From 28cfd8af52a9ed4e5bd1751ea6bc0b8c870f68ec Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 24 Jul 2008 22:53:31 +0200 Subject: ide: include PCI device name in messages from IDE PCI host drivers While at it: * Apply small fixes to messages (s/dma/DMA/, remove trailing '.', etc). * Fix printk() call in ide_setup_pci_baseregs() to use KERN_INFO. * Move printk() call from ide_pci_clear_simplex() to the caller. * Cleanup do_ide_setup_pci_device() a bit. * amd74xx.c: remove superfluous PCI device revision information. * hpt366.c: fix two printk() calls in ->init_chipset to use KERN_INFO. * pdc202xx_new.c: fix printk() call in ->init_chipset to use KERN_INFO. * pdc202xx_old.c: fix driver message in pdc202xx_init_one(). * via82cxxx.c: fix driver warning message in via_init_one(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/amd74xx.c | 11 +++-- drivers/ide/pci/generic.c | 4 +- drivers/ide/pci/hpt366.c | 31 ++++++++----- drivers/ide/pci/it821x.c | 11 +++-- drivers/ide/pci/pdc202xx_new.c | 21 +++++---- drivers/ide/pci/pdc202xx_old.c | 9 ++-- drivers/ide/pci/serverworks.c | 3 +- drivers/ide/pci/siimage.c | 7 +-- drivers/ide/pci/sis5513.c | 17 +++++--- drivers/ide/pci/trm290.c | 4 +- drivers/ide/pci/via82cxxx.c | 13 +++--- drivers/ide/setup-pci.c | 99 ++++++++++++++++++++++++------------------ 12 files changed, 131 insertions(+), 99 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index a91f2e873ba..2b118f80fab 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -129,9 +129,9 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev, amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); for (i = 24; i >= 0; i -= 8) if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { - printk(KERN_WARNING "%s: BIOS didn't set cable bits " - "correctly. Enabling workaround.\n", - name); + printk(KERN_WARNING "%s %s: BIOS didn't set cable bits " + "correctly. Enabling workaround.\n", + name, pci_name(dev)); amd_80w |= (1 << (1 - (i >> 4))); } } @@ -280,9 +280,8 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ d.udma_mask = ATA_UDMA5; } - printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n", - d.name, pci_name(dev), dev->revision, - amd_dma[fls(d.udma_mask) - 1]); + printk(KERN_INFO "%s %s: UDMA%s controller\n", + d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); /* * Determine the system bus clock. diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 81fc171f8ff..e034e21af7f 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -134,8 +134,8 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi u16 command; pci_read_config_word(dev, PCI_COMMAND, &command); if (!(command & PCI_COMMAND_IO)) { - printk(KERN_INFO "Skipping disabled %s IDE " - "controller.\n", d->name); + printk(KERN_INFO "%s %s: skipping disabled " + "controller\n", d->name, pci_name(dev)); goto out; } } diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 398808905f9..b8004c331ed 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1044,8 +1044,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha if ((temp & 0xFFFFF000) != 0xABCDE000) { int i; - printk(KERN_WARNING "%s: no clock data saved by BIOS\n", - name); + printk(KERN_WARNING "%s %s: no clock data saved by " + "BIOS\n", name, pci_name(dev)); /* Calculate the average value of f_CNT. */ for (temp = i = 0; i < 128; i++) { @@ -1070,8 +1070,9 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha else pci_clk = 66; - printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, " - "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk); + printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, " + "assuming %d MHz PCI\n", name, pci_name(dev), + dpll_clk, f_cnt, pci_clk); } else { u32 itr1 = 0; @@ -1137,7 +1138,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha } if (info->timings->clock_table[clock] == NULL) { - printk(KERN_ERR "%s: unknown bus timing!\n", name); + printk(KERN_ERR "%s %s: unknown bus timing!\n", + name, pci_name(dev)); return -EIO; } @@ -1163,16 +1165,19 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha f_low += adjust >> 1; } if (adjust == 8) { - printk(KERN_ERR "%s: DPLL did not stabilize!\n", name); + printk(KERN_ERR "%s %s: DPLL did not stabilize!