From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/irda/ali-ircc.c | 2277 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2277 insertions(+) create mode 100644 drivers/net/irda/ali-ircc.c (limited to 'drivers/net/irda/ali-ircc.c') diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c new file mode 100644 index 00000000000..9bf34681d3d --- /dev/null +++ b/drivers/net/irda/ali-ircc.c @@ -0,0 +1,2277 @@ +/********************************************************************* + * + * Filename: ali-ircc.h + * Version: 0.5 + * Description: Driver for the ALI M1535D and M1543C FIR Controller + * Status: Experimental. + * Author: Benjamin Kong + * Created at: 2000/10/16 03:46PM + * Modified at: 2001/1/3 02:55PM + * Modified by: Benjamin Kong + * Modified at: 2003/11/6 and support for ALi south-bridge chipsets M1563 + * Modified by: Clear Zhang + * + * Copyright (c) 2000 Benjamin Kong + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + ********************************************************************/ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include + +#include "ali-ircc.h" + +#define CHIP_IO_EXTENT 8 +#define BROKEN_DONGLE_ID + +static char *driver_name = "ali-ircc"; + +/* Module parameters */ +static int qos_mtt_bits = 0x07; /* 1 ms or more */ + +/* Use BIOS settions by default, but user may supply module parameters */ +static unsigned int io[] = { ~0, ~0, ~0, ~0 }; +static unsigned int irq[] = { 0, 0, 0, 0 }; +static unsigned int dma[] = { 0, 0, 0, 0 }; + +static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info); +static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info); +static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info); + +/* These are the currently known ALi sourth-bridge chipsets, the only one difference + * is that M1543C doesn't support HP HDSL-3600 + */ +static ali_chip_t chips[] = +{ + { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 }, + { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 }, + { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 }, + { NULL } +}; + +/* Max 4 instances for now */ +static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL }; + +/* Dongle Types */ +static char *dongle_types[] = { + "TFDS6000", + "HP HSDL-3600", + "HP HSDL-1100", + "No dongle connected", +}; + +/* Some prototypes */ +static int ali_ircc_open(int i, chipio_t *info); + +static int ali_ircc_close(struct ali_ircc_cb *self); + +static int ali_ircc_setup(chipio_t *info); +static int ali_ircc_is_receiving(struct ali_ircc_cb *self); +static int ali_ircc_net_open(struct net_device *dev); +static int ali_ircc_net_close(struct net_device *dev); +static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data); +static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud); +static void ali_ircc_suspend(struct ali_ircc_cb *self); +static void ali_ircc_wakeup(struct ali_ircc_cb *self); +static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev); + +/* SIR function */ +static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self); +static void ali_ircc_sir_receive(struct ali_ircc_cb *self); +static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self); +static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len); +static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed); + +/* FIR function */ +static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev); +static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed); +static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self); +static int ali_ircc_dma_receive(struct ali_ircc_cb *self); +static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self); +static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self); +static void ali_ircc_dma_xmit(struct ali_ircc_cb *self); + +/* My Function */ +static int ali_ircc_read_dongle_id (int i, chipio_t *info); +static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed); + +/* ALi chip function */ +static void SIR2FIR(int iobase); +static void FIR2SIR(int iobase); +static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable); + +/* + * Function ali_ircc_init () + * + * Initialize chip. Find out whay kinds of chips we are dealing with + * and their configuation registers address + */ +static int __init ali_ircc_init(void) +{ + ali_chip_t *chip; + chipio_t info; + int ret = -ENODEV; + int cfg, cfg_base; + int reg, revision; + int i = 0; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + /* Probe for all the ALi chipsets we know about */ + for (chip= chips; chip->name; chip++, i++) + { + IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name); + + /* Try all config registers for this chip */ + for (cfg=0; cfg<2; cfg++) + { + cfg_base = chip->cfg[cfg]; + if (!cfg_base) + continue; + + memset(&info, 0, sizeof(chipio_t)); + info.cfg_base = cfg_base; + info.fir_base = io[i]; + info.dma = dma[i]; + info.irq = irq[i]; + + + /* Enter Configuration */ + outb(chip->entr1, cfg_base); + outb(chip->entr2, cfg_base); + + /* Select Logical Device 5 Registers (UART2) */ + outb(0x07, cfg_base); + outb(0x05, cfg_base+1); + + /* Read Chip Identification Register */ + outb(chip->cid_index, cfg_base); + reg = inb(cfg_base+1); + + if (reg == chip->cid_value) + { + IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base); + + outb(0x1F, cfg_base); + revision = inb(cfg_base+1); + IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__, + chip->name, revision); + + /* + * If the user supplies the base address, then + * we init the chip, if not we probe the values + * set by the BIOS + */ + if (io[i] < 2000) + { + chip->init(chip, &info); + } + else + { + chip->probe(chip, &info); + } + + if (ali_ircc_open(i, &info) == 0) + ret = 0; + i++; + } + else + { + IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base); + } + /* Exit configuration */ + outb(0xbb, cfg_base); + } + } + + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + return ret; +} + +/* + * Function ali_ircc_cleanup () + * + * Close all configured chips + * + */ +static void __exit ali_ircc_cleanup(void) +{ + int i; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + pm_unregister_all(ali_ircc_pmproc); + + for (i=0; i < 4; i++) { + if (dev_self[i]) + ali_ircc_close(dev_self[i]); + } + + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); +} + +/* + * Function ali_ircc_open (int i, chipio_t *inf) + * + * Open driver instance + * + */ +static int ali_ircc_open(int i, chipio_t *info) +{ + struct net_device *dev; + struct ali_ircc_cb *self; + struct pm_dev *pmdev; + int dongle_id; + int err; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + /* Set FIR FIFO and DMA Threshold */ + if ((ali_ircc_setup(info)) == -1) + return -1; + + dev = alloc_irdadev(sizeof(*self)); + if (dev == NULL) { + IRDA_ERROR("%s(), can't allocate memory for control block!