From c746b5519a88b8803d43946ad06326ece4829116 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 5 Sep 2009 14:09:21 +0100 Subject: leds: Add WM831x status LED driver The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 7 + drivers/leds/Makefile | 1 + drivers/leds/leds-wm831x-status.c | 341 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 349 insertions(+) create mode 100644 drivers/leds/leds-wm831x-status.c (limited to 'drivers/leds') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 7c8e7122aaa..edfd4e302be 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -195,6 +195,13 @@ config LEDS_PCA955X LED driver chips accessed via the I2C bus. Supported devices include PCA9550, PCA9551, PCA9552, and PCA9553. +config LEDS_WM831X_STATUS + tristate "LED support for status LEDs on WM831x PMICs" + depends on LEDS_CLASS && MFD_WM831X + help + This option enables support for the status LEDs of the WM831x + series of PMICs. + config LEDS_WM8350 tristate "LED Support for WM8350 AudioPlus PMIC" depends on LEDS_CLASS && MFD_WM8350 diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index e8cdcf77a4c..46d72704d60 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o +obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c new file mode 100644 index 00000000000..c586d05e336 --- /dev/null +++ b/drivers/leds/leds-wm831x-status.c @@ -0,0 +1,341 @@ +/* + * LED driver for WM831x status LEDs + * + * Copyright(C) 2009 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +struct wm831x_status { + struct led_classdev cdev; + struct wm831x *wm831x; + struct work_struct work; + struct mutex mutex; + + spinlock_t value_lock; + int reg; /* Control register */ + int reg_val; /* Control register value */ + + int blink; + int blink_time; + int blink_cyc; + int src; + enum led_brightness brightness; +}; + +#define to_wm831x_status(led_cdev) \ + container_of(led_cdev, struct wm831x_status, cdev) + +static void wm831x_status_work(struct work_struct *work) +{ + struct wm831x_status *led = container_of(work, struct wm831x_status, + work); + unsigned long flags; + + mutex_lock(&led->mutex); + + led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK | + WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK); + + spin_lock_irqsave(&led->value_lock, flags); + + led->reg_val |= led->src << WM831X_LED_SRC_SHIFT; + if (led->blink) { + led->reg_val |= 2 << WM831X_LED_MODE_SHIFT; + led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT; + led->reg_val |= led->blink_cyc; + } else { + if (led->brightness != LED_OFF) + led->reg_val |= 1 << WM831X_LED_MODE_SHIFT; + } + + spin_unlock_irqrestore(&led->value_lock, flags); + + wm831x_reg_write(led->wm831x, led->reg, led->reg_val); + + mutex_unlock(&led->mutex); +} + +static void wm831x_status_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct wm831x_status *led = to_wm831x_status(led_cdev); + unsigned long flags; + + spin_lock_irqsave(&led->value_lock, flags); + led->brightness = value; + if (value == LED_OFF) + led->blink = 0; + schedule_work(&led->work); + spin_unlock_irqrestore(&led->value_lock, flags); +} + +static int wm831x_status_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct wm831x_status *led = to_wm831x_status(led_cdev); + unsigned long flags; + int ret = 0; + + /* Pick some defaults if we've not been given times */ + if (*delay_on == 0 && *delay_off == 0) { + *delay_on = 250; + *delay_off = 250; + } + + spin_lock_irqsave(&led->value_lock, flags); + + /* We only have a limited selection of settings, see if we can + * support the configuration we're being given */ + switch (*delay_on) { + case 1000: + led->blink_time = 0; + break; + case 250: + led->blink_time = 1; + break; + case 125: + led->blink_time = 2; + break; + case 62: + case 63: + /* Actually 62.5ms */ + led->blink_time = 3; + break; + default: + ret = -EINVAL; + break; + } + + if (ret == 0) { + switch (*delay_off / *delay_on) { + case 1: + led->blink_cyc = 0; + break; + case 3: + led->blink_cyc = 1; + break; + case 4: + led->blink_cyc = 2; + break; + case 8: + led->blink_cyc = 3; + break; + default: + ret = -EINVAL; + break; + } + } + + if (ret == 0) + led->blink = 1; + else + led->blink = 0; + + /* Always update; if we fail turn off blinking since we expect + * a software fallback. */ + schedule_work(&led->work); + + spin_unlock_irqrestore(&led->value_lock, flags); + + return ret; +} + +static const char *led_src_texts[] = { + "otp", + "power", + "charger", + "soft", +}; + +static ssize_t wm831x_status_src_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct wm831x_status *led = to_wm831x_status(led_cdev); + int i; + ssize_t ret = 0; + + mutex_lock(&led->mutex); + + for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) + if (i == led->src) + ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]); + else + ret += sprintf(&buf[ret], "%s ", led_src_texts[i]); + + mutex_unlock(&led->mutex); + + ret += sprintf(&buf[ret], "\n"); + + return ret; +} + +static ssize_t wm831x_status_src_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct wm831x_status *led = to_wm831x_status(led_cdev); + char name[20]; + int i; + size_t len; + + name[sizeof(name) - 1] = '\0'; + strncpy(name, buf, sizeof(name) - 1); + len = strlen(name); + + if (len && name[len - 1] == '\n') + name[len - 1] = '\0'; + + for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) { + if (!strcmp(name, led_src_texts[i])) { + mutex_lock(&led->mutex); + + led->src = i; + schedule_work(&led->work); + + mutex_unlock(&led->mutex); + } + } + + return size; +} + +static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store); + +static int wm831x_status_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *chip_pdata; + struct wm831x_status_pdata pdata; + struct wm831x_status *drvdata; + struct resource *res; + int id = pdev->id % ARRAY_SIZE(chip_pdata->status); + int ret; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No I/O resource\n"); + ret = -EINVAL; + goto err; + } + + drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + dev_set_drvdata(&pdev->dev, drvdata); + + drvdata->wm831x = wm831x; + drvdata->reg = res->start; + + if (wm831x->dev->platform_data) + chip_pdata = wm831x->dev->platform_data; + else + chip_pdata = NULL; + + memset(&pdata, 0, sizeof(pdata)); + if (chip_pdata && chip_pdata->status[id]) + memcpy(&pdata, chip_pdata->status[id], sizeof(pdata)); + else + pdata.name = dev_name(&pdev->dev); + + mutex_init(&drvdata->mutex); + INIT_WORK(&drvdata->work, wm831x_status_work); + spin_lock_init(&drvdata->value_lock); + + /* We cache the configuration register and read startup values + * from it. */ + drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg); + + if (drvdata->reg_val & WM831X_LED_MODE_MASK) + drvdata->brightness = LED_FULL; + else + drvdata->brightness = LED_OFF; + + /* Set a default source if configured, otherwise leave the + * current hardware setting. + */ + if (pdata.default_src == WM831X_STATUS_PRESERVE) { + drvdata->src = drvdata->reg_val; + drvdata->src &= WM831X_LED_SRC_MASK; + drvdata->src >>= WM831X_LED_SRC_SHIFT; + } else { + drvdata->src = pdata.default_src - 1; + } + + drvdata->cdev.name = pdata.name; + drvdata->cdev.default_trigger = pdata.default_trigger; + drvdata->cdev.brightness_set = wm831x_status_set; + drvdata->cdev.blink_set = wm831x_status_blink_set; + + ret = led_classdev_register(wm831x->dev, &drvdata->cdev); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register LED: %d\n", ret); + goto err_led; + } + + ret = device_create_file(drvdata->cdev.dev, &dev_attr_src); + if (ret != 0) + dev_err(&pdev->dev, + "No source control for LED: %d\n", ret); + + return 0; + +err_led: + led_classdev_unregister(&drvdata->cdev); + kfree(drvdata); +err: + return ret; +} + +static int wm831x_status_remove(struct platform_device *pdev) +{ + struct wm831x_status *drvdata = platform_get_drvdata(pdev); + + device_remove_file(drvdata->cdev.dev, &dev_attr_src); + led_classdev_unregister(&drvdata->cdev); + kfree(drvdata); + + return 0; +} + +static struct platform_driver wm831x_status_driver = { + .driver = { + .name = "wm831x-status", + .owner = THIS_MODULE, + }, + .probe = wm831x_status_probe, + .remove = wm831x_status_remove, +}; + +static int __devinit wm831x_status_init(void) +{ + return platform_driver_register(&wm831x_status_driver); +} +module_init(wm831x_status_init); + +static void wm831x_status_exit(void) +{ + platform_driver_unregister(&wm831x_status_driver); +} +module_exit(wm831x_status_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("WM831x status LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-status"); -- cgit v1.2.3 From 2fea09222ab48517d729a7fb4542092cf428f528 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 6 Aug 2009 16:04:51 -0700 Subject: leds: gpio-leds: fix typographics fault [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Simek Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/leds-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/leds') diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 6b06638eb5b..7467980b8cf 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -80,7 +80,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { - printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", + printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n", template->gpio, template->name); return 0; } -- cgit v1.2.3 From 74cbe20294c9f54a0926d19235395cf8e22b7830 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 6 Aug 2009 16:04:51 -0700 Subject: leds: fix coding style in worker thread code for ledtrig-gpio. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Samuel R. C. Vale Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/leds/ledtrig-gpio.