From b65b5b59f98aa317df399318b0b2770f50732d3c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 27 Jun 2006 02:54:05 -0700 Subject: [PATCH] stallion clean up There are two locking sets involved. One locks the board mappings and the other is the tty open/close locking. The low level code was clearly designed to be ported to OS's with spin locks already so pretty much comes out in the wash Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/stallion.c | 208 ++++++++++++++++++++---------------------------- 1 file changed, 86 insertions(+), 122 deletions(-) (limited to 'drivers/char') diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index a9c5a7230f8..bf361a5ba70 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -140,15 +140,6 @@ static char *stl_drvversion = "5.6.0"; static struct tty_driver *stl_serial; -/* - * We will need to allocate a temporary write buffer for chars that - * come direct from user space. The problem is that a copy from user - * space might cause a page fault (typically on a system that is - * swapping!). All ports will share one buffer - since if the system - * is already swapping a shared buffer won't make things any worse. - */ -static char *stl_tmpwritebuf; - /* * Define a local default termios struct. All ports will be created * with this termios initially. Basically all it defines is a raw port @@ -362,6 +353,14 @@ static unsigned char stl_vecmap[] = { 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03 }; +/* + * Lock ordering is that you may not take stallion_lock holding + * brd_lock. + */ + +static spinlock_t brd_lock; /* Guard the board mapping */ +static spinlock_t stallion_lock; /* Guard the tty driver */ + /* * Set up enable and disable macros for the ECH boards. They require * the secondary io address space to be activated and deactivated. @@ -725,17 +724,7 @@ static struct class *stallion_class; static int __init stallion_module_init(void) { - unsigned long flags; - -#ifdef DEBUG - printk("init_module()\n"); -#endif - - save_flags(flags); - cli(); stl_init(); - restore_flags(flags); - return 0; } @@ -746,7 +735,6 @@ static void __exit stallion_module_exit(void) stlbrd_t *brdp; stlpanel_t *panelp; stlport_t *portp; - unsigned long flags; int i, j, k; #ifdef DEBUG @@ -756,9 +744,6 @@ static void __exit stallion_module_exit(void) printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle, stl_drvversion); - save_flags(flags); - cli(); - /* * Free up all allocated resources used by the ports. This includes * memory and interrupts. As part of this process we will also do @@ -770,7 +755,6 @@ static void __exit stallion_module_exit(void) if (i) { printk("STALLION: failed to un-register tty driver, " "errno=%d\n", -i); - restore_flags(flags); return; } for (i = 0; i < 4; i++) { @@ -783,8 +767,6 @@ static void __exit stallion_module_exit(void) "errno=%d\n", -i); class_destroy(stallion_class); - kfree(stl_tmpwritebuf); - for (i = 0; (i < stl_nrbrds); i++) { if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL) continue; @@ -814,8 +796,6 @@ static void __exit stallion_module_exit(void) kfree(brdp); stl_brds[i] = (stlbrd_t *) NULL; } - - restore_flags(flags); } module_init(stallion_module_init); @@ -948,7 +928,7 @@ static stlbrd_t *stl_allocbrd(void) brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL); if (!brdp) { - printk("STALLION: failed to allocate memory (size=%d)\n", + printk("STALLION: failed to allocate memory (size=%Zd)\n", sizeof(stlbrd_t)); return NULL; } @@ -1066,16 +1046,17 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp) rc = 0; doclocal = 0; + spin_lock_irqsave(&stallion_lock, flags); + if (portp->tty->termios->c_cflag & CLOCAL) doclocal++; - save_flags(flags); - cli(); portp->openwaitcnt++; if (! tty_hung_up_p(filp)) portp->refcount--; for (;;) { + /* Takes brd_lock internally */ stl_setsignals(portp, 1, 1); if (tty_hung_up_p(filp) || ((portp->flags & ASYNC_INITIALIZED) == 0)) { @@ -1093,13 +1074,14 @@ static int stl_waitcarrier(stlport_t *portp, struct file *filp) rc = -ERESTARTSYS; break; } + /* FIXME */ interruptible_sleep_on(&portp->open_wait); } if (! tty_hung_up_p(filp)) portp->refcount++; portp->openwaitcnt--; - restore_flags(flags); + spin_unlock_irqrestore(&stallion_lock, flags); return rc; } @@ -1119,16 +1101,15 @@ static void stl_close(struct tty_struct *tty, struct file *filp) if (portp == (stlport_t *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&stallion_lock, flags); if (tty_hung_up_p(filp)) { - restore_flags(flags); + spin_unlock_irqrestore(&stallion_lock, flags); return; } if ((tty->count == 1) && (portp->refcount != 1)) portp->refcount = 1; if (portp->refcount-- > 1) { - restore_flags(flags); + spin_unlock_irqrestore(&stallion_lock, flags); return; } @@ -1142,11 +1123,18 @@ static void stl_close(struct tty_struct *tty, struct file *filp) * (The sc26198 has no "end-of-data" interrupt only empty FIFO) */ tty->closing = 1; + + spin_unlock_irqrestore(&stallion_lock, flags); + if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, portp->closing_wait); stl_waituntilsent(tty, (HZ / 2)); + + spin_lock_irqsave(&stallion_lock, flags); portp->flags &= ~ASYNC_INITIALIZED; + spin_unlock_irqrestore(&stallion_lock, flags); + stl_disableintrs(portp); if (tty->termios->c_cflag & HUPCL) stl_setsignals(portp, 0, 0); @@ -1173,7 +1161,6 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); wake_up_interruptible(&portp->close_wait); - restore_flags(flags); } /*****************************************************************************/ @@ -1195,9 +1182,6 @@ static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count (int) tty, (int) buf, count); #endif - if ((tty == (struct tty_struct *) NULL) || - (stl_tmpwritebuf == (char *) NULL)) - return 0; portp = tty->driver_data; if (portp == (stlport_t *) NULL) return 0; @@ -1302,11 +1286,6 @@ static void stl_flushchars(struct tty_struct *tty) if (portp->tx.buf == (char *) NULL) return; -#if 0 - if (tty->stopped || tty->hw_stopped || - (portp->tx.head == portp->tx.tail)) - return; -#endif stl_startrxtx(portp, -1, 1); } @@ -1977,12 +1956,14 @@ static int stl_eiointr(stlbrd_t *brdp) unsigned int iobase; int handled = 0; + spin_lock(&brd_lock); panelp = brdp->panels[0]; iobase = panelp->iobase; while (inb(brdp->iostatus) & EIO_INTRPEND) { handled = 1; (* panelp->isr)(panelp, iobase); } + spin_unlock(&brd_lock); return handled; } @@ -2168,7 +2149,7 @@ static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp) portp = kzalloc(sizeof(stlport_t), GFP_KERNEL); if (!portp) { printk("STALLION: failed to allocate memory " - "(size=%d)\n", sizeof(stlport_t)); + "(size=%Zd)\n", sizeof(stlport_t)); break; } @@ -2304,7 +2285,7 @@ static inline int stl_initeio(stlbrd_t *brdp) panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL); if (!panelp) { printk(KERN_WARNING "STALLION: failed to allocate memory " - "(size=%d)\n", sizeof(stlpanel_t)); + "(size=%Zd)\n", sizeof(stlpanel_t)); return -ENOMEM; } @@ -2478,7 +2459,7 @@ static inline int stl_initech(stlbrd_t *brdp) panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL); if (!panelp) { printk("STALLION: failed to allocate memory " - "(size=%d)\n", sizeof(stlpanel_t)); + "(size=%Zd)\n", sizeof(stlpanel_t)); break; } panelp->magic = STL_PANELMAGIC; @@ -2879,8 +2860,7 @@ static int stl_getportstats(stlport_t *portp, comstats_t __user *cp) portp->stats.lflags = 0; portp->stats.rxbuffered = 0; - save_flags(flags); - cli(); + spin_lock_irqsave(&stallion_lock, flags); if (portp->tty != (struct tty_struct *) NULL) { if (portp->tty->driver_data == portp) { portp->stats.ttystate = portp->tty->flags; @@ -2894,7 +2874,7 @@ static int stl_getportstats(stlport_t *portp, comstats_t __user *cp) } } } - restore_flags(flags); + spin_unlock_irqrestore(&stallion_lock, flags); head = portp->tx.head; tail = portp->tx.tail; @@ -3055,14 +3035,6 @@ static int __init stl_init(void) if (!stl_serial) return -1; -/* - * Allocate a temporary write buffer. - */ - stl_tmpwritebuf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); - if (!stl_tmpwritebuf) - printk("STALLION: failed to allocate memory (size=%d)\n", - STL_TXBUFSIZE); - /* * Set up a character driver for per board stuff. This is mainly used * to do stats ioctls on the ports. @@ -3147,11 +3119,13 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) unsigned int gfrcr; int chipmask, i, j; int nrchips, uartaddr, ioaddr; + unsigned long flags; #ifdef DEBUG printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp); #endif + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(panelp->brdnr, panelp->pagenr); /* @@ -3189,6 +3163,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) } BRDDISABLE(panelp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); return chipmask; } @@ -3200,6 +3175,7 @@ static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp) { + unsigned long flags; #ifdef DEBUG printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n", (int) brdp, (int) panelp, (int) portp); @@ -3209,6 +3185,7 @@ static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *po (portp == (stlport_t *) NULL)) return; + spin_lock_irqsave(&brd_lock, flags); portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) || (portp->portnr < 8)) ? 