From bbd0abda9cc689a54df509aae00000bbb2a1a7d1 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 26 Oct 2005 21:45:56 +1000 Subject: powerpc: Merge 32-bit CHRP support. SMP still needs more work but UP gets as far as starting userspace at least. This uses the 64-bit-style code for spinning up the cpus. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/head_32.S | 9 +- arch/powerpc/kernel/prom_init.c | 54 ++- arch/powerpc/kernel/setup_32.c | 4 + arch/powerpc/platforms/Makefile | 1 + arch/powerpc/platforms/chrp/Makefile | 3 + arch/powerpc/platforms/chrp/pci.c | 310 ++++++++++++++++++ arch/powerpc/platforms/chrp/pegasos_eth.c | 101 ++++++ arch/powerpc/platforms/chrp/setup.c | 523 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/chrp/smp.c | 94 ++++++ arch/powerpc/platforms/chrp/time.c | 188 +++++++++++ arch/powerpc/platforms/powermac/pic.c | 4 - 12 files changed, 1256 insertions(+), 37 deletions(-) create mode 100644 arch/powerpc/platforms/chrp/Makefile create mode 100644 arch/powerpc/platforms/chrp/pci.c create mode 100644 arch/powerpc/platforms/chrp/pegasos_eth.c create mode 100644 arch/powerpc/platforms/chrp/setup.c create mode 100644 arch/powerpc/platforms/chrp/smp.c create mode 100644 arch/powerpc/platforms/chrp/time.c (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 964ded4a757..9589d621edc 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -339,7 +339,7 @@ config U3_DART default n config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE + depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP bool default y diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index cd51fe585fc..f8673f7b2b2 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -207,7 +207,7 @@ turn_on_mmu: .globl __secondary_hold __secondary_hold: /* tell the master we're here */ - stw r3,4(0) + stw r3,__secondary_hold_acknowledge@l(0) #ifdef CONFIG_SMP 100: lwz r4,0(0) /* wait until we're told to start */ @@ -220,6 +220,13 @@ __secondary_hold: b . #endif /* CONFIG_SMP */ + .globl __secondary_hold_spinloop +__secondary_hold_spinloop: + .long 0 + .globl __secondary_hold_acknowledge +__secondary_hold_acknowledge: + .long -1 + /* * Exception entry code. This code runs with address translation * turned off, i.e. using physical addresses. diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 18d266d8935..debe9734636 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1155,9 +1155,18 @@ static void __init prom_initialize_tce_table(void) * * -- Cort */ +extern void __secondary_hold(void); +extern unsigned long __secondary_hold_spinloop; +extern unsigned long __secondary_hold_acknowledge; + +/* + * We want to reference the copy of __secondary_hold_* in the + * 0 - 0x100 address range + */ +#define LOW_ADDR(x) (((unsigned long) &(x)) & 0xff) + static void __init prom_hold_cpus(void) { -#ifdef CONFIG_PPC64 unsigned long i; unsigned int reg; phandle node; @@ -1166,20 +1175,18 @@ static void __init prom_hold_cpus(void) unsigned int interrupt_server[MAX_CPU_THREADS]; unsigned int cpu_threads, hw_cpu_num; int propsize; - extern void __secondary_hold(void); - extern unsigned long __secondary_hold_spinloop; - extern unsigned long __secondary_hold_acknowledge; + struct prom_t *_prom = &RELOC(prom); unsigned long *spinloop - = (void *) __pa(&__secondary_hold_spinloop); + = (void *) LOW_ADDR(__secondary_hold_spinloop); unsigned long *acknowledge - = (void *) __pa(&__secondary_hold_acknowledge); + = (void *) LOW_ADDR(__secondary_hold_acknowledge); #ifdef CONFIG_PPC64 + /* __secondary_hold is actually a descriptor, not the text address */ unsigned long secondary_hold = __pa(*PTRRELOC((unsigned long *)__secondary_hold)); #else - unsigned long secondary_hold = __pa(&__secondary_hold); + unsigned long secondary_hold = LOW_ADDR(__secondary_hold); #endif - struct prom_t *_prom = &RELOC(prom); prom_debug("prom_hold_cpus: start...