From a51e34dd6080d8d5c9e95a4e0292cd4cb889a61b Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Sat, 17 May 2008 23:05:48 -0300
Subject: V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiver

- driver for Anysee DVB-T/C receiver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/Kconfig       |   9 +
 drivers/media/dvb/dvb-usb/Makefile      |   3 +
 drivers/media/dvb/dvb-usb/anysee.c      | 555 ++++++++++++++++++++++++++++++++
 drivers/media/dvb/dvb-usb/anysee.h      | 304 +++++++++++++++++
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h |   2 +
 5 files changed, 873 insertions(+)
 create mode 100644 drivers/media/dvb/dvb-usb/anysee.c
 create mode 100644 drivers/media/dvb/dvb-usb/anysee.h

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index f00a0eb4042..3f7b9b6326b 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -241,3 +241,12 @@ config DVB_USB_AF9005_REMOTE
 	  Say Y here to support the default remote control decoding for the
 	  Afatech AF9005 based receiver.
 
+config DVB_USB_ANYSEE
+	tristate "Anysee DVB-T/C USB2.0 support"
+	depends on DVB_USB
+	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the Anysee E30, Anysee E30 Plus or
+	  Anysee E30 C Plus DVB USB2.0 receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index c6511a6c0ab..44c11e45e56 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o
 dvb-usb-af9005-remote-objs = af9005-remote.o
 obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
 
