From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/block/Kconfig | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 509 insertions(+) create mode 100644 drivers/block/Kconfig (limited to 'drivers/block/Kconfig') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig new file mode 100644 index 00000000000..e83a1e2e8b1 --- /dev/null +++ b/drivers/block/Kconfig @@ -0,0 +1,509 @@ +# +# Block device driver configuration +# + +menu "Block devices" + +config BLK_DEV_FD + tristate "Normal floppy disk support" + depends on (!ARCH_S390 && !M68K && !IA64 && !UML) || Q40 || (SUN3X && BROKEN) + ---help--- + If you want to use the floppy disk drive(s) of your PC under Linux, + say Y. Information about this driver, especially important for IBM + Thinkpad users, is contained in . + That file also contains the location of the Floppy driver FAQ as + well as location of the fdutils package used to configure additional + parameters of the driver at run time. + + To compile this driver as a module, choose M here: the + module will be called floppy. + +config AMIGA_FLOPPY + tristate "Amiga floppy support" + depends on AMIGA + +config ATARI_FLOPPY + tristate "Atari floppy support" + depends on ATARI + +config BLK_DEV_SWIM_IOP + bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)" + depends on MAC && EXPERIMENTAL && BROKEN + help + Say Y here to support the SWIM (Super Woz Integrated Machine) IOP + floppy controller on the Macintosh IIfx and Quadra 900/950. + +config MAC_FLOPPY + tristate "Support for PowerMac floppy" + depends on PPC_PMAC && !PPC_PMAC64 + help + If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) + floppy controller, say Y here. Most commonly found in PowerMacs. + +config BLK_DEV_PS2 + tristate "PS/2 ESDI hard disk support" + depends on MCA && MCA_LEGACY && BROKEN + help + Say Y here if you have a PS/2 machine with a MCA bus and an ESDI + hard disk. + + To compile this driver as a module, choose M here: the + module will be called ps2esdi. + +config AMIGA_Z2RAM + tristate "Amiga Zorro II ramdisk support" + depends on ZORRO + help + This enables support for using Chip RAM and Zorro II RAM as a + ramdisk or as a swap partition. Say Y if you want to include this + driver in the kernel. + + To compile this driver as a module, choose M here: the + module will be called z2ram. + +config ATARI_ACSI + tristate "Atari ACSI support" + depends on ATARI && BROKEN + ---help--- + This enables support for the Atari ACSI interface. The driver + supports hard disks and CD-ROMs, which have 512-byte sectors, or can + be switched to that mode. Due to the ACSI command format, only disks + up to 1 GB are supported. Special support for certain ACSI to SCSI + adapters, which could relax that, isn't included yet. The ACSI + driver is also the basis for certain other drivers for devices + attached to the ACSI bus: Atari SLM laser printer, BioNet-100 + Ethernet, and PAMsNet Ethernet. If you want to use one of these + devices, you need ACSI support, too. + + To compile this driver as a module, choose M here: the + module will be called acsi. + +comment "Some devices (e.g. CD jukebox) support multiple LUNs" + depends on ATARI && ATARI_ACSI + +config ACSI_MULTI_LUN + bool "Probe all LUNs on each ACSI device" + depends on ATARI_ACSI + help + If you have a ACSI device that supports more than one LUN (Logical + Unit Number), e.g. a CD jukebox, you should say Y here so that all + will be found by the ACSI driver. An ACSI device with multiple LUNs + acts logically like multiple ACSI devices. The vast majority of ACSI + devices have only one LUN, and so most people can say N here and + should in fact do so, because it is safer. + +config ATARI_SLM + tristate "Atari SLM laser printer support" + depends on ATARI && ATARI_ACSI!=n + help + If you have an Atari SLM laser printer, say Y to include support for + it in the kernel. Otherwise, say N. This driver is also available as + a module ( = code which can be inserted in and removed from the + running kernel whenever you want). The module will be called + acsi_slm. Be warned: the driver needs much ST-RAM and can cause + problems due to that fact! + +config BLK_DEV_XD + tristate "XT hard disk support" + depends on ISA + help + Very old 8 bit hard disk controllers used in the IBM XT computer + will be supported if you say Y here. + + To compile this driver as a module, choose M here: the + module will be called xd. + + It's pretty unlikely that you have one of these: say N. + +config PARIDE + tristate "Parallel port IDE device support" + depends on PARPORT + ---help--- + There are many external CD-ROM and disk devices that connect through + your computer's parallel port. Most of them are actually IDE devices + using a parallel port IDE adapter. This option enables the PARIDE + subsystem which contains drivers for many of these external drives. + Read for more information. + + If you have said Y to the "Parallel-port support" configuration + option, you may share a single port between your printer and other + parallel port devices. Answer Y to build PARIDE support into your + kernel, or M if you would like to build it as a loadable module. If + your parallel port support is in a loadable module, you must build + PARIDE as a module. If you built PARIDE support into your kernel, + you may still build the individual protocol modules and high-level + drivers as loadable modules. If you build this support as a module, + it will be called paride. + + To use the PARIDE support, you must say Y or M here and also to at + least one high-level driver (e.g. "Parallel port IDE disks", + "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and + to at least one protocol driver (e.g. "ATEN EH-100 protocol", + "MicroSolutions backpack protocol", "DataStor Commuter protocol" + etc.). + +source "drivers/block/paride/Kconfig" + +config BLK_CPQ_DA + tristate "Compaq SMART2 support" + depends on PCI + help + This is the driver for Compaq Smart Array controllers. Everyone + using these boards should say Y here. See the file + for the current list of boards + supported by this driver, and for further information on the use of + this driver. + +config BLK_CPQ_CISS_DA + tristate "Compaq Smart Array 5xxx support" + depends on PCI + help + This is the driver for Compaq Smart Array 5xxx controllers. + Everyone using these boards should say Y here. + See for the current list of + boards supported by this driver, and for further information + on the use of this driver. + +config CISS_SCSI_TAPE + bool "SCSI tape drive support for Smart Array 5xxx" + depends on BLK_CPQ_CISS_DA && SCSI && PROC_FS + help + When enabled (Y), this option allows SCSI tape drives and SCSI medium + changers (tape robots) to be accessed via a Compaq 5xxx array + controller. (See for more details.) + + "SCSI support" and "SCSI tape support" must also be enabled for this + option to work. + + When this option is disabled (N), the SCSI portion of the driver + is not compiled. + +config BLK_DEV_DAC960 + tristate "Mylex DAC960/DAC1100 PCI RAID Controller support" + depends on PCI + help + This driver adds support for the Mylex DAC960, AcceleRAID, and + eXtremeRAID PCI RAID controllers. See the file + for further information about + this driver. + + To compile this driver as a module, choose M here: the + module will be called DAC960. + +config BLK_DEV_UMEM + tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + ---help--- + Saying Y here will include support for the MM5415 family of + battery backed (Non-volatile) RAM cards. + + + The cards appear as block devices that can be partitioned into + as many as 15 partitions. + + To compile this driver as a module, choose M here: the + module will be called umem. + + The umem driver has not yet been allocated a MAJOR number, so + one is chosen dynamically. Use "devfs" or look in /proc/devices + for the device number + +config BLK_DEV_UBD + bool "Virtual block device" + depends on UML + ---help--- + The User-Mode Linux port includes a driver called UBD which will let + you access arbitrary files on the host computer as block devices. + Unless you know that you do not need such virtual block devices say + Y here. + +config BLK_DEV_UBD_SYNC + bool "Always do synchronous disk IO for UBD" + depends on BLK_DEV_UBD + ---help--- + Writes to the virtual block device are not immediately written to the + host's disk; this may cause problems if, for example, the User-Mode + Linux 'Virtual Machine' uses a journalling filesystem and the host + computer crashes. + + Synchronous operation (i.e. always writing data to the host's disk + immediately) is configurable on a per-UBD basis by using a special + kernel command line option. Alternatively, you can say Y here to + turn on synchronous operation by default for all block devices. + + If you're running a journalling file system (like reiserfs, for + example) in your virtual machine, you will want to say Y here. If + you care for the safety of the data in your virtual machine, Y is a + wise choice too. In all other cases (for example, if you're just + playing around with User-Mode Linux) you can choose N. + +config BLK_DEV_COW_COMMON + bool + default BLK_DEV_UBD + +config MMAPPER + tristate "Example IO memory driver (BROKEN)" + depends on UML && BROKEN + ---help--- + The User-Mode Linux port can provide support for IO Memory + emulation with this option. This allows a host file to be + specified as an I/O region on the kernel command line. That file + will be mapped into UML's kernel address space where a driver can + locate it and do whatever it wants with the memory, including + providing an interface to it for UML processes to use. + + For more information, see + . + + If you'd like to be able to provide a simulated IO port space for + User-Mode Linux processes, say Y. If unsure, say N. + +config BLK_DEV_LOOP + tristate "Loopback device support" + ---help--- + Saying Y here will allow you to use a regular file as a block + device; you can then create a file system on that block device and + mount it just as you would mount other block devices such as hard + drive partitions, CD-ROM drives or floppy drives. The loop devices + are block special device files with major number 7 and typically + called /dev/loop0, /dev/loop1 etc. + + This is useful if you want to check an ISO 9660 file system before + burning the CD, or if you want to use floppy images without first + writing them to floppy. Furthermore, some Linux distributions avoid + the need for a dedicated Linux partition by keeping their complete + root file system inside a DOS FAT file using this loop device + driver. + + To use the loop device, you need the losetup utility, found in the + util-linux package, see + . + + The loop