From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/input/serio/i8042.c | 1116 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1116 insertions(+) create mode 100644 drivers/input/serio/i8042.c (limited to 'drivers/input/serio/i8042.c') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c new file mode 100644 index 00000000000..8e63e464d36 --- /dev/null +++ b/drivers/input/serio/i8042.c @@ -0,0 +1,1116 @@ +/* + * i8042 keyboard and mouse controller driver for Linux + * + * Copyright (c) 1999-2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +MODULE_AUTHOR("Vojtech Pavlik "); +MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver"); +MODULE_LICENSE("GPL"); + +static unsigned int i8042_noaux; +module_param_named(noaux, i8042_noaux, bool, 0); +MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); + +static unsigned int i8042_nomux; +module_param_named(nomux, i8042_nomux, bool, 0); +MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); + +static unsigned int i8042_unlock; +module_param_named(unlock, i8042_unlock, bool, 0); +MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); + +static unsigned int i8042_reset; +module_param_named(reset, i8042_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); + +static unsigned int i8042_direct; +module_param_named(direct, i8042_direct, bool, 0); +MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); + +static unsigned int i8042_dumbkbd; +module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); +MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); + +static unsigned int i8042_noloop; +module_param_named(noloop, i8042_noloop, bool, 0); +MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); + +static unsigned int i8042_blink_frequency = 500; +module_param_named(panicblink, i8042_blink_frequency, uint, 0600); +MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics"); + +#ifdef CONFIG_PNP +static int i8042_nopnp; +module_param_named(nopnp, i8042_nopnp, bool, 0); +MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); +#endif + +#define DEBUG +#ifdef DEBUG +static int i8042_debug; +module_param_named(debug, i8042_debug, bool, 0600); +MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); +#endif + +__obsolete_setup("i8042_noaux"); +__obsolete_setup("i8042_nomux"); +__obsolete_setup("i8042_unlock"); +__obsolete_setup("i8042_reset"); +__obsolete_setup("i8042_direct"); +__obsolete_setup("i8042_dumbkbd"); + +#include "i8042.h" + +static DEFINE_SPINLOCK(i8042_lock); + +struct i8042_port { + struct serio *serio; + int irq; + unsigned char disable; + unsigned char irqen; + unsigned char exists; + signed char mux; + char name[8]; +}; + +#define I8042_KBD_PORT_NO 0 +#define I8042_AUX_PORT_NO 1 +#define I8042_MUX_PORT_NO 2 +#define I8042_NUM_PORTS (I8042_NUM_MUX_PORTS + 2) +static struct i8042_port i8042_ports[I8042_NUM_PORTS] = { + { + .disable = I8042_CTR_KBDDIS, + .irqen = I8042_CTR_KBDINT, + .mux = -1, + .name = "KBD", + }, + { + .disable = I8042_CTR_AUXDIS, + .irqen = I8042_CTR_AUXINT, + .mux = -1, + .name = "AUX", + } +}; + +static unsigned char i8042_initial_ctr; +static unsigned char i8042_ctr; +static unsigned char i8042_mux_open; +static unsigned char i8042_mux_present; +static struct timer_list i8042_timer; +static struct platform_device *i8042_platform_device; + + +/* + * Shared IRQ's require a device pointer, but this driver doesn't support + * multiple devices + */ +#define i8042_request_irq_cookie (&i8042_timer) + +static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs); + +/* + * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to + * be ready for reading values from it / writing values to it. + * Called always with i8042_lock held. + */ + +static int i8042_wait_read(void) +{ + int i = 0; + while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) { + udelay(50); + i++; + } + return -(i == I8042_CTL_TIMEOUT); +} + +static int i8042_wait_write(void) +{ + int i = 0; + while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) { + udelay(50); + i++; + } + return -(i == I8042_CTL_TIMEOUT); +} + +/* + * i8042_flush() flushes all data that may be in the keyboard and mouse buffers + * of the i8042 down the toilet. + */ + +static int i8042_flush(void) +{ + unsigned long flags; + unsigned char data, str; + int i = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) { + udelay(50); + data = i8042_read_data(); + i++; + dbg("%02x <- i8042 (flush, %s)", data, + str & I8042_STR_AUXDATA ? "aux" : "kbd"); + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + return i; +} + +/* + * i8042_command() executes a command on the i8042. It also sends the input + * parameter(s) of the commands to it, and receives the output value(s). The + * parameters are to be stored in the param array, and the output is placed + * into the same array. The number of the parameters and output values is + * encoded in bits 8-11 of the command number. + */ + +static int i8042_command(unsigned char *param, int command) +{ + unsigned long flags; + int retval = 0, i = 0; + + if (i8042_noloop && command == I8042_CMD_AUX_LOOP) + return -1; + + spin_lock_irqsave(&i8042_lock, flags); + + retval = i8042_wait_write(); + if (!retval) { + dbg("%02x -> i8042 (command)", command & 0xff); + i8042_write_command(command & 0xff); + } + + if (!retval) + for (i = 0; i < ((command >> 12) & 0xf); i++) { + if ((retval = i8042_wait_write())) break; + dbg("%02x -> i8042 (parameter)", param[i]); + i8042_write_data(param[i]); + } + + if (!retval) + for (i = 0; i < ((command >> 8) & 0xf); i++) { + if ((retval = i8042_wait_read())) break; + if (i8042_read_status() & I8042_STR_AUXDATA) + param[i] = ~i8042_read_data(); + else + param[i] = i8042_read_data(); + dbg("%02x <- i8042 (return)", param[i]); + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + if (retval) + dbg(" -- i8042 (timeout)"); + + return retval; +} + +/* + * i8042_kbd_write() sends a byte out through the keyboard interface. + */ + +static int i8042_kbd_write(struct serio *port, unsigned char c) +{ + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + if(!(retval = i8042_wait_write())) { + dbg("%02x -> i8042 (kbd-data)", c); + i8042_write_data(c); + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + return retval; +} + +/* + * i8042_aux_write() sends a byte out through the aux interface. + */ + +static int i8042_aux_write(struct serio *serio, unsigned char c) +{ + struct i8042_port *port = serio->port_data; + int retval; + +/* + * Send the byte out. + */ + + if (port->mux == -1) + retval = i8042_command(&c, I8042_CMD_AUX_SEND); + else + retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux); + +/* + * Make sure the interrupt happens and the character is received even + * in the case the IRQ isn't wired, so that we can receive further + * characters later. + */ + + i8042_interrupt(0, NULL, NULL); + return retval; +} + +/* + * i8042_activate_port() enables port on a chip. + */ + +static int i8042_activate_port(struct i8042_port *port) +{ + if (!port->serio) + return -1; + + i8042_flush(); + + /* + * Enable port again here because it is disabled if we are + * resuming (normally it is enabled already). + */ + i8042_ctr &= ~port->disable; + + i8042_ctr |= port->irqen; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~port->irqen; + return -1; + } + + return 0; +} + + +/* + * i8042_open() is called when a port is open by the higher layer. + * It allocates the interrupt and calls i8042_enable_port. + */ + +static int i8042_open(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + if (port->mux != -1) + if (i8042_mux_open++) + return 0; + + if (request_irq(port->irq, i8042_interrupt, + SA_SHIRQ, "i8042", i8042_request_irq_cookie)) { + printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", port->irq, port->name); + goto irq_fail; + } + + if (i8042_activate_port(port)) { + printk(KERN_ERR "i8042.c: Can't activate %s, unregistering the port\n", port->name); + goto activate_fail; + } + + i8042_interrupt(0, NULL, NULL); + + return 0; + +activate_fail: + free_irq(port->irq, i8042_request_irq_cookie); + +irq_fail: + serio_unregister_port_delayed(serio); + + return -1; +} + +/* + * i8042_close() frees the interrupt, so that it can possibly be used + * by another driver. We never know - if the user doesn't have a mouse, + * the BIOS could have used the AUX interrupt for PCI. + */ + +static void i8042_close(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + if (port->mux != -1) + if (--i8042_mux_open) + return; + + i8042_ctr &= ~port->irqen; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_WARNING "i8042.c: Can't write CTR while closing %s.