From 3db72151aa4c246f8bdb8b3501972e1f1b32fe0d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 30 May 2009 17:18:15 +0100 Subject: [MTD] [NAND] S3C2410: Basic kerneldoc comment updates Move to using kerneldoc style commenting in the driver Signed-off-by: Ben Dooks --- drivers/mtd/nand/s3c2410.c | 89 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 78 insertions(+), 11 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index b7f0740d842..a2d1c70c522 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -74,6 +74,14 @@ static struct nand_ecclayout nand_hw_eccoob = { struct s3c2410_nand_info; +/** + * struct s3c2410_nand_mtd - driver MTD structure + * @mtd: The MTD instance to pass to the MTD layer. + * @chip: The NAND chip information. + * @set: The platform information supplied for this set of NAND chips. + * @info: Link back to the hardware information. + * @scan_res: The result from calling nand_scan_ident(). +*/ struct s3c2410_nand_mtd { struct mtd_info mtd; struct nand_chip chip; @@ -90,6 +98,21 @@ enum s3c_cpu_type { /* overview of the s3c2410 nand state */ +/** + * struct s3c2410_nand_info - NAND controller state. + * @mtds: An array of MTD instances on this controoler. + * @platform: The platform data for this board. + * @device: The platform device we bound to. + * @area: The IO area resource that came from request_mem_region(). + * @clk: The clock resource for this controller. + * @regs: The area mapped for the hardware registers described by @area. + * @sel_reg: Pointer to the register controlling the NAND selection. + * @sel_bit: The bit in @sel_reg to select the NAND chip. + * @mtd_count: The number of MTDs created from this controller. + * @save_sel: The contents of @sel_reg to be saved over suspend. + * @clk_rate: The clock rate from @clk. + * @cpu_type: The exact type of this controller. + */ struct s3c2410_nand_info { /* mtd info */ struct nand_hw_control controller; @@ -145,6 +168,14 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info) #define NS_IN_KHZ 1000000 +/** + * s3c_nand_calc_rate - calculate timing data. + * @wanted: The cycle time in nanoseconds. + * @clk: The clock rate in kHz. + * @max: The maximum divider value. + * + * Calculate the timing value from the given parameters. + */ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) { int result; @@ -169,6 +200,14 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) /* controller setup */ +/** + * s3c2410_nand_setrate - setup controller timing information. + * @info: The controller instance. + * + * Given the information supplied by the platform, calculate and set + * the necessary timing registers in the hardware to generate the + * necessary timing cycles to the hardware. + */ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) { struct s3c2410_platform_nand *plat = info->platform; @@ -245,6 +284,13 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) return 0; } +/** + * s3c2410_nand_inithw - basic hardware initialisation + * @info: The hardware state. + * + * Do the basic initialisation of the hardware, using s3c2410_nand_setrate() + * to setup the hardware access speeds and set the controller to be enabled. +*/ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) { int ret; @@ -268,8 +314,19 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) return 0; } -/* select chip */ - +/** + * s3c2410_nand_select_chip - select the given nand chip + * @mtd: The MTD instance for this chip. + * @chip: The chip number. + * + * This is called by the MTD layer to either select a given chip for the + * @mtd instance, or to indicate that the access has finished and the + * chip can be de-selected. + * + * The routine ensures that the nFCE line is correctly setup, and any + * platform specific selection code is called to route nFCE to the specific + * chip. + */ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) { struct s3c2410_nand_info *info; @@ -667,11 +724,16 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, } #endif -/* s3c2410_nand_init_chip +/** + * s3c2410_nand_init_chip - initialise a single instance of an chip + * @info: The base NAND controller the chip is on. + * @nmtd: The new controller MTD instance to fill in. + * @set: The information passed from the board specific platform data. * - * init a single instance of an chip -*/ - + * Initialise the given @nmtd from the information in @info and @set. This + * readies the structure for use with the MTD layer functions by ensuring + * all pointers are setup and the necessary control routines selected. + */ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *nmtd, struct s3c2410_nand_set *set) @@ -759,12 +821,17 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->ecc.mode = NAND_ECC_NONE; } -/* s3c2410_nand_update_chip +/** + * s3c2410_nand_update_chip - post probe update + * @info: The controller instance. + * @nmtd: The driver version of the MTD instance. * - * post-probe chip update, to change any items, such as the - * layout for large page nand - */ - + * This routine is called after the chip probe has succesfully completed + * and the relevant per-chip information updated. This call ensure that + * we update the internal state accordingly. + * + * The internal state is currently limited to the ECC state information. +*/ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *nmtd) { -- cgit v1.2.3