\n", + __FUNCTION__); + return -ENOMEM; + } + + self = dev->priv; + self->netdev = dev; + spin_lock_init(&self->lock); + + /* Need to store self somewhere */ + dev_self[i] = self; + self->index = i; + + /* Initialize IO */ + self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign */ + self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base */ + self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same address */ + self->io.irq = info->irq; + self->io.fir_ext = CHIP_IO_EXTENT; + self->io.dma = info->dma; + self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */ + + /* Reserve the ioports that we need */ + if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) { + IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__, + self->io.fir_base); + err = -ENODEV; + goto err_out1; + } + + /* Initialize QoS for this device */ + irda_init_max_qos_capabilies(&self->qos); + + /* The only value we must override it the baudrate */ + self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| + IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM + + self->qos.min_turn_time.bits = qos_mtt_bits; + + irda_qos_bits_to_value(&self->qos); + + /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ + self->rx_buff.truesize = 14384; + self->tx_buff.truesize = 14384; + + /* Allocate memory if needed */ + self->rx_buff.head = + dma_alloc_coherent(NULL, self->rx_buff.truesize, + &self->rx_buff_dma, GFP_KERNEL); + if (self->rx_buff.head == NULL) { + err = -ENOMEM; + goto err_out2; + } + memset(self->rx_buff.head, 0, self->rx_buff.truesize); + + self->tx_buff.head = + dma_alloc_coherent(NULL, self->tx_buff.truesize, + &self->tx_buff_dma, GFP_KERNEL); + if (self->tx_buff.head == NULL) { + err = -ENOMEM; + goto err_out3; + } + memset(self->tx_buff.head, 0, self->tx_buff.truesize); + + self->rx_buff.in_frame = FALSE; + self->rx_buff.state = OUTSIDE_FRAME; + self->tx_buff.data = self->tx_buff.head; + self->rx_buff.data = self->rx_buff.head; + + /* Reset Tx queue info */ + self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; + self->tx_fifo.tail = self->tx_buff.head; + + + /* Keep track of module usage */ + SET_MODULE_OWNER(dev); + + /* Override the network functions we need to use */ + dev->hard_start_xmit = ali_ircc_sir_hard_xmit; + dev->open = ali_ircc_net_open; + dev->stop = ali_ircc_net_close; + dev->do_ioctl = ali_ircc_net_ioctl; + dev->get_stats = ali_ircc_net_get_stats; + + err = register_netdev(dev); + if (err) { + IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + goto err_out4; + } + IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); + + /* Check dongle id */ + dongle_id = ali_ircc_read_dongle_id(i, info); + IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__, driver_name, dongle_types[dongle_id]); + + self->io.dongle_id = dongle_id; + + pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, ali_ircc_pmproc); + if (pmdev) + pmdev->data = self; + + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + + return 0; + + err_out4: + dma_free_coherent(NULL, self->tx_buff.truesize, + self->tx_buff.head, self->tx_buff_dma); + err_out3: + dma_free_coherent(NULL, self->rx_buff.truesize, + self->rx_buff.head, self->rx_buff_dma); + err_out2: + release_region(self->io.fir_base, self->io.fir_ext); + err_out1: + dev_self[i] = NULL; + free_netdev(dev); + return err; +} + + +/* + * Function ali_ircc_close (self) + * + * Close driver instance + * + */ +static int __exit ali_ircc_close(struct ali_ircc_cb *self) +{ + int iobase; + + IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + IRDA_ASSERT(self != NULL, return -1;); + + iobase = self->io.fir_base; + + /* Remove netdevice */ + unregister_netdev(self->netdev); + + /* Release the PORT that this driver is using */ + IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base); + release_region(self->io.fir_base, self->io.fir_ext); + + if (self->tx_buff.head) + dma_free_coherent(NULL, self->tx_buff.truesize, + self->tx_buff.head, self->tx_buff_dma); + + if (self->rx_buff.head) + dma_free_coherent(NULL, self->rx_buff.truesize, + self->rx_buff.head, self->rx_buff_dma); + + dev_self[self->index] = NULL; + free_netdev(self->netdev); + + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + + return 0; +} + +/* + * Function ali_ircc_init_43 (chip, info) + * + * Initialize the ALi M1543 chip. + */ +static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info) +{ + /* All controller information like I/O address, DMA channel, IRQ + * are set by BIOS + */ + + return 0; +} + +/* + * Function ali_ircc_init_53 (chip, info) + * + * Initialize the ALi M1535 chip. + */ +static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info) +{ + /* All controller information like I/O address, DMA channel, IRQ + * are set by BIOS + */ + + return 0; +} + +/* + * Function ali_ircc_probe_53 (chip, info) + * + * Probes for the ALi M1535D or M1535 + */ +static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) +{ + int cfg_base = info->cfg_base; + int hi, low, reg; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + /* Enter Configuration */ + outb(chip->entr1, cfg_base); + outb(chip->entr2, cfg_base); + + /* Select Logical Device 5 Registers (UART2) */ + outb(0x07, cfg_base); + outb(0x05, cfg_base+1); + + /* Read address control register */ + outb(0x60, cfg_base); + hi = inb(cfg_base+1); + outb(0x61, cfg_base); + low = inb(cfg_base+1); + info->fir_base = (hi<<8) + low; + + info->sir_base = info->fir_base; + + IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base); + + /* Read IRQ control register */ + outb(0x70, cfg_base); + reg = inb(cfg_base+1); + info->irq = reg & 0x0f; + IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq); + + /* Read DMA channel */ + outb(0x74, cfg_base); + reg = inb(cfg_base+1); + info->dma = reg & 0x07; + + if(info->dma == 0x04) + IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__); + else + IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma); + + /* Read Enabled Status */ + outb(0x30, cfg_base); + reg = inb(cfg_base+1); + info->enabled = (reg & 0x80) && (reg & 0x01); + IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled); + + /* Read Power Status */ + outb(0x22, cfg_base); + reg = inb(cfg_base+1); + info->suspended = (reg & 0x20); + IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended); + + /* Exit