From 3137553d3f78f12a077459ee59e4b17f8db9f0cf Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 8 May 2007 00:37:04 -0700 Subject: Char: cyclades, probe cleanup - add fail paths - merge 3 similar initializations into one (Z, Ze, Y) [akpm@linux-foundation.org: build fix] Signed-off-by: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 468 ++++++++++++++++++++---------------------------- 1 file changed, 198 insertions(+), 270 deletions(-) (limited to 'drivers/char/cyclades.c') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 7fe4bb60f69..060011134aa 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -4455,6 +4455,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); if (cinfo->ports == NULL) { printk(KERN_ERR "Cyclades: cannot allocate ports\n"); + cinfo->nports = 0; return -ENOMEM; } @@ -4647,9 +4648,15 @@ static int __init cy_detect_isa(void) /* probe for CD1400... */ cy_isa_address = ioremap(isa_address, CyISA_Ywin); + if (cy_isa_address == NULL) { + printk(KERN_ERR "Cyclom-Y/ISA: can't remap base " + "address\n"); + continue; + } cy_isa_nchan = CyPORTS_PER_CHIP * cyy_init_card(cy_isa_address, 0); if (cy_isa_nchan == 0) { + iounmap(cy_isa_address); continue; } #ifdef MODULE @@ -4663,6 +4670,7 @@ static int __init cy_detect_isa(void) printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the " "IRQ could not be detected.\n", (unsigned long)cy_isa_address); + iounmap(cy_isa_address); continue; } @@ -4671,6 +4679,7 @@ static int __init cy_detect_isa(void) "more channels are available. Change NR_PORTS " "in cyclades.c and recompile kernel.\n", (unsigned long)cy_isa_address); + iounmap(cy_isa_address); return nboard; } /* fill the next cy_card structure available */ @@ -4683,6 +4692,7 @@ static int __init cy_detect_isa(void) "more cards can be used. Change NR_CARDS in " "cyclades.c and recompile kernel.\n", (unsigned long)cy_isa_address); + iounmap(cy_isa_address); return nboard; } @@ -4692,6 +4702,7 @@ static int __init cy_detect_isa(void) printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " "could not allocate IRQ#%d.\n", (unsigned long)cy_isa_address, cy_isa_irq); + iounmap(cy_isa_address); return nboard; } @@ -4702,7 +4713,12 @@ static int __init cy_detect_isa(void) cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; cy_card[j].num_chips = cy_isa_nchan / 4; - cy_init_card(&cy_card[j]); + if (cy_init_card(&cy_card[j])) { + cy_card[j].base_addr = NULL; + free_irq(cy_isa_irq, &cy_card[j]); + iounmap(cy_isa_address); + continue; + } nboard++; printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " @@ -4736,333 +4752,245 @@ static void __devinit plx_init(void __iomem * addr, __u32 initctl) cy_writel(addr + initctl, readl(addr + initctl) & ~0x20000000); } -static int __devinit cy_init_Ze(struct RUNTIME_9060 __iomem *cy_pci_addr0, - int cy_pci_irq, struct pci_dev *pdev) -{ - void __iomem *cy_pci_addr2; - unsigned int j; - unsigned short cy_pci_nchan; - - cy_pci_addr2 = pci_iomap(pdev, 2, CyPCI_Ze_win); - - readl(&cy_pci_addr0->mail_box_0); - dev_dbg(&pdev->dev, "new Cyclades-Z board. FPGA not loaded\n"); - - /* This must be the new Cyclades-Ze/PCI. */ - cy_pci_nchan = ZE_V1_NPORTS; - - if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { - dev_err(&pdev->dev, "Cyclades-Ze/PCI found, but no channels " - "are available.\nChange NR_PORTS in cyclades.c " - "and recompile kernel.\n"); - return -EIO; - } - - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == NULL) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - dev_err(&pdev->dev, "Cyclades-Ze/PCI found, but no more " - "cards can be used.\nChange NR_CARDS in " - "cyclades.c and recompile kernel.\n"); - return -EIO; - } -#ifdef CONFIG_CYZ_INTR - /* allocate IRQ only if board has an IRQ */ - if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) { - if (request_irq(cy_pci_irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", - &cy_card[j])) { - dev_err(&pdev->dev, "could not allocate IRQ.\n"); - return -EIO; - } - } -#endif /* CONFIG_CYZ_INTR */ - - /* set cy_card */ - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = -1; - cy_init_card(&cy_card[j]); - pci_set_drvdata(pdev, &cy_card[j]); - - dev_info(&pdev->dev, "Cyclades-Ze/PCI #%d found: %d channels starting " - "from port %d.