From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- drivers/ata/pata_radisys.c | 335 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 335 insertions(+) create mode 100644 drivers/ata/pata_radisys.c (limited to 'drivers/ata/pata_radisys.c') diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c new file mode 100644 index 00000000000..6f7d0527265 --- /dev/null +++ b/drivers/ata/pata_radisys.c @@ -0,0 +1,335 @@ +/* + * pata_radisys.c - Intel PATA/SATA controllers + * + * (C) 2006 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * A PIIX relative, this device has a single ATA channel and no + * slave timings, SITRE or PPE. In that sense it is a close relative + * of the original PIIX. It does however support UDMA 33/66 per channel + * although no other modes/timings. Also lacking is 32bit I/O on the ATA + * port. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_radisys" +#define DRV_VERSION "0.4.1" + +/** + * radisys_probe_init - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int radisys_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + + +/** + * radisys_pata_error_handler - Probe specified port on PATA host controller + * @ap: Port to probe + * @classes: + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_pata_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * radisys_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. Note that the early PIIX does not have the slave + * timing port at 0x44. The Radisys is a relative of the PIIX + * but not the same so be careful. + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, /* Check me */ + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + if (pio > 0) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) + control |= 2; /* IE IORDY */ + + pci_read_config_word(dev, 0x40, &idetm_data); + + /* Enable IE and TIME as appropriate. Clear the other + drive timing bits */ + idetm_data &= 0xCCCC; + idetm_data |= (control << (4 * adev->devno)); + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + pci_write_config_word(dev, 0x40, idetm_data); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * @isich: True if the device is an ICH and has IOCFG registers + * + * Set MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u16 idetm_data; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 1 }, + { 2, 2 }, + { 3, 3 }, }; + + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally. + */ + + pci_read_config_word(dev, 0x40, &idetm_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (adev->dma_mode < XFER_UDMA_0) { + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + int control = 3; /* IORDY|TIME0 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO0 for PIO cycles. */ + + if (adev->pio_mode < needed_pio[mwdma]) + control = 1; + + /* Mask out the relevant control and timing bits we will load. Also + clear the other drive TIME register as a precaution */ + + idetm_data &= 0xCCCC; + idetm_data |= control << (4 * adev->devno); + idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); + + udma_enable &= ~(1 << adev->devno); + } else { + u8 udma_mode; + + /* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */ + + pci_read_config_byte(dev, 0x4A, &udma_mode); + + if (adev->xfer_mode == XFER_UDMA_2) + udma_mode &= ~ (1 << adev->devno); + else /* UDMA 4 */ + udma_mode |= (1 << adev->devno); + + pci_write_config_byte(dev, 0x4A, udma_mode); + + udma_enable |= (1 << adev->devno); + } + pci_write_config_word(dev, 0x40, idetm_data); + pci_write_config_byte(dev, 0x48, udma_enable); + + /* Track which port is configured */ + ap->private_data = adev; +} + +/** + * radisys_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings if + * neccessary. Our logic also clears TIME0/TIME1 for the other device so + * that, even if we get this wrong, cycles to the other device will + * be made PIO0. + */ + +static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + if (adev != ap->private_data) { + /* UDMA timing is not shared */ + if (adev->dma_mode < XFER_UDMA_0) { + if (adev->dma_mode) + radisys_set_dmamode(ap, adev); + else if (adev->pio_mode) + radisys_set_piomode(ap, adev); + } + } + return ata_qc_issue_prot(qc); +} + + +static struct scsi_host_template radisys_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations radisys_pata_ops = { + .port_disable = ata_port_disable, + .set_piomode = radisys_set_piomode, + .set_dmamode = radisys_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = radisys_pata_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = radisys_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * radisys_init_one - Register PIIX ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in radisys_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &radisys_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .udma_mask = 0x14, /* UDMA33/66 only */ + .port_ops = &radisys_pata_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id radisys_pci_tbl[] = { + { 0x1331, 0x8201, PCI_ANY_ID, PCI_ANY_ID, }, + { } /* terminate list */ +}; + +static struct pci_driver radisys_pci_driver = { + .name = DRV_NAME, + .id_table = radisys_pci_tbl, + .probe = radisys_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init radisys_init(void) +{ + return pci_register_driver(&radisys_pci_driver); +} + +static void __exit radisys_exit(void) +{ + pci_unregister_driver(&radisys_pci_driver); +} + + +module_init(radisys_init); +module_exit(radisys_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, radisys_pci_tbl); +MODULE_VERSION(DRV_VERSION); + -- cgit v1.2.3