configuration */ + outb(0xbb, cfg_base); + + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + + return 0; +} + +/* + * Function ali_ircc_setup (info) + * + * Set FIR FIFO and DMA Threshold + * Returns non-negative on success. + * + */ +static int ali_ircc_setup(chipio_t *info) +{ + unsigned char tmp; + int version; + int iobase = info->fir_base; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + /* Locking comments : + * Most operations here need to be protected. We are called before + * the device instance is created in ali_ircc_open(), therefore + * nobody can bother us - Jean II */ + + /* Switch to FIR space */ + SIR2FIR(iobase); + + /* Master Reset */ + outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM + + /* Read FIR ID Version Register */ + switch_bank(iobase, BANK3); + version = inb(iobase+FIR_ID_VR); + + /* Should be 0x00 in the M1535/M1535D */ + if(version != 0x00) + { + IRDA_ERROR("%s, Wrong chip version %02x\n", driver_name, version); + return -1; + } + + // IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name, info->cfg_base); + + /* Set FIR FIFO Threshold Register */ + switch_bank(iobase, BANK1); + outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR); + + /* Set FIR DMA Threshold Register */ + outb(RX_DMA_Threshold, iobase+FIR_DMA_TR); + + /* CRC enable */ + switch_bank(iobase, BANK2); + outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR); + + /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/ + + /* Switch to Bank 0 */ + switch_bank(iobase, BANK0); + + tmp = inb(iobase+FIR_LCR_B); + tmp &=~0x20; // disable SIP + tmp |= 0x80; // these two steps make RX mode + tmp &= 0xbf; + outb(tmp, iobase+FIR_LCR_B); + + /* Disable Interrupt */ + outb(0x00, iobase+FIR_IER); + + + /* Switch to SIR space */ + FIR2SIR(iobase); + + IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n", driver_name); + + /* Enable receive interrupts */ + // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM + // Turn on the interrupts in ali_ircc_net_open + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + + return 0; +} + +/* + * Function ali_ircc_read_dongle_id (int index, info) + * + * Try to read dongle indentification. This procedure needs to be executed + * once after power-on/reset. It also needs to be used whenever you suspect + * that the user may have plugged/unplugged the IrDA Dongle. + */ +static int ali_ircc_read_dongle_id (int i, chipio_t *info) +{ + int dongle_id, reg; + int cfg_base = info->cfg_base; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + /* Enter Configuration */ + outb(chips[i].entr1, cfg_base); + outb(chips[i].entr2, cfg_base); + + /* Select Logical Device 5 Registers (UART2) */ + outb(0x07, cfg_base); + outb(0x05, cfg_base+1); + + /* Read Dongle ID */ + outb(0xf0, cfg_base); + reg = inb(cfg_base+1); + dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01); + IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__, + dongle_id, dongle_types[dongle_id]); + + /* Exit configuration */ + outb(0xbb, cfg_base); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + + return dongle_id; +} + +/* + * Function ali_ircc_interrupt (irq, dev_id, regs) + * + * An interrupt from the chip has arrived. Time to do some work + * + */ +static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct ali_ircc_cb *self; + int ret; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + if (!dev) { + IRDA_WARNING("%s: irq %d for unknown device.\n", driver_name, irq); + return IRQ_NONE; + } + + self = (struct ali_ircc_cb *) dev->priv; + + spin_lock(&self->lock); + + /* Dispatch interrupt handler for the current speed */ + if (self->io.speed > 115200) + ret = ali_ircc_fir_interrupt(self); + else + ret = ali_ircc_sir_interrupt(self); + + spin_unlock(&self->lock); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + return ret; +} +/* + * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self) + * + * Handle MIR/FIR interrupt + * + */ +static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) +{ + __u8 eir, OldMessageCount; + int iobase, tmp; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + iobase = self->io.fir_base; + + switch_bank(iobase, BANK0); + self->InterruptID = inb(iobase+FIR_IIR); + self->BusStatus = inb(iobase+FIR_BSR); + + OldMessageCount = (self->LineStatus + 1) & 0x07; + self->LineStatus = inb(iobase+FIR_LSR); + //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM + eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ + + IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID); + IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus); + IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier); + IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir); + + /* Disable interrupts */ + SetCOMInterrupts(self, FALSE); + + /* Tx or Rx Interrupt */ + + if (eir & IIR_EOM) + { + if (self->io.direction == IO_XMIT) /* TX */ + { + IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__); + + if(ali_ircc_dma_xmit_complete(self)) + { + if (irda_device_txqueue_empty(self->netdev)) + { + /* Prepare for receive */ + ali_ircc_dma_receive(self); + self->ier = IER_EOM; + } + } + else + { + self->ier = IER_EOM; + } + + } + else /* RX */ + { + IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__); + + if(OldMessageCount > ((self->LineStatus+1) & 0x07)) + { + self->rcvFramesOverflow = TRUE; + IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__); + } + + if (ali_ircc_dma_receive_complete(self)) + { + IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__); + + self->ier = IER_EOM; + } + else + { + IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__); + + self->ier = IER_EOM | IER_TIMER; + } + + } + } + /* Timer Interrupt */ + else if (eir & IIR_TIMER) + { + if(OldMessageCount > ((self->LineStatus+1) & 0x07)) + { + self->rcvFramesOverflow = TRUE; + IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__); + } + /* Disable Timer */ + switch_bank(iobase, BANK1); + tmp = inb(iobase+FIR_CR); + outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR); + + /* Check if this is a Tx timer interrupt */ + if (self->io.direction == IO_XMIT) + { + ali_ircc_dma_xmit(self); + + /* Interrupt on EOM */ + self->ier = IER_EOM; + + } + else /* Rx */ + { + if(ali_ircc_dma_receive_complete(self)) + { + self->ier = IER_EOM; + } + else + { + self->ier = IER_EOM | IER_TIMER; + } + } + } + + /* Restore Interrupt */ + SetCOMInterrupts(self, TRUE); + + IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__); + return IRQ_RETVAL(eir); +} + +/* + * Function ali_ircc_sir_interrupt (irq, self, eir) + * + * Handle SIR interrupt + * + */ +static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) +{ + int iobase; + int iir, lsr; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + + iobase = self->io.sir_base; + + iir = inb(iobase+UART_IIR) & UART_IIR_ID; + if (iir) { + /* Clear interrupt */ + lsr = inb(iobase+UART_LSR); + + IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, + iir, lsr, iobase); + + switch (iir) + { + case UART_IIR_RLSI: + IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__); + break; + case UART_IIR_RDI: + /* Receive interrupt */ + ali_ircc_sir_receive(self); + break; + case UART_IIR_THRI: + if (lsr & UART_LSR_THRE) + { + /* Transmitter ready for data */ + ali_ircc_sir_write_wakeup(self); + } + break; + default: + IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir); + break; + } + + } + + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + + return IRQ_RETVAL(iir); +} + + +/* + * Function ali_ircc_sir_receive (self) + * + * Receive one frame from the infrared port + * + */ +static void ali_ircc_sir_receive(struct ali_ircc_cb *self) +{ + int boguscount = 0; + int iobase; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_ASSERT(self != NULL, return;); + + iobase = self->io.sir_base; + + /* + * Receive all characters in Rx FIFO, unwrap and unstuff them. + * async_unwrap_char will deliver all found frames + */ + do { + async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, + inb(iobase+UART_RX)); + + /* Make sure we don't stay here too long */ + if (boguscount++ > 32) { + IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__); + break; + } + } while (inb(iobase+UART_LSR) & UART_LSR_DR); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +/* + * Function ali_ircc_sir_write_wakeup (tty) + * + * Called by the driver when there's room for more data. If we have + * more packets to send, we send them here. + * + */ +static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) +{ + int actual = 0; + int iobase; + + IRDA_ASSERT(self != NULL, return;); + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + iobase = self->io.sir_base; + + /* Finished with frame? */ + if (self->tx_buff.len > 0) + { + /* Write data left in transmit buffer */ + actual = ali_ircc_sir_write(iobase, self->io.fifo_size, + self->tx_buff.data, self->tx_buff.len); + self->tx_buff.data += actual; + self->tx_buff.len -= actual; + } + else + { + if (self->new_speed) + { + /* We must wait until all data are gone */ + while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT)) + IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ ); + + IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed); + ali_ircc_change_speed(self, self->new_speed); + self->new_speed = 0; + + // benjamin 2000/11/10 06:32PM + if (self->io.speed > 115200) + { + IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ ); + + self->ier = IER_EOM; + // SetCOMInterrupts(self, TRUE); + return; + } + } + else + { + netif_wake_queue(self->netdev); + } + + self->stats.tx_packets++; + + /* Turn on receive interrupts */ + outb(UART_IER_RDI, iobase+UART_IER); + } + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) +{ + struct net_device *dev = self->netdev; + int iobase; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud); + + /* This function *must* be called with irq off and spin-lock. + * - Jean II */ + + iobase = self->io.fir_base; + + SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM + + /* Go to MIR, FIR Speed */ + if (baud > 115200) + { + + + ali_ircc_fir_change_speed(self, baud); + + /* Install FIR xmit handler*/ + dev->hard_start_xmit = ali_ircc_fir_hard_xmit; + + /* Enable Interuupt */ + self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM + + /* Be ready for incomming frames */ + ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete + } + /* Go to SIR Speed */ + else + { + ali_ircc_sir_change_speed(self, baud); + + /* Install SIR xmit handler*/ + dev->hard_start_xmit = ali_ircc_sir_hard_xmit; + } + + + SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM + + netif_wake_queue(self->netdev); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) +{ + + int iobase; + struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv; + struct net_device *dev; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_ASSERT(self != NULL, return;); + + dev = self->netdev; + iobase = self->io.fir_base; + + IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud); + + /* Come from SIR speed */ + if(self->io.speed <=115200) + { + SIR2FIR(iobase); + } + + /* Update accounting for new speed */ + self->io.speed = baud; + + // Set Dongle Speed mode + ali_ircc_change_dongle_speed(self, baud); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +/* + * Function ali_sir_change_speed (self, speed) + * + * Set speed of IrDA port to specified baudrate + * + */ +static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) +{ + struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv; + unsigned long flags; + int iobase; + int fcr; /* FIFO control reg */ + int lcr; /* Line control reg */ + int divisor; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed); + + IRDA_ASSERT(self != NULL, return;); + + iobase = self->io.sir_base; + + /* Come from MIR or FIR speed */ + if(self->io.speed >115200) + { + // Set Dongle Speed mode first + ali_ircc_change_dongle_speed(self, speed); + + FIR2SIR(iobase); + } + + // Clear Line and Auxiluary status registers 2000/11/24 11:47AM + + inb(iobase+UART_LSR); + inb(iobase+UART_SCR); + + /* Update accounting for new speed */ + self->io.speed = speed; + + spin_lock_irqsave(&self->lock, flags); + + divisor = 115200/speed; + + fcr = UART_FCR_ENABLE_FIFO; + + /* + * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and + * almost 1,7 ms at 19200 bps. At speeds above that we can just forget + * about this timeout since it will always be fast enough. + */ + if (self->io.speed < 38400) + fcr |= UART_FCR_TRIGGER_1; + else + fcr |= UART_FCR_TRIGGER_14; + + /* IrDA ports use 8N1 */ + lcr = UART_LCR_WLEN8; + + outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */ + outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */ + outb(divisor >> 8, iobase+UART_DLM); + outb(lcr, iobase+UART_LCR); /* Set 8N1 */ + outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ + + /* without this, the conection will be broken after come back from FIR speed, + but with this, the SIR connection is harder to established */ + outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); + + spin_unlock_irqrestore(&self->lock, flags); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) +{ + + struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv; + int iobase,dongle_id; + int tmp = 0; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */ + dongle_id = self->io.dongle_id; + + /* We are already locked, no need to do it again */ + + IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed); + + switch_bank(iobase, BANK2); + tmp = inb(iobase+FIR_IRDA_CR); + + /* IBM type dongle */ + if(dongle_id == 0) + { + if(speed == 4000000) + { + // __ __ + // SD/MODE __| |__ __ + // __ __ + // IRTX __ __| |__ + // T1 T2 T3 T4 T5 + + tmp &= ~IRDA_CR_HDLC; // HDLC=0 + tmp |= IRDA_CR_CRC; // CRC=1 + + switch_bank(iobase, BANK2); + outb(tmp, iobase+FIR_IRDA_CR); + + // T1 -> SD/MODE:0 IRTX:0 + tmp &= ~0x09; + tmp |= 0x02; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // T2 -> SD/MODE:1 IRTX:0 + tmp &= ~0x01; + tmp |= 0x0a; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // T3 -> SD/MODE:1 IRTX:1 + tmp |= 0x0b; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // T4 -> SD/MODE:0 IRTX:1 + tmp &= ~0x08; + tmp |= 0x03; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // T5 -> SD/MODE:0 IRTX:0 + tmp &= ~0x09; + tmp |= 0x02; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // reset -> Normal TX output Signal + outb(tmp & ~0x02, iobase+FIR_IRDA_CR); + } + else /* speed <=1152000 */ + { + // __ + // SD/MODE __| |__ + // + // IRTX ________ + // T1 T2 T3 + + /* MIR 115200, 57600 */ + if (speed==1152000) + { + tmp |= 0xA0; //HDLC=1, 1.152Mbps=1 + } + else + { + tmp &=~0x80; //HDLC 0.576Mbps + tmp |= 0x20; //HDLC=1, + } + + tmp |= IRDA_CR_CRC; // CRC=1 + + switch_bank(iobase, BANK2); + outb(tmp, iobase+FIR_IRDA_CR); + + /* MIR 115200, 57600 */ + + //switch_bank(iobase, BANK2); + // T1 -> SD/MODE:0 IRTX:0 + tmp &= ~0x09; + tmp |= 0x02; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // T2 -> SD/MODE:1 IRTX:0 + tmp &= ~0x01; + tmp |= 0x0a; + outb(tmp, iobase+FIR_IRDA_CR); + + // T3 -> SD/MODE:0 IRTX:0 + tmp &= ~0x09; + tmp |= 0x02; + outb(tmp, iobase+FIR_IRDA_CR); + udelay(2); + + // reset -> Normal TX output Signal + outb(tmp & ~0x02, iobase+FIR_IRDA_CR); + } + } + else if (dongle_id == 1) /* HP HDSL-3600 */ + { + switch(speed) + { + case 4000000: + tmp &= ~IRDA_CR_HDLC; // HDLC=0 + break; + + case 1152000: + tmp |= 0xA0; // HDLC=1, 1.152Mbps=1 + break; + + case 576000: + tmp &=~0x80; // HDLC 0.576Mbps + tmp |= 0x20; // HDLC=1, + break; + } + + tmp |= IRDA_CR_CRC; // CRC=1 + + switch_bank(iobase, BANK2); + outb(tmp, iobase+FIR_IRDA_CR); + } + else /* HP HDSL-1100 */ + { + if(speed <= 115200) /* SIR */ + { + + tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0 + + switch_bank(iobase, BANK2); + outb(tmp, iobase+FIR_IRDA_CR); + } + else /* MIR FIR */ + { + + switch(speed) + { + case 4000000: + tmp &= ~IRDA_CR_HDLC; // HDLC=0 + break; + + case 1152000: + tmp |= 0xA0; // HDLC=1, 1.152Mbps=1 + break; + + case 576000: + tmp &=~0x80; // HDLC 0.576Mbps + tmp |= 0x20; // HDLC=1, + break; + } + + tmp |= IRDA_CR_CRC; // CRC=1 + tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1 + + switch_bank(iobase, BANK2); + outb(tmp, iobase+FIR_IRDA_CR); + } + } + + switch_bank(iobase, BANK0); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +/* + * Function ali_ircc_sir_write (driver) + * + * Fill Tx FIFO with transmit data + * + */ +static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) +{ + int actual = 0; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + /* Tx FIFO should be empty! */ + if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) { + IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ ); + return 0; + } + + /* Fill FIFO with current frame */ + while ((fifo_size-- > 0) && (actual < len)) { + /* Transmit next byte */ + outb(buf[actual], iobase+UART_TX); + + actual++; + } + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + return actual; +} + +/* + * Function ali_ircc_net_open (dev) + * + * Start the device + * + */ +static int ali_ircc_net_open(struct net_device *dev) +{ + struct ali_ircc_cb *self; + int iobase; + char hwname[32]; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_ASSERT(dev != NULL, return -1;); + + self = (struct ali_ircc_cb *) dev->priv; + + IRDA_ASSERT(self != NULL, return 0;); + + iobase = self->io.fir_base; + + /* Request IRQ and install Interrupt Handler */ + if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev)) + { + IRDA_WARNING("%s, unable to allocate irq=%d\n", driver_name, + self->io.irq); + return -EAGAIN; + } + + /* + * Always allocate the DMA channel after the IRQ, and clean up on + * failure. + */ + if (request_dma(self->io.dma, dev->name)) { + IRDA_WARNING("%s, unable to allocate dma=%d\n", driver_name, + self->io.dma); + free_irq(self->io.irq, self); + return -EAGAIN; + } + + /* Turn on interrups */ + outb(UART_IER_RDI , iobase+UART_IER); + + /* Ready to play! */ + netif_start_queue(dev); //benjamin by irport + + /* Give self a hardware name */ + sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base); + + /* + * Open new IrLAP layer instance, now that everything should be + * initialized properly + */ + self->irlap = irlap_open(dev, &self->qos, hwname); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return 0; +} + +/* + * Function ali_ircc_net_close (dev) + * + * Stop the device + * + */ +static int ali_ircc_net_close(struct net_device *dev) +{ + + struct ali_ircc_cb *self; + //int iobase; + + IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_ASSERT(dev != NULL, return -1;); + + self = (struct ali_ircc_cb *) dev->priv; + IRDA_ASSERT(self != NULL, return 0;); + + /* Stop device */ + netif_stop_queue(dev); + + /* Stop and remove instance of IrLAP */ + if (self->irlap) + irlap_close(self->irlap); + self->irlap = NULL; + + disable_dma(self->io.dma); + + /* Disable interrupts */ + SetCOMInterrupts(self, FALSE); + + free_irq(self->io.irq, dev); + free_dma(self->io.dma); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return 0; +} + +/* + * Function ali_ircc_fir_hard_xmit (skb, dev) + * + * Transmit the frame + * + */ +static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ali_ircc_cb *self; + unsigned long flags; + int iobase; + __u32 speed; + int mtt, diff; + + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + + self = (struct ali_ircc_cb *) dev->priv; + iobase = self->io.fir_base; + + netif_stop_queue(dev); + + /* Make sure tests *& speed change are atomic */ + spin_lock_irqsave(&self->lock, flags); + + /* Note : you should make sure that speed changes are not going + * to corrupt any outgoing frame. Look at