From 5d728824efeda61d304153bfcf1378a3c18b7d70 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Apr 2007 23:44:08 +0900 Subject: libata: convert the remaining PATA drivers to new init model Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf, pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x, pata_platform, pata_qdi, pata_scc and pata_winbond to new init model. * init_one()'s now follow more consistent init order * cs5520 now registers one host with two ports, not two hosts. If any of the two ports are disabled, it's made dummy as other drivers do. Tested pdc_adma and pata_legacy. Both are as broken as before. The rest are compile tested only. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5520.c | 130 +++++++++++++++++++++++++--------------------- 1 file changed, 71 insertions(+), 59 deletions(-) (limited to 'drivers/ata/pata_cs5520.c') diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index b5b27baa0be..79bef0d1fad 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -186,7 +186,6 @@ static struct ata_port_operations cs5520_port_ops = { .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -194,91 +193,104 @@ static struct ata_port_operations cs5520_port_ops = { .port_start = ata_port_start, }; -static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { + struct ata_port_info pi = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .port_ops = &cs5520_port_ops, + }; + const struct ata_port_info *ppi[2]; u8 pcicfg; - void __iomem *iomap[5]; - static struct ata_probe_ent probe[2]; - int ports = 0; + void *iomap[5]; + struct ata_host *host; + struct ata_ioports *ioaddr; + int i, rc; /* IDE port enable bits */ - pci_read_config_byte(dev, 0x60, &pcicfg); + pci_read_config_byte(pdev, 0x60, &pcicfg); /* Check if the ATA ports are enabled */ if ((pcicfg & 3) == 0) return -ENODEV; + ppi[0] = ppi[1] = &ata_dummy_port_info; + if (pcicfg & 1) + ppi[0] = π + if (pcicfg & 2) + ppi[1] = π + if ((pcicfg & 0x40) == 0) { - printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n"); - pci_write_config_byte(dev, 0x60, pcicfg | 0x40); + dev_printk(KERN_WARNING, &pdev->dev, + "DMA mode disabled. Enabling.\n"); + pci_write_config_byte(pdev, 0x60, pcicfg | 0x40); } + pi.mwdma_mask = id->driver_data; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + /* Perform set up for DMA */ - if (pci_enable_device_bars(dev, 1<<2)) { + if (pci_enable_device_bars(pdev, 1<<2)) { printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n"); return -ENODEV; } - pci_set_master(dev); - if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n"); return -ENODEV; } - if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { + if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n"); return -ENODEV; } - /* Map IO ports */ - iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8); - iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1); - iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8); - iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1); - iomap[4] = pcim_iomap(dev, 2, 0); + /* Map IO ports and initialize host accordingly */ + iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8); + iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1); + iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8); + iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1); + iomap[4] = pcim_iomap(pdev, 2, 0); if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) return -ENOMEM; - /* We have to do our own plumbing as the PCI setup for this - chipset is non-standard so we can't punt to the libata code */ - - INIT_LIST_HEAD(&probe[0].node); - probe[0].dev = pci_dev_to_dev(dev); - probe[0].port_ops = &cs5520_port_ops; - probe[0].sht = &cs5520_sht; - probe[0].pio_mask = 0x1F; - probe[0].mwdma_mask = id->driver_data; - probe[0].irq = 14; - probe[0].irq_flags = 0; - probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; - probe[0].n_ports = 1; - probe[0].port[0].cmd_addr = iomap[0]; - probe[0].port[0].ctl_addr = iomap[1]; - probe[0].port[0].altstatus_addr = iomap[1]; - probe[0].port[0].bmdma_addr = iomap[4]; - - /* The secondary lurks at different addresses but is otherwise - the same beastie */ - - probe[1] = probe[0]; - INIT_LIST_HEAD(&probe[1].node); - probe[1].irq = 15; - probe[1].port[0].cmd_addr = iomap[2]; - probe[1].port[0].ctl_addr = iomap[3]; - probe[1].port[0].altstatus_addr = iomap[3]; - probe[1].port[0].bmdma_addr = iomap[4] + 8; - - /* Let libata fill in the port details */ - ata_std_ports(&probe[0].port[0]); - ata_std_ports(&probe[1].port[0]); - - /* Now add the ports that are active */ - if (pcicfg & 1) - ports += ata_device_add(&probe[0]); - if (pcicfg & 2) - ports += ata_device_add(&probe[1]); - if (ports) - return 0; - return -ENODEV; + ioaddr = &host->ports[0]->ioaddr; + ioaddr->cmd_addr = iomap[0]; + ioaddr->ctl_addr = iomap[1]; + ioaddr->altstatus_addr = iomap[1]; + ioaddr->bmdma_addr = iomap[4]; + ata_std_ports(ioaddr); + + ioaddr = &host->ports[1]->ioaddr; + ioaddr->cmd_addr = iomap[2]; + ioaddr->ctl_addr = iomap[3]; + ioaddr->altstatus_addr = iomap[3]; + ioaddr->bmdma_addr = iomap[4] + 8; + ata_std_ports(ioaddr); + + /* activate the host */ + pci_set_master(pdev); + rc = ata_host_start(host); + if (rc) + return rc; + + for (i = 0; i < 2; i++) { + static const int irq[] = { 14, 15 }; + struct ata_port *ap = host->ports[0]; + + if (ata_port_is_dummy(ap)) + continue; + + rc = devm_request_irq(&pdev->dev, irq[ap->port_no], + ata_interrupt, 0, DRV_NAME, host); + if (rc) + return rc; + } + + return ata_host_register(host, &cs5520_sht); } /** -- cgit v1.2.3