From 392a0408fdc4c9069c32a9a02b0088eae76c4618 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 14 Jul 2008 22:38:33 +0200 Subject: i2c-sibyte: SWARM I2C board initialization The standard rtc-m41t80.c driver cannot be used with the SWARM as it is, because the board does not provide setup information for the I2C core. As a result the bus and the address to probe for the M41T80 chip is not known. Here is a set of changes that fix the problem: 1. swarm-i2c.c -- SWARM I2C board setup, currently for the M41T80 chip on the bus #1 only (there is a MAX6654 temperature sensor on the bus #0 which may be added in the future if we have a driver for that chip). 2. The i2c-sibyte.c BCM1250A SMBus controller driver now registers its buses as numbered so that board setup is correctly applied. Signed-off-by: Maciej W. Rozycki Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-sibyte.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index ac8822e7a5b..4ddefbf238e 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -143,7 +143,7 @@ static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ)); csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL)); - return i2c_add_adapter(i2c_adap); + return i2c_add_numbered_adapter(i2c_adap); } @@ -159,6 +159,7 @@ static struct i2c_adapter sibyte_board_adapter[2] = { .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[0], + .nr = 0, .name = "SiByte SMBus 0", }, { @@ -167,6 +168,7 @@ static struct i2c_adapter sibyte_board_adapter[2] = { .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[1], + .nr = 1, .name = "SiByte SMBus 1", }, }; -- cgit v1.2.3