @align to vm_area_register_early().
While at it, drop docbook comment on non-existent @size.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
---
 arch/alpha/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index df6df025ded..91eddd8505d 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -200,7 +200,7 @@ callback_init(void * kernel_end)
 		/* register the vm area */
 		console_remap_vm.flags = VM_ALLOC;
 		console_remap_vm.size = nr_pages << PAGE_SHIFT;
-		vm_area_register_early(&console_remap_vm);
+		vm_area_register_early(&console_remap_vm, PAGE_SIZE);
 
 		vaddr = (unsigned long)consle_remap_vm.addr;
 
-- 
cgit v1.2.3


From 458a3e644c3327be529393982e24277eda8f1ac7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:21 +0900
Subject: x86: update populate_extra_pte() and add populate_extra_pmd()

Impact: minor change to populate_extra_pte() and addition of pmd flavor

Update populate_extra_pte() to return pointer to the pte_t for the
specified address and add populate_extra_pmd() which only populates
till the pmd and returns pointer to the pmd entry for the address.

For 64bit, pud/pmd/pte fill functions are separated out from
set_pte_vaddr[_pud]() and used for set_pte_vaddr[_pud]() and
populate_extra_{pte|pmd}().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/pgtable.h |  3 +-
 arch/x86/kernel/setup_percpu.c |  7 +++-
 arch/x86/mm/init_32.c          | 13 ++++++--
 arch/x86/mm/init_64.c          | 75 +++++++++++++++++++++++++-----------------
 4 files changed, 63 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index dd91c2515c6..46312eb0d68 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -402,7 +402,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 
 /* Install a pte for a particular vaddr in kernel space. */
 void set_pte_vaddr(unsigned long vaddr, pte_t pte);
-void populate_extra_pte(unsigned long vaddr);
+pmd_t *populate_extra_pmd(unsigned long vaddr);
+pte_t *populate_extra_pte(unsigned long vaddr);
 
 #ifdef CONFIG_X86_32
 extern void native_pagetable_setup_start(pgd_t *base);
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 2dce4355821..671e6528a82 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -41,6 +41,11 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
+static void __init pcpu4k_populate_pte(unsigned long addr)
+{
+	populate_extra_pte(addr);
+}
+
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -104,7 +109,7 @@ void __init setup_per_cpu_areas(void)
 		}
 	}
 
-	pcpu_unit_size = pcpu_setup_static(populate_extra_pte, pages, size);
+	pcpu_unit_size = pcpu_setup_static(pcpu4k_populate_pte, pages, size);
 
 	free_bootmem(__pa(pages), pages_size);
 
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 8b1a0ef7f87..84a26883ab4 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -137,14 +137,21 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
 	return pte_offset_kernel(pmd, 0);
 }
 
-void __init populate_extra_pte(unsigned long vaddr)
+pmd_t * __init populate_extra_pmd(unsigned long vaddr)
 {
 	int pgd_idx = pgd_index(vaddr);
 	int pmd_idx = pmd_index(vaddr);
+
+	return one_md_table_init(swapper_pg_dir + pgd_idx) + pmd_idx;
+}
+
+pte_t * __init populate_extra_pte(unsigned long vaddr)
+{
+	int pte_idx = pte_index(vaddr);
 	pmd_t *pmd;
 
-	pmd = one_md_table_init(swapper_pg_dir + pgd_idx);
-	one_page_table_init(pmd + pmd_idx);
+	pmd = populate_extra_pmd(vaddr);
+	return one_page_table_init(pmd) + pte_idx;
 }
 
 static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 7f91e2cdc4c..7d4e76da336 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -168,34 +168,51 @@ static __ref void *spp_getpage(void)
 	return ptr;
 }
 
-void
-set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte)
+static pud_t * __init fill_pud(pgd_t *pgd, unsigned long vaddr)
 {
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
+	if (pgd_none(*pgd)) {
+		pud_t *pud = (pud_t *)spp_getpage();
+		pgd_populate(&init_mm, pgd, pud);
+		if (pud != pud_offset(pgd, 0))
+			printk(KERN_ERR "PAGETABLE BUG #00! %p <-> %p\n",
+			       pud, pud_offset(pgd, 0));
+	}
+	return pud_offset(pgd, vaddr);
+}
 
-	pud = pud_page + pud_index(vaddr);
+static pmd_t * __init fill_pmd(pud_t *pud, unsigned long vaddr)
+{
 	if (pud_none(*pud)) {
-		pmd = (pmd_t *) spp_getpage();
+		pmd_t *pmd = (pmd_t *) spp_getpage();
 		pud_populate(&init_mm, pud, pmd);
-		if (pmd != pmd_offset(pud, 0)) {
+		if (pmd != pmd_offset(pud, 0))
 			printk(KERN_ERR "PAGETABLE BUG #01! %p <-> %p\n",
-				pmd, pmd_offset(pud, 0));
-			return;
-		}
+			       pmd, pmd_offset(pud, 0));
 	}
-	pmd = pmd_offset(pud, vaddr);
+	return pmd_offset(pud, vaddr);
+}
+
+static pte_t * __init fill_pte(pmd_t *pmd, unsigned long vaddr)
+{
 	if (pmd_none(*pmd)) {
-		pte = (pte_t *) spp_getpage();
+		pte_t *pte = (pte_t *) spp_getpage();
 		pmd_populate_kernel(&init_mm, pmd, pte);
-		if (pte != pte_offset_kernel(pmd, 0)) {
+		if (pte != pte_offset_kernel(pmd, 0))
 			printk(KERN_ERR "PAGETABLE BUG #02!\n");
-			return;
-		}
 	}
+	return pte_offset_kernel(pmd, vaddr);
+}
+
+void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	pud = pud_page + pud_index(vaddr);
+	pmd = fill_pmd(pud, vaddr);
+	pte = fill_pte(pmd, vaddr);
 
-	pte = pte_offset_kernel(pmd, vaddr);
 	set_pte(pte, new_pte);
 
 	/*
@@ -205,8 +222,7 @@ set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte)
 	__flush_tlb_one(vaddr);
 }
 
-void
-set_pte_vaddr(unsigned long vaddr, pte_t pteval)
+void set_pte_vaddr(unsigned long vaddr, pte_t pteval)
 {
 	pgd_t *pgd;
 	pud_t *pud_page;
@@ -223,23 +239,22 @@ set_pte_vaddr(unsigned long vaddr, pte_t pteval)
 	set_pte_vaddr_pud(pud_page, vaddr, pteval);
 }
 
-void __init populate_extra_pte(unsigned long vaddr)
+pmd_t * __init populate_extra_pmd(unsigned long vaddr)
 {
 	pgd_t *pgd;
 	pud_t *pud;
 
 	pgd = pgd_offset_k(vaddr);
-	if (pgd_none(*pgd)) {
-		pud = (pud_t *)spp_getpage();
-		pgd_populate(&init_mm, pgd, pud);
-		if (pud != pud_offset(pgd, 0)) {
-			printk(KERN_ERR "PAGETABLE BUG #00! %p <-> %p\n",
-			       pud, pud_offset(pgd, 0));
-			return;
-		}
-	}
+	pud = fill_pud(pgd, vaddr);
+	return fill_pmd(pud, vaddr);
+}
+
+pte_t * __init populate_extra_pte(unsigned long vaddr)
+{
+	pmd_t *pmd;
 
-	set_pte_vaddr_pud((pud_t *)pgd_page_vaddr(*pgd), vaddr, __pte(0));
+	pmd = populate_extra_pmd(vaddr);
+	return fill_pte(pmd, vaddr);
 }
 
 /*
-- 
cgit v1.2.3


From 8d408b4be37bc49c9086531f2ebe411cf5731746 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:21 +0900
Subject: percpu: give more latitude to arch specific first chunk
 initialization

Impact: more latitude for first percpu chunk allocation

The first percpu chunk serves the kernel static percpu area and may or
may not contain extra room for further dynamic allocation.
Initialization of the first chunk needs to be done before normal
memory allocation service is up, so it has its own init path -
pcpu_setup_static().

It seems archs need more latitude while initializing the first chunk
for example to take advantage of large page mapping.  This patch makes
the following changes to allow this.

* Define PERCPU_DYNAMIC_RESERVE to give arch hint about how much space
  to reserve in the first chunk for further dynamic allocation.

* Rename pcpu_setup_static() to pcpu_setup_first_chunk().

* Make pcpu_setup_first_chunk() much more flexible by fetching page
  pointer by callback and adding optional @unit_size, @free_size and
  @base_addr arguments which allow archs to selectively part of chunk
  initialization to their likings.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 671e6528a82..d928e888720 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -41,6 +41,16 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
+static struct page **pcpu4k_pages __initdata;
+static int pcpu4k_nr_static_pages __initdata;
+
+static struct page * __init pcpu4k_get_page(unsigned int cpu, int pageno)
+{
+	if (pageno < pcpu4k_nr_static_pages)
+		return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno];
+	return NULL;
+}
+
 static void __init pcpu4k_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
@@ -109,7 +119,10 @@ void __init setup_per_cpu_areas(void)
 		}
 	}
 
-	pcpu_unit_size = pcpu_setup_static(pcpu4k_populate_pte, pages, size);
+	pcpu4k_pages = pages;
+	pcpu4k_nr_static_pages = nr_cpu_pages;
+	pcpu_unit_size = pcpu_setup_first_chunk(pcpu4k_get_page, size, 0, 0,
+						NULL, pcpu4k_populate_pte);
 
 	free_bootmem(__pa(pages), pages_size);
 
-- 
cgit v1.2.3


From 5f5d8405d1c50f5cf7e1dbfe9c9b44e2f015c8fd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:21 +0900
Subject: x86: separate out setup_pcpu_4k() from setup_per_cpu_areas()

Impact: modularize percpu first chunk allocation

x86 is gonna have a few different strategies for the first chunk
allocation.  Modularize it by separating out the current allocation
mechanism into pcpu_alloc_bootmem() and setup_pcpu_4k().

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 144 +++++++++++++++++++++++++++++------------
 1 file changed, 102 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index d928e888720..4a17c96f4f6 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -7,6 +7,7 @@
 #include <linux/crash_dump.h>
 #include <linux/smp.h>
 #include <linux/topology.h>
+#include <linux/pfn.h>
 #include <asm/sections.h>
 #include <asm/processor.h>
 #include <asm/setup.h>
@@ -41,6 +42,52 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
+/**
+ * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
+ * @cpu: cpu to allocate for
+ * @size: size allocation in bytes
+ * @align: alignment
+ *
+ * Allocate @size bytes aligned at @align for cpu @cpu.  This wrapper
+ * does the right thing for NUMA regardless of the current
+ * configuration.
+ *
+ * RETURNS:
+ * Pointer to the allocated area on success, NULL on failure.
+ */
+static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
+					unsigned long align)
+{
+	const unsigned long goal = __pa(MAX_DMA_ADDRESS);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	int node = early_cpu_to_node(cpu);
+	void *ptr;
+
+	if (!node_online(node) || !NODE_DATA(node)) {
+		ptr = __alloc_bootmem_nopanic(size, align, goal);
+		pr_info("cpu %d has no node %d or node-local memory\n",
+			cpu, node);
+		pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n",
+			 cpu, size, __pa(ptr));
+	} else {
+		ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node),
+						   size, align, goal);
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
+			 "%016lx\n", cpu, size, node, __pa(ptr));
+	}
+	return ptr;
+#else
+	return __alloc_bootmem_nopanic(size, align, goal);
+#endif
+}
+
+/*
+ * 4k page allocator
+ *
+ * This is the basic allocator.  Static percpu area is allocated
+ * page-by-page and most of initialization is done by the generic
+ * setup function.
+ */
 static struct page **pcpu4k_pages __initdata;
 static int pcpu4k_nr_static_pages __initdata;
 
@@ -56,6 +103,51 @@ static void __init pcpu4k_populate_pte(unsigned long addr)
 	populate_extra_pte(addr);
 }
 
+static ssize_t __init setup_pcpu_4k(size_t static_size)
+{
+	size_t pages_size;
+	unsigned int cpu;
+	int i, j;
+	ssize_t ret;
+
+	pcpu4k_nr_static_pages = PFN_UP(static_size);
+
+	/* unaligned allocations can't be freed, round up to page size */
+	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
+			       * sizeof(pcpu4k_pages[0]));
+	pcpu4k_pages = alloc_bootmem(pages_size);
+
+	/* allocate and copy */
+	j = 0;
+	for_each_possible_cpu(cpu)
+		for (i = 0; i < pcpu4k_nr_static_pages; i++) {
+			void *ptr;
+
+			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
+			if (!ptr)
+				goto enomem;
+
+			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
+			pcpu4k_pages[j++] = virt_to_page(ptr);
+		}
+
+	/* we're ready, commit */
+	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
+		pcpu4k_nr_static_pages, static_size);
+
+	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, 0, 0, NULL,
+				     pcpu4k_populate_pte);
+	goto out_free_ar;
+
+enomem:
+	while (--j >= 0)
+		free_bootmem(__pa(page_address(pcpu4k_pages[j])), PAGE_SIZE);
+	ret = -ENOMEM;
+out_free_ar:
+	free_bootmem(__pa(pcpu4k_pages), pages_size);
+	return ret;
+}
+
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -76,56 +168,24 @@ static inline void setup_percpu_segment(int cpu)
  */
 void __init setup_per_cpu_areas(void)
 {
-	ssize_t size = __per_cpu_end - __per_cpu_start;
-	unsigned int nr_cpu_pages = DIV_ROUND_UP(size, PAGE_SIZE);
-	static struct page **pages;
-	size_t pages_size;
-	unsigned int cpu, i, j;
+	size_t static_size = __per_cpu_end - __per_cpu_start;
+	unsigned int cpu;
 	unsigned long delta;
 	size_t pcpu_unit_size;
+	ssize_t ret;
 
 	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
-	pr_info("PERCPU: Allocating %zd bytes for static per cpu data\n", size);
-
-	pages_size = nr_cpu_pages * num_possible_cpus() * sizeof(pages[0]);
-	pages = alloc_bootmem(pages_size);
-
-	j = 0;
-	for_each_possible_cpu(cpu) {
-		void *ptr;
-
-		for (i = 0; i < nr_cpu_pages; i++) {
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-			ptr = alloc_bootmem_pages(PAGE_SIZE);
-#else
-			int node = early_cpu_to_node(cpu);
-
-			if (!node_online(node) || !NODE_DATA(node)) {
-				ptr = alloc_bootmem_pages(PAGE_SIZE);
-				pr_info("cpu %d has no node %d or node-local "
-					"memory\n", cpu, node);
-				pr_debug("per cpu data for cpu%d at %016lx\n",
-					 cpu, __pa(ptr));
-			} else {
-				ptr = alloc_bootmem_pages_node(NODE_DATA(node),
-							       PAGE_SIZE);
-				pr_debug("per cpu data for cpu%d on node%d "
-					 "at %016lx\n", cpu, node, __pa(ptr));
-			}
-#endif
-			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
-			pages[j++] = virt_to_page(ptr);
-		}
-	}
 
-	pcpu4k_pages = pages;
-	pcpu4k_nr_static_pages = nr_cpu_pages;
-	pcpu_unit_size = pcpu_setup_first_chunk(pcpu4k_get_page, size, 0, 0,
-						NULL, pcpu4k_populate_pte);
+	/* allocate percpu area */
+	ret = setup_pcpu_4k(static_size);
+	if (ret < 0)
+		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
+		      static_size, ret);
 
-	free_bootmem(__pa(pages), pages_size);
+	pcpu_unit_size = ret;
 
+	/* alrighty, percpu areas up and running */
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
 		per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
-- 
cgit v1.2.3


From 89c9215165ca609096e845926d9a18f1306176a4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:21 +0900
Subject: x86: add embedding percpu first chunk allocator

Impact: add better first percpu allocation for !NUMA

On !NUMA, we can simply allocate contiguous memory and use it for the
first chunk without mapping it into vmalloc area.  As the memory area
is covered by the large page physical memory mapping, it allows the
dynamic perpcu allocator to not add any TLB overhead for the static
percpu area and whatever falls into the first chunk and the
implementation is very simple too.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 86 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 4a17c96f4f6..fd4c399675d 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -42,6 +42,35 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
+/**
+ * pcpu_need_numa - determine percpu allocation needs to consider NUMA
+ *
+ * If NUMA is not configured or there is only one NUMA node available,
+ * there is no reason to consider NUMA.  This function determines
+ * whether percpu allocation should consider NUMA or not.
+ *
+ * RETURNS:
+ * true if NUMA should be considered; otherwise, false.
+ */
+static bool __init pcpu_need_numa(void)
+{
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	pg_data_t *last = NULL;
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu) {
+		int node = early_cpu_to_node(cpu);
+
+		if (node_online(node) && NODE_DATA(node) &&
+		    last && last != NODE_DATA(node))
+			return true;
+
+		last = NODE_DATA(node);
+	}
+#endif
+	return false;
+}
+
 /**
  * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
  * @cpu: cpu to allocate for
@@ -81,6 +110,59 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
+/*
+ * Embedding allocator
+ *
+ * The first chunk is sized to just contain the static area plus
+ * PERCPU_DYNAMIC_RESERVE and allocated as a contiguous area using
+ * bootmem allocator and used as-is without being mapped into vmalloc
+ * area.  This enables the first chunk to piggy back on the linear
+ * physical PMD mapping and doesn't add any additional pressure to
+ * TLB.
+ */
+static void *pcpue_ptr __initdata;
+static size_t pcpue_unit_size __initdata;
+
+static struct page * __init pcpue_get_page(unsigned int cpu, int pageno)
+{
+	return virt_to_page(pcpue_ptr + cpu * pcpue_unit_size
+			    + ((size_t)pageno << PAGE_SHIFT));
+}
+
+static ssize_t __init setup_pcpu_embed(size_t static_size)
+{
+	unsigned int cpu;
+
+	/*
+	 * If large page isn't supported, there's no benefit in doing
+	 * this.  Also, embedding allocation doesn't play well with
+	 * NUMA.
+	 */
+	if (!cpu_has_pse || pcpu_need_numa())
+		return -EINVAL;
+
+	/* allocate and copy */
+	pcpue_unit_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	pcpue_unit_size = max(pcpue_unit_size, PCPU_MIN_UNIT_SIZE);
+	pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
+				       PAGE_SIZE);
+	if (!pcpue_ptr)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu)
+		memcpy(pcpue_ptr + cpu * pcpue_unit_size, __per_cpu_load,
+		       static_size);
+
+	/* we're ready, commit */
+	pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n",
+		pcpue_unit_size >> PAGE_SHIFT, pcpue_ptr, static_size);
+
+	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
+				      pcpue_unit_size,
+				      pcpue_unit_size - static_size, pcpue_ptr,
+				      NULL);
+}
+
 /*
  * 4k page allocator
  *
@@ -178,7 +260,9 @@ void __init setup_per_cpu_areas(void)
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
 
 	/* allocate percpu area */
-	ret = setup_pcpu_4k(static_size);
+	ret = setup_pcpu_embed(static_size);
+	if (ret < 0)
+		ret = setup_pcpu_4k(static_size);
 	if (ret < 0)
 		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
 		      static_size, ret);
-- 
cgit v1.2.3


From 8ac837571491e239e64bd87863c1679d8002e8a2 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 24 Feb 2009 11:57:22 +0900
Subject: x86: add remapping percpu first chunk allocator

Impact: add better first percpu allocation for NUMA

On NUMA, embedding allocator can't be used as different units can't be
made to fall in the correct NUMA nodes.  To use large page mapping,
each unit needs to be remapped.  However, percpu areas are usually
much smaller than large page size and unused space hurts a lot as the
number of cpus grow.  This allocator remaps large pages for each chunk
but gives back unused part to the bootmem allocator making the large
pages mapped twice.

This adds slightly to the TLB pressure but is much better than using
4k mappings while still being NUMA-friendly.

Ingo suggested that this would be the correct approach for NUMA.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 137 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 135 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index fd4c399675d..2d946a8f78b 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -110,6 +110,133 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
+/*
+ * Remap allocator
+ *
+ * This allocator uses PMD page as unit.  A PMD page is allocated for
+ * each cpu and each is remapped into vmalloc area using PMD mapping.
+ * As PMD page is quite large, only part of it is used for the first
+ * chunk.  Unused part is returned to the bootmem allocator.
+ *
+ * So, the PMD pages are mapped twice - once to the physical mapping
+ * and to the vmalloc area for the first percpu chunk.  The double
+ * mapping does add one more PMD TLB entry pressure but still is much
+ * better than only using 4k mappings while still being NUMA friendly.
+ */
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+static size_t pcpur_size __initdata;
+static void **pcpur_ptrs __initdata;
+
+static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+{
+	size_t off = (size_t)pageno << PAGE_SHIFT;
+
+	if (off >= pcpur_size)
+		return NULL;
+
+	return virt_to_page(pcpur_ptrs[cpu] + off);
+}
+
+static ssize_t __init setup_pcpu_remap(size_t static_size)
+{
+	static struct vm_struct vm;
+	pg_data_t *last;
+	size_t ptrs_size;
+	unsigned int cpu;
+	ssize_t ret;
+
+	/*
+	 * If large page isn't supported, there's no benefit in doing
+	 * this.  Also, on non-NUMA, embedding is better.
+	 */
+	if (!cpu_has_pse || pcpu_need_numa())
+		return -EINVAL;
+
+	last = NULL;
+	for_each_possible_cpu(cpu) {
+		int node = early_cpu_to_node(cpu);
+
+		if (node_online(node) && NODE_DATA(node) &&
+		    last && last != NODE_DATA(node))
+			goto proceed;
+
+		last = NODE_DATA(node);
+	}
+	return -EINVAL;
+
+proceed:
+	/*
+	 * Currently supports only single page.  Supporting multiple
+	 * pages won't be too difficult if it ever becomes necessary.
+	 */
+	pcpur_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	if (pcpur_size > PMD_SIZE) {
+		pr_warning("PERCPU: static data is larger than large page, "
+			   "can't use large page\n");
+		return -EINVAL;
+	}
+
+	/* allocate pointer array and alloc large pages */
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+	pcpur_ptrs = alloc_bootmem(ptrs_size);
+
+	for_each_possible_cpu(cpu) {
+		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
+		if (!pcpur_ptrs[cpu])
+			goto enomem;
+
+		/*
+		 * Only use pcpur_size bytes and give back the rest.
+		 *
+		 * Ingo: The 2MB up-rounding bootmem is needed to make
+		 * sure the partial 2MB page is still fully RAM - it's
+		 * not well-specified to have a PAT-incompatible area
+		 * (unmapped RAM, device memory, etc.) in that hole.
+		 */
+		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
+			     PMD_SIZE - pcpur_size);
+
+		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+	}
+
+	/* allocate address and map */
+	vm.flags = VM_ALLOC;
+	vm.size = num_possible_cpus() * PMD_SIZE;
+	vm_area_register_early(&vm, PMD_SIZE);
+
+	for_each_possible_cpu(cpu) {
+		pmd_t *pmd;
+
+		pmd = populate_extra_pmd((unsigned long)vm.addr
+					 + cpu * PMD_SIZE);
+		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
+				     PAGE_KERNEL_LARGE));
+	}
+
+	/* we're ready, commit */
+	pr_info("PERCPU: Remapped at %p with large pages, static data "
+		"%zu bytes\n", vm.addr, static_size);
+
+	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, PMD_SIZE,
+				     pcpur_size - static_size, vm.addr, NULL);
+	goto out_free_ar;
+
+enomem:
+	for_each_possible_cpu(cpu)
+		if (pcpur_ptrs[cpu])
+			free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
+	ret = -ENOMEM;
+out_free_ar:
+	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+	return ret;
+}
+#else
+static ssize_t __init setup_pcpu_remap(size_t static_size)
+{
+	return -EINVAL;
+}
+#endif
+
 /*
  * Embedding allocator
  *
@@ -259,8 +386,14 @@ void __init setup_per_cpu_areas(void)
 	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
 
-	/* allocate percpu area */
-	ret = setup_pcpu_embed(static_size);
+	/*
+	 * Allocate percpu area.  If PSE is supported, try to make use
+	 * of large page mappings.  Please read comments on top of
+	 * each allocator for details.
+	 */
+	ret = setup_pcpu_remap(static_size);
+	if (ret < 0)
+		ret = setup_pcpu_embed(static_size);
 	if (ret < 0)
 		ret = setup_pcpu_4k(static_size);
 	if (ret < 0)
-- 
cgit v1.2.3


From 30d697fa3a25fed809a873b17531a00282dc1234 Mon Sep 17 00:00:00 2001
From: Salman Qazi <sqazi@google.com>
Date: Mon, 23 Feb 2009 18:03:04 -0800
Subject: x86: fix performance regression in write() syscall

While the introduction of __copy_from_user_nocache (see commit:
0812a579c92fefa57506821fa08e90f47cb6dbdd) may have been an improvement
for sufficiently large writes, there is evidence to show that it is
deterimental for small writes.  Unixbench's fstime test gives the
following results for 256 byte writes with MAX_BLOCK of 2000:

    2.6.29-rc6 ( 5 samples, each in KB/sec ):
    283750, 295200, 294500, 293000, 293300

    2.6.29-rc6 + this patch (5 samples, each in KB/sec):
    313050, 3106750, 293350, 306300, 307900

    2.6.18
    395700, 342000, 399100, 366050, 359850

    See w_test() in src/fstime.c in unixbench version 4.1.0.  Basically, the above test
    consists of counting how much we can write in this manner:

    alarm(10);
    while (!sigalarm) {
            for (f_blocks = 0; f_blocks < 2000; ++f_blocks) {
                   write(f, buf, 256);
            }
            lseek(f, 0L, 0);
    }

Note, there are other components to the write syscall regression
that are not addressed here.

Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess_64.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 84210c479fc..987a2c10fe2 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -192,14 +192,26 @@ static inline int __copy_from_user_nocache(void *dst, const void __user *src,
 					   unsigned size)
 {
 	might_sleep();
-	return __copy_user_nocache(dst, src, size, 1);
+	/*
+	 * In practice this limit means that large file write()s
+	 * which get chunked to 4K copies get handled via
+	 * non-temporal stores here. Smaller writes get handled
+	 * via regular __copy_from_user():
+	 */
+	if (likely(size >= PAGE_SIZE))
+		return __copy_user_nocache(dst, src, size, 1);
+	else
+		return __copy_from_user(dst, src, size);
 }
 
 static inline int __copy_from_user_inatomic_nocache(void *dst,
 						    const void __user *src,
 						    unsigned size)
 {
-	return __copy_user_nocache(dst, src, size, 0);
+	if (likely(size >= PAGE_SIZE))
+		return __copy_user_nocache(dst, src, size, 0);
+	else
+		return __copy_from_user_inatomic(dst, src, size);
 }
 
 unsigned long
-- 
cgit v1.2.3


From 2a0b1001116de51f13b2969a9a52bd2bc294644f Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Mon, 23 Feb 2009 22:56:57 +0300
Subject: x86: head_64.S - remove useless balign

Impact: cleanup

NEXT_PAGE already has 'balign' so no
need to keep this redundant one.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/head_64.S | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2e648e3a5ea..52c9af429dd 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -329,8 +329,6 @@ early_idt_ripmsg:
 #endif /* CONFIG_EARLY_PRINTK */
 	.previous
 
-.balign PAGE_SIZE
-
 #define NEXT_PAGE(name) \
 	.balign	PAGE_SIZE; \
 ENTRY(name)
-- 
cgit v1.2.3


From 5e112ae23b404ccba0a61630b82ec44f0d084880 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Mon, 23 Feb 2009 22:56:58 +0300
Subject: x86: head_64.S - use IDT_ENTRIES instead of hardcoded number

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/head_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 52c9af429dd..54b29bb24e7 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -417,7 +417,7 @@ ENTRY(phys_base)
 	.section .bss, "aw", @nobits
 	.align L1_CACHE_BYTES
 ENTRY(idt_table)
-	.skip 256 * 16
+	.skip IDT_ENTRIES * 16
 
 	.section .bss.page_aligned, "aw", @nobits
 	.align PAGE_SIZE
-- 
cgit v1.2.3


From 57e372932cec8eb141cde039aaeaa91b69fceba2 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Mon, 23 Feb 2009 22:56:59 +0300
Subject: x86: invalid_vm86_irq -- use predefined macros

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/irq_vectors.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index b07278c55e9..8a285f356f8 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -128,7 +128,7 @@
 #ifndef __ASSEMBLY__
 static inline int invalid_vm86_irq(int irq)
 {
-	return irq < 3 || irq > 15;
+	return irq < FIRST_VM86_IRQ || irq > LAST_VM86_IRQ;
 }
 #endif
 
-- 
cgit v1.2.3


From b3baaa138cd4223bffb6ca64b873d25cfb1d7c70 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Mon, 23 Feb 2009 22:57:00 +0300
Subject: x86: entry_64.S - add missing ENDPROC

native_usergs_sysret64 is described as

	extern void native_usergs_sysret64(void)

so lets add ENDPROC here

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_64.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index fbcf96b295f..7cf8d798042 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -188,6 +188,7 @@ return_to_handler:
 ENTRY(native_usergs_sysret64)
 	swapgs
 	sysretq
+ENDPROC(native_usergs_sysret64)
 #endif /* CONFIG_PARAVIRT */
 
 
-- 
cgit v1.2.3


From bc8b2b9258488b932cd399112e01d5afffc4ee96 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Mon, 23 Feb 2009 22:57:01 +0300
Subject: x86: head_64.S - use GLOBAL macro

Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_64.S | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 7cf8d798042..8a6c7c63885 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -77,20 +77,17 @@ ENTRY(ftrace_caller)
 	movq 8(%rbp), %rsi
 	subq $MCOUNT_INSN_SIZE, %rdi
 
-.globl ftrace_call
-ftrace_call:
+GLOBAL(ftrace_call)
 	call ftrace_stub
 
 	MCOUNT_RESTORE_FRAME
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-.globl ftrace_graph_call
-ftrace_graph_call:
+GLOBAL(ftrace_graph_call)
 	jmp ftrace_stub
 #endif
 
-.globl ftrace_stub
-ftrace_stub:
+GLOBAL(ftrace_stub)
 	retq
 END(ftrace_caller)
 
@@ -110,8 +107,7 @@ ENTRY(mcount)
 	jnz ftrace_graph_caller
 #endif
 
-.globl ftrace_stub
-ftrace_stub:
+GLOBAL(ftrace_stub)
 	retq
 
 trace:
@@ -148,9 +144,7 @@ ENTRY(ftrace_graph_caller)
 	retq
 END(ftrace_graph_caller)
 
-
-.globl return_to_handler
-return_to_handler:
+GLOBAL(return_to_handler)
 	subq  $80, %rsp
 
 	movq %rax, (%rsp)
@@ -634,16 +628,14 @@ tracesys:
  * Syscall return path ending with IRET.
  * Has correct top of stack, but partial stack frame.
  */
-	.globl int_ret_from_sys_call
-	.globl int_with_check
-int_ret_from_sys_call:
+GLOBAL(int_ret_from_sys_call)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl $3,CS-ARGOFFSET(%rsp)
 	je retint_restore_args
 	movl $_TIF_ALLWORK_MASK,%edi
 	/* edi:	mask to check */
-int_with_check:
+GLOBAL(int_with_check)
 	LOCKDEP_SYS_EXIT_IRQ
 	GET_THREAD_INFO(%rcx)
 	movl TI_flags(%rcx),%edx
-- 
cgit v1.2.3


From 9f331119a4f95a44d918fe6d5e85998fabf99b72 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Mon, 23 Feb 2009 22:57:02 +0300
Subject: x86: efi_stub_32,64 - add missing ENDPROCs

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/efi_stub_32.S | 1 +
 arch/x86/kernel/efi_stub_64.S | 7 +++++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/efi_stub_32.S b/arch/x86/kernel/efi_stub_32.S
index ef00bb77d7e..a206b946929 100644
--- a/arch/x86/kernel/efi_stub_32.S
+++ b/arch/x86/kernel/efi_stub_32.S
@@ -113,6 +113,7 @@ ENTRY(efi_call_phys)
 	movl	(%edx), %ecx
 	pushl	%ecx
 	ret
+ENDPROC(efi_call_phys)
 .previous
 
 .data
diff --git a/arch/x86/kernel/efi_stub_64.S b/arch/x86/kernel/efi_stub_64.S
index 99b47d48c9f..4c07ccab814 100644
--- a/arch/x86/kernel/efi_stub_64.S
+++ b/arch/x86/kernel/efi_stub_64.S
@@ -41,6 +41,7 @@ ENTRY(efi_call0)
 	addq $32, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call0)
 
 ENTRY(efi_call1)
 	SAVE_XMM
@@ -50,6 +51,7 @@ ENTRY(efi_call1)
 	addq $32, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call1)
 
 ENTRY(efi_call2)
 	SAVE_XMM
@@ -59,6 +61,7 @@ ENTRY(efi_call2)
 	addq $32, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call2)
 
 ENTRY(efi_call3)
 	SAVE_XMM
@@ -69,6 +72,7 @@ ENTRY(efi_call3)
 	addq $32, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call3)
 
 ENTRY(efi_call4)
 	SAVE_XMM
@@ -80,6 +84,7 @@ ENTRY(efi_call4)
 	addq $32, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call4)
 
 ENTRY(efi_call5)
 	SAVE_XMM
@@ -92,6 +97,7 @@ ENTRY(efi_call5)
 	addq $48, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call5)
 
 ENTRY(efi_call6)
 	SAVE_XMM
@@ -107,3 +113,4 @@ ENTRY(efi_call6)
 	addq $48, %rsp
 	RESTORE_XMM
 	ret
+ENDPROC(efi_call6)
-- 
cgit v1.2.3


From 10b614eaa847447c2c8646030728309d14bd2d05 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 24 Feb 2009 21:41:32 +0100
Subject: x86_32: summit_32, use BAD_APICID

Use BAD_APICID instead of 0xFF constants in summit_cpu_mask_to_apicid.

Also remove bogus comments about what we actually return.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/summit_32.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index cfe7b09015d..d02f4385707 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -303,12 +303,10 @@ static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 	int cpu;
 
 	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
 	if (num_bits_set >= nr_cpu_ids)
-		return 0xFF;
+		return BAD_APICID;
 	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
+	 * The cpus in the mask must all be on the apic cluster.
 	 */
 	cpu = first_cpu(*cpumask);
 	apicid = summit_cpu_to_logical_apicid(cpu);
@@ -318,9 +316,9 @@ static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 			int new_apicid = summit_cpu_to_logical_apicid(cpu);
 
 			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk ("%s: Not a valid mask!\n", __func__);
+				printk("%s: Not a valid mask!\n", __func__);
 
-				return 0xFF;
+				return BAD_APICID;
 			}
 			apicid = apicid | new_apicid;
 			cpus_found++;
-- 
cgit v1.2.3


From b5f26d05565d070b7b352dba56b1f96e10021980 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 24 Feb 2009 21:41:33 +0100
Subject: x86_32: summit_32, de-inline functions

The ones which go only into struct genapic are de-inlined
by compiler anyway, so remove the inline specifier from them.

Afterwards, remove summit_setup_portio_remap completely as it
is unused.

Remove inline also from summit_cpu_mask_to_apicid, since it's
not worth it (it is used in struct genapic too).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/summit_32.c | 47 +++++++++++++++++-----------------------
 1 file changed, 20 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index d02f4385707..32838b57a94 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -48,7 +48,7 @@
 #include <linux/gfp.h>
 #include <linux/smp.h>
 
-static inline unsigned summit_get_apic_id(unsigned long x)
+static unsigned summit_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0xFF;
 }
@@ -58,7 +58,7 @@ static inline void summit_send_IPI_mask(const cpumask_t *mask, int vector)
 	default_send_IPI_mask_sequence_logical(mask, vector);
 }
 
-static inline void summit_send_IPI_allbutself(int vector)
+static void summit_send_IPI_allbutself(int vector)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
@@ -67,7 +67,7 @@ static inline void summit_send_IPI_allbutself(int vector)
 		summit_send_IPI_mask(&mask, vector);
 }
 
-static inline void summit_send_IPI_all(int vector)
+static void summit_send_IPI_all(int vector)
 {
 	summit_send_IPI_mask(&cpu_online_map, vector);
 }
@@ -82,8 +82,8 @@ extern void setup_summit(void);
 #define setup_summit()	{}
 #endif
 
-static inline int
-summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+static int summit_mps_oem_check(struct mpc_table *mpc, char *oem,
+		char *productid)
 {
 	if (!strncmp(oem, "IBM ENSW", 8) &&
 			(!strncmp(productid, "VIGIL SMP", 9)
@@ -98,7 +98,7 @@ summit_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 }
 
 /* Hook from generic ACPI tables.c */
-static inline int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strncmp(oem_id, "IBM", 3) &&
 	    (!strncmp(oem_table_id, "SERVIGIL", 8)
@@ -186,7 +186,7 @@ static inline int is_WPEG(struct rio_detail *rio){
 
 #define SUMMIT_APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
 
-static inline const cpumask_t *summit_target_cpus(void)
+static const cpumask_t *summit_target_cpus(void)
 {
 	/* CPU_MASK_ALL (0xff) has undefined behaviour with
 	 * dest_LowestPrio mode logical clustered apic interrupt routing
@@ -195,19 +195,18 @@ static inline const cpumask_t *summit_target_cpus(void)
 	return &cpumask_of_cpu(0);
 }
 
-static inline unsigned long
-summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long summit_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return 0;
 }
 
 /* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long summit_check_apicid_present(int bit)
+static unsigned long summit_check_apicid_present(int bit)
 {
 	return 1;
 }
 
-static inline void summit_init_apic_ldr(void)
+static void summit_init_apic_ldr(void)
 {
 	unsigned long val, id;
 	int count = 0;
@@ -234,18 +233,18 @@ static inline void summit_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline int summit_apic_id_registered(void)
+static int summit_apic_id_registered(void)
 {
 	return 1;
 }
 
-static inline void summit_setup_apic_routing(void)
+static void summit_setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
 						nr_ioapics);
 }
 
-static inline int summit_apicid_to_node(int logical_apicid)
+static int summit_apicid_to_node(int logical_apicid)
 {
 #ifdef CONFIG_SMP
 	return apicid_2_node[hard_smp_processor_id()];
@@ -266,7 +265,7 @@ static inline int summit_cpu_to_logical_apicid(int cpu)
 #endif
 }
 
-static inline int summit_cpu_present_to_apicid(int mps_cpu)
+static int summit_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < nr_cpu_ids)
 		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
@@ -274,28 +273,23 @@ static inline int summit_cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static inline physid_mask_t
-summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+static physid_mask_t summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
 	return physids_promote(0x0F);
 }
 
-static inline physid_mask_t summit_apicid_to_cpu_present(int apicid)
+static physid_mask_t summit_apicid_to_cpu_present(int apicid)
 {
 	return physid_mask_of_physid(0);
 }
 
-static inline void summit_setup_portio_remap(void)
-{
-}
-
-static inline int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
+static int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
 	return 1;
 }
 
-static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
+static unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
 	int cpus_found = 0;
 	int num_bits_set;
@@ -328,8 +322,7 @@ static inline unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 	return apicid;
 }
 
-static inline unsigned int
-summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
+static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
 			      const struct cpumask *andmask)
 {
 	int apicid = summit_cpu_to_logical_apicid(0);
@@ -354,7 +347,7 @@ summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
  *
  * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
  */
-static inline int summit_phys_pkg_id(int cpuid_apic, int index_msb)
+static int summit_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return hard_smp_processor_id() >> index_msb;
 }
-- 
cgit v1.2.3


From 46cb27f5169d37be38be8e5729b9a0100e989fa8 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Tue, 24 Feb 2009 13:12:43 -0800
Subject: x86: check range in reserve_early()

Impact: cleanup

one 32-bit system reports:

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.0 present.
last_pfn = 0x1c000 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1c000000 @ 7000-c000
..
RAMDISK: 1bc69000 - 1bfef4fa
..
0MB HIGHMEM available.
448MB LOWMEM available.
  mapped low ram: 0 - 1c000000
  low ram: 00000000 - 1c000000
  bootmap 00002000 - 00005800
(9 early reservations) ==> bootmem [0000000000 - 001c000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 00009ed14c]    TEXT DATA BSS ==> [0000400000 - 00009ed14c]
  #4 [001bc69000 - 001bfef4fa]          RAMDISK ==> [001bc69000 - 001bfef4fa]
  #5 [00009ee000 - 00009f2000]    INIT_PG_TABLE ==> [00009ee000 - 00009f2000]
  #6 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #7 [0000007000 - 0000007000]          PGTABLE
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]

Notice the strange blank PGTABLE entry.

The reason is init_pg_table is big enough, and zero range is called
with init_memory_mapping/reserve_early().

So try to check the range in reserve_early()

v2: fix the reversed compare

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: nickpiggin@yahoo.com.au
Cc: ink@jurassic.park.msu.ru
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/e820.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index e85826829cf..508bec1cee2 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -858,6 +858,9 @@ void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)
  */
 void __init reserve_early(u64 start, u64 end, char *name)
 {
+	if (start >= end)
+		return;
+
 	drop_overlaps_that_are_ok(start, end);
 	__reserve_early(start, end, name, 0);
 }
-- 
cgit v1.2.3


From 1250fbed1471b681f3e75e4938f356a1c0a92d5e Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 12 Feb 2009 13:43:20 +0100
Subject: x86, mce: enable machine checks in 64-bit defconfig

Impact: defconfig change

Enable MCE in the 64-bit defconfig.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/configs/x86_64_defconfig | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 10728fd91c6..9fd7d156a12 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.29-rc4
-# Thu Feb 12 12:57:29 2009
+# Tue Feb 24 15:44:16 2009
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
@@ -268,7 +268,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
 CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
 # CONFIG_I8K is not set
 CONFIG_MICROCODE=y
 CONFIG_MICROCODE_INTEL=y
-- 
cgit v1.2.3


From 15d4fcd615989ed83fe848e6a3c7e9f0361cf0d0 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 24 Feb 2009 15:52:58 -0800
Subject: x86, mce: enable machine checks in 32-bit defconfig

Impact: defconfig change

Enable MCE in the 32-bit defconfig.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/configs/i386_defconfig | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 8f40a80ccb5..c2cae417fab 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.29-rc4
-# Thu Feb 12 12:57:57 2009
+# Tue Feb 24 15:50:58 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -268,7 +268,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
 CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_NONFATAL=y
+CONFIG_X86_MCE_P4THERMAL=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
-- 
cgit v1.2.3


From 24ff954233ecfd45801383f831626f88937ebe6f Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 25 Feb 2009 10:38:10 +0900
Subject: x86, percpu: fix minor bugs in setup_percpu.c

Recent changes in setup_percpu.c made a now meaningless DBG()
statement fail to compile and introduced a
comparison-of-different-types warning.  Fix them.

Compile failure is reported by Ingo Molnar.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 2d946a8f78b..c29f301d388 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -270,7 +270,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 
 	/* allocate and copy */
 	pcpue_unit_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
-	pcpue_unit_size = max(pcpue_unit_size, PCPU_MIN_UNIT_SIZE);
+	pcpue_unit_size = max_t(size_t, pcpue_unit_size, PCPU_MIN_UNIT_SIZE);
 	pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
 				       PAGE_SIZE);
 	if (!pcpue_ptr)
@@ -438,8 +438,6 @@ void __init setup_per_cpu_areas(void)
 		 */
 		if (cpu == boot_cpu_id)
 			switch_to_new_gdt(cpu);
-
-		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
 
 	/* indicate the early static arrays will soon be gone */
-- 
cgit v1.2.3


From d325100504f1d0c296a1fbfef558deaa655e2240 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 25 Feb 2009 11:01:40 +0900
Subject: x86: convert cacheflush macros inline functions

Impact: cleanup

Unused macro parameters cause spurious unused variable warnings.
Convert all cacheflush macros to inline functions to avoid the
warnings and achieve better type checking.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/cacheflush.h | 53 ++++++++++++++++++++++++++-------------
 1 file changed, 36 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index 2f8466540fb..5b301b7ff5f 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -5,24 +5,43 @@
 #include <linux/mm.h>
 
 /* Caches aren't brain-dead on the intel. */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma, pg)		do { } while (0)
-#define flush_icache_user_range(vma, pg, adr, len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
+static inline void flush_cache_all(void) { }
+static inline void flush_cache_mm(struct mm_struct *mm) { }
+static inline void flush_cache_dup_mm(struct mm_struct *mm) { }
+static inline void flush_cache_range(struct vm_area_struct *vma,
+				     unsigned long start, unsigned long end) { }
+static inline void flush_cache_page(struct vm_area_struct *vma,
+				    unsigned long vmaddr, unsigned long pfn) { }
+static inline void flush_dcache_page(struct page *page) { }
+static inline void flush_dcache_mmap_lock(struct address_space *mapping) { }
+static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { }
+static inline void flush_icache_range(unsigned long start,
+				      unsigned long end) { }
+static inline void flush_icache_page(struct vm_area_struct *vma,
+				     struct page *page) { }
+static inline void flush_icache_user_range(struct vm_area_struct *vma,
+					   struct page *page,
+					   unsigned long addr,
+					   unsigned long len) { }
+static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
+static inline void flush_cache_vunmap(unsigned long start,
+				      unsigned long end) { }
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
-	memcpy((dst), (src), (len))
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	memcpy((dst), (src), (len))
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+				     struct page *page, unsigned long vaddr,
+				     void *dst, const void *src,
+				     unsigned long len)
+{
+	memcpy(dst, src, len);
+}
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+				       struct page *page, unsigned long vaddr,
+				       void *dst, const void *src,
+				       unsigned long len)
+{
+	memcpy(dst, src, len);
+}
 
 #define PG_non_WB				PG_arch_1
 PAGEFLAG(NonWB, non_WB)
-- 
cgit v1.2.3


From fff78ad5cee1d6f695103ec590cbd2a9f3c39e8c Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 22:28:42 -0500
Subject: [CPUFREQ] Stupidly trivial CodingStyle fix

GNU indent complains about this being ambiguous, because it's dumb.
One of my automated tests relies on the output of indent, so this shuts
it up.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index 1b446d79a8f..9cd73d15743 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -94,7 +94,7 @@ static struct cpufreq_frequency_table *powernow_table;
 
 static unsigned int can_scale_bus;
 static unsigned int can_scale_vid;
-static unsigned int minimum_speed=-1;
+static unsigned int minimum_speed = -1;
 static unsigned int maximum_speed;
 static unsigned int number_scales;
 static unsigned int fsb;
-- 
cgit v1.2.3


From b5c916666240032b29f73a1ca52c3e0fac37335c Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 22:39:47 -0500
Subject: [CPUFREQ] checkpatch cleanups for cpufreq-nforce2

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 38 +++++++++++++++------------
 1 file changed, 21 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 965ea52767a..ad8284f0e86 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -32,7 +32,7 @@
  * nforce2_chipset:
  * FSB is changed using the chipset
  */
-static struct pci_dev *nforce2_chipset_dev;
+static struct pci_dev *nforce2_dev;
 
 /* fid:
  * multiplier * 10
@@ -56,7 +56,8 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
 		"Minimum FSB to use, if not defined: current FSB - 50");
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"cpufreq-nforce2", msg)
 
 /**
  * nforce2_calc_fsb - calculate FSB
@@ -118,11 +119,11 @@ static void nforce2_write_pll(int pll)
 	int temp;
 
 	/* Set the pll addr. to 0x00 */
-	pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0);
+	pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0);
 
 	/* Now write the value in all 64 registers */
 	for (temp = 0; temp <= 0x3f; temp++)
-		pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll);
+		pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll);
 
 	return;
 }
@@ -139,8 +140,8 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 	u32 fsb, temp = 0;
 
 	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
-	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-						0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL);
+	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF,
+				PCI_ANY_ID, PCI_ANY_ID, NULL);
 	if (!nforce2_sub5)
 		return 0;
 
@@ -148,13 +149,13 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 	fsb /= 1000000;
 
 	/* Check if PLL register is already set */
-	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 
 	if (bootfsb || !temp)
 		return fsb;
 
 	/* Use PLL register FSB value */
-	pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp);
+	pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp);
 	fsb = nforce2_calc_fsb(temp);
 
 	return fsb;
@@ -185,7 +186,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 	}
 
 	/* First write? Then set actual value */
-	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 	if (!temp) {
 		pll = nforce2_calc_pll(tfsb);
 
@@ -197,7 +198,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 
 	/* Enable write access */
 	temp = 0x01;
-	pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp);
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp);
 
 	diff = tfsb - fsb;
 
@@ -222,7 +223,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 	}
 
 	temp = 0x40;
-	pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp);
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp);
 
 	return 0;
 }
@@ -244,7 +245,8 @@ static unsigned int nforce2_get(unsigned int cpu)
  * nforce2_target - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
@@ -328,7 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	if (!fid) {
 		if (!cpu_khz) {
 			printk(KERN_WARNING
-			       "cpufreq: cpu_khz not set, can't calculate multiplier!\n");
+			       "cpufreq: cpu_khz not set, "
+			       "can't calculate multiplier!\n");
 			return -ENODEV;
 		}
 
@@ -392,17 +395,18 @@ static struct cpufreq_driver nforce2_driver = {
  */
 static unsigned int nforce2_detect_chipset(void)
 {
-	nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+	nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
 					PCI_DEVICE_ID_NVIDIA_NFORCE2,
 					PCI_ANY_ID, PCI_ANY_ID, NULL);
 
-	if (nforce2_chipset_dev == NULL)
+	if (nforce2_dev == NULL)
 		return -ENODEV;
 
 	printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
-	       nforce2_chipset_dev->revision);
+	       nforce2_dev->revision);
 	printk(KERN_INFO
-	       "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
+	       "cpufreq: FSB changing is maybe unstable and can lead to "
+	       "crashes and data loss.\n");
 
 	return 0;
 }
-- 
cgit v1.2.3


From 20174b65d9fdc8dddef3d2ab9647e01fdab13064 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 22:42:19 -0500
Subject: [CPUFREQ] nforce2: Use driver prefix, not cpufreq prefix.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index ad8284f0e86..99262906838 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -56,6 +56,7 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
 		"Minimum FSB to use, if not defined: current FSB - 50");
 
+#define PFX "cpufreq-nforce2: "
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
 		"cpufreq-nforce2", msg)
 
@@ -175,13 +176,13 @@ static int nforce2_set_fsb(unsigned int fsb)
 	int pll = 0;
 
 	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
-		printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
+		printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
 		return -EINVAL;
 	}
 
 	tfsb = nforce2_fsb_read(0);
 	if (!tfsb) {
-		printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
+		printk(KERN_ERR PFX "Error while reading the FSB\n");
 		return -EINVAL;
 	}
 
@@ -278,7 +279,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
-		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
+		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
 			target_fsb);
 	else
 		dprintk("Changed FSB successfully to %d\n",
@@ -329,9 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* FIX: Get FID from CPU */
 	if (!fid) {
 		if (!cpu_khz) {
-			printk(KERN_WARNING
-			       "cpufreq: cpu_khz not set, "
-			       "can't calculate multiplier!\n");
+			printk(KERN_WARNING PFX
+			"cpu_khz not set, can't calculate multiplier!\n");
 			return -ENODEV;
 		}
 
@@ -346,7 +346,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 		}
 	}
 
-	printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
+	printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
 	       fid / 10, fid % 10);
 
 	/* Set maximum FSB to FSB at boot time */
@@ -402,10 +402,10 @@ static unsigned int nforce2_detect_chipset(void)
 	if (nforce2_dev == NULL)
 		return -ENODEV;
 
-	printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
+	printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
 	       nforce2_dev->revision);
-	printk(KERN_INFO
-	       "cpufreq: FSB changing is maybe unstable and can lead to "
+	printk(KERN_INFO PFX
+	       "FSB changing is maybe unstable and can lead to "
 	       "crashes and data loss.\n");
 
 	return 0;
@@ -424,7 +424,7 @@ static int __init nforce2_init(void)
 
 	/* detect chipset */
 	if (nforce2_detect_chipset()) {
-		printk(KERN_ERR "cpufreq: No nForce2 chipset.\n");
+		printk(KERN_ERR PFX "No nForce2 chipset.\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3


From 04cd1a99dc22bcaa1eccbe8f8386df8c1295e979 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 22:50:33 -0500
Subject: [CPUFREQ] checkpatch cleanups for elanfreq

The remaining warning about the simple_strtoul conversion
to strict_strtoul seems kind of pointless to me.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/elanfreq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index fe613c93b36..006b278b0d5 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -184,7 +184,8 @@ static int elanfreq_target(struct cpufreq_policy *policy,
 {
 	unsigned int newstate = 0;
 
-	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	elanfreq_set_cpu_state(newstate);
@@ -301,7 +302,8 @@ static void __exit elanfreq_exit(void)
 module_param(max_freq, int, 0444);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
+		"Sven Geggus <sven@geggus.net>");
 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
 
 module_init(elanfreq_init);
-- 
cgit v1.2.3


From c9b8c871525aeda153494996d84a832270205d81 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 22:54:47 -0500
Subject: [CPUFREQ] checkpatch cleanups for e_powersaver

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/e_powersaver.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
index c2f930d8664..3f83ea12c47 100644
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
@@ -12,12 +12,12 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/msr.h>
 #include <asm/tsc.h>
-#include <asm/timex.h>
-#include <asm/io.h>
-#include <asm/delay.h>
 
 #define EPS_BRAND_C7M	0
 #define EPS_BRAND_C7	1
@@ -184,7 +184,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		break;
 	}
 
-	switch(brand) {
+	switch (brand) {
 	case EPS_BRAND_C7M:
 		printk(KERN_CONT "C7-M\n");
 		break;
@@ -218,17 +218,20 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	/* Print voltage and multiplier */
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	current_voltage = lo & 0xff;
-	printk(KERN_INFO "eps: Current voltage = %dmV\n", current_voltage * 16 + 700);
+	printk(KERN_INFO "eps: Current voltage = %dmV\n",
+			current_voltage * 16 + 700);
 	current_multiplier = (lo >> 8) & 0xff;
 	printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
 
 	/* Print limits */
 	max_voltage = hi & 0xff;
-	printk(KERN_INFO "eps: Highest voltage = %dmV\n", max_voltage * 16 + 700);
+	printk(KERN_INFO "eps: Highest voltage = %dmV\n",
+			max_voltage * 16 + 700);
 	max_multiplier = (hi >> 8) & 0xff;
 	printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
 	min_voltage = (hi >> 16) & 0xff;
-	printk(KERN_INFO "eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+	printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
+			min_voltage * 16 + 700);
 	min_multiplier = (hi >> 24) & 0xff;
 	printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
 
@@ -318,7 +321,7 @@ static int eps_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* eps_attr[] = {
+static struct freq_attr *eps_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -356,7 +359,7 @@ static void __exit eps_exit(void)
 	cpufreq_unregister_driver(&eps_driver);
 }
 
-MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>");
+MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
 MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
 MODULE_LICENSE("GPL");
 
-- 
cgit v1.2.3


From 00f6a235bf241e62dfadf32b4322309e65c7b177 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 23:06:57 -0500
Subject: [CPUFREQ] checkpatch cleanups for gx-suspmod

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/gx-suspmod.c | 105 +++++++++++++++++++------------
 1 file changed, 65 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index 9d9eae82e60..ac27ec2264d 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -79,8 +79,9 @@
 #include <linux/smp.h>
 #include <linux/cpufreq.h>
 #include <linux/pci.h>
+#include <linux/errno.h>
+
 #include <asm/processor-cyrix.h>
-#include <asm/errno.h>
 
 /* PCI config registers, all at F0 */
 #define PCI_PMER1	0x80	/* power management enable register 1 */
@@ -122,8 +123,8 @@ static struct gxfreq_params *gx_params;
 static int stock_freq;
 
 /* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
-static int pci_busclk = 0;
-module_param (pci_busclk, int, 0444);
+static int pci_busclk;
+module_param(pci_busclk, int, 0444);
 
 /* maximum duration for which the cpu may be suspended
  * (32us * MAX_DURATION). If no parameter is given, this defaults
@@ -132,7 +133,7 @@ module_param (pci_busclk, int, 0444);
  * is suspended -- processing power is just 0.39% of what it used to be,
  * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
 static int max_duration = 255;
-module_param (max_duration, int, 0444);
+module_param(max_duration, int, 0444);
 
 /* For the default policy, we want at least some processing power
  * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
@@ -140,7 +141,8 @@ module_param (max_duration, int, 0444);
 #define POLICY_MIN_DIV 20
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"gx-suspmod", msg)
 
 /**
  * we can detect a core multipiler from dir0_lsb
@@ -166,12 +168,20 @@ static int gx_freq_mult[16] = {
  *	Low Level chipset interface				*
  ****************************************************************/
 static struct pci_device_id gx_chipset_tbl[] __initdata = {
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510,
+		PCI_ANY_ID, PCI_ANY_ID },
 	{ 0, },
 };
 
+static void gx_write_byte(int reg, int value)
+{
+	pci_write_config_byte(gx_params->cs55x0, reg, value);
+}
+
 /**
  * gx_detect_chipset:
  *
@@ -200,7 +210,8 @@ static __init struct pci_dev *gx_detect_chipset(void)
 /**
  * gx_get_cpuspeed:
  *
- * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
+ * Geode CPU runs.
  */
 static unsigned int gx_get_cpuspeed(unsigned int cpu)
 {
@@ -217,17 +228,18 @@ static unsigned int gx_get_cpuspeed(unsigned int cpu)
  *
  **/
 
-static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
+		u8 *off_duration)
 {
 	unsigned int i;
 	u8 tmp_on, tmp_off;
 	int old_tmp_freq = stock_freq;
 	int tmp_freq;
 
-	*off_duration=1;
-	*on_duration=0;
+	*off_duration = 1;
+	*on_duration = 0;
 
-	for (i=max_duration; i>0; i--) {
+	for (i = max_duration; i > 0; i--) {
 		tmp_off = ((khz * i) / stock_freq) & 0xff;
 		tmp_on = i - tmp_off;
 		tmp_freq = (stock_freq * tmp_off) / i;
@@ -259,26 +271,34 @@ static void gx_set_cpuspeed(unsigned int khz)
 	freqs.cpu = 0;
 	freqs.old = gx_get_cpuspeed(0);
 
-	new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration);
+	new_khz = gx_validate_speed(khz, &gx_params->on_duration,
+			&gx_params->off_duration);
 
 	freqs.new = new_khz;
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	local_irq_save(flags);
 
-	if (new_khz != stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
+
+
+	if (new_khz != stock_freq) {
+		/* if new khz == 100% of CPU speed, it is special case */
 		switch (gx_params->cs55x0->device) {
 		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
 			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
 			/* FIXME: need to test other values -- Zwane,Miura */
-			pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
-			pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
-			pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
-
-			if (gx_params->cs55x0->revision < 0x10) {   /* CS5530(rev 1.2, 1.3) */
-				suscfg = gx_params->pci_suscfg | SUSMOD;
-			} else {                           /* CS5530A,B.. */
-				suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+			/* typical 2 to 4ms */
+			gx_write_byte(PCI_IRQTC, 4);
+			/* typical 50 to 100ms */
+			gx_write_byte(PCI_VIDTC, 100);
+			gx_write_byte(PCI_PMER1, pmer1);
+
+			if (gx_params->cs55x0->revision < 0x10) {
+				/* CS5530(rev 1.2, 1.3) */
+				suscfg = gx_params->pci_suscfg|SUSMOD;
+			} else {
+				/* CS5530A,B.. */
+				suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
 			}
 			break;
 		case PCI_DEVICE_ID_CYRIX_5520:
@@ -294,13 +314,13 @@ static void gx_set_cpuspeed(unsigned int khz)
 		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
 		gx_params->off_duration = 0;
 		gx_params->on_duration = 0;
-		dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+		dprintk("suspend modulation disabled: cpu runs 100%% speed.\n");
 	}
 
-	pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
-	pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+	gx_write_byte(PCI_MODOFF, gx_params->off_duration);
+	gx_write_byte(PCI_MODON, gx_params->on_duration);
 
-	pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+	gx_write_byte(PCI_SUSCFG, suscfg);
 	pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
 
 	local_irq_restore(flags);
@@ -334,7 +354,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
 		return -EINVAL;
 
 	policy->cpu = 0;
-	cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
 
 	/* it needs to be assured that at least one supported frequency is
 	 * within policy->min and policy->max. If it is not, policy->max
@@ -354,7 +375,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
 	policy->max = tmp_freq;
 	if (policy->max < policy->min)
 		policy->max = policy->min;
-	cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
 
 	return 0;
 }
@@ -398,18 +420,18 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 
 	/* determine maximum frequency */
-	if (pci_busclk) {
+	if (pci_busclk)
 		maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
-	} else if (cpu_khz) {
+	else if (cpu_khz)
 		maxfreq = cpu_khz;
-	} else {
+	else
 		maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
-	}
+
 	stock_freq = maxfreq;
 	curfreq = gx_get_cpuspeed(0);
 
 	dprintk("cpu max frequency is %d.\n", maxfreq);
-	dprintk("cpu current frequency is %dkHz.\n",curfreq);
+	dprintk("cpu current frequency is %dkHz.\n", curfreq);
 
 	/* setup basic struct for cpufreq API */
 	policy->cpu = 0;
@@ -447,7 +469,8 @@ static int __init cpufreq_gx_init(void)
 	struct pci_dev *gx_pci;
 
 	/* Test if we have the right hardware */
-	if ((gx_pci = gx_detect_chipset()) == NULL)
+	gx_pci = gx_detect_chipset();
+	if (gx_pci == NULL)
 		return -ENODEV;
 
 	/* check whether module parameters are sane */
@@ -468,9 +491,11 @@ static int __init cpufreq_gx_init(void)
 	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
 	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
 	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
-	pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+	pci_read_config_byte(params->cs55x0, PCI_MODOFF,
+			&(params->off_duration));
 
-	if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
+	ret = cpufreq_register_driver(&gx_suspmod_driver);
+	if (ret) {
 		kfree(params);
 		return ret;                   /* register error! */
 	}
@@ -485,9 +510,9 @@ static void __exit cpufreq_gx_exit(void)
 	kfree(gx_params);
 }
 
-MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
-MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE("GPL");
 
 module_init(cpufreq_gx_init);
 module_exit(cpufreq_gx_exit);
-- 
cgit v1.2.3


From ac617bd0f7b959dc6708ad2f0d6b9dcf4382f1ed Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 23:29:53 -0500
Subject: [CPUFREQ] checkpatch cleanups for longhaul

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/longhaul.c | 182 +++++++++++++++++----------------
 arch/x86/kernel/cpu/cpufreq/longhaul.h |  12 +--
 2 files changed, 100 insertions(+), 94 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index a4cff5d6e38..dc03622a83a 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -30,12 +30,12 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/kernel.h>
 
 #include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
-#include <asm/acpi.h>
-#include <linux/acpi.h>
 #include <acpi/processor.h>
 
 #include "longhaul.h"
@@ -58,7 +58,7 @@
 #define USE_NORTHBRIDGE		(1 << 2)
 
 static int cpu_model;
-static unsigned int numscales=16;
+static unsigned int numscales = 16;
 static unsigned int fsb;
 
 static const struct mV_pos *vrm_mV_table;
@@ -67,8 +67,8 @@ static const unsigned char *mV_vrm_table;
 static unsigned int highest_speed, lowest_speed; /* kHz */
 static unsigned int minmult, maxmult;
 static int can_scale_voltage;
-static struct acpi_processor *pr = NULL;
-static struct acpi_processor_cx *cx = NULL;
+static struct acpi_processor *pr;
+static struct acpi_processor_cx *cx;
 static u32 acpi_regs_addr;
 static u8 longhaul_flags;
 static unsigned int longhaul_index;
@@ -78,12 +78,13 @@ static int scale_voltage;
 static int disable_acpi_c3;
 static int revid_errata;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"longhaul", msg)
 
 
 /* Clock ratios multiplied by 10 */
-static int clock_ratio[32];
-static int eblcr_table[32];
+static int mults[32];
+static int eblcr[32];
 static int longhaul_version;
 static struct cpufreq_frequency_table *longhaul_table;
 
@@ -93,7 +94,7 @@ static char speedbuffer[8];
 static char *print_speed(int speed)
 {
 	if (speed < 1000) {
-		snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed);
+		snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
 		return speedbuffer;
 	}
 
@@ -122,27 +123,28 @@ static unsigned int calc_speed(int mult)
 
 static int longhaul_get_cpu_mult(void)
 {
-	unsigned long invalue=0,lo, hi;
+	unsigned long invalue = 0, lo, hi;
 
-	rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
-	invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
-	if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
+	rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
+	invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
+	if (longhaul_version == TYPE_LONGHAUL_V2 ||
+	    longhaul_version == TYPE_POWERSAVER) {
 		if (lo & (1<<27))
-			invalue+=16;
+			invalue += 16;
 	}
-	return eblcr_table[invalue];
+	return eblcr[invalue];
 }
 
 /* For processor with BCR2 MSR */
 
-static void do_longhaul1(unsigned int clock_ratio_index)
+static void do_longhaul1(unsigned int mults_index)
 {
 	union msr_bcr2 bcr2;
 
 	rdmsrl(MSR_VIA_BCR2, bcr2.val);
 	/* Enable software clock multiplier */
 	bcr2.bits.ESOFTBF = 1;
-	bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff;
+	bcr2.bits.CLOCKMUL = mults_index & 0xff;
 
 	/* Sync to timer tick */
 	safe_halt();
@@ -161,7 +163,7 @@ static void do_longhaul1(unsigned int clock_ratio_index)
 
 /* For processor with Longhaul MSR */
 
-static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
+static void do_powersaver(int cx_address, unsigned int mults_index,
 			  unsigned int dir)
 {
 	union msr_longhaul longhaul;
@@ -173,11 +175,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
 		longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
 	else
 		longhaul.bits.RevisionKey = 0;
-	longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
-	longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
+	longhaul.bits.SoftBusRatio = mults_index & 0xf;
+	longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
 	/* Setup new voltage */
 	if (can_scale_voltage)
-		longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f;
+		longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
 	/* Sync to timer tick */
 	safe_halt();
 	/* Raise voltage if necessary */
@@ -240,14 +242,14 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
 
 /**
  * longhaul_set_cpu_frequency()
- * @clock_ratio_index : bitpattern of the new multiplier.
+ * @mults_index : bitpattern of the new multiplier.
  *
  * Sets a new clock ratio.
  */
 
 static void longhaul_setstate(unsigned int table_index)
 {
-	unsigned int clock_ratio_index;
+	unsigned int mults_index;
 	int speed, mult;
 	struct cpufreq_freqs freqs;
 	unsigned long flags;
@@ -256,9 +258,9 @@ static void longhaul_setstate(unsigned int table_index)
 	u32 bm_timeout = 1000;
 	unsigned int dir = 0;
 
-	clock_ratio_index = longhaul_table[table_index].index;
+	mults_index = longhaul_table[table_index].index;
 	/* Safety precautions */
-	mult = clock_ratio[clock_ratio_index & 0x1f];
+	mult = mults[mults_index & 0x1f];
 	if (mult == -1)
 		return;
 	speed = calc_speed(mult);
@@ -274,7 +276,7 @@ static void longhaul_setstate(unsigned int table_index)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+	dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
 			fsb, mult/10, mult%10, print_speed(speed/1000));
 retry_loop:
 	preempt_disable();
@@ -282,8 +284,8 @@ retry_loop:
 
 	pic2_mask = inb(0xA1);
 	pic1_mask = inb(0x21);	/* works on C3. save mask. */
-	outb(0xFF,0xA1);	/* Overkill */
-	outb(0xFE,0x21);	/* TMR0 only */
+	outb(0xFF, 0xA1);	/* Overkill */
+	outb(0xFE, 0x21);	/* TMR0 only */
 
 	/* Wait while PCI bus is busy. */
 	if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
@@ -312,7 +314,7 @@ retry_loop:
 	 * Software controlled multipliers only.
 	 */
 	case TYPE_LONGHAUL_V1:
-		do_longhaul1(clock_ratio_index);
+		do_longhaul1(mults_index);
 		break;
 
 	/*
@@ -327,9 +329,9 @@ retry_loop:
 		if (longhaul_flags & USE_ACPI_C3) {
 			/* Don't allow wakeup */
 			acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
-			do_powersaver(cx->address, clock_ratio_index, dir);
+			do_powersaver(cx->address, mults_index, dir);
 		} else {
-			do_powersaver(0, clock_ratio_index, dir);
+			do_powersaver(0, mults_index, dir);
 		}
 		break;
 	}
@@ -341,8 +343,8 @@ retry_loop:
 		/* Enable bus master arbitration */
 		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
 	}
-	outb(pic2_mask,0xA1);	/* restore mask */
-	outb(pic1_mask,0x21);
+	outb(pic2_mask, 0xA1);	/* restore mask */
+	outb(pic1_mask, 0x21);
 
 	local_irq_restore(flags);
 	preempt_enable();
@@ -392,7 +394,8 @@ retry_loop:
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	if (!bm_timeout)
-		printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n");
+		printk(KERN_INFO PFX "Warning: Timeout while waiting for "
+				"idle PCI bus.\n");
 }
 
 /*
@@ -458,31 +461,32 @@ static int __init longhaul_get_ranges(void)
 		break;
 	}
 
-	dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
+	dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n",
 		 minmult/10, minmult%10, maxmult/10, maxmult%10);
 
 	highest_speed = calc_speed(maxmult);
 	lowest_speed = calc_speed(minmult);
-	dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+	dprintk("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
 		 print_speed(lowest_speed/1000),
 		 print_speed(highest_speed/1000));
 
 	if (lowest_speed == highest_speed) {
-		printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+		printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
 		return -EINVAL;
 	}
 	if (lowest_speed > highest_speed) {
-		printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+		printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
 			lowest_speed, highest_speed);
 		return -EINVAL;
 	}
 
-	longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
-	if(!longhaul_table)
+	longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table),
+			GFP_KERNEL);
+	if (!longhaul_table)
 		return -ENOMEM;
 
 	for (j = 0; j < numscales; j++) {
-		ratio = clock_ratio[j];
+		ratio = mults[j];
 		if (ratio == -1)
 			continue;
 		if (ratio > maxmult || ratio < minmult)
@@ -521,7 +525,7 @@ static int __init longhaul_get_ranges(void)
 
 	/* Find index we are running on */
 	for (j = 0; j < k; j++) {
-		if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) {
+		if (mults[longhaul_table[j].index & 0x1f] == mult) {
 			longhaul_index = j;
 			break;
 		}
@@ -559,20 +563,22 @@ static void __init longhaul_setup_voltagescaling(void)
 	maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
 
 	if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
-		printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
+		printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
 					"Voltage scaling disabled.\n",
-					minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
+					minvid.mV/1000, minvid.mV%1000,
+					maxvid.mV/1000, maxvid.mV%1000);
 		return;
 	}
 
 	if (minvid.mV == maxvid.mV) {
-		printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
-				"both %d.%03d. Voltage scaling disabled\n",
+		printk(KERN_INFO PFX "Claims to support voltage scaling but "
+				"min & max are both %d.%03d. "
+				"Voltage scaling disabled\n",
 				maxvid.mV/1000, maxvid.mV%1000);
 		return;
 	}
 
-	/* How many voltage steps */
+	/* How many voltage steps*/
 	numvscales = maxvid.pos - minvid.pos + 1;
 	printk(KERN_INFO PFX
 		"Max VID=%d.%03d  "
@@ -586,7 +592,7 @@ static void __init longhaul_setup_voltagescaling(void)
 	j = longhaul.bits.MinMHzBR;
 	if (longhaul.bits.MinMHzBR4)
 		j += 16;
-	min_vid_speed = eblcr_table[j];
+	min_vid_speed = eblcr[j];
 	if (min_vid_speed == -1)
 		return;
 	switch (longhaul.bits.MinMHzFSB) {
@@ -617,7 +623,8 @@ static void __init longhaul_setup_voltagescaling(void)
 			pos = minvid.pos;
 		longhaul_table[j].index |= mV_vrm_table[pos] << 8;
 		vid = vrm_mV_table[mV_vrm_table[pos]];
-		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV);
+		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+				speed, j, vid.mV);
 		j++;
 	}
 
@@ -640,7 +647,8 @@ static int longhaul_target(struct cpufreq_policy *policy,
 	unsigned int dir = 0;
 	u8 vid, current_vid;
 
-	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
+	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq,
+				relation, &table_index))
 		return -EINVAL;
 
 	/* Don't set same frequency again */
@@ -656,7 +664,8 @@ static int longhaul_target(struct cpufreq_policy *policy,
 		 * this in hardware, C3 is old and we need to do this
 		 * in software. */
 		i = longhaul_index;
-		current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f;
+		current_vid = (longhaul_table[longhaul_index].index >> 8);
+		current_vid &= 0x1f;
 		if (table_index > longhaul_index)
 			dir = 1;
 		while (i != table_index) {
@@ -691,9 +700,9 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
 {
 	struct acpi_device *d;
 
-	if ( acpi_bus_get_device(obj_handle, &d) ) {
+	if (acpi_bus_get_device(obj_handle, &d))
 		return 0;
-	}
+
 	*return_value = acpi_driver_data(d);
 	return 1;
 }
@@ -750,7 +759,7 @@ static int longhaul_setup_southbridge(void)
 	/* Find VT8235 southbridge */
 	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
 	if (dev == NULL)
-	/* Find VT8237 southbridge */
+		/* Find VT8237 southbridge */
 		dev = pci_get_device(PCI_VENDOR_ID_VIA,
 				     PCI_DEVICE_ID_VIA_8237, NULL);
 	if (dev != NULL) {
@@ -769,7 +778,8 @@ static int longhaul_setup_southbridge(void)
 		if (pci_cmd & 1 << 7) {
 			pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
 			acpi_regs_addr &= 0xff00;
-			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr);
+			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
+					acpi_regs_addr);
 		}
 
 		pci_dev_put(dev);
@@ -781,7 +791,7 @@ static int longhaul_setup_southbridge(void)
 static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
-	char *cpuname=NULL;
+	char *cpuname = NULL;
 	int ret;
 	u32 lo, hi;
 
@@ -791,8 +801,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		cpu_model = CPU_SAMUEL;
 		cpuname = "C3 'Samuel' [C5A]";
 		longhaul_version = TYPE_LONGHAUL_V1;
-		memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
-		memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
+		memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+		memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
 		break;
 
 	case 7:
@@ -803,10 +813,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 			cpuname = "C3 'Samuel 2' [C5B]";
 			/* Note, this is not a typo, early Samuel2's had
 			 * Samuel1 ratios. */
-			memcpy(clock_ratio, samuel1_clock_ratio,
-				sizeof(samuel1_clock_ratio));
-			memcpy(eblcr_table, samuel2_eblcr,
-				sizeof(samuel2_eblcr));
+			memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+			memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
 			break;
 		case 1 ... 15:
 			longhaul_version = TYPE_LONGHAUL_V1;
@@ -817,10 +825,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 				cpu_model = CPU_EZRA;
 				cpuname = "C3 'Ezra' [C5C]";
 			}
-			memcpy(clock_ratio, ezra_clock_ratio,
-				sizeof(ezra_clock_ratio));
-			memcpy(eblcr_table, ezra_eblcr,
-				sizeof(ezra_eblcr));
+			memcpy(mults, ezra_mults, sizeof(ezra_mults));
+			memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
 			break;
 		}
 		break;
@@ -829,18 +835,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		cpu_model = CPU_EZRA_T;
 		cpuname = "C3 'Ezra-T' [C5M]";
 		longhaul_version = TYPE_POWERSAVER;
-		numscales=32;
-		memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
-		memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
+		numscales = 32;
+		memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
+		memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
 		break;
 
 	case 9:
 		longhaul_version = TYPE_POWERSAVER;
 		numscales = 32;
-		memcpy(clock_ratio,
-		       nehemiah_clock_ratio,
-		       sizeof(nehemiah_clock_ratio));
-		memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr));
+		memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
+		memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
 		switch (c->x86_mask) {
 		case 0 ... 1:
 			cpu_model = CPU_NEHEMIAH;
@@ -869,14 +873,14 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 			longhaul_version = TYPE_LONGHAUL_V1;
 	}
 
-	printk (KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
+	printk(KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
 	switch (longhaul_version) {
 	case TYPE_LONGHAUL_V1:
 	case TYPE_LONGHAUL_V2:
-		printk ("Longhaul v%d supported.\n", longhaul_version);
+		printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
 		break;
 	case TYPE_POWERSAVER:
-		printk ("Powersaver supported.\n");
+		printk(KERN_CONT "Powersaver supported.\n");
 		break;
 	};
 
@@ -940,7 +944,7 @@ static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* longhaul_attr[] = {
+static struct freq_attr *longhaul_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -966,13 +970,15 @@ static int __init longhaul_init(void)
 
 #ifdef CONFIG_SMP
 	if (num_online_cpus() > 1) {
-		printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
+		printk(KERN_ERR PFX "More than 1 CPU detected, "
+				"longhaul disabled.\n");
 		return -ENODEV;
 	}
 #endif
 #ifdef CONFIG_X86_IO_APIC
 	if (cpu_has_apic) {
-		printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n");
+		printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
+				"broken in this configuration.\n");
 		return -ENODEV;
 	}
 #endif
@@ -993,8 +999,8 @@ static void __exit longhaul_exit(void)
 {
 	int i;
 
-	for (i=0; i < numscales; i++) {
-		if (clock_ratio[i] == maxmult) {
+	for (i = 0; i < numscales; i++) {
+		if (mults[i] == maxmult) {
 			longhaul_setstate(i);
 			break;
 		}
@@ -1007,11 +1013,11 @@ static void __exit longhaul_exit(void)
 /* Even if BIOS is exporting ACPI C3 state, and it is used
  * with success when CPU is idle, this state doesn't
  * trigger frequency transition in some cases. */
-module_param (disable_acpi_c3, int, 0644);
+module_param(disable_acpi_c3, int, 0644);
 MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
 /* Change CPU voltage with frequency. Very usefull to save
  * power, but most VIA C3 processors aren't supporting it. */
-module_param (scale_voltage, int, 0644);
+module_param(scale_voltage, int, 0644);
 MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
 /* Force revision key to 0 for processors which doesn't
  * support voltage scaling, but are introducing itself as
@@ -1019,9 +1025,9 @@ MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
 module_param(revid_errata, int, 0644);
 MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
-MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE("GPL");
 
 late_initcall(longhaul_init);
 module_exit(longhaul_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h
index 4fcc320997d..e2360a469f7 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h
@@ -49,14 +49,14 @@ union msr_longhaul {
 
 /*
  * Clock ratio tables. Div/Mod by 10 to get ratio.
- * The eblcr ones specify the ratio read from the CPU.
- * The clock_ratio ones specify what to write to the CPU.
+ * The eblcr values specify the ratio read from the CPU.
+ * The mults values specify what to write to the CPU.
  */
 
 /*
  * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
  */
-static const int __initdata samuel1_clock_ratio[16] = {
+static const int __initdata samuel1_mults[16] = {
 	-1, /* 0000 -> RESERVED */
 	30, /* 0001 ->  3.0x */
 	40, /* 0010 ->  4.0x */
@@ -119,7 +119,7 @@ static const int __initdata samuel2_eblcr[16] = {
 /*
  * VIA C3 Ezra
  */
-static const int __initdata ezra_clock_ratio[16] = {
+static const int __initdata ezra_mults[16] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -160,7 +160,7 @@ static const int __initdata ezra_eblcr[16] = {
 /*
  * VIA C3 (Ezra-T) [C5M].
  */
-static const int __initdata ezrat_clock_ratio[32] = {
+static const int __initdata ezrat_mults[32] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -235,7 +235,7 @@ static const int __initdata ezrat_eblcr[32] = {
 /*
  * VIA C3 Nehemiah */
 
-static const int __initdata  nehemiah_clock_ratio[32] = {
+static const int __initdata  nehemiah_mults[32] = {
 	100, /* 0000 -> 10.0x */
 	-1, /* 0001 -> 16.0x */
 	40,  /* 0010 ->  4.0x */
-- 
cgit v1.2.3


From 48ee923a666d4cc54e48d55fc573c57492501122 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 23:32:50 -0500
Subject: [CPUFREQ] checkpatch cleanups for longrun

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/longrun.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index 777a7ff075d..da5f70fcb76 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -11,12 +11,13 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/timex.h>
 
 #include <asm/msr.h>
 #include <asm/processor.h>
-#include <asm/timex.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"longrun", msg)
 
 static struct cpufreq_driver	longrun_driver;
 
@@ -51,7 +52,7 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy)
 	msr_lo &= 0x0000007F;
 	msr_hi &= 0x0000007F;
 
-	if ( longrun_high_freq <= longrun_low_freq ) {
+	if (longrun_high_freq <= longrun_low_freq) {
 		/* Assume degenerate Longrun table */
 		policy->min = policy->max = longrun_high_freq;
 	} else {
@@ -79,7 +80,7 @@ static int longrun_set_policy(struct cpufreq_policy *policy)
 	if (!policy)
 		return -EINVAL;
 
-	if ( longrun_high_freq <= longrun_low_freq ) {
+	if (longrun_high_freq <= longrun_low_freq) {
 		/* Assume degenerate Longrun table */
 		pctg_lo = pctg_hi = 100;
 	} else {
@@ -152,7 +153,7 @@ static unsigned int longrun_get(unsigned int cpu)
 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 	dprintk("cpuid eax is %u\n", eax);
 
-	return (eax * 1000);
+	return eax * 1000;
 }
 
 /**
@@ -196,7 +197,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
 		*high_freq = msr_lo * 1000; /* to kHz */
 
-		dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq);
+		dprintk("longrun table interface told %u - %u kHz\n",
+				*low_freq, *high_freq);
 
 		if (*low_freq > *high_freq)
 			*low_freq = *high_freq;
@@ -219,7 +221,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 	/* try decreasing in 10% steps, some processors react only
 	 * on some barrier values */
-	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) {
+	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
 		/* set to 0 to try_hi perf_pctg */
 		msr_lo &= 0xFFFFFF80;
 		msr_hi &= 0xFFFFFF80;
@@ -236,7 +238,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 
 	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
 	 * eqals
-	 * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
 	 *
 	 * high_freq * perf_pctg is stored tempoarily into "ebx".
 	 */
@@ -317,9 +319,10 @@ static void __exit longrun_exit(void)
 }
 
 
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
+		"Efficeon processors.");
+MODULE_LICENSE("GPL");
 
 module_init(longrun_init);
 module_exit(longrun_exit);
-- 
cgit v1.2.3


From 14a6650f13b958aabc30ddd575b0902384b22457 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sun, 18 Jan 2009 00:00:04 -0500
Subject: [CPUFREQ] checkpatch cleanups for powernow-k6

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k6.c | 44 ++++++++++++++++++-------------
 1 file changed, 26 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index c1ac5790c63..f10dea409f4 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
@@ -1,6 +1,7 @@
 /*
  *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
- *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski.
+ *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä,
+ *                 Dominik Brodowski.
  *
  *  Licensed under the terms of the GNU GPL License version 2.
  *
@@ -13,14 +14,15 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
-
-#include <asm/msr.h>
 #include <linux/timex.h>
 #include <linux/io.h>
 
+#include <asm/msr.h>
+
 #define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
 					   as it is unused */
 
+#define PFX "powernow-k6: "
 static unsigned int                     busfreq;   /* FSB, in 10 kHz */
 static unsigned int                     max_multiplier;
 
@@ -47,8 +49,8 @@ static struct cpufreq_frequency_table clock_ratio[] = {
  */
 static int powernow_k6_get_cpu_multiplier(void)
 {
-	u64             invalue = 0;
-	u32             msrval;
+	u64 invalue = 0;
+	u32 msrval;
 
 	msrval = POWERNOW_IOPORT + 0x1;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
@@ -68,12 +70,12 @@ static int powernow_k6_get_cpu_multiplier(void)
  */
 static void powernow_k6_set_state(unsigned int best_i)
 {
-	unsigned long           outvalue = 0, invalue = 0;
-	unsigned long           msrval;
-	struct cpufreq_freqs    freqs;
+	unsigned long outvalue = 0, invalue = 0;
+	unsigned long msrval;
+	struct cpufreq_freqs freqs;
 
 	if (clock_ratio[best_i].index > max_multiplier) {
-		printk(KERN_ERR "cpufreq: invalid target frequency\n");
+		printk(KERN_ERR PFX "invalid target frequency\n");
 		return;
 	}
 
@@ -119,7 +121,8 @@ static int powernow_k6_verify(struct cpufreq_policy *policy)
  * powernow_k6_setpolicy - sets a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * sets a new CPUFreq policy
  */
@@ -127,9 +130,10 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 			       unsigned int target_freq,
 			       unsigned int relation)
 {
-	unsigned int    newstate = 0;
+	unsigned int newstate = 0;
 
-	if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &clock_ratio[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	powernow_k6_set_state(newstate);
@@ -140,7 +144,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 
 static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 {
-	unsigned int i;
+	unsigned int i, f;
 	int result;
 
 	if (policy->cpu != 0)
@@ -152,10 +156,11 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 
 	/* table init */
 	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if (clock_ratio[i].index > max_multiplier)
+		f = clock_ratio[i].index;
+		if (f > max_multiplier)
 			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
-			clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
+			clock_ratio[i].frequency = busfreq * f;
 	}
 
 	/* cpuinfo and default policy values */
@@ -185,7 +190,9 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
 
 static unsigned int powernow_k6_get(unsigned int cpu)
 {
-	return busfreq * powernow_k6_get_cpu_multiplier();
+	unsigned int ret;
+	ret = (busfreq * powernow_k6_get_cpu_multiplier());
+	return ret;
 }
 
 static struct freq_attr *powernow_k6_attr[] = {
@@ -221,7 +228,7 @@ static int __init powernow_k6_init(void)
 		return -ENODEV;
 
 	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
-		printk("cpufreq: PowerNow IOPORT region already used.\n");
+		printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
 		return -EIO;
 	}
 
@@ -246,7 +253,8 @@ static void __exit powernow_k6_exit(void)
 }
 
 
-MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
+MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
 MODULE_LICENSE("GPL");
 
-- 
cgit v1.2.3


From 6072ace436800a011c3cb9a75ee49276bd90445a Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sun, 18 Jan 2009 01:27:35 -0500
Subject: [CPUFREQ] checkpatch cleanups for sc520

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/sc520_freq.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
index 42da9bd677d..435a996a613 100644
--- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
+++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
@@ -19,17 +19,19 @@
 
 #include <linux/delay.h>
 #include <linux/cpufreq.h>
+#include <linux/timex.h>
+#include <linux/io.h>
 
 #include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
 
 #define MMCR_BASE	0xfffef000	/* The default base address */
 #define OFFS_CPUCTL	0x2   /* CPU Control Register */
 
 static __u8 __iomem *cpuctl;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"sc520_freq", msg)
+#define PFX "sc520_freq: "
 
 static struct cpufreq_frequency_table sc520_freq_table[] = {
 	{0x01,	100000},
@@ -43,7 +45,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
 
 	switch (clockspeed_reg & 0x03) {
 	default:
-		printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg);
+		printk(KERN_ERR PFX "error: cpuctl register has unexpected "
+				"value %02x\n", clockspeed_reg);
 	case 0x01:
 		return 100000;
 	case 0x02:
@@ -51,7 +54,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
 	}
 }
 
-static void sc520_freq_set_cpu_state (unsigned int state)
+static void sc520_freq_set_cpu_state(unsigned int state)
 {
 
 	struct cpufreq_freqs	freqs;
@@ -76,18 +79,19 @@ static void sc520_freq_set_cpu_state (unsigned int state)
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 };
 
-static int sc520_freq_verify (struct cpufreq_policy *policy)
+static int sc520_freq_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
 }
 
-static int sc520_freq_target (struct cpufreq_policy *policy,
+static int sc520_freq_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
 {
 	unsigned int newstate = 0;
 
-	if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, sc520_freq_table,
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	sc520_freq_set_cpu_state(newstate);
@@ -116,7 +120,7 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
 	if (result)
-		return (result);
+		return result;
 
 	cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
 
@@ -131,7 +135,7 @@ static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
 }
 
 
-static struct freq_attr* sc520_freq_attr[] = {
+static struct freq_attr *sc520_freq_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -155,13 +159,13 @@ static int __init sc520_freq_init(void)
 	int err;
 
 	/* Test if we have the right hardware */
-	if(c->x86_vendor != X86_VENDOR_AMD ||
-				c->x86 != 4 || c->x86_model != 9) {
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9) {
 		dprintk("no Elan SC520 processor found!\n");
 		return -ENODEV;
 	}
 	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
-	if(!cpuctl) {
+	if (!cpuctl) {
 		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
 		return -ENOMEM;
 	}
-- 
cgit v1.2.3


From bbfebd66554b934b270c4c49442f4fe5e62df0e5 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 23:55:22 -0500
Subject: [CPUFREQ] checkpatch cleanups for speedstep related drivers.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/p4-clockmod.c   |  60 +++++-----
 arch/x86/kernel/cpu/cpufreq/speedstep-ich.c |  70 ++++++------
 arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 129 ++++++++++++---------
 arch/x86/kernel/cpu/cpufreq/speedstep-lib.h |  18 +--
 arch/x86/kernel/cpu/cpufreq/speedstep-smi.c | 166 +++++++++++++++++-----------
 5 files changed, 258 insertions(+), 185 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index b585e04cbc9..46a2a7a5314 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -27,15 +27,16 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
+#include <linux/timex.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/timex.h>
 
 #include "speedstep-lib.h"
 
 #define PFX	"p4-clockmod: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"p4-clockmod", msg)
 
 /*
  * Duty Cycle (3bits), note DC_DISABLE is not specified in
@@ -58,7 +59,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 {
 	u32 l, h;
 
-	if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+	if (!cpu_online(cpu) ||
+	    (newstate > DC_DISABLE) || (newstate == DC_RESV))
 		return -EINVAL;
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
@@ -66,7 +68,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 	if (l & 0x01)
 		dprintk("CPU#%d currently thermal throttled\n", cpu);
 
-	if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+	if (has_N44_O17_errata[cpu] &&
+	    (newstate == DC_25PT || newstate == DC_DFLT))
 		newstate = DC_38PT;
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
@@ -112,7 +115,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 	int i;
 
-	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = cpufreq_p4_get(policy->cpu);
@@ -127,7 +131,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
 
-	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+	/* run on each logical CPU,
+	 * see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
 	for_each_cpu(i, policy->cpus)
@@ -153,28 +158,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 {
 	if (c->x86 == 0x06) {
 		if (cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
-			       "The acpi-cpufreq module offers voltage scaling"
-			       " in addition of frequency scaling. You should use "
-			       "that instead of p4-clockmod, if possible.\n");
+			printk(KERN_WARNING PFX "Warning: EST-capable CPU "
+			       "detected. The acpi-cpufreq module offers "
+			       "voltage scaling in addition of frequency "
+			       "scaling. You should use that instead of "
+			       "p4-clockmod, if possible.\n");
 		switch (c->x86_model) {
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
 		case 0x16: /* Celeron Core */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
-			return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
 		case 0x0D: /* Pentium M (Dothan) */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 			/* fall through */
 		case 0x09: /* Pentium M (Banias) */
-			return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
 		}
 	}
 
 	if (c->x86 != 0xF) {
 		if (!cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. "
-				"Please send an e-mail to <cpufreq@vger.kernel.org>\n");
+			printk(KERN_WARNING PFX "Unknown CPU. "
+				"Please send an e-mail to "
+				"<cpufreq@vger.kernel.org>\n");
 		return 0;
 	}
 
@@ -182,16 +189,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 	 * throttling is active or not. */
 	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 
-	if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
 		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
 		       "The speedstep-ich or acpi cpufreq modules offer "
 		       "voltage scaling in addition of frequency scaling. "
 		       "You should use either one instead of p4-clockmod, "
 		       "if possible.\n");
-		return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
 	}
 
-	return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
 }
 
 
@@ -223,8 +230,8 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 		return -EINVAL;
 
 	/* table init */
-	for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
 			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
 			p4clockmod_table[i].frequency = (stock_freq * i)/8;
@@ -258,12 +265,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu)
 		l = DC_DISABLE;
 
 	if (l != DC_DISABLE)
-		return (stock_freq * l / 8);
+		return stock_freq * l / 8;
 
 	return stock_freq;
 }
 
-static struct freq_attr* p4clockmod_attr[] = {
+static struct freq_attr *p4clockmod_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -299,9 +306,10 @@ static int __init cpufreq_p4_init(void)
 
 	ret = cpufreq_register_driver(&p4clockmod_driver);
 	if (!ret)
-		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
+				"Modulation available\n");
 
-	return (ret);
+	return ret;
 }
 
 
@@ -311,9 +319,9 @@ static void __exit cpufreq_p4_exit(void)
 }
 
 
-MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE("GPL");
 
 late_initcall(cpufreq_p4_init);
 module_exit(cpufreq_p4_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index dedc1e98f16..8bbb11adb31 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev;
 
 /* speedstep_processor
  */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor;
 
 static u32 pmbase;
 
@@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
 };
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-ich", msg)
 
 
 /**
@@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  *
  * Returns: -ENODEV if no register could be found
  */
-static int speedstep_find_register (void)
+static int speedstep_find_register(void)
 {
 	if (!speedstep_chipset_dev)
 		return -ENODEV;
@@ -90,7 +91,7 @@ static int speedstep_find_register (void)
  *
  *   Tries to change the SpeedStep state.
  */
-static void speedstep_set_state (unsigned int state)
+static void speedstep_set_state(unsigned int state)
 {
 	u8 pm2_blk;
 	u8 value;
@@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state)
 
 	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 
-	if (state == (value & 0x1)) {
-		dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
-	} else {
-		printk (KERN_ERR "cpufreq: change failed - I/O error\n");
-	}
+	if (state == (value & 0x1))
+		dprintk("change to %u MHz succeeded\n",
+			speedstep_get_frequency(speedstep_processor) / 1000);
+	else
+		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
 
 	return;
 }
@@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state)
  *   Tries to activate the SpeedStep status and control registers.
  * Returns -EINVAL on an unsupported chipset, and zero on success.
  */
-static int speedstep_activate (void)
+static int speedstep_activate(void)
 {
 	u16 value = 0;
 
@@ -175,20 +176,18 @@ static int speedstep_activate (void)
  * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
  * chipset, or zero on failure.
  */
-static unsigned int speedstep_detect_chipset (void)
+static unsigned int speedstep_detect_chipset(void)
 {
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801DB_12,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev)
 		return 4; /* 4-M */
 
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801CA_12,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev)
 		return 3; /* 3-M */
@@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void)
 
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801BA_10,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev) {
 		/* speedstep.c causes lockups on Dell Inspirons 8000 and
@@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void)
 
 		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82815_MC,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 
 		if (!hostbridge)
@@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus)
 
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed_ptr(current, cpus);
-	speed = speedstep_get_processor_frequency(speedstep_processor);
+	speed = speedstep_get_frequency(speedstep_processor);
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 	dprintk("detected %u kHz as current frequency\n", speed);
 	return speed;
@@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu)
  * speedstep_target - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
-static int speedstep_target (struct cpufreq_policy *policy,
+static int speedstep_target(struct cpufreq_policy *policy,
 			     unsigned int target_freq,
 			     unsigned int relation)
 {
@@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	cpumask_t cpus_allowed;
 	int i;
 
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = _speedstep_get(policy->cpus);
@@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
  * Limit must be within speedstep_low_freq and speedstep_high_freq, with
  * at least one border included.
  */
-static int speedstep_verify (struct cpufreq_policy *policy)
+static int speedstep_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
 }
@@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 		return -EIO;
 
 	dprintk("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
 		(speed / 1000));
 
 	/* cpuinfo and default policy values */
@@ -352,9 +352,9 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
 	if (result)
-		return (result);
+		return result;
 
-        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
 
 	return 0;
 }
@@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* speedstep_attr[] = {
+static struct freq_attr *speedstep_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -396,13 +396,15 @@ static int __init speedstep_init(void)
 	/* detect processor */
 	speedstep_processor = speedstep_detect_processor();
 	if (!speedstep_processor) {
-		dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
+		dprintk("Intel(R) SpeedStep(TM) capable processor "
+				"not found\n");
 		return -ENODEV;
 	}
 
 	/* detect chipset */
 	if (!speedstep_detect_chipset()) {
-		dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
+		dprintk("Intel(R) SpeedStep(TM) for this chipset not "
+				"(yet) available.\n");
 		return -ENODEV;
 	}
 
@@ -431,9 +433,11 @@ static void __exit speedstep_exit(void)
 }
 
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
+		"with ICH-M southbridges.");
+MODULE_LICENSE("GPL");
 
 module_init(speedstep_init);
 module_exit(speedstep_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
index cdac7d62369..55c696daa05 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
@@ -18,10 +18,13 @@
 #include <asm/msr.h>
 #include "speedstep-lib.h"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-lib", msg)
+
+#define PFX "speedstep-lib: "
 
 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
-static int relaxed_check = 0;
+static int relaxed_check;
 #else
 #define relaxed_check 0
 #endif
@@ -30,14 +33,14 @@ static int relaxed_check = 0;
  *                   GET PROCESSOR CORE SPEED IN KHZ                 *
  *********************************************************************/
 
-static unsigned int pentium3_get_frequency (unsigned int processor)
+static unsigned int pentium3_get_frequency(unsigned int processor)
 {
-        /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
 	struct {
 		unsigned int ratio;	/* Frequency Multiplier (x10) */
 		u8 bitmap;		/* power on configuration bits
 					[27, 25:22] (in MSR 0x2a) */
-	} msr_decode_mult [] = {
+	} msr_decode_mult[] = {
 		{ 30, 0x01 },
 		{ 35, 0x05 },
 		{ 40, 0x02 },
@@ -52,7 +55,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 		{ 85, 0x26 },
 		{ 90, 0x20 },
 		{ 100, 0x2b },
-		{ 0, 0xff }     /* error or unknown value */
+		{ 0, 0xff }	/* error or unknown value */
 	};
 
 	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
@@ -60,7 +63,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 		unsigned int value;	/* Front Side Bus speed in MHz */
 		u8 bitmap;		/* power on configuration bits [18: 19]
 					(in MSR 0x2a) */
-	} msr_decode_fsb [] = {
+	} msr_decode_fsb[] = {
 		{  66, 0x0 },
 		{ 100, 0x2 },
 		{ 133, 0x1 },
@@ -85,7 +88,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 	}
 
 	/* decode the multiplier */
-	if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
+	if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
 		dprintk("workaround for early PIIIs\n");
 		msr_lo &= 0x03c00000;
 	} else
@@ -97,9 +100,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 		j++;
 	}
 
-	dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+	dprintk("speed is %u\n",
+		(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
 
-	return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+	return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
 }
 
 
@@ -112,20 +116,23 @@ static unsigned int pentiumM_get_frequency(void)
 
 	/* see table B-2 of 24547212.pdf */
 	if (msr_lo & 0x00040000) {
-		printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp);
+		printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
+				msr_lo, msr_tmp);
 		return 0;
 	}
 
 	msr_tmp = (msr_lo >> 22) & 0x1f;
-	dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
+	dprintk("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * 100 * 1000));
 
-	return (msr_tmp * 100 * 1000);
+	return msr_tmp * 100 * 1000;
 }
 
 static unsigned int pentium_core_get_frequency(void)
 {
 	u32 fsb = 0;
 	u32 msr_lo, msr_tmp;
+	int ret;
 
 	rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
 	/* see table B-2 of 25366920.pdf */
@@ -153,12 +160,15 @@ static unsigned int pentium_core_get_frequency(void)
 	}
 
 	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+			msr_lo, msr_tmp);
 
 	msr_tmp = (msr_lo >> 22) & 0x1f;
-	dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb));
+	dprintk("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * fsb));
 
-	return (msr_tmp * fsb);
+	ret = (msr_tmp * fsb);
+	return ret;
 }
 
 
@@ -167,6 +177,7 @@ static unsigned int pentium4_get_frequency(void)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	u32 msr_lo, msr_hi, mult;
 	unsigned int fsb = 0;
+	unsigned int ret;
 
 	rdmsr(0x2c, msr_lo, msr_hi);
 
@@ -195,44 +206,47 @@ static unsigned int pentium4_get_frequency(void)
 	}
 
 	if (!fsb)
-		printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
+		printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
+				"Please send an e-mail to <linux@brodo.de>\n");
 
 	/* Multiplier. */
 	mult = msr_lo >> 24;
 
-	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
+	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+			fsb, mult, (fsb * mult));
 
-	return (fsb * mult);
+	ret = (fsb * mult);
+	return ret;
 }
 
 
-unsigned int speedstep_get_processor_frequency(unsigned int processor)
+unsigned int speedstep_get_frequency(unsigned int processor)
 {
 	switch (processor) {
-	case SPEEDSTEP_PROCESSOR_PCORE:
+	case SPEEDSTEP_CPU_PCORE:
 		return pentium_core_get_frequency();
-	case SPEEDSTEP_PROCESSOR_PM:
+	case SPEEDSTEP_CPU_PM:
 		return pentiumM_get_frequency();
-	case SPEEDSTEP_PROCESSOR_P4D:
-	case SPEEDSTEP_PROCESSOR_P4M:
+	case SPEEDSTEP_CPU_P4D:
+	case SPEEDSTEP_CPU_P4M:
 		return pentium4_get_frequency();
-	case SPEEDSTEP_PROCESSOR_PIII_T:
-	case SPEEDSTEP_PROCESSOR_PIII_C:
-	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
 		return pentium3_get_frequency(processor);
 	default:
 		return 0;
 	};
 	return 0;
 }
-EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
+EXPORT_SYMBOL_GPL(speedstep_get_frequency);
 
 
 /*********************************************************************
  *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
  *********************************************************************/
 
-unsigned int speedstep_detect_processor (void)
+unsigned int speedstep_detect_processor(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 ebx, msr_lo, msr_hi;
@@ -261,7 +275,7 @@ unsigned int speedstep_detect_processor (void)
 			 * sample has ebx = 0x0f, production has 0x0e.
 			 */
 			if ((ebx == 0x0e) || (ebx == 0x0f))
-				return SPEEDSTEP_PROCESSOR_P4M;
+				return SPEEDSTEP_CPU_P4M;
 			break;
 		case 7:
 			/*
@@ -272,7 +286,7 @@ unsigned int speedstep_detect_processor (void)
 			 * samples are only of B-stepping...
 			 */
 			if (ebx == 0x0e)
-				return SPEEDSTEP_PROCESSOR_P4M;
+				return SPEEDSTEP_CPU_P4M;
 			break;
 		case 9:
 			/*
@@ -288,10 +302,13 @@ unsigned int speedstep_detect_processor (void)
 			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
 			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
 			 * also, M-P4M HTs have ebx=0x8, too
-			 * For now, they are distinguished by the model_id string
+			 * For now, they are distinguished by the model_id
+			 * string
 			 */
-			if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
-				return SPEEDSTEP_PROCESSOR_P4M;
+			if ((ebx == 0x0e) ||
+				(strstr(c->x86_model_id,
+				    "Mobile Intel(R) Pentium(R) 4") != NULL))
+				return SPEEDSTEP_CPU_P4M;
 			break;
 		default:
 			break;
@@ -301,7 +318,8 @@ unsigned int speedstep_detect_processor (void)
 
 	switch (c->x86_model) {
 	case 0x0B: /* Intel PIII [Tualatin] */
-		/* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */
+		/* cpuid_ebx(1) is 0x04 for desktop PIII,
+		 * 0x06 for mobile PIII-M */
 		ebx = cpuid_ebx(0x00000001);
 		dprintk("ebx is %x\n", ebx);
 
@@ -313,14 +331,15 @@ unsigned int speedstep_detect_processor (void)
 		/* So far all PIII-M processors support SpeedStep. See
 		 * Intel's 24540640.pdf of June 2003
 		 */
-		return SPEEDSTEP_PROCESSOR_PIII_T;
+		return SPEEDSTEP_CPU_PIII_T;
 
 	case 0x08: /* Intel PIII [Coppermine] */
 
 		/* all mobile PIII Coppermines have FSB 100 MHz
 		 * ==> sort out a few desktop PIIIs. */
 		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
-		dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
+		dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
 		msr_lo &= 0x00c0000;
 		if (msr_lo != 0x0080000)
 			return 0;
@@ -332,13 +351,15 @@ unsigned int speedstep_detect_processor (void)
 		 * bit 56 or 57 is set
 		 */
 		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
-		dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
-		if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+		dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
+		if ((msr_hi & (1<<18)) &&
+		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
 			if (c->x86_mask == 0x01) {
 				dprintk("early PIII version\n");
-				return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
+				return SPEEDSTEP_CPU_PIII_C_EARLY;
 			} else
-				return SPEEDSTEP_PROCESSOR_PIII_C;
+				return SPEEDSTEP_CPU_PIII_C;
 		}
 
 	default:
@@ -369,7 +390,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 	dprintk("trying to determine both speeds\n");
 
 	/* get current speed */
-	prev_speed = speedstep_get_processor_frequency(processor);
+	prev_speed = speedstep_get_frequency(processor);
 	if (!prev_speed)
 		return -EIO;
 
@@ -379,7 +400,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 
 	/* switch to low state */
 	set_state(SPEEDSTEP_LOW);
-	*low_speed = speedstep_get_processor_frequency(processor);
+	*low_speed = speedstep_get_frequency(processor);
 	if (!*low_speed) {
 		ret = -EIO;
 		goto out;
@@ -398,7 +419,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 	if (transition_latency)
 		do_gettimeofday(&tv2);
 
-	*high_speed = speedstep_get_processor_frequency(processor);
+	*high_speed = speedstep_get_frequency(processor);
 	if (!*high_speed) {
 		ret = -EIO;
 		goto out;
@@ -426,9 +447,12 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 		/* check if the latency measurement is too high or too low
 		 * and set it to a safe value (500uSec) in that case
 		 */
-		if (*transition_latency > 10000000 || *transition_latency < 50000) {
-			printk (KERN_WARNING "speedstep: frequency transition measured seems out of "
-					"range (%u nSec), falling back to a safe one of %u nSec.\n",
+		if (*transition_latency > 10000000 ||
+		    *transition_latency < 50000) {
+			printk(KERN_WARNING PFX "frequency transition "
+					"measured seems out of range (%u "
+					"nSec), falling back to a safe one of"
+					"%u nSec.\n",
 					*transition_latency, 500000);
 			*transition_latency = 500000;
 		}
@@ -436,15 +460,16 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 
 out:
 	local_irq_restore(flags);
-	return (ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(speedstep_get_freqs);
 
 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
 module_param(relaxed_check, int, 0444);
-MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
+MODULE_PARM_DESC(relaxed_check,
+		"Don't do all checks for speedstep capability.");
 #endif
 
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
index b11bcc608ca..2b6c04e5a30 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
@@ -12,17 +12,17 @@
 
 /* processors */
 
-#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY	0x00000001  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_C		0x00000002  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_T		0x00000003  /* Tualatin core */
-#define SPEEDSTEP_PROCESSOR_P4M			0x00000004  /* P4-M  */
+#define SPEEDSTEP_CPU_PIII_C_EARLY	0x00000001  /* Coppermine core */
+#define SPEEDSTEP_CPU_PIII_C		0x00000002  /* Coppermine core */
+#define SPEEDSTEP_CPU_PIII_T		0x00000003  /* Tualatin core */
+#define SPEEDSTEP_CPU_P4M		0x00000004  /* P4-M  */
 
 /* the following processors are not speedstep-capable and are not auto-detected
  * in speedstep_detect_processor(). However, their speed can be detected using
- * the speedstep_get_processor_frequency() call. */
-#define SPEEDSTEP_PROCESSOR_PM			0xFFFFFF03  /* Pentium M  */
-#define SPEEDSTEP_PROCESSOR_P4D			0xFFFFFF04  /* desktop P4  */
-#define SPEEDSTEP_PROCESSOR_PCORE		0xFFFFFF05  /* Core */
+ * the speedstep_get_frequency() call. */
+#define SPEEDSTEP_CPU_PM		0xFFFFFF03  /* Pentium M  */
+#define SPEEDSTEP_CPU_P4D		0xFFFFFF04  /* desktop P4  */
+#define SPEEDSTEP_CPU_PCORE		0xFFFFFF05  /* Core */
 
 /* speedstep states -- only two of them */
 
@@ -34,7 +34,7 @@
 extern unsigned int speedstep_detect_processor (void);
 
 /* detect the current speed (in khz) of the processor */
-extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
+extern unsigned int speedstep_get_frequency(unsigned int processor);
 
 
 /* detect the low and high speeds of the processor. The callback
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index 8a85c93bd62..befea088e4f 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -19,8 +19,8 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 #include <asm/ist.h>
-#include <asm/io.h>
 
 #include "speedstep-lib.h"
 
@@ -30,12 +30,12 @@
  * If user gives it, these are used.
  *
  */
-static int smi_port = 0;
-static int smi_cmd = 0;
-static unsigned int smi_sig = 0;
+static int smi_port;
+static int smi_cmd;
+static unsigned int smi_sig;
 
 /* info about the processor */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor;
 
 /*
  * There are only two frequency states for each processor. Values
@@ -56,12 +56,13 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  * of DMA activity going on? */
 #define SMI_TRIES 5
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-smi", msg)
 
 /**
  * speedstep_smi_ownership
  */
-static int speedstep_smi_ownership (void)
+static int speedstep_smi_ownership(void)
 {
 	u32 command, result, magic, dummy;
 	u32 function = GET_SPEEDSTEP_OWNER;
@@ -70,16 +71,18 @@ static int speedstep_smi_ownership (void)
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 	magic = virt_to_phys(magic_data);
 
-	dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
+	dprintk("trying to obtain ownership with command %x at port %x\n",
+			command, smi_port);
 
 	__asm__ __volatile__(
 		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
 		"pop %%ebp\n"
-		: "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
-			"=S" (dummy)
+		: "=D" (result),
+		  "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+		  "=S" (dummy)
 		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
-			"D" (0), "S" (magic)
+		  "D" (0), "S" (magic)
 		: "memory"
 	);
 
@@ -97,10 +100,10 @@ static int speedstep_smi_ownership (void)
  * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
  * shows that the latter occurs if !(ist_info.event & 0xFFFF).
  */
-static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
+static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
 {
 	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
-	u32 state=0;
+	u32 state = 0;
 	u32 function = GET_SPEEDSTEP_FREQS;
 
 	if (!(ist_info.event & 0xFFFF)) {
@@ -110,17 +113,25 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
+	dprintk("trying to determine frequencies with command %x at port %x\n",
+			command, smi_port);
 
 	__asm__ __volatile__(
 		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
 		"pop %%ebp"
-		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
-		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
+		: "=a" (result),
+		  "=b" (high_mhz),
+		  "=c" (low_mhz),
+		  "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command),
+		  "b" (function),
+		  "c" (state),
+		  "d" (smi_port), "S" (0), "D" (0)
 	);
 
-	dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
+	dprintk("result %x, low_freq %u, high_freq %u\n",
+			result, low_mhz, high_mhz);
 
 	/* abort if results are obviously incorrect... */
 	if ((high_mhz + low_mhz) < 600)
@@ -137,26 +148,30 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
  * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
  *
  */
-static int speedstep_get_state (void)
+static int speedstep_get_state(void)
 {
-	u32 function=GET_SPEEDSTEP_STATE;
+	u32 function = GET_SPEEDSTEP_STATE;
 	u32 result, state, edi, command, dummy;
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
+	dprintk("trying to determine current setting with command %x "
+		"at port %x\n", command, smi_port);
 
 	__asm__ __volatile__(
 		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
 		"pop %%ebp\n"
-		: "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
+		: "=a" (result),
+		  "=b" (state), "=D" (edi),
+		  "=c" (dummy), "=d" (dummy), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0),
+		  "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("state is %x, result is %x\n", state, result);
 
-	return (state & 1);
+	return state & 1;
 }
 
 
@@ -165,11 +180,11 @@ static int speedstep_get_state (void)
  * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
  *
  */
-static void speedstep_set_state (unsigned int state)
+static void speedstep_set_state(unsigned int state)
 {
 	unsigned int result = 0, command, new_state, dummy;
 	unsigned long flags;
-	unsigned int function=SET_SPEEDSTEP_STATE;
+	unsigned int function = SET_SPEEDSTEP_STATE;
 	unsigned int retry = 0;
 
 	if (state > 0x1)
@@ -180,11 +195,14 @@ static void speedstep_set_state (unsigned int state)
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
+	dprintk("trying to set frequency to state %u "
+		"with command %x at port %x\n",
+		state, command, smi_port);
 
 	do {
 		if (retry) {
-			dprintk("retry %u, previous result %u, waiting...\n", retry, result);
+			dprintk("retry %u, previous result %u, waiting...\n",
+					retry, result);
 			mdelay(retry * 50);
 		}
 		retry++;
@@ -192,20 +210,26 @@ static void speedstep_set_state (unsigned int state)
 			"push %%ebp\n"
 			"out %%al, (%%dx)\n"
 			"pop %%ebp"
-			: "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
-				"=d" (dummy), "=S" (dummy)
-			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
+			: "=b" (new_state), "=D" (result),
+			  "=c" (dummy), "=a" (dummy),
+			  "=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state),
+			  "d" (smi_port), "S" (0), "D" (0)
 			);
 	} while ((new_state != state) && (retry <= SMI_TRIES));
 
 	/* enable IRQs */
 	local_irq_restore(flags);
 
-	if (new_state == state) {
-		dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
-	} else {
-		printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
-	}
+	if (new_state == state)
+		dprintk("change to %u MHz succeeded after %u tries "
+			"with result %u\n",
+			(speedstep_freqs[new_state].frequency / 1000),
+			retry, result);
+	else
+		printk(KERN_ERR "cpufreq: change to state %u "
+			"failed with new_state %u and result %u\n",
+			state, new_state, result);
 
 	return;
 }
@@ -219,13 +243,14 @@ static void speedstep_set_state (unsigned int state)
  *
  * Sets a new CPUFreq policy/freq.
  */
-static int speedstep_target (struct cpufreq_policy *policy,
+static int speedstep_target(struct cpufreq_policy *policy,
 			unsigned int target_freq, unsigned int relation)
 {
 	unsigned int newstate = 0;
 	struct cpufreq_freqs freqs;
 
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
@@ -250,7 +275,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
  * Limit must be within speedstep_low_freq and speedstep_high_freq, with
  * at least one border included.
  */
-static int speedstep_verify (struct cpufreq_policy *policy)
+static int speedstep_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
 }
@@ -259,7 +284,8 @@ static int speedstep_verify (struct cpufreq_policy *policy)
 static int speedstep_cpu_init(struct cpufreq_policy *policy)
 {
 	int result;
-	unsigned int speed,state;
+	unsigned int speed, state;
+	unsigned int *low, *high;
 
 	/* capability check */
 	if (policy->cpu != 0)
@@ -272,19 +298,23 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* detect low and high frequency */
-	result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency,
-				&speedstep_freqs[SPEEDSTEP_HIGH].frequency);
+	low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
+	high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
+
+	result = speedstep_smi_get_freqs(low, high);
 	if (result) {
-		/* fall back to speedstep_lib.c dection mechanism: try both states out */
-		dprintk("could not detect low and high frequencies by SMI call.\n");
+		/* fall back to speedstep_lib.c dection mechanism:
+		 * try both states out */
+		dprintk("could not detect low and high frequencies "
+				"by SMI call.\n");
 		result = speedstep_get_freqs(speedstep_processor,
-				&speedstep_freqs[SPEEDSTEP_LOW].frequency,
-				&speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+				low, high,
 				NULL,
 				&speedstep_set_state);
 
 		if (result) {
-			dprintk("could not detect two different speeds -- aborting.\n");
+			dprintk("could not detect two different speeds"
+					" -- aborting.\n");
 			return result;
 		} else
 			dprintk("workaround worked.\n");
@@ -295,7 +325,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 	speed = speedstep_freqs[state].frequency;
 
 	dprintk("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
 		(speed / 1000));
 
 	/* cpuinfo and default policy values */
@@ -304,7 +335,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
 	if (result)
-		return (result);
+		return result;
 
 	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
 
@@ -321,7 +352,7 @@ static unsigned int speedstep_get(unsigned int cpu)
 {
 	if (cpu)
 		return -ENODEV;
-	return speedstep_get_processor_frequency(speedstep_processor);
+	return speedstep_get_frequency(speedstep_processor);
 }
 
 
@@ -335,7 +366,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
 	return result;
 }
 
-static struct freq_attr* speedstep_attr[] = {
+static struct freq_attr *speedstep_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -364,21 +395,23 @@ static int __init speedstep_init(void)
 	speedstep_processor = speedstep_detect_processor();
 
 	switch (speedstep_processor) {
-	case SPEEDSTEP_PROCESSOR_PIII_T:
-	case SPEEDSTEP_PROCESSOR_PIII_C:
-	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
 		break;
 	default:
 		speedstep_processor = 0;
 	}
 
 	if (!speedstep_processor) {
-		dprintk ("No supported Intel CPU detected.\n");
+		dprintk("No supported Intel CPU detected.\n");
 		return -ENODEV;
 	}
 
-	dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
-		ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
+	dprintk("signature:0x%.8lx, command:0x%.8lx, "
+		"event:0x%.8lx, perf_level:0x%.8lx.\n",
+		ist_info.signature, ist_info.command,
+		ist_info.event, ist_info.perf_level);
 
 	/* Error if no IST-SMI BIOS or no PARM
 		 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
@@ -416,17 +449,20 @@ static void __exit speedstep_exit(void)
 	cpufreq_unregister_driver(&speedstep_driver);
 }
 
-module_param(smi_port,  int, 0444);
-module_param(smi_cmd,   int, 0444);
-module_param(smi_sig,  uint, 0444);
+module_param(smi_port, int, 0444);
+module_param(smi_cmd,  int, 0444);
+module_param(smi_sig, uint, 0444);
 
-MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2");
-MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
-MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
+		"-- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
+		"-- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
+		"SMI interface.");
 
-MODULE_AUTHOR ("Hiroshi Miura");
-MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura");
+MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE("GPL");
 
 module_init(speedstep_init);
 module_exit(speedstep_exit);
-- 
cgit v1.2.3


From b9e7638a301b1245d4675087a05fa90fb4fa1845 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sun, 18 Jan 2009 00:32:26 -0500
Subject: [CPUFREQ] checkpatch cleanups for powernow-k7

The asm/timer.h warning can be ignored, it's needed for
recalibrate_cpu_khz()

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 237 +++++++++++++++++-------------
 1 file changed, 137 insertions(+), 100 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index 9cd73d15743..3c28ccd4974 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -6,10 +6,12 @@
  *  Licensed under the terms of the GNU GPL License version 2.
  *  Based upon datasheets & sample CPUs kindly provided by AMD.
  *
- * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
- * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
- * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
- * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ * Errata 5:
+ *  CPU may fail to execute a FID/VID change in presence of interrupt.
+ *  - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15:
+ *  CPU with half frequency multipliers may hang upon wakeup from disconnect.
+ *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
  */
 
 #include <linux/kernel.h>
@@ -20,11 +22,11 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/dmi.h>
+#include <linux/timex.h>
+#include <linux/io.h>
 
+#include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
 #include <asm/msr.h>
-#include <asm/timer.h>
-#include <asm/timex.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
@@ -58,9 +60,9 @@ struct pst_s {
 union powernow_acpi_control_t {
 	struct {
 		unsigned long fid:5,
-		vid:5,
-		sgtc:20,
-		res1:2;
+			vid:5,
+			sgtc:20,
+			res1:2;
 	} bits;
 	unsigned long val;
 };
@@ -101,7 +103,8 @@ static unsigned int fsb;
 static unsigned int latency;
 static char have_a0;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"powernow-k7", msg)
 
 static int check_fsb(unsigned int fsbspeed)
 {
@@ -109,7 +112,7 @@ static int check_fsb(unsigned int fsbspeed)
 	unsigned int f = fsb / 1000;
 
 	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
-	return (delta < 5);
+	return delta < 5;
 }
 
 static int check_powernow(void)
@@ -117,24 +120,26 @@ static int check_powernow(void)
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	unsigned int maxei, eax, ebx, ecx, edx;
 
-	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
 #ifdef MODULE
-		printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
+		printk(KERN_INFO PFX "This module only works with "
+				"AMD K7 CPUs\n");
 #endif
 		return 0;
 	}
 
 	/* Get maximum capabilities */
-	maxei = cpuid_eax (0x80000000);
+	maxei = cpuid_eax(0x80000000);
 	if (maxei < 0x80000007) {	/* Any powernow info ? */
 #ifdef MODULE
-		printk (KERN_INFO PFX "No powernow capabilities detected\n");
+		printk(KERN_INFO PFX "No powernow capabilities detected\n");
 #endif
 		return 0;
 	}
 
 	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
-		printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
+		printk(KERN_INFO PFX "K7 660[A0] core detected, "
+				"enabling errata workarounds\n");
 		have_a0 = 1;
 	}
 
@@ -144,37 +149,42 @@ static int check_powernow(void)
 	if (!(edx & (1 << 1 | 1 << 2)))
 		return 0;
 
-	printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+	printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
 
 	if (edx & 1 << 1) {
-		printk ("frequency");
-		can_scale_bus=1;
+		printk("frequency");
+		can_scale_bus = 1;
 	}
 
 	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
-		printk (" and ");
+		printk(" and ");
 
 	if (edx & 1 << 2) {
-		printk ("voltage");
-		can_scale_vid=1;
+		printk("voltage");
+		can_scale_vid = 1;
 	}
 
-	printk (".\n");
+	printk(".\n");
 	return 1;
 }
 
+static void invalidate_entry(unsigned int entry)
+{
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
 
-static int get_ranges (unsigned char *pst)
+static int get_ranges(unsigned char *pst)
 {
 	unsigned int j;
 	unsigned int speed;
 	u8 fid, vid;
 
-	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
+				(number_scales + 1)), GFP_KERNEL);
 	if (!powernow_table)
 		return -ENOMEM;
 
-	for (j=0 ; j < number_scales; j++) {
+	for (j = 0 ; j < number_scales; j++) {
 		fid = *pst++;
 
 		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
@@ -182,10 +192,10 @@ static int get_ranges (unsigned char *pst)
 
 		speed = powernow_table[j].frequency;
 
-		if ((fid_codes[fid] % 10)==5) {
+		if ((fid_codes[fid] % 10) == 5) {
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
 			if (have_a0 == 1)
-				powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
+				invalidate_entry(j);
 #endif
 		}
 
@@ -197,7 +207,7 @@ static int get_ranges (unsigned char *pst)
 		vid = *pst++;
 		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
 
-		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+		dprintk("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
 			 fid_codes[fid] % 10, speed/1000, vid,
 			 mobile_vid_table[vid]/1000,
@@ -214,13 +224,13 @@ static void change_FID(int fid)
 {
 	union msr_fidvidctl fidvidctl;
 
-	rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	if (fidvidctl.bits.FID != fid) {
 		fidvidctl.bits.SGTC = latency;
 		fidvidctl.bits.FID = fid;
 		fidvidctl.bits.VIDC = 0;
 		fidvidctl.bits.FIDC = 1;
-		wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	}
 }
 
@@ -229,18 +239,18 @@ static void change_VID(int vid)
 {
 	union msr_fidvidctl fidvidctl;
 
-	rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	if (fidvidctl.bits.VID != vid) {
 		fidvidctl.bits.SGTC = latency;
 		fidvidctl.bits.VID = vid;
 		fidvidctl.bits.FIDC = 0;
 		fidvidctl.bits.VIDC = 1;
-		wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	}
 }
 
 
-static void change_speed (unsigned int index)
+static void change_speed(unsigned int index)
 {
 	u8 fid, vid;
 	struct cpufreq_freqs freqs;
@@ -257,7 +267,7 @@ static void change_speed (unsigned int index)
 
 	freqs.cpu = 0;
 
-	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 	cfid = fidvidstatus.bits.CFID;
 	freqs.old = fsb * fid_codes[cfid] / 10;
 
@@ -321,12 +331,14 @@ static int powernow_acpi_init(void)
 		goto err1;
 	}
 
-	if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+	if (acpi_processor_perf->control_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
 		retval = -ENODEV;
 		goto err2;
 	}
 
-	if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+	if (acpi_processor_perf->status_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
 		retval = -ENODEV;
 		goto err2;
 	}
@@ -338,7 +350,8 @@ static int powernow_acpi_init(void)
 		goto err2;
 	}
 
-	powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
+				(number_scales + 1)), GFP_KERNEL);
 	if (!powernow_table) {
 		retval = -ENOMEM;
 		goto err2;
@@ -352,7 +365,7 @@ static int powernow_acpi_init(void)
 		unsigned int speed, speed_mhz;
 
 		pc.val = (unsigned long) state->control;
-		dprintk ("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+		dprintk("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
 			 i,
 			 (u32) state->core_frequency,
 			 (u32) state->power,
@@ -381,12 +394,12 @@ static int powernow_acpi_init(void)
 		if (speed % 1000 > 0)
 			speed_mhz++;
 
-		if ((fid_codes[fid] % 10)==5) {
+		if ((fid_codes[fid] % 10) == 5) {
 			if (have_a0 == 1)
-				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+				invalidate_entry(i);
 		}
 
-		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+		dprintk("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
 			 fid_codes[fid] % 10, speed_mhz, vid,
 			 mobile_vid_table[vid]/1000,
@@ -422,7 +435,8 @@ err1:
 err05:
 	kfree(acpi_processor_perf);
 err0:
-	printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
+	printk(KERN_WARNING PFX "ACPI perflib can not be used on "
+			"this platform\n");
 	acpi_processor_perf = NULL;
 	return retval;
 }
@@ -435,7 +449,14 @@ static int powernow_acpi_init(void)
 }
 #endif
 
-static int powernow_decode_bios (int maxfid, int startvid)
+static void print_pst_entry(struct pst_s *pst, unsigned int j)
+{
+	dprintk("PST:%d (@%p)\n", j, pst);
+	dprintk(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
+		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+}
+
+static int powernow_decode_bios(int maxfid, int startvid)
 {
 	struct psb_s *psb;
 	struct pst_s *pst;
@@ -446,61 +467,67 @@ static int powernow_decode_bios (int maxfid, int startvid)
 
 	etuple = cpuid_eax(0x80000001);
 
-	for (i=0xC0000; i < 0xffff0 ; i+=16) {
+	for (i = 0xC0000; i < 0xffff0 ; i += 16) {
 
 		p = phys_to_virt(i);
 
-		if (memcmp(p, "AMDK7PNOW!",  10) == 0){
-			dprintk ("Found PSB header at %p\n", p);
+		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
+			dprintk("Found PSB header at %p\n", p);
 			psb = (struct psb_s *) p;
-			dprintk ("Table version: 0x%x\n", psb->tableversion);
+			dprintk("Table version: 0x%x\n", psb->tableversion);
 			if (psb->tableversion != 0x12) {
-				printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
+				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
+						" supported right now\n");
 				return -ENODEV;
 			}
 
-			dprintk ("Flags: 0x%x\n", psb->flags);
-			if ((psb->flags & 1)==0) {
-				dprintk ("Mobile voltage regulator\n");
-			} else {
-				dprintk ("Desktop voltage regulator\n");
-			}
+			dprintk("Flags: 0x%x\n", psb->flags);
+			if ((psb->flags & 1) == 0)
+				dprintk("Mobile voltage regulator\n");
+			else
+				dprintk("Desktop voltage regulator\n");
 
 			latency = psb->settlingtime;
 			if (latency < 100) {
-				printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. "
-						"Should be at least 100. Correcting.\n", latency);
+				printk(KERN_INFO PFX "BIOS set settling time "
+						"to %d microseconds. "
+						"Should be at least 100. "
+						"Correcting.\n", latency);
 				latency = 100;
 			}
-			dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
-			dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
+			dprintk("Settling Time: %d microseconds.\n",
+					psb->settlingtime);
+			dprintk("Has %d PST tables. (Only dumping ones "
+					"relevant to this CPU).\n",
+					psb->numpst);
 
-			p += sizeof (struct psb_s);
+			p += sizeof(struct psb_s);
 
 			pst = (struct pst_s *) p;
 
-			for (j=0; j<psb->numpst; j++) {
+			for (j = 0; j < psb->numpst; j++) {
 				pst = (struct pst_s *) p;
 				number_scales = pst->numpstates;
 
-				if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
-				    (maxfid==pst->maxfid) && (startvid==pst->startvid))
-				{
-					dprintk ("PST:%d (@%p)\n", j, pst);
-					dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
-						 pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
-
-					ret = get_ranges ((char *) pst + sizeof (struct pst_s));
+				if ((etuple == pst->cpuid) &&
+				    check_fsb(pst->fsbspeed) &&
+				    (maxfid == pst->maxfid) &&
+				    (startvid == pst->startvid)) {
+					print_pst_entry(pst, j);
+					p = (char *)pst + sizeof(struct pst_s);
+					ret = get_ranges(p);
 					return ret;
 				} else {
 					unsigned int k;
-					p = (char *) pst + sizeof (struct pst_s);
-					for (k=0; k<number_scales; k++)
-						p+=2;
+					p = (char *)pst + sizeof(struct pst_s);
+					for (k = 0; k < number_scales; k++)
+						p += 2;
 				}
 			}
-			printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
-			printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");
+			printk(KERN_INFO PFX "No PST tables match this cpuid "
+					"(0x%x)\n", etuple);
+			printk(KERN_INFO PFX "This is indicative of a broken "
+					"BIOS.\n");
 
 			return -EINVAL;
 		}
@@ -511,13 +538,14 @@ static int powernow_decode_bios (int maxfid, int startvid)
 }
 
 
-static int powernow_target (struct cpufreq_policy *policy,
+static int powernow_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
 {
 	unsigned int newstate;
 
-	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
+				relation, &newstate))
 		return -EINVAL;
 
 	change_speed(newstate);
@@ -526,7 +554,7 @@ static int powernow_target (struct cpufreq_policy *policy,
 }
 
 
-static int powernow_verify (struct cpufreq_policy *policy)
+static int powernow_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, powernow_table);
 }
@@ -566,18 +594,23 @@ static unsigned int powernow_get(unsigned int cpu)
 
 	if (cpu)
 		return 0;
-	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 	cfid = fidvidstatus.bits.CFID;
 
-	return (fsb * fid_codes[cfid] / 10);
+	return fsb * fid_codes[cfid] / 10;
 }
 
 
 static int __init acer_cpufreq_pst(const struct dmi_system_id *d)
 {
-	printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
-	printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
-	printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
+	printk(KERN_WARNING PFX
+		"%s laptop with broken PST tables in BIOS detected.\n",
+		d->ident);
+	printk(KERN_WARNING PFX
+		"You need to downgrade to 3A21 (09/09/2002), or try a newer "
+		"BIOS than 3A71 (01/20/2003)\n");
+	printk(KERN_WARNING PFX
+		"cpufreq scaling has been disabled as a result of this.\n");
 	return 0;
 }
 
@@ -598,7 +631,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = {
 	{ }
 };
 
-static int __init powernow_cpu_init (struct cpufreq_policy *policy)
+static int __init powernow_cpu_init(struct cpufreq_policy *policy)
 {
 	union msr_fidvidstatus fidvidstatus;
 	int result;
@@ -606,7 +639,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	if (policy->cpu != 0)
 		return -ENODEV;
 
-	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 
 	recalibrate_cpu_khz();
 
@@ -618,19 +651,21 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	dprintk("FSB: %3dMHz\n", fsb/1000);
 
 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
-		printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");
+		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
+				"Trying ACPI instead\n");
 		result = powernow_acpi_init();
 	} else {
-		result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
+		result = powernow_decode_bios(fidvidstatus.bits.MFID,
+				fidvidstatus.bits.SVID);
 		if (result) {
-			printk (KERN_INFO PFX "Trying ACPI perflib\n");
+			printk(KERN_INFO PFX "Trying ACPI perflib\n");
 			maximum_speed = 0;
 			minimum_speed = -1;
 			latency = 0;
 			result = powernow_acpi_init();
 			if (result) {
-				printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
-				printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n");
+				printk(KERN_INFO PFX
+					"ACPI and legacy methods failed\n");
 			}
 		} else {
 			/* SGTC use the bus clock as timer */
@@ -642,10 +677,11 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	if (result)
 		return result;
 
-	printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
+	printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
 				minimum_speed/1000, maximum_speed/1000);
 
-	policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
+	policy->cpuinfo.transition_latency =
+		cpufreq_scale(2000000UL, fsb, latency);
 
 	policy->cur = powernow_get(0);
 
@@ -654,7 +690,8 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
 }
 
-static int powernow_cpu_exit (struct cpufreq_policy *policy) {
+static int powernow_cpu_exit(struct cpufreq_policy *policy)
+{
 	cpufreq_frequency_table_put_attr(policy->cpu);
 
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
@@ -669,7 +706,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) {
 	return 0;
 }
 
-static struct freq_attr* powernow_table_attr[] = {
+static struct freq_attr *powernow_table_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -685,15 +722,15 @@ static struct cpufreq_driver powernow_driver = {
 	.attr	= powernow_table_attr,
 };
 
-static int __init powernow_init (void)
+static int __init powernow_init(void)
 {
-	if (check_powernow()==0)
+	if (check_powernow() == 0)
 		return -ENODEV;
 	return cpufreq_register_driver(&powernow_driver);
 }
 
 
-static void __exit powernow_exit (void)
+static void __exit powernow_exit(void)
 {
 	cpufreq_unregister_driver(&powernow_driver);
 }
@@ -701,9 +738,9 @@ static void __exit powernow_exit (void)
 module_param(acpi_force,  int, 0444);
 MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
-MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE("GPL");
 
 late_initcall(powernow_init);
 module_exit(powernow_exit);
-- 
cgit v1.2.3


From 0e64a0c982c06a6b8f5e2a7f29eb108fdf257b2f Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Wed, 4 Feb 2009 14:37:50 -0500
Subject: [CPUFREQ] checkpatch cleanups for powernow-k8

This driver has so many long function names, and deep nested if's
The remaining warnings will need some code restructuring to clean up.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 351 +++++++++++++++++++-----------
 1 file changed, 226 insertions(+), 125 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 6428aa17b40..4dd7e3bdee2 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -33,10 +33,10 @@
 #include <linux/string.h>
 #include <linux/cpumask.h>
 #include <linux/sched.h>	/* for current / set_cpus_allowed() */
+#include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/delay.h>
 
 #ifdef CONFIG_X86_POWERNOW_K8_ACPI
 #include <linux/acpi.h>
@@ -71,7 +71,8 @@ static u32 find_khz_freq_from_fid(u32 fid)
 	return 1000 * find_freq_from_fid(fid);
 }
 
-static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate)
+static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data,
+		u32 pstate)
 {
 	return data[pstate].frequency;
 }
@@ -186,7 +187,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 		return 1;
 	}
 
-	lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+	lo = fid;
+	lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
 
 	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
@@ -194,7 +197,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	do {
 		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
 		if (i++ > 100) {
-			printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n");
+			printk(KERN_ERR PFX
+				"Hardware error - pending bit very stuck - "
+				"no further pstate changes possible\n");
 			return 1;
 		}
 	} while (query_current_values_with_pending_wait(data));
@@ -202,14 +207,16 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	count_off_irt(data);
 
 	if (savevid != data->currvid) {
-		printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n",
-		       savevid, data->currvid);
+		printk(KERN_ERR PFX
+			"vid change on fid trans, old 0x%x, new 0x%x\n",
+			savevid, data->currvid);
 		return 1;
 	}
 
 	if (fid != data->currfid) {
-		printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
-		        data->currfid);
+		printk(KERN_ERR PFX
+			"fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+			data->currfid);
 		return 1;
 	}
 
@@ -228,7 +235,9 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 		return 1;
 	}
 
-	lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+	lo = data->currfid;
+	lo |= (vid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
 
 	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
@@ -236,20 +245,24 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 	do {
 		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
 		if (i++ > 100) {
-			printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+			printk(KERN_ERR PFX "internal error - pending bit "
+					"very stuck - no further pstate "
+					"changes possible\n");
 			return 1;
 		}
 	} while (query_current_values_with_pending_wait(data));
 
 	if (savefid != data->currfid) {
-		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
+		printk(KERN_ERR PFX "fid changed on vid trans, old "
+			"0x%x new 0x%x\n",
 		       savefid, data->currfid);
 		return 1;
 	}
 
 	if (vid != data->currvid) {
-		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid,
-				data->currvid);
+		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, "
+				"curr 0x%x\n",
+				vid, data->currvid);
 		return 1;
 	}
 
@@ -261,7 +274,8 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
  * Decreasing vid codes represent increasing voltages:
  * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
  */
-static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
+static int decrease_vid_code_by_step(struct powernow_k8_data *data,
+		u32 reqvid, u32 step)
 {
 	if ((data->currvid - reqvid) > step)
 		reqvid = data->currvid - step;
@@ -283,7 +297,8 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 }
 
 /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
-static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
+static int transition_fid_vid(struct powernow_k8_data *data,
+		u32 reqfid, u32 reqvid)
 {
 	if (core_voltage_pre_transition(data, reqvid))
 		return 1;
@@ -298,7 +313,8 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req
 		return 1;
 
 	if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
-		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, "
+				"curr 0x%x 0x%x\n",
 				smp_processor_id(),
 				reqfid, reqvid, data->currfid, data->currvid);
 		return 1;
@@ -311,13 +327,15 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req
 }
 
 /* Phase 1 - core voltage transition ... setup voltage */
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid)
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+		u32 reqvid)
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
 	u32 maxvid, lo;
 
-	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
+		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
@@ -340,7 +358,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 		} else {
 			dprintk("ph1: changing vid for rvo, req 0x%x\n",
 				data->currvid - 1);
-			if (decrease_vid_code_by_step(data, data->currvid - 1, 1))
+			if (decrease_vid_code_by_step(data, data->currvid-1, 1))
 				return 1;
 			rvosteps--;
 		}
@@ -350,7 +368,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 		return 1;
 
 	if (savefid != data->currfid) {
-		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid);
+		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n",
+				data->currfid);
 		return 1;
 	}
 
@@ -363,20 +382,24 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 /* Phase 2 - core frequency transition */
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 {
-	u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
+	u32 vcoreqfid, vcocurrfid, vcofiddiff;
+	u32 fid_interval, savevid = data->currvid;
 
-	if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
-			reqfid, data->currfid);
+	if ((reqfid < HI_FID_TABLE_BOTTOM) &&
+	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
+		printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
+				"0x%x 0x%x\n", reqfid, data->currfid);
 		return 1;
 	}
 
 	if (data->currfid == reqfid) {
-		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid);
+		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
+				data->currfid);
 		return 0;
 	}
 
-	dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+	dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
+		"reqfid 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqfid);
 
@@ -390,14 +413,14 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 
 		if (reqfid > data->currfid) {
 			if (data->currfid > LO_FID_TABLE_TOP) {
-				if (write_new_fid(data, data->currfid + fid_interval)) {
+				if (write_new_fid(data,
+						data->currfid + fid_interval))
 					return 1;
-				}
 			} else {
 				if (write_new_fid
-				    (data, 2 + convert_fid_to_vco_fid(data->currfid))) {
+				    (data,
+				     2 + convert_fid_to_vco_fid(data->currfid)))
 					return 1;
-				}
 			}
 		} else {
 			if (write_new_fid(data, data->currfid - fid_interval))
@@ -417,7 +440,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 
 	if (data->currfid != reqfid) {
 		printk(KERN_ERR PFX
-			"ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+			"ph2: mismatch, failed fid transition, "
+			"curr 0x%x, req 0x%x\n",
 			data->currfid, reqfid);
 		return 1;
 	}
@@ -435,7 +459,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 }
 
 /* Phase 3 - core voltage transition flow ... jump to the final vid. */
-static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid)
+static int core_voltage_post_transition(struct powernow_k8_data *data,
+		u32 reqvid)
 {
 	u32 savefid = data->currfid;
 	u32 savereqvid = reqvid;
@@ -457,7 +482,8 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 
 		if (data->currvid != reqvid) {
 			printk(KERN_ERR PFX
-			       "ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+			       "ph3: failed vid transition\n, "
+			       "req 0x%x, curr 0x%x",
 			       reqvid, data->currvid);
 			return 1;
 		}
@@ -508,7 +534,8 @@ static int check_supported_cpu(unsigned int cpu)
 	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
 		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
 		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
-			printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+			printk(KERN_INFO PFX
+				"Processor cpuid %x not supported\n", eax);
 			goto out;
 		}
 
@@ -520,8 +547,10 @@ static int check_supported_cpu(unsigned int cpu)
 		}
 
 		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
-		if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
-			printk(KERN_INFO PFX "Power state transitions not supported\n");
+		if ((edx & P_STATE_TRANSITION_CAPABLE)
+			!= P_STATE_TRANSITION_CAPABLE) {
+			printk(KERN_INFO PFX
+				"Power state transitions not supported\n");
 			goto out;
 		}
 	} else { /* must be a HW Pstate capable processor */
@@ -539,7 +568,8 @@ out:
 	return rc;
 }
 
-static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
+		u8 maxvid)
 {
 	unsigned int j;
 	u8 lastfid = 0xff;
@@ -550,12 +580,14 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
 			       j, pst[j].vid);
 			return -EINVAL;
 		}
-		if (pst[j].vid < data->rvo) {	/* vid + rvo >= 0 */
+		if (pst[j].vid < data->rvo) {
+			/* vid + rvo >= 0 */
 			printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
 			       " %d\n", j);
 			return -ENODEV;
 		}
-		if (pst[j].vid < maxvid + data->rvo) {	/* vid + rvo >= maxvid */
+		if (pst[j].vid < maxvid + data->rvo) {
+			/* vid + rvo >= maxvid */
 			printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
 			       " %d\n", j);
 			return -ENODEV;
@@ -579,23 +611,31 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
 		return -EINVAL;
 	}
 	if (lastfid > LO_FID_TABLE_TOP)
-		printk(KERN_INFO FW_BUG PFX  "first fid not from lo freq table\n");
+		printk(KERN_INFO FW_BUG PFX
+			"first fid not from lo freq table\n");
 
 	return 0;
 }
 
+static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry)
+{
+	data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+
 static void print_basics(struct powernow_k8_data *data)
 {
 	int j;
 	for (j = 0; j < data->numps; j++) {
-		if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) {
+		if (data->powernow_table[j].frequency !=
+				CPUFREQ_ENTRY_INVALID) {
 			if (cpu_family == CPU_HW_PSTATE) {
-				printk(KERN_INFO PFX "   %d : pstate %d (%d MHz)\n",
-					j,
+				printk(KERN_INFO PFX
+					"   %d : pstate %d (%d MHz)\n", j,
 					data->powernow_table[j].index,
 					data->powernow_table[j].frequency/1000);
 			} else {
-				printk(KERN_INFO PFX "   %d : fid 0x%x (%d MHz), vid 0x%x\n",
+				printk(KERN_INFO PFX
+					"   %d : fid 0x%x (%d MHz), vid 0x%x\n",
 					j,
 					data->powernow_table[j].index & 0xff,
 					data->powernow_table[j].frequency/1000,
@@ -604,20 +644,25 @@ static void print_basics(struct powernow_k8_data *data)
 		}
 	}
 	if (data->batps)
-		printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
+		printk(KERN_INFO PFX "Only %d pstates on battery\n",
+				data->batps);
 }
 
-static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+static int fill_powernow_table(struct powernow_k8_data *data,
+		struct pst_s *pst, u8 maxvid)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	unsigned int j;
 
-	if (data->batps) {    /* use ACPI support to get full speed on mains power */
-		printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps);
+	if (data->batps) {
+		/* use ACPI support to get full speed on mains power */
+		printk(KERN_WARNING PFX
+			"Only %d pstates usable (use ACPI driver for full "
+			"range\n", data->batps);
 		data->numps = data->batps;
 	}
 
-	for ( j=1; j<data->numps; j++ ) {
+	for (j = 1; j < data->numps; j++) {
 		if (pst[j-1].fid >= pst[j].fid) {
 			printk(KERN_ERR PFX "PST out of sequence\n");
 			return -EINVAL;
@@ -640,9 +685,11 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst,
 	}
 
 	for (j = 0; j < data->numps; j++) {
+		int freq;
 		powernow_table[j].index = pst[j].fid; /* lower 8 bits */
 		powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
-		powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid);
+		freq = find_khz_freq_from_fid(pst[j].fid);
+		powernow_table[j].frequency = freq;
 	}
 	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
 	powernow_table[data->numps].index = 0;
@@ -658,7 +705,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst,
 		print_basics(data);
 
 	for (j = 0; j < data->numps; j++)
-		if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
+		if ((pst[j].fid == data->currfid) &&
+		    (pst[j].vid == data->currvid))
 			return 0;
 
 	dprintk("currfid/vid do not match PST, ignoring\n");
@@ -698,7 +746,8 @@ static int find_psb_table(struct powernow_k8_data *data)
 		}
 
 		data->vstable = psb->vstable;
-		dprintk("voltage stabilization time: %d(*20us)\n", data->vstable);
+		dprintk("voltage stabilization time: %d(*20us)\n",
+				data->vstable);
 
 		dprintk("flags2: 0x%x\n", psb->flags2);
 		data->rvo = psb->flags2 & 3;
@@ -713,11 +762,12 @@ static int find_psb_table(struct powernow_k8_data *data)
 
 		dprintk("numpst: 0x%x\n", psb->num_tables);
 		cpst = psb->num_tables;
-		if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){
+		if ((psb->cpuid == 0x00000fc0) ||
+		    (psb->cpuid == 0x00000fe0)) {
 			thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-			if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) {
+			if ((thiscpuid == 0x00000fc0) ||
+			    (thiscpuid == 0x00000fe0))
 				cpst = 1;
-			}
 		}
 		if (cpst != 1) {
 			printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
@@ -732,7 +782,8 @@ static int find_psb_table(struct powernow_k8_data *data)
 
 		data->numps = psb->numps;
 		dprintk("numpstates: 0x%x\n", data->numps);
-		return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid);
+		return fill_powernow_table(data,
+				(struct pst_s *)(psb+1), maxvid);
 	}
 	/*
 	 * If you see this message, complain to BIOS manufacturer. If
@@ -750,23 +801,27 @@ static int find_psb_table(struct powernow_k8_data *data)
 }
 
 #ifdef CONFIG_X86_POWERNOW_K8_ACPI
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
+		unsigned int index)
 {
+	acpi_integer control;
+
 	if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
 		return;
 
-	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
-	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
-	data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
-	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
-	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
-	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
-}
+	control = data->acpi_data.states[index].control; data->irt = (control
+			>> IRT_SHIFT) & IRT_MASK; data->rvo = (control >>
+				RVO_SHIFT) & RVO_MASK; data->exttype = (control
+					>> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+	data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1
+		<< ((control >> MVS_SHIFT) & MVS_MASK); data->vstable =
+		(control >> VST_SHIFT) & VST_MASK; }
 
 static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	int ret_val = -ENODEV;
+	acpi_integer space_id;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
 		dprintk("register performance failed: bad ACPI data\n");
@@ -779,11 +834,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		goto err_out;
 	}
 
-	if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-		(data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+	space_id = data->acpi_data.control_register.space_id;
+	if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+		(space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 		dprintk("Invalid control/status registers (%x - %x)\n",
 			data->acpi_data.control_register.space_id,
-			data->acpi_data.status_register.space_id);
+			space_id);
 		goto err_out;
 	}
 
@@ -802,7 +858,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	if (ret_val)
 		goto err_out_mem;
 
-	powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->acpi_data.state_count].frequency =
+		CPUFREQ_TABLE_END;
 	powernow_table[data->acpi_data.state_count].index = 0;
 	data->powernow_table = powernow_table;
 
@@ -830,13 +887,15 @@ err_out_mem:
 err_out:
 	acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
 
-	/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+	/* data->acpi_data.state_count informs us at ->exit()
+	 * whether ACPI was used */
 	data->acpi_data.state_count = 0;
 
 	return ret_val;
 }
 
-static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+static int fill_powernow_table_pstate(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
 	u32 hi = 0, lo = 0;
@@ -848,84 +907,101 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
 
 		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
 		if (index > data->max_hw_pstate) {
-			printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
-			printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			printk(KERN_ERR PFX "invalid pstate %d - "
+					"bad value %d.\n", i, index);
+			printk(KERN_ERR PFX "Please report to BIOS "
+					"manufacturer\n");
+			invalidate_entry(data, i);
 			continue;
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
 			dprintk("invalid pstate %d, ignoring\n", index);
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			invalidate_entry(data, i);
 			continue;
 		}
 
 		powernow_table[i].index = index;
 
-		powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+		powernow_table[i].frequency =
+			data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
 
-static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
 	int cntlofreq = 0;
+
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 fid;
 		u32 vid;
+		u32 freq, index;
+		acpi_integer status, control;
 
 		if (data->exttype) {
-			fid = data->acpi_data.states[i].status & EXT_FID_MASK;
-			vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+			status =  data->acpi_data.states[i].status;
+			fid = status & EXT_FID_MASK;
+			vid = (status >> VID_SHIFT) & EXT_VID_MASK;
 		} else {
-			fid = data->acpi_data.states[i].control & FID_MASK;
-			vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+			control =  data->acpi_data.states[i].control;
+			fid = control & FID_MASK;
+			vid = (control >> VID_SHIFT) & VID_MASK;
 		}
 
 		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
-		powernow_table[i].index = fid; /* lower 8 bits */
-		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
-		powernow_table[i].frequency = find_khz_freq_from_fid(fid);
+		index = fid | (vid<<8);
+		powernow_table[i].index = index;
+
+		freq = find_khz_freq_from_fid(fid);
+		powernow_table[i].frequency = freq;
 
 		/* verify frequency is OK */
-		if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) ||
-			(powernow_table[i].frequency < (MIN_FREQ * 1000))) {
-			dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency);
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
+			dprintk("invalid freq %u kHz, ignoring\n", freq);
+			invalidate_entry(data, i);
 			continue;
 		}
 
-		/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
+		/* verify voltage is OK -
+		 * BIOSs are using "off" to indicate invalid */
 		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			invalidate_entry(data, i);
 			continue;
 		}
 
 		/* verify only 1 entry from the lo frequency table */
 		if (fid < HI_FID_TABLE_BOTTOM) {
 			if (cntlofreq) {
-				/* if both entries are the same, ignore this one ... */
-				if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
-				    (powernow_table[i].index != powernow_table[cntlofreq].index)) {
-					printk(KERN_ERR PFX "Too many lo freq table entries\n");
+				/* if both entries are the same,
+				 * ignore this one ... */
+				if ((freq != powernow_table[cntlofreq].frequency) ||
+				    (index != powernow_table[cntlofreq].index)) {
+					printk(KERN_ERR PFX
+						"Too many lo freq table "
+						"entries\n");
 					return 1;
 				}
 
-				dprintk("double low frequency table entry, ignoring it.\n");
-				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+				dprintk("double low frequency table entry, "
+						"ignoring it.\n");
+				invalidate_entry(data, i);
 				continue;
 			} else
 				cntlofreq = i;
 		}
 
-		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
-			printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
-				powernow_table[i].frequency,
-				(unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
+			printk(KERN_INFO PFX "invalid freq entries "
+				"%u kHz vs. %u kHz\n", freq,
+				(unsigned int)
+				(data->acpi_data.states[i].core_frequency
+				 * 1000));
+			invalidate_entry(data, i);
 			continue;
 		}
 	}
@@ -935,7 +1011,8 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
 static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
 {
 	if (data->acpi_data.state_count)
-		acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+		acpi_processor_unregister_performance(&data->acpi_data,
+				data->cpu);
 	free_cpumask_var(data->acpi_data.shared_cpu_map);
 }
 
@@ -954,14 +1031,25 @@ static int get_transition_latency(struct powernow_k8_data *data)
 }
 
 #else
-static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
-static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
+{
+	return -ENODEV;
+}
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
+{
+	return;
+}
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
+		unsigned int index)
+{
+	return;
+}
 static int get_transition_latency(struct powernow_k8_data *data) { return 0; }
 #endif /* CONFIG_X86_POWERNOW_K8_ACPI */
 
 /* Take a frequency, and issue the fid/vid transition command */
-static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_fidvid(struct powernow_k8_data *data,
+		unsigned int index)
 {
 	u32 fid = 0;
 	u32 vid = 0;
@@ -989,7 +1077,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 		return 0;
 	}
 
-	if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+	if ((fid < HI_FID_TABLE_BOTTOM) &&
+	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
 		printk(KERN_ERR PFX
 		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
 		       data->currfid, fid);
@@ -1017,7 +1106,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 }
 
 /* Take a frequency, and issue the hardware pstate transition command */
-static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_pstate(struct powernow_k8_data *data,
+		unsigned int index)
 {
 	u32 pstate = 0;
 	int res, i;
@@ -1029,7 +1119,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	pstate = index & HW_PSTATE_MASK;
 	if (pstate > data->max_hw_pstate)
 		return 0;
-	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+	freqs.old = find_khz_freq_from_pstate(data->powernow_table,
+			data->currpstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
 	for_each_cpu_mask_nr(i, *(data->available_cores)) {
@@ -1048,7 +1139,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 }
 
 /* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
+static int powernowk8_target(struct cpufreq_policy *pol,
+		unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask;
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
@@ -1087,14 +1179,18 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 		dprintk("targ: curr fid 0x%x, vid 0x%x\n",
 		data->currfid, data->currvid);
 
-		if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+		if ((checkvid != data->currvid) ||
+		    (checkfid != data->currfid)) {
 			printk(KERN_INFO PFX
-				"error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
-				checkfid, data->currfid, checkvid, data->currvid);
+				"error - out of sync, fix 0x%x 0x%x, "
+				"vid 0x%x 0x%x\n",
+				checkfid, data->currfid,
+				checkvid, data->currvid);
 		}
 	}
 
-	if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
+	if (cpufreq_frequency_table_target(pol, data->powernow_table,
+				targfreq, relation, &newstate))
 		goto err_out;
 
 	mutex_lock(&fidvid_mutex);
@@ -1114,7 +1210,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	mutex_unlock(&fidvid_mutex);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+				newstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	ret = 0;
@@ -1164,10 +1261,11 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 */
 		if (num_online_cpus() != 1) {
 #ifndef CONFIG_ACPI_PROCESSOR
-			printk(KERN_ERR PFX "ACPI Processor support is required "
-			       "for SMP systems but is absent. Please load the "
-			       "ACPI Processor module before starting this "
-			       "driver.\n");
+			printk(KERN_ERR PFX
+				"ACPI Processor support is required for "
+				"SMP systems but is absent. Please load the "
+				"ACPI Processor module before starting this "
+				"driver.\n");
 #else
 			printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
 			       " ACPI _PSS objects in a way that Linux "
@@ -1228,7 +1326,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	data->available_cores = pol->cpus;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+				data->currpstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	dprintk("policy current frequency %d kHz\n", pol->cur);
@@ -1245,7 +1344,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate);
+		dprintk("cpu_init done, current pstate 0x%x\n",
+				data->currpstate);
 	else
 		dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 			data->currfid, data->currvid);
@@ -1262,7 +1362,7 @@ err_out:
 	return -ENODEV;
 }
 
-static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
+static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 
@@ -1279,7 +1379,7 @@ static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
 	return 0;
 }
 
-static unsigned int powernowk8_get (unsigned int cpu)
+static unsigned int powernowk8_get(unsigned int cpu)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = current->cpus_allowed;
@@ -1315,7 +1415,7 @@ out:
 	return khz;
 }
 
-static struct freq_attr* powernow_k8_attr[] = {
+static struct freq_attr *powernow_k8_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -1360,7 +1460,8 @@ static void __exit powernowk8_exit(void)
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
 }
 
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and "
+		"Mark Langsdorf <mark.langsdorf@amd.com>");
 MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
 MODULE_LICENSE("GPL");
 
-- 
cgit v1.2.3


From 57f4fa699195b761cbea90db5e38b4bc15610c7c Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Wed, 4 Feb 2009 01:17:45 +0100
Subject: [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI
 support

powernow-k8 driver should always try to get cpufreq info from ACPI.
Otherwise it will not be able to detect the transition latency correctly
which results in ondemand governor taking a wrong sampling rate which will
then result in sever performance loss.

Let the user not shoot himself in the foot and always compile in ACPI
support for powernow-k8.

This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and
#ifndef CONFIG_ACPI_PROCESSOR
path is chosen.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/Kconfig       | 19 ++-----------------
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 28 ----------------------------
 arch/x86/kernel/cpu/cpufreq/powernow-k8.h |  5 +----
 3 files changed, 3 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index 65792c2cc46..52c83987547 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -87,30 +87,15 @@ config X86_POWERNOW_K7_ACPI
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on ACPI && ACPI_PROCESSOR
 	help
-	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+	  This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called powernow-k8.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
-	  If in doubt, say N.
-
-config X86_POWERNOW_K8_ACPI
-	bool
-	prompt "ACPI Support" if X86_32
-	depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
-	default y
-	help
-	  This provides access to the K8s Processor Performance States via ACPI.
-	  This driver is probably required for CPUFreq to work with multi-socket and
-	  SMP systems.  It is not required on at least some single-socket yet
-	  multi-core systems, even if SMP is enabled.
-
-	  It is safe to say Y here.
-
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
 	depends on X86_32 && PCI
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 4dd7e3bdee2..acc06b03194 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -38,11 +38,9 @@
 
 #include <asm/msr.h>
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 #include <linux/acpi.h>
 #include <linux/mutex.h>
 #include <acpi/processor.h>
-#endif
 
 #define PFX "powernow-k8: "
 #define VERSION "version 2.20.00"
@@ -800,7 +798,6 @@ static int find_psb_table(struct powernow_k8_data *data)
 	return -ENODEV;
 }
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
 		unsigned int index)
 {
@@ -1030,23 +1027,6 @@ static int get_transition_latency(struct powernow_k8_data *data)
 	return 1000 * max_latency;
 }
 
-#else
-static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
-{
-	return -ENODEV;
-}
-static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
-{
-	return;
-}
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
-		unsigned int index)
-{
-	return;
-}
-static int get_transition_latency(struct powernow_k8_data *data) { return 0; }
-#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
-
 /* Take a frequency, and issue the fid/vid transition command */
 static int transition_frequency_fidvid(struct powernow_k8_data *data,
 		unsigned int index)
@@ -1260,19 +1240,11 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-#ifndef CONFIG_ACPI_PROCESSOR
-			printk(KERN_ERR PFX
-				"ACPI Processor support is required for "
-				"SMP systems but is absent. Please load the "
-				"ACPI Processor module before starting this "
-				"driver.\n");
-#else
 			printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
 			       " ACPI _PSS objects in a way that Linux "
 			       "understands. Please report this to the Linux "
 			       "ACPI maintainers and complain to your BIOS "
 			       "vendor.\n");
-#endif
 			kfree(data);
 			return -ENODEV;
 		}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index 8ecc75b6c7c..6c6698feade 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -45,11 +45,10 @@ struct powernow_k8_data {
 	 * frequency is in kHz */
 	struct cpufreq_frequency_table  *powernow_table;
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 	/* the acpi table needs to be kept. it's only available if ACPI was
 	 * used to determine valid frequency/vid/fid states */
 	struct acpi_processor_performance acpi_data;
-#endif
+
 	/* we need to keep track of associated cores, but let cpufreq
 	 * handle hotplug events - so just point at cpufreq pol->cpus
 	 * structure */
@@ -222,10 +221,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
 static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
-#endif
 
 #ifdef CONFIG_SMP
 static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
-- 
cgit v1.2.3


From 79cc56af9fdbeaa91f50289b932d0959b41f9467 Mon Sep 17 00:00:00 2001
From: Thomas Renninger <trenn@suse.de>
Date: Wed, 4 Feb 2009 11:56:11 +0100
Subject: [CPUFREQ] powernow-k8: Only print error message once, not per core.

This is the typical message you get if you plug in a CPU
which is newer than your BIOS. It's annoying seeing this
message for each core.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index acc06b03194..c44853fc827 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -794,7 +794,7 @@ static int find_psb_table(struct powernow_k8_data *data)
 	 * BIOS and Kernel Developer's Guide, which is available on
 	 * www.amd.com
 	 */
-	printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n");
+	printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
 	return -ENODEV;
 }
 
@@ -1218,6 +1218,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
 	int rc;
+	static int print_once;
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1240,11 +1241,19 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-			printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
-			       " ACPI _PSS objects in a way that Linux "
-			       "understands. Please report this to the Linux "
-			       "ACPI maintainers and complain to your BIOS "
-			       "vendor.\n");
+			/*
+			 * Replace this one with print_once as soon as such a
+			 * thing gets introduced
+			 */
+			if (!print_once) {
+				WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
+					"does not provide ACPI _PSS objects "
+					"in a way that Linux understands. "
+					"Please report this to the Linux ACPI"
+					" maintainers and complain to your "
+					"BIOS vendor.\n");
+				print_once++;
+			}
 			kfree(data);
 			return -ENODEV;
 		}
-- 
cgit v1.2.3


From 3a58df35a64a1e0ac32c30ea629a513dec2fe711 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Sat, 17 Jan 2009 22:36:14 -0500
Subject: [CPUFREQ] checkpatch cleanups for acpi-cpufreq

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 36 +++++++++++++++---------------
 1 file changed, 18 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 4b1c319d30c..3babe1f1e91 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -1,5 +1,5 @@
 /*
- * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $)
+ * acpi-cpufreq.c - ACPI Processor P-States Driver
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -36,16 +36,18 @@
 #include <linux/ftrace.h>
 
 #include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
 #include <acpi/processor.h>
 
-#include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"acpi-cpufreq", msg)
 
 MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
 MODULE_DESCRIPTION("ACPI Processor P-States Driver");
@@ -95,7 +97,7 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
 
 	perf = data->acpi_data;
 
-	for (i=0; i<perf->state_count; i++) {
+	for (i = 0; i < perf->state_count; i++) {
 		if (value == perf->states[i].status)
 			return data->freq_table[i].frequency;
 	}
@@ -110,7 +112,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
 	msr &= INTEL_MSR_RANGE;
 	perf = data->acpi_data;
 
-	for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+	for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
 		if (msr == perf->states[data->freq_table[i].index].status)
 			return data->freq_table[i].frequency;
 	}
@@ -138,15 +140,13 @@ struct io_addr {
 	u8 bit_width;
 };
 
-typedef union {
-	struct msr_addr msr;
-	struct io_addr io;
-} drv_addr_union;
-
 struct drv_cmd {
 	unsigned int type;
 	const struct cpumask *mask;
-	drv_addr_union addr;
+	union {
+		struct msr_addr msr;
+		struct io_addr io;
+	} addr;
 	u32 val;
 };
 
@@ -369,7 +369,7 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
 	unsigned int cur_freq;
 	unsigned int i;
 
-	for (i=0; i<100; i++) {
+	for (i = 0; i < 100; i++) {
 		cur_freq = extract_freq(get_cur_val(mask), data);
 		if (cur_freq == freq)
 			return 1;
@@ -494,7 +494,7 @@ acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
 		unsigned long freq;
 		unsigned long freqn = perf->states[0].core_frequency * 1000;
 
-		for (i=0; i<(perf->state_count-1); i++) {
+		for (i = 0; i < (perf->state_count-1); i++) {
 			freq = freqn;
 			freqn = perf->states[i+1].core_frequency * 1000;
 			if ((2 * cpu_khz) > (freqn + freq)) {
@@ -673,7 +673,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	/* detect transition latency */
 	policy->cpuinfo.transition_latency = 0;
-	for (i=0; i<perf->state_count; i++) {
+	for (i = 0; i < perf->state_count; i++) {
 		if ((perf->states[i].transition_latency * 1000) >
 		    policy->cpuinfo.transition_latency)
 			policy->cpuinfo.transition_latency =
@@ -682,8 +682,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	data->max_freq = perf->states[0].core_frequency * 1000;
 	/* table init */
-	for (i=0; i<perf->state_count; i++) {
-		if (i>0 && perf->states[i].core_frequency >=
+	for (i = 0; i < perf->state_count; i++) {
+		if (i > 0 && perf->states[i].core_frequency >=
 		    data->freq_table[valid_states-1].frequency / 1000)
 			continue;
 
-- 
cgit v1.2.3


From 91420220d278584693d11a800b78fdc20e8fe10e Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Wed, 4 Feb 2009 15:28:54 -0500
Subject: [CPUFREQ] Use swap() in longhaul.c

Remove hand-coded implementation of swap()

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/longhaul.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index dc03622a83a..f1c51aea064 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -511,13 +511,10 @@ static int __init longhaul_get_ranges(void)
 			}
 		}
 		if (min_i != j) {
-			unsigned int temp;
-			temp = longhaul_table[j].frequency;
-			longhaul_table[j].frequency = longhaul_table[min_i].frequency;
-			longhaul_table[min_i].frequency = temp;
-			temp = longhaul_table[j].index;
-			longhaul_table[j].index = longhaul_table[min_i].index;
-			longhaul_table[min_i].index = temp;
+			swap(longhaul_table[j].frequency,
+			     longhaul_table[min_i].frequency);
+			swap(longhaul_table[j].index,
+			     longhaul_table[min_i].index);
 		}
 	}
 
-- 
cgit v1.2.3


From de3ed81d746d7cfc22a0c645244ed9fa71e4a833 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed, 18 Feb 2009 18:28:22 +0000
Subject: [CPUFREQ] Change link order of x86 cpufreq modules

Change the link order of the cpufreq modules to ensure that they're
probed in the preferred order when statically linked in.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/Makefile | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
index 560f7760dae..509296df294 100644
--- a/arch/x86/kernel/cpu/cpufreq/Makefile
+++ b/arch/x86/kernel/cpu/cpufreq/Makefile
@@ -1,6 +1,11 @@
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
 obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
-obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
 obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
@@ -10,7 +15,6 @@ obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
 obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
 obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
 obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
 obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
 obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
 obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
-- 
cgit v1.2.3


From 0cb8bc256093e716d2a0a4a721f36c625a3f7634 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Wed, 18 Feb 2009 14:11:00 -0500
Subject: [CPUFREQ] powernow-k8: Use a common exit path.

a0abd520fd69295f4a3735e29a9448a32e101d47 introduced a slew of
extra kfree/return -ENODEV pairs. This replaces them all
with gotos.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c44853fc827..a15ac94e0b9 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1254,21 +1254,18 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 					"BIOS vendor.\n");
 				print_once++;
 			}
-			kfree(data);
-			return -ENODEV;
+			goto err_out;
 		}
 		if (pol->cpu != 0) {
 			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
 			       "CPU other than CPU0. Complain to your BIOS "
 			       "vendor.\n");
-			kfree(data);
-			return -ENODEV;
+			goto err_out;
 		}
 		rc = find_psb_table(data);
-		if (rc) {
-			kfree(data);
-			return -ENODEV;
-		}
+		if (rc)
+			goto err_out;
+
 		/* Take a crude guess here.
 		 * That guess was in microseconds, so multiply with 1000 */
 		pol->cpuinfo.transition_latency = (
@@ -1283,16 +1280,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
-		goto err_out;
+		goto err_out_unmask;
 	}
 
 	if (pending_bit_stuck()) {
 		printk(KERN_ERR PFX "failing init, change pending bit set\n");
-		goto err_out;
+		goto err_out_unmask;
 	}
 
 	if (query_current_values_with_pending_wait(data))
-		goto err_out;
+		goto err_out_unmask;
 
 	if (cpu_family == CPU_OPTERON)
 		fidvid_msr_init();
@@ -1335,10 +1332,11 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	return 0;
 
-err_out:
+err_out_unmask:
 	set_cpus_allowed_ptr(current, &oldmask);
 	powernow_k8_cpu_exit_acpi(data);
 
+err_out:
 	kfree(data);
 	return -ENODEV;
 }
-- 
cgit v1.2.3


From 199785eac892a1fa1b71cc22bec58e8b156d9311 Mon Sep 17 00:00:00 2001
From: Matthias-Christian Ott <ott@mirix.org>
Date: Fri, 20 Feb 2009 20:52:17 -0500
Subject: [CPUFREQ] p4-clockmod reports wrong frequency.

http://bugzilla.kernel.org/show_bug.cgi?id=10968

[ Updated for current tree, and fixed compile failure
  when p4-clockmod was built modular -- davej]

From: Matthias-Christian Ott <ott@mirix.org>
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/include/asm/timer.h                |  2 +-
 arch/x86/kernel/cpu/cpufreq/p4-clockmod.c   |  7 ++++++
 arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 34 +++++++++++++++++------------
 arch/x86/kernel/tsc.c                       |  3 ---
 4 files changed, 28 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index 2bb6a835c45..4f5c2472485 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -11,8 +11,8 @@ unsigned long native_calibrate_tsc(void);
 
 #ifdef CONFIG_X86_32
 extern int timer_ack;
+#endif
 extern int recalibrate_cpu_khz(void);
-#endif /* CONFIG_X86_32 */
 
 extern int no_timer_check;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 46a2a7a5314..1778402305e 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -31,6 +31,7 @@
 
 #include <asm/processor.h>
 #include <asm/msr.h>
+#include <asm/timer.h>
 
 #include "speedstep-lib.h"
 
@@ -224,6 +225,12 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 		dprintk("has errata -- disabling low frequencies\n");
 	}
 
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
+	    c->x86_model < 2) {
+		/* switch to maximum frequency and measure result */
+		cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
+		recalibrate_cpu_khz();
+	}
 	/* get max frequency */
 	stock_freq = cpufreq_p4_get_frequency(c);
 	if (!stock_freq)
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
index 55c696daa05..2e3c6862657 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 
 #include <asm/msr.h>
+#include <asm/tsc.h>
 #include "speedstep-lib.h"
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
@@ -178,6 +179,15 @@ static unsigned int pentium4_get_frequency(void)
 	u32 msr_lo, msr_hi, mult;
 	unsigned int fsb = 0;
 	unsigned int ret;
+	u8 fsb_code;
+
+	/* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
+	 * to System Bus Frequency Ratio Field in the Processor Frequency
+	 * Configuration Register of the MSR. Therefore the current
+	 * frequency cannot be calculated and has to be measured.
+	 */
+	if (c->x86_model < 2)
+		return cpu_khz;
 
 	rdmsr(0x2c, msr_lo, msr_hi);
 
@@ -188,21 +198,17 @@ static unsigned int pentium4_get_frequency(void)
 	 * revision #12 in Table B-1: MSRs in the Pentium 4 and
 	 * Intel Xeon Processors, on page B-4 and B-5.
 	 */
-	if (c->x86_model < 2)
+	fsb_code = (msr_lo >> 16) & 0x7;
+	switch (fsb_code) {
+	case 0:
 		fsb = 100 * 1000;
-	else {
-		u8 fsb_code = (msr_lo >> 16) & 0x7;
-		switch (fsb_code) {
-		case 0:
-			fsb = 100 * 1000;
-			break;
-		case 1:
-			fsb = 13333 * 10;
-			break;
-		case 2:
-			fsb = 200 * 1000;
-			break;
-		}
+		break;
+	case 1:
+		fsb = 13333 * 10;
+		break;
+	case 2:
+		fsb = 200 * 1000;
+		break;
 	}
 
 	if (!fsb)
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 599e5816863..5ad22f8f5f3 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -523,8 +523,6 @@ unsigned long native_calibrate_tsc(void)
 	return tsc_pit_min;
 }
 
-#ifdef CONFIG_X86_32
-/* Only called from the Powernow K7 cpu freq driver */
 int recalibrate_cpu_khz(void)
 {
 #ifndef CONFIG_SMP
@@ -546,7 +544,6 @@ int recalibrate_cpu_khz(void)
 
 EXPORT_SYMBOL(recalibrate_cpu_khz);
 
-#endif /* CONFIG_X86_32 */
 
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
-- 
cgit v1.2.3


From eb3092cee79e4efa5d3e9c81c7e6ca90318cebb8 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Sat, 21 Feb 2009 01:58:47 +0000
Subject: [CPUFREQ] Make cpufreq-nforce2 less obnoxious

Not owning an nforce2 is a sign of good taste, not an error.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 99262906838..733093d6043 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -424,7 +424,7 @@ static int __init nforce2_init(void)
 
 	/* detect chipset */
 	if (nforce2_detect_chipset()) {
-		printk(KERN_ERR PFX "No nForce2 chipset.\n");
+		printk(KERN_INFO PFX "No nForce2 chipset.\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3


From f5273fa3102fa4c25819f3034b8834c37d3e62a3 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Mon, 23 Feb 2009 22:37:36 +0000
Subject: [ARM] orion5x: ts78xx make more bulletproof the RTC load/unload code

Added checks to the platform_device_(register|add) calls so that if
a device failed to load it would then not later be unloaded; also
added the hooks so that it would not try to unload when the RTC
driver support is compiled out.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
---
 arch/arm/mach-orion5x/ts78xx-setup.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index baa25d0fd5c..778b11860ee 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -117,6 +117,7 @@ static struct platform_device ts78xx_ts_rtc_device = {
  */
 static int ts78xx_ts_rtc_load(void)
 {
+	int rc;
 	unsigned char tmp_rtc0, tmp_rtc1;
 
 	tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
@@ -130,16 +131,18 @@ static int ts78xx_ts_rtc_load(void)
 				&& ts78xx_ts_rtc_readbyte(126) == 0x00) {
 			ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
 			ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
+
 			if (ts78xx_fpga.supports.ts_rtc.init == 0) {
-				ts78xx_fpga.supports.ts_rtc.init = 1;
-				platform_device_register(&ts78xx_ts_rtc_device);
+				rc = platform_device_register(&ts78xx_ts_rtc_device);
+				if (!rc)
+					ts78xx_fpga.supports.ts_rtc.init = 1;
 			} else
-				platform_device_add(&ts78xx_ts_rtc_device);
-			return 0;
+				rc = platform_device_add(&ts78xx_ts_rtc_device);
+
+			return rc;
 		}
 	}
 
-	ts78xx_fpga.supports.ts_rtc.present = 0;
 	return -ENODEV;
 };
 
@@ -150,7 +153,7 @@ static void ts78xx_ts_rtc_unload(void)
 #else
 static int ts78xx_ts_rtc_load(void)
 {
-	return 0;
+	return -ENODEV;
 }
 
 static void ts78xx_ts_rtc_unload(void)
@@ -184,8 +187,11 @@ static int ts78xx_fpga_load_devices(void)
 
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
-		if (tmp)
-			printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx RTC"
+					" not detected or enabled\n");
+			ts78xx_fpga.supports.ts_rtc.present = 0;
+		}
 		ret |= tmp;
 	}
 
-- 
cgit v1.2.3


From 673492a800b14a9aac5d9d1af120334b9578a23c Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Mon, 23 Feb 2009 22:38:50 +0000
Subject: [ARM] orion5x: ts78xx amend RTC registering to not depend on ifdef's

amend RTC registering to not depend on ifdef's

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
---
 arch/arm/mach-orion5x/ts78xx-setup.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 778b11860ee..640b44db5a3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -75,7 +75,6 @@ static struct mv_sata_platform_data ts78xx_sata_data = {
 /*****************************************************************************
  * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
  ****************************************************************************/
-#ifdef CONFIG_RTC_DRV_M48T86
 #define TS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
 #define TS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
 
@@ -150,16 +149,6 @@ static void ts78xx_ts_rtc_unload(void)
 {
 	platform_device_del(&ts78xx_ts_rtc_device);
 }
-#else
-static int ts78xx_ts_rtc_load(void)
-{
-	return -ENODEV;
-}
-
-static void ts78xx_ts_rtc_unload(void)
-{
-}
-#endif
 
 /*****************************************************************************
  * FPGA 'hotplug' support code
@@ -188,8 +177,7 @@ static int ts78xx_fpga_load_devices(void)
 	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
 		tmp = ts78xx_ts_rtc_load();
 		if (tmp) {
-			printk(KERN_INFO "TS-78xx RTC"
-					" not detected or enabled\n");
+			printk(KERN_INFO "TS-78xx: RTC not registered\n");
 			ts78xx_fpga.supports.ts_rtc.present = 0;
 		}
 		ret |= tmp;
-- 
cgit v1.2.3


From 75bb6b9aab3255f440ef4e72a31978d1681105d6 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Mon, 23 Feb 2009 22:40:01 +0000
Subject: [ARM] orion5x: ts78xx add NAND support via plat_nand

ts78xx add NAND support via plat_nand

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
---
 arch/arm/configs/orion5x_defconfig   |   2 +-
 arch/arm/mach-orion5x/ts78xx-fpga.h  |   1 +
 arch/arm/mach-orion5x/ts78xx-setup.c | 132 +++++++++++++++++++++++++++++++++++
 3 files changed, 134 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index a34ea6b2cc5..020e6a8a9e5 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -481,7 +481,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0b8e30faff1..e2c503c7807 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -17,6 +17,7 @@ struct fpga_device {
 struct fpga_devices {
 	/* Technologic Systems */
 	struct fpga_device 	ts_rtc;
+	struct fpga_device 	ts_nand;
 };
 
 struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 640b44db5a3..a6eec4e4942 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -15,6 +15,8 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/m48t86.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -150,12 +152,130 @@ static void ts78xx_ts_rtc_unload(void)
 	platform_device_del(&ts78xx_ts_rtc_device);
 }
 
+/*****************************************************************************
+ * NAND Flash
+ ****************************************************************************/
+#define TS_NAND_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x800)	/* VIRT */
+#define TS_NAND_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x804)	/* PHYS */
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 0
+ */
+static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+			unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		unsigned char bits;
+
+		bits = (ctrl & NAND_NCE) << 2;
+		bits |= ctrl & NAND_CLE;
+		bits |= (ctrl & NAND_ALE) >> 2;
+
+		writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
+{
+	return readb(TS_NAND_CTRL) & 0x20;
+}
+
+const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ts78xx_ts_nand_parts[] = {
+	{
+		.name		= "mbr",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	}, {
+		.name		= "initrd",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	}, {
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_nand_data ts78xx_ts_nand_data = {
+	.chip	= {
+		.part_probe_types	= ts_nand_part_probes,
+		.partitions		= ts78xx_ts_nand_parts,
+		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
+		.chip_delay		= 15,
+		.options		= NAND_USE_FLASH_BBT,
+	},
+	.ctrl	= {
+		/*
+		 * The HW ECC offloading functions, used to give about a 9%
+		 * performance increase for 'dd if=/dev/mtdblockX' and 5% for
+		 * nanddump.  This all however was changed by git commit
+		 * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
+		 * no performance advantage to be had so we no longer bother
+		 */
+		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
+		.dev_ready		= ts78xx_ts_nand_dev_ready,
+	},
+};
+
+static struct resource ts78xx_ts_nand_resources = {
+	.start		= TS_NAND_DATA,
+	.end		= TS_NAND_DATA + 4,
+	.flags		= IORESOURCE_IO,
+};
+
+static struct platform_device ts78xx_ts_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_nand_data,
+	},
+	.resource	= &ts78xx_ts_nand_resources,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_nand_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_nand.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_nand_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_nand.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_nand_device);
+
+	return rc;
+};
+
+static void ts78xx_ts_nand_unload(void)
+{
+	platform_device_del(&ts78xx_ts_nand_device);
+}
+
 /*****************************************************************************
  * FPGA 'hotplug' support code
  ****************************************************************************/
 static void ts78xx_fpga_devices_zero_init(void)
 {
 	ts78xx_fpga.supports.ts_rtc.init = 0;
+	ts78xx_fpga.supports.ts_nand.init = 0;
 }
 
 static void ts78xx_fpga_supports(void)
@@ -164,9 +284,11 @@ static void ts78xx_fpga_supports(void)
 	switch (ts78xx_fpga.id) {
 	case TS7800_REV_B:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
+		ts78xx_fpga.supports.ts_nand.present = 1;
 		break;
 	default:
 		ts78xx_fpga.supports.ts_rtc.present = 0;
+		ts78xx_fpga.supports.ts_nand.present = 0;
 	}
 }
 
@@ -182,6 +304,14 @@ static int ts78xx_fpga_load_devices(void)
 		}
 		ret |= tmp;
 	}
+	if (ts78xx_fpga.supports.ts_nand.present == 1) {
+		tmp = ts78xx_ts_nand_load();
+		if (tmp) {
+			printk(KERN_INFO "TS-78xx: NAND not registered\n");
+			ts78xx_fpga.supports.ts_nand.present = 0;
+		}
+		ret |= tmp;
+	}
 
 	return ret;
 }
@@ -192,6 +322,8 @@ static int ts78xx_fpga_unload_devices(void)
 
 	if (ts78xx_fpga.supports.ts_rtc.present == 1)
 		ts78xx_ts_rtc_unload();
+	if (ts78xx_fpga.supports.ts_nand.present == 1)
+		ts78xx_ts_nand_unload();
 
 	return ret;
 }
-- 
cgit v1.2.3


From 3255aa2eb636a508fc82a73fabbb8aaf2ff23c0f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 25 Feb 2009 08:21:52 +0100
Subject: x86, mm: pass in 'total' to __copy_from_user_*nocache()

Impact: cleanup, enable future change

Add a 'total bytes copied' parameter to __copy_from_user_*nocache(),
and update all the callsites.

The parameter is not used yet - architecture code can use it to
more intelligently decide whether the copy should be cached or
non-temporal.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess_32.h | 4 ++--
 arch/x86/include/asm/uaccess_64.h | 5 ++---
 2 files changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 5e06259e90e..a0ba6138697 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -157,7 +157,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 }
 
 static __always_inline unsigned long __copy_from_user_nocache(void *to,
-				const void __user *from, unsigned long n)
+		const void __user *from, unsigned long n, unsigned long total)
 {
 	might_fault();
 	if (__builtin_constant_p(n)) {
@@ -180,7 +180,7 @@ static __always_inline unsigned long __copy_from_user_nocache(void *to,
 
 static __always_inline unsigned long
 __copy_from_user_inatomic_nocache(void *to, const void __user *from,
-				  unsigned long n)
+				  unsigned long n, unsigned long total)
 {
        return __copy_from_user_ll_nocache_nozero(to, from, n);
 }
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 987a2c10fe2..a748253db0c 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -189,7 +189,7 @@ extern long __copy_user_nocache(void *dst, const void __user *src,
 				unsigned size, int zerorest);
 
 static inline int __copy_from_user_nocache(void *dst, const void __user *src,
-					   unsigned size)
+				   unsigned size, unsigned long total)
 {
 	might_sleep();
 	/*
@@ -205,8 +205,7 @@ static inline int __copy_from_user_nocache(void *dst, const void __user *src,
 }
 
 static inline int __copy_from_user_inatomic_nocache(void *dst,
-						    const void __user *src,
-						    unsigned size)
+	    const void __user *src, unsigned size, unsigned total)
 {
 	if (likely(size >= PAGE_SIZE))
 		return __copy_user_nocache(dst, src, size, 0);
-- 
cgit v1.2.3


From 95108fa34a83ffd97e0af959e4b28d7c62008781 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 25 Feb 2009 08:22:20 +0100
Subject: x86: usercopy: check for total size when deciding non-temporal cutoff

Impact: make more types of copies non-temporal

This change makes the following simple fix:

  30d697f: x86: fix performance regression in write() syscall

A bit more sophisticated: we check the 'total' number of bytes
written to decide whether to copy in a cached or a non-temporal
way.

This will for example cause the tail (modulo 4096 bytes) chunk
of a large write() to be non-temporal too - not just the page-sized
chunks.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess_64.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index a748253db0c..dcaa0404cf7 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -198,7 +198,7 @@ static inline int __copy_from_user_nocache(void *dst, const void __user *src,
 	 * non-temporal stores here. Smaller writes get handled
 	 * via regular __copy_from_user():
 	 */
-	if (likely(size >= PAGE_SIZE))
+	if (likely(total >= PAGE_SIZE))
 		return __copy_user_nocache(dst, src, size, 1);
 	else
 		return __copy_from_user(dst, src, size);
@@ -207,7 +207,7 @@ static inline int __copy_from_user_nocache(void *dst, const void __user *src,
 static inline int __copy_from_user_inatomic_nocache(void *dst,
 	    const void __user *src, unsigned size, unsigned total)
 {
-	if (likely(size >= PAGE_SIZE))
+	if (likely(total >= PAGE_SIZE))
 		return __copy_user_nocache(dst, src, size, 0);
 	else
 		return __copy_from_user_inatomic(dst, src, size);
-- 
cgit v1.2.3


From 40823f737e5bd186a1156fb1c28f360260e1e084 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 25 Feb 2009 11:26:18 +0100
Subject: x86: memtest: reuse test patterns when memtest parameter exceeds
 number of available patterns

Impact: fix unexpected behaviour when pattern number is out of range

Current implementation provides 4 patterns for memtest. The code doesn't
check whether the memtest parameter value exceeds the maximum pattern number.

Instead the memtest code pretends to test with non-existing patterns, e.g.
when booting with memtest=10 I've observed the following

  ...
  early_memtest: pattern num 10
  0000001000 - 0000006000 pattern 0
  ...
  0000001000 - 0000006000 pattern 1
  ...
  0000001000 - 0000006000 pattern 2
  ...
  0000001000 - 0000006000 pattern 3
  ...
  0000001000 - 0000006000 pattern 4
  ...
  0000001000 - 0000006000 pattern 5
  ...
  0000001000 - 0000006000 pattern 6
  ...
  0000001000 - 0000006000 pattern 7
  ...
  0000001000 - 0000006000 pattern 8
  ...
  0000001000 - 0000006000 pattern 9
  ...

But in fact Linux didn't test anything for patterns > 4 as the default
case in memtest() is to leave the function.

I suggest to use the memtest parameter as the number of tests to be
performed and to re-iterate over all existing patterns.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/memtest.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 9cab18b0b85..00b8bdc64c3 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -9,6 +9,8 @@
 
 #include <asm/e820.h>
 
+#define _MAX_MEM_PATTERNS 4
+
 static void __init memtest(unsigned long start_phys, unsigned long size,
 				 unsigned pattern)
 {
@@ -21,6 +23,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size,
 	unsigned long count;
 	unsigned long incr;
 
+	pattern = pattern % _MAX_MEM_PATTERNS;
+
 	switch (pattern) {
 	case 0:
 		val = 0UL;
@@ -110,8 +114,9 @@ void __init early_memtest(unsigned long start, unsigned long end)
 				t_size = end - t_start;
 
 			printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
-				(unsigned long long)t_start,
-				(unsigned long long)t_start + t_size, pattern);
+			       (unsigned long long)t_start,
+			       (unsigned long long)t_start + t_size,
+			       pattern % _MAX_MEM_PATTERNS);
 
 			memtest(t_start, t_size, pattern);
 
-- 
cgit v1.2.3


From 6d74171bf7315257d276aa35400c5a8d6a993f19 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 25 Feb 2009 11:27:27 +0100
Subject: x86: memtest: introduce array to select memtest patterns

Impact: code cleanup

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/memtest.c | 65 ++++++++++++++++++---------------------------------
 1 file changed, 23 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 00b8bdc64c3..827f94044cf 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -9,48 +9,25 @@
 
 #include <asm/e820.h>
 
-#define _MAX_MEM_PATTERNS 4
+static u64 patterns[] __initdata = {
+	0,
+	0xffffffffffffffffULL,
+	0x5555555555555555ULL,
+	0xaaaaaaaaaaaaaaaaULL,
+};
 
 static void __init memtest(unsigned long start_phys, unsigned long size,
-				 unsigned pattern)
+			   u64 pattern)
 {
 	unsigned long i;
-	unsigned long *start;
+	u64 *start;
 	unsigned long start_bad;
 	unsigned long last_bad;
-	unsigned long val;
 	unsigned long start_phys_aligned;
 	unsigned long count;
 	unsigned long incr;
 
-	pattern = pattern % _MAX_MEM_PATTERNS;
-
-	switch (pattern) {
-	case 0:
-		val = 0UL;
-		break;
-	case 1:
-		val = -1UL;
-		break;
-	case 2:
-#ifdef CONFIG_X86_64
-		val = 0x5555555555555555UL;
-#else
-		val = 0x55555555UL;
-#endif
-		break;
-	case 3:
-#ifdef CONFIG_X86_64
-		val = 0xaaaaaaaaaaaaaaaaUL;
-#else
-		val = 0xaaaaaaaaUL;
-#endif
-		break;
-	default:
-		return;
-	}
-
-	incr = sizeof(unsigned long);
+	incr = sizeof(pattern);
 	start_phys_aligned = ALIGN(start_phys, incr);
 	count = (size - (start_phys_aligned - start_phys))/incr;
 	start = __va(start_phys_aligned);
@@ -58,15 +35,16 @@ static void __init memtest(unsigned long start_phys, unsigned long size,
 	last_bad = 0;
 
 	for (i = 0; i < count; i++)
-		start[i] = val;
+		start[i] = pattern;
 	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-		if (*start != val) {
+		if (*start != pattern) {
 			if (start_phys_aligned == last_bad + incr) {
 				last_bad += incr;
 			} else {
 				if (start_bad) {
-					printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
-						val, start_bad, last_bad + incr);
+					printk(KERN_CONT "\n  %016llx bad mem addr %010lx - %010lx reserved",
+					       (unsigned long long) pattern,
+					       start_bad, last_bad + incr);
 					reserve_early(start_bad, last_bad + incr, "BAD RAM");
 				}
 				start_bad = last_bad = start_phys_aligned;
@@ -74,8 +52,9 @@ static void __init memtest(unsigned long start_phys, unsigned long size,
 		}
 	}
 	if (start_bad) {
-		printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
-			val, start_bad, last_bad + incr);
+		printk(KERN_CONT "\n  %016llx bad mem addr %010lx - %010lx reserved",
+		       (unsigned long long) pattern, start_bad,
+		       last_bad + incr);
 		reserve_early(start_bad, last_bad + incr, "BAD RAM");
 	}
 }
@@ -95,13 +74,16 @@ early_param("memtest", parse_memtest);
 void __init early_memtest(unsigned long start, unsigned long end)
 {
 	u64 t_start, t_size;
-	unsigned pattern;
+	unsigned int i;
+	u64 pattern;
 
 	if (!memtest_pattern)
 		return;
 
 	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
-	for (pattern = 0; pattern < memtest_pattern; pattern++) {
+	for (i = 0; i < memtest_pattern; i++) {
+		unsigned int idx = i % ARRAY_SIZE(patterns);
+		pattern = patterns[idx];
 		t_start = start;
 		t_size = 0;
 		while (t_start < end) {
@@ -115,8 +97,7 @@ void __init early_memtest(unsigned long start, unsigned long end)
 
 			printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
 			       (unsigned long long)t_start,
-			       (unsigned long long)t_start + t_size,
-			       pattern % _MAX_MEM_PATTERNS);
+			       (unsigned long long)t_start + t_size, idx);
 
 			memtest(t_start, t_size, pattern);
 
-- 
cgit v1.2.3


From 7dad169e57eda1f0aa6dc5ac43a898b4b0ced2c7 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 25 Feb 2009 11:28:07 +0100
Subject: x86: memtest: cleanup memtest function

Impact: code cleanup

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/memtest.c | 37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 827f94044cf..01a72d6825b 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -16,6 +16,15 @@ static u64 patterns[] __initdata = {
 	0xaaaaaaaaaaaaaaaaULL,
 };
 
+static void __init reserve_bad_mem(u64 pattern, unsigned long start_bad,
+			    unsigned long end_bad)
+{
+	printk(KERN_CONT "\n  %016llx bad mem addr "
+	       "%010lx - %010lx reserved",
+	       (unsigned long long) pattern, start_bad, end_bad);
+	reserve_early(start_bad, end_bad, "BAD RAM");
+}
+
 static void __init memtest(unsigned long start_phys, unsigned long size,
 			   u64 pattern)
 {
@@ -37,26 +46,18 @@ static void __init memtest(unsigned long start_phys, unsigned long size,
 	for (i = 0; i < count; i++)
 		start[i] = pattern;
 	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-		if (*start != pattern) {
-			if (start_phys_aligned == last_bad + incr) {
-				last_bad += incr;
-			} else {
-				if (start_bad) {
-					printk(KERN_CONT "\n  %016llx bad mem addr %010lx - %010lx reserved",
-					       (unsigned long long) pattern,
-					       start_bad, last_bad + incr);
-					reserve_early(start_bad, last_bad + incr, "BAD RAM");
-				}
-				start_bad = last_bad = start_phys_aligned;
-			}
+		if (*start == pattern)
+			continue;
+		if (start_phys_aligned == last_bad + incr) {
+			last_bad += incr;
+			continue;
 		}
+		if (start_bad)
+			reserve_bad_mem(pattern, start_bad, last_bad + incr);
+		start_bad = last_bad = start_phys_aligned;
 	}
-	if (start_bad) {
-		printk(KERN_CONT "\n  %016llx bad mem addr %010lx - %010lx reserved",
-		       (unsigned long long) pattern, start_bad,
-		       last_bad + incr);
-		reserve_early(start_bad, last_bad + incr, "BAD RAM");
-	}
+	if (start_bad)
+		reserve_bad_mem(pattern, start_bad, last_bad + incr);
 }
 
 /* default is disabled */
-- 
cgit v1.2.3


From 570c9e69aaa84689fb8ed2a3a4af39ca54ba7a47 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 25 Feb 2009 11:28:58 +0100
Subject: x86: memtest: adapt log messages

- print test pattern instead of pattern number,
- show pattern as stored in memory,
- use proper priority flags,
- consistent use of u64 throughout the code

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/memtest.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 01a72d6825b..3232397783a 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -16,25 +16,22 @@ static u64 patterns[] __initdata = {
 	0xaaaaaaaaaaaaaaaaULL,
 };
 
-static void __init reserve_bad_mem(u64 pattern, unsigned long start_bad,
-			    unsigned long end_bad)
+static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad)
 {
-	printk(KERN_CONT "\n  %016llx bad mem addr "
-	       "%010lx - %010lx reserved",
-	       (unsigned long long) pattern, start_bad, end_bad);
+	printk(KERN_INFO "  %016llx bad mem addr %010llx - %010llx reserved\n",
+	       (unsigned long long) pattern,
+	       (unsigned long long) start_bad,
+	       (unsigned long long) end_bad);
 	reserve_early(start_bad, end_bad, "BAD RAM");
 }
 
-static void __init memtest(unsigned long start_phys, unsigned long size,
-			   u64 pattern)
+static void __init memtest(u64 pattern, u64 start_phys, u64 size)
 {
-	unsigned long i;
+	u64 i, count;
 	u64 *start;
-	unsigned long start_bad;
-	unsigned long last_bad;
-	unsigned long start_phys_aligned;
-	unsigned long count;
-	unsigned long incr;
+	u64 start_bad, last_bad;
+	u64 start_phys_aligned;
+	size_t incr;
 
 	incr = sizeof(pattern);
 	start_phys_aligned = ALIGN(start_phys, incr);
@@ -81,7 +78,7 @@ void __init early_memtest(unsigned long start, unsigned long end)
 	if (!memtest_pattern)
 		return;
 
-	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+	printk(KERN_INFO "early_memtest: # of tests: %d\n", memtest_pattern);
 	for (i = 0; i < memtest_pattern; i++) {
 		unsigned int idx = i % ARRAY_SIZE(patterns);
 		pattern = patterns[idx];
@@ -96,14 +93,13 @@ void __init early_memtest(unsigned long start, unsigned long end)
 			if (t_start + t_size > end)
 				t_size = end - t_start;
 
-			printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
-			       (unsigned long long)t_start,
-			       (unsigned long long)t_start + t_size, idx);
-
-			memtest(t_start, t_size, pattern);
+			printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
+			       (unsigned long long) t_start,
+			       (unsigned long long) t_start + t_size,
+			       (unsigned long long) cpu_to_be64(pattern));
+			memtest(pattern, t_start, t_size);
 
 			t_start += t_size;
 		}
 	}
-	printk(KERN_CONT "\n");
 }
-- 
cgit v1.2.3


From bfb4dc0da45f8fddc76eba7e62919420c7d6dae2 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 25 Feb 2009 11:30:04 +0100
Subject: x86: memtest: wipe out test pattern from memory

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/memtest.c | 56 ++++++++++++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 3232397783a..9c52ef19e6f 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -57,6 +57,29 @@ static void __init memtest(u64 pattern, u64 start_phys, u64 size)
 		reserve_bad_mem(pattern, start_bad, last_bad + incr);
 }
 
+static void __init do_one_pass(u64 pattern, u64 start, u64 end)
+{
+	u64 size = 0;
+
+	while (start < end) {
+		start = find_e820_area_size(start, &size, 1);
+
+		/* done ? */
+		if (start >= end)
+			break;
+		if (start + size > end)
+			size = end - start;
+
+		printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
+		       (unsigned long long) start,
+		       (unsigned long long) start + size,
+		       (unsigned long long) cpu_to_be64(pattern));
+		memtest(pattern, start, size);
+
+		start += size;
+	}
+}
+
 /* default is disabled */
 static int memtest_pattern __initdata;
 
@@ -71,35 +94,22 @@ early_param("memtest", parse_memtest);
 
 void __init early_memtest(unsigned long start, unsigned long end)
 {
-	u64 t_start, t_size;
 	unsigned int i;
-	u64 pattern;
+	unsigned int idx = 0;
 
 	if (!memtest_pattern)
 		return;
 
 	printk(KERN_INFO "early_memtest: # of tests: %d\n", memtest_pattern);
 	for (i = 0; i < memtest_pattern; i++) {
-		unsigned int idx = i % ARRAY_SIZE(patterns);
-		pattern = patterns[idx];
-		t_start = start;
-		t_size = 0;
-		while (t_start < end) {
-			t_start = find_e820_area_size(t_start, &t_size, 1);
-
-			/* done ? */
-			if (t_start >= end)
-				break;
-			if (t_start + t_size > end)
-				t_size = end - t_start;
-
-			printk(KERN_INFO "  %010llx - %010llx pattern %016llx\n",
-			       (unsigned long long) t_start,
-			       (unsigned long long) t_start + t_size,
-			       (unsigned long long) cpu_to_be64(pattern));
-			memtest(pattern, t_start, t_size);
-
-			t_start += t_size;
-		}
+		idx = i % ARRAY_SIZE(patterns);
+		do_one_pass(patterns[idx], start, end);
+	}
+
+	if (idx > 0) {
+		printk(KERN_INFO "early_memtest: wipe out "
+		       "test pattern from memory\n");
+		/* additional test with pattern 0 will do this */
+		do_one_pass(0, start, end);
 	}
 }
-- 
cgit v1.2.3


From 63823126c221dd721ce7351b596b3b73aa943613 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 25 Feb 2009 11:31:49 +0100
Subject: x86: memtest: add additional (regular) test patterns

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/memtest.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
index 9c52ef19e6f..0bcd7883d03 100644
--- a/arch/x86/mm/memtest.c
+++ b/arch/x86/mm/memtest.c
@@ -14,6 +14,19 @@ static u64 patterns[] __initdata = {
 	0xffffffffffffffffULL,
 	0x5555555555555555ULL,
 	0xaaaaaaaaaaaaaaaaULL,
+	0x1111111111111111ULL,
+	0x2222222222222222ULL,
+	0x4444444444444444ULL,
+	0x8888888888888888ULL,
+	0x3333333333333333ULL,
+	0x6666666666666666ULL,
+	0x9999999999999999ULL,
+	0xccccccccccccccccULL,
+	0x7777777777777777ULL,
+	0xbbbbbbbbbbbbbbbbULL,
+	0xddddddddddddddddULL,
+	0xeeeeeeeeeeeeeeeeULL,
+	0x7a6c7258554e494cULL, /* yeah ;-) */
 };
 
 static void __init reserve_bad_mem(u64 pattern, u64 start_bad, u64 end_bad)
-- 
cgit v1.2.3


From 7880f7464546842ee14179bef16a6e14381ea638 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Tue, 24 Feb 2009 17:35:13 -0800
Subject: gpu/drm, x86, PAT: routine to keep identity map in sync

Add a function to check and keep identity maps in sync, when changing
any memory type. One of the follow on patches will also use this
routine.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pat.h |  3 +++
 arch/x86/mm/pat.c          | 46 +++++++++++++++++++++++++++++-----------------
 2 files changed, 32 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index b8493b3b989..abb3c29fc9d 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -19,4 +19,7 @@ extern int free_memtype(u64 start, u64 end);
 
 extern void pat_disable(char *reason);
 
+extern int kernel_map_sync_memtype(u64 base, unsigned long size,
+		unsigned long flag);
+
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index aebbf67a79d..399383c6f61 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -624,6 +624,33 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 	free_memtype(addr, addr + size);
 }
 
+/*
+ * Change the memory type for the physial address range in kernel identity
+ * mapping space if that range is a part of identity map.
+ */
+int kernel_map_sync_memtype(u64 base, unsigned long size, unsigned long flags)
+{
+	unsigned long id_sz;
+
+	if (!pat_enabled || base >= __pa(high_memory))
+		return 0;
+
+	id_sz = (__pa(high_memory) < base + size) ?
+				__pa(high_memory) - base :
+				size;
+
+	if (ioremap_change_attr((unsigned long)__va(base), id_sz, flags) < 0) {
+		printk(KERN_INFO
+			"%s:%d ioremap_change_attr failed %s "
+			"for %Lx-%Lx\n",
+			current->comm, current->pid,
+			cattr_name(flags),
+			base, (unsigned long long)(base + size));
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /*
  * Internal interface to reserve a range of physical memory with prot.
  * Reserved non RAM regions only and after successful reserve_memtype,
@@ -633,7 +660,7 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 				int strict_prot)
 {
 	int is_ram = 0;
-	int id_sz, ret;
+	int ret;
 	unsigned long flags;
 	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
 
@@ -670,23 +697,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 				     flags);
 	}
 
-	/* Need to keep identity mapping in sync */
-	if (paddr >= __pa(high_memory))
-		return 0;
-
-	id_sz = (__pa(high_memory) < paddr + size) ?
-				__pa(high_memory) - paddr :
-				size;
-
-	if (ioremap_change_attr((unsigned long)__va(paddr), id_sz, flags) < 0) {
+	if (kernel_map_sync_memtype(paddr, size, flags) < 0) {
 		free_memtype(paddr, paddr + size);
-		printk(KERN_ERR
-			"%s:%d reserve_pfn_range ioremap_change_attr failed %s "
-			"for %Lx-%Lx\n",
-			current->comm, current->pid,
-			cattr_name(flags),
-			(unsigned long long)paddr,
-			(unsigned long long)(paddr + size));
 		return -EINVAL;
 	}
 	return 0;
-- 
cgit v1.2.3


From 17581ad812a9abb0182260374ef2e52d4a808a64 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Tue, 24 Feb 2009 17:35:14 -0800
Subject: gpu/drm, x86, PAT: PAT support for io_mapping_*

Make io_mapping_create_wc and io_mapping_free go through PAT to make sure
that there are no memory type aliases.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/iomap.h |  5 ++++-
 arch/x86/mm/iomap_32.c       | 42 ++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 44 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index 86af26091d6..bd46495ff7d 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -24,7 +24,10 @@
 #include <asm/tlbflush.h>
 
 int
-is_io_mapping_possible(resource_size_t base, unsigned long size);
+reserve_io_memtype_wc(u64 base, unsigned long size, pgprot_t *prot);
+
+void
+free_io_memtype(u64 base, unsigned long size);
 
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index 6c2b1af1692..94596f794b1 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -21,13 +21,13 @@
 #include <linux/module.h>
 
 #ifdef CONFIG_X86_PAE
-int
+static int
 is_io_mapping_possible(resource_size_t base, unsigned long size)
 {
 	return 1;
 }
 #else
-int
+static int
 is_io_mapping_possible(resource_size_t base, unsigned long size)
 {
 	/* There is no way to map greater than 1 << 32 address without PAE */
@@ -38,6 +38,44 @@ is_io_mapping_possible(resource_size_t base, unsigned long size)
 }
 #endif
 
+int
+reserve_io_memtype_wc(u64 base, unsigned long size, pgprot_t *prot)
+{
+	unsigned long ret_flag;
+
+	if (!is_io_mapping_possible(base, size))
+		goto out_err;
+
+	if (!pat_enabled) {
+		*prot = pgprot_noncached(PAGE_KERNEL);
+		return 0;
+	}
+
+	if (reserve_memtype(base, base + size, _PAGE_CACHE_WC, &ret_flag))
+		goto out_err;
+
+	if (ret_flag == _PAGE_CACHE_WB)
+		goto out_free;
+
+	if (kernel_map_sync_memtype(base, size, ret_flag))
+		goto out_free;
+
+	*prot = __pgprot(__PAGE_KERNEL | ret_flag);
+	return 0;
+
+out_free:
+	free_memtype(base, base + size);
+out_err:
+	return -EINVAL;
+}
+
+void
+free_io_memtype(u64 base, unsigned long size)
+{
+	if (pat_enabled)
+		free_memtype(base, base + size);
+}
+
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
  */
 void *
-- 
cgit v1.2.3


From 34754b69a6f87aa6aa2860525a82f12532f83afd Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 25 Feb 2009 16:04:03 +0100
Subject: x86: make vmap yell louder when it is used under irqs_disabled()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/alternative.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index a84ac7b570e..6907b8e85d5 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -498,12 +498,12 @@ void *text_poke_early(void *addr, const void *opcode, size_t len)
  */
 void *__kprobes text_poke(void *addr, const void *opcode, size_t len)
 {
-	unsigned long flags;
 	char *vaddr;
 	int nr_pages = 2;
 	struct page *pages[2];
 	int i;
 
+	might_sleep();
 	if (!core_kernel_text((unsigned long)addr)) {
 		pages[0] = vmalloc_to_page(addr);
 		pages[1] = vmalloc_to_page(addr + PAGE_SIZE);
@@ -517,9 +517,9 @@ void *__kprobes text_poke(void *addr, const void *opcode, size_t len)
 		nr_pages = 1;
 	vaddr = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL);
 	BUG_ON(!vaddr);
-	local_irq_save(flags);
+	local_irq_disable();
 	memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len);
-	local_irq_restore(flags);
+	local_irq_enable();
 	vunmap(vaddr);
 	sync_core();
 	/* Could also do a CLFLUSH here to speed up CPU recovery; but
-- 
cgit v1.2.3


From 13093cb0e59053bf97910de3a24f07cdff71c62c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 26 Feb 2009 03:16:47 +0100
Subject: gpu/drm, x86, PAT: PAT support for io_mapping_*, export symbols for
 modules

Impact: build fix

 ERROR: "reserve_io_memtype_wc" [drivers/gpu/drm/i915/i915.ko] undefined!
 ERROR: "free_io_memtype" [drivers/gpu/drm/i915/i915.ko] undefined!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/iomap_32.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index 94596f794b1..d5e28424622 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -68,6 +68,7 @@ out_free:
 out_err:
 	return -EINVAL;
 }
+EXPORT_SYMBOL_GPL(reserve_io_memtype_wc);
 
 void
 free_io_memtype(u64 base, unsigned long size)
@@ -75,6 +76,7 @@ free_io_memtype(u64 base, unsigned long size)
 	if (pat_enabled)
 		free_memtype(base, base + size);
 }
+EXPORT_SYMBOL_GPL(free_io_memtype);
 
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
  */
-- 
cgit v1.2.3


From 2b6163bf5772644068694583816fa41e8474239f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 25 Feb 2009 20:50:49 -0800
Subject: x86: remove update_apic from x86_quirks

Impact: cleanup

x86_quirks->update_apic() calling looks crazy. so try to remove it:

 1. every apic take wakeup_cpu member directly
 2. separate es7000_apic to es7000_apic_cluster
 3. use uv_wakeup_cpu directly

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h           |   7 +-
 arch/x86/include/asm/setup.h          |   3 -
 arch/x86/include/asm/uv/uv.h          |   3 -
 arch/x86/kernel/apic/apic_flat_64.c   |   4 +-
 arch/x86/kernel/apic/bigsmp_32.c      |   2 +-
 arch/x86/kernel/apic/es7000_32.c      | 127 ++++++++++++++++++++++++++--------
 arch/x86/kernel/apic/numaq_32.c       |  10 +--
 arch/x86/kernel/apic/probe_32.c       |  16 +----
 arch/x86/kernel/apic/probe_64.c       |   3 -
 arch/x86/kernel/apic/summit_32.c      |   2 +-
 arch/x86/kernel/apic/x2apic_cluster.c |   2 +-
 arch/x86/kernel/apic/x2apic_phys.c    |   2 +-
 arch/x86/kernel/apic/x2apic_uv_x.c    |  11 +--
 arch/x86/kernel/setup.c               |  14 +---
 arch/x86/kernel/smpboot.c             |   8 +--
 15 files changed, 121 insertions(+), 93 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index a6208dc7463..860504178e9 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -325,6 +325,9 @@ struct apic {
 };
 
 extern struct apic *apic;
+extern atomic_t init_deasserted;
+extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
+extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
 
 static inline u32 apic_read(u32 reg)
 {
@@ -384,9 +387,7 @@ static inline unsigned default_get_apic_id(unsigned long x)
 #define DEFAULT_TRAMPOLINE_PHYS_LOW		0x467
 #define DEFAULT_TRAMPOLINE_PHYS_HIGH		0x469
 
-#ifdef CONFIG_X86_32
-extern void es7000_update_apic_to_cluster(void);
-#else
+#ifdef CONFIG_X86_64
 extern struct apic apic_flat;
 extern struct apic apic_physflat;
 extern struct apic apic_x2apic_cluster;
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 66801cb72f6..126877e502e 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -31,7 +31,6 @@ struct x86_quirks {
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
 				unsigned short oemsize);
 	int (*setup_ioapic_ids)(void);
-	int (*update_apic)(void);
 };
 
 extern void x86_quirk_pre_intr_init(void);
@@ -77,8 +76,6 @@ static inline void visws_early_detect(void) { }
 static inline int is_visws_box(void) { return 0; }
 #endif
 
-extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
-extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
 extern struct x86_quirks *x86_quirks;
 extern unsigned long saved_video_mode;
 
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 8242bf96581..c0a01b5d985 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -12,7 +12,6 @@ extern enum uv_system_type get_uv_system_type(void);
 extern int is_uv_system(void);
 extern void uv_cpu_init(void);
 extern void uv_system_init(void);
-extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
 						 unsigned long va,
@@ -24,8 +23,6 @@ static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
 static inline int is_uv_system(void)	{ return 0; }
 static inline void uv_cpu_init(void)	{ }
 static inline void uv_system_init(void)	{ }
-static inline int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
-{ return 1; }
 static inline const struct cpumask *
 uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm,
 		    unsigned long va, unsigned int cpu)
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 3b002995e14..00595bc2da8 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -222,7 +222,7 @@ struct apic apic_flat =  {
 	.send_IPI_all			= flat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
@@ -373,7 +373,7 @@ struct apic apic_physflat =  {
 	.send_IPI_all			= physflat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 0b1093394fd..8c25917b51a 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -256,7 +256,7 @@ struct apic apic_bigsmp = {
 	.send_IPI_all			= bigsmp_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 320f2d2e4e5..9f6102fc87a 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -163,17 +163,12 @@ static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 	return 0;
 }
 
-static int __init es7000_update_apic(void)
+static int __init es7000_apic_is_cluster(void)
 {
-	apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
-
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
-	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) {
-		es7000_update_apic_to_cluster();
-		apic->wait_for_init_deassert = NULL;
-		apic->wakeup_cpu = wakeup_secondary_cpu_via_mip;
-	}
+	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11))
+		return 1;
 
 	return 0;
 }
@@ -192,8 +187,6 @@ static void __init setup_unisys(void)
 	else
 		es7000_plat = ES7000_CLASSIC;
 	ioapic_renumber_irq = es7000_rename_gsi;
-
-	x86_quirks->update_apic = es7000_update_apic;
 }
 
 /*
@@ -310,6 +303,8 @@ static int es7000_check_dsdt(void)
 	return 0;
 }
 
+static int __initdata es7000_acpi_ret;
+
 /* Hook from generic ACPI tables.c */
 static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -332,8 +327,19 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		 */
 		unmap_unisys_acpi_oem_table(oem_addr);
 	}
-	return ret;
+
+	es7000_acpi_ret = ret;
+
+	return ret && !es7000_apic_is_cluster();
 }
+static int __init es7000_acpi_madt_oem_check_cluster(char *oem_id,
+						     char *oem_table_id)
+{
+	int ret = es7000_acpi_ret;
+
+	return ret && es7000_apic_is_cluster();
+}
+
 #else /* !CONFIG_ACPI: */
 static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
@@ -416,11 +422,8 @@ static void es7000_vector_allocation_domain(int cpu, cpumask_t *retmask)
 
 static void es7000_wait_for_init_deassert(atomic_t *deassert)
 {
-#ifndef CONFIG_ES7000_CLUSTERED_APIC
 	while (!atomic_read(deassert))
 		cpu_relax();
-#endif
-	return;
 }
 
 static unsigned int es7000_get_apic_id(unsigned long x)
@@ -659,37 +662,103 @@ static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-void __init es7000_update_apic_to_cluster(void)
-{
-	apic->target_cpus = target_cpus_cluster;
-	apic->irq_delivery_mode = dest_LowestPrio;
-	/* logical delivery broadcast to all procs: */
-	apic->irq_dest_mode = 1;
-
-	apic->init_apic_ldr = es7000_init_apic_ldr_cluster;
-
-	apic->cpu_mask_to_apicid = es7000_cpu_mask_to_apicid_cluster;
-}
-
 static int probe_es7000(void)
 {
 	/* probed later in mptable/ACPI hooks */
 	return 0;
 }
 
+static int __initdata es7000_mps_ret;
 static __init int
 es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
+	int ret = 0;
+
 	if (mpc->oemptr) {
 		struct mpc_oemtable *oem_table =
 			(struct mpc_oemtable *)mpc->oemptr;
 
 		if (!strncmp(oem, "UNISYS", 6))
-			return parse_unisys_oem((char *)oem_table);
+			ret = parse_unisys_oem((char *)oem_table);
 	}
-	return 0;
+
+	es7000_mps_ret = ret;
+
+	return ret && !es7000_apic_is_cluster();
+}
+
+static __init int
+es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem, char *productid)
+{
+	int ret = es7000_mps_ret;
+
+	return ret && es7000_apic_is_cluster();
 }
 
+struct apic apic_es7000_cluster = {
+
+	.name				= "es7000",
+	.probe				= probe_es7000,
+	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check_cluster,
+	.apic_id_registered		= es7000_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all procs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= target_cpus_cluster,
+	.disable_esr			= 1,
+	.dest_logical			= 0,
+	.check_apicid_used		= es7000_check_apicid_used,
+	.check_apicid_present		= es7000_check_apicid_present,
+
+	.vector_allocation_domain	= es7000_vector_allocation_domain,
+	.init_apic_ldr			= es7000_init_apic_ldr_cluster,
+
+	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
+	.setup_apic_routing		= es7000_setup_apic_routing,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= es7000_apicid_to_node,
+	.cpu_to_logical_apicid		= es7000_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
+	.enable_apic_mode		= es7000_enable_apic_mode,
+	.phys_pkg_id			= es7000_phys_pkg_id,
+	.mps_oem_check			= es7000_mps_oem_check_cluster,
+
+	.get_apic_id			= es7000_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0xFF << 24,
+
+	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid_cluster,
+	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= es7000_send_IPI_mask,
+	.send_IPI_mask_allbutself	= NULL,
+	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
+	.send_IPI_all			= es7000_send_IPI_all,
+	.send_IPI_self			= default_send_IPI_self,
+
+	.wakeup_cpu			= wakeup_secondary_cpu_via_mip,
+
+	.trampoline_phys_low		= 0x467,
+	.trampoline_phys_high		= 0x469,
+
+	.wait_for_init_deassert		= NULL,
+
+	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= default_inquire_remote_apic,
+
+	.read				= native_apic_mem_read,
+	.write				= native_apic_mem_write,
+	.icr_read			= native_apic_icr_read,
+	.icr_write			= native_apic_icr_write,
+	.wait_icr_idle			= native_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+};
 
 struct apic apic_es7000 = {
 
@@ -737,7 +806,7 @@ struct apic apic_es7000 = {
 	.send_IPI_all			= es7000_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 
 	.trampoline_phys_low		= 0x467,
 	.trampoline_phys_high		= 0x469,
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index d9d6d61eed8..c503c1799d6 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -256,13 +256,6 @@ static int __init numaq_setup_ioapic_ids(void)
 	return 1;
 }
 
-static int __init numaq_update_apic(void)
-{
-	apic->wakeup_cpu = wakeup_secondary_cpu_via_nmi;
-
-	return 0;
-}
-
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
@@ -278,7 +271,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
 	.smp_read_mpc_oem		= smp_read_mpc_oem,
 	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
-	.update_apic			= numaq_update_apic,
 };
 
 static __init void early_check_numaq(void)
@@ -546,7 +538,7 @@ struct apic apic_numaq = {
 	.send_IPI_all			= numaq_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_nmi,
 	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 3a730fa574b..13c6fc7dff9 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -138,7 +138,7 @@ struct apic apic_default = {
 	.send_IPI_all			= default_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
@@ -159,6 +159,7 @@ extern struct apic apic_numaq;
 extern struct apic apic_summit;
 extern struct apic apic_bigsmp;
 extern struct apic apic_es7000;
+extern struct apic apic_es7000_cluster;
 extern struct apic apic_default;
 
 struct apic *apic = &apic_default;
@@ -176,6 +177,7 @@ static struct apic *apic_probe[] __initdata = {
 #endif
 #ifdef CONFIG_X86_ES7000
 	&apic_es7000,
+	&apic_es7000_cluster,
 #endif
 	&apic_default,	/* must be last */
 	NULL,
@@ -197,9 +199,6 @@ static int __init parse_apic(char *arg)
 		}
 	}
 
-	if (x86_quirks->update_apic)
-		x86_quirks->update_apic();
-
 	/* Parsed again by __setup for debug/verbose */
 	return 0;
 }
@@ -218,8 +217,6 @@ void __init generic_bigsmp_probe(void)
 	if (!cmdline_apic && apic == &apic_default) {
 		if (apic_bigsmp.probe()) {
 			apic = &apic_bigsmp;
-			if (x86_quirks->update_apic)
-				x86_quirks->update_apic();
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       apic->name);
 		}
@@ -240,9 +237,6 @@ void __init generic_apic_probe(void)
 		/* Not visible without early console */
 		if (!apic_probe[i])
 			panic("Didn't find an APIC driver");
-
-		if (x86_quirks->update_apic)
-			x86_quirks->update_apic();
 	}
 	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
 }
@@ -262,8 +256,6 @@ generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 
 		if (!cmdline_apic) {
 			apic = apic_probe[i];
-			if (x86_quirks->update_apic)
-				x86_quirks->update_apic();
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
@@ -284,8 +276,6 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 
 		if (!cmdline_apic) {
 			apic = apic_probe[i];
-			if (x86_quirks->update_apic)
-				x86_quirks->update_apic();
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index e7c163661c7..8d7748efe6a 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -68,9 +68,6 @@ void __init default_setup_apic_routing(void)
 			apic = &apic_physflat;
 		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
-
-	if (x86_quirks->update_apic)
-		x86_quirks->update_apic();
 }
 
 /* Same for both flat and physical. */
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 32838b57a94..5a75d563f67 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -574,7 +574,7 @@ struct apic apic_summit = {
 	.send_IPI_all			= summit_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 354b9c45601..561a6b1042a 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -224,7 +224,7 @@ struct apic apic_x2apic_cluster = {
 	.send_IPI_all			= x2apic_send_IPI_all,
 	.send_IPI_self			= x2apic_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 5bcb174409b..785f8ee4b1d 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -213,7 +213,7 @@ struct apic apic_x2apic_phys = {
 	.send_IPI_all			= x2apic_send_IPI_all,
 	.send_IPI_self			= x2apic_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 20b4ad07c3a..6d7b9d960dd 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -91,7 +91,7 @@ static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
 	cpumask_set_cpu(cpu, retmask);
 }
 
-int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
+static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
 {
 	unsigned long val;
 	int pnode;
@@ -99,16 +99,19 @@ int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
 	pnode = uv_apicid_to_pnode(phys_apicid);
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
 	    APIC_DM_INIT;
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 	mdelay(10);
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
 	    APIC_DM_STARTUP;
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
+
+	atomic_set(&init_deasserted, 1);
+
 	return 0;
 }
 
@@ -285,7 +288,7 @@ struct apic apic_x2apic_uv_x = {
 	.send_IPI_all			= uv_send_IPI_all,
 	.send_IPI_self			= uv_send_IPI_self,
 
-	.wakeup_cpu			= NULL,
+	.wakeup_cpu			= uv_wakeup_secondary,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 5b85759e797..2280d93c5b9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -600,19 +600,7 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
-static int __init default_update_apic(void)
-{
-#ifdef CONFIG_SMP
-	if (!apic->wakeup_cpu)
-		apic->wakeup_cpu = wakeup_secondary_cpu_via_init;
-#endif
-
-	return 0;
-}
-
-static struct x86_quirks default_x86_quirks __initdata = {
-	.update_apic         = default_update_apic,
-};
+static struct x86_quirks default_x86_quirks __initdata;
 
 struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9ce666387f3..9b338aa03b4 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -112,7 +112,7 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 EXPORT_PER_CPU_SYMBOL(cpu_info);
 
-static atomic_t init_deasserted;
+atomic_t init_deasserted;
 
 
 /* Set if we find a B stepping CPU */
@@ -614,12 +614,6 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	unsigned long send_status, accept_status = 0;
 	int maxlvt, num_starts, j;
 
-	if (get_uv_system_type() == UV_NON_UNIQUE_APIC) {
-		send_status = uv_wakeup_secondary(phys_apicid, start_eip);
-		atomic_set(&init_deasserted, 1);
-		return send_status;
-	}
-
 	maxlvt = lapic_get_maxlvt();
 
 	/*
-- 
cgit v1.2.3


From 129d8bc828e011bda0b7110a097bf3a0167f966e Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 25 Feb 2009 21:20:50 -0800
Subject: x86: don't compile vsmp_64 for 32bit

Impact: cleanup

that is only needed when CONFIG_X86_VSMP is defined with 64bit
also remove dead code about PCI, because CONFIG_X86_VSMP depends on PCI

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h  |  7 +++++++
 arch/x86/include/asm/setup.h |  4 ++++
 arch/x86/kernel/Makefile     |  2 +-
 arch/x86/kernel/setup.c      |  2 --
 arch/x86/kernel/vsmp_64.c    | 12 +-----------
 5 files changed, 13 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 860504178e9..24e21273e30 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -75,7 +75,14 @@ static inline void default_inquire_remote_apic(int apicid)
 #define setup_secondary_clock setup_secondary_APIC_clock
 #endif
 
+#ifdef CONFIG_X86_VSMP
 extern int is_vsmp_box(void);
+#else
+static inline int is_vsmp_box(void)
+{
+	return 0;
+}
+#endif
 extern void xapic_wait_icr_idle(void);
 extern u32 safe_xapic_wait_icr_idle(void);
 extern void xapic_icr_write(u32, u32);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 126877e502e..05c6f6b11fd 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -64,7 +64,11 @@ extern void x86_quirk_time_init(void);
 #include <asm/bootparam.h>
 
 /* Interrupt control for vSMPowered x86_64 systems */
+#ifdef CONFIG_X86_VSMP
 void vsmp_init(void);
+#else
+static inline void vsmp_init(void) { }
+#endif
 
 void setup_bios_corruption_check(void);
 
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index de5657c039e..95f216bbfaf 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -70,7 +70,7 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
-obj-y				+= vsmp_64.o
+obj-$(CONFIG_X86_VSMP)		+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_MODULES)		+= module_$(BITS).o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2280d93c5b9..4c54bc0d8ff 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -863,9 +863,7 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_initrd();
 
-#ifdef CONFIG_X86_64
 	vsmp_init();
-#endif
 
 	io_delay_init();
 
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index c609205df59..74de562812c 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -22,7 +22,7 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 
-#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
+#ifdef CONFIG_PARAVIRT
 /*
  * Interrupt control on vSMPowered systems:
  * ~AC is a shadow of IF.  If IF is 'on' AC should be 'off'
@@ -114,7 +114,6 @@ static void __init set_vsmp_pv_ops(void)
 }
 #endif
 
-#ifdef CONFIG_PCI
 static int is_vsmp = -1;
 
 static void __init detect_vsmp_box(void)
@@ -139,15 +138,6 @@ int is_vsmp_box(void)
 		return 0;
 	}
 }
-#else
-static void __init detect_vsmp_box(void)
-{
-}
-int is_vsmp_box(void)
-{
-	return 0;
-}
-#endif
 
 void __init vsmp_init(void)
 {
-- 
cgit v1.2.3


From 0917c01f8e793f57a53cf886533d4c75c67f6e89 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 26 Feb 2009 12:47:40 +0100
Subject: x86: remove update_apic from x86_quirks, fix

Impact: build fix

wakeup_secondary_cpu_via_init(), the default platform method for
booting a secondary CPU, is always used on UP due to probe_32.c,
if CONFIG_X86_LOCAL_APIC is enabled but SMP is off.

So provide a UP wrapper inline as well.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 24e21273e30..0fbf6f1520f 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -331,10 +331,27 @@ struct apic {
 	u32 (*safe_wait_icr_idle)(void);
 };
 
+/*
+ * Pointer to the local APIC driver in use on this system (there's
+ * always just one such driver in use - the kernel decides via an
+ * early probing process which one it picks - and then sticks to it):
+ */
 extern struct apic *apic;
+
+/*
+ * APIC functionality to boot other CPUs - only used on SMP:
+ */
+#ifdef CONFIG_SMP
 extern atomic_t init_deasserted;
 extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
 extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
+#else
+static inline int
+wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip)
+{
+	return 0;
+}
+#endif
 
 static inline u32 apic_read(u32 reg)
 {
-- 
cgit v1.2.3


From 1f5bcabf1b997d6b76a09114b5a79423495a1263 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 26 Feb 2009 13:51:40 +0100
Subject: x86: apic: simplify secondary CPU wakeup methods

Impact: cleanup

- rename apic->wakeup_cpu  to apic->wakeup_secondary_cpu, to
  make it apparent that this is an SMP-only method

- handle NULL ->wakeup_secondary_cpus to mean the default INIT
  wakeup sequence - this allows simplification of the APIC
  driver templates.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h           |  9 +--------
 arch/x86/kernel/apic/apic_flat_64.c   |  2 --
 arch/x86/kernel/apic/bigsmp_32.c      |  1 -
 arch/x86/kernel/apic/es7000_32.c      |  4 +---
 arch/x86/kernel/apic/numaq_32.c       |  2 +-
 arch/x86/kernel/apic/probe_32.c       |  1 -
 arch/x86/kernel/apic/summit_32.c      |  1 -
 arch/x86/kernel/apic/x2apic_cluster.c |  1 -
 arch/x86/kernel/apic/x2apic_phys.c    |  1 -
 arch/x86/kernel/apic/x2apic_uv_x.c    |  2 +-
 arch/x86/kernel/smpboot.c             | 11 ++++++++---
 11 files changed, 12 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 0fbf6f1520f..4ef949c1972 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -313,7 +313,7 @@ struct apic {
 	void (*send_IPI_self)(int vector);
 
 	/* wakeup_secondary_cpu */
-	int (*wakeup_cpu)(int apicid, unsigned long start_eip);
+	int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip);
 
 	int trampoline_phys_low;
 	int trampoline_phys_high;
@@ -344,13 +344,6 @@ extern struct apic *apic;
 #ifdef CONFIG_SMP
 extern atomic_t init_deasserted;
 extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
-extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
-#else
-static inline int
-wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip)
-{
-	return 0;
-}
 #endif
 
 static inline u32 apic_read(u32 reg)
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 00595bc2da8..f933822dba1 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -222,7 +222,6 @@ struct apic apic_flat =  {
 	.send_IPI_all			= flat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
@@ -373,7 +372,6 @@ struct apic apic_physflat =  {
 	.send_IPI_all			= physflat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 8c25917b51a..69c512e23a9 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -256,7 +256,6 @@ struct apic apic_bigsmp = {
 	.send_IPI_all			= bigsmp_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 9f6102fc87a..b4838ed3f26 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -741,7 +741,7 @@ struct apic apic_es7000_cluster = {
 	.send_IPI_all			= es7000_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_mip,
+	.wakeup_secondary_cpu		= wakeup_secondary_cpu_via_mip,
 
 	.trampoline_phys_low		= 0x467,
 	.trampoline_phys_high		= 0x469,
@@ -806,8 +806,6 @@ struct apic apic_es7000 = {
 	.send_IPI_all			= es7000_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
-
 	.trampoline_phys_low		= 0x467,
 	.trampoline_phys_high		= 0x469,
 
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index c503c1799d6..a7f711f5110 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -538,7 +538,7 @@ struct apic apic_numaq = {
 	.send_IPI_all			= numaq_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_nmi,
+	.wakeup_secondary_cpu		= wakeup_secondary_cpu_via_nmi,
 	.trampoline_phys_low		= NUMAQ_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= NUMAQ_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 13c6fc7dff9..141c99a1c26 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -138,7 +138,6 @@ struct apic apic_default = {
 	.send_IPI_all			= default_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 5a75d563f67..0a1135c5a6d 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -574,7 +574,6 @@ struct apic apic_summit = {
 	.send_IPI_all			= summit_send_IPI_all,
 	.send_IPI_self			= default_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 561a6b1042a..8fb87b6dd63 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -224,7 +224,6 @@ struct apic apic_x2apic_cluster = {
 	.send_IPI_all			= x2apic_send_IPI_all,
 	.send_IPI_self			= x2apic_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 785f8ee4b1d..23625b9f98b 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -213,7 +213,6 @@ struct apic apic_x2apic_phys = {
 	.send_IPI_all			= x2apic_send_IPI_all,
 	.send_IPI_self			= x2apic_send_IPI_self,
 
-	.wakeup_cpu			= wakeup_secondary_cpu_via_init,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 6d7b9d960dd..7151de74a39 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -288,7 +288,7 @@ struct apic apic_x2apic_uv_x = {
 	.send_IPI_all			= uv_send_IPI_all,
 	.send_IPI_self			= uv_send_IPI_self,
 
-	.wakeup_cpu			= uv_wakeup_secondary,
+	.wakeup_secondary_cpu		= uv_wakeup_secondary,
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 	.wait_for_init_deassert		= NULL,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9b338aa03b4..249334f5080 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -742,7 +742,8 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
  * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
- * Returns zero if CPU booted OK, else error code from ->wakeup_cpu.
+ * Returns zero if CPU booted OK, else error code from
+ * ->wakeup_secondary_cpu.
  */
 static int __cpuinit do_boot_cpu(int apicid, int cpu)
 {
@@ -829,9 +830,13 @@ do_rest:
 	}
 
 	/*
-	 * Starting actual IPI sequence...
+	 * Kick the secondary CPU. Use the method in the APIC driver
+	 * if it's defined - or use an INIT boot APIC message otherwise:
 	 */
-	boot_error = apic->wakeup_cpu(apicid, start_ip);
+	if (apic->wakeup_secondary_cpu)
+		boot_error = apic->wakeup_secondary_cpu(apicid, start_ip);
+	else
+		boot_error = wakeup_secondary_cpu_via_init(apicid, start_ip);
 
 	if (!boot_error) {
 		/*
-- 
cgit v1.2.3


From 0b1da1c8fc1a0cb71f17701efad06855a059f752 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 26 Feb 2009 14:10:10 +0100
Subject: x86: apic: simplify secondary CPU wakeup methods, fix

Impact: build fix

init_deasserted is only available on SMP. Make the secondary-wakeup
function conditional on SMP.

Also clean up the file some.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 7151de74a39..1bd6da1f8fa 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -7,28 +7,28 @@
  *
  * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
  */
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/cpu.h>
 #include <linux/cpumask.h>
+#include <linux/hardirq.h>
+#include <linux/proc_fs.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
-#include <linux/init.h>
 #include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/hardirq.h>
 #include <linux/timer.h>
-#include <linux/proc_fs.h>
-#include <asm/current.h>
-#include <asm/smp.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-#include <asm/pgtable.h>
-#include <asm/uv/uv.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/current.h>
+#include <asm/pgtable.h>
 #include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
+#include <asm/apic.h>
+#include <asm/ipi.h>
+#include <asm/smp.h>
 
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
@@ -93,6 +93,7 @@ static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
 
 static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
 {
+#ifdef CONFIG_SMP
 	unsigned long val;
 	int pnode;
 
@@ -111,7 +112,7 @@ static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 
 	atomic_set(&init_deasserted, 1);
-
+#endif
 	return 0;
 }
 
@@ -368,7 +369,7 @@ static __init void map_high(char *id, unsigned long base, int shift,
 	paddr = base << shift;
 	bytes = (1UL << shift) * (max_pnode + 1);
 	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
-	       					paddr + bytes);
+						paddr + bytes);
 	if (map_type == map_uc)
 		init_extra_mapping_uc(paddr, bytes);
 	else
@@ -531,7 +532,7 @@ late_initcall(uv_init_heartbeat);
 
 /*
  * Called on each cpu to initialize the per_cpu UV data area.
- * 	ZZZ hotplug not supported yet
+ * FIXME: hotplug not supported yet
  */
 void __cpuinit uv_cpu_init(void)
 {
-- 
cgit v1.2.3


From 3b900d44190c7da8681101c57a5be6b354dab2c7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 26 Feb 2009 14:34:08 +0100
Subject: x86: fix !ACPI build for es7000_32.c

arch/x86/kernel/apic/es7000_32.c:702: error: 'es7000_acpi_madt_oem_check_cluster' undeclared here (not in a function)

Provide a es7000_acpi_madt_oem_check_cluster() definition in the !ACPI
case too.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index b4838ed3f26..da37e2c59fe 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -332,8 +332,9 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 
 	return ret && !es7000_apic_is_cluster();
 }
-static int __init es7000_acpi_madt_oem_check_cluster(char *oem_id,
-						     char *oem_table_id)
+
+static int __init
+es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
 {
 	int ret = es7000_acpi_ret;
 
@@ -345,6 +346,12 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 0;
 }
+
+static int __init
+es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
 #endif /* !CONFIG_ACPI */
 
 static void es7000_spin(int n)
-- 
cgit v1.2.3


From 83ce400928680a6c8123d492684b27857f5a2d95 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 26 Feb 2009 20:16:58 +0100
Subject: x86: set X86_FEATURE_TSC_RELIABLE

If the TSC is constant and non-stop, also set it reliable.

(We will turn this off in DMI quirks for multi-chassis systems)

The performance number on a 16-way Nehalem system running
32 tasks that context-switch between each other is significant:

   sched_clock_stable=0		sched_clock_stable=1
   ....................         ....................
   22.456925 million/sec        24.306972 million/sec   [+8.2%]

lmbench's "lat_ctx -s 0 2" goes from 0.63 microseconds to
0.59 microseconds - a 6.7% increase in context-switching
performance.

Perfstat of 1 million pipe context switches between two tasks:

 Performance counter stats for './pipe-test-1m':

       [before]           [after]
   ............      ............
   37621.421089      36436.848378    task clock ticks     (msecs)

              0                 0    CPU migrations       (events)
        2000274           2000189    context switches     (events)
            194               193    pagefaults           (events)
     8433799643        8171016416    CPU cycles           (events) -3.21%
     8370133368        8180999694    instructions         (events) -2.31%
        4158565           3895941    cache references     (events) -6.74%
          44312             46264    cache misses         (events)

    2349.287976       2279.362465    wall-time            (msecs)  -3.06%

The speedup comes straight from the reduction in the instruction
count. sched_clock_cpu() got simpler and the whole workload thus
executes faster.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/intel.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 24ff26a38ad..5fff00c70de 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -4,6 +4,7 @@
 #include <linux/string.h>
 #include <linux/bitops.h>
 #include <linux/smp.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
 
@@ -56,11 +57,16 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 
 	/*
 	 * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate
-	 * with P/T states and does not stop in deep C-states
+	 * with P/T states and does not stop in deep C-states.
+	 *
+	 * It is also reliable across cores and sockets. (but not across
+	 * cabinets - we turn it off in that case explicitly.)
 	 */
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
+		set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE);
+		sched_clock_stable = 1;
 	}
 
 }
-- 
cgit v1.2.3


From 1febd91acff907152e61eb5ad0a82dd8d7db21c6 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Thu, 26 Feb 2009 13:58:37 -0700
Subject: Revert "i.MX31: framebuffer driver"

This reverts commit 86528da229a448577a8401a17c295883640d336c.

This version of the patch was tab-to-space corrupted before
application.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/plat-mxc/include/mach/mx3fb.h | 38 ----------------------------------
 1 file changed, 38 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/mx3fb.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
deleted file mode 100644
index e391a76ca87..00000000000
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH    0x80000000
-#define FB_SYNC_CLK_INVERT     0x40000000
-#define FB_SYNC_DATA_INVERT    0x20000000
-#define FB_SYNC_CLK_IDLE_EN    0x10000000
-#define FB_SYNC_SHARP_MODE     0x08000000
-#define FB_SYNC_SWAP_RGB       0x04000000
-#define FB_SYNC_CLK_SEL_EN     0x02000000
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev:   pointer to the dma-device, used for dma-slave connection
- * @mode:      pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
-       struct device                   *dma_dev;
-       const char                      *name;
-       const struct fb_videomode       *mode;
-       int                             num_modes;
-};
-
-#endif
-- 
cgit v1.2.3


From 6e1588cbd88590273300403648aef70e6bdaf5af Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lg@denx.de>
Date: Thu, 26 Feb 2009 21:34:28 +0100
Subject: i.MX31: framebuffer driver

This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous
displays, vertical panning supported, no overlay support.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/plat-mxc/include/mach/mx3fb.h | 38 ++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/mx3fb.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
new file mode 100644
index 00000000000..ac24c5c4bc8
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH	0x80000000
+#define FB_SYNC_CLK_INVERT	0x40000000
+#define FB_SYNC_DATA_INVERT	0x20000000
+#define FB_SYNC_CLK_IDLE_EN	0x10000000
+#define FB_SYNC_SHARP_MODE	0x08000000
+#define FB_SYNC_SWAP_RGB	0x04000000
+#define FB_SYNC_CLK_SEL_EN	0x02000000
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev:	pointer to the dma-device, used for dma-slave connection
+ * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+	struct device			*dma_dev;
+	const char			*name;
+	const struct fb_videomode	*mode;
+	int				num_modes;
+};
+
+#endif
-- 
cgit v1.2.3


From 8235ee009cd839265f5dc2dace2758471a823e68 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Sat, 14 Feb 2009 03:15:55 -0500
Subject: [ARM] Kirkwood: SDIO driver registration for DB6281 and RD6281

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                | 45 ++++++++++++++++++++++++++
 arch/arm/mach-kirkwood/common.h                |  2 ++
 arch/arm/mach-kirkwood/db88f6281-bp-setup.c    | 15 +++++++++
 arch/arm/mach-kirkwood/include/mach/kirkwood.h |  2 ++
 arch/arm/mach-kirkwood/rd88f6281-setup.c       | 13 ++++++++
 arch/arm/plat-orion/include/plat/mvsdio.h      | 21 ++++++++++++
 6 files changed, 98 insertions(+)
 create mode 100644 arch/arm/plat-orion/include/plat/mvsdio.h

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b3404b7775b..e5076aae1c6 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -24,6 +24,7 @@
 #include <mach/kirkwood.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
+#include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
 #include <plat/time.h>
@@ -295,6 +296,50 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 }
 
 
+/*****************************************************************************
+ * SD/SDIO/MMC
+ ****************************************************************************/
+static struct resource mvsdio_resources[] = {
+	[0] = {
+		.start	= SDIO_PHYS_BASE,
+		.end	= SDIO_PHYS_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KIRKWOOD_SDIO,
+		.end	= IRQ_KIRKWOOD_SDIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 mvsdio_dmamask = 0xffffffffUL;
+
+static struct platform_device kirkwood_sdio = {
+	.name		= "mvsdio",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &mvsdio_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(mvsdio_resources),
+	.resource	= mvsdio_resources,
+};
+
+void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
+{
+	u32 dev, rev;
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == 0)  /* catch all Kirkwood Z0's */
+		mvsdio_data->clock = 100000000;
+	else
+		mvsdio_data->clock = 200000000;
+	mvsdio_data->dram = &kirkwood_mbus_dram_info;
+	kirkwood_sdio.dev.platform_data = mvsdio_data;
+	platform_device_register(&kirkwood_sdio);
+}
+
+
 /*****************************************************************************
  * SPI
  ****************************************************************************/
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fe367c18e72..58279400cf7 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -14,6 +14,7 @@
 struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
+struct mvsdio_platform_data;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -35,6 +36,7 @@ void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index a14c2948c62..5c3b40d6e09 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -22,7 +22,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
 #include "common.h"
+#include "mpp.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
@@ -32,18 +34,31 @@ static struct mv_sata_platform_data db88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
+static struct mvsdio_platform_data db88f6281_mvsdio_data = {
+	.gpio_write_protect	= 37,
+	.gpio_card_detect	= 38,
+};
+
+static unsigned int db88f6281_mpp_config[] __initdata = {
+	MPP37_GPIO,
+	MPP38_GPIO,
+	0
+};
+
 static void __init db88f6281_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
+	kirkwood_mpp_conf(db88f6281_mpp_config);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
+	kirkwood_sdio_init(&db88f6281_mvsdio_data);
 }
 
 static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index ada480c0e19..d3db30fe763 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -116,5 +116,7 @@
 
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
 
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+
 
 #endif
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index a1ef8a91848..a8b88a5570b 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -24,8 +24,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 static struct mtd_partition rd88f6281_nand_parts[] = {
 	{
@@ -91,6 +93,15 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+	.gpio_card_detect = 28,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+	MPP28_GPIO,
+	0
+};
+
 static void __init rd88f6281_init(void)
 {
 	u32 dev, rev;
@@ -99,6 +110,7 @@ static void __init rd88f6281_init(void)
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
+	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
 	kirkwood_ehci_init();
 
@@ -114,6 +126,7 @@ static void __init rd88f6281_init(void)
 
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
+	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
 	kirkwood_xor0_init();
 	kirkwood_xor1_init();
diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h
new file mode 100644
index 00000000000..14ca8867600
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/mvsdio.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-orion/include/plat/mvsdio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVSDIO_H
+#define __MACH_MVSDIO_H
+
+#include <linux/mbus.h>
+
+struct mvsdio_platform_data {
+	struct mbus_dram_target_info *dram;
+	unsigned int clock;
+	int gpio_card_detect;
+	int gpio_write_protect;
+};
+
+#endif
-- 
cgit v1.2.3


From 3c2613dbbcf1de97ebe10135fe54954cddfc7845 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Sun, 22 Feb 2009 12:56:33 -0500
Subject: [ARM] Kirkwood: add NAND support to the DB88F6281 board

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 47 ++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 5c3b40d6e09..a513e1017c1 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -13,8 +13,8 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
@@ -22,10 +22,53 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
 #include <plat/mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
+static struct mtd_partition db88f6281_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct resource db88f6281_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+			  KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data db88f6281_nand_data = {
+	.parts		= db88f6281_nand_parts,
+	.nr_parts	= ARRAY_SIZE(db88f6281_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+	.chip_delay	= 25,
+};
+
+static struct platform_device db88f6281_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &db88f6281_nand_data,
+	},
+	.resource	= &db88f6281_nand_resource,
+	.num_resources	= 1,
+};
+
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
@@ -59,6 +102,8 @@ static void __init db88f6281_init(void)
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
 	kirkwood_sdio_init(&db88f6281_mvsdio_data);
+	
+	platform_device_register(&db88f6281_nand_flash);
 }
 
 static int __init db88f6281_pci_init(void)
-- 
cgit v1.2.3


From 249cbfa3f5a95d022941af0febbffce5d6609e46 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 26 Feb 2009 21:35:59 -0500
Subject: [ARM] Kirkwood: remove unneeded includes from board setup files

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/db88f6281-bp-setup.c  | 4 ----
 arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 6 +-----
 arch/arm/mach-kirkwood/rd88f6281-setup.c     | 5 +----
 3 files changed, 2 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index a513e1017c1..d7b3bf86c63 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,16 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
 #include <plat/orion_nand.h>
 #include <plat/mvsdio.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index b1d1a87a682..c33d895cc6e 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,11 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/spi/flash.h>
@@ -23,7 +20,6 @@
 #include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index a8b88a5570b..d0890468024 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -11,18 +11,15 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/irq.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
-- 
cgit v1.2.3


From 5b99d5348304a32dfca92238d27ac4de2b365175 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 26 Feb 2009 22:55:59 -0500
Subject: [ARM] Kirkwood: register internal devices in a common place

The RTC and the two XOR engines are internal to the chip, and therefore
always available since they don't depend on a particular board layout.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c              | 11 ++++++++---
 arch/arm/mach-kirkwood/common.h              |  3 ---
 arch/arm/mach-kirkwood/db88f6281-bp-setup.c  |  1 -
 arch/arm/mach-kirkwood/rd88f6192-nas-setup.c |  3 ---
 arch/arm/mach-kirkwood/rd88f6281-setup.c     |  3 ---
 5 files changed, 8 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index e5076aae1c6..9f012551794 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -255,7 +255,7 @@ static struct resource kirkwood_rtc_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
-void __init kirkwood_rtc_init(void)
+static void __init kirkwood_rtc_init(void)
 {
 	platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
 }
@@ -547,7 +547,7 @@ static struct platform_device kirkwood_xor01_channel = {
 	},
 };
 
-void __init kirkwood_xor0_init(void)
+static void __init kirkwood_xor0_init(void)
 {
 	platform_device_register(&kirkwood_xor0_shared);
 
@@ -645,7 +645,7 @@ static struct platform_device kirkwood_xor11_channel = {
 	},
 };
 
-void __init kirkwood_xor1_init(void)
+static void __init kirkwood_xor1_init(void)
 {
 	platform_device_register(&kirkwood_xor1_shared);
 
@@ -753,4 +753,9 @@ void __init kirkwood_init(void)
 #ifdef CONFIG_CACHE_FEROCEON_L2
 	kirkwood_l2_init();
 #endif
+
+	/* internal devices that every board has */
+	kirkwood_rtc_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
 }
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 58279400cf7..9e5282684d5 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -34,14 +34,11 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
-void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
 void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
 
 extern struct sys_timer kirkwood_timer;
 
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d7b3bf86c63..5505d583775 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -94,7 +94,6 @@ static void __init db88f6281_init(void)
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&db88f6281_ge00_data);
-	kirkwood_rtc_init();
 	kirkwood_sata_init(&db88f6281_sata_data);
 	kirkwood_uart0_init();
 	kirkwood_sdio_init(&db88f6281_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index c33d895cc6e..2f0e4ef3db0 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -57,14 +57,11 @@ static void __init rd88f6192_init(void)
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
-	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6192_sata_data);
 	spi_register_board_info(rd88F6192_spi_slave_info,
 				ARRAY_SIZE(rd88F6192_spi_slave_info));
 	kirkwood_spi_init();
 	kirkwood_uart0_init();
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
 }
 
 static int __init rd88f6192_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index d0890468024..c3deea5e3ca 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -121,12 +121,9 @@ static void __init rd88f6281_init(void)
 	}
 	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
 
-	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
 	kirkwood_uart0_init();
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
 
 	platform_device_register(&rd88f6281_nand_flash);
 }
-- 
cgit v1.2.3


From ffba3f48bcd2d8af0570e7d4ce9b86fc4de9b10d Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 26 Feb 2009 22:40:38 -0800
Subject: fec: add FEC platform support to ColdFire CPU's setup code

m68knommu: add FEC platform support to ColdFire CPU's setup code

Move the per-CPU FEC driver setup code into the actual platform
setup code for each ColdFire CPU varient.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/m68knommu/platform/520x/config.c |  56 +++++++++++++++++
 arch/m68knommu/platform/523x/config.c |  51 +++++++++++++++
 arch/m68knommu/platform/5272/config.c |  48 +++++++++++++++
 arch/m68knommu/platform/527x/config.c | 113 +++++++++++++++++++++++++++++++++-
 arch/m68knommu/platform/528x/config.c |  58 +++++++++++++++++
 arch/m68knommu/platform/532x/config.c |  49 +++++++++++++++
 6 files changed, 374 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 06d887cdcbf..855fc6a79d7 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -49,8 +49,39 @@ static struct platform_device m520x_uart = {
 	.dev.platform_data	= m520x_uart_platform,
 };
 
+static struct resource m520x_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x30000,
+		.end		= MCF_MBAR + 0x30000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 36,
+		.end		= 64 + 36,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 40,
+		.end		= 64 + 40,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 42,
+		.end		= 64 + 42,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m520x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m520x_fec_resources),
+	.resource		= m520x_fec_resources,
+};
+
 static struct platform_device *m520x_devices[] __initdata = {
 	&m520x_uart,
+	&m520x_fec,
 };
 
 /***************************************************************************/
@@ -103,6 +134,30 @@ static void __init m520x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m520x_fec_init(void)
+{
+	u32 imr;
+	u8 v;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36);
+	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
+	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
+
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr &= ~0x0001FFF0;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+
+	/* Set multi-function pins to ethernet mode */
+	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
+	writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
+
+	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+	writeb(v | 0x0f, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
 /*
  *  Program the vector to be an auto-vectored.
  */
@@ -118,6 +173,7 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = coldfire_reset;
 	m520x_uarts_init();
+	m520x_fec_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 13f02611ea2..74133f27b30 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -50,8 +50,39 @@ static struct platform_device m523x_uart = {
 	.dev.platform_data	= m523x_uart_platform,
 };
 
+static struct resource m523x_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1000,
+		.end		= MCF_MBAR + 0x1000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 23,
+		.end		= 64 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 27,
+		.end		= 64 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 29,
+		.end		= 64 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m523x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m523x_fec_resources),
+	.resource		= m523x_fec_resources,
+};
+
 static struct platform_device *m523x_devices[] __initdata = {
 	&m523x_uart,
+	&m523x_fec,
 };
 
 /***************************************************************************/
@@ -83,6 +114,25 @@ static void __init m523x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m523x_fec_init(void)
+{
+	u32 imr;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
+	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
+	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
+
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr &= ~0xf;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+	imr &= ~0xff800001;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
@@ -103,6 +153,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_disableall();
 	mach_reset = coldfire_reset;
 	m523x_uarts_init();
+	m523x_fec_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 230bae691a7..e049245f409 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -55,8 +55,39 @@ static struct platform_device m5272_uart = {
 	.dev.platform_data	= m5272_uart_platform,
 };
 
+static struct resource m5272_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x840,
+		.end		= MCF_MBAR + 0x840 + 0x1cf,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 86,
+		.end		= 86,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 87,
+		.end		= 87,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 88,
+		.end		= 88,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5272_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5272_fec_resources),
+	.resource		= m5272_fec_resources,
+};
+
 static struct platform_device *m5272_devices[] __initdata = {
 	&m5272_uart,
+	&m5272_fec,
 };
 
 /***************************************************************************/
@@ -91,6 +122,22 @@ static void __init m5272_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m5272_fec_init(void)
+{
+	u32 imr;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	imr = readl(MCF_MBAR + MCFSIM_ICR3);
+	imr = (imr & ~0x00000fff) | 0x00000ddd;
+	writel(imr, MCF_MBAR + MCFSIM_ICR3);
+
+	imr = readl(MCF_MBAR + MCFSIM_ICR1);
+	imr = (imr & ~0x0f000000) | 0x0d000000;
+	writel(imr, MCF_MBAR + MCFSIM_ICR1);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	volatile unsigned long	*icrp;
@@ -155,6 +202,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
+	m5272_fec_init();
 	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index 73cd1aef4a9..49343fb157b 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -50,8 +50,73 @@ static struct platform_device m527x_uart = {
 	.dev.platform_data	= m527x_uart_platform,
 };
 
+static struct resource m527x_fec0_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1000,
+		.end		= MCF_MBAR + 0x1000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 23,
+		.end		= 64 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 27,
+		.end		= 64 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 29,
+		.end		= 64 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource m527x_fec1_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1800,
+		.end		= MCF_MBAR + 0x1800 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 128 + 23,
+		.end		= 128 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 128 + 27,
+		.end		= 128 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 128 + 29,
+		.end		= 128 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m527x_fec[] = {
+	{
+		.name		= "fec",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(m527x_fec0_resources),
+		.resource	= m527x_fec0_resources,
+	},
+	{
+		.name		= "fec",
+		.id		= 1,
+		.num_resources	= ARRAY_SIZE(m527x_fec1_resources),
+		.resource	= m527x_fec1_resources,
+	},
+};
+
 static struct platform_device *m527x_devices[] __initdata = {
 	&m527x_uart,
+	&m527x_fec[0],
+#ifdef CONFIG_FEC2
+	&m527x_fec[1],
+#endif
 };
 
 /***************************************************************************/
@@ -97,6 +162,51 @@ static void __init m527x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m527x_fec_irq_init(int nr)
+{
+	unsigned long base;
+	u32 imr;
+
+	base = MCF_IPSBAR + (nr ? MCFICM_INTC1 : MCFICM_INTC0);
+
+	writeb(0x28, base + MCFINTC_ICR0 + 23);
+	writeb(0x27, base + MCFINTC_ICR0 + 27);
+	writeb(0x26, base + MCFINTC_ICR0 + 29);
+
+	imr = readl(base + MCFINTC_IMRH);
+	imr &= ~0xf;
+	writel(imr, base + MCFINTC_IMRH);
+	imr = readl(base + MCFINTC_IMRL);
+	imr &= ~0xff800001;
+	writel(imr, base + MCFINTC_IMRL);
+}
+
+static void __init m527x_fec_init(void)
+{
+	u16 par;
+	u8 v;
+
+	m527x_fec_irq_init(0);
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100078);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+
+#ifdef CONFIG_FEC2
+	m527x_fec_irq_init(1);
+
+	/* Set multi-function pins to ethernet mode for fec1 */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100079);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
+#endif
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
@@ -116,13 +226,14 @@ void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
 	mach_reset = coldfire_reset;
+	m527x_uarts_init();
+	m527x_fec_init();
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m527x_uarts_init();
 	platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index dfdb5c2ed8e..2ffb549876f 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -285,8 +285,40 @@ static struct platform_device m528x_uart = {
 	.dev.platform_data	= m528x_uart_platform,
 };
 
+static struct resource m528x_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1000,
+		.end		= MCF_MBAR + 0x1000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 23,
+		.end		= 64 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 27,
+		.end		= 64 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 29,
+		.end		= 64 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m528x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m528x_fec_resources),
+	.resource		= m528x_fec_resources,
+};
+
+
 static struct platform_device *m528x_devices[] __initdata = {
 	&m528x_uart,
+	&m528x_fec,
 };
 
 /***************************************************************************/
@@ -327,6 +359,31 @@ static void __init m528x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m528x_fec_init(void)
+{
+	u32 imr;
+	u16 v16;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
+	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
+	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
+
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr &= ~0xf;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+	imr &= ~0xff800001;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	v16 = readw(MCF_IPSBAR + 0x100056);
+	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
+	writeb(0xc0, MCF_IPSBAR + 0x100058);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
@@ -386,6 +443,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m528x_uarts_init();
+	m528x_fec_init();
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index a347623d6ee..591f2f80113 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -61,8 +61,38 @@ static struct platform_device m532x_uart = {
 	.dev.platform_data	= m532x_uart_platform,
 };
 
+static struct resource m532x_fec_resources[] = {
+	{
+		.start		= 0xfc030000,
+		.end		= 0xfc0307ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 36,
+		.end		= 64 + 36,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 40,
+		.end		= 64 + 40,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 42,
+		.end		= 64 + 42,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m532x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m532x_fec_resources),
+	.resource		= m532x_fec_resources,
+};
 static struct platform_device *m532x_devices[] __initdata = {
 	&m532x_uart,
+	&m532x_fec,
 };
 
 /***************************************************************************/
@@ -93,6 +123,24 @@ static void __init m532x_uarts_init(void)
 	for (line = 0; (line < nrlines); line++)
 		m532x_uart_init_line(line, m532x_uart_platform[line].irq);
 }
+/***************************************************************************/
+
+static void __init m532x_fec_init(void)
+{
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	MCF_INTC0_ICR36 = 0x2;
+	MCF_INTC0_ICR40 = 0x2;
+	MCF_INTC0_ICR42 = 0x2;
+
+	MCF_INTC0_IMRH &= ~(MCF_INTC_IMRH_INT_MASK36 |
+		MCF_INTC_IMRH_INT_MASK40 | MCF_INTC_IMRH_INT_MASK42);
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+		MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
 
 /***************************************************************************/
 
@@ -150,6 +198,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m532x_uarts_init();
+	m532x_fec_init();
 	platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
 	return 0;
 }
-- 
cgit v1.2.3


From 1d015cf02a1fd46385c03cf3ce8958dbea705dd3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 23 Feb 2009 07:14:02 +0000
Subject: sh: shared register saving code for sh3/sh4/sh4a

This patch reworks the sh3/sh4/sh4a register saving code in
the following ways:
 - break out prepare_stack_save_dsp() from handle_exception()
 - break out save_regs() from handle_exception()
 - the register saving order is unchanged
 - align new functions to fit in cache lines
 - separate exception code from interrupt code
 - keep main code flow in a single cache line per exception vector
 - use bsr/rts for regular functions (save pr first)
 - keep data in one shared cache line (exception_data)
 - document the functions
 - tie in the hp6xx code

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-hp6xx/pm_wakeup.S |  31 +---
 arch/sh/kernel/cpu/sh3/entry.S        | 273 ++++++++++++++++++----------------
 2 files changed, 155 insertions(+), 149 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
index 44b648cf6f2..4f18d44e054 100644
--- a/arch/sh/boards/mach-hp6xx/pm_wakeup.S
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -10,47 +10,32 @@
 #include <linux/linkage.h>
 #include <cpu/mmu_context.h>
 
-#define k0	r0
-#define k1	r1
-#define k2	r2
-#define k3	r3
-#define k4	r4
-
 /*
  * Kernel mode register usage:
  *	k0	scratch
  *	k1	scratch
- *	k2	scratch (Exception code)
- *	k3	scratch (Return address)
- *	k4	scratch
- *	k5	reserved
- *	k6	Global Interrupt Mask (0--15 << 4)
- *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ * For more details, please have a look at entry.S
  */
 
+#define k0	r0
+#define k1	r1
+
 ENTRY(wakeup_start)
 ! clear STBY bit
-	mov	#-126, k2
+	mov	#-126, k1
    	and	#127, k0
-	mov.b	k0, @k2
+	mov.b	k0, @k1
 ! enable refresh
 	mov.l	5f, k1
 	mov.w	6f, k0
   	mov.w	k0, @k1
 ! jump to handler
-	mov.l	2f, k2
-	mov.l	3f, k3
-	mov.l	@k2, k2
-
 	mov.l	4f, k1
 	jmp	@k1
-	nop
+	 nop
 
 	.align	2
-1:	.long	EXPEVT
-2:	.long	INTEVT
-3:	.long	ret_from_irq
-4:	.long	handle_exception
+4:	.long	handle_interrupt
 5:	.long	0xffffff68
 6:	.word	0x0524
 
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index b4106d0c68e..f3db143e70b 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -16,6 +16,7 @@
 #include <asm/unistd.h>
 #include <cpu/mmu_context.h>
 #include <asm/page.h>
+#include <asm/cache.h>
 
 ! NOTE:
 ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
@@ -294,7 +295,7 @@ skip_restore:
 	mov	#0xf0, k1
 	extu.b	k1, k1
 	not	k1, k1
-	and	k1, k2			! Mask orignal SR value
+	and	k1, k2			! Mask original SR value
 	!
 	mov	k3, k0			! Calculate IMASK-bits
 	shlr2	k0
@@ -335,82 +336,54 @@ skip_restore:
 	.balign 	4096,0,4096
 ENTRY(vbr_base)
 	.long	0
+!
+! 0x100: General exception vector
 !
 	.balign 	256,0,256
 general_exception:
-	mov.l	1f, k2
-	mov.l	2f, k3
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
-	mov.l	@k2, k2
+#ifndef CONFIG_CPU_SUBTYPE_SHX3
+	bra	handle_exception
+	 sts	pr, k3		! save original pr value in k3
+#else
+	mov.l	1f, k4
+	mov.l	@k4, k4
 
 	! Is EXPEVT larger than 0x800?
 	mov	#0x8, k0
 	shll8	k0
-	cmp/hs	k0, k2
+	cmp/hs	k0, k4
 	bf	0f
 
 	! then add 0x580 (k2 is 0xd80 or 0xda0)
 	mov	#0x58, k0
 	shll2	k0
 	shll2	k0
-	add	k0, k2
+	add	k0, k4
 0:
-	bra	handle_exception
+	! Setup stack and save DSP context (k0 contains original r15 on return)
+	bsr	prepare_stack_save_dsp
 	 nop
-#else
-	bra	handle_exception
-	 mov.l	@k2, k2
-#endif
-	.align	2
-1:	.long	EXPEVT
-2:	.long	ret_from_exception
-!
-!
 
-	.balign 	1024,0,1024
-tlb_miss:
-	mov.l	1f, k2
-	mov.l	4f, k3
-	bra	handle_exception
-	 mov.l	@k2, k2
-!
-	.balign 	512,0,512
-interrupt:
-	mov.l	3f, k3
-#if defined(CONFIG_KGDB)
-	mov.l	2f, k2
-	! Debounce (filter nested NMI)
-	mov.l	@k2, k0
-	mov.l	5f, k1
-	cmp/eq	k1, k0
-	bf	0f
-	mov.l	6f, k1
-	tas.b	@k1
-	bt	0f
-	rte
+	! Save registers / Switch to bank 0
+	bsr	save_regs	! needs original pr value in k3
+	 mov.l	k4, k2		! keep vector in k2
+
+	bra	handle_exception_special
 	 nop
-	.align	2
-2:	.long	INTEVT
-5:	.long	NMI_VEC
-6:	.long	in_nmi
-0:
-#endif /* defined(CONFIG_KGDB) */
-	bra	handle_exception
-	 mov	#-1, k2		! interrupt exception marker
 
 	.align	2
 1:	.long	EXPEVT
-3:	.long	ret_from_irq
-4:	.long	ret_from_exception
+#endif
 
-!
-!
-	.align	2
-ENTRY(handle_exception)
-	! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
-	! save all registers onto stack.
-	!
+! prepare_stack_save_dsp()
+! - roll back gRB
+! - switch to kernel stack
+! - save DSP
+! k0 returns original sp (after roll back)
+! k1 trashed
+! k2 trashed
 
+prepare_stack_save_dsp:
 #ifdef CONFIG_GUSA
 	! Check for roll back gRB (User and Kernel)
 	mov	r15, k0
@@ -430,7 +403,7 @@ ENTRY(handle_exception)
 2:	mov	k1, r15		! SP = r1
 1:
 #endif
-
+	! Switch to kernel stack if needed
 	stc	ssr, k0		! Is it from kernel space?
 	shll	k0		! Check MD bit (bit30) by shifting it into...
 	shll	k0		!       ...the T bit
@@ -443,18 +416,17 @@ ENTRY(handle_exception)
 	add	current, k1
 	mov	k1, r15		! change to kernel stack
 	!
-1:	mov.l	2f, k1
-	!
+1:
 #ifdef CONFIG_SH_DSP
-	mov.l	r2, @-r15		! Save r2, we need another reg
-	stc	sr, k4
-	mov.l	1f, r2
-	tst	r2, k4			! Check if in DSP mode
-	mov.l	@r15+, r2		! Restore r2 now
+	! Save DSP context if needed
+	stc	sr, k1
+	mov	#0x10, k2
+	shll8   k2			! DSP=1 (0x00001000)
+	tst	k2, k1			! Check if in DSP mode (passed in k2)
 	bt/s	skip_save
-	 mov	#0, k4			! Set marker for no stack frame
+	 mov	#0, k1			! Set marker for no stack frame
 
-	mov	r2, k4			! Backup r2 (in k4) for later
+	mov	k2, k1			! Save has-frame marker
 
 	! Save DSP registers on stack
 	stc.l	mod, @-r15
@@ -473,35 +445,73 @@ ENTRY(handle_exception)
 	! as we're not at all interested in supporting ancient toolchains at
 	! this point. -- PFM.
 
-	mov	r15, r2
+	mov	r15, k2
 	.word	0xf653			! movs.l	a1, @-r2
 	.word	0xf6f3			! movs.l	a0g, @-r2
 	.word	0xf6d3			! movs.l	a1g, @-r2
 	.word	0xf6c3			! movs.l	m0, @-r2
 	.word	0xf6e3			! movs.l	m1, @-r2
-	mov	r2, r15
+	mov	k2, r15
 
-	mov	k4, r2			! Restore r2
-	mov.l	1f, k4			! Force DSP stack frame
 skip_save:
-	mov.l	k4, @-r15		! Push DSP mode marker onto stack
+	mov.l	k1, @-r15		! Push DSP mode marker onto stack
 #endif
-	! Save the user registers on the stack.
-	mov.l	k2, @-r15	! EXPEVT
+	rts
+	 nop
+!
+! 0x400: Instruction and Data TLB miss exception vector
+!
+	.balign 	1024,0,1024
+tlb_miss:
+	sts	pr, k3		! save original pr value in k3
 
-	mov	#-1, k4
-	mov.l	k4, @-r15	! set TRA (default: -1)
-	!
+handle_exception:
+	! Setup stack and save DSP context (k0 contains original r15 on return)
+	bsr	prepare_stack_save_dsp
+	 nop
+
+	! Save registers / Switch to bank 0
+	mov.l	5f, k2		! vector register address
+	bsr	save_regs	! needs original pr value in k3
+	 mov.l	@k2, k2		! read out vector and keep in k2
+
+handle_exception_special:
+	! Setup return address and jump to exception handler
+	mov.l	7f, r9		! fetch return address
+	stc	r2_bank, r0	! k2 (vector)
+	mov.l	6f, r10
+	shlr2	r0
+	shlr	r0
+	mov.l	@(r0, r10), r10
+	jmp	@r10
+	 lds	r9, pr		! put return address in pr
+
+	.align	L1_CACHE_SHIFT
+
+! save_regs()
+! - save vector, default tra, macl, mach, gbr, ssr, pr* and spc on the stack
+! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
+! - switch bank
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k0 contains original stack pointer*
+! k1 trashed
+! k2 passes vector (EXPEVT)
+! k3 passes original pr*
+! k4 trashed
+! BL=1 on entry, on exit BL=0.
+
+save_regs:
+	mov	#-1, r1
+	mov.l	k2, @-r15	! vector in k2
+	mov.l	k1, @-r15	! set TRA (default: -1)
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
 	stc.l	gbr, @-r15
 	stc.l	ssr, @-r15
-	sts.l	pr, @-r15
+	mov.l	k3, @-r15	! original pr in k3
 	stc.l	spc, @-r15
-	!
-	lds	k3, pr		! Set the return address to pr
-	!
-	mov.l	k0, @-r15	! save orignal stack
+
+	mov.l	k0, @-r15	! original stack pointer in k0
 	mov.l	r14, @-r15
 	mov.l	r13, @-r15
 	mov.l	r12, @-r15
@@ -509,13 +519,15 @@ skip_save:
 	mov.l	r10, @-r15
 	mov.l	r9, @-r15
 	mov.l	r8, @-r15
-	!
-	stc	sr, r8		! Back to normal register bank, and
-	or	k1, r8		! Block all interrupts
-	mov.l	3f, k1
-	and	k1, r8		! ...
-	ldc	r8, sr		! ...changed here.
-	!
+
+	mov.l	0f, k3		! SR bits to set in k3
+	mov.l	1f, k4		! SR bits to clear in k4
+
+	stc	sr, r8
+	or	k3, r8
+	and	k4, r8
+	ldc	r8, sr
+
 	mov.l	r7, @-r15
 	mov.l	r6, @-r15
 	mov.l	r5, @-r15
@@ -523,52 +535,61 @@ skip_save:
 	mov.l	r3, @-r15
 	mov.l	r2, @-r15
 	mov.l	r1, @-r15
-	mov.l	r0, @-r15
-
-	/*
-	 * This gets a bit tricky.. in the INTEVT case we don't want to use
-	 * the VBR offset as a destination in the jump call table, since all
-	 * of the destinations are the same. In this case, (interrupt) sets
-	 * a marker in r2 (now r2_bank since SR.RB changed), which we check
-	 * to determine the exception type. For all other exceptions, we
-	 * forcibly read EXPEVT from memory and fix up the jump address, in
-	 * the interrupt exception case we jump to do_IRQ() and defer the
-	 * INTEVT read until there. As a bonus, we can also clean up the SR.RB
-	 * checks that do_IRQ() was doing..
-	 */
-	stc	r2_bank, r8
-	cmp/pz	r8
-	bf	interrupt_exception
-	shlr2	r8
-	shlr	r8
-	mov.l	4f, r9
-	add	r8, r9
-	mov.l	@r9, r9
-	jmp	@r9
-	 nop
 	rts
-	 nop
+	 mov.l	r0, @-r15
 
+!
+! 0x600: Interrupt / NMI vector
+!
+	.balign 	512,0,512
+ENTRY(handle_interrupt)
+#if defined(CONFIG_KGDB)
+	mov.l	2f, k2
+	! Debounce (filter nested NMI)
+	mov.l	@k2, k0
+	mov.l	9f, k1
+	cmp/eq	k1, k0
+	bf	11f
+	mov.l	10f, k1
+	tas.b	@k1
+	bt	11f
+	rte
+	 nop
 	.align	2
-1:	.long	0x00001000	! DSP=1
-2:	.long	0x000080f0	! FD=1, IMASK=15
-3:	.long	0xcfffffff	! RB=0, BL=0
-4:	.long	exception_handling_table
+9:	.long	NMI_VEC
+10:	.long	in_nmi
+11:
+#endif /* defined(CONFIG_KGDB) */
+	sts	pr, k3		! save original pr value in k3
 
-interrupt_exception:
-	mov.l	1f, r9
-	mov.l	2f, r4
-	mov.l	@r4, r4
-	jmp	@r9
-	 mov	r15, r5
-	rts
+	! Setup stack and save DSP context (k0 contains original r15 on return)
+	bsr	prepare_stack_save_dsp
 	 nop
 
-	.align 2
-1:	.long	do_IRQ
-2:	.long	INTEVT
+	! Save registers / Switch to bank 0
+	bsr	save_regs	! needs original pr value in k3
+	 mov	#-1, k2		! default vector kept in k2
+
+	! Setup return address and jump to do_IRQ
+	mov.l	4f, r9		! fetch return address
+	lds	r9, pr		! put return address in pr
+	mov.l	2f, r4
+	mov.l	3f, r9
+	mov.l	@r4, r4		! pass INTEVT vector as arg0
+	jmp	@r9
+	 mov	r15, r5		! pass saved registers as arg1
 
-	.align	2
 ENTRY(exception_none)
 	rts
 	 nop
+
+	.align	L1_CACHE_SHIFT
+exception_data:
+0:	.long	0x000080f0	! FD=1, IMASK=15
+1:	.long	0xcfffffff	! RB=0, BL=0
+2:	.long	INTEVT
+3:	.long	do_IRQ
+4:	.long	ret_from_irq
+5:	.long	EXPEVT
+6:	.long	exception_handling_table
+7:	.long	ret_from_exception
-- 
cgit v1.2.3


From 1dd22722f6bf9be9821657a2d59fae4d4365fb32 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 23 Feb 2009 07:15:07 +0000
Subject: sh: rework register restore code for sh3/sh4/sh4a

This patch reworks the sh3/sh4/sh4a register restore code in
the following ways:
 - break out restore_regs() from restore_all()
 - the register saving order is unchanged
 - use restore_regs() in sh_bios_handler and restore_all
 - document the function

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 68 ++++++++++++++++++++----------------------
 1 file changed, 33 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index f3db143e70b..cbffbffce35 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -188,44 +188,35 @@ call_dae:
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
-	mov.l	@r15+, r0
-	mov.l	@r15+, r1
-	mov.l	@r15+, r2
-	mov.l	@r15+, r3
-	mov.l	@r15+, r4
-	mov.l	@r15+, r5
-	mov.l	@r15+, r6
-	mov.l	@r15+, r7
-	stc	sr, r8
-	mov.l	1f, r9			! BL =1, RB=1, IMASK=0x0F
-	or	r9, r8
-	ldc	r8, sr			! here, change the register bank
-	mov.l	@r15+, r8
-	mov.l	@r15+, r9
-	mov.l	@r15+, r10
-	mov.l	@r15+, r11
-	mov.l	@r15+, r12
-	mov.l	@r15+, r13
-	mov.l	@r15+, r14
-	mov.l	@r15+, k0
-	ldc.l	@r15+, spc
-	lds.l	@r15+, pr
-	mov.l	@r15+, k1
-	ldc.l	@r15+, gbr
-	lds.l	@r15+, mach
-	lds.l	@r15+, macl
-	mov	k0, r15
+	mov.l	1f, r8
+	bsr	restore_regs
+	 nop
+
+	lds	k2, pr			! restore pr
+	mov	k4, r15
 	!
 	mov.l	2f, k0
 	mov.l	@k0, k0
 	jmp	@k0
-	 ldc	k1, ssr
+	 ldc	k3, ssr
 	.align	2
 1:	.long	0x300000f0
 2:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
 
-restore_all:
+! restore_regs()
+! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
+! - switch bank
+! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
+! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
+! k2 returns original pr
+! k3 returns original sr
+! k4 returns original stack pointer
+! r8 passes SR bitmask, overwritten with restored data on return
+! r9 trashed
+! BL=0 on entry, on exit BL=1 (depending on r8).
+
+restore_regs:
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
 	mov.l	@r15+, r2
@@ -235,10 +226,9 @@ restore_all:
 	mov.l	@r15+, r6
 	mov.l	@r15+, r7
 	!
-	stc	sr, r8
-	mov.l	7f, r9
-	or	r9, r8			! BL =1, RB=1
-	ldc	r8, sr			! here, change the register bank
+	stc	sr, r9
+	or	r8, r9
+	ldc	r9, sr
 	!
 	mov.l	@r15+, r8
 	mov.l	@r15+, r9
@@ -249,12 +239,20 @@ restore_all:
 	mov.l	@r15+, r14
 	mov.l	@r15+, k4		! original stack pointer
 	ldc.l	@r15+, spc
-	lds.l	@r15+, pr
+	mov.l	@r15+, k2		! original PR
 	mov.l	@r15+, k3		! original SR
 	ldc.l	@r15+, gbr
 	lds.l	@r15+, mach
 	lds.l	@r15+, macl
-	add	#4, r15			! Skip syscall number
+	rts
+	 add	#4, r15			! Skip syscall number
+
+restore_all:
+	mov.l	7f, r8
+	bsr	restore_regs
+	 nop
+
+	lds	k2, pr			! restore pr
 	!
 #ifdef CONFIG_SH_DSP
 	mov.l	@r15+, k0		! DSP mode marker
-- 
cgit v1.2.3


From 4f099ebb27211d378304ddcfa507097f5128f5b9 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 23 Feb 2009 07:16:34 +0000
Subject: sh: remove EXPEVT vector from stack on sh3/sh4/sh4a

Remove EXPEVT vector from the stack, lookup_exception_vector()
for sh3/sh4/sh4a is already using k2 to get the vector.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/ptrace.h   | 8 +++-----
 arch/sh/kernel/cpu/sh3/entry.S | 5 +----
 2 files changed, 4 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index 12912ab80c1..81c6568fdb3 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -122,14 +122,12 @@ extern void user_disable_single_step(struct task_struct *);
 #ifdef CONFIG_SH_DSP
 #define task_pt_regs(task) \
 	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+		 - sizeof(struct pt_dspregs)) - 1)
 #define task_pt_dspregs(task) \
-	((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(unsigned long)) - 1)
+	((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE) - 1)
 #else
 #define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(unsigned long)) - 1)
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
 #endif
 
 static inline unsigned long profile_pc(struct pt_regs *regs)
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index cbffbffce35..0271fe08de2 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -312,7 +312,6 @@ skip_restore:
 	mov	#0, k1
 	mov.b	k1, @k0
 #endif
-	mov.l	@r15+, k2		! restore EXPEVT
 	mov	k4, r15
 	rte
 	 nop
@@ -487,20 +486,18 @@ handle_exception_special:
 	.align	L1_CACHE_SHIFT
 
 ! save_regs()
-! - save vector, default tra, macl, mach, gbr, ssr, pr* and spc on the stack
+! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
 ! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
 ! - switch bank
 ! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
 ! k0 contains original stack pointer*
 ! k1 trashed
-! k2 passes vector (EXPEVT)
 ! k3 passes original pr*
 ! k4 trashed
 ! BL=1 on entry, on exit BL=0.
 
 save_regs:
 	mov	#-1, r1
-	mov.l	k2, @-r15	! vector in k2
 	mov.l	k1, @-r15	! set TRA (default: -1)
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
-- 
cgit v1.2.3


From 0197f21ca5c5ed0df2a14a60ef073e8163e6533b Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 27 Feb 2009 16:41:17 +0900
Subject: sh: prefetch early exception data on sh4/sh4a.