0 : EREG_BANKSIZE); portp->uartaddr = (portp->portnr & 0x04) << 5; @@ -3219,6 +3196,7 @@ static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *po stl_cd1400setreg(portp, LIVR, (portp->portnr << 3)); portp->hwid = stl_cd1400getreg(portp, GFRCR); BRDDISABLE(portp->brdnr); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3428,8 +3406,7 @@ static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp) tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3)); srer = stl_cd1400getreg(portp, SRER); @@ -3466,7 +3443,7 @@ static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp) portp->sigs &= ~TIOCM_CD; stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron)); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3492,8 +3469,7 @@ static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts) if (rts > 0) msvr2 = MSVR2_RTS; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); if (rts >= 0) @@ -3501,7 +3477,7 @@ static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts) if (dtr >= 0) stl_cd1400setreg(portp, MSVR1, msvr1); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3520,14 +3496,13 @@ static int stl_cd1400getsignals(stlport_t *portp) printk("stl_cd1400getsignals(portp=%x)\n", (int) portp); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); msvr1 = stl_cd1400getreg(portp, MSVR1); msvr2 = stl_cd1400getreg(portp, MSVR2); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); sigs = 0; sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0; @@ -3569,15 +3544,14 @@ static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx) else if (rx > 0) ccr |= CCR_RXENABLE; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); stl_cd1400ccrwait(portp); stl_cd1400setreg(portp, CCR, ccr); stl_cd1400ccrwait(portp); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3609,8 +3583,7 @@ static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx) else if (rx > 0) sreron |= SRER_RXDATA; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); stl_cd1400setreg(portp, SRER, @@ -3618,7 +3591,7 @@ static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx) BRDDISABLE(portp->brdnr); if (tx > 0) set_bit(ASYI_TXBUSY, &portp->istate); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3634,13 +3607,12 @@ static void stl_cd1400disableintrs(stlport_t *portp) #ifdef DEBUG printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); stl_cd1400setreg(portp, SRER, 0); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3653,8 +3625,7 @@ static void stl_cd1400sendbreak(stlport_t *portp, int len) printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); stl_cd1400setreg(portp, SRER, @@ -3664,7 +3635,7 @@ static void stl_cd1400sendbreak(stlport_t *portp, int len) portp->brklen = len; if (len == 1) portp->stats.txbreaks++; - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3688,8 +3659,7 @@ static void stl_cd1400flowctrl(stlport_t *portp, int state) if (tty == (struct tty_struct *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); @@ -3729,7 +3699,7 @@ static void stl_cd1400flowctrl(stlport_t *portp, int state) } BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3753,8 +3723,7 @@ static void stl_cd1400sendflow(stlport_t *portp, int state) if (tty == (struct tty_struct *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); if (state) { @@ -3769,7 +3738,7 @@ static void stl_cd1400sendflow(stlport_t *portp, int state) stl_cd1400ccrwait(portp); } BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3785,8 +3754,7 @@ static void stl_cd1400flush(stlport_t *portp) if (portp == (stlport_t *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); stl_cd1400ccrwait(portp); @@ -3794,7 +3762,7 @@ static void stl_cd1400flush(stlport_t *portp) stl_cd1400ccrwait(portp); portp->tx.tail = portp->tx.head; BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -3833,6 +3801,7 @@ static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase) (int) panelp, iobase); #endif + spin_lock(&brd_lock); outb(SVRR, iobase); svrtype = inb(iobase + EREG_DATA); if (panelp->nrports > 4) { @@ -3846,6 +3815,8 @@ static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase) stl_cd1400txisr(panelp, iobase); else if (svrtype & SVRR_MDM) stl_cd1400mdmisr(panelp, iobase); + + spin_unlock(&brd_lock); } /*****************************************************************************/ @@ -4433,8 +4404,7 @@ static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp) tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_sc26198setreg(portp, IMR, 0); stl_sc26198updatereg(portp, MR0, mr0); @@ -4461,7 +4431,7 @@ static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp) portp->imr = (portp->imr & ~imroff) | imron; stl_sc26198setreg(portp, IMR, portp->imr); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4491,13 +4461,12 @@ static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts) else if (rts > 0) iopioron |= IPR_RTS; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_sc26198setreg(portp, IOPIOR, ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron)); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4516,12 +4485,11 @@ static int stl_sc26198getsignals(stlport_t *portp) printk("stl_sc26198getsignals(portp=%x)\n", (int) portp); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); ipr = stl_sc26198getreg(portp, IPR); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); sigs = 0; sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD; @@ -4558,13 +4526,12 @@ static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx) else if (rx > 0) ccr |= CR_RXENABLE; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_sc26198setreg(portp, SCCR, ccr); BRDDISABLE(portp->brdnr); portp->crenable = ccr; - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4593,15 +4560,14 @@ static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx) else if (rx > 0) imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_sc26198setreg(portp, IMR, imr); BRDDISABLE(portp->brdnr); portp->imr = imr; if (tx > 0) set_bit(ASYI_TXBUSY, &portp->istate); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4618,13 +4584,12 @@ static void stl_sc26198disableintrs(stlport_t *portp) printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); portp->imr = 0; stl_sc26198setreg(portp, IMR, 0); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4637,8 +4602,7 @@ static void stl_sc26198sendbreak(stlport_t *portp, int len) printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len); #endif - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); if (len == 1) { stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK); @@ -4647,7 +4611,7 @@ static void stl_sc26198sendbreak(stlport_t *portp, int len) stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK); } BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4672,8 +4636,7 @@ static void stl_sc26198flowctrl(stlport_t *portp, int state) if (tty == (struct tty_struct *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); if (state) { @@ -4719,7 +4682,7 @@ static void stl_sc26198flowctrl(stlport_t *portp, int state) } BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4744,8 +4707,7 @@ static void stl_sc26198sendflow(stlport_t *portp, int state) if (tty == (struct tty_struct *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); if (state) { mr0 = stl_sc26198getreg(portp, MR0); @@ -4765,7 +4727,7 @@ static void stl_sc26198sendflow(stlport_t *portp, int state) stl_sc26198setreg(portp, MR0, mr0); } BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4781,14 +4743,13 @@ static void stl_sc26198flush(stlport_t *portp) if (portp == (stlport_t *) NULL) return; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); stl_sc26198setreg(portp, SCCR, CR_TXRESET); stl_sc26198setreg(portp, SCCR, portp->crenable); BRDDISABLE(portp->brdnr); portp->tx.tail = portp->tx.head; - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); } /*****************************************************************************/ @@ -4815,12 +4776,11 @@ static int stl_sc26198datastate(stlport_t *portp) if (test_bit(ASYI_TXBUSY, &portp->istate)) return 1; - save_flags(flags); - cli(); + spin_lock_irqsave(&brd_lock, flags); BRDENABLE(portp->brdnr, portp->pagenr); sr = stl_sc26198getreg(portp, SR); BRDDISABLE(portp->brdnr); - restore_flags(flags); + spin_unlock_irqrestore(&brd_lock, flags); return (sr & SR_TXEMPTY) ? 0 : 1; } @@ -4878,6 +4838,8 @@ static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase) stlport_t *portp; unsigned int iack; + spin_lock(&brd_lock); + /* * Work around bug in sc26198 chip... Cannot have A6 address * line of UART high, else iack will be returned as 0. @@ -4893,6 +4855,8 @@ static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase) stl_sc26198txisr(portp); else stl_sc26198otherisr(portp, iack); + + spin_unlock(&brd_lock); } /*****************************************************************************/ -- cgit v1.2.3