From 28f74e71775b1ae0ebf7fe87f7a7f39ecb77a2b8 Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Sat, 18 Oct 2008 20:27:30 -0700 Subject: hwmon/pc87360 separate alarm files: define some constants Bring hwmon/pc87360 into agreement with Documentation/hwmon/sysfs-interface. Patchset adds separate limit alarms for voltages and temps, it also adds temp[123]_fault files. On my Soekris, temps 1,2 are unused/unconnected, so temp[123]_fault = 1,1,0 respectively. This agrees with /usr/bin/sensors, which has always shown them as OPEN. Temps 4,5,6 are thermistor based, and dont have a fault bit in their status register. This patch: 2 different kinds of constants added: - CHAN_ALM_* constants for (later) vin, temp alarm callbacks. - CHAN_* conversion constants, used in _init_device, partly for RW1C bits Signed-off-by: Jim Cromie Cc: Jean Delvare Cc: "Mark M. Hoffman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/pc87360.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 9b462bb13fa..1043b116bde 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -489,6 +489,11 @@ static struct sensor_device_attribute in_max[] = { SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10), }; +/* (temp & vin) channel status register alarm bits (pdf sec.11.5.12) */ +#define CHAN_ALM_MIN 0x02 /* min limit crossed */ +#define CHAN_ALM_MAX 0x04 /* max limit exceeded */ +#define TEMP_ALM_CRIT 0x08 /* temp crit exceeded (temp only) */ + #define VIN_UNIT_ATTRS(X) \ &in_input[X].dev_attr.attr, \ &in_status[X].dev_attr.attr, \ @@ -1131,6 +1136,12 @@ static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, mutex_unlock(&(data->lock)); } +/* (temp & vin) channel conversion status register flags (pdf sec.11.5.12) */ +#define CHAN_CNVRTD 0x80 /* new data ready */ +#define CHAN_ENA 0x01 /* enabled channel (temp or vin) */ +#define CHAN_ALM_ENA 0x10 /* propagate to alarms-reg ?? (chk val!) */ +#define CHAN_READY (CHAN_ENA|CHAN_CNVRTD) /* sample ready mask */ + static void pc87360_init_device(struct platform_device *pdev, int use_thermistors) { @@ -1156,7 +1167,7 @@ static void pc87360_init_device(struct platform_device *pdev, /* Forcibly enable voltage channel */ reg = pc87360_read_value(data, LD_IN, i, PC87365_REG_IN_STATUS); - if (!(reg & 0x01)) { + if (!(reg & CHAN_ENA)) { dev_dbg(&pdev->dev, "Forcibly " "enabling in%d\n", i); pc87360_write_value(data, LD_IN, i, @@ -1171,7 +1182,7 @@ static void pc87360_init_device(struct platform_device *pdev, for (i = 11; i < data->innr; i++) { reg = pc87360_read_value(data, LD_IN, i, PC87365_REG_TEMP_STATUS); - use_thermistors = use_thermistors || (reg & 0x01); + use_thermistors = use_thermistors || (reg & CHAN_ENA); } i = use_thermistors ? 2 : 0; @@ -1180,7 +1191,7 @@ static void pc87360_init_device(struct platform_device *pdev, /* Forcibly enable temperature channel */ reg = pc87360_read_value(data, LD_TEMP, i, PC87365_REG_TEMP_STATUS); - if (!(reg & 0x01)) { + if (!(reg & CHAN_ENA)) { dev_dbg(&pdev->dev, "Forcibly " "enabling temp%d\n", i+1); pc87360_write_value(data, LD_TEMP, i, @@ -1197,7 +1208,7 @@ static void pc87360_init_device(struct platform_device *pdev, diodes */ reg = pc87360_read_value(data, LD_TEMP, (i-11)/2, PC87365_REG_TEMP_STATUS); - if (reg & 0x01) { + if (reg & CHAN_ENA) { dev_dbg(&pdev->dev, "Skipping " "temp%d, pin already in use " "by temp%d\n", i-7, (i-11)/2); @@ -1207,7 +1218,7 @@ static void pc87360_init_device(struct platform_device *pdev, /* Forcibly enable thermistor channel */ reg = pc87360_read_value(data, LD_IN, i, PC87365_REG_IN_STATUS); - if (!(reg & 0x01)) { + if (!(reg & CHAN_ENA)) { dev_dbg(&pdev->dev, "Forcibly " "enabling temp%d\n", i-7); pc87360_write_value(data, LD_IN, i, @@ -1221,7 +1232,7 @@ static void pc87360_init_device(struct platform_device *pdev, if (data->innr) { reg = pc87360_read_value(data, LD_IN, NO_BANK, PC87365_REG_IN_CONFIG); - if (reg & 0x01) { + if (reg & CHAN_ENA) { dev_dbg(&pdev->dev, "Forcibly " "enabling monitoring (VLM)\n"); pc87360_write_value(data, LD_IN, NO_BANK, @@ -1233,7 +1244,7 @@ static void pc87360_init_device(struct platform_device *pdev, if (data->tempnr) { reg = pc87360_read_value(data, LD_TEMP, NO_BANK, PC87365_REG_TEMP_CONFIG); - if (reg & 0x01) { + if (reg & CHAN_ENA) { dev_dbg(&pdev->dev, "Forcibly enabling " "monitoring (TMS)\n"); pc87360_write_value(data, LD_TEMP, NO_BANK, @@ -1336,11 +1347,11 @@ static struct pc87360_data *pc87360_update_device(struct device *dev) pc87360_write_value(data, LD_IN, i, PC87365_REG_IN_STATUS, data->in_status[i]); - if ((data->in_status[i] & 0x81) == 0x81) { + if ((data->in_status[i] & CHAN_READY) == CHAN_READY) { data->in[i] = pc87360_read_value(data, LD_IN, i, PC87365_REG_IN); } - if (data->in_status[i] & 0x01) { + if (data->in_status[i] & CHAN_ENA) { data->in_min[i] = pc87360_read_value(data, LD_IN, i, PC87365_REG_IN_MIN); @@ -1373,12 +1384,12 @@ static struct pc87360_data *pc87360_update_device(struct device *dev) pc87360_write_value(data, LD_TEMP, i, PC87365_REG_TEMP_STATUS, data->temp_status[i]); - if ((data->temp_status[i] & 0x81) == 0x81) { + if ((data->temp_status[i] & CHAN_READY) == CHAN_READY) { data->temp[i] = pc87360_read_value(data, LD_TEMP, i, PC87365_REG_TEMP); } - if (data->temp_status[i] & 0x01) { + if (data->temp_status[i] & CHAN_ENA) { data->temp_min[i] = pc87360_read_value(data, LD_TEMP, i, PC87365_REG_TEMP_MIN); -- cgit v1.2.3