Prefetch early exception data. There is unused space in our
exception handler cache line anyway, so this is almost free.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/entry-macros.S | 5 +++++
 arch/sh/kernel/cpu/sh3/entry.S     | 7 +++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 2dab0b8d945..3a4752a6572 100644
--- a/arch/sh/include/asm/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
@@ -31,3 +31,8 @@
 #endif	
 	.endm
 
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
+# define PREF(x)	pref	@x
+#else
+# define PREF(x)	nop
+#endif
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 0271fe08de2..e984e94394e 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -463,9 +463,11 @@ tlb_miss:
 	sts	pr, k3		! save original pr value in k3
 
 handle_exception:
+	mova	exception_data, k0
+
 	! Setup stack and save DSP context (k0 contains original r15 on return)
 	bsr	prepare_stack_save_dsp
-	 nop
+	 PREF(k0)
 
 	! Save registers / Switch to bank 0
 	mov.l	5f, k2		! vector register address
@@ -556,10 +558,11 @@ ENTRY(handle_interrupt)
 11:
 #endif /* defined(CONFIG_KGDB) */
 	sts	pr, k3		! save original pr value in k3
+	mova	exception_data, k0
 
 	! Setup stack and save DSP context (k0 contains original r15 on return)
 	bsr	prepare_stack_save_dsp
-	 nop
+	 PREF(k0)
 
 	! Save registers / Switch to bank 0
 	bsr	save_regs	! needs original pr value in k3
-- 
cgit v1.2.3


From a73090ffaf0f6853880d9ac3fff7e5d88215131a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 27 Feb 2009 16:42:05 +0900
Subject: sh: Disable unsupportable prefetching on SH-3.

The SH-3 does not support 'pref'-based prefetching, only SH-2A and SH-4A
parts do. Remove SH-3 from the list.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/processor_32.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index dcaed24c71f..efdd78a53b1 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -191,8 +191,7 @@ extern unsigned long get_wchan(struct task_struct *p);
 
 #define user_stack_pointer(_regs)	((_regs)->regs[15])
 
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
-    defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
 #define PREFETCH_STRIDE		L1_CACHE_BYTES
 #define ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCHW
-- 
cgit v1.2.3


From 3e91faec47e9e12b965c952d698b0bb64847af06 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 24 Feb 2009 22:23:51 +0900
Subject: sh: fix P4 iounmap() pass-through

Fix iounmap() of pass-through P4 addresses. Without this patch
iounmap() on the sh7780 rtc area results in a warning message.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/ioremap_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index 32946fba123..8dc77026a0b 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -119,7 +119,7 @@ void __iounmap(void __iomem *addr)
 	unsigned long seg = PXSEG(vaddr);
 	struct vm_struct *p;
 
-	if (seg < P3SEG || seg >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
+	if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
 		return;
 
 #ifdef CONFIG_32BIT
-- 
cgit v1.2.3


From bdaa6e8062d7f8085d8ed94ff88c99406ad53d79 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 24 Feb 2009 22:58:57 +0900
Subject: sh: multiple vectors per irq - base

Instead of keeping the single vector -> single linux irq mapping
we extend the intc code to support merging of vectors to a single
linux irq. This helps processors such as sh7750, sh7780 and sh7785
which have more vectors than masking ability. With this patch in
place we can modify the intc tables to use one irq per maskable
irq source. Please note the following:

 - If multiple vectors share the same enum then only the
   first vector will be available as a linux irq.

 - Drivers may need to be rewritten to get pending irq
   source from the hardware block instead of irq number.

This patch together with the sh7785 specific intc tables solves
DMA controller irq issues related to buggy interrupt masking.

Reported-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 64b7690c664..90d63aefd27 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -106,7 +106,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 	}
 #endif
 
-	irq = irq_demux(evt2irq(irq));
+	irq = irq_demux(intc_evt2irq(irq));
 
 #ifdef CONFIG_IRQSTACKS
 	curctx = (union irq_ctx *)current_thread_info();
-- 
cgit v1.2.3


From 69977e7e25a291fd71c6dcaf2c5ea9e776afede5 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 24 Feb 2009 22:59:04 +0900
Subject: sh: multiple vectors per irq - sh7750

Update intc tables and platform data to use one linux irq
per maskable interrupt source instead of keeping the one-to-one
mapping between vectors and linux irqs.

This fixes potential irq masking issues for sh775x hardware
blocks such as SCI/SCIF/RTC/DMAC/TMU2/REF.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4/setup-sh7750.c | 87 ++++++++++-------------------------
 1 file changed, 25 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index ec884039b91..a1c80d909cd 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -21,17 +21,7 @@ static struct resource rtc_resources[] = {
 		.flags	= IORESOURCE_IO,
 	},
 	[1] = {
-		/* Period IRQ */
-		.start	= 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= 22,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
+		/* Shared Period/Carry/Alarm IRQ */
 		.start	= 20,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -50,13 +40,13 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCI,
-		.irqs		= { 23, 24, 25, 0 },
+		.irqs		= { 23, 23, 23, 0 },
 	}, {
 #endif
 		.mapbase	= 0xffe80000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 40, 41, 43, 42 },
+		.irqs		= { 40, 40, 40, 40 },
 	}, {
 		.flags = 0,
 	}
@@ -87,43 +77,27 @@ enum {
 
 	/* interrupt sources */
 	IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
-	HUDI, GPIOI,
-	DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3,
-	DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7,
-	DMAC_DMAE,
+	HUDI, GPIOI, DMAC,
 	PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
 	PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3,
-	TMU3, TMU4, TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
-	RTC_ATI, RTC_PRI, RTC_CUI,
-	SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI,
-	SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI,
-	WDT,
-	REF_RCMI, REF_ROVI,
+	TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF,
 
 	/* interrupt groups */
-	DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF,
+	PCIC1,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
-	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
-	INTC_VECT(RTC_CUI, 0x4c0),
-	INTC_VECT(SCI1_ERI, 0x4e0), INTC_VECT(SCI1_RXI, 0x500),
-	INTC_VECT(SCI1_TXI, 0x520), INTC_VECT(SCI1_TEI, 0x540),
-	INTC_VECT(SCIF_ERI, 0x700), INTC_VECT(SCIF_RXI, 0x720),
-	INTC_VECT(SCIF_BRI, 0x740), INTC_VECT(SCIF_TXI, 0x760),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500),
+	INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540),
+	INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
+	INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
 	INTC_VECT(WDT, 0x560),
-	INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0),
-};
-
-static struct intc_group groups[] __initdata = {
-	INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
-	INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI),
-	INTC_GROUP(SCIF, SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI),
-	INTC_GROUP(REF, REF_RCMI, REF_ROVI),
+	INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
 };
 
 static struct intc_prio_reg prio_registers[] __initdata = {
@@ -136,7 +110,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 						 PCIC1, PCIC0_PCISERR } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 /* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */
@@ -145,39 +119,28 @@ static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups,
 	defined(CONFIG_CPU_SUBTYPE_SH7751) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7091)
 static struct intc_vect vectors_dma4[] __initdata = {
-	INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
-	INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
-	INTC_VECT(DMAC_DMAE, 0x6c0),
-};
-
-static struct intc_group groups_dma4[] __initdata = {
-	INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
-		   DMAC_DMTE3, DMAC_DMAE),
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x6c0),
 };
 
 static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4",
-			 vectors_dma4, groups_dma4,
+			 vectors_dma4, NULL,
 			 NULL, prio_registers, NULL);
 #endif
 
 /* SH7750R and SH7751R both have 8-channel DMA controllers */
 #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
 static struct intc_vect vectors_dma8[] __initdata = {
-	INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
-	INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
-	INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0),
-	INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0),
-	INTC_VECT(DMAC_DMAE, 0x6c0),
-};
-
-static struct intc_group groups_dma8[] __initdata = {
-	INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
-		   DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5,
-		   DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE),
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+	INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
+	INTC_VECT(DMAC, 0x6c0),
 };
 
 static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8",
-			 vectors_dma8, groups_dma8,
+			 vectors_dma8, NULL,
 			 NULL, prio_registers, NULL);
 #endif
 
-- 
cgit v1.2.3


From a842fb2d11ee478dc2fd09b736b1bc62c386f18a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 24 Feb 2009 22:59:12 +0900
Subject: sh: multiple vectors per irq - sh7780

Update intc tables and platform data to use one linux irq
per maskable interrupt source instead of keeping the one-to-one
mapping between vectors and linux irqs.

This fixes potential irq masking issues for sh7780 hardware
blocks such as SCIF/RTC/DMAC/PCIC5/MMCIF/FLCTL/GPIO

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 97 +++++++++++-----------------------
 1 file changed, 30 insertions(+), 67 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index fb8200cc744..6f7227cd65b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -20,17 +20,7 @@ static struct resource rtc_resources[] = {
 		.flags	= IORESOURCE_IO,
 	},
 	[1] = {
-		/* Period IRQ */
-		.start	= 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= 22,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
+		/* Shared Period/Carry/Alarm IRQ */
 		.start	= 20,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -48,12 +38,12 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 40, 41, 43, 42 },
+		.irqs		= { 40, 40, 40, 40 },
 	}, {
 		.mapbase	= 0xffe10000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 76, 77, 79, 78 },
+		.irqs		= { 76, 76, 76, 76 },
 	}, {
 		.flags = 0,
 	}
@@ -90,82 +80,55 @@ enum {
 	IRL_HHLL, IRL_HHLH, IRL_HHHL,
 
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
-	RTC_ATI, RTC_PRI, RTC_CUI,
-	WDT,
-	TMU0, TMU1, TMU2, TMU2_TICPI,
-	HUDI,
-	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
-	DMAC0_DMINT4, DMAC0_DMINT5, DMAC1_DMINT6, DMAC1_DMINT7,
-	CMT, HAC,
-	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
-	PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
-	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
-	SIOF, HSPI,
-	MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
-	DMAC1_DMINT8, DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11,
-	TMU3, TMU4, TMU5,
-	SSI,
-	FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1,
-	GPIOI0, GPIOI1, GPIOI2, GPIOI3,
+	RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+	SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL,	GPIO,
 
 	/* interrupt groups */
 
-	RTC, TMU012, DMAC0, SCIF0, DMAC45, DMAC1,
-	PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO,
+	TMU012,	TMU345,
 };
 
 static struct intc_vect vectors[] __initdata = {
-	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
-	INTC_VECT(RTC_CUI, 0x4c0),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
 	INTC_VECT(WDT, 0x560),
 	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
 	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
 	INTC_VECT(HUDI, 0x600),
-	INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
-	INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0),
-	INTC_VECT(DMAC0_DMAE, 0x6c0),
-	INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
-	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
-	INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0),
-	INTC_VECT(DMAC1_DMINT6, 0x7c0), INTC_VECT(DMAC1_DMINT7, 0x7e0),
+	INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
+	INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
+	INTC_VECT(DMAC0, 0x6c0),
+	INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+	INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+	INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
+	INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0),
 	INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980),
 	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
 	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
-	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
-	INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
-	INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
-	INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0),
-	INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+	INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+	INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
+	INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
+	INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
 	INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80),
-	INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
-	INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
-	INTC_VECT(DMAC1_DMINT8, 0xd80), INTC_VECT(DMAC1_DMINT9, 0xda0),
-	INTC_VECT(DMAC1_DMINT10, 0xdc0), INTC_VECT(DMAC1_DMINT11, 0xde0),
+	INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+	INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+	INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0),
+	INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0),
 	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
 	INTC_VECT(TMU5, 0xe40),
 	INTC_VECT(SSI, 0xe80),
-	INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20),
-	INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60),
-	INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0),
-	INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
+	INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
+	INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
+	INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+	INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
 };
 
 static struct intc_group groups[] __initdata = {
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
 	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
-	INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
-		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
-	INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
-		   DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
-	INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
-	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
-	INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
 	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-	INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND,
-		   FLCTL_FLTRQ0, FLCTL_FLTRQ1),
-	INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
-- 
cgit v1.2.3


From 57e41c86e21c03941d17df29e0793fd04585d9ee Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 24 Feb 2009 22:59:19 +0900
Subject: sh: multiple vectors per irq - sh7785

Update intc tables and platform data to use one linux irq
per maskable interrupt source instead of keeping the one-to-one
mapping between vectors and linux irqs.

This fixes potential irq masking issues for sh7785 hardware
blocks such as SCIF/DMAC/PCIC5/MMCIF/GDTA/FLCTL/GPIO

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Tested-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 95 ++++++++++++----------------------
 1 file changed, 32 insertions(+), 63 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 30baa63b24c..d80802a49db 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -20,18 +20,13 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xffea0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 40, 41, 43, 42 },
+		.irqs		= { 40, 40, 40, 40 },
 	}, {
 		.mapbase	= 0xffeb0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 44, 45, 47, 46 },
-	},
-
-	/*
-	 * The rest of these all have multiplexed IRQs
-	 */
-	{
+		.irqs		= { 44, 44, 44, 44 },
+	}, {
 		.mapbase	= 0xffec0000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
@@ -91,33 +86,19 @@ enum {
 	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
 
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
-	WDT,
-	TMU0, TMU1, TMU2, TMU2_TICPI,
-	HUDI,
-	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
-	DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
-	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
-	DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
-	DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
-	HSPI,
+	WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI,
 	SCIF2, SCIF3, SCIF4, SCIF5,
-	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
-	PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
-	SIOF,
-	MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
-	DU,
-	GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+	SIOF, MMCIF, DU, GDTA,
 	TMU3, TMU4, TMU5,
 	SSI0, SSI1,
 	HAC0, HAC1,
-	FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1,
-	GPIOI0, GPIOI1, GPIOI2, GPIOI3,
+	FLCTL, GPIO,
 
 	/* interrupt groups */
 
-	TMU012, DMAC0, SCIF0, SCIF1, DMAC1,
-	PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO
+	TMU012,	TMU345
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -125,57 +106,45 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
 	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
 	INTC_VECT(HUDI, 0x600),
-	INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640),
-	INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680),
-	INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0),
-	INTC_VECT(DMAC0_DMAE, 0x6e0),
-	INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
-	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
-	INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
-	INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
-	INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0),
-	INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0),
-	INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920),
-	INTC_VECT(DMAC1_DMAE, 0x940),
+	INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640),
+	INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680),
+	INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0),
+	INTC_VECT(DMAC0, 0x6e0),
+	INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+	INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+	INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0),
+	INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0),
+	INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0),
+	INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0),
+	INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920),
+	INTC_VECT(DMAC1, 0x940),
 	INTC_VECT(HSPI, 0x960),
 	INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
 	INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
 	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
 	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
-	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
-	INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
-	INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+	INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+	INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
 	INTC_VECT(SIOF, 0xc00),
-	INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
-	INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
+	INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+	INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
 	INTC_VECT(DU, 0xd80),
-	INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0),
-	INTC_VECT(GDTA_GAERI, 0xde0),
+	INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0),
+	INTC_VECT(GDTA, 0xde0),
 	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
 	INTC_VECT(TMU5, 0xe40),
 	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
 	INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
-	INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20),
-	INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60),
-	INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0),
-	INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
+	INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
+	INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
+	INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+	INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
 };
 
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
-	INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
-		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
-	INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
-		   DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE),
-	INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
-	INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
-	INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI),
 	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-	INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND,
-		   FLCTL_FLTRQ0, FLCTL_FLTRQ1),
-	INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
-- 
cgit v1.2.3


From 0d5e19ab07cf61cb0794cfac4df0a1bd5d1e19d7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 27 Feb 2009 17:02:28 +0900
Subject: sh: Fix up SH-X3 general exception handler build.

With the recent entry.S refactoring, the SH-X3 path had a mov.l for a
register to register copy, resulting in:

  AS      arch/sh/kernel/cpu/sh4/../sh3/entry.o
arch/sh/kernel/cpu/sh4/../sh3/entry.S: Assembler messages:
arch/sh/kernel/cpu/sh4/../sh3/entry.S:366: Error: invalid operands for opcode
make[3]: *** [arch/sh/kernel/cpu/sh4/../sh3/entry.o] Error 1

Switch it over to a mov to fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index e984e94394e..c4829d6dee5 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -363,7 +363,7 @@ general_exception:
 
 	! Save registers / Switch to bank 0
 	bsr	save_regs	! needs original pr value in k3
-	 mov.l	k4, k2		! keep vector in k2
+	 mov	k4, k2		! keep vector in k2
 
 	bra	handle_exception_special
 	 nop
-- 
cgit v1.2.3


From c633c3cfcf41efe720020553aa3d4782fa0b9bd5 Mon Sep 17 00:00:00 2001
From: Jean-Christop PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Wed, 25 Feb 2009 04:20:40 +0100
Subject: [ARM] 5412/1: XSCALE: add ice dcc support

SCALE: add ice dcc support

Tested on the ixp425 with the ice PEEDI

Ack-by: Eric Miao <eric.miao@marvell.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig.debug          |  2 +-
 arch/arm/boot/compressed/head.S |  6 ++++++
 arch/arm/boot/compressed/misc.c | 15 +++++++++++++++
 arch/arm/kernel/debug.S         | 27 +++++++++++++++++++++++++++
 4 files changed, 49 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 35f8db35f44..a71fd941ade 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -77,7 +77,7 @@ config DEBUG_ICEDCC
 	  Say Y here if you want the debug print routines to direct their
 	  output to the EmbeddedICE macrocell's DCC channel using
 	  co-processor 14. This is known to work on the ARM9 style ICE
-	  channel.
+	  channel and on the XScale with the PEEDI.
 
 	  It does include a timeout to ensure that the system does not
 	  totally freeze when there is nothing connected to read.
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 77d614232d8..d1b678dc120 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,12 @@
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_XSCALE)
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+		mcr	p14, 0, \ch, c8, c0, 0
+		.endm
 #else
 		.macro	loadsp, rb
 		.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 3fc08413fff..393c8164131 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -46,6 +46,21 @@ static void icedcc_putc(int ch)
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+	} while (status & (1 << 28));
+
+	asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
 
 #else
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index f53c5829054..b121b6053cc 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,33 @@
 1002:
 		.endm
 
+#elif defined(CONFIG_CPU_XSCALE)
+
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c8, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		beq	1001b
+		.endm
+
+		.macro	waituart, rd, rx
+		mov	\rd, #0x10000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		bne	1001b
+1002:
+		.endm
+
 #else
 
 		.macro	addruart, rx
-- 
cgit v1.2.3


From 1c8daabe1dafc30fcc1d929e620269ffe99b6f8a Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 25 Feb 2009 22:22:38 +0100
Subject: [ARM] 5413/1: Add ep93xx dma m2p clocks

Add the clocks for ep93xx m2p dma engine.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 79 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 96049283a10..e8ebeaea6c4 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -41,6 +41,56 @@ static struct clk clk_usb_host = {
 	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
 };
 
+/* DMA Clocks */
+static struct clk clk_m2p0 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00020000,
+};
+static struct clk clk_m2p1 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00010000,
+};
+static struct clk clk_m2p2 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00080000,
+};
+static struct clk clk_m2p3 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00040000,
+};
+static struct clk clk_m2p4 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00200000,
+};
+static struct clk clk_m2p5 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00100000,
+};
+static struct clk clk_m2p6 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00800000,
+};
+static struct clk clk_m2p7 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x00400000,
+};
+static struct clk clk_m2p8 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x02000000,
+};
+static struct clk clk_m2p9 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x01000000,
+};
+static struct clk clk_m2m0 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x04000000,
+};
+static struct clk clk_m2m1 = {
+	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
+	.enable_mask	= 0x08000000,
+};
+
 #define INIT_CK(dev,con,ck)					\
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
@@ -54,6 +104,18 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL, "pclk", &clk_p),
 	INIT_CK(NULL, "pll2", &clk_pll2),
 	INIT_CK(NULL, "usb_host", &clk_usb_host),
+	INIT_CK(NULL, "m2p0", &clk_m2p0),
+	INIT_CK(NULL, "m2p1", &clk_m2p1),
+	INIT_CK(NULL, "m2p2", &clk_m2p2),
+	INIT_CK(NULL, "m2p3", &clk_m2p3),
+	INIT_CK(NULL, "m2p4", &clk_m2p4),
+	INIT_CK(NULL, "m2p5", &clk_m2p5),
+	INIT_CK(NULL, "m2p6", &clk_m2p6),
+	INIT_CK(NULL, "m2p7", &clk_m2p7),
+	INIT_CK(NULL, "m2p8", &clk_m2p8),
+	INIT_CK(NULL, "m2p9", &clk_m2p9),
+	INIT_CK(NULL, "m2m0", &clk_m2m0),
+	INIT_CK(NULL, "m2m1", &clk_m2m1),
 };
 
 
@@ -110,6 +172,22 @@ static unsigned long calc_pll_rate(u32 config_word)
 	return (unsigned long)rate;
 }
 
+static void __init ep93xx_dma_clock_init(void)
+{
+	clk_m2p0.rate = clk_h.rate;
+	clk_m2p1.rate = clk_h.rate;
+	clk_m2p2.rate = clk_h.rate;
+	clk_m2p3.rate = clk_h.rate;
+	clk_m2p4.rate = clk_h.rate;
+	clk_m2p5.rate = clk_h.rate;
+	clk_m2p6.rate = clk_h.rate;
+	clk_m2p7.rate = clk_h.rate;
+	clk_m2p8.rate = clk_h.rate;
+	clk_m2p9.rate = clk_h.rate;
+	clk_m2m0.rate = clk_h.rate;
+	clk_m2m1.rate = clk_h.rate;
+}
+
 static int __init ep93xx_clock_init(void)
 {
 	u32 value;
@@ -124,6 +202,7 @@ static int __init ep93xx_clock_init(void)
 	clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
 	clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
 	clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
+	ep93xx_dma_clock_init();
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-- 
cgit v1.2.3


From d09375a9ec80d8bae06196bb247460e0829d884c Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:52 -0300
Subject: x86, fixmap: rename __FIXADDR_SIZE and __FIXADDR_BOOT_SIZE

Impact: rename

Rename __FIXADDR_SIZE to FIXADDR_SIZE
and __FIXADDR_BOOT_SIZE to FIXADDR_BOOT_SIZE.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_32.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h
index 047d9bab2b3..d3fd0b92b4e 100644
--- a/arch/x86/include/asm/fixmap_32.h
+++ b/arch/x86/include/asm/fixmap_32.h
@@ -106,10 +106,10 @@ extern void reserve_top_address(unsigned long reserve);
 
 #define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
 
-#define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
-#define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
-#define FIXADDR_BOOT_START	(FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
+#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP - FIXADDR_BOOT_SIZE)
 
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_FIXMAP_32_H */
-- 
cgit v1.2.3


From ab93e3c45dbac66c2e8e24fd560c052a3907903e Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:53 -0300
Subject: x86, fixmap: define FIXADDR_BOOT_* and redefine FIX_ADDR_SIZE

Impact: new interface, not yet used

Now, with these macros, x86_64 code can know where start the
permanent and non-permanent fixed mapped address.
This patch make these macros equal fixmap_32.h for future
x86 integration.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_64.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 298d9ba3fae..d905de08675 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -69,8 +69,11 @@ enum fixed_addresses {
 };
 
 #define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
-#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP - FIXADDR_BOOT_SIZE)
 
 /* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
 #define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
-- 
cgit v1.2.3


From fd862dde18c3e360f510780e1d1bf615866b11c2 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:54 -0300
Subject: x86, fixmap: define reserve_top_address for x86_64

Impact: new interface (not yet use)

Define reserve_top_address for x86_64; only for later x86 integration.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_64.h |  2 ++
 arch/x86/mm/pgtable.c            | 18 ++++++++++++++++++
 arch/x86/mm/pgtable_32.c         | 16 ----------------
 3 files changed, 20 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index d905de08675..b6c06dd55f1 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -68,6 +68,8 @@ enum fixed_addresses {
 	__end_of_fixed_addresses
 };
 
+extern void reserve_top_address(unsigned long reserve);
+
 #define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
 
 #define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 86f2ffc43c3..5b7c7c8464f 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -313,6 +313,24 @@ int ptep_clear_flush_young(struct vm_area_struct *vma,
 	return young;
 }
 
+/**
+ * reserve_top_address - reserves a hole in the top of kernel address space
+ * @reserve - size of hole to reserve
+ *
+ * Can be used to relocate the fixmap area and poke a hole in the top
+ * of kernel address space to make room for a hypervisor.
+ */
+void __init reserve_top_address(unsigned long reserve)
+{
+#ifdef CONFIG_X86_32
+	BUG_ON(fixmaps_set > 0);
+	printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
+	       (int)-reserve);
+	__FIXADDR_TOP = -reserve - PAGE_SIZE;
+	__VMALLOC_RESERVE += reserve;
+#endif
+}
+
 int fixmaps_set;
 
 void __native_set_fixmap(enum fixed_addresses idx, pte_t pte)
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 0951db9ee51..c3cf6e11576 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -97,22 +97,6 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
 unsigned long __FIXADDR_TOP = 0xfffff000;
 EXPORT_SYMBOL(__FIXADDR_TOP);
 
-/**
- * reserve_top_address - reserves a hole in the top of kernel address space
- * @reserve - size of hole to reserve
- *
- * Can be used to relocate the fixmap area and poke a hole in the top
- * of kernel address space to make room for a hypervisor.
- */
-void __init reserve_top_address(unsigned long reserve)
-{
-	BUG_ON(fixmaps_set > 0);
-	printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
-	       (int)-reserve);
-	__FIXADDR_TOP = -reserve - PAGE_SIZE;
-	__VMALLOC_RESERVE += reserve;
-}
-
 /*
  * vmalloc=size forces the vmalloc area to be exactly 'size'
  * bytes. This can be used to increase (or decrease) the
-- 
cgit v1.2.3


From 2ae38daf25204b7c3725e053052f77469eff62cf Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:55 -0300
Subject: x86, fixmap: add CONFIG_X86_{LOCAL,IO}_APIC

Impact: New fixmap allocations

Add CONFIG_X86_{LOCAL,IO}_APIC to enum fixed_address.
FIX_APIC_BASE is used only when CONFIG_X86_LOCAL_APIC is
enabled and FIX_IO_APIC_BASE_* are used only when
CONFIG_X86_IO_APIC is enabled.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_64.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index b6c06dd55f1..7a518ec8263 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -40,9 +40,13 @@ enum fixed_addresses {
 	VSYSCALL_HPET,
 	FIX_DBGP_BASE,
 	FIX_EARLYCON_MEM_BASE,
+#ifdef CONFIG_X86_LOCAL_APIC
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+#endif
+#ifdef CONFIG_X86_IO_APIC
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
+#endif
 	FIX_EFI_IO_MAP_LAST_PAGE,
 	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
 				  + MAX_EFI_IO_PAGES - 1,
-- 
cgit v1.2.3


From 5f403fa9de5b3bb1309ec5f72b1e52e5b51321d4 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:56 -0300
Subject: x86, fixmap: add CONFIG_EFI

Impact: new fixmap allocation

FIX_EFI_IO_MAP_FIRST_PAGE is used only when EFI is enabled.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_64.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 7a518ec8263..baff6d0da99 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -16,7 +16,9 @@
 #include <asm/apicdef.h>
 #include <asm/page.h>
 #include <asm/vsyscall.h>
+#ifdef CONFIG_EFI
 #include <asm/efi.h>
+#endif
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -47,9 +49,11 @@ enum fixed_addresses {
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
 #endif
+#ifdef CONFIG_EFI
 	FIX_EFI_IO_MAP_LAST_PAGE,
 	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
 				  + MAX_EFI_IO_PAGES - 1,
+#endif
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
-- 
cgit v1.2.3


From e365bcd9214db993436de7bc915b76ab8402045f Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:57 -0300
Subject: x86, fixmap: prepare fixmap_64.h for unification

Impact: cleanup

Just prepare fixmap for later mechanic unification.
No real modification on code.

  text    data     bss     dec     hex filename
4312362  527192  421924 5261478  5048a6 vmlinux-64.after
4312362  527192  421924 5261478  5048a6 vmlinux-64.before

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_64.h | 76 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 69 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index baff6d0da99..95acae0daa5 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -6,25 +6,63 @@
  * for more details.
  *
  * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ * x86_32 and x86_64 integration by Gustavo F. Padovan, February 2009
  */
 
 #ifndef _ASM_X86_FIXMAP_64_H
 #define _ASM_X86_FIXMAP_64_H
 
+#ifndef __ASSEMBLY__
 #include <linux/kernel.h>
 #include <asm/acpi.h>
 #include <asm/apicdef.h>
 #include <asm/page.h>
+#ifdef CONFIG_X86_32
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#else
 #include <asm/vsyscall.h>
 #ifdef CONFIG_EFI
 #include <asm/efi.h>
 #endif
+#endif
+
+/*
+ * We can't declare FIXADDR_TOP as variable for x86_64 because vsyscall
+ * uses fixmaps that relies on FIXADDR_TOP for proper address calculation.
+ * Because of this, FIXADDR_TOP x86 integration was left as later work.
+ */
+#ifdef CONFIG_X86_32
+/* used by vmalloc.c, vsyscall.lds.S.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap.
+ */
+extern unsigned long __FIXADDR_TOP;
+#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+
+#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
+#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
+#else
+#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
+
+/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
+#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+#endif
 
 /*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at
  * compile time, but to set the physical address only
  * in the boot process.
+ * for x86_32: We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
  *
  * These 'compile-time allocated' memory buffers are
  * fixed-size 4k pages (or larger if used with an increment
@@ -34,12 +72,16 @@
  * TLB entries of such buffers will not be flushed across
  * task switches.
  */
-
 enum fixed_addresses {
+#ifdef CONFIG_X86_32
+	FIX_HOLE,
+	FIX_VDSO,
+#else
 	VSYSCALL_LAST_PAGE,
 	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
 			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
 	VSYSCALL_HPET,
+#endif
 	FIX_DBGP_BASE,
 	FIX_EARLYCON_MEM_BASE,
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -49,11 +91,32 @@ enum fixed_addresses {
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
 #endif
+#ifdef CONFIG_X86_64
 #ifdef CONFIG_EFI
 	FIX_EFI_IO_MAP_LAST_PAGE,
 	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
 				  + MAX_EFI_IO_PAGES - 1,
 #endif
+#endif
+#ifdef CONFIG_X86_VISWS_APIC
+	FIX_CO_CPU,	/* Cobalt timer */
+	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
+	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
+	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
+#endif
+#ifdef CONFIG_X86_F00F_BUG
+	FIX_F00F_IDT,	/* Virtual mapping for IDT */
+#endif
+#ifdef CONFIG_X86_CYCLONE_TIMER
+	FIX_CYCLONE_TIMER, /*cyclone timer register*/
+#endif
+#ifdef CONFIG_X86_32
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#ifdef CONFIG_PCI_MMCONFIG
+	FIX_PCIE_MCFG,
+#endif
+#endif
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
@@ -73,20 +136,19 @@ enum fixed_addresses {
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_X86_32
+	FIX_WP_TEST,
+#endif
 	__end_of_fixed_addresses
 };
 
-extern void reserve_top_address(unsigned long reserve);
 
-#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
+extern void reserve_top_address(unsigned long reserve);
 
 #define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
 #define FIXADDR_BOOT_START	(FIXADDR_TOP - FIXADDR_BOOT_SIZE)
 
-/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
-#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
-#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
-
+#endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_FIXMAP_64_H */
-- 
cgit v1.2.3


From c78f322ce8cea6052bc99513b57283d4d325a13e Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:58 -0300
Subject: x86, fixmap: prepare fixmap_32.h for unification

Impact: cleanup

Just prepare fixmap for later mechanic unification.
No real modification on code.

   text    data     bss     dec     hex filename
3831152  353188  372736 4557076  458914 vmlinux-32.after
3831152  353188  372736 4557076  458914 vmlinux-32.before

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap_32.h | 73 ++++++++++++++++++++++++++++++----------
 1 file changed, 56 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h
index d3fd0b92b4e..8384df78eee 100644
--- a/arch/x86/include/asm/fixmap_32.h
+++ b/arch/x86/include/asm/fixmap_32.h
@@ -8,50 +8,80 @@
  * Copyright (C) 1998 Ingo Molnar
  *
  * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ * x86_32 and x86_64 integration by Gustavo F. Padovan, February 2009
  */
 
 #ifndef _ASM_X86_FIXMAP_32_H
 #define _ASM_X86_FIXMAP_32_H
 
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#ifdef CONFIG_X86_32
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#else
+#include <asm/vsyscall.h>
+#ifdef CONFIG_EFI
+#include <asm/efi.h>
+#endif
+#endif
 
+/*
+ * We can't declare FIXADDR_TOP as variable for x86_64 because vsyscall
+ * uses fixmaps that relies on FIXADDR_TOP for proper address calculation.
+ * Because of this, FIXADDR_TOP x86 integration was left as later work.
+ */
+#ifdef CONFIG_X86_32
 /* used by vmalloc.c, vsyscall.lds.S.
  *
  * Leave one empty page between vmalloc'ed areas and
  * the start of the fixmap.
  */
 extern unsigned long __FIXADDR_TOP;
+#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+
 #define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
 #define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
+#else
+#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
 
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-#include <asm/acpi.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
+/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
+#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+#endif
 
 /*
  * Here we define all the compile-time 'special' virtual
  * addresses. The point is to have a constant address at
  * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
+ * in the boot process.
+ * for x86_32: We allocate these special addresses
  * from the end of virtual memory (0xfffff000) backwards.
  * Also this lets us do fail-safe vmalloc(), we
  * can guarantee that these special addresses and
  * vmalloc()-ed addresses never overlap.
  *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
+ * These 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages (or larger if used with an increment
+ * higher than 1). Use set_fixmap(idx,phys) to associate
  * physical memory with fixmap indices.
  *
  * TLB entries of such buffers will not be flushed across
  * task switches.
  */
 enum fixed_addresses {
+#ifdef CONFIG_X86_32
 	FIX_HOLE,
 	FIX_VDSO,
+#else
+	VSYSCALL_LAST_PAGE,
+	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
+			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+	VSYSCALL_HPET,
+#endif
 	FIX_DBGP_BASE,
 	FIX_EARLYCON_MEM_BASE,
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -59,7 +89,14 @@ enum fixed_addresses {
 #endif
 #ifdef CONFIG_X86_IO_APIC
 	FIX_IO_APIC_BASE_0,
-	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
+#endif
+#ifdef CONFIG_X86_64
+#ifdef CONFIG_EFI
+	FIX_EFI_IO_MAP_LAST_PAGE,
+	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
+				  + MAX_EFI_IO_PAGES - 1,
+#endif
 #endif
 #ifdef CONFIG_X86_VISWS_APIC
 	FIX_CO_CPU,	/* Cobalt timer */
@@ -73,15 +110,20 @@ enum fixed_addresses {
 #ifdef CONFIG_X86_CYCLONE_TIMER
 	FIX_CYCLONE_TIMER, /*cyclone timer register*/
 #endif
+#ifdef CONFIG_X86_32
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
 #ifdef CONFIG_PCI_MMCONFIG
 	FIX_PCIE_MCFG,
 #endif
+#endif
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
 	__end_of_permanent_fixed_addresses,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
@@ -94,17 +136,14 @@ enum fixed_addresses {
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_X86_32
 	FIX_WP_TEST,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
 #endif
 	__end_of_fixed_addresses
 };
 
-extern void reserve_top_address(unsigned long reserve);
-
 
-#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+extern void reserve_top_address(unsigned long reserve);
 
 #define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-- 
cgit v1.2.3


From c577b098f9bf467fb05dc279ba83604cb3f7cea0 Mon Sep 17 00:00:00 2001
From: "Gustavo F. Padovan" <gustavo@las.ic.unicamp.br>
Date: Sun, 15 Feb 2009 21:48:59 -0300
Subject: x86, fixmap: unify fixmap.h

Impact: unification

This patch unify fixmap_32.h and fixmap_64.h into fixmap.h.
Things that we can't merge now are using CONFIG_X86_{32,64}
(e.g.:vsyscall and EFI)

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/fixmap.h    | 149 ++++++++++++++++++++++++++++++++++++-
 arch/x86/include/asm/fixmap_32.h | 154 ---------------------------------------
 arch/x86/include/asm/fixmap_64.h | 154 ---------------------------------------
 3 files changed, 147 insertions(+), 310 deletions(-)
 delete mode 100644 arch/x86/include/asm/fixmap_32.h
 delete mode 100644 arch/x86/include/asm/fixmap_64.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 23696d44a0a..dca8f03da5b 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -1,11 +1,155 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ * x86_32 and x86_64 integration by Gustavo F. Padovan, February 2009
+ */
+
 #ifndef _ASM_X86_FIXMAP_H
 #define _ASM_X86_FIXMAP_H
 
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/acpi.h>
+#include <asm/apicdef.h>
+#include <asm/page.h>
+#ifdef CONFIG_X86_32
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#else
+#include <asm/vsyscall.h>
+#ifdef CONFIG_EFI
+#include <asm/efi.h>
+#endif
+#endif
+
+/*
+ * We can't declare FIXADDR_TOP as variable for x86_64 because vsyscall
+ * uses fixmaps that relies on FIXADDR_TOP for proper address calculation.
+ * Because of this, FIXADDR_TOP x86 integration was left as later work.
+ */
+#ifdef CONFIG_X86_32
+/* used by vmalloc.c, vsyscall.lds.S.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap.
+ */
+extern unsigned long __FIXADDR_TOP;
+#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
+
+#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
+#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
+#else
+#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
+
+/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
+#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+#endif
+
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process.
+ * for x86_32: We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * These 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages (or larger if used with an increment
+ * higher than 1). Use set_fixmap(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
 #ifdef CONFIG_X86_32
-# include "fixmap_32.h"
+	FIX_HOLE,
+	FIX_VDSO,
 #else
-# include "fixmap_64.h"
+	VSYSCALL_LAST_PAGE,
+	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
+			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+	VSYSCALL_HPET,
 #endif
+	FIX_DBGP_BASE,
+	FIX_EARLYCON_MEM_BASE,
+#ifdef CONFIG_X86_LOCAL_APIC
+	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	FIX_IO_APIC_BASE_0,
+	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
+#endif
+#ifdef CONFIG_X86_64
+#ifdef CONFIG_EFI
+	FIX_EFI_IO_MAP_LAST_PAGE,
+	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
+				  + MAX_EFI_IO_PAGES - 1,
+#endif
+#endif
+#ifdef CONFIG_X86_VISWS_APIC
+	FIX_CO_CPU,	/* Cobalt timer */
+	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
+	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
+	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
+#endif
+#ifdef CONFIG_X86_F00F_BUG
+	FIX_F00F_IDT,	/* Virtual mapping for IDT */
+#endif
+#ifdef CONFIG_X86_CYCLONE_TIMER
+	FIX_CYCLONE_TIMER, /*cyclone timer register*/
+#endif
+#ifdef CONFIG_X86_32
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#ifdef CONFIG_PCI_MMCONFIG
+	FIX_PCIE_MCFG,
+#endif
+#endif
+#ifdef CONFIG_PARAVIRT
+	FIX_PARAVIRT_BOOTMAP,
+#endif
+	__end_of_permanent_fixed_addresses,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
+	/*
+	 * 256 temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 *
+	 * We round it up to the next 256 pages boundary so that we
+	 * can have a single pgd entry and a single pte table:
+	 */
+#define NR_FIX_BTMAPS		64
+#define FIX_BTMAPS_SLOTS	4
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
+			(__end_of_permanent_fixed_addresses & 255),
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_X86_32
+	FIX_WP_TEST,
+#endif
+	__end_of_fixed_addresses
+};
+
+
+extern void reserve_top_address(unsigned long reserve);
+
+#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP - FIXADDR_BOOT_SIZE)
 
 extern int fixmaps_set;
 
@@ -69,4 +213,5 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
 	return __virt_to_fix(vaddr);
 }
+#endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_FIXMAP_H */
diff --git a/arch/x86/include/asm/fixmap_32.h b/arch/x86/include/asm/fixmap_32.h
deleted file mode 100644
index 8384df78eee..00000000000
--- a/arch/x86/include/asm/fixmap_32.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- * x86_32 and x86_64 integration by Gustavo F. Padovan, February 2009
- */
-
-#ifndef _ASM_X86_FIXMAP_32_H
-#define _ASM_X86_FIXMAP_32_H
-
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-#include <asm/acpi.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#ifdef CONFIG_X86_32
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#else
-#include <asm/vsyscall.h>
-#ifdef CONFIG_EFI
-#include <asm/efi.h>
-#endif
-#endif
-
-/*
- * We can't declare FIXADDR_TOP as variable for x86_64 because vsyscall
- * uses fixmaps that relies on FIXADDR_TOP for proper address calculation.
- * Because of this, FIXADDR_TOP x86 integration was left as later work.
- */
-#ifdef CONFIG_X86_32
-/* used by vmalloc.c, vsyscall.lds.S.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap.
- */
-extern unsigned long __FIXADDR_TOP;
-#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
-
-#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
-#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
-#else
-#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
-
-/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
-#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
-#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process.
- * for x86_32: We allocate these special addresses
- * from the end of virtual memory (0xfffff000) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * These 'compile-time allocated' memory buffers are
- * fixed-size 4k pages (or larger if used with an increment
- * higher than 1). Use set_fixmap(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-enum fixed_addresses {
-#ifdef CONFIG_X86_32
-	FIX_HOLE,
-	FIX_VDSO,
-#else
-	VSYSCALL_LAST_PAGE,
-	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
-			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
-	VSYSCALL_HPET,
-#endif
-	FIX_DBGP_BASE,
-	FIX_EARLYCON_MEM_BASE,
-#ifdef CONFIG_X86_LOCAL_APIC
-	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
-#endif
-#ifdef CONFIG_X86_IO_APIC
-	FIX_IO_APIC_BASE_0,
-	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
-#endif
-#ifdef CONFIG_X86_64
-#ifdef CONFIG_EFI
-	FIX_EFI_IO_MAP_LAST_PAGE,
-	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
-				  + MAX_EFI_IO_PAGES - 1,
-#endif
-#endif
-#ifdef CONFIG_X86_VISWS_APIC
-	FIX_CO_CPU,	/* Cobalt timer */
-	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
-	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
-	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
-#endif
-#ifdef CONFIG_X86_F00F_BUG
-	FIX_F00F_IDT,	/* Virtual mapping for IDT */
-#endif
-#ifdef CONFIG_X86_CYCLONE_TIMER
-	FIX_CYCLONE_TIMER, /*cyclone timer register*/
-#endif
-#ifdef CONFIG_X86_32
-	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#ifdef CONFIG_PCI_MMCONFIG
-	FIX_PCIE_MCFG,
-#endif
-#endif
-#ifdef CONFIG_PARAVIRT
-	FIX_PARAVIRT_BOOTMAP,
-#endif
-	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
-	/*
-	 * 256 temporary boot-time mappings, used by early_ioremap(),
-	 * before ioremap() is functional.
-	 *
-	 * We round it up to the next 256 pages boundary so that we
-	 * can have a single pgd entry and a single pte table:
-	 */
-#define NR_FIX_BTMAPS		64
-#define FIX_BTMAPS_SLOTS	4
-	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
-			(__end_of_permanent_fixed_addresses & 255),
-	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
-#ifdef CONFIG_X86_32
-	FIX_WP_TEST,
-#endif
-	__end_of_fixed_addresses
-};
-
-
-extern void reserve_top_address(unsigned long reserve);
-
-#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
-#define FIXADDR_BOOT_START	(FIXADDR_TOP - FIXADDR_BOOT_SIZE)
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_X86_FIXMAP_32_H */
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
deleted file mode 100644
index 95acae0daa5..00000000000
--- a/arch/x86/include/asm/fixmap_64.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- * x86_32 and x86_64 integration by Gustavo F. Padovan, February 2009
- */
-
-#ifndef _ASM_X86_FIXMAP_64_H
-#define _ASM_X86_FIXMAP_64_H
-
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-#include <asm/acpi.h>
-#include <asm/apicdef.h>
-#include <asm/page.h>
-#ifdef CONFIG_X86_32
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#else
-#include <asm/vsyscall.h>
-#ifdef CONFIG_EFI
-#include <asm/efi.h>
-#endif
-#endif
-
-/*
- * We can't declare FIXADDR_TOP as variable for x86_64 because vsyscall
- * uses fixmaps that relies on FIXADDR_TOP for proper address calculation.
- * Because of this, FIXADDR_TOP x86 integration was left as later work.
- */
-#ifdef CONFIG_X86_32
-/* used by vmalloc.c, vsyscall.lds.S.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap.
- */
-extern unsigned long __FIXADDR_TOP;
-#define FIXADDR_TOP	((unsigned long)__FIXADDR_TOP)
-
-#define FIXADDR_USER_START     __fix_to_virt(FIX_VDSO)
-#define FIXADDR_USER_END       __fix_to_virt(FIX_VDSO - 1)
-#else
-#define FIXADDR_TOP	(VSYSCALL_END-PAGE_SIZE)
-
-/* Only covers 32bit vsyscalls currently. Need another set for 64bit. */
-#define FIXADDR_USER_START	((unsigned long)VSYSCALL32_VSYSCALL)
-#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process.
- * for x86_32: We allocate these special addresses
- * from the end of virtual memory (0xfffff000) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * These 'compile-time allocated' memory buffers are
- * fixed-size 4k pages (or larger if used with an increment
- * higher than 1). Use set_fixmap(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-enum fixed_addresses {
-#ifdef CONFIG_X86_32
-	FIX_HOLE,
-	FIX_VDSO,
-#else
-	VSYSCALL_LAST_PAGE,
-	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
-			    + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
-	VSYSCALL_HPET,
-#endif
-	FIX_DBGP_BASE,
-	FIX_EARLYCON_MEM_BASE,
-#ifdef CONFIG_X86_LOCAL_APIC
-	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
-#endif
-#ifdef CONFIG_X86_IO_APIC
-	FIX_IO_APIC_BASE_0,
-	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
-#endif
-#ifdef CONFIG_X86_64
-#ifdef CONFIG_EFI
-	FIX_EFI_IO_MAP_LAST_PAGE,
-	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
-				  + MAX_EFI_IO_PAGES - 1,
-#endif
-#endif
-#ifdef CONFIG_X86_VISWS_APIC
-	FIX_CO_CPU,	/* Cobalt timer */
-	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
-	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
-	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
-#endif
-#ifdef CONFIG_X86_F00F_BUG
-	FIX_F00F_IDT,	/* Virtual mapping for IDT */
-#endif
-#ifdef CONFIG_X86_CYCLONE_TIMER
-	FIX_CYCLONE_TIMER, /*cyclone timer register*/
-#endif
-#ifdef CONFIG_X86_32
-	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#ifdef CONFIG_PCI_MMCONFIG
-	FIX_PCIE_MCFG,
-#endif
-#endif
-#ifdef CONFIG_PARAVIRT
-	FIX_PARAVIRT_BOOTMAP,
-#endif
-	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
-	/*
-	 * 256 temporary boot-time mappings, used by early_ioremap(),
-	 * before ioremap() is functional.
-	 *
-	 * We round it up to the next 256 pages boundary so that we
-	 * can have a single pgd entry and a single pte table:
-	 */
-#define NR_FIX_BTMAPS		64
-#define FIX_BTMAPS_SLOTS	4
-	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
-			(__end_of_permanent_fixed_addresses & 255),
-	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
-#ifdef CONFIG_X86_32
-	FIX_WP_TEST,
-#endif
-	__end_of_fixed_addresses
-};
-
-
-extern void reserve_top_address(unsigned long reserve);
-
-#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
-#define FIXADDR_BOOT_START	(FIXADDR_TOP - FIXADDR_BOOT_SIZE)
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_X86_FIXMAP_64_H */
-- 
cgit v1.2.3


From 144b0712dd9dd9ebd4e80c4e5388c9f6afc2b497 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 27 Feb 2009 10:27:04 -0800
Subject: x86: signal: add __user annotation

Impact: cleanup

Add missing __user annotation to the parameter of get_sigframe().
Also change cast type to void __user * of *fpstate.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 7cdcd16885e..e89eaf417e5 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -215,7 +215,7 @@ static const struct {
  */
 static inline void __user *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
-	     void **fpstate)
+	     void __user **fpstate)
 {
 	unsigned long sp;
 
@@ -243,7 +243,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 
 	if (used_math()) {
 		sp = sp - sig_xstate_size;
-		*fpstate = (struct _fpstate *) sp;
+		*fpstate = (void __user *) sp;
 		if (save_i387_xstate(*fpstate) < 0)
 			return (void __user *)-1L;
 	}
-- 
cgit v1.2.3


From 97286a2b64725aac2d584ddd1f94871f9991d5a1 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 27 Feb 2009 10:28:48 -0800
Subject: x86: signal: intrroduce get_sigframe() and replace get_sigstack()

Impact: cleanup

Introduce get_sigframe() like 32-bit to replace get_sigstack().
Move the i387 stuff into get_sigframe().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index e89eaf417e5..82d37c77b0f 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -392,10 +392,13 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
  * Determine which stack to use..
  */
 static void __user *
-get_stack(struct k_sigaction *ka, unsigned long sp, unsigned long size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
+	     void __user **fpstate)
 {
-	/* Default to using normal stack - redzone*/
-	sp -= 128;
+	unsigned long sp;
+
+	/* Default to using normal stack - redzone */
+	sp = regs->sp - 128;
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
@@ -403,7 +406,18 @@ get_stack(struct k_sigaction *ka, unsigned long sp, unsigned long size)
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
-	return (void __user *)round_down(sp - size, 64);
+	if (used_math()) {
+		sp -= sig_xstate_size;
+		*fpstate = (void __user *)round_down(sp, 64);
+		if (save_i387_xstate(*fpstate) < 0)
+			return (void __user *) -1L;
+
+		sp -= frame_size;
+		return (void __user *)round_down(sp, 16) - 8;
+	}
+
+	sp -= frame_size;
+	return (void __user *)round_down(sp, 64) - 8;
 }
 
 static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
@@ -414,15 +428,7 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	int err = 0;
 	struct task_struct *me = current;
 
-	if (used_math()) {
-		fp = get_stack(ka, regs->sp, sig_xstate_size);
-		frame = (void __user *)round_down(
-			(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
-
-		if (save_i387_xstate(fp) < 0)
-			return -EFAULT;
-	} else
-		frame = get_stack(ka, regs->sp, sizeof(struct rt_sigframe)) - 8;
+	frame = get_sigframe(ka, regs, sizeof(struct rt_sigframe), &fp);
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
-- 
cgit v1.2.3


From 36a4526583ad61fe7cb7432f53bce52ea198813a Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 27 Feb 2009 10:29:09 -0800
Subject: x86: signal: use 16 bytes boundary for rt_sigframe

Impact: cleanup

Supporting xsave/xrestore introduces 64 bytes boundary for save_i387_xstate().
16 bytes boundary is OK for rt_sigframe.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 82d37c77b0f..89ef90df985 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -409,15 +409,13 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	if (used_math()) {
 		sp -= sig_xstate_size;
 		*fpstate = (void __user *)round_down(sp, 64);
+
 		if (save_i387_xstate(*fpstate) < 0)
 			return (void __user *) -1L;
-
-		sp -= frame_size;
-		return (void __user *)round_down(sp, 16) - 8;
 	}
 
 	sp -= frame_size;
-	return (void __user *)round_down(sp, 64) - 8;
+	return (void __user *)round_down(sp, 16) - 8;
 }
 
 static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-- 
cgit v1.2.3


From 75779f05264b9968d7ae7ecb4ca5127b08785692 Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 27 Feb 2009 10:29:57 -0800
Subject: x86: signal: unify get_sigframe()

Impact: cleanup

Unify get_sigframe().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal.c | 97 ++++++++++++++++++++----------------------------
 1 file changed, 41 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 89ef90df985..53425c681f2 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -187,28 +187,6 @@ setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 /*
  * Set up a signal frame.
  */
-#ifdef CONFIG_X86_32
-static const struct {
-	u16 poplmovl;
-	u32 val;
-	u16 int80;
-} __attribute__((packed)) retcode = {
-	0xb858,		/* popl %eax; movl $..., %eax */
-	__NR_sigreturn,
-	0x80cd,		/* int $0x80 */
-};
-
-static const struct {
-	u8  movl;
-	u32 val;
-	u16 int80;
-	u8  pad;
-} __attribute__((packed)) rt_retcode = {
-	0xb8,		/* movl $..., %eax */
-	__NR_rt_sigreturn,
-	0x80cd,		/* int $0x80 */
-	0
-};
 
 /*
  * Determine which stack to use..
@@ -217,10 +195,13 @@ static inline void __user *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	     void __user **fpstate)
 {
-	unsigned long sp;
-
 	/* Default to using normal stack */
-	sp = regs->sp;
+	unsigned long sp = regs->sp;
+
+#ifdef CONFIG_X86_64
+	/* redzone */
+	sp -= 128;
+#endif /* CONFIG_X86_64 */
 
 	/*
 	 * If we are on the alternate signal stack and would overflow it, don't.
@@ -234,30 +215,64 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 		if (sas_ss_flags(sp) == 0)
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	} else {
+#ifdef CONFIG_X86_32
 		/* This is the legacy signal stack switching. */
 		if ((regs->ss & 0xffff) != __USER_DS &&
 			!(ka->sa.sa_flags & SA_RESTORER) &&
 				ka->sa.sa_restorer)
 			sp = (unsigned long) ka->sa.sa_restorer;
+#endif /* CONFIG_X86_32 */
 	}
 
 	if (used_math()) {
-		sp = sp - sig_xstate_size;
+		sp -= sig_xstate_size;
+#ifdef CONFIG_X86_32
 		*fpstate = (void __user *) sp;
+#else /* !CONFIG_X86_32 */
+		*fpstate = (void __user *)round_down(sp, 64);
+#endif /* CONFIG_X86_32 */
+
 		if (save_i387_xstate(*fpstate) < 0)
 			return (void __user *)-1L;
 	}
 
 	sp -= frame_size;
+#ifdef CONFIG_X86_32
 	/*
 	 * Align the stack pointer according to the i386 ABI,
 	 * i.e. so that on function entry ((sp + 4) & 15) == 0.
 	 */
 	sp = ((sp + 4) & -16ul) - 4;
+#else /* !CONFIG_X86_32 */
+	sp = round_down(sp, 16) - 8;
+#endif
 
 	return (void __user *) sp;
 }
 
+#ifdef CONFIG_X86_32
+static const struct {
+	u16 poplmovl;
+	u32 val;
+	u16 int80;
+} __attribute__((packed)) retcode = {
+	0xb858,		/* popl %eax; movl $..., %eax */
+	__NR_sigreturn,
+	0x80cd,		/* int $0x80 */
+};
+
+static const struct {
+	u8  movl;
+	u32 val;
+	u16 int80;
+	u8  pad;
+} __attribute__((packed)) rt_retcode = {
+	0xb8,		/* movl $..., %eax */
+	__NR_rt_sigreturn,
+	0x80cd,		/* int $0x80 */
+	0
+};
+
 static int
 __setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	      struct pt_regs *regs)
@@ -388,36 +403,6 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return 0;
 }
 #else /* !CONFIG_X86_32 */
-/*
- * Determine which stack to use..
- */
-static void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
-	     void __user **fpstate)
-{
-	unsigned long sp;
-
-	/* Default to using normal stack - redzone */
-	sp = regs->sp - 128;
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (sas_ss_flags(sp) == 0)
-			sp = current->sas_ss_sp + current->sas_ss_size;
-	}
-
-	if (used_math()) {
-		sp -= sig_xstate_size;
-		*fpstate = (void __user *)round_down(sp, 64);
-
-		if (save_i387_xstate(*fpstate) < 0)
-			return (void __user *) -1L;
-	}
-
-	sp -= frame_size;
-	return (void __user *)round_down(sp, 16) - 8;
-}
-
 static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			    sigset_t *set, struct pt_regs *regs)
 {
-- 
cgit v1.2.3


From 1fae0279ce4811fa123001515d1ed3d68c1d557f Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Fri, 27 Feb 2009 10:30:32 -0800
Subject: x86: signal: introduce helper align_sigframe()

Impact: cleanup

Introduce helper align_sigframe() to align stack pointer for signal frame.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 53425c681f2..dde3f2ae237 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -191,6 +191,20 @@ setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 /*
  * Determine which stack to use..
  */
+static unsigned long align_sigframe(unsigned long sp)
+{
+#ifdef CONFIG_X86_32
+	/*
+	 * Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0.
+	 */
+	sp = ((sp + 4) & -16ul) - 4;
+#else /* !CONFIG_X86_32 */
+	sp = round_down(sp, 16) - 8;
+#endif
+	return sp;
+}
+
 static inline void __user *
 get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 	     void __user **fpstate)
@@ -236,18 +250,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 			return (void __user *)-1L;
 	}
 
-	sp -= frame_size;
-#ifdef CONFIG_X86_32
-	/*
-	 * Align the stack pointer according to the i386 ABI,
-	 * i.e. so that on function entry ((sp + 4) & 15) == 0.
-	 */
-	sp = ((sp + 4) & -16ul) - 4;
-#else /* !CONFIG_X86_32 */
-	sp = round_down(sp, 16) - 8;
-#endif
-
-	return (void __user *) sp;
+	return (void __user *)align_sigframe(sp - frame_size);
 }
 
 #ifdef CONFIG_X86_32
-- 
cgit v1.2.3


From 327f4387e39cf7bfe79a673e56dbf5479db3fec9 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sat, 28 Feb 2009 18:50:21 +0530
Subject: x86: remove double copy of show_cpuinfo_core for 32 and 64 bit

Impact: unification

show_cpuinfo_core is identical for 32 and 64 bit and can be unified,
and CONFIG_X86_HT inherently depends on CONFIG_X86_SMP.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/proc.c | 20 ++------------------
 1 file changed, 2 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 01b1244ef1c..d67e0e48bc2 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -7,11 +7,10 @@
 /*
  *	Get CPU information for use by the procfs.
  */
-#ifdef CONFIG_X86_32
 static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
 			      unsigned int cpu)
 {
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 	if (c->x86_max_cores * smp_num_siblings > 1) {
 		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
 		seq_printf(m, "siblings\t: %d\n",
@@ -24,6 +23,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
 #endif
 }
 
+#ifdef CONFIG_X86_32
 static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 {
 	/*
@@ -50,22 +50,6 @@ static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 		   c->wp_works_ok ? "yes" : "no");
 }
 #else
-static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
-			      unsigned int cpu)
-{
-#ifdef CONFIG_SMP
-	if (c->x86_max_cores * smp_num_siblings > 1) {
-		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
-		seq_printf(m, "siblings\t: %d\n",
-			   cpus_weight(per_cpu(cpu_core_map, cpu)));
-		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
-		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
-		seq_printf(m, "apicid\t\t: %d\n", c->apicid);
-		seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
-	}
-#endif
-}
-
 static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
 {
 	seq_printf(m,
-- 
cgit v1.2.3


From af6326d72c95d6e0bbc88c92185c654f57acef3b Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 1 Mar 2009 16:03:16 +0900
Subject: alpha: fix typo in recent early vmalloc change

Impact: fix build

Add missing 'o' in variable name.  Compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
---
 arch/alpha/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 91eddd8505d..af71d38c8e4 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -202,7 +202,7 @@ callback_init(void * kernel_end)
 		console_remap_vm.size = nr_pages << PAGE_SHIFT;
 		vm_area_register_early(&console_remap_vm, PAGE_SIZE);
 
-		vaddr = (unsigned long)consle_remap_vm.addr;
+		vaddr = (unsigned long)console_remap_vm.addr;
 
 		/* Set up the third level PTEs and update the virtual
 		   addresses of the CRB entries.  */
-- 
cgit v1.2.3


From d0c4f570276cb4d2dc4215b90eb7cb6e2bdd4a15 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 1 Mar 2009 16:06:56 +0900
Subject: bootmem, x86: further fixes for arch-specific bootmem wrapping

Impact: fix new breakages introduced by previous fix

Commit c132937556f56ee4b831ef4b23f1846e05fde102 tried to clean up
bootmem arch wrapper but it wasn't quite correct.  Before the commit,
the followings were broken.

* Low level interface functions prefixed with __ ignored arch
  preference.

* reserve_bootmem(...) can't be mapped into
  reserve_bootmem_node(NODE_DATA(0)->bdata, ...) because the node is
  not preference here.  The region specified MUST fall into the
  specified region; otherwise, it will panic.

After the commit,

* If allocation fails for the arch preferred node, it should fallback
  to whatever is available.  Instead, it simply failed allocation.

There are too many internal details to allow generic wrapping and
still keep things simple for archs.  Plus, all that arch wants is a
way to prefer certain node over another.

This patch drops the generic wrapping around alloc_bootmem_core() and
add alloc_bootmem_core() instead.  If necessary, arch can define
bootmem_arch_referred_node() macro or function which takes all
allocation information and returns the preferred node.  bootmem
generic code will always try the preferred node first and then
fallback to other nodes as usual.

Breakages noted and changes reviewed by Johannes Weiner.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
---
 arch/x86/include/asm/mmzone_32.h | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index eeacf67de49..ede6998bd92 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -92,12 +92,8 @@ static inline int pfn_valid(int pfn)
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
 /* always use node 0 for bootmem on this numa platform */
-#define alloc_bootmem_core(__bdata, size, align, goal, limit)		\
-({									\
-	bootmem_data_t __maybe_unused *	__abm_bdata_dummy = (__bdata);	\
-	__alloc_bootmem_core(NODE_DATA(0)->bdata,			\
-			     (size), (align), (goal), (limit));		\
-})
+#define bootmem_arch_preferred_node(__bdata, size, align, goal, limit)	\
+	(NODE_DATA(0)->bdata)
 #endif /* CONFIG_NEED_MULTIPLE_NODES */
 
 #endif /* _ASM_X86_MMZONE_32_H */
-- 
cgit v1.2.3


From f5c1aa1537be39d8b9bb5279b5881d81898fd3cd Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 1 Mar 2009 12:32:08 +0100
Subject: Revert "gpu/drm, x86, PAT: PAT support for io_mapping_*"

This reverts commit 17581ad812a9abb0182260374ef2e52d4a808a64.

Sitsofe Wheeler reported that /dev/dri/card0 is MIA on his EeePC 900
and bisected it to this commit.

Graphics card is an i915 in an EeePC 900:

 00:02.0 VGA compatible controller [0300]:
   Intel Corporation Mobile 915GM/GMS/910GML
     Express Graphics Controller [8086:2592] (rev 04)

( Most likely the ioremap() of the driver failed and hence the card
  did not initialize. )

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Bisected-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/iomap.h |  5 +----
 arch/x86/mm/iomap_32.c       | 44 ++------------------------------------------
 2 files changed, 3 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index bd46495ff7d..86af26091d6 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -24,10 +24,7 @@
 #include <asm/tlbflush.h>
 
 int
-reserve_io_memtype_wc(u64 base, unsigned long size, pgprot_t *prot);
-
-void
-free_io_memtype(u64 base, unsigned long size);
+is_io_mapping_possible(resource_size_t base, unsigned long size);
 
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index d5e28424622..6c2b1af1692 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -21,13 +21,13 @@
 #include <linux/module.h>
 
 #ifdef CONFIG_X86_PAE
-static int
+int
 is_io_mapping_possible(resource_size_t base, unsigned long size)
 {
 	return 1;
 }
 #else
-static int
+int
 is_io_mapping_possible(resource_size_t base, unsigned long size)
 {
 	/* There is no way to map greater than 1 << 32 address without PAE */
@@ -38,46 +38,6 @@ is_io_mapping_possible(resource_size_t base, unsigned long size)
 }
 #endif
 
-int
-reserve_io_memtype_wc(u64 base, unsigned long size, pgprot_t *prot)
-{
-	unsigned long ret_flag;
-
-	if (!is_io_mapping_possible(base, size))
-		goto out_err;
-
-	if (!pat_enabled) {
-		*prot = pgprot_noncached(PAGE_KERNEL);
-		return 0;
-	}
-
-	if (reserve_memtype(base, base + size, _PAGE_CACHE_WC, &ret_flag))
-		goto out_err;
-
-	if (ret_flag == _PAGE_CACHE_WB)
-		goto out_free;
-
-	if (kernel_map_sync_memtype(base, size, ret_flag))
-		goto out_free;
-
-	*prot = __pgprot(__PAGE_KERNEL | ret_flag);
-	return 0;
-
-out_free:
-	free_memtype(base, base + size);
-out_err:
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(reserve_io_memtype_wc);
-
-void
-free_io_memtype(u64 base, unsigned long size)
-{
-	if (pat_enabled)
-		free_memtype(base, base + size);
-}
-EXPORT_SYMBOL_GPL(free_io_memtype);
-
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
  */
 void *
-- 
cgit v1.2.3


From f180053694b43d5714bf56cb95499a3c32ff155c Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 2 Mar 2009 11:00:57 +0100
Subject: x86, mm: dont use non-temporal stores in pagecache accesses

Impact: standardize IO on cached ops

On modern CPUs it is almost always a bad idea to use non-temporal stores,
as the regression in this commit has shown it:

  30d697f: x86: fix performance regression in write() syscall

The kernel simply has no good information about whether using non-temporal
stores is a good idea or not - and trying to add heuristics only increases
complexity and inserts fragility.

The regression on cached write()s took very long to be found - over two
years. So dont take any chances and let the hardware decide how it makes
use of its caches.

The only exception is drivers/gpu/drm/i915/i915_gem.c: there were we are
absolutely sure that another entity (the GPU) will pick up the dirty
data immediately and that the CPU will not touch that data before the
GPU will.

Also, keep the _nocache() primitives to make it easier for people to
experiment with these details. There may be more clear-cut cases where
non-cached copies can be used, outside of filemap.c.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess_32.h |  4 ++--
 arch/x86/include/asm/uaccess_64.h | 25 +++++++------------------
 2 files changed, 9 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index a0ba6138697..5e06259e90e 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -157,7 +157,7 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 }
 
 static __always_inline unsigned long __copy_from_user_nocache(void *to,
-		const void __user *from, unsigned long n, unsigned long total)
+				const void __user *from, unsigned long n)
 {
 	might_fault();
 	if (__builtin_constant_p(n)) {
@@ -180,7 +180,7 @@ static __always_inline unsigned long __copy_from_user_nocache(void *to,
 
 static __always_inline unsigned long
 __copy_from_user_inatomic_nocache(void *to, const void __user *from,
-				  unsigned long n, unsigned long total)
+				  unsigned long n)
 {
        return __copy_from_user_ll_nocache_nozero(to, from, n);
 }
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index dcaa0404cf7..8cc687326eb 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -188,29 +188,18 @@ __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
 extern long __copy_user_nocache(void *dst, const void __user *src,
 				unsigned size, int zerorest);
 
-static inline int __copy_from_user_nocache(void *dst, const void __user *src,
-				   unsigned size, unsigned long total)
+static inline int
+__copy_from_user_nocache(void *dst, const void __user *src, unsigned size)
 {
 	might_sleep();
-	/*
-	 * In practice this limit means that large file write()s
-	 * which get chunked to 4K copies get handled via
-	 * non-temporal stores here. Smaller writes get handled
-	 * via regular __copy_from_user():
-	 */
-	if (likely(total >= PAGE_SIZE))
-		return __copy_user_nocache(dst, src, size, 1);
-	else
-		return __copy_from_user(dst, src, size);
+	return __copy_user_nocache(dst, src, size, 1);
 }
 
-static inline int __copy_from_user_inatomic_nocache(void *dst,
-	    const void __user *src, unsigned size, unsigned total)
+static inline int
+__copy_from_user_inatomic_nocache(void *dst, const void __user *src,
+				  unsigned size)
 {
-	if (likely(total >= PAGE_SIZE))
-		return __copy_user_nocache(dst, src, size, 0);
-	else
-		return __copy_from_user_inatomic(dst, src, size);
+	return __copy_user_nocache(dst, src, size, 0);
 }
 
 unsigned long
-- 
cgit v1.2.3


From 9694cd6c17582cd6c29bf4a4e4aa767862ff4f4c Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 10:53:55 +0100
Subject: x86_32: apic/bigsmp_32, de-inline functions

The ones which go only into struct apic are de-inlined
by compiler anyway, so remove the inline specifier from them.

Afterwards, remove bigsmp_setup_portio_remap completely as it
is unused.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/bigsmp_32.c | 40 +++++++++++++++++-----------------------
 1 file changed, 17 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 69c512e23a9..d806ecaa948 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -16,17 +16,17 @@
 #include <asm/apic.h>
 #include <asm/ipi.h>
 
-static inline unsigned bigsmp_get_apic_id(unsigned long x)
+static unsigned bigsmp_get_apic_id(unsigned long x)
 {
 	return (x >> 24) & 0xFF;
 }
 
-static inline int bigsmp_apic_id_registered(void)
+static int bigsmp_apic_id_registered(void)
 {
 	return 1;
 }
 
-static inline const cpumask_t *bigsmp_target_cpus(void)
+static const cpumask_t *bigsmp_target_cpus(void)
 {
 #ifdef CONFIG_SMP
 	return &cpu_online_map;
@@ -35,13 +35,12 @@ static inline const cpumask_t *bigsmp_target_cpus(void)
 #endif
 }
 
-static inline unsigned long
-bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
 {
 	return 0;
 }
 
-static inline unsigned long bigsmp_check_apicid_present(int bit)
+static unsigned long bigsmp_check_apicid_present(int bit)
 {
 	return 1;
 }
@@ -64,7 +63,7 @@ static inline unsigned long calculate_ldr(int cpu)
  * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  * document number 292116).  So here it goes...
  */
-static inline void bigsmp_init_apic_ldr(void)
+static void bigsmp_init_apic_ldr(void)
 {
 	unsigned long val;
 	int cpu = smp_processor_id();
@@ -74,19 +73,19 @@ static inline void bigsmp_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline void bigsmp_setup_apic_routing(void)
+static void bigsmp_setup_apic_routing(void)
 {
 	printk(KERN_INFO
 		"Enabling APIC mode:  Physflat.  Using %d I/O APICs\n",
 		nr_ioapics);
 }
 
-static inline int bigsmp_apicid_to_node(int logical_apicid)
+static int bigsmp_apicid_to_node(int logical_apicid)
 {
 	return apicid_2_node[hard_smp_processor_id()];
 }
 
-static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
+static int bigsmp_cpu_present_to_apicid(int mps_cpu)
 {
 	if (mps_cpu < nr_cpu_ids)
 		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
@@ -94,7 +93,7 @@ static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
 	return BAD_APICID;
 }
 
-static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
+static physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
 {
 	return physid_mask_of_physid(phys_apicid);
 }
@@ -107,29 +106,24 @@ static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 	return cpu_physical_id(cpu);
 }
 
-static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
+static physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
 	return physids_promote(0xFFL);
 }
 
-static inline void bigsmp_setup_portio_remap(void)
-{
-}
-
-static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
+static int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
 {
 	return 1;
 }
 
 /* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
+static unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
 	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
 }
 
-static inline unsigned int
-bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
+static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 			      const struct cpumask *andmask)
 {
 	int cpu;
@@ -148,7 +142,7 @@ bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return BAD_APICID;
 }
 
-static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
+static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
 {
 	return cpuid_apic >> index_msb;
 }
@@ -158,12 +152,12 @@ static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
 	default_send_IPI_mask_sequence_phys(mask, vector);
 }
 
-static inline void bigsmp_send_IPI_allbutself(int vector)
+static void bigsmp_send_IPI_allbutself(int vector)
 {
 	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
 }
 
-static inline void bigsmp_send_IPI_all(int vector)
+static void bigsmp_send_IPI_all(int vector)
 {
 	bigsmp_send_IPI_mask(cpu_online_mask, vector);
 }
-- 
cgit v1.2.3


From c2b20cbd057b97e2f440fa3bc90b3df51de324fe Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 10:53:56 +0100
Subject: x86_32: apic/es7000_32, cpu_mask_to_apicid cleanup

Remove es7000_cpu_mask_to_apicid_cluster completely, because it's
almost the same as es7000_cpu_mask_to_apicid except 2 code paths.
One of them is about to be removed soon, the another should be
BAD_APICID (it's a fail path).

The _cluster one was not invoked on apic->cpu_mask_to_apicid_and
anyway, since there was no _cluster_and variant.

Also use newer cpumask functions.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 46 ++++------------------------------------
 1 file changed, 4 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index da37e2c59fe..9b9e86f3cfd 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -575,25 +575,21 @@ static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
 	return 1;
 }
 
-static unsigned int
-es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
+static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	int cpus_found = 0;
-	int num_bits_set;
+	unsigned int cpu, num_bits_set, cpus_found = 0;
 	int apicid;
-	int cpu;
 
 	num_bits_set = cpumask_weight(cpumask);
 	/* Return id to all */
 	if (num_bits_set == nr_cpu_ids)
-		return 0xFF;
+		return es7000_cpu_to_logical_apicid(0);
 	/*
 	 * The cpus in the mask must all be on the apic cluster.  If are not
 	 * on the same apicid cluster return default value of target_cpus():
 	 */
 	cpu = cpumask_first(cpumask);
 	apicid = es7000_cpu_to_logical_apicid(cpu);
-
 	while (cpus_found < num_bits_set) {
 		if (cpumask_test_cpu(cpu, cpumask)) {
 			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
@@ -601,40 +597,6 @@ es7000_cpu_mask_to_apicid_cluster(const struct cpumask *cpumask)
 			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 				WARN(1, "Not a valid mask!");
 
-				return 0xFF;
-			}
-			apicid = new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return es7000_cpu_to_logical_apicid(0);
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
-
-			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk("%s: Not a valid mask!\n", __func__);
-
 				return es7000_cpu_to_logical_apicid(0);
 			}
 			apicid = new_apicid;
@@ -739,7 +701,7 @@ struct apic apic_es7000_cluster = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0xFF << 24,
 
-	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid_cluster,
+	.cpu_mask_to_apicid		= es7000_cpu_mask_to_apicid,
 	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= es7000_send_IPI_mask,
-- 
cgit v1.2.3


From 0edc0b324a37c4bf9e13f3194f2f45c677808792 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 10:53:57 +0100
Subject: x86_32: apic/es7000_32, fix cpu_mask_to_apicid

Perform same-cluster checking even for masks with all (nr_cpu_ids)
bits set and report BAD_APICID on failure.

While at it, convert it to for_each_cpu.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 9b9e86f3cfd..4d8830ffe48 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -577,32 +577,22 @@ static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
 
 static unsigned int es7000_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	unsigned int cpu, num_bits_set, cpus_found = 0;
-	int apicid;
+	unsigned int round = 0;
+	int cpu, uninitialized_var(apicid);
 
-	num_bits_set = cpumask_weight(cpumask);
-	/* Return id to all */
-	if (num_bits_set == nr_cpu_ids)
-		return es7000_cpu_to_logical_apicid(0);
 	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of target_cpus():
+	 * The cpus in the mask must all be on the apic cluster.
 	 */
-	cpu = cpumask_first(cpumask);
-	apicid = es7000_cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpumask_test_cpu(cpu, cpumask)) {
-			int new_apicid = es7000_cpu_to_logical_apicid(cpu);
+	for_each_cpu(cpu, cpumask) {
+		int new_apicid = es7000_cpu_to_logical_apicid(cpu);
 
-			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				WARN(1, "Not a valid mask!");
+		if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
+			WARN(1, "Not a valid mask!");
 
-				return es7000_cpu_to_logical_apicid(0);
-			}
-			apicid = new_apicid;
-			cpus_found++;
+			return BAD_APICID;
 		}
-		cpu++;
+		apicid = new_apicid;
+		round++;
 	}
 	return apicid;
 }
-- 
cgit v1.2.3


From fae176d6e03578fee7cfe948ff9ae81bf7ea0ef0 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 10:53:58 +0100
Subject: x86_32: apic/summit_32, fix cpu_mask_to_apicid

Perform same-cluster checking even for masks with all (nr_cpu_ids)
bits set and report correct apicid on success instead.

While at it, convert it to for_each_cpu and newer cpumask api.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/summit_32.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 0a1135c5a6d..beda620bee8 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -291,33 +291,21 @@ static int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
 
 static unsigned int summit_cpu_mask_to_apicid(const cpumask_t *cpumask)
 {
-	int cpus_found = 0;
-	int num_bits_set;
-	int apicid;
-	int cpu;
+	unsigned int round = 0;
+	int cpu, apicid = 0;
 
-	num_bits_set = cpus_weight(*cpumask);
-	if (num_bits_set >= nr_cpu_ids)
-		return BAD_APICID;
 	/*
 	 * The cpus in the mask must all be on the apic cluster.
 	 */
-	cpu = first_cpu(*cpumask);
-	apicid = summit_cpu_to_logical_apicid(cpu);
-
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = summit_cpu_to_logical_apicid(cpu);
+	for_each_cpu(cpu, cpumask) {
+		int new_apicid = summit_cpu_to_logical_apicid(cpu);
 
-			if (APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-				printk("%s: Not a valid mask!\n", __func__);
-
-				return BAD_APICID;
-			}
-			apicid = apicid | new_apicid;
-			cpus_found++;
+		if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
+			printk("%s: Not a valid mask!\n", __func__);
+			return BAD_APICID;
 		}
-		cpu++;
+		apicid |= new_apicid;
+		round++;
 	}
 	return apicid;
 }
-- 
cgit v1.2.3


From 871d78c6d9fc83b2ad584788a175fcfca07a3666 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 11:34:27 +0100
Subject: x86_32: apic/es7000_32, fix section mismatch

Remove __init section placement for some functions, so that we don't
get section mismatch warnings.

[v2]:
2 of them were not caught by
DEBUG_SECTION_MISMATCH=y
magic. Fix it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/apic/es7000_32.c | 37 +++++++++++++++++--------------------
 1 file changed, 17 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 4d8830ffe48..19588f2770e 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -163,7 +163,7 @@ static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 	return 0;
 }
 
-static int __init es7000_apic_is_cluster(void)
+static int es7000_apic_is_cluster(void)
 {
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
@@ -173,7 +173,7 @@ static int __init es7000_apic_is_cluster(void)
 	return 0;
 }
 
-static void __init setup_unisys(void)
+static void setup_unisys(void)
 {
 	/*
 	 * Determine the generation of the ES7000 currently running.
@@ -192,7 +192,7 @@ static void __init setup_unisys(void)
 /*
  * Parse the OEM Table:
  */
-static int __init parse_unisys_oem(char *oemptr)
+static int parse_unisys_oem(char *oemptr)
 {
 	int			i;
 	int 			success = 0;
@@ -254,7 +254,7 @@ static int __init parse_unisys_oem(char *oemptr)
 }
 
 #ifdef CONFIG_ACPI
-static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
 	struct es7000_oem_table *table;
@@ -285,7 +285,7 @@ static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 	return 0;
 }
 
-static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 {
 	if (!oem_addr)
 		return;
@@ -303,10 +303,10 @@ static int es7000_check_dsdt(void)
 	return 0;
 }
 
-static int __initdata es7000_acpi_ret;
+static int es7000_acpi_ret;
 
 /* Hook from generic ACPI tables.c */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	unsigned long oem_addr = 0;
 	int check_dsdt;
@@ -333,8 +333,7 @@ static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return ret && !es7000_apic_is_cluster();
 }
 
-static int __init
-es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
+static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
 {
 	int ret = es7000_acpi_ret;
 
@@ -342,13 +341,12 @@ es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
 }
 
 #else /* !CONFIG_ACPI: */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 0;
 }
 
-static int __init
-es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
+static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
 {
 	return 0;
 }
@@ -362,8 +360,7 @@ static void es7000_spin(int n)
 		rep_nop();
 }
 
-static int __init
-es7000_mip_write(struct mip_reg *mip_reg)
+static int es7000_mip_write(struct mip_reg *mip_reg)
 {
 	int status = 0;
 	int spin;
@@ -396,7 +393,7 @@ es7000_mip_write(struct mip_reg *mip_reg)
 	return status;
 }
 
-static void __init es7000_enable_apic_mode(void)
+static void es7000_enable_apic_mode(void)
 {
 	struct mip_reg es7000_mip_reg;
 	int mip_status;
@@ -627,9 +624,9 @@ static int probe_es7000(void)
 	return 0;
 }
 
-static int __initdata es7000_mps_ret;
-static __init int
-es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
+static int es7000_mps_ret;
+static int es7000_mps_oem_check(struct mpc_table *mpc, char *oem,
+		char *productid)
 {
 	int ret = 0;
 
@@ -646,8 +643,8 @@ es7000_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 	return ret && !es7000_apic_is_cluster();
 }
 
-static __init int
-es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem, char *productid)
+static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
+		char *productid)
 {
 	int ret = es7000_mps_ret;
 
-- 
cgit v1.2.3


From 2fcb1f1f38e9b10ee5f339be4e17ba5cad9b4421 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 11:34:28 +0100
Subject: x86_32: apic/summit_32, fix section mismatch

Remove __init section placement for some functions/data, so that
we don't get section mismatch warnings.

Also make inline function instead of empty setup_summit macro.

[v2]
One of them was not caught by
DEBUG_SECTION_MISMATCH=y
magic. Fix it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/apic/summit_32.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index beda620bee8..aac52fa873f 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -77,9 +77,9 @@ static void summit_send_IPI_all(int vector)
 extern int use_cyclone;
 
 #ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
+static void setup_summit(void);
 #else
-#define setup_summit()	{}
+static inline void setup_summit(void) {}
 #endif
 
 static int summit_mps_oem_check(struct mpc_table *mpc, char *oem,
@@ -360,15 +360,15 @@ static void summit_vector_allocation_domain(int cpu, cpumask_t *retmask)
 }
 
 #ifdef CONFIG_X86_SUMMIT_NUMA
-static struct rio_table_hdr *rio_table_hdr __initdata;
-static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
-static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
+static struct rio_table_hdr *rio_table_hdr;
+static struct scal_detail   *scal_devs[MAX_NUMNODES];
+static struct rio_detail    *rio_devs[MAX_NUMNODES*4];
 
 #ifndef CONFIG_X86_NUMAQ
-static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+static int mp_bus_id_to_node[MAX_MP_BUSSES];
 #endif
 
-static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
+static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {
 	int twister = 0, node = 0;
 	int i, bus, num_buses;
@@ -430,7 +430,7 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 	return bus;
 }
 
-static int __init build_detail_arrays(void)
+static int build_detail_arrays(void)
 {
 	unsigned long ptr;
 	int i, scal_detail_size, rio_detail_size;
@@ -464,7 +464,7 @@ static int __init build_detail_arrays(void)
 	return 1;
 }
 
-void __init setup_summit(void)
+void setup_summit(void)
 {
 	unsigned long		ptr;
 	unsigned short		offset;
-- 
cgit v1.2.3


From b6122b3843216f3f8e9624f9e876f4f0514f9205 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 2 Mar 2009 11:34:29 +0100
Subject: x86_32: apic/numaq_32, fix section mismatch

Remove __cpuinitdata section placement for translation_table
structure, since it is referenced from a functions within .text.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/apic/numaq_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index a7f711f5110..ba2fc646553 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -69,7 +69,7 @@ struct mpc_trans {
 /* x86_quirks member */
 static int				mpc_record;
 
-static __cpuinitdata struct mpc_trans	*translation_table[MAX_MPC_ENTRY];
+static struct mpc_trans			*translation_table[MAX_MPC_ENTRY];
 
 int					mp_bus_id_to_node[MAX_MP_BUSSES];
 int					mp_bus_id_to_local[MAX_MP_BUSSES];
-- 
cgit v1.2.3


From db949bba3c7cf2e664ac12e237c6d4c914f0c69d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 27 Feb 2009 13:25:21 -0800
Subject: x86-32: use non-lazy io bitmap context switching

Impact: remove 32-bit optimization to prepare unification

x86-32 and -64 differ in the way they context-switch tasks
with io permission bitmaps.  x86-64 simply copies the next
tasks io bitmap into place (if any) on context switch.  x86-32
invalidates the bitmap on context switch, so that the next
IO instruction will fault; at that point it installs the
appropriate IO bitmap.

This makes context switching IO-bitmap-using tasks a bit more
less expensive, at the cost of making the next IO instruction
slower due to the extra fault.  This tradeoff only makes sense
if IO-bitmap-using processes are relatively common, but they
don't actually use IO instructions very often.

However, in a typical desktop system, the only process likely
to be using IO bitmaps is the X server, and nothing at all on
a server.  Therefore the lazy context switch doesn't really win
all that much, and its just a gratuitious difference from
64-bit code.

This patch removes the lazy context switch, with a view to
unifying this code in a later change.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h |  6 ------
 arch/x86/kernel/ioport.c         | 11 ----------
 arch/x86/kernel/process_32.c     | 36 ++++++++-----------------------
 arch/x86/kernel/traps.c          | 46 ----------------------------------------
 4 files changed, 9 insertions(+), 90 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c7a98f73821..76139506c3e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -248,7 +248,6 @@ struct x86_hw_tss {
 #define IO_BITMAP_LONGS			(IO_BITMAP_BYTES/sizeof(long))
 #define IO_BITMAP_OFFSET		offsetof(struct tss_struct, io_bitmap)
 #define INVALID_IO_BITMAP_OFFSET	0x8000
-#define INVALID_IO_BITMAP_OFFSET_LAZY	0x9000
 
 struct tss_struct {
 	/*
@@ -263,11 +262,6 @@ struct tss_struct {
 	 * be within the limit.
 	 */
 	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
-	/*
-	 * Cache the current maximum and the last task that used the bitmap:
-	 */
-	unsigned long		io_bitmap_max;
-	struct thread_struct	*io_bitmap_owner;
 
 	/*
 	 * .. and then another 0x100 bytes for the emergency kernel stack:
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index e41980a373a..99c4d308f16 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -85,19 +85,8 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 
 	t->io_bitmap_max = bytes;
 
-#ifdef CONFIG_X86_32
-	/*
-	 * Sets the lazy trigger so that the next I/O operation will
-	 * reload the correct bitmap.
-	 * Reset the owner so that a process switch will not set
-	 * tss->io_bitmap_base to IO_BITMAP_OFFSET.
-	 */
-	tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
-	tss->io_bitmap_owner = NULL;
-#else
 	/* Update the TSS: */
 	memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated);
-#endif
 
 	put_cpu();
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 646da41a620..a59314e877f 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -248,11 +248,8 @@ void exit_thread(void)
 		/*
 		 * Careful, clear this in the TSS too:
 		 */
-		memset(tss->io_bitmap, 0xff, tss->io_bitmap_max);
+		memset(tss->io_bitmap, 0xff, t->io_bitmap_max);
 		t->io_bitmap_max = 0;
-		tss->io_bitmap_owner = NULL;
-		tss->io_bitmap_max = 0;
-		tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
 		put_cpu();
 	}
 
@@ -458,34 +455,19 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 			hard_enable_TSC();
 	}
 
-	if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
+	if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
 		/*
-		 * Disable the bitmap via an invalid offset. We still cache
-		 * the previous bitmap owner and the IO bitmap contents:
+		 * Copy the relevant range of the IO bitmap.
+		 * Normally this is 128 bytes or less:
 		 */
-		tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
-		return;
-	}
-
-	if (likely(next == tss->io_bitmap_owner)) {
+		memcpy(tss->io_bitmap, next->io_bitmap_ptr,
+		       max(prev->io_bitmap_max, next->io_bitmap_max));
+	} else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
 		/*
-		 * Previous owner of the bitmap (hence the bitmap content)
-		 * matches the next task, we dont have to do anything but
-		 * to set a valid offset in the TSS:
+		 * Clear any possible leftover bits:
 		 */
-		tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
-		return;
+		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
 	}
-	/*
-	 * Lazy TSS's I/O bitmap copy. We set an invalid offset here
-	 * and we let the task to get a GPF in case an I/O instruction
-	 * is performed.  The handler of the GPF will verify that the
-	 * faulting task has a valid I/O bitmap and, it true, does the
-	 * real copy and restart the instruction.  This will save us
-	 * redundant copies when the currently switched task does not
-	 * perform any I/O during its timeslice.
-	 */
-	tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
 }
 
 /*
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index c05430ac1b4..a1d288327ff 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -118,47 +118,6 @@ die_if_kernel(const char *str, struct pt_regs *regs, long err)
 	if (!user_mode_vm(regs))
 		die(str, regs, err);
 }
-
-/*
- * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
- * invalid offset set (the LAZY one) and the faulting thread has
- * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS,
- * we set the offset field correctly and return 1.
- */
-static int lazy_iobitmap_copy(void)
-{
-	struct thread_struct *thread;
-	struct tss_struct *tss;
-	int cpu;
-
-	cpu = get_cpu();
-	tss = &per_cpu(init_tss, cpu);
-	thread = &current->thread;
-
-	if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
-	    thread->io_bitmap_ptr) {
-		memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
-		       thread->io_bitmap_max);
-		/*
-		 * If the previously set map was extending to higher ports
-		 * than the current one, pad extra space with 0xff (no access).
-		 */
-		if (thread->io_bitmap_max < tss->io_bitmap_max) {
-			memset((char *) tss->io_bitmap +
-				thread->io_bitmap_max, 0xff,
-				tss->io_bitmap_max - thread->io_bitmap_max);
-		}
-		tss->io_bitmap_max = thread->io_bitmap_max;
-		tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
-		tss->io_bitmap_owner = thread;
-		put_cpu();
-
-		return 1;
-	}
-	put_cpu();
-
-	return 0;
-}
 #endif
 
 static void __kprobes
@@ -309,11 +268,6 @@ do_general_protection(struct pt_regs *regs, long error_code)
 	conditional_sti(regs);
 
 #ifdef CONFIG_X86_32
-	if (lazy_iobitmap_copy()) {
-		/* restart the faulting instruction */
-		return;
-	}
-
 	if (regs->flags & X86_VM_MASK)
 		goto gp_in_vm86;
 #endif
-- 
cgit v1.2.3


From 389d1fb11e5f2a16b5e34c547756f0c4dec641f7 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 27 Feb 2009 13:25:28 -0800
Subject: x86: unify chunks of kernel/process*.c

With x86-32 and -64 using the same mechanism for managing the
tss io permissions bitmap, large chunks of process*.c are
trivially unifyable, including:

 - exit_thread
 - flush_thread
 - __switch_to_xtra (along with tsc enable/disable)

and as bonus pickups:

 - sys_fork
 - sys_vfork

(Note: asmlinkage expands to empty on x86-64)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/system.h |   2 +
 arch/x86/kernel/process.c     | 191 +++++++++++++++++++++++++++++++++++++++++-
 arch/x86/kernel/process_32.c  | 172 -------------------------------------
 arch/x86/kernel/process_64.c  | 188 -----------------------------------------
 4 files changed, 192 insertions(+), 361 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index c00bfdbdd45..1a7bf39f72d 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -20,6 +20,8 @@
 struct task_struct; /* one of the stranger aspects of C forward declarations */
 struct task_struct *__switch_to(struct task_struct *prev,
 				struct task_struct *next);
+void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
+		      struct tss_struct *tss);
 
 #ifdef CONFIG_X86_32
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 87b69d4fac1..6afa5232dbb 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -1,8 +1,8 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <asm/idle.h>
 #include <linux/smp.h>
+#include <linux/prctl.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/module.h>
@@ -11,6 +11,9 @@
 #include <linux/ftrace.h>
 #include <asm/system.h>
 #include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/uaccess.h>
+#include <asm/i387.h>
 
 unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
@@ -55,6 +58,192 @@ void arch_task_cache_init(void)
 				  SLAB_PANIC, NULL);
 }
 
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+	struct task_struct *me = current;
+	struct thread_struct *t = &me->thread;
+
+	if (me->thread.io_bitmap_ptr) {
+		struct tss_struct *tss = &per_cpu(init_tss, get_cpu());
+
+		kfree(t->io_bitmap_ptr);
+		t->io_bitmap_ptr = NULL;
+		clear_thread_flag(TIF_IO_BITMAP);
+		/*
+		 * Careful, clear this in the TSS too:
+		 */
+		memset(tss->io_bitmap, 0xff, t->io_bitmap_max);
+		t->io_bitmap_max = 0;
+		put_cpu();
+	}
+
+	ds_exit_thread(current);
+}
+
+void flush_thread(void)
+{
+	struct task_struct *tsk = current;
+
+#ifdef CONFIG_X86_64
+	if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
+		clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
+		if (test_tsk_thread_flag(tsk, TIF_IA32)) {
+			clear_tsk_thread_flag(tsk, TIF_IA32);
+		} else {
+			set_tsk_thread_flag(tsk, TIF_IA32);
+			current_thread_info()->status |= TS_COMPAT;
+		}
+	}
+#endif
+
+	clear_tsk_thread_flag(tsk, TIF_DEBUG);
+
+	tsk->thread.debugreg0 = 0;
+	tsk->thread.debugreg1 = 0;
+	tsk->thread.debugreg2 = 0;
+	tsk->thread.debugreg3 = 0;
+	tsk->thread.debugreg6 = 0;
+	tsk->thread.debugreg7 = 0;
+	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
+	/*
+	 * Forget coprocessor state..
+	 */
+	tsk->fpu_counter = 0;
+	clear_fpu(tsk);
+	clear_used_math();
+}
+
+static void hard_disable_TSC(void)
+{
+	write_cr4(read_cr4() | X86_CR4_TSD);
+}
+
+void disable_TSC(void)
+{
+	preempt_disable();
+	if (!test_and_set_thread_flag(TIF_NOTSC))
+		/*
+		 * Must flip the CPU state synchronously with
+		 * TIF_NOTSC in the current running context.
+		 */
+		hard_disable_TSC();
+	preempt_enable();
+}
+
+static void hard_enable_TSC(void)
+{
+	write_cr4(read_cr4() & ~X86_CR4_TSD);
+}
+
+static void enable_TSC(void)
+{
+	preempt_disable();
+	if (test_and_clear_thread_flag(TIF_NOTSC))
+		/*
+		 * Must flip the CPU state synchronously with
+		 * TIF_NOTSC in the current running context.
+		 */
+		hard_enable_TSC();
+	preempt_enable();
+}
+
+int get_tsc_mode(unsigned long adr)
+{
+	unsigned int val;
+
+	if (test_thread_flag(TIF_NOTSC))
+		val = PR_TSC_SIGSEGV;
+	else
+		val = PR_TSC_ENABLE;
+
+	return put_user(val, (unsigned int __user *)adr);
+}
+
+int set_tsc_mode(unsigned int val)
+{
+	if (val == PR_TSC_SIGSEGV)
+		disable_TSC();
+	else if (val == PR_TSC_ENABLE)
+		enable_TSC();
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
+		      struct tss_struct *tss)
+{
+	struct thread_struct *prev, *next;
+
+	prev = &prev_p->thread;
+	next = &next_p->thread;
+
+	if (test_tsk_thread_flag(next_p, TIF_DS_AREA_MSR) ||
+	    test_tsk_thread_flag(prev_p, TIF_DS_AREA_MSR))
+		ds_switch_to(prev_p, next_p);
+	else if (next->debugctlmsr != prev->debugctlmsr)
+		update_debugctlmsr(next->debugctlmsr);
+
+	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
+		set_debugreg(next->debugreg0, 0);
+		set_debugreg(next->debugreg1, 1);
+		set_debugreg(next->debugreg2, 2);
+		set_debugreg(next->debugreg3, 3);
+		/* no 4 and 5 */
+		set_debugreg(next->debugreg6, 6);
+		set_debugreg(next->debugreg7, 7);
+	}
+
+	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
+	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
+		/* prev and next are different */
+		if (test_tsk_thread_flag(next_p, TIF_NOTSC))
+			hard_disable_TSC();
+		else
+			hard_enable_TSC();
+	}
+
+	if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
+		/*
+		 * Copy the relevant range of the IO bitmap.
+		 * Normally this is 128 bytes or less:
+		 */
+		memcpy(tss->io_bitmap, next->io_bitmap_ptr,
+		       max(prev->io_bitmap_max, next->io_bitmap_max));
+	} else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
+		/*
+		 * Clear any possible leftover bits:
+		 */
+		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
+	}
+}
+
+int sys_fork(struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
+}
+
+/*
+ * This is trivial, and on the face of it looks like it
+ * could equally well be done in user mode.
+ *
+ * Not so, for quite unobvious reasons - register pressure.
+ * In user mode vfork() cannot have a stack frame, and if
+ * done by calling the "clone()" system call directly, you
+ * do not have enough call-clobbered registers to hold all
+ * the information you need.
+ */
+int sys_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0,
+		       NULL, NULL);
+}
+
+
 /*
  * Idle related variables and functions
  */
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a59314e877f..14014d766ca 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -230,52 +230,6 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 }
 EXPORT_SYMBOL(kernel_thread);
 
-/*
- * Free current thread data structures etc..
- */
-void exit_thread(void)
-{
-	/* The process may have allocated an io port bitmap... nuke it. */
-	if (unlikely(test_thread_flag(TIF_IO_BITMAP))) {
-		struct task_struct *tsk = current;
-		struct thread_struct *t = &tsk->thread;
-		int cpu = get_cpu();
-		struct tss_struct *tss = &per_cpu(init_tss, cpu);
-
-		kfree(t->io_bitmap_ptr);
-		t->io_bitmap_ptr = NULL;
-		clear_thread_flag(TIF_IO_BITMAP);
-		/*
-		 * Careful, clear this in the TSS too:
-		 */
-		memset(tss->io_bitmap, 0xff, t->io_bitmap_max);
-		t->io_bitmap_max = 0;
-		put_cpu();
-	}
-
-	ds_exit_thread(current);
-}
-
-void flush_thread(void)
-{
-	struct task_struct *tsk = current;
-
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
-	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
-	/*
-	 * Forget coprocessor state..
-	 */
-	tsk->fpu_counter = 0;
-	clear_fpu(tsk);
-	clear_used_math();
-}
-
 void release_thread(struct task_struct *dead_task)
 {
 	BUG_ON(dead_task->mm);
@@ -363,112 +317,6 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 }
 EXPORT_SYMBOL_GPL(start_thread);
 
-static void hard_disable_TSC(void)
-{
-	write_cr4(read_cr4() | X86_CR4_TSD);
-}
-
-void disable_TSC(void)
-{
-	preempt_disable();
-	if (!test_and_set_thread_flag(TIF_NOTSC))
-		/*
-		 * Must flip the CPU state synchronously with
-		 * TIF_NOTSC in the current running context.
-		 */
-		hard_disable_TSC();
-	preempt_enable();
-}
-
-static void hard_enable_TSC(void)
-{
-	write_cr4(read_cr4() & ~X86_CR4_TSD);
-}
-
-static void enable_TSC(void)
-{
-	preempt_disable();
-	if (test_and_clear_thread_flag(TIF_NOTSC))
-		/*
-		 * Must flip the CPU state synchronously with
-		 * TIF_NOTSC in the current running context.
-		 */
-		hard_enable_TSC();
-	preempt_enable();
-}
-
-int get_tsc_mode(unsigned long adr)
-{
-	unsigned int val;
-
-	if (test_thread_flag(TIF_NOTSC))
-		val = PR_TSC_SIGSEGV;
-	else
-		val = PR_TSC_ENABLE;
-
-	return put_user(val, (unsigned int __user *)adr);
-}
-
-int set_tsc_mode(unsigned int val)
-{
-	if (val == PR_TSC_SIGSEGV)
-		disable_TSC();
-	else if (val == PR_TSC_ENABLE)
-		enable_TSC();
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
-static noinline void
-__switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
-		 struct tss_struct *tss)
-{
-	struct thread_struct *prev, *next;
-
-	prev = &prev_p->thread;
-	next = &next_p->thread;
-
-	if (test_tsk_thread_flag(next_p, TIF_DS_AREA_MSR) ||
-	    test_tsk_thread_flag(prev_p, TIF_DS_AREA_MSR))
-		ds_switch_to(prev_p, next_p);
-	else if (next->debugctlmsr != prev->debugctlmsr)
-		update_debugctlmsr(next->debugctlmsr);
-
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		set_debugreg(next->debugreg0, 0);
-		set_debugreg(next->debugreg1, 1);
-		set_debugreg(next->debugreg2, 2);
-		set_debugreg(next->debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg6, 6);
-		set_debugreg(next->debugreg7, 7);
-	}
-
-	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
-	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
-		/* prev and next are different */
-		if (test_tsk_thread_flag(next_p, TIF_NOTSC))
-			hard_disable_TSC();
-		else
-			hard_enable_TSC();
-	}
-
-	if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
-		/*
-		 * Copy the relevant range of the IO bitmap.
-		 * Normally this is 128 bytes or less:
-		 */
-		memcpy(tss->io_bitmap, next->io_bitmap_ptr,
-		       max(prev->io_bitmap_max, next->io_bitmap_max));
-	} else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
-		/*
-		 * Clear any possible leftover bits:
-		 */
-		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
-	}
-}
 
 /*
  *	switch_to(x,yn) should switch tasks from x to y.
@@ -582,11 +430,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	return prev_p;
 }
 
-int sys_fork(struct pt_regs *regs)
-{
-	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
-}
-
 int sys_clone(struct pt_regs *regs)
 {
 	unsigned long clone_flags;
@@ -602,21 +445,6 @@ int sys_clone(struct pt_regs *regs)
 	return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
 }
 
-/*
- * This is trivial, and on the face of it looks like it
- * could equally well be done in user mode.
- *
- * Not so, for quite unobvious reasons - register pressure.
- * In user mode vfork() cannot have a stack frame, and if
- * done by calling the "clone()" system call directly, you
- * do not have enough call-clobbered registers to hold all
- * the information you need.
- */
-int sys_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0, NULL, NULL);
-}
-
 /*
  * sys_execve() executes a new program.
  */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 836ef6575f0..abb7e6a7f0c 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -237,61 +237,6 @@ void show_regs(struct pt_regs *regs)
 	show_trace(NULL, regs, (void *)(regs + 1), regs->bp);
 }
 
-/*
- * Free current thread data structures etc..
- */
-void exit_thread(void)
-{
-	struct task_struct *me = current;
-	struct thread_struct *t = &me->thread;
-
-	if (me->thread.io_bitmap_ptr) {
-		struct tss_struct *tss = &per_cpu(init_tss, get_cpu());
-
-		kfree(t->io_bitmap_ptr);
-		t->io_bitmap_ptr = NULL;
-		clear_thread_flag(TIF_IO_BITMAP);
-		/*
-		 * Careful, clear this in the TSS too:
-		 */
-		memset(tss->io_bitmap, 0xff, t->io_bitmap_max);
-		t->io_bitmap_max = 0;
-		put_cpu();
-	}
-
-	ds_exit_thread(current);
-}
-
-void flush_thread(void)
-{
-	struct task_struct *tsk = current;
-
-	if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
-		clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
-		if (test_tsk_thread_flag(tsk, TIF_IA32)) {
-			clear_tsk_thread_flag(tsk, TIF_IA32);
-		} else {
-			set_tsk_thread_flag(tsk, TIF_IA32);
-			current_thread_info()->status |= TS_COMPAT;
-		}
-	}
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
-
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
-	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
-	/*
-	 * Forget coprocessor state..
-	 */
-	tsk->fpu_counter = 0;
-	clear_fpu(tsk);
-	clear_used_math();
-}
-
 void release_thread(struct task_struct *dead_task)
 {
 	if (dead_task->mm) {
@@ -425,118 +370,6 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
 }
 EXPORT_SYMBOL_GPL(start_thread);
 
-static void hard_disable_TSC(void)
-{
-	write_cr4(read_cr4() | X86_CR4_TSD);
-}
-
-void disable_TSC(void)
-{
-	preempt_disable();
-	if (!test_and_set_thread_flag(TIF_NOTSC))
-		/*
-		 * Must flip the CPU state synchronously with
-		 * TIF_NOTSC in the current running context.
-		 */
-		hard_disable_TSC();
-	preempt_enable();
-}
-
-static void hard_enable_TSC(void)
-{
-	write_cr4(read_cr4() & ~X86_CR4_TSD);
-}
-
-static void enable_TSC(void)
-{
-	preempt_disable();
-	if (test_and_clear_thread_flag(TIF_NOTSC))
-		/*
-		 * Must flip the CPU state synchronously with
-		 * TIF_NOTSC in the current running context.
-		 */
-		hard_enable_TSC();
-	preempt_enable();
-}
-
-int get_tsc_mode(unsigned long adr)
-{
-	unsigned int val;
-
-	if (test_thread_flag(TIF_NOTSC))
-		val = PR_TSC_SIGSEGV;
-	else
-		val = PR_TSC_ENABLE;
-
-	return put_user(val, (unsigned int __user *)adr);
-}
-
-int set_tsc_mode(unsigned int val)
-{
-	if (val == PR_TSC_SIGSEGV)
-		disable_TSC();
-	else if (val == PR_TSC_ENABLE)
-		enable_TSC();
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
-/*
- * This special macro can be used to load a debugging register
- */
-#define loaddebug(thread, r) set_debugreg(thread->debugreg ## r, r)
-
-static inline void __switch_to_xtra(struct task_struct *prev_p,
-				    struct task_struct *next_p,
-				    struct tss_struct *tss)
-{
-	struct thread_struct *prev, *next;
-
-	prev = &prev_p->thread,
-	next = &next_p->thread;
-
-	if (test_tsk_thread_flag(next_p, TIF_DS_AREA_MSR) ||
-	    test_tsk_thread_flag(prev_p, TIF_DS_AREA_MSR))
-		ds_switch_to(prev_p, next_p);
-	else if (next->debugctlmsr != prev->debugctlmsr)
-		update_debugctlmsr(next->debugctlmsr);
-
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		loaddebug(next, 0);
-		loaddebug(next, 1);
-		loaddebug(next, 2);
-		loaddebug(next, 3);
-		/* no 4 and 5 */
-		loaddebug(next, 6);
-		loaddebug(next, 7);
-	}
-
-	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
-	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
-		/* prev and next are different */
-		if (test_tsk_thread_flag(next_p, TIF_NOTSC))
-			hard_disable_TSC();
-		else
-			hard_enable_TSC();
-	}
-
-	if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
-		/*
-		 * Copy the relevant range of the IO bitmap.
-		 * Normally this is 128 bytes or less:
-		 */
-		memcpy(tss->io_bitmap, next->io_bitmap_ptr,
-		       max(prev->io_bitmap_max, next->io_bitmap_max));
-	} else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
-		/*
-		 * Clear any possible leftover bits:
-		 */
-		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
-	}
-}
-
 /*
  *	switch_to(x,y) should switch tasks from x to y.
  *
@@ -694,11 +527,6 @@ void set_personality_64bit(void)
 	current->personality &= ~READ_IMPLIES_EXEC;
 }
 
-asmlinkage long sys_fork(struct pt_regs *regs)
-{
-	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
-}
-
 asmlinkage long
 sys_clone(unsigned long clone_flags, unsigned long newsp,
 	  void __user *parent_tid, void __user *child_tid, struct pt_regs *regs)
@@ -708,22 +536,6 @@ sys_clone(unsigned long clone_flags, unsigned long newsp,
 	return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
 }
 
-/*
- * This is trivial, and on the face of it looks like it
- * could equally well be done in user mode.
- *
- * Not so, for quite unobvious reasons - register pressure.
- * In user mode vfork() cannot have a stack frame, and if
- * done by calling the "clone()" system call directly, you
- * do not have enough call-clobbered registers to hold all
- * the information you need.
- */
-asmlinkage long sys_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0,
-		    NULL, NULL);
-}
-
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long stack;
-- 
cgit v1.2.3


From 2fb6b2a048ed8fa3f049c7d42f7a2dd3f0c8d7a6 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 27 Feb 2009 13:25:33 -0800
Subject: x86: add forward decl for tss_struct

Its the correct thing to do before using the struct in a prototype.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/system.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 1a7bf39f72d..643c59b4bc6 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -20,6 +20,7 @@
 struct task_struct; /* one of the stranger aspects of C forward declarations */
 struct task_struct *__switch_to(struct task_struct *prev,
 				struct task_struct *next);
+struct tss_struct;
 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		      struct tss_struct *tss);
 
-- 
cgit v1.2.3


From 9976b39b5031bbf76f715893cf080b6a17683881 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Fri, 27 Feb 2009 09:19:26 -0800
Subject: xen: deal with virtually mapped percpu data

The virtually mapped percpu space causes us two problems:

 - for hypercalls which take an mfn, we need to do a full pagetable
   walk to convert the percpu va into an mfn, and

 - when a hypercall requires a page to be mapped RO via all its aliases,
   we need to make sure its RO in both the percpu mapping and in the
   linear mapping

This primarily affects the gdt and the vcpu info structure.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/xen/page.h |  1 +
 arch/x86/xen/enlighten.c        | 10 ++++++----
 arch/x86/xen/mmu.c              |  7 +++++++
 arch/x86/xen/smp.c              |  6 +++++-
 4 files changed, 19 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 4bd990ee43d..1a918dde46b 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -164,6 +164,7 @@ static inline pte_t __pte_ma(pteval_t x)
 
 
 xmaddr_t arbitrary_virt_to_machine(void *address);
+unsigned long arbitrary_virt_to_mfn(void *vaddr);
 void make_lowmem_page_readonly(void *vaddr);
 void make_lowmem_page_readwrite(void *vaddr);
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 86497d5f44c..352ea683065 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -103,7 +103,7 @@ static void xen_vcpu_setup(int cpu)
 
 	vcpup = &per_cpu(xen_vcpu_info, cpu);
 
-	info.mfn = virt_to_mfn(vcpup);
+	info.mfn = arbitrary_virt_to_mfn(vcpup);
 	info.offset = offset_in_page(vcpup);
 
 	printk(KERN_DEBUG "trying to map vcpu_info %d at %p, mfn %llx, offset %d\n",
@@ -301,8 +301,10 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 	frames = mcs.args;
 
 	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
-		frames[f] = virt_to_mfn(va);
+		frames[f] = arbitrary_virt_to_mfn((void *)va);
+
 		make_lowmem_page_readonly((void *)va);
+		make_lowmem_page_readonly(mfn_to_virt(frames[f]));
 	}
 
 	MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
@@ -314,7 +316,7 @@ static void load_TLS_descriptor(struct thread_struct *t,
 				unsigned int cpu, unsigned int i)
 {
 	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-	xmaddr_t maddr = virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]);
+	xmaddr_t maddr = arbitrary_virt_to_machine(&gdt[GDT_ENTRY_TLS_MIN+i]);
 	struct multicall_space mc = __xen_mc_entry(0);
 
 	MULTI_update_descriptor(mc.mc, maddr.maddr, t->tls_array[i]);
@@ -488,7 +490,7 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
 		break;
 
 	default: {
-		xmaddr_t maddr = virt_to_machine(&dt[entry]);
+		xmaddr_t maddr = arbitrary_virt_to_machine(&dt[entry]);
 
 		xen_mc_flush();
 		if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 319bd40a57c..cb6afa4ec95 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -276,6 +276,13 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 	p2m_top[topidx][idx] = mfn;
 }
 
+unsigned long arbitrary_virt_to_mfn(void *vaddr)
+{
+	xmaddr_t maddr = arbitrary_virt_to_machine(vaddr);
+
+	return PFN_DOWN(maddr.maddr);
+}
+
 xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
 	unsigned long address = (unsigned long)vaddr;
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 035582ae815..8d470562ffc 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -219,6 +219,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 {
 	struct vcpu_guest_context *ctxt;
 	struct desc_struct *gdt;
+	unsigned long gdt_mfn;
 
 	if (cpumask_test_and_set_cpu(cpu, xen_cpu_initialized_map))
 		return 0;
@@ -248,9 +249,12 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->ldt_ents = 0;
 
 	BUG_ON((unsigned long)gdt & ~PAGE_MASK);
+
+	gdt_mfn = arbitrary_virt_to_mfn(gdt);
 	make_lowmem_page_readonly(gdt);
+	make_lowmem_page_readonly(mfn_to_virt(gdt_mfn));
 
-	ctxt->gdt_frames[0] = virt_to_mfn(gdt);
+	ctxt->gdt_frames[0] = gdt_mfn;
 	ctxt->gdt_ents      = GDT_ENTRIES;
 
 	ctxt->user_regs.cs = __KERNEL_CS;
-- 
cgit v1.2.3


From 55ba99eb211a06709237cb322ecd8c8b6faf6159 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 3 Mar 2009 15:40:25 +0900
Subject: sh: Add support for SH7786 CPU subtype.

This adds preliminary support for the SH7786 CPU subtype.

While this is a dual-core CPU, only UP is supported for now. L2 cache
support is likewise not yet implemented.

More information on this particular CPU subtype is available at:

	http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                         |   7 +
 arch/sh/include/asm/processor.h         |   2 +-
 arch/sh/include/cpu-sh4/cpu/freq.h      |   4 +
 arch/sh/include/cpu-sh4/cpu/sh7786.h    | 192 +++++++
 arch/sh/kernel/cpu/sh4/probe.c          |   7 +
 arch/sh/kernel/cpu/sh4a/Makefile        |   3 +
 arch/sh/kernel/cpu/sh4a/clock-sh7786.c  | 148 +++++
 arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 950 ++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c  | 407 ++++++++++++++
 arch/sh/kernel/setup.c                  |   1 +
 arch/sh/kernel/timers/timer-tmu.c       |   1 +
 arch/sh/oprofile/common.c               |   1 +
 12 files changed, 1722 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/include/cpu-sh4/cpu/sh7786.h
 create mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7786.c
 create mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
 create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7786.c

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 78a01d7d37e..0ae09683fb2 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -356,6 +356,13 @@ config CPU_SUBTYPE_SH7785
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 
+config CPU_SUBTYPE_SH7786
+	bool "Support SH7786 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
 	select CPU_SH4A
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 1ef4b24d761..1fd58b42143 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -31,7 +31,7 @@ enum cpu_type {
 	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
 
 	/* SH-4A types */
-	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
 	CPU_SH7723, CPU_SHX3,
 
 	/* SH4AL-DSP types */
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index c23af81c2e7..749d1c43433 100644
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -29,6 +29,10 @@
 #define FRQCR0			0xffc80000
 #define FRQCR1			0xffc80004
 #define FRQMR1			0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SH7786)
+#define FRQCR0			0xffc40000
+#define FRQCR1			0xffc40004
+#define FRQMR1			0xffc40014
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 #define FRQCR			0xffc00014
 #else
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h
new file mode 100644
index 00000000000..48688adc0c8
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7786.h
@@ -0,0 +1,192 @@
+/*
+ * SH7786 Pinmux
+ *
+ * Copyright (C) 2008, 2009  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ *  Based on sh7785.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __CPU_SH7786_H__
+#define __CPU_SH7786_H__
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
+	GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* PH */
+	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* PJ */
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	GPIO_FN_CDE,
+	GPIO_FN_ETH_MAGIC,
+	GPIO_FN_DISP,
+	GPIO_FN_ETH_LINK,
+	GPIO_FN_DR5,
+	GPIO_FN_ETH_TX_ER,
+	GPIO_FN_DR4,
+	GPIO_FN_ETH_TX_EN,
+	GPIO_FN_DR3,
+	GPIO_FN_ETH_TXD3,
+	GPIO_FN_DR2,
+	GPIO_FN_ETH_TXD2,
+	GPIO_FN_DR1,
+	GPIO_FN_ETH_TXD1,
+	GPIO_FN_DR0,
+	GPIO_FN_ETH_TXD0,
+	GPIO_FN_VSYNC,
+	GPIO_FN_HSPI_CLK,
+	GPIO_FN_ODDF,
+	GPIO_FN_HSPI_CS,
+	GPIO_FN_DG5,
+	GPIO_FN_ETH_MDIO,
+	GPIO_FN_DG4,
+	GPIO_FN_ETH_RX_CLK,
+	GPIO_FN_DG3,
+	GPIO_FN_ETH_MDC,
+	GPIO_FN_DG2,
+	GPIO_FN_ETH_COL,
+	GPIO_FN_DG1,
+	GPIO_FN_ETH_TX_CLK,
+	GPIO_FN_DG0,
+	GPIO_FN_ETH_CRS,
+	GPIO_FN_DCLKIN,
+	GPIO_FN_HSPI_RX,
+	GPIO_FN_HSYNC,
+	GPIO_FN_HSPI_TX,
+	GPIO_FN_DB5,
+	GPIO_FN_ETH_RXD3,
+	GPIO_FN_DB4,
+	GPIO_FN_ETH_RXD2,
+	GPIO_FN_DB3,
+	GPIO_FN_ETH_RXD1,
+	GPIO_FN_DB2,
+	GPIO_FN_ETH_RXD0,
+	GPIO_FN_DB1,
+	GPIO_FN_ETH_RX_DV,
+	GPIO_FN_DB0,
+	GPIO_FN_ETH_RX_ER,
+	GPIO_FN_DCLKOUT,
+	GPIO_FN_SCIF1_SLK,
+	GPIO_FN_SCIF1_RXD,
+	GPIO_FN_SCIF1_TXD,
+	GPIO_FN_DACK1,
+	GPIO_FN_BACK,
+	GPIO_FN_FALE,
+	GPIO_FN_DACK0,
+	GPIO_FN_FCLE,
+	GPIO_FN_DREQ1,
+	GPIO_FN_BREQ,
+	GPIO_FN_USB_OVC1,
+	GPIO_FN_DREQ0,
+	GPIO_FN_USB_OVC0,
+	GPIO_FN_USB_PENC1,
+	GPIO_FN_USB_PENC0,
+	GPIO_FN_HAC1_SDOUT,
+	GPIO_FN_SSI1_SDATA,
+	GPIO_FN_SDIF1CMD,
+	GPIO_FN_HAC1_SDIN,
+	GPIO_FN_SSI1_SCK,
+	GPIO_FN_SDIF1CD,
+	GPIO_FN_HAC1_SYNC,
+	GPIO_FN_SSI1_WS,
+	GPIO_FN_SDIF1WP,
+	GPIO_FN_HAC1_BITCLK,
+	GPIO_FN_SSI1_CLK,
+	GPIO_FN_SDIF1CLK,
+	GPIO_FN_HAC0_SDOUT,
+	GPIO_FN_SSI0_SDATA,
+	GPIO_FN_SDIF1D3,
+	GPIO_FN_HAC0_SDIN,
+	GPIO_FN_SSI0_SCK,
+	GPIO_FN_SDIF1D2,
+	GPIO_FN_HAC0_SYNC,
+	GPIO_FN_SSI0_WS,
+	GPIO_FN_SDIF1D1,
+	GPIO_FN_HAC0_BITCLK,
+	GPIO_FN_SSI0_CLK,
+	GPIO_FN_SDIF1D0,
+	GPIO_FN_SCIF3_SCK,
+	GPIO_FN_SSI2_SDATA,
+	GPIO_FN_SCIF3_RXD,
+	GPIO_FN_TCLK,
+	GPIO_FN_SSI2_SCK,
+	GPIO_FN_SCIF3_TXD,
+	GPIO_FN_HAC_RES,
+	GPIO_FN_SSI2_WS,
+	GPIO_FN_DACK3,
+	GPIO_FN_SDIF0CMD,
+	GPIO_FN_DACK2,
+	GPIO_FN_SDIF0CD,
+	GPIO_FN_DREQ3,
+	GPIO_FN_SDIF0WP,
+	GPIO_FN_SCIF0_CTS,
+	GPIO_FN_DREQ2,
+	GPIO_FN_SDIF0CLK,
+	GPIO_FN_SCIF0_RTS,
+	GPIO_FN_IRL7,
+	GPIO_FN_SDIF0D3,
+	GPIO_FN_SCIF0_SCK,
+	GPIO_FN_IRL6,
+	GPIO_FN_SDIF0D2,
+	GPIO_FN_SCIF0_RXD,
+	GPIO_FN_IRL5,
+	GPIO_FN_SDIF0D1,
+	GPIO_FN_SCIF0_TXD,
+	GPIO_FN_IRL4,
+	GPIO_FN_SDIF0D0,
+	GPIO_FN_SCIF5_SCK,
+	GPIO_FN_FRB,
+	GPIO_FN_SCIF5_RXD,
+	GPIO_FN_IOIS16,
+	GPIO_FN_SCIF5_TXD,
+	GPIO_FN_CE2B,
+	GPIO_FN_DRAK3,
+	GPIO_FN_CE2A,
+	GPIO_FN_SCIF4_SCK,
+	GPIO_FN_DRAK2,
+	GPIO_FN_SSI3_WS,
+	GPIO_FN_SCIF4_RXD,
+	GPIO_FN_DRAK1,
+	GPIO_FN_SSI3_SDATA,
+	GPIO_FN_FSTATUS,
+	GPIO_FN_SCIF4_TXD,
+	GPIO_FN_DRAK0,
+	GPIO_FN_SSI3_SCK,
+	GPIO_FN_FSE,
+};
+
+#endif /* __CPU_SH7786_H__ */
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 2e42572b1b1..2bd0ec96263 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -129,6 +129,13 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
 					  CPU_HAS_LLSC;
 		break;
+	case 0x4004:
+		boot_cpu_data.type = CPU_SH7786;
+		boot_cpu_data.icache.ways = 4;
+		boot_cpu_data.dcache.ways = 4;
+		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+			CPU_HAS_LLSC;
+		break;
 	case 0x3008:
 		boot_cpu_data.icache.ways = 4;
 		boot_cpu_data.dcache.ways = 4;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 8e344ec5847..1a92361feeb 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= setup-sh7763.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= setup-sh7786.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
@@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
@@ -31,6 +33,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
 obj-y			+= $(clock-y)
 obj-$(CONFIG_SMP)	+= $(smp-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
new file mode 100644
index 00000000000..f84a9c13447
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -0,0 +1,148 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+ *
+ * SH7786 support for the clock framework
+ *
+ * Copyright (C) 2008, 2009  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7785
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4, 1 };
+static int sfc_divisors[] = { 1, 1, 4, 1 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 1,
+			     24, 32, 1, 1, 1, 1, 1, 1 };
+static int mfc_divisors[] = { 1, 1, 4, 1 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 16, 1,
+			      24, 32, 1, 48, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
+}
+
+static struct clk_ops sh7786_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQMR1) & 0x000f);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7786_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7786_clk_ops[] = {
+	&sh7786_master_clk_ops,
+	&sh7786_module_clk_ops,
+	&sh7786_bus_clk_ops,
+	&sh7786_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7786_clk_ops))
+		*ops = sh7786_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
+	clk->rate = clk->parent->rate / sfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7786_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &sh7786_shyway_clk_ops,
+};
+
+static void ddr_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
+	clk->rate = clk->parent->rate / mfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_ddr_clk_ops = {
+	.recalc		= ddr_clk_recalc,
+};
+
+static struct clk sh7786_ddr_clk = {
+	.name		= "ddr_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &sh7786_ddr_clk_ops,
+};
+
+/*
+ * Additional SH7786-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7786_onchip_clocks[] = {
+	&sh7786_shyway_clk,
+	&sh7786_ddr_clk,
+};
+
+static int __init sh7786_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) {
+		struct clk *clkp = sh7786_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+arch_initcall(sh7786_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
new file mode 100644
index 00000000000..373b3447bfd
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c
@@ -0,0 +1,950 @@
+/*
+ * SH7786 Pinmux
+ *
+ * Copyright (C) 2008, 2009  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ *  Based on SH7785 pinmux
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7786.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+	PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
+	PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+	PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
+	PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+	PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
+	PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+	PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
+	PE7_DATA, PE6_DATA,
+	PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+	PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
+	PG7_DATA, PG6_DATA, PG5_DATA,
+	PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+	PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
+	PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+	PJ3_DATA, PJ2_DATA, PJ1_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PA7_IN, PA6_IN, PA5_IN, PA4_IN,
+	PA3_IN, PA2_IN, PA1_IN, PA0_IN,
+	PB7_IN, PB6_IN, PB5_IN, PB4_IN,
+	PB3_IN, PB2_IN, PB1_IN, PB0_IN,
+	PC7_IN, PC6_IN, PC5_IN, PC4_IN,
+	PC3_IN, PC2_IN, PC1_IN, PC0_IN,
+	PD7_IN, PD6_IN, PD5_IN, PD4_IN,
+	PD3_IN, PD2_IN, PD1_IN, PD0_IN,
+	PE7_IN, PE6_IN,
+	PF7_IN, PF6_IN, PF5_IN, PF4_IN,
+	PF3_IN, PF2_IN, PF1_IN, PF0_IN,
+	PG7_IN, PG6_IN, PG5_IN,
+	PH7_IN, PH6_IN, PH5_IN, PH4_IN,
+	PH3_IN, PH2_IN, PH1_IN, PH0_IN,
+	PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
+	PJ3_IN, PJ2_IN, PJ1_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU,
+	PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU,
+	PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU,
+	PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU,
+	PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU,
+	PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU,
+	PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU,
+	PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU,
+	PE7_IN_PU, PE6_IN_PU,
+	PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU,
+	PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU,
+	PG7_IN_PU, PG6_IN_PU, PG5_IN_PU,
+	PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU,
+	PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU,
+	PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU,
+	PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
+	PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
+	PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
+	PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
+	PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
+	PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
+	PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
+	PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
+	PE7_OUT, PE6_OUT,
+	PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
+	PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
+	PG7_OUT, PG6_OUT, PG5_OUT,
+	PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
+	PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
+	PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
+	PJ3_OUT, PJ2_OUT, PJ1_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PA7_FN, PA6_FN, PA5_FN, PA4_FN,
+	PA3_FN, PA2_FN, PA1_FN, PA0_FN,
+	PB7_FN, PB6_FN, PB5_FN, PB4_FN,
+	PB3_FN, PB2_FN, PB1_FN, PB0_FN,
+	PC7_FN, PC6_FN, PC5_FN, PC4_FN,
+	PC3_FN, PC2_FN, PC1_FN, PC0_FN,
+	PD7_FN, PD6_FN, PD5_FN, PD4_FN,
+	PD3_FN, PD2_FN, PD1_FN, PD0_FN,
+	PE7_FN, PE6_FN,
+	PF7_FN, PF6_FN, PF5_FN, PF4_FN,
+	PF3_FN, PF2_FN, PF1_FN, PF0_FN,
+	PG7_FN, PG6_FN, PG5_FN,
+	PH7_FN, PH6_FN, PH5_FN, PH4_FN,
+	PH3_FN, PH2_FN, PH1_FN, PH0_FN,
+	PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
+	PJ3_FN, PJ2_FN, PJ1_FN,
+	P1MSEL14_0, P1MSEL14_1,
+	P1MSEL13_0, P1MSEL13_1,
+	P1MSEL12_0, P1MSEL12_1,
+	P1MSEL11_0, P1MSEL11_1,
+	P1MSEL10_0, P1MSEL10_1,
+	P1MSEL9_0, P1MSEL9_1,
+	P1MSEL8_0, P1MSEL8_1,
+	P1MSEL7_0, P1MSEL7_1,
+	P1MSEL6_0, P1MSEL6_1,
+	P1MSEL5_0, P1MSEL5_1,
+	P1MSEL4_0, P1MSEL4_1,
+	P1MSEL3_0, P1MSEL3_1,
+	P1MSEL2_0, P1MSEL2_1,
+	P1MSEL1_0, P1MSEL1_1,
+	P1MSEL0_0, P1MSEL0_1,
+
+	P2MSEL15_0, P2MSEL15_1,
+	P2MSEL14_0, P2MSEL14_1,
+	P2MSEL13_0, P2MSEL13_1,
+	P2MSEL12_0, P2MSEL12_1,
+	P2MSEL11_0, P2MSEL11_1,
+	P2MSEL10_0, P2MSEL10_1,
+	P2MSEL9_0, P2MSEL9_1,
+	P2MSEL8_0, P2MSEL8_1,
+	P2MSEL7_0, P2MSEL7_1,
+	P2MSEL6_0, P2MSEL6_1,
+	P2MSEL5_0, P2MSEL5_1,
+	P2MSEL4_0, P2MSEL4_1,
+	P2MSEL3_0, P2MSEL3_1,
+	P2MSEL2_0, P2MSEL2_1,
+	P2MSEL1_0, P2MSEL1_1,
+	P2MSEL0_0, P2MSEL0_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	CDE_MARK,
+	ETH_MAGIC_MARK,
+	DISP_MARK,
+	ETH_LINK_MARK,
+	DR5_MARK,
+	ETH_TX_ER_MARK,
+	DR4_MARK,
+	ETH_TX_EN_MARK,
+	DR3_MARK,
+	ETH_TXD3_MARK,
+	DR2_MARK,
+	ETH_TXD2_MARK,
+	DR1_MARK,
+	ETH_TXD1_MARK,
+	DR0_MARK,
+	ETH_TXD0_MARK,
+
+	VSYNC_MARK,
+	HSPI_CLK_MARK,
+	ODDF_MARK,
+	HSPI_CS_MARK,
+	DG5_MARK,
+	ETH_MDIO_MARK,
+	DG4_MARK,
+	ETH_RX_CLK_MARK,
+	DG3_MARK,
+	ETH_MDC_MARK,
+	DG2_MARK,
+	ETH_COL_MARK,
+	DG1_MARK,
+	ETH_TX_CLK_MARK,
+	DG0_MARK,
+	ETH_CRS_MARK,
+
+	DCLKIN_MARK,
+	HSPI_RX_MARK,
+	HSYNC_MARK,
+	HSPI_TX_MARK,
+	DB5_MARK,
+	ETH_RXD3_MARK,
+	DB4_MARK,
+	ETH_RXD2_MARK,
+	DB3_MARK,
+	ETH_RXD1_MARK,
+	DB2_MARK,
+	ETH_RXD0_MARK,
+	DB1_MARK,
+	ETH_RX_DV_MARK,
+	DB0_MARK,
+	ETH_RX_ER_MARK,
+
+	DCLKOUT_MARK,
+	SCIF1_SLK_MARK,
+	SCIF1_RXD_MARK,
+	SCIF1_TXD_MARK,
+	DACK1_MARK,
+	BACK_MARK,
+	FALE_MARK,
+	DACK0_MARK,
+	FCLE_MARK,
+	DREQ1_MARK,
+	BREQ_MARK,
+	USB_OVC1_MARK,
+	DREQ0_MARK,
+	USB_OVC0_MARK,
+
+	USB_PENC1_MARK,
+	USB_PENC0_MARK,
+
+	HAC1_SDOUT_MARK,
+	SSI1_SDATA_MARK,
+	SDIF1CMD_MARK,
+	HAC1_SDIN_MARK,
+	SSI1_SCK_MARK,
+	SDIF1CD_MARK,
+	HAC1_SYNC_MARK,
+	SSI1_WS_MARK,
+	SDIF1WP_MARK,
+	HAC1_BITCLK_MARK,
+	SSI1_CLK_MARK,
+	SDIF1CLK_MARK,
+	HAC0_SDOUT_MARK,
+	SSI0_SDATA_MARK,
+	SDIF1D3_MARK,
+	HAC0_SDIN_MARK,
+	SSI0_SCK_MARK,
+	SDIF1D2_MARK,
+	HAC0_SYNC_MARK,
+	SSI0_WS_MARK,
+	SDIF1D1_MARK,
+	HAC0_BITCLK_MARK,
+	SSI0_CLK_MARK,
+	SDIF1D0_MARK,
+
+	SCIF3_SCK_MARK,
+	SSI2_SDATA_MARK,
+	SCIF3_RXD_MARK,
+	TCLK_MARK,
+	SSI2_SCK_MARK,
+	SCIF3_TXD_MARK,
+	HAC_RES_MARK,
+	SSI2_WS_MARK,
+
+	DACK3_MARK,
+	SDIF0CMD_MARK,
+	DACK2_MARK,
+	SDIF0CD_MARK,
+	DREQ3_MARK,
+	SDIF0WP_MARK,
+	SCIF0_CTS_MARK,
+	DREQ2_MARK,
+	SDIF0CLK_MARK,
+	SCIF0_RTS_MARK,
+	IRL7_MARK,
+	SDIF0D3_MARK,
+	SCIF0_SCK_MARK,
+	IRL6_MARK,
+	SDIF0D2_MARK,
+	SCIF0_RXD_MARK,
+	IRL5_MARK,
+	SDIF0D1_MARK,
+	SCIF0_TXD_MARK,
+	IRL4_MARK,
+	SDIF0D0_MARK,
+
+	SCIF5_SCK_MARK,
+	FRB_MARK,
+	SCIF5_RXD_MARK,
+	IOIS16_MARK,
+	SCIF5_TXD_MARK,
+	CE2B_MARK,
+	DRAK3_MARK,
+	CE2A_MARK,
+	SCIF4_SCK_MARK,
+	DRAK2_MARK,
+	SSI3_WS_MARK,
+	SCIF4_RXD_MARK,
+	DRAK1_MARK,
+	SSI3_SDATA_MARK,
+	FSTATUS_MARK,
+	SCIF4_TXD_MARK,
+	DRAK0_MARK,
+	SSI3_SCK_MARK,
+	FSE_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* PA GPIO */
+	PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU),
+	PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU),
+	PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU),
+	PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU),
+	PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU),
+	PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU),
+	PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU),
+	PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU),
+
+	/* PB GPIO */
+	PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU),
+	PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU),
+	PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU),
+	PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU),
+	PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU),
+	PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU),
+	PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU),
+	PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU),
+
+	/* PC GPIO */
+	PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU),
+	PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU),
+	PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU),
+	PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU),
+	PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU),
+	PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU),
+	PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU),
+	PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU),
+
+	/* PD GPIO */
+	PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU),
+	PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU),
+	PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU),
+	PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU),
+	PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU),
+	PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU),
+	PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU),
+	PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU),
+
+	/* PE GPIO */
+	PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT, PE7_IN_PU),
+	PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT, PE6_IN_PU),
+
+	/* PF GPIO */
+	PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU),
+	PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU),
+	PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU),
+	PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU),
+	PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU),
+	PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU),
+	PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU),
+	PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU),
+
+	/* PG GPIO */
+	PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU),
+	PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU),
+	PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU),
+
+	/* PH GPIO */
+	PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU),
+	PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU),
+	PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU),
+	PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU),
+	PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU),
+	PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU),
+	PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU),
+	PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU),
+
+	/* PJ GPIO */
+	PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU),
+	PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU),
+	PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU),
+	PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU),
+	PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU),
+	PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU),
+	PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU),
+
+	/* PA FN */
+	PINMUX_MARK_BEGIN,
+	PINMUX_DATA(CDE_MARK,		P1MSEL2_0, PA7_FN),
+	PINMUX_DATA(DISP_MARK,		P1MSEL2_0, PA6_FN),
+	PINMUX_DATA(DR5_MARK,		P1MSEL2_0, PA5_FN),
+	PINMUX_DATA(DR4_MARK,		P1MSEL2_0, PA4_FN),
+	PINMUX_DATA(DR3_MARK,		P1MSEL2_0, PA3_FN),
+	PINMUX_DATA(DR2_MARK,		P1MSEL2_0, PA2_FN),
+	PINMUX_DATA(DR1_MARK,		P1MSEL2_0, PA1_FN),
+	PINMUX_DATA(DR0_MARK,		P1MSEL2_0, PA0_FN),
+	PINMUX_DATA(ETH_MAGIC_MARK,	P1MSEL2_1, PA7_FN),
+	PINMUX_DATA(ETH_LINK_MARK,	P1MSEL2_1, PA6_FN),
+	PINMUX_DATA(ETH_TX_ER_MARK,	P1MSEL2_1, PA5_FN),
+	PINMUX_DATA(ETH_TX_EN_MARK,	P1MSEL2_1, PA4_FN),
+	PINMUX_DATA(ETH_TXD3_MARK,	P1MSEL2_1, PA3_FN),
+	PINMUX_DATA(ETH_TXD2_MARK,	P1MSEL2_1, PA2_FN),
+	PINMUX_DATA(ETH_TXD1_MARK,	P1MSEL2_1, PA1_FN),
+	PINMUX_DATA(ETH_TXD0_MARK,	P1MSEL2_1, PA0_FN),
+
+	/* PB FN */
+	PINMUX_DATA(VSYNC_MARK,		P1MSEL3_0, PB7_FN),
+	PINMUX_DATA(ODDF_MARK,		P1MSEL3_0, PB6_FN),
+	PINMUX_DATA(DG5_MARK,		P1MSEL2_0, PB5_FN),
+	PINMUX_DATA(DG4_MARK,		P1MSEL2_0, PB4_FN),
+	PINMUX_DATA(DG3_MARK,		P1MSEL2_0, PB3_FN),
+	PINMUX_DATA(DG2_MARK,		P1MSEL2_0, PB2_FN),
+	PINMUX_DATA(DG1_MARK,		P1MSEL2_0, PB1_FN),
+	PINMUX_DATA(DG0_MARK,		P1MSEL2_0, PB0_FN),
+	PINMUX_DATA(HSPI_CLK_MARK,	P1MSEL3_1, PB7_FN),
+	PINMUX_DATA(HSPI_CS_MARK,	P1MSEL3_1, PB6_FN),
+	PINMUX_DATA(ETH_MDIO_MARK,	P1MSEL2_1, PB5_FN),
+	PINMUX_DATA(ETH_RX_CLK_MARK,	P1MSEL2_1, PB4_FN),
+	PINMUX_DATA(ETH_MDC_MARK,	P1MSEL2_1, PB3_FN),
+	PINMUX_DATA(ETH_COL_MARK,	P1MSEL2_1, PB2_FN),
+	PINMUX_DATA(ETH_TX_CLK_MARK,	P1MSEL2_1, PB1_FN),
+	PINMUX_DATA(ETH_CRS_MARK,	P1MSEL2_1, PB0_FN),
+
+	/* PC FN */
+	PINMUX_DATA(DCLKIN_MARK,	P1MSEL3_0, PC7_FN),
+	PINMUX_DATA(HSYNC_MARK,		P1MSEL3_0, PC6_FN),
+	PINMUX_DATA(DB5_MARK,		P1MSEL2_0, PC5_FN),
+	PINMUX_DATA(DB4_MARK,		P1MSEL2_0, PC4_FN),
+	PINMUX_DATA(DB3_MARK,		P1MSEL2_0, PC3_FN),
+	PINMUX_DATA(DB2_MARK,		P1MSEL2_0, PC2_FN),
+	PINMUX_DATA(DB1_MARK,		P1MSEL2_0, PC1_FN),
+	PINMUX_DATA(DB0_MARK,		P1MSEL2_0, PC0_FN),
+
+	PINMUX_DATA(HSPI_RX_MARK,	P1MSEL3_1, PC7_FN),
+	PINMUX_DATA(HSPI_TX_MARK,	P1MSEL3_1, PC6_FN),
+	PINMUX_DATA(ETH_RXD3_MARK,	P1MSEL2_1, PC5_FN),
+	PINMUX_DATA(ETH_RXD2_MARK,	P1MSEL2_1, PC4_FN),
+	PINMUX_DATA(ETH_RXD1_MARK,	P1MSEL2_1, PC3_FN),
+	PINMUX_DATA(ETH_RXD0_MARK,	P1MSEL2_1, PC2_FN),
+	PINMUX_DATA(ETH_RX_DV_MARK,	P1MSEL2_1, PC1_FN),
+	PINMUX_DATA(ETH_RX_ER_MARK,	P1MSEL2_1, PC0_FN),
+
+	/* PD FN */
+	PINMUX_DATA(DCLKOUT_MARK,	PD7_FN),
+	PINMUX_DATA(SCIF1_SLK_MARK,	PD6_FN),
+	PINMUX_DATA(SCIF1_RXD_MARK,	PD5_FN),
+	PINMUX_DATA(SCIF1_TXD_MARK,	PD4_FN),
+	PINMUX_DATA(DACK1_MARK,		P1MSEL13_1, P1MSEL12_0, PD3_FN),
+	PINMUX_DATA(BACK_MARK,		P1MSEL13_0, P1MSEL12_1, PD3_FN),
+	PINMUX_DATA(FALE_MARK,		P1MSEL13_0, P1MSEL12_0, PD3_FN),
+	PINMUX_DATA(DACK0_MARK,		P1MSEL14_1, PD2_FN),
+	PINMUX_DATA(FCLE_MARK,		P1MSEL14_0, PD2_FN),
+	PINMUX_DATA(DREQ1_MARK,		P1MSEL10_0, P1MSEL9_1, PD1_FN),
+	PINMUX_DATA(BREQ_MARK,		P1MSEL10_1, P1MSEL9_0, PD1_FN),
+	PINMUX_DATA(USB_OVC1_MARK,	P1MSEL10_0, P1MSEL9_0, PD1_FN),
+	PINMUX_DATA(DREQ0_MARK,		P1MSEL11_1, PD0_FN),
+	PINMUX_DATA(USB_OVC0_MARK,	P1MSEL11_0, PD0_FN),
+
+	/* PE FN */
+	PINMUX_DATA(USB_PENC1_MARK,	PE7_FN),
+	PINMUX_DATA(USB_PENC0_MARK,	PE6_FN),
+
+	/* PF FN */
+	PINMUX_DATA(HAC1_SDOUT_MARK,	P2MSEL15_0, P2MSEL14_0, PF7_FN),
+	PINMUX_DATA(HAC1_SDIN_MARK,	P2MSEL15_0, P2MSEL14_0, PF6_FN),
+	PINMUX_DATA(HAC1_SYNC_MARK,	P2MSEL15_0, P2MSEL14_0, PF5_FN),
+	PINMUX_DATA(HAC1_BITCLK_MARK,	P2MSEL15_0, P2MSEL14_0, PF4_FN),
+	PINMUX_DATA(HAC0_SDOUT_MARK,	P2MSEL13_0, P2MSEL12_0, PF3_FN),
+	PINMUX_DATA(HAC0_SDIN_MARK,	P2MSEL13_0, P2MSEL12_0, PF2_FN),
+	PINMUX_DATA(HAC0_SYNC_MARK,	P2MSEL13_0, P2MSEL12_0, PF1_FN),
+	PINMUX_DATA(HAC0_BITCLK_MARK,	P2MSEL13_0, P2MSEL12_0, PF0_FN),
+	PINMUX_DATA(SSI1_SDATA_MARK,	P2MSEL15_0, P2MSEL14_1, PF7_FN),
+	PINMUX_DATA(SSI1_SCK_MARK,	P2MSEL15_0, P2MSEL14_1, PF6_FN),
+	PINMUX_DATA(SSI1_WS_MARK,	P2MSEL15_0, P2MSEL14_1, PF5_FN),
+	PINMUX_DATA(SSI1_CLK_MARK,	P2MSEL15_0, P2MSEL14_1, PF4_FN),
+	PINMUX_DATA(SSI0_SDATA_MARK,	P2MSEL13_0, P2MSEL12_1, PF3_FN),
+	PINMUX_DATA(SSI0_SCK_MARK,	P2MSEL13_0, P2MSEL12_1, PF2_FN),
+	PINMUX_DATA(SSI0_WS_MARK,	P2MSEL13_0, P2MSEL12_1, PF1_FN),
+	PINMUX_DATA(SSI0_CLK_MARK,	P2MSEL13_0, P2MSEL12_1, PF0_FN),
+	PINMUX_DATA(SDIF1CMD_MARK,	P2MSEL15_1, P2MSEL14_0, PF7_FN),
+	PINMUX_DATA(SDIF1CD_MARK,	P2MSEL15_1, P2MSEL14_0, PF6_FN),
+	PINMUX_DATA(SDIF1WP_MARK,	P2MSEL15_1, P2MSEL14_0, PF5_FN),
+	PINMUX_DATA(SDIF1CLK_MARK,	P2MSEL15_1, P2MSEL14_0, PF4_FN),
+	PINMUX_DATA(SDIF1D3_MARK,	P2MSEL13_1, P2MSEL12_0, PF3_FN),
+	PINMUX_DATA(SDIF1D2_MARK,	P2MSEL13_1, P2MSEL12_0, PF2_FN),
+	PINMUX_DATA(SDIF1D1_MARK,	P2MSEL13_1, P2MSEL12_0, PF1_FN),
+	PINMUX_DATA(SDIF1D0_MARK,	P2MSEL13_1, P2MSEL12_0, PF0_FN),
+
+	/* PG FN */
+	PINMUX_DATA(SCIF3_SCK_MARK,	P1MSEL8_0, PG7_FN),
+	PINMUX_DATA(SSI2_SDATA_MARK,	P1MSEL8_1, PG7_FN),
+	PINMUX_DATA(SCIF3_RXD_MARK,	P1MSEL7_0, P1MSEL6_0, PG6_FN),
+	PINMUX_DATA(SSI2_SCK_MARK,	P1MSEL7_1, P1MSEL6_0, PG6_FN),
+	PINMUX_DATA(TCLK_MARK,		P1MSEL7_0, P1MSEL6_1, PG6_FN),
+	PINMUX_DATA(SCIF3_TXD_MARK,	P1MSEL5_0, P1MSEL4_0, PG5_FN),
+	PINMUX_DATA(SSI2_WS_MARK,	P1MSEL5_1, P1MSEL4_0, PG5_FN),
+	PINMUX_DATA(HAC_RES_MARK,	P1MSEL5_0, P1MSEL4_1, PG5_FN),
+
+	/* PH FN */
+	PINMUX_DATA(DACK3_MARK,		P2MSEL4_0, PH7_FN),
+	PINMUX_DATA(SDIF0CMD_MARK,	P2MSEL4_1, PH7_FN),
+	PINMUX_DATA(DACK2_MARK,		P2MSEL4_0, PH6_FN),
+	PINMUX_DATA(SDIF0CD_MARK,	P2MSEL4_1, PH6_FN),
+	PINMUX_DATA(DREQ3_MARK,		P2MSEL4_0, PH5_FN),
+	PINMUX_DATA(SDIF0WP_MARK,	P2MSEL4_1, PH5_FN),
+	PINMUX_DATA(DREQ2_MARK,		P2MSEL3_0, P2MSEL2_1, PH4_FN),
+	PINMUX_DATA(SDIF0CLK_MARK,	P2MSEL3_1, P2MSEL2_0, PH4_FN),
+	PINMUX_DATA(SCIF0_CTS_MARK,	P2MSEL3_0, P2MSEL2_0, PH4_FN),
+	PINMUX_DATA(SDIF0D3_MARK,	P2MSEL1_1, P2MSEL0_0, PH3_FN),
+	PINMUX_DATA(SCIF0_RTS_MARK,	P2MSEL1_0, P2MSEL0_0, PH3_FN),
+	PINMUX_DATA(IRL7_MARK,		P2MSEL1_0, P2MSEL0_1, PH3_FN),
+	PINMUX_DATA(SDIF0D2_MARK,	P2MSEL1_1, P2MSEL0_0, PH2_FN),
+	PINMUX_DATA(SCIF0_SCK_MARK,	P2MSEL1_0, P2MSEL0_0, PH2_FN),
+	PINMUX_DATA(IRL6_MARK,		P2MSEL1_0, P2MSEL0_1, PH2_FN),
+	PINMUX_DATA(SDIF0D1_MARK,	P2MSEL1_1, P2MSEL0_0, PH1_FN),
+	PINMUX_DATA(SCIF0_RXD_MARK,	P2MSEL1_0, P2MSEL0_0, PH1_FN),
+	PINMUX_DATA(IRL5_MARK,		P2MSEL1_0, P2MSEL0_1, PH1_FN),
+	PINMUX_DATA(SDIF0D0_MARK,	P2MSEL1_1, P2MSEL0_0, PH0_FN),
+	PINMUX_DATA(SCIF0_TXD_MARK,	P2MSEL1_0, P2MSEL0_0, PH0_FN),
+	PINMUX_DATA(IRL4_MARK,		P2MSEL1_0, P2MSEL0_1, PH0_FN),
+
+	/* PJ FN */
+	PINMUX_DATA(SCIF5_SCK_MARK,	P2MSEL11_1, PJ7_FN),
+	PINMUX_DATA(FRB_MARK,		P2MSEL11_0, PJ7_FN),
+	PINMUX_DATA(SCIF5_RXD_MARK,	P2MSEL10_0, PJ6_FN),
+	PINMUX_DATA(IOIS16_MARK,	P2MSEL10_1, PJ6_FN),
+	PINMUX_DATA(SCIF5_TXD_MARK,	P2MSEL10_0, PJ5_FN),
+	PINMUX_DATA(CE2B_MARK,		P2MSEL10_1, PJ5_FN),
+	PINMUX_DATA(DRAK3_MARK,		P2MSEL7_0, PJ4_FN),
+	PINMUX_DATA(CE2A_MARK,		P2MSEL7_1, PJ4_FN),
+	PINMUX_DATA(SCIF4_SCK_MARK,	P2MSEL9_0, P2MSEL8_0, PJ3_FN),
+	PINMUX_DATA(DRAK2_MARK,		P2MSEL9_0, P2MSEL8_1, PJ3_FN),
+	PINMUX_DATA(SSI3_WS_MARK,	P2MSEL9_1, P2MSEL8_0, PJ3_FN),
+	PINMUX_DATA(SCIF4_RXD_MARK,	P2MSEL6_1, P2MSEL5_0, PJ2_FN),
+	PINMUX_DATA(DRAK1_MARK,		P2MSEL6_0, P2MSEL5_1, PJ2_FN),
+	PINMUX_DATA(FSTATUS_MARK,	P2MSEL6_0, P2MSEL5_0, PJ2_FN),
+	PINMUX_DATA(SSI3_SDATA_MARK,	P2MSEL6_1, P2MSEL5_1, PJ2_FN),
+	PINMUX_DATA(SCIF4_TXD_MARK,	P2MSEL6_1, P2MSEL5_0, PJ1_FN),
+	PINMUX_DATA(DRAK0_MARK,		P2MSEL6_0, P2MSEL5_1, PJ1_FN),
+	PINMUX_DATA(FSE_MARK,		P2MSEL6_0, P2MSEL5_0, PJ1_FN),
+	PINMUX_DATA(SSI3_SCK_MARK,	P2MSEL6_1, P2MSEL5_1, PJ1_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PA */
+	PINMUX_GPIO(GPIO_PA7, PA7_DATA),
+	PINMUX_GPIO(GPIO_PA6, PA6_DATA),
+	PINMUX_GPIO(GPIO_PA5, PA5_DATA),
+	PINMUX_GPIO(GPIO_PA4, PA4_DATA),
+	PINMUX_GPIO(GPIO_PA3, PA3_DATA),
+	PINMUX_GPIO(GPIO_PA2, PA2_DATA),
+	PINMUX_GPIO(GPIO_PA1, PA1_DATA),
+	PINMUX_GPIO(GPIO_PA0, PA0_DATA),
+
+	/* PB */
+	PINMUX_GPIO(GPIO_PB7, PB7_DATA),
+	PINMUX_GPIO(GPIO_PB6, PB6_DATA),
+	PINMUX_GPIO(GPIO_PB5, PB5_DATA),
+	PINMUX_GPIO(GPIO_PB4, PB4_DATA),
+	PINMUX_GPIO(GPIO_PB3, PB3_DATA),
+	PINMUX_GPIO(GPIO_PB2, PB2_DATA),
+	PINMUX_GPIO(GPIO_PB1, PB1_DATA),
+	PINMUX_GPIO(GPIO_PB0, PB0_DATA),
+
+	/* PC */
+	PINMUX_GPIO(GPIO_PC7, PC7_DATA),
+	PINMUX_GPIO(GPIO_PC6, PC6_DATA),
+	PINMUX_GPIO(GPIO_PC5, PC5_DATA),
+	PINMUX_GPIO(GPIO_PC4, PC4_DATA),
+	PINMUX_GPIO(GPIO_PC3, PC3_DATA),
+	PINMUX_GPIO(GPIO_PC2, PC2_DATA),
+	PINMUX_GPIO(GPIO_PC1, PC1_DATA),
+	PINMUX_GPIO(GPIO_PC0, PC0_DATA),
+
+	/* PD */
+	PINMUX_GPIO(GPIO_PD7, PD7_DATA),
+	PINMUX_GPIO(GPIO_PD6, PD6_DATA),
+	PINMUX_GPIO(GPIO_PD5, PD5_DATA),
+	PINMUX_GPIO(GPIO_PD4, PD4_DATA),
+	PINMUX_GPIO(GPIO_PD3, PD3_DATA),
+	PINMUX_GPIO(GPIO_PD2, PD2_DATA),
+	PINMUX_GPIO(GPIO_PD1, PD1_DATA),
+	PINMUX_GPIO(GPIO_PD0, PD0_DATA),
+
+	/* PE */
+	PINMUX_GPIO(GPIO_PE5, PE7_DATA),
+	PINMUX_GPIO(GPIO_PE4, PE6_DATA),
+
+	/* PF */
+	PINMUX_GPIO(GPIO_PF7, PF7_DATA),
+	PINMUX_GPIO(GPIO_PF6, PF6_DATA),
+	PINMUX_GPIO(GPIO_PF5, PF5_DATA),
+	PINMUX_GPIO(GPIO_PF4, PF4_DATA),
+	PINMUX_GPIO(GPIO_PF3, PF3_DATA),
+	PINMUX_GPIO(GPIO_PF2, PF2_DATA),
+	PINMUX_GPIO(GPIO_PF1, PF1_DATA),
+	PINMUX_GPIO(GPIO_PF0, PF0_DATA),
+
+	/* PG */
+	PINMUX_GPIO(GPIO_PG7, PG7_DATA),
+	PINMUX_GPIO(GPIO_PG6, PG6_DATA),
+	PINMUX_GPIO(GPIO_PG5, PG5_DATA),
+
+	/* PH */
+	PINMUX_GPIO(GPIO_PH7, PH7_DATA),
+	PINMUX_GPIO(GPIO_PH6, PH6_DATA),
+	PINMUX_GPIO(GPIO_PH5, PH5_DATA),
+	PINMUX_GPIO(GPIO_PH4, PH4_DATA),
+	PINMUX_GPIO(GPIO_PH3, PH3_DATA),
+	PINMUX_GPIO(GPIO_PH2, PH2_DATA),
+	PINMUX_GPIO(GPIO_PH1, PH1_DATA),
+	PINMUX_GPIO(GPIO_PH0, PH0_DATA),
+
+	/* PJ */
+	PINMUX_GPIO(GPIO_PJ7, PJ7_DATA),
+	PINMUX_GPIO(GPIO_PJ6, PJ6_DATA),
+	PINMUX_GPIO(GPIO_PJ5, PJ5_DATA),
+	PINMUX_GPIO(GPIO_PJ4, PJ4_DATA),
+	PINMUX_GPIO(GPIO_PJ3, PJ3_DATA),
+	PINMUX_GPIO(GPIO_PJ2, PJ2_DATA),
+	PINMUX_GPIO(GPIO_PJ1, PJ1_DATA),
+
+	/* FN */
+	PINMUX_GPIO(GPIO_FN_CDE,		CDE_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_MAGIC,		ETH_MAGIC_MARK),
+	PINMUX_GPIO(GPIO_FN_DISP,		DISP_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_LINK,		ETH_LINK_MARK),
+	PINMUX_GPIO(GPIO_FN_DR5,		DR5_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TX_ER,		ETH_TX_ER_MARK),
+	PINMUX_GPIO(GPIO_FN_DR4,		DR4_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TX_EN,		ETH_TX_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_DR3,		DR3_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TXD3,		ETH_TXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_DR2,		DR2_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TXD2,		ETH_TXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_DR1,		DR1_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TXD1,		ETH_TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_DR0,		DR0_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TXD0,		ETH_TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_VSYNC,		VSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_CLK,		HSPI_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_ODDF,		ODDF_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_CS,		HSPI_CS_MARK),
+	PINMUX_GPIO(GPIO_FN_DG5,		DG5_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_MDIO,		ETH_MDIO_MARK),
+	PINMUX_GPIO(GPIO_FN_DG4,		DG4_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RX_CLK,		ETH_RX_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_DG3,		DG3_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_MDC,		ETH_MDC_MARK),
+	PINMUX_GPIO(GPIO_FN_DG2,		DG2_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_COL,		ETH_COL_MARK),
+	PINMUX_GPIO(GPIO_FN_DG1,		DG1_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_TX_CLK,		ETH_TX_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_DG0,		DG0_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_CRS,		ETH_CRS_MARK),
+	PINMUX_GPIO(GPIO_FN_DCLKIN,		DCLKIN_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_RX,		HSPI_RX_MARK),
+	PINMUX_GPIO(GPIO_FN_HSYNC,		HSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_HSPI_TX,		HSPI_TX_MARK),
+	PINMUX_GPIO(GPIO_FN_DB5,		DB5_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RXD3,		ETH_RXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_DB4,		DB4_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RXD2,		ETH_RXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_DB3,		DB3_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RXD1,		ETH_RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_DB2,		DB2_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RXD0,		ETH_RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_DB1,		DB1_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RX_DV,		ETH_RX_DV_MARK),
+	PINMUX_GPIO(GPIO_FN_DB0,		DB0_MARK),
+	PINMUX_GPIO(GPIO_FN_ETH_RX_ER,		ETH_RX_ER_MARK),
+	PINMUX_GPIO(GPIO_FN_DCLKOUT,		DCLKOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_SLK,		SCIF1_SLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_RXD,		SCIF1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF1_TXD,		SCIF1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK1,		DACK1_MARK),
+	PINMUX_GPIO(GPIO_FN_BACK,		BACK_MARK),
+	PINMUX_GPIO(GPIO_FN_FALE,		FALE_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0,		DACK0_MARK),
+	PINMUX_GPIO(GPIO_FN_FCLE,		FCLE_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1,		DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_BREQ,		BREQ_MARK),
+	PINMUX_GPIO(GPIO_FN_USB_OVC1,		USB_OVC1_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0,		DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_USB_OVC0,		USB_OVC0_MARK),
+	PINMUX_GPIO(GPIO_FN_USB_PENC1,		USB_PENC1_MARK),
+	PINMUX_GPIO(GPIO_FN_USB_PENC0,		USB_PENC0_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SDOUT,		HAC1_SDOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_SDATA,		SSI1_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1CMD,		SDIF1CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SDIN,		HAC1_SDIN_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_SCK,		SSI1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1CD,		SDIF1CD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_SYNC,		HAC1_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_WS,		SSI1_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1WP,		SDIF1WP_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC1_BITCLK,	HAC1_BITCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI1_CLK,		SSI1_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1CLK,		SDIF1CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SDOUT,		HAC0_SDOUT_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_SDATA,		SSI0_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1D3,		SDIF1D3_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SDIN,		HAC0_SDIN_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_SCK,		SSI0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1D2,		SDIF1D2_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_SYNC,		HAC0_SYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_WS,		SSI0_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1D1,		SDIF1D1_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC0_BITCLK,	HAC0_BITCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI0_CLK,		SSI0_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF1D0,		SDIF1D0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_SCK,		SCIF3_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI2_SDATA,		SSI2_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_RXD,		SCIF3_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_TCLK,		TCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI2_SCK,		SSI2_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF3_TXD,		SCIF3_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_HAC_RES,		HAC_RES_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI2_WS,		SSI2_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK3,		DACK3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0CMD,		SDIF0CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK2,		DACK2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0CD,		SDIF0CD_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ3,		DREQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0WP,		SDIF0WP_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_CTS,		SCIF0_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ2,		DREQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0CLK,		SDIF0CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RTS,		SCIF0_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL7,		IRL7_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0D3,		SDIF0D3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_SCK,		SCIF0_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL6,		IRL6_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0D2,		SDIF0D2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_RXD,		SCIF0_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL5,		IRL5_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0D1,		SDIF0D1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF0_TXD,		SCIF0_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_IRL4,		IRL4_MARK),
+	PINMUX_GPIO(GPIO_FN_SDIF0D0,		SDIF0D0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_SCK,		SCIF5_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FRB,		FRB_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_RXD,		SCIF5_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_IOIS16,		IOIS16_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF5_TXD,		SCIF5_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2B,		CE2B_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK3,		DRAK3_MARK),
+	PINMUX_GPIO(GPIO_FN_CE2A,		CE2A_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_SCK,		SCIF4_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK2,		DRAK2_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI3_WS,		SSI3_WS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_RXD,		SCIF4_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK1,		DRAK1_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI3_SDATA,		SSI3_SDATA_MARK),
+	PINMUX_GPIO(GPIO_FN_FSTATUS,		FSTATUS_MARK),
+	PINMUX_GPIO(GPIO_FN_SCIF4_TXD,		SCIF4_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_DRAK0,		DRAK0_MARK),
+	PINMUX_GPIO(GPIO_FN_SSI3_SCK,		SSI3_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_FSE,		FSE_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2) {
+		PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU,
+		PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU,
+		PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU,
+		PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU,
+		PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU,
+		PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU,
+		PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU,
+		PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2) {
+		PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU,
+		PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU,
+		PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU,
+		PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU,
+		PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU,
+		PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU,
+		PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU,
+		PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2) {
+		PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU,
+		PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU,
+		PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU,
+		PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU,
+		PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU,
+		PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU,
+		PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU,
+		PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2) {
+		PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU,
+		PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU,
+		PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU,
+		PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU,
+		PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU,
+		PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU,
+		PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU,
+		PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xffcc0008, 16, 2) {
+		PE7_FN, PE7_OUT, PE7_IN, PE7_IN_PU,
+		PE6_FN, PE6_OUT, PE6_IN, PE6_IN_PU,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0, }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2) {
+		PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU,
+		PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU,
+		PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU,
+		PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU,
+		PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU,
+		PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU,
+		PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU,
+		PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xffcc000c, 16, 2) {
+		PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU,
+		PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU,
+		PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0, }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2) {
+		PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU,
+		PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU,
+		PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU,
+		PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU,
+		PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU,
+		PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU,
+		PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU,
+		PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2) {
+		PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU,
+		PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU,
+		PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU,
+		PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU,
+		PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU,
+		PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU,
+		PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU,
+		0, 0, 0, 0, }
+	},
+	{ PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1) {
+		0, 0,
+		P1MSEL14_0, P1MSEL14_1,
+		P1MSEL13_0, P1MSEL13_1,
+		P1MSEL12_0, P1MSEL12_1,
+		P1MSEL11_0, P1MSEL11_1,
+		P1MSEL10_0, P1MSEL10_1,
+		P1MSEL9_0,  P1MSEL9_1,
+		P1MSEL8_0,  P1MSEL8_1,
+		P1MSEL7_0,  P1MSEL7_1,
+		P1MSEL6_0,  P1MSEL6_1,
+		P1MSEL5_0,  P1MSEL5_1,
+		P1MSEL4_0,  P1MSEL4_1,
+		P1MSEL3_0,  P1MSEL3_1,
+		P1MSEL2_0,  P1MSEL2_1,
+		P1MSEL1_0,  P1MSEL1_1,
+		P1MSEL0_0,  P1MSEL0_1 }
+	},
+	{ PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1) {
+		P2MSEL15_0, P2MSEL15_1,
+		P2MSEL14_0, P2MSEL14_1,
+		P2MSEL13_0, P2MSEL13_1,
+		P2MSEL12_0, P2MSEL12_1,
+		P2MSEL11_0, P2MSEL11_1,
+		P2MSEL10_0, P2MSEL10_1,
+		P2MSEL9_0,  P2MSEL9_1,
+		P2MSEL8_0,  P2MSEL8_1,
+		P2MSEL7_0,  P2MSEL7_1,
+		P2MSEL6_0,  P2MSEL6_1,
+		P2MSEL5_0,  P2MSEL5_1,
+		P2MSEL4_0,  P2MSEL4_1,
+		P2MSEL3_0,  P2MSEL3_1,
+		P2MSEL2_0,  P2MSEL2_1,
+		P2MSEL1_0,  P2MSEL1_1,
+		P2MSEL0_0,  P2MSEL0_1 }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xffcc0020, 8) {
+		PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+		PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xffcc0022, 8) {
+		PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+		PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xffcc0024, 8) {
+		PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+		PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xffcc0026, 8) {
+		PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+		PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xffcc0028, 8) {
+		PE7_DATA, PE6_DATA,
+		0, 0, 0, 0, 0, 0 }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xffcc002a, 8) {
+		PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+		PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xffcc002c, 8) {
+		PG7_DATA, PG6_DATA, PG5_DATA, 0,
+		0, 0, 0, 0 }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xffcc002e, 8) {
+		PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+		PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xffcc0030, 8) {
+		PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+		PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7786_pinmux_info = {
+	.name = "sh7786_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PA7,
+	.last_gpio = GPIO_FN_FSE,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7786_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
new file mode 100644
index 00000000000..249b99e1adb
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -0,0 +1,407 @@
+/*
+ * SH7786 Setup
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7785 Setup
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <asm/mmzone.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffea0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	},
+	/*
+	 * The rest of these all have multiplexed IRQs
+	 */
+	{
+		.mapbase	= 0xffeb0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 44, 44, 44, 44 },
+	}, {
+		.mapbase	= 0xffec0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 50, 50, 50, 50 },
+	}, {
+		.mapbase	= 0xffed0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 51, 51, 51, 51 },
+	}, {
+		.mapbase	= 0xffee0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 52, 52, 52 },
+	}, {
+		.mapbase	= 0xffef0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 53, 53, 53, 53 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7786_devices_setup(void)
+{
+	return platform_add_devices(sh7786_devices,
+				    ARRAY_SIZE(sh7786_devices));
+}
+device_initcall(sh7786_devices_setup);
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	WDT,
+	TMU0_0, TMU0_1, TMU0_2, TMU0_3,
+	TMU1_0, TMU1_1, TMU1_2,
+	DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
+	HUDI1, HUDI0,
+	DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
+	HPB_0, HPB_1, HPB_2,
+	SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
+	SCIF1,
+	TMU2, TMU3,
+	SCIF2, SCIF3, SCIF4, SCIF5,
+	Eth_0, Eth_1,
+	PCIeC0_0, PCIeC0_1, PCIeC0_2,
+	PCIeC1_0, PCIeC1_1, PCIeC1_2,
+	USB,
+	I2C0, I2C1,
+	DU,
+	SSI0, SSI1, SSI2, SSI3,
+	PCIeC2_0, PCIeC2_1, PCIeC2_2,
+	HAC0, HAC1,
+	FLCTL,
+	HSPI,
+	GPIO0, GPIO1,
+	Thermal,
+	INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7,
+
+	/* interrupt groups */
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(WDT, 0x3e0),
+	INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420),
+	INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460),
+	INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0),
+	INTC_VECT(TMU1_2, 0x4c0),
+	INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520),
+	INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560),
+	INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0),
+	INTC_VECT(DMAC0_6, 0x5c0),
+	INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600),
+	INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640),
+	INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680),
+	INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0),
+	INTC_VECT(HPB_2, 0x6e0),
+	INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720),
+	INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760),
+	INTC_VECT(SCIF1, 0x780),
+	INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0),
+	INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860),
+	INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0),
+	INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0),
+	INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00),
+	INTC_VECT(PCIeC0_2, 0xb20),
+	INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60),
+	INTC_VECT(PCIeC1_2, 0xb80),
+	INTC_VECT(USB, 0xba0),
+	INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0),
+	INTC_VECT(DU, 0xd00),
+	INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40),
+	INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80),
+	INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0),
+	INTC_VECT(PCIeC2_2, 0xde0),
+	INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20),
+	INTC_VECT(FLCTL, 0xe40),
+	INTC_VECT(HSPI, 0xe80),
+	INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
+	INTC_VECT(Thermal, 0xee0),
+};
+
+/* FIXME: Main CPU support only now */
+#if 1 /* Main CPU */
+#define CnINTMSK0	0xfe410030
+#define CnINTMSK1	0xfe410040
+#define CnINTMSKCLR0	0xfe410050
+#define CnINTMSKCLR1	0xfe410060
+#define CnINT2MSKR0	0xfe410a20
+#define CnINT2MSKR1	0xfe410a24
+#define CnINT2MSKR2	0xfe410a28
+#define CnINT2MSKR3	0xfe410a2c
+#define CnINT2MSKCR0	0xfe410a30
+#define CnINT2MSKCR1	0xfe410a34
+#define CnINT2MSKCR2	0xfe410a38
+#define CnINT2MSKCR3	0xfe410a3c
+#else /* Sub CPU */
+#define CnINTMSK0	0xfe410034
+#define CnINTMSK1	0xfe410044
+#define CnINTMSKCLR0	0xfe410054
+#define CnINTMSKCLR1	0xfe410064
+#define CnINT2MSKR0	0xfe410b20
+#define CnINT2MSKR1	0xfe410b24
+#define CnINT2MSKR2	0xfe410b28
+#define CnINT2MSKR3	0xfe410b2c
+#define CnINT2MSKCR0	0xfe410b30
+#define CnINT2MSKCR1	0xfe410b34
+#define CnINT2MSKCR2	0xfe410b38
+#define CnINT2MSKCR3	0xfe410b3c
+#endif
+
+#define INTMSK2		0xfe410068
+#define INTMSKCLR2	0xfe41006c
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ CnINTMSK0, CnINTMSKCLR0, 32,
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ INTMSK2, INTMSKCLR2, 32,
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+	{ CnINT2MSKR0, CnINT2MSKCR0 , 32,
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT } },
+	{ CnINT2MSKR1, CnINT2MSKCR1, 32,
+	  { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
+	    DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
+	    HUDI1, HUDI0,
+	    DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
+	    HPB_0, HPB_1, HPB_2,
+	    SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
+	    SCIF1,
+	    TMU2, TMU3, 0, } },
+	{ CnINT2MSKR2, CnINT2MSKCR2, 32,
+	  { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
+	    Eth_0, Eth_1,
+	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    PCIeC0_0, PCIeC0_1, PCIeC0_2,
+	    PCIeC1_0, PCIeC1_1, PCIeC1_2,
+	    USB, 0, 0 } },
+	{ CnINT2MSKR3, CnINT2MSKCR3, 32,
+	  { 0, 0, 0, 0, 0, 0,
+	    I2C0, I2C1,
+	    DU, SSI0, SSI1, SSI2, SSI3,
+	    PCIeC2_0, PCIeC2_1, PCIeC2_2,
+	    HAC0, HAC1,
+	    FLCTL, 0,
+	    HSPI, GPIO0, GPIO1, Thermal,
+	    0, 0, 0, 0, 0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfe410010, 0, 32, 4, /* INTPRI */   { IRQ0, IRQ1, IRQ2, IRQ3,
+						 IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } },
+	{ 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1,
+						 TMU0_2, TMU0_3 } },
+	{ 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1,
+						 TMU1_2, 0 } },
+	{ 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1,
+						 DMAC0_2, DMAC0_3 } },
+	{ 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5,
+						 DMAC0_6, HUDI1 } },
+	{ 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0,
+						 DMAC1_1, DMAC1_2 } },
+	{ 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0,
+						 HPB_1, HPB_2 } },
+	{ 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1,
+						 SCIF0_2, SCIF0_3 } },
+	{ 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } },
+	{ 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } },
+	{ 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5,
+						  Eth_0, Eth_1 } },
+	{ 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } },
+	{ 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } },
+	{ 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } },
+	{ 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } },
+	{ 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2,
+						  PCIeC1_0, PCIeC1_1 } },
+	{ 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } },
+	{ 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } },
+	{ 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } },
+	{ 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } },
+	{ 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0,
+						  PCIeC2_1, PCIeC2_2 } },
+	{ 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } },
+	{ 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0,
+						  GPIO1, Thermal } },
+	{ 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
+	{ 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
+	INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+	INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
+	INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xfe41001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xfe410024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl0123[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+	INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920),
+	INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960),
+	INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0),
+	INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0),
+	INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20),
+	INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60),
+	INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0),
+	INTC_VECT(IRL4_HHHL, 0xac0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123,
+			 NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
+			 NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xfe410000
+#define INTC_INTMSK0	CnINTMSK0
+#define INTC_INTMSK1	CnINTMSK1
+#define INTC_INTMSK2	INTMSK2
+#define INTC_INTMSKCLR1	CnINTMSKCLR1
+#define INTC_INTMSKCLR2	INTMSKCLR2
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 + IRQ7-4 */
+	ctrl_outl(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	ctrl_outl(0xc0000000, INTC_INTMSK1);
+	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		/* select IRQ mode for IRL7-4 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 370d2cfa34e..61ab2a7f864 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -432,6 +432,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
 	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
+	[CPU_SH7786]	= "SH7786",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
 	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 2b62f9cff22..10b5a6f17cc 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -244,6 +244,7 @@ static int tmu_timer_init(void)
     !defined(CONFIG_CPU_SUBTYPE_SH7721) && \
     !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
     !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7786) && \
     !defined(CONFIG_CPU_SUBTYPE_SHX3)
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
 #endif
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index 1d97d64cb95..1b9d4304b3b 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -107,6 +107,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_SH7780:
 	case CPU_SH7781:
 	case CPU_SH7785:
+	case CPU_SH7786:
 	case CPU_SH7723:
 	case CPU_SHX3:
 		lmodel = &op_model_sh4a_ops;
-- 
cgit v1.2.3


From 37042fbd8b3256d2a44b17646fa9de8777d5a34a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 3 Mar 2009 15:57:02 +0900
Subject: sh: SH7786 is an SH-X3 core, select CPU_SHX3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0ae09683fb2..83aee3db54b 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -359,7 +359,7 @@ config CPU_SUBTYPE_SH7785
 config CPU_SUBTYPE_SH7786
 	bool "Support SH7786 processor"
 	select CPU_SH4A
-	select CPU_SHX2
+	select CPU_SHX3
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 
-- 
cgit v1.2.3


From 5ac072e110ff358a9ebc318a1b54f0182b799f72 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 3 Mar 2009 16:22:00 +0900
Subject: sh: Urquell board support.

This adds preliminary support for the SH7786-based Urquell board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig                     |   5 +
 arch/sh/boards/Makefile                    |   1 +
 arch/sh/boards/board-urquell.c             | 128 +++++++
 arch/sh/configs/urquell_defconfig          | 534 +++++++++++++++++++++++++++++
 arch/sh/include/mach-common/mach/urquell.h |  68 ++++
 arch/sh/tools/mach-types                   |   1 +
 6 files changed, 737 insertions(+)
 create mode 100644 arch/sh/boards/board-urquell.c
 create mode 100644 arch/sh/configs/urquell_defconfig
 create mode 100644 arch/sh/include/mach-common/mach/urquell.h

(limited to 'arch')

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index c9da37088d2..694abecf602 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -162,6 +162,11 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 	  you can access all on-board device in 29bit address mode.
 
+config SH_URQUELL
+	bool "Urquell"
+	depends on CPU_SUBTYPE_SH7786
+	select ARCH_REQUIRE_GPIOLIB
+
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 269ae2be49e..6f101a8161f 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -4,5 +4,6 @@
 obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
new file mode 100644
index 00000000000..d5caeabf46e
--- /dev/null
+++ b/arch/sh/boards/board-urquell.c
@@ -0,0 +1,128 @@
+/*
+ * Renesas Technology Corp. SH7786 Urquell Support.
+ *
+ * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <mach/urquell.h>
+#include <cpu/sh7786.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= BOARDREG(SLEDR),
+		.end	= BOARDREG(SLEDR),
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *urquell_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+};
+
+static int __init urquell_devices_setup(void)
+{
+	/* USB */
+	gpio_request(GPIO_FN_USB_OVC0,  NULL);
+	gpio_request(GPIO_FN_USB_PENC0, NULL);
+
+	return platform_add_devices(urquell_devices,
+				    ARRAY_SIZE(urquell_devices));
+}
+device_initcall(urquell_devices_setup);
+
+static void urquell_power_off(void)
+{
+	__raw_writew(0xa5a5, UBOARDREG(SRSTR));
+}
+
+/* Initialize the board */
+static void __init urquell_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
+
+	pm_power_off = urquell_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_urquell __initmv = {
+	.mv_name	= "Urquell",
+	.mv_setup	= urquell_setup,
+};
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
new file mode 100644
index 00000000000..94a4bdbd1bc
--- /dev/null
+++ b/arch/sh/configs/urquell_defconfig
@@ -0,0 +1,534 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Tue Mar  3 16:20:09 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_PRINTK is not set
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SH7786=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_URQUELL=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=31250000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h
new file mode 100644
index 00000000000..14b3e1d0177
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/urquell.h
@@ -0,0 +1,68 @@
+#ifndef __MACH_URQUELL_H
+#define __MACH_URQUELL_H
+
+/*
+ * ------ 0x00000000 ------------------------------------
+ *  CS0 | (SW1,SW47)    EEPROM, SRAM, NOR FLASH
+ * -----+ 0x04000000 ------------------------------------
+ *  CS1 | (SW47)        SRAM, SRAM-LAN-PCMCIA, NOR FLASH
+ * -----+ 0x08000000 ------------------------------------
+ *  CS2 |               DDR3
+ *  CS3 |
+ * -----+ 0x10000000 ------------------------------------
+ *  CS4 |               PCIe
+ * -----+ 0x14000000 ------------------------------------
+ *  CS5 | (SW47)        LRAM/URAM, SRAM-LAN-PCMCIA
+ * -----+ 0x18000000 ------------------------------------
+ *  CS6 |               ATA, NAND FLASH
+ * -----+ 0x1c000000 ------------------------------------
+ *  CS7 |               SH7786 register
+ * -----+------------------------------------------------
+ */
+
+#define NOR_FLASH_ADDR	0x00000000
+#define NOR_FLASH_SIZE	0x04000000
+
+#define CS1_BASE	0x05000000
+#define CS5_BASE	0x15000000
+#define FPGA_BASE	CS1_BASE
+
+#define BOARDREG(ofs)	(FPGA_BASE + ofs##_OFS)
+#define UBOARDREG(ofs)	(0xa0000000 + FPGA_BASE + ofs##_OFS)
+
+#define SRSTR_OFS	0x0000 /* System reset register */
+#define BDMR_OFS	0x0010 /* Board operating mode resister */
+#define IRL0SR_OFS	0x0020 /* IRL0 Status register */
+#define IRL0MSKR_OFS	0x0030 /* IRL0 Mask register */
+#define IRL1SR_OFS	0x0040 /* IRL1 Status register */
+#define IRL1MSKR_OFS	0x0050 /* IRL1 Mask register */
+#define IRL2SR_OFS	0x0060 /* IRL2 Status register */
+#define IRL2MSKR_OFS	0x0070 /* IRL2 Mask register */
+#define IRL3SR_OFS	0x0080 /* IRL3 Status register */
+#define IRL3MSKR_OFS	0x0090 /* IRL3 Mask register */
+#define SOFTINTR_OFS	0x0120 /* Softwear Interrupt register */
+#define SLEDR_OFS	0x0130 /* LED control resister */
+#define MAPSCIFSWR_OFS	0x0140 /* Map/SCIF Switch register */
+#define FPVERR_OFS	0x0150 /* FPGA Version register */
+#define FPDATER_OFS	0x0160 /* FPGA Date register */
+#define FPYEARR_OFS	0x0170 /* FPGA Year register */
+#define TCLKCR_OFS	0x0180 /* TCLK Control register */
+#define DIPSWMR_OFS	0x1000 /* DIPSW monitor register */
+#define FPODR_OFS	0x1010 /* Output port data register */
+#define ATACNR_OFS	0x1020 /* ATA-CN Control/status register */
+#define FPINDR_OFS	0x1030 /* Input port data register */
+#define MDSWMR_OFS	0x1040 /* MODE SW monitor register */
+#define DDR3BUPCR_OFS	0x1050 /* DDR3 Backup control register */
+#define SSICODECCR_OFS	0x1060 /* SSI-CODEC control register */
+#define PCIESLOTSR_OFS	0x1070 /* PCIexpress Slot status register */
+#define ETHERPORTSR_OFS	0x1080 /* EtherPhy Port status register */
+#define LATCHCR_OFS	0x3000 /* Latch control register */
+#define LATCUAR_OFS	0x3010 /* Latch upper address register */
+#define LATCLAR_OFS	0x3012 /* Latch lower address register */
+#define LATCLUDR_OFS	0x3024 /* Latch D31-16 register */
+#define LATCLLDR_OFS	0x3026 /* Latch D15-0 register */
+
+#define CHARLED_OFS	0x2000 /* Character LED */
+
+#endif  /* __MACH_URQUELL_H */
+
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 284b7e86749..8f9e1662fa9 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -52,3 +52,4 @@ RSK7203			SH_RSK7203
 AP325RXA		SH_AP325RXA
 SH7763RDP		SH_SH7763RDP
 SH7785LCR		SH_SH7785LCR
+URQUELL			SH_URQUELL
-- 
cgit v1.2.3


From 2505170211f7630361a852e25b60f4df4c878daa Mon Sep 17 00:00:00 2001
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Date: Mon, 2 Mar 2009 17:20:01 -0800
Subject: x86, signals: fix xine & firefox bustage

Impact: fix bad frame in rt_sigreturn on 64-bit

After commit 97286a2b64725aac2d584ddd1f94871f9991d5a1 some applications
fail to return from signal handler:

[  145.150133] firefox[3250] bad frame in rt_sigreturn frame:00007f902b44eb28 ip:352e80b307 sp:7f902b44ef70 orax:ffffffffffffffff in libpthread-2.9.so[352e800000+17000]
[  665.519017] firefox[5420] bad frame in rt_sigreturn frame:00007faa8deaeb28 ip:352e80b307 sp:7faa8deaef70 orax:ffffffffffffffff in libpthread-2.9.so[352e800000+17000]

The root cause is forgetting to keep 64 byte aligned value of
fpstate for next stack pointer calculation.

Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
LKML-Reference: <49AC85C1.7060600@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/signal.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index dde3f2ae237..d2cc6428c58 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -240,11 +240,10 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
 
 	if (used_math()) {
 		sp -= sig_xstate_size;
-#ifdef CONFIG_X86_32
-		*fpstate = (void __user *) sp;
-#else /* !CONFIG_X86_32 */
-		*fpstate = (void __user *)round_down(sp, 64);
-#endif /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_64
+		sp = round_down(sp, 64);
+#endif /* CONFIG_X86_64 */
+		*fpstate = (void __user *)sp;
 
 		if (save_i387_xstate(*fpstate) < 0)
 			return (void __user *)-1L;
-- 
cgit v1.2.3


From 2b688dfd0a93cf3b17c38feef693361da47b0606 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Tue, 3 Mar 2009 12:55:04 +0200
Subject: x86: move __VMALLOC_RESERVE to pgtable_32.c

Impact: cleanup

The __VMALLOC_RESERVE global variable is not used in init_32.c. Move that to
pgtable_32.c to reduce the diff between init_32.c and init_64.c.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236077704.2675.4.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c    | 2 --
 arch/x86/mm/pgtable_32.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 06708ee94aa..5b06a2f5dea 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -50,8 +50,6 @@
 #include <asm/setup.h>
 #include <asm/cacheflush.h>
 
-unsigned int __VMALLOC_RESERVE = 128 << 20;
-
 unsigned long max_low_pfn_mapped;
 unsigned long max_pfn_mapped;
 
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 0951db9ee51..e4032c886c3 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,6 +20,8 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
+unsigned int __VMALLOC_RESERVE = 128 << 20;
+
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
-- 
cgit v1.2.3


From fd578f9c0a0a7bf3e460e6f21cdc6f4018949e80 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Tue, 3 Mar 2009 12:55:05 +0200
Subject: x86: use roundup() instead of PAGE_ALIGN() in
 find_early_table_space()

Impact: cleanup

This patch changes find_early_table_space() to use roundup() for rounding up
tables to page size to unify the common parts of the 32-bit and 64-bit
implementations.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236077705.2675.6.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 5b06a2f5dea..1dd6b6334dc 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -845,10 +845,10 @@ static void __init find_early_table_space(unsigned long end, int use_pse)
 	unsigned long puds, pmds, ptes, tables, start;
 
 	puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
-	tables = PAGE_ALIGN(puds * sizeof(pud_t));
+	tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
 
 	pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
-	tables += PAGE_ALIGN(pmds * sizeof(pmd_t));
+	tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
 
 	if (use_pse) {
 		unsigned long extra;
@@ -859,10 +859,10 @@ static void __init find_early_table_space(unsigned long end, int use_pse)
 	} else
 		ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
-	tables += PAGE_ALIGN(ptes * sizeof(pte_t));
+	tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE);
 
 	/* for fixmap */
-	tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t));
+	tables += roundup(__end_of_fixed_addresses * sizeof(pte_t), PAGE_SIZE);
 
 	/*
 	 * RED-PEN putting page tables only on node 0 could
-- 
cgit v1.2.3


From 05f209e7b936a48e341d36831079116a06658ccc Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Tue, 3 Mar 2009 13:15:02 +0200
Subject: x86: add sanity checks to init_32.c

Impact: unification

This patch adds sanity checks that are already in init_64.c to init_32.c.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236078902.2675.16.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_32.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 1dd6b6334dc..1570a822c18 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -1214,18 +1214,21 @@ void mark_rodata_ro(void)
 
 void free_init_pages(char *what, unsigned long begin, unsigned long end)
 {
-#ifdef CONFIG_DEBUG_PAGEALLOC
+	unsigned long addr = begin;
+
+	if (addr >= end)
+		return;
+
 	/*
 	 * If debugging page accesses then do not free this memory but
 	 * mark them not present - any buggy init-section access will
 	 * create a kernel page fault:
 	 */
+#ifdef CONFIG_DEBUG_PAGEALLOC
 	printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
 		begin, PAGE_ALIGN(end));
 	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
 #else
-	unsigned long addr;
-
 	/*
 	 * We just marked the kernel text read only above, now that
 	 * we are going to free part of that, we need to make that
@@ -1233,14 +1236,16 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	 */
 	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
 
-	for (addr = begin; addr < end; addr += PAGE_SIZE) {
+	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
+
+	for (; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
-		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
+		memset((void *)(addr & ~(PAGE_SIZE-1)),
+			POISON_FREE_INITMEM, PAGE_SIZE);
 		free_page(addr);
 		totalram_pages++;
 	}
-	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
 #endif
 }
 
-- 
cgit v1.2.3


From e087edd8c056292191bb989baf49f83ee509e624 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Tue, 3 Mar 2009 13:15:04 +0200
Subject: x86: make sure initmem is writable on 64-bit

Impact: unification

This patch ports commit 3c1df68b848b39270752ff8d4b956cc4a4dce0f6 ("x86: make
sure initmem is writable") to the 64-bit version to unify implementations of
free_init_pages().

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <1236078904.2675.17.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index e6d36b49025..03da9030d0e 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -962,6 +962,13 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 		begin, PAGE_ALIGN(end));
 	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
 #else
+	/*
+	 * We just marked the kernel text read only above, now that
+	 * we are going to free part of that, we need to make that
+	 * writeable first.
+	 */
+	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
+
 	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
 
 	for (; addr < end; addr += PAGE_SIZE) {
-- 
cgit v1.2.3


From e5b2bb552706ca0e30795ee84caacbb37cec5705 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Tue, 3 Mar 2009 13:15:06 +0200
Subject: x86: unify free_init_pages() and free_initmem()

Impact: unification

This patch introduces a common arch/x86/mm/init.c and moves the identical
free_init_pages() and free_initmem() functions to the file.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236078906.2675.18.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/Makefile  |  2 +-
 arch/x86/mm/init.c    | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/init_32.c | 44 --------------------------------------------
 arch/x86/mm/init_64.c | 44 --------------------------------------------
 4 files changed, 50 insertions(+), 89 deletions(-)
 create mode 100644 arch/x86/mm/init.c

(limited to 'arch')

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 2b938a38491..08537747cb5 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,4 +1,4 @@
-obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
+obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o gup.o
 
 obj-$(CONFIG_SMP)		+= tlb.o
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
new file mode 100644
index 00000000000..ce6a722587d
--- /dev/null
+++ b/arch/x86/mm/init.c
@@ -0,0 +1,49 @@
+#include <linux/swap.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+	unsigned long addr = begin;
+
+	if (addr >= end)
+		return;
+
+	/*
+	 * If debugging page accesses then do not free this memory but
+	 * mark them not present - any buggy init-section access will
+	 * create a kernel page fault:
+	 */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
+		begin, PAGE_ALIGN(end));
+	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
+#else
+	/*
+	 * We just marked the kernel text read only above, now that
+	 * we are going to free part of that, we need to make that
+	 * writeable first.
+	 */
+	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
+
+	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
+
+	for (; addr < end; addr += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(addr));
+		init_page_count(virt_to_page(addr));
+		memset((void *)(addr & ~(PAGE_SIZE-1)),
+			POISON_FREE_INITMEM, PAGE_SIZE);
+		free_page(addr);
+		totalram_pages++;
+	}
+#endif
+}
+
+void free_initmem(void)
+{
+	free_init_pages("unused kernel memory",
+			(unsigned long)(&__init_begin),
+			(unsigned long)(&__init_end));
+}
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 1570a822c18..cd8d6732613 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -1212,50 +1212,6 @@ void mark_rodata_ro(void)
 }
 #endif
 
-void free_init_pages(char *what, unsigned long begin, unsigned long end)
-{
-	unsigned long addr = begin;
-
-	if (addr >= end)
-		return;
-
-	/*
-	 * If debugging page accesses then do not free this memory but
-	 * mark them not present - any buggy init-section access will
-	 * create a kernel page fault:
-	 */
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
-		begin, PAGE_ALIGN(end));
-	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
-#else
-	/*
-	 * We just marked the kernel text read only above, now that
-	 * we are going to free part of that, we need to make that
-	 * writeable first.
-	 */
-	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
-
-	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
-
-	for (; addr < end; addr += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(addr));
-		init_page_count(virt_to_page(addr));
-		memset((void *)(addr & ~(PAGE_SIZE-1)),
-			POISON_FREE_INITMEM, PAGE_SIZE);
-		free_page(addr);
-		totalram_pages++;
-	}
-#endif
-}
-
-void free_initmem(void)
-{
-	free_init_pages("unused kernel memory",
-			(unsigned long)(&__init_begin),
-			(unsigned long)(&__init_end));
-}
-
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 03da9030d0e..aae87456d93 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -945,50 +945,6 @@ void __init mem_init(void)
 		initsize >> 10);
 }
 
-void free_init_pages(char *what, unsigned long begin, unsigned long end)
-{
-	unsigned long addr = begin;
-
-	if (addr >= end)
-		return;
-
-	/*
-	 * If debugging page accesses then do not free this memory but
-	 * mark them not present - any buggy init-section access will
-	 * create a kernel page fault:
-	 */
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
-		begin, PAGE_ALIGN(end));
-	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
-#else
-	/*
-	 * We just marked the kernel text read only above, now that
-	 * we are going to free part of that, we need to make that
-	 * writeable first.
-	 */
-	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
-
-	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
-
-	for (; addr < end; addr += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(addr));
-		init_page_count(virt_to_page(addr));
-		memset((void *)(addr & ~(PAGE_SIZE-1)),
-			POISON_FREE_INITMEM, PAGE_SIZE);
-		free_page(addr);
-		totalram_pages++;
-	}
-#endif
-}
-
-void free_initmem(void)
-{
-	free_init_pages("unused kernel memory",
-			(unsigned long)(&__init_begin),
-			(unsigned long)(&__init_end));
-}
-
 #ifdef CONFIG_DEBUG_RODATA
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
-- 
cgit v1.2.3


From 867c5b5292583b1e474cbbcb4c77f09bfca3903c Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Tue, 3 Mar 2009 14:10:12 +0200
Subject: x86: set_highmem_pages_init() cleanup

Impact: cleanup

This patch moves set_highmem_pages_init() to arch/x86/mm/highmem_32.c.

The declaration of the function is kept in asm/numa_32.h because
asm/highmem.h is included only if CONFIG_HIGHMEM is enabled so we
can't put the empty static inline function there.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236082212.2675.24.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/numa_32.h |  6 +++++-
 arch/x86/mm/highmem_32.c       | 34 ++++++++++++++++++++++++++++++++++
 arch/x86/mm/init_32.c          | 12 ------------
 arch/x86/mm/numa_32.c          | 26 --------------------------
 4 files changed, 39 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/numa_32.h b/arch/x86/include/asm/numa_32.h
index e9f5db79624..a37229011b5 100644
--- a/arch/x86/include/asm/numa_32.h
+++ b/arch/x86/include/asm/numa_32.h
@@ -4,8 +4,12 @@
 extern int pxm_to_nid(int pxm);
 extern void numa_remove_cpu(int cpu);
 
-#ifdef CONFIG_NUMA
+#ifdef CONFIG_HIGHMEM
 extern void set_highmem_pages_init(void);
+#else
+static inline void set_highmem_pages_init(void)
+{
+}
 #endif
 
 #endif /* _ASM_X86_NUMA_32_H */
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index bcc079c282d..13a823cf564 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -1,5 +1,6 @@
 #include <linux/highmem.h>
 #include <linux/module.h>
+#include <linux/swap.h> /* for totalram_pages */
 
 void *kmap(struct page *page)
 {
@@ -156,3 +157,36 @@ EXPORT_SYMBOL(kmap);
 EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
+
+#ifdef CONFIG_NUMA
+void __init set_highmem_pages_init(void)
+{
+	struct zone *zone;
+	int nid;
+
+	for_each_zone(zone) {
+		unsigned long zone_start_pfn, zone_end_pfn;
+
+		if (!is_highmem(zone))
+			continue;
+
+		zone_start_pfn = zone->zone_start_pfn;
+		zone_end_pfn = zone_start_pfn + zone->spanned_pages;
+
+		nid = zone_to_nid(zone);
+		printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
+				zone->name, nid, zone_start_pfn, zone_end_pfn);
+
+		add_highpages_with_active_regions(nid, zone_start_pfn,
+				 zone_end_pfn);
+	}
+	totalram_pages += totalhigh_pages;
+}
+#else
+static void __init set_highmem_pages_init(void)
+{
+	add_highpages_with_active_regions(0, highstart_pfn, highend_pfn);
+
+	totalram_pages += totalhigh_pages;
+}
+#endif /* CONFIG_NUMA */
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index cd8d6732613..0b087dcd2c1 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -467,22 +467,10 @@ void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn,
 	work_with_active_regions(nid, add_highpages_work_fn, &data);
 }
 
-#ifndef CONFIG_NUMA
-static void __init set_highmem_pages_init(void)
-{
-	add_highpages_with_active_regions(0, highstart_pfn, highend_pfn);
-
-	totalram_pages += totalhigh_pages;
-}
-#endif /* !CONFIG_NUMA */
-
 #else
 static inline void permanent_kmaps_init(pgd_t *pgd_base)
 {
 }
-static inline void set_highmem_pages_init(void)
-{
-}
 #endif /* CONFIG_HIGHMEM */
 
 void __init native_pagetable_setup_start(pgd_t *base)
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index d1f7439d173..a04092a8acc 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -423,32 +423,6 @@ void __init initmem_init(unsigned long start_pfn,
 	setup_bootmem_allocator();
 }
 
-void __init set_highmem_pages_init(void)
-{
-#ifdef CONFIG_HIGHMEM
-	struct zone *zone;
-	int nid;
-
-	for_each_zone(zone) {
-		unsigned long zone_start_pfn, zone_end_pfn;
-
-		if (!is_highmem(zone))
-			continue;
-
-		zone_start_pfn = zone->zone_start_pfn;
-		zone_end_pfn = zone_start_pfn + zone->spanned_pages;
-
-		nid = zone_to_nid(zone);
-		printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
-				zone->name, nid, zone_start_pfn, zone_end_pfn);
-
-		add_highpages_with_active_regions(nid, zone_start_pfn,
-				 zone_end_pfn);
-	}
-	totalram_pages += totalhigh_pages;
-#endif
-}
-
 #ifdef CONFIG_MEMORY_HOTPLUG
 static int paddr_to_nid(u64 addr)
 {
-- 
cgit v1.2.3


From 6d831c6554e4f95083919914955a1a3a4a6acfa9 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Mon, 2 Mar 2009 21:27:38 +0100
Subject: [ARM] 5414/2: ep93xx m2p dma core

Add m2p dma support to the ep93xx

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/Makefile                   |   2 +-
 arch/arm/mach-ep93xx/dma-m2p.c                  | 408 ++++++++++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/dma.h         |  52 +++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |   3 +-
 4 files changed, 463 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-ep93xx/dma-m2p.c
 create mode 100644 arch/arm/mach-ep93xx/include/mach/dma.h

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 944e42d5164..9522e205b73 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o gpio.o
+obj-y			:= core.o clock.o dma-m2p.o gpio.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
new file mode 100644
index 00000000000..a2df5bb7dff
--- /dev/null
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -0,0 +1,408 @@
+/*
+ * arch/arm/mach-ep93xx/dma-m2p.c
+ * M2P DMA handling for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * On the EP93xx chip the following peripherals my be allocated to the 10
+ * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
+ *
+ *	I2S	contains 3 Tx and 3 Rx DMA Channels
+ *	AAC	contains 3 Tx and 3 Rx DMA Channels
+ *	UART1	contains 1 Tx and 1 Rx DMA Channels
+ *	UART2	contains 1 Tx and 1 Rx DMA Channels
+ *	UART3	contains 1 Tx and 1 Rx DMA Channels
+ *	IrDA	contains 1 Tx and 1 Rx DMA Channels
+ *
+ * SSP and IDE use the Memory to Memory (M2M) channels and are not covered
+ * with this implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <mach/dma.h>
+#include <mach/hardware.h>
+
+#define M2P_CONTROL			0x00
+#define  M2P_CONTROL_STALL_IRQ_EN	(1 << 0)
+#define  M2P_CONTROL_NFB_IRQ_EN		(1 << 1)
+#define  M2P_CONTROL_ERROR_IRQ_EN	(1 << 3)
+#define  M2P_CONTROL_ENABLE		(1 << 4)
+#define M2P_INTERRUPT			0x04
+#define  M2P_INTERRUPT_STALL		(1 << 0)
+#define  M2P_INTERRUPT_NFB		(1 << 1)
+#define  M2P_INTERRUPT_ERROR		(1 << 3)
+#define M2P_PPALLOC			0x08
+#define M2P_STATUS			0x0c
+#define M2P_REMAIN			0x14
+#define M2P_MAXCNT0			0x20
+#define M2P_BASE0			0x24
+#define M2P_MAXCNT1			0x30
+#define M2P_BASE1			0x34
+
+#define STATE_IDLE	0	/* Channel is inactive.  */
+#define STATE_STALL	1	/* Channel is active, no buffers pending.  */
+#define STATE_ON	2	/* Channel is active, one buffer pending.  */
+#define STATE_NEXT	3	/* Channel is active, two buffers pending.  */
+
+struct m2p_channel {
+	char				*name;
+	void __iomem			*base;
+	int				irq;
+
+	struct clk			*clk;
+	spinlock_t			lock;
+
+	void				*client;
+	unsigned			next_slot:1;
+	struct ep93xx_dma_buffer	*buffer_xfer;
+	struct ep93xx_dma_buffer	*buffer_next;
+	struct list_head		buffers_pending;
+};
+
+static struct m2p_channel m2p_rx[] = {
+	{"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1},
+	{"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3},
+	{"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5},
+	{"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7},
+	{"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9},
+	{NULL},
+};
+
+static struct m2p_channel m2p_tx[] = {
+	{"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0},
+	{"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2},
+	{"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4},
+	{"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6},
+	{"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8},
+	{NULL},
+};
+
+static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf)
+{
+	if (ch->next_slot == 0) {
+		writel(buf->size, ch->base + M2P_MAXCNT0);
+		writel(buf->bus_addr, ch->base + M2P_BASE0);
+	} else {
+		writel(buf->size, ch->base + M2P_MAXCNT1);
+		writel(buf->bus_addr, ch->base + M2P_BASE1);
+	}
+	ch->next_slot ^= 1;
+}
+
+static void choose_buffer_xfer(struct m2p_channel *ch)
+{
+	struct ep93xx_dma_buffer *buf;
+
+	ch->buffer_xfer = NULL;
+	if (!list_empty(&ch->buffers_pending)) {
+		buf = list_entry(ch->buffers_pending.next,
+				 struct ep93xx_dma_buffer, list);
+		list_del(&buf->list);
+		feed_buf(ch, buf);
+		ch->buffer_xfer = buf;
+	}
+}
+
+static void choose_buffer_next(struct m2p_channel *ch)
+{
+	struct ep93xx_dma_buffer *buf;
+
+	ch->buffer_next = NULL;
+	if (!list_empty(&ch->buffers_pending)) {
+		buf = list_entry(ch->buffers_pending.next,
+				 struct ep93xx_dma_buffer, list);
+		list_del(&buf->list);
+		feed_buf(ch, buf);
+		ch->buffer_next = buf;
+	}
+}
+
+static inline void m2p_set_control(struct m2p_channel *ch, u32 v)
+{
+	/*
+	 * The control register must be read immediately after being written so
+	 * that the internal state machine is correctly updated. See the ep93xx
+	 * users' guide for details.
+	 */
+	writel(v, ch->base + M2P_CONTROL);
+	readl(ch->base + M2P_CONTROL);
+}
+
+static inline int m2p_channel_state(struct m2p_channel *ch)
+{
+	return (readl(ch->base + M2P_STATUS) >> 4) & 0x3;
+}
+
+static irqreturn_t m2p_irq(int irq, void *dev_id)
+{
+	struct m2p_channel *ch = dev_id;
+	struct ep93xx_dma_m2p_client *cl;
+	u32 irq_status, v;
+	int error = 0;
+
+	cl = ch->client;
+
+	spin_lock(&ch->lock);
+	irq_status = readl(ch->base + M2P_INTERRUPT);
+
+	if (irq_status & M2P_INTERRUPT_ERROR) {
+		writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT);
+		error = 1;
+	}
+
+	if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) {
+		spin_unlock(&ch->lock);
+		return IRQ_NONE;
+	}
+
+	switch (m2p_channel_state(ch)) {
+	case STATE_IDLE:
+		pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+		BUG();
+		break;
+
+	case STATE_STALL:
+		cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+		if (ch->buffer_next != NULL) {
+			cl->buffer_finished(cl->cookie, ch->buffer_next,
+					    0, error);
+		}
+		choose_buffer_xfer(ch);
+		choose_buffer_next(ch);
+		if (ch->buffer_xfer != NULL)
+			cl->buffer_started(cl->cookie, ch->buffer_xfer);
+		break;
+
+	case STATE_ON:
+		cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+		ch->buffer_xfer = ch->buffer_next;
+		choose_buffer_next(ch);
+		cl->buffer_started(cl->cookie, ch->buffer_xfer);
+		break;
+
+	case STATE_NEXT:
+		pr_crit("m2p_irq: dma interrupt while next\n");
+		BUG();
+		break;
+	}
+
+	v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN |
+					      M2P_CONTROL_NFB_IRQ_EN);
+	if (ch->buffer_xfer != NULL)
+		v |= M2P_CONTROL_STALL_IRQ_EN;
+	if (ch->buffer_next != NULL)
+		v |= M2P_CONTROL_NFB_IRQ_EN;
+	m2p_set_control(ch, v);
+
+	spin_unlock(&ch->lock);
+	return IRQ_HANDLED;
+}
+
+static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch;
+	int i;
+
+	if (cl->flags & EP93XX_DMA_M2P_RX)
+		ch = m2p_rx;
+	else
+		ch = m2p_tx;
+
+	for (i = 0; ch[i].base; i++) {
+		struct ep93xx_dma_m2p_client *client;
+
+		client = ch[i].client;
+		if (client != NULL) {
+			int port;
+
+			port = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+			if (port == (client->flags &
+				     EP93XX_DMA_M2P_PORT_MASK)) {
+				pr_warning("DMA channel already used by %s\n",
+					   cl->name ? : "unknown client");
+				return ERR_PTR(-EBUSY);
+			}
+		}
+	}
+
+	for (i = 0; ch[i].base; i++) {
+		if (ch[i].client == NULL)
+			return ch + i;
+	}
+
+	pr_warning("No free DMA channel for %s\n",
+		   cl->name ? : "unknown client");
+	return ERR_PTR(-ENODEV);
+}
+
+static void channel_enable(struct m2p_channel *ch)
+{
+	struct ep93xx_dma_m2p_client *cl = ch->client;
+	u32 v;
+
+	clk_enable(ch->clk);
+
+	v = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+	writel(v, ch->base + M2P_PPALLOC);
+
+	v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK;
+	v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN;
+	m2p_set_control(ch, v);
+}
+
+static void channel_disable(struct m2p_channel *ch)
+{
+	u32 v;
+
+	v = readl(ch->base + M2P_CONTROL);
+	v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
+	m2p_set_control(ch, v);
+
+	while (m2p_channel_state(ch) == STATE_ON)
+		cpu_relax();
+
+	m2p_set_control(ch, 0x0);
+
+	while (m2p_channel_state(ch) == STATE_STALL)
+		cpu_relax();
+
+	clk_disable(ch->clk);
+}
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch;
+	int err;
+
+	ch = find_free_channel(cl);
+	if (IS_ERR(ch))
+		return PTR_ERR(ch);
+
+	err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch);
+	if (err)
+		return err;
+
+	ch->client = cl;
+	ch->next_slot = 0;
+	ch->buffer_xfer = NULL;
+	ch->buffer_next = NULL;
+	INIT_LIST_HEAD(&ch->buffers_pending);
+
+	cl->channel = ch;
+
+	channel_enable(ch);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register);
+
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch = cl->channel;
+
+	channel_disable(ch);
+	free_irq(ch->irq, ch);
+	ch->client = NULL;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister);
+
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl,
+			   struct ep93xx_dma_buffer *buf)
+{
+	struct m2p_channel *ch = cl->channel;
+	unsigned long flags;
+	u32 v;
+
+	spin_lock_irqsave(&ch->lock, flags);
+	v = readl(ch->base + M2P_CONTROL);
+	if (ch->buffer_xfer == NULL) {
+		ch->buffer_xfer = buf;
+		feed_buf(ch, buf);
+		cl->buffer_started(cl->cookie, buf);
+
+		v |= M2P_CONTROL_STALL_IRQ_EN;
+		m2p_set_control(ch, v);
+
+	} else if (ch->buffer_next == NULL) {
+		ch->buffer_next = buf;
+		feed_buf(ch, buf);
+
+		v |= M2P_CONTROL_NFB_IRQ_EN;
+		m2p_set_control(ch, v);
+	} else {
+		list_add_tail(&buf->list, &ch->buffers_pending);
+	}
+	spin_unlock_irqrestore(&ch->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit);
+
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl,
+				     struct ep93xx_dma_buffer *buf)
+{
+	struct m2p_channel *ch = cl->channel;
+
+	list_add_tail(&buf->list, &ch->buffers_pending);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive);
+
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl)
+{
+	struct m2p_channel *ch = cl->channel;
+
+	channel_disable(ch);
+	ch->next_slot = 0;
+	ch->buffer_xfer = NULL;
+	ch->buffer_next = NULL;
+	INIT_LIST_HEAD(&ch->buffers_pending);
+	channel_enable(ch);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush);
+
+static int init_channel(struct m2p_channel *ch)
+{
+	ch->clk = clk_get(NULL, ch->name);
+	if (IS_ERR(ch->clk))
+		return PTR_ERR(ch->clk);
+
+	spin_lock_init(&ch->lock);
+	ch->client = NULL;
+
+	return 0;
+}
+
+static int __init ep93xx_dma_m2p_init(void)
+{
+	int i;
+	int ret;
+
+	for (i = 0; m2p_rx[i].base; i++) {
+		ret = init_channel(m2p_rx + i);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; m2p_tx[i].base; i++) {
+		ret = init_channel(m2p_tx + i);
+		if (ret)
+			return ret;
+	}
+
+	pr_info("M2P DMA subsystem initialized\n");
+	return 0;
+}
+arch_initcall(ep93xx_dma_m2p_init);
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 00000000000..ef6bd9d1314
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct ep93xx_dma_buffer {
+	struct list_head	list;
+	u32			bus_addr;
+	u16			size;
+};
+
+struct ep93xx_dma_m2p_client {
+	char			*name;
+	u8			flags;
+	void			*cookie;
+	void			(*buffer_started)(void *cookie,
+					struct ep93xx_dma_buffer *buf);
+	void			(*buffer_finished)(void *cookie,
+					struct ep93xx_dma_buffer *buf,
+					int bytes, int error);
+
+	/* Internal to the DMA code.  */
+	void			*channel;
+};
+
+#define EP93XX_DMA_M2P_PORT_I2S1	0x00
+#define EP93XX_DMA_M2P_PORT_I2S2	0x01
+#define EP93XX_DMA_M2P_PORT_AAC1	0x02
+#define EP93XX_DMA_M2P_PORT_AAC2	0x03
+#define EP93XX_DMA_M2P_PORT_AAC3	0x04
+#define EP93XX_DMA_M2P_PORT_I2S3	0x05
+#define EP93XX_DMA_M2P_PORT_UART1	0x06
+#define EP93XX_DMA_M2P_PORT_UART2	0x07
+#define EP93XX_DMA_M2P_PORT_UART3	0x08
+#define EP93XX_DMA_M2P_PORT_IRDA	0x09
+#define EP93XX_DMA_M2P_PORT_MASK	0x0f
+#define EP93XX_DMA_M2P_TX		0x00
+#define EP93XX_DMA_M2P_RX		0x10
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20
+#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40
+#define EP93XX_DMA_M2P_ERROR_MASK	0x60
+
+int  ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
+			   struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
+				     struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 22d6c9a6e4c..f66be12b856 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -58,7 +58,8 @@
 
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
+#define EP93XX_DMA_BASE			((void __iomem *)		\
+					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
 
 #define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
-- 
cgit v1.2.3


From 4da3782151300237db3abe070f716922889252e0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 24 Feb 2009 12:46:31 +0000
Subject: [ARM] omap: clk_set_parent: deny changing parent if clock is enabled

Richard Woodruff writes:
| The historic usage of this has been against single use leaf clocks
| (1st instance of gptimer).  When it was used it did:
|       clk_get()
|       clk_set_parent()
|       clk_enable()
|
| This usage was ok for that. Use on a disabled clock is needed.
|
| If there are multiple users on the clock or it is enabled there are
| problems.
|
| The call can still be unfriendly if 2 different drivers are using the
| clock with their own clock get/enable. It might be the function should
| return an error if usecount != 0 to stop surprises.  It is all around
| better if the parenting is done when the clock is off.

This is a good reason to ensure that the clock is not enabled when
clk_set_parent() is called.

Acked-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/clock.c |  6 ------
 arch/arm/plat-omap/clock.c  | 17 ++++++++++-------
 2 files changed, 10 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 40cb65ba1fa..f49bce997a0 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -807,9 +807,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	if (!parent_div)
 		return -EINVAL;
 
-	if (clk->usecount > 0)
-		_omap2_clk_disable(clk);
-
 	/* Set new source value (previous dividers if any in effect) */
 	v = __raw_readl(clk->clksel_reg);
 	v &= ~clk->clksel_mask;
@@ -819,9 +816,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 
 	_omap2xxx_clk_commit(clk);
 
-	if (clk->usecount > 0)
-		_omap2_clk_enable(clk);
-
 	clk_reparent(clk, new_parent);
 
 	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 08baa18497b..2e0614552ac 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -144,13 +144,16 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return ret;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	if (arch_clock->clk_set_parent)
-		ret = arch_clock->clk_set_parent(clk, parent);
-	if (ret == 0) {
-		if (clk->recalc)
-			clk->rate = clk->recalc(clk);
-		propagate_rate(clk);
-	}
+	if (clk->usecount == 0) {
+		if (arch_clock->clk_set_parent)
+			ret = arch_clock->clk_set_parent(clk, parent);
+		if (ret == 0) {
+			if (clk->recalc)
+				clk->rate = clk->recalc(clk);
+			propagate_rate(clk);
+		}
+	} else
+		ret = -EBUSY;
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return ret;
-- 
cgit v1.2.3


From 03787ceed8f7bf06af29f3b213017d89f8e9423d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 3 Mar 2009 15:32:24 +0100
Subject: x86: set_highmem_pages_init() cleanup, fix !CONFIG_NUMA &&
 CONFIG_HIGHMEM=y

Impact: build fix

 arch/x86/mm/highmem_32.c:187: error: static declaration of 'set_highmem_pages_init' follows non-static declaration
 arch/x86/include/asm/numa_32.h:8: error: previous declaration of 'set_highmem_pages_init' was here

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1236082212.2675.24.camel@penberg-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/highmem_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 13a823cf564..00f127c80b0 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -183,7 +183,7 @@ void __init set_highmem_pages_init(void)
 	totalram_pages += totalhigh_pages;
 }
 #else
-static void __init set_highmem_pages_init(void)
+void __init set_highmem_pages_init(void)
 {
 	add_highpages_with_active_regions(0, highstart_pfn, highend_pfn);
 
-- 
cgit v1.2.3


From 4e8304758cc09a6097dbd2c4f44a5369e5c1edb0 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 3 Mar 2009 11:51:39 -0800
Subject: x86: remove vestigial fix_ioremap prototypes

The function seems to have disappeared at some point, leaving
some vestigial prototypes behind...

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/io.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 683d0b4c00f..e5383e3d2f8 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -172,8 +172,6 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
 
 extern void iounmap(volatile void __iomem *addr);
 
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
 
 #ifdef CONFIG_X86_32
 # include "io_32.h"
@@ -198,7 +196,6 @@ extern void early_ioremap_reset(void);
 extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
 extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
 extern void early_iounmap(void __iomem *addr, unsigned long size);
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 
 #define IO_SPACE_LIMIT 0xffff
 
-- 
cgit v1.2.3


From f254f3909efaf59ca2d0f408de2d044dace60706 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 3 Mar 2009 12:02:57 -0800
Subject: x86: un-__init fill_pud/pmd/pte

They are used by __set_fixmap->set_pte_vaddr_pud, which can
be used by arch_setup_additional_pages(), and so is used
after init.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 11981fc8570..07f44d491df 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -168,7 +168,7 @@ static __ref void *spp_getpage(void)
 	return ptr;
 }
 
-static pud_t * __init fill_pud(pgd_t *pgd, unsigned long vaddr)
+static pud_t *fill_pud(pgd_t *pgd, unsigned long vaddr)
 {
 	if (pgd_none(*pgd)) {
 		pud_t *pud = (pud_t *)spp_getpage();
@@ -180,7 +180,7 @@ static pud_t * __init fill_pud(pgd_t *pgd, unsigned long vaddr)
 	return pud_offset(pgd, vaddr);
 }
 
-static pmd_t * __init fill_pmd(pud_t *pud, unsigned long vaddr)
+static pmd_t *fill_pmd(pud_t *pud, unsigned long vaddr)
 {
 	if (pud_none(*pud)) {
 		pmd_t *pmd = (pmd_t *) spp_getpage();
@@ -192,7 +192,7 @@ static pmd_t * __init fill_pmd(pud_t *pud, unsigned long vaddr)
 	return pmd_offset(pud, vaddr);
 }
 
-static pte_t * __init fill_pte(pmd_t *pmd, unsigned long vaddr)
+static pte_t *fill_pte(pmd_t *pmd, unsigned long vaddr)
 {
 	if (pmd_none(*pmd)) {
 		pte_t *pte = (pte_t *) spp_getpage();
-- 
cgit v1.2.3


From 693599438909de47fbfa4246bf67d6c535f719b5 Mon Sep 17 00:00:00 2001
From: Riku Voipio <riku.voipio@iki.fi>
Date: Tue, 3 Mar 2009 21:13:50 +0200
Subject: [ARM] mv78xx0: wire i2c support

All the pieces were ready, just matter of assembling
them together.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-mv78xx0/common.c               | 76 ++++++++++++++++++++++++++++
 arch/arm/mach-mv78xx0/common.h               |  1 +
 arch/arm/mach-mv78xx0/db78x00-bp-setup.c     |  8 +++
 arch/arm/mach-mv78xx0/include/mach/mv78xx0.h |  2 +
 4 files changed, 87 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 15f9913f4a9..a575daaa62d 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/ethtool.h>
 #include <asm/mach/map.h>
@@ -518,6 +519,81 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 	platform_device_register(&mv78xx0_ge11);
 }
 
+/*****************************************************************************
+ * I2C bus 0
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_0_resources[] = {
+	{
+		.name   = "i2c 0 base",
+		.start  = I2C_0_PHYS_BASE,
+		.end    = I2C_0_PHYS_BASE + 0x1f,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "i2c 0 irq",
+		.start  = IRQ_MV78XX0_I2C_0,
+		.end    = IRQ_MV78XX0_I2C_0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct platform_device mv78xx0_i2c_0 = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv78xx0_i2c_0_resources),
+	.resource	= mv78xx0_i2c_0_resources,
+	.dev		= {
+		.platform_data	= &mv78xx0_i2c_0_pdata,
+	},
+};
+
+/*****************************************************************************
+ * I2C bus 1
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_1_resources[] = {
+	{
+		.name   = "i2c 1 base",
+		.start  = I2C_1_PHYS_BASE,
+		.end    = I2C_1_PHYS_BASE + 0x1f,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name   = "i2c 1 irq",
+		.start  = IRQ_MV78XX0_I2C_1,
+		.end    = IRQ_MV78XX0_I2C_1,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct platform_device mv78xx0_i2c_1 = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(mv78xx0_i2c_1_resources),
+	.resource	= mv78xx0_i2c_1_resources,
+	.dev		= {
+		.platform_data	= &mv78xx0_i2c_1_pdata,
+	},
+};
+
+void __init mv78xx0_i2c_init(void)
+{
+	platform_device_register(&mv78xx0_i2c_0);
+	platform_device_register(&mv78xx0_i2c_1);
+}
 
 /*****************************************************************************
  * SATA
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index f6274db6192..befc2247546 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -44,6 +44,7 @@ void mv78xx0_uart0_init(void);
 void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
+void mv78xx0_i2c_init(void);
 
 extern struct sys_timer mv78xx0_timer;
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index be0a59a6139..efdabe04c69 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -14,6 +14,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/i2c.h>
 #include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +40,11 @@ static struct mv_sata_platform_data db78x00_sata_data = {
 	.n_ports	= 2,
 };
 
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
 static void __init db78x00_init(void)
 {
 	/*
@@ -60,6 +66,8 @@ static void __init db78x00_init(void)
 		mv78xx0_sata_init(&db78x00_sata_data);
 		mv78xx0_uart0_init();
 		mv78xx0_uart2_init();
+		mv78xx0_i2c_init();
+		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
 	} else {
 		mv78xx0_uart1_init();
 		mv78xx0_uart3_init();
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 328a02e029a..582cffc733a 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -102,6 +102,8 @@
 #define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
 #define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
 #define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
 #define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-- 
cgit v1.2.3


From 195f4a170eaeb8ef37c73e02adef2579168e9287 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Wed, 4 Mar 2009 21:30:51 +0000
Subject: [ARM] orion5x: added a new FPGA ID set for the TS-78xx

Stefan Agner found his board comes with 0x00b480/0x02 but the main
board also has Rev B printed on it like my 0x00b480/0x03.  Some light
enum renaming was needed but it was to be expected.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/ts78xx-fpga.h  | 3 ++-
 arch/arm/mach-orion5x/ts78xx-setup.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index e2c503c7807..0a314ddef65 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -6,7 +6,8 @@
  */
 enum fpga_ids {
 	/* Technologic Systems */
-	TS7800_REV_B = FPGAID(0x00b480, 0x03),
+	TS7800_REV_B2 = FPGAID(0x00b480, 0x02),
+	TS7800_REV_B3 = FPGAID(0x00b480, 0x03),
 };
 
 struct fpga_device {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index a6eec4e4942..f5191ddea08 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -282,7 +282,8 @@ static void ts78xx_fpga_supports(void)
 {
 	/* TODO: put this 'table' into ts78xx-fpga.h */
 	switch (ts78xx_fpga.id) {
-	case TS7800_REV_B:
+	case TS7800_REV_B2:
+	case TS7800_REV_B3:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
 		break;
-- 
cgit v1.2.3


From 36e8abf3edcd2d207193ec5741d1a2a645d470a5 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Thu, 5 Mar 2009 00:16:26 -0500
Subject: [CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand
 governor.

The latency of p4-clockmod sucks so hard that scaling on a regular
basis with ondemand is a really bad idea.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 1778402305e..352cf9a4916 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -246,7 +246,10 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 	cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
 
 	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 1000000; /* assumed */
+
+	/* the transition latency is set to be 1 higher than the maximum
+	 * transition latency of the ondemand governor */
+	policy->cpuinfo.transition_latency = 10000001;
 	policy->cur = stock_freq;
 
 	return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
-- 
cgit v1.2.3


From 929ef1a1f566087e4b362e3a56c50bf9db30e3c5 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 5 Mar 2009 17:37:12 +0900
Subject: sh: urquell: Add smc91x support and update defconfig accordingly.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-urquell.c    |  34 ++
 arch/sh/configs/urquell_defconfig | 926 +++++++++++++++++++++++++++++++++++---
 2 files changed, 896 insertions(+), 64 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index d5caeabf46e..17036ce2008 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/smc91x.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
@@ -42,6 +43,32 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x05800300,
+		.end    = 0x0580030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 11,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
 static struct mtd_partition nor_flash_partitions[] = {
 	{
 		.name		= "loader",
@@ -92,6 +119,7 @@ static struct platform_device nor_flash_device = {
 
 static struct platform_device *urquell_devices[] __initdata = {
 	&heartbeat_device,
+	&smc91x_eth_device,
 	&nor_flash_device,
 };
 
@@ -111,6 +139,11 @@ static void urquell_power_off(void)
 	__raw_writew(0xa5a5, UBOARDREG(SRSTR));
 }
 
+static void __init urquell_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
+
 /* Initialize the board */
 static void __init urquell_setup(char **cmdline_p)
 {
@@ -125,4 +158,5 @@ static void __init urquell_setup(char **cmdline_p)
 static struct sh_machine_vector mv_urquell __initmv = {
 	.mv_name	= "Urquell",
 	.mv_setup	= urquell_setup,
+	.mv_init_irq	= urquell_init_irq,
 };
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index 94a4bdbd1bc..be726c7cdf9 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.29-rc4
-# Tue Mar  3 16:20:09 2009
+# Thu Mar  5 17:28:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -29,13 +30,20 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 # General setup
 #
-# CONFIG_EXPERIMENTAL is not set
+CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 
 #
 # RCU Subsystem
@@ -45,45 +53,82 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_RCU is not set
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_PRINTK is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-# CONFIG_BLOCK is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_FREEZER is not set
 
 #
@@ -135,9 +180,11 @@ CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
-CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -158,6 +205,7 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
@@ -180,7 +228,7 @@ CONFIG_CACHE_WRITEBACK=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_SH_STORE_QUEUES=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_FPU=y
@@ -195,9 +243,9 @@ CONFIG_SH_URQUELL=y
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
-CONFIG_SH_PCLK_FREQ=31250000
+CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
+# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
@@ -230,9 +278,12 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 
 #
@@ -240,20 +291,116 @@ CONFIG_GUSA=y
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m"
 
 #
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_NET is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -262,25 +409,39 @@ CONFIG_BINFMT_ELF=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 # CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
 CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -294,7 +455,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=y
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -315,6 +476,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
@@ -336,20 +498,176 @@ CONFIG_MTD_PHYSMAP=y
 #
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-# CONFIG_SCSI_DMA is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -360,8 +678,12 @@ CONFIG_HAVE_IDE=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -377,15 +699,64 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
-# CONFIG_I2C is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # Memory mapped GPIO expanders:
@@ -394,6 +765,9 @@ CONFIG_GPIOLIB=y
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -419,9 +793,16 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
+CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -432,6 +813,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
 # CONFIG_VIDEO_MEDIA is not set
 
 #
@@ -444,15 +826,202 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -465,38 +1034,171 @@ CONFIG_SSB_POSSIBLE=y
 #
 # File systems
 #
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
 #
 # Pseudo filesystems
 #
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NLS is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -504,6 +1206,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 #
 # Tracers
 #
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
@@ -514,21 +1217,116 @@ CONFIG_HAVE_ARCH_KGDB=y
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From a4b1fddcd40f10820fbc123d4d02cd62eeef476c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 5 Mar 2009 17:52:34 +0900
Subject: sh: Set a sensible default for the SH7786 pclk.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 83aee3db54b..a4c2c845863 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -466,7 +466,8 @@ config SH_PCLK_FREQ
 	default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
-			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
+			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG    || \
+			      CPU_SUBTYPE_SH7786
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
-- 
cgit v1.2.3


From 8150bc886be5ce3cc301a2baca1fcf2cf7bd7f39 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Wed, 4 Mar 2009 00:49:26 +0000
Subject: S3C24XX: Move and update IIS headers

Move the IIS headers to their correct place.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c2410/dma.c                       |  2 +-
 arch/arm/mach-s3c2410/include/mach/hardware.h     |  3 -
 arch/arm/mach-s3c2410/include/mach/io.h           |  2 +-
 arch/arm/mach-s3c2412/dma.c                       |  4 +-
 arch/arm/mach-s3c2440/dma.c                       |  2 +-
 arch/arm/mach-s3c2443/dma.c                       |  2 +-
 arch/arm/mach-shark/include/mach/io.h             |  2 +-
 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 72 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/clock-dclk.c                |  1 +
 arch/arm/plat-s3c24xx/include/plat/regs-iis.h     | 77 +++++++++++++++++++++++
 10 files changed, 157 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/regs-iis.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 552b4c778fd..440c014e24b 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a4024..db72beb61d7 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -131,7 +131,4 @@ extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
 
 /* machine specific hardware definitions should go after this */
 
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
index 9813dbf2ae4..c477771c092 100644
--- a/arch/arm/mach-s3c2410/include/mach/io.h
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
+#include <mach/map.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 919856c9433..9e3478506c6 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -29,8 +29,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-s3c2412-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 5b5ee0b8f4e..69b6cf34df4 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 2a58a4d5aa5..8430e582918 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -29,7 +29,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { \
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index c5cee829fc8..8ca7d7f09bd 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -14,7 +14,7 @@
 #define PCIO_BASE	0xe0000000
 #define IO_SPACE_LIMIT	0xffffffff
 
-#define __io(a)		((void __iomem *)(PCIO_BASE + (a)))
+#define __io(a)		__typesafe_io(PCIO_BASE + (a))
 #define __mem_pci(addr)	(addr)
 
 #endif
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
new file mode 100644
index 00000000000..25d4058bcfe
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -0,0 +1,72 @@
+/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+ *
+ * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
+#define __ASM_ARCH_REGS_S3C2412_IIS_H
+
+#define S3C2412_IISCON			(0x00)
+#define S3C2412_IISMOD			(0x04)
+#define S3C2412_IISFIC			(0x08)
+#define S3C2412_IISPSR			(0x0C)
+#define S3C2412_IISTXD			(0x10)
+#define S3C2412_IISRXD			(0x14)
+
+#define S3C2412_IISCON_LRINDEX		(1 << 11)
+#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
+#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
+#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
+#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
+#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
+#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
+#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
+#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
+#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
+#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
+#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
+
+#define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
+#define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
+#define S3C2412_IISMOD_SLAVE		(2 << 10)
+#define S3C2412_IISMOD_MASTER_MASK	(3 << 10)
+#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
+#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
+#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
+#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
+#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
+#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
+#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
+#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
+#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
+#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
+#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
+#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
+#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
+#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
+#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
+#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
+#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
+#define S3C2412_IISMOD_8BIT		(1 << 0)
+
+#define S3C2412_IISPSR_PSREN		(1 << 15)
+
+#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
+#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
+#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
+#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
+
+
+
+#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
+
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 5b75a797b5a..35219dcf9f0 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -18,6 +18,7 @@
 
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
+#include <mach/hardware.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
new file mode 100644
index 00000000000..a6f1d5df13b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h
@@ -0,0 +1,77 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON	 (0x00)
+
+#define S3C2410_IISCON_LRINDEX	  (1<<8)
+#define S3C2410_IISCON_TXFIFORDY  (1<<7)
+#define S3C2410_IISCON_RXFIFORDY  (1<<6)
+#define S3C2410_IISCON_TXDMAEN	  (1<<5)
+#define S3C2410_IISCON_RXDMAEN	  (1<<4)
+#define S3C2410_IISCON_TXIDLE	  (1<<3)
+#define S3C2410_IISCON_RXIDLE	  (1<<2)
+#define S3C2410_IISCON_PSCEN	  (1<<1)
+#define S3C2410_IISCON_IISEN	  (1<<0)
+
+#define S3C2410_IISMOD	 (0x04)
+
+#define S3C2440_IISMOD_MPLL	  (1<<9)
+#define S3C2410_IISMOD_SLAVE	  (1<<8)
+#define S3C2410_IISMOD_NOXFER	  (0<<6)
+#define S3C2410_IISMOD_RXMODE	  (1<<6)
+#define S3C2410_IISMOD_TXMODE	  (2<<6)
+#define S3C2410_IISMOD_TXRXMODE	  (3<<6)
+#define S3C2410_IISMOD_LR_LLOW	  (0<<5)
+#define S3C2410_IISMOD_LR_RLOW	  (1<<5)
+#define S3C2410_IISMOD_IIS	  (0<<4)
+#define S3C2410_IISMOD_MSB	  (1<<4)
+#define S3C2410_IISMOD_8BIT	  (0<<3)
+#define S3C2410_IISMOD_16BIT	  (1<<3)
+#define S3C2410_IISMOD_BITMASK	  (1<<3)
+#define S3C2410_IISMOD_256FS	  (0<<2)
+#define S3C2410_IISMOD_384FS	  (1<<2)
+#define S3C2410_IISMOD_16FS	  (0<<0)
+#define S3C2410_IISMOD_32FS	  (1<<0)
+#define S3C2410_IISMOD_48FS	  (2<<0)
+#define S3C2410_IISMOD_FS_MASK	  (3<<0)
+
+#define S3C2410_IISPSR		(0x08)
+#define S3C2410_IISPSR_INTMASK	(31<<5)
+#define S3C2410_IISPSR_INTSHIFT	(5)
+#define S3C2410_IISPSR_EXTMASK	(31<<0)
+#define S3C2410_IISPSR_EXTSHFIT	(0)
+
+#define S3C2410_IISFCON  (0x0c)
+
+#define S3C2410_IISFCON_TXDMA	  (1<<15)
+#define S3C2410_IISFCON_RXDMA	  (1<<14)
+#define S3C2410_IISFCON_TXENABLE  (1<<13)
+#define S3C2410_IISFCON_RXENABLE  (1<<12)
+#define S3C2410_IISFCON_TXMASK	  (0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT	  (6)
+#define S3C2410_IISFCON_RXMASK	  (0x3f)
+#define S3C2410_IISFCON_RXSHIFT	  (0)
+
+#define S3C2400_IISFCON_TXDMA     (1<<11)
+#define S3C2400_IISFCON_RXDMA     (1<<10)
+#define S3C2400_IISFCON_TXENABLE  (1<<9)
+#define S3C2400_IISFCON_RXENABLE  (1<<8)
+#define S3C2400_IISFCON_TXMASK	  (0x07 << 4)
+#define S3C2400_IISFCON_TXSHIFT	  (4)
+#define S3C2400_IISFCON_RXMASK	  (0x07)
+#define S3C2400_IISFCON_RXSHIFT	  (0)
+
+#define S3C2410_IISFIFO  (0x10)
+#endif /* __ASM_ARCH_REGS_IIS_H */
-- 
cgit v1.2.3


From 899e6cf5e6d83a91d2e257f7a4e8ca98db3831cc Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Wed, 4 Mar 2009 00:49:28 +0000
Subject: S3C: Move <mach/audio.h> to <plat/audio.h>

The <mach/audio.h> file needs to be common to both ARCH_S3C2410 and
ARCH_S3C64XX as they share common driver code, so move it to <plat/audio.h>.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c2410/include/mach/audio.h | 45 ------------------------------
 arch/arm/plat-s3c/include/plat/audio.h     | 45 ++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 45 deletions(-)
 delete mode 100644 arch/arm/mach-s3c2410/include/mach/audio.h
 create mode 100644 arch/arm/plat-s3c/include/plat/audio.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
deleted file mode 100644
index de0e8da48bc..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/audio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/audio.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
-
-struct s3c24xx_iis_ops {
-	struct module *owner;
-
-	int	(*startup)(struct s3c24xx_iis_ops *me);
-	void	(*shutdown)(struct s3c24xx_iis_ops *me);
-	int	(*suspend)(struct s3c24xx_iis_ops *me);
-	int	(*resume)(struct s3c24xx_iis_ops *me);
-
-	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
-};
-
-struct s3c24xx_platdata_iis {
-	const char		*codec_clk;
-	struct s3c24xx_iis_ops	*ops;
-	int			(*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-s3c/include/plat/audio.h
new file mode 100644
index 00000000000..de0e8da48bc
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/audio.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/include/mach/audio.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Audio platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_AUDIO_H
+#define __ASM_ARCH_AUDIO_H __FILE__
+
+/* struct s3c24xx_iis_ops
+ *
+ * called from the s3c24xx audio core to deal with the architecture
+ * or the codec's setup and control.
+ *
+ * the pointer to itself is passed through in case the caller wants to
+ * embed this in an larger structure for easy reference to it's context.
+*/
+
+struct s3c24xx_iis_ops {
+	struct module *owner;
+
+	int	(*startup)(struct s3c24xx_iis_ops *me);
+	void	(*shutdown)(struct s3c24xx_iis_ops *me);
+	int	(*suspend)(struct s3c24xx_iis_ops *me);
+	int	(*resume)(struct s3c24xx_iis_ops *me);
+
+	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+};
+
+struct s3c24xx_platdata_iis {
+	const char		*codec_clk;
+	struct s3c24xx_iis_ops	*ops;
+	int			(*match_dev)(struct device *dev);
+};
+
+#endif /* __ASM_ARCH_AUDIO_H */
-- 
cgit v1.2.3


From a6bc77241d79d39ad2ad8010a82ce7e0f437ae05 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 6 Mar 2009 05:06:27 +0000
Subject: sh: multiple vectors per irq - sh7763

Update intc tables and platform data to use one linux irq
per maskable interrupt source instead of keeping the one-to-one
mapping between vectors and linux irqs.

This fixes potential irq masking issues for sh7763 hardware
blocks such as RTC/SCIF/DMAC/GETHER/PCIC5/MMCIF/SIM/GPIO/USBF.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 113 +++++++++++----------------------
 1 file changed, 37 insertions(+), 76 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 3c5b629887a..14a916f0d75 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
- *  Copyright (C) 2008  Nobuhiro Iwamatsu
+ *  Copyright (C) 2008, 2009  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,18 +22,7 @@ static struct resource rtc_resources[] = {
 		.flags	= IORESOURCE_IO,
 	},
 	[1] = {
-		/* Period IRQ */
-		.start	= 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= 22,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
-		.start	= 20,
+		/* Shared Period/Carry/Alarm IRQ */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -50,17 +39,17 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xffe00000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 40, 41, 43, 42 },
+		.irqs		= { 40, 40, 40, 40 },
 	}, {
 		.mapbase	= 0xffe08000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 76, 77, 79, 78 },
+		.irqs		= { 76, 76, 76, 76 },
 	}, {
 		.mapbase	= 0xffe10000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 104, 105, 107, 106 },
+		.irqs		= { 104, 104, 104, 104 },
 	}, {
 		.flags = 0,
 	}
@@ -148,93 +137,65 @@ enum {
 	IRL_HHLL, IRL_HHLH, IRL_HHHL,
 
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
-	RTC_ATI, RTC_PRI, RTC_CUI,
-	WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
-	HUDI, LCDC,
-	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
-	DMAC0_DMINT4, DMAC0_DMINT5,
-	IIC0, IIC1,
-	CMT,
-	GEINT0, GEINT1, GEINT2,
-	HAC,
-	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
-	PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
-	STIF0, STIF1,
-	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
-	SIOF0, SIOF1, SIOF2,
-	USBH, USBFI0, USBFI1,
-	TPU, PCC,
-	MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
-	SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+	RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+	STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2,
+	USBH, USBF, TPU, PCC, MMCIF, SIM,
 	TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
-	SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
-	GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3,
+	SCIF2, GPIO,
 
 	/* interrupt groups */
 
-	TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5,
-	SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO,
+	TMU012, TMU345,
 };
 
 static struct intc_vect vectors[] __initdata = {
-	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
-	INTC_VECT(RTC_CUI, 0x4c0),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
 	INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
 	INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
 	INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
 	INTC_VECT(LCDC, 0x620),
-	INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
-	INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0),
-	INTC_VECT(DMAC0_DMAE, 0x6c0),
-	INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
-	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
-	INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0),
+	INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+	INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+	INTC_VECT(DMAC, 0x6c0),
+	INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+	INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+	INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
 	INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
-	INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920),
-	INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960),
+	INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920),
+	INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960),
 	INTC_VECT(HAC, 0x980),
 	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
 	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
-	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
-	INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
-	INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+	INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+	INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
 	INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
-	INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0),
-	INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0),
+	INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
+	INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
 	INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
-	INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80),
-	INTC_VECT(USBFI1, 0xca0),
+	INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80),
+	INTC_VECT(USBF, 0xca0),
 	INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
-	INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
-	INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
-	INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0),
-	INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0),
+	INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+	INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+	INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
+	INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
 	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
 	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
 	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
 	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-	INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
-	INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
-	INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
-	INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
+	INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20),
+	INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60),
+	INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+	INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
 };
 
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
 	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
-	INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
-		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
-	INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2),
-	INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
-	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
-	INTC_GROUP(USBF, USBFI0, USBFI1),
-	INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
-	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
-	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
-	INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
-- 
cgit v1.2.3


From 6a242909b01120f6f3d571c0b75e20ec61f0d8d3 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 6 Mar 2009 14:33:58 +0900
Subject: percpu: clean up percpu constants

Impact: cleaup

Make the following cleanups.

* There isn't much arch-specific about PERCPU_MODULE_RESERVE.  Always
  define it whether arch overrides PERCPU_ENOUGH_ROOM or not.

* blackfin overrides PERCPU_ENOUGH_ROOM to align static area size.  Do
  it by default.

* percpu allocation sizes doesn't have much to do with the page size.
  Don't use PAGE_SHIFT in their definition.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/percpu.h | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h
index 797c0c16506..c94c7bc88c7 100644
--- a/arch/blackfin/include/asm/percpu.h
+++ b/arch/blackfin/include/asm/percpu.h
@@ -3,14 +3,4 @@
 
 #include <asm-generic/percpu.h>
 
-#ifdef CONFIG_MODULES
-#define PERCPU_MODULE_RESERVE 8192
-#else
-#define PERCPU_MODULE_RESERVE 0
-#endif
-
-#define PERCPU_ENOUGH_ROOM \
-	(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
-	 PERCPU_MODULE_RESERVE)
-
 #endif	/* __ARCH_BLACKFIN_PERCPU__ */
-- 
cgit v1.2.3


From cafe8816b217b98dc3f268d3b77445da498beb4f Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 6 Mar 2009 14:33:59 +0900
Subject: percpu: use negative for auto for pcpu_setup_first_chunk() arguments

Impact: argument semantic cleanup

In pcpu_setup_first_chunk(), zero @unit_size and @dyn_size meant
auto-sizing.  It's okay for @unit_size as 0 doesn't make sense but 0
dynamic reserve size is valid.  Alos, if arch @dyn_size is calculated
from other parameters, it might end up passing in 0 @dyn_size and
malfunction when the size is automatically adjusted.

This patch makes both @unit_size and @dyn_size ssize_t and use -1 for
auto sizing.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index c29f301d388..ef3a2cd3fe6 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -344,7 +344,7 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
 		pcpu4k_nr_static_pages, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, 0, 0, NULL,
+	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, -1, -1, NULL,
 				     pcpu4k_populate_pte);
 	goto out_free_ar;
 
-- 
cgit v1.2.3


From 9a4f8a878b68d5a5d9ee60908a52cf6a55e1b823 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 6 Mar 2009 14:33:59 +0900
Subject: x86: make embedding percpu allocator return excessive free space

Impact: reduce unnecessary memory usage on certain configurations

Embedding percpu allocator allocates unit_size *
smp_num_possible_cpus() bytes consecutively and use it for the first
chunk.  However, if the static area is small, this can result in
excessive prellocated free space in the first chunk due to
PCPU_MIN_UNIT_SIZE restriction.

This patch makes embedding percpu allocator preallocate only what's
necessary as described by PERPCU_DYNAMIC_RESERVE and return the
leftover to the bootmem allocator.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 44 +++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ef3a2cd3fe6..38e2b2a470a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -241,24 +241,31 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
  * Embedding allocator
  *
  * The first chunk is sized to just contain the static area plus
- * PERCPU_DYNAMIC_RESERVE and allocated as a contiguous area using
- * bootmem allocator and used as-is without being mapped into vmalloc
- * area.  This enables the first chunk to piggy back on the linear
- * physical PMD mapping and doesn't add any additional pressure to
- * TLB.
+ * module and dynamic reserves, and allocated as a contiguous area
+ * using bootmem allocator and used as-is without being mapped into
+ * vmalloc area.  This enables the first chunk to piggy back on the
+ * linear physical PMD mapping and doesn't add any additional pressure
+ * to TLB.  Note that if the needed size is smaller than the minimum
+ * unit size, the leftover is returned to the bootmem allocator.
  */
 static void *pcpue_ptr __initdata;
+static size_t pcpue_size __initdata;
 static size_t pcpue_unit_size __initdata;
 
 static struct page * __init pcpue_get_page(unsigned int cpu, int pageno)
 {
-	return virt_to_page(pcpue_ptr + cpu * pcpue_unit_size
-			    + ((size_t)pageno << PAGE_SHIFT));
+	size_t off = (size_t)pageno << PAGE_SHIFT;
+
+	if (off >= pcpue_size)
+		return NULL;
+
+	return virt_to_page(pcpue_ptr + cpu * pcpue_unit_size + off);
 }
 
 static ssize_t __init setup_pcpu_embed(size_t static_size)
 {
 	unsigned int cpu;
+	size_t dyn_size;
 
 	/*
 	 * If large page isn't supported, there's no benefit in doing
@@ -269,25 +276,30 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 		return -EINVAL;
 
 	/* allocate and copy */
-	pcpue_unit_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
-	pcpue_unit_size = max_t(size_t, pcpue_unit_size, PCPU_MIN_UNIT_SIZE);
+	pcpue_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
+	dyn_size = pcpue_size - static_size;
+
 	pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
 				       PAGE_SIZE);
 	if (!pcpue_ptr)
 		return -ENOMEM;
 
-	for_each_possible_cpu(cpu)
-		memcpy(pcpue_ptr + cpu * pcpue_unit_size, __per_cpu_load,
-		       static_size);
+	for_each_possible_cpu(cpu) {
+		void *ptr = pcpue_ptr + cpu * pcpue_unit_size;
+
+		free_bootmem(__pa(ptr + pcpue_size),
+			     pcpue_unit_size - pcpue_size);
+		memcpy(ptr, __per_cpu_load, static_size);
+	}
 
 	/* we're ready, commit */
 	pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n",
-		pcpue_unit_size >> PAGE_SHIFT, pcpue_ptr, static_size);
+		pcpue_size >> PAGE_SHIFT, pcpue_ptr, static_size);
 
 	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
-				      pcpue_unit_size,
-				      pcpue_unit_size - static_size, pcpue_ptr,
-				      NULL);
+				      pcpue_unit_size, dyn_size,
+				      pcpue_ptr, NULL);
 }
 
 /*
-- 
cgit v1.2.3


From edcb463997ed7b2ffa3bac76e3e75957318f2e01 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 6 Mar 2009 14:33:59 +0900
Subject: percpu, module: implement reserved allocation and use it for module
 percpu variables

Impact: add reserved allocation functionality and use it for module
	percpu variables

This patch implements reserved allocation from the first chunk.  When
setting up the first chunk, arch can ask to set aside certain number
of bytes right after the core static area which is available only
through a separate reserved allocator.  This will be used primarily
for module static percpu variables on architectures with limited
relocation range to ensure that the module perpcu symbols are inside
the relocatable range.

If reserved area is requested, the first chunk becomes reserved and
isn't available for regular allocation.  If the first chunk also
includes piggy-back dynamic allocation area, a separate chunk mapping
the same region is created to serve dynamic allocation.  The first one
is called static first chunk and the second dynamic first chunk.
Although they share the page map, their different area map
initializations guarantee they serve disjoint areas according to their
purposes.

If arch doesn't setup reserved area, reserved allocation is handled
like any other allocation.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 38e2b2a470a..dd4eabc747c 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -217,7 +217,7 @@ proceed:
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
 		"%zu bytes\n", vm.addr, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, PMD_SIZE,
+	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, 0, PMD_SIZE,
 				     pcpur_size - static_size, vm.addr, NULL);
 	goto out_free_ar;
 
@@ -297,7 +297,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 	pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n",
 		pcpue_size >> PAGE_SHIFT, pcpue_ptr, static_size);
 
-	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
+	return pcpu_setup_first_chunk(pcpue_get_page, static_size, 0,
 				      pcpue_unit_size, dyn_size,
 				      pcpue_ptr, NULL);
 }
@@ -356,8 +356,8 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
 		pcpu4k_nr_static_pages, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, -1, -1, NULL,
-				     pcpu4k_populate_pte);
+	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, 0, -1, -1,
+				     NULL, pcpu4k_populate_pte);
 	goto out_free_ar;
 
 enomem:
-- 
cgit v1.2.3


From 6b19b0c2400437a3c10059ede0e59b517092e1bd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 6 Mar 2009 14:33:59 +0900
Subject: x86, percpu: setup reserved percpu area for x86_64

Impact: fix relocation overflow during module load

x86_64 uses 32bit relocations for symbol access and static percpu
symbols whether in core or modules must be inside 2GB of the percpu
segement base which the dynamic percpu allocator doesn't guarantee.
This patch makes x86_64 reserve PERCPU_MODULE_RESERVE bytes in the
first chunk so that module percpu areas are always allocated from the
first chunk which is always inside the relocatable range.

This problem exists for any percpu allocator but is easily triggered
when using the embedding allocator because the second chunk is located
beyond 2GB on it.

This patch also changes the meaning of PERCPU_DYNAMIC_RESERVE such
that it only indicates the size of the area to reserve for dynamic
allocation as static and dynamic areas can be separate.  New
PERCPU_DYNAMIC_RESERVED is increased by 4k for both 32 and 64bits as
the reserved area separation eats away some allocatable space and
having slightly more headroom (currently between 4 and 8k after
minimal boot sans module area) makes sense for common case
performance.

x86_32 can address anywhere from anywhere and doesn't need reserving.

Mike Galbraith first reported the problem first and bisected it to the
embedding percpu allocator commit.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Galbraith <efault@gmx.de>
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 37 ++++++++++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index dd4eabc747c..efa615f2bf4 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -42,6 +42,19 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
 };
 EXPORT_SYMBOL(__per_cpu_offset);
 
+/*
+ * On x86_64 symbols referenced from code should be reachable using
+ * 32bit relocations.  Reserve space for static percpu variables in
+ * modules so that they are always served from the first chunk which
+ * is located at the percpu segment base.  On x86_32, anything can
+ * address anywhere.  No need to reserve space in the first chunk.
+ */
+#ifdef CONFIG_X86_64
+#define PERCPU_FIRST_CHUNK_RESERVE	PERCPU_MODULE_RESERVE
+#else
+#define PERCPU_FIRST_CHUNK_RESERVE	0
+#endif
+
 /**
  * pcpu_need_numa - determine percpu allocation needs to consider NUMA
  *
@@ -141,7 +154,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 {
 	static struct vm_struct vm;
 	pg_data_t *last;
-	size_t ptrs_size;
+	size_t ptrs_size, dyn_size;
 	unsigned int cpu;
 	ssize_t ret;
 
@@ -169,12 +182,14 @@ proceed:
 	 * Currently supports only single page.  Supporting multiple
 	 * pages won't be too difficult if it ever becomes necessary.
 	 */
-	pcpur_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+			       PERCPU_DYNAMIC_RESERVE);
 	if (pcpur_size > PMD_SIZE) {
 		pr_warning("PERCPU: static data is larger than large page, "
 			   "can't use large page\n");
 		return -EINVAL;
 	}
+	dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
 	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
@@ -217,8 +232,9 @@ proceed:
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
 		"%zu bytes\n", vm.addr, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, 0, PMD_SIZE,
-				     pcpur_size - static_size, vm.addr, NULL);
+	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+				     PERCPU_FIRST_CHUNK_RESERVE,
+				     PMD_SIZE, dyn_size, vm.addr, NULL);
 	goto out_free_ar;
 
 enomem:
@@ -276,9 +292,10 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 		return -EINVAL;
 
 	/* allocate and copy */
-	pcpue_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE);
+	pcpue_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+			       PERCPU_DYNAMIC_RESERVE);
 	pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
-	dyn_size = pcpue_size - static_size;
+	dyn_size = pcpue_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
 				       PAGE_SIZE);
@@ -297,7 +314,8 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 	pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n",
 		pcpue_size >> PAGE_SHIFT, pcpue_ptr, static_size);
 
-	return pcpu_setup_first_chunk(pcpue_get_page, static_size, 0,
+	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
+				      PERCPU_FIRST_CHUNK_RESERVE,
 				      pcpue_unit_size, dyn_size,
 				      pcpue_ptr, NULL);
 }
@@ -356,8 +374,9 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
 		pcpu4k_nr_static_pages, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, 0, -1, -1,
-				     NULL, pcpu4k_populate_pte);
+	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size,
+				     PERCPU_FIRST_CHUNK_RESERVE, -1, -1, NULL,
+				     pcpu4k_populate_pte);
 	goto out_free_ar;
 
 enomem:
-- 
cgit v1.2.3


From 075901af281b2afb47b1423ac488e713844db396 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 6 Mar 2009 14:37:34 +0900
Subject: sh: Restore RTC IRQ setting for SH7763 setup.

This was accidentally dropped in the multiple vectors per irq conversion.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 14a916f0d75..bdf0f61ae1e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -23,6 +23,7 @@ static struct resource rtc_resources[] = {
 	},
 	[1] = {
 		/* Shared Period/Carry/Alarm IRQ */
+		.start  = 20,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
-- 
cgit v1.2.3


From bb943a286c6f2993a737cc44c170d8b26e72c8ff Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 17:58:51 +0900
Subject: sh: multiple vectors per irq - sh7203.

Follow the conversions as per the other subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 213 +++++++++++----------------------
 1 file changed, 73 insertions(+), 140 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index e98dc445035..18d127ca0e6 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -1,7 +1,7 @@
 /*
  * SH7203 and SH7263 Setup
  *
- *  Copyright (C) 2007  Paul Mundt
+ *  Copyright (C) 2007 - 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,50 +18,31 @@ enum {
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
 	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-	DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI,
-	DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI,
-	DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI,
-	DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI,
+	DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
 	USB, LCDC, CMT0, CMT1, BSC, WDT,
-	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
-	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
-	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
-	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
-	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
-	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
+
+	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+	MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V,
+
 	ADC_ADI,
-	IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI,
-	IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI,
-	IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI,
-	IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI,
-	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
-	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
-	SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
-	SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
-	SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI,
-	SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI,
+
+	IIC30, IIC31, IIC32, IIC33,
+	SCIF0, SCIF1, SCIF2, SCIF3,
+
+	SSU0, SSU1,
+
 	SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
 
 	/* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
 	ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF,
 	ROMDEC_IREADY,
 
-	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
-
-	SDHI3, SDHI0, SDHI1,
-
-	RTC_ARM, RTC_PRD, RTC_CUP,
-	RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE,
-	RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE,
+	FLCTL, SDHI3, SDHI0, SDHI1, RTC, RCAN0, RCAN1,
 
 	SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI,
 
 	/* interrupt groups */
-	PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
-	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
-	MTU3_ABCD, MTU4_ABCD,
-	IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3,
-	SSU0, SSU1, ROMDEC, SDHI, FLCTL, RTC, RCAN0, RCAN1, SRC
+	PINT, ROMDEC, SDHI, SRC
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -73,68 +54,68 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
 	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
 	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
-	INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109),
-	INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113),
-	INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117),
-	INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121),
-	INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125),
-	INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129),
-	INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133),
-	INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137),
+	INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+	INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+	INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+	INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+	INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+	INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+	INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+	INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
 	INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
 	INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
 	INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
-	INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147),
-	INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149),
-	INTC_IRQ(MTU2_TCI0V, 150),
-	INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152),
-	INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154),
-	INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156),
-	INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158),
-	INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160),
-	INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162),
-	INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164),
+	INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147),
+	INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149),
+	INTC_IRQ(MTU0_VEF, 150),
+	INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152),
+	INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154),
+	INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156),
+	INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158),
+	INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160),
+	INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162),
+	INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164),
 	INTC_IRQ(MTU2_TCI3V, 165),
-	INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167),
-	INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169),
+	INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167),
+	INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169),
 	INTC_IRQ(MTU2_TCI4V, 170),
 	INTC_IRQ(ADC_ADI, 171),
-	INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173),
-	INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175),
-	INTC_IRQ(IIC30_TEI, 176),
-	INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178),
-	INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180),
-	INTC_IRQ(IIC31_TEI, 181),
-	INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183),
-	INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185),
-	INTC_IRQ(IIC32_TEI, 186),
-	INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188),
-	INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190),
-	INTC_IRQ(IIC33_TEI, 191),
-	INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193),
-	INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195),
-	INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197),
-	INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199),
-	INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201),
-	INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203),
-	INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205),
-	INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207),
-	INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209),
-	INTC_IRQ(SSU0_SSTXI, 210),
-	INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212),
-	INTC_IRQ(SSU1_SSTXI, 213),
+	INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173),
+	INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175),
+	INTC_IRQ(IIC30, 176),
+	INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178),
+	INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180),
+	INTC_IRQ(IIC31, 181),
+	INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183),
+	INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185),
+	INTC_IRQ(IIC32, 186),
+	INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188),
+	INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190),
+	INTC_IRQ(IIC33, 191),
+	INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193),
+	INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195),
+	INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197),
+	INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199),
+	INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201),
+	INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203),
+	INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205),
+	INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207),
+	INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209),
+	INTC_IRQ(SSU0, 210),
+	INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212),
+	INTC_IRQ(SSU1, 213),
 	INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
 	INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
-	INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225),
-	INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227),
-	INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232),
-	INTC_IRQ(RTC_CUP, 233),
-	INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235),
-	INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237),
-	INTC_IRQ(RCAN0_SLE, 238),
-	INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240),
-	INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242),
-	INTC_IRQ(RCAN1_SLE, 243),
+	INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225),
+	INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227),
+	INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232),
+	INTC_IRQ(RTC, 233),
+	INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235),
+	INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237),
+	INTC_IRQ(RCAN0, 238),
+	INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240),
+	INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242),
+	INTC_IRQ(RCAN1, 243),
 
 	/* SH7263-specific trash */
 #ifdef CONFIG_CPU_SUBTYPE_SH7263
@@ -154,44 +135,6 @@ static struct intc_vect vectors[] __initdata = {
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
 		   PINT4, PINT5, PINT6, PINT7),
-	INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI),
-	INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI),
-	INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI),
-	INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI),
-	INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI),
-	INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI),
-	INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI),
-	INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI),
-	INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
-	INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
-	INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B),
-	INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U),
-	INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B),
-	INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U),
-	INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
-	INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
-	INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI,
-		   IIC30_TEI),
-	INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI,
-		   IIC31_TEI),
-	INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI,
-		   IIC32_TEI),
-	INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI,
-		   IIC33_TEI),
-	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
-	INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
-	INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
-	INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI),
-	INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI),
-	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I,
-		   FLCTL_FLTREQ1I),
-	INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP),
-	INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1,
-		   RCAN0_SLE),
-	INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1,
-		   RCAN1_SLE),
-
 #ifdef CONFIG_CPU_SUBTYPE_SH7263
 	INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG,
 		   ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY),
@@ -242,22 +185,22 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xfffe8000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 193, 194, 195, 192 },
+		.irqs		=  { 192, 192, 192, 192 },
 	}, {
 		.mapbase	= 0xfffe8800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 197, 198, 199, 196 },
+		.irqs		=  { 196, 196, 196, 196 },
 	}, {
 		.mapbase	= 0xfffe9000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 201, 202, 203, 200 },
+		.irqs		=  { 200, 200, 200, 200 },
 	}, {
 		.mapbase	= 0xfffe9800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 205, 206, 207, 204 },
+		.irqs		=  { 204, 204, 204, 204 },
 	}, {
 		.flags = 0,
 	}
@@ -278,17 +221,7 @@ static struct resource rtc_resources[] = {
 		.flags	= IORESOURCE_IO,
 	},
 	[1] = {
-		/* Period IRQ */
-		.start	= 232,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= 233,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
+		/* Shared Period/Carry/Alarm IRQ */
 		.start	= 231,
 		.flags	= IORESOURCE_IRQ,
 	},
-- 
cgit v1.2.3


From e45efe68d11e9f3c836b019a32b879a26a2b9b33 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 18:02:33 +0900
Subject: sh: multiple vectors per irq - sh7263.

Convert over the SH7263 IRQ groups as well.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 18d127ca0e6..820dfb2e865 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -34,15 +34,11 @@ enum {
 	SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
 
 	/* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
-	ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF,
-	ROMDEC_IREADY,
-
-	FLCTL, SDHI3, SDHI0, SDHI1, RTC, RCAN0, RCAN1,
-
-	SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI,
+	ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1,
+	SRC, IEBI,
 
 	/* interrupt groups */
-	PINT, ROMDEC, SDHI, SRC
+	PINT,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -119,14 +115,15 @@ static struct intc_vect vectors[] __initdata = {
 
 	/* SH7263-specific trash */
 #ifdef CONFIG_CPU_SUBTYPE_SH7263
-	INTC_IRQ(ROMDEC_ISY, 218), INTC_IRQ(ROMDEC_IERR, 219),
-	INTC_IRQ(ROMDEC_IARG, 220), INTC_IRQ(ROMDEC_ISEC, 221),
-	INTC_IRQ(ROMDEC_IBUF, 222), INTC_IRQ(ROMDEC_IREADY, 223),
+	INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219),
+	INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221),
+	INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223),
 
-	INTC_IRQ(SDHI3, 228), INTC_IRQ(SDHI0, 229), INTC_IRQ(SDHI1, 230),
+	INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229),
+	INTC_IRQ(SDHI, 230),
 
-	INTC_IRQ(SRC_OVF, 244), INTC_IRQ(SRC_ODFI, 245),
-	INTC_IRQ(SRC_IDEI, 246),
+	INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245),
+	INTC_IRQ(SRC, 246),
 
 	INTC_IRQ(IEBI, 247),
 #endif
@@ -135,12 +132,6 @@ static struct intc_vect vectors[] __initdata = {
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
 		   PINT4, PINT5, PINT6, PINT7),
-#ifdef CONFIG_CPU_SUBTYPE_SH7263
-	INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG,
-		   ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY),
-	INTC_GROUP(SDHI, SDHI3, SDHI0, SDHI1),
-	INTC_GROUP(SRC, SRC_OVF, SRC_ODFI, SRC_IDEI),
-#endif
 };
 
 static struct intc_prio_reg prio_registers[] __initdata = {
-- 
cgit v1.2.3


From d55eedd57d05dbb00e4b66d1c01ea6fac0274c38 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 18:21:38 +0900
Subject: sh: multiple vectors per irq - sh7201.

