From d1bf8cf6b911001d50f2079c158cb5dd9782e187 Mon Sep 17 00:00:00 2001 From: Ken Milmore Date: Tue, 11 May 2010 09:17:46 +0200 Subject: hwmon: (asc7621) Bug fixes * Allow fan minimum RPM to be set to zero without triggering alarms. * Fix voltage scaling arithmetic and correct scale factors. * Correct fan1-fan4 alarm bit shifts. * Correct register address for temp3_smoothing_enable. * Read the alarm registers with high priority. Signed-off-by: Ken Milmore Signed-off-by: Jean Delvare --- drivers/hwmon/asc7621.c | 63 ++++++++++++++++++++++++------------------------- 1 file changed, 31 insertions(+), 32 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c index 7f948105d8a..0f388adc618 100644 --- a/drivers/hwmon/asc7621.c +++ b/drivers/hwmon/asc7621.c @@ -268,8 +268,11 @@ static ssize_t store_fan16(struct device *dev, if (strict_strtol(buf, 10, &reqval)) return -EINVAL; + /* If a minimum RPM of zero is requested, then we set the register to + 0xffff. This value allows the fan to be stopped completely without + generating an alarm. */ reqval = - (SENSORS_LIMIT((reqval) <= 0 ? 0 : 5400000 / (reqval), 0, 65534)); + (reqval <= 0 ? 0xffff : SENSORS_LIMIT(5400000 / reqval, 0, 0xfffe)); mutex_lock(&data->update_lock); data->reg[param->msb[0]] = (reqval >> 8) & 0xff; @@ -285,8 +288,9 @@ static ssize_t store_fan16(struct device *dev, * Voltages are scaled in the device so that the nominal voltage * is 3/4ths of the 0-255 range (i.e. 192). * If all voltages are 'normal' then all voltage registers will - * read 0xC0. This doesn't help us if we don't have a point of refernce. - * The data sheet however provides us with the full scale value for each + * read 0xC0. + * + * The data sheet provides us with the 3/4 scale value for each voltage * which is stored in in_scaling. The sda->index parameter value provides * the index into in_scaling. * @@ -295,7 +299,7 @@ static ssize_t store_fan16(struct device *dev, */ static int asc7621_in_scaling[] = { - 3320, 3000, 4380, 6640, 16000 + 2500, 2250, 3300, 5000, 12000 }; static ssize_t show_in10(struct device *dev, struct device_attribute *attr, @@ -306,19 +310,12 @@ static ssize_t show_in10(struct device *dev, struct device_attribute *attr, u8 nr = sda->index; mutex_lock(&data->update_lock); - regval = (data->reg[param->msb[0]] * asc7621_in_scaling[nr]) / 256; - - /* The LSB value is a 2-bit scaling of the MSB's LSbit value. - * I.E. If the maximim voltage for this input is 6640 millivolts then - * a MSB register value of 0 = 0mv and 255 = 6640mv. - * A 1 step change therefore represents 25.9mv (6640 / 256). - * The extra 2-bits therefore represent increments of 6.48mv. - */ - regval += ((asc7621_in_scaling[nr] / 256) / 4) * - (data->reg[param->lsb[0]] >> 6); - + regval = (data->reg[param->msb[0]] << 8) | (data->reg[param->lsb[0]]); mutex_unlock(&data->update_lock); + /* The LSB value is a 2-bit scaling of the MSB's LSbit value. */ + regval = (regval >> 6) * asc7621_in_scaling[nr] / (0xc0 << 2); + return sprintf(buf, "%u\n", regval); } @@ -331,7 +328,7 @@ static ssize_t show_in8(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%u\n", ((data->reg[param->msb[0]] * - asc7621_in_scaling[nr]) / 256)); + asc7621_in_scaling[nr]) / 0xc0)); } static ssize_t store_in8(struct device *dev, struct device_attribute *attr, @@ -344,9 +341,11 @@ static ssize_t store_in8(struct device *dev, struct device_attribute *attr, if (strict_strtol(buf, 10, &reqval)) return -EINVAL; - reqval = SENSORS_LIMIT(reqval, 0, asc7621_in_scaling[nr]); + reqval = SENSORS_LIMIT(reqval, 0, 0xffff); + + reqval = reqval * 0xc0 / asc7621_in_scaling[nr]; - reqval = (reqval * 255 + 128) / asc7621_in_scaling[nr]; + reqval = SENSORS_LIMIT(reqval, 0, 0xff); mutex_lock(&data->update_lock); data->reg[param->msb[0]] = reqval; @@ -846,11 +845,11 @@ static struct asc7621_param asc7621_params[] = { PWRITE(in3_max, 3, PRI_LOW, 0x4b, 0, 0, 0, in8), PWRITE(in4_max, 4, PRI_LOW, 0x4d, 0, 0, 0, in8), - PREAD(in0_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 0, bitmask), - PREAD(in1_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 1, bitmask), - PREAD(in2_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 2, bitmask), - PREAD(in3_alarm, 3, PRI_LOW, 0x41, 0, 0x01, 3, bitmask), - PREAD(in4_alarm, 4, PRI_LOW, 0x42, 0, 0x01, 0, bitmask), + PREAD(in0_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 0, bitmask), + PREAD(in1_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 1, bitmask), + PREAD(in2_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 2, bitmask), + PREAD(in3_alarm, 3, PRI_HIGH, 0x41, 0, 0x01, 3, bitmask), + PREAD(in4_alarm, 4, PRI_HIGH, 0x42, 0, 0x01, 0, bitmask), PREAD(fan1_input, 0, PRI_HIGH, 0x29, 0x28, 0, 0, fan16), PREAD(fan2_input, 1, PRI_HIGH, 0x2b, 0x2a, 0, 0, fan16), @@ -862,10 +861,10 @@ static struct asc7621_param asc7621_params[] = { PWRITE(fan3_min, 2, PRI_LOW, 0x59, 0x58, 0, 0, fan16), PWRITE(fan4_min, 3, PRI_LOW, 0x5b, 0x5a, 0, 0, fan16), - PREAD(fan1_alarm, 0, PRI_LOW, 0x42, 0, 0x01, 0, bitmask), - PREAD(fan2_alarm, 1, PRI_LOW, 0x42, 0, 0x01, 1, bitmask), - PREAD(fan3_alarm, 2, PRI_LOW, 0x42, 0, 0x01, 2, bitmask), - PREAD(fan4_alarm, 3, PRI_LOW, 0x42, 0, 0x01, 3, bitmask), + PREAD(fan1_alarm, 0, PRI_HIGH, 0x42, 0, 0x01, 2, bitmask), + PREAD(fan2_alarm, 1, PRI_HIGH, 0x42, 0, 0x01, 3, bitmask), + PREAD(fan3_alarm, 2, PRI_HIGH, 0x42, 0, 0x01, 4, bitmask), + PREAD(fan4_alarm, 3, PRI_HIGH, 0x42, 0, 0x01, 5, bitmask), PREAD(temp1_input, 0, PRI_HIGH, 0x25, 0x10, 0, 0, temp10), PREAD(temp2_input, 1, PRI_HIGH, 0x26, 0x15, 0, 0, temp10), @@ -886,10 +885,10 @@ static struct asc7621_param asc7621_params[] = { PWRITE(temp3_max, 2, PRI_LOW, 0x53, 0, 0, 0, temp8), PWRITE(temp4_max, 3, PRI_LOW, 0x35, 0, 0, 0, temp8), - PREAD(temp1_alarm, 0, PRI_LOW, 0x41, 0, 0x01, 4, bitmask), - PREAD(temp2_alarm, 1, PRI_LOW, 0x41, 0, 0x01, 5, bitmask), - PREAD(temp3_alarm, 2, PRI_LOW, 0x41, 0, 0x01, 6, bitmask), - PREAD(temp4_alarm, 3, PRI_LOW, 0x43, 0, 0x01, 0, bitmask), + PREAD(temp1_alarm, 0, PRI_HIGH, 0x41, 0, 0x01, 4, bitmask), + PREAD(temp2_alarm, 1, PRI_HIGH, 0x41, 0, 0x01, 5, bitmask), + PREAD(temp3_alarm, 2, PRI_HIGH, 0x41, 0, 0x01, 6, bitmask), + PREAD(temp4_alarm, 3, PRI_HIGH, 0x43, 0, 0x01, 0, bitmask), PWRITE(temp1_source, 0, PRI_LOW, 0x02, 0, 0x07, 4, bitmask), PWRITE(temp2_source, 1, PRI_LOW, 0x02, 0, 0x07, 0, bitmask), @@ -898,7 +897,7 @@ static struct asc7621_param asc7621_params[] = { PWRITE(temp1_smoothing_enable, 0, PRI_LOW, 0x62, 0, 0x01, 3, bitmask), PWRITE(temp2_smoothing_enable, 1, PRI_LOW, 0x63, 0, 0x01, 7, bitmask), - PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x64, 0, 0x01, 3, bitmask), + PWRITE(temp3_smoothing_enable, 2, PRI_LOW, 0x63, 0, 0x01, 3, bitmask), PWRITE(temp4_smoothing_enable, 3, PRI_LOW, 0x3c, 0, 0x01, 3, bitmask), PWRITE(temp1_smoothing_time, 0, PRI_LOW, 0x62, 0, 0x07, 0, temp_st), -- cgit v1.2.3 From 0559a538899d48e7d730affb9df2abb13a7d9008 