From a07bc1ffaeee9f05490193f66915ac086c6ea5c9 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Fri, 14 Sep 2007 00:40:14 +0200 Subject: myri10ge: Add support for PCI device id 9 Add support for new Myri-10G boards with PCI device id 9. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 1c42266bf88..556962f9612 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3094,9 +3094,12 @@ static void myri10ge_remove(struct pci_dev *pdev) } #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008 +#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009 static struct pci_device_id myri10ge_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)}, + {PCI_DEVICE + (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)}, {0}, }; -- cgit v1.2.3 From 680e9fe9d69ea86e81c859932bfd751be91cc0e0 Mon Sep 17 00:00:00 2001 From: Domen Puncer Date: Mon, 17 Sep 2007 22:21:40 +0200 Subject: phy: export phy_mii_ioctl Export phy_mii_ioctl, so network drivers can use it when built as modules too. Signed-off-by: Domen Puncer Signed-off-by: Jeff Garzik --- drivers/net/phy/phy.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 0cc4369cacb..cb230f44d6f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -409,6 +409,7 @@ int phy_mii_ioctl(struct phy_device *phydev, return 0; } +EXPORT_SYMBOL(phy_mii_ioctl); /** * phy_start_aneg - start auto-negotiation for this PHY device -- cgit v1.2.3 From d6532232cd3de79c852685823a9c52f723816d0a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:42 -0700 Subject: sky2: fix VLAN receive processing (resend) The length check for truncated frames was not correctly handling the case where VLAN acceleration had already read the tag. Also, the Yukon EX has some features that use high bit of status as security tag. Signed-off-by: Pierre-Yves Ritschard Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 14 +++++++++++++- drivers/net/sky2.h | 2 +- 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 5d812de65d9..8b1565453f0 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2103,6 +2103,13 @@ static struct sk_buff *sky2_receive(struct net_device *dev, struct sky2_port *sky2 = netdev_priv(dev); struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; + u16 count = (status & GMR_FS_LEN) >> 16; + +#ifdef SKY2_VLAN_TAG_USED + /* Account for vlan tag */ + if (sky2->vlgrp && (status & GMR_FS_VLAN)) + count -= VLAN_HLEN; +#endif if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", @@ -2117,7 +2124,8 @@ static struct sk_buff *sky2_receive(struct net_device *dev, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if (status >> 16 != length) + /* if length reported by DMA does not match PHY, packet was truncated */ + if (length != count) goto len_mismatch; if (length < copybreak) @@ -2133,6 +2141,10 @@ len_mismatch: /* Truncation of overlength packets causes PHY length to not match MAC length */ ++sky2->net_stats.rx_length_errors; + if (netif_msg_rx_err(sky2) && net_ratelimit()) + pr_info(PFX "%s: rx length mismatch: length %d status %#x\n", + dev->name, length, status); + goto resubmit; error: ++sky2->net_stats.rx_errors; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 72e12b7cfa4..3baae48f804 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1668,7 +1668,7 @@ enum { /* Receive Frame Status Encoding */ enum { - GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_LEN = 0x7fff<<16, /* Bit 30..16: Rx Frame Length */ GMR_FS_VLAN = 1<<13, /* VLAN Packet */ GMR_FS_JABBER = 1<<12, /* Jabber Packet */ GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */ -- cgit v1.2.3 From c99210b50fe741026d86fdcb5f3f5a0c00c503cc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:43 -0700 Subject: sky2: ethtool speed report bug On 100mbit versions, the driver always reports gigabit speed available. The correct modes are already computed, then overwritten. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 8b1565453f0..94552cc4c46 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2841,13 +2841,6 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->supported = sky2_supported_modes(hw); ecmd->phy_address = PHY_ADDR_MARV; if (sky2_is_copper(hw)) { - ecmd->supported = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg | SUPPORTED_TP; ecmd->port = PORT_TP; ecmd->speed = sky2->speed; } else { -- cgit v1.2.3 From ea76e63598eb312e5d33a782275be91038fc6df2 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:44 -0700 Subject: sky2: reorganize chip revision features This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 135 +++++++++++++++++++++++++++++++---------------------- drivers/net/sky2.h | 12 ++++- 2 files changed, 90 insertions(+), 57 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 94552cc4c46..060951a8022 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -217,8 +217,7 @@ static void sky2_power_on(struct sky2_hw *hw) else sky2_write8(hw, B2_Y2_CLK_GATE, 0); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_ADV_POWER_CTL) { u32 reg; sky2_pci_write32(hw, PCI_DEV_REG3, 0); @@ -311,10 +310,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) struct sky2_port *sky2 = netdev_priv(hw->dev[port]); u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; - if (sky2->autoneg == AUTONEG_ENABLE - && !(hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX)) { + if (sky2->autoneg == AUTONEG_ENABLE && + !(hw->flags & SKY2_HW_NEWER_PHY)) { u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | @@ -346,9 +343,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* downshift on PHY 88E1112 and 88E1149 is changed */ if (sky2->autoneg == AUTONEG_ENABLE - && (hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX)) { + && (hw->flags & SKY2_HW_NEWER_PHY)) { /* set downshift counter to 3x and enable downshift */ ctrl &= ~PHY_M_PC_DSC_MSK; ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; @@ -364,7 +359,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); /* special setup for PHY 88E1112 Fiber */ - if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) { + if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) { pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ @@ -788,7 +783,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { + if (!(hw->flags & SKY2_HW_RAMBUFFER)) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); @@ -967,19 +962,15 @@ static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) */ static void rx_set_checksum(struct sky2_port *sky2) { - struct sky2_rx_le *le; - - if (sky2->hw->chip_id != CHIP_ID_YUKON_EX) { - le = sky2_next_rx(sky2); - le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); - le->ctrl = 0; - le->opcode = OP_TCPSTART | HW_OWNER; + struct sky2_rx_le *le = sky2_next_rx(sky2); - sky2_write32(sky2->hw, - Q_ADDR(rxqaddr[sky2->port], Q_CSR), - sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); - } + le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); + le->ctrl = 0; + le->opcode = OP_TCPSTART | HW_OWNER; + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } /* @@ -1175,7 +1166,8 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); - rx_set_checksum(sky2); + if (!(hw->flags & SKY2_HW_NEW_LE)) + rx_set_checksum(sky2); /* Space needed for frame data + headers rounded up */ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); @@ -1246,7 +1238,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 ramsize, imask; + u32 imask; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1301,13 +1293,13 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - /* Register is number of 4K blocks on internal RAM buffer. */ - ramsize = sky2_read8(hw, B2_E_0) * 4; - printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize); - - if (ramsize > 0) { + if (hw->flags & SKY2_HW_RAMBUFFER) { + /* Register is number of 4K blocks on internal RAM buffer. */ + u32 ramsize = sky2_read8(hw, B2_E_0) * 4; u32 rxspace; + printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize); + if (ramsize < 16) rxspace = ramsize / 2; else @@ -1436,13 +1428,15 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Check for TCP Segmentation Offload */ mss = skb_shinfo(skb)->gso_size; if (mss != 0) { - if (hw->chip_id != CHIP_ID_YUKON_EX) + + if (!(hw->flags & SKY2_HW_NEW_LE)) mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb); if (mss != sky2->tx_last_mss) { le = get_tx_le(sky2); le->addr = cpu_to_le32(mss); - if (hw->chip_id == CHIP_ID_YUKON_EX) + + if (hw->flags & SKY2_HW_NEW_LE) le->opcode = OP_MSS | HW_OWNER; else le->opcode = OP_LRGLEN | HW_OWNER; @@ -1468,8 +1462,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Handle TCP checksum offload */ if (skb->ip_summed == CHECKSUM_PARTIAL) { /* On Yukon EX (some versions) encoding change. */ - if (hw->chip_id == CHIP_ID_YUKON_EX - && hw->chip_rev != CHIP_REV_YU_EX_B0) + if (hw->flags & SKY2_HW_AUTO_TX_SUM) ctrl |= CALSUM; /* auto checksum */ else { const unsigned offset = skb_transport_offset(skb); @@ -1708,7 +1701,7 @@ static int sky2_down(struct net_device *dev) static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) { - if (!sky2_is_copper(hw)) + if (hw->flags & SKY2_HW_FIBRE_PHY) return SPEED_1000; if (hw->chip_id == CHIP_ID_YUKON_FE) @@ -1753,9 +1746,7 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_NEWER_PHY) { u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ @@ -1847,7 +1838,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) /* Since the pause result bits seem to in different positions