From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/ip2/i2lib.h | 351 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 351 insertions(+) create mode 100644 drivers/char/ip2/i2lib.h (limited to 'drivers/char/ip2/i2lib.h') diff --git a/drivers/char/ip2/i2lib.h b/drivers/char/ip2/i2lib.h new file mode 100644 index 00000000000..952e113ccd8 --- /dev/null +++ b/drivers/char/ip2/i2lib.h @@ -0,0 +1,351 @@ +/******************************************************************************* +* +* (c) 1998 by Computone Corporation +* +******************************************************************************** +* +* +* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Header file for high level library functions +* +*******************************************************************************/ +#ifndef I2LIB_H +#define I2LIB_H 1 +//------------------------------------------------------------------------------ +// I2LIB.H +// +// IntelliPort-II and IntelliPort-IIEX +// +// Defines, structure definitions, and external declarations for i2lib.c +//------------------------------------------------------------------------------ +//-------------------------------------- +// Mandatory Includes: +//-------------------------------------- +#include "ip2types.h" +#include "i2ellis.h" +#include "i2pack.h" +#include "i2cmd.h" +#include + +//------------------------------------------------------------------------------ +// i2ChanStr -- Channel Structure: +// Used to track per-channel information for the library routines using standard +// loadware. Note also, a pointer to an array of these structures is patched +// into the i2eBordStr (see i2ellis.h) +//------------------------------------------------------------------------------ +// +// If we make some limits on the maximum block sizes, we can avoid dealing with +// buffer wrap. The wrapping of the buffer is based on where the start of the +// packet is. Then there is always room for the packet contiguously. +// +// Maximum total length of an outgoing data or in-line command block. The limit +// of 36 on data is quite arbitrary and based more on DOS memory limitations +// than the board interface. However, for commands, the maximum packet length is +// MAX_CMD_PACK_SIZE, because the field size for the count is only a few bits +// (see I2PACK.H) in such packets. For data packets, the count field size is not +// the limiting factor. As of this writing, MAX_OBUF_BLOCK < MAX_CMD_PACK_SIZE, +// but be careful if wanting to modify either. +// +#define MAX_OBUF_BLOCK 36 + +// Another note on maximum block sizes: we are buffering packets here. Data is +// put into the buffer (if there is room) regardless of the credits from the +// board. The board sends new credits whenever it has removed from his buffers a +// number of characters equal to 80% of total buffer size. (Of course, the total +// buffer size is what is reported when the very first set of flow control +// status packets are received from the board. Therefore, to be robust, you must +// always fill the board to at least 80% of the current credit limit, else you +// might not give it enough to trigger a new report. These conditions are +// obtained here so long as the maximum output block size is less than 20% the +// size of the board's output buffers. This is true at present by "coincidence" +// or "infernal knowledge": the board's output buffers are at least 700 bytes +// long (20% = 140 bytes, at least). The 80% figure is "official", so the safest +// strategy might be to trap the first flow control report and guarantee that +// the effective maxObufBlock is the minimum of MAX_OBUF_BLOCK and 20% of first +// reported buffer credit. +// +#define MAX_CBUF_BLOCK 6 // Maximum total length of a bypass command block + +#define IBUF_SIZE 512 // character capacity of input buffer per channel +#define OBUF_SIZE 1024// character capacity of output buffer per channel +#define CBUF_SIZE 10 // character capacity of output bypass buffer + +typedef struct _i2ChanStr +{ + // First, back-pointers so that given a pointer to this structure, you can + // determine the correct board and channel number to reference, (say, when + // issuing commands, etc. (Note, channel number is in infl.hd.i2sChannel.) + + int