\n", j + 1, cy_pci_nchan, cy_next_channel); - - for (j = cy_next_channel; j < cy_next_channel + cy_pci_nchan; j++) - tty_register_device(cy_serial_driver, j, &pdev->dev); - cy_next_channel += cy_pci_nchan; - - return 0; -} - static int __devinit cy_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - unsigned char cyy_rev_id; - int cy_pci_irq; - __u32 mailbox; - void __iomem *cy_pci_addr0, *cy_pci_addr2; - unsigned int device_id; - unsigned short j, cy_pci_nchan, plx_ver; - int retval; + void __iomem *addr0 = NULL, *addr2 = NULL; + char *card_name = NULL; + u32 mailbox; + unsigned int device_id, nchan = 0, card_no, i; + unsigned char plx_ver; + int retval, irq; retval = pci_enable_device(pdev); if (retval) { dev_err(&pdev->dev, "cannot enable device\n"); - return retval; + goto err; } /* read PCI configuration area */ - cy_pci_irq = pdev->irq; - pci_read_config_byte(pdev, PCI_REVISION_ID, &cyy_rev_id); - + irq = pdev->irq; device_id = pdev->device & ~PCI_DEVICE_ID_MASK; +#if defined(__alpha__) + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ + dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " + "addresses on Alpha systems.\n"); + retval = -EIO; + goto err_dis; + } +#endif + if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { + dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " + "addresses\n"); + retval = -EIO; + goto err_dis; + } + + if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " + "it...\n"); + pdev->resource[2].flags &= ~IORESOURCE_IO; + } + + retval = pci_request_regions(pdev, "cyclades"); + if (retval) { + dev_err(&pdev->dev, "failed to reserve resources\n"); + goto err_dis; + } + + retval = -EIO; if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { - dev_dbg(&pdev->dev, "Cyclom-Y/PCI found\n"); - - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - dev_warn(&pdev->dev, "PCI I/O bit incorrectly " - "set. Ignoring it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } + card_name = "Cyclom-Y"; - /* Although we don't use this I/O region, we should - request it from the kernel anyway, to avoid problems - with other drivers accessing it. */ - retval = pci_request_regions(pdev, "Cyclom-Y"); - if (retval) { - dev_err(&pdev->dev, "failed to reserve resources\n"); - return retval; + addr0 = pci_iomap(pdev, 0, CyPCI_Yctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; } -#if defined(__alpha__) - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ - dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for " - "low addresses on Alpha systems.\n"); - return -EIO; + addr2 = pci_iomap(pdev, 2, CyPCI_Ywin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; } -#endif - cy_pci_addr0 = pci_iomap(pdev, 0, CyPCI_Yctl); - cy_pci_addr2 = pci_iomap(pdev, 2, CyPCI_Ywin); - - dev_dbg(&pdev->dev, "Cyclom-Y/PCI: relocate winaddr=0x%p " - "ctladdr=0x%p\n", cy_pci_addr2, cy_pci_addr0); - cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP * - cyy_init_card(cy_pci_addr2, 1)); - if (cy_pci_nchan == 0) { + nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); + if (nchan == 0) { dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " "Serial-Modules\n"); return -EIO; } - if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { - dev_err(&pdev->dev, "Cyclom-Y/PCI found, but no " - "channels are available. Change NR_PORTS in " - "cyclades.c and recompile kernel.\n"); - return -EIO; - } - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == NULL) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - dev_err(&pdev->dev, "Cyclom-Y/PCI found, but no more " - "cards can be used. Change NR_CARDS in " - "cyclades.c and recompile kernel.\n"); - return -EIO; - } - - /* allocate IRQ */ - retval = request_irq(cy_pci_irq, cyy_interrupt, - IRQF_SHARED, "Cyclom-Y", &cy_card[j]); - if (retval) { - dev_err(&pdev->dev, "could not allocate IRQ\n"); - return retval; - } - - /* set cy_card */ - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_pci_nchan / 4; - cy_init_card(&cy_card[j]); - pci_set_drvdata(pdev, &cy_card[j]); - - /* enable interrupts in the PCI interface */ - plx_ver = readb(cy_pci_addr2 + CyPLX_VER) & 0x0f; - switch (plx_ver) { - case PLX_9050: - - cy_writeb(cy_pci_addr0 + 0x4c, 0x43); - break; - - case PLX_9060: - case PLX_9080: - default: /* Old boards, use PLX_9060 */ - - plx_init(cy_pci_addr0, 0x6c); - /* For some yet unknown reason, once the PLX9060 reloads - the EEPROM, the IRQ is lost and, thus, we have to - re-write it to the PCI config. registers. - This will remain here until we find a permanent - fix. */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, - cy_pci_irq); - - cy_writew(cy_pci_addr0 + 0x68, - readw(cy_pci_addr0 + 0x68) | 0x0900); - break; - } - - dev_info(&pdev->dev, "Cyclom-Y/PCI #%d found: %d channels " - "starting from port %d.