+dvb-usb-anysee-objs = anysee.o
+obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
new file mode 100644
index 00000000000..dada92a14cf
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -0,0 +1,555 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+
+/* debug */
+static int dvb_usb_anysee_debug;
+module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct mutex anysee_usb_mutex;
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
+	u8 *rbuf, u8 rlen)
+{
+	struct anysee_state *state = d->priv;
+	int act_len, ret;
+	u8 buf[64];
+
+	if (slen > sizeof(buf))
+		slen = sizeof(buf);
+	memcpy(&buf[0], sbuf, slen);
+	buf[60] = state->seq++;
+
+	if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
+		return -EAGAIN;
+
+	/* We need receive one message more after dvb_usb_generic_rw due
+	   to weird transaction flow, which is 1 x send + 2 x receive. */
+	ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
+
+	if (!ret) {
+		/* receive 2nd answer */
+		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+			d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
+			&act_len, 2000);
+		if (ret)
+			err("%s: recv bulk message failed: %d", __func__, ret);
+		else {
+			deb_xfer("<<< ");
+			debug_dump(buf, act_len, deb_xfer);
+		}
+	}
+
+	/* read request, copy returned data to return buf */
+	if (!ret && rbuf && rlen)
+		memcpy(rbuf, buf, rlen);
+
+	mutex_unlock(&anysee_usb_mutex);
+
+	return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+	int ret;
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
+	return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+	u8 buf[] = {CMD_GET_HW_INFO};
+	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+	deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+	int ret;
+	/* LED light */
+	ret = anysee_led_ctrl(d, 0x01, 0x03);
+	if (ret)
+		return ret;
+
+	/* enable IR */
+	ret = anysee_ir_ctrl(d, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret, inc, i = 0;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			u8 buf[6];
+			buf[0] = CMD_I2C_READ;
+			buf[1] = msg[i].addr + 1;
+			buf[2] = msg[i].buf[0];
+			buf[3] = 0x00;
+			buf[4] = 0x00;
+			buf[5] = 0x01;
+			ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
+				msg[i+1].len);
+			inc = 2;
+		} else {
+			u8 buf[4+msg[i].len];
+			buf[0] = CMD_I2C_WRITE;
+			buf[1] = msg[i].addr;
+			buf[2] = msg[i].len;
+			buf[3] = 0x01;
+			memcpy(&buf[4], msg[i].buf, msg[i].len);
+			ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+			inc = 1;
+		}
+		if (ret)
+			return ret;
+
+		i += inc;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+	.master_xfer   = anysee_master_xfer,
+	.functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset []         = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+	.demod_address = 0x1a,
+	.invert = 0,
+	.xtal   = 16000000,
+	.pll_m  = 11,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.deltaf = 0xfed6,
+};
+
+static struct mt352_config anysee_mt352_config = {
+	.demod_address = 0x1e,
+	.demod_init    = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+	.demod_address = 0x1e,
+	.parallel_ts = 1,
+};
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct anysee_state *state = adap->dev->priv;
+	u8 hw_info[3];
+	u8 io_d; /* IO port D */
+
+	/* check which hardware we have
+	   We must do this call two times to get reliable values (hw bug). */
+	ret = anysee_get_hw_info(adap->dev, hw_info);
+	if (ret)
+		return ret;
+	ret = anysee_get_hw_info(adap->dev, hw_info);
+	if (ret)
+		return ret;
+
+	/* Meaning of these info bytes are guessed. */
+	info("firmware version:%d.%d.%d hardware id:%d",
+		0, hw_info[1], hw_info[2], hw_info[0]);
+
+	ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
+	if (ret)
+		return ret;
+	deb_info("%s: IO port D:%02x\n", __func__, io_d);
+
+	/* Select demod using trial and error method. */
+
+	/* Try to attach demodulator in following order:
+	      model      demod     hw  firmware
+	   1. E30        MT352     02  0.2.1
+	   2. E30        ZL10353   02  0.2.1
+	   3. E30 Plus   ZL10353   06  0.1.0
+	   4. E30C Plus  TDA10023  0a  0.1.0
+	      E30C Plus  TDA10023  0f  0.1.2 (not working)
+	*/
+
+	/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
+	adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+	adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* connect demod on IO port D for TDA10023 & ZL10353 */
+	ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
+	if (ret)
+		return ret;
+
+	/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+	adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* known not working (E30C Plus v0.1.2) */
+	if (hw_info[0] == 0x0f) {
+		info("this version of Anysee is not supported yet");
+		/* return IO port D to init value for safe */
+		ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+		return -ENODEV;
+	}
+
+	/* Philips TDA10023 DVB-C demod */
+	adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
+			      &adap->dev->i2c_adap, 0x48);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
+		return 0;
+	}
+
+	/* return IO port D to init value for safe */
+	ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+	if (ret)
+		return ret;
+
+	err("Unkown Anysee version: %02x %02x %02x. "\
+	    "Please report the <linux-dvb@linuxtv.org>.",
+	    hw_info[0], hw_info[1], hw_info[2]);
+
+	return -ENODEV;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct anysee_state *state = adap->dev->priv;
+	deb_info("%s: \n", __func__);
+
+	switch (state->tuner) {
+	case DVB_PLL_THOMSON_DTT7579:
+		/* Thomson dtt7579 (not sure) PLL inside of:
+		   Samsung DNOS404ZH102A NIM
+		   Samsung DNOS404ZH103A NIM */
+		dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+			   NULL, DVB_PLL_THOMSON_DTT7579);
+		break;
+	case DVB_PLL_SAMSUNG_DTOS403IH102A:
+		/* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
+		dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+			   &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+		break;
+	}
+
+	return 0;
+}
+
+static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	u8 buf[] = {CMD_GET_IR_CODE};
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	u8 ircode[2];
+	int i, ret;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2);
+	if (ret)
+		return ret;
+
+	*event = 0;
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	for (i = 0; i < d->props.rc_key_map_size; i++) {
+		if (keymap[i].custom == ircode[0] &&
+		    keymap[i].data == ircode[1]) {
+			*event = keymap[i].event;
+			*state = REMOTE_KEY_PRESSED;
+			return 0;
+		}
+	}
+	return 0;
+}
+
+static struct dvb_usb_rc_key anysee_rc_keys[] = {
+	{ 0x01, 0x00, KEY_0 },
+	{ 0x01, 0x01, KEY_1 },
+	{ 0x01, 0x02, KEY_2 },
+	{ 0x01, 0x03, KEY_3 },
+	{ 0x01, 0x04, KEY_4 },
+	{ 0x01, 0x05, KEY_5 },
+	{ 0x01, 0x06, KEY_6 },
+	{ 0x01, 0x07, KEY_7 },
+	{ 0x01, 0x08, KEY_8 },
+	{ 0x01, 0x09, KEY_9 },
+	{ 0x01, 0x0a, KEY_POWER },
+	{ 0x01, 0x0b, KEY_DOCUMENTS },    /* * */
+	{ 0x01, 0x19, KEY_FAVORITES },
+	{ 0x01, 0x20, KEY_SLEEP },
+	{ 0x01, 0x21, KEY_MODE },         /* 4:3 / 16:9 select */
+	{ 0x01, 0x22, KEY_ZOOM },
+	{ 0x01, 0x47, KEY_TEXT },
+	{ 0x01, 0x16, KEY_TV },           /* TV / radio select */
+	{ 0x01, 0x1e, KEY_LANGUAGE },     /* Second Audio Program */
+	{ 0x01, 0x1a, KEY_SUBTITLE },
+	{ 0x01, 0x1b, KEY_CAMERA },       /* screenshot */
+	{ 0x01, 0x42, KEY_MUTE },
+	{ 0x01, 0x0e, KEY_MENU },
+	{ 0x01, 0x0f, KEY_EPG },
+	{ 0x01, 0x17, KEY_INFO },
+	{ 0x01, 0x10, KEY_EXIT },
