From de4148f3ef54b644a181ad75a6fb4b373f2b01f0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Dec 2009 01:57:35 +0000 Subject: MIPS: eXcite: Remove platform. The platform has never been fully merged Signed-off-by: Ralf Baechle Cc: Thomas Koeller Cc: David Woodhouse Cc: Wim Van Sebroeck Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: David Woodhouse Acked-by: Wim Van Sebroeck --- drivers/mtd/nand/Kconfig | 8 -- drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/excite_nandflash.c | 248 ------------------------------------ 3 files changed, 257 deletions(-) delete mode 100644 drivers/mtd/nand/excite_nandflash.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7678538344f..677cd53f18c 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA -config MTD_NAND_BASLER_EXCITE - tristate "Support for NAND Flash on Basler eXcite" - depends on BASLER_EXCITE - help - This enables the driver for the NAND flash device found on the - Basler eXcite Smart Camera. If built as a module, the driver - will be named excite_nandflash. - config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" depends on PCI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 460a1f39a8d..1407bd14401 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o -obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c deleted file mode 100644 index af6a6a5399e..00000000000 --- a/drivers/mtd/nand/excite_nandflash.c +++ /dev/null @@ -1,248 +0,0 @@ -/* -* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG -* Author: Thomas Koeller -* Original code by Thies Moeller -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include - -#define EXCITE_NANDFLASH_VERSION "0.1" - -/* I/O register offsets */ -#define EXCITE_NANDFLASH_DATA_BYTE 0x00 -#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c -#define EXCITE_NANDFLASH_ADDR_BYTE 0x10 -#define EXCITE_NANDFLASH_CMD_BYTE 0x14 - -/* prefix for debug output */ -static const char module_id[] = "excite_nandflash"; - -/* - * partition definition - */ -static const struct mtd_partition partition_info[] = { - { - .name = "eXcite RootFS", - .offset = 0, - .size = MTDPART_SIZ_FULL - } -}; - -static inline const struct resource * -excite_nand_get_resource(struct platform_device *d, unsigned long flags, - const char *basename) -{ - char buf[80]; - - if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf) - return NULL; - return platform_get_resource_byname(d, flags, buf); -} - -static inline void __iomem * -excite_nand_map_regs(struct platform_device *d, const char *basename) -{ - void *result = NULL; - const struct resource *const r = - excite_nand_get_resource(d, IORESOURCE_MEM, basename); - - if (r) - result = ioremap_nocache(r->start, r->end + 1 - r->start); - return result; -} - -/* controller and mtd information */ -struct excite_nand_drvdata { - struct mtd_info board_mtd; - struct nand_chip board_chip; - void __iomem *regs; - void __iomem *tgt; -}; - -/* Control function */ -static void excite_nand_control(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct excite_nand_drvdata * const d = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - switch (ctrl) { - case NAND_CTRL_CHANGE | NAND_CTRL_CLE: - d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_CTRL_ALE: - d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_NCE: - d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE; - break; - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, d->tgt); -} - -/* Return 0 if flash is busy, 1 if ready */ -static int excite_nand_devready(struct mtd_info *mtd) -{ - struct excite_nand_drvdata * const drvdata = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE); -} - -/* - * Called by device layer to remove the driver. - * The binding to the mtd and all allocated - * resources are released. - */ -static int __devexit excite_nand_remove(struct platform_device *dev) -{ - struct excite_nand_drvdata * const this = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if (unlikely(!this)) { - printk(KERN_ERR "%s: called %s without private data!!", - module_id, __func__); - return -EINVAL; - } - - /* first thing we need to do is release our mtd - * then go through freeing the resource used - */ - nand_release(&this->board_mtd); - - /* free the common resources */ - iounmap(this->regs); - kfree(this); - - DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id); - return 0; -} - -/* - * Called by device layer when it finds a device matching - * one our driver can handle. This code checks to see if - * it can allocate all necessary resources then calls the - * nand layer to look for devices. -*/ -static int __init excite_nand_probe(struct platform_device *pdev) -{ - struct excite_nand_drvdata *drvdata; /* private driver data */ - struct nand_chip *board_chip; /* private flash chip data */ - struct mtd_info *board_mtd; /* mtd info for this board */ - int scan_res; - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (unlikely(!drvdata)) { - printk(KERN_ERR "%s: no memory for drvdata\n", - module_id); - return -ENOMEM; - } - - /* bind private data into driver */ - platform_set_drvdata(pdev, drvdata); - - /* allocate and map the resource */ - drvdata->regs = - excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); - - if (unlikely(!drvdata->regs)) { - printk(KERN_ERR "%s: cannot reserve register region\n", - module_id); - kfree(drvdata); - return -ENXIO; - } - - drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - - /* initialise our chip */ - board_chip = &drvdata->board_chip; - board_chip->IO_ADDR_R = board_chip->IO_ADDR_W = - drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - board_chip->cmd_ctrl = excite_nand_control; - board_chip->dev_ready = excite_nand_devready; - board_chip->chip_delay = 25; - board_chip->ecc.mode = NAND_ECC_SOFT; - - /* link chip to mtd */ - board_mtd = &drvdata->board_mtd; - board_mtd->priv = board_chip; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id); - scan_res = nand_scan(&drvdata->board_mtd, 1); - - if (likely(!scan_res)) { - DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id); - add_mtd_partitions(&drvdata->board_mtd, partition_info, - ARRAY_SIZE(partition_info)); - } else { - iounmap(drvdata->regs); - kfree(drvdata); - printk(KERN_ERR "%s: device scan failed\n", module_id); - return -EIO; - } - return 0; -} - -static struct platform_driver excite_nand_driver = { - .driver = { - .name = "excite_nand", - .owner = THIS_MODULE, - }, - .probe = excite_nand_probe, - .remove = __devexit_p(excite_nand_remove) -}; - -static int __init excite_nand_init(void) -{ - pr_info("Basler eXcite nand flash driver Version " - EXCITE_NANDFLASH_VERSION "\n"); - return platform_driver_register(&excite_nand_driver); -} - -static void __exit excite_nand_exit(void) -{ - platform_driver_unregister(&excite_nand_driver); -} - -module_init(excite_nand_init); -module_exit(excite_nand_exit); - -MODULE_AUTHOR("Thomas Koeller "); -MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(EXCITE_NANDFLASH_VERSION) -- cgit v1.2.3