From fe905f1d5a8404f45fa0df26e6a870bf1e3b5983 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 11 Jul 2008 11:53:39 +0800 Subject: iwlwifi: enable active scanning This patch enables active scan on active channels. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 86 +++++++++++++++++---------------- 1 file changed, 45 insertions(+), 41 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index cf24c2703c9..efc750d2fc5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -38,8 +38,11 @@ /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after * sending probe req. This should be set long enough to hear probe responses * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (10) +#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ +#define IWL_ACTIVE_DWELL_TIME_52 (20) + +#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) +#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) /* For faster active scanning, scan will move to the next channel if fewer than * PLCP_QUIET_THRESH packets are heard on this channel within @@ -48,7 +51,7 @@ * no other traffic). * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */ -#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */ +#define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(10) /* msec */ /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. * Must be set longer than active dwell time. @@ -58,10 +61,15 @@ #define IWL_PASSIVE_DWELL_BASE (100) #define IWL_CHANNEL_TUNE_TIME 5 +#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) + + static int scan_tx_ant[3] = { RATE_MCS_ANT_A_MSK, RATE_MCS_ANT_B_MSK, RATE_MCS_ANT_C_MSK }; + + static int iwl_is_empty_essid(const char *essid, int essid_len) { /* Single white space is for Linksys APs */ @@ -226,8 +234,9 @@ static void iwl_rx_scan_start_notif(struct iwl_priv *priv, "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", notif->channel, notif->band ? "bg" : "a", - notif->tsf_high, - notif->tsf_low, notif->status, notif->beacon_timer); + le32_to_cpu(notif->tsf_high), + le32_to_cpu(notif->tsf_low), + notif->status, notif->beacon_timer); } /* Service SCAN_RESULTS_NOTIFICATION (0x83) */ @@ -332,19 +341,21 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) EXPORT_SYMBOL(iwl_setup_rx_scan_handlers); static inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) + enum ieee80211_band band, + u8 n_probes) { if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52; + return IWL_ACTIVE_DWELL_TIME_52 + + IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); else - return IWL_ACTIVE_DWELL_TIME_24; + return IWL_ACTIVE_DWELL_TIME_24 + + IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); } static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) + enum ieee80211_band band) { - u16 active = iwl_get_active_dwell_time(priv, band); - u16 passive = (band != IEEE80211_BAND_5GHZ) ? + u16 passive = (band == IEEE80211_BAND_2GHZ) ? IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; @@ -358,15 +369,12 @@ static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; } - if (passive <= active) - passive = active + 1; - return passive; } static int iwl_get_channels_for_scan(struct iwl_priv *priv, enum ieee80211_band band, - u8 is_active, u8 direct_mask, + u8 is_active, u8 n_probes, struct iwl_scan_channel *scan_ch) { const struct ieee80211_channel *channels = NULL; @@ -383,9 +391,12 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, channels = sband->channels; - active_dwell = iwl_get_active_dwell_time(priv, band); + active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); passive_dwell = iwl_get_passive_dwell_time(priv, band); + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + for (i = 0, added = 0; i < sband->n_channels; i++) { if (channels[i].flags & IEEE80211_CHAN_DISABLED) continue; @@ -407,8 +418,8 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, else scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - if (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) - scan_ch->type |= cpu_to_le32(direct_mask << 1); + if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes) + scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); @@ -416,18 +427,17 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, /* Set txpower levels to defaults */ scan_ch->dsp_atten = 110; + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ if (band == IEEE80211_BAND_5GHZ) scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else { + else scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - } - IWL_DEBUG_SCAN("Scanning %d [%s %d]\n", - channel, + IWL_DEBUG_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", + channel, le32_to_cpu(scan_ch->type), (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE", (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? @@ -676,7 +686,7 @@ static u32 iwl_scan_tx_ant(struct iwl_priv *priv, enum ieee80211_band band) break; } } - + IWL_DEBUG_SCAN("select TX ANT = %c\n", 'A' + ind); return scan_tx_ant[ind]; } @@ -696,7 +706,7 @@ static void iwl_bg_request_scan(struct work_struct *data) u32 tx_ant; u16 cmd_len; enum ieee80211_band band; - u8 direct_mask; + u8 n_probes = 2; u8 rx_chain = 0x7; /* bitmap: ABC chains */ conf = ieee80211_get_hw_conf(priv->hw); @@ -796,17 +806,16 @@ static void iwl_bg_request_scan(struct work_struct *data) scan->direct_scan[0].len = priv->direct_ssid_len; memcpy(scan->direct_scan[0].ssid, priv->direct_ssid, priv->direct_ssid_len); - direct_mask = 1; + n_probes++; } else if (!iwl_is_associated(priv) && priv->essid_len) { IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n", iwl_escape_essid(priv->essid, priv->essid_len)); scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->essid_len; memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); - direct_mask = 1; + n_probes++; } else { IWL_DEBUG_SCAN("Start indirect scan.\n"); - direct_mask = 0; } scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; @@ -863,16 +872,11 @@ static void iwl_bg_request_scan(struct work_struct *data) scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK); - if (direct_mask) - scan->channel_count = - iwl_get_channels_for_scan(priv, band, 1, /* active */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - else - scan->channel_count = - iwl_get_channels_for_scan(priv, band, 0, /* passive */ - direct_mask, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + scan->channel_count = + iwl_get_channels_for_scan(priv, band, 1, /* active */ + n_probes, + (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + if (scan->channel_count == 0) { IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count); goto done; -- cgit v1.2.3