+	{ 0x01, 0x13, KEY_VOLUMEUP },
+	{ 0x01, 0x12, KEY_VOLUMEDOWN },
+	{ 0x01, 0x11, KEY_CHANNELUP },
+	{ 0x01, 0x14, KEY_CHANNELDOWN },
+	{ 0x01, 0x15, KEY_OK },
+	{ 0x01, 0x1d, KEY_RED },
+	{ 0x01, 0x1f, KEY_GREEN },
+	{ 0x01, 0x1c, KEY_YELLOW },
+	{ 0x01, 0x44, KEY_BLUE },
+	{ 0x01, 0x0c, KEY_SHUFFLE },      /* snapshot */
+	{ 0x01, 0x48, KEY_STOP },
+	{ 0x01, 0x50, KEY_PLAY },
+	{ 0x01, 0x51, KEY_PAUSE },
+	{ 0x01, 0x49, KEY_RECORD },
+	{ 0x01, 0x18, KEY_PREVIOUS },     /* |<< */
+	{ 0x01, 0x0d, KEY_NEXT },         /* >>| */
+	{ 0x01, 0x24, KEY_PROG1 },        /* F1 */
+	{ 0x01, 0x25, KEY_PROG2 },        /* F2 */
+};
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_properties;
+
+static int anysee_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	mutex_init(&anysee_usb_mutex);
+
+	/* There is one interface with two alternate settings.
+	   Alternate setting 0 is for bulk transfer.
+	   Alternate setting 1 is for isochronous transfer.
+	   We use bulk transfer (alternate setting 0). */
+	if (intf->num_altsetting < 1)
+		return -ENODEV;
+
+	ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
+		adapter_nr);
+	if (ret)
+		return ret;
+
+	alt = usb_altnum_to_altsetting(intf, 0);
+	if (alt == NULL) {
+		deb_info("%s: no alt found!\n", __func__);
+		return -ENODEV;
+	}
+
+	ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+		alt->desc.bAlternateSetting);
+	if (ret)
+		return ret;
+
+	if (d)
+		ret = anysee_init(d);
+
+	return ret;
+}
+
+static struct usb_device_id anysee_table [] = {
+	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
+	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, anysee_table);
+
+static struct dvb_usb_device_properties anysee_properties = {
+	.caps             = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = DEVICE_SPECIFIC,
+
+	.size_of_priv     = sizeof(struct anysee_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = anysee_streaming_ctrl,
+			.frontend_attach  = anysee_frontend_attach,
+			.tuner_attach     = anysee_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 512,
+					}
+				}
+			},
+		}
+	},
+
+	.rc_key_map       = anysee_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(anysee_rc_keys),
+	.rc_query         = anysee_rc_query,
+	.rc_interval      = 200,  /* windows driver uses 500ms */
+
+	.i2c_algo         = &anysee_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 1,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "Anysee DVB USB2.0",
+			.cold_ids = {NULL},
+			.warm_ids = {&anysee_table[0],
+				     &anysee_table[1], NULL},
+		},
+	}
+};
+
+static struct usb_driver anysee_driver = {
+	.name       = "dvb_usb_anysee",
+	.probe      = anysee_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table   = anysee_table,
+};
+
+/* module stuff */
+static int __init anysee_module_init(void)
+{
+	int ret;
+
+	ret = usb_register(&anysee_driver);
+	if (ret)
+		err("%s: usb_register failed. Error number %d", __func__, ret);
+
+	return ret;
+}
+
+static void __exit anysee_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&anysee_driver);
+}
+
+module_init(anysee_module_init);
+module_exit(anysee_module_exit);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
new file mode 100644
index 00000000000..48da3949ef0
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -0,0 +1,304 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
+ * module registers serial interface that can be used to comminicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_anysee_debug, 0x04, args)
+#define deb_reg(args...)  dprintk(dvb_usb_anysee_debug, 0x08, args)
+#define deb_i2c(args...)  dprintk(dvb_usb_anysee_debug, 0x10, args)
+#define deb_fw(args...)   dprintk(dvb_usb_anysee_debug, 0x20, args)
+
+enum cmd {
+	CMD_I2C_READ            = 0x33,
+	CMD_I2C_WRITE           = 0x31,
+	CMD_REG_READ            = 0xb0,
+	CMD_REG_WRITE           = 0xb1,
+	CMD_STREAMING_CTRL      = 0x12,
+	CMD_LED_AND_IR_CTRL     = 0x16,
+	CMD_GET_IR_CODE         = 0x41,
+	CMD_GET_HW_INFO         = 0x19,
+	CMD_SMARTCARD           = 0x34,
+};
+
+struct anysee_state {
+	u8 tuner;
+	u8 seq;
+};
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+|    00 | reply data (if any) from previous transaction
+|       | Just same reply packet as returned during previous transaction.
+|       | Needed only if reply is missed in previous transaction.
+|       | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+|    00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+|    00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+|    01 | i2c address
+----------------------------------------------------------------------------
+|    02 | data length
+|       | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-   | data
+----------------------------------------------------------------------------
+|   -59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+|    00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+|    01 | i2c address + 1
+----------------------------------------------------------------------------
+|    02 | register
+----------------------------------------------------------------------------
+|    03 | 0x00
+----------------------------------------------------------------------------
+|    04 | 0x00
+----------------------------------------------------------------------------
+|    05 | 0x01
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+|    00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+|    04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+|    00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x01 (LED)
+----------------------------------------------------------------------------
+|    03 | 0x00 blink
+|       | 0x01 lights continuously
+----------------------------------------------------------------------------
+|    04 | blink interval
+|       | 0x00 fastest (looks like LED lights continuously)
+|       | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x02 (IR)
+----------------------------------------------------------------------------
+|    03 | 0x00 IR disabled
+|       | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+|    01 | 0x00 streaming disabled
+|       | 0x01 streaming enabled
+----------------------------------------------------------------------------
+|    02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+|    00 | 0x00 code not received
+|       | 0x01 code received
+----------------------------------------------------------------------------
+|    01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+|    00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+|    00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+|    00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+|    xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 34245d1b7dd..e6b43fb3a14 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -14,6 +14,7 @@
 #define USB_VID_AFATECH				0x15a4
 #define USB_VID_ALCOR_MICRO			0x058f
 #define USB_VID_ALINK				0x05e3
+#define USB_VID_AMT				0x1c73
 #define USB_VID_ANCHOR				0x0547
 #define USB_VID_ANSONIC				0x10b9
 #define USB_VID_ANUBIS_ELECTRONIC		0x10fd
@@ -57,6 +58,7 @@
 #define USB_PID_AFATECH_AF9005				0x9020
 #define USB_VID_ALINK_DTU				0xf170
 #define USB_PID_ANSONIC_DVBT_USB			0x6000
+#define USB_PID_ANYSEE					0x861f
 #define USB_PID_AVERMEDIA_DVBT_USB_COLD			0x0001
 #define USB_PID_AVERMEDIA_DVBT_USB_WARM			0x0002
 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD		0xa800
-- 
cgit v1.2.3


