From af51715079e7fb6b290e1881d63d815dc4de5011 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 8 Aug 2007 09:11:32 -0700 Subject: MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell Signed-off-by: Pierre Ossman --- drivers/mmc/core/bus.c | 24 +++++-- drivers/mmc/core/core.c | 28 ++++++-- drivers/mmc/core/core.h | 2 + drivers/mmc/core/mmc.c | 50 +++++++++---- drivers/mmc/core/mmc_ops.c | 166 +++++++++++++++++++++++++++++++++++--------- drivers/mmc/core/mmc_ops.h | 3 + drivers/mmc/core/sd.c | 48 ++++++++++--- drivers/mmc/core/sd_ops.c | 59 ++++++++++++---- drivers/mmc/core/sdio.c | 29 +++++--- drivers/mmc/core/sdio_ops.c | 66 +++++++++++++----- 10 files changed, 372 insertions(+), 103 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 733ac95331c..8d6f6014870 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -243,10 +243,17 @@ int mmc_add_card(struct mmc_card *card) break; } - printk(KERN_INFO "%s: new %s%s card at address %04x\n", - mmc_hostname(card->host), - mmc_card_highspeed(card) ? "high speed " : "", - type, card->rca); + if (mmc_host_is_spi(card->host)) { + printk(KERN_INFO "%s: new %s%s card on SPI\n", + mmc_hostname(card->host), + mmc_card_highspeed(card) ? "high speed " : "", + type); + } else { + printk(KERN_INFO "%s: new %s%s card at address %04x\n", + mmc_hostname(card->host), + mmc_card_highspeed(card) ? "high speed " : "", + type, card->rca); + } card->dev.uevent_suppress = 1; @@ -278,8 +285,13 @@ int mmc_add_card(struct mmc_card *card) void mmc_remove_card(struct mmc_card *card) { if (mmc_card_present(card)) { - printk(KERN_INFO "%s: card %04x removed\n", - mmc_hostname(card->host), card->rca); + if (mmc_host_is_spi(card->host)) { + printk(KERN_INFO "%s: SPI card removed\n", + mmc_hostname(card->host)); + } else { + printk(KERN_INFO "%s: card %04x removed\n", + mmc_hostname(card->host), card->rca); + } if (card->host->bus_ops->sysfs_remove) card->host->bus_ops->sysfs_remove(card->host, card); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index bffcaf8df35..bad39442f8f 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -41,6 +41,14 @@ extern int mmc_attach_sdio(struct mmc_host *host, u32 ocr); static struct workqueue_struct *workqueue; +/* + * Enabling software CRCs on the data blocks can be a significant (30%) + * performance cost, and for other reasons may not always be desired. + * So we allow it it to be disabled. + */ +int use_spi_crc = 1; +module_param(use_spi_crc, bool, 0); + /* * Internal function. Schedule delayed work in the MMC work queue. */ @@ -71,6 +79,11 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) struct mmc_command *cmd = mrq->cmd; int err = cmd->error; + if (err && cmd->retries && mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + cmd->retries = 0; + } + if (err && cmd->retries) { pr_debug("%s: req failed (CMD%u): %d, retrying...\n", mmc_hostname(host), cmd->opcode, err); @@ -453,8 +466,13 @@ static void mmc_power_up(struct mmc_host *host) int bit = fls(host->ocr_avail) - 1; host->ios.vdd = bit; - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; - host->ios.chip_select = MMC_CS_DONTCARE; + if (mmc_host_is_spi(host)) { + host->ios.chip_select = MMC_CS_HIGH; + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; + } else { + host->ios.chip_select = MMC_CS_DONTCARE; + host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; + } host->ios.power_mode = MMC_POWER_UP; host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; @@ -481,8 +499,10 @@ static void mmc_power_off(struct mmc_host *host) { host->ios.clock = 0; host->ios.vdd = 0; - host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; - host->ios.chip_select = MMC_CS_DONTCARE; + if (!mmc_host_is_spi(host)) { + host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; + host->ios.chip_select = MMC_CS_DONTCARE; + } host->ios.power_mode = MMC_POWER_OFF; host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index bb2774af9ea..39daf2fb5dc 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -48,5 +48,7 @@ void mmc_rescan(struct work_struct *work); void mmc_start_host(struct mmc_host *host); void mmc_stop_host(struct mmc_host *host); +extern int use_spi_crc; + #endif diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 6ba458951d2..65fe28860f5 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -165,8 +165,6 @@ static int mmc_read_ext_csd(struct mmc_card *card) BUG_ON(!card); - err = -EIO; - if (card->csd.mmca_vsn < CSD_SPEC_VER_4) return 0; @@ -279,10 +277,22 