\n"); prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop); @@ -1197,9 +1204,8 @@ static void __init prom_hold_cpus(void) *spinloop = 0; #ifdef CONFIG_HMT - for (i = 0; i < NR_CPUS; i++) { + for (i = 0; i < NR_CPUS; i++) RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; - } #endif /* look for cpus */ for (node = 0; prom_next_node(&node); ) { @@ -1250,34 +1256,22 @@ static void __init prom_hold_cpus(void) call_prom("start-cpu", 3, 0, node, secondary_hold, reg); - for ( i = 0 ; (i < 100000000) && - (*acknowledge == ((unsigned long)-1)); i++ ) + for (i = 0; (i < 100000000) && + (*acknowledge == ((unsigned long)-1)); i++ ) mb(); - if (*acknowledge == reg) { + if (*acknowledge == reg) prom_printf("done\n"); - /* We have to get every CPU out of OF, - * even if we never start it. */ - if (cpuid >= NR_CPUS) - goto next; - } else { + else prom_printf("failed: %x\n", *acknowledge); - } } #ifdef CONFIG_SMP else prom_printf("%x : boot cpu %x\n", cpuid, reg); -#endif -next: -#ifdef CONFIG_SMP - /* Init paca for secondary threads. They start later. */ - for (i=1; i < cpu_threads; i++) { - cpuid++; - if (cpuid >= NR_CPUS) - continue; - } #endif /* CONFIG_SMP */ - cpuid++; + + /* Reserve cpu #s for secondary threads. They start later. */ + cpuid += cpu_threads; } #ifdef CONFIG_HMT /* Only enable HMT on processors that provide support. */ @@ -1311,7 +1305,6 @@ next: ") exceeded: ignoring extras\n"); prom_debug("prom_hold_cpus: end...\n"); -#endif } @@ -1940,7 +1933,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long r6, unsigned long r7) { struct prom_t *_prom; - extern char _stext[]; unsigned long hdr; u32 getprop_rval; unsigned long offset = reloc_offset(); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 295d5c77f02..0cac112ca89 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -56,6 +56,10 @@ extern void power4_idle(void); boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; +/* XXX should go elsewhere */ +int __irq_offset_value; +EXPORT_SYMBOL(__irq_offset_value); + /* Used with the BI_MEMSIZE bootinfo parameter to store the memory size value reported by the boot loader. */ unsigned long boot_mem_size; diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 509622da540..01723d491b5 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,6 +5,7 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif +obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ diff --git a/arch/powerpc/platforms/chrp/Makefile b/arch/powerpc/platforms/chrp/Makefile new file mode 100644 index 00000000000..1fde4e68414 --- /dev/null +++ b/arch/powerpc/platforms/chrp/Makefile @@ -0,0 +1,3 @@ +obj-y += setup.o time.o pegasos_eth.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c new file mode 100644 index 00000000000..82c429d487f --- /dev/null +++ b/arch/powerpc/platforms/chrp/pci.c @@ -0,0 +1,310 @@ +/* + * CHRP pci routines. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* LongTrail */ +void __iomem *gg2_pci_config_base; + +/* + * The VLSI Golden Gate II has only 512K of PCI configuration space, so we + * limit the bus number to 3 bits + */ + +int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, + int len, u32 *val) +{ + volatile void __iomem *cfg_data; + struct pci_controller *hose = bus->sysdata; + + if (bus->number > 7) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that off is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); + switch (len) { + case 1: + *val = in_8(cfg_data); + break; + case 2: + *val = in_le16(cfg_data); + break; + default: + *val = in_le32(cfg_data); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, + int len, u32 val) +{ + volatile void __iomem *cfg_data; + struct pci_controller *hose = bus->sysdata; + + if (bus->number > 7) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that off is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); + switch (len) { + case 1: + out_8(cfg_data, val); + break; + case 2: + out_le16(cfg_data, val); + break; + default: + out_le32(cfg_data, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops gg2_pci_ops = +{ + gg2_read_config, + gg2_write_config +}; + +/* + * Access functions for PCI