Follow the conversions as per the other subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 224 ++++++++++++---------------------
 1 file changed, 80 insertions(+), 144 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index 0631e421c02..00f42f9e3f5 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -2,6 +2,7 @@
  *  SH7201 setup
  *
  *  Copyright (C) 2008  Peter Griffin pgriffin@mpc-data.co.uk
+ *  Copyright (C) 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,57 +19,32 @@ enum {
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
 	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
 	ADC_ADI,
-	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
-	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
-	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
-	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
-	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
-	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
-	MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
-	RTC_ARM, RTC_PRD, RTC_CUP,
-	WDT,
-	IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI,
-	IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI,
-	IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI,
+
+	MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
+	MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V,
+
+	RTC, WDT,
+
+	IIC30, IIC31, IIC32,
 
 	DMAC0_DMINT0, DMAC1_DMINT1,
 	DMAC2_DMINT2, DMAC3_DMINT3,
 
-	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
-	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
-	SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
-	SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
-	SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
-	SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
-	SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
-	SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
+	SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
 
 	DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
 	DMAC7_DMINT7,
 
-	RCAN0_ERS, RCAN0_OVR,
-	RCAN0_SLE,
-	RCAN0_RM0, RCAN0_RM1,
-
-	RCAN1_ERS, RCAN1_OVR,
-	RCAN1_SLE,
-	RCAN1_RM0, RCAN1_RM1,
+	RCAN0, RCAN1,
 
 	SSI0_SSII, SSI1_SSII,
 
-	TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0,
-	TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1,
+	TMR0, TMR1,
 
 	/* interrupt groups */
-
-	IRQ, PINT, ADC,
-	MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
-	MTU23_ABCD, MTU24_ABCD, MTU25_UVW,
-	RTC, IIC30, IIC31, IIC32,
-	SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
-	RCAN0, RCAN1, TMR0, TMR1
-
+	PINT,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -76,6 +52,7 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
 	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
 	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+
 	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
 	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
 	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
@@ -83,123 +60,92 @@ static struct intc_vect vectors[] __initdata = {
 
 	INTC_IRQ(ADC_ADI, 92),
 
-	INTC_IRQ(MTU2_TGI0A, 108), INTC_IRQ(MTU2_TGI0B, 109),
-	INTC_IRQ(MTU2_TGI0C, 110), INTC_IRQ(MTU2_TGI0D, 111),
-	INTC_IRQ(MTU2_TCI0V, 112),
-	INTC_IRQ(MTU2_TGI0E, 113), INTC_IRQ(MTU2_TGI0F, 114),
+	INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109),
+	INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111),
+
+	INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113),
+	INTC_IRQ(MTU20_VEF, 114),
+
+	INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117),
+	INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121),
 
-	INTC_IRQ(MTU2_TGI1A, 116), INTC_IRQ(MTU2_TGI1B, 117),
-	INTC_IRQ(MTU2_TCI1V, 120), INTC_IRQ(MTU2_TCI1U, 121),
+	INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125),
+	INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129),
 
-	INTC_IRQ(MTU2_TGI2A, 124), INTC_IRQ(MTU2_TGI2B, 125),
-	INTC_IRQ(MTU2_TCI2V, 128), INTC_IRQ(MTU2_TCI2U, 129),
+	INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133),
+	INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135),
 
-	INTC_IRQ(MTU2_TGI3A, 132), INTC_IRQ(MTU2_TGI3B, 133),
-	INTC_IRQ(MTU2_TGI3C, 134), INTC_IRQ(MTU2_TGI3D, 135),
 	INTC_IRQ(MTU2_TCI3V, 136),
 
-	INTC_IRQ(MTU2_TGI4A, 140), INTC_IRQ(MTU2_TGI4B, 141),
-	INTC_IRQ(MTU2_TGI4C, 142), INTC_IRQ(MTU2_TGI4D, 143),
+	INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141),
+	INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143),
+
 	INTC_IRQ(MTU2_TCI4V, 144),
 
-	INTC_IRQ(MTU2_TGI5U, 148), INTC_IRQ(MTU2_TGI5V, 149),
-	INTC_IRQ(MTU2_TGI5W, 150),
+	INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149),
+	INTC_IRQ(MTU25_UVW, 150),
+
+	INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153),
+	INTC_IRQ(RTC, 154),
 
-	INTC_IRQ(RTC_ARM, 152), INTC_IRQ(RTC_PRD, 153),
-	INTC_IRQ(RTC_CUP, 154), INTC_IRQ(WDT, 156),
+	INTC_IRQ(WDT, 156),
 
-	INTC_IRQ(IIC30_STPI, 157), INTC_IRQ(IIC30_NAKI, 158),
-	INTC_IRQ(IIC30_RXI, 159), INTC_IRQ(IIC30_TXI, 160),
-	INTC_IRQ(IIC30_TEI, 161),
+	INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158),
+	INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160),
+	INTC_IRQ(IIC30, 161),
 
-	INTC_IRQ(IIC31_STPI, 164), INTC_IRQ(IIC31_NAKI, 165),
-	INTC_IRQ(IIC31_RXI, 166), INTC_IRQ(IIC31_TXI, 167),
-	INTC_IRQ(IIC31_TEI, 168),
+	INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165),
+	INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167),
+	INTC_IRQ(IIC31, 168),
 
-	INTC_IRQ(IIC32_STPI, 170), INTC_IRQ(IIC32_NAKI, 171),
-	INTC_IRQ(IIC32_RXI, 172), INTC_IRQ(IIC32_TXI, 173),
-	INTC_IRQ(IIC32_TEI, 174),
+	INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171),
+	INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173),
+	INTC_IRQ(IIC32, 174),
 
 	INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
 	INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
 
-	INTC_IRQ(SCIF0_BRI, 180), INTC_IRQ(SCIF0_ERI, 181),
-	INTC_IRQ(SCIF0_RXI, 182), INTC_IRQ(SCIF0_TXI, 183),
-	INTC_IRQ(SCIF1_BRI, 184), INTC_IRQ(SCIF1_ERI, 185),
-	INTC_IRQ(SCIF1_RXI, 186), INTC_IRQ(SCIF1_TXI, 187),
-	INTC_IRQ(SCIF2_BRI, 188), INTC_IRQ(SCIF2_ERI, 189),
-	INTC_IRQ(SCIF2_RXI, 190), INTC_IRQ(SCIF2_TXI, 191),
-	INTC_IRQ(SCIF3_BRI, 192), INTC_IRQ(SCIF3_ERI, 193),
-	INTC_IRQ(SCIF3_RXI, 194), INTC_IRQ(SCIF3_TXI, 195),
-	INTC_IRQ(SCIF4_BRI, 196), INTC_IRQ(SCIF4_ERI, 197),
-	INTC_IRQ(SCIF4_RXI, 198), INTC_IRQ(SCIF4_TXI, 199),
-	INTC_IRQ(SCIF5_BRI, 200), INTC_IRQ(SCIF5_ERI, 201),
-	INTC_IRQ(SCIF5_RXI, 202), INTC_IRQ(SCIF5_TXI, 203),
-	INTC_IRQ(SCIF6_BRI, 204), INTC_IRQ(SCIF6_ERI, 205),
-	INTC_IRQ(SCIF6_RXI, 206), INTC_IRQ(SCIF6_TXI, 207),
-	INTC_IRQ(SCIF7_BRI, 208), INTC_IRQ(SCIF7_ERI, 209),
-	INTC_IRQ(SCIF7_RXI, 210), INTC_IRQ(SCIF7_TXI, 211),
+	INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181),
+	INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183),
+	INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185),
+	INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187),
+	INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189),
+	INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191),
+	INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193),
+	INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195),
+	INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197),
+	INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199),
+	INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201),
+	INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203),
+	INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205),
+	INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207),
+	INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209),
+	INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211),
 
 	INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
 	INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
 	INTC_IRQ(DMAC7_DMINT7, 219),
 
-	INTC_IRQ(RCAN0_ERS, 228), INTC_IRQ(RCAN0_OVR, 229),
-	INTC_IRQ(RCAN0_SLE, 230),
-	INTC_IRQ(RCAN0_RM0, 231), INTC_IRQ(RCAN0_RM1, 232),
+	INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229),
+	INTC_IRQ(RCAN0, 230),
+	INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232),
 
-	INTC_IRQ(RCAN1_ERS, 234), INTC_IRQ(RCAN1_OVR, 235),
-	INTC_IRQ(RCAN1_SLE, 236),
-	INTC_IRQ(RCAN1_RM0, 237), INTC_IRQ(RCAN1_RM1, 238),
+	INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235),
+	INTC_IRQ(RCAN1, 236),
+	INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238),
 
 	INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
 
-	INTC_IRQ(TMR0_CMIA0, 246), INTC_IRQ(TMR0_CMIB0, 247),
-	INTC_IRQ(TMR0_OVI0, 248),
-
-	INTC_IRQ(TMR1_CMIA1, 252), INTC_IRQ(TMR1_CMIB1, 253),
-	INTC_IRQ(TMR1_OVI1, 254),
+	INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247),
+	INTC_IRQ(TMR0, 248),
 
+	INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253),
+	INTC_IRQ(TMR1, 254),
 };
 
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
 		   PINT4, PINT5, PINT6, PINT7),
-	INTC_GROUP(MTU20_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
-	INTC_GROUP(MTU20_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
-
-	INTC_GROUP(MTU21_AB, MTU2_TGI1A, MTU2_TGI1B),
-	INTC_GROUP(MTU21_VU, MTU2_TCI1V, MTU2_TCI1U),
-	INTC_GROUP(MTU22_AB, MTU2_TGI2A, MTU2_TGI2B),
-	INTC_GROUP(MTU22_VU, MTU2_TCI2V, MTU2_TCI2U),
-	INTC_GROUP(MTU23_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
-	INTC_GROUP(MTU24_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
-	INTC_GROUP(MTU25_UVW, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
-	INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP ),
-
-	INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI,
-		   IIC30_TEI),
-	INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI,
-		   IIC31_TEI),
-	INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI,
-		   IIC32_TEI),
-
-	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
-	INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
-	INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
-	INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
-	INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
-	INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
-	INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-
-	INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1,
-		   RCAN0_SLE),
-	INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1,
-		   RCAN1_SLE),
-
-	INTC_GROUP(TMR0, TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0),
-	INTC_GROUP(TMR1, TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1),
 };
 
 static struct intc_prio_reg prio_registers[] __initdata = {
@@ -212,7 +158,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 
 	{ 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
 	{ 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
-	{ 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0 , SCIF1 } },
+	{ 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } },
 	{ 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
 	{ 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4  } },
 	{ 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
@@ -234,42 +180,42 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xfffe8000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 181, 182, 183, 180}
+		.irqs		= { 180, 180, 180, 180 }
 	}, {
 		.mapbase	= 0xfffe8800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 185, 186, 187, 184}
+		.irqs		= { 184, 184, 184, 184 }
 	}, {
 		.mapbase	= 0xfffe9000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 189, 186, 187, 188}
+		.irqs		= { 188, 188, 188, 188 }
 	}, {
 		.mapbase	= 0xfffe9800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 193, 194, 195, 192}
+		.irqs		= { 192, 192, 192, 192 }
 	}, {
 		.mapbase	= 0xfffea000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 196, 198, 199, 196}
+		.irqs		= { 196, 196, 196, 196 }
 	}, {
 		.mapbase	= 0xfffea800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 201, 202, 203, 200}
+		.irqs		= { 200, 200, 200, 200 }
 	}, {
 		.mapbase	= 0xfffeb000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 205, 206, 207, 204}
+		.irqs		= { 204, 204, 204, 204 }
 	}, {
 		.mapbase	= 0xfffeb800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 209, 210, 211, 208}
+		.irqs		= { 208, 208, 208, 208 }
 	}, {
 		.flags = 0,
 	}
@@ -290,17 +236,7 @@ static struct resource rtc_resources[] = {
 		.flags	= IORESOURCE_IO,
 	},
 	[1] = {
-		/* Period IRQ */
-		.start	= 153,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= 154,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
+		/* Shared Period/Carry/Alarm IRQ */
 		.start	= 152,
 		.flags	= IORESOURCE_IRQ,
 	},
-- 
cgit v1.2.3


From f858abbecd0a3ec0ab3e3678612d626a0bd49686 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 18:34:15 +0900
Subject: sh: multiple vectors per irq - sh7206.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 154 +++++++++++++--------------------
 1 file changed, 58 insertions(+), 96 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index e6d4ec445dd..c46a8355726 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -2,6 +2,7 @@
  * SH7206 Setup
  *
  *  Copyright (C) 2006  Yoshinori Sato
+ *  Copyright (C) 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -19,34 +20,23 @@ enum {
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
 	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
 	ADC_ADI0, ADC_ADI1,
-	DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI,
-	DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI,
-	DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI,
-	DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI,
+
+	DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+
+	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+	MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
+	IIC3,
+
 	CMT0, CMT1, BSC, WDT,
-	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
-	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
-	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
-	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
-	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
-	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
-	MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
-	POE2_OEI1, POE2_OEI2,
-	MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V,
-	MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V,
-	MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W,
+
+	MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V,
+
 	POE2_OEI3,
-	IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI,
-	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
-	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
-	SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
-	SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
+
+	SCIF0, SCIF1, SCIF2, SCIF3,
 
 	/* interrupt groups */
-	PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
-	MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
-	MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
-	IIC3, SCIF0, SCIF1, SCIF2, SCIF3,
+	PINT,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -59,86 +49,58 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
 	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
 	INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
-	INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109),
-	INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113),
-	INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117),
-	INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121),
-	INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125),
-	INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129),
-	INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133),
-	INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137),
+	INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+	INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+	INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+	INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+	INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+	INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+	INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+	INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
 	INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
 	INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
-	INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157),
-	INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159),
-	INTC_IRQ(MTU2_TCI0V, 160),
-	INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162),
-	INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165),
-	INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169),
-	INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173),
-	INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177),
-	INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181),
-	INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183),
+	INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157),
+	INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159),
+	INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161),
+	INTC_IRQ(MTU0_VEF, 162),
+	INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165),
+	INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169),
+	INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173),
+	INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177),
+	INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181),
+	INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183),
 	INTC_IRQ(MTU2_TCI3V, 184),
-	INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189),
-	INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191),
+	INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189),
+	INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191),
 	INTC_IRQ(MTU2_TCI4V, 192),
-	INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197),
-	INTC_IRQ(MTU2_TGI5W, 198),
-	INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201),
-	INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205),
-	INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207),
+	INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197),
+	INTC_IRQ(MTU5, 198),
+	INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201),
+	INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205),
+	INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207),
 	INTC_IRQ(MTU2S_TCI3V, 208),
-	INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213),
-	INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215),
+	INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213),
+	INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215),
 	INTC_IRQ(MTU2S_TCI4V, 216),
-	INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221),
-	INTC_IRQ(MTU2S_TGI5W, 222),
+	INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221),
+	INTC_IRQ(MTU5S, 222),
 	INTC_IRQ(POE2_OEI3, 224),
-	INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229),
-	INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231),
-	INTC_IRQ(IIC3_TEI, 232),
-	INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241),
-	INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243),
-	INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245),
-	INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247),
-	INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249),
-	INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251),
-	INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253),
-	INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255),
+	INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229),
+	INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231),
+	INTC_IRQ(IIC3, 232),
+	INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241),
+	INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243),
+	INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245),
+	INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247),
+	INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249),
+	INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251),
+	INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253),
+	INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255),
 };
 
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
 		   PINT4, PINT5, PINT6, PINT7),
-	INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI),
-	INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI),
-	INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI),
-	INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI),
-	INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI),
-	INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI),
-	INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI),
-	INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI),
-	INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
-	INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
-	INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B),
-	INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U),
-	INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B),
-	INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U),
-	INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
-	INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
-	INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
-	INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2),
-	INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B,
-		   MTU2S_TGI3C, MTU2S_TGI3D),
-	INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B,
-		   MTU2S_TGI4C, MTU2S_TGI4D),
-	INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W),
-	INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI),
-	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
-	INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
-	INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
 };
 
 static struct intc_prio_reg prio_registers[] __initdata = {
@@ -174,22 +136,22 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xfffe8000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 241, 242, 243, 240 },
+		.irqs		= { 240, 240, 240, 240 },
 	}, {
 		.mapbase	= 0xfffe8800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 245, 246, 247, 244 },
+		.irqs		= { 244, 244, 244, 244 },
 	}, {
 		.mapbase	= 0xfffe9000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 249, 250, 251, 248 },
+		.irqs		= { 248, 248, 248, 248 },
 	}, {
 		.mapbase	= 0xfffe9800,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 253, 254, 255, 252 },
+		.irqs		= { 252, 252, 252, 252 },
 	}, {
 		.flags = 0,
 	}
-- 
cgit v1.2.3


From 5dece2bbda728fbf6a70e48be782c24c427072b0 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 19:19:31 +0900
Subject: sh: multiple vectors per irq - sh7619.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/setup-sh7619.c | 34 ++++++++++++----------------------
 1 file changed, 12 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 56e5878e551..0e32d8e448c 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -2,6 +2,7 @@
  * SH7619 Setup
  *
  *  Copyright (C) 2006  Yoshinori Sato
+ *  Copyright (C) 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,15 +19,10 @@ enum {
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
 	WDT, EDMAC, CMT0, CMT1,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
-	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
-	SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+	SCIF0, SCIF1, SCIF2,
 	HIF_HIFI, HIF_HIFBI,
 	DMAC0, DMAC1, DMAC2, DMAC3,
 	SIOF,
-
-	/* interrupt groups */
-	SCIF0, SCIF1, SCIF2,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -36,24 +32,18 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
 	INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
 	INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
-	INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89),
-	INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91),
-	INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93),
-	INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95),
-	INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97),
-	INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99),
+	INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
+	INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
+	INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
+	INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
+	INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
+	INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
 	INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
 	INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
 	INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
 	INTC_IRQ(SIOF, 108),
 };
 
-static struct intc_group groups[] __initdata = {
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
-	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
-};
-
 static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
 	{ 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
@@ -64,7 +54,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -72,17 +62,17 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xf8400000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 88, 89, 91, 90},
+		.irqs		= { 88, 88, 88, 88 },
 	}, {
 		.mapbase	= 0xf8410000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 92, 93, 95, 94},
+		.irqs		= { 92, 92, 92, 92 },
 	}, {
 		.mapbase	= 0xf8420000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		=  { 96, 97, 99, 98},
+		.irqs		= { 96, 96, 96, 96 },
 	}, {
 		.flags = 0,
 	}
-- 
cgit v1.2.3


From 053bfc5360c106528bbb57464ad2cbf4a2af8133 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 19:19:54 +0900
Subject: sh: multiple vectors per irq - mxg.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2a/setup-mxg.c | 65 +++++++++++++------------------------
 1 file changed, 23 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index e611d79fac4..844293723cf 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -1,7 +1,7 @@
 /*
  * Renesas MX-G (R8A03022BG) Setup
  *
- *  Copyright (C) 2008  Paul Mundt
+ *  Copyright (C) 2008, 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,23 +20,15 @@ enum {
 	IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
 
 	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
 	SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
 
-	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
-	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+	SCIF0, SCIF1,
 
-	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
-	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
-	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
-	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
-	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
-	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
-	MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
+	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+	MTU2_TGI3B, MTU2_TGI3C,
 
 	/* interrupt groups */
-	PINT, SCIF0, SCIF1,
-	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+	PINT,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -59,47 +51,36 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
 	INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
 
-	INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221),
-	INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223),
-	INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225),
-	INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227),
+	INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221),
+	INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223),
+	INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225),
+	INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227),
 
-	INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229),
-	INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231),
-	INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233),
+	INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229),
+	INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231),
+	INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233),
 
-	INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235),
-	INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237),
-	INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239),
+	INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235),
+	INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237),
+	INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239),
 
-	INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241),
-	INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243),
+	INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241),
+	INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243),
 
 	INTC_IRQ(MTU2_TGI3B, 244),
 	INTC_IRQ(MTU2_TGI3C, 245),
 
-	INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247),
-	INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249),
-	INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251),
+	INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247),
+	INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249),
+	INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251),
 
-	INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253),
-	INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255),
+	INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253),
+	INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255),
 };
 
 static struct intc_group groups[] __initdata = {
 	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
 		   PINT4, PINT5, PINT6, PINT7),
-	INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
-		   MTU2_TCI0V, MTU2_TGI0E),
-	INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B,
-		   MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A),
-	INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
-		   MTU2_TGI3A),
-	INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A,
-		   MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
-	INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
-	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
 };
 
 static struct intc_prio_reg prio_registers[] __initdata = {
@@ -137,7 +118,7 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xff804000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 223, 220, 221, 222 },
+		.irqs		= { 220, 220, 220, 220 },
 	}, {
 		.flags = 0,
 	}
-- 
cgit v1.2.3


From 592acbda89f40a93f7d71564cdf1da83229d226e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 19:20:14 +0900
Subject: sh: multiple vectors per irq - sh770x.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/setup-sh770x.c | 68 +++++++++++------------------------
 1 file changed, 21 insertions(+), 47 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index 93c55e2ed95..a74f960b5e7 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -2,6 +2,7 @@
  * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
  *
  *  Copyright (C) 2007  Magnus Damm
+ *  Copyright (C) 2009  Paul Mundt
  *
  * Based on setup-sh7709.c
  *
@@ -24,46 +25,37 @@ enum {
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
 	PINT07, PINT815,
-	DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
-	SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
-	SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI,
-	ADC_ADI,
+	DMAC, SCIF0, SCIF2, SCI, ADC_ADI,
 	LCDC, PCC0, PCC1,
-	TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
-	RTC_ATI, RTC_PRI, RTC_CUI,
-	WDT,
-	REF_RCMI, REF_ROVI,
-
-	/* interrupt groups */
-	RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0,
+	TMU0, TMU1, TMU2,
+	RTC, WDT, REF,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
-	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
-	INTC_VECT(RTC_CUI, 0x4c0),
-	INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500),
-	INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500),
+	INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540),
 	INTC_VECT(WDT, 0x560),
-	INTC_VECT(REF_RCMI, 0x580),
-	INTC_VECT(REF_ROVI, 0x5a0),
+	INTC_VECT(REF, 0x580),
+	INTC_VECT(REF, 0x5a0),
 #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
     defined(CONFIG_CPU_SUBTYPE_SH7709)
 	/* IRQ0->5 are handled in setup-sh3.c */
-	INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
-	INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
+	INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
+	INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
 	INTC_VECT(ADC_ADI, 0x980),
-	INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
-	INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960),
+	INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
+	INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960),
 #endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
     defined(CONFIG_CPU_SUBTYPE_SH7709)
 	INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
-	INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
-	INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+	INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+	INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
 #endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7707)
 	INTC_VECT(LCDC, 0x9a0),
@@ -71,16 +63,6 @@ static struct intc_vect vectors[] __initdata = {
 #endif
 };
 
-static struct intc_group groups[] __initdata = {
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
-	INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
-	INTC_GROUP(REF, REF_RCMI, REF_ROVI),
-	INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
-	INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI),
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
-	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
-};
-
 static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
 	{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
@@ -101,7 +83,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 #endif
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 static struct resource rtc_resources[] = {
@@ -111,14 +93,6 @@ static struct resource rtc_resources[] = {
 		.flags  = IORESOURCE_IO,
 	},
 	[1] =	{
-		.start  = 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] =	{
-		.start	= 22,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] =	{
 		.start	= 20,
 		.flags  = IORESOURCE_IRQ,
 	},
@@ -136,7 +110,7 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xfffffe80,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCI,
-		.irqs		= { 23, 24, 25, 0 },
+		.irqs		= { 23, 23, 23, 0 },
 	},
 #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
@@ -145,7 +119,7 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xa4000150,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 56, 57, 59, 58 },
+		.irqs		= { 56, 56, 56, 56 },
 	},
 #endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
@@ -154,7 +128,7 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xa4000140,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_IRDA,
-		.irqs		= { 52, 53, 55, 54 },
+		.irqs		= { 52, 52, 52, 52 },
 	},
 #endif
 	{
-- 
cgit v1.2.3


From 0caedb02c4a02b6fd0f1a62dfeb917353d3c6162 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 19:20:32 +0900
Subject: sh: multiple vectors per irq - sh7705.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/setup-sh7705.c | 61 +++++++++++------------------------
 1 file changed, 19 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 6468ae86b94..63b67badd67 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -1,7 +1,7 @@
 /*
  * SH7705 Setup
  *
- *  Copyright (C) 2006, 2007  Paul Mundt
+ *  Copyright (C) 2006 - 2009  Paul Mundt
  *  Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -21,51 +21,36 @@ enum {
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
 	PINT07, PINT815,
-	DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
-	SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
-	ADC_ADI,
-	USB_USI0, USB_USI1,
+
+	DMAC, SCIF0, SCIF2, ADC_ADI, USB,
+
 	TPU0, TPU1, TPU2, TPU3,
-	TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
-	RTC_ATI, RTC_PRI, RTC_CUI,
-	WDT,
-	REF_RCMI,
+	TMU0, TMU1, TMU2,
 
-	/* interrupt groups */
-	RTC, TMU2, DMAC, USB, SCIF2, SCIF0,
+	RTC, WDT, REF_RCMI,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	/* IRQ0->5 are handled in setup-sh3.c */
 	INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
-	INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
-	INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
-	INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
-	INTC_VECT(SCIF0_TXI, 0x8e0),
-	INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
-	INTC_VECT(SCIF2_TXI, 0x960),
+	INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
+	INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
+	INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+	INTC_VECT(SCIF0, 0x8e0),
+	INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
+	INTC_VECT(SCIF2, 0x960),
 	INTC_VECT(ADC_ADI, 0x980),
-	INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40),
+	INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40),
 	INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
 	INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
-	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
-	INTC_VECT(RTC_CUI, 0x4c0),
+	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
 	INTC_VECT(WDT, 0x560),
 	INTC_VECT(REF_RCMI, 0x580),
 };
 
-static struct intc_group groups[] __initdata = {
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
-	INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
-	INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
-	INTC_GROUP(USB, USB_USI0, USB_USI1),
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
-	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
-};
-
 static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
 	{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
@@ -78,7 +63,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -86,12 +71,12 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xa4410000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 56, 57, 59 },
+		.irqs		= { 56, 56, 56 },
 	}, {
 		.mapbase	= 0xa4400000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 52, 53, 55 },
+		.irqs		= { 52, 52, 52 },
 	}, {
 		.flags = 0,
 	}
@@ -115,14 +100,6 @@ static struct resource rtc_resources[] = {
 		.start  = 20,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] =	{
-		.start	= 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] =	{
-		.start	= 22,
-		.flags  = IORESOURCE_IRQ,
-	},
 };
 
 static struct sh_rtc_platform_info rtc_info = {
-- 
cgit v1.2.3


From 56d604defa91684509ac842317ea14501f224299 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 19:20:48 +0900
Subject: sh: multiple vectors per irq - sh7710.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/setup-sh7710.c | 69 +++++++++++------------------------
 1 file changed, 21 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 77eee481de4..335098b66e2 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -1,7 +1,7 @@
 /*
  * SH3 Setup code for SH7710, SH7712
  *
- *  Copyright (C) 2006, 2007  Paul Mundt
+ *  Copyright (C) 2006 - 2009  Paul Mundt
  *  Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -20,59 +20,40 @@ enum {
 
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
-	DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
-	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
-	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
-	DMAC_DEI4, DMAC_DEI5,
-	IPSEC,
+	DMAC1, SCIF0, SCIF1, DMAC2, IPSEC,
 	EDMAC0, EDMAC1, EDMAC2,
-	SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI,
-	SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI,
-	TMU0, TMU1, TMU2,
-	RTC_ATI, RTC_PRI, RTC_CUI,
-	WDT,
-	REF,
+	SIOF0, SIOF1,
 
-	/* interrupt groups */
-	RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1,
+	TMU0, TMU1, TMU2,
+	RTC, WDT, REF,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	/* IRQ0->5 are handled in setup-sh3.c */
-	INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
-	INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
-	INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
-	INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
-	INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920),
-	INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960),
-	INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0),
+	INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860),
+	INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+	INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
+	INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920),
+	INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960),
+	INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
 #ifdef CONFIG_CPU_SUBTYPE_SH7710
 	INTC_VECT(IPSEC, 0xbe0),
 #endif
 	INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
 	INTC_VECT(EDMAC2, 0xc40),
-	INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20),
-	INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60),
-	INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0),
-	INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0),
+	INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20),
+	INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60),
+	INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0),
+	INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2, 0x440),
-	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
-	INTC_VECT(RTC_CUI, 0x4c0),
+	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+	INTC_VECT(RTC, 0x4c0),
 	INTC_VECT(WDT, 0x560),
 	INTC_VECT(REF, 0x580),
 };
 
-static struct intc_group groups[] __initdata = {
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
-	INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
-	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
-	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
-	INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5),
-	INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI),
-	INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI),
-};
-
 static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
 	{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
@@ -85,7 +66,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 static struct resource rtc_resources[] = {
@@ -98,14 +79,6 @@ static struct resource rtc_resources[] = {
 		.start  = 20,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] =	{
-		.start	= 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] =	{
-		.start	= 22,
-		.flags  = IORESOURCE_IRQ,
-	},
 };
 
 static struct sh_rtc_platform_info rtc_info = {
@@ -127,12 +100,12 @@ static struct plat_sci_port sci_platform_data[] = {
 		.mapbase	= 0xa4400000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 52, 53, 55, 54 },
+		.irqs		= { 52, 52, 52, 52 },
 	}, {
 		.mapbase	= 0xa4410000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs           = { 56, 57, 59, 58 },
+		.irqs           = { 56, 56, 56, 56 },
 	}, {
 
 		.flags = 0,
-- 
cgit v1.2.3


From edab56f4c90f45ba4e61d06d3fc9658da4e94bde Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 6 Mar 2009 19:21:02 +0900
Subject: sh: multiple vectors per irq - sh7720.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/setup-sh7720.c | 68 ++++++++++++-----------------------
 1 file changed, 23 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index f807a21b066..003874a2fd2 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -2,6 +2,7 @@
  * SH7720 Setup
  *
  *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *  Copyright (C) 2009  Paul Mundt
  *
  *  Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
  *
@@ -26,17 +27,7 @@ static struct resource rtc_resources[] = {
 		.flags	= IORESOURCE_IO,
 	},
 	[1] = {
-		/* Period IRQ */
-		.start	= 21,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= 22,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
+		/* Shared Period/Carry/Alarm IRQ */
 		.start	= 20,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -150,62 +141,49 @@ enum {
 	UNUSED = 0,
 
 	/* interrupt sources */
-	TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI,
-	WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+	TMU0, TMU1, TMU2, RTC,
+	WDT, REF_RCMI, SIM,
 	IRQ0, IRQ1, IRQ2, IRQ3,
 	USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
-	DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL,
-	ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT,
+	DMAC1, LCDC, SSL,
+	ADC, DMAC2, USBFI, CMT,
 	SCIF0, SCIF1,
-	PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC,
-	SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC,
+	PINT07, PINT815, TPU, IIC,
+	SIOF0, SIOF1, MMC, PCC,
 	USBHI, AFEIF,
 	H_UDI,
-	/* interrupt groups */
-	TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	/* IRQ0->5 are handled in setup-sh3.c */
 	INTC_VECT(TMU0, 0x400),       INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2, 0x440),       INTC_VECT(RTC_ATI, 0x480),
-	INTC_VECT(RTC_PRI, 0x4a0),    INTC_VECT(RTC_CUI, 0x4c0),
-	INTC_VECT(SIM_ERI, 0x4e0),    INTC_VECT(SIM_RXI, 0x500),
-	INTC_VECT(SIM_TXI, 0x520),    INTC_VECT(SIM_TEND, 0x540),
+	INTC_VECT(TMU2, 0x440),       INTC_VECT(RTC, 0x480),
+	INTC_VECT(RTC, 0x4a0),	      INTC_VECT(RTC, 0x4c0),
+	INTC_VECT(SIM, 0x4e0),	      INTC_VECT(SIM, 0x500),
+	INTC_VECT(SIM, 0x520),	      INTC_VECT(SIM, 0x540),
 	INTC_VECT(WDT, 0x560),        INTC_VECT(REF_RCMI, 0x580),
 	/* H_UDI cannot be masked */  INTC_VECT(TMU_SUNI, 0x6c0),
-	INTC_VECT(USBF_SPD, 0x6e0),   INTC_VECT(DMAC1_DEI0, 0x800),
-	INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840),
-	INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900),
+	INTC_VECT(USBF_SPD, 0x6e0),   INTC_VECT(DMAC1, 0x800),
+	INTC_VECT(DMAC1, 0x820),      INTC_VECT(DMAC1, 0x840),
+	INTC_VECT(DMAC1, 0x860),      INTC_VECT(LCDC, 0x900),
 #if defined(CONFIG_CPU_SUBTYPE_SH7720)
 	INTC_VECT(SSL, 0x980),
 #endif
-	INTC_VECT(USBFI0, 0xa20),     INTC_VECT(USBFI1, 0xa40),
+	INTC_VECT(USBFI, 0xa20),      INTC_VECT(USBFI, 0xa40),
 	INTC_VECT(USBHI, 0xa60),
-	INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0),
+	INTC_VECT(DMAC2, 0xb80),      INTC_VECT(DMAC2, 0xba0),
 	INTC_VECT(ADC, 0xbe0),        INTC_VECT(SCIF0, 0xc00),
 	INTC_VECT(SCIF1, 0xc20),      INTC_VECT(PINT07, 0xc80),
 	INTC_VECT(PINT815, 0xca0),    INTC_VECT(SIOF0, 0xd00),
-	INTC_VECT(SIOF1, 0xd20),      INTC_VECT(TPU0, 0xd80),
-	INTC_VECT(TPU1, 0xda0),       INTC_VECT(TPU2, 0xdc0),
-	INTC_VECT(TPU3, 0xde0),       INTC_VECT(IIC, 0xe00),
-	INTC_VECT(MMCI0, 0xe80),      INTC_VECT(MMCI1, 0xea0),
-	INTC_VECT(MMCI2, 0xec0),      INTC_VECT(MMCI3, 0xee0),
+	INTC_VECT(SIOF1, 0xd20),      INTC_VECT(TPU, 0xd80),
+	INTC_VECT(TPU, 0xda0),        INTC_VECT(TPU, 0xdc0),
+	INTC_VECT(TPU, 0xde0),        INTC_VECT(IIC, 0xe00),
+	INTC_VECT(MMC, 0xe80),        INTC_VECT(MMC, 0xea0),
+	INTC_VECT(MMC, 0xec0),        INTC_VECT(MMC, 0xee0),
 	INTC_VECT(CMT, 0xf00),        INTC_VECT(PCC, 0xf60),
 	INTC_VECT(AFEIF, 0xfe0),
 };
 
-static struct intc_group groups[] __initdata = {
-	INTC_GROUP(TMU, TMU0, TMU1, TMU2),
-	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
-	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
-	INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3),
-	INTC_GROUP(USBFI, USBFI0, USBFI1),
-	INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5),
-	INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3),
-	INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3),
-};
-
 static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
 	{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
@@ -219,7 +197,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL,
 		NULL, prio_registers, NULL);
 
 void __init plat_irq_setup(void)
-- 
cgit v1.2.3


From f8cf8176c7fc2c790e900595755b93e30633754d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Wed, 4 Mar 2009 00:49:31 +0000
Subject: ASoC: Add s3c64xx-i2s support

Add the initial code to support the S3C64XX I2S hardware using the
s3c-i2s-v2 core code.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 25d4058bcfe..a5600b381d4 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -33,6 +33,9 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
+#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
+
 #define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
 #define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
 #define S3C2412_IISMOD_SLAVE		(2 << 10)
-- 
cgit v1.2.3


From 20a41eac4fbaa22d051d0fbaeaf3315d2d8c4860 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 4 Mar 2009 21:16:57 +0100
Subject: ASoC: Fix name of register bit in pxa-ssp

A bit in PXA's SSCR0 register was erroneously named ADC but its name is
in fact ACS (audio clock select).

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/include/mach/regs-ssp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index 3c04cde2cf1..cacdcae451e 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -47,7 +47,7 @@
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
-- 
cgit v1.2.3


From b0c5033f02182d1e9634edc737df88b82264e820 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 5 Mar 2009 14:21:26 +0100
Subject: ASoC: add two more bitfields for PXA SSP

Add two more bitfields for the PSP register. As they seem to exist
for PXA3xx only, define them conditionally.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/include/mach/regs-ssp.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index cacdcae451e..f43905a2773 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -106,6 +106,11 @@
 #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
+#if defined(CONFIG_PXA3xx)
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#endif
+
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
-- 
cgit v1.2.3


From 3a450de1365d20afde406f0d9b2931a5e4a4fd6a Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Fri, 6 Mar 2009 17:30:56 -0600
Subject: x86: UV: remove uv_flush_tlb_others() WARN_ON

In uv_flush_tlb_others() (arch/x86/kernel/tlb_uv.c),
the "WARN_ON(!in_atomic())" fails if CONFIG_PREEMPT is not enabled.

And CONFIG_PREEMPT is not enabled by default in the distribution that
most UV owners will use.

We could #ifdef CONFIG_PREEMPT the warning, but that is not good form.
And there seems to be no suitable fix to in_atomic() when CONFIG_PREMPT
is not on.

As Ingo commented:

  > and we have no proper primitive to test for atomicity. (mainly
  > because we dont know about atomicity on a non-preempt kernel)

So we drop the WARN_ON.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index f04549afcfe..d038b9c45cf 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -314,8 +314,6 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 	int locals = 0;
 	struct bau_desc *bau_desc;
 
-	WARN_ON(!in_atomic());
-
 	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
 
 	uv_cpu = uv_blade_processor_id();
-- 
cgit v1.2.3


From a3f66351b3cc89011e8a34068c245b413ce696d6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:05 +0000
Subject: [ARM] S3C: Nove <plat/pm.h> from plat-s3c24xx to plat-s3fc

Move the <plat/pm.h> header to plat-s3c as preparation
for moving parts of the s3c24xx pm support which are
common into the plat-s3c support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/pm.h     | 73 +++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/pm.h | 73 ---------------------------------
 2 files changed, 73 insertions(+), 73 deletions(-)
 create mode 100644 arch/arm/plat-s3c/include/plat/pm.h
 delete mode 100644 arch/arm/plat-s3c24xx/include/plat/pm.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
new file mode 100644
index 00000000000..cc623667e48
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -0,0 +1,73 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c2410_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c2410_pm_init(void);
+
+#else
+
+static inline int s3c2410_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
+extern void s3c2410_cpu_resume(void);
+
+extern unsigned long s3c2410_sleep_save_phys;
+
+/* sleep save info */
+
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h
deleted file mode 100644
index cc623667e48..00000000000
--- a/arch/arm/plat-s3c24xx/include/plat/pm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int  s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-- 
cgit v1.2.3


From 6419711a164ba1304fa8fbb75ae9485455e04dcd Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:06 +0000
Subject: [ARM] S3C: Move PM support functions to common location

Start moving the PM code by moving all the common support functions
to a common location in arch/arm/plat-s3c. With the move we rename
the functions from s3cxxx_ to s3c_ to fit the new location.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/pm.c          |  11 +---
 arch/arm/mach-s3c2412/pm.c          |   4 +-
 arch/arm/plat-s3c/Makefile          |   4 ++
 arch/arm/plat-s3c/include/plat/pm.h |  36 +++++++++++-
 arch/arm/plat-s3c/pm.c              |  97 +++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/irq.c         |   4 +-
 arch/arm/plat-s3c24xx/pm.c          | 113 ++++++++----------------------------
 arch/arm/plat-s3c24xx/s3c244x.c     |   4 +-
 arch/arm/plat-s3c24xx/sleep.S       |   8 +--
 9 files changed, 171 insertions(+), 110 deletions(-)
 create mode 100644 arch/arm/plat-s3c/pm.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index a6970f61319..72f96869aa9 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -37,21 +37,14 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
 static void s3c2410_pm_prepare(void)
 {
 	/* ensure at least GSTATUS3 has the resume address */
 
 	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
 
-	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
 
 	if (machine_is_h1940()) {
 		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 217e9e4ed45..c9cfe40e21f 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] = {
 
 static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
 {
-	s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
 	return 0;
 }
 
@@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_device *dev)
 	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
 	__raw_writel(tmp, S3C2412_PWRCFG);
 
-	s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+	s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
 	return 0;
 }
 
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 39195f972d5..afd8d089ba1 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,6 +18,10 @@ obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
 
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index cc623667e48..a1520997ab8 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -1,6 +1,7 @@
 /* linux/include/asm-arm/plat-s3c24xx/pm.h
  *
  * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
  *	Written by Ben Dooks, <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -49,10 +50,18 @@ extern int  s3c2410_cpu_save(unsigned long *saveblk);
 extern void s3c2410_cpu_suspend(void);
 extern void s3c2410_cpu_resume(void);
 
-extern unsigned long s3c2410_sleep_save_phys;
+extern unsigned long s3c_sleep_save_phys;
 
 /* sleep save info */
 
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
 struct sleep_save {
 	void __iomem	*reg;
 	unsigned long	val;
@@ -61,8 +70,11 @@ struct sleep_save {
 #define SAVE_ITEM(x) \
 	{ .reg = (x) }
 
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
 #ifdef CONFIG_PM
 extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
@@ -71,3 +83,21 @@ extern int s3c24xx_irq_resume(struct sys_device *dev);
 #define s3c24xx_irq_suspend NULL
 #define s3c24xx_irq_resume  NULL
 #endif
+
+/* PM debug functions */
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+#else
+#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
new file mode 100644
index 00000000000..122e9b91a7f
--- /dev/null
+++ b/arch/arm/plat-s3c/pm.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004,2006,2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <plat/pm.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsprintf(buff, fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+#endif /* CONFIG_S3C2410_PM_DEBUG */
+
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = __raw_readl(ptr->reg);
+		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++)
+		__raw_writel(ptr->val, ptr->reg);
+}
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 0192ecdc144..2fa8c9f4b35 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -616,7 +616,7 @@ int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
 	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
 		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
 
-	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
 
 	return 0;
@@ -632,7 +632,7 @@ int s3c24xx_irq_resume(struct sys_device *dev)
 	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
 		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
 
-	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
 
 	return 0;
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 34ef18e5b2a..c161f9c9a1d 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -49,9 +49,6 @@
 
 #include <plat/pm.h>
 
-/* for external use */
-
-unsigned long s3c_pm_flags;
 
 #define PFX "s3c24xx-pm: "
 
@@ -143,20 +140,6 @@ static struct sleep_save uart_save[] = {
  * system never wakes up from the sleep
 */
 
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
 static void s3c2410_pm_debug_init(void)
 {
 	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
@@ -170,10 +153,7 @@ static void s3c2410_pm_debug_init(void)
 	udelay(10);
 }
 
-#define DBG(fmt...) pm_dbg(fmt)
 #else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-
 #define s3c2410_pm_debug_init() do { } while(0)
 
 static struct sleep_save uart_save[] = {};
@@ -211,7 +191,7 @@ static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
 
 		if ((ptr->flags & IORESOURCE_MEM) &&
 		    strcmp(ptr->name, "System RAM") == 0) {
-			DBG("Found system RAM at %08lx..%08lx\n",
+			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
 			    ptr->start, ptr->end);
 			arg = (fn)(ptr, arg);
 		}
@@ -232,7 +212,7 @@ static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
 	size += CHECK_CHUNKSIZE-1;
 	size /= CHECK_CHUNKSIZE;
 
-	DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
 
 	*val += size * sizeof(u32);
 	return val;
@@ -252,7 +232,7 @@ static void s3c2410_pm_check_prepare(void)
 
 	s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
 
-	DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+	S3C_PMDBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
 
 	crcs = kmalloc(crc_size+4, GFP_KERNEL);
 	if (crcs == NULL)
@@ -308,7 +288,7 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
 
 static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
 {
-	void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
+	void *save_at = phys_to_virt(s3c_sleep_save_phys);
 	unsigned long addr;
 	unsigned long left;
 	void *ptr;
@@ -324,12 +304,12 @@ static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
 		ptr = phys_to_virt(addr);
 
 		if (in_region(ptr, left, crcs, crc_size)) {
-			DBG("skipping %08lx, has crc block in\n", addr);
+			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
 			goto skip_check;
 		}
 
 		if (in_region(ptr, left, save_at, 32*4 )) {
-			DBG("skipping %08lx, has save block in\n", addr);
+			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
 			goto skip_check;
 		}
 
@@ -340,7 +320,7 @@ static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
 			printk(KERN_ERR PFX "Restore CRC error at "
 			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
 
-			DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
 			    addr, calc, *val);
 		}
 
@@ -373,49 +353,6 @@ static void s3c2410_pm_check_restore(void)
 #define s3c2410_pm_check_store()   do { } while(0)
 #endif
 
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
-
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
-
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
-
 /* s3c2410_pm_show_resume_irqs
  *
  * print any IRQs asserted at resume time (ie, we woke from)
@@ -430,7 +367,7 @@ static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
 
 	for (i = 0; i <= 31; i++) {
 		if ((which) & (1L<<i)) {
-			DBG("IRQ %d asserted at resume\n", start+i);
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
 		}
 	}
 }
@@ -456,10 +393,10 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
 
 	if (!irqstate) {
 		if (pinstate == S3C2410_GPIO_IRQ)
-			DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+			S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
 	} else {
 		if (pinstate == S3C2410_GPIO_IRQ) {
-			DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
 			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
 		}
 	}
@@ -646,8 +583,8 @@ static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
 		__raw_writel(gps->gpup, base + OFFS_UP);
 	}
 
-	DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
-	    index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+	S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+		  index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
 }
 
 
@@ -684,7 +621,7 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	s3c2410_pm_debug_init();
 
-	DBG("s3c2410_pm_enter(%d)\n", state);
+	S3C_PMDBG("s3c2410_pm_enter(%d)\n", state);
 
 	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
 		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
@@ -709,22 +646,22 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	/* store the physical address of the register recovery block */
 
-	s3c2410_sleep_save_phys = virt_to_phys(regs_save);
+	s3c_sleep_save_phys = virt_to_phys(regs_save);
 
-	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
+	S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
 
 	/* save all necessary core registers not covered by the drivers */
 
 	s3c2410_pm_save_gpios();
-	s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-	s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
-	s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
 
 	/* set the irq configuration for wake */
 
 	s3c2410_pm_configure_extint();
 
-	DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
 	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
 
 	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
@@ -765,16 +702,16 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	/* restore the system state */
 
-	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-	s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
 	s3c2410_pm_restore_gpios();
 
 	s3c2410_pm_debug_init();
 
 	/* check what irq (if any) restored the system */
 
-	DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
 	    __raw_readl(S3C2410_SRCPND),
 	    __raw_readl(S3C2410_EINTPEND));
 
@@ -784,13 +721,13 @@ static int s3c2410_pm_enter(suspend_state_t state)
 	s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
 				    s3c_irqwake_eintmask);
 
-	DBG("post sleep, preparing to return\n");
+	S3C_PMDBG("post sleep, preparing to return\n");
 
 	s3c2410_pm_check_restore();
 
 	/* ok, let's return from sleep */
 
-	DBG("S3C2410 PM Resume (post-restore)\n");
+	S3C_PMDBG("S3C2410 PM Resume (post-restore)\n");
 	return 0;
 }
 
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index c1de6bb0101..1364317d421 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -145,13 +145,13 @@ static struct sleep_save s3c244x_sleep[] = {
 
 static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
 {
-	s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
 	return 0;
 }
 
 static int s3c244x_resume(struct sys_device *dev)
 {
-	s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
 	return 0;
 }
 
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 76594b21280..7c1955ff317 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -84,7 +84,7 @@ resume_with_mmu:
 	.ltorg
 
 	@@ the next bits sit in the .data segment, even though they
-	@@ happen to be code... the s3c2410_sleep_save_phys needs to be
+	@@ happen to be code... the s3c_sleep_save_phys needs to be
 	@@ accessed by the resume code before it can restore the MMU.
 	@@ This means that the variable has to be close enough for the
 	@@ code to read it... since the .text segment needs to be RO,
@@ -92,8 +92,8 @@ resume_with_mmu:
 
 	.data
 
-	.global	s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
 	.word	0
 
 
@@ -145,7 +145,7 @@ ENTRY(s3c2410_cpu_resume)
 	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
 	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
 
-	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
+	ldr	r0, s3c_sleep_save_phys		@ address of restore block
 	ldmia	r0, { r4 - r13 }
 
 	mcr	p15, 0, r4, c13, c0, 0		@ PID
-- 
cgit v1.2.3


From 549c7e33aeb9bfe441ecf68639d2227bb90978e7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:07 +0000
Subject: [ARM] S3C: Split the resume memory check code from pm.c

Split the optional memory check code out of the pm.c file
as it is quite a big #ifdef block and as-such can be moved
out and simply compiled when the configuration is set.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile          |   1 +
 arch/arm/plat-s3c/include/plat/pm.h |  12 ++
 arch/arm/plat-s3c/pm-check.c        | 220 ++++++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/pm.c          | 210 ++--------------------------------
 4 files changed, 240 insertions(+), 203 deletions(-)
 create mode 100644 arch/arm/plat-s3c/pm-check.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index afd8d089ba1..8d7815d25a5 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -21,6 +21,7 @@ obj-y				+= gpio-config.o
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
 # devices
 
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index a1520997ab8..95c2612d497 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -101,3 +101,15 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #else
 #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
 #endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_S3C2410_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while(0)
+#define s3c_pm_check_restore() do { } while(0)
+#define s3c_pm_check_store()   do { } while(0)
+#endif
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
new file mode 100644
index 00000000000..95ba7693b5a
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -0,0 +1,220 @@
+/* linux/arch/arm/plat-s3c/pm-check.c
+ *  originally in linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+
+#include <plat/pm.h>
+
+#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size;	/* size needed for the crc block */
+static u32 *crcs;	/* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+	while (ptr != NULL) {
+		if (ptr->child != NULL)
+			s3c_pm_run_res(ptr->child, fn, arg);
+
+		if ((ptr->flags & IORESOURCE_MEM) &&
+		    strcmp(ptr->name, "System RAM") == 0) {
+			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+			    ptr->start, ptr->end);
+			arg = (fn)(ptr, arg);
+		}
+
+		ptr = ptr->sibling;
+	}
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+	s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+	u32 size = (u32)(res->end - res->start)+1;
+
+	size += CHECK_CHUNKSIZE-1;
+	size /= CHECK_CHUNKSIZE;
+
+	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+
+	*val += size * sizeof(u32);
+	return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+	crc_size = 0;
+
+	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+	crcs = kmalloc(crc_size+4, GFP_KERNEL);
+	if (crcs == NULL)
+		printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+	unsigned long addr, left;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		*val = crc32_le(~0, phys_to_virt(addr), left);
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+	if ((what+whatsz) < ptr)
+		return 0;
+
+	if (what > (ptr+size))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * s3c_pm_runcheck*() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @vak: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+	void *save_at = phys_to_virt(s3c_sleep_save_phys);
+	unsigned long addr;
+	unsigned long left;
+	void *ptr;
+	u32 calc;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		ptr = phys_to_virt(addr);
+
+		if (in_region(ptr, left, crcs, crc_size)) {
+			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, save_at, 32*4 )) {
+			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
+			goto skip_check;
+		}
+
+		/* calculate and check the checksum */
+
+		calc = crc32_le(~0, ptr, left);
+		if (calc != *val) {
+			printk(KERN_ERR "Restore CRC error at "
+			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			    addr, calc, *val);
+		}
+
+	skip_check:
+		val++;
+	}
+
+	return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+	if (crcs != NULL) {
+		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+		kfree(crcs);
+		crcs = NULL;
+	}
+}
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index c161f9c9a1d..e2ae12da16e 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -31,8 +31,6 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -159,200 +157,6 @@ static void s3c2410_pm_debug_init(void)
 static struct sleep_save uart_save[] = {};
 #endif
 
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c2410_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
-			    ptr->start, ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)(res->end - res->start)+1;
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
-{
-	crc_size = 0;
-
-	s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
-
-	S3C_PMDBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
-
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
-	}
-
-	return val;
-}
-
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
-	void *save_at = phys_to_virt(s3c_sleep_save_phys);
-	unsigned long addr;
-	unsigned long left;
-	void *ptr;
-	u32 calc;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		ptr = phys_to_virt(addr);
-
-		if (in_region(ptr, left, crcs, crc_size)) {
-			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, save_at, 32*4 )) {
-			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR PFX "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
-	}
-
-	return val;
-}
-
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
-	if (crcs != NULL) {
-		s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
-		kfree(crcs);
-		crcs = NULL;
-	}
-}
-
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store()   do { } while(0)
-#endif
-
 /* s3c2410_pm_show_resume_irqs
  *
  * print any IRQs asserted at resume time (ie, we woke from)
@@ -372,13 +176,13 @@ static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
 	}
 }
 
-/* s3c2410_pm_check_resume_pin
+/* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
  * make any necessary adjustments if it is not
 */
 
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
 {
 	unsigned long irqstate;
 	unsigned long pinstate;
@@ -417,11 +221,11 @@ static void s3c2410_pm_configure_extint(void)
 	*/
 
 	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
 	}
 
 	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
 	}
 }
 
@@ -642,7 +446,7 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	/* prepare check area if configured */
 
-	s3c2410_pm_check_prepare();
+	s3c_pm_check_prepare();
 
 	/* store the physical address of the register recovery block */
 
@@ -681,7 +485,7 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	flush_cache_all();
 
-	s3c2410_pm_check_store();
+	s3c_pm_check_store();
 
 	/* send the cpu to sleep... */
 
@@ -723,7 +527,7 @@ static int s3c2410_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("post sleep, preparing to return\n");
 
-	s3c2410_pm_check_restore();
+	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
 
-- 
cgit v1.2.3


From 2261e0e6e3991d4c5f33e9fedadfc465eedc05a7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:08 +0000
Subject: [ARM] S3C: Move plat-s3c24xx pm.c support into plat-s3c

Move parts of the core and debug suspend code into the
plat-s3c for use with the new s3c64xx code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/pm.h          |  27 ++++
 arch/arm/plat-s3c/pm.c                       | 211 +++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/pm-core.h |  59 +++++++
 arch/arm/plat-s3c24xx/pm.c                   | 224 ++-------------------------
 4 files changed, 311 insertions(+), 210 deletions(-)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/pm-core.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 95c2612d497..42c75e6d2ba 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -113,3 +113,30 @@ extern void s3c_pm_check_store(void);
 #define s3c_pm_check_restore() do { } while(0)
 #define s3c_pm_check_store()   do { } while(0)
 #endif
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+/**
+ * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void s3c_pm_restore_gpios(void);
+
+/**
+ * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ */
+extern void s3c_pm_save_gpios(void);
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 122e9b91a7f..fea58bea973 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -15,14 +15,32 @@
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
 #include <linux/io.h>
 
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
+
 #include <plat/pm.h>
+#include <plat/pm-core.h>
 
 /* for external use */
 
 unsigned long s3c_pm_flags;
 
+/* Debug code:
+ *
+ * This code supports debug output to the low level UARTs for use on
+ * resume before the console layer is available.
+*/
+
 #ifdef CONFIG_S3C2410_PM_DEBUG
 extern void printascii(const char *);
 
@@ -37,8 +55,51 @@ void s3c_pm_dbg(const char *fmt, ...)
 
 	printascii(buff);
 }
+
+static inline void s3c_pm_debug_init(void)
+{
+	/* restart uart clocks so we can use them to output */
+	s3c_pm_debug_init_uart();
+}
+
+#else
+#define s3c_pm_debug_init() do { } while(0)
+
 #endif /* CONFIG_S3C2410_PM_DEBUG */
 
+/* Save the UART configurations if we are configured for debug. */
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+#define SAVE_UART(va) \
+	SAVE_ITEM((va) + S3C2410_ULCON), \
+	SAVE_ITEM((va) + S3C2410_UCON), \
+	SAVE_ITEM((va) + S3C2410_UFCON), \
+	SAVE_ITEM((va) + S3C2410_UMCON), \
+	SAVE_ITEM((va) + S3C2410_UBRDIV)
+
+static struct sleep_save uart_save[] = {
+	SAVE_UART(S3C_VA_UART0),
+	SAVE_UART(S3C_VA_UART1),
+#ifndef CONFIG_CPU_S3C2400
+	SAVE_UART(S3C_VA_UART2),
+#endif
+};
+
+static void s3c_pm_save_uart(void)
+{
+	s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+}
+
+static void s3c_pm_restore_uart(void)
+{
+	s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+}
+#else
+static void s3c_pm_save_uart(void) { }
+static void s3c_pm_restore_uart(void) { }
+#endif
+
 
 /* helper functions to save and restore register state */
 
@@ -95,3 +156,153 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
 	for (; count > 0; count--, ptr++)
 		__raw_writel(ptr->val, ptr->reg);
 }
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+				    unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if (which & (1L<<i)) {
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+	unsigned long regs_save[16];
+
+	/* ensure the debug is initialised (if enabled) */
+
+	s3c_pm_debug_init();
+
+	S3C_PMDBG("%s(%d)\n", __func__, state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	/* prepare check area if configured */
+
+	s3c_pm_check_prepare();
+
+	/* store the physical address of the register recovery block */
+
+	s3c_sleep_save_phys = virt_to_phys(regs_save);
+
+	S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
+
+	/* save all necessary core registers not covered by the drivers */
+
+	s3c_pm_save_gpios();
+	s3c_pm_save_uart();
+	s3c_pm_save_core();
+
+	/* set the irq configuration for wake */
+
+	s3c_pm_configure_extint();
+
+	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	s3c_pm_arch_prepare_irqs();
+
+	/* call cpu specific preparation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	s3c_pm_arch_stop_clocks();
+
+	/* s3c2410_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state, so use the return
+	 * code to differentiate return from save and return from sleep */
+
+	if (s3c2410_cpu_save(regs_save) == 0) {
+		flush_cache_all();
+		pm_cpu_sleep();
+	}
+
+	/* restore the cpu state using the kernel's cpu init code. */
+
+	cpu_init();
+
+	/* restore the system state */
+
+	s3c_pm_restore_core();
+	s3c_pm_restore_uart();
+	s3c_pm_restore_gpios();
+
+	s3c_pm_debug_init();
+
+	/* check what irq (if any) restored the system */
+
+	s3c_pm_arch_show_resume_irqs();
+
+	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+	s3c_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	S3C_PMDBG("S3C PM Resume (post-restore)\n");
+	return 0;
+}
+
+static struct platform_suspend_ops s3c_pm_ops = {
+	.enter		= s3c_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+
+/* s3c2410_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c2410_pm_init(void)
+{
+	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+	suspend_set_ops(&s3c_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
new file mode 100644
index 00000000000..c75882113e0
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -0,0 +1,59 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+	/* re-start uart clocks */
+	tmp |= S3C2410_CLKCON_UART0;
+	tmp |= S3C2410_CLKCON_UART1;
+	tmp |= S3C2410_CLKCON_UART2;
+
+	__raw_writel(tmp, S3C2410_CLKCON);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+	/* ack any outstanding external interrupts before we go to sleep */
+
+	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+}
+
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+				    unsigned long mask);
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+		  __raw_readl(S3C2410_SRCPND),
+		  __raw_readl(S3C2410_EINTPEND));
+
+	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+				s3c_irqwake_intmask);
+
+	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+				s3c_irqwake_eintmask);
+}
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index e2ae12da16e..062a29339a9 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -34,9 +34,6 @@
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
-#include <asm/cacheflush.h>
-#include <mach/hardware.h>
-
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
@@ -47,7 +44,6 @@
 
 #include <plat/pm.h>
 
-
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
@@ -115,66 +111,6 @@ static struct sleep_save misc_save[] = {
 	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
-#ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
-	SAVE_ITEM((va) + S3C2410_ULCON), \
-	SAVE_ITEM((va) + S3C2410_UCON), \
-	SAVE_ITEM((va) + S3C2410_UFCON), \
-	SAVE_ITEM((va) + S3C2410_UMCON), \
-	SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
-	SAVE_UART(S3C24XX_VA_UART0),
-	SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
-	SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-static void s3c2410_pm_debug_init(void)
-{
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-}
-
-#else
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
-#endif
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
-					unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if ((which) & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
 
 /* s3c_pm_check_resume_pin
  *
@@ -206,12 +142,12 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
 	}
 }
 
-/* s3c2410_pm_configure_extint
+/* s3c_pm_configure_extint
  *
  * configure all external interrupt pins
 */
 
-static void s3c2410_pm_configure_extint(void)
+void s3c_pm_configure_extint(void)
 {
 	int pin;
 
@@ -235,12 +171,12 @@ static void s3c2410_pm_configure_extint(void)
 #define OFFS_DAT	(S3C2410_GPADAT - S3C2410_GPACON)
 #define OFFS_UP		(S3C2410_GPBUP  - S3C2410_GPBCON)
 
-/* s3c2410_pm_save_gpios()
+/* s3c_pm_save_gpios()
  *
  * Save the state of the GPIOs
  */
 
-static void s3c2410_pm_save_gpios(void)
+void s3c_pm_save_gpios(void)
 {
 	struct gpio_sleep *gps = gpio_save;
 	unsigned int gpio;
@@ -279,7 +215,10 @@ static inline int is_out(unsigned long con)
 	return con == 1;
 }
 
-/* s3c2410_pm_restore_gpio()
+/**
+ * s3c2410_pm_restore_gpio() - restore the given GPIO bank
+ * @index: The number of the GPIO bank being resumed.
+ * @gps: The sleep confgiuration for the bank.
  *
  * Restore one of the GPIO banks that was saved during suspend. This is
  * not as simple as once thought, due to the possibility of glitches
@@ -397,7 +336,7 @@ static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
  * Restore the state of the GPIOs
  */
 
-static void s3c2410_pm_restore_gpios(void)
+void s3c_pm_restore_gpios(void)
 {
 	struct gpio_sleep *gps = gpio_save;
 	int gpio;
@@ -407,150 +346,15 @@ static void s3c2410_pm_restore_gpios(void)
 	}
 }
 
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
+void s3c_pm_restore_core(void)
 {
-	unsigned long regs_save[16];
-
-	/* ensure the debug is initialised (if enabled) */
-
-	s3c2410_pm_debug_init();
-
-	S3C_PMDBG("s3c2410_pm_enter(%d)\n", state);
-
-	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
-		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
-		return -EINVAL;
-	}
-
-	/* check if we have anything to wake-up with... bad things seem
-	 * to happen if you suspend with no wakeup (system will often
-	 * require a full power-cycle)
-	*/
-
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
-	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
-		printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
-		printk(KERN_ERR PFX "Aborting sleep\n");
-		return -EINVAL;
-	}
-
-	/* prepare check area if configured */
-
-	s3c_pm_check_prepare();
-
-	/* store the physical address of the register recovery block */
-
-	s3c_sleep_save_phys = virt_to_phys(regs_save);
-
-	S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
-	/* save all necessary core registers not covered by the drivers */
-
-	s3c2410_pm_save_gpios();
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
-	/* set the irq configuration for wake */
-
-	s3c2410_pm_configure_extint();
-
-	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
-	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-	/* call cpu specific preparation */
-
-	pm_cpu_prep();
-
-	/* flush cache back to ram */
-
-	flush_cache_all();
-
-	s3c_pm_check_store();
-
-	/* send the cpu to sleep... */
-
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-
-	/* s3c2410_cpu_save will also act as our return point from when
-	 * we resume as it saves its own register state, so use the return
-	 * code to differentiate return from save and return from sleep */
-
-	if (s3c2410_cpu_save(regs_save) == 0) {
-		flush_cache_all();
-		pm_cpu_sleep();
-	}
-
-	/* restore the cpu state */
-
-	cpu_init();
-
-	/* restore the system state */
-
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-	s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-	s3c2410_pm_restore_gpios();
-
-	s3c2410_pm_debug_init();
-
-	/* check what irq (if any) restored the system */
-
-	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-	    __raw_readl(S3C2410_SRCPND),
-	    __raw_readl(S3C2410_EINTPEND));
-
-	s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				    s3c_irqwake_intmask);
-
-	s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				    s3c_irqwake_eintmask);
-
-	S3C_PMDBG("post sleep, preparing to return\n");
-
-	s3c_pm_check_restore();
-
-	/* ok, let's return from sleep */
-
-	S3C_PMDBG("S3C2410 PM Resume (post-restore)\n");
-	return 0;
 }
 
-static struct platform_suspend_ops s3c2410_pm_ops = {
-	.enter		= s3c2410_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c2410_pm_init(void)
+void s3c_pm_save_core(void)
 {
-	printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
-	suspend_set_ops(&s3c2410_pm_ops);
-	return 0;
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
+
-- 
cgit v1.2.3


From 840eeeb880e03927588e0e971cb426441795ff14 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:09 +0000
Subject: [ARM] S3C: Fix warnings in the PM memory CRC code

Fix warnings from struct resource being bigger than unsigned long by
forcing the type. We are only a 32bit platform so no physical memory
addresses will be too big to fit in this.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/pm-check.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 95ba7693b5a..b221470e3bf 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -55,7 +55,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
 		if ((ptr->flags & IORESOURCE_MEM) &&
 		    strcmp(ptr->name, "System RAM") == 0) {
 			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
-			    ptr->start, ptr->end);
+				  (unsigned long)ptr->start,
+				  (unsigned long)ptr->end);
 			arg = (fn)(ptr, arg);
 		}
 
@@ -75,7 +76,8 @@ static u32 *s3c_pm_countram(struct resource *res, u32 *val)
 	size += CHECK_CHUNKSIZE-1;
 	size /= CHECK_CHUNKSIZE;
 
-	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+		  (unsigned long)res->start, (unsigned long)res->end, size);
 
 	*val += size * sizeof(u32);
 	return val;
-- 
cgit v1.2.3


From 65fa22b73f95c481db125ba9a34de1553c638548 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:10 +0000
Subject: [ARM] S3C24XX: Split PM code from arch/arm/plat-s3c24xx/irq.c

Split the PM code out of arch/arm/plat-s3c24xx/irq.c to
remove some of the #ifdefs being used. Also fix a couple
of places where the absecnce of a function was redefined
to the same thing.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Makefile           |   1 +
 arch/arm/plat-s3c24xx/include/plat/irq.h |   8 +++
 arch/arm/plat-s3c24xx/irq-pm.c           | 116 ++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/irq.c              | 118 -------------------------------
 4 files changed, 125 insertions(+), 118 deletions(-)
 create mode 100644 arch/arm/plat-s3c24xx/irq-pm.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 1e0767b266b..636cb12711d 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 45746a99534..97b6884ea0d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -10,6 +10,12 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
 #define irqdbf(x...)
 #define irqdbf2(x...)
 
@@ -102,7 +108,9 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
 
 #ifdef CONFIG_PM
 extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
 #else
+#define s3c_irqext_wake NULL
 #define s3c_irq_wake NULL
 #endif
 
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
new file mode 100644
index 00000000000..86c68804f09
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -0,0 +1,116 @@
+/* linux/arch/arm/plat-s3c24xx/irq-om.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C24XX - IRQ PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int
+s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+	if (!(s3c_irqwake_intallow & irqbit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_intmask |= irqbit;
+	else
+		s3c_irqwake_intmask &= ~irqbit;
+
+	return 0;
+}
+
+int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long bit = 1L << (irqno - EXTINT_OFF);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2410_INTMSK),
+	SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 2fa8c9f4b35..33fde662ce6 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -55,81 +55,16 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
 #include <asm/mach/irq.h>
 
 #include <plat/regs-irqtype.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/irq.h>
 
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
 static void
 s3c_irq_mask(unsigned int irqno)
 {
@@ -590,59 +525,6 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 	}
 }
 
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
-- 
cgit v1.2.3


From 7299a40918e15d5f9b4bc7fcb02163c335d92e43 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:11 +0000
Subject: [ARM] S3C24XX: Remove changelog from arch/arm/plat-s3c24xx/irq.c

Remove the changelog, this file is in version control.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/irq.c | 34 +---------------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 33fde662ce6..958737775ad 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003,2004 Simtec Electronics 
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -16,38 +16,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog:
- *
- *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
- *                Fixed compile warnings
- *
- *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
- *                Fixed s3c_extirq_type
- *
- *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- *                Addition of ADC/TC demux
- *
- *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
- *		  Fix for set_irq_type() on low EINT numbers
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Tidy up KF's patch and sort out new release
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Add support for power management controls
- *
- *   04-Nov-2004  Ben Dooks
- *		  Fix standard IRQ wake for EINT0..4 and RTC
- *
- *   22-Feb-2005  Ben Dooks
- *		  Fixed edge-triggering on ADC IRQ
- *
- *   28-Jun-2005  Ben Dooks
- *		  Mark IRQ_LCD valid
- *
- *   25-Jul-2005  Ben Dooks
- *		  Split the S3C2440 IRQ code to separate file
 */
 
 #include <linux/init.h>
-- 
cgit v1.2.3


From 56b34426888d35b3b6367c216bbfb17b82b4f0ac Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:12 +0000
Subject: [ARM] S3C: Make IRQ_EINT sleep control common

Move the IRQ_EINT sleep control to be available to all
s3c impelmentations. Since s3c_irqext_wake is not large,
place it in arch/arm/plat-s3c/pm.c as adding it to a new
file would be a waste of compile time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h |  2 +-
 arch/arm/mach-s3c24a0/include/mach/irqs.h |  2 ++
 arch/arm/plat-s3c/include/plat/pm.h       |  2 ++
 arch/arm/plat-s3c/pm.c                    | 24 ++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/irq.h  |  2 --
 arch/arm/plat-s3c24xx/irq-pm.c            | 23 +----------------------
 6 files changed, 30 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 49efce8cd4a..0cd89b73577 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -80,7 +80,7 @@
 #define IRQ_EINT22     S3C2410_IRQ(50)
 #define IRQ_EINT23     S3C2410_IRQ(51)
 
-
+#define IRQ_EINT_BIT(x)	((x) - (IRQ_EINT4 + 4))
 #define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
 
 #define IRQ_LCD_FIFO   S3C2410_IRQ(52)
diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h
index ae8c0e35978..83ce2a7a9da 100644
--- a/arch/arm/mach-s3c24a0/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h
@@ -70,6 +70,8 @@
 #define IRQ_EINT17	S3C2410_IRQ(49)
 #define IRQ_EINT18	S3C2410_IRQ(50)
 
+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00)
+
 /* SUB IRQS */
 #define IRQ_S3CUART_RX0		S3C2410_IRQ(51)	/* 67 */
 #define IRQ_S3CUART_TX0		S3C2410_IRQ(52)
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 42c75e6d2ba..5e27de955da 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -77,9 +77,11 @@ extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
 #ifdef CONFIG_PM
+extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
 extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
 extern int s3c24xx_irq_resume(struct sys_device *dev);
 #else
+#define s3c_irqext_wake NULL
 #define s3c24xx_irq_suspend NULL
 #define s3c24xx_irq_resume  NULL
 #endif
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index fea58bea973..7c736deff8a 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -27,6 +27,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
+#include <asm/irq.h>
 
 #include <plat/pm.h>
 #include <plat/pm-core.h>
@@ -100,6 +101,29 @@ static void s3c_pm_save_uart(void) { }
 static void s3c_pm_restore_uart(void) { }
 #endif
 
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
 
 /* helper functions to save and restore register state */
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 97b6884ea0d..69e1be8bec3 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -108,9 +108,7 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
 
 #ifdef CONFIG_PM
 extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
-extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
 #else
-#define s3c_irqext_wake NULL
 #define s3c_irq_wake NULL
 #endif
 
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index 86c68804f09..b7acf1a8ecd 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -28,12 +28,9 @@
 */
 
 unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
 unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
 
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
+int s3c_irq_wake(unsigned int irqno, unsigned int state)
 {
 	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
 
@@ -51,24 +48,6 @@ s3c_irq_wake(unsigned int irqno, unsigned int state)
 	return 0;
 }
 
-int s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
 static struct sleep_save irq_save[] = {
 	SAVE_ITEM(S3C2410_INTMSK),
 	SAVE_ITEM(S3C2410_INTSUBMSK),
-- 
cgit v1.2.3


From 598ee00207a561572e011c49e39144a321ef3979 Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Fri, 12 Dec 2008 00:24:13 +0000
Subject: [ARM] S3C24XX: Fix bug in IRQ_EINT_BIT() calculation

There's a bug in calculation of IRQ_EINT_BIT introduced on the test
branch for pm changes for s3c by Ben Dooks fixed in this patch.

There's also a bit of a mystery about how wake gets to wake EINT
set of interrupts, I added a couple of lines that make it work for
EINT4+ but not sure what's meant to be there for EINT0-3.

Still, this gets GTA02 resume working again.

Signed-off-by: Andy Green <andy@openmoko.com>
[ben-linux@fluff.org: remove irq-pm.c change]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 0cd89b73577..2a2384ffa7b 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -80,7 +80,7 @@
 #define IRQ_EINT22     S3C2410_IRQ(50)
 #define IRQ_EINT23     S3C2410_IRQ(51)
 
-#define IRQ_EINT_BIT(x)	((x) - (IRQ_EINT4 + 4))
+#define IRQ_EINT_BIT(x)	((x) - IRQ_EINT4 + 4)
 #define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
 
 #define IRQ_LCD_FIFO   S3C2410_IRQ(52)
-- 
cgit v1.2.3


From 4e59c25dcbc1f033d043f1009a7f6aaa1f2aef26 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:18 +0000
Subject: [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.

Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-h1940.c  | 2 +-
 arch/arm/mach-s3c2410/mach-qt2410.c | 2 +-
 arch/arm/mach-s3c2412/mach-jive.c   | 2 +-
 arch/arm/mach-s3c2440/mach-rx3715.c | 2 +-
 arch/arm/plat-s3c/include/plat/pm.h | 6 +++---
 arch/arm/plat-s3c/pm.c              | 4 ++--
 arch/arm/plat-s3c24xx/common-smdk.c | 2 +-
 arch/arm/plat-s3c24xx/pm-simtec.c   | 2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 821a1668c3a..7a7c4da4c25 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -203,7 +203,7 @@ static void __init h1940_map_io(void)
 #ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 static void __init h1940_init_irq(void)
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9678a53ceeb..9f1ba9b63f7 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -355,7 +355,7 @@ static void __init qt2410_machine_init(void)
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 MACHINE_START(QT2410, "QT2410")
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index ecddbbb3483..50d8054292c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -630,7 +630,7 @@ static void __init jive_machine_init(void)
 
 	/* initialise the power management now we've setup everything. */
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 
 	s3c_device_nand.dev.platform_data = &jive_nand_info;
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 12d378f84ad..bc8d8d1ebd1 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -203,7 +203,7 @@ static void __init rx3715_init_machine(void)
 #ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
-	s3c2410_pm_init();
+	s3c_pm_init();
 
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 5e27de955da..a6104c8055f 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
 */
 
-/* s3c2410_pm_init
+/* s3c_pm_init
  *
  * called from board at initialisation time to setup the power
  * management
@@ -17,11 +17,11 @@
 
 #ifdef CONFIG_PM
 
-extern __init int s3c2410_pm_init(void);
+extern __init int s3c_pm_init(void);
 
 #else
 
-static inline int s3c2410_pm_init(void)
+static inline int s3c_pm_init(void)
 {
 	return 0;
 }
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 7c736deff8a..e82ec628ced 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -316,14 +316,14 @@ static struct platform_suspend_ops s3c_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-/* s3c2410_pm_init
+/* s3c_pm_init
  *
  * Attach the power management functions. This should be called
  * from the board specific initialisation if the board supports
  * it.
 */
 
-int __init s3c2410_pm_init(void)
+int __init s3c_pm_init(void)
 {
 	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
 
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 3d4837021ac..1a8347cec20 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -201,5 +201,5 @@ void __init smdk_machine_init(void)
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 21dfa74773d..da0d3217d3e 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -61,7 +61,7 @@ static __init int pm_simtec_init(void)
 
 	__raw_writel(gstatus4, S3C2410_GSTATUS4);
 
-	return s3c2410_pm_init();
+	return s3c_pm_init();
 }
 
 arch_initcall(pm_simtec_init);
-- 
cgit v1.2.3


From ef30e14420df546bc6576b00f9caf3379b6699d1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:19 +0000
Subject: [ARM] S3C: Rename sleep.S functions to be non-cpu specific

Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to
s3c_cpu_save to remove the CPU specific naming of these functions
which are now in the generic PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/pm.c          |  2 +-
 arch/arm/mach-s3c2412/mach-jive.c   |  2 +-
 arch/arm/plat-s3c/include/plat/pm.h |  5 +++--
 arch/arm/plat-s3c/pm.c              |  3 ++-
 arch/arm/plat-s3c24xx/sleep.S       | 10 +++++-----
 5 files changed, 12 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 72f96869aa9..87fc481d92d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -41,7 +41,7 @@ static void s3c2410_pm_prepare(void)
 {
 	/* ensure at least GSTATUS3 has the resume address */
 
-	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3);
 
 	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
 	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 50d8054292c..72c266aee14 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -494,7 +494,7 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state)
 	 * correct address to resume from. */
 
 	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index a6104c8055f..f121a5ac742 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -46,9 +46,10 @@ extern unsigned long s3c_pm_flags;
 
 /* from sleep.S */
 
-extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern int  s3c_cpu_save(unsigned long *saveblk);
+extern void s3c_cpu_resume(void);
+
 extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
 
 extern unsigned long s3c_sleep_save_phys;
 
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index e82ec628ced..e320b0ff385 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -280,8 +280,9 @@ static int s3c_pm_enter(suspend_state_t state)
 	 * we resume as it saves its own register state, so use the return
 	 * code to differentiate return from save and return from sleep */
 
-	if (s3c2410_cpu_save(regs_save) == 0) {
+	if (s3c_cpu_save(regs_save) == 0) {
 		flush_cache_all();
+		S3C_PMDBG("preparing to sleep\n");
 		pm_cpu_sleep();
 	}
 
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 7c1955ff317..ecb830be67d 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -41,7 +41,7 @@
 
 	.text
 
-	/* s3c2410_cpu_save
+	/* s3c_cpu_save
 	 *
 	 * save enough of the CPU state to allow us to re-start
 	 * pm.c code. as we store items like the sp/lr, we will
@@ -59,7 +59,7 @@
 	 *	     1 => resumed from sleep
 	*/
 
-ENTRY(s3c2410_cpu_save)
+ENTRY(s3c_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
 
 	@@ store co-processor registers
@@ -99,12 +99,12 @@ s3c_sleep_save_phys:
 
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
-	 * s3c2410_cpu_resume entry.
+	 * s3c_cpu_resume entry.
 	*/
 
 	.word	0x2bedf00d
 
-	/* s3c2410_cpu_resume
+	/* s3c_cpu_resume
 	 *
 	 * resume code entry for bootloader to call
 	 *
@@ -113,7 +113,7 @@ s3c_sleep_save_phys:
 	 * must not write to the code segment (code is read-only)
 	*/
 
-ENTRY(s3c2410_cpu_resume)
+ENTRY(s3c_cpu_resume)
 	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
 	msr	cpsr_c, r0
 
-- 
cgit v1.2.3


From d2b07fe2a3e35d8e58cceb63ab58831d706da939 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:20 +0000
Subject: [ARM] S3C: Update UART save over PM suspend/resume

Change the way the UART state is saved over suspend to allow the s3c64xx
code to modify the settings on resume to avoid any illegal state changes
to the UART clocks. This will also allow us to save the UDIVSLOT register
on newer SoCs.

Move to using a structure for the UART use the extant Kconfig configuration
specifying the number of UARTs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/pm.h      | 19 ++++++++++
 arch/arm/plat-s3c/pm.c                   | 61 ++++++++++++++++++++------------
 arch/arm/plat-s3c24xx/include/plat/map.h |  2 ++
 3 files changed, 60 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index f121a5ac742..c27b8cf5d89 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -71,6 +71,25 @@ struct sleep_save {
 #define SAVE_ITEM(x) \
 	{ .reg = (x) }
 
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+	u32	ulcon;
+	u32	ucon;
+	u32	ufcon;
+	u32	umcon;
+	u32	ubrdiv;
+};
+
 /* helper functions to save/restore lists of registers. */
 
 extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index e320b0ff385..78bf50a1402 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -72,33 +72,50 @@ static inline void s3c_pm_debug_init(void)
 
 #ifdef CONFIG_S3C2410_PM_DEBUG
 
-#define SAVE_UART(va) \
-	SAVE_ITEM((va) + S3C2410_ULCON), \
-	SAVE_ITEM((va) + S3C2410_UCON), \
-	SAVE_ITEM((va) + S3C2410_UFCON), \
-	SAVE_ITEM((va) + S3C2410_UMCON), \
-	SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
-	SAVE_UART(S3C_VA_UART0),
-	SAVE_UART(S3C_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
-	SAVE_UART(S3C_VA_UART2),
-#endif
-};
+struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
+{
+	void __iomem *regs = S3C_VA_UARTx(uart);
+
+	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+	save->ucon = __raw_readl(regs + S3C2410_UCON);
+	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+	save->umcon = __raw_readl(regs + S3C2410_UMCON);
+	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+}
 
-static void s3c_pm_save_uart(void)
+static void s3c_pm_save_uarts(void)
 {
-	s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+	struct pm_uart_save *save = uart_save;
+	unsigned int uart;
+
+	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+		s3c_pm_save_uart(uart, save);
+}
+
+static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
+{
+	void __iomem *regs = S3C_VA_UARTx(uart);
+
+	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
+	__raw_writel(save->ucon,  regs + S3C2410_UCON);
+	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
+	__raw_writel(save->umcon, regs + S3C2410_UMCON);
+	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
 }
 
-static void s3c_pm_restore_uart(void)
+static void s3c_pm_restore_uarts(void)
 {
-	s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+	struct pm_uart_save *save = uart_save;
+	unsigned int uart;
+
+	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+		s3c_pm_restore_uart(uart, save);
 }
 #else
-static void s3c_pm_save_uart(void) { }
-static void s3c_pm_restore_uart(void) { }
+static void s3c_pm_save_uarts(void) { }
+static void s3c_pm_restore_uarts(void) { }
 #endif
 
 /* The IRQ ext-int code goes here, it is too small to currently bother
@@ -250,7 +267,7 @@ static int s3c_pm_enter(suspend_state_t state)
 	/* save all necessary core registers not covered by the drivers */
 
 	s3c_pm_save_gpios();
-	s3c_pm_save_uart();
+	s3c_pm_save_uarts();
 	s3c_pm_save_core();
 
 	/* set the irq configuration for wake */
@@ -293,7 +310,7 @@ static int s3c_pm_enter(suspend_state_t state)
 	/* restore the system state */
 
 	s3c_pm_restore_core();
-	s3c_pm_restore_uart();
+	s3c_pm_restore_uarts();
 	s3c_pm_restore_gpios();
 
 	s3c_pm_debug_init();
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index fef8ea8b8e1..eed8f78e759 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -31,6 +31,8 @@
 #define S3C24XX_SZ_UART	   SZ_1M
 #define S3C_UART_OFFSET	   (0x4000)
 
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
 /* Timers */
 #define S3C24XX_VA_TIMER   S3C_VA_TIMER
 #define S3C2410_PA_TIMER   (0x51000000)
-- 
cgit v1.2.3


From 67c2addcb08df4827fbb7af88b57cce2ba71e34b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:29 +0000
Subject: [ARM] S3C24XX: Add S3C_GPIO_END definition

Add the definition for S3C_GPIO_END to allow the PM code to build.

This means moving the GPIO bank numbers to a separate file to allow
the gpio and regs-gpio to include them. Including regs-gpio.h into
gpio.h causes too many build problems and adding gpio.h would mean
editing a large number of files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h  | 23 +++++++++++++++++++++++
 arch/arm/mach-s3c2410/include/mach/gpio.h      |  3 +++
 arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 11 +----------
 3 files changed, 27 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
new file mode 100644
index 00000000000..ce1ec69806a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO bank numbering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 00476a573bb..51a88cf9526 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -23,3 +23,6 @@
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
 
 #include <asm-generic/gpio.h>
+#include <mach/gpio-nrs.h>
+
+#define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 32107761306..35a03df473f 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -14,16 +14,7 @@
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H
 
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA   (32*0)
-#define S3C2410_GPIO_BANKB   (32*1)
-#define S3C2410_GPIO_BANKC   (32*2)
-#define S3C2410_GPIO_BANKD   (32*3)
-#define S3C2410_GPIO_BANKE   (32*4)
-#define S3C2410_GPIO_BANKF   (32*5)
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
+#include <mach/gpio-nrs.h>
 
 #ifdef CONFIG_CPU_S3C2400
 #define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
-- 
cgit v1.2.3


From 663a83048c602d5176c23489b4e29598d753e42b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:36 +0000
Subject: [ARM] S3C: Avoid checking the task stackpage in pm-check

When doing the CRC check of the memory, avoid checking
the page that our stack is residing in as this changes
during the execution of the suspend and resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/pm-check.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index b221470e3bf..183f1304bf5 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -152,7 +152,7 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
 }
 
 /**
- * s3c_pm_runcheck*() - helper to check a resource on restore.
+ * s3c_pm_runcheck() - helper to check a resource on restore.
  * @res: The resource to check
  * @vak: Pointer to list of CRC32 values to check.
  *
@@ -166,9 +166,12 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
 	void *save_at = phys_to_virt(s3c_sleep_save_phys);
 	unsigned long addr;
 	unsigned long left;
+	void *stkpage;
 	void *ptr;
 	u32 calc;
 
+	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
 	for (addr = res->start; addr < res->end;
 	     addr += CHECK_CHUNKSIZE) {
 		left = res->end - addr;
@@ -178,6 +181,11 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
 
 		ptr = phys_to_virt(addr);
 
+		if (in_region(ptr, left, stkpage, 4096)) {
+			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+			goto skip_check;
+		}
+
 		if (in_region(ptr, left, crcs, crc_size)) {
 			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
 			goto skip_check;
-- 
cgit v1.2.3


From aa8aba6944203a17a7e941b42d8415153c649660 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:34 +0000
Subject: [ARM] S3C: Do not kmalloc/kfree during inner suspend code.

The PM CRC checking code kmallocs an area to save a set of
CRC values during suspend. This triggers a warning due to the
call of a function that might sleep whilst the system is not
in a valid state to do so.

Move the allocation and free to points in the suspend and resume
process where they can call a function that might-sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/pm.h |  2 ++
 arch/arm/plat-s3c/pm-check.c        | 20 ++++++++++++++++----
 arch/arm/plat-s3c/pm.c              | 19 +++++++++++++++----
 3 files changed, 33 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index c27b8cf5d89..5ee26da2702 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -129,10 +129,12 @@ extern void s3c_pm_dbg(const char *msg, ...);
 #ifdef CONFIG_S3C2410_PM_CHECK
 extern void s3c_pm_check_prepare(void);
 extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
 extern void s3c_pm_check_store(void);
 #else
 #define s3c_pm_check_prepare() do { } while(0)
 #define s3c_pm_check_restore() do { } while(0)
+#define s3c_pm_check_cleanup() do { } while(0)
 #define s3c_pm_check_store()   do { } while(0)
 #endif
 
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 183f1304bf5..39f2555564d 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -222,9 +222,21 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
 */
 void s3c_pm_check_restore(void)
 {
-	if (crcs != NULL) {
+	if (crcs != NULL)
 		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
-		kfree(crcs);
-		crcs = NULL;
-	}
 }
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+	kfree(crcs);
+	crcs = NULL;
+}
+
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 78bf50a1402..a0ca18a75b0 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -254,10 +254,6 @@ static int s3c_pm_enter(suspend_state_t state)
 		return -EINVAL;
 	}
 
-	/* prepare check area if configured */
-
-	s3c_pm_check_prepare();
-
 	/* store the physical address of the register recovery block */
 
 	s3c_sleep_save_phys = virt_to_phys(regs_save);
@@ -329,8 +325,23 @@ static int s3c_pm_enter(suspend_state_t state)
 	return 0;
 }
 
+static int s3c_pm_prepare(void)
+{
+	/* prepare check area if configured */
+
+	s3c_pm_check_prepare();
+	return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
 static struct platform_suspend_ops s3c_pm_ops = {
 	.enter		= s3c_pm_enter,
+	.prepare	= s3c_pm_prepare,
+	.finish		= s3c_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
 
-- 
cgit v1.2.3


From 23804614230be43185b7d9b5ef97a8b87375c3cc Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 9 Feb 2009 17:34:05 +0100
Subject: [ARM] pxa/magician: fix htc-egpio resource size

Fixes an off-by-one error.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index af464870c12..7fd31235c26 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -204,7 +204,7 @@ static struct platform_device gpio_keys = {
 static struct resource egpio_resources[] = {
 	[0] = {
 		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20,
+		.end   = PXA_CS3_PHYS + 0x20 - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-- 
cgit v1.2.3


From d62ab6e26dbda4d5e183ccbbce9909c5667b20ef Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 9 Feb 2009 17:34:06 +0100
Subject: [ARM] pxa/magician: select PXA_SSP for touchscreen and sound

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/magician_defconfig | 1 +
 arch/arm/mach-pxa/Kconfig           | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 91bc3974f19..82428c2f234 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -196,6 +196,7 @@ CONFIG_MACH_MAGICIAN=y
 # CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_PXA_EZX is not set
 CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
 CONFIG_PXA_PWM=y
 CONFIG_PXA_HAVE_BOARD_IRQS=y
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 04d1a07ced7..33214c1e060 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -302,6 +302,7 @@ config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
-- 
cgit v1.2.3


From d942d778b1cc9a3b72f4c92ddf1e6312102a4ad4 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 9 Feb 2009 17:34:07 +0100
Subject: [ARM] pxa/magician: register pda_power IRQs as rising/falling edge

so they can be shared with gpio_vbus.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 7fd31235c26..9ca16ec48f6 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -626,13 +626,15 @@ static struct pda_power_pdata power_supply_info = {
 static struct resource power_supply_resources[] = {
 	[0] = {
 		.name  = "ac",
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
 		.start = IRQ_MAGICIAN_VBUS,
 		.end   = IRQ_MAGICIAN_VBUS,
 	},
 	[1] = {
 		.name  = "usb",
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		         IORESOURCE_IRQ_LOWEDGE,
 		.start = IRQ_MAGICIAN_VBUS,
 		.end   = IRQ_MAGICIAN_VBUS,
 	},
-- 
cgit v1.2.3


From 05199ecb7c986a15c1a61a86cb41dffdc05929f0 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 9 Feb 2009 17:34:08 +0100
Subject: [ARM] pxa/magician: default to backlight trigger for keypad
 illumination

Default to the same behaviour as the shipped WinCE system.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 9ca16ec48f6..efb3a92ff83 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -435,7 +435,7 @@ static struct gpio_led gpio_leds[] = {
 	},
 	{
 		.name = "magician::phone_bl",
-		.default_trigger = "none",
+		.default_trigger = "backlight",
 		.gpio = GPIO103_MAGICIAN_LED_KP,
 	},
 };
-- 
cgit v1.2.3


From 5b079b5ab4cfc6d23312b3bb0203f527bb1f79d0 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Mon, 9 Feb 2009 17:34:09 +0100
Subject: [ARM] pxa/magician: remove unused forward declaration of pasic3

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/magician.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index efb3a92ff83..712030a987b 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -483,8 +483,6 @@ static struct pasic3_led pasic3_leds[] = {
 	},
 };
 
-static struct platform_device pasic3;
-
 static struct pasic3_leds_machinfo pasic3_leds_info = {
 	.num_leds   = ARRAY_SIZE(pasic3_leds),
 	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
-- 
cgit v1.2.3


From 51c62982a33d9086fd8876293411d28a5f97247a Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 2 Jan 2009 23:17:22 +0800
Subject: [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:

  <mach/pxa25x.h>  - for pxa25x based platforms
  <mach/pxa27x.h>  - for pxa27x based platforms
  <mach/pxa300.h>  - for pxa300 based platforms
  <mach/pxa320.h>  - for pxa320 based platforms
  <mach/pxa930.h>  - for pxa930 based platforms

NOTE:

1. one header one board file, they are not compatible (i.e. they have
   conflicting definitions which won't compile if included together).

2. Unless strictly necessary, the following header files are considered
   to be SoC files use _only_, and is not recommended to be included in
   board code:

    <mach/hardware.h>
    <mach/pxa-regs.h>
    <mach/pxa2xx-regs.h>
    <mach/pxa3xx-regs.h>
    <mach/mfp.h>
    <mach/mfp-pxa2xx.h>
    <mach/mfp-pxa25x.h>
    <mach/mfp-pxa27x.h>
    <mach/mfp-pxa3xx.h>
    <mach/mfp-pxa300.h>
    <mach/mfp-pxa320.h>
    <mach/mfp-pxa930.h>

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/am200epd.c                 |  2 +-
 arch/arm/mach-pxa/cm-x255.c                  |  4 +---
 arch/arm/mach-pxa/cm-x270.c                  |  2 +-
 arch/arm/mach-pxa/cm-x2xx.c                  |  2 --
 arch/arm/mach-pxa/cm-x300.c                  |  4 +---
 arch/arm/mach-pxa/colibri.c                  |  4 ++--
 arch/arm/mach-pxa/corgi.c                    |  4 +---
 arch/arm/mach-pxa/corgi_pm.c                 |  1 -
 arch/arm/mach-pxa/cpufreq-pxa2xx.c           |  2 --
 arch/arm/mach-pxa/cpufreq-pxa3xx.c           |  2 --
 arch/arm/mach-pxa/devices.c                  |  1 -
 arch/arm/mach-pxa/e330.c                     |  4 +---
 arch/arm/mach-pxa/e350.c                     |  4 +---
 arch/arm/mach-pxa/e400.c                     |  4 +---
 arch/arm/mach-pxa/e740.c                     |  4 +---
 arch/arm/mach-pxa/e750.c                     |  4 +---
 arch/arm/mach-pxa/e800.c                     |  4 +---
 arch/arm/mach-pxa/em-x270.c                  |  3 +--
 arch/arm/mach-pxa/eseries.c                  |  3 +--
 arch/arm/mach-pxa/ezx.c                      | 10 ++++------
 arch/arm/mach-pxa/gumstix.c                  |  6 ++----
 arch/arm/mach-pxa/h5000.c                    |  7 ++++---
 arch/arm/mach-pxa/idp.c                      |  3 +--
 arch/arm/mach-pxa/imote2.c                   |  5 +----
 arch/arm/mach-pxa/include/mach/pxa25x.h      |  8 ++++++++
 arch/arm/mach-pxa/include/mach/pxa27x.h      | 19 +++++++++++++++++++
 arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 20 ++------------------
 arch/arm/mach-pxa/include/mach/pxa300.h      |  8 ++++++++
 arch/arm/mach-pxa/include/mach/pxa320.h      |  9 +++++++++
 arch/arm/mach-pxa/include/mach/pxa3xx-regs.h |  2 ++
 arch/arm/mach-pxa/include/mach/pxa930.h      |  8 ++++++++
 arch/arm/mach-pxa/include/mach/regs-ssp.h    |  1 -
 arch/arm/mach-pxa/leds-idp.c                 |  2 +-
 arch/arm/mach-pxa/leds-lubbock.c             |  2 +-
 arch/arm/mach-pxa/leds-mainstone.c           |  2 +-
 arch/arm/mach-pxa/littleton.c                |  3 +--
 arch/arm/mach-pxa/lpd270.c                   |  4 +---
 arch/arm/mach-pxa/lubbock.c                  |  4 +---
 arch/arm/mach-pxa/magician.c                 |  5 ++---
 arch/arm/mach-pxa/mainstone.c                |  4 +---
 arch/arm/mach-pxa/mioa701.c                  |  4 ++--
 arch/arm/mach-pxa/mp900.c                    |  4 ++--
 arch/arm/mach-pxa/palmld.c                   |  3 +--
 arch/arm/mach-pxa/palmt5.c                   |  3 +--
 arch/arm/mach-pxa/palmtx.c                   |  3 +--
 arch/arm/mach-pxa/palmz72.c                  |  4 +---
 arch/arm/mach-pxa/pcm027.c                   |  5 +----
 arch/arm/mach-pxa/pcm990-baseboard.c         |  3 +--
 arch/arm/mach-pxa/poodle.c                   |  4 +---
 arch/arm/mach-pxa/pxa25x.c                   |  4 +---
 arch/arm/mach-pxa/pxa27x.c                   |  4 +---
 arch/arm/mach-pxa/pxa2xx.c                   |  1 -
 arch/arm/mach-pxa/pxa300.c                   |  4 +---
 arch/arm/mach-pxa/pxa320.c                   |  5 +----
 arch/arm/mach-pxa/pxa930.c                   |  3 +--
 arch/arm/mach-pxa/saar.c                     |  6 ++----
 arch/arm/mach-pxa/spitz.c                    |  4 +---
 arch/arm/mach-pxa/tavorevb.c                 |  5 ++---
 arch/arm/mach-pxa/tosa.c                     |  4 ++--
 arch/arm/mach-pxa/trizeps4.c                 |  5 +----
 arch/arm/mach-pxa/viper.c                    |  5 +----
 arch/arm/mach-pxa/zylonite_pxa300.c          |  4 ++--
 arch/arm/mach-pxa/zylonite_pxa320.c          |  2 +-
 63 files changed, 120 insertions(+), 159 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa25x.h
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa27x.h
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa300.h
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa320.h
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa930.h

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 77ee80e5e47..3499fada73a 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
+#include <mach/pxa25x.h>
 #include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
 #include <mach/pxafb.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 83a4cdf0817..253fd76142d 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -22,10 +22,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/bitfield.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index df83b97f303..34576ba5f5f 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -17,7 +17,7 @@
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d99fd9e4d88..87e6877c3af 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,8 +22,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index ff0c577cd1a..6bdfcd0f5d0 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -28,9 +28,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mfp-pxa300.h>
-
-#include <mach/hardware.h>
+#include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index e8473624427..26493ae2889 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -28,8 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
 #include <mach/colibri.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a8d91b6c136..3b89e5010fb 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -41,9 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e3525903281..7f04b3a761d 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -24,7 +24,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/corgi.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 771dd4eac93..083a1d851d4 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -37,8 +37,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 968c8309ec3..67f34a8d8e6 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -15,8 +15,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index e16f8e3d58d..d245e59c51b 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,7 +4,6 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 1bd7f740427..74d3f8987c5 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -20,9 +20,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index edcd9d5ce54..08003627213 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -21,9 +21,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index 77bb8e2c48c..ed9c0c3f64a 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -22,9 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00f4f0..e0c3aaf1ecb 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -24,9 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8edb97..84b050f1a99 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -23,9 +23,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index cc9b1293e86..f8924f6ca54 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -23,9 +23,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9f15a7c9cc5..920dfb8d36d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -33,8 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index dfce7d5b659..c60dadf847a 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,8 +20,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index df5f822f3b6..92ba16e1b6f 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -19,18 +19,16 @@
 #include <linux/input.h>
 
 #include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
 #include "devices.h"
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9cb4a074d9f..ca9912ea78d 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -38,14 +38,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+
+#include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/gumstix.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-
 #include "generic.h"
 
 static struct resource flash_resource = {
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index da6e4422c0f..6a197fb5c09 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -24,14 +24,15 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+
+#include <mach/pxa25x.h>
 #include <mach/h5000.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
 #include <mach/udc.h>
+
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 013b15baa03..b6243b59d9b 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -31,8 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/idp.h>
 #include <mach/pxafb.h>
 #include <mach/bitfield.h>
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 364c5e27133..2121309b247 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -28,11 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <mach/pxa27x.h>
 #include <mach/i2c.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/regs-ssp.h>
 #include <mach/udc.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h
new file mode 100644
index 00000000000..508c3ba1f4d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA25x_H
+#define __MACH_PXA25x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
new file mode 100644
index 00000000000..6876e16c297
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -0,0 +1,19 @@
+#ifndef __MACH_PXA27x_H
+#define __MACH_PXA27x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 77102d695cc..0b4ffd05a39 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -14,6 +14,8 @@
 #ifndef __PXA2XX_REGS_H
 #define __PXA2XX_REGS_H
 
+#include <mach/pxa-regs.h>
+
 /*
  * Memory controller
  */
@@ -69,24 +71,6 @@
 #define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
 #define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
 
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
-#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
-#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
-#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
-#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
-
-#endif
-
-
 /*
  * Power Manager
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h
new file mode 100644
index 00000000000..2f33076c9e4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa300.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA300_H
+#define __MACH_PXA300_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h
new file mode 100644
index 00000000000..cab78e90327
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa320.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_PXA320_H
+#define __MACH_PXA320_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#endif /* __MACH_PXA320_H */
+
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index bcf3fb2c4b3..15b3b0be7f5 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_PXA3XX_REGS_H
 #define __ASM_ARCH_PXA3XX_REGS_H
 
+#include <mach/hardware.h>
+
 /*
  * Oscillator Configuration Register (OSCC)
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h
new file mode 100644
index 00000000000..d45f76a9b54
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa930.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA930_H
+#define __MACH_PXA930_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index cf31986f6f0..8152be68388 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -37,7 +37,6 @@
 #if defined(CONFIG_PXA25x)
 #define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-
 #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 18b20d46941..8b9c17142d5 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -18,7 +18,7 @@
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
 #include <mach/idp.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index 1a258029c33..e26d5efe196 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -16,7 +16,7 @@
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
 #include <mach/lubbock.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 95e06b84963..db4af5eee8b 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -16,7 +16,7 @@
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/mainstone.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 31da7f3c06f..e13f6a81c22 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -39,8 +39,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index de3f67daaac..5ca9c5c4807 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,9 +38,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index bff704354c1..e0c264a1f43 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,9 +41,7 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/lubbock.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 712030a987b..d46b36746be 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -30,10 +30,9 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
 #include <mach/magician.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5f224968043..673f838f8f0 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -41,9 +41,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2b427e015b6..dbda65f0e04 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -39,10 +39,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxafb.h>
-#include <mach/pxa2xx-regs.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 8a73814126b..a65713ce019 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -19,10 +19,10 @@
 #include <linux/types.h>
 #include <linux/usb/isp116x.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+
+#include <mach/pxa25x.h>
 #include "generic.h"
 
 static void isp116x_pfm_delay(struct device *dev, int delay)
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 55a2c40b6f2..8587477a9bb 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -29,12 +29,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmld.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 51b4a602551..9521c7b3349 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -31,12 +31,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmt5.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index a9d94f5dbec..b490c092461 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -32,12 +32,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmtx.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 2f730da3bba..b88eb4dd2c8 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,13 +33,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/palmz72.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 36135a02fdc..6abfa2979c6 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,10 +29,7 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pcm027.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 34841c72815..f46698e20c1 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -31,13 +31,12 @@
 #include <mach/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/audio.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pcm990_baseboard.h>
 #include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f9093beba75..572ddec2b3e 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -36,9 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/i2c.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6c57522e246..823cd891def 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,9 +25,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 411bec54fdc..0807794442e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,9 +21,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
 #include <mach/pm.h>
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 73d04d81c75..2f3394f8591 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -16,7 +16,6 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
 #include <mach/mfp-pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 83fb609b6eb..37bb12d13ca 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,9 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 36f066196fa..e708f4e0eca 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,10 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 13e6bfdfff6..f15dfa55f27 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,8 +16,7 @@
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/hardware.h>
-#include <mach/mfp-pxa930.h>
+#include <mach/pxa930.h>
 
 static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 5d02a732558..ff823999143 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -25,11 +25,9 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
 #include <mach/i2c.h>
-#include <mach/regs-lcd.h>
 #include <mach/pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 6d447c9ce8a..f697c492b2a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -44,9 +44,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
 #include <mach/i2c.h>
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 58ef08a5224..b75353a2ec7 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -22,9 +22,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
 #include <mach/pxafb.h>
 #include <mach/pxa27x_keypad.h>
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 3332e5d0356..66b13802c99 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -36,8 +36,8 @@
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+
+#include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/irda.h>
 #include <mach/i2c.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index a72e3add743..f79c9cb70ae 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -39,10 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 4b3120dbc04..03fa5dfa990 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -42,12 +42,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/bitfield.h>
+#include <mach/pxa25x.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
 #include <mach/i2c.h>
 #include <mach/viper.h>
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 46538885a58..c1f73205d07 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,9 +18,9 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
 
-#include <asm/gpio.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
 #include <mach/i2c.h>
 #include <mach/zylonite.h>
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 28e4e623780..4e1c488c690 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
 #include <mach/zylonite.h>
 
 #include "generic.h"
-- 
cgit v1.2.3


From fef1f99a0c2928893c074bf3eff27efd36a4532a Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 2 Jan 2009 16:26:33 +0800
Subject: [ARM] pxa: allow DMA controller IRQ being specified

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/dma.c              | 4 ++--
 arch/arm/mach-pxa/include/mach/dma.h | 2 +-
 arch/arm/mach-pxa/pxa25x.c           | 2 +-
 arch/arm/mach-pxa/pxa27x.c           | 2 +-
 arch/arm/mach-pxa/pxa3xx.c           | 2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 7de17fc5d54..4613bf1fe43 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -113,7 +113,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int __init pxa_init_dma(int num_ch)
+int __init pxa_init_dma(int irq, int num_ch)
 {
 	int i, ret;
 
@@ -131,7 +131,7 @@ int __init pxa_init_dma(int num_ch)
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
 	}
 
-	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
 	if (ret) {
 		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
 		kfree(dma_channels);
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 7804637a6df..77607fe4bd6 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -34,7 +34,7 @@ typedef enum {
  * DMA registration
  */
 
-int __init pxa_init_dma(int num_ch);
+int __init pxa_init_dma(int irq, int num_ch);
 
 int pxa_request_dma (char *name,
 			 pxa_dma_prio prio,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 823cd891def..2332e2dc350 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -353,7 +353,7 @@ static int __init pxa25x_init(void)
 
 		clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
 
-		if ((ret = pxa_init_dma(16)))
+		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
 			return ret;
 
 		pxa25x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0807794442e..c8b469bbcf3 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -379,7 +379,7 @@ static int __init pxa27x_init(void)
 
 		clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
 
-		if ((ret = pxa_init_dma(32)))
+		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
 		pxa27x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 490893824e7..e626b79cbee 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -594,7 +594,7 @@ static int __init pxa3xx_init(void)
 
 		clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
 
-		if ((ret = pxa_init_dma(32)))
+		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
 
 		pxa3xx_init_pm();
-- 
cgit v1.2.3


From 7ebc8d56f407184a457dd5fc739cf39e423a25aa Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 2 Jan 2009 19:38:42 +0800
Subject: [ARM] pxa: move DMA registers definitions into <mach/dma.h>

1. Driver code where pxa_request_dma() is called will most likely
   reference DMA registers as well,  and it is really unnecessary
   to include pxa-regs.h just for this. Move the definitions into
   <mach/dma.h> and make relevant drivers include it instead of
   <mach/pxa-regs.h>.

2. Introduce DMAC_REGS_VIRT as the virtual address base for these
   DMA registers. This allows later processors to re-use the same
   IP while registers may start at different I/O address.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/dma.c                   |  2 --
 arch/arm/mach-pxa/include/mach/dma.h      | 56 +++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/pxa-regs.h | 59 -------------------------------
 3 files changed, 56 insertions(+), 61 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 4613bf1fe43..01217e01f7d 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -23,8 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/dma.h>
 
-#include <mach/pxa-regs.h>
-
 struct dma_channel {
 	char *name;
 	pxa_dma_prio prio;
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 77607fe4bd6..b0812f59d3f 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -12,6 +12,62 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
+#include <mach/hardware.h>
+
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT	io_p2v(0x40000000)
+#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n)		DMAC_REG((n) << 2)
+#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
+#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
+#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+				 (((n) & 0x3f) << 2))
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+#endif
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
 /*
  * Descriptor structure for PXA's DMA engine
  * Note: this structure must always be aligned to a 16-byte boundary.
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 31d615aa772..7d8db197615 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -65,65 +65,6 @@
 #define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
 #define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
 
-
-
-/*
- * DMA Controller
- */
-#define DCSR(x)		__REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-#endif
-
-#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
-#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
-
-#define DRCMR(n)	(*(((n) < 64) ? \
-			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
-			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR(x)	__REG2(0x40000200, (x) << 4)
-#define DSADR(x)	__REG2(0x40000204, (x) << 4)
-#define DTADR(x)	__REG2(0x40000208, (x) << 4)
-#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
 /*
  * Real Time Clock
  */
-- 
cgit v1.2.3


From a58fbcd8ad17ddaa0c7aadbbbd20de4ebc807fa4 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 6 Jan 2009 17:37:37 +0800
Subject: [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c

This is part of the work making gpio.c generic enough, the changes
include:

1. move IRQ handling of GPIO 0 and 1 outside (and back into irq.c)

2. pxa_init_gpio() accepts a range for muxed GPIO IRQs, and an IRQ
   number for the muxed GPIOs

3. __gpio_is_occupied() and __gpio_is_inverted() are made inline,
   and are moved into <mach/gpio.h> instead of generic gpio.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/generic.h           |   6 +-
 arch/arm/mach-pxa/gpio.c              | 113 ++++++++--------------------------
 arch/arm/mach-pxa/include/mach/gpio.h |  38 +++++++++++-
 arch/arm/mach-pxa/irq.c               |  68 ++++++++++++++++++++
 arch/arm/mach-pxa/pxa25x.c            |   5 +-
 arch/arm/mach-pxa/pxa27x.c            |   3 +-
 arch/arm/mach-pxa/pxa3xx.c            |   3 +-
 7 files changed, 138 insertions(+), 98 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index dc876a8e666..bc12c9421ce 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -9,13 +9,11 @@
  * published by the Free Software Foundation.
  */
 
-typedef int (*set_wake_t)(unsigned int, unsigned int);
-
 struct sys_timer;
 
 extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr, set_wake_t fn);
-extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn);
+extern void __init pxa_init_irq(int irq_nr,
+				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 5fec1e479cb..19824601902 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -45,18 +45,6 @@ struct pxa_gpio_chip {
 
 int pxa_last_gpio;
 
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static int __gpio_is_inverted(unsigned gpio)
-{
-	return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-#define __gpio_is_inverted(gpio)	(0)
-#endif
-
 /*
  * Configure pins for GPIO or other functions
  */
@@ -185,6 +173,20 @@ static struct pxa_gpio_chip pxa_gpio_chip[] = {
 #endif
 };
 
+static void __init pxa_init_gpio_chip(int gpio_nr)
+{
+	int i, gpio;
+
+	/* add a GPIO chip for each register bank.
+	 * the last PXA25x register only contains 21 GPIOs
+	 */
+	for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
+		if (gpio + 32 > gpio_nr)
+			pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
+		gpiochip_add(&pxa_gpio_chip[i].chip);
+	}
+}
+
 /*
  * PXA GPIO edge detection for IRQs:
  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
@@ -195,27 +197,6 @@ static unsigned long GPIO_IRQ_rising_edge[4];
 static unsigned long GPIO_IRQ_falling_edge[4];
 static unsigned long GPIO_IRQ_mask[4];
 
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static int __gpio_is_occupied(unsigned gpio)
-{
-	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
-		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
-		int dir = GPDR(gpio) & GPIO_bit(gpio);
-
-		if (__gpio_is_inverted(gpio))
-			return af != 1 || dir == 0;
-		else
-			return af != 0 || dir != 0;
-	}
-
-	return 0;
-}
-
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int gpio, idx;
@@ -261,33 +242,6 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	return 0;
 }
 
-/*
- * GPIO IRQs must be acknowledged.  This is for GPIO 0 and 1.
- */
-
-static void pxa_ack_low_gpio(unsigned int irq)
-{
-	GEDR0 = (1 << (irq - IRQ_GPIO0));
-}
-
-static void pxa_mask_low_gpio(unsigned int irq)
-{
-	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
-}
-
-static void pxa_unmask_low_gpio(unsigned int irq)
-{
-	ICMR |= 1 << (irq - PXA_IRQ(0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
-	.name		= "GPIO-l",
-	.ack		= pxa_ack_low_gpio,
-	.mask		= pxa_mask_low_gpio,
-	.unmask		= pxa_unmask_low_gpio,
-	.set_type	= pxa_gpio_irq_type,
-};
-
 /*
  * Demux handler for GPIO>=2 edge detect interrupts
  */
@@ -352,48 +306,31 @@ static struct irq_chip pxa_muxed_gpio_chip = {
 	.set_type	= pxa_gpio_irq_type,
 };
 
-void __init pxa_init_gpio(int gpio_nr, set_wake_t fn)
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
 {
-	int irq, i, gpio;
+	int irq, i;
 
-	pxa_last_gpio = gpio_nr - 1;
+	pxa_last_gpio = end;
 
 	/* clear all GPIO edge detects */
-	for (i = 0; i < gpio_nr; i += 32) {
-		GFER(i) = 0;
-		GRER(i) = 0;
-		GEDR(i) = GEDR(i);
+	for (i = start; i <= end; i += 32) {
+		GFER(i) &= ~GPIO_IRQ_mask[i];
+		GRER(i) &= ~GPIO_IRQ_mask[i];
+		GEDR(i) = GPIO_IRQ_mask[i];
 	}
 
-	/* GPIO 0 and 1 must have their mask bit always set */
-	GPIO_IRQ_mask[0] = 3;
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
-		set_irq_chip(irq, &pxa_low_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
+	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
 		set_irq_chip(irq, &pxa_muxed_gpio_chip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
 	/* Install handler for GPIO>=2 edge detect interrupts */
-	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-
-	pxa_low_gpio_chip.set_wake = fn;
+	set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
 	pxa_muxed_gpio_chip.set_wake = fn;
 
-	/* add a GPIO chip for each register bank.
-	 * the last PXA25x register only contains 21 GPIOs
-	 */
-	for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
-		if (gpio + 32 > gpio_nr)
-			pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
-		gpiochip_add(&pxa_gpio_chip[i].chip);
-	}
+	/* Initialize GPIO chips */
+	pxa_init_gpio_chip(end + 1);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 2c538d8c362..c7ac3d62d34 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -56,10 +56,44 @@ static inline void gpio_set_value(unsigned gpio, int value)
 	}
 }
 
-#define gpio_cansleep __gpio_cansleep
-
+#define gpio_cansleep		__gpio_cansleep
 #define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
 #define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
 
 
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+	return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+		int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+		if (__gpio_is_inverted(gpio))
+			return af != 1 || dir == 0;
+		else
+			return af != 0 || dir != 0;
+	} else
+		return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
 #endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fa69c3a6a38..d3d40a31f9d 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -21,6 +21,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/pxa-regs.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -51,6 +52,72 @@ static struct irq_chip pxa_internal_irq_chip = {
 	.unmask		= pxa_unmask_irq,
 };
 
+/*
+ * GPIO IRQs for GPIO 0 and 1
+ */
+static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type)
+{
+	int gpio = irq - IRQ_GPIO0;
+
+	if (__gpio_is_occupied(gpio)) {
+		pr_err("%s failed: GPIO is configured\n", __func__);
+		return -EINVAL;
+	}
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		GRER0 |= GPIO_bit(gpio);
+	else
+		GRER0 &= ~GPIO_bit(gpio);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		GFER0 |= GPIO_bit(gpio);
+	else
+		GFER0 &= ~GPIO_bit(gpio);
+
+	return 0;
+}
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+	GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static void pxa_mask_low_gpio(unsigned int irq)
+{
+	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+}
+
+static void pxa_unmask_low_gpio(unsigned int irq)
+{
+	ICMR |= 1 << (irq - PXA_IRQ(0));
+}
+
+static struct irq_chip pxa_low_gpio_chip = {
+	.name		= "GPIO-l",
+	.ack		= pxa_ack_low_gpio,
+	.mask		= pxa_mask_low_gpio,
+	.unmask		= pxa_unmask_low_gpio,
+	.set_type	= pxa_set_low_gpio_type,
+};
+
+static void __init pxa_init_low_gpio_irq(set_wake_t fn)
+{
+	int irq;
+
+	/* clear edge detection on GPIO 0 and 1 */
+	GFER0 &= ~0x3;
+	GRER0 &= ~0x3;
+	GEDR0 = 0x3;
+
+	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+		set_irq_chip(irq, &pxa_low_gpio_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	pxa_low_gpio_chip.set_wake = fn;
+}
+
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
 	int irq;
@@ -72,6 +139,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 	}
 
 	pxa_internal_irq_chip.set_wake = fn;
+	pxa_init_low_gpio_irq(fn);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 2332e2dc350..77c2693cfee 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,6 +25,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/pm.h>
@@ -308,14 +309,14 @@ set_pwer:
 void __init pxa25x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
-	pxa_init_gpio(85, pxa25x_set_wake);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
 }
 
 #ifdef CONFIG_CPU_PXA26x
 void __init pxa26x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
-	pxa_init_gpio(90, pxa25x_set_wake);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index c8b469bbcf3..a425ec71e65 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,6 +21,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <mach/pxa27x.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
@@ -330,7 +331,7 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
 void __init pxa27x_init_irq(void)
 {
 	pxa_init_irq(34, pxa27x_set_wake);
-	pxa_init_gpio(121, pxa27x_set_wake);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
 }
 
 /*
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index e626b79cbee..b02d4544dc9 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
@@ -538,7 +539,7 @@ void __init pxa3xx_init_irq(void)
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
 	pxa_init_irq(56, pxa3xx_set_wake);
-	pxa_init_gpio(128, NULL);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
 /*
-- 
cgit v1.2.3


From 0d9f768fce67a53b9c2296789129d4dfb3f4996b Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 6 Jan 2009 18:06:25 +0800
Subject: [ARM] pxa: move pxa_gpio_mode() outside of generic gpio.c

Looks like we have to live with pxa_gpio_mode() for a while, giving
its presence is actually making gpio.c not generic enough, let's
move it temporarily outside before it can be fully purged.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/generic.c | 31 +++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/gpio.c    | 31 -------------------------------
 2 files changed, 31 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 0ccc91c92c4..dc870dd9369 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,6 +28,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/reset.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -127,3 +128,33 @@ void __init pxa_map_io(void)
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
+
+/*
+ * Configure pins for GPIO or other functions
+ */
+int pxa_gpio_mode(int gpio_mode)
+{
+	unsigned long flags;
+	int gpio = gpio_mode & GPIO_MD_MASK_NR;
+	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+	int gafr;
+
+	if (gpio > pxa_last_gpio)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	if (gpio_mode & GPIO_DFLT_LOW)
+		GPCR(gpio) = GPIO_bit(gpio);
+	else if (gpio_mode & GPIO_DFLT_HIGH)
+		GPSR(gpio) = GPIO_bit(gpio);
+	if (gpio_mode & GPIO_MD_MASK_DIR)
+		GPDR(gpio) |= GPIO_bit(gpio);
+	else
+		GPDR(gpio) &= ~GPIO_bit(gpio);
+	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(pxa_gpio_mode);
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 19824601902..c9d9c702c7d 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -21,7 +21,6 @@
 #include <asm/gpio.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -45,36 +44,6 @@ struct pxa_gpio_chip {
 
 int pxa_last_gpio;
 
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
-{
-	unsigned long flags;
-	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-	int gafr;
-
-	if (gpio > pxa_last_gpio)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	if (gpio_mode & GPIO_DFLT_LOW)
-		GPCR(gpio) = GPIO_bit(gpio);
-	else if (gpio_mode & GPIO_DFLT_HIGH)
-		GPSR(gpio) = GPIO_bit(gpio);
-	if (gpio_mode & GPIO_MD_MASK_DIR)
-		GPDR(gpio) |= GPIO_bit(gpio);
-	else
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-	local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(pxa_gpio_mode);
-
 static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	unsigned long        flags;
-- 
cgit v1.2.3


From da065a0b3611751feefeb0f0e277cd5830056dad Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 6 Jan 2009 18:29:01 +0800
Subject: [ARM] pxa: move GPIO register definitions into <mach/gpio.h>

This makes gpio.c fully independent of pxa-regs.h (except for the
virtual address of the registers).

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/generic.c                  |  2 +-
 arch/arm/mach-pxa/gpio.c                     | 14 ++----
 arch/arm/mach-pxa/include/mach/gpio.h        | 74 ++++++++++++++++++++++++++--
 arch/arm/mach-pxa/include/mach/pxa-regs.h    | 72 ---------------------------
 arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h |  2 +
 arch/arm/mach-pxa/lpd270.c                   |  1 +
 arch/arm/mach-pxa/lubbock.c                  |  1 +
 arch/arm/mach-pxa/mainstone.c                |  1 +
 arch/arm/mach-pxa/mfp-pxa2xx.c               |  3 +-
 9 files changed, 83 insertions(+), 87 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index dc870dd9369..3126a35aa00 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -26,8 +26,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/reset.h>
+#include <mach/gpio.h>
 #include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index c9d9c702c7d..9a33eb07fe0 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,16 +18,12 @@
 #include <linux/sysdev.h>
 #include <linux/io.h>
 
-#include <asm/gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
 
-#include "generic.h"
-
-#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
+#define GPIO0_BASE	(GPIO_REGS_VIRT + 0x0000)
+#define GPIO1_BASE	(GPIO_REGS_VIRT + 0x0004)
+#define GPIO2_BASE	(GPIO_REGS_VIRT + 0x0008)
+#define GPIO3_BASE	(GPIO_REGS_VIRT + 0x0100)
 
 #define GPLR_OFFSET	0x00
 #define GPDR_OFFSET	0x0C
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c7ac3d62d34..be4900ea32d 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,12 +24,80 @@
 #ifndef __ASM_ARCH_PXA_GPIO_H
 #define __ASM_ARCH_PXA_GPIO_H
 
-#include <mach/pxa-regs.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
-
 #include <asm-generic/gpio.h>
 
+#define GPIO_REGS_VIRT	io_p2v(0x40E00000)
+
+#define BANK_OFF(n)	(((n) > 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0		GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1		GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2		GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3		GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0		GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1		GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2		GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3		GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0		GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1		GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2		GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3		GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0		GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1		GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2		GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3		GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0		GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1		GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2		GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3		GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0		GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1		GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2		GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3		GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0		GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1		GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2		GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3		GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L		GPIO_REG(0x0054)
+#define GAFR0_U		GPIO_REG(0x0058)
+#define GAFR1_L		GPIO_REG(0x005C)
+#define GAFR1_U		GPIO_REG(0x0060)
+#define GAFR2_L		GPIO_REG(0x0064)
+#define GAFR2_U		GPIO_REG(0x0068)
+#define GAFR3_L		GPIO_REG(0x006C)
+#define GAFR3_U		GPIO_REG(0x0070)
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#define GPLR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
 
 /* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
  * Those cases currently cause holes in the GPIO number space.
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 7d8db197615..f06122262fe 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -129,76 +129,4 @@
 #define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
 #define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 
-/*
- * General Purpose I/O
- */
-
-#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index d83393e2527..1209c44aa6f 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -3,6 +3,8 @@
 
 #warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
 
+#include <mach/gpio.h>
+
 /* GPIO alternate function assignments */
 
 #define GPIO1_RST		1	/* reset */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 5ca9c5c4807..d64395f26a3 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -39,6 +39,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
+#include <mach/gpio.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e0c264a1f43..03a43ea148a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -42,6 +42,7 @@
 #include <asm/hardware/sa1111.h>
 
 #include <mach/pxa25x.h>
+#include <mach/gpio.h>
 #include <mach/audio.h>
 #include <mach/lubbock.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 673f838f8f0..a6c8429e975 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -42,6 +42,7 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
+#include <mach/gpio.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 33626de8cbf..9d23b731d39 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,8 +18,7 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa2xx.h>
 
-- 
cgit v1.2.3


From 3b8e285c21d12082a85a142ef73a1648d41cae46 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 7 Jan 2009 11:30:49 +0800
Subject: [ARM] pxa: move declaration of 'pxa_last_gpio' into <mach/gpio.h>

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/generic.h           | 1 -
 arch/arm/mach-pxa/gpio.c              | 4 ++--
 arch/arm/mach-pxa/include/mach/gpio.h | 5 ++++-
 3 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index bc12c9421ce..3465268ca71 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -20,7 +20,6 @@ extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
-extern int pxa_last_gpio;
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 9a33eb07fe0..41935590e99 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -20,6 +20,8 @@
 
 #include <mach/gpio.h>
 
+int pxa_last_gpio;
+
 #define GPIO0_BASE	(GPIO_REGS_VIRT + 0x0000)
 #define GPIO1_BASE	(GPIO_REGS_VIRT + 0x0004)
 #define GPIO2_BASE	(GPIO_REGS_VIRT + 0x0008)
@@ -38,8 +40,6 @@ struct pxa_gpio_chip {
 	void __iomem     *regbase;
 };
 
-int pxa_last_gpio;
-
 static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	unsigned long        flags;
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index be4900ea32d..4049b234eda 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -100,8 +100,11 @@
 
 
 /* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
  */
+extern int pxa_last_gpio;
+
 #define NR_BUILTIN_GPIO 128
 
 static inline int gpio_get_value(unsigned gpio)
-- 
cgit v1.2.3


From 0807da5938b2d64fef7f1109fb4014de6392cbf7 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 7 Jan 2009 18:01:51 +0800
Subject: [ARM] pxa: access GPIO registers by chip so to make it further
 generic

Let's handle GPIOs by banks, each bank covers up to 32 GPIOs with one set
of registers, and each set of registers start from different offsets.

           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
 BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
 BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
 BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050

 BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
 BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
 BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150

 NOTE:
   BANK 3 is only available on PXA27x and later processors.
   BANK 4 and 5 are only available on PXA935

1. introduce GPIO_BANK(n) for the offset base of each bank

2. 'struct pxa_gpio_chip' is expanded to include IRQ edge and mask
   setings, and saved register values as well, and is dynamically
   allocated due to possible bank number ranging from 3 to 6

3. all accesses to GPIO registers are made through 'regbase' within
   'pxa_gpio_chip', and register offset

4. introduce several inline functions to simplify the code a bit

5. change IRQ demux handler to base on gpio chips

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/gpio.c              | 346 +++++++++++++++++-----------------
 arch/arm/mach-pxa/include/mach/gpio.h |   1 +
 arch/arm/mach-pxa/mfp-pxa2xx.c        |   2 -
 3 files changed, 179 insertions(+), 170 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 41935590e99..7c2267036bf 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -13,19 +13,34 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/irq.h>
-#include <linux/sysdev.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/bootmem.h>
 
 #include <mach/gpio.h>
 
 int pxa_last_gpio;
 
-#define GPIO0_BASE	(GPIO_REGS_VIRT + 0x0000)
-#define GPIO1_BASE	(GPIO_REGS_VIRT + 0x0004)
-#define GPIO2_BASE	(GPIO_REGS_VIRT + 0x0008)
-#define GPIO3_BASE	(GPIO_REGS_VIRT + 0x0100)
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
+ * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
+ * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
+ * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
+ *
+ * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
+ * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
+ * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
+ *
+ * NOTE:
+ *   BANK 3 is only available on PXA27x and later processors.
+ *   BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
 
 #define GPLR_OFFSET	0x00
 #define GPDR_OFFSET	0x0C
@@ -37,144 +52,138 @@ int pxa_last_gpio;
 
 struct pxa_gpio_chip {
 	struct gpio_chip chip;
-	void __iomem     *regbase;
+	void __iomem	*regbase;
+	char label[10];
+
+	unsigned long	irq_mask;
+	unsigned long	irq_edge_rise;
+	unsigned long	irq_edge_fall;
+
+#ifdef CONFIG_PM
+	unsigned long	saved_gplr;
+	unsigned long	saved_gpdr;
+	unsigned long	saved_grer;
+	unsigned long	saved_gfer;
+#endif
 };
 
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c)			\
+	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+{
+	return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
 static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	unsigned long        flags;
-	u32                  mask = 1 << offset;
-	u32                  value;
-	struct pxa_gpio_chip *pxa;
-	void __iomem         *gpdr;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-	gpdr = pxa->regbase + GPDR_OFFSET;
-	local_irq_save(flags);
-	value = __raw_readl(gpdr);
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t value, mask = 1 << offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	value = __raw_readl(base + GPDR_OFFSET);
 	if (__gpio_is_inverted(chip->base + offset))
 		value |= mask;
 	else
 		value &= ~mask;
-	__raw_writel(value, gpdr);
-	local_irq_restore(flags);
+	__raw_writel(value, base + GPDR_OFFSET);
 
+	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
 }
 
 static int pxa_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
+				     unsigned offset, int value)
 {
-	unsigned long        flags;
-	u32                  mask = 1 << offset;
-	u32                  tmp;
-	struct pxa_gpio_chip *pxa;
-	void __iomem         *gpdr;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-	__raw_writel(mask,
-			pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
-	gpdr = pxa->regbase + GPDR_OFFSET;
-	local_irq_save(flags);
-	tmp = __raw_readl(gpdr);
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t tmp, mask = 1 << offset;
+	unsigned long flags;
+
+	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	tmp = __raw_readl(base + GPDR_OFFSET);
 	if (__gpio_is_inverted(chip->base + offset))
 		tmp &= ~mask;
 	else
 		tmp |= mask;
-	__raw_writel(tmp, gpdr);
-	local_irq_restore(flags);
+	__raw_writel(tmp, base + GPDR_OFFSET);
 
+	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
 }
 
-/*
- * Return GPIO level
- */
 static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	u32                  mask = 1 << offset;
-	struct pxa_gpio_chip *pxa;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-	return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
+	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
 }
 
-/*
- * Set output GPIO level
- */
 static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	u32                  mask = 1 << offset;
-	struct pxa_gpio_chip *pxa;
-
-	pxa = container_of(chip, struct pxa_gpio_chip, chip);
-
-	if (value)
-		__raw_writel(mask, pxa->regbase + GPSR_OFFSET);
-	else
-		__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
+	__raw_writel(1 << offset, gpio_chip_base(chip) +
+				(value ? GPSR_OFFSET : GPCR_OFFSET));
 }
 
-#define GPIO_CHIP(_n)							\
-	[_n] = {							\
-		.regbase = GPIO##_n##_BASE,				\
-		.chip = {						\
-			.label		  = "gpio-" #_n,		\
-			.direction_input  = pxa_gpio_direction_input,	\
-			.direction_output = pxa_gpio_direction_output,	\
-			.get		  = pxa_gpio_get,		\
-			.set		  = pxa_gpio_set,		\
-			.base		  = (_n) * 32,			\
-			.ngpio		  = 32,				\
-		},							\
-	}
-
-static struct pxa_gpio_chip pxa_gpio_chip[] = {
-	GPIO_CHIP(0),
-	GPIO_CHIP(1),
-	GPIO_CHIP(2),
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-	GPIO_CHIP(3),
-#endif
-};
-
-static void __init pxa_init_gpio_chip(int gpio_nr)
+static int __init pxa_init_gpio_chip(int gpio_end)
 {
-	int i, gpio;
+	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+	struct pxa_gpio_chip *chips;
 
-	/* add a GPIO chip for each register bank.
-	 * the last PXA25x register only contains 21 GPIOs
+	/* this is early, we have to use bootmem allocator, and we really
+	 * want this to be allocated dynamically for different 'gpio_end'
 	 */
-	for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
-		if (gpio + 32 > gpio_nr)
-			pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
-		gpiochip_add(&pxa_gpio_chip[i].chip);
+	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	if (chips == NULL) {
+		pr_err("%s: failed to allocate GPIO chips\n", __func__);
+		return -ENOMEM;
 	}
-}
 
-/*
- * PXA GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
+	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+		struct gpio_chip *c = &chips[i].chip;
 
-static unsigned long GPIO_IRQ_rising_edge[4];
-static unsigned long GPIO_IRQ_falling_edge[4];
-static unsigned long GPIO_IRQ_mask[4];
+		sprintf(chips[i].label, "gpio-%d", i);
+		chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+		c->base  = gpio;
+		c->label = chips[i].label;
+
+		c->direction_input  = pxa_gpio_direction_input;
+		c->direction_output = pxa_gpio_direction_output;
+		c->get = pxa_gpio_get;
+		c->set = pxa_gpio_set;
+
+		/* number of GPIOs on last bank may be less than 32 */
+		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+		gpiochip_add(c);
+	}
+	pxa_gpio_chips = chips;
+	return 0;
+}
 
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
-	int gpio, idx;
+	struct pxa_gpio_chip *c;
+	int gpio = irq_to_gpio(irq);
+	unsigned long gpdr, mask = GPIO_bit(gpio);
 
-	gpio = IRQ_TO_GPIO(irq);
-	idx = gpio >> 5;
+	c = gpio_to_chip(gpio);
 
 	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		 * GPIOs set to alternate function or to output during probe
 		 */
-		if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
-		    (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
+		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
 			return 0;
 
 		if (__gpio_is_occupied(gpio))
@@ -183,23 +192,25 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
+	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
 	if (__gpio_is_inverted(gpio))
-		GPDR(gpio) |= GPIO_bit(gpio);
+		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
 	else
-		GPDR(gpio) &= ~GPIO_bit(gpio);
+		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
 
 	if (type & IRQ_TYPE_EDGE_RISING)
-		__set_bit(gpio, GPIO_IRQ_rising_edge);
+		c->irq_edge_rise |= mask;
 	else
-		__clear_bit(gpio, GPIO_IRQ_rising_edge);
+		c->irq_edge_rise &= ~mask;
 
 	if (type & IRQ_TYPE_EDGE_FALLING)
-		__set_bit(gpio, GPIO_IRQ_falling_edge);
+		c->irq_edge_fall |= mask;
 	else
-		__clear_bit(gpio, GPIO_IRQ_falling_edge);
+		c->irq_edge_fall &= ~mask;
 
-	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
-	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
 
 	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
 		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
@@ -207,60 +218,62 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	return 0;
 }
 
-/*
- * Demux handler for GPIO>=2 edge detect interrupts
- */
-
-#define GEDR_BITS	(sizeof(gedr) * BITS_PER_BYTE)
-
 static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 {
-	int loop, bit, n;
-	unsigned long gedr[4];
+	struct pxa_gpio_chip *c;
+	int loop, gpio, gpio_base, n;
+	unsigned long gedr;
 
 	do {
-		gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3;
-		gedr[1] = GEDR1 & GPIO_IRQ_mask[1];
-		gedr[2] = GEDR2 & GPIO_IRQ_mask[2];
-		gedr[3] = GEDR3 & GPIO_IRQ_mask[3];
-
-		GEDR0 = gedr[0]; GEDR1 = gedr[1];
-		GEDR2 = gedr[2]; GEDR3 = gedr[3];
-
 		loop = 0;
-		bit = find_first_bit(gedr, GEDR_BITS);
-		while (bit < GEDR_BITS) {
-			loop = 1;
+		for_each_gpio_chip(gpio, c) {
+			gpio_base = c->chip.base;
+
+			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+			gedr = gedr & c->irq_mask;
+			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
 
-			n = PXA_GPIO_IRQ_BASE + bit;
-			generic_handle_irq(n);
+			n = find_first_bit(&gedr, BITS_PER_LONG);
+			while (n < BITS_PER_LONG) {
+				loop = 1;
 
-			bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
+				generic_handle_irq(gpio_to_irq(gpio_base + n));
+				n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+			}
 		}
 	} while (loop);
 }
 
 static void pxa_ack_muxed_gpio(unsigned int irq)
 {
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	GEDR(gpio) = GPIO_bit(gpio);
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
 }
 
 static void pxa_mask_muxed_gpio(unsigned int irq)
 {
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	__clear_bit(gpio, GPIO_IRQ_mask);
-	GRER(gpio) &= ~GPIO_bit(gpio);
-	GFER(gpio) &= ~GPIO_bit(gpio);
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	uint32_t grer, gfer;
+
+	c->irq_mask &= ~GPIO_bit(gpio);
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
 }
 
 static void pxa_unmask_muxed_gpio(unsigned int irq)
 {
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	int idx = gpio >> 5;
-	__set_bit(gpio, GPIO_IRQ_mask);
-	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
-	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+	c->irq_mask |= GPIO_bit(gpio);
+	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
 }
 
 static struct irq_chip pxa_muxed_gpio_chip = {
@@ -273,15 +286,19 @@ static struct irq_chip pxa_muxed_gpio_chip = {
 
 void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
 {
-	int irq, i;
+	struct pxa_gpio_chip *c;
+	int gpio, irq;
 
 	pxa_last_gpio = end;
 
+	/* Initialize GPIO chips */
+	pxa_init_gpio_chip(end);
+
 	/* clear all GPIO edge detects */
-	for (i = start; i <= end; i += 32) {
-		GFER(i) &= ~GPIO_IRQ_mask[i];
-		GRER(i) &= ~GPIO_IRQ_mask[i];
-		GEDR(i) = GPIO_IRQ_mask[i];
+	for_each_gpio_chip(gpio, c) {
+		__raw_writel(0, c->regbase + GFER_OFFSET);
+		__raw_writel(0, c->regbase + GRER_OFFSET);
+		__raw_writel(~0,c->regbase + GEDR_OFFSET);
 	}
 
 	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
@@ -293,46 +310,39 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
 	/* Install handler for GPIO>=2 edge detect interrupts */
 	set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
 	pxa_muxed_gpio_chip.set_wake = fn;
-
-	/* Initialize GPIO chips */
-	pxa_init_gpio_chip(end + 1);
 }
 
 #ifdef CONFIG_PM
-
-static unsigned long saved_gplr[4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_grer[4];
-static unsigned long saved_gfer[4];
-
 static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
 {
-	int i, gpio;
+	struct pxa_gpio_chip *c;
+	int gpio;
 
-	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
-		saved_gplr[i] = GPLR(gpio);
-		saved_gpdr[i] = GPDR(gpio);
-		saved_grer[i] = GRER(gpio);
-		saved_gfer[i] = GFER(gpio);
+	for_each_gpio_chip(gpio, c) {
+		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
 
 		/* Clear GPIO transition detect bits */
-		GEDR(gpio) = GEDR(gpio);
+		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
 	}
 	return 0;
 }
 
 static int pxa_gpio_resume(struct sys_device *dev)
 {
-	int i, gpio;
+	struct pxa_gpio_chip *c;
+	int gpio;
 
-	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+	for_each_gpio_chip(gpio, c) {
 		/* restore level with set/clear */
-		GPSR(gpio) = saved_gplr[i];
-		GPCR(gpio) = ~saved_gplr[i];
+		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
 
-		GRER(gpio) = saved_grer[i];
-		GFER(gpio) = saved_gfer[i];
-		GPDR(gpio) = saved_gpdr[i];
+		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
 	}
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 4049b234eda..406fa102cb4 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -128,6 +128,7 @@ static inline void gpio_set_value(unsigned gpio, int value)
 }
 
 #define gpio_cansleep		__gpio_cansleep
+#define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
 #define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 9d23b731d39..7ffb91d64c3 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -24,8 +24,6 @@
 
 #include "generic.h"
 
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
 #define PGSR(x)		__REG2(0x40F00020, (x) << 2)
 #define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
 #define GAFR_L(x)	__GAFR(0, x)
-- 
cgit v1.2.3


From 5742964e916269e01a3467d2bff2601180b7da3d Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 19 Jan 2009 15:28:07 +0800
Subject: [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h

pxa-regs.h and hardware.h are not intended for use directly in driver
code, remove those unnecessary references.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/cm-x2xx-pci.c | 1 -
 arch/arm/mach-pxa/himalaya.c    | 2 --
 arch/arm/mach-pxa/pwm.c         | 1 -
 arch/arm/mach-pxa/ssp.c         | 1 -
 4 files changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 3156b25f6e9..7873fa3d8fa 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 00884e5a604..cea99fe65b9 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -26,8 +26,6 @@
 
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 3ca7ffc6904..fcdd374437a 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,6 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 6f42004db3e..965e38c6baf 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -33,7 +33,6 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/ssp.h>
-#include <mach/pxa-regs.h>
 #include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
-- 
cgit v1.2.3


From b393c69652333be31ad7a8205761c0d5b7f3e167 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 19 Jan 2009 17:34:27 +0800
Subject: [ARM] pxa: move PCMCIA definitions out of pxa-regs.h into
 pxa2xx_base.c

Move the processor specific initialization (largely resources initialization)
out of soc_common_drv_pcmcia_probe() into dedicated sa11xx_drv_pcmcia_probe()
and __pxa2xx_drv_pcmcia_probe().

By doing this, we are now able to move the PCMCIA related definitions out of
pxa-regs.h and back into pxa2xx_base.c.

As a result, remove that reference of _PCMCIA1IO in arch/arm/mach-pxa/viper.c.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/pxa-regs.h | 38 -------------------------------
 arch/arm/mach-pxa/viper.c                 |  2 +-
 2 files changed, 1 insertion(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index f06122262fe..044929aa0b4 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -27,44 +27,6 @@
 #define PXA_CS5_PHYS	0x14000000
 
 
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
-#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
-#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
-#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
-#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
-
-#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
-#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
-#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
-
-#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
-#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
-#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
-
-#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
-#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
-                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
-                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
-#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
-#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
-#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
-
-#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
-#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
-#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
-#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
-
 /*
  * Real Time Clock
  */
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 03fa5dfa990..0e65344e9f5 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -953,7 +953,7 @@ static struct map_desc viper_io_desc[] __initdata = {
 	},
 	{
 		.virtual = VIPER_PC104IO_BASE,
-		.pfn     = __phys_to_pfn(_PCMCIA1IO),
+		.pfn     = __phys_to_pfn(0x30000000),
 		.length  = 0x00800000,
 		.type    = MT_DEVICE,
 	},
-- 
cgit v1.2.3


From 5438614509d80bc0b1981b749e9cb688f1769dfb Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Mon, 19 Jan 2009 18:43:12 +0800
Subject: [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c

This isn't perfect but at least solves the problem of pm.c's dependency
on register definitions in <mach/lubbock.h>, which doesn't make much
sense.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/lubbock.h |  1 -
 arch/arm/mach-pxa/include/mach/pm.h      | 10 ++++++++++
 arch/arm/mach-pxa/lubbock.c              |  7 +++++++
 arch/arm/mach-pxa/pm.c                   | 13 +++----------
 4 files changed, 20 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 4cb24154a5a..751b74811d0 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -25,7 +25,6 @@
 
 /* FPGA register virtual addresses */
 #define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
 #define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
 #define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
 #define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 83342469aca..a6eeef8a075 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,3 +27,13 @@ extern void pxa27x_cpu_suspend(unsigned int);
 extern void pxa_cpu_resume(void);
 
 extern int pxa_pm_enter(suspend_state_t state);
+
+/* NOTE: this is for PM debugging on Lubbock,  it's really a big
+ * ugly, but let's keep the crap minimum here, instead of direct
+ * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
+ */
+#ifdef CONFIG_ARCH_LUBBOCK
+extern void lubbock_set_hexled(uint32_t value);
+#else
+#define lubbock_set_hexled(x)
+#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 03a43ea148a..f04c8333dff 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -49,6 +49,7 @@
 #include <mach/irda.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
+#include <mach/pm.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -112,8 +113,14 @@ static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
 #define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
 
+void lubbock_set_hexled(uint32_t value)
+{
+	LUB_HEXLED = value;
+}
+
 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 {
 	unsigned long flags;
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 164eb0bb632..884b174c8ea 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -14,15 +14,8 @@
 #include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
-#include <linux/time.h>
 
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/system.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
-#include <mach/lubbock.h>
-#include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 static unsigned long *sleep_save;
@@ -57,9 +50,9 @@ int pxa_pm_enter(suspend_state_t state)
 
 		/* if invalid, display message and wait for a hardware reset */
 		if (checksum != sleep_save_checksum) {
-#ifdef CONFIG_ARCH_LUBBOCK
-			LUB_HEXLED = 0xbadbadc5;
-#endif
+
+			lubbock_set_hexled(0xbadbadc5);
+
 			while (1)
 				pxa_cpu_pm_fns->enter(state);
 		}
-- 
cgit v1.2.3


From b74d1969083a8869659ad2b23138fc8a5ca97c53 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 10:31:55 +0800
Subject: [ARM] pxa: move pxa2xx chip selects definitions out of pxa-regs.h

The definitions of PXA_CS<x>_PHYS are really PXA2xx specific and should
be moved out of pxa-regs.h. As an illustration, the PXA3xx static chip
selects definitions are added into pxa3xx-regs.h.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/pxa-regs.h    | 12 ------------
 arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 11 +++++++++++
 arch/arm/mach-pxa/include/mach/pxa3xx-regs.h |  9 +++++++++
 3 files changed, 20 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 044929aa0b4..7e1e33a41b8 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -15,18 +15,6 @@
 
 #include <mach/hardware.h>
 
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
-
 /*
  * Real Time Clock
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 0b4ffd05a39..2f834de5b74 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -16,6 +16,17 @@
 
 #include <mach/pxa-regs.h>
 
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
 /*
  * Memory controller
  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 15b3b0be7f5..7d1a059b3d4 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -15,6 +15,15 @@
 
 #include <mach/hardware.h>
 
+/*
+ * Static Chip Selects
+ */
+
+#define PXA300_CS0_PHYS		(0x00000000)	/* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS		(0x30000000)	/* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS		(0x10000000)
+#define PXA3xx_CS3_PHYS		(0x14000000)
+
 /*
  * Oscillator Configuration Register (OSCC)
  */
-- 
cgit v1.2.3


From 5bf3df3f00f507119a26ba0780aa8799e741615c Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 11:04:16 +0800
Subject: [ARM] pxa: separate definitions from pxa-regs.h and remove it finally

The remaining registers are separated into:

   - <mach/regs-ost.h>
   - <mach/regs-rtc.h>
   - <mach/regs-intc.h>

and then we can remove pxa-regs.h completely. Instead of #include this
file, let's:

1. include the specific <mach/regs-*.h> with care (if that's absolutely
   necessary)

2. define the registers in the driver, make cleanly defined API to expose
   the register access to external with sufficient reason

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/common/sharpsl_pm.c                 |  2 +-
 arch/arm/mach-pxa/corgi_lcd.c                |  1 -
 arch/arm/mach-pxa/corgi_ssp.c                |  1 -
 arch/arm/mach-pxa/include/mach/mtd-xip.h     |  4 +-
 arch/arm/mach-pxa/include/mach/pxa-regs.h    | 82 ----------------------------
 arch/arm/mach-pxa/include/mach/pxa2xx-regs.h |  2 +-
 arch/arm/mach-pxa/include/mach/regs-intc.h   | 23 ++++++++
 arch/arm/mach-pxa/include/mach/regs-ost.h    | 34 ++++++++++++
 arch/arm/mach-pxa/include/mach/regs-rtc.h    | 23 ++++++++
 arch/arm/mach-pxa/include/mach/system.h      |  1 -
 arch/arm/mach-pxa/irq.c                      |  2 +-
 arch/arm/mach-pxa/mioa701.c                  |  1 +
 arch/arm/mach-pxa/reset.c                    |  2 +-
 arch/arm/mach-pxa/sharpsl_pm.c               |  1 -
 arch/arm/mach-pxa/sleep.S                    |  1 -
 arch/arm/mach-pxa/spitz_pm.c                 |  1 -
 arch/arm/mach-pxa/standby.S                  |  1 -
 arch/arm/mach-pxa/time.c                     |  3 +-
 18 files changed, 88 insertions(+), 97 deletions(-)
 delete mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h
 create mode 100644 arch/arm/mach-pxa/include/mach/regs-intc.h
 create mode 100644 arch/arm/mach-pxa/include/mach/regs-ost.h
 create mode 100644 arch/arm/mach-pxa/include/mach/regs-rtc.h

(limited to 'arch')

diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 780bbf7cb26..140f1d721d5 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -29,8 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 411607bc1fc..d9b96319d49 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -22,7 +22,6 @@
 #include <linux/string.h>
 #include <mach/corgi.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 8e2f2215c4b..a5ee70735e0 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -20,7 +20,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/ssp.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/regs-ssp.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index cfca8155be7..297387ec361 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,8 +15,8 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-intc.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
deleted file mode 100644
index 7e1e33a41b8..00000000000
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxa-regs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
-#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
-#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
-#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
-#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
-#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 2f834de5b74..4fcddd9cab7 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -14,7 +14,7 @@
 #ifndef __PXA2XX_REGS_H
 #define __PXA2XX_REGS_H
 
-#include <mach/pxa-regs.h>
+#include <mach/hardware.h>
 
 /*
  * PXA Chip selects
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
new file mode 100644
index 00000000000..ad23e74b762
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h
new file mode 100644
index 00000000000..a3e5f86ef67
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ost.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..f0e4a589bbe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index 0f381e69299..0a587c4ec70 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -13,7 +13,6 @@
 #include <asm/proc-fns.h>
 #include "hardware.h"
 #include "pxa2xx-regs.h"
-#include "pxa-regs.h"
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d3d40a31f9d..f6e0300e4f6 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -20,8 +20,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
 #include <mach/gpio.h>
+#include <mach/regs-intc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index dbda65f0e04..e77c95ca67f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -41,6 +41,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/pxa27x.h>
+#include <mach/regs-rtc.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 00b2dc2a107..867c95c0961 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <asm/proc-fns.h>
 
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 #include <mach/reset.h>
 
 unsigned int reset_status;
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index f0845c1b001..16b4ec67e3b 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -25,7 +25,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/pm.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/sharpsl.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index a62c8375eb5..2ed95f369cf 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -15,7 +15,6 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 072e77cfe5a..2e4490562c9 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -24,7 +24,6 @@
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index f3821cfda72..29f5f5c180b 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -13,7 +13,6 @@
 #include <asm/assembler.h>
 #include <mach/hardware.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 
 		.text
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 95656a72268..8eb3830fbb0 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,8 +22,7 @@
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
 
 /*
  * This is PXA's sched_clock implementation. This has a resolution
-- 
cgit v1.2.3


From bff22c9b85c911719a82b6e7cc8925dd84d278c7 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 23 Feb 2009 18:01:12 +0200
Subject: [ARM] pxa: add DM9000_PLATF_NO_EEPROM flag to CM-X... platforms

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/cm-x2xx.c | 2 +-
 arch/arm/mach-pxa/cm-x300.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 87e6877c3af..117b5435f8d 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -94,7 +94,7 @@ static struct resource cmx270_dm9000_resource[] = {
 };
 
 static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
+	.flags		= DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device cmx2xx_dm9000_device = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 6bdfcd0f5d0..a9f48b1cb54 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -160,7 +160,7 @@ static struct resource dm9000_resources[] = {
 };
 
 static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {
-- 
cgit v1.2.3


From eac84739721857f4d5be3d9127f4644f16a9bea4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 9 Mar 2009 17:47:13 +0000
Subject: ASoC: Fix Samsung S3C2412_IISMOD_SDF_{MSB,LSB} definitions

The definitions of S3C2412_IISMOD_SDF_MSB and S3C2412_IISMOD_SDF_LSB
are incorrect, being the same S3C2412_IISMOD_SDF_IIS which is the
only correct one in this series.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index a5600b381d4..0fad7571030 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -47,8 +47,8 @@
 #define S3C2412_IISMOD_LR_LLOW		(0 << 7)
 #define S3C2412_IISMOD_LR_RLOW		(1 << 7)
 #define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(0 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
 #define S3C2412_IISMOD_SDF_MASK		(3 << 5)
 #define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
 #define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
-- 
cgit v1.2.3


From 2ef7f0dab6b3d171b6aff00a47077385ae3155b5 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 6 Mar 2009 09:47:02 +0000
Subject: sh: hibernation support

Add Suspend-to-disk / swsusp / CONFIG_HIBERNATION support
to the SuperH architecture.

To suspend, use "swapon /dev/sda2; echo disk > /sys/power/state"
To resume, pass "resume=/dev/sda2" on the kernel command line.

The patch "pm: rework includes, remove arch ifdefs V2" is
needed to allow the generic swsusp code to build properly.

Hibernation is not enabled with this patch though, a patch
setting ARCH_HIBERNATION_POSSIBLE will be submitted later.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/sections.h  |   1 +
 arch/sh/include/asm/suspend.h   |  13 ++++
 arch/sh/kernel/Makefile_32      |   1 +
 arch/sh/kernel/asm-offsets.c    |   8 +++
 arch/sh/kernel/cpu/sh3/Makefile |   2 +
 arch/sh/kernel/cpu/sh3/entry.S  |  22 ++++--
 arch/sh/kernel/cpu/sh3/swsusp.S | 147 ++++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4/Makefile |   1 +
 arch/sh/kernel/swsusp.c         |  38 +++++++++++
 9 files changed, 228 insertions(+), 5 deletions(-)
 create mode 100644 arch/sh/include/asm/suspend.h
 create mode 100644 arch/sh/kernel/cpu/sh3/swsusp.S
 create mode 100644 arch/sh/kernel/swsusp.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 8f8f4ad400d..01a4076a371 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -3,6 +3,7 @@
 
 #include <asm-generic/sections.h>
 
+extern void __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
 extern char _ebss[];
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
new file mode 100644
index 00000000000..5d6d8aba568
--- /dev/null
+++ b/arch/sh/include/asm/suspend.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SH_SUSPEND_H
+#define _ASM_SH_SUSPEND_H
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+	struct pt_regs user_regs;
+	unsigned long bank1_regs[8];
+};
+
+#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 2e1b86e16ab..82a3a150c00 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -30,5 +30,6 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index 57cf0e0680f..99aceb28ee2 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -12,8 +12,10 @@
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/kbuild.h>
+#include <linux/suspend.h>
 
 #include <asm/thread_info.h>
+#include <asm/suspend.h>
 
 int main(void)
 {
@@ -25,5 +27,11 @@ int main(void)
 	DEFINE(TI_PRE_COUNT,	offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
 
+#ifdef CONFIG_HIBERNATION
+	DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
+	DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
+	DEFINE(PBE_NEXT, offsetof(struct pbe, next));
+	DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
+#endif
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index e07c69e16d9..ecab274141a 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -4,6 +4,8 @@
 
 obj-y	:= ex.o probe.o entry.o setup-sh3.o
 
+obj-$(CONFIG_HIBERNATION)		+= swsusp.o
+
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7706)	+= setup-sh770x.o
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index c4829d6dee5..fba6ac20bb1 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -216,7 +216,7 @@ ENTRY(sh_bios_handler)
 ! r9 trashed
 ! BL=0 on entry, on exit BL=1 (depending on r8).
 
-restore_regs:
+ENTRY(restore_regs)
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
 	mov.l	@r15+, r2
@@ -362,8 +362,10 @@ general_exception:
 	 nop
 
 	! Save registers / Switch to bank 0
+	mov.l	k4, k2		! keep vector in k2
+	mov.l	1f, k4		! SR bits to clear in k4
 	bsr	save_regs	! needs original pr value in k3
-	 mov	k4, k2		! keep vector in k2
+	 nop
 
 	bra	handle_exception_special
 	 nop
@@ -471,6 +473,7 @@ handle_exception:
 
 	! Save registers / Switch to bank 0
 	mov.l	5f, k2		! vector register address
+	mov.l	1f, k4		! SR bits to clear in k4
 	bsr	save_regs	! needs original pr value in k3
 	 mov.l	@k2, k2		! read out vector and keep in k2
 
@@ -495,10 +498,10 @@ handle_exception_special:
 ! k0 contains original stack pointer*
 ! k1 trashed
 ! k3 passes original pr*
-! k4 trashed
+! k4 passes SR bitmask
 ! BL=1 on entry, on exit BL=0.
 
-save_regs:
+ENTRY(save_regs)
 	mov	#-1, r1
 	mov.l	k1, @-r15	! set TRA (default: -1)
 	sts.l	macl, @-r15
@@ -518,8 +521,16 @@ save_regs:
 	mov.l	r8, @-r15
 
 	mov.l	0f, k3		! SR bits to set in k3
-	mov.l	1f, k4		! SR bits to clear in k4
 
+	! fall-through
+
+! save_low_regs()
+! - modify SR for bank switch
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k3 passes bits to set in SR
+! k4 passes bits to clear in SR
+
+ENTRY(save_low_regs)
 	stc	sr, r8
 	or	k3, r8
 	and	k4, r8
@@ -565,6 +576,7 @@ ENTRY(handle_interrupt)
 	 PREF(k0)
 
 	! Save registers / Switch to bank 0
+	mov.l	1f, k4		! SR bits to clear in k4
 	bsr	save_regs	! needs original pr value in k3
 	 mov	#-1, k2		! default vector kept in k2
 
diff --git a/arch/sh/kernel/cpu/sh3/swsusp.S b/arch/sh/kernel/cpu/sh3/swsusp.S
new file mode 100644
index 00000000000..01145426a2b
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/swsusp.S
@@ -0,0 +1,147 @@
+/*
+ * arch/sh/kernel/cpu/sh3/swsusp.S
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+
+#define k0	r0
+#define k1	r1
+#define k2	r2
+#define k3	r3
+#define k4	r4
+
+! swsusp_arch_resume()
+! - copy restore_pblist pages
+! - restore registers from swsusp_arch_regs_cpu0
+
+ENTRY(swsusp_arch_resume)
+	mov.l	1f, r15
+	mov.l	2f, r4
+	mov.l	@r4, r4
+
+swsusp_copy_loop:
+	mov	r4, r0
+	cmp/eq	#0, r0
+	bt	swsusp_restore_regs
+
+	mov.l	@(PBE_ADDRESS, r4), r2
+	mov.l	@(PBE_ORIG_ADDRESS, r4), r5
+
+	mov	#(PAGE_SIZE >> 10), r3
+	shll8	r3
+	shlr2	r3 /* PAGE_SIZE / 16 */
+swsusp_copy_page:
+	dt	r3
+	mov.l	@r2+,r1   /*  16n+0 */
+	mov.l	r1,@r5
+	add	#4,r5
+	mov.l	@r2+,r1	  /*  16n+4 */
+	mov.l	r1,@r5
+	add	#4,r5
+	mov.l	@r2+,r1   /*  16n+8 */
+	mov.l	r1,@r5
+	add	#4,r5
+	mov.l	@r2+,r1   /*  16n+12 */
+	mov.l	r1,@r5
+	bf/s	swsusp_copy_page
+	 add	#4,r5
+
+	bra	swsusp_copy_loop
+	 mov.l	@(PBE_NEXT, r4), r4
+
+swsusp_restore_regs:
+	! BL=0: R7->R0 is bank0
+	mov.l	3f, r8
+	mov.l	4f, r5
+	jsr	@r5
+	 nop
+
+	! BL=1: R7->R0 is bank1
+	lds	k2, pr
+	ldc	k3, ssr
+
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+
+	rte
+	 nop
+	! BL=0: R7->R0 is bank0
+
+	.align	2
+1:	.long	swsusp_arch_regs_cpu0
+2:	.long	restore_pblist
+3:	.long	0x20000000 ! RB=1
+4:	.long	restore_regs
+
+! swsusp_arch_suspend()
+! - prepare pc for resume, return from function without swsusp_save on resume
+! - save registers in swsusp_arch_regs_cpu0
+! - call swsusp_save write suspend image
+
+ENTRY(swsusp_arch_suspend)
+	sts	pr, r0		! save pr in r0
+	mov	r15, r2		! save sp in r2
+	mov	r8, r5		! save r8 in r5
+	stc	sr, r1
+	ldc	r1, ssr		! save sr in ssr
+	mov.l	1f, r1
+	ldc	r1, spc		! setup pc value for resuming
+	mov.l	5f, r15		! use swsusp_arch_regs_cpu0 as stack
+	mov.l	6f, r3
+	add	r3, r15		! save from top of structure
+
+	! BL=0: R7->R0 is bank0
+	mov.l	2f, r3		! get new SR value for bank1
+	mov	#0, r4
+	mov.l	7f, r1
+	jsr	@r1		! switch to bank1 and save bank1 r7->r0
+	 not	r4, r4
+
+	! BL=1: R7->R0 is bank1
+	stc	r2_bank, k0	! fetch old sp from r2_bank0
+	mov.l	3f, k4		! SR bits to clear in k4
+	mov.l	8f, k1
+	jsr	@k1		! switch to bank0 and save all regs
+	 stc	r0_bank, k3	! fetch old pr from r0_bank0
+
+	! BL=0: R7->R0 is bank0
+	mov	r2, r15		! restore old sp
+	mov	r5, r8		! restore old r8
+	stc	ssr, r1
+	ldc	r1, sr		! restore old sr
+	lds	r0, pr		! restore old pr
+	mov.l	4f, r0
+	jmp	@r0
+	 nop
+
+swsusp_call_save:
+	mov	r2, r15		! restore old sp
+	mov	r5, r8		! restore old r8
+	lds	r0, pr		! restore old pr
+	rts
+	 mov	#0, r0
+
+	.align	2
+1:	.long	swsusp_call_save
+2:	.long	0x20000000 ! RB=1
+3:	.long	0xdfffffff ! RB=0
+4:	.long	swsusp_save
+5:	.long	swsusp_arch_regs_cpu0
+6:	.long	SWSUSP_ARCH_REGS_SIZE
+7:	.long	save_low_regs
+8:	.long	save_regs
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index d608557c7a3..203b18347b8 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -5,6 +5,7 @@
 obj-y	:= probe.o common.o
 common-y	+= $(addprefix ../sh3/, entry.o ex.o)
 
+obj-$(CONFIG_HIBERNATION)		+= $(addprefix ../sh3/, swsusp.o)
 obj-$(CONFIG_SH_FPU)			+= fpu.o softfloat.o
 obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
 
diff --git a/arch/sh/kernel/swsusp.c b/arch/sh/kernel/swsusp.c
new file mode 100644
index 00000000000..12b64a0f2f0
--- /dev/null
+++ b/arch/sh/kernel/swsusp.c
@@ -0,0 +1,38 @@
+/*
+ * swsusp.c - SuperH hibernation support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fpu.h>
+
+struct swsusp_arch_regs swsusp_arch_regs_cpu0;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+
+	return (pfn >= begin_pfn) && (pfn < end_pfn);
+}
+
+void save_processor_state(void)
+{
+	init_fpu(current);
+}
+
+void restore_processor_state(void)
+{
+	local_flush_tlb_all();
+}
-- 
cgit v1.2.3


From 508407149a7f927c4b65a20e0a08a2a94dc769c6 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Tue, 10 Mar 2009 06:13:22 +0000
Subject: sh: Show sleep state with Migo-R LEDs

If CONFIG_PM is set, let Migo-R LEDs show sleep states.
D11 will show STATUS0 and D12 PDSTATUS.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-migor/setup.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 28e56c5809a..bc35b4cae6b 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -450,6 +450,14 @@ static struct spi_board_info migor_spi_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+
+#ifdef CONFIG_PM
+	/* Let D11 LED show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit D12 LED show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
 	/* Lit D11 LED */
 	gpio_request(GPIO_PTJ7, NULL);
 	gpio_direction_output(GPIO_PTJ7, 1);
@@ -459,6 +467,7 @@ static int __init migor_devices_setup(void)
 	gpio_request(GPIO_PTJ5, NULL);
 	gpio_direction_output(GPIO_PTJ5, 1);
 	gpio_export(GPIO_PTJ5, 0);
+#endif
 
 	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
 	gpio_request(GPIO_FN_IRQ0, NULL);
-- 
cgit v1.2.3


From 2f47f44790a9c8fc43e515df3c6be19a35ee5de5 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Tue, 10 Mar 2009 15:49:54 +0900
Subject: sh: Support fixed 32-bit PMB mappings from bootloader.

This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.

P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/Makefile           | 20 ++++++++++--------
 arch/sh/include/asm/addrspace.h |  4 ++--
 arch/sh/include/asm/io.h        |  4 ++--
 arch/sh/include/asm/page.h      |  7 ++++++-
 arch/sh/kernel/vmlinux_32.lds.S |  5 ++++-
 arch/sh/mm/Kconfig              | 29 +++++++++++++++++++++++++-
 arch/sh/mm/Makefile_32          |  1 +
 arch/sh/mm/ioremap_32.c         |  6 ++++--
 arch/sh/mm/pmb-fixed.c          | 45 +++++++++++++++++++++++++++++++++++++++++
 9 files changed, 104 insertions(+), 17 deletions(-)
 create mode 100644 arch/sh/mm/pmb-fixed.c

(limited to 'arch')

diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index c16ccd4bfa1..95483d16125 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -33,20 +33,24 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
-ifeq ($(CONFIG_32BIT),y)
-KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_ZERO_PAGE_OFFSET)]')
-else
+KERNEL_MEMORY := 0x00000000
+ifeq ($(CONFIG_PMB_FIXED),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+endif
+ifeq ($(CONFIG_29BIT),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START)]')
+endif
+
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
+			$(KERNEL_MEMORY) + \
 			$(CONFIG_ZERO_PAGE_OFFSET)]')
-endif
 
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
+			$(KERNEL_MEMORY) + \
 			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 36736c7e93d..80d40813e05 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -31,7 +31,7 @@
 /* Returns the physical address of a PnSEG (n=1,2) address   */
 #define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
 
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
 /*
  * Map an address to a certain privileged segment
  */
@@ -43,7 +43,7 @@
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
 #define P4SEGADDR(a)	\
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
+#endif /* 29BIT || PMB_FIXED */
 #endif /* P1SEG */
 
 /* Check if an address can be reached in 29 bits */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 61f6dae4053..0454f8d6805 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -238,7 +238,7 @@ extern void onchip_unmap(unsigned long vaddr);
 static inline void __iomem *
 __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 {
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
 	unsigned long last_addr = offset + size - 1;
 #endif
 	void __iomem *ret;
@@ -247,7 +247,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
 	/*
 	 * For P1 and P2 space this is trivial, as everything is already
 	 * mapped. Uncached access for P1 addresses are done through P2.
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 5871d78e47e..9c6d21ec024 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -129,7 +129,12 @@ typedef struct page *pgtable_t;
  * is not visible (it is part of the PMB mapping) and so needs to be
  * added or subtracted as required.
  */
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_PMB_FIXED)
+/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */
+#define PMB_OFFSET	(PAGE_OFFSET - PXSEG(__MEMORY_START))
+#define __pa(x)	((unsigned long)(x) - PMB_OFFSET)
+#define __va(x)	((void *)((unsigned long)(x) + PMB_OFFSET))
+#elif defined(CONFIG_32BIT)
 #define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
 #define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
 #else
diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S
index 7b4b82bd115..d0b2a715cd1 100644
--- a/arch/sh/kernel/vmlinux_32.lds.S
+++ b/arch/sh/kernel/vmlinux_32.lds.S
@@ -15,7 +15,10 @@ OUTPUT_ARCH(sh)
 ENTRY(_start)
 SECTIONS
 {
-#ifdef CONFIG_32BIT
+#ifdef CONFIG_PMB_FIXED
+	. = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
+	    CONFIG_ZERO_PAGE_OFFSET;
+#elif defined(CONFIG_32BIT)
 	. = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
 #else
 	. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 555ec9714b9..10c24356d2d 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -57,7 +57,7 @@ config 32BIT
 	bool
 	default y if CPU_SH5
 
-config PMB
+config PMB_ENABLE
 	bool "Support 32-bit physical addressing through PMB"
 	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	select 32BIT
@@ -67,6 +67,33 @@ config PMB
 	  32-bits through the SH-4A PMB. If this is not set, legacy
 	  29-bit physical addressing will be used.
 
+choice
+	prompt "PMB handling type"
+	depends on PMB_ENABLE
+	default PMB_FIXED
+
+config PMB
+	bool "PMB"
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+	select 32BIT
+	help
+	  If you say Y here, physical addressing will be extended to
+	  32-bits through the SH-4A PMB. If this is not set, legacy
+	  29-bit physical addressing will be used.
+
+config PMB_FIXED
+	bool "fixed PMB"
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || \
+					   CPU_SUBTYPE_SH7785)
+	select 32BIT
+	help
+	  If this option is enabled, fixed PMB mappings are inherited
+	  from the boot loader, and the kernel does not attempt dynamic
+	  management. This is the closest to legacy 29-bit physical mode,
+	  and allows systems to support up to 512MiB of system memory.
+
+endchoice
+
 config X2TLB
 	bool "Enable extended TLB mode"
 	depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index cb2f3f29959..469ff167245 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -35,6 +35,7 @@ endif
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PMB)		+= pmb.o
+obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
 obj-$(CONFIG_NUMA)		+= numa.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index 8dc77026a0b..60cc486d2c2 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -59,11 +59,13 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
 		return (void __iomem *)phys_addr;
 
+#if !defined(CONFIG_PMB_FIXED)
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
 	if (phys_addr < virt_to_phys(high_memory))
 		return NULL;
+#endif
 
 	/*
 	 * Mappings have to be page-aligned
@@ -81,7 +83,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	area->phys_addr = phys_addr;
 	orig_addr = addr = (unsigned long)area->addr;
 
-#ifdef CONFIG_32BIT
+#ifdef CONFIG_PMB
 	/*
 	 * First try to remap through the PMB once a valid VMA has been
 	 * established. Smaller allocations (or the rest of the size
@@ -122,7 +124,7 @@ void __iounmap(void __iomem *addr)
 	if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
 		return;
 
-#ifdef CONFIG_32BIT
+#ifdef CONFIG_PMB
 	/*
 	 * Purge any PMB entries that may have been established for this
 	 * mapping, then proceed with conventional VMA teardown.
diff --git a/arch/sh/mm/pmb-fixed.c b/arch/sh/mm/pmb-fixed.c
new file mode 100644
index 00000000000..43c8eac4d8a
--- /dev/null
+++ b/arch/sh/mm/pmb-fixed.c
@@ -0,0 +1,45 @@
+/*
+ * arch/sh/mm/fixed_pmb.c
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+
+static int __uses_jump_to_uncached fixed_pmb_init(void)
+{
+	int i;
+	unsigned long addr, data;
+
+	jump_to_uncached();
+
+	for (i = 0; i < PMB_ENTRY_MAX; i++) {
+		addr = PMB_DATA + (i << PMB_E_SHIFT);
+		data = ctrl_inl(addr);
+		if (!(data & PMB_V))
+			continue;
+
+		if (data & PMB_C) {
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+			data |= PMB_WT;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+			data &= ~PMB_WT;
+#else
+			data &= ~(PMB_C | PMB_WT);
+#endif
+		}
+		ctrl_outl(data, addr);
+	}
+
+	back_to_cached();
+
+	return 0;
+}
+arch_initcall(fixed_pmb_init);
-- 
cgit v1.2.3


From df4d4f1a47ed6080c7b4010149126bd1013dc3f1 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Tue, 10 Mar 2009 15:50:44 +0900
Subject: sh: sh7785lcr: Updates for fixed PMB.

Add a new defconfig for SH7785LCR in 32-bit mode, and update the power
off code to avoid 29-bit assumptions.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig                    |    2 +-
 arch/sh/boards/board-sh7785lcr.c          |   10 +-
 arch/sh/configs/sh7785lcr_32bit_defconfig | 1553 +++++++++++++++++++++++++++++
 3 files changed, 1563 insertions(+), 2 deletions(-)
 create mode 100644 arch/sh/configs/sh7785lcr_32bit_defconfig

(limited to 'arch')

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 694abecf602..bd3569a9934 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -155,7 +155,7 @@ config SH_SH7785LCR
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
-	depends on SH_SH7785LCR
+	depends on SH_SH7785LCR && 29BIT
 	default y
 	help
 	  This board has 2 physical memory maps. It can be changed with
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 38a64968d7b..6746a5fba3a 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -275,7 +275,15 @@ void __init init_sh7785lcr_IRQ(void)
 
 static void sh7785lcr_power_off(void)
 {
-	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+	unsigned char *p;
+
+	p = ioremap(PLD_POFCR, PLD_POFCR + 1);
+	if (!p) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+	*p = 0x01;
+	iounmap(p);
 }
 
 /* Initialize the board */
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
new file mode 100644
index 00000000000..54e1dee8e24
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -0,0 +1,1553 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Fri Feb 20 18:25:29 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x20000000
+# CONFIG_29BIT is not set
+CONFIG_32BIT=y
+CONFIG_PMB_ENABLE=y
+# CONFIG_PMB is not set
+CONFIG_PMB_FIXED=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 8ffe31334262108be343d92e81649f9dc3efe826 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Tue, 10 Mar 2009 15:51:49 +0900
Subject: sh: pci-sh7780: fix pci memory address for fixed PMB

Fix the problem that cannot work a PCI device when 32-bit physical
address mode.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/pci-sh7780.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 078dc44d6b0..773d575a04b 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -127,8 +127,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	pci_write_reg(word, SH4_PCILSR0);
 	pci_write_reg(0x00000001, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
-	word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000;
-	pci_write_reg(word | 0xa0000000, SH4_PCILAR0);
+	word = CONFIG_MEMORY_START | (CONFIG_MEMORY_SIZE - 0x01000000);
+	pci_write_reg(word, SH4_PCILAR0);
 	pci_write_reg(word, SH7780_PCIMBAR0);
 	/* Set the values on window 1 PCI config registers */
 	pci_write_reg(0x00000000, SH4_PCILAR1);
-- 
cgit v1.2.3


From dc65a977ce59f2c3171ea451b90c7e5effb6737e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 10 Mar 2009 16:26:29 +0900
Subject: sh: Define ARCH_SHMOBILE for SH-Mobile CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index a4c2c845863..adffbf4048b 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -179,6 +179,9 @@ config CPU_SHX2
 config CPU_SHX3
 	bool
 
+config ARCH_SHMOBILE
+	bool
+
 choice
 	prompt "Processor sub-type selection"
 
@@ -330,6 +333,7 @@ config CPU_SUBTYPE_SH7723
 	bool "Support SH7723 processor"
 	select CPU_SH4A
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_CMT
 	help
@@ -377,12 +381,14 @@ config CPU_SUBTYPE_SHX3
 config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP
+	select ARCH_SHMOBILE
 	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7722
 	bool "Support SH7722 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_CMT
@@ -391,6 +397,7 @@ config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_CMT
-- 
cgit v1.2.3


From 19390c4d03688b9940a1836f06b76ec622b9cd6f Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 10 Mar 2009 16:27:48 +0900
Subject: linker script: define __per_cpu_load on all SMP capable archs

Impact: __per_cpu_load available on all SMP capable archs

Percpu now requires three symbols to be defined - __per_cpu_load,
__per_cpu_start and __per_cpu_end.  There were three archs which
didn't have it.  Update them as follows.

* powerpc: can use generic PERCPU() macro.  Compile tested for
  powerpc32, compile/boot tested for powerpc64.

* ia64: can use generic PERCPU_VADDR() macro.  __phys_per_cpu_start is
  identical to __per_cpu_load.  Compile tested and symbol table looks
  identical after the change except for the additional __per_cpu_load.

* arm: added explicit __per_cpu_load definition.  Currently uses
  unified .init output section so can't use the generic macro.  Dunno
  whether the unified .init ouput section is required by arch
  peculiarity so I left it alone.  Please break it up and use PERCPU()
  if possible.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Russell King <rmk@arm.linux.org.uk>
---
 arch/arm/kernel/vmlinux.lds.S     |  1 +
 arch/ia64/kernel/vmlinux.lds.S    | 12 ++----------
 arch/powerpc/kernel/vmlinux.lds.S |  9 +--------
 3 files changed, 4 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 85598f7da40..1602373e539 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -64,6 +64,7 @@ SECTIONS
 		__initramfs_end = .;
 #endif
 		. = ALIGN(4096);
+		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
 			*(.data.percpu)
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index f45e4e508ec..3765efc5f96 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -213,17 +213,9 @@ SECTIONS
         { *(.data.cacheline_aligned) }
 
   /* Per-cpu data: */
-  percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
-  __phys_per_cpu_start = .;
-  .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
-	{
-		__per_cpu_start = .;
-		*(.data.percpu.page_aligned)
-		*(.data.percpu)
-		*(.data.percpu.shared_aligned)
-		__per_cpu_end = .;
-	}
+  PERCPU_VADDR(PERCPU_ADDR, :percpu)
+  __phys_per_cpu_start = __per_cpu_load;
   . = __phys_per_cpu_start + PERCPU_PAGE_SIZE;	/* ensure percpu data fits
   						 * into percpu page size
 						 */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 295ccc5e86b..67f07f45338 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -181,14 +181,7 @@ SECTIONS
 		__initramfs_end = .;
 	}
 #endif
-	. = ALIGN(PAGE_SIZE);
-	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
-		__per_cpu_start = .;
-		*(.data.percpu.page_aligned)
-		*(.data.percpu)
-		*(.data.percpu.shared_aligned)
-		__per_cpu_end = .;
-	}
+	PERCPU(PAGE_SIZE)
 
 	. = ALIGN(8);
 	.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
-- 
cgit v1.2.3


From e01009833e22dc87075d770554b34d797843ed23 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 10 Mar 2009 16:27:48 +0900
Subject: percpu: make x86 addr <-> pcpu ptr conversion macros generic

Impact: generic addr <-> pcpu ptr conversion macros

There's nothing arch specific about x86 __addr_to_pcpu_ptr() and
__pcpu_ptr_to_addr().  With proper __per_cpu_load and __per_cpu_start
defined, they'll do the right thing regardless of actual layout.

Move these macros from arch/x86/include/asm/percpu.h to mm/percpu.c
and allow archs to override it as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/include/asm/percpu.h | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 8f1d2fbec1d..aee103b26d0 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -43,14 +43,6 @@
 #else /* ...!ASSEMBLY */
 
 #include <linux/stringify.h>
-#include <asm/sections.h>
-
-#define __addr_to_pcpu_ptr(addr)					\
-	(void *)((unsigned long)(addr) - (unsigned long)pcpu_base_addr	\
-		 + (unsigned long)__per_cpu_start)
-#define __pcpu_ptr_to_addr(ptr)						\
-	(void *)((unsigned long)(ptr) + (unsigned long)pcpu_base_addr	\
-		 - (unsigned long)__per_cpu_start)
 
 #ifdef CONFIG_SMP
 #define __percpu_arg(x)		"%%"__stringify(__percpu_seg)":%P" #x
-- 
cgit v1.2.3


From 6074d5b0a319fe8400ff079a3c289406ca024321 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 10 Mar 2009 16:27:48 +0900
Subject: percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()

Impact: cleanup, more flexibility for first chunk init

Non-negative @dyn_size used to be allowed iff @unit_size wasn't auto.
This restriction stemmed from implementation detail and made things a
bit less intuitive.  This patch allows @dyn_size to be specified
regardless of @unit_size and swaps the positions of @dyn_size and
@unit_size so that the parameter order makes more sense (static,
reserved and dyn sizes followed by enclosing unit_size).

While at it, add @unit_size >= PCPU_MIN_UNIT_SIZE sanity check.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index efa615f2bf4..e41c51f6ada 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -233,8 +233,8 @@ proceed:
 		"%zu bytes\n", vm.addr, static_size);
 
 	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE,
-				     PMD_SIZE, dyn_size, vm.addr, NULL);
+				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
+				     PMD_SIZE, vm.addr, NULL);
 	goto out_free_ar;
 
 enomem:
@@ -315,9 +315,8 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 		pcpue_size >> PAGE_SHIFT, pcpue_ptr, static_size);
 
 	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
-				      PERCPU_FIRST_CHUNK_RESERVE,
-				      pcpue_unit_size, dyn_size,
-				      pcpue_ptr, NULL);
+				      PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
+				      pcpue_unit_size, pcpue_ptr, NULL);
 }
 
 /*
@@ -375,8 +374,8 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 		pcpu4k_nr_static_pages, static_size);
 
 	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE, -1, -1, NULL,
-				     pcpu4k_populate_pte);
+				     PERCPU_FIRST_CHUNK_RESERVE, -1,
+				     -1, NULL, pcpu4k_populate_pte);
 	goto out_free_ar;
 
 enomem:
-- 
cgit v1.2.3


From 66c3a75772247c31feabefb724e082220a1ab060 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 10 Mar 2009 16:27:48 +0900
Subject: percpu: generalize embedding first chunk setup helper

Impact: code reorganization

Separate out embedding first chunk setup helper from x86 embedding
first chunk allocator and put it in mm/percpu.c.  This will be used by
the default percpu first chunk allocator and possibly by other archs.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 54 +++++-------------------------------------
 1 file changed, 6 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index e41c51f6ada..400331b50a5 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -257,31 +257,13 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
  * Embedding allocator
  *
  * The first chunk is sized to just contain the static area plus
- * module and dynamic reserves, and allocated as a contiguous area
- * using bootmem allocator and used as-is without being mapped into
- * vmalloc area.  This enables the first chunk to piggy back on the
- * linear physical PMD mapping and doesn't add any additional pressure
- * to TLB.  Note that if the needed size is smaller than the minimum
- * unit size, the leftover is returned to the bootmem allocator.
+ * module and dynamic reserves and embedded into linear physical
+ * mapping so that it can use PMD mapping without additional TLB
+ * pressure.
  */
-static void *pcpue_ptr __initdata;
-static size_t pcpue_size __initdata;
-static size_t pcpue_unit_size __initdata;
-
-static struct page * __init pcpue_get_page(unsigned int cpu, int pageno)
-{
-	size_t off = (size_t)pageno << PAGE_SHIFT;
-
-	if (off >= pcpue_size)
-		return NULL;
-
-	return virt_to_page(pcpue_ptr + cpu * pcpue_unit_size + off);
-}
-
 static ssize_t __init setup_pcpu_embed(size_t static_size)
 {
-	unsigned int cpu;
-	size_t dyn_size;
+	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
 	/*
 	 * If large page isn't supported, there's no benefit in doing
@@ -291,32 +273,8 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 	if (!cpu_has_pse || pcpu_need_numa())
 		return -EINVAL;
 
-	/* allocate and copy */
-	pcpue_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
-			       PERCPU_DYNAMIC_RESERVE);
-	pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
-	dyn_size = pcpue_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
-
-	pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
-				       PAGE_SIZE);
-	if (!pcpue_ptr)
-		return -ENOMEM;
-
-	for_each_possible_cpu(cpu) {
-		void *ptr = pcpue_ptr + cpu * pcpue_unit_size;
-
-		free_bootmem(__pa(ptr + pcpue_size),
-			     pcpue_unit_size - pcpue_size);
-		memcpy(ptr, __per_cpu_load, static_size);
-	}
-
-	/* we're ready, commit */
-	pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n",
-		pcpue_size >> PAGE_SHIFT, pcpue_ptr, static_size);
-
-	return pcpu_setup_first_chunk(pcpue_get_page, static_size,
-				      PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				      pcpue_unit_size, pcpue_ptr, NULL);
+	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE, -1);
 }
 
 /*
-- 
cgit v1.2.3


From ae68df5635a191c7edb75f5c1c1406353cb24a9f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 10 Mar 2009 17:00:48 +0900
Subject: sh: Generate uImage by default on Urquell board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 4067b0d9287..bece1f7535f 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -80,6 +80,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)			:= zImage
 defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
 defaultimage-$(CONFIG_SH_RSK)			:= uImage
+defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
 defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
 
-- 
cgit v1.2.3


From 71b973a42c5456824c8712e00659d9616d395919 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Tue, 10 Mar 2009 17:26:49 +0900
Subject: sh: dma-sh updates for multi IRQ and new SH-4A CPUs.

This adds DMA support for newer SH-4A CPUs, particularly SH7763/64/80/85.

This also enables multi IRQ support for platforms that have multiple
vectors bound to the same IRQ source.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/Kconfig              |   8 +-
 arch/sh/drivers/dma/dma-sh.c             | 172 +++++++++++++++++++++----------
 arch/sh/drivers/dma/dma-sh.h             |  75 --------------
 arch/sh/include/asm/dma-sh.h             | 117 +++++++++++++++++++++
 arch/sh/include/asm/dma.h                |   4 +-
 arch/sh/include/cpu-sh3/cpu/dma.h        |  17 ++-
 arch/sh/include/cpu-sh4/cpu/dma-sh4a.h   |  94 +++++++++++++++++
 arch/sh/include/cpu-sh4/cpu/dma-sh7780.h |  39 -------
 arch/sh/include/cpu-sh4/cpu/dma.h        |  30 +++---
 9 files changed, 352 insertions(+), 204 deletions(-)
 delete mode 100644 arch/sh/drivers/dma/dma-sh.h
 create mode 100644 arch/sh/include/asm/dma-sh.h
 create mode 100644 arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
 delete mode 100644 arch/sh/include/cpu-sh4/cpu/dma-sh7780.h

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 01936368b8b..57d95fce046 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -12,10 +12,10 @@ config SH_DMA
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
-	default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
-	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
-	default "12" if CPU_SUBTYPE_SH7780
-	default "4"
+	default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7750S
+	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7760
+	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
 	  DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 50887a592dd..ab7b18dcbab 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -17,28 +17,23 @@
 #include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include "dma-sh.h"
-
-static int dmte_irq_map[] = {
-	DMTE0_IRQ,
-	DMTE1_IRQ,
-	DMTE2_IRQ,
-	DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7721)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7709)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE4_IRQ,
-	DMTE5_IRQ,
+#include <asm/dma-sh.h>
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7764)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define DMAC_IRQ_MULTI	1
 #endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE6_IRQ,
-	DMTE7_IRQ,
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE		2
+#else
+#define NR_DMAE		1
 #endif
+
+static const char *dmae_name[] = {
+	"DMAC Address Error0", "DMAC Address Error1"
 };
 
 static inline unsigned int get_dmte_irq(unsigned int chan)
@@ -46,7 +41,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
 	unsigned int irq = 0;
 	if (chan < ARRAY_SIZE(dmte_irq_map))
 		irq = dmte_irq_map[chan];
+
+#if defined(DMAC_IRQ_MULTI)
+	if (irq > DMTE6_IRQ)
+		return DMTE6_IRQ;
+	return DMTE0_IRQ;
+#else
 	return irq;
+#endif
 }
 
 /*
@@ -59,7 +61,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
  */
 static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
 {
-	u32 chcr = ctrl_inl(CHCR[chan->chan]);
+	u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
 }
@@ -75,13 +77,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
 	struct dma_channel *chan = dev_id;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	if (!(chcr & CHCR_TE))
 		return IRQ_NONE;
 
 	chcr &= ~(CHCR_IE | CHCR_DE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	wake_up(&chan->wait_queue);
 
@@ -94,7 +96,12 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 		return 0;
 
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-			   IRQF_DISABLED, chan->dev_id, chan);
+#if defined(DMAC_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
+#endif
+				chan->dev_id, chan);
 }
 
 static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -115,7 +122,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 		chan->flags &= ~DMA_TEI_CAPABLE;
 	}
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	chan->flags |= DMA_CONFIGURED;
 	return 0;
@@ -126,13 +133,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
 	int irq;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr |= CHCR_DE;
 
 	if (chan->flags & DMA_TEI_CAPABLE)
 		chcr |= CHCR_IE;
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	if (chan->flags & DMA_TEI_CAPABLE) {
 		irq = get_dmte_irq(chan->chan);
@@ -150,9 +157,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
 		disable_irq(irq);
 	}
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 }
 
 static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +190,13 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 	 */
 	if (chan->sar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->sar, SAR[chan->chan]);
+		ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
 	if (chan->dar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->dar, DAR[chan->chan]);
+		ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
 
-	ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
+	ctrl_outl(chan->count >> calc_xmit_shift(chan),
+		(dma_base_addr[chan->chan] + TCR));
 
 	sh_dmac_enable_dma(chan);
 
@@ -197,36 +205,26 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 
 static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 {
-	if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE))
+	if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
 		return 0;
 
-	return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
+	return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+		 << calc_xmit_shift(chan);
 }
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define dmaor_read_reg()	ctrl_inw(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outw(data, DMAOR)
-#else
-#define dmaor_read_reg()	ctrl_inl(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outl(data, DMAOR)
-#endif
-
-static inline int dmaor_reset(void)
+static inline int dmaor_reset(int no)
 {
-	unsigned long dmaor = dmaor_read_reg();
+	unsigned long dmaor = dmaor_read_reg(no);
 
 	/* Try to clear the error flags first, incase they are set */
 	dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	dmaor |= DMAOR_INIT;
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	/* See if we got an error again */
-	if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+	if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
 		printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
 		return -EINVAL;
 	}
@@ -237,10 +235,33 @@ static inline int dmaor_reset(void)
 #if defined(CONFIG_CPU_SH4)
 static irqreturn_t dma_err(int irq, void *dummy)
 {
-	dmaor_reset();
+#if defined(DMAC_IRQ_MULTI)
+	int cnt = 0;
+	switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+	case DMTE6_IRQ:
+		cnt++;
+#endif
+	case DMTE0_IRQ:
+		if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+			disable_irq(irq);
+			/* DMA multi and error IRQ */
+			return IRQ_HANDLED;
+		}
+	default:
+		return IRQ_NONE;
+	}
+#else
+	dmaor_reset(0);
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	dmaor_reset(1);
+#endif
 	disable_irq(irq);
 
 	return IRQ_HANDLED;
+#endif
 }
 #endif
 
@@ -259,24 +280,57 @@ static struct dma_info sh_dmac_info = {
 	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
 };
 
+static unsigned int get_dma_error_irq(int n)
+{
+#if defined(DMAC_IRQ_MULTI)
+	return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6);
+#else
+	return (n == 0) ? DMAE0_IRQ :
+#if defined(DMAE1_IRQ)
+				DMAE1_IRQ;
+#else
+				-1;
+#endif
+#endif
+}
+
 static int __init sh_dmac_init(void)
 {
 	struct dma_info *info = &sh_dmac_info;
 	int i;
 
 #ifdef CONFIG_CPU_SH4
-	i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
-	if (unlikely(i < 0))
-		return i;
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		i = request_irq(get_dma_error_irq(n), dma_err,
+#if defined(DMAC_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
 #endif
+				dmae_name[n], (void *)dmae_name[n]);
+		if (unlikely(i < 0)) {
+			printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+			return i;
+		}
+	}
+#endif /* CONFIG_CPU_SH4 */
 
 	/*
 	 * Initialize DMAOR, and clean up any error flags that may have
 	 * been set.
 	 */
-	i = dmaor_reset();
+	i = dmaor_reset(0);
+	if (unlikely(i != 0))
+		return i;
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	i = dmaor_reset(1);
 	if (unlikely(i != 0))
 		return i;
+#endif
 
 	return register_dmac(info);
 }
@@ -284,8 +338,12 @@ static int __init sh_dmac_init(void)
 static void __exit sh_dmac_exit(void)
 {
 #ifdef CONFIG_CPU_SH4
-	free_irq(DMAE_IRQ, 0);
-#endif
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		free_irq(get_dma_error_irq(n), (void *)dmae_name[n]);
+	}
+#endif /* CONFIG_CPU_SH4 */
 	unregister_dmac(&sh_dmac_info);
 }
 
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
deleted file mode 100644
index 05fecd5428e..00000000000
--- a/arch/sh/drivers/dma/dma-sh.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/sh/drivers/dma/dma-sh.h
- *
- * Copyright (C) 2000  Takashi YOSHII
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __DMA_SH_H
-#define __DMA_SH_H
-
-#include <cpu/dma.h>
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L	0x00000000
-#define REQ_E	0x00080000
-#define RACK_H	0x00000000
-#define RACK_L	0x00040000
-#define ACK_R	0x00000000
-#define ACK_W	0x00020000
-#define ACK_H	0x00000000
-#define ACK_L	0x00010000
-#define DM_INC	0x00004000
-#define DM_DEC	0x00008000
-#define SM_INC	0x00001000
-#define SM_DEC	0x00002000
-#define RS_IN	0x00000200
-#define RS_OUT	0x00000300
-#define TS_BLK	0x00000040
-#define TM_BUR	0x00000020
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
-
-/* DMAOR definitions */
-#define DMAOR_AE	0x00000004
-#define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_32)
-
-#define MAX_DMAC_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
-
-/*
- * Subtypes that have fewer channels than this simply need to change
- * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number
- * of channels should expand on this.
- *
- * For most subtypes we can easily figure these values out with some
- * basic calculation, unfortunately on other subtypes these are more
- * scattered, so we just leave it unrolled for simplicity.
- */
-#define SAR	((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
-				   SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \
-				   SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60})
-#define DAR	((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
-				   SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \
-				   SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64})
-#define DMATCR	((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
-				   SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \
-				   SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68})
-#define CHCR	((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
-				   SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \
-				   SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c})
-
-#define DMAOR	(SH_DMAC_BASE + 0x40)
-
-#endif /* __DMA_SH_H */
-
diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
new file mode 100644
index 00000000000..e873ecaa506
--- /dev/null
+++ b/arch/sh/include/asm/dma-sh.h
@@ -0,0 +1,117 @@
+/*
+ * arch/sh/include/asm/dma-sh.h
+ *
+ * Copyright (C) 2000  Takashi YOSHII
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __DMA_SH_H
+#define __DMA_SH_H
+
+#include <cpu/dma.h>
+
+/* DMAOR contorl: The DMAOR access size is different by CPU.*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define dmaor_read_reg(n) \
+    (n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \
+	: ctrl_inw(SH_DMAC_BASE0 + DMAOR))
+#define dmaor_write_reg(n, data) \
+    (n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \
+    : ctrl_outw(data, SH_DMAC_BASE0 + DMAOR))
+#else /* Other CPU */
+#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR)
+#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)
+#endif
+
+static int dmte_irq_map[] __maybe_unused = {
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 4)
+    DMTE0_IRQ,
+    DMTE0_IRQ + 1,
+    DMTE0_IRQ + 2,
+    DMTE0_IRQ + 3,
+#endif
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 6)
+    DMTE4_IRQ,
+    DMTE4_IRQ + 1,
+#endif
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 8)
+    DMTE6_IRQ,
+    DMTE6_IRQ + 1,
+#endif
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 12)
+    DMTE8_IRQ,
+    DMTE9_IRQ,
+    DMTE10_IRQ,
+    DMTE11_IRQ,
+#endif
+};
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L	0x00000000
+#define REQ_E	0x00080000
+#define RACK_H	0x00000000
+#define RACK_L	0x00040000
+#define ACK_R	0x00000000
+#define ACK_W	0x00020000
+#define ACK_H	0x00000000
+#define ACK_L	0x00010000
+#define DM_INC	0x00004000
+#define DM_DEC	0x00008000
+#define SM_INC	0x00001000
+#define SM_DEC	0x00002000
+#define RS_IN	0x00000200
+#define RS_OUT	0x00000300
+#define TS_BLK	0x00000040
+#define TM_BUR	0x00000020
+#define CHCR_DE 0x00000001
+#define CHCR_TE 0x00000002
+#define CHCR_IE 0x00000004
+
+/* DMAOR definitions */
+#define DMAOR_AE	0x00000004
+#define DMAOR_NMIF	0x00000002
+#define DMAOR_DME	0x00000001
+
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_32)
+
+/* DMA base address */
+static u32 dma_base_addr[] __maybe_unused = {
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 4)
+	SH_DMAC_BASE0 + 0x00,	/* channel 0 */
+	SH_DMAC_BASE0 + 0x10,
+	SH_DMAC_BASE0 + 0x20,
+	SH_DMAC_BASE0 + 0x30,
+#endif
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 6)
+	SH_DMAC_BASE0 + 0x50,
+	SH_DMAC_BASE0 + 0x60,
+#endif
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 8)
+	SH_DMAC_BASE1 + 0x00,
+	SH_DMAC_BASE1 + 0x10,
+#endif
+#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 12)
+	SH_DMAC_BASE1 + 0x20,
+	SH_DMAC_BASE1 + 0x30,
+	SH_DMAC_BASE1 + 0x50,
+	SH_DMAC_BASE1 + 0x60, /* channel 11 */
+#endif
+};
+
+/* DMA register */
+#define SAR     0x00
+#define DAR     0x04
+#define TCR     0x08
+#define CHCR    0x0C
+#define DMAOR	0x40
+
+#endif /* __DMA_SH_H */
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
index beca7128e2a..6bd17847387 100644
--- a/arch/sh/include/asm/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -25,9 +25,9 @@
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
 
 #ifdef CONFIG_NR_DMA_CHANNELS
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
+#  define MAX_DMA_CHANNELS   (CONFIG_NR_DMA_CHANNELS)
 #else
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#  define MAX_DMA_CHANNELS   (CONFIG_NR_ONCHIP_DMA_CHANNELS)
 #endif
 
 /*
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 6813c3220a1..0ea15f3f236 100644
--- a/arch/sh/include/cpu-sh3/cpu/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
@@ -1,22 +1,17 @@
 #ifndef __ASM_CPU_SH3_DMA_H
 #define __ASM_CPU_SH3_DMA_H
 
-
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define SH_DMAC_BASE	0xa4010020
-#else
-#define SH_DMAC_BASE	0xa4000020
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SH_DMAC_BASE0	0xa4010020
+#else /* SH7705/06/07/09 */
+#define SH_DMAC_BASE0	0xa4000020
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
 #define DMTE0_IRQ	48
-#define DMTE1_IRQ	49
-#define DMTE2_IRQ	50
-#define DMTE3_IRQ	51
 #define DMTE4_IRQ	76
-#define DMTE5_IRQ	77
-#endif
 
 /* Definitions for the SuperH DMAC */
 #define TM_BURST	0x00000020
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
new file mode 100644
index 00000000000..0ed5178fed6
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
@@ -0,0 +1,94 @@
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7730)
+#define DMTE0_IRQ	48
+#define DMTE4_IRQ	76
+#define DMAE0_IRQ	78	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#define SH_DMARS_BASE	0xFE009000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7764)
+#define DMTE0_IRQ	34
+#define DMTE4_IRQ	44
+#define DMAE0_IRQ	38
+#define SH_DMAC_BASE0	0xFF608020
+#define SH_DMARS_BASE	0xFF609000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define DMTE0_IRQ	48	/* DMAC0A*/
+#define DMTE4_IRQ	40	/* DMAC0B */
+#define DMTE6_IRQ	42
+#define DMTE8_IRQ	76	/* DMAC1A */
+#define DMTE9_IRQ	77
+#define DMTE10_IRQ	72	/* DMAC1B */
+#define DMTE11_IRQ	73
+#define DMAE0_IRQ	78	/* DMA Error IRQ*/
+#define DMAE1_IRQ	74	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#define SH_DMAC_BASE1	0xFDC08020
+#define SH_DMARS_BASE	0xFDC09000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define DMTE0_IRQ	34
+#define DMTE4_IRQ	44
+#define DMTE6_IRQ	46
+#define DMTE8_IRQ	92
+#define DMTE9_IRQ	93
+#define DMTE10_IRQ	94
+#define DMTE11_IRQ	95
+#define DMAE0_IRQ	38	/* DMA Error IRQ */
+#define SH_DMAC_BASE0	0xFC808020
+#define SH_DMAC_BASE1	0xFC818020
+#define SH_DMARS_BASE	0xFC809000
+#else /* SH7785 */
+#define DMTE0_IRQ	33
+#define DMTE4_IRQ	37
+#define DMTE6_IRQ	52
+#define DMTE8_IRQ	54
+#define DMTE9_IRQ	55
+#define DMTE10_IRQ	56
+#define DMTE11_IRQ	57
+#define DMAE0_IRQ	39	/* DMA Error IRQ0 */
+#define DMAE1_IRQ	58	/* DMA Error IRQ1 */
+#define SH_DMAC_BASE0	0xFC808020
+#define SH_DMAC_BASE1	0xFCC08020
+#define SH_DMARS_BASE	0xFC809000
+#endif
+
+#define REQ_HE	0x000000C0
+#define REQ_H	0x00000080
+#define REQ_LE	0x00000040
+#define TM_BURST 0x0000020
+#define TS_8	0x00000000
+#define TS_16	0x00000008
+#define TS_32	0x00000010
+#define TS_16BLK	0x00000018
+#define TS_32BLK	0x00100000
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_128BIT]	= 4,
+	[XMIT_SZ_256BIT]	= 5,
+};
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
deleted file mode 100644
index 71b426a6e48..00000000000
--- a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
-#define __ASM_SH_CPU_SH4_DMA_SH7780_H
-
-#define REQ_HE	0x000000C0
-#define REQ_H	0x00000080
-#define REQ_LE	0x00000040
-#define TM_BURST 0x0000020
-#define TS_8	0x00000000
-#define TS_16	0x00000008
-#define TS_32	0x00000010
-#define TS_16BLK	0x00000018
-#define TS_32BLK	0x00100000
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_128BIT,
-	XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_128BIT]	= 4,
-	[XMIT_SZ_256BIT]	= 5,
-};
-
-#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
index 235b7cd1fc9..bcb30246e85 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -1,31 +1,29 @@
 #ifndef __ASM_CPU_SH4_DMA_H
 #define __ASM_CPU_SH4_DMA_H
 
-#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
-
 /* SH7751/7760/7780 DMA IRQ sources */
-#define DMTE0_IRQ	34
-#define DMTE1_IRQ	35
-#define DMTE2_IRQ	36
-#define DMTE3_IRQ	37
-#define DMTE4_IRQ	44
-#define DMTE5_IRQ	45
-#define DMTE6_IRQ	46
-#define DMTE7_IRQ	47
-#define DMAE_IRQ	38
 
 #ifdef CONFIG_CPU_SH4A
-#define SH_DMAC_BASE	0xfc808020
 
+#define DMAOR_INIT	(DMAOR_DME)
 #define CHCR_TS_MASK	0x18
 #define CHCR_TS_SHIFT	3
 
-#include <cpu/dma-sh7780.h>
-#else
-#define SH_DMAC_BASE	0xffa00000
+#include <cpu/dma-sh4a.h>
+#else /* CONFIG_CPU_SH4A */
+/*
+ * SH7750/SH7751/SH7760
+ */
+#define DMTE0_IRQ	34
+#define DMTE4_IRQ	44
+#define DMTE6_IRQ	46
+#define DMAE0_IRQ	38
 
+#define DMAOR_INIT	(0x8000|DMAOR_DME)
+#define SH_DMAC_BASE0	0xffa00000
+#define SH_DMAC_BASE1	0xffa00070
 /* Definitions for the SuperH DMAC */
-#define TM_BURST	0x0000080
+#define TM_BURST	0x00000080
 #define TS_8		0x00000010
 #define TS_16		0x00000020
 #define TS_32		0x00000030
-- 
cgit v1.2.3


From fff94cd9f5527bbba13aa5ea5719d16531ca8e65 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 10 Mar 2009 11:48:07 +0000
Subject: [ARM] S3C: Tidy sleep code path to fix call flow

As noted by Russell King, the sleep code path is not
elegant and makes use of leaving items on the stack
between calls.

Change the code that does the following:

        if (s3c_cpu_save(regs_save) == 0) {
                flush_cache_all();
                S3C_PMDBG("preparing to sleep\n");
                pm_cpu_sleep();
        }

to simply call s3c_cpu_save, and let that do the
necessary calls to quiesce and sleep the system.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/pm.h |  8 ++++++++
 arch/arm/plat-s3c/pm.c              | 20 +++++++++++---------
 arch/arm/plat-s3c24xx/sleep.S       | 25 +++++++++----------------
 3 files changed, 28 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 5ee26da2702..3779775133a 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -162,5 +162,13 @@ extern void s3c_pm_restore_gpios(void);
  */
 extern void s3c_pm_save_gpios(void);
 
+/**
+ * s3c_pm_cb_flushcache - callback for assembly code
+ *
+ * Callback to issue flush_cache_all() as this call is
+ * not a directly callable object.
+ */
+extern void s3c_pm_cb_flushcache(void);
+
 extern void s3c_pm_save_core(void);
 extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index a0ca18a75b0..061182ca66e 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -229,7 +229,7 @@ void (*pm_cpu_sleep)(void);
 
 static int s3c_pm_enter(suspend_state_t state)
 {
-	unsigned long regs_save[16];
+	static unsigned long regs_save[16];
 
 	/* ensure the debug is initialised (if enabled) */
 
@@ -289,15 +289,11 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	s3c_pm_arch_stop_clocks();
 
-	/* s3c2410_cpu_save will also act as our return point from when
-	 * we resume as it saves its own register state, so use the return
-	 * code to differentiate return from save and return from sleep */
+	/* s3c_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state and restores it
+	 * during the resume.  */
 
-	if (s3c_cpu_save(regs_save) == 0) {
-		flush_cache_all();
-		S3C_PMDBG("preparing to sleep\n");
-		pm_cpu_sleep();
-	}
+	s3c_cpu_save(regs_save);
 
 	/* restore the cpu state using the kernel's cpu init code. */
 
@@ -325,6 +321,12 @@ static int s3c_pm_enter(suspend_state_t state)
 	return 0;
 }
 
+/* callback from assembly code */
+void s3c_pm_cb_flushcache(void)
+{
+	flush_cache_all();
+}
+
 static int s3c_pm_prepare(void)
 {
 	/* prepare check area if configured */
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index ecb830be67d..e73e3b6e88d 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -42,21 +42,9 @@
 	.text
 
 	/* s3c_cpu_save
-	 *
-	 * save enough of the CPU state to allow us to re-start
-	 * pm.c code. as we store items like the sp/lr, we will
-	 * end up returning from this function when the cpu resumes
-	 * so the return value is set to mark this.
-	 *
-	 * This arangement means we avoid having to flush the cache
-	 * from this code.
 	 *
 	 * entry:
-	 *	r0 = pointer to save block
-	 *
-	 * exit:
-	 *	r0 = 0 => we stored everything
-	 *	     1 => resumed from sleep
+	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
 	*/
 
 ENTRY(s3c_cpu_save)
@@ -71,14 +59,19 @@ ENTRY(s3c_cpu_save)
 
 	stmia	r0, { r4 - r13 }
 
-	mov	r0, #0
-	ldmfd	sp, { r4 - r12, pc }
+	@@ write our state back to RAM
+	bl	s3c_pm_cb_flushcache
 
+	@@ jump to final code to send system to sleep
+	ldr	r0, =pm_cpu_sleep
+	@@ldr	pc, [ r0 ]
+	ldr	r0, [ r0 ]
+	mov	pc, r0
+	
 	@@ return to the caller, after having the MMU
 	@@ turned on, this restores the last bits from the
 	@@ stack
 resume_with_mmu:
-	mov	r0, #1
 	ldmfd	sp!, { r4 - r12, pc }
 
 	.ltorg
-- 
cgit v1.2.3


From 5b3d515fcfe93d012107b9bd4895e2d913cbe8c3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:38 +0000
Subject: [ARM] S3C64XX: Add modem registers and a virtual map

Add the modem registers and a virtual mapping for the
modem block. This is is required as there are registers
that control the LCD block that need to be saved over
suspend as well as interrupt controls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h        |  3 +++
 arch/arm/plat-s3c64xx/cpu.c                     |  5 ++++
 arch/arm/plat-s3c64xx/include/plat/regs-modem.h | 31 +++++++++++++++++++++++++
 3 files changed, 39 insertions(+)
 create mode 100644 arch/arm/plat-s3c64xx/include/plat/regs-modem.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index cff27d813fc..baf1c0f1ea5 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -52,6 +52,9 @@
 #define S3C64XX_PA_VIC0		(0x71200000)
 #define S3C64XX_PA_VIC1		(0x71300000)
 
+#define S3C64XX_PA_MODEM	(0x74108000)
+#define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index fbde183a456..91f49a3a665 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -96,6 +96,11 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
new file mode 100644
index 00000000000..49f7759dedf
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
@@ -0,0 +1,31 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - modem block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_MODEM_H
+#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+
+#define S3C64XX_MODEMREG(x)	(S3C64XX_VA_MODEM + (x))
+
+#define S3C64XX_MODEM_INT2AP			S3C64XX_MODEMREG(0x0)
+#define S3C64XX_MODEM_INT2MODEM			S3C64XX_MODEMREG(0x4)
+#define S3C64XX_MODEM_MIFCON			S3C64XX_MODEMREG(0x8)
+#define S3C64XX_MODEM_MIFPCON			S3C64XX_MODEMREG(0xC)
+#define S3C64XX_MODEM_INTCLR			S3C64XX_MODEMREG(0x10)
+#define S3C64XX_MODEM_DMA_TXADDR		S3C64XX_MODEMREG(0x14)
+#define S3C64XX_MODEM_DMA_RXADDR		S3C64XX_MODEMREG(0x18)
+
+#define MIFPCON_INT2M_LEVEL			(1 << 4)
+#define MIFPCON_LCD_BYPASS			(1 << 3)
+
+#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
-- 
cgit v1.2.3


From 333053733f52fa8c8e44c621b7b17fe5df215d4a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:15 +0000
Subject: [ARM] S3C64XX: Add EINT group regs and move IRQ_EINT to regs-gpio.h

Add definitions for the EINT group registers and move the EINT IRQ
register definitions out of arch/arm/plat-s3c64xx/irq-eint.c so that
they are available for re-use with PM and the other code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/regs-gpio.h | 78 ++++++++++++++++++++------
 arch/arm/plat-s3c64xx/irq-eint.c               | 14 -----
 2 files changed, 61 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
index 75b873d8280..51a84cd6320 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
@@ -13,23 +13,67 @@
 
 /* Base addresses for each of the banks */
 
-#define S3C64XX_GPA_BASE	(S3C64XX_VA_GPIO + 0x0000)
-#define S3C64XX_GPB_BASE	(S3C64XX_VA_GPIO + 0x0020)
-#define S3C64XX_GPC_BASE	(S3C64XX_VA_GPIO + 0x0040)
-#define S3C64XX_GPD_BASE	(S3C64XX_VA_GPIO + 0x0060)
-#define S3C64XX_GPE_BASE	(S3C64XX_VA_GPIO + 0x0080)
-#define S3C64XX_GPF_BASE	(S3C64XX_VA_GPIO + 0x00A0)
-#define S3C64XX_GPG_BASE	(S3C64XX_VA_GPIO + 0x00C0)
-#define S3C64XX_GPH_BASE	(S3C64XX_VA_GPIO + 0x00E0)
-#define S3C64XX_GPI_BASE	(S3C64XX_VA_GPIO + 0x0100)
-#define S3C64XX_GPJ_BASE	(S3C64XX_VA_GPIO + 0x0120)
-#define S3C64XX_GPK_BASE	(S3C64XX_VA_GPIO + 0x0800)
-#define S3C64XX_GPL_BASE	(S3C64XX_VA_GPIO + 0x0810)
-#define S3C64XX_GPM_BASE	(S3C64XX_VA_GPIO + 0x0820)
-#define S3C64XX_GPN_BASE	(S3C64XX_VA_GPIO + 0x0830)
-#define S3C64XX_GPO_BASE	(S3C64XX_VA_GPIO + 0x0140)
-#define S3C64XX_GPP_BASE	(S3C64XX_VA_GPIO + 0x0160)
-#define S3C64XX_GPQ_BASE	(S3C64XX_VA_GPIO + 0x0180)
+#define S3C64XX_GPIOREG(reg)	(S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE	S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE	S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE	S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE	S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE	S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE	S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE	S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE	S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE	S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE	S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE	S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE	S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE	S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE	S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE	S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON	S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON	S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON	S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON	S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON	S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON	S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON	S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON	S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON	S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK	S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK	S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK	S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK	S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK	S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND	S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND	S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND	S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND	S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND	S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY	S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x)	(1 << (x))
+
+#define S3C64XX_SERVICE		S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND	S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
 
 #endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index cf524826c93..47e5155bb13 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -27,20 +27,6 @@
 #include <mach/map.h>
 #include <plat/cpu.h>
 
-/* GPIO is 0x7F008xxx, */
-#define S3C64XX_GPIOREG(x)	(S3C64XX_VA_GPIO + (x))
-
-#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
-#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
-#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
-#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
-#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
-#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
-
-#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
-#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
-
-
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
 
-- 
cgit v1.2.3


From e383707131910337afadfc202c58a70361a9ea7c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:17 +0000
Subject: [ARM] S3C64XX: Add GPIO SPCONSLP and SLPEN register definitions

Add GPIO register definitions for SPCONSLP and SLPEN
for controlling the state of the pins over sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/regs-gpio.h | 27 ++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
index 51a84cd6320..d45d66b8c2f 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
@@ -33,6 +33,10 @@
 #define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
 #define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
 
+/* SPCON */
+
+#define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
+
 /* External interrupt registers */
 
 #define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
@@ -75,5 +79,28 @@
 #define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
 #define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
 
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP	S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN	(1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT	(1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK	(0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0	(0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1	(0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ	(0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK	(0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0	(0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1	(0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP	(0x2 << 0)
+
+
+#define S3C64XX_SLPEN		S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP		(1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN	(1 << 1)
+
 #endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
 
-- 
cgit v1.2.3


From 2454e524bcfd8b2fefa28af0f33bfcd376ecdfcb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:39 +0000
Subject: [ARM] S3C64XX: Add S3C64XX_SPCON register bit definitions

Add the definitions for the SPCON register in the
GPIO block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/regs-gpio.h | 81 ++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
index d45d66b8c2f..81f7f6e6832 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
@@ -37,6 +37,87 @@
 
 #define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
 
+#define S3C64XX_SPCON_DRVCON_CAM_MASK		(0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT		(30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA		(0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA		(0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA		(0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA		(0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK		(0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT	(28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA		(0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA		(0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA		(0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA		(0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK		(0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT	(26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA		(0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA		(0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA		(0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA		(0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK		(0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT		(24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA		(0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA		(0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA		(0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA		(0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK		(0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT	(22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA		(0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA		(0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA		(0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA		(0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN		(1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK	(0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT	(18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA	(0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA	(0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA	(0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA	(0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK		(0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT	(16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED	(0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN		(0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP		(0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK		(0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT		(14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED	(0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN		(0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP		(0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK		(0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT		(12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED	(0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN		(0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP		(0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK		(0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT		(8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED	(0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN		(0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP		(0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD			(1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD			(1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2		(1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1		(1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND		(1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK		(0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT		(0)
+#define S3C64XX_SPCON_LCD_SEL_HOST		(0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB		(0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656		(0x2 << 0)
+
+
 /* External interrupt registers */
 
 #define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
-- 
cgit v1.2.3


From 2ae0b117a62c46c233c421e94fd4692ad562d1c7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:02 +0000
Subject: [ARM] S3C64XX: SYSCON power and sleep control register defines

Add the register defines for the sleep and power control
functions in the S3C64XX SYSCON register block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 .../plat-s3c64xx/include/plat/regs-syscon-power.h  | 116 +++++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
new file mode 100644
index 00000000000..270d96ac970
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
@@ -0,0 +1,116 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - syscon power and sleep control registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
+#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+
+#define S3C64XX_PWR_CFG				S3C_SYSREG(0x804)
+
+#define S3C64XX_PWRCFG_OSC_OTG_DISABLE		(1 << 17)
+#define S3C64XX_PWRCFG_MMC2_DISABLE		(1 << 16)
+#define S3C64XX_PWRCFG_MMC1_DISABLE		(1 << 15)
+#define S3C64XX_PWRCFG_MMC0_DISABLE		(1 << 14)
+#define S3C64XX_PWRCFG_HSI_DISABLE		(1 << 13)
+#define S3C64XX_PWRCFG_TS_DISABLE		(1 << 12)
+#define S3C64XX_PWRCFG_RTC_TICK_DISABLE		(1 << 11)
+#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE	(1 << 10)
+#define S3C64XX_PWRCFG_MSM_DISABLE		(1 << 9)
+#define S3C64XX_PWRCFG_KEY_DISABLE		(1 << 8)
+#define S3C64XX_PWRCFG_BATF_DISABLE		(1 << 7)
+
+#define S3C64XX_PWRCFG_CFG_WFI_MASK		(0x3 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SHIFT		(5)
+#define S3C64XX_PWRCFG_CFG_WFI_IGNORE		(0x0 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_IDLE		(0x1 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_STOP		(0x2 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SLEEP		(0x3 << 5)
+
+#define S3C64XX_PWRCFG_CFG_BATFLT_MASK		(0x3 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT		(3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE	(0x0 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ		(0x1 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP		(0x3 << 3)
+
+#define S3C64XX_PWRCFG_CFG_BAT_WAKE		(1 << 2)
+#define S3C64XX_PWRCFG_OSC27_EN			(1 << 0)
+
+#define S3C64XX_EINT_MASK			S3C_SYSREG(0x808)
+
+#define S3C64XX_NORMAL_CFG			S3C_SYSREG(0x810)
+
+#define S3C64XX_NORMALCFG_IROM_ON		(1 << 30)
+#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON		(1 << 16)
+#define S3C64XX_NORMALCFG_DOMAIN_S_ON		(1 << 15)
+#define S3C64XX_NORMALCFG_DOMAIN_F_ON		(1 << 14)
+#define S3C64XX_NORMALCFG_DOMAIN_P_ON		(1 << 13)
+#define S3C64XX_NORMALCFG_DOMAIN_I_ON		(1 << 12)
+#define S3C64XX_NORMALCFG_DOMAIN_G_ON		(1 << 10)
+#define S3C64XX_NORMALCFG_DOMAIN_V_ON		(1 << 9)
+
+#define S3C64XX_STOP_CFG			S3C_SYSREG(0x814)
+
+#define S3C64XX_STOPCFG_MEMORY_ARM_ON		(1 << 29)
+#define S3C64XX_STOPCFG_TOP_MEMORY_ON		(1 << 20)
+#define S3C64XX_STOPCFG_ARM_LOGIC_ON		(1 << 17)
+#define S3C64XX_STOPCFG_TOP_LOGIC_ON		(1 << 8)
+#define S3C64XX_STOPCFG_OSC_EN			(1 << 0)
+
+#define S3C64XX_SLEEP_CFG			S3C_SYSREG(0x818)
+
+#define S3C64XX_SLEEPCFG_OSC_EN			(1 << 0)
+
+#define S3C64XX_STOP_MEM_CFG			S3C_SYSREG(0x81c)
+
+#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN	(1 << 6)
+#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN	(1 << 5)
+#define S3C64XX_STOPMEMCFG_OTG_RETAIN		(1 << 4)
+#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN		(1 << 3)
+#define S3C64XX_STOPMEMCFG_IROM_RETAIN		(1 << 2)
+#define S3C64XX_STOPMEMCFG_IRDA_RETAIN		(1 << 1)
+#define S3C64XX_STOPMEMCFG_NFCON_RETAIN		(1 << 0)
+
+#define S3C64XX_OSC_STABLE			S3C_SYSREG(0x824)
+#define S3C64XX_PWR_STABLE			S3C_SYSREG(0x828)
+
+#define S3C64XX_WAKEUP_STAT			S3C_SYSREG(0x908)
+
+#define S3C64XX_WAKEUPSTAT_MMC2			(1 << 11)
+#define S3C64XX_WAKEUPSTAT_MMC1			(1 << 10)
+#define S3C64XX_WAKEUPSTAT_MMC0			(1 << 9)
+#define S3C64XX_WAKEUPSTAT_HSI			(1 << 8)
+#define S3C64XX_WAKEUPSTAT_BATFLT		(1 << 6)
+#define S3C64XX_WAKEUPSTAT_MSM			(1 << 5)
+#define S3C64XX_WAKEUPSTAT_KEY			(1 << 4)
+#define S3C64XX_WAKEUPSTAT_TS			(1 << 3)
+#define S3C64XX_WAKEUPSTAT_RTC_TICK		(1 << 2)
+#define S3C64XX_WAKEUPSTAT_RTC_ALARM		(1 << 1)
+#define S3C64XX_WAKEUPSTAT_EINT			(1 << 0)
+
+#define S3C64XX_BLK_PWR_STAT			S3C_SYSREG(0x90c)
+
+#define S3C64XX_BLKPWRSTAT_G			(1 << 7)
+#define S3C64XX_BLKPWRSTAT_ETM			(1 << 6)
+#define S3C64XX_BLKPWRSTAT_S			(1 << 5)
+#define S3C64XX_BLKPWRSTAT_F			(1 << 4)
+#define S3C64XX_BLKPWRSTAT_P			(1 << 3)
+#define S3C64XX_BLKPWRSTAT_I			(1 << 2)
+#define S3C64XX_BLKPWRSTAT_V			(1 << 1)
+#define S3C64XX_BLKPWRSTAT_TOP			(1 << 0)
+
+#define S3C64XX_INFORM0				S3C_SYSREG(0xA00)
+#define S3C64XX_INFORM1				S3C_SYSREG(0xA04)
+#define S3C64XX_INFORM2				S3C_SYSREG(0xA08)
+#define S3C64XX_INFORM3				S3C_SYSREG(0xA0C)
+
+#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
-- 
cgit v1.2.3


From 36d543a3b56dc7cddb63f5734e13db16066933a4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:04 +0000
Subject: [ARM] S3C64XX: Add definitions for the GPIO memory port
 configurations

Add defines for the registers that control the GPIO pins that are
run the memory interface.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 .../plat-s3c64xx/include/plat/regs-gpio-memport.h  | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
new file mode 100644
index 00000000000..82342f6fd27
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO memory port register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+
+#define S3C64XX_MEM0CONSTOP	S3C64XX_GPIOREG(0x1B0)
+#define S3C64XX_MEM1CONSTOP	S3C64XX_GPIOREG(0x1B4)
+
+#define S3C64XX_MEM0CONSLP0	S3C64XX_GPIOREG(0x1C0)
+#define S3C64XX_MEM0CONSLP1	S3C64XX_GPIOREG(0x1C4)
+#define S3C64XX_MEM1CONSLP	S3C64XX_GPIOREG(0x1C8)
+
+#define S3C64XX_MEM0DRVCON	S3C64XX_GPIOREG(0x1D0)
+#define S3C64XX_MEM1DRVCON	S3C64XX_GPIOREG(0x1D4)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+
-- 
cgit v1.2.3


From 1288b670e6cb3745392de617f223672396f98d73 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 12 Dec 2008 00:24:16 +0000
Subject: [ARM] S3C64XX: add AHB_CON and SPCON register address definitions

Add the address definitions for S3C64XX_AHB_CONx and
SPCON registers for use in the PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/regs-sys.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
index d8ed8291709..69b78d9f83b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
@@ -17,6 +17,10 @@
 
 #define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
 
+#define S3C64XX_AHB_CON0	S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
+
 #define S3C64XX_OTHERS		S3C_SYSREG(0x900)
 
 #define S3C64XX_OTHERS_USBMASK	(1 << 16)
-- 
cgit v1.2.3


From f24ade3a3332811a512ed3b6c6aa69486719b1d8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 10 Mar 2009 19:02:30 +0100
Subject: x86, sched_clock(): mark variables read-mostly

Impact: micro-optimization

There's a number of variables in the sched_clock() path that are
in .data/.bss - but not marked __read_mostly. This creates the
danger of accidental false cacheline sharing with some other,
write-often variable.

So mark them __read_mostly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tsc.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 599e5816863..9c8b71531ca 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -17,20 +17,21 @@
 #include <asm/delay.h>
 #include <asm/hypervisor.h>
 
-unsigned int cpu_khz;           /* TSC clocks / usec, not used here */
+unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
-unsigned int tsc_khz;
+
+unsigned int __read_mostly tsc_khz;
 EXPORT_SYMBOL(tsc_khz);
 
 /*
  * TSC can be unstable due to cpufreq or due to unsynced TSCs
  */
-static int tsc_unstable;
+static int __read_mostly tsc_unstable;
 
 /* native_sched_clock() is called before tsc_init(), so
    we must start with the TSC soft disabled to prevent
    erroneous rdtsc usage on !cpu_has_tsc processors */
-static int tsc_disabled = -1;
+static int __read_mostly tsc_disabled = -1;
 
 static int tsc_clocksource_reliable;
 /*
-- 
cgit v1.2.3


From ace14b82633960a2b6bf6a0b2640c63872a65562 Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Tue, 10 Mar 2009 08:59:58 +0100
Subject: [ARM] Orion: Fix some typos in the DNS-323 support code

Fix some typos in the DNS-323 support code.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/dns323-setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 0722d6510df..b31ca4cef36 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -76,7 +76,7 @@ static int __init dns323_dev_id(void)
 
 static int __init dns323_pci_init(void)
 {
-	/* The 5182 doesn't really use it's PCI bus, and initialising PCI
+	/* The 5182 doesn't really use its PCI bus, and initialising PCI
 	 * gets in the way of initialising the SATA controller.
 	 */
 	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
@@ -418,7 +418,7 @@ static void __init dns323_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	/* The 5182 has it's SATA controller on-chip, and needs it's own little
+	/* The 5182 has its SATA controller on-chip, and needs its own little
 	 * init routine.
 	 */
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
-- 
cgit v1.2.3


From f455dfb106916d855d59686fe16575c2ceb2cb2a Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 10 Mar 2009 19:51:07 +0000
Subject: ASoC: Fix up merge with the ARM tree

The same change has been made with the final lines in slightly differnet
orders.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-shark/include/mach/io.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index 8ca7d7f09bd..568daea93fb 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -15,6 +15,7 @@
 #define IO_SPACE_LIMIT	0xffffffff
 
 #define __io(a)		__typesafe_io(PCIO_BASE + (a))
+
 #define __mem_pci(addr)	(addr)
 
 #endif
-- 
cgit v1.2.3


From d680c76eccd9222031ee30dcee5fdedba2467610 Mon Sep 17 00:00:00 2001
From: Francesco VIRLINZI <francesco.virlinzi@st.com>
Date: Wed, 11 Mar 2009 07:40:54 +0000
Subject: sh: clkfwk: add clk_set_parent/clk_get_parent

This patch adds the clk_set_parent/clk_get_parent routines to the sh
clock framework.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/clock.h |  1 +
 arch/sh/kernel/cpu/clock.c  | 29 +++++++++++++++++++++++++++++
 2 files changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
index f9c88583d90..2f6c9627bc1 100644
--- a/arch/sh/include/asm/clock.h
+++ b/arch/sh/include/asm/clock.h
@@ -15,6 +15,7 @@ struct clk_ops {
 	void (*disable)(struct clk *clk);
 	void (*recalc)(struct clk *clk);
 	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	int (*set_parent)(struct clk *clk, struct clk *parent);
 	long (*round_rate)(struct clk *clk, unsigned long rate);
 };
 
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 7b17137536d..332a1798547 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -239,6 +239,35 @@ void clk_recalc_rate(struct clk *clk)
 }
 EXPORT_SYMBOL_GPL(clk_recalc_rate);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+	struct clk *old;
+
+	if (!parent || !clk)
+		return ret;
+
+	old = clk->parent;
+	if (likely(clk->ops && clk->ops->set_parent)) {
+		unsigned long flags;
+		spin_lock_irqsave(&clock_lock, flags);
+		ret = clk->ops->set_parent(clk, parent);
+		spin_unlock_irqrestore(&clock_lock, flags);
+		clk->parent = (ret ? old : parent);
+	}
+
+	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+		propagate_rate(clk);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL_GPL(clk_get_parent);
+
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	if (likely(clk->ops && clk->ops->round_rate)) {
-- 
cgit v1.2.3


From 4a55026fd7a08074676e87932578ff9e327e82a3 Mon Sep 17 00:00:00 2001
From: Francesco VIRLINZI <francesco.virlinzi@st.com>
Date: Wed, 11 Mar 2009 07:42:05 +0000
Subject: sh: clkfwk: Add resume from hibernation support.

This patch adds PM support to the clock framework.
With this, resume from hibernation is properly supported.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/clock.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 332a1798547..3209a8740fa 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -20,6 +20,8 @@
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/kref.h>
+#include <linux/kobject.h>
+#include <linux/sysdev.h>
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -358,6 +360,68 @@ static int show_clocks(char *buf, char **start, off_t off,
 	return p - buf;
 }
 
+#ifdef CONFIG_PM
+static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
+{
+	static pm_message_t prev_state;
+	struct clk *clkp;
+
+	switch (state.event) {
+	case PM_EVENT_ON:
+		/* Resumeing from hibernation */
+		if (prev_state.event == PM_EVENT_FREEZE) {
+			list_for_each_entry(clkp, &clock_list, node)
+				if (likely(clkp->ops)) {
+					if (likely(clkp->ops->set_parent))
+						clkp->ops->set_parent(clkp,
+							clkp->parent);
+					if (likely(clkp->ops->set_rate))
+						clkp->ops->set_rate(clkp,
+							clkp->rate, NO_CHANGE);
+					else if (likely(clkp->ops->recalc))
+						clkp->ops->recalc(clkp);
+					}
+		}
+		break;
+	case PM_EVENT_FREEZE:
+		break;
+	case PM_EVENT_SUSPEND:
+		break;
+	}
+
+	prev_state = state;
+	return 0;
+}
+
+static int clks_sysdev_resume(struct sys_device *dev)
+{
+	return clks_sysdev_suspend(dev, PMSG_ON);
+}
+
+static struct sysdev_class clks_sysdev_class = {
+	.name = "clks",
+};
+
+static struct sysdev_driver clks_sysdev_driver = {
+	.suspend = clks_sysdev_suspend,
+	.resume = clks_sysdev_resume,
+};
+
+static struct sys_device clks_sysdev_dev = {
+	.cls = &clks_sysdev_class,
+};
+
+static int __init clk_sysdev_init(void)
+{
+	sysdev_class_register(&clks_sysdev_class);
+	sysdev_driver_register(&clks_sysdev_class, &clks_sysdev_driver);
+	sysdev_register(&clks_sysdev_dev);
+
+	return 0;
+}
+subsys_initcall(clk_sysdev_init);
+#endif
+
 int __init clk_init(void)
 {
 	int i, ret = 0;
-- 
cgit v1.2.3


From 600fa578a95f65bc1f2a03210d3d418747024b43 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 11 Mar 2009 08:14:26 +0000
Subject: sh: improve sh7785lcr power off code

Improve the sh7785lcr power off implementation to
never return. It takes some time before the board
is actually powered off, just hang after asking
the harware to power down.

This removes the serial port garbage printout.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7785lcr.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 6746a5fba3a..94c0296bc35 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -284,6 +284,9 @@ static void sh7785lcr_power_off(void)
 	}
 	*p = 0x01;
 	iounmap(p);
+	set_bl_bit();
+	while (1)
+		cpu_relax();
 }
 
 /* Initialize the board */
-- 
cgit v1.2.3


From a2b03461cb072eb6097a55ec0289294b09382284 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 11 Mar 2009 11:02:33 +0000
Subject: [ARM] Revert extraneous changes from the S3C audio header move

These changes were included in the S3C audio header move but are not
directly related to it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c2410/include/mach/hardware.h | 3 +++
 arch/arm/mach-shark/include/mach/io.h         | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index db72beb61d7..74d5a1a4024 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -131,4 +131,7 @@ extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
 
 /* machine specific hardware definitions should go after this */
 
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index 8ca7d7f09bd..c5cee829fc8 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -14,7 +14,7 @@
 #define PCIO_BASE	0xe0000000
 #define IO_SPACE_LIMIT	0xffffffff
 
-#define __io(a)		__typesafe_io(PCIO_BASE + (a))
+#define __io(a)		((void __iomem *)(PCIO_BASE + (a)))
 #define __mem_pci(addr)	(addr)
 
 #endif
-- 
cgit v1.2.3


From 603b6fd5b8d313a109d3739d8706ee51962ff402 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 11 Mar 2009 18:28:24 +0000
Subject: [ARM] Revert futher extraneous changes from the S3C header move

Can't see any immediate need for these; build tested.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c2410/include/mach/io.h | 2 +-
 arch/arm/plat-s3c24xx/clock-dclk.c      | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
index c477771c092..9813dbf2ae4 100644
--- a/arch/arm/mach-s3c2410/include/mach/io.h
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/map.h>
+#include <mach/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 35219dcf9f0..5b75a797b5a 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -18,7 +18,6 @@
 
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/hardware.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
-- 
cgit v1.2.3


From e4707dd3e9d0cb57597b6568a5e51fea5d6fca41 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 12 Mar 2009 20:11:43 +0100
Subject: [ARM] 5422/1: ARM: MMU: add a Non-cacheable Normal executable memory
 type

This patch adds a Non-cacheable Normal ARM executable memory type,
MT_MEMORY_NONCACHED.

On OMAP3, this is used for rapid dynamic voltage/frequency scaling in
the VDD2 voltage domain. OMAP3's SDRAM controller (SDRC) is in the
VDD2 voltage domain, and its clock frequency must change along with
voltage. The SDRC clock change code cannot run from SDRAM itself,
since SDRAM accesses are paused during the clock change. So the
current implementation of the DVFS code executes from OMAP on-chip
SRAM, aka "OCM RAM."

If the OCM RAM pages are marked as Cacheable, the ARM cache controller
will attempt to flush dirty cache lines to the SDRC, so it can fill
those lines with OCM RAM instruction code. The problem is that the
SDRC is paused during DVFS, and so any SDRAM access causes the ARM MPU
subsystem to hang.

TI's original solution to this problem was to mark the OCM RAM
sections as Strongly Ordered memory, thus preventing caching. This is
overkill: since the memory is marked as non-bufferable, OCM RAM writes
become needlessly slow. The idea of "Strongly Ordered SRAM" is also
conceptually disturbing. Previous LAKML list discussion is here:

http://www.spinics.net/lists/arm-kernel/msg54312.html

This memory type MT_MEMORY_NONCACHED is used for OCM RAM by a future
patch.

Cc: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/map.h |  1 +
 arch/arm/mm/mmu.c               | 23 +++++++++++++++++++++++
 2 files changed, 24 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 39d949b63e8..58cf91f38e6 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -26,6 +26,7 @@ struct map_desc {
 #define MT_HIGH_VECTORS		8
 #define MT_MEMORY		9
 #define MT_ROM			10
+#define MT_MEMORY_NONCACHED	11
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9b36c5cb5e9..aa424e1da8a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -243,6 +243,10 @@ static struct mem_type mem_types[] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_NONCACHED] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+		.domain    = DOMAIN_KERNEL,
+	},
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
@@ -406,9 +410,28 @@ static void __init build_mem_type_table(void)
 		kern_pgprot |= L_PTE_SHARED;
 		vecs_pgprot |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 #endif
 	}
 
+	/*
+	 * Non-cacheable Normal - intended for memory areas that must
+	 * not cause dirty cache line writebacks when used
+	 */
+	if (cpu_arch >= CPU_ARCH_ARMv6) {
+		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+			/* Non-cacheable Normal is XCB = 001 */
+			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+				PMD_SECT_BUFFERED;
+		} else {
+			/* For both ARMv6 and non-TEX-remapping ARMv7 */
+			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+				PMD_SECT_TEX(1);
+		}
+	} else {
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
 		protection_map[i] = __pgprot(v | user_pgprot);
-- 
cgit v1.2.3


From 53f5649b21a7c7b894d68ac4848eb01136fa64aa Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 13 Mar 2009 10:50:17 +0800
Subject: [ARM] pxa: fix typo in BANK_OFF() macro in gpio.h

The typo was originally fixed by Mike Rapoport and missed. And is
later reported by Matthias Meier.

Signed-off-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/gpio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 406fa102cb4..c72c89a2285 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -30,7 +30,7 @@
 
 #define GPIO_REGS_VIRT	io_p2v(0x40E00000)
 
-#define BANK_OFF(n)	(((n) > 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 /* GPIO Pin Level Registers */
-- 
cgit v1.2.3


From aac429707df233e9dc7ed70ea04cd29d832dfe61 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 16 Feb 2009 20:40:55 +0300
Subject: [ARM] pxa: add initial support for Cogent CSB726 board

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig                   |   8 +
 arch/arm/mach-pxa/Makefile                  |   1 +
 arch/arm/mach-pxa/csb726.c                  | 318 ++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/csb726.h     |  26 +++
 arch/arm/mach-pxa/include/mach/uncompress.h |   3 +-
 5 files changed, 355 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-pxa/csb726.c
 create mode 100644 arch/arm/mach-pxa/include/mach/csb726.h

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 33214c1e060..ff1872db5b3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -393,6 +393,14 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
 config PXA_EZX
 	bool "Motorola EZX Platform"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 361fcfa7531..96a72f02c13 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
new file mode 100644
index 00000000000..2b289f83a61
--- /dev/null
+++ b/arch/arm/mach-pxa/csb726.c
@@ -0,0 +1,318 @@
+/*
+ *  Support for Cogent CSB726
+ *
+ *  Copyright (c) 2008 Dmitry Eremin-Solenikov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sm501.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/csb726.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
+ * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
+ * XXX: 21,
+ * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
+ * XXX: 33 CS_5 for LAN9215 on R1
+ */
+
+static unsigned long csb726_pin_config[] = {
+	GPIO78_nCS_2, /* EXP_CS */
+	GPIO79_nCS_3, /* SMSC9215 */
+	GPIO80_nCS_4, /* SM501 */
+
+	GPIO52_GPIO, /* #SMSC9251 int */
+	GPIO53_GPIO, /* SM501 int */
+
+	GPIO1_GPIO, /* GPIO0 */
+	GPIO11_GPIO, /* GPIO1 */
+	GPIO9_GPIO, /* GPIO2 */
+	GPIO10_GPIO, /* GPIO3 */
+	GPIO16_PWM0_OUT, /* or GPIO4 */
+	GPIO17_PWM1_OUT, /* or GPIO5 */
+	GPIO94_GPIO, /* GPIO6 */
+	GPIO95_GPIO, /* GPIO7 */
+	GPIO96_GPIO, /* GPIO8 */
+	GPIO97_GPIO, /* GPIO9 */
+	GPIO15_GPIO, /* EXP_IRQ */
+	GPIO18_RDY, /* EXP_WAIT */
+
+	GPIO0_GPIO, /* PWR_INT */
+	GPIO104_GPIO, /* PWR_OFF */
+
+	GPIO12_GPIO, /* touch irq */
+
+	GPIO13_SSP2_TXD,
+	GPIO14_SSP2_SFRM,
+	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
+	GPIO22_SSP2_SCLK,
+
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+	GPIO83_SSP3_SFRM,
+	GPIO84_SSP3_SCLK,
+
+	GPIO20_GPIO, /* SDIO int */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO100_GPIO, /* SD CD */
+	GPIO101_GPIO, /* SD WP */
+
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16, /* maybe unused */
+	GPIO85_nPCE_1,
+	GPIO98_GPIO, /* CF IRQ */
+	GPIO99_GPIO, /* CF CD */
+	GPIO103_GPIO, /* Reset */
+
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
+static struct pxamci_platform_data csb726_mci_data;
+
+static int csb726_mci_init(struct device *dev,
+		irq_handler_t detect, void *data)
+{
+	int err;
+
+	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
+
+	err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
+	if (err)
+		goto err_det_req;
+
+	err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
+	if (err)
+		goto err_det_dir;
+
+	err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
+	if (err)
+		goto err_ro_req;
+
+	err = gpio_direction_input(CSB726_GPIO_MMC_RO);
+	if (err)
+		goto err_ro_dir;
+
+	err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
+			IRQF_DISABLED, "MMC card detect", data);
+	if (err)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+err_ro_dir:
+	gpio_free(CSB726_GPIO_MMC_RO);
+err_ro_req:
+err_det_dir:
+	gpio_free(CSB726_GPIO_MMC_DETECT);
+err_det_req:
+	return err;
+}
+
+static int csb726_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(CSB726_GPIO_MMC_RO);
+}
+
+static void csb726_mci_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
+	gpio_free(CSB726_GPIO_MMC_RO);
+	gpio_free(CSB726_GPIO_MMC_DETECT);
+}
+
+static struct pxamci_platform_data csb726_mci = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init		= csb726_mci_init,
+	.get_ro		= csb726_mci_get_ro,
+	/* FIXME setpower */
+	.exit		= csb726_mci_exit,
+};
+
+static struct pxaohci_platform_data csb726_ohci_platform_data = {
+	.port_mode	= PMM_NPS_MODE,
+	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
+};
+
+static struct mtd_partition csb726_flash_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0,
+		.size		= CSB726_FLASH_uMON,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "root",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data csb726_flash_data = {
+	.width		= 2,
+	.parts		= csb726_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
+};
+
+static struct resource csb726_flash_resources[] = {
+	{
+		.start          = PXA_CS0_PHYS,
+		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
+		.flags          = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb726_flash = {
+	.name           = "physmap-flash",
+	.dev            = {
+		.platform_data  = &csb726_flash_data,
+	},
+	.resource       = csb726_flash_resources,
+	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
+};
+
+static struct resource csb726_sm501_resources[] = {
+	{
+		.start          = PXA_CS4_PHYS,
+		.end            = PXA_CS4_PHYS + SZ_8M - 1,
+		.flags          = IORESOURCE_MEM,
+		.name		= "sm501-localmem",
+	},
+	{
+		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
+		.end            = PXA_CS4_PHYS + SZ_64M - 1,
+		.flags          = IORESOURCE_MEM,
+		.name		= "sm501-regs",
+	},
+	{
+		.start		= CSB726_IRQ_SM501,
+		.end		= CSB726_IRQ_SM501,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct sm501_initdata csb726_sm501_initdata = {
+/*	.devices	= SM501_USE_USB_HOST, */
+	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
+};
+
+static struct sm501_platdata csb726_sm501_platdata = {
+	.init		= &csb726_sm501_initdata,
+};
+
+static struct platform_device csb726_sm501 = {
+	.name		= "sm501",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
+	.resource	= csb726_sm501_resources,
+	.dev		= {
+		.platform_data = &csb726_sm501_platdata,
+	},
+};
+
+static struct resource csb726_lan_resources[] = {
+	{
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= CSB726_IRQ_LAN,
+		.end	= CSB726_IRQ_LAN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device csb726_lan = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
+	.resource	= csb726_lan_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&csb726_flash,
+	&csb726_sm501,
+	&csb726_lan,
+};
+
+static void __init csb726_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
+/*	MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
+/*	MSC2 = 0x06697ff4; *//* none/SM501 */
+	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	pxa_set_mci_info(&csb726_mci);
+	pxa_set_ohci_info(&csb726_ohci_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(CSB726, "Cogent CSB726")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.init_machine   = csb726_init,
+	.timer          = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
new file mode 100644
index 00000000000..747ab1a71f2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -0,0 +1,26 @@
+/*
+ *  Support for Cogent CSB726
+ *
+ *  Copyright (c) 2008 Dmitry Baryshkov
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef CSB726_H
+#define CSB726_H
+
+#define CSB726_GPIO_IRQ_LAN	52
+#define CSB726_GPIO_IRQ_SM501	53
+#define CSB726_GPIO_MMC_DETECT	100
+#define CSB726_GPIO_MMC_RO	101
+
+#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
+#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
+
+#define CSB726_IRQ_LAN		gpio_to_irq(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501	gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index f4b029c0395..5706cea95d1 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -35,7 +35,8 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	if (machine_is_littleton() || machine_is_intelmote2())
+	if (machine_is_littleton() || machine_is_intelmote2()
+			|| machine_is_csb726())
 		UART = STUART;
 }
 
-- 
cgit v1.2.3


From 3b31fabfe258ecc1ffccd01dd186a534d5c804b3 Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon, 16 Feb 2009 20:40:57 +0300
Subject: [ARM] pxa: add support for CSB701 baseboard

CSB701 is one of baseboards that can be used with CSB726 SOM.
This currently adds support for button and LED on the board.
More to come later.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig  |  4 +++
 arch/arm/mach-pxa/Makefile |  1 +
 arch/arm/mach-pxa/csb701.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+)
 create mode 100644 arch/arm/mach-pxa/csb701.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ff1872db5b3..d13282d773a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -401,6 +401,10 @@ config MACH_CSB726
 	  Say Y here if you intend to run this kernel on a Cogent
 	  CSB726 System On Module.
 
+config CSB726_CSB701
+	bool "Enable supprot for CSB701 baseboard"
+	depends on MACH_CSB726
+
 config PXA_EZX
 	bool "Motorola EZX Platform"
 	select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 96a72f02c13..8da8e63d048 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
new file mode 100644
index 00000000000..4a2a2952c37
--- /dev/null
+++ b/arch/arm/mach-pxa/csb701.c
@@ -0,0 +1,61 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+static struct gpio_keys_button csb701_buttons[] = {
+	{
+		.code	= 0x7,
+		.gpio	= 1,
+		.active_low = 1,
+		.desc	= "SW2",
+		.type	= EV_SW,
+		.wakeup = 1,
+	},
+};
+
+static struct gpio_keys_platform_data csb701_gpio_keys_data = {
+	.buttons = csb701_buttons,
+	.nbuttons = ARRAY_SIZE(csb701_buttons),
+};
+
+static struct gpio_led csb701_leds[] = {
+	{
+		.name	= "csb701:yellow:heartbeat",
+		.default_trigger = "heartbeat",
+		.gpio	= 11,
+		.active_low = 1,
+	},
+};
+
+static struct platform_device csb701_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev.platform_data = &csb701_gpio_keys_data,
+};
+
+static struct gpio_led_platform_data csb701_leds_gpio_data = {
+	.leds		= csb701_leds,
+	.num_leds	= ARRAY_SIZE(csb701_leds),
+};
+
+static struct platform_device csb701_leds_gpio = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev.platform_data = &csb701_leds_gpio_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&csb701_gpio_keys,
+	&csb701_leds_gpio,
+};
+
+static int __init csb701_init(void)
+{
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+module_init(csb701_init);
+
-- 
cgit v1.2.3


From 689b4febeca7e98ad1986cf5b036539649cc1a0c Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Fri, 30 Jan 2009 20:48:24 +0100
Subject: [ARM] pxa/MioA701: add gpio_vbus driver

Add gpio vbus detection to udc driver, by taking advantage
of the new gpio_vbus driver.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/mioa701.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index e77c95ca67f..735cb94c4a1 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -36,6 +36,7 @@
 #include <linux/power_supply.h>
 #include <linux/wm97xx_batt.h>
 #include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -452,6 +453,12 @@ static void udc_exit(void)
 	mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
 }
 
+struct gpio_vbus_mach_info gpio_vbus_data = {
+	.gpio_vbus = GPIO13_nUSB_DETECT,
+	.gpio_vbus_inverted = 1,
+	.gpio_pullup = -1,
+};
+
 /*
  * SDIO/MMC Card controller
  */
@@ -790,6 +797,7 @@ MIO_SIMPLE_DEV(pxa2xx_ac97,	  "pxa2xx-ac97",    NULL)
 MIO_PARENT_DEV(mio_wm9713_codec,  "wm9713-codec",   &pxa2xx_ac97.dev, NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -801,7 +809,8 @@ static struct platform_device *devices[] __initdata = {
 	&mioa701_sound,
 	&power_dev,
 	&strataflash,
-	&mioa701_board
+	&gpio_vbus,
+	&mioa701_board,
 };
 
 static void mioa701_machine_exit(void);
-- 
cgit v1.2.3


From cefdb2a4436ec83b4c8b349aa30f976d30c22e25 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 31 Jan 2009 21:07:09 +0100
Subject: [ARM] pxa/MioA701: Migrate after pxa27x_udc gpio_pullup
 functionality.

Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/mioa701.c | 35 ++---------------------------------
 1 file changed, 2 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 735cb94c4a1..025772785d3 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -413,21 +413,6 @@ static void gsm_exit(void)
 /*
  * USB UDC
  */
-static void udc_power_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		gpio_set_value(GPIO22_USB_ENABLE, 0);
-		break;
-	case PXA2XX_UDC_CMD_CONNECT:
-		gpio_set_value(GPIO22_USB_ENABLE, 1);
-		break;
-	default:
-		printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
-		break;
-	}
-}
-
 static int is_usb_connected(void)
 {
 	return !gpio_get_value(GPIO13_nUSB_DETECT);
@@ -435,24 +420,9 @@ static int is_usb_connected(void)
 
 static struct pxa2xx_udc_mach_info mioa701_udc_info = {
 	.udc_is_connected = is_usb_connected,
-	.udc_command	  = udc_power_command,
+	.gpio_pullup	  = GPIO22_USB_ENABLE,
 };
 
-struct gpio_ress udc_gpios[] = {
-	MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
-};
-
-static int __init udc_init(void)
-{
-	pxa_set_udc_info(&mioa701_udc_info);
-	return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
-}
-
-static void udc_exit(void)
-{
-	mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
-}
-
 struct gpio_vbus_mach_info gpio_vbus_data = {
 	.gpio_vbus = GPIO13_nUSB_DETECT,
 	.gpio_vbus_inverted = 1,
@@ -847,7 +817,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
-	udc_init();
+	pxa_set_udc_info(&mioa701_udc_info);
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -860,7 +830,6 @@ static void __init mioa701_machine_init(void)
 
 static void mioa701_machine_exit(void)
 {
-	udc_exit();
 	bootstrap_exit();
 	gsm_exit();
 }
-- 
cgit v1.2.3


From ccfe30a7c8329e85ae426813a1060e27e2547dd1 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Thu, 29 Jan 2009 10:07:50 +0100
Subject: arm/imx2x: new IOMUX definitions

* removed iomux-mx1-mx2.h completely
* distributes the former contents to four different files (iomux-mx1.h,
  iomux-mx21.h, iomux-mx27.h and the file iomux-mx2x.h, which is common to
  both i.MX21 and i.MX27).
* adds all documented IOMUX definitions for i.MX21 and i.MX27
* fixes a few that were wrong (PD14_AOUT_FEC_CLR, PE16_AF_RTCK).
* don't silenly include <linux/io.h>
* and fixes all collateral damage from above

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/devices.c                    |   1 +
 arch/arm/mach-mx1/mx1ads.c                     |   2 +-
 arch/arm/mach-mx2/mx27ads.c                    |   4 +-
 arch/arm/mach-mx2/pcm038.c                     |   7 +-
 arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h | 416 -------------------------
 arch/arm/plat-mxc/include/mach/iomux-mx1.h     | 166 ++++++++++
 arch/arm/plat-mxc/include/mach/iomux-mx21.h    | 126 ++++++++
 arch/arm/plat-mxc/include/mach/iomux-mx27.h    | 207 ++++++++++++
 arch/arm/plat-mxc/include/mach/iomux-mx2x.h    | 237 ++++++++++++++
 arch/arm/plat-mxc/include/mach/iomux.h         | 127 ++++++++
 arch/arm/plat-mxc/iomux-mx1-mx2.c              |   2 +-
 11 files changed, 872 insertions(+), 423 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx1.h
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx21.h
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx27.h
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx2x.h
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 686d8d2dbb2..cea8f2c7119 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 
 static struct resource imx_csi_resources[] = {
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 2e4b185fe4a..be7dd75ebbe 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -24,7 +24,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
 #include "devices.h"
 
 /*
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 2b5c67f5457..7721c470d5a 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -31,7 +31,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
 #include <mach/board-mx27ads.h>
 
 #include "devices.h"
@@ -196,7 +196,7 @@ static int mxc_fec_pins[] = {
 	PD11_AOUT_FEC_TX_CLK,
 	PD12_AOUT_FEC_RXD0,
 	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_CLR,
+	PD14_AOUT_FEC_RX_CLK,
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index dfd4156da7d..534fd9a4ff9 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -20,11 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
+#include <linux/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
 #include <asm/mach/time.h>
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
@@ -170,7 +171,7 @@ static int mxc_fec_pins[] = {
 	PD11_AOUT_FEC_TX_CLK,
 	PD12_AOUT_FEC_RXD0,
 	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_CLR,
+	PD14_AOUT_FEC_RX_CLK,
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN
@@ -217,7 +218,7 @@ static void __init pcm038_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
-	mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
+	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
deleted file mode 100644
index 95a383be628..00000000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef _MXC_GPIO_MX1_MX2_H
-#define _MXC_GPIO_MX1_MX2_H
-
-#include <linux/io.h>
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-/*-------------------------------------------------------------------------*/
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK     (GPIO_PORTA | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD    (GPIO_PORTA | GPIO_IN | 1)
-#define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
-#define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0        (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1        (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2        (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3        (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4        (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5        (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6       (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7       (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC    (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC    (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK   (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS     (GPIO_PORTA | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0           (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4          (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5          (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16          (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17          (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18          (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19          (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20          (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21          (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22          (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23          (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK  (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO        (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1       (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9)
-#define PB9_AF_MS_PI1        (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2      (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10)
-#define PB10_AF_MS_SCLKI     (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3      (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO      (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK       (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0     (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS        (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS     (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK    (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT    (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
-#define PB17_AF_SSI_TXDAT    (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
-#define PB18_AF_SSI_TXFS     (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK    (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE     (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE      (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PFUSBD_RCV      (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND  (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP      (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM      (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO     (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO     (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
-#define PB29_PF_UART2_RTS    (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
-#define PB30_PF_UART2_TXD    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
-#define PB31_PF_UART2_RXD    (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
-#define PC3_PF_SSI_RXFS      (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK     (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT     (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_SSI_TXDAT     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
-#define PC7_PF_SSI_TXFS      (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK     (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_UART1_RTS    (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
-#define PC11_PF_UART1_TXD    (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_UART1_RXD    (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
-#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK    (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI    (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR  (GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS  (GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX    (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX   (GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
-#define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR     (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK    (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS      (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD    (GPIO_PORTD | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
-#define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD    (GPIO_PORTD | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
-#define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
-#define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
-#define PD14_PF_FLM_VSYNC    (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
-#define PD15_PF_LD0          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
-#define PD16_PF_LD1          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
-#define PD17_PF_LD2          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_LD3          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_PF_LD4          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
-#define PD20_PF_LD5          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
-#define PD21_PF_LD6          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
-#define PD22_PF_LD7          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
-#define PD23_PF_LD8          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
-#define PD24_PF_LD9          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
-#define PD25_PF_LD10         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_LD11         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD27_PF_LD12         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_LD13         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
-#define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD    (GPIO_PORTD | GPIO_BIN | 31)
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
-#define PA6_PF_LD0		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
-#define PA7_PF_LD1		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
-#define PA8_PF_LD2		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
-#define PA9_PF_LD3		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
-#define PA10_PF_LD4		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
-#define PA11_PF_LD5		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
-#define PA12_PF_LD6		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
-#define PA13_PF_LD7		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
-#define PA14_PF_LD8		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
-#define PA15_PF_LD9		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_LD10		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_PF_LD11		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
-#define PA18_PF_LD12		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
-#define PA19_PF_LD13		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
-#define PA20_PF_LD14		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
-#define PA21_PF_LD15		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
-#define PA22_PF_LD16		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
-#define PA23_PF_LD17		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
-#define PA24_PF_REV		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
-#define PA25_PF_CLS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
-#define PA26_PF_PS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
-#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
-#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
-#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
-#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
-#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
-#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF |  4)
-#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF |  5)
-#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF |  6)
-#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF |  7)
-#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF |  8)
-#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF |  9)
-#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
-#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
-#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
-#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 11)
-#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
-#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
-#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
-#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 13)
-#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
-#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
-#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
-#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
-#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
-#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
-#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
-#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 19)
-#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
-#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
-#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
-#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 21)
-#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC_B	(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE_B	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
-#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_PF | 26)
-#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
-#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
-#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
-#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
-#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
-#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
-#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
-#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
-#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
-#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
-#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
-#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
-#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
-#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 19)
-#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 20)
-#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 21)
-#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 22)
-#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 23)
-#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 24)
-#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 25)
-#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 26)
-#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 27)
-#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 28)
-#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 29)
-#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 30)
-#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 31)
-#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
-#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
-#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
-#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
-#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
-#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
-#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
-#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
-#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
-#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
-#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
-#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
-#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
-#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
-#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
-#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
-#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
-#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
-#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 25)
-#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 26)
-#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
-#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 27)
-#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 28)
-#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 29)
-#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
-#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
-#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
-#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
-#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
-#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
-#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
-#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
-#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
-#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
-#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
-#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
-#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
-#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
-#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
-#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
-#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
-#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
-#define PE16_AF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
-#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
-#define PE18_PF_SDHC1_D0	(GPIO_PORTE | GPIO_PF | 18)
-#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
-#define PE19_PF_SDHC1_D1	(GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SDHC1_D2	(GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SDHC1_D3	(GPIO_PORTE | GPIO_PF | 21)
-#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
-#define PE22_PF_SDHC1_CMD	(GPIO_PORTE | GPIO_PF | 22)
-#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
-#define PE22_PF_SDHC1_CLK	(GPIO_PORTE | GPIO_PF | 23)
-#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
-#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
-#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
-#endif
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
new file mode 100644
index 00000000000..bf23305c19c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -0,0 +1,166 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX1_H
+#define _MXC_IOMUX_MX1_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/* FIXME: This list is not completed. The correct directions are
+* missing on some (many) pins
+*/
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
new file mode 100644
index 00000000000..63aaa972e27
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -0,0 +1,126 @@
+/*
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX21_H
+#define _MXC_IOMUX_MX21_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
+
+/* Alternate GPIO pin functions */
+
+#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+
+/* CIN GPIO pin functions */
+
+#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+
+/* AOUT GPIO pin functions */
+
+#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
new file mode 100644
index 00000000000..5ac158b70f6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -0,0 +1,207 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX27_H
+#define _MXC_IOMUX_MX27_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
+#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
+#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
+
+/* Alternate GPIO pin functions */
+
+#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
+#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
+#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+
+/* CIN GPIO pin functions */
+
+#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
+
+/* AOUT GPIO pin functions */
+
+#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
new file mode 100644
index 00000000000..fb5ae638e79
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -0,0 +1,237 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX2x_H
+#define _MXC_IOMUX_MX2x_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
+
+/* Alternate GPIO pin functions */
+
+#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+
+/* AIN GPIO pin functions */
+
+#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+
+/* CIN GPIO pin functions */
+
+#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+
+/* AOUT GPIO pin functions */
+
+#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
+#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
new file mode 100644
index 00000000000..171f8adc110
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -0,0 +1,127 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_H
+#define _MXC_IOMUX_H
+
+/*
+*  GPIO Module and I/O Multiplexer
+*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x)    (0x00 + ((x) << 8))
+#define MXC_OCR1(x)    (0x04 + ((x) << 8))
+#define MXC_OCR2(x)    (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x)      (0x1c + ((x) << 8))
+#define MXC_GIUS(x)    (0x20 + ((x) << 8))
+#define MXC_SSR(x)     (0x24 + ((x) << 8))
+#define MXC_ICR1(x)    (0x28 + ((x) << 8))
+#define MXC_ICR2(x)    (0x2c + ((x) << 8))
+#define MXC_IMR(x)     (0x30 + ((x) << 8))
+#define MXC_ISR(x)     (0x34 + ((x) << 8))
+#define MXC_GPR(x)     (0x38 + ((x) << 8))
+#define MXC_SWR(x)     (0x3c + ((x) << 8))
+#define MXC_PUEN(x)    (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX  3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX  5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT   (1 << 8)
+#define GPIO_IN    (0 << 8)
+#define GPIO_PUEN  (1 << 9)
+
+#define GPIO_PF    (1 << 10)
+#define GPIO_AF    (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+
+
+#ifdef CONFIG_ARCH_MX1
+#include <mach/iomux-mx1.h>
+#endif
+#ifdef CONFIG_ARCH_MX2
+#include <mach/iomux-mx2x.h>
+#ifdef CONFIG_MACH_MX21
+#include <mach/iomux-mx21.h>
+#endif
+#ifdef CONFIG_MACH_MX27
+#include <mach/iomux-mx27.h>
+#endif
+#endif
+
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+	const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index df6f1839568..a37163ce280 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -32,7 +32,7 @@
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
-- 
cgit v1.2.3


From 5512e88f3a1f1b498fd07181f14596ee117b3471 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Mon, 26 Jan 2009 16:34:52 +0100
Subject: arm/imx21: add kbuild support for the Freescale i.MX21

* adds Kconfig variables
* specifies different physical address for i.MX21 because of the
  different memory layouts
* disables support for UART5/UART6 in the i.MX serial driver
  (the i.MX21 doesn't have those modules)

Based on code from "Martin Fuzzey" <mfuzzey@gmail.com>

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig               | 13 +++++++++++++
 arch/arm/mach-mx2/Makefile.boot         | 10 +++++++---
 arch/arm/mach-mx2/serial.c              |  2 ++
 arch/arm/plat-mxc/include/mach/memory.h |  5 +++++
 arch/arm/plat-mxc/include/mach/mxc.h    |  4 ++++
 5 files changed, 31 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 1eaa97cb716..412d2d55b08 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -1,12 +1,25 @@
 comment "MX2 family CPU support"
 	depends on ARCH_MX2
 
+choice
+	prompt "MX2 Type"
+	depends on ARCH_MX2
+	default MACH_MX21
+
+config MACH_MX21
+	bool "i.MX21 support"
+	depends on ARCH_MX2
+	help
+	  This enables support for Freescale's MX2 based i.MX21 processor.
+
 config MACH_MX27
 	bool "i.MX27 support"
 	depends on ARCH_MX2
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
+endchoice
+
 comment "MX2 Platforms"
 	depends on ARCH_MX2
 
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
index 696831dcd48..e867398a8fd 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-mx2/Makefile.boot
@@ -1,3 +1,7 @@
-   zreladdr-y	:= 0xA0008000
-params_phys-y	:= 0xA0000100
-initrd_phys-y	:= 0xA0800000
+zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
+params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+
+zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
+params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 16debc296da..b9e66fb1186 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -99,6 +99,7 @@ struct platform_device mxc_uart_device3 = {
 	.num_resources = ARRAY_SIZE(uart3),
 };
 
+#ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
 	{
 		.start = UART5_BASE_ADDR,
@@ -136,3 +137,4 @@ struct platform_device mxc_uart_device5 = {
 	.resource = uart5,
 	.num_resources = ARRAY_SIZE(uart5),
 };
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 0b808399097..e0783e61958 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -14,7 +14,12 @@
 #if defined CONFIG_ARCH_MX1
 #define PHYS_OFFSET		UL(0x08000000)
 #elif defined CONFIG_ARCH_MX2
+#ifdef CONFIG_MACH_MX21
+#define PHYS_OFFSET		UL(0xC0000000)
+#endif
+#ifdef CONFIG_MACH_MX27
 #define PHYS_OFFSET		UL(0xA0000000)
+#endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index f6caab06213..bbd848e004d 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -29,6 +29,10 @@
 # define cpu_is_mx31() (0)
 #endif
 
+#ifndef CONFIG_MACH_MX21
+# define cpu_is_mx21() (0)
+#endif
+
 #ifndef CONFIG_MACH_MX27
 # define cpu_is_mx27() (0)
 #endif
-- 
cgit v1.2.3


From a2865197a5dad23c619c84f44b7fdf7fdbef3f9c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 26 Jan 2009 15:41:16 +0100
Subject: [ARM] MXC: Use a single function for decoding a PLL

We had 3 versions of this function in clock support for MX1/2/3
Use a single one instead. I picked the one from the MX3 as it seems
to calculate more accurate as the other ones. Also, on MX27 and MX31 mfn
can be negative, this hasn't been handled correctly on MX27 since now.

