From ceb1b2c583a9503e3ae68c4e7c652637971e3768 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Fri, 25 Jan 2008 22:17:04 +0100
Subject: hpt366: change timing register masks

Since PIO autotuning is now done always, there's no need anymore to program
the taskfile timings also on DMA modes, so change the IDE timing register
masks accordingly, "inverting the polarity" of the masks while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 9fce25bdec8..edb267c78af 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/hpt366.c		Version 1.22	Dec 4, 2007
+ * linux/drivers/ide/pci/hpt366.c		Version 1.23	Dec 7, 2007
  *
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -689,19 +689,17 @@ static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
 	struct hpt_info	*info	= pci_get_drvdata(dev);
 	u8  itr_addr		= drive->dn ? 0x44 : 0x40;
 	u32 old_itr		= 0;
-	u32 itr_mask, new_itr;
-
-	itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
-		  (speed < XFER_UDMA_0   ? 0xc0070000 : 0xc03800ff);
-
-	new_itr = get_speed_setting(speed, info);
+	u32 new_itr		= get_speed_setting(speed, info);
+	u32 itr_mask		= speed < XFER_MW_DMA_0 ? 0xc1f8ffff :
+				 (speed < XFER_UDMA_0   ? 0x303800ff :
+							  0x30070000);
 
+	pci_read_config_dword(dev, itr_addr, &old_itr);
+	new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
 	/*
 	 * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
 	 * to avoid problems handling I/O errors later
 	 */
-	pci_read_config_dword(dev, itr_addr, &old_itr);
-	new_itr  = (new_itr & ~itr_mask) | (old_itr & itr_mask);
 	new_itr &= ~0xc0000000;
 
 	pci_write_config_dword(dev, itr_addr, new_itr);
@@ -714,16 +712,14 @@ static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
 	struct hpt_info	*info	= pci_get_drvdata(dev);
 	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
-	u32 itr_mask, new_itr;
-
-	itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
-		  (speed < XFER_UDMA_0   ? 0xc03c0000 : 0xc1c001ff);
-
-	new_itr = get_speed_setting(speed, info);
+	u32 new_itr		= get_speed_setting(speed, info);
+	u32 itr_mask		= speed < XFER_MW_DMA_0 ? 0xcfc3ffff :
+				 (speed < XFER_UDMA_0   ? 0x31c001ff :
+							  0x303c0000);
 
 	pci_read_config_dword(dev, itr_addr, &old_itr);
-	new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
-	
+	new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
+
 	if (speed < XFER_MW_DMA_0)
 		new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
 	pci_write_config_dword(dev, itr_addr, new_itr);
-- 
cgit v1.2.3


From a488f34e0dc7180f35fe48a60596fc82fe69d3ef Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Fri, 25 Jan 2008 22:17:05 +0100
Subject: hpt366: kill set_dma_mode() method wrapper

There's no reason to keep the set_dma_mode() method wrapper for two different
chip families, so get rid of it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index edb267c78af..faf77fd2e4e 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/hpt366.c		Version 1.23	Dec 7, 2007
+ * linux/drivers/ide/pci/hpt366.c		Version 1.24	Dec 8, 2007
  *
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -725,20 +725,9 @@ static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
 	pci_write_config_dword(dev, itr_addr, new_itr);
 }
 
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct hpt_info	*info	= pci_get_drvdata(hwif->pci_dev);
-
-	if (info->chip_type >= HPT370)
-		hpt37x_set_mode(drive, speed);
-	else	/* hpt368: hpt_minimum_revision(dev, 2) */
-		hpt36x_set_mode(drive, speed);
-}
-
 static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-	hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
+	HWIF(drive)->set_dma_mode(drive, XFER_PIO_0 + pio);
 }
 
 static int hpt3xx_quirkproc(ide_drive_t *drive)
@@ -1315,7 +1304,11 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	hwif->select_data	= hwif->channel ? 0x54 : 0x50;
 
 	hwif->set_pio_mode	= &hpt3xx_set_pio_mode;
-	hwif->set_dma_mode	= &hpt3xx_set_mode;
+	if (chip_type >= HPT370)
+		hwif->set_dma_mode = &hpt37x_set_mode;
+	else
+		hwif->set_dma_mode = &hpt36x_set_mode;
+
 	hwif->quirkproc		= &hpt3xx_quirkproc;
 	hwif->intrproc		= &hpt3xx_intrproc;
 	hwif->maskproc		= &hpt3xx_maskproc;
-- 
cgit v1.2.3


From 866664d79f6a920af07e6503f64366f4c5b2d41f Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Fri, 25 Jan 2008 22:17:05 +0100
Subject: hpt366: merge set_dma_mode() methods

Group the array of pointers to the timing tables with the timing register masks
which allows us to merge HPT36x/HPT37x set_dma_mode() methods into one.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c | 129 +++++++++++++++++++++--------------------------
 1 file changed, 58 insertions(+), 71 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index faf77fd2e4e..df14d692743 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/hpt366.c		Version 1.24	Dec 8, 2007
+ * linux/drivers/ide/pci/hpt366.c		Version 1.30	Dec 12, 2007
  *
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -88,7 +88,7 @@
  * - rename all the register related variables consistently
  * - move all the interrupt twiddling code from the speedproc handlers into
  *   init_hwif_hpt366(), also grouping all the DMA related code together there
- * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and
+ * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
  *   separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
  *   when setting an UltraDMA mode
  * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
@@ -458,6 +458,13 @@ enum ata_clock {
 	NUM_ATA_CLOCKS
 };
 
+struct hpt_timings {
+	u32 pio_mask;
+	u32 dma_mask;
+	u32 ultra_mask;
+	u32 *clock_table[NUM_ATA_CLOCKS];
+};
+
 /*
  *	Hold all the HighPoint chip information in one place.
  */
@@ -468,7 +475,8 @@ struct hpt_info {
 	u8 udma_mask;		/* Allowed UltraDMA modes mask. */
 	u8 dpll_clk;		/* DPLL clock in MHz */
 	u8 pci_clk;		/* PCI  clock in MHz */
-	u32 **settings; 	/* Chipset settings table */
+	struct hpt_timings *timings; /* Chipset timing data */
+	u8 clock;		/* ATA clock selected */
 };
 
 /* Supported HighPoint chips */
@@ -486,20 +494,30 @@ enum {
 	HPT371N
 };
 
-static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = {
-	twenty_five_base_hpt36x,
-	thirty_three_base_hpt36x,
-	forty_base_hpt36x,
-	NULL,
-	NULL
+static struct hpt_timings hpt36x_timings = {
+	.pio_mask	= 0xc1f8ffff,
+	.dma_mask	= 0x303800ff,
+	.ultra_mask	= 0x30070000,
+	.clock_table	= {
+		[ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
+		[ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
+		[ATA_CLOCK_40MHZ] = forty_base_hpt36x,
+		[ATA_CLOCK_50MHZ] = NULL,
+		[ATA_CLOCK_66MHZ] = NULL
+	}
 };
 
