From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/ec3104_keyb.c | 459 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 459 insertions(+) create mode 100644 drivers/char/ec3104_keyb.c (limited to 'drivers/char/ec3104_keyb.c') diff --git a/drivers/char/ec3104_keyb.c b/drivers/char/ec3104_keyb.c new file mode 100644 index 00000000000..4aed6696882 --- /dev/null +++ b/drivers/char/ec3104_keyb.c @@ -0,0 +1,459 @@ +/* + * linux/drivers/char/ec3104_keyb.c + * + * Copyright (C) 2000 Philipp Rumpf + * + * based on linux/drivers/char/pc_keyb.c, which had the following comments: + * + * Separation of the PC low-level part by Geert Uytterhoeven, May 1997 + * See keyboard.c for the whole history. + * + * Major cleanup by Martin Mares, May 1997 + * + * Combined the keyboard and PS/2 mouse handling into one file, + * because they share the same hardware. + * Johan Myreen 1998-10-08. + * + * Code fixes to handle mouse ACKs properly. + * C. Scott Ananian 1999-01-29. + */ +/* EC3104 note: + * This code was written without any documentation about the EC3104 chip. While + * I hope I got most of the basic functionality right, the register names I use + * are most likely completely different from those in the chip documentation. + * + * If you have any further information about the EC3104, please tell me + * (prumpf@tux.org). + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +/* Some configuration switches are present in the include file... */ + +#include + +#define MSR_CTS 0x10 +#define MCR_RTS 0x02 +#define LSR_DR 0x01 +#define LSR_BOTH_EMPTY 0x60 + +static struct e5_struct { + u8 packet[8]; + int pos; + int length; + + u8 cached_mcr; + u8 last_msr; +} ec3104_keyb; + +/* Simple translation table for the SysRq keys */ + + +#ifdef CONFIG_MAGIC_SYSRQ +unsigned char ec3104_kbd_sysrq_xlate[128] = + "\000\0331234567890-=\177\t" /* 0x00 - 0x0f */ + "qwertyuiop[]\r\000as" /* 0x10 - 0x1f */ + "dfghjkl;'`\000\\zxcv" /* 0x20 - 0x2f */ + "bnm,./\000*\000 \000\201\202\203\204\205" /* 0x30 - 0x3f */ + "\206\207\210\211\212\000\000789-456+1" /* 0x40 - 0x4f */ + "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */ + "\r\000/"; /* 0x60 - 0x6f */ +#endif + +static void kbd_write_command_w(int data); +static void kbd_write_output_w(int data); +#ifdef CONFIG_PSMOUSE +static void aux_write_ack(int val); +static void __aux_write_ack(int val); +#endif + +static DEFINE_SPINLOCK(kbd_controller_lock); +static unsigned char handle_kbd_event(void); + +/* used only by send_data - set by keyboard_interrupt */ +static volatile unsigned char reply_expected; +static volatile unsigned char acknowledge; +static volatile unsigned char resend; + + +int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode) +{ + return 0; +} + +int ec3104_kbd_getkeycode(unsigned int scancode) +{ + return 0; +} + + +/* yes, it probably would be faster to use an array. I don't care. */ + +static inline unsigned char ec3104_scan2key(unsigned char scancode) +{ + switch (scancode) { + case 1: /* '`' */ + return 41; + + case 2 ... 27: + return scancode; + + case 28: /* '\\' */ + return 43; + + case 29 ... 39: + return scancode + 1; + + case 40: /* '\r' */ + return 28; + + case 41 ... 50: + return scancode + 3; + + case 51: /* ' ' */ + return 57; + + case 52: /* escape */ + return 1; + + case 54: /* insert/delete (labelled delete) */ + /* this should arguably be 110, but I'd like to have ctrl-alt-del + * working with a standard keymap */ + return 111; + + case 55: /* left */ + return 105; + case 56: /* home */ + return 102; + case 57: /* end */ + return 107; + case 58: /* up */ + return 103; + case 59: /* down */ + return 108; + case 60: /* pgup */ + return 104; + case 61: /* pgdown */ + return 109; + case 62: /* right */ + return 106; + + case 79 ... 88: /* f1 - f10 */ + return scancode - 20; + + case 89 ... 90: /* f11 - f12 */ + return scancode - 2; + + case 91: /* left shift */ + return 42; + + case 92: /* right shift */ + return 54; + + case 93: /* left alt */ + return 56; + case 94: /* right alt */ + return 100; + case 95: /* left ctrl */ + return 29; + case 96: /* right ctrl */ + return 97; + + case 97: /* caps lock */ + return 58; + case 102: /* left windows */ + return 125; + case 103: /* right windows */ + return 126; + + case 106: /* Fn */ + /* this is wrong. */ + return 84; + + default: + return 0; + } +} + +int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode, + char raw_mode) +{ + scancode &= 0x7f; + + *keycode = ec3104_scan2key(scancode); + + return 1; +} + +char ec3104_kbd_unexpected_up(unsigned char keycode) +{ + return 0200; +} + +static inline void handle_keyboard_event(unsigned char scancode) +{ +#ifdef CONFIG_VT + handle_scancode(scancode, !