config space using RTAS calls. + */ +int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; +} + +int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = +{ + rtas_read_config, + rtas_write_config +}; + +volatile struct Hydra __iomem *Hydra = NULL; + +int __init +hydra_init(void) +{ + struct device_node *np; + + np = find_devices("mac-io"); + if (np == NULL || np->n_addrs == 0) + return 0; + Hydra = ioremap(np->addrs[0].address, np->addrs[0].size); + printk("Hydra Mac I/O at %lx\n", np->addrs[0].address); + printk("Hydra Feature_Control was %x", + in_le32(&Hydra->Feature_Control)); + out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | + HYDRA_FC_SCSI_CELL_EN | + HYDRA_FC_SCCA_ENABLE | + HYDRA_FC_SCCB_ENABLE | + HYDRA_FC_ARB_BYPASS | + HYDRA_FC_MPIC_ENABLE | + HYDRA_FC_SLOW_SCC_PCLK | + HYDRA_FC_MPIC_IS_MASTER)); + printk(", now %x\n", in_le32(&Hydra->Feature_Control)); + return 1; +} + +void __init +chrp_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + struct device_node *np; + + /* PCI interrupts are controlled by the OpenPIC */ + for_each_pci_dev(dev) { + np = pci_device_to_OF_node(dev); + if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) + dev->irq = np->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +#define PRG_CL_RESET_VALID 0x00010000 + +static void __init +setup_python(struct pci_controller *hose, struct device_node *dev) +{ + u32 __iomem *reg; + u32 val; + unsigned long addr = dev->addrs[0].address; + + setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010); + + /* Clear the magic go-slow bit */ + reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40); + val = in_be32(®[12]); + if (val & PRG_CL_RESET_VALID) { + out_be32(®[12], val & ~PRG_CL_RESET_VALID); + in_be32(®[12]); + } + iounmap(reg); +} + +/* Marvell Discovery II based Pegasos 2 */ +static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) +{ + struct device_node *root = find_path_device("/"); + struct device_node *rtas; + + rtas = of_find_node_by_name (root, "rtas"); + if (rtas) { + hose->ops = &rtas_pci_ops; + } else { + printk ("RTAS supporting Pegasos OF not found, please upgrade" + " your firmware\n"); + } + pci_assign_all_buses = 1; +} + +void __init +chrp_find_bridges(void) +{ + struct device_node *dev; + int *bus_range; + int len, index = -1; + struct pci_controller *hose; + unsigned int *dma; + char *model, *machine; + int is_longtrail = 0, is_mot = 0, is_pegasos = 0; + struct device_node *root = find_path_device("/"); + + /* + * The PCI host bridge nodes on some machines don't have + * properties to adequately identify them, so we have to + * look at what sort of machine this is as well. + */ + machine = get_property(root, "model", NULL); + if (machine != NULL) { + is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; + is_mot = strncmp(machine, "MOT", 3) == 0; + if (strncmp(machine, "Pegasos2", 8) == 0) + is_pegasos = 2; + else if (strncmp(machine, "Pegasos", 7) == 0) + is_pegasos = 1; + } + for (dev = root->child; dev != NULL; dev = dev->sibling) { + if (dev->type == NULL || strcmp(dev->type, "pci") != 0) + continue; + ++index; + /* The GG2 bridge on the LongTrail doesn't have an address */ + if (dev->n_addrs < 1 && !is_longtrail) { + printk(KERN_WARNING "Can't use %s: no address\n", + dev->full_name); + continue; + } + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + dev->full_name); + continue; + } + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO "PCI bus %d", bus_range[0]); + else + printk(KERN_INFO "PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s", dev->type); + if (dev->n_addrs > 0) + printk(" at %lx", dev->addrs[0].address); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk("Can't allocate PCI controller structure for %s\n", + dev->full_name); + continue; + } + hose->arch_data = dev; + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + + model = get_property(dev, "model", NULL); + if (model == NULL) + model = ""; + if (device_is_compatible(dev, "IBM,python")) { + setup_python(hose, dev); + } else