nsc-ircc for the gory + * details - Jean II */ + + /* Check if we need to change the speed */ + speed = irda_get_next_speed(skb); + if ((speed != self->io.speed) && (speed != -1)) { + /* Check for empty frame */ + if (!skb->len) { + ali_ircc_change_speed(self, speed); + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + dev_kfree_skb(skb); + return 0; + } else + self->new_speed = speed; + } + + /* Register and copy this frame to DMA memory */ + self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail; + self->tx_fifo.queue[self->tx_fifo.free].len = skb->len; + self->tx_fifo.tail += skb->len; + + self->stats.tx_bytes += skb->len; + + memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data, + skb->len); + + self->tx_fifo.len++; + self->tx_fifo.free++; + + /* Start transmit only if there is currently no transmit going on */ + if (self->tx_fifo.len == 1) + { + /* Check if we must wait the min turn time or not */ + mtt = irda_get_mtt(skb); + + if (mtt) + { + /* Check how much time we have used already */ + do_gettimeofday(&self->now); + + diff = self->now.tv_usec - self->stamp.tv_usec; + /* self->stamp is set from ali_ircc_dma_receive_complete() */ + + IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff); + + if (diff < 0) + diff += 1000000; + + /* Check if the mtt is larger than the time we have + * already used by all the protocol processing + */ + if (mtt > diff) + { + mtt -= diff; + + /* + * Use timer if delay larger than 1000 us, and + * use udelay for smaller values which should + * be acceptable + */ + if (mtt > 500) + { + /* Adjust for timer resolution */ + mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */ + + IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt); + + /* Setup timer */ + if (mtt == 1) /* 500 us */ + { + switch_bank(iobase, BANK1); + outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); + } + else if (mtt == 2) /* 1 ms */ + { + switch_bank(iobase, BANK1); + outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR); + } + else /* > 2ms -> 4ms */ + { + switch_bank(iobase, BANK1); + outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR); + } + + + /* Start timer */ + outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR); + self->io.direction = IO_XMIT; + + /* Enable timer interrupt */ + self->ier = IER_TIMER; + SetCOMInterrupts(self, TRUE); + + /* Timer will take care of the rest */ + goto out; + } + else + udelay(mtt); + } // if (if (mtt > diff) + }// if (mtt) + + /* Enable EOM interrupt */ + self->ier = IER_EOM; + SetCOMInterrupts(self, TRUE); + + /* Transmit frame */ + ali_ircc_dma_xmit(self); + } // if (self->tx_fifo.len == 1) + + out: + + /* Not busy transmitting anymore if window is not full */ + if (self->tx_fifo.free < MAX_TX_WINDOW) + netif_wake_queue(self->netdev); + + /* Restore bank register */ + switch_bank(iobase, BANK0); + + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + dev_kfree_skb(skb); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + return 0; +} + + +static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) +{ + int iobase, tmp; + unsigned char FIFO_OPTI, Hi, Lo; + + + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + + iobase = self->io.fir_base; + + /* FIFO threshold , this method comes from NDIS5 code */ + + if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold) + FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1; + else + FIFO_OPTI = TX_FIFO_Threshold; + + /* Disable DMA */ + switch_bank(iobase, BANK1); + outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); + + self->io.direction = IO_XMIT; + + irda_setup_dma(self->io.dma, + ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start - + self->tx_buff.head) + self->tx_buff_dma, + self->tx_fifo.queue[self->tx_fifo.ptr].len, + DMA_TX_MODE); + + /* Reset Tx FIFO */ + switch_bank(iobase, BANK0); + outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A); + + /* Set Tx FIFO threshold */ + if (self->fifo_opti_buf!=FIFO_OPTI) + { + switch_bank(iobase, BANK1); + outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ; + self->fifo_opti_buf=FIFO_OPTI; + } + + /* Set Tx DMA threshold */ + switch_bank(iobase, BANK1); + outb(TX_DMA_Threshold, iobase+FIR_DMA_TR); + + /* Set max Tx frame size */ + Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f; + Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff; + switch_bank(iobase, BANK2); + outb(Hi, iobase+FIR_TX_DSR_HI); + outb(Lo, iobase+FIR_TX_DSR_LO); + + /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */ + switch_bank(iobase, BANK0); + tmp = inb(iobase+FIR_LCR_B); + tmp &= ~0x20; // Disable SIP + outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B); + IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B)); + + outb(0, iobase+FIR_LSR); + + /* Enable DMA and Burst Mode */ + switch_bank(iobase, BANK1); + outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); + + switch_bank(iobase, BANK0); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) +{ + int iobase; + int ret = TRUE; + + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + + iobase = self->io.fir_base; + + /* Disable DMA */ + switch_bank(iobase, BANK1); + outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); + + /* Check for underrun! */ + switch_bank(iobase, BANK0); + if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT) + + { + IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__); + self->stats.tx_errors++; + self->stats.tx_fifo_errors++; + } + else + { + self->stats.tx_packets++; + } + + /* Check if we need to change the speed */ + if (self->new_speed) + { + ali_ircc_change_speed(self, self->new_speed); + self->new_speed = 0; + } + + /* Finished with this frame, so prepare for next */ + self->tx_fifo.ptr++; + self->tx_fifo.len--; + + /* Any frames to be sent back-to-back? */ + if (self->tx_fifo.len) + { + ali_ircc_dma_xmit(self); + + /* Not finished yet! */ + ret = FALSE; + } + else + { /* Reset Tx FIFO info */ + self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; + self->tx_fifo.tail = self->tx_buff.head; + } + + /* Make sure we have room for more frames */ + if (self->tx_fifo.free < MAX_TX_WINDOW) { + /* Not busy transmitting anymore */ + /* Tell the network layer, that we can accept more frames */ + netif_wake_queue(self->netdev); + } + + switch_bank(iobase, BANK0); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + return ret; +} + +/* + * Function ali_ircc_dma_receive (self) + * + * Get ready for receiving a frame. The device will initiate a DMA + * if it starts to receive a frame. + * + */ +static int ali_ircc_dma_receive(struct