From 1685a03e98b7e9b83e0aa692c1cc470b3aa37597 Mon Sep 17 00:00:00 2001 From: Jan Nikitenko Date: Thu, 24 Jul 2008 01:27:07 +0200 Subject: mmc_spi: put signals to low power off fix The original intention was to write a zero byte to mmc to force spi signals to low when doing power off. Somehow the spi_w8r8 call got there so a read followed the write of single zero byte. This patch changes that to simple write of zero byte without the following read. This way the power off is more reliable and completely sufficient. Signed-off-by: Jan Nikitenko Signed-off-by: David Brownell Signed-off-by: Pierre Ossman --- drivers/mmc/host/mmc_spi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 41cc63360e4..7503b81374e 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1076,6 +1076,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) */ if (canpower && ios->power_mode == MMC_POWER_OFF) { int mres; + u8 nullbyte = 0; host->spi->mode &= ~(SPI_CPOL|SPI_CPHA); mres = spi_setup(host->spi); @@ -1083,7 +1084,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) dev_dbg(&host->spi->dev, "switch to SPI mode 0 failed\n"); - if (spi_w8r8(host->spi, 0x00) < 0) + if (spi_write(host->spi, &nullbyte, 1) < 0) dev_dbg(&host->spi->dev, "put spi signals to low failed\n"); -- cgit v1.2.3