on * different chips. look at registers. */ - if (!sky2_is_copper(hw)) { + if (hw->flags & SKY2_HW_FIBRE_PHY) { /* Shift for bits in fiber PHY */ advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM); lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM); @@ -2593,23 +2584,56 @@ static int __devinit sky2_init(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_CLR); hw->chip_id = sky2_read8(hw, B2_CHIP_ID); - if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) { + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + + switch(hw->chip_id) { + case CHIP_ID_YUKON_XL: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_RAMBUFFER; + break; + + case CHIP_ID_YUKON_EC_U: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_ADV_POWER_CTL; + break; + + case CHIP_ID_YUKON_EX: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_NEW_LE + | SKY2_HW_ADV_POWER_CTL; + + /* New transmit checksum */ + if (hw->chip_rev != CHIP_REV_YU_EX_B0) + hw->flags |= SKY2_HW_AUTO_TX_SUM; + break; + + case CHIP_ID_YUKON_EC: + /* This rev is really old, and requires untested workarounds */ + if (hw->chip_rev == CHIP_REV_YU_EC_A1) { + dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); + return -EOPNOTSUPP; + } + hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER; + break; + + case CHIP_ID_YUKON_FE: + hw->flags = SKY2_HW_RAMBUFFER; + break; + + default: dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", hw->chip_id); return -EOPNOTSUPP; } - hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); + if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') + hw->flags |= SKY2_HW_FIBRE_PHY; - /* This rev is really old, and requires untested workarounds */ - if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) { - dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n", - yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], - hw->chip_id, hw->chip_rev); - return -EOPNOTSUPP; - } - hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { @@ -2821,7 +2845,7 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw) | SUPPORTED_100baseT_Full | SUPPORTED_Autoneg | SUPPORTED_TP; - if (hw->chip_id != CHIP_ID_YUKON_FE) + if (hw->flags & SKY2_HW_GIGABIT) modes |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; return modes; @@ -3851,7 +3875,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) return IRQ_NONE; if (status & Y2_IS_IRQ_SW) { - hw->msi = 1; + hw->flags |= SKY2_HW_USE_MSI; wake_up(&hw->msi_wait); sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); } @@ -3879,9 +3903,9 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); sky2_read8(hw, B0_CTST); - wait_event_timeout(hw->msi_wait, hw->msi, HZ/10); + wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10); - if (!hw->msi) { + if (!(hw->flags & SKY2_HW_USE_MSI)) { /* MSI test failed, go back to INTx mode */ dev_info(&pdev->dev, "No interrupt generated using MSI, " "switching to INTx mode.\n"); @@ -4014,7 +4038,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED, + err = request_irq(pdev->irq, sky2_intr, + (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, dev->name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); @@ -4047,7 +4072,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - if (hw->msi) + if (hw->flags & SKY2_HW_USE_MSI) pci_disable_msi(pdev); unregister_netdev(dev); err_out_free_netdev: @@ -4096,7 +4121,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - if (hw->msi) + if (hw->flags & SKY2_HW_USE_MSI) pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 3baae48f804..af303496f9e 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2040,6 +2040,15 @@ struct sky2_hw { void __iomem *regs; struct pci_dev *pdev; struct net_device *dev[2]; + unsigned long flags; +#define SKY2_HW_USE_MSI 0x00000001 +#define SKY2_HW_FIBRE_PHY 0x00000002 +#define SKY2_HW_GIGABIT 0x00000004 +#define SKY2_HW_NEWER_PHY 0x00000008 +#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */ +#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ +#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ +#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ u8 chip_id; u8 chip_rev; @@ -2053,13 +2062,12 @@ struct sky2_hw { struct timer_list watchdog_timer; struct work_struct restart_work; - int msi; wait_queue_head_t msi_wait; }; static inline int sky2_is_copper(const struct sky2_hw *hw) { - return !(hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P'); + return !(hw->flags & SKY2_HW_FIBRE_PHY); } /* Register accessor for memory mapped device */ -- cgit v1.2.3 From 05745c4ab1c58fbb6ab8e8d3a40e0e395d7e2b0e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:45 -0700 Subject: sky2: fe+ chip support Add support for newest Marvell chips. The Yukon FE plus chip is found in some not yet released laptops. Tested on hardware evaluation boards. This version of the patch is for 2.6.23. It supersedes the two previous patches that are sitting in netdev-2.6 (upstream branch). Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 136 ++++++++++++++++++++++++++++++++++++++++------------- drivers/net/sky2.h | 18 +++++-- 2 files changed, 117 insertions(+), 37 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 060951a8022..d0e5875628e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -118,12 +118,15 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ @@ -147,6 +150,7 @@ static const char *yukon2_name[] = { "Extreme", /* 0xb5 */ "EC", /* 0xb6 */ "FE", /* 0xb7 */ + "FE+", /* 0xb8 */ }; static void sky2_set_multicast(struct net_device *dev); @@ -331,7 +335,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); if (sky2_is_copper(hw)) { - if (hw->chip_id == CHIP_ID_YUKON_FE) { + if (!(hw->flags & SKY2_HW_GIGABIT)) { /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; } else { @@ -450,7 +454,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gma_write16(hw, port, GM_GP_CTRL, reg); - if (hw->chip_id != CHIP_ID_YUKON_FE) + if (hw->flags & SKY2_HW_GIGABIT) gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); @@ -474,6 +478,23 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); break; + case CHIP_ID_YUKON_FE_P: + /* Enable Link Partner Next Page */ + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + ctrl |= PHY_M_PC_ENA_LIP_NP; + + /* disable Energy Detect and enable scrambler */ + ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */ + ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) | + PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) | + PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED); + + gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); + break; + case CHIP_ID_YUKON_XL: pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); @@ -543,7 +564,13 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* set page register to 0 */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); + } else if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) { + /* apply workaround for integrated resistors calibration */ + gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); + gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); } else if (hw->chip_id != CHIP_ID_YUKON_EX) { + /* no effect on Yukon-XL */ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { @@ -664,25 +691,25 @@ static void sky2_wol_init(struct sky2_port *sky2) static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) { - if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev != CHIP_REV_YU_EX_A0) { + struct net_device *dev = hw->dev[port]; + + if (dev->mtu <= ETH_DATA_LEN) sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - TX_STFW_ENA | - (hw->dev[port]->mtu > ETH_DATA_LEN) ? TX_JUMBO_ENA : TX_JUMBO_DIS); - } else { - if (hw->dev[port]->mtu > ETH_DATA_LEN) { - /* set Tx GMAC FIFO Almost Empty Threshold */ - sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), - (ECU_JUMBO_WM << 16) | ECU_AE_THR); + TX_JUMBO_DIS | TX_STFW_ENA); + + else if (hw->chip_id != CHIP_ID_YUKON_EC_U) + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_STFW_ENA | TX_JUMBO_ENA); + else { + /* set Tx GMAC FIFO Almost Empty Threshold */ + sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), + (ECU_JUMBO_WM << 16) | ECU_AE_THR); - sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - TX_JUMBO_ENA | TX_STFW_DIS); + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_JUMBO_ENA | TX_STFW_DIS); - /* Can't do offload because of lack of store/forward */ - hw->dev[port]->features &= ~(NETIF_F_TSO | NETIF_F_SG - | NETIF_F_ALL_CSUM); - } else - sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - TX_JUMBO_DIS | TX_STFW_ENA); + /* Can't do offload because of lack of store/forward */ + dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM); } } @@ -768,7 +795,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Configure Rx MAC FIFO */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON; - if (hw->chip_id == CHIP_ID_YUKON_EX) + if (hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) rx_reg |= GMF_RX_OVER_ON; sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); @@ -777,7 +805,12 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ - sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1); + reg = RX_GMF_FL_THR_DEF + 1; + /* Another magic mystery workaround from sk98lin */ + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) + reg = 0x178; + sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg); /* Configure Tx MAC FIFO */ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); @@ -1704,8 +1737,12 @@ static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) if (hw->flags & SKY2_HW_FIBRE_PHY) return SPEED_1000; - if (hw->chip_id == CHIP_ID_YUKON_FE) - return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; + if (!