From 2621e2a155140b01c6ff57b3863cda2922c2c8bd Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Wed, 5 Jul 2006 01:20:51 +0000 Subject: [WATCHDOG] Kconfig typos fix. Three typos in drivers/char/watchdog/Kconfig... Signed-off-by: Matt LaPlante Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/char/watchdog/Kconfig') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index d53f664a4dd..fff89c2d88f 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -45,7 +45,7 @@ config WATCHDOG_NOWAYOUT comment "Watchdog Device Drivers" depends on WATCHDOG -# Architecture Independant +# Architecture Independent config SOFT_WATCHDOG tristate "Software watchdog" @@ -127,7 +127,7 @@ config S3C2410_WATCHDOG enabled. The driver is limited by the speed of the system's PCLK - signal, so with reasonbaly fast systems (PCLK around 50-66MHz) + signal, so with reasonably fast systems (PCLK around 50-66MHz) then watchdog intervals of over approximately 20seconds are unavailable. @@ -423,7 +423,7 @@ config SBC_EPX_C3_WATCHDOG is no way to know if writing to its IO address will corrupt your system or have any real effect. The only way to be sure that this driver does what you want is to make sure you - are runnning it on an EPX-C3 from Winsystems with the watchdog + are running it on an EPX-C3 from Winsystems with the watchdog timer at IO address 0x1ee and 0x1ef. It will write to both those IO ports. Basically, the assumption is made that if you compile this driver into your kernel and/or load it as a module, that you @@ -472,7 +472,7 @@ config INDYDOG tristate "Indy/I2 Hardware Watchdog" depends on WATCHDOG && SGI_IP22 help - Hardwaredriver for the Indy's/I2's watchdog. This is a + Hardware driver for the Indy's/I2's watchdog. This is a watchdog timer that will reboot the machine after a 60 second timer expired and no process has written to /dev/watchdog during that time. -- cgit v1.2.3