\n", + name, pci_name(dev)); return -EIO; } - printk("%s: using %d MHz DPLL clock\n", name, dpll_clk); + printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n", + name, pci_name(dev), dpll_clk); } else { /* Mark the fact that we're not using the DPLL. */ dpll_clk = 0; - printk("%s: using %d MHz PCI clock\n", name, pci_clk); + printk(KERN_INFO "%s %s: using %d MHz PCI clock\n", + name, pci_name(dev), pci_clk); } /* Store the clock frequencies. */ @@ -1357,7 +1362,8 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) if (dev2->irq != dev->irq) { /* FIXME: we need a core pci_set_interrupt() */ dev2->irq = dev->irq; - printk(KERN_INFO "HPT374: PCI config space interrupt fixed\n"); + printk(KERN_INFO "HPT374 %s: PCI config space interrupt " + "fixed\n", pci_name(dev2)); } } @@ -1392,8 +1398,8 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2); if (pin1 != pin2 && dev->irq == dev2->irq) { - printk(KERN_INFO "HPT36x: onboard version of chipset, " - "pin1=%d pin2=%d\n", pin1, pin2); + printk(KERN_INFO "HPT36x %s: onboard version of chipset, " + "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2); return 1; } @@ -1591,7 +1597,8 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL); if (dyn_info == NULL) { - printk(KERN_ERR "%s: out of memory!\n", d.name); + printk(KERN_ERR "%s %s: out of memory!\n", + d.name, pci_name(dev)); pci_dev_put(dev2); return -ENOMEM; } diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index c5c91f2109d..4ce5db98f89 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -569,7 +569,8 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) idev->timing10 = 1; hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; if (idev->smart == 0) - printk(KERN_WARNING "it821x: Revision 0x10, workarounds activated.\n"); + printk(KERN_WARNING "it821x %s: revision 0x10, " + "workarounds activated\n", pci_name(dev)); } if (idev->smart == 0) { @@ -609,11 +610,13 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha /* Force the card into bypass mode if so requested */ if (it8212_noraid) { - printk(KERN_INFO "it8212: forcing bypass mode.\n"); + printk(KERN_INFO "it821x %s: forcing bypass mode\n", + pci_name(dev)); it8212_disable_raid(dev); } pci_read_config_byte(dev, 0x50, &conf); - printk(KERN_INFO "it821x: controller in %s mode.\n", mode[conf & 1]); + printk(KERN_INFO "it821x %s: controller in %s mode\n", + pci_name(dev), mode[conf & 1]); return 0; } @@ -654,7 +657,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL); if (itdevs == NULL) { - printk(KERN_ERR "it821x: out of memory\n"); + printk(KERN_ERR "it821x %s: out of memory\n", pci_name(dev)); return -ENOMEM; } diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 9881a1a8b89..4c2b669d7de 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -358,12 +358,13 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha * registers setting. */ pll_input = detect_pll_input_clock(dma_base); - printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000); + printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n", + name, pci_name(dev), pll_input / 1000); /* Sanity check */ if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { - printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n", - name, pll_input); + printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!" + "\n", name, pci_name(dev), pll_input); goto out; } @@ -399,7 +400,8 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha r = 0x00; } else { /* Invalid ratio */ - printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio); + printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n", + name, pci_name(dev), ratio); goto out; } @@ -409,7 +411,8 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha if (unlikely(f < 0 || f > 127)) { /* Invalid F */ - printk(KERN_ERR "%s: F[%d] invalid!\n", name, f); + printk(KERN_ERR "%s %s: F[%d] invalid!\n", + name, pci_name(dev), f); goto out; } @@ -455,8 +458,8 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) if (dev2->irq != dev->irq) { dev2->irq = dev->irq; - printk(KERN_INFO "PDC20270: PCI config space " - "interrupt fixed\n"); + printk(KERN_INFO "PDC20270 %s: PCI config space " + "interrupt fixed\n", pci_name(dev)); } return dev2; @@ -535,8 +538,8 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de bridge->vendor == PCI_VENDOR_ID_INTEL && (bridge->device == PCI_DEVICE_ID_INTEL_I960 || bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { - printk(KERN_INFO "PDC20276: attached to I2O RAID controller, " - "skipping\n"); + printk(KERN_INFO "PDC20276 %s: attached to I2O RAID controller," + " skipping\n", pci_name(dev)); return -ENODEV; } diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 17d99ce273a..5cb2731047e 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -304,8 +304,8 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, if (irq != irq2) { pci_write_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */ - printk(KERN_INFO "%s: PCI config space interrupt " - "mirror fixed\n", name); + printk(KERN_INFO "%s %s: PCI config space interrupt " + "mirror fixed\n", name, pci_name(dev)); } } } @@ -406,8 +406,9 @@ static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_dev bridge->vendor == PCI_VENDOR_ID_INTEL && (bridge->device == PCI_DEVICE_ID_INTEL_I960 || bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { - printk(KERN_INFO "ide: Skipping Promise PDC20265 " - "attached to I2O RAID controller\n"); + printk(KERN_INFO "pdc202xx_old %s: skipping Promise " + "PDC20265 attached to I2O RAID controller\n", + pci_name(dev)); return -ENODEV; } } diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index eca52fede28..1106ff44cde 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -188,7 +188,8 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha pci_read_config_dword(isa_dev, 0x64, ®); reg &= ~0x00002000; /* disable 600ns interrupt mask */ if(!(reg & 0x00004000)) - printk(KERN_DEBUG "%s: UDMA not BIOS enabled.\n", name); + printk(KERN_DEBUG "%s %s: UDMA not BIOS " + "enabled.\n", name, pci_name(dev)); reg |= 0x00004000; /* enable UDMA/33 support */ pci_write_config_dword(isa_dev, 0x64, reg); } diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index f2e4dac9b71..fc29f1ca503 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -539,7 +539,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, { "== 100", "== 133", "== 2X PCI", "DISABLED!" }; tmp >>= 4; - printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]); + printk(KERN_INFO "%s %s: BASE CLOCK %s\n", + name, pci_name(dev), clk_str[tmp & 3]); } return 0; @@ -779,8 +780,8 @@ static int __devinit siimage_init_one(struct pci_dev *dev, * seem to get terminally confused in the PCI spaces. */ if (!request_mem_region(bar5, barsize, d.name)) { - printk(KERN_WARNING "siimage: IDE controller MMIO " - "ports not available.\n"); + printk(KERN_WARNING "siimage %s: MMIO ports not " + "available\n", pci_name(dev)); } else { ioaddr = ioremap(bar5, barsize); if (ioaddr == NULL) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index f3cf7c6c0cc..518d8ab413f 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -380,8 +380,9 @@ static int __devinit sis_find_family(struct pci_dev *dev) } pci_dev_put(host); - printk(KERN_INFO "SIS5513: %s %s controller\n", - SiSHostChipInfo[i].name, chipset_capability[chipset_family]); + printk(KERN_INFO "SIS5513 %s: %s %s controller\n", + pci_name(dev), SiSHostChipInfo[i].name, + chipset_capability[chipset_family]); } if (!chipset_family) { /* Belongs to pci-quirks */ @@ -396,7 +397,8 @@ static int __devinit sis_find_family(struct pci_dev *dev) pci_write_config_dword(dev, 0x54, idemisc); if (trueid == 0x5518) { - printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n"); + printk(KERN_INFO "SIS5513 %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n", + pci_name(dev)); chipset_family = ATA_133; /* Check for 5513 compability mapping @@ -405,7 +407,8 @@ static int __devinit sis_find_family(struct pci_dev *dev) */ if ((idemisc & 0x40000000) == 0) { pci_write_config_dword(dev, 0x54, idemisc | 0x40000000); - printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n"); + printk(KERN_INFO "SIS5513 %s: Switching to 5513 register mapping\n", + pci_name(dev)); } } } @@ -429,10 +432,12 @@ static int __devinit sis_find_family(struct pci_dev *dev) pci_dev_put(lpc_bridge); if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { - printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n"); + printk(KERN_INFO "SIS5513 %s: SiS 961B MuTIOL IDE UDMA133 controller\n", + pci_name(dev)); chipset_family = ATA_133a; } else { - printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n"); + printk(KERN_INFO "SIS5513 %s: SiS 961 MuTIOL IDE UDMA100 controller\n", + pci_name(dev)); chipset_family = ATA_100; } } diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index 449f4de9a70..7bda5ed92e1 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -245,10 +245,10 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) u8 reg = 0; if ((dev->class & 5) && cfg_base) - printk(KERN_INFO "TRM290: chip"); + printk(KERN_INFO "TRM290 %s: chip", pci_name(dev)); else { cfg_base = 0x3df0; - printk(KERN_INFO "TRM290: using default"); + printk(KERN_INFO "TRM290 %s: using default", pci_name(dev)); } printk(KERN_CONT " config base at 0x%04x\n", cfg_base); hwif->config_data = cfg_base; diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 5f07eeb736a..23332556e61 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -401,20 +401,19 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i */ via_config = via_config_find(&isa); if (!via_config->id) { - printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); + printk(KERN_WARNING "VP_IDE %s: unknown chipset, skipping\n", + pci_name(dev)); return -ENODEV; } /* * Print the boot message. */ - printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s " - "controller on pci%s\n", - via_config->name, isa->revision, + printk(KERN_INFO "VP_IDE %s: VIA %s (rev %02x) IDE %sDMA%s\n", + pci_name(dev), via_config->name, isa->revision, via_config->udma_mask ? "U" : "MW", via_dma[via_config->udma_mask ? - (fls(via_config->udma_mask) - 1) : 0], - pci_name(dev)); + (fls(via_config->udma_mask) - 1) : 0]); pci_dev_put(isa); @@ -454,7 +453,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); if (!vdev) { - printk(KERN_ERR "VP_IDE: out of memory :(\n"); + printk(KERN_ERR "VP_IDE %s: out of memory :(\n", pci_name(dev)); return -ENOMEM; } diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 20f0ee00469..d9655aeb013 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) { if ((progif & 0xa) != 0xa) { - printk(KERN_INFO "%s: device not capable of full " - "native PCI mode\n", name); + printk(KERN_INFO "%s %s: device not capable of full " + "native PCI mode\n", name, pci_name(dev)); return -EOPNOTSUPP; } - printk("%s: placing both ports into native PCI mode\n", name); + printk(KERN_INFO "%s %s: placing both ports into native PCI " + "mode\n", name, pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) { - printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted " - "0x%04x, got 0x%04x\n", - name, progif|5, progif); + printk(KERN_ERR "%s %s: rewrite of PROGIF failed, " + "wanted 0x%04x, got 0x%04x\n", + name, pci_name(dev), progif | 5, progif); return -EOPNOTSUPP; } } @@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI -static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) +static int ide_pci_clear_simplex(unsigned long dma_base, const char *name) { u8 dma_stat = inb(dma_base + 2); outb(dma_stat & 0x60, dma_base + 2); dma_stat = inb(dma_base + 2); - if (dma_stat & 0x80) - printk(KERN_INFO "%s: simplex device: DMA forced\n", name); + + return (dma_stat & 0x80) ? 1 : 0; } /** @@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) dma_base = pci_resource_start(dev, baridx); if (dma_base == 0) { - printk(KERN_ERR "%s: DMA base is invalid\n", d->name); + printk(KERN_ERR "%s %s: DMA base is invalid\n", + d->name, pci_name(dev)); return 0; } } @@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base); int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) { + struct pci_dev *dev = to_pci_dev(hwif->dev); u8 dma_stat; if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520)) goto out; if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { - ide_pci_clear_simplex(hwif->dma_base, d->name); + if (ide_pci_clear_simplex(hwif->dma_base, d->name)) + printk(KERN_INFO "%s %s: simplex device: DMA forced\n", + d->name, pci_name(dev)); goto out; } @@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) */ dma_stat = hwif->tp_ops->read_sff_dma_status(hwif); if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { - printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name); + printk(KERN_INFO "%s %s: simplex device: DMA disabled\n", + d->name, pci_name(dev)); return -1; } out: @@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *dev, const char *name) if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || (pcicmd & PCI_COMMAND_MASTER) == 0) { - printk(KERN_ERR "%s: error updating PCICMD on %s\n", - name, pci_name(dev)); + printk(KERN_ERR "%s %s: error updating PCICMD\n", + name, pci_name(dev)); return -EIO; } } @@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master); void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) { - printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at " - " PCI slot %s\n", d->name, dev->vendor, dev->device, - dev->revision, pci_name(dev)); + printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n", + d->name, pci_name(dev), + dev->vendor, dev->device, dev->revision); } EXPORT_SYMBOL_GPL(ide_setup_pci_noise); @@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) if (pci_enable_device(dev)) { ret = pci_enable_device_io(dev); if (ret < 0) { - printk(KERN_WARNING "%s: (ide_setup_pci_device:) " - "Could not enable device.