From 93b1b37f6a4de8bce17f55d9cfa10ef5c8c04e8a Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Thu, 17 Sep 2009 09:24:58 +0530 Subject: ath9k: Revamp PCIE workarounds * Disable L1 state ONLY when device is in D3 mode. * Clear bit 22 of register 0x4004. * Handle power on/off properly Not setting the workarounds properly resulted in the disappearance of the card in certain cases. Signed-off-by: Vivek Natarajan Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 162 ++++++++++++++++++++-------------- drivers/net/wireless/ath/ath9k/hw.h | 2 +- drivers/net/wireless/ath/ath9k/main.c | 8 +- drivers/net/wireless/ath/ath9k/reg.h | 3 +- 4 files changed, 103 insertions(+), 72 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b6c6cca0781..82a24408528 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -965,7 +965,7 @@ int ath9k_hw_init(struct ath_hw *ah) ath9k_hw_init_mode_regs(ah); if (ah->is_pciexpress) - ath9k_hw_configpcipowersave(ah, 0); + ath9k_hw_configpcipowersave(ah, 0, 0); else ath9k_hw_disablepcie(ah); @@ -3005,9 +3005,10 @@ void ath9k_ps_restore(struct ath_softc *sc) * Programming the SerDes must go through the same 288 bit serial shift * register as the other analog registers. Hence the 9 writes. */ -void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore) +void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off) { u8 i; + u32 val; if (ah->is_pciexpress != true) return; @@ -3017,84 +3018,113 @@ void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore) return; /* Nothing to do on restore for 11N */ - if (restore) - return; - - if (AR_SREV_9280_20_OR_LATER(ah)) { - /* - * AR9280 2.0 or later chips use SerDes values from the - * initvals.h initialized depending on chipset during - * ath9k_hw_init() - */ - for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) { - REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0), - INI_RA(&ah->iniPcieSerdes, i, 1)); - } - } else if (AR_SREV_9280(ah) && - (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) { - REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00); - REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); + if (!restore) { + if (AR_SREV_9280_20_OR_LATER(ah)) { + /* + * AR9280 2.0 or later chips use SerDes values from the + * initvals.h initialized depending on chipset during + * ath9k_hw_init() + */ + for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) { + REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0), + INI_RA(&ah->iniPcieSerdes, i, 1)); + } + } else if (AR_SREV_9280(ah) && + (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) { + REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00); + REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); + + /* RX shut off when elecidle is asserted */ + REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019); + REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820); + REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560); + + /* Shut off CLKREQ active in L1 */ + if (ah->config.pcie_clock_req) + REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc); + else + REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd); - /* RX shut off when elecidle is asserted */ - REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019); - REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820); - REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560); + REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); + REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); + REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007); - /* Shut off CLKREQ active in L1 */ - if (ah->config.pcie_clock_req) - REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc); - else - REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd); + /* Load the new settings */ + REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); - REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); - REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); - REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007); + } else { + REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); + REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); - /* Load the new settings */ - REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); + /* RX shut off when elecidle is asserted */ + REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039); + REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824); + REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579); - } else { - REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); - REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); + /* + * Ignore ah->ah_config.pcie_clock_req setting for + * pre-AR9280 11n + */ + REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff); - /* RX shut off when elecidle is asserted */ - REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039); - REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824); - REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579); + REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); + REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); + REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007); - /* - * Ignore ah->ah_config.pcie_clock_req setting for - * pre-AR9280 11n - */ - REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff); + /* Load the new settings */ + REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); + } - REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); - REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); - REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007); + udelay(1000); - /* Load the new settings */ - REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); - } + /* set bit 19 to allow forcing of pcie core into L1 state */ + REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); - udelay(1000); + /* Several PCIe massages to ensure proper behaviour */ + if (ah->config.pcie_waen) { + val = ah->config.pcie_waen; + if (!power_off) + val &= (~AR_WA_D3_L1_DISABLE); + } else { + if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || + AR_SREV_9287(ah)) { + val = AR9285_WA_DEFAULT; + if (!power_off) + val &= (~AR_WA_D3_L1_DISABLE); + } else if (AR_SREV_9280(ah)) { + /* + * On AR9280 chips bit 22 of 0x4004 needs to be + * set otherwise card may disappear. + */ + val = AR9280_WA_DEFAULT; + if (!power_off) + val &= (~AR_WA_D3_L1_DISABLE); + } else + val = AR_WA_DEFAULT; + } - /* set bit 19 to allow forcing of pcie core into L1 state */ - REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); + REG_WRITE(ah, AR_WA, val); + } - /* Several PCIe massages to ensure proper behaviour */ - if (ah->config.pcie_waen) { - REG_WRITE(ah, AR_WA, ah->config.pcie_waen); - } else { - if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) - REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT); + if (power_off) { /* - * On AR9280 chips bit 22 of 0x4004 needs to be set to - * otherwise card may disappear. + * Set PCIe workaround bits + * bit 14 in WA register (disable L1) should only + * be set when device enters D3 and be cleared + * when device comes back to D0. */ - else if (AR_SREV_9280(ah)) - REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT); - else - REG_WRITE(ah, AR_WA, AR_WA_DEFAULT); + if (ah->config.pcie_waen) { + if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE) + REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE); + } else { + if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) || + AR_SREV_9287(ah)) && + (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) || + (AR_SREV_9280(ah) && + (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) { + REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE); + } + } } } diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 9106a0b537d..75c3041aadc 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -650,7 +650,7 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah, const struct ath9k_beacon_state *bs); bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode); -void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore); +void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off); /* Interrupt Handling */ bool ath9k_hw_intrpend(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3dc7b5a13e6..5055f1842b8 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1131,7 +1131,7 @@ void ath_radio_enable(struct ath_softc *sc) int r; ath9k_ps_wakeup(sc); - ath9k_hw_configpcipowersave(ah, 0); + ath9k_hw_configpcipowersave(ah, 0, 0); if (!ah->curchan) ah->curchan = ath_get_curchannel(sc, sc->hw); @@ -1202,7 +1202,7 @@ void ath_radio_disable(struct ath_softc *sc) spin_unlock_bh(&sc->sc_resetlock); ath9k_hw_phy_disable(ah); - ath9k_hw_configpcipowersave(ah, 1); + ath9k_hw_configpcipowersave(ah, 1, 1); ath9k_ps_restore(sc); ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); } @@ -1942,7 +1942,7 @@ static int ath9k_start(struct ieee80211_hw *hw) init_channel = ath_get_curchannel(sc, hw); /* Reset SERDES registers */ - ath9k_hw_configpcipowersave(sc->sc_ah, 0); + ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0); /* * The basic interface to setting the hardware in a good @@ -2170,7 +2170,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); - ath9k_hw_configpcipowersave(sc->sc_ah, 1); + ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1); ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); sc->sc_flags |= SC_OP_INVALID; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index e5c29eb86e8..d83b77f821e 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -676,8 +676,9 @@ #define AR_RC_HOSTIF 0x00000100 #define AR_WA 0x4004 +#define AR_WA_D3_L1_DISABLE (1 << 14) #define AR9285_WA_DEFAULT 0x004a05cb -#define AR9280_WA_DEFAULT 0x0040073f +#define AR9280_WA_DEFAULT 0x0040073b #define AR_WA_DEFAULT 0x0000073f -- cgit v1.2.3