ali_ircc_cb *self) +{ + int iobase, tmp; + + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + + iobase = self->io.fir_base; + + /* Reset Tx FIFO info */ + self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; + self->tx_fifo.tail = self->tx_buff.head; + + /* Disable DMA */ + switch_bank(iobase, BANK1); + outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); + + /* Reset Message Count */ + switch_bank(iobase, BANK0); + outb(0x07, iobase+FIR_LSR); + + self->rcvFramesOverflow = FALSE; + + self->LineStatus = inb(iobase+FIR_LSR) ; + + /* Reset Rx FIFO info */ + self->io.direction = IO_RECV; + self->rx_buff.data = self->rx_buff.head; + + /* Reset Rx FIFO */ + // switch_bank(iobase, BANK0); + outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A); + + self->st_fifo.len = self->st_fifo.pending_bytes = 0; + self->st_fifo.tail = self->st_fifo.head = 0; + + irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, + DMA_RX_MODE); + + /* Set Receive Mode,Brick Wall */ + //switch_bank(iobase, BANK0); + tmp = inb(iobase+FIR_LCR_B); + outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM + IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B)); + + /* Set Rx Threshold */ + switch_bank(iobase, BANK1); + outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR); + outb(RX_DMA_Threshold, iobase+FIR_DMA_TR); + + /* Enable DMA and Burst Mode */ + // switch_bank(iobase, BANK1); + outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); + + switch_bank(iobase, BANK0); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + return 0; +} + +static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) +{ + struct st_fifo *st_fifo; + struct sk_buff *skb; + __u8 status, MessageCount; + int len, i, iobase, val; + + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + + st_fifo = &self->st_fifo; + iobase = self->io.fir_base; + + switch_bank(iobase, BANK0); + MessageCount = inb(iobase+ FIR_LSR)&0x07; + + if (MessageCount > 0) + IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount); + + for (i=0; i<=MessageCount; i++) + { + /* Bank 0 */ + switch_bank(iobase, BANK0); + status = inb(iobase+FIR_LSR); + + switch_bank(iobase, BANK2); + len = inb(iobase+FIR_RX_DSR_HI) & 0x0f; + len = len << 8; + len |= inb(iobase+FIR_RX_DSR_LO); + + IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len); + IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status); + + if (st_fifo->tail >= MAX_RX_WINDOW) { + IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ ); + continue; + } + + st_fifo->entries[st_fifo->tail].status = status; + st_fifo->entries[st_fifo->tail].len = len; + st_fifo->pending_bytes += len; + st_fifo->tail++; + st_fifo->len++; + } + + for (i=0; i<=MessageCount; i++) + { + /* Get first entry */ + status = st_fifo->entries[st_fifo->head].status; + len = st_fifo->entries[st_fifo->head].len; + st_fifo->pending_bytes -= len; + st_fifo->head++; + st_fifo->len--; + + /* Check for errors */ + if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) + { + IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ ); + + /* Skip frame */ + self->stats.rx_errors++; + + self->rx_buff.data += len; + + if (status & LSR_FIFO_UR) + { + self->stats.rx_frame_errors++; + IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ ); + } + if (status & LSR_FRAME_ERROR) + { + self->stats.rx_frame_errors++; + IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ ); + } + + if (status & LSR_CRC_ERROR) + { + self->stats.rx_crc_errors++; + IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ ); + } + + if(self->rcvFramesOverflow) + { + self->stats.rx_frame_errors++; + IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ ); + } + if(len == 0) + { + self->stats.rx_frame_errors++; + IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ ); + } + } + else + { + + if (st_fifo->pending_bytes < 32) + { + switch_bank(iobase, BANK0); + val = inb(iobase+FIR_BSR); + if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) + { + IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ ); + + /* Put this entry back in fifo */ + st_fifo->head--; + st_fifo->len++; + st_fifo->pending_bytes += len; + st_fifo->entries[st_fifo->head].status = status; + st_fifo->entries[st_fifo->head].len = len; + + /* + * DMA not finished yet, so try again + * later, set timer value, resolution + * 500 us + */ + + switch_bank(iobase, BANK1); + outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM + + /* Enable Timer */ + outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR); + + return FALSE; /* I'll be back! */ + } + } + + /* + * Remember the time we received this frame, so we can + * reduce the min turn time a bit since we will know + * how much time we have used for protocol processing + */ + do_gettimeofday(&self->stamp); + + skb = dev_alloc_skb(len+1); + if (skb == NULL) + { + IRDA_WARNING("%s(), memory squeeze, " + "dropping frame.\n", + __FUNCTION__); + self->stats.rx_dropped++; + + return FALSE; + } + + /* Make sure IP header gets aligned */ + skb_reserve(skb, 1); + + /* Copy frame without CRC, CRC is removed by hardware*/ + skb_put(skb, len); + memcpy(skb->data, self->rx_buff.data, len); + + /* Move to next frame */ + self->rx_buff.data += len; + self->stats.rx_bytes += len; + self->stats.rx_packets++; + + skb->dev = self->netdev; + skb->mac.raw = skb->data; + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + self->netdev->last_rx = jiffies; + } + } + + switch_bank(iobase, BANK0); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + return TRUE; +} + + + +/* + * Function ali_ircc_sir_hard_xmit (skb, dev) + * + * Transmit the frame! + * + */ +static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ali_ircc_cb *self; + unsigned long flags; + int iobase; + __u32 speed; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_ASSERT(dev != NULL, return 0;); + + self = (struct ali_ircc_cb *) dev->priv; + IRDA_ASSERT(self != NULL, return 0;); + + iobase = self->io.sir_base; + + netif_stop_queue(dev); + + /* Make sure tests *& speed change are atomic */ + spin_lock_irqsave(&self->lock, flags); + + /* Note : you should make sure that speed changes are not going + * to corrupt any outgoing frame. Look at nsc-ircc for the gory + * details - Jean II */ + + /* Check if we need to change the speed */ + speed = irda_get_next_speed(skb); + if ((speed != self->io.speed) && (speed != -1)) { + /* Check for empty frame */ + if (!skb->len) { + ali_ircc_change_speed(self, speed); + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + dev_kfree_skb(skb); + return 0; + } else + self->new_speed = speed; + } + + /* Init tx buffer */ + self->tx_buff.data = self->tx_buff.head; + + /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ + self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, + self->tx_buff.truesize); + + self->stats.tx_bytes += self->tx_buff.len; + + /* Turn on transmit finished interrupt. Will fire immediately! */ + outb(UART_IER_THRI, iobase+UART_IER); + + dev->trans_start = jiffies; + spin_unlock_irqrestore(&self->lock, flags); + + dev_kfree_skb(skb); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return 0; +} + + +/* + * Function ali_ircc_net_ioctl (dev, rq, cmd) + * + * Process IOCTL commands for this device + * + */ +static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct if_irda_req *irq = (struct if_irda_req *) rq; + struct ali_ircc_cb *self; + unsigned long flags; + int ret = 0; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_ASSERT(dev != NULL, return -1;); + + self = dev->priv; + + IRDA_ASSERT(self != NULL, return -1;); + + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd); + + switch (cmd) { + case SIOCSBANDWIDTH: /* Set bandwidth */ + IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ ); + /* + * This function will also be used by IrLAP to change the + * speed, so we still must allow for speed change within + * interrupt context. + */ + if (!in_interrupt() && !capable(CAP_NET_ADMIN)) + return -EPERM; + + spin_lock_irqsave(&self->lock, flags); + ali_ircc_change_speed(self, irq->ifr_baudrate); + spin_unlock_irqrestore(&self->lock, flags); + break; + case SIOCSMEDIABUSY: /* Set media busy */ + IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ ); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + irda_device_set_media_busy(self->netdev, TRUE); + break; + case SIOCGRECEIVING: /* Check if we are receiving right now */ + IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ ); + /* This is protected */ + irq->ifr_receiving = ali_ircc_is_receiving(self); + break; + default: + ret = -EOPNOTSUPP; + } + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return ret; +} + +/* + * Function ali_ircc_is_receiving (self) + * + * Return TRUE is we are currently receiving a frame + * + */ +static int ali_ircc_is_receiving(struct ali_ircc_cb *self) +{ + unsigned long flags; + int status = FALSE; + int iobase; + + IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + + IRDA_ASSERT(self != NULL, return FALSE;); + + spin_lock_irqsave(&self->lock, flags); + + if (self->io.speed > 115200) + { + iobase = self->io.fir_base; + + switch_bank(iobase, BANK1); + if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) + { + /* We are receiving something */ + IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ ); + status = TRUE; + } + switch_bank(iobase, BANK0); + } + else + { + status = (self->rx_buff.state != OUTSIDE_FRAME); + } + + spin_unlock_irqrestore(&self->lock, flags); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return status; +} + +static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev) +{ + struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return &self->stats; +} + +static void ali_ircc_suspend(struct ali_ircc_cb *self) +{ + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + IRDA_MESSAGE("%s, Suspending\n", driver_name); + + if (self->io.suspended) + return; + + ali_ircc_net_close(self->netdev); + + self->io.suspended = 1; + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static void ali_ircc_wakeup(struct ali_ircc_cb *self) +{ + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + if (!self->io.suspended) + return; + + ali_ircc_net_open(self->netdev); + + IRDA_MESSAGE("%s, Waking up\n", driver_name); + + self->io.suspended = 0; + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data) +{ + struct ali_ircc_cb *self = (struct ali_ircc_cb*) dev->data; + + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + if (self) { + switch (rqst) { + case PM_SUSPEND: + ali_ircc_suspend(self); + break; + case PM_RESUME: + ali_ircc_wakeup(self); + break; + } + } + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + + return 0; +} + + +/* ALi Chip Function */ + +static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) +{ + + unsigned char newMask; + + int iobase = self->io.fir_base; /* or sir_base */ + + IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable); + + /* Enable the interrupt which we wish to */ + if (enable){ + if (self->io.direction == IO_XMIT) + { + if (self->io.speed > 115200) /* FIR, MIR */ + { + newMask = self->ier; + } + else /* SIR */ + { + newMask = UART_IER_THRI | UART_IER_RDI; + } + } + else { + if (self->io.speed > 115200) /* FIR, MIR */ + { + newMask = self->ier; + } + else /* SIR */ + { + newMask = UART_IER_RDI; + } + } + } + else /* Disable all the interrupts */ + { + newMask = 0x00; + + } + + //SIR and FIR has different registers + if (self->io.speed > 115200) + { + switch_bank(iobase, BANK0); + outb(newMask, iobase+FIR_IER); + } + else + outb(newMask, iobase+UART_IER); + + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static void SIR2FIR(int iobase) +{ + //unsigned char tmp; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + /* Already protected (change_speed() or setup()), no need to lock. + * Jean II */ + + outb(0x28, iobase+UART_MCR); + outb(0x68, iobase+UART_MCR); + outb(0x88, iobase+UART_MCR); + + outb(0x60, iobase+FIR_MCR); /* Master Reset */ + outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */ + + //tmp = inb(iobase+FIR_LCR_B); /* SIP enable */ + //tmp |= 0x20; + //outb(tmp, iobase+FIR_LCR_B); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +static void FIR2SIR(int iobase) +{ + unsigned char val; + + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + + /* Already protected (change_speed() or setup()), no need to lock. + * Jean II */ + + outb(0x20, iobase+FIR_MCR); /* IRQ to low */ + outb(0x00, iobase+UART_IER); + + outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */ + outb(0x00, iobase+UART_FCR); + outb(0x07, iobase+UART_FCR); + + val = inb(iobase+UART_RX); + val = inb(iobase+UART_LSR); + val = inb(iobase+UART_MSR); + + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); +} + +MODULE_AUTHOR("Benjamin Kong "); +MODULE_DESCRIPTION("ALi FIR Controller Driver"); +MODULE_LICENSE("GPL"); + + +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io, "Base I/O addresses"); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(irq, "IRQ lines"); +module_param_array(dma, int, NULL, 0); +MODULE_PARM_DESC(dma, "DMA channels"); + +module_init(ali_ircc_init); +module_exit(ali_ircc_cleanup); -- cgit v1.2.3