\n", j + 1, cy_pci_nchan, - cy_next_channel); - - for (j = cy_next_channel; - j < cy_next_channel + cy_pci_nchan; j++) - tty_register_device(cy_serial_driver, j, &pdev->dev); - - cy_next_channel += cy_pci_nchan; - } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { - dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for " - "low addresses\n"); - return -EIO; } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { - dev_dbg(&pdev->dev, "Cyclades-Z/PCI found\n"); + struct RUNTIME_9060 __iomem *ctl_addr; - cy_pci_addr0 = pci_iomap(pdev, 0, CyPCI_Zctl); + ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } /* Disable interrupts on the PLX before resetting it */ - cy_writew(cy_pci_addr0 + 0x68, - readw(cy_pci_addr0 + 0x68) & ~0x0900); + cy_writew(addr0 + 0x68, + readw(addr0 + 0x68) & ~0x0900); - plx_init(cy_pci_addr0, 0x6c); + plx_init(addr0, 0x6c); /* For some yet unknown reason, once the PLX9060 reloads the EEPROM, the IRQ is lost and, thus, we have to re-write it to the PCI config. registers. This will remain here until we find a permanent fix. */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, cy_pci_irq); + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); - mailbox = (__u32)readl(&((struct RUNTIME_9060 __iomem *) - cy_pci_addr0)->mail_box_0); + mailbox = (u32)readl(&ctl_addr->mail_box_0); - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - dev_warn(&pdev->dev, "PCI I/O bit incorrectly " - "set. Ignoring it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } - - /* Although we don't use this I/O region, we should - request it from the kernel anyway, to avoid problems - with other drivers accessing it. */ - retval = pci_request_regions(pdev, "Cyclades-Z"); - if (retval) { - dev_err(&pdev->dev, "failed to reserve resources\n"); - return retval; + addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ? + CyPCI_Ze_win : CyPCI_Zwin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; } if (mailbox == ZE_V1) { - retval = cy_init_Ze(cy_pci_addr0, cy_pci_irq, pdev); - return retval; + card_name = "Cyclades-Ze"; + + readl(&ctl_addr->mail_box_0); + nchan = ZE_V1_NPORTS; } else { - cy_pci_addr2 = pci_iomap(pdev, 2, CyPCI_Zwin); - } + card_name = "Cyclades-8Zo"; - dev_dbg(&pdev->dev, "Cyclades-Z/PCI: relocate winaddr=0x%p " - "ctladdr=0x%p\n", cy_pci_addr2, cy_pci_addr0); #ifdef CY_PCI_DEBUG - if (mailbox == ZO_V1) { - cy_writel(&((struct RUNTIME_9060 *) - (cy_pci_addr0))->loc_addr_base, - WIN_CREG); - dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA id %lx, " - "ver %lx\n", (ulong)(0xff & - readl(&((struct CUSTOM_REG *) - cy_pci_addr2)->fpga_id)), - (ulong)(0xff & readl(&((struct CUSTOM_REG *) - cy_pci_addr2)->fpga_version))); - cy_writel(&((struct RUNTIME_9060 *) - cy_pci_addr0)->loc_addr_base, WIN_RAM); - } else { - dev_info(&pdev->dev, "Cyclades-Z/PCI: New Cyclades-Z " - "board. FPGA not loaded\n"); - } + if (mailbox == ZO_V1) { + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " + "id %lx, ver %lx\n", (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_id)), (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_version))); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); + } else { + dev_info(&pdev->dev, "Cyclades-Z/PCI: New " + "Cyclades-Z board. FPGA not loaded\n"); + } #endif - /* The following clears the firmware id word. This - ensures that the driver will not attempt to talk to - the board until it has been properly initialized. - */ - if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) - cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L); - - /* This must be a Cyclades-8Zo/PCI. The extendable - version will have a different device_id and will - be allocated its maximum number of ports. */ - cy_pci_nchan = 8; - - if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { - dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " - "channels are available. Change NR_PORTS in " - "cyclades.c and recompile kernel.