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers/leds') diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c index 1bc5db4ece0..f5913372d69 100644 --- a/drivers/leds/ledtrig-gpio.c +++ b/drivers/leds/ledtrig-gpio.c @@ -44,22 +44,22 @@ static void gpio_trig_work(struct work_struct *work) struct gpio_trig_data, work); int tmp; - if (!gpio_data->gpio) - return; - - tmp = gpio_get_value(gpio_data->gpio); - if (gpio_data->inverted) - tmp = !tmp; - - if (tmp) { - if (gpio_data->desired_brightness) - led_set_brightness(gpio_data->led, - gpio_data->desired_brightness); - else - led_set_brightness(gpio_data->led, LED_FULL); - } else { - led_set_brightness(gpio_data->led, LED_OFF); - } + if (!gpio_data->gpio) + return; + + tmp = gpio_get_value(gpio_data->gpio); + if (gpio_data->inverted) + tmp = !tmp; + + if (tmp) { + if (gpio_data->desired_brightness) + led_set_brightness(gpio_data->led, + gpio_data->desired_brightness); + else + led_set_brightness(gpio_data->led, LED_FULL); + } else { + led_set_brightness(gpio_data->led, LED_OFF); + } } static ssize_t gpio_trig_brightness_show(struct device *dev, -- cgit v1.2.3 From 85c5204a677bc1053cb636590859c32fd0cf6bf9 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 7 Sep 2009 14:35:04 +0100 Subject: leds: Fix leds-pca9532 whitespace issues Signed-off-by: Richard Purdie 1690 || *delay_on < 6) @@ -227,7 +227,7 @@ static int pca9532_configure(struct i2c_client *client, break; case PCA9532_TYPE_LED: led->state = pled->state; - led->name = pled->name; + led->name = pled->name; led->ldev.name = led->name; led->ldev.brightness = LED_OFF; led->ldev.brightness_set = pca9532_set_brightness; @@ -254,7 +254,7 @@ static int pca9532_configure(struct i2c_client *client, data->idev->name = pled->name; data->idev->phys = "i2c/pca9532"; data->idev->id.bustype = BUS_HOST; - data->idev->id.vendor = 0x001f; + data->idev->id.vendor = 0x001f; data->idev->id.product = 0x0001; data->idev->id.version = 0x0100; data->idev->evbit[0] = BIT_MASK(EV_SND); -- cgit v1.2.3 From db3f520738a8c5bf593e13d4ac71f8da9ffcb964 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Mon, 7 Sep 2009 14:37:27 +0100 Subject: leds: Fix LED names This is needed to get kde-powersave to work properly on some g4 powerbooks. From: Olaf Hering Signed-off-by: Greg Kroah-Hartman Signed-off-by: Richard Purdie --- drivers/leds/leds-cobalt-qube.c | 2 +- drivers/leds/leds-cobalt-raq.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/leds') diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 059aa2924b1..8816806accd 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -28,7 +28,7 @@ static void qube_front_led_set(struct led_classdev *led_cdev, } static struct led_classdev qube_front_led = { - .name = "qube-front", + .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, .default_trigger = "ide-disk", diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index 5f1ce810815..defc212105f 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -49,7 +49,7 @@ static void raq_web_led_set(struct led_classdev *led_cdev, } static struct led_classdev raq_web_led = { - .name = "raq-web", + .name = "raq::web", .brightness_set = raq_web_led_set, }; @@ -70,7 +70,7 @@ static void raq_power_off_led_set(struct led_classdev *led_cdev, } static struct led_classdev raq_power_off_led = { - .name = "raq-power-off", + .name = "raq::power-off", .brightness_set = raq_power_off_led_set, .default_trigger = "power-off", }; -- cgit v1.2.3 From 7f1be819cccea65dcd2a8c86de6369946b91c224 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Fri, 3 Jul 2009 16:18:45 +0200 Subject: leds: Fix indentation in LEDS_LP3944 Kconfig entry Signed-off-by: Antonio Ospite Signed-off-by: Richard Purdie --- drivers/leds/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/leds') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index edfd4e302be..e4f599f20e3 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -150,9 +150,9 @@ config LEDS_LP3944 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" depends on LEDS_CLASS && I2C help - This option enables support for LEDs connected to the National - Semiconductor LP3944 Lighting Management Unit (LMU) also known as - Fun Light Chip. + This option enables support for LEDs connected to the National + Semiconductor LP3944 Lighting Management Unit (LMU) also known as + Fun Light Chip. To compile this driver as a module, choose M here: the module will be called leds-lp3944. -- cgit v1.2.3 From f16a5dba01ed942f427f56b0d1128251721275a5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 11 Jul 2009 22:52:34 +0200 Subject: leds: move leds-clevo-mail's probe function to .devinit.text MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A pointer to clevo_mail_led_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Signed-off-by: Uwe Kleine-König Signed-off-by: Richard Purdie --- drivers/leds/leds-clevo-mail.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/leds') diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index 1813c84ea5f..8ee83ceb4a7 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -145,7 +145,7 @@ static struct led_classdev clevo_mail_led = { .flags = LED_CORE_SUSPENDRESUME, }; -static int __init clevo_mail_led_probe(struct platform_device *pdev) +static int __devinit clevo_mail_led_probe(struct platform_device *pdev) { return led_classdev_register(&pdev->dev, &clevo_mail_led); } -- cgit v1.2.3