\n", port->name); +/* + * We still want to continue and free IRQ so if more data keeps coming in + * kernel will just ignore the irq. + */ + } + + free_irq(port->irq, i8042_request_irq_cookie); + + i8042_flush(); +} + +/* + * i8042_start() is called by serio core when port is about to finish + * registering. It will mark port as existing so i8042_interrupt can + * start sending data through it. + */ +static int i8042_start(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + port->exists = 1; + mb(); + return 0; +} + +/* + * i8042_stop() marks serio port as non-existing so i8042_interrupt + * will not try to send data to the port that is about to go away. + * The function is called by serio core as part of unregister procedure. + */ +static void i8042_stop(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + port->exists = 0; + synchronize_kernel(); + port->serio = NULL; +} + +/* + * i8042_interrupt() is the most important function in this driver - + * it handles the interrupts from the i8042, and sends incoming bytes + * to the upper layers. + */ + +static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct i8042_port *port; + unsigned long flags; + unsigned char str, data; + unsigned int dfl; + unsigned int port_no; + int ret; + + mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD); + + spin_lock_irqsave(&i8042_lock, flags); + str = i8042_read_status(); + if (unlikely(~str & I8042_STR_OBF)) { + spin_unlock_irqrestore(&i8042_lock, flags); + if (irq) dbg("Interrupt %d, without any data", irq); + ret = 0; + goto out; + } + data = i8042_read_data(); + spin_unlock_irqrestore(&i8042_lock, flags); + + if (i8042_mux_present && (str & I8042_STR_AUXDATA)) { + static unsigned long last_transmit; + static unsigned char last_str; + + dfl = 0; + if (str & I8042_STR_MUXERR) { + dbg("MUX error, status is %02x, data is %02x", str, data); + switch (data) { + default: +/* + * When MUXERR condition is signalled the data register can only contain + * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately + * it is not always the case. Some KBC just get confused which port the + * data came from and signal error leaving the data intact. They _do not_ + * revert to legacy mode (actually I've never seen KBC reverting to legacy + * mode yet, when we see one we'll add proper handling). + * Anyway, we will assume that the data came from the same serio last byte + * was transmitted (if transmission happened not too long ago). + */ + if (time_before(jiffies, last_transmit + HZ/10)) { + str = last_str; + break; + } + /* fall through - report timeout */ + case 0xfd: + case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break; + case 0xff: dfl = SERIO_PARITY; data = 0xfe; break; + } + } + + port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3); + last_str = str; + last_transmit = jiffies; + } else { + + dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) | + ((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0); + + port_no = (str & I8042_STR_AUXDATA) ? + I8042_AUX_PORT_NO : I8042_KBD_PORT_NO; + } + + port = &i8042_ports[port_no]; + + dbg("%02x <- i8042 (interrupt, %s, %d%s%s)", + data, port->name, irq, + dfl & SERIO_PARITY ? ", bad parity" : "", + dfl & SERIO_TIMEOUT ? ", timeout" : ""); + + if (likely(port->exists)) + serio_interrupt(port->serio, data, dfl, regs); + + ret = 1; +out: + return IRQ_RETVAL(ret); +} + +/* + * i8042_set_mux_mode checks whether the controller has an active + * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode. + */ + +static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version) +{ + + unsigned char param; +/* + * Get rid of bytes in the queue. + */ + + i8042_flush(); + +/* + * Internal loopback test - send three bytes, they should come back from the + * mouse interface, the last should be version. Note that we negate mouseport + * command responses for the i8042_check_aux() routine. + */ + + param = 0xf0; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != 0x0f) + return -1; + param = mode ? 0x56 : 0xf6; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != (mode ? 0xa9 : 0x09)) + return -1; + param = mode ? 