From 02864d58ce102804b148c92e44726d9571d65d1e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 6 Dec 2009 17:06:17 +0100 Subject: i2c-powermac: Refactor i2c_powermac_smbus_xfer I wanted to add some error logging to the i2c-powermac driver, but found that it was very difficult due to the way the i2c_powermac_smbus_xfer function is organized. Refactor the code in this function so that each low-level function is only called once. Signed-off-by: Jean Delvare Tested-by: Michel Daenzer Cc: Benjamin Herrenschmidt Cc: Paul Mackerras --- drivers/i2c/busses/i2c-powermac.c | 85 +++++++++++++++++++-------------------- 1 file changed, 41 insertions(+), 44 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index a74f3bab05b..dba8e387f43 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -49,48 +49,38 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap, int rc = 0; int read = (read_write == I2C_SMBUS_READ); int addrdir = (addr << 1) | read; + int mode, subsize, len; + u32 subaddr; + u8 *buf; u8 local[2]; - rc = pmac_i2c_open(bus, 0); - if (rc) - return rc; + if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) { + mode = pmac_i2c_mode_std; + subsize = 0; + subaddr = 0; + } else { + mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub; + subsize = 1; + subaddr = command; + } switch (size) { case I2C_SMBUS_QUICK: - rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); - if (rc) - goto bail; - rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0); + buf = NULL; + len = 0; break; case I2C_SMBUS_BYTE: - rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); - if (rc) - goto bail; - rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1); - break; case I2C_SMBUS_BYTE_DATA: - rc = pmac_i2c_setmode(bus, read ? - pmac_i2c_mode_combined : - pmac_i2c_mode_stdsub); - if (rc) - goto bail; - rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1); + buf = &data->byte; + len = 1; break; case I2C_SMBUS_WORD_DATA: - rc = pmac_i2c_setmode(bus, read ? - pmac_i2c_mode_combined : - pmac_i2c_mode_stdsub); - if (rc) - goto bail; if (!read) { local[0] = data->word & 0xff; local[1] = (data->word >> 8) & 0xff; } - rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2); - if (rc == 0 && read) { - data->word = ((u16)local[1]) << 8; - data->word |= local[0]; - } + buf = local; + len = 2; break; /* Note that these are broken vs. the expected smbus API where @@ -105,28 +95,35 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap, * a repeat start/addr phase (but not stop in between) */ case I2C_SMBUS_BLOCK_DATA: - rc = pmac_i2c_setmode(bus, read ? - pmac_i2c_mode_combined : - pmac_i2c_mode_stdsub); - if (rc) - goto bail; - rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block, - data->block[0] + 1); - + buf = data->block; + len = data->block[0] + 1; break; case I2C_SMBUS_I2C_BLOCK_DATA: - rc = pmac_i2c_setmode(bus, read ? - pmac_i2c_mode_combined : - pmac_i2c_mode_stdsub); - if (rc) - goto bail; - rc = pmac_i2c_xfer(bus, addrdir, 1, command, - &data->block[1], data->block[0]); + buf = &data->block[1]; + len = data->block[0]; break; default: - rc = -EINVAL; + return -EINVAL; } + + rc = pmac_i2c_open(bus, 0); + if (rc) + return rc; + + rc = pmac_i2c_setmode(bus, mode); + if (rc) + goto bail; + + rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len); + if (rc) + goto bail; + + if (size == I2C_SMBUS_WORD_DATA && read) { + data->word = ((u16)local[1]) << 8; + data->word |= local[0]; + } + bail: pmac_i2c_close(bus); return rc; -- cgit v1.2.3