This patch has been tested on MX27 and MX31 and produces the same clock
frequencies for me.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c              | 31 ++----------------------
 arch/arm/mach-mx2/clock_imx27.c        | 42 ++++++--------------------------
 arch/arm/mach-mx3/clock.c              | 26 ++------------------
 arch/arm/plat-mxc/clock.c              | 44 ++++++++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/clock.h |  2 ++
 5 files changed, 57 insertions(+), 88 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 4bcd1ece55f..3c464331b87 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -87,33 +87,6 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
 	return clk->parent->set_rate(clk->parent, rate);
 }
 
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
 static unsigned long clk16m_get_rate(struct clk *clk)
 {
 	return 16000000;
@@ -188,7 +161,7 @@ static struct clk prem_clk = {
 
 static unsigned long system_clk_get_rate(struct clk *clk)
 {
-	return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
 			      clk_get_rate(clk->parent));
 }
 
@@ -200,7 +173,7 @@ static struct clk system_clk = {
 
 static unsigned long mcu_clk_get_rate(struct clk *clk)
 {
-	return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
 			      clk_get_rate(clk->parent));
 }
 
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index c69896d011a..047e71e6ea9 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -486,26 +486,8 @@ static struct clk ckil_clk = {
 
 static unsigned long get_mpll_clk(struct clk *clk)
 {
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_MPCTL0);
-	pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+			clk_get_rate(clk->parent));
 }
 
 static struct clk mpll_clk = {
@@ -555,28 +537,18 @@ static unsigned long get_spll_clk(struct clk *clk)
 {
 	uint32_t reg;
 	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
 
 	ref_clk = clk_get_rate(clk->parent);
 
 	reg = __raw_readl(CCM_SPCTL0);
-	/*TODO: This is TO2 Bug */
+
+	/* On TO2 we have to write the value back. Otherwise we
+	 * read 0 from this register the next time.
+	 */
 	if (mx27_revision() >= CHIP_REV_2_0)
 		__raw_writel(reg, CCM_SPCTL0);
 
-	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
+	return mxc_decode_pll(reg, ref_clk);
 }
 
 static struct clk spll_clk = {
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b1746aae1f8..8486ea46d6c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -158,10 +158,8 @@ static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
 
 static unsigned long _clk_pll_get_rate(struct clk *clk)
 {
-	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
 	unsigned long reg, ccmr;
-	s64 temp;
-	unsigned int prcs;
+	unsigned int prcs, ref_clk;
 
 	ccmr = __raw_readl(MXC_CCM_CCMR);
 	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
@@ -185,27 +183,7 @@ static unsigned long _clk_pll_get_rate(struct clk *clk)
 		return 0;
 	}
 
-	pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
-	mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
-	mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
-
-	if (mfn >= 0x200) {
-		mfn |= 0xFFFFFE00;
-		mfn_abs = -mfn;
-	}
-
-	ref_clk *= 2;
-	ref_clk /= pdf + 1;
-
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd + 1);
-	if (mfn < 0)
-		temp = -temp;
-	temp = (ref_clk * mfi) + temp;
-
-	return temp;
+	return mxc_decode_pll(reg, ref_clk);
 }
 
 static int _clk_usb_pll_enable(struct clk *clk)
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 0a38f0b396e..888dd33abf7 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -328,3 +328,47 @@ static int __init mxc_setup_proc_entry(void)
 
 late_initcall(mxc_setup_proc_entry);
 #endif
+
+/*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can at least be found on
+ * MX1, MX21, MX27 and MX31
+ *
+ *                  mfi + mfn / (mfd + 1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
+{
+	long long ll;
+	int mfn_abs;
+	unsigned int mfi, mfn, mfd, pd;
+
+	mfi = (reg_val >> 10) & 0xf;
+	mfn = reg_val & 0x3ff;
+	mfd = (reg_val >> 16) & 0x3ff;
+	pd =  (reg_val >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	mfn_abs = mfn;
+
+#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
+	if (mfn >= 0x200) {
+		mfn |= 0xFFFFFE00;
+		mfn_abs = -mfn;
+	}
+#endif
+
+	freq *= 2;
+	freq /= pd + 1;
+
+	ll = (unsigned long long)freq * mfn_abs;
+
+	do_div(ll, mfd + 1);
+	if (mfn < 0)
+		ll = -ll;
+	ll = (freq * mfi) + ll;
+
+	return ll;
+}
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index d21f78e7881..b830655514e 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -63,5 +63,7 @@ struct clk {
 int clk_register(struct clk *clk);
 void clk_unregister(struct clk *clk);
 
+unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_ARCH_MXC_CLOCK_H__ */
-- 
cgit v1.2.3


From 30c730f8f90b08d77a73998d2ee34cf1f56e95cc Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 16 Feb 2009 14:36:49 +0100
Subject: [ARM] MXC: rework timer/clock initialisation

- rename mxc_clocks_init to architecture specific versions. This
  allows us to have more than one architecture compiled in.
- call mxc_timer_init from clock initialisation instead from board
  code

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c               |  5 ++++-
 arch/arm/mach-mx1/mx1ads.c              |  3 +--
 arch/arm/mach-mx2/clock_imx27.c         |  5 ++++-
 arch/arm/mach-mx2/mx27ads.c             |  3 +--
 arch/arm/mach-mx2/pcm038.c              |  3 +--
 arch/arm/mach-mx3/clock.c               |  5 ++++-
 arch/arm/mach-mx3/mx31ads.c             |  3 +--
 arch/arm/mach-mx3/mx31lite.c            |  3 +--
 arch/arm/mach-mx3/mx31moboard.c         |  3 +--
 arch/arm/mach-mx3/mx31pdk.c             |  3 +--
 arch/arm/mach-mx3/pcm037.c              |  3 +--
 arch/arm/plat-mxc/include/mach/common.h |  7 +++++--
 arch/arm/plat-mxc/time.c                | 20 +++++---------------
 13 files changed, 30 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 3c464331b87..40a2274380a 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -25,6 +25,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 static int _clk_enable(struct clk *clk)
@@ -594,7 +595,7 @@ static struct clk *mxc_clks[] = {
 	&rtc_clk,
 };
 
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx1_clocks_init(unsigned long fref)
 {
 	struct clk **clkp;
 	unsigned int reg;
@@ -625,5 +626,7 @@ int __init mxc_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
+	mxc_timer_init(&gpt_clk);
+
 	return 0;
 }
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index be7dd75ebbe..09dc77bb481 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -118,8 +118,7 @@ static void __init mx1ads_init(void)
 
 static void __init mx1ads_timer_init(void)
 {
-	mxc_clocks_init(32000);
-	mxc_timer_init("gpt_clk");
+	mx1_clocks_init(32000);
 }
 
 struct sys_timer mx1ads_timer = {
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 047e71e6ea9..7b2c1122d9a 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -1551,7 +1551,7 @@ static void __init probe_mxc_clocks(void)
  * must be called very early to get information about the
  * available clock rate when the timer framework starts
  */
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx27_clocks_init(unsigned long fref)
 {
 	u32 cscr;
 	struct clk **clkp;
@@ -1593,5 +1593,8 @@ int __init mxc_clocks_init(unsigned long fref)
 #ifdef CONFIG_DEBUG_LL_CONSOLE
 	clk_enable(&uart1_clk[0]);
 #endif
+
+	mxc_timer_init(&gpt1_clk[0]);
+
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 7721c470d5a..536bf64bc7c 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -263,8 +263,7 @@ static void __init mx27ads_timer_init(void)
 	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
 		fref = 27000000;
 
-	mxc_clocks_init(fref);
-	mxc_timer_init("gpt_clk.0");
+	mx27_clocks_init(fref);
 }
 
 struct sys_timer mx27ads_timer = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 534fd9a4ff9..63cdef8565d 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -230,8 +230,7 @@ static void __init pcm038_init(void)
 
 static void __init pcm038_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("gpt_clk.0");
+	mx27_clocks_init(26000000);
 }
 
 struct sys_timer pcm038_timer = {
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8486ea46d6c..8b41facb391 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
@@ -1071,7 +1072,7 @@ static struct clk *mxc_clks[] = {
 	&iim_clk,
 };
 
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx31_clocks_init(unsigned long fref)
 {
 	u32 reg;
 	struct clk **clkp;
@@ -1121,6 +1122,8 @@ int __init mxc_clocks_init(unsigned long fref)
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
+	mxc_timer_init(&ipg_clk);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index f902a7c37c3..f913999eedf 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -244,8 +244,7 @@ static void __init mxc_board_init(void)
 
 static void __init mx31ads_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer mx31ads_timer = {
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index c4344007014..e61fad2f60f 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -82,8 +82,7 @@ static void __init mxc_board_init(void)
 
 static void __init mx31lite_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer mx31lite_timer = {
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index c29098af739..3d2773e4bc8 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -120,8 +120,7 @@ void __init mx31moboard_map_io(void)
 
 static void __init mx31moboard_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer mx31moboard_timer = {
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index d464d068a4a..ac427edb4db 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -91,8 +91,7 @@ static void __init mxc_board_init(void)
 
 static void __init mx31pdk_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 static struct sys_timer mx31pdk_timer = {
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 8cea8258722..3b5ba551cb1 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -181,8 +181,7 @@ void __init pcm037_map_io(void)
 
 static void __init pcm037_timer_init(void)
 {
-	mxc_clocks_init(26000000);
-	mxc_timer_init("ipg_clk.0");
+	mx31_clocks_init(26000000);
 }
 
 struct sys_timer pcm037_timer = {
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 6350287a59b..2c08b8e14e3 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -12,11 +12,14 @@
 #define __ASM_ARCH_MXC_COMMON_H__
 
 struct platform_device;
+struct clk;
 
 extern void mxc_map_io(void);
 extern void mxc_init_irq(void);
-extern void mxc_timer_init(const char *clk_timer);
-extern int mxc_clocks_init(unsigned long fref);
+extern void mxc_timer_init(struct clk *timer_clk);
+extern int mx1_clocks_init(unsigned long fref);
+extern int mx27_clocks_init(unsigned long fref);
+extern int mx31_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 758a1293bcf..eb93fd1789d 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -34,9 +34,6 @@
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-/* clock source for the timer */
-static struct clk *timer_clk;
-
 /* clock source */
 
 static cycle_t mxc_get_cycles(void)
@@ -53,7 +50,7 @@ static struct clocksource clocksource_mxc = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static int __init mxc_clocksource_init(void)
+static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int clock;
 
@@ -177,7 +174,7 @@ static struct clock_event_device clockevent_mxc = {
 	.rating		= 200,
 };
 
-static int __init mxc_clockevent_init(void)
+static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int clock;
 
@@ -197,14 +194,8 @@ static int __init mxc_clockevent_init(void)
 	return 0;
 }
 
-void __init mxc_timer_init(const char *clk_timer)
+void __init mxc_timer_init(struct clk *timer_clk)
 {
-	timer_clk = clk_get(NULL, clk_timer);
-	if (!timer_clk) {
-		printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
-		return;
-	}
-
 	clk_enable(timer_clk);
 
 	/*
@@ -219,10 +210,9 @@ void __init mxc_timer_init(const char *clk_timer)
 		     TIMER_BASE + MXC_TCTL);
 
 	/* init and register the timer to the framework */
-	mxc_clocksource_init();
-	mxc_clockevent_init();
+	mxc_clocksource_init(timer_clk);
+	mxc_clockevent_init(timer_clk);
 
 	/* Make irqs happen */
 	setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
 }
-
-- 
cgit v1.2.3


From e65fb0099fe4fe82d59ffe84f1e88a489218d7f9 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 16 Feb 2009 14:29:10 +0100
Subject: [ARM] MXC: remove _clk suffix from clock names

The context makes it clear already that these are clocks, so there's
no need for such a suffix. This patch only changes the clocks actually
used in the tree. The remaining clocks are renamed in the subsequent
architecture specific patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c       |  4 ++--
 arch/arm/mach-mx2/clock_imx27.c | 18 +++++++++---------
 arch/arm/mach-mx3/clock.c       | 14 +++++++-------
 arch/arm/plat-mxc/dma-mx1-mx2.c |  2 +-
 4 files changed, 19 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 40a2274380a..0d0f306851d 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -462,7 +462,7 @@ static struct clk clko_clk = {
 };
 
 static struct clk dma_clk = {
-	.name = "dma_clk",
+	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -513,7 +513,7 @@ static struct clk gpt_clk = {
 };
 
 static struct clk uart_clk = {
-	.name = "uart_clk",
+	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 7b2c1122d9a..700a22f5ae8 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -685,7 +685,7 @@ static struct clk per_clk[] = {
 
 struct clk uart1_clk[] = {
 	{
-		.name = "uart_clk",
+		.name = "uart",
 		.id = 0,
 		.parent = &per_clk[0],
 		.secondary = &uart1_clk[1],
@@ -702,7 +702,7 @@ struct clk uart1_clk[] = {
 
 struct clk uart2_clk[] = {
 	{
-		.name = "uart_clk",
+		.name = "uart",
 		.id = 1,
 		.parent = &per_clk[0],
 		.secondary = &uart2_clk[1],
@@ -719,7 +719,7 @@ struct clk uart2_clk[] = {
 
 struct clk uart3_clk[] = {
 	{
-		.name = "uart_clk",
+		.name = "uart",
 		.id = 2,
 		.parent = &per_clk[0],
 		.secondary = &uart3_clk[1],
@@ -736,7 +736,7 @@ struct clk uart3_clk[] = {
 
 struct clk uart4_clk[] = {
 	{
-		.name = "uart_clk",
+		.name = "uart",
 		.id = 3,
 		.parent = &per_clk[0],
 		.secondary = &uart4_clk[1],
@@ -753,7 +753,7 @@ struct clk uart4_clk[] = {
 
 struct clk uart5_clk[] = {
 	{
-		.name = "uart_clk",
+		.name = "uart",
 		.id = 4,
 		.parent = &per_clk[0],
 		.secondary = &uart5_clk[1],
@@ -770,7 +770,7 @@ struct clk uart5_clk[] = {
 
 struct clk uart6_clk[] = {
 	{
-		.name = "uart_clk",
+		.name = "uart",
 		.id = 5,
 		.parent = &per_clk[0],
 		.secondary = &uart6_clk[1],
@@ -1110,7 +1110,7 @@ static struct clk ssi2_clk[] = {
 };
 
 static struct clk nfc_clk = {
-	.name = "nfc_clk",
+	.name = "nfc",
 	.parent = &cpu_clk,
 	.get_rate = _clk_nfc_recalc,
 	.enable = _clk_enable,
@@ -1128,7 +1128,7 @@ static struct clk vpu_clk = {
 };
 
 static struct clk dma_clk = {
-	.name = "dma_clk",
+	.name = "dma",
 	.parent = &ahb_clk,
 	.enable = _clk_dma_enable,
 	.disable = _clk_dma_disable,
@@ -1260,7 +1260,7 @@ static struct clk kpp_clk = {
 };
 
 static struct clk owire_clk = {
-	.name = "owire_clk",
+	.name = "owire",
 	.parent = &ipg_clk,
 	.enable = _clk_enable,
 	.enable_reg = CCM_PCCR0,
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b41facb391..bc3a3beb9a6 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -593,7 +593,7 @@ static struct clk epit_clk[] = {
 };
 
 static struct clk nfc_clk = {
-	.name = "nfc_clk",
+	.name = "nfc",
 	.parent = &ahb_clk,
 	.get_rate = _clk_nfc_get_rate,
 };
@@ -667,7 +667,7 @@ static struct clk csi_clk = {
 
 static struct clk uart_clk[] = {
 	{
-	 .name = "uart_clk",
+	 .name = "uart",
 	 .id = 0,
 	 .parent = &perclk_clk,
 	 .enable = _clk_enable,
@@ -675,7 +675,7 @@ static struct clk uart_clk[] = {
 	 .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
 	 .disable = _clk_disable,},
 	{
-	 .name = "uart_clk",
+	 .name = "uart",
 	 .id = 1,
 	 .parent = &perclk_clk,
 	 .enable = _clk_enable,
@@ -683,7 +683,7 @@ static struct clk uart_clk[] = {
 	 .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
 	 .disable = _clk_disable,},
 	{
-	 .name = "uart_clk",
+	 .name = "uart",
 	 .id = 2,
 	 .parent = &perclk_clk,
 	 .enable = _clk_enable,
@@ -691,7 +691,7 @@ static struct clk uart_clk[] = {
 	 .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
 	 .disable = _clk_disable,},
 	{
-	 .name = "uart_clk",
+	 .name = "uart",
 	 .id = 3,
 	 .parent = &perclk_clk,
 	 .enable = _clk_enable,
@@ -699,7 +699,7 @@ static struct clk uart_clk[] = {
 	 .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
 	 .disable = _clk_disable,},
 	{
-	 .name = "uart_clk",
+	 .name = "uart",
 	 .id = 4,
 	 .parent = &perclk_clk,
 	 .enable = _clk_enable,
@@ -736,7 +736,7 @@ static struct clk i2c_clk[] = {
 };
 
 static struct clk owire_clk = {
-	.name = "owire_clk",
+	.name = "owire",
 	.parent = &perclk_clk,
 	.enable_reg = MXC_CCM_CGR1,
 	.enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 2905ec75875..1d64287c307 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -802,7 +802,7 @@ static int __init imx_dma_init(void)
 	int ret = 0;
 	int i;
 
-	dma_clk = clk_get(NULL, "dma_clk");
+	dma_clk = clk_get(NULL, "dma");
 	clk_enable(dma_clk);
 
 	/* reset DMA module */
-- 
cgit v1.2.3


From d1755e3592305f8866b4d60d63a481959d5e58bf Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 16 Feb 2009 14:27:06 +0100
Subject: [ARM] MXC: add clkdev support

This patch only adds general clkdev support without actually switching
any MXC architecture to clkdev.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c               | 10 ++++++++++
 arch/arm/plat-mxc/include/mach/clkdev.h |  7 +++++++
 arch/arm/plat-mxc/include/mach/clock.h  |  4 ++++
 3 files changed, 21 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/clkdev.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 888dd33abf7..92e13566cd4 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -47,6 +47,11 @@ static DEFINE_MUTEX(clocks_mutex);
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
+/*
+ * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
+ * MXC architectures have switched to using clkdev.
+ */
+#ifndef CONFIG_COMMON_CLKDEV
 /*
  * Retrieve a clock by name.
  *
@@ -110,6 +115,7 @@ found:
 	return clk;
 }
 EXPORT_SYMBOL(clk_get);
+#endif
 
 static void __clk_disable(struct clk *clk)
 {
@@ -187,6 +193,7 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+#ifndef CONFIG_COMMON_CLKDEV
 /* Decrement the clock's module reference count */
 void clk_put(struct clk *clk)
 {
@@ -194,6 +201,7 @@ void clk_put(struct clk *clk)
 		module_put(clk->owner);
 }
 EXPORT_SYMBOL(clk_put);
+#endif
 
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
@@ -257,6 +265,7 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
+#ifndef CONFIG_COMMON_CLKDEV
 /*
  * Add a new clock to the clock tree.
  */
@@ -327,6 +336,7 @@ static int __init mxc_setup_proc_entry(void)
 }
 
 late_initcall(mxc_setup_proc_entry);
+#endif /* CONFIG_PROC_FS */
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/clkdev.h b/arch/arm/plat-mxc/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index b830655514e..43a82d0c534 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,9 +26,13 @@
 struct module;
 
 struct clk {
+#ifndef CONFIG_COMMON_CLKDEV
+	/* As soon as i.MX1 and i.MX31 switched to clkdev, this
+	 * block can go away */
 	struct list_head node;
 	struct module *owner;
 	const char *name;
+#endif
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
-- 
cgit v1.2.3


From edfcea80eb12b43680c4be0f2e31c8f5b1288edd Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 16 Feb 2009 15:13:43 +0100
Subject: [ARM] MX27 Clock rework

This changes MX27 to use common clkdev. It also cleans up MX27 clock
support to be more readable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c | 1613 ++++++++++-----------------------------
 arch/arm/mach-mx2/cpu_imx27.c   |    4 +-
 arch/arm/mach-mx2/crm_regs.h    |  273 -------
 arch/arm/plat-mxc/Kconfig       |    1 +
 4 files changed, 387 insertions(+), 1504 deletions(-)
 delete mode 100644 arch/arm/mach-mx2/crm_regs.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 700a22f5ae8..3f7280c490f 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -1,6 +1,7 @@
 /*
  * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -20,23 +21,60 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/spinlock.h>
 
-#include <mach/clock.h>
-#include <mach/common.h>
+#include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
-
-static struct clk ckil_clk;
-static struct clk mpll_clk;
-static struct clk mpll_main_clk[];
-static struct clk spll_clk;
-
-static int _clk_enable(struct clk *clk)
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_UPDATE_DIS	(1 << 31)
+#define CCM_CSCR_SSI2		(1 << 23)
+#define CCM_CSCR_SSI1		(1 << 22)
+#define CCM_CSCR_VPU		(1 << 21)
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+static struct clk mpll_main1_clk, mpll_main2_clk;
+
+static int clk_pccr_enable(struct clk *clk)
 {
 	unsigned long reg;
 
+	if (!clk->enable_reg)
+		return 0;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg |= 1 << clk->enable_shift;
 	__raw_writel(reg, clk->enable_reg);
@@ -44,16 +82,19 @@ static int _clk_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_disable(struct clk *clk)
+static void clk_pccr_disable(struct clk *clk)
 {
 	unsigned long reg;
 
+	if (!clk->enable_reg)
+		return;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg &= ~(1 << clk->enable_shift);
 	__raw_writel(reg, clk->enable_reg);
 }
 
-static int _clk_spll_enable(struct clk *clk)
+static int clk_spll_enable(struct clk *clk)
 {
 	unsigned long reg;
 
@@ -61,13 +102,12 @@ static int _clk_spll_enable(struct clk *clk)
 	reg |= CCM_CSCR_SPEN;
 	__raw_writel(reg, CCM_CSCR);
 
-	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
-		;
+	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
 
 	return 0;
 }
 
-static void _clk_spll_disable(struct clk *clk)
+static void clk_spll_disable(struct clk *clk)
 {
 	unsigned long reg;
 
@@ -76,192 +116,30 @@ static void _clk_spll_disable(struct clk *clk)
 	__raw_writel(reg, CCM_CSCR);
 }
 
-static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg |= mask0;
-	__raw_writel(reg, CCM_PCCR0);
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg |= mask1;
-	__raw_writel(reg, CCM_PCCR1);
-
-}
-
-static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg &= ~mask0;
-	__raw_writel(reg, CCM_PCCR0);
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg &= ~mask1;
-	__raw_writel(reg, CCM_PCCR1);
-}
-
-static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg |= mask1;
-	__raw_writel(reg, CCM_PCCR1);
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg |= mask0;
-	__raw_writel(reg, CCM_PCCR0);
-}
-
-static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg &= ~mask1;
-	__raw_writel(reg, CCM_PCCR1);
-
-	reg = __raw_readl(CCM_PCCR0);
-	reg &= ~mask0;
-	__raw_writel(reg, CCM_PCCR0);
-}
-
-static int _clk_dma_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-
-	return 0;
-}
-
-static void _clk_dma_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-}
-
-static int _clk_rtic_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-
-	return 0;
-}
-
-static void _clk_rtic_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-}
-
-static int _clk_emma_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-
-	return 0;
-}
-
-static void _clk_emma_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-}
-
-static int _clk_slcdc_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-
-	return 0;
-}
-
-static void _clk_slcdc_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-}
-
-static int _clk_fec_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-
-	return 0;
-}
-
-static void _clk_fec_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-}
-
-static int _clk_vpu_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
-	__raw_writel(reg, CCM_PCCR1);
-
-	return 0;
-}
-
-static void _clk_vpu_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_PCCR1);
-	reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
-	__raw_writel(reg, CCM_PCCR1);
-}
-
-static int _clk_sahara2_enable(struct clk *clk)
-{
-	_clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-
-	return 0;
-}
-
-static void _clk_sahara2_disable(struct clk *clk)
-{
-	_clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-}
-
-static int _clk_mstick1_enable(struct clk *clk)
-{
-	_clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-
-	return 0;
-}
-
-static void _clk_mstick1_disable(struct clk *clk)
+static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
 {
-	_clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-}
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
-	int cscr = CSCR();
+	int cscr = __raw_readl(CCM_CSCR);
 
 	if (clk->parent == parent)
 		return 0;
 
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (parent == &mpll_main_clk[0]) {
+		if (parent == &mpll_main1_clk) {
 			cscr |= CCM_CSCR_ARM_SRC;
 		} else {
-			if (parent == &mpll_main_clk[1])
+			if (parent == &mpll_main2_clk)
 				cscr &= ~CCM_CSCR_ARM_SRC;
 			else
 				return -EINVAL;
 		}
 		__raw_writel(cscr, CCM_CSCR);
-	} else
-		return -ENODEV;
-
-	clk->parent = parent;
-	return 0;
+		clk->parent = parent;
+		return 0;
+	}
+	return -ENODEV;
 }
 
-static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
 {
 	int div;
 	unsigned long parent_rate;
@@ -278,7 +156,7 @@ static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
 	return parent_rate / div;
 }
 
-static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_cpu(struct clk *clk, unsigned long rate)
 {
 	unsigned int div;
 	uint32_t reg;
@@ -295,19 +173,18 @@ static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
 
 	reg = __raw_readl(CCM_CSCR);
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		reg &= ~CCM_CSCR_ARM_MASK;
-		reg |= div << CCM_CSCR_ARM_OFFSET;
-		reg &= ~0x06;
-		__raw_writel(reg | 0x80000000, CCM_CSCR);
+		reg &= ~(3 << 12);
+		reg |= div << 12;
+		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
+		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
 	} else {
-		printk(KERN_ERR "Cant set CPU frequency!\n");
+		printk(KERN_ERR "Can't set CPU frequency!\n");
 	}
 
 	return 0;
 }
 
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
-					     unsigned long rate)
+static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
 {
 	u32 div;
 	unsigned long parent_rate;
@@ -324,7 +201,7 @@ static unsigned long _clk_perclkx_round_rate(struct clk *clk,
 	return parent_rate / div;
 }
 
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_per(struct clk *clk, unsigned long rate)
 {
 	u32 reg;
 	u32 div;
@@ -340,84 +217,65 @@ static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 	div--;
 
-	reg =
-	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
-				       (clk->id << 3));
+	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
 	reg |= div << (clk->id << 3);
 	__raw_writel(reg, CCM_PCDR1);
 
 	return 0;
 }
 
-static unsigned long _clk_usb_recalc(struct clk *clk)
+static unsigned long get_rate_usb(struct clk *clk)
 {
 	unsigned long usb_pdf;
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
 
 	return parent_rate / (usb_pdf + 1U);
 }
 
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
+static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
 {
-	unsigned long ssi1_pdf;
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
-					CCM_PCDR0_SSI1BAUDDIV_OFFSET;
-
 	if (mx27_revision() >= CHIP_REV_2_0)
-		ssi1_pdf += 4;
+		pdf += 4;  /* MX27 TO2+ */
 	else
-		ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
 
-	return 2UL * parent_rate / ssi1_pdf;
+	return 2UL * parent_rate / pdf;
 }
 
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
+static unsigned long get_rate_ssi1(struct clk *clk)
 {
-	unsigned long ssi2_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
-	    CCM_PCDR0_SSI2BAUDDIV_OFFSET;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		ssi2_pdf += 4;
-	else
-		ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
+}
 
-	return 2UL * parent_rate / ssi2_pdf;
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
 }
 
-static unsigned long _clk_nfc_recalc(struct clk *clk)
+static unsigned long get_rate_nfc(struct clk *clk)
 {
 	unsigned long nfc_pdf;
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		nfc_pdf =
-		    (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
-		    CCM_PCDR0_NFCDIV2_OFFSET;
-	} else {
-		nfc_pdf =
-		    (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
-		    CCM_PCDR0_NFCDIV_OFFSET;
-	}
+	if (mx27_revision() >= CHIP_REV_2_0)
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
+	else
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
 
 	return parent_rate / (nfc_pdf + 1);
 }
 
-static unsigned long _clk_vpu_recalc(struct clk *clk)
+static unsigned long get_rate_vpu(struct clk *clk)
 {
 	unsigned long vpu_pdf;
 	unsigned long parent_rate;
@@ -425,25 +283,27 @@ static unsigned long _clk_vpu_recalc(struct clk *clk)
 	parent_rate = clk_get_rate(clk->parent);
 
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		vpu_pdf =
-		    (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
-		    CCM_PCDR0_VPUDIV2_OFFSET;
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
 		vpu_pdf += 4;
 	} else {
-		vpu_pdf =
-		    (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
-		    CCM_PCDR0_VPUDIV_OFFSET;
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
 		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
 	}
+
 	return 2UL * parent_rate / vpu_pdf;
 }
 
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
 {
 	return clk->parent->round_rate(clk->parent, rate);
 }
 
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long get_rate_parent(struct clk *clk)
+{
+	return clk_get_rate(clk->parent);
+}
+
+static int set_rate_parent(struct clk *clk, unsigned long rate)
 {
 	return clk->parent->set_rate(clk->parent, rate);
 }
@@ -451,94 +311,52 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
 /* in Hz */
 static unsigned long external_high_reference = 26000000;
 
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_high_reference(struct clk *clk)
 {
 	return external_high_reference;
 }
 
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
-	.name = "ckih",
-	.get_rate = get_high_reference_clock_rate,
-};
-
 /* in Hz */
 static unsigned long external_low_reference = 32768;
 
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_low_reference(struct clk *clk)
 {
 	return external_low_reference;
 }
 
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz Could be changed at runtime
- * with a call to change_external_low_reference()
- */
-static struct clk ckil_clk = {
-	.name = "ckil",
-	.get_rate = get_low_reference_clock_rate,
-};
+static unsigned long get_rate_fpm(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 1024;
+}
 
-static unsigned long get_mpll_clk(struct clk *clk)
+static unsigned long get_rate_mpll(struct clk *clk)
 {
 	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
 			clk_get_rate(clk->parent));
 }
 
-static struct clk mpll_clk = {
-	.name = "mpll",
-	.parent = &ckih_clk,
-	.get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
+static unsigned long get_rate_mpll_main(struct clk *clk)
 {
 	unsigned long parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
 	/* i.MX27 TO2:
-	 * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
-	 * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
+	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
+	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
 	 */
-
 	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
 		return 2UL * parent_rate / 3UL;
 
 	return parent_rate;
 }
 
-static struct clk mpll_main_clk[] = {
-	{
-		/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
-		 * It provide the clock source whose rate is same as MPLL
-		 */
-		.name = "mpll_main",
-		.id = 0,
-		.parent = &mpll_clk,
-		.get_rate = _clk_mpll_main_get_rate
-	}, {
-		/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
-		 * It provide the clock source whose rate is same MPLL * 2/3
-		 */
-		.name = "mpll_main",
-		.id = 1,
-		.parent = &mpll_clk,
-		.get_rate = _clk_mpll_main_get_rate
-	}
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
+static unsigned long get_rate_spll(struct clk *clk)
 {
 	uint32_t reg;
-	unsigned long ref_clk;
+	unsigned long rate;
 
-	ref_clk = clk_get_rate(clk->parent);
+	rate = clk_get_rate(clk->parent);
 
 	reg = __raw_readl(CCM_SPCTL0);
 
@@ -548,987 +366,325 @@ static unsigned long get_spll_clk(struct clk *clk)
 	if (mx27_revision() >= CHIP_REV_2_0)
 		__raw_writel(reg, CCM_SPCTL0);
 
-	return mxc_decode_pll(reg, ref_clk);
+	return mxc_decode_pll(reg, rate);
 }
 
-static struct clk spll_clk = {
-	.name = "spll",
-	.parent = &ckih_clk,
-	.get_rate = get_spll_clk,
-	.enable = _clk_spll_enable,
-	.disable = _clk_spll_disable,
-};
-
-static unsigned long get_cpu_clk(struct clk *clk)
+static unsigned long get_rate_cpu(struct clk *clk)
 {
 	u32 div;
 	unsigned long rate;
 
 	if (mx27_revision() >= CHIP_REV_2_0)
-		div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
+		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
 	else
-		div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
 
 	rate = clk_get_rate(clk->parent);
 	return rate / (div + 1);
 }
 
-static struct clk cpu_clk = {
-	.name = "cpu_clk",
-	.parent = &mpll_main_clk[1],
-	.set_parent = _clk_cpu_set_parent,
-	.round_rate = _clk_cpu_round_rate,
-	.get_rate = get_cpu_clk,
-	.set_rate = _clk_cpu_set_rate,
-};
-
-static unsigned long get_ahb_clk(struct clk *clk)
+static unsigned long get_rate_ahb(struct clk *clk)
 {
-	unsigned long rate;
-	unsigned long bclk_pdf;
+	unsigned long rate, bclk_pdf;
 
 	if (mx27_revision() >= CHIP_REV_2_0)
-		bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
-					>> CCM_CSCR_AHB_OFFSET;
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
 	else
-		bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
-					>> CCM_CSCR_BCLK_OFFSET;
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
 
 	rate = clk_get_rate(clk->parent);
 	return rate / (bclk_pdf + 1);
 }
 
-static struct clk ahb_clk = {
-	.name = "ahb_clk",
-	.parent = &mpll_main_clk[1],
-	.get_rate = get_ahb_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
+static unsigned long get_rate_ipg(struct clk *clk)
 {
-	unsigned long rate;
-	unsigned long ipg_pdf;
+	unsigned long rate, ipg_pdf;
 
 	if (mx27_revision() >= CHIP_REV_2_0)
 		return clk_get_rate(clk->parent);
 	else
-		ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
 
 	rate = clk_get_rate(clk->parent);
 	return rate / (ipg_pdf + 1);
 }
 
-static struct clk ipg_clk = {
-	.name = "ipg_clk",
-	.parent = &ahb_clk,
-	.get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
+static unsigned long get_rate_per(struct clk *clk)
 {
-	unsigned long perclk_pdf;
-	unsigned long parent_rate;
+	unsigned long perclk_pdf, parent_rate;
 
 	parent_rate = clk_get_rate(clk->parent);
 
 	if (clk->id < 0 || clk->id > 3)
 		return 0;
 
-	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
 
 	return parent_rate / (perclk_pdf + 1);
 }
 
-static struct clk per_clk[] = {
-	{
-		.name = "per_clk",
-		.id = 0,
-		.parent = &mpll_main_clk[1],
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "per_clk",
-		.id = 1,
-		.parent = &mpll_main_clk[1],
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "per_clk",
-		.id = 2,
-		.parent = &mpll_main_clk[1],
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "per_clk",
-		.id = 3,
-		.parent = &mpll_main_clk[1],
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart1_clk[] = {
-	{
-		.name = "uart",
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &uart1_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART1_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart2_clk[] = {
-	{
-		.name = "uart",
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &uart2_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart3_clk[] = {
-	{
-		.name = "uart",
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &uart3_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart4_clk[] = {
-	{
-		.name = "uart",
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &uart4_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart5_clk[] = {
-	{
-		.name = "uart",
-		.id = 4,
-		.parent = &per_clk[0],
-		.secondary = &uart5_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 4,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART5_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-struct clk uart6_clk[] = {
-	{
-		.name = "uart",
-		.id = 5,
-		.parent = &per_clk[0],
-		.secondary = &uart6_clk[1],
-	}, {
-		.name = "uart_ipg_clk",
-		.id = 5,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_UART6_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt1_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &gpt1_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT1_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt2_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &gpt2_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt3_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &gpt3_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt4_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &gpt4_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt5_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 4,
-		.parent = &per_clk[0],
-		.secondary = &gpt5_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 4,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT5_OFFSET,
-		.disable = _clk_disable,
-	},
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+	.get_rate	= get_rate_high_reference,
 };
 
-static struct clk gpt6_clk[] = {
-	{
-		.name = "gpt_clk",
-		.id = 5,
-		.parent = &per_clk[0],
-		.secondary = &gpt6_clk[1],
-	}, {
-		.name = "gpt_ipg_clk",
-		.id = 5,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_GPT6_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk mpll_clk = {
+	.parent		= &ckih_clk,
+	.get_rate	= get_rate_mpll,
 };
 
-static struct clk pwm_clk[] = {
-	{
-		.name = "pwm_clk",
-		.parent = &per_clk[0],
-		.secondary = &pwm_clk[1],
-	}, {
-		.name = "pwm_clk",
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_PWM_OFFSET,
-		.disable = _clk_disable,
-	},
+/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provides the clock source whose rate is same as MPLL
+ */
+static struct clk mpll_main1_clk = {
+	.id		= 0,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
 };
 
-static struct clk sdhc1_clk[] = {
-	{
-		.name = "sdhc_clk",
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &sdhc1_clk[1],
-	}, {
-		.name = "sdhc_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SDHC1_OFFSET,
-		.disable = _clk_disable,
-	},
+/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provides the clock source whose rate is same MPLL * 2 / 3
+ */
+static struct clk mpll_main2_clk = {
+	.id		= 1,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
 };
 
-static struct clk sdhc2_clk[] = {
-	{
-		.name = "sdhc_clk",
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &sdhc2_clk[1],
-	}, {
-		.name = "sdhc_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SDHC2_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk ahb_clk = {
+	.parent		= &mpll_main2_clk,
+	.get_rate	= get_rate_ahb,
 };
 
-static struct clk sdhc3_clk[] = {
-	{
-		.name = "sdhc_clk",
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &sdhc3_clk[1],
-	}, {
-		.name = "sdhc_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SDHC3_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk ipg_clk = {
+	.parent		= &ahb_clk,
+	.get_rate	= get_rate_ipg,
 };
 
-static struct clk cspi1_clk[] = {
-	{
-		.name = "cspi_clk",
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &cspi1_clk[1],
-	}, {
-		.name = "cspi_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_CSPI1_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk cpu_clk = {
+	.parent = &mpll_main2_clk,
+	.set_parent = clk_cpu_set_parent,
+	.round_rate = round_rate_cpu,
+	.get_rate = get_rate_cpu,
+	.set_rate = set_rate_cpu,
 };
 
-static struct clk cspi2_clk[] = {
-	{
-		.name = "cspi_clk",
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &cspi2_clk[1],
-	}, {
-		.name = "cspi_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_CSPI2_OFFSET,
-		.disable = _clk_disable,
-	},
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_rate_spll,
+	.enable = clk_spll_enable,
+	.disable = clk_spll_disable,
 };
 
-static struct clk cspi3_clk[] = {
-	{
-		.name = "cspi_clk",
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &cspi3_clk[1],
-	}, {
-		.name = "cspi_ipg_clk",
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_CSPI3_OFFSET,
-		.disable = _clk_disable,
-	},
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_rate_low_reference,
 };
 
-static struct clk lcdc_clk[] = {
-	{
-		.name = "lcdc_clk",
-		.parent = &per_clk[2],
-		.secondary = &lcdc_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.name = "lcdc_ipg_clk",
-		.parent = &ipg_clk,
-		.secondary = &lcdc_clk[2],
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_LCDC_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "lcdc_ahb_clk",
-		.parent = &ahb_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
-		.disable = _clk_disable,
-	},
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = get_rate_fpm,
 };
 
-static struct clk csi_clk[] = {
-	{
-		.name = "csi_perclk",
-		.parent = &per_clk[3],
-		.secondary = &csi_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.name = "csi_ahb_clk",
-		.parent = &ahb_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
-		.disable = _clk_disable,
-	},
-};
+#define PCCR0 CCM_PCCR0
+#define PCCR1 CCM_PCCR1
 
-static struct clk usb_clk[] = {
-	{
-		.name = "usb_clk",
-		.parent = &spll_clk,
-		.get_rate = _clk_usb_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_USBOTG_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "usb_ahb_clk",
-		.parent = &ahb_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
-		.disable = _clk_disable,
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= clk_pccr_enable,	\
+		.disable	= clk_pccr_disable,	\
+		.secondary	= s,			\
+		.parent		= p,			\
 	}
-};
-
-static struct clk ssi1_clk[] = {
-	{
-		.name = "ssi_clk",
-		.id = 0,
-		.parent = &mpll_main_clk[1],
-		.secondary = &ssi1_clk[1],
-		.get_rate = _clk_ssi1_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "ssi_ipg_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk ssi2_clk[] = {
-	{
-		.name = "ssi_clk",
-		.id = 1,
-		.parent = &mpll_main_clk[1],
-		.secondary = &ssi2_clk[1],
-		.get_rate = _clk_ssi2_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR1,
-		.enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "ssi_ipg_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk nfc_clk = {
-	.name = "nfc",
-	.parent = &cpu_clk,
-	.get_rate = _clk_nfc_recalc,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk vpu_clk = {
-	.name = "vpu_clk",
-	.parent = &mpll_main_clk[1],
-	.get_rate = _clk_vpu_recalc,
-	.enable = _clk_vpu_enable,
-	.disable = _clk_vpu_disable,
-};
-
-static struct clk dma_clk = {
-	.name = "dma",
-	.parent = &ahb_clk,
-	.enable = _clk_dma_enable,
-	.disable = _clk_dma_disable,
-};
-
-static struct clk rtic_clk = {
-	.name = "rtic_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_rtic_enable,
-	.disable = _clk_rtic_disable,
-};
 
-static struct clk brom_clk = {
-	.name = "brom_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk emma_clk = {
-	.name = "emma_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_emma_enable,
-	.disable = _clk_emma_disable,
-};
-
-static struct clk slcdc_clk = {
-	.name = "slcdc_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_slcdc_enable,
-	.disable = _clk_slcdc_disable,
-};
-
-static struct clk fec_clk = {
-	.name = "fec_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_fec_enable,
-	.disable = _clk_fec_disable,
-};
-
-static struct clk emi_clk = {
-	.name = "emi_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk sahara2_clk = {
-	.name = "sahara_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_sahara2_enable,
-	.disable = _clk_sahara2_disable,
-};
-
-static struct clk ata_clk = {
-	.name = "ata_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mstick1_clk = {
-	.name = "mstick1_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_mstick1_enable,
-	.disable = _clk_mstick1_disable,
-};
-
-static struct clk wdog_clk = {
-	.name = "wdog_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR1_WDT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
-	.name = "gpio_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR1,
-	.enable_shift = CCM_PCCR0_GPIO_OFFSET,
-	.disable = _clk_disable,
-};
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= get_rate_##getsetround,	\
+		.set_rate	= set_rate_##getsetround,	\
+		.round_rate	= round_rate_##getsetround,	\
+		.enable		= clk_pccr_enable,		\
+		.disable	= clk_pccr_disable,		\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
 
-static struct clk i2c_clk[] = {
-	{
-		.name = "i2c_clk",
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_I2C1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.name = "i2c_clk",
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR0,
-		.enable_shift = CCM_PCCR0_I2C2_OFFSET,
-		.disable = _clk_disable,
+/* Forward declaration to keep the following list in order */
+static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
+		  dma_clk1, lcdc_clk2, vpu_clk1;
+
+/* All clocks we can gate through PCCRx in the order of PCCRx bits */
+DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
+DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
+DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
+DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
+DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
+DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
+DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
+DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
+DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
+DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
+
+/* Clocks we cannot directly gate, but drivers need their rates */
+DEFINE_CLOCK(cspi1_clk,    0, 0,      0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk,    1, 0,      0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk,    2, 0,      0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk,    0, 0,      0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk,    1, 0,      0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk,    2, 0,      0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk,      0, 0,      0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk,     0, 0,      0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk,     1, 0,      0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk,     2, 0,      0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk,     3, 0,      0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk,     4, 0,      0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk,     5, 0,      0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk,    0, 0,      0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk,    1, 0,      0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk,    2, 0,      0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk,    3, 0,      0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk,    4, 0,      0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk,    5, 0,      0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk,    0, 0,      0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
 	},
-};
 
-static struct clk iim_clk = {
-	.name = "iim_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_IIM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.name = "kpp_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
-	.name = "owire",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_OWIRE_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
-	.name = "rtc_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk scc_clk = {
-	.name = "scc_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR0,
-	.enable_shift = CCM_PCCR0_SCC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		div = 8;
-
-	return parent_rate / div;
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
-	reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
-		CCM_PCDR0_CLKODIV_OFFSET;
-	div++;
-
-	return parent_rate / div;
-}
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
-	if (parent == &ckil_clk)
-		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == mpll_clk.parent)
-		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == spll_clk.parent)
-		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mpll_clk)
-		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &spll_clk)
-		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &cpu_clk)
-		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ahb_clk)
-		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[0])
-		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[1])
-		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[2])
-		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[3])
-		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi1_clk[0])
-		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi2_clk[0])
-		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mstick1_clk)
-		reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &vpu_clk)
-		reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_clk[0])
-		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, CCM_CCSR);
-
-	return 0;
-}
-
-static int _clk_clko_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static void _clk_clko_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
-	__raw_writel(reg, CCM_PCDR0);
-}
-
-static struct clk clko_clk = {
-	.name = "clko_clk",
-	.get_rate = _clk_clko_recalc,
-	.set_rate = _clk_clko_set_rate,
-	.round_rate = _clk_clko_round_rate,
-	.set_parent = _clk_clko_set_parent,
-	.enable = _clk_clko_enable,
-	.disable = _clk_clko_disable,
-};
-
-static struct clk *mxc_clks[] = {
-	&ckih_clk,
-	&ckil_clk,
-	&mpll_clk,
-	&mpll_main_clk[0],
-	&mpll_main_clk[1],
-	&spll_clk,
-	&cpu_clk,
-	&ahb_clk,
-	&ipg_clk,
-	&per_clk[0],
-	&per_clk[1],
-	&per_clk[2],
-	&per_clk[3],
-	&clko_clk,
-	&uart1_clk[0],
-	&uart1_clk[1],
-	&uart2_clk[0],
-	&uart2_clk[1],
-	&uart3_clk[0],
-	&uart3_clk[1],
-	&uart4_clk[0],
-	&uart4_clk[1],
-	&uart5_clk[0],
-	&uart5_clk[1],
-	&uart6_clk[0],
-	&uart6_clk[1],
-	&gpt1_clk[0],
-	&gpt1_clk[1],
-	&gpt2_clk[0],
-	&gpt2_clk[1],
-	&gpt3_clk[0],
-	&gpt3_clk[1],
-	&gpt4_clk[0],
-	&gpt4_clk[1],
-	&gpt5_clk[0],
-	&gpt5_clk[1],
-	&gpt6_clk[0],
-	&gpt6_clk[1],
-	&pwm_clk[0],
-	&pwm_clk[1],
-	&sdhc1_clk[0],
-	&sdhc1_clk[1],
-	&sdhc2_clk[0],
-	&sdhc2_clk[1],
-	&sdhc3_clk[0],
-	&sdhc3_clk[1],
-	&cspi1_clk[0],
-	&cspi1_clk[1],
-	&cspi2_clk[0],
-	&cspi2_clk[1],
-	&cspi3_clk[0],
-	&cspi3_clk[1],
-	&lcdc_clk[0],
-	&lcdc_clk[1],
-	&lcdc_clk[2],
-	&csi_clk[0],
-	&csi_clk[1],
-	&usb_clk[0],
-	&usb_clk[1],
-	&ssi1_clk[0],
-	&ssi1_clk[1],
-	&ssi2_clk[0],
-	&ssi2_clk[1],
-	&nfc_clk,
-	&vpu_clk,
-	&dma_clk,
-	&rtic_clk,
-	&brom_clk,
-	&emma_clk,
-	&slcdc_clk,
-	&fec_clk,
-	&emi_clk,
-	&sahara2_clk,
-	&ata_clk,
-	&mstick1_clk,
-	&wdog_clk,
-	&gpio_clk,
-	&i2c_clk[0],
-	&i2c_clk[1],
-	&iim_clk,
-	&kpp_clk,
-	&owire_clk,
-	&rtc_clk,
-	&scc_clk,
-};
-
-void __init change_external_low_reference(unsigned long new_ref)
-{
-	external_low_reference = new_ref;
-}
-
-unsigned long __init clk_early_get_timer_rate(void)
-{
-	return clk_get_rate(&per_clk[0]);
-}
-
-static void __init probe_mxc_clocks(void)
-{
-	int i;
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
+	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
+	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
+	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
+	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
+	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
+	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
+	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
+	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
+	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk)
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
+	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+};
+
+/* Adjust the clock path for TO2 and later */
+static void __init to2_adjust_clocks(void)
+{
+	unsigned long cscr = __raw_readl(CCM_CSCR);
 
 	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (CSCR() & 0x8000)
-			cpu_clk.parent = &mpll_main_clk[0];
+		if (cscr & CCM_CSCR_ARM_SRC)
+			cpu_clk.parent = &mpll_main1_clk;
 
-		if (!(CSCR() & 0x00800000))
-			ssi2_clk[0].parent = &spll_clk;
+		if (!(cscr & CCM_CSCR_SSI2))
+			ssi1_clk.parent = &spll_clk;
 
-		if (!(CSCR() & 0x00400000))
-			ssi1_clk[0].parent = &spll_clk;
+		if (!(cscr & CCM_CSCR_SSI1))
+			ssi1_clk.parent = &spll_clk;
 
-		if (!(CSCR() & 0x00200000))
+		if (!(cscr & CCM_CSCR_VPU))
 			vpu_clk.parent = &spll_clk;
 	} else {
 		cpu_clk.parent = &mpll_clk;
@@ -1537,11 +693,13 @@ static void __init probe_mxc_clocks(void)
 		cpu_clk.set_rate = NULL;
 		ahb_clk.parent = &mpll_clk;
 
-		for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
-			per_clk[i].parent = &mpll_clk;
+		per1_clk.parent = &mpll_clk;
+		per2_clk.parent = &mpll_clk;
+		per3_clk.parent = &mpll_clk;
+		per4_clk.parent = &mpll_clk;
 
-		ssi1_clk[0].parent = &mpll_clk;
-		ssi2_clk[0].parent = &mpll_clk;
+		ssi1_clk.parent = &mpll_clk;
+		ssi2_clk.parent = &mpll_clk;
 
 		vpu_clk.parent = &mpll_clk;
 	}
@@ -1553,48 +711,45 @@ static void __init probe_mxc_clocks(void)
  */
 int __init mx27_clocks_init(unsigned long fref)
 {
-	u32 cscr;
-	struct clk **clkp;
+	u32 cscr = __raw_readl(CCM_CSCR);
+	int i;
 
 	external_high_reference = fref;
 
-	/* detect clock reference for both system PLL */
-	cscr = CSCR();
+	/* detect clock reference for both system PLLs */
 	if (cscr & CCM_CSCR_MCU)
 		mpll_clk.parent = &ckih_clk;
 	else
-		mpll_clk.parent = &ckil_clk;
+		mpll_clk.parent = &fpm_clk;
 
 	if (cscr & CCM_CSCR_SP)
 		spll_clk.parent = &ckih_clk;
 	else
-		spll_clk.parent = &ckil_clk;
+		spll_clk.parent = &fpm_clk;
 
-	probe_mxc_clocks();
+	to2_adjust_clocks();
 
-	per_clk[0].enable(&per_clk[0]);
-	gpt1_clk[1].enable(&gpt1_clk[1]);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	/* Turn off all clocks we do not need */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
 
-	/* Turn off all possible clocks */
-	__raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
-	__raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
-		     CCM_PCCR1);
 	spll_clk.disable(&spll_clk);
 
-	/* This will propagate to all children and init all the clock rates */
-
-	clk_enable(&emi_clk);
+	/* enable basic clocks */
+	clk_enable(&per1_clk);
 	clk_enable(&gpio_clk);
+	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
-	clk_enable(&gpt1_clk[0]);
+
 #ifdef CONFIG_DEBUG_LL_CONSOLE
-	clk_enable(&uart1_clk[0]);
+	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk[0]);
+	mxc_timer_init(&gpt1_clk);
 
 	return 0;
 }
+
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index 239308fe665..d9e3bf9644c 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -26,11 +26,11 @@
 
 #include <mach/hardware.h>
 
-#include "crm_regs.h"
-
 static int cpu_silicon_rev = -1;
 static int cpu_partnumber;
 
+#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+
 static void query_silicon_parameter(void)
 {
 	u32 val;
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
deleted file mode 100644
index 94644cd0a0f..00000000000
--- a/arch/arm/mach-mx2/crm_regs.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_USB_OFFSET     28
-#define CCM_CSCR_USB_MASK       (0x7 << 28)
-#define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << 24)
-#define CCM_CSCR_SSI2           (1 << 23)
-#define CCM_CSCR_SSI2_OFFSET    23
-#define CCM_CSCR_SSI1           (1 << 22)
-#define CCM_CSCR_SSI1_OFFSET    22
-#define CCM_CSCR_VPU           (1 << 21)
-#define CCM_CSCR_VPU_OFFSET    21
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-#define CCM_CSCR_ARM_OFFSET     12
-#define CCM_CSCR_ARM_MASK       (0x3 << 12)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_PRESC_OFFSET   13
-#define CCM_CSCR_PRESC_MASK     (0x7 << 13)
-#define CCM_CSCR_BCLK_OFFSET    9
-#define CCM_CSCR_BCLK_MASK      (0xf << 9)
-#define CCM_CSCR_IPDIV_OFFSET   8
-#define CCM_CSCR_IPDIV          (1 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_AHB_OFFSET     8
-#define CCM_CSCR_AHB_MASK       (0x3 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           1
-
-#define CCM_MPCTL0_CPLM         (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET    26
-#define CCM_MPCTL0_PD_MASK      (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET   16
-#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET   10
-#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET   0
-#define CCM_MPCTL0_MFN_MASK     0x3ff
-
-#define CCM_MPCTL1_LF           (1 << 15)
-#define CCM_MPCTL1_BRMO         (1 << 6)
-
-#define CCM_SPCTL0_CPLM         (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET    26
-#define CCM_SPCTL0_PD_MASK      (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET   16
-#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET   10
-#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET   0
-#define CCM_SPCTL0_MFN_MASK     0x3ff
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET       16
-#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET        8
-#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET    0
-#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_CLKO_EN               25
-#define CCM_PCDR0_CLKODIV_OFFSET        22
-#define CCM_PCDR0_CLKODIV_MASK          (0x7 << 22)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-/*The difinition for i.MX27 TO2*/
-#define CCM_PCDR0_VPUDIV2_OFFSET        10
-#define CCM_PCDR0_VPUDIV2_MASK          (0x3f << 10)
-#define CCM_PCDR0_NFCDIV2_OFFSET         6
-#define CCM_PCDR0_NFCDIV2_MASK           (0xf << 6)
-#define CCM_PCDR0_MSHCDIV2_MASK          0x3f
-/*The difinition for i.MX27 TO2*/
-#define CCM_PCDR0_NFCDIV_OFFSET         12
-#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_VPUDIV_OFFSET        8
-#define CCM_PCDR0_VPUDIV_MASK          (0xf << 8)
-#define CCM_PCDR0_MSHCDIV_OFFSET        0
-#define CCM_PCDR0_MSHCDIV_MASK          0x1f
-
-#define CCM_PCDR1_PERDIV4_OFFSET        24
-#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET        16
-#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET        8
-#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET        0
-#define CCM_PCDR1_PERDIV1_MASK          0x3f
-
-#define CCM_PCCR0_CSPI1_OFFSET          31
-#define CCM_PCCR0_CSPI1_MASK            (1 << 31)
-#define CCM_PCCR0_CSPI2_OFFSET          30
-#define CCM_PCCR0_CSPI2_MASK            (1 << 30)
-#define CCM_PCCR0_CSPI3_OFFSET          29
-#define CCM_PCCR0_CSPI3_MASK            (1 << 29)
-#define CCM_PCCR0_DMA_OFFSET            28
-#define CCM_PCCR0_DMA_MASK              (1 << 28)
-#define CCM_PCCR0_EMMA_OFFSET           27
-#define CCM_PCCR0_EMMA_MASK             (1 << 27)
-#define CCM_PCCR0_FEC_OFFSET            26
-#define CCM_PCCR0_FEC_MASK              (1 << 26)
-#define CCM_PCCR0_GPIO_OFFSET           25
-#define CCM_PCCR0_GPIO_MASK             (1 << 25)
-#define CCM_PCCR0_GPT1_OFFSET           24
-#define CCM_PCCR0_GPT1_MASK             (1 << 24)
-#define CCM_PCCR0_GPT2_OFFSET           23
-#define CCM_PCCR0_GPT2_MASK             (1 << 23)
-#define CCM_PCCR0_GPT3_OFFSET           22
-#define CCM_PCCR0_GPT3_MASK             (1 << 22)
-#define CCM_PCCR0_GPT4_OFFSET           21
-#define CCM_PCCR0_GPT4_MASK             (1 << 21)
-#define CCM_PCCR0_GPT5_OFFSET           20
-#define CCM_PCCR0_GPT5_MASK             (1 << 20)
-#define CCM_PCCR0_GPT6_OFFSET           19
-#define CCM_PCCR0_GPT6_MASK             (1 << 19)
-#define CCM_PCCR0_I2C1_OFFSET           18
-#define CCM_PCCR0_I2C1_MASK             (1 << 18)
-#define CCM_PCCR0_I2C2_OFFSET           17
-#define CCM_PCCR0_I2C2_MASK             (1 << 17)
-#define CCM_PCCR0_IIM_OFFSET            16
-#define CCM_PCCR0_IIM_MASK              (1 << 16)
-#define CCM_PCCR0_KPP_OFFSET            15
-#define CCM_PCCR0_KPP_MASK              (1 << 15)
-#define CCM_PCCR0_LCDC_OFFSET           14
-#define CCM_PCCR0_LCDC_MASK             (1 << 14)
-#define CCM_PCCR0_MSHC_OFFSET           13
-#define CCM_PCCR0_MSHC_MASK             (1 << 13)
-#define CCM_PCCR0_OWIRE_OFFSET          12
-#define CCM_PCCR0_OWIRE_MASK            (1 << 12)
-#define CCM_PCCR0_PWM_OFFSET            11
-#define CCM_PCCR0_PWM_MASK              (1 << 11)
-#define CCM_PCCR0_RTC_OFFSET            9
-#define CCM_PCCR0_RTC_MASK              (1 << 9)
-#define CCM_PCCR0_RTIC_OFFSET           8
-#define CCM_PCCR0_RTIC_MASK             (1 << 8)
-#define CCM_PCCR0_SAHARA_OFFSET         7
-#define CCM_PCCR0_SAHARA_MASK           (1 << 7)
-#define CCM_PCCR0_SCC_OFFSET            6
-#define CCM_PCCR0_SCC_MASK              (1 << 6)
-#define CCM_PCCR0_SDHC1_OFFSET          5
-#define CCM_PCCR0_SDHC1_MASK            (1 << 5)
-#define CCM_PCCR0_SDHC2_OFFSET          4
-#define CCM_PCCR0_SDHC2_MASK            (1 << 4)
-#define CCM_PCCR0_SDHC3_OFFSET          3
-#define CCM_PCCR0_SDHC3_MASK            (1 << 3)
-#define CCM_PCCR0_SLCDC_OFFSET          2
-#define CCM_PCCR0_SLCDC_MASK            (1 << 2)
-#define CCM_PCCR0_SSI1_IPG_OFFSET       1
-#define CCM_PCCR0_SSI1_IPG_MASK         (1 << 1)
-#define CCM_PCCR0_SSI2_IPG_OFFSET       0
-#define CCM_PCCR0_SSI2_IPG_MASK         (1 << 0)
-
-#define CCM_PCCR1_UART1_OFFSET          31
-#define CCM_PCCR1_UART1_MASK            (1 << 31)
-#define CCM_PCCR1_UART2_OFFSET          30
-#define CCM_PCCR1_UART2_MASK            (1 << 30)
-#define CCM_PCCR1_UART3_OFFSET          29
-#define CCM_PCCR1_UART3_MASK            (1 << 29)
-#define CCM_PCCR1_UART4_OFFSET          28
-#define CCM_PCCR1_UART4_MASK            (1 << 28)
-#define CCM_PCCR1_UART5_OFFSET          27
-#define CCM_PCCR1_UART5_MASK            (1 << 27)
-#define CCM_PCCR1_UART6_OFFSET          26
-#define CCM_PCCR1_UART6_MASK            (1 << 26)
-#define CCM_PCCR1_USBOTG_OFFSET         25
-#define CCM_PCCR1_USBOTG_MASK           (1 << 25)
-#define CCM_PCCR1_WDT_OFFSET            24
-#define CCM_PCCR1_WDT_MASK              (1 << 24)
-#define CCM_PCCR1_HCLK_ATA_OFFSET       23
-#define CCM_PCCR1_HCLK_ATA_MASK         (1 << 23)
-#define CCM_PCCR1_HCLK_BROM_OFFSET      22
-#define CCM_PCCR1_HCLK_BROM_MASK        (1 << 22)
-#define CCM_PCCR1_HCLK_CSI_OFFSET       21
-#define CCM_PCCR1_HCLK_CSI_MASK         (1 << 21)
-#define CCM_PCCR1_HCLK_DMA_OFFSET       20
-#define CCM_PCCR1_HCLK_DMA_MASK         (1 << 20)
-#define CCM_PCCR1_HCLK_EMI_OFFSET       19
-#define CCM_PCCR1_HCLK_EMI_MASK         (1 << 19)
-#define CCM_PCCR1_HCLK_EMMA_OFFSET      18
-#define CCM_PCCR1_HCLK_EMMA_MASK        (1 << 18)
-#define CCM_PCCR1_HCLK_FEC_OFFSET       17
-#define CCM_PCCR1_HCLK_FEC_MASK         (1 << 17)
-#define CCM_PCCR1_HCLK_VPU_OFFSET       16
-#define CCM_PCCR1_HCLK_VPU_MASK         (1 << 16)
-#define CCM_PCCR1_HCLK_LCDC_OFFSET      15
-#define CCM_PCCR1_HCLK_LCDC_MASK        (1 << 15)
-#define CCM_PCCR1_HCLK_RTIC_OFFSET      14
-#define CCM_PCCR1_HCLK_RTIC_MASK        (1 << 14)
-#define CCM_PCCR1_HCLK_SAHARA_OFFSET    13
-#define CCM_PCCR1_HCLK_SAHARA_MASK      (1 << 13)
-#define CCM_PCCR1_HCLK_SLCDC_OFFSET     12
-#define CCM_PCCR1_HCLK_SLCDC_MASK       (1 << 12)
-#define CCM_PCCR1_HCLK_USBOTG_OFFSET    11
-#define CCM_PCCR1_HCLK_USBOTG_MASK      (1 << 11)
-#define CCM_PCCR1_PERCLK1_OFFSET        10
-#define CCM_PCCR1_PERCLK1_MASK          (1 << 10)
-#define CCM_PCCR1_PERCLK2_OFFSET        9
-#define CCM_PCCR1_PERCLK2_MASK          (1 << 9)
-#define CCM_PCCR1_PERCLK3_OFFSET        8
-#define CCM_PCCR1_PERCLK3_MASK          (1 << 8)
-#define CCM_PCCR1_PERCLK4_OFFSET        7
-#define CCM_PCCR1_PERCLK4_MASK          (1 << 7)
-#define CCM_PCCR1_VPU_BAUD_OFFSET       6
-#define CCM_PCCR1_VPU_BAUD_MASK         (1 << 6)
-#define CCM_PCCR1_SSI1_BAUD_OFFSET      5
-#define CCM_PCCR1_SSI1_BAUD_MASK        (1 << 5)
-#define CCM_PCCR1_SSI2_BAUD_OFFSET      4
-#define CCM_PCCR1_SSI2_BAUD_MASK        (1 << 4)
-#define CCM_PCCR1_NFC_BAUD_OFFSET       3
-#define CCM_PCCR1_NFC_BAUD_MASK         (1 << 3)
-#define CCM_PCCR1_MSHC_BAUD_OFFSET      2
-#define CCM_PCCR1_MSHC_BAUD_MASK        (1 << 2)
-
-#define CCM_CCSR_32KSR          (1 << 15)
-#define CCM_CCSR_CLKMODE1       (1 << 9)
-#define CCM_CCSR_CLKMODE0       (1 << 8)
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK   0x1f
-
-#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
-#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 9cc2b16fdf7..10f65bf27b2 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -15,6 +15,7 @@ config ARCH_MX1
 config ARCH_MX2
 	bool "MX2-based"
 	select CPU_ARM926T
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
-- 
cgit v1.2.3


From 058b7a6f465bebd87c1f295afdd56cc6a33dffbd Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Mon, 26 Jan 2009 16:34:51 +0100
Subject: arm/imx2x: removes a bunch of sparse-warnings

Here are some of the warnings that get fixed by this:

> 200 times: warning: cast adds address space to expression (<asn:2>)
twelve times: warning: symbol 'xxx' was not declared. Should it be static
two times: warning: symbol 'clock' shadows an earlier one
five times: warning: incorrect type in initializer (different address spaces)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c                    | 15 +++++++++------
 arch/arm/mach-mx2/generic.c                    |  1 +
 arch/arm/mach-mx2/mx27ads.c                    |  4 ++--
 arch/arm/mach-mx2/pcm038.c                     |  2 +-
 arch/arm/mach-mx2/serial.c                     |  1 +
 arch/arm/plat-mxc/devices.c                    |  1 +
 arch/arm/plat-mxc/include/mach/board-mx27ads.h |  3 ++-
 arch/arm/plat-mxc/include/mach/mx27.h          |  2 +-
 arch/arm/plat-mxc/time.c                       | 12 ++++--------
 9 files changed, 22 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 2f9240be1c7..9ddd6d06105 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -34,6 +34,9 @@
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "devices.h"
 
 /*
  * Resource definition for the MXC IrDA
@@ -230,32 +233,32 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
 	},
 	[1] = {
 		.chip.label = "gpio-1",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
 	},
 	[2] = {
 		.chip.label = "gpio-2",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
 	},
 	[3] = {
 		.chip.label = "gpio-3",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	},
 	[4] = {
 		.chip.label = "gpio-4",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
 	},
 	[5] = {
 		.chip.label = "gpio-5",
-		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
 	}
 };
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index dea6521d4d5..bd51dd04948 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 536bf64bc7c..4548631eb3a 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -266,7 +266,7 @@ static void __init mx27ads_timer_init(void)
 	mx27_clocks_init(fref);
 }
 
-struct sys_timer mx27ads_timer = {
+static struct sys_timer mx27ads_timer = {
 	.init	= mx27ads_timer_init,
 };
 
@@ -279,7 +279,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
 	},
 };
 
-void __init mx27ads_map_io(void)
+static void __init mx27ads_map_io(void)
 {
 	mxc_map_io();
 	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 63cdef8565d..2942d59b570 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -233,7 +233,7 @@ static void __init pcm038_timer_init(void)
 	mx27_clocks_init(26000000);
 }
 
-struct sys_timer pcm038_timer = {
+static struct sys_timer pcm038_timer = {
 	.init = pcm038_timer_init,
 };
 
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index b9e66fb1186..40a485cdc10 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -22,6 +22,7 @@
 #include <linux/serial.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
+#include "devices.h"
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index c66748267c4..56f2fb5cc45 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <mach/common.h>
 
 int __init mxc_register_device(struct platform_device *pdev, void *data)
 {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 8f34a05afc8..1cac9d1135c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -48,7 +48,8 @@
  * Base address of PBC controller, CS4
  */
 #define PBC_BASE_ADDRESS        0xEB000000
-#define PBC_REG_ADDR(offset)    (PBC_BASE_ADDRESS + (offset))
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
 
 /*
  * PBC Interupt name definitions
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 0313be72055..9c609d3ba23 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -129,7 +129,7 @@
  * it returns 0xDEADBEEF
  */
 #define IO_ADDRESS(x)   \
-	(void __iomem *) \
+	(void __force __iomem *) \
 	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
 		AIPI_IO_ADDRESS(x) : \
 	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index eb93fd1789d..ef1b3cd85bd 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -52,11 +52,9 @@ static struct clocksource clocksource_mxc = {
 
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
-	unsigned int clock;
+	unsigned int c = clk_get_rate(timer_clk);
 
-	clock = clk_get_rate(timer_clk);
-
-	clocksource_mxc.mult = clocksource_hz2mult(clock,
+	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
 	clocksource_register(&clocksource_mxc);
 
@@ -176,11 +174,9 @@ static struct clock_event_device clockevent_mxc = {
 
 static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
-	unsigned int clock;
-
-	clock = clk_get_rate(timer_clk);
+	unsigned int c = clk_get_rate(timer_clk);
 
-	clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
 	clockevent_mxc.max_delta_ns =
 			clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
-- 
cgit v1.2.3


From 260a1fd26c62af482a22c6b31cc7882b4ec980d2 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Mon, 26 Jan 2009 16:34:53 +0100
Subject: arm/imx2x: split i.MX21/i.MX27 register definitions

* define new CONFIG_ARCH_MX21 (this one is currently mutually exclusive to
  CONFIG_ARCH_MX27, but this might change)
* splits one header file. Memory definitions, interrupt sources,
  DMA channels are split into common part, i.MX27 specific and i.MX21
  specific.
* guard access to UART5/UART6, which don't exist on i.MX21

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/hardware.h |   4 +
 arch/arm/plat-mxc/include/mach/mx21.h     |  81 ++++++++++++
 arch/arm/plat-mxc/include/mach/mx27.h     | 197 +++--------------------------
 arch/arm/plat-mxc/include/mach/mx2x.h     | 200 ++++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/mxc.h      |   4 +
 5 files changed, 306 insertions(+), 180 deletions(-)
 create mode 100644 arch/arm/plat-mxc/include/mach/mx21.h
 create mode 100644 arch/arm/plat-mxc/include/mach/mx2x.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a612d8bb73c..11f5727ea44 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -27,6 +27,10 @@
 #endif
 
 #ifdef CONFIG_ARCH_MX2
+# include <mach/mx2x.h>
+# ifdef CONFIG_MACH_MX21
+#  include <mach/mx21.h>
+# endif
 # ifdef CONFIG_MACH_MX27
 #  include <mach/mx27.h>
 # endif
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
new file mode 100644
index 00000000000..cfdbe051caf
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
+ *
+ * This contains i.MX21-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX21_H__
+#define __ASM_ARCH_MXC_MX21_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR         0xC0000000
+#define CSD1_BASE_ADDR          0xC4000000
+
+#define CS0_BASE_ADDR           0xC8000000
+#define CS1_BASE_ADDR           0xCC000000
+#define CS2_BASE_ADDR           0xD0000000
+#define CS3_BASE_ADDR           0xD1000000
+#define CS4_BASE_ADDR           0xD2000000
+#define CS5_BASE_ADDR           0xDD000000
+#define PCMCIA_MEM_BASE_ADDR    0xD4000000
+
+/* NAND, SDRAM, WEIM etc controllers */
+#define X_MEMC_BASE_ADDR        0xDF000000
+#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
+#define X_MEMC_SIZE             SZ_256K
+
+#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x0000)
+#define EIM_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x1000)
+#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x2000)
+#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x3000)
+
+#define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
+
+/* this is an i.MX21 CPU */
+#define cpu_is_mx21()		(1)
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS		(6*32 + 16)
+
+/* fixed interrupt numbers */
+#define MXC_INT_USBCTRL         58
+#define MXC_INT_USBCTRL         58
+#define MXC_INT_USBMNP          57
+#define MXC_INT_USBFUNC         56
+#define MXC_INT_USBHOST         55
+#define MXC_INT_USBDMA          54
+#define MXC_INT_USBWKUP         53
+#define MXC_INT_EMMADEC         50
+#define MXC_INT_EMMAENC         49
+#define MXC_INT_BMI             30
+#define MXC_INT_FIRI            9
+
+/* fixed DMA request numbers */
+#define DMA_REQ_BMI_RX          29
+#define DMA_REQ_BMI_TX          28
+#define DMA_REQ_FIRI_RX         4
+
+#endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 9c609d3ba23..5f6a8a7bb19 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -2,6 +2,10 @@
  * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
+ * This contains i.MX27-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
@@ -27,35 +31,6 @@
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
 
-/* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
-
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
 #define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
 #define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
 #define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
@@ -64,55 +39,24 @@
 #define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
 #define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
 #define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
 #define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-/* for mx27*/
 #define OTG_BASE_ADDR           USBOTG_BASE_ADDR
 #define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
 #define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-
 #define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
 #define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
 #define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
 #define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
 #define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
 
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
-
-/* ROMP and AVIC */
+/* ROM patch */
 #define ROMP_BASE_ADDR          0x10041000
 
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
 #define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
 
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
-
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
-
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR		0xA0000000
-#define CSD1_BASE_ADDR		0xB0000000
+#define SDRAM_BASE_ADDR         0xA0000000
+#define CSD1_BASE_ADDR          0xB0000000
 
 #define CS0_BASE_ADDR           0xC0000000
 #define CS1_BASE_ADDR           0xC8000000
@@ -122,44 +66,20 @@
 #define CS5_BASE_ADDR           0xD6000000
 #define PCMCIA_MEM_BASE_ADDR    0xDC000000
 
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __force __iomem *) \
-	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
-		AIPI_IO_ADDRESS(x) : \
-	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
-		SAHB1_IO_ADDRESS(x) : \
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
-		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x)  \
-	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x)  \
-	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR        0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
+#define X_MEMC_SIZE             SZ_1M
 
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
 
-/* fixed interrput numbers */
+/* fixed interrupt numbers */
 #define MXC_INT_CCM		63
 #define MXC_INT_IIM		62
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
 #define MXC_INT_SAHARA		59
 #define MXC_INT_SCC_SCM		58
 #define MXC_INT_SCC_SMN		57
@@ -167,54 +87,12 @@
 #define MXC_INT_USB2		55
 #define MXC_INT_USB1		54
 #define MXC_INT_VPU		53
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
 #define MXC_INT_FEC		50
 #define MXC_INT_UART5		49
 #define MXC_INT_UART6		48
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
 #define MXC_INT_ATA		30
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
 #define MXC_INT_SDHC3		9
-#define MXC_INT_GPIO		8
 #define MXC_INT_SDHC		7
-#define MXC_INT_CSPI3		6
 #define MXC_INT_RTIC		5
 #define MXC_INT_GPT4		4
 #define MXC_INT_GPT5		3
@@ -228,36 +106,9 @@
 #define DMA_REQ_UART6_TX        34
 #define DMA_REQ_UART5_RX        33
 #define DMA_REQ_UART5_TX        32
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
 #define DMA_REQ_ATA_RCV         29
 #define DMA_REQ_ATA_TX          28
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
 #define DMA_REQ_MSHC            4
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
 
 /* silicon revisions specific to i.MX27 */
 #define CHIP_REV_1_0		0x00
@@ -267,20 +118,6 @@
 extern int mx27_revision(void);
 #endif
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* Mandatory defines used globally */
 
 /* this is an i.MX27 CPU */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
new file mode 100644
index 00000000000..fc40d3ab8c5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This contains hardware definitions that are common between i.MX21 and
+ * i.MX27.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX2x_H__
+#define __ASM_ARCH_MXC_MX2x_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* The following addresses are common between i.MX21 and i.MX27 */
+
+/* Register offests */
+#define AIPI_BASE_ADDR          0x10000000
+#define AIPI_BASE_ADDR_VIRT     0xF4000000
+#define AIPI_SIZE               SZ_1M
+
+#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
+#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
+#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
+#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
+#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
+#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
+
+#define AVIC_BASE_ADDR          0x10040000
+
+#define SAHB1_BASE_ADDR         0x80000000
+#define SAHB1_BASE_ADDR_VIRT    0xF4100000
+#define SAHB1_SIZE              SZ_1M
+
+#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(void __force __iomem *) \
+	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+		AIPI_IO_ADDRESS(x) : \
+	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+		SAHB1_IO_ADDRESS(x) : \
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x)  \
+	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x)  \
+	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrupt numbers */
+#define MXC_INT_LCDC		61
+#define MXC_INT_SLCDC		60
+#define MXC_INT_EMMAPP		52
+#define MXC_INT_EMMAPRP		51
+#define MXC_INT_DMACH15		47
+#define MXC_INT_DMACH14		46
+#define MXC_INT_DMACH13		45
+#define MXC_INT_DMACH12		44
+#define MXC_INT_DMACH11		43
+#define MXC_INT_DMACH10		42
+#define MXC_INT_DMACH9		41
+#define MXC_INT_DMACH8		40
+#define MXC_INT_DMACH7		39
+#define MXC_INT_DMACH6		38
+#define MXC_INT_DMACH5		37
+#define MXC_INT_DMACH4		36
+#define MXC_INT_DMACH3		35
+#define MXC_INT_DMACH2		34
+#define MXC_INT_DMACH1		33
+#define MXC_INT_DMACH0		32
+#define MXC_INT_CSI		31
+#define MXC_INT_NANDFC		29
+#define MXC_INT_PCMCIA		28
+#define MXC_INT_WDOG		27
+#define MXC_INT_GPT1		26
+#define MXC_INT_GPT2		25
+#define MXC_INT_GPT3		24
+#define MXC_INT_GPT		INT_GPT1
+#define MXC_INT_PWM		23
+#define MXC_INT_RTC		22
+#define MXC_INT_KPP		21
+#define MXC_INT_UART1		20
+#define MXC_INT_UART2		19
+#define MXC_INT_UART3		18
+#define MXC_INT_UART4		17
+#define MXC_INT_CSPI1		16
+#define MXC_INT_CSPI2		15
+#define MXC_INT_SSI1		14
+#define MXC_INT_SSI2		13
+#define MXC_INT_I2C		12
+#define MXC_INT_SDHC1		11
+#define MXC_INT_SDHC2		10
+#define MXC_INT_GPIO		8
+#define MXC_INT_CSPI3		6
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x1C
+#define GPIO_GDIR	 	0x00
+#define GPIO_PSR	 	0x24
+#define GPIO_ICR1	 	0x28
+#define GPIO_ICR2	 	0x2C
+#define GPIO_IMR	 	0x30
+#define GPIO_ISR	 	0x34
+#define GPIO_INT_LOW_LEV	0x3
+#define GPIO_INT_HIGH_LEV	0x2
+#define GPIO_INT_RISE_EDGE 	0x0
+#define GPIO_INT_FALL_EDGE	0x1
+#define GPIO_INT_NONE		0x4
+
+/* fixed DMA request numbers */
+#define DMA_REQ_CSI_RX          31
+#define DMA_REQ_CSI_STAT        30
+#define DMA_REQ_UART1_TX        27
+#define DMA_REQ_UART1_RX        26
+#define DMA_REQ_UART2_TX        25
+#define DMA_REQ_UART2_RX        24
+#define DMA_REQ_UART3_TX        23
+#define DMA_REQ_UART3_RX        22
+#define DMA_REQ_UART4_TX        21
+#define DMA_REQ_UART4_RX        20
+#define DMA_REQ_CSPI1_TX        19
+#define DMA_REQ_CSPI1_RX        18
+#define DMA_REQ_CSPI2_TX        17
+#define DMA_REQ_CSPI2_RX        16
+#define DMA_REQ_SSI1_TX1        15
+#define DMA_REQ_SSI1_RX1        14
+#define DMA_REQ_SSI1_TX0        13
+#define DMA_REQ_SSI1_RX0        12
+#define DMA_REQ_SSI2_TX1        11
+#define DMA_REQ_SSI2_RX1        10
+#define DMA_REQ_SSI2_TX0        9
+#define DMA_REQ_SSI2_RX0        8
+#define DMA_REQ_SDHC1           7
+#define DMA_REQ_SDHC2           6
+#define DMA_REQ_EXT             3
+#define DMA_REQ_CSPI3_TX        2
+#define DMA_REQ_CSPI3_RX        1
+
+#endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index bbd848e004d..d6b0c472cd9 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -37,6 +37,10 @@
 # define cpu_is_mx27() (0)
 #endif
 
+#ifndef CONFIG_MACH_MX21
+# define cpu_is_mx21() (0)
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-- 
cgit v1.2.3


From aa3b0a6f57be50f1009a409e82731a8f9be80fc4 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Mon, 26 Jan 2009 16:34:54 +0100
Subject: arm/imx21: clock support for i.MX21

Based on code from "Martin Fuzzey" <mfuzzey@gmail.com>

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Makefile              |   2 +
 arch/arm/mach-mx2/clock_imx21.c         | 984 ++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/crm_regs.h            | 258 +++++++++
 arch/arm/plat-mxc/include/mach/common.h |   1 +
 4 files changed, 1245 insertions(+)
 create mode 100644 arch/arm/mach-mx2/clock_imx21.c
 create mode 100644 arch/arm/mach-mx2/crm_regs.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 382d86080e8..6e1a2bffc81 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -6,6 +6,8 @@
 
 obj-y	:=  system.o generic.o devices.o serial.o
 
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
new file mode 100644
index 00000000000..2dee5c87614
--- /dev/null
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -0,0 +1,984 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+		;
+	return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 64)
+		div = 64;
+
+	return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg =
+	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+				       (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
+
+	return 2UL * parent_rate / pdf;
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
+		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
+		>> CCM_PCDR0_NFCDIV_OFFSET;
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long external_high_reference; /* in Hz */
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz.
+ */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static unsigned long external_low_reference; /* in Hz */
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+
+static unsigned long _clk_fpm_recalc(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = _clk_fpm_recalc,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_MPCTL0);
+	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_fclk_get_rate(struct clk *clk)
+{
+	unsigned long parent_rate;
+	u32 div;
+
+	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+	parent_rate = clk_get_rate(clk->parent);
+
+	return parent_rate / (div+1);
+}
+
+static struct clk fclk_clk = {
+	.parent = &mpll_clk,
+	.get_rate = _clk_fclk_get_rate
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_spll_clk,
+	.enable = _clk_spll_enable,
+	.disable = _clk_spll_disable,
+};
+
+static unsigned long get_hclk_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long bclk_pdf;
+
+	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+		>> CCM_CSCR_BCLK_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static struct clk hclk_clk = {
+	.parent = &fclk_clk,
+	.get_rate = get_hclk_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long ipg_pdf;
+
+	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+	.parent = &hclk_clk,
+	.get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+	unsigned long perclk_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 2,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via lcd_clkc[1] */
+	}, {
+		.id = 3,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via csi_clk[1] */
+	},
+};
+
+static struct clk uart_ipg_clk[];
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[2],
+	}, {
+		.id = 3,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[3],
+	},
+};
+
+static struct clk uart_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART1_REG,
+		.enable_shift = CCM_PCCR_UART1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART2_REG,
+		.enable_shift = CCM_PCCR_UART2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART3_REG,
+		.enable_shift = CCM_PCCR_UART3_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART4_REG,
+		.enable_shift = CCM_PCCR_UART4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt_ipg_clk[];
+
+static struct clk gpt_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[2],
+	},
+};
+
+static struct clk gpt_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT1_REG,
+		.enable_shift = CCM_PCCR_GPT1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT2_REG,
+		.enable_shift = CCM_PCCR_GPT2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT3_REG,
+		.enable_shift = CCM_PCCR_GPT3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk pwm_clk[] = {
+	{
+		.parent = &per_clk[0],
+		.secondary = &pwm_clk[1],
+	}, {
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_PWM_REG,
+		.enable_shift = CCM_PCCR_PWM_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc_ipg_clk[];
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[1],
+	},
+};
+
+static struct clk sdhc_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC1_REG,
+		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC2_REG,
+		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi_ipg_clk[];
+
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[2],
+	},
+};
+
+static struct clk cspi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI1_REG,
+		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI2_REG,
+		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI3_REG,
+		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk lcdc_clk[] = {
+	{
+		.parent = &per_clk[2],
+		.secondary = &lcdc_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &ipg_clk,
+		.secondary = &lcdc_clk[2],
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_LCDC_REG,
+		.enable_shift = CCM_PCCR_LCDC_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk csi_clk[] = {
+	{
+		.parent = &per_clk[3],
+		.secondary = &csi_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
+		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk usb_clk[] = {
+	{
+		.parent = &spll_clk,
+		.get_rate = _clk_usb_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_USBOTG_REG,
+		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
+		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk ssi_ipg_clk[];
+
+static struct clk ssi_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[0],
+		.get_rate = _clk_ssi1_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[1],
+		.get_rate = _clk_ssi2_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk ssi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_REG,
+		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_REG,
+		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+
+static struct clk nfc_clk = {
+	.parent = &fclk_clk,
+	.get_rate = _clk_nfc_recalc,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_NFC_REG,
+	.enable_shift = CCM_PCCR_NFC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk dma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_DMA_REG,
+		.enable_shift = CCM_PCCR_DMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &dma_clk[1],
+	},  {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk brom_clk = {
+	.parent = &hclk_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
+	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk emma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_EMMA_REG,
+		.enable_shift = CCM_PCCR_EMMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &emma_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk slcdc_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SLCDC_REG,
+		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &slcdc_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk wdog_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_WDT_REG,
+	.enable_shift = CCM_PCCR_WDT_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_GPIO_REG,
+	.enable_shift = CCM_PCCR_GPIO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk i2c_clk = {
+	.id = 0,
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_I2C1_REG,
+	.enable_shift = CCM_PCCR_I2C1_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_KPP_REG,
+	.enable_shift = CCM_PCCR_KPP_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_OWIRE_REG,
+	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_RTC_REG,
+	.enable_shift = CCM_PCCR_RTC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 8)
+		div = 8;
+
+	return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR0);
+
+	if (clk->parent == &usb_clk[0]) {
+		reg &= ~CCM_PCDR0_48MDIV_MASK;
+		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
+	}
+	__raw_writel(reg, CCM_PCDR0);
+
+	return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+	u32 div = 0;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &usb_clk[0]) /* 48M */
+		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
+			 >> CCM_PCDR0_48MDIV_OFFSET;
+	div++;
+
+	return parent_rate / div;
+}
+
+static struct clk clko_clk;
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+	if (parent == &ckil_clk)
+		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fpm_clk)
+		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ckih_clk)
+		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == mpll_clk.parent)
+		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == spll_clk.parent)
+		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &mpll_clk)
+		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &spll_clk)
+		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fclk_clk)
+		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &hclk_clk)
+		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ipg_clk)
+		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[0])
+		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[1])
+		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[2])
+		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[3])
+		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[0])
+		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[1])
+		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &nfc_clk)
+		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &usb_clk[0])
+		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &clko_clk)
+		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, CCM_CCSR);
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.get_rate = _clk_clko_recalc,
+	.set_rate = _clk_clko_set_rate,
+	.round_rate = _clk_clko_round_rate,
+	.set_parent = _clk_clko_set_parent,
+};
+
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+/* It's unlikely that any driver wants one of them directly:
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
+	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
+	_REGISTER_CLOCK(NULL, "spll", spll_clk)
+	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
+	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
+	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
+*/
+	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
+	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
+	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
+	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
+	_REGISTER_CLOCK(NULL, "clko", clko_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
+	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
+	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
+	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+	_REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
+	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
+	_REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
+	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK(NULL, "owire", owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+};
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	int i;
+	u32 cscr;
+
+	external_low_reference = lref;
+	external_high_reference = href;
+
+	/* detect clock reference for both system PLL */
+	cscr = CSCR();
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &fpm_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &fpm_clk;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/* Turn off all clock gates */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
+
+	/* This turns of the serial PLL as well */
+	spll_clk.disable(&spll_clk);
+
+	/* This will propagate to all children and init all the clock rates. */
+	clk_enable(&per_clk[0]);
+	clk_enable(&gpio_clk);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+	clk_enable(&uart_clk[0]);
+#endif
+
+	mxc_timer_init(&gpt_clk[0]);
+	return 0;
+}
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
new file mode 100644
index 00000000000..749de76b3f9
--- /dev/null
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -0,0 +1,258 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
+
+#include <mach/hardware.h>
+
+/* Register offsets */
+#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+
+#define CCM_CSCR_PRESC_OFFSET   29
+#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET     26
+#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET      24
+#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES        (1 << 22)
+#define CCM_CSCR_MPLLRES        (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET    20
+#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET    19
+#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET    	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET   9
+#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           1
+
+
+
+#define CCM_MPCTL0_CPLM         (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET    26
+#define CCM_MPCTL0_PD_MASK      (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET   16
+#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET   10
+#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET   0
+#define CCM_MPCTL0_MFN_MASK     0x3ff
+
+#define CCM_MPCTL1_LF           (1 << 15)
+#define CCM_MPCTL1_BRMO         (1 << 6)
+
+#define CCM_SPCTL0_CPLM         (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET    26
+#define CCM_SPCTL0_PD_MASK      (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET   16
+#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET   10
+#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET   0
+#define CCM_SPCTL0_MFN_MASK     0x3ff
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET       16
+#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET        8
+#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET    0
+#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET         12
+#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET        24
+#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET        16
+#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET        8
+#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET        0
+#define CCM_PCDR1_PERDIV1_MASK          0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET       	31
+#define CCM_PCCR_HCLK_CSI_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET       	30
+#define CCM_PCCR_HCLK_DMA_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET      	28
+#define CCM_PCCR_HCLK_BROM_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET      	27
+#define CCM_PCCR_HCLK_EMMA_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET      	26
+#define CCM_PCCR_HCLK_LCDC_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET     	25
+#define CCM_PCCR_HCLK_SLCDC_REG	        CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET    	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET    	23
+#define CCM_PCCR_BMI_MASK          	(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG	    	CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET        	22
+#define CCM_PCCR_PERCLK4_REG	    	CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET          	21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET       20
+#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG	        CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET           	18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET      	17
+#define CCM_PCCR_SSI1_BAUD_REG	    	CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET      	16
+#define CCM_PCCR_SSI2_BAUD_REG	    	CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET           	15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET         	14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET            	13
+#define CCM_PCCR_DMA_REG            	CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET           	12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET           	11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET          	10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET          	9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET       	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET       	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET          	3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET          	2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET          	1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET          	0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET          	31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET            	30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET            	29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET            	28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET           	27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET           	26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET           	25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET            	24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK            	(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK            	(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK            	(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK              	(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK             	(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK             	(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK             	(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK             	(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK             	(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK         	(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK         	(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK        	(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK        	(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK       	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK      	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK             	(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK              	(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK             	(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK            	(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK          	(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK              	(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK              	(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK            	(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK            	(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK            	(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK        	(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK         	(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK        	(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK         	(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK            	(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK            	(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK            	(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK            	(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK           	(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK              	(1 << CCM_PCCR_WDT_OFFSET)
+
+
+#define CCM_CCSR_32KSR          (1 << 15)
+
+#define CCM_CCSR_CLKMODE1       (1 << 9)
+#define CCM_CCSR_CLKMODE0       (1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK   0x1f
+
+#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
+#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
+
+#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 2c08b8e14e3..3051eee9953 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -18,6 +18,7 @@ extern void mxc_map_io(void);
 extern void mxc_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk);
 extern int mx1_clocks_init(unsigned long fref);
+extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
-- 
cgit v1.2.3


From e48135519bd569eed374e0e17ed5233d4105fa97 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Mon, 26 Jan 2009 16:34:56 +0100
Subject: arm/imx21: Framebuffer support for i.MX21

This patch mimicks what Martin wrote on the mailing list:

* move arch/arm/mach-imx/include/mach/imxfb.h into
  arch/arm/mach-mxc/include/mach/imxfb.h
* changes Kconfig so that CONFIG_FB_IMX is selectable
* adds a platform device (copied from some pengutronix
  patches)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/include/mach/imxfb.h | 83 ----------------------------------
 arch/arm/mach-mx2/devices.c            | 33 ++++++++++++++
 arch/arm/mach-mx2/devices.h            |  2 +-
 arch/arm/plat-mxc/include/mach/imxfb.h | 83 ++++++++++++++++++++++++++++++++++
 4 files changed, 117 insertions(+), 84 deletions(-)
 delete mode 100644 arch/arm/mach-imx/include/mach/imxfb.h
 create mode 100644 arch/arm/plat-mxc/include/mach/imxfb.h

(limited to 'arch')

diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
deleted file mode 100644
index 870d0d93961..00000000000
--- a/arch/arm/mach-imx/include/mach/imxfb.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * This structure describes the machine which we are running on.
- */
-
-#define PCR_TFT		(1 << 31)
-#define PCR_COLOR	(1 << 30)
-#define PCR_PBSIZ_1	(0 << 28)
-#define PCR_PBSIZ_2	(1 << 28)
-#define PCR_PBSIZ_4	(2 << 28)
-#define PCR_PBSIZ_8	(3 << 28)
-#define PCR_BPIX_1	(0 << 25)
-#define PCR_BPIX_2	(1 << 25)
-#define PCR_BPIX_4	(2 << 25)
-#define PCR_BPIX_8	(3 << 25)
-#define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(4 << 25)
-#define PCR_PIXPOL	(1 << 24)
-#define PCR_FLMPOL	(1 << 23)
-#define PCR_LPPOL	(1 << 22)
-#define PCR_CLKPOL	(1 << 21)
-#define PCR_OEPOL	(1 << 20)
-#define PCR_SCLKIDLE	(1 << 19)
-#define PCR_END_SEL	(1 << 18)
-#define PCR_END_BYTE_SWAP (1 << 17)
-#define PCR_REV_VS	(1 << 16)
-#define PCR_ACD_SEL	(1 << 15)
-#define PCR_ACD(x)	(((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL	(1 << 7)
-#define PCR_SHARP	(1 << 6)
-#define PCR_PCD(x)	((x) & 0x3f)
-
-#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
-#define PWMR_LDMSK	(1 << 15)
-#define PWMR_SCR1	(1 << 10)
-#define PWMR_SCR0	(1 << 9)
-#define PWMR_CC_EN	(1 << 8)
-#define PWMR_PW(x)	((x) & 0xff)
-
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define DMACR_BURST	(1 << 31)
-#define DMACR_HM(x)	(((x) & 0xf) << 16)
-#define DMACR_TM(x)	((x) & 0xf)
-
-struct imx_fb_platform_data {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_int		nonstd;
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		pcr;
-	u_int		pwmr;
-	u_int		lscr1;
-	u_int		dmacr;
-
-	u_char * fixed_screen_cpu;
-	dma_addr_t fixed_screen_dma;
-
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
-};
-
-void set_imx_fb_info(struct imx_fb_platform_data *);
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 9ddd6d06105..07061e64454 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -228,6 +228,39 @@ struct platform_device mxc_nand_device = {
 	.resource = mxc_nand_resources,
 };
 
+#ifdef CONFIG_FB_IMX
+/*
+ * lcdc:
+ * - i.MX1: the basic controller
+ * - i.MX21: to be checked
+ * - i.MX27: like i.MX1, with slightly variations
+ */
+static struct resource mxc_fb[] = {
+	{
+		.start = LCDC_BASE_ADDR,
+		.end   = LCDC_BASE_ADDR + 0xFFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_LCDC,
+		.end   = MXC_INT_LCDC,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* mxc lcd driver */
+struct platform_device mxc_fb_device = {
+	.name = "imx-fb",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fb),
+	.resource = mxc_fb,
+	.dev = {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};
+
+#endif
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 1e8cb577a64..f4cb0ce29f1 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,4 +1,3 @@
-
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
 extern struct platform_device mxc_gpt3;
@@ -14,3 +13,4 @@ extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_fb_device;
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
new file mode 100644
index 00000000000..870d0d93961
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -0,0 +1,83 @@
+/*
+ * This structure describes the machine which we are running on.
+ */
+
+#define PCR_TFT		(1 << 31)
+#define PCR_COLOR	(1 << 30)
+#define PCR_PBSIZ_1	(0 << 28)
+#define PCR_PBSIZ_2	(1 << 28)
+#define PCR_PBSIZ_4	(2 << 28)
+#define PCR_PBSIZ_8	(3 << 28)
+#define PCR_BPIX_1	(0 << 25)
+#define PCR_BPIX_2	(1 << 25)
+#define PCR_BPIX_4	(2 << 25)
+#define PCR_BPIX_8	(3 << 25)
+#define PCR_BPIX_12	(4 << 25)
+#define PCR_BPIX_16	(4 << 25)
+#define PCR_PIXPOL	(1 << 24)
+#define PCR_FLMPOL	(1 << 23)
+#define PCR_LPPOL	(1 << 22)
+#define PCR_CLKPOL	(1 << 21)
+#define PCR_OEPOL	(1 << 20)
+#define PCR_SCLKIDLE	(1 << 19)
+#define PCR_END_SEL	(1 << 18)
+#define PCR_END_BYTE_SWAP (1 << 17)
+#define PCR_REV_VS	(1 << 16)
+#define PCR_ACD_SEL	(1 << 15)
+#define PCR_ACD(x)	(((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL	(1 << 7)
+#define PCR_SHARP	(1 << 6)
+#define PCR_PCD(x)	((x) & 0x3f)
+
+#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
+#define PWMR_LDMSK	(1 << 15)
+#define PWMR_SCR1	(1 << 10)
+#define PWMR_SCR0	(1 << 9)
+#define PWMR_CC_EN	(1 << 8)
+#define PWMR_PW(x)	((x) & 0xff)
+
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define DMACR_BURST	(1 << 31)
+#define DMACR_HM(x)	(((x) & 0xf) << 16)
+#define DMACR_TM(x)	((x) & 0xf)
+
+struct imx_fb_platform_data {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_int		nonstd;
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		pcr;
+	u_int		pwmr;
+	u_int		lscr1;
+	u_int		dmacr;
+
+	u_char * fixed_screen_cpu;
+	dma_addr_t fixed_screen_dma;
+
+	void (*lcd_power)(int);
+	void (*backlight_power)(int);
+};
+
+void set_imx_fb_info(struct imx_fb_platform_data *);
-- 
cgit v1.2.3


From 39d1dc068b61a8f36a3c1377fa52ed4901968a4f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 15 Jan 2009 16:14:27 +0000
Subject: mx31: Add device definitions for the i.MX3x I2C controllers

The i.MX I2C driver has not yet been merged into mainline but it is
near to that and the device defintions don't depend directly on it
so we can add the devices now.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 63 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index f8428800f28..c48a341bccf 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -180,3 +180,63 @@ struct platform_device mxc_nand_device = {
 	.num_resources = ARRAY_SIZE(mxc_nand_resources),
 	.resource = mxc_nand_resources,
 };
+
+static struct resource mxc_i2c0_resources[] = {
+	{
+		.start = I2C_BASE_ADDR,
+		.end = I2C_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_I2C,
+		.end = MXC_INT_I2C,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+	.resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+	{
+		.start = I2C2_BASE_ADDR,
+		.end = I2C2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_I2C2,
+		.end = MXC_INT_I2C2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+	.resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_i2c2_resources[] = {
+	{
+		.start = I2C3_BASE_ADDR,
+		.end = I2C3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MXC_INT_I2C3,
+		.end = MXC_INT_I2C3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_i2c_device2 = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
+	.resource = mxc_i2c2_resources,
+};
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 9949ef4e069..077a90226a7 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -6,3 +6,6 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
-- 
cgit v1.2.3


From 4d5f9cdacb74d35b4e435cb66443da203d8be6f0 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 15 Jan 2009 16:14:28 +0000
Subject: mx31ads: Fix build for missing mx31.h

Several of the macros in mx31ads.h depend on mx31.h which is no longer
included in quite so many standard headers as it once was. Include it
directly so we can build.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/board-mx31ads.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 451d510d08c..318c72ada13 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
 
+#include <mach/hardware.h>
+
 /* Base address of PBC controller */
 #define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
 /* Offsets for the PBC Controller register */
-- 
cgit v1.2.3


From 8b785b9dfb309be8d44d655df1f370b15dda7687 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 15 Jan 2009 16:14:29 +0000
Subject: mx31ads: Make unexported data static

Keeps sparse happy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31ads.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index f913999eedf..6804fbe266e 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -221,13 +221,13 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
 /*!
  * Set up static virtual mappings.
  */
-void __init mx31ads_map_io(void)
+static void __init mx31ads_map_io(void)
 {
 	mxc_map_io();
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
-void __init mx31ads_init_irq(void)
+static void __init mx31ads_init_irq(void)
 {
 	mxc_init_irq();
 	mx31ads_init_expio();
@@ -247,7 +247,7 @@ static void __init mx31ads_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer mx31ads_timer = {
+static struct sys_timer mx31ads_timer = {
 	.init	= mx31ads_timer_init,
 };
 
-- 
cgit v1.2.3


From e600eb6b0d41c3e69297137388733bd0a50aa5e9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Wed, 21 Jan 2009 21:25:03 +0100
Subject: fix warning "control reaches end of non-void function"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add a return 0 analogous to uart_mxc_port[0-2]_exit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Martin Fuzzey <mfuzzey@gmail.com>
---
 arch/arm/mach-mx2/mx27ads.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4548631eb3a..a078aa52a6a 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -135,6 +135,7 @@ static int uart_mxc_port3_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
 			ARRAY_SIZE(mxc_uart3_pins));
+	return 0;
 }
 
 static int mxc_uart4_pins[] = {
-- 
cgit v1.2.3


From 41a1d91e7e7b08a13d78e03e67dcd7634f2d5cca Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Wed, 21 Jan 2009 21:25:02 +0100
Subject: remove unused static function gpio_fec_inactive
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

... from both mx27ads.c and pcm038.c

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Martin Fuzzey <mfuzzey@gmail.com>
---
 arch/arm/mach-mx2/mx27ads.c | 6 ------
 arch/arm/mach-mx2/pcm038.c  | 6 ------
 2 files changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a078aa52a6a..3c967f460b3 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -209,12 +209,6 @@ static void gpio_fec_active(void)
 			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
-static void gpio_fec_inactive(void)
-{
-	mxc_gpio_release_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins));
-}
-
 static struct imxuart_platform_data uart_pdata[] = {
 	{
 		.init = uart_mxc_port0_init,
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 2942d59b570..58552a01c0d 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -183,12 +183,6 @@ static void gpio_fec_active(void)
 			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
-static void gpio_fec_inactive(void)
-{
-	mxc_gpio_release_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins));
-}
-
 static struct mxc_nand_platform_data pcm038_nand_board_info = {
 	.width = 1,
 	.hw_ecc = 1,
-- 
cgit v1.2.3


From b7222631c3d0fd26e6d85dd78b1d0aa10dc64929 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 28 Jan 2009 15:13:50 +0100
Subject: mx31: rework of iomux support

This new implemenatation avoids that two physical pins are claimed by
the same driver (also with the the gpr hardware modes).
The gpio kernel lib is also called when a capable gpio pin is assigned
its gpio function.
The mxc_iomux_mode function is still here for backward compatibility but
should not be used anymore.

V2:

In the precendent revision, the iomux code was claiming a pin when its
hardware mode was changed. This was uncorrect: when the hardware mode is
changed, the pin must still be claimed through the iomux.

In order to have a pin working in mode hw2, we must fist issue the
mxc_iomux_set_gpr call and then the corresponding mxc_iomux_mode calls
with the FUNC mode (usually done with mxc_iomux_setup_multiple_pins).
The reverse calls must be done to fee the pins.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/iomux.c                  | 88 ++++++++++++++++++++++++++++--
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 45 ++++++++++++---
 2 files changed, 122 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 7a5088b519a..40ffc5a664d 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -1,6 +1,7 @@
 /*
  * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -21,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/kernel.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/iomux-mx3.h>
@@ -38,6 +40,8 @@
 static DEFINE_SPINLOCK(gpio_mux_lock);
 
 #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
 /*
  * set the mode for a IOMUX pin.
  */
@@ -50,9 +54,6 @@ int mxc_iomux_mode(unsigned int pin_mode)
 	field = pin_mode & 0x3;
 	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
 
-	pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
-			__func__, (pin_mode & IOMUX_REG_MASK), field, mode);
-
 	spin_lock(&gpio_mux_lock);
 
 	l = __raw_readl(reg);
@@ -92,6 +93,86 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 }
 EXPORT_SYMBOL(mxc_iomux_set_pad);
 
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+	unsigned gpio;
+
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+	mxc_iomux_mode(pin);
+
+	/* if we have a gpio, we can allocate it */
+	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+	if (gpio < (GPIO_PORT_MAX + 1) * 32)
+		if (gpio_request(gpio, label))
+			return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		if (mxc_iomux_setup_pin(*p, label))
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+	unsigned gpio;
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+
+	gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+	if (gpio < (GPIO_PORT_MAX + 1) * 32)
+		gpio_free(gpio);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
 /*
  * This function enables/disables the general purpose function for a particular
  * signal.
@@ -111,4 +192,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
 	spin_unlock(&gpio_mux_lock);
 }
 EXPORT_SYMBOL(mxc_iomux_set_gpr);
-
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c9198c0aea1..4bdc4712be1 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -92,7 +92,7 @@ enum iomux_gp_func {
 	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
 	MUX_TAMPER_DETECT_EN		= 1 << 16,
 	MUX_PGP_USB_4WIRE		= 1 << 17,
-	MUX_PGB_USB_COMMON		= 1 << 18,
+	MUX_PGP_USB_COMMON		= 1 << 18,
 	MUX_SDHC_MEMSTICK1		= 1 << 19,
 	MUX_SDHC_MEMSTICK2		= 1 << 20,
 	MUX_PGP_SPLL_BYP		= 1 << 21,
@@ -109,21 +109,44 @@ enum iomux_gp_func {
 };
 
 /*
- * This function enables/disables the general purpose function for a particular
- * signal.
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
  */
-void iomux_config_gpr(enum iomux_gp_func , bool);
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label);
 
 /*
- * set the mode for a IOMUX pin.
+ * releases a single pin:
+ * 	- make it available for a future use by another driver
+ * 	- frees the GPIO if the pin was configured as GPIO
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
  */
-int mxc_iomux_mode(unsigned int);
+void mxc_iomux_release_pin(const unsigned int pin);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
 
 /*
  * This function enables/disables the general purpose function for a particular
  * signal.
  */
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
+
+/*
+ * This function only configures the iomux hardware.
+ * It is called by the setup functions and should not be called directly anymore.
+ * It is here visible for backward compatibility
+ */
+int mxc_iomux_mode(unsigned int pin_mode);
 
 #define IOMUX_PADNUM_MASK	0x1ff
 #define IOMUX_GPIONUM_SHIFT	9
@@ -143,6 +166,11 @@ void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
 	(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
 	MXC_GPIO_IRQ_START)
 
+/*
+ * The number of gpio devices among the pads
+ */
+#define GPIO_PORT_MAX 3
+
 /*
  * This enumeration is constructed based on the Section
  * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
@@ -480,6 +508,9 @@ enum iomux_pins {
 	MX31_PIN_CAPTURE	= IOMUX_PIN( 7,   327),
 };
 
+#define PIN_MAX 327
+#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
+
 /*
  * Convenience values for use with mxc_iomux_mode()
  *
-- 
cgit v1.2.3


From bfbc6a1fc1d4d4ecbf73bcb7eefcd2a2ca5ddf2a Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 28 Jan 2009 15:13:51 +0100
Subject: mx31moboard: use of new iomux implementation

This example takes advantage of the possibility to use tables of iomux
configs.
This is inspired from mx1-mx2 iomux code. It allows a better code
readability.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 3d2773e4bc8..f29c8782cff 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -63,6 +63,25 @@ static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
 
+static int mxc_uart0_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+static int mxc_uart1_pins[] = {
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2
+};
+static int mxc_uart4_pins[] = {
+	MX31_PIN_PC_RST__CTS5,
+	MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5,
+	MX31_PIN_PC_BVD1__RXD5
+};
+
 /*
  * Board specific initialization.
  */
@@ -70,25 +89,13 @@ static void __init mxc_board_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_CTS2__CTS2);
-	mxc_iomux_mode(MX31_PIN_RTS2__RTS2);
-	mxc_iomux_mode(MX31_PIN_TXD2__TXD2);
-	mxc_iomux_mode(MX31_PIN_RXD2__RXD2);
-
+	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_PC_RST__CTS5);
-	mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5);
-	mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5);
-	mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5);
-
+	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 }
 
-- 
cgit v1.2.3


From 945c10b87c4d72ac9ad392132d19d17f3ebdb310 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 28 Jan 2009 15:13:52 +0100
Subject: mx31ads: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31ads.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 6804fbe266e..7941db3caf6 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -94,13 +94,16 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
 static inline void mxc_init_imx_uart(void)
 {
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }
 #else /* !SERIAL_IMX */
@@ -176,7 +179,7 @@ static void __init mx31ads_init_expio(void)
 	/*
 	 * Configure INT line as GPIO input
 	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+	mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
 	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
-- 
cgit v1.2.3


From 63d976672e39176316b2a479464aa3aaf7c2a7fd Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 28 Jan 2009 15:13:53 +0100
Subject: mx31pdk: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31pdk.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index ac427edb4db..9108f157b76 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -45,13 +45,16 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
 static inline void mxc_init_imx_uart(void)
 {
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }
 
-- 
cgit v1.2.3


From bab389c8750d7f41f499517b308600f13bd2788d Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 28 Jan 2009 15:13:54 +0100
Subject: pcm037: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 3b5ba551cb1..18cda92432b 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -123,6 +123,18 @@ static struct platform_device *devices[] __initdata = {
 	&pcm037_sram_device,
 };
 
+static int uart0_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static int uart2_pins[] = {
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3
+};
+
 /*
  * Board specific initialization.
  */
@@ -130,24 +142,18 @@ static void __init mxc_board_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
-	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
-	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
-	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+	mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
-	mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
-
+	mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
 
-	mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
 	/* SMSC9215 IRQ pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+				"pcm037-eth"))
 		gpio_direction_input(MX31_PIN_GPIO3_1);
 
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-- 
cgit v1.2.3


From fe7316bff119a11e68f895ecf9a5a713ed30004c Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 15 Jan 2009 16:14:30 +0000
Subject: mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module

The i.MX31ADS supports pluggable PMU modules, including the WM835x based
Wolfson Microelectronics 1133-EV1. These boards provide power, audio,
RTC and watchdiog services to the system. This patch adds initial support
for those boards in I2C mode.

Currently support is limited by the available support for the features
of the i.MX31 in the mainline kernel.  Some further work will be needed
once other PMU modules are supported and once there is SPI support.
Many of the regulator constraints will be sharable with other PMU
boards.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Kconfig   |   9 ++
 arch/arm/mach-mx3/mx31ads.c | 294 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 303 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index e79659e8176..6fea5419632 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -8,6 +8,15 @@ config MACH_MX31ADS
 	  Include support for MX31ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
 config MACH_PCM037
 	bool "Support Phytec pcm037 platforms"
 	help
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 7941db3caf6..5c76ac5ba0f 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -22,6 +22,8 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
@@ -35,6 +37,12 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
 #include "devices.h"
 
 /*!
@@ -194,6 +202,291 @@ static void __init mx31ads_init_expio(void)
 	set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
 }
 
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_init_data sw1a_data = {
+	.constraints = {
+		.name = "SW1A",
+		.min_uV = 1275000,
+		.max_uV = 1600000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+				    REGULATOR_MODE_FAST,
+		.state_mem = {
+			 .uV = 1400000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+	.consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+	.constraints = {
+		.name = "VIOHO",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.state_mem = {
+			 .uV = 2800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+	.constraints = {
+		.name = "VIOLO",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+	.constraints = {
+		.name = "SW2A",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.state_disk = {
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 0,
+		 },
+		.always_on = 1,
+		.boot_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+static struct regulator_init_data ldo1_data = {
+	.constraints = {
+		.name = "VCAM/VMMC1/VMMC2",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+	},
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+	{
+		.supply = "AVDD",
+	},
+	{
+		.supply = "HPVDD",
+	},
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+	.constraints = {
+		.name = "VESIM/VSIM/AVDD",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+	.consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+	.constraints = {
+		.name = "VDIG",
+		.min_uV = 1500000,
+		.max_uV = 1500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+	.constraints = {
+		.name = "VRF1/CVDD_2.775",
+		.min_uV = 2500000,
+		.max_uV = 2500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+	.name            = "wm8350:white",
+	.default_trigger = "heartbeat",
+	.max_uA          = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+	.vmid_discharge_msecs = 1000,
+	.drain_msecs = 30,
+	.cap_discharge_msecs = 700,
+	.vmid_charge_msecs = 700,
+	.vmid_s_curve = WM8350_S_CURVE_SLOW,
+	.dis_out4 = WM8350_DISCHARGE_SLOW,
+	.dis_out3 = WM8350_DISCHARGE_SLOW,
+	.dis_out2 = WM8350_DISCHARGE_SLOW,
+	.dis_out1 = WM8350_DISCHARGE_SLOW,
+	.vroi_out4 = WM8350_TIE_OFF_500R,
+	.vroi_out3 = WM8350_TIE_OFF_500R,
+	.vroi_out2 = WM8350_TIE_OFF_500R,
+	.vroi_out1 = WM8350_TIE_OFF_500R,
+	.vroi_enable = 0,
+	.codec_current_on = WM8350_CODEC_ISEL_1_0,
+	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
+	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	/* Fix up for our own supplies. */
+	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
+		ldo2_consumers[i].dev = wm8350->dev;
+
+	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+	/* LEDs */
+	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+			       WM8350_ISINK_FLASH_DISABLE,
+			       WM8350_ISINK_FLASH_TRIG_BIT,
+			       WM8350_ISINK_FLASH_DUR_32MS,
+			       WM8350_ISINK_FLASH_ON_INSTANT,
+			       WM8350_ISINK_FLASH_OFF_INSTANT,
+			       WM8350_ISINK_FLASH_MODE_EN);
+	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+			       WM8350_ISINK_MODE_BOOST,
+			       WM8350_ISINK_ILIM_NORMAL,
+			       WM8350_DC5_RMP_20V,
+			       WM8350_DC5_FBSRC_ISINKA);
+	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+			    &wm8350_led_data);
+
+	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+	.init = mx31_wm8350_init,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+	{
+		I2C_BOARD_INFO("wm8350", 0x1a),
+		.platform_data = &mx31_wm8350_pdata,
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+	},
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+	i2c_register_board_info(1, mx31ads_i2c1_devices,
+				ARRAY_SIZE(mx31ads_i2c1_devices));
+
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+	mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
@@ -243,6 +536,7 @@ static void __init mxc_board_init(void)
 {
 	mxc_init_extuart();
 	mxc_init_imx_uart();
+	mxc_init_i2c();
 }
 
 static void __init mx31ads_timer_init(void)
-- 
cgit v1.2.3


From 879fea1b486d2b6fa399c40b8aed172b0dfdedb9 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 26 Jan 2009 17:26:02 +0100
Subject: [ARM] MX2: Add FEC platform device

The in kernel FEC driver has recently been ported to a platform driver.
Add a platform_device for it and register it for pcm038 and mx27ads.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 20 ++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  1 +
 arch/arm/mach-mx2/mx27ads.c |  1 +
 arch/arm/mach-mx2/pcm038.c  |  1 +
 4 files changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 07061e64454..684d5d92c2e 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -258,7 +258,27 @@ struct platform_device mxc_fb_device = {
 		.coherent_dma_mask = 0xFFFFFFFF,
 	},
 };
+#endif
 
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= FEC_BASE_ADDR,
+		.end	= FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_FEC,
+		.end	= MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
 #endif
 
 /* GPIO port description */
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index f4cb0ce29f1..d85d5b26c98 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -14,3 +14,4 @@ extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_nand_device;
 extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 3c967f460b3..4a3b097adc1 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -180,6 +180,7 @@ static int uart_mxc_port5_exit(struct platform_device *pdev)
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
+	&mxc_fec_device,
 };
 
 static int mxc_fec_pins[] = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 58552a01c0d..d246eb1bb3c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -191,6 +191,7 @@ static struct mxc_nand_platform_data pcm038_nand_board_info = {
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
 	&mxc_w1_master_device,
+	&mxc_fec_device,
 	&pcm038_sram_mtd_device,
 };
 
-- 
cgit v1.2.3


From c0b90a31efe30987ab4bb21298b410913779e62f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 15 Jan 2009 15:37:22 +0100
Subject: imxfb: add platform specific init/exit functions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/imxfb.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 870d0d93961..762a7b0430e 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,6 +76,9 @@ struct imx_fb_platform_data {
 	u_char * fixed_screen_cpu;
 	dma_addr_t fixed_screen_dma;
 
+	int (*init)(struct platform_device*);
+	int (*exit)(struct platform_device*);
+
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
 };
-- 
cgit v1.2.3


From 9db973a59b73fb5baf69f8b5d005daccec6d997e Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 15 Jan 2009 12:44:45 +0100
Subject: [ARM] pcm038: Add framebuffer support

Add framebuffer support for PCM038

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 70 +++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index a560cd6ad23..232e0416f15 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,9 +17,76 @@
  */
 
 #include <linux/platform_device.h>
-#include <mach/hardware.h>
+
 #include <asm/mach/arch.h>
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+static int mxc_fb_pins[] = {
+	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
+	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
+	PA13_PF_LD7,	PA14_PF_LD8,	PA15_PF_LD9,	PA16_PF_LD10,
+	PA17_PF_LD11,	PA18_PF_LD12,	PA19_PF_LD13,	PA20_PF_LD14,
+	PA21_PF_LD15,	PA22_PF_LD16,	PA23_PF_LD17,	PA24_PF_REV,
+	PA25_PF_CLS,	PA26_PF_PS,	PA27_PF_SPL_SPR, PA28_PF_HSYNC,
+	PA29_PF_VSYNC,	PA30_PF_CONTRAST, PA31_PF_OE_ACD
+};
+
+static int pcm038_fb_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
+			ARRAY_SIZE(mxc_fb_pins), "FB");
+}
+
+static int pcm038_fb_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
+
+	return 0;
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DH06
+ */
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.pixclock	= 188679, /* in ps (5.3MHz) */
+	.xres		= 240,
+	.yres		= 320,
+
+	.bpp		= 16,
+	.hsync_len	= 7,
+	.left_margin	= 5,
+	.right_margin	= 16,
+
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+	.fixed_screen_cpu = 0,
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock not inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pcr		= 0xFA0080C0,
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.init = pcm038_fb_init,
+	.exit = pcm038_fb_exit,
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -28,4 +95,5 @@
  */
 void __init pcm970_baseboard_init(void)
 {
+	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 }
-- 
cgit v1.2.3


From 166091b1894df3de736f43c649f2e6639f4a31ac Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 16 Jan 2009 15:17:16 +0100
Subject: [ARM] MXC: add pwm driver for i.MX SoCs

This driver has been tested on MX27/MX31. It should work on MX1/MX1
aswell, but the actual setting of the PWM is missing so far.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/Kconfig  |   6 +
 arch/arm/plat-mxc/Makefile |   1 +
 arch/arm/plat-mxc/pwm.c    | 300 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 307 insertions(+)
 create mode 100644 arch/arm/plat-mxc/pwm.c

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 10f65bf27b2..71c3c848b0e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -44,4 +44,10 @@ config MXC_IRQ_PRIOR
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
 
+config MXC_PWM
+	tristate "Enable PWM driver"
+	depends on ARCH_MXC
+	help
+	  Enable support for the i.MX PWM controller(s).
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index db74a929179..f204192f9b9 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,3 +7,4 @@ obj-y := irq.o clock.o gpio.o time.o devices.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_MXC_PWM)  += pwm.o
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
new file mode 100644
index 00000000000..9bffbc507cc
--- /dev/null
+++ b/arch/arm/plat-mxc/pwm.c
@@ -0,0 +1,300 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
+#define PWM_VER_1
+
+#define PWMCR	0x00	/* PWM Control Register		*/
+#define PWMSR	0x04	/* PWM Sample Register		*/
+#define PWMPR	0x08	/* PWM Period Register		*/
+#define PWMCNR	0x0C	/* PWM Counter Register		*/
+
+#define PWMCR_HCTR		(1 << 18)		/* Halfword FIFO Data Swapping	*/
+#define PWMCR_BCTR		(1 << 17)		/* Byte FIFO Data Swapping	*/
+#define PWMCR_SWR		(1 << 16)		/* Software Reset		*/
+#define PWMCR_CLKSRC_PERCLK	(0 << 15)		/* PERCLK Clock Source		*/
+#define PWMCR_CLKSRC_CLK32	(1 << 15)		/* 32KHz Clock Source		*/
+#define PWMCR_PRESCALER(x)	(((x - 1) & 0x7F) << 8)	/* PRESCALER			*/
+#define PWMCR_IRQ		(1 << 7)		/* Interrupt Request		*/
+#define PWMCR_IRQEN		(1 << 6)		/* Interrupt Request Enable	*/
+#define PWMCR_FIFOAV		(1 << 5)		/* FIFO Available		*/
+#define PWMCR_EN		(1 << 4)		/* Enables/Disables the PWM	*/
+#define PWMCR_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
+#define PWMCR_DIV(x)		(((x) & 0x03) << 0)	/* Clock divider 2/4/8/16	*/
+
+#define MAX_DIV			(128 * 16)
+#endif
+
+#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
+#define PWM_VER_2
+
+#define PWMCR	0x00	/* PWM Control Register		*/
+#define PWMSR	0x04	/* PWM Status Register		*/
+#define PWMIR	0x08	/* PWM Interrupt Register	*/
+#define PWMSAR	0x0C	/* PWM Sample Register		*/
+#define PWMPR	0x10	/* PWM Period Register		*/
+#define PWMCNR	0x14	/* PWM Counter Register		*/
+
+#define PWMCR_EN		(1 << 0)		/* Enables/Disables the PWM	*/
+#define PWMCR_REPEAT(x)		(((x) & 0x03) << 1)	/* Sample Repeats		*/
+#define PWMCR_SWR		(1 << 3)		/* Software Reset		*/
+#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)/* PRESCALER			*/
+#define PWMCR_CLKSRC(x)		(((x) & 0x3) << 16)
+#define PWMCR_CLKSRC_OFF	(0 << 16)
+#define PWMCR_CLKSRC_IPG	(1 << 16)
+#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
+#define PWMCR_CLKSRC_CLK32	(3 << 16)
+#define PWMCR_POUTC
+#define PWMCR_HCTR		(1 << 20)		/* Halfword FIFO Data Swapping	*/
+#define PWMCR_BCTR		(1 << 21)		/* Byte FIFO Data Swapping	*/
+#define PWMCR_DBGEN		(1 << 22)		/* Debug Mode			*/
+#define PWMCR_WAITEN		(1 << 23)		/* Wait Mode			*/
+#define PWMCR_DOZEN		(1 << 24)		/* Doze Mode			*/
+#define PWMCR_STOPEN		(1 << 25)		/* Stop Mode			*/
+#define PWMCR_FWM(x)		(((x) & 0x3) << 26)	/* FIFO Water Mark		*/
+
+#define MAX_DIV 4096
+#endif
+
+#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
+#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
+#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
+
+struct pwm_device {
+	struct list_head	node;
+	struct platform_device *pdev;
+
+	const char	*label;
+	struct clk	*clk;
+
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+
+	unsigned int	use_count;
+	unsigned int	pwm_id;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles, prescale;
+
+	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	c = clk_get_rate(pwm->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	prescale = period_cycles / 0x10000 + 1;
+
+	period_cycles /= prescale;
+	c = (unsigned long long)period_cycles * duty_ns;
+	do_div(c, period_ns);
+	duty_cycles = c;
+
+#ifdef PWM_VER_2
+	writel(duty_cycles, pwm->mmio_base + PWMSAR);
+	writel(period_cycles, pwm->mmio_base + PWMPR);
+	writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
+			pwm->mmio_base + PWMCR);
+#elif defined PWM_VER_1
+#error PWM not yet working on MX1 / MX21
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	int rc = 0;
+
+	if (!pwm->clk_enabled) {
+		rc = clk_enable(pwm->clk);
+		if (!rc)
+			pwm->clk_enabled = 1;
+	}
+	return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	if (pwm->clk_enabled) {
+		clk_disable(pwm->clk);
+		pwm->clk_enabled = 0;
+	}
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, node) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count++;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		pr_warning("PWM device already freed\n");
+
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static int __devinit mxc_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	pwm->clk = clk_get(&pdev->dev, "pwm");
+
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+
+	pwm->clk_enabled = 0;
+
+	pwm->use_count = 0;
+	pwm->pwm_id = pdev->id;
+	pwm->pdev = pdev;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	if (pwm->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->node, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+err_free_mem:
+	release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ret;
+}
+
+static int __devexit mxc_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+
+	pwm = platform_get_drvdata(pdev);
+	if (pwm == NULL)
+		return -ENODEV;
+
+	mutex_lock(&pwm_lock);
+	list_del(&pwm->node);
+	mutex_unlock(&pwm_lock);
+
+	iounmap(pwm->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, r->end - r->start + 1);
+
+	clk_put(pwm->clk);
+
+	kfree(pwm);
+	return 0;
+}
+
+static struct platform_driver mxc_pwm_driver = {
+	.driver		= {
+		.name	= "mxc_pwm",
+	},
+	.probe		= mxc_pwm_probe,
+	.remove		= __devexit_p(mxc_pwm_remove),
+};
+
+static int __init mxc_pwm_init(void)
+{
+	return platform_driver_register(&mxc_pwm_driver);
+}
+arch_initcall(mxc_pwm_init);
+
+static void __exit mxc_pwm_exit(void)
+{
+	platform_driver_unregister(&mxc_pwm_driver);
+}
+module_exit(mxc_pwm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+
-- 
cgit v1.2.3


From 824b16e66b70f5df61345f5708c149f6886eef30 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 16 Jan 2009 15:17:46 +0100
Subject: [ARM] MX2: add pwm device/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 20 ++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  1 +
 2 files changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 684d5d92c2e..bef418e0e60 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -281,6 +281,26 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
+static struct resource mxc_pwm_resources[] = {
+	[0] = {
+		.start	= PWM_BASE_ADDR,
+		.end	= PWM_BASE_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start   = MXC_INT_PWM,
+		.end     = MXC_INT_PWM,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
+	.resource = mxc_pwm_resources
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index d85d5b26c98..94a241419af 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -15,3 +15,4 @@ extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mxc_nand_device;
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
-- 
cgit v1.2.3


From c5d4dbff965b77b39c0188e4146892d76c775a98 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 28 Jan 2009 13:26:56 +0100
Subject: [ARM] MX2: Add I2C devices / resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  2 ++
 2 files changed, 44 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index bef418e0e60..7d12c2c4108 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -281,6 +281,48 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
+static struct resource mxc_i2c_1_resources[] = {
+	[0] = {
+		.start	= I2C_BASE_ADDR,
+		.end	= I2C_BASE_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= MXC_INT_I2C,
+		.end	= MXC_INT_I2C,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+	.resource = mxc_i2c_1_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_i2c_2_resources[] = {
+	[0] = {
+		.start	= I2C2_BASE_ADDR,
+		.end	= I2C2_BASE_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= MXC_INT_I2C2,
+		.end	= MXC_INT_I2C2,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+	.resource = mxc_i2c_2_resources
+};
+#endif
+
 static struct resource mxc_pwm_resources[] = {
 	[0] = {
 		.start	= PWM_BASE_ADDR,
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 94a241419af..271ab1e6982 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -16,3 +16,5 @@ extern struct platform_device mxc_nand_device;
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
-- 
cgit v1.2.3


From a4e9a65a1f90e94eca3af1a69b42d039054ef9de Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 28 Jan 2009 13:07:11 +0100
Subject: [ARM] PCM038 board: Add I2C support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index d246eb1bb3c..7d935e17aa1 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,11 +21,17 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
 #include <asm/mach/time.h>
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
@@ -204,6 +210,51 @@ static void __init pcm038_init_sram(void)
 	__raw_writel(0x22220a00, CSCR_A(1));
 }
 
+#ifdef CONFIG_I2C_IMX
+static int mxc_i2c1_pins[] = {
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL
+};
+
+static int pcm038_i2c_1_init(struct device *dev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
+			"I2C1");
+}
+
+static void pcm038_i2c_1_exit(struct device *dev)
+{
+	mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
+}
+
+static struct imxi2c_platform_data pcm038_i2c_1_data = {
+	.bitrate = 100000,
+	.init = pcm038_i2c_1_init,
+	.exit = pcm038_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+	[0] = {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	},
+	[1] = {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	},
+	[2] = {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+#endif
+
 static void __init pcm038_init(void)
 {
 	gpio_fec_active();
@@ -216,6 +267,14 @@ static void __init pcm038_init(void)
 	mxc_gpio_mode(PE16_AF_OWIRE);
 	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
+#ifdef CONFIG_I2C_IMX
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pcm038_i2c_devices,
+				ARRAY_SIZE(pcm038_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+#endif
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
-- 
cgit v1.2.3


From b8b19b0d1c2d9ede8a3f8b9f609fd66cf5ede057 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 28 Jan 2009 14:06:20 +0100
Subject: [ARM] mx1ads: add I2C support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/mx1ads.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 09dc77bb481..89738fe576b 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -16,6 +16,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,6 +26,10 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
+#include <mach/irqs.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
 #include <mach/iomux.h>
 #include "devices.h"
 
@@ -103,6 +109,55 @@ static struct platform_device flash_device = {
 	.num_resources = 1,
 };
 
+/*
+ * I2C
+ */
+
+#ifdef CONFIG_I2C_IMX
+static int i2c_pins[] = {
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+};
+
+static int i2c_init(struct device *dev)
+{
+	return mxc_gpio_setup_multiple_pins(i2c_pins,
+			ARRAY_SIZE(i2c_pins), "I2C");
+}
+
+static void i2c_exit(struct device *dev)
+{
+	mxc_gpio_release_multiple_pins(i2c_pins,
+			ARRAY_SIZE(i2c_pins));
+}
+
+static struct pcf857x_platform_data pcf857x_data[] = {
+	{
+		.gpio_base = 4 * 32,
+	}, {
+		.gpio_base = 4 * 32 + 16,
+	}
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+	.bitrate = 100000,
+	.init = i2c_init,
+	.exit = i2c_exit,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf857x", 0x22),
+		.type = "pcf8575",
+		.platform_data = &pcf857x_data[0],
+	}, {
+		I2C_BOARD_INFO("pcf857x", 0x24),
+		.type = "pcf8575",
+		.platform_data = &pcf857x_data[1],
+	},
+};
+#endif
+
 /*
  * Board init
  */
@@ -114,6 +169,14 @@ static void __init mx1ads_init(void)
 
 	/* Physmap flash */
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+	/* I2C */
+#ifdef CONFIG_I2C_IMX
+	i2c_register_board_info(0, mx1ads_i2c_devices,
+				ARRAY_SIZE(mx1ads_i2c_devices));
+
+	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+#endif
 }
 
 static void __init mx1ads_timer_init(void)
-- 
cgit v1.2.3


From c2aaac70cd00cf5d4687cc35f462e3888c9ac76f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 28 Jan 2009 17:11:02 +0100
Subject: [ARM] iommux mx3: Add pin definitions for I2C

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 4bdc4712be1..a38aa8510cb 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -538,7 +538,9 @@ enum iomux_pins {
 #define MX31_PIN_CSPI1_SS1__SS1		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI1_SS2__SS2		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI2_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MOSI__SCL	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI2_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MISO__SDA	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI2_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI2_SS0__SS0		IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
-- 
cgit v1.2.3


From 792067507b8bf5eaf220ee6994423381b7ae5c0b Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 28 Jan 2009 17:10:32 +0100
Subject: [ARM] PCM037 Board: Add I2C support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 18cda92432b..a05e37b731b 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -26,6 +26,8 @@
 #include <linux/gpio.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,6 +39,9 @@
 #include <mach/iomux-mx3.h>
 #include <mach/board-pcm037.h>
 #include <mach/mxc_nand.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
 
 #include "devices.h"
 
@@ -117,6 +122,46 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
+#ifdef CONFIG_I2C_IMX
+static int i2c_1_pins[] = {
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+static int pcm037_i2c_1_init(struct device *dev)
+{
+	return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
+			"i2c-1");
+}
+
+static void pcm037_i2c_1_exit(struct device *dev)
+{
+	mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
+}
+
+static struct imxi2c_platform_data pcm037_i2c_1_data = {
+	.bitrate = 100000,
+	.init = pcm037_i2c_1_init,
+	.exit = pcm037_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563",
+	}
+};
+#endif
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_eth,
@@ -156,6 +201,12 @@ static void __init mxc_board_init(void)
 				"pcm037-eth"))
 		gpio_direction_input(MX31_PIN_GPIO3_1);
 
+#ifdef CONFIG_I2C_IMX
+	i2c_register_board_info(1, pcm037_i2c_devices,
+			ARRAY_SIZE(pcm037_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+#endif
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 }
 
-- 
cgit v1.2.3


From 2420563227897ed3900606e720f886e122944d2c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 28 Jan 2009 17:36:37 +0100
Subject: [ARM] Add Synertronixx scb9328 board support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/Kconfig   |   4 ++
 arch/arm/mach-mx1/Makefile  |   1 +
 arch/arm/mach-mx1/scb9328.c | 160 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 arch/arm/mach-mx1/scb9328.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
index 2b59fc74784..f86cfcb6022 100644
--- a/arch/arm/mach-mx1/Kconfig
+++ b/arch/arm/mach-mx1/Kconfig
@@ -11,4 +11,8 @@ config ARCH_MX1ADS
 	help
 	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
 endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index b969719011f..82f1309568e 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -8,3 +8,4 @@ obj-y			+= generic.o clock.o devices.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
new file mode 100644
index 00000000000..0e71f3fa28b
--- /dev/null
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/arm/mach-mx1/scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device scb_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &scb_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+	[0] = {
+		.name	= "address area",
+		.start	= IMX_CS5_PHYS,
+		.end	= IMX_CS5_PHYS + 1,
+		.flags	= IORESOURCE_MEM	/* address access */
+	},
+	[1] = {
+		.name	= "data area",
+		.start	= IMX_CS5_PHYS + 4,
+		.end	= IMX_CS5_PHYS + 5,
+		.flags	= IORESOURCE_MEM	/* data access */
+	},
+	[2] = {
+		.start	= IRQ_GPIOC(3),
+		.end	= IRQ_GPIOC(3),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000x_resources),
+	.resource	= dm9000x_resources,
+	.dev		= {
+		.platform_data = &dm9000_platdata,
+	}
+};
+
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+	.init = uart1_mxc_init,
+	.exit = uart1_mxc_exit,
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&scb_flash_device,
+	&dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+	mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+	printk(KERN_INFO"Scb9328: Adding devices\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+	.init	= scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+    /* Sascha Hauer */
+	.phys_io	= 0x00200000,
+	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.boot_params	= 0x08000100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &scb9328_timer,
+	.init_machine	= scb9328_init,
+MACHINE_END
-- 
cgit v1.2.3


From 87bbb19721fbd6b5e556105c188da80d06f738b1 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 29 Jan 2009 16:00:23 +0100
Subject: [ARM] mxc: add missing include

include devices.h from devices.c to avoid inconsistencies and to fix
sparse warnings

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/devices.c | 2 ++
 arch/arm/mach-mx3/devices.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index cea8f2c7119..97f42d96d7a 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -26,6 +26,8 @@
 #include <mach/irqs.h>
 #include <mach/hardware.h>
 
+#include "devices.h"
+
 static struct resource imx_csi_resources[] = {
 	[0] = {
 		.start  = 0x00224000,
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index c48a341bccf..7cfdef0aad4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,6 +25,8 @@
 #include <mach/irqs.h>
 #include <mach/imx-uart.h>
 
+#include "devices.h"
+
 static struct resource uart0[] = {
 	{
 		.start = UART1_BASE_ADDR,
-- 
cgit v1.2.3


From 6bbdbf2f95771c0a2dbccc423b99b37fde9a5078 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Thu, 29 Jan 2009 14:42:25 +0100
Subject: arm/imx: Kconfig beautification

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/Kconfig |  3 ++-
 arch/arm/mach-mx2/Kconfig | 13 +++++--------
 arch/arm/mach-mx3/Kconfig |  8 ++++----
 arch/arm/plat-mxc/Kconfig |  2 +-
 4 files changed, 12 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
index f86cfcb6022..eb7660f5d4b 100644
--- a/arch/arm/mach-mx1/Kconfig
+++ b/arch/arm/mach-mx1/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MX1
 
-comment "MX1 Platforms"
+comment "MX1 platforms:"
 
 config MACH_MXLADS
 	bool
@@ -15,4 +15,5 @@ config MACH_SCB9328
 	bool "Synertronixx scb9328"
 	help
 	  Say Y here if you are using a Synertronixx scb9328 board
+
 endif
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 412d2d55b08..42a788842f4 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -1,27 +1,22 @@
-comment "MX2 family CPU support"
-	depends on ARCH_MX2
+if ARCH_MX2
 
 choice
-	prompt "MX2 Type"
-	depends on ARCH_MX2
+	prompt "CPUs:"
 	default MACH_MX21
 
 config MACH_MX21
 	bool "i.MX21 support"
-	depends on ARCH_MX2
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
-	depends on ARCH_MX2
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
 endchoice
 
-comment "MX2 Platforms"
-	depends on ARCH_MX2
+comment "MX2 platforms:"
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
@@ -50,3 +45,5 @@ config MACH_PCM970_BASEBOARD
 	  PCM970 evaluation board.
 
 endchoice
+
+endif
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 6fea5419632..6933d2d0b56 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,5 +1,6 @@
-menu "MX3 Options"
-	depends on ARCH_MX3
+if ARCH_MX3
+
+comment "MX3 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
@@ -44,5 +45,4 @@ config MACH_MX31MOBOARD
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endmenu
-
+endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 71c3c848b0e..ed5ab8ed7cf 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -3,7 +3,7 @@ if ARCH_MXC
 menu "Freescale MXC Implementations"
 
 choice
-	prompt "MXC/iMX Base Type"
+	prompt "Freescale CPU family:"
 	default ARCH_MX3
 
 config ARCH_MX1
-- 
cgit v1.2.3


From 999981d943e626bff5d031de1bf06435afb10ced Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lg@denx.de>
Date: Thu, 12 Feb 2009 14:27:22 +0100
Subject: mxc: first set GPIO level, then switch direction to output

Make sure not to create spurious pulses on GPIOs, when configuring them as
output: first set required level, then switch direction.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index ccbd94adc66..c6483bad8a2 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -200,8 +200,8 @@ static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 static int mxc_gpio_direction_output(struct gpio_chip *chip,
 				     unsigned offset, int value)
 {
-	_set_gpio_direction(chip, offset, 1);
 	mxc_gpio_set(chip, offset, value);
+	_set_gpio_direction(chip, offset, 1);
 	return 0;
 }
 
-- 
cgit v1.2.3


From e180a5c26fae12dcc02244df68a6089cd5522df7 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 11 Feb 2009 16:55:17 +0100
Subject: mx31: add pin definition for LCD

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index a38aa8510cb..ab838cfe94f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -558,6 +558,33 @@ enum iomux_pins {
 #define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD0__LD0		IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD1__LD1		IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD2__LD2		IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD3__LD3		IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD4__LD4		IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD5__LD5		IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD6__LD6		IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD7__LD7		IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD8__LD8		IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD9__LD9		IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD10__LD10		IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD11__LD11		IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD12__LD12		IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD13__LD13		IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD14__LD14		IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD15__LD15		IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD16__LD16		IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD17__LD17		IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_VSYNC3__VSYNC3		IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_HSYNC__HSYNC		IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_FPSHIFT__FPSHIFT	IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DRDY0__DRDY0		IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_REV__D3_REV		IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From e00f0b4a9316c9de000697e489f6102271e94dc4 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 16 Feb 2009 12:47:51 +0100
Subject: mx31moboard: initial support for various baseboards

This enables our mx31moboard to be used on the different baseboards that
we are developping according to the application needs. There are not
many differences between the boards for now, but when other peripherals
are available for mx31 the differences are going to grow.

v2: takes Sascha's comments into account

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Makefile                         |  3 +-
 arch/arm/mach-mx3/mx31moboard-devboard.c           | 48 ++++++++++++++++++++++
 arch/arm/mach-mx3/mx31moboard-marxbot.c            | 37 +++++++++++++++++
 arch/arm/mach-mx3/mx31moboard.c                    | 39 ++++++++++--------
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h | 45 ++++++++++++++++++++
 5 files changed, 154 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/mach-mx3/mx31moboard-devboard.c
 create mode 100644 arch/arm/mach-mx3/mx31moboard-marxbot.c
 create mode 100644 arch/arm/plat-mxc/include/mach/board-mx31moboard.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5a151540fe8..d50d9878a65 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
+				   mx31moboard-marxbot.o
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
new file mode 100644
index 00000000000..d080b4add79
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mxc_uart1_pins[] = {
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+};
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_devboard_init(void)
+{
+	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
+	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
new file mode 100644
index 00000000000..9ef9566823f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_marxbot_init(void)
+{
+	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index f29c8782cff..2d51739e24b 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -32,6 +32,7 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
 
 #include "devices.h"
 
@@ -64,24 +65,17 @@ static struct platform_device *devices[] __initdata = {
 };
 
 static int mxc_uart0_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-static int mxc_uart1_pins[] = {
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2
+	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
 };
 static int mxc_uart4_pins[] = {
-	MX31_PIN_PC_RST__CTS5,
-	MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5,
-	MX31_PIN_PC_BVD1__RXD5
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
 };
 
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
 /*
  * Board specific initialization.
  */
@@ -92,11 +86,22 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
-	mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
 	mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+
+	switch (mx31moboard_baseboard) {
+	case MX31NOBOARD:
+		break;
+	case MX31DEVBOARD:
+		mx31moboard_devboard_init();
+		break;
+	case MX31MARXBOT:
+		mx31moboard_marxbot_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+	}
+
 }
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
new file mode 100644
index 00000000000..f8aef1babb7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31moboard_boards {
+	MX31NOBOARD	= 0,
+	MX31DEVBOARD	= 1,
+	MX31MARXBOT	= 2,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31moboard_devboard_init(void);
+extern void mx31moboard_marxbot_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
-- 
cgit v1.2.3


From ca489f8e4ac1127e6aee1ffcdaea29858f89506c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 16 Feb 2009 12:47:52 +0100
Subject: mx31: add dma and fb devices

This adds the dma (ipu_dma) and fb devices for the mx31 for which drivers now are
available.

v2: merge the ipu and fb device in the same patch as suggested by Sascha

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c     | 48 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h     |  2 ++
 arch/arm/mach-mx3/mx31moboard.c |  1 -
 3 files changed, 50 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 7cfdef0aad4..b7d4900b02e 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -242,3 +242,51 @@ struct platform_device mxc_i2c_device2 = {
 	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
 	.resource = mxc_i2c2_resources,
 };
+
+/* i.MX31 Image Processing Unit */
+
+/* The resource order is important! */
+static struct resource mx3_ipu_rsrc[] = {
+	{
+		.start = IPU_CTRL_BASE_ADDR,
+		.end = IPU_CTRL_BASE_ADDR + 0x5F,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IPU_CTRL_BASE_ADDR + 0x88,
+		.end = IPU_CTRL_BASE_ADDR + 0xB3,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_IPU_SYN,
+		.end = MXC_INT_IPU_SYN,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC_INT_IPU_ERR,
+		.end = MXC_INT_IPU_ERR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx3_ipu = {
+	.name = "ipu-core",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
+	.resource = mx3_ipu_rsrc,
+};
+
+static struct resource fb_resources[] = {
+	{
+		.start	= IPU_CTRL_BASE_ADDR + 0xB4,
+		.end	= IPU_CTRL_BASE_ADDR + 0x1BF,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mx3_fb = {
+	.name		= "mx3_sdc_fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fb_resources),
+	.resource	= fb_resources,
+	.dev		= {
+		.coherent_dma_mask = 0xffffffff,
+       },
+};
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 077a90226a7..d1638518a9d 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -9,3 +9,5 @@ extern struct platform_device mxc_nand_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx3_ipu;
+extern struct platform_device mx3_fb;
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2d51739e24b..b30460a2a55 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -101,7 +101,6 @@ static void __init mxc_board_init(void)
 	default:
 		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
 	}
-
 }
 
 /*
-- 
cgit v1.2.3


From c0a5f85523132dc893916d6059370233fac1cb11 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 2 Feb 2009 14:11:54 +0100
Subject: [ARM] MX35: Add register definitions for the i.MX35

This patch moves the stuff common to i.MX31 and i.MX35 to mx3x.h and the
specifics to mx31.h/mx35.h. We can build a kernel which runs on i.MX31 and
i.MX35, so always include mx31.h and mx35.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/hardware.h |   4 +-
 arch/arm/plat-mxc/include/mach/mx31.h     | 329 +-----------------------------
 arch/arm/plat-mxc/include/mach/mx35.h     |  29 +++
 arch/arm/plat-mxc/include/mach/mx3x.h     | 290 ++++++++++++++++++++++++++
 4 files changed, 329 insertions(+), 323 deletions(-)
 create mode 100644 arch/arm/plat-mxc/include/mach/mx35.h
 create mode 100644 arch/arm/plat-mxc/include/mach/mx3x.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 11f5727ea44..42e4ee37ca1 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -23,7 +23,9 @@
 #include <asm/sizes.h>
 
 #ifdef CONFIG_ARCH_MX3
-# include <mach/mx31.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
 #endif
 
 #ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index de026654b00..0b06941b613 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,360 +1,45 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*
- * MX31 memory map:
- *
- * Virt		Phys		Size	What
- * ---------------------------------------------------------------------------
- * F8000000	1FFC0000	16K	IRAM
- * F9000000	30000000	256M	L2CC
- * FC000000	43F00000	1M	AIPS 1
- * FC100000	50000000	1M	SPBA
- * FC200000	53F00000	1M	AIPS 2
- * FC500000	60000000	128M	ROMPATCH
- * FC400000	68000000	128M	AVIC
- *         	70000000	256M	IPU (MAX M2)
- *         	80000000	256M	CSD0 SDRAM/DDR
- *         	90000000	256M	CSD1 SDRAM/DDR
- *         	A0000000	128M	CS0 Flash
- *         	A8000000	128M	CS1 Flash
- *         	B0000000	32M	CS2
- *         	B2000000	32M	CS3
- * F4000000	B4000000	32M	CS4
- *         	B6000000	32M	CS5
- * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
- *         	C0000000	64M	PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
 /*
  * IRAM
  */
-#define IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
-#define IRAM_BASE_ADDR_VIRT	0xF8000000
-#define IRAM_SIZE		SZ_16K
-
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_BASE_ADDR_VIRT	0xF9000000
-#define L2CC_SIZE		SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
+#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_SIZE			SZ_16K
 
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
 #define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
 
 #define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
 #define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
 #define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
 #define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
 
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
 #define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
 #define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
 #define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
 #define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
 #define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
-
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
-
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
 
-#define NFC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
 
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __iomem *) \
-	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
-	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
-	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
-	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
-	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
-	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
-	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
-	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x)  \
-	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x)  \
-	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x)  \
-	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x)  \
-	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x)  \
-	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x)  \
-	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)  \
-	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843	0
-#define MXC_INT_RESV1		1
-#define MXC_INT_CS8900A		2
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
 #define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_RTIC		6
 #define MXC_INT_FIRI		7
-#define MXC_INT_MMC_SDHC2	8
+#define MX31_INT_MMC_SDHC2	8
 #define MXC_INT_MMC_SDHC1	9
-#define MXC_INT_I2C		10
-#define MXC_INT_SSI2		11
-#define MXC_INT_SSI1		12
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
+#define MX31_INT_SSI2		11
+#define MX31_INT_SSI1		12
 #define MXC_INT_MBX		16
 #define MXC_INT_CSPI3		17
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
 #define MXC_INT_SIM2		20
 #define MXC_INT_SIM1		21
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_RESV30		30
-#define MXC_INT_RESV31		31
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
+#define MXC_INT_CCM_DVFS	31
 #define MXC_INT_USB1		35
 #define MXC_INT_USB2		36
 #define MXC_INT_USB3		37
 #define MXC_INT_USB4		38
-#define MXC_INT_MSHC1		39
 #define MXC_INT_MSHC2		40
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_RESV43		43
-#define MXC_INT_RESV44		44
-#define MXC_INT_UART1		45
 #define MXC_INT_UART4		46
 #define MXC_INT_UART5		47
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
 #define MXC_INT_CCM		53
 #define MXC_INT_PCMCIA		54
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_RESV57		57
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31()		(1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
-	return system_rev;
-}
-#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
new file mode 100644
index 00000000000..6465fefb42e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -0,0 +1,29 @@
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
+#define MX35_IRAM_SIZE		SZ_128K
+
+#define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_NFC_BASE_ADDR	0xBB000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_OWIRE		2
+#define MX35_INT_MMC_SDHC1	7
+#define MXC_INT_MMC_SDHC2	8
+#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_SSI1		11
+#define MX35_INT_SSI2		12
+#define MXC_INT_GPU2D		16
+#define MXC_INT_ASRC		17
+#define MXC_INT_USBHS		35
+#define MXC_INT_USBOTG		37
+#define MXC_INT_ESAI		40
+#define MXC_INT_CAN1		43
+#define MXC_INT_CAN2		44
+#define MXC_INT_MLB		46
+#define MXC_INT_SPDIF		47
+#define MXC_INT_FEC		57
+
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
new file mode 100644
index 00000000000..83a172b51b0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ * MX31 memory map:
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * FC000000	43F00000	1M	AIPS 1
+ * FC100000	50000000	1M	SPBA
+ * FC200000	53F00000	1M	AIPS 2
+ * FC500000	60000000	128M	ROMPATCH
+ * FC400000	68000000	128M	AVIC
+ *         	70000000	256M	IPU (MAX M2)
+ *         	80000000	256M	CSD0 SDRAM/DDR
+ *         	90000000	256M	CSD1 SDRAM/DDR
+ *         	A0000000	128M	CS0 Flash
+ *         	A8000000	128M	CS1 Flash
+ *         	B0000000	32M	CS2
+ *         	B2000000	32M	CS3
+ * F4000000	B4000000	32M	CS4
+ *         	B6000000	32M	CS5
+ * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
+ *         	C0000000	64M	PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR		0x30000000
+#define L2CC_SIZE		SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR		0x43F00000
+#define AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define AIPS1_SIZE		SZ_1M
+
+#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
+#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
+#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 	0x50000000
+#define SPBA0_BASE_ADDR_VIRT	0xFC100000
+#define SPBA0_SIZE		SZ_1M
+
+#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR		0x53F00000
+#define AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define AIPS2_SIZE		SZ_1M
+#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
+#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
+#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR		0x60000000
+#define ROMP_BASE_ADDR_VIRT	0xFC500000
+#define ROMP_SIZE		SZ_1M
+
+#define AVIC_BASE_ADDR		0x68000000
+#define AVIC_BASE_ADDR_VIRT	0xFC400000
+#define AVIC_SIZE		SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR	0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
+#define X_MEMC_SIZE		SZ_64K
+
+#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR	0x70000000
+#define CSD0_BASE_ADDR		0x80000000
+#define CSD1_BASE_ADDR		0x90000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(void __iomem *) \
+	(((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define L2CC_IO_ADDRESS(x)  \
+	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x)  \
+	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x)  \
+	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x)  \
+	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x)  \
+	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)  \
+	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_I2C3		3
+#define MXC_INT_I2C2		4
+#define MXC_INT_RTIC		6
+#define MXC_INT_I2C		10
+#define MXC_INT_CSPI2		13
+#define MXC_INT_CSPI1		14
+#define MXC_INT_ATA		15
+#define MXC_INT_UART3		18
+#define MXC_INT_IIM		19
+#define MXC_INT_RNGA		22
+#define MXC_INT_EVTMON		23
+#define MXC_INT_KPP		24
+#define MXC_INT_RTC		25
+#define MXC_INT_PWM		26
+#define MXC_INT_EPIT2		27
+#define MXC_INT_EPIT1		28
+#define MXC_INT_GPT		29
+#define MXC_INT_POWER_FAIL	30
+#define MXC_INT_UART2		32
+#define MXC_INT_NANDFC		33
+#define MXC_INT_SDMA		34
+#define MXC_INT_MSHC1		39
+#define MXC_INT_IPU_ERR		41
+#define MXC_INT_IPU_SYN		42
+#define MXC_INT_UART1		45
+#define MXC_INT_ECT		48
+#define MXC_INT_SCC_SCM		49
+#define MXC_INT_SCC_SMN		50
+#define MXC_INT_GPIO2		51
+#define MXC_INT_GPIO1		52
+#define MXC_INT_WDOG		55
+#define MXC_INT_GPIO3		56
+#define MXC_INT_EXT_POWER	58
+#define MXC_INT_EXT_TEMPER	59
+#define MXC_INT_EXT_SENSOR60	60
+#define MXC_INT_EXT_SENSOR61	61
+#define MXC_INT_EXT_WDOG	62
+#define MXC_INT_EXT_TV		63
+
+#define PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0		0x10
+#define CHIP_REV_1_1		0x11
+#define CHIP_REV_1_2		0x12
+#define CHIP_REV_1_3		0x13
+#define CHIP_REV_2_0		0x20
+#define CHIP_REV_2_1		0x21
+#define CHIP_REV_2_2		0x22
+#define CHIP_REV_2_3		0x23
+#define CHIP_REV_3_0		0x30
+#define CHIP_REV_3_1		0x31
+#define CHIP_REV_3_2		0x32
+
+#define SYSTEM_REV_MIN		CHIP_REV_1_0
+#define SYSTEM_REV_NUM		3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x00
+#define GPIO_GDIR	 	0x04
+#define GPIO_PSR	 	0x08
+#define GPIO_ICR1	 	0x0C
+#define GPIO_ICR2	 	0x10
+#define GPIO_IMR	 	0x14
+#define GPIO_ISR	 	0x18
+#define GPIO_INT_LOW_LEV	0x0
+#define GPIO_INT_HIGH_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_FALL_EDGE	0x3
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS		96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+
-- 
cgit v1.2.3


From 198016e1b12d781ef00aaafbf571775a8e723f54 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Feb 2009 15:38:22 +0100
Subject: [ARM] MXC: add cpu_is_ macros

We had hardcoded cpu_is_ macros for mxc architectures till now. As we
want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_
macros which expand to 0 or 1 if only one architecture is compiled in and
only check for the cpu type if more than one architecture is compiled
in.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c               |  2 +
 arch/arm/plat-mxc/Makefile              |  2 +-
 arch/arm/plat-mxc/cpu.c                 | 11 +++++
 arch/arm/plat-mxc/include/mach/common.h |  1 +
 arch/arm/plat-mxc/include/mach/mx21.h   |  3 --
 arch/arm/plat-mxc/include/mach/mx27.h   |  3 --
 arch/arm/plat-mxc/include/mach/mxc.h    | 74 +++++++++++++++++++++++++++++----
 7 files changed, 80 insertions(+), 16 deletions(-)
 create mode 100644 arch/arm/plat-mxc/cpu.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index bc3a3beb9a6..9ab5f8b2bc3 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -1077,6 +1077,8 @@ int __init mx31_clocks_init(unsigned long fref)
 	u32 reg;
 	struct clk **clkp;
 
+	mxc_set_cpu_type(MXC_CPU_MX31);
+
 	ckih_rate = fref;
 
 	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index f204192f9b9..564fd4ebf38 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
new file mode 100644
index 00000000000..386e0d52cf5
--- /dev/null
+++ b/arch/arm/plat-mxc/cpu.c
@@ -0,0 +1,11 @@
+
+#include <linux/module.h>
+
+unsigned int __mxc_cpu_type;
+EXPORT_SYMBOL(__mxc_cpu_type);
+
+void mxc_set_cpu_type(unsigned int type)
+{
+	__mxc_cpu_type = type;
+}
+
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 3051eee9953..f467159cbdc 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -23,5 +23,6 @@ extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
+extern void mxc_set_cpu_type(unsigned int type);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index cfdbe051caf..e8c4cf56c24 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -54,9 +54,6 @@
 
 #define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
 
-/* this is an i.MX21 CPU */
-#define cpu_is_mx21()		(1)
-
 /* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
 #define ARCH_NR_GPIOS		(6*32 + 16)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 5f6a8a7bb19..6e93f2c0b7b 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -120,9 +120,6 @@ extern int mx27_revision(void);
 
 /* Mandatory defines used globally */
 
-/* this is an i.MX27 CPU */
-#define cpu_is_mx27()		(1)
-
 /* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
 #define ARCH_NR_GPIOS		(192 + 16)
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index d6b0c472cd9..5fa2a07f4ea 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -24,21 +24,74 @@
 #error "Do not include directly."
 #endif
 
-/* clean up all things that are not used */
-#ifndef CONFIG_ARCH_MX3
-# define cpu_is_mx31() (0)
+#define MXC_CPU_MX1		1
+#define MXC_CPU_MX21		21
+#define MXC_CPU_MX27		27
+#define MXC_CPU_MX31		31
+#define MXC_CPU_MX35		35
+
+#ifndef __ASSEMBLY__
+extern unsigned int __mxc_cpu_type;
+#endif
+
+#ifdef CONFIG_ARCH_MX1
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX1
+# endif
+# define cpu_is_mx1()		(mxc_cpu_type == MXC_CPU_MX1)
+#else
+# define cpu_is_mx1()		(0)
 #endif
 
-#ifndef CONFIG_MACH_MX21
-# define cpu_is_mx21() (0)
+#ifdef CONFIG_MACH_MX21
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX21
+# endif
+# define cpu_is_mx21()		(mxc_cpu_type == MXC_CPU_MX21)
+#else
+# define cpu_is_mx21()		(0)
 #endif
 
-#ifndef CONFIG_MACH_MX27
-# define cpu_is_mx27() (0)
+#ifdef CONFIG_MACH_MX27
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX27
+# endif
+# define cpu_is_mx27()		(mxc_cpu_type == MXC_CPU_MX27)
+#else
+# define cpu_is_mx27()		(0)
 #endif
 
-#ifndef CONFIG_MACH_MX21
-# define cpu_is_mx21() (0)
+#ifdef CONFIG_ARCH_MX31
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX31
+# endif
+# define cpu_is_mx31()		(mxc_cpu_type == MXC_CPU_MX31)
+#else
+# define cpu_is_mx31()		(0)
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX35
+# endif
+# define cpu_is_mx35()		(mxc_cpu_type == MXC_CPU_MX35)
+#else
+# define cpu_is_mx35()		(0)
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
@@ -47,4 +100,7 @@
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
+
 #endif /*  __ASM_ARCH_MXC_H__ */
-- 
cgit v1.2.3


From cb8ebb0223a5a2ec6f2e0b46ef5812113847df61 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Feb 2009 15:41:45 +0100
Subject: [ARM] add i.MX35 build support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Kconfig  | 13 ++++++++++++-
 arch/arm/mach-mx3/Makefile |  3 ++-
 2 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 6933d2d0b56..7c939c69d6d 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,9 +1,16 @@
 if ARCH_MX3
 
+config ARCH_MX31
+	bool
+
+config ARCH_MX35
+	bool
+
 comment "MX3 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
+	select ARCH_MX31
 	default y
 	help
 	  Include support for MX31ADS platform. This includes specific
@@ -19,13 +26,15 @@ config MACH_MX31ADS_WM1133_EV1
 	  and audio module for the MX31ADS platform.
 
 config MACH_PCM037
-	bool "Support Phytec pcm037 platforms"
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select ARCH_MX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
+	select ARCH_MX31
 	default n
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
@@ -33,6 +42,7 @@ config MACH_MX31LITE
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
+	select ARCH_MX31
 	default n
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
@@ -40,6 +50,7 @@ config MACH_MX31_3DS
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select ARCH_MX31
 	default n
 	help
 	  Include support for mx31moboard platform. This includes specific
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index d50d9878a65..68c4837cce6 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,7 +4,8 @@
 
 # Object file lists.
 
-obj-y			:= mm.o clock.o devices.o iomux.o
+obj-y				:= mm.o devices.o
+obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
-- 
cgit v1.2.3


From 2cb536d13cf9fbce029055b7603b3ca4ca1cf407 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Feb 2009 17:48:59 +0100
Subject: [ARM] MX35: add clock support

This patch adds clock support for i.MX35 SoCs. We do not support setting
of clock rates yet, but most interesting clock rates should be reported.
I couldn't test all clock rates and the datasheet contains some obvious
bugs, so expect some bugs in this code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Makefile              |   1 +
 arch/arm/mach-mx3/clock-imx35.c         | 487 ++++++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/common.h |   1 +
 3 files changed, 489 insertions(+)
 create mode 100644 arch/arm/mach-mx3/clock-imx35.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 68c4837cce6..ab0bec0a4d9 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -6,6 +6,7 @@
 
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
new file mode 100644
index 00000000000..53a112d4e04
--- /dev/null
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -0,0 +1,487 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+
+#define CCM_CCMR        0x00
+#define CCM_PDR0        0x04
+#define CCM_PDR1        0x08
+#define CCM_PDR2        0x0C
+#define CCM_PDR3        0x10
+#define CCM_PDR4        0x14
+#define CCM_RCSR        0x18
+#define CCM_MPCTL       0x1C
+#define CCM_PPCTL       0x20
+#define CCM_ACMR        0x24
+#define CCM_COSR        0x28
+#define CCM_CGR0        0x2C
+#define CCM_CGR1        0x30
+#define CCM_CGR2        0x34
+#define CCM_CGR3        0x38
+
+#ifdef HAVE_SET_RATE_SUPPORT
+static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
+{
+	u32 min_pre, temp_pre, old_err, err;
+
+	min_pre = (div - 1) / maxpost + 1;
+	old_err = 8;
+
+	for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+		if (div > (temp_pre * maxpost))
+			break;
+
+		if (div < (temp_pre * temp_pre))
+			continue;
+
+		err = div % temp_pre;
+
+		if (err == 0) {
+			*pre = temp_pre;
+			break;
+		}
+
+		err = temp_pre - err;
+
+		if (err < old_err) {
+			old_err = err;
+			*pre = temp_pre;
+		}
+	}
+
+	*post = (div + *pre - 1) / *pre;
+}
+
+/* get the best values for a 3-bit divider combined with a 6-bit divider */
+static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
+{
+	if (div >= 512) {
+		*pre = 8;
+		*post = 64;
+	} else if (div >= 64) {
+		calc_dividers(div, pre, post, 64);
+	} else if (div <= 8) {
+		*pre = div;
+		*post = 1;
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+
+/* get the best values for two cascaded 3-bit dividers */
+static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
+{
+	if (div >= 64) {
+		*pre = *post = 8;
+	} else if (div > 8) {
+		calc_dividers(div, pre, post, 8);
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+#endif
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_ppll(void)
+{
+	ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL);
+
+	return mxc_decode_pll(ppctl, 24000000);
+}
+
+struct arm_ahb_div {
+	unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+	{ .arm = 1, .ahb = 4, .sel = 0},
+	{ .arm = 1, .ahb = 3, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 1, .sel = 0},
+	{ .arm = 1, .ahb = 5, .sel = 0},
+	{ .arm = 1, .ahb = 8, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 1},
+	{ .arm = 2, .ahb = 4, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static struct arm_ahb_div clk_automotive[] = {
+	{ .arm = 1, .ahb = 3, .sel = 0},
+	{ .arm = 1, .ahb = 2, .sel = 1},
+	{ .arm = 2, .ahb = 1, .sel = 1},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 0},
+	{ .arm = 1, .ahb = 4, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 1},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static unsigned long get_rate_arm(void)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	struct arm_ahb_div *aad;
+	unsigned long fref = get_rate_mpll();
+
+	if (pdr0 & 1) {
+		/* consumer path */
+		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+		if (aad->sel)
+			fref = fref * 2 / 3;
+	} else {
+		/* auto path */
+		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+		if (aad->sel)
+			fref = fref * 3 / 4;
+	}
+	return fref / aad->arm;
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	struct arm_ahb_div *aad;
+	unsigned long fref = get_rate_mpll();
+
+	if (pdr0 & 1)
+		/* consumer path */
+		aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	else
+		/* auto path */
+		aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+
+	return fref / aad->ahb;
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_3_3_div(unsigned long in)
+{
+	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long div = get_3_3_div(pdr4 >> 10);
+
+	if (pdr3 & (1 << 14))
+		return get_rate_arm() / div;
+	else
+		return get_rate_ppll() / div;
+}
+
+static unsigned long get_rate_sdhc(struct clk *clk)
+{
+	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+	unsigned long div, rate;
+
+	if (pdr3 & (1 << 6))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	switch (clk->id) {
+	default:
+	case 0:
+		div = pdr3 & 0x3f;
+		break;
+	case 1:
+		div = (pdr3 >> 8) & 0x3f;
+		break;
+	case 2:
+		div = (pdr3 >> 16) & 0x3f;
+		break;
+	}
+
+	return rate / get_3_3_div(div);
+}
+
+static unsigned long get_rate_mshc(struct clk *clk)
+{
+	unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1);
+	unsigned long div1, div2, rate;
+
+	if (pdr1 & (1 << 7))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	div1 = (pdr1 >> 29) & 0x7;
+	div2 = (pdr1 >> 22) & 0x3f;
+
+	return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_ssi(struct clk *clk)
+{
+	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+	unsigned long div1, div2, rate;
+
+	if (pdr2 & (1 << 6))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	switch (clk->id) {
+	default:
+	case 0:
+		div1 = pdr2 & 0x3f;
+		div2 = (pdr2 >> 24) & 0x7;
+		break;
+	case 1:
+		div1 = (pdr2 >> 8) & 0x3f;
+		div2 = (pdr2 >> 27) & 0x7;
+		break;
+	}
+
+	return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+	unsigned long rate;
+
+	if (pdr2 & (1 << 7))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+}
+
+static unsigned long get_rate_ipg_per(struct clk *clk)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long div1, div2;
+
+	if (pdr0 & (1 << 26)) {
+		div1 = (pdr4 >> 19) & 0x7;
+		div2 = (pdr4 >> 16) & 0x7;
+		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+	} else {
+		div1 = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / div1;
+	}
+}
+
+static int clk_cgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CCM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgr_enable,	\
+		.disable	= clk_cgr_disable,	\
+	}
+
+DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
+DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  1, CCM_CGR0, 12, get_rate_ipg, NULL);
+DEFINE_CLOCK(ect_clk,    0, CCM_CGR0, 14, get_rate_ipg, NULL);
+DEFINE_CLOCK(edio_clk,   0, CCM_CGR0, 16, NULL, NULL);
+DEFINE_CLOCK(emi_clk,    0, CCM_CGR0, 18, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(esai_clk,   0, CCM_CGR0, 24, NULL, NULL);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL);
+
+DEFINE_CLOCK(fec_clk,    0, CCM_CGR1,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpio1_clk,  0, CCM_CGR1,  2, NULL, NULL);
+DEFINE_CLOCK(gpio2_clk,  1, CCM_CGR1,  4, NULL, NULL);
+DEFINE_CLOCK(gpio3_clk,  2, CCM_CGR1,  6, NULL, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGR1,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
+DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
+DEFINE_CLOCK(owire_clk,  0, CCM_CGR1, 26, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(pwm_clk,    0, CCM_CGR1, 28, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(rngc_clk,   0, CCM_CGR1, 30, get_rate_ipg, NULL);
+
+DEFINE_CLOCK(rtc_clk,    0, CCM_CGR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(rtic_clk,   0, CCM_CGR2,  2, get_rate_ahb, NULL);
+DEFINE_CLOCK(scc_clk,    0, CCM_CGR2,  4, get_rate_ipg, NULL);
+DEFINE_CLOCK(sdma_clk,   0, CCM_CGR2,  6, NULL, NULL);
+DEFINE_CLOCK(spba_clk,   0, CCM_CGR2,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(spdif_clk,  0, CCM_CGR2, 10, NULL, NULL);
+DEFINE_CLOCK(ssi1_clk,   0, CCM_CGR2, 12, get_rate_ssi, NULL);
+DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
+DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
+DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+
+DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
+DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
+DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK(NULL, "can", can1_clk)
+	_REGISTER_CLOCK(NULL, "can", can2_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK(NULL, "ect", ect_clk)
+	_REGISTER_CLOCK(NULL, "edio", edio_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK(NULL, "esai", esai_clk)
+	_REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
+	_REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
+	_REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
+	_REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
+	_REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK(NULL, "rngc", rngc_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+	_REGISTER_CLOCK(NULL, "spba", spba_clk)
+	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "max", max_clk)
+	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+};
+
+int __init mx35_clocks_init()
+{
+	int i;
+	unsigned int ll = 0;
+
+	mxc_set_cpu_type(MXC_CPU_MX35);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+	ll = (3 << 16);
+#endif
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
+	 */
+	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
+	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
+			CCM_BASE + CCM_CGR1);
+	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
+	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	mxc_timer_init(&gpt_clk);
+
+	return 0;
+}
+
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index f467159cbdc..b2f9b72644d 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -21,6 +21,7 @@ extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
+extern int mx35_clocks_init(void);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
-- 
cgit v1.2.3


From 9536ff33619e13fcc4bd16354faea97dba244f73 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Feb 2009 15:38:51 +0100
Subject: [ARM] MX35 devices support

The i.MX35 basically features the same peripherals as the i.MX31 with
some differences:

- The i.MX35 has a FEC ethernet controller
- The NAND controller base addresses are different
- The i.MX35 has only 3 UARTs

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 43 +++++++++++++++++++++++++++++++++++++++++--
 arch/arm/mach-mx3/devices.h |  1 +
 2 files changed, 42 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index b7d4900b02e..ab090602cea 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -84,6 +84,7 @@ struct platform_device mxc_uart_device2 = {
 	.num_resources = ARRAY_SIZE(uart2),
 };
 
+#ifdef CONFIG_ARCH_MX31
 static struct resource uart3[] = {
 	{
 		.start = UART4_BASE_ADDR,
@@ -121,6 +122,7 @@ struct platform_device mxc_uart_device4 = {
 	.resource = uart4,
 	.num_resources = ARRAY_SIZE(uart4),
 };
+#endif /* CONFIG_ARCH_MX31 */
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
@@ -166,8 +168,8 @@ struct platform_device mxc_w1_master_device = {
 
 static struct resource mxc_nand_resources[] = {
 	{
-		.start	= NFC_BASE_ADDR,
-		.end	= NFC_BASE_ADDR + 0xfff,
+		.start	= 0, /* runtime dependent */
+		.end	= 0,
 		.flags	= IORESOURCE_MEM
 	}, {
 		.start	= MXC_INT_NANDFC,
@@ -290,3 +292,40 @@ struct platform_device mx3_fb = {
 		.coherent_dma_mask = 0xffffffff,
        },
 };
+
+#ifdef CONFIG_ARCH_MX35
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= MXC_FEC_BASE_ADDR,
+		.end	= MXC_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_FEC,
+		.end	= MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+#endif
+
+static int mx3_devices_init(void)
+{
+	if (cpu_is_mx31()) {
+		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
+		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+	}
+	if (cpu_is_mx35()) {
+		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+	}
+
+	return 0;
+}
+
+subsys_initcall(mx3_devices_init);
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index d1638518a9d..4faac6552e0 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,3 +11,4 @@ extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
+extern struct platform_device mxc_fec_device;
-- 
cgit v1.2.3


From cb88214d726b337d49c1f65cbc5e5ac85837b11b Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sun, 8 Feb 2009 02:00:50 +0100
Subject: [ARM] MX31/MX35: Add l2x0 cache support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c | 27 ++++++++++++++++++++++++++-
 arch/arm/mm/Kconfig    |  3 ++-
 2 files changed, 28 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 0589b5cd33c..44fcb6679f9 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,14 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <mach/hardware.h>
+#include <linux/err.h>
+
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
 #include <mach/common.h>
+#include <mach/hardware.h>
 
 /*!
  * @file mm.c
@@ -62,3 +66,24 @@ void __init mxc_map_io(void)
 {
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+
+#ifdef CONFIG_CACHE_L2X0
+static int mxc_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+
+	l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return 0;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+	return 0;
+}
+
+arch_initcall(mxc_init_l2x0);
+#endif
+
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f3773c0..0d8581f1121 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -704,7 +704,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP
+	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
 	default y
 	select OUTER_CACHE
 	help
-- 
cgit v1.2.3


From fb4416ad61e4dac816ae866999115500c818406b Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 6 Feb 2009 18:15:06 +0100
Subject: [ARM] MX31: Move static virtual mappings of AIPS1/2 to common file

On MX31 we can't do much without mapping the AIPS1/2 register space.
Move these mappings from individual boards to plat-mxc/mm.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c          | 10 ++++++++++
 arch/arm/mach-mx3/mx31ads.c     | 10 ----------
 arch/arm/mach-mx3/mx31lite.c    | 10 ----------
 arch/arm/mach-mx3/mx31moboard.c | 28 +---------------------------
 arch/arm/mach-mx3/mx31pdk.c     | 28 +---------------------------
 arch/arm/mach-mx3/pcm037.c      | 28 +---------------------------
 6 files changed, 13 insertions(+), 101 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 44fcb6679f9..9e1459cb4b7 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -54,6 +54,16 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AVIC_BASE_ADDR),
 		.length		= AVIC_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 5c76ac5ba0f..83e5e8e1276 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -492,20 +492,10 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= SPBA0_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
 		.length		= SPBA0_SIZE,
 		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
 	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index e61fad2f60f..894d98cd994 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -42,20 +42,10 @@
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length = AIPS1_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = SPBA0_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
 		.length = SPBA0_SIZE,
 		.type = MT_DEVICE_NONSHARED
-	}, {
-		.virtual = AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length = AIPS2_SIZE,
-		.type = MT_DEVICE_NONSHARED
 	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b30460a2a55..34c2a1b99d4 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -103,32 +103,6 @@ static void __init mxc_board_init(void)
 	}
 }
 
-/*
- * This structure defines static mappings for the mx31moboard.
- */
-static struct map_desc mx31moboard_io_desc[] __initdata = {
-	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31moboard_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc));
-}
-
 static void __init mx31moboard_timer_init(void)
 {
 	mx31_clocks_init(26000000);
@@ -143,7 +117,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31moboard_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index 9108f157b76..bc63f178569 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -58,32 +58,6 @@ static inline void mxc_init_imx_uart(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }
 
-/*!
- * This structure defines static mappings for the i.MX31PDK board.
- */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
-	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-/*!
- * Set up static virtual mappings.
- */
-static void __init mx31pdk_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
-}
-
 /*!
  * Board specific initialization.
  */
@@ -110,7 +84,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31pdk_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index a05e37b731b..7743c13beba 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -210,32 +210,6 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 }
 
-/*
- * This structure defines static mappings for the pcm037 board.
- */
-static struct map_desc pcm037_io_desc[] __initdata = {
-	{
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init pcm037_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
-}
-
 static void __init pcm037_timer_init(void)
 {
 	mx31_clocks_init(26000000);
@@ -250,7 +224,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.phys_io	= AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = pcm037_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
-- 
cgit v1.2.3


From 9a51157bab06ab54d6ee442e34fe9574ff14c8c3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 9 Feb 2009 11:00:03 +0100
Subject: [ARM] pcm038: Fix pins for UART3

The UART3 had a copy-paste bug. instead of claiming rxd, txd, rts and
cts pins, cts and rts were claimed twice

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 7d935e17aa1..aa4eaa61d1b 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -128,10 +128,10 @@ static int uart_mxc_port1_exit(struct platform_device *pdev)
 	return 0;
 }
 
-static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
 				PE9_PF_UART3_RXD,
 				PE10_PF_UART3_CTS,
-				PE9_PF_UART3_RXD };
+				PE11_PF_UART3_RTS };
 
 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
-- 
cgit v1.2.3


From 9eb2eb8c40ffd30da322648c4415bae0288eb167 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 18 Feb 2009 11:55:33 +0100
Subject: MX31 clkdev support

This patch adds clkdev support for i.MX31. This is done in a
similar way done previously for i.MX27

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c    | 932 ++++++++++---------------------------------
 arch/arm/mach-mx3/crm_regs.h | 153 -------
 arch/arm/plat-mxc/Kconfig    |   1 +
 3 files changed, 204 insertions(+), 882 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9ab5f8b2bc3..ca46f4801c3 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,10 +23,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <asm/div64.h>
 
 #include "crm_regs.h"
 
@@ -65,17 +68,17 @@ static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
 }
 
 static struct clk mcu_pll_clk;
-static struct clk mcu_main_clk;
-static struct clk usb_pll_clk;
 static struct clk serial_pll_clk;
 static struct clk ipg_clk;
 static struct clk ckih_clk;
-static struct clk ahb_clk;
 
-static int _clk_enable(struct clk *clk)
+static int cgr_enable(struct clk *clk)
 {
 	u32 reg;
 
+	if (!clk->enable_reg)
+		return 0;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg |= 3 << clk->enable_shift;
 	__raw_writel(reg, clk->enable_reg);
@@ -83,111 +86,69 @@ static int _clk_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_disable(struct clk *clk)
+static void cgr_disable(struct clk *clk)
 {
 	u32 reg;
 
+	if (!clk->enable_reg)
+		return;
+
 	reg = __raw_readl(clk->enable_reg);
 	reg &= ~(3 << clk->enable_shift);
+
+	/* special case for EMI clock */
+	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+		reg |= (1 << clk->enable_shift);
+
 	__raw_writel(reg, clk->enable_reg);
 }
 
-static void _clk_emi_disable(struct clk *clk)
+static unsigned long pll_ref_get_rate(void)
 {
-	u32 reg;
+	unsigned long ccmr;
+	unsigned int prcs;
 
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-	reg |= (1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+	if (prcs == 0x1)
+		return CKIL_CLK_FREQ * 1024;
+	else
+		return clk_get_rate(&ckih_clk);
 }
 
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long usb_pll_get_rate(struct clk *clk)
 {
-	u32 reg;
-	signed long pd = 1;	/* Pre-divider */
-	signed long mfi;	/* Multiplication Factor (Integer part) */
-	signed long mfn;	/* Multiplication Factor (Integer part) */
-	signed long mfd;	/* Multiplication Factor (Denominator Part) */
-	signed long tmp;
-	u32 ref_freq = clk_get_rate(clk->parent);
+	unsigned long reg;
 
-	while (((ref_freq / pd) * 10) > rate)
-		pd++;
+	reg = __raw_readl(MXC_CCM_UPCTL);
 
-	if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
-		return -EINVAL;
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
 
-	/* the ref_freq/2 in the following is to round up */
-	mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
-	if (mfi < 5 || mfi > 15)
-		return -EINVAL;
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg;
 
-	/* pick a mfd value that will work
-	 * then solve for mfn */
-	mfd = ref_freq / 50000;
-
-	/*
-	 *          pll_freq * pd * mfd
-	 *   mfn = --------------------  -  (mfi * mfd)
-	 *           2 * ref_freq
-	 */
-	/* the tmp/2 is for rounding */
-	tmp = ref_freq / 10000;
-	mfn =
-	    ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
-	    (mfi * mfd);
-
-	mfn = mfn & 0x3ff;
-	pd--;
-	mfd--;
-
-	/* Change the Pll value */
-	reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
-	    (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
-	    (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
-
-	if (clk == &mcu_pll_clk)
-		__raw_writel(reg, MXC_CCM_MPCTL);
-	else if (clk == &usb_pll_clk)
-		__raw_writel(reg, MXC_CCM_UPCTL);
-	else if (clk == &serial_pll_clk)
-		__raw_writel(reg, MXC_CCM_SRPCTL);
+	reg = __raw_readl(MXC_CCM_SRPCTL);
 
-	return 0;
+	return mxc_decode_pll(reg, pll_ref_get_rate());
 }
 
-static unsigned long _clk_pll_get_rate(struct clk *clk)
+static unsigned long mcu_pll_get_rate(struct clk *clk)
 {
 	unsigned long reg, ccmr;
-	unsigned int prcs, ref_clk;
 
 	ccmr = __raw_readl(MXC_CCM_CCMR);
-	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
-	if (prcs == 0x1)
-		ref_clk = CKIL_CLK_FREQ * 1024;
-	else
-		ref_clk = clk_get_rate(&ckih_clk);
-
-	if (clk == &mcu_pll_clk) {
-		if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
-			return ref_clk;
-		if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
-			return ref_clk;
-		reg = __raw_readl(MXC_CCM_MPCTL);
-	} else if (clk == &usb_pll_clk)
-		reg = __raw_readl(MXC_CCM_UPCTL);
-	else if (clk == &serial_pll_clk)
-		reg = __raw_readl(MXC_CCM_SRPCTL);
-	else {
-		BUG();
-		return 0;
-	}
 
-	return mxc_decode_pll(reg, ref_clk);
+	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+		return clk_get_rate(&ckih_clk);
+
+	reg = __raw_readl(MXC_CCM_MPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
 }
 
-static int _clk_usb_pll_enable(struct clk *clk)
+static int usb_pll_enable(struct clk *clk)
 {
 	u32 reg;
 
@@ -201,7 +162,7 @@ static int _clk_usb_pll_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_usb_pll_disable(struct clk *clk)
+static void usb_pll_disable(struct clk *clk)
 {
 	u32 reg;
 
@@ -210,7 +171,7 @@ static void _clk_usb_pll_disable(struct clk *clk)
 	__raw_writel(reg, MXC_CCM_CCMR);
 }
 
-static int _clk_serial_pll_enable(struct clk *clk)
+static int serial_pll_enable(struct clk *clk)
 {
 	u32 reg;
 
@@ -224,7 +185,7 @@ static int _clk_serial_pll_enable(struct clk *clk)
 	return 0;
 }
 
-static void _clk_serial_pll_disable(struct clk *clk)
+static void serial_pll_disable(struct clk *clk)
 {
 	u32 reg;
 
@@ -237,7 +198,7 @@ static void _clk_serial_pll_disable(struct clk *clk)
 #define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
 #define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
 
-static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+static unsigned long mcu_main_get_rate(struct clk *clk)
 {
 	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
 
@@ -247,7 +208,7 @@ static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
 		return clk_get_rate(&mcu_pll_clk);
 }
 
-static unsigned long _clk_hclk_get_rate(struct clk *clk)
+static unsigned long ahb_get_rate(struct clk *clk)
 {
 	unsigned long max_pdf;
 
@@ -256,7 +217,7 @@ static unsigned long _clk_hclk_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (max_pdf + 1);
 }
 
-static unsigned long _clk_ipg_get_rate(struct clk *clk)
+static unsigned long ipg_get_rate(struct clk *clk)
 {
 	unsigned long ipg_pdf;
 
@@ -265,7 +226,7 @@ static unsigned long _clk_ipg_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
 }
 
-static unsigned long _clk_nfc_get_rate(struct clk *clk)
+static unsigned long nfc_get_rate(struct clk *clk)
 {
 	unsigned long nfc_pdf;
 
@@ -274,7 +235,7 @@ static unsigned long _clk_nfc_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
 }
 
-static unsigned long _clk_hsp_get_rate(struct clk *clk)
+static unsigned long hsp_get_rate(struct clk *clk)
 {
 	unsigned long hsp_pdf;
 
@@ -283,7 +244,7 @@ static unsigned long _clk_hsp_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
 }
 
-static unsigned long _clk_usb_get_rate(struct clk *clk)
+static unsigned long usb_get_rate(struct clk *clk)
 {
 	unsigned long usb_pdf, usb_prepdf;
 
@@ -294,7 +255,7 @@ static unsigned long _clk_usb_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
 }
 
-static unsigned long _clk_csi_get_rate(struct clk *clk)
+static unsigned long csi_get_rate(struct clk *clk)
 {
 	u32 reg, pre, post;
 
@@ -308,7 +269,7 @@ static unsigned long _clk_csi_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (pre * post);
 }
 
-static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
 {
 	u32 pre, post, parent = clk_get_rate(clk->parent);
 	u32 div = parent / rate;
@@ -321,7 +282,7 @@ static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
 	return parent / (pre * post);
 }
 
-static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+static int csi_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
 
@@ -342,16 +303,7 @@ static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long _clk_per_get_rate(struct clk *clk)
-{
-	unsigned long per_pdf;
-
-	per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
-		       MXC_CCM_PDR0_PER_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (per_pdf + 1);
-}
-
-static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+static unsigned long ssi1_get_rate(struct clk *clk)
 {
 	unsigned long ssi1_pdf, ssi1_prepdf;
 
@@ -362,7 +314,7 @@ static unsigned long _clk_ssi1_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
 }
 
-static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+static unsigned long ssi2_get_rate(struct clk *clk)
 {
 	unsigned long ssi2_pdf, ssi2_prepdf;
 
@@ -373,7 +325,7 @@ static unsigned long _clk_ssi2_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
 }
 
-static unsigned long _clk_firi_get_rate(struct clk *clk)
+static unsigned long firi_get_rate(struct clk *clk)
 {
 	unsigned long firi_pdf, firi_prepdf;
 
@@ -384,7 +336,7 @@ static unsigned long _clk_firi_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
 }
 
-static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
 {
 	u32 pre, post;
 	u32 parent = clk_get_rate(clk->parent);
@@ -399,7 +351,7 @@ static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
 
 }
 
-static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+static int firi_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
 
@@ -420,12 +372,12 @@ static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long _clk_mbx_get_rate(struct clk *clk)
+static unsigned long mbx_get_rate(struct clk *clk)
 {
 	return clk_get_rate(clk->parent) / 2;
 }
 
-static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+static unsigned long mstick1_get_rate(struct clk *clk)
 {
 	unsigned long msti_pdf;
 
@@ -434,7 +386,7 @@ static unsigned long _clk_mstick1_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (msti_pdf + 1);
 }
 
-static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+static unsigned long mstick2_get_rate(struct clk *clk)
 {
 	unsigned long msti_pdf;
 
@@ -451,663 +403,185 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
 }
 
 static struct clk ckih_clk = {
-	.name = "ckih",
 	.get_rate = clk_ckih_get_rate,
 };
 
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
-	.name = "ckil",
-	.get_rate = clk_ckil_get_rate,
-};
-
 static struct clk mcu_pll_clk = {
-	.name = "mcu_pll",
 	.parent = &ckih_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = _clk_pll_get_rate,
+	.get_rate = mcu_pll_get_rate,
 };
 
 static struct clk mcu_main_clk = {
-	.name = "mcu_main_clk",
 	.parent = &mcu_pll_clk,
-	.get_rate = _clk_mcu_main_get_rate,
+	.get_rate = mcu_main_get_rate,
 };
 
 static struct clk serial_pll_clk = {
-	.name = "serial_pll",
 	.parent = &ckih_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = _clk_pll_get_rate,
-	.enable = _clk_serial_pll_enable,
-	.disable = _clk_serial_pll_disable,
+	.get_rate = serial_pll_get_rate,
+	.enable = serial_pll_enable,
+	.disable = serial_pll_disable,
 };
 
 static struct clk usb_pll_clk = {
-	.name = "usb_pll",
 	.parent = &ckih_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = _clk_pll_get_rate,
-	.enable = _clk_usb_pll_enable,
-	.disable = _clk_usb_pll_disable,
+	.get_rate = usb_pll_get_rate,
+	.enable = usb_pll_enable,
+	.disable = usb_pll_disable,
 };
 
 static struct clk ahb_clk = {
-	.name = "ahb_clk",
 	.parent = &mcu_main_clk,
-	.get_rate = _clk_hclk_get_rate,
-};
-
-static struct clk per_clk = {
-	.name = "per_clk",
-	.parent = &usb_pll_clk,
-	.get_rate = _clk_per_get_rate,
-};
-
-static struct clk perclk_clk = {
-	.name = "perclk_clk",
-	.parent = &ipg_clk,
-};
-
-static struct clk cspi_clk[] = {
-	{
-	 .name = "cspi_clk",
-	 .id = 0,
-	 .parent = &ipg_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR2,
-	 .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "cspi_clk",
-	 .id = 1,
-	 .parent = &ipg_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR2,
-	 .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "cspi_clk",
-	 .id = 2,
-	 .parent = &ipg_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk ipg_clk = {
-	.name = "ipg_clk",
-	.parent = &ahb_clk,
-	.get_rate = _clk_ipg_get_rate,
-};
-
-static struct clk emi_clk = {
-	.name = "emi_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
-	.disable = _clk_emi_disable,
-};
-
-static struct clk gpt_clk = {
-	.name = "gpt_clk",
-	.parent = &perclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk pwm_clk = {
-	.name = "pwm_clk",
-	.parent = &perclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk epit_clk[] = {
-	{
-	 .name = "epit_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "epit_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk nfc_clk = {
-	.name = "nfc",
-	.parent = &ahb_clk,
-	.get_rate = _clk_nfc_get_rate,
-};
-
-static struct clk scc_clk = {
-	.name = "scc_clk",
-	.parent = &ipg_clk,
-};
-
-static struct clk ipu_clk = {
-	.name = "ipu_clk",
-	.parent = &mcu_main_clk,
-	.get_rate = _clk_hsp_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.name = "kpp_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk wdog_clk = {
-	.name = "wdog_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
-	.disable = _clk_disable,
-};
-static struct clk rtc_clk = {
-	.name = "rtc_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk usb_clk[] = {
-	{
-	 .name = "usb_clk",
-	 .parent = &usb_pll_clk,
-	 .get_rate = _clk_usb_get_rate,},
-	{
-	 .name = "usb_ahb_clk",
-	 .parent = &ahb_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk csi_clk = {
-	.name = "csi_clk",
-	.parent = &serial_pll_clk,
-	.get_rate = _clk_csi_get_rate,
-	.round_rate = _clk_csi_round_rate,
-	.set_rate = _clk_csi_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk uart_clk[] = {
-	{
-	 .name = "uart",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart",
-	 .id = 2,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart",
-	 .id = 3,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "uart",
-	 .id = 4,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk i2c_clk[] = {
-	{
-	 .name = "i2c_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "i2c_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "i2c_clk",
-	 .id = 2,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk owire_clk = {
-	.name = "owire",
-	.parent = &perclk_clk,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
-	.enable = _clk_enable,
-	.disable = _clk_disable,
-};
-
-static struct clk sdhc_clk[] = {
-	{
-	 .name = "sdhc_clk",
-	 .id = 0,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "sdhc_clk",
-	 .id = 1,
-	 .parent = &perclk_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk ssi_clk[] = {
-	{
-	 .name = "ssi_clk",
-	 .parent = &serial_pll_clk,
-	 .get_rate = _clk_ssi1_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "ssi_clk",
-	 .id = 1,
-	 .parent = &serial_pll_clk,
-	 .get_rate = _clk_ssi2_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR2,
-	 .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk firi_clk = {
-	.name = "firi_clk",
-	.parent = &usb_pll_clk,
-	.round_rate = _clk_firi_round_rate,
-	.set_rate = _clk_firi_set_rate,
-	.get_rate = _clk_firi_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk ata_clk = {
-	.name = "ata_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mbx_clk = {
-	.name = "mbx_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
-	.get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk vpu_clk = {
-	.name = "vpu_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
-	.get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk rtic_clk = {
-	.name = "rtic_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR2,
-	.enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rng_clk = {
-	.name = "rng_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk sdma_clk[] = {
-	{
-	 .name = "sdma_ahb_clk",
-	 .parent = &ahb_clk,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR0,
-	 .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "sdma_ipg_clk",
-	 .parent = &ipg_clk,}
-};
-
-static struct clk mpeg4_clk = {
-	.name = "mpeg4_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk vl2cc_clk = {
-	.name = "vl2cc_clk",
-	.parent = &ahb_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR1,
-	.enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mstick_clk[] = {
-	{
-	 .name = "mstick_clk",
-	 .id = 0,
-	 .parent = &usb_pll_clk,
-	 .get_rate = _clk_mstick1_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
-	 .disable = _clk_disable,},
-	{
-	 .name = "mstick_clk",
-	 .id = 1,
-	 .parent = &usb_pll_clk,
-	 .get_rate = _clk_mstick2_get_rate,
-	 .enable = _clk_enable,
-	 .enable_reg = MXC_CCM_CGR1,
-	 .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
-	 .disable = _clk_disable,},
-};
-
-static struct clk iim_clk = {
-	.name = "iim_clk",
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = MXC_CCM_CGR0,
-	.enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 div, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-	if (parent % rate)
-		div++;
-
-	if (div > 8)
-		div = 16;
-	else if (div > 4)
-		div = 8;
-	else if (div > 2)
-		div = 4;
-
-	return parent / div;
-}
-
-static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if (div == 16)
-		div = 4;
-	else if (div == 8)
-		div = 3;
-	else if (div == 4)
-		div = 2;
-	else if (div == 2)
-		div = 1;
-	else if (div == 1)
-		div = 0;
-	else
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
-	reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
-	__raw_writel(reg, MXC_CCM_COSR);
-
-	return 0;
-}
-
-static unsigned long _clk_cko1_get_rate(struct clk *clk)
-{
-	u32 div;
-
-	div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
-	    MXC_CCM_COSR_CLKOUTDIV_OFFSET;
-
-	return clk_get_rate(clk->parent) / (1 << div);
-}
-
-static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
-
-	if (parent == &mcu_main_clk)
-		reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_pll_clk)
-		reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == mcu_main_clk.parent)
-		reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ahb_clk)
-		reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &serial_pll_clk)
-		reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &emi_clk)
-		reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &ipu_clk)
-		reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else if (parent == &uart_clk[0])
-		reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_COSR);
-
-	return 0;
-}
-
-static int _clk_cko1_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
-	__raw_writel(reg, MXC_CCM_COSR);
-
-	return 0;
-}
-
-static void _clk_cko1_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
-	__raw_writel(reg, MXC_CCM_COSR);
-}
+	.get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= cgr_enable,		\
+		.disable	= cgr_disable,		\
+		.secondary	= s,			\
+		.parent		= p,			\
+	}
 
-static struct clk cko1_clk = {
-	.name = "cko1_clk",
-	.get_rate = _clk_cko1_get_rate,
-	.set_rate = _clk_cko1_set_rate,
-	.round_rate = _clk_cko1_round_rate,
-	.set_parent = _clk_cko1_set_parent,
-	.enable = _clk_cko1_enable,
-	.disable = _clk_cko1_disable,
-};
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= getsetround##_get_rate,	\
+		.set_rate	= getsetround##_set_rate,	\
+		.round_rate	= getsetround##_round_rate,	\
+		.enable		= cgr_enable,			\
+		.disable	= cgr_disable,			\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
 
-static struct clk *mxc_clks[] = {
-	&ckih_clk,
-	&ckil_clk,
-	&mcu_pll_clk,
-	&usb_pll_clk,
-	&serial_pll_clk,
-	&mcu_main_clk,
-	&ahb_clk,
-	&per_clk,
-	&perclk_clk,
-	&cko1_clk,
-	&emi_clk,
-	&cspi_clk[0],
-	&cspi_clk[1],
-	&cspi_clk[2],
-	&ipg_clk,
-	&gpt_clk,
-	&pwm_clk,
-	&wdog_clk,
-	&rtc_clk,
-	&epit_clk[0],
-	&epit_clk[1],
-	&nfc_clk,
-	&ipu_clk,
-	&kpp_clk,
-	&usb_clk[0],
-	&usb_clk[1],
-	&csi_clk,
-	&uart_clk[0],
-	&uart_clk[1],
-	&uart_clk[2],
-	&uart_clk[3],
-	&uart_clk[4],
-	&i2c_clk[0],
-	&i2c_clk[1],
-	&i2c_clk[2],
-	&owire_clk,
-	&sdhc_clk[0],
-	&sdhc_clk[1],
-	&ssi_clk[0],
-	&ssi_clk[1],
-	&firi_clk,
-	&ata_clk,
-	&rtic_clk,
-	&rng_clk,
-	&sdma_clk[0],
-	&sdma_clk[1],
-	&mstick_clk[0],
-	&mstick_clk[1],
-	&scc_clk,
-	&iim_clk,
+DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
+	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
+	_REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mx3-camera.0", "csi", csi_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK(NULL, "firi", firi_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "rng", rng_clk)
+	_REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
 {
 	u32 reg;
-	struct clk **clkp;
+	int i;
 
 	mxc_set_cpu_type(MXC_CPU_MX31);
 
 	ckih_rate = fref;
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
-
-	if (cpu_is_mx31()) {
-		clk_register(&mpeg4_clk);
-		clk_register(&mbx_clk);
-	} else {
-		clk_register(&vpu_clk);
-		clk_register(&vl2cc_clk);
-	}
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	/* Turn off all possible clocks */
-	__raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+	__raw_writel((3 << 4), MXC_CCM_CGR0);
 	__raw_writel(0, MXC_CCM_CGR1);
-
-	__raw_writel(MXC_CCM_CGR2_EMI_MASK |
-		     MXC_CCM_CGR2_IPMUX1_MASK |
-		     MXC_CCM_CGR2_IPMUX2_MASK |
-		     MXC_CCM_CGR2_MXCCLKENSEL_MASK |	/* for MX32 */
-		     MXC_CCM_CGR2_CHIKCAMPEN_MASK |	/* for MX32 */
-		     MXC_CCM_CGR2_OVRVPUBUSY_MASK |	/* for MX32 */
+	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
 		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
 					   MX32, but still required to be set */
 		     MXC_CCM_CGR2);
 
-	clk_disable(&cko1_clk);
-	clk_disable(&usb_pll_clk);
+	usb_pll_disable(&usb_pll_clk);
 
 	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
 
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index 4a0e0ede23b..adfa3627ad8 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -91,47 +91,6 @@
 #define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
 #define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
 
-#define MXC_CCM_PDR0_HSP_DIV_1                  (0x0 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_2                  (0x1 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_3                  (0x2 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_4                  (0x3 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_5                  (0x4 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_6                  (0x5 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_7                  (0x6 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_8                  (0x7 << 11)
-
-#define MXC_CCM_PDR0_IPG_DIV_1                  (0x0 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_2                  (0x1 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_3                  (0x2 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_4                  (0x3 << 6)
-
-#define MXC_CCM_PDR0_MAX_DIV_1                  (0x0 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_2                  (0x1 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_3                  (0x2 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_4                  (0x3 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_5                  (0x4 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_6                  (0x5 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_7                  (0x6 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_8                  (0x7 << 3)
-
-#define MXC_CCM_PDR0_NFC_DIV_1                  (0x0 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_2                  (0x1 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_3                  (0x2 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_4                  (0x3 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_5                  (0x4 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_6                  (0x5 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_7                  (0x6 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_8                  (0x7 << 8)
-
-#define MXC_CCM_PDR0_MCU_DIV_1                  0x0
-#define MXC_CCM_PDR0_MCU_DIV_2                  0x1
-#define MXC_CCM_PDR0_MCU_DIV_3                  0x2
-#define MXC_CCM_PDR0_MCU_DIV_4                  0x3
-#define MXC_CCM_PDR0_MCU_DIV_5                  0x4
-#define MXC_CCM_PDR0_MCU_DIV_6                  0x5
-#define MXC_CCM_PDR0_MCU_DIV_7                  0x6
-#define MXC_CCM_PDR0_MCU_DIV_8                  0x7
-
 #define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
 #define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
 #define MXC_CCM_PDR1_USB_PODF_OFFSET            27
@@ -152,118 +111,6 @@
 /* Bit definitions for RCSR */
 #define MXC_CCM_RCSR_NF16B			0x80000000
 
-/* Bit definitions for both MCU, USB and SR PLL control registers */
-#define MXC_CCM_PCTL_BRM                        0x80000000
-#define MXC_CCM_PCTL_PD_OFFSET                  26
-#define MXC_CCM_PCTL_PD_MASK                    (0xF << 26)
-#define MXC_CCM_PCTL_MFD_OFFSET                 16
-#define MXC_CCM_PCTL_MFD_MASK                   (0x3FF << 16)
-#define MXC_CCM_PCTL_MFI_OFFSET                 10
-#define MXC_CCM_PCTL_MFI_MASK                   (0xF << 10)
-#define MXC_CCM_PCTL_MFN_OFFSET                 0
-#define MXC_CCM_PCTL_MFN_MASK                   0x3FF
-
-#define MXC_CCM_CGR0_SD_MMC1_OFFSET             0
-#define MXC_CCM_CGR0_SD_MMC1_MASK               (0x3 << 0)
-#define MXC_CCM_CGR0_SD_MMC2_OFFSET             2
-#define MXC_CCM_CGR0_SD_MMC2_MASK               (0x3 << 2)
-#define MXC_CCM_CGR0_GPT_OFFSET                 4
-#define MXC_CCM_CGR0_GPT_MASK                   (0x3 << 4)
-#define MXC_CCM_CGR0_EPIT1_OFFSET               6
-#define MXC_CCM_CGR0_EPIT1_MASK                 (0x3 << 6)
-#define MXC_CCM_CGR0_EPIT2_OFFSET               8
-#define MXC_CCM_CGR0_EPIT2_MASK                 (0x3 << 8)
-#define MXC_CCM_CGR0_IIM_OFFSET                 10
-#define MXC_CCM_CGR0_IIM_MASK                   (0x3 << 10)
-#define MXC_CCM_CGR0_ATA_OFFSET                 12
-#define MXC_CCM_CGR0_ATA_MASK                   (0x3 << 12)
-#define MXC_CCM_CGR0_SDMA_OFFSET                14
-#define MXC_CCM_CGR0_SDMA_MASK                  (0x3 << 14)
-#define MXC_CCM_CGR0_CSPI3_OFFSET               16
-#define MXC_CCM_CGR0_CSPI3_MASK                 (0x3 << 16)
-#define MXC_CCM_CGR0_RNG_OFFSET                 18
-#define MXC_CCM_CGR0_RNG_MASK                   (0x3 << 18)
-#define MXC_CCM_CGR0_UART1_OFFSET               20
-#define MXC_CCM_CGR0_UART1_MASK                 (0x3 << 20)
-#define MXC_CCM_CGR0_UART2_OFFSET               22
-#define MXC_CCM_CGR0_UART2_MASK                 (0x3 << 22)
-#define MXC_CCM_CGR0_SSI1_OFFSET                24
-#define MXC_CCM_CGR0_SSI1_MASK                  (0x3 << 24)
-#define MXC_CCM_CGR0_I2C1_OFFSET                26
-#define MXC_CCM_CGR0_I2C1_MASK                  (0x3 << 26)
-#define MXC_CCM_CGR0_I2C2_OFFSET                28
-#define MXC_CCM_CGR0_I2C2_MASK                  (0x3 << 28)
-#define MXC_CCM_CGR0_I2C3_OFFSET                30
-#define MXC_CCM_CGR0_I2C3_MASK                  (0x3 << 30)
-
-#define MXC_CCM_CGR1_HANTRO_OFFSET              0
-#define MXC_CCM_CGR1_HANTRO_MASK                (0x3 << 0)
-#define MXC_CCM_CGR1_MEMSTICK1_OFFSET           2
-#define MXC_CCM_CGR1_MEMSTICK1_MASK             (0x3 << 2)
-#define MXC_CCM_CGR1_MEMSTICK2_OFFSET           4
-#define MXC_CCM_CGR1_MEMSTICK2_MASK             (0x3 << 4)
-#define MXC_CCM_CGR1_CSI_OFFSET                 6
-#define MXC_CCM_CGR1_CSI_MASK                   (0x3 << 6)
-#define MXC_CCM_CGR1_RTC_OFFSET                 8
-#define MXC_CCM_CGR1_RTC_MASK                   (0x3 << 8)
-#define MXC_CCM_CGR1_WDOG_OFFSET                10
-#define MXC_CCM_CGR1_WDOG_MASK                  (0x3 << 10)
-#define MXC_CCM_CGR1_PWM_OFFSET                 12
-#define MXC_CCM_CGR1_PWM_MASK                   (0x3 << 12)
-#define MXC_CCM_CGR1_SIM_OFFSET                 14
-#define MXC_CCM_CGR1_SIM_MASK                   (0x3 << 14)
-#define MXC_CCM_CGR1_ECT_OFFSET                 16
-#define MXC_CCM_CGR1_ECT_MASK                   (0x3 << 16)
-#define MXC_CCM_CGR1_USBOTG_OFFSET              18
-#define MXC_CCM_CGR1_USBOTG_MASK                (0x3 << 18)
-#define MXC_CCM_CGR1_KPP_OFFSET                 20
-#define MXC_CCM_CGR1_KPP_MASK                   (0x3 << 20)
-#define MXC_CCM_CGR1_IPU_OFFSET                 22
-#define MXC_CCM_CGR1_IPU_MASK                   (0x3 << 22)
-#define MXC_CCM_CGR1_UART3_OFFSET               24
-#define MXC_CCM_CGR1_UART3_MASK                 (0x3 << 24)
-#define MXC_CCM_CGR1_UART4_OFFSET               26
-#define MXC_CCM_CGR1_UART4_MASK                 (0x3 << 26)
-#define MXC_CCM_CGR1_UART5_OFFSET               28
-#define MXC_CCM_CGR1_UART5_MASK                 (0x3 << 28)
-#define MXC_CCM_CGR1_OWIRE_OFFSET               30
-#define MXC_CCM_CGR1_OWIRE_MASK                 (0x3 << 30)
-
-#define MXC_CCM_CGR2_SSI2_OFFSET                0
-#define MXC_CCM_CGR2_SSI2_MASK                  (0x3 << 0)
-#define MXC_CCM_CGR2_CSPI1_OFFSET               2
-#define MXC_CCM_CGR2_CSPI1_MASK                 (0x3 << 2)
-#define MXC_CCM_CGR2_CSPI2_OFFSET               4
-#define MXC_CCM_CGR2_CSPI2_MASK                 (0x3 << 4)
-#define MXC_CCM_CGR2_GACC_OFFSET                6
-#define MXC_CCM_CGR2_GACC_MASK                  (0x3 << 6)
-#define MXC_CCM_CGR2_EMI_OFFSET                 8
-#define MXC_CCM_CGR2_EMI_MASK                   (0x3 << 8)
-#define MXC_CCM_CGR2_RTIC_OFFSET                10
-#define MXC_CCM_CGR2_RTIC_MASK                  (0x3 << 10)
-#define MXC_CCM_CGR2_FIRI_OFFSET                12
-#define MXC_CCM_CGR2_FIRI_MASK                  (0x3 << 12)
-#define MXC_CCM_CGR2_IPMUX1_OFFSET              14
-#define MXC_CCM_CGR2_IPMUX1_MASK                (0x3 << 14)
-#define MXC_CCM_CGR2_IPMUX2_OFFSET              16
-#define MXC_CCM_CGR2_IPMUX2_MASK                (0x3 << 16)
-
-/* These new CGR2 bits are added in MX32 */
-#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET	18
-#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK		(0x3 << 18)
-#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET	20
-#define MXC_CCM_CGR2_APMSSICLKSEL_MASK		(0x3 << 20)
-#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET	22
-#define MXC_CCM_CGR2_APMPERCLKSEL_MASK		(0x3 << 22)
-#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET		24
-#define MXC_CCM_CGR2_MXCCLKENSEL_MASK		(0x1 << 24)
-#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET		25
-#define MXC_CCM_CGR2_CHIKCAMPEN_MASK		(0x1 << 25)
-#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET		26
-#define MXC_CCM_CGR2_OVRVPUBUSY_MASK		(0x1 << 26)
-#define MXC_CCM_CGR2_APMENA_OFFSET		30
-#define MXC_CCM_CGR2_AOMENA_MASK		(0x1 << 30)
-
 /*
  * LTR0 register offsets
  */
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ed5ab8ed7cf..17d0e9906d5 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -22,6 +22,7 @@ config ARCH_MX2
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
-- 
cgit v1.2.3


From cc83e4096c6db1f13406c7dedf5516b4b5bcba55 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 19 Feb 2009 12:48:35 +0100
Subject: Use __force in IO_ADDRESS macro to silence sparse

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx3x.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 83a172b51b0..3878c6085d5 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -157,7 +157,7 @@
  * it returns 0xDEADBEEF
  */
 #define IO_ADDRESS(x)   \
-	(void __iomem *) \
+	(void __force __iomem *) \
 	(((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
 	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
 	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
-- 
cgit v1.2.3


From 1a02be0ee77b68aef67b656bc47f0fb4ab177e67 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:07 +0100
Subject: MX2: Add SDHC platform_devices and resources

Signed-of-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 66 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  2 ++
 2 files changed, 68 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 7d12c2c4108..f81aa8a8fbb 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -35,6 +35,7 @@
 #include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/mmc.h>
 
 #include "devices.h"
 
@@ -343,6 +344,71 @@ struct platform_device mxc_pwm_device = {
 	.resource = mxc_pwm_resources
 };
 
+/*
+ * Resource definition for the MXC SDHC
+ */
+static struct resource mxc_sdhc1_resources[] = {
+	[0] = {
+			.start = SDHC1_BASE_ADDR,
+			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+			},
+	[1] = {
+			.start = MXC_INT_SDHC1,
+			.end   = MXC_INT_SDHC1,
+			.flags = IORESOURCE_IRQ,
+			},
+	[2] = {
+			.start  = DMA_REQ_SDHC1,
+			.end    = DMA_REQ_SDHC1,
+			.flags  = IORESOURCE_DMA
+		},
+};
+
+static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device0 = {
+       .name           = "mxc-mmc",
+       .id             = 0,
+       .dev            = {
+               .dma_mask = &mxc_sdhc1_dmamask,
+               .coherent_dma_mask = 0xffffffff,
+       },
+       .num_resources  = ARRAY_SIZE(mxc_sdhc1_resources),
+       .resource       = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_sdhc2_resources[] = {
+	[0] = {
+			.start = SDHC2_BASE_ADDR,
+			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+			},
+	[1] = {
+			.start = MXC_INT_SDHC2,
+			.end   = MXC_INT_SDHC2,
+			.flags = IORESOURCE_IRQ,
+			},
+	[2] = {
+			.start  = DMA_REQ_SDHC2,
+			.end    = DMA_REQ_SDHC2,
+			.flags  = IORESOURCE_DMA
+		},
+};
+
+static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device1 = {
+       .name           = "mxc-mmc",
+       .id             = 1,
+       .dev            = {
+               .dma_mask = &mxc_sdhc2_dmamask,
+               .coherent_dma_mask = 0xffffffff,
+       },
+       .num_resources  = ARRAY_SIZE(mxc_sdhc2_resources),
+       .resource       = mxc_sdhc2_resources,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 271ab1e6982..049005bb6aa 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -18,3 +18,5 @@ extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
-- 
cgit v1.2.3


From 2adc1d654e41f4308193fdd46cee885b7a35c149 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:06 +0100
Subject: MX31: Add sdhc resources/platform devices

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 40 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  2 ++
 2 files changed, 42 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index ab090602cea..380be0c9b21 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -245,6 +245,46 @@ struct platform_device mxc_i2c_device2 = {
 	.resource = mxc_i2c2_resources,
 };
 
+#ifdef CONFIG_ARCH_MX31
+static struct resource mxcsdhc0_resources[] = {
+	{
+		.start = MMC_SDHC1_BASE_ADDR,
+		.end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_MMC_SDHC1,
+		.end = MXC_INT_MMC_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxcsdhc1_resources[] = {
+	{
+		.start = MMC_SDHC2_BASE_ADDR,
+		.end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_MMC_SDHC2,
+		.end = MXC_INT_MMC_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxcsdhc_device0 = {
+	.name = "mxc-mmc",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxcsdhc0_resources),
+	.resource = mxcsdhc0_resources,
+};
+
+struct platform_device mxcsdhc_device1 = {
+	.name = "mxc-mmc",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
+	.resource = mxcsdhc1_resources,
+};
+#endif /* CONFIG_ARCH_MX31 */
+
 /* i.MX31 Image Processing Unit */
 
 /* The resource order is important! */
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 4faac6552e0..88c04b296fa 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -12,3 +12,5 @@ extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mxc_fec_device;
+extern struct platform_device mxcsdhc_device0;
+extern struct platform_device mxcsdhc_device1;
-- 
cgit v1.2.3


From f2cb641f565dccebfa934b1a940bc6517734d391 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 11 Nov 2008 15:03:28 +0100
Subject: pcm037: Add sdhc support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 7743c13beba..5fce022114d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -39,6 +39,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/board-pcm037.h>
 #include <mach/mxc_nand.h>
+#include <mach/mmc.h>
 #ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
 #endif
@@ -162,6 +163,32 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 };
 #endif
 
+static int sdhc1_pins[] = {
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+};
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+{
+	return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
+				"sdhc-1");
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+	mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+}
+
+/* No card and rw detection at the moment */
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pcm970_sdhc1_init,
+	.exit = pcm970_sdhc1_exit,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_eth,
@@ -208,6 +235,7 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
 #endif
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 }
 
 static void __init pcm037_timer_init(void)
-- 
cgit v1.2.3


From 7c107dcb652c2101426adfc3193140db95b44594 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:07 +0100
Subject: pcm970 baseboard: Add SDHC support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 63 ++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 232e0416f15..bf4e520bc1b 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,16 +17,78 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
 
 #include <asm/mach/arch.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
+#include <mach/mmc.h>
 #include <mach/imxfb.h>
 #include <mach/iomux.h>
 
 #include "devices.h"
 
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
+static int pcm970_sdhc2_pins[] = {
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
+		ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
+	if(ret)
+		return ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+				"imx-mmc-detect", data);
+	if (ret)
+		goto out_release_gpio;
+
+	set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+
+	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
+	if (ret)
+		goto out_release_gpio;
+
+	mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
+	gpio_direction_input(GPIO_PORTC + 28);
+
+	return 0;
+
+out_release_gpio:
+	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+			ARRAY_SIZE(pcm970_sdhc2_pins));
+	return ret;
+}
+
+static void pcm970_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+	gpio_free(GPIO_PORTC + 28);
+	mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+			ARRAY_SIZE(pcm970_sdhc2_pins));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = pcm970_sdhc2_get_ro,
+	.init = pcm970_sdhc2_init,
+	.exit = pcm970_sdhc2_exit,
+};
+
 static int mxc_fb_pins[] = {
 	PA5_PF_LSCLK,	PA6_PF_LD0,	PA7_PF_LD1,	PA8_PF_LD2,
 	PA9_PF_LD3,	PA10_PF_LD4,	PA11_PF_LD5,	PA12_PF_LD6,
@@ -96,4 +158,5 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 void __init pcm970_baseboard_init(void)
 {
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 }
-- 
cgit v1.2.3


From 148854c65ea8046b045672fd49f4333aefaa3ab5 Mon Sep 17 00:00:00 2001
From: Ilya Yanok <yanok@emcraft.com>
Date: Wed, 11 Mar 2009 03:22:00 +0300
Subject: qong: basic support for Dave/DENX QongEVB-LITE board

This patch adds basic support for Dave/DENX QongEVB-LITE i.MX31-based
board. It includes support for clocks initialization, UART1, NOR-flash,
FPGA-attached NAND flash and DNET ethernet controller (inside FPGA).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Kconfig                    |   8 +
 arch/arm/mach-mx3/Makefile                   |   1 +
 arch/arm/mach-mx3/qong.c                     | 312 +++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/board-qong.h  |  22 ++
 arch/arm/plat-mxc/include/mach/debug-macro.S |   3 +
 5 files changed, 346 insertions(+)
 create mode 100644 arch/arm/mach-mx3/qong.c
 create mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 7c939c69d6d..d6235583e97 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -56,4 +56,12 @@ config MACH_MX31MOBOARD
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select ARCH_MX31
+	default n
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index ab0bec0a4d9..272c8a953b3 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
+obj-$(CONFIG_MACH_QONG)		+= qong.o
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
new file mode 100644
index 00000000000..6c4283cec6f
--- /dev/null
+++ b/arch/arm/mach-mx3/qong.c
@@ -0,0 +1,312 @@
+/*
+ *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/board-qong.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev)	\
+	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR 		CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE 		0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION		0x00
+
+#define QONG_DNET_ID		1
+#define QONG_DNET_BASEADDR	\
+	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE 		0x00001000
+
+#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+			"uart-0");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+	[0] = {
+		.name	= "dnet-memory",
+		.start	= QONG_DNET_BASEADDR,
+		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= QONG_FPGA_IRQ,
+		.end	= QONG_FPGA_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dnet_device = {
+	.name			= "dnet",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(dnet_resources),
+	.resource		= dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+	int ret;
+
+	ret = platform_device_register(&dnet_device);
+	return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+	.width = 2,
+};
+
+static struct resource qong_flash_resource = {
+	.start = CS0_BASE_ADDR,
+	.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &qong_flash_data,
+		},
+	.resource = &qong_flash_resource,
+	.num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+	(void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+	else
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip >= 0)
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+	else
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+	.chip = {
+		.chip_delay		= 20,
+		.options		= 0,
+	},
+	.ctrl = {
+		.cmd_ctrl 		= qong_nand_cmd_ctrl,
+		.dev_ready		= qong_nand_device_ready,
+		.select_chip		= qong_nand_select_chip,
+	}
+};
+
+static struct resource qong_nand_resource = {
+	.start  	= CS3_BASE_ADDR,
+	.end    	= CS3_BASE_ADDR + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &qong_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+	/* init CS */
+	__raw_writel(0x00004f00, CSCR_U(3));
+	__raw_writel(0x20013b31, CSCR_L(3));
+	__raw_writel(0x00020800, CSCR_A(3));
+	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+	/* enable pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+	/* ready/busy pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+	/* write protect pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+	platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+	void __iomem *regs;
+	u32 fpga_ver;
+
+	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+				__func__);
+		return;
+	}
+
+	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+	iounmap(regs);
+	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+			(fpga_ver & 0xF000) >> 12,
+			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+				"devices won't be registered!\n");
+		return;
+	}
+
+	/* register FPGA-based devices */
+	qong_init_nand_mtd();
+	qong_init_dnet();
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc qong_io_desc[] __initdata = {
+	{
+		.virtual = AIPS1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length = AIPS1_SIZE,
+		.type = MT_DEVICE_NONSHARED
+	}, {
+		.virtual = AIPS2_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length = AIPS2_SIZE,
+		.type = MT_DEVICE_NONSHARED
+	}
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init qong_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_init_imx_uart();
+	qong_init_nor_mtd();
+	qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+	.init	= qong_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_QONG data structure.
+ */
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+	/* Maintainer: DENX Software Engineering GmbH */
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = qong_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &qong_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
new file mode 100644
index 00000000000..4ff762dd45c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
+#define __ASM_ARCH_MXC_BOARD_QONG_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+/* NOR FLASH */
+#define QONG_NOR_SIZE		(128*1024*1024)
+
+#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 602768b427e..4f773148bc2 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -30,6 +30,9 @@
 #endif
 #ifdef CONFIG_MACH_MX31_3DS
 #include <mach/board-mx31pdk.h>
+#endif
+#ifdef CONFIG_MACH_QONG
+#include <mach/board-qong.h>
 #endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
-- 
cgit v1.2.3


From f84e85ef3ccedd450d2dd266798c97b05b7b3563 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sun, 15 Mar 2009 19:04:56 +0100
Subject: [ARM] 5423/1: SA1100: remove unused H3600_SLEEVE Kconfig option

There's no actual code for iPAQ sleeves support in kernel that depends
on this config option.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/h3600_defconfig | 1 -
 arch/arm/mach-sa1100/Kconfig     | 9 ---------
 2 files changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index f2e16fd0a6b..1502957db2c 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -99,7 +99,6 @@ CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_SHANNON is not set
 # CONFIG_SA1100_SIMPAD is not set
 # CONFIG_SA1100_SSP is not set
-# CONFIG_H3600_SLEEVE is not set
 
 #
 # Processor Type
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index bfc38e31518..81ffff7ed49 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -147,15 +147,6 @@ config SA1100_SSP
 	  This isn't for audio support, but for attached sensors and
 	  other devices, eg for BadgePAD 4 sensor support.
 
-config H3600_SLEEVE
-	tristate "Compaq iPAQ Handheld sleeve support"
-	depends on SA1100_H3100 || SA1100_H3600
-	help
-	  Choose this option to enable support for extension packs (sleeves)
-	  for the Compaq iPAQ H3XXX series of handheld computers.  This option
-	  is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
-	  packs.
-
 endmenu
 
 endif
-- 
cgit v1.2.3


From f110b3f2a61d26329290036dac3d70a6733099de Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sun, 15 Mar 2009 19:09:50 +0100
Subject: [ARM] 5424/1: h3600: clean up mtd partitions table

Right now iPaq h3600's default MTD partitions table is a mess. It has
two #ifdefs with #else, giving total 3 variants, depending on your
kernel config. Replace all this with simple two-partitions scheme
(bootloader + rootfs), that used by both shipped WindowsCE and
most of the linux distributions (Familiar, Angstrom)

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/h3600.c | 34 +---------------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index b9aaa45c6ca..4920b89d149 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -56,41 +56,9 @@ static struct mtd_partition h3xxx_partitions[] = {
 		.offset		= 0,
 		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
 	}, {
-#ifdef CONFIG_MTD_2PARTS_IPAQ
-		.name		= "H3XXX root jffs2",
+		.name		= "H3XXX rootfs",
 		.size		= MTDPART_SIZ_FULL,
 		.offset		= 0x00040000,
-#else
-		.name		= "H3XXX kernel",
-		.size		= 0x00080000,
-		.offset		= 0x00040000,
-	}, {
-		.name		= "H3XXX params",
-		.size		= 0x00040000,
-		.offset		= 0x000C0000,
-	}, {
-#ifdef CONFIG_JFFS2_FS
-		.name		= "H3XXX root jffs2",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00100000,
-#else
-		.name		= "H3XXX initrd",
-		.size		= 0x00100000,
-		.offset		= 0x00100000,
-	}, {
-		.name		= "H3XXX root cramfs",
-		.size		= 0x00300000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "H3XXX usr cramfs",
-		.size		= 0x00800000,
-		.offset		= 0x00500000,
-	}, {
-		.name		= "H3XXX usr local",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00d00000,
-#endif
-#endif
 	}
 };
 
-- 
cgit v1.2.3


From ddcd8c09001e66f78488bfc238ed5bd8441d4496 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sun, 15 Mar 2009 19:11:21 +0100
Subject: [ARM] 5425/1: h3600: first stage of ipaq_model_ops cleanup

Remove unused fields and associated funtions-accesors.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/h3600.c              | 38 -------------------------
 arch/arm/mach-sa1100/include/mach/h3600.h | 46 -------------------------------
 2 files changed, 84 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 4920b89d149..9f13f5bd57a 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -227,12 +227,6 @@ static void __init h3xxx_map_io(void)
 	sa1100fb_lcd_power = h3xxx_lcd_power;
 }
 
-static __inline__ void do_blank(int setp)
-{
-	if (ipaq_model_ops.blank_callback)
-		ipaq_model_ops.blank_callback(1-setp);
-}
-
 /************************* H3100 *************************/
 
 #ifdef CONFIG_SA1100_H3100
@@ -250,7 +244,6 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
 	case IPAQ_EGPIO_LCD_POWER:
 		egpio |= EGPIO_H3600_LCD_ON;
 		gpio  |= GPIO_H3100_LCD_3V_ON;
-		do_blank(setp);
 		break;
 	case IPAQ_EGPIO_LCD_ENABLE:
 		break;
@@ -304,23 +297,8 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
 	}
 }
 
-static unsigned long h3100_read_egpio(void)
-{
-	return h3100_egpio;
-}
-
-static int h3100_pm_callback(int req)
-{
-	if (ipaq_model_ops.pm_callback_aux)
-		return ipaq_model_ops.pm_callback_aux(req);
-	return 0;
-}
-
 static struct ipaq_model_ops h3100_model_ops __initdata = {
-	.generic_name	= "3100",
 	.control	= h3100_control_egpio,
-	.read		= h3100_read_egpio,
-	.pm_callback	= h3100_pm_callback
 };
 
 #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
@@ -381,7 +359,6 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
 			 EGPIO_H3600_LCD_PCI |
 			 EGPIO_H3600_LCD_5V_ON |
 			 EGPIO_H3600_LVDD_ON;
-		do_blank(setp);
 		break;
 	case IPAQ_EGPIO_LCD_ENABLE:
 		break;
@@ -432,23 +409,8 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
 	}
 }
 
-static unsigned long h3600_read_egpio(void)
-{
-	return h3600_egpio;
-}
-
-static int h3600_pm_callback(int req)
-{
-	if (ipaq_model_ops.pm_callback_aux)
-		return ipaq_model_ops.pm_callback_aux(req);
-	return 0;
-}
-
 static struct ipaq_model_ops h3600_model_ops __initdata = {
-	.generic_name	= "3600",
 	.control	= h3600_control_egpio,
-	.read		= h3600_read_egpio,
-	.pm_callback	= h3600_pm_callback
 };
 
 static void __init h3600_map_io(void)
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index e692ab3dd79..8e8ccfc2f46 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -94,21 +94,11 @@ enum ipaq_egpio_type {
 };
 
 struct ipaq_model_ops {
-	const char     *generic_name;
 	void	      (*control)(enum ipaq_egpio_type, int);
-	unsigned long (*read)(void);
-	void	      (*blank_callback)(int blank);
-	int	      (*pm_callback)(int req);	    /* Primary model callback */
-	int	      (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
 };
 
 extern struct ipaq_model_ops ipaq_model_ops;
 
-static __inline__ const char * h3600_generic_name(void)
-{
-	return ipaq_model_ops.generic_name;
-}
-
 static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
 {
 	if (ipaq_model_ops.control)
@@ -127,42 +117,6 @@ static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
 		ipaq_model_ops.control(x,1);
 }
 
-static __inline__ unsigned long read_h3600_egpio(void)
-{
-	if (ipaq_model_ops.read)
-		return ipaq_model_ops.read();
-	return 0;
-}
-
-static __inline__ int  h3600_register_blank_callback(void (*f)(int))
-{
-	ipaq_model_ops.blank_callback = f;
-	return 0;
-}
-
-static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
-{
-	ipaq_model_ops.blank_callback = NULL;
-}
-
-
-static __inline__ int  h3600_register_pm_callback(int (*f)(int))
-{
-	ipaq_model_ops.pm_callback_aux = f;
-	return 0;
-}
-
-static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
-{
-	ipaq_model_ops.pm_callback_aux = NULL;
-}
-
-static __inline__ int h3600_power_management(int req)
-{
-	if (ipaq_model_ops.pm_callback)
-		return ipaq_model_ops.pm_callback(req);
-	return 0;
-}
 
 #endif /* ASSEMBLY */
 
-- 
cgit v1.2.3


From 104a416d80fca22284319b06eff87b6f632a3649 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sun, 15 Mar 2009 19:13:16 +0100
Subject: [ARM] 5426/1: h3600: remove clr_h3600_egpio/set_h3600_egpio helpers

Replace all occurences with assign_h3600_egpio.
Also simplify code a bit by replacing couple of if-else
statements with one-line equivalents.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/h3600.c              |  6 +-----
 arch/arm/mach-sa1100/include/mach/h3600.h | 13 -------------
 2 files changed, 1 insertion(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 9f13f5bd57a..1fa0f58c07b 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -92,11 +92,7 @@ static int h3600_irda_set_power(struct device *dev, unsigned int state)
 
 static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 {
-	if (speed < 4000000) {
-		clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
-	} else {
-		set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
-	}
+	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
 }
 
 static struct irda_platform_data h3600_irda_data = {
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 8e8ccfc2f46..33fc4bcfd3e 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -105,19 +105,6 @@ static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
 		ipaq_model_ops.control(x,level);
 }
 
-static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,0);
-}
-
-static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,1);
-}
-
-
 #endif /* ASSEMBLY */
 
 #endif /* _INCLUDE_H3600_H_ */
-- 
cgit v1.2.3


From 607b067e161185d5c441aa366ff9fccd4fd676cb Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sun, 15 Mar 2009 19:14:27 +0100
Subject: [ARM] 5427/1: h3600: ipaq_model_ops final cleanup

Since now ipaq_model_ops used only for accessing h3600 EGPIOs,
drop it completely and use assign_h3600_egpio() directly.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/h3600.c              | 16 ++++------------
 arch/arm/mach-sa1100/include/mach/h3600.h | 12 +-----------
 2 files changed, 5 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 1fa0f58c07b..0eb2f159578 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -46,8 +46,8 @@
 
 #include "generic.h"
 
-struct ipaq_model_ops ipaq_model_ops;
-EXPORT_SYMBOL(ipaq_model_ops);
+void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
+EXPORT_SYMBOL(assign_h3600_egpio);
 
 static struct mtd_partition h3xxx_partitions[] = {
 	{
@@ -293,10 +293,6 @@ static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
 	}
 }
 
-static struct ipaq_model_ops h3100_model_ops __initdata = {
-	.control	= h3100_control_egpio,
-};
-
 #define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
 			  | GPIO_H3100_GPIO3	  \
 			  | GPIO_H3100_QMUTE	  \
@@ -322,7 +318,7 @@ static void __init h3100_map_io(void)
 	GAFR &= ~H3100_DIRECT_EGPIO;
 
 	H3100_EGPIO = h3100_egpio;
-	ipaq_model_ops = h3100_model_ops;
+	assign_h3600_egpio = h3100_control_egpio;
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
@@ -405,10 +401,6 @@ static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
 	}
 }
 
-static struct ipaq_model_ops h3600_model_ops __initdata = {
-	.control	= h3600_control_egpio,
-};
-
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
@@ -423,7 +415,7 @@ static void __init h3600_map_io(void)
 	       GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
 
 	H3600_EGPIO = h3600_egpio;	   /* Maintains across sleep? */
-	ipaq_model_ops = h3600_model_ops;
+	assign_h3600_egpio = h3600_control_egpio;
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 33fc4bcfd3e..2827faa4742 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -93,17 +93,7 @@ enum ipaq_egpio_type {
 	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
 };
 
-struct ipaq_model_ops {
-	void	      (*control)(enum ipaq_egpio_type, int);
-};
-
-extern struct ipaq_model_ops ipaq_model_ops;
-
-static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,level);
-}
+extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
 
 #endif /* ASSEMBLY */
 
-- 
cgit v1.2.3


From 5f0fbf9ecaf354fa4bbf266fffdea2ea3d14a0ed Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 16 Sep 2008 13:05:53 -0400
Subject: [ARM] fixmap support

This is the minimum fixmap interface expected to be implemented by
architectures supporting highmem.

We have a second level page table already allocated and covering
0xfff00000-0xffffffff because the exception vector page is located
at 0xffff0000, and various cache tricks already use some entries above
0xffff0000.  Therefore the PTEs covering 0xfff00000-0xfffeffff are free
to be used.

However the XScale cache flushing code already uses virtual addresses
between 0xfffe0000 and 0xfffeffff.

So this reserves the 0xfff00000-0xfffdffff range for fixmap stuff.

The Documentation/arm/memory.txt information is updated accordingly,
including the information about the actual top of DMA memory mapping
region which didn't match the code.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/include/asm/fixmap.h | 41 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mm/mm.h              |  3 +--
 2 files changed, 42 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/include/asm/fixmap.h

(limited to 'arch')

diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h
new file mode 100644
index 00000000000..bbae919bceb
--- /dev/null
+++ b/arch/arm/include/asm/fixmap.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * Nothing too fancy for now.
+ *
+ * On ARM we already have well known fixed virtual addresses imposed by
+ * the architecture such as the vector page which is located at 0xffff0000,
+ * therefore a second level page table is already allocated covering
+ * 0xfff00000 upwards.
+ *
+ * The cache flushing code in proc-xscale.S uses the virtual area between
+ * 0xfffe0000 and 0xfffeffff.
+ */
+
+#define FIXADDR_START		0xfff00000UL
+#define FIXADDR_TOP		0xfffe0000UL
+#define FIXADDR_SIZE		(FIXADDR_TOP - FIXADDR_START)
+
+#define FIX_KMAP_BEGIN		0
+#define FIX_KMAP_END		(FIXADDR_SIZE >> PAGE_SHIFT)
+
+#define __fix_to_virt(x)	(FIXADDR_START + ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	(((x) - FIXADDR_START) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	if (idx >= FIX_KMAP_END)
+		__this_fixmap_does_not_exist();
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned int virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 95bbe112965..c4f6f05198e 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -1,7 +1,6 @@
-/* the upper-most page table pointer */
-
 #ifdef CONFIG_MMU
 
+/* the upper-most page table pointer */
 extern pmd_t *top_pmd;
 
 #define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-- 
cgit v1.2.3


From d73cd42893f4cdc06e6829fea2347bb92cb789d1 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 15 Sep 2008 16:44:55 -0400
Subject: [ARM] kmap support

The kmap virtual area borrows a 2MB range at the top of the 16MB area
below PAGE_OFFSET currently reserved for kernel modules and/or the
XIP kernel.  This 2MB corresponds to the range covered by 2 consecutive
second-level page tables, or a single pmd entry as seen by the Linux
page table abstraction.  Because XIP kernels are unlikely to be seen
on systems needing highmem support, there shouldn't be any shortage of
VM space for modules (14 MB for modules is still way more than twice the
typical usage).

Because the virtual mapping of highmem pages can go away at any moment
after kunmap() is called on them, we need to bypass the delayed cache
flushing provided by flush_dcache_page() in that case.

The atomic kmap versions are based on fixmaps, and
__cpuc_flush_dcache_page() is used directly in that case.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/include/asm/highmem.h |  28 ++++++++++
 arch/arm/include/asm/memory.h  |  13 +++--
 arch/arm/mm/Makefile           |   1 +
 arch/arm/mm/flush.c            |   2 +-
 arch/arm/mm/highmem.c          | 116 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mm/mmu.c              |  13 +++++
 6 files changed, 169 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/include/asm/highmem.h
 create mode 100644 arch/arm/mm/highmem.c

(limited to 'arch')

diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
new file mode 100644
index 00000000000..023d5b37454
--- /dev/null
+++ b/arch/arm/include/asm/highmem.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#include <asm/kmap_types.h>
+
+#define PKMAP_BASE		(PAGE_OFFSET - PMD_SIZE)
+#define LAST_PKMAP		PTRS_PER_PTE
+#define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
+#define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define kmap_prot		PAGE_KERNEL
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+extern pte_t *pkmap_page_table;
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *kmap_atomic_to_page(const void *ptr);
+
+#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 0202a7c20e6..ae472bc376d 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,13 +44,20 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
-#define MODULES_END		(PAGE_OFFSET)
-#define MODULES_VADDR		(MODULES_END - 16*1048576)
-
+#define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
 
+/*
+ * The highmem pkmap virtual space shares the end of the module area.
+ */
+#ifdef CONFIG_HIGHMEM
+#define MODULES_END		(PAGE_OFFSET - PMD_SIZE)
+#else
+#define MODULES_END		(PAGE_OFFSET)
+#endif
+
 /*
  * The XIP kernel gets mapped at the bottom of the module vm area.
  * Since we use sections to map it, this macro replaces the physical address
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a3611..185e7dc7dcf 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MODULES)		+= proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
 obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
+obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
 obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
 obj-$(CONFIG_CPU_ABRT_EV4)	+= abort-ev4.o
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 0fa9bf388f0..4e283481cee 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -192,7 +192,7 @@ void flush_dcache_page(struct page *page)
 	struct address_space *mapping = page_mapping(page);
 
 #ifndef CONFIG_SMP
-	if (mapping && !mapping_mapped(mapping))
+	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
 	else
 #endif
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
new file mode 100644
index 00000000000..a34954d9df7
--- /dev/null
+++ b/arch/arm/mm/highmem.c
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mm/highmem.c -- ARM highmem support
+ *
+ * Author:	Nicolas Pitre
+ * Created:	september 8, 2008
+ * Copyright:	Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
+
+void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+EXPORT_SYMBOL(kunmap);
+
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	idx = type + KM_TYPE_NR * smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * With debugging enabled, kunmap_atomic forces that entry to 0.
+	 * Make sure it was indeed properly unmapped.
+	 */
+	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+	set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0);
+	/*
+	 * When debugging is off, kunmap_atomic leaves the previous mapping
+	 * in place, so this TLB flush ensures the TLB is updated with the
+	 * new mapping.
+	 */
+	local_flush_tlb_kernel_page(vaddr);
+
+	return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
+
+	if (kvaddr >= (void *)FIXADDR_START) {
+		__cpuc_flush_dcache_page((void *)vaddr);
+#ifdef CONFIG_DEBUG_HIGHMEM
+		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+		set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
+		local_flush_tlb_kernel_page(vaddr);
+#else
+		(void) idx;  /* to kill a warning */
+#endif
+	}
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
+
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	pagefault_disable();
+
+	idx = type + KM_TYPE_NR * smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+	set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0);
+	local_flush_tlb_kernel_page(vaddr);
+
+	return (void *)vaddr;
+}
+
+struct page *kmap_atomic_to_page(const void *ptr)
+{
+	unsigned long vaddr = (unsigned long)ptr;
+	pte_t *pte;
+
+	if (vaddr < FIXADDR_START)
+		return virt_to_page(ptr);
+
+	pte = TOP_PTE(vaddr);
+	return pte_page(*pte);
+}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index d4d082c5c2d..4810a4c9ffc 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -21,6 +21,7 @@
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
+#include <asm/highmem.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -895,6 +896,17 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	flush_cache_all();
 }
 
+static void __init kmap_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+	pmd_t *pmd = pmd_off_k(PKMAP_BASE);
+	pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
+	BUG_ON(!pmd_none(*pmd) || !pte);
+	__pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
+	pkmap_page_table = pte + PTRS_PER_PTE;
+#endif
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
@@ -908,6 +920,7 @@ void __init paging_init(struct machine_desc *mdesc)
 	prepare_page_table();
 	bootmem_init();
 	devicemaps_init(mdesc);
+	kmap_init();
 
 	top_pmd = pmd_off_k(0xffff0000);
 
-- 
cgit v1.2.3


From 3835f6cb645bdb9a58aa6e062fe1d5777f1a9748 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Wed, 17 Sep 2008 15:21:55 -0400
Subject: [ARM] mem_init(): make highmem pages available for use

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mm/init.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 80fd3b69ae1..8277802ec85 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/highmem.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
@@ -485,7 +486,7 @@ void __init mem_init(void)
 	int i, node;
 
 #ifndef CONFIG_DISCONTIGMEM
-	max_mapnr   = virt_to_page(high_memory) - mem_map;
+	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
 #endif
 
 	/* this will put all unused low memory onto the freelists */
@@ -504,6 +505,19 @@ void __init mem_init(void)
 				    __phys_to_pfn(__pa(swapper_pg_dir)), NULL);
 #endif
 
+#ifdef CONFIG_HIGHMEM
+	/* set highmem page free */
+	for_each_online_node(node) {
+		for_each_nodebank (i, &meminfo, node) {
+			unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+			unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+			if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+				totalhigh_pages += free_area(start, end, NULL);
+		}
+	}
+	totalram_pages += totalhigh_pages;
+#endif
+
 	/*
 	 * Since our memory may not be contiguous, calculate the
 	 * real number of pages we have in this system
@@ -521,9 +535,10 @@ void __init mem_init(void)
 	initsize = __init_end - __init_begin;
 
 	printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
-		"%dK data, %dK init)\n",
+		"%dK data, %dK init, %luK highmem)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		codesize >> 10, datasize >> 10, initsize >> 10);
+		codesize >> 10, datasize >> 10, initsize >> 10,
+		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
 
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
 		extern int sysctl_overcommit_memory;
-- 
cgit v1.2.3


From 43377453af83b8ff8c1c731da1508bd6b84ebfea Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 12 Mar 2009 22:52:09 -0400
Subject: [ARM] introduce dma_cache_maint_page()

This is a helper to be used by the DMA mapping API to handle cache
maintenance for memory identified by a page structure instead of a
virtual address.  Those pages may or may not be highmem pages, and
when they're highmem pages, they may or may not be virtually mapped.
When they're not mapped then there is no L1 cache to worry about. But
even in that case the L2 cache must be processed since unmapped highmem
pages can still be L2 cached.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/include/asm/dma-mapping.h |  4 ++-
 arch/arm/include/asm/highmem.h     |  3 ++
 arch/arm/mm/dma-mapping.c          | 72 +++++++++++++++++++++++++++++++++++++-
 3 files changed, 77 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 22cb14ec343..59fa762e9c6 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -57,6 +57,8 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
 extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+extern void dma_cache_maint_page(struct page *page, unsigned long offset,
+				 size_t size, int rw);
 
 /*
  * Return whether the given device DMA address mask can be supported
@@ -316,7 +318,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	BUG_ON(!valid_dma_direction(dir));
 
 	if (!arch_is_coherent())
-		dma_cache_maint(page_address(page) + offset, size, dir);
+		dma_cache_maint_page(page, offset, size, dir);
 
 	return page_to_dma(dev, page) + offset;
 }
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 023d5b37454..7f36d00600b 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -15,7 +15,10 @@
 
 extern pte_t *pkmap_page_table;
 
+#define ARCH_NEEDS_KMAP_HIGH_GET
+
 extern void *kmap_high(struct page *page);
+extern void *kmap_high_get(struct page *page);
 extern void kunmap_high(struct page *page);
 
 extern void *kmap(struct page *page);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index f1ef5613ccd..510c179b0ac 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -19,6 +19,7 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/memory.h>
+#include <asm/highmem.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
@@ -517,6 +518,74 @@ void dma_cache_maint(const void *start, size_t size, int direction)
 }
 EXPORT_SYMBOL(dma_cache_maint);
 
+static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
+				       size_t size, int direction)
+{
+	void *vaddr;
+	unsigned long paddr;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);
+
+	switch (direction) {
+	case DMA_FROM_DEVICE:		/* invalidate only */
+		inner_op = dmac_inv_range;
+		outer_op = outer_inv_range;
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		inner_op = dmac_clean_range;
+		outer_op = outer_clean_range;
+		break;
+	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
+		inner_op = dmac_flush_range;
+		outer_op = outer_flush_range;
+		break;
+	default:
+		BUG();
+	}
+
+	if (!PageHighMem(page)) {
+		vaddr = page_address(page) + offset;
+		inner_op(vaddr, vaddr + size);
+	} else {
+		vaddr = kmap_high_get(page);
+		if (vaddr) {
+			vaddr += offset;
+			inner_op(vaddr, vaddr + size);
+			kunmap_high(page);
+		}
+	}
+
+	paddr = page_to_phys(page) + offset;
+	outer_op(paddr, paddr + size);
+}
+
+void dma_cache_maint_page(struct page *page, unsigned long offset,
+			  size_t size, int dir)
+{
+	/*
+	 * A single sg entry may refer to multiple physically contiguous
+	 * pages.  But we still need to process highmem pages individually.
+	 * If highmem is not configured then the bulk of this loop gets
+	 * optimized out.
+	 */
+	size_t left = size;
+	do {
+		size_t len = left;
+		if (PageHighMem(page) && len + offset > PAGE_SIZE) {
+			if (offset >= PAGE_SIZE) {
+				page += offset / PAGE_SIZE;
+				offset %= PAGE_SIZE;
+			}
+			len = PAGE_SIZE - offset;
+		}
+		dma_cache_maint_contiguous(page, offset, len, dir);
+		offset = 0;
+		page++;
+		left -= len;
+	} while (left);
+}
+EXPORT_SYMBOL(dma_cache_maint_page);
+
 /**
  * dma_map_sg - map a set of SG buffers for streaming mode DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
@@ -614,7 +683,8 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 			continue;
 
 		if (!arch_is_coherent())
-			dma_cache_maint(sg_virt(s), s->length, dir);
+			dma_cache_maint_page(sg_page(s), s->offset,
+					     s->length, dir);
 	}
 }
 EXPORT_SYMBOL(dma_sync_sg_for_device);
-- 
cgit v1.2.3


From 58edb515724f9e63e569536d01ac8d8f8ddb367a Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 9 Sep 2008 15:54:13 -0400
Subject: [ARM] make page_to_dma() highmem aware

If a machine class has a custom __virt_to_bus() implementation then it
must provide a __arch_page_to_dma() implementation as well which is
_not_ based on page_address() to support highmem.

This patch fixes existing __arch_page_to_dma() and provide a default
implementation otherwise.  The default implementation for highmem is
based on __pfn_to_bus() which is defined only when no custom
__virt_to_bus() is provided by the machine class.

That leaves only ebsa110 and footbridge which cannot support highmem
until they provide their own __arch_page_to_dma() implementation.
But highmem support on those legacy platforms with limited memory is
certainly not a priority.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/common/dmabounce.c                 |  7 +++++++
 arch/arm/include/asm/dma-mapping.h          | 10 ++++++++++
 arch/arm/include/asm/memory.h               |  1 +
 arch/arm/mach-iop13xx/include/mach/memory.h |  5 ++++-
 arch/arm/mach-ks8695/include/mach/memory.h  |  6 +++++-
 arch/arm/plat-omap/include/mach/memory.h    |  8 +++++---
 6 files changed, 32 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index f030f0775be..734ac913599 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/page-flags.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
@@ -349,6 +350,12 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 	BUG_ON(!valid_dma_direction(dir));
 
+	if (PageHighMem(page)) {
+		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages "
+			     "is not supported\n");
+		return ~0;
+	}
+
 	return map_single(dev, page_address(page) + offset, size, dir);
 }
 EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 59fa762e9c6..ff46dfa68a9 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,10 +15,20 @@
  * must not be used by drivers.
  */
 #ifndef __arch_page_to_dma
+
+#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
 	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
 }
+#elif defined(__pfn_to_bus)
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+}
+#else
+#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
+#endif
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index ae472bc376d..85763db8744 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -188,6 +188,7 @@ static inline void *phys_to_virt(unsigned long x)
 #ifndef __virt_to_bus
 #define __virt_to_bus	__virt_to_phys
 #define __bus_to_virt	__phys_to_virt
+#define __pfn_to_bus(x)	((x) << PAGE_SHIFT)
 #endif
 
 static inline __deprecated unsigned long virt_to_bus(void *x)
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index e012bf13c95..42ae29b288a 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -59,7 +59,10 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 	})
 
 #define __arch_page_to_dma(dev, page)					\
-	__arch_virt_to_dma(dev, page_address(page))
+	({								\
+		/* __is_lbus_virt() can never be true for RAM pages */	\
+		(dma_addr_t)page_to_phys(page);				\
+	})
 
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 6d5887cf574..76e5308685a 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -35,7 +35,11 @@ extern struct bus_type platform_bus_type;
 					__phys_to_virt(x) : __bus_to_virt(x)); })
 #define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
 					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+#define __arch_page_to_dma(dev, x)	\
+	({ dma_addr_t __dma = page_to_phys(page); \
+	   if (!is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
+	   __dma; })
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index d6b5ca6c7da..99ed564d927 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -61,9 +61,11 @@
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
 #define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
 
-#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
-					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_phys(page_address(page));})
+#define __arch_page_to_dma(dev, page)	\
+	({ dma_addr_t __dma = page_to_phys(page); \
+	   if (is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+	   __dma; })
 
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
-- 
cgit v1.2.3


From 1bb772679ffb0ba1ff1d40d8c6b855ab029f177d Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Fri, 12 Sep 2008 16:11:51 -0400
Subject: [ARM] Feroceon: add highmem support to L2 cache handling code

The choice is between looping over the physical range and performing
single cache line operations, or to map highmem pages somewhere, as
cache range ops are possible only on virtual addresses.

Because L2 range ops are much faster, we go with the later by factoring
the physical-to-virtual address conversion and use a fixmap entry for it
in the HIGHMEM case.

Possible future optimizations to avoid the pte setup cost:

 - do the pte setup for highmem pages only

 - determine a threshold for doing a line-by-line processing on physical
   addresses when the range is small

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/include/asm/kmap_types.h |  1 +
 arch/arm/mm/cache-feroceon-l2.c   | 54 +++++++++++++++++++++++++++------------
 2 files changed, 38 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index 45def13ee17..d16ec97ec9a 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -18,6 +18,7 @@ enum km_type {
 	KM_IRQ1,
 	KM_SOFTIRQ0,
 	KM_SOFTIRQ1,
+	KM_L2_CACHE,
 	KM_TYPE_NR
 };
 
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 80cd207cbae..d6dd83826f8 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -14,8 +14,12 @@
 
 #include <linux/init.h>
 #include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 #include <plat/cache-feroceon-l2.h>
-
+#include "mm.h"
 
 /*
  * Low-level cache maintenance operations.
@@ -34,14 +38,36 @@
  * The range operations require two successive cp15 writes, in
  * between which we don't want to be preempted.
  */
+
+static inline unsigned long l2_start_va(unsigned long paddr)
+{
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * Let's do our own fixmap stuff in a minimal way here.
+	 * Because range ops can't be done on physical addresses,
+	 * we simply install a virtual mapping for it only for the
+	 * TLB lookup to occur, hence no need to flush the untouched
+	 * memory mapping.  This is protected with the disabling of
+	 * interrupts by the caller.
+	 */
+	unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+	unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
+	local_flush_tlb_kernel_page(vaddr);
+	return vaddr + (paddr & ~PAGE_MASK);
+#else
+	return __phys_to_virt(paddr);
+#endif
+}
+
 static inline void l2_clean_pa(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
 }
 
-static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
+	unsigned long va_start, va_end, flags;
 
 	/*
 	 * Make sure 'start' and 'end' reference the same page, as
@@ -51,17 +77,14 @@ static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
 	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
 	raw_local_irq_save(flags);
+	va_start = l2_start_va(start);
+	va_end = va_start + (end - start);
 	__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
 		"mcr p15, 1, %1, c15, c9, 5"
-		: : "r" (start), "r" (end));
+		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
 }
 
-static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
-{
-	l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
 static inline void l2_clean_inv_pa(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
@@ -72,9 +95,9 @@ static inline void l2_inv_pa(unsigned long addr)
 	__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
 }
 
-static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
+	unsigned long va_start, va_end, flags;
 
 	/*
 	 * Make sure 'start' and 'end' reference the same page, as
@@ -84,17 +107,14 @@ static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
 	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
 	raw_local_irq_save(flags);
+	va_start = l2_start_va(start);
+	va_end = va_start + (end - start);
 	__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
 		"mcr p15, 1, %1, c15, c11, 5"
-		: : "r" (start), "r" (end));
+		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
 }
 
-static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
-{
-	l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
 
 /*
  * Linux primitives.
-- 
cgit v1.2.3


From 3902a15e784e9b1efa8e6ad246489c609e0ef880 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 18 Sep 2008 22:55:47 -0400
Subject: [ARM] xsc3: add highmem support to L2 cache handling code

On xsc3, L2 cache ops are possible only on virtual addresses.  The code
is rearranged so to have a linear progression requiring the least amount
of pte setups in the highmem case.  To protect the virtual mapping so
created, interrupts must be disabled currently up to a page worth of
address range.

The interrupt disabling is done in a way to minimize the overhead within
the inner loop.  The alternative would consist in separate code for
the highmem and non highmem compilation which is less preferable.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mm/cache-xsc3l2.c | 107 +++++++++++++++++++++++++++++++++------------
 1 file changed, 80 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 464de893a98..5d180cb0bd9 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -17,12 +17,14 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
 #include <asm/system.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
 
 #define CR_L2	(1 << 26)
 
@@ -47,21 +49,11 @@ static inline void xsc3_l2_clean_mva(unsigned long addr)
 	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
 }
 
-static inline void xsc3_l2_clean_pa(unsigned long addr)
-{
-	xsc3_l2_clean_mva(__phys_to_virt(addr));
-}
-
 static inline void xsc3_l2_inv_mva(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
 }
 
-static inline void xsc3_l2_inv_pa(unsigned long addr)
-{
-	xsc3_l2_inv_mva(__phys_to_virt(addr));
-}
-
 static inline void xsc3_l2_inv_all(void)
 {
 	unsigned long l2ctype, set_way;
@@ -79,50 +71,103 @@ static inline void xsc3_l2_inv_all(void)
 	dsb();
 }
 
+#ifdef CONFIG_HIGHMEM
+#define l2_map_save_flags(x)		raw_local_save_flags(x)
+#define l2_map_restore_flags(x)		raw_local_irq_restore(x)
+#else
+#define l2_map_save_flags(x)		((x) = 0)
+#define l2_map_restore_flags(x)		((void)(x))
+#endif
+
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
+				      unsigned long flags)
+{
+#ifdef CONFIG_HIGHMEM
+	unsigned long va = prev_va & PAGE_MASK;
+	unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
+	if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
+		/*
+		 * Switching to a new page.  Because cache ops are
+		 * using virtual addresses only, we must put a mapping
+		 * in place for it.  We also enable interrupts for a
+		 * short while and disable them again to protect this
+		 * mapping.
+		 */
+		unsigned long idx;
+		raw_local_irq_restore(flags);
+		idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+		va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+		raw_local_irq_restore(flags | PSR_I_BIT);
+		set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
+		local_flush_tlb_kernel_page(va);
+	}
+	return va + (pa_offset >> (32 - PAGE_SHIFT));
+#else
+	return __phys_to_virt(pa);
+#endif
+}
+
 static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 {
+	unsigned long vaddr, flags;
+
 	if (start == 0 && end == -1ul) {
 		xsc3_l2_inv_all();
 		return;
 	}
 
+	vaddr = -1;  /* to force the first mapping */
+	l2_map_save_flags(flags);
+
 	/*
 	 * Clean and invalidate partial first cache line.
 	 */
 	if (start & (CACHE_LINE_SIZE - 1)) {
-		xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
-		xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
+		xsc3_l2_inv_mva(vaddr);
 		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
 	}
 
 	/*
-	 * Clean and invalidate partial last cache line.
+	 * Invalidate all full cache lines between 'start' and 'end'.
 	 */
-	if (start < end && (end & (CACHE_LINE_SIZE - 1))) {
-		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
-		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
-		end &= ~(CACHE_LINE_SIZE - 1);
+	while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_inv_mva(vaddr);
+		start += CACHE_LINE_SIZE;
 	}
 
 	/*
-	 * Invalidate all full cache lines between 'start' and 'end'.
+	 * Clean and invalidate partial last cache line.
 	 */
-	while (start < end) {
-		xsc3_l2_inv_pa(start);
-		start += CACHE_LINE_SIZE;
+	if (start < end) {
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
+		xsc3_l2_inv_mva(vaddr);
 	}
 
+	l2_map_restore_flags(flags);
+
 	dsb();
 }
 
 static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
 {
+	unsigned long vaddr, flags;
+
+	vaddr = -1;  /* to force the first mapping */
+	l2_map_save_flags(flags);
+
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		xsc3_l2_clean_pa(start);
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
 
+	l2_map_restore_flags(flags);
+
 	dsb();
 }
 
@@ -148,18 +193,26 @@ static inline void xsc3_l2_flush_all(void)
 
 static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
 {
+	unsigned long vaddr, flags;
+
 	if (start == 0 && end == -1ul) {
 		xsc3_l2_flush_all();
 		return;
 	}
 
+	vaddr = -1;  /* to force the first mapping */
+	l2_map_save_flags(flags);
+
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		xsc3_l2_clean_pa(start);
-		xsc3_l2_inv_pa(start);
+		vaddr = l2_map_va(start, vaddr, flags);
+		xsc3_l2_clean_mva(vaddr);
+		xsc3_l2_inv_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
 
+	l2_map_restore_flags(flags);
+
 	dsb();
 }
 
-- 
cgit v1.2.3


From 3f973e22160257c5bda85815be5b1540d391a671 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 4 Nov 2008 00:48:42 -0500
Subject: [ARM] ignore high memory with VIPT aliasing caches

VIPT aliasing caches have issues of their own which are not yet handled.
Usage of discard_old_kernel_data() in copypage-v6.c is not highmem ready,
kmap/fixmap stuff doesn't take account of cache colouring, etc.
If/when those issues are handled then this could be reverted.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mm/mmu.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4810a4c9ffc..cf504885a5f 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -18,6 +18,7 @@
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
 #include <asm/sections.h>
+#include <asm/cachetype.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
@@ -678,6 +679,10 @@ static void __init sanity_check_meminfo(void)
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
+			} else if (cache_is_vipt_aliasing()) {
+				printk(KERN_CRIT "HIGHMEM is not yet supported "
+						 "with VIPT aliasing cache, "
+						 "ignoring high memory\n");
 			} else {
 				memmove(bank + 1, bank,
 					(meminfo.nr_banks - i) * sizeof(*bank));
-- 
cgit v1.2.3


From 053a96ca11a9785a7e63fc89eed4514a6446ec58 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Fri, 19 Sep 2008 00:36:12 -0400
Subject: [ARM] add CONFIG_HIGHMEM option

Here it is... HIGHMEM for the ARM architecture.  :-)

If you don't have enough ram for highmem pages to be allocated and still
want to test this, then the cmdline option "vmalloc=" can be used with
a value large enough to force the highmem threshold down.

Successfully tested on a Marvell DB-78x00-BP Development Board with
2 GB of RAM.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/Kconfig | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87f993..2b28786b387 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -915,6 +915,23 @@ config NODES_SHIFT
 	default "2"
 	depends on NEED_MULTIPLE_NODES
 
+config HIGHMEM
+	bool "High Memory Support (EXPERIMENTAL)"
+	depends on MMU && EXPERIMENTAL
+	help
+	  The address space of ARM processors is only 4 Gigabytes large
+	  and it has to accommodate user address space, kernel address
+	  space as well as some memory mapped IO. That means that, if you
+	  have a large amount of physical memory and/or IO, not all of the
+	  memory can be "permanently mapped" by the kernel. The physical
+	  memory that is not permanently mapped is called "high memory".
+
+	  Depending on the selected kernel/user memory split, minimum
+	  vmalloc space and actual amount of RAM, you may not need this
+	  option which should result in a slightly faster kernel.
+
+	  If unsure, say n.
+
 source "mm/Kconfig"
 
 config LEDS
-- 
cgit v1.2.3


From 4640fa606bf996d275a6e208e3654e9e943afe60 Mon Sep 17 00:00:00 2001
From: Shadi Ammouri <shadi@marvell.com>
Date: Tue, 24 Feb 2009 15:26:23 -0500
Subject: [ARM] Kirkwood: Marvell SheevaPlug support

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/Kconfig            |  6 ++
 arch/arm/mach-kirkwood/Makefile           |  1 +
 arch/arm/mach-kirkwood/sheevaplug-setup.c | 98 +++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 arch/arm/mach-kirkwood/sheevaplug-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3600cd9f051..532443622a1 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
+config MACH_SHEEVAPLUG
+	bool "Marvell SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell SheevaPlug Reference Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index fdff35cc8d5..de81b4b5bd3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,3 +3,4 @@ obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
new file mode 100644
index 00000000000..d48989dfe4d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct resource sheevaplug_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
+	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
+			  KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data sheevaplug_nand_data = {
+	.parts		= sheevaplug_nand_parts,
+	.nr_parts	= ARRAY_SIZE(sheevaplug_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+	.chip_delay	= 25,
+};
+
+static struct platform_device sheevaplug_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sheevaplug_nand_data,
+	},
+	.resource	= &sheevaplug_nand_resource,
+	.num_resources	= 1,
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+	// unfortunately the CD signal has not been connected */
+};
+
+static void __init sheevaplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	kirkwood_uart0_init();
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&sheevaplug_ge00_data);
+	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	platform_device_register(&sheevaplug_nand_flash);
+}
+
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 3ec0d47427be9ff5b82ba5c5e853c691a942ed65 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 2 Mar 2009 23:44:41 -0500
Subject: [ARM] Kirkwood: SheevaPlug USB Power Enable setup

Ideally, the default should be set to 0 and let the EHCI driver turn
it on as needed.  This makes USB usable in the mean time.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/sheevaplug-setup.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index d48989dfe4d..c1cb9f4d346 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -14,12 +14,14 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
 #include "common.h"
+#include "mpp.h"
 
 static struct mtd_partition sheevaplug_nand_parts[] = {
 	{
@@ -71,15 +73,26 @@ static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
 	// unfortunately the CD signal has not been connected */
 };
 
+static unsigned int sheevaplug_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	0
+};
+
 static void __init sheevaplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
+	kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
 	kirkwood_ehci_init();
+
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
 	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
-- 
cgit v1.2.3


From e96c33d9eddcea86ffd39a592eaca8bb21792002 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 3 Mar 2009 01:16:07 -0500
Subject: [ARM] Kirkwood: SheevaPlug LED support

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/sheevaplug-setup.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c1cb9f4d346..831e4a56cae 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -73,8 +74,31 @@ static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
 	// unfortunately the CD signal has not been connected */
 };
 
+static struct gpio_led sheevaplug_led_pins[] = {
+	{
+		.name			= "plug:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data sheevaplug_led_data = {
+	.leds		= sheevaplug_led_pins,
+	.num_leds	= ARRAY_SIZE(sheevaplug_led_pins),
+};
+
+static struct platform_device sheevaplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &sheevaplug_led_data,
+	}
+};
+
 static unsigned int sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
+	MPP49_GPIO,	/* LED */
 	0
 };
 
@@ -97,6 +121,7 @@ static void __init sheevaplug_init(void)
 	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
 	platform_device_register(&sheevaplug_nand_flash);
+	platform_device_register(&sheevaplug_leds);
 }
 
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
-- 
cgit v1.2.3


From 698fe13b215ec6b956e867dcbc4a4c0992a61ca2 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 3 Mar 2009 22:19:03 -0500
Subject: [ARM] Kirkwood: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/kirkwood_defconfig | 225 ++++++++++++++++++++++++++----------
 1 file changed, 163 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 4bc38078d58..9ed4e1b8667 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Thu Dec  4 15:27:39 2008
+# Linux kernel version: 2.6.29-rc5
+# Tue Mar  3 21:45:57 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
@@ -42,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
+CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
@@ -53,6 +62,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -83,6 +93,7 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -93,7 +104,6 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,11 +111,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,7 +129,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -132,7 +139,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -159,11 +165,13 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -171,14 +179,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -214,6 +215,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -242,7 +244,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
@@ -291,6 +292,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -355,6 +357,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,12 +371,27 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_NL80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -398,6 +416,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -451,9 +470,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
@@ -481,6 +498,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
@@ -490,6 +508,12 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -568,6 +592,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -682,6 +708,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -695,6 +724,7 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -710,7 +740,6 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -720,6 +749,7 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -754,8 +784,39 @@ CONFIG_MV643XX_ETH=y
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -839,11 +900,11 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -879,6 +940,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -905,8 +967,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -925,12 +985,12 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -952,10 +1012,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1012,11 +1074,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1024,12 +1084,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1058,6 +1121,7 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1087,7 +1151,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1135,21 +1198,51 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
+CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1227,6 +1320,7 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1238,16 +1332,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1268,9 +1360,9 @@ CONFIG_UDF_NLS=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1286,10 +1378,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1309,6 +1398,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1393,7 +1483,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1416,6 +1506,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1424,7 +1515,7 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1435,7 +1526,10 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -1446,11 +1540,14 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1464,19 +1561,22 @@ CONFIG_DEBUG_LL=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1496,7 +1596,7 @@ CONFIG_CRYPTO_MANAGER=m
 CONFIG_CRYPTO_CBC=m
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_ECB=y
 # CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
@@ -1510,7 +1610,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1527,9 +1627,9 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
@@ -1560,6 +1660,7 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
-- 
cgit v1.2.3


From 569106c70e49ad67c69fa7d43a2a5218e63a4619 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Thu, 12 Mar 2009 09:48:37 +0100
Subject: [ARM] mv78xx0: Add Marvell RD-78x00-mASA Reference Design support

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Stanislav Samsonov <samsonov@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/mv78xx0_defconfig         |  1 +
 arch/arm/mach-mv78xx0/Kconfig              |  6 ++
 arch/arm/mach-mv78xx0/Makefile             |  1 +
 arch/arm/mach-mv78xx0/rd78x00-masa-setup.c | 88 ++++++++++++++++++++++++++++++
 4 files changed, 96 insertions(+)
 create mode 100644 arch/arm/mach-mv78xx0/rd78x00-masa-setup.c

(limited to 'arch')

diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 83c817f31bc..b0698722e0c 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -165,6 +165,7 @@ CONFIG_ARCH_MV78XX0=y
 # Marvell MV78xx0 Implementations
 #
 CONFIG_MACH_DB78X00_BP=y
+CONFIG_MACH_RD78X00_MASA=y
 
 #
 # Boot options
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index d83cb86837d..6fbe68fe441 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -8,6 +8,12 @@ config MACH_DB78X00_BP
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-78x00-BP Development Board.
 
+config MACH_RD78X00_MASA
+	bool "Marvell RD-78x00-mASA Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-78x00-mASA Reference Design.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index ec16c05c3b1..da628b7f3bb 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,2 +1,3 @@
 obj-y				+= common.o addr-map.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
new file mode 100644
index 00000000000..e136b7a0335
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
+ *
+ * Marvell RD-78x00-mASA Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
+};
+
+static struct mv_sata_platform_data rd78x00_masa_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init rd78x00_masa_init(void)
+{
+	/*
+	 * Basic MV78x00 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		mv78xx0_ehci0_init();
+		mv78xx0_ehci1_init();
+		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
+		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
+		mv78xx0_sata_init(&rd78x00_masa_sata_data);
+		mv78xx0_uart0_init();
+		mv78xx0_uart2_init();
+	} else {
+		mv78xx0_ehci2_init();
+		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
+		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
+		mv78xx0_uart1_init();
+		mv78xx0_uart3_init();
+	}
+}
+
+static int __init rd78x00_pci_init(void)
+{
+	/*
+	 * Assign all PCIe devices to CPU core #0.
+	 */
+	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
+		mv78xx0_pcie_init(1, 1);
+
+	return 0;
+}
+subsys_initcall(rd78x00_pci_init);
+
+MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= rd78x00_masa_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END
-- 
cgit v1.2.3


From a6bc3262c561780d2a6587aa3d5715b1e7d8fa13 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 16 Mar 2009 18:52:56 +1100
Subject: sparseirq, powerpc/cell: fix unused variable warning in interrupt.c

This new compiler warning:

   arch/powerpc/platforms/cell/interrupt.c: In function 'handle_iic_irq':
   arch/powerpc/platforms/cell/interrupt.c:240: warning: unused variable 'cpu'

Triggers because the local variable 'cpu' became unused due to commit:

   dee4102: sparseirq: use kstat_irqs_cpu instead

Remove the variable.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: ppc-dev <linuxppc-dev@ozlabs.org>
LKML-Reference: <20090316185256.4a160374.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/platforms/cell/interrupt.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 1f0d774ad92..882e47080e7 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -237,8 +237,6 @@ extern int noirqdebug;
 
 static void handle_iic_irq(unsigned int irq, struct irq_desc *desc)
 {
-	const unsigned int cpu = smp_processor_id();
-
 	spin_lock(&desc->lock);
 
 	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
-- 
cgit v1.2.3


From 4c3f450ba4e4c00df91f98664b58f9a98dc049fd Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 12 Mar 2009 08:40:15 +0000
Subject: sh: Add OHCI USB support for SH7786

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 83 ++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 249b99e1adb..5a47e1cf442 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -18,6 +18,7 @@
 #include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/dma-mapping.h>
 #include <asm/mmzone.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -68,12 +69,94 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe704ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 77,
+		.end	= 77,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 usb_ohci_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device usb_ohci_device = {
+	.name		= "sh_ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ohci_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
 static struct platform_device *sh7786_devices[] __initdata = {
 	&sci_device,
+	&usb_ohci_device,
 };
 
+
+/*
+ * Please call this function if your platform board
+ * use external clock for USB
+ * */
+#define USBCTL0		0xffe70858
+#define CLOCK_MODE_MASK 0xffffff7f
+#define EXT_CLOCK_MODE  0x00000080
+void __init sh7786_usb_use_exclock(void)
+{
+	u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
+	__raw_writel(val | EXT_CLOCK_MODE, USBCTL0);
+}
+
+#define USBINITREG1	0xffe70094
+#define USBINITREG2	0xffe7009c
+#define USBINITVAL1	0x00ff0040
+#define USBINITVAL2	0x00000001
+
+#define USBPCTL1	0xffe70804
+#define USBST		0xffe70808
+#define PHY_ENB		0x00000001
+#define PLL_ENB		0x00000002
+#define PHY_RST		0x00000004
+#define ACT_PLL_STATUS	0xc0000000
+static void __init sh7786_usb_setup(void)
+{
+	int i = 1000000;
+
+	/*
+	 * USB initial settings
+	 *
+	 * The following settings are necessary
+	 * for using the USB modules.
+	 *
+	 * see "USB Inital Settings" for detail
+	 */
+	__raw_writel(USBINITVAL1, USBINITREG1);
+	__raw_writel(USBINITVAL2, USBINITREG2);
+
+	/*
+	 * Set the PHY and PLL enable bit
+	 */
+	__raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
+	while (i-- &&
+	       ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS))
+		cpu_relax();
+
+	if (i) {
+		/* Set the PHY RST bit */
+		__raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+		printk(KERN_INFO "sh7786 usb setup done\n");
+	}
+}
+
 static int __init sh7786_devices_setup(void)
 {
+	sh7786_usb_setup();
 	return platform_add_devices(sh7786_devices,
 				    ARRAY_SIZE(sh7786_devices));
 }
-- 
cgit v1.2.3


From 039a718ebb37298de87801288673859ac40b6fc4 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Thu, 12 Mar 2009 06:34:39 +0000
Subject: sh: Revert CONFIG_NR_ONCHIP_DMA_CHANNELS to MAX_DMA_CHANNELS

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dma-sh.h | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index e873ecaa506..0c8f8e14622 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -11,6 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
+#include <asm/dma.h>
 #include <cpu/dma.h>
 
 /* DMAOR contorl: The DMAOR access size is different by CPU.*/
@@ -29,21 +30,21 @@
 #endif
 
 static int dmte_irq_map[] __maybe_unused = {
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 4)
+#if (MAX_DMA_CHANNELS >= 4)
     DMTE0_IRQ,
     DMTE0_IRQ + 1,
     DMTE0_IRQ + 2,
     DMTE0_IRQ + 3,
 #endif
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 6)
+#if (MAX_DMA_CHANNELS >= 6)
     DMTE4_IRQ,
     DMTE4_IRQ + 1,
 #endif
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 8)
+#if (MAX_DMA_CHANNELS >= 8)
     DMTE6_IRQ,
     DMTE6_IRQ + 1,
 #endif
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 12)
+#if (MAX_DMA_CHANNELS >= 12)
     DMTE8_IRQ,
     DMTE9_IRQ,
     DMTE10_IRQ,
@@ -85,21 +86,21 @@ static int dmte_irq_map[] __maybe_unused = {
 
 /* DMA base address */
 static u32 dma_base_addr[] __maybe_unused = {
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 4)
+#if (MAX_DMA_CHANNELS >= 4)
 	SH_DMAC_BASE0 + 0x00,	/* channel 0 */
 	SH_DMAC_BASE0 + 0x10,
 	SH_DMAC_BASE0 + 0x20,
 	SH_DMAC_BASE0 + 0x30,
 #endif
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 6)
+#if (MAX_DMA_CHANNELS >= 6)
 	SH_DMAC_BASE0 + 0x50,
 	SH_DMAC_BASE0 + 0x60,
 #endif
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 8)
+#if (MAX_DMA_CHANNELS >= 8)
 	SH_DMAC_BASE1 + 0x00,
 	SH_DMAC_BASE1 + 0x10,
 #endif
-#if (CONFIG_NR_ONCHIP_DMA_CHANNELS >= 12)
+#if (MAX_DMA_CHANNELS >= 12)
 	SH_DMAC_BASE1 + 0x20,
 	SH_DMAC_BASE1 + 0x30,
 	SH_DMAC_BASE1 + 0x50,
-- 
cgit v1.2.3


From a83c0b739f3ad1887704cfa9f1ee5ee208cf1532 Mon Sep 17 00:00:00 2001
From: Francesco VIRLINZI <francesco.virlinzi@st.com>
Date: Wed, 11 Mar 2009 10:39:02 +0000
Subject: sh: PMB hibernation support

This implements preliminary suspend/resume support for the PMB.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pmb.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 84241676265..b1a714a92b1 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -15,6 +15,8 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/cpu.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/bitops.h>
@@ -402,3 +404,39 @@ static int __init pmb_debugfs_init(void)
 	return 0;
 }
 postcore_initcall(pmb_debugfs_init);
+
+#ifdef CONFIG_PM
+static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state)
+{
+	static pm_message_t prev_state;
+
+	/* Restore the PMB after a resume from hibernation */
+	if (state.event == PM_EVENT_ON &&
+	    prev_state.event == PM_EVENT_FREEZE) {
+		struct pmb_entry *pmbe;
+		spin_lock_irq(&pmb_list_lock);
+		for (pmbe = pmb_list; pmbe; pmbe = pmbe->next)
+			set_pmb_entry(pmbe);
+		spin_unlock_irq(&pmb_list_lock);
+	}
+	prev_state = state;
+	return 0;
+}
+
+static int pmb_sysdev_resume(struct sys_device *dev)
+{
+	return pmb_sysdev_suspend(dev, PMSG_ON);
+}
+
+static struct sysdev_driver pmb_sysdev_driver = {
+	.suspend = pmb_sysdev_suspend,
+	.resume = pmb_sysdev_resume,
+};
+
+static int __init pmb_sysdev_init(void)
+{
+	return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver);
+}
+
+subsys_initcall(pmb_sysdev_init);
+#endif
-- 
cgit v1.2.3


From 02ebd32f52c10f90f810e85d0281e9e81dd6e741 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 13 Mar 2009 04:31:34 +0000
Subject: sh: Disable get_dma_error_irq for non-SH4 targets.

dma-sh's get_dma_error_irq() is only used by SH4, as the SH3
doesn't have the DMA Error interrupt.

Disable it out for non-SH4 builds.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/dma-sh.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index ab7b18dcbab..31c2930f2f5 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -280,6 +280,7 @@ static struct dma_info sh_dmac_info = {
 	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
 };
 
+#ifdef CONFIG_CPU_SH4
 static unsigned int get_dma_error_irq(int n)
 {
 #if defined(DMAC_IRQ_MULTI)
@@ -293,6 +294,7 @@ static unsigned int get_dma_error_irq(int n)
 #endif
 #endif
 }
+#endif
 
 static int __init sh_dmac_init(void)
 {
-- 
cgit v1.2.3


From 7a516280b6a99634933b417834e178bde8659da1 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 13 Mar 2009 05:03:37 +0000
Subject: sh: Fix compile error by operands(mov.l) in sh3/entry.S

-- log --
arch/sh/kernel/cpu/sh4/../sh3/entry.S:365: Error: invalid operands for opcode
make[4]: *** [arch/sh/kernel/cpu/sh4/../sh3/entry.o] Error 1
make[3]: *** [arch/sh/kernel/cpu/sh4] Error 2
-- log --

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index fba6ac20bb1..55da0ff9848 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -362,7 +362,7 @@ general_exception:
 	 nop
 
 	! Save registers / Switch to bank 0
-	mov.l	k4, k2		! keep vector in k2
+	mov		k4, k2		! keep vector in k2
 	mov.l	1f, k4		! SR bits to clear in k4
 	bsr	save_regs	! needs original pr value in k3
 	 nop
-- 
cgit v1.2.3


From 7759491274bc5ba7cd72b3b9cc5ec8247b937efb Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 13 Mar 2009 15:23:04 +0000
Subject: sh: SuperH Mobile suspend support

This patch contains CONFIG_SUSPEND support to the SuperH
architecture. If enabled, SuperH Mobile processors will
register their suspend callbacks during boot.

To suspend, use "echo mem > /sys/power/state". To allow
wakeup, make sure "/sys/device/platform/../power/wakeup"
contains "enabled". Additional per-device driver patches
are most likely needed.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                           |   1 +
 arch/sh/include/asm/suspend.h             |   9 +++
 arch/sh/kernel/cpu/sh4a/Makefile          |   4 +
 arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c    |  92 ++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S | 125 ++++++++++++++++++++++++++++++
 5 files changed, 231 insertions(+)
 create mode 100644 arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
 create mode 100644 arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index adffbf4048b..a0c879d17fd 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -181,6 +181,7 @@ config CPU_SHX3
 
 config ARCH_SHMOBILE
 	bool
+	select ARCH_SUSPEND_POSSIBLE
 
 choice
 	prompt "Processor sub-type selection"
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index 5d6d8aba568..b1b995370e7 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_SH_SUSPEND_H
 #define _ASM_SH_SUSPEND_H
 
+#ifndef __ASSEMBLY__
 static inline int arch_prepare_suspend(void) { return 0; }
 
 #include <asm/ptrace.h>
@@ -9,5 +10,13 @@ struct swsusp_arch_regs {
 	struct pt_regs user_regs;
 	unsigned long bank1_regs[8];
 };
+#endif
+
+/* flags passed to assembly suspend code */
+#define SUSP_SH_SLEEP		(1 << 0) /* Regular sleep mode */
+#define SUSP_SH_STANDBY		(1 << 1) /* SH-Mobile Software standby mode */
+#define SUSP_SH_RSTANDBY	(1 << 2) /* SH-Mobile R-standby mode */
+#define SUSP_SH_USTANDBY	(1 << 3) /* SH-Mobile U-standby mode */
+#define SUSP_SH_SF		(1 << 4) /* Enable self-refresh */
 
 #endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 1a92361feeb..09967dc0065 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -35,6 +35,10 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
+# Power Mangement & Sleep mode
+pm-$(CONFIG_ARCH_SHMOBILE)		:= pm-sh_mobile.o sleep-sh_mobile.o
+
 obj-y			+= $(clock-y)
 obj-$(CONFIG_SMP)	+= $(smp-y)
 obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
+obj-$(CONFIG_PM)	+= $(pm-y)
diff --git a/arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c b/arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
new file mode 100644
index 00000000000..8c067adf683
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
@@ -0,0 +1,92 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+ *
+ * Power management support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/uaccess.h>
+
+/*
+ * Sleep modes available on SuperH Mobile:
+ *
+ * Sleep mode is just plain "sleep" instruction
+ * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
+ * Standby Self-Refresh mode is above plus stopped clocks
+ */
+#define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
+#define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
+#define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
+
+/*
+ * The following modes are not there yet:
+ *
+ * R-standby mode is unsupported, but will be added in the future
+ * U-standby mode is low priority since it needs bootloader hacks
+ *
+ * All modes should be tied in with cpuidle. But before that can
+ * happen we need to keep track of enabled hardware blocks so we
+ * can avoid entering sleep modes that stop clocks to hardware
+ * blocks that are in use even though the cpu core is idle.
+ */
+
+extern const unsigned char sh_mobile_standby[];
+extern const unsigned int sh_mobile_standby_size;
+
+static void sh_mobile_call_standby(unsigned long mode)
+{
+	extern void *vbr_base;
+	void *onchip_mem = (void *)0xe5200000; /* ILRAM */
+	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
+
+	/* Note: Wake up from sleep may generate exceptions!
+	 * Setup VBR to point to on-chip ram if self-refresh is
+	 * going to be used.
+	 */
+	if (mode & SUSP_SH_SF)
+		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
+
+	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
+	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
+	wmb();
+	ctrl_barrier();
+
+	/* Let assembly snippet in on-chip memory handle the rest */
+	standby_onchip_mem(mode);
+
+	/* Put VBR back in System RAM again */
+	if (mode & SUSP_SH_SF)
+		asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+}
+
+static int sh_pm_enter(suspend_state_t state)
+{
+	local_irq_disable();
+	set_bl_bit();
+	sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
+	local_irq_disable();
+	clear_bl_bit();
+	return 0;
+}
+
+static struct platform_suspend_ops sh_pm_ops = {
+	.enter          = sh_pm_enter,
+	.valid          = suspend_valid_only_mem,
+};
+
+static int __init sh_pm_init(void)
+{
+	suspend_set_ops(&sh_pm_ops);
+	return 0;
+}
+
+late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S b/arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
new file mode 100644
index 00000000000..5d888ef53d8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
@@ -0,0 +1,125 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+ *
+ * Sleep mode and Standby modes support for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+
+/* manage self-refresh and enter standby mode.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+
+	.balign 	4096,0,4096
+ENTRY(sh_mobile_standby)
+	mov	r4, r0
+
+	tst	#SUSP_SH_SF, r0
+	bt	skip_set_sf
+
+	/* SDRAM: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+skip_set_sf:
+	tst	#SUSP_SH_SLEEP, r0
+	bt	test_standby
+
+	/* set mode to "sleep mode" */
+	bra	do_sleep
+	 mov	#0x00, r1
+
+test_standby:
+	tst	#SUSP_SH_STANDBY, r0
+	bt	test_rstandby
+
+	/* set mode to "software standby mode" */
+	bra	do_sleep
+	 mov	#0x80, r1
+
+test_rstandby:
+	tst	#SUSP_SH_RSTANDBY, r0
+	bt	test_ustandby
+
+	/* set mode to "r-standby mode" */
+	bra	do_sleep
+	 mov	#0x20, r1
+
+test_ustandby:
+	tst	#SUSP_SH_USTANDBY, r0
+	bt	done_sleep
+
+	/* set mode to "u-standby mode" */
+	mov	#0x10, r1
+
+	/* fall-through */
+
+do_sleep:
+	/* setup and enter selected standby mode */
+	mov.l	5f, r4
+	mov.l	r1, @r4
+	sleep
+
+done_sleep:
+	/* reset standby mode to sleep mode */
+	mov.l	5f, r4
+	mov	#0x00, r1
+	mov.l	r1, @r4
+
+	tst	#SUSP_SH_SF, r0
+	bt	skip_restore_sf
+
+	/* SDRAM: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r2
+	mov.l   4f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+	mov.l	6f, r4
+	mov.l	7f, r1
+	mov.l	8f, r2
+	mov.l	@r4, r3
+	mov	#-1, r4
+	add	r4, r3
+	or	r2, r3
+	mov.l	r3, @r1
+skip_restore_sf:
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+4:	.long	0xfffffbff
+5:	.long	0xa4150020 /* STBCR */
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+
+/* interrupt vector @ 0x600 */
+	.balign 	0x400,0,0x400
+	.long	0xdeadbeef
+	.balign 	0x200,0,0x200
+	/* sh7722 will end up here in sleep mode */
+	rte
+	 nop
+sh_mobile_standby_end:
+
+ENTRY(sh_mobile_standby_size)
+	.long sh_mobile_standby_end - sh_mobile_standby
-- 
cgit v1.2.3


From 93356d07474b1f16f25e79e81597c2a6b8c2a783 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 13 Mar 2009 15:27:14 +0000
Subject: sh: add ap325 lcd power off support

Improve the ap325 board code to allow the lcd panel
and backlight to be powered off.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 15b6d450fbf..a64e38841c4 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -166,6 +166,16 @@ static void ap320_wvga_power_on(void *board_data)
 	ctrl_outw(0x100, FPGA_BKLREG);
 }
 
+static void ap320_wvga_power_off(void *board_data)
+{
+	/* backlight */
+	ctrl_outw(0, FPGA_BKLREG);
+	gpio_set_value(GPIO_PTS3, 1);
+
+	/* ASD AP-320/325 LCD OFF */
+	ctrl_outw(0, FPGA_LCDREG);
+}
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
@@ -191,6 +201,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		},
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
+			.display_off = ap320_wvga_power_off,
 		},
 	}
 };
-- 
cgit v1.2.3


From e9edb3fec2260b5a64e9ca9e09160b74f1b106e3 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 16 Mar 2009 20:00:17 +0900
Subject: sh: Consolidate SH-Mobile CPU code in arch/sh/kernel/cpu/shmobile/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/Makefile               |   1 +
 arch/sh/kernel/cpu/sh4a/Makefile          |   4 -
 arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c    |  92 ----------------------
 arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S | 125 ------------------------------
 arch/sh/kernel/cpu/shmobile/Makefile      |   6 ++
 arch/sh/kernel/cpu/shmobile/pm.c          |  92 ++++++++++++++++++++++
 arch/sh/kernel/cpu/shmobile/sleep.S       | 125 ++++++++++++++++++++++++++++++
 7 files changed, 224 insertions(+), 221 deletions(-)
 delete mode 100644 arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
 delete mode 100644 arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
 create mode 100644 arch/sh/kernel/cpu/shmobile/Makefile
 create mode 100644 arch/sh/kernel/cpu/shmobile/pm.c
 create mode 100644 arch/sh/kernel/cpu/shmobile/sleep.S

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index f471d242774..2600641a483 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CPU_SH5)		= sh5/
 # Special cases for family ancestry.
 
 obj-$(CONFIG_CPU_SH4A)		+= sh4a/
+obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/
 
 # Common interfaces.
 
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 09967dc0065..1a92361feeb 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -35,10 +35,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
-# Power Mangement & Sleep mode
-pm-$(CONFIG_ARCH_SHMOBILE)		:= pm-sh_mobile.o sleep-sh_mobile.o
-
 obj-y			+= $(clock-y)
 obj-$(CONFIG_SMP)	+= $(smp-y)
 obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
-obj-$(CONFIG_PM)	+= $(pm-y)
diff --git a/arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c b/arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
deleted file mode 100644
index 8c067adf683..00000000000
--- a/arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
- *
- * Power management support code for SuperH Mobile
- *
- *  Copyright (C) 2009 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-#include <asm/suspend.h>
-#include <asm/uaccess.h>
-
-/*
- * Sleep modes available on SuperH Mobile:
- *
- * Sleep mode is just plain "sleep" instruction
- * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
- * Standby Self-Refresh mode is above plus stopped clocks
- */
-#define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
-#define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
-#define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
-
-/*
- * The following modes are not there yet:
- *
- * R-standby mode is unsupported, but will be added in the future
- * U-standby mode is low priority since it needs bootloader hacks
- *
- * All modes should be tied in with cpuidle. But before that can
- * happen we need to keep track of enabled hardware blocks so we
- * can avoid entering sleep modes that stop clocks to hardware
- * blocks that are in use even though the cpu core is idle.
- */
-
-extern const unsigned char sh_mobile_standby[];
-extern const unsigned int sh_mobile_standby_size;
-
-static void sh_mobile_call_standby(unsigned long mode)
-{
-	extern void *vbr_base;
-	void *onchip_mem = (void *)0xe5200000; /* ILRAM */
-	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
-
-	/* Note: Wake up from sleep may generate exceptions!
-	 * Setup VBR to point to on-chip ram if self-refresh is
-	 * going to be used.
-	 */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
-
-	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
-	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
-	wmb();
-	ctrl_barrier();
-
-	/* Let assembly snippet in on-chip memory handle the rest */
-	standby_onchip_mem(mode);
-
-	/* Put VBR back in System RAM again */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
-}
-
-static int sh_pm_enter(suspend_state_t state)
-{
-	local_irq_disable();
-	set_bl_bit();
-	sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
-	local_irq_disable();
-	clear_bl_bit();
-	return 0;
-}
-
-static struct platform_suspend_ops sh_pm_ops = {
-	.enter          = sh_pm_enter,
-	.valid          = suspend_valid_only_mem,
-};
-
-static int __init sh_pm_init(void)
-{
-	suspend_set_ops(&sh_pm_ops);
-	return 0;
-}
-
-late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S b/arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
deleted file mode 100644
index 5d888ef53d8..00000000000
--- a/arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
- *
- * Sleep mode and Standby modes support for SuperH Mobile
- *
- *  Copyright (C) 2009 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/suspend.h>
-
-/* manage self-refresh and enter standby mode.
- * this code will be copied to on-chip memory and executed from there.
- */
-
-	.balign 	4096,0,4096
-ENTRY(sh_mobile_standby)
-	mov	r4, r0
-
-	tst	#SUSP_SH_SF, r0
-	bt	skip_set_sf
-
-	/* SDRAM: disable power down and put in self-refresh mode */
-	mov.l	1f, r4
-	mov.l	2f, r1
-	mov.l	@r4, r2
-	or	r1, r2
-	mov.l   3f, r3
-	and	r3, r2
-	mov.l	r2, @r4
-
-skip_set_sf:
-	tst	#SUSP_SH_SLEEP, r0
-	bt	test_standby
-
-	/* set mode to "sleep mode" */
-	bra	do_sleep
-	 mov	#0x00, r1
-
-test_standby:
-	tst	#SUSP_SH_STANDBY, r0
-	bt	test_rstandby
-
-	/* set mode to "software standby mode" */
-	bra	do_sleep
-	 mov	#0x80, r1
-
-test_rstandby:
-	tst	#SUSP_SH_RSTANDBY, r0
-	bt	test_ustandby
-
-	/* set mode to "r-standby mode" */
-	bra	do_sleep
-	 mov	#0x20, r1
-
-test_ustandby:
-	tst	#SUSP_SH_USTANDBY, r0
-	bt	done_sleep
-
-	/* set mode to "u-standby mode" */
-	mov	#0x10, r1
-
-	/* fall-through */
-
-do_sleep:
-	/* setup and enter selected standby mode */
-	mov.l	5f, r4
-	mov.l	r1, @r4
-	sleep
-
-done_sleep:
-	/* reset standby mode to sleep mode */
-	mov.l	5f, r4
-	mov	#0x00, r1
-	mov.l	r1, @r4
-
-	tst	#SUSP_SH_SF, r0
-	bt	skip_restore_sf
-
-	/* SDRAM: set auto-refresh mode */
-	mov.l	1f, r4
-	mov.l	@r4, r2
-	mov.l   4f, r3
-	and	r3, r2
-	mov.l	r2, @r4
-	mov.l	6f, r4
-	mov.l	7f, r1
-	mov.l	8f, r2
-	mov.l	@r4, r3
-	mov	#-1, r4
-	add	r4, r3
-	or	r2, r3
-	mov.l	r3, @r1
-skip_restore_sf:
-	rts
-	 nop
-
-	.balign 4
-1:	.long	0xfe400008 /* SDCR0 */
-2:	.long	0x00000400
-3:	.long	0xffff7fff
-4:	.long	0xfffffbff
-5:	.long	0xa4150020 /* STBCR */
-6:	.long   0xfe40001c /* RTCOR */
-7:	.long   0xfe400018 /* RTCNT */
-8:	.long   0xa55a0000
-
-/* interrupt vector @ 0x600 */
-	.balign 	0x400,0,0x400
-	.long	0xdeadbeef
-	.balign 	0x200,0,0x200
-	/* sh7722 will end up here in sleep mode */
-	rte
-	 nop
-sh_mobile_standby_end:
-
-ENTRY(sh_mobile_standby_size)
-	.long sh_mobile_standby_end - sh_mobile_standby
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
new file mode 100644
index 00000000000..08bfa7c7db2
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux/SuperH SH-Mobile backends.
+#
+
+# Power Management & Sleep mode
+obj-$(CONFIG_PM)	+= pm.o sleep.o
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
new file mode 100644
index 00000000000..8c067adf683
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -0,0 +1,92 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+ *
+ * Power management support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/uaccess.h>
+
+/*
+ * Sleep modes available on SuperH Mobile:
+ *
+ * Sleep mode is just plain "sleep" instruction
+ * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
+ * Standby Self-Refresh mode is above plus stopped clocks
+ */
+#define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
+#define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
+#define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
+
+/*
+ * The following modes are not there yet:
+ *
+ * R-standby mode is unsupported, but will be added in the future
+ * U-standby mode is low priority since it needs bootloader hacks
+ *
+ * All modes should be tied in with cpuidle. But before that can
+ * happen we need to keep track of enabled hardware blocks so we
+ * can avoid entering sleep modes that stop clocks to hardware
+ * blocks that are in use even though the cpu core is idle.
+ */
+
+extern const unsigned char sh_mobile_standby[];
+extern const unsigned int sh_mobile_standby_size;
+
+static void sh_mobile_call_standby(unsigned long mode)
+{
+	extern void *vbr_base;
+	void *onchip_mem = (void *)0xe5200000; /* ILRAM */
+	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
+
+	/* Note: Wake up from sleep may generate exceptions!
+	 * Setup VBR to point to on-chip ram if self-refresh is
+	 * going to be used.
+	 */
+	if (mode & SUSP_SH_SF)
+		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
+
+	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
+	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
+	wmb();
+	ctrl_barrier();
+
+	/* Let assembly snippet in on-chip memory handle the rest */
+	standby_onchip_mem(mode);
+
+	/* Put VBR back in System RAM again */
+	if (mode & SUSP_SH_SF)
+		asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+}
+
+static int sh_pm_enter(suspend_state_t state)
+{
+	local_irq_disable();
+	set_bl_bit();
+	sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
+	local_irq_disable();
+	clear_bl_bit();
+	return 0;
+}
+
+static struct platform_suspend_ops sh_pm_ops = {
+	.enter          = sh_pm_enter,
+	.valid          = suspend_valid_only_mem,
+};
+
+static int __init sh_pm_init(void)
+{
+	suspend_set_ops(&sh_pm_ops);
+	return 0;
+}
+
+late_initcall(sh_pm_init);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
new file mode 100644
index 00000000000..5d888ef53d8
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -0,0 +1,125 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+ *
+ * Sleep mode and Standby modes support for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+
+/* manage self-refresh and enter standby mode.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+
+	.balign 	4096,0,4096
+ENTRY(sh_mobile_standby)
+	mov	r4, r0
+
+	tst	#SUSP_SH_SF, r0
+	bt	skip_set_sf
+
+	/* SDRAM: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+skip_set_sf:
+	tst	#SUSP_SH_SLEEP, r0
+	bt	test_standby
+
+	/* set mode to "sleep mode" */
+	bra	do_sleep
+	 mov	#0x00, r1
+
+test_standby:
+	tst	#SUSP_SH_STANDBY, r0
+	bt	test_rstandby
+
+	/* set mode to "software standby mode" */
+	bra	do_sleep
+	 mov	#0x80, r1
+
+test_rstandby:
+	tst	#SUSP_SH_RSTANDBY, r0
+	bt	test_ustandby
+
+	/* set mode to "r-standby mode" */
+	bra	do_sleep
+	 mov	#0x20, r1
+
+test_ustandby:
+	tst	#SUSP_SH_USTANDBY, r0
+	bt	done_sleep
+
+	/* set mode to "u-standby mode" */
+	mov	#0x10, r1
+
+	/* fall-through */
+
+do_sleep:
+	/* setup and enter selected standby mode */
+	mov.l	5f, r4
+	mov.l	r1, @r4
+	sleep
+
+done_sleep:
+	/* reset standby mode to sleep mode */
+	mov.l	5f, r4
+	mov	#0x00, r1
+	mov.l	r1, @r4
+
+	tst	#SUSP_SH_SF, r0
+	bt	skip_restore_sf
+
+	/* SDRAM: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r2
+	mov.l   4f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+	mov.l	6f, r4
+	mov.l	7f, r1
+	mov.l	8f, r2
+	mov.l	@r4, r3
+	mov	#-1, r4
+	add	r4, r3
+	or	r2, r3
+	mov.l	r3, @r1
+skip_restore_sf:
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+4:	.long	0xfffffbff
+5:	.long	0xa4150020 /* STBCR */
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+
+/* interrupt vector @ 0x600 */
+	.balign 	0x400,0,0x400
+	.long	0xdeadbeef
+	.balign 	0x200,0,0x200
+	/* sh7722 will end up here in sleep mode */
+	rte
+	 nop
+sh_mobile_standby_end:
+
+ENTRY(sh_mobile_standby_size)
+	.long sh_mobile_standby_end - sh_mobile_standby
-- 
cgit v1.2.3


From 50cca715a64b66ccf173767d94d4020ea0a6129c Mon Sep 17 00:00:00 2001
From: Francesco VIRLINZI <francesco.virlinzi@st.com>
Date: Fri, 13 Mar 2009 08:08:01 +0000
Subject: sh: clkfwk: Safer resume from hibernation.

