From d6251d4488a361c93da2398818e1ec69cffb6073 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 6 Jan 2009 17:20:58 +0100 Subject: ide-cd: convert to ide-atapi facilities ... and remove no longer needed cdrom_start_packet_command and cdrom_transfer_packet_command. Tested lightly with ide-cd and ide-floppy. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-atapi.c | 5 ++- drivers/ide/ide-cd.c | 96 ++----------------------------------------------- 2 files changed, 6 insertions(+), 95 deletions(-) (limited to 'drivers/ide') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index d6a50d67b7d..e96c0126059 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -549,7 +549,10 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) } /* Set the interrupt routine */ - ide_set_handler(drive, ide_pc_intr, timeout, expiry); + ide_set_handler(drive, + (dev_is_idecd(drive) ? drive->irq_handler + : ide_pc_intr), + timeout, expiry); /* Begin DMA, if necessary */ if (dev_is_idecd(drive)) { diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 2cb301dccd2..cae69372cf4 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -510,99 +510,6 @@ end_request: return 1; } -static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *); -static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); - -/* - * Set up the device registers for transferring a packet command on DEV, - * expecting to later transfer XFERLEN bytes. HANDLER is the routine - * which actually transfers the command to the drive. If this is a - * drq_interrupt device, this routine will arrange for HANDLER to be - * called when the interrupt from the drive arrives. Otherwise, HANDLER - * will be called immediately after the drive is prepared for the transfer. - */ -static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - int xferlen; - - xferlen = ide_cd_get_xferlen(rq); - - ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen); - - /* FIXME: for Virtual DMA we must check harder */ - if (drive->dma) - drive->dma = !hwif->dma_ops->dma_setup(drive); - - /* set up the controller registers */ - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL, - xferlen, drive->dma); - - if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { - /* waiting for CDB interrupt, not DMA yet. */ - if (drive->dma) - drive->waiting_for_dma = 0; - - /* packet command */ - ide_execute_command(drive, ATA_CMD_PACKET, - cdrom_transfer_packet_command, - ATAPI_WAIT_PC, ide_cd_expiry); - return ide_started; - } else { - ide_execute_pkt_cmd(drive); - - return cdrom_transfer_packet_command(drive); - } -} - -/* - * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device - * registers must have already been prepared by cdrom_start_packet_command. - * HANDLER is the interrupt handler to call when the command completes or - * there's data ready. - */ -#define ATAPI_MIN_CDB_BYTES 12 -static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - struct request *rq = hwif->rq; - int cmd_len; - ide_startstop_t startstop; - - ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__); - - /* we must wait for DRQ to get set */ - if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { - printk(KERN_ERR "%s: timeout while waiting for DRQ to assert\n", - drive->name); - return startstop; - } - - if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { - /* ok, next interrupt will be DMA interrupt */ - if (drive->dma) - drive->waiting_for_dma = 1; - } - - /* arm the interrupt handler */ - ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry); - - /* ATAPI commands get padded out to 12 bytes minimum */ - cmd_len = COMMAND_SIZE(rq->cmd[0]); - if (cmd_len < ATAPI_MIN_CDB_BYTES) - cmd_len = ATAPI_MIN_CDB_BYTES; - - /* start the DMA if need be */ - if (drive->dma) - hwif->dma_ops->dma_start(drive); - - /* send the command to the device */ - hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); - - return ide_started; -} - /* * Check the contents of the interrupt reason register from the cdrom * and attempt to recover if there are problems. Returns 0 if everything's @@ -1174,7 +1081,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, return ide_stopped; } - return cdrom_start_packet_command(drive); + return ide_issue_pc(drive); } /* @@ -2072,6 +1979,7 @@ static int ide_cd_probe(ide_drive_t *drive) } drive->debug_mask = debug_mask; + drive->irq_handler = cdrom_newpc_intr; info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL); if (info == NULL) { -- cgit v1.2.3