From b6b2d268445ad4f5fac495bbbae6d2922f0becd9 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 28 May 2008 00:53:27 -0300
Subject: V4L/DVB (7950): AU6610: coding style fixes

- coding style fixes raised by checkpatch

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/au6610.c | 38 ++++++++++++++++++--------------------
 drivers/media/dvb/dvb-usb/au6610.h |  2 +-
 2 files changed, 19 insertions(+), 21 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
index 2ccb90fa60c..b44a3c4c545 100644
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ b/drivers/media/dvb/dvb-usb/au6610.c
@@ -3,8 +3,8 @@
  * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
  *
  *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
+ *	under the terms of the GNU General Public License as published by the
+ *      Free Software Foundation, version 2.
  *
  * see Documentation/dvb/README.dvb-usb for more information
  */
@@ -17,8 +17,8 @@
 /* debug */
 static int dvb_usb_au6610_debug;
 module_param_named(debug, dvb_usb_au6610_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
+MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))."
+	DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
@@ -42,9 +42,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
 	}
 
 	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation,
-			      USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf,
-			      sizeof(usb_buf), AU6610_USB_TIMEOUT);
-
+			      USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index,
+			      usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT);
 	if (ret < 0)
 		return ret;
 
@@ -133,12 +132,12 @@ static struct zl10353_config au6610_zl10353_config = {
 
 static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	if ((adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
-				   &adap->dev->i2c_adap)) != NULL) {
-		return 0;
-	}
+	adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe == NULL)
+		return -EIO;
 
-	return -EIO;
+	return 0;
 }
 
 static struct qt1010_config au6610_qt1010_config = {
@@ -186,7 +185,7 @@ static struct usb_device_id au6610_table [] = {
 	{ USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) },
 	{ }		/* Terminating entry */
 };
-MODULE_DEVICE_TABLE (usb, au6610_table);
+MODULE_DEVICE_TABLE(usb, au6610_table);
 
 static struct dvb_usb_device_properties au6610_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
@@ -206,7 +205,7 @@ static struct dvb_usb_device_properties au6610_properties = {
 				.u = {
 					.isoc = {
 						.framesperurb = 40,
-						.framesize = 942,   /* maximum packet size */
+						.framesize = 942,
 						.interval = 1.25,   /* 125 us */
 					}
 				}
@@ -236,12 +235,11 @@ static int __init au6610_module_init(void)
 {
 	int ret;
 
-	if ((ret = usb_register(&au6610_driver))) {
+	ret = usb_register(&au6610_driver);
+	if (ret)
 		err("usb_register failed. Error number %d", ret);
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static void __exit au6610_module_exit(void)
@@ -250,8 +248,8 @@ static void __exit au6610_module_exit(void)
 	usb_deregister(&au6610_driver);
 }
 
-module_init (au6610_module_init);
-module_exit (au6610_module_exit);
+module_init(au6610_module_init);
+module_exit(au6610_module_exit);
 
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610");
diff --git a/drivers/media/dvb/dvb-usb/au6610.h b/drivers/media/dvb/dvb-usb/au6610.h
index 4161b054c71..abca6291c72 100644
--- a/drivers/media/dvb/dvb-usb/au6610.h
+++ b/drivers/media/dvb/dvb-usb/au6610.h
@@ -4,7 +4,7 @@
 #define DVB_USB_LOG_PREFIX "au6610"
 #include "dvb-usb.h"
 
-#define deb_rc(args...)   dprintk(dvb_usb_au6610_debug,0x01,args)
+#define deb_rc(args...)   dprintk(dvb_usb_au6610_debug, 0x01, args)
 
 #define AU6610_REQ_I2C_WRITE	0x14
 #define AU6610_REQ_I2C_READ	0x13
-- 
cgit v1.2.3


From bbf23af2b10926c0d489d74814d9744cd495c3bc Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 28 May 2008 01:01:04 -0300
Subject: V4L/DVB (7951): AU6610: remove useless identify_state

- remove useless identify_state - device is always warm

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/au6610.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
index b44a3c4c545..a0895fba2e5 100644
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ b/drivers/media/dvb/dvb-usb/au6610.c
@@ -115,15 +115,6 @@ static struct i2c_algorithm au6610_i2c_algo = {
 };
 
 /* Callbacks for DVB USB */
-static int au6610_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
-				 int *cold)
-{
-	*cold = 0;
-	return 0;
-}
-
 static struct zl10353_config au6610_zl10353_config = {
 	.demod_address = 0x0f,
 	.no_tuner = 1,
@@ -191,7 +182,6 @@ static struct dvb_usb_device_properties au6610_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.size_of_priv     = 0,
-	.identify_state   = au6610_identify_state,
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -213,12 +203,13 @@ static struct dvb_usb_device_properties au6610_properties = {
 		}
 	},
 	.i2c_algo = &au6610_i2c_algo,
+
 	.num_device_descs = 1,
 	.devices = {
 		{
-			"Sigmatek DVB-110 DVB-T USB2.0",
-			{ &au6610_table[0], NULL },
-			{ NULL },
+			.name = "Sigmatek DVB-110 DVB-T USB2.0",
+			.cold_ids = {NULL},
+			.warm_ids = {&au6610_table[0], NULL},
 		},
 	}
 };
-- 
cgit v1.2.3


