From aa6f5ffbdba45aa8e19e5048648fc6c7b25376d3 Mon Sep 17 00:00:00 2001 From: merge Date: Thu, 22 Jan 2009 13:55:32 +0000 Subject: MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage: From: merge MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage: From: merge MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage: From: Andy Green fix-stray-endmenu.patch Signed-off-by: Andy Green --- drivers/net/starfire.c | 117 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 84 insertions(+), 33 deletions(-) (limited to 'drivers/net/starfire.c') diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 1d2ef8f4778..da3a76b18ef 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -42,11 +42,11 @@ #include #include #include +#include #include /* Processor type for cache alignment. */ #include #include -#include "starfire_firmware.h" /* * The current frame processor firmware fails to checksum a fragment * of length 1. If and when this is fixed, the #define below can be removed. @@ -173,6 +173,10 @@ static int full_duplex[MAX_UNITS] = {0, }; #define skb_first_frag_len(skb) skb_headlen(skb) #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) +/* Firmware names */ +#define FIRMWARE_RX "adaptec/starfire_rx.bin" +#define FIRMWARE_TX "adaptec/starfire_tx.bin" + /* These identify the driver base version and may not be removed. */ static char version[] = KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker \n" @@ -182,6 +186,8 @@ MODULE_AUTHOR("Donald Becker "); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_FIRMWARE(FIRMWARE_RX); +MODULE_FIRMWARE(FIRMWARE_TX); module_param(max_interrupt_work, int, 0); module_param(mtu, int, 0); @@ -642,6 +648,24 @@ static void netdev_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) #endif /* VLAN_SUPPORT */ +static const struct net_device_ops netdev_ops = { + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_start_xmit = start_tx, + .ndo_tx_timeout = tx_timeout, + .ndo_get_stats = get_stats, + .ndo_set_multicast_list = &set_rx_mode, + .ndo_do_ioctl = netdev_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef VLAN_SUPPORT + .ndo_vlan_rx_register = netdev_vlan_rx_register, + .ndo_vlan_rx_add_vid = netdev_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = netdev_vlan_rx_kill_vid, +#endif +}; + static int __devinit starfire_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -653,7 +677,6 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, void __iomem *base; int drv_flags, io_size; int boguscnt; - DECLARE_MAC_BUF(mac); /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -705,11 +728,9 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, if (enable_hw_cksum) dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; #endif /* ZEROCOPY */ + #ifdef VLAN_SUPPORT dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; - dev->vlan_rx_register = netdev_vlan_rx_register; - dev->vlan_rx_add_vid = netdev_vlan_rx_add_vid; - dev->vlan_rx_kill_vid = netdev_vlan_rx_kill_vid; #endif /* VLAN_RX_KILL_VID */ #ifdef ADDR_64BITS dev->features |= NETIF_F_HIGHDMA; @@ -805,27 +826,21 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, } } - /* The chip-specific entries in the device structure. */ - dev->open = &netdev_open; - dev->hard_start_xmit = &start_tx; - dev->tx_timeout = tx_timeout; + dev->netdev_ops = &netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; - netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work); - dev->stop = &netdev_close; - dev->get_stats = &get_stats; - dev->set_multicast_list = &set_rx_mode; - dev->do_ioctl = &netdev_ioctl; SET_ETHTOOL_OPS(dev, ðtool_ops); + netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work); + if (mtu) dev->mtu = mtu; if (register_netdev(dev)) goto err_out_cleardev; - printk(KERN_INFO "%s: %s at %p, %s, IRQ %d.