From 77451e53e0a509a98eda272567869cfe96431ba9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 16 Jul 2008 21:57:02 +0100 Subject: cyclades: use tty_port Switch cyclades to use the new tty_port structure Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 315 ++++++++++++++++++++++++------------------------ 1 file changed, 157 insertions(+), 158 deletions(-) (limited to 'drivers/char/cyclades.c') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index a957dbcc5a4..0144b19d103 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -762,7 +762,7 @@ static int cy_next_channel; /* next minor available */ /* * This is used to look up the divisor speeds and the timeouts * We're normally limited to 15 distinct baud rates. The extra - * are accessed via settings in info->flags. + * are accessed via settings in info->port.flags. * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, * HI VHI @@ -1003,7 +1003,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, cy_writeb(base_addr + (CyCAR << index), save_xir); /* if there is nowhere to put the data, discard it */ - if (info->tty == NULL) { + if (info->port.tty == NULL) { if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) == CyIVRRxEx) { /* exception */ data = readb(base_addr + (CyRDSR << index)); @@ -1015,7 +1015,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, goto end; } /* there is an open port for this data */ - tty = info->tty; + tty = info->port.tty; if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) == CyIVRRxEx) { /* exception */ data = readb(base_addr + (CyRDSR << index)); @@ -1041,7 +1041,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, readb(base_addr + (CyRDSR << index)), TTY_BREAK); info->icount.rx++; - if (info->flags & ASYNC_SAK) + if (info->port.flags & ASYNC_SAK) do_SAK(tty); } else if (data & CyFRAME) { tty_insert_flip_char(tty, @@ -1145,7 +1145,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, goto end; } info = &cinfo->ports[channel + chip * 4]; - if (info->tty == NULL) { + if (info->port.tty == NULL) { cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) & ~CyTxRdy); goto end; @@ -1190,13 +1190,13 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, } goto done; } - if (info->xmit_buf == NULL) { + if (info->port.xmit_buf == NULL) { cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) & ~CyTxRdy); goto done; } - if (info->tty->stopped || info->tty->hw_stopped) { + if (info->port.tty->stopped || info->port.tty->hw_stopped) { cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) & ~CyTxRdy); @@ -1211,7 +1211,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, * character. This is necessary because there may not be room * for the two chars needed to send a NULL.) */ - outch = info->xmit_buf[info->xmit_tail]; + outch = info->port.xmit_buf[info->xmit_tail]; if (outch) { info->xmit_cnt--; info->xmit_tail = (info->xmit_tail + 1) & @@ -1232,7 +1232,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip, } done: - tty_wakeup(info->tty); + tty_wakeup(info->port.tty); end: /* end of service */ cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f); @@ -1256,7 +1256,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, mdm_change = readb(base_addr + (CyMISR << index)); mdm_status = readb(base_addr + (CyMSVR1 << index)); - if (!info->tty) + if (!info->port.tty) goto end; if (mdm_change & CyANY_DELTA) { @@ -1273,29 +1273,29 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, wake_up_interruptible(&info->delta_msr_wait); } - if ((mdm_change & CyDCD) && (info->flags & ASYNC_CHECK_CD)) { + if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) { if (!(mdm_status & CyDCD)) { - tty_hangup(info->tty); - info->flags &= ~ASYNC_NORMAL_ACTIVE; + tty_hangup(info->port.tty); + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; } - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); } - if ((mdm_change & CyCTS) && (info->flags & ASYNC_CTS_FLOW)) { - if (info->tty->hw_stopped) { + if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) { + if (info->port.tty->hw_stopped) { if (mdm_status & CyCTS) { /* cy_start isn't used because... !!! */ - info->tty->hw_stopped = 0; + info->port.tty->hw_stopped = 0; cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) | CyTxRdy); - tty_wakeup(info->tty); + tty_wakeup(info->port.tty); } } else { if (!