From 7a6ea550f2f7592742ac765e5a3b4b5d1461e0bd Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 26 Aug 2008 04:25:03 -0700 Subject: igb: force all queues to interrupt once every 2 seconds Set the EICS bit for each of the RX queues at least once every 2 seconds to prevent the rx queues from stalling. Signed-off-by: Jeff Kirsher Signed-off-by: Alexander Duyck Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net/igb/igb_main.c') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 8f66e15ec8d..465a810b670 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2290,7 +2290,9 @@ static void igb_watchdog_task(struct work_struct *work) struct igb_ring *tx_ring = adapter->tx_ring; struct e1000_mac_info *mac = &adapter->hw.mac; u32 link; + u32 eics = 0; s32 ret_val; + int i; if ((netif_carrier_ok(netdev)) && (rd32(E1000_STATUS) & E1000_STATUS_LU)) @@ -2392,7 +2394,13 @@ link_up: } /* Cause software interrupt to ensure rx ring is cleaned */ - wr32(E1000_ICS, E1000_ICS_RXDMT0); + if (adapter->msix_entries) { + for (i = 0; i < adapter->num_rx_queues; i++) + eics |= adapter->rx_ring[i].eims_value; + wr32(E1000_EICS, eics); + } else { + wr32(E1000_ICS, E1000_ICS_RXDMT0); + } /* Force detection of hung controller every watchdog period */ tx_ring->detect_tx_hung = true; -- cgit v1.2.3 From 34a20e89739e9ac1cb89bdf430b694d2c946ebff Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 26 Aug 2008 04:25:13 -0700 Subject: igb: fix setting the number of tx queues The real_num_tx_queues was not being set when in MSI-X only mode. This patch corrects that path so all interrupt types are correctly configured. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/igb/igb_main.c') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 465a810b670..e6eb13a303c 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -521,7 +521,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) adapter->msix_entries, numvecs); if (err == 0) - return; + goto out; igb_reset_interrupt_capability(adapter); @@ -531,7 +531,7 @@ msi_only: adapter->num_tx_queues = 1; if (!pci_enable_msi(adapter->pdev)) adapter->flags |= IGB_FLAG_HAS_MSI; - +out: /* Notify the stack of the (possibly) reduced Tx Queue count. */ adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; return; -- cgit v1.2.3 From 17fc7004a3f552b52274b6b2fbbebd7ff76dc1d5 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 8 Aug 2008 16:51:26 -0700 Subject: igb: remove 82576 quad adapter Disable support for device 8086:10E8. Currently the result of loading the driver with the device present causes system instability. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers/net/igb/igb_main.c') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index e6eb13a303c..634c4c9d87b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 }, @@ -1217,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; - case E1000_DEV_ID_82576_QUAD_COPPER: - /* if quad port adapter, disable WoL on all but port A */ - if (global_quad_port_a != 0) - adapter->eeprom_wol = 0; - else - adapter->flags |= IGB_FLAG_QUAD_PORT_A; - /* Reset for multiple quad port adapters */ - if (++global_quad_port_a == 4) - global_quad_port_a = 0; - break; } /* initialize the wol settings based on the eeprom settings */ -- cgit v1.2.3