From 1318952514d5651c453d89989595a9df3b37267b Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Fri, 30 Jun 2006 01:56:08 -0700 Subject: [PATCH] EDAC: probe1 cleanup 1-of-2 - Add lower-level functions that handle various parts of the initialization done by the xxx_probe1() functions. Some of the xxx_probe1() functions are much too long and complicated (see "Chapter 5: Functions" in Documentation/CodingStyle). - Cleanup of probe1() functions in EDAC Signed-off-by: Doug Thompson Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i82875p_edac.c | 188 +++++++++++++++++++++++++------------------- 1 file changed, 109 insertions(+), 79 deletions(-) (limited to 'drivers/edac/i82875p_edac.c') diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index 2be18ca9640..6787403463a 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -265,116 +265,109 @@ static void i82875p_check(struct mem_ctl_info *mci) extern int pci_proc_attach_device(struct pci_dev *); #endif -static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) +/* Return 0 on success or 1 on failure. */ +static int i82875p_setup_overfl_dev(struct pci_dev *pdev, + struct pci_dev **ovrfl_pdev, void __iomem **ovrfl_window) { - int rc = -ENODEV; - int index; - struct mem_ctl_info *mci = NULL; - struct i82875p_pvt *pvt = NULL; - unsigned long last_cumul_size; - struct pci_dev *ovrfl_pdev; - void __iomem *ovrfl_window = NULL; - u32 drc; - u32 drc_chan; /* Number of channels 0=1chan,1=2chan */ - u32 nr_chans; - u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ - struct i82875p_error_info discard; + struct pci_dev *dev; + void __iomem *window; - debugf0("%s()\n", __func__); - ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); + *ovrfl_pdev = NULL; + *ovrfl_window = NULL; + dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); - if (!ovrfl_pdev) { - /* - * Intel tells BIOS developers to hide device 6 which + if (dev == NULL) { + /* Intel tells BIOS developers to hide device 6 which * configures the overflow device access containing * the DRBs - this is where we expose device 6. * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm */ pci_write_bits8(pdev, 0xf4, 0x2, 0x2); - ovrfl_pdev = - pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); + dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); - if (!ovrfl_pdev) - return -ENODEV; + if (dev == NULL) + return 1; } + *ovrfl_pdev = dev; + #ifdef CONFIG_PROC_FS - if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) { - i82875p_printk(KERN_ERR, - "%s(): Failed to attach overflow device\n", __func__); - return -ENODEV; + if ((dev->procent == NULL) && pci_proc_attach_device(dev)) { + i82875p_printk(KERN_ERR, "%s(): Failed to attach overflow " + "device\n", __func__); + return 1; } -#endif - /* CONFIG_PROC_FS */ - if (pci_enable_device(ovrfl_pdev)) { - i82875p_printk(KERN_ERR, - "%s(): Failed to enable overflow device\n", __func__); - return -ENODEV; +#endif /* CONFIG_PROC_FS */ + if (pci_enable_device(dev)) { + i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow " + "device\n", __func__); + return 1; } - if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) { + if (pci_request_regions(dev, pci_name(dev))) { #ifdef CORRECT_BIOS goto fail0; #endif } /* cache is irrelevant for PCI bus reads/writes */ - ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0), - pci_resource_len(ovrfl_pdev, 0)); + window = ioremap_nocache(pci_resource_start(dev, 0), + pci_resource_len(dev, 0)); - if (!ovrfl_window) { + if (window == NULL) { i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n", - __func__); + __func__); goto fail1; } - /* need to find out the number of channels */ - drc = readl(ovrfl_window + I82875P_DRC); - drc_chan = ((drc >> 21) & 0x1); - nr_chans = drc_chan + 1; + *ovrfl_window = window; + return 0; - drc_ddim = (drc >> 18) & 0x1; - mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans), - nr_chans); +fail1: + pci_release_regions(dev); - if (!mci) { - rc = -ENOMEM; - goto fail2; - } +#ifdef CORRECT_BIOS +fail0: + pci_disable_device(dev); +#endif + /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ + return 1; +} - debugf3("%s(): init mci\n", __func__); - mci->dev = &pdev->dev; - mci->mtype_cap = MEM_FLAG_DDR; - mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; - mci->edac_cap = EDAC_FLAG_UNKNOWN; - /* adjust FLAGS */ - mci->mod_name = EDAC_MOD_STR; - mci->mod_ver = I82875P_REVISION; - mci->ctl_name = i82875p_devs[dev_idx].ctl_name; - mci->edac_check = i82875p_check; - mci->ctl_page_to_phys = NULL; - debugf3("%s(): init pvt\n", __func__); - pvt = (struct i82875p_pvt *) mci->pvt_info; - pvt->ovrfl_pdev = ovrfl_pdev; - pvt->ovrfl_window = ovrfl_window; +/* Return 1 if dual channel mode is active. Else return 0. */ +static inline int dual_channel_active(u32 drc) +{ + return (drc >> 21) & 0x1; +} - /* - * The dram row boundary (DRB) reg values are boundary address + +static void i82875p_init_csrows(struct mem_ctl_info *mci, + struct pci_dev *pdev, void __iomem *ovrfl_window, u32 drc) +{ + struct csrow_info *csrow; + unsigned long last_cumul_size; + u8 value; + u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ + u32 cumul_size; + int index; + + drc_ddim = (drc >> 18) & 0x1; + last_cumul_size = 0; + + /* The dram row boundary (DRB) reg values are boundary address * for each DRAM row with a granularity of 32 or 64MB (single/dual * channel operation). DRB regs are cumulative; therefore DRB7 will * contain the total memory contained in all eight rows. */ - for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { - u8 value; - u32 cumul_size; - struct csrow_info *csrow = &mci->csrows[index]; + + for (index = 0; index < mci->nr_csrows; index++) { + csrow = &mci->csrows[index]; value = readb(ovrfl_window + I82875P_DRB + index); cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT); debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, cumul_size); - if (cumul_size == last_cumul_size) continue; /* not populated */ @@ -382,12 +375,54 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) csrow->last_page = cumul_size - 1; csrow->nr_pages = cumul_size - last_cumul_size; last_cumul_size = cumul_size; - csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ + csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ csrow->mtype = MEM_DDR; csrow->dtype = DEV_UNKNOWN; csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE; } +} + +static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + struct mem_ctl_info *mci; + struct i82875p_pvt *pvt; + struct pci_dev *ovrfl_pdev; + void __iomem *ovrfl_window; + u32 drc; + u32 nr_chans; + struct i82875p_error_info discard; + + debugf0("%s()\n", __func__); + ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); + + if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window)) + return -ENODEV; + drc = readl(ovrfl_window + I82875P_DRC); + nr_chans = dual_channel_active(drc) + 1; + mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans), + nr_chans); + + if (!mci) { + rc = -ENOMEM; + goto fail0; + } + debugf3("%s(): init mci\n", __func__); + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_UNKNOWN; + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = I82875P_REVISION; + mci->ctl_name = i82875p_devs[dev_idx].ctl_name; + mci->edac_check = i82875p_check; + mci->ctl_page_to_phys = NULL; + debugf3("%s(): init pvt\n", __func__); + pvt = (struct i82875p_pvt *) mci->pvt_info; + pvt->ovrfl_pdev = ovrfl_pdev; + pvt->ovrfl_window = ovrfl_window; + i82875p_init_csrows(mci, pdev, ovrfl_window, drc); i82875p_get_error_info(mci, &discard); /* clear counters */ /* Here we assume that we will never see multiple instances of this @@ -395,25 +430,20 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) */ if (edac_mc_add_mc(mci,0)) { debugf3("%s(): failed edac_mc_add_mc()\n", __func__); - goto fail3; + goto fail1; } /* get this far and it's successful */ debugf3("%s(): success\n", __func__); return 0; -fail3: +fail1: edac_mc_free(mci); -fail2: +fail0: iounmap(ovrfl_window); - -fail1: pci_release_regions(ovrfl_pdev); -#ifdef CORRECT_BIOS -fail0: -#endif pci_disable_device(ovrfl_pdev); /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ return rc; -- cgit v1.2.3