This patch fixes a possible problem in the resume from
hibenration. It temporaneally saves the clk->rate on the
stack to avoid any possible change during the clk->set_parent(..)
call.

Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/clock.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 3209a8740fa..1dc896483b5 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -372,12 +372,14 @@ static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 		if (prev_state.event == PM_EVENT_FREEZE) {
 			list_for_each_entry(clkp, &clock_list, node)
 				if (likely(clkp->ops)) {
+					unsigned long rate = clkp->rate;
+
 					if (likely(clkp->ops->set_parent))
 						clkp->ops->set_parent(clkp,
 							clkp->parent);
 					if (likely(clkp->ops->set_rate))
 						clkp->ops->set_rate(clkp,
-							clkp->rate, NO_CHANGE);
+							rate, NO_CHANGE);
 					else if (likely(clkp->ops->recalc))
 						clkp->ops->recalc(clkp);
 					}
-- 
cgit v1.2.3


From 988f831df398ff36f67b095245060c24c354e9e9 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Mon, 16 Mar 2009 03:22:07 +0000
Subject: sh: Move IRQ multi definition of DMAC to defconfig

When SuperH CPU has IRQ multi of DMAC, SH_DMA_IRQ_MULTI becomes enable.
The following CPU's are Multi IRQ of DMAC now.
 - SH775X and SH7091
 - SH776X
 - SH7780
 - SH7785

If SH_DMA_IRQ_MULTI becomes enable, dma-sh api driver is optimized
for Multi IRQ.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/Kconfig  |  8 ++++++++
 arch/sh/drivers/dma/dma-sh.c | 17 +++++------------
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 57d95fce046..32bb8fa605c 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -9,6 +9,14 @@ config SH_DMA
 	select SH_DMA_API
 	default n
 
+config SH_DMA_IRQ_MULTI
+	bool
+	depends on SH_DMA
+	default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
+		CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+		CPU_SUBTYPE_SH7091 || CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
+		CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 31c2930f2f5..37fb5b8bbc3 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -19,13 +19,6 @@
 #include <asm/io.h>
 #include <asm/dma-sh.h>
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)	|| \
-		defined(CONFIG_CPU_SUBTYPE_SH7764)	|| \
-		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
-		defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define DMAC_IRQ_MULTI	1
-#endif
-
 #if defined(DMAE1_IRQ)
 #define NR_DMAE		2
 #else
@@ -42,7 +35,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
 	if (chan < ARRAY_SIZE(dmte_irq_map))
 		irq = dmte_irq_map[chan];
 
-#if defined(DMAC_IRQ_MULTI)
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
 	if (irq > DMTE6_IRQ)
 		return DMTE6_IRQ;
 	return DMTE0_IRQ;
@@ -96,7 +89,7 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 		return 0;
 
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-#if defined(DMAC_IRQ_MULTI)
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
 				IRQF_SHARED,
 #else
 				IRQF_DISABLED,
@@ -235,7 +228,7 @@ static inline int dmaor_reset(int no)
 #if defined(CONFIG_CPU_SH4)
 static irqreturn_t dma_err(int irq, void *dummy)
 {
-#if defined(DMAC_IRQ_MULTI)
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
 	int cnt = 0;
 	switch (irq) {
 #if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
@@ -283,7 +276,7 @@ static struct dma_info sh_dmac_info = {
 #ifdef CONFIG_CPU_SH4
 static unsigned int get_dma_error_irq(int n)
 {
-#if defined(DMAC_IRQ_MULTI)
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
 	return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6);
 #else
 	return (n == 0) ? DMAE0_IRQ :
@@ -306,7 +299,7 @@ static int __init sh_dmac_init(void)
 
 	for (n = 0; n < NR_DMAE; n++) {
 		i = request_irq(get_dma_error_irq(n), dma_err,
-#if defined(DMAC_IRQ_MULTI)
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
 				IRQF_SHARED,
 #else
 				IRQF_DISABLED,
-- 
cgit v1.2.3


From da62e71d13ad0b76011491e36cb58999c464516a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 17 Mar 2009 09:30:36 +0900
Subject: sh: dma: Make PVR2 DMA configurable.

With arch/sh/drivers/dma/ always being built, the Dreamcast DMA engines
are being unconditionally built in, regardless of whether the DMA API is
enabled or not. This is a regression from previous behaviour, but there
is not much advantage in building them all in unconditionally regardless.
Add a new config option to make it optional, and update the only user of
it to reflect that.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/Kconfig  | 13 +++++++++++++
 arch/sh/drivers/dma/Makefile |  3 ++-
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 32bb8fa605c..ae26610837b 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -54,4 +54,17 @@ config SH_DMABRG
 	  of the SH7760.
 	  Say Y if you want to use Audio/USB DMA on your SH7760 board.
 
+config PVR2_DMA
+	tristate "PowerVR 2 DMAC support"
+	depends on SH_DREAMCAST && SH_DMA
+	help
+	  Selecting this will enable support for the PVR2 DMA controller.
+	  As this chains off of the on-chip DMAC, that must also be
+	  enabled by default.
+
+	  This is primarily used by the pvr2fb framebuffer driver for
+	  certain optimizations, but is not necessary for functionality.
+
+	  If in doubt, say N.
+
 endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
index ab956adacb4..cff52cb6ac7 100644
--- a/arch/sh/drivers/dma/Makefile
+++ b/arch/sh/drivers/dma/Makefile
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
-obj-$(CONFIG_SH_DREAMCAST)	+= dma-pvr2.o dma-g2.o
+obj-$(CONFIG_SH_DREAMCAST)	+= dma-g2.o
+obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o
-- 
cgit v1.2.3


From 40f49e7ed77f1b753a7243c0137e4767a50ea8bd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 17 Mar 2009 12:47:56 +0900
Subject: sh: dma: Make G2 DMA configurable.

Follow the PVR2 DMAC change for G2 DMA.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/Kconfig  | 11 +++++++++++
 arch/sh/drivers/dma/Makefile |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index ae26610837b..f13a05285a9 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -67,4 +67,15 @@ config PVR2_DMA
 
 	  If in doubt, say N.
 
+config G2_DMA
+	tristate "G2 Bus DMA support"
+	depends on SH_DREAMCAST
+	select SH_DMA_API
+	help
+	  This enables support for the DMA controller for the Dreamcast's
+	  G2 bus. Drivers that want this will generally enable this on
+	  their own.
+
+	  If in doubt, say N.
+
 endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
index cff52cb6ac7..c6068137b46 100644
--- a/arch/sh/drivers/dma/Makefile
+++ b/arch/sh/drivers/dma/Makefile
@@ -4,6 +4,6 @@
 
 obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
-obj-$(CONFIG_SH_DREAMCAST)	+= dma-g2.o
 obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
+obj-$(CONFIG_G2_DMA)		+= dma-g2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o
-- 
cgit v1.2.3


From 32910e2c52cae552f2651c5360bae8033adb8aac Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Tue, 17 Mar 2009 05:54:37 +0000
Subject: sh: espt-giga board support

This adds support for the ESPT-Giga (Ethernet Serial Parallel
Translator) SH7763-based reference board.

Board support is relatively sparse, presently supporting serial,
gigabit ethernet, USB host, and MTD.

More information (in Japanese) available at:

	http://www.cente.jp/product/cente_hard/ESPT-Giga.html

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig         |    7 +
 arch/sh/boards/Makefile        |    1 +
 arch/sh/boards/board-espt.c    |  102 ++++
 arch/sh/configs/espt_defconfig | 1190 ++++++++++++++++++++++++++++++++++++++++
 arch/sh/tools/mach-types       |    1 +
 5 files changed, 1301 insertions(+)
 create mode 100644 arch/sh/boards/board-espt.c
 create mode 100644 arch/sh/configs/espt_defconfig

(limited to 'arch')

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index bd3569a9934..48c043bf45c 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -190,6 +190,13 @@ config SH_SH7763RDP
 	  Select SH7763RDP if configuring for a Renesas SH7763
 	  evaluation board.
 
+config SH_ESPT
+	bool "ESPT"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select ESPT if configuring for a Renesas SH7763
+	  with gigabit ether evaluation board.
+
 config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 6f101a8161f..d0daebce8b3 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
+obj-$(CONFIG_SH_ESPT)		+= board-espt.o
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
new file mode 100644
index 00000000000..d5ce5e18eb3
--- /dev/null
+++ b/arch/sh/boards/board-espt.c
@@ -0,0 +1,102 @@
+/*
+ * Data Technology Inc. ESPT-GIGA board suport
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/sh_eth.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * SZ_128K),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * SZ_128K),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+	.width = 2,
+	.parts = espt_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device espt_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = espt_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+	.dev = {
+		.platform_data = &espt_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 57,   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 0,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device espt_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+	&espt_nor_flash_device,
+	&espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+	return platform_add_devices(espt_devices,
+				    ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+	.mv_name = "ESPT-GIGA",
+};
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
new file mode 100644
index 00000000000..873ec42c6e6
--- /dev/null
+++ b/arch/sh/configs/espt_defconfig
@@ -0,0 +1,1190 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc7
+# Tue Mar 17 13:25:58 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_SH7763RDP is not set
+CONFIG_SH_ESPT=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 8f9e1662fa9..4932705603b 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -53,3 +53,4 @@ AP325RXA		SH_AP325RXA
 SH7763RDP		SH_SH7763RDP
 SH7785LCR		SH_SH7785LCR
 URQUELL			SH_URQUELL
+ESPT			SH_ESPT
-- 
cgit v1.2.3


From da78800632197ac12adcdefbf09991d82adb8201 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Tue, 17 Mar 2009 05:53:26 +0000
Subject: sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp

IRQ for sh_eth of sh7763rdp became multi handling.
Therefore, the IRQ number of sh_eth is changed, too.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-sh7763rdp/setup.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 6f926fd2162..390534a0b35 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -63,15 +63,19 @@ static struct platform_device sh7763rdp_nor_flash_device = {
 	},
 };
 
-/* SH-Ether */
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (57,58,59 -> 57)
+ */
 static struct resource sh_eth_resources[] = {
 	{
 		.start  = 0xFEE00800,   /* use eth1 */
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = 58,   /* irq number */
-		.end    = 58,
+		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
-- 
cgit v1.2.3


From 8263a67e169fdf0d06d172acbf6c03ae172a69d4 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 17 Mar 2009 17:49:49 +0900
Subject: sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.

This adds support for extended ASIDs (up to 16-bits) on newer SH-X3 cores
that implement the PTAEX register and respective functionality. Presently
only the 65nm SH7786 (90nm only supports legacy 8-bit ASIDs).

The main change is in how the PTE is written out when loading the entry
in to the TLB, as well as in how the TLB entry is selectively flushed.

While SH-X2 extended mode splits out the memory-mapped U and I-TLB data
arrays for extra bits, extended ASID mode splits out the address arrays.
While we don't use the memory-mapped data array access, the address
array accesses are necessary for selective TLB flushes, so these are
implemented newly and replace the generic SH-4 implementation.

With this, TLB flushes in switch_mm() are almost non-existent on newer
parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                           |  1 +
 arch/sh/Kconfig.cpu                       |  3 +
 arch/sh/include/asm/cpu-features.h        |  1 +
 arch/sh/include/asm/mmu_context.h         | 15 +++--
 arch/sh/include/asm/mmu_context_32.h      | 12 ++++
 arch/sh/include/cpu-sh4/cpu/mmu_context.h | 35 +++++------
 arch/sh/kernel/cpu/sh4/probe.c            |  2 +-
 arch/sh/kernel/setup.c                    |  2 +-
 arch/sh/mm/Makefile_32                    |  6 +-
 arch/sh/mm/tlb-pteaex.c                   | 99 +++++++++++++++++++++++++++++++
 10 files changed, 148 insertions(+), 28 deletions(-)
 create mode 100644 arch/sh/mm/tlb-pteaex.c

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index a0c879d17fd..6c56495fd15 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -365,6 +365,7 @@ config CPU_SUBTYPE_SH7786
 	bool "Support SH7786 processor"
 	select CPU_SH4A
 	select CPU_SHX3
+	select CPU_HAS_PTEAEX
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index 0e27fe3b182..c7d704381a6 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -104,6 +104,9 @@ config CPU_HAS_SR_RB
 config CPU_HAS_PTEA
 	bool
 
+config CPU_HAS_PTEAEX
+	bool
+
 config CPU_HAS_DSP
 	bool
 
diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h
index 86308aa3973..694abe490ed 100644
--- a/arch/sh/include/asm/cpu-features.h
+++ b/arch/sh/include/asm/cpu-features.h
@@ -21,5 +21,6 @@
 #define CPU_HAS_LLSC		0x0040	/* movli.l/movco.l */
 #define CPU_HAS_L2_CACHE	0x0080	/* Secondary cache / URAM */
 #define CPU_HAS_OP32		0x0100	/* 32-bit instruction support */
+#define CPU_HAS_PTEAEX		0x0200	/* PTE ASID Extension support */
 
 #endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 5d9157bd474..2a9c55f1a83 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -19,13 +19,18 @@
  *    (a) TLB cache version (or round, cycle whatever expression you like)
  *    (b) ASID (Address Space IDentifier)
  */
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMU_CONTEXT_ASID_MASK		0x0000ffff
+#else
 #define MMU_CONTEXT_ASID_MASK		0x000000ff
-#define MMU_CONTEXT_VERSION_MASK	0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION	0x00000100
-#define NO_CONTEXT			0UL
+#endif
 
-/* ASID is 8-bit value, so it can't be 0x100 */
-#define MMU_NO_ASID			0x100
+#define MMU_CONTEXT_VERSION_MASK	(~0UL & ~MMU_CONTEXT_ASID_MASK)
+#define MMU_CONTEXT_FIRST_VERSION	(MMU_CONTEXT_ASID_MASK + 1)
+
+/* Impossible ASID value, to differentiate from NO_CONTEXT. */
+#define MMU_NO_ASID			MMU_CONTEXT_FIRST_VERSION
+#define NO_CONTEXT			0UL
 
 #define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
 
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index f4f9aebd68b..8ef800c549a 100644
--- a/arch/sh/include/asm/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
@@ -10,6 +10,17 @@ static inline void destroy_context(struct mm_struct *mm)
 	/* Do nothing */
 }
 
+#ifdef CONFIG_CPU_HAS_PTEAEX
+static inline void set_asid(unsigned long asid)
+{
+	__raw_writel(asid, MMU_PTEAEX);
+}
+
+static inline unsigned long get_asid(void)
+{
+	return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
+}
+#else
 static inline void set_asid(unsigned long asid)
 {
 	unsigned long __dummy;
@@ -33,6 +44,7 @@ static inline unsigned long get_asid(void)
 	asid &= MMU_CONTEXT_ASID_MASK;
 	return asid;
 }
+#endif /* CONFIG_CPU_HAS_PTEAEX */
 
 /* MMU_TTB is used for optimizing the fault handling. */
 static inline void set_TTB(pgd_t *pgd)
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 9ea8eb27b18..3ce7ef6c297 100644
--- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
@@ -14,28 +14,35 @@
 #define MMU_PTEL	0xFF000004	/* Page table entry register LOW */
 #define MMU_TTB		0xFF000008	/* Translation table base register */
 #define MMU_TEA		0xFF00000C	/* TLB Exception Address */
-#define MMU_PTEA	0xFF000034	/* Page table entry assistance register */
+#define MMU_PTEA	0xFF000034	/* PTE assistance register */
+#define MMU_PTEAEX	0xFF00007C	/* PTE ASID extension register */
 
 #define MMUCR		0xFF000010	/* MMU Control Register */
 
-#define MMU_ITLB_ADDRESS_ARRAY	0xF2000000
 #define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
+#define MMU_UTLB_ADDRESS_ARRAY2	0xF6800000
 #define MMU_PAGE_ASSOC_BIT	0x80
 
 #define MMUCR_TI		(1<<2)
 
-#ifdef CONFIG_X2TLB
-#define MMUCR_ME		(1 << 7)
-#else
-#define MMUCR_ME		(0)
-#endif
-
 #if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
 #define MMUCR_SE		(1 << 4)
 #else
 #define MMUCR_SE		(0)
 #endif
 
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMUCR_AEX		(1 << 6)
+#else
+#define MMUCR_AEX		(0)
+#endif
+
+#ifdef CONFIG_X2TLB
+#define MMUCR_ME		(1 << 7)
+#else
+#define MMUCR_ME		(0)
+#endif
+
 #ifdef CONFIG_SH_STORE_QUEUES
 #define MMUCR_SQMD		(1 << 9)
 #else
@@ -43,17 +50,7 @@
 #endif
 
 #define MMU_NTLB_ENTRIES	64
-#define MMU_CONTROL_INIT	(0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE)
-
-#define MMU_ITLB_DATA_ARRAY	0xF3000000
-#define MMU_UTLB_DATA_ARRAY	0xF7000000
-
-#define MMU_UTLB_ENTRIES	   64
-#define MMU_U_ENTRY_SHIFT	    8
-#define MMU_UTLB_VALID		0x100
-#define MMU_ITLB_ENTRIES	    4
-#define MMU_I_ENTRY_SHIFT	    8
-#define MMU_ITLB_VALID		0x100
+#define MMU_CONTROL_INIT	(0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE|MMUCR_AEX)
 
 #define TRA	0xff000020
 #define EXPEVT	0xff000024
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 2bd0ec96263..3d3a3c4425a 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -134,7 +134,7 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.icache.ways = 4;
 		boot_cpu_data.dcache.ways = 4;
 		boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
-			CPU_HAS_LLSC;
+			CPU_HAS_LLSC | CPU_HAS_PTEAEX;
 		break;
 	case 0x3008:
 		boot_cpu_data.icache.ways = 4;
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 61ab2a7f864..24c60251f68 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -449,7 +449,7 @@ EXPORT_SYMBOL(get_cpu_subtype);
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
 static const char *cpu_flags[] = {
 	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
-	"ptea", "llsc", "l2", "op32", NULL
+	"ptea", "llsc", "l2", "op32", "pteaex", NULL
 };
 
 static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index 469ff167245..986a1e05583 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -25,8 +25,10 @@ obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
 endif
 
 ifdef CONFIG_MMU
-obj-$(CONFIG_CPU_SH3)	+= tlb-sh3.o
-obj-$(CONFIG_CPU_SH4)	+= tlb-sh4.o
+tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
+obj-y				+= $(tlb-y)
 ifndef CONFIG_CACHE_OFF
 obj-$(CONFIG_CPU_SH4)		+= pg-sh4.o
 obj-$(CONFIG_SH7705_CACHE_32KB)	+= pg-sh7705.o
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
new file mode 100644
index 00000000000..5c9b2d781e0
--- /dev/null
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -0,0 +1,99 @@
+/*
+ * arch/sh/mm/tlb-pteaex.c
+ *
+ * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions.
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void update_mmu_cache(struct vm_area_struct * vma,
+		      unsigned long address, pte_t pte)
+{
+	unsigned long flags;
+	unsigned long pteval;
+	unsigned long vpn;
+
+	/* Ptrace may call this routine. */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+#ifndef CONFIG_CACHE_OFF
+	{
+		unsigned long pfn = pte_pfn(pte);
+
+		if (pfn_valid(pfn)) {
+			struct page *page = pfn_to_page(pfn);
+
+			if (!test_bit(PG_mapped, &page->flags)) {
+				unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+				__flush_wback_region((void *)P1SEGADDR(phys),
+						     PAGE_SIZE);
+				__set_bit(PG_mapped, &page->flags);
+			}
+		}
+	}
+#endif
+
+	local_irq_save(flags);
+
+	/* Set PTEH register */
+	vpn = address & MMU_VPN_MASK;
+	__raw_writel(vpn, MMU_PTEH);
+
+	/* Set PTEAEX */
+	__raw_writel(get_asid(), MMU_PTEAEX);
+
+	pteval = pte.pte_low;
+
+	/* Set PTEA register */
+#ifdef CONFIG_X2TLB
+	/*
+	 * For the extended mode TLB this is trivial, only the ESZ and
+	 * EPR bits need to be written out to PTEA, with the remainder of
+	 * the protection bits (with the exception of the compat-mode SZ
+	 * and PR bits, which are cleared) being written out in PTEL.
+	 */
+	__raw_writel(pte.pte_high, MMU_PTEA);
+#else
+	/* TODO: make this look less hacky */
+	__raw_writel(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
+#endif
+
+	/* Set PTEL register */
+	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+#ifdef CONFIG_CACHE_WRITETHROUGH
+	pteval |= _PAGE_WT;
+#endif
+	/* conveniently, we want all the software flags to be 0 anyway */
+	__raw_writel(pteval, MMU_PTEL);
+
+	/* Load the TLB */
+	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+	local_irq_restore(flags);
+}
+
+/*
+ * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB
+ * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped
+ * address arrays. In compat mode the second array is inaccessible, while
+ * in extended mode, the legacy 8-bit ASID field in address array 1 has
+ * undefined behaviour.
+ */
+void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
+						 unsigned long page)
+{
+	jump_to_uncached();
+	__raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
+	__raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
+	back_to_cached();
+}
-- 
cgit v1.2.3


From c54a43e90b80993b2e0772d678563cb2bc6a1b3b Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 17 Mar 2009 17:58:33 +0900
Subject: sh: tlb-pteaex: Kill off legacy PTEA updates.

While harmless, PTEA has different semantics on these parts, and is only
used in extended TLB mode. Kill off the legacy support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/tlb-pteaex.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index 5c9b2d781e0..2aab3ea934d 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -64,9 +64,6 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	 * and PR bits, which are cleared) being written out in PTEL.
 	 */
 	__raw_writel(pte.pte_high, MMU_PTEA);
-#else
-	/* TODO: make this look less hacky */
-	__raw_writel(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
 #endif
 
 	/* Set PTEL register */
-- 
cgit v1.2.3


From 3a3b311ca375a37b29bb78b030f96bf97dee97f5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 17 Mar 2009 17:59:31 +0900
Subject: sh: Update debugfs ASID dumping for 16-bit ASID support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/asids-debugfs.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/asids-debugfs.c b/arch/sh/mm/asids-debugfs.c
index 8e912a15e94..cd8c3bf39b5 100644
--- a/arch/sh/mm/asids-debugfs.c
+++ b/arch/sh/mm/asids-debugfs.c
@@ -37,10 +37,8 @@ static int asids_seq_show(struct seq_file *file, void *iter)
 			continue;
 
 		if (p->mm)
-			seq_printf(file, "%5d : %02lx\n", pid,
+			seq_printf(file, "%5d : %04lx\n", pid,
 				   cpu_asid(smp_processor_id(), p->mm));
-		else
-			seq_printf(file, "%5d : (none)\n", pid);
 	}
 
 	read_unlock(&tasklist_lock);
-- 
cgit v1.2.3


From c20351846efcb755ba849d9fb701fbd9a1ffb7c2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 17 Mar 2009 21:19:49 +0900
Subject: sh: Flush only the needed range when unmapping a VMA.

This follows the ARM change from Aaro Koskinen:

	When unmapping N pages (e.g. shared memory) the amount of TLB
	flushes done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it
	should be N at maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8
	pages, so there is a noticeable performance penalty when
	unmapping a large VMA and the system is spending its time in
	flush_tlb_range().

	The problem is that tlb_end_vma() is always flushing the full VMA
	range. The subrange that needs to be flushed can be calculated by
	tlb_remove_tlb_entry(). This approach was suggested by Hugh
	Dickins, and is also used by other arches.

	The speed increase is roughly 3x for 8M mappings and for larger
	mappings even more.

Bits and peices are taken from the ARM patch as well as the existing
arch/um implementation that is quite similar.

The end result is a significant reduction in both partial and full TLB
flushes initiated through flush_tlb_range().

At the same time, the nommu implementation was broken, had a superfluous
cache flush, and subsequently would have triggered a BUG_ON() if a
code-path had triggered it. Tidy this up for correctness and provide a
nopped-out implementation there.

More background on the initial discussion can be found at:

	http://marc.info/?t=123609820900002&r=1&w=2
	http://marc.info/?t=123660375800003&r=1&w=2

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/tlb.h | 100 ++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 92 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index 88ff1ae8a6b..9c16f737074 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -6,22 +6,106 @@
 #endif
 
 #ifndef __ASSEMBLY__
+#include <linux/pagemap.h>
+
+#ifdef CONFIG_MMU
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		fullmm;
+	unsigned long		start, end;
+};
 
-#define tlb_start_vma(tlb, vma) \
-	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-#define tlb_end_vma(tlb, vma)	\
-	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+static inline void init_tlb_gather(struct mmu_gather *tlb)
+{
+	tlb->start = TASK_SIZE;
+	tlb->end = 0;
 
-#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+	if (tlb->fullmm) {
+		tlb->start = 0;
+		tlb->end = TASK_SIZE;
+	}
+}
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush;
+
+	init_tlb_gather(tlb);
+
+	return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	if (tlb->fullmm)
+		flush_tlb_mm(tlb->mm);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+	if (tlb->start > address)
+		tlb->start = address;
+	if (tlb->end < address + PAGE_SIZE)
+		tlb->end = address + PAGE_SIZE;
+}
 
 /*
- * Flush whole TLBs for MM
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
  */
-#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm && tlb->end) {
+		flush_tlb_range(vma, tlb->start, tlb->end);
+		init_tlb_gather(tlb);
+	}
+}
+
+#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp)		pud_free((tlb)->mm, pudp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#else /* CONFIG_MMU */
+
+#define tlb_start_vma(tlb, vma)				do { } while (0)
+#define tlb_end_vma(tlb, vma)				do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+#define tlb_flush(tlb)					do { } while (0)
 
-#include <linux/pagemap.h>
 #include <asm-generic/tlb.h>
 
+#endif /* CONFIG_MMU */
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_SH_TLB_H */
-- 
cgit v1.2.3


From 0a07232ff62d1523c5fa7292180890f4de670b95 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Fri, 13 Mar 2009 17:57:04 +0100
Subject: IXP4xx: workaround for PCI prefetch problems near 64 MB boundary.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Map unused registers at the end of DMA region at 64 MB to allow PCI masters
to cross the boundary when prefetching data from SDRAM.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/include/asm/sizes.h      |  1 +
 arch/arm/mach-ixp4xx/common-pci.c | 23 ++++++++++++-----------
 2 files changed, 13 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index 503843db156..c10d1aa4b48 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -43,6 +43,7 @@
 #define SZ_8M                           0x00800000
 #define SZ_16M                          0x01000000
 #define SZ_32M                          0x02000000
+#define SZ_48M                          0x03000000
 #define SZ_64M                          0x04000000
 #define SZ_128M                         0x08000000
 #define SZ_256M                         0x10000000
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index d816c51320c..2d0f09e9819 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -366,7 +366,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 }
 
 void __init ixp4xx_pci_preinit(void)
-{  
+{
 	unsigned long cpuid = read_cpuid_id();
 
 	/*
@@ -386,17 +386,17 @@ void __init ixp4xx_pci_preinit(void)
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
-	/* 
+	/*
 	 * We use identity AHB->PCI address translation
 	 * in the 0x48000000 to 0x4bffffff address space
 	 */
 	*PCI_PCIMEMBASE = 0x48494A4B;
 
-	/* 
+	/*
 	 * We also use identity PCI->AHB address translation
 	 * in 4 16MB BARs that begin at the physical memory start
 	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + 
+	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
 		((PHYS_OFFSET & 0xFF000000) >> 8) +
 		((PHYS_OFFSET & 0xFF000000) >> 16) +
 		((PHYS_OFFSET & 0xFF000000) >> 24) +
@@ -408,18 +408,19 @@ void __init ixp4xx_pci_preinit(void)
 		pr_debug("setup BARs in controller\n");
 
 		/*
-		 * We configure the PCI inbound memory windows to be 
+		 * We configure the PCI inbound memory windows to be
 		 * 1:1 mapped to SDRAM
 		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
-		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);
+		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
+		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
+		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
+		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M);
 
 		/*
-		 * Enable CSR window at 0xff000000.
+		 * Enable CSR window at 64 MiB to allow PCI masters
+		 * to continue prefetching past 64 MiB boundary.
 		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);
+		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
 
 		/*
 		 * Enable the IO window to be way up high, at 0xfffffc00
-- 
cgit v1.2.3


From 5ca328d24d25fa2c8d2aa33cb85116695be11070 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Fri, 13 Mar 2009 19:09:00 +0100
Subject: IXP4xx: add Ethernet and NPE support for IXP43x CPU.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/ixp4xx_npe.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index c73a94d0ca2..25231023490 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
 		for (i = 0; i < image->size; i++)
 			image->data[i] = swab32(image->data[i]);
 
-	if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-		print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+	if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
+		print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
 			  "IXP42x\n");
 		goto err;
 	}
@@ -596,7 +596,7 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
 
-	if (!cpu_is_ixp46x()) {
+	if (cpu_is_ixp42x()) {
 		if (!npe->id)
 			instr_size = NPE_A_42X_INSTR_SIZE;
 		else
-- 
cgit v1.2.3


From de3ce856d67b770f7d546e3f3e6a3972deb319a8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Tue, 17 Mar 2009 13:51:52 +0100
Subject: IXP4xx: cpu_is_ixp4*() now recognizes all IXP4xx processors.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/include/mach/cpu.h         | 35 ++++++++++++---------
 arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h | 42 +++++++++++++++++++------
 2 files changed, 52 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index 51bd69c46d9..def7773be67 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -17,26 +17,31 @@
 #include <asm/cputype.h>
 
 /* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE	0x69054040
-#define IXP465_PROCESSOR_ID_VALUE	0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP465_PROCESSOR_ID_VALUE)
+#define IXP42X_PROCESSOR_ID_VALUE	0x690541c0 /* including unused 0x690541Ex */
+#define IXP42X_PROCESSOR_ID_MASK	0xffffffc0
+
+#define IXP43X_PROCESSOR_ID_VALUE	0x69054040
+#define IXP43X_PROCESSOR_ID_MASK	0xfffffff0
+
+#define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
+#define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
+			 IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
+			 IXP43X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
+			 IXP46X_PROCESSOR_ID_VALUE)
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
 	unsigned int val = ~*IXP4XX_EXP_CFG2;
-	val &= ~IXP4XX_FEATURE_RESERVED;
-	if (!cpu_is_ixp46x())
-		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
 
-	return val;
+	if (cpu_is_ixp42x())
+		return val & IXP42X_FEATURE_MASK;
+	if (cpu_is_ixp43x())
+		return val & IXP43X_FEATURE_MASK;
+	return val & IXP46X_FEATURE_MASK;
 }
 
 static inline void ixp4xx_write_feature_bits(u32 value)
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index ad9c888dd85..97c530f66e7 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -604,6 +604,7 @@
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
 /* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
 #define IXP4XX_FEATURE_RCOMP		(1 << 0)
 #define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
 #define IXP4XX_FEATURE_HASH		(1 << 2)
@@ -619,20 +620,41 @@
 #define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
 #define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
 #define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
 #define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
+					 IXP4XX_FEATURE_USB_DEVICE       | \
+					 IXP4XX_FEATURE_HASH             | \
+					 IXP4XX_FEATURE_AES              | \
+					 IXP4XX_FEATURE_DES              | \
+					 IXP4XX_FEATURE_HDLC             | \
+					 IXP4XX_FEATURE_AAL              | \
+					 IXP4XX_FEATURE_HSS              | \
+					 IXP4XX_FEATURE_UTOPIA           | \
+					 IXP4XX_FEATURE_NPEB_ETH0        | \
+					 IXP4XX_FEATURE_NPEC_ETH         | \
+					 IXP4XX_FEATURE_RESET_NPEA       | \
+					 IXP4XX_FEATURE_RESET_NPEB       | \
+					 IXP4XX_FEATURE_RESET_NPEC       | \
+					 IXP4XX_FEATURE_PCI              | \
+					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
 #define IXP4XX_FEATURE_USB_HOST		(1 << 18)
 #define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
+					 IXP4XX_FEATURE_USB_HOST         | \
+					 IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
 #define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
 #define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
-				    IXP4XX_FEATURE_USB_HOST |		\
-				    IXP4XX_FEATURE_NPEA_ETH |		\
-				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
-				    IXP4XX_FEATURE_RSA |		\
-				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
+					 IXP4XX_FEATURE_RSA)
 
 #endif
-- 
cgit v1.2.3


From 7f3ccb5a22c945916390a9bd7101d0f553fa0fbd Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Tue, 17 Mar 2009 14:39:30 +0100
Subject: IXP4xx: PCI ixp4xx_scan_bus() is __devinit.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/common-pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 2d0f09e9819..70afcfe5b88 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -501,7 +501,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
-- 
cgit v1.2.3


From 7be5c55af0cc58e54e42e1702d837527e15b8414 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 18 Mar 2009 08:47:31 +0000
Subject: sh: simplify kexec vbr code

Setup the vbr register in machine_kexec(). This
instead of passing values to the assembly snippet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machine_kexec.c   | 17 ++++++++---------
 arch/sh/kernel/relocate_kernel.S |  4 ----
 2 files changed, 8 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 94df56b0d1f..d3318f99256 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -23,8 +23,7 @@
 typedef NORET_TYPE void (*relocate_new_kernel_t)(
 				unsigned long indirection_page,
 				unsigned long reboot_code_buffer,
-				unsigned long start_address,
-				unsigned long vbr_reg) ATTRIB_NORET;
+				unsigned long start_address) ATTRIB_NORET;
 
 extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
@@ -76,14 +75,8 @@ void machine_kexec(struct kimage *image)
 
 	unsigned long page_list;
 	unsigned long reboot_code_buffer;
-	unsigned long vbr_reg;
 	relocate_new_kernel_t rnk;
 
-#if defined(CONFIG_SH_STANDARD_BIOS)
-	vbr_reg = ((unsigned long )gdb_vbr_vector) - 0x100;
-#else
-	vbr_reg = 0x80000000;  // dummy
-#endif
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
@@ -100,9 +93,15 @@ void machine_kexec(struct kimage *image)
         kexec_info(image);
 	flush_cache_all();
 
+	set_bl_bit();
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	asm volatile("ldc %0, vbr" :
+		     : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
+		     : "memory");
+#endif
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start));
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
index c66cb3209db..8b50b2c873a 100644
--- a/arch/sh/kernel/relocate_kernel.S
+++ b/arch/sh/kernel/relocate_kernel.S
@@ -16,7 +16,6 @@ relocate_new_kernel:
 	/* r4 = indirection_page   */
 	/* r5 = reboot_code_buffer */
 	/* r6 = start_address      */
-	/* r7 = vbr_reg            */
 
 	mov.l	10f,r8	  /* PAGE_SIZE */
 	mov.l	11f,r9    /* P2SEG */
@@ -80,9 +79,6 @@ relocate_new_kernel:
 	bra	0b
 	nop
 6:
-#ifdef CONFIG_SH_STANDARD_BIOS
-	ldc   r7, vbr
-#endif
 	jmp @r6
 	nop
 
-- 
cgit v1.2.3


From e4e063d0c288bd65c56dd855337780a541ed928d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 18 Mar 2009 08:49:45 +0000
Subject: sh: rework kexec segment code

Rework the kexec code to avoid using P2SEG. Instead
we walk the page list in machine_kexec() and convert
the addresses from physical to virtual using C.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machine_kexec.c   | 17 ++++++++++++++++-
 arch/sh/kernel/relocate_kernel.S |  6 +-----
 2 files changed, 17 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index d3318f99256..25b4748fdc7 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -76,6 +76,21 @@ void machine_kexec(struct kimage *image)
 	unsigned long page_list;
 	unsigned long reboot_code_buffer;
 	relocate_new_kernel_t rnk;
+	unsigned long entry;
+	unsigned long *ptr;
+
+	/*
+	 * Nicked from the mips version of machine_kexec():
+	 * The generic kexec code builds a page list with physical
+	 * addresses. Use phys_to_virt() to convert them to virtual.
+	 */
+	for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
+	     ptr = (entry & IND_INDIRECTION) ?
+	       phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
+		if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+		    *ptr & IND_DESTINATION)
+			*ptr = (unsigned long) phys_to_virt(*ptr);
+	}
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
@@ -101,7 +116,7 @@ void machine_kexec(struct kimage *image)
 #endif
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start));
+	(*rnk)(page_list, reboot_code_buffer, image->start);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
index 8b50b2c873a..2a6630be668 100644
--- a/arch/sh/kernel/relocate_kernel.S
+++ b/arch/sh/kernel/relocate_kernel.S
@@ -18,7 +18,6 @@ relocate_new_kernel:
 	/* r6 = start_address      */
 
 	mov.l	10f,r8	  /* PAGE_SIZE */
-	mov.l	11f,r9    /* P2SEG */
 
 	/*  stack setting */
 	add	r8,r5
@@ -29,9 +28,8 @@ relocate_new_kernel:
 0:
 	mov.l	@r4+,r0	  /* cmd = *ind++ */
 
-1:	/* addr = (cmd | P2SEG) & 0xfffffff0 */
+1:	/* addr = cmd & 0xfffffff0 */
 	mov	r0,r2
-	or	r9,r2
 	mov	#-16,r1
 	and	r1,r2
 
@@ -85,8 +83,6 @@ relocate_new_kernel:
 	.align 2
 10:
 	.long	PAGE_SIZE
-11:
-	.long	P2SEG
 
 relocate_new_kernel_end:
 
-- 
cgit v1.2.3


From b7cf6ddc13186f9272438a97aa75972d496d0b0a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 18 Mar 2009 08:51:29 +0000
Subject: sh: add kexec jump support

Add kexec jump support to the SuperH architecture.

Similar to the x86 implementation, with the following
exceptions:

- Instead of separating the assembly code flow into
two parts for regular kexec and kexec jump we use a
single code path. In the assembly snippet regular
kexec is just kexec jump that never comes back.

- Instead of using a swap page when moving data between
pages the page copy assembly routine has been modified
to exchange the data between the pages using registers.

- We walk the page list twice in machine_kexec() to
do and undo physical to virtual address conversion.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                  |   7 ++
 arch/sh/kernel/machine_kexec.c   |  32 ++++++-
 arch/sh/kernel/relocate_kernel.S | 195 +++++++++++++++++++++++++++++++++------
 3 files changed, 202 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6c56495fd15..8d50d527c59 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -559,6 +559,13 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code via KEXEC
+
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 25b4748fdc7..c44efb73ab1 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -14,20 +14,21 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/numa.h>
+#include <linux/suspend.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
 #include <asm/cacheflush.h>
 
-typedef NORET_TYPE void (*relocate_new_kernel_t)(
-				unsigned long indirection_page,
-				unsigned long reboot_code_buffer,
-				unsigned long start_address) ATTRIB_NORET;
+typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
+				      unsigned long reboot_code_buffer,
+				      unsigned long start_address);
 
 extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
 extern void *gdb_vbr_vector;
+extern void *vbr_base;
 
 void machine_shutdown(void)
 {
@@ -72,7 +73,6 @@ static void kexec_info(struct kimage *image)
  */
 void machine_kexec(struct kimage *image)
 {
-
 	unsigned long page_list;
 	unsigned long reboot_code_buffer;
 	relocate_new_kernel_t rnk;
@@ -92,6 +92,11 @@ void machine_kexec(struct kimage *image)
 			*ptr = (unsigned long) phys_to_virt(*ptr);
 	}
 
+#ifdef CONFIG_KEXEC_JUMP
+	if (image->preserve_context)
+		save_processor_state();
+#endif
+
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
@@ -117,6 +122,23 @@ void machine_kexec(struct kimage *image)
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
 	(*rnk)(page_list, reboot_code_buffer, image->start);
+
+#ifdef CONFIG_KEXEC_JUMP
+	asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+	local_irq_disable();
+	clear_bl_bit();
+	if (image->preserve_context)
+		restore_processor_state();
+
+	/* Convert page list back to physical addresses, what a mess. */
+	for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
+	     ptr = (*ptr & IND_INDIRECTION) ?
+	       phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) {
+		if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+		    *ptr & IND_DESTINATION)
+			*ptr = virt_to_phys(*ptr);
+	}
+#endif
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
index 2a6630be668..fcc9934fb97 100644
--- a/arch/sh/kernel/relocate_kernel.S
+++ b/arch/sh/kernel/relocate_kernel.S
@@ -4,6 +4,8 @@
  *
  * LANDISK/sh4 is supported. Maybe, SH archtecture works well.
  *
+ * 2009-03-18 Magnus Damm - Added Kexec Jump support
+ *
  * This source code is licensed under the GNU General Public License,
  * Version 2.  See the file COPYING for more details.
  */
@@ -17,14 +19,135 @@ relocate_new_kernel:
 	/* r5 = reboot_code_buffer */
 	/* r6 = start_address      */
 
-	mov.l	10f,r8	  /* PAGE_SIZE */
+	mov.l	10f, r0		/* PAGE_SIZE */
+	add	r5, r0		/* setup new stack at end of control page */
+
+	/* save r15->r8 to new stack */
+	mov.l	r15, @-r0
+	mov	r0, r15
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	/* save other random registers */
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	stc.l	ssr, @-r15
+	stc.l	sr, @-r15
+	sts.l	pr, @-r15
+	stc.l	spc, @-r15
+
+	/* switch to bank1 and save r7->r0 */
+	mov.l	12f, r9
+	stc	sr, r8
+	or	r9, r8
+	ldc	r8, sr
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	mov.l	r0, @-r15
+
+	/* switch to bank0 and save r7->r0 */
+	mov.l	12f, r9
+	not	r9, r9
+	stc	sr, r8
+	and	r9, r8
+	ldc	r8, sr
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	mov.l	r0, @-r15
+
+	mov.l	r4, @-r15	/* save indirection page again */
+
+	bsr	swap_pages	/* swap pages before jumping to new kernel */
+	 nop
+
+	mova	11f, r0
+	mov.l	r15, @r0	/* save pointer to stack */
+
+	jsr	@r6		/* hand over control to new kernel */
+	 nop
+
+	mov.l	11f, r15	/* get pointer to stack */
+	mov.l	@r15+, r4	/* restore r4 to get indirection page */
 
-	/*  stack setting */
-	add	r8,r5
-	mov	r5,r15
+	bsr	swap_pages	/* swap pages back to previous state */
+	 nop
 
+	/* make sure bank0 is active and restore r0->r7 */
+	mov.l	12f, r9
+	not	r9, r9
+	stc	sr, r8
+	and	r9, r8
+	ldc	r8, sr
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+
+	/* switch to bank1 and restore r0->r7 */
+	mov.l	12f, r9
+	stc	sr, r8
+	or	r9, r8
+	ldc	r8, sr
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	mov.l	@r15+, r7
+
+	/* switch back to bank0 */
+	mov.l	12f, r9
+	not	r9, r9
+	stc	sr, r8
+	and	r9, r8
+	ldc	r8, sr
+
+	/* restore other random registers */
+	ldc.l	@r15+, spc
+	lds.l	@r15+, pr
+	ldc.l	@r15+, sr
+	ldc.l	@r15+, ssr
+	ldc.l	@r15+, gbr
+	lds.l	@r15+, mach
+	lds.l	@r15+, macl
+
+	/* restore r8->r15 */
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	mov.l	@r15+, r15
+	rts
+	 nop
+
+swap_pages:
 	bra	1f
-	mov	r4,r0	  /* cmd = indirection_page */
+	 mov	r4,r0	  /* cmd = indirection_page */
 0:
 	mov.l	@r4+,r0	  /* cmd = *ind++ */
 
@@ -37,52 +160,70 @@ relocate_new_kernel:
 	tst	#1,r0
 	bt	2f
 	bra	0b
-	mov	r2,r5
+	 mov	r2,r5
 
 2:	/* else if(cmd & IND_INDIRECTION) ind = addr  */
 	tst	#2,r0
 	bt	3f
 	bra	0b
-	mov	r2,r4
+	 mov	r2,r4
 
-3:	/* else if(cmd & IND_DONE) goto 6  */
+3:	/* else if(cmd & IND_DONE) return */
 	tst	#4,r0
 	bt	4f
-	bra	6f
-	nop
+	rts
+	 nop
 
 4:	/* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
 	tst	#8,r0
 	bt	0b
 
-	mov	r8,r3
+	mov.l	10f,r3	  /* PAGE_SIZE */
 	shlr2	r3
 	shlr2	r3
 5:
 	dt	r3
-	mov.l	@r2+,r1   /*  16n+0 */
-	mov.l	r1,@r5
-	add	#4,r5
-	mov.l	@r2+,r1	  /*  16n+4 */
-	mov.l	r1,@r5
-	add	#4,r5
-	mov.l	@r2+,r1   /*  16n+8 */
-	mov.l	r1,@r5
-	add	#4,r5
-	mov.l	@r2+,r1   /*  16n+12 */
-	mov.l	r1,@r5
-	add	#4,r5
+
+	/* regular kexec just overwrites the destination page
+	 * with the contents of the source page.
+	 * for the kexec jump case we need to swap the contents
+	 * of the pages.
+	 * to keep it simple swap the contents for both cases.
+	 */
+	mov.l	@(0, r2), r8
+	mov.l	@(0, r5), r1
+	mov.l	r8, @(0, r5)
+	mov.l	r1, @(0, r2)
+
+	mov.l	@(4, r2), r8
+	mov.l	@(4, r5), r1
+	mov.l	r8, @(4, r5)
+	mov.l	r1, @(4, r2)
+
+	mov.l	@(8, r2), r8
+	mov.l	@(8, r5), r1
+	mov.l	r8, @(8, r5)
+	mov.l	r1, @(8, r2)
+
+	mov.l	@(12, r2), r8
+	mov.l	@(12, r5), r1
+	mov.l	r8, @(12, r5)
+	mov.l	r1, @(12, r2)
+
+	add	#16,r5
+	add	#16,r2
 	bf	5b
 
 	bra	0b
-	nop
-6:
-	jmp @r6
-	nop
+	 nop
 
 	.align 2
 10:
 	.long	PAGE_SIZE
+11:
+	.long	0
+12:
+	.long	0x20000000 ! RB=1
 
 relocate_new_kernel_end:
 
-- 
cgit v1.2.3


From a6bab7b5c18501e4dd3201ae8ac1dc6da5f07acc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 18 Mar 2009 19:06:15 +0900
Subject: sh: kexec: Drop SR.BL bit toggling.

For the time being, this creates far more problems than it solves,
evident by the second local_irq_disable(). Kill all of this off
and rely on IRQ disabling to protect against the VBR reload.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machine_kexec.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index c44efb73ab1..69268c0d806 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -110,23 +110,22 @@ void machine_kexec(struct kimage *image)
 	memcpy((void *)reboot_code_buffer, relocate_new_kernel,
 						relocate_new_kernel_size);
 
-        kexec_info(image);
+	kexec_info(image);
 	flush_cache_all();
 
-	set_bl_bit();
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	asm volatile("ldc %0, vbr" :
 		     : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
 		     : "memory");
 #endif
+
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
 	(*rnk)(page_list, reboot_code_buffer, image->start);
 
 #ifdef CONFIG_KEXEC_JUMP
 	asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
-	local_irq_disable();
-	clear_bl_bit();
+
 	if (image->preserve_context)
 		restore_processor_state();
 
-- 
cgit v1.2.3


From 7e6b6f2b949a52382f59a93ecbe86e32e4fcec7c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 18 Mar 2009 19:07:16 +0900
Subject: sh: kexec jump: fix for ftrace.

Save and restore ftrace state when returning from kexec jump in
machine_kexec(). Follows the x86 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machine_kexec.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 69268c0d806..cc7c29b0dc8 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/numa.h>
+#include <linux/ftrace.h>
 #include <linux/suspend.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -78,6 +79,7 @@ void machine_kexec(struct kimage *image)
 	relocate_new_kernel_t rnk;
 	unsigned long entry;
 	unsigned long *ptr;
+	int save_ftrace_enabled;
 
 	/*
 	 * Nicked from the mips version of machine_kexec():
@@ -97,6 +99,8 @@ void machine_kexec(struct kimage *image)
 		save_processor_state();
 #endif
 
+	save_ftrace_enabled = __ftrace_enabled_save();
+
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
@@ -138,6 +142,8 @@ void machine_kexec(struct kimage *image)
 			*ptr = virt_to_phys(*ptr);
 	}
 #endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
 void arch_crash_save_vmcoreinfo(void)
-- 
cgit v1.2.3


From d1b95607e1dde59e2ffae661732c8da34aba445c Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 15:17:32 +0100
Subject: [ARM] pxa: add missing pin function for CS2 on GPIO1

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index bc1fb33a6e7..928fbef9cbf 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -41,6 +41,7 @@
 #endif
 
 /* Chip Select */
+#define GPIO1_nCS2		MFP_CFG(GPIO1,	AF1)
 #define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
 
 /* AC97 */
-- 
cgit v1.2.3


From c68ffddabcaaa64c6ea681d2944cbda50a8654ea Mon Sep 17 00:00:00 2001
From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Thu, 5 Mar 2009 18:17:53 +0300
Subject: [ARM] pxa: make second argument of clk_add_alias a name instead of
 the device

clk_add_alias is commonly called for platform devices that are not yet
registered in the device tree. Thus the clock alias is associated with
NULL device name. Fix this by passing the device name instead of just
device pointer.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/clock.c | 4 ++--
 arch/arm/mach-pxa/clock.h | 2 +-
 arch/arm/mach-pxa/e740.c  | 2 +-
 arch/arm/mach-pxa/e750.c  | 2 +-
 arch/arm/mach-pxa/e800.c  | 2 +-
 arch/arm/mach-pxa/tosa.c  | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 40b77408451..db52d2c4791 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -87,7 +87,7 @@ void clks_register(struct clk_lookup *clks, size_t num)
 		clkdev_add(&clks[i]);
 }
 
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
 	struct device *dev)
 {
 	struct clk *r = clk_get(dev, id);
@@ -96,7 +96,7 @@ int clk_add_alias(char *alias, struct device *alias_dev, char *id,
 	if (!r)
 		return -ENODEV;
 
-	l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL);
+	l = clkdev_alloc(r, alias, alias_dev_name);
 	clk_put(r);
 	if (!l)
 		return -ENODEV;
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 4e9c613c676..5599bceff73 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -69,6 +69,6 @@ extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
 void clks_register(struct clk_lookup *clks, size_t num);
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_name, char *id,
 	struct device *dev);
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00f4f0..f2402f669b5 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -189,7 +189,7 @@ static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
 	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev,
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8edb97..1379f9ad66a 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -190,7 +190,7 @@ static struct platform_device *devices[] __initdata = {
 static void __init e750_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index cc9b1293e86..0cc0062ea83 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -196,7 +196,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
-	clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 3332e5d0356..3fe137fc72d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -919,7 +919,7 @@ static void __init tosa_init(void)
 	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
-	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
-- 
cgit v1.2.3


From be093beb608edf821b45fe00a8a080fb5c6ed4af Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 19 Mar 2009 16:20:24 +0000
Subject: [ARM] pass reboot command line to arch_reset()

OMAP wishes to pass state to the boot loader upon reboot in order to
instruct it whether to wait for USB-based reflashing or not.  There is
already a facility to do this via the reboot() syscall, except we ignore
the string passed to machine_restart().

This patch fixes things to pass this string to arch_reset().  This means
that we keep the reboot mode limited to telling the kernel _how_ to
perform the reboot which should be independent of what we request the
boot loader to do.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/system.h                     |  4 ++--
 arch/arm/kernel/process.c                         | 10 +++++-----
 arch/arm/mach-aaec2000/include/mach/system.h      |  2 +-
 arch/arm/mach-at91/include/mach/system.h          |  2 +-
 arch/arm/mach-clps711x/include/mach/system.h      |  2 +-
 arch/arm/mach-davinci/include/mach/system.h       |  2 +-
 arch/arm/mach-ebsa110/include/mach/system.h       |  2 +-
 arch/arm/mach-ep93xx/include/mach/system.h        |  2 +-
 arch/arm/mach-footbridge/include/mach/system.h    |  2 +-
 arch/arm/mach-h720x/include/mach/system.h         |  2 +-
 arch/arm/mach-imx/include/mach/system.h           |  2 +-
 arch/arm/mach-integrator/include/mach/system.h    |  2 +-
 arch/arm/mach-iop13xx/include/mach/system.h       |  2 +-
 arch/arm/mach-iop32x/include/mach/system.h        |  2 +-
 arch/arm/mach-iop33x/include/mach/system.h        |  2 +-
 arch/arm/mach-ixp2000/include/mach/system.h       |  2 +-
 arch/arm/mach-ixp23xx/include/mach/system.h       |  2 +-
 arch/arm/mach-ixp4xx/include/mach/system.h        |  2 +-
 arch/arm/mach-kirkwood/include/mach/system.h      |  2 +-
 arch/arm/mach-ks8695/include/mach/system.h        |  2 +-
 arch/arm/mach-l7200/include/mach/system.h         |  2 +-
 arch/arm/mach-lh7a40x/include/mach/system.h       |  2 +-
 arch/arm/mach-loki/include/mach/system.h          |  2 +-
 arch/arm/mach-msm/include/mach/system.h           |  2 +-
 arch/arm/mach-mv78xx0/include/mach/system.h       |  2 +-
 arch/arm/mach-mx2/system.c                        |  2 +-
 arch/arm/mach-netx/include/mach/system.h          |  2 +-
 arch/arm/mach-ns9xxx/include/mach/system.h        |  2 +-
 arch/arm/mach-orion5x/include/mach/system.h       |  2 +-
 arch/arm/mach-orion5x/lsmini-setup.c              |  2 +-
 arch/arm/mach-pnx4008/include/mach/system.h       |  2 +-
 arch/arm/mach-pxa/corgi.c                         |  6 +++---
 arch/arm/mach-pxa/include/mach/system.h           |  2 +-
 arch/arm/mach-pxa/mioa701.c                       |  6 +++---
 arch/arm/mach-pxa/poodle.c                        |  6 +++---
 arch/arm/mach-pxa/reset.c                         |  2 +-
 arch/arm/mach-pxa/spitz.c                         |  4 ++--
 arch/arm/mach-pxa/tosa.c                          |  4 ++--
 arch/arm/mach-realview/include/mach/system.h      |  2 +-
 arch/arm/mach-rpc/include/mach/system.h           |  2 +-
 arch/arm/mach-s3c2410/include/mach/system-reset.h |  2 +-
 arch/arm/mach-s3c6400/include/mach/system.h       |  2 +-
 arch/arm/mach-sa1100/include/mach/system.h        |  2 +-
 arch/arm/mach-shark/core.c                        |  2 +-
 arch/arm/mach-shark/include/mach/system.h         |  2 +-
 arch/arm/mach-versatile/include/mach/system.h     |  2 +-
 arch/arm/mach-w90x900/include/mach/system.h       |  2 +-
 arch/arm/plat-mxc/include/mach/system.h           |  2 +-
 arch/arm/plat-omap/include/mach/system.h          |  2 +-
 arch/arm/plat-s3c24xx/cpu.c                       |  6 +++---
 50 files changed, 65 insertions(+), 65 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 811be55f338..0a0d49ae1e6 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -97,8 +97,8 @@ extern void __show_regs(struct pt_regs *);
 extern int cpu_architecture(void);
 extern void cpu_init(void);
 
-void arm_machine_restart(char mode);
-extern void (*arm_pm_restart)(char str);
+void arm_machine_restart(char mode, const char *cmd);
+extern void (*arm_pm_restart)(char str, const char *cmd);
 
 #define UDBG_UNDEFINED	(1 << 0)
 #define UDBG_SYSCALL	(1 << 1)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index af377c73d90..2de14e2afdc 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -83,7 +83,7 @@ static int __init hlt_setup(char *__unused)
 __setup("nohlt", nohlt_setup);
 __setup("hlt", hlt_setup);
 
-void arm_machine_restart(char mode)
+void arm_machine_restart(char mode, const char *cmd)
 {
 	/*
 	 * Clean and disable cache, and turn off interrupts
@@ -100,7 +100,7 @@ void arm_machine_restart(char mode)
 	/*
 	 * Now call the architecture specific reboot code.
 	 */
-	arch_reset(mode);
+	arch_reset(mode, cmd);
 
 	/*
 	 * Whoops - the architecture was unable to reboot.
@@ -120,7 +120,7 @@ EXPORT_SYMBOL(pm_idle);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void (*arm_pm_restart)(char str) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 
@@ -195,9 +195,9 @@ void machine_power_off(void)
 		pm_power_off();
 }
 
-void machine_restart(char * __unused)
+void machine_restart(char *cmd)
 {
-	arm_pm_restart(reboot_mode);
+	arm_pm_restart(reboot_mode, cmd);
 }
 
 void __show_regs(struct pt_regs *regs)
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
index 8f4115d734c..fe08ca1add6 100644
--- a/arch/arm/mach-aaec2000/include/mach/system.h
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index e712658d966..5268af3933c 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -43,7 +43,7 @@ static inline void arch_idle(void)
 
 void (*at91_arch_reset)(void);
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/* call the CPU-specific reset function */
 	if (at91_arch_reset)
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index 24e96159e3e..f916cd7a477 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -32,7 +32,7 @@ static inline void arch_idle(void)
 	mov	r0, r0");
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 17ca41dc2c5..b7e7036674f 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -21,7 +21,7 @@ static void arch_idle(void)
 	cpu_do_idle();
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	davinci_watchdog_reset();
 }
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index 350a028997e..9a26245bf1f 100644
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -34,6 +34,6 @@ static inline void arch_idle(void)
 	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
 }
 
-#define arch_reset(mode)	cpu_reset(0x80000000)
+#define arch_reset(mode, cmd)	cpu_reset(0x80000000)
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index 67789d0f329..ed8f35e4f06 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -9,7 +9,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	u32 devicecfg;
 
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 2db7f36bd6c..0b293156620 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -18,7 +18,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (mode == 's') {
 		/*
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
index e4a7c760d52..a708d24ee46 100644
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -25,7 +25,7 @@ static void arch_idle(void)
 }
 
 
-static __inline__ void arch_reset(char mode)
+static __inline__ void arch_reset(char mode, const char *cmd)
 {
 	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
 }
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
index adee7e51bab..46d4ca91af7 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -32,7 +32,7 @@ arch_idle(void)
 }
 
 static inline void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
index c485345c8c7..e1551b8dab7 100644
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -32,7 +32,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * To reset, we hit the on-board reset register
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index c7127f416e1..d0c66ef450a 100644
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -13,7 +13,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Reset the internal bus (warning both cores are reset)
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index 32d9e5b0a28..a4b808fe0d8 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	local_irq_disable();
 
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index 0cb3ad862ac..f192a34be07 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -14,7 +14,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	*IOP3XX_PCSR = 0x30;
 
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index 2e9c68f95a2..de370992c84 100644
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	local_irq_disable();
 
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index d57c3fc10f1..8920ff2dff1 100644
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -19,7 +19,7 @@ static inline void arch_idle(void)
 #endif
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/* First try machine specific support */
 	if (machine_is_ixdp2351()) {
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 92a7e8ddf69..d2aa26f5acd 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -20,7 +20,7 @@ static inline void arch_idle(void)
 }
 
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if ( 1 && mode == 's') {
 		/* Jump into ROM at address 0 */
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 8510f6cfdab..23a1914c1da 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index 5a9b032bdbe..fb1dda9be2d 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -27,7 +27,7 @@ static void arch_idle(void)
 
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	unsigned int reg;
 
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
index 5272abee0d0..e0dd3b6ae4a 100644
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -19,7 +19,7 @@ static inline void arch_idle(void)
 	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (mode == 's') {
 		cpu_reset(0);
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
index fa46bb1ef07..45a56d3b93d 100644
--- a/arch/arm/mach-lh7a40x/include/mach/system.h
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -13,7 +13,7 @@ static inline void arch_idle(void)
 	cpu_do_idle ();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset (0);
 }
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
index 8db1147d4ec..c1de36fe9b3 100644
--- a/arch/arm/mach-loki/include/mach/system.h
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index f05ad2e0f23..574ccc493da 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -17,7 +17,7 @@
 
 void arch_idle(void);
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	for (;;) ;  /* depends on IPC w/ other core */
 }
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 7d517940883..1d6350b22d0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -17,7 +17,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 7b8269719d1..92c79d4bd16 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -46,7 +46,7 @@ void arch_idle(void)
 /*
  * Reset the system. It is called by machine_restart().
  */
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
 {
 	struct clk *clk;
 
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index 6c1023b8a9a..dc7b4bc003c 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -28,7 +28,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
 	       NETX_SYSTEM_RES_CR);
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
index e2068c57415..1561588ca36 100644
--- a/arch/arm/mach-ns9xxx/include/mach/system.h
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -20,7 +20,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 #ifdef CONFIG_PROCESSOR_NS9360
 	if (processor_is_ns9360())
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 08e43075789..9b8db1dcfa8 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -19,7 +19,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Enable and issue soft reset
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index e0c43b8beb7..c9bf6b81a80 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
 
 static void lsmini_power_off(void)
 {
-	arch_reset(0);
+	arch_reset(0, NULL);
 }
 
 
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index e12e7abfcbc..5dda2bb55f8 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -30,7 +30,7 @@ static void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3b89e5010fb..cdf21dd135b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -635,16 +635,16 @@ static void corgi_poweroff(void)
 		/* Green LED off tells the bootloader to halt */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
 
-	arm_machine_restart('h');
+	arm_machine_restart('h', NULL);
 }
 
-static void corgi_restart(char mode)
+static void corgi_restart(char mode, const char *cmd)
 {
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
 
-	arm_machine_restart('h');
+	arm_machine_restart('h', cmd);
 }
 
 static void __init corgi_init(void)
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index 0a587c4ec70..d1fce8b6d10 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -20,4 +20,4 @@ static inline void arch_idle(void)
 }
 
 
-void arch_reset(char mode);
+void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 025772785d3..97c93a7a285 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -788,13 +788,13 @@ static void mioa701_machine_exit(void);
 static void mioa701_poweroff(void)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s');
+	arm_machine_restart('s', NULL);
 }
 
-static void mioa701_restart(char c)
+static void mioa701_restart(char c, const char *cmd)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s');
+	arm_machine_restart('s', cmd);
 }
 
 struct gpio_ress global_gpios[] = {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 572ddec2b3e..036bbde4d22 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -501,12 +501,12 @@ static struct platform_device *devices[] __initdata = {
 
 static void poodle_poweroff(void)
 {
-	arm_machine_restart('h');
+	arm_machine_restart('h', NULL);
 }
 
-static void poodle_restart(char mode)
+static void poodle_restart(char mode, const char *cmd)
 {
-	arm_machine_restart('h');
+	arm_machine_restart('h', cmd);
 }
 
 static void __init poodle_init(void)
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 867c95c0961..df29d45fb4e 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -81,7 +81,7 @@ static void do_hw_reset(void)
 	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
 }
 
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
 {
 	clear_reset_status(RESET_STATUS_ALL);
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f697c492b2a..7a0a430222c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -701,10 +701,10 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	arm_machine_restart('g');
+	arm_machine_restart('g', NULL);
 }
 
-static void spitz_restart(char mode)
+static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
 	if((MSC0 & 0xffff0000) == 0x7ff00000)
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 66b13802c99..4f6f5024884 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -876,10 +876,10 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	arm_machine_restart('g');
+	arm_machine_restart('g', NULL);
 }
 
-static void tosa_restart(char mode)
+static void tosa_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
 	if((MSC0 & 0xffff0000) == 0x7ff00000)
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index a2f61c78adb..1a15a441e02 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -34,7 +34,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
 	unsigned int val;
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index bd7268ba17e..45c7b935dc4 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	iomd_writeb(0, IOMD_ROMCR0);
 
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 7613d0a384b..b8687f71c30 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -22,7 +22,7 @@
 extern void (*s3c24xx_reset_hook)(void);
 
 static void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
 {
 	struct clk *wdtclk;
 
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 652bbc403f0..090cfd969bc 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -16,7 +16,7 @@ static void arch_idle(void)
 	/* nothing here yet */
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 63755ca5b1b..942b153e251 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -10,7 +10,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (mode == 's') {
 		/* Jump into ROM at address 0 */
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 4f3a2651259..358d875ace1 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -26,7 +26,7 @@
 #define ROMCARD_SIZE            0x08000000
 #define ROMCARD_START           0x10000000
 
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
 {
         short temp;
         local_irq_disable();
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index 0752ca29971..21c373b30bb 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -7,7 +7,7 @@
 #define __ASM_ARCH_SYSTEM_H
 
 /* Found in arch/mach-shark/core.c */
-extern void arch_reset(char mode);
+extern void arch_reset(char mode, const char *cmd);
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index c59e6100c7e..8ffc12a7cb2 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -34,7 +34,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	u32 val;
 
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 93753f92261..94064006685 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -21,7 +21,7 @@ static void arch_idle(void)
 {
 }
 
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index bbfc37465fc..cd03ebaa49b 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -26,7 +26,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	cpu_reset(0);
 }
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index e9b95637f7f..cb8c0ef30fb 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -38,7 +38,7 @@ static inline void omap1_arch_reset(char mode)
 		omap_writew(1, ARM_RSTCT1);
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	if (!cpu_class_is_omap2())
 		omap1_arch_reset(mode);
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 542062f8cbc..1932b7e0da1 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -182,7 +182,7 @@ static unsigned long s3c24xx_read_idcode_v4(void)
  * with the caches enabled. It seems at least the S3C2440 has a problem
  * resetting if there is bus activity interrupted by the reset.
  */
-static void s3c24xx_pm_restart(char mode)
+static void s3c24xx_pm_restart(char mode, const char *cmd)
 {
 	if (mode != 's') {
 		unsigned long flags;
@@ -191,12 +191,12 @@ static void s3c24xx_pm_restart(char mode)
 		__cpuc_flush_kern_all();
 		__cpuc_flush_user_all();
 
-		arch_reset(mode);
+		arch_reset(mode, cmd);
 		local_irq_restore(flags);
 	}
 
 	/* fallback, or unhandled */
-	arm_machine_restart(mode);
+	arm_machine_restart(mode, cmd);
 }
 
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
-- 
cgit v1.2.3


From 615e73b3cd8876262f61ea28b4147c8de38a043a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 19 Mar 2009 10:04:29 +0000
Subject: sh: disallow kexec virtual entry

Older versions of kexec-tools has a zImage loader that
passes a virtual address as entry point. The elf loader
otoh it passes a physical address as entry point, and
pages are always passed as physical addresses as well.

Only allow physical addresses from now on.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machine_kexec.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index cc7c29b0dc8..7ea2704ea03 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -46,6 +46,12 @@ void machine_crash_shutdown(struct pt_regs *regs)
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+	/* older versions of kexec-tools are passing
+	 * the zImage entry point as a virtual address.
+	 */
+	if (image->start != PHYSADDR(image->start))
+		return -EINVAL; /* upgrade your kexec-tools */
+
 	return 0;
 }
 
@@ -125,7 +131,8 @@ void machine_kexec(struct kimage *image)
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, image->start);
+	(*rnk)(page_list, reboot_code_buffer,
+	       (unsigned long)phys_to_virt(image->start));
 
 #ifdef CONFIG_KEXEC_JUMP
 	asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
-- 
cgit v1.2.3


From 3bf509230a626d11cba0e0145f552918092f586d Mon Sep 17 00:00:00 2001
From: Rafael Ignacio Zurita <rizurita@yahoo.com>
Date: Fri, 20 Mar 2009 02:08:22 +0000
Subject: sh: fix the HD64461 level-triggered interrupts handling

Rework the hd64461 demuxer code to fix the HD64461 level-triggered
interrupts handling, using handle_level_irq() as needed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-hp6xx/setup.c |  1 -
 arch/sh/cchips/hd6446x/hd64461.c  | 30 +++++++++++++++++-------------
 arch/sh/include/asm/hd64461.h     |  1 -
 3 files changed, 17 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 746742bdc01..8f305b36358 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -115,7 +115,6 @@ static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_setup = hp6xx_setup,
 	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-	.mv_irq_demux = hd64461_irq_demux,
 	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
 	.mv_init_irq = hp6xx_init_irq,
 };
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
index 27ceeb948bb..25ef9106152 100644
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ b/arch/sh/cchips/hd6446x/hd64461.c
@@ -53,21 +53,22 @@ static struct irq_chip hd64461_irq_chip = {
 	.unmask		= hd64461_unmask_irq,
 };
 
-int hd64461_irq_demux(int irq)
+static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	if (irq == CONFIG_HD64461_IRQ) {
-		unsigned short bit;
-		unsigned short nirr = inw(HD64461_NIRR);
-		unsigned short nimr = inw(HD64461_NIMR);
-		int i;
-
-		nirr &= ~nimr;
-		for (bit = 1, i = 0; i < 16; bit <<= 1, i++)
-			if (nirr & bit)
-				break;
-		irq = HD64461_IRQBASE + i;
+	unsigned short intv = ctrl_inw(HD64461_NIRR);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = HD64461_IRQBASE;
+
+	intv &= (1 << HD64461_IRQ_NUM) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
 	}
-	return irq;
 }
 
 int __init setup_hd64461(void)
@@ -93,6 +94,9 @@ int __init setup_hd64461(void)
 		set_irq_chip_and_handler(i, &hd64461_irq_chip,
 					 handle_level_irq);
 
+	set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
+	set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 #ifdef CONFIG_HD64461_ENABLER
 	printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
 	__raw_writeb(0x4c, HD64461_PCC1CSCIER);
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
index 8c1353baf00..52b4b623827 100644
--- a/arch/sh/include/asm/hd64461.h
+++ b/arch/sh/include/asm/hd64461.h
@@ -242,7 +242,6 @@
 #include <asm/io_generic.h>
 
 /* arch/sh/cchips/hd6446x/hd64461/setup.c */
-int hd64461_irq_demux(int irq);
 void hd64461_register_irq_demux(int irq,
 				int (*demux) (int irq, void *dev), void *dev);
 void hd64461_unregister_irq_demux(int irq);
-- 
cgit v1.2.3


From eaeed5d31d8ded02fa0a4b608f57418cc0e65b07 Mon Sep 17 00:00:00 2001
From: Steve Glendinning <steve.glendinning@smsc.com>
Date: Fri, 20 Mar 2009 14:16:29 +0000
Subject: sh: add support for SMSC Polaris platform

Polaris is an SMSC reference platform with a SH7709S CPU and LAN9118
ethernet controller.  This patch adds support for it.

Updated following feedback from Nobuhiro Iwamatsu.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig            |   7 +
 arch/sh/boards/Makefile           |   1 +
 arch/sh/boards/board-polaris.c    | 149 ++++++
 arch/sh/configs/polaris_defconfig | 969 ++++++++++++++++++++++++++++++++++++++
 arch/sh/tools/mach-types          |   1 +
 5 files changed, 1127 insertions(+)
 create mode 100644 arch/sh/boards/board-polaris.c
 create mode 100644 arch/sh/configs/polaris_defconfig

(limited to 'arch')

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 48c043bf45c..dcc1af8a2cf 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -261,6 +261,13 @@ config SH_CAYMAN
 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
 	select SYS_SUPPORTS_PCI
 
+config SH_POLARIS
+	bool "SMSC Polaris"
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select if configuring for an SMSC Polaris development board
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index d0daebce8b3..7baa2109023 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
+obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
new file mode 100644
index 00000000000..62607eb5100
--- /dev/null
+++ b/arch/sh/boards/board-polaris.c
@@ -0,0 +1,149 @@
+/*
+ * June 2006 steve.glendinning@smsc.com
+ *
+ * Polaris-specific resource declaration
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <cpu/gpio.h>
+#include <mach-se/mach/se.h>
+
+#define BCR2		(0xFFFFFF62)
+#define WCR2		(0xFFFFFF66)
+#define AREA5_WAIT_CTRL	(0x1C00)
+#define WAIT_STATES_10	(0x7)
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= PA_EXT5,
+		.end		= PA_EXT5 + 0x1fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= IRQ0_IRQ,
+		.end		= IRQ0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 8,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PORT_PCDR,
+		.end	= PORT_PCDR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *polaris_devices[] __initdata = {
+	&smsc911x_device,
+	&heartbeat_device,
+};
+
+static int __init polaris_initialise(void)
+{
+	u16 wcr, bcr_mask;
+
+	printk(KERN_INFO "Configuring Polaris external bus\n");
+
+	/* Configure area 5 with 2 wait states */
+	wcr = ctrl_inw(WCR2);
+	wcr &= (~AREA5_WAIT_CTRL);
+	wcr |= (WAIT_STATES_10 << 10);
+	ctrl_outw(wcr, WCR2);
+
+	/* Configure area 5 for 32-bit access */
+	bcr_mask = ctrl_inw(BCR2);
+	bcr_mask |= 1 << 10;
+	ctrl_outw(bcr_mask, BCR2);
+
+	return platform_add_devices(polaris_devices,
+				    ARRAY_SIZE(polaris_devices));
+}
+arch_initcall(polaris_initialise);
+
+static struct ipr_data ipr_irq_table[] = {
+	/* External IRQs */
+	{ IRQ0_IRQ, 0,  0,  1, },	/* IRQ0 */
+	{ IRQ1_IRQ, 0,  4,  1, },	/* IRQ1 */
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "sh7709-ext",
+	},
+};
+
+static void __init init_polaris_irq(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
+
+static struct sh_machine_vector mv_polaris __initmv = {
+	.mv_name		= "Polaris",
+	.mv_nr_irqs		= 61,
+	.mv_init_irq		= init_polaris_irq,
+};
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
new file mode 100644
index 00000000000..320def233b2
--- /dev/null
+++ b/arch/sh/configs/polaris_defconfig
@@ -0,0 +1,969 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Wed Feb 11 18:41:59 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+CONFIG_CPU_SUBTYPE_SH7709=y
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU_EMU=y
+CONFIG_SH_ADC=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_HP6XX is not set
+CONFIG_SH_POLARIS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33000000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_COMPAT=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 4932705603b..8477b5d884f 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -54,3 +54,4 @@ SH7763RDP		SH_SH7763RDP
 SH7785LCR		SH_SH7785LCR
 URQUELL			SH_URQUELL
 ESPT			SH_ESPT
+POLARIS			SH_POLARIS
-- 
cgit v1.2.3


From 4731f8b66dd34ebf0e67ca6ba9162b0e509bec06 Mon Sep 17 00:00:00 2001
From: Daniel Silverstone <dsilvers@simtec.co.uk>
Date: Fri, 20 Mar 2009 11:11:43 +0100
Subject: [ARM] 5428/1: Module relocation update for R_ARM_V4BX

It would seem when building kernel modules with modern binutils
(required by modern GCC) for ARM v4T targets (specifically observed
with the Samsung 24xx SoC which is an 920T) R_ARM_V4BX relocations
are emitted for function epilogues.

This manifests at module load time with an "unknown relocation: 40"
error message.

The following patch adds the R_ARM_V4BX relocation to the ARM kernel
module loader. The relocation operation is taken from that within the
binutils bfd library.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/elf.h | 1 +
 arch/arm/kernel/module.c   | 9 +++++++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a58378c343b..ce3b36e9df8 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_ABS32	2
 #define R_ARM_CALL	28
 #define R_ARM_JUMP24	29
+#define R_ARM_V4BX	40
 
 /*
  * These are used to set parameters in the core dumps.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index dab48f27263..9f509fd00fd 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -132,6 +132,15 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc |= offset & 0x00ffffff;
 			break;
 
+	       case R_ARM_V4BX:
+		       /* Preserve Rm and the condition code. Alter
+			* other bits to re-code instruction as
+			* MOV PC,Rm.
+			*/
+		       *(u32 *)loc &= 0xf000000f;
+		       *(u32 *)loc |= 0x01a0f000;
+		       break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
-- 
cgit v1.2.3


From 949abe574739848b1e68271fbac86c3cb4506aad Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Sat, 21 Mar 2009 21:12:19 +0800
Subject: crypto: sha512-s390 - Add missing block size

I missed the block size when converting sha512-s390 to shash.

Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha512_s390.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index 420acf41b72..83192bfc804 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -84,6 +84,7 @@ static struct shash_alg sha384_alg = {
 		.cra_driver_name=	"sha384-s390",
 		.cra_priority	=	CRYPT_S390_PRIORITY,
 		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA384_BLOCK_SIZE,
 		.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
 		.cra_module	=	THIS_MODULE,
 	}
-- 
cgit v1.2.3


From e84665c9cb4db963393fafad6fefe5efdd7e4a09 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 20 Mar 2009 09:52:09 +0000
Subject: dsa: add switch chip cascading support

The initial version of the DSA driver only supported a single switch
chip per network interface, while DSA-capable switch chips can be
interconnected to form a tree of switch chips.  This patch adds support
for multiple switch chips on a network interface.

An example topology for a 16-port device with an embedded CPU is as
follows:

	+-----+          +--------+       +--------+
	|     |eth0    10| switch |9    10| switch |
	| CPU +----------+        +-------+        |
	|     |          | chip 0 |       | chip 1 |
	+-----+          +---++---+       +---++---+
	                     ||               ||
	                     ||               ||
	                     ||1000baseT      ||1000baseT
	                     ||ports 1-8      ||ports 9-16

This requires a couple of interdependent changes in the DSA layer:

- The dsa platform driver data needs to be extended: there is still
  only one netdevice per DSA driver instance (eth0 in the example
  above), but each of the switch chips in the tree needs its own
  mii_bus device pointer, MII management bus address, and port name
  array. (include/net/dsa.h)  The existing in-tree dsa users need
  some small changes to deal with this. (arch/arm)

- The DSA and Ethertype DSA tagging modules need to be extended to
  use the DSA device ID field on receive and demultiplex the packet
  accordingly, and fill in the DSA device ID field on transmit
  according to which switch chip the packet is heading to.
  (net/dsa/tag_{dsa,edsa}.c)

- The concept of "CPU port", which is the switch chip port that the
  CPU is connected to (port 10 on switch chip 0 in the example), needs
  to be extended with the concept of "upstream port", which is the
  port on the switch chip that will bring us one hop closer to the CPU
  (port 10 for both switch chips in the example above).

- The dsa platform data needs to specify which ports on which switch
  chips are links to other switch chips, so that we can enable DSA
  tagging mode on them.  (For inter-switch links, we always use
  non-EtherType DSA tagging, since it has lower overhead.  The CPU
  link uses dsa or edsa tagging depending on what the 'root' switch
  chip supports.)  This is done by specifying "dsa" for the given
  port in the port array.

- The dsa platform data needs to be extended with information on via
  which port to reach any given switch chip from any given switch chip.
  This info is specified via the per-switch chip data struct ->rtable[]
  array, which gives the nexthop ports for each of the other switches
  in the tree.

For the example topology above, the dsa platform data would look
something like this:

	static struct dsa_chip_data sw[2] = {
		{
			.mii_bus	= &foo,
			.sw_addr	= 1,
			.port_names[0]	= "p1",
			.port_names[1]	= "p2",
			.port_names[2]	= "p3",
			.port_names[3]	= "p4",
			.port_names[4]	= "p5",
			.port_names[5]	= "p6",
			.port_names[6]	= "p7",
			.port_names[7]	= "p8",
			.port_names[9]	= "dsa",
			.port_names[10]	= "cpu",
			.rtable		= (s8 []){ -1, 9, },
		}, {
			.mii_bus	= &foo,
			.sw_addr	= 2,
			.port_names[0]	= "p9",
			.port_names[1]	= "p10",
			.port_names[2]	= "p11",
			.port_names[3]	= "p12",
			.port_names[4]	= "p13",
			.port_names[5]	= "p14",
			.port_names[6]	= "p15",
			.port_names[7]	= "p16",
			.port_names[10]	= "dsa",
			.rtable		= (s8 []){ 10, -1, },
		},
	},

	static struct dsa_platform_data pd = {
		.netdev		= &foo,
		.nr_switches	= 2,
		.sw		= sw,
	};

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-kirkwood/common.c              |  5 ++++-
 arch/arm/mach-kirkwood/rd88f6281-setup.c     | 13 +++++++++----
 arch/arm/mach-orion5x/common.c               |  5 ++++-
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |  9 +++++++--
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c  | 10 ++++++++--
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 10 ++++++++--
 arch/arm/mach-orion5x/wrt350n-v2-setup.c     |  9 +++++++--
 7 files changed, 47 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b3404b7775b..0d2074f51a5 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -231,14 +231,17 @@ static struct platform_device kirkwood_switch_device = {
 
 void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 {
+	int i;
+
 	if (irq != NO_IRQ) {
 		kirkwood_switch_resources[0].start = irq;
 		kirkwood_switch_resources[0].end = irq;
 		kirkwood_switch_device.num_resources = 1;
 	}
 
-	d->mii_bus = &kirkwood_ge00_shared.dev;
 	d->netdev = &kirkwood_ge00.dev;
+	for (i = 0; i < d->nr_chips; i++)
+		d->chip[i].mii_bus = &kirkwood_ge00_shared.dev;
 	kirkwood_switch_device.dev.platform_data = d;
 
 	platform_device_register(&kirkwood_switch_device);
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9a0e905d10c..e1c0516c4df 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -75,7 +75,7 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f6281_switch_data = {
+static struct dsa_chip_data rd88f6281_switch_chip_data = {
 	.port_names[0]	= "lan1",
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
@@ -83,6 +83,11 @@ static struct dsa_platform_data rd88f6281_switch_data = {
 	.port_names[5]	= "cpu",
 };
 
+static struct dsa_platform_data rd88f6281_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f6281_switch_chip_data,
+};
+
 static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
 };
@@ -105,12 +110,12 @@ static void __init rd88f6281_init(void)
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
 	kirkwood_pcie_id(&dev, &rev);
 	if (rev == MV88F6281_REV_A0) {
-		rd88f6281_switch_data.sw_addr = 10;
+		rd88f6281_switch_chip_data.sw_addr = 10;
 		kirkwood_ge01_init(&rd88f6281_ge01_data);
 	} else {
-		rd88f6281_switch_data.port_names[4] = "wan";
+		rd88f6281_switch_chip_data.port_names[4] = "wan";
 	}
-	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+	kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
 
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0a623379789..a4ecf625981 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -219,14 +219,17 @@ static struct platform_device orion5x_switch_device = {
 
 void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
 {
+	int i;
+
 	if (irq != NO_IRQ) {
 		orion5x_switch_resources[0].start = irq;
 		orion5x_switch_resources[0].end = irq;
 		orion5x_switch_device.num_resources = 1;
 	}
 
-	d->mii_bus = &orion5x_eth_shared.dev;
 	d->netdev = &orion5x_eth.dev;
+	for (i = 0; i < d->nr_chips; i++)
+		d->chip[i].mii_bus = &orion5x_eth_shared.dev;
 	orion5x_switch_device.dev.platform_data = d;
 
 	platform_device_register(&orion5x_switch_device);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 15f53235ee3..9c1ca41730b 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -94,7 +94,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
 	.port_names[0]	= "lan2",
 	.port_names[1]	= "lan1",
 	.port_names[2]	= "wan",
@@ -103,6 +103,11 @@ static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
 	.port_names[7]	= "lan3",
 };
 
+static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f5181l_fxo_switch_chip_data,
+};
+
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -117,7 +122,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 8ad3934399d..ee1399ff0ce 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -95,7 +95,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
 	.port_names[0]	= "lan2",
 	.port_names[1]	= "lan1",
 	.port_names[2]	= "wan",
@@ -104,6 +104,11 @@ static struct dsa_platform_data rd88f5181l_ge_switch_data = {
 	.port_names[7]	= "lan3",
 };
 
+static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f5181l_ge_switch_chip_data,
+};
+
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -122,7 +127,8 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
+				gpio_to_irq(8));
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 262e25e4dac..7737cf9a8f5 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -35,7 +35,7 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
 	.port_names[0]	= "lan1",
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
@@ -44,6 +44,11 @@ static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
 	.port_names[5]	= "cpu",
 };
 
+static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f6183ap_ge_switch_chip_data,
+};
+
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@@ -89,7 +94,8 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
+				gpio_to_irq(3));
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index cc8f8920086..1b4ad9d5e2e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -106,7 +106,7 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data wrt350n_v2_switch_data = {
+static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
 	.port_names[0]	= "lan2",
 	.port_names[1]	= "lan1",
 	.port_names[2]	= "wan",
@@ -115,6 +115,11 @@ static struct dsa_platform_data wrt350n_v2_switch_data = {
 	.port_names[7]	= "lan4",
 };
 
+static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &wrt350n_v2_switch_chip_data,
+};
+
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -129,7 +134,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
-- 
cgit v1.2.3


From 1efb71809fd47bc19b3ce05080e1d5085a8dfab1 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 19 Mar 2009 15:45:19 +0100
Subject: [ARM] pxa: add pxa320 missing pin function for CS2 on GPIO3

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/mfp-pxa320.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 67f8385ea54..80a0da9e092 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -38,6 +38,7 @@
 #define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
 
 /* Chip Select */
+#define GPIO3_nCS2		MFP_CFG(GPIO3, AF1)
 #define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
 
 /* AC97 */
-- 
cgit v1.2.3


From 5c0dbb8fc2b36619684cbb7486491ecac950a595 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 16:37:08 +0100
Subject: [ARM] pxa: rename colibri.c to colibri-pxa270.c

Namespace cleanup: rename colibri.c to colibri-pxa270.c and change
some names in colibri.h.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig                |   2 +-
 arch/arm/mach-pxa/Makefile               |   2 +-
 arch/arm/mach-pxa/colibri-pxa270.c       | 145 +++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri.c              | 137 -----------------------------
 arch/arm/mach-pxa/include/mach/colibri.h |  17 ++--
 5 files changed, 153 insertions(+), 150 deletions(-)
 create mode 100644 arch/arm/mach-pxa/colibri-pxa270.c
 delete mode 100644 arch/arm/mach-pxa/colibri.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d13282d773a..fd21bba6217 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -262,7 +262,7 @@ config MACH_EXEDA
 	select PXA27x
 
 config MACH_COLIBRI
-	bool "Toradex Colibri PX27x"
+	bool "Toradex Colibri PXA270"
 	select PXA27x
 
 config MACH_ZYLONITE
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 8da8e63d048..fbbda93b73a 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
+obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
new file mode 100644
index 00000000000..01bcfaae75b
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -0,0 +1,145 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270.c
+ *
+ *  Support for Toradex PXA270 based Colibri module
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * GPIO configuration
+ */
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition colibri_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00040000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Kernel",
+		.offset =	0x00040000,
+		.size =		0x00400000,
+		.mask_flags =	0
+	}, {
+		.name =		"Rootfs",
+		.offset =	0x00440000,
+		.size =		MTDPART_SIZ_FULL,
+		.mask_flags =	0
+	}
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+	{
+		.width		= 4,			/* bankwidth in bytes */
+		.parts		= colibri_partitions,
+		.nr_parts	= ARRAY_SIZE(colibri_partitions)
+	}
+};
+
+static struct resource colibri_pxa270_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device colibri_pxa270_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = colibri_flash_data,
+	},
+	.resource = &colibri_pxa270_flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * DM9000 Ethernet
+ */
+#if defined(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= COLIBRI_PXA270_ETH_PHYS,
+		.end	= COLIBRI_PXA270_ETH_PHYS + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= COLIBRI_PXA270_ETH_PHYS + 4,
+		.end	= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= COLIBRI_PXA270_ETH_IRQ,
+		.end	= COLIBRI_PXA270_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif /* CONFIG_DM9000 */
+
+static struct platform_device *colibri_pxa270_devices[] __initdata = {
+	&colibri_pxa270_flash_device,
+#if defined(CONFIG_DM9000)
+	&dm9000_device,
+#endif
+};
+
+static void __init colibri_pxa270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_pxa270_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
deleted file mode 100644
index 26493ae2889..00000000000
--- a/arch/arm/mach-pxa/colibri.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/colibri.c
- *
- *  Support for Toradex PXA27x based Colibri module
- *  Daniel Mack <daniel@caiaq.de>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long colibri_pin_config[] __initdata = {
-	GPIO78_nCS_2,	/* Ethernet CS */
-	GPIO114_GPIO,	/* Ethernet IRQ */
-};
-
-/*
- * Flash
- */
-static struct mtd_partition colibri_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Kernel",
-		.offset =	0x00040000,
-		.size =		0x00400000,
-		.mask_flags =	0
-	}, {
-		.name =		"Rootfs",
-		.offset =	0x00440000,
-		.size =		MTDPART_SIZ_FULL,
-		.mask_flags =	0
-	}
-};
-
-static struct physmap_flash_data colibri_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= colibri_partitions,
-		.nr_parts	= ARRAY_SIZE(colibri_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = colibri_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * DM9000 Ethernet
- */
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= COLIBRI_ETH_PHYS,
-		.end	= COLIBRI_ETH_PHYS + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= COLIBRI_ETH_PHYS + 4,
-		.end	= COLIBRI_ETH_PHYS + 4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= COLIBRI_ETH_IRQ,
-		.end	= COLIBRI_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-
-static struct platform_device *colibri_devices[] __initdata = {
-	&flash_device,
-	&dm9000_device,
-};
-
-static void __init colibri_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
-
-	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
-}
-
-MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
-	.init_machine	= colibri_init,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 2ae373fb567..c7c99d07881 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -2,18 +2,13 @@
 #define _COLIBRI_H_
 
 /* physical memory regions */
-#define COLIBRI_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-/* virtual memory regions */
-#define COLIBRI_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-/* size of flash */
-#define COLIBRI_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		114
-#define COLIBRI_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+#define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
+#define COLIBRI_PXA270_ETH_IRQ_GPIO	114
+#define COLIBRI_PXA270_ETH_IRQ		\
+	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
 
 #endif /* _COLIBRI_H_ */
+
-- 
cgit v1.2.3


From 5fc9f9a1deefc9999af721fba249cd58ee7e273b Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 16:37:09 +0100
Subject: [ARM] pxa: add basic support for Colibri PXA300 module

This patch add basic support for Toradex' Colibri PXA300 module.
Ethernet is enabled conditionally, depdending on CONFIG_AX88796.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig                |  5 ++
 arch/arm/mach-pxa/Makefile               |  1 +
 arch/arm/mach-pxa/colibri-pxa300.c       | 99 ++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h | 17 ++++++
 4 files changed, 122 insertions(+)
 create mode 100644 arch/arm/mach-pxa/colibri-pxa300.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index fd21bba6217..1a93888c68a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -265,6 +265,11 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
+config MACH_COLIBRI300
+	bool "Toradex Colibri PXA300"
+	select PXA3xx
+	select CPU_PXA300
+
 config MACH_ZYLONITE
 	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index fbbda93b73a..df6534b49e3 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa300.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
new file mode 100644
index 00000000000..b271e028da3
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -0,0 +1,99 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa300.c
+ *
+ *  Support for Toradex PXA300 based Colibri module
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa300.h>
+#include <mach/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * GPIO configuration
+ */
+static mfp_cfg_t colibri_pxa300_pin_config[] __initdata = {
+	GPIO1_nCS2,			/* AX88796 chip select */
+	GPIO26_GPIO | MFP_PULL_HIGH,	/* AX88796 IRQ */
+};
+
+#if defined(CONFIG_AX88796)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2,
+	.dcr_val	= 0x01,
+	.rcr_val	= 0x0e,
+	.gpoc_val	= 0x19
+};
+
+static struct resource colibri_asix_resource[] = {
+	[0] = {
+		.start = PXA3xx_CS2_PHYS,
+		.end   = PXA3xx_CS2_PHYS + (0x18 * 0x2) - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA3xx_CS2_PHYS + (1 << 11),
+		.end   = PXA3xx_CS2_PHYS + (1 << 11) + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = COLIBRI_PXA300_ETH_IRQ,
+		.end   = COLIBRI_PXA300_ETH_IRQ,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device asix_device = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
+	.resource	= colibri_asix_resource,
+	.dev		= {
+		.platform_data = &colibri_asix_platdata
+	}
+};
+#endif /* CONFIG_AX88796 */
+
+static struct platform_device *colibri_pxa300_devices[] __initdata = {
+#if defined(CONFIG_AX88796)
+	&asix_device
+#endif
+};
+
+static void __init colibri_pxa300_init(void)
+{
+	set_irq_type(COLIBRI_PXA300_ETH_IRQ, IRQ_TYPE_EDGE_FALLING);
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_pin_config));
+	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa300_devices));
+}
+
+MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_pxa300_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index c7c99d07881..e295e8df8d6 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,14 +1,31 @@
 #ifndef _COLIBRI_H_
 #define _COLIBRI_H_
+/*
+ * common settings for all modules
+ */
 
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
+/* definitions for Colibri PXA270 */
+
 #define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
 #define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
 #define COLIBRI_PXA270_ETH_IRQ_GPIO	114
 #define COLIBRI_PXA270_ETH_IRQ		\
 	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
 
+/* definitions for Colibri PXA300 */
+
+#define COLIBRI_PXA300_ETH_IRQ_GPIO     26
+#define COLIBRI_PXA300_ETH_IRQ          \
+	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA300_ETH_IRQ_GPIO))
+
+/* definitions for Colibri PXA320 */
+
+#define COLIBRI_PXA320_ETH_IRQ_GPIO     36
+#define COLIBRI_PXA320_ETH_IRQ          \
+	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA320_ETH_IRQ_GPIO))
+
 #endif /* _COLIBRI_H_ */
 
-- 
cgit v1.2.3


From ebc046c2a3544ba4f55512a218a4084522473bcd Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 16:37:10 +0100
Subject: [ARM] pxa: add MMC support for Colibri PXA300

Added MMC support for Toradex' Colibri PXA300 module.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c | 58 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index b271e028da3..7cc4249c770 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -21,6 +21,7 @@
 
 #include <mach/pxa300.h>
 #include <mach/colibri.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -31,6 +32,15 @@
 static mfp_cfg_t colibri_pxa300_pin_config[] __initdata = {
 	GPIO1_nCS2,			/* AX88796 chip select */
 	GPIO26_GPIO | MFP_PULL_HIGH,	/* AX88796 IRQ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+	GPIO7_MMC1_CLK,
+	GPIO14_MMC1_CMD,
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+#endif
 };
 
 #if defined(CONFIG_AX88796)
@@ -80,11 +90,59 @@ static struct platform_device *colibri_pxa300_devices[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+#define MMC_DETECT_PIN   mfp_to_gpio(MFP_PIN_GPIO13)
+
+static int colibri_pxa300_mci_init(struct device *dev,
+				   irq_handler_t colibri_mmc_detect_int,
+				   void *data)
+{
+	int ret;
+
+	ret = gpio_request(MMC_DETECT_PIN, "mmc card detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(MMC_DETECT_PIN);
+	ret = request_irq(gpio_to_irq(MMC_DETECT_PIN), colibri_mmc_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (ret) {
+		gpio_free(MMC_DETECT_PIN);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void colibri_pxa300_mci_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_DETECT_PIN, data);
+	gpio_free(gpio_to_irq(MMC_DETECT_PIN));
+}
+
+static struct pxamci_platform_data colibri_pxa300_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init		= colibri_pxa300_mci_init,
+	.exit		= colibri_pxa300_mci_exit,
+};
+
+static void __init colibri_pxa300_init_mmc(void)
+{
+	pxa_set_mci_info(&colibri_pxa300_mci_platform_data);
+}
+
+#else
+static inline void colibri_pxa300_init_mmc(void) {}
+#endif /* CONFIG_MMC_PXA */
+
 static void __init colibri_pxa300_init(void)
 {
 	set_irq_type(COLIBRI_PXA300_ETH_IRQ, IRQ_TYPE_EDGE_FALLING);
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_pin_config));
 	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa300_devices));
+	colibri_pxa300_init_mmc();
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-- 
cgit v1.2.3


From 42e07ad7fc111bde5cd6c0e5bd7085b4cecf96b7 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 16:37:11 +0100
Subject: [ARM] pxa: add USB support for Colibri PXA300

This adds support for USB OHCI for Toradex' Colibri PXA300 modules as
connected on the evaluation board.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 7cc4249c770..f1f24869c03 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -22,6 +22,7 @@
 #include <mach/pxa300.h>
 #include <mach/colibri.h>
 #include <mach/mmc.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -41,6 +42,11 @@ static mfp_cfg_t colibri_pxa300_pin_config[] __initdata = {
 	GPIO5_MMC1_DAT2,
 	GPIO6_MMC1_DAT3,
 #endif
+
+#if defined (CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+        GPIO0_2_USBH_PEN,
+        GPIO1_2_USBH_PWR,
+#endif
 };
 
 #if defined(CONFIG_AX88796)
@@ -137,12 +143,27 @@ static void __init colibri_pxa300_init_mmc(void)
 static inline void colibri_pxa300_init_mmc(void) {}
 #endif /* CONFIG_MMC_PXA */
 
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
+	.port_mode	= PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init colibri_pxa300_init_ohci(void)
+{
+	pxa_set_ohci_info(&colibri_pxa300_ohci_info);
+}
+#else
+static inline void colibri_pxa300_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
 static void __init colibri_pxa300_init(void)
 {
 	set_irq_type(COLIBRI_PXA300_ETH_IRQ, IRQ_TYPE_EDGE_FALLING);
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_pin_config));
 	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa300_devices));
 	colibri_pxa300_init_mmc();
+	colibri_pxa300_init_ohci();
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-- 
cgit v1.2.3


From b1701f1e09f8de37d3ab1c5452909632279d1972 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 16:37:12 +0100
Subject: [ARM] pxa: rename and update Colibri PXA270 defconfig

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/colibri_defconfig        | 1481 ------------------------
 arch/arm/configs/colibri_pxa270_defconfig | 1737 +++++++++++++++++++++++++++++
 2 files changed, 1737 insertions(+), 1481 deletions(-)
 delete mode 100644 arch/arm/configs/colibri_defconfig
 create mode 100644 arch/arm/configs/colibri_pxa270_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
deleted file mode 100644
index 744086fff41..00000000000
--- a/arch/arm/configs/colibri_defconfig
+++ /dev/null
@@ -1,1481 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec  3 13:36:09 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-CONFIG_CFG80211=y
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_ZD1211RW is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
new file mode 100644
index 00000000000..4cf3bde1c52
--- /dev/null
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -0,0 +1,1737 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:18:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=y
+CONFIG_LIB80211_CRYPT_CCMP=y
+CONFIG_LIB80211_CRYPT_TKIP=y
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=y
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_APPLE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8583=m
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 71d361551265d90c8ab1dcdb223a15568d0026b3 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 13 Mar 2009 16:37:13 +0100
Subject: [ARM] pxa: add colibri PXA300 defconfig

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/colibri_pxa300_defconfig | 1156 +++++++++++++++++++++++++++++
 1 file changed, 1156 insertions(+)
 create mode 100644 arch/arm/configs/colibri_pxa300_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
new file mode 100644
index 00000000000..4774a36fa74
--- /dev/null
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -0,0 +1,1156 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:13:20 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+CONFIG_MACH_COLIBRI300=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_AX88796=y
+# CONFIG_AX88796_93CX6 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 626806d96fcfe355af5e1d299f651c774f68ead0 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 23 Mar 2009 02:04:16 +0100
Subject: [ARM] pxa: Fix Colibri AX88796 configuration

Broaden the AX88796 register mask to allow access to the reset register.
Remove unnecessary value definitions and the second resource block.

Diagnosed-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index f1f24869c03..a5c1f72d88c 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -55,24 +55,16 @@ static mfp_cfg_t colibri_pxa300_pin_config[] __initdata = {
  */
 static struct ax_plat_data colibri_asix_platdata = {
 	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x01,
-	.rcr_val	= 0x0e,
-	.gpoc_val	= 0x19
+	.wordlength	= 2
 };
 
 static struct resource colibri_asix_resource[] = {
 	[0] = {
 		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x18 * 0x2) - 1,
+		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = PXA3xx_CS2_PHYS + (1 << 11),
-		.end   = PXA3xx_CS2_PHYS + (1 << 11) + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
 		.start = COLIBRI_PXA300_ETH_IRQ,
 		.end   = COLIBRI_PXA300_ETH_IRQ,
 		.flags = IORESOURCE_IRQ
-- 
cgit v1.2.3


From acb3655973de30cb74549986e5e118a374967702 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 23 Mar 2009 02:04:17 +0100
Subject: [ARM] pxa: Refactor Colibri board support code

- Move common function for all Colibri PXA3xx boards to the newly
  added colibri-pxa3xx.c
- Drop some unnecessary defines from colibri.h
- Make Kconfig reflect the fact that code for colibri 300 module does
  also work for the 310 model
- Give up on the huge pin config table which was messed up with lots of
  #ifdefs and switch over to locally defined tables for configured
  functions

Cc: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig                |   2 +-
 arch/arm/mach-pxa/Makefile               |   2 +-
 arch/arm/mach-pxa/colibri-pxa300.c       | 116 ++++++++++---------------------
 arch/arm/mach-pxa/colibri-pxa3xx.c       |  75 ++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |  18 ++---
 5 files changed, 119 insertions(+), 94 deletions(-)
 create mode 100644 arch/arm/mach-pxa/colibri-pxa3xx.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 1a93888c68a..142fd59a40b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -266,7 +266,7 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300"
+	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
 	select CPU_PXA300
 
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index df6534b49e3..772569383b3 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa300.o
+obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a5c1f72d88c..14ef9bf094f 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -1,8 +1,10 @@
 /*
  *  arch/arm/mach-pxa/colibri-pxa300.c
  *
- *  Support for Toradex PXA300 based Colibri module
+ *  Support for Toradex PXA300/310 based Colibri module
+ *
  *  Daniel Mack <daniel@caiaq.de>
+ *  Matthias Meier <matthias.j.meier@gmx.net>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -16,40 +18,19 @@
 #include <net/ax88796.h>
 
 #include <asm/mach-types.h>
+#include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
 #include <mach/pxa300.h>
 #include <mach/colibri.h>
-#include <mach/mmc.h>
 #include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
 
-/*
- * GPIO configuration
- */
-static mfp_cfg_t colibri_pxa300_pin_config[] __initdata = {
-	GPIO1_nCS2,			/* AX88796 chip select */
-	GPIO26_GPIO | MFP_PULL_HIGH,	/* AX88796 IRQ */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-#endif
-
-#if defined (CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-        GPIO0_2_USBH_PEN,
-        GPIO1_2_USBH_PWR,
-#endif
-};
-
 #if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
 /*
  * Asix AX88796 Ethernet
  */
@@ -65,8 +46,8 @@ static struct resource colibri_asix_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = COLIBRI_PXA300_ETH_IRQ,
-		.end   = COLIBRI_PXA300_ETH_IRQ,
+		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ
 	}
 };
@@ -80,82 +61,57 @@ static struct platform_device asix_device = {
 		.platform_data = &colibri_asix_platdata
 	}
 };
-#endif /* CONFIG_AX88796 */
-
-static struct platform_device *colibri_pxa300_devices[] __initdata = {
-#if defined(CONFIG_AX88796)
-	&asix_device
-#endif
-};
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-#define MMC_DETECT_PIN   mfp_to_gpio(MFP_PIN_GPIO13)
-
-static int colibri_pxa300_mci_init(struct device *dev,
-				   irq_handler_t colibri_mmc_detect_int,
-				   void *data)
-{
-	int ret;
-
-	ret = gpio_request(MMC_DETECT_PIN, "mmc card detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(MMC_DETECT_PIN);
-	ret = request_irq(gpio_to_irq(MMC_DETECT_PIN), colibri_mmc_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (ret) {
-		gpio_free(MMC_DETECT_PIN);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void colibri_pxa300_mci_exit(struct device *dev, void *data)
-{
-	free_irq(MMC_DETECT_PIN, data);
-	gpio_free(gpio_to_irq(MMC_DETECT_PIN));
-}
 
-static struct pxamci_platform_data colibri_pxa300_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init		= colibri_pxa300_mci_init,
-	.exit		= colibri_pxa300_mci_exit,
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+	GPIO1_nCS2,			/* AX88796 chip select */
+	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
 };
 
-static void __init colibri_pxa300_init_mmc(void)
+static void __init colibri_pxa300_init_eth(void)
 {
-	pxa_set_mci_info(&colibri_pxa300_mci_platform_data);
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+	set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+	platform_device_register(&asix_device);
 }
-
 #else
-static inline void colibri_pxa300_init_mmc(void) {}
-#endif /* CONFIG_MMC_PXA */
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+};
+
 static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
 	.port_mode	= PMM_GLOBAL_MODE,
 	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
-static void __init colibri_pxa300_init_ohci(void)
+void __init colibri_pxa300_init_ohci(void)
 {
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
 	pxa_set_ohci_info(&colibri_pxa300_ohci_info);
 }
 #else
 static inline void colibri_pxa300_init_ohci(void) {}
 #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 
-static void __init colibri_pxa300_init(void)
+static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
+	GPIO7_MMC1_CLK,
+	GPIO14_MMC1_CMD,
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+};
+
+void __init colibri_pxa300_init(void)
 {
-	set_irq_type(COLIBRI_PXA300_ETH_IRQ, IRQ_TYPE_EDGE_FALLING);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_pin_config));
-	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa300_devices));
-	colibri_pxa300_init_mmc();
+	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
+	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
+				mfp_to_gpio(MFP_PIN_GPIO13));
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
new file mode 100644
index 00000000000..cbaa8424fc8
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -0,0 +1,75 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa3xx.c
+ *
+ *  Common functions for all Toradex PXA3xx modules
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int mmc_detect_pin;
+
+static int colibri_pxa3xx_mci_init(struct device *dev,
+				   irq_handler_t colibri_mmc_detect_int,
+				   void *data)
+{
+	int ret;
+
+	ret = gpio_request(mmc_detect_pin, "mmc card detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(mmc_detect_pin);
+	ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (ret) {
+		gpio_free(mmc_detect_pin);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
+{
+	free_irq(mmc_detect_pin, data);
+	gpio_free(gpio_to_irq(mmc_detect_pin));
+}
+
+static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init		= colibri_pxa3xx_mci_init,
+	.exit		= colibri_pxa3xx_mci_exit,
+};
+
+void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
+{
+	pxa3xx_mfp_config(pins, len);
+	mmc_detect_pin = detect_pin;
+	pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
+}
+#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
+
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index e295e8df8d6..0becf6215c1 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -4,6 +4,12 @@
  * common settings for all modules
  */
 
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
@@ -15,17 +21,5 @@
 #define COLIBRI_PXA270_ETH_IRQ		\
 	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
 
-/* definitions for Colibri PXA300 */
-
-#define COLIBRI_PXA300_ETH_IRQ_GPIO     26
-#define COLIBRI_PXA300_ETH_IRQ          \
-	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA300_ETH_IRQ_GPIO))
-
-/* definitions for Colibri PXA320 */
-
-#define COLIBRI_PXA320_ETH_IRQ_GPIO     36
-#define COLIBRI_PXA320_ETH_IRQ          \
-	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA320_ETH_IRQ_GPIO))
-
 #endif /* _COLIBRI_H_ */
 
-- 
cgit v1.2.3


From bac07ecd6c9b16656aced6dc4f9f070120153046 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 23 Mar 2009 02:04:18 +0100
Subject: [ARM] pxa: Colibri PXA320 module basics

This adds basic support for Colibri PXA320 modules.
The file colibri-320.c only contains settings specific to this module,
such as the Ethernet interface.

Cc: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Kconfig          |   5 ++
 arch/arm/mach-pxa/Makefile         |   1 +
 arch/arm/mach-pxa/colibri-pxa320.c | 128 +++++++++++++++++++++++++++++++++++++
 3 files changed, 134 insertions(+)
 create mode 100644 arch/arm/mach-pxa/colibri-pxa320.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 142fd59a40b..96a2006cb59 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -270,6 +270,11 @@ config MACH_COLIBRI300
 	select PXA3xx
 	select CPU_PXA300
 
+config MACH_COLIBRI320
+	bool "Toradex Colibri PXA320"
+	select PXA3xx
+	select CPU_PXA320
+
 config MACH_ZYLONITE
 	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 772569383b3..fc96e7d454b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
+obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
new file mode 100644
index 00000000000..86cb202847e
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -0,0 +1,128 @@
+/*
+ *  arch/arm/mach-pxa/colibri-pxa320.c
+ *
+ *  Support for Toradex PXA320/310 based Colibri module
+ *
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/colibri.h>
+#include <mach/ohci.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
+
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+	.flags		= AXFLG_MAC_FROMDEV,
+	.wordlength	= 2
+};
+
+static struct resource colibri_asix_resource[] = {
+	[0] = {
+		.start = PXA3xx_CS2_PHYS,
+		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device asix_device = {
+	.name		= "ax88796",
+	.id		= 0,
+	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
+	.resource	= colibri_asix_resource,
+	.dev		= {
+		.platform_data = &colibri_asix_platdata
+	}
+};
+
+static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
+	GPIO3_nCS2,			/* AX88796 chip select */
+	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
+};
+
+static void __init colibri_pxa320_init_eth(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
+	set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+	platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa320_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
+	.port_mode	= PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa320_init_ohci(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
+	pxa_set_ohci_info(&colibri_pxa320_ohci_info);
+}
+#else
+static inline void colibri_pxa320_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3
+};
+
+void __init colibri_pxa320_init(void)
+{
+	colibri_pxa320_init_eth();
+	colibri_pxa320_init_ohci();
+	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
+				mfp_to_gpio(MFP_PIN_GPIO28));
+}
+
+MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_pxa320_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
-- 
cgit v1.2.3


From 91fcfb908d62038c3c2cdecb7fb8aa2c98cb70a2 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 23 Mar 2009 02:04:19 +0100
Subject: [ARM] pxa: Add Colibri LCD functions

This adds LCD functions for Colibri PXA300 and Colibri PXA320 and
configures a LQ043T3DX02 panel.

Original-code-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c       | 40 +++++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa320.c       | 39 +++++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa3xx.c       | 46 ++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |  6 +++++
 4 files changed, 131 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 14ef9bf094f..2858a597870 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -25,6 +25,7 @@
 #include <mach/pxa300.h>
 #include <mach/colibri.h>
 #include <mach/ohci.h>
+#include <mach/pxafb.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -106,10 +107,49 @@ static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
 	GPIO6_MMC1_DAT3,
 };
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO62_LCD_CS_N,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+	GPIO76_LCD_VSYNC,
+};
+
+static void __init colibri_pxa300_init_lcd(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
+}
+
+#else
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
 void __init colibri_pxa300_init(void)
 {
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
+	colibri_pxa300_init_lcd();
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO13));
 }
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 86cb202847e..b6773674351 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -25,6 +25,7 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/mfp-pxa320.h>
 #include <mach/colibri.h>
+#include <mach/pxafb.h>
 #include <mach/ohci.h>
 
 #include "generic.h"
@@ -108,10 +109,48 @@ static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
 	GPIO21_MMC1_DAT3
 };
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
+	GPIO6_2_LCD_LDD_0,
+	GPIO7_2_LCD_LDD_1,
+	GPIO8_2_LCD_LDD_2,
+	GPIO9_2_LCD_LDD_3,
+	GPIO10_2_LCD_LDD_4,
+	GPIO11_2_LCD_LDD_5,
+	GPIO12_2_LCD_LDD_6,
+	GPIO13_2_LCD_LDD_7,
+	GPIO63_LCD_LDD_8,
+	GPIO64_LCD_LDD_9,
+	GPIO65_LCD_LDD_10,
+	GPIO66_LCD_LDD_11,
+	GPIO67_LCD_LDD_12,
+	GPIO68_LCD_LDD_13,
+	GPIO69_LCD_LDD_14,
+	GPIO70_LCD_LDD_15,
+	GPIO71_LCD_LDD_16,
+	GPIO72_LCD_LDD_17,
+	GPIO73_LCD_CS_N,
+	GPIO74_LCD_VSYNC,
+	GPIO14_2_LCD_FCLK,
+	GPIO15_2_LCD_LCLK,
+	GPIO16_2_LCD_PCLK,
+	GPIO17_2_LCD_BIAS,
+};
+
+static void __init colibri_pxa320_init_lcd(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
+}
+#else
+static inline void colibri_pxa320_init_lcd(void) {}
+#endif
+
 void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
+	colibri_pxa320_init_lcd();
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
 }
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index cbaa8424fc8..12d0afc54aa 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -23,6 +23,7 @@
 #include <mach/mfp-pxa300.h>
 #include <mach/colibri.h>
 #include <mach/mmc.h>
+#include <mach/pxafb.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -73,3 +74,48 @@ void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
 }
 #endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static int lcd_bl_pin;
+
+/*
+ * LCD panel (Sharp LQ043T3DX02)
+ */
+static void colibri_lcd_backlight(int on)
+{
+	gpio_set_value(lcd_bl_pin, !!on);
+}
+
+static struct pxafb_mode_info sharp_lq43_mode = {
+	.pixclock	= 101936,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 32,
+	.depth		= 18,
+	.hsync_len      = 41,
+	.left_margin    = 2,
+	.right_margin   = 2,
+	.vsync_len      = 10,
+	.upper_margin   = 2,
+	.lower_margin   = 2,
+	.sync	   	= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lq43_info = {
+	.modes		= &sharp_lq43_mode,
+	.num_modes	= 1,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+	.pxafb_backlight_power = colibri_lcd_backlight,
+};
+
+void __init colibri_pxa3xx_init_lcd(int bl_pin)
+{
+	lcd_bl_pin = bl_pin;
+	gpio_request(bl_pin, "lcd backlight");
+	gpio_direction_output(bl_pin, 0);
+	set_pxa_fb_info(&sharp_lq43_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 0becf6215c1..3f2a01d6a03 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,6 +10,12 @@ extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
 static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
 #endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int) {}
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-- 
cgit v1.2.3


From e2bb5befd7b0ae2d045f4413a97db52340edec13 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 23 Mar 2009 02:04:20 +0100
Subject: [ARM] pxa: AC97 pin functions for Colibri PXA310/320

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c | 24 ++++++++++++++++++++++++
 arch/arm/mach-pxa/colibri-pxa320.c | 20 ++++++++++++++++++++
 2 files changed, 44 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 2858a597870..169ab552c21 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -144,12 +144,36 @@ static void __init colibri_pxa300_init_lcd(void)
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+	GPIO24_AC97_SYSCLK,
+	GPIO23_AC97_nACRESET,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+	GPIO29_AC97_BITCLK
+};
+
+static inline void __init colibri_pxa310_init_ac97(void)
+{
+	/* no AC97 codec on Colibri PXA300 */
+	if (!cpu_is_pxa310())
+		return;
+
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
+
 void __init colibri_pxa300_init(void)
 {
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+	colibri_pxa310_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO13));
 }
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index b6773674351..573a9a1dd52 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -145,12 +145,32 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
 
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
+	GPIO34_AC97_SYSCLK,
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET
+};
+
+static inline void __init colibri_pxa320_init_ac97(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa320_init_ac97(void) {}
+#endif
+
 void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+	colibri_pxa320_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
 }
-- 
cgit v1.2.3


From bd5ce4332328c1fe473690a86b2e6a4157be038f Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 12:06:01 +0800
Subject: [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support

1. introduce folder of 'arch/arm/plat-pxa' for common code across different
   PXA processor families

2. initially moved DMA code into plat-pxa

3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors
   should implement its own <mach/dma.h>, provide the following required
   definitions and '#include <plat/dma.h>' in the end:

   - DMAC_REGS_VIRT for mapped virtual address of the DMA registers'
     physical I/O memory

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig                     |   5 ++
 arch/arm/Makefile                    |   1 +
 arch/arm/mach-pxa/Makefile           |   2 +-
 arch/arm/mach-pxa/dma.c              | 144 -----------------------------------
 arch/arm/mach-pxa/include/mach/dma.h |  83 +-------------------
 arch/arm/plat-pxa/Kconfig            |   3 +
 arch/arm/plat-pxa/Makefile           |   6 ++
 arch/arm/plat-pxa/dma.c              | 144 +++++++++++++++++++++++++++++++++++
 arch/arm/plat-pxa/include/plat/dma.h |  85 +++++++++++++++++++++
 9 files changed, 246 insertions(+), 227 deletions(-)
 delete mode 100644 arch/arm/mach-pxa/dma.c
 create mode 100644 arch/arm/plat-pxa/Kconfig
 create mode 100644 arch/arm/plat-pxa/Makefile
 create mode 100644 arch/arm/plat-pxa/dma.c
 create mode 100644 arch/arm/plat-pxa/include/plat/dma.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 12abdd43201..5ba00358e80 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -481,6 +481,7 @@ config ARCH_PXA
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
+	select PLAT_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -618,6 +619,7 @@ source "arch/arm/mach-loki/Kconfig"
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
@@ -687,6 +689,9 @@ config PLAT_IOP
 config PLAT_ORION
 	bool
 
+config PLAT_PXA
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e7ef876e574..897f2830bc4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -109,6 +109,7 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
  textofs-$(CONFIG_SA1111)	   := 0x00208000
 endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
+    plat-$(CONFIG_PLAT_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index fc96e7d454b..70b46570c5c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y				+= clock.o devices.o generic.o irq.o dma.o \
+obj-y				+= clock.o devices.o generic.o irq.o \
 				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
deleted file mode 100644
index 01217e01f7d..00000000000
--- a/arch/arm/mach-pxa/dma.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/dma.c
- *
- *  PXA DMA registration and IRQ dispatching
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-struct dma_channel {
-	char *name;
-	pxa_dma_prio prio;
-	void (*irq_handler)(int, void *);
-	void *data;
-};
-
-static struct dma_channel *dma_channels;
-static int num_dma_channels;
-
-int pxa_request_dma (char *name, pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-		 	 void *data)
-{
-	unsigned long flags;
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || !irq_handler)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	do {
-		/* try grabbing a DMA channel with the requested priority */
-		for (i = 0; i < num_dma_channels; i++) {
-			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name) {
-				found = 1;
-				break;
-			}
-		}
-		/* if requested prio group is full, try a hier priority */
-	} while (!found && prio--);
-
-	if (found) {
-		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-	} else {
-		printk (KERN_WARNING "No more available DMA channels for %s\n", name);
-		i = -ENODEV;
-	}
-
-	local_irq_restore(flags);
-	return i;
-}
-
-void pxa_free_dma (int dma_ch)
-{
-	unsigned long flags;
-
-	if (!dma_channels[dma_ch].name) {
-		printk (KERN_CRIT
-			"%s: trying to free channel %d which is already freed\n",
-			__func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-	dma_channels[dma_ch].name = NULL;
-	local_irq_restore(flags);
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, dint = DINT;
-
-	for (i = 0; i < num_dma_channels; i++) {
-		if (dint & (1 << i)) {
-			struct dma_channel *channel = &dma_channels[i];
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-				DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int __init pxa_init_dma(int irq, int num_ch)
-{
-	int i, ret;
-
-	dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
-	if (dma_channels == NULL)
-		return -ENOMEM;
-
-	/* dma channel priorities on pxa2xx processors:
-	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
-	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
-	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
-	 */
-	for (i = 0; i < num_ch; i++) {
-		DCSR(i) = 0;
-		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
-	}
-
-	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-
-	num_dma_channels = num_ch;
-	return 0;
-}
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index b0812f59d3f..5bd55894a48 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -16,87 +16,6 @@
 
 /* DMA Controller Registers Definitions */
 #define DMAC_REGS_VIRT	io_p2v(0x40000000)
-#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
-
-#define DCSR(n)		DMAC_REG((n) << 2)
-#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
-#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
-#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
-#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
-#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
-#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
-#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
-				 (((n) & 0x3f) << 2))
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-#endif
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int irq, int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
 
+#include <plat/dma.h>
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig
new file mode 100644
index 00000000000..b158e98038e
--- /dev/null
+++ b/arch/arm/plat-pxa/Kconfig
@@ -0,0 +1,3 @@
+if PLAT_PXA
+
+endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
new file mode 100644
index 00000000000..dcc3ceaf717
--- /dev/null
+++ b/arch/arm/plat-pxa/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for code common across different PXA processor families
+#
+
+obj-y	:= dma.o
+
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
new file mode 100644
index 00000000000..70aeee407f7
--- /dev/null
+++ b/arch/arm/plat-pxa/dma.c
@@ -0,0 +1,144 @@
+/*
+ *  linux/arch/arm/plat-pxa/dma.c
+ *
+ *  PXA DMA registration and IRQ dispatching
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+struct dma_channel {
+	char *name;
+	pxa_dma_prio prio;
+	void (*irq_handler)(int, void *);
+	void *data;
+};
+
+static struct dma_channel *dma_channels;
+static int num_dma_channels;
+
+int pxa_request_dma (char *name, pxa_dma_prio prio,
+			void (*irq_handler)(int, void *),
+			void *data)
+{
+	unsigned long flags;
+	int i, found = 0;
+
+	/* basic sanity checks */
+	if (!name || !irq_handler)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	do {
+		/* try grabbing a DMA channel with the requested priority */
+		for (i = 0; i < num_dma_channels; i++) {
+			if ((dma_channels[i].prio == prio) &&
+			    !dma_channels[i].name) {
+				found = 1;
+				break;
+			}
+		}
+		/* if requested prio group is full, try a hier priority */
+	} while (!found && prio--);
+
+	if (found) {
+		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+		dma_channels[i].name = name;
+		dma_channels[i].irq_handler = irq_handler;
+		dma_channels[i].data = data;
+	} else {
+		printk (KERN_WARNING "No more available DMA channels for %s\n", name);
+		i = -ENODEV;
+	}
+
+	local_irq_restore(flags);
+	return i;
+}
+
+void pxa_free_dma (int dma_ch)
+{
+	unsigned long flags;
+
+	if (!dma_channels[dma_ch].name) {
+		printk (KERN_CRIT
+			"%s: trying to free channel %d which is already freed\n",
+			__func__, dma_ch);
+		return;
+	}
+
+	local_irq_save(flags);
+	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+	dma_channels[dma_ch].name = NULL;
+	local_irq_restore(flags);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+	int i, dint = DINT;
+
+	for (i = 0; i < num_dma_channels; i++) {
+		if (dint & (1 << i)) {
+			struct dma_channel *channel = &dma_channels[i];
+			if (channel->name && channel->irq_handler) {
+				channel->irq_handler(i, channel->data);
+			} else {
+				/*
+				 * IRQ for an unregistered DMA channel:
+				 * let's clear the interrupts and disable it.
+				 */
+				printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+				DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+			}
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+int __init pxa_init_dma(int irq, int num_ch)
+{
+	int i, ret;
+
+	dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
+	if (dma_channels == NULL)
+		return -ENOMEM;
+
+	/* dma channel priorities on pxa2xx processors:
+	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
+	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
+	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
+	 */
+	for (i = 0; i < num_ch; i++) {
+		DCSR(i) = 0;
+		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+	}
+
+	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+	if (ret) {
+		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		kfree(dma_channels);
+		return ret;
+	}
+
+	num_dma_channels = num_ch;
+	return 0;
+}
+
+EXPORT_SYMBOL(pxa_request_dma);
+EXPORT_SYMBOL(pxa_free_dma);
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
new file mode 100644
index 00000000000..a7b91dc0685
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -0,0 +1,85 @@
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n)		DMAC_REG((n) << 2)
+#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
+#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
+#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+				 (((n) & 0x3f) << 2))
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int irq, int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* __PLAT_DMA_H */
-- 
cgit v1.2.3


From 38f539a608c9a3b40b30f1892bd5f9a38f4e5ffe Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 12:09:06 +0800
Subject: [ARM] pxa: move common GPIO handling code into plat-pxa

1. add common GPIO handling code into [arch/arm/plat-pxa]

2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors
   should implement its own <mach/gpio.h>, provide the following required
   definitions and '#include <plat/gpio.h>' in the end:

   - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers'
     physical I/O memory

   - macros of GPLR(), GPSR(), GPDR() for constant optimization for
     functions gpio_{set,get}_value() (so that bit-bang code can still
     have tolerable performance)

   - NR_BUILTIN_GPIO for the number of onchip GPIO

   - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they
     can be either macros or inlined functions

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/Makefile            |   2 +-
 arch/arm/mach-pxa/gpio.c              | 365 ----------------------------------
 arch/arm/mach-pxa/include/mach/gpio.h |  32 +--
 arch/arm/plat-pxa/Makefile            |   1 +
 arch/arm/plat-pxa/gpio.c              | 337 +++++++++++++++++++++++++++++++
 arch/arm/plat-pxa/include/plat/gpio.h |  62 ++++++
 6 files changed, 402 insertions(+), 397 deletions(-)
 delete mode 100644 arch/arm/mach-pxa/gpio.c
 create mode 100644 arch/arm/plat-pxa/gpio.c
 create mode 100644 arch/arm/plat-pxa/include/plat/gpio.h

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 70b46570c5c..c80e1bac494 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o \
-				   time.o gpio.o reset.o
+				   time.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
 ifeq ($(CONFIG_CPU_FREQ),y)
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
deleted file mode 100644
index 7c2267036bf..00000000000
--- a/arch/arm/mach-pxa/gpio.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/gpio.c
- *
- *  Generic PXA GPIO handling
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/bootmem.h>
-
-#include <mach/gpio.h>
-
-int pxa_last_gpio;
-
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
- * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
- * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
- * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
- *
- * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
- * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
- * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
- *
- * NOTE:
- *   BANK 3 is only available on PXA27x and later processors.
- *   BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
-
-struct pxa_gpio_chip {
-	struct gpio_chip chip;
-	void __iomem	*regbase;
-	char label[10];
-
-	unsigned long	irq_mask;
-	unsigned long	irq_edge_rise;
-	unsigned long	irq_edge_fall;
-
-#ifdef CONFIG_PM
-	unsigned long	saved_gplr;
-	unsigned long	saved_gpdr;
-	unsigned long	saved_grer;
-	unsigned long	saved_gfer;
-#endif
-};
-
-static DEFINE_SPINLOCK(gpio_lock);
-static struct pxa_gpio_chip *pxa_gpio_chips;
-
-#define for_each_gpio_chip(i, c)			\
-	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
-
-static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
-{
-	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
-}
-
-static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
-{
-	return &pxa_gpio_chips[gpio_to_bank(gpio)];
-}
-
-static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	void __iomem *base = gpio_chip_base(chip);
-	uint32_t value, mask = 1 << offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	value = __raw_readl(base + GPDR_OFFSET);
-	if (__gpio_is_inverted(chip->base + offset))
-		value |= mask;
-	else
-		value &= ~mask;
-	__raw_writel(value, base + GPDR_OFFSET);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return 0;
-}
-
-static int pxa_gpio_direction_output(struct gpio_chip *chip,
-				     unsigned offset, int value)
-{
-	void __iomem *base = gpio_chip_base(chip);
-	uint32_t tmp, mask = 1 << offset;
-	unsigned long flags;
-
-	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	tmp = __raw_readl(base + GPDR_OFFSET);
-	if (__gpio_is_inverted(chip->base + offset))
-		tmp &= ~mask;
-	else
-		tmp |= mask;
-	__raw_writel(tmp, base + GPDR_OFFSET);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return 0;
-}
-
-static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
-}
-
-static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	__raw_writel(1 << offset, gpio_chip_base(chip) +
-				(value ? GPSR_OFFSET : GPCR_OFFSET));
-}
-
-static int __init pxa_init_gpio_chip(int gpio_end)
-{
-	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
-	struct pxa_gpio_chip *chips;
-
-	/* this is early, we have to use bootmem allocator, and we really
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
-	if (chips == NULL) {
-		pr_err("%s: failed to allocate GPIO chips\n", __func__);
-		return -ENOMEM;
-	}
-
-	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
-		struct gpio_chip *c = &chips[i].chip;
-
-		sprintf(chips[i].label, "gpio-%d", i);
-		chips[i].regbase = (void __iomem *)GPIO_BANK(i);
-
-		c->base  = gpio;
-		c->label = chips[i].label;
-
-		c->direction_input  = pxa_gpio_direction_input;
-		c->direction_output = pxa_gpio_direction_output;
-		c->get = pxa_gpio_get;
-		c->set = pxa_gpio_set;
-
-		/* number of GPIOs on last bank may be less than 32 */
-		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
-		gpiochip_add(c);
-	}
-	pxa_gpio_chips = chips;
-	return 0;
-}
-
-static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-	struct pxa_gpio_chip *c;
-	int gpio = irq_to_gpio(irq);
-	unsigned long gpdr, mask = GPIO_bit(gpio);
-
-	c = gpio_to_chip(gpio);
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		 * GPIOs set to alternate function or to output during probe
-		 */
-		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
-			return 0;
-
-		if (__gpio_is_occupied(gpio))
-			return 0;
-
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
-
-	if (__gpio_is_inverted(gpio))
-		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
-	else
-		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		c->irq_edge_rise |= mask;
-	else
-		c->irq_edge_rise &= ~mask;
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		c->irq_edge_fall |= mask;
-	else
-		c->irq_edge_fall &= ~mask;
-
-	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
-	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
-
-	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
-		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
-		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
-	return 0;
-}
-
-static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct pxa_gpio_chip *c;
-	int loop, gpio, gpio_base, n;
-	unsigned long gedr;
-
-	do {
-		loop = 0;
-		for_each_gpio_chip(gpio, c) {
-			gpio_base = c->chip.base;
-
-			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
-			gedr = gedr & c->irq_mask;
-			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
-
-			n = find_first_bit(&gedr, BITS_PER_LONG);
-			while (n < BITS_PER_LONG) {
-				loop = 1;
-
-				generic_handle_irq(gpio_to_irq(gpio_base + n));
-				n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
-			}
-		}
-	} while (loop);
-}
-
-static void pxa_ack_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq_to_gpio(irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
-
-	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
-}
-
-static void pxa_mask_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq_to_gpio(irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
-	uint32_t grer, gfer;
-
-	c->irq_mask &= ~GPIO_bit(gpio);
-
-	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
-	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
-	__raw_writel(grer, c->regbase + GRER_OFFSET);
-	__raw_writel(gfer, c->regbase + GFER_OFFSET);
-}
-
-static void pxa_unmask_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq_to_gpio(irq);
-	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
-
-	c->irq_mask |= GPIO_bit(gpio);
-	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
-	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
-}
-
-static struct irq_chip pxa_muxed_gpio_chip = {
-	.name		= "GPIO",
-	.ack		= pxa_ack_muxed_gpio,
-	.mask		= pxa_mask_muxed_gpio,
-	.unmask		= pxa_unmask_muxed_gpio,
-	.set_type	= pxa_gpio_irq_type,
-};
-
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
-{
-	struct pxa_gpio_chip *c;
-	int gpio, irq;
-
-	pxa_last_gpio = end;
-
-	/* Initialize GPIO chips */
-	pxa_init_gpio_chip(end);
-
-	/* clear all GPIO edge detects */
-	for_each_gpio_chip(gpio, c) {
-		__raw_writel(0, c->regbase + GFER_OFFSET);
-		__raw_writel(0, c->regbase + GRER_OFFSET);
-		__raw_writel(~0,c->regbase + GEDR_OFFSET);
-	}
-
-	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
-		set_irq_chip(irq, &pxa_muxed_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Install handler for GPIO>=2 edge detect interrupts */
-	set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
-	pxa_muxed_gpio_chip.set_wake = fn;
-}
-
-#ifdef CONFIG_PM
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct pxa_gpio_chip *c;
-	int gpio;
-
-	for_each_gpio_chip(gpio, c) {
-		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
-		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
-		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
-		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
-
-		/* Clear GPIO transition detect bits */
-		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
-	}
-	return 0;
-}
-
-static int pxa_gpio_resume(struct sys_device *dev)
-{
-	struct pxa_gpio_chip *c;
-	int gpio;
-
-	for_each_gpio_chip(gpio, c) {
-		/* restore level with set/clear */
-		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
-		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
-
-		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
-		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
-		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
-	}
-	return 0;
-}
-#else
-#define pxa_gpio_suspend	NULL
-#define pxa_gpio_resume		NULL
-#endif
-
-struct sysdev_class pxa_gpio_sysclass = {
-	.name		= "gpio",
-	.suspend	= pxa_gpio_suspend,
-	.resume		= pxa_gpio_resume,
-};
-
-static int __init pxa_gpio_init(void)
-{
-	return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c72c89a2285..b024a8b3743 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -99,40 +99,12 @@
 #define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
 
 
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
 #define NR_BUILTIN_GPIO 128
 
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-		return GPLR(gpio) & GPIO_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-		if (value)
-			GPSR(gpio) = GPIO_bit(gpio);
-		else
-			GPCR(gpio) = GPIO_bit(gpio);
-	} else {
-		__gpio_set_value(gpio, value);
-	}
-}
-
-#define gpio_cansleep		__gpio_cansleep
 #define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
 #define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
 
-
 #ifdef CONFIG_CPU_PXA26x
 /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
  * as well as their Alternate Function value being '1' for GPIO in GAFRx.
@@ -165,7 +137,5 @@ static inline int __gpio_is_occupied(unsigned gpio)
 		return GPDR(gpio) & GPIO_bit(gpio);
 }
 
-typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+#include <plat/gpio.h>
 #endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index dcc3ceaf717..b837df44048 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,3 +4,4 @@
 
 obj-y	:= dma.o
 
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
new file mode 100644
index 00000000000..af819bf21b6
--- /dev/null
+++ b/arch/arm/plat-pxa/gpio.c
@@ -0,0 +1,337 @@
+/*
+ *  linux/arch/arm/plat-pxa/gpio.c
+ *
+ *  Generic PXA GPIO handling
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/bootmem.h>
+
+#include <mach/gpio.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem	*regbase;
+	char label[10];
+
+	unsigned long	irq_mask;
+	unsigned long	irq_edge_rise;
+	unsigned long	irq_edge_fall;
+
+#ifdef CONFIG_PM
+	unsigned long	saved_gplr;
+	unsigned long	saved_gpdr;
+	unsigned long	saved_grer;
+	unsigned long	saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c)			\
+	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+{
+	return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t value, mask = 1 << offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	value = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		value |= mask;
+	else
+		value &= ~mask;
+	__raw_writel(value, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t tmp, mask = 1 << offset;
+	unsigned long flags;
+
+	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	tmp = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	__raw_writel(tmp, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	__raw_writel(1 << offset, gpio_chip_base(chip) +
+				(value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+	struct pxa_gpio_chip *chips;
+
+	/* this is early, we have to use bootmem allocator, and we really
+	 * want this to be allocated dynamically for different 'gpio_end'
+	 */
+	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	if (chips == NULL) {
+		pr_err("%s: failed to allocate GPIO chips\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+		struct gpio_chip *c = &chips[i].chip;
+
+		sprintf(chips[i].label, "gpio-%d", i);
+		chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+		c->base  = gpio;
+		c->label = chips[i].label;
+
+		c->direction_input  = pxa_gpio_direction_input;
+		c->direction_output = pxa_gpio_direction_output;
+		c->get = pxa_gpio_get;
+		c->set = pxa_gpio_set;
+
+		/* number of GPIOs on last bank may be less than 32 */
+		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+		gpiochip_add(c);
+	}
+	pxa_gpio_chips = chips;
+	return 0;
+}
+
+static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+	struct pxa_gpio_chip *c;
+	int gpio = irq_to_gpio(irq);
+	unsigned long gpdr, mask = GPIO_bit(gpio);
+
+	c = gpio_to_chip(gpio);
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* Don't mess with enabled GPIOs using preconfigured edges or
+		 * GPIOs set to alternate function or to output during probe
+		 */
+		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+			return 0;
+
+		if (__gpio_is_occupied(gpio))
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+	if (__gpio_is_inverted(gpio))
+		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
+	else
+		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		c->irq_edge_rise |= mask;
+	else
+		c->irq_edge_rise &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		c->irq_edge_fall |= mask;
+	else
+		c->irq_edge_fall &= ~mask;
+
+	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+
+	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
+		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
+		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+	return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pxa_gpio_chip *c;
+	int loop, gpio, gpio_base, n;
+	unsigned long gedr;
+
+	do {
+		loop = 0;
+		for_each_gpio_chip(gpio, c) {
+			gpio_base = c->chip.base;
+
+			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+			gedr = gedr & c->irq_mask;
+			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+			n = find_first_bit(&gedr, BITS_PER_LONG);
+			while (n < BITS_PER_LONG) {
+				loop = 1;
+
+				generic_handle_irq(gpio_to_irq(gpio_base + n));
+				n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+			}
+		}
+	} while (loop);
+}
+
+static void pxa_ack_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+	uint32_t grer, gfer;
+
+	c->irq_mask &= ~GPIO_bit(gpio);
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq_to_gpio(irq);
+	struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+	c->irq_mask |= GPIO_bit(gpio);
+	__raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+	__raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
+	.ack		= pxa_ack_muxed_gpio,
+	.mask		= pxa_mask_muxed_gpio,
+	.unmask		= pxa_unmask_muxed_gpio,
+	.set_type	= pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+	struct pxa_gpio_chip *c;
+	int gpio, irq;
+
+	pxa_last_gpio = end;
+
+	/* Initialize GPIO chips */
+	pxa_init_gpio_chip(end);
+
+	/* clear all GPIO edge detects */
+	for_each_gpio_chip(gpio, c) {
+		__raw_writel(0, c->regbase + GFER_OFFSET);
+		__raw_writel(0, c->regbase + GRER_OFFSET);
+		__raw_writel(~0,c->regbase + GEDR_OFFSET);
+	}
+
+	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+		set_irq_chip(irq, &pxa_muxed_gpio_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Install handler for GPIO>=2 edge detect interrupts */
+	set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
+	pxa_muxed_gpio_chip.set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+		/* Clear GPIO transition detect bits */
+		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+	}
+	return 0;
+}
+
+static int pxa_gpio_resume(struct sys_device *dev)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		/* restore level with set/clear */
+		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+	}
+	return 0;
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+struct sysdev_class pxa_gpio_sysclass = {
+	.name		= "gpio",
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_init(void)
+{
+	return sysdev_class_register(&pxa_gpio_sysclass);
+}
+
+core_initcall(pxa_gpio_init);
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
new file mode 100644
index 00000000000..44248cb926a
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -0,0 +1,62 @@
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
+ * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
+ * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
+ * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
+ *
+ * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
+ * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
+ * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
+ *
+ * NOTE:
+ *   BANK 3 is only available on PXA27x and later processors.
+ *   BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep		__gpio_cansleep
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+#endif /* __PLAT_GPIO_H */
-- 
cgit v1.2.3


From f8dec04d33b94a4cfa9358fd9666c01480bb164d Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 15 Jan 2009 16:42:56 +0800
Subject: [ARM] pxa: move common MFP handling code into plat-pxa

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/include/mach/mfp-pxa25x.h |   1 -
 arch/arm/mach-pxa/include/mach/mfp-pxa27x.h |   1 -
 arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h |   2 +-
 arch/arm/mach-pxa/include/mach/mfp-pxa300.h |   1 -
 arch/arm/mach-pxa/include/mach/mfp-pxa320.h |   1 -
 arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h | 130 ++--------
 arch/arm/mach-pxa/include/mach/mfp-pxa930.h |   1 -
 arch/arm/mach-pxa/mfp-pxa3xx.c              | 189 +-------------
 arch/arm/mach-pxa/pxa300.c                  |  10 +-
 arch/arm/mach-pxa/pxa320.c                  |   6 +-
 arch/arm/mach-pxa/pxa930.c                  |   6 +-
 arch/arm/plat-pxa/Makefile                  |   2 +-
 arch/arm/plat-pxa/include/plat/mfp.h        | 369 ++++++++++++++++++++++++++++
 arch/arm/plat-pxa/mfp.c                     | 278 +++++++++++++++++++++
 14 files changed, 680 insertions(+), 317 deletions(-)
 create mode 100644 arch/arm/plat-pxa/include/plat/mfp.h
 create mode 100644 arch/arm/plat-pxa/mfp.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index a72869b73ee..b13dc0269a6 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -1,7 +1,6 @@
 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa2xx.h>
 
 /* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index da4f85a4f99..6543c05f47e 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -8,7 +8,6 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa2xx.h>
 
 /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 3e9211591e2..658b28ed129 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <mach/mfp.h>
+#include <plat/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index 928fbef9cbf..ae8441192ef 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 80a0da9e092..07897e61d05 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
index 1f6b35c015d..d375195d982 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -1,68 +1,9 @@
 #ifndef __ASM_ARCH_MFP_PXA3XX_H
 #define __ASM_ARCH_MFP_PXA3XX_H
 
-#define MFPR_BASE	(0x40e10000)
-#define MFPR_SIZE	(PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL		(0x1 << 15)
-#define MFPR_PULLUP_EN		(0x1 << 14)
-#define MFPR_PULLDOWN_EN	(0x1 << 13)
-#define MFPR_SLEEP_SEL		(0x1 << 9)
-#define MFPR_SLEEP_OE_N		(0x1 << 7)
-#define MFPR_EDGE_CLEAR		(0x1 << 6)
-#define MFPR_EDGE_FALL_EN	(0x1 << 5)
-#define MFPR_EDGE_RISE_EN	(0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x)	((x) << 8)
-#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+#include <plat/mfp.h>
 
-#define MFPR_EDGE_NONE		(0)
-#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFPR_LPM_INPUT		(0)
-#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK		(0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior,  the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition       pull_sel  pullup_en  pulldown_en
- * MFPR_PULL_NONE       0         0        0
- * MFPR_PULL_LOW        1         0        1
- * MFPR_PULL_HIGH       1         1        0
- * MFPR_PULL_BOTH       1         1        1
- */
-#define MFPR_PULL_NONE		(0)
-#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_BASE	(0x40e10000)
 
 /* PXA3xx common MFP configurations - processor specific ones defined
  * in mfp-pxa300.h and mfp-pxa320.h
@@ -197,56 +138,21 @@
 #define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
 #define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
 
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR()   to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct pxa3xx_mfp_addr_map {
-	unsigned int	start;
-	unsigned int	end;
-	unsigned long	offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
-	{ MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
-	{ MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
+/* NOTE: usage of these two functions is not recommended,
+ * use pxa3xx_mfp_config() instead.
  */
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
+static inline unsigned long pxa3xx_mfp_read(int mfp)
+{
+	return mfp_read(mfp);
+}
+
+static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+	mfp_write(mfp, val);
+}
+
+static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
+{
+	mfp_config(mfp_cfg, num);
+}
 #endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fa73f56a137..0d119d3b922 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 
 /* GPIO */
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index eb197a6e8e9..7a270eecd48 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -20,183 +20,9 @@
 #include <linux/sysdev.h>
 
 #include <mach/hardware.h>
-#include <mach/mfp.h>
 #include <mach/mfp-pxa3xx.h>
 #include <mach/pxa3xx-regs.h>
 
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
-
-struct pxa3xx_mfp_pin {
-	unsigned long	config;		/* -1 for not configured */
-	unsigned long	mfpr_off;	/* MFPRxx Register offset */
-	unsigned long	mfpr_run;	/* Run-Mode Register Value */
-	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
-};
-
-static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
-	MFPR_LPM_INPUT,
-	MFPR_LPM_DRIVE_LOW,
-	MFPR_LPM_DRIVE_HIGH,
-	MFPR_LPM_PULL_LOW,
-	MFPR_LPM_PULL_HIGH,
-	MFPR_LPM_FLOAT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
-	MFPR_PULL_NONE,
-	MFPR_PULL_LOW,
-	MFPR_PULL_HIGH,
-	MFPR_PULL_BOTH,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
-	MFPR_EDGE_NONE,
-	MFPR_EDGE_RISE,
-	MFPR_EDGE_FALL,
-	MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off)			\
-	__raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val)		\
-	__raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p)	((p)->config != -1)
-
-/*
- * perform a read-back of any MFPR register to make sure the
- * previous writings are finished
- */
-#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
-
-static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
-{
-	if (mfp_configured(p))
-		mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
-{
-	if (mfp_configured(p)) {
-		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
-		if (mfpr_clr != p->mfpr_run)
-			mfpr_writel(p->mfpr_off, mfpr_clr);
-		if (p->mfpr_lpm != mfpr_clr)
-			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
-	}
-}
-
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (i = 0; i < num; i++, mfp_cfgs++) {
-		unsigned long tmp, c = *mfp_cfgs;
-		struct pxa3xx_mfp_pin *p;
-		int pin, af, drv, lpm, edge, pull;
-
-		pin = MFP_PIN(c);
-		BUG_ON(pin >= MFP_PIN_MAX);
-		p = &mfp_table[pin];
-
-		af  = MFP_AF(c);
-		drv = MFP_DS(c);
-		lpm = MFP_LPM_STATE(c);
-		edge = MFP_LPM_EDGE(c);
-		pull = MFP_PULL(c);
-
-		/* run-mode pull settings will conflict with MFPR bits of
-		 * low power mode state,  calculate mfpr_run and mfpr_lpm
-		 * individually if pull != MFP_PULL_NONE
-		 */
-		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
-		if (likely(pull == MFP_PULL_NONE)) {
-			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_lpm = p->mfpr_run;
-		} else {
-			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_run = tmp | mfpr_pull[pull];
-		}
-
-		p->config = c; __mfp_config_run(p);
-	}
-
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long pxa3xx_mfp_read(int mfp)
-{
-	unsigned long val, flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	val = mfpr_readl(mfp_table[mfp].mfpr_off);
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
-	return val;
-}
-
-void pxa3xx_mfp_write(int mfp, unsigned long val)
-{
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_writel(mfp_table[mfp].mfpr_off, val);
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
-{
-	struct pxa3xx_mfp_addr_map *p;
-	unsigned long offset, flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (p = map; p->start != MFP_PIN_INVALID; p++) {
-		offset = p->offset;
-		i = p->start;
-
-		do {
-			mfp_table[i].mfpr_off = offset;
-			mfp_table[i].mfpr_run = 0;
-			mfp_table[i].mfpr_lpm = 0;
-			offset += 4; i++;
-		} while ((i <= p->end) && (p->end != -1));
-	}
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_init_mfp(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
-		mfp_table[i].config = -1;
-}
-
 #ifdef CONFIG_PM
 /*
  * Configure the MFPs appropriately for suspend/resume.
@@ -207,23 +33,13 @@ void __init pxa3xx_init_mfp(void)
  */
 static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
-		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
-		__mfp_config_lpm(p);
-	}
+	mfp_config_lpm();
 	return 0;
 }
 
 static int pxa3xx_mfp_resume(struct sys_device *d)
 {
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
-		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
-		__mfp_config_run(p);
-	}
+	mfp_config_run();
 
 	/* clear RDH bit when MFP settings are restored
 	 *
@@ -231,7 +47,6 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
 	 * preserve them here in case they will be referenced later
 	 */
 	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
 	return 0;
 }
 #else
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 37bb12d13ca..4ba6d21f851 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -23,7 +23,7 @@
 #include "devices.h"
 #include "clock.h"
 
-static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
 	MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
@@ -72,7 +72,7 @@ static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 };
 
 /* override pxa300 MFP register addresses */
-static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_X(GPIO30,  GPIO98,   0x0418),
 	MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
 
@@ -98,13 +98,13 @@ static struct clk_lookup pxa310_clkregs[] = {
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		pxa3xx_init_mfp();
-		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa300_mfp_addr_map);
 		clks_register(ARRAY_AND_SIZE(common_clkregs));
 	}
 
 	if (cpu_is_pxa310()) {
-		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		mfp_init_addr(pxa310_mfp_addr_map);
 		clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
 	}
 
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index e708f4e0eca..8b3d97efada 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -23,7 +23,7 @@
 #include "devices.h"
 #include "clock.h"
 
-static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
 	MFP_ADDR_X(GPIO5,  GPIO9,   0x028C),
@@ -86,8 +86,8 @@ static struct clk_lookup pxa320_clkregs[] = {
 static int __init pxa320_init(void)
 {
 	if (cpu_is_pxa320()) {
-		pxa3xx_init_mfp();
-		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa320_mfp_addr_map);
 		clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
 	}
 
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index f15dfa55f27..71131742fff 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -18,7 +18,7 @@
 
 #include <mach/pxa930.h>
 
-static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 
 	MFP_ADDR(GPIO0, 0x02e0),
 	MFP_ADDR(GPIO1, 0x02dc),
@@ -179,8 +179,8 @@ static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 static int __init pxa930_init(void)
 {
 	if (cpu_is_pxa930()) {
-		pxa3xx_init_mfp();
-		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa930_mfp_addr_map);
 	}
 
 	return 0;
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index b837df44048..4be37235f57 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,6 +2,6 @@
 # Makefile for code common across different PXA processor families
 #
 
-obj-y	:= dma.o
+obj-y	:= dma.o mfp.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
new file mode 100644
index 00000000000..a22229cde09
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -0,0 +1,369 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ *   Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * begining at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}()	- for direct read/write access to the MFPR register
+ * mfp_config()		- for configuring a group of MFPR registers
+ * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
+ * mfp_config_run()	- configuring all run time  MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
new file mode 100644
index 00000000000..e716c622a17
--- /dev/null
+++ b/arch/arm/plat-pxa/mfp.c
@@ -0,0 +1,278 @@
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ *   Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p)	((p)->config != -1)
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
+
+		pin = MFP_PIN(c);
+		BUG_ON(pin >= MFP_PIN_MAX);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(unsigned long mfpr_base)
+{
+	int i;
+
+	/* initialize the table with default - unconfigured */
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
+
+	mfpr_mmio_base = (void __iomem *)mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+	struct mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_run(p);
+}
-- 
cgit v1.2.3


From 49cbe78637eb0503f45fc9b556ec08918a616534 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 14:15:18 +0800
Subject: [ARM] pxa: add base support for Marvell's PXA168 processor line
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

"""The Marvell® PXA168 processor is the first in a family of application
processors targeted at mass market opportunities in computing and consumer
devices. It balances high computing and multimedia performance with low
power consumption to support extended battery life, and includes a wealth
of integrated peripherals to reduce overall BOM cost .... """

See http://www.marvell.com/featured/pxa168.jsp for more information.

  1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core,
     there are many enhancements like instructions for flushing the
     whole D-cache, and so on

  2. Clock reuses Russell's common clkdev, and added the basic support
     for UART1/2.

  3. Devices are a bit different from the 'mach-pxa' way, the platform
     devices are now dynamically allocated only when necessary (i.e.
     when pxa_register_device() is called). Description for each device
     are stored in an array of 'struct pxa_device_desc'. Now that:

     a. this array of device description is marked with __initdata and
        can be freed up system is fully up

     b. which means board code has to add all needed devices early in
        his initializing function

     c. platform specific data can now be marked as __initdata since
        they are allocated and copied by platform_device_add_data()

  4. only the basic UART1/2/3 are added, more devices will come later.

Signed-off-by: Jason Chagas <chagas@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig                             |  16 ++
 arch/arm/Makefile                            |   1 +
 arch/arm/boot/compressed/head.S              |  12 +
 arch/arm/include/asm/cacheflush.h            |   8 +
 arch/arm/include/asm/proc-fns.h              |   8 +
 arch/arm/mach-mmp/Kconfig                    |  27 ++
 arch/arm/mach-mmp/Makefile                   |  12 +
 arch/arm/mach-mmp/Makefile.boot              |   1 +
 arch/arm/mach-mmp/aspenite.c                 |  42 +++
 arch/arm/mach-mmp/clock.c                    |  83 ++++++
 arch/arm/mach-mmp/clock.h                    |  71 +++++
 arch/arm/mach-mmp/common.c                   |  37 +++
 arch/arm/mach-mmp/common.h                   |  11 +
 arch/arm/mach-mmp/devices.c                  |  69 +++++
 arch/arm/mach-mmp/include/mach/addr-map.h    |  34 +++
 arch/arm/mach-mmp/include/mach/clkdev.h      |   7 +
 arch/arm/mach-mmp/include/mach/cputype.h     |  21 ++
 arch/arm/mach-mmp/include/mach/debug-macro.S |  23 ++
 arch/arm/mach-mmp/include/mach/devices.h     |  27 ++
 arch/arm/mach-mmp/include/mach/dma.h         |  13 +
 arch/arm/mach-mmp/include/mach/entry-macro.S |  25 ++
 arch/arm/mach-mmp/include/mach/hardware.h    |   4 +
 arch/arm/mach-mmp/include/mach/io.h          |  21 ++
 arch/arm/mach-mmp/include/mach/irqs.h        |  58 ++++
 arch/arm/mach-mmp/include/mach/memory.h      |  14 +
 arch/arm/mach-mmp/include/mach/pxa168.h      |  23 ++
 arch/arm/mach-mmp/include/mach/regs-apbc.h   |  53 ++++
 arch/arm/mach-mmp/include/mach/regs-apmu.h   |  36 +++
 arch/arm/mach-mmp/include/mach/regs-icu.h    |  31 ++
 arch/arm/mach-mmp/include/mach/regs-timers.h |  44 +++
 arch/arm/mach-mmp/include/mach/system.h      |  21 ++
 arch/arm/mach-mmp/include/mach/timex.h       |   9 +
 arch/arm/mach-mmp/include/mach/uncompress.h  |  41 +++
 arch/arm/mach-mmp/include/mach/vmalloc.h     |   5 +
 arch/arm/mach-mmp/irq.c                      |  55 ++++
 arch/arm/mach-mmp/pxa168.c                   |  77 +++++
 arch/arm/mach-mmp/time.c                     | 199 +++++++++++++
 arch/arm/mm/Kconfig                          |  15 +-
 arch/arm/mm/Makefile                         |   1 +
 arch/arm/mm/proc-mohawk.S                    | 416 +++++++++++++++++++++++++++
 40 files changed, 1669 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-mmp/Kconfig
 create mode 100644 arch/arm/mach-mmp/Makefile
 create mode 100644 arch/arm/mach-mmp/Makefile.boot
 create mode 100644 arch/arm/mach-mmp/aspenite.c
 create mode 100644 arch/arm/mach-mmp/clock.c
 create mode 100644 arch/arm/mach-mmp/clock.h
 create mode 100644 arch/arm/mach-mmp/common.c
 create mode 100644 arch/arm/mach-mmp/common.h
 create mode 100644 arch/arm/mach-mmp/devices.c
 create mode 100644 arch/arm/mach-mmp/include/mach/addr-map.h
 create mode 100644 arch/arm/mach-mmp/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-mmp/include/mach/cputype.h
 create mode 100644 arch/arm/mach-mmp/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-mmp/include/mach/devices.h
 create mode 100644 arch/arm/mach-mmp/include/mach/dma.h
 create mode 100644 arch/arm/mach-mmp/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-mmp/include/mach/hardware.h
 create mode 100644 arch/arm/mach-mmp/include/mach/io.h
 create mode 100644 arch/arm/mach-mmp/include/mach/irqs.h
 create mode 100644 arch/arm/mach-mmp/include/mach/memory.h
 create mode 100644 arch/arm/mach-mmp/include/mach/pxa168.h
 create mode 100644 arch/arm/mach-mmp/include/mach/regs-apbc.h
 create mode 100644 arch/arm/mach-mmp/include/mach/regs-apmu.h
 create mode 100644 arch/arm/mach-mmp/include/mach/regs-icu.h
 create mode 100644 arch/arm/mach-mmp/include/mach/regs-timers.h
 create mode 100644 arch/arm/mach-mmp/include/mach/system.h
 create mode 100644 arch/arm/mach-mmp/include/mach/timex.h
 create mode 100644 arch/arm/mach-mmp/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-mmp/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-mmp/irq.c
 create mode 100644 arch/arm/mach-mmp/pxa168.c
 create mode 100644 arch/arm/mach-mmp/time.c
 create mode 100644 arch/arm/mm/proc-mohawk.S

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ba00358e80..fdcd2d54e93 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -478,6 +478,8 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
+	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -485,6 +487,18 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
+config ARCH_MMP
+	bool "Marvell PXA168"
+	depends on MMU
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168 processor line.
+
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
@@ -621,6 +635,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
 source "arch/arm/mach-pxa/Kconfig"
 source "arch/arm/plat-pxa/Kconfig"
 
+source "arch/arm/mach-mmp/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 897f2830bc4..95186ef17e1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -109,6 +109,7 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
  textofs-$(CONFIG_SA1111)	   := 0x00208000
 endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
+ machine-$(CONFIG_ARCH_MMP)	   := mmp
     plat-$(CONFIG_PLAT_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d1b678dc120..d14b827adcd 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -636,6 +636,18 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
+		.word	0x56158000		@ PXA168
+		.word	0xfffff000
+		b __armv4_mmu_cache_on
+		b __armv4_mmu_cache_off
+		b __armv5tej_mmu_cache_flush
+
+		.word	0x56056930
+		.word	0xff0ffff0		@ PXA935
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
+
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 6cbd8fdc9f1..bfb0cb9aaa9 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -94,6 +94,14 @@
 # endif
 #endif
 
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE mohawk
+# endif
+#endif
+
 #if defined(CONFIG_CPU_FEROCEON)
 # define MULTI_CACHE 1
 #endif
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index db80203b68e..c6250311550 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -185,6 +185,14 @@
 #   define CPU_NAME cpu_xsc3
 #  endif
 # endif
+# ifdef CONFIG_CPU_MOHAWK
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_mohawk
+#  endif
+# endif
 # ifdef CONFIG_CPU_FEROCEON
 #  ifdef CPU_NAME
 #   undef  MULTI_CPU
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
new file mode 100644
index 00000000000..b5232676355
--- /dev/null
+++ b/arch/arm/mach-mmp/Kconfig
@@ -0,0 +1,27 @@
+if ARCH_MMP
+
+menu "Marvell PXA168 Implmentations"
+
+config MACH_ASPENITE
+	bool "Marvell's PXA168 Aspenite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Aspenite Development Board.
+
+config MACH_ZYLONITE2
+	bool "Marvell's PXA168 Zylonite2 Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Zylonite2 Development Board.
+
+endmenu
+
+config CPU_PXA168
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA168
+
+endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
new file mode 100644
index 00000000000..0ac7644ec99
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for Marvell's PXA168 processors line
+#
+
+obj-y				+= common.o clock.o devices.o irq.o time.o
+
+# SoC support
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+
+# board support
+obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
+obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
new file mode 100644
index 00000000000..574a4aa8321
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile.boot
@@ -0,0 +1 @@
+   zreladdr-y	:= 0x00008000
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
new file mode 100644
index 00000000000..e8caf58e004
--- /dev/null
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -0,0 +1,42 @@
+/*
+ *  linux/arch/arm/mach-mmp/aspenite.c
+ *
+ *  Support for the Marvell PXA168-based Aspenite and Zylonite2
+ *  Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static void __init common_init(void)
+{
+}
+
+MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
new file mode 100644
index 00000000000..2d9cc5a7122
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.c
@@ -0,0 +1,83 @@
+/*
+ *  linux/arch/arm/mach-mmp/clock.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-apbc.h>
+#include "clock.h"
+
+static void apbc_clk_enable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void apbc_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apbc_clk_ops = {
+	.enable		= apbc_clk_enable,
+	.disable	= apbc_clk_disable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		clk->ops->enable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		clk->ops->disable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	if (clk->ops->getrate)
+		rate = clk->ops->getrate(clk);
+	else
+		rate = clk->rate;
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
new file mode 100644
index 00000000000..ed967e78e6a
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/arch/arm/mach-mmp/clock.h
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <asm/clkdev.h>
+
+struct clkops {
+	void			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	unsigned long		(*getrate)(struct clk *);
+};
+
+struct clk {
+	const struct clkops	*ops;
+
+	void __iomem	*clk_rst;	/* clock reset control register */
+	int		fnclksel;	/* functional clock select (APBC) */
+	uint32_t	enable_val;	/* value for clock enable (APMU) */
+	unsigned long	rate;
+	int		enabled;
+};
+
+extern struct clkops apbc_clk_ops;
+
+#define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.fnclksel	= _fnclksel,			\
+		.rate		= _rate,			\
+		.ops		= &apbc_clk_ops,		\
+}
+
+#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APBC_##_reg,	\
+		.fnclksel	= _fnclksel,			\
+		.rate		= _rate,			\
+		.ops		= _ops,				\
+}
+
+#define APMU_CLK(_name, _reg, _eval, _rate)			\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.enable_val	= _eval,			\
+		.rate		= _rate,			\
+		.ops		= &apmu_clk_ops,		\
+}
+
+#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
+struct clk clk_##_name = {					\
+		.clk_rst	= (void __iomem *)APMU_##_reg,	\
+		.enable_val	= _eval,			\
+		.rate		= _rate,			\
+		.ops		= _ops,				\
+}
+
+#define INIT_CLKREG(_clk, _devname, _conname)			\
+	{							\
+		.clk		= _clk,				\
+		.dev_id		= _devname,			\
+		.con_id		= _conname,			\
+	}
+
+extern struct clk clk_pxa168_gpio;
+extern struct clk clk_pxa168_timers;
+
+extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
new file mode 100644
index 00000000000..e1e66c18b44
--- /dev/null
+++ b/arch/arm/mach-mmp/common.c
@@ -0,0 +1,37 @@
+/*
+ *  linux/arch/arm/mach-mmp/common.c
+ *
+ *  Code common to PXA168 processor lines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static struct map_desc standard_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
+		.virtual	= APB_VIRT_BASE,
+		.length		= APB_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
+		.virtual	= AXI_VIRT_BASE,
+		.length		= AXI_PHYS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init pxa_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
new file mode 100644
index 00000000000..bf7a6a492de
--- /dev/null
+++ b/arch/arm/mach-mmp/common.h
@@ -0,0 +1,11 @@
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+struct sys_timer;
+
+extern void timer_init(int irq);
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+
+extern void __init icu_init_irq(void);
+extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
new file mode 100644
index 00000000000..191d9dea873
--- /dev/null
+++ b/arch/arm/mach-mmp/devices.c
@@ -0,0 +1,69 @@
+/*
+ * linux/arch/arm/mach-mmp/devices.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/devices.h>
+
+int __init pxa_register_device(struct pxa_device_desc *desc,
+				void *data, size_t size)
+{
+	struct platform_device *pdev;
+	struct resource res[2 + MAX_RESOURCE_DMA];
+	int i, ret = 0, nres = 0;
+
+	pdev = platform_device_alloc(desc->drv_name, desc->id);
+	if (pdev == NULL)
+		return -ENOMEM;
+
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	memset(res, 0, sizeof(res));
+
+	if (desc->start != -1ul && desc->size > 0) {
+		res[nres].start	= desc->start;
+		res[nres].end	= desc->start + desc->size - 1;
+		res[nres].flags	= IORESOURCE_MEM;
+		nres++;
+	}
+
+	if (desc->irq != NO_IRQ) {
+		res[nres].start	= desc->irq;
+		res[nres].end	= desc->irq;
+		res[nres].flags	= IORESOURCE_IRQ;
+		nres++;
+	}
+
+	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
+		if (desc->dma[i] == 0)
+			break;
+
+		res[nres].start	= desc->dma[i];
+		res[nres].end	= desc->dma[i];
+		res[nres].flags	= IORESOURCE_DMA;
+	}
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret) {
+		platform_device_put(pdev);
+		return ret;
+	}
+
+	if (data && size) {
+		ret = platform_device_add_data(pdev, data, size);
+		if (ret) {
+			platform_device_put(pdev);
+			return ret;
+		}
+	}
+
+	return platform_device_add(pdev);
+}
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
new file mode 100644
index 00000000000..3254089a644
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/addr-map.h
+ *
+ *   Common address map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE		0xd4000000
+#define APB_VIRT_BASE		0xfe000000
+#define APB_PHYS_SIZE		0x00200000
+
+#define AXI_PHYS_BASE		0xd4200000
+#define AXI_VIRT_BASE		0xfe200000
+#define AXI_PHYS_SIZE		0x00200000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE	0x80000000
+#define SMC_CS0_PHYS_SIZE	0x10000000
+#define SMC_CS1_PHYS_BASE	0x90000000
+#define SMC_CS1_PHYS_SIZE	0x10000000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h
new file mode 100644
index 00000000000..2fb354e54e0
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
new file mode 100644
index 00000000000..4ceed7a5075
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_CPUTYPE_H
+#define __ASM_MACH_CPUTYPE_H
+
+#include <asm/cputype.h>
+
+/*
+ *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
+ *
+ * PXA168    A0    0x41159263   0x56158400   0x00A0A333
+ */
+
+#ifdef CONFIG_CPU_PXA168
+#  define __cpu_is_pxa168(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+#else
+#  define __cpu_is_pxa168(id)	(0)
+#endif
+
+#define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
+
+#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
new file mode 100644
index 00000000000..a850f87de51
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-mmp/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copied from arch/arm/mach-pxa/include/mach/debug.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/addr-map.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =APB_PHYS_BASE		@ physical
+		ldrne	\rx, =APB_VIRT_BASE		@ virtual
+		orr	\rx, \rx, #0x00017000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
new file mode 100644
index 00000000000..bc03388d5fd
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -0,0 +1,27 @@
+#include <linux/types.h>
+
+#define MAX_RESOURCE_DMA	2
+
+/* structure for describing the on-chip devices */
+struct pxa_device_desc {
+	const char	*dev_name;
+	const char	*drv_name;
+	int		id;
+	int		irq;
+	unsigned long	start;
+	unsigned long	size;
+	int		dma[MAX_RESOURCE_DMA];
+};
+
+#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc pxa168_device_##_name __initdata = {		\
+	.dev_name	= "pxa168-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_PXA168_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+};
+
+extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
new file mode 100644
index 00000000000..1d6914544da
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/dma.h
@@ -0,0 +1,13 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/dma.h
+ */
+
+#ifndef __ASM_MACH_DMA_H
+#define __ASM_MACH_DMA_H
+
+#include <mach/addr-map.h>
+
+#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
+
+#include <plat/dma.h>
+#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
new file mode 100644
index 00000000000..6d3cd35478b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-icu.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =ICU_AP_IRQ_SEL_INT_NUM
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\tmp, [\base, #0]
+	and	\irqnr, \tmp, #0x3f
+	tst	\tmp, #(1 << 6)
+	.endm
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
new file mode 100644
index 00000000000..99264a5ce5e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/hardware.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h
new file mode 100644
index 00000000000..e7adf3d012c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/io.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
new file mode 100644
index 00000000000..91ecb3fbca0
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+/*
+ * Interrupt numbers for PXA168
+ */
+#define IRQ_PXA168_NONE			(-1)
+#define IRQ_PXA168_SSP3			0
+#define IRQ_PXA168_SSP2			1
+#define IRQ_PXA168_SSP1			2
+#define IRQ_PXA168_SSP0			3
+#define IRQ_PXA168_PMIC_INT		4
+#define IRQ_PXA168_RTC_INT		5
+#define IRQ_PXA168_RTC_ALARM		6
+#define IRQ_PXA168_TWSI0		7
+#define IRQ_PXA168_GPU			8
+#define IRQ_PXA168_KEYPAD		9
+#define IRQ_PXA168_ONEWIRE		12
+#define IRQ_PXA168_TIMER1		13
+#define IRQ_PXA168_TIMER2		14
+#define IRQ_PXA168_TIMER3		15
+#define IRQ_PXA168_CMU			16
+#define IRQ_PXA168_SSP4			17
+#define IRQ_PXA168_MSP_WAKEUP		19
+#define IRQ_PXA168_CF_WAKEUP		20
+#define IRQ_PXA168_XD_WAKEUP		21
+#define IRQ_PXA168_MFU			22
+#define IRQ_PXA168_MSP			23
+#define IRQ_PXA168_CF			24
+#define IRQ_PXA168_XD			25
+#define IRQ_PXA168_DDR_INT		26
+#define IRQ_PXA168_UART1		27
+#define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_FRQ_CHANGE		38
+#define IRQ_PXA168_SDH1			39
+#define IRQ_PXA168_SDH2			40
+#define IRQ_PXA168_LCD			41
+#define IRQ_PXA168_CI			42
+#define IRQ_PXA168_USB1			44
+#define IRQ_PXA168_NAND			45
+#define IRQ_PXA168_HIFI_DMA		46
+#define IRQ_PXA168_DMA_INT0		47
+#define IRQ_PXA168_DMA_INT1		48
+#define IRQ_PXA168_GPIOX		49
+#define IRQ_PXA168_USB2			51
+#define IRQ_PXA168_AC97			57
+#define IRQ_PXA168_TWSI1		58
+#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_SM_INT		63
+
+#define IRQ_GPIO_START			64
+#define IRQ_GPIO_NUM			128
+#define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
+
+#define NR_IRQS		(IRQ_GPIO_START + IRQ_GPIO_NUM)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
new file mode 100644
index 00000000000..bdb21d70714
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
new file mode 100644
index 00000000000..ef0a8a2076e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA168_H
+#define __ASM_MACH_PXA168_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa168_device_uart1;
+extern struct pxa_device_desc pxa168_device_uart2;
+
+static inline int pxa168_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_uart1; break;
+	case 2: d = &pxa168_device_uart2; break;
+	}
+
+	if (d == NULL)
+		return -EINVAL;
+
+	return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
new file mode 100644
index 00000000000..e0ffae59487
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
+ *
+ *   Application Peripheral Bus Clock Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APBC_H
+#define __ASM_MACH_REGS_APBC_H
+
+#include <mach/addr-map.h>
+
+#define APBC_VIRT_BASE	(APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x)	(APBC_VIRT_BASE + (x))
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_PXA168_UART1	APBC_REG(0x000)
+#define APBC_PXA168_UART2	APBC_REG(0x004)
+#define APBC_PXA168_GPIO	APBC_REG(0x008)
+#define APBC_PXA168_PWM0	APBC_REG(0x00c)
+#define APBC_PXA168_PWM1	APBC_REG(0x010)
+#define APBC_PXA168_SSP1	APBC_REG(0x01c)
+#define APBC_PXA168_SSP2	APBC_REG(0x020)
+#define APBC_PXA168_RTC		APBC_REG(0x028)
+#define APBC_PXA168_TWSI0	APBC_REG(0x02c)
+#define APBC_PXA168_KPC		APBC_REG(0x030)
+#define APBC_PXA168_TIMERS	APBC_REG(0x034)
+#define APBC_PXA168_AIB		APBC_REG(0x03c)
+#define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
+#define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
+#define APBC_PXA168_SSP3	APBC_REG(0x04c)
+#define APBC_PXA168_ASFAR	APBC_REG(0x050)
+#define APBC_PXA168_ASSAR	APBC_REG(0x054)
+#define APBC_PXA168_SSP4	APBC_REG(0x058)
+#define APBC_PXA168_SSP5	APBC_REG(0x05c)
+#define APBC_PXA168_TWSI1	APBC_REG(0x06c)
+#define APBC_PXA168_UART3	APBC_REG(0x070)
+#define APBC_PXA168_AC97	APBC_REG(0x084)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
+#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
+#define APBC_RST	(1 << 2)  /* Reset Generation */
+
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
+
+#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
new file mode 100644
index 00000000000..91903051412
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
+ *
+ *   Application Subsystem Power Management Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APMU_H
+#define __ASM_MACH_REGS_APMU_H
+
+#include <mach/addr-map.h>
+
+#define APMU_VIRT_BASE	(AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x)	(APMU_VIRT_BASE + (x))
+
+/* Clock Reset Control */
+#define APMU_IRE	APMU_REG(0x048)
+#define APMU_LCD	APMU_REG(0x04c)
+#define APMU_CCIC	APMU_REG(0x050)
+#define APMU_SDH0	APMU_REG(0x054)
+#define APMU_SDH1	APMU_REG(0x058)
+#define APMU_USB	APMU_REG(0x05c)
+#define APMU_NAND	APMU_REG(0x060)
+#define APMU_DMA	APMU_REG(0x064)
+#define APMU_GEU	APMU_REG(0x068)
+#define APMU_BUS	APMU_REG(0x06c)
+
+#define APMU_FNCLK_EN	(1 << 4)
+#define APMU_AXICLK_EN	(1 << 3)
+#define APMU_FNRST_DIS	(1 << 1)
+#define APMU_AXIRST_DIS	(1 << 0)
+
+#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
new file mode 100644
index 00000000000..e5f08723e0c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
+ *
+ *   Interrupt Control Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ICU_H
+#define __ASM_MACH_ICU_H
+
+#include <mach/addr-map.h>
+
+#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
+#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
+
+#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
+#define ICU_INT_CONF_AP_INT	(1 << 6)
+#define ICU_INT_CONF_CP_INT	(1 << 5)
+#define ICU_INT_CONF_IRQ	(1 << 4)
+#define ICU_INT_CONF_MASK	(0xf)
+
+#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
+#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
+#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
+#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
+#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
+
+#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/include/mach/regs-timers.h
new file mode 100644
index 00000000000..45589fec9fc
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-timers.h
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
+ *
+ *   Timers Module
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#include <mach/addr-map.h>
+
+#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
+#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
+
+#define TMR_CCR		(0x0000)
+#define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n)	(0x0028 + ((n) << 2))
+#define TMR_SR(n)	(0x0034 + ((n) << 2))
+#define TMR_IER(n)	(0x0040 + ((n) << 2))
+#define TMR_PLVR(n)	(0x004c + ((n) << 2))
+#define TMR_PLCR(n)	(0x0058 + ((n) << 2))
+#define TMR_WMER	(0x0064)
+#define TMR_WMR		(0x0068)
+#define TMR_WVR		(0x006c)
+#define TMR_WSR		(0x0070)
+#define TMR_ICR(n)	(0x0074 + ((n) << 2))
+#define TMR_WICR	(0x0080)
+#define TMR_CER		(0x0084)
+#define TMR_CMR		(0x0088)
+#define TMR_ILR(n)	(0x008c + ((n) << 2))
+#define TMR_WCR		(0x0098)
+#define TMR_WFAR	(0x009c)
+#define TMR_WSAR	(0x00A0)
+#define TMR_CVWR(n)	(0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x)	(((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x)	(((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x)	(((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
new file mode 100644
index 00000000000..001edfefec1
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_SYSTEM_H
+#define __ASM_MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
new file mode 100644
index 00000000000..6cebbd0ca8f
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE		3250000
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
new file mode 100644
index 00000000000..c93d5fa5865
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-mmp/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/addr-map.h>
+
+#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
+#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
+#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
+
+static inline void putc(char c)
+{
+	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
+	/* UART enabled? */
+	if (!(UART[UART_IER] & UART_IER_UUE))
+		return;
+
+	while (!(UART[UART_LSR] & UART_LSR_THRE))
+		barrier();
+
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b60ccaf9fee
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 00000000000..52ff2f065eb
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,55 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:	Bin Yang <bin.yang@marvell.com>
+ *  Created:	Sep 30, 2008
+ *  Copyright:	Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
+
+#define PRIORITY_DEFAULT	0x1
+#define PRIORITY_NONE		0x0	/* means IRQ disabled */
+
+static void icu_mask_irq(unsigned int irq)
+{
+	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name	= "icu_irq",
+	.ack	= icu_mask_irq,
+	.mask	= icu_mask_irq,
+	.unmask	= icu_unmask_irq,
+};
+
+void __init icu_init_irq(void)
+{
+	int irq;
+
+	for (irq = 0; irq < 64; irq++) {
+		icu_mask_irq(irq);
+		set_irq_chip(irq, &icu_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
new file mode 100644
index 00000000000..1935c754511
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -0,0 +1,77 @@
+/*
+ *  linux/arch/arm/mach-mmp/pxa168.c
+ *
+ *  Code specific to PXA168
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/cputype.h>
+#include <mach/regs-apbc.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+void __init pxa168_init_irq(void)
+{
+	icu_init_irq();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
+static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa168_init(void)
+{
+	if (cpu_is_pxa168()) {
+		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
+		clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(pxa168_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa168_timer_init(void)
+{
+	/* this is early, we have to initialize the CCU registers by
+	 * ourselves instead of using clk_* API. Clock rate is defined
+	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
+	 */
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+
+	/* 3.25MHz, bus/functional clock enabled, release reset */
+	__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+
+	timer_init(IRQ_PXA168_TIMER1);
+}
+
+struct sys_timer pxa168_timer = {
+	.init	= pxa168_timer_init,
+};
+
+/* on-chip devices */
+PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
+PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
new file mode 100644
index 00000000000..b03a6eda741
--- /dev/null
+++ b/arch/arm/mach-mmp/time.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ *   Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
+ *   2008-10-08: Bin Yang <bin.yang@marvell.com>
+ *
+ * The timers module actually includes three timers, each timer with upto
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-timers.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+
+#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
+
+#define MAX_DELTA		(0xfffffffe)
+#define MIN_DELTA		(16)
+
+#define TCR2NS_SCALE_FACTOR	10
+
+static unsigned long tcr2ns_scale;
+
+static void __init set_tcr2ns_scale(unsigned long tcr_rate)
+{
+	unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
+	do_div(v, tcr_rate);
+	tcr2ns_scale = v;
+	/*
+	 * We want an even value to automatically clear the top bit
+	 * returned by cnt32_to_63() without an additional run time
+	 * instruction. So if the LSB is 1 then round it up.
+	 */
+	if (tcr2ns_scale & 1)
+		tcr2ns_scale++;
+}
+
+/*
+ * FIXME: the timer needs some delay to stablize the counter capture
+ */
+static inline uint32_t timer_read(void)
+{
+	int delay = 100;
+
+	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+
+	while (delay--)
+		cpu_relax();
+
+	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(timer_read());
+	return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* disable and clear pending interrupt status */
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+	c->event_handler(c);
+	return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	unsigned long flags, next;
+
+	local_irq_save(flags);
+
+	/* clear pending interrupt status and enable */
+	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+
+	next = timer_read() + delta;
+	__raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/* disable the matching interrupt */
+		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	}
+	local_irq_restore(flags);
+}
+
+static struct clock_event_device ckevt = {
+	.name		= "clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 200,
+	.set_next_event	= timer_set_next_event,
+	.set_mode	= timer_set_mode,
+};
+
+static cycle_t clksrc_read(void)
+{
+	return timer_read();
+}
+
+static struct clocksource cksrc = {
+	.name		= "clocksource",
+	.shift		= 20,
+	.rating		= 200,
+	.read		= clksrc_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+	uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
+	uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
+
+	__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+
+	ccr &= TMR_CCR_CS_0(0x3);
+	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+
+	/* free-running mode */
+	__raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+
+	/* enable timer counter */
+	__raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+}
+
+static struct irqaction timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= timer_interrupt,
+	.dev_id		= &ckevt,
+};
+
+void __init timer_init(int irq)
+{
+	timer_config();
+
+	set_tcr2ns_scale(CLOCK_TICK_RATE);
+
+	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
+	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
+	ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
+	ckevt.cpumask = cpumask_of(0);
+
+	cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
+
+	setup_irq(irq, &timer_irq);
+
+	clocksource_register(&cksrc);
+	clockevents_register_device(&ckevt);
+}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f3773c0..64086f4f5fc 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -340,6 +340,17 @@ config CPU_XSC3
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
+# Marvell PJ1 (Mohawk)
+config CPU_MOHAWK
+	bool
+	select CPU_32v5
+	select CPU_ABRT_EV5T
+	select CPU_PABRT_NOIFAR
+	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
+	select CPU_TLB_V4WBI if MMU
+	select CPU_COPY_V4WB if MMU
+
 # Feroceon
 config CPU_FEROCEON
 	bool
@@ -569,7 +580,7 @@ comment "Processor Features"
 
 config ARM_THUMB
 	bool "Support Thumb user binaries"
-	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
+	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
 	default y
 	help
 	  Say Y if you want to include kernel support for running user space
@@ -653,7 +664,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
+	depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a3611..64149d9e55a 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
+obj-$(CONFIG_CPU_MOHAWK)	+= proc-mohawk.o
 obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
new file mode 100644
index 00000000000..540f5078496
--- /dev/null
+++ b/arch/arm/mm/proc-mohawk.S
@@ -0,0 +1,416 @@
+/*
+ *  linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
+ *
+ *  PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
+ *
+ *  Heavily based on proc-arm926.S and proc-xsc3.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed.  If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define CACHE_DLIMIT	32768
+
+/*
+ * The cache line size of the L1 D cache.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * cpu_mohawk_proc_init()
+ */
+ENTRY(cpu_mohawk_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_proc_fin()
+ */
+ENTRY(cpu_mohawk_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	mohawk_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1800			@ ...iz...........
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_mohawk_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * (same as arm926)
+ */
+	.align	5
+ENTRY(cpu_mohawk_reset)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x0007			@ .............cam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	mov	pc, r0
+
+/*
+ * cpu_mohawk_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+	.align	5
+ENTRY(cpu_mohawk_do_idle)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Clean and invalidate all cache entries in a particular
+ *	address space.
+ */
+ENTRY(mohawk_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(mohawk_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcrne	p15, 0, ip, c7, c10, 0		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Clean and invalidate a range of cache entries in the
+ *	specified address range.
+ *
+ *	- start	- start address (inclusive)
+ *	- end	- end address (exclusive)
+ *	- flags	- vm_flags describing address space
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT
+	bgt	__flush_whole_cache
+1:	tst	r2, #VM_EXEC
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(mohawk_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start, end.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_coherent_user_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(mohawk_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_inv_range)
+	tst	r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_clean_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start	- virtual start address
+ *	- end	- virtual end address
+ */
+ENTRY(mohawk_dma_flush_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+ENTRY(mohawk_cache_fns)
+	.long	mohawk_flush_kern_cache_all
+	.long	mohawk_flush_user_cache_all
+	.long	mohawk_flush_user_cache_range
+	.long	mohawk_coherent_kern_range
+	.long	mohawk_coherent_user_range
+	.long	mohawk_flush_kern_dcache_page
+	.long	mohawk_dma_inv_range
+	.long	mohawk_dma_clean_range
+	.long	mohawk_dma_flush_range
+
+ENTRY(cpu_mohawk_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_mohawk_switch_mm)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	orr	r0, r0, #0x18			@ cache the page table in L2
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, lr
+
+/*
+ * cpu_mohawk_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	5
+ENTRY(cpu_mohawk_set_pte_ext)
+	armv3_set_pte_ext
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+	__INIT
+
+	.type	__mohawk_setup, #function
+__mohawk_setup:
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs
+	orr	r4, r4, #0x18			@ cache the page table in L2
+	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+
+	mov	r0, #0				@ don't allow CP access
+	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
+
+	adr	r5, mohawk_crval
+	ldmia	r5, {r5, r6}
+	mrc	p15, 0, r0, c1, c0		@ get control register
+	bic	r0, r0, r5
+	orr	r0, r0, r6
+	mov	pc, lr
+
+	.size	__mohawk_setup, . - __mohawk_setup
+
+	/*
+	 *  R
+	 * .RVI ZFRS BLDP WCAM
+	 * .011 1001 ..00 0101
+	 *
+	 */
+	.type	mohawk_crval, #object
+mohawk_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	mohawk_processor_functions, #object
+mohawk_processor_functions:
+	.word	v5t_early_abort
+	.word	pabort_noifar
+	.word	cpu_mohawk_proc_init
+	.word	cpu_mohawk_proc_fin
+	.word	cpu_mohawk_reset
+	.word	cpu_mohawk_do_idle
+	.word	cpu_mohawk_dcache_clean_area
+	.word	cpu_mohawk_switch_mm
+	.word	cpu_mohawk_set_pte_ext
+	.size	mohawk_processor_functions, . - mohawk_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5te"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_mohawk_name, #object
+cpu_mohawk_name:
+	.asciz	"Marvell 88SV331x"
+	.size	cpu_mohawk_name, . - cpu_mohawk_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+
+	.type	__88sv331x_proc_info,#object
+__88sv331x_proc_info:
+	.long	0x56158000			@ Marvell 88SV331x (MOHAWK)
+	.long	0xfffff000
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__mohawk_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_mohawk_name
+	.long	mohawk_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	v4wb_user_fns
+	.long	mohawk_cache_fns
+	.size	__88sv331x_proc_info, . - __88sv331x_proc_info
-- 
cgit v1.2.3


From 40305a583a3e080a8d1aa126fa810480ec8cbabd Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 26 Feb 2009 09:34:35 +0800
Subject: [ARM] pxa: add iWMMXt support for pxa168

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig         | 4 ++--
 arch/arm/kernel/Makefile | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fdcd2d54e93..5385d8743c6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -712,8 +712,8 @@ source arch/arm/mm/Kconfig
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3
-	default y if PXA27x || PXA3xx
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ca60d335e8f..11a5197a221 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -36,6 +36,7 @@ AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
+obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
-- 
cgit v1.2.3


From e2bb6650ef94c64723e2dd35ab92410b9477bc64 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 14:38:24 +0800
Subject: [ARM] pxa: add GPIO support for pxa168

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig                      |  2 ++
 arch/arm/mach-mmp/include/mach/gpio.h | 36 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-mmp/pxa168.c            | 19 ++++++++++++++++++
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm/mach-mmp/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5385d8743c6..daf35d77820 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -490,6 +490,8 @@ config ARCH_PXA
 config ARCH_MMP
 	bool "Marvell PXA168"
 	depends on MMU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
new file mode 100644
index 00000000000..ab26d13295c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_MACH_GPIO_H
+#define __ASM_MACH_GPIO_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+#include <asm-generic/gpio.h>
+
+#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO	(128)
+
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+#define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
+#define irq_to_gpio(irq)	((irq) - IRQ_GPIO_START)
+
+
+#define __gpio_is_inverted(gpio)	(0)
+#define __gpio_is_occupied(gpio)	(0)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
+
+#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio.h>
+#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 1935c754511..1774682e988 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/list.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 
 #include <asm/mach/time.h>
@@ -19,15 +20,33 @@
 #include <mach/cputype.h>
 #include <mach/regs-apbc.h>
 #include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <mach/dma.h>
 #include <mach/devices.h>
 
 #include "common.h"
 #include "clock.h"
 
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa168_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
+
+	/* unmask GPIO edge detection for all 4 banks - APMASKx */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
+}
+
 void __init pxa168_init_irq(void)
 {
 	icu_init_irq();
+	pxa168_init_gpio();
 }
 
 /* APB peripheral clocks */
-- 
cgit v1.2.3


From a7a89d9621ba877ae45784cf7d000182075df9c1 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 20 Jan 2009 17:20:56 +0800
Subject: [ARM] pxa: add MFP support for pxa168

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 258 ++++++++++++++++++++++++++++
 arch/arm/mach-mmp/include/mach/mfp.h        |  37 ++++
 arch/arm/mach-mmp/pxa168.c                  |  15 ++
 3 files changed, 310 insertions(+)
 create mode 100644 arch/arm/mach-mmp/include/mach/mfp-pxa168.h
 create mode 100644 arch/arm/mach-mmp/include/mach/mfp.h

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
new file mode 100644
index 00000000000..d0bdb6e3682
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_MACH_MFP_PXA168_H
+#define __ASM_MACH_MFP_PXA168_H
+
+#include <mach/mfp.h>
+
+/* GPIO */
+#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
+#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
+#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
+#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
+#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
+#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
+#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
+#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
+#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
+#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
+#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
+#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
+#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
+#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
+#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
+#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
+#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
+#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
+#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
+#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
+#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
+#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
+#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
+#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
+#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
+#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
+#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
+#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
+#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
+#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
+#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
+
+/* DFI */
+#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
+#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
+#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
+#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
+#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
+#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
+#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
+#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
+#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
+#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
+#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
+#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
+#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
+#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
+#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
+#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
+
+#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
+#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
+#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
+#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
+
+/* NAND */
+#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
+#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
+#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
+#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
+#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
+#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
+
+/* Static Memory Controller */
+#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
+#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
+#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
+#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
+#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
+#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
+#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
+#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
+#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
+#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
+#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
+#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
+#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
+#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
+
+/* Compact Flash */
+#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
+#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
+#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
+#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
+#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
+#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
+#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
+#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
+#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
+#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
+
+/* UART1 */
+#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
+#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
+#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
+#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
+#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
+#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
+#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
+#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
+#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
+#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
+#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
+#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
+
+/* MMC1 */
+#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
+#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
+#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
+#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
+#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
+#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
+#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
+#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
+#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
+#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
+#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
+#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
+
+/* LCD */
+#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
+#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
+#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
+#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
+#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
+#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
+#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
+#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
+#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
+#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
+#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
+#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
+#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
+#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
+#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
+#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
+#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
+#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
+#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
+#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
+#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
+#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
+#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
+#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
+#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
+#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
+#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
+#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
+
+/* I2S */
+#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113,AF6)
+#define GPIO114_I2S_FRM		MFP_CFG(GPIO114,AF1)
+#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115,AF1)
+#define GPIO116_I2S_RXD		MFP_CFG(GPIO116,AF2)
+#define GPIO117_I2S_TXD		MFP_CFG(GPIO117,AF2)
+
+#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h
new file mode 100644
index 00000000000..277ea4cd0f9
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_MACH_MFP_H
+#define __ASM_MACH_MFP_H
+
+#include <plat/mfp.h>
+
+/*
+ * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
+ * bit different from those on PXA3xx.  Bit [7:10] are now reserved, which
+ * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
+ *
+ * To cope with this difference and re-use the pxa3xx mfp code as much as
+ * possible, we make the following compromise:
+ *
+ * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
+ * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 3. Override MFP_CFG() and MFP_CFG_DRV()
+ * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
+ */
+
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+#undef MFP_CFG_LPM
+#undef MFP_CFG_X
+#undef MFP_CFG_DEFAULT
+
+#define MFP_CFG(pin, af)		\
+	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
+#endif /* __ASM_MACH_MFP_H */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 1774682e988..ae924468658 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -23,10 +23,23 @@
 #include <mach/gpio.h>
 #include <mach/dma.h>
 #include <mach/devices.h>
+#include <mach/mfp.h>
 
 #include "common.h"
 #include "clock.h"
 
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
+{
+	MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
+	MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
+	MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
+	MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
+
+	MFP_ADDR_END,
+};
+
 #define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
 
 static void __init pxa168_init_gpio(void)
@@ -62,6 +75,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 static int __init pxa168_init(void)
 {
 	if (cpu_is_pxa168()) {
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(pxa168_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
 		clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
 	}
-- 
cgit v1.2.3


From 9c291f0f835dc8349afc21d6311cb531140f6977 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Tue, 10 Feb 2009 10:35:25 +0800
Subject: [ARM] pxa/aspenite: add support for console uart

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-mmp/aspenite.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index e8caf58e004..a9efa5cadbe 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -10,15 +10,27 @@
  */
 
 #include <linux/init.h>
+#include <linux/kernel.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
 
 #include "common.h"
 
+static unsigned long common_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO107_UART1_RXD,
+	GPIO108_UART1_TXD,
+};
+
 static void __init common_init(void)
 {
+	mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	pxa168_add_uart(1);
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-- 
cgit v1.2.3


From a6b993c6b5183fe2af98569cbb7dd8add01b8deb Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Wed, 18 Feb 2009 16:38:22 +0800
Subject: [ARM] pxa/aspenite: add support for debug ethernet

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-mmp/aspenite.c | 63 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index a9efa5cadbe..4562452d407 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -11,26 +11,89 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
+#include <mach/gpio.h>
 
 #include "common.h"
 
 static unsigned long common_pin_config[] __initdata = {
+	/* Data Flash Interface */
+	GPIO0_DFI_D15,
+	GPIO1_DFI_D14,
+	GPIO2_DFI_D13,
+	GPIO3_DFI_D12,
+	GPIO4_DFI_D11,
+	GPIO5_DFI_D10,
+	GPIO6_DFI_D9,
+	GPIO7_DFI_D8,
+	GPIO8_DFI_D7,
+	GPIO9_DFI_D6,
+	GPIO10_DFI_D5,
+	GPIO11_DFI_D4,
+	GPIO12_DFI_D3,
+	GPIO13_DFI_D2,
+	GPIO14_DFI_D1,
+	GPIO15_DFI_D0,
+
+	/* Static Memory Controller */
+	GPIO18_SMC_nCS0,
+	GPIO34_SMC_nCS1,
+	GPIO23_SMC_nLUA,
+	GPIO25_SMC_nLLA,
+	GPIO28_SMC_RDY,
+	GPIO29_SMC_SCLK,
+	GPIO35_SMC_BE1,
+	GPIO36_SMC_BE2,
+	GPIO27_GPIO,	/* Ethernet IRQ */
+
 	/* UART1 */
 	GPIO107_UART1_RXD,
 	GPIO108_UART1_TXD,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= SMC_CS1_PHYS_BASE + 0x300,
+		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(27),
+		.end	= gpio_to_irq(27),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+	/* on-chip devices */
 	pxa168_add_uart(1);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-- 
cgit v1.2.3


From 14c6b5e7add9ec393ad61bceb6106b47c7f14bd3 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 20 Mar 2009 12:50:22 +0800
Subject: [ARM] pxa: add base support for Marvell PXA910

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/Kconfig                            |   4 +-
 arch/arm/mach-mmp/Kconfig                   |   8 +-
 arch/arm/mach-mmp/Makefile                  |   1 +
 arch/arm/mach-mmp/common.h                  |   2 +
 arch/arm/mach-mmp/include/mach/cputype.h    |   9 ++
 arch/arm/mach-mmp/include/mach/devices.h    |  10 ++
 arch/arm/mach-mmp/include/mach/irqs.h       |  61 +++++++++++
 arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 157 +++++++++++++++++++++++++++
 arch/arm/mach-mmp/include/mach/pxa910.h     |  23 ++++
 arch/arm/mach-mmp/include/mach/regs-apbc.h  |  25 +++++
 arch/arm/mach-mmp/pxa910.c                  | 158 ++++++++++++++++++++++++++++
 arch/arm/plat-pxa/include/plat/mfp.h        |  30 ++++++
 12 files changed, 485 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-mmp/include/mach/mfp-pxa910.h
 create mode 100644 arch/arm/mach-mmp/include/mach/pxa910.h
 create mode 100644 arch/arm/mach-mmp/pxa910.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index daf35d77820..cb4486ad0f7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -488,7 +488,7 @@ config ARCH_PXA
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_MMP
-	bool "Marvell PXA168"
+	bool "Marvell PXA168/910"
 	depends on MMU
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
@@ -499,7 +499,7 @@ config ARCH_MMP
 	select TICK_ONESHOT
 	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168 processor line.
+	  Support for Marvell's PXA168/910 processor line.
 
 config ARCH_RPC
 	bool "RiscPC"
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index b5232676355..ba2e377484f 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MMP
 
-menu "Marvell PXA168 Implmentations"
+menu "Marvell PXA168/910 Implmentations"
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
@@ -24,4 +24,10 @@ config CPU_PXA168
 	help
 	  Select code specific to PXA168
 
+config CPU_PXA910
+	bool
+	select CPU_MOHAWK
+	help
+	  Select code specific to PXA910
+
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 0ac7644ec99..93d2bc7459d 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -6,6 +6,7 @@ obj-y				+= common.o clock.o devices.o irq.o time.o
 
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index bf7a6a492de..c33fbbc4941 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -5,7 +5,9 @@ struct sys_timer;
 extern void timer_init(int irq);
 
 extern struct sys_timer pxa168_timer;
+extern struct sys_timer pxa910_timer;
 extern void __init pxa168_init_irq(void);
+extern void __init pxa910_init_irq(void);
 
 extern void __init icu_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 4ceed7a5075..25e797b0908 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -7,6 +7,7 @@
  *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
  *
  * PXA168    A0    0x41159263   0x56158400   0x00A0A333
+ * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
  */
 
 #ifdef CONFIG_CPU_PXA168
@@ -16,6 +17,14 @@
 #  define __cpu_is_pxa168(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA910
+#  define __cpu_is_pxa910(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+#else
+#  define __cpu_is_pxa910(id)	(0)
+#endif
+
 #define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
+#define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
 
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index bc03388d5fd..24585397217 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -24,4 +24,14 @@ struct pxa_device_desc pxa168_device_##_name __initdata = {		\
 	.dma		= { _dma },					\
 };
 
+#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc pxa910_device_##_name __initdata = {		\
+	.dev_name	= "pxa910-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_PXA910_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+};
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index 91ecb3fbca0..e83e45ebf7a 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -49,6 +49,67 @@
 #define IRQ_PXA168_PMU			60
 #define IRQ_PXA168_SM_INT		63
 
+/*
+ * Interrupt numbers for PXA910
+ */
+#define IRQ_PXA910_AIRQ			0
+#define IRQ_PXA910_SSP3			1
+#define IRQ_PXA910_SSP2			2
+#define IRQ_PXA910_SSP1			3
+#define IRQ_PXA910_PMIC_INT		4
+#define IRQ_PXA910_RTC_INT		5
+#define IRQ_PXA910_RTC_ALARM		6
+#define IRQ_PXA910_TWSI0		7
+#define IRQ_PXA910_GPU			8
+#define IRQ_PXA910_KEYPAD		9
+#define IRQ_PXA910_ROTARY		10
+#define IRQ_PXA910_TRACKBALL		11
+#define IRQ_PXA910_ONEWIRE		12
+#define IRQ_PXA910_AP1_TIMER1		13
+#define IRQ_PXA910_AP1_TIMER2		14
+#define IRQ_PXA910_AP1_TIMER3		15
+#define IRQ_PXA910_IPC_AP0		16
+#define IRQ_PXA910_IPC_AP1		17
+#define IRQ_PXA910_IPC_AP2		18
+#define IRQ_PXA910_IPC_AP3		19
+#define IRQ_PXA910_IPC_AP4		20
+#define IRQ_PXA910_IPC_CP0		21
+#define IRQ_PXA910_IPC_CP1		22
+#define IRQ_PXA910_IPC_CP2		23
+#define IRQ_PXA910_IPC_CP3		24
+#define IRQ_PXA910_IPC_CP4		25
+#define IRQ_PXA910_L2_DDR		26
+#define IRQ_PXA910_UART2		27
+#define IRQ_PXA910_UART3		28
+#define IRQ_PXA910_AP2_TIMER1		29
+#define IRQ_PXA910_AP2_TIMER2		30
+#define IRQ_PXA910_CP2_TIMER1		31
+#define IRQ_PXA910_CP2_TIMER2		32
+#define IRQ_PXA910_CP2_TIMER3		33
+#define IRQ_PXA910_GSSP			34
+#define IRQ_PXA910_CP2_WDT		35
+#define IRQ_PXA910_MAIN_PMU		36
+#define IRQ_PXA910_CP_FREQ_CHG		37
+#define IRQ_PXA910_AP_FREQ_CHG		38
+#define IRQ_PXA910_MMC			39
+#define IRQ_PXA910_AEU			40
+#define IRQ_PXA910_LCD			41
+#define IRQ_PXA910_CCIC			42
+#define IRQ_PXA910_IRE			43
+#define IRQ_PXA910_USB1			44
+#define IRQ_PXA910_NAND			45
+#define IRQ_PXA910_HIFI_DMA		46
+#define IRQ_PXA910_DMA_INT0		47
+#define IRQ_PXA910_DMA_INT1		48
+#define IRQ_PXA910_AP_GPIO		49
+#define IRQ_PXA910_AP2_TIMER3		50
+#define IRQ_PXA910_USB2			51
+#define IRQ_PXA910_TWSI1		54
+#define IRQ_PXA910_CP_GPIO		55
+#define IRQ_PXA910_UART1		59	/* Slow UART */
+#define IRQ_PXA910_AP_PMU		60
+#define IRQ_PXA910_SM_INT		63	/* from PinMux */
+
 #define IRQ_GPIO_START			64
 #define IRQ_GPIO_NUM			128
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
new file mode 100644
index 00000000000..48a1cbc7c56
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -0,0 +1,157 @@
+#ifndef __ASM_MACH_MFP_PXA910_H
+#define __ASM_MACH_MFP_PXA910_H
+
+#include <mach/mfp.h>
+
+/* UART2 */
+#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
+#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
+
+/* UART3 */
+#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
+#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
+
+/*IRDA*/
+#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
+
+/* SMC */
+#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
+#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
+#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
+#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
+#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
+#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
+
+/* I2C */
+#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
+#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
+
+/* SSP1 (I2S) */
+#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
+#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
+#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
+#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
+#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
+#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
+#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
+
+/* DFI */
+#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
+#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
+#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
+#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
+#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
+#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
+#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
+#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
+#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
+#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
+#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
+#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
+#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
+#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
+#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
+#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
+#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
+#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
+#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
+#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
+#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
+#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
+
+/*keypad*/
+#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
+
+/* LCD */
+#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
+#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
+#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
+#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
+#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
+#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
+#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
+#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
+#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
+#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
+#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
+#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
+#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
+#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
+#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
+#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
+#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
+#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
+#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
+#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
+#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
+#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
+#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
+#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
+#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
+#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
+
+#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
+#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
+#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
+#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
+
+#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
+
+/*smart panel*/
+#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
+#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
+#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
+
+/*1wire*/
+#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
+
+/*CCIC*/
+#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
+#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
+#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
+#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
+#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
+#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
+#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
+#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
+#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
+#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
+#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
+#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
+
+/* MMC1 */
+#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
+#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
+#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
+#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
+#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
+#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
+#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
+#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
+#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
+#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
+#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
+#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+
+#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
new file mode 100644
index 00000000000..b7aeaf574c3
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA910_H
+#define __ASM_MACH_PXA910_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa910_device_uart1;
+extern struct pxa_device_desc pxa910_device_uart2;
+
+static inline int pxa910_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa910_device_uart1; break;
+	case 2: d = &pxa910_device_uart2; break;
+	}
+
+	if (d == NULL)
+		return -EINVAL;
+
+	return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index e0ffae59487..c6b8c9dc202 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -42,6 +42,31 @@
 #define APBC_PXA168_UART3	APBC_REG(0x070)
 #define APBC_PXA168_AC97	APBC_REG(0x084)
 
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_PXA910_UART0	APBC_REG(0x000)
+#define APBC_PXA910_UART1	APBC_REG(0x004)
+#define APBC_PXA910_GPIO	APBC_REG(0x008)
+#define APBC_PXA910_PWM0	APBC_REG(0x00c)
+#define APBC_PXA910_PWM1	APBC_REG(0x010)
+#define APBC_PXA910_PWM2	APBC_REG(0x014)
+#define APBC_PXA910_PWM3	APBC_REG(0x018)
+#define APBC_PXA910_SSP1	APBC_REG(0x01c)
+#define APBC_PXA910_SSP2	APBC_REG(0x020)
+#define APBC_PXA910_IPC		APBC_REG(0x024)
+#define APBC_PXA910_TWSI0	APBC_REG(0x02c)
+#define APBC_PXA910_KPC		APBC_REG(0x030)
+#define APBC_PXA910_TIMERS	APBC_REG(0x034)
+#define APBC_PXA910_TBROT	APBC_REG(0x038)
+#define APBC_PXA910_AIB		APBC_REG(0x03c)
+#define APBC_PXA910_SW_JTAG	APBC_REG(0x040)
+#define APBC_PXA910_TIMERS1	APBC_REG(0x044)
+#define APBC_PXA910_ONEWIRE	APBC_REG(0x048)
+#define APBC_PXA910_SSP3	APBC_REG(0x04c)
+#define APBC_PXA910_ASFAR	APBC_REG(0x050)
+#define APBC_PXA910_ASSAR	APBC_REG(0x054)
+
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
new file mode 100644
index 00000000000..453f8f7758b
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -0,0 +1,158 @@
+/*
+ *  linux/arch/arm/mach-mmp/pxa910.c
+ *
+ *  Code specific to PXA910
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mfp.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
+{
+	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
+	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
+	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
+
+	MFP_ADDR(GPIO123, 0xcc),
+	MFP_ADDR(GPIO124, 0xd0),
+
+	MFP_ADDR(DF_IO0, 0x40),
+	MFP_ADDR(DF_IO1, 0x3c),
+	MFP_ADDR(DF_IO2, 0x38),
+	MFP_ADDR(DF_IO3, 0x34),
+	MFP_ADDR(DF_IO4, 0x30),
+	MFP_ADDR(DF_IO5, 0x2c),
+	MFP_ADDR(DF_IO6, 0x28),
+	MFP_ADDR(DF_IO7, 0x24),
+	MFP_ADDR(DF_IO8, 0x20),
+	MFP_ADDR(DF_IO9, 0x1c),
+	MFP_ADDR(DF_IO10, 0x18),
+	MFP_ADDR(DF_IO11, 0x14),
+	MFP_ADDR(DF_IO12, 0x10),
+	MFP_ADDR(DF_IO13, 0xc),
+	MFP_ADDR(DF_IO14, 0x8),
+	MFP_ADDR(DF_IO15, 0x4),
+
+	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
+	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
+	MFP_ADDR(SM_nCS0, 0x4c),
+	MFP_ADDR(SM_nCS1, 0x50),
+	MFP_ADDR(DF_WEn, 0x54),
+	MFP_ADDR(DF_REn, 0x58),
+	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
+	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
+	MFP_ADDR(SM_SCLK, 0x64),
+	MFP_ADDR(DF_RDY0, 0x68),
+	MFP_ADDR(SM_BE0, 0x6c),
+	MFP_ADDR(SM_BE1, 0x70),
+	MFP_ADDR(SM_ADV, 0x74),
+	MFP_ADDR(DF_RDY1, 0x78),
+	MFP_ADDR(SM_ADVMUX, 0x7c),
+	MFP_ADDR(SM_RDY, 0x80),
+
+	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
+
+	MFP_ADDR_END,
+};
+
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa910_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
+
+	/* unmask GPIO edge detection for all 4 banks - APMASKx */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
+}
+
+void __init pxa910_init_irq(void)
+{
+	icu_init_irq();
+	pxa910_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
+static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa910_init(void)
+{
+	if (cpu_is_pxa910()) {
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(pxa910_mfp_addr_map);
+		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
+		clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(pxa910_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa910_timer_init(void)
+{
+	/* reset and configure */
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
+	__raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+
+	timer_init(IRQ_PXA910_AP1_TIMER1);
+}
+
+struct sys_timer pxa910_timer = {
+	.init	= pxa910_timer_init,
+};
+
+/* on-chip devices */
+
+/* NOTE: there are totally 3 UARTs on PXA910:
+ *
+ *   UART1   - Slow UART (can be used both by AP and CP)
+ *   UART2/3 - Fast UART
+ *
+ * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
+ * they are re-ordered as:
+ *
+ *   pxa910_device_uart1 - UART2 as FFUART
+ *   pxa910_device_uart2 - UART3 as BTUART
+ *
+ * UART1 is not used by AP for the moment.
+ */
+PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
+PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index a22229cde09..64019464c8d 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -209,6 +209,36 @@ enum {
 	MFP_PIN_DF_IO13,
 	MFP_PIN_DF_IO14,
 	MFP_PIN_DF_IO15,
+	MFP_PIN_DF_nCS0_SM_nCS2,
+	MFP_PIN_DF_nCS1_SM_nCS3,
+	MFP_PIN_SM_nCS0,
+	MFP_PIN_SM_nCS1,
+	MFP_PIN_DF_WEn,
+	MFP_PIN_DF_REn,
+	MFP_PIN_DF_CLE_SM_OEn,
+	MFP_PIN_DF_ALE_SM_WEn,
+	MFP_PIN_DF_RDY0,
+	MFP_PIN_DF_RDY1,
+
+	MFP_PIN_SM_SCLK,
+	MFP_PIN_SM_BE0,
+	MFP_PIN_SM_BE1,
+	MFP_PIN_SM_ADV,
+	MFP_PIN_SM_ADVMUX,
+	MFP_PIN_SM_RDY,
+
+	MFP_PIN_MMC1_DAT7,
+	MFP_PIN_MMC1_DAT6,
+	MFP_PIN_MMC1_DAT5,
+	MFP_PIN_MMC1_DAT4,
+	MFP_PIN_MMC1_DAT3,
+	MFP_PIN_MMC1_DAT2,
+	MFP_PIN_MMC1_DAT1,
+	MFP_PIN_MMC1_DAT0,
+	MFP_PIN_MMC1_CMD,
+	MFP_PIN_MMC1_CLK,
+	MFP_PIN_MMC1_CD,
+	MFP_PIN_MMC1_WP,
 
 	/* additional pins on PXA930 */
 	MFP_PIN_GSIM_UIO,
-- 
cgit v1.2.3


From a3929f31cb2300f1ab190a0168e55bb55222ee40 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 20 Mar 2009 13:27:30 +0800
Subject: [ARM] pxa: add base support for pxa910-based TavorEVB

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-mmp/Kconfig    |   7 +++
 arch/arm/mach-mmp/Makefile   |   1 +
 arch/arm/mach-mmp/tavorevb.c | 109 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+)
 create mode 100644 arch/arm/mach-mmp/tavorevb.c

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index ba2e377484f..e77db550907 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -16,6 +16,13 @@ config MACH_ZYLONITE2
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Zylonite2 Development Board.
 
+config MACH_TAVOREVB
+	bool "Marvell's PXA910 TavorEVB Development Board"
+	select CPU_PXA910
+	help
+	  Say 'Y' here if you want to support the Marvell PXA910-based
+	  TavorEVB Development Board.
+
 endmenu
 
 config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 93d2bc7459d..542aafae5b1 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
new file mode 100644
index 00000000000..0e0c9220eab
--- /dev/null
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -0,0 +1,109 @@
+/*
+ *  linux/arch/arm/mach-mmp/tavorevb.c
+ *
+ *  Support for the Marvell PXA910-based TavorEVB Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long tavorevb_pin_config[] __initdata = {
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+
+	/* SMC */
+	SM_nCS0_nCS0,
+	SM_ADV_SM_ADV,
+	SM_SCLK_SM_SCLK,
+	SM_SCLK_SM_SCLK,
+	SM_BE0_SM_BE0,
+	SM_BE1_SM_BE1,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= SMC_CS1_PHYS_BASE + 0x300,
+		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(80),
+		.end	= gpio_to_irq(80),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static void __init tavorevb_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
+
+	/* on-chip devices */
+	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa910_init_irq,
+	.timer          = &pxa910_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
-- 
cgit v1.2.3


From 01215e35c28a719f38e2cafe90a2806f0e452de6 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 20 Mar 2009 13:33:49 +0800
Subject: [ARM] pxa: add base support for pxa910-based TTC_DKB

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-mmp/Kconfig   |  7 +++++++
 arch/arm/mach-mmp/Makefile  |  1 +
 arch/arm/mach-mmp/ttc_dkb.c | 47 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 55 insertions(+)
 create mode 100644 arch/arm/mach-mmp/ttc_dkb.c

(limited to 'arch')

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index e77db550907..c6a564fc4a7 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -23,6 +23,13 @@ config MACH_TAVOREVB
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TavorEVB Development Board.
 
+config MACH_TTC_DKB
+	bool "Marvell's PXA910 TavorEVB Development Board"
+	select CPU_PXA910
+	help
+	  Say 'Y' here if you want to support the Marvell PXA910-based
+	  TTC_DKB Development Board.
+
 endmenu
 
 config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 542aafae5b1..6883e658488 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
new file mode 100644
index 00000000000..08cfef6c92a
--- /dev/null
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -0,0 +1,47 @@
+/*
+ *  linux/arch/arm/mach-mmp/ttc_dkb.c
+ *
+ *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+
+#include "common.h"
+
+#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
+
+static unsigned long ttc_dkb_pin_config[] __initdata = {
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+};
+
+static void __init ttc_dkb_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
+
+	/* on-chip devices */
+	pxa910_add_uart(1);
+}
+
+MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa910_init_irq,
+	.timer          = &pxa910_timer,
+	.init_machine   = ttc_dkb_init,
+MACHINE_END
-- 
cgit v1.2.3


From e78b4eccb75b3ed5e50fdb12bc835e27aef33784 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 19 Feb 2009 17:35:31 +0800
Subject: [ARM] pxa: add defconfig for pxa168-based platforms

Instead of having various pieces of defconfig files for different
platforms, let's group them into a single one.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/pxa168_defconfig | 891 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 891 insertions(+)
 create mode 100644 arch/arm/configs/pxa168_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
new file mode 100644
index 00000000000..db5faeaec96
--- /dev/null
+++ b/arch/arm/configs/pxa168_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:43:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910 Implmentations
+#
+CONFIG_MACH_ASPENITE=y
+CONFIG_MACH_ZYLONITE2=y
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_CPU_PXA168=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 5a09f8916c20e4799b214349df371ff5d164778d Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Fri, 20 Mar 2009 14:55:11 +0800
Subject: [ARM] pxa: add defconfig for pxa910-based platforms

Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/configs/pxa910_defconfig | 891 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 891 insertions(+)
 create mode 100644 arch/arm/configs/pxa910_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
new file mode 100644
index 00000000000..8c7e299f1d6
--- /dev/null
+++ b/arch/arm/configs/pxa910_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:45:12 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_MACH_TAVOREVB=y
+
+#
+# Marvell PXA168/910 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+CONFIG_MACH_TTC_DKB=y
+CONFIG_CPU_PXA910=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 6574e001b4bc616022ee706a338fbbac26a9cedd Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Mon, 23 Mar 2009 19:13:21 +0100
Subject: [ARM] Kirkwood: Hook up I2C

Hook up I2C on Marvell Kirkwood.  Tested on a QNAP TS-219 which has
RTC connected through I2C.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                | 40 ++++++++++++++++++++++++++
 arch/arm/mach-kirkwood/common.h                |  1 +
 arch/arm/mach-kirkwood/include/mach/kirkwood.h |  1 +
 3 files changed, 42 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 9f012551794..19b03f62c3f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
@@ -370,6 +371,45 @@ void __init kirkwood_spi_init()
 }
 
 
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource kirkwood_i2c_resources[] = {
+	{
+		.name	= "i2c",
+		.start	= I2C_PHYS_BASE,
+		.end	= I2C_PHYS_BASE + 0x1f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c",
+		.start	= IRQ_KIRKWOOD_TWSI,
+		.end	= IRQ_KIRKWOOD_TWSI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2c_resources),
+	.resource	= kirkwood_i2c_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2c_pdata,
+	},
+};
+
+void __init kirkwood_i2c_init(void)
+{
+	platform_device_register(&kirkwood_i2c);
+}
+
+
 /*****************************************************************************
  * UART0
  ****************************************************************************/
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 9e5282684d5..c66a25066ce 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -37,6 +37,7 @@ void kirkwood_pcie_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
 void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index d3db30fe763..38c98685359 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -93,6 +93,7 @@
 #define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
 #define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
 #define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
 #define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-- 
cgit v1.2.3


From a441891f9dbd38e62f30caba2e9e9d43bdf37729 Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Sun, 22 Mar 2009 15:21:25 +0100
Subject: [ARM] Kirkwood: More consistency regarding MPP naming

With the exception of UART0, all MPP names are uppercase.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/mpp.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index 45cccb74310..e021a80c2ca 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -90,13 +90,13 @@
 
 #define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
 #define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP10_UArt0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
 #define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
 #define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
 
 #define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
 #define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP11_UArt0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
 #define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
 #define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
 #define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
-- 
cgit v1.2.3


From 99b36e68d3e9aa75439cbbcf04c78dc1b78f4049 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Mon, 23 Mar 2009 16:10:36 -0400
Subject: [ARM] update mach-types

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/tools/mach-types | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index b4211d8b2ac..945e0d237a1 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Mar 12 18:01:45 2009
+# Last update: Mon Mar 23 20:09:01 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2124,3 +2124,11 @@ mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
 fmzwebmodul		MACH_FMZWEBMODUL	FMZWEBMODUL		2134
 rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
 smallogger		MACH_SMALLOGGER		SMALLOGGER		2136
+ccw9p9215		MACH_CCW9P9215		CCW9P9215		2137
+dm355_leopard		MACH_DM355_LEOPARD	DM355_LEOPARD		2138
+ts219			MACH_TS219		TS219			2139
+tny_a9263		MACH_TNY_A9263		TNY_A9263		2140
+apollo			MACH_APOLLO		APOLLO			2141
+at91cap9stk		MACH_AT91CAP9STK	AT91CAP9STK		2142
+spc300			MACH_SPC300		SPC300			2143
+eko			MACH_EKO		EKO			2144
-- 
cgit v1.2.3


From 586dcf279baebc18aca943cd44014e3679510d5b Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Sun, 22 Mar 2009 15:22:11 +0100
Subject: [ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS

Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/kirkwood_defconfig  |  20 +++-
 arch/arm/mach-kirkwood/Kconfig       |   6 +
 arch/arm/mach-kirkwood/Makefile      |   1 +
 arch/arm/mach-kirkwood/common.h      |   1 +
 arch/arm/mach-kirkwood/ts219-setup.c | 220 +++++++++++++++++++++++++++++++++++
 5 files changed, 244 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-kirkwood/ts219-setup.c

(limited to 'arch')

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 9ed4e1b8667..c367ae44012 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -180,6 +180,7 @@ CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -852,13 +853,20 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -868,7 +876,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -1271,7 +1283,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 532443622a1..b5421cccd7e 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -26,6 +26,12 @@ config MACH_SHEEVAPLUG
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell SheevaPlug Reference Board.
 
+config MACH_TS219
+	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-119 and TS-219 Turbo NAS devices.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index de81b4b5bd3..8f03c9b9bdd 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index c66a25066ce..6ee88406f38 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -41,6 +41,7 @@ void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 
+extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
 
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
new file mode 100644
index 00000000000..dda5743cf3e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -0,0 +1,220 @@
+/*
+ *
+ * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_ts219_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+static const struct flash_platform_data qnap_ts219_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_ts219_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
+};
+
+static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_ts219_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 15,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 16,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+	.buttons	= qnap_ts219_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts219_button_data,
+	}
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_GPIO,		/* USB Copy button */
+	MPP16_GPIO,		/* Reset button */
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP22_SATA1_PRESENTn,
+	MPP23_SATA0_PRESENTn,
+	0
+};
+
+
+/*****************************************************************************
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_ts219_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
+static void __init qnap_ts219_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	spi_register_board_info(qnap_ts219_spi_slave_info,
+				ARRAY_SIZE(qnap_ts219_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts219_ge00_data);
+	kirkwood_sata_init(&qnap_ts219_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts219_button_device);
+
+	pm_power_off = qnap_ts219_power_off;
+
+}
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts219_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 0c1355e36fdc304b102851312d80a1e69c01f5a2 Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Sat, 21 Mar 2009 11:09:25 +0000
Subject: [ARM] orion5x: update of FPGA ID's for the TS-78xx

Received official word finally from Technological Systems on which
FPGA ID's they have released unto the world.  Also an additional of
a dummy entry matching the FPGA ID of the Verilog template on our
wiki.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/ts78xx-fpga.h  | 10 ++++++++--
 arch/arm/mach-orion5x/ts78xx-setup.c |  7 +++++--
 2 files changed, 13 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0a314ddef65..0f9cdf45895 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -6,8 +6,14 @@
  */
 enum fpga_ids {
 	/* Technologic Systems */
-	TS7800_REV_B2 = FPGAID(0x00b480, 0x02),
-	TS7800_REV_B3 = FPGAID(0x00b480, 0x03),
+	TS7800_REV_1	= FPGAID(0x00b480, 0x01),
+	TS7800_REV_2	= FPGAID(0x00b480, 0x02),
+	TS7800_REV_3	= FPGAID(0x00b480, 0x03),
+	TS7800_REV_4	= FPGAID(0x00b480, 0x04),
+	TS7800_REV_5	= FPGAID(0x00b480, 0x05),
+
+	/* Unaffordable & Expensive */
+	UAE_DUMMY	= FPGAID(0xffffff, 0x01),
 };
 
 struct fpga_device {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index f5191ddea08..9a6b397f972 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -282,8 +282,11 @@ static void ts78xx_fpga_supports(void)
 {
 	/* TODO: put this 'table' into ts78xx-fpga.h */
 	switch (ts78xx_fpga.id) {
-	case TS7800_REV_B2:
-	case TS7800_REV_B3:
+	case TS7800_REV_1:
+	case TS7800_REV_2:
+	case TS7800_REV_3:
+	case TS7800_REV_4:
+	case TS7800_REV_5:
 		ts78xx_fpga.supports.ts_rtc.present = 1;
 		ts78xx_fpga.supports.ts_nand.present = 1;
 		break;
-- 
cgit v1.2.3


From d7001198366bffce4506ba21b7b0fee2de194f73 Mon Sep 17 00:00:00 2001
From: Jan Nikitenko <jan.nikitenko@gmail.com>
Date: Fri, 28 Nov 2008 08:52:58 +0100
Subject: MIPS: Fix oops in dma_unmap_page on not coherent mips platforms

dma_cache_wback_inv() expects virtual address, but physical was provided
due to translation via plat_dma_addr_to_phys().
If replaced with dma_addr_to_virt(), page fault oops from dma_unmap_page()
is gone on au1550 platform.

Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/dma-default.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 546e6977d4f..bed56f1ac83 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -225,7 +225,7 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 	if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
 		unsigned long addr;
 
-		addr = plat_dma_addr_to_phys(dma_address);
+		addr = dma_addr_to_virt(dma_address);
 		dma_cache_wback_inv(addr, size);
 	}
 
-- 
cgit v1.2.3


From 5864810bc50de57e1b4757850d3208f69579af7f Mon Sep 17 00:00:00 2001
From: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Date: Wed, 18 Mar 2009 09:04:01 +0900
Subject: MIPS: VR5500: Enable prefetch

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/c-r4k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index c43f4b26a69..871e828bc62 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -780,7 +780,7 @@ static void __cpuinit probe_pcache(void)
 		c->dcache.ways = 2;
 		c->dcache.waybit = 0;
 
-		c->options |= MIPS_CPU_CACHE_CDEX_P;
+		c->options |= MIPS_CPU_CACHE_CDEX_P | MIPS_CPU_PREFETCH;
 		break;
 
 	case CPU_TX49XX:
-- 
cgit v1.2.3


From 5484879c0a50de7f60d403d375faff41cbd4ab01 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 21 Mar 2009 13:50:48 +0800
Subject: MIPS: compat: Remove duplicated #include

Remove duplicated #include in arch/mips/kernel/linux32.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/linux32.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 1a86f84fa94..49aac6e17df 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -32,7 +32,6 @@
 #include <linux/module.h>
 #include <linux/binfmts.h>
 #include <linux/security.h>
-#include <linux/syscalls.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
 #include <linux/ipc.h>
-- 
cgit v1.2.3


From 89e18eb331cc83fb4923bbc9a93beb5cb53eca0a Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 23 Mar 2009 22:14:55 +0100
Subject: MIPS: Change {set,clear,change}_c0_<foo> to return old value.

This is more standard and useful and need for the following fix to work
correctly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 0417516503f..526f327475c 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1391,11 +1391,11 @@ static inline void tlb_write_random(void)
 static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
-	unsigned int res;					\
+	unsigned int res, new;					\
 								\
 	res = read_c0_##name();					\
-	res |= set;						\
-	write_c0_##name(res);					\
+	new = res | set;					\
+	write_c0_##name(new);					\
 								\
 	return res;						\
 }								\
@@ -1403,24 +1403,24 @@ set_c0_##name(unsigned int set)					\
 static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
-	unsigned int res;					\
+	unsigned int res, new;					\
 								\
 	res = read_c0_##name();					\
-	res &= ~clear;						\
-	write_c0_##name(res);					\
+	new = res & ~clear;					\
+	write_c0_##name(new);					\
 								\
 	return res;						\
 }								\
 								\
 static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int new)		\
+change_c0_##name(unsigned int change, unsigned int val)		\
 {								\
-	unsigned int res;					\
+	unsigned int res, new;					\
 								\
 	res = read_c0_##name();					\
-	res &= ~change;						\
-	res |= (new & change);					\
-	write_c0_##name(res);					\
+	new = res & ~change;					\
+	new |= (val & change);					\
+	write_c0_##name(new);					\
 								\
 	return res;						\
 }
-- 
cgit v1.2.3


From 9fb4c2b9e06c0a197d867b34865b113a47370bd5 Mon Sep 17 00:00:00 2001
From: Chris Dearman <chris@mips.com>
Date: Fri, 20 Mar 2009 15:33:55 -0700
Subject: MIPS: R2: Fix problem with code that incorrectly modifies ebase.

Commit 566f74f6b2f8b85d5b8d6caaf97e5672cecd3e3e had a change that
incorrectly modified ebase. This backs out the lines that modified
ebase.
In addition, the ebase exception vector is now allocated with correct
alignment and the ebase register updated according to the architecture
specification.

Based on original patch by David VomLehn <dvomlehn@cisco.com>.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/traps.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b2d7041341b..29fadaccecd 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1520,7 +1520,9 @@ void __cpuinit per_cpu_trap_init(void)
 #endif /* CONFIG_MIPS_MT_SMTC */
 
 	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long sr = set_c0_status(ST0_BEV);
 		write_c0_ebase(ebase);
+		write_c0_status(sr);
 		/* Setting vector spacing enables EI/VI mode  */
 		change_c0_intctl(0x3e0, VECTORSPACING);
 	}
@@ -1602,8 +1604,6 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 #ifdef CONFIG_64BIT
 	unsigned long uncached_ebase = TO_UNCAC(ebase);
 #endif
-	if (cpu_has_mips_r2)
-		uncached_ebase += (read_c0_ebase() & 0x3ffff000);
 
 	if (!addr)
 		panic(panic_null_cerr);
@@ -1635,9 +1635,11 @@ void __init trap_init(void)
 		return;	/* Already done */
 #endif
 
-	if (cpu_has_veic || cpu_has_vint)
-		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
-	else {
+	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long size = 0x200 + VECTORSPACING*64;
+		ebase = (unsigned long)
+			__alloc_bootmem(size, 1 << fls(size), 0);
+	} else {
 		ebase = CAC_BASE;
 		if (cpu_has_mips_r2)
 			ebase += (read_c0_ebase() & 0x3ffff000);
-- 
cgit v1.2.3


From 733ecc5c06bb2892f04ab1881721d665644cd261 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:23 -0700
Subject: omap mailbox: cleanup omap2 register definition with macro

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/mach-omap2/mailbox.c | 77 ++++++++++++++++---------------------------
 1 file changed, 29 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 32b7af3c610..4487a4de52f 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -1,9 +1,9 @@
 /*
- * Mailbox reservation modules for OMAP2
+ * Mailbox reservation modules for OMAP2/3
  *
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *        and  Paul Mundt <paul.mundt@nokia.com>
+ *        and  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,40 +18,19 @@
 #include <mach/mailbox.h>
 #include <mach/irqs.h>
 
-#define MAILBOX_REVISION		0x00
-#define MAILBOX_SYSCONFIG		0x10
-#define MAILBOX_SYSSTATUS		0x14
-#define MAILBOX_MESSAGE_0		0x40
-#define MAILBOX_MESSAGE_1		0x44
-#define MAILBOX_MESSAGE_2		0x48
-#define MAILBOX_MESSAGE_3		0x4c
-#define MAILBOX_MESSAGE_4		0x50
-#define MAILBOX_MESSAGE_5		0x54
-#define MAILBOX_FIFOSTATUS_0		0x80
-#define MAILBOX_FIFOSTATUS_1		0x84
-#define MAILBOX_FIFOSTATUS_2		0x88
-#define MAILBOX_FIFOSTATUS_3		0x8c
-#define MAILBOX_FIFOSTATUS_4		0x90
-#define MAILBOX_FIFOSTATUS_5		0x94
-#define MAILBOX_MSGSTATUS_0		0xc0
-#define MAILBOX_MSGSTATUS_1		0xc4
-#define MAILBOX_MSGSTATUS_2		0xc8
-#define MAILBOX_MSGSTATUS_3		0xcc
-#define MAILBOX_MSGSTATUS_4		0xd0
-#define MAILBOX_MSGSTATUS_5		0xd4
-#define MAILBOX_IRQSTATUS_0		0x100
-#define MAILBOX_IRQENABLE_0		0x104
-#define MAILBOX_IRQSTATUS_1		0x108
-#define MAILBOX_IRQENABLE_1		0x10c
-#define MAILBOX_IRQSTATUS_2		0x110
-#define MAILBOX_IRQENABLE_2		0x114
-#define MAILBOX_IRQSTATUS_3		0x118
-#define MAILBOX_IRQENABLE_3		0x11c
+#define MAILBOX_REVISION		0x000
+#define MAILBOX_SYSCONFIG		0x010
+#define MAILBOX_SYSSTATUS		0x014
+#define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))
+#define MAILBOX_FIFOSTATUS(m)		(0x080 + 4 * (m))
+#define MAILBOX_MSGSTATUS(m)		(0x0c0 + 4 * (m))
+#define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
+#define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
 
-static unsigned long mbox_base;
+#define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
+#define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
-#define MAILBOX_IRQ_NOTFULL(n)		(1 << (2 * (n) + 1))
-#define MAILBOX_IRQ_NEWMSG(n)		(1 << (2 * (n)))
+static unsigned long mbox_base;
 
 struct omap_mbox2_fifo {
 	unsigned long msg;
@@ -209,15 +188,15 @@ static struct omap_mbox_ops omap2_mbox_ops = {
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE_0,
-		.fifo_stat	= MAILBOX_FIFOSTATUS_0,
+		.msg		= MAILBOX_MESSAGE(0),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
 	},
 	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE_1,
-		.msg_stat	= MAILBOX_MSGSTATUS_1,
+		.msg		= MAILBOX_MESSAGE(1),
+		.msg_stat	= MAILBOX_MSGSTATUS(1),
 	},
-	.irqenable	= MAILBOX_IRQENABLE_0,
-	.irqstatus	= MAILBOX_IRQSTATUS_0,
+	.irqenable	= MAILBOX_IRQENABLE(0),
+	.irqstatus	= MAILBOX_IRQSTATUS(0),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
 };
@@ -232,15 +211,15 @@ EXPORT_SYMBOL(mbox_dsp_info);
 /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE_2,
-		.fifo_stat	= MAILBOX_FIFOSTATUS_2,
+		.msg		= MAILBOX_MESSAGE(2),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
 	},
 	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE_3,
-		.msg_stat	= MAILBOX_MSGSTATUS_3,
+		.msg		= MAILBOX_MESSAGE(3),
+		.msg_stat	= MAILBOX_MSGSTATUS(3),
 	},
-	.irqenable	= MAILBOX_IRQENABLE_3,
-	.irqstatus	= MAILBOX_IRQSTATUS_3,
+	.irqenable	= MAILBOX_IRQENABLE(3),
+	.irqstatus	= MAILBOX_IRQSTATUS(3),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
 };
@@ -320,4 +299,6 @@ static void __exit omap2_mbox_exit(void)
 module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-- 
cgit v1.2.3


From 6c20a68372f158def0a29657ce11b3609ed24f9a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:23 -0700
Subject: omap mailbox: add initial omap3 support

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/mach-omap2/devices.c              | 37 ++++++++++++----
 arch/arm/mach-omap2/mailbox.c              | 70 ++++++++++++++++++------------
 arch/arm/plat-omap/Kconfig                 |  8 ++++
 arch/arm/plat-omap/include/mach/omap34xx.h |  1 +
 4 files changed, 80 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index ce03fa75077..d5f2a8118df 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -28,13 +28,14 @@
 #include <mach/eac.h>
 #include <mach/mmc.h>
 
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#define OMAP2_MBOX_BASE		IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
+#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
-static struct resource mbox_resources[] = {
+#define MBOX_REG_SIZE	0x120
+
+static struct resource omap2_mbox_resources[] = {
 	{
-		.start		= OMAP2_MBOX_BASE,
-		.end		= OMAP2_MBOX_BASE + 0x11f,
+		.start		= OMAP24XX_MAILBOX_BASE,
+		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -47,20 +48,40 @@ static struct resource mbox_resources[] = {
 	},
 };
 
+static struct resource omap3_mbox_resources[] = {
+	{
+		.start		= OMAP34XX_MAILBOX_BASE,
+		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_MAIL_U0_MPU,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device mbox_device = {
 	.name		= "mailbox",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mbox_resources),
-	.resource	= mbox_resources,
 };
 
 static inline void omap_init_mbox(void)
 {
+	if (cpu_is_omap2420()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
+		mbox_device.resource = omap2_mbox_resources;
+	} else if (cpu_is_omap3430()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
+		mbox_device.resource = omap3_mbox_resources;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
 	platform_device_register(&mbox_device);
 }
 #else
 static inline void omap_init_mbox(void) { }
-#endif
+#endif /* CONFIG_OMAP_MBOX_FWK */
 
 #if defined(CONFIG_OMAP_STI)
 
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4487a4de52f..d925ef3d7d4 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,7 +30,7 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
-static unsigned long mbox_base;
+static void __iomem *mbox_base;
 
 struct omap_mbox2_fifo {
 	unsigned long msg;
@@ -52,14 +52,14 @@ static struct clk *mbox_ick_handle;
 static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 				  omap_mbox_type_t irq);
 
-static inline unsigned int mbox_read_reg(unsigned int reg)
+static inline unsigned int mbox_read_reg(size_t ofs)
 {
-	return __raw_readl(mbox_base + reg);
+	return __raw_readl(mbox_base + ofs);
 }
 
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
 {
-	__raw_writel(val, mbox_base + reg);
+	__raw_writel(val, mbox_base + ofs);
 }
 
 /* Mailbox H/W preparations */
@@ -208,7 +208,7 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
-/* IVA */
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {
 		.msg		= MAILBOX_MESSAGE(2),
@@ -229,17 +229,12 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
 static int __init omap2_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int ret = 0;
-
-	if (pdev->num_resources != 3) {
-		dev_err(&pdev->dev, "invalid number of resources: %d\n",
-			pdev->num_resources);
-		return -ENODEV;
-	}
+	int ret;
 
 	/* MBOX base */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -247,34 +242,53 @@ static int __init omap2_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = res->start;
+	mbox_base = ioremap(res->start, res->end - res->start);
+	if (!mbox_base)
+		return -ENOMEM;
 
-	/* DSP IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!res)) {
+	/* DSP or IVA2 IRQ */
+	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
+	if (mbox_dsp_info.irq < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_dsp;
 	}
-	mbox_dsp_info.irq = res->start;
 
 	ret = omap_mbox_register(&mbox_dsp_info);
-
-	/* IVA IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
-		return -ENODEV;
+	if (ret)
+		goto err_dsp;
+
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
+	if (cpu_is_omap2420()) {
+		/* IVA IRQ */
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+		if (unlikely(!res)) {
+			dev_err(&pdev->dev, "invalid irq resource\n");
+			ret = -ENODEV;
+			goto err_iva1;
+		}
+		mbox_iva_info.irq = res->start;
+		ret = omap_mbox_register(&mbox_iva_info);
+		if (ret)
+			goto err_iva1;
 	}
-	mbox_iva_info.irq = res->start;
-
-	ret = omap_mbox_register(&mbox_iva_info);
+#endif
+	return 0;
 
+err_iva1:
+	omap_mbox_unregister(&mbox_dsp_info);
+err_dsp:
+	iounmap(mbox_base);
 	return ret;
 }
 
 static int omap2_mbox_remove(struct platform_device *pdev)
 {
+#if defined(CONFIG_ARCH_OMAP2420)
+	omap_mbox_unregister(&mbox_iva_info);
+#endif
 	omap_mbox_unregister(&mbox_dsp_info);
+	iounmap(mbox_base);
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 46d3b0b9ce6..6b1d5061032 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -104,6 +104,14 @@ config OMAP_MCBSP
 	  Say Y here if you want support for the OMAP Multichannel
 	  Buffered Serial Port.
 
+config OMAP_MBOX_FWK
+	tristate "Mailbox framework support"
+	depends on ARCH_OMAP
+	default n
+	help
+	  Say Y here if you want to use OMAP Mailbox framework support for
+	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index 8e0479fff05..89173f16b9b 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -61,6 +61,7 @@
 #define OMAP2_CM_BASE			OMAP3430_CM_BASE
 #define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
 #define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
 #endif
 
-- 
cgit v1.2.3


From 94fc58c6da019257680ae711c061cb403582a362 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:24 -0700
Subject: omap mailbox: print hardware revision at startup

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/mach-omap2/mailbox.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index d925ef3d7d4..44e9101ab69 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -74,6 +74,9 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 	}
 	clk_enable(mbox_ick_handle);
 
+	l = mbox_read_reg(MAILBOX_REVISION);
+	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+
 	/* set smart-idle & autoidle */
 	l = mbox_read_reg(MAILBOX_SYSCONFIG);
 	l |= 0x00000011;
-- 
cgit v1.2.3


From f48cca87703a4f4c372f1519e72e0fd6acb70d54 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:24 -0700
Subject: omap mailbox: fix empty struct device for omap_mbox

Since "mbox->dev" doesn't exist and isn't created either at
registration, this patch will create "struct device", which belongs to
"omap-mailbox" class and set this pointer for the member of
"struct omap_mbox".

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/plat-omap/include/mach/mailbox.h |  4 +-
 arch/arm/plat-omap/mailbox.c              | 63 +++++++++++++++----------------
 2 files changed, 33 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
index 7cbed9332e1..577db6852f4 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -53,7 +53,7 @@ struct omap_mbox {
 
 	mbox_msg_t		seq_snd, seq_rcv;
 
-	struct device		dev;
+	struct device		*dev;
 
 	struct omap_mbox	*next;
 	void			*priv;
@@ -67,7 +67,7 @@ void omap_mbox_init_seq(struct omap_mbox *);
 struct omap_mbox *omap_mbox_get(const char *);
 void omap_mbox_put(struct omap_mbox *);
 
-int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox *);
 int omap_mbox_unregister(struct omap_mbox *);
 
 #endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index b52ce053e6f..75ede474d84 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -1,10 +1,9 @@
 /*
  * OMAP mailbox driver
  *
- * Copyright (C) 2006 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
  *
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- *		Restructured by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -136,7 +135,7 @@ static void mbox_rx_work(struct work_struct *work)
 	unsigned long flags;
 
 	if (mbox->rxq->callback == NULL) {
-		sysfs_notify(&mbox->dev.kobj, NULL, "mbox");
+		sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
 		return;
 	}
 
@@ -204,7 +203,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
 	enable_mbox_irq(mbox, IRQ_RX);
-	nomem:
+nomem:
 	schedule_work(&mbox->rxq->work);
 }
 
@@ -286,7 +285,7 @@ static ssize_t mbox_show(struct class *class, char *buf)
 static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
 
 static struct class omap_mbox_class = {
-	.name = "omap_mbox",
+	.name = "omap-mailbox",
 };
 
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
@@ -333,21 +332,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 			return ret;
 	}
 
-	mbox->dev.class = &omap_mbox_class;
-	dev_set_name(&mbox->dev, "%s", mbox->name);
-	dev_set_drvdata(&mbox->dev, mbox);
-
-	ret = device_register(&mbox->dev);
-	if (unlikely(ret))
-		goto fail_device_reg;
-
-	ret = device_create_file(&mbox->dev, &dev_attr_mbox);
-	if (unlikely(ret)) {
-		printk(KERN_ERR
-			"device_create_file failed: %d\n", ret);
-		goto fail_create_mbox;
-	}
-
 	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
 				mbox->name, mbox);
 	if (unlikely(ret)) {
@@ -377,10 +361,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
  fail_alloc_txq:
 	free_irq(mbox->irq, mbox);
  fail_request_irq:
-	device_remove_file(&mbox->dev, &dev_attr_mbox);
- fail_create_mbox:
-	device_unregister(&mbox->dev);
- fail_device_reg:
 	if (unlikely(mbox->ops->shutdown))
 		mbox->ops->shutdown(mbox);
 
@@ -393,8 +373,6 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
 	mbox_queue_free(mbox->rxq);
 
 	free_irq(mbox->irq, mbox);
-	device_remove_file(&mbox->dev, &dev_attr_mbox);
-	class_unregister(&omap_mbox_class);
 
 	if (unlikely(mbox->ops->shutdown))
 		mbox->ops->shutdown(mbox);
@@ -440,7 +418,7 @@ void omap_mbox_put(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_put);
 
-int omap_mbox_register(struct omap_mbox *mbox)
+int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 {
 	int ret = 0;
 	struct omap_mbox **tmp;
@@ -450,14 +428,31 @@ int omap_mbox_register(struct omap_mbox *mbox)
 	if (mbox->next)
 		return -EBUSY;
 
+	mbox->dev = device_create(&omap_mbox_class,
+				  parent, 0, mbox, "%s", mbox->name);
+	if (IS_ERR(mbox->dev))
+		return PTR_ERR(mbox->dev);
+
+	ret = device_create_file(mbox->dev, &dev_attr_mbox);
+	if (ret)
+		goto err_sysfs;
+
 	write_lock(&mboxes_lock);
 	tmp = find_mboxes(mbox->name);
-	if (*tmp)
+	if (*tmp) {
 		ret = -EBUSY;
-	else
-		*tmp = mbox;
+		write_unlock(&mboxes_lock);
+		goto err_find;
+	}
+	*tmp = mbox;
 	write_unlock(&mboxes_lock);
 
+	return 0;
+
+err_find:
+	device_remove_file(mbox->dev, &dev_attr_mbox);
+err_sysfs:
+	device_unregister(mbox->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
@@ -473,6 +468,8 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 			*tmp = mbox->next;
 			mbox->next = NULL;
 			write_unlock(&mboxes_lock);
+			device_remove_file(mbox->dev, &dev_attr_mbox);
+			device_unregister(mbox->dev);
 			return 0;
 		}
 		tmp = &(*tmp)->next;
@@ -501,4 +498,6 @@ static void __exit omap_mbox_class_exit(void)
 subsys_initcall(omap_mbox_class_init);
 module_exit(omap_mbox_class_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
+MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU");
-- 
cgit v1.2.3


From f98d67a07e90f3ed7a6c351ae70bcd6bf8bcf478 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:25 -0700
Subject: omap mailbox: fix empty struct device for omap1

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/mach-omap1/devices.c |  2 +-
 arch/arm/mach-omap1/mailbox.c | 29 +++++++++++++++--------------
 2 files changed, 16 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ba5d7c08dc1..bbbaeb0abcd 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -86,7 +86,7 @@ static struct resource mbox_resources[] = {
 };
 
 static struct platform_device mbox_device = {
-	.name		= "mailbox",
+	.name		= "omap1-mailbox",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mbox_resources),
 	.resource	= mbox_resources,
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 59abbf331a9..0af4d6c85b4 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -1,7 +1,7 @@
 /*
  * Mailbox reservation modules for DSP
  *
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -27,7 +27,7 @@
 #define MAILBOX_DSP2ARM1_Flag		0x1c
 #define MAILBOX_DSP2ARM2_Flag		0x20
 
-unsigned long mbox_base;
+static void __iomem *mbox_base;
 
 struct omap_mbox1_fifo {
 	unsigned long cmd;
@@ -40,14 +40,14 @@ struct omap_mbox1_priv {
 	struct omap_mbox1_fifo rx_fifo;
 };
 
-static inline int mbox_read_reg(unsigned int reg)
+static inline int mbox_read_reg(size_t ofs)
 {
-	return __raw_readw(mbox_base + reg);
+	return __raw_readw(mbox_base + ofs);
 }
 
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
 {
-	__raw_writew(val, mbox_base + reg);
+	__raw_writew(val, mbox_base + ofs);
 }
 
 /* msg */
@@ -143,7 +143,7 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
-static int __init omap1_mbox_probe(struct platform_device *pdev)
+static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	int ret = 0;
@@ -170,12 +170,10 @@ static int __init omap1_mbox_probe(struct platform_device *pdev)
 	}
 	mbox_dsp_info.irq = res->start;
 
-	ret = omap_mbox_register(&mbox_dsp_info);
-
-	return ret;
+	return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 }
 
-static int omap1_mbox_remove(struct platform_device *pdev)
+static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister(&mbox_dsp_info);
 
@@ -184,9 +182,9 @@ static int omap1_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
-	.remove	= omap1_mbox_remove,
+	.remove	= __devexit_p(omap1_mbox_remove),
 	.driver	= {
-		.name	= "mailbox",
+		.name	= "omap1-mailbox",
 	},
 };
 
@@ -203,4 +201,7 @@ static void __exit omap1_mbox_exit(void)
 module_init(omap1_mbox_init);
 module_exit(omap1_mbox_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_ALIAS("platform:omap1-mailbox");
-- 
cgit v1.2.3


From da8cfe03a461fe759041e7f130f96913b262aa6b Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:25 -0700
Subject: omap mailbox: fix empty struct device for omap2

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/mach-omap2/devices.c |  2 +-
 arch/arm/mach-omap2/mailbox.c | 13 +++++++------
 2 files changed, 8 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d5f2a8118df..14537ffd8af 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -61,7 +61,7 @@ static struct resource omap3_mbox_resources[] = {
 };
 
 static struct platform_device mbox_device = {
-	.name		= "mailbox",
+	.name		= "omap2-mailbox",
 	.id		= -1,
 };
 
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 44e9101ab69..0b8476ba95f 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -234,7 +234,7 @@ static struct omap_mbox mbox_iva_info = {
 };
 #endif
 
-static int __init omap2_mbox_probe(struct platform_device *pdev)
+static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	int ret;
@@ -257,7 +257,7 @@ static int __init omap2_mbox_probe(struct platform_device *pdev)
 		goto err_dsp;
 	}
 
-	ret = omap_mbox_register(&mbox_dsp_info);
+	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)
 		goto err_dsp;
 
@@ -271,7 +271,7 @@ static int __init omap2_mbox_probe(struct platform_device *pdev)
 			goto err_iva1;
 		}
 		mbox_iva_info.irq = res->start;
-		ret = omap_mbox_register(&mbox_iva_info);
+		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
 		if (ret)
 			goto err_iva1;
 	}
@@ -285,7 +285,7 @@ err_dsp:
 	return ret;
 }
 
-static int omap2_mbox_remove(struct platform_device *pdev)
+static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 {
 #if defined(CONFIG_ARCH_OMAP2420)
 	omap_mbox_unregister(&mbox_iva_info);
@@ -297,9 +297,9 @@ static int omap2_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
-	.remove = omap2_mbox_remove,
+	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = "mailbox",
+		.name = "omap2-mailbox",
 	},
 };
 
@@ -319,3 +319,4 @@ module_exit(omap2_mbox_exit);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
 MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");
-- 
cgit v1.2.3


From c75ee7520b4ad48a6948f51ca43b2e46ebd3696a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:26 -0700
Subject: omap mailbox: add save_/restore_ctx() for PM

To preserve the registers during off-mode

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/mach-omap2/mailbox.c             | 32 +++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mailbox.h | 23 ++++++++++++++++++++++
 2 files changed, 55 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 0b8476ba95f..fd5b8a5925c 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,6 +30,9 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
+#define MBOX_REG_SIZE			0x120
+#define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
+
 static void __iomem *mbox_base;
 
 struct omap_mbox2_fifo {
@@ -45,6 +48,7 @@ struct omap_mbox2_priv {
 	unsigned long irqstatus;
 	u32 newmsg_bit;
 	u32 notfull_bit;
+	u32 ctx[MBOX_NR_REGS];
 };
 
 static struct clk *mbox_ick_handle;
@@ -165,6 +169,32 @@ static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 	return (enable & status & bit);
 }
 
+static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
+{
+	int i;
+	struct omap_mbox2_priv *p = mbox->priv;
+
+	for (i = 0; i < MBOX_NR_REGS; i++) {
+		p->ctx[i] = mbox_read_reg(i * sizeof(u32));
+
+		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+			i, p->ctx[i]);
+	}
+}
+
+static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+	int i;
+	struct omap_mbox2_priv *p = mbox->priv;
+
+	for (i = 0; i < MBOX_NR_REGS; i++) {
+		mbox_write_reg(p->ctx[i], i * sizeof(u32));
+
+		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+			i, p->ctx[i]);
+	}
+}
+
 static struct omap_mbox_ops omap2_mbox_ops = {
 	.type		= OMAP_MBOX_TYPE2,
 	.startup	= omap2_mbox_startup,
@@ -177,6 +207,8 @@ static struct omap_mbox_ops omap2_mbox_ops = {
 	.disable_irq	= omap2_mbox_disable_irq,
 	.ack_irq	= omap2_mbox_ack_irq,
 	.is_irq		= omap2_mbox_is_irq,
+	.save_ctx	= omap2_mbox_save_ctx,
+	.restore_ctx	= omap2_mbox_restore_ctx,
 };
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
index 577db6852f4..b7a6991814e 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -33,6 +33,9 @@ struct omap_mbox_ops {
 	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	/* ctx */
+	void		(*save_ctx)(struct omap_mbox *mbox);
+	void		(*restore_ctx)(struct omap_mbox *mbox);
 };
 
 struct omap_mbox_queue {
@@ -70,4 +73,24 @@ void omap_mbox_put(struct omap_mbox *);
 int omap_mbox_register(struct device *parent, struct omap_mbox *);
 int omap_mbox_unregister(struct omap_mbox *);
 
+static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+	if (!mbox->ops->save_ctx) {
+		dev_err(mbox->dev, "%s:\tno save\n", __func__);
+		return;
+	}
+
+	mbox->ops->save_ctx(mbox);
+}
+
+static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+	if (!mbox->ops->restore_ctx) {
+		dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+		return;
+	}
+
+	mbox->ops->restore_ctx(mbox);
+}
+
 #endif /* MAILBOX_H */
-- 
cgit v1.2.3


From 9ae0ee0076d51d9017e89004643825a67d852910 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:26 -0700
Subject: omap mailbox: move mailbox.h into mailbox.c

no need to keep mailbox.h separately.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/plat-omap/mailbox.c |  86 ++++++++++++++++++++++++++++++++++++-
 arch/arm/plat-omap/mailbox.h | 100 -------------------------------------------
 2 files changed, 85 insertions(+), 101 deletions(-)
 delete mode 100644 arch/arm/plat-omap/mailbox.h

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 75ede474d84..fcac60dedc8 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,11 +31,95 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <mach/mailbox.h>
-#include "mailbox.h"
 
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
+/*
+ * Mailbox sequence bit API
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#  define MBOX_USE_SEQ_BIT
+#elif defined(CONFIG_ARCH_OMAP2)
+#  define MBOX_USE_SEQ_BIT
+#endif
+
+#ifdef MBOX_USE_SEQ_BIT
+/* seq_rcv should be initialized with any value other than
+ * 0 and 1 << 31, to allow either value for the first
+ * message.  */
+static inline void mbox_seq_init(struct omap_mbox *mbox)
+{
+	/* any value other than 0 and 1 << 31 */
+	mbox->seq_rcv = 0xffffffff;
+}
+
+static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
+{
+	/* add seq_snd to msg */
+	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
+	/* flip seq_snd */
+	mbox->seq_snd ^= 1 << 31;
+}
+
+static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+	mbox_msg_t seq = msg & (1 << 31);
+	if (seq == mbox->seq_rcv)
+		return -1;
+	mbox->seq_rcv = seq;
+	return 0;
+}
+#else
+static inline void mbox_seq_init(struct omap_mbox *mbox)
+{
+}
+static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
+{
+}
+static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+	return 0;
+}
+#endif
+
+/* Mailbox FIFO handle functions */
+static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
+{
+	return mbox->ops->fifo_read(mbox);
+}
+static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+	mbox->ops->fifo_write(mbox, msg);
+}
+static inline int mbox_fifo_empty(struct omap_mbox *mbox)
+{
+	return mbox->ops->fifo_empty(mbox);
+}
+static inline int mbox_fifo_full(struct omap_mbox *mbox)
+{
+	return mbox->ops->fifo_full(mbox);
+}
+
+/* Mailbox IRQ handle functions */
+static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	mbox->ops->enable_irq(mbox, irq);
+}
+static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	mbox->ops->disable_irq(mbox, irq);
+}
+static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	if (mbox->ops->ack_irq)
+		mbox->ops->ack_irq(mbox, irq);
+}
+static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+	return mbox->ops->is_irq(mbox, irq);
+}
+
 /* Mailbox Sequence Bit function */
 void omap_mbox_init_seq(struct omap_mbox *mbox)
 {
diff --git a/arch/arm/plat-omap/mailbox.h b/arch/arm/plat-omap/mailbox.h
deleted file mode 100644
index 67c6740b8ad..00000000000
--- a/arch/arm/plat-omap/mailbox.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Mailbox internal functions
- *
- * Copyright (C) 2006 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_MAILBOX_H
-#define __ARCH_ARM_PLAT_MAILBOX_H
-
-/*
- * Mailbox sequence bit API
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#  define MBOX_USE_SEQ_BIT
-#elif defined(CONFIG_ARCH_OMAP2)
-#  define MBOX_USE_SEQ_BIT
-#endif
-
-#ifdef MBOX_USE_SEQ_BIT
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message.  */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-	/* any value other than 0 and 1 << 31 */
-	mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-	/* add seq_snd to msg */
-	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
-	/* flip seq_snd */
-	mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox_msg_t seq = msg & (1 << 31);
-	if (seq == mbox->seq_rcv)
-		return -1;
-	mbox->seq_rcv = seq;
-	return 0;
-}
-#else
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-}
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-}
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	return 0;
-}
-#endif
-
-/* Mailbox FIFO handle functions */
-static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_read(mbox);
-}
-static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox->ops->fifo_write(mbox, msg);
-}
-static inline int mbox_fifo_empty(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_empty(mbox);
-}
-static inline int mbox_fifo_full(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_full(mbox);
-}
-
-/* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
-static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	if (mbox->ops->ack_irq)
-		mbox->ops->ack_irq(mbox, irq);
-}
-static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	return mbox->ops->is_irq(mbox, irq);
-}
-
-#endif				/* __ARCH_ARM_PLAT_MAILBOX_H */
-- 
cgit v1.2.3


From 7a781afde63adf5d75042be8ada509c913a94afe Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:31 -0700
Subject: omap mailbox: convert sequence bit checking to module paramter

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/plat-omap/mailbox.c | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index fcac60dedc8..10f240558d9 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -32,30 +32,34 @@
 #include <linux/io.h>
 #include <mach/mailbox.h>
 
+static int enable_seq_bit;
+module_param(enable_seq_bit, bool, 0);
+MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
+
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
 /*
  * Mailbox sequence bit API
  */
-#if defined(CONFIG_ARCH_OMAP1)
-#  define MBOX_USE_SEQ_BIT
-#elif defined(CONFIG_ARCH_OMAP2)
-#  define MBOX_USE_SEQ_BIT
-#endif
 
-#ifdef MBOX_USE_SEQ_BIT
 /* seq_rcv should be initialized with any value other than
  * 0 and 1 << 31, to allow either value for the first
  * message.  */
 static inline void mbox_seq_init(struct omap_mbox *mbox)
 {
+	if (!enable_seq_bit)
+		return;
+
 	/* any value other than 0 and 1 << 31 */
 	mbox->seq_rcv = 0xffffffff;
 }
 
 static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
 {
+	if (!enable_seq_bit)
+		return;
+
 	/* add seq_snd to msg */
 	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
 	/* flip seq_snd */
@@ -64,24 +68,17 @@ static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
 
 static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
 {
-	mbox_msg_t seq = msg & (1 << 31);
+	mbox_msg_t seq;
+
+	if (!enable_seq_bit)
+		return 0;
+
+	seq = msg & (1 << 31);
 	if (seq == mbox->seq_rcv)
 		return -1;
 	mbox->seq_rcv = seq;
 	return 0;
 }
-#else
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-}
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-}
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	return 0;
-}
-#endif
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-- 
cgit v1.2.3


From 8dff0fa55dfc22bfee6601c2552f89c52d2948f6 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 23 Mar 2009 18:07:32 -0700
Subject: omap mailbox: remove unnecessary header file inclusion

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/plat-omap/mailbox.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 10f240558d9..0abfbaa5987 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -21,15 +21,11 @@
  *
  */
 
-#include <linux/init.h>
 #include <linux/module.h>
-#include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
-#include <linux/blkdev.h>
-#include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/io.h>
+
 #include <mach/mailbox.h>
 
 static int enable_seq_bit;
-- 
cgit v1.2.3


From d9558b19f2d1f01f6a11e148405cd3af63b8d6a8 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:32 -0700
Subject: ARM: OMAP: No need to include board-perseus2.h or board-fsample.h
 from hardware.h

Move defines to the board file and remove the now
unnecessary headers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-fsample.c              | 34 +++++++++++++++-
 arch/arm/plat-omap/include/mach/board-fsample.h  | 51 ------------------------
 arch/arm/plat-omap/include/mach/board-perseus2.h | 39 ------------------
 arch/arm/plat-omap/include/mach/hardware.h       |  8 ----
 4 files changed, 33 insertions(+), 99 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-fsample.h
 delete mode 100644 arch/arm/plat-omap/include/mach/board-perseus2.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 30308294e7c..19e0e923233 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -34,7 +34,39 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/board.h>
-#include <mach/board-fsample.h>
+
+/* fsample is pretty close to p2-sample */
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
deleted file mode 100644
index cb3c5ae1277..00000000000
--- a/arch/arm/plat-omap/include/mach/board-fsample.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <mach/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
deleted file mode 100644
index c06c3d717d5..00000000000
--- a/arch/arm/plat-omap/include/mach/board-perseus2.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board-perseus2.h
- *
- *  Copyright 2003 by Texas Instruments Incorporated
- *    OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <mach/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 6589ddbb63b..5b59188ecea 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -302,14 +302,6 @@
 #include "board-h2.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
 #ifdef CONFIG_MACH_OMAP_H3
 #include "board-h3.h"
 #endif
-- 
cgit v1.2.3


From eb6b0b1832a779cfa65bb66b8a88454d988a1d69 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:33 -0700
Subject: ARM: OMAP: No need to include board-h2.h from hardware.h

Also move board-h2.h to mach-omap1.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-h2-mmc.c         |  2 ++
 arch/arm/mach-omap1/board-h2.c             |  5 ++++
 arch/arm/mach-omap1/board-h2.h             | 38 +++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/board-h2.h | 41 ------------------------------
 arch/arm/plat-omap/include/mach/hardware.h |  4 ---
 5 files changed, 45 insertions(+), 45 deletions(-)
 create mode 100644 arch/arm/mach-omap1/board-h2.h
 delete mode 100644 arch/arm/plat-omap/include/mach/board-h2.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 409fa56d0a8..44d4a966bed 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -19,6 +19,8 @@
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
+#include "board-h2.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0d784a79509..b31b6d9b2e3 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -46,6 +46,11 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 
+#include "board-h2.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h
new file mode 100644
index 00000000000..315e2662547
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-omap1/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
+
+extern void h2_mmc_init(void);
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
deleted file mode 100644
index 15531c8dc0e..00000000000
--- a/arch/arm/plat-omap/include/mach/board-h2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
-
-extern void h2_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 5b59188ecea..ac4d8d05155 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -298,10 +298,6 @@
 #include "board-innovator.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
 #ifdef CONFIG_MACH_OMAP_H3
 #include "board-h3.h"
 #endif
-- 
cgit v1.2.3


From 228fe42e5e78649f4a773a47c0a48cbea8e640af Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:33 -0700
Subject: ARM: OMAP: No need to include board-h3.h from hardware.h

Also move board-h3.h to mach-omap1.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-h3-mmc.c         |  2 ++
 arch/arm/mach-omap1/board-h3.c             |  5 ++++
 arch/arm/mach-omap1/board-h3.h             | 35 +++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/board-h3.h | 38 ------------------------------
 arch/arm/plat-omap/include/mach/hardware.h |  4 ----
 5 files changed, 42 insertions(+), 42 deletions(-)
 create mode 100644 arch/arm/mach-omap1/board-h3.h
 delete mode 100644 arch/arm/plat-omap/include/mach/board-h3.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index fdfe793d56f..0d8a3c195e2 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -19,6 +19,8 @@
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
+#include "board-h3.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index bf08b6ad22e..4b872f3822b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -50,6 +50,11 @@
 #include <mach/dma.h>
 #include <mach/common.h>
 
+#include "board-h3.h"
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
 #define H3_TS_GPIO	48
 
 static int h3_keymap[] = {
diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h
new file mode 100644
index 00000000000..78de535be3c
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h3.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-omap1/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
+
+extern void h3_mmc_init(void);
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
deleted file mode 100644
index 1888326da7e..00000000000
--- a/arch/arm/plat-omap/include/mach/board-h3.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
-
-extern void h3_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index ac4d8d05155..040244cc719 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -298,10 +298,6 @@
 #include "board-innovator.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
 #ifdef CONFIG_MACH_OMAP_H4
 #include "board-h4.h"
 #endif
-- 
cgit v1.2.3


From 278267be38949b051f49e0bc3da76bfb2af49abf Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:34 -0700
Subject: ARM: OMAP: No need to include board-innovator.h from hardware.h

Move the defines to the board file and remove the now unnecessary
header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-innovator.c             |  3 ++
 arch/arm/plat-omap/include/mach/board-innovator.h | 52 -----------------------
 arch/arm/plat-omap/include/mach/hardware.h        |  4 --
 3 files changed, 3 insertions(+), 56 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-innovator.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 071cd02a734..714a08f79e9 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -39,6 +39,9 @@
 #include <mach/common.h>
 #include <mach/mmc.h>
 
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(0, 3, KEY_DOWN),
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
deleted file mode 100644
index 5ae3e79b9f9..00000000000
--- a/arch/arm/plat-omap/include/mach/board-innovator.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 040244cc719..0b1b91f1981 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -294,10 +294,6 @@
  * ---------------------------------------------------------------------------
  */
 
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
 #ifdef CONFIG_MACH_OMAP_H4
 #include "board-h4.h"
 #endif
-- 
cgit v1.2.3


From 3a0110cdae41fb91d005c335db9e5e697dddc5cd Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:34 -0700
Subject: ARM: OMAP: No need to include board-osk.h from hardware.h

Move the defines to the board file and remove the now unnecessary
header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-osk.c             | 14 +++++++++
 arch/arm/plat-omap/include/mach/board-osk.h | 47 -----------------------------
 arch/arm/plat-omap/include/mach/hardware.h  |  4 ---
 3 files changed, 14 insertions(+), 51 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-osk.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 1a16ecb2ccc..9c4cac274cc 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,6 +52,20 @@
 #include <mach/tc.h>
 #include <mach/common.h>
 
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
deleted file mode 100644
index 3850cb1f220..00000000000
--- a/arch/arm/plat-omap/include/mach/board-osk.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START		0x04800300
-
-/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
-
-#endif /*  __ASM_ARCH_OMAP_OSK_H */
-
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 0b1b91f1981..201a8fa2479 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -314,10 +314,6 @@
 #include "board-apollon.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
 #ifdef CONFIG_MACH_VOICEBLUE
 #include "board-voiceblue.h"
 #endif
-- 
cgit v1.2.3


From b2830810fd8ca8cd8a929a6d6a6c886b1d689a51 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:35 -0700
Subject: ARM: OMAP: No need to include board-palm*.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header files.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-palmte.c              | 15 ++++++++++++
 arch/arm/mach-omap1/board-palmtt.c              |  7 ++++++
 arch/arm/mach-omap1/board-palmz71.c             | 10 ++++++++
 arch/arm/mach-omap1/board-sx1-mmc.c             |  1 +
 arch/arm/mach-omap1/board-sx1.c                 |  1 +
 arch/arm/plat-omap/include/mach/board-palmte.h  | 32 -------------------------
 arch/arm/plat-omap/include/mach/board-palmtt.h  | 23 ------------------
 arch/arm/plat-omap/include/mach/board-palmz71.h | 26 --------------------
 arch/arm/plat-omap/include/mach/hardware.h      | 12 ----------
 9 files changed, 34 insertions(+), 93 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-palmte.h
 delete mode 100644 arch/arm/plat-omap/include/mach/board-palmtt.h
 delete mode 100644 arch/arm/plat-omap/include/mach/board-palmz71.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 99f2b43f254..55d524b78e2 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -43,6 +43,21 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
 static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 1cbc1275c95..9dc9d7931b5 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -43,6 +43,13 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
 static int palmtt_keymap[] = {
 	KEY(0, 0, KEY_ESC),
 	KEY(0, 1, KEY_SPACE),
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index baf5efbfe3e..a2f99a46e7b 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -46,6 +46,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
 static void __init
 omap_palmz71_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 66a4d7d5255..58a46e4e45c 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -17,6 +17,7 @@
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/gpio.h>
+#include <mach/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 28c76a1e71c..ab277d42f30 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -41,6 +41,7 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/keypad.h>
+#include <mach/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
deleted file mode 100644
index 6906cdebbcf..00000000000
--- a/arch/arm/plat-omap/include/mach/board-palmte.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters :	http://palmtelinux.sf.net
- *			palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO	0
-#define PALMTE_USB_OR_DC_GPIO	1
-#define PALMTE_TSC_GPIO		4
-#define PALMTE_PINTDAV_GPIO	6
-#define PALMTE_MMC_WP_GPIO	8
-#define PALMTE_MMC_POWER_GPIO	9
-#define PALMTE_HDQ_GPIO		11
-#define PALMTE_HEADPHONES_GPIO	14
-#define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
-
-#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
deleted file mode 100644
index e79f382b593..00000000000
--- a/arch/arm/plat-omap/include/mach/board-palmtt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
deleted file mode 100644
index b1d7d579b31..00000000000
--- a/arch/arm/plat-omap/include/mach/board-palmz71.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 201a8fa2479..194ed49e4d7 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -318,18 +318,6 @@
 #include "board-voiceblue.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
 #ifdef CONFIG_MACH_SX1
 #include "board-sx1.h"
 #endif
-- 
cgit v1.2.3


From a362fdbddb713d27ec0931a8be64b767f85bae0d Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:35 -0700
Subject: ARM: OMAP: No need to include board-omap2430sdp.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
SDP2430_ETHR_GPIO_IRQ to SDP2430_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c             | 13 +++++---
 arch/arm/plat-omap/include/mach/board-2430sdp.h | 41 -------------------------
 arch/arm/plat-omap/include/mach/hardware.h      |  4 ---
 3 files changed, 8 insertions(+), 50 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-2430sdp.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 83fa37211d7..c8abe6a8dfe 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -38,9 +38,12 @@
 
 #include "mmc-twl4030.h"
 
+#define SDP2430_CS0_BASE	0x04000000
 #define	SDP2430_FLASH_CS	0
 #define	SDP2430_SMC91X_CS	5
 
+#define SDP2430_ETHR_GPIO_IRQ		149
+
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -102,8 +105,8 @@ static struct resource sdp2430_smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
+		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
@@ -170,13 +173,13 @@ static inline void __init sdp2430_init_smc91x(void)
 	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
 	udelay(100);
 
-	if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
+	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			OMAP24XX_ETHR_GPIO_IRQ);
+			SDP2430_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
 		goto out;
 	}
-	gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
+	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
 
 out:
 	clk_disable(gpmc_fck);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
deleted file mode 100644
index 10d449ea7ed..00000000000
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ		149
-#define SDP2430_CS0_BASE		0x04000000
-
-/* Function prototypes */
-extern void sdp2430_flash_init(void);
-extern void sdp2430_usb_init(void);
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 194ed49e4d7..346a5c73197 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -298,10 +298,6 @@
 #include "board-h4.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
 #ifdef CONFIG_MACH_OMAP3_BEAGLE
 #include "board-omap3beagle.h"
 #endif
-- 
cgit v1.2.3


From 7055477558686e106149bf0bb0edc0f5cd848ad9 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:35 -0700
Subject: ARM: OMAP: No need to include board-apollon.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-apollon.c             |  1 +
 arch/arm/plat-omap/include/mach/board-apollon.h | 46 -------------------------
 arch/arm/plat-omap/include/mach/hardware.h      |  4 ---
 3 files changed, 1 insertion(+), 50 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-apollon.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 0a7b24ba165..64561247d93 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -51,6 +51,7 @@
 
 #define APOLLON_FLASH_CS	0
 #define APOLLON_ETH_CS		1
+#define APOLLON_ETHR_GPIO_IRQ	74
 
 static struct mtd_partition apollon_partitions[] = {
 	{
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
deleted file mode 100644
index 61bd5e8f09b..00000000000
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-#include <mach/cpu.h>
-
-extern void apollon_mmc_init(void);
-
-static inline int apollon_plus(void)
-{
-	/* The apollon plus has IDCODE revision 5 */
-	return omap_rev() & 0xc0;
-}
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ		74
-
-#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
-
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 346a5c73197..26f14f7b3e6 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -306,10 +306,6 @@
 #include "board-ldp.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
 #ifdef CONFIG_MACH_VOICEBLUE
 #include "board-voiceblue.h"
 #endif
-- 
cgit v1.2.3


From 40662d77311d8de3a26c33f2fd5a2d4d810a4c8a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:36 -0700
Subject: ARM: OMAP: No need to include board-h4.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-h4.c             |  4 +++-
 arch/arm/plat-omap/include/mach/board-h4.h | 38 ------------------------------
 arch/arm/plat-omap/include/mach/hardware.h |  4 ----
 3 files changed, 3 insertions(+), 43 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-h4.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5e9b14675b1..71226973eee 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -47,6 +47,8 @@
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
+#define H4_ETHR_GPIO_IRQ		92
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -341,7 +343,7 @@ static inline void __init h4_init_debug(void)
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
-	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
 
 out:
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
deleted file mode 100644
index 7c3fa0f0a65..00000000000
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-h4.h
- *
- * Hardware definitions for TI OMAP2420 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* MMC Prototypes */
-extern void h4_mmc_init(void);
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ		92
-#endif /*  __ASM_ARCH_OMAP_H4_H */
-
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 26f14f7b3e6..85f02b6a802 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -294,10 +294,6 @@
  * ---------------------------------------------------------------------------
  */
 
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
 #ifdef CONFIG_MACH_OMAP3_BEAGLE
 #include "board-omap3beagle.h"
 #endif
-- 
cgit v1.2.3


From ec7558a62d2e28ec607fdfab1cd39b475d929ce5 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:37 -0700
Subject: ARM: OMAP: No need to include board-ldp.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP34XX_ETHR_START to LDP_ETHR_START.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-ldp.c             | 10 +++++---
 arch/arm/plat-omap/include/mach/board-ldp.h | 39 -----------------------------
 arch/arm/plat-omap/include/mach/hardware.h  |  4 ---
 3 files changed, 6 insertions(+), 47 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-ldp.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 6031e179926..f035d7836e5 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,7 +28,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ldp.h>
 #include <mach/mcspi.h>
 #include <mach/gpio.h>
 #include <mach/board.h>
@@ -41,12 +40,15 @@
 
 #include "mmc-twl4030.h"
 
-#define SDP3430_SMC91X_CS	3
+#define LDP_SMC911X_CS		1
+#define LDP_SMC911X_GPIO	152
+#define DEBUG_BASE		0x08000000
+#define LDP_ETHR_START		DEBUG_BASE
 
 static struct resource ldp_smc911x_resources[] = {
 	[0] = {
-		.start	= OMAP34XX_ETHR_START,
-		.end	= OMAP34XX_ETHR_START + SZ_4K,
+		.start	= LDP_ETHR_START,
+		.end	= LDP_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
deleted file mode 100644
index f2339966521..00000000000
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-ldp.h
- *
- * Hardware definitions for TI OMAP3 LDP.
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_LDP_H
-#define __ASM_ARCH_OMAP_LDP_H
-
-extern void twl4030_bci_battery_init(void);
-
-#define TWL4030_IRQNUM		INT_34XX_SYS_NIRQ
-#define LDP_SMC911X_CS         1
-#define LDP_SMC911X_GPIO       152
-#define DEBUG_BASE             0x08000000
-#define OMAP34XX_ETHR_START    DEBUG_BASE
-#endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 85f02b6a802..bba9498253e 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -298,10 +298,6 @@
 #include "board-omap3beagle.h"
 #endif
 
-#ifdef CONFIG_MACH_OMAP_LDP
-#include "board-ldp.h"
-#endif
-
 #ifdef CONFIG_MACH_VOICEBLUE
 #include "board-voiceblue.h"
 #endif
-- 
cgit v1.2.3


From 0d4d9ab08ac28b4742dadc35b5ac7613abf71475 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:38 -0700
Subject: ARM: OMAP: No need to include board-overo.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-overo.c             |  7 ++++++-
 arch/arm/plat-omap/include/mach/board-overo.h | 26 --------------------------
 2 files changed, 6 insertions(+), 27 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-overo.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 82b3dc557c9..b92313c8b84 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,7 +37,6 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-overo.h>
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpio.h>
@@ -47,6 +46,12 @@
 
 #include "mmc-twl4030.h"
 
+#define OVERO_GPIO_BT_XGATE	15
+#define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_BT_NRESET	164
+#define OVERO_GPIO_USBH_CPEN	168
+#define OVERO_GPIO_USBH_NRESET	183
+
 #define NAND_BLOCK_SIZE SZ_128K
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h
deleted file mode 100644
index 7ecae66966d..00000000000
--- a/arch/arm/plat-omap/include/mach/board-overo.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * board-overo.h (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OVERO_H
-#define __ASM_ARCH_OVERO_H
-
-#define OVERO_GPIO_BT_XGATE	15
-#define OVERO_GPIO_W2W_NRESET	16
-#define OVERO_GPIO_BT_NRESET	164
-#define OVERO_GPIO_USBH_CPEN	168
-#define OVERO_GPIO_USBH_NRESET	183
-
-#endif /* ____ASM_ARCH_OVERO_H */
-
-- 
cgit v1.2.3


From d40cdf080deac7dfa1b3c6ea216db97e872de1b2 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:38 -0700
Subject: ARM: OMAP: No need to include board-nokia.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/board-nokia.h | 54 ---------------------------
 arch/arm/plat-omap/include/mach/board.h       |  3 --
 2 files changed, 57 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-nokia.h

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
deleted file mode 100644
index 2abbe001af8..00000000000
--- a/arch/arm/plat-omap/include/mach/board-nokia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board-nokia.h
- *
- *  Information structures for Nokia-specific board config data
- *
- *  Copyright (C) 2005	Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT	0x4e01
-#define OMAP_TAG_WLAN_CX3110X	0x4e02
-#define OMAP_TAG_CBUS		0x4e03
-#define OMAP_TAG_EM_ASIC_BB5	0x4e04
-
-
-#define BT_CHIP_CSR		1
-#define BT_CHIP_TI		2
-
-#define BT_SYSCLK_12		1
-#define BT_SYSCLK_38_4		2
-
-struct omap_bluetooth_config {
-	u8    chip_type;
-	u8    bt_wakeup_gpio;
-	u8    host_wakeup_gpio;
-	u8    reset_gpio;
-	u8    bt_uart;
-	u8    bd_addr[6];
-	u8    bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
-	u8  chip_type;
-	s16 power_gpio;
-	s16 irq_gpio;
-	s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
-	s16 clk_gpio;
-	s16 dat_gpio;
-	s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
-	s16 retu_irq_gpio;
-	s16 tahvo_irq_gpio;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 9466772fc7c..4a0afd2366e 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -133,9 +133,6 @@ struct omap_version_config {
 	char version[12];
 };
 
-
-#include <mach/board-nokia.h>
-
 struct omap_board_config_entry {
 	u16 tag;
 	u16 len;
-- 
cgit v1.2.3


From 6b0147cda6a9d8c236cd04fb35b44de828d8a7eb Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:07:39 -0700
Subject: ARM: OMAP: Remove remaining board-*.h includes from hardware.h

Also remove board-omap3beagle.h that is not included anywhere,
and move protoype for voiceblue_reset() from board-voiceblue.h
to system.h.