-static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
-	NULL,
-	thirty_three_base_hpt37x,
-	NULL,
-	fifty_base_hpt37x,
-	sixty_six_base_hpt37x
+static struct hpt_timings hpt37x_timings = {
+	.pio_mask	= 0xcfc3ffff,
+	.dma_mask	= 0x31c001ff,
+	.ultra_mask	= 0x303c0000,
+	.clock_table	= {
+		[ATA_CLOCK_25MHZ] = NULL,
+		[ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
+		[ATA_CLOCK_40MHZ] = NULL,
+		[ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
+		[ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
+	}
 };
 
 static const struct hpt_info hpt36x __devinitdata = {
@@ -507,7 +525,7 @@ static const struct hpt_info hpt36x __devinitdata = {
 	.chip_type	= HPT36x,
 	.udma_mask	= HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
 	.dpll_clk	= 0,	/* no DPLL */
-	.settings	= hpt36x_settings
+	.timings	= &hpt36x_timings
 };
 
 static const struct hpt_info hpt370 __devinitdata = {
@@ -515,7 +533,7 @@ static const struct hpt_info hpt370 __devinitdata = {
 	.chip_type	= HPT370,
 	.udma_mask	= HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
 	.dpll_clk	= 48,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt370a __devinitdata = {
@@ -523,7 +541,7 @@ static const struct hpt_info hpt370a __devinitdata = {
 	.chip_type	= HPT370A,
 	.udma_mask	= HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
 	.dpll_clk	= 48,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt374 __devinitdata = {
@@ -531,7 +549,7 @@ static const struct hpt_info hpt374 __devinitdata = {
 	.chip_type	= HPT374,
 	.udma_mask	= ATA_UDMA5,
 	.dpll_clk	= 48,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt372 __devinitdata = {
@@ -539,7 +557,7 @@ static const struct hpt_info hpt372 __devinitdata = {
 	.chip_type	= HPT372,
 	.udma_mask	= HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 55,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt372a __devinitdata = {
@@ -547,7 +565,7 @@ static const struct hpt_info hpt372a __devinitdata = {
 	.chip_type	= HPT372A,
 	.udma_mask	= HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 66,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt302 __devinitdata = {
@@ -555,7 +573,7 @@ static const struct hpt_info hpt302 __devinitdata = {
 	.chip_type	= HPT302,
 	.udma_mask	= HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 66,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt371 __devinitdata = {
@@ -563,7 +581,7 @@ static const struct hpt_info hpt371 __devinitdata = {
 	.chip_type	= HPT371,
 	.udma_mask	= HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 66,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt372n __devinitdata = {
@@ -571,7 +589,7 @@ static const struct hpt_info hpt372n __devinitdata = {
 	.chip_type	= HPT372N,
 	.udma_mask	= HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 77,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt302n __devinitdata = {
@@ -579,7 +597,7 @@ static const struct hpt_info hpt302n __devinitdata = {
 	.chip_type	= HPT302N,
 	.udma_mask	= HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 77,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static const struct hpt_info hpt371n __devinitdata = {
@@ -587,7 +605,7 @@ static const struct hpt_info hpt371n __devinitdata = {
 	.chip_type	= HPT371N,
 	.udma_mask	= HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
 	.dpll_clk	= 77,
-	.settings	= hpt37x_settings
+	.timings	= &hpt37x_timings
 };
 
 static int check_in_drive_list(ide_drive_t *drive, const char **list)
@@ -675,24 +693,21 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
 	for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
 		if (xfer_speeds[i] == speed)
 			break;
-	/*
-	 * NOTE: info->settings only points to the pointer
-	 * to the list of the actual register values
-	 */
-	return (*info->settings)[i];
+
+	return info->timings->clock_table[info->clock][i];
 }
 
-static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
+static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev  *dev	= hwif->pci_dev;
+	struct pci_dev  *dev	= HWIF(drive)->pci_dev;
 	struct hpt_info	*info	= pci_get_drvdata(dev);
-	u8  itr_addr		= drive->dn ? 0x44 : 0x40;
+	struct hpt_timings *t	= info->timings;
+	u8  itr_addr		= 0x40 + (drive->dn * 4);
 	u32 old_itr		= 0;
 	u32 new_itr		= get_speed_setting(speed, info);
-	u32 itr_mask		= speed < XFER_MW_DMA_0 ? 0xc1f8ffff :
-				 (speed < XFER_UDMA_0   ? 0x303800ff :
-							  0x30070000);
+	u32 itr_mask		= speed < XFER_MW_DMA_0 ? t->pio_mask :
+				 (speed < XFER_UDMA_0   ? t->dma_mask :
+							  t->ultra_mask);
 
 	pci_read_config_dword(dev, itr_addr, &old_itr);
 	new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
@@ -705,29 +720,9 @@ static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
 	pci_write_config_dword(dev, itr_addr, new_itr);
 }
 
-static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev  *dev	= hwif->pci_dev;
-	struct hpt_info	*info	= pci_get_drvdata(dev);
-	u8  itr_addr		= 0x40 + (drive->dn * 4);
-	u32 old_itr		= 0;
-	u32 new_itr		= get_speed_setting(speed, info);
-	u32 itr_mask		= speed < XFER_MW_DMA_0 ? 0xcfc3ffff :
-				 (speed < XFER_UDMA_0   ? 0x31c001ff :
-							  0x303c0000);
-
-	pci_read_config_dword(dev, itr_addr, &old_itr);
-	new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
-
-	if (speed < XFER_MW_DMA_0)
-		new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
-	pci_write_config_dword(dev, itr_addr, new_itr);
-}
-
 static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-	HWIF(drive)->set_dma_mode(drive, XFER_PIO_0 + pio);
+	hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
 static int hpt3xx_quirkproc(ide_drive_t *drive)
@@ -1195,7 +1190,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 	 * We also  don't like using  the DPLL because this causes glitches
 	 * on PRST-/SRST- when the state engine gets reset...
 	 */
-	if (chip_type >= HPT374 || info->settings[clock] == NULL) {
+	if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
 		u16 f_low, delta = pci_clk < 50 ? 2 : 4;
 		int adjust;
 
@@ -1211,7 +1206,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 			clock = ATA_CLOCK_50MHZ;
 		}
 
-		if (info->settings[clock] == NULL) {
+		if (info->timings->clock_table[clock] == NULL) {
 			printk(KERN_ERR "%s: unknown bus timing!\n", name);
 			kfree(info);
 			return -EIO;
@@ -1252,15 +1247,10 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 		printk("%s: using %d MHz PCI clock\n", name, pci_clk);
 	}
 
-	/*
-	 * Advance the table pointer to a slot which points to the list
-	 * of the register values settings matching the clock being used.
-	 */
-	info->settings += clock;
-
 	/* Store the clock frequencies. */
 	info->dpll_clk	= dpll_clk;
 	info->pci_clk	= pci_clk;
+	info->clock	= clock;
 
 	/* Point to this chip's own instance of the hpt_info structure. */
 	pci_set_drvdata(dev, info);
@@ -1304,10 +1294,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	hwif->select_data	= hwif->channel ? 0x54 : 0x50;
 
 	hwif->set_pio_mode	= &hpt3xx_set_pio_mode;
-	if (chip_type >= HPT370)
-		hwif->set_dma_mode = &hpt37x_set_mode;
-	else
-		hwif->set_dma_mode = &hpt36x_set_mode;
+	hwif->set_dma_mode	= &hpt3xx_set_mode;
 
 	hwif->quirkproc		= &hpt3xx_quirkproc;
 	hwif->intrproc		= &hpt3xx_intrproc;
-- 
cgit v1.2.3


From 1c029fd658baa2442e8e51dc9c819301cad95777 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:05 +0100
Subject: ide: remove ->dma_master field from ide_hwif_t (take 5)

* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use
  pci_resource_start(hwif->pci_dev, 4) instead of hwif->dma_master.