if (is_mot + || strncmp(model, "Motorola, Grackle", 17) == 0) { + setup_grackle(hose); + } else if (is_longtrail) { + void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); + hose->ops = &gg2_pci_ops; + hose->cfg_data = p; + gg2_pci_config_base = p; + } else if (is_pegasos == 1) { + setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); + } else if (is_pegasos == 2) { + setup_peg2(hose, dev); + } else { + printk("No methods for %s (model %s), using RTAS\n", + dev->full_name, model); + hose->ops = &rtas_pci_ops; + } + + pci_process_bridge_OF_ranges(hose, dev, index == 0); + + /* check the first bridge for a property that we can + use to set pci_dram_offset */ + dma = (unsigned int *) + get_property(dev, "ibm,dma-ranges", &len); + if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { + pci_dram_offset = dma[2] - dma[3]; + printk("pci_dram_offset = %lx\n", pci_dram_offset); + } + } + + /* Do not fixup interrupts from OF tree on pegasos */ + if (is_pegasos == 0) + ppc_md.pcibios_fixup = chrp_pcibios_fixup; +} diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c new file mode 100644 index 00000000000..cad5bfa153b --- /dev/null +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -0,0 +1,101 @@ +/* + * arch/ppc/platforms/chrp_pegasos_eth.c + * + * Copyright (C) 2005 Sven Luther + * Thanks to : + * Dale Farnsworth + * Mark A. Greer + * Nicolas DET + * Benjamin Herrenschmidt + * And anyone else who helped me on this. + */ + +#include +#include +#include +#include +#include +#include + +/* Pegasos 2 specific Marvell MV 64361 gigabit ethernet port setup */ +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +static struct resource mv643xx_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = 9, + .end = 9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv643xx_eth_platform_data eth0_pd; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), + .resource = mv643xx_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; + +static struct resource mv643xx_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = 9, + .end = 9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv643xx_eth_platform_data eth1_pd; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), + .resource = mv643xx_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, + ð0_device, + ð1_device, +}; + + +int +mv643xx_eth_add_pds(void) +{ + int ret = 0; + static struct pci_device_id pci_marvell_mv64360[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) }, + { } + }; + + if (pci_dev_present(pci_marvell_mv64360)) { + ret = platform_add_devices(mv643xx_eth_pd_devs, ARRAY_SIZE(mv643xx_eth_pd_devs)); + } + return ret; +} +device_initcall(mv643xx_eth_add_pds); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c new file mode 100644 index 00000000000..5145990e6a0 --- /dev/null +++ b/arch/powerpc/platforms/chrp/setup.c @@ -0,0 +1,523 @@ +/* + * arch/ppc/platforms/setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + */ + +/* + * bootup setup stuff.. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void chrp_get_rtc_time(struct rtc_time *); +int chrp_set_rtc_time(struct rtc_time *); +void chrp_calibrate_decr(void); +long chrp_time_init(void); + +void chrp_find_bridges(void); +void chrp_event_scan(void); +void rtas_indicator_progress(char *, unsigned short); +void btext_progress(char *, unsigned short); + +int _chrp_type; +EXPORT_SYMBOL(_chrp_type); + +struct mpic *chrp_mpic; + +/* + * XXX this should be in xmon.h, but putting it there means xmon.h + * has to include (to get irqreturn_t), which + * causes all sorts of problems. -- paulus + */ +extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); + +extern unsigned long loops_per_jiffy; + +#ifdef CONFIG_SMP +extern struct smp_ops_t chrp_smp_ops; +#endif + +static const char *gg2_memtypes[4] = { + "FPM", "SDRAM", "EDO", "BEDO" +}; +static const char *gg2_cachesizes[4] = { + "256 KB", "512 KB", "1 MB", "Reserved" +}; +static const char *gg2_cachetypes[4] = { + "Asynchronous", "Reserved", "Flow-Through