From 9a08f82b3cc522f727ace580a2aaee5402435bc8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Aug 2007 14:23:48 +0100 Subject: sdio: set the functions' block size Before a driver is probed, set the function's block size to the default so the driver is sure the block size is something sensible and it needn't explicitly set it. The default block size is the largest that's supported by both the card and the host, with a maximum of 512 to ensure aribitrarily sized transfer use the optimal (least) number of commands. See http://lkml.org/lkml/2007/8/7/150 for reasons for the block size choice. Signed-off-by: David Vrabel Signed-off-by: Pierre Ossman --- drivers/mmc/core/sdio_bus.c | 9 +++++++++ drivers/mmc/core/sdio_cis.c | 2 +- drivers/mmc/core/sdio_io.c | 49 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d229020db4a..fcb13fb0daa 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -128,11 +128,20 @@ static int sdio_bus_probe(struct device *dev) struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); const struct sdio_device_id *id; + int ret; id = sdio_match_device(func, drv); if (!id) return -ENODEV; + /* Set the default block size so the driver is sure it's something + * sensible. */ + sdio_claim_host(func); + ret = sdio_set_block_size(func, 0); + sdio_release_host(func); + if (ret) + return ret; + return drv->probe(func, id); } diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index d050c40cf04..1d03f12bbb3 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -79,7 +79,7 @@ static int cistpl_funce_func(struct sdio_func *func, return -EINVAL; /* TPLFE_MAX_BLK_SIZE */ - func->blksize = buf[12] | (buf[13] << 8); + func->max_blksize = buf[12] | (buf[13] << 8); return 0; } diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index ecdb77242e9..c2bad1195e3 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -140,6 +140,55 @@ err: } EXPORT_SYMBOL_GPL(sdio_disable_func); +/** + * sdio_set_block_size - set the block size of an SDIO function + * @func: SDIO function to change + * @blksz: new block size or 0 to use the default. + * + * The default block size is the largest supported by both the function + * and the host, with a maximum of 512 to ensure that arbitrarily sized + * data transfer use the optimal (least) number of commands. + * + * A driver may call this to override the default block size set by the + * core. This can be used to set a block size greater than the maximum + * that reported by the card; it is the driver's responsibility to ensure + * it uses a value that the card supports. + * + * Returns 0 on success, -EINVAL if the host does not support the + * requested block size, or -EIO (etc.) if one of the resultant FBR block + * size register writes failed. + * + */ +int sdio_set_block_size(struct sdio_func *func, unsigned blksz) +{ + int ret; + + if (blksz > func->card->host->max_blk_size) + return -EINVAL; + + if (blksz == 0) { + blksz = min(min( + func->max_blksize, + func->card->host->max_blk_size), + 512u); + } + + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE, + blksz & 0xff, NULL); + if (ret) + return ret; + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1, + (blksz >> 8) & 0xff, NULL); + if (ret) + return ret; + func->cur_blksize = blksz; + return 0; +} + +EXPORT_SYMBOL_GPL(sdio_set_block_size); + /** * sdio_readb - read a single byte from a SDIO function * @func: SDIO function to access -- cgit v1.2.3