From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/i2c/busses/i2c-piix4.c | 490 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 490 insertions(+) create mode 100644 drivers/i2c/busses/i2c-piix4.c (limited to 'drivers/i2c/busses/i2c-piix4.c') diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c new file mode 100644 index 00000000000..646381b6b3b --- /dev/null +++ b/drivers/i2c/busses/i2c-piix4.c @@ -0,0 +1,490 @@ +/* + piix4.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2002 Frodo Looijaard and + Philip Edelbrock + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports: + Intel PIIX4, 440MX + Serverworks OSB4, CSB5, CSB6 + SMSC Victory66 + + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +struct sd { + const unsigned short mfr; + const unsigned short dev; + const unsigned char fn; + const char *name; +}; + +/* PIIX4 SMBus address offsets */ +#define SMBHSTSTS (0 + piix4_smba) +#define SMBHSLVSTS (1 + piix4_smba) +#define SMBHSTCNT (2 + piix4_smba) +#define SMBHSTCMD (3 + piix4_smba) +#define SMBHSTADD (4 + piix4_smba) +#define SMBHSTDAT0 (5 + piix4_smba) +#define SMBHSTDAT1 (6 + piix4_smba) +#define SMBBLKDAT (7 + piix4_smba) +#define SMBSLVCNT (8 + piix4_smba) +#define SMBSHDWCMD (9 + piix4_smba) +#define SMBSLVEVT (0xA + piix4_smba) +#define SMBSLVDAT (0xC + piix4_smba) + +/* count for request_region */ +#define SMBIOSIZE 8 + +/* PCI Address Constants */ +#define SMBBA 0x090 +#define SMBHSTCFG 0x0D2 +#define SMBSLVC 0x0D3 +#define SMBSHDW1 0x0D4 +#define SMBSHDW2 0x0D5 +#define SMBREV 0x0D6 + +/* Other settings */ +#define MAX_TIMEOUT 500 +#define ENABLE_INT9 0 + +/* PIIX4 constants */ +#define PIIX4_QUICK 0x00 +#define PIIX4_BYTE 0x04 +#define PIIX4_BYTE_DATA 0x08 +#define PIIX4_WORD_DATA 0x0C +#define PIIX4_BLOCK_DATA 0x14 + +/* insmod parameters */ + +/* If force is set to anything different from 0, we forcibly enable the + PIIX4. DANGEROUS! */ +static int force = 0; +module_param (force, int, 0); +MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); + +/* If force_addr is set to anything different from 0, we forcibly enable + the PIIX4 at the given address. VERY DANGEROUS! */ +static int force_addr = 0; +module_param (force_addr, int, 0); +MODULE_PARM_DESC(force_addr, + "Forcibly enable the PIIX4 at the given address. " + "EXTREMELY DANGEROUS!"); + +/* If fix_hstcfg is set to anything different from 0, we reset one of the + registers to be a valid value. */ +static int fix_hstcfg = 0; +module_param (fix_hstcfg, int, 0); +MODULE_PARM_DESC(fix_hstcfg, + "Fix config register. Needed on some boards (Force CPCI735)."); + +static int piix4_transaction(void); + +static unsigned short piix4_smba = 0; +static struct i2c_adapter piix4_adapter; + +static struct dmi_system_id __devinitdata piix4_dmi_table[] = { + { + .ident = "IBM", + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, + }, + { }, +}; + +static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id) +{ + unsigned char temp; + + /* match up the function */ + if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data) + return -ENODEV; + + dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev)); + + /* Don't access SMBus on IBM systems which get corrupted eeproms */ + if (dmi_check_system(piix4_dmi_table) && + PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { + dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module " + "may corrupt your serial eeprom! Refusing to load " + "module!\n"); + return -EPERM; + } + + /* Determine the address of the SMBus areas */ + if (force_addr) { + piix4_smba = force_addr & 0xfff0; + force = 0; + } else { + pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); + piix4_smba &= 0xfff0; + if(piix4_smba == 0) { + dev_err(&PIIX4_dev->dev, "SMB base address " + "uninitialized - upgrade BIOS or use " + "force_addr=0xaddr\n"); + return -ENODEV; + } + } + + if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) { + dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", + piix4_smba); + return -ENODEV; + } + + pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); + + /* Some BIOS will set up the chipset incorrectly and leave a register + in an undefined state (causing I2C to act very strangely). */ + if (temp & 0x02) { + if (fix_hstcfg) { + dev_info(&PIIX4_dev->dev, "Working around buggy BIOS " + "(I2C)\n"); + temp &= 0xfd; + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp); + } else { + dev_info(&PIIX4_dev->dev, "Unusual config register " + "value\n"); + dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if " + "you experience problems\n"); + } + } + + /* If force_addr is set, we program the new address here. Just to make + sure, we disable the PIIX4 first. */ + if (force_addr) { + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); + pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); + dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " + "new address %04x!\n", piix4_smba); + } else if ((temp & 1) == 0) { + if (force) { + /* This should never need to be done, but has been + * noted that many Dell machines have the SMBus + * interface on the PIIX4 disabled!? NOTE: This assumes + * I/O space and other allocations WERE done by the + * Bios! Don't complain if your hardware does weird + * things after enabling this. :') Check for Bios + * updates before resorting to this. + */ + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, + temp | 1); + dev_printk(KERN_NOTICE, &PIIX4_dev->dev, + "WARNING: SMBus interface has been " + "FORCEFULLY ENABLED!