Synchronous", + "Pipelined Synchronous" +}; +static const char *gg2_cachemodes[4] = { + "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" +}; + +void chrp_show_cpuinfo(struct seq_file *m) +{ + int i, sdramen; + unsigned int t; + struct device_node *root; + const char *model = ""; + + root = find_path_device("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + + /* longtrail (goldengate) stuff */ + if (!strncmp(model, "IBM,LongTrail", 13)) { + /* VLSI VAS96011/12 `Golden Gate 2' */ + /* Memory banks */ + sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) + >>31) & 1; + for (i = 0; i < (sdramen ? 4 : 6); i++) { + t = in_le32(gg2_pci_config_base+ + GG2_PCI_DRAM_BANK0+ + i*4); + if (!(t & 1)) + continue; + switch ((t>>8) & 0x1f) { + case 0x1f: + model = "4 MB"; + break; + case 0x1e: + model = "8 MB"; + break; + case 0x1c: + model = "16 MB"; + break; + case 0x18: + model = "32 MB"; + break; + case 0x10: + model = "64 MB"; + break; + case 0x00: + model = "128 MB"; + break; + default: + model = "Reserved"; + break; + } + seq_printf(m, "memory bank %d\t: %s %s\n", i, model, + gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); + } + /* L2 cache */ + t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); + seq_printf(m, "board l2\t: %s %s (%s)\n", + gg2_cachesizes[(t>>7) & 3], + gg2_cachetypes[(t>>2) & 3], + gg2_cachemodes[t & 3]); + } +} + +/* + * Fixes for the National Semiconductor PC78308VUL SuperI/O + * + * Some versions of Open Firmware incorrectly initialize the IRQ settings + * for keyboard and mouse + */ +static inline void __init sio_write(u8 val, u8 index) +{ + outb(index, 0x15c); + outb(val, 0x15d); +} + +static inline u8 __init sio_read(u8 index) +{ + outb(index, 0x15c); + return inb(0x15d); +} + +static void __init sio_fixup_irq(const char *name, u8 device, u8 level, + u8 type) +{ + u8 level0, type0, active; + + /* select logical device */ + sio_write(device, 0x07); + active = sio_read(0x30); + level0 = sio_read(0x70); + type0 = sio_read(0x71); + if (level0 != level || type0 != type || !active) { + printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " + "remapping to level %d, type %d, active\n", + name, level0, type0, !active ? "in" : "", level, type); + sio_write(0x01, 0x30); + sio_write(level, 0x70); + sio_write(type, 0x71); + } +} + +static void __init sio_init(void) +{ + struct device_node *root; + + if ((root = find_path_device("/")) && + !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { + /* logical device 0 (KBC/Keyboard) */ + sio_fixup_irq("keyboard", 0, 1, 2); + /* select logical device 1 (KBC/Mouse) */ + sio_fixup_irq("mouse", 1, 12, 2); + } +} + + +static void __init pegasos_set_l2cr(void) +{ + struct device_node *np; + + /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ + if (_chrp_type != _CHRP_Pegasos) + return; + + /* Enable L2 cache if needed */ + np = find_type_devices("cpu"); + if (np != NULL) { + unsigned int *l2cr = (unsigned int *) + get_property (np, "l2cr", NULL); + if (l2cr == NULL) { + printk ("Pegasos l2cr : no cpu l2cr property found\n"); + return; + } + if (!((*l2cr) & 0x80000000)) { + printk ("Pegasos l2cr : L2 cache was not active, " + "activating\n"); + _set_L2CR(0); + _set_L2CR((*l2cr) | 0x80000000); + } + } +} + +void __init chrp_setup_arch(void) +{ + struct device_node *root = find_path_device ("/"); + char *machine = NULL; + struct device_node *device; + unsigned int *p = NULL; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + if (root) + machine = get_property(root, "model", NULL); + if (machine && strncmp(machine, "Pegasos", 7) == 0) { + _chrp_type = _CHRP_Pegasos; + } else if (machine && strncmp(machine, "IBM", 3) == 0) { + _chrp_type = _CHRP_IBM; + } else if (machine && strncmp(machine, "MOT", 3) == 0) { + _chrp_type = _CHRP_Motorola; + } else { + /* Let's assume it is an IBM chrp if all else fails */ + _chrp_type = _CHRP_IBM; + } + printk("chrp type = %x\n", _chrp_type); + + rtas_initialize(); + if (rtas_token("display-character") >= 