* Remove no longer needed ->dma_master field from ide_hwif_t.

v2:
* Use the more readable 'hwif->dma_base - (hwif->channel * 8)' instead of
  pci_resource_start(hwif->pci_dev, 4).

v3:
* Use hwif->extra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2
  (suggested by Sergei).

v4:
* Correct offsets in hpt3xxn_set_clock().

v5:
* Use hwif->extra_base in hpt366 for _real_ this time. (Noticed by Sergei)

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/cmd64x.c       |  8 +++++---
 drivers/ide/pci/hpt366.c       | 21 +++++++++++----------
 drivers/ide/pci/pdc202xx_old.c | 12 ++++++------
 3 files changed, 22 insertions(+), 19 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index bc553337b1b..f3613bac9db 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -333,14 +333,15 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 static int cmd648_ide_dma_end (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
 	int err			= __ide_dma_end(drive);
 	u8  irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
-	u8  mrdmode		= inb(hwif->dma_master + 0x01);
+	u8  mrdmode		= inb(base + 1);
 
 	/* clear the interrupt bit */
 	outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
-	     hwif->dma_master + 0x01);
+	     base + 1);
 
 	return err;
 }
@@ -365,10 +366,11 @@ static int cmd64x_ide_dma_end (ide_drive_t *drive)
 static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
+	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
 	u8 irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
 	u8 dma_stat		= inb(hwif->dma_status);
-	u8 mrdmode		= inb(hwif->dma_master + 0x01);
+	u8 mrdmode		= inb(base + 1);
 
 #ifdef DEBUG
 	printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index df14d692743..d3826a66834 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -894,32 +894,33 @@ static int hpt374_ide_dma_end(ide_drive_t *drive)
 
 static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
 {
-	u8 scr2 = inb(hwif->dma_master + 0x7b);
+	unsigned long base = hwif->extra_base;
+	u8 scr2 = inb(base + 0x6b);
 
 	if ((scr2 & 0x7f) == mode)
 		return;
 
 	/* Tristate the bus */
-	outb(0x80, hwif->dma_master + 0x73);
-	outb(0x80, hwif->dma_master + 0x77);
+	outb(0x80, base + 0x63);
+	outb(0x80, base + 0x67);
 
 	/* Switch clock and reset channels */
-	outb(mode, hwif->dma_master + 0x7b);
-	outb(0xc0, hwif->dma_master + 0x79);
+	outb(mode, base + 0x6b);
+	outb(0xc0, base + 0x69);
 
 	/*
 	 * Reset the state machines.
 	 * NOTE: avoid accidentally enabling the disabled channels.
 	 */
-	outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70);
-	outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74);
+	outb(inb(base + 0x60) | 0x32, base + 0x60);
+	outb(inb(base + 0x64) | 0x32, base + 0x64);
 
 	/* Complete reset */
-	outb(0x00, hwif->dma_master + 0x79);
+	outb(0x00, base + 0x69);
 
 	/* Reconnect channels to bus */
-	outb(0x00, hwif->dma_master + 0x73);
-	outb(0x00, hwif->dma_master + 0x77);
+	outb(0x00, base + 0x63);
+	outb(0x00, base + 0x67);
 }
 
 /**
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index e09742e2ba5..22c7a7533b6 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -162,7 +162,7 @@ static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
  */
 static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
 {
-	unsigned long clock_reg = hwif->dma_master + 0x11;
+	unsigned long clock_reg = hwif->extra_base + 0x01;
 	u8 clock = inb(clock_reg);
 
 	outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
@@ -170,7 +170,7 @@ static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
 
 static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
 {
-	unsigned long clock_reg = hwif->dma_master + 0x11;
+	unsigned long clock_reg = hwif->extra_base + 0x01;
 	u8 clock = inb(clock_reg);
 
 	outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
@@ -193,7 +193,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
 	if (drive->media != ide_disk || drive->addressing == 1) {
 		struct request *rq	= HWGROUP(drive)->rq;
 		ide_hwif_t *hwif	= HWIF(drive);
-		unsigned long high_16   = hwif->dma_master;
+		unsigned long high_16	= hwif->extra_base - 16;
 		unsigned long atapi_reg	= high_16 + (hwif->channel ? 0x24 : 0x20);
 		u32 word_count	= 0;
 		u8 clock = inb(high_16 + 0x11);
@@ -212,7 +212,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive)
 {
 	if (drive->media != ide_disk || drive->addressing == 1) {
 		ide_hwif_t *hwif	= HWIF(drive);
-		unsigned long high_16	= hwif->dma_master;
+		unsigned long high_16	= hwif->extra_base - 16;
 		unsigned long atapi_reg	= high_16 + (hwif->channel ? 0x24 : 0x20);
 		u8 clock		= 0;
 
@@ -228,7 +228,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive)
 static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
-	unsigned long high_16	= hwif->dma_master;
+	unsigned long high_16	= hwif->extra_base - 16;
 	u8 dma_stat		= inb(hwif->dma_status);
 	u8 sc1d			= inb(high_16 + 0x001d);
 
@@ -271,7 +271,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive)
 
 static void pdc202xx_reset_host (ide_hwif_t *hwif)
 {
-	unsigned long high_16	= hwif->dma_master;
+	unsigned long high_16	= hwif->extra_base - 16;
 	u8 udma_speed_flag	= inb(high_16 | 0x001f);
 
 	outb(udma_speed_flag | 0x10, high_16 | 0x001f);
-- 
cgit v1.2.3


From 7299a3918442dc9a5abb71b9f65b1dd17637c8c0 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:14 +0100
Subject: ide: remove hwif->intrproc

Given that:

* hpt366.c::hpt3xx_intrproc() is the only user of hwif->intrproc

* hpt366.c::hpt3xx_quirkproc() sets drive->quirk_list to 1 for quirky drives
  which is a value unique to hpt366 host driver

we can remove hwif->intproc and just check for drive->quirk_list == 1
in ide_do_request().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/hpt366.c  | 10 ----------
 drivers/ide/pci/sgiioc4.c |  1 -
 2 files changed, 11 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index d3826a66834..24d645751e0 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -736,15 +736,6 @@ static int hpt3xx_quirkproc(ide_drive_t *drive)
 	return 0;
 }
 
-static void hpt3xx_intrproc(ide_drive_t *drive)
-{
-	if (drive->quirk_list)
-		return;
-
-	/* drives in the quirk_list may not like intr setups/cleanups */
-	outb(drive->ctl | 2, IDE_CONTROL_REG);
-}
-
 static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
@@ -1298,7 +1289,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	hwif->set_dma_mode	= &hpt3xx_set_mode;
 
 	hwif->quirkproc		= &hpt3xx_quirkproc;
-	hwif->intrproc		= &hpt3xx_intrproc;
 	hwif->maskproc		= &hpt3xx_maskproc;
 	hwif->busproc		= &hpt3xx_busproc;
 
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index de820aa58cd..7e9dade5648 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -582,7 +582,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->pre_reset = NULL;	/* No HBA specific pre_set needed */
 	hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine,
 						clear interrupts */
-	hwif->intrproc = NULL;	/* Enable or Disable interrupt from drive */
 	hwif->maskproc = &sgiioc4_maskproc;	/* Mask on/off NIEN register */
 	hwif->quirkproc = NULL;
 	hwif->busproc = NULL;
-- 
cgit v1.2.3


From 7c0e26661dd104aaeb1391063cc986ddc0ac4aa4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:14 +0100
Subject: sc1200: remove pointless hwif lookup loop

Save PCI regs values for both IDE ports in one buffer, in order to eliminate
a needless and ugly loop across all hwifs, searching for our PCI device.

