From 23a2d1b233f535fc74f8dca66e488980b4db041b Mon Sep 17 00:00:00 2001 From: Dave Graham Date: Mon, 8 Jun 2009 14:28:17 +0000 Subject: e1000e: Fixes possible phy corrupton on 82571 designs. Phy corruption has been observed on 2-port 82571 adapters, and is root-caused to lack of synchronization between the 2 driver instances, which conflict when attempting to access the phy via the single MDIC register. A semaphore exists for this purpose, and is now used on these designs. Because PXE &/or EFI boot code (which we cannot expect to be built with this fix) may leave the inter-instance semaphore in an invalid initial state when the driver first loads, this fix also includes a one-time (per driver load) fix-up of the semaphore initial state. Signed-off-by: dave graham Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 86 ++++++++++++++++++++++++++++++++++++++++---- drivers/net/e1000e/defines.h | 2 ++ drivers/net/e1000e/hw.h | 2 ++ 3 files changed, 83 insertions(+), 7 deletions(-) (limited to 'drivers/net/e1000e') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index c4b3f4fe91a..b53b40ba88a 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -71,6 +71,7 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw); +static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); /** * e1000_init_phy_params_82571 - Init PHY func ptrs. @@ -212,6 +213,9 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_mac_info *mac = &hw->mac; struct e1000_mac_operations *func = &mac->ops; + u32 swsm = 0; + u32 swsm2 = 0; + bool force_clear_smbi = false; /* Set media type */ switch (adapter->pdev->device) { @@ -276,6 +280,50 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) break; } + /* + * Ensure that the inter-port SWSM.SMBI lock bit is clear before + * first NVM or PHY acess. This should be done for single-port + * devices, and for one port only on dual-port devices so that + * for those devices we can still use the SMBI lock to synchronize + * inter-port accesses to the PHY & NVM. + */ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + swsm2 = er32(SWSM2); + + if (!(swsm2 & E1000_SWSM2_LOCK)) { + /* Only do this for the first interface on this card */ + ew32(SWSM2, + swsm2 | E1000_SWSM2_LOCK); + force_clear_smbi = true; + } else + force_clear_smbi = false; + break; + default: + force_clear_smbi = true; + break; + } + + if (force_clear_smbi) { + /* Make sure SWSM.SMBI is clear */ + swsm = er32(SWSM); + if (swsm & E1000_SWSM_SMBI) { + /* This bit should not be set on a first interface, and + * indicates that the bootagent or EFI code has + * improperly left this bit enabled + */ + hw_dbg(hw, "Please update your 82571 Bootagent\n"); + } + ew32(SWSM, swsm & ~E1000_SWSM_SMBI); + } + + /* + * Initialze device specific counter of SMBI acquisition + * timeouts. + */ + hw->dev_spec.e82571.smb_counter = 0; + return 0; } @@ -413,11 +461,37 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) { u32 swsm; - s32 timeout = hw->nvm.word_size + 1; + s32 sw_timeout = hw->nvm.word_size + 1; + s32 fw_timeout = hw->nvm.word_size + 1; s32 i = 0; + /* + * If we have timedout 3 times on trying to acquire + * the inter-port SMBI semaphore, there is old code + * operating on the other port, and it is not + * releasing SMBI. Modify the number of times that + * we try for the semaphore to interwork with this + * older code. + */ + if (hw->dev_spec.e82571.smb_counter > 2) + sw_timeout = 1; + + /* Get the SW semaphore */ + while (i < sw_timeout) { + swsm = er32(SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + udelay(50); + i++; + } + + if (i == sw_timeout) { + hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + hw->dev_spec.e82571.smb_counter++; + } /* Get the FW semaphore. */ - for (i = 0; i < timeout; i++) { + for (i = 0; i < fw_timeout; i++) { swsm = er32(SWSM); ew32(SWSM, swsm | E1000_SWSM_SWESMBI); @@ -428,9 +502,9 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) udelay(50); } - if (i == timeout) { + if (i == fw_timeout) { /* Release semaphores */ - e1000e_put_hw_semaphore(hw); + e1000_put_hw_semaphore_82571(hw); hw_dbg(hw, "Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -449,9 +523,7 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw) u32 swsm; swsm = er32(SWSM); - - swsm &= ~E1000_SWSM_SWESMBI; - + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); ew32(SWSM, swsm); } diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 674a47e4303..8890c97e112 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -376,6 +376,8 @@ #define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ #define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ +#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ + /* Interrupt Cause Read */ #define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index fce3f0529e4..163c1c0cfee 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -214,6 +214,7 @@ enum e1e_registers { E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ + E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */ E1000_HICR = 0x08F00, /* Host Interface Control */ }; @@ -883,6 +884,7 @@ struct e1000_fc_info { struct e1000_dev_spec_82571 { bool laa_is_present; bool alt_mac_addr_is_present; + u32 smb_counter; }; struct e1000_shadow_ram { -- cgit v1.2.3