From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/3c501.c | 940 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 940 insertions(+) create mode 100644 drivers/net/3c501.c (limited to 'drivers/net/3c501.c') diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c new file mode 100644 index 00000000000..f6d51ce34b0 --- /dev/null +++ b/drivers/net/3c501.c @@ -0,0 +1,940 @@ +/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */ +/* + Written 1992,1993,1994 Donald Becker + + Copyright 1993 United States Government as represented by the + Director, National Security Agency. This software may be used and + distributed according to the terms of the GNU General Public License, + incorporated herein by reference. + + This is a device driver for the 3Com Etherlink 3c501. + Do not purchase this card, even as a joke. It's performance is horrible, + and it breaks in many ways. + + The original author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Fixed (again!) the missing interrupt locking on TX/RX shifting. + Alan Cox + + Removed calls to init_etherdev since they are no longer needed, and + cleaned up modularization just a bit. The driver still allows only + the default address for cards when loaded as a module, but that's + really less braindead than anyone using a 3c501 board. :) + 19950208 (invid@msen.com) + + Added traps for interrupts hitting the window as we clear and TX load + the board. Now getting 150K/second FTP with a 3c501 card. Still playing + with a TX-TX optimisation to see if we can touch 180-200K/second as seems + theoretically maximum. + 19950402 Alan Cox + + Cleaned up for 2.3.x because we broke SMP now. + 20000208 Alan Cox + + Check up pass for 2.5. Nothing significant changed + 20021009 Alan Cox + + Fixed zero fill corner case + 20030104 Alan Cox + + + For the avoidance of doubt the "preferred form" of this code is one which + is in an open non patent encumbered format. Where cryptographic key signing + forms part of the process of creating an executable the information + including keys needed to generate an equivalently functional executable + are deemed to be part of the source code. + +*/ + + +/** + * DOC: 3c501 Card Notes + * + * Some notes on this thing if you have to hack it. [Alan] + * + * Some documentation is available from 3Com. Due to the boards age + * standard responses when you ask for this will range from 'be serious' + * to 'give it to a museum'. The documentation is incomplete and mostly + * of historical interest anyway. + * + * The basic system is a single buffer which can be used to receive or + * transmit a packet. A third command mode exists when you are setting + * things up. + * + * If it's transmitting it's not receiving and vice versa. In fact the + * time to get the board back into useful state after an operation is + * quite large. + * + * The driver works by keeping the board in receive mode waiting for a + * packet to arrive. When one arrives it is copied out of the buffer + * and delivered to the kernel. The card is reloaded and off we go. + * + * When transmitting lp->txing is set and the card is reset (from + * receive mode) [possibly losing a packet just received] to command + * mode. A packet is loaded and transmit mode triggered. The interrupt + * handler runs different code for transmit interrupts and can handle + * returning to receive mode or retransmissions (yes you have to help + * out with those too). + * + * DOC: Problems + * + * There are a wide variety of undocumented error returns from the card + * and you basically have to kick the board and pray if they turn up. Most + * only occur under extreme load or if you do something the board doesn't + * like (eg touching a register at the wrong time). + * + * The driver is less efficient than it could be. It switches through + * receive mode even if more transmits are queued. If this worries you buy + * a real Ethernet card. + * + * The combination of slow receive restart and no real multicast + * filter makes the board unusable with a kernel compiled for IP + * multicasting in a real multicast environment. That's down to the board, + * but even with no multicast programs running a multicast IP kernel is + * in group 224.0.0.1 and you will therefore be listening to all multicasts. + * One nv conference running over that Ethernet and you can give up. + * + */ + +#define DRV_NAME "3c501" +#define DRV_VERSION "2002/10/09" + + +static const char version[] = + DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@redhat.com).