From 53af158a901a32dd8639fbe03db5354ab711d8f0 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 28 May 2008 03:57:39 -0300
Subject: V4L/DVB (7952): AU6610: various cosmetic changes

- update license comments
- change MODULE_DESCRIPTION from device specific to chipset specific
- correct debug switch from deb_rc to deb_info
- correct MPEG2 stream interval from 1.25 to 1
- change frontend_attach error code from -EIO to -ENODEV

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/au6610.c | 38 ++++++++++++++++++++++++--------------
 drivers/media/dvb/dvb-usb/au6610.h | 22 +++++++++++++++++++++-
 2 files changed, 45 insertions(+), 15 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
index a0895fba2e5..eb34cc3894e 100644
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ b/drivers/media/dvb/dvb-usb/au6610.c
@@ -1,24 +1,31 @@
-/* DVB USB compliant linux driver for Sigmatek DVB-110 DVB-T USB2.0 receiver
+/*
+ * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
  *
  * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
  *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the
- *      Free Software Foundation, version 2.
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
  *
- * see Documentation/dvb/README.dvb-usb for more information
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include "au6610.h"
-
 #include "zl10353.h"
 #include "qt1010.h"
 
 /* debug */
 static int dvb_usb_au6610_debug;
 module_param_named(debug, dvb_usb_au6610_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))."
-	DVB_USB_DEBUG_STATUS);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
@@ -126,7 +133,7 @@ static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
 	adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
 		&adap->dev->i2c_adap);
 	if (adap->fe == NULL)
-		return -EIO;
+		return -ENODEV;
 
 	return 0;
 }
@@ -161,7 +168,7 @@ static int au6610_probe(struct usb_interface *intf,
 		alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING);
 
 		if (alt == NULL) {
-			deb_rc("no alt found!\n");
+			deb_info("%s: no alt found!\n", __func__);
 			return -ENODEV;
 		}
 		ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
@@ -171,7 +178,6 @@ static int au6610_probe(struct usb_interface *intf,
 	return ret;
 }
 
-
 static struct usb_device_id au6610_table [] = {
 	{ USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) },
 	{ }		/* Terminating entry */
@@ -180,8 +186,11 @@ MODULE_DEVICE_TABLE(usb, au6610_table);
 
 static struct dvb_usb_device_properties au6610_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
 	.usb_ctrl = DEVICE_SPECIFIC,
-	.size_of_priv     = 0,
+
+	.size_of_priv = 0,
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -196,12 +205,13 @@ static struct dvb_usb_device_properties au6610_properties = {
 					.isoc = {
 						.framesperurb = 40,
 						.framesize = 942,
-						.interval = 1.25,   /* 125 us */
+						.interval = 1,
 					}
 				}
 			},
 		}
 	},
+
 	.i2c_algo = &au6610_i2c_algo,
 
 	.num_device_descs = 1,
@@ -243,6 +253,6 @@ module_init(au6610_module_init);
 module_exit(au6610_module_exit);
 
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610");
+MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/au6610.h b/drivers/media/dvb/dvb-usb/au6610.h
index abca6291c72..7849abe2c61 100644
--- a/drivers/media/dvb/dvb-usb/au6610.h
+++ b/drivers/media/dvb/dvb-usb/au6610.h
@@ -1,10 +1,30 @@
+/*
+ * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
+ *
+ * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
 #ifndef _DVB_USB_AU6610_H_
 #define _DVB_USB_AU6610_H_
 
 #define DVB_USB_LOG_PREFIX "au6610"
 #include "dvb-usb.h"
 
-#define deb_rc(args...)   dprintk(dvb_usb_au6610_debug, 0x01, args)
+#define deb_info(args...)   dprintk(dvb_usb_au6610_debug, 0x01, args)
 
 #define AU6610_REQ_I2C_WRITE	0x14
 #define AU6610_REQ_I2C_READ	0x13
-- 
cgit v1.2.3


From fb49558c3b6b55c0f3378b7e8935c2d9e357f93a Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 28 May 2008 22:16:31 -0300
Subject: V4L/DVB (8014): gl861: coding style fixes

- coding style fixes raised by checkpatch

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/gl861.c | 38 +++++++++++++++++++-------------------
 drivers/media/dvb/dvb-usb/gl861.h |  2 +-
 2 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
index 037f7ffb47b..6f596ed4176 100644
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ b/drivers/media/dvb/dvb-usb/gl861.c
@@ -1,8 +1,8 @@
 /* DVB USB compliant linux driver for GL861 USB2.0 devices.
  *
  *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation, version 2.
  *
  * see Documentation/dvb/README.dvb-usb for more information
  */
@@ -13,9 +13,9 @@
 
 /* debug */
 static int dvb_usb_gl861_debug;
-module_param_named(debug,dvb_usb_gl861_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
+module_param_named(debug, dvb_usb_gl861_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))."
+	DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
@@ -70,7 +70,7 @@ static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		/* write/read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
 			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
-					  msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
+				msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
 				break;
 			i++;
 		} else
@@ -102,12 +102,13 @@ static struct zl10353_config gl861_zl10353_config = {
 
 static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	if ((adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
-				   &adap->dev->i2c_adap)) != NULL) {
-		return 0;
-	}
 