Partially based on the previous patch by Jeff Garzik.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sc1200.c | 108 +++++++++++++++++------------------------------
 1 file changed, 38 insertions(+), 70 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 707d5ff66b0..f0029b364c5 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -260,66 +260,39 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
 }
 
 #ifdef CONFIG_PM
-static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev)
-{
-	int	h;
-
-	for (h = 0; h < MAX_HWIFS; h++) {
-		ide_hwif_t *hwif = &ide_hwifs[h];
-		if (prev) {
-			if (hwif == prev)
-				prev = NULL;	// found previous, now look for next match
-		} else {
-			if (hwif && hwif->pci_dev == dev)
-				return hwif;	// found next match
-		}
-	}
-	return NULL;	// not found
-}
-
-typedef struct sc1200_saved_state_s {
-	__u32		regs[4];
-} sc1200_saved_state_t;
-
+struct sc1200_saved_state {
+	u32 regs[8];
+};
 
 static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
 {
-	ide_hwif_t		*hwif = NULL;
-
 	printk("SC1200: suspend(%u)\n", state.event);
 
+	/*
+	 * we only save state when going from full power to less
+	 */
 	if (state.event == PM_EVENT_ON) {
-		// we only save state when going from full power to less
-
-		//
-		// Loop over all interfaces that are part of this PCI device:
-		//
-		while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
-			sc1200_saved_state_t	*ss;
-			unsigned int		basereg, r;
-			//
-			// allocate a permanent save area, if not already allocated
-			//
-			ss = (sc1200_saved_state_t *)hwif->config_data;
-			if (ss == NULL) {
-				ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL);
-				if (ss == NULL)
-					return -ENOMEM;
-				hwif->config_data = (unsigned long)ss;
-			}
-			ss = (sc1200_saved_state_t *)hwif->config_data;
-			//
-			// Save timing registers:  this may be unnecessary if 
-			// BIOS also does it
-			//
-			basereg = hwif->channel ? 0x50 : 0x40;
-			for (r = 0; r < 4; ++r) {
-				pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]);
-			}
+		struct sc1200_saved_state *ss;
+		unsigned int r;
+
+		/*
+		 * allocate a permanent save area, if not already allocated
+		 */
+		ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
+		if (ss == NULL) {
+			ss = kmalloc(sizeof(*ss), GFP_KERNEL);
+			if (ss == NULL)
+				return -ENOMEM;
+			pci_set_drvdata(dev, ss);
 		}
-	}
 
-	/* You don't need to iterate over disks -- sysfs should have done that for you already */ 
+		/*
+		 * save timing registers
+		 * (this may be unnecessary if BIOS also does it)
+		 */
+		for (r = 0; r < 8; r++)
+			pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
+	}
 
 	pci_disable_device(dev);
 	pci_set_power_state(dev, pci_choose_state(dev, state));
@@ -328,30 +301,25 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
 
 static int sc1200_resume (struct pci_dev *dev)
 {
-	ide_hwif_t	*hwif = NULL;
-	int		i;
+	struct sc1200_saved_state *ss;
+	unsigned int r;
+	int i;
 
 	i = pci_enable_device(dev);
 	if (i)
 		return i;
 
-	//
-	// loop over all interfaces that are part of this pci device:
-	//
-	while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
-		unsigned int		basereg, r;
-		sc1200_saved_state_t	*ss = (sc1200_saved_state_t *)hwif->config_data;
-
-		//
-		// Restore timing registers:  this may be unnecessary if BIOS also does it
-		//
-		basereg = hwif->channel ? 0x50 : 0x40;
-		if (ss != NULL) {
-			for (r = 0; r < 4; ++r) {
-				pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
-			}
-		}
+	ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
+
+	/*
+	 * restore timing registers
+	 * (this may be unnecessary if BIOS also does it)
+	 */
+	if (ss) {
+		for (r = 0; r < 8; r++)
+			pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
 	}
+
 	return 0;
 }
 #endif
-- 
cgit v1.2.3


From ad4ba7dcef285c92a6856e0dd9feb780c1a79b87 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:18 +0100
Subject: pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()

* Move PIO programming code from pdcnew_set_mode() to pdcnew_set_pio_mode().

* Rename pdcnew_set_mode() to pdcnew_set_dma_mode().

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/pdc202xx_new.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 2b4f44e45a1..79ba8eff364 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -146,7 +146,7 @@ static struct udma_timing {
 	{ 0x1a, 0x01, 0xcb },	/* UDMA mode 6 */
 };
 
-static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
+static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	u8 adj			= (drive->dn & 1) ? 0x08 : 0x00;
@@ -177,7 +177,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
 				set_indexed_reg(hwif, 0x12 + adj,
 						udma_timings[mode].reg12);
 				break;
-
 			case XFER_MW_DMA_2:
 			case XFER_MW_DMA_1:
 			case XFER_MW_DMA_0:
@@ -186,18 +185,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
 				set_indexed_reg(hwif, 0x0f + adj,
 						mwdma_timings[mode].reg0f);
 				break;
-			case XFER_PIO_4:
-			case XFER_PIO_3:
-			case XFER_PIO_2:
-			case XFER_PIO_1:
-			case XFER_PIO_0:
-				set_indexed_reg(hwif, 0x0c + adj,
-						pio_timings[mode].reg0c);
-				set_indexed_reg(hwif, 0x0d + adj,
-						pio_timings[mode].reg0d);
-				set_indexed_reg(hwif, 0x13 + adj,
-						pio_timings[mode].reg13);
-				break;
 			default:
 				printk(KERN_ERR "pdc202xx_new: "
 				       "Unknown speed %d ignored\n", speed);
@@ -212,7 +199,14 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
 
 static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-	pdcnew_set_mode(drive, XFER_PIO_0 + pio);
+	ide_hwif_t *hwif = drive->hwif;
+	u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+	if (max_dma_rate(hwif->pci_dev) == 4) {
+		set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
+		set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
+		set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
+	}
 }
 
 static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
@@ -466,7 +460,7 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 {
 	hwif->set_pio_mode = &pdcnew_set_pio_mode;
-	hwif->set_dma_mode = &pdcnew_set_mode;
+	hwif->set_dma_mode = &pdcnew_set_dma_mode;
 
 	hwif->quirkproc = &pdcnew_quirkproc;
 	hwif->resetproc = &pdcnew_reset;
-- 
cgit v1.2.3


From 428c6440ef933a3d9df5adfeb2cbb3ea7ebb6a68 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:18 +0100
Subject: sis5513: factor out UDMA programming code

* Factor out UDMA programming code from sis_set_dma_mode() to per
  chipset family helpers: sis_{ata33,ata133}_program_udma_timings().

