From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/i2c/busses/i2c-sis630.c | 523 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 523 insertions(+) create mode 100644 drivers/i2c/busses/i2c-sis630.c (limited to 'drivers/i2c/busses/i2c-sis630.c') diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c new file mode 100644 index 00000000000..58df63df154 --- /dev/null +++ b/drivers/i2c/busses/i2c-sis630.c @@ -0,0 +1,523 @@ +/* + i2c-sis630.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (c) 2002,2003 Alexander Malysh + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Changes: + 24.08.2002 + Fixed the typo in sis630_access (Thanks to Mark M. Hoffman) + Changed sis630_transaction.(Thanks to Mark M. Hoffman) + 18.09.2002 + Added SIS730 as supported. + 21.09.2002 + Added high_clock module option.If this option is set + used Host Master Clock 56KHz (default 14KHz).For now we save old Host + Master Clock and after transaction completed restore (otherwise + it's confuse BIOS and hung Machine). + 24.09.2002 + Fixed typo in sis630_access + Fixed logical error by restoring of Host Master Clock + 31.07.2003 + Added block data read/write support. +*/ + +/* + Status: beta + + Supports: + SIS 630 + SIS 730 + + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SIS630 SMBus registers */ +#define SMB_STS 0x80 /* status */ +#define SMB_EN 0x81 /* status enable */ +#define SMB_CNT 0x82 +#define SMBHOST_CNT 0x83 +#define SMB_ADDR 0x84 +#define SMB_CMD 0x85 +#define SMB_PCOUNT 0x86 /* processed count */ +#define SMB_COUNT 0x87 +#define SMB_BYTE 0x88 /* ~0x8F data byte field */ +#define SMBDEV_ADDR 0x90 +#define SMB_DB0 0x91 +#define SMB_DB1 0x92 +#define SMB_SAA 0x93 + +/* register count for request_region */ +#define SIS630_SMB_IOREGION 20 + +/* PCI address constants */ +/* acpi base address register */ +#define SIS630_ACPI_BASE_REG 0x74 +/* bios control register */ +#define SIS630_BIOS_CTL_REG 0x40 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* SIS630 constants */ +#define SIS630_QUICK 0x00 +#define SIS630_BYTE 0x01 +#define SIS630_BYTE_DATA 0x02 +#define SIS630_WORD_DATA 0x03 +#define SIS630_PCALL 0x04 +#define SIS630_BLOCK_DATA 0x05 + +/* insmod parameters */ +static int high_clock; +static int force; +module_param(high_clock, bool, 0); +MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz)."); +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); + +/* acpi base address */ +static unsigned short acpi_base = 0; + +/* supported chips */ +static int supported[] = { + PCI_DEVICE_ID_SI_630, + PCI_DEVICE_ID_SI_730, + 0 /* terminates the list */ +}; + +static inline u8 sis630_read(u8 reg) +{ + return inb(acpi_base + reg); +} + +static inline void sis630_write(u8 reg, u8 data) +{ + outb(data, acpi_base + reg); +} + +static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock) +{ + int temp; + + /* Make sure the SMBus host is ready to start transmitting. */ + if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) { + dev_dbg(&adap->dev, "SMBus busy (%02x).Resetting...\n",temp); + /* kill smbus transaction */ + sis630_write(SMBHOST_CNT, 0x20); + + if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) { + dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); + return -1; + } else { + dev_dbg(&adap->dev, "Successfull!\n"); + } + } + + /* save old clock, so we can prevent machine for hung */ + *oldclock = sis630_read(SMB_CNT); + + dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock); + + /* disable timeout interrupt , set Host Master Clock to 56KHz if requested */ + if (high_clock) + sis630_write(SMB_CNT, 0x20); + else + sis630_write(SMB_CNT, (*oldclock & ~0x40)); + + /* clear all sticky bits */ + temp = sis630_read(SMB_STS); + sis630_write(SMB_STS, temp & 0x1e); + + /* start the transaction by setting bit 4 and size */ + sis630_write(SMBHOST_CNT,0x10 | (size & 0x07)); + + return 0; +} + +static int sis630_transaction_wait(struct i2c_adapter *adap, int size) +{ + int temp, result = 0, timeout = 0; + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = sis630_read(SMB_STS); + /* check if block transmitted */ + if (size == SIS630_BLOCK_DATA && (temp & 0x10)) + break; + } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&adap->dev, "SMBus Timeout!\n"); + result = -1; + } + + if (temp & 0x02) { + dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); + result = -1; + } + + if (temp & 0x04) { + dev_err(&adap->dev, "Bus collision!\n"); + result = -1; + /* + TBD: Datasheet say: + the software should clear this bit and restart SMBUS operation. + Should we do it or user start request again? + */ + } + + return result; +} + +static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock) +{ + int temp = 0; + + /* clear all status "sticky" bits */ + sis630_write(SMB_STS, temp); + + dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT)); + + /* + * restore old Host Master Clock if high_clock is set + * and oldclock was not 56KHz + */ + if (high_clock && !(oldclock & 0x20)) + sis630_write(SMB_CNT,(sis630_read(SMB_CNT) & ~0x20)); + + dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT)); +} + +static int sis630_transaction(struct i2c_adapter *adap, int size) +{ + int result = 0; + u8 oldclock = 0; + + result = sis630_transaction_start(adap, size, &oldclock); + if (!result) { + result = sis630_transaction_wait(adap, size); + sis630_transaction_end(adap, oldclock); + } + + return result; +} + +static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write) +{ + int i, len = 0, rc = 0; + u8 oldclock = 0; + + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + else if (len > 32) + len = 32; + sis630_write(SMB_COUNT, len); + for (i=1; i <= len; i++) { + dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]); + /* set data */ + sis630_write(SMB_BYTE+(i-1)%8, data->block[i]); + if (i==8 || (len<8 && i==len)) { + dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i); + /* first transaction */ + if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) + return -1; + } + else if ((i-1)%8 == 7 || i==len) { + dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i); + if (i>8) { + dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i); + /* + If this is not first transaction, + we must clear sticky bit. + clear SMBARY_STS + */ + sis630_write(SMB_STS,0x10); + } + if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + dev_dbg(&adap->dev, "trans_wait failed\n"); + rc = -1; + break; + } + } + } + } + else { + /* read request */ + data->block[0] = len = 0; + if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) { + return -1; + } + do { + if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + dev_dbg(&adap->dev, "trans_wait failed\n"); + rc = -1; + break; + } + /* if this first transaction then read byte count */ + if (len == 0) + data->block[0] = sis630_read(SMB_COUNT); + + /* just to be sure */ + if (data->block[0] > 32) + data->block[0] = 32; + + dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]); + + for (i=0; i < 8 && len < data->block[0]; i++,len++) { + dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len); + data->block[len+1] = sis630_read(SMB_BYTE+i); + } + + dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i); + + /* clear SMBARY_STS */ + sis630_write(SMB_STS,0x10); + } while(len < data->block[0]); + } + + sis630_transaction_end(adap, oldclock); + + return rc; +} + +/* Return -1 on error. */ +static s32 sis630_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + switch (size) { + case I2C_SMBUS_QUICK: + sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + size = SIS630_QUICK; + break; + case I2C_SMBUS_BYTE: + sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + if (read_write == I2C_SMBUS_WRITE) + sis630_write(SMB_CMD, command); + size = SIS630_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) + sis630_write(SMB_BYTE, data->byte); + size = SIS630_BYTE_DATA; + break; + case I2C_SMBUS_PROC_CALL: + case I2C_SMBUS_WORD_DATA: + sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + sis630_write(SMB_BYTE, data->word & 0xff); + sis630_write(SMB_BYTE + 1,(data->word & 0xff00) >> 8); + } + size = (size == I2C_SMBUS_PROC_CALL ? SIS630_PCALL : SIS630_WORD_DATA); + break; + case I2C_SMBUS_BLOCK_DATA: + sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + size = SIS630_BLOCK_DATA; + return sis630_block_data(adap, data, read_write); + default: + printk("Unsupported I2C size\n"); + return -1; + break; + } + + if (sis630_transaction(adap, size)) + return -1; + + if ((size != SIS630_PCALL) && + ((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) { + return 0; + } + + switch(size) { + case SIS630_BYTE: + case SIS630_BYTE_DATA: + data->byte = sis630_read(SMB_BYTE); + break; + case SIS630_PCALL: + case SIS630_WORD_DATA: + data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8); + break; + default: + return -1; + break; + } + + return 0; +} + +static u32 sis630_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static int sis630_setup(struct pci_dev *sis630_dev) +{ + unsigned char b; + struct pci_dev *dummy = NULL; + int retval = -ENODEV, i; + + /* check for supported SiS devices */ + for (i=0; supported[i] > 0 ; i++) { + if ((dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy))) + break; /* found */ + } + + if (dummy) { + pci_dev_put(dummy); + } + else if (force) { + dev_err(&sis630_dev->dev, "WARNING: Can't detect SIS630 compatible device, but " + "loading because of force option enabled\n"); + } + else { + return -ENODEV; + } + + /* + Enable ACPI first , so we can accsess reg 74-75 + in acpi io space and read acpi base addr + */ + if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) { + dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n"); + goto exit; + } + /* if ACPI already enabled , do nothing */ + if (!(b & 0x80) && + pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) { + dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n"); + goto exit; + } + + /* Determine the ACPI base address */ + if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) { + dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n"); + goto exit; + } + + dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); + + /* Everything is happy, let's grab the memory and set things up. */ + if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) { + dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " + "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); + goto exit; + } + + retval = 0; + +exit: + if (retval) + acpi_base = 0; + return retval; +} + + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = sis630_access, + .functionality = sis630_func, +}; + +static struct i2c_adapter sis630_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .name = "unset", + .algo = &smbus_algorithm, +}; + +static struct pci_device_id sis630_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, sis630_ids); + +static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + if (sis630_setup(dev)) { + dev_err(&dev->dev, "SIS630 comp. bus not detected, module not inserted.\n"); + return -ENODEV; + } + + /* set up the driverfs linkage to our parent device */ + sis630_adapter.dev.parent = &dev->dev; + + sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x", + acpi_base + SMB_STS); + + return i2c_add_adapter(&sis630_adapter); +} + +static void __devexit sis630_remove(struct pci_dev *dev) +{ + if (acpi_base) { + i2c_del_adapter(&sis630_adapter); + release_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION); + acpi_base = 0; + } +} + + +static struct pci_driver sis630_driver = { + .name = "sis630_smbus", + .id_table = sis630_ids, + .probe = sis630_probe, + .remove = __devexit_p(sis630_remove), +}; + +static int __init i2c_sis630_init(void) +{ + return pci_register_driver(&sis630_driver); +} + + +static void __exit i2c_sis630_exit(void) +{ + pci_unregister_driver(&sis630_driver); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Malysh "); +MODULE_DESCRIPTION("SIS630 SMBus driver"); + +module_init(i2c_sis630_init); +module_exit(i2c_sis630_exit); -- cgit v1.2.3