-	return -EIO;
+	adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe == NULL)
+		return -EIO;
+
+	return 0;
 }
 
 static struct qt1010_config gl861_qt1010_config = {
@@ -156,7 +157,7 @@ static struct usb_device_id gl861_table [] = {
 		{ USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU) },
 		{ }		/* Terminating entry */
 };
-MODULE_DEVICE_TABLE (usb, gl861_table);
+MODULE_DEVICE_TABLE(usb, gl861_table);
 
 static struct dvb_usb_device_properties gl861_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
@@ -180,7 +181,7 @@ static struct dvb_usb_device_properties gl861_properties = {
 				}
 			}
 		},
-	}},
+	} },
 	.i2c_algo         = &gl861_i2c_algo,
 
 	.num_device_descs = 2,
@@ -210,12 +211,11 @@ static int __init gl861_module_init(void)
 {
 	int ret;
 
-	if ((ret = usb_register(&gl861_driver))) {
+	ret = usb_register(&gl861_driver);
+	if (ret)
 		err("usb_register failed. Error number %d", ret);
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static void __exit gl861_module_exit(void)
@@ -224,8 +224,8 @@ static void __exit gl861_module_exit(void)
 	usb_deregister(&gl861_driver);
 }
 
-module_init (gl861_module_init);
-module_exit (gl861_module_exit);
+module_init(gl861_module_init);
+module_exit(gl861_module_exit);
 
 MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>");
 MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861");
diff --git a/drivers/media/dvb/dvb-usb/gl861.h b/drivers/media/dvb/dvb-usb/gl861.h
index 72a51afd5ee..c54855e2c23 100644
--- a/drivers/media/dvb/dvb-usb/gl861.h
+++ b/drivers/media/dvb/dvb-usb/gl861.h
@@ -4,7 +4,7 @@
 #define DVB_USB_LOG_PREFIX "gl861"
 #include "dvb-usb.h"
 
-#define deb_rc(args...)   dprintk(dvb_usb_gl861_debug,0x01,args)
+#define deb_rc(args...)   dprintk(dvb_usb_gl861_debug, 0x01, args)
 
 #define GL861_WRITE		0x40
 #define GL861_READ		0xc0
-- 
cgit v1.2.3


From 5ae2fcaee4b0d6bf0fa5d9bd71e1291c9a9a6e60 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Mon, 9 Jun 2008 22:58:22 -0300
Subject: V4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4

- support for Anysee E30C Plus rev 0.4
 - set IO port E
 - set correct TS mode
- change deltaf according to latest Windows driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/anysee.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index dada92a14cf..a3f9bbc355b 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -227,7 +227,8 @@ static struct tda10023_config anysee_tda10023_config = {
 	.pll_m  = 11,
 	.pll_p  = 3,
 	.pll_n  = 1,
-	.deltaf = 0xfed6,
+	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
+	.deltaf = 0xfeeb,
 };
 
 static struct mt352_config anysee_mt352_config = {
@@ -272,8 +273,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 	   1. E30        MT352     02  0.2.1
 	   2. E30        ZL10353   02  0.2.1
 	   3. E30 Plus   ZL10353   06  0.1.0
-	   4. E30C Plus  TDA10023  0a  0.1.0
-	      E30C Plus  TDA10023  0f  0.1.2 (not working)
+	   4. E30C Plus  TDA10023  0a  0.1.0    rev 0.2
+	   4. E30C Plus  TDA10023  0f  0.1.2    rev 0.4
 	*/
 
 	/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
@@ -305,13 +306,10 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 		return 0;
 	}
 
-	/* known not working (E30C Plus v0.1.2) */
-	if (hw_info[0] == 0x0f) {
-		info("this version of Anysee is not supported yet");
-		/* return IO port D to init value for safe */
-		ret = anysee_write_reg(adap->dev, 0xb0, io_d);
-		return -ENODEV;
-	}
+	/* IO port E - E30C rev 0.4 board requires this */
+	ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
+	if (ret)
+		return ret;
 
 	/* Philips TDA10023 DVB-C demod */
 	adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
-- 
cgit v1.2.3


From 9fdd9caf44296213c1e1130e86c2f919f83124da Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 11 Jun 2008 11:43:19 -0300
Subject: V4L/DVB (8032): Anysee: fix Kconfig

- select DVB_PLL
- fix typos in comments

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/Kconfig  | 1 +
 drivers/media/dvb/dvb-usb/anysee.c | 4 ++--
 drivers/media/dvb/dvb-usb/anysee.h | 4 ++--
 3 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 3f7b9b6326b..cae574fa79e 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -244,6 +244,7 @@ config DVB_USB_AF9005_REMOTE
 config DVB_USB_ANYSEE
 	tristate "Anysee DVB-T/C USB2.0 support"
 	depends on DVB_USB
+	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index a3f9bbc355b..adfd4fc82ef 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -23,8 +23,8 @@
  * Card reader in Anysee is nothing more than ISO 7816 card reader.
  * There is no hardware CAM in any Anysee device sold.
  * In my understanding it should be implemented by making own module
- * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
- * module registers serial interface that can be used to comminicate
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
  * with any ISO 7816 smart card.
  *
  * Any help according to implement serial smart card reader support
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index 48da3949ef0..7ca01ff6e13 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -23,8 +23,8 @@
  * Card reader in Anysee is nothing more than ISO 7816 card reader.
  * There is no hardware CAM in any Anysee device sold.
  * In my understanding it should be implemented by making own module
- * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This
- * module registers serial interface that can be used to comminicate
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
  * with any ISO 7816 smart card.
  *
  * Any help according to implement serial smart card reader support
-- 
cgit v1.2.3


