From e56db718468416ce5ff1ba05e7fa5026424befd5 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 23 Dec 2008 15:58:47 -0800 Subject: ath9k: remove mode specific default noise floor values The NOISE_FLOOR array we have is mode specific, and the only possible indexed values are A, B and G. The mode routine only can return G or A, so this is band specific. Then since the values for A and G (5ghz or 2ghz) are the same (-96) we simply remove the array and use a static value. If we later determine we want to use special values for HT configurations we can use the new mac80211 conf_is_ht*() helpers. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/calib.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath9k/calib.c b/drivers/net/wireless/ath9k/calib.c index 707289685b4..8e073d6513d 100644 --- a/drivers/net/wireless/ath9k/calib.c +++ b/drivers/net/wireless/ath9k/calib.c @@ -19,8 +19,6 @@ #include "reg.h" #include "phy.h" -static const int16_t NOISE_FLOOR[] = { -96, -93, -98, -96, -93, -96 }; - /* We can tune this as we go by monitoring really low values */ #define ATH9K_NF_TOO_LOW -60 @@ -740,10 +738,9 @@ s16 ath9k_hw_getchan_noise(struct ath_hal *ah, struct ath9k_channel *chan) chan->channel, chan->channelFlags); return ATH_DEFAULT_NOISE_FLOOR; } - if (ichan->rawNoiseFloor == 0) { - enum wireless_mode mode = ath9k_hw_chan2wmode(ah, chan); - nf = NOISE_FLOOR[mode]; - } else + if (ichan->rawNoiseFloor == 0) + nf = -96; + else nf = ichan->rawNoiseFloor; if (!ath9k_hw_nf_in_range(ah, nf)) -- cgit v1.2.3