After this patch there are still board-ams-delta.h, board-sx1.h
and board-voiceblue.h that export some functions. These could
be removed if the functions were moved under drivers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 .../arm/plat-omap/include/mach/board-omap3beagle.h | 33 ----------------------
 arch/arm/plat-omap/include/mach/board-voiceblue.h  |  1 -
 arch/arm/plat-omap/include/mach/hardware.h         | 22 ---------------
 arch/arm/plat-omap/include/mach/system.h           |  2 ++
 4 files changed, 2 insertions(+), 56 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/mach/board-omap3beagle.h

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
deleted file mode 100644
index 3080d52d877..00000000000
--- a/arch/arm/plat-omap/include/mach/board-omap3beagle.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-omap3beagle.h
- *
- * Hardware definitions for TI OMAP3 BEAGLE.
- *
- * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP3_BEAGLE_H
-#define __ASM_ARCH_OMAP3_BEAGLE_H
-
-#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
index ed6d346ee12..27916b210f5 100644
--- a/arch/arm/plat-omap/include/mach/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
@@ -14,7 +14,6 @@
 extern void voiceblue_wdt_enable(void);
 extern void voiceblue_wdt_disable(void);
 extern void voiceblue_wdt_ping(void);
-extern void voiceblue_reset(void);
 
 #endif /*  __ASM_ARCH_VOICEBLUE_H */
 
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index bba9498253e..3dc423ed3e8 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -286,26 +286,4 @@
 #include "omap24xx.h"
 #include "omap34xx.h"
 
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP3_BEAGLE
-#include "board-omap3beagle.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06923f26154..8422845c5b6 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -11,6 +11,8 @@
 
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
+#else
+extern void voiceblue_reset(void);
 #endif
 
 extern void omap_prcm_arch_reset(char mode);
-- 
cgit v1.2.3


From ae302f40061235f6bc58ae9ba02aa849d60223b5 Mon Sep 17 00:00:00 2001
From: "Zebediah C. McClure" <zmc@lurian.net>
Date: Mon, 23 Mar 2009 18:07:39 -0700
Subject: [OMAP850] Add base support for omap850 cpu

Add base support for omap850 cpu.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/id.c                  |   4 +-
 arch/arm/plat-omap/include/mach/cpu.h     |  35 ++++++++--
 arch/arm/plat-omap/include/mach/omap850.h | 102 ++++++++++++++++++++++++++++++
 3 files changed, 136 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/plat-omap/include/mach/omap850.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 89bb8756f45..4ef26faf083 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,6 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
@@ -77,7 +78,7 @@ static u16 __init omap_get_jtag_id(void)
 	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
 	omap_id = omap_readl(OMAP32_ID_1);
 
-	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
 	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
 		prod_id = 0;
 	else
@@ -178,6 +179,7 @@ void __init omap_check_revision(void)
 
 	switch (cpu_type) {
 	case 0x07:
+	case 0x08:
 		omap_revision |= 0x07;
 		break;
 	case 0x03:
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index a8e1178a946..366f829edb1 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -56,6 +56,14 @@ unsigned int omap_rev(void);
 #  define OMAP_NAME omap730
 # endif
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP1
@@ -105,7 +113,7 @@ unsigned int omap_rev(void);
 /*
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
  * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
  * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
  * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
@@ -153,6 +161,10 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		is_omap7xx()
 # endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
 # if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		is_omap15xx()
@@ -166,6 +178,10 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 #  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		1
 # endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
 # if defined(CONFIG_ARCH_OMAP15XX)
 #  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		1
@@ -219,6 +235,7 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * These are only rarely needed.
  * cpu_is_omap330():	True for OMAP330
  * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap850():	True for OMAP850
  * cpu_is_omap1510():	True for OMAP1510
  * cpu_is_omap1610():	True for OMAP1610
  * cpu_is_omap1611():	True for OMAP1611
@@ -241,6 +258,7 @@ static inline int is_omap ##type (void)			\
 
 IS_OMAP_TYPE(310, 0x0310)
 IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(850, 0x0850)
 IS_OMAP_TYPE(1510, 0x1510)
 IS_OMAP_TYPE(1610, 0x1610)
 IS_OMAP_TYPE(1611, 0x1611)
@@ -255,6 +273,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
+#define cpu_is_omap850()		0
 #define cpu_is_omap1510()		0
 #define cpu_is_omap1610()		0
 #define cpu_is_omap5912()		0
@@ -272,12 +291,22 @@ IS_OMAP_TYPE(3430, 0x3430)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		is_omap730()
 # endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap850
+#  define cpu_is_omap850()		is_omap850()
+# endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
 #  undef  cpu_is_omap730
 #  define cpu_is_omap730()		1
 # endif
 #endif
+#else
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap850
+#  define cpu_is_omap850()		1
+# endif
+#endif
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -320,7 +349,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #endif
 
 /* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
 
@@ -378,5 +407,3 @@ int omap_type(void);
 void omap2_check_revision(void);
 
 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/mach/omap850.h
new file mode 100644
index 00000000000..c33f6798171
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap850.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap850.h
+ *
+ * Hardware definitions for TI OMAP850 processor.
+ *
+ * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP850_H
+#define __ASM_ARCH_OMAP850_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP850_DSP_BASE	0xE0000000
+#define OMAP850_DSP_SIZE	0x50000
+#define OMAP850_DSP_START	0xE0000000
+
+#define OMAP850_DSPREG_BASE	0xE1000000
+#define OMAP850_DSPREG_SIZE	SZ_128K
+#define OMAP850_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_CONFIG_BASE	0xfffe1000
+#define OMAP850_IO_CONF_0	0xfffe1070
+#define OMAP850_IO_CONF_1	0xfffe1074
+#define OMAP850_IO_CONF_2	0xfffe1078
+#define OMAP850_IO_CONF_3	0xfffe107c
+#define OMAP850_IO_CONF_4	0xfffe1080
+#define OMAP850_IO_CONF_5	0xfffe1084
+#define OMAP850_IO_CONF_6	0xfffe1088
+#define OMAP850_IO_CONF_7	0xfffe108c
+#define OMAP850_IO_CONF_8	0xfffe1090
+#define OMAP850_IO_CONF_9	0xfffe1094
+#define OMAP850_IO_CONF_10	0xfffe1098
+#define OMAP850_IO_CONF_11	0xfffe109c
+#define OMAP850_IO_CONF_12	0xfffe10a0
+#define OMAP850_IO_CONF_13	0xfffe10a4
+
+#define OMAP850_MODE_1		0xfffe1010
+#define OMAP850_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP850_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_FLASH_CFG_0	0xfffecc10
+#define OMAP850_FLASH_ACFG_0	0xfffecc50
+#define OMAP850_FLASH_CFG_1	0xfffecc14
+#define OMAP850_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_ICR_BASE	0xfffbb800
+#define OMAP850_DSP_M_CTL	0xfffbb804
+#define OMAP850_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP850_PCC_UPLD_CTRL		(OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP850_H */
+
-- 
cgit v1.2.3


From 56739a692946d4c2630cf287646ccaa67c828f47 Mon Sep 17 00:00:00 2001
From: "Zebediah C. McClure" <zmc@lurian.net>
Date: Mon, 23 Mar 2009 18:07:40 -0700
Subject: [OMAP850] Changes to base IO subsystem, v2

Changes to base IO subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/io.c               |  23 +++++++
 arch/arm/mach-omap1/mux.c              |  24 +++++++
 arch/arm/mach-omap1/serial.c           |   7 +++
 arch/arm/plat-omap/gpio.c              | 111 +++++++++++++++++++++++++++++++--
 arch/arm/plat-omap/include/mach/gpio.h |   3 +-
 arch/arm/plat-omap/include/mach/mux.h  |  52 ++++++++++++++-
 6 files changed, 212 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 4c3e582f3d3..3afe540149f 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -52,6 +52,22 @@ static struct map_desc omap730_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP850_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
+		.length		= OMAP850_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP850_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
+		.length		= OMAP850_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct map_desc omap1510_io_desc[] __initdata = {
 	{
@@ -109,6 +125,13 @@ void __init omap1_map_common_io(void)
 		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
 	}
 #endif
+
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+	}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 062c905c2ba..721e0d9d8b1 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -58,6 +58,25 @@ MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 #define OMAP730_PINS_SZ		0
 #endif	/* CONFIG_ARCH_OMAP730 */
 
+#ifdef CONFIG_ARCH_OMAP850
+struct pin_config __initdata_or_module omap850_pins[] = {
+MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+};
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
@@ -419,6 +438,11 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
+
+#ifdef CONFIG_ARCH_OMAP850
+	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+#endif
+
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0002084e065..842090b148f 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -121,6 +121,13 @@ void __init omap_serial_init(void)
 		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
 	}
 
+	if (cpu_is_omap850()) {
+		serial_platform_data[0].regshift = 0;
+		serial_platform_data[1].regshift = 0;
+		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+	}
+
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f856a90b264..d3fa41e3d8c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -80,6 +80,22 @@
 #define OMAP730_GPIO_INT_MASK		0x10
 #define OMAP730_GPIO_INT_STATUS		0x14
 
+/*
+ * OMAP850 specific GPIO registers
+ */
+#define OMAP850_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO_DATA_INPUT		0x00
+#define OMAP850_GPIO_DATA_OUTPUT	0x04
+#define OMAP850_GPIO_DIR_CONTROL	0x08
+#define OMAP850_GPIO_INT_CONTROL	0x0c
+#define OMAP850_GPIO_INT_MASK		0x10
+#define OMAP850_GPIO_INT_STATUS		0x14
+
 /*
  * omap24xx specific GPIO registers
  */
@@ -159,7 +175,8 @@ struct gpio_bank {
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_730		3
-#define METHOD_GPIO_24XX	4
+#define METHOD_GPIO_850		4
+#define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
@@ -190,6 +207,19 @@ static struct gpio_bank gpio_bank_730[7] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct gpio_bank gpio_bank_850[7] = {
+	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
+	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+};
+#endif
+
+
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
@@ -236,7 +266,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 4)];
 	}
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		if (OMAP_GPIO_IS_MPUIO(gpio))
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 5)];
@@ -251,7 +281,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 
 static inline int get_gpio_index(int gpio)
 {
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		return gpio & 0x1f;
 	if (cpu_is_omap24xx())
 		return gpio & 0x1f;
@@ -273,7 +303,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if ((cpu_is_omap16xx()) && gpio < 64)
 		return 0;
-	if (cpu_is_omap730() && gpio < 192)
+	if (cpu_is_omap7xx() && gpio < 192)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
@@ -318,6 +348,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -380,6 +415,16 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		l = __raw_readl(reg);
+		if (enable)
+			l |= 1 << gpio;
+		else
+			l &= ~(1 << gpio);
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
@@ -426,6 +471,11 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP730_GPIO_DATA_INPUT;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_INPUT;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
@@ -598,6 +648,18 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_CONTROL;
+		l = __raw_readl(reg);
+		if (trigger & IRQ_TYPE_EDGE_RISING)
+			l |= 1 << gpio;
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
+			l &= ~(1 << gpio);
+		else
+			goto bad;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -678,6 +740,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP730_GPIO_INT_STATUS;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_STATUS;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
@@ -736,6 +803,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_MASK;
+		mask = 0xffffffff;
+		inv = 1;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
@@ -799,6 +873,16 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_INT_MASK;
+		l = __raw_readl(reg);
+		if (enable)
+			l &= ~(gpio_mask);
+		else
+			l |= gpio_mask;
+		break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
@@ -983,6 +1067,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_730)
 		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (bank->method == METHOD_GPIO_850)
+		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
@@ -1372,6 +1460,13 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_730;
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		printk(KERN_INFO "OMAP850 GPIO hardware\n");
+		gpio_bank_count = 7;
+		gpio_bank = gpio_bank_850;
+	}
+#endif
 
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
@@ -1420,7 +1515,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) {
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
 			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
 			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
 
@@ -1743,6 +1838,9 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
@@ -1762,7 +1860,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730())
+		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+				cpu_is_omap850())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 8d9dfe31438..2b22a8799bc 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -31,7 +31,8 @@
 
 #define OMAP_MPUIO_BASE			0xfffb5000
 
-#ifdef CONFIG_ARCH_OMAP730
+#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
+
 #define OMAP_MPUIO_INPUT_LATCH		0x00
 #define OMAP_MPUIO_OUTPUT		0x02
 #define OMAP_MPUIO_IO_CNTL		0x04
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index f4362b8682c..6a02f8f4c8b 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -61,6 +61,16 @@
 					.pull_bit = bit, \
 					.pull_val = status,
 
+#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
+					.mux_reg = OMAP850_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
+					.pull_reg = OMAP850_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #else
 
 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -83,6 +93,15 @@
 					.pull_bit = bit, \
 					.pull_val = status,
 
+#define MUX_REG_850(reg, mode_offset, mode) \
+					.mux_reg = OMAP850_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #endif /* CONFIG_OMAP_MUX_DEBUG */
 
 #define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
@@ -98,7 +117,7 @@
 
 
 /*
- * OMAP730 has a slightly different config for the pin mux.
+ * OMAP730/850 has a slightly different config for the pin mux.
  * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
@@ -114,6 +133,17 @@
 	PU_PD_REG(NA, 0)		\
 },
 
+#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_850(mux_reg, mode_offset, mode)		\
+	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+
 #define MUX_CFG_24XX(desc, reg_offset, mode,			\
 				pull_en, pull_mode, dbg)	\
 {								\
@@ -221,6 +251,26 @@ enum omap730_index {
 	W17_730_USB_VBUSI,
 };
 
+enum omap850_index {
+	/* OMAP 850 keyboard */
+	E2_850_KBR0,
+	J7_850_KBR1,
+	E1_850_KBR2,
+	F3_850_KBR3,
+	D2_850_KBR4,
+	C2_850_KBC0,
+	D3_850_KBC1,
+	E4_850_KBC2,
+	F4_850_KBC3,
+	E3_850_KBC4,
+
+	/* USB */
+	AA17_850_USB_DM,
+	W16_850_USB_PU_EN,
+	W17_850_USB_VBUSI,
+};
+
+
 enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
-- 
cgit v1.2.3


From 557096fe2838778ec1c6df0186560ff21749f63d Mon Sep 17 00:00:00 2001
From: "Zebediah C. McClure" <zmc@lurian.net>
Date: Mon, 23 Mar 2009 18:07:44 -0700
Subject: [OMAP850] Changes to memory subsystem

Changes to memory subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c  | 4 ++--
 arch/arm/plat-omap/sram.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 47ec77af4cc..dcc9e83a61e 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -737,7 +737,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		 * id.
 		 */
 		dma_write(dev_id | (1 << 10), CCR(free_ch));
-	} else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+	} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
 		dma_write(dev_id, CCR(free_ch));
 	}
 
@@ -2339,7 +2339,7 @@ static int __init omap_init_dma(void)
 		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
 		dma_chan_count = 9;
 		enable_1510_mode = 1;
-	} else if (cpu_is_omap16xx() || cpu_is_omap730()) {
+	} else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 		printk(KERN_INFO "OMAP DMA hardware version %d\n",
 		       dma_read(HW_ID));
 		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index be7bcaf2b83..fa5297d643d 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -148,7 +148,7 @@ void __init omap_detect_sram(void)
 		omap_sram_base = OMAP1_SRAM_VA;
 		omap_sram_start = OMAP1_SRAM_PA;
 
-		if (cpu_is_omap730())
+		if (cpu_is_omap7xx())
 			omap_sram_size = 0x32000;	/* 200K */
 		else if (cpu_is_omap15xx())
 			omap_sram_size = 0x30000;	/* 192K */
-- 
cgit v1.2.3


From 59185eeeaad1f07fc930c1878f3773484219e3da Mon Sep 17 00:00:00 2001
From: "Zebediah C. McClure" <zmc@lurian.net>
Date: Mon, 23 Mar 2009 18:07:45 -0700
Subject: [OMAP850] IRQ related changes

IRQ related changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/irq.c              | 19 +++++++-
 arch/arm/plat-omap/include/mach/irqs.h | 83 +++++++++++++++++++++++++++++++++-
 2 files changed, 99 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9ad5197075f..de03c844899 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -145,6 +145,14 @@ static struct omap_irq_bank omap730_irq_banks[] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct omap_irq_bank omap850_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -184,6 +192,12 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+	if (cpu_is_omap850()) {
+		irq_banks = omap850_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+	}
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -214,9 +228,8 @@ void __init omap_init_irq(void)
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
 	/* Enable interrupts in global mask */
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx())
 		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-	}
 
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
@@ -236,6 +249,8 @@ void __init omap_init_irq(void)
 
 	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
+	else if (cpu_is_omap850())
+		omap_unmask_irq(INT_850_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index bed5274c910..7f57ee66f36 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -104,6 +104,29 @@
 #define INT_730_GPIO_BANK6	18
 #define INT_730_SPGIO_WR	29
 
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_850_IH2_FIQ		0
+#define INT_850_IH2_IRQ		1
+#define INT_850_USB_NON_ISO	2
+#define INT_850_USB_ISO		3
+#define INT_850_ICR		4
+#define INT_850_EAC		5
+#define INT_850_GPIO_BANK1	6
+#define INT_850_GPIO_BANK2	7
+#define INT_850_GPIO_BANK3	8
+#define INT_850_McBSP2TX	10
+#define INT_850_McBSP2RX	11
+#define INT_850_McBSP2RX_OVF	12
+#define INT_850_LCD_LINE	14
+#define INT_850_GSM_PROTECT	15
+#define INT_850_TIMER3		16
+#define INT_850_GPIO_BANK5	17
+#define INT_850_GPIO_BANK6	18
+#define INT_850_SPGIO_WR	29
+
+
 /*
  * IRQ numbers for interrupt handler 2
  *
@@ -237,6 +260,64 @@
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)
 
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_850_HW_ERRORS	(0 + IH2_BASE)
+#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_850_CFCD		(2 + IH2_BASE)
+#define INT_850_CFIREQ		(3 + IH2_BASE)
+#define INT_850_I2C		(4 + IH2_BASE)
+#define INT_850_PCC		(5 + IH2_BASE)
+#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_850_SPI_100K_1	(7 + IH2_BASE)
+#define INT_850_SYREN_SPI	(8 + IH2_BASE)
+#define INT_850_VLYNQ		(9 + IH2_BASE)
+#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_850_McBSP1TX	(11 + IH2_BASE)
+#define INT_850_McBSP1RX	(12 + IH2_BASE)
+#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_850_MCSI		(16 + IH2_BASE)
+#define INT_850_uWireTX		(17 + IH2_BASE)
+#define INT_850_uWireRX		(18 + IH2_BASE)
+#define INT_850_SMC_CD		(19 + IH2_BASE)
+#define INT_850_SMC_IREQ	(20 + IH2_BASE)
+#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_850_TIMER32K	(22 + IH2_BASE)
+#define INT_850_MMC_SDIO	(23 + IH2_BASE)
+#define INT_850_UPLD		(24 + IH2_BASE)
+#define INT_850_USB_HHC_1	(27 + IH2_BASE)
+#define INT_850_USB_HHC_2	(28 + IH2_BASE)
+#define INT_850_USB_GENI	(29 + IH2_BASE)
+#define INT_850_USB_OTG		(30 + IH2_BASE)
+#define INT_850_CAMERA_IF	(31 + IH2_BASE)
+#define INT_850_RNG		(32 + IH2_BASE)
+#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_850_SHA1_MD5	(36 + IH2_BASE)
+#define INT_850_SPI_100K_2	(37 + IH2_BASE)
+#define INT_850_RNG_IDLE	(38 + IH2_BASE)
+#define INT_850_MPUIO		(39 + IH2_BASE)
+#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_850_DMA_CH6		(53 + IH2_BASE)
+#define INT_850_DMA_CH7		(54 + IH2_BASE)
+#define INT_850_DMA_CH8		(55 + IH2_BASE)
+#define INT_850_DMA_CH9		(56 + IH2_BASE)
+#define INT_850_DMA_CH10	(57 + IH2_BASE)
+#define INT_850_DMA_CH11	(58 + IH2_BASE)
+#define INT_850_DMA_CH12	(59 + IH2_BASE)
+#define INT_850_DMA_CH13	(60 + IH2_BASE)
+#define INT_850_DMA_CH14	(61 + IH2_BASE)
+#define INT_850_DMA_CH15	(62 + IH2_BASE)
+#define INT_850_NAND		(63 + IH2_BASE)
+
 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
 #define INT_24XX_SDMA_IRQ1	13
@@ -341,7 +422,7 @@
 
 #define	INT_34XX_BENCH_MPU_EMUL	3
 
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
 #define IH_GPIO_BASE		(128 + IH2_BASE)
-- 
cgit v1.2.3


From ed98178319948d97ce8e664cf451cff6dbf04cdd Mon Sep 17 00:00:00 2001
From: "Zebediah C. McClure" <zmc@lurian.net>
Date: Mon, 23 Mar 2009 18:07:46 -0700
Subject: [OMAP850] Build system changes

Build system changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/Kconfig | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 10a301e3243..3f325d3718a 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -7,6 +7,11 @@ config ARCH_OMAP730
 	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
+config ARCH_OMAP850
+	depends on ARCH_OMAP1
+	bool "OMAP850 Based System"
+	select CPU_ARM926T
+
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
@@ -46,6 +51,12 @@ config MACH_OMAP_H3
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
+config MACH_OMAP_HTCWIZARD
+	bool "HTC Wizard"
+	depends on ARCH_OMAP850
+	help
+	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
+
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
@@ -163,7 +174,7 @@ config OMAP_ARM_216MHZ
 
 config OMAP_ARM_195MHZ
 	bool "OMAP ARM 195 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 195MHz clock for OMAP CPU. If unsure, say N.
 
@@ -175,13 +186,13 @@ config OMAP_ARM_192MHZ
 
 config OMAP_ARM_182MHZ
 	bool "OMAP ARM 182 MHz CPU"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
+	depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 182MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
@@ -193,20 +204,20 @@ config OMAP_ARM_150MHZ
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
-- 
cgit v1.2.3


From 6c366e3299e8e9458881e19913a79ea3ceff4a8f Mon Sep 17 00:00:00 2001
From: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Date: Mon, 23 Mar 2009 18:07:46 -0700
Subject: ARM: OMAP: Export dmtimer functions

Make the dmtimer function symbols available so modules can take use of
them.

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dmtimer.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index e4f0ce04ba9..bfd47570cc9 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -33,6 +33,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <mach/hardware.h>
 #include <mach/dmtimer.h>
 #include <mach/irqs.h>
@@ -362,6 +363,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 
 	return timer;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_request);
 
 struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 {
@@ -385,6 +387,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 
 	return timer;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
 
 void omap_dm_timer_free(struct omap_dm_timer *timer)
 {
@@ -395,6 +398,7 @@ void omap_dm_timer_free(struct omap_dm_timer *timer)
 	WARN_ON(!timer->reserved);
 	timer->reserved = 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_free);
 
 void omap_dm_timer_enable(struct omap_dm_timer *timer)
 {
@@ -406,6 +410,7 @@ void omap_dm_timer_enable(struct omap_dm_timer *timer)
 
 	timer->enabled = 1;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
@@ -417,11 +422,13 @@ void omap_dm_timer_disable(struct omap_dm_timer *timer)
 
 	timer->enabled = 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
 int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 {
 	return timer->irq;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
 
 #if defined(CONFIG_ARCH_OMAP1)
 
@@ -452,6 +459,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 	return inputmask;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
 #elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
 
@@ -459,6 +467,7 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
 	return timer->fclk;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
 
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
@@ -466,6 +475,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
 #endif
 
@@ -473,6 +483,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
 
 void omap_dm_timer_start(struct omap_dm_timer *timer)
 {
@@ -484,6 +495,7 @@ void omap_dm_timer_start(struct omap_dm_timer *timer)
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	}
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_start);
 
 void omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
@@ -495,6 +507,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	}
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
 #ifdef CONFIG_ARCH_OMAP1
 
@@ -507,6 +520,7 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	l |= source << n;
 	omap_writel(l, MOD_CONF_CTRL_1);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
 #else
 
@@ -523,6 +537,7 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	 * cause an abort. */
 	__delay(150000);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
 
 #endif
 
@@ -541,6 +556,7 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
 
 /* Optimized set_load which removes costly spin wait in timer_start */
 void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
@@ -560,6 +576,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
 
 void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 			     unsigned int match)
@@ -574,6 +591,7 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
 
 void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
 			   int toggle, int trigger)
@@ -590,6 +608,7 @@ void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
 	l |= trigger << 10;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
 
 void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 {
@@ -603,6 +622,7 @@ void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 	}
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
 
 void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 				  unsigned int value)
@@ -610,6 +630,7 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
 
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
@@ -619,11 +640,13 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 
 	return l;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
 
 void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
 
 unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
@@ -633,11 +656,13 @@ unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 
 	return l;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
 
 void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
 }
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
 
 int omap_dm_timers_active(void)
 {
@@ -658,6 +683,7 @@ int omap_dm_timers_active(void)
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 
 int __init omap_dm_timer_init(void)
 {
-- 
cgit v1.2.3


From d4c58bf45a9a1668cb850e02a2e1aad785bd9325 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Mon, 23 Mar 2009 18:07:46 -0700
Subject: ARM: OMAP: Add documentation for function omap_register_i2c_bus

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/i2c.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 467531edefd..3e95954e2a8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -119,6 +119,15 @@ static void __init omap_i2c_mux_pins(int bus)
 	omap_cfg_reg(scl);
 }
 
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
 int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
-- 
cgit v1.2.3


From 3a853fb933ddf9c5ea8c9f7c665dd8def26bceae Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Mon, 23 Mar 2009 18:07:47 -0700
Subject: ARM: OMAP: Add command line option for I2C bus speed, v2

This patch adds a new command line option "i2c_bus=bus_id,clkrate" into
I2C bus registration helper. Purpose of the option is to override the
default board specific bus speed which is supplied by the
omap_register_i2c_bus.

The default bus speed is typically set to speed of slowest I2C chip on the
bus and overriding allow to use some experimental configurations or updated
chip versions without any kernel modifications.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/i2c.c | 54 +++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 3e95954e2a8..aa70e435fa7 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -119,6 +119,46 @@ static void __init omap_i2c_mux_pins(int bus)
 	omap_cfg_reg(scl);
 }
 
+static int __init omap_i2c_nr_ports(void)
+{
+	int ports = 0;
+
+	if (cpu_class_is_omap1())
+		ports = 1;
+	else if (cpu_is_omap24xx())
+		ports = 2;
+	else if (cpu_is_omap34xx())
+		ports = 3;
+
+	return ports;
+}
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+	int ports;
+	int ints[3];
+
+	ports = omap_i2c_nr_ports();
+	get_options(str, 3, ints);
+	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+		return 0;
+	i2c_rate[ints[1] - 1] = ints[2];
+
+	return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
 /**
  * omap_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
@@ -132,19 +172,12 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
 {
-	int ports, err;
+	int err;
 	struct platform_device *pdev;
 	struct resource *res;
 	resource_size_t base, irq;
 
-	if (cpu_class_is_omap1())
-		ports = 1;
-	else if (cpu_is_omap24xx())
-		ports = 2;
-	else if (cpu_is_omap34xx())
-		ports = 3;
-
-	BUG_ON(bus_id < 1 || bus_id > ports);
+	BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
 
 	if (info) {
 		err = i2c_register_board_info(bus_id, info, len);
@@ -153,7 +186,8 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 	}
 
 	pdev = &omap_i2c_devices[bus_id - 1];
-	*(u32 *)pdev->dev.platform_data = clkrate;
+	if (i2c_rate[bus_id - 1] == 0)
+		i2c_rate[bus_id - 1] = clkrate;
 
 	if (bus_id == 1) {
 		res = pdev->resource;
-- 
cgit v1.2.3


From 7954763bb95fd484a76d1151b40956fe331d23b9 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Mon, 23 Mar 2009 18:07:48 -0700
Subject: ARM: OMAP: Add method to register additional I2C busses on the
 command line, v2

This patch extends command line option "i2c_bus=bus_id,clkrate" so that
it allow to register additional I2C busses that are not registered with
omap_register_i2c_bus from board initialization code.

Purpose of this is to register additional board busses which are routed
to external connectors only without any on board I2C devices.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/i2c.c | 73 ++++++++++++++++++++++++++++++++++--------------
 1 file changed, 52 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index aa70e435fa7..a303071d5e3 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -98,6 +98,8 @@ static const int omap34xx_pins[][2] = {
 static const int omap34xx_pins[][2] = {};
 #endif
 
+#define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
+
 static void __init omap_i2c_mux_pins(int bus)
 {
 	int scl, sda;
@@ -133,6 +135,31 @@ static int __init omap_i2c_nr_ports(void)
 	return ports;
 }
 
+static int __init omap_i2c_add_bus(int bus_id)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+	resource_size_t base, irq;
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+	if (bus_id == 1) {
+		res = pdev->resource;
+		if (cpu_class_is_omap1()) {
+			base = OMAP1_I2C_BASE;
+			irq = INT_I2C;
+		} else {
+			base = OMAP2_I2C_BASE1;
+			irq = INT_24XX_I2C1_IRQ;
+		}
+		res[0].start = base;
+		res[0].end = base + OMAP_I2C_SIZE;
+		res[1].start = irq;
+	}
+
+	omap_i2c_mux_pins(bus_id - 1);
+	return platform_device_register(pdev);
+}
+
 /**
  * omap_i2c_bus_setup - Process command line options for the I2C bus speed
  * @str: String of options
@@ -154,11 +181,33 @@ static int __init omap_i2c_bus_setup(char *str)
 	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
 		return 0;
 	i2c_rate[ints[1] - 1] = ints[2];
+	i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
 
 	return 1;
 }
 __setup("i2c_bus=", omap_i2c_bus_setup);
 
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+static int __init omap_register_i2c_bus_cmdline(void)
+{
+	int i, err = 0;
+
+	for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
+		if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
+			i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+			err = omap_i2c_add_bus(i + 1);
+			if (err)
+				goto out;
+		}
+
+out:
+	return err;
+}
+subsys_initcall(omap_register_i2c_bus_cmdline);
+
 /**
  * omap_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
@@ -173,9 +222,6 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			  unsigned len)
 {
 	int err;
-	struct platform_device *pdev;
-	struct resource *res;
-	resource_size_t base, irq;
 
 	BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
 
@@ -185,24 +231,9 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			return err;
 	}
 
-	pdev = &omap_i2c_devices[bus_id - 1];
-	if (i2c_rate[bus_id - 1] == 0)
+	if (!i2c_rate[bus_id - 1])
 		i2c_rate[bus_id - 1] = clkrate;
+	i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
 
-	if (bus_id == 1) {
-		res = pdev->resource;
-		if (cpu_class_is_omap1()) {
-			base = OMAP1_I2C_BASE;
-			irq = INT_I2C;
-		} else {
-			base = OMAP2_I2C_BASE1;
-			irq = INT_24XX_I2C1_IRQ;
-		}
-		res[0].start = base;
-		res[0].end = base + OMAP_I2C_SIZE;
-		res[1].start = irq;
-	}
-
-	omap_i2c_mux_pins(bus_id - 1);
-	return platform_device_register(pdev);
+	return omap_i2c_add_bus(bus_id);
 }
-- 
cgit v1.2.3


From 2263f0222e836c7b2c144e0546a2701661e2f517 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 23 Mar 2009 18:07:48 -0700
Subject: ARM: OMAP: Get available DMA channels from cmdline

This patch set up a cmdline option for omap dma for masking the
available channels. It is needed since the OMAP DMA is a system wide
resource and can be used by another software apart from the kernel.

To reserve the omap SDMA channels for kernel dma usage, use cmdline
bootarg "omap_dma_reserve_ch=". The valid range is 1 to 32.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index dcc9e83a61e..b1d3c7991ff 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -123,6 +123,7 @@ static struct dma_link_info *dma_linked_lch;
 
 static int dma_lch_count;
 static int dma_chan_count;
+static int omap_dma_reserve_channels;
 
 static spinlock_t dma_chan_lock;
 static struct omap_dma_lch *dma_chan;
@@ -2321,6 +2322,10 @@ static int __init omap_init_dma(void)
 		return -ENODEV;
 	}
 
+	if (cpu_class_is_omap2() && omap_dma_reserve_channels
+			&& (omap_dma_reserve_channels <= dma_lch_count))
+		dma_lch_count = omap_dma_reserve_channels;
+
 	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
 				GFP_KERNEL);
 	if (!dma_chan)
@@ -2371,7 +2376,7 @@ static int __init omap_init_dma(void)
 		u8 revision = dma_read(REVISION) & 0xff;
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
 		       revision >> 4, revision & 0xf);
-		dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+		dma_chan_count = dma_lch_count;
 	} else {
 		dma_chan_count = 0;
 		return 0;
@@ -2437,4 +2442,17 @@ static int __init omap_init_dma(void)
 
 arch_initcall(omap_init_dma);
 
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+	if (get_option(&str, &omap_dma_reserve_channels) != 1)
+		omap_dma_reserve_channels = 0;
+	return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
 
-- 
cgit v1.2.3


From 52176e70837d56cd238d6edc04cc403f1ffa86c6 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 23 Mar 2009 18:07:49 -0700
Subject: ARM: OMAP: Dispatch only relevant DMA interrupts

This fixes the spurious interrupt issue on a DMA channel.

In OMAP sDMA, contrast to the SDMA.DMA4_CSRi registers, the
SDMA.DMA4_IRQSTATUS_Lj registers are updated regardless of
the corresponding bits in the SDMA.DMA4_IRQENABLE_Lj registers.
Since there are four sDMA interrupt lines and if more than one
line is actively used by two concurrently running sDMA softwares
modules,then the spurious interrupt can be observed on the other
lines.

Fix in this patch will only dispatch the relevant and enabled
interrupts on a particular line thus perevting spurious IRQ.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index b1d3c7991ff..21cc0142b97 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1901,7 +1901,7 @@ static int omap2_dma_handle_ch(int ch)
 /* STATUS register count is from 1-32 while our is 0-31 */
 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 {
-	u32 val;
+	u32 val, enable_reg;
 	int i;
 
 	val = dma_read(IRQSTATUS_L0);
@@ -1910,6 +1910,8 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 			printk(KERN_WARNING "Spurious DMA IRQ\n");
 		return IRQ_HANDLED;
 	}
+	enable_reg = dma_read(IRQENABLE_L0);
+	val &= enable_reg; /* Dispatch only relevant interrupts */
 	for (i = 0; i < dma_lch_count && val != 0; i++) {
 		if (val & 1)
 			omap2_dma_handle_ch(i);
-- 
cgit v1.2.3


From b0b5aa3f4c17c6a21423b9728d701216ab2e1ff1 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Mon, 23 Mar 2009 18:07:49 -0700
Subject: ARM: OMAP: get rid of OMAP_TAG_USB, v2

OMAP_TAGS should vanish soon since they're not generic arm tags.
Most of them can be converted to a platform_data or parsed
from a command line like e.g. serial tag.

For OMAP_TAG_USB we just let boards call omap_usb_init()
passing a pointer to omap_usb_config.

Patch updated by Tony for mainline, basically make
n770 and h4 compile. Also folded in a fix for OSK
by David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c   |  2 +-
 arch/arm/mach-omap1/board-generic.c     |  5 ++---
 arch/arm/mach-omap1/board-h2.c          |  2 +-
 arch/arm/mach-omap1/board-h3.c          |  2 +-
 arch/arm/mach-omap1/board-innovator.c   |  5 ++---
 arch/arm/mach-omap1/board-nokia770.c    |  9 +--------
 arch/arm/mach-omap1/board-osk.c         |  3 ++-
 arch/arm/mach-omap1/board-palmte.c      |  2 +-
 arch/arm/mach-omap1/board-palmtt.c      |  2 +-
 arch/arm/mach-omap1/board-palmz71.c     |  2 +-
 arch/arm/mach-omap1/board-sx1.c         |  2 +-
 arch/arm/mach-omap1/board-voiceblue.c   |  2 +-
 arch/arm/mach-omap2/board-apollon.c     |  2 +-
 arch/arm/mach-omap2/board-h4.c          | 34 +++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/board.h |  1 -
 arch/arm/plat-omap/include/mach/usb.h   |  2 ++
 arch/arm/plat-omap/usb.c                | 25 ++++--------------------
 17 files changed, 56 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2e618391cc5..8b40aace9db 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -175,7 +175,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
 	{ OMAP_TAG_UART,	&ams_delta_uart_config },
-	{ OMAP_TAG_USB,		&ams_delta_usb_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
@@ -232,6 +231,7 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
+	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 7d267020537..e724940e86f 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -62,7 +62,6 @@ static struct omap_uart_config generic_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_USB,		NULL },
 	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
@@ -70,12 +69,12 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		generic_config[0].data = &generic1510_usb_config;
+		omap_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		generic_config[0].data = &generic1610_usb_config;
+		omap_usb_init(&generic1610_usb_config);
 	}
 #endif
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b31b6d9b2e3..f695aa053ac 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -369,7 +369,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_USB,		&h2_usb_config },
 	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
@@ -418,6 +417,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
+	omap_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4b872f3822b..4695965114c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -423,7 +423,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_USB,		&h3_usb_config },
 	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
@@ -477,6 +476,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
+	omap_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 714a08f79e9..2fd98260ea4 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -373,7 +373,6 @@ static struct omap_uart_config innovator_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel innovator_config[] = {
-	{ OMAP_TAG_USB,         NULL },
 	{ OMAP_TAG_LCD,		NULL },
 	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
@@ -395,13 +394,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		innovator_config[0].data = &innovator1510_usb_config;
+		omap_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		innovator_config[0].data = &h2_usb_config;
+		omap_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index af51e0b180f..7bc7a3cb9c5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -233,10 +233,6 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-static struct omap_board_config_kernel nokia770_config[] __initdata = {
-	{ OMAP_TAG_USB,		NULL },
-};
-
 #if	defined(CONFIG_OMAP_DSP)
 /*
  * audio power control
@@ -371,19 +367,16 @@ static __init int omap_dsp_init(void)
 
 static void __init omap_nokia770_init(void)
 {
-	nokia770_config[0].data = &nokia770_usb_config;
-
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
-	omap_board_config = nokia770_config;
-	omap_board_config_size = ARRAY_SIZE(nokia770_config);
 	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
 	ads7846_dev_init();
 	mipid_dev_init();
+	omap_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 9c4cac274cc..cf3247b15f8 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -304,7 +304,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_USB,           &osk_usb_config },
 	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
@@ -555,6 +554,8 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
+	omap_usb_init(&osk_usb_config);
+
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
 	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 55d524b78e2..886b4c0569b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -301,7 +301,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 #endif
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
-	{ OMAP_TAG_USB,		&palmte_usb_config },
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
@@ -356,6 +355,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
+	omap_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 9dc9d7931b5..4f1b44831d3 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -279,7 +279,6 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
-	{ OMAP_TAG_USB,		&palmtt_usb_config	},
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
 	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
@@ -304,6 +303,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
+	omap_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index a2f99a46e7b..9a55c3c5821 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -249,7 +249,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
-	{OMAP_TAG_USB,	&palmz71_usb_config},
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
 	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
@@ -323,6 +322,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
+	omap_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index ab277d42f30..c096577695f 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -374,7 +374,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel sx1_config[] __initdata = {
-	{ OMAP_TAG_USB,	&sx1_usb_config },
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
 	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
@@ -389,6 +388,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+	omap_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index a7653542a2b..98275e03dad 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -145,7 +145,6 @@ static struct omap_uart_config voiceblue_uart_config __initdata = {
 };
 
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_USB,  &voiceblue_usb_config },
 	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
@@ -185,6 +184,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
+	omap_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 64561247d93..41823538d36 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -273,7 +273,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 
 static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_UART,	&apollon_uart_config },
-	{ OMAP_TAG_USB,		&apollon_usb_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
@@ -300,6 +299,7 @@ static void __init apollon_usb_init(void)
 	omap_cfg_reg(P21_242X_GPIO12);
 	gpio_request(12, "USB suspend");
 	gpio_direction_output(12, 0);
+	omap_usb_init(&apollon_usb_config);
 }
 
 static void __init omap_apollon_init(void)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 71226973eee..1343cebd19a 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -379,6 +379,39 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
+static struct omap_usb_config h4_usb_config __initdata = {
+#ifdef	CONFIG_MACH_OMAP2_H4_USB1
+	/* NOTE:  usb1 could also be used with 3 wire signaling */
+	.pins[1]	= 4,
+#endif
+
+#ifdef	CONFIG_MACH_OMAP_H4_OTG
+	/* S1.10 ON -- USB OTG port
+	 * usb0 switched to Mini-AB port and isp1301 transceiver;
+	 * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
+	 */
+	.otg		= 1,
+	.pins[0]	= 4,
+#ifdef	CONFIG_USB_GADGET_OMAP
+	/* use OTG cable, or standard A-to-MiniB */
+	.hmc_mode	= 0x14,	/* 0:dev/otg 1:host 2:disable */
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* use OTG cable, or NONSTANDARD (B-to-MiniB) */
+	.hmc_mode	= 0x11,	/* 0:host 1:host 2:disable */
+#endif	/* XX */
+
+#else
+	/* S1.10 OFF -- usb "download port"
+	 * usb0 switched to Mini-B port and isp1105 transceiver;
+	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
+	 */
+	.register_dev	= 1,
+	.pins[0]	= 3,
+/*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
+	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
+#endif
+};
+
 static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
@@ -430,6 +463,7 @@ static void __init omap_h4_init(void)
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap_board_config = h4_config;
 	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 4a0afd2366e..50ea79a0efa 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -17,7 +17,6 @@
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB		0x4f04
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
 #define OMAP_TAG_UART		0x4f07
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index a56a610950c..e033e51d4ba 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -29,6 +29,8 @@
 
 #endif
 
+void omap_usb_init(struct omap_usb_config *pdata);
+
 /*-------------------------------------------------------------------------*/
 
 /*
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index e278de6862a..509f2ed99e2 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -729,30 +729,13 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 
 /*-------------------------------------------------------------------------*/
 
-static struct omap_usb_config platform_data;
-
-static int __init
-omap_usb_init(void)
+void __init omap_usb_init(struct omap_usb_config *pdata)
 {
-	const struct omap_usb_config *config;
-
-	config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
-	if (config == NULL) {
-		printk(KERN_ERR "USB: No board-specific "
-				"platform config found\n");
-		return -ENODEV;
-	}
-	platform_data = *config;
-
 	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
-		omap_otg_init(&platform_data);
+		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
-		omap_1510_usb_init(&platform_data);
-	else {
+		omap_1510_usb_init(pdata);
+	else
 		printk(KERN_ERR "USB: No init for your chip yet\n");
-		return -ENODEV;
-	}
-	return 0;
 }
 
-subsys_initcall(omap_usb_init);
-- 
cgit v1.2.3


From 2bb6c8026ccfa26ba713f4462f661aba7dd4dc16 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Mon, 23 Mar 2009 18:23:46 -0700
Subject: ARM: OMAP3: Remove unused CONFIG_I2C2_OMAP_BEAGLE

There is no CONFIG_I2C2_OMAP_BEAGLE in mainline and it is under
removal in linux-omap also so remove this dead code now.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index e39cd2c46cf..e3c862866b7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -175,9 +175,6 @@ static int __init omap3_beagle_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
 			ARRAY_SIZE(beagle_i2c_boardinfo));
-#ifdef CONFIG_I2C2_OMAP_BEAGLE
-	omap_register_i2c_bus(2, 400, NULL, 0);
-#endif
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
 	omap_register_i2c_bus(3, 100, NULL, 0);
-- 
cgit v1.2.3


From b9d766c767d53a9be1f741a53fe8151354ba1da3 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:23:46 -0700
Subject: ARM: OMAP3: Add more GPIO mux options

This patch adds several new GPIO pins and updates
the pin naming comments.

The patch is based on earlier patches on linux-omap
list by Manikandan Pillai <mani.pillai@ti.com>,
Vaibhav Hiremath <hvaibhav@ti.com> and
David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mux.c             | 27 +++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mux.h | 13 +++++++++++++
 2 files changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index dacb41f130c..026c4fc883a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -453,10 +453,37 @@ MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
 
 
 /* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
+ * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
  * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
  */
+MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 };
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 6a02f8f4c8b..85a62170576 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -838,7 +838,20 @@ enum omap34xx_index {
 	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
 	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
 	 */
+	AF26_34XX_GPIO0,
+	AF22_34XX_GPIO9,
 	AH8_34XX_GPIO29,
+	U8_34XX_GPIO54_OUT,
+	U8_34XX_GPIO54_DOWN,
+	L8_34XX_GPIO63,
+	G25_34XX_GPIO86_OUT,
+	AG4_34XX_GPIO134_OUT,
+	AE4_34XX_GPIO136_OUT,
+	AF6_34XX_GPIO140_UP,
+	AE6_34XX_GPIO141,
+	AF5_34XX_GPIO142,
+	AE5_34XX_GPIO143,
+	H19_34XX_GPIO164_OUT,
 	J25_34XX_GPIO170,
 };
 
-- 
cgit v1.2.3


From 8466032d862a2e52d73af3311bc97f950aaa36c8 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 23 Mar 2009 18:23:46 -0700
Subject: ARM: OMAP3: mmc-twl4030 fix name buffer length, v2

Add 1 to buffer length for null terminator and use snprintf.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 437f52073f6..84cac87537a 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -59,7 +59,7 @@ static struct twl_mmc_controller {
 	struct omap_mmc_platform_data	*mmc;
 	u8		twl_vmmc_dev_grp;
 	u8		twl_mmc_dedicated;
-	char		name[HSMMC_NAME_LEN];
+	char		name[HSMMC_NAME_LEN + 1];
 } hsmmc[] = {
 	{
 		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
@@ -349,7 +349,8 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			return;
 		}
 
-		sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
+		snprintf(twl->name, ARRAY_SIZE(twl->name), "mmc%islot%i",
+				c->mmc, 1);
 		mmc->slots[0].name = twl->name;
 		mmc->nr_slots = 1;
 		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
-- 
cgit v1.2.3


From 0329c3773e59aa7e50dc3760a27fb4e098773d0f Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Mon, 23 Mar 2009 18:23:47 -0700
Subject: ARM: OMAP3: mmc-twl4030 voltage cleanup

Correct twl4030 MMC power switching:  fix voltage ranges reported
for each slot, and handle them fully.

 Lies corrected:
  - MMC-1 doesn't support the 2.6-2.7 Volt range
  - MMC-2 can't normally support anything except 1.8V
 Omissions corrected
  - MMC-1 *does* handle the 2.8-2.9 Volt range
  - MMC-2 can handle 2.5-3.2 Volt cards, given a transceiver

Add transciever support for MMC-2; enable it for Overo and Pandora.
(Depends on something else to have set up pinmuxing for control
signals instead of as MMC2_DAT4..7 pins.)

Also shrink twl4030_hsmmc_info a smidgeon ... padding is all gone.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3pandora.c |   1 +
 arch/arm/mach-omap2/board-overo.c        |   1 +
 arch/arm/mach-omap2/mmc-twl4030.c        | 127 +++++++++++++++++++------------
 arch/arm/mach-omap2/mmc-twl4030.h        |   3 +-
 4 files changed, 84 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b3196107afd..7a46a6563a5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -53,6 +53,7 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 127,
 		.ext_clock	= 1,
+		.transceiver	= true,
 	},
 	{}	/* Terminator */
 };
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b92313c8b84..9c14324d8c6 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -214,6 +214,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 		.wires		= 4,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.transceiver	= true,
 	},
 	{}	/* Terminator */
 };
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 84cac87537a..df1539e2cd0 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -44,6 +44,7 @@
 #define VMMC2_315V		0x0c
 #define VMMC2_300V		0x0b
 #define VMMC2_285V		0x0a
+#define VMMC2_280V		0x09
 #define VMMC2_260V		0x08
 #define VMMC2_185V		0x06
 #define VMMC2_DEDICATED		0x2E
@@ -166,56 +167,73 @@ static int twl_mmc_resume(struct device *dev, int slot)
 /*
  * Sets the MMC voltage in twl4030
  */
+
+#define MMC1_OCR	(MMC_VDD_165_195 \
+		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+#define MMC2_OCR	(MMC_VDD_165_195 \
+		|MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
+		|MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+
 static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
 {
 	int ret;
 	u8 vmmc, dev_grp_val;
 
-	switch (1 << vdd) {
-	case MMC_VDD_35_36:
-	case MMC_VDD_34_35:
-	case MMC_VDD_33_34:
-	case MMC_VDD_32_33:
-	case MMC_VDD_31_32:
-	case MMC_VDD_30_31:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_315V;
-		else
-			vmmc = VMMC2_315V;
-		break;
-	case MMC_VDD_29_30:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_315V;
-		else
-			vmmc = VMMC2_300V;
-		break;
-	case MMC_VDD_27_28:
-	case MMC_VDD_26_27:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_285V;
-		else
-			vmmc = VMMC2_285V;
-		break;
-	case MMC_VDD_25_26:
-	case MMC_VDD_24_25:
-	case MMC_VDD_23_24:
-	case MMC_VDD_22_23:
-	case MMC_VDD_21_22:
-	case MMC_VDD_20_21:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
-			vmmc = VMMC1_285V;
-		else
-			vmmc = VMMC2_260V;
-		break;
-	case MMC_VDD_165_195:
-		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
+		/* VMMC1:  max 220 mA.  And for 8-bit mode,
+		 * VSIM:  max 50 mA
+		 */
+		switch (1 << vdd) {
+		case MMC_VDD_165_195:
 			vmmc = VMMC1_185V;
-		else
+			/* and VSIM_180V */
+			break;
+		case MMC_VDD_28_29:
+			vmmc = VMMC1_285V;
+			/* and VSIM_280V */
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			vmmc = VMMC1_300V;
+			/* and VSIM_300V */
+			break;
+		case MMC_VDD_31_32:
+			vmmc = VMMC1_315V;
+			/* error if VSIM needed */
+			break;
+		default:
+			vmmc = 0;
+			break;
+		}
+	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
+		/* VMMC2:  max 100 mA */
+		switch (1 << vdd) {
+		case MMC_VDD_165_195:
 			vmmc = VMMC2_185V;
-		break;
-	default:
-		vmmc = 0;
-		break;
+			break;
+		case MMC_VDD_25_26:
+		case MMC_VDD_26_27:
+			vmmc = VMMC2_260V;
+			break;
+		case MMC_VDD_27_28:
+			vmmc = VMMC2_280V;
+			break;
+		case MMC_VDD_28_29:
+			vmmc = VMMC2_285V;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			vmmc = VMMC2_300V;
+			break;
+		case MMC_VDD_31_32:
+			vmmc = VMMC2_315V;
+			break;
+		default:
+			vmmc = 0;
+			break;
+		}
+	} else {
+		return 0;
 	}
 
 	if (vmmc)
@@ -242,6 +260,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 	struct twl_mmc_controller *c = &hsmmc[0];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 */
 	if (power_on) {
 		if (cpu_is_omap2430()) {
 			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
@@ -298,6 +324,12 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 	struct twl_mmc_controller *c = &hsmmc[1];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
 
+	/*
+	 * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+	 * VDDS is used to power the pins, optionally with a transceiver to
+	 * support cards using voltages other than VDDS (1.8V nominal).  When a
+	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+	 */
 	if (power_on) {
 		if (mmc->slots[0].internal_clock) {
 			u32 reg;
@@ -353,10 +385,6 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 				c->mmc, 1);
 		mmc->slots[0].name = twl->name;
 		mmc->nr_slots = 1;
-		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
-					MMC_VDD_26_27 | MMC_VDD_27_28 |
-					MMC_VDD_29_30 |
-					MMC_VDD_30_31 | MMC_VDD_31_32;
 		mmc->slots[0].wires = c->wires;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
@@ -392,9 +420,14 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		switch (c->mmc) {
 		case 1:
 			mmc->slots[0].set_power = twl_mmc1_set_power;
+			mmc->slots[0].ocr_mask = MMC1_OCR;
 			break;
 		case 2:
 			mmc->slots[0].set_power = twl_mmc2_set_power;
+			if (c->transceiver)
+				mmc->slots[0].ocr_mask = MMC2_OCR;
+			else
+				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index e1c8076400c..380dde7bcfe 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -9,9 +9,10 @@
 struct twl4030_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
 	u8	wires;		/* 1/4/8 wires */
+	bool	transceiver;	/* MMC-2 option */
+	bool	ext_clock;	/* use external pin for input clock */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
-	int	ext_clock:1;	/* use external pin for input clock */
 };
 
 #if	defined(CONFIG_TWL4030_CORE) && \
-- 
cgit v1.2.3


From 01971f65ff88e3ebe2b6ae42b95d68e26b83718d Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Mon, 23 Mar 2009 18:23:47 -0700
Subject: ARM: OMAP3: mmc-twl4030 init passes device nodes back, v2

When setting up HSMMC devices, pass the device nodes back so
board code can linking them to their power supply regulators.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 10 ++++++++++
 arch/arm/mach-omap2/mmc-twl4030.h     |  1 +
 arch/arm/plat-omap/devices.c          |  3 +++
 arch/arm/plat-omap/include/mach/mmc.h |  2 ++
 4 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index df1539e2cd0..c67078db07b 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <mach/control.h>
@@ -437,6 +438,15 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 	}
 
 	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+	/* pass the device nodes back to board setup code */
+	for (c = controllers; c->mmc; c++) {
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc)
+			continue;
+		c->dev = mmc->dev;
+	}
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 380dde7bcfe..21d35727f92 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -13,6 +13,7 @@ struct twl4030_hsmmc_info {
 	bool	ext_clock;	/* use external pin for input clock */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
+	struct device *dev;	/* returned: pointer to mmc adapter */
 };
 
 #if	defined(CONFIG_TWL4030_CORE) && \
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 208dbb121f4..87fb7ff4179 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -228,6 +228,9 @@ int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	ret = platform_device_add(pdev);
 	if (ret)
 		goto fail;
+
+	/* return device handle to board setup code */
+	data->dev = &pdev->dev;
 	return 0;
 
 fail:
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 73a9e15031b..4435bd434e1 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -37,6 +37,8 @@
 #define OMAP_MMC_MAX_SLOTS	2
 
 struct omap_mmc_platform_data {
+	/* back-link to device */
+	struct device *dev;
 
 	/* number of slots per controller */
 	unsigned nr_slots:2;
-- 
cgit v1.2.3


From 07d83cc9c839a5f05c7c1b6d823a8f483bda0441 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Mon, 23 Mar 2009 18:23:47 -0700
Subject: ARM: OMAP3: mmc-twl4030 add MMC3 support, v2

Device connected to MMC3 is assumed to be self-powered, so
set_power() function is empty. It can't be omited because
host driver requires it.

Array size for hsmmc[] is specified to allocate to allocate
an instance for the third MMC controller.

Also fix a leak which happens if invalid controller id
is passed.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3pandora.c |  6 ++++++
 arch/arm/mach-omap2/mmc-twl4030.c        | 19 +++++++++++++++++--
 2 files changed, 23 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7a46a6563a5..6e17180c1a5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -55,6 +55,12 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 		.ext_clock	= 1,
 		.transceiver	= true,
 	},
+	{
+		.mmc		= 3,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
 	{}	/* Terminator */
 };
 
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index c67078db07b..d9fad8dda15 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -62,7 +62,7 @@ static struct twl_mmc_controller {
 	u8		twl_vmmc_dev_grp;
 	u8		twl_mmc_dedicated;
 	char		name[HSMMC_NAME_LEN + 1];
-} hsmmc[] = {
+} hsmmc[OMAP34XX_NR_MMC] = {
 	{
 		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
 		.twl_mmc_dedicated		= VMMC1_DEDICATED,
@@ -347,6 +347,16 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 	return ret;
 }
 
+static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
+		int vdd)
+{
+	/*
+	 * Assume MMC3 has self-powered device connected, for example on-board
+	 * chip with external power source.
+	 */
+	return 0;
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -415,7 +425,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 
 		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
 		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that OMAP's MMC3 isn't used.
+		 * and that MMC3 device has it's own power source.
 		 */
 
 		switch (c->mmc) {
@@ -430,8 +440,13 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			else
 				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
 			break;
+		case 3:
+			mmc->slots[0].set_power = twl_mmc3_set_power;
+			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			kfree(mmc);
 			continue;
 		}
 		hsmmc_data[c->mmc - 1] = mmc;
-- 
cgit v1.2.3


From 034ae7b41720a26cadd4b2f02bf0b23e79240344 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Mon, 23 Mar 2009 18:23:48 -0700
Subject: ARM: OMAP3: mmc-twl4030 fix for vmmc = 0

Resolve longstanding issue noted by Adrian Hunter:  confusion
between settting VSEL=0 (which is 1.8V on MMC1) and poweroff.

Also, leave VSEL alone if we're just powering the regulator off.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index d9fad8dda15..d43421400e9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -178,7 +178,10 @@ static int twl_mmc_resume(struct device *dev, int slot)
 static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
 {
 	int ret;
-	u8 vmmc, dev_grp_val;
+	u8 vmmc = 0, dev_grp_val;
+
+	if (!vdd)
+		goto doit;
 
 	if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
 		/* VMMC1:  max 220 mA.  And for 8-bit mode,
@@ -203,8 +206,7 @@ static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
 			/* error if VSIM needed */
 			break;
 		default:
-			vmmc = 0;
-			break;
+			return -EINVAL;
 		}
 	} else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
 		/* VMMC2:  max 100 mA */
@@ -230,21 +232,21 @@ static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
 			vmmc = VMMC2_315V;
 			break;
 		default:
-			vmmc = 0;
-			break;
+			return -EINVAL;
 		}
 	} else {
-		return 0;
+		return -EINVAL;
 	}
 
-	if (vmmc)
+doit:
+	if (vdd)
 		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
 	else
 		dev_grp_val = LDO_CLR;		/* Power down */
 
 	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
 					dev_grp_val, c->twl_vmmc_dev_grp);
-	if (ret)
+	if (ret || !vdd)
 		return ret;
 
 	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-- 
cgit v1.2.3


From 8d75e98b5880f8f02be68ddc3cc4e3d433630d7b Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 23 Mar 2009 18:23:48 -0700
Subject: ARM: OMAP3: mmc-twl4030 add cover switch

Allow a cover switch to be used to cause a rescan of the
MMC slot.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 13 ++++++++++++-
 arch/arm/mach-omap2/mmc-twl4030.h |  1 +
 2 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index d43421400e9..e2b2aeb713d 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -100,6 +100,14 @@ static int twl_mmc_get_ro(struct device *dev, int slot)
 	return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
 }
 
+static int twl_mmc_get_cover_state(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	/* NOTE: assumes card detect signal is active-low */
+	return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+}
+
 /*
  * MMC Slot Initialization.
  */
@@ -411,7 +419,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 
 			mmc->slots[0].switch_pin = c->gpio_cd;
 			mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
-			mmc->slots[0].card_detect = twl_mmc_card_detect;
+			if (c->cover_only)
+				mmc->slots[0].get_cover_state = twl_mmc_get_cover_state;
+			else
+				mmc->slots[0].card_detect = twl_mmc_card_detect;
 		} else
 			mmc->slots[0].switch_pin = -EINVAL;
 
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 21d35727f92..0aa168690ed 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -11,6 +11,7 @@ struct twl4030_hsmmc_info {
 	u8	wires;		/* 1/4/8 wires */
 	bool	transceiver;	/* MMC-2 option */
 	bool	ext_clock;	/* use external pin for input clock */
+	bool	cover_only;	/* No card detect - just cover switch */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	struct device *dev;	/* returned: pointer to mmc adapter */
-- 
cgit v1.2.3


From e51151a53fc85fb1730ec4d6c1474275dcdb9ec3 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 23 Mar 2009 18:23:48 -0700
Subject: ARM: OMAP3: mmc-twl4030 allow arbitrary slot names, v3

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 7 +++++--
 arch/arm/mach-omap2/mmc-twl4030.h | 1 +
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index e2b2aeb713d..dc40b3e7220 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -402,8 +402,11 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			return;
 		}
 
-		snprintf(twl->name, ARRAY_SIZE(twl->name), "mmc%islot%i",
-				c->mmc, 1);
+		if (c->name)
+			strncpy(twl->name, c->name, HSMMC_NAME_LEN);
+		else
+			snprintf(twl->name, ARRAY_SIZE(twl->name),
+				"mmc%islot%i", c->mmc, 1);
 		mmc->slots[0].name = twl->name;
 		mmc->nr_slots = 1;
 		mmc->slots[0].wires = c->wires;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 0aa168690ed..ea59e862429 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -14,6 +14,7 @@ struct twl4030_hsmmc_info {
 	bool	cover_only;	/* No card detect - just cover switch */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
+	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
 };
 
-- 
cgit v1.2.3


From 828c707e6dbd0ca7882f721a466ff28729376ff0 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 23 Mar 2009 18:23:49 -0700
Subject: ARM: OMAP3: Add base address definitions and resources for OMAP 3 IS,
 v2

This replaces earlier patch from Sergio Aguirre titled "[REVIEW PATCH 03/14]
OMAP34XX: CAM: Resources fixes".

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c              | 108 +++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/omap34xx.h |  27 ++++++++
 2 files changed, 135 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 14537ffd8af..7b2af1ba553 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -28,6 +28,113 @@
 #include <mach/eac.h>
 #include <mach/mmc.h>
 
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
+
+static struct resource cam_resources[] = {
+	{
+		.start		= OMAP24XX_CAMERA_BASE,
+		.end		= OMAP24XX_CAMERA_BASE + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_24XX_CAM_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device omap_cam_device = {
+	.name		= "omap24xxcam",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cam_resources),
+	.resource	= cam_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+	platform_device_register(&omap_cam_device);
+}
+
+#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+
+static struct resource omap3isp_resources[] = {
+	{
+		.start		= OMAP3430_ISP_BASE,
+		.end		= OMAP3430_ISP_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CBUFF_BASE,
+		.end		= OMAP3430_ISP_CBUFF_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CCP2_BASE,
+		.end		= OMAP3430_ISP_CCP2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CCDC_BASE,
+		.end		= OMAP3430_ISP_CCDC_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_HIST_BASE,
+		.end		= OMAP3430_ISP_HIST_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_H3A_BASE,
+		.end		= OMAP3430_ISP_H3A_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_PREV_BASE,
+		.end		= OMAP3430_ISP_PREV_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_RESZ_BASE,
+		.end		= OMAP3430_ISP_RESZ_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_SBL_BASE,
+		.end		= OMAP3430_ISP_SBL_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CSI2A_BASE,
+		.end		= OMAP3430_ISP_CSI2A_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3430_ISP_CSI2PHY_BASE,
+		.end		= OMAP3430_ISP_CSI2PHY_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_34XX_CAM_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device omap3isp_device = {
+	.name		= "omap3isp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3isp_resources),
+	.resource	= omap3isp_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+	platform_device_register(&omap3isp_device);
+}
+#else
+static inline void omap_init_camera(void)
+{
+}
+#endif
+
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
 #define MBOX_REG_SIZE	0x120
@@ -527,6 +634,7 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_hsmmc_reset();
+	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();
 	omap_hdq_init();
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index 89173f16b9b..1b1c35d2169 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -49,6 +49,33 @@
 #define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
 
 #define OMAP34XX_IC_BASE	0x48200000
+
+#define OMAP3430_ISP_BASE		(L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE		(OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE		(OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE		(OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE		(OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE		(OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE		(OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE		(OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE		(OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE		(OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_BASE		(OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSI2PHY_BASE	(OMAP3430_ISP_BASE + 0x1970)
+
+#define OMAP3430_ISP_END		(OMAP3430_ISP_BASE         + 0x06F)
+#define OMAP3430_ISP_CBUFF_END		(OMAP3430_ISP_CBUFF_BASE   + 0x077)
+#define OMAP3430_ISP_CCP2_END		(OMAP3430_ISP_CCP2_BASE    + 0x1EF)
+#define OMAP3430_ISP_CCDC_END		(OMAP3430_ISP_CCDC_BASE    + 0x0A7)
+#define OMAP3430_ISP_HIST_END		(OMAP3430_ISP_HIST_BASE    + 0x047)
+#define OMAP3430_ISP_H3A_END		(OMAP3430_ISP_H3A_BASE     + 0x05F)
+#define OMAP3430_ISP_PREV_END		(OMAP3430_ISP_PREV_BASE    + 0x09F)
+#define OMAP3430_ISP_RESZ_END		(OMAP3430_ISP_RESZ_BASE    + 0x0AB)
+#define OMAP3430_ISP_SBL_END		(OMAP3430_ISP_SBL_BASE     + 0x0FB)
+#define OMAP3430_ISP_MMU_END		(OMAP3430_ISP_MMU_BASE     + 0x06F)
+#define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
+#define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+
 #define OMAP34XX_IVA_INTC_BASE	0x40000000
 #define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
 #define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
-- 
cgit v1.2.3


From 18cb7aca6f94357d78d99970ec0bd5933ac4495d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Mon, 23 Mar 2009 18:34:06 -0700
Subject: ARM: OMAP3: MUSB initialization for omap hw, v2

Create a generic board-file for initializing usb
on omap2430 and omap3 boards.

Patch modified by Tony to build the module based on
CONFIG_USB_MUSB_SOC. Also merged in a patch adding
the nop xceiv from Ajay Kumar Gupta <ajay.gupta@ti.com>.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile             |   4 +
 arch/arm/mach-omap2/board-2430sdp.c      |   2 +
 arch/arm/mach-omap2/board-ldp.c          |   2 +
 arch/arm/mach-omap2/board-omap3beagle.c  |   2 +
 arch/arm/mach-omap2/board-omap3pandora.c |   2 +
 arch/arm/mach-omap2/board-overo.c        |   2 +
 arch/arm/mach-omap2/usb-musb.c           | 187 +++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/usb.h    |   8 ++
 8 files changed, 209 insertions(+)
 create mode 100644 arch/arm/mach-omap2/usb-musb.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bbd12bc10fd..29f6ca94c36 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -39,3 +39,7 @@ obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 
+# Platform specific device init code
+ifeq ($(CONFIG_USB_MUSB_SOC),y)
+obj-y					+= usb-musb.o
+endif
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index c8abe6a8dfe..21ee2195eb5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -35,6 +35,7 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/gpmc.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -254,6 +255,7 @@ static void __init omap_2430sdp_init(void)
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
+	usb_musb_init();
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f035d7836e5..92661e5df93 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -37,6 +37,7 @@
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <mach/control.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -164,6 +165,7 @@ static void __init omap_ldp_init(void)
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
+	usb_musb_init();
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index e3c862866b7..2f3d821e634 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 #include <mach/mux.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -313,6 +314,7 @@ static void __init omap3_beagle_init(void)
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
+	usb_musb_init();
 	omap3beagle_flash_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 6e17180c1a5..16e2128daa1 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -34,6 +34,7 @@
 #include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -200,6 +201,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	usb_musb_init();
 }
 
 static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9c14324d8c6..d3ceed398e0 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -43,6 +43,7 @@
 #include <mach/gpmc.h>
 #include <mach/hardware.h>
 #include <mach/nand.h>
+#include <mach/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -228,6 +229,7 @@ static void __init overo_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	overo_flash_init();
+	usb_musb_init();
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
new file mode 100644
index 00000000000..fc74e913c41
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -0,0 +1,187 @@
+/*
+ * linux/arch/arm/mach-omap2/usb-musb.c
+ *
+ * This file will contain the board specific details for the
+ * MENTOR USB OTG controller on OMAP3430
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Vikram Pandita
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <linux/usb/musb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+
+static struct resource musb_resources[] = {
+	[0] = { /* start and end set dynamically */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= INT_243X_HS_USB_MC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= INT_243X_HS_USB_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static int clk_on;
+
+static int musb_set_clock(struct clk *clk, int state)
+{
+	if (state) {
+		if (clk_on > 0)
+			return -ENODEV;
+
+		clk_enable(clk);
+		clk_on = 1;
+	} else {
+		if (clk_on == 0)
+			return -ENODEV;
+
+		clk_disable(clk);
+		clk_on = 0;
+	}
+
+	return 0;
+}
+
+static struct musb_hdrc_eps_bits musb_eps[] = {
+	{	"ep1_tx", 10,	},
+	{	"ep1_rx", 10,	},
+	{	"ep2_tx", 9,	},
+	{	"ep2_rx", 9,	},
+	{	"ep3_tx", 3,	},
+	{	"ep3_rx", 3,	},
+	{	"ep4_tx", 3,	},
+	{	"ep4_rx", 3,	},
+	{	"ep5_tx", 3,	},
+	{	"ep5_rx", 3,	},
+	{	"ep6_tx", 3,	},
+	{	"ep6_rx", 3,	},
+	{	"ep7_tx", 3,	},
+	{	"ep7_rx", 3,	},
+	{	"ep8_tx", 2,	},
+	{	"ep8_rx", 2,	},
+	{	"ep9_tx", 2,	},
+	{	"ep9_rx", 2,	},
+	{	"ep10_tx", 2,	},
+	{	"ep10_rx", 2,	},
+	{	"ep11_tx", 2,	},
+	{	"ep11_rx", 2,	},
+	{	"ep12_tx", 2,	},
+	{	"ep12_rx", 2,	},
+	{	"ep13_tx", 2,	},
+	{	"ep13_rx", 2,	},
+	{	"ep14_tx", 2,	},
+	{	"ep14_rx", 2,	},
+	{	"ep15_tx", 2,	},
+	{	"ep15_rx", 2,	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 1,
+	.dyn_fifo	= 1,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 16,
+	.dma_channels	= 7,
+	.dma_req_chan	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
+	.ram_bits	= 12,
+	.eps_bits	= musb_eps,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#ifdef CONFIG_USB_MUSB_OTG
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	/* .clock is set dynamically */
+	.set_clock	= musb_set_clock,
+	.config		= &musb_config,
+
+	/* REVISIT charge pump on TWL4030 can supply up to
+	 * 100 mA ... but this value is board-specific, like
+	 * "mode", and should be passed to usb_musb_init().
+	 */
+	.power		= 50,			/* up to 100 mA */
+};
+
+static u64 musb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+
+#ifdef CONFIG_NOP_USB_XCEIV
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+	.name		= "nop_usb_xceiv",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &nop_xceiv_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= NULL,
+	},
+};
+#endif
+
+void __init usb_musb_init(void)
+{
+	if (cpu_is_omap243x())
+		musb_resources[0].start = OMAP243X_HS_BASE;
+	else
+		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
+	musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+
+	/*
+	 * REVISIT: This line can be removed once all the platforms using
+	 * musb_core.c have been converted to use use clkdev.
+	 */
+	musb_plat.clock = "ick";
+
+#ifdef CONFIG_NOP_USB_XCEIV
+	if (platform_device_register(&nop_xceiv_device) < 0) {
+		printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
+		return;
+	}
+#endif
+
+	if (platform_device_register(&musb_device) < 0) {
+		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+		return;
+	}
+}
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index e033e51d4ba..69f0ceed500 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,6 +27,14 @@
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
+#ifdef CONFIG_USB_MUSB_SOC
+extern void usb_musb_init(void);
+#else
+static inline void usb_musb_init(void)
+{
+}
+#endif
+
 #endif
 
 void omap_usb_init(struct omap_usb_config *pdata);
-- 
cgit v1.2.3


From c6a81316c721a20639871f08cf0cbff7e83889b4 Mon Sep 17 00:00:00 2001
From: Steve Sakoman <sakoman@gmail.com>
Date: Mon, 23 Mar 2009 18:38:16 -0700
Subject: ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform, v3

An upcoming Overo expansion board includes an ADS7846 touchscreen controller.

This patch adds support via the ads7846 driver when enabled in the
kernel config.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-overo.c | 60 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index d3ceed398e0..782268c9194 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -57,6 +57,65 @@
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
 
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#include <mach/mcspi.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OVERO_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+static void __init overo_ads7846_init(void)
+{
+	if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
+		gpio_export(OVERO_GPIO_PENDOWN, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(overo_spi_board_info,
+			ARRAY_SIZE(overo_spi_board_info));
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -230,6 +289,7 @@ static void __init overo_init(void)
 	twl4030_mmc_init(mmc);
 	overo_flash_init();
 	usb_musb_init();
+	overo_ads7846_init();
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
-- 
cgit v1.2.3


From 6fdc29e262f9a776a77f50ca9157f7c0dcfbbbc8 Mon Sep 17 00:00:00 2001
From: Syed Mohammed Khasim <x0khasim@ti.com>
Date: Mon, 23 Mar 2009 18:38:16 -0700
Subject: ARM: OMAP3: Add support for 3430 SDP, v4

Add support for 3430 SDP.

Various updates have been merged into this patch from
the linux-omap list.

Patch updated to initialize regulators by David Brownell
<dbrownell@users.sourceforge.net>.

Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap_3430sdp_defconfig | 2061 +++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/Kconfig             |    6 +-
 arch/arm/mach-omap2/Makefile            |    2 +
 arch/arm/mach-omap2/board-3430sdp.c     |  542 ++++++++
 4 files changed, 2610 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/configs/omap_3430sdp_defconfig
 create mode 100644 arch/arm/mach-omap2/board-3430sdp.c

(limited to 'arch')

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
new file mode 100644
index 00000000000..8fb918d9ba6
--- /dev/null
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -0,0 +1,2061 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 14:17:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+# CONFIG_DVB_TUNER_CX24113 is not set
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+CONFIG_SND_OMAP_SOC_SDP3430=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3754b79092a..64ad5c04b64 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -58,4 +58,8 @@ config MACH_OVERO
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3430SDP
+	bool "OMAP 3430 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 29f6ca94c36..809416dc644 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -38,6 +38,8 @@ obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
+					   mmc-twl4030.o
 
 # Platform specific device init code
 ifeq ($(CONFIG_USB_MUSB_SOC),y)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
new file mode 100644
index 00000000000..2af38e56db3
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -0,0 +1,542 @@
+/*
+ * linux/arch/arm/mach-omap2/board-3430sdp.c
+ *
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+
+#include <mach/control.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+#define CONFIG_DISABLE_HFCLK 1
+
+#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
+#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
+#define SDP3430_SMC91X_CS		3
+
+#define SDP3430_TS_GPIO_IRQ_SDPV1	3
+#define SDP3430_TS_GPIO_IRQ_SDPV2	2
+
+#define ENABLE_VAUX3_DEDICATED	0x03
+#define ENABLE_VAUX3_DEV_GRP	0x20
+
+#define TWL4030_MSECURE_GPIO 22
+
+static struct resource sdp3430_smc91x_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device sdp3430_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
+	.resource	= sdp3430_smc91x_resources,
+};
+
+static int sdp3430_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_A),
+	KEY(0, 3, KEY_B),
+	KEY(0, 4, KEY_C),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_F),
+	KEY(1, 4, KEY_G),
+	KEY(2, 0, KEY_ENTER),
+	KEY(2, 1, KEY_I),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_K),
+	KEY(2, 4, KEY_3),
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P),
+	KEY(3, 4, KEY_Q),
+	KEY(4, 0, KEY_R),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_T),
+	KEY(4, 3, KEY_U),
+	KEY(4, 4, KEY_D),
+	KEY(5, 0, KEY_V),
+	KEY(5, 1, KEY_W),
+	KEY(5, 2, KEY_L),
+	KEY(5, 3, KEY_S),
+	KEY(5, 4, KEY_H),
+	0
+};
+
+static struct twl4030_keypad_data sdp3430_kp_data = {
+	.rows		= 5,
+	.cols		= 6,
+	.keymap		= sdp3430_keymap,
+	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
+	.rep		= 1,
+};
+
+static int ts_gpio;	/* Needed for ads7846_get_pendown_state */
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
+};
+
+static struct platform_device sdp3430_lcd_device = {
+	.name		= "sdp2430_lcd",
+	.id		= -1,
+};
+
+static struct regulator_consumer_supply sdp3430_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &sdp3430_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &sdp3430_lcd_device.dev,
+};
+
+static struct platform_device *sdp3430_devices[] __initdata = {
+	&sdp3430_smc91x_device,
+	&sdp3430_lcd_device,
+};
+
+static inline void __init sdp3430_init_smc91x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = SDP3430_SMC91X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
+	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	udelay(100);
+
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
+	else
+		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
+
+	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
+
+	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+			eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+	sdp3430_init_smc91x();
+}
+
+static struct omap_uart_config sdp3430_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config sdp3430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel sdp3430_config[] __initdata = {
+	{ OMAP_TAG_UART,	&sdp3430_uart_config },
+	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
+};
+
+static int sdp3430_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
+8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
+5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
+4040,   3910,   3790,   3670,   3550
+};
+
+static struct twl4030_bci_platform_data sdp3430_bci_data = {
+	.battery_tmp_tbl	= sdp3430_batt_table,
+	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		/* 8 bits (default) requires S6.3 == ON,
+		 * so the SIM card isn't used; else 4 bits.
+		 */
+		.wires		= 8,
+		.gpio_wp	= 4,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_wp	= 7,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply sdp3430_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
+static int sdp3430_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	 */
+	sdp3430_vmmc1_supply.dev = mmc[0].dev;
+	sdp3430_vsim_supply.dev = mmc[0].dev;
+	sdp3430_vmmc2_supply.dev = mmc[1].dev;
+
+	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
+	gpio_request(gpio + 7, "sub_lcd_en_bkl");
+	gpio_direction_output(gpio + 7, 0);
+
+	/* gpio + 15 is "sub_lcd_nRST" (output) */
+	gpio_request(gpio + 15, "sub_lcd_nRST");
+	gpio_direction_output(gpio + 15, 0);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
+				| BIT(16) | BIT(17),
+	.setup		= sdp3430_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data sdp3430_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_madc_platform_data sdp3430_madc_data = {
+	.irq_line	= 1,
+};
+
+/*
+ * Apply all the fixed voltages since most versions of U-Boot
+ * don't bother with that initialization.
+ */
+
+/* VAUX1 for mainboard (irda and sub-lcd) */
+static struct regulator_init_data sdp3430_vaux1 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX2 for camera module */
+static struct regulator_init_data sdp3430_vaux2 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX3 for LCD board */
+static struct regulator_init_data sdp3430_vaux3 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX4 for OMAP VDD_CSI2 (camera) */
+static struct regulator_init_data sdp3430_vaux4 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp3430_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data sdp3430_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data sdp3430_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data sdp3430_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data sdp3430_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &sdp3430_vdvi_supply,
+};
+
+static struct twl4030_platform_data sdp3430_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.bci		= &sdp3430_bci_data,
+	.gpio		= &sdp3430_gpio_data,
+	.madc		= &sdp3430_madc_data,
+	.keypad		= &sdp3430_kp_data,
+	.usb		= &sdp3430_usb_data,
+
+	.vaux1		= &sdp3430_vaux1,
+	.vaux2		= &sdp3430_vaux2,
+	.vaux3		= &sdp3430_vaux3,
+	.vaux4		= &sdp3430_vaux4,
+	.vmmc1		= &sdp3430_vmmc1,
+	.vmmc2		= &sdp3430_vmmc2,
+	.vsim		= &sdp3430_vsim,
+	.vdac		= &sdp3430_vdac,
+	.vpll2		= &sdp3430_vpll2,
+};
+
+static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &sdp3430_twldata,
+	},
+};
+
+static int __init omap3430_i2c_init(void)
+{
+	/* i2c1 for PMIC only */
+	omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
+			ARRAY_SIZE(sdp3430_i2c_boardinfo));
+	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	/* i2c3 on display connector (for DVI, tfp410) */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static void __init omap_3430sdp_init(void)
+{
+	omap3430_i2c_init();
+	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+	else
+		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
+	sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(sdp3430_spi_board_info,
+				ARRAY_SIZE(sdp3430_spi_board_info));
+	ads7846_dev_init();
+	omap_serial_init();
+	usb_musb_init();
+}
+
+static void __init omap_3430sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
+	/* Maintainer: Syed Khasim - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_3430sdp_map_io,
+	.init_irq	= omap_3430sdp_init_irq,
+	.init_machine	= omap_3430sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
-- 
cgit v1.2.3


From ffe7f95bb1a4d1e9ca5d252445dc38476e1a208e Mon Sep 17 00:00:00 2001
From: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Date: Mon, 23 Mar 2009 18:38:17 -0700
Subject: ARM OMAP3: Initial support for Nokia RX-51, v3

Adds board files and related headers for Nokia RX-51
Internet Tablet.

This patch has been updated with some clean-up patches
posted earlier to linux-omap list.

Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/rx51_defconfig              | 1821 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/Kconfig                  |    4 +
 arch/arm/mach-omap2/Makefile                 |    2 +
 arch/arm/mach-omap2/board-rx51-peripherals.c |  419 ++++++
 arch/arm/mach-omap2/board-rx51.c             |   96 ++
 5 files changed, 2342 insertions(+)
 create mode 100644 arch/arm/configs/rx51_defconfig
 create mode 100644 arch/arm/mach-omap2/board-rx51-peripherals.c
 create mode 100644 arch/arm/mach-omap2/board-rx51.c

(limited to 'arch')

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
new file mode 100644
index 00000000000..593102da8cd
--- /dev/null
+++ b/arch/arm/configs/rx51_defconfig
@@ -0,0 +1,1821 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 15:28:56 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+CONFIG_MACH_NOKIA_RX51=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ad5c04b64..64ab386a65c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -63,3 +63,7 @@ config MACH_OMAP3_PANDORA
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_NOKIA_RX51
+	bool "Nokia RX-51 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 809416dc644..e08e482b89f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -41,6 +41,8 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
 
+obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-peripherals.o \
 # Platform specific device init code
 ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y					+= usb-musb.o
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
new file mode 100644
index 00000000000..a7381729645
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -0,0 +1,419 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ *
+ * Copyright (C) 2008-2009 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+
+#define SMC91X_CS			1
+#define SMC91X_GPIO_IRQ			54
+#define SMC91X_GPIO_RESET		164
+#define SMC91X_GPIO_PWRDWN		86
+
+static struct resource rx51_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device rx51_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
+	.resource	= rx51_smc91x_resources,
+};
+
+static int rx51_keymap[] = {
+	KEY(0, 0, KEY_Q),
+	KEY(0, 1, KEY_W),
+	KEY(0, 2, KEY_E),
+	KEY(0, 3, KEY_R),
+	KEY(0, 4, KEY_T),
+	KEY(0, 5, KEY_Y),
+	KEY(0, 6, KEY_U),
+	KEY(0, 7, KEY_I),
+	KEY(1, 0, KEY_O),
+	KEY(1, 1, KEY_D),
+	KEY(1, 2, KEY_DOT),
+	KEY(1, 3, KEY_V),
+	KEY(1, 4, KEY_DOWN),
+	KEY(2, 0, KEY_P),
+	KEY(2, 1, KEY_F),
+	KEY(2, 2, KEY_UP),
+	KEY(2, 3, KEY_B),
+	KEY(2, 4, KEY_RIGHT),
+	KEY(3, 0, KEY_COMMA),
+	KEY(3, 1, KEY_G),
+	KEY(3, 2, KEY_ENTER),
+	KEY(3, 3, KEY_N),
+	KEY(4, 0, KEY_BACKSPACE),
+	KEY(4, 1, KEY_H),
+	KEY(4, 3, KEY_M),
+	KEY(4, 4, KEY_LEFTCTRL),
+	KEY(5, 1, KEY_J),
+	KEY(5, 2, KEY_Z),
+	KEY(5, 3, KEY_SPACE),
+	KEY(5, 4, KEY_LEFTSHIFT),
+	KEY(6, 0, KEY_A),
+	KEY(6, 1, KEY_K),
+	KEY(6, 2, KEY_X),
+	KEY(6, 3, KEY_SPACE),
+	KEY(6, 4, KEY_FN),
+	KEY(7, 0, KEY_S),
+	KEY(7, 1, KEY_L),
+	KEY(7, 2, KEY_C),
+	KEY(7, 3, KEY_LEFT),
+	KEY(0xff, 0, KEY_F6),
+	KEY(0xff, 1, KEY_F7),
+	KEY(0xff, 2, KEY_F8),
+	KEY(0xff, 4, KEY_F9),
+	KEY(0xff, 5, KEY_F10),
+};
+
+static struct twl4030_keypad_data rx51_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= rx51_keymap,
+	.keymapsize	= ARRAY_SIZE(rx51_keymap),
+	.rep		= 1,
+};
+
+static struct platform_device *rx51_peripherals_devices[] = {
+	&rx51_smc91x_device,
+};
+
+/*
+ * Timings are taken from smsc-lan91c96-ms.pdf
+ */
+static int smc91x_init_gpmc(int cs)
+{
+	struct gpmc_timings t;
+	const int t2_r = 45;		/* t2 in Figure 12.10 */
+	const int t2_w = 30;		/* t2 in Figure 12.11 */
+	const int t3 = 15;		/* t3 in Figure 12.10 */
+	const int t5_r = 0;		/* t5 in Figure 12.10 */
+	const int t6_r = 45;		/* t6 in Figure 12.10 */
+	const int t6_w = 0;		/* t6 in Figure 12.11 */
+	const int t7_w = 15;		/* t7 in Figure 12.11 */
+	const int t15 = 12;		/* t15 in Figure 12.2 */
+	const int t20 = 185;		/* t20 in Figure 12.2 */
+
+	memset(&t, 0, sizeof(t));
+
+	t.cs_on = t15;
+	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
+	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
+	t.adv_on = t3;			/* Figure 12.10 */
+	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
+	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
+	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
+	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
+	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
+	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
+	t.rd_cycle = t20;		/* Figure 12.2 */
+	t.wr_cycle = t20;		/* Figure 12.4 */
+	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
+	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
+
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void __init rx51_init_smc91x(void)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
+	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
+
+	smc91x_init_gpmc(SMC91X_CS);
+
+	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(SMC91X_GPIO_IRQ);
+	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
+
+	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
+	if (ret)
+		goto free2;
+	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
+
+	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
+	if (ret)
+		goto free3;
+	gpio_direction_output(SMC91X_GPIO_RESET, 0);
+	gpio_set_value(SMC91X_GPIO_RESET, 1);
+	msleep(100);
+	gpio_set_value(SMC91X_GPIO_RESET, 0);
+
+	return;
+
+free3:
+	gpio_free(SMC91X_GPIO_PWRDWN);
+free2:
+	gpio_free(SMC91X_GPIO_IRQ);
+free1:
+	gpmc_cs_free(SMC91X_CS);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
+
+static struct twl4030_madc_platform_data rx51_madc_data = {
+	.irq_line		= 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.name		= "external",
+		.mmc		= 1,
+		.wires		= 4,
+		.cover_only	= true,
+		.gpio_cd	= 160,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply rx51_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vmmc2_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct regulator_init_data rx51_vaux1 = {
+	.constraints = {
+		.name			= "V28",
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data rx51_vaux2 = {
+	.constraints = {
+		.name			= "VCSI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VAUX3 - adds more power to VIO_18 rail */
+static struct regulator_init_data rx51_vaux3 = {
+	.constraints = {
+		.name			= "VCAM_DIG_18",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data rx51_vaux4 = {
+	.constraints = {
+		.name			= "VCAM_ANA_28",
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data rx51_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc1_supply,
+};
+
+static struct regulator_init_data rx51_vmmc2 = {
+	.constraints = {
+		.name			= "VMMC2_30",
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vmmc2_supply,
+};
+
+static struct regulator_init_data rx51_vsim = {
+	.constraints = {
+		.name			= "VMMC2_IO_18",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &rx51_vsim_supply,
+};
+
+static struct regulator_init_data rx51_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
+{
+	/* FIXME this gpio setup is just a placeholder for now */
+	gpio_request(gpio + 6, "backlight_pwm");
+	gpio_direction_output(gpio + 6, 0);
+	gpio_request(gpio + 7, "speaker_en");
+	gpio_direction_output(gpio + 7, 1);
+
+	/* set up MMC adapters, linking their regulators to them */
+	twl4030_mmc_init(mmc);
+	rx51_vmmc1_supply.dev = mmc[0].dev;
+	rx51_vmmc2_supply.dev = mmc[1].dev;
+	rx51_vsim_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data rx51_gpio_data = {
+	.gpio_base		= OMAP_MAX_GPIO_LINES,
+	.irq_base		= TWL4030_GPIO_IRQ_BASE,
+	.irq_end		= TWL4030_GPIO_IRQ_END,
+	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
+				| BIT(4) | BIT(5)
+				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
+				| BIT(12) | BIT(13) | BIT(14) | BIT(15)
+				| BIT(16) | BIT(17) ,
+	.setup			= rx51_twlgpio_setup,
+};
+
+static struct twl4030_platform_data rx51_twldata = {
+	.irq_base		= TWL4030_IRQ_BASE,
+	.irq_end		= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio			= &rx51_gpio_data,
+	.keypad			= &rx51_kp_data,
+	.madc			= &rx51_madc_data,
+
+	.vaux1			= &rx51_vaux1,
+	.vaux2			= &rx51_vaux2,
+	.vaux3			= &rx51_vaux3,
+	.vaux4			= &rx51_vaux4,
+	.vmmc1			= &rx51_vmmc1,
+	.vmmc2			= &rx51_vmmc2,
+	.vsim			= &rx51_vsim,
+	.vdac			= &rx51_vdac,
+};
+
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
+	{
+		I2C_BOARD_INFO("twl5030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &rx51_twldata,
+	},
+};
+
+static int __init rx51_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+	omap_register_i2c_bus(2, 100, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+
+void __init rx51_peripherals_init(void)
+{
+	platform_add_devices(rx51_peripherals_devices,
+				ARRAY_SIZE(rx51_peripherals_devices));
+	rx51_i2c_init();
+	rx51_init_smc91x();
+}
+
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
new file mode 100644
index 00000000000..6a3c5e53d99
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51.c
+ *
+ * Copyright (C) 2007, 2008 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/usb.h>
+
+static struct omap_uart_config rx51_uart_config = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config rx51_lcd_config = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_fbmem_config rx51_fbmem0_config = {
+	.size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem1_config = {
+	.size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem2_config = {
+	.size = 752 * 1024,
+};
+
+static struct omap_board_config_kernel rx51_config[] = {
+	{ OMAP_TAG_UART,	&rx51_uart_config },
+	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
+	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
+	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
+	{ OMAP_TAG_LCD,		&rx51_lcd_config },
+};
+
+static void __init rx51_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+extern void __init rx51_peripherals_init(void);
+
+static void __init rx51_init(void)
+{
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
+	omap_serial_init();
+	usb_musb_init();
+	rx51_peripherals_init();
+}
+
+static void __init rx51_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
+	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= rx51_map_io,
+	.init_irq	= rx51_init_irq,
+	.init_machine	= rx51_init,
+	.timer		= &omap_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 5201b0a47b83aba66e1e348d18f3f9a7bc17d612 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 21 Mar 2009 13:50:58 +0800
Subject: avr32: remove duplicated #include

Remove duplicated #include in arch/avr32/boards/hammerhead/flash.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/hammerhead/flash.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c
index a98c6dd3a02..559bbcb03f9 100644
--- a/arch/avr32/boards/hammerhead/flash.c
+++ b/arch/avr32/boards/hammerhead/flash.c
@@ -15,7 +15,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/isp116x.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
 
 #include <mach/portmux.h>
-- 
cgit v1.2.3


From f0b85051d0f0891378a83db22c0786f1d756fbff Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:01 +0100
Subject: KVM: SVM: Clean up VINTR setting

The current VINTR intercept setters don't look clean to me. To make
the code easier to read and enable the possibilty to trap on a VINTR
set, this uses a helper function to set the VINTR intercept.

v2 uses two distinct functions for setting and clearing the bit

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index a9e769e4e25..33407d95761 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -718,6 +718,16 @@ static void svm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 	to_svm(vcpu)->vmcb->save.rflags = rflags;
 }
 
+static void svm_set_vintr(struct vcpu_svm *svm)
+{
+	svm->vmcb->control.intercept |= 1ULL << INTERCEPT_VINTR;
+}
+
+static void svm_clear_vintr(struct vcpu_svm *svm)
+{
+	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VINTR);
+}
+
 static struct vmcb_seg *svm_seg(struct kvm_vcpu *vcpu, int seg)
 {
 	struct vmcb_save_area *save = &to_svm(vcpu)->vmcb->save;
@@ -1380,7 +1390,7 @@ static int interrupt_window_interception(struct vcpu_svm *svm,
 {
 	KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
 
-	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VINTR);
+	svm_clear_vintr(svm);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
 	 * If the user space waits to inject interrupts, exit as soon as
@@ -1593,7 +1603,7 @@ static void svm_intr_assist(struct kvm_vcpu *vcpu)
 	    (vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) ||
 	    (vmcb->control.event_inj & SVM_EVTINJ_VALID)) {
 		/* unable to deliver irq, set pending irq */
-		vmcb->control.intercept |= (1ULL << INTERCEPT_VINTR);
+		svm_set_vintr(svm);
 		svm_inject_irq(svm, 0x0);
 		goto out;
 	}
@@ -1652,9 +1662,9 @@ static void do_interrupt_requests(struct kvm_vcpu *vcpu,
 	 */
 	if (!svm->vcpu.arch.interrupt_window_open &&
 	    (svm->vcpu.arch.irq_summary || kvm_run->request_interrupt_window))
-		control->intercept |= 1ULL << INTERCEPT_VINTR;
-	 else
-		control->intercept &= ~(1ULL << INTERCEPT_VINTR);
+		svm_set_vintr(svm);
+	else
+		svm_clear_vintr(svm);
 }
 
 static int svm_set_tss_addr(struct kvm *kvm, unsigned int addr)
-- 
cgit v1.2.3


From 9962d032bbff0268f22068787831405f8468c8b4 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:02 +0100
Subject: KVM: SVM: Move EFER and MSR constants to generic x86 code

MSR_EFER_SVME_MASK, MSR_VM_CR and MSR_VM_HSAVE_PA are set in KVM
specific headers. Linux does have nice header files to collect
EFER bits and MSR IDs, so IMHO we should put them there.

While at it, I also changed the naming scheme to match that
of the other defines.

(introduced in v6)

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h  | 1 +
 arch/x86/include/asm/msr-index.h | 7 +++++++
 arch/x86/include/asm/svm.h       | 4 ----
 arch/x86/include/asm/virtext.h   | 2 +-
 arch/x86/kvm/svm.c               | 6 +++---
 5 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 730843d1d2f..2998efe8927 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -22,6 +22,7 @@
 #include <asm/pvclock-abi.h>
 #include <asm/desc.h>
 #include <asm/mtrr.h>
+#include <asm/msr-index.h>
 
 #define KVM_MAX_VCPUS 16
 #define KVM_MEMORY_SLOTS 32
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 358acc59ae0..46e9646e7a6 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -18,11 +18,13 @@
 #define _EFER_LME		8  /* Long mode enable */
 #define _EFER_LMA		10 /* Long mode active (read-only) */
 #define _EFER_NX		11 /* No execute enable */
+#define _EFER_SVME		12 /* Enable virtualization */
 
 #define EFER_SCE		(1<<_EFER_SCE)
 #define EFER_LME		(1<<_EFER_LME)
 #define EFER_LMA		(1<<_EFER_LMA)
 #define EFER_NX			(1<<_EFER_NX)
+#define EFER_SVME		(1<<_EFER_SVME)
 
 /* Intel MSRs. Some also available on other CPUs */
 #define MSR_IA32_PERFCTR0		0x000000c1
@@ -360,4 +362,9 @@
 #define MSR_IA32_VMX_PROCBASED_CTLS2    0x0000048b
 #define MSR_IA32_VMX_EPT_VPID_CAP       0x0000048c
 
+/* AMD-V MSRs */
+
+#define MSR_VM_CR                       0xc0010114
+#define MSR_VM_HSAVE_PA                 0xc0010117
+
 #endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 1b8afa78e86..82ada75f3eb 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -174,10 +174,6 @@ struct __attribute__ ((__packed__)) vmcb {
 #define SVM_CPUID_FEATURE_SHIFT 2
 #define SVM_CPUID_FUNC 0x8000000a
 
-#define MSR_EFER_SVME_MASK (1ULL << 12)
-#define MSR_VM_CR       0xc0010114
-#define MSR_VM_HSAVE_PA 0xc0010117ULL
-
 #define SVM_VM_CR_SVM_DISABLE 4
 
 #define SVM_SELECTOR_S_SHIFT 4
diff --git a/arch/x86/include/asm/virtext.h b/arch/x86/include/asm/virtext.h
index 59363627523..e0f9aa16358 100644
--- a/arch/x86/include/asm/virtext.h
+++ b/arch/x86/include/asm/virtext.h
@@ -118,7 +118,7 @@ static inline void cpu_svm_disable(void)
 
 	wrmsrl(MSR_VM_HSAVE_PA, 0);
 	rdmsrl(MSR_EFER, efer);
-	wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
+	wrmsrl(MSR_EFER, efer & ~EFER_SVME);
 }
 
 /** Makes sure SVM is disabled, if it is supported on the CPU
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 33407d95761..e4eb3fd91b9 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -198,7 +198,7 @@ static void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 	if (!npt_enabled && !(efer & EFER_LMA))
 		efer &= ~EFER_LME;
 
-	to_svm(vcpu)->vmcb->save.efer = efer | MSR_EFER_SVME_MASK;
+	to_svm(vcpu)->vmcb->save.efer = efer | EFER_SVME;
 	vcpu->arch.shadow_efer = efer;
 }
 
@@ -292,7 +292,7 @@ static void svm_hardware_enable(void *garbage)
 	svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
 
 	rdmsrl(MSR_EFER, efer);
-	wrmsrl(MSR_EFER, efer | MSR_EFER_SVME_MASK);
+	wrmsrl(MSR_EFER, efer | EFER_SVME);
 
 	wrmsrl(MSR_VM_HSAVE_PA,
 	       page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
@@ -559,7 +559,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	init_sys_seg(&save->ldtr, SEG_TYPE_LDT);
 	init_sys_seg(&save->tr, SEG_TYPE_BUSY_TSS16);
 
-	save->efer = MSR_EFER_SVME_MASK;
+	save->efer = EFER_SVME;
 	save->dr6 = 0xffff0ff0;
 	save->dr7 = 0x400;
 	save->rflags = 2;
-- 
cgit v1.2.3


From c0725420cfdcf6dd9705b164a8c6cba86684080d Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:03 +0100
Subject: KVM: SVM: Add helper functions for nested SVM

These are helpers for the nested SVM implementation.

- nsvm_printk implements a debug printk variant
- nested_svm_do calls a handler that can accesses gpa-based memory

v3 makes use of the new permission checker
v6 changes:
- streamline nsvm_debug()
- remove printk(KERN_ERR)
- SVME check before CPL check
- give GP error code
- use new EFER constant

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e4eb3fd91b9..87debdcd1b9 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -50,6 +50,15 @@ MODULE_LICENSE("GPL");
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
+/* Turn on to get debugging output*/
+/* #define NESTED_DEBUG */
+
+#ifdef NESTED_DEBUG
+#define nsvm_printk(fmt, args...) printk(KERN_INFO fmt, ## args)
+#else
+#define nsvm_printk(fmt, args...) do {} while(0)
+#endif
+
 /* enable NPT for AMD64 and X86 with PAE */
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static bool npt_enabled = true;
@@ -1149,6 +1158,82 @@ static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int nested_svm_check_permissions(struct vcpu_svm *svm)
+{
+	if (!(svm->vcpu.arch.shadow_efer & EFER_SVME)
+	    || !is_paging(&svm->vcpu)) {
+		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	if (svm->vmcb->save.cpl) {
+		kvm_inject_gp(&svm->vcpu, 0);
+		return 1;
+	}
+
+       return 0;
+}
+
+static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
+{
+	struct page *page;
+
+	down_read(&current->mm->mmap_sem);
+	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
+	up_read(&current->mm->mmap_sem);
+
+	if (is_error_page(page)) {
+		printk(KERN_INFO "%s: could not find page at 0x%llx\n",
+		       __func__, gpa);
+		kvm_release_page_clean(page);
+		kvm_inject_gp(&svm->vcpu, 0);
+		return NULL;
+	}
+	return page;
+}
+
+static int nested_svm_do(struct vcpu_svm *svm,
+			 u64 arg1_gpa, u64 arg2_gpa, void *opaque,
+			 int (*handler)(struct vcpu_svm *svm,
+					void *arg1,
+					void *arg2,
+					void *opaque))
+{
+	struct page *arg1_page;
+	struct page *arg2_page = NULL;
+	void *arg1;
+	void *arg2 = NULL;
+	int retval;
+
+	arg1_page = nested_svm_get_page(svm, arg1_gpa);
+	if(arg1_page == NULL)
+		return 1;
+
+	if (arg2_gpa) {
+		arg2_page = nested_svm_get_page(svm, arg2_gpa);
+		if(arg2_page == NULL) {
+			kvm_release_page_clean(arg1_page);
+			return 1;
+		}
+	}
+
+	arg1 = kmap_atomic(arg1_page, KM_USER0);
+	if (arg2_gpa)
+		arg2 = kmap_atomic(arg2_page, KM_USER1);
+
+	retval = handler(svm, arg1, arg2, opaque);
+
+	kunmap_atomic(arg1, KM_USER0);
+	if (arg2_gpa)
+		kunmap_atomic(arg2, KM_USER1);
+
+	kvm_release_page_dirty(arg1_page);
+	if (arg2_gpa)
+		kvm_release_page_dirty(arg2_page);
+
+	return retval;
+}
+
 static int invalid_op_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
-- 
cgit v1.2.3


From 1371d90460189d02bf1bcca19dbfe6bd10dc6031 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:04 +0100
Subject: KVM: SVM: Implement GIF, clgi and stgi

This patch implements the GIF flag and the clgi and stgi instructions that
set this flag. Only if the flag is set (default), interrupts can be received by
the CPU.

To keep the information about that somewhere, this patch adds a new hidden
flags vector. that is used to store information that does not go into the
vmcb, but is SVM specific.

I tried to write some code to make -no-kvm-irqchip work too, but the first
level guest won't even boot with that atm, so I ditched it.

v2 moves the hflags to x86 generic code
v3 makes use of the new permission helper
v6 only enables interrupt_window if GIF=1

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  3 +++
 arch/x86/kvm/svm.c              | 47 ++++++++++++++++++++++++++++++++++++-----
 2 files changed, 45 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 2998efe8927..29e4157732d 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -259,6 +259,7 @@ struct kvm_vcpu_arch {
 	unsigned long cr3;
 	unsigned long cr4;
 	unsigned long cr8;
+	u32 hflags;
 	u64 pdptrs[4]; /* pae */
 	u64 shadow_efer;
 	u64 apic_base;
@@ -738,6 +739,8 @@ enum {
 	TASK_SWITCH_GATE = 3,
 };
 
+#define HF_GIF_MASK		(1 << 0)
+
 /*
  * Hardware virtualization extension instructions may fault if a
  * reboot turns off virtualization while processes are running.
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 87debdcd1b9..79cc06bfe57 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -251,7 +251,7 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	kvm_rip_write(vcpu, svm->next_rip);
 	svm->vmcb->control.int_state &= ~SVM_INTERRUPT_SHADOW_MASK;
 
-	vcpu->arch.interrupt_window_open = 1;
+	vcpu->arch.interrupt_window_open = (svm->vcpu.arch.hflags & HF_GIF_MASK);
 }
 
 static int has_svm(void)
@@ -600,6 +600,8 @@ static void init_vmcb(struct vcpu_svm *svm)
 		save->cr4 = 0;
 	}
 	force_new_asid(&svm->vcpu);
+
+	svm->vcpu.arch.hflags = HF_GIF_MASK;
 }
 
 static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
@@ -1234,6 +1236,36 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
+static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	if (nested_svm_check_permissions(svm))
+		return 1;
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+
+	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+
+	return 1;
+}
+
+static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	if (nested_svm_check_permissions(svm))
+		return 1;
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+
+	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+
+	/* After a CLGI no interrupts should come */
+	svm_clear_vintr(svm);
+	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
+
+	return 1;
+}
+
 static int invalid_op_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
@@ -1535,8 +1567,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_VMMCALL]			= vmmcall_interception,
 	[SVM_EXIT_VMLOAD]			= invalid_op_interception,
 	[SVM_EXIT_VMSAVE]			= invalid_op_interception,
-	[SVM_EXIT_STGI]				= invalid_op_interception,
-	[SVM_EXIT_CLGI]				= invalid_op_interception,
+	[SVM_EXIT_STGI]				= stgi_interception,
+	[SVM_EXIT_CLGI]				= clgi_interception,
 	[SVM_EXIT_SKINIT]			= invalid_op_interception,
 	[SVM_EXIT_WBINVD]                       = emulate_on_interception,
 	[SVM_EXIT_MONITOR]			= invalid_op_interception,
@@ -1684,6 +1716,9 @@ static void svm_intr_assist(struct kvm_vcpu *vcpu)
 	if (!kvm_cpu_has_interrupt(vcpu))
 		goto out;
 
+	if (!(svm->vcpu.arch.hflags & HF_GIF_MASK))
+		goto out;
+
 	if (!(vmcb->save.rflags & X86_EFLAGS_IF) ||
 	    (vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) ||
 	    (vmcb->control.event_inj & SVM_EVTINJ_VALID)) {
@@ -1710,7 +1745,8 @@ static void kvm_reput_irq(struct vcpu_svm *svm)
 	}
 
 	svm->vcpu.arch.interrupt_window_open =
-		!(control->int_state & SVM_INTERRUPT_SHADOW_MASK);
+		!(control->int_state & SVM_INTERRUPT_SHADOW_MASK) &&
+		 (svm->vcpu.arch.hflags & HF_GIF_MASK);
 }
 
 static void svm_do_inject_vector(struct vcpu_svm *svm)
@@ -1734,7 +1770,8 @@ static void do_interrupt_requests(struct kvm_vcpu *vcpu,
 
 	svm->vcpu.arch.interrupt_window_open =
 		(!(control->int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		 (svm->vmcb->save.rflags & X86_EFLAGS_IF));
+		 (svm->vmcb->save.rflags & X86_EFLAGS_IF) &&
+		 (svm->vcpu.arch.hflags & HF_GIF_MASK));
 
 	if (svm->vcpu.arch.interrupt_window_open && svm->vcpu.arch.irq_summary)
 		/*
-- 
cgit v1.2.3


From b286d5d8b0836e76832dafcc5a18b0e8e5a3bc5e Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:05 +0100
Subject: KVM: SVM: Implement hsave

Implement the hsave MSR, that gives the VCPU a GPA to save the
old guest state in.

v2 allows userspace to save/restore hsave
v4 dummys out the hsave MSR, so we use a host page
v6 remembers the guest's hsave and exports the MSR

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/kvm_svm.h |  2 ++
 arch/x86/kvm/svm.c     | 13 +++++++++++++
 arch/x86/kvm/x86.c     |  2 +-
 3 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
index 8e5ee99551f..a0877cac7b9 100644
--- a/arch/x86/kvm/kvm_svm.h
+++ b/arch/x86/kvm/kvm_svm.h
@@ -41,6 +41,8 @@ struct vcpu_svm {
 	unsigned long host_dr7;
 
 	u32 *msrpm;
+	struct vmcb *hsave;
+	u64 hsave_msr;
 };
 
 #endif
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 79cc06bfe57..59aaff1c959 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -626,6 +626,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	struct vcpu_svm *svm;
 	struct page *page;
 	struct page *msrpm_pages;
+	struct page *hsave_page;
 	int err;
 
 	svm = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
@@ -651,6 +652,11 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	svm->msrpm = page_address(msrpm_pages);
 	svm_vcpu_init_msrpm(svm->msrpm);
 
+	hsave_page = alloc_page(GFP_KERNEL);
+	if (!hsave_page)
+		goto uninit;
+	svm->hsave = page_address(hsave_page);
+
 	svm->vmcb = page_address(page);
 	clear_page(svm->vmcb);
 	svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
@@ -680,6 +686,7 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu)
 
 	__free_page(pfn_to_page(svm->vmcb_pa >> PAGE_SHIFT));
 	__free_pages(virt_to_page(svm->msrpm), MSRPM_ALLOC_ORDER);
+	__free_page(virt_to_page(svm->hsave));
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, svm);
 }
@@ -1377,6 +1384,9 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	case MSR_IA32_LASTINTTOIP:
 		*data = svm->vmcb->save.last_excp_to;
 		break;
+	case MSR_VM_HSAVE_PA:
+		*data = svm->hsave_msr;
+		break;
 	default:
 		return kvm_get_msr_common(vcpu, ecx, data);
 	}
@@ -1470,6 +1480,9 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		 */
 		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
 
+		break;
+	case MSR_VM_HSAVE_PA:
+		svm->hsave_msr = data;
 		break;
 	default:
 		return kvm_set_msr_common(vcpu, ecx, data);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 758b7a155ae..99165a961f0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -456,7 +456,7 @@ static u32 msrs_to_save[] = {
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
 	MSR_IA32_TIME_STAMP_COUNTER, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
-	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT
+	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
 };
 
 static unsigned num_msrs_to_save;
-- 
cgit v1.2.3


From 5542675baa7e62ca4d18278c8758b6a4ec410639 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:06 +0100
Subject: KVM: SVM: Add VMLOAD and VMSAVE handlers

This implements the VMLOAD and VMSAVE instructions, that usually surround
the VMRUN instructions. Both instructions load / restore the same elements,
so we only need to implement them once.

v2 fixes CPL checking and replaces memcpy by assignments
v3 makes use of the new permission checking

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 58 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 59aaff1c959..a83c94eb577 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1243,6 +1243,62 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
+static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
+{
+	to_vmcb->save.fs = from_vmcb->save.fs;
+	to_vmcb->save.gs = from_vmcb->save.gs;
+	to_vmcb->save.tr = from_vmcb->save.tr;
+	to_vmcb->save.ldtr = from_vmcb->save.ldtr;
+	to_vmcb->save.kernel_gs_base = from_vmcb->save.kernel_gs_base;
+	to_vmcb->save.star = from_vmcb->save.star;
+	to_vmcb->save.lstar = from_vmcb->save.lstar;
+	to_vmcb->save.cstar = from_vmcb->save.cstar;
+	to_vmcb->save.sfmask = from_vmcb->save.sfmask;
+	to_vmcb->save.sysenter_cs = from_vmcb->save.sysenter_cs;
+	to_vmcb->save.sysenter_esp = from_vmcb->save.sysenter_esp;
+	to_vmcb->save.sysenter_eip = from_vmcb->save.sysenter_eip;
+
+	return 1;
+}
+
+static int nested_svm_vmload(struct vcpu_svm *svm, void *nested_vmcb,
+			     void *arg2, void *opaque)
+{
+	return nested_svm_vmloadsave((struct vmcb *)nested_vmcb, svm->vmcb);
+}
+
+static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
+			     void *arg2, void *opaque)
+{
+	return nested_svm_vmloadsave(svm->vmcb, (struct vmcb *)nested_vmcb);
+}
+
+static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	if (nested_svm_check_permissions(svm))
+		return 1;
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+
+	nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmload);
+
+	return 1;
+}
+
+static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	if (nested_svm_check_permissions(svm))
+		return 1;
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+
+	nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmsave);
+
+	return 1;
+}
+
 static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	if (nested_svm_check_permissions(svm))
@@ -1578,8 +1634,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_SHUTDOWN]			= shutdown_interception,
 	[SVM_EXIT_VMRUN]			= invalid_op_interception,
 	[SVM_EXIT_VMMCALL]			= vmmcall_interception,
-	[SVM_EXIT_VMLOAD]			= invalid_op_interception,
-	[SVM_EXIT_VMSAVE]			= invalid_op_interception,
+	[SVM_EXIT_VMLOAD]			= vmload_interception,
+	[SVM_EXIT_VMSAVE]			= vmsave_interception,
 	[SVM_EXIT_STGI]				= stgi_interception,
 	[SVM_EXIT_CLGI]				= clgi_interception,
 	[SVM_EXIT_SKINIT]			= invalid_op_interception,
-- 
cgit v1.2.3


From 3d6368ef580a4dff012960834bba4e28d3c1430c Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:07 +0100
Subject: KVM: SVM: Add VMRUN handler

This patch implements VMRUN. VMRUN enters a virtual CPU and runs that
in the same context as the normal guest CPU would run.
So basically it is implemented the same way, a normal CPU would do it.

We also prepare all intercepts that get OR'ed with the original
intercepts, as we do not allow a level 2 guest to be intercepted less
than the first level guest.

v2 implements the following improvements:

- fixes the CPL check
- does not allocate iopm when not used
- remembers the host's IF in the HIF bit in the hflags

v3:

- make use of the new permission checking
- add support for V_INTR_MASKING_MASK

v4:

- use host page backed hsave

v5:

- remove IOPM merging code

v6:

- save cr4 so PAE l1 guests work

v7:

- return 0 on vmrun so we check the MSRs too
- fix MSR check to use the correct variable

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |   2 +
 arch/x86/kvm/kvm_svm.h          |   8 ++
 arch/x86/kvm/svm.c              | 157 +++++++++++++++++++++++++++++++++++++++-
 3 files changed, 165 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 29e4157732d..53779309514 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -740,6 +740,8 @@ enum {
 };
 
 #define HF_GIF_MASK		(1 << 0)
+#define HF_HIF_MASK		(1 << 1)
+#define HF_VINTR_MASK		(1 << 2)
 
 /*
  * Hardware virtualization extension instructions may fault if a
diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
index a0877cac7b9..91673413d8f 100644
--- a/arch/x86/kvm/kvm_svm.h
+++ b/arch/x86/kvm/kvm_svm.h
@@ -43,6 +43,14 @@ struct vcpu_svm {
 	u32 *msrpm;
 	struct vmcb *hsave;
 	u64 hsave_msr;
+
+	u64 nested_vmcb;
+
+	/* These are the merged vectors */
+	u32 *nested_msrpm;
+
+	/* gpa pointers to the real vectors */
+	u64 nested_vmcb_msrpm;
 };
 
 #endif
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index a83c94eb577..fad187cbfab 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -77,6 +77,11 @@ static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 	return container_of(vcpu, struct vcpu_svm, vcpu);
 }
 
+static inline bool is_nested(struct vcpu_svm *svm)
+{
+	return svm->nested_vmcb;
+}
+
 static unsigned long iopm_base;
 
 struct kvm_ldttss_desc {
@@ -601,6 +606,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	}
 	force_new_asid(&svm->vcpu);
 
+	svm->nested_vmcb = 0;
 	svm->vcpu.arch.hflags = HF_GIF_MASK;
 }
 
@@ -627,6 +633,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	struct page *page;
 	struct page *msrpm_pages;
 	struct page *hsave_page;
+	struct page *nested_msrpm_pages;
 	int err;
 
 	svm = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
@@ -649,6 +656,11 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
 	if (!msrpm_pages)
 		goto uninit;
+
+	nested_msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
+	if (!nested_msrpm_pages)
+		goto uninit;
+
 	svm->msrpm = page_address(msrpm_pages);
 	svm_vcpu_init_msrpm(svm->msrpm);
 
@@ -657,6 +669,8 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 		goto uninit;
 	svm->hsave = page_address(hsave_page);
 
+	svm->nested_msrpm = page_address(nested_msrpm_pages);
+
 	svm->vmcb = page_address(page);
 	clear_page(svm->vmcb);
 	svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
@@ -687,6 +701,7 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu)
 	__free_page(pfn_to_page(svm->vmcb_pa >> PAGE_SHIFT));
 	__free_pages(virt_to_page(svm->msrpm), MSRPM_ALLOC_ORDER);
 	__free_page(virt_to_page(svm->hsave));
+	__free_pages(virt_to_page(svm->nested_msrpm), MSRPM_ALLOC_ORDER);
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, svm);
 }
@@ -1243,6 +1258,123 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
+
+static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
+				  void *arg2, void *opaque)
+{
+	int i;
+	u32 *nested_msrpm = (u32*)arg1;
+	for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
+		svm->nested_msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested_msrpm);
+
+	return 0;
+}
+
+static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
+			    void *arg2, void *opaque)
+{
+	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	struct vmcb *hsave = svm->hsave;
+
+	/* nested_vmcb is our indicator if nested SVM is activated */
+	svm->nested_vmcb = svm->vmcb->save.rax;
+
+	/* Clear internal status */
+	svm->vcpu.arch.exception.pending = false;
+
+	/* Save the old vmcb, so we don't need to pick what we save, but
+	   can restore everything when a VMEXIT occurs */
+	memcpy(hsave, svm->vmcb, sizeof(struct vmcb));
+	/* We need to remember the original CR3 in the SPT case */
+	if (!npt_enabled)
+		hsave->save.cr3 = svm->vcpu.arch.cr3;
+	hsave->save.cr4 = svm->vcpu.arch.cr4;
+	hsave->save.rip = svm->next_rip;
+
+	if (svm->vmcb->save.rflags & X86_EFLAGS_IF)
+		svm->vcpu.arch.hflags |= HF_HIF_MASK;
+	else
+		svm->vcpu.arch.hflags &= ~HF_HIF_MASK;
+
+	/* Load the nested guest state */
+	svm->vmcb->save.es = nested_vmcb->save.es;
+	svm->vmcb->save.cs = nested_vmcb->save.cs;
+	svm->vmcb->save.ss = nested_vmcb->save.ss;
+	svm->vmcb->save.ds = nested_vmcb->save.ds;
+	svm->vmcb->save.gdtr = nested_vmcb->save.gdtr;
+	svm->vmcb->save.idtr = nested_vmcb->save.idtr;
+	svm->vmcb->save.rflags = nested_vmcb->save.rflags;
+	svm_set_efer(&svm->vcpu, nested_vmcb->save.efer);
+	svm_set_cr0(&svm->vcpu, nested_vmcb->save.cr0);
+	svm_set_cr4(&svm->vcpu, nested_vmcb->save.cr4);
+	if (npt_enabled) {
+		svm->vmcb->save.cr3 = nested_vmcb->save.cr3;
+		svm->vcpu.arch.cr3 = nested_vmcb->save.cr3;
+	} else {
+		kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
+		kvm_mmu_reset_context(&svm->vcpu);
+	}
+	svm->vmcb->save.cr2 = nested_vmcb->save.cr2;
+	kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, nested_vmcb->save.rax);
+	kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, nested_vmcb->save.rsp);
+	kvm_register_write(&svm->vcpu, VCPU_REGS_RIP, nested_vmcb->save.rip);
+	/* In case we don't even reach vcpu_run, the fields are not updated */
+	svm->vmcb->save.rax = nested_vmcb->save.rax;
+	svm->vmcb->save.rsp = nested_vmcb->save.rsp;
+	svm->vmcb->save.rip = nested_vmcb->save.rip;
+	svm->vmcb->save.dr7 = nested_vmcb->save.dr7;
+	svm->vmcb->save.dr6 = nested_vmcb->save.dr6;
+	svm->vmcb->save.cpl = nested_vmcb->save.cpl;
+
+	/* We don't want a nested guest to be more powerful than the guest,
+	   so all intercepts are ORed */
+	svm->vmcb->control.intercept_cr_read |=
+		nested_vmcb->control.intercept_cr_read;
+	svm->vmcb->control.intercept_cr_write |=
+		nested_vmcb->control.intercept_cr_write;
+	svm->vmcb->control.intercept_dr_read |=
+		nested_vmcb->control.intercept_dr_read;
+	svm->vmcb->control.intercept_dr_write |=
+		nested_vmcb->control.intercept_dr_write;
+	svm->vmcb->control.intercept_exceptions |=
+		nested_vmcb->control.intercept_exceptions;
+
+	svm->vmcb->control.intercept |= nested_vmcb->control.intercept;
+
+	svm->nested_vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
+
+	force_new_asid(&svm->vcpu);
+	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
+	svm->vmcb->control.exit_int_info_err = nested_vmcb->control.exit_int_info_err;
+	svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl | V_INTR_MASKING_MASK;
+	if (nested_vmcb->control.int_ctl & V_IRQ_MASK) {
+		nsvm_printk("nSVM Injecting Interrupt: 0x%x\n",
+				nested_vmcb->control.int_ctl);
+	}
+	if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK)
+		svm->vcpu.arch.hflags |= HF_VINTR_MASK;
+	else
+		svm->vcpu.arch.hflags &= ~HF_VINTR_MASK;
+
+	nsvm_printk("nSVM exit_int_info: 0x%x | int_state: 0x%x\n",
+			nested_vmcb->control.exit_int_info,
+			nested_vmcb->control.int_state);
+
+	svm->vmcb->control.int_vector = nested_vmcb->control.int_vector;
+	svm->vmcb->control.int_state = nested_vmcb->control.int_state;
+	svm->vmcb->control.tsc_offset += nested_vmcb->control.tsc_offset;
+	if (nested_vmcb->control.event_inj & SVM_EVTINJ_VALID)
+		nsvm_printk("Injecting Event: 0x%x\n",
+				nested_vmcb->control.event_inj);
+	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
+	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
+
+	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+
+	return 0;
+}
+
 static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 {
 	to_vmcb->save.fs = from_vmcb->save.fs;
@@ -1299,6 +1431,26 @@ static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	nsvm_printk("VMrun\n");
+	if (nested_svm_check_permissions(svm))
+		return 1;
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+
+	if (nested_svm_do(svm, svm->vmcb->save.rax, 0,
+			  NULL, nested_svm_vmrun))
+		return 1;
+
+	if (nested_svm_do(svm, svm->nested_vmcb_msrpm, 0,
+		      NULL, nested_svm_vmrun_msrpm))
+		return 1;
+
+	return 1;
+}
+
 static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	if (nested_svm_check_permissions(svm))
@@ -1632,7 +1784,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_MSR]				= msr_interception,
 	[SVM_EXIT_TASK_SWITCH]			= task_switch_interception,
 	[SVM_EXIT_SHUTDOWN]			= shutdown_interception,
-	[SVM_EXIT_VMRUN]			= invalid_op_interception,
+	[SVM_EXIT_VMRUN]			= vmrun_interception,
 	[SVM_EXIT_VMMCALL]			= vmmcall_interception,
 	[SVM_EXIT_VMLOAD]			= vmload_interception,
 	[SVM_EXIT_VMSAVE]			= vmsave_interception,
@@ -1939,7 +2091,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	svm->host_cr2 = kvm_read_cr2();
 	svm->host_dr6 = read_dr6();
 	svm->host_dr7 = read_dr7();
-	svm->vmcb->save.cr2 = vcpu->arch.cr2;
+	if (!is_nested(svm))
+		svm->vmcb->save.cr2 = vcpu->arch.cr2;
 	/* required for live migration with NPT */
 	if (npt_enabled)
 		svm->vmcb->save.cr3 = vcpu->arch.cr3;
-- 
cgit v1.2.3


From cf74a78b229d07f77416d2fe1f029f183a8a31df Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:08 +0100
Subject: KVM: SVM: Add VMEXIT handler and intercepts

This adds the #VMEXIT intercept, so we return to the level 1 guest
when something happens in the level 2 guest that should return to
the level 1 guest.

v2 implements HIF handling and cleans up exception interception
v3 adds support for V_INTR_MASKING_MASK
v4 uses the host page hsave
v5 removes IOPM merging code
v6 moves mmu code out of the atomic section

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 293 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 293 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index fad187cbfab..4cb2920b152 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -72,6 +72,13 @@ module_param(npt, int, S_IRUGO);
 static void kvm_reput_irq(struct vcpu_svm *svm);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
+static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
+static int nested_svm_vmexit(struct vcpu_svm *svm);
+static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
+			     void *arg2, void *opaque);
+static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
+				      bool has_error_code, u32 error_code);
+
 static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 {
 	return container_of(vcpu, struct vcpu_svm, vcpu);
@@ -221,6 +228,11 @@ static void svm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	/* If we are within a nested VM we'd better #VMEXIT and let the
+	   guest handle the exception */
+	if (nested_svm_check_exception(svm, nr, has_error_code, error_code))
+		return;
+
 	svm->vmcb->control.event_inj = nr
 		| SVM_EVTINJ_VALID
 		| (has_error_code ? SVM_EVTINJ_VALID_ERR : 0)
@@ -1198,6 +1210,46 @@ static int nested_svm_check_permissions(struct vcpu_svm *svm)
        return 0;
 }
 
+static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
+				      bool has_error_code, u32 error_code)
+{
+	if (is_nested(svm)) {
+		svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
+		svm->vmcb->control.exit_code_hi = 0;
+		svm->vmcb->control.exit_info_1 = error_code;
+		svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
+		if (nested_svm_exit_handled(svm, false)) {
+			nsvm_printk("VMexit -> EXCP 0x%x\n", nr);
+
+			nested_svm_vmexit(svm);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static inline int nested_svm_intr(struct vcpu_svm *svm)
+{
+	if (is_nested(svm)) {
+		if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
+			return 0;
+
+		if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
+			return 0;
+
+		svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+
+		if (nested_svm_exit_handled(svm, false)) {
+			nsvm_printk("VMexit -> INTR\n");
+			nested_svm_vmexit(svm);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
 static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
 {
 	struct page *page;
@@ -1258,6 +1310,228 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
+static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
+					void *arg1,
+					void *arg2,
+					void *opaque)
+{
+	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	bool kvm_overrides = *(bool *)opaque;
+	u32 exit_code = svm->vmcb->control.exit_code;
+
+	if (kvm_overrides) {
+		switch (exit_code) {
+		case SVM_EXIT_INTR:
+		case SVM_EXIT_NMI:
+			return 0;
+		/* For now we are always handling NPFs when using them */
+		case SVM_EXIT_NPF:
+			if (npt_enabled)
+				return 0;
+			break;
+		/* When we're shadowing, trap PFs */
+		case SVM_EXIT_EXCP_BASE + PF_VECTOR:
+			if (!npt_enabled)
+				return 0;
+			break;
+		default:
+			break;
+		}
+	}
+
+	switch (exit_code) {
+	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
+		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
+		if (nested_vmcb->control.intercept_cr_read & cr_bits)
+			return 1;
+		break;
+	}
+	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
+		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
+		if (nested_vmcb->control.intercept_cr_write & cr_bits)
+			return 1;
+		break;
+	}
+	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
+		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
+		if (nested_vmcb->control.intercept_dr_read & dr_bits)
+			return 1;
+		break;
+	}
+	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
+		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
+		if (nested_vmcb->control.intercept_dr_write & dr_bits)
+			return 1;
+		break;
+	}
+	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
+		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
+		if (nested_vmcb->control.intercept_exceptions & excp_bits)
+			return 1;
+		break;
+	}
+	default: {
+		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
+		nsvm_printk("exit code: 0x%x\n", exit_code);
+		if (nested_vmcb->control.intercept & exit_bits)
+			return 1;
+	}
+	}
+
+	return 0;
+}
+
+static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
+				       void *arg1, void *arg2,
+				       void *opaque)
+{
+	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	u8 *msrpm = (u8 *)arg2;
+        u32 t0, t1;
+	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+	u32 param = svm->vmcb->control.exit_info_1 & 1;
+
+	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+		return 0;
+
+	switch(msr) {
+	case 0 ... 0x1fff:
+		t0 = (msr * 2) % 8;
+		t1 = msr / 8;
+		break;
+	case 0xc0000000 ... 0xc0001fff:
+		t0 = (8192 + msr - 0xc0000000) * 2;
+		t1 = (t0 / 8);
+		t0 %= 8;
+		break;
+	case 0xc0010000 ... 0xc0011fff:
+		t0 = (16384 + msr - 0xc0010000) * 2;
+		t1 = (t0 / 8);
+		t0 %= 8;
+		break;
+	default:
+		return 1;
+		break;
+	}
+	if (msrpm[t1] & ((1 << param) << t0))
+		return 1;
+
+	return 0;
+}
+
+static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
+{
+	bool k = kvm_override;
+
+	switch (svm->vmcb->control.exit_code) {
+	case SVM_EXIT_MSR:
+		return nested_svm_do(svm, svm->nested_vmcb,
+				     svm->nested_vmcb_msrpm, NULL,
+				     nested_svm_exit_handled_msr);
+	default: break;
+	}
+
+	return nested_svm_do(svm, svm->nested_vmcb, 0, &k,
+			     nested_svm_exit_handled_real);
+}
+
+static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
+				  void *arg2, void *opaque)
+{
+	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	struct vmcb *hsave = svm->hsave;
+	u64 nested_save[] = { nested_vmcb->save.cr0,
+			      nested_vmcb->save.cr3,
+			      nested_vmcb->save.cr4,
+			      nested_vmcb->save.efer,
+			      nested_vmcb->control.intercept_cr_read,
+			      nested_vmcb->control.intercept_cr_write,
+			      nested_vmcb->control.intercept_dr_read,
+			      nested_vmcb->control.intercept_dr_write,
+			      nested_vmcb->control.intercept_exceptions,
+			      nested_vmcb->control.intercept,
+			      nested_vmcb->control.msrpm_base_pa,
+			      nested_vmcb->control.iopm_base_pa,
+			      nested_vmcb->control.tsc_offset };
+
+	/* Give the current vmcb to the guest */
+	memcpy(nested_vmcb, svm->vmcb, sizeof(struct vmcb));
+	nested_vmcb->save.cr0 = nested_save[0];
+	if (!npt_enabled)
+		nested_vmcb->save.cr3 = nested_save[1];
+	nested_vmcb->save.cr4 = nested_save[2];
+	nested_vmcb->save.efer = nested_save[3];
+	nested_vmcb->control.intercept_cr_read = nested_save[4];
+	nested_vmcb->control.intercept_cr_write = nested_save[5];
+	nested_vmcb->control.intercept_dr_read = nested_save[6];
+	nested_vmcb->control.intercept_dr_write = nested_save[7];
+	nested_vmcb->control.intercept_exceptions = nested_save[8];
+	nested_vmcb->control.intercept = nested_save[9];
+	nested_vmcb->control.msrpm_base_pa = nested_save[10];
+	nested_vmcb->control.iopm_base_pa = nested_save[11];
+	nested_vmcb->control.tsc_offset = nested_save[12];
+
+	/* We always set V_INTR_MASKING and remember the old value in hflags */
+	if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
+		nested_vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK;
+
+	if ((nested_vmcb->control.int_ctl & V_IRQ_MASK) &&
+	    (nested_vmcb->control.int_vector)) {
+		nsvm_printk("WARNING: IRQ 0x%x still enabled on #VMEXIT\n",
+				nested_vmcb->control.int_vector);
+	}
+
+	/* Restore the original control entries */
+	svm->vmcb->control = hsave->control;
+
+	/* Kill any pending exceptions */
+	if (svm->vcpu.arch.exception.pending == true)
+		nsvm_printk("WARNING: Pending Exception\n");
+	svm->vcpu.arch.exception.pending = false;
+
+	/* Restore selected save entries */
+	svm->vmcb->save.es = hsave->save.es;
+	svm->vmcb->save.cs = hsave->save.cs;
+	svm->vmcb->save.ss = hsave->save.ss;
+	svm->vmcb->save.ds = hsave->save.ds;
+	svm->vmcb->save.gdtr = hsave->save.gdtr;
+	svm->vmcb->save.idtr = hsave->save.idtr;
+	svm->vmcb->save.rflags = hsave->save.rflags;
+	svm_set_efer(&svm->vcpu, hsave->save.efer);
+	svm_set_cr0(&svm->vcpu, hsave->save.cr0 | X86_CR0_PE);
+	svm_set_cr4(&svm->vcpu, hsave->save.cr4);
+	if (npt_enabled) {
+		svm->vmcb->save.cr3 = hsave->save.cr3;
+		svm->vcpu.arch.cr3 = hsave->save.cr3;
+	} else {
+		kvm_set_cr3(&svm->vcpu, hsave->save.cr3);
+	}
+	kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, hsave->save.rax);
+	kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, hsave->save.rsp);
+	kvm_register_write(&svm->vcpu, VCPU_REGS_RIP, hsave->save.rip);
+	svm->vmcb->save.dr7 = 0;
+	svm->vmcb->save.cpl = 0;
+	svm->vmcb->control.exit_int_info = 0;
+
+	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+	/* Exit nested SVM mode */
+	svm->nested_vmcb = 0;
+
+	return 0;
+}
+
+static int nested_svm_vmexit(struct vcpu_svm *svm)
+{
+	nsvm_printk("VMexit\n");
+	if (nested_svm_do(svm, svm->nested_vmcb, 0,
+			  NULL, nested_svm_vmexit_real))
+		return 1;
+
+	kvm_mmu_reset_context(&svm->vcpu);
+	kvm_mmu_load(&svm->vcpu);
+
+	return 0;
+}
 
 static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
 				  void *arg2, void *opaque)
@@ -1805,6 +2079,17 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
 		    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
 
+	if (is_nested(svm)) {
+		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
+			    exit_code, svm->vmcb->control.exit_info_1,
+			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
+		if (nested_svm_exit_handled(svm, true)) {
+			nested_svm_vmexit(svm);
+			nsvm_printk("-> #VMEXIT\n");
+			return 1;
+		}
+	}
+
 	if (npt_enabled) {
 		int mmu_reload = 0;
 		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -1892,6 +2177,8 @@ static void svm_set_irq(struct kvm_vcpu *vcpu, int irq)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	nested_svm_intr(svm);
+
 	svm_inject_irq(svm, irq);
 }
 
@@ -1937,6 +2224,9 @@ static void svm_intr_assist(struct kvm_vcpu *vcpu)
 	if (!kvm_cpu_has_interrupt(vcpu))
 		goto out;
 
+	if (nested_svm_intr(svm))
+		goto out;
+
 	if (!(svm->vcpu.arch.hflags & HF_GIF_MASK))
 		goto out;
 
@@ -1989,6 +2279,9 @@ static void do_interrupt_requests(struct kvm_vcpu *vcpu,
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct vmcb_control_area *control = &svm->vmcb->control;
 
+	if (nested_svm_intr(svm))
+		return;
+
 	svm->vcpu.arch.interrupt_window_open =
 		(!(control->int_state & SVM_INTERRUPT_SHADOW_MASK) &&
 		 (svm->vmcb->save.rflags & X86_EFLAGS_IF) &&
-- 
cgit v1.2.3


From eb6f302edff9da963e687bf6c15dcf88843b1c3b Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 25 Nov 2008 20:17:09 +0100
Subject: KVM: SVM: Allow read access to MSR_VM_VR

KVM tries to read the VM_CR MSR to find out if SVM was disabled by
the BIOS. So implement read support for this MSR to make nested
SVM running.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 4cb2920b152..df5b4119266 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1869,6 +1869,9 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	case MSR_VM_HSAVE_PA:
 		*data = svm->hsave_msr;
 		break;
+	case MSR_VM_CR:
+		*data = 0;
+		break;
 	default:
 		return kvm_get_msr_common(vcpu, ecx, data);
 	}
-- 
cgit v1.2.3


From 236de05553a7ef8f6940de8686ae9bf1272cd2cf Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:10 +0100
Subject: KVM: SVM: Allow setting the SVME bit

Normally setting the SVME bit in EFER is not allowed, as we did
not support SVM. Not since we do, we should also allow enabling
SVM mode.

v2 comes as last patch, so we don't enable half-ready code
v4 introduces a module option to enable SVM
v6 warns that nesting is enabled

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index df5b4119266..0fbbde54eca 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -69,6 +69,9 @@ static int npt = 1;
 
 module_param(npt, int, S_IRUGO);
 
+static int nested = 0;
+module_param(nested, int, S_IRUGO);
+
 static void kvm_reput_irq(struct vcpu_svm *svm);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
@@ -443,6 +446,11 @@ static __init int svm_hardware_setup(void)
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
+	if (nested) {
+		printk(KERN_INFO "kvm: Nested Virtualization enabled\n");
+		kvm_enable_efer_bits(EFER_SVME);
+	}
+
 	for_each_online_cpu(cpu) {
 		r = svm_cpu_init(cpu);
 		if (r)
-- 
cgit v1.2.3


From d80174745ba3938bc6abb8f95ed670ac0631a182 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Tue, 25 Nov 2008 20:17:11 +0100
Subject: KVM: SVM: Only allow setting of EFER_SVME when CPUID SVM is set

Userspace has to tell the kernel module somehow that nested SVM should be used.
The easiest way that doesn't break anything I could think of is to implement

if (cpuid & svm)
    allow write to efer
else
    deny write to efer

Old userspaces mask the SVM capability bit, so they don't break.
In order to find out that the SVM capability is set, I had to split the
kvm_emulate_cpuid into a finding and an emulating part.

(introduced in v6)

Acked-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 58 +++++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 42 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 99165a961f0..b5e9932e0f6 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -69,6 +69,8 @@ static u64 __read_mostly efer_reserved_bits = 0xfffffffffffffffeULL;
 
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries);
+struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
+					      u32 function, u32 index);
 
 struct kvm_x86_ops *kvm_x86_ops;
 EXPORT_SYMBOL_GPL(kvm_x86_ops);
@@ -173,6 +175,7 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 			   u32 error_code)
 {
 	++vcpu->stat.pf_guest;
+
 	if (vcpu->arch.exception.pending) {
 		if (vcpu->arch.exception.nr == PF_VECTOR) {
 			printk(KERN_DEBUG "kvm: inject_page_fault:"
@@ -442,6 +445,11 @@ unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_get_cr8);
 
+static inline u32 bit(int bitno)
+{
+	return 1 << (bitno & 31);
+}
+
 /*
  * List of msr numbers which we expose to userspace through KVM_GET_MSRS
  * and KVM_SET_MSRS, and KVM_GET_MSR_INDEX_LIST.
@@ -481,6 +489,17 @@ static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
 		return;
 	}
 
+	if (efer & EFER_SVME) {
+		struct kvm_cpuid_entry2 *feat;
+
+		feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
+		if (!feat || !(feat->ecx & bit(X86_FEATURE_SVM))) {
+			printk(KERN_DEBUG "set_efer: #GP, enable SVM w/o SVM\n");
+			kvm_inject_gp(vcpu, 0);
+			return;
+		}
+	}
+
 	kvm_x86_ops->set_efer(vcpu, efer);
 
 	efer &= ~EFER_LMA;
@@ -1181,11 +1200,6 @@ out:
 	return r;
 }
 
-static inline u32 bit(int bitno)
-{
-	return 1 << (bitno & 31);
-}
-
 static void do_cpuid_1_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			  u32 index)
 {
@@ -1228,7 +1242,8 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	const u32 kvm_supported_word3_x86_features =
 		bit(X86_FEATURE_XMM3) | bit(X86_FEATURE_CX16);
 	const u32 kvm_supported_word6_x86_features =
-		bit(X86_FEATURE_LAHF_LM) | bit(X86_FEATURE_CMP_LEGACY);
+		bit(X86_FEATURE_LAHF_LM) | bit(X86_FEATURE_CMP_LEGACY) |
+		bit(X86_FEATURE_SVM);
 
 	/* all func 2 cpuid_count() should be called on the same cpu */
 	get_cpu();
@@ -2832,20 +2847,15 @@ static int is_matching_cpuid_entry(struct kvm_cpuid_entry2 *e,
 	return 1;
 }
 
-void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
+struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
+					      u32 function, u32 index)
 {
 	int i;
-	u32 function, index;
-	struct kvm_cpuid_entry2 *e, *best;
+	struct kvm_cpuid_entry2 *best = NULL;
 
-	function = kvm_register_read(vcpu, VCPU_REGS_RAX);
-	index = kvm_register_read(vcpu, VCPU_REGS_RCX);
-	kvm_register_write(vcpu, VCPU_REGS_RAX, 0);
-	kvm_register_write(vcpu, VCPU_REGS_RBX, 0);
-	kvm_register_write(vcpu, VCPU_REGS_RCX, 0);
-	kvm_register_write(vcpu, VCPU_REGS_RDX, 0);
-	best = NULL;
 	for (i = 0; i < vcpu->arch.cpuid_nent; ++i) {
+		struct kvm_cpuid_entry2 *e;
+
 		e = &vcpu->arch.cpuid_entries[i];
 		if (is_matching_cpuid_entry(e, function, index)) {
 			if (e->flags & KVM_CPUID_FLAG_STATEFUL_FUNC)
@@ -2860,6 +2870,22 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 			if (!best || e->function > best->function)
 				best = e;
 	}
+
+	return best;
+}
+
+void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
+{
+	u32 function, index;
+	struct kvm_cpuid_entry2 *best;
+
+	function = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	index = kvm_register_read(vcpu, VCPU_REGS_RCX);
+	kvm_register_write(vcpu, VCPU_REGS_RAX, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RBX, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RCX, 0);
+	kvm_register_write(vcpu, VCPU_REGS_RDX, 0);
+	best = kvm_find_cpuid_entry(vcpu, function, index);
 	if (best) {
 		kvm_register_write(vcpu, VCPU_REGS_RAX, best->eax);
 		kvm_register_write(vcpu, VCPU_REGS_RBX, best->ebx);
-- 
cgit v1.2.3


From 8ab2d2e231062814bd89bba2d6d92563190aa2bb Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 15 Dec 2008 13:52:10 +0100
Subject: KVM: VMX: Support for injecting software exceptions

VMX differentiates between processor and software generated exceptions
when injecting them into the guest. Extend vmx_queue_exception
accordingly (and refactor related constants) so that we can use this
service reliably for the new guest debugging framework.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/vmx.h |  3 ++-
 arch/x86/kvm/vmx.c         | 35 ++++++++++++++++++++---------------
 2 files changed, 22 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index d0238e6151d..32159f034ef 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -270,8 +270,9 @@ enum vmcs_field {
 
 #define INTR_TYPE_EXT_INTR              (0 << 8) /* external interrupt */
 #define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
-#define INTR_TYPE_EXCEPTION             (3 << 8) /* processor exception */
+#define INTR_TYPE_HARD_EXCEPTION	(3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
+#define INTR_TYPE_SOFT_EXCEPTION	(6 << 8) /* software exception */
 
 /* GUEST_INTERRUPTIBILITY_INFO flags. */
 #define GUEST_INTR_STATE_STI		0x00000001
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 7611af57682..1d974c1eaa7 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -189,21 +189,21 @@ static inline int is_page_fault(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_EXCEPTION | PF_VECTOR | INTR_INFO_VALID_MASK);
+		(INTR_TYPE_HARD_EXCEPTION | PF_VECTOR | INTR_INFO_VALID_MASK);
 }
 
 static inline int is_no_device(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_EXCEPTION | NM_VECTOR | INTR_INFO_VALID_MASK);
+		(INTR_TYPE_HARD_EXCEPTION | NM_VECTOR | INTR_INFO_VALID_MASK);
 }
 
 static inline int is_invalid_opcode(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_EXCEPTION | UD_VECTOR | INTR_INFO_VALID_MASK);
+		(INTR_TYPE_HARD_EXCEPTION | UD_VECTOR | INTR_INFO_VALID_MASK);
 }
 
 static inline int is_external_interrupt(u32 intr_info)
@@ -747,29 +747,33 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 				bool has_error_code, u32 error_code)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	u32 intr_info = nr | INTR_INFO_VALID_MASK;
 
-	if (has_error_code)
+	if (has_error_code) {
 		vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
+		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
+	}
 
 	if (vcpu->arch.rmode.active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = nr;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
-		if (nr == BP_VECTOR)
+		if (nr == BP_VECTOR || nr == OF_VECTOR)
 			vmx->rmode.irq.rip++;
-		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
-			     nr | INTR_TYPE_SOFT_INTR
-			     | (has_error_code ? INTR_INFO_DELIVER_CODE_MASK : 0)
-			     | INTR_INFO_VALID_MASK);
+		intr_info |= INTR_TYPE_SOFT_INTR;
+		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
 		kvm_rip_write(vcpu, vmx->rmode.irq.rip - 1);
 		return;
 	}
 
-	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
-		     nr | INTR_TYPE_EXCEPTION
-		     | (has_error_code ? INTR_INFO_DELIVER_CODE_MASK : 0)
-		     | INTR_INFO_VALID_MASK);
+	if (nr == BP_VECTOR || nr == OF_VECTOR) {
+		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
+		intr_info |= INTR_TYPE_SOFT_EXCEPTION;
+	} else
+		intr_info |= INTR_TYPE_HARD_EXCEPTION;
+
+	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 }
 
 static bool vmx_exception_injected(struct kvm_vcpu *vcpu)
@@ -2650,7 +2654,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	if ((intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK)) ==
-	    (INTR_TYPE_EXCEPTION | 1)) {
+	    (INTR_TYPE_HARD_EXCEPTION | 1)) {
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
 		return 0;
 	}
@@ -3238,7 +3242,8 @@ static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 			vmx->vcpu.arch.nmi_injected = false;
 	}
 	kvm_clear_exception_queue(&vmx->vcpu);
-	if (idtv_info_valid && type == INTR_TYPE_EXCEPTION) {
+	if (idtv_info_valid && (type == INTR_TYPE_HARD_EXCEPTION ||
+				type == INTR_TYPE_SOFT_EXCEPTION)) {
 		if (idt_vectoring_info & VECTORING_INFO_DELIVER_CODE_MASK) {
 			error = vmcs_read32(IDT_VECTORING_ERROR_CODE);
 			kvm_queue_exception_e(&vmx->vcpu, vector, error);
-- 
cgit v1.2.3


From d0bfb940ecabf0b44fb1fd80d8d60594e569e5ec Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 15 Dec 2008 13:52:10 +0100
Subject: KVM: New guest debug interface

This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.

To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.

The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.

Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm.h     |  7 ++++
 arch/ia64/kvm/kvm-ia64.c        |  4 +-
 arch/powerpc/include/asm/kvm.h  |  7 ++++
 arch/powerpc/kvm/powerpc.c      |  4 +-
 arch/s390/include/asm/kvm.h     |  7 ++++
 arch/s390/kvm/kvm-s390.c        |  4 +-
 arch/x86/include/asm/kvm.h      | 18 ++++++++
 arch/x86/include/asm/kvm_host.h |  9 +---
 arch/x86/kvm/svm.c              | 50 +++++++++++++++++++++-
 arch/x86/kvm/vmx.c              | 93 ++++++++++++++++-------------------------
 arch/x86/kvm/x86.c              | 14 ++++---
 11 files changed, 138 insertions(+), 79 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index bfa86b6af7c..be3fdb89121 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -214,4 +214,11 @@ struct kvm_sregs {
 struct kvm_fpu {
 };
 
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
 #endif
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 28f982045f2..de47467a0e6 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1303,8 +1303,8 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 	return -EINVAL;
 }
 
-int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
-		struct kvm_debug_guest *dbg)
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg)
 {
 	return -EINVAL;
 }
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index f993e4198d5..755f1b1948c 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -52,4 +52,11 @@ struct kvm_fpu {
 	__u64 fpr[32];
 };
 
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
 #endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 5f81256287f..7c2ad4017d6 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -240,8 +240,8 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	kvmppc_core_vcpu_put(vcpu);
 }
 
-int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
-                                    struct kvm_debug_guest *dbg)
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg)
 {
 	int i;
 
diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
index e1f54654e3a..0b2f829f6d5 100644
--- a/arch/s390/include/asm/kvm.h
+++ b/arch/s390/include/asm/kvm.h
@@ -42,4 +42,11 @@ struct kvm_fpu {
 	__u64 fprs[16];
 };
 
+struct kvm_debug_exit_arch {
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
 #endif
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0d33893e1e8..cbfe91e1012 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -422,8 +422,8 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	return -EINVAL; /* not implemented yet */
 }
 
-int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
-				    struct kvm_debug_guest *dbg)
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg)
 {
 	return -EINVAL; /* not implemented yet */
 }
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 886c9402ec4..32eb96c7ca2 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -212,6 +212,24 @@ struct kvm_pit_channel_state {
 	__s64 count_load_time;
 };
 
+struct kvm_debug_exit_arch {
+	__u32 exception;
+	__u32 pad;
+	__u64 pc;
+	__u64 dr6;
+	__u64 dr7;
+};
+
+#define KVM_GUESTDBG_USE_SW_BP		0x00010000
+#define KVM_GUESTDBG_USE_HW_BP		0x00020000
+#define KVM_GUESTDBG_INJECT_DB		0x00040000
+#define KVM_GUESTDBG_INJECT_BP		0x00080000
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+	__u64 debugreg[8];
+};
+
 struct kvm_pit_state {
 	struct kvm_pit_channel_state channels[3];
 };
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 53779309514..c430cd580ee 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -135,12 +135,6 @@ enum {
 
 #define KVM_NR_MEM_OBJS 40
 
-struct kvm_guest_debug {
-	int enabled;
-	unsigned long bp[4];
-	int singlestep;
-};
-
 /*
  * We don't want allocation failures within the mmu code, so we preallocate
  * enough memory for a single page fault in a cache.
@@ -448,8 +442,7 @@ struct kvm_x86_ops {
 	void (*vcpu_put)(struct kvm_vcpu *vcpu);
 
 	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
-			       struct kvm_debug_guest *dbg);
-	void (*guest_debug_pre)(struct kvm_vcpu *vcpu);
+			       struct kvm_guest_debug *dbg);
 	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
 	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
 	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 0fbbde54eca..88d9062f454 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -968,9 +968,32 @@ static void svm_set_segment(struct kvm_vcpu *vcpu,
 
 }
 
-static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_debug_guest *dbg)
+static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 {
-	return -EOPNOTSUPP;
+	int old_debug = vcpu->guest_debug;
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	vcpu->guest_debug = dbg->control;
+
+	svm->vmcb->control.intercept_exceptions &=
+		~((1 << DB_VECTOR) | (1 << BP_VECTOR));
+	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
+		if (vcpu->guest_debug &
+		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
+			svm->vmcb->control.intercept_exceptions |=
+				1 << DB_VECTOR;
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+			svm->vmcb->control.intercept_exceptions |=
+				1 << BP_VECTOR;
+	} else
+		vcpu->guest_debug = 0;
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		svm->vmcb->save.rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
+	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
+		svm->vmcb->save.rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
+
+	return 0;
 }
 
 static int svm_get_irq(struct kvm_vcpu *vcpu)
@@ -1094,6 +1117,27 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
+static int db_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	if (!(svm->vcpu.guest_debug &
+	      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
+		kvm_queue_exception(&svm->vcpu, DB_VECTOR);
+		return 1;
+	}
+	kvm_run->exit_reason = KVM_EXIT_DEBUG;
+	kvm_run->debug.arch.pc = svm->vmcb->save.cs.base + svm->vmcb->save.rip;
+	kvm_run->debug.arch.exception = DB_VECTOR;
+	return 0;
+}
+
+static int bp_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	kvm_run->exit_reason = KVM_EXIT_DEBUG;
+	kvm_run->debug.arch.pc = svm->vmcb->save.cs.base + svm->vmcb->save.rip;
+	kvm_run->debug.arch.exception = BP_VECTOR;
+	return 0;
+}
+
 static int ud_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	int er;
@@ -2050,6 +2094,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_WRITE_DR3]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR5]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR7]			= emulate_on_interception,
+	[SVM_EXIT_EXCP_BASE + DB_VECTOR]	= db_interception,
+	[SVM_EXIT_EXCP_BASE + BP_VECTOR]	= bp_interception,
 	[SVM_EXIT_EXCP_BASE + UD_VECTOR]	= ud_interception,
 	[SVM_EXIT_EXCP_BASE + PF_VECTOR] 	= pf_interception,
 	[SVM_EXIT_EXCP_BASE + NM_VECTOR] 	= nm_interception,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 1d974c1eaa7..f55690ddb3a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -480,8 +480,13 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR);
 	if (!vcpu->fpu_active)
 		eb |= 1u << NM_VECTOR;
-	if (vcpu->guest_debug.enabled)
-		eb |= 1u << DB_VECTOR;
+	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
+		if (vcpu->guest_debug &
+		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
+			eb |= 1u << DB_VECTOR;
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+			eb |= 1u << BP_VECTOR;
+	}
 	if (vcpu->arch.rmode.active)
 		eb = ~0;
 	if (vm_need_ept())
@@ -1003,40 +1008,23 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 	}
 }
 
-static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_debug_guest *dbg)
+static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 {
-	unsigned long dr7 = 0x400;
-	int old_singlestep;
-
-	old_singlestep = vcpu->guest_debug.singlestep;
-
-	vcpu->guest_debug.enabled = dbg->enabled;
-	if (vcpu->guest_debug.enabled) {
-		int i;
-
-		dr7 |= 0x200;  /* exact */
-		for (i = 0; i < 4; ++i) {
-			if (!dbg->breakpoints[i].enabled)
-				continue;
-			vcpu->guest_debug.bp[i] = dbg->breakpoints[i].address;
-			dr7 |= 2 << (i*2);    /* global enable */
-			dr7 |= 0 << (i*4+16); /* execution breakpoint */
-		}
-
-		vcpu->guest_debug.singlestep = dbg->singlestep;
-	} else
-		vcpu->guest_debug.singlestep = 0;
+	int old_debug = vcpu->guest_debug;
+	unsigned long flags;
 
-	if (old_singlestep && !vcpu->guest_debug.singlestep) {
-		unsigned long flags;
+	vcpu->guest_debug = dbg->control;
+	if (!(vcpu->guest_debug & KVM_GUESTDBG_ENABLE))
+		vcpu->guest_debug = 0;
 
-		flags = vmcs_readl(GUEST_RFLAGS);
+	flags = vmcs_readl(GUEST_RFLAGS);
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		flags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
+	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
 		flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-		vmcs_writel(GUEST_RFLAGS, flags);
-	}
+	vmcs_writel(GUEST_RFLAGS, flags);
 
 	update_exception_bitmap(vcpu);
-	vmcs_writel(GUEST_DR7, dr7);
 
 	return 0;
 }
@@ -2540,24 +2528,6 @@ static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr)
 	return 0;
 }
 
-static void kvm_guest_debug_pre(struct kvm_vcpu *vcpu)
-{
-	struct kvm_guest_debug *dbg = &vcpu->guest_debug;
-
-	set_debugreg(dbg->bp[0], 0);
-	set_debugreg(dbg->bp[1], 1);
-	set_debugreg(dbg->bp[2], 2);
-	set_debugreg(dbg->bp[3], 3);
-
-	if (dbg->singlestep) {
-		unsigned long flags;
-
-		flags = vmcs_readl(GUEST_RFLAGS);
-		flags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
-		vmcs_writel(GUEST_RFLAGS, flags);
-	}
-}
-
 static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 				  int vec, u32 err_code)
 {
@@ -2574,9 +2544,17 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 	 *        the required debugging infrastructure rework.
 	 */
 	switch (vec) {
-	case DE_VECTOR:
 	case DB_VECTOR:
+		if (vcpu->guest_debug &
+		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
+			return 0;
+		kvm_queue_exception(vcpu, vec);
+		return 1;
 	case BP_VECTOR:
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+			return 0;
+		/* fall through */
+	case DE_VECTOR:
 	case OF_VECTOR:
 	case BR_VECTOR:
 	case UD_VECTOR:
@@ -2593,7 +2571,7 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 intr_info, error_code;
+	u32 intr_info, ex_no, error_code;
 	unsigned long cr2, rip;
 	u32 vect_info;
 	enum emulation_result er;
@@ -2653,14 +2631,16 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		return 1;
 	}
 
-	if ((intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK)) ==
-	    (INTR_TYPE_HARD_EXCEPTION | 1)) {
+	ex_no = intr_info & INTR_INFO_VECTOR_MASK;
+	if (ex_no == DB_VECTOR || ex_no == BP_VECTOR) {
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
-		return 0;
+		kvm_run->debug.arch.pc = vmcs_readl(GUEST_CS_BASE) + rip;
+		kvm_run->debug.arch.exception = ex_no;
+	} else {
+		kvm_run->exit_reason = KVM_EXIT_EXCEPTION;
+		kvm_run->ex.exception = ex_no;
+		kvm_run->ex.error_code = error_code;
 	}
-	kvm_run->exit_reason = KVM_EXIT_EXCEPTION;
-	kvm_run->ex.exception = intr_info & INTR_INFO_VECTOR_MASK;
-	kvm_run->ex.error_code = error_code;
 	return 0;
 }
 
@@ -3600,7 +3580,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.vcpu_put = vmx_vcpu_put,
 
 	.set_guest_debug = set_guest_debug,
-	.guest_debug_pre = kvm_guest_debug_pre,
 	.get_msr = vmx_get_msr,
 	.set_msr = vmx_set_msr,
 	.get_segment_base = vmx_get_segment_base,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index b5e9932e0f6..e990d164b56 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3005,9 +3005,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		goto out;
 	}
 
-	if (vcpu->guest_debug.enabled)
-		kvm_x86_ops->guest_debug_pre(vcpu);
-
 	vcpu->guest_mode = 1;
 	/*
 	 * Make sure that guest_mode assignment won't happen after
@@ -3218,7 +3215,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	/*
 	 * Don't leak debug flags in case they were set for guest debugging
 	 */
-	if (vcpu->guest_debug.enabled && vcpu->guest_debug.singlestep)
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		regs->rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
 
 	vcpu_put(vcpu);
@@ -3837,8 +3834,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
-				    struct kvm_debug_guest *dbg)
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg)
 {
 	int r;
 
@@ -3846,6 +3843,11 @@ int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
 
 	r = kvm_x86_ops->set_guest_debug(vcpu, dbg);
 
+	if (dbg->control & KVM_GUESTDBG_INJECT_DB)
+		kvm_queue_exception(vcpu, DB_VECTOR);
+	else if (dbg->control & KVM_GUESTDBG_INJECT_BP)
+		kvm_queue_exception(vcpu, BP_VECTOR);
+
 	vcpu_put(vcpu);
 
 	return r;
-- 
cgit v1.2.3


From 55934c0bd3bb232a9cf902820dd63ad18ed65e49 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 15 Dec 2008 13:52:10 +0100
Subject: KVM: VMX: Allow single-stepping when uninterruptible

When single-stepping over STI and MOV SS, we must clear the
corresponding interruptibility bits in the guest state. Otherwise
vmentry fails as it then expects bit 14 (BS) in pending debug exceptions
being set, but that's not correct for the guest debugging case.

Note that clearing those bits is safe as we check for interruptibility
based on the original state and do not inject interrupts or NMIs if
guest interruptibility was blocked.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f55690ddb3a..c776868ffe4 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2478,6 +2478,11 @@ static void do_interrupt_requests(struct kvm_vcpu *vcpu,
 {
 	vmx_update_window_states(vcpu);
 
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
+				GUEST_INTR_STATE_STI |
+				GUEST_INTR_STATE_MOV_SS);
+
 	if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
 		if (vcpu->arch.interrupt.pending) {
 			enable_nmi_window(vcpu);
@@ -3244,6 +3249,11 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 
 	vmx_update_window_states(vcpu);
 
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
+				GUEST_INTR_STATE_STI |
+				GUEST_INTR_STATE_MOV_SS);
+
 	if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
 		if (vcpu->arch.interrupt.pending) {
 			enable_nmi_window(vcpu);
-- 
cgit v1.2.3


From 42dbaa5a057736bf8b5c22aa42dbe975bf1080e5 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 15 Dec 2008 13:52:10 +0100
Subject: KVM: x86: Virtualize debug registers

So far KVM only had basic x86 debug register support, once introduced to
realize guest debugging that way. The guest itself was not able to use
those registers.

This patch now adds (almost) full support for guest self-debugging via
hardware registers. It refactors the code, moving generic parts out of
SVM (VMX was already cleaned up by the KVM_SET_GUEST_DEBUG patches), and
it ensures that the registers are properly switched between host and
guest.

This patch also prepares debug register usage by the host. The latter
will (once wired-up by the following patch) allow for hardware
breakpoints/watchpoints in guest code. If this is enabled, the guest
will only see faked debug registers without functionality, but with
content reflecting the guest's modifications.

Tested on Intel only, but SVM /should/ work as well, but who knows...

Known limitations: Trapping on tss switch won't work - most probably on
Intel.

Credits also go to Joerg Roedel - I used his once posted debugging
series as platform for this patch.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  22 ++++++++
 arch/x86/include/asm/vmx.h      |   2 +-
 arch/x86/kvm/kvm_svm.h          |   6 ---
 arch/x86/kvm/svm.c              | 116 +++++++++++++++-------------------------
 arch/x86/kvm/vmx.c              | 114 +++++++++++++++++++++++++++++++++------
 arch/x86/kvm/x86.c              |  29 ++++++++++
 6 files changed, 193 insertions(+), 96 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c430cd580ee..0a4dab25a91 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -135,6 +135,19 @@ enum {
 
 #define KVM_NR_MEM_OBJS 40
 
+#define KVM_NR_DB_REGS	4
+
+#define DR6_BD		(1 << 13)
+#define DR6_BS		(1 << 14)
+#define DR6_FIXED_1	0xffff0ff0
+#define DR6_VOLATILE	0x0000e00f
+
+#define DR7_BP_EN_MASK	0x000000ff
+#define DR7_GE		(1 << 9)
+#define DR7_GD		(1 << 13)
+#define DR7_FIXED_1	0x00000400
+#define DR7_VOLATILE	0xffff23ff
+
 /*
  * We don't want allocation failures within the mmu code, so we preallocate
  * enough memory for a single page fault in a cache.
@@ -334,6 +347,15 @@ struct kvm_vcpu_arch {
 
 	struct mtrr_state_type mtrr_state;
 	u32 pat;
+
+	int switch_db_regs;
+	unsigned long host_db[KVM_NR_DB_REGS];
+	unsigned long host_dr6;
+	unsigned long host_dr7;
+	unsigned long db[KVM_NR_DB_REGS];
+	unsigned long dr6;
+	unsigned long dr7;
+	unsigned long eff_db[KVM_NR_DB_REGS];
 };
 
 struct kvm_mem_alias {
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 32159f034ef..498f944010b 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -312,7 +312,7 @@ enum vmcs_field {
 #define DEBUG_REG_ACCESS_TYPE           0x10    /* 4, direction of access */
 #define TYPE_MOV_TO_DR                  (0 << 4)
 #define TYPE_MOV_FROM_DR                (1 << 4)
-#define DEBUG_REG_ACCESS_REG            0xf00   /* 11:8, general purpose reg. */
+#define DEBUG_REG_ACCESS_REG(eq)        (((eq) >> 8) & 0xf) /* 11:8, general purpose reg. */
 
 
 /* segment AR */
diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
index 91673413d8f..ed66e4c078d 100644
--- a/arch/x86/kvm/kvm_svm.h
+++ b/arch/x86/kvm/kvm_svm.h
@@ -18,7 +18,6 @@ static const u32 host_save_user_msrs[] = {
 };
 
 #define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
-#define NUM_DB_REGS 4
 
 struct kvm_vcpu;
 
@@ -29,16 +28,11 @@ struct vcpu_svm {
 	struct svm_cpu_data *svm_data;
 	uint64_t asid_generation;
 
-	unsigned long db_regs[NUM_DB_REGS];
-
 	u64 next_rip;
 
 	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
 	u64 host_gs_base;
 	unsigned long host_cr2;
-	unsigned long host_db_regs[NUM_DB_REGS];
-	unsigned long host_dr6;
-	unsigned long host_dr7;
 
 	u32 *msrpm;
 	struct vmcb *hsave;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 88d9062f454..815f50e425a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -38,9 +38,6 @@ MODULE_LICENSE("GPL");
 #define IOPM_ALLOC_ORDER 2
 #define MSRPM_ALLOC_ORDER 1
 
-#define DR7_GD_MASK (1 << 13)
-#define DR6_BD_MASK (1 << 13)
-
 #define SEG_TYPE_LDT 2
 #define SEG_TYPE_BUSY_TSS16 3
 
@@ -181,32 +178,6 @@ static inline void kvm_write_cr2(unsigned long val)
 	asm volatile ("mov %0, %%cr2" :: "r" (val));
 }
 
-static inline unsigned long read_dr6(void)
-{
-	unsigned long dr6;
-
-	asm volatile ("mov %%dr6, %0" : "=r" (dr6));
-	return dr6;
-}
-
-static inline void write_dr6(unsigned long val)
-{
-	asm volatile ("mov %0, %%dr6" :: "r" (val));
-}
-
-static inline unsigned long read_dr7(void)
-{
-	unsigned long dr7;
-
-	asm volatile ("mov %%dr7, %0" : "=r" (dr7));
-	return dr7;
-}
-
-static inline void write_dr7(unsigned long val)
-{
-	asm volatile ("mov %0, %%dr7" :: "r" (val));
-}
-
 static inline void force_new_asid(struct kvm_vcpu *vcpu)
 {
 	to_svm(vcpu)->asid_generation--;
@@ -695,7 +666,6 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	clear_page(svm->vmcb);
 	svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
 	svm->asid_generation = 0;
-	memset(svm->db_regs, 0, sizeof(svm->db_regs));
 	init_vmcb(svm);
 
 	fx_init(&svm->vcpu);
@@ -1035,7 +1005,29 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 
 static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 {
-	unsigned long val = to_svm(vcpu)->db_regs[dr];
+	struct vcpu_svm *svm = to_svm(vcpu);
+	unsigned long val;
+
+	switch (dr) {
+	case 0 ... 3:
+		val = vcpu->arch.db[dr];
+		break;
+	case 6:
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
+			val = vcpu->arch.dr6;
+		else
+			val = svm->vmcb->save.dr6;
+		break;
+	case 7:
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
+			val = vcpu->arch.dr7;
+		else
+			val = svm->vmcb->save.dr7;
+		break;
+	default:
+		val = 0;
+	}
+
 	KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	return val;
 }
@@ -1045,33 +1037,40 @@ static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	*exception = 0;
+	KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)value, handler);
 
-	if (svm->vmcb->save.dr7 & DR7_GD_MASK) {
-		svm->vmcb->save.dr7 &= ~DR7_GD_MASK;
-		svm->vmcb->save.dr6 |= DR6_BD_MASK;
-		*exception = DB_VECTOR;
-		return;
-	}
+	*exception = 0;
 
 	switch (dr) {
 	case 0 ... 3:
-		svm->db_regs[dr] = value;
+		vcpu->arch.db[dr] = value;
+		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
+			vcpu->arch.eff_db[dr] = value;
 		return;
 	case 4 ... 5:
-		if (vcpu->arch.cr4 & X86_CR4_DE) {
+		if (vcpu->arch.cr4 & X86_CR4_DE)
 			*exception = UD_VECTOR;
+		return;
+	case 6:
+		if (value & 0xffffffff00000000ULL) {
+			*exception = GP_VECTOR;
 			return;
 		}
-	case 7: {
-		if (value & ~((1ULL << 32) - 1)) {
+		vcpu->arch.dr6 = (value & DR6_VOLATILE) | DR6_FIXED_1;
+		return;
+	case 7:
+		if (value & 0xffffffff00000000ULL) {
 			*exception = GP_VECTOR;
 			return;
 		}
-		svm->vmcb->save.dr7 = value;
+		vcpu->arch.dr7 = (value & DR7_VOLATILE) | DR7_FIXED_1;
+		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
+			svm->vmcb->save.dr7 = vcpu->arch.dr7;
+			vcpu->arch.switch_db_regs = (value & DR7_BP_EN_MASK);
+		}
 		return;
-	}
 	default:
+		/* FIXME: Possible case? */
 		printk(KERN_DEBUG "%s: unexpected dr %u\n",
 		       __func__, dr);
 		*exception = UD_VECTOR;
@@ -2365,22 +2364,6 @@ static int svm_set_tss_addr(struct kvm *kvm, unsigned int addr)
 	return 0;
 }
 
-static void save_db_regs(unsigned long *db_regs)
-{
-	asm volatile ("mov %%dr0, %0" : "=r"(db_regs[0]));
-	asm volatile ("mov %%dr1, %0" : "=r"(db_regs[1]));
-	asm volatile ("mov %%dr2, %0" : "=r"(db_regs[2]));
-	asm volatile ("mov %%dr3, %0" : "=r"(db_regs[3]));
-}
-
-static void load_db_regs(unsigned long *db_regs)
-{
-	asm volatile ("mov %0, %%dr0" : : "r"(db_regs[0]));
-	asm volatile ("mov %0, %%dr1" : : "r"(db_regs[1]));
-	asm volatile ("mov %0, %%dr2" : : "r"(db_regs[2]));
-	asm volatile ("mov %0, %%dr3" : : "r"(db_regs[3]));
-}
-
 static void svm_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	force_new_asid(vcpu);
@@ -2439,20 +2422,12 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	gs_selector = kvm_read_gs();
 	ldt_selector = kvm_read_ldt();
 	svm->host_cr2 = kvm_read_cr2();
-	svm->host_dr6 = read_dr6();
-	svm->host_dr7 = read_dr7();
 	if (!is_nested(svm))
 		svm->vmcb->save.cr2 = vcpu->arch.cr2;
 	/* required for live migration with NPT */
 	if (npt_enabled)
 		svm->vmcb->save.cr3 = vcpu->arch.cr3;
 
-	if (svm->vmcb->save.dr7 & 0xff) {
-		write_dr7(0);
-		save_db_regs(svm->host_db_regs);
-		load_db_regs(svm->db_regs);
-	}
-
 	clgi();
 
 	local_irq_enable();
@@ -2528,16 +2503,11 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 		);
 
-	if ((svm->vmcb->save.dr7 & 0xff))
-		load_db_regs(svm->host_db_regs);
-
 	vcpu->arch.cr2 = svm->vmcb->save.cr2;
 	vcpu->arch.regs[VCPU_REGS_RAX] = svm->vmcb->save.rax;
 	vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
 	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
-	write_dr6(svm->host_dr6);
-	write_dr7(svm->host_dr7);
 	kvm_write_cr2(svm->host_cr2);
 
 	kvm_load_fs(fs_selector);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c776868ffe4..0989776ee7b 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2311,7 +2311,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		kvm_rip_write(vcpu, 0);
 	kvm_register_write(vcpu, VCPU_REGS_RSP, 0);
 
-	/* todo: dr0 = dr1 = dr2 = dr3 = 0; dr6 = 0xffff0ff0 */
 	vmcs_writel(GUEST_DR7, 0x400);
 
 	vmcs_writel(GUEST_GDTR_BASE, 0);
@@ -2577,7 +2576,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 intr_info, ex_no, error_code;
-	unsigned long cr2, rip;
+	unsigned long cr2, rip, dr6;
 	u32 vect_info;
 	enum emulation_result er;
 
@@ -2637,14 +2636,28 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	ex_no = intr_info & INTR_INFO_VECTOR_MASK;
-	if (ex_no == DB_VECTOR || ex_no == BP_VECTOR) {
+	switch (ex_no) {
+	case DB_VECTOR:
+		dr6 = vmcs_readl(EXIT_QUALIFICATION);
+		if (!(vcpu->guest_debug &
+		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
+			vcpu->arch.dr6 = dr6 | DR6_FIXED_1;
+			kvm_queue_exception(vcpu, DB_VECTOR);
+			return 1;
+		}
+		kvm_run->debug.arch.dr6 = dr6 | DR6_FIXED_1;
+		kvm_run->debug.arch.dr7 = vmcs_readl(GUEST_DR7);
+		/* fall through */
+	case BP_VECTOR:
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
 		kvm_run->debug.arch.pc = vmcs_readl(GUEST_CS_BASE) + rip;
 		kvm_run->debug.arch.exception = ex_no;
-	} else {
+		break;
+	default:
 		kvm_run->exit_reason = KVM_EXIT_EXCEPTION;
 		kvm_run->ex.exception = ex_no;
 		kvm_run->ex.error_code = error_code;
+		break;
 	}
 	return 0;
 }
@@ -2784,21 +2797,44 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	unsigned long val;
 	int dr, reg;
 
-	/*
-	 * FIXME: this code assumes the host is debugging the guest.
-	 *        need to deal with guest debugging itself too.
-	 */
+	dr = vmcs_readl(GUEST_DR7);
+	if (dr & DR7_GD) {
+		/*
+		 * As the vm-exit takes precedence over the debug trap, we
+		 * need to emulate the latter, either for the host or the
+		 * guest debugging itself.
+		 */
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
+			kvm_run->debug.arch.dr6 = vcpu->arch.dr6;
+			kvm_run->debug.arch.dr7 = dr;
+			kvm_run->debug.arch.pc =
+				vmcs_readl(GUEST_CS_BASE) +
+				vmcs_readl(GUEST_RIP);
+			kvm_run->debug.arch.exception = DB_VECTOR;
+			kvm_run->exit_reason = KVM_EXIT_DEBUG;
+			return 0;
+		} else {
+			vcpu->arch.dr7 &= ~DR7_GD;
+			vcpu->arch.dr6 |= DR6_BD;
+			vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
+			kvm_queue_exception(vcpu, DB_VECTOR);
+			return 1;
+		}
+	}
+
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
-	dr = exit_qualification & 7;
-	reg = (exit_qualification >> 8) & 15;
-	if (exit_qualification & 16) {
-		/* mov from dr */
+	dr = exit_qualification & DEBUG_REG_ACCESS_NUM;
+	reg = DEBUG_REG_ACCESS_REG(exit_qualification);
+	if (exit_qualification & TYPE_MOV_FROM_DR) {
 		switch (dr) {
+		case 0 ... 3:
+			val = vcpu->arch.db[dr];
+			break;
 		case 6:
-			val = 0xffff0ff0;
+			val = vcpu->arch.dr6;
 			break;
 		case 7:
-			val = 0x400;
+			val = vcpu->arch.dr7;
 			break;
 		default:
 			val = 0;
@@ -2806,7 +2842,38 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		kvm_register_write(vcpu, reg, val);
 		KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	} else {
-		/* mov to dr */
+		val = vcpu->arch.regs[reg];
+		switch (dr) {
+		case 0 ... 3:
+			vcpu->arch.db[dr] = val;
+			if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
+				vcpu->arch.eff_db[dr] = val;
+			break;
+		case 4 ... 5:
+			if (vcpu->arch.cr4 & X86_CR4_DE)
+				kvm_queue_exception(vcpu, UD_VECTOR);
+			break;
+		case 6:
+			if (val & 0xffffffff00000000ULL) {
+				kvm_queue_exception(vcpu, GP_VECTOR);
+				break;
+			}
+			vcpu->arch.dr6 = (val & DR6_VOLATILE) | DR6_FIXED_1;
+			break;
+		case 7:
+			if (val & 0xffffffff00000000ULL) {
+				kvm_queue_exception(vcpu, GP_VECTOR);
+				break;
+			}
+			vcpu->arch.dr7 = (val & DR7_VOLATILE) | DR7_FIXED_1;
+			if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
+				vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
+				vcpu->arch.switch_db_regs =
+					(val & DR7_BP_EN_MASK);
+			}
+			break;
+		}
+		KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)val, handler);
 	}
 	skip_emulated_instruction(vcpu);
 	return 1;
@@ -2957,7 +3024,18 @@ static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 	tss_selector = exit_qualification;
 
-	return kvm_task_switch(vcpu, tss_selector, reason);
+	if (!kvm_task_switch(vcpu, tss_selector, reason))
+		return 0;
+
+	/* clear all local breakpoint enable flags */
+	vmcs_writel(GUEST_DR7, vmcs_readl(GUEST_DR7) & ~55);
+
+	/*
+	 * TODO: What about debug traps on tss switch?
+	 *       Are we supposed to inject them and update dr6?
+	 */
+
+	return 1;
 }
 
 static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
@@ -3342,6 +3420,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	 */
 	vmcs_writel(HOST_CR0, read_cr0());
 
+	set_debugreg(vcpu->arch.dr6, 6);
+
 	asm(
 		/* Store host registers */
 		"push %%"R"dx; push %%"R"bp;"
@@ -3436,6 +3516,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
 	vcpu->arch.regs_dirty = 0;
 
+	get_debugreg(vcpu->arch.dr6, 6);
+
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 	if (vmx->rmode.irq.pending)
 		fixup_rmode_irq(vmx);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e990d164b56..300bc4d42ab 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3025,10 +3025,34 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	kvm_guest_enter();
 
+	get_debugreg(vcpu->arch.host_dr6, 6);
+	get_debugreg(vcpu->arch.host_dr7, 7);
+	if (unlikely(vcpu->arch.switch_db_regs)) {
+		get_debugreg(vcpu->arch.host_db[0], 0);
+		get_debugreg(vcpu->arch.host_db[1], 1);
+		get_debugreg(vcpu->arch.host_db[2], 2);
+		get_debugreg(vcpu->arch.host_db[3], 3);
+
+		set_debugreg(0, 7);
+		set_debugreg(vcpu->arch.eff_db[0], 0);
+		set_debugreg(vcpu->arch.eff_db[1], 1);
+		set_debugreg(vcpu->arch.eff_db[2], 2);
+		set_debugreg(vcpu->arch.eff_db[3], 3);
+	}
 
 	KVMTRACE_0D(VMENTRY, vcpu, entryexit);
 	kvm_x86_ops->run(vcpu, kvm_run);
 
+	if (unlikely(vcpu->arch.switch_db_regs)) {
+		set_debugreg(0, 7);
+		set_debugreg(vcpu->arch.host_db[0], 0);
+		set_debugreg(vcpu->arch.host_db[1], 1);
+		set_debugreg(vcpu->arch.host_db[2], 2);
+		set_debugreg(vcpu->arch.host_db[3], 3);
+	}
+	set_debugreg(vcpu->arch.host_dr6, 6);
+	set_debugreg(vcpu->arch.host_dr7, 7);
+
 	vcpu->guest_mode = 0;
 	local_irq_enable();
 
@@ -4035,6 +4059,11 @@ int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.nmi_pending = false;
 	vcpu->arch.nmi_injected = false;
 
+	vcpu->arch.switch_db_regs = 0;
+	memset(vcpu->arch.db, 0, sizeof(vcpu->arch.db));
+	vcpu->arch.dr6 = DR6_FIXED_1;
+	vcpu->arch.dr7 = DR7_FIXED_1;
+
 	return kvm_x86_ops->vcpu_reset(vcpu);
 }
 
-- 
cgit v1.2.3


From ae675ef01cd86014acf8da5dee87876b71122495 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 15 Dec 2008 13:52:10 +0100
Subject: KVM: x86: Wire-up hardware breakpoints for guest debugging

Add the remaining bits to make use of debug registers also for guest
debugging, thus enabling the use of hardware breakpoints and
watchpoints.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c |  5 +++++
 arch/x86/kvm/vmx.c |  5 +++++
 arch/x86/kvm/x86.c | 14 +++++++++++++-
 3 files changed, 23 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 815f50e425a..b3a7a314d55 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -958,6 +958,11 @@ static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 	} else
 		vcpu->guest_debug = 0;
 
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
+		svm->vmcb->save.dr7 = dbg->arch.debugreg[7];
+	else
+		svm->vmcb->save.dr7 = vcpu->arch.dr7;
+
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		svm->vmcb->save.rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
 	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 0989776ee7b..cee81c9a665 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1017,6 +1017,11 @@ static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 	if (!(vcpu->guest_debug & KVM_GUESTDBG_ENABLE))
 		vcpu->guest_debug = 0;
 
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
+		vmcs_writel(GUEST_DR7, dbg->arch.debugreg[7]);
+	else
+		vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
+
 	flags = vmcs_readl(GUEST_RFLAGS);
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		flags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 300bc4d42ab..2477e87b2f8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3861,10 +3861,22 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg)
 {
-	int r;
+	int i, r;
 
 	vcpu_load(vcpu);
 
+	if ((dbg->control & (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP)) ==
+	    (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP)) {
+		for (i = 0; i < KVM_NR_DB_REGS; ++i)
+			vcpu->arch.eff_db[i] = dbg->arch.debugreg[i];
+		vcpu->arch.switch_db_regs =
+			(dbg->arch.debugreg[7] & DR7_BP_EN_MASK);
+	} else {
+		for (i = 0; i < KVM_NR_DB_REGS; i++)
+			vcpu->arch.eff_db[i] = vcpu->arch.db[i];
+		vcpu->arch.switch_db_regs = (vcpu->arch.dr7 & DR7_BP_EN_MASK);
+	}
+
 	r = kvm_x86_ops->set_guest_debug(vcpu, dbg);
 
 	if (dbg->control & KVM_GUESTDBG_INJECT_DB)
-- 
cgit v1.2.3


From e9a999fe1feaddb71bffbacbbd68e0da8ca8b50b Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Thu, 18 Dec 2008 12:17:51 +0100
Subject: KVM: ia64: stack get/restore patch

Implement KVM_IA64_VCPU_[GS]ET_STACK ioctl calls. This is required
for live migrations.

Patch is based on previous implementation that was part of old
GET/SET_REGS ioctl calls.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm.h      |  7 +++
 arch/ia64/include/asm/kvm_host.h |  6 ++-
 arch/ia64/kvm/kvm-ia64.c         | 92 ++++++++++++++++++++++++++++++++++++++--
 3 files changed, 101 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index be3fdb89121..b5145784233 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -214,6 +214,13 @@ struct kvm_sregs {
 struct kvm_fpu {
 };
 
+#define KVM_IA64_VCPU_STACK_SHIFT	16
+#define KVM_IA64_VCPU_STACK_SIZE	(1UL << KVM_IA64_VCPU_STACK_SHIFT)
+
+struct kvm_ia64_vcpu_stack {
+	unsigned char stack[KVM_IA64_VCPU_STACK_SIZE];
+};
+
 struct kvm_debug_exit_arch {
 };
 
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 34866366165..7da0c096322 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -112,7 +112,11 @@
 #define VCPU_STRUCT_SHIFT	16
 #define VCPU_STRUCT_SIZE	(__IA64_UL_CONST(1) << VCPU_STRUCT_SHIFT)
 
-#define KVM_STK_OFFSET		VCPU_STRUCT_SIZE
+/*
+ * This must match KVM_IA64_VCPU_STACK_{SHIFT,SIZE} arch/ia64/include/asm/kvm.h
+ */
+#define KVM_STK_SHIFT		16
+#define KVM_STK_OFFSET		(__IA64_UL_CONST(1)<< KVM_STK_SHIFT)
 
 #define KVM_VM_STRUCT_SHIFT	19
 #define KVM_VM_STRUCT_SIZE	(__IA64_UL_CONST(1) << KVM_VM_STRUCT_SHIFT)
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index de47467a0e6..1477f91617a 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1421,6 +1421,23 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
+int kvm_arch_vcpu_ioctl_get_stack(struct kvm_vcpu *vcpu,
+				  struct kvm_ia64_vcpu_stack *stack)
+{
+	memcpy(stack, vcpu, sizeof(struct kvm_ia64_vcpu_stack));
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_stack(struct kvm_vcpu *vcpu,
+				  struct kvm_ia64_vcpu_stack *stack)
+{
+	memcpy(vcpu + 1, &stack->stack[0] + sizeof(struct kvm_vcpu),
+	       sizeof(struct kvm_ia64_vcpu_stack) - sizeof(struct kvm_vcpu));
+
+	vcpu->arch.exit_data = ((struct kvm_vcpu *)stack)->arch.exit_data;
+	return 0;
+}
+
 void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
 
@@ -1430,9 +1447,78 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 
 
 long kvm_arch_vcpu_ioctl(struct file *filp,
-		unsigned int ioctl, unsigned long arg)
+			 unsigned int ioctl, unsigned long arg)
 {
-	return -EINVAL;
+	struct kvm_vcpu *vcpu = filp->private_data;
+	void __user *argp = (void __user *)arg;
+	struct kvm_ia64_vcpu_stack *stack = NULL;
+	long r;
+
+	switch (ioctl) {
+	case KVM_IA64_VCPU_GET_STACK: {
+		struct kvm_ia64_vcpu_stack __user *user_stack;
+	        void __user *first_p = argp;
+
+		r = -EFAULT;
+		if (copy_from_user(&user_stack, first_p, sizeof(void *)))
+			goto out;
+
+		if (!access_ok(VERIFY_WRITE, user_stack,
+			       sizeof(struct kvm_ia64_vcpu_stack))) {
+			printk(KERN_INFO "KVM_IA64_VCPU_GET_STACK: "
+			       "Illegal user destination address for stack\n");
+			goto out;
+		}
+		stack = kzalloc(sizeof(struct kvm_ia64_vcpu_stack), GFP_KERNEL);
+		if (!stack) {
+			r = -ENOMEM;
+			goto out;
+		}
+
+		r = kvm_arch_vcpu_ioctl_get_stack(vcpu, stack);
+		if (r)
+			goto out;
+
+		if (copy_to_user(user_stack, stack,
+				 sizeof(struct kvm_ia64_vcpu_stack)))
+			goto out;
+
+		break;
+	}
+	case KVM_IA64_VCPU_SET_STACK: {
+		struct kvm_ia64_vcpu_stack __user *user_stack;
+	        void __user *first_p = argp;
+
+		r = -EFAULT;
+		if (copy_from_user(&user_stack, first_p, sizeof(void *)))
+			goto out;
+
+		if (!access_ok(VERIFY_READ, user_stack,
+			    sizeof(struct kvm_ia64_vcpu_stack))) {
+			printk(KERN_INFO "KVM_IA64_VCPU_SET_STACK: "
+			       "Illegal user address for stack\n");
+			goto out;
+		}
+		stack = kmalloc(sizeof(struct kvm_ia64_vcpu_stack), GFP_KERNEL);
+		if (!stack) {
+			r = -ENOMEM;
+			goto out;
+		}
+		if (copy_from_user(stack, user_stack,
+				   sizeof(struct kvm_ia64_vcpu_stack)))
+			goto out;
+
+		r = kvm_arch_vcpu_ioctl_set_stack(vcpu, stack);
+		break;
+	}
+
+	default:
+		r = -EINVAL;
+	}
+
+out:
+	kfree(stack);
+	return r;
 }
 
 int kvm_arch_set_memory_region(struct kvm *kvm,
@@ -1472,7 +1558,7 @@ void kvm_arch_flush_shadow(struct kvm *kvm)
 }
 
 long kvm_arch_dev_ioctl(struct file *filp,
-		unsigned int ioctl, unsigned long arg)
+			unsigned int ioctl, unsigned long arg)
 {
 	return -EINVAL;
 }
-- 
cgit v1.2.3


From 989c0f0ed56468a4aa48711cef5acf122a40d1dd Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Thu, 18 Dec 2008 12:33:18 +0100
Subject: KVM: Remove old kvm_guest_debug structs

Remove the remaining arch fragments of the old guest debug interface
that now break non-x86 builds.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_host.h    | 2 --
 arch/powerpc/include/asm/kvm_host.h | 6 ------
 arch/s390/include/asm/kvm_host.h    | 3 ---
 3 files changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 7da0c096322..46f8b0eb568 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -239,8 +239,6 @@ struct kvm_vm_data {
 
 struct kvm;
 struct kvm_vcpu;
-struct kvm_guest_debug{
-};
 
 struct kvm_mmio_req {
 	uint64_t addr;          /*  physical address		*/
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index c1e436fe773..a22600537a8 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -200,10 +200,4 @@ struct kvm_vcpu_arch {
 	unsigned long pending_exceptions;
 };
 
-struct kvm_guest_debug {
-	int enabled;
-	unsigned long bp[4];
-	int singlestep;
-};
-
 #endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 3c55e4107dc..c6e674f5fca 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -21,9 +21,6 @@
 /* memory slots that does not exposed to userspace */
 #define KVM_PRIVATE_MEM_SLOTS 4
 
-struct kvm_guest_debug {
-};
-
 struct sca_entry {
 	atomic_t scn;
 	__u64	reserved;
-- 
cgit v1.2.3


From 22ccb14203d59a8bcf6f3fea76b3594d710569fa Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Thu, 18 Dec 2008 10:23:58 +0800
Subject: KVM: ia64: Code cleanup

Remove some unnecessary blank lines to accord with Kernel's coding style.
Also remove vcpu_get_itir_on_fault due to no reference to it.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/process.c | 15 ---------------
 arch/ia64/kvm/vcpu.c    | 39 ++-------------------------------------
 arch/ia64/kvm/vtlb.c    |  5 -----
 3 files changed, 2 insertions(+), 57 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index 230eae482f3..f9c9504144f 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -167,7 +167,6 @@ static u64 vcpu_get_itir_on_fault(struct kvm_vcpu *vcpu, u64 ifa)
 	return (rr1.val);
 }
 
-
 /*
  * Set vIFA & vITIR & vIHA, when vPSR.ic =1
  * Parameter:
@@ -222,8 +221,6 @@ void itlb_fault(struct kvm_vcpu *vcpu, u64 vadr)
 	inject_guest_interruption(vcpu, IA64_INST_TLB_VECTOR);
 }
 
-
-
 /*
  * Data Nested TLB Fault
  *  @ Data Nested TLB Vector
@@ -245,7 +242,6 @@ void alt_dtlb(struct kvm_vcpu *vcpu, u64 vadr)
 	inject_guest_interruption(vcpu, IA64_ALT_DATA_TLB_VECTOR);
 }
 
-
 /*
  * Data TLB Fault
  *  @ Data TLB vector
@@ -265,8 +261,6 @@ static void _vhpt_fault(struct kvm_vcpu *vcpu, u64 vadr)
 	/* If vPSR.ic, IFA, ITIR, IHA*/
 	set_ifa_itir_iha(vcpu, vadr, 1, 1, 1);
 	inject_guest_interruption(vcpu, IA64_VHPT_TRANS_VECTOR);
-
-
 }
 
 /*
@@ -279,7 +273,6 @@ void ivhpt_fault(struct kvm_vcpu *vcpu, u64 vadr)
 	_vhpt_fault(vcpu, vadr);
 }
 
-
 /*
  * VHPT Data Fault
  *  @ VHPT Translation vector
@@ -290,8 +283,6 @@ void dvhpt_fault(struct kvm_vcpu *vcpu, u64 vadr)
 	_vhpt_fault(vcpu, vadr);
 }
 
-
-
 /*
  * Deal with:
  *  General Exception vector
@@ -301,7 +292,6 @@ void _general_exception(struct kvm_vcpu *vcpu)
 	inject_guest_interruption(vcpu, IA64_GENEX_VECTOR);
 }
 
-
 /*
  * Illegal Operation Fault
  *  @ General Exception Vector
@@ -419,19 +409,16 @@ static void __page_not_present(struct kvm_vcpu *vcpu, u64 vadr)
 	inject_guest_interruption(vcpu, IA64_PAGE_NOT_PRESENT_VECTOR);
 }
 
-
 void data_page_not_present(struct kvm_vcpu *vcpu, u64 vadr)
 {
 	__page_not_present(vcpu, vadr);
 }
 
-
 void inst_page_not_present(struct kvm_vcpu *vcpu, u64 vadr)
 {
 	__page_not_present(vcpu, vadr);
 }
 
-
 /* Deal with
  *  Data access rights vector
  */
@@ -703,7 +690,6 @@ void vhpi_detection(struct kvm_vcpu *vcpu)
 	}
 }
 
-
 void leave_hypervisor_tail(void)
 {
 	struct kvm_vcpu *v = current_vcpu;
@@ -737,7 +723,6 @@ void leave_hypervisor_tail(void)
 	}
 }
 
-
 static inline void handle_lds(struct kvm_pt_regs *regs)
 {
 	regs->cr_ipsr |= IA64_PSR_ED;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index ecd526b5532..4d8be4c252f 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -112,7 +112,6 @@ void switch_to_physical_rid(struct kvm_vcpu *vcpu)
 	return;
 }
 
-
 void switch_to_virtual_rid(struct kvm_vcpu *vcpu)
 {
 	unsigned long psr;
@@ -166,8 +165,6 @@ void switch_mm_mode(struct kvm_vcpu *vcpu, struct ia64_psr old_psr,
 	return;
 }
 
-
-
 /*
  * In physical mode, insert tc/tr for region 0 and 4 uses
  * RID[0] and RID[4] which is for physical mode emulation.
@@ -269,7 +266,6 @@ static inline unsigned long fph_index(struct kvm_pt_regs *regs,
 	return rotate_reg(96, rrb_fr, (regnum - IA64_FIRST_ROTATING_FR));
 }
 
-
 /*
  * The inverse of the above: given bspstore and the number of
  * registers, calculate ar.bsp.
@@ -1039,8 +1035,6 @@ u64 vcpu_tak(struct kvm_vcpu *vcpu, u64 vadr)
 	return key;
 }
 
-
-
 void kvm_thash(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long thash, vadr;
@@ -1050,7 +1044,6 @@ void kvm_thash(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_gr(vcpu, inst.M46.r1, thash, 0);
 }
 
-
 void kvm_ttag(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long tag, vadr;
@@ -1131,7 +1124,6 @@ int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, u64 *padr)
 	return IA64_NO_FAULT;
 }
 
-
 int kvm_tpa(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long r1, r3;
@@ -1154,7 +1146,6 @@ void kvm_tak(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_gr(vcpu, inst.M46.r1, r1, 0);
 }
 
-
 /************************************
  * Insert/Purge translation register/cache
  ************************************/
@@ -1385,7 +1376,6 @@ void kvm_mov_to_ar_reg(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_itc(vcpu, r2);
 }
 
-
 void kvm_mov_from_ar_reg(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long r1;
@@ -1393,8 +1383,9 @@ void kvm_mov_from_ar_reg(struct kvm_vcpu *vcpu, INST64 inst)
 	r1 = vcpu_get_itc(vcpu);
 	vcpu_set_gr(vcpu, inst.M31.r1, r1, 0);
 }
+
 /**************************************************************************
-  struct kvm_vcpu*protection key register access routines
+  struct kvm_vcpu protection key register access routines
  **************************************************************************/
 
 unsigned long vcpu_get_pkr(struct kvm_vcpu *vcpu, unsigned long reg)
@@ -1407,20 +1398,6 @@ void vcpu_set_pkr(struct kvm_vcpu *vcpu, unsigned long reg, unsigned long val)
 	ia64_set_pkr(reg, val);
 }
 
-
-unsigned long vcpu_get_itir_on_fault(struct kvm_vcpu *vcpu, unsigned long ifa)
-{
-	union ia64_rr rr, rr1;
-
-	rr.val = vcpu_get_rr(vcpu, ifa);
-	rr1.val = 0;
-	rr1.ps = rr.ps;
-	rr1.rid = rr.rid;
-	return (rr1.val);
-}
-
-
-
 /********************************
  * Moves to privileged registers
  ********************************/
@@ -1464,8 +1441,6 @@ unsigned long vcpu_set_rr(struct kvm_vcpu *vcpu, unsigned long reg,
 	return (IA64_NO_FAULT);
 }
 
-
-
 void kvm_mov_to_rr(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long r3, r2;
@@ -1510,8 +1485,6 @@ void kvm_mov_to_pkr(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_pkr(vcpu, r3, r2);
 }
 
-
-
 void kvm_mov_from_rr(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long r3, r1;
@@ -1557,7 +1530,6 @@ void kvm_mov_from_pmc(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_gr(vcpu, inst.M43.r1, r1, 0);
 }
 
-
 unsigned long vcpu_get_cpuid(struct kvm_vcpu *vcpu, unsigned long reg)
 {
 	/* FIXME: This could get called as a result of a rsvd-reg fault */
@@ -1609,7 +1581,6 @@ unsigned long kvm_mov_to_cr(struct kvm_vcpu *vcpu, INST64 inst)
 	return 0;
 }
 
-
 unsigned long kvm_mov_from_cr(struct kvm_vcpu *vcpu, INST64 inst)
 {
 	unsigned long tgt = inst.M33.r1;
@@ -1633,8 +1604,6 @@ unsigned long kvm_mov_from_cr(struct kvm_vcpu *vcpu, INST64 inst)
 	return 0;
 }
 
-
-
 void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val)
 {
 
@@ -1776,9 +1745,6 @@ void vcpu_bsw1(struct kvm_vcpu *vcpu)
 	}
 }
 
-
-
-
 void vcpu_rfi(struct kvm_vcpu *vcpu)
 {
 	unsigned long ifs, psr;
@@ -1796,7 +1762,6 @@ void vcpu_rfi(struct kvm_vcpu *vcpu)
 	regs->cr_iip = VCPU(vcpu, iip);
 }
 
-
 /*
    VPSR can't keep track of below bits of guest PSR
    This function gets guest PSR
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 6b6307a3bd5..ac94867f826 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -509,7 +509,6 @@ void thash_purge_all(struct kvm_vcpu *v)
 	local_flush_tlb_all();
 }
 
-
 /*
  * Lookup the hash table and its collision chain to find an entry
  * covering this address rid:va or the entry.
@@ -517,7 +516,6 @@ void thash_purge_all(struct kvm_vcpu *v)
  * INPUT:
  *  in: TLB format for both VHPT & TLB.
  */
-
 struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
 {
 	struct thash_data  *cch;
@@ -547,7 +545,6 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
 	return NULL;
 }
 
-
 /*
  * Initialize internal control data before service.
  */
@@ -589,7 +586,6 @@ u64 kvm_gpa_to_mpa(u64 gpa)
 	return (pte >> PAGE_SHIFT << PAGE_SHIFT) | (gpa & ~PAGE_MASK);
 }
 
-
 /*
  * Fetch guest bundle code.
  * INPUT:
@@ -631,7 +627,6 @@ int fetch_code(struct kvm_vcpu *vcpu, u64 gip, IA64_BUNDLE *pbundle)
 	return IA64_NO_FAULT;
 }
 
-
 void kvm_init_vhpt(struct kvm_vcpu *v)
 {
 	v->arch.vhpt.num = VHPT_NUM_ENTRIES;
-- 
cgit v1.2.3


From a770f6f28b1a9287189f3dc8333eb694d9a2f0ab Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 21 Dec 2008 19:20:09 +0200
Subject: KVM: MMU: Inherit a shadow page's guest level count from vcpu setup

Instead of "calculating" it on every shadow page allocation, set it once
when switching modes, and copy it when allocating pages.

This doesn't buy us much, but sets up the stage for inheriting more
information related to the mmu setup.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/mmu.c              | 17 +++++++++++------
 2 files changed, 12 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 0a4dab25a91..28f875f28f5 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -244,6 +244,7 @@ struct kvm_mmu {
 	hpa_t root_hpa;
 	int root_level;
 	int shadow_root_level;
+	union kvm_mmu_page_role base_role;
 
 	u64 *pae_root;
 };
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 2d4477c7147..f15023c11fe 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1204,8 +1204,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	struct kvm_mmu_page *sp;
 	struct hlist_node *node, *tmp;
 
-	role.word = 0;
-	role.glevels = vcpu->arch.mmu.root_level;
+	role = vcpu->arch.mmu.base_role;
 	role.level = level;
 	role.metaphysical = metaphysical;
 	role.access = access;
@@ -2251,17 +2250,23 @@ static int init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 
 static int init_kvm_softmmu(struct kvm_vcpu *vcpu)
 {
+	int r;
+
 	ASSERT(vcpu);
 	ASSERT(!VALID_PAGE(vcpu->arch.mmu.root_hpa));
 
 	if (!is_paging(vcpu))
-		return nonpaging_init_context(vcpu);
+		r = nonpaging_init_context(vcpu);
 	else if (is_long_mode(vcpu))
-		return paging64_init_context(vcpu);
+		r = paging64_init_context(vcpu);
 	else if (is_pae(vcpu))
-		return paging32E_init_context(vcpu);
+		r = paging32E_init_context(vcpu);
 	else
-		return paging32_init_context(vcpu);
+		r = paging32_init_context(vcpu);
+
+	vcpu->arch.mmu.base_role.glevels = vcpu->arch.mmu.root_level;
+
+	return r;
 }
 
 static int init_kvm_mmu(struct kvm_vcpu *vcpu)
-- 
cgit v1.2.3


From 2f0b3d60b2c43aef7cd10169c425c052169c622a Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 21 Dec 2008 19:27:36 +0200
Subject: KVM: MMU: Segregate mmu pages created with different cr4.pge settings

Don't allow a vcpu with cr4.pge cleared to use a shadow page created with
cr4.pge set; this might cause a cr3 switch not to sync ptes that have the
global bit set (the global bit has no effect if !cr4.pge).

This can only occur on smp with different cr4.pge settings for different
vcpus (since a cr4 change will resync the shadow ptes), but there's no
cost to being correct here.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 1 +
 arch/x86/kvm/x86.c              | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 28f875f28f5..c2a01d0513f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -183,6 +183,7 @@ union kvm_mmu_page_role {
 		unsigned metaphysical:1;
 		unsigned access:3;
 		unsigned invalid:1;
+		unsigned cr4_pge:1;
 	};
 };
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2477e87b2f8..873602b5edf 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -364,6 +364,7 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	}
 	kvm_x86_ops->set_cr4(vcpu, cr4);
 	vcpu->arch.cr4 = cr4;
+	vcpu->arch.mmu.base_role.cr4_pge = !!(cr4 & X86_CR4_PGE);
 	kvm_mmu_sync_global(vcpu);
 	kvm_mmu_reset_context(vcpu);
 }
-- 
cgit v1.2.3


From e2078318042569682d0496cfd7bd962a766e82b1 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 21 Dec 2008 19:36:59 +0200
Subject: KVM: MMU: Initialize a shadow page's global attribute from cr4.pge

If cr4.pge is cleared, we ought to treat any ptes in the page as non-global.
This allows us to remove the check from set_spte().

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f15023c11fe..5f03ec324e3 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -797,7 +797,6 @@ static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
 	ASSERT(is_empty_shadow_page(sp->spt));
 	bitmap_zero(sp->slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS);
 	sp->multimapped = 0;
-	sp->global = 1;
 	sp->parent_pte = parent_pte;
 	--vcpu->kvm->arch.n_free_mmu_pages;
 	return sp;
@@ -1241,6 +1240,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
 	sp->gfn = gfn;
 	sp->role = role;
+	sp->global = role.cr4_pge;
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!metaphysical) {
 		if (rmap_write_protect(vcpu->kvm, gfn))
@@ -1668,8 +1668,6 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 	u64 mt_mask = shadow_mt_mask;
 	struct kvm_mmu_page *sp = page_header(__pa(shadow_pte));
 
-	if (!(vcpu->arch.cr4 & X86_CR4_PGE))
-		global = 0;
 	if (!global && sp->global) {
 		sp->global = 0;
 		if (sp->unsync) {
-- 
cgit v1.2.3


From 2b3d2a206037b1471de6a6dc51427af034cfdb47 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 23 Dec 2008 19:46:01 +0200
Subject: KVM: Fix vmload and friends misinterpreted as lidt

The AMD SVM instruction family all overload the 0f 01 /3 opcode, further
multiplexing on the three r/m bits.  But the code decided that anything that
isn't a vmmcall must be an lidt (which shares the 0f 01 /3 opcode, for the
case that mod = 3).

Fix by aborting emulation if this isn't a vmmcall.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index d174db7a337..54fb09889a8 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1908,11 +1908,16 @@ twobyte_insn:
 			c->dst.type = OP_NONE;
 			break;
 		case 3: /* lidt/vmmcall */
-			if (c->modrm_mod == 3 && c->modrm_rm == 1) {
-				rc = kvm_fix_hypercall(ctxt->vcpu);
-				if (rc)
-					goto done;
-				kvm_emulate_hypercall(ctxt->vcpu);
+			if (c->modrm_mod == 3) {
+				switch (c->modrm_rm) {
+				case 1:
+					rc = kvm_fix_hypercall(ctxt->vcpu);
+					if (rc)
+						goto done;
+					break;
+				default:
+					goto cannot_emulate;
+				}
 			} else {
 				rc = read_descriptor(ctxt, ops, c->src.ptr,
 						     &size, &address,
-- 
cgit v1.2.3


From 2d11123a77e54d5cea262c958e8498f4a08bce3d Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 25 Dec 2008 14:39:47 +0200
Subject: KVM: MMU: Add for_each_shadow_entry(), a simpler alternative to
 walk_shadow()

Using a for_each loop style removes the need to write callback and nasty
casts.

Implement the walk_shadow() using the for_each_shadow_entry().

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 69 ++++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 49 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5f03ec324e3..c669f2af1d1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -150,6 +150,20 @@ struct kvm_shadow_walk {
 		     u64 addr, u64 *spte, int level);
 };
 
+struct kvm_shadow_walk_iterator {
+	u64 addr;
+	hpa_t shadow_addr;
+	int level;
+	u64 *sptep;
+	unsigned index;
+};
+
+#define for_each_shadow_entry(_vcpu, _addr, _walker)    \
+	for (shadow_walk_init(&(_walker), _vcpu, _addr);	\
+	     shadow_walk_okay(&(_walker));			\
+	     shadow_walk_next(&(_walker)))
+
+
 struct kvm_unsync_walk {
 	int (*entry) (struct kvm_mmu_page *sp, struct kvm_unsync_walk *walk);
 };
@@ -1254,33 +1268,48 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	return sp;
 }
 
+static void shadow_walk_init(struct kvm_shadow_walk_iterator *iterator,
+			     struct kvm_vcpu *vcpu, u64 addr)
+{
+	iterator->addr = addr;
+	iterator->shadow_addr = vcpu->arch.mmu.root_hpa;
+	iterator->level = vcpu->arch.mmu.shadow_root_level;
+	if (iterator->level == PT32E_ROOT_LEVEL) {
+		iterator->shadow_addr
+			= vcpu->arch.mmu.pae_root[(addr >> 30) & 3];
+		iterator->shadow_addr &= PT64_BASE_ADDR_MASK;
+		--iterator->level;
+		if (!iterator->shadow_addr)
+			iterator->level = 0;
+	}
+}
+
+static bool shadow_walk_okay(struct kvm_shadow_walk_iterator *iterator)
+{
+	if (iterator->level < PT_PAGE_TABLE_LEVEL)
+		return false;
+	iterator->index = SHADOW_PT_INDEX(iterator->addr, iterator->level);
+	iterator->sptep	= ((u64 *)__va(iterator->shadow_addr)) + iterator->index;
+	return true;
+}
+
+static void shadow_walk_next(struct kvm_shadow_walk_iterator *iterator)
+{
+	iterator->shadow_addr = *iterator->sptep & PT64_BASE_ADDR_MASK;
+	--iterator->level;
+}
+
 static int walk_shadow(struct kvm_shadow_walk *walker,
 		       struct kvm_vcpu *vcpu, u64 addr)
 {
-	hpa_t shadow_addr;
-	int level;
+	struct kvm_shadow_walk_iterator iterator;
 	int r;
-	u64 *sptep;
-	unsigned index;
-
-	shadow_addr = vcpu->arch.mmu.root_hpa;
-	level = vcpu->arch.mmu.shadow_root_level;
-	if (level == PT32E_ROOT_LEVEL) {
-		shadow_addr = vcpu->arch.mmu.pae_root[(addr >> 30) & 3];
-		shadow_addr &= PT64_BASE_ADDR_MASK;
-		if (!shadow_addr)
-			return 1;
-		--level;
-	}
 
-	while (level >= PT_PAGE_TABLE_LEVEL) {
-		index = SHADOW_PT_INDEX(addr, level);
-		sptep = ((u64 *)__va(shadow_addr)) + index;
-		r = walker->entry(walker, vcpu, addr, sptep, level);
+	for_each_shadow_entry(vcpu, addr, iterator) {
+		r = walker->entry(walker, vcpu, addr,
+				  iterator.sptep, iterator.level);
 		if (r)
 			return r;
-		shadow_addr = *sptep & PT64_BASE_ADDR_MASK;
-		--level;
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From 9f652d21c3f887075a33abae85bf53fec64e67b1 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 25 Dec 2008 14:54:25 +0200
Subject: KVM: MMU: Use for_each_shadow_entry() in __direct_map()

Eliminating a callback and a useless structure.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 83 +++++++++++++++++++-----------------------------------
 1 file changed, 29 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index c669f2af1d1..a25e1adb5cf 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1846,67 +1846,42 @@ static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
 {
 }
 
-struct direct_shadow_walk {
-	struct kvm_shadow_walk walker;
-	pfn_t pfn;
-	int write;
-	int largepage;
-	int pt_write;
-};
-
-static int direct_map_entry(struct kvm_shadow_walk *_walk,
-			    struct kvm_vcpu *vcpu,
-			    u64 addr, u64 *sptep, int level)
+static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
+			int largepage, gfn_t gfn, pfn_t pfn)
 {
-	struct direct_shadow_walk *walk =
-		container_of(_walk, struct direct_shadow_walk, walker);
+	struct kvm_shadow_walk_iterator iterator;
 	struct kvm_mmu_page *sp;
+	int pt_write = 0;
 	gfn_t pseudo_gfn;
-	gfn_t gfn = addr >> PAGE_SHIFT;
-
-	if (level == PT_PAGE_TABLE_LEVEL
-	    || (walk->largepage && level == PT_DIRECTORY_LEVEL)) {
-		mmu_set_spte(vcpu, sptep, ACC_ALL, ACC_ALL,
-			     0, walk->write, 1, &walk->pt_write,
-			     walk->largepage, 0, gfn, walk->pfn, false);
-		++vcpu->stat.pf_fixed;
-		return 1;
-	}
 
-	if (*sptep == shadow_trap_nonpresent_pte) {
-		pseudo_gfn = (addr & PT64_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
-		sp = kvm_mmu_get_page(vcpu, pseudo_gfn, (gva_t)addr, level - 1,
-				      1, ACC_ALL, sptep);
-		if (!sp) {
-			pgprintk("nonpaging_map: ENOMEM\n");
-			kvm_release_pfn_clean(walk->pfn);
-			return -ENOMEM;
+	for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
+		if (iterator.level == PT_PAGE_TABLE_LEVEL
+		    || (largepage && iterator.level == PT_DIRECTORY_LEVEL)) {
+			mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
+				     0, write, 1, &pt_write,
+				     largepage, 0, gfn, pfn, false);
+			++vcpu->stat.pf_fixed;
+			break;
 		}
 
-		set_shadow_pte(sptep,
-			       __pa(sp->spt)
-			       | PT_PRESENT_MASK | PT_WRITABLE_MASK
-			       | shadow_user_mask | shadow_x_mask);
-	}
-	return 0;
-}
+		if (*iterator.sptep == shadow_trap_nonpresent_pte) {
+			pseudo_gfn = (iterator.addr & PT64_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
+			sp = kvm_mmu_get_page(vcpu, pseudo_gfn, iterator.addr,
+					      iterator.level - 1,
+					      1, ACC_ALL, iterator.sptep);
+			if (!sp) {
+				pgprintk("nonpaging_map: ENOMEM\n");
+				kvm_release_pfn_clean(pfn);
+				return -ENOMEM;
+			}
 
-static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
-			int largepage, gfn_t gfn, pfn_t pfn)
-{
-	int r;
-	struct direct_shadow_walk walker = {
-		.walker = { .entry = direct_map_entry, },
-		.pfn = pfn,
-		.largepage = largepage,
-		.write = write,
-		.pt_write = 0,
-	};
-
-	r = walk_shadow(&walker.walker, vcpu, gfn << PAGE_SHIFT);
-	if (r < 0)
-		return r;
-	return walker.pt_write;
+			set_shadow_pte(iterator.sptep,
+				       __pa(sp->spt)
+				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
+				       | shadow_user_mask | shadow_x_mask);
+		}
+	}
+	return pt_write;
 }
 
 static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
-- 
cgit v1.2.3


From e7a04c99b54ad9acb98a56113ec3163bc1039e13 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 25 Dec 2008 15:10:50 +0200
Subject: KVM: MMU: Replace walk_shadow() by for_each_shadow_entry() in fetch()

Effectively reverting to the pre walk_shadow() version -- but now
with the reusable for_each().

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/paging_tmpl.h | 128 ++++++++++++++++++++-------------------------
 1 file changed, 58 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 9fd78b6e17a..69c7e3311b8 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -283,91 +283,79 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 /*
  * Fetch a shadow pte for a specific level in the paging hierarchy.
  */
-static int FNAME(shadow_walk_entry)(struct kvm_shadow_walk *_sw,
-				    struct kvm_vcpu *vcpu, u64 addr,
-				    u64 *sptep, int level)
+static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
+			 struct guest_walker *gw,
+			 int user_fault, int write_fault, int largepage,
+			 int *ptwrite, pfn_t pfn)
 {
-	struct shadow_walker *sw =
-		container_of(_sw, struct shadow_walker, walker);
-	struct guest_walker *gw = sw->guest_walker;
 	unsigned access = gw->pt_access;
 	struct kvm_mmu_page *shadow_page;
-	u64 spte;
+	u64 spte, *sptep;
 	int metaphysical;
 	gfn_t table_gfn;
 	int r;
+	int level;
 	pt_element_t curr_pte;
+	struct kvm_shadow_walk_iterator iterator;
 
-	if (level == PT_PAGE_TABLE_LEVEL
-	    || (sw->largepage && level == PT_DIRECTORY_LEVEL)) {
-		mmu_set_spte(vcpu, sptep, access, gw->pte_access & access,
-			     sw->user_fault, sw->write_fault,
-			     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
-			     sw->ptwrite, sw->largepage,
-			     gw->ptes[gw->level-1] & PT_GLOBAL_MASK,
-			     gw->gfn, sw->pfn, false);
-		sw->sptep = sptep;
-		return 1;
-	}
-
-	if (is_shadow_present_pte(*sptep) && !is_large_pte(*sptep))
-		return 0;
-
-	if (is_large_pte(*sptep)) {
-		set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
-		kvm_flush_remote_tlbs(vcpu->kvm);
-		rmap_remove(vcpu->kvm, sptep);
-	}
+	if (!is_present_pte(gw->ptes[gw->level - 1]))
+		return NULL;
 
-	if (level == PT_DIRECTORY_LEVEL && gw->level == PT_DIRECTORY_LEVEL) {
-		metaphysical = 1;
-		if (!is_dirty_pte(gw->ptes[level - 1]))
-			access &= ~ACC_WRITE_MASK;
-		table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
-	} else {
-		metaphysical = 0;
-		table_gfn = gw->table_gfn[level - 2];
-	}
-	shadow_page = kvm_mmu_get_page(vcpu, table_gfn, (gva_t)addr, level-1,
-				       metaphysical, access, sptep);
-	if (!metaphysical) {
-		r = kvm_read_guest_atomic(vcpu->kvm, gw->pte_gpa[level - 2],
-					  &curr_pte, sizeof(curr_pte));
-		if (r || curr_pte != gw->ptes[level - 2]) {
-			kvm_mmu_put_page(shadow_page, sptep);
-			kvm_release_pfn_clean(sw->pfn);
-			sw->sptep = NULL;
-			return 1;
+	for_each_shadow_entry(vcpu, addr, iterator) {
+		level = iterator.level;
+		sptep = iterator.sptep;
+		if (level == PT_PAGE_TABLE_LEVEL
+		    || (largepage && level == PT_DIRECTORY_LEVEL)) {
+			mmu_set_spte(vcpu, sptep, access,
+				     gw->pte_access & access,
+				     user_fault, write_fault,
+				     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
+				     ptwrite, largepage,
+				     gw->ptes[gw->level-1] & PT_GLOBAL_MASK,
+				     gw->gfn, pfn, false);
+			break;
 		}
-	}
 
-	spte = __pa(shadow_page->spt) | PT_PRESENT_MASK | PT_ACCESSED_MASK
-		| PT_WRITABLE_MASK | PT_USER_MASK;
-	*sptep = spte;
-	return 0;
-}
+		if (is_shadow_present_pte(*sptep) && !is_large_pte(*sptep))
+			continue;
 
-static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
-			 struct guest_walker *guest_walker,
-			 int user_fault, int write_fault, int largepage,
-			 int *ptwrite, pfn_t pfn)
-{
-	struct shadow_walker walker = {
-		.walker = { .entry = FNAME(shadow_walk_entry), },
-		.guest_walker = guest_walker,
-		.user_fault = user_fault,
-		.write_fault = write_fault,
-		.largepage = largepage,
-		.ptwrite = ptwrite,
-		.pfn = pfn,
-	};
+		if (is_large_pte(*sptep)) {
+			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
+			rmap_remove(vcpu->kvm, sptep);
+		}
 
-	if (!is_present_pte(guest_walker->ptes[guest_walker->level - 1]))
-		return NULL;
+		if (level == PT_DIRECTORY_LEVEL
+		    && gw->level == PT_DIRECTORY_LEVEL) {
+			metaphysical = 1;
+			if (!is_dirty_pte(gw->ptes[level - 1]))
+				access &= ~ACC_WRITE_MASK;
+			table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
+		} else {
+			metaphysical = 0;
+			table_gfn = gw->table_gfn[level - 2];
+		}
+		shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
+					       metaphysical, access, sptep);
+		if (!metaphysical) {
+			r = kvm_read_guest_atomic(vcpu->kvm,
+						  gw->pte_gpa[level - 2],
+						  &curr_pte, sizeof(curr_pte));
+			if (r || curr_pte != gw->ptes[level - 2]) {
+				kvm_mmu_put_page(shadow_page, sptep);
+				kvm_release_pfn_clean(pfn);
+				sptep = NULL;
+				break;
+			}
+		}
 
-	walk_shadow(&walker.walker, vcpu, addr);
+		spte = __pa(shadow_page->spt)
+			| PT_PRESENT_MASK | PT_ACCESSED_MASK
+			| PT_WRITABLE_MASK | PT_USER_MASK;
+		*sptep = spte;
+	}
 
-	return walker.sptep;
+	return sptep;
 }
 
 /*
-- 
cgit v1.2.3


From a461930bc3cece021f8f89a80dcc1d0691a92b52 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 25 Dec 2008 15:19:00 +0200
Subject: KVM: MMU: Replace walk_shadow() by for_each_shadow_entry() in
 invlpg()

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/paging_tmpl.h | 81 ++++++++++++++++++----------------------------
 1 file changed, 32 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 69c7e3311b8..46b68f941f6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -25,7 +25,6 @@
 #if PTTYPE == 64
 	#define pt_element_t u64
 	#define guest_walker guest_walker64
-	#define shadow_walker shadow_walker64
 	#define FNAME(name) paging##64_##name
 	#define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
 	#define PT_DIR_BASE_ADDR_MASK PT64_DIR_BASE_ADDR_MASK
@@ -42,7 +41,6 @@
 #elif PTTYPE == 32
 	#define pt_element_t u32
 	#define guest_walker guest_walker32
-	#define shadow_walker shadow_walker32
 	#define FNAME(name) paging##32_##name
 	#define PT_BASE_ADDR_MASK PT32_BASE_ADDR_MASK
 	#define PT_DIR_BASE_ADDR_MASK PT32_DIR_BASE_ADDR_MASK
@@ -73,18 +71,6 @@ struct guest_walker {
 	u32 error_code;
 };
 
-struct shadow_walker {
-	struct kvm_shadow_walk walker;
-	struct guest_walker *guest_walker;
-	int user_fault;
-	int write_fault;
-	int largepage;
-	int *ptwrite;
-	pfn_t pfn;
-	u64 *sptep;
-	gpa_t pte_gpa;
-};
-
 static gfn_t gpte_to_gfn(pt_element_t gpte)
 {
 	return (gpte & PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
@@ -453,54 +439,52 @@ out_unlock:
 	return 0;
 }
 
-static int FNAME(shadow_invlpg_entry)(struct kvm_shadow_walk *_sw,
-				      struct kvm_vcpu *vcpu, u64 addr,
-				      u64 *sptep, int level)
+static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 {
-	struct shadow_walker *sw =
-		container_of(_sw, struct shadow_walker, walker);
+	struct kvm_shadow_walk_iterator iterator;
+	pt_element_t gpte;
+	gpa_t pte_gpa = -1;
+	int level;
+	u64 *sptep;
+
+	spin_lock(&vcpu->kvm->mmu_lock);
 
-	/* FIXME: properly handle invlpg on large guest pages */
-	if (level == PT_PAGE_TABLE_LEVEL ||
-	    ((level == PT_DIRECTORY_LEVEL) && is_large_pte(*sptep))) {
-		struct kvm_mmu_page *sp = page_header(__pa(sptep));
+	for_each_shadow_entry(vcpu, gva, iterator) {
+		level = iterator.level;
+		sptep = iterator.sptep;
 
-		sw->pte_gpa = (sp->gfn << PAGE_SHIFT);
-		sw->pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t);
+		/* FIXME: properly handle invlpg on large guest pages */
+		if (level == PT_PAGE_TABLE_LEVEL ||
+		    ((level == PT_DIRECTORY_LEVEL) && is_large_pte(*sptep))) {
+			struct kvm_mmu_page *sp = page_header(__pa(sptep));
 
-		if (is_shadow_present_pte(*sptep)) {
-			rmap_remove(vcpu->kvm, sptep);
-			if (is_large_pte(*sptep))
-				--vcpu->kvm->stat.lpages;
+			pte_gpa = (sp->gfn << PAGE_SHIFT);
+			pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t);
+
+			if (is_shadow_present_pte(*sptep)) {
+				rmap_remove(vcpu->kvm, sptep);
+				if (is_large_pte(*sptep))
+					--vcpu->kvm->stat.lpages;
+			}
+			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+			break;
 		}
-		set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
-		return 1;
-	}
-	if (!is_shadow_present_pte(*sptep))
-		return 1;
-	return 0;
-}
 
-static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
-{
-	pt_element_t gpte;
-	struct shadow_walker walker = {
-		.walker = { .entry = FNAME(shadow_invlpg_entry), },
-		.pte_gpa = -1,
-	};
+		if (!is_shadow_present_pte(*sptep))
+			break;
+	}
 
-	spin_lock(&vcpu->kvm->mmu_lock);
-	walk_shadow(&walker.walker, vcpu, gva);
 	spin_unlock(&vcpu->kvm->mmu_lock);
-	if (walker.pte_gpa == -1)
+
+	if (pte_gpa == -1)
 		return;
-	if (kvm_read_guest_atomic(vcpu->kvm, walker.pte_gpa, &gpte,
+	if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
 				  sizeof(pt_element_t)))
 		return;
 	if (is_present_pte(gpte) && (gpte & PT_ACCESSED_MASK)) {
 		if (mmu_topup_memory_caches(vcpu))
 			return;
-		kvm_mmu_pte_write(vcpu, walker.pte_gpa, (const u8 *)&gpte,
+		kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte,
 				  sizeof(pt_element_t), 0);
 	}
 }
@@ -607,7 +591,6 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
 #undef pt_element_t
 #undef guest_walker
-#undef shadow_walker
 #undef FNAME
 #undef PT_BASE_ADDR_MASK
 #undef PT_INDEX
-- 
cgit v1.2.3


From e8c4a4e8a7cc047dfb3c26b2cbc8599ad3460364 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 25 Dec 2008 15:20:07 +0200
Subject: KVM: MMU: Drop walk_shadow()

No longer used.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 20 --------------------
 1 file changed, 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index a25e1adb5cf..15850809b55 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -145,11 +145,6 @@ struct kvm_rmap_desc {
 	struct kvm_rmap_desc *more;
 };
 
-struct kvm_shadow_walk {
-	int (*entry)(struct kvm_shadow_walk *walk, struct kvm_vcpu *vcpu,
-		     u64 addr, u64 *spte, int level);
-};
-
 struct kvm_shadow_walk_iterator {
 	u64 addr;
 	hpa_t shadow_addr;
@@ -1299,21 +1294,6 @@ static void shadow_walk_next(struct kvm_shadow_walk_iterator *iterator)
 	--iterator->level;
 }
 
-static int walk_shadow(struct kvm_shadow_walk *walker,
-		       struct kvm_vcpu *vcpu, u64 addr)
-{
-	struct kvm_shadow_walk_iterator iterator;
-	int r;
-
-	for_each_shadow_entry(vcpu, addr, iterator) {
-		r = walker->entry(walker, vcpu, addr,
-				  iterator.sptep, iterator.level);
-		if (r)
-			return r;
-	}
-	return 0;
-}
-
 static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 					 struct kvm_mmu_page *sp)
 {
-- 
cgit v1.2.3


From 53f658b3c33616a4997ee254311b335e59063289 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Dec 2008 20:45:05 +0100
Subject: KVM: VMX: initialize TSC offset relative to vm creation time

VMX initializes the TSC offset for each vcpu at different times, and
also reinitializes it for vcpus other than 0 on APIC SIPI message.

This bug causes the TSC's to appear unsynchronized in the guest, even if
the host is good.

Older Linux kernels don't handle the situation very well, so
gettimeofday is likely to go backwards in time:

http://www.mail-archive.com/kvm@vger.kernel.org/msg02955.html
http://sourceforge.net/tracker/index.php?func=detail&aid=2025534&group_id=180599&atid=893831

Fix it by initializating the offset of each vcpu relative to vm creation
time, and moving it from vmx_vcpu_reset to vmx_vcpu_setup, out of the
APIC MP init path.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/vmx.c              | 19 +++++++++++--------
 arch/x86/kvm/x86.c              |  2 ++
 3 files changed, 14 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c2a01d0513f..9efc446b5ac 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -398,6 +398,7 @@ struct kvm_arch{
 
 	unsigned long irq_sources_bitmap;
 	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
+	u64 vm_init_tsc;
 };
 
 struct kvm_vm_stat {
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index cee81c9a665..3312047664a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -865,11 +865,8 @@ static u64 guest_read_tsc(void)
  * writes 'guest_tsc' into guest's timestamp counter "register"
  * guest_tsc = host_tsc + tsc_offset ==> tsc_offset = guest_tsc - host_tsc
  */
-static void guest_write_tsc(u64 guest_tsc)
+static void guest_write_tsc(u64 guest_tsc, u64 host_tsc)
 {
-	u64 host_tsc;
-
-	rdtscll(host_tsc);
 	vmcs_write64(TSC_OFFSET, guest_tsc - host_tsc);
 }
 
@@ -934,6 +931,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct kvm_msr_entry *msr;
+	u64 host_tsc;
 	int ret = 0;
 
 	switch (msr_index) {
@@ -959,7 +957,8 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 		vmcs_writel(GUEST_SYSENTER_ESP, data);
 		break;
 	case MSR_IA32_TIME_STAMP_COUNTER:
-		guest_write_tsc(data);
+		rdtscll(host_tsc);
+		guest_write_tsc(data, host_tsc);
 		break;
 	case MSR_P6_PERFCTR0:
 	case MSR_P6_PERFCTR1:
@@ -2109,7 +2108,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 {
 	u32 host_sysenter_cs, msr_low, msr_high;
 	u32 junk;
-	u64 host_pat;
+	u64 host_pat, tsc_this, tsc_base;
 	unsigned long a;
 	struct descriptor_table dt;
 	int i;
@@ -2237,6 +2236,12 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
 	vmcs_writel(CR4_GUEST_HOST_MASK, KVM_GUEST_CR4_MASK);
 
+	tsc_base = vmx->vcpu.kvm->arch.vm_init_tsc;
+	rdtscll(tsc_this);
+	if (tsc_this < vmx->vcpu.kvm->arch.vm_init_tsc)
+		tsc_base = tsc_this;
+
+	guest_write_tsc(0, tsc_base);
 
 	return 0;
 }
@@ -2328,8 +2333,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, 0);
 	vmcs_write32(GUEST_PENDING_DBG_EXCEPTIONS, 0);
 
-	guest_write_tsc(0);
-
 	/* Special registers */
 	vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 873602b5edf..3b2acfd72d7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4170,6 +4170,8 @@ struct  kvm *kvm_arch_create_vm(void)
 	/* Reserve bit 0 of irq_sources_bitmap for userspace irq source */
 	set_bit(KVM_USERSPACE_IRQ_SOURCE_ID, &kvm->arch.irq_sources_bitmap);
 
+	rdtscll(kvm->arch.vm_init_tsc);
+
 	return kvm;
 }
 
-- 
cgit v1.2.3


From 77c2002e7c6f019f59a6f3cc5f8b16b41748dbe1 Mon Sep 17 00:00:00 2001
From: Izik Eidus <ieidus@redhat.com>
Date: Mon, 29 Dec 2008 01:42:19 +0200
Subject: KVM: introduce kvm_read_guest_virt, kvm_write_guest_virt

This commit change the name of emulator_read_std into kvm_read_guest_virt,
and add new function name kvm_write_guest_virt that allow writing into a
guest virtual address.

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  4 ---
 arch/x86/kvm/x86.c              | 56 ++++++++++++++++++++++++++++++-----------
 2 files changed, 42 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 9efc446b5ac..b74576aec19 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -609,10 +609,6 @@ void kvm_inject_nmi(struct kvm_vcpu *vcpu);
 
 void fx_init(struct kvm_vcpu *vcpu);
 
-int emulator_read_std(unsigned long addr,
-		      void *val,
-		      unsigned int bytes,
-		      struct kvm_vcpu *vcpu);
 int emulator_write_emulated(unsigned long addr,
 			    const void *val,
 			    unsigned int bytes,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3b2acfd72d7..67f91764e99 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1976,10 +1976,8 @@ static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
 	return dev;
 }
 
-int emulator_read_std(unsigned long addr,
-			     void *val,
-			     unsigned int bytes,
-			     struct kvm_vcpu *vcpu)
+int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
+			struct kvm_vcpu *vcpu)
 {
 	void *data = val;
 	int r = X86EMUL_CONTINUE;
@@ -1987,27 +1985,57 @@ int emulator_read_std(unsigned long addr,
 	while (bytes) {
 		gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
 		unsigned offset = addr & (PAGE_SIZE-1);
-		unsigned tocopy = min(bytes, (unsigned)PAGE_SIZE - offset);
+		unsigned toread = min(bytes, (unsigned)PAGE_SIZE - offset);
 		int ret;
 
 		if (gpa == UNMAPPED_GVA) {
 			r = X86EMUL_PROPAGATE_FAULT;
 			goto out;
 		}
-		ret = kvm_read_guest(vcpu->kvm, gpa, data, tocopy);
+		ret = kvm_read_guest(vcpu->kvm, gpa, data, toread);
 		if (ret < 0) {
 			r = X86EMUL_UNHANDLEABLE;
 			goto out;
 		}
 
-		bytes -= tocopy;
-		data += tocopy;
-		addr += tocopy;
+		bytes -= toread;
+		data += toread;
+		addr += toread;
 	}
 out:
 	return r;
 }
-EXPORT_SYMBOL_GPL(emulator_read_std);
+
+int kvm_write_guest_virt(gva_t addr, void *val, unsigned int bytes,
+			 struct kvm_vcpu *vcpu)
+{
+	void *data = val;
+	int r = X86EMUL_CONTINUE;
+
+	while (bytes) {
+		gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
+		unsigned offset = addr & (PAGE_SIZE-1);
+		unsigned towrite = min(bytes, (unsigned)PAGE_SIZE - offset);
+		int ret;
+
+		if (gpa == UNMAPPED_GVA) {
+			r = X86EMUL_PROPAGATE_FAULT;
+			goto out;
+		}
+		ret = kvm_write_guest(vcpu->kvm, gpa, data, towrite);
+		if (ret < 0) {
+			r = X86EMUL_UNHANDLEABLE;
+			goto out;
+		}
+
+		bytes -= towrite;
+		data += towrite;
+		addr += towrite;
+	}
+out:
+	return r;
+}
+
 
 static int emulator_read_emulated(unsigned long addr,
 				  void *val,
@@ -2029,8 +2057,8 @@ static int emulator_read_emulated(unsigned long addr,
 	if ((gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
 		goto mmio;
 
-	if (emulator_read_std(addr, val, bytes, vcpu)
-			== X86EMUL_CONTINUE)
+	if (kvm_read_guest_virt(addr, val, bytes, vcpu)
+				== X86EMUL_CONTINUE)
 		return X86EMUL_CONTINUE;
 	if (gpa == UNMAPPED_GVA)
 		return X86EMUL_PROPAGATE_FAULT;
@@ -2233,7 +2261,7 @@ void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 
 	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
 
-	emulator_read_std(rip_linear, (void *)opcodes, 4, vcpu);
+	kvm_read_guest_virt(rip_linear, (void *)opcodes, 4, vcpu);
 
 	printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
 	       context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
@@ -2241,7 +2269,7 @@ void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
 static struct x86_emulate_ops emulate_ops = {
-	.read_std            = emulator_read_std,
+	.read_std            = kvm_read_guest_virt,
 	.read_emulated       = emulator_read_emulated,
 	.write_emulated      = emulator_write_emulated,
 	.cmpxchg_emulated    = emulator_cmpxchg_emulated,
-- 
cgit v1.2.3


From 0f346074403bc109f9569f14b45cb09e83729032 Mon Sep 17 00:00:00 2001
From: Izik Eidus <ieidus@redhat.com>
Date: Mon, 29 Dec 2008 01:42:20 +0200
Subject: KVM: remove the vmap usage

vmap() on guest pages hides those pages from the Linux mm for an extended
(userspace determined) amount of time.  Get rid of it.

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 62 ++++++++++++------------------------------------------
 1 file changed, 13 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 67f91764e99..2a4f3a69734 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2371,40 +2371,19 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 }
 EXPORT_SYMBOL_GPL(emulate_instruction);
 
-static void free_pio_guest_pages(struct kvm_vcpu *vcpu)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(vcpu->arch.pio.guest_pages); ++i)
-		if (vcpu->arch.pio.guest_pages[i]) {
-			kvm_release_page_dirty(vcpu->arch.pio.guest_pages[i]);
-			vcpu->arch.pio.guest_pages[i] = NULL;
-		}
-}
-
 static int pio_copy_data(struct kvm_vcpu *vcpu)
 {
 	void *p = vcpu->arch.pio_data;
-	void *q;
+	gva_t q = vcpu->arch.pio.guest_gva;
 	unsigned bytes;
-	int nr_pages = vcpu->arch.pio.guest_pages[1] ? 2 : 1;
+	int ret;
 
-	q = vmap(vcpu->arch.pio.guest_pages, nr_pages, VM_READ|VM_WRITE,
-		 PAGE_KERNEL);
-	if (!q) {
-		free_pio_guest_pages(vcpu);
-		return -ENOMEM;
-	}
-	q += vcpu->arch.pio.guest_page_offset;
 	bytes = vcpu->arch.pio.size * vcpu->arch.pio.cur_count;
 	if (vcpu->arch.pio.in)
-		memcpy(q, p, bytes);
+		ret = kvm_write_guest_virt(q, p, bytes, vcpu);
 	else
-		memcpy(p, q, bytes);
-	q -= vcpu->arch.pio.guest_page_offset;
-	vunmap(q);
-	free_pio_guest_pages(vcpu);
-	return 0;
+		ret = kvm_read_guest_virt(q, p, bytes, vcpu);
+	return ret;
 }
 
 int complete_pio(struct kvm_vcpu *vcpu)
@@ -2515,7 +2494,6 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	vcpu->arch.pio.in = in;
 	vcpu->arch.pio.string = 0;
 	vcpu->arch.pio.down = 0;
-	vcpu->arch.pio.guest_page_offset = 0;
 	vcpu->arch.pio.rep = 0;
 
 	if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
@@ -2543,9 +2521,7 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		  gva_t address, int rep, unsigned port)
 {
 	unsigned now, in_page;
-	int i, ret = 0;
-	int nr_pages = 1;
-	struct page *page;
+	int ret = 0;
 	struct kvm_io_device *pio_dev;
 
 	vcpu->run->exit_reason = KVM_EXIT_IO;
@@ -2557,7 +2533,6 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	vcpu->arch.pio.in = in;
 	vcpu->arch.pio.string = 1;
 	vcpu->arch.pio.down = down;
-	vcpu->arch.pio.guest_page_offset = offset_in_page(address);
 	vcpu->arch.pio.rep = rep;
 
 	if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
@@ -2577,15 +2552,8 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	else
 		in_page = offset_in_page(address) + size;
 	now = min(count, (unsigned long)in_page / size);
-	if (!now) {
-		/*
-		 * String I/O straddles page boundary.  Pin two guest pages
-		 * so that we satisfy atomicity constraints.  Do just one
-		 * transaction to avoid complexity.
-		 */
-		nr_pages = 2;
+	if (!now)
 		now = 1;
-	}
 	if (down) {
 		/*
 		 * String I/O in reverse.  Yuck.  Kill the guest, fix later.
@@ -2600,15 +2568,7 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	if (vcpu->arch.pio.cur_count == vcpu->arch.pio.count)
 		kvm_x86_ops->skip_emulated_instruction(vcpu);
 
-	for (i = 0; i < nr_pages; ++i) {
-		page = gva_to_page(vcpu, address + i * PAGE_SIZE);
-		vcpu->arch.pio.guest_pages[i] = page;
-		if (!page) {
-			kvm_inject_gp(vcpu, 0);
-			free_pio_guest_pages(vcpu);
-			return 1;
-		}
-	}
+	vcpu->arch.pio.guest_gva = address;
 
 	pio_dev = vcpu_find_pio_dev(vcpu, port,
 				    vcpu->arch.pio.cur_count,
@@ -2616,7 +2576,11 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
-		if (ret >= 0 && pio_dev) {
+		if (ret == X86EMUL_PROPAGATE_FAULT) {
+			kvm_inject_gp(vcpu, 0);
+			return 1;
+		}
+		if (ret == 0 && pio_dev) {
 			pio_string_write(pio_dev, vcpu);
 			complete_pio(vcpu);
 			if (vcpu->arch.pio.count == 0)
-- 
cgit v1.2.3


From 61a6bd672bda3b9468bf5895c1be085c4e481138 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 29 Dec 2008 17:32:28 +0200
Subject: KVM: Fallback support for MSR_VM_HSAVE_PA

Since we advertise MSR_VM_HSAVE_PA, userspace will attempt to read it
even on Intel.  Implement fake support for this MSR to avoid the
warnings.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2a4f3a69734..c3fbe8c55c1 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -742,6 +742,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		break;
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
+	case MSR_VM_HSAVE_PA:
 		break;
 	case 0x200 ... 0x2ff:
 		return set_msr_mtrr(vcpu, msr, data);
@@ -863,6 +864,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_LASTBRANCHTOIP:
 	case MSR_IA32_LASTINTFROMIP:
 	case MSR_IA32_LASTINTTOIP:
+	case MSR_VM_HSAVE_PA:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From 52d939a0bf44081bc9f69b4fbdc9e7f416df27c7 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 30 Dec 2008 15:55:06 -0200
Subject: KVM: PIT: provide an option to disable interrupt reinjection

Certain clocks (such as TSC) in older 2.6 guests overaccount for lost
ticks, causing severe time drift. Interrupt reinjection magnifies the
problem.

Provide an option to disable it.

[avi: allow room for expansion in case we want to disable reinjection
      of other timers]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm.h |  5 +++++
 arch/x86/kvm/i8254.c       |  4 ++++
 arch/x86/kvm/i8254.h       |  1 +
 arch/x86/kvm/x86.c         | 21 +++++++++++++++++++++
 4 files changed, 31 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 32eb96c7ca2..54bcf228152 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -233,4 +233,9 @@ struct kvm_guest_debug_arch {
 struct kvm_pit_state {
 	struct kvm_pit_channel_state channels[3];
 };
+
+struct kvm_reinject_control {
+	__u8 pit_reinject;
+	__u8 reserved[31];
+};
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 72bd275a9b5..528daadeba4 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -201,6 +201,9 @@ static int __pit_timer_fn(struct kvm_kpit_state *ps)
 	if (!atomic_inc_and_test(&pt->pending))
 		set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
 
+	if (!pt->reinject)
+		atomic_set(&pt->pending, 1);
+
 	if (vcpu0 && waitqueue_active(&vcpu0->wq))
 		wake_up_interruptible(&vcpu0->wq);
 
@@ -580,6 +583,7 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 	pit_state->irq_ack_notifier.gsi = 0;
 	pit_state->irq_ack_notifier.irq_acked = kvm_pit_ack_irq;
 	kvm_register_irq_ack_notifier(kvm, &pit_state->irq_ack_notifier);
+	pit_state->pit_timer.reinject = true;
 	mutex_unlock(&pit->pit_state.lock);
 
 	kvm_pit_reset(pit);
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index 4178022b97a..76959c4b500 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -9,6 +9,7 @@ struct kvm_kpit_timer {
 	s64 period; /* unit: ns */
 	s64 scheduled;
 	atomic_t pending;
+	bool reinject;
 };
 
 struct kvm_kpit_channel_state {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c3fbe8c55c1..a1f14611f4b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -993,6 +993,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
 	case KVM_CAP_SYNC_MMU:
+	case KVM_CAP_REINJECT_CONTROL:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1728,6 +1729,15 @@ static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 	return r;
 }
 
+static int kvm_vm_ioctl_reinject(struct kvm *kvm,
+				 struct kvm_reinject_control *control)
+{
+	if (!kvm->arch.vpit)
+		return -ENXIO;
+	kvm->arch.vpit->pit_state.pit_timer.reinject = control->pit_reinject;
+	return 0;
+}
+
 /*
  * Get (and clear) the dirty memory log for a memory slot.
  */
@@ -1925,6 +1935,17 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_REINJECT_CONTROL: {
+		struct kvm_reinject_control control;
+		r =  -EFAULT;
+		if (copy_from_user(&control, argp, sizeof(control)))
+			goto out;
+		r = kvm_vm_ioctl_reinject(kvm, &control);
+		if (r)
+			goto out;
+		r = 0;
+		break;
+	}
 	default:
 		;
 	}
-- 
cgit v1.2.3


From 1c08364c3565242f1e1bd585bc2ce458967941af Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 4 Jan 2009 12:39:07 +0200
Subject: KVM: Move struct kvm_pio_request into x86 kvm_host.h

This is an x86 specific stucture and has no business living in common code.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index b74576aec19..863ea73431a 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -227,6 +227,18 @@ struct kvm_pv_mmu_op_buffer {
 	char buf[512] __aligned(sizeof(long));
 };
 
+struct kvm_pio_request {
+	unsigned long count;
+	int cur_count;
+	gva_t guest_gva;
+	int in;
+	int port;
+	int size;
+	int string;
+	int down;
+	int rep;
+};
+
 /*
  * x86 supports 3 paging modes (4-level 64-bit, 3-level 64-bit, and 2-level
  * 32-bit).  The kvm_mmu structure abstracts the details of the current mmu
-- 
cgit v1.2.3


From c46fb0211f8b93de45400bff814c0f29335af5fc Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:22:58 -0600
Subject: KVM: ppc: move struct kvmppc_44x_tlbe into 44x-specific header

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_44x.h  | 7 +++++++
 arch/powerpc/include/asm/kvm_host.h | 7 -------
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_44x.h b/arch/powerpc/include/asm/kvm_44x.h
index f49031b632c..d22d39942a9 100644
--- a/arch/powerpc/include/asm/kvm_44x.h
+++ b/arch/powerpc/include/asm/kvm_44x.h
@@ -28,6 +28,13 @@
  * need to find some way of advertising it. */
 #define KVM44x_GUEST_TLB_SIZE 64
 
+struct kvmppc_44x_tlbe {
+	u32 tid; /* Only the low 8 bits are used. */
+	u32 word0;
+	u32 word1;
+	u32 word2;
+};
+
 struct kvmppc_44x_shadow_ref {
 	struct page *page;
 	u16 gtlb_index;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index a22600537a8..65c4d492d72 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -64,13 +64,6 @@ struct kvm_vcpu_stat {
 	u32 halt_wakeup;
 };
 
-struct kvmppc_44x_tlbe {
-	u32 tid; /* Only the low 8 bits are used. */
-	u32 word0;
-	u32 word1;
-	u32 word2;
-};
-
 enum kvm_exit_types {
 	MMIO_EXITS,
 	DCR_EXITS,
-- 
cgit v1.2.3


From ecc0981ff07cbe7cdf95de20be5b24fee8e49cb5 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:22:59 -0600
Subject: KVM: ppc: cosmetic changes to mmu hook names

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_ppc.h | 5 +++--
 arch/powerpc/kvm/44x_tlb.c         | 2 +-
 arch/powerpc/kvm/powerpc.c         | 2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 36d2a50a848..7ba95d28b83 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -52,13 +52,14 @@ extern int kvmppc_emulate_instruction(struct kvm_run *run,
 extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
 extern void kvmppc_emulate_dec(struct kvm_vcpu *vcpu);
 
+/* Core-specific hooks */
+
 extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
                            u64 asid, u32 flags, u32 max_bytes,
                            unsigned int gtlb_idx);
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
-
-/* Core-specific hooks */
+extern void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu);
 
 extern struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm,
                                                 unsigned int id);
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 9a34b8edb9e..8f9c09cbb83 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -248,7 +248,7 @@ static void kvmppc_44x_shadow_release(struct kvmppc_vcpu_44x *vcpu_44x,
 	KVMTRACE_1D(STLB_INVAL, &vcpu_44x->vcpu, stlb_index, handler);
 }
 
-void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu)
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu);
 	int i;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 7c2ad4017d6..f30be9ef231 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -216,7 +216,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
-	kvmppc_core_destroy_mmu(vcpu);
+	kvmppc_mmu_destroy(vcpu);
 }
 
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
-- 
cgit v1.2.3


From 475e7cdd69101939006659a63c2e4a32d5b71389 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:00 -0600
Subject: KVM: ppc: small cosmetic changes to Book E DTLB miss handler

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/booke.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 35485dd6927..d196ae61930 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -290,6 +290,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		struct kvmppc_44x_tlbe *gtlbe;
 		unsigned long eaddr = vcpu->arch.fault_dear;
 		int gtlb_index;
+		gpa_t gpaddr;
 		gfn_t gfn;
 
 		/* Check the guest TLB. */
@@ -305,8 +306,8 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		}
 
 		gtlbe = &vcpu_44x->guest_tlb[gtlb_index];
-		vcpu->arch.paddr_accessed = tlb_xlate(gtlbe, eaddr);
-		gfn = vcpu->arch.paddr_accessed >> PAGE_SHIFT;
+		gpaddr = tlb_xlate(gtlbe, eaddr);
+		gfn = gpaddr >> PAGE_SHIFT;
 
 		if (kvm_is_visible_gfn(vcpu->kvm, gfn)) {
 			/* The guest TLB had a mapping, but the shadow TLB
@@ -315,13 +316,14 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 * b) the guest used a large mapping which we're faking
 			 * Either way, we need to satisfy the fault without
 			 * invoking the guest. */
-			kvmppc_mmu_map(vcpu, eaddr, vcpu->arch.paddr_accessed, gtlbe->tid,
+			kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlbe->tid,
 			               gtlbe->word2, get_tlb_bytes(gtlbe), gtlb_index);
 			kvmppc_account_exit(vcpu, DTLB_VIRT_MISS_EXITS);
 			r = RESUME_GUEST;
 		} else {
 			/* Guest has mapped and accessed a page which is not
 			 * actually RAM. */
+			vcpu->arch.paddr_accessed = gpaddr;
 			r = kvmppc_emulate_mmio(run, vcpu);
 			kvmppc_account_exit(vcpu, MMIO_EXITS);
 		}
-- 
cgit v1.2.3


From 58a96214a306fc7fc66105097eea9c4f3bfa35bc Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:01 -0600
Subject: KVM: ppc: change kvmppc_mmu_map() parameters

Passing just the TLB index will ease an e500 implementation.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_ppc.h |  1 -
 arch/powerpc/kvm/44x_tlb.c         | 15 +++++++--------
 arch/powerpc/kvm/booke.c           |  6 ++----
 3 files changed, 9 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 7ba95d28b83..f661f8ba3ab 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -55,7 +55,6 @@ extern void kvmppc_emulate_dec(struct kvm_vcpu *vcpu);
 /* Core-specific hooks */
 
 extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
-                           u64 asid, u32 flags, u32 max_bytes,
                            unsigned int gtlb_idx);
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 8f9c09cbb83..e8ed22f28ea 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -269,15 +269,19 @@ void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
  * Caller must ensure that the specified guest TLB entry is safe to insert into
  * the shadow TLB.
  */
-void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr, u64 asid,
-                    u32 flags, u32 max_bytes, unsigned int gtlb_index)
+void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
+                    unsigned int gtlb_index)
 {
 	struct kvmppc_44x_tlbe stlbe;
 	struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu);
+	struct kvmppc_44x_tlbe *gtlbe = &vcpu_44x->guest_tlb[gtlb_index];
 	struct kvmppc_44x_shadow_ref *ref;
 	struct page *new_page;
 	hpa_t hpaddr;
 	gfn_t gfn;
+	u32 asid = gtlbe->tid;
+	u32 flags = gtlbe->word2;
+	u32 max_bytes = get_tlb_bytes(gtlbe);
 	unsigned int victim;
 
 	/* Select TLB entry to clobber. Indirectly guard against races with the TLB
@@ -448,10 +452,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 	}
 
 	if (tlbe_is_host_safe(vcpu, tlbe)) {
-		u64 asid;
 		gva_t eaddr;
 		gpa_t gpaddr;
-		u32 flags;
 		u32 bytes;
 
 		eaddr = get_tlb_eaddr(tlbe);
@@ -462,10 +464,7 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 		eaddr &= ~(bytes - 1);
 		gpaddr &= ~(bytes - 1);
 
-		asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid;
-		flags = tlbe->word2 & 0xffff;
-
-		kvmppc_mmu_map(vcpu, eaddr, gpaddr, asid, flags, bytes, gtlb_index);
+		kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index);
 	}
 
 	KVMTRACE_5D(GTLB_WRITE, vcpu, gtlb_index, tlbe->tid, tlbe->word0,
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index d196ae61930..85b9e2fc6c6 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -316,8 +316,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 * b) the guest used a large mapping which we're faking
 			 * Either way, we need to satisfy the fault without
 			 * invoking the guest. */
-			kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlbe->tid,
-			               gtlbe->word2, get_tlb_bytes(gtlbe), gtlb_index);
+			kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index);
 			kvmppc_account_exit(vcpu, DTLB_VIRT_MISS_EXITS);
 			r = RESUME_GUEST;
 		} else {
@@ -364,8 +363,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 * b) the guest used a large mapping which we're faking
 			 * Either way, we need to satisfy the fault without
 			 * invoking the guest. */
-			kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlbe->tid,
-			               gtlbe->word2, get_tlb_bytes(gtlbe), gtlb_index);
+			kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index);
 		} else {
 			/* Guest mapped and leaped at non-RAM! */
 			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_MACHINE_CHECK);
-- 
cgit v1.2.3


From be8d1cae07d5acf4a61046d7def5eda40f0981e1 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:02 -0600
Subject: KVM: ppc: turn tlb_xlate() into a per-core hook (and give it a better
 name)

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_ppc.h |  2 ++
 arch/powerpc/kvm/44x.c             |  6 +-----
 arch/powerpc/kvm/44x_tlb.c         | 10 ++++++++++
 arch/powerpc/kvm/44x_tlb.h         |  7 -------
 arch/powerpc/kvm/booke.c           | 10 ++--------
 5 files changed, 15 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index f661f8ba3ab..9fd70aa916d 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -59,6 +59,8 @@ extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
 extern void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu);
+extern gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
+                              gva_t eaddr);
 
 extern struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm,
                                                 unsigned int id);
diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index a66bec57265..8383603dd8a 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -149,8 +149,6 @@ int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu)
 int kvmppc_core_vcpu_translate(struct kvm_vcpu *vcpu,
                                struct kvm_translation *tr)
 {
-	struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu);
-	struct kvmppc_44x_tlbe *gtlbe;
 	int index;
 	gva_t eaddr;
 	u8 pid;
@@ -166,9 +164,7 @@ int kvmppc_core_vcpu_translate(struct kvm_vcpu *vcpu,
 		return 0;
 	}
 
-	gtlbe = &vcpu_44x->guest_tlb[index];
-
-	tr->physical_address = tlb_xlate(gtlbe, eaddr);
+	tr->physical_address = kvmppc_mmu_xlate(vcpu, index, eaddr);
 	/* XXX what does "writeable" and "usermode" even mean? */
 	tr->valid = 1;
 
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index e8ed22f28ea..2f14671e8a1 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -208,6 +208,16 @@ int kvmppc_44x_tlb_index(struct kvm_vcpu *vcpu, gva_t eaddr, unsigned int pid,
 	return -1;
 }
 
+gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
+                       gva_t eaddr)
+{
+	struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu);
+	struct kvmppc_44x_tlbe *gtlbe = &vcpu_44x->guest_tlb[gtlb_index];
+	unsigned int pgmask = get_tlb_bytes(gtlbe) - 1;
+
+	return get_tlb_raddr(gtlbe) | (eaddr & pgmask);
+}
+
 int kvmppc_44x_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
 {
 	unsigned int as = !!(vcpu->arch.msr & MSR_IS);
diff --git a/arch/powerpc/kvm/44x_tlb.h b/arch/powerpc/kvm/44x_tlb.h
index 772191f29e6..05b6f7eef5b 100644
--- a/arch/powerpc/kvm/44x_tlb.h
+++ b/arch/powerpc/kvm/44x_tlb.h
@@ -85,11 +85,4 @@ static inline unsigned int get_mmucr_sts(const struct kvm_vcpu *vcpu)
 	return (vcpu->arch.mmucr >> 16) & 0x1;
 }
 
-static inline gpa_t tlb_xlate(struct kvmppc_44x_tlbe *tlbe, gva_t eaddr)
-{
-	unsigned int pgmask = get_tlb_bytes(tlbe) - 1;
-
-	return get_tlb_raddr(tlbe) | (eaddr & pgmask);
-}
-
 #endif /* __KVM_POWERPC_TLB_H__ */
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 85b9e2fc6c6..56d6ed69ed6 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -286,8 +286,6 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 	/* XXX move to a 440-specific file. */
 	case BOOKE_INTERRUPT_DTLB_MISS: {
-		struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu);
-		struct kvmppc_44x_tlbe *gtlbe;
 		unsigned long eaddr = vcpu->arch.fault_dear;
 		int gtlb_index;
 		gpa_t gpaddr;
@@ -305,8 +303,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			break;
 		}
 
-		gtlbe = &vcpu_44x->guest_tlb[gtlb_index];
-		gpaddr = tlb_xlate(gtlbe, eaddr);
+		gpaddr = kvmppc_mmu_xlate(vcpu, gtlb_index, eaddr);
 		gfn = gpaddr >> PAGE_SHIFT;
 
 		if (kvm_is_visible_gfn(vcpu->kvm, gfn)) {
@@ -332,8 +329,6 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 	/* XXX move to a 440-specific file. */
 	case BOOKE_INTERRUPT_ITLB_MISS: {
-		struct kvmppc_vcpu_44x *vcpu_44x = to_44x(vcpu);
-		struct kvmppc_44x_tlbe *gtlbe;
 		unsigned long eaddr = vcpu->arch.pc;
 		gpa_t gpaddr;
 		gfn_t gfn;
@@ -352,8 +347,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 		kvmppc_account_exit(vcpu, ITLB_VIRT_MISS_EXITS);
 
-		gtlbe = &vcpu_44x->guest_tlb[gtlb_index];
-		gpaddr = tlb_xlate(gtlbe, eaddr);
+		gpaddr = kvmppc_mmu_xlate(vcpu, gtlb_index, eaddr);
 		gfn = gpaddr >> PAGE_SHIFT;
 
 		if (kvm_is_visible_gfn(vcpu->kvm, gfn)) {
-- 
cgit v1.2.3


From fa86b8dda2e0faccefbeda61edc02a50bd588f4f Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:03 -0600
Subject: KVM: ppc: rename 44x MMU functions used in booke.c

e500 will provide its own implementation of these.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_ppc.h | 2 ++
 arch/powerpc/kvm/44x_tlb.c         | 4 ++--
 arch/powerpc/kvm/44x_tlb.h         | 2 --
 arch/powerpc/kvm/booke.c           | 4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 9fd70aa916d..5e80a20f32b 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -59,6 +59,8 @@ extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
 extern void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
+extern int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
                               gva_t eaddr);
 
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 2f14671e8a1..e67b7313ffc 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -218,14 +218,14 @@ gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
 	return get_tlb_raddr(gtlbe) | (eaddr & pgmask);
 }
 
-int kvmppc_44x_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
+int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
 {
 	unsigned int as = !!(vcpu->arch.msr & MSR_IS);
 
 	return kvmppc_44x_tlb_index(vcpu, eaddr, vcpu->arch.pid, as);
 }
 
-int kvmppc_44x_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
+int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
 {
 	unsigned int as = !!(vcpu->arch.msr & MSR_DS);
 
diff --git a/arch/powerpc/kvm/44x_tlb.h b/arch/powerpc/kvm/44x_tlb.h
index 05b6f7eef5b..a9ff80e5152 100644
--- a/arch/powerpc/kvm/44x_tlb.h
+++ b/arch/powerpc/kvm/44x_tlb.h
@@ -25,8 +25,6 @@
 
 extern int kvmppc_44x_tlb_index(struct kvm_vcpu *vcpu, gva_t eaddr,
                                 unsigned int pid, unsigned int as);
-extern int kvmppc_44x_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
-extern int kvmppc_44x_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 
 extern int kvmppc_44x_emul_tlbsx(struct kvm_vcpu *vcpu, u8 rt, u8 ra, u8 rb,
                                  u8 rc);
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 56d6ed69ed6..1e692ac16e9 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -292,7 +292,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		gfn_t gfn;
 
 		/* Check the guest TLB. */
-		gtlb_index = kvmppc_44x_dtlb_index(vcpu, eaddr);
+		gtlb_index = kvmppc_mmu_dtlb_index(vcpu, eaddr);
 		if (gtlb_index < 0) {
 			/* The guest didn't have a mapping for it. */
 			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_DTLB_MISS);
@@ -337,7 +337,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		r = RESUME_GUEST;
 
 		/* Check the guest TLB. */
-		gtlb_index = kvmppc_44x_itlb_index(vcpu, eaddr);
+		gtlb_index = kvmppc_mmu_itlb_index(vcpu, eaddr);
 		if (gtlb_index < 0) {
 			/* The guest didn't have a mapping for it. */
 			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_ITLB_MISS);
-- 
cgit v1.2.3


From f44353610b584fcbc31e363f35594796c6446d63 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:04 -0600
Subject: KVM: ppc: remove last 44x-specific bits from booke.c

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/booke.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 1e692ac16e9..a73b3959e41 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -30,10 +30,8 @@
 #include <asm/kvm_ppc.h>
 #include "timing.h"
 #include <asm/cacheflush.h>
-#include <asm/kvm_44x.h>
 
 #include "booke.h"
-#include "44x_tlb.h"
 
 unsigned long kvmppc_booke_handlers;
 
@@ -284,7 +282,6 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		r = RESUME_GUEST;
 		break;
 
-	/* XXX move to a 440-specific file. */
 	case BOOKE_INTERRUPT_DTLB_MISS: {
 		unsigned long eaddr = vcpu->arch.fault_dear;
 		int gtlb_index;
@@ -327,7 +324,6 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		break;
 	}
 
-	/* XXX move to a 440-specific file. */
 	case BOOKE_INTERRUPT_ITLB_MISS: {
 		unsigned long eaddr = vcpu->arch.pc;
 		gpa_t gpaddr;
-- 
cgit v1.2.3


From cea5d8c9de669e30ed6d60930318376d5cc42e9e Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:05 -0600
Subject: KVM: ppc: use macros instead of hardcoded literals for instruction
 decoding

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/emulate.c | 93 +++++++++++++++++++++++++++++++---------------
 1 file changed, 63 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index d1d38daa93f..a561d6e8da1 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -30,6 +30,39 @@
 #include <asm/disassemble.h>
 #include "timing.h"
 
+#define OP_TRAP 3
+
+#define OP_31_XOP_LWZX      23
+#define OP_31_XOP_LBZX      87
+#define OP_31_XOP_STWX      151
+#define OP_31_XOP_STBX      215
+#define OP_31_XOP_STBUX     247
+#define OP_31_XOP_LHZX      279
+#define OP_31_XOP_LHZUX     311
+#define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_STHX      407
+#define OP_31_XOP_STHUX     439
+#define OP_31_XOP_MTSPR     467
+#define OP_31_XOP_DCBI      470
+#define OP_31_XOP_LWBRX     534
+#define OP_31_XOP_TLBSYNC   566
+#define OP_31_XOP_STWBRX    662
+#define OP_31_XOP_LHBRX     790
+#define OP_31_XOP_STHBRX    918
+
+#define OP_LWZ  32
+#define OP_LWZU 33
+#define OP_LBZ  34
+#define OP_LBZU 35
+#define OP_STW  36
+#define OP_STWU 37
+#define OP_STB  38
+#define OP_STBU 39
+#define OP_LHZ  40
+#define OP_LHZU 41
+#define OP_STH  44
+#define OP_STHU 45
+
 void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
 {
 	if (vcpu->arch.tcr & TCR_DIE) {
@@ -78,7 +111,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS);
 
 	switch (get_op(inst)) {
-	case 3:                                             /* trap */
+	case OP_TRAP:
 		vcpu->arch.esr |= ESR_PTR;
 		kvmppc_core_queue_program(vcpu);
 		advance = 0;
@@ -87,31 +120,31 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	case 31:
 		switch (get_xop(inst)) {
 
-		case 23:                                        /* lwzx */
+		case OP_31_XOP_LWZX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
 			break;
 
-		case 87:                                        /* lbzx */
+		case OP_31_XOP_LBZX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 			break;
 
-		case 151:                                       /* stwx */
+		case OP_31_XOP_STWX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
 			                               vcpu->arch.gpr[rs],
 			                               4, 1);
 			break;
 
-		case 215:                                       /* stbx */
+		case OP_31_XOP_STBX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
 			                               vcpu->arch.gpr[rs],
 			                               1, 1);
 			break;
 
-		case 247:                                       /* stbux */
+		case OP_31_XOP_STBUX:
 			rs = get_rs(inst);
 			ra = get_ra(inst);
 			rb = get_rb(inst);
@@ -126,12 +159,12 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			vcpu->arch.gpr[rs] = ea;
 			break;
 
-		case 279:                                       /* lhzx */
+		case OP_31_XOP_LHZX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
 			break;
 
-		case 311:                                       /* lhzux */
+		case OP_31_XOP_LHZUX:
 			rt = get_rt(inst);
 			ra = get_ra(inst);
 			rb = get_rb(inst);
@@ -144,7 +177,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			vcpu->arch.gpr[ra] = ea;
 			break;
 
-		case 339:                                       /* mfspr */
+		case OP_31_XOP_MFSPR:
 			sprn = get_sprn(inst);
 			rt = get_rt(inst);
 
@@ -185,7 +218,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			}
 			break;
 
-		case 407:                                       /* sthx */
+		case OP_31_XOP_STHX:
 			rs = get_rs(inst);
 			ra = get_ra(inst);
 			rb = get_rb(inst);
@@ -195,7 +228,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			                               2, 1);
 			break;
 
-		case 439:                                       /* sthux */
+		case OP_31_XOP_STHUX:
 			rs = get_rs(inst);
 			ra = get_ra(inst);
 			rb = get_rb(inst);
@@ -210,7 +243,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			vcpu->arch.gpr[ra] = ea;
 			break;
 
-		case 467:                                       /* mtspr */
+		case OP_31_XOP_MTSPR:
 			sprn = get_sprn(inst);
 			rs = get_rs(inst);
 			switch (sprn) {
@@ -246,7 +279,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			}
 			break;
 
-		case 470:                                       /* dcbi */
+		case OP_31_XOP_DCBI:
 			/* Do nothing. The guest is performing dcbi because
 			 * hardware DMA is not snooped by the dcache, but
 			 * emulated DMA either goes through the dcache as
@@ -254,15 +287,15 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			 * coherence. */
 			break;
 
-		case 534:                                       /* lwbrx */
+		case OP_31_XOP_LWBRX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 4, 0);
 			break;
 
-		case 566:                                       /* tlbsync */
+		case OP_31_XOP_TLBSYNC:
 			break;
 
-		case 662:                                       /* stwbrx */
+		case OP_31_XOP_STWBRX:
 			rs = get_rs(inst);
 			ra = get_ra(inst);
 			rb = get_rb(inst);
@@ -272,12 +305,12 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			                               4, 0);
 			break;
 
-		case 790:                                       /* lhbrx */
+		case OP_31_XOP_LHBRX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 2, 0);
 			break;
 
-		case 918:                                       /* sthbrx */
+		case OP_31_XOP_STHBRX:
 			rs = get_rs(inst);
 			ra = get_ra(inst);
 			rb = get_rb(inst);
@@ -293,37 +326,37 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		}
 		break;
 
-	case 32:                                                /* lwz */
+	case OP_LWZ:
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
 		break;
 
-	case 33:                                                /* lwzu */
+	case OP_LWZU:
 		ra = get_ra(inst);
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
 		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
 		break;
 
-	case 34:                                                /* lbz */
+	case OP_LBZ:
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 		break;
 
-	case 35:                                                /* lbzu */
+	case OP_LBZU:
 		ra = get_ra(inst);
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
 		break;
 
-	case 36:                                                /* stw */
+	case OP_STW:
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
 		                               4, 1);
 		break;
 
-	case 37:                                                /* stwu */
+	case OP_STWU:
 		ra = get_ra(inst);
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
@@ -331,13 +364,13 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
 		break;
 
-	case 38:                                                /* stb */
+	case OP_STB:
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
 		                               1, 1);
 		break;
 
-	case 39:                                                /* stbu */
+	case OP_STBU:
 		ra = get_ra(inst);
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
@@ -345,25 +378,25 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
 		break;
 
-	case 40:                                                /* lhz */
+	case OP_LHZ:
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
 		break;
 
-	case 41:                                                /* lhzu */
+	case OP_LHZU:
 		ra = get_ra(inst);
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
 		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
 		break;
 
-	case 44:                                                /* sth */
+	case OP_STH:
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
 		                               2, 1);
 		break;
 
-	case 45:                                                /* sthu */
+	case OP_STHU:
 		ra = get_ra(inst);
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
-- 
cgit v1.2.3


From d0c7dc03442f7cbd8740d9a4e7a4e7f84bfa676d Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:06 -0600
Subject: KVM: ppc: split out common Book E instruction emulation

The Book E code will be shared with e500.