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (err) goto err; + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + /* * Fetch CID from card. */ - err = mmc_all_send_cid(host, cid); + if (mmc_host_is_spi(host)) + err = mmc_send_cid(host, cid); + else + err = mmc_all_send_cid(host, cid); if (err) goto err; @@ -309,13 +319,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * Set card RCA. + * For native busses: set card RCA and quit open drain mode. */ - err = mmc_set_relative_addr(card); - if (err) - goto free_card; + if (!mmc_host_is_spi(host)) { + err = mmc_set_relative_addr(card); + if (err) + goto free_card; - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } if (!oldcard) { /* @@ -336,13 +348,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, /* * Select card, as all following commands rely on that. */ - err = mmc_select_card(card); - if (err) - goto free_card; + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto free_card; + } if (!oldcard) { /* - * Fetch and process extened CSD. + * Fetch and process extended CSD. */ err = mmc_read_ext_csd(card); if (err) @@ -502,7 +516,8 @@ static void mmc_suspend(struct mmc_host *host) BUG_ON(!host->card); mmc_claim_host(host); - mmc_deselect_cards(host); + if (!mmc_host_is_spi(host)) + mmc_deselect_cards(host); host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_release_host(host); } @@ -562,6 +577,15 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr) mmc_attach_bus(host, &mmc_ops); + /* + * We need to get OCR a different way for SPI. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_read_ocr(host, 1, &ocr); + if (err) + goto err; + } + /* * Sanity check the voltages that the card claims to * support. diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 39567f91a4b..bf4bc6adcfe 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -63,23 +63,36 @@ int mmc_go_idle(struct mmc_host *host) int err; struct mmc_command cmd; - mmc_set_chip_select(host, MMC_CS_HIGH); - - mmc_delay(1); + /* + * Non-SPI hosts need to prevent chipselect going active during + * GO_IDLE; that would put chips into SPI mode. Remind them of + * that in case of hardware that won't pull up DAT3/nCS otherwise. + * + * SPI hosts ignore ios.chip_select; it's managed according to + * rules that must accomodate non-MMC slaves which this layer + * won't even know about. + */ + if (!mmc_host_is_spi(host)) { + mmc_set_chip_select(host, MMC_CS_HIGH); + mmc_delay(1); + } memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_GO_IDLE_STATE; cmd.arg = 0; - cmd.flags = MMC_RSP_NONE | MMC_CMD_BC; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; err = mmc_wait_for_cmd(host, &cmd, 0); mmc_delay(1); - mmc_set_chip_select(host, MMC_CS_DONTCARE); + if (!mmc_host_is_spi(host)) { + mmc_set_chip_select(host, MMC_CS_DONTCARE); + mmc_delay(1); + } - mmc_delay(1); + host->use_spi_crc = 0; return err; } @@ -94,23 +107,33 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_OP_COND; - cmd.arg = ocr; - cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; + cmd.arg = mmc_host_is_spi(host) ? 0 : ocr; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; for (i = 100; i; i--) { err = mmc_wait_for_cmd(host, &cmd, 0); if (err) break; - if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) + /* if we're just probing, do a single pass */ + if (ocr == 0) break; + /* otherwise wait until reset completes */ + if (mmc_host_is_spi(host)) { + if (!(cmd.resp[0] & R1_SPI_IDLE)) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + err = -ETIMEDOUT; mmc_delay(10); } - if (rocr) + if (rocr && !mmc_host_is_spi(host)) *rocr = cmd.resp[0]; return err; @@ -160,40 +183,46 @@ int mmc_set_relative_addr(struct mmc_card *card) return 0; } -int mmc_send_csd(struct mmc_card *card, u32 *csd) +static int +mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode) { int err; struct mmc_command cmd; - BUG_ON(!card); - BUG_ON(!card->host); - BUG_ON(!csd); + BUG_ON(!host); + BUG_ON(!cxd); memset(&cmd, 0, sizeof(struct mmc_command)); - cmd.opcode = MMC_SEND_CSD; - cmd.arg = card->rca << 16; + cmd.opcode = opcode; + cmd.arg = arg; cmd.flags = MMC_RSP_R2 | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); if (err) return err; - memcpy(csd, cmd.resp, sizeof(u32) * 4); + memcpy(cxd, cmd.resp, sizeof(u32) * 4); return 0; } -int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) +static int +mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, + u32 opcode, void *buf, unsigned len) { struct