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 11 May 2010 09:17:47 +0200 Subject: hwmon: (applesmc) Correct sysfs fan error handling The current code will not remove the sysfs files for fan numbers three and up. Also, upon exit, fans one and two are removed regardless of their existence. This patch cleans up the sysfs error handling for the fans. Signed-off-by: Henrik Rydberg Signed-off-by: Jean Delvare --- drivers/hwmon/applesmc.c | 61 ++++++++++++++++++++---------------------------- 1 file changed, 25 insertions(+), 36 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 0f28d91f29d..f085c18d290 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -195,6 +195,9 @@ static unsigned int applesmc_accelerometer; /* Indicates whether this computer has light sensors and keyboard backlight. */ static unsigned int applesmc_light; +/* The number of fans handled by the driver */ +static unsigned int fans_handled; + /* Indicates which temperature sensors set to use. */ static unsigned int applesmc_temperature_set; @@ -1492,39 +1495,24 @@ static int __init applesmc_init(void) /* create fan files */ count = applesmc_get_fan_count(); - if (count < 0) { + if (count < 0) printk(KERN_ERR "applesmc: Cannot get the number of fans.\n"); - } else { + else printk(KERN_INFO "applesmc: %d fans found.\n", count); - switch (count) { - default: - printk(KERN_WARNING "applesmc: More than 4 fans found," - " but at most 4 fans are supported" - " by the driver.\n"); - case 4: - ret = sysfs_create_group(&pdev->dev.kobj, - &fan_attribute_groups[3]); - if (ret) - goto out_key_enumeration; - case 3: - ret = sysfs_create_group(&pdev->dev.kobj, - &fan_attribute_groups[2]); - if (ret) - goto out_key_enumeration; - case 2: - ret = sysfs_create_group(&pdev->dev.kobj, - &fan_attribute_groups[1]); - if (ret) - goto out_key_enumeration; - case 1: - ret = sysfs_create_group(&pdev->dev.kobj, - &fan_attribute_groups[0]); - if (ret) - goto out_fan_1; - case 0: - ; - } + if (count > 4) { + count = 4; + printk(KERN_WARNING "applesmc: More than 4 fans found," + " but at most 4 fans are supported" + " by the driver.\n"); + } + + while (fans_handled < count) { + ret = sysfs_create_group(&pdev->dev.kobj, + &fan_attribute_groups[fans_handled]); + if (ret) + goto out_fans; + fans_handled++; } for (i = 0; @@ -1593,10 +1581,10 @@ out_accelerometer: applesmc_release_accelerometer(); out_temperature: sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group); - sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]); -out_fan_1: - sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]); -out_key_enumeration: +out_fans: + while (fans_handled) + sysfs_remove_group(&pdev->dev.kobj, + &fan_attribute_groups[--fans_handled]); sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group); out_name: sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr); @@ -1622,8 +1610,9 @@ static void __exit applesmc_exit(void) if (applesmc_accelerometer) applesmc_release_accelerometer(); sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group); - sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]); - sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]); + while (fans_handled) + sysfs_remove_group(&pdev->dev.kobj, + &fan_attribute_groups[--fans_handled]); sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group); sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr); platform_device_unregister(pdev); -- cgit v1.2.3