I've left PID in kvmppc_core_emulate_op() just so that we don't need to move
kvmppc_set_pid() right now. Once we have the e500 implementation, we can
probably share that too.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/44x_emulate.c   | 217 +++-----------------------------
 arch/powerpc/kvm/Makefile        |   1 +
 arch/powerpc/kvm/booke.h         |   6 +
 arch/powerpc/kvm/booke_emulate.c | 262 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 284 insertions(+), 202 deletions(-)
 create mode 100644 arch/powerpc/kvm/booke_emulate.c

(limited to 'arch')

diff --git a/arch/powerpc/kvm/44x_emulate.c b/arch/powerpc/kvm/44x_emulate.c
index 82489a743a6..61af58fcece 100644
--- a/arch/powerpc/kvm/44x_emulate.c
+++ b/arch/powerpc/kvm/44x_emulate.c
@@ -27,25 +27,12 @@
 #include "booke.h"
 #include "44x_tlb.h"
 
-#define OP_RFI      19
-
-#define XOP_RFI     50
-#define XOP_MFMSR   83
-#define XOP_WRTEE   131
-#define XOP_MTMSR   146
-#define XOP_WRTEEI  163
 #define XOP_MFDCR   323
 #define XOP_MTDCR   451
 #define XOP_TLBSX   914
 #define XOP_ICCCI   966
 #define XOP_TLBWE   978
 
-static void kvmppc_emul_rfi(struct kvm_vcpu *vcpu)
-{
-	vcpu->arch.pc = vcpu->arch.srr0;
-	kvmppc_set_msr(vcpu, vcpu->arch.srr1);
-}
-
 int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
                            unsigned int inst, int *advance)
 {
@@ -59,48 +46,9 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	int ws;
 
 	switch (get_op(inst)) {
-	case OP_RFI:
-		switch (get_xop(inst)) {
-		case XOP_RFI:
-			kvmppc_emul_rfi(vcpu);
-			kvmppc_set_exit_type(vcpu, EMULATED_RFI_EXITS);
-			*advance = 0;
-			break;
-
-		default:
-			emulated = EMULATE_FAIL;
-			break;
-		}
-		break;
-
 	case 31:
 		switch (get_xop(inst)) {
 
-		case XOP_MFMSR:
-			rt = get_rt(inst);
-			vcpu->arch.gpr[rt] = vcpu->arch.msr;
-			kvmppc_set_exit_type(vcpu, EMULATED_MFMSR_EXITS);
-			break;
-
-		case XOP_MTMSR:
-			rs = get_rs(inst);
-			kvmppc_set_exit_type(vcpu, EMULATED_MTMSR_EXITS);
-			kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
-			break;
-
-		case XOP_WRTEE:
-			rs = get_rs(inst);
-			vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
-							 | (vcpu->arch.gpr[rs] & MSR_EE);
-			kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
-			break;
-
-		case XOP_WRTEEI:
-			vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
-							 | (inst & MSR_EE);
-			kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
-			break;
-
 		case XOP_MFDCR:
 			dcrn = get_dcrn(inst);
 			rt = get_rt(inst);
@@ -186,186 +134,51 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		emulated = EMULATE_FAIL;
 	}
 
+	if (emulated == EMULATE_FAIL)
+		emulated = kvmppc_booke_emulate_op(run, vcpu, inst, advance);
+
 	return emulated;
 }
 
 int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 {
+	int emulated = EMULATE_DONE;
+
 	switch (sprn) {
-	case SPRN_MMUCR:
-		vcpu->arch.mmucr = vcpu->arch.gpr[rs]; break;
 	case SPRN_PID:
 		kvmppc_set_pid(vcpu, vcpu->arch.gpr[rs]); break;
+	case SPRN_MMUCR:
+		vcpu->arch.mmucr = vcpu->arch.gpr[rs]; break;
 	case SPRN_CCR0:
 		vcpu->arch.ccr0 = vcpu->arch.gpr[rs]; break;
 	case SPRN_CCR1:
 		vcpu->arch.ccr1 = vcpu->arch.gpr[rs]; break;
-	case SPRN_DEAR:
-		vcpu->arch.dear = vcpu->arch.gpr[rs]; break;
-	case SPRN_ESR:
-		vcpu->arch.esr = vcpu->arch.gpr[rs]; break;
-	case SPRN_DBCR0:
-		vcpu->arch.dbcr0 = vcpu->arch.gpr[rs]; break;
-	case SPRN_DBCR1:
-		vcpu->arch.dbcr1 = vcpu->arch.gpr[rs]; break;
-	case SPRN_TSR:
-		vcpu->arch.tsr &= ~vcpu->arch.gpr[rs]; break;
-	case SPRN_TCR:
-		vcpu->arch.tcr = vcpu->arch.gpr[rs];
-		kvmppc_emulate_dec(vcpu);
-		break;
-
-	/* Note: SPRG4-7 are user-readable. These values are
-	 * loaded into the real SPRGs when resuming the
-	 * guest. */
-	case SPRN_SPRG4:
-		vcpu->arch.sprg4 = vcpu->arch.gpr[rs]; break;
-	case SPRN_SPRG5:
-		vcpu->arch.sprg5 = vcpu->arch.gpr[rs]; break;
-	case SPRN_SPRG6:
-		vcpu->arch.sprg6 = vcpu->arch.gpr[rs]; break;
-	case SPRN_SPRG7:
-		vcpu->arch.sprg7 = vcpu->arch.gpr[rs]; break;
-
-	case SPRN_IVPR:
-		vcpu->arch.ivpr = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR0:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR1:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR2:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR3:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR4:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR5:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR6:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR7:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR8:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR9:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR10:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR11:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_FIT] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR12:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR13:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR14:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IVOR15:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG] = vcpu->arch.gpr[rs];
-		break;
-
 	default:
-		return EMULATE_FAIL;
+		emulated = kvmppc_booke_emulate_mtspr(vcpu, sprn, rs);
 	}
 
 	kvmppc_set_exit_type(vcpu, EMULATED_MTSPR_EXITS);
-	return EMULATE_DONE;
+	return emulated;
 }
 
 int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 {
+	int emulated = EMULATE_DONE;
+
 	switch (sprn) {
-	/* 440 */
+	case SPRN_PID:
+		vcpu->arch.gpr[rt] = vcpu->arch.pid; break;
 	case SPRN_MMUCR:
 		vcpu->arch.gpr[rt] = vcpu->arch.mmucr; break;
 	case SPRN_CCR0:
 		vcpu->arch.gpr[rt] = vcpu->arch.ccr0; break;
 	case SPRN_CCR1:
 		vcpu->arch.gpr[rt] = vcpu->arch.ccr1; break;
-
-	/* Book E */
-	case SPRN_PID:
-		vcpu->arch.gpr[rt] = vcpu->arch.pid; break;
-	case SPRN_IVPR:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivpr; break;
-	case SPRN_DEAR:
-		vcpu->arch.gpr[rt] = vcpu->arch.dear; break;
-	case SPRN_ESR:
-		vcpu->arch.gpr[rt] = vcpu->arch.esr; break;
-	case SPRN_DBCR0:
-		vcpu->arch.gpr[rt] = vcpu->arch.dbcr0; break;
-	case SPRN_DBCR1:
-		vcpu->arch.gpr[rt] = vcpu->arch.dbcr1; break;
-
-	case SPRN_IVOR0:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL];
-		break;
-	case SPRN_IVOR1:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK];
-		break;
-	case SPRN_IVOR2:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE];
-		break;
-	case SPRN_IVOR3:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE];
-		break;
-	case SPRN_IVOR4:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL];
-		break;
-	case SPRN_IVOR5:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT];
-		break;
-	case SPRN_IVOR6:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM];
-		break;
-	case SPRN_IVOR7:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL];
-		break;
-	case SPRN_IVOR8:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL];
-		break;
-	case SPRN_IVOR9:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL];
-		break;
-	case SPRN_IVOR10:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER];
-		break;
-	case SPRN_IVOR11:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_FIT];
-		break;
-	case SPRN_IVOR12:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG];
-		break;
-	case SPRN_IVOR13:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS];
-		break;
-	case SPRN_IVOR14:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS];
-		break;
-	case SPRN_IVOR15:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG];
-		break;
-
 	default:
-		return EMULATE_FAIL;
+		emulated = kvmppc_booke_emulate_mfspr(vcpu, sprn, rt);
 	}
 
 	kvmppc_set_exit_type(vcpu, EMULATED_MFSPR_EXITS);
-	return EMULATE_DONE;
+	return emulated;
 }
 
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index df7ba59e6d5..3ef5261828e 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -16,6 +16,7 @@ AFLAGS_booke_interrupts.o := -I$(obj)
 
 kvm-440-objs := \
 	booke.o \
+	booke_emulate.o \
 	booke_interrupts.o \
 	44x.o \
 	44x_tlb.o \
diff --git a/arch/powerpc/kvm/booke.h b/arch/powerpc/kvm/booke.h
index cf7c94ca24b..311fdbc23fb 100644
--- a/arch/powerpc/kvm/booke.h
+++ b/arch/powerpc/kvm/booke.h
@@ -22,6 +22,7 @@
 
 #include <linux/types.h>
 #include <linux/kvm_host.h>
+#include <asm/kvm_ppc.h>
 #include "timing.h"
 
 /* interrupt priortity ordering */
@@ -57,4 +58,9 @@ static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
 	};
 }
 
+int kvmppc_booke_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                            unsigned int inst, int *advance);
+int kvmppc_booke_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt);
+int kvmppc_booke_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs);
+
 #endif /* __KVM_BOOKE_H__ */
diff --git a/arch/powerpc/kvm/booke_emulate.c b/arch/powerpc/kvm/booke_emulate.c
new file mode 100644
index 00000000000..8aa78f1a1f8
--- /dev/null
+++ b/arch/powerpc/kvm/booke_emulate.c
@@ -0,0 +1,262 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/disassemble.h>
+
+#include "booke.h"
+
+#define OP_19_XOP_RFI     50
+
+#define OP_31_XOP_MFMSR   83
+#define OP_31_XOP_WRTEE   131
+#define OP_31_XOP_MTMSR   146
+#define OP_31_XOP_WRTEEI  163
+
+static void kvmppc_emul_rfi(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.pc = vcpu->arch.srr0;
+	kvmppc_set_msr(vcpu, vcpu->arch.srr1);
+}
+
+int kvmppc_booke_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                            unsigned int inst, int *advance)
+{
+	int emulated = EMULATE_DONE;
+	int rs;
+	int rt;
+
+	switch (get_op(inst)) {
+	case 19:
+		switch (get_xop(inst)) {
+		case OP_19_XOP_RFI:
+			kvmppc_emul_rfi(vcpu);
+			kvmppc_set_exit_type(vcpu, EMULATED_RFI_EXITS);
+			*advance = 0;
+			break;
+
+		default:
+			emulated = EMULATE_FAIL;
+			break;
+		}
+		break;
+
+	case 31:
+		switch (get_xop(inst)) {
+
+		case OP_31_XOP_MFMSR:
+			rt = get_rt(inst);
+			vcpu->arch.gpr[rt] = vcpu->arch.msr;
+			kvmppc_set_exit_type(vcpu, EMULATED_MFMSR_EXITS);
+			break;
+
+		case OP_31_XOP_MTMSR:
+			rs = get_rs(inst);
+			kvmppc_set_exit_type(vcpu, EMULATED_MTMSR_EXITS);
+			kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
+			break;
+
+		case OP_31_XOP_WRTEE:
+			rs = get_rs(inst);
+			vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
+							 | (vcpu->arch.gpr[rs] & MSR_EE);
+			kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
+			break;
+
+		case OP_31_XOP_WRTEEI:
+			vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
+							 | (inst & MSR_EE);
+			kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
+			break;
+
+		default:
+			emulated = EMULATE_FAIL;
+		}
+
+		break;
+
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	return emulated;
+}
+
+int kvmppc_booke_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_DEAR:
+		vcpu->arch.dear = vcpu->arch.gpr[rs]; break;
+	case SPRN_ESR:
+		vcpu->arch.esr = vcpu->arch.gpr[rs]; break;
+	case SPRN_DBCR0:
+		vcpu->arch.dbcr0 = vcpu->arch.gpr[rs]; break;
+	case SPRN_DBCR1:
+		vcpu->arch.dbcr1 = vcpu->arch.gpr[rs]; break;
+	case SPRN_TSR:
+		vcpu->arch.tsr &= ~vcpu->arch.gpr[rs]; break;
+	case SPRN_TCR:
+		vcpu->arch.tcr = vcpu->arch.gpr[rs];
+		kvmppc_emulate_dec(vcpu);
+		break;
+
+	/* Note: SPRG4-7 are user-readable. These values are
+	 * loaded into the real SPRGs when resuming the
+	 * guest. */
+	case SPRN_SPRG4:
+		vcpu->arch.sprg4 = vcpu->arch.gpr[rs]; break;
+	case SPRN_SPRG5:
+		vcpu->arch.sprg5 = vcpu->arch.gpr[rs]; break;
+	case SPRN_SPRG6:
+		vcpu->arch.sprg6 = vcpu->arch.gpr[rs]; break;
+	case SPRN_SPRG7:
+		vcpu->arch.sprg7 = vcpu->arch.gpr[rs]; break;
+
+	case SPRN_IVPR:
+		vcpu->arch.ivpr = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR0:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR1:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR2:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR3:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR4:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR5:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR6:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR7:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR8:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR9:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR10:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR11:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_FIT] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR12:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR13:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR14:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR15:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG] = vcpu->arch.gpr[rs];
+		break;
+
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	return emulated;
+}
+
+int kvmppc_booke_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_IVPR:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivpr; break;
+	case SPRN_DEAR:
+		vcpu->arch.gpr[rt] = vcpu->arch.dear; break;
+	case SPRN_ESR:
+		vcpu->arch.gpr[rt] = vcpu->arch.esr; break;
+	case SPRN_DBCR0:
+		vcpu->arch.gpr[rt] = vcpu->arch.dbcr0; break;
+	case SPRN_DBCR1:
+		vcpu->arch.gpr[rt] = vcpu->arch.dbcr1; break;
+
+	case SPRN_IVOR0:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL];
+		break;
+	case SPRN_IVOR1:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK];
+		break;
+	case SPRN_IVOR2:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE];
+		break;
+	case SPRN_IVOR3:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE];
+		break;
+	case SPRN_IVOR4:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL];
+		break;
+	case SPRN_IVOR5:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT];
+		break;
+	case SPRN_IVOR6:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM];
+		break;
+	case SPRN_IVOR7:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL];
+		break;
+	case SPRN_IVOR8:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL];
+		break;
+	case SPRN_IVOR9:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL];
+		break;
+	case SPRN_IVOR10:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER];
+		break;
+	case SPRN_IVOR11:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_FIT];
+		break;
+	case SPRN_IVOR12:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG];
+		break;
+	case SPRN_IVOR13:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS];
+		break;
+	case SPRN_IVOR14:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS];
+		break;
+	case SPRN_IVOR15:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG];
+		break;
+
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	return emulated;
+}
-- 
cgit v1.2.3


From f7b200af8f1da748cc67993caeff3923d6014070 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:07 -0600
Subject: KVM: ppc: Add dbsr in kvm_vcpu_arch

Kernel for E500 need clear dbsr when startup.
So add dbsr register in kvm_vcpu_arch for BOOKE.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_host.h | 1 +
 arch/powerpc/kvm/booke_emulate.c    | 4 ++++
 2 files changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 65c4d492d72..50e5ce1b400 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -163,6 +163,7 @@ struct kvm_vcpu_arch {
 	u32 ccr1;
 	u32 dbcr0;
 	u32 dbcr1;
+	u32 dbsr;
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	struct kvmppc_exit_timing timing_exit;
diff --git a/arch/powerpc/kvm/booke_emulate.c b/arch/powerpc/kvm/booke_emulate.c
index 8aa78f1a1f8..aebc65e93f4 100644
--- a/arch/powerpc/kvm/booke_emulate.c
+++ b/arch/powerpc/kvm/booke_emulate.c
@@ -111,6 +111,8 @@ int kvmppc_booke_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 		vcpu->arch.dbcr0 = vcpu->arch.gpr[rs]; break;
 	case SPRN_DBCR1:
 		vcpu->arch.dbcr1 = vcpu->arch.gpr[rs]; break;
+	case SPRN_DBSR:
+		vcpu->arch.dbsr &= ~vcpu->arch.gpr[rs]; break;
 	case SPRN_TSR:
 		vcpu->arch.tsr &= ~vcpu->arch.gpr[rs]; break;
 	case SPRN_TCR:
@@ -204,6 +206,8 @@ int kvmppc_booke_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 		vcpu->arch.gpr[rt] = vcpu->arch.dbcr0; break;
 	case SPRN_DBCR1:
 		vcpu->arch.gpr[rt] = vcpu->arch.dbcr1; break;
+	case SPRN_DBSR:
+		vcpu->arch.gpr[rt] = vcpu->arch.dbsr; break;
 
 	case SPRN_IVOR0:
 		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL];
-- 
cgit v1.2.3


From 366d4b9b9fdda282006b97316f8038cd36f8ecb7 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:08 -0600
Subject: KVM: ppc: No need to include core-header for KVM in asm-offsets.c
 currently

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kernel/asm-offsets.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 19ee491e9e2..42fe4da4e8a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -49,7 +49,7 @@
 #include <asm/iseries/alpaca.h>
 #endif
 #ifdef CONFIG_KVM
-#include <asm/kvm_44x.h>
+#include <linux/kvm_host.h>
 #endif
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
@@ -361,8 +361,6 @@ int main(void)
 	DEFINE(PTE_SIZE, sizeof(pte_t));
 
 #ifdef CONFIG_KVM
-	DEFINE(TLBE_BYTES, sizeof(struct kvmppc_44x_tlbe));
-
 	DEFINE(VCPU_HOST_STACK, offsetof(struct kvm_vcpu, arch.host_stack));
 	DEFINE(VCPU_HOST_PID, offsetof(struct kvm_vcpu, arch.host_pid));
 	DEFINE(VCPU_GPRS, offsetof(struct kvm_vcpu, arch.gpr));
-- 
cgit v1.2.3


From 17c885eb5c38f39a2bb3143a67687bd905dcd0fa Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:09 -0600
Subject: KVM: ppc: ifdef iccci with CONFIG_44x

E500 deosn't support this instruction.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/booke_interrupts.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index 084ebcd7dd8..4679ec287e6 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -347,7 +347,9 @@ lightweight_exit:
 	lwz	r3, VCPU_SHADOW_PID(r4)
 	mtspr	SPRN_PID, r3
 
+#ifdef CONFIG_44x
 	iccci	0, 0 /* XXX hack */
+#endif
 
 	/* Load some guest volatiles. */
 	lwz	r0, VCPU_GPR(r0)(r4)
-- 
cgit v1.2.3


From bc8080cbcc8870178f0910edd537d0cb5706d703 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:10 -0600
Subject: KVM: ppc: E500 core-specific code

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_e500.h |  67 ++++
 arch/powerpc/kvm/Kconfig            |  13 +
 arch/powerpc/kvm/Makefile           |   9 +
 arch/powerpc/kvm/e500.c             | 151 ++++++++
 arch/powerpc/kvm/e500_emulate.c     | 169 +++++++++
 arch/powerpc/kvm/e500_tlb.c         | 737 ++++++++++++++++++++++++++++++++++++
 arch/powerpc/kvm/e500_tlb.h         | 184 +++++++++
 7 files changed, 1330 insertions(+)
 create mode 100644 arch/powerpc/include/asm/kvm_e500.h
 create mode 100644 arch/powerpc/kvm/e500.c
 create mode 100644 arch/powerpc/kvm/e500_emulate.c
 create mode 100644 arch/powerpc/kvm/e500_tlb.c
 create mode 100644 arch/powerpc/kvm/e500_tlb.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_e500.h b/arch/powerpc/include/asm/kvm_e500.h
new file mode 100644
index 00000000000..9d497ce4972
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_e500.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Yu Liu, <yu.liu@freescale.com>
+ *
+ * Description:
+ * This file is derived from arch/powerpc/include/asm/kvm_44x.h,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_KVM_E500_H__
+#define __ASM_KVM_E500_H__
+
+#include <linux/kvm_host.h>
+
+#define BOOKE_INTERRUPT_SIZE 36
+
+#define E500_PID_NUM   3
+#define E500_TLB_NUM   2
+
+struct tlbe{
+	u32 mas1;
+	u32 mas2;
+	u32 mas3;
+	u32 mas7;
+};
+
+struct kvmppc_vcpu_e500 {
+	/* Unmodified copy of the guest's TLB. */
+	struct tlbe *guest_tlb[E500_TLB_NUM];
+	/* TLB that's actually used when the guest is running. */
+	struct tlbe *shadow_tlb[E500_TLB_NUM];
+	/* Pages which are referenced in the shadow TLB. */
+	struct page **shadow_pages[E500_TLB_NUM];
+
+	unsigned int guest_tlb_size[E500_TLB_NUM];
+	unsigned int shadow_tlb_size[E500_TLB_NUM];
+	unsigned int guest_tlb_nv[E500_TLB_NUM];
+
+	u32 host_pid[E500_PID_NUM];
+	u32 pid[E500_PID_NUM];
+
+	u32 mas0;
+	u32 mas1;
+	u32 mas2;
+	u32 mas3;
+	u32 mas4;
+	u32 mas5;
+	u32 mas6;
+	u32 mas7;
+	u32 l1csr1;
+	u32 hid0;
+	u32 hid1;
+
+	struct kvm_vcpu vcpu;
+};
+
+static inline struct kvmppc_vcpu_e500 *to_e500(struct kvm_vcpu *vcpu)
+{
+	return container_of(vcpu, struct kvmppc_vcpu_e500, vcpu);
+}
+
+#endif /* __ASM_KVM_E500_H__ */
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 6dbdc4817d8..14657055014 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -43,6 +43,19 @@ config KVM_EXIT_TIMING
 
 	  If unsure, say N.
 
+config KVM_E500
+	bool "KVM support for PowerPC E500 processors"
+	depends on EXPERIMENTAL && E500
+	select KVM
+	---help---
+	  Support running unmodified E500 guest kernels in virtual machines on
+	  E500 host processors.
+
+	  This module provides access to the hardware capabilities through
+	  a character device node named /dev/kvm.
+
+	  If unsure, say N.
+
 config KVM_TRACE
 	bool "KVM trace support"
 	depends on KVM && MARKERS && SYSFS
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 3ef5261828e..4b2df66c79d 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -22,3 +22,12 @@ kvm-440-objs := \
 	44x_tlb.o \
 	44x_emulate.o
 obj-$(CONFIG_KVM_440) += kvm-440.o
+
+kvm-e500-objs := \
+	booke.o \
+	booke_emulate.o \
+	booke_interrupts.o \
+	e500.o \
+	e500_tlb.o \
+	e500_emulate.o
+obj-$(CONFIG_KVM_E500) += kvm-e500.o
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
new file mode 100644
index 00000000000..7992da497cd
--- /dev/null
+++ b/arch/powerpc/kvm/e500.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Yu Liu, <yu.liu@freescale.com>
+ *
+ * Description:
+ * This file is derived from arch/powerpc/kvm/44x.c,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/err.h>
+
+#include <asm/reg.h>
+#include <asm/cputable.h>
+#include <asm/tlbflush.h>
+#include <asm/kvm_e500.h>
+#include <asm/kvm_ppc.h>
+
+#include "e500_tlb.h"
+
+void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+	kvmppc_e500_tlb_load(vcpu, cpu);
+}
+
+void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu)
+{
+	kvmppc_e500_tlb_put(vcpu);
+}
+
+int kvmppc_core_check_processor_compat(void)
+{
+	int r;
+
+	if (strcmp(cur_cpu_spec->cpu_name, "e500v2") == 0)
+		r = 0;
+	else
+		r = -ENOTSUPP;
+
+	return r;
+}
+
+int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+
+	kvmppc_e500_tlb_setup(vcpu_e500);
+
+	/* Use the same core vertion as host's */
+	vcpu->arch.pvr = mfspr(SPRN_PVR);
+
+	return 0;
+}
+
+/* 'linear_address' is actually an encoding of AS|PID|EADDR . */
+int kvmppc_core_vcpu_translate(struct kvm_vcpu *vcpu,
+                               struct kvm_translation *tr)
+{
+	int index;
+	gva_t eaddr;
+	u8 pid;
+	u8 as;
+
+	eaddr = tr->linear_address;
+	pid = (tr->linear_address >> 32) & 0xff;
+	as = (tr->linear_address >> 40) & 0x1;
+
+	index = kvmppc_e500_tlb_search(vcpu, eaddr, pid, as);
+	if (index < 0) {
+		tr->valid = 0;
+		return 0;
+	}
+
+	tr->physical_address = kvmppc_mmu_xlate(vcpu, index, eaddr);
+	/* XXX what does "writeable" and "usermode" even mean? */
+	tr->valid = 1;
+
+	return 0;
+}
+
+struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500;
+	struct kvm_vcpu *vcpu;
+	int err;
+
+	vcpu_e500 = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
+	if (!vcpu_e500) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	vcpu = &vcpu_e500->vcpu;
+	err = kvm_vcpu_init(vcpu, kvm, id);
+	if (err)
+		goto free_vcpu;
+
+	err = kvmppc_e500_tlb_init(vcpu_e500);
+	if (err)
+		goto uninit_vcpu;
+
+	return vcpu;
+
+uninit_vcpu:
+	kvm_vcpu_uninit(vcpu);
+free_vcpu:
+	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
+out:
+	return ERR_PTR(err);
+}
+
+void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+
+	kvmppc_e500_tlb_uninit(vcpu_e500);
+	kvm_vcpu_uninit(vcpu);
+	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
+}
+
+static int kvmppc_e500_init(void)
+{
+	int r;
+
+	r = kvmppc_booke_init();
+	if (r)
+		return r;
+
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
+}
+
+static void kvmppc_e500_exit(void)
+{
+	kvmppc_booke_exit();
+}
+
+module_init(kvmppc_e500_init);
+module_exit(kvmppc_e500_exit);
diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
new file mode 100644
index 00000000000..a47f44cd2cf
--- /dev/null
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Yu Liu, <yu.liu@freescale.com>
+ *
+ * Description:
+ * This file is derived from arch/powerpc/kvm/44x_emulate.c,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_e500.h>
+
+#include "booke.h"
+#include "e500_tlb.h"
+
+#define XOP_TLBIVAX 786
+#define XOP_TLBSX   914
+#define XOP_TLBRE   946
+#define XOP_TLBWE   978
+
+int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                           unsigned int inst, int *advance)
+{
+	int emulated = EMULATE_DONE;
+	int ra;
+	int rb;
+	int rs;
+	int rt;
+
+	switch (get_op(inst)) {
+	case 31:
+		switch (get_xop(inst)) {
+
+		case XOP_TLBRE:
+			emulated = kvmppc_e500_emul_tlbre(vcpu);
+			break;
+
+		case XOP_TLBWE:
+			emulated = kvmppc_e500_emul_tlbwe(vcpu);
+			break;
+
+		case XOP_TLBSX:
+			rb = get_rb(inst);
+			emulated = kvmppc_e500_emul_tlbsx(vcpu,rb);
+			break;
+
+		case XOP_TLBIVAX:
+			ra = get_ra(inst);
+			rb = get_rb(inst);
+			emulated = kvmppc_e500_emul_tlbivax(vcpu, ra, rb);
+			break;
+
+		default:
+			emulated = EMULATE_FAIL;
+		}
+
+		break;
+
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	if (emulated == EMULATE_FAIL)
+		emulated = kvmppc_booke_emulate_op(run, vcpu, inst, advance);
+
+	return emulated;
+}
+
+int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_PID:
+		vcpu_e500->pid[0] = vcpu->arch.shadow_pid =
+			vcpu->arch.pid = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_PID1:
+		vcpu_e500->pid[1] = vcpu->arch.gpr[rs]; break;
+	case SPRN_PID2:
+		vcpu_e500->pid[2] = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS0:
+		vcpu_e500->mas0 = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS1:
+		vcpu_e500->mas1 = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS2:
+		vcpu_e500->mas2 = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS3:
+		vcpu_e500->mas3 = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS4:
+		vcpu_e500->mas4 = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS6:
+		vcpu_e500->mas6 = vcpu->arch.gpr[rs]; break;
+	case SPRN_MAS7:
+		vcpu_e500->mas7 = vcpu->arch.gpr[rs]; break;
+	case SPRN_L1CSR1:
+		vcpu_e500->l1csr1 = vcpu->arch.gpr[rs]; break;
+	case SPRN_HID0:
+		vcpu_e500->hid0 = vcpu->arch.gpr[rs]; break;
+	case SPRN_HID1:
+		vcpu_e500->hid1 = vcpu->arch.gpr[rs]; break;
+
+	default:
+		emulated = kvmppc_booke_emulate_mtspr(vcpu, sprn, rs);
+	}
+
+	return emulated;
+}
+
+int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_PID:
+		vcpu->arch.gpr[rt] = vcpu_e500->pid[0]; break;
+	case SPRN_PID1:
+		vcpu->arch.gpr[rt] = vcpu_e500->pid[1]; break;
+	case SPRN_PID2:
+		vcpu->arch.gpr[rt] = vcpu_e500->pid[2]; break;
+	case SPRN_MAS0:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas0; break;
+	case SPRN_MAS1:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas1; break;
+	case SPRN_MAS2:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas2; break;
+	case SPRN_MAS3:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas3; break;
+	case SPRN_MAS4:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas4; break;
+	case SPRN_MAS6:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas6; break;
+	case SPRN_MAS7:
+		vcpu->arch.gpr[rt] = vcpu_e500->mas7; break;
+
+	case SPRN_TLB0CFG:
+		vcpu->arch.gpr[rt] = mfspr(SPRN_TLB0CFG);
+		vcpu->arch.gpr[rt] &= ~0xfffUL;
+		vcpu->arch.gpr[rt] |= vcpu_e500->guest_tlb_size[0];
+		break;
+
+	case SPRN_TLB1CFG:
+		vcpu->arch.gpr[rt] = mfspr(SPRN_TLB1CFG);
+		vcpu->arch.gpr[rt] &= ~0xfffUL;
+		vcpu->arch.gpr[rt] |= vcpu_e500->guest_tlb_size[1];
+		break;
+
+	case SPRN_L1CSR1:
+		vcpu->arch.gpr[rt] = vcpu_e500->l1csr1; break;
+	case SPRN_HID0:
+		vcpu->arch.gpr[rt] = vcpu_e500->hid0; break;
+	case SPRN_HID1:
+		vcpu->arch.gpr[rt] = vcpu_e500->hid1; break;
+
+	default:
+		emulated = kvmppc_booke_emulate_mfspr(vcpu, sprn, rt);
+	}
+
+	return emulated;
+}
+
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
new file mode 100644
index 00000000000..6a50340f575
--- /dev/null
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -0,0 +1,737 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Yu Liu, yu.liu@freescale.com
+ *
+ * Description:
+ * This file is based on arch/powerpc/kvm/44x_tlb.c,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_e500.h>
+
+#include "e500_tlb.h"
+
+#define to_htlb1_esel(esel) (tlb1_entry_num - (esel) - 1)
+
+static unsigned int tlb1_entry_num;
+
+void kvmppc_dump_tlbs(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	struct tlbe *tlbe;
+	int i, tlbsel;
+
+	printk("| %8s | %8s | %8s | %8s | %8s |\n",
+			"nr", "mas1", "mas2", "mas3", "mas7");
+
+	for (tlbsel = 0; tlbsel < 2; tlbsel++) {
+		printk("Guest TLB%d:\n", tlbsel);
+		for (i = 0; i < vcpu_e500->guest_tlb_size[tlbsel]; i++) {
+			tlbe = &vcpu_e500->guest_tlb[tlbsel][i];
+			if (tlbe->mas1 & MAS1_VALID)
+				printk(" G[%d][%3d] |  %08X | %08X | %08X | %08X |\n",
+					tlbsel, i, tlbe->mas1, tlbe->mas2,
+					tlbe->mas3, tlbe->mas7);
+		}
+	}
+
+	for (tlbsel = 0; tlbsel < 2; tlbsel++) {
+		printk("Shadow TLB%d:\n", tlbsel);
+		for (i = 0; i < vcpu_e500->shadow_tlb_size[tlbsel]; i++) {
+			tlbe = &vcpu_e500->shadow_tlb[tlbsel][i];
+			if (tlbe->mas1 & MAS1_VALID)
+				printk(" S[%d][%3d] |  %08X | %08X | %08X | %08X |\n",
+					tlbsel, i, tlbe->mas1, tlbe->mas2,
+					tlbe->mas3, tlbe->mas7);
+		}
+	}
+}
+
+static inline unsigned int tlb0_get_next_victim(
+		struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	unsigned int victim;
+
+	victim = vcpu_e500->guest_tlb_nv[0]++;
+	if (unlikely(vcpu_e500->guest_tlb_nv[0] >= KVM_E500_TLB0_WAY_NUM))
+		vcpu_e500->guest_tlb_nv[0] = 0;
+
+	return victim;
+}
+
+static inline unsigned int tlb1_max_shadow_size(void)
+{
+	return tlb1_entry_num - tlbcam_index;
+}
+
+static inline int tlbe_is_writable(struct tlbe *tlbe)
+{
+	return tlbe->mas3 & (MAS3_SW|MAS3_UW);
+}
+
+static inline u32 e500_shadow_mas3_attrib(u32 mas3, int usermode)
+{
+	/* Mask off reserved bits. */
+	mas3 &= MAS3_ATTRIB_MASK;
+
+	if (!usermode) {
+		/* Guest is in supervisor mode,
+		 * so we need to translate guest
+		 * supervisor permissions into user permissions. */
+		mas3 &= ~E500_TLB_USER_PERM_MASK;
+		mas3 |= (mas3 & E500_TLB_SUPER_PERM_MASK) << 1;
+	}
+
+	return mas3 | E500_TLB_SUPER_PERM_MASK;
+}
+
+static inline u32 e500_shadow_mas2_attrib(u32 mas2, int usermode)
+{
+	return mas2 & MAS2_ATTRIB_MASK;
+}
+
+/*
+ * writing shadow tlb entry to host TLB
+ */
+static inline void __write_host_tlbe(struct tlbe *stlbe)
+{
+	mtspr(SPRN_MAS1, stlbe->mas1);
+	mtspr(SPRN_MAS2, stlbe->mas2);
+	mtspr(SPRN_MAS3, stlbe->mas3);
+	mtspr(SPRN_MAS7, stlbe->mas7);
+	__asm__ __volatile__ ("tlbwe\n" : : );
+}
+
+static inline void write_host_tlbe(struct kvmppc_vcpu_e500 *vcpu_e500,
+		int tlbsel, int esel)
+{
+	struct tlbe *stlbe = &vcpu_e500->shadow_tlb[tlbsel][esel];
+
+	local_irq_disable();
+	if (tlbsel == 0) {
+		__write_host_tlbe(stlbe);
+	} else {
+		unsigned register mas0;
+
+		mas0 = mfspr(SPRN_MAS0);
+
+		mtspr(SPRN_MAS0, MAS0_TLBSEL(1) | MAS0_ESEL(to_htlb1_esel(esel)));
+		__write_host_tlbe(stlbe);
+
+		mtspr(SPRN_MAS0, mas0);
+	}
+	local_irq_enable();
+}
+
+void kvmppc_e500_tlb_load(struct kvm_vcpu *vcpu, int cpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int i;
+	unsigned register mas0;
+
+	/* Load all valid TLB1 entries to reduce guest tlb miss fault */
+	local_irq_disable();
+	mas0 = mfspr(SPRN_MAS0);
+	for (i = 0; i < tlb1_max_shadow_size(); i++) {
+		struct tlbe *stlbe = &vcpu_e500->shadow_tlb[1][i];
+
+		if (get_tlb_v(stlbe)) {
+			mtspr(SPRN_MAS0, MAS0_TLBSEL(1)
+					| MAS0_ESEL(to_htlb1_esel(i)));
+			__write_host_tlbe(stlbe);
+		}
+	}
+	mtspr(SPRN_MAS0, mas0);
+	local_irq_enable();
+}
+
+void kvmppc_e500_tlb_put(struct kvm_vcpu *vcpu)
+{
+	_tlbia();
+}
+
+/* Search the guest TLB for a matching entry. */
+static int kvmppc_e500_tlb_index(struct kvmppc_vcpu_e500 *vcpu_e500,
+		gva_t eaddr, int tlbsel, unsigned int pid, int as)
+{
+	int i;
+
+	/* XXX Replace loop with fancy data structures. */
+	for (i = 0; i < vcpu_e500->guest_tlb_size[tlbsel]; i++) {
+		struct tlbe *tlbe = &vcpu_e500->guest_tlb[tlbsel][i];
+		unsigned int tid;
+
+		if (eaddr < get_tlb_eaddr(tlbe))
+			continue;
+
+		if (eaddr > get_tlb_end(tlbe))
+			continue;
+
+		tid = get_tlb_tid(tlbe);
+		if (tid && (tid != pid))
+			continue;
+
+		if (!get_tlb_v(tlbe))
+			continue;
+
+		if (get_tlb_ts(tlbe) != as && as != -1)
+			continue;
+
+		return i;
+	}
+
+	return -1;
+}
+
+static void kvmppc_e500_shadow_release(struct kvmppc_vcpu_e500 *vcpu_e500,
+		int tlbsel, int esel)
+{
+	struct tlbe *stlbe = &vcpu_e500->shadow_tlb[tlbsel][esel];
+	struct page *page = vcpu_e500->shadow_pages[tlbsel][esel];
+
+	if (page) {
+		vcpu_e500->shadow_pages[tlbsel][esel] = NULL;
+
+		if (get_tlb_v(stlbe)) {
+			if (tlbe_is_writable(stlbe))
+				kvm_release_page_dirty(page);
+			else
+				kvm_release_page_clean(page);
+		}
+	}
+}
+
+static void kvmppc_e500_stlbe_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
+		int tlbsel, int esel)
+{
+	struct tlbe *stlbe = &vcpu_e500->shadow_tlb[tlbsel][esel];
+
+	kvmppc_e500_shadow_release(vcpu_e500, tlbsel, esel);
+	stlbe->mas1 = 0;
+	KVMTRACE_5D(STLB_INVAL, &vcpu_e500->vcpu, index_of(tlbsel, esel),
+			stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
+			handler);
+}
+
+static void kvmppc_e500_tlb1_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
+		gva_t eaddr, gva_t eend, u32 tid)
+{
+	unsigned int pid = tid & 0xff;
+	unsigned int i;
+
+	/* XXX Replace loop with fancy data structures. */
+	for (i = 0; i < vcpu_e500->guest_tlb_size[1]; i++) {
+		struct tlbe *stlbe = &vcpu_e500->shadow_tlb[1][i];
+		unsigned int tid;
+
+		if (!get_tlb_v(stlbe))
+			continue;
+
+		if (eend < get_tlb_eaddr(stlbe))
+			continue;
+
+		if (eaddr > get_tlb_end(stlbe))
+			continue;
+
+		tid = get_tlb_tid(stlbe);
+		if (tid && (tid != pid))
+			continue;
+
+		kvmppc_e500_stlbe_invalidate(vcpu_e500, 1, i);
+		write_host_tlbe(vcpu_e500, 1, i);
+	}
+}
+
+static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
+		unsigned int eaddr, int as)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	unsigned int victim, pidsel, tsized;
+	int tlbsel;
+
+	/* since we only have tow TLBs, only lower bit is used. */
+	tlbsel = (vcpu_e500->mas4 >> 28) & 0x1;
+	victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
+	pidsel = (vcpu_e500->mas4 >> 16) & 0xf;
+	tsized = (vcpu_e500->mas4 >> 8) & 0xf;
+
+	vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(victim)
+		| MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
+	vcpu_e500->mas1 = MAS1_VALID | (as ? MAS1_TS : 0)
+		| MAS1_TID(vcpu_e500->pid[pidsel])
+		| MAS1_TSIZE(tsized);
+	vcpu_e500->mas2 = (eaddr & MAS2_EPN)
+		| (vcpu_e500->mas4 & MAS2_ATTRIB_MASK);
+	vcpu_e500->mas3 &= MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3;
+	vcpu_e500->mas6 = (vcpu_e500->mas6 & MAS6_SPID1)
+		| (get_cur_pid(vcpu) << 16)
+		| (as ? MAS6_SAS : 0);
+	vcpu_e500->mas7 = 0;
+}
+
+static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
+	u64 gvaddr, gfn_t gfn, struct tlbe *gtlbe, int tlbsel, int esel)
+{
+	struct page *new_page;
+	struct tlbe *stlbe;
+	hpa_t hpaddr;
+
+	stlbe = &vcpu_e500->shadow_tlb[tlbsel][esel];
+
+	/* Get reference to new page. */
+	new_page = gfn_to_page(vcpu_e500->vcpu.kvm, gfn);
+	if (is_error_page(new_page)) {
+		printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
+		kvm_release_page_clean(new_page);
+		return;
+	}
+	hpaddr = page_to_phys(new_page);
+
+	/* Drop reference to old page. */
+	kvmppc_e500_shadow_release(vcpu_e500, tlbsel, esel);
+
+	vcpu_e500->shadow_pages[tlbsel][esel] = new_page;
+
+	/* Force TS=1 IPROT=0 TSIZE=4KB for all guest mappings. */
+	stlbe->mas1 = MAS1_TSIZE(BOOKE_PAGESZ_4K)
+		| MAS1_TID(get_tlb_tid(gtlbe)) | MAS1_TS | MAS1_VALID;
+	stlbe->mas2 = (gvaddr & MAS2_EPN)
+		| e500_shadow_mas2_attrib(gtlbe->mas2,
+				vcpu_e500->vcpu.arch.msr & MSR_PR);
+	stlbe->mas3 = (hpaddr & MAS3_RPN)
+		| e500_shadow_mas3_attrib(gtlbe->mas3,
+				vcpu_e500->vcpu.arch.msr & MSR_PR);
+	stlbe->mas7 = (hpaddr >> 32) & MAS7_RPN;
+
+	KVMTRACE_5D(STLB_WRITE, &vcpu_e500->vcpu, index_of(tlbsel, esel),
+			stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
+			handler);
+}
+
+/* XXX only map the one-one case, for now use TLB0 */
+static int kvmppc_e500_stlbe_map(struct kvmppc_vcpu_e500 *vcpu_e500,
+		int tlbsel, int esel)
+{
+	struct tlbe *gtlbe;
+
+	gtlbe = &vcpu_e500->guest_tlb[tlbsel][esel];
+
+	kvmppc_e500_shadow_map(vcpu_e500, get_tlb_eaddr(gtlbe),
+			get_tlb_raddr(gtlbe) >> PAGE_SHIFT,
+			gtlbe, tlbsel, esel);
+
+	return esel;
+}
+
+/* Caller must ensure that the specified guest TLB entry is safe to insert into
+ * the shadow TLB. */
+/* XXX for both one-one and one-to-many , for now use TLB1 */
+static int kvmppc_e500_tlb1_map(struct kvmppc_vcpu_e500 *vcpu_e500,
+		u64 gvaddr, gfn_t gfn, struct tlbe *gtlbe)
+{
+	unsigned int victim;
+
+	victim = vcpu_e500->guest_tlb_nv[1]++;
+
+	if (unlikely(vcpu_e500->guest_tlb_nv[1] >= tlb1_max_shadow_size()))
+		vcpu_e500->guest_tlb_nv[1] = 0;
+
+	kvmppc_e500_shadow_map(vcpu_e500, gvaddr, gfn, gtlbe, 1, victim);
+
+	return victim;
+}
+
+/* Invalidate all guest kernel mappings when enter usermode,
+ * so that when they fault back in they will get the
+ * proper permission bits. */
+void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode)
+{
+	if (usermode) {
+		struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+		int i;
+
+		/* XXX Replace loop with fancy data structures. */
+		/* needn't set modified since tlbia will make TLB1 coherent */
+		for (i = 0; i < tlb1_max_shadow_size(); i++)
+			kvmppc_e500_stlbe_invalidate(vcpu_e500, 1, i);
+
+		_tlbia();
+	}
+}
+
+static int kvmppc_e500_gtlbe_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
+		int tlbsel, int esel)
+{
+	struct tlbe *gtlbe = &vcpu_e500->guest_tlb[tlbsel][esel];
+
+	if (unlikely(get_tlb_iprot(gtlbe)))
+		return -1;
+
+	if (tlbsel == 1) {
+		kvmppc_e500_tlb1_invalidate(vcpu_e500, get_tlb_eaddr(gtlbe),
+				get_tlb_end(gtlbe),
+				get_tlb_tid(gtlbe));
+	} else {
+		kvmppc_e500_stlbe_invalidate(vcpu_e500, tlbsel, esel);
+	}
+
+	gtlbe->mas1 = 0;
+
+	return 0;
+}
+
+int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *vcpu, int ra, int rb)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	unsigned int ia;
+	int esel, tlbsel;
+	gva_t ea;
+
+	ea = ((ra) ? vcpu->arch.gpr[ra] : 0) + vcpu->arch.gpr[rb];
+
+	ia = (ea >> 2) & 0x1;
+
+	/* since we only have tow TLBs, only lower bit is used. */
+	tlbsel = (ea >> 3) & 0x1;
+
+	if (ia) {
+		/* invalidate all entries */
+		for (esel = 0; esel < vcpu_e500->guest_tlb_size[tlbsel]; esel++)
+			kvmppc_e500_gtlbe_invalidate(vcpu_e500, tlbsel, esel);
+	} else {
+		ea &= 0xfffff000;
+		esel = kvmppc_e500_tlb_index(vcpu_e500, ea, tlbsel,
+				get_cur_pid(vcpu), -1);
+		if (esel >= 0)
+			kvmppc_e500_gtlbe_invalidate(vcpu_e500, tlbsel, esel);
+	}
+
+	_tlbia();
+
+	return EMULATE_DONE;
+}
+
+int kvmppc_e500_emul_tlbre(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int tlbsel, esel;
+	struct tlbe *gtlbe;
+
+	tlbsel = get_tlb_tlbsel(vcpu_e500);
+	esel = get_tlb_esel(vcpu_e500, tlbsel);
+
+	gtlbe = &vcpu_e500->guest_tlb[tlbsel][esel];
+	vcpu_e500->mas0 &= MAS0_NV(0);
+	vcpu_e500->mas0 |= MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
+	vcpu_e500->mas1 = gtlbe->mas1;
+	vcpu_e500->mas2 = gtlbe->mas2;
+	vcpu_e500->mas3 = gtlbe->mas3;
+	vcpu_e500->mas7 = gtlbe->mas7;
+
+	return EMULATE_DONE;
+}
+
+int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int as = !!get_cur_sas(vcpu_e500);
+	unsigned int pid = get_cur_spid(vcpu_e500);
+	int esel, tlbsel;
+	struct tlbe *gtlbe = NULL;
+	gva_t ea;
+
+	ea = vcpu->arch.gpr[rb];
+
+	for (tlbsel = 0; tlbsel < 2; tlbsel++) {
+		esel = kvmppc_e500_tlb_index(vcpu_e500, ea, tlbsel, pid, as);
+		if (esel >= 0) {
+			gtlbe = &vcpu_e500->guest_tlb[tlbsel][esel];
+			break;
+		}
+	}
+
+	if (gtlbe) {
+		vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(esel)
+			| MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
+		vcpu_e500->mas1 = gtlbe->mas1;
+		vcpu_e500->mas2 = gtlbe->mas2;
+		vcpu_e500->mas3 = gtlbe->mas3;
+		vcpu_e500->mas7 = gtlbe->mas7;
+	} else {
+		int victim;
+
+		/* since we only have tow TLBs, only lower bit is used. */
+		tlbsel = vcpu_e500->mas4 >> 28 & 0x1;
+		victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
+
+		vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(victim)
+			| MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
+		vcpu_e500->mas1 = (vcpu_e500->mas6 & MAS6_SPID0)
+			| (vcpu_e500->mas6 & (MAS6_SAS ? MAS1_TS : 0))
+			| (vcpu_e500->mas4 & MAS4_TSIZED(~0));
+		vcpu_e500->mas2 &= MAS2_EPN;
+		vcpu_e500->mas2 |= vcpu_e500->mas4 & MAS2_ATTRIB_MASK;
+		vcpu_e500->mas3 &= MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3;
+		vcpu_e500->mas7 = 0;
+	}
+
+	return EMULATE_DONE;
+}
+
+int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	u64 eaddr;
+	u64 raddr;
+	u32 tid;
+	struct tlbe *gtlbe;
+	int tlbsel, esel, stlbsel, sesel;
+
+	tlbsel = get_tlb_tlbsel(vcpu_e500);
+	esel = get_tlb_esel(vcpu_e500, tlbsel);
+
+	gtlbe = &vcpu_e500->guest_tlb[tlbsel][esel];
+
+	if (get_tlb_v(gtlbe) && tlbsel == 1) {
+		eaddr = get_tlb_eaddr(gtlbe);
+		tid = get_tlb_tid(gtlbe);
+		kvmppc_e500_tlb1_invalidate(vcpu_e500, eaddr,
+				get_tlb_end(gtlbe), tid);
+	}
+
+	gtlbe->mas1 = vcpu_e500->mas1;
+	gtlbe->mas2 = vcpu_e500->mas2;
+	gtlbe->mas3 = vcpu_e500->mas3;
+	gtlbe->mas7 = vcpu_e500->mas7;
+
+	KVMTRACE_5D(GTLB_WRITE, vcpu, vcpu_e500->mas0,
+			gtlbe->mas1, gtlbe->mas2, gtlbe->mas3, gtlbe->mas7,
+			handler);
+
+	/* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */
+	if (tlbe_is_host_safe(vcpu, gtlbe)) {
+		switch (tlbsel) {
+		case 0:
+			/* TLB0 */
+			gtlbe->mas1 &= ~MAS1_TSIZE(~0);
+			gtlbe->mas1 |= MAS1_TSIZE(BOOKE_PAGESZ_4K);
+
+			stlbsel = 0;
+			sesel = kvmppc_e500_stlbe_map(vcpu_e500, 0, esel);
+
+			break;
+
+		case 1:
+			/* TLB1 */
+			eaddr = get_tlb_eaddr(gtlbe);
+			raddr = get_tlb_raddr(gtlbe);
+
+			/* Create a 4KB mapping on the host.
+			 * If the guest wanted a large page,
+			 * only the first 4KB is mapped here and the rest
+			 * are mapped on the fly. */
+			stlbsel = 1;
+			sesel = kvmppc_e500_tlb1_map(vcpu_e500, eaddr,
+					raddr >> PAGE_SHIFT, gtlbe);
+			break;
+
+		default:
+			BUG();
+		}
+		write_host_tlbe(vcpu_e500, stlbsel, sesel);
+	}
+
+	return EMULATE_DONE;
+}
+
+int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
+{
+	unsigned int as = !!(vcpu->arch.msr & MSR_IS);
+
+	return kvmppc_e500_tlb_search(vcpu, eaddr, get_cur_pid(vcpu), as);
+}
+
+int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
+{
+	unsigned int as = !!(vcpu->arch.msr & MSR_DS);
+
+	return kvmppc_e500_tlb_search(vcpu, eaddr, get_cur_pid(vcpu), as);
+}
+
+void kvmppc_mmu_itlb_miss(struct kvm_vcpu *vcpu)
+{
+	unsigned int as = !!(vcpu->arch.msr & MSR_IS);
+
+	kvmppc_e500_deliver_tlb_miss(vcpu, vcpu->arch.pc, as);
+}
+
+void kvmppc_mmu_dtlb_miss(struct kvm_vcpu *vcpu)
+{
+	unsigned int as = !!(vcpu->arch.msr & MSR_DS);
+
+	kvmppc_e500_deliver_tlb_miss(vcpu, vcpu->arch.fault_dear, as);
+}
+
+gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int index,
+			gva_t eaddr)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	struct tlbe *gtlbe =
+		&vcpu_e500->guest_tlb[tlbsel_of(index)][esel_of(index)];
+	u64 pgmask = get_tlb_bytes(gtlbe) - 1;
+
+	return get_tlb_raddr(gtlbe) | (eaddr & pgmask);
+}
+
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int tlbsel, i;
+
+	for (tlbsel = 0; tlbsel < 2; tlbsel++)
+		for (i = 0; i < vcpu_e500->guest_tlb_size[tlbsel]; i++)
+			kvmppc_e500_shadow_release(vcpu_e500, tlbsel, i);
+
+	/* discard all guest mapping */
+	_tlbia();
+}
+
+void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 eaddr, gpa_t gpaddr,
+			unsigned int index)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int tlbsel = tlbsel_of(index);
+	int esel = esel_of(index);
+	int stlbsel, sesel;
+
+	switch (tlbsel) {
+	case 0:
+		stlbsel = 0;
+		sesel = esel;
+		break;
+
+	case 1: {
+		gfn_t gfn = gpaddr >> PAGE_SHIFT;
+		struct tlbe *gtlbe
+			= &vcpu_e500->guest_tlb[tlbsel][esel];
+
+		stlbsel = 1;
+		sesel = kvmppc_e500_tlb1_map(vcpu_e500, eaddr, gfn, gtlbe);
+		break;
+	}
+
+	default:
+		BUG();
+		break;
+	}
+	write_host_tlbe(vcpu_e500, stlbsel, sesel);
+}
+
+int kvmppc_e500_tlb_search(struct kvm_vcpu *vcpu,
+				gva_t eaddr, unsigned int pid, int as)
+{
+	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
+	int esel, tlbsel;
+
+	for (tlbsel = 0; tlbsel < 2; tlbsel++) {
+		esel = kvmppc_e500_tlb_index(vcpu_e500, eaddr, tlbsel, pid, as);
+		if (esel >= 0)
+			return index_of(tlbsel, esel);
+	}
+
+	return -1;
+}
+
+void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	struct tlbe *tlbe;
+
+	/* Insert large initial mapping for guest. */
+	tlbe = &vcpu_e500->guest_tlb[1][0];
+	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_256M);
+	tlbe->mas2 = 0;
+	tlbe->mas3 = E500_TLB_SUPER_PERM_MASK;
+	tlbe->mas7 = 0;
+
+	/* 4K map for serial output. Used by kernel wrapper. */
+	tlbe = &vcpu_e500->guest_tlb[1][1];
+	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+	tlbe->mas2 = (0xe0004500 & 0xFFFFF000) | MAS2_I | MAS2_G;
+	tlbe->mas3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK;
+	tlbe->mas7 = 0;
+}
+
+int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	tlb1_entry_num = mfspr(SPRN_TLB1CFG) & 0xFFF;
+
+	vcpu_e500->guest_tlb_size[0] = KVM_E500_TLB0_SIZE;
+	vcpu_e500->guest_tlb[0] =
+		kzalloc(sizeof(struct tlbe) * KVM_E500_TLB0_SIZE, GFP_KERNEL);
+	if (vcpu_e500->guest_tlb[0] == NULL)
+		goto err_out;
+
+	vcpu_e500->shadow_tlb_size[0] = KVM_E500_TLB0_SIZE;
+	vcpu_e500->shadow_tlb[0] =
+		kzalloc(sizeof(struct tlbe) * KVM_E500_TLB0_SIZE, GFP_KERNEL);
+	if (vcpu_e500->shadow_tlb[0] == NULL)
+		goto err_out_guest0;
+
+	vcpu_e500->guest_tlb_size[1] = KVM_E500_TLB1_SIZE;
+	vcpu_e500->guest_tlb[1] =
+		kzalloc(sizeof(struct tlbe) * KVM_E500_TLB1_SIZE, GFP_KERNEL);
+	if (vcpu_e500->guest_tlb[1] == NULL)
+		goto err_out_shadow0;
+
+	vcpu_e500->shadow_tlb_size[1] = tlb1_entry_num;
+	vcpu_e500->shadow_tlb[1] =
+		kzalloc(sizeof(struct tlbe) * tlb1_entry_num, GFP_KERNEL);
+	if (vcpu_e500->shadow_tlb[1] == NULL)
+		goto err_out_guest1;
+
+	vcpu_e500->shadow_pages[0] = (struct page **)
+		kzalloc(sizeof(struct page *) * KVM_E500_TLB0_SIZE, GFP_KERNEL);
+	if (vcpu_e500->shadow_pages[0] == NULL)
+		goto err_out_shadow1;
+
+	vcpu_e500->shadow_pages[1] = (struct page **)
+		kzalloc(sizeof(struct page *) * tlb1_entry_num, GFP_KERNEL);
+	if (vcpu_e500->shadow_pages[1] == NULL)
+		goto err_out_page0;
+
+	return 0;
+
+err_out_page0:
+	kfree(vcpu_e500->shadow_pages[0]);
+err_out_shadow1:
+	kfree(vcpu_e500->shadow_tlb[1]);
+err_out_guest1:
+	kfree(vcpu_e500->guest_tlb[1]);
+err_out_shadow0:
+	kfree(vcpu_e500->shadow_tlb[0]);
+err_out_guest0:
+	kfree(vcpu_e500->guest_tlb[0]);
+err_out:
+	return -1;
+}
+
+void kvmppc_e500_tlb_uninit(struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	kfree(vcpu_e500->shadow_pages[1]);
+	kfree(vcpu_e500->shadow_pages[0]);
+	kfree(vcpu_e500->shadow_tlb[1]);
+	kfree(vcpu_e500->guest_tlb[1]);
+	kfree(vcpu_e500->shadow_tlb[0]);
+	kfree(vcpu_e500->guest_tlb[0]);
+}
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
new file mode 100644
index 00000000000..d8833f95516
--- /dev/null
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Yu Liu, yu.liu@freescale.com
+ *
+ * Description:
+ * This file is based on arch/powerpc/kvm/44x_tlb.h,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __KVM_E500_TLB_H__
+#define __KVM_E500_TLB_H__
+
+#include <linux/kvm_host.h>
+#include <asm/mmu-fsl-booke.h>
+#include <asm/tlb.h>
+#include <asm/kvm_e500.h>
+
+#define KVM_E500_TLB0_WAY_SIZE_BIT	7	/* Fixed */
+#define KVM_E500_TLB0_WAY_SIZE		(1UL << KVM_E500_TLB0_WAY_SIZE_BIT)
+#define KVM_E500_TLB0_WAY_SIZE_MASK	(KVM_E500_TLB0_WAY_SIZE - 1)
+
+#define KVM_E500_TLB0_WAY_NUM_BIT	1	/* No greater than 7 */
+#define KVM_E500_TLB0_WAY_NUM		(1UL << KVM_E500_TLB0_WAY_NUM_BIT)
+#define KVM_E500_TLB0_WAY_NUM_MASK	(KVM_E500_TLB0_WAY_NUM - 1)
+
+#define KVM_E500_TLB0_SIZE  (KVM_E500_TLB0_WAY_SIZE * KVM_E500_TLB0_WAY_NUM)
+#define KVM_E500_TLB1_SIZE  16
+
+#define index_of(tlbsel, esel)	(((tlbsel) << 16) | ((esel) & 0xFFFF))
+#define tlbsel_of(index)	((index) >> 16)
+#define esel_of(index)		((index) & 0xFFFF)
+
+#define E500_TLB_USER_PERM_MASK (MAS3_UX|MAS3_UR|MAS3_UW)
+#define E500_TLB_SUPER_PERM_MASK (MAS3_SX|MAS3_SR|MAS3_SW)
+#define MAS2_ATTRIB_MASK \
+	  (MAS2_X0 | MAS2_X1 | MAS2_W | MAS2_I | MAS2_M | MAS2_G | MAS2_E)
+#define MAS3_ATTRIB_MASK \
+	  (MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3 \
+	   | E500_TLB_USER_PERM_MASK | E500_TLB_SUPER_PERM_MASK)
+
+extern void kvmppc_dump_tlbs(struct kvm_vcpu *);
+extern int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *);
+extern int kvmppc_e500_emul_tlbre(struct kvm_vcpu *);
+extern int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *, int, int);
+extern int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *, int);
+extern int kvmppc_e500_tlb_search(struct kvm_vcpu *, gva_t, unsigned int, int);
+extern void kvmppc_e500_tlb_put(struct kvm_vcpu *);
+extern void kvmppc_e500_tlb_load(struct kvm_vcpu *, int);
+extern int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *);
+extern void kvmppc_e500_tlb_uninit(struct kvmppc_vcpu_e500 *);
+extern void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *);
+
+/* TLB helper functions */
+static inline unsigned int get_tlb_size(const struct tlbe *tlbe)
+{
+	return (tlbe->mas1 >> 8) & 0xf;
+}
+
+static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe)
+{
+	return tlbe->mas2 & 0xfffff000;
+}
+
+static inline u64 get_tlb_bytes(const struct tlbe *tlbe)
+{
+	unsigned int pgsize = get_tlb_size(tlbe);
+	return 1ULL << 10 << (pgsize << 1);
+}
+
+static inline gva_t get_tlb_end(const struct tlbe *tlbe)
+{
+	u64 bytes = get_tlb_bytes(tlbe);
+	return get_tlb_eaddr(tlbe) + bytes - 1;
+}
+
+static inline u64 get_tlb_raddr(const struct tlbe *tlbe)
+{
+	u64 rpn = tlbe->mas7;
+	return (rpn << 32) | (tlbe->mas3 & 0xfffff000);
+}
+
+static inline unsigned int get_tlb_tid(const struct tlbe *tlbe)
+{
+	return (tlbe->mas1 >> 16) & 0xff;
+}
+
+static inline unsigned int get_tlb_ts(const struct tlbe *tlbe)
+{
+	return (tlbe->mas1 >> 12) & 0x1;
+}
+
+static inline unsigned int get_tlb_v(const struct tlbe *tlbe)
+{
+	return (tlbe->mas1 >> 31) & 0x1;
+}
+
+static inline unsigned int get_tlb_iprot(const struct tlbe *tlbe)
+{
+	return (tlbe->mas1 >> 30) & 0x1;
+}
+
+static inline unsigned int get_cur_pid(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.pid & 0xff;
+}
+
+static inline unsigned int get_cur_spid(
+		const struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	return (vcpu_e500->mas6 >> 16) & 0xff;
+}
+
+static inline unsigned int get_cur_sas(
+		const struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	return vcpu_e500->mas6 & 0x1;
+}
+
+static inline unsigned int get_tlb_tlbsel(
+		const struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	/*
+	 * Manual says that tlbsel has 2 bits wide.
+	 * Since we only have tow TLBs, only lower bit is used.
+	 */
+	return (vcpu_e500->mas0 >> 28) & 0x1;
+}
+
+static inline unsigned int get_tlb_nv_bit(
+		const struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	return vcpu_e500->mas0 & 0xfff;
+}
+
+static inline unsigned int get_tlb_esel_bit(
+		const struct kvmppc_vcpu_e500 *vcpu_e500)
+{
+	return (vcpu_e500->mas0 >> 16) & 0xfff;
+}
+
+static inline unsigned int get_tlb_esel(
+		const struct kvmppc_vcpu_e500 *vcpu_e500,
+		int tlbsel)
+{
+	unsigned int esel = get_tlb_esel_bit(vcpu_e500);
+
+	if (tlbsel == 0) {
+		esel &= KVM_E500_TLB0_WAY_NUM_MASK;
+		esel |= ((vcpu_e500->mas2 >> 12) & KVM_E500_TLB0_WAY_SIZE_MASK)
+				<< KVM_E500_TLB0_WAY_NUM_BIT;
+	} else {
+		esel &= KVM_E500_TLB1_SIZE - 1;
+	}
+
+	return esel;
+}
+
+static inline int tlbe_is_host_safe(const struct kvm_vcpu *vcpu,
+			const struct tlbe *tlbe)
+{
+	gpa_t gpa;
+
+	if (!get_tlb_v(tlbe))
+		return 0;
+
+	/* Does it match current guest AS? */
+	/* XXX what about IS != DS? */
+	if (get_tlb_ts(tlbe) != !!(vcpu->arch.msr & MSR_IS))
+		return 0;
+
+	gpa = get_tlb_raddr(tlbe);
+	if (!gfn_to_memslot(vcpu->kvm, gpa >> PAGE_SHIFT))
+		/* Mapping is not for RAM. */
+		return 0;
+
+	return 1;
+}
+
+#endif /* __KVM_E500_TLB_H__ */
-- 
cgit v1.2.3


From b52a638c391c5c7b013180f5374274698b8535c8 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:11 -0600
Subject: KVM: ppc: Add kvmppc_mmu_dtlb/itlb_miss for booke

When itlb or dtlb miss happens, E500 needs to update some mmu registers.
So that the auto-load mechanism can work on E500 when write a tlb entry.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_ppc.h | 2 ++
 arch/powerpc/kvm/44x_tlb.c         | 8 ++++++++
 arch/powerpc/kvm/booke.c           | 2 ++
 3 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 5e80a20f32b..6052779dbb5 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -63,6 +63,8 @@ extern int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
                               gva_t eaddr);
+extern void kvmppc_mmu_dtlb_miss(struct kvm_vcpu *vcpu);
+extern void kvmppc_mmu_itlb_miss(struct kvm_vcpu *vcpu);
 
 extern struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm,
                                                 unsigned int id);
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index e67b7313ffc..4a16f472cc1 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -232,6 +232,14 @@ int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr)
 	return kvmppc_44x_tlb_index(vcpu, eaddr, vcpu->arch.pid, as);
 }
 
+void kvmppc_mmu_itlb_miss(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_mmu_dtlb_miss(struct kvm_vcpu *vcpu)
+{
+}
+
 static void kvmppc_44x_shadow_release(struct kvmppc_vcpu_44x *vcpu_44x,
                                       unsigned int stlb_index)
 {
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index a73b3959e41..933c406c791 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -295,6 +295,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_DTLB_MISS);
 			vcpu->arch.dear = vcpu->arch.fault_dear;
 			vcpu->arch.esr = vcpu->arch.fault_esr;
+			kvmppc_mmu_dtlb_miss(vcpu);
 			kvmppc_account_exit(vcpu, DTLB_REAL_MISS_EXITS);
 			r = RESUME_GUEST;
 			break;
@@ -337,6 +338,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		if (gtlb_index < 0) {
 			/* The guest didn't have a mapping for it. */
 			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_ITLB_MISS);
+			kvmppc_mmu_itlb_miss(vcpu);
 			kvmppc_account_exit(vcpu, ITLB_REAL_MISS_EXITS);
 			break;
 		}
-- 
cgit v1.2.3


From bdc89f13ec955c14777d5caf02dfca3f51d639bd Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:12 -0600
Subject: KVM: ppc: distinguish between interrupts and priorities

Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/booke.c | 2 +-
 arch/powerpc/kvm/booke.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 933c406c791..f192fbee2f2 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -163,7 +163,7 @@ void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu)
 	unsigned int priority;
 
 	priority = __ffs(*pending);
-	while (priority <= BOOKE_MAX_INTERRUPT) {
+	while (priority <= BOOKE_IRQPRIO_MAX) {
 		if (kvmppc_booke_irqprio_deliver(vcpu, priority))
 			break;
 
diff --git a/arch/powerpc/kvm/booke.h b/arch/powerpc/kvm/booke.h
index 311fdbc23fb..7ceeb3e739b 100644
--- a/arch/powerpc/kvm/booke.h
+++ b/arch/powerpc/kvm/booke.h
@@ -42,6 +42,7 @@
 #define BOOKE_IRQPRIO_EXTERNAL 13
 #define BOOKE_IRQPRIO_FIT 14
 #define BOOKE_IRQPRIO_DECREMENTER 15
+#define BOOKE_IRQPRIO_MAX 15
 
 /* Helper function for "full" MSR writes. No need to call this if only EE is
  * changing. */
-- 
cgit v1.2.3


From bb3a8a178dec1e46df3138a30f76acf67fe12397 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sat, 3 Jan 2009 16:23:13 -0600
Subject: KVM: ppc: Add extra E500 exceptions

e500 has additional interrupt vectors (and corresponding IVORs) for SPE and
performance monitoring interrupts.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_asm.h  |  7 ++++++-
 arch/powerpc/include/asm/kvm_host.h |  2 +-
 arch/powerpc/kvm/booke.c            | 18 ++++++++++++++++++
 arch/powerpc/kvm/booke.h            | 30 ++++++++++++++++++------------
 arch/powerpc/kvm/booke_interrupts.S |  3 +++
 arch/powerpc/kvm/e500.c             | 20 +++++++++++++++++++-
 arch/powerpc/kvm/e500_emulate.c     | 27 +++++++++++++++++++++++++++
 7 files changed, 92 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 2197764796d..56bfae59837 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -42,7 +42,12 @@
 #define BOOKE_INTERRUPT_DTLB_MISS 13
 #define BOOKE_INTERRUPT_ITLB_MISS 14
 #define BOOKE_INTERRUPT_DEBUG 15
-#define BOOKE_MAX_INTERRUPT 15
+
+/* E500 */
+#define BOOKE_INTERRUPT_SPE_UNAVAIL 32
+#define BOOKE_INTERRUPT_SPE_FP_DATA 33
+#define BOOKE_INTERRUPT_SPE_FP_ROUND 34
+#define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35
 
 #define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 50e5ce1b400..1c618769752 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -150,7 +150,7 @@ struct kvm_vcpu_arch {
 	u32 tbu;
 	u32 tcr;
 	u32 tsr;
-	u32 ivor[16];
+	u32 ivor[64];
 	ulong ivpr;
 	u32 pir;
 
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index f192fbee2f2..642e4204cf2 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -118,6 +118,9 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
 	case BOOKE_IRQPRIO_DATA_STORAGE:
 	case BOOKE_IRQPRIO_INST_STORAGE:
 	case BOOKE_IRQPRIO_FP_UNAVAIL:
+	case BOOKE_IRQPRIO_SPE_UNAVAIL:
+	case BOOKE_IRQPRIO_SPE_FP_DATA:
+	case BOOKE_IRQPRIO_SPE_FP_ROUND:
 	case BOOKE_IRQPRIO_AP_UNAVAIL:
 	case BOOKE_IRQPRIO_ALIGNMENT:
 		allowed = 1;
@@ -261,6 +264,21 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		r = RESUME_GUEST;
 		break;
 
+	case BOOKE_INTERRUPT_SPE_UNAVAIL:
+		kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_SPE_UNAVAIL);
+		r = RESUME_GUEST;
+		break;
+
+	case BOOKE_INTERRUPT_SPE_FP_DATA:
+		kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_SPE_FP_DATA);
+		r = RESUME_GUEST;
+		break;
+
+	case BOOKE_INTERRUPT_SPE_FP_ROUND:
+		kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_SPE_FP_ROUND);
+		r = RESUME_GUEST;
+		break;
+
 	case BOOKE_INTERRUPT_DATA_STORAGE:
 		vcpu->arch.dear = vcpu->arch.fault_dear;
 		vcpu->arch.esr = vcpu->arch.fault_esr;
diff --git a/arch/powerpc/kvm/booke.h b/arch/powerpc/kvm/booke.h
index 7ceeb3e739b..d59bcca1f9d 100644
--- a/arch/powerpc/kvm/booke.h
+++ b/arch/powerpc/kvm/booke.h
@@ -31,18 +31,24 @@
 #define BOOKE_IRQPRIO_ALIGNMENT 2
 #define BOOKE_IRQPRIO_PROGRAM 3
 #define BOOKE_IRQPRIO_FP_UNAVAIL 4
-#define BOOKE_IRQPRIO_SYSCALL 5
-#define BOOKE_IRQPRIO_AP_UNAVAIL 6
-#define BOOKE_IRQPRIO_DTLB_MISS 7
-#define BOOKE_IRQPRIO_ITLB_MISS 8
-#define BOOKE_IRQPRIO_MACHINE_CHECK 9
-#define BOOKE_IRQPRIO_DEBUG 10
-#define BOOKE_IRQPRIO_CRITICAL 11
-#define BOOKE_IRQPRIO_WATCHDOG 12
-#define BOOKE_IRQPRIO_EXTERNAL 13
-#define BOOKE_IRQPRIO_FIT 14
-#define BOOKE_IRQPRIO_DECREMENTER 15
-#define BOOKE_IRQPRIO_MAX 15
+#define BOOKE_IRQPRIO_SPE_UNAVAIL 5
+#define BOOKE_IRQPRIO_SPE_FP_DATA 6
+#define BOOKE_IRQPRIO_SPE_FP_ROUND 7
+#define BOOKE_IRQPRIO_SYSCALL 8
+#define BOOKE_IRQPRIO_AP_UNAVAIL 9
+#define BOOKE_IRQPRIO_DTLB_MISS 10
+#define BOOKE_IRQPRIO_ITLB_MISS 11
+#define BOOKE_IRQPRIO_MACHINE_CHECK 12
+#define BOOKE_IRQPRIO_DEBUG 13
+#define BOOKE_IRQPRIO_CRITICAL 14
+#define BOOKE_IRQPRIO_WATCHDOG 15
+#define BOOKE_IRQPRIO_EXTERNAL 16
+#define BOOKE_IRQPRIO_FIT 17
+#define BOOKE_IRQPRIO_DECREMENTER 18
+#define BOOKE_IRQPRIO_PERFORMANCE_MONITOR 19
+#define BOOKE_IRQPRIO_MAX 19
+
+extern unsigned long kvmppc_booke_handlers;
 
 /* Helper function for "full" MSR writes. No need to call this if only EE is
  * changing. */
diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index 4679ec287e6..d0c6f841bbd 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -86,6 +86,9 @@ KVM_HANDLER BOOKE_INTERRUPT_WATCHDOG
 KVM_HANDLER BOOKE_INTERRUPT_DTLB_MISS
 KVM_HANDLER BOOKE_INTERRUPT_ITLB_MISS
 KVM_HANDLER BOOKE_INTERRUPT_DEBUG
+KVM_HANDLER BOOKE_INTERRUPT_SPE_UNAVAIL
+KVM_HANDLER BOOKE_INTERRUPT_SPE_FP_DATA
+KVM_HANDLER BOOKE_INTERRUPT_SPE_FP_ROUND
 
 _GLOBAL(kvmppc_handler_len)
 	.long kvmppc_handler_1 - kvmppc_handler_0
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 7992da497cd..d8067fd81cd 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -21,6 +21,7 @@
 #include <asm/kvm_e500.h>
 #include <asm/kvm_ppc.h>
 
+#include "booke.h"
 #include "e500_tlb.h"
 
 void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
@@ -133,12 +134,29 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 
 static int kvmppc_e500_init(void)
 {
-	int r;
+	int r, i;
+	unsigned long ivor[3];
+	unsigned long max_ivor = 0;
 
 	r = kvmppc_booke_init();
 	if (r)
 		return r;
 
+	/* copy extra E500 exception handlers */
+	ivor[0] = mfspr(SPRN_IVOR32);
+	ivor[1] = mfspr(SPRN_IVOR33);
+	ivor[2] = mfspr(SPRN_IVOR34);
+	for (i = 0; i < 3; i++) {
+		if (ivor[i] > max_ivor)
+			max_ivor = ivor[i];
+
+		memcpy((void *)kvmppc_booke_handlers + ivor[i],
+		       kvmppc_handlers_start + (i + 16) * kvmppc_handler_len,
+		       kvmppc_handler_len);
+	}
+	flush_icache_range(kvmppc_booke_handlers,
+			kvmppc_booke_handlers + max_ivor + kvmppc_handler_len);
+
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
 }
 
diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index a47f44cd2cf..d3c0c7c7f20 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -107,6 +107,20 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 	case SPRN_HID1:
 		vcpu_e500->hid1 = vcpu->arch.gpr[rs]; break;
 
+	/* extra exceptions */
+	case SPRN_IVOR32:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR33:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_DATA] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR34:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_ROUND] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IVOR35:
+		vcpu->arch.ivor[BOOKE_IRQPRIO_PERFORMANCE_MONITOR] = vcpu->arch.gpr[rs];
+		break;
+
 	default:
 		emulated = kvmppc_booke_emulate_mtspr(vcpu, sprn, rs);
 	}
@@ -160,6 +174,19 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	case SPRN_HID1:
 		vcpu->arch.gpr[rt] = vcpu_e500->hid1; break;
 
+	/* extra exceptions */
+	case SPRN_IVOR32:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL];
+		break;
+	case SPRN_IVOR33:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_DATA];
+		break;
+	case SPRN_IVOR34:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_ROUND];
+		break;
+	case SPRN_IVOR35:
+		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_PERFORMANCE_MONITOR];
+		break;
 	default:
 		emulated = kvmppc_booke_emulate_mfspr(vcpu, sprn, rt);
 	}
-- 
cgit v1.2.3


From 1872a3f411ffe95c8e92300e0986a3532db55ce9 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 4 Jan 2009 23:26:52 +0200
Subject: KVM: VMX: Fix guest state validity checks

The vmx guest state validity checks are full of bugs.  Make them
conform to the manual.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 3312047664a..be9441056ff 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1784,14 +1784,16 @@ static bool code_segment_valid(struct kvm_vcpu *vcpu)
 	vmx_get_segment(vcpu, &cs, VCPU_SREG_CS);
 	cs_rpl = cs.selector & SELECTOR_RPL_MASK;
 
+	if (cs.unusable)
+		return false;
 	if (~cs.type & (AR_TYPE_CODE_MASK|AR_TYPE_ACCESSES_MASK))
 		return false;
 	if (!cs.s)
 		return false;
-	if (!(~cs.type & (AR_TYPE_CODE_MASK|AR_TYPE_WRITEABLE_MASK))) {
+	if (cs.type & AR_TYPE_WRITEABLE_MASK) {
 		if (cs.dpl > cs_rpl)
 			return false;
-	} else if (cs.type & AR_TYPE_CODE_MASK) {
+	} else {
 		if (cs.dpl != cs_rpl)
 			return false;
 	}
@@ -1810,7 +1812,9 @@ static bool stack_segment_valid(struct kvm_vcpu *vcpu)
 	vmx_get_segment(vcpu, &ss, VCPU_SREG_SS);
 	ss_rpl = ss.selector & SELECTOR_RPL_MASK;
 
-	if ((ss.type != 3) || (ss.type != 7))
+	if (ss.unusable)
+		return true;
+	if (ss.type != 3 && ss.type != 7)
 		return false;
 	if (!ss.s)
 		return false;
@@ -1830,6 +1834,8 @@ static bool data_segment_valid(struct kvm_vcpu *vcpu, int seg)
 	vmx_get_segment(vcpu, &var, seg);
 	rpl = var.selector & SELECTOR_RPL_MASK;
 
+	if (var.unusable)
+		return true;
 	if (!var.s)
 		return false;
 	if (!var.present)
@@ -1851,9 +1857,11 @@ static bool tr_valid(struct kvm_vcpu *vcpu)
 
 	vmx_get_segment(vcpu, &tr, VCPU_SREG_TR);
 
+	if (tr.unusable)
+		return false;
 	if (tr.selector & SELECTOR_TI_MASK)	/* TI = 1 */
 		return false;
-	if ((tr.type != 3) || (tr.type != 11)) /* TODO: Check if guest is in IA32e mode */
+	if (tr.type != 3 && tr.type != 11) /* TODO: Check if guest is in IA32e mode */
 		return false;
 	if (!tr.present)
 		return false;
@@ -1867,6 +1875,8 @@ static bool ldtr_valid(struct kvm_vcpu *vcpu)
 
 	vmx_get_segment(vcpu, &ldtr, VCPU_SREG_LDTR);
 
+	if (ldtr.unusable)
+		return true;
 	if (ldtr.selector & SELECTOR_TI_MASK)	/* TI = 1 */
 		return false;
 	if (ldtr.type != 2)
-- 
cgit v1.2.3


From 9fd4a3b7a412f983696b23121413a79d2132fed6 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 4 Jan 2009 23:43:42 +0200
Subject: KVM: VMX: don't clobber segment AR if emulating invalid state

The ususable bit is important for determining state validity; don't
clobber it.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index be9441056ff..a6598cbaa00 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1649,7 +1649,7 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
 	var->limit = vmcs_read32(sf->limit);
 	var->selector = vmcs_read16(sf->selector);
 	ar = vmcs_read32(sf->ar_bytes);
-	if (ar & AR_UNUSABLE_MASK)
+	if ((ar & AR_UNUSABLE_MASK) && !emulate_invalid_guest_state)
 		ar = 0;
 	var->type = ar & 15;
 	var->s = (ar >> 4) & 1;
-- 
cgit v1.2.3


From 10f32d84c750ccf8c0afb3a4ea9d4059aa3e9ffc Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 5 Jan 2009 00:53:19 +0200
Subject: KVM: VMX: Prevent exit handler from running if emulating due to
 invalid state

If we've just emulated an instruction, we won't have any valid exit
reason and associated information.

Fix by moving the clearing of the emulation_required flag to the exit handler.
This way the exit handler can notice that we've been emulating and abort
early.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index a6598cbaa00..a309be6788e 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3130,7 +3130,6 @@ static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 				struct kvm_run *kvm_run)
 {
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	int err;
 
 	preempt_enable();
@@ -3155,11 +3154,6 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 
 	local_irq_disable();
 	preempt_disable();
-
-	/* Guest state should be valid now except if we need to
-	 * emulate an MMIO */
-	if (guest_state_valid(vcpu))
-		vmx->emulation_required = 0;
 }
 
 /*
@@ -3208,8 +3202,11 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	/* If we need to emulate an MMIO from handle_invalid_guest_state
 	 * we just return 0 */
-	if (vmx->emulation_required && emulate_invalid_guest_state)
+	if (vmx->emulation_required && emulate_invalid_guest_state) {
+		if (guest_state_valid(vcpu))
+			vmx->emulation_required = 0;
 		return 0;
+	}
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
-- 
cgit v1.2.3


From 350f69dcd169d536307aa4a8c38c480e3a51c0db Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 5 Jan 2009 11:12:40 +0200
Subject: KVM: x86 emulator: Make emulate_pop() a little more generic

Allow emulate_pop() to read into arbitrary memory rather than just the
source operand.  Needed for complicated instructions like far returns.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 54fb09889a8..94459f313f1 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1136,18 +1136,19 @@ static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
 }
 
 static int emulate_pop(struct x86_emulate_ctxt *ctxt,
-		       struct x86_emulate_ops *ops)
+		       struct x86_emulate_ops *ops,
+		       void *dest, int len)
 {
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
 	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
 						 c->regs[VCPU_REGS_RSP]),
-				&c->src.val, c->src.bytes, ctxt->vcpu);
+				dest, len, ctxt->vcpu);
 	if (rc != 0)
 		return rc;
 
-	register_address_increment(c, &c->regs[VCPU_REGS_RSP], c->src.bytes);
+	register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
 	return rc;
 }
 
@@ -1157,11 +1158,9 @@ static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
-	c->src.bytes = c->dst.bytes;
-	rc = emulate_pop(ctxt, ops);
+	rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
 	if (rc != 0)
 		return rc;
-	c->dst.val = c->src.val;
 	return 0;
 }
 
@@ -1467,11 +1466,9 @@ special_insn:
 		break;
 	case 0x58 ... 0x5f: /* pop reg */
 	pop_instruction:
-		c->src.bytes = c->op_bytes;
-		rc = emulate_pop(ctxt, ops);
+		rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
 		if (rc != 0)
 			goto done;
-		c->dst.val = c->src.val;
 		break;
 	case 0x63:		/* movsxd */
 		if (ctxt->mode != X86EMUL_MODE_PROT64)
-- 
cgit v1.2.3


From 8b3079a5c0c031de07c8390aa160a4229088274f Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 5 Jan 2009 12:10:54 +0200
Subject: KVM: VMX: When emulating on invalid vmx state, don't return to
 userspace unnecessarily

If we aren't doing mmio there's no need to exit to userspace (which will
just be confused).

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index a309be6788e..df454de8acf 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -91,6 +91,7 @@ struct vcpu_vmx {
 	} rmode;
 	int vpid;
 	bool emulation_required;
+	enum emulation_result invalid_state_emulation_result;
 
 	/* Support for vnmi-less CPUs */
 	int soft_vnmi_blocked;
@@ -3130,7 +3131,8 @@ static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 				struct kvm_run *kvm_run)
 {
-	int err;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	enum emulation_result err = EMULATE_DONE;
 
 	preempt_enable();
 	local_irq_enable();
@@ -3154,6 +3156,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 
 	local_irq_disable();
 	preempt_disable();
+
+	vmx->invalid_state_emulation_result = err;
 }
 
 /*
@@ -3205,7 +3209,7 @@ static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	if (vmx->emulation_required && emulate_invalid_guest_state) {
 		if (guest_state_valid(vcpu))
 			vmx->emulation_required = 0;
-		return 0;
+		return vmx->invalid_state_emulation_result != EMULATE_DO_MMIO;
 	}
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
-- 
cgit v1.2.3


From a77ab5ead5c1fef2c6c5a9b3cf3765e52643a2aa Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 5 Jan 2009 13:27:34 +0200
Subject: KVM: x86 emulator: implement 'ret far' instruction (opcode 0xcb)

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 94459f313f1..ca91749d208 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -178,7 +178,7 @@ static u32 opcode_table[256] = {
 	0, ImplicitOps | Stack, 0, 0,
 	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
 	/* 0xC8 - 0xCF */
-	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, ImplicitOps | Stack, 0, 0, 0, 0,
 	/* 0xD0 - 0xD7 */
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
@@ -1278,6 +1278,25 @@ static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
 	return 0;
 }
 
+static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
+			   struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+	unsigned long cs;
+
+	rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
+	if (rc)
+		return rc;
+	if (c->op_bytes == 4)
+		c->eip = (u32)c->eip;
+	rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
+	if (rc)
+		return rc;
+	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
+	return rc;
+}
+
 static inline int writeback(struct x86_emulate_ctxt *ctxt,
 			    struct x86_emulate_ops *ops)
 {
@@ -1735,6 +1754,11 @@ special_insn:
 	mov:
 		c->dst.val = c->src.val;
 		break;
+	case 0xcb:		/* ret far */
+		rc = emulate_ret_far(ctxt, ops);
+		if (rc)
+			goto done;
+		break;
 	case 0xd0 ... 0xd1:	/* Grp2 */
 		c->src.val = 1;
 		emulate_grp2(ctxt);
-- 
cgit v1.2.3


From 269e05e48502f1cc06802e9fba90f5100dd6bb0d Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 5 Jan 2009 15:21:42 +0200
Subject: KVM: Properly lock PIT creation

Otherwise, two threads can create a PIT in parallel and cause a memory leak.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 2 --
 arch/x86/kvm/x86.c   | 6 ++++++
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 528daadeba4..69d1bbff3fd 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -548,9 +548,7 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 	if (!pit)
 		return NULL;
 
-	mutex_lock(&kvm->lock);
 	pit->irq_source_id = kvm_request_irq_source_id(kvm);
-	mutex_unlock(&kvm->lock);
 	if (pit->irq_source_id < 0) {
 		kfree(pit);
 		return NULL;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a1f14611f4b..6fbc3460337 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1837,10 +1837,16 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		break;
 	case KVM_CREATE_PIT:
+		mutex_lock(&kvm->lock);
+		r = -EEXIST;
+		if (kvm->arch.vpit)
+			goto create_pit_unlock;
 		r = -ENOMEM;
 		kvm->arch.vpit = kvm_create_pit(kvm);
 		if (kvm->arch.vpit)
 			r = 0;
+	create_pit_unlock:
+		mutex_unlock(&kvm->lock);
 		break;
 	case KVM_IRQ_LINE: {
 		struct kvm_irq_level irq_event;
-- 
cgit v1.2.3


From f5d0906b5bafd7faea553ed1cc92bd06755b66b9 Mon Sep 17 00:00:00 2001
From: Hollis Blanchard <hollisb@us.ibm.com>
Date: Sun, 4 Jan 2009 13:51:09 -0600
Subject: KVM: ppc: remove debug support broken by KVM debug rewrite

After the rewrite of KVM's debug support, this code doesn't even build any
more.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_host.h |  5 ---
 arch/powerpc/include/asm/kvm_ppc.h  |  3 --
 arch/powerpc/kvm/44x.c              | 66 -------------------------------------
 arch/powerpc/kvm/powerpc.c          | 27 ++-------------
 4 files changed, 2 insertions(+), 99 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 1c618769752..dfdf13c9fef 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -111,11 +111,6 @@ struct kvm_arch {
 struct kvm_vcpu_arch {
 	u32 host_stack;
 	u32 host_pid;
-	u32 host_dbcr0;
-	u32 host_dbcr1;
-	u32 host_dbcr2;
-	u32 host_iac[4];
-	u32 host_msr;
 
 	u64 fpr[32];
 	ulong gpr[32];
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 6052779dbb5..2c6ee349df5 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -77,9 +77,6 @@ extern int kvmppc_core_vcpu_translate(struct kvm_vcpu *vcpu,
 extern void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
 extern void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu);
 
-extern void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu);
-extern void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu);
-
 extern void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu);
 extern int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu);
diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index 8383603dd8a..0cef809cec2 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -28,72 +28,6 @@
 
 #include "44x_tlb.h"
 
-/* Note: clearing MSR[DE] just means that the debug interrupt will not be
- * delivered *immediately*. Instead, it simply sets the appropriate DBSR bits.
- * If those DBSR bits are still set when MSR[DE] is re-enabled, the interrupt
- * will be delivered as an "imprecise debug event" (which is indicated by
- * DBSR[IDE].
- */
-static void kvm44x_disable_debug_interrupts(void)
-{
-	mtmsr(mfmsr() & ~MSR_DE);
-}
-
-void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
-{
-	kvm44x_disable_debug_interrupts();
-
-	mtspr(SPRN_IAC1, vcpu->arch.host_iac[0]);
-	mtspr(SPRN_IAC2, vcpu->arch.host_iac[1]);
-	mtspr(SPRN_IAC3, vcpu->arch.host_iac[2]);
-	mtspr(SPRN_IAC4, vcpu->arch.host_iac[3]);
-	mtspr(SPRN_DBCR1, vcpu->arch.host_dbcr1);
-	mtspr(SPRN_DBCR2, vcpu->arch.host_dbcr2);
-	mtspr(SPRN_DBCR0, vcpu->arch.host_dbcr0);
-	mtmsr(vcpu->arch.host_msr);
-}
-
-void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
-{
-	struct kvm_guest_debug *dbg = &vcpu->guest_debug;
-	u32 dbcr0 = 0;
-
-	vcpu->arch.host_msr = mfmsr();
-	kvm44x_disable_debug_interrupts();
-
-	/* Save host debug register state. */
-	vcpu->arch.host_iac[0] = mfspr(SPRN_IAC1);
-	vcpu->arch.host_iac[1] = mfspr(SPRN_IAC2);
-	vcpu->arch.host_iac[2] = mfspr(SPRN_IAC3);
-	vcpu->arch.host_iac[3] = mfspr(SPRN_IAC4);
-	vcpu->arch.host_dbcr0 = mfspr(SPRN_DBCR0);
-	vcpu->arch.host_dbcr1 = mfspr(SPRN_DBCR1);
-	vcpu->arch.host_dbcr2 = mfspr(SPRN_DBCR2);
-
-	/* set registers up for guest */
-
-	if (dbg->bp[0]) {
-		mtspr(SPRN_IAC1, dbg->bp[0]);
-		dbcr0 |= DBCR0_IAC1 | DBCR0_IDM;
-	}
-	if (dbg->bp[1]) {
-		mtspr(SPRN_IAC2, dbg->bp[1]);
-		dbcr0 |= DBCR0_IAC2 | DBCR0_IDM;
-	}
-	if (dbg->bp[2]) {
-		mtspr(SPRN_IAC3, dbg->bp[2]);
-		dbcr0 |= DBCR0_IAC3 | DBCR0_IDM;
-	}
-	if (dbg->bp[3]) {
-		mtspr(SPRN_IAC4, dbg->bp[3]);
-		dbcr0 |= DBCR0_IAC4 | DBCR0_IDM;
-	}
-
-	mtspr(SPRN_DBCR0, dbcr0);
-	mtspr(SPRN_DBCR1, 0);
-	mtspr(SPRN_DBCR2, 0);
-}
-
 void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	kvmppc_44x_tlb_load(vcpu);
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index f30be9ef231..9057335fdc6 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -221,41 +221,18 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
-	if (vcpu->guest_debug.enabled)
-		kvmppc_core_load_guest_debugstate(vcpu);
-
 	kvmppc_core_vcpu_load(vcpu, cpu);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->guest_debug.enabled)
-		kvmppc_core_load_host_debugstate(vcpu);
-
-	/* Don't leave guest TLB entries resident when being de-scheduled. */
-	/* XXX It would be nice to differentiate between heavyweight exit and
-	 * sched_out here, since we could avoid the TLB flush for heavyweight
-	 * exits. */
-	_tlbil_all();
 	kvmppc_core_vcpu_put(vcpu);
 }
 
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
-					struct kvm_guest_debug *dbg)
+                                        struct kvm_guest_debug *dbg)
 {
-	int i;
-
-	vcpu->guest_debug.enabled = dbg->enabled;
-	if (vcpu->guest_debug.enabled) {
-		for (i=0; i < ARRAY_SIZE(vcpu->guest_debug.bp); i++) {
-			if (dbg->breakpoints[i].enabled)
-				vcpu->guest_debug.bp[i] = dbg->breakpoints[i].address;
-			else
-				vcpu->guest_debug.bp[i] = 0;
-		}
-	}
-
-	return 0;
+	return -EINVAL;
 }
 
 static void kvmppc_complete_dcr_load(struct kvm_vcpu *vcpu,
-- 
cgit v1.2.3


From c8a73f186bf62235b6fb5dd52601d641917dd50b Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 5 Jan 2009 16:02:47 +0100
Subject: KVM: SVM: Add microcode patch level dummy

VMware ESX checks if the microcode level is correct when using a barcelona
CPU, in order to see if it actually can use SVM. Let's tell it we're on the
safe side...

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b3a7a314d55..3a60c3f04e6 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1928,6 +1928,9 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	case MSR_VM_CR:
 		*data = 0;
 		break;
+	case MSR_IA32_UCODE_REV:
+		*data = 0x01000065;
+		break;
 	default:
 		return kvm_get_msr_common(vcpu, ecx, data);
 	}
-- 
cgit v1.2.3


From 4677a3b693e035f186e2875259b9a0bb94c42fbe Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 6 Jan 2009 13:00:27 +0200
Subject: KVM: MMU: Optimize page unshadowing

Using kvm_mmu_lookup_page() will result in multiple scans of the hash chains;
use hlist_for_each_entry_safe() to achieve a single scan instead.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 15850809b55..aac0499947d 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1471,11 +1471,20 @@ static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
 
 static void mmu_unshadow(struct kvm *kvm, gfn_t gfn)
 {
+	unsigned index;
+	struct hlist_head *bucket;
 	struct kvm_mmu_page *sp;
+	struct hlist_node *node, *nn;
 
-	while ((sp = kvm_mmu_lookup_page(kvm, gfn)) != NULL) {
-		pgprintk("%s: zap %lx %x\n", __func__, gfn, sp->role.word);
-		kvm_mmu_zap_page(kvm, sp);
+	index = kvm_page_table_hashfn(gfn);
+	bucket = &kvm->arch.mmu_page_hash[index];
+	hlist_for_each_entry_safe(sp, node, nn, bucket, hash_link) {
+		if (sp->gfn == gfn && !sp->role.metaphysical
+		    && !sp->role.invalid) {
+			pgprintk("%s: zap %lx %x\n",
+				 __func__, gfn, sp->role.word);
+			kvm_mmu_zap_page(kvm, sp);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From 5d9b8e30f543a9f21a968a4cda71e8f6d1c66a61 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 4 Jan 2009 18:04:18 +0200
Subject: KVM: Add CONFIG_HAVE_KVM_IRQCHIP

Two KVM archs support irqchips and two don't.  Add a Kconfig item to
make selecting between the two models easier.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/Kconfig    | 4 ++++
 arch/powerpc/kvm/Kconfig | 3 +++
 arch/s390/kvm/Kconfig    | 3 +++
 arch/x86/kvm/Kconfig     | 4 ++++
 4 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index f833a0b4188..0a2d6b86075 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -4,6 +4,10 @@
 config HAVE_KVM
 	bool
 
+config HAVE_KVM_IRQCHIP
+       bool
+       default y
+
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
 	depends on HAVE_KVM || IA64
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 14657055014..5a152a52796 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -2,6 +2,9 @@
 # KVM configuration
 #
 
+config HAVE_KVM_IRQCHIP
+       bool
+
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
 	---help---
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index e051cad1f1e..3e260b7e37b 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -4,6 +4,9 @@
 config HAVE_KVM
        bool
 
+config HAVE_KVM_IRQCHIP
+       bool
+
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
 	default y
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index b81125f0bde..0a303c3ed11 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -4,6 +4,10 @@
 config HAVE_KVM
        bool
 
+config HAVE_KVM_IRQCHIP
+       bool
+       default y
+
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
 	depends on HAVE_KVM || X86
-- 
cgit v1.2.3


From 4780c65904f0fc4e312ee2da9383eacbe04e61ea Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 4 Jan 2009 18:06:06 +0200
Subject: KVM: Reset PIT irq injection logic when the PIT IRQ is unmasked

While the PIT is masked the guest cannot ack the irq, so the reinject logic
will never allow the interrupt to be injected.

Fix by resetting the reinjection counters on unmask.

Unbreaks Xen.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 15 +++++++++++++++
 arch/x86/kvm/i8254.h |  1 +
 2 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 69d1bbff3fd..c13bb92d315 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -539,6 +539,16 @@ void kvm_pit_reset(struct kvm_pit *pit)
 	pit->pit_state.irq_ack = 1;
 }
 
+static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
+{
+	struct kvm_pit *pit = container_of(kimn, struct kvm_pit, mask_notifier);
+
+	if (!mask) {
+		atomic_set(&pit->pit_state.pit_timer.pending, 0);
+		pit->pit_state.irq_ack = 1;
+	}
+}
+
 struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 {
 	struct kvm_pit *pit;
@@ -586,6 +596,9 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 
 	kvm_pit_reset(pit);
 
+	pit->mask_notifier.func = pit_mask_notifer;
+	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
+
 	return pit;
 }
 
@@ -594,6 +607,8 @@ void kvm_free_pit(struct kvm *kvm)
 	struct hrtimer *timer;
 
 	if (kvm->arch.vpit) {
+		kvm_unregister_irq_mask_notifier(kvm, 0,
+					       &kvm->arch.vpit->mask_notifier);
 		mutex_lock(&kvm->arch.vpit->pit_state.lock);
 		timer = &kvm->arch.vpit->pit_state.pit_timer.timer;
 		hrtimer_cancel(timer);
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index 76959c4b500..6acbe4b505d 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -46,6 +46,7 @@ struct kvm_pit {
 	struct kvm *kvm;
 	struct kvm_kpit_state pit_state;
 	int irq_source_id;
+	struct kvm_irq_mask_notifier mask_notifier;
 };
 
 #define KVM_PIT_BASE_ADDRESS	    0x40
-- 
cgit v1.2.3


From a26b73ad5e763db1b01cca6965ac3b65fe36e82a Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Thu, 8 Jan 2009 13:58:48 +0100
Subject: KVM: ia64: expose registers in struct kvm_regs

Provide register layout for struct kvm_regs exposed to userland.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm.h | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index b5145784233..0ee5bd7a988 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -166,7 +166,40 @@ struct saved_vpd {
 	unsigned long  vcpuid[5];
 	unsigned long  vpsr;
 	unsigned long  vpr;
-	unsigned long  vcr[128];
+	union {
+		unsigned long  vcr[128];
+		struct {
+			unsigned long dcr;
+			unsigned long itm;
+			unsigned long iva;
+			unsigned long rsv1[5];
+			unsigned long pta;
+			unsigned long rsv2[7];
+			unsigned long ipsr;
+			unsigned long isr;
+			unsigned long rsv3;
+			unsigned long iip;
+			unsigned long ifa;
+			unsigned long itir;
+			unsigned long iipa;
+			unsigned long ifs;
+			unsigned long iim;
+			unsigned long iha;
+			unsigned long rsv4[38];
+			unsigned long lid;
+			unsigned long ivr;
+			unsigned long tpr;
+			unsigned long eoi;
+			unsigned long irr[4];
+			unsigned long itv;
+			unsigned long pmv;
+			unsigned long cmcv;
+			unsigned long rsv5[5];
+			unsigned long lrr0;
+			unsigned long lrr1;
+			unsigned long rsv6[46];
+		};
+	};
 };
 
 struct kvm_regs {
-- 
cgit v1.2.3


From ff81ff10b4417952919dcc0bd67effa9ceb411c0 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 8 Jan 2009 11:05:17 -0800
Subject: KVM: SVM: Fix typo in has_svm()

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 3a60c3f04e6..db5021b2b5a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -250,7 +250,7 @@ static int has_svm(void)
 	const char *msg;
 
 	if (!cpu_has_svm(&msg)) {
-		printk(KERN_INFO "has_svn: %s\n", msg);
+		printk(KERN_INFO "has_svm: %s\n", msg);
 		return 0;
 	}
 
-- 
cgit v1.2.3


From 9903a927a4aea4b1ea42356a8453fca664df0b18 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 8 Jan 2009 17:44:19 -0200
Subject: KVM: MMU: drop zeroing on mmu_memory_cache_alloc

Zeroing on mmu_memory_cache_alloc is unnecessary since:

- Smaller areas are pre-allocated with kmem_cache_zalloc.
- Page pointed by ->spt is overwritten with prefetch_page
  and entries in page pointed by ->gfns are initialized
  before reading.

[avi: zeroing pages is unnecessary]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index aac0499947d..de9a9fbc16e 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -352,7 +352,6 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc,
 
 	BUG_ON(!mc->nobjs);
 	p = mc->objects[--mc->nobjs];
-	memset(p, 0, size);
 	return p;
 }
 
-- 
cgit v1.2.3


From f6e2c02b6d28ddabe99377c5640a833407a62632 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 11 Jan 2009 13:02:10 +0200
Subject: KVM: MMU: Rename "metaphysical" attribute to "direct"

This actually describes what is going on, rather than alerting the reader
that something strange is going on.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  5 +++--
 arch/x86/kvm/mmu.c              | 32 ++++++++++++++++----------------
 arch/x86/kvm/paging_tmpl.h      | 12 ++++++------
 3 files changed, 25 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 863ea73431a..55fd4c5fd38 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -170,7 +170,8 @@ struct kvm_pte_chain {
  *   bits 0:3 - total guest paging levels (2-4, or zero for real mode)
  *   bits 4:7 - page table level for this shadow (1-4)
  *   bits 8:9 - page table quadrant for 2-level guests
- *   bit   16 - "metaphysical" - gfn is not a real page (huge page/real mode)
+ *   bit   16 - direct mapping of virtual to physical mapping at gfn
+ *              used for real mode and two-dimensional paging
  *   bits 17:19 - common access permissions for all ptes in this shadow page
  */
 union kvm_mmu_page_role {
@@ -180,7 +181,7 @@ union kvm_mmu_page_role {
 		unsigned level:4;
 		unsigned quadrant:2;
 		unsigned pad_for_nice_hex_output:6;
-		unsigned metaphysical:1;
+		unsigned direct:1;
 		unsigned access:3;
 		unsigned invalid:1;
 		unsigned cr4_pge:1;
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index de9a9fbc16e..ef060ec444a 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1066,7 +1066,7 @@ static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry(sp, node, bucket, hash_link)
-		if (sp->gfn == gfn && !sp->role.metaphysical
+		if (sp->gfn == gfn && !sp->role.direct
 		    && !sp->role.invalid) {
 			pgprintk("%s: found role %x\n",
 				 __func__, sp->role.word);
@@ -1200,7 +1200,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 					     gfn_t gfn,
 					     gva_t gaddr,
 					     unsigned level,
-					     int metaphysical,
+					     int direct,
 					     unsigned access,
 					     u64 *parent_pte)
 {
@@ -1213,7 +1213,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 
 	role = vcpu->arch.mmu.base_role;
 	role.level = level;
-	role.metaphysical = metaphysical;
+	role.direct = direct;
 	role.access = access;
 	if (vcpu->arch.mmu.root_level <= PT32_ROOT_LEVEL) {
 		quadrant = gaddr >> (PAGE_SHIFT + (PT64_PT_BITS * level));
@@ -1250,7 +1250,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	sp->role = role;
 	sp->global = role.cr4_pge;
 	hlist_add_head(&sp->hash_link, bucket);
-	if (!metaphysical) {
+	if (!direct) {
 		if (rmap_write_protect(vcpu->kvm, gfn))
 			kvm_flush_remote_tlbs(vcpu->kvm);
 		account_shadowed(vcpu->kvm, gfn);
@@ -1395,7 +1395,7 @@ static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 	kvm_mmu_page_unlink_children(kvm, sp);
 	kvm_mmu_unlink_parents(kvm, sp);
 	kvm_flush_remote_tlbs(kvm);
-	if (!sp->role.invalid && !sp->role.metaphysical)
+	if (!sp->role.invalid && !sp->role.direct)
 		unaccount_shadowed(kvm, sp->gfn);
 	if (sp->unsync)
 		kvm_unlink_unsync_page(kvm, sp);
@@ -1458,7 +1458,7 @@ static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link)
-		if (sp->gfn == gfn && !sp->role.metaphysical) {
+		if (sp->gfn == gfn && !sp->role.direct) {
 			pgprintk("%s: gfn %lx role %x\n", __func__, gfn,
 				 sp->role.word);
 			r = 1;
@@ -1478,7 +1478,7 @@ static void mmu_unshadow(struct kvm *kvm, gfn_t gfn)
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry_safe(sp, node, nn, bucket, hash_link) {
-		if (sp->gfn == gfn && !sp->role.metaphysical
+		if (sp->gfn == gfn && !sp->role.direct
 		    && !sp->role.invalid) {
 			pgprintk("%s: zap %lx %x\n",
 				 __func__, gfn, sp->role.word);
@@ -1638,7 +1638,7 @@ static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	/* don't unsync if pagetable is shadowed with multiple roles */
 	hlist_for_each_entry_safe(s, node, n, bucket, hash_link) {
-		if (s->gfn != sp->gfn || s->role.metaphysical)
+		if (s->gfn != sp->gfn || s->role.direct)
 			continue;
 		if (s->role.word != sp->role.word)
 			return 1;
@@ -1951,7 +1951,7 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 	int i;
 	gfn_t root_gfn;
 	struct kvm_mmu_page *sp;
-	int metaphysical = 0;
+	int direct = 0;
 
 	root_gfn = vcpu->arch.cr3 >> PAGE_SHIFT;
 
@@ -1960,18 +1960,18 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 
 		ASSERT(!VALID_PAGE(root));
 		if (tdp_enabled)
-			metaphysical = 1;
+			direct = 1;
 		sp = kvm_mmu_get_page(vcpu, root_gfn, 0,
-				      PT64_ROOT_LEVEL, metaphysical,
+				      PT64_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
 		vcpu->arch.mmu.root_hpa = root;
 		return;
 	}
-	metaphysical = !is_paging(vcpu);
+	direct = !is_paging(vcpu);
 	if (tdp_enabled)
-		metaphysical = 1;
+		direct = 1;
 	for (i = 0; i < 4; ++i) {
 		hpa_t root = vcpu->arch.mmu.pae_root[i];
 
@@ -1985,7 +1985,7 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 		} else if (vcpu->arch.mmu.root_level == 0)
 			root_gfn = 0;
 		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
-				      PT32_ROOT_LEVEL, metaphysical,
+				      PT32_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
@@ -2487,7 +2487,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link) {
-		if (sp->gfn != gfn || sp->role.metaphysical || sp->role.invalid)
+		if (sp->gfn != gfn || sp->role.direct || sp->role.invalid)
 			continue;
 		pte_size = sp->role.glevels == PT32_ROOT_LEVEL ? 4 : 8;
 		misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1);
@@ -3125,7 +3125,7 @@ static void audit_write_protection(struct kvm_vcpu *vcpu)
 	gfn_t gfn;
 
 	list_for_each_entry(sp, &vcpu->kvm->arch.active_mmu_pages, link) {
-		if (sp->role.metaphysical)
+		if (sp->role.direct)
 			continue;
 
 		gfn = unalias_gfn(vcpu->kvm, sp->gfn);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 46b68f941f6..7314c0944c5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -277,7 +277,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 	unsigned access = gw->pt_access;
 	struct kvm_mmu_page *shadow_page;
 	u64 spte, *sptep;
-	int metaphysical;
+	int direct;
 	gfn_t table_gfn;
 	int r;
 	int level;
@@ -313,17 +313,17 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 
 		if (level == PT_DIRECTORY_LEVEL
 		    && gw->level == PT_DIRECTORY_LEVEL) {
-			metaphysical = 1;
+			direct = 1;
 			if (!is_dirty_pte(gw->ptes[level - 1]))
 				access &= ~ACC_WRITE_MASK;
 			table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
 		} else {
-			metaphysical = 0;
+			direct = 0;
 			table_gfn = gw->table_gfn[level - 2];
 		}
 		shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
-					       metaphysical, access, sptep);
-		if (!metaphysical) {
+					       direct, access, sptep);
+		if (!direct) {
 			r = kvm_read_guest_atomic(vcpu->kvm,
 						  gw->pte_gpa[level - 2],
 						  &curr_pte, sizeof(curr_pte));
@@ -512,7 +512,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 	pt_element_t pt[256 / sizeof(pt_element_t)];
 	gpa_t pte_gpa;
 
-	if (sp->role.metaphysical
+	if (sp->role.direct
 	    || (PTTYPE == 32 && sp->role.level > PT_PAGE_TABLE_LEVEL)) {
 		nonpaging_prefetch_page(vcpu, sp);
 		return;
-- 
cgit v1.2.3


From 5a41accd3f69c6ef1d58f0c148980bae70515937 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 11 Jan 2009 17:19:35 +0200
Subject: KVM: MMU: Only enable cr4_pge role in shadow mode

Two dimensional paging is only confused by it.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6fbc3460337..19ccde621cd 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -364,7 +364,7 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	}
 	kvm_x86_ops->set_cr4(vcpu, cr4);
 	vcpu->arch.cr4 = cr4;
-	vcpu->arch.mmu.base_role.cr4_pge = !!(cr4 & X86_CR4_PGE);
+	vcpu->arch.mmu.base_role.cr4_pge = (cr4 & X86_CR4_PGE) && !tdp_enabled;
 	kvm_mmu_sync_global(vcpu);
 	kvm_mmu_reset_context(vcpu);
 }
-- 
cgit v1.2.3


From 87c656b4147cd08c6efba95d8d70c12cba181255 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Wed, 14 Jan 2009 10:47:36 -0600
Subject: powerpc/fsl-booke: declare tlbcam_index for use in c

So, KVM needs to read tlbcam_index to know exactly
which TLB1 entry is unused by host.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/mmu-fsl-booke.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
index 3f941c0f7e8..4285b64a65e 100644
--- a/arch/powerpc/include/asm/mmu-fsl-booke.h
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
@@ -75,6 +75,8 @@
 
 #ifndef __ASSEMBLY__
 
+extern unsigned int tlbcam_index;
+
 typedef struct {
 	unsigned int	id;
 	unsigned int	active;
-- 
cgit v1.2.3


From fb2838d446f6ee7e13e4149e08ec138753c5c450 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Wed, 14 Jan 2009 10:47:37 -0600
Subject: KVM: ppc: Fix e500 warnings and some spelling problems

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_emulate.c | 2 --
 arch/powerpc/kvm/e500_tlb.c     | 6 +++---
 arch/powerpc/kvm/e500_tlb.h     | 2 +-
 3 files changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index d3c0c7c7f20..7a98d4a4c1e 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -30,8 +30,6 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	int emulated = EMULATE_DONE;
 	int ra;
 	int rb;
-	int rs;
-	int rt;
 
 	switch (get_op(inst)) {
 	case 31:
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index 6a50340f575..e3daf57b5f5 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -260,7 +260,7 @@ static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
 	unsigned int victim, pidsel, tsized;
 	int tlbsel;
 
-	/* since we only have tow TLBs, only lower bit is used. */
+	/* since we only have two TLBs, only lower bit is used. */
 	tlbsel = (vcpu_e500->mas4 >> 28) & 0x1;
 	victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
 	pidsel = (vcpu_e500->mas4 >> 16) & 0xf;
@@ -402,7 +402,7 @@ int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *vcpu, int ra, int rb)
 
 	ia = (ea >> 2) & 0x1;
 
-	/* since we only have tow TLBs, only lower bit is used. */
+	/* since we only have two TLBs, only lower bit is used. */
 	tlbsel = (ea >> 3) & 0x1;
 
 	if (ia) {
@@ -471,7 +471,7 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb)
 	} else {
 		int victim;
 
-		/* since we only have tow TLBs, only lower bit is used. */
+		/* since we only have two TLBs, only lower bit is used. */
 		tlbsel = vcpu_e500->mas4 >> 28 & 0x1;
 		victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
 
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
index d8833f95516..ab49e935518 100644
--- a/arch/powerpc/kvm/e500_tlb.h
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -126,7 +126,7 @@ static inline unsigned int get_tlb_tlbsel(
 {
 	/*
 	 * Manual says that tlbsel has 2 bits wide.
-	 * Since we only have tow TLBs, only lower bit is used.
+	 * Since we only have two TLBs, only lower bit is used.
 	 */
 	return (vcpu_e500->mas0 >> 28) & 0x1;
 }
-- 
cgit v1.2.3


From 9aa4dd5e5f47a5feb96fc394fccf0265ab7d85a4 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Wed, 14 Jan 2009 10:47:38 -0600
Subject: KVM: ppc: Move to new TLB invalidate interface

Commit 2a4aca1144394653269720ffbb5a325a77abd5fa removed old method _tlbia().

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_tlb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index e3daf57b5f5..d437160d388 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -20,6 +20,7 @@
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_e500.h>
 
+#include "../mm/mmu_decl.h"
 #include "e500_tlb.h"
 
 #define to_htlb1_esel(esel) (tlb1_entry_num - (esel) - 1)
@@ -158,7 +159,7 @@ void kvmppc_e500_tlb_load(struct kvm_vcpu *vcpu, int cpu)
 
 void kvmppc_e500_tlb_put(struct kvm_vcpu *vcpu)
 {
-	_tlbia();
+	_tlbil_all();
 }
 
 /* Search the guest TLB for a matching entry. */
@@ -362,11 +363,10 @@ void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode)
 		int i;
 
 		/* XXX Replace loop with fancy data structures. */
-		/* needn't set modified since tlbia will make TLB1 coherent */
 		for (i = 0; i < tlb1_max_shadow_size(); i++)
 			kvmppc_e500_stlbe_invalidate(vcpu_e500, 1, i);
 
-		_tlbia();
+		_tlbil_all();
 	}
 }
 
@@ -417,7 +417,7 @@ int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *vcpu, int ra, int rb)
 			kvmppc_e500_gtlbe_invalidate(vcpu_e500, tlbsel, esel);
 	}
 
-	_tlbia();
+	_tlbil_all();
 
 	return EMULATE_DONE;
 }
@@ -604,7 +604,7 @@ void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
 			kvmppc_e500_shadow_release(vcpu_e500, tlbsel, i);
 
 	/* discard all guest mapping */
-	_tlbia();
+	_tlbil_all();
 }
 
 void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 eaddr, gpa_t gpaddr,
-- 
cgit v1.2.3


From 193554750441d91e127dd5066b8aebe0f769101c Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Wed, 14 Jan 2009 16:56:00 +0000
Subject: KVM: x86: Fix typos and whitespace errors

Some typos, comments, whitespace errors corrected in the cpuid code

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 19ccde621cd..141a0166e51 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1067,7 +1067,7 @@ long kvm_arch_dev_ioctl(struct file *filp,
 		if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
 			goto out;
 		r = kvm_dev_ioctl_get_supported_cpuid(&cpuid,
-			cpuid_arg->entries);
+						      cpuid_arg->entries);
 		if (r)
 			goto out;
 
@@ -1165,8 +1165,8 @@ out:
 }
 
 static int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
-				    struct kvm_cpuid2 *cpuid,
-				    struct kvm_cpuid_entry2 __user *entries)
+				     struct kvm_cpuid2 *cpuid,
+				     struct kvm_cpuid_entry2 __user *entries)
 {
 	int r;
 
@@ -1185,8 +1185,8 @@ out:
 }
 
 static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
-				    struct kvm_cpuid2 *cpuid,
-				    struct kvm_cpuid_entry2 __user *entries)
+				     struct kvm_cpuid2 *cpuid,
+				     struct kvm_cpuid_entry2 __user *entries)
 {
 	int r;
 
@@ -1195,7 +1195,7 @@ static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
 		goto out;
 	r = -EFAULT;
 	if (copy_to_user(entries, &vcpu->arch.cpuid_entries,
-			   vcpu->arch.cpuid_nent * sizeof(struct kvm_cpuid_entry2)))
+			 vcpu->arch.cpuid_nent * sizeof(struct kvm_cpuid_entry2)))
 		goto out;
 	return 0;
 
@@ -1205,12 +1205,12 @@ out:
 }
 
 static void do_cpuid_1_ent(struct kvm_cpuid_entry2 *entry, u32 function,
-			  u32 index)
+			   u32 index)
 {
 	entry->function = function;
 	entry->index = index;
 	cpuid_count(entry->function, entry->index,
-		&entry->eax, &entry->ebx, &entry->ecx, &entry->edx);
+		    &entry->eax, &entry->ebx, &entry->ecx, &entry->edx);
 	entry->flags = 0;
 }
 
@@ -1249,7 +1249,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		bit(X86_FEATURE_LAHF_LM) | bit(X86_FEATURE_CMP_LEGACY) |
 		bit(X86_FEATURE_SVM);
 
-	/* all func 2 cpuid_count() should be called on the same cpu */
+	/* all calls to cpuid_count() should be made on the same cpu */
 	get_cpu();
 	do_cpuid_1_ent(entry, function, index);
 	++*nent;
@@ -1323,7 +1323,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 }
 
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
-				    struct kvm_cpuid_entry2 __user *entries)
+				     struct kvm_cpuid_entry2 __user *entries)
 {
 	struct kvm_cpuid_entry2 *cpuid_entries;
 	int limit, nent = 0, r = -E2BIG;
@@ -1340,7 +1340,7 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 	limit = cpuid_entries[0].eax;
 	for (func = 1; func <= limit && nent < cpuid->nent; ++func)
 		do_cpuid_ent(&cpuid_entries[nent], func, 0,
-				&nent, cpuid->nent);
+			     &nent, cpuid->nent);
 	r = -E2BIG;
 	if (nent >= cpuid->nent)
 		goto out_free;
@@ -1349,10 +1349,10 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 	limit = cpuid_entries[nent - 1].eax;
 	for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func)
 		do_cpuid_ent(&cpuid_entries[nent], func, 0,
-			       &nent, cpuid->nent);
+			     &nent, cpuid->nent);
 	r = -EFAULT;
 	if (copy_to_user(entries, cpuid_entries,
-			nent * sizeof(struct kvm_cpuid_entry2)))
+			 nent * sizeof(struct kvm_cpuid_entry2)))
 		goto out_free;
 	cpuid->nent = nent;
 	r = 0;
@@ -1496,7 +1496,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
 			goto out;
 		r = kvm_vcpu_ioctl_set_cpuid2(vcpu, &cpuid,
-				cpuid_arg->entries);
+					      cpuid_arg->entries);
 		if (r)
 			goto out;
 		break;
@@ -1509,7 +1509,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
 			goto out;
 		r = kvm_vcpu_ioctl_get_cpuid2(vcpu, &cpuid,
-				cpuid_arg->entries);
+					      cpuid_arg->entries);
 		if (r)
 			goto out;
 		r = -EFAULT;
@@ -2864,7 +2864,7 @@ static int is_matching_cpuid_entry(struct kvm_cpuid_entry2 *e,
 	if ((e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) && e->index != index)
 		return 0;
 	if ((e->flags & KVM_CPUID_FLAG_STATEFUL_FUNC) &&
-		!(e->flags & KVM_CPUID_FLAG_STATE_READ_NEXT))
+	    !(e->flags & KVM_CPUID_FLAG_STATE_READ_NEXT))
 		return 0;
 	return 1;
 }
@@ -2892,7 +2892,6 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 			if (!best || e->function > best->function)
 				best = e;
 	}
-
 	return best;
 }
 
-- 
cgit v1.2.3


From 399ec807ddc38ecccf8c06dbde04531cbdc63e11 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 19 Nov 2008 13:58:46 +0200
Subject: KVM: Userspace controlled irq routing

Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC).  This is insufficient for several reasons:

- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
  ioapics

This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table.  The
routing table is initialized according to the current hardwired mapping.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 5 +++++
 arch/x86/kvm/x86.c       | 6 ++++++
 2 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 1477f91617a..dbf527a5734 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -919,6 +919,11 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = kvm_ioapic_init(kvm);
 		if (r)
 			goto out;
+		r = kvm_setup_default_irq_routing(kvm);
+		if (r) {
+			kfree(kvm->arch.vioapic);
+			goto out;
+		}
 		break;
 	case KVM_IRQ_LINE: {
 		struct kvm_irq_level irq_event;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 141a0166e51..32e3a7ec6ad 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1835,6 +1835,12 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			}
 		} else
 			goto out;
+		r = kvm_setup_default_irq_routing(kvm);
+		if (r) {
+			kfree(kvm->arch.vpic);
+			kfree(kvm->arch.vioapic);
+			goto out;
+		}
 		break;
 	case KVM_CREATE_PIT:
 		mutex_lock(&kvm->lock);
-- 
cgit v1.2.3


From 91b2ae773d3b168b763237fac33f75b13d891f20 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 19 Jan 2009 14:57:52 +0200
Subject: KVM: Avoid using CONFIG_ in userspace visible headers

Kconfig symbols are not available in userspace, and are not stripped by
headers-install.  Avoid their use by adding #defines in <asm/kvm.h> to
suit each architecture.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 54bcf228152..dc3f6cf1170 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -15,6 +15,7 @@
 #define __KVM_HAVE_DEVICE_ASSIGNMENT
 #define __KVM_HAVE_MSI
 #define __KVM_HAVE_USER_NMI
+#define __KVM_HAVE_GUEST_DEBUG
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
-- 
cgit v1.2.3


From 27d146449ccaad16480888129bb32a000ee33717 Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Thu, 15 Jan 2009 17:58:19 +0800
Subject: KVM: ia64: vTLB change for enabling windows 2008 boot

Simply the logic of hash vTLB, and export kvm_gpa_to_mpa.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/vcpu.h |  4 ++--
 arch/ia64/kvm/vtlb.c | 39 +++++++++++++++++----------------------
 2 files changed, 19 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h
index b2f12a562bd..042af92ced8 100644
--- a/arch/ia64/kvm/vcpu.h
+++ b/arch/ia64/kvm/vcpu.h
@@ -703,7 +703,7 @@ extern u64 guest_vhpt_lookup(u64 iha, u64 *pte);
 extern void thash_purge_entries(struct kvm_vcpu *v, u64 va, u64 ps);
 extern void thash_purge_entries_remote(struct kvm_vcpu *v, u64 va, u64 ps);
 extern u64 translate_phy_pte(u64 *pte, u64 itir, u64 va);
-extern int thash_purge_and_insert(struct kvm_vcpu *v, u64 pte,
+extern void thash_purge_and_insert(struct kvm_vcpu *v, u64 pte,
 		u64 itir, u64 ifa, int type);
 extern void thash_purge_all(struct kvm_vcpu *v);
 extern struct thash_data *vtlb_lookup(struct kvm_vcpu *v,
@@ -738,7 +738,7 @@ void kvm_init_vhpt(struct kvm_vcpu *v);
 void thash_init(struct thash_cb *hcb, u64 sz);
 
 void panic_vm(struct kvm_vcpu *v, const char *fmt, ...);
-
+u64 kvm_gpa_to_mpa(u64 gpa);
 extern u64 ia64_call_vsa(u64 proc, u64 arg1, u64 arg2, u64 arg3,
 		u64 arg4, u64 arg5, u64 arg6, u64 arg7);
 
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index ac94867f826..38232b37668 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -164,11 +164,11 @@ static void vhpt_insert(u64 pte, u64 itir, u64 ifa, u64 gpte)
 	unsigned long ps, gpaddr;
 
 	ps = itir_ps(itir);
+	rr.val = ia64_get_rr(ifa);
 
-	gpaddr = ((gpte & _PAGE_PPN_MASK) >> ps << ps) |
-		(ifa & ((1UL << ps) - 1));
+	 gpaddr = ((gpte & _PAGE_PPN_MASK) >> ps << ps) |
+					(ifa & ((1UL << ps) - 1));
 
-	rr.val = ia64_get_rr(ifa);
 	head = (struct thash_data *)ia64_thash(ifa);
 	head->etag = INVALID_TI_TAG;
 	ia64_mf();
@@ -412,16 +412,14 @@ u64 translate_phy_pte(u64 *pte, u64 itir, u64 va)
 
 /*
  * Purge overlap TCs and then insert the new entry to emulate itc ops.
- *    Notes: Only TC entry can purge and insert.
- *    1 indicates this is MMIO
+ * Notes: Only TC entry can purge and insert.
  */
-int thash_purge_and_insert(struct kvm_vcpu *v, u64 pte, u64 itir,
+void  thash_purge_and_insert(struct kvm_vcpu *v, u64 pte, u64 itir,
 						u64 ifa, int type)
 {
 	u64 ps;
 	u64 phy_pte, io_mask, index;
 	union ia64_rr vrr, mrr;
-	int ret = 0;
 
 	ps = itir_ps(itir);
 	vrr.val = vcpu_get_rr(v, ifa);
@@ -441,25 +439,19 @@ int thash_purge_and_insert(struct kvm_vcpu *v, u64 pte, u64 itir,
 		phy_pte &= ~_PAGE_MA_MASK;
 	}
 
-	if (pte & VTLB_PTE_IO)
-		ret = 1;
-
 	vtlb_purge(v, ifa, ps);
 	vhpt_purge(v, ifa, ps);
 
-	if (ps == mrr.ps) {
-		if (!(pte&VTLB_PTE_IO)) {
-			vhpt_insert(phy_pte, itir, ifa, pte);
-		} else {
-			vtlb_insert(v, pte, itir, ifa);
-			vcpu_quick_region_set(VMX(v, tc_regions), ifa);
-		}
-	} else if (ps > mrr.ps) {
+	if ((ps != mrr.ps) || (pte & VTLB_PTE_IO)) {
 		vtlb_insert(v, pte, itir, ifa);
 		vcpu_quick_region_set(VMX(v, tc_regions), ifa);
-		if (!(pte&VTLB_PTE_IO))
-			vhpt_insert(phy_pte, itir, ifa, pte);
-	} else {
+	}
+	if (pte & VTLB_PTE_IO)
+		return;
+
+	if (ps >= mrr.ps)
+		vhpt_insert(phy_pte, itir, ifa, pte);
+	else {
 		u64 psr;
 		phy_pte  &= ~PAGE_FLAGS_RV_MASK;
 		psr = ia64_clear_ic();
@@ -469,7 +461,6 @@ int thash_purge_and_insert(struct kvm_vcpu *v, u64 pte, u64 itir,
 	if (!(pte&VTLB_PTE_IO))
 		mark_pages_dirty(v, pte, ps);
 
-	return ret;
 }
 
 /*
@@ -570,6 +561,10 @@ void thash_init(struct thash_cb *hcb, u64 sz)
 u64 kvm_get_mpt_entry(u64 gpfn)
 {
 	u64 *base = (u64 *) KVM_P2M_BASE;
+
+	if (gpfn >= (KVM_P2M_SIZE >> 3))
+		panic_vm(current_vcpu, "Invalid gpfn =%lx\n", gpfn);
+
 	return *(base + gpfn);
 }
 
-- 
cgit v1.2.3


From 4b7bb626e3133eab131328a0770864b322c1bfe6 Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Thu, 15 Jan 2009 18:08:36 +0800
Subject: KVM: ia64: Add the support for translating PAL Call's pointer args

Add the support to translate PAL Call's pointer args.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/process.c | 48 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index f9c9504144f..0e727ce0d55 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -550,18 +550,60 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim,
 	inject_guest_interruption(vcpu, vector);
 }
 
+static unsigned long kvm_trans_pal_call_args(struct kvm_vcpu *vcpu,
+						unsigned long arg)
+{
+	struct thash_data *data;
+	unsigned long gpa, poff;
+
+	if (!is_physical_mode(vcpu)) {
+		/* Depends on caller to provide the DTR or DTC mapping.*/
+		data = vtlb_lookup(vcpu, arg, D_TLB);
+		if (data)
+			gpa = data->page_flags & _PAGE_PPN_MASK;
+		else {
+			data = vhpt_lookup(arg);
+			if (!data)
+				return 0;
+			gpa = data->gpaddr & _PAGE_PPN_MASK;
+		}
+
+		poff = arg & (PSIZE(data->ps) - 1);
+		arg = PAGEALIGN(gpa, data->ps) | poff;
+	}
+	arg = kvm_gpa_to_mpa(arg << 1 >> 1);
+
+	return (unsigned long)__va(arg);
+}
+
 static void set_pal_call_data(struct kvm_vcpu *vcpu)
 {
 	struct exit_ctl_data *p = &vcpu->arch.exit_data;
+	unsigned long gr28 = vcpu_get_gr(vcpu, 28);
+	unsigned long gr29 = vcpu_get_gr(vcpu, 29);
+	unsigned long gr30 = vcpu_get_gr(vcpu, 30);
 
 	/*FIXME:For static and stacked convention, firmware
 	 * has put the parameters in gr28-gr31 before
 	 * break to vmm  !!*/
 
-	p->u.pal_data.gr28 = vcpu_get_gr(vcpu, 28);
-	p->u.pal_data.gr29 = vcpu_get_gr(vcpu, 29);
-	p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
+	switch (gr28) {
+	case PAL_PERF_MON_INFO:
+	case PAL_HALT_INFO:
+		p->u.pal_data.gr29 =  kvm_trans_pal_call_args(vcpu, gr29);
+		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
+		break;
+	case PAL_BRAND_INFO:
+		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
+		break;
+	default:
+		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
+	}
+	p->u.pal_data.gr28 = gr28;
 	p->u.pal_data.gr31 = vcpu_get_gr(vcpu, 31);
+
 	p->exit_reason = EXIT_REASON_PAL_CALL;
 }
 
-- 
cgit v1.2.3


From 7d656bd996b68737d5d07643bc57311059038d67 Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Wed, 21 Jan 2009 11:21:27 +0800
Subject: KVM: ia64: Implement some pal calls needed for windows 2008

For windows 2008, it needs more pal calls to implement for booting.
In addition, also changes the name of set_{sal, pal}_call_result to
get_{sal,pal}_call_result for readability.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm_fw.c  | 151 +++++++++++++++++++++++++++++++++++++++++++++++-
 arch/ia64/kvm/process.c |   8 +--
 2 files changed, 152 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c
index cb7600bdff9..a8ae52ed563 100644
--- a/arch/ia64/kvm/kvm_fw.c
+++ b/arch/ia64/kvm/kvm_fw.c
@@ -227,6 +227,18 @@ static struct ia64_pal_retval pal_proc_get_features(struct kvm_vcpu *vcpu)
 	return result;
 }
 
+static struct ia64_pal_retval pal_register_info(struct kvm_vcpu *vcpu)
+{
+
+	struct ia64_pal_retval result = {0, 0, 0, 0};
+	long in0, in1, in2, in3;
+
+	kvm_get_pal_call_data(vcpu, &in0, &in1, &in2, &in3);
+	result.status = ia64_pal_register_info(in1, &result.v1, &result.v2);
+
+	return result;
+}
+
 static struct ia64_pal_retval pal_cache_info(struct kvm_vcpu *vcpu)
 {
 
@@ -268,8 +280,12 @@ static struct ia64_pal_retval pal_vm_summary(struct kvm_vcpu *vcpu)
 static struct ia64_pal_retval pal_vm_info(struct kvm_vcpu *vcpu)
 {
 	struct ia64_pal_retval result;
+	unsigned long in0, in1, in2, in3;
 
-	INIT_PAL_STATUS_UNIMPLEMENTED(result);
+	kvm_get_pal_call_data(vcpu, &in0, &in1, &in2, &in3);
+
+	result.status = ia64_pal_vm_info(in1, in2,
+			(pal_tc_info_u_t *)&result.v1, &result.v2);
 
 	return result;
 }
@@ -292,6 +308,108 @@ static void prepare_for_halt(struct kvm_vcpu *vcpu)
 	vcpu->arch.timer_fired = 0;
 }
 
+static struct ia64_pal_retval pal_perf_mon_info(struct kvm_vcpu *vcpu)
+{
+	long status;
+	unsigned long in0, in1, in2, in3, r9;
+	unsigned long pm_buffer[16];
+
+	kvm_get_pal_call_data(vcpu, &in0, &in1, &in2, &in3);
+	status = ia64_pal_perf_mon_info(pm_buffer,
+				(pal_perf_mon_info_u_t *) &r9);
+	if (status != 0) {
+		printk(KERN_DEBUG"PAL_PERF_MON_INFO fails ret=%ld\n", status);
+	} else {
+		if (in1)
+			memcpy((void *)in1, pm_buffer, sizeof(pm_buffer));
+		else {
+			status = PAL_STATUS_EINVAL;
+			printk(KERN_WARNING"Invalid parameters "
+						"for PAL call:0x%lx!\n", in0);
+		}
+	}
+	return (struct ia64_pal_retval){status, r9, 0, 0};
+}
+
+static struct ia64_pal_retval pal_halt_info(struct kvm_vcpu *vcpu)
+{
+	unsigned long in0, in1, in2, in3;
+	long status;
+	unsigned long res = 1000UL | (1000UL << 16) | (10UL << 32)
+					| (1UL << 61) | (1UL << 60);
+
+	kvm_get_pal_call_data(vcpu, &in0, &in1, &in2, &in3);
+	if (in1) {
+		memcpy((void *)in1, &res, sizeof(res));
+		status = 0;
+	} else{
+		status = PAL_STATUS_EINVAL;
+		printk(KERN_WARNING"Invalid parameters "
+					"for PAL call:0x%lx!\n", in0);
+	}
+
+	return (struct ia64_pal_retval){status, 0, 0, 0};
+}
+
+static struct ia64_pal_retval pal_mem_attrib(struct kvm_vcpu *vcpu)
+{
+	unsigned long r9;
+	long status;
+
+	status = ia64_pal_mem_attrib(&r9);
+
+	return (struct ia64_pal_retval){status, r9, 0, 0};
+}
+
+static void remote_pal_prefetch_visibility(void *v)
+{
+	s64 trans_type = (s64)v;
+	ia64_pal_prefetch_visibility(trans_type);
+}
+
+static struct ia64_pal_retval pal_prefetch_visibility(struct kvm_vcpu *vcpu)
+{
+	struct ia64_pal_retval result = {0, 0, 0, 0};
+	unsigned long in0, in1, in2, in3;
+	kvm_get_pal_call_data(vcpu, &in0, &in1, &in2, &in3);
+	result.status = ia64_pal_prefetch_visibility(in1);
+	if (result.status == 0) {
+		/* Must be performed on all remote processors
+		in the coherence domain. */
+		smp_call_function(remote_pal_prefetch_visibility,
+					(void *)in1, 1);
+		/* Unnecessary on remote processor for other vcpus!*/
+		result.status = 1;
+	}
+	return result;
+}
+
+static void remote_pal_mc_drain(void *v)
+{
+	ia64_pal_mc_drain();
+}
+
+static struct ia64_pal_retval pal_get_brand_info(struct kvm_vcpu *vcpu)
+{
+	struct ia64_pal_retval result = {0, 0, 0, 0};
+	unsigned long in0, in1, in2, in3;
+
+	kvm_get_pal_call_data(vcpu, &in0, &in1, &in2, &in3);
+
+	if (in1 == 0 && in2) {
+		char brand_info[128];
+		result.status = ia64_pal_get_brand_info(brand_info);
+		if (result.status == PAL_STATUS_SUCCESS)
+			memcpy((void *)in2, brand_info, 128);
+	} else {
+		result.status = PAL_STATUS_REQUIRES_MEMORY;
+		printk(KERN_WARNING"Invalid parameters for "
+					"PAL call:0x%lx!\n", in0);
+	}
+
+	return result;
+}
+
 int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 
@@ -300,14 +418,22 @@ int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	int ret = 1;
 
 	gr28 = kvm_get_pal_call_index(vcpu);
-	/*printk("pal_call index:%lx\n",gr28);*/
 	switch (gr28) {
 	case PAL_CACHE_FLUSH:
 		result = pal_cache_flush(vcpu);
 		break;
+	case PAL_MEM_ATTRIB:
+		result = pal_mem_attrib(vcpu);
+		break;
 	case PAL_CACHE_SUMMARY:
 		result = pal_cache_summary(vcpu);
 		break;
+	case PAL_PERF_MON_INFO:
+		result = pal_perf_mon_info(vcpu);
+		break;
+	case PAL_HALT_INFO:
+		result = pal_halt_info(vcpu);
+		break;
 	case PAL_HALT_LIGHT:
 	{
 		INIT_PAL_STATUS_SUCCESS(result);
@@ -317,6 +443,16 @@ int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	}
 		break;
 
+	case PAL_PREFETCH_VISIBILITY:
+		result = pal_prefetch_visibility(vcpu);
+		break;
+	case PAL_MC_DRAIN:
+		result.status = ia64_pal_mc_drain();
+		/* FIXME: All vcpus likely call PAL_MC_DRAIN.
+		   That causes the congestion. */
+		smp_call_function(remote_pal_mc_drain, NULL, 1);
+		break;
+
 	case PAL_FREQ_RATIOS:
 		result = pal_freq_ratios(vcpu);
 		break;
@@ -346,6 +482,9 @@ int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		INIT_PAL_STATUS_SUCCESS(result);
 		result.v1 = (1L << 32) | 1L;
 		break;
+	case PAL_REGISTER_INFO:
+		result = pal_register_info(vcpu);
+		break;
 	case PAL_VM_PAGE_SIZE:
 		result.status = ia64_pal_vm_page_size(&result.v0,
 							&result.v1);
@@ -365,12 +504,18 @@ int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		result.status = ia64_pal_version(
 				(pal_version_u_t *)&result.v0,
 				(pal_version_u_t *)&result.v1);
-
 		break;
 	case PAL_FIXED_ADDR:
 		result.status = PAL_STATUS_SUCCESS;
 		result.v0 = vcpu->vcpu_id;
 		break;
+	case PAL_BRAND_INFO:
+		result = pal_get_brand_info(vcpu);
+		break;
+	case PAL_GET_PSTATE:
+	case PAL_CACHE_SHARED_INFO:
+		INIT_PAL_STATUS_UNIMPLEMENTED(result);
+		break;
 	default:
 		INIT_PAL_STATUS_UNIMPLEMENTED(result);
 		printk(KERN_WARNING"kvm: Unsupported pal call,"
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index 0e727ce0d55..b1dc80952d9 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -607,7 +607,7 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu)
 	p->exit_reason = EXIT_REASON_PAL_CALL;
 }
 
-static void set_pal_call_result(struct kvm_vcpu *vcpu)
+static void get_pal_call_result(struct kvm_vcpu *vcpu)
 {
 	struct exit_ctl_data *p = &vcpu->arch.exit_data;
 
@@ -635,7 +635,7 @@ static void set_sal_call_data(struct kvm_vcpu *vcpu)
 	p->exit_reason = EXIT_REASON_SAL_CALL;
 }
 
-static void set_sal_call_result(struct kvm_vcpu *vcpu)
+static void get_sal_call_result(struct kvm_vcpu *vcpu)
 {
 	struct exit_ctl_data *p = &vcpu->arch.exit_data;
 
@@ -658,13 +658,13 @@ void  kvm_ia64_handle_break(unsigned long ifa, struct kvm_pt_regs *regs,
 		if (iim == DOMN_PAL_REQUEST) {
 			set_pal_call_data(v);
 			vmm_transition(v);
-			set_pal_call_result(v);
+			get_pal_call_result(v);
 			vcpu_increment_iip(v);
 			return;
 		} else if (iim == DOMN_SAL_REQUEST) {
 			set_sal_call_data(v);
 			vmm_transition(v);
-			set_sal_call_result(v);
+			get_sal_call_result(v);
 			vcpu_increment_iip(v);
 			return;
 		}
-- 
cgit v1.2.3


From 2c411b48af3e3c534b9cfb6a79be1df384d1ca1a Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 22 Jan 2009 14:20:27 +0100
Subject: KVM: s390: Fix printk on SIGP set arch

KVM on s390 does not support the ESA/390 architecture. We refuse to
change the architecture mode and print a warning. This patch removes
the printk for several reasons:

o A malicious guest can flood host dmesg
o The old message had no newline
o there is no connection between the message and the failing guest

This patch simply removes the printk. We already set the condition
code to 3 - the guest knows that something went wrong.

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/kvm/sigp.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 2a01b9e0280..f27dbedf086 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -153,8 +153,6 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 
 	switch (parameter & 0xff) {
 	case 0:
-		printk(KERN_WARNING "kvm: request to switch to ESA/390 mode"
-							" not supported");
 		rc = 3; /* not operational */
 		break;
 	case 1:
-- 
cgit v1.2.3


From 70455a36a073cbb83ca17f92d135a6128c73cb3c Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 22 Jan 2009 10:28:29 +0100
Subject: KVM: s390: Fix problem state check for b2 intercepts

The kernel handles some priviledged instruction exits. While I was
unable to trigger such an exit from guest userspace, the code should
check for supervisor state before emulating a priviledged instruction.

I also renamed kvm_s390_handle_priv to kvm_s390_handle_b2. After all
there are non priviledged b2 instructions like stck (store clock).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/kvm/intercept.c |  2 +-
 arch/s390/kvm/kvm-s390.h  |  2 +-
 arch/s390/kvm/priv.c      | 18 +++++++++++++++---
 3 files changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 61236102203..9d19803111b 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -103,7 +103,7 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
 static intercept_handler_t instruction_handlers[256] = {
 	[0x83] = kvm_s390_handle_diag,
 	[0xae] = kvm_s390_handle_sigp,
-	[0xb2] = kvm_s390_handle_priv,
+	[0xb2] = kvm_s390_handle_b2,
 	[0xb7] = handle_lctl,
 	[0xeb] = handle_lctlg,
 };
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 3893cf12eac..00bbe69b78d 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -50,7 +50,7 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
 
 /* implemented in priv.c */
-int kvm_s390_handle_priv(struct kvm_vcpu *vcpu);
+int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
 
 /* implemented in sigp.c */
 int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 3605df45dd4..4b88834b8dd 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -304,12 +304,24 @@ static intercept_handler_t priv_handlers[256] = {
 	[0xb1] = handle_stfl,
 };
 
-int kvm_s390_handle_priv(struct kvm_vcpu *vcpu)
+int kvm_s390_handle_b2(struct kvm_vcpu *vcpu)
 {
 	intercept_handler_t handler;
 
+	/*
+	 * a lot of B2 instructions are priviledged. We first check for
+	 * the priviledges ones, that we can handle in the kernel. If the
+	 * kernel can handle this instruction, we check for the problem
+	 * state bit and (a) handle the instruction or (b) send a code 2
+	 * program check.
+	 * Anything else goes to userspace.*/
 	handler = priv_handlers[vcpu->arch.sie_block->ipa & 0x00ff];
-	if (handler)
-		return handler(vcpu);
+	if (handler) {
+		if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
+			return kvm_s390_inject_program_int(vcpu,
+						   PGM_PRIVILEGED_OPERATION);
+		else
+			return handler(vcpu);
+	}
 	return -ENOTSUPP;
 }
-- 
cgit v1.2.3


From b7e6e4d3602c738b8f61225d9f4514945df52f07 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 22 Jan 2009 10:29:08 +0100
Subject: KVM: s390: Fix SIGP set prefix ioctl

This patch fixes the SET PREFIX interrupt if triggered by userspace.
Until now, it was not necessary, but life migration will need it. In
addition, it helped me creating SMP support for my kvm_crashme tool
(lets kvm execute random guest memory content).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/kvm/interrupt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index f4fe28a2521..0189356fe20 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -555,9 +555,14 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 		VCPU_EVENT(vcpu, 3, "inject: program check %d (from user)",
 			   s390int->parm);
 		break;
+	case KVM_S390_SIGP_SET_PREFIX:
+		inti->prefix.address = s390int->parm;
+		inti->type = s390int->type;
+		VCPU_EVENT(vcpu, 3, "inject: set prefix to %x (from user)",
+			   s390int->parm);
+		break;
 	case KVM_S390_SIGP_STOP:
 	case KVM_S390_RESTART:
-	case KVM_S390_SIGP_SET_PREFIX:
 	case KVM_S390_INT_EMERGENCY:
 		VCPU_EVENT(vcpu, 3, "inject: type %x", s390int->type);
 		inti->type = s390int->type;
-- 
cgit v1.2.3


From 934d534f8a5a39e20d5682b3a3a45ff351706b59 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Wed, 21 Jan 2009 15:16:43 +0100
Subject: KVM: ia64: dynamic nr online cpus

Account for number of online cpus and use that in loops iterating over
the list of vpus instead of scanning the full array unconditionally.
This patch is a building block to facilitate allowing to bump up
the size of MAX_VCPUS significantly.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang  <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_host.h | 10 ++++++----
 arch/ia64/kvm/kvm-ia64.c         | 12 ++++++++----
 arch/ia64/kvm/vcpu.c             |  5 ++++-
 3 files changed, 18 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 46f8b0eb568..4542651e6ac 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -157,10 +157,10 @@ struct kvm_vm_data {
 	struct kvm_vcpu_data vcpu_data[KVM_MAX_VCPUS];
 };
 
-#define VCPU_BASE(n)	KVM_VM_DATA_BASE + \
-				offsetof(struct kvm_vm_data, vcpu_data[n])
-#define VM_BASE		KVM_VM_DATA_BASE + \
-				offsetof(struct kvm_vm_data, kvm_vm_struct)
+#define VCPU_BASE(n)	(KVM_VM_DATA_BASE + \
+				offsetof(struct kvm_vm_data, vcpu_data[n]))
+#define KVM_VM_BASE	(KVM_VM_DATA_BASE + \
+				offsetof(struct kvm_vm_data, kvm_vm_struct))
 #define KVM_MEM_DIRTY_LOG_BASE	KVM_VM_DATA_BASE + \
 				offsetof(struct kvm_vm_data, kvm_mem_dirty_log)
 
@@ -464,6 +464,8 @@ struct kvm_arch {
 	unsigned long	metaphysical_rr4;
 	unsigned long	vmm_init_rr;
 
+	int		online_vcpus;
+
 	struct kvm_ioapic *vioapic;
 	struct kvm_vm_stat stat;
 	struct kvm_sal_data rdv_sal_data;
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index dbf527a5734..9c77e3939e9 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -314,7 +314,7 @@ static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
 	union ia64_lid lid;
 	int i;
 
-	for (i = 0; i < KVM_MAX_VCPUS; i++) {
+	for (i = 0; i < kvm->arch.online_vcpus; i++) {
 		if (kvm->vcpus[i]) {
 			lid.val = VCPU_LID(kvm->vcpus[i]);
 			if (lid.id == id && lid.eid == eid)
@@ -388,7 +388,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
-	for (i = 0; i < KVM_MAX_VCPUS; i++) {
+	for (i = 0; i < kvm->arch.online_vcpus; i++) {
 		if (!kvm->vcpus[i] || kvm->vcpus[i]->arch.mp_state ==
 						KVM_MP_STATE_UNINITIALIZED ||
 					vcpu == kvm->vcpus[i])
@@ -788,6 +788,8 @@ struct  kvm *kvm_arch_create_vm(void)
 		return ERR_PTR(-ENOMEM);
 	kvm_init_vm(kvm);
 
+	kvm->arch.online_vcpus = 0;
+
 	return kvm;
 
 }
@@ -1154,7 +1156,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 		/*Initialize itc offset for vcpus*/
 		itc_offset = 0UL - ia64_getreg(_IA64_REG_AR_ITC);
-		for (i = 0; i < KVM_MAX_VCPUS; i++) {
+		for (i = 0; i < kvm->arch.online_vcpus; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
 			v->arch.itc_offset = itc_offset;
@@ -1288,6 +1290,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 		goto fail;
 	}
 
+	kvm->arch.online_vcpus++;
+
 	return vcpu;
 fail:
 	return ERR_PTR(r);
@@ -1828,7 +1832,7 @@ struct kvm_vcpu *kvm_get_lowest_prio_vcpu(struct kvm *kvm, u8 vector,
 	struct kvm_vcpu *lvcpu = kvm->vcpus[0];
 	int i;
 
-	for (i = 1; i < KVM_MAX_VCPUS; i++) {
+	for (i = 1; i < kvm->arch.online_vcpus; i++) {
 		if (!kvm->vcpus[i])
 			continue;
 		if (lvcpu->arch.xtp > kvm->vcpus[i]->arch.xtp)
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index 4d8be4c252f..d4d28050587 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -807,12 +807,15 @@ static inline void vcpu_set_itm(struct kvm_vcpu *vcpu, u64 val);
 static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 {
 	struct kvm_vcpu *v;
+	struct kvm *kvm;
 	int i;
 	long itc_offset = val - ia64_getreg(_IA64_REG_AR_ITC);
 	unsigned long vitv = VCPU(vcpu, itv);
 
+	kvm = (struct kvm *)KVM_VM_BASE;
+
 	if (vcpu->vcpu_id == 0) {
-		for (i = 0; i < KVM_MAX_VCPUS; i++) {
+		for (i = 0; i < kvm->arch.online_vcpus; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
 			VMX(v, itc_offset) = itc_offset;
-- 
cgit v1.2.3


From 44882eed2ebe7f75f8cdae5671ab1d6e0fa40dbc Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 27 Jan 2009 15:12:38 -0200
Subject: KVM: make irq ack notifications aware of routing table

IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.

Translate before acking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
---
 arch/x86/kvm/i8259.c | 5 +++--
 arch/x86/kvm/irq.h   | 2 ++
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 179dcb0103f..93160375c84 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -49,7 +49,8 @@ static void pic_unlock(struct kvm_pic *s)
 	spin_unlock(&s->lock);
 
 	while (acks) {
-		kvm_notify_acked_irq(kvm, __ffs(acks));
+		kvm_notify_acked_irq(kvm, SELECT_PIC(__ffs(acks)),
+				     __ffs(acks));
 		acks &= acks - 1;
 	}
 
@@ -232,7 +233,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 	}
 	pic_update_irq(s);
 	pic_unlock(s);
-	kvm_notify_acked_irq(kvm, irq);
+	kvm_notify_acked_irq(kvm, SELECT_PIC(irq), irq);
 
 	return intno;
 }
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 82579ee538d..9f593188129 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -32,6 +32,8 @@
 #include "lapic.h"
 
 #define PIC_NUM_PINS 16
+#define SELECT_PIC(irq) \
+	((irq) < 8 ? KVM_IRQCHIP_PIC_MASTER : KVM_IRQCHIP_PIC_SLAVE)
 
 struct kvm;
 struct kvm_vcpu;
-- 
cgit v1.2.3


From d20626936dd6aa783760e780dae5abb127564316 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 2 Feb 2009 16:23:50 +0100
Subject: x86: Add EFER descriptions for FFXSR

AMD k10 includes support for the FFXSR feature, which leaves out
XMM registers on FXSAVE/FXSAVE when the EFER_FFXSR bit is set in
EFER.

The CPUID feature bit exists already, but the EFER bit is missing
currently, so this patch adds it to the list of known EFER bits.

Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/msr-index.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 46e9646e7a6..f4e505f286b 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -19,12 +19,14 @@
 #define _EFER_LMA		10 /* Long mode active (read-only) */
 #define _EFER_NX		11 /* No execute enable */
 #define _EFER_SVME		12 /* Enable virtualization */
+#define _EFER_FFXSR		14 /* Enable Fast FXSAVE/FXRSTOR */
 
 #define EFER_SCE		(1<<_EFER_SCE)
 #define EFER_LME		(1<<_EFER_LME)
 #define EFER_LMA		(1<<_EFER_LMA)
 #define EFER_NX			(1<<_EFER_NX)
 #define EFER_SVME		(1<<_EFER_SVME)
+#define EFER_FFXSR		(1<<_EFER_FFXSR)
 
 /* Intel MSRs. Some also available on other CPUs */
 #define MSR_IA32_PERFCTR0		0x000000c1
-- 
cgit v1.2.3


From 1b2fd70c4eddef53f32639296818c0253e7ca48d Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 2 Feb 2009 16:23:51 +0100
Subject: KVM: Add FFXSR support

AMD K10 CPUs implement the FFXSR feature that gets enabled using
EFER. Let's check if the virtual CPU description includes that
CPUID feature bit and allow enabling it then.

This is required for Windows Server 2008 in Hyper-V mode.

v2 adds CPUID capability exposure

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c |  3 +++
 arch/x86/kvm/x86.c | 12 ++++++++++++
 2 files changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index db5021b2b5a..1c4a018bf4b 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -417,6 +417,9 @@ static __init int svm_hardware_setup(void)
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
+	if (boot_cpu_has(X86_FEATURE_FXSR_OPT))
+		kvm_enable_efer_bits(EFER_FFXSR);
+
 	if (nested) {
 		printk(KERN_INFO "kvm: Nested Virtualization enabled\n");
 		kvm_enable_efer_bits(EFER_SVME);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 32e3a7ec6ad..8f83590b47d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -490,6 +490,17 @@ static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
 		return;
 	}
 
+	if (efer & EFER_FFXSR) {
+		struct kvm_cpuid_entry2 *feat;
+
+		feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
+		if (!feat || !(feat->edx & bit(X86_FEATURE_FXSR_OPT))) {
+			printk(KERN_DEBUG "set_efer: #GP, enable FFXSR w/o CPUID capability\n");
+			kvm_inject_gp(vcpu, 0);
+			return;
+		}
+	}
+
 	if (efer & EFER_SVME) {
 		struct kvm_cpuid_entry2 *feat;
 
@@ -1240,6 +1251,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 #ifdef CONFIG_X86_64
 		bit(X86_FEATURE_LM) |
 #endif
+		bit(X86_FEATURE_FXSR_OPT) |
 		bit(X86_FEATURE_MMXEXT) |
 		bit(X86_FEATURE_3DNOWEXT) |
 		bit(X86_FEATURE_3DNOW);
-- 
cgit v1.2.3


From 34c33d163fe509da8414a736c6328855f8c164e5 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Sun, 8 Feb 2009 13:28:15 +0100
Subject: KVM: Drop unused evaluations from string pio handlers

Looks like neither the direction nor the rep prefix are used anymore.
Drop related evaluations from SVM's and VMX's I/O exit handlers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 4 +---
 arch/x86/kvm/vmx.c | 4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1c4a018bf4b..22e88a4a51c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1194,7 +1194,7 @@ static int shutdown_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	u32 io_info = svm->vmcb->control.exit_info_1; /* address size bug? */
-	int size, down, in, string, rep;
+	int size, in, string;
 	unsigned port;
 
 	++svm->vcpu.stat.io_exits;
@@ -1213,8 +1213,6 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	in = (io_info & SVM_IOIO_TYPE_MASK) != 0;
 	port = io_info >> 16;
 	size = (io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT;
-	rep = (io_info & SVM_IOIO_REP_MASK) != 0;
-	down = (svm->vmcb->save.rflags & X86_EFLAGS_DF) != 0;
 
 	skip_emulated_instruction(&svm->vcpu);
 	return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index df454de8acf..509b3530540 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2698,7 +2698,7 @@ static int handle_triple_fault(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	unsigned long exit_qualification;
-	int size, down, in, string, rep;
+	int size, in, string;
 	unsigned port;
 
 	++vcpu->stat.io_exits;
@@ -2714,8 +2714,6 @@ static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	size = (exit_qualification & 7) + 1;
 	in = (exit_qualification & 8) != 0;
-	down = (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_DF) != 0;
-	rep = (exit_qualification & 32) != 0;
 	port = exit_qualification >> 16;
 
 	skip_emulated_instruction(vcpu);
-- 
cgit v1.2.3


From 49cd7d2238e44f7ee4269481cd8a1261cc8f93a5 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Wed, 11 Feb 2009 13:50:40 +0800
Subject: KVM: VMX: Use kvm_mmu_page_fault() handle EPT violation mmio

Removed duplicated code.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 30 +-----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 509b3530540..cb27ffccf46 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3058,11 +3058,8 @@ static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	u64 exit_qualification;
-	enum emulation_result er;
 	gpa_t gpa;
-	unsigned long hva;
 	int gla_validity;
-	int r;
 
 	exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
 
@@ -3085,32 +3082,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
-	hva = gfn_to_hva(vcpu->kvm, gpa >> PAGE_SHIFT);
-	if (!kvm_is_error_hva(hva)) {
-		r = kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
-		if (r < 0) {
-			printk(KERN_ERR "EPT: Not enough memory!\n");
-			return -ENOMEM;
-		}
-		return 1;
-	} else {
-		/* must be MMIO */
-		er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
-
-		if (er == EMULATE_FAIL) {
-			printk(KERN_ERR
-			 "EPT: Fail to handle EPT violation vmexit!er is %d\n",
-			 er);
-			printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
-			 (long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
-			 (long unsigned int)vmcs_read64(GUEST_LINEAR_ADDRESS));
-			printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
-				(long unsigned int)exit_qualification);
-			return -ENOTSUPP;
-		} else if (er == EMULATE_DO_MMIO)
-			return 0;
-	}
-	return 1;
+	return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
 }
 
 static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
-- 
cgit v1.2.3


From c807660407a695f390034e402edfe544a1d2e40c Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 4 Feb 2009 17:52:04 +0100
Subject: KVM: Fix kvmclock on !constant_tsc boxes

kvmclock currently falls apart on machines without constant tsc.
This patch fixes it.  Changes:

  * keep tsc frequency in a per-cpu variable.
  * handle kvmclock update using a new request flag, thus checking
    whenever we need an update each time we enter guest context.
  * use a cpufreq notifier to track frequency changes and force
    kvmclock updates.
  * send ipis to kick cpu out of guest context if needed to make
    sure the guest doesn't see stale values.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 103 ++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 94 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8f83590b47d..05d7be89b5e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -36,6 +36,7 @@
 #include <linux/highmem.h>
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
+#include <linux/cpufreq.h>
 
 #include <asm/uaccess.h>
 #include <asm/msr.h>
@@ -617,6 +618,8 @@ static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *
 		 hv_clock->tsc_to_system_mul);
 }
 
+static DEFINE_PER_CPU(unsigned long, cpu_tsc_khz);
+
 static void kvm_write_guest_time(struct kvm_vcpu *v)
 {
 	struct timespec ts;
@@ -627,9 +630,9 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	if ((!vcpu->time_page))
 		return;
 
-	if (unlikely(vcpu->hv_clock_tsc_khz != tsc_khz)) {
-		kvm_set_time_scale(tsc_khz, &vcpu->hv_clock);
-		vcpu->hv_clock_tsc_khz = tsc_khz;
+	if (unlikely(vcpu->hv_clock_tsc_khz != __get_cpu_var(cpu_tsc_khz))) {
+		kvm_set_time_scale(__get_cpu_var(cpu_tsc_khz), &vcpu->hv_clock);
+		vcpu->hv_clock_tsc_khz = __get_cpu_var(cpu_tsc_khz);
 	}
 
 	/* Keep irq disabled to prevent changes to the clock */
@@ -660,6 +663,16 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
 }
 
+static int kvm_request_guest_time_update(struct kvm_vcpu *v)
+{
+	struct kvm_vcpu_arch *vcpu = &v->arch;
+
+	if (!vcpu->time_page)
+		return 0;
+	set_bit(KVM_REQ_KVMCLOCK_UPDATE, &v->requests);
+	return 1;
+}
+
 static bool msr_mtrr_valid(unsigned msr)
 {
 	switch (msr) {
@@ -790,7 +803,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			vcpu->arch.time_page = NULL;
 		}
 
-		kvm_write_guest_time(vcpu);
+		kvm_request_guest_time_update(vcpu);
 		break;
 	}
 	default:
@@ -1000,6 +1013,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_MMU_SHADOW_CACHE_CONTROL:
 	case KVM_CAP_SET_TSS_ADDR:
 	case KVM_CAP_EXT_CPUID:
+	case KVM_CAP_CLOCKSOURCE:
 	case KVM_CAP_PIT:
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
@@ -1025,9 +1039,6 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IOMMU:
 		r = iommu_found();
 		break;
-	case KVM_CAP_CLOCKSOURCE:
-		r = boot_cpu_has(X86_FEATURE_CONSTANT_TSC);
-		break;
 	default:
 		r = 0;
 		break;
@@ -1098,7 +1109,7 @@ out:
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	kvm_x86_ops->vcpu_load(vcpu, cpu);
-	kvm_write_guest_time(vcpu);
+	kvm_request_guest_time_update(vcpu);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
@@ -2642,9 +2653,72 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_pio_string);
 
+static void bounce_off(void *info)
+{
+	/* nothing */
+}
+
+static unsigned int  ref_freq;
+static unsigned long tsc_khz_ref;
+
+static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+				     void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	struct kvm *kvm;
+	struct kvm_vcpu *vcpu;
+	int i, send_ipi = 0;
+
+	if (!ref_freq)
+		ref_freq = freq->old;
+
+	if (val == CPUFREQ_PRECHANGE && freq->old > freq->new)
+		return 0;
+	if (val == CPUFREQ_POSTCHANGE && freq->old < freq->new)
+		return 0;
+	per_cpu(cpu_tsc_khz, freq->cpu) = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
+
+	spin_lock(&kvm_lock);
+	list_for_each_entry(kvm, &vm_list, vm_list) {
+		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+			vcpu = kvm->vcpus[i];
+			if (!vcpu)
+				continue;
+			if (vcpu->cpu != freq->cpu)
+				continue;
+			if (!kvm_request_guest_time_update(vcpu))
+				continue;
+			if (vcpu->cpu != smp_processor_id())
+				send_ipi++;
+		}
+	}
+	spin_unlock(&kvm_lock);
+
+	if (freq->old < freq->new && send_ipi) {
+		/*
+		 * We upscale the frequency.  Must make the guest
+		 * doesn't see old kvmclock values while running with
+		 * the new frequency, otherwise we risk the guest sees
+		 * time go backwards.
+		 *
+		 * In case we update the frequency for another cpu
+		 * (which might be in guest context) send an interrupt
+		 * to kick the cpu out of guest context.  Next time
+		 * guest context is entered kvmclock will be updated,
+		 * so the guest will not see stale values.
+		 */
+		smp_call_function_single(freq->cpu, bounce_off, NULL, 1);
+	}
+	return 0;
+}
+
+static struct notifier_block kvmclock_cpufreq_notifier_block = {
+        .notifier_call  = kvmclock_cpufreq_notifier
+};
+
 int kvm_arch_init(void *opaque)
 {
-	int r;
+	int r, cpu;
 	struct kvm_x86_ops *ops = (struct kvm_x86_ops *)opaque;
 
 	if (kvm_x86_ops) {
@@ -2675,6 +2749,15 @@ int kvm_arch_init(void *opaque)
 	kvm_mmu_set_base_ptes(PT_PRESENT_MASK);
 	kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
 			PT_DIRTY_MASK, PT64_NX_MASK, 0, 0);
+
+	for_each_possible_cpu(cpu)
+		per_cpu(cpu_tsc_khz, cpu) = tsc_khz;
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
+		tsc_khz_ref = tsc_khz;
+		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
+					  CPUFREQ_TRANSITION_NOTIFIER);
+	}
+
 	return 0;
 
 out:
@@ -3010,6 +3093,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	if (vcpu->requests) {
 		if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
 			__kvm_migrate_timers(vcpu);
+		if (test_and_clear_bit(KVM_REQ_KVMCLOCK_UPDATE, &vcpu->requests))
+			kvm_write_guest_time(vcpu);
 		if (test_and_clear_bit(KVM_REQ_MMU_SYNC, &vcpu->requests))
 			kvm_mmu_sync_roots(vcpu);
 		if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests))
-- 
cgit v1.2.3


From 6bed6b9e84bf5e6b468847a50c0751389fdd01d4 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 18 Feb 2009 14:08:59 +0100
Subject: KVM: MMU: remove redundant check in mmu_set_spte

The following code flow is unnecessary:

	if (largepage)
		was_rmapped = is_large_pte(*shadow_pte);
	 else
	 	was_rmapped = 1;

The is_large_pte() function will always evaluate to one here because the
(largepage && !is_large_pte) case is already handled in the first
if-clause. So we can remove this check and set was_rmapped to one always
here.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index ef060ec444a..c90b4b2f2ab 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1791,12 +1791,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 			pgprintk("hfn old %lx new %lx\n",
 				 spte_to_pfn(*shadow_pte), pfn);
 			rmap_remove(vcpu->kvm, shadow_pte);
-		} else {
-			if (largepage)
-				was_rmapped = is_large_pte(*shadow_pte);
-			else
-				was_rmapped = 1;
-		}
+		} else
+			was_rmapped = 1;
 	}
 	if (set_spte(vcpu, shadow_pte, pte_access, user_fault, write_fault,
 		      dirty, largepage, global, gfn, pfn, speculative, true)) {
-- 
cgit v1.2.3


From 452425dbaa1974e9fc489e64a8de46a47b4c2754 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 18 Feb 2009 14:54:37 +0100
Subject: KVM: MMU: remove assertion in kvm_mmu_alloc_page

The assertion no longer makes sense since we don't clear page tables on
allocation; instead we clear them during prefetch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index c90b4b2f2ab..4a21b0f8491 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -802,7 +802,6 @@ static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
 	set_page_private(virt_to_page(sp->spt), (unsigned long)sp);
 	list_add(&sp->link, &vcpu->kvm->arch.active_mmu_pages);
 	INIT_LIST_HEAD(&sp->oos_link);
-	ASSERT(is_empty_shadow_page(sp->spt));
 	bitmap_zero(sp->slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS);
 	sp->multimapped = 0;
 	sp->parent_pte = parent_pte;
-- 
cgit v1.2.3


From 4925663a079c77d95d8685228ad6675fc5639c8e Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Wed, 4 Feb 2009 17:28:14 +0200
Subject: KVM: Report IRQ injection status to userspace.

IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c        | 12 ++++++++++--
 arch/x86/include/asm/kvm_host.h |  2 +-
 arch/x86/kvm/i8259.c            | 18 +++++++++++++-----
 arch/x86/kvm/x86.c              | 13 +++++++++++--
 4 files changed, 35 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 9c77e3939e9..076b00d1dbf 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -182,7 +182,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	switch (ext) {
 	case KVM_CAP_IRQCHIP:
 	case KVM_CAP_MP_STATE:
-
+	case KVM_CAP_IRQ_INJECT_STATUS:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -927,6 +927,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		}
 		break;
+	case KVM_IRQ_LINE_STATUS:
 	case KVM_IRQ_LINE: {
 		struct kvm_irq_level irq_event;
 
@@ -934,10 +935,17 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (copy_from_user(&irq_event, argp, sizeof irq_event))
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
+			__s32 status;
 			mutex_lock(&kvm->lock);
-			kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
+			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
 			mutex_unlock(&kvm->lock);
+			if (ioctl == KVM_IRQ_LINE_STATUS) {
+				irq_event.status = status;
+				if (copy_to_user(argp, &irq_event,
+							sizeof irq_event))
+					goto out;
+			}
 			r = 0;
 		}
 		break;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 55fd4c5fd38..f0faf58044f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -616,7 +616,7 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
 			   u32 error_code);
 
-void kvm_pic_set_irq(void *opaque, int irq, int level);
+int kvm_pic_set_irq(void *opaque, int irq, int level);
 
 void kvm_inject_nmi(struct kvm_vcpu *vcpu);
 
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 93160375c84..b4e662e94dd 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -77,12 +77,13 @@ void kvm_pic_clear_isr_ack(struct kvm *kvm)
 /*
  * set irq level. If an edge is detected, then the IRR is set to 1
  */
-static inline void pic_set_irq1(struct kvm_kpic_state *s, int irq, int level)
+static inline int pic_set_irq1(struct kvm_kpic_state *s, int irq, int level)
 {
-	int mask;
+	int mask, ret = 1;
 	mask = 1 << irq;
 	if (s->elcr & mask)	/* level triggered */
 		if (level) {
+			ret = !(s->irr & mask);
 			s->irr |= mask;
 			s->last_irr |= mask;
 		} else {
@@ -91,11 +92,15 @@ static inline void pic_set_irq1(struct kvm_kpic_state *s, int irq, int level)
 		}
 	else	/* edge triggered */
 		if (level) {
-			if ((s->last_irr & mask) == 0)
+			if ((s->last_irr & mask) == 0) {
+				ret = !(s->irr & mask);
 				s->irr |= mask;
+			}
 			s->last_irr |= mask;
 		} else
 			s->last_irr &= ~mask;
+
+	return (s->imr & mask) ? -1 : ret;
 }
 
 /*
@@ -172,16 +177,19 @@ void kvm_pic_update_irq(struct kvm_pic *s)
 	pic_unlock(s);
 }
 
-void kvm_pic_set_irq(void *opaque, int irq, int level)
+int kvm_pic_set_irq(void *opaque, int irq, int level)
 {
 	struct kvm_pic *s = opaque;
+	int ret = -1;
 
 	pic_lock(s);
 	if (irq >= 0 && irq < PIC_NUM_PINS) {
-		pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
+		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
 		pic_update_irq(s);
 	}
 	pic_unlock(s);
+
+	return ret;
 }
 
 /*
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05d7be89b5e..e4db5be7c95 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1019,6 +1019,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_MP_STATE:
 	case KVM_CAP_SYNC_MMU:
 	case KVM_CAP_REINJECT_CONTROL:
+	case KVM_CAP_IRQ_INJECT_STATUS:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1877,6 +1878,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	create_pit_unlock:
 		mutex_unlock(&kvm->lock);
 		break;
+	case KVM_IRQ_LINE_STATUS:
 	case KVM_IRQ_LINE: {
 		struct kvm_irq_level irq_event;
 
@@ -1884,10 +1886,17 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (copy_from_user(&irq_event, argp, sizeof irq_event))
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
+			__s32 status;
 			mutex_lock(&kvm->lock);
-			kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
-				    irq_event.irq, irq_event.level);
+			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
+					irq_event.irq, irq_event.level);
 			mutex_unlock(&kvm->lock);
+			if (ioctl == KVM_IRQ_LINE_STATUS) {
+				irq_event.status = status;
+				if (copy_to_user(argp, &irq_event,
+							sizeof irq_event))
+					goto out;
+			}
 			r = 0;
 		}
 		break;
-- 
cgit v1.2.3


From 1fbdc7a58512a6283e10fd27108197679db95ffa Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Sun, 11 Jan 2009 22:39:44 +0100
Subject: KVM: SVM: set accessed bit for VMCB segment selectors

In the segment descriptor _cache_ the accessed bit is always set
(although it can be cleared in the descriptor itself). Since Intel
checks for this condition on a VMENTRY, set this bit in the AMD path
to enable cross vendor migration.

Cc: stable@kernel.org
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-By: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 41 +++++++++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 22e88a4a51c..1821c207819 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -796,20 +796,37 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 	var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
 	var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
 
-	/*
-	 * SVM always stores 0 for the 'G' bit in the CS selector in
-	 * the VMCB on a VMEXIT. This hurts cross-vendor migration:
-	 * Intel's VMENTRY has a check on the 'G' bit.
-	 */
-	if (seg == VCPU_SREG_CS)
+	switch (seg) {
+	case VCPU_SREG_CS:
+		/*
+		 * SVM always stores 0 for the 'G' bit in the CS selector in
+		 * the VMCB on a VMEXIT. This hurts cross-vendor migration:
+		 * Intel's VMENTRY has a check on the 'G' bit.
+		 */
 		var->g = s->limit > 0xfffff;
-
-	/*
-	 * Work around a bug where the busy flag in the tr selector
-	 * isn't exposed
-	 */
-	if (seg == VCPU_SREG_TR)
+		break;
+	case VCPU_SREG_TR:
+		/*
+		 * Work around a bug where the busy flag in the tr selector
+		 * isn't exposed
+		 */
 		var->type |= 0x2;
+		break;
+	case VCPU_SREG_DS:
+	case VCPU_SREG_ES:
+	case VCPU_SREG_FS:
+	case VCPU_SREG_GS:
+		/*
+		 * The accessed bit must always be set in the segment
+		 * descriptor cache, although it can be cleared in the
+		 * descriptor, the cached bit always remains at 1. Since
+		 * Intel has a check on this, set it here to support
+		 * cross-vendor migration.
+		 */
+		if (!var->unusable)
+			var->type |= 0x1;
+		break;
+	}
 
 	var->unusable = !var->present;
 }
-- 
cgit v1.2.3


From c5bc22424021cabda862727fb3f5098b866f074d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 19 Feb 2009 12:18:56 +0100
Subject: KVM: MMU: Fix another largepage memory leak

In the paging_fetch function rmap_remove is called after setting a large
pte to non-present. This causes rmap_remove to not drop the reference to
the large page. The result is a memory leak of that page.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/paging_tmpl.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 7314c0944c5..0f11792fafa 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -306,9 +306,9 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			continue;
 
 		if (is_large_pte(*sptep)) {
+			rmap_remove(vcpu->kvm, sptep);
 			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
 			kvm_flush_remote_tlbs(vcpu->kvm);
-			rmap_remove(vcpu->kvm, sptep);
 		}
 
 		if (level == PT_DIRECTORY_LEVEL
-- 
cgit v1.2.3


From b0a1835d53c57bc38b36867c04436b60454cb610 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Tue, 17 Feb 2009 16:52:08 +0800
Subject: KVM: ppc: Add emulation of E500 register mmucsr0

Latest kernel flushes TLB via mmucsr0.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_emulate.c |  8 ++++++++
 arch/powerpc/kvm/e500_tlb.c     | 16 ++++++++++++++++
 arch/powerpc/kvm/e500_tlb.h     |  1 +
 3 files changed, 25 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index 7a98d4a4c1e..3f760414b9f 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -105,6 +105,11 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 	case SPRN_HID1:
 		vcpu_e500->hid1 = vcpu->arch.gpr[rs]; break;
 
+	case SPRN_MMUCSR0:
+		emulated = kvmppc_e500_emul_mt_mmucsr0(vcpu_e500,
+				vcpu->arch.gpr[rs]);
+		break;
+
 	/* extra exceptions */
 	case SPRN_IVOR32:
 		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL] = vcpu->arch.gpr[rs];
@@ -172,6 +177,9 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	case SPRN_HID1:
 		vcpu->arch.gpr[rt] = vcpu_e500->hid1; break;
 
+	case SPRN_MMUCSR0:
+		vcpu->arch.gpr[rt] = 0; break;
+
 	/* extra exceptions */
 	case SPRN_IVOR32:
 		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL];
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index d437160d388..72386ddbd9d 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -391,6 +391,22 @@ static int kvmppc_e500_gtlbe_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
 	return 0;
 }
 
+int kvmppc_e500_emul_mt_mmucsr0(struct kvmppc_vcpu_e500 *vcpu_e500, ulong value)
+{
+	int esel;
+
+	if (value & MMUCSR0_TLB0FI)
+		for (esel = 0; esel < vcpu_e500->guest_tlb_size[0]; esel++)
+			kvmppc_e500_gtlbe_invalidate(vcpu_e500, 0, esel);
+	if (value & MMUCSR0_TLB1FI)
+		for (esel = 0; esel < vcpu_e500->guest_tlb_size[1]; esel++)
+			kvmppc_e500_gtlbe_invalidate(vcpu_e500, 1, esel);
+
+	_tlbil_all();
+
+	return EMULATE_DONE;
+}
+
 int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *vcpu, int ra, int rb)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
index ab49e935518..4d5cc0f7d79 100644
--- a/arch/powerpc/kvm/e500_tlb.h
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -44,6 +44,7 @@
 	   | E500_TLB_USER_PERM_MASK | E500_TLB_SUPER_PERM_MASK)
 
 extern void kvmppc_dump_tlbs(struct kvm_vcpu *);
+extern int kvmppc_e500_emul_mt_mmucsr0(struct kvmppc_vcpu_e500 *, ulong);
 extern int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *);
 extern int kvmppc_e500_emul_tlbre(struct kvm_vcpu *);
 extern int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *, int, int);
-- 
cgit v1.2.3


From 2fa8937f3af8873e006ce324e7b2d3f9b2077b87 Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Mon, 16 Feb 2009 15:14:48 +0800
Subject: ia64: Move the macro definitions related to MSI to one header file.

For kvm's MSI support, it needs these macros defined in ia64_msi.c, and
to avoid duplicate them, move them to one header file and share with
kvm.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/msidef.h | 42 ++++++++++++++++++++++++++++++++
 arch/ia64/kernel/msi_ia64.c    | 55 +++++++-----------------------------------
 2 files changed, 51 insertions(+), 46 deletions(-)
 create mode 100644 arch/ia64/include/asm/msidef.h

(limited to 'arch')

diff --git a/arch/ia64/include/asm/msidef.h b/arch/ia64/include/asm/msidef.h
new file mode 100644
index 00000000000..592c1047a0c
--- /dev/null
+++ b/arch/ia64/include/asm/msidef.h
@@ -0,0 +1,42 @@
+#ifndef _IA64_MSI_DEF_H
+#define _IA64_MSI_DEF_H
+
+/*
+ * Shifts for APIC-based data
+ */
+
+#define     MSI_DATA_VECTOR_SHIFT	0
+#define	    MSI_DATA_VECTOR(v)		(((u8)v) << MSI_DATA_VECTOR_SHIFT)
+#define     MSI_DATA_VECTOR_MASK	0xffffff00
+
+#define     MSI_DATA_DELIVERY_MODE_SHIFT	8
+#define     MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_MODE_SHIFT)
+#define     MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_MODE_SHIFT)
+
+#define     MSI_DATA_LEVEL_SHIFT	14
+#define     MSI_DATA_LEVEL_DEASSERT	(0 << MSI_DATA_LEVEL_SHIFT)
+#define     MSI_DATA_LEVEL_ASSERT	(1 << MSI_DATA_LEVEL_SHIFT)
+
+#define     MSI_DATA_TRIGGER_SHIFT	15
+#define     MSI_DATA_TRIGGER_EDGE	(0 << MSI_DATA_TRIGGER_SHIFT)
+#define     MSI_DATA_TRIGGER_LEVEL	(1 << MSI_DATA_TRIGGER_SHIFT)
+
+/*
+ * Shift/mask fields for APIC-based bus address
+ */
+
+#define     MSI_ADDR_DEST_ID_SHIFT	4
+#define     MSI_ADDR_HEADER		0xfee00000
+
+#define     MSI_ADDR_DEST_ID_MASK	0xfff0000f
+#define     MSI_ADDR_DEST_ID_CPU(cpu)	((cpu) << MSI_ADDR_DEST_ID_SHIFT)
+
+#define     MSI_ADDR_DEST_MODE_SHIFT	2
+#define     MSI_ADDR_DEST_MODE_PHYS	(0 << MSI_ADDR_DEST_MODE_SHIFT)
+#define	    MSI_ADDR_DEST_MODE_LOGIC	(1 << MSI_ADDR_DEST_MODE_SHIFT)
+
+#define     MSI_ADDR_REDIRECTION_SHIFT	3
+#define     MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
+#define     MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
+
+#endif/* _IA64_MSI_DEF_H */
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 89033933903..368ee4e5266 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -7,44 +7,7 @@
 #include <linux/msi.h>
 #include <linux/dmar.h>
 #include <asm/smp.h>
-
-/*
- * Shifts for APIC-based data
- */
-
-#define MSI_DATA_VECTOR_SHIFT		0
-#define	    MSI_DATA_VECTOR(v)		(((u8)v) << MSI_DATA_VECTOR_SHIFT)
-#define MSI_DATA_VECTOR_MASK		0xffffff00
-
-#define MSI_DATA_DELIVERY_SHIFT		8
-#define     MSI_DATA_DELIVERY_FIXED	(0 << MSI_DATA_DELIVERY_SHIFT)
-#define     MSI_DATA_DELIVERY_LOWPRI	(1 << MSI_DATA_DELIVERY_SHIFT)
-
-#define MSI_DATA_LEVEL_SHIFT		14
-#define     MSI_DATA_LEVEL_DEASSERT	(0 << MSI_DATA_LEVEL_SHIFT)
-#define     MSI_DATA_LEVEL_ASSERT	(1 << MSI_DATA_LEVEL_SHIFT)
-
-#define MSI_DATA_TRIGGER_SHIFT		15
-#define     MSI_DATA_TRIGGER_EDGE	(0 << MSI_DATA_TRIGGER_SHIFT)
-#define     MSI_DATA_TRIGGER_LEVEL	(1 << MSI_DATA_TRIGGER_SHIFT)
-
-/*
- * Shift/mask fields for APIC-based bus address
- */
-
-#define MSI_TARGET_CPU_SHIFT		4
-#define MSI_ADDR_HEADER			0xfee00000
-
-#define MSI_ADDR_DESTID_MASK		0xfff0000f
-#define     MSI_ADDR_DESTID_CPU(cpu)	((cpu) << MSI_TARGET_CPU_SHIFT)
-
-#define MSI_ADDR_DESTMODE_SHIFT		2
-#define     MSI_ADDR_DESTMODE_PHYS	(0 << MSI_ADDR_DESTMODE_SHIFT)
-#define	    MSI_ADDR_DESTMODE_LOGIC	(1 << MSI_ADDR_DESTMODE_SHIFT)
-
-#define MSI_ADDR_REDIRECTION_SHIFT	3
-#define     MSI_ADDR_REDIRECTION_CPU	(0 << MSI_ADDR_REDIRECTION_SHIFT)
-#define     MSI_ADDR_REDIRECTION_LOWPRI	(1 << MSI_ADDR_REDIRECTION_SHIFT)
+#include <asm/msidef.h>
 
 static struct irq_chip	ia64_msi_chip;
 
@@ -65,8 +28,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 	read_msi_msg(irq, &msg);
 
 	addr = msg.address_lo;
-	addr &= MSI_ADDR_DESTID_MASK;
-	addr |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu));
+	addr &= MSI_ADDR_DEST_ID_MASK;
+	addr |= MSI_ADDR_DEST_ID_CPU(cpu_physical_id(cpu));
 	msg.address_lo = addr;
 
 	data = msg.data;
@@ -98,9 +61,9 @@ int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	msg.address_hi = 0;
 	msg.address_lo =
 		MSI_ADDR_HEADER |
-		MSI_ADDR_DESTMODE_PHYS |
+		MSI_ADDR_DEST_MODE_PHYS |
 		MSI_ADDR_REDIRECTION_CPU |
-		MSI_ADDR_DESTID_CPU(dest_phys_id);
+		MSI_ADDR_DEST_ID_CPU(dest_phys_id);
 
 	msg.data =
 		MSI_DATA_TRIGGER_EDGE |
@@ -183,8 +146,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	msg.data &= ~MSI_DATA_VECTOR_MASK;
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DESTID_MASK;
-	msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu));
+	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+	msg.address_lo |= MSI_ADDR_DEST_ID_CPU(cpu_physical_id(cpu));
 
 	dmar_msi_write(irq, &msg);
 	irq_desc[irq].affinity = *mask;
@@ -215,9 +178,9 @@ msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
 	msg->address_hi = 0;
 	msg->address_lo =
 		MSI_ADDR_HEADER |
-		MSI_ADDR_DESTMODE_PHYS |
+		MSI_ADDR_DEST_MODE_PHYS |
 		MSI_ADDR_REDIRECTION_CPU |
-		MSI_ADDR_DESTID_CPU(dest);
+		MSI_ADDR_DEST_ID_CPU(dest);
 
 	msg->data =
 		MSI_DATA_TRIGGER_EDGE |
-- 
cgit v1.2.3


From 6b08035f3e64d8e474be166d682b52c95941662e Mon Sep 17 00:00:00 2001
From: Xiantao Zhang <xiantao.zhang@intel.com>
Date: Mon, 16 Feb 2009 15:24:05 +0800
Subject: KVM: ia64: Fix the build errors due to lack of macros related to MSI.

Include the newly introduced msidef.h to solve the build issues.

Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/irq.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kvm/irq.h b/arch/ia64/kvm/irq.h
index c6786e8b1bf..c0785a72827 100644
--- a/arch/ia64/kvm/irq.h
+++ b/arch/ia64/kvm/irq.h
@@ -23,6 +23,8 @@
 #ifndef __IRQ_H
 #define __IRQ_H
 
+#include "lapic.h"
+
 static inline int irqchip_in_kernel(struct kvm *kvm)
 {
 	return 1;
-- 
cgit v1.2.3


From 401d10dee083bda281f2fdcdf654080313ba30ec Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Fri, 20 Feb 2009 22:53:37 +0530
Subject: KVM: VMX: Update necessary state when guest enters long mode

setup_msrs() should be called when entering long mode to save the
shadow state for the 64-bit guest state.

Using vmx_set_efer() in enter_lmode() removes some duplicated code
and also ensures we call setup_msrs(). We can safely pass the value
of shadow_efer to vmx_set_efer() as no other bits in the efer change
while enabling long mode (guest first sets EFER.LME, then sets CR0.PG
which causes a vmexit where we activate long mode).

With this fix, is_long_mode() can check for EFER.LMA set instead of
EFER.LME and 5e23049e86dd298b72e206b420513dbc3a240cd9 can be reverted.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 54 ++++++++++++++++++++++++------------------------------
 1 file changed, 24 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index cb27ffccf46..48063a0aa24 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1430,6 +1430,29 @@ continue_rmode:
 	init_rmode(vcpu->kvm);
 }
 
+static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	struct kvm_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
+
+	vcpu->arch.shadow_efer = efer;
+	if (!msr)
+		return;
+	if (efer & EFER_LMA) {
+		vmcs_write32(VM_ENTRY_CONTROLS,
+			     vmcs_read32(VM_ENTRY_CONTROLS) |
+			     VM_ENTRY_IA32E_MODE);
+		msr->data = efer;
+	} else {
+		vmcs_write32(VM_ENTRY_CONTROLS,
+			     vmcs_read32(VM_ENTRY_CONTROLS) &
+			     ~VM_ENTRY_IA32E_MODE);
+
+		msr->data = efer & ~EFER_LME;
+	}
+	setup_msrs(vmx);
+}
+
 #ifdef CONFIG_X86_64
 
 static void enter_lmode(struct kvm_vcpu *vcpu)
@@ -1444,13 +1467,8 @@ static void enter_lmode(struct kvm_vcpu *vcpu)
 			     (guest_tr_ar & ~AR_TYPE_MASK)
 			     | AR_TYPE_BUSY_64_TSS);
 	}
-
 	vcpu->arch.shadow_efer |= EFER_LMA;
-
-	find_msr_entry(to_vmx(vcpu), MSR_EFER)->data |= EFER_LMA | EFER_LME;
-	vmcs_write32(VM_ENTRY_CONTROLS,
-		     vmcs_read32(VM_ENTRY_CONTROLS)
-		     | VM_ENTRY_IA32E_MODE);
+	vmx_set_efer(vcpu, vcpu->arch.shadow_efer);
 }
 
 static void exit_lmode(struct kvm_vcpu *vcpu)
@@ -1609,30 +1627,6 @@ static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	vmcs_writel(GUEST_CR4, hw_cr4);
 }
 
-static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
-
-	vcpu->arch.shadow_efer = efer;
-	if (!msr)
-		return;
-	if (efer & EFER_LMA) {
-		vmcs_write32(VM_ENTRY_CONTROLS,
-				     vmcs_read32(VM_ENTRY_CONTROLS) |
-				     VM_ENTRY_IA32E_MODE);
-		msr->data = efer;
-
-	} else {
-		vmcs_write32(VM_ENTRY_CONTROLS,
-				     vmcs_read32(VM_ENTRY_CONTROLS) &
-				     ~VM_ENTRY_IA32E_MODE);
-
-		msr->data = efer & ~EFER_LME;
-	}
-	setup_msrs(vmx);
-}
-
 static u64 vmx_get_segment_base(struct kvm_vcpu *vcpu, int seg)
 {
 	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
-- 
cgit v1.2.3


From 41d6af119206e98764b4ae6d264d63acefcf851e Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@qumranet.com>
Date: Thu, 28 Feb 2008 16:06:15 +0530
Subject: KVM: is_long_mode() should check for EFER.LMA

is_long_mode currently checks the LongModeEnable bit in
EFER instead of the LongModeActive bit. This is wrong, but
we survived this till now since it wasn't triggered. This
breaks guests that go from long mode to compatibility mode.

This is noticed on a solaris guest and fixes bug #1842160

Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/mmu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 258e5d56298..eaab2145f62 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -54,7 +54,7 @@ static inline int kvm_mmu_reload(struct kvm_vcpu *vcpu)
 static inline int is_long_mode(struct kvm_vcpu *vcpu)
 {
 #ifdef CONFIG_X86_64
-	return vcpu->arch.shadow_efer & EFER_LME;
+	return vcpu->arch.shadow_efer & EFER_LMA;
 #else
 	return 0;
 #endif
-- 
cgit v1.2.3


From d7364a29b305862cbc92b3f8b6ad9968270d068c Mon Sep 17 00:00:00 2001
From: Hannes Eder <hannes@hanneseder.net>
Date: Sat, 21 Feb 2009 02:18:13 +0100
Subject: KVM: fix sparse warnings: context imbalance

Impact: Attribute function with __acquires(...) resp. __releases(...).

Fix this sparse warnings:
  arch/x86/kvm/i8259.c:34:13: warning: context imbalance in 'pic_lock' - wrong count at exit
  arch/x86/kvm/i8259.c:39:13: warning: context imbalance in 'pic_unlock' - unexpected unlock

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index b4e662e94dd..1ccb50c74f1 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -32,11 +32,13 @@
 #include <linux/kvm_host.h>
 
 static void pic_lock(struct kvm_pic *s)
+	__acquires(&s->lock)
 {
 	spin_lock(&s->lock);
 }
 
 static void pic_unlock(struct kvm_pic *s)
+	__releases(&s->lock)
 {
 	struct kvm *kvm = s->kvm;
 	unsigned acks = s->pending_acks;
-- 
cgit v1.2.3


From cded19f396bc3c9d299331709d0a9fbc6ecc148a Mon Sep 17 00:00:00 2001
From: Hannes Eder <hannes@hanneseder.net>
Date: Sat, 21 Feb 2009 02:19:13 +0100
Subject: KVM: fix sparse warnings: Should it be static?

Impact: Make symbols static.

Fix this sparse warnings:
  arch/x86/kvm/mmu.c:992:5: warning: symbol 'mmu_pages_add' was not declared. Should it be static?
  arch/x86/kvm/mmu.c:1124:5: warning: symbol 'mmu_pages_next' was not declared. Should it be static?
  arch/x86/kvm/mmu.c:1144:6: warning: symbol 'mmu_pages_clear_parents' was not declared. Should it be static?
  arch/x86/kvm/x86.c:2037:5: warning: symbol 'kvm_read_guest_virt' was not declared. Should it be static?
  arch/x86/kvm/x86.c:2067:5: warning: symbol 'kvm_write_guest_virt' was not declared. Should it be static?
  virt/kvm/irq_comm.c:220:5: warning: symbol 'setup_routing_entry' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 11 ++++++-----
 arch/x86/kvm/x86.c |  8 ++++----
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 4a21b0f8491..2a36f7f7c4c 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -989,8 +989,8 @@ struct kvm_mmu_pages {
 	     idx < 512;					\
 	     idx = find_next_bit(bitmap, 512, idx+1))
 
-int mmu_pages_add(struct kvm_mmu_pages *pvec, struct kvm_mmu_page *sp,
-		   int idx)
+static int mmu_pages_add(struct kvm_mmu_pages *pvec, struct kvm_mmu_page *sp,
+			 int idx)
 {
 	int i;
 
@@ -1121,8 +1121,9 @@ struct mmu_page_path {
 			i < pvec.nr && ({ sp = pvec.page[i].sp; 1;});	\
 			i = mmu_pages_next(&pvec, &parents, i))
 
-int mmu_pages_next(struct kvm_mmu_pages *pvec, struct mmu_page_path *parents,
-		   int i)
+static int mmu_pages_next(struct kvm_mmu_pages *pvec,
+			  struct mmu_page_path *parents,
+			  int i)
 {
 	int n;
 
@@ -1141,7 +1142,7 @@ int mmu_pages_next(struct kvm_mmu_pages *pvec, struct mmu_page_path *parents,
 	return n;
 }
 
-void mmu_pages_clear_parents(struct mmu_page_path *parents)
+static void mmu_pages_clear_parents(struct mmu_page_path *parents)
 {
 	struct kvm_mmu_page *sp;
 	unsigned int level = 0;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e4db5be7c95..8ca100a9eca 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2043,8 +2043,8 @@ static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
 	return dev;
 }
 
-int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
-			struct kvm_vcpu *vcpu)
+static int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
+			       struct kvm_vcpu *vcpu)
 {
 	void *data = val;
 	int r = X86EMUL_CONTINUE;
@@ -2073,8 +2073,8 @@ out:
 	return r;
 }
 
-int kvm_write_guest_virt(gva_t addr, void *val, unsigned int bytes,
-			 struct kvm_vcpu *vcpu)
+static int kvm_write_guest_virt(gva_t addr, void *val, unsigned int bytes,
+				struct kvm_vcpu *vcpu)
 {
 	void *data = val;
 	int r = X86EMUL_CONTINUE;
-- 
cgit v1.2.3


From 4539b35881ae9664b0e2953438dd83f5ee02c0b4 Mon Sep 17 00:00:00 2001
From: Andrea Arcangeli <aarcange@redhat.com>
Date: Thu, 12 Mar 2009 18:18:43 +0100
Subject: KVM: Fix missing smp tlb flush in invlpg

When kvm emulates an invlpg instruction, it can drop a shadow pte, but
leaves the guest tlbs intact.  This can cause memory corruption when
swapping out.

Without this the other cpu can still write to a freed host physical page.
tlb smp flush must happen if rmap_remove is called always before mmu_lock
is released because the VM will take the mmu_lock before it can finally add
the page to the freelist after swapout. mmu notifier makes it safe to flush
the tlb after freeing the page (otherwise it would never be safe) so we can do
a single flush for multiple sptes invalidated.

Cc: stable@kernel.org
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/paging_tmpl.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 0f11792fafa..6bd70206c56 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -446,6 +446,7 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 	gpa_t pte_gpa = -1;
 	int level;
 	u64 *sptep;
+	int need_flush = 0;
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 
@@ -465,6 +466,7 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 				rmap_remove(vcpu->kvm, sptep);
 				if (is_large_pte(*sptep))
 					--vcpu->kvm->stat.lpages;
+				need_flush = 1;
 			}
 			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
 			break;
@@ -474,6 +476,8 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 			break;
 	}
 
+	if (need_flush)
+		kvm_flush_remote_tlbs(vcpu->kvm);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	if (pte_gpa == -1)
-- 
cgit v1.2.3


From bc35cbc85cd78213590761618a13da6a9707652c Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Tue, 17 Mar 2009 16:57:45 +0800
Subject: KVM: ppc: e500: Fix the bug that mas0 update to wrong value when read
 TLB entry

Should clear and then update the next victim area here.

Guest kernel only read TLB1 when startup kernel,
this bug result in an extra 4K TLB1 mapping in guest from 0x0 to 0x0.

As the problem has no impact to bootup a guest,
we didn't notice it before.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_tlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index 72386ddbd9d..ec933209e8a 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -448,7 +448,7 @@ int kvmppc_e500_emul_tlbre(struct kvm_vcpu *vcpu)
 	esel = get_tlb_esel(vcpu_e500, tlbsel);
 
 	gtlbe = &vcpu_e500->guest_tlb[tlbsel][esel];
-	vcpu_e500->mas0 &= MAS0_NV(0);
+	vcpu_e500->mas0 &= ~MAS0_NV(~0);
 	vcpu_e500->mas0 |= MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
 	vcpu_e500->mas1 = gtlbe->mas1;
 	vcpu_e500->mas2 = gtlbe->mas2;
-- 
cgit v1.2.3


From 046a48b35baa7c66d0d0331256ba12ca51665411 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Tue, 17 Mar 2009 16:57:46 +0800
Subject: KVM: ppc: e500: Fix the bug that KVM is unstable in SMP

TLB entry should enable memory coherence in SMP.

And like commit 631fba9dd3aca519355322cef035730609e91593,
remove guard attribute to enable the prefetch of guest memory.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_tlb.c | 4 ++++
 arch/powerpc/kvm/e500_tlb.h | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index ec933209e8a..0e773fc2d5e 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -99,7 +99,11 @@ static inline u32 e500_shadow_mas3_attrib(u32 mas3, int usermode)
 
 static inline u32 e500_shadow_mas2_attrib(u32 mas2, int usermode)
 {
+#ifdef CONFIG_SMP
+	return (mas2 & MAS2_ATTRIB_MASK) | MAS2_M;
+#else
 	return mas2 & MAS2_ATTRIB_MASK;
+#endif
 }
 
 /*
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
index 4d5cc0f7d79..45b064b7690 100644
--- a/arch/powerpc/kvm/e500_tlb.h
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -38,7 +38,7 @@
 #define E500_TLB_USER_PERM_MASK (MAS3_UX|MAS3_UR|MAS3_UW)
 #define E500_TLB_SUPER_PERM_MASK (MAS3_SX|MAS3_SR|MAS3_SW)
 #define MAS2_ATTRIB_MASK \
-	  (MAS2_X0 | MAS2_X1 | MAS2_W | MAS2_I | MAS2_M | MAS2_G | MAS2_E)
+	  (MAS2_X0 | MAS2_X1)
 #define MAS3_ATTRIB_MASK \
 	  (MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3 \
 	   | E500_TLB_USER_PERM_MASK | E500_TLB_SUPER_PERM_MASK)
-- 
cgit v1.2.3


From 16175a796d061833aacfbd9672235f2d2725df65 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 23 Mar 2009 22:13:44 +0200
Subject: KVM: VMX: Don't allow uninhibited access to EFER on i386

vmx_set_msr() does not allow i386 guests to touch EFER, but they can still
do so through the default: label in the switch.  If they set EFER_LME, they
can oops the host.

Fix by having EFER access through the normal channel (which will check for
EFER_LME) even on i386.

Reported-and-tested-by: Benjamin Gilbert <bgilbert@cs.cmu.edu>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 48063a0aa24..bb481330716 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -936,11 +936,11 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	int ret = 0;
 
 	switch (msr_index) {
-#ifdef CONFIG_X86_64
 	case MSR_EFER:
 		vmx_load_host_state(vmx);
 		ret = kvm_set_msr_common(vcpu, msr_index, data);
 		break;
+#ifdef CONFIG_X86_64
 	case MSR_FS_BASE:
 		vmcs_writel(GUEST_FS_BASE, data);
 		break;
-- 
cgit v1.2.3


From b23c7a427e4b3764ad686a46de89ab652811c50a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Mon, 23 Mar 2009 10:44:07 +0000
Subject: [ARM] fix leak in iop13xx/pci
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Another leak found by Daniel Marjamäki

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-iop13xx/pci.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 673b0db2203..4873f26a42e 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -1026,8 +1026,10 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 		which_atu = 0;
 	}
 
-	if (!which_atu)
+	if (!which_atu) {
+		kfree(res);
 		return 0;
+	}
 
 	switch(which_atu) {
 	case IOP13XX_INIT_ATU_ATUX:
@@ -1074,6 +1076,7 @@ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
 		sys->map_irq = iop13xx_pcie_map_irq;
 		break;
 	default:
+		kfree(res);
 		return 0;
 	}
 
-- 
cgit v1.2.3


From 803c78e4da28d7d7cb0642caf643b9289ae7838a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Mon, 23 Mar 2009 10:43:54 +0000
Subject: [ARM] twl4030 - leak fix
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Trivial error path leak fix. Problem found by Daniel Marjamäki using
cppcheck

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 437f52073f6..e1dadf7344a 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -397,6 +397,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			kfree(mmc);
 			continue;
 		}
 		hsmmc_data[c->mmc - 1] = mmc;
-- 
cgit v1.2.3


From 49121aa14c2a372a5fd01982df900257784be63d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 7 Mar 2009 11:44:21 +0000
Subject: USB: S3C: Move usb-control.h to platform include

The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX
architectures, so move it to <plat/usb-control.h>

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/arm/mach-s3c2410/include/mach/usb-control.h | 41 ------------------------
 arch/arm/mach-s3c2410/usb-simtec.c               |  3 +-
 arch/arm/plat-s3c/include/plat/usb-control.h     | 41 ++++++++++++++++++++++++
 3 files changed, 43 insertions(+), 42 deletions(-)
 delete mode 100644 arch/arm/mach-s3c2410/include/mach/usb-control.h
 create mode 100644 arch/arm/plat-s3c/include/plat/usb-control.h

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
deleted file mode 100644
index cd91d1591f3..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/usb-control.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - usb port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6078f09b7df..8331e8d97e2 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -29,13 +29,14 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/usb-control.h>
 #include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/usb-control.h>
 #include <plat/devs.h>
+
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h
new file mode 100644
index 00000000000..822c87fe948
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/usb-control.h
@@ -0,0 +1,41 @@
+/* arch/arm/plat-s3c/include/plat/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB host port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
-- 
cgit v1.2.3


From 54ca5412b5576fdb0a4ea4fedf6565bd6f34150c Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 26 Jan 2009 09:12:12 -0800
Subject: PS3: replace bus_id usage

These simple debug statments should be using dev_dbg() instead of
accessing bus_id directly (or they should use device_name).

As bus_id is going away, this patch is necessary.

Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/powerpc/platforms/ps3/system-bus.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 58311a86785..a705fffbb49 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -376,7 +376,7 @@ static int ps3_system_bus_probe(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	dev_dbg(_dev, "%s:%d\n", __func__, __LINE__);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -398,7 +398,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	dev_dbg(_dev, "%s:%d\n", __func__, __LINE__);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
-- 
cgit v1.2.3


From 7a192ec334cab9fafe3a8665a65af398b0e24730 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 6 Feb 2009 23:40:12 +0800
Subject: platform driver: fix incorrect use of 'platform_bus_type' with
 'struct device_driver'

This patch fixes the bug reported in
	http://bugzilla.kernel.org/show_bug.cgi?id=11681.

"Lots of device drivers register a 'struct device_driver' with
the '.bus' member set to '&platform_bus_type'. This is wrong,
since the platform_bus functions expect the 'struct device_driver'
to be wrapped up in a 'struct platform_driver' which provides
some additional callbacks (like suspend_late, resume_early).
The effect may be that platform_suspend_late() uses bogus data
outside the device_driver struct as a pointer pointer to the
device driver's suspend_late() function or other hard to
reproduce failures."(Lothar Wassmann)

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/mips/basler/excite/excite_iodev.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index a1e3526b4a9..dfbfd7e2ac0 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -33,8 +33,8 @@
 
 
 static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
-static int __init iodev_probe(struct device *);
-static int __exit iodev_remove(struct device *);
+static int __init iodev_probe(struct platform_device *);
+static int __exit iodev_remove(struct platform_device *);
 static int iodev_open(struct inode *, struct file *);
 static int iodev_release(struct inode *, struct file *);
 static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
@@ -65,13 +65,13 @@ static struct miscdevice miscdev =
 	.fops		= &fops
 };
 
-static struct device_driver iodev_driver =
-{
-	.name		= (char *) iodev_name,
-	.bus		= &platform_bus_type,
-	.owner		= THIS_MODULE,
+static struct platform_driver iodev_driver = {
+	.driver = {
+		.name		= iodev_name,
+		.owner		= THIS_MODULE,
+	},
 	.probe		= iodev_probe,
-	.remove		= __exit_p(iodev_remove)
+	.remove		= __devexit_p(iodev_remove),
 };
 
 
@@ -89,11 +89,10 @@ iodev_get_resource(struct platform_device *pdv, const char *name,
 
 
 /* No hotplugging on the platform bus - use __init */
-static int __init iodev_probe(struct device *dev)
+static int __init iodev_probe(struct platform_device *dev)
 {
-	struct platform_device * const pdv = to_platform_device(dev);
 	const struct resource * const ri =
-		iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
+		iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
 
 	if (unlikely(!ri))
 		return -ENXIO;
@@ -104,7 +103,7 @@ static int __init iodev_probe(struct device *dev)
 
 
 
-static int __exit iodev_remove(struct device *dev)
+static int __exit iodev_remove(struct platform_device *dev)
 {
 	return misc_deregister(&miscdev);
 }
@@ -160,14 +159,14 @@ static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
 
 static int __init iodev_init_module(void)
 {
-	return driver_register(&iodev_driver);
+	return platform_driver_register(&iodev_driver);
 }
 
 
 
 static void __exit iodev_cleanup_module(void)
 {
-	driver_unregister(&iodev_driver);
+	platform_driver_unregister(&iodev_driver);
 }
 
 module_init(iodev_init_module);
-- 
cgit v1.2.3


From bba7d0b9ba0f04d25145de8170a17a3a07bbfdde Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Wed, 25 Mar 2009 10:58:47 +0200
Subject: ARM: tlbflush.h: introduce TLB_BTB flag

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
---
 arch/arm/include/asm/tlbflush.h | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index b543a054a17..ffedd2494ea 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -39,6 +39,7 @@
 #define TLB_V6_D_ASID	(1 << 17)
 #define TLB_V6_I_ASID	(1 << 18)
 
+#define TLB_BTB		(1 << 28)
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -140,7 +141,7 @@
 # define v4wb_always_flags	(-1UL)
 #endif
 
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
 			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
 			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
 			 TLB_V6_I_ASID | TLB_V6_D_ASID)
@@ -297,9 +298,7 @@ static inline void local_flush_tlb_all(void)
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
@@ -334,9 +333,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
 
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
@@ -374,9 +371,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
 
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
@@ -411,9 +406,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
 
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
-- 
cgit v1.2.3


From 9e058d4f57751daa008b764735f97fdfccfeab6c Mon Sep 17 00:00:00 2001
From: Thomas Reitmayr <treitmayr@devbase.at>
Date: Tue, 24 Feb 2009 14:59:22 -0800
Subject: [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as
 platform data

The orion5x-wdt driver is now registered as a platform device and
receives the tclk value as platform data. This fixes a compile issue
cause by a previously removed define "ORION5X_TCLK".

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Kristof Provost <kristof@sigsegv.be>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Kunihiko IMAI <bak@d2.dion.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 arch/arm/mach-orion5x/common.c                 | 29 ++++++++++++++++++++++++++
 arch/arm/plat-orion/include/plat/orion5x_wdt.h | 18 ++++++++++++++++
 2 files changed, 47 insertions(+)
 create mode 100644 arch/arm/plat-orion/include/plat/orion5x_wdt.h

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 8a0e49d8425..1a1df24f419 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -31,6 +31,7 @@
 #include <plat/ehci-orion.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
+#include <plat/orion5x_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -532,6 +533,29 @@ void __init orion5x_xor_init(void)
 }
 
 
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+	.tclk			= 0,
+};
+
+static struct platform_device orion5x_wdt_device = {
+	.name		= "orion5x_wdt",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &orion5x_wdt_data,
+	},
+	.num_resources	= 0,
+};
+
+void __init orion5x_wdt_init(void)
+{
+	orion5x_wdt_data.tclk = orion5x_tclk;
+	platform_device_register(&orion5x_wdt_device);
+}
+
+
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
@@ -631,6 +655,11 @@ void __init orion5x_init(void)
 		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
 		disable_hlt();
 	}
+
+	/*
+	 * Register watchdog driver
+	 */
+	orion5x_wdt_init();
 }
 
 /*
diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion5x_wdt.h
new file mode 100644
index 00000000000..3c9cf6a305e
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/orion5x_wdt.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_ORION5X_WDT_H
+#define __PLAT_ORION5X_WDT_H
+
+struct orion5x_wdt_platform_data {
+	u32	tclk;		/* no <linux/clk.h> support yet */
+};
+
+
+#endif
+
-- 
cgit v1.2.3


From 224be092d116b663ac426c4615e34ee54bab4a14 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 25 Mar 2009 10:14:25 +0100
Subject: [ARM] 5429/1: collie: start scoop converton to new api

Start converting scoop gpio access to new API instead of old
deprecated one.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/collie.c              | 27 ++++++++++++++++++++++-----
 arch/arm/mach-sa1100/include/mach/collie.h |  7 ++++---
 2 files changed, 26 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2052eb88c96..a911f44aa9f 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -195,18 +196,34 @@ static struct mtd_partition collie_partitions[] = {
 	}
 };
 
+static int collie_flash_init(void)
+{
+	int rc;
+	rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+	if (rc)
+		return rc;
+
+	rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
+	if (rc)
+		gpio_free(COLLIE_GPIO_VPEN);
+
+	return rc;
+}
+
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
-	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
-	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+	gpio_set_value(COLLIE_GPIO_VPEN, vpp);
 }
 
+static void collie_flash_exit(void)
+{
+	gpio_free(COLLIE_GPIO_VPEN);
+}
 static struct flash_platform_data collie_flash_data = {
 	.map_name	= "cfi_probe",
+	.init		= collie_flash_init,
 	.set_vpp	= collie_set_vpp,
+	.exit		= collie_flash_exit,
 	.parts		= collie_partitions,
 	.nr_parts	= ARRAY_SIZE(collie_partitions),
 };
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 69e962416e3..9bc53497d35 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -14,6 +14,7 @@
 #define __ASM_ARCH_COLLIE_H
 
 
+#define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
 #define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
 #define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
 #define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
@@ -21,13 +22,13 @@
 #define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
 #define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
 #define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
 #define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
-				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
 				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
 				COLLIE_SCP_CHARGE_ON )
 
 /* GPIOs for which the generic definition doesn't say much */
-- 
cgit v1.2.3


From 8cb52f788c73cfcbff4aca66063c55baa3e6d313 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 25 Mar 2009 10:15:28 +0100
Subject: [ARM] 5430/1: collie_pm: use new GPIO API to control charger

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/collie_pm.c           | 12 +++++-------
 arch/arm/mach-sa1100/include/mach/collie.h |  7 +++----
 2 files changed, 8 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index b39307f26b5..444f266ecc0 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -58,6 +59,9 @@ static void collie_charger_init(void)
 		return;
 	}
 
+	gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
+	gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
+
 	ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
 			           COLLIE_TC35143_GPIO_BBAT_ON);
 	return;
@@ -73,17 +77,11 @@ static void collie_measure_temp(int on)
 
 static void collie_charge(int on)
 {
-	extern struct platform_device colliescoop_device;
-
 	/* Zaurus seems to contain LTC1731; it should know when to
 	 * stop charging itself, so setting charge on should be
 	 * relatively harmless (as long as it is not done too often).
 	 */
-	if (on) {
-		set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
-	} else {
-		reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
-	}
+	gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
 }
 
 static void collie_discharge(int on)
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9bc53497d35..9efb569cdb6 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -15,7 +15,7 @@
 
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
-#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
 #define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
 #define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
 #define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
@@ -25,11 +25,10 @@
 #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
 				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
 				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
-				COLLIE_SCP_CHARGE_ON )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
 
 /* GPIOs for which the generic definition doesn't say much */
 
-- 
cgit v1.2.3


From 17a92a788e3cebca8a817f01e3c0f121f700ee0e Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Wed, 25 Mar 2009 10:16:37 +0100
Subject: [ARM] 5431/1: scoop: completely drop old-style SCOOP GPIO accessors

Now, as all places that use Scoop GPIO have been converted to use
GPIO API, drop old-style accessors completely.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/scoop.c               | 31 -------------------------------
 arch/arm/include/asm/hardware/scoop.h |  2 --
 2 files changed, 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 697c6491399..7713a08bb10 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -124,37 +124,6 @@ static int scoop_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
-unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
-{
-	unsigned short gpio_bit;
-	unsigned long flag;
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
-	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
-	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
-	return gpio_bit;
-}
-
-unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
-{
-	unsigned short gpio_bit;
-	unsigned long flag;
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
-	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
-	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
-	return gpio_bit;
-}
-
-EXPORT_SYMBOL(set_scoop_gpio);
-EXPORT_SYMBOL(reset_scoop_gpio);
-
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index dfb8330599f..46492a63a7c 100644
--- a/arch/arm/include/asm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -63,7 +63,5 @@ struct scoop_pcmcia_config {
 extern struct scoop_pcmcia_config *platform_scoop_config;
 
 void reset_scoop(struct device *dev);
-unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
 void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
-- 
cgit v1.2.3


From e63cedb656683739eea2696114bc56888e9bff05 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 25 Mar 2009 10:15:00 +0000
Subject: [ARM] collie: fix two minor formatting nits

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/collie.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index a911f44aa9f..bbf2ebcc306 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -146,7 +146,8 @@ static struct locomo_driver collie_uart_driver = {
 	.remove	= collie_uart_remove,
 };
 
-static int __init collie_uart_init(void) {
+static int __init collie_uart_init(void)
+{
 	return locomo_driver_register(&collie_uart_driver);
 }
 device_initcall(collie_uart_init);
@@ -198,8 +199,7 @@ static struct mtd_partition collie_partitions[] = {
 
 static int collie_flash_init(void)
 {
-	int rc;
-	rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+	int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
 	if (rc)
 		return rc;
 
@@ -219,6 +219,7 @@ static void collie_flash_exit(void)
 {
 	gpio_free(COLLIE_GPIO_VPEN);
 }
+
 static struct flash_platform_data collie_flash_data = {
 	.map_name	= "cfi_probe",
 	.init		= collie_flash_init,
-- 
cgit v1.2.3


From 997302259f386bca8fe1db67c50296ca426c438f Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 25 Mar 2009 10:21:35 +0000
Subject: [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to
 linux/io.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/board-ldp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 73e3fdb2d20..c71580557c6 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -35,7 +36,6 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 
-#include <asm/io.h>
 #include <asm/delay.h>
 #include <mach/control.h>
 
-- 
cgit v1.2.3


From 28853ac8fe5221de74a14f1182d7b2b383dfd85c Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Wed, 25 Mar 2009 13:10:01 +0200
Subject: ARM: Add support for FA526 v2

Adds support for Faraday FA526 core. This core is used at least by:
Cortina Systems Gemini and Centroid family
Cavium Networks ECONA family
Grain Media GM8120
Pixelplus ImageARM
Prolific PL-1029
Faraday IP evaluation boards

v2:
- move TLB_BTB to separate patch
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
---
 arch/arm/Makefile                 |   1 +
 arch/arm/boot/compressed/head.S   |  26 ++++
 arch/arm/include/asm/cacheflush.h |   8 ++
 arch/arm/include/asm/page.h       |   8 ++
 arch/arm/include/asm/proc-fns.h   |   8 ++
 arch/arm/include/asm/system.h     |   6 +
 arch/arm/include/asm/tlbflush.h   |  19 +++
 arch/arm/mm/Kconfig               |  35 +++++-
 arch/arm/mm/Makefile              |   4 +
 arch/arm/mm/cache-fa.S            | 220 +++++++++++++++++++++++++++++++++
 arch/arm/mm/copypage-fa.c         |  86 +++++++++++++
 arch/arm/mm/proc-fa526.S          | 248 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mm/tlb-fa.S              |  75 ++++++++++++
 13 files changed, 742 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mm/cache-fa.S
 create mode 100644 arch/arm/mm/copypage-fa.c
 create mode 100644 arch/arm/mm/proc-fa526.S
 create mode 100644 arch/arm/mm/tlb-fa.S

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 24e0f018769..d29f9260fb1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 77d614232d8..def02483286 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -459,6 +459,20 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mov	pc, r12
 
+__fa526_cache_on:
+		mov	r12, lr
+		bl	__setup_mmu
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c7, 0	@ Invalidate whole cache
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		orr	r0, r0, #0x1000		@ I-cache enable
+		bl	__common_mmu_cache_on
+		mov	r0, #0
+		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
+		mov	pc, r12
+
 __arm6_mmu_cache_on:
 		mov	r12, lr
 		bl	__setup_mmu
@@ -636,6 +650,12 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv5tej_mmu_cache_flush
 
+		.word	0x66015261		@ FA526
+		.word	0xff01fff1
+		b	__fa526_cache_on
+		b	__armv4_mmu_cache_off
+		b	__fa526_cache_flush
+
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
@@ -775,6 +795,12 @@ __armv4_mpu_cache_flush:
 		mcr	p15, 0, ip, c7, c10, 4	@ drain WB
 		mov	pc, lr
 		
+__fa526_cache_flush:
+		mov	r1, #0
+		mcr	p15, 0, r1, c7, c14, 0	@ clean and invalidate D cache
+		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
+		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
+		mov	pc, lr
 
 __armv6_mmu_cache_flush:
 		mov	r1, #0
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 6cbd8fdc9f1..a6b8b90ed57 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -46,6 +46,14 @@
 # define MULTI_CACHE 1
 #endif
 
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE fa
+# endif
+#endif
+
 #if defined(CONFIG_CPU_ARM926T)
 # ifdef _CACHE
 #  define MULTI_CACHE 1
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index f341c9dbd66..e6eb8a67b80 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -76,6 +76,14 @@
 # endif
 #endif
 
+#ifdef CONFIG_CPU_COPY_FA
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER fa
+# endif
+#endif
+
 #ifdef CONFIG_CPU_SA1100
 # ifdef _USER
 #  define MULTI_USER 1
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index db80203b68e..00949281d3e 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -89,6 +89,14 @@
 #   define CPU_NAME cpu_arm922
 #  endif
 # endif
+# ifdef CONFIG_CPU_FA526
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_fa526
+#  endif
+# endif
 # ifdef CONFIG_CPU_ARM925T
 #  ifdef CPU_NAME
 #   undef  MULTI_CPU
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 811be55f338..d6a4dad99c9 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -125,6 +125,12 @@ extern unsigned int user_debug;
 				    : : "r" (0) : "memory")
 #define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
 				    : : "r" (0) : "memory")
+#elif defined(CONFIG_CPU_FA526)
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
 #else
 #define isb() __asm__ __volatile__ ("" : : : "memory")
 #define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index ffedd2494ea..a62218013c7 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -54,6 +54,7 @@
  *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
  *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
  *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
+ *	  fa    - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB))
  *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
  *	  v7wbi - identical to v6wbi
  */
@@ -90,6 +91,22 @@
 # define v4_always_flags	(-1UL)
 #endif
 
+#define fa_tlb_flags	(TLB_WB | TLB_BTB | TLB_DCLEAN | \
+			 TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FA
+# define fa_possible_flags	fa_tlb_flags
+# define fa_always_flags	fa_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB fa
+# endif
+#else
+# define fa_possible_flags	0
+# define fa_always_flags	(-1UL)
+#endif
+
 #define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
 			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
 			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
@@ -268,6 +285,7 @@ extern struct cpu_tlb_fns cpu_tlb;
 				 v4wbi_possible_flags | \
 				 fr_possible_flags | \
 				 v4wb_possible_flags | \
+				 fa_possible_flags | \
 				 v6wbi_possible_flags | \
 				 v7wbi_possible_flags)
 
@@ -276,6 +294,7 @@ extern struct cpu_tlb_fns cpu_tlb;
 				 v4wbi_always_flags & \
 				 fr_always_flags & \
 				 v4wb_always_flags & \
+				 fa_always_flags & \
 				 v6wbi_always_flags & \
 				 v7wbi_always_flags)
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f3773c0..bc3331863d9 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -186,6 +186,24 @@ config CPU_ARM926T
 	  Say Y if you want support for the ARM926T processor.
 	  Otherwise, say N.
 
+# FA526
+config CPU_FA526
+	bool
+	select CPU_32v4
+	select CPU_ABRT_EV4
+	select CPU_PABRT_NOIFAR
+	select CPU_CACHE_VIVT
+	select CPU_CP15_MMU
+	select CPU_CACHE_FA
+	select CPU_COPY_FA if MMU
+	select CPU_TLB_FA if MMU
+	help
+	  The FA526 is a version of the ARMv4 compatible processor with
+	  Branch Target Buffer, Unified TLB and cache line size 16.
+
+	  Say Y if you want support for the FA526 processor.
+	  Otherwise, say N.
+
 # ARM940T
 config CPU_ARM940T
 	bool "Support ARM940T processor" if ARCH_INTEGRATOR
@@ -484,6 +502,9 @@ config CPU_CACHE_VIVT
 config CPU_CACHE_VIPT
 	bool
 
+config CPU_CACHE_FA
+	bool
+
 if MMU
 # The copy-page model
 config CPU_COPY_V3
@@ -498,6 +519,9 @@ config CPU_COPY_V4WB
 config CPU_COPY_FEROCEON
 	bool
 
+config CPU_COPY_FA
+	bool
+
 config CPU_COPY_V6
 	bool
 
@@ -528,6 +552,13 @@ config CPU_TLB_FEROCEON
 	help
 	  Feroceon TLB (v4wbi with non-outer-cachable page table walks).
 
+config CPU_TLB_FA
+	bool
+	help
+	  Faraday ARM FA526 architecture, unified TLB with writeback cache
+	  and invalidate instruction cache entry. Branch target buffer is
+	  also supported.
+
 config CPU_TLB_V6
 	bool
 
@@ -638,7 +669,7 @@ config CPU_DCACHE_SIZE
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+	depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you
@@ -653,7 +684,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
+	depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 || CPU_FA526
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a3611..40f941c2245 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
 obj-$(CONFIG_CPU_CACHE_V4WB)	+= cache-v4wb.o
 obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
 obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
+obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
 
 obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_CPU_COPY_V6)	+= copypage-v6.o context.o
 obj-$(CONFIG_CPU_SA1100)	+= copypage-v4mc.o
 obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
+obj-$(CONFIG_CPU_COPY_FA)	+= copypage-fa.o
 
 obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
@@ -49,6 +51,7 @@ obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
 obj-$(CONFIG_CPU_TLB_FEROCEON)	+= tlb-v4wbi.o	# reuse v4wbi TLB functions
 obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
 obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
+obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
 
 obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
@@ -62,6 +65,7 @@ obj-$(CONFIG_CPU_ARM925T)	+= proc-arm925.o
 obj-$(CONFIG_CPU_ARM926T)	+= proc-arm926.o
 obj-$(CONFIG_CPU_ARM940T)	+= proc-arm940.o
 obj-$(CONFIG_CPU_ARM946E)	+= proc-arm946.o
+obj-$(CONFIG_CPU_FA526)		+= proc-fa526.o
 obj-$(CONFIG_CPU_ARM1020)	+= proc-arm1020.o
 obj-$(CONFIG_CPU_ARM1020E)	+= proc-arm1020e.o
 obj-$(CONFIG_CPU_ARM1022)	+= proc-arm1022.o
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
new file mode 100644
index 00000000000..b63a8f7b95c
--- /dev/null
+++ b/arch/arm/mm/cache-fa.S
@@ -0,0 +1,220 @@
+/*
+ *  linux/arch/arm/mm/cache-fa.S
+ *
+ *  Copyright (C) 2005 Faraday Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on cache-v4wb.S:
+ *  Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Processors: FA520 FA526 FA626	
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE	16
+
+/*
+ * The total size of the data cache.
+ */
+#ifdef CONFIG_ARCH_GEMINI
+#define CACHE_DSIZE	8192
+#else
+#define CACHE_DSIZE	16384 
+#endif 
+
+/* FIXME: put optimal value here. Current one is just estimation */
+#define CACHE_DLIMIT	(CACHE_DSIZE * 2)
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Clean and invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(fa_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(fa_flush_kern_cache_all)
+	mov	ip, #0
+	mov	r2, #VM_EXEC
+__flush_whole_cache:
+	mcr	p15, 0, ip, c7, c14, 0		@ clean/invalidate D cache
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
+	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (inclusive, page aligned)
+ *	- end	- end address (exclusive, page aligned)
+ *	- flags	- vma_area_struct flags describing address space
+ */
+ENTRY(fa_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #CACHE_DLIMIT		@ total size >= limit?
+	bhs	__flush_whole_cache		@ flush whole D cache
+
+1:	tst	r2, #VM_EXEC
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I line
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(fa_coherent_kern_range)
+	/* fall through */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(fa_coherent_user_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(kaddr)
+ *
+ *	Ensure that the data held in the page kaddr is written back
+ *	to the page in question.
+ *
+ *	- kaddr   - kernel address (guaranteed to be page aligned)
+ */
+ENTRY(fa_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(fa_dma_inv_range)
+	tst	r0, #CACHE_DLINESIZE - 1
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	bic	r1, r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D entry
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean (write back) the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(fa_dma_clean_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0	
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(fa_dma_flush_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0	
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+	__INITDATA
+
+	.type	fa_cache_fns, #object
+ENTRY(fa_cache_fns)
+	.long	fa_flush_kern_cache_all
+	.long	fa_flush_user_cache_all
+	.long	fa_flush_user_cache_range
+	.long	fa_coherent_kern_range
+	.long	fa_coherent_user_range
+	.long	fa_flush_kern_dcache_page
+	.long	fa_dma_inv_range
+	.long	fa_dma_clean_range
+	.long	fa_dma_flush_range
+	.size	fa_cache_fns, . - fa_cache_fns
diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c
new file mode 100644
index 00000000000..b2a6008b011
--- /dev/null
+++ b/arch/arm/mm/copypage-fa.c
@@ -0,0 +1,86 @@
+/*
+ *  linux/arch/arm/lib/copypage-fa.S
+ *
+ *  Copyright (C) 2005 Faraday Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on copypage-v4wb.S:
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * Faraday optimised copy_user_page
+ */
+static void __naked
+fa_copy_user_page(void *kto, const void *kfrom)
+{
+	asm("\
+	stmfd	sp!, {r4, lr}			@ 2\n\
+	mov	r2, %0				@ 1\n\
+1:	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	r0, r0, #16			@ 1\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	r0, r0, #16			@ 1\n\
+	subs	r2, r2, #1			@ 1\n\
+	bne	1b				@ 1\n\
+	mcr	p15, 0, r2, c7, c10, 4		@ 1   drain WB\n\
+	ldmfd	sp!, {r4, pc}			@ 3"
+	:
+	: "I" (PAGE_SIZE / 32));
+}
+
+void fa_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
+{
+	void *kto, *kfrom;
+
+	kto = kmap_atomic(to, KM_USER0);
+	kfrom = kmap_atomic(from, KM_USER1);
+	fa_copy_user_page(kto, kfrom);
+	kunmap_atomic(kfrom, KM_USER1);
+	kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * Faraday optimised clear_user_page
+ *
+ * Same story as above.
+ */
+void fa_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile("\
+	mov	r1, %2				@ 1\n\
+	mov	r2, #0				@ 1\n\
+	mov	r3, #0				@ 1\n\
+	mov	ip, #0				@ 1\n\
+	mov	lr, #0				@ 1\n\
+1:	stmia	%0, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	stmia	%0, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
+	add	%0, %0, #16			@ 1\n\
+	subs	r1, r1, #1			@ 1\n\
+	bne	1b				@ 1\n\
+	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 32)
+	: "r1", "r2", "r3", "ip", "lr");
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns fa_user_fns __initdata = {
+	.cpu_clear_user_highpage = fa_clear_user_highpage,
+	.cpu_copy_user_highpage	= fa_copy_user_highpage,
+};
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
new file mode 100644
index 00000000000..08b8a955d5d
--- /dev/null
+++ b/arch/arm/mm/proc-fa526.S
@@ -0,0 +1,248 @@
+/*
+ *  linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
+ *
+ *  Written by : Luke Lee
+ *  Copyright (C) 2005 Faraday Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the fa526.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#include "proc-macros.S"
+
+#define CACHE_DLINESIZE	16
+
+	.text
+/*
+ * cpu_fa526_proc_init()
+ */
+ENTRY(cpu_fa526_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_fa526_proc_fin()
+ */
+ENTRY(cpu_fa526_proc_fin)
+	stmfd	sp!, {lr}
+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	msr	cpsr_c, ip
+	bl	fa_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x000e			@ ............wca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	nop
+	nop
+	ldmfd	sp!, {pc}
+
+/*
+ * cpu_fa526_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	4
+ENTRY(cpu_fa526_reset)
+/* TODO: Use CP8 if possible... */
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+#ifdef CONFIG_MMU
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+#endif
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x000f			@ ............wcam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	bic	ip, ip, #0x0800			@ BTB off
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	nop
+	nop
+	mov	pc, r0
+
+/*
+ * cpu_fa526_do_idle()
+ */
+	.align	4
+ENTRY(cpu_fa526_do_idle)
+	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
+	mov	pc, lr
+
+
+ENTRY(cpu_fa526_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_fa526_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	4
+ENTRY(cpu_fa526_switch_mm)
+#ifdef CONFIG_MMU
+	mov	ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
+#else
+	mcr	p15, 0, ip, c7, c14, 0		@ clean and invalidate whole D cache
+#endif
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c5, 6		@ invalidate BTB since mm changed
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate UTLB
+#endif
+	mov	pc, lr
+
+/*
+ * cpu_fa526_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	4
+ENTRY(cpu_fa526_set_pte_ext)
+#ifdef CONFIG_MMU
+	armv3_set_pte_ext
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+#endif
+	mov	pc, lr
+
+	__INIT
+
+	.type	__fa526_setup, #function
+__fa526_setup:
+	/* On return of this routine, r0 must carry correct flags for CFG register */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
+#ifdef CONFIG_MMU
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
+#endif
+	mcr	p15, 0, r0, c7, c5, 5		@ invalidate IScratchpad RAM
+
+	mov	r0, #1
+	mcr	p15, 0, r0, c1, c1, 0		@ turn-on ECR
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB All
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
+
+	mov	r0, #0x1f			@ Domains 0, 1 = manager, 2 = client
+	mcr	p15, 0, r0, c3, c0		@ load domain access register
+
+	mrc	p15, 0, r0, c1, c0		@ get control register v4
+	ldr	r5, fa526_cr1_clear
+	bic	r0, r0, r5
+	ldr	r5, fa526_cr1_set
+	orr	r0, r0, r5
+	mov	pc, lr
+	.size	__fa526_setup, . - __fa526_setup
+
+	/*
+	 * .RVI ZFRS BLDP WCAM
+	 * ..11 1001 .111 1101
+	 *
+	 */
+	.type	fa526_cr1_clear, #object
+	.type	fa526_cr1_set, #object
+fa526_cr1_clear:
+	.word	0x3f3f
+fa526_cr1_set:
+	.word	0x397D
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+	.type	fa526_processor_functions, #object
+fa526_processor_functions:
+	.word	v4_early_abort
+	.word	pabort_noifar
+	.word	cpu_fa526_proc_init
+	.word	cpu_fa526_proc_fin
+	.word	cpu_fa526_reset
+	.word   cpu_fa526_do_idle
+	.word	cpu_fa526_dcache_clean_area
+	.word	cpu_fa526_switch_mm
+	.word	cpu_fa526_set_pte_ext
+	.size	fa526_processor_functions, . - fa526_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv4"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v4"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_fa526_name, #object
+cpu_fa526_name:
+	.asciz	"FA526"
+	.size	cpu_fa526_name, . - cpu_fa526_name
+
+	.align
+
+	.section ".proc.info.init", #alloc, #execinstr
+
+	.type	__fa526_proc_info,#object
+__fa526_proc_info:
+	.long	0x66015261
+	.long	0xff01fff1
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__fa526_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF
+	.long	cpu_fa526_name
+	.long	fa526_processor_functions
+	.long	fa_tlb_fns
+	.long	fa_user_fns
+	.long	fa_cache_fns
+	.size	__fa526_proc_info, . - __fa526_proc_info
diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S
new file mode 100644
index 00000000000..9694f1f6f48
--- /dev/null
+++ b/arch/arm/mm/tlb-fa.S
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mm/tlb-fa.S
+ *
+ *  Copyright (C) 2005 Faraday Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on tlb-v4wbi.S:
+ *  Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  ARM architecture version 4, Faraday variation.
+ *  This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
+ *
+ *  Processors: FA520 FA526 FA626
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+
+/*
+ *	flush_user_tlb_range(start, end, mm)
+ *
+ *	Invalidate a range of TLB entries in the specified address space.
+ *
+ *	- start - range start address
+ *	- end   - range end address
+ *	- mm    - mm_struct describing address space
+ */
+	.align	4
+ENTRY(fa_flush_user_tlb_range)
+	vma_vm_mm ip, r2
+	act_mm	r3				@ get current->active_mm
+	eors	r3, ip, r3			@ == mm ?
+	movne	pc, lr				@ no, we dont do anything
+	mov	r3, #0
+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+	bic	r0, r0, #0x0ff
+	bic	r0, r0, #0xf00
+1:	mcr	p15, 0, r0, c8, c7, 1		@ invalidate UTLB entry
+	add	r0, r0, #PAGE_SZ
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r3, c7, c5, 6		@ invalidate BTB
+	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
+	mov	pc, lr
+
+
+ENTRY(fa_flush_kern_tlb_range)
+	mov	r3, #0
+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+	bic	r0, r0, #0x0ff
+	bic	r0, r0, #0xf00
+1:	mcr	p15, 0, r0, c8, c7, 1		@ invalidate UTLB entry
+	add	r0, r0, #PAGE_SZ
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r3, c7, c5, 6		@ invalidate BTB
+	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r3, c7, c5, 4		@ prefetch flush
+	mov	pc, lr
+
+	__INITDATA
+
+	.type	fa_tlb_fns, #object
+ENTRY(fa_tlb_fns)
+	.long	fa_flush_user_tlb_range
+	.long	fa_flush_kern_tlb_range
+	.long	fa_tlb_flags
+	.size	fa_tlb_fns, . - fa_tlb_fns
-- 
cgit v1.2.3


From 2f3ec501ba1e1a68ab9d413f143bdc8f46417fc1 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 16 Mar 2009 15:28:42 -0700
Subject: [ARM] OMAP: Fix compile for omap2_init_common_hw()

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/board-3430sdp.c      | 2 +-
 arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
 arch/arm/mach-omap2/board-overo.c        | 2 +-
 arch/arm/mach-omap2/board-rx51.c         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 2af38e56db3..ed927497212 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -222,7 +222,7 @@ static inline void __init sdp3430_init_smc91x(void)
 
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	sdp3430_init_smc91x();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 16e2128daa1..402f09c6cf1 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -118,7 +118,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 782268c9194..b3f6e9d8180 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -239,7 +239,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 6a3c5e53d99..3a0daac6c83 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -62,7 +62,7 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
-	omap2_init_common_hw();
+	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
-- 
cgit v1.2.3


From 59d3a193f1ec1639db447aa1ceb39cd1811fb36e Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Thu, 26 Mar 2009 10:06:08 +0200
Subject: ARM: Add Gemini architecture v3

Adds support for Cortina Systems Gemini family CPUs:
http://www.cortina-systems.com/products/category/18

v3:
- fixed __io(a) to be defined as __typesafe_io(a)

v2:
- #include <asm/io.h> -> <linux/io.h>
- remove asm/system.h include
- revorked mm.c to use named initializers
- removed "empty" dma.h
- updated copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
---
 arch/arm/Kconfig                                |   8 +
 arch/arm/Makefile                               |   1 +
 arch/arm/mach-gemini/Kconfig                    |  12 +
 arch/arm/mach-gemini/Makefile                   |   7 +
 arch/arm/mach-gemini/Makefile.boot              |   9 +
 arch/arm/mach-gemini/common.h                   |  27 +++
 arch/arm/mach-gemini/devices.c                  |  92 ++++++++
 arch/arm/mach-gemini/include/mach/debug-macro.S |  23 ++
 arch/arm/mach-gemini/include/mach/entry-macro.S |  39 ++++
 arch/arm/mach-gemini/include/mach/global_reg.h  | 278 ++++++++++++++++++++++++
 arch/arm/mach-gemini/include/mach/hardware.h    |  75 +++++++
 arch/arm/mach-gemini/include/mach/io.h          |  18 ++
 arch/arm/mach-gemini/include/mach/irqs.h        |  50 +++++
 arch/arm/mach-gemini/include/mach/memory.h      |  19 ++
 arch/arm/mach-gemini/include/mach/system.h      |  37 ++++
 arch/arm/mach-gemini/include/mach/timex.h       |  13 ++
 arch/arm/mach-gemini/include/mach/uncompress.h  |  42 ++++
 arch/arm/mach-gemini/include/mach/vmalloc.h     |  10 +
 arch/arm/mach-gemini/irq.c                      | 102 +++++++++
 arch/arm/mach-gemini/mm.c                       |  82 +++++++
 arch/arm/mach-gemini/time.c                     |  89 ++++++++
 21 files changed, 1033 insertions(+)
 create mode 100644 arch/arm/mach-gemini/Kconfig
 create mode 100644 arch/arm/mach-gemini/Makefile
 create mode 100644 arch/arm/mach-gemini/Makefile.boot
 create mode 100644 arch/arm/mach-gemini/common.h
 create mode 100644 arch/arm/mach-gemini/devices.c
 create mode 100644 arch/arm/mach-gemini/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-gemini/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-gemini/include/mach/global_reg.h
 create mode 100644 arch/arm/mach-gemini/include/mach/hardware.h
 create mode 100644 arch/arm/mach-gemini/include/mach/io.h
 create mode 100644 arch/arm/mach-gemini/include/mach/irqs.h
 create mode 100644 arch/arm/mach-gemini/include/mach/memory.h
 create mode 100644 arch/arm/mach-gemini/include/mach/system.h
 create mode 100644 arch/arm/mach-gemini/include/mach/timex.h
 create mode 100644 arch/arm/mach-gemini/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-gemini/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-gemini/irq.c
 create mode 100644 arch/arm/mach-gemini/mm.c
 create mode 100644 arch/arm/mach-gemini/time.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87f993..5686f4074dd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -275,6 +275,12 @@ config ARCH_EP93XX
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
+config ARCH_GEMINI
+	bool "Cortina Systems Gemini"
+	select CPU_FA526
+	help
+	  Support for the Cortina Systems Gemini family SoCs
+
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
@@ -598,6 +604,8 @@ source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
+source "arch/arm/mach-gemini/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d29f9260fb1..56e13bf2202 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -108,6 +108,7 @@ endif
  machine-$(CONFIG_ARCH_PXA)	   := pxa
  machine-$(CONFIG_ARCH_L7200)	   := l7200
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+ machine-$(CONFIG_ARCH_GEMINI)     := gemini
  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
new file mode 100644
index 00000000000..3aff39abb18
--- /dev/null
+++ b/arch/arm/mach-gemini/Kconfig
@@ -0,0 +1,12 @@
+if ARCH_GEMINI
+
+menu "Cortina Systems Gemini Implementations"
+
+endmenu
+
+config GEMINI_MEM_SWAP
+	bool "Gemini memory is swapped"
+	help
+	  Say Y here if Gemini memory is swapped by bootloader.
+
+endif
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
new file mode 100644
index 00000000000..133e2050685
--- /dev/null
+++ b/arch/arm/mach-gemini/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y			:= irq.o mm.o time.o devices.o
diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot
new file mode 100644
index 00000000000..22a52c228d9
--- /dev/null
+++ b/arch/arm/mach-gemini/Makefile.boot
@@ -0,0 +1,9 @@
+ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+else
+   zreladdr-y	:= 0x10008000
+params_phys-y	:= 0x10000100
+initrd_phys-y	:= 0x10800000
+endif
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
new file mode 100644
index 00000000000..9c1afa1c580
--- /dev/null
+++ b/arch/arm/mach-gemini/common.h
@@ -0,0 +1,27 @@
+/*
+ * Common Gemini architecture functions
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __GEMINI_COMMON_H__
+#define __GEMINI_COMMON_H__
+
+struct mtd_partition;
+
+extern void gemini_map_io(void);
+extern void gemini_init_irq(void);
+extern void gemini_timer_init(void);
+
+/* Common platform devices registration functions */
+extern int platform_register_uart(void);
+extern int platform_register_pflash(unsigned int size,
+				    struct mtd_partition *parts,
+				    unsigned int nr_parts);
+
+#endif /* __GEMINI_COMMON_H__ */
diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c
new file mode 100644
index 00000000000..6b525253d02
--- /dev/null
+++ b/arch/arm/mach-gemini/devices.c
@@ -0,0 +1,92 @@
+/*
+ * Common devices definition for Gemini
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= (void *)IO_ADDRESS(GEMINI_UART_BASE),
+		.mapbase	= GEMINI_UART_BASE,
+		.irq		= IRQ_UART,
+		.uartclk	= UART_CLK,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.type		= PORT_16550A,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
+	},
+	{},
+};
+
+static struct platform_device serial_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM,
+	.dev	= {
+		.platform_data = serial_platform_data,
+	},
+};
+
+int platform_register_uart(void)
+{
+	return platform_device_register(&serial_device);
+}
+
+static struct resource flash_resource = {
+	.start	= GEMINI_FLASH_BASE,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data pflash_platform_data = {};
+
+static struct platform_device pflash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = &pflash_platform_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
+			     unsigned int nr_parts)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
+
+	if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
+		return -ENXIO;
+
+	if (reg & FLASH_WIDTH_16BIT)
+		pflash_platform_data.width = 2;
+	else
+		pflash_platform_data.width = 1;
+
+	/* enable parallel flash pins and disable others */
+	reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
+	reg &= ~PFLASH_PADS_DISABLE;
+	reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
+	__raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
+
+	flash_resource.end = flash_resource.start + size - 1;
+
+	pflash_platform_data.parts = parts;
+	pflash_platform_data.nr_parts = nr_parts;
+
+	return platform_device_register(&pflash_device);
+}
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
new file mode 100644
index 00000000000..d04a6eaeae1
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =GEMINI_UART_BASE			@ physical
+	ldrne	\rx, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
+	.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S
new file mode 100644
index 00000000000..1624f91a2b8
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Low-level IRQ helper macros for Gemini platform.
+ *
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+#define IRQ_STATUS	0x14
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr     \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
+	ldr     \irqnr, [\irqstat]
+	cmp     \irqnr, #0
+	beq     2313f
+	mov     \tmp, \irqnr
+	mov     \irqnr, #0
+2312:
+	tst     \tmp, #1
+	bne     2313f
+	add     \irqnr, \irqnr, #1
+	mov     \tmp, \tmp, lsr #1
+	cmp     \irqnr, #31
+	bcc     2312b
+2313:
+	.endm
diff --git a/arch/arm/mach-gemini/include/mach/global_reg.h b/arch/arm/mach-gemini/include/mach/global_reg.h
new file mode 100644
index 00000000000..de7ff7e849f
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/global_reg.h
@@ -0,0 +1,278 @@
+/*
+ *  This file contains the hardware definitions for Gemini.
+ *
+ *  Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_GLOBAL_REG_H
+#define __MACH_GLOBAL_REG_H
+
+/* Global Word ID Register*/
+#define GLOBAL_ID			0x00
+
+#define CHIP_ID(reg)			((reg) >> 8)
+#define CHIP_REVISION(reg)		((reg) & 0xFF)
+
+/* Global Status Register */
+#define GLOBAL_STATUS			0x04
+
+#define CPU_BIG_ENDIAN			(1 << 31)
+#define PLL_OSC_30M			(1 << 30)	/* else 60MHz */
+
+#define OPERATION_MODE_MASK		(0xF << 26)
+#define OPM_IDDQ			(0xF << 26)
+#define OPM_NAND			(0xE << 26)
+#define OPM_RING			(0xD << 26)
+#define OPM_DIRECT_BOOT			(0xC << 26)
+#define OPM_USB1_PHY_TEST		(0xB << 26)
+#define OPM_USB0_PHY_TEST		(0xA << 26)
+#define OPM_SATA1_PHY_TEST		(0x9 << 26)
+#define OPM_SATA0_PHY_TEST		(0x8 << 26)
+#define OPM_ICE_ARM			(0x7 << 26)
+#define OPM_ICE_FARADAY			(0x6 << 26)
+#define OPM_PLL_BYPASS			(0x5 << 26)
+#define OPM_DEBUG			(0x4 << 26)
+#define OPM_BURN_IN			(0x3 << 26)
+#define OPM_MBIST			(0x2 << 26)
+#define OPM_SCAN			(0x1 << 26)
+#define OPM_REAL			(0x0 << 26)
+
+#define FLASH_TYPE_MASK			(0x3 << 24)
+#define FLASH_TYPE_NAND_2K		(0x3 << 24)
+#define FLASH_TYPE_NAND_512		(0x2 << 24)
+#define FLASH_TYPE_PARALLEL		(0x1 << 24)
+#define FLASH_TYPE_SERIAL		(0x0 << 24)
+/* if parallel */
+#define FLASH_WIDTH_16BIT		(1 << 23)	/* else 8 bit */
+/* if serial */
+#define FLASH_ATMEL			(1 << 23)	/* else STM */
+
+#define FLASH_SIZE_MASK			(0x3 << 21)
+#define NAND_256M			(0x3 << 21)	/* and more */
+#define NAND_128M			(0x2 << 21)
+#define NAND_64M			(0x1 << 21)
+#define NAND_32M			(0x0 << 21)
+#define ATMEL_16M			(0x3 << 21)	/* and more */
+#define ATMEL_8M			(0x2 << 21)
+#define ATMEL_4M_2M			(0x1 << 21)
+#define ATMEL_1M			(0x0 << 21)	/* and less */
+#define STM_32M				(1 << 22)	/* and more */
+#define STM_16M				(0 << 22)	/* and less */
+
+#define FLASH_PARALLEL_HIGH_PIN_CNT	(1 << 20)	/* else low pin cnt */
+
+#define CPU_AHB_RATIO_MASK		(0x3 << 18)
+#define CPU_AHB_1_1			(0x0 << 18)
+#define CPU_AHB_3_2			(0x1 << 18)
+#define CPU_AHB_24_13			(0x2 << 18)
+#define CPU_AHB_2_1			(0x3 << 18)
+
+#define REG_TO_AHB_SPEED(reg)		((((reg) >> 15) & 0x7) * 10 + 130)
+#define AHB_SPEED_TO_REG(x)		((((x - 130)) / 10) << 15)
+
+/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
+#define OVERRIDE_FLASH_TYPE_SHIFT	16
+#define OVERRIDE_FLASH_WIDTH_SHIFT	16
+#define OVERRIDE_FLASH_SIZE_SHIFT	16
+#define OVERRIDE_CPU_AHB_RATIO_SHIFT	15
+#define OVERRIDE_AHB_SPEED_SHIFT	15
+
+/* Global PLL Control Register */
+#define GLOBAL_PLL_CTRL			0x08
+
+#define PLL_BYPASS			(1 << 31)
+#define PLL_POWER_DOWN			(1 << 8)
+#define PLL_CONTROL_Q			(0x1F << 0)
+
+/* Global Soft Reset Control Register */
+#define GLOBAL_RESET			0x0C
+
+#define RESET_GLOBAL			(1 << 31)
+#define RESET_CPU1			(1 << 30)
+#define RESET_TVE			(1 << 28)
+#define RESET_SATA1			(1 << 27)
+#define RESET_SATA0			(1 << 26)
+#define RESET_CIR			(1 << 25)
+#define RESET_EXT_DEV			(1 << 24)
+#define RESET_WD			(1 << 23)
+#define RESET_GPIO2			(1 << 22)
+#define RESET_GPIO1			(1 << 21)
+#define RESET_GPIO0			(1 << 20)
+#define RESET_SSP			(1 << 19)
+#define RESET_UART			(1 << 18)
+#define RESET_TIMER			(1 << 17)
+#define RESET_RTC			(1 << 16)
+#define RESET_INT1			(1 << 15)
+#define RESET_INT0			(1 << 14)
+#define RESET_LCD			(1 << 13)
+#define RESET_LPC			(1 << 12)
+#define RESET_APB			(1 << 11)
+#define RESET_DMA			(1 << 10)
+#define RESET_USB1			(1 << 9)
+#define RESET_USB0			(1 << 8)
+#define RESET_PCI			(1 << 7)
+#define RESET_GMAC1			(1 << 6)
+#define RESET_GMAC0			(1 << 5)
+#define RESET_SECURITY			(1 << 4)
+#define RESET_RAID			(1 << 3)
+#define RESET_IDE			(1 << 2)
+#define RESET_FLASH			(1 << 1)
+#define RESET_DRAM			(1 << 0)
+
+/* Global IO Pad Driving Capability Control Register */
+#define GLOBAL_IO_DRIVING_CTRL		0x10
+
+#define DRIVING_CURRENT_MASK		0x3
+
+/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
+#define GPIO1_PADS_31_28_SHIFT		28
+#define GPIO0_PADS_31_16_SHIFT		26
+#define GPIO0_PADS_15_0_SHIFT		24
+#define PCI_AND_EXT_RESET_PADS_SHIFT	22
+#define IDE_PADS_SHIFT			20
+#define GMAC1_PADS_SHIFT		18
+#define GMAC0_PADS_SHIFT		16
+/* DRAM is not in mA and poorly documented */
+#define DRAM_CLOCK_PADS_SHIFT		8
+#define DRAM_DATA_PADS_SHIFT		4
+#define DRAM_CONTROL_PADS_SHIFT		0
+
+/* Global IO Pad Slew Rate Control Register */
+#define GLOBAL_IO_SLEW_RATE_CTRL	0x14
+
+#define GPIO1_PADS_31_28_SLOW		(1 << 10)
+#define GPIO0_PADS_31_16_SLOW		(1 << 9)
+#define GPIO0_PADS_15_0_SLOW		(1 << 8)
+#define PCI_PADS_SLOW			(1 << 7)
+#define IDE_PADS_SLOW			(1 << 6)
+#define GMAC1_PADS_SLOW			(1 << 5)
+#define GMAC0_PADS_SLOW			(1 << 4)
+#define DRAM_CLOCK_PADS_SLOW		(1 << 1)
+#define DRAM_IO_PADS_SLOW		(1 << 0)
+
+/*
+ * General skew control defines
+ * 16 steps, each step is around 0.2ns
+ */
+#define SKEW_MASK			0xF
+
+/* Global IDE PAD Skew Control Register */
+#define GLOBAL_IDE_SKEW_CTRL		0x18
+
+#define IDE1_HOST_STROBE_DELAY_SHIFT	28
+#define IDE1_DEVICE_STROBE_DELAY_SHIFT	24
+#define IDE1_OUTPUT_IO_SKEW_SHIFT	20
+#define IDE1_INPUT_IO_SKEW_SHIFT	16
+#define IDE0_HOST_STROBE_DELAY_SHIFT	12
+#define IDE0_DEVICE_STROBE_DELAY_SHIFT	8
+#define IDE0_OUTPUT_IO_SKEW_SHIFT	4
+#define IDE0_INPUT_IO_SKEW_SHIFT	0
+
+/* Global GMAC Control Pad Skew Control Register */
+#define GLOBAL_GMAC_CTRL_SKEW_CTRL	0x1C
+
+#define GMAC1_TXC_SKEW_SHIFT		28
+#define GMAC1_TXEN_SKEW_SHIFT		24
+#define GMAC1_RXC_SKEW_SHIFT		20
+#define GMAC1_RXDV_SKEW_SHIFT		16
+#define GMAC0_TXC_SKEW_SHIFT		12
+#define GMAC0_TXEN_SKEW_SHIFT		8
+#define GMAC0_RXC_SKEW_SHIFT		4
+#define GMAC0_RXDV_SKEW_SHIFT		0
+
+/* Global GMAC0 Data PAD Skew Control Register */
+#define GLOBAL_GMAC0_DATA_SKEW_CTRL	0x20
+/* Global GMAC1 Data PAD Skew Control Register */
+#define GLOBAL_GMAC1_DATA_SKEW_CTRL	0x24
+
+#define GMAC_TXD_SKEW_SHIFT(x)		(((x) * 4) + 16)
+#define GMAC_RXD_SKEW_SHIFT(x)		((x) * 4)
+
+/* CPU has two AHB busses. */
+
+/* Global Arbitration0 Control Register */
+#define GLOBAL_ARBITRATION0_CTRL	0x28
+
+#define BOOT_CONTROLLER_HIGH_PRIO	(1 << 3)
+#define DMA_BUS1_HIGH_PRIO		(1 << 2)
+#define CPU0_HIGH_PRIO			(1 << 0)
+
+/* Global Arbitration1 Control Register */
+#define GLOBAL_ARBITRATION1_CTRL	0x2C
+
+#define TVE_HIGH_PRIO			(1 << 9)
+#define PCI_HIGH_PRIO			(1 << 8)
+#define USB1_HIGH_PRIO			(1 << 7)
+#define USB0_HIGH_PRIO			(1 << 6)
+#define GMAC1_HIGH_PRIO			(1 << 5)
+#define GMAC0_HIGH_PRIO			(1 << 4)
+#define SECURITY_HIGH_PRIO		(1 << 3)
+#define RAID_HIGH_PRIO			(1 << 2)
+#define IDE_HIGH_PRIO			(1 << 1)
+#define DMA_BUS2_HIGH_PRIO		(1 << 0)
+
+/* Common bits for both arbitration registers */
+#define BURST_LENGTH_SHIFT		16
+#define BURST_LENGTH_MASK		(0x3F << 16)
+
+/* Miscellaneous Control Register */
+#define GLOBAL_MISC_CTRL		0x30
+
+#define MEMORY_SPACE_SWAP		(1 << 31)
+#define USB1_PLUG_MINIB			(1 << 30) /* else plug is mini-A */
+#define USB0_PLUG_MINIB			(1 << 29)
+#define GMAC_GMII			(1 << 28)
+#define GMAC_1_ENABLE			(1 << 27)
+/* TODO: define ATA/SATA bits */
+#define USB1_VBUS_ON			(1 << 23)
+#define USB0_VBUS_ON			(1 << 22)
+#define APB_CLKOUT_ENABLE		(1 << 21)
+#define TVC_CLKOUT_ENABLE		(1 << 20)
+#define EXT_CLKIN_ENABLE		(1 << 19)
+#define PCI_66MHZ			(1 << 18) /* else 33 MHz */
+#define PCI_CLKOUT_ENABLE		(1 << 17)
+#define LPC_CLKOUT_ENABLE		(1 << 16)
+#define USB1_WAKEUP_ON			(1 << 15)
+#define USB0_WAKEUP_ON			(1 << 14)
+/* TODO: define PCI idle detect bits */
+#define TVC_PADS_ENABLE			(1 << 9)
+#define SSP_PADS_ENABLE			(1 << 8)
+#define LCD_PADS_ENABLE			(1 << 7)
+#define LPC_PADS_ENABLE			(1 << 6)
+#define PCI_PADS_ENABLE			(1 << 5)
+#define IDE_PADS_ENABLE			(1 << 4)
+#define DRAM_PADS_POWER_DOWN		(1 << 3)
+#define NAND_PADS_DISABLE		(1 << 2)
+#define PFLASH_PADS_DISABLE		(1 << 1)
+#define SFLASH_PADS_DISABLE		(1 << 0)
+
+/* Global Clock Control Register */
+#define GLOBAL_CLOCK_CTRL		0x34
+
+#define POWER_STATE_G0			(1 << 31)
+#define POWER_STATE_S1			(1 << 30) /* else it is S3/S4 state */
+#define SECURITY_APB_AHB		(1 << 29)
+/* else Security APB clk will be 0.75xAHB */
+/* TODO: TVC clock divider */
+#define PCI_CLKRUN_ENABLE		(1 << 16)
+#define BOOT_CLK_DISABLE		(1 << 13)
+#define TVC_CLK_DISABLE			(1 << 12)
+#define FLASH_CLK_DISABLE		(1 << 11)
+#define DDR_CLK_DISABLE			(1 << 10)
+#define PCI_CLK_DISABLE			(1 << 9)
+#define IDE_CLK_DISABLE			(1 << 8)
+#define USB1_CLK_DISABLE		(1 << 7)
+#define USB0_CLK_DISABLE		(1 << 6)
+#define SATA1_CLK_DISABLE		(1 << 5)
+#define SATA0_CLK_DISABLE		(1 << 4)
+#define GMAC1_CLK_DISABLE		(1 << 3)
+#define GMAC0_CLK_DISABLE		(1 << 2)
+#define SECURITY_CLK_DISABLE		(1 << 1)
+
+/* TODO: other registers definitions if needed */
+
+#endif /* __MACH_GLOBAL_REG_H */
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
new file mode 100644
index 00000000000..de6752674c0
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -0,0 +1,75 @@
+/*
+ *  This file contains the hardware definitions for Gemini.
+ *
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/*
+ * Memory Map definitions
+ */
+/* FIXME: Does it really swap SRAM like this? */
+#ifdef CONFIG_GEMINI_MEM_SWAP
+# define GEMINI_DRAM_BASE	0x00000000
+# define GEMINI_SRAM_BASE	0x20000000
+#else
+# define GEMINI_SRAM_BASE	0x00000000
+# define GEMINI_DRAM_BASE	0x10000000
+#endif
+#define GEMINI_FLASH_BASE	0x30000000
+#define GEMINI_GLOBAL_BASE	0x40000000
+#define GEMINI_WAQTCHDOG_BASE	0x41000000
+#define GEMINI_UART_BASE	0x42000000
+#define GEMINI_TIMER_BASE	0x43000000
+#define GEMINI_LCD_BASE		0x44000000
+#define GEMINI_RTC_BASE		0x45000000
+#define GEMINI_SATA_BASE	0x46000000
+#define GEMINI_LPC_HOST_BASE	0x47000000
+#define GEMINI_LPC_IO_BASE	0x47800000
+#define GEMINI_INTERRUPT_BASE	0x48000000
+/* TODO: Different interrupt controlers when SMP
+ * #define GEMINI_INTERRUPT0_BASE	0x48000000
+ * #define GEMINI_INTERRUPT1_BASE	0x49000000
+ */
+#define GEMINI_SSP_CTRL_BASE	0x4A000000
+#define GEMINI_POWER_CTRL_BASE	0x4B000000
+#define GEMINI_CIR_BASE		0x4C000000
+#define GEMINI_GPIO_BASE(x)	(0x4D000000 + (x) * 0x1000000)
+#define GEMINI_PCI_IO_BASE	0x50000000
+#define GEMINI_PCI_MEM_BASE	0x58000000
+#define GEMINI_TOE_BASE		0x60000000
+#define GEMINI_GMAC0_BASE	0x6000A000
+#define GEMINI_GMAC1_BASE	0x6000E000
+#define GEMINI_SECURITY_BASE	0x62000000
+#define GEMINI_IDE0_BASE	0x63000000
+#define GEMINI_IDE1_BASE	0x63400000
+#define GEMINI_RAID_BASE	0x64000000
+#define GEMINI_FLASH_CTRL_BASE	0x65000000
+#define GEMINI_DRAM_CTRL_BASE	0x66000000
+#define GEMINI_GENERAL_DMA_BASE	0x67000000
+#define GEMINI_USB0_BASE	0x68000000
+#define GEMINI_USB1_BASE	0x69000000
+#define GEMINI_BIG_ENDIAN_BASE	0x80000000
+
+#define GEMINI_TIMER1_BASE	GEMINI_TIMER_BASE
+#define GEMINI_TIMER2_BASE	(GEMINI_TIMER_BASE + 0x10)
+#define GEMINI_TIMER3_BASE	(GEMINI_TIMER_BASE + 0x20)
+
+/*
+ * UART Clock when System clk is 150MHz
+ */
+#define UART_CLK	48000000
+
+/*
+ * macro to get at IO space when running virtually
+ */
+#define IO_ADDRESS(x)	((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
+
+#endif
diff --git a/arch/arm/mach-gemini/include/mach/io.h b/arch/arm/mach-gemini/include/mach/io.h
new file mode 100644
index 00000000000..c548056b98b
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/io.h
@@ -0,0 +1,18 @@
+/*
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif /* __MACH_IO_H */
diff --git a/arch/arm/mach-gemini/include/mach/irqs.h b/arch/arm/mach-gemini/include/mach/irqs.h
new file mode 100644
index 00000000000..c7728ac458f
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_IRQS_H__
+#define __MACH_IRQS_H__
+
+#define IRQ_SERIRQ1	31
+#define IRQ_SERIRQ0	30
+#define IRQ_PCID	29
+#define IRQ_PCIC	28
+#define IRQ_PCIB	27
+#define IRQ_PWR		26
+#define IRQ_CIR		25
+#define IRQ_GPIO(x)	(22 + (x))
+#define IRQ_SSP		21
+#define IRQ_LPC		20
+#define IRQ_LCD		19
+#define IRQ_UART	18
+#define IRQ_RTC		17
+#define IRQ_TIMER3	16
+#define IRQ_TIMER2	15
+#define IRQ_TIMER1	14
+#define IRQ_FLASH	12
+#define IRQ_USB1	11
+#define IRQ_USB0	10
+#define IRQ_DMA		9
+#define IRQ_PCI		8
+#define IRQ_IPSEC	7
+#define IRQ_RAID	6
+#define IRQ_IDE1	5
+#define IRQ_IDE0	4
+#define IRQ_WATCHDOG	3
+#define IRQ_GMAC1	2
+#define IRQ_GMAC0	1
+#define IRQ_IPI		0
+
+#define NORMAL_IRQ_NUM	32
+
+#define ARCH_TIMER_IRQ	IRQ_TIMER2
+
+#define NR_IRQS		NORMAL_IRQ_NUM
+
+#endif /* __MACH_IRQS_H__ */
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
new file mode 100644
index 00000000000..2d14d5bf1f9
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/memory.h
@@ -0,0 +1,19 @@
+/*
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_GEMINI_MEM_SWAP
+# define PHYS_OFFSET	UL(0x00000000)
+#else
+# define PHYS_OFFSET	UL(0x10000000)
+#endif
+
+#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
new file mode 100644
index 00000000000..bbbd72767a0
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Because of broken hardware we have to enable interrupts or the CPU
+	 * will never wakeup... Acctualy it is not very good to enable
+	 * interrupts here since scheduler can miss a tick, but there is
+	 * no other way around this. Platforms that needs it for power saving
+	 * should call enable_hlt() in init code, since by default it is
+	 * disabled.
+	 */
+	local_irq_enable();
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	__raw_writel(RESET_GLOBAL | RESET_CPU1,
+		     IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
+}
+
+#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h
new file mode 100644
index 00000000000..dc5690ba975
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * Gemini timex specifications
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* When AHB bus frequency is 150MHz */
+#define CLOCK_TICK_RATE	38000000
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
new file mode 100644
index 00000000000..59c5df7e716
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on mach-pxa/include/mach/uncompress.h:
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile unsigned long *UART = (unsigned long *)GEMINI_UART_BASE;
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+static inline void putc(char c)
+{
+	while (!(UART[UART_LSR] & UART_LSR_THRE))
+		barrier();
+	UART[UART_TX] = c;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
new file mode 100644
index 00000000000..83e536d9436
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define VMALLOC_END	0xF0000000
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
new file mode 100644
index 00000000000..9e613ca8120
--- /dev/null
+++ b/arch/arm/mach-gemini/irq.c
@@ -0,0 +1,102 @@
+/*
+ *  Interrupt routines for Gemini
+ *
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+
+#define IRQ_SOURCE(base_addr)	(base_addr + 0x00)
+#define IRQ_MASK(base_addr)	(base_addr + 0x04)
+#define IRQ_CLEAR(base_addr)	(base_addr + 0x08)
+#define IRQ_TMODE(base_addr)	(base_addr + 0x0C)
+#define IRQ_TLEVEL(base_addr)	(base_addr + 0x10)
+#define IRQ_STATUS(base_addr)	(base_addr + 0x14)
+#define FIQ_SOURCE(base_addr)	(base_addr + 0x20)
+#define FIQ_MASK(base_addr)	(base_addr + 0x24)
+#define FIQ_CLEAR(base_addr)	(base_addr + 0x28)
+#define FIQ_TMODE(base_addr)	(base_addr + 0x2C)
+#define FIQ_LEVEL(base_addr)	(base_addr + 0x30)
+#define FIQ_STATUS(base_addr)	(base_addr + 0x34)
+
+static void gemini_ack_irq(unsigned int irq)
+{
+	__raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
+
+static void gemini_mask_irq(unsigned int irq)
+{
+	unsigned int mask;
+
+	mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+	mask &= ~(1 << irq);
+	__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
+
+static void gemini_unmask_irq(unsigned int irq)
+{
+	unsigned int mask;
+
+	mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+	mask |= (1 << irq);
+	__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
+
+static struct irq_chip gemini_irq_chip = {
+	.name	= "INTC",
+	.ack	= gemini_ack_irq,
+	.mask	= gemini_mask_irq,
+	.unmask	= gemini_unmask_irq,
+};
+
+static struct resource irq_resource = {
+	.name	= "irq_handler",
+	.start	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
+	.end	= IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
+};
+
+void __init gemini_init_irq(void)
+{
+	unsigned int i, mode = 0, level = 0;
+
+	/*
+	 * Disable arch_idle() by default since it is buggy
+	 * For more info see arch/arm/mach-gemini/include/mach/system.h
+	 */
+	disable_hlt();
+
+	request_resource(&iomem_resource, &irq_resource);
+
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &gemini_irq_chip);
+		if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
+			set_irq_handler(i, handle_edge_irq);
+			mode |= 1 << i;
+			level |= 1 << i;
+		} else {			
+			set_irq_handler(i, handle_level_irq);
+		}
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Disable all interrupts */
+	__raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+	__raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+
+	/* Set interrupt mode */
+	__raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+	__raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c
new file mode 100644
index 00000000000..51948242ec0
--- /dev/null
+++ b/arch/arm/mach-gemini/mm.c
@@ -0,0 +1,82 @@
+/*
+ *  Static mappings for Gemini
+ *
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+/* Page table mapping for I/O region */
+static struct map_desc gemini_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(GEMINI_GLOBAL_BASE),
+		.pfn		=__phys_to_pfn(GEMINI_GLOBAL_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_UART_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_UART_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_TIMER_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_TIMER_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_INTERRUPT_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(0)),
+		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(0)),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(1)),
+		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(1)),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(2)),
+		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(2)),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
+		.pfn		= __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
+		.length		= SZ_512K,
+		.type 		= MT_DEVICE,
+	},
+};
+
+void __init gemini_map_io(void)
+{
+	iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
+}
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
new file mode 100644
index 00000000000..21dc5a89d1c
--- /dev/null
+++ b/arch/arm/mach-gemini/time.c
@@ -0,0 +1,89 @@
+/*
+ *  Copyright (C) 2001-2006 Storlink, Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+#include <asm/mach/time.h>
+
+/*
+ * Register definitions for the timers
+ */
+#define TIMER_COUNT(BASE_ADDR)		(BASE_ADDR  + 0x00)
+#define TIMER_LOAD(BASE_ADDR)		(BASE_ADDR  + 0x04)
+#define TIMER_MATCH1(BASE_ADDR)		(BASE_ADDR  + 0x08)
+#define TIMER_MATCH2(BASE_ADDR)		(BASE_ADDR  + 0x0C)
+#define TIMER_CR(BASE_ADDR)		(BASE_ADDR  + 0x30)
+
+#define TIMER_1_CR_ENABLE		(1 << 0)
+#define TIMER_1_CR_CLOCK		(1 << 1)
+#define TIMER_1_CR_INT			(1 << 2)
+#define TIMER_2_CR_ENABLE		(1 << 3)
+#define TIMER_2_CR_CLOCK		(1 << 4)
+#define TIMER_2_CR_INT			(1 << 5)
+#define TIMER_3_CR_ENABLE		(1 << 6)
+#define TIMER_3_CR_CLOCK		(1 << 7)
+#define TIMER_3_CR_INT			(1 << 8)
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction gemini_timer_irq = {
+	.name		= "Gemini Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= gemini_timer_interrupt,
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init gemini_timer_init(void)
+{
+	unsigned int tick_rate, reg_v;
+
+	reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
+	tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
+
+	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
+
+	tick_rate /= 6;		/* APB bus run AHB*(1/6) */
+
+	switch(reg_v & CPU_AHB_RATIO_MASK) {
+	case CPU_AHB_1_1:
+		printk(KERN_CONT "(1/1)\n");
+		break;
+	case CPU_AHB_3_2:
+		printk(KERN_CONT "(3/2)\n");
+		break;
+	case CPU_AHB_24_13:
+		printk(KERN_CONT "(24/13)\n");
+		break;
+	case CPU_AHB_2_1:
+		printk(KERN_CONT "(2/1)\n");
+		break;
+	}
+
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER2, &gemini_timer_irq);
+	/* Start the timer */
+	__raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	__raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	__raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+}
-- 
cgit v1.2.3


From 1df621ae2f3b03d557d962a7afec2b1d04558986 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Thu, 26 Mar 2009 10:06:27 +0200
Subject: Gemini: gpiolib based GPIO support v2

v2:
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
---
 arch/arm/Kconfig                         |   2 +
 arch/arm/mach-gemini/Makefile            |   2 +-
 arch/arm/mach-gemini/common.h            |   1 +
 arch/arm/mach-gemini/gpio.c              | 232 +++++++++++++++++++++++++++++++
 arch/arm/mach-gemini/include/mach/gpio.h |  25 ++++
 arch/arm/mach-gemini/include/mach/irqs.h |   5 +-
 6 files changed, 265 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-gemini/gpio.c
 create mode 100644 arch/arm/mach-gemini/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5686f4074dd..5b0204083e0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -278,6 +278,8 @@ config ARCH_EP93XX
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select CPU_FA526
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index 133e2050685..e2835cdb0d2 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,4 +4,4 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o devices.o
+obj-y			:= irq.o mm.o time.o devices.o gpio.o
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
index 9c1afa1c580..9392834a214 100644
--- a/arch/arm/mach-gemini/common.h
+++ b/arch/arm/mach-gemini/common.h
@@ -17,6 +17,7 @@ struct mtd_partition;
 extern void gemini_map_io(void);
 extern void gemini_init_irq(void);
 extern void gemini_timer_init(void);
+extern void gemini_gpio_init(void);
 
 /* Common platform devices registration functions */
 extern int platform_register_uart(void);
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
new file mode 100644
index 00000000000..e7263854bc7
--- /dev/null
+++ b/arch/arm/mach-gemini/gpio.c
@@ -0,0 +1,232 @@
+/*
+ * Gemini gpiochip and interrupt routines
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on plat-mxc/gpio.c:
+ *  MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ *  Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#define GPIO_BASE(x)		IO_ADDRESS(GEMINI_GPIO_BASE(x))
+
+/* GPIO registers definition */
+#define GPIO_DATA_OUT		0x0
+#define GPIO_DATA_IN		0x4
+#define GPIO_DIR		0x8
+#define GPIO_DATA_SET		0x10
+#define GPIO_DATA_CLR		0x14
+#define GPIO_PULL_EN		0x18
+#define GPIO_PULL_TYPE		0x1C
+#define GPIO_INT_EN		0x20
+#define GPIO_INT_STAT		0x24
+#define GPIO_INT_MASK		0x2C
+#define GPIO_INT_CLR		0x30
+#define GPIO_INT_TYPE		0x34
+#define GPIO_INT_BOTH_EDGE	0x38
+#define GPIO_INT_LEVEL		0x3C
+#define GPIO_DEBOUNCE_EN	0x40
+#define GPIO_DEBOUNCE_PRESCALE	0x44
+
+#define GPIO_PORT_NUM		3
+
+static void _set_gpio_irqenable(unsigned int base, unsigned int index,
+				int enable)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(base + GPIO_INT_EN);
+	reg = (reg & (~(1 << index))) | (!!enable << index);
+	__raw_writel(reg, base + GPIO_INT_EN);
+}
+
+static void gpio_ack_irq(unsigned int irq)
+{
+	unsigned int gpio = irq_to_gpio(irq);
+	unsigned int base = GPIO_BASE(gpio / 32);
+
+	__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
+}
+
+static void gpio_mask_irq(unsigned int irq)
+{
+	unsigned int gpio = irq_to_gpio(irq);
+	unsigned int base = GPIO_BASE(gpio / 32);
+
+	_set_gpio_irqenable(base, gpio % 32, 0);
+}
+
+static void gpio_unmask_irq(unsigned int irq)
+{
+	unsigned int gpio = irq_to_gpio(irq);
+	unsigned int base = GPIO_BASE(gpio / 32);
+
+	_set_gpio_irqenable(base, gpio % 32, 1);
+}
+
+static int gpio_set_irq_type(unsigned int irq, unsigned int type)
+{
+	unsigned int gpio = irq_to_gpio(irq);
+	unsigned int gpio_mask = 1 << (gpio % 32);
+	unsigned int base = GPIO_BASE(gpio / 32);
+	unsigned int reg_both, reg_level, reg_type;
+
+	reg_type = __raw_readl(base + GPIO_INT_TYPE);
+	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		reg_type &= ~gpio_mask;
+		reg_both |= gpio_mask;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		reg_type &= ~gpio_mask;
+		reg_both &= ~gpio_mask;
+		reg_level &= ~gpio_mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		reg_type &= ~gpio_mask;
+		reg_both &= ~gpio_mask;
+		reg_level |= gpio_mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		reg_type |= gpio_mask;
+		reg_level &= ~gpio_mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		reg_type |= gpio_mask;
+		reg_level |= gpio_mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	__raw_writel(reg_type, base + GPIO_INT_TYPE);
+	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
+
+	gpio_ack_irq(irq);
+
+	return 0;
+}
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int gpio_irq_no, irq_stat;
+	unsigned int port = (unsigned int)get_irq_data(irq);
+
+	irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
+
+	gpio_irq_no = GPIO_IRQ_BASE + port * 32;
+	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+
+		if ((irq_stat & 1) == 0)
+			continue;
+
+		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
+				&irq_desc[gpio_irq_no]);
+	}
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.name = "GPIO",
+	.ack = gpio_ack_irq,
+	.mask = gpio_mask_irq,
+	.unmask = gpio_unmask_irq,
+	.set_type = gpio_set_irq_type,
+};
+
+static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+				int dir)
+{
+	unsigned int base = GPIO_BASE(offset / 32);
+	unsigned int reg;
+
+	reg = __raw_readl(base + GPIO_DIR);
+	if (dir)
+		reg |= 1 << (offset % 32);
+	else
+		reg &= ~(1 << (offset % 32));
+	__raw_writel(reg, base + GPIO_DIR);
+}
+
+static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	unsigned int base = GPIO_BASE(offset / 32);
+
+	if (value)
+		__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
+	else
+		__raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
+}
+
+static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned int base = GPIO_BASE(offset / 32);
+
+	return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
+}
+
+static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	_set_gpio_direction(chip, offset, 0);
+	return 0;
+}
+
+static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	_set_gpio_direction(chip, offset, 1);
+	gemini_gpio_set(chip, offset, value);
+	return 0;
+}
+
+static struct gpio_chip gemini_gpio_chip = {
+	.label			= "Gemini",
+	.direction_input	= gemini_gpio_direction_input,
+	.get			= gemini_gpio_get,
+	.direction_output	= gemini_gpio_direction_output,
+	.set			= gemini_gpio_set,
+	.base			= 0,
+	.ngpio			= GPIO_PORT_NUM * 32,
+};
+
+void __init gemini_gpio_init(void)
+{
+	int i, j;
+
+	for (i = 0; i < GPIO_PORT_NUM; i++) {
+		/* disable, unmask and clear all interrupts */
+		__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
+		__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
+		__raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
+
+		for (j = GPIO_IRQ_BASE + i * 32;
+		     j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
+			set_irq_chip(j, &gpio_irq_chip);
+			set_irq_handler(j, handle_edge_irq);
+			set_irq_flags(j, IRQF_VALID);
+		}
+
+		set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler);
+		set_irq_data(IRQ_GPIO(i), (void *)i);
+	}
+
+	BUG_ON(gpiochip_add(&gemini_gpio_chip));
+}
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
new file mode 100644
index 00000000000..3bc2c70f298
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/gpio.h
@@ -0,0 +1,25 @@
+/*
+ * Gemini gpiolib specific defines
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_GPIO_H__
+#define __MACH_GPIO_H__
+
+#include <mach/irqs.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+#define gpio_to_irq(x)	((x) + GPIO_IRQ_BASE)
+#define irq_to_gpio(x)	((x) - GPIO_IRQ_BASE)
+
+#endif /* __MACH_GPIO_H__ */
diff --git a/arch/arm/mach-gemini/include/mach/irqs.h b/arch/arm/mach-gemini/include/mach/irqs.h
index c7728ac458f..06bc47e77e8 100644
--- a/arch/arm/mach-gemini/include/mach/irqs.h
+++ b/arch/arm/mach-gemini/include/mach/irqs.h
@@ -43,8 +43,11 @@
 
 #define NORMAL_IRQ_NUM	32
 
+#define GPIO_IRQ_BASE	NORMAL_IRQ_NUM
+#define GPIO_IRQ_NUM	(3 * 32)
+
 #define ARCH_TIMER_IRQ	IRQ_TIMER2
 
-#define NR_IRQS		NORMAL_IRQ_NUM
+#define NR_IRQS		(NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
 
 #endif /* __MACH_IRQS_H__ */
-- 
cgit v1.2.3


From 839e642f3dda44a35c6a91780bff41d84c288022 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Thu, 26 Mar 2009 10:06:27 +0200
Subject: Gemini: Add support for Teltonika RUT100

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
---
 arch/arm/mach-gemini/Kconfig        |  7 +++
 arch/arm/mach-gemini/Makefile       |  3 ++
 arch/arm/mach-gemini/board-rut1xx.c | 95 +++++++++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 arch/arm/mach-gemini/board-rut1xx.c

(limited to 'arch')

diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 3aff39abb18..515b75cf2e8 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -2,6 +2,13 @@ if ARCH_GEMINI
 
 menu "Cortina Systems Gemini Implementations"
 
+config MACH_RUT100
+	bool "Teltonika RUT100"
+	select GEMINI_MEM_SWAP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Teltonika 3G Router RUT100.
+
 endmenu
 
 config GEMINI_MEM_SWAP
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index e2835cdb0d2..719505b8182 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -5,3 +5,6 @@
 # Object file lists.
 
 obj-y			:= irq.o mm.o time.o devices.o gpio.o
+
+# Board-specific support
+obj-$(CONFIG_MACH_RUT100)	+= board-rut1xx.o
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
new file mode 100644
index 00000000000..e0de968e32a
--- /dev/null
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -0,0 +1,95 @@
+/*
+ *  Support for Teltonika RUT1xx
+ *
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+
+static struct gpio_keys_button rut1xx_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 60,
+		.active_low	= 1,
+		.desc		= "Reset to defaults",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data rut1xx_keys_data = {
+	.buttons	= rut1xx_keys,
+	.nbuttons	= ARRAY_SIZE(rut1xx_keys),
+};
+
+static struct platform_device rut1xx_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rut1xx_keys_data,
+	},
+};
+
+static struct gpio_led rut100_leds[] = {
+	{
+		.name			= "Power",
+		.default_trigger	= "heartbeat",
+		.gpio			= 17,
+	},
+	{
+		.name			= "GSM",
+		.default_trigger	= "default-on",
+		.gpio			= 7,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data rut100_leds_data = {
+	.num_leds	= ARRAY_SIZE(rut100_leds),
+	.leds		= rut100_leds,
+};
+
+static struct platform_device rut1xx_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rut100_leds_data,
+	},
+};
+
+static struct sys_timer rut1xx_timer = {
+	.init	= gemini_timer_init,
+};
+
+static void __init rut1xx_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_8M, NULL, 0);
+	platform_device_register(&rut1xx_leds);
+	platform_device_register(&rut1xx_keys_device);
+}
+
+MACHINE_START(RUT100, "Teltonika RUT100")
+	.phys_io	= 0x7fffc000,
+	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &rut1xx_timer,
+	.init_machine	= rut1xx_init,
+MACHINE_END
-- 
cgit v1.2.3


From 86ee79c3dbd48d7430fd81edc1da3516c9f6dabc Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 26 Mar 2009 01:54:46 -0700
Subject: sparc64: Flush TLB before releasing pages.

tlb_flush_mmu() needs to flush pending TLB entries before
processing the mmu_gather ->pages list.