\n"); + } else { + dev_err(&PIIX4_dev->dev, + "Host SMBus controller not enabled!\n"); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + return -ENODEV; + } + } + + if ((temp & 0x0E) == 8) + dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n"); + else if ((temp & 0x0E) == 0) + dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n"); + else + dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " + "(or code out of date)!\n"); + + pci_read_config_byte(PIIX4_dev, SMBREV, &temp); + dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba); + + return 0; +} + +/* Another internally used function */ +static int piix4_transaction(void) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). " + "Resetting... \n", temp); + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); + return -1; + } else { + dev_dbg(&piix4_adapter.dev, "Successfull!\n"); + } + } + + /* start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + + /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); + result = -1; + } + + if (temp & 0x10) { + result = -1; + dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); + } + + if (temp & 0x08) { + result = -1; + dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " + "locked until next hard reset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } + + if (temp & 0x04) { + result = -1; + dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); + } + + if (inb_p(SMBHSTSTS) != 0x00) + outb_p(inb(SMBHSTSTS), SMBHSTSTS); + + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_err(&piix4_adapter.dev, "Failed reset at end of " + "transaction (%02x)\n", temp); + } + dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + return result; +} + +/* Return -1 on error. */ +static s32 piix4_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + int i, len; + + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + return -1; + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = PIIX4_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + size = PIIX4_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + size = PIIX4_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = PIIX4_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + if (len > 32) + len = 32; + outb_p(len, SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + size = PIIX4_BLOCK_DATA; + break; + } + + outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + + if (piix4_transaction()) /* Error in transaction */ + return -1; + + if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) + return 0; + + + switch (size) { + case PIIX4_BYTE: /* Where is the result put? I assume here it is in + SMBHSTDAT0 but it might just as well be in the + SMBHSTCMD. No clue in the docs */ + + data->byte = inb_p(SMBHSTDAT0); + break; + case PIIX4_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case PIIX4_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case PIIX4_BLOCK_DATA: + data->block[0] = inb_p(SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMBBLKDAT); + break; + } + return 0; +} + +static u32 piix4_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = piix4_access, + .functionality = piix4_func, +}; + +static struct i2c_adapter piix4_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static struct pci_device_id piix4_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3), + .driver_data = 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), + .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), + .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6), + .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3), + .driver_data = 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3), + .driver_data = 0 }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, piix4_ids); + +static int __devinit piix4_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + int retval; + + retval = piix4_setup(dev, id); + if (retval) + return retval; + + /* set up the driverfs linkage to our parent device */ + piix4_adapter.dev.parent = &dev->dev; + + snprintf(piix4_adapter.name, I2C_NAME_SIZE, + "SMBus PIIX4 adapter at %04x", piix4_smba); + + if ((retval = i2c_add_adapter(&piix4_adapter))) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + } + + return retval; +} + +static void __devexit piix4_remove(struct pci_dev *dev) +{ + if (piix4_smba) { + i2c_del_adapter(&piix4_adapter); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + } +} + +static struct pci_driver piix4_driver = { + .name = "piix4_smbus", + .id_table = piix4_ids, + .probe = piix4_probe, + .remove = __devexit_p(piix4_remove), +}; + +static int __init i2c_piix4_init(void) +{ + return pci_register_driver(&piix4_driver); +} + +static void __exit i2c_piix4_exit(void) +{ + pci_unregister_driver(&piix4_driver); +} + +MODULE_AUTHOR("Frodo Looijaard and " + "Philip Edelbrock "); +MODULE_DESCRIPTION("PIIX4 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_piix4_init); +module_exit(i2c_piix4_exit); -- cgit v1.2.3