From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- drivers/ata/pata_triflex.c | 285 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100644 drivers/ata/pata_triflex.c (limited to 'drivers/ata/pata_triflex.c') diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c new file mode 100644 index 00000000000..7dd6ea3a21e --- /dev/null +++ b/drivers/ata/pata_triflex.c @@ -0,0 +1,285 @@ +/* + * pata_triflex.c - Compaq PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * based upon + * + * triflex.c + * + * IDE Chipset driver for the Compaq TriFlex IDE controller. + * + * Known to work with the Compaq Workstation 5x00 series. + * + * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. + * Author: Torben Mathiasen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Loosely based on the piix & svwks drivers. + * + * Documentation: + * Not publically available. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_triflex" +#define DRV_VERSION "0.2.5" + +/** + * triflex_probe_init - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int triflex_probe_init(struct ata_port *ap) +{ + static const struct pci_bits triflex_enable_bits[] = { + { 0x80, 1, 0x01, 0x01 }, + { 0x80, 1, 0x02, 0x02 } + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + + +static void triflex_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * triflex_load_timing - timing configuration + * @ap: ATA interface + * @adev: Device on the bus + * @speed: speed to configure + * + * The Triflex has one set of timings per device per channel. This + * means we must do some switching. As the PIO and DMA timings don't + * match we have to do some reloading unlike PIIX devices where tuning + * tricks can avoid it. + */ + +static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 timing = 0; + u32 triflex_timing, old_triflex_timing; + int channel_offset = ap->port_no ? 0x74: 0x70; + unsigned int is_slave = (adev->devno != 0); + + + pci_read_config_dword(pdev, channel_offset, &old_triflex_timing); + triflex_timing = old_triflex_timing; + + switch(speed) + { + case XFER_MW_DMA_2: + timing = 0x0103;break; + case XFER_MW_DMA_1: + timing = 0x0203;break; + case XFER_MW_DMA_0: + timing = 0x0808;break; + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + timing = 0x0F0F;break; + case XFER_PIO_4: + timing = 0x0202;break; + case XFER_PIO_3: + timing = 0x0204;break; + case XFER_PIO_2: + timing = 0x0404;break; + case XFER_PIO_1: + timing = 0x0508;break; + case XFER_PIO_0: + timing = 0x0808;break; + default: + BUG(); + } + triflex_timing &= ~ (0xFFFF << (16 * is_slave)); + triflex_timing |= (timing << (16 * is_slave)); + + if (triflex_timing != old_triflex_timing) + pci_write_config_dword(pdev, channel_offset, triflex_timing); +} + +/** + * triflex_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Use the timing loader to set up the PIO mode. We have to do this + * because DMA start/stop will only be called once DMA occurs. If there + * has been no DMA then the PIO timings are still needed. + */ +static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + triflex_load_timing(ap, adev, adev->pio_mode); +} + +/** + * triflex_dma_start - DMA start callback + * @qc: Command in progress + * + * Usually drivers set the DMA timing at the point the set_dmamode call + * is made. Triflex however requires we load new timings on the + * transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc). + * We load the DMA timings just before starting DMA and then restore + * the PIO timing when the DMA is finished. + */ + +static void triflex_bmdma_start(struct ata_queued_cmd *qc) +{ + triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode); + ata_bmdma_start(qc); +} + +/** + * triflex_dma_stop - DMA stop callback + * @ap: ATA interface + * @adev: ATA device + * + * We loaded new timings in dma_start, as a result we need to restore + * the PIO timings in dma_stop so that the next command issue gets the + * right clock values. + */ + +static void triflex_bmdma_stop(struct ata_queued_cmd *qc) +{ + ata_bmdma_stop(qc); + triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode); +} + +static struct scsi_host_template triflex_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations triflex_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = triflex_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = triflex_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = triflex_bmdma_start, + .bmdma_stop = triflex_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &triflex_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &triflex_port_ops + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + static int printed_version; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); + + return ata_pci_init_one(dev, port_info, 2); +} + +static const struct pci_device_id triflex[] = { + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +static struct pci_driver triflex_pci_driver = { + .name = DRV_NAME, + .id_table = triflex, + .probe = triflex_init_one, + .remove = ata_pci_remove_one +}; + +static int __init triflex_init(void) +{ + return pci_register_driver(&triflex_pci_driver); +} + + +static void __exit triflex_exit(void) +{ + pci_unregister_driver(&triflex_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Compaq Triflex"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, triflex); +MODULE_VERSION(DRV_VERSION); + +module_init(triflex_init); +module_exit(triflex_exit); -- cgit v1.2.3