mmc_request mrq; struct mmc_command cmd; struct mmc_data data; struct scatterlist sg; + void *data_buf; - BUG_ON(!card); - BUG_ON(!card->host); - BUG_ON(!ext_csd); + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(len, GFP_KERNEL); + if (data_buf == NULL) + return -ENOMEM; memset(&mrq, 0, sizeof(struct mmc_request)); memset(&cmd, 0, sizeof(struct mmc_command)); @@ -202,21 +231,31 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) mrq.cmd = &cmd; mrq.data = &data; - cmd.opcode = MMC_SEND_EXT_CSD; + cmd.opcode = opcode; cmd.arg = 0; - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; - data.blksz = 512; + /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we + * rely on callers to never use this with "native" calls for reading + * CSD or CID. Native versions of those commands use the R2 type, + * not R1 plus a data block. + */ + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = len; data.blocks = 1; data.flags = MMC_DATA_READ; data.sg = &sg; data.sg_len = 1; - sg_init_one(&sg, ext_csd, 512); + sg_init_one(&sg, data_buf, len); - mmc_set_data_timeout(&data, card); + if (card) + mmc_set_data_timeout(&data, card); - mmc_wait_for_req(card->host, &mrq); + mmc_wait_for_req(host, &mrq); + + memcpy(buf, data_buf, len); + kfree(data_buf); if (cmd.error) return cmd.error; @@ -226,6 +265,67 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) return 0; } +int mmc_send_csd(struct mmc_card *card, u32 *csd) +{ + if (!mmc_host_is_spi(card->host)) + return mmc_send_cxd_native(card->host, card->rca << 16, + csd, MMC_SEND_CSD); + + return mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16); +} + +int mmc_send_cid(struct mmc_host *host, u32 *cid) +{ + if (!mmc_host_is_spi(host)) { + if (!host->card) + return -EINVAL; + return mmc_send_cxd_native(host, host->card->rca << 16, + cid, MMC_SEND_CID); + } + + return mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16); +} + +int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd) +{ + return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, + ext_csd, 512); +} + +int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp) +{ + struct mmc_command cmd; + int err; + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = MMC_SPI_READ_OCR; + cmd.arg = highcap ? (1 << 30) : 0; + cmd.flags = MMC_RSP_SPI_R3; + + err = mmc_wait_for_cmd(host, &cmd, 0); + + *ocrp = cmd.resp[1]; + return err; +} + +int mmc_spi_set_crc(struct mmc_host *host, int use_crc) +{ + struct mmc_command cmd; + int err; + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = MMC_SPI_CRC_ON_OFF; + cmd.flags = MMC_RSP_SPI_R1; + cmd.arg = use_crc; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (!err) + host->use_spi_crc = use_crc; + return err; +} + int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value) { int err; @@ -241,7 +341,7 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value) (index << 16) | (value << 8) | set; - cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); if (err) @@ -261,13 +361,17 @@ int mmc_send_status(struct mmc_card *card, u32 *status) memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; - cmd.arg = card->rca << 16; - cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + if (!mmc_host_is_spi(card->host)) + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); if (err) return err; + /* NOTE: callers are required to understand the difference + * between "native" and SPI format status words! + */ if (status) *status = cmd.resp[0]; diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h index 76d09a93c5d..17854bf7cf0 100644 --- a/drivers/mmc/core/mmc_ops.h +++ b/drivers/mmc/core/mmc_ops.h @@ -22,6 +22,9 @@ int mmc_send_csd(struct mmc_card *card, u32 *csd); int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd); int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value); int mmc_send_status(struct mmc_card *card, u32 *status); +int mmc_send_cid(struct mmc_host *host, u32 *cid); +int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp); +int mmc_spi_set_crc(struct mmc_host *host, int use_crc); #endif diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index c86588fdaae..d1c1e0f592f 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -322,10 +322,22 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (err) goto err; + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + /* * Fetch CID from card. */ - err = mmc_all_send_cid(host, cid); + if (mmc_host_is_spi(host)) + err = mmc_send_cid(host, cid); + else + err = mmc_all_send_cid(host, cid); if (err) goto err; @@ -351,13 +363,15 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, } /* - * Set card RCA. + * For native busses: get card RCA and quit open drain mode. */ - err = mmc_send_relative_addr(host, &card->rca); - if (err) - goto free_card; + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + goto free_card; - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } if (!oldcard) { /* @@ -377,9 +391,11 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, /* * Select card, as all following commands rely on that. */ - err = mmc_select_card(card); - if (err) - goto free_card; + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto free_card; + } if (!oldcard) { /* @@ -562,7 +578,8 @@ static void mmc_sd_suspend(struct mmc_host *host) BUG_ON(!host->card); mmc_claim_host(host); - mmc_deselect_cards(host); + if (!mmc_host_is_spi(host)) + mmc_deselect_cards(host); host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_release_host(host); } @@ -622,6 +639,17 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr) mmc_attach_bus(host, &mmc_sd_ops); + /* + * We need to get OCR a different way for SPI. + */ + if (mmc_host_is_spi(host)) { + mmc_go_idle(host); + + err = mmc_spi_read_ocr(host, 0, &ocr); + if (err) + goto err; + } + /* * Sanity check the voltages that the card claims to * support. diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index 491e0306b1b..ee4029a24ef 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -33,10 +33,10 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) if (card) { cmd.arg = card->rca << 16; - cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; } else { cmd.arg = 0; - cmd.flags = MMC_RSP_R1 | MMC_CMD_BCR; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR; } err = mmc_wait_for_cmd(host, &cmd, 0); @@ -44,7 +44,7 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) return err; /* Check that card supported application commands */ - if (!(cmd.resp[0] & R1_APP_CMD)) + if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD)) return -EOPNOTSUPP; return 0; @@ -83,8 +83,14 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, memset(&mrq, 0, sizeof(struct mmc_request)); err = mmc_app_cmd(host, card); - if (err) + if (err) { + /* no point in retrying; no APP commands allowed */ + if (mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + break; + } continue; + } memset(&mrq, 0, sizeof(struct mmc_request)); @@ -99,6 +105,12 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, err = cmd->error; if (!cmd->error) break; + + /* no point in retrying illegal APP commands */ + if (mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + break; + } } return err; @@ -147,23 +159,36 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = SD_APP_OP_COND; - cmd.arg = ocr; - cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; + if (mmc_host_is_spi(host)) + cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */ + else + cmd.arg = ocr; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; for (i = 100; i; i--) { err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES); if (err) break; - if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) + /* if we're just probing, do a single pass */ + if (ocr == 0) break; + /* otherwise wait until reset completes */ + if (mmc_host_is_spi(host)) { + if (!(cmd.resp[0] & R1_SPI_IDLE)) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + err = -ETIMEDOUT; mmc_delay(10); } - if (rocr) + if (rocr && !mmc_host_is_spi(host)) *rocr = cmd.resp[0]; return err; @@ -174,6 +199,7 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr) struct mmc_command cmd; int err; static const u8 test_pattern = 0xAA; + u8 result_pattern; /* * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND @@ -182,13 +208,18 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr) */ cmd.opcode = SD_SEND_IF_COND; cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern; - cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR; + cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR; err = mmc_wait_for_cmd(host, &cmd, 0); if (err) return err; - if ((cmd.resp[0] & 0xFF) != test_pattern) + if (mmc_host_is_spi(host)) + result_pattern = cmd.resp[1] & 0xFF; + else + result_pattern = cmd.resp[0] & 0xFF; + + if (result_pattern != test_pattern) return -EIO; return 0; @@ -229,6 +260,8 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) BUG_ON(!card->host); BUG_ON(!scr); + /* NOTE: caller guarantees scr is