\n"; + +/* + * Braindamage remaining: + * The 3c501 board. + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include /* for CONFIG_IP_MULTICAST */ +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include "3c501.h" + +/* + * The boilerplate probe code. + */ + +static int io=0x280; +static int irq=5; +static int mem_start; + +/** + * el1_probe: - probe for a 3c501 + * @dev: The device structure passed in to probe. + * + * This can be called from two places. The network layer will probe using + * a device structure passed in with the probe information completed. For a + * modular driver we use #init_module to fill in our own structure and probe + * for it. + * + * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to + * probe and failing to find anything. + */ + +struct net_device * __init el1_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + static unsigned ports[] = { 0x280, 0x300, 0}; + unsigned *port; + int err = 0; + + if (!dev) + return ERR_PTR(-ENOMEM); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + io = dev->base_addr; + irq = dev->irq; + mem_start = dev->mem_start & 7; + } + + SET_MODULE_OWNER(dev); + + if (io > 0x1ff) { /* Check a single specified location. */ + err = el1_probe1(dev, io); + } else if (io != 0) { + err = -ENXIO; /* Don't probe at all. */ + } else { + for (port = ports; *port && el1_probe1(dev, *port); port++) + ; + if (!*port) + err = -ENODEV; + } + if (err) + goto out; + err = register_netdev(dev); + if (err) + goto out1; + return dev; +out1: + release_region(dev->base_addr, EL1_IO_EXTENT); +out: + free_netdev(dev); + return ERR_PTR(err); +} + +/** + * el1_probe1: + * @dev: The device structure to use + * @ioaddr: An I/O address to probe at. + * + * The actual probe. This is iterated over by #el1_probe in order to + * check all the applicable device locations. + * + * Returns 0 for a success, in which case the device is activated, + * EAGAIN if the IRQ is in use by another driver, and ENODEV if the + * board cannot be found. + */ + +static int __init el1_probe1(struct net_device *dev, int ioaddr) +{ + struct net_local *lp; + const char *mname; /* Vendor name */ + unsigned char station_addr[6]; + int autoirq = 0; + int i; + + /* + * Reserve I/O resource for exclusive use by this driver + */ + + if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME)) + return -ENODEV; + + /* + * Read the station address PROM data from the special port. + */ + + for (i = 0; i < 6; i++) + { + outw(i, ioaddr + EL1_DATAPTR); + station_addr[i] = inb(ioaddr + EL1_SAPROM); + } + /* + * Check the first three octets of the S.A. for 3Com's prefix, or + * for the Sager NP943 prefix. + */ + + if (station_addr[0] == 0x02 && station_addr[1] == 0x60 + && station_addr[2] == 0x8c) + { + mname = "3c501"; + } else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 + && station_addr[2] == 0xC8) + { + mname = "NP943"; + } + else { + release_region(ioaddr, EL1_IO_EXTENT); + return -ENODEV; + } + + /* + * We auto-IRQ by shutting off the interrupt line and letting it float + * high. + */ + + dev->irq = irq; + + if (dev->irq < 2) + { + unsigned long irq_mask; + + irq_mask = probe_irq_on(); + inb(RX_STATUS); /* Clear pending interrupts. */ + inb(TX_STATUS); + outb(AX_LOOP + 1, AX_CMD); + + outb(0x00, AX_CMD); + + mdelay(20); + autoirq = probe_irq_off(irq_mask); + + if (autoirq == 0) + { + printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n", + mname, ioaddr); + release_region(ioaddr, EL1_IO_EXTENT); + return -EAGAIN; + } + } + + outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */ + dev->base_addr = ioaddr; + memcpy(dev->dev_addr, station_addr, ETH_ALEN); + + if (mem_start & 0xf) + el_debug = mem_start & 0x7; + if (autoirq) + dev->irq = autoirq; + + printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n", dev->name, mname, dev->base_addr, + autoirq ? "auto":"assigned ", dev->irq); + +#ifdef CONFIG_IP_MULTICAST + printk(KERN_WARNING "WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n"); +#endif + + if (el_debug) + printk(KERN_DEBUG "%s", version); + + memset(dev->priv, 0, sizeof(struct net_local)); + lp = netdev_priv(dev); + spin_lock_init(&lp->lock); + + /* + * The EL1-specific entries in the device structure. + */ + + dev->open = &el_open; + dev->hard_start_xmit = &el_start_xmit; + dev->tx_timeout = &el_timeout; + dev->watchdog_timeo = HZ; + dev->stop = &el1_close; + dev->get_stats = &el1_get_stats; + dev->set_multicast_list = &set_multicast_list; + dev->ethtool_ops = &netdev_ethtool_ops; + return 0; +} + +/** + * el1_open: + * @dev: device that is being opened + * + * When an ifconfig is issued which changes the device flags to include + * IFF_UP this function is called. It is only called when the change + * occurs, not when the interface remains up. #el1_close will be called + * when it goes down. + * + * Returns 0 for a successful open, or -EAGAIN if someone has run off + * with our interrupt line. + */ + +static int el_open(struct net_device *dev) +{ + int retval; + int ioaddr = dev->base_addr; + struct net_local *lp = netdev_priv(dev); + unsigned long flags; + + if (el_debug > 2) + printk(KERN_DEBUG "%s: Doing el_open()...", dev->name); + + if ((retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev))) + return retval; + + spin_lock_irqsave(&lp->lock, flags); + el_reset(dev); + spin_unlock_irqrestore(&lp->lock, flags); + + lp->txing = 0; /* Board in RX mode */ + outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ + netif_start_queue(dev); + return 0; +} + +/** + * el_timeout: + * @dev: The 3c501 card that has timed out + * + * Attempt to restart the board. This is basically a mixture of extreme + * violence and prayer + * + */ + +static void el_timeout(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + if (el_debug) + printk (KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n", + dev->name, inb(TX_STATUS), inb(AX_STATUS), inb(RX_STATUS)); + lp->stats.tx_errors++; + outb(TX_NORM, TX_CMD); + outb(RX_NORM, RX_CMD); + outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */ + outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ + lp->txing = 0; /* Ripped back in to RX */ + netif_wake_queue(dev); +} + + +/** + * el_start_xmit: + * @skb: The packet that is queued to be sent + * @dev: The 3c501 card we want to throw it down + * + * Attempt to send a packet to a 3c501 card. There are some interesting + * catches here because the 3c501 is an extremely old and therefore + * stupid piece of technology. + * + * If we are handling an interrupt on the other CPU we cannot load a packet + * as we may still be attempting to retrieve the last RX packet buffer. + * + * When a transmit times out we dump the card into control mode and just + * start again. It happens enough that it isnt worth logging. + * + * We avoid holding the spin locks when doing the packet load to the board. + * The device is very slow, and its DMA mode is even slower. If we held the + * lock while loading 1500 bytes onto the controller we would drop a lot of + * serial port characters. This requires we do extra locking, but we have + * no real choice. + */ + +static int el_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + unsigned long flags; + + /* + * Avoid incoming interrupts between us flipping txing and flipping + * mode as the driver assumes txing is a faithful indicator of card + * state + */ + + spin_lock_irqsave(&lp->lock, flags); + + /* + * Avoid timer-based retransmission conflicts. + */ + + netif_stop_queue(dev); + + do + { + int len = skb->len; + int pad = 0; + int gp_start; + unsigned char *buf = skb->data; + + if (len < ETH_ZLEN) + pad = ETH_ZLEN - len; + + gp_start = 0x800 - ( len + pad ); + + lp->tx_pkt_start = gp_start; + lp->collisions = 0; + + lp->stats.tx_bytes += skb->len; + + /* + * Command mode with status cleared should [in theory] + * mean no more interrupts can be pending on the card. + */ + + outb_p(AX_SYS, AX_CMD); + inb_p(RX_STATUS); + inb_p(TX_STATUS); + + lp->loading = 1; + lp->txing = 1; + + /* + * Turn interrupts back on while we spend a pleasant afternoon + * loading bytes into the board + */ + + spin_unlock_irqrestore(&lp->lock, flags); + + outw(0x00, RX_BUF_CLR); /* Set rx packet area to 0. */ + outw(gp_start, GP_LOW); /* aim - packet will be loaded into buffer start */ + outsb(DATAPORT,buf,len); /* load buffer (usual thing each byte increments the pointer) */ + if (pad) { + while(pad--) /* Zero fill buffer tail */ + outb(0, DATAPORT); + } + outw(gp_start, GP_LOW); /* the board reuses the same register */ + + if(lp->loading != 2) + { + outb(AX_XMIT, AX_CMD); /* fire ... Trigger xmit. */ + lp->loading=0; + dev->trans_start = jiffies; + if (el_debug > 2) + printk(KERN_DEBUG " queued xmit.\n"); + dev_kfree_skb (skb); + return 0; + } + /* A receive upset our load, despite our best efforts */ + if(el_debug>2) + printk(KERN_DEBUG "%s: burped during tx load.\n", dev->name); + spin_lock_irqsave(&lp->lock, flags); + } + while(1); + +} + +/** + * el_interrupt: + * @irq: Interrupt number + * @dev_id: The 3c501 that burped + * @regs: Register data (surplus to our requirements) + * + * Handle the ether interface interrupts. The 3c501 needs a lot more + * hand holding than most cards. In particular we get a transmit interrupt + * with a collision error because the board firmware isnt capable of rewinding + * its own transmit buffer pointers. It can however count to 16 for us. + * + * On the receive side the card is also very dumb. It has no buffering to + * speak of. We simply pull the packet out of its PIO buffer (which is slow) + * and queue it for the kernel. Then we reset the card for the next packet. + * + * We sometimes get suprise interrupts late both because the SMP IRQ delivery + * is message passing and because the card sometimes seems to deliver late. I + * think if it is part way through a receive and the mode is changed it carries + * on receiving and sends us an interrupt. We have to band aid all these cases + * to get a sensible 150kbytes/second performance. Even then you want a small + * TCP window. + */ + +static irqreturn_t el_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct net_local *lp; + int ioaddr; + int axsr; /* Aux. status reg. */ + + ioaddr = dev->base_addr; + lp = netdev_priv(dev); + + spin_lock(&lp->lock); + + /* + * What happened ? + */ + + axsr = inb(AX_STATUS); + + /* + * Log it + */ + + if (el_debug > 3) + printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x", dev->name, axsr); + + if(lp->loading==1 && !lp->txing) + printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n", + dev->name); + + if (lp->txing) + { + + /* + * Board in transmit mode. May be loading. If we are + * loading we shouldn't have got this. + */ + + int txsr = inb(TX_STATUS); + + if(lp->loading==1) + { + if(el_debug > 2) + { + printk(KERN_DEBUG "%s: Interrupt while loading [", dev->name); + printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x]\n", txsr, inw(GP_LOW),inw(RX_LOW)); + } + lp->loading=2; /* Force a reload */ + spin_unlock(&lp->lock); + goto out; + } + + if (el_debug > 6) + printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x", txsr, inw(GP_LOW),inw(RX_LOW)); + + if ((axsr & 0x80) && (txsr & TX_READY) == 0) + { + /* + * FIXME: is there a logic to whether to keep on trying or + * reset immediately ? + */ + if(el_debug>1) + printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x" + " gp=%03x rp=%03x.