* Add sis_program_udma_timings() helper.

* Remove unneeded casts to 'unsigned long'.

* Minor cleanups.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sis5513.c | 78 +++++++++++++++++++++++++++--------------------
 1 file changed, 45 insertions(+), 33 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index d90b4291777..3f35386d9ca 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -305,11 +305,52 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	sis_program_timings(drive, XFER_PIO_0 + pio);
 }
 
-static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= hwif->pci_dev;
+	struct pci_dev *dev = drive->hwif->pci_dev;
+	u32 regdw = 0;
+	u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
+
+	pci_read_config_dword(dev, drive_pci, &regdw);
+
+	regdw |= 0x04;
+	regdw &= 0xfffff00f;
+	/* check if ATA133 enable */
+	clk = (regdw & 0x08) ? ATA_133 : ATA_100;
+	idx = mode - XFER_UDMA_0;
+	regdw |= cycle_time_value[clk][idx] << 4;
+	regdw |= cvs_time_value[clk][idx] << 8;
+
+	pci_write_config_dword(dev, drive_pci, regdw);
+}
+
+static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+	struct pci_dev *dev = drive->hwif->pci_dev;
+	u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
+
+	pci_read_config_byte(dev, drive_pci + 1, &reg);
 
+	/* force the UDMA bit on if we want to use UDMA */
+	reg |= 0x80;
+	/* clean reg cycle time bits */
+	reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
+	/* set reg cycle time bits */
+	reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
+
+	pci_write_config_byte(dev, drive_pci + 1, reg);
+}
+
+static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
+{
+	if (chipset_family >= ATA_133)	/* ATA_133 */
+		sis_ata133_program_udma_timings(drive, mode);
+	else				/* ATA_33/66/100a/100/133a */
+		sis_ata33_program_udma_timings(drive, mode);
+}
+
+static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
 	/* Config chip for mode */
 	switch(speed) {
 		case XFER_UDMA_6:
@@ -319,36 +360,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		case XFER_UDMA_2:
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
-			if (chipset_family >= ATA_133) {
-				u32 regdw = 0;
-				u8 drive_pci = sis_ata133_get_base(drive);
-
-				pci_read_config_dword(dev, drive_pci, &regdw);
-				regdw |= 0x04;
-				regdw &= 0xfffff00f;
-				/* check if ATA133 enable */
-				if (regdw & 0x08) {
-					regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
-					regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
-				} else {
-					regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
-					regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
-				}
-				pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
-			} else {
-				u8 drive_pci = 0x40 + drive->dn * 2, reg = 0;
-
-				pci_read_config_byte(dev, drive_pci+1, &reg);
-				/* Force the UDMA bit on if we want to use UDMA */
-				reg |= 0x80;
-				/* clean reg cycle time bits */
-				reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
-					 << cycle_time_offset[chipset_family]);
-				/* set reg cycle time bits */
-				reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
-					<< cycle_time_offset[chipset_family];
-				pci_write_config_byte(dev, drive_pci+1, reg);
-			}
+			sis_program_udma_timings(drive, speed);
 			break;
 		case XFER_MW_DMA_2:
 		case XFER_MW_DMA_1:
-- 
cgit v1.2.3


From 4db90a145292327b95b03f6dcd3352327235cc36 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:18 +0100
Subject: ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag

* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide
  what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate().

* Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it
  (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old,
  serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode
  methods in host drivers that don't (IDE core code guarantees that
  ->set_dma_mode will be called only for modes which are present
  in SWDMA/MWDMA/UDMA masks).

While at it:

* Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in
  hpt34x/hpt366/pdc202xx_old/serverworks host driver.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/aec62xx.c      | 13 ++++++++++---
 drivers/ide/pci/alim15x3.c     |  3 ---
 drivers/ide/pci/amd74xx.c      |  1 +
 drivers/ide/pci/atiixp.c       |  3 ---
 drivers/ide/pci/cmd64x.c       |  2 --
 drivers/ide/pci/cs5520.c       |  1 +
 drivers/ide/pci/cs5530.c       |  2 --
 drivers/ide/pci/cs5535.c       |  2 +-
 drivers/ide/pci/hpt34x.c       | 12 +++++++-----
 drivers/ide/pci/hpt366.c       | 19 +++++++++++--------
 drivers/ide/pci/it8213.c       | 21 ++++-----------------
 drivers/ide/pci/pdc202xx_new.c | 38 ++++++++++++--------------------------
 drivers/ide/pci/pdc202xx_old.c | 12 +++++++-----
 drivers/ide/pci/piix.c         | 17 ++++-------------
 drivers/ide/pci/sc1200.c       |  2 --
 drivers/ide/pci/scc_pata.c     | 14 +-------------
 drivers/ide/pci/serverworks.c  | 17 ++++++++++-------
 drivers/ide/pci/siimage.c      | 29 ++++++++---------------------
 drivers/ide/pci/sis5513.c      | 23 ++++-------------------
 drivers/ide/pci/sl82c105.c     | 40 ++++++++++++++++------------------------
 drivers/ide/pci/slc90e66.c     | 14 ++------------
 drivers/ide/pci/tc86c001.c     |  3 ++-
 drivers/ide/pci/triflex.c      |  2 --
 drivers/ide/pci/via82cxxx.c    |  1 +
 24 files changed, 102 insertions(+), 189 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 44268504ae4..7f4d1857d55 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -202,6 +202,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.host_flags	= IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -211,6 +212,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
 		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
+				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -220,7 +222,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA,
+		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_ABUSE_SET_DMA_MODE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA4,
@@ -228,7 +231,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.name		= "AEC6280",
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
+				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
@@ -237,7 +242,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_ABUSE_SET_DMA_MODE |
+				  IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index ce293936af4..49aa82e412b 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -402,9 +402,6 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	u8 tmpbyte		= 0x00;
 	int m5229_udma		= (hwif->channel) ? 0x57 : 0x56;
 
-	if (speed < XFER_PIO_0)
-		return;
-
 	if (speed == XFER_UDMA_6)
 		speed1 = 0x47;
 
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 8d4125ec252..cee51fdafcf 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -266,6 +266,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
 #define IDE_HFLAGS_AMD \
 	(IDE_HFLAG_PIO_NO_BLACKLIST | \
 	 IDE_HFLAG_PIO_NO_DOWNGRADE | \
+	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
 	 IDE_HFLAG_POST_SET_MODE | \
 	 IDE_HFLAG_IO_32BIT | \
 	 IDE_HFLAG_UNMASK_IRQS | \
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index ef8e0164ef7..5ae26564fb7 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -133,9 +133,6 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	u32 tmp32;
 	u16 tmp16;
 