0) + ppc_md.progress = rtas_progress; + +#ifdef CONFIG_BOOTX_TEXT + if (ppc_md.progress == NULL && boot_text_mapped) + ppc_md.progress = btext_progress; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + /* this is fine for chrp */ + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + /* On pegasos, enable the L2 cache if not already done by OF */ + pegasos_set_l2cr(); + + /* Lookup PCI host bridges */ + chrp_find_bridges(); + + /* + * Temporary fixes for PCI devices. + * -- Geert + */ + hydra_init(); /* Mac I/O */ + + /* + * Fix the Super I/O configuration + */ + sio_init(); + + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + ppc_md.heartbeat = chrp_event_scan; + ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; + ppc_md.heartbeat_count = 1; + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, ppc_md.heartbeat_reset); + } + + pci_create_OF_bus_map(); + + /* + * Print the banner, then scroll down so boot progress + * can be printed. -- Cort + */ + if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); +} + +void +chrp_event_scan(void) +{ + unsigned char log[1024]; + int ret = 0; + + /* XXX: we should loop until the hardware says no more error logs -- Cort */ + rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, + __pa(log), 1024); + ppc_md.heartbeat_count = ppc_md.heartbeat_reset; +} + +/* + * Finds the open-pic node and sets up the mpic driver. + */ +static void __init chrp_find_openpic(void) +{ + struct device_node *np, *root; + int len, i, j, irq_count; + int isu_size, idu_size; + unsigned int *iranges, *opprop = NULL; + int oplen = 0; + unsigned long opaddr; + int na = 1; + unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; + + np = find_type_devices("open-pic"); + if (np == NULL) + return; + root = find_path_device("/"); + if (root) { + opprop = (unsigned int *) get_property + (root, "platform-open-pic", &oplen); + na = prom_n_addr_cells(root); + } + if (opprop && oplen >= na * sizeof(unsigned int)) { + opaddr = opprop[na-1]; /* assume 32-bit */ + oplen /= na * sizeof(unsigned int); + } else { + if (np->n_addrs == 0) + return; + opaddr = np->addrs[0].address; + oplen = 0; + } + + printk(KERN_INFO "OpenPIC at %lx\n", opaddr); + + irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ + prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4); + + iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); + if (iranges == NULL) + len = 0; /* non-distributed mpic */ + else + len /= 2 * sizeof(unsigned int); + + /* + * The first pair of cells in interrupt-ranges refers to the + * IDU; subsequent pairs refer to the ISUs. + */ + if (oplen < len) { + printk(KERN_ERR "Insufficient addresses for distributed" + " OpenPIC (%d < %d)\n", np->n_addrs, len); + len = oplen; + } + + isu_size = 0; + idu_size = 0; + if (len > 0 && iranges[1] != 0) { + printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", + iranges[0], iranges[0] + iranges[1] - 1); + idu_size = iranges[1]; + } + if (len > 1) + isu_size = iranges[3]; + + chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY, + isu_size, NUM_ISA_INTERRUPTS, irq_count, + NR_IRQS - 4, init_senses, irq_count, + " MPIC "); + if (chrp_mpic == NULL) { + printk(KERN_ERR "Failed to allocate MPIC structure\n"); + return; + } + + j = na - 1; + for (i = 1; i < len; ++i) { + iranges += 2; + j += na; + printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", + iranges[0], iranges[0] + iranges[1] - 1, + opprop[j]); + mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); + } + + mpic_init(chrp_mpic); + mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); +} + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) +static struct irqaction xmon_irqaction = { + .handler = xmon_irq, + .mask = CPU_MASK_NONE, + .name = "XMON break", +}; +#endif + +void __init chrp_init_IRQ(void) +{ + struct device_node *np; + unsigned long chrp_int_ack = 0; +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + struct device_node *kbd; +#endif + + for (np = find_devices("pci"); np != NULL; np = np->next) { + unsigned int *addrp = (unsigned int *) + get_property(np, "8259-interrupt-acknowledge", NULL); + + if (addrp == NULL) + continue; + chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; + break; + } + if (np == NULL) + printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); + + chrp_find_openpic(); + + i8259_init(chrp_int_ack, 0); + + if (_chrp_type == _CHRP_Pegasos) + ppc_md.get_irq = i8259_irq; + else + ppc_md.get_irq = mpic_get_irq; + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + /* see if there is a keyboard in the device tree + with a parent of type "adb" */ + for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) + if (kbd->parent && kbd->parent->type + && strcmp(kbd->parent->type, "adb") == 0) + break; + if (kbd) + setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); +#endif +} + +void __init +chrp_init2(void) +{ + request_region(0x20,0x20,"pic1"); + request_region(0xa0,0x20,"pic2"); + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); + + if (ppc_md.progress) + ppc_md.progress(" Have fun! ", 0x7777); +} + +void __init chrp_init(void) +{ + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + isa_io_base = CHRP_ISA_IO_BASE; /* default value */ + ppc_do_canonicalize_irqs = 1; + + /* Assume we have an 8259... */ + __irq_offset_value = NUM_ISA_INTERRUPTS; + + ppc_md.setup_arch = chrp_setup_arch; + ppc_md.show_cpuinfo = chrp_show_cpuinfo; + + ppc_md.init_IRQ = chrp_init_IRQ; + ppc_md.init = chrp_init2; + + ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; + + ppc_md.restart = rtas_restart; + ppc_md.power_off = rtas_power_off; + ppc_md.halt = rtas_halt; + + ppc_md.time_init = chrp_time_init; + ppc_md.set_rtc_time = chrp_set_rtc_time; + ppc_md.get_rtc_time = chrp_get_rtc_time; + ppc_md.calibrate_decr = chrp_calibrate_decr; + +#ifdef CONFIG_SMP + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ +} + +#ifdef CONFIG_BOOTX_TEXT +void +btext_progress(char *s, unsigned short hex) +{ + btext_drawstring(s); + btext_drawstring("\n"); +} +#endif /* CONFIG_BOOTX_TEXT */ diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c new file mode 100644 index 00000000000..bf68282670d --- /dev/null +++ b/arch/powerpc/platforms/chrp/smp.c @@ -0,0 +1,94 @@ +/* + * Smp support for CHRP machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great + * deal of code from the sparc and intel versions. + * + * Copyright (C) 1999 Cort Dougan + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern unsigned long smp_chrp_cpu_nr; + +static int __init smp_chrp_probe(void) +{ + if (smp_chrp_cpu_nr > 1) + openpic_request_IPIs(); + + return smp_chrp_cpu_nr; +} + +static void __devinit smp_chrp_kick_cpu(int nr) +{ + *(unsigned long *)KERNELBASE = nr; + asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); +} + +static void __devinit smp_chrp_setup_cpu(int cpu_nr) +{ + if (OpenPIC_Addr) + do_openpic_setup_cpu(); +} + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned int timebase_upper = 0, timebase_lower = 0; + +void __devinit smp_chrp_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase_upper = get_tbu(); + timebase_lower = get_tbl(); + spin_unlock(&timebase_lock); + + while (timebase_upper || timebase_lower) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +void __devinit smp_chrp_take_timebase(void) +{ + while (!(timebase_upper || timebase_lower)) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase_upper, timebase_lower); + timebase_upper = 0; + timebase_lower = 0; + spin_unlock(&timebase_lock); + printk("CPU %i taken timebase\n", smp_processor_id()); +} + +/* CHRP with openpic */ +struct smp_ops_t chrp_smp_ops = { + .message_pass = smp_openpic_message_pass, + .probe = smp_chrp_probe, + .kick_cpu = smp_chrp_kick_cpu, + .setup_cpu = smp_chrp_setup_cpu, + .give_timebase = smp_chrp_give_timebase, + .take_timebase = smp_chrp_take_timebase, +}; diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c new file mode 100644 index 00000000000..9e53535ddb8 --- /dev/null +++ b/arch/powerpc/platforms/chrp/time.c @@ -0,0 +1,188 @@ +/* + * arch/ppc/platforms/chrp_time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * Adapted for PowerPC (PReP) by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu). + * Copied and modified from arch/i386/kernel/time.c + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +extern spinlock_t rtc_lock; + +static int nvram_as1 = NVRAM_AS1; +static int nvram_as0 = NVRAM_AS0; +static int nvram_data = NVRAM_DATA; + +long __init chrp_time_init(void) +{ + struct device_node *rtcs; + int base; + + rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); + if (rtcs == NULL) + rtcs = find_compatible_devices("rtc", "ds1385-rtc"); + if (rtcs == NULL || rtcs->addrs == NULL) + return 0; + base = rtcs->addrs[0].address; + nvram_as1 = 0; + nvram_as0 = base; + nvram_data = base + 1; + + return 0; +} + +int chrp_cmos_clock_read(int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + return (inb(nvram_data)); +} + +void chrp_cmos_clock_write(unsigned long val, int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + outb(val, nvram_data); + return; +} + +/* + * Set the hardware clock. -- Cort + */ +int chrp_set_rtc_time(struct rtc_time *tmarg) +{ + unsigned char save_control, save_freq_select; + struct rtc_time tm = *tmarg; + + spin_lock(&rtc_lock); + + save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + tm.tm_year -= 1900; + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(tm.tm_sec); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_year); + } + chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); + chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); + chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); + chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); + chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); + chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + chrp_cmos_clock_write(save_control, RTC_CONTROL); + chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + return 0; +} + +void chrp_get_rtc_time(struct rtc_time *tm) +{ + unsigned int year, mon, day, hour, min, sec; + int uip, i; + + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + + /* Since the UIP flag is set for about 2.2 ms and the clock + * is typically written with a precision of 1 jiffy, trying + * to obtain a precision better than a few milliseconds is + * an illusion. Only consistency is interesting, this also + * allows to use the routine for /dev/rtc without a potential + * 1 second kernel busy loop triggered by any reader of /dev/rtc. + */ + + for ( i = 0; i<1000000; i++) { + uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); + sec = chrp_cmos_clock_read(RTC_SECONDS); + min = chrp_cmos_clock_read(RTC_MINUTES); + hour = chrp_cmos_clock_read(RTC_HOURS); + day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); + mon = chrp_cmos_clock_read(RTC_MONTH); + year = chrp_cmos_clock_read(RTC_YEAR); + uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); + if ((uip & RTC_UIP)==0) break; + } + + if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + if ((year += 1900) < 1970) + year += 100; + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = day; + tm->tm_mon = mon; + tm->tm_year = year; +} + + +void __init chrp_calibrate_decr(void) +{ + struct device_node *cpu; + unsigned int freq, *fp; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + freq = 16666000; /* hardcoded default */ + cpu = find_type_devices("cpu"); + if (cpu != 0) { + fp = (unsigned int *) + get_property(cpu, "timebase-frequency", NULL); + if (fp != 0) + freq = *fp; + } + ppc_tb_freq = freq; +} diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 0eca17df239..0037a8c8c81 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -71,10 +71,6 @@ static u32 level_mask[4]; static DEFINE_SPINLOCK(pmac_pic_lock); -/* XXX here for now, should move to arch/powerpc/kernel/irq.c */ -int ppc_do_canonicalize_irqs; -EXPORT_SYMBOL(ppc_do_canonicalize_irqs); - #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; -- cgit v1.2.3