heap-allocated */ + err = mmc_app_cmd(card->host, card); if (err) return err; @@ -242,7 +275,7 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) cmd.opcode = SD_APP_SEND_SCR; cmd.arg = 0; - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; data.blksz = 8; data.blocks = 1; @@ -278,6 +311,8 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group, BUG_ON(!card); BUG_ON(!card->host); + /* NOTE: caller guarantees resp is heap-allocated */ + mode = !!mode; value &= 0xF; @@ -292,7 +327,7 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group, cmd.arg = mode << 31 | 0x00FFFFFF; cmd.arg &= ~(0xF << (group * 4)); cmd.arg |= value << (group * 4); - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; data.blksz = 64; data.blocks = 1; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 2f3fb994c38..87a50f456ef 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -269,6 +269,15 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) if (err) goto err; + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + /* * The number of functions on the card is encoded inside * the ocr. @@ -290,20 +299,24 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) host->card = card; /* - * Set card RCA. + * For native busses: set card RCA and quit open drain mode. */ - err = mmc_send_relative_addr(host, &card->rca); - if (err) - goto remove; + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + goto remove; - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } /* * Select card, as all following commands rely on that. */ - err = mmc_select_card(card); - if (err) - goto remove; + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto remove; + } /* * Read the common registers. diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c index 98e20532452..4d289b27503 100644 --- a/drivers/mmc/core/sdio_ops.c +++ b/drivers/mmc/core/sdio_ops.c @@ -30,23 +30,39 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) cmd.opcode = SD_IO_SEND_OP_COND; cmd.arg = ocr; - cmd.flags = MMC_RSP_R4 | MMC_CMD_BCR; + cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR; for (i = 100; i; i--) { err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); if (err) break; - if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) + /* if we're just probing, do a single pass */ + if (ocr == 0) break; + /* otherwise wait until reset completes */ + if (mmc_host_is_spi(host)) { + /* + * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate + * an initialized card under SPI, but some cards + * (Marvell's) only behave when looking at this + * one. + */ + if (cmd.resp[1] & MMC_CARD_BUSY) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + err = -ETIMEDOUT; mmc_delay(10); } if (rocr) - *rocr = cmd.resp[0]; + *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0]; return err; } @@ -68,21 +84,29 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, cmd.arg |= (write && out) ? 0x08000000 : 0x00000000; cmd.arg |= addr << 9; cmd.arg |= in; - cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC; err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) return err; - if (cmd.resp[0] & R5_ERROR) - return -EIO; - if (cmd.resp[0] & R5_FUNCTION_NUMBER) - return -EINVAL; - if (cmd.resp[0] & R5_OUT_OF_RANGE) - return -ERANGE; + if (mmc_host_is_spi(card->host)) { + /* host driver already reported errors */ + } else { + if (cmd.resp[0] & R5_ERROR) + return -EIO; + if (cmd.resp[0] & R5_FUNCTION_NUMBER) + return -EINVAL; + if (cmd.resp[0] & R5_OUT_OF_RANGE) + return -ERANGE; + } - if (out) - *out = cmd.resp[0] & 0xFF; + if (out) { + if (mmc_host_is_spi(card->host)) + *out = (cmd.resp[0] >> 8) & 0xFF; + else + *out = cmd.resp[0] & 0xFF; + } return 0; } @@ -117,7 +141,7 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */ else cmd.arg |= 0x08000000 | blocks; /* block mode */ - cmd.flags = MMC_RSP_R5 | MMC_CMD_ADTC; + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC; data.blksz = blksz; data.blocks = blocks; @@ -136,12 +160,16 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, if (data.error) return data.error; - if (cmd.resp[0] & R5_ERROR) - return -EIO; - if (cmd.resp[0] & R5_FUNCTION_NUMBER) - return -EINVAL; - if (cmd.resp[0] & R5_OUT_OF_RANGE) - return -ERANGE; + if (mmc_host_is_spi(card->host)) { + /* host driver already reported errors */ + } else { + if (cmd.resp[0] & R5_ERROR) + return -EIO; + if (cmd.resp[0] & R5_FUNCTION_NUMBER) + return -EINVAL; + if (cmd.resp[0] & R5_OUT_OF_RANGE) + return -ERANGE; + } return 0; } -- cgit v1.2.3