From db5e6df172309c382982790aafa8cd87dc0b6292 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 29 Dec 2008 11:19:10 +0100 Subject: USB: ub: use USB API functions rather than constants This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include @depends on !inc && (r1||r5)@ @@ + #include #include // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/block') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 12fb816db7b..b36b84fbe39 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -2146,10 +2146,9 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, ep = &altsetting->endpoint[i].desc; /* Is it a BULK endpoint? */ - if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK) { + if (usb_endpoint_xfer_bulk(ep)) { /* BULK in or out? */ - if (ep->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(ep)) { if (ep_in == NULL) ep_in = ep; } else { @@ -2168,9 +2167,9 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, sc->send_ctrl_pipe = usb_sndctrlpipe(dev, 0); sc->recv_ctrl_pipe = usb_rcvctrlpipe(dev, 0); sc->send_bulk_pipe = usb_sndbulkpipe(dev, - ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_out)); sc->recv_bulk_pipe = usb_rcvbulkpipe(dev, - ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_in)); return 0; } -- cgit v1.2.3 From e6e244b6cb1f70e7109381626293cd40a8334ed3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:47:44 -0500 Subject: usb-storage: prepare for subdriver separation This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern CC: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/block') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index b36b84fbe39..69b7f8e7759 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -391,7 +391,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum); */ #ifdef CONFIG_USB_LIBUSUAL -#define ub_usb_ids storage_usb_ids +#define ub_usb_ids usb_storage_usb_ids #else static struct usb_device_id ub_usb_ids[] = { -- cgit v1.2.3