From 03a0ea11e2db5cf4fb47ca78cb25c4f7b9c8293b Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Wed, 18 Jun 2008 09:27:21 -0300
Subject: V4L/DVB (8059): Add missing select for MEDIA_TUNER_TDA827X

$ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \;
linux/drivers/media/dvb/dvb-usb/m920x.c
linux/drivers/media/dvb/ttpci/budget-ci.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index cae574fa79e..bee1bf3c9db 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -120,6 +120,7 @@ config DVB_USB_M920X
 	depends on DVB_USB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
-- 
cgit v1.2.3


From 980b59fb5b4ed4fac91dc57f4e50593faa804f8f Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Wed, 18 Jun 2008 16:23:52 -0300
Subject: V4L/DVB (8065): Add missing selects at dvb-usb/Kconfig

Add missing auto-selects for MEDIA_TUNER_XC2028 and DVB_TDA1004X at
dvb-usb/Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index bee1bf3c9db..7847a8320fe 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -76,6 +76,7 @@ config DVB_USB_DIB0700
 	select DVB_DIB3000MC
 	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
@@ -107,6 +108,7 @@ config DVB_USB_CXUSB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -121,6 +123,7 @@ config DVB_USB_M920X
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
-- 
cgit v1.2.3


From f5376adacc693155c24e4e7be3777bdd0eeb99f7 Mon Sep 17 00:00:00 2001
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Date: Sat, 28 Jun 2008 05:01:30 -0300
Subject: V4L/DVB (8147): cxusb: add initial support for AVerTVHD Volar

Add initial support for this device. The AGC and tracking filter
settings for the mxl5003 are known to be wrong, but it generally works.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/cxusb.c       | 146 +++++++++++++++++++++++++++++++-
 drivers/media/dvb/dvb-usb/cxusb.h       |   3 +
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h |   5 ++
 3 files changed, 150 insertions(+), 4 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 0286156704f..578afce6884 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -35,6 +35,7 @@
 #include "zl10353.h"
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
+#include "mxl5005s.h"
 
 /* debug */
 static int dvb_usb_cxusb_debug;
@@ -43,9 +44,8 @@ MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_ST
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-#define deb_info(args...)   dprintk(dvb_usb_cxusb_debug,0x01,args)
-#define deb_i2c(args...)    if (d->udev->descriptor.idVendor == USB_VID_MEDION) \
-				dprintk(dvb_usb_cxusb_debug,0x01,args)
+#define deb_info(args...)   dprintk(dvb_usb_cxusb_debug, 0x03, args)
+#define deb_i2c(args...)    dprintk(dvb_usb_cxusb_debug, 0x02, args)
 
 static int cxusb_ctrl_msg(struct dvb_usb_device *d,
 			  u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
@@ -202,6 +202,46 @@ static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
 		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
 }
 
+static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+	if (!onoff)
+		return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0);
+	if (d->state == DVB_USB_STATE_INIT &&
+	    usb_set_interface(d->udev, 0, 0) < 0)
+		err("set interface failed");
+	do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+		   !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
+		   !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
+	if (!ret) {
+		/* FIXME: We don't know why, but we need to configure the
+		 * lgdt3303 with the register settings below on resume */
+		int i;
+		u8 buf, bufs[] = {
+			0x0e, 0x2, 0x00, 0x7f,
+			0x0e, 0x2, 0x02, 0xfe,
+			0x0e, 0x2, 0x02, 0x01,
+			0x0e, 0x2, 0x00, 0x03,
+			0x0e, 0x2, 0x0d, 0x40,
+			0x0e, 0x2, 0x0e, 0x87,
+			0x0e, 0x2, 0x0f, 0x8e,
+			0x0e, 0x2, 0x10, 0x01,
+			0x0e, 0x2, 0x14, 0xd7,
+			0x0e, 0x2, 0x47, 0x88,
+		};
+		msleep(20);
+		for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) {
+			ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE,
+					     bufs+i, 4, &buf, 1);
+			if (ret)
+				break;
+			if (buf != 0x8)
+				return -EREMOTEIO;
+		}
+	}
+	return ret;
+}
+
 static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	u8 b = 0;
@@ -233,6 +273,16 @@ static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return 0;
 }
 
+static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	if (onoff)
+		cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0);
+	else
+		cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF,
+			       NULL, 0, NULL, 0);
+	return 0;
+}
+
 static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
@@ -423,6 +473,12 @@ static struct lgdt330x_config cxusb_lgdt3303_config = {
 	.demod_chip    = LGDT3303,
 };
 
+static struct lgdt330x_config cxusb_aver_lgdt3303_config = {
+	.demod_address       = 0x0e,
+	.demod_chip          = LGDT3303,
+	.clock_polarity_flip = 2,
+};
+
 static struct mt352_config cxusb_dee1601_config = {
 	.demod_address = 0x0f,
 	.demod_init    = cxusb_dee1601_demod_init,
@@ -453,6 +509,24 @@ static struct mt352_config cxusb_mt352_xc3028_config = {
 	.demod_init = cxusb_mt352_demod_init,
 };
 