0xa4 : 0xa5; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b : 0x5a)) + return -1; + + if (mux_version) + *mux_version = ~param; + + return 0; +} + + +/* + * i8042_enable_mux_ports enables 4 individual AUX ports after + * the controller has been switched into Multiplexed mode + */ + +static int i8042_enable_mux_ports(void) +{ + unsigned char param; + int i; +/* + * Disable all muxed ports by disabling AUX. + */ + + i8042_ctr |= I8042_CTR_AUXDIS; + i8042_ctr &= ~I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n"); + return -1; + } + +/* + * Enable all muxed ports. + */ + + for (i = 0; i < 4; i++) { + i8042_command(¶m, I8042_CMD_MUX_PFX + i); + i8042_command(¶m, I8042_CMD_AUX_ENABLE); + } + + return 0; +} + + +/* + * i8042_check_mux() checks whether the controller supports the PS/2 Active + * Multiplexing specification by Synaptics, Phoenix, Insyde and + * LCS/Telegraphics. + */ + +static int __init i8042_check_mux(void) +{ + unsigned char mux_version; + + if (i8042_set_mux_mode(1, &mux_version)) + return -1; + + /* Workaround for interference with USB Legacy emulation */ + /* that causes a v10.12 MUX to be found. */ + if (mux_version == 0xAC) + return -1; + + printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n", + (mux_version >> 4) & 0xf, mux_version & 0xf); + + if (i8042_enable_mux_ports()) + return -1; + + i8042_mux_present = 1; + return 0; +} + + +/* + * i8042_check_aux() applies as much paranoia as it can at detecting + * the presence of an AUX interface. + */ + +static int __init i8042_check_aux(void) +{ + unsigned char param; + static int i8042_check_aux_cookie; + +/* + * Check if AUX irq is available. If it isn't, then there is no point + * in trying to detect AUX presence. + */ + + if (request_irq(i8042_ports[I8042_AUX_PORT_NO].irq, i8042_interrupt, + SA_SHIRQ, "i8042", &i8042_check_aux_cookie)) + return -1; + free_irq(i8042_ports[I8042_AUX_PORT_NO].irq, &i8042_check_aux_cookie); + +/* + * Get rid of bytes in the queue. + */ + + i8042_flush(); + +/* + * Internal loopback test - filters out AT-type i8042's. Unfortunately + * SiS screwed up and their 5597 doesn't support the LOOP command even + * though it has an AUX port. + */ + + param = 0x5a; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != 0xa5) { + +/* + * External connection test - filters out AT-soldered PS/2 i8042's + * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error + * 0xfa - no error on some notebooks which ignore the spec + * Because it's common for chipsets to return error on perfectly functioning + * AUX ports, we test for this only when the LOOP command failed. + */ + + if (i8042_command(¶m, I8042_CMD_AUX_TEST) + || (param && param != 0xfa && param != 0xff)) + return -1; + } + +/* + * Bit assignment test - filters out PS/2 i8042's in AT mode + */ + + if (i8042_command(¶m, I8042_CMD_AUX_DISABLE)) + return -1; + if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) { + printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); + printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); + } + + if (i8042_command(¶m, I8042_CMD_AUX_ENABLE)) + return -1; + if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS)) + return -1; + +/* + * Disable the interface. + */ + + i8042_ctr |= I8042_CTR_AUXDIS; + i8042_ctr &= ~I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + return -1; + + return 0; +} + + +/* + * i8042_port_register() marks the device as existing, + * registers it, and reports to the user. + */ + +static int __init i8042_port_register(struct i8042_port *port) +{ + i8042_ctr &= ~port->disable; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n"); + kfree(port->serio); + port->serio = NULL; + i8042_ctr |= port->disable; + return -1; + } + + printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n", + port->name, + (unsigned long) I8042_DATA_REG, + (unsigned long) I8042_COMMAND_REG, + port->irq); + + serio_register_port(port->serio); + + return 0; +} + + +static void i8042_timer_func(unsigned long data) +{ + i8042_interrupt(0, NULL, NULL); +} + + +/* + * i8042_controller init initializes the i8042 controller, and, + * most importantly, sets it into non-xlated mode if that's + * desired. + */ + +static int i8042_controller_init(void) +{ + unsigned long flags; + +/* + * Test the i8042. We need to know if it thinks it's working correctly + * before doing anything else. + */ + + if (i8042_flush() == I8042_BUFFER_SIZE) { + printk(KERN_ERR "i8042.c: No controller found.