From 23b2d4778ad33ee6bfe60439fb73c16580f204f2 Mon Sep 17 00:00:00 2001 From: Nate Case Date: Fri, 17 Oct 2008 17:51:10 +0200 Subject: hwmon: (lm90) Support ADT7461 in extended mode Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: Nate Case Signed-off-by: Jean Delvare Tested-by: Martyn Welch --- drivers/hwmon/Kconfig | 7 +-- drivers/hwmon/lm90.c | 120 ++++++++++++++++++++++++++++++++++++++------------ 2 files changed, 95 insertions(+), 32 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index ebacc0af40f..96701e099e8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -510,11 +510,8 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657, - MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. + LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim + MAX6657, MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index b2d9b3f0946..fe5d860fc83 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -37,11 +37,10 @@ * chips. The MAX6680 and MAX6681 only differ in the pinout so they can * be treated identically. * - * This driver also supports the ADT7461 chip from Analog Devices but - * only in its "compatability mode". If an ADT7461 chip is found but - * is configured in non-compatible mode (where its temperature - * register values are decoded differently) it is ignored by this - * driver. + * This driver also supports the ADT7461 chip from Analog Devices. + * It's supported in both compatibility and extended mode. It is mostly + * compatible with LM90 except for a data format difference for the + * temperature value registers. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -137,6 +136,11 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); #define MAX6657_REG_R_LOCAL_TEMPL 0x11 +/* + * Device flags + */ +#define LM90_FLAG_ADT7461_EXT 0x01 /* ADT7461 extended mode */ + /* * Functions declaration */ @@ -191,6 +195,7 @@ struct lm90_data { char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int kind; + int flags; /* registers values */ s8 temp8[4]; /* 0: local low limit @@ -256,26 +261,61 @@ static u8 hyst_to_reg(long val) } /* - * ADT7461 is almost identical to LM90 except that attempts to write - * values that are outside the range 0 < temp < 127 are treated as - * the boundary value. + * ADT7461 in compatibility mode is almost identical to LM90 except that + * attempts to write values that are outside the range 0 < temp < 127 are + * treated as the boundary value. + * + * ADT7461 in "extended mode" operation uses unsigned integers offset by + * 64 (e.g., 0 -> -64 degC). The range is restricted to -64..191 degC. */ -static u8 temp1_to_reg_adt7461(long val) +static inline int temp1_from_reg_adt7461(struct lm90_data *data, u8 val) { - if (val <= 0) - return 0; - if (val >= 127000) - return 127; - return (val + 500) / 1000; + if (data->flags & LM90_FLAG_ADT7461_EXT) + return (val - 64) * 1000; + else + return temp1_from_reg(val); } -static u16 temp2_to_reg_adt7461(long val) +static inline int temp2_from_reg_adt7461(struct lm90_data *data, u16 val) { - if (val <= 0) - return 0; - if (val >= 127750) - return 0x7FC0; - return (val + 125) / 250 * 64; + if (data->flags & LM90_FLAG_ADT7461_EXT) + return (val - 0x4000) / 64 * 250; + else + return temp2_from_reg(val); +} + +static u8 temp1_to_reg_adt7461(struct lm90_data *data, long val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) { + if (val <= -64000) + return 0; + if (val >= 191000) + return 0xFF; + return (val + 500 + 64000) / 1000; + } else { + if (val <= 0) + return 0; + if (val >= 127000) + return 127; + return (val + 500) / 1000; + } +} + +static u16 temp2_to_reg_adt7461(struct lm90_data *data, long val) +{ + if (data->flags & LM90_FLAG_ADT7461_EXT) { + if (val <= -64000) + return 0; + if (val >= 191750) + return 0xFFC0; + return (val + 64000 + 125) / 250 * 64; + } else { + if (val <= 0) + return 0; + if (val >= 127750) + return 0x7FC0; + return (val + 125) / 250 * 64; + } } /* @@ -287,7 +327,14 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", temp1_from_reg(data->temp8[attr->index])); + int temp; + + if (data->kind == adt7461) + temp = temp1_from_reg_adt7461(data, data->temp8[attr->index]); + else + temp = temp1_from_reg(data->temp8[attr->index]); + + return sprintf(buf, "%d\n", temp); } static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, @@ -308,7 +355,7 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); if (data->kind == adt7461) - data->temp8[nr] = temp1_to_reg_adt7461(val); + data->temp8[nr] = temp1_to_reg_adt7461(data, val); else data->temp8[nr] = temp1_to_reg(val); i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); @@ -321,7 +368,14 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", temp2_from_reg(data->temp11[attr->index])); + int temp; + + if (data->kind == adt7461) + temp = temp2_from_reg_adt7461(data, data->temp11[attr->index]); + else + temp = temp2_from_reg(data->temp11[attr->index]); + + return sprintf(buf, "%d\n", temp); } static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, @@ -344,7 +398,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); if (data->kind == adt7461) - data->temp11[nr] = temp2_to_reg_adt7461(val); + data->temp11[nr] = temp2_to_reg_adt7461(data, val); else if (data->kind == max6657 || data->kind == max6680) data->temp11[nr] = temp1_to_reg(val) << 8; else @@ -364,8 +418,14 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", temp1_from_reg(data->temp8[attr->index]) - - temp1_from_reg(data->temp_hyst)); + int temp; + + if (data->kind == adt7461) + temp = temp1_from_reg_adt7461(data, data->temp8[attr->index]); + else + temp = temp1_from_reg(data->temp8[attr->index]); + + return sprintf(buf, "%d\n", temp - temp1_from_reg(data->temp_hyst)); } static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, @@ -598,7 +658,7 @@ static int lm90_detect(struct i2c_client *new_client, int kind, kind = adm1032; } else if (chip_id == 0x51 /* ADT7461 */ - && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ + && (reg_config1 & 0x1B) == 0x00 && reg_convrate <= 0x0A) { kind = adt7461; } @@ -737,6 +797,12 @@ static void lm90_init_client(struct i2c_client *client) } config_orig = config; + /* Check Temperature Range Select */ + if (data->kind == adt7461) { + if (config & 0x04) + data->flags |= LM90_FLAG_ADT7461_EXT; + } + /* * Put MAX6680/MAX8881 into extended resolution (bit 0x10, * 0.125 degree resolution) and range (0x08, extend range -- cgit v1.2.3