-	if (speed < XFER_MW_DMA_0)
-		return;
-
 	spin_lock_irqsave(&atiixp_lock, flags);
 
 	save_mdma_mode[drive->dn] = 0;
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index f3613bac9db..0b1e9479f01 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -322,8 +322,6 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	case XFER_MW_DMA_0:
 		program_cycle_times(drive, 480, 215);
 		break;
-	default:
-		return;
 	}
 
 	if (speed >= XFER_SW_DMA_0)
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 0466462fd21..d1a91bcb5b2 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -137,6 +137,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
 				  IDE_HFLAG_CS5520 |		\
 				  IDE_HFLAG_VDMA |		\
 				  IDE_HFLAG_NO_ATAPI_DMA |	\
+				  IDE_HFLAG_ABUSE_SET_DMA_MODE |\
 				  IDE_HFLAG_BOOTABLE,		\
 		.pio_mask	= ATA_PIO4,			\
 	}
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 547690395ee..df5966b3346 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -116,8 +116,6 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		case XFER_MW_DMA_0:	timings = 0x00077771; break;
 		case XFER_MW_DMA_1:	timings = 0x00012121; break;
 		case XFER_MW_DMA_2:	timings = 0x00002020; break;
-		default:
-			return;
 	}
 	basereg = CS5530_BASEREG(drive->hwif);
 	reg = inl(basereg + 4);			/* get drive0 config register */
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index ddcbeba671e..50b3d7791f5 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -190,7 +190,7 @@ static const struct ide_port_info cs5535_chipset __devinitdata = {
 	.name		= "CS5535",
 	.init_hwif	= init_hwif_cs5535,
 	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE |
-			  IDE_HFLAG_BOOTABLE,
+			  IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE,
 	.pio_mask	= ATA_PIO4,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA4,
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index ae6307fae4f..dfba0d13fcd 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -129,14 +129,18 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
 	hwif->set_dma_mode = &hpt34x_set_mode;
 }
 
+#define IDE_HFLAGS_HPT34X \
+	(IDE_HFLAG_NO_ATAPI_DMA | \
+	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+	 IDE_HFLAG_NO_AUTODMA)
+
 static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
 	{ /* 0 */
 		.name		= "HPT343",
 		.init_chipset	= init_chipset_hpt34x,
 		.init_hwif	= init_hwif_hpt34x,
 		.extra		= 16,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_NO_AUTODMA,
+		.host_flags	= IDE_HFLAGS_HPT34X,
 		.pio_mask	= ATA_PIO5,
 	},
 	{ /* 1 */
@@ -144,9 +148,7 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_hpt34x,
 		.init_hwif	= init_hwif_hpt34x,
 		.extra		= 16,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_NO_AUTODMA |
-				  IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
 		.pio_mask	= ATA_PIO5,
 #ifdef CONFIG_HPT34X_AUTODMA
 		.swdma_mask	= ATA_SWDMA2,
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 24d645751e0..3777fb8c804 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1461,6 +1461,11 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
 	return 0;
 }
 
+#define IDE_HFLAGS_HPT3XX \
+	(IDE_HFLAG_NO_ATAPI_DMA | \
+	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+	 IDE_HFLAG_OFF_BOARD)
+
 static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 	{	/* 0 */
 		.name		= "HPT36x",
@@ -1475,9 +1480,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		 */
 		.enablebits	= {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
 		.extra		= 240,
-		.host_flags	= IDE_HFLAG_SINGLE |
-				  IDE_HFLAG_NO_ATAPI_DMA |
-				  IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 	},{	/* 1 */
@@ -1487,7 +1490,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_hpt366,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.extra		= 240,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT3XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 	},{	/* 2 */
@@ -1497,7 +1500,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_hpt366,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.extra		= 240,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT3XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 	},{	/* 3 */
@@ -1507,7 +1510,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_hpt366,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.extra		= 240,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT3XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 	},{	/* 4 */
@@ -1518,7 +1521,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.udma_mask	= ATA_UDMA5,
 		.extra		= 240,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT3XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 	},{	/* 5 */
@@ -1528,7 +1531,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_hpt366,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
 		.extra		= 240,
-		.host_flags	= IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_HPT3XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 	}
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 90b52ed37bf..2a0f45c4f4c 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -101,24 +101,11 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	pci_read_config_byte(dev, 0x54, &reg54);
 	pci_read_config_byte(dev, 0x55, &reg55);
 
-	switch(speed) {
-		case XFER_UDMA_6:
-		case XFER_UDMA_4:
-		case XFER_UDMA_2:	u_speed = 2 << (drive->dn * 4); break;
-		case XFER_UDMA_5:
-		case XFER_UDMA_3:
-		case XFER_UDMA_1:	u_speed = 1 << (drive->dn * 4); break;
-		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
-			break;
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_SW_DMA_2:
-			break;
-		default:
-			return;
-	}
-
 	if (speed >= XFER_UDMA_0) {
+		u8 udma = speed - XFER_UDMA_0;
+
+		u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
+
 		if (!(reg48 & u_flag))
 			pci_write_config_byte(dev, 0x48, reg48 | u_flag);
 		if (speed >= XFER_UDMA_5) {
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 79ba8eff364..ef4a99b99d1 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -162,32 +162,18 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	if (max_dma_rate(hwif->pci_dev) == 4) {
 		u8 mode = speed & 0x07;
 
-		switch (speed) {
-			case XFER_UDMA_6:
-			case XFER_UDMA_5:
-			case XFER_UDMA_4:
-			case XFER_UDMA_3:
-			case XFER_UDMA_2:
-			case XFER_UDMA_1:
-			case XFER_UDMA_0:
-				set_indexed_reg(hwif, 0x10 + adj,
-						udma_timings[mode].reg10);
-				set_indexed_reg(hwif, 0x11 + adj,
-						udma_timings[mode].reg11);
-				set_indexed_reg(hwif, 0x12 + adj,
-						udma_timings[mode].reg12);
-				break;
-			case XFER_MW_DMA_2:
-			case XFER_MW_DMA_1:
-			case XFER_MW_DMA_0:
-				set_indexed_reg(hwif, 0x0e + adj,
-						mwdma_timings[mode].reg0e);
-				set_indexed_reg(hwif, 0x0f + adj,
-						mwdma_timings[mode].reg0f);
-				break;
-			default:
-				printk(KERN_ERR "pdc202xx_new: "
-				       "Unknown speed %d ignored\n", speed);
+		if (speed >= XFER_UDMA_0) {
+			set_indexed_reg(hwif, 0x10 + adj,
+					udma_timings[mode].reg10);
+			set_indexed_reg(hwif, 0x11 + adj,
+					udma_timings[mode].reg11);
+			set_indexed_reg(hwif, 0x12 + adj,
+					udma_timings[mode].reg12);
+		} else {
+			set_indexed_reg(hwif, 0x0e + adj,
+					mwdma_timings[mode].reg0e);
+			set_indexed_reg(hwif, 0x0f + adj,
+					mwdma_timings[mode].reg0f);
 		}
 	} else if (speed == XFER_UDMA_2) {
 		/* Set tHOLD bit to 0 if using UDMA mode 2 */
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 22c7a7533b6..67b2781e221 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -375,6 +375,11 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 	}
 }
 
