From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5520.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) (limited to 'drivers/ata/pata_cs5520.c') diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 63bdcbe4558..801a00efa3e 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -99,9 +99,9 @@ static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev) { /* Set the DMA enable/disable flag */ - u8 reg = inb(ap->ioaddr.bmdma_addr + 0x02); + u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02); reg |= 1<<(adev->devno + 5); - outb(reg, ap->ioaddr.bmdma_addr + 0x02); + iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02); } /** @@ -193,7 +193,7 @@ static struct ata_port_operations cs5520_port_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -204,6 +204,7 @@ static struct ata_port_operations cs5520_port_ops = { static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { u8 pcicfg; + void *iomap[5]; static struct ata_probe_ent probe[2]; int ports = 0; @@ -234,6 +235,16 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic return -ENODEV; } + /* Map IO ports */ + iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8); + iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1); + iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8); + iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1); + iomap[4] = pcim_iomap(dev, 2, 0); + + if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) + return -ENOMEM; + /* We have to do our own plumbing as the PCI setup for this chipset is non-standard so we can't punt to the libata code */ @@ -247,10 +258,10 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic probe[0].irq_flags = 0; probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; probe[0].n_ports = 1; - probe[0].port[0].cmd_addr = 0x1F0; - probe[0].port[0].ctl_addr = 0x3F6; - probe[0].port[0].altstatus_addr = 0x3F6; - probe[0].port[0].bmdma_addr = pci_resource_start(dev, 2); + probe[0].port[0].cmd_addr = iomap[0]; + probe[0].port[0].ctl_addr = iomap[1]; + probe[0].port[0].altstatus_addr = iomap[1]; + probe[0].port[0].bmdma_addr = iomap[4]; /* The secondary lurks at different addresses but is otherwise the same beastie */ @@ -258,10 +269,10 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic probe[1] = probe[0]; INIT_LIST_HEAD(&probe[1].node); probe[1].irq = 15; - probe[1].port[0].cmd_addr = 0x170; - probe[1].port[0].ctl_addr = 0x376; - probe[1].port[0].altstatus_addr = 0x376; - probe[1].port[0].bmdma_addr = pci_resource_start(dev, 2) + 8; + probe[1].port[0].cmd_addr = iomap[2]; + probe[1].port[0].ctl_addr = iomap[3]; + probe[1].port[0].altstatus_addr = iomap[3]; + probe[1].port[0].bmdma_addr = iomap[4] + 8; /* Let libata fill in the port details */ ata_std_ports(&probe[0].port[0]); -- cgit v1.2.3