From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/media/radio/Kconfig | 354 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 354 insertions(+) create mode 100644 drivers/media/radio/Kconfig (limited to 'drivers/media/radio/Kconfig') diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig new file mode 100644 index 00000000000..d318be383de --- /dev/null +++ b/drivers/media/radio/Kconfig @@ -0,0 +1,354 @@ +# +# Multimedia Video device configuration +# + +menu "Radio Adapters" + depends on VIDEO_DEV!=n + +config RADIO_CADET + tristate "ADS Cadet AM/FM Tuner" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these AM/FM radio cards, and then + fill in the port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + Further documentation on this driver can be found on the WWW at + . + + To compile this driver as a module, choose M here: the + module will be called radio-cadet. + +config RADIO_RTRACK + tristate "AIMSlab RadioTrack (aka RadioReveal) support" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + Note that newer AIMSlab RadioTrack cards have a different chipset + and are not supported by this driver. For these cards, use the + RadioTrack II driver below. + + If you have a GemTeks combined (PnP) sound- and radio card you must + use this driver as a module and setup the card with isapnptools. + You must also pass the module a suitable io parameter, 0x248 has + been reported to be used by these cards. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . More information is + contained in the file + . + + To compile this driver as a module, choose M here: the + module will be called radio-aimslab. + +config RADIO_RTRACK_PORT + hex "RadioTrack i/o port (0x20f or 0x30f)" + depends on RADIO_RTRACK=y + default "20f" + help + Enter either 0x30f or 0x20f here. The card default is 0x30f, if you + haven't changed the jumper setting on the card. + +config RADIO_RTRACK2 + tristate "AIMSlab RadioTrack II support" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have this FM radio card, and then fill in the + port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-rtrack2. + +config RADIO_RTRACK2_PORT + hex "RadioTrack II i/o port (0x20c or 0x30c)" + depends on RADIO_RTRACK2=y + default "30c" + help + Enter either 0x30c or 0x20c here. The card default is 0x30c, if you + haven't changed the jumper setting on the card. + +config RADIO_AZTECH + tristate "Aztech/Packard Bell Radio" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-aztech. + +config RADIO_AZTECH_PORT + hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" + depends on RADIO_AZTECH=y + default "350" + help + Enter either 0x350 or 0x358 here. The card default is 0x350, if you + haven't changed the setting of jumper JP3 on the card. Removing the + jumper sets the card to 0x358. + +config RADIO_GEMTEK + tristate "GemTek Radio Card support" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have this FM radio card, and then fill in the + port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-gemtek. + +config RADIO_GEMTEK_PORT + hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)" + depends on RADIO_GEMTEK=y + default "34c" + help + Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is + 0x34c, if you haven't changed the jumper setting on the card. On + Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O + port is 0x28c. + +config RADIO_GEMTEK_PCI + tristate "GemTek PCI Radio Card support" + depends on VIDEO_DEV && PCI + ---help--- + Choose Y here if you have this PCI FM radio card. + + In order to control your radio card, you will need to use programs + that are compatible with the Video for Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-gemtek-pci. + +config RADIO_MAXIRADIO + tristate "Guillemot MAXI Radio FM 2000 radio" + depends on VIDEO_DEV && PCI + ---help--- + Choose Y here if you have this radio card. This card may also be + found as Gemtek PCI FM. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-maxiradio. + +config RADIO_MAESTRO + tristate "Maestro on board radio" + depends on VIDEO_DEV + ---help--- + Say Y here to directly support the on-board radio tuner on the + Maestro 2 or 2E sound card. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-maestro. + +config RADIO_MIROPCM20 + tristate "miroSOUND PCM20 radio" + depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER + ---help--- + Choose Y here if you have this FM radio card. You also need to say Y + to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound") + for this to work. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called miropcm20. + +config RADIO_MIROPCM20_RDS + tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)" + depends on RADIO_MIROPCM20 && EXPERIMENTAL + ---help--- + Choose Y here if you want to see RDS/RBDS information like + RadioText, Programme Service name, Clock Time and date, Programme + TYpe and Traffic Announcement/Programme identification. You also + need to say Y to "miroSOUND PCM20 radio" and devfs! + + It's not possible to read the raw RDS packets from the device, so + the driver cant provide an V4L interface for this. But the + availability of RDS is reported over V4L by the basic driver + already. Here RDS can be read from files in /dev/v4l/rds. + + To compile this driver as a module, choose M here: the + module will be called miropcm20-rds. + +config RADIO_SF16FMI + tristate "SF16FMI Radio" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these FM radio cards. If you + compile the driver into the kernel and your card is not PnP one, you + have to add "sf16fm=" to the kernel command line (I/O address is + 0x284 or 0x384). + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-sf16fmi. + +config RADIO_SF16FMR2 + tristate "SF16FMR2 Radio" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these FM radio cards. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found on the WWW at + . + + To compile this driver as a module, choose M here: the + module will be called radio-sf16fmr2. + +config RADIO_TERRATEC + tristate "TerraTec ActiveRadio ISA Standalone" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have this FM radio card, and then fill in the + port address below. (TODO) + + Note: This driver is in its early stages. Right now volume and + frequency control and muting works at least for me, but + unfortunately I have not found anybody who wants to use this card + with Linux. So if it is this what YOU are trying to do right now, + PLEASE DROP ME A NOTE!! Rolf Offermanns . + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-terratec. + +config RADIO_TERRATEC_PORT + hex "Terratec i/o port (normally 0x590)" + depends on RADIO_TERRATEC=y + default "590" + help + Fill in the I/O port of your TerraTec FM radio card. If unsure, go + with the default. + +config RADIO_TRUST + tristate "Trust FM radio card" + depends on ISA && VIDEO_DEV + help + This is a driver for the Trust FM radio cards. Say Y if you have + such a card and want to use it under Linux. + + To compile this driver as a module, choose M here: the + module will be called radio-trust. + +config RADIO_TRUST_PORT + hex "Trust i/o port (usually 0x350 or 0x358)" + depends on RADIO_TRUST=y + default "350" + help + Enter the I/O port of your Trust FM radio card. If unsure, try the + values "0x350" or "0x358". + +config RADIO_TYPHOON + tristate "Typhoon Radio (a.k.a. EcoRadio)" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these FM radio cards, and then fill + in the port address and the frequency used for muting below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-typhoon. + +config RADIO_TYPHOON_PROC_FS + bool "Support for /proc/radio-typhoon" + depends on PROC_FS && RADIO_TYPHOON + help + Say Y here if you want the typhoon radio card driver to write + status information (frequency, volume, muted, mute frequency, + base address) to /proc/radio-typhoon. The file can be viewed with + your favorite pager (i.e. use "more /proc/radio-typhoon" or "less + /proc/radio-typhoon" or simply "cat /proc/radio-typhoon"). + +config RADIO_TYPHOON_PORT + hex "Typhoon I/O port (0x316 or 0x336)" + depends on RADIO_TYPHOON=y + default "316" + help + Enter the I/O port of your Typhoon or EcoRadio radio card. + +config RADIO_TYPHOON_MUTEFREQ + int "Typhoon frequency set when muting the device (kHz)" + depends on RADIO_TYPHOON=y + default "87500" + help + Enter the frequency used for muting the radio. The device is never + completely silent. If the volume is just turned down, you can still + hear silent voices and music. For that reason, the frequency of the + radio device is set to the frequency you can enter here whenever + the device is muted. There should be no local radio station at that + frequency. + +config RADIO_ZOLTRIX + tristate "Zoltrix Radio" + depends on ISA && VIDEO_DEV + ---help--- + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + . + + To compile this driver as a module, choose M here: the + module will be called radio-zoltrix. + +config RADIO_ZOLTRIX_PORT + hex "ZOLTRIX I/O port (0x20c or 0x30c)" + depends on RADIO_ZOLTRIX=y + default "20c" + help + Enter the I/O port of your Zoltrix radio card. + +endmenu + -- cgit v1.2.3