+#define IDE_HFLAGS_PDC202XX \
+	(IDE_HFLAG_ERROR_STOPS_FIFO | \
+	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+	 IDE_HFLAG_OFF_BOARD)
+
 #define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \
 	{ \
 		.name		= name_str, \
@@ -382,9 +387,7 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 		.init_hwif	= init_hwif_pdc202xx, \
 		.init_dma	= init_dma_pdc202xx, \
 		.extra		= 48, \
-		.host_flags	= IDE_HFLAG_ERROR_STOPS_FIFO | \
-				  extra_flags | \
-				  IDE_HFLAG_OFF_BOARD, \
+		.host_flags	= IDE_HFLAGS_PDC202XX | extra_flags, \
 		.pio_mask	= ATA_PIO4, \
 		.mwdma_mask	= ATA_MWDMA2, \
 		.udma_mask	= udma, \
@@ -397,8 +400,7 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
 		.init_hwif	= init_hwif_pdc202xx,
 		.init_dma	= init_dma_pdc202xx,
 		.extra		= 16,
-		.host_flags	= IDE_HFLAG_ERROR_STOPS_FIFO |
-				  IDE_HFLAG_OFF_BOARD,
+		.host_flags	= IDE_HFLAGS_PDC202XX,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA2,
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 27781d294ce..bd6d3f77d30 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -203,20 +203,11 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	pci_read_config_byte(dev, 0x54, &reg54);
 	pci_read_config_byte(dev, 0x55, &reg55);
 
-	switch(speed) {
-		case XFER_UDMA_4:
-		case XFER_UDMA_2:	u_speed = 2 << (drive->dn * 4); break;
-		case XFER_UDMA_5:
-		case XFER_UDMA_3:
-		case XFER_UDMA_1:	u_speed = 1 << (drive->dn * 4); break;
-		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_SW_DMA_2:	break;
-		default:		return;
-	}
-
 	if (speed >= XFER_UDMA_0) {
+		u8 udma = speed - XFER_UDMA_0;
+
+		u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
+
 		if (!(reg48 & u_flag))
 			pci_write_config_byte(dev, 0x48, reg48 | u_flag);
 		if (speed == XFER_UDMA_5) {
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index f0029b364c5..569a8fe70d3 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -185,8 +185,6 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
 				case PCI_CLK_66:	timings = 0x00015151;	break;
 			}
 			break;
-		default:
-			return;
 	}
 
 	if (unit == 0) {			/* are we configuring drive0? */
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index ebb7132b9b8..24a85bbcd2a 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -254,19 +254,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		offset = 0; /* 100MHz */
 	}
 
-	switch (speed) {
-	case XFER_UDMA_6:
-	case XFER_UDMA_5:
-	case XFER_UDMA_4:
-	case XFER_UDMA_3:
-	case XFER_UDMA_2:
-	case XFER_UDMA_1:
-	case XFER_UDMA_0:
-		idx = speed - XFER_UDMA_0;
-		break;
-	default:
-		return;
-	}
+	idx = speed - XFER_UDMA_0;
 
 	jcactsel = JCACTSELtbl[offset][idx];
 	if (is_slave) {
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index a7280311357..e9bd269547b 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -366,12 +366,17 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
 	}
 }
 
+#define IDE_HFLAGS_SVWKS \
+	(IDE_HFLAG_LEGACY_IRQS | \
+	 IDE_HFLAG_ABUSE_SET_DMA_MODE | \
+	 IDE_HFLAG_BOOTABLE)
+
 static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
 	{	/* 0 */
 		.name		= "SvrWks OSB4",
 		.init_chipset	= init_chipset_svwks,
 		.init_hwif	= init_hwif_svwks,
-		.host_flags	= IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
+		.host_flags	= IDE_HFLAGS_SVWKS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= 0x00, /* UDMA is problematic on OSB4 */
@@ -379,7 +384,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
 		.name		= "SvrWks CSB5",
 		.init_chipset	= init_chipset_svwks,
 		.init_hwif	= init_hwif_svwks,
-		.host_flags	= IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
+		.host_flags	= IDE_HFLAGS_SVWKS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
@@ -387,7 +392,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
 		.name		= "SvrWks CSB6",
 		.init_chipset	= init_chipset_svwks,
 		.init_hwif	= init_hwif_svwks,
-		.host_flags	= IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
+		.host_flags	= IDE_HFLAGS_SVWKS,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
@@ -395,8 +400,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
 		.name		= "SvrWks CSB6",
 		.init_chipset	= init_chipset_svwks,
 		.init_hwif	= init_hwif_svwks,
-		.host_flags	= IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
-				  IDE_HFLAG_BOOTABLE,
+		.host_flags	= IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
@@ -404,8 +408,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
 		.name		= "SvrWks HT1000",
 		.init_chipset	= init_chipset_svwks,
 		.init_hwif	= init_hwif_svwks,
-		.host_flags	= IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
-				  IDE_HFLAG_BOOTABLE,
+		.host_flags	= IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 5709c252543..7b45eaf5afd 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -278,27 +278,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
 
 	scsc = is_sata(hwif) ? 1 : scsc;
 
-	switch(speed) {
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_MW_DMA_0:
-			multi = dma[speed - XFER_MW_DMA_0];
-			mode |= ((unit) ? 0x20 : 0x02);
-			break;
-		case XFER_UDMA_6:
-		case XFER_UDMA_5:
-		case XFER_UDMA_4:
-		case XFER_UDMA_3:
-		case XFER_UDMA_2:
-		case XFER_UDMA_1:
-		case XFER_UDMA_0:
-			multi = dma[2];
-			ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
-					   (ultra5[speed - XFER_UDMA_0]));
-			mode |= ((unit) ? 0x30 : 0x03);
-			break;
-		default:
-			return;
+	if (speed >= XFER_UDMA_0) {
+		multi = dma[2];
+		ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] :
+				 ultra5[speed - XFER_UDMA_0]);
+		mode |= (unit ? 0x30 : 0x03);
+	} else {
+		multi = dma[speed - XFER_MW_DMA_0];
+		mode |= (unit ? 0x20 : 0x02);
 	}
 
 	if (hwif->mmio) {
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 3f35386d9ca..85d36996e6a 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -351,25 +351,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
 
 static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
-	/* Config chip for mode */
-	switch(speed) {
-		case XFER_UDMA_6:
-		case XFER_UDMA_5:
-		case XFER_UDMA_4:
-		case XFER_UDMA_3:
-		case XFER_UDMA_2:
-		case XFER_UDMA_1:
-		case XFER_UDMA_0:
-			sis_program_udma_timings(drive, speed);
-			break;
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_MW_DMA_0:
-			sis_program_timings(drive, speed);
-			break;
-		default:
-			break;
-	}
+	if (speed >= XFER_UDMA_0)
+		sis_program_udma_timings(drive, speed);
+	else
+		sis_program_timings(drive, speed);
 }
 
 static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 147d783f752..069f104fdce 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -115,32 +115,24 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
  	DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
 	     drive->name, ide_xfer_verbose(speed)));
 
