From 07bd3f4731f9c7ebcbab90905ca4ad6fc6825f96 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 2 Jan 2009 16:12:51 +0100 Subject: ide-floppy: allocate only toplevel packet commands This makes the top-level function just allocate a single pc entry, and then pass it down as a pointer to all the helper functions that also need one of those "struct ide_atapi_pc" things. As far as I can tell, the use of these things never overlaps each other, BUT I DID NOT CHECK VERY CLOSELY! So I'm not guaranteeing this is correct, and I don't have the hardware. It would be good for somebody who knows the code more, and has the hardware, could please test this? With this, ide-floppy still has fairly big stack usage, but instead of idefloppy_ioctl [vmlinux]: 1208 ide_floppy_get_capacity [vmlinux]: 872 idefloppy_release [vmlinux]: 408 idefloppy_open [vmlinux]: 408 where those two first ones are at the very top of the list of stack users for me, it's now ide_floppy_get_capacity [vmlinux]: 404 ide_floppy_ioctl [vmlinux]: 364 ie they are still high, but they are no longer at the top. Borislav: Since ide_floppy_get_capacity is passed as a function pointer to other parts of the kernel (e.g., block layer) we need that ide_atapi_pc to be created on stack. Also, redid stack users numbers above. The two functions missing from Linus' original 'make stackusage' output are due to ide being rewritten/reorganized atm. Signed-off-by: Linus Torvalds Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/ide/ide-floppy.c') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index aeb1ad782f5..1f07f381893 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -342,38 +342,38 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, * Look at the flexible disk page parameters. We ignore the CHS capacity * parameters and use the LBA parameters instead. */ -static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) +static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive, + struct ide_atapi_pc *pc) { struct ide_disk_obj *floppy = drive->driver_data; struct gendisk *disk = floppy->disk; - struct ide_atapi_pc pc; u8 *page; int capacity, lba_capacity; u16 transfer_rate, sector_size, cyls, rpm; u8 heads, sectors; - ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); + ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE); - if (ide_queue_pc_tail(drive, disk, &pc)) { + if (ide_queue_pc_tail(drive, disk, pc)) { printk(KERN_ERR PFX "Can't get flexible disk page params\n"); return 1; } - if (pc.buf[3] & 0x80) + if (pc->buf[3] & 0x80) drive->dev_flags |= IDE_DFLAG_WP; else drive->dev_flags &= ~IDE_DFLAG_WP; set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP)); - page = &pc.buf[8]; + page = &pc->buf[8]; - transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); - sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]); - cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]); - rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]); - heads = pc.buf[8 + 4]; - sectors = pc.buf[8 + 5]; + transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]); + sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]); + cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]); + rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]); + heads = pc->buf[8 + 4]; + sectors = pc->buf[8 + 5]; capacity = cyls * heads * sectors * sector_size; @@ -499,7 +499,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) /* Clik! disk does not support get_flexible_disk_page */ if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE)) - (void) ide_floppy_get_flexible_disk_page(drive); + (void) ide_floppy_get_flexible_disk_page(drive, &pc); return rc; } -- cgit v1.2.3