port_index; // Index of port in channel structure array attached + // to board structure. + PTTY pTTY; // Pointer to tty structure for port (OS specific) + USHORT validity; // Indicates whether the given channel has been + // initialized, really exists (or is a missing + // channel, e.g. channel 9 on an 8-port box.) + + i2eBordStrPtr pMyBord; // Back-pointer to this channel's board structure + + int wopen; // waiting fer carrier + + int throttled; // Set if upper layer can take no data + + int flags; // Defined in tty.h + + PWAITQ open_wait; // Pointer for OS sleep function. + PWAITQ close_wait; // Pointer for OS sleep function. + PWAITQ delta_msr_wait;// Pointer for OS sleep function. + PWAITQ dss_now_wait; // Pointer for OS sleep function. + + struct timer_list BookmarkTimer; // Used by i2DrainOutput + wait_queue_head_t pBookmarkWait; // Used by i2DrainOutput + + int BaudBase; + int BaudDivisor; + + USHORT ClosingDelay; + USHORT ClosingWaitTime; + + volatile + flowIn infl; // This structure is initialized as a completely + // formed flow-control command packet, and as such + // has the channel number, also the capacity and + // "as-of" data needed continuously. + + USHORT sinceLastFlow; // Counts the number of characters read from input + // buffers, since the last time flow control info + // was sent. + + USHORT whenSendFlow; // Determines when new flow control is to be sent to + // the board. Note unlike earlier manifestations of + // the driver, these packets can be sent from + // in-place. + + USHORT channelNeeds; // Bit map of important things which must be done + // for this channel. (See bits below ) + + volatile + flowStat outfl; // Same type of structure is used to hold current + // flow control information used to control our + // output. "asof" is kept updated as data is sent, + // and "room" never goes to zero. + + // The incoming ring buffer + // Unlike the outgoing buffers, this holds raw data, not packets. The two + // extra bytes are used to hold the byte-padding when there is room for an + // odd number of bytes before we must wrap. + // + UCHAR Ibuf[IBUF_SIZE + 2]; + volatile + USHORT Ibuf_stuff; // Stuffing index + volatile + USHORT Ibuf_strip; // Stripping index + + // The outgoing ring-buffer: Holds Data and command packets. N.B., even + // though these are in the channel structure, the channel is also written + // here, the easier to send it to the fifo when ready. HOWEVER, individual + // packets here are NOT padded to even length: the routines for writing + // blocks to the fifo will pad to even byte counts. + // + UCHAR Obuf[OBUF_SIZE+MAX_OBUF_BLOCK+4]; + volatile + USHORT Obuf_stuff; // Stuffing index + volatile + USHORT Obuf_strip; // Stripping index + int Obuf_char_count; + + // The outgoing bypass-command buffer. Unlike earlier manifestations, the + // flow control packets are sent directly from the structures. As above, the + // channel number is included in the packet, but they are NOT padded to even + // size. + // + UCHAR Cbuf[CBUF_SIZE+MAX_CBUF_BLOCK+2]; + volatile + USHORT Cbuf_stuff; // Stuffing index + volatile + USHORT Cbuf_strip; // Stripping index + + // The temporary buffer for the Linux tty driver PutChar entry. + // + UCHAR Pbuf[MAX_OBUF_BLOCK - sizeof (i2DataHeader)]; + volatile + USHORT Pbuf_stuff; // Stuffing index + + // The state of incoming data-set signals + // + USHORT dataSetIn; // Bit-mapped according to below. Also indicates + // whether a break has been detected since last + // inquiry. + + // The state of outcoming data-set signals (as far as we can tell!) + // + USHORT dataSetOut; // Bit-mapped according to below. + + // Most recent hot-key identifier detected + // + USHORT hotKeyIn; // Hot key as sent by the board, HOT_CLEAR indicates + // no hot key detected since last examined. + + // Counter of outstanding requests for bookmarks + // + short bookMarks; // Number of outstanding bookmark requests, (+ive + // whenever a bookmark request if queued up, -ive + // whenever a bookmark is received). + + // Misc options + // + USHORT channelOptions; // See below + + // To store various incoming special packets + // + debugStat channelStatus; + cntStat channelRcount; + cntStat channelTcount; + failStat channelFail; + + // To store the last