From ad68076e07fa01bd0c98278a959d0fd2bb26f1ac Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 28 Mar 2008 09:15:03 -0700 Subject: e1000e: reformat comment blocks, cosmetic changes only Adjusting the comment blocks here to be code-style compliant. no code changes. Changed some copyright dates to 2008. Indentation fixes. Signed-off-by: Bruce Allan Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/param.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers/net/e1000e/param.c') diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index df266c32ac4..a66b92efcf8 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -30,7 +30,8 @@ #include "e1000.h" -/* This is the only thing that needs to be changed to adjust the +/* + * This is the only thing that needs to be changed to adjust the * maximum number of ports that the driver can manage. */ @@ -46,7 +47,8 @@ module_param(copybreak, uint, 0644); MODULE_PARM_DESC(copybreak, "Maximum size of packet that is copied to a new buffer on receive"); -/* All parameters are treated the same, as an integer array of values. +/* + * All parameters are treated the same, as an integer array of values. * This macro just reduces the need to repeat the same declaration code * over and over (plus this helps to avoid typo bugs). */ @@ -60,8 +62,9 @@ MODULE_PARM_DESC(copybreak, MODULE_PARM_DESC(X, desc); -/* Transmit Interrupt Delay in units of 1.024 microseconds - * Tx interrupt delay needs to typically be set to something non zero +/* + * Transmit Interrupt Delay in units of 1.024 microseconds + * Tx interrupt delay needs to typically be set to something non zero * * Valid Range: 0-65535 */ @@ -70,7 +73,8 @@ E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); #define MAX_TXDELAY 0xFFFF #define MIN_TXDELAY 0 -/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds +/* + * Transmit Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 */ @@ -79,8 +83,9 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); #define MAX_TXABSDELAY 0xFFFF #define MIN_TXABSDELAY 0 -/* Receive Interrupt Delay in units of 1.024 microseconds - * hardware will likely hang if you set this to anything but zero. +/* + * Receive Interrupt Delay in units of 1.024 microseconds + * hardware will likely hang if you set this to anything but zero. * * Valid Range: 0-65535 */ @@ -89,7 +94,8 @@ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); #define MAX_RXDELAY 0xFFFF #define MIN_RXDELAY 0 -/* Receive Absolute Interrupt Delay in units of 1.024 microseconds +/* + * Receive Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 */ @@ -98,7 +104,8 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); #define MAX_RXABSDELAY 0xFFFF #define MIN_RXABSDELAY 0 -/* Interrupt Throttle Rate (interrupts/sec) +/* + * Interrupt Throttle Rate (interrupts/sec) * * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) */ @@ -107,7 +114,8 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define MAX_ITR 100000 #define MIN_ITR 100 -/* Enable Smart Power Down of the PHY +/* + * Enable Smart Power Down of the PHY * * Valid Range: 0, 1 * @@ -115,7 +123,8 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); */ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); -/* Enable Kumeran Lock Loss workaround +/* + * Enable Kumeran Lock Loss workaround * * Valid Range: 0, 1 * -- cgit v1.2.3