device driver can also be used to "hide" a file system in + a disk partition, floppy, or regular file, either using encryption + (scrambling the data) or steganography (hiding the data in the low + bits of, say, a sound file). This is also safe if the file resides + on a remote file server. + + There are several ways of encrypting disks. Some of these require + kernel patches. The vanilla kernel offers the cryptoloop option + and a Device Mapper target (which is superior, as it supports all + file systems). If you want to use the cryptoloop, say Y to both + LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 + or later) version of util-linux. Additionally, be aware that + the cryptoloop is not safe for storing journaled filesystems. + + Note that this loop device has nothing to do with the loopback + device used for network connections from the machine to itself. + + To compile this driver as a module, choose M here: the + module will be called loop. + + Most users will answer N here. + +config BLK_DEV_CRYPTOLOOP + tristate "Cryptoloop Support" + select CRYPTO + depends on BLK_DEV_LOOP + ---help--- + Say Y here if you want to be able to use the ciphers that are + provided by the CryptoAPI as loop transformation. This might be + used as hard disk encryption. + + WARNING: This device is not safe for journaled file systems like + ext3 or Reiserfs. Please use the Device Mapper crypto module + instead, which can be configured to be on-disk compatible with the + cryptoloop device. + +config BLK_DEV_NBD + tristate "Network block device support" + depends on NET + ---help--- + Saying Y here will allow your computer to be a client for network + block devices, i.e. it will be able to use block devices exported by + servers (mount file systems on them etc.). Communication between + client and server works over TCP/IP networking, but to the client + program this is hidden: it looks like a regular local file access to + a block device special file such as /dev/nd0. + + Network block devices also allows you to run a block-device in + userland (making server and client physically the same computer, + communicating using the loopback network device). + + Read for more information, especially + about where to find the server code, which runs in user space and + does not need special kernel support. + + Note that this has nothing to do with the network file systems NFS + or Coda; you can say N here even if you intend to use NFS or Coda. + + To compile this driver as a module, choose M here: the + module will be called nbd. + + If unsure, say N. + +config BLK_DEV_SX8 + tristate "Promise SATA SX8 support" + depends on PCI + ---help--- + Saying Y or M here will enable support for the + Promise SATA SX8 controllers. + + Use devices /dev/sx8/$N and /dev/sx8/$Np$M. + +config BLK_DEV_UB + tristate "Low Performance USB Block driver" + depends on USB + help + This driver supports certain USB attached storage devices + such as flash keys. + + Warning: Enabling this cripples the usb-storage driver. + + If unsure, say N. + +config BLK_DEV_RAM + tristate "RAM disk support" + ---help--- + Saying Y here will allow you to use a portion of your RAM memory as + a block device, so that you can make file systems on it, read and + write to it and do all the other things that you can do with normal + block devices (such as hard drives). It is usually used to load and + store a copy of a minimal root file system off of a floppy into RAM + during the initial install of Linux. + + Note that the kernel command line option "ramdisk=XX" is now + obsolete. For details, read . + + To compile this driver as a module, choose M here: the + module will be called rd. + + Most normal users won't need the RAM disk functionality, and can + thus say N here. + +config BLK_DEV_RAM_COUNT + int "Default number of RAM disks" if BLK_DEV_RAM + default "16" + help + The default value is 16 RAM disks. Change this if you know what + are doing. If you boot from a filesystem that needs to be extracted + in memory, you will need at least one RAM disk (e.g. root on cramfs). + +config BLK_DEV_RAM_SIZE + int "Default RAM disk size (kbytes)" + depends on BLK_DEV_RAM + default "4096" + help + The default value is 4096 kilobytes. Only change this if you know + what are you doing. If you are using IBM S/390, then set this to + 8192. + +config BLK_DEV_INITRD + bool "Initial RAM disk (initrd) support" + depends on BLK_DEV_RAM=y + help + The initial RAM disk is a RAM disk that is loaded by the boot loader + (loadlin or lilo) and that is mounted as root before the normal boot + procedure. It is typically used to load modules needed to mount the + "real" root file system, etc. See + for details. + +config INITRAMFS_SOURCE + string "Initramfs source file(s)" + default "" + help + This can be either a single cpio archive with a .cpio suffix or a + space-separated list of directories and files for building the + initramfs image. A cpio archive should contain a filesystem archive + to be used as an initramfs image. Directories should contain a + filesystem layout to be included in the initramfs image. Files + should contain entries according to the format described by the + "usr/gen_init_cpio" program in the kernel tree. + + When multiple directories and files are specified then the + initramfs image will be the aggregate of all of them. + + See