values for line characteristics we sent to the board. + // + int speed; + + int flush_flags; + + void (*trace)(unsigned short,unsigned char,unsigned char,unsigned long,...); + + /* + * Kernel counters for the 4 input interrupts + */ + struct async_icount icount; + + /* + * Task queues for processing input packets from the board. + */ + struct work_struct tqueue_input; + struct work_struct tqueue_status; + struct work_struct tqueue_hangup; + + rwlock_t Ibuf_spinlock; + rwlock_t Obuf_spinlock; + rwlock_t Cbuf_spinlock; + rwlock_t Pbuf_spinlock; + +} i2ChanStr, *i2ChanStrPtr; + +//--------------------------------------------------- +// Manifests and bit-maps for elements in i2ChanStr +//--------------------------------------------------- +// +// flush flags +// +#define STARTFL_FLAG 1 +#define STOPFL_FLAG 2 + +// validity +// +#define CHANNEL_MAGIC_BITS 0xff00 +#define CHANNEL_MAGIC 0x5300 // (validity & CHANNEL_MAGIC_BITS) == + // CHANNEL_MAGIC --> structure good + +#define CHANNEL_SUPPORT 0x0001 // Indicates channel is supported, exists, + // and passed P.O.S.T. + +// channelNeeds +// +#define NEED_FLOW 1 // Indicates flow control has been queued +#define NEED_INLINE 2 // Indicates inline commands or data queued +#define NEED_BYPASS 4 // Indicates bypass commands queued +#define NEED_CREDIT 8 // Indicates would be sending except has not sufficient + // credit. The data is still in the channel structure, + // but the channel is not enqueued in the board + // structure again until there is a credit received from + // the board. + +// dataSetIn (Also the bits for i2GetStatus return value) +// +#define I2_DCD 1 +#define I2_CTS 2 +#define I2_DSR 4 +#define I2_RI 8 + +// dataSetOut (Also the bits for i2GetStatus return value) +// +#define I2_DTR 1 +#define I2_RTS 2 + +// i2GetStatus() can optionally clear these bits +// +#define I2_BRK 0x10 // A break was detected +#define I2_PAR 0x20 // A parity error was received +#define I2_FRA 0x40 // A framing error was received +#define I2_OVR 0x80 // An overrun error was received + +// i2GetStatus() automatically clears these bits */ +// +#define I2_DDCD 0x100 // DCD changed from its former value +#define I2_DCTS 0x200 // CTS changed from its former value +#define I2_DDSR 0x400 // DSR changed from its former value +#define I2_DRI 0x800 // RI changed from its former value + +// hotKeyIn +// +#define HOT_CLEAR 0x1322 // Indicates that no hot-key has been detected + +// channelOptions +// +#define CO_NBLOCK_WRITE 1 // Writes don't block waiting for buffer. (Default + // is, they do wait.) + +// fcmodes +// +#define I2_OUTFLOW_CTS 0x0001 +#define I2_INFLOW_RTS 0x0002 +#define I2_INFLOW_DSR 0x0004 +#define I2_INFLOW_DTR 0x0008 +#define I2_OUTFLOW_DSR 0x0010 +#define I2_OUTFLOW_DTR 0x0020 +#define I2_OUTFLOW_XON 0x0040 +#define I2_OUTFLOW_XANY 0x0080 +#define I2_INFLOW_XON 0x0100 + +#define I2_CRTSCTS (I2_OUTFLOW_CTS|I2_INFLOW_RTS) +#define I2_IXANY_MODE (I2_OUTFLOW_XON|I2_OUTFLOW_XANY) + +//------------------------------------------- +// Macros used from user level like functions +//------------------------------------------- + +// Macros to set and clear channel options +// +#define i2SetOption(pCh, option) pCh->channelOptions |= option +#define i2ClrOption(pCh, option) pCh->channelOptions &= ~option + +// Macro to set fatal-error trap +// +#define i2SetFatalTrap(pB, routine) pB->i2eFatalTrap = routine + +//-------------------------------------------- +// Declarations and prototypes for i2lib.c +//-------------------------------------------- +// +static int i2InitChannels(i2eBordStrPtr, int, i2ChanStrPtr); +static int i2QueueCommands(int, i2ChanStrPtr, int, int, cmdSyntaxPtr,...); +static int i2GetStatus(i2ChanStrPtr, int); +static int i2Input(i2ChanStrPtr); +static int i2InputFlush(i2ChanStrPtr); +static int i2Output(i2ChanStrPtr, const char *, int, int); +static int i2OutputFree(i2ChanStrPtr); +static int i2ServiceBoard(i2eBordStrPtr); +static void i2DrainOutput(i2ChanStrPtr, int); + +#ifdef IP2DEBUG_TRACE +void ip2trace(unsigned short,unsigned char,unsigned char,unsigned long,...); +#else +#define ip2trace(a,b,c,d...) do {} while (0) +#endif + +// Argument to i2QueueCommands +// +#define C_IN_LINE 1 +#define C_BYPASS 0 + +#endif // I2LIB_H -- cgit v1.2.3