-	switch (speed) {
-	case XFER_MW_DMA_2:
-	case XFER_MW_DMA_1:
-	case XFER_MW_DMA_0:
-		drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
+	drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
 
-		/*
-		 * Store the DMA timings so that we can actually program
-		 * them when DMA will be turned on...
-		 */
-		drive->drive_data &= 0x0000ffff;
-		drive->drive_data |= (unsigned long)drv_ctrl << 16;
+	/*
+	 * Store the DMA timings so that we can actually program
+	 * them when DMA will be turned on...
+	 */
+	drive->drive_data &= 0x0000ffff;
+	drive->drive_data |= (unsigned long)drv_ctrl << 16;
 
-		/*
-		 * If we are already using DMA, we just reprogram
-		 * the drive control register.
-		 */
-		if (drive->using_dma) {
-			struct pci_dev *dev	= HWIF(drive)->pci_dev;
-			int reg 		= 0x44 + drive->dn * 4;
-
-			pci_write_config_word(dev, reg, drv_ctrl);
-		}
-		break;
-	default:
-		return;
+	/*
+	 * If we are already using DMA, we just reprogram
+	 * the drive control register.
+	 */
+	if (drive->using_dma) {
+		struct pci_dev *dev	= HWIF(drive)->pci_dev;
+		int reg 		= 0x44 + drive->dn * 4;
+
+		pci_write_config_word(dev, reg, drv_ctrl);
 	}
 }
 
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index eb4445b229e..dbbb46819a2 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -91,19 +91,9 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	pci_read_config_word(dev, 0x48, &reg48);
 	pci_read_config_word(dev, 0x4a, &reg4a);
 
-	switch(speed) {
-		case XFER_UDMA_4:	u_speed = 4 << (drive->dn * 4); break;
-		case XFER_UDMA_3:	u_speed = 3 << (drive->dn * 4); break;
-		case XFER_UDMA_2:	u_speed = 2 << (drive->dn * 4); break;
-		case XFER_UDMA_1:	u_speed = 1 << (drive->dn * 4); break;
-		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_SW_DMA_2:	break;
-		default:		return;
-	}
-
 	if (speed >= XFER_UDMA_0) {
+		u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
+
 		if (!(reg48 & u_flag))
 			pci_write_config_word(dev, 0x48, reg48|u_flag);
 		/* FIXME: (reg4a & a_speed) ? */
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index a66ebd14664..e1faf6c2fe1 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -222,7 +222,8 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
 	.name		= "TC86C001",
 	.init_chipset	= init_chipset_tc86c001,
 	.init_hwif	= init_hwif_tc86c001,
-	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
+	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
+			  IDE_HFLAG_ABUSE_SET_DMA_MODE,
 	.pio_mask	= ATA_PIO4,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA4,
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index a227c41d23a..ae52a96a1cf 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -81,8 +81,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 		case XFER_PIO_0:
 			timing = 0x0808;
 			break;
-		default:
-			return;
 	}
 
 	triflex_timings &= ~(0xFFFF << (16 * unit));
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a0d3c16b68e..4b32c90f489 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -439,6 +439,7 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = {
 	.enablebits	= { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
 	.host_flags	= IDE_HFLAG_PIO_NO_BLACKLIST |
 			  IDE_HFLAG_PIO_NO_DOWNGRADE |
+			  IDE_HFLAG_ABUSE_SET_DMA_MODE |
 			  IDE_HFLAG_POST_SET_MODE |
 			  IDE_HFLAG_IO_32BIT |
 			  IDE_HFLAG_BOOTABLE,
-- 
cgit v1.2.3


From 4eed504d140319d6c1c7e0a5b7a9bf41dabf7cea Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 25 Jan 2008 22:17:18 +0100
Subject: sc1200: move DMA timings to timing tables

Based on pata_sc1200.c.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sc1200.c | 62 +++++++++++++-----------------------------------
 1 file changed, 17 insertions(+), 45 deletions(-)

(limited to 'drivers/ide/pci')

diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 569a8fe70d3..fef20bd4aa7 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -135,57 +135,29 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
 	unsigned short		pci_clock;
 	unsigned int		basereg = hwif->channel ? 0x50 : 0x40;
 
+	static const u32 udma_timing[3][3] = {
+		{ 0x00921250, 0x00911140, 0x00911030 },
+		{ 0x00932470, 0x00922260, 0x00922140 },
+		{ 0x009436a1, 0x00933481, 0x00923261 },
+	};
+
+	static const u32 mwdma_timing[3][3] = {
+		{ 0x00077771, 0x00012121, 0x00002020 },
+		{ 0x000bbbb2, 0x00024241, 0x00013131 },
+		{ 0x000ffff3, 0x00035352, 0x00015151 },
+	};
+
 	pci_clock = sc1200_get_pci_clock();
 
 	/*
 	 * Note that each DMA mode has several timings associated with it.
 	 * The correct timing depends on the fast PCI clock freq.
 	 */
-	timings = 0;
-	switch (mode) {
-		case XFER_UDMA_0:
-			switch (pci_clock) {
-				case PCI_CLK_33:	timings = 0x00921250;	break;
-				case PCI_CLK_48:	timings = 0x00932470;	break;
-				case PCI_CLK_66:	timings = 0x009436a1;	break;
-			}
-			break;
-		case XFER_UDMA_1:
-			switch (pci_clock) {
-				case PCI_CLK_33:	timings = 0x00911140;	break;
-				case PCI_CLK_48:	timings = 0x00922260;	break;
-				case PCI_CLK_66:	timings = 0x00933481;	break;
-			}
-			break;
-		case XFER_UDMA_2:
-			switch (pci_clock) {
-				case PCI_CLK_33:	timings = 0x00911030;	break;
-				case PCI_CLK_48:	timings = 0x00922140;	break;
-				case PCI_CLK_66:	timings = 0x00923261;	break;
-			}
-			break;
-		case XFER_MW_DMA_0:
-			switch (pci_clock) {
-				case PCI_CLK_33:	timings = 0x00077771;	break;
-				case PCI_CLK_48:	timings = 0x000bbbb2;	break;
-				case PCI_CLK_66:	timings = 0x000ffff3;	break;
-			}
-			break;
-		case XFER_MW_DMA_1:
-			switch (pci_clock) {
-				case PCI_CLK_33:	timings = 0x00012121;	break;
-				case PCI_CLK_48:	timings = 0x00024241;	break;
-				case PCI_CLK_66:	timings = 0x00035352;	break;
-			}
-			break;
-		case XFER_MW_DMA_2:
-			switch (pci_clock) {
-				case PCI_CLK_33:	timings = 0x00002020;	break;
-				case PCI_CLK_48:	timings = 0x00013131;	break;
-				case PCI_CLK_66:	timings = 0x00015151;	break;
-			}
-			break;
-	}
+
+	if (mode >= XFER_UDMA_0)
+		timings =  udma_timing[pci_clock][mode - XFER_UDMA_0];
+	else
+		timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
 
 	if (unit == 0) {			/* are we configuring drive0? */
 		pci_read_config_dword(hwif->pci_dev, basereg+4, &reg);
-- 
cgit v1.2.3