Noticed by Benjamin Herrenschmidt.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/tlb_64.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ec81cdedef2..ee38e731bfa 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -57,6 +57,8 @@ static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned i
 
 static inline void tlb_flush_mmu(struct mmu_gather *mp)
 {
+	if (!mp->fullmm)
+		flush_tlb_pending();
 	if (mp->need_flush) {
 		free_pages_and_swap_cache(mp->pages, mp->pages_nr);
 		mp->pages_nr = 0;
@@ -78,8 +80,6 @@ static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, un
 
 	if (mp->fullmm)
 		mp->fullmm = 0;
-	else
-		flush_tlb_pending();
 
 	/* keep the page table cache within bounds */
 	check_pgt_cache();
-- 
cgit v1.2.3


From 707b2c247c6c3e8976f94fcf9ab25c85502352d5 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@marvell.com>
Date: Thu, 26 Mar 2009 21:04:10 +0800
Subject: [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP
 defined

arch/arm/plat-pxa/mfp.c is not intended to be use by PXA25x/PXA27x,
make it explicit here only for use by PXA3xx or ARCH_MMP.

Reported-by: Guennadi Liakhovestski <g.liakhovestski@gmx.de>
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/plat-pxa/Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 4be37235f57..8f2c4c7fbd4 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,6 +2,8 @@
 # Makefile for code common across different PXA processor families
 #
 
-obj-y	:= dma.o mfp.o
+obj-y	:= dma.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_PXA3xx)		+= mfp.o
+obj-$(CONFIG_ARCH_MMP)		+= mfp.o
-- 
cgit v1.2.3


From d7fd5f1e3b195a8232b3ed768ac2809ddce8ca46 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:42 +0100
Subject: [S390] fix dump_stack vs. %p and (null)

The s390 implemenation of dump_stack uses %p to display stack content.
Since d97106ab53f812910a62d18afb9dbe882819c1ba (Make %p print '(null)'
for NULL pointers) this causes a strange output for dump_stack:

[...]
Process basename (pid: 8822, task: 00000000b2ece038, ksp: 00000000b24d7b38)
04000000b5685c00 00000000b24d7760 0000000000000002 (null)
00000000b24d7800 00000000b24d7778 00000000b24d7778 00000000001052fe
(null) 00000000b24d7b38 (null) 000000000000000a
000000000000000d (null) 00000000b24d7760 00000000b24d77d8
000000000051a7e8 00000000001052fe 00000000b24d7760 00000000b24d77b0
Call Trace:
[...]

This patch changes our dump_stack to use the appropriate %x format.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/traps.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 4584d81984c..c2e42cc65ce 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -61,9 +61,11 @@ extern pgm_check_handler_t do_asce_exception;
 #define stack_pointer ({ void **sp; asm("la %0,0(15)" : "=&d" (sp)); sp; })
 
 #ifndef CONFIG_64BIT
+#define LONG "%08lx "
 #define FOURLONG "%08lx %08lx %08lx %08lx\n"
 static int kstack_depth_to_print = 12;
 #else /* CONFIG_64BIT */
+#define LONG "%016lx "
 #define FOURLONG "%016lx %016lx %016lx %016lx\n"
 static int kstack_depth_to_print = 20;
 #endif /* CONFIG_64BIT */
@@ -155,7 +157,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 			break;
 		if (i && ((i * sizeof (long) % 32) == 0))
 			printk("\n       ");
-		printk("%p ", (void *)*stack++);
+		printk(LONG, *stack++);
 	}
 	printk("\n");
 	show_trace(task, sp);
-- 
cgit v1.2.3


From 099b765139929efdcf232f8870804accf8c4cdc5 Mon Sep 17 00:00:00 2001
From: Frank Munzert <munzert@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:43 +0100
Subject: [S390] Automatic IPL after dump

Provide new shutdown action "dump_reipl" for automatic ipl after dump.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h | 24 ++++++++++--------
 arch/s390/include/asm/system.h  | 16 ++++++++++++
 arch/s390/kernel/ipl.c          | 56 ++++++++++++++++++++++++++++++++++++++---
 arch/s390/kernel/setup.c        |  5 ++++
 arch/s390/kernel/smp.c          |  9 -------
 5 files changed, 86 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index f3720defdd1..ee4b10ff938 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -111,7 +111,7 @@
 
 #define __LC_PASTE			0xE40
 
-#define __LC_PANIC_MAGIC		0xE00
+#define __LC_DUMP_REIPL			0xE00
 #ifndef __s390x__
 #define __LC_PFAULT_INTPARM             0x080
 #define __LC_CPU_TIMER_SAVE_AREA        0x0D8
@@ -286,12 +286,14 @@ struct _lowcore
 	__u64        int_clock;                /* 0xc98 */
         __u8         pad11[0xe00-0xca0];       /* 0xca0 */
 
-        /* 0xe00 is used as indicator for dump tools */
-        /* whether the kernel died with panic() or not */
-        __u32        panic_magic;              /* 0xe00 */
+	/* 0xe00 contains the address of the IPL Parameter */
+	/* Information block. Dump tools need IPIB for IPL */
+	/* after dump.					   */
+	__u32	     ipib;		       /* 0xe00 */
+	__u32	     ipib_checksum;	       /* 0xe04 */
 
         /* Align to the top 1k of prefix area */
-	__u8         pad12[0x1000-0xe04];      /* 0xe04 */
+	__u8	     pad12[0x1000-0xe08];      /* 0xe08 */
 #else /* !__s390x__ */
         /* prefix area: defined by architecture */
 	__u32        ccw1[2];                  /* 0x000 */
@@ -379,12 +381,14 @@ struct _lowcore
 	__u64        int_clock;                /* 0xde8 */
         __u8         pad12[0xe00-0xdf0];       /* 0xdf0 */
 
-        /* 0xe00 is used as indicator for dump tools */
-        /* whether the kernel died with panic() or not */
-        __u32        panic_magic;              /* 0xe00 */
+	/* 0xe00 contains the address of the IPL Parameter */
+	/* Information block. Dump tools need IPIB for IPL */
+	/* after dump.					   */
+	__u64	     ipib;		       /* 0xe00 */
+	__u32	     ipib_checksum;	       /* 0xe08 */
 
 	/* Per cpu primary space access list */
-	__u8	     pad_0xe04[0xe38-0xe04];   /* 0xe04 */
+	__u8	     pad_0xe0c[0xe38-0xe0c];   /* 0xe0c */
 	__u64	     vdso_per_cpu_data;	       /* 0xe38 */
 	__u32	     paste[16];		       /* 0xe40 */
 
@@ -433,8 +437,6 @@ static inline __u32 store_prefix(void)
 	return address;
 }
 
-#define __PANIC_MAGIC           0xDEADC0DE
-
 #endif
 
 #endif
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 3a8b26eb1f2..3f2ccb82b86 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -458,6 +458,22 @@ static inline unsigned short stap(void)
 	return cpu_address;
 }
 
+static inline u32 cksm(void *addr, unsigned long len)
+{
+	register unsigned long _addr asm("0") = (unsigned long) addr;
+	register unsigned long _len asm("1") = len;
+	unsigned long accu = 0;
+
+	asm volatile(
+		"0:\n"
+		"	cksm	%0,%1\n"
+		"	jnz	0b\n"
+		: "+d" (accu), "+d" (_addr), "+d" (_len)
+		:
+		: "cc", "memory");
+	return accu;
+}
+
 extern void (*_machine_restart)(char *command);
 extern void (*_machine_halt)(void);
 extern void (*_machine_power_off)(void);
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 2dcf590faba..5663c1f8e46 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -56,13 +56,14 @@ struct shutdown_trigger {
 };
 
 /*
- * Five shutdown action types are supported:
+ * The following shutdown action types are supported:
  */
 #define SHUTDOWN_ACTION_IPL_STR		"ipl"
 #define SHUTDOWN_ACTION_REIPL_STR	"reipl"
 #define SHUTDOWN_ACTION_DUMP_STR	"dump"
 #define SHUTDOWN_ACTION_VMCMD_STR	"vmcmd"
 #define SHUTDOWN_ACTION_STOP_STR	"stop"
+#define SHUTDOWN_ACTION_DUMP_REIPL_STR	"dump_reipl"
 
 struct shutdown_action {
 	char *name;
@@ -146,6 +147,7 @@ static enum ipl_method reipl_method = REIPL_METHOD_DEFAULT;
 static struct ipl_parameter_block *reipl_block_fcp;
 static struct ipl_parameter_block *reipl_block_ccw;
 static struct ipl_parameter_block *reipl_block_nss;
+static struct ipl_parameter_block *reipl_block_actual;
 
 static int dump_capabilities = DUMP_TYPE_NONE;
 static enum dump_type dump_type = DUMP_TYPE_NONE;
@@ -835,6 +837,7 @@ static int reipl_set_type(enum ipl_type type)
 			reipl_method = REIPL_METHOD_CCW_VM;
 		else
 			reipl_method = REIPL_METHOD_CCW_CIO;
+		reipl_block_actual = reipl_block_ccw;
 		break;
 	case IPL_TYPE_FCP:
 		if (diag308_set_works)
@@ -843,6 +846,7 @@ static int reipl_set_type(enum ipl_type type)
 			reipl_method = REIPL_METHOD_FCP_RO_VM;
 		else
 			reipl_method = REIPL_METHOD_FCP_RO_DIAG;
+		reipl_block_actual = reipl_block_fcp;
 		break;
 	case IPL_TYPE_FCP_DUMP:
 		reipl_method = REIPL_METHOD_FCP_DUMP;
@@ -852,6 +856,7 @@ static int reipl_set_type(enum ipl_type type)
 			reipl_method = REIPL_METHOD_NSS_DIAG;
 		else
 			reipl_method = REIPL_METHOD_NSS;
+		reipl_block_actual = reipl_block_nss;
 		break;
 	case IPL_TYPE_UNKNOWN:
 		reipl_method = REIPL_METHOD_DEFAULT;
@@ -1332,6 +1337,48 @@ static struct shutdown_action __refdata dump_action = {
 	.init	= dump_init,
 };
 
+static void dump_reipl_run(struct shutdown_trigger *trigger)
+{
+	preempt_disable();
+	/*
+	 * Bypass dynamic address translation (DAT) when storing IPL parameter
+	 * information block address and checksum into the prefix area
+	 * (corresponding to absolute addresses 0-8191).
+	 * When enhanced DAT applies and the STE format control in one,
+	 * the absolute address is formed without prefixing. In this case a
+	 * normal store (stg/st) into the prefix area would no more match to
+	 * absolute addresses 0-8191.
+	 */
+#ifdef CONFIG_64BIT
+	asm volatile("sturg %0,%1"
+		:: "a" ((unsigned long) reipl_block_actual),
+		"a" (&lowcore_ptr[smp_processor_id()]->ipib));
+#else
+	asm volatile("stura %0,%1"
+		:: "a" ((unsigned long) reipl_block_actual),
+		"a" (&lowcore_ptr[smp_processor_id()]->ipib));
+#endif
+	asm volatile("stura %0,%1"
+		:: "a" (cksm(reipl_block_actual, reipl_block_actual->hdr.len)),
+		"a" (&lowcore_ptr[smp_processor_id()]->ipib_checksum));
+	preempt_enable();
+	dump_run(trigger);
+}
+
+static int __init dump_reipl_init(void)
+{
+	if (!diag308_set_works)
+		return -EOPNOTSUPP;
+	else
+		return 0;
+}
+
+static struct shutdown_action __refdata dump_reipl_action = {
+	.name	= SHUTDOWN_ACTION_DUMP_REIPL_STR,
+	.fn	= dump_reipl_run,
+	.init	= dump_reipl_init,
+};
+
 /*
  * vmcmd shutdown action: Trigger vm command on shutdown.
  */
@@ -1421,7 +1468,8 @@ static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR,
 /* action list */
 
 static struct shutdown_action *shutdown_actions_list[] = {
-	&ipl_action, &reipl_action, &dump_action, &vmcmd_action, &stop_action};
+	&ipl_action, &reipl_action, &dump_reipl_action, &dump_action,
+	&vmcmd_action, &stop_action};
 #define SHUTDOWN_ACTIONS_COUNT (sizeof(shutdown_actions_list) / sizeof(void *))
 
 /*
@@ -1434,11 +1482,11 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger,
 		       size_t len)
 {
 	int i;
+
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
 		if (!shutdown_actions_list[i])
 			continue;
-		if (strncmp(buf, shutdown_actions_list[i]->name,
-			    strlen(shutdown_actions_list[i]->name)) == 0) {
+		if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
 			trigger->action = shutdown_actions_list[i];
 			return len;
 		}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index c5cfb6185ea..8fdf08379ce 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -86,6 +86,10 @@ volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
 int __initdata memory_end_set;
 unsigned long __initdata memory_end;
 
+/* An array with a pointer to the lowcore of every CPU. */
+struct _lowcore *lowcore_ptr[NR_CPUS];
+EXPORT_SYMBOL(lowcore_ptr);
+
 /*
  * This is set up by the setup-routine at boot-time
  * for S390 need to find out, what we have to setup
@@ -434,6 +438,7 @@ setup_lowcore(void)
 	lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
 #endif
 	set_prefix((u32)(unsigned long) lc);
+	lowcore_ptr[0] = lc;
 }
 
 static void __init
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2d337cbb932..e279d0fbbbe 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -50,12 +50,6 @@
 #include <asm/vdso.h>
 #include "entry.h"
 
-/*
- * An array with a pointer the lowcore of every CPU.
- */
-struct _lowcore *lowcore_ptr[NR_CPUS];
-EXPORT_SYMBOL(lowcore_ptr);
-
 static struct task_struct *current_set[NR_CPUS];
 
 static u8 smp_cpu_type;
@@ -82,9 +76,6 @@ void smp_send_stop(void)
 	/* Disable all interrupts/machine checks */
 	__load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
 
-	/* write magic number to zero page (absolute 0) */
-	lowcore_ptr[smp_processor_id()]->panic_magic = __PANIC_MAGIC;
-
 	/* stop all processors */
 	for_each_online_cpu(cpu) {
 		if (cpu == smp_processor_id())
-- 
cgit v1.2.3


From 59fa4392dddae244a1148cbbcb090b5a5728f576 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:44 +0100
Subject: [S390] page fault: invoke oom-killer

s390 arch backend for 1c0fe6e3bda0464728c23c8d84aa47567e8b716c
"mm: invoke oom-killer from page fault".

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/fault.c | 28 ++--------------------------
 1 file changed, 2 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 4d537205e83..833e8366c35 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -200,29 +200,6 @@ static void do_low_address(struct pt_regs *regs, unsigned long error_code)
 	do_no_context(regs, error_code, 0);
 }
 
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-static int do_out_of_memory(struct pt_regs *regs, unsigned long error_code,
-			    unsigned long address)
-{
-	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->mm;
-
-	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		return 1;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (regs->psw.mask & PSW_MASK_PSTATE)
-		do_group_exit(SIGKILL);
-	do_no_context(regs, error_code, address);
-	return 0;
-}
-
 static void do_sigbus(struct pt_regs *regs, unsigned long error_code,
 		      unsigned long address)
 {
@@ -367,7 +344,6 @@ good_area:
 			goto bad_area;
 	}
 
-survive:
 	if (is_vm_hugetlb_page(vma))
 		address &= HPAGE_MASK;
 	/*
@@ -378,8 +354,8 @@ survive:
 	fault = handle_mm_fault(mm, vma, address, write);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM) {
-			if (do_out_of_memory(regs, error_code, address))
-				goto survive;
+			up_read(&mm->mmap_sem);
+			pagefault_out_of_memory();
 			return;
 		} else if (fault & VM_FAULT_SIGBUS) {
 			do_sigbus(regs, error_code, address);
-- 
cgit v1.2.3


From b44b0ab3bac16356f03e94b1b49ba9305710c445 Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:47 +0100
Subject: [S390] dasd: add large volume support

The dasd device driver will now support ECKD devices with more then
65520 cylinders.
In the traditional ECKD adressing scheme each track is addressed
by a 16-bit cylinder and 16-bit head number. The new addressing
scheme makes use of the fact that the actual number of heads is
never larger then 15, so 12 bits of the head number can be redefined
to be part of the cylinder address.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/dasd.h | 10 +++++-----
 arch/s390/include/asm/vtoc.h | 16 ++++++++++++++--
 2 files changed, 19 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h
index e2db6f16d9c..218bce81ec7 100644
--- a/arch/s390/include/asm/dasd.h
+++ b/arch/s390/include/asm/dasd.h
@@ -162,15 +162,15 @@ typedef struct dasd_profile_info_t {
         unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */
 } dasd_profile_info_t;
 
-/* 
+/*
  * struct format_data_t
  * represents all data necessary to format a dasd
  */
 typedef struct format_data_t {
-	int start_unit; /* from track */
-	int stop_unit;  /* to track */
-	int blksize;    /* sectorsize */
-        int intensity;  
+	unsigned int start_unit; /* from track */
+	unsigned int stop_unit;  /* to track */
+	unsigned int blksize;	 /* sectorsize */
+	unsigned int intensity;
 } format_data_t;
 
 /*
diff --git a/arch/s390/include/asm/vtoc.h b/arch/s390/include/asm/vtoc.h
index 3a5267d90d2..8406a2b3157 100644
--- a/arch/s390/include/asm/vtoc.h
+++ b/arch/s390/include/asm/vtoc.h
@@ -39,7 +39,7 @@ struct vtoc_labeldate
 	__u16 day;
 } __attribute__ ((packed));
 
-struct vtoc_volume_label
+struct vtoc_volume_label_cdl
 {
 	char volkey[4];		/* volume key = volume label */
 	char vollbl[4];		/* volume label */
@@ -56,6 +56,14 @@ struct vtoc_volume_label
 	char res3[29];		/* reserved */
 } __attribute__ ((packed));
 
+struct vtoc_volume_label_ldl {
+	char vollbl[4];		/* volume label */
+	char volid[6];		/* volume identifier */
+	char res3[69];		/* reserved */
+	char ldl_version;	/* version number, valid for ldl format */
+	__u64 formatted_blocks; /* valid when ldl_version >= f2  */
+} __attribute__ ((packed));
+
 struct vtoc_extent
 {
 	__u8 typeind;			/* extent type indicator */
@@ -140,7 +148,11 @@ struct vtoc_format4_label
 	char res2[10];		/* reserved */
 	__u8 DS4EFLVL;		/* extended free-space management level */
 	struct vtoc_cchhb DS4EFPTR; /* pointer to extended free-space info */
-	char res3[9];		/* reserved */
+	char res3;		/* reserved */
+	__u32 DS4DCYL;		/* number of logical cyls */
+	char res4[2];		/* reserved */
+	__u8 DS4DEVF2;		/* device flags */
+	char res5;		/* reserved */
 } __attribute__ ((packed));
 
 struct vtoc_ds5ext
-- 
cgit v1.2.3


From f3eb5384cf0325c02e306b1d81e70f81a03d7432 Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:48 +0100
Subject: [S390] dasd: add High Performance FICON support

To support High Performance FICON, the DASD device driver has to
translate I/O requests into the new transport mode control words (TCW)
instead of the traditional (command mode) CCW requests.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/idals.h | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/idals.h b/arch/s390/include/asm/idals.h
index e82c10efe65..aae276d0038 100644
--- a/arch/s390/include/asm/idals.h
+++ b/arch/s390/include/asm/idals.h
@@ -44,24 +44,18 @@ idal_is_needed(void *vaddr, unsigned int length)
 /*
  * Return the number of idal words needed for an address/length pair.
  */
-static inline unsigned int
-idal_nr_words(void *vaddr, unsigned int length)
+static inline unsigned int idal_nr_words(void *vaddr, unsigned int length)
 {
-#ifdef __s390x__
-	if (idal_is_needed(vaddr, length))
-		return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + 
-			(IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
-#endif
-	return 0;
+	return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length +
+		(IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
 }
 
 /*
  * Create the list of idal words for an address/length pair.
  */
-static inline unsigned long *
-idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length)
+static inline unsigned long *idal_create_words(unsigned long *idaws,
+					       void *vaddr, unsigned int length)
 {
-#ifdef __s390x__
 	unsigned long paddr;
 	unsigned int cidaw;
 
@@ -74,7 +68,6 @@ idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length)
 		paddr += IDA_BLOCK_SIZE;
 		*idaws++ = paddr;
 	}
-#endif
 	return idaws;
 }
 
-- 
cgit v1.2.3


From 94f5b09d97ee1f803c76d0262e0b0d3791825d09 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:50 +0100
Subject: [S390] move sysinfo.c from drivers/s390 to arch/s390/kernel

All in sysinfo.c is core kernel code and not driver code. So move it
to arch/s390/kernel. Also includes some small cleanups.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/Makefile  |   4 +-
 arch/s390/kernel/sysinfo.c | 428 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 431 insertions(+), 1 deletion(-)
 create mode 100644 arch/s390/kernel/sysinfo.c

(limited to 'arch')

diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 3edc6c6f258..33e7aee7051 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -17,10 +17,12 @@ CFLAGS_smp.o	:= -Wno-nonnull
 #
 CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
+CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
+
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o setup.o \
 	    processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
-	    vdso.o vtime.o
+	    vdso.o vtime.o sysinfo.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
new file mode 100644
index 00000000000..b5e75e1061c
--- /dev/null
+++ b/arch/s390/kernel/sysinfo.c
@@ -0,0 +1,428 @@
+/*
+ *  Copyright IBM Corp. 2001, 2009
+ *  Author(s): Ulrich Weigand <Ulrich.Weigand@de.ibm.com>,
+ *	       Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <asm/ebcdic.h>
+#include <asm/sysinfo.h>
+#include <asm/cpcmd.h>
+
+/* Sigh, math-emu. Don't ask. */
+#include <asm/sfp-util.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/single.h>
+
+static inline int stsi_0(void)
+{
+	int rc = stsi(NULL, 0, 0, 0);
+	return rc == -ENOSYS ? rc : (((unsigned int) rc) >> 28);
+}
+
+static int stsi_1_1_1(struct sysinfo_1_1_1 *info, char *page, int len)
+{
+	if (stsi(info, 1, 1, 1) == -ENOSYS)
+		return len;
+
+	EBCASC(info->manufacturer, sizeof(info->manufacturer));
+	EBCASC(info->type, sizeof(info->type));
+	EBCASC(info->model, sizeof(info->model));
+	EBCASC(info->sequence, sizeof(info->sequence));
+	EBCASC(info->plant, sizeof(info->plant));
+	EBCASC(info->model_capacity, sizeof(info->model_capacity));
+	EBCASC(info->model_perm_cap, sizeof(info->model_perm_cap));
+	EBCASC(info->model_temp_cap, sizeof(info->model_temp_cap));
+	len += sprintf(page + len, "Manufacturer:         %-16.16s\n",
+		       info->manufacturer);
+	len += sprintf(page + len, "Type:                 %-4.4s\n",
+		       info->type);
+	if (info->model[0] != '\0')
+		/*
+		 * Sigh: the model field has been renamed with System z9
+		 * to model_capacity and a new model field has been added
+		 * after the plant field. To avoid confusing older programs
+		 * the "Model:" prints "model_capacity model" or just
+		 * "model_capacity" if the model string is empty .
+		 */
+		len += sprintf(page + len,
+			       "Model:                %-16.16s %-16.16s\n",
+			       info->model_capacity, info->model);
+	else
+		len += sprintf(page + len, "Model:                %-16.16s\n",
+			       info->model_capacity);
+	len += sprintf(page + len, "Sequence Code:        %-16.16s\n",
+		       info->sequence);
+	len += sprintf(page + len, "Plant:                %-4.4s\n",
+		       info->plant);
+	len += sprintf(page + len, "Model Capacity:       %-16.16s %08u\n",
+		       info->model_capacity, *(u32 *) info->model_cap_rating);
+	if (info->model_perm_cap[0] != '\0')
+		len += sprintf(page + len,
+			       "Model Perm. Capacity: %-16.16s %08u\n",
+			       info->model_perm_cap,
+			       *(u32 *) info->model_perm_cap_rating);
+	if (info->model_temp_cap[0] != '\0')
+		len += sprintf(page + len,
+			       "Model Temp. Capacity: %-16.16s %08u\n",
+			       info->model_temp_cap,
+			       *(u32 *) info->model_temp_cap_rating);
+	return len;
+}
+
+static int stsi_1_2_2(struct sysinfo_1_2_2 *info, char *page, int len)
+{
+	struct sysinfo_1_2_2_extension *ext;
+	int i;
+
+	if (stsi(info, 1, 2, 2) == -ENOSYS)
+		return len;
+	ext = (struct sysinfo_1_2_2_extension *)
+		((unsigned long) info + info->acc_offset);
+
+	len += sprintf(page + len, "\n");
+	len += sprintf(page + len, "CPUs Total:           %d\n",
+		       info->cpus_total);
+	len += sprintf(page + len, "CPUs Configured:      %d\n",
+		       info->cpus_configured);
+	len += sprintf(page + len, "CPUs Standby:         %d\n",
+		       info->cpus_standby);
+	len += sprintf(page + len, "CPUs Reserved:        %d\n",
+		       info->cpus_reserved);
+
+	if (info->format == 1) {
+		/*
+		 * Sigh 2. According to the specification the alternate
+		 * capability field is a 32 bit floating point number
+		 * if the higher order 8 bits are not zero. Printing
+		 * a floating point number in the kernel is a no-no,
+		 * always print the number as 32 bit unsigned integer.
+		 * The user-space needs to know about the strange
+		 * encoding of the alternate cpu capability.
+		 */
+		len += sprintf(page + len, "Capability:           %u %u\n",
+			       info->capability, ext->alt_capability);
+		for (i = 2; i <= info->cpus_total; i++)
+			len += sprintf(page + len,
+				       "Adjustment %02d-way:    %u %u\n",
+				       i, info->adjustment[i-2],
+				       ext->alt_adjustment[i-2]);
+
+	} else {
+		len += sprintf(page + len, "Capability:           %u\n",
+			       info->capability);
+		for (i = 2; i <= info->cpus_total; i++)
+			len += sprintf(page + len,
+				       "Adjustment %02d-way:    %u\n",
+				       i, info->adjustment[i-2]);
+	}
+
+	if (info->secondary_capability != 0)
+		len += sprintf(page + len, "Secondary Capability: %d\n",
+			       info->secondary_capability);
+	return len;
+}
+
+static int stsi_2_2_2(struct sysinfo_2_2_2 *info, char *page, int len)
+{
+	if (stsi(info, 2, 2, 2) == -ENOSYS)
+		return len;
+
+	EBCASC(info->name, sizeof(info->name));
+
+	len += sprintf(page + len, "\n");
+	len += sprintf(page + len, "LPAR Number:          %d\n",
+		       info->lpar_number);
+
+	len += sprintf(page + len, "LPAR Characteristics: ");
+	if (info->characteristics & LPAR_CHAR_DEDICATED)
+		len += sprintf(page + len, "Dedicated ");
+	if (info->characteristics & LPAR_CHAR_SHARED)
+		len += sprintf(page + len, "Shared ");
+	if (info->characteristics & LPAR_CHAR_LIMITED)
+		len += sprintf(page + len, "Limited ");
+	len += sprintf(page + len, "\n");
+
+	len += sprintf(page + len, "LPAR Name:            %-8.8s\n",
+		       info->name);
+
+	len += sprintf(page + len, "LPAR Adjustment:      %d\n",
+		       info->caf);
+
+	len += sprintf(page + len, "LPAR CPUs Total:      %d\n",
+		       info->cpus_total);
+	len += sprintf(page + len, "LPAR CPUs Configured: %d\n",
+		       info->cpus_configured);
+	len += sprintf(page + len, "LPAR CPUs Standby:    %d\n",
+		       info->cpus_standby);
+	len += sprintf(page + len, "LPAR CPUs Reserved:   %d\n",
+		       info->cpus_reserved);
+	len += sprintf(page + len, "LPAR CPUs Dedicated:  %d\n",
+		       info->cpus_dedicated);
+	len += sprintf(page + len, "LPAR CPUs Shared:     %d\n",
+		       info->cpus_shared);
+	return len;
+}
+
+static int stsi_3_2_2(struct sysinfo_3_2_2 *info, char *page, int len)
+{
+	int i;
+
+	if (stsi(info, 3, 2, 2) == -ENOSYS)
+		return len;
+	for (i = 0; i < info->count; i++) {
+		EBCASC(info->vm[i].name, sizeof(info->vm[i].name));
+		EBCASC(info->vm[i].cpi, sizeof(info->vm[i].cpi));
+		len += sprintf(page + len, "\n");
+		len += sprintf(page + len, "VM%02d Name:            %-8.8s\n",
+			       i, info->vm[i].name);
+		len += sprintf(page + len, "VM%02d Control Program: %-16.16s\n",
+			       i, info->vm[i].cpi);
+
+		len += sprintf(page + len, "VM%02d Adjustment:      %d\n",
+			       i, info->vm[i].caf);
+
+		len += sprintf(page + len, "VM%02d CPUs Total:      %d\n",
+			       i, info->vm[i].cpus_total);
+		len += sprintf(page + len, "VM%02d CPUs Configured: %d\n",
+			       i, info->vm[i].cpus_configured);
+		len += sprintf(page + len, "VM%02d CPUs Standby:    %d\n",
+			       i, info->vm[i].cpus_standby);
+		len += sprintf(page + len, "VM%02d CPUs Reserved:   %d\n",
+			       i, info->vm[i].cpus_reserved);
+	}
+	return len;
+}
+
+static int proc_read_sysinfo(char *page, char **start,
+			     off_t off, int count,
+			     int *eof, void *data)
+{
+	unsigned long info = get_zeroed_page(GFP_KERNEL);
+	int level, len;
+
+	if (!info)
+		return 0;
+
+	len = 0;
+	level = stsi_0();
+	if (level >= 1)
+		len = stsi_1_1_1((struct sysinfo_1_1_1 *) info, page, len);
+
+	if (level >= 1)
+		len = stsi_1_2_2((struct sysinfo_1_2_2 *) info, page, len);
+
+	if (level >= 2)
+		len = stsi_2_2_2((struct sysinfo_2_2_2 *) info, page, len);
+
+	if (level >= 3)
+		len = stsi_3_2_2((struct sysinfo_3_2_2 *) info, page, len);
+
+	free_page(info);
+	return len;
+}
+
+static __init int create_proc_sysinfo(void)
+{
+	create_proc_read_entry("sysinfo", 0444, NULL,
+			       proc_read_sysinfo, NULL);
+	return 0;
+}
+device_initcall(create_proc_sysinfo);
+
+/*
+ * Service levels interface.
+ */
+
+static DECLARE_RWSEM(service_level_sem);
+static LIST_HEAD(service_level_list);
+
+int register_service_level(struct service_level *slr)
+{
+	struct service_level *ptr;
+
+	down_write(&service_level_sem);
+	list_for_each_entry(ptr, &service_level_list, list)
+		if (ptr == slr) {
+			up_write(&service_level_sem);
+			return -EEXIST;
+		}
+	list_add_tail(&slr->list, &service_level_list);
+	up_write(&service_level_sem);
+	return 0;
+}
+EXPORT_SYMBOL(register_service_level);
+
+int unregister_service_level(struct service_level *slr)
+{
+	struct service_level *ptr, *next;
+	int rc = -ENOENT;
+
+	down_write(&service_level_sem);
+	list_for_each_entry_safe(ptr, next, &service_level_list, list) {
+		if (ptr != slr)
+			continue;
+		list_del(&ptr->list);
+		rc = 0;
+		break;
+	}
+	up_write(&service_level_sem);
+	return rc;
+}
+EXPORT_SYMBOL(unregister_service_level);
+
+static void *service_level_start(struct seq_file *m, loff_t *pos)
+{
+	down_read(&service_level_sem);
+	return seq_list_start(&service_level_list, *pos);
+}
+
+static void *service_level_next(struct seq_file *m, void *p, loff_t *pos)
+{
+	return seq_list_next(p, &service_level_list, pos);
+}
+
+static void service_level_stop(struct seq_file *m, void *p)
+{
+	up_read(&service_level_sem);
+}
+
+static int service_level_show(struct seq_file *m, void *p)
+{
+	struct service_level *slr;
+
+	slr = list_entry(p, struct service_level, list);
+	slr->seq_print(m, slr);
+	return 0;
+}
+
+static const struct seq_operations service_level_seq_ops = {
+	.start		= service_level_start,
+	.next		= service_level_next,
+	.stop		= service_level_stop,
+	.show		= service_level_show
+};
+
+static int service_level_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &service_level_seq_ops);
+}
+
+static const struct file_operations service_level_ops = {
+	.open		= service_level_open,
+	.read		= seq_read,
+	.llseek 	= seq_lseek,
+	.release	= seq_release
+};
+
+static void service_level_vm_print(struct seq_file *m,
+				   struct service_level *slr)
+{
+	char *query_buffer, *str;
+
+	query_buffer = kmalloc(1024, GFP_KERNEL | GFP_DMA);
+	if (!query_buffer)
+		return;
+	cpcmd("QUERY CPLEVEL", query_buffer, 1024, NULL);
+	str = strchr(query_buffer, '\n');
+	if (str)
+		*str = 0;
+	seq_printf(m, "VM: %s\n", query_buffer);
+	kfree(query_buffer);
+}
+
+static struct service_level service_level_vm = {
+	.seq_print = service_level_vm_print
+};
+
+static __init int create_proc_service_level(void)
+{
+	proc_create("service_levels", 0, NULL, &service_level_ops);
+	if (MACHINE_IS_VM)
+		register_service_level(&service_level_vm);
+	return 0;
+}
+subsys_initcall(create_proc_service_level);
+
+/*
+ * Bogomips calculation based on cpu capability.
+ */
+int get_cpu_capability(unsigned int *capability)
+{
+	struct sysinfo_1_2_2 *info;
+	int rc;
+
+	info = (void *) get_zeroed_page(GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	rc = stsi(info, 1, 2, 2);
+	if (rc == -ENOSYS)
+		goto out;
+	rc = 0;
+	*capability = info->capability;
+out:
+	free_page((unsigned long) info);
+	return rc;
+}
+
+/*
+ * CPU capability might have changed. Therefore recalculate loops_per_jiffy.
+ */
+void s390_adjust_jiffies(void)
+{
+	struct sysinfo_1_2_2 *info;
+	const unsigned int fmil = 0x4b189680;	/* 1e7 as 32-bit float. */
+	FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
+	FP_DECL_EX;
+	unsigned int capability;
+
+	info = (void *) get_zeroed_page(GFP_KERNEL);
+	if (!info)
+		return;
+
+	if (stsi(info, 1, 2, 2) != -ENOSYS) {
+		/*
+		 * Major sigh. The cpu capability encoding is "special".
+		 * If the first 9 bits of info->capability are 0 then it
+		 * is a 32 bit unsigned integer in the range 0 .. 2^23.
+		 * If the first 9 bits are != 0 then it is a 32 bit float.
+		 * In addition a lower value indicates a proportionally
+		 * higher cpu capacity. Bogomips are the other way round.
+		 * To get to a halfway suitable number we divide 1e7
+		 * by the cpu capability number. Yes, that means a floating
+		 * point division .. math-emu here we come :-)
+		 */
+		FP_UNPACK_SP(SA, &fmil);
+		if ((info->capability >> 23) == 0)
+			FP_FROM_INT_S(SB, info->capability, 32, int);
+		else
+			FP_UNPACK_SP(SB, &info->capability);
+		FP_DIV_S(SR, SA, SB);
+		FP_TO_INT_S(capability, SR, 32, 0);
+	} else
+		/*
+		 * Really old machine without stsi block for basic
+		 * cpu information. Report 42.0 bogomips.
+		 */
+		capability = 42;
+	loops_per_jiffy = capability * (500000/HZ);
+	free_page((unsigned long) info);
+}
+
+/*
+ * calibrate the delay loop
+ */
+void __cpuinit calibrate_delay(void)
+{
+	s390_adjust_jiffies();
+	/* Print the good old Bogomips line .. */
+	printk(KERN_DEBUG "Calibrating delay loop (skipped)... "
+	       "%lu.%02lu BogoMIPS preset\n", loops_per_jiffy/(500000/HZ),
+	       (loops_per_jiffy/(5000/HZ)) % 100);
+}
-- 
cgit v1.2.3


From cbdc229245e8cf5c201e68221ebf2f33d2aaf029 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:52 +0100
Subject: [S390] arch/s390/kernel/process.c: fix whitespace damage

Fix all the whitespace damage in process.c, especially copy_thread().
Next patch will add code to copy_thread() which needs to 'fixed' first.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/process.c | 64 +++++++++++++++++++---------------------------
 1 file changed, 27 insertions(+), 37 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 5cd38a90e64..e0563baa1cf 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -1,18 +1,10 @@
 /*
- *  arch/s390/kernel/process.c
+ * This file handles the architecture dependent parts of process handling.
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Hartmut Penner (hp@de.ibm.com),
- *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *
- *  Derived from "arch/i386/kernel/process.c"
- *    Copyright (C) 1995, Linus Torvalds
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
+ *    Copyright IBM Corp. 1999,2009
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Hartmut Penner <hp@de.ibm.com>,
+ *		 Denis Joseph Barrow,
  */
 
 #include <linux/compiler.h>
@@ -168,34 +160,34 @@ void release_thread(struct task_struct *dead_task)
 }
 
 int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
-	unsigned long unused,
-        struct task_struct * p, struct pt_regs * regs)
+		unsigned long unused,
+		struct task_struct *p, struct pt_regs *regs)
 {
-        struct fake_frame
-          {
-	    struct stack_frame sf;
-            struct pt_regs childregs;
-          } *frame;
-
-        frame = container_of(task_pt_regs(p), struct fake_frame, childregs);
-        p->thread.ksp = (unsigned long) frame;
+	struct fake_frame
+	{
+		struct stack_frame sf;
+		struct pt_regs childregs;
+	} *frame;
+
+	frame = container_of(task_pt_regs(p), struct fake_frame, childregs);
+	p->thread.ksp = (unsigned long) frame;
 	/* Store access registers to kernel stack of new process. */
-        frame->childregs = *regs;
+	frame->childregs = *regs;
 	frame->childregs.gprs[2] = 0;	/* child returns 0 on fork. */
-        frame->childregs.gprs[15] = new_stackp;
-        frame->sf.back_chain = 0;
+	frame->childregs.gprs[15] = new_stackp;
+	frame->sf.back_chain = 0;
 
-        /* new return point is ret_from_fork */
-        frame->sf.gprs[8] = (unsigned long) ret_from_fork;
+	/* new return point is ret_from_fork */
+	frame->sf.gprs[8] = (unsigned long) ret_from_fork;
 
-        /* fake return stack for resume(), don't go back to schedule */
-        frame->sf.gprs[9] = (unsigned long) frame;
+	/* fake return stack for resume(), don't go back to schedule */
+	frame->sf.gprs[9] = (unsigned long) frame;
 
 	/* Save access registers to new thread structure. */
 	save_access_regs(&p->thread.acrs[0]);
 
 #ifndef CONFIG_64BIT
-        /*
+	/*
 	 * save fprs to current->thread.fp_regs to merge them with
 	 * the emulated registers and then copy the result to the child.
 	 */
@@ -220,10 +212,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
 #endif /* CONFIG_64BIT */
 	/* start new process with ar4 pointing to the correct address space */
 	p->thread.mm_segment = get_fs();
-        /* Don't copy debug registers */
-        memset(&p->thread.per_info,0,sizeof(p->thread.per_info));
-
-        return 0;
+	/* Don't copy debug registers */
+	memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+	return 0;
 }
 
 SYSCALL_DEFINE0(fork)
@@ -311,7 +302,7 @@ out:
 int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs)
 {
 #ifndef CONFIG_64BIT
-        /*
+	/*
 	 * save fprs to current->thread.fp_regs to merge them with
 	 * the emulated registers and then copy the result to the dump.
 	 */
@@ -346,4 +337,3 @@ unsigned long get_wchan(struct task_struct *p)
 	}
 	return 0;
 }
-
-- 
cgit v1.2.3


From 5168ce2c647f02756803bef7b74906f485491a1c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:53 +0100
Subject: [S390] cputime: initialize per thread timer values on fork

Initialize per thread timer values instead of just copying them from
the parent. That way it is easily possible to tell how much time a
thread spent in user/system context.
Doesn't fix a bug, this is just for debugging purposes.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/process.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index e0563baa1cf..e6b480625cb 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -163,6 +163,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
 		unsigned long unused,
 		struct task_struct *p, struct pt_regs *regs)
 {
+	struct thread_info *ti;
 	struct fake_frame
 	{
 		struct stack_frame sf;
@@ -214,6 +215,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
 	p->thread.mm_segment = get_fs();
 	/* Don't copy debug registers */
 	memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+	/* Initialize per thread user and system timer values */
+	ti = task_thread_info(p);
+	ti->user_timer = 0;
+	ti->system_timer = 0;
 	return 0;
 }
 
-- 
cgit v1.2.3


From 3324e60aafa9aeb1009878d45079b67367a5e2b6 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:56 +0100
Subject: [S390] lockdep: trace hardirq off in smp_send_stop

With lockdep we got the following trace after a panic:

Badness at /home/autobuild/BUILD/linux-2.6.28-20090204/kernel/lockdep.c:2878
[...]
Call Trace:
 [<0000000000176334>] lock_acquire+0x54/0xbc
 [<000000000050b4fe>] __atomic_notifier_call_chain+0x6e/0xdc
 [<000000000050b59c>] atomic_notifier_call_chain+0x30/0x44
 [<0000000000504274>] panic+0xd0/0x1e8
[...]
INFO: lockdep is turned off.
Last Breaking-Event-Address:
 [<0000000000170e62>] check_flags+0xae/0x15c
possible reason: unannotated irqs-off.

lockdep is right. We missed a trace_hardirq_off in our smp_send_stop
function and smp_send_stop is called before the panic call chain.

Reported-by: Mijo <Safradin mijo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index e279d0fbbbe..a8858634dd0 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/cache.h>
 #include <linux/interrupt.h>
+#include <linux/irqflags.h>
 #include <linux/cpu.h>
 #include <linux/timex.h>
 #include <linux/bootmem.h>
@@ -75,6 +76,7 @@ void smp_send_stop(void)
 
 	/* Disable all interrupts/machine checks */
 	__load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
+	trace_hardirqs_off();
 
 	/* stop all processors */
 	for_each_online_cpu(cpu) {
-- 
cgit v1.2.3


From 702d9e584feb028ed7e2a6d2b103b8ea57622ff2 Mon Sep 17 00:00:00 2001
From: Carsten Otte <cotte@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:57 +0100
Subject: [S390] check addressing mode in s390_enable_sie

The sie instruction requires address spaces to be switched
to run proper. This patch verifies that this is the case
in s390_enable_sie, otherwise the kernel would crash badly
as soon as the process runs into sie.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/pgtable.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 6b6ddc4ea02..9bf86125f6f 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -258,6 +258,10 @@ int s390_enable_sie(void)
 	struct task_struct *tsk = current;
 	struct mm_struct *mm, *old_mm;
 
+	/* Do we have switched amode? If no, we cannot do sie */
+	if (!switch_amode)
+		return -EINVAL;
+
 	/* Do we have pgstes? if yes, we are done */
 	if (tsk->mm->context.has_pgste)
 		return 0;
-- 
cgit v1.2.3


From 92e6ecf392fac3082653ac9d84b1bdf53d0ea160 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 26 Mar 2009 15:23:58 +0100
Subject: [S390] Fix hypervisor detection for KVM

Currently we use the cpuid (via STIDP instruction) to recognize LPAR,
z/VM and KVM.
The architecture states, that bit 0-7 of STIDP returns all zero, and
if STIDP is executed in a virtual machine, the VM operating system
will replace bits 0-7 with FF.

KVM should not use FE to distinguish z/VM from KVM for interested
guests. The proper way to detect the hypervisor is the STSI (Store
System Information) instruction, which return information about the
hypervisors via function code 3, selector1=2, selector2=2.

This patch changes the detection routine of Linux to use STSI instead
of STIDP. This detection is earlier than bootmem, we have to use a
static buffer. Since STSI expects a 4kb block (4kb aligned) this
patch also changes the init.data alignment for s390. As this section
will be freed during boot, this should be no problem.

Patch is tested with LPAR, z/VM, KVM on LPAR, and KVM under z/VM.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/sysinfo.h |  1 +
 arch/s390/kernel/early.c        | 22 +++++++++++++---------
 arch/s390/kernel/vmlinux.lds.S  |  2 ++
 arch/s390/kvm/kvm-s390.c        |  2 +-
 4 files changed, 17 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index ad93212d9e1..9d70057d828 100644
--- a/arch/s390/include/asm/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
@@ -100,6 +100,7 @@ struct sysinfo_3_2_2 {
 		char reserved_1[24];
 
 	} vm[8];
+	char reserved_544[3552];
 };
 
 static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 2a2ca268b1d..d61eb3334ed 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -6,6 +6,7 @@
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
+#include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -20,6 +21,7 @@
 #include <asm/processor.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/sysinfo.h>
 #include <asm/cpcmd.h>
 #include <asm/sclp.h>
 #include "entry.h"
@@ -173,19 +175,21 @@ static noinline __init void init_kernel_storage_key(void)
 		page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY);
 }
 
+static __initdata struct sysinfo_3_2_2 vmms __aligned(PAGE_SIZE);
+
 static noinline __init void detect_machine_type(void)
 {
-	struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data;
-
-	get_cpu_id(&S390_lowcore.cpu_data.cpu_id);
-
-	/* Running under z/VM ? */
-	if (cpuinfo->cpu_id.version == 0xff)
-		machine_flags |= MACHINE_FLAG_VM;
+	/* No VM information? Looks like LPAR */
+	if (stsi(&vmms, 3, 2, 2) == -ENOSYS)
+		return;
+	if (!vmms.count)
+		return;
 
-	/* Running under KVM ? */
-	if (cpuinfo->cpu_id.version == 0xfe)
+	/* Running under KVM? If not we assume z/VM */
+	if (!memcmp(vmms.vm[0].cpi, "\xd2\xe5\xd4", 3))
 		machine_flags |= MACHINE_FLAG_KVM;
+	else
+		machine_flags |= MACHINE_FLAG_VM;
 }
 
 static __init void early_pgm_check_handler(void)
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index d796d05c9c0..7a2063eb88f 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -108,6 +108,8 @@ SECTIONS
 		EXIT_TEXT
 	}
 
+	/* early.c uses stsi, which requires page aligned data. */
+	. = ALIGN(PAGE_SIZE);
 	.init.data : {
 		INIT_DATA
 	}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0d33893e1e8..c55a4b9ffd8 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -286,7 +286,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup,
 		 (unsigned long) vcpu);
 	get_cpu_id(&vcpu->arch.cpu_id);
-	vcpu->arch.cpu_id.version = 0xfe;
+	vcpu->arch.cpu_id.version = 0xff;
 	return 0;
 }
 
-- 
cgit v1.2.3


From 70193af9188113c9b4ff3dde1aed9f9c8f7c4f93 Mon Sep 17 00:00:00 2001
From: Sachin Sant <sachinp@in.ibm.com>
Date: Thu, 26 Mar 2009 15:24:00 +0100
Subject: [S390] Fix appldata build break with !NET

With CONFIG_NET not set appldata build breaks on s390.

arch/s390/appldata/built-in.o: In function appldata_get_net_sum_data:
appldata_net_sum.c:(.text+0x2684): undefined reference to dev_get_stats
appldata_net_sum.c:(.text+0x2688): undefined reference to init_net
appldata_net_sum.c:(.text+0x268c): undefined reference to init_net
appldata_net_sum.c:(.text+0x2694): undefined reference to dev_base_lock

The following patch fixes the issue for me.

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 6b0a3538dc6..3f470604a89 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -521,7 +521,7 @@ config APPLDATA_OS
 
 config APPLDATA_NET_SUM
 	tristate "Monitor overall network statistics"
-	depends on APPLDATA_BASE
+	depends on APPLDATA_BASE && NET
 	help
 	  This provides network related data to the Linux - VM Monitor Stream,
 	  currently there is only a total sum of network I/O statistics, no
-- 
cgit v1.2.3


From f5daba1d4116d964435ddd99f32b6c80448a496b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:01 +0100
Subject: [S390] split/move machine check handler code

Split machine check handler code and move it to cio and kernel code
where it belongs to. No functional change.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/crw.h |  68 ++++++++
 arch/s390/include/asm/nmi.h |  66 ++++++++
 arch/s390/kernel/Makefile   |   2 +-
 arch/s390/kernel/nmi.c      | 383 ++++++++++++++++++++++++++++++++++++++++++++
 arch/s390/kernel/process.c  |   2 +-
 arch/s390/kvm/kvm-s390.c    |   4 +-
 6 files changed, 520 insertions(+), 5 deletions(-)
 create mode 100644 arch/s390/include/asm/crw.h
 create mode 100644 arch/s390/include/asm/nmi.h
 create mode 100644 arch/s390/kernel/nmi.c

(limited to 'arch')

diff --git a/arch/s390/include/asm/crw.h b/arch/s390/include/asm/crw.h
new file mode 100644
index 00000000000..2185a6d619d
--- /dev/null
+++ b/arch/s390/include/asm/crw.h
@@ -0,0 +1,68 @@
+/*
+ *   Data definitions for channel report processing
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Ingo Adlung <adlung@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Cornelia Huck <cornelia.huck@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
+ */
+
+#ifndef _ASM_S390_CRW_H
+#define _ASM_S390_CRW_H
+
+#include <linux/types.h>
+
+/*
+ * Channel Report Word
+ */
+struct crw {
+	__u32 res1 :  1;   /* reserved zero */
+	__u32 slct :  1;   /* solicited */
+	__u32 oflw :  1;   /* overflow */
+	__u32 chn  :  1;   /* chained */
+	__u32 rsc  :  4;   /* reporting source code */
+	__u32 anc  :  1;   /* ancillary report */
+	__u32 res2 :  1;   /* reserved zero */
+	__u32 erc  :  6;   /* error-recovery code */
+	__u32 rsid : 16;   /* reporting-source ID */
+} __attribute__ ((packed));
+
+typedef void (*crw_handler_t)(struct crw *, struct crw *, int);
+
+extern int crw_register_handler(int rsc, crw_handler_t handler);
+extern void crw_unregister_handler(int rsc);
+extern void crw_handle_channel_report(void);
+
+#define NR_RSCS 16
+
+#define CRW_RSC_MONITOR  0x2  /* monitoring facility */
+#define CRW_RSC_SCH	 0x3  /* subchannel */
+#define CRW_RSC_CPATH	 0x4  /* channel path */
+#define CRW_RSC_CONFIG	 0x9  /* configuration-alert facility */
+#define CRW_RSC_CSS	 0xB  /* channel subsystem */
+
+#define CRW_ERC_EVENT	 0x00 /* event information pending */
+#define CRW_ERC_AVAIL	 0x01 /* available */
+#define CRW_ERC_INIT	 0x02 /* initialized */
+#define CRW_ERC_TERROR	 0x03 /* temporary error */
+#define CRW_ERC_IPARM	 0x04 /* installed parm initialized */
+#define CRW_ERC_TERM	 0x05 /* terminal */
+#define CRW_ERC_PERRN	 0x06 /* perm. error, fac. not init */
+#define CRW_ERC_PERRI	 0x07 /* perm. error, facility init */
+#define CRW_ERC_PMOD	 0x08 /* installed parameters modified */
+
+static inline int stcrw(struct crw *pcrw)
+{
+	int ccode;
+
+	asm volatile(
+		"	stcrw	0(%2)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode), "=m" (*pcrw)
+		: "a" (pcrw)
+		: "cc" );
+	return ccode;
+}
+
+#endif /* _ASM_S390_CRW_H */
diff --git a/arch/s390/include/asm/nmi.h b/arch/s390/include/asm/nmi.h
new file mode 100644
index 00000000000..f4b60441adc
--- /dev/null
+++ b/arch/s390/include/asm/nmi.h
@@ -0,0 +1,66 @@
+/*
+ *   Machine check handler definitions
+ *
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Ingo Adlung <adlung@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Cornelia Huck <cornelia.huck@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
+ */
+
+#ifndef _ASM_S390_NMI_H
+#define _ASM_S390_NMI_H
+
+#include <linux/types.h>
+
+struct mci {
+	__u32 sd :  1; /* 00 system damage */
+	__u32 pd :  1; /* 01 instruction-processing damage */
+	__u32 sr :  1; /* 02 system recovery */
+	__u32	 :  1; /* 03 */
+	__u32 cd :  1; /* 04 timing-facility damage */
+	__u32 ed :  1; /* 05 external damage */
+	__u32	 :  1; /* 06 */
+	__u32 dg :  1; /* 07 degradation */
+	__u32 w  :  1; /* 08 warning pending */
+	__u32 cp :  1; /* 09 channel-report pending */
+	__u32 sp :  1; /* 10 service-processor damage */
+	__u32 ck :  1; /* 11 channel-subsystem damage */
+	__u32	 :  2; /* 12-13 */
+	__u32 b  :  1; /* 14 backed up */
+	__u32	 :  1; /* 15 */
+	__u32 se :  1; /* 16 storage error uncorrected */
+	__u32 sc :  1; /* 17 storage error corrected */
+	__u32 ke :  1; /* 18 storage-key error uncorrected */
+	__u32 ds :  1; /* 19 storage degradation */
+	__u32 wp :  1; /* 20 psw mwp validity */
+	__u32 ms :  1; /* 21 psw mask and key validity */
+	__u32 pm :  1; /* 22 psw program mask and cc validity */
+	__u32 ia :  1; /* 23 psw instruction address validity */
+	__u32 fa :  1; /* 24 failing storage address validity */
+	__u32	 :  1; /* 25 */
+	__u32 ec :  1; /* 26 external damage code validity */
+	__u32 fp :  1; /* 27 floating point register validity */
+	__u32 gr :  1; /* 28 general register validity */
+	__u32 cr :  1; /* 29 control register validity */
+	__u32	 :  1; /* 30 */
+	__u32 st :  1; /* 31 storage logical validity */
+	__u32 ie :  1; /* 32 indirect storage error */
+	__u32 ar :  1; /* 33 access register validity */
+	__u32 da :  1; /* 34 delayed access exception */
+	__u32	 :  7; /* 35-41 */
+	__u32 pr :  1; /* 42 tod programmable register validity */
+	__u32 fc :  1; /* 43 fp control register validity */
+	__u32 ap :  1; /* 44 ancillary report */
+	__u32	 :  1; /* 45 */
+	__u32 ct :  1; /* 46 cpu timer validity */
+	__u32 cc :  1; /* 47 clock comparator validity */
+	__u32	 : 16; /* 47-63 */
+};
+
+struct pt_regs;
+
+extern void s390_handle_mcck(void);
+extern void s390_do_machine_check(struct pt_regs *regs);
+
+#endif /* _ASM_S390_NMI_H */
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 33e7aee7051..228e3105ded 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -22,7 +22,7 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o setup.o \
 	    processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
 	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \
-	    vdso.o vtime.o sysinfo.o
+	    vdso.o vtime.o sysinfo.o nmi.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
new file mode 100644
index 00000000000..8d50eaf76a6
--- /dev/null
+++ b/arch/s390/kernel/nmi.c
@@ -0,0 +1,383 @@
+/*
+ *   Machine check handler
+ *
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Ingo Adlung <adlung@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Cornelia Huck <cornelia.huck@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/module.h>
+#include <asm/lowcore.h>
+#include <asm/smp.h>
+#include <asm/etr.h>
+#include <asm/cpu.h>
+#include <asm/nmi.h>
+#include <asm/crw.h>
+
+struct mcck_struct {
+	int kill_task;
+	int channel_report;
+	int warning;
+	unsigned long long mcck_code;
+};
+
+static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck);
+
+static NORET_TYPE void s390_handle_damage(char *msg)
+{
+	smp_send_stop();
+	disabled_wait((unsigned long) __builtin_return_address(0));
+	while (1);
+}
+
+/*
+ * Main machine check handler function. Will be called with interrupts enabled
+ * or disabled and machine checks enabled or disabled.
+ */
+void s390_handle_mcck(void)
+{
+	unsigned long flags;
+	struct mcck_struct mcck;
+
+	/*
+	 * Disable machine checks and get the current state of accumulated
+	 * machine checks. Afterwards delete the old state and enable machine
+	 * checks again.
+	 */
+	local_irq_save(flags);
+	local_mcck_disable();
+	mcck = __get_cpu_var(cpu_mcck);
+	memset(&__get_cpu_var(cpu_mcck), 0, sizeof(struct mcck_struct));
+	clear_thread_flag(TIF_MCCK_PENDING);
+	local_mcck_enable();
+	local_irq_restore(flags);
+
+	if (mcck.channel_report)
+		crw_handle_channel_report();
+
+#ifdef CONFIG_MACHCHK_WARNING
+/*
+ * The warning may remain for a prolonged period on the bare iron.
+ * (actually till the machine is powered off, or until the problem is gone)
+ * So we just stop listening for the WARNING MCH and prevent continuously
+ * being interrupted.  One caveat is however, that we must do this per
+ * processor and cannot use the smp version of ctl_clear_bit().
+ * On VM we only get one interrupt per virtally presented machinecheck.
+ * Though one suffices, we may get one interrupt per (virtual) processor.
+ */
+	if (mcck.warning) {	/* WARNING pending ? */
+		static int mchchk_wng_posted = 0;
+		/*
+		 * Use single machine clear, as we cannot handle smp right now
+		 */
+		__ctl_clear_bit(14, 24);	/* Disable WARNING MCH */
+		if (xchg(&mchchk_wng_posted, 1) == 0)
+			kill_cad_pid(SIGPWR, 1);
+	}
+#endif
+
+	if (mcck.kill_task) {
+		local_irq_enable();
+		printk(KERN_EMERG "mcck: Terminating task because of machine "
+		       "malfunction (code 0x%016llx).\n", mcck.mcck_code);
+		printk(KERN_EMERG "mcck: task: %s, pid: %d.\n",
+		       current->comm, current->pid);
+		do_exit(SIGSEGV);
+	}
+}
+EXPORT_SYMBOL_GPL(s390_handle_mcck);
+
+/*
+ * returns 0 if all registers could be validated
+ * returns 1 otherwise
+ */
+static int notrace s390_revalidate_registers(struct mci *mci)
+{
+	int kill_task;
+	u64 tmpclock;
+	u64 zero;
+	void *fpt_save_area, *fpt_creg_save_area;
+
+	kill_task = 0;
+	zero = 0;
+
+	if (!mci->gr) {
+		/*
+		 * General purpose registers couldn't be restored and have
+		 * unknown contents. Process needs to be terminated.
+		 */
+		kill_task = 1;
+	}
+	if (!mci->fp) {
+		/*
+		 * Floating point registers can't be restored and
+		 * therefore the process needs to be terminated.
+		 */
+		kill_task = 1;
+	}
+#ifndef CONFIG_64BIT
+	asm volatile(
+		"	ld	0,0(%0)\n"
+		"	ld	2,8(%0)\n"
+		"	ld	4,16(%0)\n"
+		"	ld	6,24(%0)"
+		: : "a" (&S390_lowcore.floating_pt_save_area));
+#endif
+
+	if (MACHINE_HAS_IEEE) {
+#ifdef CONFIG_64BIT
+		fpt_save_area = &S390_lowcore.floating_pt_save_area;
+		fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area;
+#else
+		fpt_save_area = (void *) S390_lowcore.extended_save_area_addr;
+		fpt_creg_save_area = fpt_save_area + 128;
+#endif
+		if (!mci->fc) {
+			/*
+			 * Floating point control register can't be restored.
+			 * Task will be terminated.
+			 */
+			asm volatile("lfpc 0(%0)" : : "a" (&zero), "m" (zero));
+			kill_task = 1;
+
+		} else
+			asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
+
+		asm volatile(
+			"	ld	0,0(%0)\n"
+			"	ld	1,8(%0)\n"
+			"	ld	2,16(%0)\n"
+			"	ld	3,24(%0)\n"
+			"	ld	4,32(%0)\n"
+			"	ld	5,40(%0)\n"
+			"	ld	6,48(%0)\n"
+			"	ld	7,56(%0)\n"
+			"	ld	8,64(%0)\n"
+			"	ld	9,72(%0)\n"
+			"	ld	10,80(%0)\n"
+			"	ld	11,88(%0)\n"
+			"	ld	12,96(%0)\n"
+			"	ld	13,104(%0)\n"
+			"	ld	14,112(%0)\n"
+			"	ld	15,120(%0)\n"
+			: : "a" (fpt_save_area));
+	}
+	/* Revalidate access registers */
+	asm volatile(
+		"	lam	0,15,0(%0)"
+		: : "a" (&S390_lowcore.access_regs_save_area));
+	if (!mci->ar) {
+		/*
+		 * Access registers have unknown contents.
+		 * Terminating task.
+		 */
+		kill_task = 1;
+	}
+	/* Revalidate control registers */
+	if (!mci->cr) {
+		/*
+		 * Control registers have unknown contents.
+		 * Can't recover and therefore stopping machine.
+		 */
+		s390_handle_damage("invalid control registers.");
+	} else {
+#ifdef CONFIG_64BIT
+		asm volatile(
+			"	lctlg	0,15,0(%0)"
+			: : "a" (&S390_lowcore.cregs_save_area));
+#else
+		asm volatile(
+			"	lctl	0,15,0(%0)"
+			: : "a" (&S390_lowcore.cregs_save_area));
+#endif
+	}
+	/*
+	 * We don't even try to revalidate the TOD register, since we simply
+	 * can't write something sensible into that register.
+	 */
+#ifdef CONFIG_64BIT
+	/*
+	 * See if we can revalidate the TOD programmable register with its
+	 * old contents (should be zero) otherwise set it to zero.
+	 */
+	if (!mci->pr)
+		asm volatile(
+			"	sr	0,0\n"
+			"	sckpf"
+			: : : "0", "cc");
+	else
+		asm volatile(
+			"	l	0,0(%0)\n"
+			"	sckpf"
+			: : "a" (&S390_lowcore.tod_progreg_save_area)
+			: "0", "cc");
+#endif
+	/* Revalidate clock comparator register */
+	asm volatile(
+		"	stck	0(%1)\n"
+		"	sckc	0(%1)"
+		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
+
+	/* Check if old PSW is valid */
+	if (!mci->wp)
+		/*
+		 * Can't tell if we come from user or kernel mode
+		 * -> stopping machine.
+		 */
+		s390_handle_damage("old psw invalid.");
+
+	if (!mci->ms || !mci->pm || !mci->ia)
+		kill_task = 1;
+
+	return kill_task;
+}
+
+#define MAX_IPD_COUNT	29
+#define MAX_IPD_TIME	(5 * 60 * USEC_PER_SEC) /* 5 minutes */
+
+#define ED_STP_ISLAND	6	/* External damage STP island check */
+#define ED_STP_SYNC	7	/* External damage STP sync check */
+#define ED_ETR_SYNC	12	/* External damage ETR sync check */
+#define ED_ETR_SWITCH	13	/* External damage ETR switch to local */
+
+/*
+ * machine check handler.
+ */
+void notrace s390_do_machine_check(struct pt_regs *regs)
+{
+	static int ipd_count;
+	static DEFINE_SPINLOCK(ipd_lock);
+	static unsigned long long last_ipd;
+	struct mcck_struct *mcck;
+	unsigned long long tmp;
+	struct mci *mci;
+	int umode;
+
+	lockdep_off();
+	s390_idle_check();
+
+	mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
+	mcck = &__get_cpu_var(cpu_mcck);
+	umode = user_mode(regs);
+
+	if (mci->sd) {
+		/* System damage -> stopping machine */
+		s390_handle_damage("received system damage machine check.");
+	}
+	if (mci->pd) {
+		if (mci->b) {
+			/* Processing backup -> verify if we can survive this */
+			u64 z_mcic, o_mcic, t_mcic;
+#ifdef CONFIG_64BIT
+			z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<29);
+			o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 |
+				  1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
+				  1ULL<<30 | 1ULL<<21 | 1ULL<<20 | 1ULL<<17 |
+				  1ULL<<16);
+#else
+			z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<57 | 1ULL<<50 |
+				  1ULL<<29);
+			o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 |
+				  1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
+				  1ULL<<30 | 1ULL<<20 | 1ULL<<17 | 1ULL<<16);
+#endif
+			t_mcic = *(u64 *)mci;
+
+			if (((t_mcic & z_mcic) != 0) ||
+			    ((t_mcic & o_mcic) != o_mcic)) {
+				s390_handle_damage("processing backup machine "
+						   "check with damage.");
+			}
+
+			/*
+			 * Nullifying exigent condition, therefore we might
+			 * retry this instruction.
+			 */
+			spin_lock(&ipd_lock);
+			tmp = get_clock();
+			if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME)
+				ipd_count++;
+			else
+				ipd_count = 1;
+			last_ipd = tmp;
+			if (ipd_count == MAX_IPD_COUNT)
+				s390_handle_damage("too many ipd retries.");
+			spin_unlock(&ipd_lock);
+		} else {
+			/* Processing damage -> stopping machine */
+			s390_handle_damage("received instruction processing "
+					   "damage machine check.");
+		}
+	}
+	if (s390_revalidate_registers(mci)) {
+		if (umode) {
+			/*
+			 * Couldn't restore all register contents while in
+			 * user mode -> mark task for termination.
+			 */
+			mcck->kill_task = 1;
+			mcck->mcck_code = *(unsigned long long *) mci;
+			set_thread_flag(TIF_MCCK_PENDING);
+		} else {
+			/*
+			 * Couldn't restore all register contents while in
+			 * kernel mode -> stopping machine.
+			 */
+			s390_handle_damage("unable to revalidate registers.");
+		}
+	}
+	if (mci->cd) {
+		/* Timing facility damage */
+		s390_handle_damage("TOD clock damaged");
+	}
+	if (mci->ed && mci->ec) {
+		/* External damage */
+		if (S390_lowcore.external_damage_code & (1U << ED_ETR_SYNC))
+			etr_sync_check();
+		if (S390_lowcore.external_damage_code & (1U << ED_ETR_SWITCH))
+			etr_switch_to_local();
+		if (S390_lowcore.external_damage_code & (1U << ED_STP_SYNC))
+			stp_sync_check();
+		if (S390_lowcore.external_damage_code & (1U << ED_STP_ISLAND))
+			stp_island_check();
+	}
+	if (mci->se)
+		/* Storage error uncorrected */
+		s390_handle_damage("received storage error uncorrected "
+				   "machine check.");
+	if (mci->ke)
+		/* Storage key-error uncorrected */
+		s390_handle_damage("received storage key-error uncorrected "
+				   "machine check.");
+	if (mci->ds && mci->fa)
+		/* Storage degradation */
+		s390_handle_damage("received storage degradation machine "
+				   "check.");
+	if (mci->cp) {
+		/* Channel report word pending */
+		mcck->channel_report = 1;
+		set_thread_flag(TIF_MCCK_PENDING);
+	}
+	if (mci->w) {
+		/* Warning pending */
+		mcck->warning = 1;
+		set_thread_flag(TIF_MCCK_PENDING);
+	}
+	lockdep_on();
+}
+
+static int __init machine_check_init(void)
+{
+	ctl_set_bit(14, 25);	/* enable external damage MCH */
+	ctl_set_bit(14, 27);	/* enable system recovery MCH */
+#ifdef CONFIG_MACHCHK_WARNING
+	ctl_set_bit(14, 24);	/* enable warning MCH */
+#endif
+	return 0;
+}
+arch_initcall(machine_check_init);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index e6b480625cb..bd616fb31e7 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -39,6 +39,7 @@
 #include <asm/processor.h>
 #include <asm/irq.h>
 #include <asm/timer.h>
+#include <asm/nmi.h>
 #include "entry.h"
 
 asmlinkage void ret_from_fork(void) asm ("ret_from_fork");
@@ -68,7 +69,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sf->gprs[8];
 }
 
-extern void s390_handle_mcck(void);
 /*
  * The idle loop on a S390...
  */
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c55a4b9ffd8..caa4d287701 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -23,7 +23,7 @@
 #include <linux/timer.h>
 #include <asm/lowcore.h>
 #include <asm/pgtable.h>
-
+#include <asm/nmi.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -440,8 +440,6 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	return -EINVAL; /* not implemented yet */
 }
 
-extern void s390_handle_mcck(void);
-
 static void __vcpu_run(struct kvm_vcpu *vcpu)
 {
 	memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16);
-- 
cgit v1.2.3


From 7b886416dfd76df9dd7304868556b1d82cf38890 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:02 +0100
Subject: [S390] Remove CONFIG_MACHCHK_WARNING.

Everybody enables it so there is no point for an extra config option.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig      |  7 -------
 arch/s390/kernel/nmi.c | 29 +++++++++++------------------
 2 files changed, 11 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 3f470604a89..0a9463bea75 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -343,13 +343,6 @@ source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
 
-config MACHCHK_WARNING
-	bool "Process warning machine checks"
-	help
-	  Select this option if you want the machine check handler on IBM S/390 or
-	  zSeries to process warning machine checks (e.g. on power failures).
-	  If unsure, say "Y".
-
 config QDIO
 	tristate "QDIO support"
 	---help---
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 8d50eaf76a6..4bfdc421d7e 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -59,28 +59,23 @@ void s390_handle_mcck(void)
 
 	if (mcck.channel_report)
 		crw_handle_channel_report();
-
-#ifdef CONFIG_MACHCHK_WARNING
-/*
- * The warning may remain for a prolonged period on the bare iron.
- * (actually till the machine is powered off, or until the problem is gone)
- * So we just stop listening for the WARNING MCH and prevent continuously
- * being interrupted.  One caveat is however, that we must do this per
- * processor and cannot use the smp version of ctl_clear_bit().
- * On VM we only get one interrupt per virtally presented machinecheck.
- * Though one suffices, we may get one interrupt per (virtual) processor.
- */
+	/*
+	 * A warning may remain for a prolonged period on the bare iron.
+	 * (actually until the machine is powered off, or the problem is gone)
+	 * So we just stop listening for the WARNING MCH and avoid continuously
+	 * being interrupted.  One caveat is however, that we must do this per
+	 * processor and cannot use the smp version of ctl_clear_bit().
+	 * On VM we only get one interrupt per virtally presented machinecheck.
+	 * Though one suffices, we may get one interrupt per (virtual) cpu.
+	 */
 	if (mcck.warning) {	/* WARNING pending ? */
 		static int mchchk_wng_posted = 0;
-		/*
-		 * Use single machine clear, as we cannot handle smp right now
-		 */
+
+		/* Use single cpu clear, as we cannot handle smp here. */
 		__ctl_clear_bit(14, 24);	/* Disable WARNING MCH */
 		if (xchg(&mchchk_wng_posted, 1) == 0)
 			kill_cad_pid(SIGPWR, 1);
 	}
-#endif
-
 	if (mcck.kill_task) {
 		local_irq_enable();
 		printk(KERN_EMERG "mcck: Terminating task because of machine "
@@ -375,9 +370,7 @@ static int __init machine_check_init(void)
 {
 	ctl_set_bit(14, 25);	/* enable external damage MCH */
 	ctl_set_bit(14, 27);	/* enable system recovery MCH */
-#ifdef CONFIG_MACHCHK_WARNING
 	ctl_set_bit(14, 24);	/* enable warning MCH */
-#endif
 	return 0;
 }
 arch_initcall(machine_check_init);
-- 
cgit v1.2.3


From e3dd9c2da674993edb5b52acb56a5d954415639b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:03 +0100
Subject: [S390] convert bitmap definitions to C

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/bitops.h |  2 +-
 arch/s390/kernel/bitmap.S      | 56 ------------------------------------------
 arch/s390/kernel/bitmap.c      | 49 ++++++++++++++++++++++++++++++++++++
 3 files changed, 50 insertions(+), 57 deletions(-)
 delete mode 100644 arch/s390/kernel/bitmap.S
 create mode 100644 arch/s390/kernel/bitmap.c

(limited to 'arch')

diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index 8e9243ae0c1..334964a0fb1 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -57,7 +57,7 @@
  * with operation of the form "set_bit(bitnr, flags)".
  */
 
-/* bitmap tables from arch/S390/kernel/bitmap.S */
+/* bitmap tables from arch/s390/kernel/bitmap.c */
 extern const char _oi_bitmap[];
 extern const char _ni_bitmap[];
 extern const char _zb_findmap[];
diff --git a/arch/s390/kernel/bitmap.S b/arch/s390/kernel/bitmap.S
deleted file mode 100644
index dfb41f946e2..00000000000
--- a/arch/s390/kernel/bitmap.S
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  arch/s390/kernel/bitmap.S
- *    Bitmaps for set_bit, clear_bit, test_and_set_bit, ...
- *    See include/asm-s390/{bitops.h|posix_types.h} for details
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- */
-
-         .globl _oi_bitmap
-_oi_bitmap:
-         .byte  0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80
-
-         .globl _ni_bitmap
-_ni_bitmap:
-         .byte  0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,0xBF,0x7F
-
-         .globl _zb_findmap
-_zb_findmap:
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4 
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,7
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4
-         .byte  0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,8
-
-         .globl _sb_findmap
-_sb_findmap:
-         .byte  8,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  7,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-         .byte  4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0
-
diff --git a/arch/s390/kernel/bitmap.c b/arch/s390/kernel/bitmap.c
new file mode 100644
index 00000000000..54e362b4267
--- /dev/null
+++ b/arch/s390/kernel/bitmap.c
@@ -0,0 +1,49 @@
+/*
+ *    Bitmaps for set_bit, clear_bit, test_and_set_bit, ...
+ *    See include/asm/{bitops.h|posix_types.h} for details
+ *
+ *    Copyright IBM Corp. 1999,2009
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ */
+
+#include <linux/bitops.h>
+
+const char _oi_bitmap[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+
+const char _ni_bitmap[] = { 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f };
+
+const char _zb_findmap[] = {
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,7,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
+	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,8 };
+
+const char _sb_findmap[] = {
+	8,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	7,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
+	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0 };
-- 
cgit v1.2.3


From 1485c5c88483d200c9c4c71ed7e8eef1a1e317a1 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:04 +0100
Subject: [S390] move EXPORT_SYMBOLs to definitions

Move all EXPORT_SYMBOLs to their corresponding definitions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/bitmap.c     |  5 +++++
 arch/s390/kernel/process.c    |  2 ++
 arch/s390/kernel/s390_ksyms.c | 44 -------------------------------------------
 arch/s390/kernel/setup.c      |  8 ++++++++
 arch/s390/lib/delay.c         |  2 ++
 arch/s390/mm/init.c           |  2 ++
 6 files changed, 19 insertions(+), 44 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/bitmap.c b/arch/s390/kernel/bitmap.c
index 54e362b4267..3ae4757b006 100644
--- a/arch/s390/kernel/bitmap.c
+++ b/arch/s390/kernel/bitmap.c
@@ -7,10 +7,13 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/module.h>
 
 const char _oi_bitmap[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+EXPORT_SYMBOL(_oi_bitmap);
 
 const char _ni_bitmap[] = { 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f };
+EXPORT_SYMBOL(_ni_bitmap);
 
 const char _zb_findmap[] = {
 	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
@@ -29,6 +32,7 @@ const char _zb_findmap[] = {
 	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
 	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
 	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,8 };
+EXPORT_SYMBOL(_zb_findmap);
 
 const char _sb_findmap[] = {
 	8,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
@@ -47,3 +51,4 @@ const char _sb_findmap[] = {
 	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
 	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
 	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0 };
+EXPORT_SYMBOL(_sb_findmap);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index bd616fb31e7..b48e961a38f 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -141,6 +141,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED,
 		       0, &regs, 0, NULL, NULL);
 }
+EXPORT_SYMBOL(kernel_thread);
 
 /*
  * Free current thread data structures etc..
@@ -318,6 +319,7 @@ int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs)
 #endif /* CONFIG_64BIT */
 	return 1;
 }
+EXPORT_SYMBOL(dump_fpu);
 
 unsigned long get_wchan(struct task_struct *p)
 {
diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c
index 46b90cb0370..656fcbb9bd8 100644
--- a/arch/s390/kernel/s390_ksyms.c
+++ b/arch/s390/kernel/s390_ksyms.c
@@ -1,49 +1,5 @@
-/*
- *  arch/s390/kernel/s390_ksyms.c
- *
- *  S390 version
- */
-#include <linux/highuid.h>
 #include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/interrupt.h>
-#include <asm/checksum.h>
-#include <asm/cpcmd.h>
-#include <asm/delay.h>
-#include <asm/pgalloc.h>
-#include <asm/setup.h>
 #include <asm/ftrace.h>
-#ifdef CONFIG_IP_MULTICAST
-#include <net/arp.h>
-#endif
-
-/*
- * memory management
- */
-EXPORT_SYMBOL(_oi_bitmap);
-EXPORT_SYMBOL(_ni_bitmap);
-EXPORT_SYMBOL(_zb_findmap);
-EXPORT_SYMBOL(_sb_findmap);
-
-/*
- * binfmt_elf loader 
- */
-extern int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs);
-EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(empty_zero_page);
-
-/*
- * misc.
- */
-EXPORT_SYMBOL(machine_flags);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(csum_fold);
-EXPORT_SYMBOL(console_mode);
-EXPORT_SYMBOL(console_devno);
-EXPORT_SYMBOL(console_irq);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(_mcount);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 8fdf08379ce..0b8ad7b4f8f 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -74,9 +74,17 @@ EXPORT_SYMBOL(uaccess);
  * Machine setup..
  */
 unsigned int console_mode = 0;
+EXPORT_SYMBOL(console_mode);
+
 unsigned int console_devno = -1;
+EXPORT_SYMBOL(console_devno);
+
 unsigned int console_irq = -1;
+EXPORT_SYMBOL(console_irq);
+
 unsigned long machine_flags;
+EXPORT_SYMBOL(machine_flags);
+
 unsigned long elf_hwcap = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 6ccb9fab055..3f5f680726e 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -9,6 +9,7 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/timex.h>
+#include <linux/module.h>
 #include <linux/irqflags.h>
 #include <linux/interrupt.h>
 
@@ -92,6 +93,7 @@ out:
 	local_irq_restore(flags);
 	preempt_enable();
 }
+EXPORT_SYMBOL(__udelay);
 
 /*
  * Simple udelay variant. To be used on startup and reboot
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index f0258ca3b17..c634dfbe92e 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -40,7 +40,9 @@
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
+
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
+EXPORT_SYMBOL(empty_zero_page);
 
 /*
  * paging_init() sets up the page tables
-- 
cgit v1.2.3


From 8283cb43ab3e92a039d3486a0f6253df95a5fa55 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:21 +0100
Subject: [S390] clock sync mode flags

The clock sync mode flag CLOCK_SYNC_STP is not cleared when stp
is set offline. In this case the get_sync_clock() function returns
-EACCESS and the dasd driver will block all i/o until stp is enabled
again. In addition get_sync_clock can return -EACCESS if the clock is
not in sync instead of -EAGAIN.

Rework the stp/etr online handling to fix these problems.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/time.c | 71 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 44 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fc468cae446..f72d41068dc 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -331,6 +331,7 @@ static unsigned long long adjust_time(unsigned long long old,
 }
 
 static DEFINE_PER_CPU(atomic_t, clock_sync_word);
+static DEFINE_MUTEX(clock_sync_mutex);
 static unsigned long clock_sync_flags;
 
 #define CLOCK_SYNC_HAS_ETR	0
@@ -394,6 +395,20 @@ static void enable_sync_clock(void)
 	atomic_set_mask(0x80000000, sw_ptr);
 }
 
+/*
+ * Function to check if the clock is in sync.
+ */
+static inline int check_sync_clock(void)
+{
+	atomic_t *sw_ptr;
+	int rc;
+
+	sw_ptr = &get_cpu_var(clock_sync_word);
+	rc = (atomic_read(sw_ptr) & 0x80000000U) != 0;
+	put_cpu_var(clock_sync_sync);
+	return rc;
+}
+
 /* Single threaded workqueue used for etr and stp sync events */
 static struct workqueue_struct *time_sync_wq;
 
@@ -485,6 +500,8 @@ static void etr_reset(void)
 	if (etr_setr(&etr_eacr) == 0) {
 		etr_tolec = get_clock();
 		set_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags);
+		if (etr_port0_online && etr_port1_online)
+			set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 	} else if (etr_port0_online || etr_port1_online) {
 		pr_warning("The real or virtual hardware system does "
 			   "not provide an ETR interface\n");
@@ -533,8 +550,7 @@ void etr_switch_to_local(void)
 {
 	if (!etr_eacr.sl)
 		return;
-	if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
-		disable_sync_clock(NULL);
+	disable_sync_clock(NULL);
 	set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
 	queue_work(time_sync_wq, &etr_work);
 }
@@ -549,8 +565,7 @@ void etr_sync_check(void)
 {
 	if (!etr_eacr.es)
 		return;
-	if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
-		disable_sync_clock(NULL);
+	disable_sync_clock(NULL);
 	set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
 	queue_work(time_sync_wq, &etr_work);
 }
@@ -914,7 +929,7 @@ static struct etr_eacr etr_handle_update(struct etr_aib *aib,
 	 * Do not try to get the alternate port aib if the clock
 	 * is not in sync yet.
 	 */
-	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags) && !eacr.es)
+	if (!check_sync_clock())
 		return eacr;
 
 	/*
@@ -997,7 +1012,6 @@ static void etr_work_fn(struct work_struct *work)
 		on_each_cpu(disable_sync_clock, NULL, 1);
 		del_timer_sync(&etr_timer);
 		etr_update_eacr(eacr);
-		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 		goto out_unlock;
 	}
 
@@ -1071,18 +1085,13 @@ static void etr_work_fn(struct work_struct *work)
 		/* Both ports not usable. */
 		eacr.es = eacr.sl = 0;
 		sync_port = -1;
-		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 	}
 
-	if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
-		eacr.es = 0;
-
 	/*
 	 * If the clock is in sync just update the eacr and return.
 	 * If there is no valid sync port wait for a port update.
 	 */
-	if (test_bit(CLOCK_SYNC_STP, &clock_sync_flags) ||
-	    eacr.es || sync_port < 0) {
+	if (check_sync_clock() || sync_port < 0) {
 		etr_update_eacr(eacr);
 		etr_set_tolec_timeout(now);
 		goto out_unlock;
@@ -1103,13 +1112,11 @@ static void etr_work_fn(struct work_struct *work)
 	 * and set up a timer to try again after 0.5 seconds
 	 */
 	etr_update_eacr(eacr);
-	set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 	if (now < etr_tolec + (1600000 << 12) ||
 	    etr_sync_clock_stop(&aib, sync_port) != 0) {
 		/* Sync failed. Try again in 1/2 second. */
 		eacr.es = 0;
 		etr_update_eacr(eacr);
-		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 		etr_set_sync_timeout();
 	} else
 		etr_set_tolec_timeout(now);
@@ -1191,19 +1198,30 @@ static ssize_t etr_online_store(struct sys_device *dev,
 		return -EINVAL;
 	if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags))
 		return -EOPNOTSUPP;
+	mutex_lock(&clock_sync_mutex);
 	if (dev == &etr_port0_dev) {
 		if (etr_port0_online == value)
-			return count;	/* Nothing to do. */
+			goto out;	/* Nothing to do. */
 		etr_port0_online = value;
+		if (etr_port0_online && etr_port1_online)
+			set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
+		else
+			clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 		set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
 		queue_work(time_sync_wq, &etr_work);
 	} else {
 		if (etr_port1_online == value)
-			return count;	/* Nothing to do. */
+			goto out;	/* Nothing to do. */
 		etr_port1_online = value;
+		if (etr_port0_online && etr_port1_online)
+			set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
+		else
+			clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 		set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
 		queue_work(time_sync_wq, &etr_work);
 	}
+out:
+	mutex_unlock(&clock_sync_mutex);
 	return count;
 }
 
@@ -1471,8 +1489,6 @@ static void stp_timing_alert(struct stp_irq_parm *intparm)
  */
 void stp_sync_check(void)
 {
-	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
-		return;
 	disable_sync_clock(NULL);
 	queue_work(time_sync_wq, &stp_work);
 }
@@ -1485,8 +1501,6 @@ void stp_sync_check(void)
  */
 void stp_island_check(void)
 {
-	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
-		return;
 	disable_sync_clock(NULL);
 	queue_work(time_sync_wq, &stp_work);
 }
@@ -1513,10 +1527,6 @@ static int stp_sync_clock(void *data)
 
 	enable_sync_clock();
 
-	set_bit(CLOCK_SYNC_STP, &clock_sync_flags);
-	if (test_and_clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
-		queue_work(time_sync_wq, &etr_work);
-
 	rc = 0;
 	if (stp_info.todoff[0] || stp_info.todoff[1] ||
 	    stp_info.todoff[2] || stp_info.todoff[3] ||
@@ -1535,9 +1545,6 @@ static int stp_sync_clock(void *data)
 	if (rc) {
 		disable_sync_clock(NULL);
 		stp_sync->in_sync = -EAGAIN;
-		clear_bit(CLOCK_SYNC_STP, &clock_sync_flags);
-		if (etr_port0_online || etr_port1_online)
-			queue_work(time_sync_wq, &etr_work);
 	} else
 		stp_sync->in_sync = 1;
 	xchg(&first, 0);
@@ -1569,6 +1576,10 @@ static void stp_work_fn(struct work_struct *work)
 	if (rc || stp_info.c == 0)
 		goto out_unlock;
 
+	/* Skip synchronization if the clock is already in sync. */
+	if (check_sync_clock())
+		goto out_unlock;
+
 	memset(&stp_sync, 0, sizeof(stp_sync));
 	get_online_cpus();
 	atomic_set(&stp_sync.cpus, num_online_cpus() - 1);
@@ -1684,8 +1695,14 @@ static ssize_t stp_online_store(struct sysdev_class *class,
 		return -EINVAL;
 	if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
 		return -EOPNOTSUPP;
+	mutex_lock(&clock_sync_mutex);
 	stp_online = value;
+	if (stp_online)
+		set_bit(CLOCK_SYNC_STP, &clock_sync_flags);
+	else
+		clear_bit(CLOCK_SYNC_STP, &clock_sync_flags);
 	queue_work(time_sync_wq, &stp_work);
+	mutex_unlock(&clock_sync_mutex);
 	return count;
 }
 
-- 
cgit v1.2.3


From 4b2a8b6043979f1e6cc8aaa4116c95b31ae942ec Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:22 +0100
Subject: [S390] kernel: Disable switch_amode by default

Disable switch_amode by default because pagetable walk on pre z9
hardware has negative performance impact.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/setup.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 0b8ad7b4f8f..dd3c5173627 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -301,11 +301,7 @@ static int __init early_parse_mem(char *p)
 early_param("mem", early_parse_mem);
 
 #ifdef CONFIG_S390_SWITCH_AMODE
-#ifdef CONFIG_PGSTE
-unsigned int switch_amode = 1;
-#else
 unsigned int switch_amode = 0;
-#endif
 EXPORT_SYMBOL_GPL(switch_amode);
 
 static int set_amode_and_uaccess(unsigned long user_amode,
-- 
cgit v1.2.3


From d303b6fd858370c22d5c70c313669e3521a5f758 Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:31 +0100
Subject: [S390] qdio: report SIGA errors directly

Errors from SIGA instructions are stored in the per queue qdio_error
and reported back when the queue handler is called. That opens a race
when multiple error conditions occur simultanously.

Report SIGA errors immediately in the return value of do_QDIO so the
upper layer can react and SIGA errors no longer interfere with other
errors.

Move the SIGA error handling in qeth from the outbound handler to
qeth_flush_buffers.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
---
 arch/s390/include/asm/qdio.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 27fc1746de1..402d6dcf0d2 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -314,6 +314,7 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
 			    int, int, unsigned long);
 
 /* qdio errors reported to the upper-layer program */
+#define QDIO_ERROR_SIGA_TARGET			0x02
 #define QDIO_ERROR_SIGA_ACCESS_EXCEPTION	0x10
 #define QDIO_ERROR_SIGA_BUSY			0x20
 #define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
-- 
cgit v1.2.3


From 6faf250789dfd35146a71402f9be245be82bf01e Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 26 Mar 2009 15:24:33 +0100
Subject: [S390] allow usage of string functions in linux/string.h

In introducing a trivial "strstarts()" function in linux/string.h, we
hit the following error on s390:

In file included from include/linux/bitmap.h:8,
                 from include/linux/cpumask.h:142,
                 from include/linux/smp.h:12,
                 from /home/rusty/devel/kernel/patches/linux-2.6/arch/s390/include/asm/spinlock.h:14,
                 from include/linux/spinlock.h:88,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/stat.h:60,
                 from include/linux/module.h:10,
                 from arch/s390/lib/string.c:13:
include/linux/string.h: In function 'strstarts':
include/linux/string.h:124: error: implicit declaration of function 'strlen'
include/linux/string.h:124: warning: incompatible implicit declaration of built-in function 'strlen'

Because when including asm/string.h from arch/s390/lib/string.c we
don't declare the string ops we are about to define, and
linux/string.h barfs.

The fix is to declare them in this IN_ARCH_STRING_C case, but in
general I wonder if there's a neater fix.

Reported-by: linux-next
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/string.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h
index d074673a6d9..adf079170aa 100644
--- a/arch/s390/include/asm/string.h
+++ b/arch/s390/include/asm/string.h
@@ -135,7 +135,13 @@ static inline size_t strnlen(const char * s, size_t n)
 		: "+a" (end), "+a" (tmp) : "d" (r0)  : "cc");
 	return end - s;
 }
-
+#else /* IN_ARCH_STRING_C */
+void *memchr(const void * s, int c, size_t n);
+void *memscan(void *s, int c, size_t n);
+char *strcat(char *dst, const char *src);
+char *strcpy(char *dst, const char *src);
+size_t strlen(const char *s);
+size_t strnlen(const char * s, size_t n);
 #endif /* !IN_ARCH_STRING_C */
 
 #endif /* __KERNEL__ */
-- 
cgit v1.2.3


From ced2c8bcbc5082bc112d7c7410b3f5380c77e306 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:34 +0100
Subject: [S390] remove duplicate nul-termination of string

strlcpy() does already NUL-terminate the destination string.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index d61eb3334ed..4d221c81c84 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -352,7 +352,6 @@ static void __init setup_boot_command_line(void)
 
 	/* copy arch command line */
 	strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
-	boot_command_line[ARCH_COMMAND_LINE_SIZE - 1] = 0;
 
 	/* append IPL PARM data to the boot command line */
 	if (MACHINE_IS_VM) {
-- 
cgit v1.2.3


From e13ed9b2704487e98d9241282765869fbd9a2dda Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:35 +0100
Subject: [S390] bitops: remove likely annotations

likely/unlikely profiling revealed that none of the branches in bitops
is taken likely or unlikely. So remove the annotations.
In addition the generated code is shorter.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/bitops.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index 334964a0fb1..b30606f6d52 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -525,16 +525,16 @@ static inline unsigned long __ffs_word_loop(const unsigned long *addr,
 static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
 {
 #ifdef __s390x__
-	if (likely((word & 0xffffffff) == 0xffffffff)) {
+	if ((word & 0xffffffff) == 0xffffffff) {
 		word >>= 32;
 		nr += 32;
 	}
 #endif
-	if (likely((word & 0xffff) == 0xffff)) {
+	if ((word & 0xffff) == 0xffff) {
 		word >>= 16;
 		nr += 16;
 	}
-	if (likely((word & 0xff) == 0xff)) {
+	if ((word & 0xff) == 0xff) {
 		word >>= 8;
 		nr += 8;
 	}
@@ -549,16 +549,16 @@ static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
 static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
 {
 #ifdef __s390x__
-	if (likely((word & 0xffffffff) == 0)) {
+	if ((word & 0xffffffff) == 0) {
 		word >>= 32;
 		nr += 32;
 	}
 #endif
-	if (likely((word & 0xffff) == 0)) {
+	if ((word & 0xffff) == 0) {
 		word >>= 16;
 		nr += 16;
 	}
-	if (likely((word & 0xff) == 0)) {
+	if ((word & 0xff) == 0) {
 		word >>= 8;
 		nr += 8;
 	}
-- 
cgit v1.2.3


From 504665a91498f43d220b7d0942281067283a35f7 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:36 +0100
Subject: [S390] module function call optimization

Avoid the detour over the PLT if the branch target of a function call
in a module is in the range of the bras (16-bit) or brasl (32-bit)
instruction. The PLT is still generated but it is unused.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/module.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 59b4e796680..eed4a00cb67 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -310,15 +310,20 @@ apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 			info->plt_initialized = 1;
 		}
 		if (r_type == R_390_PLTOFF16 ||
-		    r_type == R_390_PLTOFF32
-		    || r_type == R_390_PLTOFF64
-			)
+		    r_type == R_390_PLTOFF32 ||
+		    r_type == R_390_PLTOFF64)
 			val = me->arch.plt_offset - me->arch.got_offset +
 				info->plt_offset + rela->r_addend;
-		else
-			val =  (Elf_Addr) me->module_core +
-				me->arch.plt_offset + info->plt_offset + 
-				rela->r_addend - loc;
+		else {
+			if (!((r_type == R_390_PLT16DBL &&
+			       val - loc + 0xffffUL < 0x1ffffeUL) ||
+			      (r_type == R_390_PLT32DBL &&
+			       val - loc + 0xffffffffULL < 0x1fffffffeULL)))
+				val = (Elf_Addr) me->module_core +
+					me->arch.plt_offset +
+					info->plt_offset;
+			val += rela->r_addend - loc;
+		}
 		if (r_type == R_390_PLT16DBL)
 			*(unsigned short *) loc = val >> 1;
 		else if (r_type == R_390_PLTOFF16)
-- 
cgit v1.2.3


From 1edad85b16fdda43c8ab809e2779e8bf64ab8bb2 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:37 +0100
Subject: [S390] use compiler builtin versions of strlen/strcpy/strcat

Use builtin variants if gcc 4 or newer is used to compile the kernel.
Generates better code than the asm variants.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/string.h | 8 ++++++++
 arch/s390/lib/string.c         | 8 ++++++++
 2 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h
index adf079170aa..cd0241db5a4 100644
--- a/arch/s390/include/asm/string.h
+++ b/arch/s390/include/asm/string.h
@@ -100,6 +100,7 @@ static inline char *strcat(char *dst, const char *src)
 
 static inline char *strcpy(char *dst, const char *src)
 {
+#if __GNUC__ < 4
 	register int r0 asm("0") = 0;
 	char *ret = dst;
 
@@ -109,10 +110,14 @@ static inline char *strcpy(char *dst, const char *src)
 		: "+&a" (dst), "+&a" (src) : "d" (r0)
 		: "cc", "memory");
 	return ret;
+#else
+	return __builtin_strcpy(dst, src);
+#endif
 }
 
 static inline size_t strlen(const char *s)
 {
+#if __GNUC__ < 4
 	register unsigned long r0 asm("0") = 0;
 	const char *tmp = s;
 
@@ -121,6 +126,9 @@ static inline size_t strlen(const char *s)
 		"	jo	0b"
 		: "+d" (r0), "+a" (tmp) :  : "cc");
 	return r0 - (unsigned long) s;
+#else
+	return __builtin_strlen(s);
+#endif
 }
 
 static inline size_t strnlen(const char * s, size_t n)
diff --git a/arch/s390/lib/string.c b/arch/s390/lib/string.c
index ae5cf5d03d4..4143b7c1909 100644
--- a/arch/s390/lib/string.c
+++ b/arch/s390/lib/string.c
@@ -44,7 +44,11 @@ static inline char *__strnend(const char *s, size_t n)
  */
 size_t strlen(const char *s)
 {
+#if __GNUC__ < 4
 	return __strend(s) - s;
+#else
+	return __builtin_strlen(s);
+#endif
 }
 EXPORT_SYMBOL(strlen);
 
@@ -70,6 +74,7 @@ EXPORT_SYMBOL(strnlen);
  */
 char *strcpy(char *dest, const char *src)
 {
+#if __GNUC__ < 4
 	register int r0 asm("0") = 0;
 	char *ret = dest;
 
@@ -78,6 +83,9 @@ char *strcpy(char *dest, const char *src)
 		      : "+&a" (dest), "+&a" (src) : "d" (r0)
 		      : "cc", "memory" );
 	return ret;
+#else
+	return __builtin_strcpy(dest, src);
+#endif
 }
 EXPORT_SYMBOL(strcpy);
 
-- 
cgit v1.2.3


From eaf1b6fbca8d9be87bef2eafaa3f40bffe26ce04 Mon Sep 17 00:00:00 2001
From: Dan Smith <danms@us.ibm.com>
Date: Thu, 26 Mar 2009 15:24:40 +0100
Subject: [S390] Expose a constant for the number of words representing the CRs

We need to use this value in the checkpoint/restart code and would like to
have a constant instead of a magic '3'.

Cc: linux-s390@vger.kernel.org
Signed-off-by: Dan Smith <danms@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/ptrace.h   | 4 +++-
 arch/s390/kernel/compat_ptrace.h | 3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 8920025c3c0..f1b051630c5 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -172,6 +172,8 @@
 #define NUM_CRS		16
 #define NUM_ACRS	16
 
+#define NUM_CR_WORDS	3
+
 #define FPR_SIZE	8
 #define FPC_SIZE	4
 #define FPC_PAD_SIZE	4 /* gcc insists on aligning the fpregs */
@@ -334,7 +336,7 @@ struct pt_regs
  */
 typedef struct
 {
-	unsigned long cr[3];
+	unsigned long cr[NUM_CR_WORDS];
 } per_cr_words;
 
 #define PER_EM_MASK 0xE8000000UL
diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h
index a2be3a978d5..123dd660d7f 100644
--- a/arch/s390/kernel/compat_ptrace.h
+++ b/arch/s390/kernel/compat_ptrace.h
@@ -1,10 +1,11 @@
 #ifndef _PTRACE32_H
 #define _PTRACE32_H
 
+#include <asm/ptrace.h>    /* needed for NUM_CR_WORDS */
 #include "compat_linux.h"  /* needed for psw_compat_t */
 
 typedef struct {
-	__u32 cr[3];
+	__u32 cr[NUM_CR_WORDS];
 } per_cr_words32;
 
 typedef struct {
-- 
cgit v1.2.3


From 2938af534d47891ddbced552e5d29f7b90bec609 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:41 +0100
Subject: [S390] Fix comments in lowcore structure

This patch fixes two addresses in the comments for the
lowcore structure. Looks like an copy-paste bug.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index ee4b10ff938..f94386ece0d 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -315,8 +315,8 @@ struct _lowcore
 	__u8         op_access_id;             /* 0x0a2 */
 	__u8         ar_access_id;             /* 0x0a3 */
 	__u8         pad2[0xA8-0xA4];          /* 0x0a4 */
-	addr_t       trans_exc_code;           /* 0x0A0 */
-	addr_t       monitor_code;             /* 0x09c */
+	addr_t	     trans_exc_code;	       /* 0x0a8 */
+	addr_t	     monitor_code;	       /* 0x0b0 */
 	__u16        subchannel_id;            /* 0x0b8 */
 	__u16        subchannel_nr;            /* 0x0ba */
 	__u32        io_int_parm;              /* 0x0bc */
-- 
cgit v1.2.3


From 7b4684880dfc6c45bc56039ca5eada771d7643ab Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:42 +0100
Subject: [S390] eliminate cpuinfo_S390 structure

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h   | 15 +++++----
 arch/s390/include/asm/processor.h | 16 +--------
 arch/s390/include/asm/smp.h       |  7 +---
 arch/s390/kernel/processor.c      | 69 +++++++++++++++++++--------------------
 arch/s390/kernel/setup.c          | 10 ++----
 arch/s390/kernel/smp.c            |  8 ++---
 6 files changed, 51 insertions(+), 74 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index f94386ece0d..ad543c11826 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -80,7 +80,6 @@
 #define __LC_USER_ASCE			0xC50
 #define __LC_PANIC_STACK                0xC54
 #define __LC_CPUID                      0xC60
-#define __LC_CPUADDR                    0xC68
 #define __LC_IPLDEV                     0xC7C
 #define __LC_CURRENT			0xC90
 #define __LC_INT_CLOCK			0xC98
@@ -102,7 +101,6 @@
 #define __LC_USER_ASCE			0xD60
 #define __LC_PANIC_STACK                0xD68
 #define __LC_CPUID			0xD80
-#define __LC_CPUADDR			0xD88
 #define __LC_IPLDEV                     0xDB8
 #define __LC_CURRENT			0xDD8
 #define __LC_INT_CLOCK			0xDE8
@@ -273,8 +271,10 @@ struct _lowcore
 	__u32	     user_exec_asce;	       /* 0xc58 */
 	__u8	     pad10[0xc60-0xc5c];       /* 0xc5c */
 	/* entry.S sensitive area start */
-	struct       cpuinfo_S390 cpu_data;    /* 0xc60 */
-	__u32        ipl_device;               /* 0xc7c */
+	cpuid_t      cpu_id;		       /* 0xc60 */
+	__u32	     cpu_nr;		       /* 0xc68 */
+	__u32	     ipl_device;	       /* 0xc6c */
+	__u8	     pad_0xc70[0xc80-0xc70];   /* 0xc70 */
 	/* entry.S sensitive area end */
 
         /* SMP info area: defined by DJB */
@@ -366,9 +366,10 @@ struct _lowcore
 	__u64	     user_exec_asce;	       /* 0xd70 */
 	__u8	     pad10[0xd80-0xd78];       /* 0xd78 */
 	/* entry.S sensitive area start */
-	struct       cpuinfo_S390 cpu_data;    /* 0xd80 */
-	__u32        ipl_device;               /* 0xdb8 */
-	__u32        pad11;                    /* 0xdbc */
+	cpuid_t      cpu_id;		       /* 0xd80 */
+	__u32	     cpu_nr;		       /* 0xd88 */
+	__u32	     ipl_device;	       /* 0xd8c */
+	__u8	     pad_0xd90[0xdc0-0xd90];   /* 0xd90 */
 	/* entry.S sensitive area end */
 
         /* SMP info area: defined by DJB */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index db4523fe38a..61862b3ac79 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -42,22 +42,8 @@ static inline void get_cpu_id(cpuid_t *ptr)
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
 }
 
-struct cpuinfo_S390
-{
-        cpuid_t  cpu_id;
-        __u16    cpu_addr;
-        __u16    cpu_nr;
-        unsigned long loops_per_jiffy;
-        unsigned long *pgd_quick;
-#ifdef __s390x__
-        unsigned long *pmd_quick;
-#endif /* __s390x__ */
-        unsigned long *pte_quick;
-        unsigned long pgtable_cache_sz;
-};
-
 extern void s390_adjust_jiffies(void);
-extern void print_cpu_info(struct cpuinfo_S390 *);
+extern void print_cpu_info(void);
 extern int get_cpu_capability(unsigned int *);
 
 /*
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 024b91e0623..2009158a450 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -50,12 +50,7 @@ extern void machine_power_off_smp(void);
  
 #define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
 
-#define raw_smp_processor_id()	(S390_lowcore.cpu_data.cpu_nr)
-
-static inline __u16 hard_smp_processor_id(void)
-{
-	return stap();
-}
+#define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
 
 /*
  * returns 1 if cpu is in stopped/check stopped state or not operational
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 82c1872cfe8..423da1bd42a 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -18,10 +18,11 @@
 #include <asm/lowcore.h>
 #include <asm/param.h>
 
-void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo)
+void __cpuinit print_cpu_info(void)
 {
 	pr_info("Processor %d started, address %d, identification %06X\n",
-		cpuinfo->cpu_nr, cpuinfo->cpu_addr, cpuinfo->cpu_id.ident);
+		S390_lowcore.cpu_nr, S390_lowcore.cpu_addr,
+		S390_lowcore.cpu_id.ident);
 }
 
 /*
@@ -34,44 +35,42 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
 		"edat"
 	};
-       struct cpuinfo_S390 *cpuinfo;
-       unsigned long n = (unsigned long) v - 1;
-       int i;
+	struct _lowcore *lc;
+	unsigned long n = (unsigned long) v - 1;
+	int i;
 
-       s390_adjust_jiffies();
-       preempt_disable();
-       if (!n) {
-	       seq_printf(m, "vendor_id       : IBM/S390\n"
-			  "# processors    : %i\n"
-			  "bogomips per cpu: %lu.%02lu\n",
-			  num_online_cpus(), loops_per_jiffy/(500000/HZ),
-			  (loops_per_jiffy/(5000/HZ))%100);
-	       seq_puts(m, "features\t: ");
-	       for (i = 0; i < 8; i++)
-		       if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
-			       seq_printf(m, "%s ", hwcap_str[i]);
-	       seq_puts(m, "\n");
-       }
+	s390_adjust_jiffies();
+	preempt_disable();
+	if (!n) {
+		seq_printf(m, "vendor_id       : IBM/S390\n"
+			   "# processors    : %i\n"
+			   "bogomips per cpu: %lu.%02lu\n",
+			   num_online_cpus(), loops_per_jiffy/(500000/HZ),
+			   (loops_per_jiffy/(5000/HZ))%100);
+		seq_puts(m, "features\t: ");
+		for (i = 0; i < 8; i++)
+			if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
+				seq_printf(m, "%s ", hwcap_str[i]);
+		seq_puts(m, "\n");
+	}
 
-       if (cpu_online(n)) {
+	if (cpu_online(n)) {
 #ifdef CONFIG_SMP
-	       if (smp_processor_id() == n)
-		       cpuinfo = &S390_lowcore.cpu_data;
-	       else
-		       cpuinfo = &lowcore_ptr[n]->cpu_data;
+		lc = (smp_processor_id() == n) ?
+			&S390_lowcore : lowcore_ptr[n];
 #else
-	       cpuinfo = &S390_lowcore.cpu_data;
+		lc = &S390_lowcore;
 #endif
-	       seq_printf(m, "processor %li: "
-			  "version = %02X,  "
-			  "identification = %06X,  "
-			  "machine = %04X\n",
-			  n, cpuinfo->cpu_id.version,
-			  cpuinfo->cpu_id.ident,
-			  cpuinfo->cpu_id.machine);
-       }
-       preempt_enable();
-       return 0;
+		seq_printf(m, "processor %li: "
+			   "version = %02X,  "
+			   "identification = %06X,  "
+			   "machine = %04X\n",
+			   n, lc->cpu_id.version,
+			   lc->cpu_id.ident,
+			   lc->cpu_id.machine);
+	}
+	preempt_enable();
+	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index dd3c5173627..9c8853f21bb 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -121,13 +121,10 @@ static struct resource data_resource = {
  */
 void __cpuinit cpu_init(void)
 {
-        int addr = hard_smp_processor_id();
-
         /*
          * Store processor id in lowcore (used e.g. in timer_interrupt)
          */
-	get_cpu_id(&S390_lowcore.cpu_data.cpu_id);
-        S390_lowcore.cpu_data.cpu_addr = addr;
+	get_cpu_id(&S390_lowcore.cpu_id);
 
         /*
          * Force FPU initialization:
@@ -686,7 +683,6 @@ setup_memory(void)
 static void __init setup_hwcaps(void)
 {
 	static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 };
-	struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data;
 	unsigned long long facility_list_extended;
 	unsigned int facility_list;
 	int i;
@@ -732,7 +728,7 @@ static void __init setup_hwcaps(void)
 	if (MACHINE_HAS_HPAGE)
 		elf_hwcap |= 1UL << 7;
 
-	switch (cpuinfo->cpu_id.machine) {
+	switch (S390_lowcore.cpu_id.machine) {
 	case 0x9672:
 #if !defined(CONFIG_64BIT)
 	default:	/* Use "g5" as default for 31 bit kernels. */
@@ -825,7 +821,7 @@ setup_arch(char **cmdline_p)
 	setup_lowcore();
 
         cpu_init();
-        __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
+	__cpu_logical_map[0] = stap();
 	s390_init_cpu_topology();
 
 	/*
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index a8858634dd0..b167f74d94c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -372,7 +372,7 @@ static void __init smp_detect_cpus(void)
 
 	c_cpus = 1;
 	s_cpus = 0;
-	boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr;
+	boot_cpu_addr = __cpu_logical_map[0];
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
 		panic("smp_detect_cpus failed to allocate memory\n");
@@ -446,7 +446,7 @@ int __cpuinit start_secondary(void *cpuvoid)
 	/* Switch on interrupts */
 	local_irq_enable();
 	/* Print info about this processor */
-	print_cpu_info(&S390_lowcore.cpu_data);
+	print_cpu_info();
 	/* cpu_idle will call schedule for us */
 	cpu_idle();
 	return 0;
@@ -564,7 +564,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 		: : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
 	cpu_lowcore->percpu_offset = __per_cpu_offset[cpu];
 	cpu_lowcore->current_task = (unsigned long) idle;
-	cpu_lowcore->cpu_data.cpu_nr = cpu;
+	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
 	cpu_lowcore->ipl_device = S390_lowcore.ipl_device;
 	eieio();
@@ -656,7 +656,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	/* request the 0x1201 emergency signal external interrupt */
 	if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
 		panic("Couldn't request external interrupt 0x1201");
-	print_cpu_info(&S390_lowcore.cpu_data);
+	print_cpu_info();
 
 	/* Reallocate current lowcore, but keep its contents. */
 	lc_order = sizeof(long) == 8 ? 1 : 0;
-- 
cgit v1.2.3


From da292bbe1f620221b08c4b589424f370168d642b Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:43 +0100
Subject: [S390] eliminate ipl_device from lowcore

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h | 8 ++------
 arch/s390/kernel/head31.S       | 1 -
 arch/s390/kernel/head64.S       | 1 -
 arch/s390/kernel/setup.c        | 1 -
 arch/s390/kernel/smp.c          | 1 -
 5 files changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index ad543c11826..5b18035c1dc 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -80,7 +80,6 @@
 #define __LC_USER_ASCE			0xC50
 #define __LC_PANIC_STACK                0xC54
 #define __LC_CPUID                      0xC60
-#define __LC_IPLDEV                     0xC7C
 #define __LC_CURRENT			0xC90
 #define __LC_INT_CLOCK			0xC98
 #else /* __s390x__ */
@@ -101,7 +100,6 @@
 #define __LC_USER_ASCE			0xD60
 #define __LC_PANIC_STACK                0xD68
 #define __LC_CPUID			0xD80
-#define __LC_IPLDEV                     0xDB8
 #define __LC_CURRENT			0xDD8
 #define __LC_INT_CLOCK			0xDE8
 #define __LC_VDSO_PER_CPU		0xE38
@@ -273,8 +271,7 @@ struct _lowcore
 	/* entry.S sensitive area start */
 	cpuid_t      cpu_id;		       /* 0xc60 */
 	__u32	     cpu_nr;		       /* 0xc68 */
-	__u32	     ipl_device;	       /* 0xc6c */
-	__u8	     pad_0xc70[0xc80-0xc70];   /* 0xc70 */
+	__u8	     pad_0xc6c[0xc80-0xc6c];   /* 0xc6c */
 	/* entry.S sensitive area end */
 
         /* SMP info area: defined by DJB */
@@ -368,8 +365,7 @@ struct _lowcore
 	/* entry.S sensitive area start */
 	cpuid_t      cpu_id;		       /* 0xd80 */
 	__u32	     cpu_nr;		       /* 0xd88 */
-	__u32	     ipl_device;	       /* 0xd8c */
-	__u8	     pad_0xd90[0xdc0-0xd90];   /* 0xd90 */
+	__u8	     pad_0xd8c[0xdc0-0xd8c];   /* 0xd8c */
 	/* entry.S sensitive area end */
 
         /* SMP info area: defined by DJB */
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index db476d114ca..2ced846065b 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -20,7 +20,6 @@ startup_continue:
 	lctl	%c0,%c15,.Lctl-.LPG1(%r13) # load control registers
 	l	%r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
 					# move IPL device to lowcore
-	mvc	__LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
 #
 # Setup stack
 #
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index f9f70aa1524..65667b2e65c 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -86,7 +86,6 @@ startup_continue:
 	lctlg	%c0,%c15,.Lctl-.LPG1(%r13)	# load control registers
 	lg	%r12,.Lparmaddr-.LPG1(%r13)	# pointer to parameter area
 					# move IPL device to lowcore
-	mvc	__LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
 	lghi	%r0,__LC_PASTE
 	stg	%r0,__LC_VDSO_PER_CPU
 #
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9c8853f21bb..91551ef1d67 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -419,7 +419,6 @@ setup_lowcore(void)
 		PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
 	lc->io_new_psw.mask = psw_kernel_bits;
 	lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
-	lc->ipl_device = S390_lowcore.ipl_device;
 	lc->clock_comparator = -1ULL;
 	lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
 	lc->async_stack = (unsigned long)
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b167f74d94c..775885772ff 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -566,7 +566,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	cpu_lowcore->current_task = (unsigned long) idle;
 	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
-	cpu_lowcore->ipl_device = S390_lowcore.ipl_device;
 	eieio();
 
 	while (signal_processor(cpu, sigp_restart) == sigp_busy)
-- 
cgit v1.2.3


From 866ba28418d30122d863c50182a202741f4dcf3e Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:44 +0100
Subject: [S390] cleanup lowcore.h

The lowcore.h header has quite a lot of whitespace damage and a rather
wild collection of entries. Remove all that whitespace and tidy up the
order of the lowcore fields.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h | 652 ++++++++++++++++++++--------------------
 arch/s390/kernel/head.S         |   2 +
 2 files changed, 331 insertions(+), 323 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 5b18035c1dc..b349f1c7fdf 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -11,125 +11,118 @@
 #ifndef _ASM_S390_LOWCORE_H
 #define _ASM_S390_LOWCORE_H
 
-#ifndef __s390x__
-#define __LC_EXT_OLD_PSW                0x018
-#define __LC_SVC_OLD_PSW                0x020
-#define __LC_PGM_OLD_PSW                0x028
-#define __LC_MCK_OLD_PSW                0x030
-#define __LC_IO_OLD_PSW                 0x038
-#define __LC_EXT_NEW_PSW                0x058
-#define __LC_SVC_NEW_PSW                0x060
-#define __LC_PGM_NEW_PSW                0x068
-#define __LC_MCK_NEW_PSW                0x070
-#define __LC_IO_NEW_PSW                 0x078
-#else /* !__s390x__ */
-#define __LC_EXT_OLD_PSW                0x0130
-#define __LC_SVC_OLD_PSW                0x0140
-#define __LC_PGM_OLD_PSW                0x0150
-#define __LC_MCK_OLD_PSW                0x0160
-#define __LC_IO_OLD_PSW                 0x0170
-#define __LC_EXT_NEW_PSW                0x01b0
-#define __LC_SVC_NEW_PSW                0x01c0
-#define __LC_PGM_NEW_PSW                0x01d0
-#define __LC_MCK_NEW_PSW                0x01e0
-#define __LC_IO_NEW_PSW                 0x01f0
-#endif /* !__s390x__ */
-
-#define __LC_IPL_PARMBLOCK_PTR		0x014
-#define __LC_EXT_PARAMS                 0x080
-#define __LC_CPU_ADDRESS                0x084
-#define __LC_EXT_INT_CODE               0x086
-
-#define __LC_SVC_ILC                    0x088
-#define __LC_SVC_INT_CODE               0x08A
-#define __LC_PGM_ILC                    0x08C
-#define __LC_PGM_INT_CODE               0x08E
+#define __LC_IPL_PARMBLOCK_PTR		0x0014
+#define __LC_EXT_PARAMS			0x0080
+#define __LC_CPU_ADDRESS		0x0084
+#define __LC_EXT_INT_CODE		0x0086
 
-#define __LC_PER_ATMID			0x096
-#define __LC_PER_ADDRESS		0x098
-#define __LC_PER_ACCESS_ID		0x0A1
-#define __LC_AR_MODE_ID			0x0A3
+#define __LC_SVC_ILC			0x0088
+#define __LC_SVC_INT_CODE		0x008a
+#define __LC_PGM_ILC			0x008c
+#define __LC_PGM_INT_CODE		0x008e
 
-#define __LC_SUBCHANNEL_ID              0x0B8
-#define __LC_SUBCHANNEL_NR              0x0BA
-#define __LC_IO_INT_PARM                0x0BC
-#define __LC_IO_INT_WORD                0x0C0
-#define __LC_MCCK_CODE                  0x0E8
+#define __LC_PER_ATMID			0x0096
+#define __LC_PER_ADDRESS		0x0098
+#define __LC_PER_ACCESS_ID		0x00a1
+#define __LC_AR_MODE_ID			0x00a3
 
-#define __LC_LAST_BREAK 		0x110
+#define __LC_SUBCHANNEL_ID		0x00b8
+#define __LC_SUBCHANNEL_NR		0x00ba
+#define __LC_IO_INT_PARM		0x00bc
+#define __LC_IO_INT_WORD		0x00c0
+#define __LC_MCCK_CODE			0x00e8
 
-#define __LC_RETURN_PSW                 0x200
-
-#define __LC_SAVE_AREA                  0xC00
+#define __LC_DUMP_REIPL			0x0e00
 
 #ifndef __s390x__
-#define __LC_IRB			0x208
-#define __LC_SYNC_ENTER_TIMER		0x248
-#define __LC_ASYNC_ENTER_TIMER		0x250
-#define __LC_EXIT_TIMER			0x258
-#define __LC_USER_TIMER			0x260
-#define __LC_SYSTEM_TIMER		0x268
-#define __LC_STEAL_TIMER		0x270
-#define __LC_LAST_UPDATE_TIMER		0x278
-#define __LC_LAST_UPDATE_CLOCK		0x280
-#define __LC_RETURN_MCCK_PSW            0x288
-#define __LC_KERNEL_STACK               0xC40
-#define __LC_THREAD_INFO		0xC44
-#define __LC_ASYNC_STACK                0xC48
-#define __LC_KERNEL_ASCE		0xC4C
-#define __LC_USER_ASCE			0xC50
-#define __LC_PANIC_STACK                0xC54
-#define __LC_CPUID                      0xC60
-#define __LC_CURRENT			0xC90
-#define __LC_INT_CLOCK			0xC98
+#define __LC_EXT_OLD_PSW		0x0018
+#define __LC_SVC_OLD_PSW		0x0020
+#define __LC_PGM_OLD_PSW		0x0028
+#define __LC_MCK_OLD_PSW		0x0030
+#define __LC_IO_OLD_PSW			0x0038
+#define __LC_EXT_NEW_PSW		0x0058
+#define __LC_SVC_NEW_PSW		0x0060
+#define __LC_PGM_NEW_PSW		0x0068
+#define __LC_MCK_NEW_PSW		0x0070
+#define __LC_IO_NEW_PSW			0x0078
+#define __LC_SAVE_AREA			0x0200
+#define __LC_RETURN_PSW			0x0240
+#define __LC_RETURN_MCCK_PSW		0x0248
+#define __LC_SYNC_ENTER_TIMER		0x0250
+#define __LC_ASYNC_ENTER_TIMER		0x0258
+#define __LC_EXIT_TIMER			0x0260
+#define __LC_USER_TIMER			0x0268
+#define __LC_SYSTEM_TIMER		0x0270
+#define __LC_STEAL_TIMER		0x0278
+#define __LC_LAST_UPDATE_TIMER		0x0280
+#define __LC_LAST_UPDATE_CLOCK		0x0288
+#define __LC_CURRENT			0x0290
+#define __LC_THREAD_INFO		0x0294
+#define __LC_KERNEL_STACK		0x0298
+#define __LC_ASYNC_STACK		0x029c
+#define __LC_PANIC_STACK		0x02a0
+#define __LC_KERNEL_ASCE		0x02a4
+#define __LC_USER_ASCE			0x02a8
+#define __LC_USER_EXEC_ASCE		0x02ac
+#define __LC_CPUID			0x02b0
+#define __LC_INT_CLOCK			0x02c8
+#define __LC_IRB			0x0300
+#define __LC_PFAULT_INTPARM		0x0080
+#define __LC_CPU_TIMER_SAVE_AREA	0x00d8
+#define __LC_CLOCK_COMP_SAVE_AREA	0x00e0
+#define __LC_PSW_SAVE_AREA		0x0100
+#define __LC_PREFIX_SAVE_AREA		0x0108
+#define __LC_AREGS_SAVE_AREA		0x0120
+#define __LC_FPREGS_SAVE_AREA		0x0160
+#define __LC_GPREGS_SAVE_AREA		0x0180
+#define __LC_CREGS_SAVE_AREA		0x01c0
 #else /* __s390x__ */
-#define __LC_IRB			0x210
-#define __LC_SYNC_ENTER_TIMER		0x250
-#define __LC_ASYNC_ENTER_TIMER		0x258
-#define __LC_EXIT_TIMER			0x260
-#define __LC_USER_TIMER			0x268
-#define __LC_SYSTEM_TIMER		0x270
-#define __LC_STEAL_TIMER		0x278
-#define __LC_LAST_UPDATE_TIMER		0x280
-#define __LC_LAST_UPDATE_CLOCK		0x288
-#define __LC_RETURN_MCCK_PSW            0x290
-#define __LC_KERNEL_STACK               0xD40
-#define __LC_THREAD_INFO		0xD48
-#define __LC_ASYNC_STACK                0xD50
-#define __LC_KERNEL_ASCE		0xD58
-#define __LC_USER_ASCE			0xD60
-#define __LC_PANIC_STACK                0xD68
-#define __LC_CPUID			0xD80
-#define __LC_CURRENT			0xDD8
-#define __LC_INT_CLOCK			0xDE8
-#define __LC_VDSO_PER_CPU		0xE38
-#endif /* __s390x__ */
-
-#define __LC_PASTE			0xE40
-
-#define __LC_DUMP_REIPL			0xE00
-#ifndef __s390x__
-#define __LC_PFAULT_INTPARM             0x080
-#define __LC_CPU_TIMER_SAVE_AREA        0x0D8
-#define __LC_CLOCK_COMP_SAVE_AREA	0x0E0
-#define __LC_PSW_SAVE_AREA		0x100
-#define __LC_PREFIX_SAVE_AREA		0x108
-#define __LC_AREGS_SAVE_AREA            0x120
-#define __LC_FPREGS_SAVE_AREA		0x160
-#define __LC_GPREGS_SAVE_AREA           0x180
-#define __LC_CREGS_SAVE_AREA            0x1C0
-#else /* __s390x__ */
-#define __LC_PFAULT_INTPARM             0x11B8
+#define __LC_LAST_BREAK			0x0110
+#define __LC_EXT_OLD_PSW		0x0130
+#define __LC_SVC_OLD_PSW		0x0140
+#define __LC_PGM_OLD_PSW		0x0150
+#define __LC_MCK_OLD_PSW		0x0160
+#define __LC_IO_OLD_PSW			0x0170
+#define __LC_EXT_NEW_PSW		0x01b0
+#define __LC_SVC_NEW_PSW		0x01c0
+#define __LC_PGM_NEW_PSW		0x01d0
+#define __LC_MCK_NEW_PSW		0x01e0
+#define __LC_IO_NEW_PSW			0x01f0
+#define __LC_SAVE_AREA			0x0200
+#define __LC_RETURN_PSW			0x0280
+#define __LC_RETURN_MCCK_PSW		0x0290
+#define __LC_SYNC_ENTER_TIMER		0x02a0
+#define __LC_ASYNC_ENTER_TIMER		0x02a8
+#define __LC_EXIT_TIMER			0x02b0
+#define __LC_USER_TIMER			0x02b8
+#define __LC_SYSTEM_TIMER		0x02c0
+#define __LC_STEAL_TIMER		0x02c8
+#define __LC_LAST_UPDATE_TIMER		0x02d0
+#define __LC_LAST_UPDATE_CLOCK		0x02d8
+#define __LC_CURRENT			0x02e0
+#define __LC_THREAD_INFO		0x02e8
+#define __LC_KERNEL_STACK		0x02f0
+#define __LC_ASYNC_STACK		0x02f8
+#define __LC_PANIC_STACK		0x0300
+#define __LC_KERNEL_ASCE		0x0308
+#define __LC_USER_ASCE			0x0310
+#define __LC_USER_EXEC_ASCE		0x0318
+#define __LC_CPUID			0x0320
+#define __LC_INT_CLOCK			0x0340
+#define __LC_VDSO_PER_CPU		0x0350
+#define __LC_IRB			0x0380
+#define __LC_PASTE			0x03c0
+#define __LC_PFAULT_INTPARM		0x11b8
 #define __LC_FPREGS_SAVE_AREA		0x1200
-#define __LC_GPREGS_SAVE_AREA           0x1280
+#define __LC_GPREGS_SAVE_AREA		0x1280
 #define __LC_PSW_SAVE_AREA		0x1300
 #define __LC_PREFIX_SAVE_AREA		0x1318
-#define __LC_FP_CREG_SAVE_AREA		0x131C
+#define __LC_FP_CREG_SAVE_AREA		0x131c
 #define __LC_TODREG_SAVE_AREA		0x1324
-#define __LC_CPU_TIMER_SAVE_AREA        0x1328
+#define __LC_CPU_TIMER_SAVE_AREA	0x1328
 #define __LC_CLOCK_COMP_SAVE_AREA	0x1331
-#define __LC_AREGS_SAVE_AREA            0x1340
-#define __LC_CREGS_SAVE_AREA            0x1380
+#define __LC_AREGS_SAVE_AREA		0x1340
+#define __LC_CREGS_SAVE_AREA		0x1380
 #endif /* __s390x__ */
 
 #ifndef __ASSEMBLY__
@@ -194,227 +187,240 @@ union save_area {
 struct _lowcore
 {
 #ifndef __s390x__
-        /* prefix area: defined by architecture */
-	psw_t        restart_psw;              /* 0x000 */
-	__u32        ccw2[4];                  /* 0x008 */
-	psw_t        external_old_psw;         /* 0x018 */
-	psw_t        svc_old_psw;              /* 0x020 */
-	psw_t        program_old_psw;          /* 0x028 */
-	psw_t        mcck_old_psw;             /* 0x030 */
-	psw_t        io_old_psw;               /* 0x038 */
-	__u8         pad1[0x58-0x40];          /* 0x040 */
-	psw_t        external_new_psw;         /* 0x058 */
-	psw_t        svc_new_psw;              /* 0x060 */
-	psw_t        program_new_psw;          /* 0x068 */
-	psw_t        mcck_new_psw;             /* 0x070 */
-	psw_t        io_new_psw;               /* 0x078 */
-	__u32        ext_params;               /* 0x080 */
-	__u16        cpu_addr;                 /* 0x084 */
-	__u16        ext_int_code;             /* 0x086 */
-        __u16        svc_ilc;                  /* 0x088 */
-        __u16        svc_code;                 /* 0x08a */
-        __u16        pgm_ilc;                  /* 0x08c */
-        __u16        pgm_code;                 /* 0x08e */
-	__u32        trans_exc_code;           /* 0x090 */
-	__u16        mon_class_num;            /* 0x094 */
-	__u16        per_perc_atmid;           /* 0x096 */
-	__u32        per_address;              /* 0x098 */
-	__u32        monitor_code;             /* 0x09c */
-	__u8         exc_access_id;            /* 0x0a0 */
-	__u8         per_access_id;            /* 0x0a1 */
-	__u8         pad2[0xB8-0xA2];          /* 0x0a2 */
-	__u16        subchannel_id;            /* 0x0b8 */
-	__u16        subchannel_nr;            /* 0x0ba */
-	__u32        io_int_parm;              /* 0x0bc */
-	__u32        io_int_word;              /* 0x0c0 */
-	__u8	     pad3[0xc8-0xc4];	       /* 0x0c4 */
-	__u32	     stfl_fac_list;	       /* 0x0c8 */
-	__u8	     pad4[0xd4-0xcc];	       /* 0x0cc */
-	__u32        extended_save_area_addr;  /* 0x0d4 */
-	__u32        cpu_timer_save_area[2];   /* 0x0d8 */
-	__u32        clock_comp_save_area[2];  /* 0x0e0 */
-	__u32        mcck_interruption_code[2]; /* 0x0e8 */
-	__u8	     pad5[0xf4-0xf0];	       /* 0x0f0 */
-	__u32        external_damage_code;     /* 0x0f4 */
-	__u32        failing_storage_address;  /* 0x0f8 */
-	__u8	     pad6[0x100-0xfc];	       /* 0x0fc */
-	__u32        st_status_fixed_logout[4];/* 0x100 */
-	__u8	     pad7[0x120-0x110];        /* 0x110 */
-	__u32        access_regs_save_area[16];/* 0x120 */
-	__u32        floating_pt_save_area[8]; /* 0x160 */
-	__u32        gpregs_save_area[16];     /* 0x180 */
-	__u32        cregs_save_area[16];      /* 0x1c0 */	
-
-        psw_t        return_psw;               /* 0x200 */
-	__u8	     irb[64];		       /* 0x208 */
-	__u64        sync_enter_timer;         /* 0x248 */
-	__u64        async_enter_timer;        /* 0x250 */
-	__u64        exit_timer;               /* 0x258 */
-	__u64	     user_timer;	       /* 0x260 */
-	__u64	     system_timer;	       /* 0x268 */
-	__u64	     steal_timer;	       /* 0x270 */
-	__u64	     last_update_timer;        /* 0x278 */
-	__u64	     last_update_clock;        /* 0x280 */
-        psw_t        return_mcck_psw;          /* 0x288 */
-	__u8         pad8[0xc00-0x290];        /* 0x290 */
-
-        /* System info area */
-	__u32        save_area[16];            /* 0xc00 */
-	__u32        kernel_stack;             /* 0xc40 */
-	__u32        thread_info;              /* 0xc44 */
-	__u32        async_stack;              /* 0xc48 */
-	__u32        kernel_asce;              /* 0xc4c */
-	__u32        user_asce;                /* 0xc50 */
-	__u32        panic_stack;              /* 0xc54 */
-	__u32	     user_exec_asce;	       /* 0xc58 */
-	__u8	     pad10[0xc60-0xc5c];       /* 0xc5c */
-	/* entry.S sensitive area start */
-	cpuid_t      cpu_id;		       /* 0xc60 */
-	__u32	     cpu_nr;		       /* 0xc68 */
-	__u8	     pad_0xc6c[0xc80-0xc6c];   /* 0xc6c */
-	/* entry.S sensitive area end */
-
-        /* SMP info area: defined by DJB */
-	__u64	     clock_comparator;	       /* 0xc80 */
-	__u32        ext_call_fast;            /* 0xc88 */
-	__u32        percpu_offset;            /* 0xc8c */
-	__u32        current_task;	       /* 0xc90 */
-	__u32        softirq_pending;	       /* 0xc94 */
-	__u64        int_clock;                /* 0xc98 */
-        __u8         pad11[0xe00-0xca0];       /* 0xca0 */
-
-	/* 0xe00 contains the address of the IPL Parameter */
-	/* Information block. Dump tools need IPIB for IPL */
-	/* after dump.					   */
-	__u32	     ipib;		       /* 0xe00 */
-	__u32	     ipib_checksum;	       /* 0xe04 */
-
-        /* Align to the top 1k of prefix area */
-	__u8	     pad12[0x1000-0xe08];      /* 0xe08 */
+	/* 0x0000 - 0x01ff: defined by architecture */
+	psw_t	restart_psw;			/* 0x0000 */
+	__u32	ccw2[4];			/* 0x0008 */
+	psw_t	external_old_psw;		/* 0x0018 */
+	psw_t	svc_old_psw;			/* 0x0020 */
+	psw_t	program_old_psw;		/* 0x0028 */
+	psw_t	mcck_old_psw;			/* 0x0030 */
+	psw_t	io_old_psw;			/* 0x0038 */
+	__u8	pad_0x0040[0x0058-0x0040];	/* 0x0040 */
+	psw_t	external_new_psw;		/* 0x0058 */
+	psw_t	svc_new_psw;			/* 0x0060 */
+	psw_t	program_new_psw;		/* 0x0068 */
+	psw_t	mcck_new_psw;			/* 0x0070 */
+	psw_t	io_new_psw;			/* 0x0078 */
+	__u32	ext_params;			/* 0x0080 */
+	__u16	cpu_addr;			/* 0x0084 */
+	__u16	ext_int_code;			/* 0x0086 */
+	__u16	svc_ilc;			/* 0x0088 */
+	__u16	svc_code;			/* 0x008a */
+	__u16	pgm_ilc;			/* 0x008c */
+	__u16	pgm_code;			/* 0x008e */
+	__u32	trans_exc_code;			/* 0x0090 */
+	__u16	mon_class_num;			/* 0x0094 */
+	__u16	per_perc_atmid;			/* 0x0096 */
+	__u32	per_address;			/* 0x0098 */
+	__u32	monitor_code;			/* 0x009c */
+	__u8	exc_access_id;			/* 0x00a0 */
+	__u8	per_access_id;			/* 0x00a1 */
+	__u8	pad_0x00a2[0x00b8-0x00a2];	/* 0x00a2 */
+	__u16	subchannel_id;			/* 0x00b8 */
+	__u16	subchannel_nr;			/* 0x00ba */
+	__u32	io_int_parm;			/* 0x00bc */
+	__u32	io_int_word;			/* 0x00c0 */
+	__u8	pad_0x00c4[0x00c8-0x00c4];	/* 0x00c4 */
+	__u32	stfl_fac_list;			/* 0x00c8 */
+	__u8	pad_0x00cc[0x00d4-0x00cc];	/* 0x00cc */
+	__u32	extended_save_area_addr;	/* 0x00d4 */
+	__u32	cpu_timer_save_area[2];		/* 0x00d8 */
+	__u32	clock_comp_save_area[2];	/* 0x00e0 */
+	__u32	mcck_interruption_code[2];	/* 0x00e8 */
+	__u8	pad_0x00f0[0x00f4-0x00f0];	/* 0x00f0 */
+	__u32	external_damage_code;		/* 0x00f4 */
+	__u32	failing_storage_address;	/* 0x00f8 */
+	__u8	pad_0x00fc[0x0100-0x00fc];	/* 0x00fc */
+	__u32	st_status_fixed_logout[4];	/* 0x0100 */
+	__u8	pad_0x0110[0x0120-0x0110];	/* 0x0110 */
+
+	/* CPU register save area: defined by architecture */
+	__u32	access_regs_save_area[16];	/* 0x0120 */
+	__u32	floating_pt_save_area[8];	/* 0x0160 */
+	__u32	gpregs_save_area[16];		/* 0x0180 */
+	__u32	cregs_save_area[16];		/* 0x01c0 */
+
+	/* Return psws. */
+	__u32	save_area[16];			/* 0x0200 */
+	psw_t	return_psw;			/* 0x0240 */
+	psw_t	return_mcck_psw;		/* 0x0248 */
+
+	/* CPU time accounting values */
+	__u64	sync_enter_timer;		/* 0x0250 */
+	__u64	async_enter_timer;		/* 0x0258 */
+	__u64	exit_timer;			/* 0x0260 */
+	__u64	user_timer;			/* 0x0268 */
+	__u64	system_timer;			/* 0x0270 */
+	__u64	steal_timer;			/* 0x0278 */
+	__u64	last_update_timer;		/* 0x0280 */
+	__u64	last_update_clock;		/* 0x0288 */
+
+	/* Current process. */
+	__u32	current_task;			/* 0x0290 */
+	__u32	thread_info;			/* 0x0294 */
+	__u32	kernel_stack;			/* 0x0298 */
+
+	/* Interrupt and panic stack. */
+	__u32	async_stack;			/* 0x029c */
+	__u32	panic_stack;			/* 0x02a0 */
+
+	/* Address space pointer. */
+	__u32	kernel_asce;			/* 0x02a4 */
+	__u32	user_asce;			/* 0x02a8 */
+	__u32	user_exec_asce;			/* 0x02ac */
+
+	/* SMP info area */
+	cpuid_t	cpu_id;				/* 0x02b0 */
+	__u32	cpu_nr;				/* 0x02b8 */
+	__u32	softirq_pending;		/* 0x02bc */
+	__u32	percpu_offset;			/* 0x02c0 */
+	__u32	ext_call_fast;			/* 0x02c4 */
+	__u64	int_clock;			/* 0x02c8 */
+	__u64	clock_comparator;		/* 0x02d0 */
+	__u8	pad_0x02d8[0x0300-0x02d8];	/* 0x02d8 */
+
+	/* Interrupt response block */
+	__u8	irb[64];			/* 0x0300 */
+
+	__u8	pad_0x0400[0x0e00-0x0400];	/* 0x0400 */
+
+	/*
+	 * 0xe00 contains the address of the IPL Parameter Information
+	 * block. Dump tools need IPIB for IPL after dump.
+	 * Note: do not change the position of any fields in 0x0e00-0x0f00
+	 */
+	__u32	ipib;				/* 0x0e00 */
+	__u32	ipib_checksum;			/* 0x0e04 */
+
+	/* Align to the top 1k of prefix area */
+	__u8	pad_0x0e08[0x1000-0x0e08];	/* 0x0e08 */
 #else /* !__s390x__ */
-        /* prefix area: defined by architecture */
-	__u32        ccw1[2];                  /* 0x000 */
-	__u32        ccw2[4];                  /* 0x008 */
-	__u8         pad1[0x80-0x18];          /* 0x018 */
-	__u32        ext_params;               /* 0x080 */
-	__u16        cpu_addr;                 /* 0x084 */
-	__u16        ext_int_code;             /* 0x086 */
-        __u16        svc_ilc;                  /* 0x088 */
-        __u16        svc_code;                 /* 0x08a */
-        __u16        pgm_ilc;                  /* 0x08c */
-        __u16        pgm_code;                 /* 0x08e */
-	__u32        data_exc_code;            /* 0x090 */
-	__u16        mon_class_num;            /* 0x094 */
-	__u16        per_perc_atmid;           /* 0x096 */
-	addr_t       per_address;              /* 0x098 */
-	__u8         exc_access_id;            /* 0x0a0 */
-	__u8         per_access_id;            /* 0x0a1 */
-	__u8         op_access_id;             /* 0x0a2 */
-	__u8         ar_access_id;             /* 0x0a3 */
-	__u8         pad2[0xA8-0xA4];          /* 0x0a4 */
-	addr_t	     trans_exc_code;	       /* 0x0a8 */
-	addr_t	     monitor_code;	       /* 0x0b0 */
-	__u16        subchannel_id;            /* 0x0b8 */
-	__u16        subchannel_nr;            /* 0x0ba */
-	__u32        io_int_parm;              /* 0x0bc */
-	__u32        io_int_word;              /* 0x0c0 */
-	__u8         pad3[0xc8-0xc4];          /* 0x0c4 */
-	__u32        stfl_fac_list;            /* 0x0c8 */
-	__u8         pad4[0xe8-0xcc];          /* 0x0cc */
-	__u32        mcck_interruption_code[2]; /* 0x0e8 */
-	__u8         pad5[0xf4-0xf0];          /* 0x0f0 */
-	__u32        external_damage_code;     /* 0x0f4 */
-	addr_t       failing_storage_address;  /* 0x0f8 */
-	__u8         pad6[0x120-0x100];        /* 0x100 */
-	psw_t        restart_old_psw;          /* 0x120 */
-	psw_t        external_old_psw;         /* 0x130 */
-	psw_t        svc_old_psw;              /* 0x140 */
-	psw_t        program_old_psw;          /* 0x150 */
-	psw_t        mcck_old_psw;             /* 0x160 */
-	psw_t        io_old_psw;               /* 0x170 */
-	__u8         pad7[0x1a0-0x180];        /* 0x180 */
-	psw_t        restart_psw;              /* 0x1a0 */
-	psw_t        external_new_psw;         /* 0x1b0 */
-	psw_t        svc_new_psw;              /* 0x1c0 */
-	psw_t        program_new_psw;          /* 0x1d0 */
-	psw_t        mcck_new_psw;             /* 0x1e0 */
-	psw_t        io_new_psw;               /* 0x1f0 */
-        psw_t        return_psw;               /* 0x200 */
-	__u8	     irb[64];		       /* 0x210 */
-	__u64        sync_enter_timer;         /* 0x250 */
-	__u64        async_enter_timer;        /* 0x258 */
-	__u64        exit_timer;               /* 0x260 */
-	__u64	     user_timer;	       /* 0x268 */
-	__u64	     system_timer;	       /* 0x270 */
-	__u64	     steal_timer;	       /* 0x278 */
-	__u64	     last_update_timer;        /* 0x280 */
-	__u64	     last_update_clock;        /* 0x288 */
-        psw_t        return_mcck_psw;          /* 0x290 */
-        __u8         pad8[0xc00-0x2a0];        /* 0x2a0 */
-        /* System info area */
-	__u64        save_area[16];            /* 0xc00 */
-        __u8         pad9[0xd40-0xc80];        /* 0xc80 */
- 	__u64        kernel_stack;             /* 0xd40 */
-	__u64        thread_info;              /* 0xd48 */
-	__u64        async_stack;              /* 0xd50 */
-	__u64        kernel_asce;              /* 0xd58 */
-	__u64        user_asce;                /* 0xd60 */
-	__u64        panic_stack;              /* 0xd68 */
-	__u64	     user_exec_asce;	       /* 0xd70 */
-	__u8	     pad10[0xd80-0xd78];       /* 0xd78 */
-	/* entry.S sensitive area start */
-	cpuid_t      cpu_id;		       /* 0xd80 */
-	__u32	     cpu_nr;		       /* 0xd88 */
-	__u8	     pad_0xd8c[0xdc0-0xd8c];   /* 0xd8c */
-	/* entry.S sensitive area end */
-
-        /* SMP info area: defined by DJB */
-	__u64	     clock_comparator;	       /* 0xdc0 */
-	__u64        ext_call_fast;            /* 0xdc8 */
-	__u64        percpu_offset;            /* 0xdd0 */
-	__u64        current_task;	       /* 0xdd8 */
-	__u32	     softirq_pending;	       /* 0xde0 */
-	__u32	     pad_0x0de4;	       /* 0xde4 */
-	__u64        int_clock;                /* 0xde8 */
-        __u8         pad12[0xe00-0xdf0];       /* 0xdf0 */
-
-	/* 0xe00 contains the address of the IPL Parameter */
-	/* Information block. Dump tools need IPIB for IPL */
-	/* after dump.					   */
-	__u64	     ipib;		       /* 0xe00 */
-	__u32	     ipib_checksum;	       /* 0xe08 */
+	/* 0x0000 - 0x01ff: defined by architecture */
+	__u32	ccw1[2];			/* 0x0000 */
+	__u32	ccw2[4];			/* 0x0008 */
+	__u8	pad_0x0018[0x0080-0x0018];	/* 0x0018 */
+	__u32	ext_params;			/* 0x0080 */
+	__u16	cpu_addr;			/* 0x0084 */
+	__u16	ext_int_code;			/* 0x0086 */
+	__u16	svc_ilc;			/* 0x0088 */
+	__u16	svc_code;			/* 0x008a */
+	__u16	pgm_ilc;			/* 0x008c */
+	__u16	pgm_code;			/* 0x008e */
+	__u32	data_exc_code;			/* 0x0090 */
+	__u16	mon_class_num;			/* 0x0094 */
+	__u16	per_perc_atmid;			/* 0x0096 */
+	addr_t	per_address;			/* 0x0098 */
+	__u8	exc_access_id;			/* 0x00a0 */
+	__u8	per_access_id;			/* 0x00a1 */
+	__u8	op_access_id;			/* 0x00a2 */
+	__u8	ar_access_id;			/* 0x00a3 */
+	__u8	pad_0x00a4[0x00a8-0x00a4];	/* 0x00a4 */
+	addr_t	trans_exc_code;			/* 0x00a8 */
+	addr_t	monitor_code;			/* 0x00b0 */
+	__u16	subchannel_id;			/* 0x00b8 */
+	__u16	subchannel_nr;			/* 0x00ba */
+	__u32	io_int_parm;			/* 0x00bc */
+	__u32	io_int_word;			/* 0x00c0 */
+	__u8	pad_0x00c4[0x00c8-0x00c4];	/* 0x00c4 */
+	__u32	stfl_fac_list;			/* 0x00c8 */
+	__u8	pad_0x00cc[0x00e8-0x00cc];	/* 0x00cc */
+	__u32	mcck_interruption_code[2];	/* 0x00e8 */
+	__u8	pad_0x00f0[0x00f4-0x00f0];	/* 0x00f0 */
+	__u32	external_damage_code;		/* 0x00f4 */
+	addr_t	failing_storage_address;	/* 0x00f8 */
+	__u8	pad_0x0100[0x0120-0x0100];	/* 0x0100 */
+	psw_t	restart_old_psw;		/* 0x0120 */
+	psw_t	external_old_psw;		/* 0x0130 */
+	psw_t	svc_old_psw;			/* 0x0140 */
+	psw_t	program_old_psw;		/* 0x0150 */
+	psw_t	mcck_old_psw;			/* 0x0160 */
+	psw_t	io_old_psw;			/* 0x0170 */
+	__u8	pad_0x0180[0x01a0-0x0180];	/* 0x0180 */
+	psw_t	restart_psw;			/* 0x01a0 */
+	psw_t	external_new_psw;		/* 0x01b0 */
+	psw_t	svc_new_psw;			/* 0x01c0 */
+	psw_t	program_new_psw;		/* 0x01d0 */
+	psw_t	mcck_new_psw;			/* 0x01e0 */
+	psw_t	io_new_psw;			/* 0x01f0 */
+
+	/* Entry/exit save area & return psws. */
+	__u64	save_area[16];			/* 0x0200 */
+	psw_t	return_psw;			/* 0x0280 */
+	psw_t	return_mcck_psw;		/* 0x0290 */
+
+	/* CPU accounting and timing values. */
+	__u64	sync_enter_timer;		/* 0x02a0 */
+	__u64	async_enter_timer;		/* 0x02a8 */
+	__u64	exit_timer;			/* 0x02b0 */
+	__u64	user_timer;			/* 0x02b8 */
+	__u64	system_timer;			/* 0x02c0 */
+	__u64	steal_timer;			/* 0x02c8 */
+	__u64	last_update_timer;		/* 0x02d0 */
+	__u64	last_update_clock;		/* 0x02d8 */
+
+	/* Current process. */
+	__u64	current_task;			/* 0x02e0 */
+	__u64	thread_info;			/* 0x02e8 */
+	__u64	kernel_stack;			/* 0x02f0 */
+
+	/* Interrupt and panic stack. */
+	__u64	async_stack;			/* 0x02f8 */
+	__u64	panic_stack;			/* 0x0300 */
+
+	/* Address space pointer. */
+	__u64	kernel_asce;			/* 0x0308 */
+	__u64	user_asce;			/* 0x0310 */
+	__u64	user_exec_asce;			/* 0x0318 */
+
+	/* SMP info area */
+	cpuid_t	cpu_id;				/* 0x0320 */
+	__u32	cpu_nr;				/* 0x0328 */
+	__u32	softirq_pending;		/* 0x032c */
+	__u64	percpu_offset;			/* 0x0330 */
+	__u64	ext_call_fast;			/* 0x0338 */
+	__u64	int_clock;			/* 0x0340 */
+	__u64	clock_comparator;		/* 0x0348 */
+	__u64	vdso_per_cpu_data;		/* 0x0350 */
+	__u8	pad_0x0358[0x0380-0x0358];	/* 0x0358 */
+
+	/* Interrupt response block. */
+	__u8	irb[64];			/* 0x0380 */
 
 	/* Per cpu primary space access list */
-	__u8	     pad_0xe0c[0xe38-0xe0c];   /* 0xe0c */
-	__u64	     vdso_per_cpu_data;	       /* 0xe38 */
-	__u32	     paste[16];		       /* 0xe40 */
-
-	__u8	     pad13[0x11b8-0xe80];      /* 0xe80 */
-
-	/* 64 bit extparam used for pfault, diag 250 etc  */
-	__u64        ext_params2;               /* 0x11B8 */
-
-	__u8         pad14[0x1200-0x11C0];      /* 0x11C0 */
-
-        /* System info area */ 
-
-	__u64        floating_pt_save_area[16]; /* 0x1200 */
-	__u64        gpregs_save_area[16];      /* 0x1280 */
-	__u32        st_status_fixed_logout[4]; /* 0x1300 */
-	__u8         pad15[0x1318-0x1310];      /* 0x1310 */
-	__u32        prefixreg_save_area;       /* 0x1318 */
-	__u32        fpt_creg_save_area;        /* 0x131c */
-	__u8         pad16[0x1324-0x1320];      /* 0x1320 */
-	__u32        tod_progreg_save_area;     /* 0x1324 */
-	__u32        cpu_timer_save_area[2];    /* 0x1328 */
-	__u32        clock_comp_save_area[2];   /* 0x1330 */
-	__u8         pad17[0x1340-0x1338];      /* 0x1338 */
-	__u32        access_regs_save_area[16]; /* 0x1340 */ 
-	__u64        cregs_save_area[16];       /* 0x1380 */
+	__u32	paste[16];			/* 0x03c0 */
+
+	__u8	pad_0x0400[0x0e00-0x0400];	/* 0x0400 */
+
+	/*
+	 * 0xe00 contains the address of the IPL Parameter Information
+	 * block. Dump tools need IPIB for IPL after dump.
+	 * Note: do not change the position of any fields in 0x0e00-0x0f00
+	 */
+	__u64	ipib;				/* 0x0e00 */
+	__u32	ipib_checksum;			/* 0x0e08 */
+	__u8	pad_0x0e0c[0x11b8-0x0e0c];	/* 0x0e0c */
+
+	/* 64 bit extparam used for pfault/diag 250: defined by architecture */
+	__u64	ext_params2;			/* 0x11B8 */
+	__u8	pad_0x11c0[0x1200-0x11C0];	/* 0x11C0 */
+
+	/* CPU register save area: defined by architecture */
+	__u64	floating_pt_save_area[16];	/* 0x1200 */
+	__u64	gpregs_save_area[16];		/* 0x1280 */
+	__u32	st_status_fixed_logout[4];	/* 0x1300 */
+	__u8	pad_0x1310[0x1318-0x1310];	/* 0x1310 */
+	__u32	prefixreg_save_area;		/* 0x1318 */
+	__u32	fpt_creg_save_area;		/* 0x131c */
+	__u8	pad_0x1320[0x1324-0x1320];	/* 0x1320 */
+	__u32	tod_progreg_save_area;		/* 0x1324 */
+	__u32	cpu_timer_save_area[2];		/* 0x1328 */
+	__u32	clock_comp_save_area[2];	/* 0x1330 */
+	__u8	pad_0x1338[0x1340-0x1338];	/* 0x1338 */
+	__u32	access_regs_save_area[16];	/* 0x1340 */
+	__u64	cregs_save_area[16];		/* 0x1380 */
 
 	/* align to the top of the prefix area */
-
-	__u8         pad18[0x2000-0x1400];      /* 0x1400 */
+	__u8	pad_0x1400[0x2000-0x1400];	/* 0x1400 */
 #endif /* !__s390x__ */
 } __attribute__((packed)); /* End structure*/
 
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index ec7e35f6055..1046c2c9f8d 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -469,6 +469,8 @@ start:
 	.org	0x10000
 startup:basr	%r13,0			# get base
 .LPG0:
+	xc	0x200(256),0x200	# partially clear lowcore
+	xc	0x300(256),0x300
 
 #ifndef CONFIG_MARCH_G5
 	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
-- 
cgit v1.2.3


From 159d1ff8f6c38086ed75f8e892790d0a4f3a6b71 Mon Sep 17 00:00:00 2001
From: Frank Munzert <munzert@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:45 +0100
Subject: [S390] Use csum_partial in checksum.h

The cksm function in system.h is duplicate to csum_partial in checksum.h.
Remove cksm and use csum_partial instead.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/system.h | 16 ----------------
 arch/s390/kernel/ipl.c         |  4 +++-
 2 files changed, 3 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 3f2ccb82b86..3a8b26eb1f2 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -458,22 +458,6 @@ static inline unsigned short stap(void)
 	return cpu_address;
 }
 
-static inline u32 cksm(void *addr, unsigned long len)
-{
-	register unsigned long _addr asm("0") = (unsigned long) addr;
-	register unsigned long _len asm("1") = len;
-	unsigned long accu = 0;
-
-	asm volatile(
-		"0:\n"
-		"	cksm	%0,%1\n"
-		"	jnz	0b\n"
-		: "+d" (accu), "+d" (_addr), "+d" (_len)
-		:
-		: "cc", "memory");
-	return accu;
-}
-
 extern void (*_machine_restart)(char *command);
 extern void (*_machine_halt)(void);
 extern void (*_machine_power_off)(void);
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 5663c1f8e46..505fec06e63 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -24,6 +24,7 @@
 #include <asm/reset.h>
 #include <asm/sclp.h>
 #include <asm/setup.h>
+#include <asm/checksum.h>
 
 #define IPL_PARM_BLOCK_VERSION 0
 
@@ -1359,7 +1360,8 @@ static void dump_reipl_run(struct shutdown_trigger *trigger)
 		"a" (&lowcore_ptr[smp_processor_id()]->ipib));
 #endif
 	asm volatile("stura %0,%1"
-		:: "a" (cksm(reipl_block_actual, reipl_block_actual->hdr.len)),
+		:: "a" (csum_partial(reipl_block_actual,
+				     reipl_block_actual->hdr.len, 0)),
 		"a" (&lowcore_ptr[smp_processor_id()]->ipib_checksum));
 	preempt_enable();
 	dump_run(trigger);
-- 
cgit v1.2.3


From 59f2e69d0f95bc00353628ef33fd534fbb8e3597 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:46 +0100
Subject: [S390] zfcpdump: Prevent zcore from beeing built as a kernel module.

The zcore code switches to real addressing mode when creating a kernel dump.
This is not possible, if it is built as a kernel module. With this patch
zcore (zfcpdump) can't be built as a kernel module any more.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig        | 2 +-
 arch/s390/kernel/setup.c | 4 ++--
 arch/s390/kernel/smp.c   | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 0a9463bea75..2a8af5e1634 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -545,7 +545,7 @@ config KEXEC
 	  but is independent of hardware/microcode support.
 
 config ZFCPDUMP
-	tristate "zfcpdump support"
+	bool "zfcpdump support"
 	select SMP
 	default n
 	help
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 91551ef1d67..46fc981e02b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -226,7 +226,7 @@ static void __init conmode_default(void)
 	}
 }
 
-#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+#ifdef CONFIG_ZFCPDUMP
 static void __init setup_zfcpdump(unsigned int console_devno)
 {
 	static char str[41];
@@ -515,7 +515,7 @@ static void __init setup_memory_end(void)
 	unsigned long max_mem;
 	int i;
 
-#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+#ifdef CONFIG_ZFCPDUMP
 	if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
 		memory_end = ZFCPDUMP_HSA_SIZE;
 		memory_end_set = 1;
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 775885772ff..bb3d34aa7b8 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -226,7 +226,7 @@ EXPORT_SYMBOL(smp_ctl_clear_bit);
  */
 #define CPU_INIT_NO	1
 
-#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+#ifdef CONFIG_ZFCPDUMP
 
 /*
  * zfcpdump_prefix_array holds prefix registers for the following scenario:
@@ -267,7 +267,7 @@ EXPORT_SYMBOL_GPL(zfcpdump_save_areas);
 
 static inline void smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) { }
 
-#endif /* CONFIG_ZFCPDUMP || CONFIG_ZFCPDUMP_MODULE */
+#endif /* CONFIG_ZFCPDUMP */
 
 static int cpu_stopped(int cpu)
 {
-- 
cgit v1.2.3


From 6aa0d3a922c4f58fc36cc1502c6ac72f999e26bb Mon Sep 17 00:00:00 2001
From: Stoyan Gaydarov <stoyboyker@gmail.com>
Date: Thu, 26 Mar 2009 15:24:47 +0100
Subject: [S390] BUG to BUG_ON changes

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/debug.c | 3 +--
 arch/s390/kernel/setup.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index ba03fc0a3a5..39137b9e162 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -698,8 +698,7 @@ debug_info_t *debug_register_mode(const char *name, int pages_per_area,
 	if ((uid != 0) || (gid != 0))
 		pr_warning("Root becomes the owner of all s390dbf files "
 			   "in sysfs\n");
-	if (!initialized)
-		BUG();
+	BUG_ON(!initialized);
 	mutex_lock(&debug_mutex);
 
         /* create new debug_info */
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 46fc981e02b..580abb53ce8 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -134,8 +134,7 @@ void __cpuinit cpu_init(void)
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
-        if (current->mm)
-                BUG();
+	BUG_ON(current->mm);
         enter_lazy_tlb(&init_mm, current);
 }
 
-- 
cgit v1.2.3


From 3e75a902196c45d26d5e28014eb2d9821aa9794f Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@cmpxchg.org>
Date: Thu, 26 Mar 2009 15:24:48 +0100
Subject: [S390] use kzfree()

Use kzfree() instead of memset() + kfree().

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/crypto/prng.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index eca724d229e..b49c00ce65e 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -201,8 +201,7 @@ out_free:
 static void __exit prng_exit(void)
 {
 	/* wipe me */
-	memset(p->buf, 0, prng_chunk_size);
-	kfree(p->buf);
+	kzfree(p->buf);
 	kfree(p);
 
 	misc_deregister(&prng_dev);
-- 
cgit v1.2.3


From a0fa8e3743c80643a06a770b95e73e751548ab17 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:49 +0100
Subject: [S390] s390dbf: Remove redundant initilizations.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/debug.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 39137b9e162..369de12b873 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -603,7 +603,7 @@ debug_input(struct file *file, const char __user *user_buf, size_t length,
 static int
 debug_open(struct inode *inode, struct file *file)
 {
-	int i = 0, rc = 0;
+	int i, rc = 0;
 	file_private_info_t *p_info;
 	debug_info_t *debug_info, *debug_info_snapshot;
 
@@ -1155,7 +1155,6 @@ debug_unregister_view(debug_info_t * id, struct debug_view *view)
 	else {
 		debugfs_remove(id->debugfs_entries[i]);
 		id->views[i] = NULL;
-		rc = 0;
 	}
 	spin_unlock_irqrestore(&id->lock, flags);
 out:
-- 
cgit v1.2.3


From 58ace9f2a8f1caa0303aa64079d3929be28a937a Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:50 +0100
Subject: [S390] s390dbf: Remove needless check for NULL pointer.

The check for NULL pointer has already be done before. Therefore we can remove
the second check.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/debug.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 369de12b873..be8bceaf37d 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -642,8 +642,7 @@ found:
 	p_info = kmalloc(sizeof(file_private_info_t),
 						GFP_KERNEL);
 	if(!p_info){
-		if(debug_info_snapshot)
-			debug_info_free(debug_info_snapshot);
+		debug_info_free(debug_info_snapshot);
 		rc = -ENOMEM;
 		goto out;
 	}
-- 
cgit v1.2.3


From 008d2d112cb8a743a87dfe41a67e11c0a4c73aa4 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:51 +0100
Subject: [S390] ipl: Improve checking logic and remove switch defaults.

A code analysis tool reported two warnings:
"The expression `ipl_info.type == IPL_TYPE_FCP' is true whenever evaluated."
and "Default is not possible". This patch improves the corresponding if
statement logic and removes the unnecessary switch defaults.

Signed-off-by:  Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 505fec06e63..2b901fb8193 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -966,7 +966,6 @@ static void reipl_run(struct shutdown_trigger *trigger)
 		diag308(DIAG308_IPL, NULL);
 		break;
 	case REIPL_METHOD_FCP_DUMP:
-	default:
 		break;
 	}
 	disabled_wait((unsigned long) __builtin_return_address(0));
@@ -1075,10 +1074,12 @@ static int __init reipl_fcp_init(void)
 {
 	int rc;
 
-	if ((!diag308_set_works) && (ipl_info.type != IPL_TYPE_FCP))
-		return 0;
-	if ((!diag308_set_works) && (ipl_info.type == IPL_TYPE_FCP))
-		make_attrs_ro(reipl_fcp_attrs);
+	if (!diag308_set_works) {
+		if (ipl_info.type == IPL_TYPE_FCP)
+			make_attrs_ro(reipl_fcp_attrs);
+		else
+			return 0;
+	}
 
 	reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!reipl_block_fcp)
@@ -1259,7 +1260,6 @@ static void dump_run(struct shutdown_trigger *trigger)
 		diag308(DIAG308_DUMP, NULL);
 		break;
 	case DUMP_METHOD_NONE:
-	default:
 		return;
 	}
 	printk(KERN_EMERG "Dump failed!\n");
@@ -1746,7 +1746,6 @@ void __init setup_ipl(void)
 			sizeof(ipl_info.data.nss.name));
 		break;
 	case IPL_TYPE_UNKNOWN:
-	default:
 		/* We have no info to copy */
 		break;
 	}
-- 
cgit v1.2.3


From 6d54c5a3fb13d32d66a8383cb0b5fb422a563051 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:52 +0100
Subject: [S390] smp: fix memory leak on __cpu_up

If sigp_set_prefix fails on __cpu_up we leak the lowcore structures
and async+panic stacks for the failed cpu.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c  | 6 +++---
 arch/s390/kernel/vdso.c | 2 --
 2 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index bb3d34aa7b8..1f4711b60aa 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -508,7 +508,6 @@ out:
 	return -ENOMEM;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
 static void smp_free_lowcore(int cpu)
 {
 	struct _lowcore *lowcore;
@@ -527,7 +526,6 @@ static void smp_free_lowcore(int cpu)
 	free_pages((unsigned long) lowcore, lc_order);
 	lowcore_ptr[cpu] = NULL;
 }
-#endif /* CONFIG_HOTPLUG_CPU */
 
 /* Upping and downing of CPUs */
 int __cpuinit __cpu_up(unsigned int cpu)
@@ -544,8 +542,10 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 	ccode = signal_processor_p((__u32)(unsigned long)(lowcore_ptr[cpu]),
 				   cpu, sigp_set_prefix);
-	if (ccode)
+	if (ccode) {
+		smp_free_lowcore(cpu);
 		return -EIO;
+	}
 
 	idle = current_set[cpu];
 	cpu_lowcore = lowcore_ptr[cpu];
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 690e1781968..89b2e7f1b7a 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -144,7 +144,6 @@ out:
 	return -ENOMEM;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
 void vdso_free_per_cpu(int cpu, struct _lowcore *lowcore)
 {
 	unsigned long segment_table, page_table, page_frame;
@@ -163,7 +162,6 @@ void vdso_free_per_cpu(int cpu, struct _lowcore *lowcore)
 	free_page(page_table);
 	free_pages(segment_table, SEGMENT_ORDER);
 }
-#endif /* CONFIG_HOTPLUG_CPU */
 
 static void __vdso_init_cr5(void *dummy)
 {
-- 
cgit v1.2.3


From d0d3cdf4c27fa4ce241616da08138954e02890f7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:53 +0100
Subject: [S390] smp: perform initial cpu reset before starting a cpu

Performing an initial cpu reset makes sure all registers and tlbs of
the targeted cpu are initialized and flushed.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 1f4711b60aa..fe5f8dc1e6f 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -534,18 +534,23 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	struct _lowcore *cpu_lowcore;
 	struct stack_frame *sf;
 	sigp_ccode ccode;
+	u32 lowcore;
 
 	if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED)
 		return -EIO;
 	if (smp_alloc_lowcore(cpu))
 		return -ENOMEM;
-
-	ccode = signal_processor_p((__u32)(unsigned long)(lowcore_ptr[cpu]),
-				   cpu, sigp_set_prefix);
-	if (ccode) {
-		smp_free_lowcore(cpu);
-		return -EIO;
-	}
+	do {
+		ccode = signal_processor(cpu, sigp_initial_cpu_reset);
+		if (ccode == sigp_busy)
+			udelay(10);
+		if (ccode == sigp_not_operational)
+			goto err_out;
+	} while (ccode == sigp_busy);
+
+	lowcore = (u32)(unsigned long)lowcore_ptr[cpu];
+	while (signal_processor_p(lowcore, cpu, sigp_set_prefix) == sigp_busy)
+		udelay(10);
 
 	idle = current_set[cpu];
 	cpu_lowcore = lowcore_ptr[cpu];
@@ -574,6 +579,10 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	while (!cpu_online(cpu))
 		cpu_relax();
 	return 0;
+
+err_out:
+	smp_free_lowcore(cpu);
+	return -EIO;
 }
 
 static int __init setup_possible_cpus(char *s)
-- 
cgit v1.2.3


From 2ac3307f275c2a91af0417e16d2cfb95ae478661 Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:54 +0100
Subject: [S390] fix dfp elf hwcap/facility bit detection

The old dfp detection wanted to check bit 43 (dfp high performance), but due
to a wrong calculation always used to check bit 42. Additionally the
"userspace expectation" is, that the dfp capability bit is set is if facility
bit 42 (decimal floating point facility available) and bit 44 (perform floating
point operation facility avail).
The patch fixes the bit calculation and extends the check to work like:
  elf hw cap dfp bit = facility bits 42 (dfp) & 44 (pfpo) available

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/setup.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 580abb53ce8..18222ac4078 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -713,13 +713,15 @@ static void __init setup_hwcaps(void)
 	 * How many facility words are stored depends on the number of
 	 * doublewords passed to the instruction. The additional facilites
 	 * are:
-	 *   Bit 43: decimal floating point facility is installed
+	 *   Bit 42: decimal floating point facility is installed
+	 *   Bit 44: perform floating point operation facility is installed
 	 * translated to:
 	 *   HWCAP_S390_DFP bit 6.
 	 */
 	if ((elf_hwcap & (1UL << 2)) &&
 	    __stfle(&facility_list_extended, 1) > 0) {
-		if (facility_list_extended & (1ULL << (64 - 43)))
+		if ((facility_list_extended & (1ULL << (63 - 42)))
+		   && (facility_list_extended & (1ULL << (63 - 44))))
 			elf_hwcap |= 1UL << 6;
 	}
 
-- 
cgit v1.2.3


From 7e9b580e5f0644cd8952b6671fd5380fd430bca3 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:55 +0100
Subject: [S390] Ensure that ipl panic notifier is called late.

The s390 ipl panic notifier will stop the system or trigger a system dump.
This should be done as final action on the panic path. All other panic
notifiers should be executed before. Currently we use priority 0 for the ipl
notifier. In order to be called late, this patch changes the priority to
INT_MIN which is the lowest possible priority.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 2b901fb8193..56d876904ec 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1722,7 +1722,7 @@ static int on_panic_notify(struct notifier_block *self,
 
 static struct notifier_block on_panic_nb = {
 	.notifier_call = on_panic_notify,
-	.priority = 0,
+	.priority = INT_MIN,
 };
 
 void __init setup_ipl(void)
-- 
cgit v1.2.3


From 488253ce49714f4e9d42413c1d60b7724059a338 Mon Sep 17 00:00:00 2001
From: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Date: Thu, 26 Mar 2009 15:24:56 +0100
Subject: [S390] Add hwcap flag for the etf3 enhancement facility

The Extended Translation Facility 3 (ETF3) added instructions which
allow conversions between different unicode character maps (UTF-8,
UTF-32 ...).  These instructions got enhanced with a later version of
the ETF3 allowing malformed multibyte chars to be recognized and
reported correctly.  The attached patch reserves bit 8 in the elf
hwcaps vector for the enhanced version of ETF3. The bit corresponds to
the stfle bits 22 and 30 and will only be set if both of the stfle
bits are set.

Signed-off-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/processor.c |  6 +++---
 arch/s390/kernel/setup.c     | 13 ++++++++++---
 2 files changed, 13 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 423da1bd42a..802c8ab247f 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -31,9 +31,9 @@ void __cpuinit print_cpu_info(void)
 
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
-	static const char *hwcap_str[8] = {
+	static const char *hwcap_str[9] = {
 		"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
-		"edat"
+		"edat", "etf3eh"
 	};
 	struct _lowcore *lc;
 	unsigned long n = (unsigned long) v - 1;
@@ -48,7 +48,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			   num_online_cpus(), loops_per_jiffy/(500000/HZ),
 			   (loops_per_jiffy/(5000/HZ))%100);
 		seq_puts(m, "features\t: ");
-		for (i = 0; i < 8; i++)
+		for (i = 0; i < 9; i++)
 			if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
 				seq_printf(m, "%s ", hwcap_str[i]);
 		seq_puts(m, "\n");
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 18222ac4078..06201b93cbb 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -696,15 +696,22 @@ static void __init setup_hwcaps(void)
 	 *   Bit 17: the message-security assist is installed
 	 *   Bit 19: the long-displacement facility is installed
 	 *   Bit 21: the extended-immediate facility is installed
+	 *   Bit 22: extended-translation facility 3 is installed
+	 *   Bit 30: extended-translation facility 3 enhancement facility
 	 * These get translated to:
 	 *   HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1,
 	 *   HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3,
-	 *   HWCAP_S390_LDISP bit 4, and HWCAP_S390_EIMM bit 5.
+	 *   HWCAP_S390_LDISP bit 4, HWCAP_S390_EIMM bit 5 and
+	 *   HWCAP_S390_ETF3EH bit 8 (22 && 30).
 	 */
 	for (i = 0; i < 6; i++)
 		if (facility_list & (1UL << (31 - stfl_bits[i])))
 			elf_hwcap |= 1UL << i;
 
+	if ((facility_list & (1UL << (31 - 22)))
+	    && (facility_list & (1UL << (31 - 30))))
+		elf_hwcap |= 1UL << 8;
+
 	/*
 	 * Check for additional facilities with store-facility-list-extended.
 	 * stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0
@@ -716,12 +723,12 @@ static void __init setup_hwcaps(void)
 	 *   Bit 42: decimal floating point facility is installed
 	 *   Bit 44: perform floating point operation facility is installed
 	 * translated to:
-	 *   HWCAP_S390_DFP bit 6.
+	 *   HWCAP_S390_DFP bit 6 (42 && 44).
 	 */
 	if ((elf_hwcap & (1UL << 2)) &&
 	    __stfle(&facility_list_extended, 1) > 0) {
 		if ((facility_list_extended & (1ULL << (63 - 42)))
-		   && (facility_list_extended & (1ULL << (63 - 44))))
+		    && (facility_list_extended & (1ULL << (63 - 44))))
 			elf_hwcap |= 1UL << 6;
 	}
 
-- 
cgit v1.2.3


From c70d0fef1da286d7f96e774674aea2d20cf6222f Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 26 Mar 2009 15:24:57 +0100
Subject: [S390] fix clock comparator save area usage

The lowcore clock comparator save area on 64 bit machines is defined to
contain only the seven most significant bits of the register.
That's also why it starts at an uneven address (0x1331).
The current code however writes eight bytes to the address and
therefore overwrites the first byte of the access register save area.
Fix this and write only seven bytes to the save area.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/reipl64.S | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index c41930499a5..774147824c3 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -1,10 +1,7 @@
 /*
- *  arch/s390/kernel/reipl.S
- *
- *  S390 version
- *    Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com)
-		 Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ *    Copyright IBM Corp 2000,2009
+ *    Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
+ *		 Denis Joseph Barrow,
  */
 
 #include <asm/lowcore.h>
@@ -30,7 +27,7 @@ do_reipl_asm:	basr	%r13,0
 		mvc	__LC_PREFIX_SAVE_AREA-0x1000(4,%r1),0(%r10)
 		stfpc	__LC_FP_CREG_SAVE_AREA-0x1000(%r1)
 		stckc	.Lclkcmp-.Lpg0(%r13)
-		mvc	__LC_CLOCK_COMP_SAVE_AREA-0x1000(8,%r1),.Lclkcmp-.Lpg0(%r13)
+		mvc	__LC_CLOCK_COMP_SAVE_AREA-0x1000(7,%r1),.Lclkcmp-.Lpg0(%r13)
 		stpt	__LC_CPU_TIMER_SAVE_AREA-0x1000(%r1)
 		stg	%r13, __LC_PSW_SAVE_AREA-0x1000+8(%r1)
 
-- 
cgit v1.2.3


From 6f7a321d5feb0bc9aa7f7b14eceb1e6a63bff937 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 26 Mar 2009 15:24:58 +0100
Subject: [S390] cpumask: remove cpu_coregroup_map

Impact: cleanup

cpu_coregroup_mask is the New Hotness.

As S/390 uses theirs internally, so we just make it static.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/topology.h | 1 -
 arch/s390/kernel/topology.c      | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index c979c3b56ab..5e0ad618dc4 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -5,7 +5,6 @@
 
 #define mc_capable()	(1)
 
-cpumask_t cpu_coregroup_map(unsigned int cpu);
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
 
 extern cpumask_t cpu_core_map[NR_CPUS];
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index cc362c9ea8f..3c72c9cf22b 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -74,7 +74,7 @@ static DEFINE_SPINLOCK(topology_lock);
 
 cpumask_t cpu_core_map[NR_CPUS];
 
-cpumask_t cpu_coregroup_map(unsigned int cpu)
+static cpumask_t cpu_coregroup_map(unsigned int cpu)
 {
 	struct core_info *core = &core_info;
 	unsigned long flags;
-- 
cgit v1.2.3


From 93632d1bf7447d445c6fc274c8931152f9412b56 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 26 Mar 2009 15:24:59 +0100
Subject: [S390] cpumask: prepare for iterators to only go to
 nr_cpu_ids/nr_cpumask_bits.

Impact: cleanup, futureproof

In fact, all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids.  So use that instead of NR_CPUS in various
places (I also updated the immediate sites to use the new cpumask_
operators).

This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index fe5f8dc1e6f..13052a4ed71 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -297,8 +297,8 @@ static int smp_rescan_cpus_sigp(cpumask_t avail)
 {
 	int cpu_id, logical_cpu;
 
-	logical_cpu = first_cpu(avail);
-	if (logical_cpu == NR_CPUS)
+	logical_cpu = cpumask_first(&avail);
+	if (logical_cpu >= nr_cpu_ids)
 		return 0;
 	for (cpu_id = 0; cpu_id <= 65535; cpu_id++) {
 		if (cpu_known(cpu_id))
@@ -309,8 +309,8 @@ static int smp_rescan_cpus_sigp(cpumask_t avail)
 			continue;
 		cpu_set(logical_cpu, cpu_present_map);
 		smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED;
-		logical_cpu = next_cpu(logical_cpu, avail);
-		if (logical_cpu == NR_CPUS)
+		logical_cpu = cpumask_next(logical_cpu, &avail);
+		if (logical_cpu >= nr_cpu_ids)
 			break;
 	}
 	return 0;
@@ -322,8 +322,8 @@ static int smp_rescan_cpus_sclp(cpumask_t avail)
 	int cpu_id, logical_cpu, cpu;
 	int rc;
 
-	logical_cpu = first_cpu(avail);
-	if (logical_cpu == NR_CPUS)
+	logical_cpu = cpumask_first(&avail);
+	if (logical_cpu >= nr_cpu_ids)
 		return 0;
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
@@ -344,8 +344,8 @@ static int smp_rescan_cpus_sclp(cpumask_t avail)
 			smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY;
 		else
 			smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED;
-		logical_cpu = next_cpu(logical_cpu, avail);
-		if (logical_cpu == NR_CPUS)
+		logical_cpu = cpumask_next(logical_cpu, &avail);
+		if (logical_cpu >= nr_cpu_ids)
 			break;
 	}
 out:
@@ -591,7 +591,7 @@ static int __init setup_possible_cpus(char *s)
 
 	pcpus = simple_strtoul(s, NULL, 0);
 	cpu_possible_map = cpumask_of_cpu(0);
-	for (cpu = 1; cpu < pcpus && cpu < NR_CPUS; cpu++)
+	for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
 		cpu_set(cpu, cpu_possible_map);
 	return 0;
 }
-- 
cgit v1.2.3


From def6cfb70bab83c0094bc0cedd27c4eda563043e Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 26 Mar 2009 15:25:00 +0100
Subject: [S390] cpumask: Use accessors code.

Impact: use new API

Use the accessors rather than frobbing bits directly.  Most of this is
in arch code I haven't even compiled, but is straightforward.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 13052a4ed71..006ed5016eb 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -590,9 +590,8 @@ static int __init setup_possible_cpus(char *s)
 	int pcpus, cpu;
 
 	pcpus = simple_strtoul(s, NULL, 0);
-	cpu_possible_map = cpumask_of_cpu(0);
-	for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
-		cpu_set(cpu, cpu_possible_map);
+	for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+		set_cpu_possible(cpu, true);
 	return 0;
 }
 early_param("possible_cpus", setup_possible_cpus);
-- 
cgit v1.2.3


From 005f8eee6f3c8173e492d7bd4d51bda990eb468b Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 26 Mar 2009 15:25:01 +0100
Subject: [S390] cpumask: use mm_cpumask() wrapper

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/mmu_context.h | 2 +-
 arch/s390/include/asm/tlbflush.h    | 4 ++--
 arch/s390/mm/pgtable.c              | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 28ec870655a..fc7edd6f41b 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -74,7 +74,7 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
 static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 			     struct task_struct *tsk)
 {
-	cpu_set(smp_processor_id(), next->cpu_vm_mask);
+	cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
 	update_mm(next, tsk);
 }
 
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index d60394b9745..304cffa623e 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -51,7 +51,7 @@ static inline void __tlb_flush_full(struct mm_struct *mm)
 	 * If the process only ran on the local cpu, do a local flush.
 	 */
 	local_cpumask = cpumask_of_cpu(smp_processor_id());
-	if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
+	if (cpumask_equal(mm_cpumask(mm), &local_cpumask))
 		__tlb_flush_local();
 	else
 		__tlb_flush_global();
@@ -73,7 +73,7 @@ static inline void __tlb_flush_idte(unsigned long asce)
 
 static inline void __tlb_flush_mm(struct mm_struct * mm)
 {
-	if (unlikely(cpus_empty(mm->cpu_vm_mask)))
+	if (unlikely(cpumask_empty(mm_cpumask(mm))))
 		return;
 	/*
 	 * If the machine has IDTE we prefer to do a per mm flush
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 9bf86125f6f..be6c1cf4ad5 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -296,7 +296,7 @@ int s390_enable_sie(void)
 	tsk->mm = tsk->active_mm = mm;
 	preempt_disable();
 	update_mm(mm, tsk);
-	cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
 	preempt_enable();
 	task_unlock(tsk);
 	mmput(old_mm);
-- 
cgit v1.2.3


From ef3500b2b2955af4fa6b0564b51c0c604e38c571 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 26 Mar 2009 15:25:02 +0100
Subject: [S390] remove duplicated #includes

Remove duplicated #include's in arch/s390/kernel/ipl.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 56d876904ec..6f3711a0eaa 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -23,7 +23,6 @@
 #include <asm/ebcdic.h>
 #include <asm/reset.h>
 #include <asm/sclp.h>
-#include <asm/setup.h>
 #include <asm/checksum.h>
 
 #define IPL_PARM_BLOCK_VERSION 0
-- 
cgit v1.2.3


From fc2869f6a1993550c2765e934b117e993782db30 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 13 Mar 2009 16:37:48 +0100
Subject: x86: disable __do_IRQ support

Impact: disable unused code

x86 is fully converted to flow handlers. No need to keep the
deprecated __do_IRQ() support active.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bc2fbadff9f..3a330a437c6 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -165,6 +165,9 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+       def_bool y
+
 config GENERIC_IRQ_PROBE
 	bool
 	default y
-- 
cgit v1.2.3


From 17d140402e6f0fd5dde2fdf8d045e3f95f865663 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 14 Jan 2009 23:37:50 +0300
Subject: x86: headers cleanup - setup.h

Impact: cleanup

'make headers_check' warn us about leaking of kernel private
(mostly compile time vars) data to userspace in headers. Fix it.

Guard this one by __KERNEL__.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/setup.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 5a3a1371575..c2308f5250f 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_SETUP_H
 #define _ASM_X86_SETUP_H
 
+#ifdef __KERNEL__
+
 #define COMMAND_LINE_SIZE 2048
 
 #ifndef __ASSEMBLY__
@@ -33,8 +35,6 @@ struct x86_quirks {
 
 #endif /* __ASSEMBLY__ */
 
-#ifdef __KERNEL__
-
 #ifdef __i386__
 
 #include <linux/pfn.h>
-- 
cgit v1.2.3


From 612bfc9e630e3f7a4f3be1325eac28de8b8970af Mon Sep 17 00:00:00 2001
From: Laurent Vivier <Laurent@lvivier.info>
Date: Thu, 30 Oct 2008 21:17:47 +0100
Subject: m68k: Add install target

This patch enables the use of "make install" on m68k architecture
to copy kernel to /boot.

Signed-off-by: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/Makefile   |  3 +++
 arch/m68k/install.sh | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/m68k/install.sh

(limited to 'arch')

diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 8133dbc4496..570d85c3f97 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -117,3 +117,6 @@ endif
 
 archclean:
 	rm -f vmlinux.gz vmlinux.bz2
+
+install:
+	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/m68k/install.sh b/arch/m68k/install.sh
new file mode 100644
index 00000000000..9c6bae6112e
--- /dev/null
+++ b/arch/m68k/install.sh
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install" script for m68k architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
+# User may have a custom install script
+
+if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+
+# Default install - same as make zlilo
+
+if [ -f $4/vmlinuz ]; then
+	mv $4/vmlinuz $4/vmlinuz.old
+fi
+
+if [ -f $4/System.map ]; then
+	mv $4/System.map $4/System.old
+fi
+
+cat $2 > $4/vmlinuz
+cp $3 $4/System.map
+
+sync
-- 
cgit v1.2.3


From 7ad93b42bd135641ddc2c298f030132aca7aeca3 Mon Sep 17 00:00:00 2001
From: Laurent Vivier <Laurent@lvivier.info>
Date: Thu, 6 Nov 2008 20:57:41 +0100
Subject: m68k: mac - Add a new entry in mac_model to identify the floppy
 controller type.

This patch adds a field "floppy_type" which can take the following values:

MAC_FLOPPY_IWM for an IWM based mac
MAC_FLOPPY_SWIM_ADDR1 for a SWIM based mac with controller at VIA1 + 0x1E000
MAC_FLOPPY_SWIM_ADDR2 for a SWIM based mac with controller at VIA1 + 0x16000
MAC_FLOPPY_IOP for an IOP based mac
MAC_FLOPPY_AV for an AV based mac

Signed-off-by: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/include/asm/macintosh.h |   7 ++
 arch/m68k/mac/config.c            | 163 +++++++++++++++++++++++++-------------
 2 files changed, 116 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index 05309f7e3d0..50db3591ca1 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -34,6 +34,7 @@ struct mac_model
 	char scc_type;
 	char ether_type;
 	char nubus_type;
+	char floppy_type;
 };
 
 #define MAC_ADB_NONE		0
@@ -71,6 +72,12 @@ struct mac_model
 #define MAC_NO_NUBUS		0
 #define MAC_NUBUS		1
 
+#define MAC_FLOPPY_IWM		0
+#define MAC_FLOPPY_SWIM_ADDR1	1
+#define MAC_FLOPPY_SWIM_ADDR2	2
+#define MAC_FLOPPY_SWIM_IOP	3
+#define MAC_FLOPPY_AV		4
+
 /*
  *	Gestalt numbers
  */
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 98b6bcfb37b..3a1c0b2862e 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -224,7 +224,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_II,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_IWM
 	},
 
 	/*
@@ -239,7 +240,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_II,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_IWM
 	}, {
 		.ident		= MAC_MODEL_IIX,
 		.name		= "IIx",
@@ -247,7 +249,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_II,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_IICX,
 		.name		= "IIcx",
@@ -255,7 +258,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_II,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_SE30,
 		.name		= "SE/30",
@@ -263,7 +267,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_II,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 
 	/*
@@ -280,7 +285,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_IIFX,
 		.name		= "IIfx",
@@ -288,7 +294,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_IOP,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_IOP
 	}, {
 		.ident		= MAC_MODEL_IISI,
 		.name		= "IIsi",
@@ -296,7 +303,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_IIVI,
 		.name		= "IIvi",
@@ -304,7 +312,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_IIVX,
 		.name		= "IIvx",
@@ -312,7 +321,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 
 	/*
@@ -326,7 +336,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_CCL,
 		.name		= "Color Classic",
@@ -334,7 +345,9 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS},
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+	},
 
 	/*
 	 *	Some Mac LC machines. Basically the same as the IIci, ADB like IIsi
@@ -347,7 +360,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_LCII,
 		.name		= "LC II",
@@ -355,7 +369,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_LCIII,
 		.name		= "LC III",
@@ -363,7 +378,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 
 	/*
@@ -383,7 +399,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_Q605_ACC,
 		.name		= "Quadra 605",
@@ -391,7 +408,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_Q610,
 		.name		= "Quadra 610",
@@ -400,7 +418,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_Q630,
 		.name		= "Quadra 630",
@@ -410,7 +429,8 @@ static struct mac_model mac_data_table[] = {
 		.ide_type	= MAC_IDE_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_Q650,
 		.name		= "Quadra 650",
@@ -419,7 +439,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	},
 	/*	The Q700 does have a NS Sonic */
 	{
@@ -430,7 +451,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA2,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_Q800,
 		.name		= "Quadra 800",
@@ -439,7 +461,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_Q840,
 		.name		= "Quadra 840AV",
@@ -448,7 +471,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA3,
 		.scc_type	= MAC_SCC_PSC,
 		.ether_type	= MAC_ETHER_MACE,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_AV
 	}, {
 		.ident		= MAC_MODEL_Q900,
 		.name		= "Quadra 900",
@@ -457,7 +481,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA2,
 		.scc_type	= MAC_SCC_IOP,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_IOP
 	}, {
 		.ident		= MAC_MODEL_Q950,
 		.name		= "Quadra 950",
@@ -466,7 +491,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA2,
 		.scc_type	= MAC_SCC_IOP,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_IOP
 	},
 
 	/*
@@ -480,7 +506,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_P475,
 		.name		=  "Performa 475",
@@ -488,7 +515,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_P475F,
 		.name		=  "Performa 475",
@@ -496,7 +524,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_P520,
 		.name		=  "Performa 520",
@@ -504,7 +533,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_P550,
 		.name		=  "Performa 550",
@@ -512,7 +542,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 	/* These have the comm slot, and therefore the possibility of SONIC ethernet */
 	{
@@ -523,7 +554,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_II,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_P588,
 		.name		= "Performa 588",
@@ -533,7 +565,8 @@ static struct mac_model mac_data_table[] = {
 		.ide_type	= MAC_IDE_QUADRA,
 		.scc_type	= MAC_SCC_II,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_TV,
 		.name		= "TV",
@@ -541,7 +574,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_P600,
 		.name		= "Performa 600",
@@ -549,7 +583,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 
 	/*
@@ -565,7 +600,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_C650,
 		.name		= "Centris 650",
@@ -574,7 +610,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR1
 	}, {
 		.ident		= MAC_MODEL_C660,
 		.name		= "Centris 660AV",
@@ -583,7 +620,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA3,
 		.scc_type	= MAC_SCC_PSC,
 		.ether_type	= MAC_ETHER_MACE,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_AV
 	},
 
 	/*
@@ -599,7 +637,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB145,
 		.name		= "PowerBook 145",
@@ -607,7 +646,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB150,
 		.name		= "PowerBook 150",
@@ -616,7 +656,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.ide_type	= MAC_IDE_PB,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB160,
 		.name		= "PowerBook 160",
@@ -624,7 +665,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB165,
 		.name		= "PowerBook 165",
@@ -632,7 +674,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB165C,
 		.name		= "PowerBook 165c",
@@ -640,7 +683,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB170,
 		.name		= "PowerBook 170",
@@ -648,7 +692,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB180,
 		.name		= "PowerBook 180",
@@ -656,7 +701,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB180C,
 		.name		= "PowerBook 180c",
@@ -664,7 +710,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB190,
 		.name		= "PowerBook 190",
@@ -673,7 +720,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.ide_type	= MAC_IDE_BABOON,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB520,
 		.name		= "PowerBook 520",
@@ -682,7 +730,8 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 
 	/*
@@ -702,7 +751,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB230,
 		.name		= "PowerBook Duo 230",
@@ -710,7 +760,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB250,
 		.name		= "PowerBook Duo 250",
@@ -718,7 +769,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB270C,
 		.name		= "PowerBook Duo 270c",
@@ -726,7 +778,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB280,
 		.name		= "PowerBook Duo 280",
@@ -734,7 +787,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	}, {
 		.ident		= MAC_MODEL_PB280C,
 		.name		= "PowerBook Duo 280c",
@@ -742,7 +796,8 @@ static struct mac_model mac_data_table[] = {
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
-		.nubus_type	= MAC_NUBUS
+		.nubus_type	= MAC_NUBUS,
+		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
 	},
 
 	/*
-- 
cgit v1.2.3


From 8852ecd97488249ca7fe2c0d3eb44cae95886881 Mon Sep 17 00:00:00 2001
From: Laurent Vivier <laurent@lvivier.info>
Date: Sat, 15 Nov 2008 16:10:10 +0100
Subject: m68k: mac - Add SWIM floppy support

It allows to read data from a floppy, but not to write to, and to eject the
floppy (useful on our Mac without eject button).

Signed-off-by: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/mac/config.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 arch/m68k/mac/via.c    |  9 +++++++++
 2 files changed, 53 insertions(+)

(limited to 'arch')

diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 3a1c0b2862e..be017984a45 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -22,6 +22,7 @@
 /* keyb */
 #include <linux/init.h>
 #include <linux/vt_kern.h>
+#include <linux/platform_device.h>
 
 #define BOOTINFO_COMPAT_1_0
 #include <asm/setup.h>
@@ -43,6 +44,10 @@
 #include <asm/mac_oss.h>
 #include <asm/mac_psc.h>
 
+/* platform device info */
+
+#define SWIM_IO_SIZE 0x2000	/* SWIM IO resource size */
+
 /* Mac bootinfo struct */
 
 struct mac_booter_data mac_bi_data;
@@ -870,3 +875,42 @@ static void mac_get_model(char *str)
 	strcpy(str, "Macintosh ");
 	strcat(str, macintosh_config->name);
 }
+
+static struct resource swim_resources[1];
+
+static struct platform_device swim_device = {
+	.name		= "swim",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(swim_resources),
+	.resource	= swim_resources,
+};
+
+static struct platform_device *mac_platform_devices[] __initdata = {
+	&swim_device
+};
+
+int __init mac_platform_init(void)
+{
+	u8 *swim_base;
+
+	switch (macintosh_config->floppy_type) {
+	case MAC_FLOPPY_SWIM_ADDR1:
+		swim_base = (u8 *)(VIA1_BASE + 0x1E000);
+		break;
+	case MAC_FLOPPY_SWIM_ADDR2:
+		swim_base = (u8 *)(VIA1_BASE + 0x16000);
+		break;
+	default:
+		return 0;
+	}
+
+	swim_resources[0].name = "swim-regs";
+	swim_resources[0].start = (resource_size_t)swim_base;
+	swim_resources[0].end = (resource_size_t)(swim_base + SWIM_IO_SIZE);
+	swim_resources[0].flags = IORESOURCE_MEM;
+
+	return platform_add_devices(mac_platform_devices,
+				    ARRAY_SIZE(mac_platform_devices));
+}
+
+arch_initcall(mac_platform_init);
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 7d97ba54536..11bce3cb648 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -645,3 +645,12 @@ int via_irq_pending(int irq)
 	}
 	return 0;
 }
+
+void via1_set_head(int head)
+{
+	if (head == 0)
+		via1[vBufA] &= ~VIA1A_vHeadSel;
+	else
+		via1[vBufA] |= VIA1A_vHeadSel;
+}
+EXPORT_SYMBOL(via1_set_head);
-- 
cgit v1.2.3


From 4b2873ba0bda7dc747cde8b6c7dc6c0b01ea6213 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Thu, 26 Mar 2009 09:48:45 +0100
Subject: m68k: irq_node.handler() should return irqreturn_t

commit b5dc7840b3ebe9c7967dd8ba73db957767009ff9 ("m68k: introduce irq
controller") reverted the return type of struct irq_node.handler() from
irqreturn_t to int. Change it back to irqreturn_t, else it will give a
compiler warning when irqreturn_t is turned into an enum in the near future:

| arch/m68k/kernel/ints.c:231: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/include/asm/irq_mm.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h
index 226bfc0f21b..0cab42cad79 100644
--- a/arch/m68k/include/asm/irq_mm.h
+++ b/arch/m68k/include/asm/irq_mm.h
@@ -3,6 +3,7 @@
 
 #include <linux/linkage.h>
 #include <linux/hardirq.h>
+#include <linux/irqreturn.h>
 #include <linux/spinlock_types.h>
 
 /*
@@ -80,7 +81,7 @@ struct pt_regs;
  * interrupt source (if it supports chaining).
  */
 typedef struct irq_node {
-	int		(*handler)(int, void *);
+	irqreturn_t	(*handler)(int, void *);
 	void		*dev_id;
 	struct irq_node *next;
 	unsigned long	flags;
-- 
cgit v1.2.3


From e2ab3dff9d515ef69ac7c245b5ad1e348f2106be Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Thu, 26 Mar 2009 16:44:17 -0700
Subject: sparc64: Fix build of timer_interrupt().
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

arch/sparc/kernel/time_64.c: In function ‘timer_interrupt’:
  arch/sparc/kernel/time_64.c:732: error: ‘struct kernel_stat’ has no member named ‘irqs’
  make[1]: *** [arch/sparc/kernel/time_64.o] Error 1

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/kernel/time_64.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 642562d83ec..4ee2e48c4b3 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -724,12 +724,14 @@ void timer_interrupt(int irq, struct pt_regs *regs)
 	unsigned long tick_mask = tick_ops->softint_mask;
 	int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(sparc64_events, cpu);
+	struct irq_desc *desc;
 
 	clear_softint(tick_mask);
 
 	irq_enter();
 
-	kstat_this_cpu.irqs[0]++;
+	desc = irq_to_desc(0);
+	kstat_incr_irqs_this_cpu(0, desc);
 
 	if (unlikely(!evt->event_handler)) {
 		printk(KERN_WARNING
-- 
cgit v1.2.3


From cfa8707aa65f7ec8ed2130937810b4fb05b40cfa Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 26 Mar 2009 15:11:16 +0000
Subject: uml: convert network device to internal network device stats

Convert the UML network device to use internal network device stats.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/um/drivers/net_kern.c        | 19 ++++++-------------
 arch/um/include/shared/net_kern.h |  2 +-
 2 files changed, 7 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index fde510b664d..6d2b1004d1e 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -86,7 +86,7 @@ static int uml_net_rx(struct net_device *dev)
 		drop_skb->dev = dev;
 		/* Read a packet into drop_skb and don't do anything with it. */
 		(*lp->read)(lp->fd, drop_skb, lp);
-		lp->stats.rx_dropped++;
+		dev->stats.rx_dropped++;
 		return 0;
 	}
 
@@ -99,8 +99,8 @@ static int uml_net_rx(struct net_device *dev)
 		skb_trim(skb, pkt_len);
 		skb->protocol = (*lp->protocol)(skb);
 
-		lp->stats.rx_bytes += skb->len;
-		lp->stats.rx_packets++;
+		dev->stats.rx_bytes += skb->len;
+		dev->stats.rx_packets++;
 		netif_rx(skb);
 		return pkt_len;
 	}
@@ -224,8 +224,8 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	len = (*lp->write)(lp->fd, skb, lp);
 
 	if (len == skb->len) {
-		lp->stats.tx_packets++;
-		lp->stats.tx_bytes += skb->len;
+		dev->stats.tx_packets++;
+		dev->stats.tx_bytes += skb->len;
 		dev->trans_start = jiffies;
 		netif_start_queue(dev);
 
@@ -234,7 +234,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 	else if (len == 0) {
 		netif_start_queue(dev);
-		lp->stats.tx_dropped++;
+		dev->stats.tx_dropped++;
 	}
 	else {
 		netif_start_queue(dev);
@@ -248,12 +248,6 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 }
 
-static struct net_device_stats *uml_net_get_stats(struct net_device *dev)
-{
-	struct uml_net_private *lp = netdev_priv(dev);
-	return &lp->stats;
-}
-
 static void uml_net_set_multicast_list(struct net_device *dev)
 {
 	return;
@@ -476,7 +470,6 @@ static void eth_configure(int n, void *init, char *mac,
 	dev->open = uml_net_open;
 	dev->hard_start_xmit = uml_net_start_xmit;
 	dev->stop = uml_net_close;
-	dev->get_stats = uml_net_get_stats;
 	dev->set_multicast_list = uml_net_set_multicast_list;
 	dev->tx_timeout = uml_net_tx_timeout;
 	dev->set_mac_address = uml_net_set_mac;
diff --git a/arch/um/include/shared/net_kern.h b/arch/um/include/shared/net_kern.h
index d843c7924a7..5c367f22595 100644
--- a/arch/um/include/shared/net_kern.h
+++ b/arch/um/include/shared/net_kern.h
@@ -26,7 +26,7 @@ struct uml_net_private {
 	spinlock_t lock;
 	struct net_device *dev;
 	struct timer_list tl;
-	struct net_device_stats stats;
+
 	struct work_struct work;
 	int fd;
 	unsigned char mac[ETH_ALEN];
-- 
cgit v1.2.3


From 8bb95b39a16ed55226810596f92216c53329d2fe Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Thu, 26 Mar 2009 15:11:17 +0000
Subject: uml: convert network device to netdevice ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/um/drivers/net_kern.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 6d2b1004d1e..434224e2229 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -371,6 +371,18 @@ static void net_device_release(struct device *dev)
 	free_netdev(netdev);
 }
 
+static const struct net_device_ops uml_netdev_ops = {
+	.ndo_open 		= uml_net_open,
+	.ndo_stop 		= uml_net_close,
+	.ndo_start_xmit 	= uml_net_start_xmit,
+	.ndo_set_multicast_list = uml_net_set_multicast_list,
+	.ndo_tx_timeout 	= uml_net_tx_timeout,
+	.ndo_set_mac_address	= uml_net_set_mac,
+	.ndo_change_mtu 	= uml_net_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*
  * Ensures that platform_driver_register is called only once by
  * eth_configure.  Will be set in an initcall.
@@ -467,13 +479,7 @@ static void eth_configure(int n, void *init, char *mac,
 
 	set_ether_mac(dev, device->mac);
 	dev->mtu = transport->user->mtu;
-	dev->open = uml_net_open;
-	dev->hard_start_xmit = uml_net_start_xmit;
-	dev->stop = uml_net_close;
-	dev->set_multicast_list = uml_net_set_multicast_list;
-	dev->tx_timeout = uml_net_tx_timeout;
-	dev->set_mac_address = uml_net_set_mac;
-	dev->change_mtu = uml_net_change_mtu;
+	dev->netdev_ops = &uml_netdev_ops;
 	dev->ethtool_ops = &uml_net_ethtool_ops;
 	dev->watchdog_timeo = (HZ >> 1);
 	dev->irq = UM_ETH_IRQ;
-- 
cgit v1.2.3


From f9384d41c02408dd404aa64d66d0ef38adcf6479 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 27 Mar 2009 01:09:17 -0700
Subject: sparc64: Fix MM refcount check in smp_flush_tlb_pending().

As explained by Benjamin Herrenschmidt:

> CPU 0 is running the context, task->mm == task->active_mm == your
> context. The CPU is in userspace happily churning things.
>
> CPU 1 used to run it, not anymore, it's now running fancyfsd which
> is a kernel thread, but current->active_mm still points to that
> same context.
>
> Because there's only one "real" user, mm_users is 1 (but mm_count is
> elevated, it's just that the presence on CPU 1 as active_mm has no
> effect on mm_count().
>
> At this point, fancyfsd decides to invalidate a mapping currently mapped
> by that context, for example because a networked file has changed
> remotely or something like that, using unmap_mapping_ranges().
>
> So CPU 1 goes into the zapping code, which eventually ends up calling
> flush_tlb_pending(). Your test will succeed, as current->active_mm is
> indeed the target mm for the flush, and mm_users is indeed 1. So you
> will -not- send an IPI to the other CPU, and CPU 0 will continue happily
> accessing the pages that should have been unmapped.

To fix this problem, check ->mm instead of ->active_mm, and this
means:

> So if you test current->mm, you effectively account for mm_users == 1,
> so the only way the mm can be active on another processor is as a lazy
> mm for a kernel thread. So your test should work properly as long
> as you don't have a HW that will do speculative TLB reloads into the
> TLB on that other CPU (and even if you do, you flush-on-switch-in should
> get rid of any crap here).

And therefore we should be OK.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 6cd1a5b6506..79457f682b5 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1031,7 +1031,7 @@ void smp_fetch_global_regs(void)
  *    If the address space is non-shared (ie. mm->count == 1) we avoid
  *    cross calls when we want to flush the currently running process's
  *    tlb state.  This is done by clearing all cpu bits except the current
- *    processor's in current->active_mm->cpu_vm_mask and performing the
+ *    processor's in current->mm->cpu_vm_mask and performing the
  *    flush locally only.  This will force any subsequent cpus which run
  *    this task to flush the context from the local tlb if the process
  *    migrates to another cpu (again).
@@ -1074,7 +1074,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 	u32 ctx = CTX_HWBITS(mm->context);
 	int cpu = get_cpu();
 
-	if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1)
+	if (mm == current->mm && atomic_read(&mm->mm_users) == 1)
 		mm->cpu_vm_mask = cpumask_of_cpu(cpu);
 	else
 		smp_cross_call_masked(&xcall_flush_tlb_pending,
-- 
cgit v1.2.3


From 0412d6c9271811b84568fcea3237e2193e21866a Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 25 Mar 2009 19:46:48 +0100
Subject: i.MX1: remove fb support from mach-imx

The lack of an include file currently breaks compilation of
mx1ads_defconfig. As framebuffer support is not actively used for
mach-imx and the whole architecture will be replaced by mach-mx1
soon, just remove fb support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/generic.c | 36 ------------------------------------
 1 file changed, 36 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 887cb21f75b..05f1739ee12 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,7 +29,6 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/imx-regs.h>
 
@@ -245,43 +244,8 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
 	imx_mmc_device.dev.platform_data = info;
 }
 
-static struct imx_fb_platform_data imx_fb_info;
-
-void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info)
-{
-	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data));
-}
-
-static struct resource imxfb_resources[] = {
-	[0] = {
-		.start	= 0x00205000,
-		.end	= 0x002050FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LCDC_INT,
-		.end	= LCDC_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-static struct platform_device imxfb_device = {
-	.name		= "imx-fb",
-	.id		= 0,
-	.dev		= {
- 		.platform_data	= &imx_fb_info,
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imxfb_resources),
-	.resource	= imxfb_resources,
-};
-
 static struct platform_device *devices[] __initdata = {
 	&imx_mmc_device,
-	&imxfb_device,
 };
 
 static struct map_desc imx_io_desc[] __initdata = {
-- 
cgit v1.2.3


From 05fd8e73e1357feaea9c48938d937eae76b4aef4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Mar 2009 12:55:49 +0100
Subject: clkdev: add possibility to get a clock based on the device name

This adds clk_get_sys to get a clock without the associated struct
device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/common/clkdev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 1037bba1832..5589444ff43 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -62,9 +62,8 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
 	return clk;
 }
 
-struct clk *clk_get(struct device *dev, const char *con_id)
+struct clk *clk_get_sys(const char *dev_id, const char *con_id)
 {
-	const char *dev_id = dev ? dev_name(dev) : NULL;
 	struct clk *clk;
 
 	mutex_lock(&clocks_mutex);
@@ -75,6 +74,14 @@ struct clk *clk_get(struct device *dev, const char *con_id)
 
 	return clk ? clk : ERR_PTR(-ENOENT);
 }
+EXPORT_SYMBOL(clk_get_sys);
+
+struct clk *clk_get(struct device *dev, const char *con_id)
+{
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+
+	return clk_get_sys(dev_id, con_id);
+}
 EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
-- 
cgit v1.2.3


From 74bef9a4fa978669b234c4454daa596c0494c09a Mon Sep 17 00:00:00 2001
From: Ilya Yanok <yanok@emcraft.com>
Date: Tue, 3 Mar 2009 02:49:23 +0300
Subject: mxc: add arch_reset() function

This patch adds arch_reset() function for all mxc platforms.

It also removes (unsused) arch/arm/mach-mx2/system.c file.

This patch has been tested on i.MX1/27/31/35

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Makefile              |  2 +-
 arch/arm/mach-mx2/system.c              | 63 -------------------------------
 arch/arm/plat-mxc/Makefile              |  2 +-
 arch/arm/plat-mxc/include/mach/system.h |  5 +--
 arch/arm/plat-mxc/system.c              | 67 +++++++++++++++++++++++++++++++++
 5 files changed, 70 insertions(+), 69 deletions(-)
 delete mode 100644 arch/arm/mach-mx2/system.c
 create mode 100644 arch/arm/plat-mxc/system.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 6e1a2bffc81..950649a9154 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y	:=  system.o generic.o devices.o serial.o
+obj-y	:=  generic.o devices.o serial.o
 
 obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
deleted file mode 100644
index 92c79d4bd16..00000000000
--- a/arch/arm/mach-mx2/system.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/proc-fns.h>
-#include <asm/system.h>
-
-/*
- * Put the CPU into idle mode. It is called by default_idle()
- * in process.c file.
- */
-void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks.
-	 */
-	cpu_do_idle();
-}
-
-#define WDOG_WCR_REG                    IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_SRS                    (1 << 4)
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void arch_reset(char mode, const char *cmd)
-{
-	struct clk *clk;
-
-	clk = clk_get(NULL, "wdog_clk");
-	if (!clk) {
-		printk(KERN_ERR"Cannot activate the watchdog. Giving up\n");
-		return;
-	}
-
-	clk_enable(clk);
-
-	/* Assert SRS signal */
-	__raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG);
-}
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 564fd4ebf38..055406312b6 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index cd03ebaa49b..e56241af870 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -26,9 +26,6 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
+void arch_reset(char mode, const char *cmd);
 
 #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
new file mode 100644
index 00000000000..79c37577c91
--- /dev/null
+++ b/arch/arm/plat-mxc/system.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_ARCH_MX1
+#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
+#define WDOG_WCR_ENABLE		(1 << 0)
+#else
+#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
+#define WDOG_WCR_ENABLE		(1 << 2)
+#endif
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void arch_reset(char mode, const char *cmd)
+{
+	if (!cpu_is_mx1()) {
+		struct clk *clk;
+
+		clk = clk_get_sys("imx-wdt.0", NULL);
+		if (!IS_ERR(clk))
+			clk_enable(clk);
+	}
+
+	/* Assert SRS signal */
+	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
+}
-- 
cgit v1.2.3


From ec621699031b298eadd7e364f65281291b19ea37 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 26 Mar 2009 12:23:23 +0100
Subject: i.MX21/27: remove ifdef CONFIG_FB_IMX

Compile in the framebuffer device unconditionally to fix pcm038
compilation without framebuffer support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index f81aa8a8fbb..a0f1b367432 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -229,7 +229,6 @@ struct platform_device mxc_nand_device = {
 	.resource = mxc_nand_resources,
 };
 
-#ifdef CONFIG_FB_IMX
 /*
  * lcdc:
  * - i.MX1: the basic controller
@@ -259,7 +258,6 @@ struct platform_device mxc_fb_device = {
 		.coherent_dma_mask = 0xFFFFFFFF,
 	},
 };
-#endif
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_fec_resources[] = {
-- 
cgit v1.2.3


From 66f3e6afa8e48486c4dd535d616fbfe04569fbd4 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Fri, 27 Mar 2009 16:55:41 +0100
Subject: [IA64] Fix kstat_this_cpu build breakage

arch/ia64/kernel/irq_ia64.c: In function 'ia64_handle_irq':
arch/ia64/kernel/irq_ia64.c:498: error: 'struct kernel_stat' has no member named 'irqs'
arch/ia64/kernel/irq_ia64.c:500: error: 'struct kernel_stat' has no member named 'irqs'
arch/ia64/kernel/irq_ia64.c: In function 'ia64_process_pending_intr':
arch/ia64/kernel/irq_ia64.c:556: error: 'struct kernel_stat' has no member named 'irqs'
arch/ia64/kernel/irq_ia64.c:558: error: 'struct kernel_stat' has no member named 'irqs'

Fix build breakage due to recent kstat_this_cpu changes in:
   d7e51e66899f95dabc89b4d4c6674a6e50fa37fc
   sparseirq: make some func to be used with genirq

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/irq_ia64.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 28d3d483db9..977a6ef1332 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -493,14 +493,16 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 	saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
 	ia64_srlz_d();
 	while (vector != IA64_SPURIOUS_INT_VECTOR) {
+		struct irq_desc *desc;
+		int irq = local_vector_to_irq(vector);
+
+		desc = irq_desc + irq;
 		if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
 			smp_local_flush_tlb();
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(irq, desc);
 		} else if (unlikely(IS_RESCHEDULE(vector)))
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(irq, desc);
 		else {
-			int irq = local_vector_to_irq(vector);
-
 			ia64_setreg(_IA64_REG_CR_TPR, vector);
 			ia64_srlz_d();
 
@@ -543,22 +545,25 @@ void ia64_process_pending_intr(void)
 
 	vector = ia64_get_ivr();
 
-	 irq_enter();
-	 saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
-	 ia64_srlz_d();
+	irq_enter();
+	saved_tpr = ia64_getreg(_IA64_REG_CR_TPR);
+	ia64_srlz_d();
 
 	 /*
 	  * Perform normal interrupt style processing
 	  */
 	while (vector != IA64_SPURIOUS_INT_VECTOR) {
+		struct irq_desc *desc;
+		int irq = local_vector_to_irq(vector);
+		desc = irq_desc + irq;
+
 		if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) {
 			smp_local_flush_tlb();
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(irq, desc);
 		} else if (unlikely(IS_RESCHEDULE(vector)))
-			kstat_this_cpu.irqs[vector]++;
+			kstat_incr_irqs_this_cpu(irq, desc);
 		else {
 			struct pt_regs *old_regs = set_irq_regs(NULL);
-			int irq = local_vector_to_irq(vector);
 
 			ia64_setreg(_IA64_REG_CR_TPR, vector);
 			ia64_srlz_d();
-- 
cgit v1.2.3


From 2b1c6bd77d4e6a727ffac8630cd154b2144b751a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 28 Nov 2008 10:09:09 +0100
Subject: generic compat_sys_ustat

Due to a different size of ino_t ustat needs a compat handler, but
currently only x86 and mips provide one.  Add a generic compat_sys_ustat
and switch all architectures over to it.  Instead of doing various
user copy hacks compat_sys_ustat just reimplements sys_ustat as
it's trivial.  This was suggested by Arnd Bergmann.

Found by Eric Sandeen when running xfstests/017 on ppc64, which causes
stack smashing warnings on RHEL/Fedora due to the too large amount of
data writen by the syscall.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/ia64/ia32/ia32_entry.S        |  2 +-
 arch/mips/kernel/linux32.c         | 34 ----------------------------------
 arch/mips/kernel/scall64-n32.S     |  2 +-
 arch/mips/kernel/scall64-o32.S     |  2 +-
 arch/parisc/kernel/syscall_table.S |  2 +-
 arch/powerpc/include/asm/systbl.h  |  2 +-
 arch/s390/kernel/compat_wrapper.S  |  2 +-
 arch/x86/ia32/ia32entry.S          |  2 +-
 arch/x86/ia32/sys_ia32.c           | 22 ----------------------
 arch/x86/include/asm/ia32.h        |  7 -------
 arch/x86/include/asm/sys_ia32.h    |  2 --
 11 files changed, 7 insertions(+), 72 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index a46f8395e9a..af9405cd70e 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -240,7 +240,7 @@ ia32_syscall_table:
 	data8 sys_ni_syscall
 	data8 sys_umask		  /* 60 */
 	data8 sys_chroot
-	data8 sys_ustat
+	data8 compat_sys_ustat
 	data8 sys_dup2
 	data8 sys_getppid
 	data8 sys_getpgrp	  /* 65 */
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 1a86f84fa94..784859cedef 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -356,40 +356,6 @@ SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 	return ret;
 }
 
-/* ustat compatibility */
-struct ustat32 {
-	compat_daddr_t	f_tfree;
-	compat_ino_t	f_tinode;
-	char		f_fname[6];
-	char		f_fpack[6];
-};
-
-extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
-
-SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
-{
-	int err;
-	struct ustat tmp;
-	struct ustat32 tmp32;
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(KERNEL_DS);
-	err = sys_ustat(dev, (struct ustat __user *)&tmp);
-	set_fs(old_fs);
-
-	if (err)
-		goto out;
-
-	memset(&tmp32, 0, sizeof(struct ustat32));
-	tmp32.f_tfree = tmp.f_tfree;
-	tmp32.f_tinode = tmp.f_tinode;
-
-	err = copy_to_user(ubuf32, &tmp32, sizeof(struct ustat32)) ? -EFAULT : 0;
-
-out:
-	return err;
-}
-
 SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
 	compat_off_t __user *, offset, s32, count)
 {
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 7438e92f8a0..f61d6b0e573 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -253,7 +253,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_utime		/* 6130 */
 	PTR	sys_mknod
 	PTR	sys_32_personality
-	PTR	sys_32_ustat
+	PTR	compat_sys_ustat
 	PTR	compat_sys_statfs
 	PTR	compat_sys_fstatfs		/* 6135 */
 	PTR	sys_sysfs
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index b0fef4ff982..60997f1f69d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -265,7 +265,7 @@ sys_call_table:
 	PTR	sys_olduname
 	PTR	sys_umask			/* 4060 */
 	PTR	sys_chroot
-	PTR	sys_32_ustat
+	PTR	compat_sys_ustat
 	PTR	sys_dup2
 	PTR	sys_getppid
 	PTR	sys_getpgrp			/* 4065 */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 303d2b647e4..03b9a01bc16 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -130,7 +130,7 @@
 	ENTRY_OURS(newuname)
 	ENTRY_SAME(umask)		/* 60 */
 	ENTRY_SAME(chroot)
-	ENTRY_SAME(ustat)
+	ENTRY_COMP(ustat)
 	ENTRY_SAME(dup2)
 	ENTRY_SAME(getppid)
 	ENTRY_SAME(getpgrp)		/* 65 */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 72353f6070a..fe166491e9d 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -65,7 +65,7 @@ SYSCALL(ni_syscall)
 SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
 COMPAT_SYS_SPU(umask)
 SYSCALL_SPU(chroot)
-SYSCALL(ustat)
+COMPAT_SYS(ustat)
 SYSCALL_SPU(dup2)
 SYSCALL_SPU(getppid)
 SYSCALL_SPU(getpgrp)
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 62c706eb0de..87cf5a79a35 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -252,7 +252,7 @@ sys32_chroot_wrapper:
 sys32_ustat_wrapper:
 	llgfr	%r2,%r2			# dev_t
 	llgtr	%r3,%r3			# struct ustat *
-	jg	sys_ustat
+	jg	compat_sys_ustat
 
 	.globl	sys32_dup2_wrapper
 sys32_dup2_wrapper:
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 5a0d76dc56a..8ef8876666b 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -557,7 +557,7 @@ ia32_sys_call_table:
 	.quad sys32_olduname
 	.quad sys_umask		/* 60 */
 	.quad sys_chroot
-	.quad sys32_ustat
+	.quad compat_sys_ustat
 	.quad sys_dup2
 	.quad sys_getppid
 	.quad sys_getpgrp		/* 65 */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 6c0d7f6231a..efac92fd1ef 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -638,28 +638,6 @@ long sys32_uname(struct old_utsname __user *name)
 	return err ? -EFAULT : 0;
 }
 
-long sys32_ustat(unsigned dev, struct ustat32 __user *u32p)
-{
-	struct ustat u;
-	mm_segment_t seg;
-	int ret;
-
-	seg = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ustat(dev, (struct ustat __user *)&u);
-	set_fs(seg);
-	if (ret < 0)
-		return ret;
-
-	if (!access_ok(VERIFY_WRITE, u32p, sizeof(struct ustat32)) ||
-	    __put_user((__u32) u.f_tfree, &u32p->f_tfree) ||
-	    __put_user((__u32) u.f_tinode, &u32p->f_tfree) ||
-	    __copy_to_user(&u32p->f_fname, u.f_fname, sizeof(u.f_fname)) ||
-	    __copy_to_user(&u32p->f_fpack, u.f_fpack, sizeof(u.f_fpack)))
-		ret = -EFAULT;
-	return ret;
-}
-
 asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 			     compat_uptr_t __user *envp, struct pt_regs *regs)
 {
diff --git a/arch/x86/include/asm/ia32.h b/arch/x86/include/asm/ia32.h
index 50ca486fd88..1f7e6251728 100644
--- a/arch/x86/include/asm/ia32.h
+++ b/arch/x86/include/asm/ia32.h
@@ -129,13 +129,6 @@ typedef struct compat_siginfo {
 	} _sifields;
 } compat_siginfo_t;
 
-struct ustat32 {
-	__u32			f_tfree;
-	compat_ino_t		f_tinode;
-	char			f_fname[6];
-	char			f_fpack[6];
-};
-
 #define IA32_STACK_TOP IA32_PAGE_OFFSET
 
 #ifdef __KERNEL__
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index ffb08be2a53..72a6dcd1299 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -70,8 +70,6 @@ struct old_utsname;
 asmlinkage long sys32_olduname(struct oldold_utsname __user *);
 long sys32_uname(struct old_utsname __user *);
 
-long sys32_ustat(unsigned, struct ustat32 __user *);
-
 asmlinkage long sys32_execve(char __user *, compat_uptr_t __user *,
 			     compat_uptr_t __user *, struct pt_regs *);
 asmlinkage long sys32_clone(unsigned int, unsigned int, struct pt_regs *);
-- 
cgit v1.2.3


From 10f303ae1e5e77a9f7cb053e6329906afb132c67 Mon Sep 17 00:00:00 2001
From: Cheng Renquan <crquan@gmail.com>
Date: Wed, 14 Jan 2009 17:01:33 +0800
Subject: do_pipe cleanup: drop its last user in arch/alpha/

The last user of do_pipe is in arch/alpha/, after replacing it with
do_pipe_flags, the do_pipe can be totally dropped.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/alpha/kernel/entry.S   | 3 ++-
 arch/alpha/kernel/osf_sys.c | 2 --
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index e4a54b61589..b45d913a51c 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -903,8 +903,9 @@ sys_alpha_pipe:
 	stq	$26, 0($sp)
 	.prologue 0
 
+	mov	$31, $17
 	lda	$16, 8($sp)
-	jsr	$26, do_pipe
+	jsr	$26, do_pipe_flags
 
 	ldq	$26, 0($sp)
 	bne	$0, 1f
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index ae41f097864..42ee05981e7 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -46,8 +46,6 @@
 #include <asm/hwrpb.h>
 #include <asm/processor.h>
 
-extern int do_pipe(int *);
-
 /*
  * Brk needs to return an error.  Still support Linux's brk(0) query idiom,
  * which OSF programs just shouldn't be doing.  We're still not quite
-- 
cgit v1.2.3


From 3ba13d179e8c24c68eac32b93593a6b10fcd1572 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 20 Feb 2009 06:02:22 +0000
Subject: constify dentry_operations: rest

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/ia64/kernel/perfmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 0e499757309..5c0f408cfd7 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2196,7 +2196,7 @@ pfmfs_delete_dentry(struct dentry *dentry)
 	return 1;
 }
 
-static struct dentry_operations pfmfs_dentry_operations = {
+static const struct dentry_operations pfmfs_dentry_operations = {
 	.d_delete = pfmfs_delete_dentry,
 };
 
-- 
cgit v1.2.3


From 6e8a4fa651975ff808dba130eae442f4cea1671c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 27 Mar 2009 18:15:02 -0700
Subject: sparc64: We need to use compat_sys_ustat() as well.

Sparc was missed in commit 2b1c6bd77d4e6a727ffac8630cd154b2144b751a
("generic compat_sys_ustat").  We definitely need it, since our
__kernel_ino_t is "unsigned long".

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/systbls_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index f93c42a2b52..a8000b1cda7 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -51,7 +51,7 @@ sys_call_table32:
 /*150*/	.word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
 	.word compat_sys_fcntl64, sys_inotify_rm_watch, compat_sys_statfs, compat_sys_fstatfs, sys_oldumount
 /*160*/	.word compat_sys_sched_setaffinity, compat_sys_sched_getaffinity, sys32_getdomainname, sys32_setdomainname, sys_nis_syscall
-	.word sys_quotactl, sys_set_tid_address, compat_sys_mount, sys_ustat, sys32_setxattr
+	.word sys_quotactl, sys_set_tid_address, compat_sys_mount, compat_sys_ustat, sys32_setxattr
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-- 
cgit v1.2.3


From 085780d5bb53edbc008156c310ac512aabd23610 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 28 Mar 2009 17:43:01 +0800
Subject: Blackfin arch: include linux headers that this one uses definitions
 from fro sport drivers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/bfin_sport.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index 65a651db5b0..d4169590e75 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -9,6 +9,13 @@
 #ifndef __BFIN_SPORT_H__
 #define __BFIN_SPORT_H__
 
+#ifdef __KERNEL__
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#endif
+
 #define SPORT_MAJOR	237
 #define SPORT_NR_DEVS	2
 
-- 
cgit v1.2.3


From c9b78189f50dcba6e69080268873a62c67e4bc15 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 27 Mar 2009 22:00:09 +0100
Subject: [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins

Reported-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c | 2 +-
 arch/arm/mach-pxa/colibri-pxa320.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 169ab552c21..10c2eaf9323 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -172,7 +172,7 @@ void __init colibri_pxa300_init(void)
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
 	colibri_pxa300_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO13));
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 573a9a1dd52..55b74a7a615 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -169,7 +169,7 @@ void __init colibri_pxa320_init(void)
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
 	colibri_pxa320_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
-- 
cgit v1.2.3


From a66648756f97ea5150875b85a0177c33e41afc1d Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Sat, 28 Mar 2009 23:46:17 +0800
Subject: Blackfin arch: update default kernel configuration

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/configs/BF518F-EZBRD_defconfig |  42 +++++--
 arch/blackfin/configs/BF526-EZBRD_defconfig  | 140 +++++++++++++----------
 arch/blackfin/configs/BF527-EZKIT_defconfig  | 150 +++++++++++++-----------
 arch/blackfin/configs/BF533-EZKIT_defconfig  |  54 +++++----
 arch/blackfin/configs/BF533-STAMP_defconfig  | 100 ++++++----------
 arch/blackfin/configs/BF537-STAMP_defconfig  |  97 ++++++----------
 arch/blackfin/configs/BF538-EZKIT_defconfig  | 101 ++++++-----------
 arch/blackfin/configs/BF548-EZKIT_defconfig  | 163 ++++++++++++++-------------
 arch/blackfin/configs/BF561-EZKIT_defconfig  |  54 +++++----
 arch/blackfin/configs/BlackStamp_defconfig   |   4 +-
 arch/blackfin/configs/CM-BF527_defconfig     |   6 +-
 arch/blackfin/configs/CM-BF533_defconfig     |   4 +-
 arch/blackfin/configs/CM-BF537E_defconfig    |   4 +-
 arch/blackfin/configs/CM-BF537U_defconfig    |   4 +-
 arch/blackfin/configs/CM-BF548_defconfig     |   4 +-
 arch/blackfin/configs/CM-BF561_defconfig     |   4 +-
 arch/blackfin/configs/H8606_defconfig        |   4 +-
 arch/blackfin/configs/IP0X_defconfig         |   4 +-
 arch/blackfin/configs/PNAV-10_defconfig      |  39 +++++--
 arch/blackfin/configs/SRV1_defconfig         |   4 +-
 arch/blackfin/configs/TCM-BF537_defconfig    |   6 +-
 21 files changed, 501 insertions(+), 487 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 281f4b60e60..c121d6e6e2b 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Feb 20 10:01:44 2009
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -43,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -314,7 +313,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -375,7 +374,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -634,6 +632,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -793,6 +792,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -816,6 +816,12 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -865,7 +871,26 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_SDH_BFIN=m
+CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
+CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1121,7 +1146,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 8e2b855b8db..3e562b2775d 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -55,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -132,15 +132,20 @@ CONFIG_BF526=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
 # CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
@@ -313,7 +318,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -374,7 +379,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -583,7 +587,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -637,6 +643,7 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -815,6 +822,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -838,6 +846,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -896,6 +905,12 @@ CONFIG_BFIN_WDT=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -904,8 +919,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -940,55 +957,7 @@ CONFIG_BFIN_WDT=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BLACKFIN_AD1836 is not set
-# CONFIG_SND_BFIN_AD73322 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_BF5XX_I2S=m
-CONFIG_SND_BF5XX_SOC_SSM2602=m
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_SSM2602=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
+# CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1063,13 +1032,15 @@ CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SOC=y
 
 #
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
 #
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
+CONFIG_MUSB_DMA_POLL=y
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1081,18 +1052,33 @@ CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
 
 #
 # USB port drivers
@@ -1124,6 +1110,30 @@ CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1158,12 +1168,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1384,6 +1396,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1423,6 +1442,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index a50050f1770..911b5dba1db 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -133,15 +132,20 @@ CONFIG_BF527=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
 # CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
@@ -314,7 +318,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -375,7 +379,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -626,7 +629,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -681,6 +686,7 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -755,8 +761,8 @@ CONFIG_INPUT_MISC=y
 # CONFIG_SPI_ADC_BF533 is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 CONFIG_BFIN_DMA_INTERFACE=m
@@ -859,6 +865,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -871,60 +878,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -940,6 +894,12 @@ CONFIG_BFIN_WDT=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -948,8 +908,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1000,6 +962,7 @@ CONFIG_FB_BFIN_T350MCQB=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
 CONFIG_LCD_LTV350QV=m
@@ -1152,13 +1115,15 @@ CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SOC=y
 
 #
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
 #
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
+CONFIG_MUSB_DMA_POLL=y
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1170,18 +1135,33 @@ CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
 
 #
 # USB port drivers
@@ -1213,6 +1193,30 @@ CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1247,12 +1251,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1473,6 +1479,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1512,6 +1525,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 0a2a00d6388..4c41e03efe0 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -133,10 +132,15 @@ CONFIG_BF533=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=3
 CONFIG_BF_REV_MAX=6
@@ -157,7 +161,6 @@ CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
 # CONFIG_BFIN532_IP0X is not set
-# CONFIG_GENERIC_BF533_BOARD is not set
 
 #
 # BF533/2/1 Specific Configuration
@@ -277,7 +280,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -575,6 +578,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -608,6 +612,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -714,6 +719,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -726,22 +732,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -752,6 +743,12 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -760,7 +757,7 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -826,6 +823,7 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1046,6 +1044,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1084,6 +1089,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index eb027587a35..9c482cd1b34 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -133,10 +132,15 @@ CONFIG_BF533=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=3
 CONFIG_BF_REV_MAX=6
@@ -157,7 +161,6 @@ CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
 # CONFIG_BFIN532_IP0X is not set
-# CONFIG_GENERIC_BF533_BOARD is not set
 
 #
 # BF533/2/1 Specific Configuration
@@ -277,7 +280,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -578,7 +581,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -612,6 +617,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -671,10 +677,10 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 # CONFIG_SPI_ADC_BF533 is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
+# CONFIG_TWI_LCD is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
@@ -765,6 +771,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -777,60 +784,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -841,6 +795,12 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -851,6 +811,7 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -909,6 +870,7 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1018,12 +980,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1244,6 +1208,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1282,6 +1253,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 9e62b9f40eb..591f6edda4f 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Dec 30 17:24:37 2008
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -37,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,10 +132,15 @@ CONFIG_BF537=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
 CONFIG_BF_REV_MAX=3
@@ -184,7 +187,6 @@ CONFIG_BFIN537_STAMP=y
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -589,7 +591,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -644,6 +648,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -706,10 +711,10 @@ CONFIG_SERIO_LIBPS2=y
 # CONFIG_SPI_ADC_BF533 is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+CONFIG_BF5xx_PPI=m
 CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_TWI_LCD=m
+# CONFIG_TWI_LCD is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
@@ -808,6 +813,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -820,60 +826,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -884,6 +837,12 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -894,6 +853,7 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -957,6 +917,7 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_LTV350QV is not set
@@ -1074,12 +1035,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1300,6 +1263,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1338,6 +1308,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index dd6ad6be1c8..1a8e8c3adf9 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -55,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -132,10 +132,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF538=y
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=4
 CONFIG_BF_REV_MAX=5
@@ -293,7 +298,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -354,7 +359,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -645,6 +649,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -690,7 +695,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
-CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_TOUCHSCREEN_AD7879=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -718,8 +723,8 @@ CONFIG_INPUT_MISC=y
 # CONFIG_SPI_ADC_BF533 is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 CONFIG_BFIN_DMA_INTERFACE=m
@@ -762,7 +767,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
+CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
@@ -774,7 +779,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
@@ -818,6 +823,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -830,60 +836,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -894,6 +847,12 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -904,6 +863,7 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -954,6 +914,7 @@ CONFIG_FB_BFIN_LQ035Q1=m
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1007,12 +968,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1233,6 +1196,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1271,6 +1241,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 6bc2fb1b2a7..2cd1c2b218d 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -133,16 +132,21 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 CONFIG_BF548=y
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
+CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
@@ -348,7 +352,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
@@ -413,7 +417,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -512,9 +515,9 @@ CONFIG_IRCOMM=m
 #
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
-CONFIG_BFIN_SIR3=y
 # CONFIG_BFIN_SIR0 is not set
 # CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
 CONFIG_SIR_BFIN_DMA=y
 # CONFIG_SIR_BFIN_PIO is not set
 
@@ -538,7 +541,8 @@ CONFIG_SIR_BFIN_DMA=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -554,7 +558,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -668,7 +674,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -743,6 +751,7 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -751,8 +760,16 @@ CONFIG_NETDEV_10000=y
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
 
 #
 # USB Network Adapters
@@ -844,8 +861,8 @@ CONFIG_INPUT_MISC=y
 # CONFIG_SPI_ADC_BF533 is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
+CONFIG_BF5xx_PPI=m
+CONFIG_BFIN_SPORT=m
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 CONFIG_BFIN_DMA_INTERFACE=m
@@ -950,6 +967,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -962,60 +980,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -1031,6 +996,12 @@ CONFIG_BFIN_WDT=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -1039,8 +1010,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1092,6 +1065,7 @@ CONFIG_FB_BF54X_LQ043=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1243,15 +1217,15 @@ CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SOC=y
 
 #
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
 #
 CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_MUSB_DMA_POLL=y
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1263,11 +1237,11 @@ CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1321,7 +1295,31 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1337,8 +1335,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-CONFIG_SDH_BFIN=m
+CONFIG_SDH_BFIN=y
 # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1373,12 +1372,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1641,6 +1642,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1680,6 +1688,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 69714fb3e60..4a6ea8e31df 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -36,14 +36,13 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +55,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -133,10 +132,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 CONFIG_BF561=y
 # CONFIG_SMP is not set
 CONFIG_BF_REV_MIN=3
@@ -166,7 +170,6 @@ CONFIG_IRQ_SPI_ERROR=7
 CONFIG_BFIN561_EZKIT=y
 # CONFIG_BFIN561_TEPLA is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_GENERIC_BF561_BOARD is not set
 
 #
 # BF561 Specific Configuration
@@ -316,7 +319,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -382,7 +385,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -612,6 +614,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -645,6 +648,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -751,6 +755,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -763,22 +768,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -789,6 +779,12 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -797,7 +793,7 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1041,6 +1037,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1079,6 +1082,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 017c6ea071b..ef1a2c84ace 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -43,7 +43,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,7 +56,7 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index d880ef78677..e2fc588e433 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -43,7 +43,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,13 +56,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 085211b9e4e..65a8bbb8d64 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -46,7 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 750203e27a4..9b7e9d78114 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -46,7 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index dec8a7d5cc0..569523c1c03 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -46,7 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index f410430b4e3..035b635e599 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -46,7 +46,7 @@ CONFIG_FAIR_USER_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 346bc7af8f4..7015e42ccce 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -46,7 +46,7 @@ CONFIG_FAIR_USER_SCHED=y
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index bd553da15db..dfc8e1ddd77 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -45,7 +45,7 @@ CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -56,7 +56,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 7db93874c98..95a5f91aeba 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -46,7 +46,7 @@ CONFIG_SYSFS_DEPRECATED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -57,7 +57,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ad096702ac1..78e24080e7f 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -35,13 +35,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -53,13 +52,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -130,10 +129,15 @@ CONFIG_BF537=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
 CONFIG_BF_REV_MAX=3
@@ -180,7 +184,6 @@ CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 CONFIG_PNAV10=y
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -341,7 +344,6 @@ CONFIG_BINFMT_ZFLAT=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -538,7 +540,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -593,6 +597,7 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -776,6 +781,7 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -799,6 +805,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -845,6 +852,12 @@ CONFIG_HWMON=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -853,8 +866,10 @@ CONFIG_HWMON=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -910,6 +925,7 @@ CONFIG_FB_BFIN_LANDSCAPE=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_LTV350QV is not set
@@ -966,7 +982,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -1003,12 +1019,14 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1196,6 +1214,10 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1230,6 +1252,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index a46529c6ade..2bc0779d22e 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -49,7 +49,7 @@ CONFIG_SYSFS_DEPRECATED=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -61,7 +61,7 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 97a1f1d20dc..e65b3a49214 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -39,7 +39,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
+# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 CONFIG_SYSCTL_SYSCALL=y
@@ -51,13 +51,13 @@ CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
-CONFIG_AIO=y
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
-- 
cgit v1.2.3


From e1312bfcc25f9301f997bf1ce84355a0f1167847 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 28 Mar 2009 21:18:45 +0800
Subject: Blackfin arch: add a check to make sure only Blackfin GPIOs may
 generate IRQs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/gpio.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index d4a082ef75b..3c99ddc8df1 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -303,7 +303,10 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return (gpio + GPIO_IRQ_BASE);
+	if (likely(gpio < MAX_BLACKFIN_GPIOS))
+		return gpio + GPIO_IRQ_BASE;
+
+	return -EINVAL;
 }
 
 static inline int irq_to_gpio(unsigned irq)
-- 
cgit v1.2.3


From ffc89627ae14b46f41836ddabdc9dc77c597eca5 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 28 Mar 2009 20:31:33 +0800
Subject: Blackfin arch: bf51x processors also have 8 timers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/gptimers.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index 0520d2aac8f..a29f649e172 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -15,9 +15,9 @@
 #include <asm/blackfin.h>
 
 /*
- * BF537/BF527: 8 timers:
+ * BF51x/BF52x/BF537: 8 timers:
  */
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(CONFIG_BF51x) || defined(BF527_FAMILY) || defined(BF537_FAMILY)
 # define MAX_BLACKFIN_GPTIMERS 8
 # define TIMER0_GROUP_REG      TIMER_ENABLE
 #endif
-- 
cgit v1.2.3


From 269647dc8f3b557d0f9ec59533a5e651cc109efb Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 28 Mar 2009 20:32:57 +0800
Subject: Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x

convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x as the defines
are redundant in these cases

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/gpio.h                 |  2 +-
 arch/blackfin/include/asm/gptimers.h             |  4 +-
 arch/blackfin/kernel/bfin_gpio.c                 | 54 ++++++++++++------------
 arch/blackfin/mach-bf518/include/mach/blackfin.h |  2 -
 arch/blackfin/mach-bf527/include/mach/blackfin.h |  2 -
 arch/blackfin/mach-bf548/include/mach/blackfin.h |  2 -
 6 files changed, 30 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 3c99ddc8df1..fe139619351 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -110,7 +110,7 @@
 * MODIFICATION HISTORY :
 **************************************************************/
 
-#ifndef BF548_FAMILY
+#ifndef CONFIG_BF54x
 void set_gpio_dir(unsigned, unsigned short);
 void set_gpio_inen(unsigned, unsigned short);
 void set_gpio_polar(unsigned, unsigned short);
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index a29f649e172..b0f847ae4bf 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -17,14 +17,14 @@
 /*
  * BF51x/BF52x/BF537: 8 timers:
  */
-#if defined(CONFIG_BF51x) || defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || defined(BF537_FAMILY)
 # define MAX_BLACKFIN_GPTIMERS 8
 # define TIMER0_GROUP_REG      TIMER_ENABLE
 #endif
 /*
  * BF54x: 11 timers (BF542: 8 timers):
  */
-#if defined(BF548_FAMILY)
+#if defined(CONFIG_BF54x)
 # ifdef CONFIG_BF542
 #  define MAX_BLACKFIN_GPTIMERS 8
 # else
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 51dac55c524..031ea3e2140 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -69,7 +69,7 @@ enum {
 static struct gpio_port_t * const gpio_array[] = {
 #if defined(BF533_FAMILY) || defined(BF538_FAMILY)
 	(struct gpio_port_t *) FIO_FLAG_D,
-#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
 	(struct gpio_port_t *) PORTFIO,
 	(struct gpio_port_t *) PORTGIO,
 	(struct gpio_port_t *) PORTHIO,
@@ -77,7 +77,7 @@ static struct gpio_port_t * const gpio_array[] = {
 	(struct gpio_port_t *) FIO0_FLAG_D,
 	(struct gpio_port_t *) FIO1_FLAG_D,
 	(struct gpio_port_t *) FIO2_FLAG_D,
-#elif defined(BF548_FAMILY)
+#elif defined(CONFIG_BF54x)
 	(struct gpio_port_t *)PORTA_FER,
 	(struct gpio_port_t *)PORTB_FER,
 	(struct gpio_port_t *)PORTC_FER,
@@ -93,7 +93,7 @@ static struct gpio_port_t * const gpio_array[] = {
 #endif
 };
 
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
 static unsigned short * const port_fer[] = {
 	(unsigned short *) PORTF_FER,
 	(unsigned short *) PORTG_FER,
@@ -109,11 +109,11 @@ static unsigned short * const port_mux[] = {
 
 static const
 u8 pmux_offset[][16] = {
-#  if defined(BF527_FAMILY)
+#  if defined(CONFIG_BF52x)
 	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
 	{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
 	{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
-#  elif defined(BF518_FAMILY)
+#  elif defined(CONFIG_BF51x)
 	{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
 	{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
 	{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
@@ -139,7 +139,7 @@ static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
 
 inline int check_gpio(unsigned gpio)
 {
-#if defined(BF548_FAMILY)
+#if defined(CONFIG_BF54x)
 	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
 	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
 	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
@@ -187,13 +187,13 @@ static void port_setup(unsigned gpio, unsigned short usage)
 	if (check_gpio(gpio))
 		return;
 
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
 	if (usage == GPIO_USAGE)
 		*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
 	else
 		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
 	SSYNC();
-#elif defined(BF548_FAMILY)
+#elif defined(CONFIG_BF54x)
 	if (usage == GPIO_USAGE)
 		gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
 	else
@@ -273,7 +273,7 @@ static void portmux_setup(unsigned short per)
 		}
 	}
 }
-#elif defined(BF548_FAMILY)
+#elif defined(CONFIG_BF54x)
 inline void portmux_setup(unsigned short per)
 {
 	u32 pmux;
@@ -297,7 +297,7 @@ inline u16 get_portmux(unsigned short per)
 
 	return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
 }
-#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
 inline void portmux_setup(unsigned short per)
 {
 	u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
@@ -322,7 +322,7 @@ static int __init bfin_gpio_init(void)
 arch_initcall(bfin_gpio_init);
 
 
-#ifndef BF548_FAMILY
+#ifndef CONFIG_BF54x
 /***********************************************************
 *
 * FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -489,7 +489,7 @@ static const unsigned int sic_iwr_irqs[] = {
 	IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
 #elif defined(BF538_FAMILY)
 	IRQ_PORTF_INTB
-#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
 	IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
 #elif defined(BF561_FAMILY)
 	IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
@@ -586,7 +586,7 @@ u32 bfin_pm_standby_setup(void)
 		gpio_array[bank]->maskb = 0;
 
 		if (mask) {
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
 			gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
@@ -631,7 +631,7 @@ void bfin_pm_standby_restore(void)
 		bank = gpio_bank(i);
 
 		if (mask) {
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
 			gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
@@ -657,9 +657,9 @@ void bfin_gpio_pm_hibernate_suspend(void)
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
 		bank = gpio_bank(i);
 
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
 		gpio_bank_saved[bank].fer = *port_fer[bank];
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
 		gpio_bank_saved[bank].mux = *port_mux[bank];
 #else
 		if (bank == 0)
@@ -685,8 +685,8 @@ void bfin_gpio_pm_hibernate_restore(void)
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
 		bank = gpio_bank(i);
 
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
+#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
 		*port_mux[bank] = gpio_bank_saved[bank].mux;
 #else
 		if (bank == 0)
@@ -710,7 +710,7 @@ void bfin_gpio_pm_hibernate_restore(void)
 
 
 #endif
-#else /* BF548_FAMILY */
+#else /* CONFIG_BF54x */
 #ifdef CONFIG_PM
 
 u32 bfin_pm_standby_setup(void)
@@ -762,7 +762,7 @@ unsigned short get_gpio_dir(unsigned gpio)
 }
 EXPORT_SYMBOL(get_gpio_dir);
 
-#endif /* BF548_FAMILY */
+#endif /* CONFIG_BF54x */
 
 /***********************************************************
 *
@@ -817,7 +817,7 @@ int peripheral_request(unsigned short per, const char *label)
 		 * be requested and used by several drivers
 		 */
 
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
 		if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
 #else
 		if (!(per & P_MAYSHARE)) {
@@ -964,7 +964,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
 		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
 	}
-#ifndef BF548_FAMILY
+#ifndef CONFIG_BF54x
 	else {	/* Reset POLAR setting when acquiring a gpio for the first time */
 		set_gpio_polar(gpio, 0);
 	}
@@ -1072,7 +1072,7 @@ void bfin_gpio_irq_free(unsigned gpio)
 
 static inline void __bfin_gpio_direction_input(unsigned gpio)
 {
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
 	gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
 #else
 	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
@@ -1100,13 +1100,13 @@ EXPORT_SYMBOL(bfin_gpio_direction_input);
 
 void bfin_gpio_irq_prepare(unsigned gpio)
 {
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
 	unsigned long flags;
 #endif
 
 	port_setup(gpio, GPIO_USAGE);
 
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
 	local_irq_save_hw(flags);
 	__bfin_gpio_direction_input(gpio);
 	local_irq_restore_hw(flags);
@@ -1135,7 +1135,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 
 	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
 	gpio_set_value(gpio, value);
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
 	gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
 #else
 	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
@@ -1150,7 +1150,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
 
 int bfin_gpio_get_value(unsigned gpio)
 {
-#ifdef BF548_FAMILY
+#ifdef CONFIG_BF54x
 	return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
 #else
 	unsigned long flags;
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index d1a2b9ca622..267bb7c8bfb 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -32,8 +32,6 @@
 #ifndef _MACH_BLACKFIN_H_
 #define _MACH_BLACKFIN_H_
 
-#define BF518_FAMILY
-
 #include "bf518.h"
 #include "mem_map.h"
 #include "defBF512.h"
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 297821e2d79..417abcd61f4 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -32,8 +32,6 @@
 #ifndef _MACH_BLACKFIN_H_
 #define _MACH_BLACKFIN_H_
 
-#define BF527_FAMILY
-
 #include "bf527.h"
 #include "mem_map.h"
 #include "defBF522.h"
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 0c0e3e2c3c2..cf6c1500222 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -32,8 +32,6 @@
 #ifndef _MACH_BLACKFIN_H_
 #define _MACH_BLACKFIN_H_
 
-#define BF548_FAMILY
-
 #include "bf548.h"
 #include "mem_map.h"
 #include "anomaly.h"
-- 
cgit v1.2.3


From 714e76d71d99f00734217e642ba64204df3bdf35 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sat, 28 Mar 2009 20:38:17 +0800
Subject: Blackfin arch: clean up sports header file

Remove redundancy of the name err_irq

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/bfin_sport.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index d4169590e75..b558908e1c7 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -126,7 +126,7 @@ struct sport_dev {
 	int tx_len;
 	int tx_sent;
 
-	int sport_err_irq;
+	int err_irq;
 
 	struct mutex mutex;	/* mutual exclusion semaphore */
 	struct task_struct *task;
-- 
cgit v1.2.3


From 2c8beb2cbef632a3683950aab8bcd9735a0a0270 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 28 Mar 2009 22:13:43 +0800
Subject: Blackfin arch: enable the platfrom PATA driver with CF Cards

Provide option to use the platfrom PATA driver with CF Cards
on the CF-IDE-NAND Add-On-Card in Common Memory Mode

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index cd04c5e4487..0afe9bd6dbc 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1120,8 +1120,11 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	IRQ_PF5
+#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
 
+#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
+#define PATA_INT	IRQ_PF5
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
 	.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
@@ -1144,6 +1147,24 @@ static struct resource bfin_pata_resources[] = {
 		.flags = IORESOURCE_IRQ,
 	},
 };
+#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 0,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20211820,
+		.end = 0x2021183F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2021181C,
+		.end = 0x2021181F,
+		.flags = IORESOURCE_MEM,
+	},
+};
+#endif
 
 static struct platform_device bfin_pata_device = {
 	.name = "pata_platform",
-- 
cgit v1.2.3


From 3ea57218fde5fe6c2ff449d4c30fc69ac6976096 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 28 Mar 2009 22:15:07 +0800
Subject: Blackfin arch: Privide BF537-STAMP platform data of ADP5520
 Multifunction driver

ADP5520 Multifunction LCD Backlight and Keypad Input Device Driver

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 142 ++++++++++++++++++++++++++++++++
 1 file changed, 142 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 0afe9bd6dbc..f32b7477dcb 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1073,6 +1073,141 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
 };
 #endif
 
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#include <linux/mfd/adp5520.h>
+
+	/*
+	 *  ADP5520/5501 Backlight Data
+	 */
+
+static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
+	.fade_in 		= FADE_T_1200ms,
+	.fade_out 		= FADE_T_1200ms,
+	.fade_led_law 		= BL_LAW_LINEAR,
+	.en_ambl_sens 		= 1,
+	.abml_filt 		= BL_AMBL_FILT_640ms,
+	.l1_daylight_max 	= BL_CUR_mA(15),
+	.l1_daylight_dim 	= BL_CUR_mA(0),
+	.l2_office_max 		= BL_CUR_mA(7),
+	.l2_office_dim 		= BL_CUR_mA(0),
+	.l3_dark_max 		= BL_CUR_mA(3),
+	.l3_dark_dim 		= BL_CUR_mA(0),
+	.l2_trip 		= L2_COMP_CURR_uA(700),
+	.l2_hyst 		= L2_COMP_CURR_uA(50),
+	.l3_trip 		= L3_COMP_CURR_uA(80),
+	.l3_hyst 		= L3_COMP_CURR_uA(20),
+};
+
+	/*
+	 *  ADP5520/5501 LEDs Data
+	 */
+
+#include <linux/leds.h>
+
+static struct led_info adp5520_leds[] = {
+	{
+		.name = "adp5520-led1",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
+	},
+#ifdef ADP5520_EN_ALL_LEDS
+	{
+		.name = "adp5520-led2",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
+	},
+	{
+		.name = "adp5520-led3",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
+	},
+#endif
+};
+
+static struct adp5520_leds_platfrom_data adp5520_leds_data = {
+	.num_leds = ARRAY_SIZE(adp5520_leds),
+	.leds = adp5520_leds,
+	.fade_in = FADE_T_600ms,
+	.fade_out = FADE_T_600ms,
+	.led_on_time = LED_ONT_600ms,
+};
+
+	/*
+	 *  ADP5520 GPIO Data
+	 */
+
+static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
+	.gpio_start = 50,
+	.gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+	.gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+};
+
+	/*
+	 *  ADP5520 Keypad Data
+	 */
+
+#include <linux/input.h>
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+	[KEY(0, 0)]	= KEY_GRAVE,
+	[KEY(0, 1)]	= KEY_1,
+	[KEY(0, 2)]	= KEY_2,
+	[KEY(0, 3)]	= KEY_3,
+	[KEY(1, 0)]	= KEY_4,
+	[KEY(1, 1)]	= KEY_5,
+	[KEY(1, 2)]	= KEY_6,
+	[KEY(1, 3)]	= KEY_7,
+	[KEY(2, 0)]	= KEY_8,
+	[KEY(2, 1)]	= KEY_9,
+	[KEY(2, 2)]	= KEY_0,
+	[KEY(2, 3)]	= KEY_MINUS,
+	[KEY(3, 0)]	= KEY_EQUAL,
+	[KEY(3, 1)]	= KEY_BACKSLASH,
+	[KEY(3, 2)]	= KEY_BACKSPACE,
+	[KEY(3, 3)]	= KEY_ENTER,
+};
+
+static struct adp5520_keys_platfrom_data adp5520_keys_data = {
+	.rows_en_mask	= ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
+	.cols_en_mask	= COL_C3 | COL_C2 | COL_C1 | COL_C0,
+	.keymap		= adp5520_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
+	.repeat		= 0,
+};
+
+	/*
+	 *  ADP5520/5501 Multifuction Device Init Data
+	 */
+
+static struct adp5520_subdev_info adp5520_subdevs[] = {
+	{
+		.name = "adp5520-backlight",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_backlight_data,
+	},
+	{
+		.name = "adp5520-led",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_leds_data,
+	},
+	{
+		.name = "adp5520-gpio",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_gpio_data,
+	},
+	{
+		.name = "adp5520-keys",
+		.id = ID_ADP5520,
+		.platform_data = &adp5520_keys_data,
+	},
+};
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+	.num_subdevs = ARRAY_SIZE(adp5520_subdevs),
+	.subdevs = adp5520_subdevs,
+};
+
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
@@ -1105,6 +1240,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adp5588_kpad_data,
 	},
 #endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+	{
+		I2C_BOARD_INFO("pmic-adp5520", 0x32),
+		.irq = IRQ_PF7,
+		.platform_data = (void *)&adp5520_pdev_data,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-- 
cgit v1.2.3


From b89df5042300bc08492a567f409c6899863ed8a3 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Sat, 28 Mar 2009 23:14:41 +0800
Subject: Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-common/pm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index f48a6aebb49..bce5a84be49 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -287,7 +287,7 @@ int bfin_pm_suspend_mem_enter(void)
 static int bfin_pm_valid(suspend_state_t state)
 {
 	return (state == PM_SUSPEND_STANDBY
-#ifndef BF533_FAMILY
+#if !(defined(BF533_FAMILY) || defined(CONFIG_BF561))
 	/*
 	 * On BF533/2/1:
 	 * If we enter Hibernate the SCKE Pin is driven Low,
-- 
cgit v1.2.3


From 1e9aa95526c3dfc50e55665c7129469a12593beb Mon Sep 17 00:00:00 2001
From: Cliff Cai <cliff.cai@analog.com>
Date: Sat, 28 Mar 2009 23:28:51 +0800
Subject: Blackfin arch: add sport-spi related resource stuff to board file

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 70 +++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index f32b7477dcb..0572926da23 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -843,6 +843,71 @@ static struct platform_device bfin_spi0_device = {
 };
 #endif  /* spi master and devices */
 
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+
+/* SPORT SPI controller data */
+static struct bfin5xx_spi_master bfin_sport_spi0_info = {
+	.num_chipselect = 1, /* master only supports one device */
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
+		P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
+};
+
+static struct resource bfin_sport_spi0_resource[] = {
+	[0] = {
+		.start = SPORT0_TCR1,
+		.end   = SPORT0_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT0_ERROR,
+		.end   = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi0_device = {
+	.name = "bfin-sport-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
+	.resource = bfin_sport_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi0_info, /* Passed to driver */
+	},
+};
+
+static struct bfin5xx_spi_master bfin_sport_spi1_info = {
+	.num_chipselect = 1, /* master only supports one device */
+	.enable_dma = 0,  /* master don't support DMA */
+	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
+		P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
+};
+
+static struct resource bfin_sport_spi1_resource[] = {
+	[0] = {
+		.start = SPORT1_TCR1,
+		.end   = SPORT1_TCR1 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = IRQ_SPORT1_ERROR,
+		.end   = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device bfin_sport_spi1_device = {
+	.name = "bfin-sport-spi",
+	.id = 2, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
+	.resource = bfin_sport_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_sport_spi1_info, /* Passed to driver */
+	},
+};
+
+#endif  /* sport spi master and devices */
+
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 static struct platform_device bfin_fb_device = {
 	.name = "bf537-lq035",
@@ -1395,6 +1460,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_spi0_device,
 #endif
 
+#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+	&bfin_sport_spi0_device,
+	&bfin_sport_spi1_device,
+#endif
+
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 	&bfin_fb_device,
 #endif
-- 
cgit v1.2.3


From 1eb19e30adeb05957b45204f0c04d94fc4662ffd Mon Sep 17 00:00:00 2001
From: Cliff Cai <cliff.cai@analog.com>
Date: Sat, 28 Mar 2009 23:31:43 +0800
Subject: Blackfin arch: sport spi needs 6 gpio pins

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/include/asm/bfin5xx_spi.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index 1306e6b2294..0292d58f936 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -110,7 +110,7 @@
 struct bfin5xx_spi_master {
 	u16 num_chipselect;
 	u8 enable_dma;
-	u16 pin_req[4];
+	u16 pin_req[7];
 };
 
 /* spi_board_info.controller_data for SPI slave devices,
-- 
cgit v1.2.3


From 4636b3019a76aacc5b01e14bd14cb468fb00940f Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Sun, 29 Mar 2009 00:47:31 +0800
Subject: Blackfin arch: add link-time asserts to make sure on-chip regions
 dont overflow

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/vmlinux.lds.S | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 4b4341da058..27952ae047d 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -183,6 +183,7 @@ SECTIONS
 		. = ALIGN(4);
 		__etext_l1 = .;
 	}
+	ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!")
 
 	.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
 	{
@@ -200,6 +201,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
+	ASSERT (SIZEOF(.data_a_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
 
 	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
 	{
@@ -214,6 +216,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
 	}
+	ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!")
 
 	__l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
 
@@ -239,6 +242,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_l2 = .;
 	}
+	ASSERT (SIZEOF(.text_data_l1) <= L2_LENGTH, "L2 overflow!")
 
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
-- 
cgit v1.2.3


From abd750a0fa731f9fd568526adb96d11322734167 Mon Sep 17 00:00:00 2001
From: Cliff Cai <cliff.cai@analog.com>
Date: Sun, 29 Mar 2009 01:03:20 +0800
Subject: Blackfin arch: add RSI's definitions to bf514 and bf516

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf518/include/mach/cdefBF514.h |  67 +++++++++++
 arch/blackfin/mach-bf518/include/mach/cdefBF516.h |  67 +++++++++++
 arch/blackfin/mach-bf518/include/mach/defBF514.h  | 135 ++++++++++++++++++++++
 arch/blackfin/mach-bf518/include/mach/defBF516.h  | 135 ++++++++++++++++++++++
 4 files changed, 404 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
index 9521e178fb2..dfe492dfe54 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
@@ -45,4 +45,71 @@
 
 /* The following are the #defines needed by ADSP-BF514 that are not in the common header */
 
+/* Removable Storage Interface Registers */
+
+#define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
+#define bfin_write_RSI_PWR_CTL(val)    bfin_write16(RSI_PWR_CONTROL, val)
+#define bfin_read_RSI_CLK_CTL()	       bfin_read16(RSI_CLK_CONTROL)
+#define bfin_write_RSI_CLK_CTL(val)    bfin_write16(RSI_CLK_CONTROL, val)
+#define bfin_read_RSI_ARGUMENT()       bfin_read32(RSI_ARGUMENT)
+#define bfin_write_RSI_ARGUMENT(val)   bfin_write32(RSI_ARGUMENT, val)
+#define bfin_read_RSI_COMMAND()        bfin_read16(RSI_COMMAND)
+#define bfin_write_RSI_COMMAND(val)    bfin_write16(RSI_COMMAND, val)
+#define bfin_read_RSI_RESP_CMD()       bfin_read16(RSI_RESP_CMD)
+#define bfin_write_RSI_RESP_CMD(val)   bfin_write16(RSI_RESP_CMD, val)
+#define bfin_read_RSI_RESPONSE0()      bfin_read32(RSI_RESPONSE0)
+#define bfin_write_RSI_RESPONSE0(val)  bfin_write32(RSI_RESPONSE0, val)
+#define bfin_read_RSI_RESPONSE1()      bfin_read32(RSI_RESPONSE1)
+#define bfin_write_RSI_RESPONSE1(val)  bfin_write32(RSI_RESPONSE1, val)
+#define bfin_read_RSI_RESPONSE2()      bfin_read32(RSI_RESPONSE2)
+#define bfin_write_RSI_RESPONSE2(val)  bfin_write32(RSI_RESPONSE2, val)
+#define bfin_read_RSI_RESPONSE3()      bfin_read32(RSI_RESPONSE3)
+#define bfin_write_RSI_RESPONSE3(val)  bfin_write32(RSI_RESPONSE3, val)
+#define bfin_read_RSI_DATA_TIMER()     bfin_read32(RSI_DATA_TIMER)
+#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
+#define bfin_read_RSI_DATA_LGTH()      bfin_read16(RSI_DATA_LGTH)
+#define bfin_write_RSI_DATA_LGTH(val)  bfin_write16(RSI_DATA_LGTH, val)
+#define bfin_read_RSI_DATA_CTL()       bfin_read16(RSI_DATA_CONTROL)
+#define bfin_write_RSI_DATA_CTL(val)   bfin_write16(RSI_DATA_CONTROL, val)
+#define bfin_read_RSI_DATA_CNT()       bfin_read16(RSI_DATA_CNT)
+#define bfin_write_RSI_DATA_CNT(val)   bfin_write16(RSI_DATA_CNT, val)
+#define bfin_read_RSI_STATUS()         bfin_read32(RSI_STATUS)
+#define bfin_write_RSI_STATUS(val)     bfin_write32(RSI_STATUS, val)
+#define bfin_read_RSI_STATUS_CLR()     bfin_read16(RSI_STATUSCL)
+#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
+#define bfin_read_RSI_MASK0()          bfin_read32(RSI_MASK0)
+#define bfin_write_RSI_MASK0(val)      bfin_write32(RSI_MASK0, val)
+#define bfin_read_RSI_MASK1()          bfin_read32(RSI_MASK1)
+#define bfin_write_RSI_MASK1(val)      bfin_write32(RSI_MASK1, val)
+#define bfin_read_RSI_FIFO_CNT()       bfin_read16(RSI_FIFO_CNT)
+#define bfin_write_RSI_FIFO_CNT(val)   bfin_write16(RSI_FIFO_CNT, val)
+#define bfin_read_RSI_CEATA_CTL()      bfin_read16(RSI_CEATA_CONTROL)
+#define bfin_write_RSI_CEATA_CTL(val)  bfin_write16(RSI_CEATA_CONTROL, val)
+#define bfin_read_RSI_FIFO()           bfin_read32(RSI_FIFO)
+#define bfin_write_RSI_FIFO(val)       bfin_write32(RSI_FIFO, val)
+#define bfin_read_RSI_E_STATUS()       bfin_read16(RSI_ESTAT)
+#define bfin_write_RSI_E_STATUS(val)   bfin_write16(RSI_ESTAT, val)
+#define bfin_read_RSI_E_MASK()         bfin_read16(RSI_EMASK)
+#define bfin_write_RSI_E_MASK(val)     bfin_write16(RSI_EMASK, val)
+#define bfin_read_RSI_CFG()            bfin_read16(RSI_CONFIG)
+#define bfin_write_RSI_CFG(val)        bfin_write16(RSI_CONFIG, val)
+#define bfin_read_RSI_RD_WAIT_EN()     bfin_read16(RSI_RD_WAIT_EN)
+#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
+#define bfin_read_RSI_PID0()           bfin_read16(RSI_PID0)
+#define bfin_write_RSI_PID0(val)       bfin_write16(RSI_PID0, val)
+#define bfin_read_RSI_PID1()           bfin_read16(RSI_PID1)
+#define bfin_write_RSI_PID1(val)       bfin_write16(RSI_PID1, val)
+#define bfin_read_RSI_PID2()           bfin_read16(RSI_PID2)
+#define bfin_write_RSI_PID2(val)       bfin_write16(RSI_PID2, val)
+#define bfin_read_RSI_PID3()           bfin_read16(RSI_PID3)
+#define bfin_write_RSI_PID3(val)       bfin_write16(RSI_PID3, val)
+#define bfin_read_RSI_PID4()           bfin_read16(RSI_PID4)
+#define bfin_write_RSI_PID4(val)       bfin_write16(RSI_PID4, val)
+#define bfin_read_RSI_PID5()           bfin_read16(RSI_PID5)
+#define bfin_write_RSI_PID5(val)       bfin_write16(RSI_PID5, val)
+#define bfin_read_RSI_PID6()           bfin_read16(RSI_PID6)
+#define bfin_write_RSI_PID6(val)       bfin_write16(RSI_PID6, val)
+#define bfin_read_RSI_PID7()           bfin_read16(RSI_PID7)
+#define bfin_write_RSI_PID7(val)       bfin_write16(RSI_PID7, val)
+
 #endif /* _CDEF_BF514_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
index 4e26ccfcef9..14df43d4677 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
@@ -210,4 +210,71 @@
 #define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
 #define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
 
+/* Removable Storage Interface Registers */
+
+#define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
+#define bfin_write_RSI_PWR_CTL(val)    bfin_write16(RSI_PWR_CONTROL, val)
+#define bfin_read_RSI_CLK_CTL()	       bfin_read16(RSI_CLK_CONTROL)
+#define bfin_write_RSI_CLK_CTL(val)    bfin_write16(RSI_CLK_CONTROL, val)
+#define bfin_read_RSI_ARGUMENT()       bfin_read32(RSI_ARGUMENT)
+#define bfin_write_RSI_ARGUMENT(val)   bfin_write32(RSI_ARGUMENT, val)
+#define bfin_read_RSI_COMMAND()        bfin_read16(RSI_COMMAND)
+#define bfin_write_RSI_COMMAND(val)    bfin_write16(RSI_COMMAND, val)
+#define bfin_read_RSI_RESP_CMD()       bfin_read16(RSI_RESP_CMD)
+#define bfin_write_RSI_RESP_CMD(val)   bfin_write16(RSI_RESP_CMD, val)
+#define bfin_read_RSI_RESPONSE0()      bfin_read32(RSI_RESPONSE0)
+#define bfin_write_RSI_RESPONSE0(val)  bfin_write32(RSI_RESPONSE0, val)
+#define bfin_read_RSI_RESPONSE1()      bfin_read32(RSI_RESPONSE1)
+#define bfin_write_RSI_RESPONSE1(val)  bfin_write32(RSI_RESPONSE1, val)
+#define bfin_read_RSI_RESPONSE2()      bfin_read32(RSI_RESPONSE2)
+#define bfin_write_RSI_RESPONSE2(val)  bfin_write32(RSI_RESPONSE2, val)
+#define bfin_read_RSI_RESPONSE3()      bfin_read32(RSI_RESPONSE3)
+#define bfin_write_RSI_RESPONSE3(val)  bfin_write32(RSI_RESPONSE3, val)
+#define bfin_read_RSI_DATA_TIMER()     bfin_read32(RSI_DATA_TIMER)
+#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
+#define bfin_read_RSI_DATA_LGTH()      bfin_read16(RSI_DATA_LGTH)
+#define bfin_write_RSI_DATA_LGTH(val)  bfin_write16(RSI_DATA_LGTH, val)
+#define bfin_read_RSI_DATA_CTL()       bfin_read16(RSI_DATA_CONTROL)
+#define bfin_write_RSI_DATA_CTL(val)   bfin_write16(RSI_DATA_CONTROL, val)
+#define bfin_read_RSI_DATA_CNT()       bfin_read16(RSI_DATA_CNT)
+#define bfin_write_RSI_DATA_CNT(val)   bfin_write16(RSI_DATA_CNT, val)
+#define bfin_read_RSI_STATUS()         bfin_read32(RSI_STATUS)
+#define bfin_write_RSI_STATUS(val)     bfin_write32(RSI_STATUS, val)
+#define bfin_read_RSI_STATUS_CLR()     bfin_read16(RSI_STATUSCL)
+#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
+#define bfin_read_RSI_MASK0()          bfin_read32(RSI_MASK0)
+#define bfin_write_RSI_MASK0(val)      bfin_write32(RSI_MASK0, val)
+#define bfin_read_RSI_MASK1()          bfin_read32(RSI_MASK1)
+#define bfin_write_RSI_MASK1(val)      bfin_write32(RSI_MASK1, val)
+#define bfin_read_RSI_FIFO_CNT()       bfin_read16(RSI_FIFO_CNT)
+#define bfin_write_RSI_FIFO_CNT(val)   bfin_write16(RSI_FIFO_CNT, val)
+#define bfin_read_RSI_CEATA_CTL()      bfin_read16(RSI_CEATA_CONTROL)
+#define bfin_write_RSI_CEATA_CTL(val)  bfin_write16(RSI_CEATA_CONTROL, val)
+#define bfin_read_RSI_FIFO()           bfin_read32(RSI_FIFO)
+#define bfin_write_RSI_FIFO(val)       bfin_write32(RSI_FIFO, val)
+#define bfin_read_RSI_E_STATUS()       bfin_read16(RSI_ESTAT)
+#define bfin_write_RSI_E_STATUS(val)   bfin_write16(RSI_ESTAT, val)
+#define bfin_read_RSI_E_MASK()         bfin_read16(RSI_EMASK)
+#define bfin_write_RSI_E_MASK(val)     bfin_write16(RSI_EMASK, val)
+#define bfin_read_RSI_CFG()            bfin_read16(RSI_CONFIG)
+#define bfin_write_RSI_CFG(val)        bfin_write16(RSI_CONFIG, val)
+#define bfin_read_RSI_RD_WAIT_EN()     bfin_read16(RSI_RD_WAIT_EN)
+#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
+#define bfin_read_RSI_PID0()           bfin_read16(RSI_PID0)
+#define bfin_write_RSI_PID0(val)       bfin_write16(RSI_PID0, val)
+#define bfin_read_RSI_PID1()           bfin_read16(RSI_PID1)
+#define bfin_write_RSI_PID1(val)       bfin_write16(RSI_PID1, val)
+#define bfin_read_RSI_PID2()           bfin_read16(RSI_PID2)
+#define bfin_write_RSI_PID2(val)       bfin_write16(RSI_PID2, val)
+#define bfin_read_RSI_PID3()           bfin_read16(RSI_PID3)
+#define bfin_write_RSI_PID3(val)       bfin_write16(RSI_PID3, val)
+#define bfin_read_RSI_PID4()           bfin_read16(RSI_PID4)
+#define bfin_write_RSI_PID4(val)       bfin_write16(RSI_PID4, val)
+#define bfin_read_RSI_PID5()           bfin_read16(RSI_PID5)
+#define bfin_write_RSI_PID5(val)       bfin_write16(RSI_PID5, val)
+#define bfin_read_RSI_PID6()           bfin_read16(RSI_PID6)
+#define bfin_write_RSI_PID6(val)       bfin_write16(RSI_PID6, val)
+#define bfin_read_RSI_PID7()           bfin_read16(RSI_PID7)
+#define bfin_write_RSI_PID7(val)       bfin_write16(RSI_PID7, val)
+
 #endif /* _CDEF_BF516_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 543f2913b3f..56ee5a7c200 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -110,4 +110,139 @@
 #define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
 #define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
 
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
 #endif /* _DEF_BF514_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h
index 149a269306c..dfc93843517 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h
@@ -487,4 +487,139 @@
 #define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
 #define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
 
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
 #endif /* _DEF_BF516_H */
-- 
cgit v1.2.3


From d6879c585b7f8c2f3eb2f7e7beac806af4e9755c Mon Sep 17 00:00:00 2001
From: Robin Getz <rgetz@blackfin.uclinux.org>
Date: Sun, 29 Mar 2009 01:10:30 +0800
Subject: Blackfin arch: be less noisy when gets a gpio conflict after kernel
 has booted

Once the kernel has booted - be less noisy when someone does a modprobe
(and gets a gpio conflict).

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/kernel/bfin_gpio.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 031ea3e2140..a0678da4053 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -802,7 +802,8 @@ int peripheral_request(unsigned short per, const char *label)
 	 */
 	if (unlikely(!check_gpio(ident) &&
 	    reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		printk(KERN_ERR
 		       "%s: Peripheral %d is already reserved as GPIO by %s !\n",
 		       __func__, ident, get_label(ident));
@@ -830,7 +831,8 @@ int peripheral_request(unsigned short per, const char *label)
 			if (cmp_label(ident, label) == 0)
 				goto anyway;
 
-			dump_stack();
+			if (system_state == SYSTEM_BOOTING)
+				dump_stack();
 			printk(KERN_ERR
 			       "%s: Peripheral %d function %d is already reserved by %s !\n",
 			       __func__, ident, P_FUNCT2MUX(per), get_label(ident));
@@ -946,14 +948,16 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	}
 
 	if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
 		       gpio, get_label(gpio));
 		local_irq_restore_hw(flags);
 		return -EBUSY;
 	}
 	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
 		       gpio, get_label(gpio));
@@ -993,7 +997,8 @@ void bfin_gpio_free(unsigned gpio)
 	local_irq_save_hw(flags);
 
 	if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		gpio_error(gpio);
 		local_irq_restore_hw(flags);
 		return;
@@ -1017,7 +1022,8 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 	local_irq_save_hw(flags);
 
 	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n",
 		       gpio);
@@ -1025,7 +1031,8 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 		return -EBUSY;
 	}
 	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
 		       gpio, get_label(gpio));
@@ -1057,7 +1064,8 @@ void bfin_gpio_irq_free(unsigned gpio)
 	local_irq_save_hw(flags);
 
 	if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
-		dump_stack();
+		if (system_state == SYSTEM_BOOTING)
+			dump_stack();
 		gpio_error(gpio);
 		local_irq_restore_hw(flags);
 		return;
-- 
cgit v1.2.3


From 9e495834e59ca9b29f1a1f63b9f5533bb022ac49 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Sat, 28 Mar 2009 18:53:31 +0100
Subject: [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx

OMAP34XX_MAILBOX_BASE must be defined both for 24xx and 34xx.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/include/mach/omap34xx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index 1b1c35d2169..ab640151d3e 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -81,6 +81,7 @@
 #define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
 #define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
 
+#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
 #if defined(CONFIG_ARCH_OMAP3430)
 
@@ -88,7 +89,6 @@
 #define OMAP2_CM_BASE			OMAP3430_CM_BASE
 #define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
 #define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
 #endif
 
-- 
cgit v1.2.3


From f0bba9f934517533acbda7329be93f55d5a01c03 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 28 Mar 2009 19:18:05 +0100
Subject: [ARM] 5435/1: fix compile warning in sanity_check_meminfo()

Compiling recent 2.6.29-rc kernels for ARM gives me the following warning:

arch/arm/mm/mmu.c: In function 'sanity_check_meminfo':
arch/arm/mm/mmu.c:697: warning: comparison between pointer and integer

This is because commit 3fd9825c42c784a59b3b90bdf073f49d4bb42a8d
"[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()"
in 2.6.29-rc5-git4 added a comparison of a pointer with PAGE_OFFSET,
which is an integer.

Fixed by casting PAGE_OFFSET to void *.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index d4d082c5c2d..5a89e57e342 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -694,7 +694,7 @@ static void __init sanity_check_meminfo(void)
 		 * the vmalloc area.
 		 */
 		if (__va(bank->start) >= VMALLOC_MIN ||
-		    __va(bank->start) < PAGE_OFFSET) {
+		    __va(bank->start) < (void *)PAGE_OFFSET) {
 			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
 			       "(vmalloc region overlap).\n",
 			       bank->start, bank->start + bank->size - 1);
-- 
cgit v1.2.3


From 8e99ada8deaa9033600cd2c7d0a9366b0e99ab68 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Sat, 28 Mar 2009 21:34:45 +0100
Subject: i2c-algo-pca: Rework waiting for a free bus

Waiting for a free bus now accepts the timeout value in jiffies and does
proper checking using time_before.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 arch/sh/boards/board-sh7785lcr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 94c0296bc35..6f94f17adc4 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -229,7 +229,7 @@ static struct resource i2c_resources[] = {
 static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
 	.gpio			= 0,
 	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
-	.timeout		= 100,
+	.timeout		= HZ,
 };
 
 static struct platform_device i2c_device = {
-- 
cgit v1.2.3