(hw->flags & SKY2_HW_GIGABIT)) { + if (aux & PHY_M_PS_SPEED_100) + return SPEED_100; + else + return SPEED_10; + } switch (aux & PHY_M_PS_SPEED_MSK) { case PHY_M_PS_SPEED_1000: @@ -1949,7 +1986,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; - if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_FE) + if (new_mtu > ETH_DATA_LEN && + (hw->chip_id == CHIP_ID_YUKON_FE || + hw->chip_id == CHIP_ID_YUKON_FE_P)) return -EINVAL; if (!netif_running(dev)) { @@ -1966,7 +2005,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) synchronize_irq(hw->pdev->irq); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) + if (!(hw->flags & SKY2_HW_RAMBUFFER)) sky2_set_tx_stfwd(hw, port); ctl = gma_read16(hw, port, GM_GP_CTRL); @@ -2205,7 +2244,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) } /* This chip reports checksum status differently */ - if (hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_NEW_LE) { if (sky2->rx_csum && (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) && (le->css & CSS_TCPUDPCSOK)) @@ -2246,8 +2285,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) if (!sky2->rx_csum) break; - if (hw->chip_id == CHIP_ID_YUKON_EX) + /* If this happens then driver assuming wrong format */ + if (unlikely(hw->flags & SKY2_HW_NEW_LE)) { + if (net_ratelimit()) + printk(KERN_NOTICE "%s: unexpected" + " checksum status\n", + dev->name); break; + } /* Both checksum counters are programmed to start at * the same offset, so unless there is a problem they @@ -2549,17 +2594,25 @@ static void sky2_netpoll(struct net_device *dev) #endif /* Chip internal frequency for clock calculations */ -static inline u32 sky2_mhz(const struct sky2_hw *hw) +static u32 sky2_mhz(const struct sky2_hw *hw) { switch (hw->chip_id) { case CHIP_ID_YUKON_EC: case CHIP_ID_YUKON_EC_U: case CHIP_ID_YUKON_EX: - return 125; /* 125 Mhz */ + return 125; + case CHIP_ID_YUKON_FE: - return 100; /* 100 Mhz */ - default: /* YUKON_XL */ - return 156; /* 156 Mhz */ + return 100; + + case CHIP_ID_YUKON_FE_P: + return 50; + + case CHIP_ID_YUKON_XL: + return 156; + + default: + BUG(); } } @@ -2623,6 +2676,12 @@ static int __devinit sky2_init(struct sky2_hw *hw) hw->flags = SKY2_HW_RAMBUFFER; break; + case CHIP_ID_YUKON_FE_P: + hw->flags = SKY2_HW_NEWER_PHY + | SKY2_HW_NEW_LE + | SKY2_HW_AUTO_TX_SUM + | SKY2_HW_ADV_POWER_CTL; + break; default: dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", hw->chip_id); @@ -2827,7 +2886,9 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) sky2->wol = wol->wolopts; - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) sky2_write32(hw, B0_CTST, sky2->wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); @@ -3820,6 +3881,13 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); + /* This chip has hardware problems that generates + * bogus PHY receive status so by default shut up the message. + */ + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) + sky2->msg_enable &= ~NETIF_MSG_RX_ERR; + /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; sky2->flow_mode = FC_BOTH; @@ -4189,7 +4257,9 @@ static int sky2_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D0, 0); /* Re-enable all clocks */ - if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U) + if (hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_FE_P) sky2_pci_write32(hw, PCI_DEV_REG3, 0); sky2_reset(hw); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index af303496f9e..a05b30b68fa 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -470,18 +470,24 @@ enum { CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ - + CHIP_ID_YUKON_FE_P = 0xb8, /* Chip ID for YUKON-2 FE+ */ +}; +enum yukon_ec_rev { CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */ CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */ CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */ - +}; +enum yukon_ec_u_rev { CHIP_REV_YU_EC_U_A0 = 1, CHIP_REV_YU_EC_U_A1 = 2, CHIP_REV_YU_EC_U_B0 = 3, - +}; +enum yukon_fe_rev { CHIP_REV_YU_FE_A1 = 1, CHIP_REV_YU_FE_A2 = 2, - +}; +enum yukon_fe_p_rev { + CHIP_REV_YU_FE2_A0 = 0, }; enum yukon_ex_rev { CHIP_REV_YU_EX_A0 = 1, @@ -1729,6 +1735,10 @@ enum { GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON, }; +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +enum { + TX_DYN_WM_ENA = 3, /* Yukon-FE+ specific */ +}; /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ enum { -- cgit v1.2.3 From 75e806838a3327d4ca9030e588d34de11b04f341 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:46 -0700 Subject: sky2: receive FIFO checking A driver writer from another operating system hinted that the versions of Yukon 2 chip with rambuffer (EC and XL) have a hardware bug that if the FIFO ever gets completely full it will hang. Sounds like a classic ring full vs ring empty wrap around bug. As a workaround, use the existing watchdog timer to check for ring full lockup. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 74 ++++++++++++++++++++++++++++++++++++++++++------------ drivers/net/sky2.h | 9 ++++++- 2 files changed, 66 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d0e5875628e..2831f44e627 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1648,9 +1648,6 @@ static int sky2_down(struct net_device *dev) if (netif_msg_ifdown(sky2)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); - if (netif_carrier_ok(dev) && --hw->active == 0) - del_timer(&hw->watchdog_timer); - /* Stop more packets from being queued */ netif_stop_queue(dev); @@ -1775,9 +1772,7 @@ static void sky2_link_up(struct sky2_port *sky2) netif_carrier_on(sky2->netdev); - if (hw->active++ == 0) - mod_timer(&hw->watchdog_timer, jiffies + 1); - + mod_timer(&hw->watchdog_timer, jiffies + 1); /* Turn on link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), @@ -1828,11 +1823,6 @@ static void sky2_link_down(struct sky2_port *sky2) netif_carrier_off(sky2->netdev); - /* Stop watchdog if both ports are not active */ - if (--hw->active == 0) - del_timer(&hw->watchdog_timer); - - /* Turn on link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); @@ -2484,20 +2474,72 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port, sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK); } -/* Check for lost IRQ once a second */ +static int sky2_rx_hung(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + unsigned rxq = rxqaddr[port]; + u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP)); + u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV)); + u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP)); + u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL)); + + /* If idle and MAC or PCI is stuck */ + if (sky2->check.last == dev->last_rx && + ((mac_rp == sky2->check.mac_rp && + mac_lev != 0 && mac_lev >= sky2->check.mac_lev) || + /* Check if the PCI RX hang */ + (fifo_rp == sky2->check.fifo_rp && + fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) { + printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n", + dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp, + sky2_read8(hw, Q_ADDR(rxq, Q_WP))); + return 1; + } else { + sky2->check.last = dev->last_rx; + sky2->check.mac_rp = mac_rp; + sky2->check.mac_lev = mac_lev; + sky2->check.fifo_rp = fifo_rp; + sky2->check.fifo_lev = fifo_lev; + return 0; + } +} + static void sky2_watchdog(unsigned long arg) { struct sky2_hw *hw = (struct sky2_hw *) arg; + struct net_device *dev; + /* Check for lost IRQ once a second */ if (sky2_read32(hw, B0_ISRC)) { - struct net_device *dev = hw->dev[0]; - + dev = hw->dev[0]; if (__netif_rx_schedule_prep(dev)) __netif_rx_schedule(dev); + } else { + int i, active = 0; + + for (i = 0; i < hw->ports; i++) { + dev = hw->dev[i]; + if (!netif_running(dev)) + continue; + ++active; + + /* For chips with Rx FIFO, check if stuck */ + if ((hw->flags & SKY2_HW_RAMBUFFER) && + sky2_rx_hung(dev)) { + pr_info(PFX "%s: receiver hang detected\n", + dev->name); + schedule_work(&hw->restart_work); + return; + } + } + + if (active == 0) + return; } - if (hw->active > 0) - mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); + mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); } /* Hardware/software error handling */ diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index a05b30b68fa..69cd98400fe 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2027,6 +2027,14 @@ struct sky2_port { u16 rx_tag; struct vlan_group *vlgrp; #endif + struct { + unsigned long last; + u32 mac_rp; + u8 mac_lev; + u8 fifo_rp; + u8 fifo_lev; + } check; + dma_addr_t rx_le_map; dma_addr_t tx_le_map; @@ -2064,7 +2072,6 @@ struct sky2_hw { u8 chip_rev; u8 pmd_type; u8 ports; - u8 active; struct sky2_status_le *st_le; u32 st_idx; -- cgit v1.2.3 From faf60e72d07d163a623e47269680918fccaa789a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:47 -0700 Subject: sky2: version 1.18 Update version number Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2831f44e627..eaffe551d1d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -51,7 +51,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.17" +#define DRV_VERSION "1.18" #define PFX DRV_NAME " " /* -- cgit v1.2.3