\n", d->name); + printk(KERN_WARNING "%s %s: couldn't enable device\n", + d->name, pci_name(dev)); goto out; } - printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name); + printk(KERN_WARNING "%s %s: BIOS configuration fixed\n", + d->name, pci_name(dev)); } /* @@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) */ ret = pci_set_dma_mask(dev, DMA_32BIT_MASK); if (ret < 0) { - printk(KERN_ERR "%s: can't set dma mask\n", d->name); + printk(KERN_ERR "%s %s: can't set DMA mask\n", + d->name, pci_name(dev)); goto out; } @@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) ret = pci_request_selected_regions(dev, bars, d->name); if (ret < 0) - printk(KERN_ERR "%s: can't reserve resources\n", d->name); + printk(KERN_ERR "%s %s: can't reserve resources\n", + d->name, pci_name(dev)); out: return ret; } @@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) */ if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { - printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); + printk(KERN_INFO "%s %s: device disabled (BIOS)\n", + d->name, pci_name(dev)); return -ENODEV; } if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) { - printk(KERN_ERR "%s: error accessing PCI regs\n", d->name); + printk(KERN_ERR "%s %s: error accessing PCI regs\n", + d->name, pci_name(dev)); return -EIO; } if (!(pcicmd & PCI_COMMAND_IO)) { - printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name); + printk(KERN_ERR "%s %s: unable to enable IDE controller\n", + d->name, pci_name(dev)); return -ENXIO; } return 0; @@ -311,8 +323,9 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { if (ide_pci_check_iomem(dev, d, 2 * port) || ide_pci_check_iomem(dev, d, 2 * port + 1)) { - printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported " - "as MEM for port %d!\n", d->name, port); + printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are " + "reported as MEM for port %d!\n", + d->name, pci_name(dev), port); return -EINVAL; } @@ -325,8 +338,8 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, } if (!base || !ctl) { - printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", - d->name, port); + printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n", + d->name, pci_name(dev), port); return -EINVAL; } @@ -414,14 +427,16 @@ static int ide_setup_pci_controller(struct pci_dev *dev, ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if (ret < 0) { - printk(KERN_ERR "%s: error accessing PCI regs\n", d->name); + printk(KERN_ERR "%s %s: error accessing PCI regs\n", + d->name, pci_name(dev)); goto out; } if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */ ret = ide_pci_configure(dev, d); if (ret < 0) goto out; - printk(KERN_INFO "%s: device enabled (Linux)\n", d->name); + printk(KERN_INFO "%s %s: device enabled (Linux)\n", + d->name, pci_name(dev)); } out: @@ -460,7 +475,8 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || (tmp & e->mask) != e->val)) { - printk(KERN_INFO "%s: IDE port disabled\n", d->name); + printk(KERN_INFO "%s %s: IDE port disabled\n", + d->name, pci_name(dev)); continue; /* port not enabled */ } @@ -506,18 +522,15 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, /* Is it an "IDE storage" device in non-PCI mode? */ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) { if (noisy) - printk(KERN_INFO "%s: not 100%% native mode: " - "will probe irqs later\n", d->name); + printk(KERN_INFO "%s %s: not 100%% native mode: will " + "probe irqs later\n", d->name, pci_name(dev)); pciirq = ret; - } else if (!pciirq) { - if (noisy) - printk(KERN_WARNING "%s: bad irq (%d): will probe later\n", - d->name, pciirq); - pciirq = 0; - } else { - if (noisy) - printk(KERN_INFO "%s: 100%% native mode on irq %d\n", - d->name, pciirq); + } else if (!pciirq && noisy) { + printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n", + d->name, pci_name(dev), pciirq); + } else if (noisy) { + printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n", + d->name, pci_name(dev), pciirq); } ret = pciirq; -- cgit v1.2.3