\n", + printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", dev->name, netdrv_tbl[chip_idx].name, base, - print_mac(mac, dev->dev_addr), irq); + dev->dev_addr, irq); if (drv_flags & CanHaveMII) { int phy, phy_idx = 0; @@ -881,9 +896,9 @@ static int mdio_read(struct net_device *dev, int phy_id, int location) void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2); int result, boguscnt=1000; /* ??? Should we add a busy-wait here? */ - do + do { result = readl(mdio_addr); - while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0); + } while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0); if (boguscnt == 0) return 0; if ((result & 0xffff) == 0xffff) @@ -903,9 +918,12 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val static int netdev_open(struct net_device *dev) { + const struct firmware *fw_rx, *fw_tx; + const __be32 *fw_rx_data, *fw_tx_data; struct netdev_private *np = netdev_priv(dev); void __iomem *ioaddr = np->base; int i, retval; + size_t tx_size, rx_size; size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; /* Do we ever need to reset the chip??? */ @@ -1041,11 +1059,40 @@ static int netdev_open(struct net_device *dev) writel(ETH_P_8021Q, ioaddr + VlanType); #endif /* VLAN_SUPPORT */ + retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev); + if (retval) { + printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", + FIRMWARE_RX); + return retval; + } + if (fw_rx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_rx->size, FIRMWARE_RX); + retval = -EINVAL; + goto out_rx; + } + retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev); + if (retval) { + printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", + FIRMWARE_TX); + goto out_rx; + } + if (fw_tx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_tx->size, FIRMWARE_TX); + retval = -EINVAL; + goto out_tx; + } + fw_rx_data = (const __be32 *)&fw_rx->data[0]; + fw_tx_data = (const __be32 *)&fw_tx->data[0]; + rx_size = fw_rx->size / 4; + tx_size = fw_tx->size / 4; + /* Load Rx/Tx firmware into the frame processors */ - for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++) - writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4); - for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++) - writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4); + for (i = 0; i < rx_size; i++) + writel(be32_to_cpup(&fw_rx_data[i]), ioaddr + RxGfpMem + i * 4); + for (i = 0; i < tx_size; i++) + writel(be32_to_cpup(&fw_tx_data[i]), ioaddr + TxGfpMem + i * 4); if (enable_hw_cksum) /* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); @@ -1057,7 +1104,11 @@ static int netdev_open(struct net_device *dev) printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name); - return 0; +out_tx: + release_firmware(fw_tx); +out_rx: + release_firmware(fw_rx); + return retval; } @@ -1291,8 +1342,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) if (intr_status & (IntrRxDone | IntrRxEmpty)) { u32 enable; - if (likely(netif_rx_schedule_prep(dev, &np->napi))) { - __netif_rx_schedule(dev, &np->napi); + if (likely(netif_rx_schedule_prep(&np->napi))) { + __netif_rx_schedule(&np->napi); enable = readl(ioaddr + IntrEnable); enable &= ~(IntrRxDone | IntrRxEmpty); writel(enable, ioaddr + IntrEnable); @@ -1452,12 +1503,8 @@ static int __netdev_rx(struct net_device *dev, int *quota) #ifndef final_version /* Remove after testing. */ /* You will want this info for the initial debug. */ if (debug > 5) { - printk(KERN_DEBUG " Rx data " MAC_FMT " " MAC_FMT - " %2.2x%2.2x.\n", - skb->data[0], skb->data[1], skb->data[2], - skb->data[3], skb->data[4], skb->data[5], - skb->data[6], skb->data[7], skb->data[8], - skb->data[9], skb->data[10], skb->data[11], + printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n", + skb->data, skb->data + 6, skb->data[12], skb->data[13]); } #endif @@ -1501,7 +1548,6 @@ static int __netdev_rx(struct net_device *dev, int *quota) } else #endif /* VLAN_SUPPORT */ netif_receive_skb(skb); - dev->last_rx = jiffies; np->stats.rx_packets++; next_rx: @@ -1509,6 +1555,11 @@ static int __netdev_rx(struct net_device *dev, int *quota) desc->status = 0; np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE; } + + if (*quota == 0) { /* out of rx quota */ + retcode = 1; + goto out; + } writew(np->rx_done, np->base + CompletionQConsumerIdx); out: @@ -1536,7 +1587,7 @@ static int netdev_poll(struct napi_struct *napi, int budget) intr_status = readl(ioaddr + IntrStatus); } while (intr_status & (IntrRxDone | IntrRxEmpty)); - netif_rx_complete(dev, napi); + netif_rx_complete(napi); intr_status = readl(ioaddr + IntrEnable); intr_status |= IntrRxDone | IntrRxEmpty; writel(intr_status, ioaddr + IntrEnable); -- cgit v1.2.3