From 1609559547ae0ddc2e4829c7f78ac2c4869875b9 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 29 Jan 2009 17:29:15 -0800 Subject: smsc9420: fix interrupt signalling test failures smsc9420 performs an interrupt signalling test when the interface is brought up. The current code mistakenly sets its test flag to false AFTER enabling the software interrupt source, making failure quite likely. This patch changes the code to set the test flag BEFORE enabling interrupts. I've also removed an smp_wmb because the following spinlock provides an implicit memory barrier. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net/smsc9420.c') diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6452c..d801900a503 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; -- cgit v1.2.3 From 46578a6913e6f5e69229561736b94c18c2e88ae4 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 2 Feb 2009 21:39:02 -0800 Subject: net: variables reach -1, but 0 tested while (timeout--) { ... } timeout becomes -1 if the loop isn't ended otherwise, not 0. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net/smsc9420.c') diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index d801900a503..a1e4b3895b3 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -498,7 +498,7 @@ static void smsc9420_check_mac_address(struct net_device *dev) static void smsc9420_stop_tx(struct smsc9420_pdata *pd) { u32 dmac_control, mac_cr, dma_intr_ena; - int timeOut = 1000; + int timeout = 1000; /* disable TX DMAC */ dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); @@ -506,13 +506,13 @@ static void smsc9420_stop_tx(struct smsc9420_pdata *pd) smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); /* Wait max 10ms for transmit process to stop */ - while (timeOut--) { + while (--timeout) { if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_) break; udelay(10); } - if (!timeOut) + if (!timeout) smsc_warn(IFDOWN, "TX DMAC failed to stop"); /* ACK Tx DMAC stop bit */ @@ -596,7 +596,7 @@ static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd) static void smsc9420_stop_rx(struct smsc9420_pdata *pd) { - int timeOut = 1000; + int timeout = 1000; u32 mac_cr, dmac_control, dma_intr_ena; /* mask RX DMAC interrupts */ @@ -617,13 +617,13 @@ static void smsc9420_stop_rx(struct smsc9420_pdata *pd) smsc9420_pci_flush_write(pd); /* wait up to 10ms for receive to stop */ - while (timeOut--) { + while (--timeout) { if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_) break; udelay(10); } - if (!timeOut) + if (!timeout) smsc_warn(IFDOWN, "RX DMAC did not stop! timeout."); /* ACK the Rx DMAC stop bit */ -- cgit v1.2.3 From 9df8f4e3ee760c14211a5f484e9ee4f0bc0c566b Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 16 Feb 2009 07:46:06 +0000 Subject: smsc9420: fix another postfixed timeout Roel Kluin recently fixed several instances where variables reach -1, but 0 is tested afterwards. This patch fixes another, so the timeout will be correctly detected and a warning printed. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/smsc9420.c') diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index a1e4b3895b3..83938e1953b 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -341,7 +341,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op) do { msleep(1); e2cmd = smsc9420_reg_read(pd, E2P_CMD); - } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--)); + } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); if (!timeout) { smsc_info(HW, "TIMED OUT"); -- cgit v1.2.3 From 196b7e1b9cca9e187bb61fa7d60f04f4ab2c0592 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Sun, 15 Feb 2009 22:55:01 +0000 Subject: smsc9420: handle magic field of ethtool_eeprom ethtool.h says the driver should set the magic field in get_eeprom and verify it in set_eeprom. This patch adds this functionality using an arbitary driver-specific magic value constant (0x9420). Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/smsc9420.c') diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index 83938e1953b..4e15ae068b3 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -413,6 +413,7 @@ static int smsc9420_ethtool_get_eeprom(struct net_device *dev, } memcpy(data, &eeprom_data[eeprom->offset], len); + eeprom->magic = SMSC9420_EEPROM_MAGIC; eeprom->len = len; return 0; } @@ -423,6 +424,9 @@ static int smsc9420_ethtool_set_eeprom(struct net_device *dev, struct smsc9420_pdata *pd = netdev_priv(dev); int ret; + if (eeprom->magic != SMSC9420_EEPROM_MAGIC) + return -EINVAL; + smsc9420_eeprom_enable_access(pd); smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_); ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data); -- cgit v1.2.3