\n"); - return -EIO; - } + /* The following clears the firmware id word. This + ensures that the driver will not attempt to talk to + the board until it has been properly initialized. + */ + if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) + cy_writel(addr2 + ID_ADDRESS, 0L); - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == NULL) - break; + /* This must be a Cyclades-8Zo/PCI. The extendable + version will have a different device_id and will + be allocated its maximum number of ports. */ + nchan = 8; } - if (j == NR_CARDS) { /* no more cy_cards available */ - dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " - "more cards can be used. Change NR_CARDS in " - "cyclades.c and recompile kernel.\n"); - return -EIO; + } + + if ((cy_next_channel + nchan) > NR_PORTS) { + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "channels are available. Change NR_PORTS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + /* fill the next cy_card structure available */ + for (card_no = 0; card_no < NR_CARDS; card_no++) { + if (cy_card[card_no].base_addr == NULL) + break; + } + if (card_no == NR_CARDS) { /* no more cy_cards available */ + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* allocate IRQ */ + retval = request_irq(irq, cyy_interrupt, + IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; } + cy_card[card_no].num_chips = nchan / 4; + } else { #ifdef CONFIG_CYZ_INTR /* allocate IRQ only if board has an IRQ */ - if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) { - retval = request_irq(cy_pci_irq, cyz_interrupt, + if (irq != 0 && irq != 255) { + retval = request_irq(irq, cyz_interrupt, IRQF_SHARED, "Cyclades-Z", - &cy_card[j]); + &cy_card[card_no]); if (retval) { dev_err(&pdev->dev, "could not allocate IRQ\n"); - return retval; + goto err_unmap; } } #endif /* CONFIG_CYZ_INTR */ + cy_card[card_no].num_chips = -1; + } - /* set cy_card */ - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = -1; - cy_init_card(&cy_card[j]); - pci_set_drvdata(pdev, &cy_card[j]); + /* set cy_card */ + cy_card[card_no].base_addr = addr2; + cy_card[card_no].ctl_addr = addr0; + cy_card[card_no].irq = irq; + cy_card[card_no].bus_index = 1; + cy_card[card_no].first_line = cy_next_channel; + retval = cy_init_card(&cy_card[card_no]); + if (retval) + goto err_null; - dev_info(&pdev->dev, "Cyclades-8Zo/PCI #%d found: %d channels " - "starting from port %d.\n", j + 1, cy_pci_nchan, - cy_next_channel); + pci_set_drvdata(pdev, &cy_card[card_no]); - for (j = cy_next_channel; - j < cy_next_channel + cy_pci_nchan; j++) - tty_register_device(cy_serial_driver, j, &pdev->dev); - cy_next_channel += cy_pci_nchan; + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* enable interrupts in the PCI interface */ + plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; + switch (plx_ver) { + case PLX_9050: + + cy_writeb(addr0 + 0x4c, 0x43); + break; + + case PLX_9060: + case PLX_9080: + default: /* Old boards, use PLX_9060 */ + + plx_init(addr0, 0x6c); + /* For some yet unknown reason, once the PLX9060 reloads + the EEPROM, the IRQ is lost and, thus, we have to + re-write it to the PCI config. registers. + This will remain here until we find a permanent + fix. */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); + + cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); + break; + } } + dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " + "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); + for (i = cy_next_channel; i < cy_next_channel + nchan; i++) + tty_register_device(cy_serial_driver, i, &pdev->dev); + cy_next_channel += nchan; + return 0; +err_null: + cy_card[card_no].base_addr = NULL; + free_irq(irq, &cy_card[card_no]); +err_unmap: + pci_iounmap(pdev, addr0); + if (addr2) + pci_iounmap(pdev, addr2); +err_reg: + pci_release_regions(pdev); +err_dis: + pci_disable_device(pdev); +err: + return retval; } static void __devexit cy_pci_remove(struct pci_dev *pdev) -- cgit v1.2.3