(scancode & 0x80)); +#endif + tasklet_schedule(&keyboard_tasklet); +} + +void ec3104_kbd_leds(unsigned char leds) +{ +} + +static u8 e5_checksum(u8 *packet, int count) +{ + int i; + u8 sum = 0; + + for (i=0; i", byte); + + ctrl_outb(byte, EC3104_SER4_DATA); + + do { + status = ctrl_inb(EC3104_SER4_LSR); + } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY); + +} + +static int e5_send_packet(u8 *packet, int count, struct e5_struct *k) +{ + int i; + + disable_irq(EC3104_IRQ_SER4); + + if (k->cached_mcr & MCR_RTS) { + printk("e5_send_packet: too slow\n"); + enable_irq(EC3104_IRQ_SER4); + return -EAGAIN; + } + + k->cached_mcr |= MCR_RTS; + ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); + + e5_wait_for_cts(k); + + printk("p: "); + + for(i=0; icached_mcr &= ~MCR_RTS; + ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); + + set_current_state(TASK_UNINTERRUPTIBLE); + + + + enable_irq(EC3104_IRQ_SER4); + + + + return 0; +} + +/* + * E5 packets we know about: + * E5->host 0x80 0x05 - resend packet + * host->E5 0x83 0x43 - set LCD contrast + * host->E5 0x85 0x41 0x02 0x02 - set LCD backlight + * E5->host 0x87 0x00 - external PS2 + * E5->host 0x88 - key press + */ + +static void e5_receive(struct e5_struct *k) +{ + k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA); + + if (k->pos == 1) { + switch(k->packet[0]) { + case 0x80: + k->length = 3; + break; + + case 0x87: /* PS2 ext */ + k->length = 6; + break; + + case 0x88: /* keyboard */ + k->length = 3; + break; + + default: + k->length = 1; + printk(KERN_WARNING "unknown E5 packet %02x\n", + k->packet[0]); + } + } + + if (k->pos == k->length) { + int i; + + if (e5_checksum(k->packet, k->length) != 0) + printk(KERN_WARNING "E5: wrong checksum\n"); + +#if 0 + printk("E5 packet ["); + for(i=0; ilength; i++) { + printk("%02x ", k->packet[i]); + } + + printk("(%02x)]\n", e5_checksum(k->packet, k->length-1)); +#endif + + switch(k->packet[0]) { + case 0x80: + case 0x88: + handle_keyboard_event(k->packet[1]); + break; + } + + k->pos = k->length = 0; + } +} + +static void ec3104_keyb_interrupt(int irq, void *data, struct pt_regs *regs) +{ + struct e5_struct *k = &ec3104_keyb; + u8 msr, lsr; + + msr = ctrl_inb(EC3104_SER4_MSR); + + if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) { + if (k->cached_mcr & MCR_RTS) + printk("confused: RTS already high\n"); + /* CTS went high. Send RTS. */ + k->cached_mcr |= MCR_RTS; + + ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); + } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) { + /* CTS went low. */ + if (!(k->cached_mcr & MCR_RTS)) + printk("confused: RTS already low\n"); + + k->cached_mcr &= ~MCR_RTS; + + ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); + } + + k->last_msr = msr; + + lsr = ctrl_inb(EC3104_SER4_LSR); + + if (lsr & LSR_DR) + e5_receive(k); +} + +static void ec3104_keyb_clear_state(void) +{ + struct e5_struct *k = &ec3104_keyb; + u8 msr, lsr; + + /* we want CTS to be low */ + k->last_msr = 0; + + for (;;) { + msleep(100); + + msr = ctrl_inb(EC3104_SER4_MSR); + + lsr = ctrl_inb(EC3104_SER4_LSR); + + if (lsr & LSR_DR) { + e5_receive(k); + continue; + } + + if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) { + if (k->cached_mcr & MCR_RTS) + printk("confused: RTS already high\n"); + /* CTS went high. Send RTS. */ + k->cached_mcr |= MCR_RTS; + + ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); + } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) { + /* CTS went low. */ + if (!(k->cached_mcr & MCR_RTS)) + printk("confused: RTS already low\n"); + + k->cached_mcr &= ~MCR_RTS; + + ctrl_outb(k->cached_mcr, EC3104_SER4_MCR); + } else + break; + + k->last_msr = msr; + + continue; + } +} + +void __init ec3104_kbd_init_hw(void) +{ + ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR); + ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR); + + ec3104_keyb_clear_state(); + + /* Ok, finally allocate the IRQ, and off we go.. */ + request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL); +} -- cgit v1.2.3