+/* FIXME: needs tweaking */
+static struct mxl5005s_config aver_a868r_tuner = {
+	.i2c_address     = 0x63,
+	.if_freq         = 6000000UL,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
 /* Callbacks for DVB USB */
 static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 {
@@ -533,6 +607,13 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(mxl5005s_attach, adap->fe,
+		   &adap->dev->i2c_adap, &aver_a868r_tuner);
+	return 0;
+}
+
 static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	u8 b;
@@ -562,6 +643,16 @@ static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
 	return -EIO;
 }
 
+static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	adap->fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL)
+		return 0;
+
+	return -EIO;
+}
+
 static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	/* used in both lgz201 and th7579 */
@@ -736,6 +827,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
+static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
 
 static int cxusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
@@ -756,7 +848,10 @@ static int cxusb_probe(struct usb_interface *intf,
 				     THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf,
 				&cxusb_bluebird_nano2_needsfirmware_properties,
-				     THIS_MODULE, NULL, adapter_nr))
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0)
 		return 0;
 
 	return -EINVAL;
@@ -779,6 +874,7 @@ static struct usb_device_id cxusb_table [] = {
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
+	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1182,6 +1278,48 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope
 	}
 };
 
+static struct dvb_usb_device_properties cxusb_aver_a868r_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = CYPRESS_FX2,
+
+	.size_of_priv     = sizeof(struct cxusb_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = cxusb_aver_streaming_ctrl,
+			.frontend_attach  = cxusb_aver_lgdt3303_frontend_attach,
+			.tuner_attach     = cxusb_mxl5003s_tuner_attach,
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x04,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
+
+		},
+	},
+	.power_ctrl       = cxusb_aver_power_ctrl,
+
+	.i2c_algo         = &cxusb_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "AVerMedia AVerTVHD Volar (A868R)",
+			{ NULL },
+			{ &cxusb_table[16], NULL },
+		},
+	}
+};
+
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h
index 4768a2c3551..1a51eafd31b 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.h
+++ b/drivers/media/dvb/dvb-usb/cxusb.h
@@ -20,6 +20,9 @@
 #define CMD_STREAMING_ON  0x36
 #define CMD_STREAMING_OFF 0x37
 
+#define CMD_AVER_STREAM_ON  0x18
+#define CMD_AVER_STREAM_OFF 0x19
+
 #define CMD_GET_IR_CODE   0x47
 
 #define CMD_ANALOG        0x50
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index e6b43fb3a14..75ec9caa142 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -137,6 +137,11 @@
 #define USB_PID_AVERMEDIA_EXPRESS			0xb568
 #define USB_PID_AVERMEDIA_VOLAR				0xa807
 #define USB_PID_AVERMEDIA_VOLAR_2			0xb808
+#define USB_PID_AVERMEDIA_VOLAR_A868R			0xa868
+#define USB_PID_AVERMEDIA_MCE_USB_M038			0x1228
+#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R	0x0039
+#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC	0x1039
+#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT	0x2039
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
-- 
cgit v1.2.3


From 30b4d355aa02ba274279eae1187539b85bd100ed Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 2 Jul 2008 12:55:49 -0300
Subject: V4L/DVB (8183): cxusb: select MEDIA_TUNER_MXL5005S if
 !DVB_FE_CUSTOMISE

After adding support for AVerTVHD Volar, DVB_USB_CXUSB must
select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 7847a8320fe..a577c0f89f6 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -109,6 +109,7 @@ config DVB_USB_CXUSB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
-- 
cgit v1.2.3


From d01eb2dc7d5265ec3bee9ec1b8ab79155e1310d6 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Thu, 3 Jul 2008 23:43:36 -0300
Subject: V4L/DVB (8186): dib0700: add support for Hauppauge Nova-TD Stick
 52009

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++-
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index c4d40fe01d5..3dd20bfbed3 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1117,6 +1117,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1372,7 +1373,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 2,
+		.num_device_descs = 3,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1381,6 +1382,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Pinnacle PCTV Dual DVB-T Diversity Stick",
 				{ &dib0700_usb_id_table[18], NULL },
 				{ NULL },
+			},
+			{   "Hauppauge Nova-TD Stick (52009)",
+				{ &dib0700_usb_id_table[35], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 75ec9caa142..e5238b31e94 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -134,6 +134,7 @@
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070
 #define USB_PID_HAUPPAUGE_MYTV_T			0x7080
 #define USB_PID_HAUPPAUGE_NOVA_TD_STICK			0x9580
+#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009		0x5200
 #define USB_PID_AVERMEDIA_EXPRESS			0xb568
 #define USB_PID_AVERMEDIA_VOLAR				0xa807
 #define USB_PID_AVERMEDIA_VOLAR_2			0xb808
-- 
cgit v1.2.3


From f87086e302300fdff1bd32049deb7a7f3e3de7da Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 18 Jul 2008 00:50:58 -0300
Subject: v4l-dvb: remove legacy checks to allow support for kernels < 2.6.10

Also remove some blank lines that were used to split compat code at -devel
tree.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/dvb-usb/dvb-usb-i2c.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/media/dvb/dvb-usb')

diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
index 23428cd3075..326f7608954 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
@@ -20,11 +20,7 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
 	}
 
 	strncpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name));
-#ifdef I2C_ADAP_CLASS_TV_DIGITAL
-	d->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL,
-#else
 	d->i2c_adap.class = I2C_CLASS_TV_DIGITAL,
-#endif
 	d->i2c_adap.algo      = d->props.i2c_algo;
 	d->i2c_adap.algo_data = NULL;
 	d->i2c_adap.dev.parent = &d->udev->dev;
-- 
cgit v1.2.3