From ad68076e07fa01bd0c98278a959d0fd2bb26f1ac Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 28 Mar 2008 09:15:03 -0700 Subject: e1000e: reformat comment blocks, cosmetic changes only Adjusting the comment blocks here to be code-style compliant. no code changes. Changed some copyright dates to 2008. Indentation fixes. Signed-off-by: Bruce Allan Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/ich8lan.c | 262 ++++++++++++++++++++++++++----------------- 1 file changed, 158 insertions(+), 104 deletions(-) (limited to 'drivers/net/e1000e/ich8lan.c') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 0ae39550768..84401564811 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -243,8 +243,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) u32 sector_end_addr; u16 i; - /* Can't read flash registers if the register set isn't mapped. - */ + /* Can't read flash registers if the register set isn't mapped. */ if (!hw->flash_address) { hw_dbg(hw, "ERROR: Flash registers not mapped\n"); return -E1000_ERR_CONFIG; @@ -254,17 +253,21 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) gfpreg = er32flash(ICH_FLASH_GFPREG); - /* sector_X_addr is a "sector"-aligned address (4096 bytes) + /* + * sector_X_addr is a "sector"-aligned address (4096 bytes) * Add 1 to sector_end_addr since this sector is included in - * the overall size. */ + * the overall size. + */ sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; /* flash_base_addr is byte-aligned */ nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; - /* find total size of the NVM, then cut in half since the total - * size represents two separate NVM banks. */ + /* + * find total size of the NVM, then cut in half since the total + * size represents two separate NVM banks. + */ nvm->flash_bank_size = (sector_end_addr - sector_base_addr) << FLASH_SECTOR_ADDR_SHIFT; nvm->flash_bank_size /= 2; @@ -496,7 +499,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Initialize the PHY from the NVM on ICH platforms. This + /* + * Initialize the PHY from the NVM on ICH platforms. This * is needed due to an issue where the NVM configuration is * not properly autoloaded after power transitions. * Therefore, after each PHY reset, we will load the @@ -523,7 +527,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) udelay(100); } while ((!data) && --loop); - /* If basic configuration is incomplete before the above loop + /* + * If basic configuration is incomplete before the above loop * count reaches 0, loading the configuration from NVM will * leave the PHY in a bad state possibly resulting in no link. */ @@ -536,8 +541,10 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) data &= ~E1000_STATUS_LAN_INIT_DONE; ew32(STATUS, data); - /* Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration */ + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ data = er32(EXTCNF_CTRL); if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) return 0; @@ -551,8 +558,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - /* Configure LCD from extended configuration - * region. */ + /* Configure LCD from extended configuration region. */ /* cnf_base_addr is in DWORD */ word_addr = (u16)(cnf_base_addr << 1); @@ -681,8 +687,8 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 phy_data, offset, mask; - /* Polarity is determined based on the reversal feature - * being enabled. + /* + * Polarity is determined based on the reversal feature being enabled. */ if (phy->polarity_correction) { offset = IFE_PHY_EXTENDED_STATUS_CONTROL; @@ -731,8 +737,10 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on LPLU before accessing - * any PHY registers */ + /* + * Call gig speed drop workaround on LPLU before accessing + * any PHY registers + */ if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3)) e1000e_gig_downshift_workaround_ich8lan(hw); @@ -747,30 +755,32 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; ew32(PHY_CTRL, phy_ctrl); - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. */ + * SmartSpeed, so performance is maintained. + */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) return ret_val; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) return ret_val; } @@ -804,34 +814,32 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) if (!active) { phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; ew32(PHY_CTRL, phy_ctrl); - /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. */ + * SmartSpeed, so performance is maintained. + */ if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = e1e_rphy(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) return ret_val; data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) return ret_val; } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = e1e_rphy(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) return ret_val; } @@ -841,23 +849,21 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on LPLU before accessing - * any PHY registers */ + /* + * Call gig speed drop workaround on LPLU before accessing + * any PHY registers + */ if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3)) e1000e_gig_downshift_workaround_ich8lan(hw); /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = e1e_rphy(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1e_wphy(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); } return 0; @@ -944,7 +950,8 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); - /* Either we should have a hardware SPI cycle in progress + /* + * Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it * is 1 after hardware reset, which can then be used as an @@ -953,15 +960,19 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) */ if (hsfsts.hsf_status.flcinprog == 0) { - /* There is no cycle running at present, - * so we can start a cycle */ - /* Begin by setting Flash Cycle Done. */ + /* + * There is no cycle running at present, + * so we can start a cycle + * Begin by setting Flash Cycle Done. + */ hsfsts.hsf_status.flcdone = 1; ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); ret_val = 0; } else { - /* otherwise poll for sometime so the current - * cycle has a chance to end before giving up. */ + /* + * otherwise poll for sometime so the current + * cycle has a chance to end before giving up. + */ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { hsfsts.regval = __er16flash(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcinprog == 0) { @@ -971,8 +982,10 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) udelay(1); } if (ret_val == 0) { - /* Successful in waiting for previous cycle to timeout, - * now set the Flash Cycle Done. */ + /* + * Successful in waiting for previous cycle to timeout, + * now set the Flash Cycle Done. + */ hsfsts.hsf_status.flcdone = 1; ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); } else { @@ -1077,10 +1090,12 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ret_val = e1000_flash_cycle_ich8lan(hw, ICH_FLASH_READ_COMMAND_TIMEOUT); - /* Check if FCERR is set to 1, if set to 1, clear it + /* + * Check if FCERR is set to 1, if set to 1, clear it * and try the whole sequence a few more times, else * read in (shift in) the Flash Data0, the order is - * least significant byte first msb to lsb */ + * least significant byte first msb to lsb + */ if (ret_val == 0) { flash_data = er32flash(ICH_FLASH_FDATA0); if (size == 1) { @@ -1090,7 +1105,8 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, } break; } else { - /* If we've gotten here, then things are probably + /* + * If we've gotten here, then things are probably * completely hosed, but if the error condition is * detected, it won't hurt to give it another try... * ICH_FLASH_CYCLE_REPEAT_COUNT times. @@ -1168,18 +1184,20 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) ret_val = e1000e_update_nvm_checksum_generic(hw); if (ret_val) - return ret_val;; + return ret_val; if (nvm->type != e1000_nvm_flash_sw) - return ret_val;; + return ret_val; ret_val = e1000_acquire_swflag_ich8lan(hw); if (ret_val) - return ret_val;; + return ret_val; - /* We're writing to the opposite bank so if we're on bank 1, + /* + * We're writing to the opposite bank so if we're on bank 1, * write to bank 0 etc. We also need to erase the segment that - * is going to be written */ + * is going to be written + */ if (!(er32(EECD) & E1000_EECD_SEC1VAL)) { new_bank_offset = nvm->flash_bank_size; old_bank_offset = 0; @@ -1191,9 +1209,11 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) } for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { - /* Determine whether to write the value stored + /* + * Determine whether to write the value stored * in the other NVM bank or a modified value stored - * in the shadow RAM */ + * in the shadow RAM + */ if (dev_spec->shadow_ram[i].modified) { data = dev_spec->shadow_ram[i].value; } else { @@ -1202,12 +1222,14 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) &data); } - /* If the word is 0x13, then make sure the signature bits + /* + * If the word is 0x13, then make sure the signature bits * (15:14) are 11b until the commit has completed. * This will allow us to write 10b which indicates the * signature is valid. We want to do this after the write * has completed so that we don't mark the segment valid - * while the write is still in progress */ + * while the write is still in progress + */ if (i == E1000_ICH_NVM_SIG_WORD) data |= E1000_ICH_NVM_SIG_MASK; @@ -1230,18 +1252,22 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) break; } - /* Don't bother writing the segment valid bits if sector - * programming failed. */ + /* + * Don't bother writing the segment valid bits if sector + * programming failed. + */ if (ret_val) { hw_dbg(hw, "Flash commit failed.\n"); e1000_release_swflag_ich8lan(hw); return ret_val; } - /* Finally validate the new segment by setting bit 15:14 + /* + * Finally validate the new segment by setting bit 15:14 * to 10b in word 0x13 , this can be done without an * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b */ + * and we need to change bit 14 to 0b + */ act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; e1000_read_flash_word_ich8lan(hw, act_offset, &data); data &= 0xBFFF; @@ -1253,10 +1279,12 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) return ret_val; } - /* And invalidate the previously valid segment by setting + /* + * And invalidate the previously valid segment by setting * its signature word (0x13) high_byte to 0b. This can be * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase */ + * to 1's. We can write 1's to 0's without an erase + */ act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { @@ -1272,7 +1300,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) e1000_release_swflag_ich8lan(hw); - /* Reload the EEPROM, or else modifications will not appear + /* + * Reload the EEPROM, or else modifications will not appear * until after the next adapter reset. */ e1000e_reload_nvm(hw); @@ -1294,7 +1323,8 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 data; - /* Read 0x19 and check bit 6. If this bit is 0, the checksum + /* + * Read 0x19 and check bit 6. If this bit is 0, the checksum * needs to be fixed. This bit is an indication that the NVM * was prepared by OEM software and did not calculate the * checksum...a likely scenario. @@ -1364,14 +1394,17 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ew32flash(ICH_FLASH_FDATA0, flash_data); - /* check if FCERR is set to 1 , if set to 1, clear it - * and try the whole sequence a few more times else done */ + /* + * check if FCERR is set to 1 , if set to 1, clear it + * and try the whole sequence a few more times else done + */ ret_val = e1000_flash_cycle_ich8lan(hw, ICH_FLASH_WRITE_COMMAND_TIMEOUT); if (!ret_val) break; - /* If we're here, then things are most likely + /* + * If we're here, then things are most likely * completely hosed, but if the error condition * is detected, it won't hurt to give it another * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. @@ -1462,9 +1495,10 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - /* Determine HW Sector size: Read BERASE bits of hw flash status - * register */ - /* 00: The Hw sector is 256 bytes, hence we need to erase 16 + /* + * Determine HW Sector size: Read BERASE bits of hw flash status + * register + * 00: The Hw sector is 256 bytes, hence we need to erase 16 * consecutive sectors. The start index for the nth Hw sector * can be calculated as = bank * 4096 + n * 256 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. @@ -1511,13 +1545,16 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) if (ret_val) return ret_val; - /* Write a value 11 (block Erase) in Flash - * Cycle field in hw flash control */ + /* + * Write a value 11 (block Erase) in Flash + * Cycle field in hw flash control + */ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); - /* Write the last 24 bits of an index within the + /* + * Write the last 24 bits of an index within the * block into Flash Linear address field in Flash * Address. */ @@ -1529,13 +1566,14 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) if (ret_val == 0) break; - /* Check if FCERR is set to 1. If 1, + /* + * Check if FCERR is set to 1. If 1, * clear it and try the whole sequence - * a few more times else Done */ + * a few more times else Done + */ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) - /* repeat for some time before - * giving up */ + /* repeat for some time before giving up */ continue; else if (hsfsts.hsf_status.flcdone == 0) return ret_val; @@ -1585,7 +1623,8 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) ret_val = e1000e_get_bus_info_pcie(hw); - /* ICH devices are "PCI Express"-ish. They have + /* + * ICH devices are "PCI Express"-ish. They have * a configuration space, but do not contain * PCI Express Capability registers, so bus width * must be hardcoded. @@ -1608,7 +1647,8 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) u32 ctrl, icr, kab; s32 ret_val; - /* Prevent the PCI-E bus from sticking if there is no TLP connection + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -1619,7 +1659,8 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "Masking off all interrupts\n"); ew32(IMC, 0xffffffff); - /* Disable the Transmit and Receive units. Then delay to allow + /* + * Disable the Transmit and Receive units. Then delay to allow * any pending transactions to complete before we hit the MAC * with the global reset. */ @@ -1640,7 +1681,8 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl = er32(CTRL); if (!e1000_check_reset_block(hw)) { - /* PHY HW reset requires MAC CORE reset at the same + /* + * PHY HW reset requires MAC CORE reset at the same * time to make sure the interface between MAC and the * external PHY is reset. */ @@ -1724,8 +1766,10 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) E1000_TXDCTL_MAX_TX_DESC_PREFETCH; ew32(TXDCTL1, txdctl); - /* ICH8 has opposite polarity of no_snoop bits. - * By default, we should use snoop behavior. */ + /* + * ICH8 has opposite polarity of no_snoop bits. + * By default, we should use snoop behavior. + */ if (mac->type == e1000_ich8lan) snoop = PCIE_ICH8_SNOOP_ALL; else @@ -1736,7 +1780,8 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) ctrl_ext |= E1000_CTRL_EXT_RO_DIS; ew32(CTRL_EXT, ctrl_ext); - /* Clear all of the statistics registers (clear on read). It is + /* + * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -1813,7 +1858,8 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) if (e1000_check_reset_block(hw)) return 0; - /* ICH parts do not have a word in the NVM to determine + /* + * ICH parts do not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. */ @@ -1853,9 +1899,11 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ew32(CTRL, ctrl); - /* Set the mac to wait the maximum time between each iteration + /* + * Set the mac to wait the maximum time between each iteration * and increase the max iterations when polling the phy; - * this fixes erroneous timeouts at 10Mbps. */ + * this fixes erroneous timeouts at 10Mbps. + */ ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); if (ret_val) return ret_val; @@ -1882,7 +1930,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) * @speed: pointer to store current link speed * @duplex: pointer to store the current link duplex * - * Calls the generic get_speed_and_duplex to retreive the current link + * Calls the generic get_speed_and_duplex to retrieve the current link * information and then calls the Kumeran lock loss workaround for links at * gigabit speeds. **/ @@ -1930,9 +1978,11 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) if (!dev_spec->kmrn_lock_loss_workaround_enabled) return 0; - /* Make sure link is up before proceeding. If not just return. + /* + * Make sure link is up before proceeding. If not just return. * Attempting this while link is negotiating fouled up link - * stability */ + * stability + */ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); if (!link) return 0; @@ -1961,8 +2011,10 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on Gig disable before accessing - * any PHY registers */ + /* + * Call gig speed drop workaround on Gig disable before accessing + * any PHY registers + */ e1000e_gig_downshift_workaround_ich8lan(hw); /* unable to acquire PCS lock */ @@ -1970,7 +2022,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) } /** - * e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state + * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state * @hw: pointer to the HW structure * @state: boolean value used to set the current Kumeran workaround state * @@ -2017,8 +2069,10 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, reg); - /* Call gig speed drop workaround on Gig disable before - * accessing any PHY registers */ + /* + * Call gig speed drop workaround on Gig disable before + * accessing any PHY registers + */ if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); -- cgit v1.2.3