From bfd123bf91704b88093673e615cc93329f820ab4 Mon Sep 17 00:00:00 2001 From: Jeremy McNicoll Date: Mon, 5 May 2008 18:17:24 -0400 Subject: [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting The following adds local bus, flash and MTD partition nodes for sbc8548. As well, a compatible field for the soc node, so that of_platform_bus_probe() will pick it up. Something that is provided through this newly added epld node is the Hardware Revision which is now being utilized. Signed-off-by: Jeremy McNicoll Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8548.dts | 94 +++++++++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/sbc8548.c | 30 ++++++++++- 2 files changed, 123 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index b86e65d926c..22d967178fe 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -52,6 +52,99 @@ reg = <0x00000000 0x10000000>; }; + localbus@e0000000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0xe0000000 0x5000>; + interrupt-parent = <&mpic>; + + ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/ + 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ + 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ + 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ + 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/ + + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <1>; + device-width = <1>; + partition@0x0 { + label = "space"; + reg = <0x00000000 0x00100000>; + }; + partition@0x100000 { + label = "bootloader"; + reg = <0x00100000 0x00700000>; + read-only; + }; + }; + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0x00b10000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff /* LED */ + 0x1 0x0 0x5 0x100000 0x1fff /* Switches */ + 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */ + 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */ + >; + + led@0,0 { + compatible = "led"; + reg = <0x0 0x0 0x1fff>; + }; + + switches@1,0 { + compatible = "switches"; + reg = <0x1 0x0 0x1fff>; + }; + + hw-rev@3,0 { + compatible = "hw-rev"; + reg = <0x3 0x0 0x1fff>; + }; + + eeprom@b,0 { + compatible = "eeprom"; + reg = <0xb 0 0x1fff>; + }; + + }; + + alt-flash@6,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6 0x0 0x04000000>; + compatible = "cfi-flash"; + bank-width = <4>; + device-width = <1>; + partition@0x0 { + label = "bootloader"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@0x00100000 { + label = "file-system"; + reg = <0x00100000 0x01f00000>; + }; + partition@0x02000000 { + label = "boot-config"; + reg = <0x02000000 0x00100000>; + }; + partition@0x02100000 { + label = "space"; + reg = <0x02100000 0x01f00000>; + }; + }; + }; + soc8548@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -59,6 +152,7 @@ ranges = <0x00000000 0xe0000000 0x00100000>; reg = <0xe0000000 0x00001000>; // CCSRBAR bus-frequency = <0>; + compatible = "simple-bus"; memory-controller@2000 { compatible = "fsl,8548-memory-controller"; diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c index 488facb99fe..b9246ea0928 100644 --- a/arch/powerpc/platforms/85xx/sbc8548.c +++ b/arch/powerpc/platforms/85xx/sbc8548.c @@ -49,6 +49,8 @@ #include #include +static int sbc_rev; + static void __init sbc8548_pic_init(void) { struct mpic *mpic; @@ -79,6 +81,30 @@ static void __init sbc8548_pic_init(void) mpic_init(mpic); } +/* Extract the HW Rev from the EPLD on the board */ +static int __init sbc8548_hw_rev(void) +{ + struct device_node *np; + struct resource res; + unsigned int *rev; + int board_rev = 0; + + np = of_find_compatible_node(NULL, NULL, "hw-rev"); + if (np == NULL) { + printk("No HW-REV found in DTB.\n"); + return -ENODEV; + } + + of_address_to_resource(np, 0, &res); + of_node_put(np); + + rev = ioremap(res.start,sizeof(unsigned int)); + board_rev = (*rev) >> 28; + iounmap(rev); + + return board_rev; +} + /* * Setup the architecture */ @@ -104,6 +130,7 @@ static void __init sbc8548_setup_arch(void) } } #endif + sbc_rev = sbc8548_hw_rev(); } static void sbc8548_show_cpuinfo(struct seq_file *m) @@ -115,7 +142,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m) svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Wind River\n"); - seq_printf(m, "Machine\t\t: SBC8548\n"); + seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev); seq_printf(m, "PVR\t\t: 0x%x\n", pvid); seq_printf(m, "SVR\t\t: 0x%x\n", svid); @@ -130,6 +157,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m) static struct of_device_id __initdata of_bus_ids[] = { { .name = "soc", }, { .type = "soc", }, + { .compatible = "simple-bus", }, {}, }; -- cgit v1.2.3