\n", dev->name, txsr, axsr, + inw(ioaddr + EL1_DATAPTR), inw(ioaddr + EL1_RXPTR)); + lp->txing = 0; + netif_wake_queue(dev); + } + else if (txsr & TX_16COLLISIONS) + { + /* + * Timed out + */ + if (el_debug) + printk (KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n",dev->name); + outb(AX_SYS, AX_CMD); + lp->txing = 0; + lp->stats.tx_aborted_errors++; + netif_wake_queue(dev); + } + else if (txsr & TX_COLLISION) + { + /* + * Retrigger xmit. + */ + + if (el_debug > 6) + printk(KERN_DEBUG " retransmitting after a collision.\n"); + /* + * Poor little chip can't reset its own start pointer + */ + + outb(AX_SYS, AX_CMD); + outw(lp->tx_pkt_start, GP_LOW); + outb(AX_XMIT, AX_CMD); + lp->stats.collisions++; + spin_unlock(&lp->lock); + goto out; + } + else + { + /* + * It worked.. we will now fall through and receive + */ + lp->stats.tx_packets++; + if (el_debug > 6) + printk(KERN_DEBUG " Tx succeeded %s\n", + (txsr & TX_RDY) ? "." : "but tx is busy!"); + /* + * This is safe the interrupt is atomic WRT itself. + */ + + lp->txing = 0; + netif_wake_queue(dev); /* In case more to transmit */ + } + } + else + { + /* + * In receive mode. + */ + + int rxsr = inb(RX_STATUS); + if (el_debug > 5) + printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS),inw(RX_LOW)); + /* + * Just reading rx_status fixes most errors. + */ + if (rxsr & RX_MISSED) + lp->stats.rx_missed_errors++; + else if (rxsr & RX_RUNT) + { /* Handled to avoid board lock-up. */ + lp->stats.rx_length_errors++; + if (el_debug > 5) + printk(KERN_DEBUG " runt.\n"); + } + else if (rxsr & RX_GOOD) + { + /* + * Receive worked. + */ + el_receive(dev); + } + else + { + /* + * Nothing? Something is broken! + */ + if (el_debug > 2) + printk(KERN_DEBUG "%s: No packet seen, rxsr=%02x **resetting 3c501***\n", + dev->name, rxsr); + el_reset(dev); + } + if (el_debug > 3) + printk(KERN_DEBUG ".\n"); + } + + /* + * Move into receive mode + */ + + outb(AX_RX, AX_CMD); + outw(0x00, RX_BUF_CLR); + inb(RX_STATUS); /* Be certain that interrupts are cleared. */ + inb(TX_STATUS); + spin_unlock(&lp->lock); +out: + return IRQ_HANDLED; +} + + +/** + * el_receive: + * @dev: Device to pull the packets from + * + * We have a good packet. Well, not really "good", just mostly not broken. + * We must check everything to see if it is good. In particular we occasionally + * get wild packet sizes from the card. If the packet seems sane we PIO it + * off the card and queue it for the protocol layers. + */ + +static void el_receive(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int pkt_len; + struct sk_buff *skb; + + pkt_len = inw(RX_LOW); + + if (el_debug > 4) + printk(KERN_DEBUG " el_receive %d.\n", pkt_len); + + if ((pkt_len < 60) || (pkt_len > 1536)) + { + if (el_debug) + printk(KERN_DEBUG "%s: bogus packet, length=%d\n", dev->name, pkt_len); + lp->stats.rx_over_errors++; + return; + } + + /* + * Command mode so we can empty the buffer + */ + + outb(AX_SYS, AX_CMD); + skb = dev_alloc_skb(pkt_len+2); + + /* + * Start of frame + */ + + outw(0x00, GP_LOW); + if (skb == NULL) + { + printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n", dev->name); + lp->stats.rx_dropped++; + return; + } + else + { + skb_reserve(skb,2); /* Force 16 byte alignment */ + skb->dev = dev; + /* + * The read increments through the bytes. The interrupt + * handler will fix the pointer when it returns to + * receive mode. + */ + insb(DATAPORT, skb_put(skb,pkt_len), pkt_len); + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes+=pkt_len; + } + return; +} + +/** + * el_reset: Reset a 3c501 card + * @dev: The 3c501 card about to get zapped + * + * Even resetting a 3c501 isnt simple. When you activate reset it loses all + * its configuration. You must hold the lock when doing this. The function + * cannot take the lock itself as it is callable from the irq handler. + */ + +static