\n"); + return -1; + } + + if (i8042_reset) { + + unsigned char param; + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -1; + } + + if (param != I8042_RET_CTL_TEST) { + printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", + param, I8042_RET_CTL_TEST); + return -1; + } + } + +/* + * Save the CTR for restoral on unload / reboot. + */ + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n"); + return -1; + } + + i8042_initial_ctr = i8042_ctr; + +/* + * Disable the keyboard interface and interrupt. + */ + + i8042_ctr |= I8042_CTR_KBDDIS; + i8042_ctr &= ~I8042_CTR_KBDINT; + +/* + * Handle keylock. + */ + + spin_lock_irqsave(&i8042_lock, flags); + if (~i8042_read_status() & I8042_STR_KEYLOCK) { + if (i8042_unlock) + i8042_ctr |= I8042_CTR_IGNKEYLOCK; + else + printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n"); + } + spin_unlock_irqrestore(&i8042_lock, flags); + +/* + * If the chip is configured into nontranslated mode by the BIOS, don't + * bother enabling translating and be happy. + */ + + if (~i8042_ctr & I8042_CTR_XLATE) + i8042_direct = 1; + +/* + * Set nontranslated mode for the kbd interface if requested by an option. + * After this the kbd interface becomes a simple serial in/out, like the aux + * interface is. We don't do this by default, since it can confuse notebook + * BIOSes. + */ + + if (i8042_direct) + i8042_ctr &= ~I8042_CTR_XLATE; + +/* + * Write CTR back. + */ + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n"); + return -1; + } + + return 0; +} + + +/* + * Reset the controller. + */ +static void i8042_controller_reset(void) +{ + unsigned char param; + +/* + * Reset the controller if requested. + */ + + if (i8042_reset) + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) + printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); + +/* + * Disable MUX mode if present. + */ + + if (i8042_mux_present) + i8042_set_mux_mode(0, NULL); + +/* + * Restore the original control register setting. + */ + + i8042_ctr = i8042_initial_ctr; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING "i8042.c: Can't restore CTR.\n"); +} + + +/* + * Here we try to reset everything back to a state in which the BIOS will be + * able to talk to the hardware when rebooting. + */ + +static void i8042_controller_cleanup(void) +{ + int i; + + i8042_flush(); + +/* + * Reset anything that is connected to the ports. + */ + + for (i = 0; i < I8042_NUM_PORTS; i++) + if (i8042_ports[i].exists) + serio_cleanup(i8042_ports[i].serio); + + i8042_controller_reset(); +} + + +/* + * i8042_panic_blink() will flash the keyboard LEDs and is called when + * kernel panics. Flashing LEDs is useful for users running X who may + * not see the console and will help distingushing panics from "real" + * lockups. + * + * Note that DELAY has a limit of 10ms so we will not get stuck here + * waiting for KBC to free up even if KBD interrupt is off + */ + +#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0) + +static long i8042_panic_blink(long count) +{ + long delay = 0; + static long last_blink; + static char led; + + /* + * We expect frequency to be about 1/2s. KDB uses about 1s. + * Make sure they are different. + */ + if (!i8042_blink_frequency) + return 0; + if (count - last_blink < i8042_blink_frequency) + return 0; + + led ^= 0x01 | 0x04; + while (i8042_read_status() & I8042_STR_IBF) + DELAY; + i8042_write_data(0xed); /* set leds */ + DELAY; + while (i8042_read_status() & I8042_STR_IBF) + DELAY; + DELAY; + i8042_write_data(led); + DELAY; + last_blink = count; + return delay; +} + +#undef DELAY + +/* + * Here we try to restore the original BIOS settings + */ + +static int i8042_suspend(struct device *dev, pm_message_t state, u32 level) +{ + if (level == SUSPEND_DISABLE) { + del_timer_sync(&i8042_timer); + i8042_controller_reset(); + } + + return 0; +} + + +/* + * Here we try to reset everything back to a state in which suspended + */ + +static int i8042_resume(struct device *dev, u32 level) +{ + int i; + + if (level != RESUME_ENABLE) + return 0; + + if (i8042_controller_init()) { + printk(KERN_ERR "i8042: resume failed\n"); + return -1; + } + + if (i8042_mux_present) + if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) + printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n"); + +/* + * Activate