From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/atp.h | 259 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 259 insertions(+) create mode 100644 drivers/net/atp.h (limited to 'drivers/net/atp.h') diff --git a/drivers/net/atp.h b/drivers/net/atp.h new file mode 100644 index 00000000000..0edc642c2c2 --- /dev/null +++ b/drivers/net/atp.h @@ -0,0 +1,259 @@ +/* Linux header file for the ATP pocket ethernet adapter. */ +/* v1.09 8/9/2000 becker@scyld.com. */ + +#include +#include + +/* The header prepended to received packets. */ +struct rx_header { + ushort pad; /* Pad. */ + ushort rx_count; + ushort rx_status; /* Unknown bit assignments :-<. */ + ushort cur_addr; /* Apparently the current buffer address(?) */ +}; + +#define PAR_DATA 0 +#define PAR_STATUS 1 +#define PAR_CONTROL 2 + +enum chip_type { RTL8002, RTL8012 }; + +#define Ctrl_LNibRead 0x08 /* LP_PSELECP */ +#define Ctrl_HNibRead 0 +#define Ctrl_LNibWrite 0x08 /* LP_PSELECP */ +#define Ctrl_HNibWrite 0 +#define Ctrl_SelData 0x04 /* LP_PINITP */ +#define Ctrl_IRQEN 0x10 /* LP_PINTEN */ + +#define EOW 0xE0 +#define EOC 0xE0 +#define WrAddr 0x40 /* Set address of EPLC read, write register. */ +#define RdAddr 0xC0 +#define HNib 0x10 + +enum page0_regs +{ + /* The first six registers hold the ethernet physical station address. */ + PAR0 = 0, PAR1 = 1, PAR2 = 2, PAR3 = 3, PAR4 = 4, PAR5 = 5, + TxCNT0 = 6, TxCNT1 = 7, /* The transmit byte count. */ + TxSTAT = 8, RxSTAT = 9, /* Tx and Rx status. */ + ISR = 10, IMR = 11, /* Interrupt status and mask. */ + CMR1 = 12, /* Command register 1. */ + CMR2 = 13, /* Command register 2. */ + MODSEL = 14, /* Mode select register. */ + MAR = 14, /* Memory address register (?). */ + CMR2_h = 0x1d, }; + +enum eepage_regs +{ PROM_CMD = 6, PROM_DATA = 7 }; /* Note that PROM_CMD is in the "high" bits. */ + + +#define ISR_TxOK 0x01 +#define ISR_RxOK 0x04 +#define ISR_TxErr 0x02 +#define ISRh_RxErr 0x11 /* ISR, high nibble */ + +#define CMR1h_MUX 0x08 /* Select printer multiplexor on 8012. */ +#define CMR1h_RESET 0x04 /* Reset. */ +#define CMR1h_RxENABLE 0x02 /* Rx unit enable. */ +#define CMR1h_TxENABLE 0x01 /* Tx unit enable. */ +#define CMR1h_TxRxOFF 0x00 +#define CMR1_ReXmit 0x08 /* Trigger a retransmit. */ +#define CMR1_Xmit 0x04 /* Trigger a transmit. */ +#define CMR1_IRQ 0x02 /* Interrupt active. */ +#define CMR1_BufEnb 0x01 /* Enable the buffer(?). */ +#define CMR1_NextPkt 0x01 /* Enable the buffer(?). */ + +#define CMR2_NULL 8 +#define CMR2_IRQOUT 9 +#define CMR2_RAMTEST 10 +#define CMR2_EEPROM 12 /* Set to page 1, for reading the EEPROM. */ + +#define CMR2h_OFF 0 /* No accept mode. */ +#define CMR2h_Physical 1 /* Accept a physical address match only. */ +#define CMR2h_Normal 2 /* Accept physical and broadcast address. */ +#define CMR2h_PROMISC 3 /* Promiscuous mode. */ + +/* An inline function used below: it differs from inb() by explicitly return an unsigned + char, saving a truncation. */ +static inline unsigned char inbyte(unsigned short port) +{ + unsigned char _v; + __asm__ __volatile__ ("inb %w1,%b0" :"=a" (_v):"d" (port)); + return _v; +} + +/* Read register OFFSET. + This command should always be terminated with read_end(). */ +static inline unsigned char read_nibble(short port, unsigned char offset) +{ + unsigned char retval; + outb(EOC+offset, port + PAR_DATA); + outb(RdAddr+offset, port + PAR_DATA); + inbyte(port + PAR_STATUS); /* Settling time delay */ + retval = inbyte(port + PAR_STATUS); + outb(EOC+offset, port + PAR_DATA); + + return retval; +} + +/* Functions for bulk data read. The interrupt line is always disabled. */ +/* Get a byte using read mode 0, reading data from the control lines. */ +static inline unsigned char read_byte_mode0(short ioaddr) +{ + unsigned char low_nib; + + outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); + inbyte(ioaddr + PAR_STATUS); + low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f; + outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL); + inbyte(ioaddr + PAR_STATUS); /* Settling time delay -- needed! */ + inbyte(ioaddr + PAR_STATUS); /* Settling time delay -- needed! */ + return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0); +} + +/* The same as read_byte_mode0(), but does multiple inb()s for stability. */ +static inline unsigned char read_byte_mode2(short ioaddr) +{ + unsigned char low_nib; + + outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); + inbyte(ioaddr + PAR_STATUS); + low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f; + outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL); + inbyte(ioaddr + PAR_STATUS); /* Settling time delay -- needed! */ + return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0); +} + +/* Read a byte through the data register. */ +static inline unsigned char read_byte_mode4(short ioaddr) +{ + unsigned char low_nib; + + outb(RdAddr | MAR, ioaddr + PAR_DATA); + low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f; + outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA); + return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0); +} + +/* Read a byte through the data register, double reading to allow settling. */ +static inline unsigned char read_byte_mode6(short ioaddr) +{ + unsigned char low_nib; + + outb(RdAddr | MAR, ioaddr + PAR_DATA); + inbyte(ioaddr + PAR_STATUS); + low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f; + outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA); + inbyte(ioaddr + PAR_STATUS); + return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0); +} + +static inline void +write_reg(short port, unsigned char reg, unsigned char value) +{ + unsigned char outval; + outb(EOC | reg, port + PAR_DATA); + outval = WrAddr | reg; + outb(outval, port + PAR_DATA); + outb(outval, port + PAR_DATA); /* Double write for PS/2. */ + + outval &= 0xf0; + outval |= value; + outb(outval, port + PAR_DATA); + outval &= 0x1f; + outb(outval, port + PAR_DATA); + outb(outval, port + PAR_DATA); + + outb(EOC | outval, port + PAR_DATA); +} + +static inline void +write_reg_high(short port, unsigned char reg, unsigned char value) +{ + unsigned char outval = EOC | HNib | reg; + + outb(outval, port + PAR_DATA); + outval &= WrAddr | HNib | 0x0f; + outb(outval, port + PAR_DATA); + outb(outval, port + PAR_DATA); /* Double write for PS/2. */ + + outval = WrAddr | HNib | value; + outb(outval, port + PAR_DATA); + outval &= HNib | 0x0f; /* HNib | value */ + outb(outval, port + PAR_DATA); + outb(outval, port + PAR_DATA); + + outb(EOC | HNib | outval, port + PAR_DATA); +} + +/* Write a byte out using nibble mode. The low nibble is written first. */ +static inline void +write_reg_byte(short port, unsigned char reg, unsigned char value) +{ + unsigned char outval; + outb(EOC | reg, port + PAR_DATA); /* Reset the address register. */ + outval = WrAddr | reg; + outb(outval, port + PAR_DATA); + outb(outval, port + PAR_DATA); /* Double write for PS/2. */ + + outb((outval & 0xf0) | (value & 0x0f), port + PAR_DATA); + outb(value & 0x0f, port + PAR_DATA); + value >>= 4; + outb(value, port + PAR_DATA); + outb(0x10 | value, port + PAR_DATA); + outb(0x10 | value, port + PAR_DATA); + + outb(EOC | value, port + PAR_DATA); /* Reset the address register. */ +} + +/* + * Bulk data writes to the packet buffer. The interrupt line remains enabled. + * The first, faster method uses only the dataport (data modes 0, 2 & 4). + * The second (backup) method uses data and control regs (modes 1, 3 & 5). + * It should only be needed when there is skew between the individual data + * lines. + */ +static inline void write_byte_mode0(short ioaddr, unsigned char value) +{ + outb(value & 0x0f, ioaddr + PAR_DATA); + outb((value>>4) | 0x10, ioaddr + PAR_DATA); +} + +static inline void write_byte_mode1(short ioaddr, unsigned char value) +{ + outb(value & 0x0f, ioaddr + PAR_DATA); + outb(Ctrl_IRQEN | Ctrl_LNibWrite, ioaddr + PAR_CONTROL); + outb((value>>4) | 0x10, ioaddr + PAR_DATA); + outb(Ctrl_IRQEN | Ctrl_HNibWrite, ioaddr + PAR_CONTROL); +} + +/* Write 16bit VALUE to the packet buffer: the same as above just doubled. */ +static inline void write_word_mode0(short ioaddr, unsigned short value) +{ + outb(value & 0x0f, ioaddr + PAR_DATA); + value >>= 4; + outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA); + value >>= 4; + outb(value & 0x0f, ioaddr + PAR_DATA); + value >>= 4; + outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA); +} + +/* EEPROM_Ctrl bits. */ +#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */ +#define EE_CS 0x02 /* EEPROM chip select. */ +#define EE_CLK_HIGH 0x12 +#define EE_CLK_LOW 0x16 +#define EE_DATA_WRITE 0x01 /* EEPROM chip data in. */ +#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ + +/* Delay between EEPROM clock transitions. */ +#define eeprom_delay(ticks) \ +do { int _i = 40; while (--_i > 0) { __SLOW_DOWN_IO; }} while (0) + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_WRITE_CMD(offset) (((5 << 6) + (offset)) << 17) +#define EE_READ(offset) (((6 << 6) + (offset)) << 17) +#define EE_ERASE(offset) (((7 << 6) + (offset)) << 17) +#define EE_CMD_SIZE 27 /* The command+address+data size. */ -- cgit v1.2.3