void el_reset(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + if (el_debug> 2) + printk(KERN_INFO "3c501 reset..."); + outb(AX_RESET, AX_CMD); /* Reset the chip */ + outb(AX_LOOP, AX_CMD); /* Aux control, irq and loopback enabled */ + { + int i; + for (i = 0; i < 6; i++) /* Set the station address. */ + outb(dev->dev_addr[i], ioaddr + i); + } + + outw(0, RX_BUF_CLR); /* Set rx packet area to 0. */ + outb(TX_NORM, TX_CMD); /* tx irq on done, collision */ + outb(RX_NORM, RX_CMD); /* Set Rx commands. */ + inb(RX_STATUS); /* Clear status. */ + inb(TX_STATUS); + lp->txing = 0; +} + +/** + * el1_close: + * @dev: 3c501 card to shut down + * + * Close a 3c501 card. The IFF_UP flag has been cleared by the user via + * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued, + * and then disable the interrupts. Finally we reset the chip. The effects + * of the rest will be cleaned up by #el1_open. Always returns 0 indicating + * a success. + */ + +static int el1_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + if (el_debug > 2) + printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n", dev->name, ioaddr); + + netif_stop_queue(dev); + + /* + * Free and disable the IRQ. + */ + + free_irq(dev->irq, dev); + outb(AX_RESET, AX_CMD); /* Reset the chip */ + + return 0; +} + +/** + * el1_get_stats: + * @dev: The card to get the statistics for + * + * In smarter devices this function is needed to pull statistics off the + * board itself. The 3c501 has no hardware statistics. We maintain them all + * so they are by definition always up to date. + * + * Returns the statistics for the card from the card private data + */ + +static struct net_device_stats *el1_get_stats(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + return &lp->stats; +} + +/** + * set_multicast_list: + * @dev: The device to adjust + * + * Set or clear the multicast filter for this adaptor to use the best-effort + * filtering supported. The 3c501 supports only three modes of filtering. + * It always receives broadcasts and packets for itself. You can choose to + * optionally receive all packets, or all multicast packets on top of this. + */ + +static void set_multicast_list(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + if(dev->flags&IFF_PROMISC) + { + outb(RX_PROM, RX_CMD); + inb(RX_STATUS); + } + else if (dev->mc_list || dev->flags&IFF_ALLMULTI) + { + outb(RX_MULT, RX_CMD); /* Multicast or all multicast is the same */ + inb(RX_STATUS); /* Clear status. */ + } + else + { + outb(RX_NORM, RX_CMD); + inb(RX_STATUS); + } +} + + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 level) +{ + debug = level; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, +}; + +#ifdef MODULE + +static struct net_device *dev_3c501; + +module_param(io, int, 0); +module_param(irq, int, 0); +MODULE_PARM_DESC(io, "EtherLink I/O base address"); +MODULE_PARM_DESC(irq, "EtherLink IRQ number"); + +/** + * init_module: + * + * When the driver is loaded as a module this function is called. We fake up + * a device structure with the base I/O and interrupt set as if it were being + * called from Space.c. This minimises the extra code that would otherwise + * be required. + * + * Returns 0 for success or -EIO if a card is not found. Returning an error + * here also causes the module to be unloaded + */ + +int init_module(void) +{ + dev_3c501 = el1_probe(-1); + if (IS_ERR(dev_3c501)) + return PTR_ERR(dev_3c501); + return 0; +} + +/** + * cleanup_module: + * + * The module is being unloaded. We unhook our network device from the system + * and then free up the resources we took when the card was found. + */ + +void cleanup_module(void) +{ + struct net_device *dev = dev_3c501; + unregister_netdev(dev); + release_region(dev->base_addr, EL1_IO_EXTENT); + free_netdev(dev); +} + +#endif /* MODULE */ + +MODULE_AUTHOR("Donald Becker, Alan Cox"); +MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card"); +MODULE_LICENSE("GPL"); + -- cgit v1.2.3