(mdm_status & CyCTS)) { /* cy_stop isn't used because ... !!! */ - info->tty->hw_stopped = 1; + info->port.tty->hw_stopped = 1; cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) & ~CyTxRdy); @@ -1449,7 +1449,7 @@ static void cyz_handle_rx(struct cyclades_port *info, struct BUF_CTRL __iomem *buf_ctrl) { struct cyclades_card *cinfo = info->card; - struct tty_struct *tty = info->tty; + struct tty_struct *tty = info->port.tty; unsigned int char_count; int len; #ifdef BLOCKMOVE @@ -1542,7 +1542,7 @@ static void cyz_handle_tx(struct cyclades_port *info, struct BUF_CTRL __iomem *buf_ctrl) { struct cyclades_card *cinfo = info->card; - struct tty_struct *tty = info->tty; + struct tty_struct *tty = info->port.tty; u8 data; unsigned int char_count; #ifdef BLOCKMOVE @@ -1585,7 +1585,7 @@ static void cyz_handle_tx(struct cyclades_port *info, memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + tx_put), - &info->xmit_buf[info->xmit_tail], + &info->port.xmit_buf[info->xmit_tail], small_count); tx_put = (tx_put + small_count) & (tx_bufsize - 1); @@ -1597,7 +1597,7 @@ static void cyz_handle_tx(struct cyclades_port *info, } #else while (info->xmit_cnt && char_count) { - data = info->xmit_buf[info->xmit_tail]; + data = info->port.xmit_buf[info->xmit_tail]; info->xmit_cnt--; info->xmit_tail = (info->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1); @@ -1642,7 +1642,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) special_count = 0; delta_count = 0; info = &cinfo->ports[channel]; - tty = info->tty; + tty = info->port.tty; if (tty == NULL) continue; @@ -1668,15 +1668,15 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) case C_CM_MDCD: info->icount.dcd++; delta_count++; - if (info->flags & ASYNC_CHECK_CD) { + if (info->port.flags & ASYNC_CHECK_CD) { if ((fw_ver > 241 ? ((u_long) param) : readl(&ch_ctrl->rs_status)) & C_RS_DCD) { - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); } else { - tty_hangup(info->tty); - wake_up_interruptible(&info->open_wait); - info->flags &= ~ASYNC_NORMAL_ACTIVE; + tty_hangup(info->port.tty); + wake_up_interruptible(&info->port.open_wait); + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; } } break; @@ -1814,7 +1814,7 @@ static void cyz_poll(unsigned long arg) for (port = 0; port < cinfo->nports; port++) { info = &cinfo->ports[port]; - tty = info->tty; + tty = info->port.tty; buf_ctrl = &(zfw_ctrl->buf_ctrl[port]); if (!info->throttle) @@ -1853,22 +1853,22 @@ static int startup(struct cyclades_port *info) spin_lock_irqsave(&card->card_lock, flags); - if (info->flags & ASYNC_INITIALIZED) { + if (info->port.flags & ASYNC_INITIALIZED) { free_page(page); goto errout; } if (!info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); free_page(page); goto errout; } - if (info->xmit_buf) + if (info->port.xmit_buf) free_page(page); else - info->xmit_buf = (unsigned char *)page; + info->port.xmit_buf = (unsigned char *)page; spin_unlock_irqrestore(&card->card_lock, flags); @@ -1909,10 +1909,10 @@ static int startup(struct cyclades_port *info) cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) | CyRxData); - info->flags |= ASYNC_INITIALIZED; + info->port.flags |= ASYNC_INITIALIZED; - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; info->breakon = info->breakoff = 0; memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); @@ -1994,9 +1994,9 @@ static int startup(struct cyclades_port *info) /* enable send, recv, modem !!! */ - info->flags |= ASYNC_INITIALIZED; - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->port.flags |= ASYNC_INITIALIZED; + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; info->breakon = info->breakoff = 0; memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); @@ -2065,7 +2065,7 @@ static void shutdown(struct cyclades_port *info) void __iomem *base_addr; int chip, channel, index; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) return; card = info->card; @@ -2087,14 +2087,14 @@ static void shutdown(struct cyclades_port *info) /* Clear delta_msr_wait queue to avoid mem leaks. */ wake_up_interruptible(&info->delta_msr_wait); - if (info->xmit_buf) { + if (info->port.xmit_buf) { unsigned char *temp; - temp = info->xmit_buf; - info->xmit_buf = NULL; + temp = info->port.xmit_buf; + info->port.xmit_buf = NULL; free_page((unsigned long)temp); } cy_writeb(base_addr + (CyCAR << index), (u_char) channel); - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR); #ifdef CY_DEBUG_DTR @@ -2108,9 +2108,9 @@ static void shutdown(struct cyclades_port *info) /* it may be appropriate to clear _XMIT at some later date (after testing)!!! */ - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + info->port.flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&card->card_lock, flags); } else { struct FIRM_ID __iomem *firm_id; @@ -2136,14 +2136,14 @@ static void shutdown(struct cyclades_port *info) spin_lock_irqsave(&card->card_lock, flags); - if (info->xmit_buf) { + if (info->port.xmit_buf) { unsigned char *temp; - temp = info->xmit_buf; - info->xmit_buf = NULL; + temp = info->port.xmit_buf; + info->port.xmit_buf = NULL; free_page((unsigned long)temp); } - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { cy_writel(&ch_ctrl[channel].rs_control, (__u32)(readl(&ch_ctrl[channel].rs_control) & ~(C_RS_RTS | C_RS_DTR))); @@ -2158,9 +2158,9 @@ static void shutdown(struct cyclades_port *info) #endif } - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + info->port.flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&card->card_lock, flags); } @@ -2194,10 +2194,10 @@ block_til_ready(struct tty_struct *tty, struct file *filp, * If the device is in the middle of being closed, then block * until it's done, and then try again. */ - if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->close_wait, - !(info->flags & ASYNC_CLOSING)); - return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; + if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { + wait_event_interruptible(info->port.close_wait, + !(info->port.flags & ASYNC_CLOSING)); + return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } /* @@ -2206,32 +2206,32 @@ block_til_ready(struct tty_struct *tty, struct file *filp, */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; + info->port.flags |= ASYNC_NORMAL_ACTIVE; return 0; } /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that + * this loop, info->port.count is dropped by one, so that * cy_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->open_wait, &wait); + add_wait_queue(&info->port.open_wait, &wait); #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, " - "count = %d\n", info->line, info->count); + "count = %d\n", info->line, info->port.count); #endif spin_lock_irqsave(&cinfo->card_lock, flags); if (!tty_hung_up_p(filp)) - info->count--; + info->port.count--; spin_unlock_irqrestore(&cinfo->card_lock, flags); #ifdef CY_DEBUG_COUNT printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to " - "%d\n", current->pid, info->count); + "%d\n", current->pid, info->port.count); #endif - info->blocked_open++; + info->port.blocked_open++; if (!IS_CYC_Z(*cinfo)) { chip = channel >> 2; @@ -2260,8 +2260,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp, set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + !(info->port.flags & ASYNC_INITIALIZED)) { + retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); break; } @@ -2269,7 +2269,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, spin_lock_irqsave(&cinfo->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); - if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || + if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || (readb(base_addr + (CyMSVR1 << index)) & CyDCD))) { spin_unlock_irqrestore(&cinfo->card_lock, flags); @@ -2284,7 +2284,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc block_til_ready blocking: " "ttyC%d, count = %d\n", - info->line, info->count); + info->line, info->port.count); #endif schedule(); } @@ -2298,7 +2298,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, firm_id = base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); + remove_wait_queue(&info->port.open_wait, &wait); return -EINVAL; } @@ -2327,12 +2327,12 @@ block_til_ready(struct tty_struct *tty, struct file *filp, set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { - retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + !(info->port.flags & ASYNC_INITIALIZED)) { + retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); break; } - if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || + if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || (readl(&ch_ctrl[channel].rs_status) & C_RS_DCD))) { break; @@ -2344,28 +2344,28 @@ block_til_ready(struct tty_struct *tty, struct file *filp, #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc block_til_ready blocking: " "ttyC%d, count = %d\n", - info->line, info->count); + info->line, info->port.count); #endif schedule(); } } __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); + remove_wait_queue(&info->port.open_wait, &wait); if (!tty_hung_up_p(filp)) { - info->count++; + info->port.count++; #ifdef CY_DEBUG_COUNT printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing " - "count to %d\n", current->pid, info->count); + "count to %d\n", current->pid, info->port.count); #endif } - info->blocked_open--; + info->port.blocked_open--; #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, " - "count = %d\n", info->line, info->count); + "count = %d\n", info->line, info->port.count); #endif if (retval) return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; + info->port.flags |= ASYNC_NORMAL_ACTIVE; return 0; } /* block_til_ready */ @@ -2456,27 +2456,27 @@ static int cy_open(struct tty_struct *tty, struct file *filp) printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); #endif tty->driver_data = info; - info->tty = tty; + info->port.tty = tty; if (serial_paranoia_check(info, tty->name, "cy_open")) return -ENODEV; #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, - info->count); + info->port.count); #endif - info->count++; + info->port.count++; #ifdef CY_DEBUG_COUNT printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", - current->pid, info->count); + current->pid, info->port.count); #endif /* * If the port is the middle of closing, bail out now */ - if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible(info->close_wait, - !(info->flags & ASYNC_CLOSING)); - return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; + if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { + wait_event_interruptible(info->port.close_wait, + !(info->port.flags & ASYNC_CLOSING)); + return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } /* @@ -2641,9 +2641,9 @@ static void cy_close(struct tty_struct *tty, struct file *filp) } #ifdef CY_DEBUG_OPEN printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line, - info->count); + info->port.count); #endif - if ((tty->count == 1) && (info->count != 1)) { + if ((tty->count == 1) && (info->port.count != 1)) { /* * Uh, oh. tty->count is 1, which means that the tty * structure will be freed. Info->count should always @@ -2652,24 +2652,24 @@ static void cy_close(struct tty_struct *tty, struct file *filp) * serial port won't be shutdown. */ printk(KERN_ERR "cyc:cy_close: bad serial port count; " - "tty->count is 1, info->count is %d\n", info->count); - info->count = 1; + "tty->count is 1, info->port.count is %d\n", info->port.count); + info->port.count = 1; } #ifdef CY_DEBUG_COUNT printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n", - current->pid, info->count - 1); + current->pid, info->port.count - 1); #endif - if (--info->count < 0) { + if (--info->port.count < 0) { #ifdef CY_DEBUG_COUNT printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n"); #endif - info->count = 0; + info->port.count = 0; } - if (info->count) { + if (info->port.count) { spin_unlock_irqrestore(&card->card_lock, flags); return; } - info->flags |= ASYNC_CLOSING; + info->port.flags |= ASYNC_CLOSING; /* * Now we wait for the transmit buffer to clear; and we notify @@ -2692,7 +2692,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) cy_writeb(base_addr + (CyCAR << index), (u_char) channel); cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) & ~CyRxData); - if (info->flags & ASYNC_INITIALIZED) { + if (info->port.flags & ASYNC_INITIALIZED) { /* Waiting for on-board buffers to be empty before closing the port */ spin_unlock_irqrestore(&card->card_lock, flags); @@ -2731,18 +2731,18 @@ static void cy_close(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&card->card_lock, flags); tty->closing = 0; - info->tty = NULL; - if (info->blocked_open) { + info->port.tty = NULL; + if (info->port.blocked_open) { spin_unlock_irqrestore(&card->card_lock, flags); if (info->close_delay) { msleep_interruptible(jiffies_to_msecs (info->close_delay)); } - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); spin_lock_irqsave(&card->card_lock, flags); } - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); + info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&info->port.close_wait); #ifdef CY_DEBUG_OTHER printk(KERN_DEBUG "cyc:cy_close done\n"); @@ -2777,7 +2777,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) if (serial_paranoia_check(info, tty->name, "cy_write")) return 0; - if (!info->xmit_buf) + if (!info->port.xmit_buf) return 0; spin_lock_irqsave(&info->card->card_lock, flags); @@ -2788,7 +2788,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) if (c <= 0) break; - memcpy(info->xmit_buf + info->xmit_head, buf, c); + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); info->xmit_cnt += c; @@ -2826,7 +2826,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch) if (serial_paranoia_check(info, tty->name, "cy_put_char")) return 0; - if (!info->xmit_buf) + if (!info->port.xmit_buf) return 0; spin_lock_irqsave(&info->card->card_lock, flags); @@ -2835,7 +2835,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch) return 0; } - info->xmit_buf[info->xmit_head++] = ch; + info->port.xmit_buf[info->xmit_head++] = ch; info->xmit_head &= SERIAL_XMIT_SIZE - 1; info->xmit_cnt++; info->idle_stats.xmit_bytes++; @@ -2860,7 +2860,7 @@ static void cy_flush_chars(struct tty_struct *tty) return; if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->xmit_buf) + !info->port.xmit_buf) return; start_xmit(info); @@ -2988,27 +2988,27 @@ static void set_line_char(struct cyclades_port *info) int baud, baud_rate = 0; int i; - if (!info->tty || !info->tty->termios) + if (!info->port.tty || !info->port.tty->termios) return; if (info->line == -1) return; - cflag = info->tty->termios->c_cflag; - iflag = info->tty->termios->c_iflag; + cflag = info->port.tty->termios->c_cflag; + iflag = info->port.tty->termios->c_iflag; /* * Set up the tty->alt_speed kludge */ - if (info->tty) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; + if (info->port.tty) { + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->port.tty->alt_speed = 57600; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->port.tty->alt_speed = 115200; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->port.tty->alt_speed = 230400; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->port.tty->alt_speed = 460800; } card = info->card; @@ -3020,8 +3020,8 @@ static void set_line_char(struct cyclades_port *info) index = card->bus_index; /* baud rate */ - baud = tty_get_baud_rate(info->tty); - if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + baud = tty_get_baud_rate(info->port.tty); + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { if (info->custom_divisor) baud_rate = info->baud / info->custom_divisor; @@ -3038,7 +3038,7 @@ static void set_line_char(struct cyclades_port *info) if (i == 20) i = 19; /* CD1400_MAX_SPEED */ - if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { cyy_baud_calc(info, baud_rate); } else { @@ -3059,7 +3059,7 @@ static void set_line_char(struct cyclades_port *info) /* get it right for 134.5 baud */ info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + 2; - } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { info->timeout = (info->xmit_fifo_size * HZ * 15 / baud_rate) + 2; @@ -3108,16 +3108,16 @@ static void set_line_char(struct cyclades_port *info) /* CTS flow control flag */ if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; + info->port.flags |= ASYNC_CTS_FLOW; info->cor2 |= CyCtsAE; } else { - info->flags &= ~ASYNC_CTS_FLOW; + info->port.flags &= ~ASYNC_CTS_FLOW; info->cor2 &= ~CyCtsAE; } if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + info->port.flags &= ~ASYNC_CHECK_CD; else - info->flags |= ASYNC_CHECK_CD; + info->port.flags |= ASYNC_CHECK_CD; /*********************************************** The hardware option, CyRtsAO, presents RTS when @@ -3146,8 +3146,8 @@ static void set_line_char(struct cyclades_port *info) /* set line characteristics according configuration */ cy_writeb(base_addr + (CySCHR1 << index), - START_CHAR(info->tty)); - cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty)); + START_CHAR(info->port.tty)); + cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty)); cy_writeb(base_addr + (CyCOR1 << index), info->cor1); cy_writeb(base_addr + (CyCOR2 << index), info->cor2); cy_writeb(base_addr + (CyCOR3 << index), info->cor3); @@ -3163,7 +3163,7 @@ static void set_line_char(struct cyclades_port *info) (info->default_timeout ? info->default_timeout : 0x02)); /* 10ms rx timeout */ - if (C_CLOCAL(info->tty)) { + if (C_CLOCAL(info->port.tty)) { /* without modem intr */ cy_writeb(base_addr + (CySRER << index), readb(base_addr + (CySRER << index)) | CyMdmCh); @@ -3226,8 +3226,8 @@ static void set_line_char(struct cyclades_port *info) #endif } - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); spin_unlock_irqrestore(&card->card_lock, flags); } else { @@ -3250,8 +3250,8 @@ static void set_line_char(struct cyclades_port *info) buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; /* baud rate */ - baud = tty_get_baud_rate(info->tty); - if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + baud = tty_get_baud_rate(info->port.tty); + if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { if (info->custom_divisor) baud_rate = info->baud / info->custom_divisor; @@ -3266,7 +3266,7 @@ static void set_line_char(struct cyclades_port *info) /* get it right for 134.5 baud */ info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + 2; - } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == + } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { info->timeout = (info->xmit_fifo_size * HZ * 15 / baud_rate) + 2; @@ -3318,7 +3318,7 @@ static void set_line_char(struct cyclades_port *info) } /* As the HW flow control is done in firmware, the driver doesn't need to care about it */ - info->flags &= ~ASYNC_CTS_FLOW; + info->port.flags &= ~ASYNC_CTS_FLOW; /* XON/XOFF/XANY flow control flags */ sw_flow = 0; @@ -3337,9 +3337,9 @@ static void set_line_char(struct cyclades_port *info) /* CD sensitivity */ if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + info->port.flags &= ~ASYNC_CHECK_CD; else - info->flags |= ASYNC_CHECK_CD; + info->port.flags |= ASYNC_CHECK_CD; if (baud == 0) { /* baud rate is zero, turn off line */ cy_writel(&ch_ctrl->rs_control, @@ -3361,8 +3361,8 @@ static void set_line_char(struct cyclades_port *info) "was %x\n", info->line, retval); } - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); } } /* set_line_char */ @@ -3381,7 +3381,7 @@ get_serial_info(struct cyclades_port *info, tmp.port = (info->card - cy_card) * 0x100 + info->line - cinfo->first_line; tmp.irq = cinfo->irq; - tmp.flags = info->flags; + tmp.flags = info->port.flags; tmp.close_delay = info->close_delay; tmp.closing_wait = info->closing_wait; tmp.baud_base = info->baud; @@ -3406,9 +3406,9 @@ set_serial_info(struct cyclades_port *info, new_serial.baud_base != info->baud || (new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) != - (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) + (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) return -EPERM; - info->flags = (info->flags & ~ASYNC_USR_MASK) | + info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK); info->baud = new_serial.baud_base; info->custom_divisor = new_serial.custom_divisor; @@ -3422,13 +3422,13 @@ set_serial_info(struct cyclades_port *info, info->baud = new_serial.baud_base; info->custom_divisor = new_serial.custom_divisor; - info->flags = (info->flags & ~ASYNC_FLAGS) | + info->port.flags = (info->port.flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS); info->close_delay = new_serial.close_delay * HZ / 100; info->closing_wait = new_serial.closing_wait * HZ / 100; check_and_exit: - if (info->flags & ASYNC_INITIALIZED) { + if (info->port.flags & ASYNC_INITIALIZED) { set_line_char(info); return 0; } else { @@ -4097,7 +4097,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) */ if (!(old_termios->c_cflag & CLOCAL) && (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); + wake_up_interruptible(&info->port.open_wait); #endif } /* cy_set_termios */ @@ -4326,14 +4326,14 @@ static void cy_hangup(struct tty_struct *tty) cy_flush_buffer(tty); shutdown(info); - info->count = 0; + info->port.count = 0; #ifdef CY_DEBUG_COUNT printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n", current->pid); #endif - info->tty = NULL; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - wake_up_interruptible(&info->open_wait); + info->port.tty = NULL; + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; + wake_up_interruptible(&info->port.open_wait); } /* cy_hangup */ /* @@ -4379,12 +4379,11 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) info->magic = CYCLADES_MAGIC; info->card = cinfo; info->line = port; - info->flags = STD_COM_FLAGS; info->closing_wait = CLOSING_WAIT_DELAY; info->close_delay = 5 * HZ / 10; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); + tty_port_init(&info->port); + info->port.flags = STD_COM_FLAGS; init_completion(&info->shutdown_wait); init_waitqueue_head(&info->delta_msr_wait); @@ -5237,7 +5236,7 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, for (j = 0; j < cy_card[i].nports; j++) { info = &cy_card[i].ports[j]; - if (info->count) + if (info->port.count) size = sprintf(buf + len, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", info->line, (cur_jifs - info->idle_stats.in_use) / @@ -5247,7 +5246,7 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, (cur_jifs - info->idle_stats.recv_idle)/ HZ, info->idle_stats.overruns, /* FIXME: double check locking */ - (long)info->tty->ldisc.ops->num); + (long)info->port.tty->ldisc.ops->num); else size = sprintf(buf + len, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", -- cgit v1.2.3