all ports. + */ + + for (i = 0; i < I8042_NUM_PORTS; i++) + i8042_activate_port(&i8042_ports[i]); + +/* + * Restart timer (for polling "stuck" data) + */ + mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD); + + panic_blink = i8042_panic_blink; + + return 0; + +} + +/* + * We need to reset the 8042 back to original mode on system shutdown, + * because otherwise BIOSes will be confused. + */ + +static void i8042_shutdown(struct device *dev) +{ + i8042_controller_cleanup(); +} + +static struct device_driver i8042_driver = { + .name = "i8042", + .bus = &platform_bus_type, + .suspend = i8042_suspend, + .resume = i8042_resume, + .shutdown = i8042_shutdown, +}; + +static void __init i8042_create_kbd_port(void) +{ + struct serio *serio; + struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO]; + + serio = kmalloc(sizeof(struct serio), GFP_KERNEL); + if (serio) { + memset(serio, 0, sizeof(struct serio)); + serio->id.type = i8042_direct ? SERIO_8042 : SERIO_8042_XL; + serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write; + serio->open = i8042_open; + serio->close = i8042_close; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + strlcpy(serio->name, "i8042 Kbd Port", sizeof(serio->name)); + strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys)); + + port->serio = serio; + i8042_port_register(port); + } +} + +static void __init i8042_create_aux_port(void) +{ + struct serio *serio; + struct i8042_port *port = &i8042_ports[I8042_AUX_PORT_NO]; + + serio = kmalloc(sizeof(struct serio), GFP_KERNEL); + if (serio) { + memset(serio, 0, sizeof(struct serio)); + serio->id.type = SERIO_8042; + serio->write = i8042_aux_write; + serio->open = i8042_open; + serio->close = i8042_close; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + strlcpy(serio->name, "i8042 Aux Port", sizeof(serio->name)); + strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); + + port->serio = serio; + i8042_port_register(port); + } +} + +static void __init i8042_create_mux_port(int index) +{ + struct serio *serio; + struct i8042_port *port = &i8042_ports[I8042_MUX_PORT_NO + index]; + + serio = kmalloc(sizeof(struct serio), GFP_KERNEL); + if (serio) { + memset(serio, 0, sizeof(struct serio)); + serio->id.type = SERIO_8042; + serio->write = i8042_aux_write; + serio->open = i8042_open; + serio->close = i8042_close; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + snprintf(serio->name, sizeof(serio->name), "i8042 Aux-%d Port", index); + snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, index + 1); + + *port = i8042_ports[I8042_AUX_PORT_NO]; + port->exists = 0; + snprintf(port->name, sizeof(port->name), "AUX%d", index); + port->mux = index; + port->serio = serio; + i8042_port_register(port); + } +} + +static int __init i8042_init(void) +{ + int i; + int err; + + dbg_init(); + + init_timer(&i8042_timer); + i8042_timer.function = i8042_timer_func; + + if (i8042_platform_init()) + return -EBUSY; + + i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ; + i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ; + + if (i8042_controller_init()) { + i8042_platform_exit(); + return -ENODEV; + } + + err = driver_register(&i8042_driver); + if (err) { + i8042_platform_exit(); + return err; + } + + i8042_platform_device = platform_device_register_simple("i8042", -1, NULL, 0); + if (IS_ERR(i8042_platform_device)) { + driver_unregister(&i8042_driver); + i8042_platform_exit(); + return PTR_ERR(i8042_platform_device); + } + + if (!i8042_noaux && !i8042_check_aux()) { + if (!i8042_nomux && !i8042_check_mux()) + for (i = 0; i < I8042_NUM_MUX_PORTS; i++) + i8042_create_mux_port(i); + else + i8042_create_aux_port(); + } + + i8042_create_kbd_port(); + + mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD); + + return 0; +} + +static void __exit i8042_exit(void) +{ + int i; + + i8042_controller_cleanup(); + + for (i = 0; i < I8042_NUM_PORTS; i++) + if (i8042_ports[i].exists) + serio_unregister_port(i8042_ports[i].serio); + + del_timer_sync(&i8042_timer); + + platform_device_unregister(i8042_platform_device); + driver_unregister(&i8042_driver); + + i8042_platform_exit(); + + panic_blink = NULL; +} + +module_init(i8042_init); +module_exit(i8042_exit); -- cgit v1.2.3